Phoenix Inverters www.victronenergy.com 1200VA – 5000VA (per module) SinusMax - Superior engineering Developed for professional duty, the Phoenix range of inverters is suitable for the widest range of applications. The design criteria have been to produce a true sine wave inverter with optimised efficiency but without compromise in performance. Employing hybrid HF technology, the result is a top quality product with compact dimensions, light in weight and capable of supplying power, problem-free, to any load. Extra start-up power A unique feature of the SinusMax technology is very high start-up power. Conventional high frequency technology does not offer such extreme performance. Phoenix inverters, however, are well suited to power up difficult loads such as refrigeration compressors, electric motors and similar appliances. Virtually unlimited power thanks to parallel and 3-phase operation capability Up to 6 units inverters can operate in parallel to achieve higher power output. Six 24/5000 units, for example, will provide 24kW / 30kVA output power. Operation in 3-phase configuration is also possible. Phoenix Inverter 24/5000 To transfer the load to another AC source: the automatic transfer switch If an automatic transfer switch is required we recommend using the MultiPlus inverter/charger instead. The switch is included in these products and the charger function of the MultiPlus can be disabled. Computers and other electronic equipment will continue to operate without disruption because the MultiPlus features a very short switchover time (less than 20 milliseconds). Computer interface All models have a RS-485 port. All you need to connect to your PC is our MK2 interface (see under accessories). This interface takes care of galvanic isolation between the inverter and the computer, and converts from RS-485 to RS-232. A RS-232 to USB conversion cable is also available. Together with our VEConfigure software, which can be downloaded free of charge from our website, all parameters of the inverters can be customised. This includes output voltage and frequency, over and under voltage settings and programming the relay. This relay can for example be used to signal several alarm conditions, or to start a generator. The inverters can also be connected to VENet, the new power control network of Victron Energy, or to other computerised monitoring and control systems. New applications of high power inverters The possibilities of paralleled high power inverters are truly amazing. For ideas, examples and battery capacity calculations please refer to our book “Energy Unlimited” (available free of charge from Victron Energy and downloadable from www.victronenergy.com). Phoenix Inverter Compact 24/1600 Victron Energy B.V. | De Paal 35 | 1351 JG Almere | The Netherlands General phone: +31 (0)36 535 97 00 | Fax: +31 (0)36 535 97 40 E-mail: [email protected] | www.victronenergy.com Phoenix Inverter C12/1200 C24/1200 C12/1600 C24/1600 C12/2000 C24/2000 Parallel and 3-phase operation 12/3000 24/3000 48/3000 24/5000 48/5000 Yes INVERTER Input voltage range (V DC) 9,5 – 17V Output 19 – 33V 38 – 66V Output voltage: 230 VAC ±2% Frequency: 50 Hz ± 0,1% (1) Cont. output power at 25 ºC (VA) (2) 1200 1600 2000 3000 5000 Cont. output power at 25 ºC (W) 1000 1300 1600 2500 4500 Cont. output power at 40 ºC (W) 900 1200 1450 2200 4000 Peak power (W) 2400 3000 4000 6000 10000 Max. efficiency 12/ 24 /48 V (%) 92 / 94 92 / 94 92 / 92 93 / 94 / 95 94 / 95 Zero-load power 12 / 24 / 48 V (W) 8 / 10 8 / 10 9 / 11 15 / 15 / 16 25 / 25 Zero-load power in AES mode (W) 5/8 5/8 7/9 10 / 10 / 12 20 / 20 Zero-load power in Search mode (W) 2/3 2/3 3/4 4/5/5 5/6 GENERAL Programmable relay (3) Yes Protection (4) a-g VE.Bus communication port For parallel and three phase operation, remote monitoring and system integration Remote on-off Yes Operating temperature range: -40 to +50 ºC (fan assisted cooling) Humidity (non condensing): max 95% ENCLOSURE Common Characteristics Common Characteristics Battery-connection 230 V AC-connection Material & Colour: aluminum (blue RAL 5012) M8 bolts 2+2 M8 bolts G-ST18i plug Spring-clamp Screw terminals Weight (kg) Dimensions (hxwhd in mm) Protection category: IP 21 battery cables of 1.5 meter included 10 12 18 30 375x214x110 520x255x125 362x258x218 444x328x240 STANDARDS Safety EN 60335-1 Emission Immunity 1) Can be adjusted to 60Hz and to 240V 2) Non linear load, crest factor 3:1 3) Programmable relay that can a.o. be set for general alarm, DC undervoltage or genset start/stop function. AC rating: 230V/4A DC rating: 4a up to 35VDC, 1A up to 60VDC EN 55014-1 / EN 55014-2 4) Protection key: a) output short circuit b) overload c) battery voltage too high d) battery voltage too low e) temperature too high f) 230 V AC on inverter output g) input voltage ripple too high Phoenix Inverter Control Computer controlled operation and monitoring BMV Battery Monitor This panel can also be used on a MultiPlus inverter/charger when an automatic transfer switch but no charger function is desired. The brightness of the LEDs is automatically reduced during night time. Several interfaces are available: - MK2.2 VE.Bus to RS232 converter Connects to the RS232 port of a computer (see ‘A guide to VEConfigure’) - MK2-USB VE.Bus to USB converter Connects to a USB port (see ‘A guide to VEConfigure’) - VE.Net to VE.Bus converter Interface to VE.Net (see VE.Net documentation) - VE.Bus to NMEA 2000 converter - Victron Global Remote The Global Remote is a modem which sends alarms, warnings and system status reports to cellular phones via text messages (SMS). It can also log data from Victron Battery Monitors, Multi’s, Quattro’s and Inverters to a website through a GPRS connection. Access to this website is free of charge. - Victron Ethernet Remote To connect to Ethernet. The BMV Battery Monitor features an advanced microprocessor control system combined with high resolution measuring systems for battery voltage and charge / discharge current. Besides this, the software includes complex calculation algorithms, like Peukert’s formula, to exactly determine the state of charge of the battery. The BMV selectively displays battery voltage, current, consumed Ah or time to go. The monitor also stores a host of data regarding performance and use of the battery. Victron Energy B.V. | De Paal 35 | 1351 JG Almere | The Netherlands General phone: +31 (0)36 535 97 00 | Fax: +31 (0)36 535 97 40 E-mail: [email protected] | www.victronenergy.com Several models available (see battery monitor documentation).
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project