Datalogic DS2100N-2210 Datasheet

Add to my manuals
6 Pages

advertisement

Datalogic DS2100N-2210 Datasheet | Manualzz

DS2100N & DS2400N

Enhanced

Connectivity

Ease of use

Configuration

SW Tool

ACR-Lite

APPLICATIONS

• Small conveyor sorting

• Picking systems

• Items and parts tracking

• Process control and packaging

• Document Handling machines

• Print & Apply systems

www.automation.datalogic.com

32

ADVANTAGeS

• Decoding of partially damaged or normally unreadable barcodes due to high tilt angle thanks to the embedded ACR-

Lite technology

• Easy and rapid scanner configuration thanks to Datalogic

Genius™ intuitive and multilanguage software tool.

• Overall cost reduction and simple network wiring thanks to

ID-NET™ embedded high-speed connectivity

• Extended Fieldbus and Ethernet connectivity through a complete range of modular connection boxes and accessories

hIGhLIGhTS

• Increased read rate on low contrast and dirty bar codes

• ACR-Lite

• ID-NET™ embedded interface for highspeed communication networks

• Intuitive X-PRESS™ interface for quick scanner installation and troubleshooting

• Easy setup through multilanguage

Genius™ software tool

• Motor on/off and motor speed control via software commands

• IP65 (NEMA 4) rugged industrial housing

GeNeRAL DeSCRIPTION

DS2100N and DS2400N are designed to offer ease of use combined with excellent reading performance.

Typical applications are in automated warehousing (conveyor sorting and picking systems), automated shop floor (for items and parts tracking), process control and packaging. In OEM integration these scanners are suitable for integration into automatic machinery (chemical and biomedical analysis machines) and in packaging and document handling machines.

These scanners guarantee high reading performance thanks to the high performance optics and ACR-Lite code reconstruction technology.

DS2100N and DS2400N are equipped with the innovative X-PRESS™ Human

Machine Interface, granting easy scanner installation and maintenance. This interface clearly presents status and diagnostic information by means of a five

LED bar graph, while the single multi-function key gives immediate access to relevant functions such as Test Mode, Auto Learn and Auto Setup.

33

DS2100N & DS2400N

ReADING DIAGRAMS

DS2100N-1200

(Standard Resolution, 500 scans/s)

0 1 2 3 4 5 6 7 8 9 10 11 12

0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300

5

120

(in)

(mm)

4 100

3

80

60

2

1

40

20

0

0.20 mm

(8 mils)

0

1

2

3

20

40

60

80

4

100

5

(in)

120

(mm)

CONDITIONS

Optic Version = Linear

Code = Interleaved 2/5 or Code 39

PCS = 0.90

Pitch angle = 0°

Skew angle = 15°

Tilt angle = 0°

* Reading Conditions = Standard

* Parameter selectable in Genius

0.30 mm

(12 mils)

0.35 mm

(14 mils) ≥ 0.50 mm

(20 mils)

DS2400N-0200

(Short Reading Range)

DS2100N-2200

(High Resolution, 500 scans/s)

CONDITIONS

Optic Version = Linear

Code = Interleaved 2/5 or Code 39

PCS = 0.90

Pitch angle = 0°

Skew angle = 15°

Tilt angle = 0°

* Reading Conditions = Standard

* Parameter selectable in Genius

DS2400N-1200

(Medium Reading Range)

CONDITIONS

Optic Version = Linear

Code = Interleaved 2/5 or Code 39

PCS = 0.90

Pitch angle = 0°

Skew angle = 10°

Tilt angle = 0°

* Code Resolution = High

* Reading Conditions = Standard

* Scan Speed = Speed_3 (800 scans/s)

* Parameter selectable in Genius

www.automation.datalogic.com

34

CONDITIONS

Optic Version = Linear

Code = Interleaved 2/5 or Code 39

PCS = 0.90

Pitch angle = 0°

Skew angle = 10°

Tilt angle = 0°

* Code Resolution:

High – for 0.25 mm (10 mils) codes

Std – for 0.35 mm (14 mils) codes and greater

* Reading Conditions = Standard

* Scan Speed = Speed_3 (800 scans/s)

* Parameters selectable in Genius.

ReADING DIAGRAMS

DS2100N-1204 hIGh PeRFORMANCe

(Standard Resolution, 1000 scan/s)

DS2100N-2204

High Performance - (High Resolution, 1000 scans/s)

CONDITIONS

Optic Version = Linear

Code = Interleaved 2/5 or Code 39

PCS = 0.90

Pitch angle = 0°

Skew angle = 15°

Tilt angle = 0°

*Code Resolution:

High - for 0.30 mm (12 mils) codes and smaller

Standard - for 0.50 mm (20 mils) codes and greater

*Reading Conditions = Standard

* Parameter selectable in Genius

DS2400N-2200

(Long Reading Range)

CONDITIONS

Optic Version = Linear

Code = Interleaved 2/5 or Code 39

PCS = 0.90

Pitch angle = 0°

Skew angle = 15°

Tilt angle = 0°

*Code Resolution:

High - for 0.15 mm (6 mils) codes and smaller

Standard - for 0.20 mm (8 mils) codes

*Reading Conditions = Standard

* Parameter selectable in Genius

CONDITIONS

Optic Version = Linear

Code = Interleaved 2/5 or Code 39

PCS = 0.90

Pitch angle = 0°

Skew angle = 10°

Tilt angle = 0°

* Code Resolution:

High – for 0.35 mm (14 mils) codes

Std – for 0.50 mm (20 mils) codes and greater

* Reading Conditions = Standard

* Scan Speed = Speed_3 (800 scans/s)

* Parameters selectable in Genius.

35

DS2100N & DS2400N

DIMeNSIONS

mm / inch

eLeCTRICAL CONNeCTIONS

All DS2100N and DS2400N models are equipped with a cable terminated by a 25-pin male D-sub connector for connection to the power supply and input/output signals

25-pin Female D-sub Connector

3

4

5

18

19

6

10

25-PIN D-SUB MALe CONNeCTOR PINOUT

Pin Name

13,9 VDC

25,7

1

GND

CHASSIS

I1A

I1B

I2A

I2B

20

21

23

24

8

22

11

12

14,15,16,17

Pin

2

O1+

O1-

O2+

O2-

RX

TX

ID+

ID-

NC

RS232

Main Interface Signals

RS232

TX

RX

RTS

CTS

* Do not leave floating, see DS2100N and DS2400N Reference Manuals for connection details.

Function

Power supply input voltage +

Power supply input voltage -

Cable shield connected to chassis

External Trigger A (polarity insensitive)

External Trigger B (polarity insensitive)

Input 2 A (polarity insensitive)

Input 2 B (polarity insensitive)

Output 1 +

Output 1 -

Output 2 +

Output 2 -

Auxiliary Interface RX

Auxiliary Interface TX

ID-NET™ network +

ID-NET™ network -

Not Connected

RS485 Full-Duplex

TX+

* RX+

TX-

* RX-

RS485 half-Duplex

RTX+

RTX-

www.automation.datalogic.com

36

MODeLS AND ACCeSSORIeS

MODeLS

Order No.

930153183

930153184

930153185

930153186

930153187

930153189

930153188

930153190

930181379

930181380

930181381

930181382

930181383

930181384

ACCeSSORIeS

Order No.

93ACC1839

93A201108

93A201080

TeChNICAL DATA

DIMENSIONS

WEIGHT

CASE MATERIAL

OPERATING TEMPERATURE

STORAGE TEMPERATURE

HUMIDITY

VIBRATION RESISTANCE

SHOCK RESISTANCE

PROTECTION CLASS

LIGHT SOURCE

SCANNING SPEED

RESOLUTION

APERTURE ANGLE

READABLE CODES

MULTILABEL READING

COMMUNICATION INTERFACES

CONNECTIVITY MODES

DIGITAL INPUTS

DIGITAL OUTPUTS

DEVICE PROGRAMMING

OPERATING MODES

USER INTERFACE

LASER CLASSIFICATION

LASER CONTROL

MOTOR CONTROL

POWER SUPPLY

POWER CONSUMPTION

Description

DS2100N-1200 STD RESOLUTION, LINEAR, NSC

DS2100N-2200 HIGH RESOLUTION, LINEAR, NSC

DS2100N-1210 STD RESOLUTION, RASTER, NSC

DS2100N-2210 HIGH RESOLUTION, RASTER, NSC

DS2100N-1204 STD RESOLUTION, LINEAR, HI PERF, NSC

DS2100N-2204 HIGH RESOLUTION, LINEAR, HI PERF, NSC

DS2100N-1214 STD RESOLUTION, RASTER, HI PERF, NSC

DS2100N-2214 HIGH RESOLUTION, RASTER, HI PERF, NSC

DS2400N 0200 SHORT RANGE, LINEAR, NSC

DS2400N 0210 SHORT RANGE, RASTER, NSC

DS2400N 1200 MEDIUM RANGE, LINEAR, NSC

DS2400N 1210 MEDIUM RANGE, RASTER, NSC

DS2400N 2200 LONG RANGE, LINEAR, NSC

DS2400N 2210 LONG RANGE, RASTER, NSC

Description

OM2000N OSCILLATING MIRROR, NSC

GFC-200 85° MIRROR CONTACT READING, NSC

GFC-2000 105° READING MIRROR

84 x 68 x 34 mm (3.31 x 2.68 x 1.34 in)

330 g (11.6 oz)

Aluminum

0° to +45 °C (+32° to +113 °F)

-20 to 70 °C (-4 to 158 °F)

90% non condensing

IEC 68-2-6 test FC 1.5mm; 10 to 55 Hz; 2 hours on each axis

IEC 68-2-27 test EA 30 G; 11 ms; 3 shocks on each axis

IP65

Visible laser diode (630 to 680 nm)

DS2100N

500 to 1000 scans/sec

Up to 0.12 mm (5 mils)

60 degrees

DS2400N

600 to 1000 scans/sec

Up to 0.20 mm (8 mils)

50 degrees

Code 2/5, Code39, Code93, Code128, EAN/UPC, EAN128, Codabar, Pharmacode, Plessey, ISBT128

Up to 10 different symbologies during the same reading phase

Main port RS232/RS422/RS485 up to 115.2 Kbit/s

Auxiliary port RS232 up to 115.2 kbps

ID-NET™ port up to 1 Mbps

Pass Through, Master/Slave, Multiplexer

External Trigger (optocoupled, NPN/PNP), IN2 ( not optocoupled, NPN only)

Two SW programmable, event driven, optocoupled

X-PRESS™ Human Machine Interface

Windows™ based SW (Genius™) via serial link

Serial Host Mode Programming sequences

‘On-line’, ‘Serial On-line’, ‘Automatic’, ‘Continuous’, ‘Test’, ‘Verifier’

X-PRESS™ Human Machine Interface

Programmable Push Button, LEDs (Status, Com, Trigger, Good, Ready, Power On, Good read Spot)

IEC 825-1 Class2; CDRH Class II

Safety system to turn laser off in cases of motor slowdown or failure

Motor On/Off command string and Motor Speed SW programmable

DS2100N

10 to 30 VDC

DS2400N

10 to 30 VDC

3W (xxx0 models), 5W (xxx4 models) 5W

37

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement