Yamaha ATS-2030 Quick start guide

Yamaha ATS-2030 Quick start guide
ATS-2030 Quick Start Guide
Supplied items
Before assembling and connecting, make sure you have received all of the following items.
If anything is missing, please call 888-892-6242, 8AM to 5PM PST Monday through Friday.
Sound bar (ATS-CU2030)
Mounting template
(Use when attaching the sound bar to a wall.)
Wireless subwoofer
Remote control
Two AAA batteries
(Install the batteries in
the remote control.)
Optical cable
1.5 m (4.9 ft)
RCA stereo cable
1.5 m (4.9 ft)
Stand × 2
Screw × 2
(For sound bar)
(For attaching
the stand)
Owner’s Manual
Quick Start Guide
(This sheet)
Place the sound bar in front of or below your TV, either with or
without a stand, at least 2'' away from your TV.
Place the subwoofer to the outside of the sound bar. To avoid
echoes from the wall, face the front side of the subwoofer
slightly inward.
The sound bar may also be mounted on a wall, using the
included mounting template and commercially available
screws. Refer to the Owner’s Manual for additional mounting
• Be careful not to stack the sound bar/subwoofer with any other components,
as vibration may cause system disruption in other components.
Continued to the reverse side
© 2014 Yamaha Corporation
Printed in Indonesia
Watching TV
Connect the TV and sound bar with the
optical cable (supplied).
Remove the cap of the optical cable and check the
direction of the plug.
For details, refer to the Owner’s Manual.
Turn on the TV and set the volume to
1. Press
Disable the TV speakers using the TV’s audio
settings menu (if available).
2. Press the TV key to select TV as the input source.
Connect the power cable of the sound bar
and subwoofer to AC wall outlets.
If a setting to disable the speaker output is not available on
your TV, you may disable it by connecting headphones to the
headphone jack on the TV. For details, refer to the instruction
manual of the TV.
to turn on the sound bar.
The subwoofer turns on automatically simultaneously with
the sound bar.
3. Select the desired input source on the TV.
4. Press the VOLUME (+/-) keys to adjust the
Playback of a Bluetooth® device
You can connect a Bluetooth device, such as a smartphone or
digital music player, with the sound bar wirelessly. For details,
refer to the Owner’s Manual.
Sound bar (rear)
Connect to an AC wall outlet.
Leave the unit powered off until
all connections are complete.
Subwoofer (rear)
Optical cable
Coaxial digital cable
(commercially available)
... and more features!
Connect to an AC wall outlet.
Coaxial digital
audio output
If your playback device has a coaxial digital audio output,
you can connect it to the BD/DVD input of the sound bar
with a coaxial digital cable (commercially available).
Set top box or playback device
(such as a Blu-ray DiscTM player)
For details about the other useful features, refer to the
Owner’s Manual.
– TV remote control learning function
– TV Remote Repeater
– Clear voice
– UniVolume
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Yamaha Corporation is under
Blu-ray Disc is a trademark of the Blu-ray Disc Association.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF