Switches Ethernet

Switches Ethernet
A CXR ETHERNET SWITCH FOR YOUR APPLICATION
Industrial and hardened switches
DIN-Rail, 19’’rack or IP-67 enclosure
IEC61850-3 for Electrical Substation Automating System
EN50121-4 for Railway Station
EN50155 & EN50121-3-2 for Rolling Stock & Railway Networks
IEC61000 & Nema TS1/TS2 for Intelligent Traffic System
Hybrid Ethernet with G.Shdsl, fiber & RS232/RS485
Layer 3 switches FE/GE/10GE for Backbone Infrastructures
POE Ethernet IEEE802.3af/3at
SyncE & PTP IEEE 1588V2
Smart solutions for smart networks
How to select the CXR switch order numbers
SSSS-qq-naa-nbb-ncc-pw-ffff
SSSS
SWSWMSW3SWDSWMDSWPSWMPHSWHSWMqq
[
Generic name of the switch
19'' 1U format
19'' 1U format
19'' 1U format
DIN-Rail enclosure
Industrial enclosure with panel fixing
pw
[ ]
[ ]
1A
1D8
2A
2D8
ffff
Layer 2
Plastic box with fiber tray and wall fixing
Unmanageable
for FTTh
Plastic box with fiber tray and wall fixing
Layer 2
for FTTh
Quality and compliance
HR
TPS
TPD
GPS
Layer 2
Unmanageable
Industrial enclosure with panel fixing
Entreprise switch
Industrial switch
naa-nbb-ncc
TX
GX
TGX
FM
FS20
FSF
GS
GL20
GZ20
GSF
USF
CB
UCBO
TM
GM
XFP
SFPP
Layer 3
Unmanageable
DIN-Rail enclosure
]
I
H
HT
HE
Hx67
Unmanageable
Layer 2
EMC
Electrical substation
0 to 50°C
CE
-
-
Hardened switch
-10 to +60°C
- 40 to +75°C
IEC61000-6-2
IEC61000-6-2
-
-
Hardened switch for railway station
- 40 to +75°C
IEC61000-6-2
EN50121-4
-
Hardened switch for electrical substation
- 40 to +75°C
IEC61000-6-2
IEC61850-3, IEEE1613
Hardened switch used on railway rolling stock
- 40 to +75°C
IEC61000-6-2
EN50121-4
EN50155 ,
EN50121-3-2
Hardened switch in IP-67 enclosure
- 40 to +75°C
number of port, type:
10/100BaseT
1000BaseT
10/100/1000BaseT
100FX multimode
100FX singlemode 20 km
Slot for SFP 100FX (always delivered w/o SFP module)
1000SX multimode
1000LX singlemode 1310nm
1000ZX singlemode 1550nm
Slot for SFP 1000SX/LX/ZX (always delivered w/o SFP module)
Slot for universal SFP 100FX or 1000SX/LX/ZX (always delivered w/o SFP module)
Combo w 10/100/1000BaseT and SFP 1000SX/LX/ZX slot (only one port is active at the same time)
Universal Combo w 10/100/1000BaseT and dual rate SFP 100FX / 1000SX/LX/ZX slot (only one port is active at the same time)
10/100BaseT with M12 connector
10/100/1000BaseT with M12 connector
Slot for XFP 10GE module LS/LR/ER/ZR (always delivered w/o XFP module)
Slot for SFP+ 10GE module LS/LR/ER/ZR (always delivered w/o SFP+ module)
100BaseT POE PSE (source) IEEE802,3af or 3at
100BaseT POE PD (Powered devices)
1000BaseT PSE POE (source) IEEE802,3af or 3at
power supply
Entreprise switch is delivered with AC
DIN-Rail switches are mainly delivered w 3 power supply inputs: 12-48Vdc dual terminal block and 12Vdc self-blocking jack.
One AC (110V/220V)
One DC 48V
Two redundant AC (110V/220V)
Two redundant DC 48V
additional number order
CXR Anderson Jacobson – www.cxr.com – Rue de l'Ornette – 28410 Abondant – France
Telephone: +33 (0)2 37 62 87 90 – Fax: +33 (0)2 37 62 88 01 – Mail: [email protected]
-2-
Railway
Industrial and Hardened
Ethernet Switches FE/GE/10GE
CXR offers a large range of Fast-Ethernet/Gigabit-Ethernet industrial and hardened switches for
Intelligent Transportation System (ITS) compliant to Nema TS1/TS2, but also for Railway
environment according to EN50121-4 and for Electrical Power Substation Automation System
according to IEC61850-3. These equipments are used in Building Automation and Factory
Automation. CXR proposes also a range of Carrier Ethernet Switches FE/GE/10GE to build
backbones.
Industrial -10 to +60°C
Hardened -40 to +75°C
EN50121-4 Railway
IEC61850-3
Electrical Power
substation automation
IEC 61000-6-2 ITS Intelligent Transportation System Building Automation – Factory Automation —
DIN-Rail Switches with dual 12-48Vcc
and 12Vcc jack power supply. Inputs
support 6kV electric shocks and 5g at
10-150KHz of 0,35mm vibrations.
SWD-I-5TX / SWD-I-4TX-F...
4 to 5x10/100BaseT, 0 or 1x100FX.
Unmanaged Switches, DIN-Rail
SWD-I-8TX-xF… SWD-H-8TX-xF…
6 to 8x10/100BaseT, 0, 1 or 2x100FX.
SWD-H-8TX-xF...
6 to 8 x10/100BaseT, 0,1 or 2x100FX.
SWD-H-16TX-xF...
SWD-I-5TX
SWD-I-8TX-xF
14 to 16x10/100BaseT, 0,1 or 2x100FX.
SWD-H-8TX-xF
SWD-HE-8TX-xF
SWD-H-16TX-xF
Layer 2 Managed Switches, DIN-Rail & 19’’
SWD-HE-8TX-xF...
EN50121-4 and IEC61850-3
Railway and Power substation Automation
Support 802.1x Authentification , VLAN
802.1q, QoS 802.1p, RSTP, MSTP, Alpha
-Ring <15ms, Truncking, IGMP...
SWMD-I-8TX and -2FSF-2GSF
8x10/100BaseT, 2 up-link 1000BaseT
SFP 100FX and/or SFP 1000FX
SWMD-I-16TX and -2GS..
SWMD-H-16TX and -2FSF,–2GSF
SWMD-I-8TX
SWMD-I-16TX
SWMD-H-16TX
SWMD-HT-8TX
SWMD-HE-16TX
16x10/100BaseT, 2 up-link 1000BaseT
SFP 100FX and/or SFP 1000FX
SWMD-HT-8TX and 2FSF–2GSF
EN50121-4 Railway Station
8x10/100BaseT, 2 up-link 1000BaseT
SFP 100FX and/or SFP 1000FX
SWM-HE-24TX
SWM-HE-24FX
SWM-H-24TX-4CB
SWM-H-24FX-4CB
SWM-HE-M modular
SWMD-I-8TGX
SWMD-I-8TGX,-2G…
8x10/100/1000BaseT, 2 fixed 1000FX
SWM-H-24TX,–4GX or 4 Combo
24x10/100BaseT, 4 up-link 1000BaseT
or Combo 100/1000BaseT SFP 1000FX
SWM-HE-24TX,–4GX or 4 Combo
EN50121-4 and IEC61850-3, Railway and
Power Substation automation
SWM-HE-M
SWMP-HR67
Modular switch 24 FE/FX and 4 GE/GX
SWMP-HR67
IP-67 switch EN50155 Rolling Stock
Layer 2 Managed Hybrid Ethernet/DSL/FO & RS232/485
CopperWAY-BIS
Layer 2 & 3 Managed Carrier Ethernet GE/10GE
SWM-8TX-UCB
SWM-24TX-2UCB
Hybrid Ethernet FE, FX & G.SHDSL.Bis,
switch with encapsulation over TCP/
UDP of RS232/RS485, dry contact ...
CopperWAY-BIS-2/4W-4RS...
4x10/100Baset, 2 SFP 100FX, 2
GSHDSL.bis 2/4 wires, 4 RS232, contact
Support 802.1x, VLAN 802.1q, Q-in-Q,
QoS 802.1p, RSTP, MSTP, ESR-Ring
<50ms, G8032, Truncking, IGMP…
VLAN routing, RIP1&2, OSPF, VRRP...
SWM-8/24TX-2UCB-AC or DC
8 or 24x10/100Baset, 2 universal Combo
SW3l-24/48TX/FS-4GE...
SW3L-24/48TX/FX
Layer 2+, 24 or 48 ports FE/FX, 4 Combo
SW3G-24/48TX/FX
Layer 3, 20 or 48 ports GE/GX, 4 Combo,
4 x 10GE
Smart Solutions for Smart Networks—www.cxr.com
SW3G-20/44TGX-4GE...
DIN-rail Industrial and Hardened
Unmanaged Ethernet switches
SWD-HE-8TX
SWD-HE-6TX-F..
SWD-HE-6TX-2..
SWD-H-16TX
SWD-H-14TX-2F..
SWD-H-15TX-F..
9 FE
8 FE
16 FE
Hardened -40 to 75°C
√
√
√
Industrial
IEC61000-6-2 EMC Generic Standard immunity for Industrial env., CE, FCC, UL608, NEMA TS1 & TS2
MODELS
SWD-I-5TX
SWD-I-4TX-F..
SWD-I-8TX
SWD-I-8TX-F..
SWD-I-6TX-2F..
5 FE
9 FE
√
√
SWD-H-8TX
SWD-H-8TX-F..
Unmanaged
MANAGEMENT
Maximum Number of ports
Environment
Industrial -10 to 60°C
Train station
EN50121-4
Power substation automation
IEC61850-3
Ethernet ports
User ports
5 or 4
10/100BaseT
8 ou 6
10/100BaseT
8
10/100BaseT
8 or 6
10/100BaseT
16, 15 or 14
10/100BaseT
Optical fiber 100FX
0 or 1
0, 1 or 2
0, 1 or 2
0, 1 or 2
0, 1 or 2
Optical
MM or SM10/20
MM or SM10/20
MM or SM10/20
MM or SM10/20
MM or SM10/20
Alarm contact
-
Yes
Yes
Yes
Yes
Format
IP30 aluminium case
DIN-Rail
Fanless
IP30 aluminium case
DIN-Rail
Fanless
IP30 aluminium case
DIN-Rail
Fanless
IP30 aluminium case
DIN-Rail
Fanless
IP30 aluminium case
DIN-Rail
Fanless
Dimensions L x D x H mm
75,5 x 110 x 135
Power supply
12-48Vcc
50 x 125 x 135
2 x 12-30Vcc
jack 12Vcc
50 x 110 x 135
2 x 12-48Vcc
jack 12Vcc
60 x 125 x 145
2 x 12-48Vcc
jack 12Vcc
75,5 x 110 x 135
2 x 12-48Vcc
jack 12Vcc
Uplink 10/100/1000BaseT
Uplink 1000FX
Mechanical/Electrical
Performance
Address table size
2048
2048
2048
2048
4096
Packet Buffer Memory/bits
384K
768K
768K
448K
1,6M
PHYSICAL DESCRIPTION OF INDUSTRIAL DEVICES & COMPLIANCES
INDUSTRIAL
Working temperature is -10 or -20°C to 60°C, during the manufacturing process each product is tested
from -20 to +70°C temperatures during 72 hours. Comply to CE, EMI/EMS EN61000-6-2/4 and FCC Part
15 Class A, Vibration/Chock IEC60068-2-6/32
HARDENED
Working temperature is 40°C to 75°C, during the manufacturing process each product is tested from
-40 to +85°C temperatures during 72 hours. Comply to CE, EMI/EMS EN61000-6-2/4 and FCC Part 15
Class A, Vibration/Chock IEC60068-2-6/32
EN50121-4
EN50155 ,
EN50121-3-2
These equipments comply to the environmental/electrical regulations applicable for railway stations.
IEC61850-3 &
IEEE1613
These equipments comply to the environment/electrical standard for the Electrical Power Substation
Automation.
These equipments comply to the environmental/electrical/vibration regulations applicable for railway
rolling stock. They are using M12 Ethernet connectors.
CXR Anderson Jacobson – www.cxr.com – Rue de l'Ornette – 28410 Abondant – France
Telephone: +33 (0)2 37 62 87 90 – Fax: +33 (0)2 37 62 88 01 – Mail: [email protected]
-4-
DIN-rail Industrial and Hardened
Layer 2 managed Ethernet switches
 Full Ethernet Layer2 stacks
with high level access security
 Alpha ring recovery < 15ms
and dual homing MSTP/RSTP
 Dual power input -12 to - 48Vdc

MODELS
terminal block and
12Vdc jack with latch
IP30 aluminum case with DIN-rail
fixing according to IEC60068
SWMD-I-8TX-2TGX SWMD-HT-8TX-2TGX
SWMD-HE-16TX
SWMD-I-8TGX
SWMD-I-8TX-2GSF SWMD-HT-8TX-2GSF SWMD-I-16TX-T2GX
SWMD-H-16TX
SWMD-HE-16TX-2G.. SWMD-I-6TGX-2G..
SWMD-I-6TXSWMD-HT-6TXSWMD-I-16TX-2G.. SWMD-H-16TX-2G..
SWMD-I-7TGX-G..
2FSF2GSF
2FSF2GSF
Layer 2 managed
MANAGEMENT
Environment
Industrial -10 to 60°C
factory test at 70°C during 72h
Hardened -40 to 75°C
factory test at 85°C during 72h
√
√
√
Industrial
√
√
IEC61000-6-2 EMC Generic Standard immunity for Industrial env., CE, FCC, UL608, NEMA TS1 & TS2
Railwail station
EN50121-4
EN50121-4
Power substation automation
IEC61850-3
Ethernet ports
Maximum throughput
User ports
100FX fiber ports
10/100/1000BaseT uplink
1000FX uplink
8 FE + 2 GE
8 FE + 2 GE
16 FE + 2 GE
16 FE + 2 GE
16 FE + 2 GE
8 GE
8 x 10/100BaseT or
6 x 10/100BaseT &
2 x 100FX SFP
8 x 10/100BaseT or
6 x 10/100BaseT &
2 x 100FX SFP
16
10/100BaseT
16
10/100BaseT
16
10/100BaseT
8, 7 or 6
10/100/1000BaseT
0 or 2
0 or 2
0 or 2
0 or 2
0 or 2
2 x 10/100/1000BaseT or
2 SFP 1000FX
0 or 2 SFP
2 x 10/100/1000BaseT or
2 SFP 1000FX
0 or 2 SFP
0 or 2
0 or 2
SFP FX or GSX/GLX
SFP FX or GSX/GLX
MM or SM10/20
MM or SM10/20
MM or SM10/20
MM or SM10/20
Format
IP30 aluminium case
DIN-Rail
Fanless
IP30 aluminium case
DIN-Rail
Fanless
IP30 aluminium case
DIN-Rail
Fanless
IP30 aluminium case
DIN-Rail
Fanless
IP30 aluminium case
DIN-Rail
Fanless
IP30 aluminium case
DIN-Rail
Fanless
Dimensions L x P x H
60 x 125 x 145
60 x 125 x 145
59 x 125 x 145
65 x 125 x 145
84 x 125 x 145
60 x 125 x 145
Power supply
2 x 12-48Vcc
jack 12Vcc
2 x 12-48Vcc
jack 12Vcc
2 x 12-48Vcc
jack 12Vcc
2 x 12-48Vcc
jack 12Vcc
2 x 12-48Vcc
jack 12Vcc
2 x 12-32Vcc
jack 12Vcc
Mac address table size
4096
8192
8192
8192
8192
4096
Packet Buffer Memory/bits
2M
2M
2M
2M
2M
1M
Optical
Mechanical/Electrical
Performance
Network redundancy & ring
STP/RSTP
Yes
MSTP
Yes
Alpha Ring < 15ms
Yes
Management and network's protocols
VLAN
VLAN per port and tagging 802.1q and GVRP
QoS 802.1p
802.1p with 4 priority queues
IGMP
Multicast with IGMP Snooping V1,V2 and V3
Security of access
802.1x per port with Radius client, and per port up to 24 static Secure MAC adresses
Bandwidth Rate Control
802.3x ingress/egress flow control per port
Other protocols
Truncking LACP, Port Mirroring, NTP client and NTP relay
Ethernet
10/100Mbps Full/Half Duplex, 1000Mbps Full Duplex, Auto-negotiation, MDI/MDIX, tranfert Wire-Speed,
Management
Consol port, Telnet/SSH, SNMP V1/V2/V3, RMON, Web browser, TFTP and CLI, Client and Server DHCP
Smart Solutions for Smart Networks—www.cxr.com
-5-
19’’ 1U Industrial & Hardened
Layer 2 managed Ethernet switches
 Full Ethernet Layer2 stacks
with high level access security
 Alpha ring recovery < 15ms
and dual homing MSTP/RSTP
 Multiple fixed configurations on order up to
24 FE or FX SFP with 4 GE combo
 Compliance with the regulations in :
 Hardened switch, half 19” with bracket
Intelligent traffic
Railway Stations
Electric Power Substation Automatic System
Support –40°C to +75°C tested at 85°
for panel or 19” mounting
12 FE and 2 GSX/GLX SFP uplink

 Dual DC 48V power supplies
MODELS
SWM-H-14TX
SWM-H-12TX-2G..

 Single or double AC or DC 48V power supplies
SWM-H-24TX-4GX
SWM-H-24TX-4CB
SWM-H-24FSF-4GX
SWM-H-24FSF-4CB
SWM-HE-24TX-4GX
SWM-HE-24TX-4CB
SWM-HE-24FSF-4CB
….-16TX-8FSF-4CB
√
√
Layer 2 managed
MANAGEMENT
Environment
Industrial -10 to 60°C
factory test at 70°C during 72h
Hardened -40 to 75°C
factory test at 85°C during 72h
√
Industrial
√
√
IEC61000-6-2 EMC Generic Standard immunity for Industrial env., CE, FCC, UL608, NEMA TS1 & TS2
Railwail station
EN50121-4
Power substation automation
IEC61850-3
Ethernet ports
Maximum throughput
12 FE + 2 GE
24 FE + 4 GE
24 FX + 4 GE
24 FE + 4 GE
24 FX + 4 GE
User ports
14 or 12
10/100BaseT
24
10/100BaseT
24 or 16
100FX SFP
24
10/100BaseT
24
100FX SFP
100FX fiber ports
10/100/1000BaseT uplink
0 or 2
4 or
4 or
4 Combo
1000FX uplink
0 ou 2 SFP
4 Combo
4 Combo
4 Combo
10/100/1000BaseT
Optical
SFP 1000SX/LX/ZX
SFP 1000SX/LX/ZX
SFP 1000SX/LX/ZX
SFP 1000SX/LX/ZX
SFP 1000SX/LX/ZX
Mechanical/Electrical
Format
IP30 metal case
Optional Rail-DIN or 19" 1,25 U,
Fanless
IP30 metal case
19" 1U
Fanless
IP30 metal case
19" 1U
Fanless
Dimensions L x P x H
235 x 125 x 50
442 x 250 x 44 single power
442 x 375 x 44 dual power
442 x 284 x 44 single power
442 x 375 x 44 dual power
Power supply
2 x 12-48Vcc
jack 12Vcc
AC, 2 AC,
DC48v ou 2DC48v
AC, 2 AC,
DC48v ou 2DC48v
Mac address table size
8192
8192
8192
Packet Buffer Memory/bits
3M
3M
3M
STP/RSTP
Yes
Yes
Yes
MSTP
Yes
Yes
Yes
Alpha Ring < 15ms
Yes
Yes
Yes
Performance
Network redundancy & ring
Management and network's protocols
VLAN
VLAN per port and tagged 802.1q, GVRP
QoS 802.1p
802.1p with 4 priority queues
IGMP
Multicast w IGMP Snooping V1,V2 et V3
Security of access
802.1x per port with Radius client, and per port up to 24 static Secure MAC addresses
Bandwidth Rate Control
802.3x administration for ingress/egress flow per port
Other protocols
Truncking/MAC address, Port Mirroring, NTP client and relay
Ethernet
10/100Mbps Full/Half Duplex, 1000Mbps Full Duplex, Auto-negotiation, MDI/MDIX, tranfert Wire-Speed,
Management
Console port, Telnet/SSH, SNMP V1/V2/V3, RMON, Web browser, TFTP and CLI, Client and Server DHCP
CXR Anderson Jacobson – www.cxr.com – Rue de l'Ornette – 28410 Abondant – France
Telephone: +33 (0)2 37 62 87 90 – Fax: +33 (0)2 37 62 88 01 – Mail: [email protected]
-6-
Modular 19’’ 1U Hardened & Industrial
Layer 2 managed Ethernet switches
 Fully modular range of switches supporting up to
SWM-IE-M
plus modules
MODELS
SWM-HE-M
plus modules
24 FE/FX and 4 Combo
 Full Ethernet Layer2 stacks with high level access
security
 VLAN, QoS with 4 queues, IGMP snooping...
 Alpha ring recovery < 15ms and dual homing
Layer 2 manageable
MANAGEMENT
Environment
Industrial -10 to 60°C
factory test at 70°C during 72h
Hardened -40 to 75°C
factory test at 85°C during 72h
MSTP/RSTP
√
√
Industrial
IEC61000-6-2 EMC Generic Standard immunity for Industrial env.,
CE, FCC, UL608, NEMA TS1 & TS2
Railwail station
EN50121-4
Power substation automation
IEC61850-3
 ITS ‘’Intelligent traffic system’’
according to EN61000
 Railway-Tramway-Underground Stations
according to EN50121-4
Ethernet ports
 Automatic system in electrical substations
Maximum throughput
24 FE/FX + 4 GE
User ports
10/100BaseT or 100FX
3 slots w ith a choice of 3 m odules:
8 x 10/100BaseT
6 x 100FX fixed MM or SM
6 FE + 2 FX fixed M or SM
Uplink ports
4 GE or 4 GSX/GLX
1 slot w ith a choice of 2 m odules:
4 x 10/100/1000BaseT
4 Com bo 100/1000Baset and GSX/GLX SFP
Mechanical/Electrical
IP30 metal case
19" 1U
Fanless
IP30 metal case
19" 1U
Fanless
Dimensions L x P x H
442 x 343 x 44 mm
442 x 343 x 44 single power
442 x 375 x 44 dual power
Power supply
AC or DC48v
AC, 2 AC,
DC48v or 2DC48v
Mac address table size
8192
8192
Packet Buffer Memory/bits
3M
3M
STP/RSTP
Yes
Yes
MSTP
Yes
Yes
Alpha Ring < 15ms
Yes
Yes
Format
Compliance with regulations for:
Performance
Network redundancy & ring
according to IEC61850/IEEE1613
 Support –40°C to +75°C
and tested during the manufacturing process at
85°C
 Uplink module (1 slot):
 4 x 10/100/1000BaseT ports
 4 ports Combo 10/100/1000BaseT and
1000FX SFP
 Tributaries modules :
 8 ports 10/100BaseT
 6 ports 100FX fibre fixe
 6 ports 100FX fibre fixe et 2 10/100BaseT
 Single or dual AC or DC 48V power supplies
 SWM-IE-M version supports –20 to +60°C
 SWM-HE-M version supports –40 to +75°C
Management and network's protocols
VLAN
VLAN per port and tagged 802.1q, GVRP
QoS 802.1p
802.1p with 4 priority queues
IGMP
Multicast w IGMP Snooping V1,V2 et V3
Security of access 802.1x per port with Radius client, and per port up to 24 static Secure MAC addresses
Bandwidth Rate Control
802.3x administration for ingress/egress flow per port
Other protocols
Truncking/MAC address, Port Mirroring, NTP client and relay
10/100Mbps Full/Half Duplex, 1000Mbps Full Duplex, Auto-negotiation, MDI/MDIX, tranfert Wire-Speed,
Ethernet
Console port, Telnet/SSH, SNMP V1/V2/V3, RMON, Web browser,
Management
TFTP and CLI, Client and Server DHCP
Smart Solutions for Smart Networks—www.cxr.com
-7-
Layer 2 Ethernet switches for Railway Rolling
stock Material EN50155 and IP67
CXR supplies Ethernet copper extenders and Ethernet switches design to be mounted inside the rolling stock material:
railway, tramway or underground. These equipments are compliant with the EN50155 and EN50121-4 and support high
level of EMC and vibration constraints. Extenders use twisted pair or coax in VDSL or MSDSL to connect switches and carry
voice, video, data and power-feed Wifi AP.
MODELS
SWMP-HR-8TPM-2GM
SWMP-H67-8TM8TPM-2GM
Layer 2 managed
MANAGEMENT
Environment
Hardened -40 to 75°C
factory test at 85°C during 72h
Industrial
Railwail station
√
√
IEC61000-6-2 EMC Generi c Sta nda rd i mmuni ty for Indus tri a l env.,
CE, FCC, UL608, NEMA TS1 & TS2
EN50155
EN50155
EN50121-3-2
EN50121-3-2
Ethernet ports
Maximum throughput
8 FE + 2 GE
16 FE + 2 GE
User ports
8 x 10/100BaseT
with M12 connector
16 x 10/100BaseT
with M12 connector
10/100BaseT POE PsE 802.3at
8 ports at 30W
10/100/1000BaseT uplink
2 x 10/100/1000BaseT or
2 x 1000GSX or GLX in LC,
w M12 connector
1000FX uplink
Alarm contact
8 POE 802.3at 30W ports
& 8 ports non poe
2 x 10/100/1000BaseT or
2 x 1000GSX or GLX in LC,
w M12 connector
Yes - setup for power and port link failure
Mechanical/Electrical
Format
IP50 metal case,
panel mounting, Fanless
IP67 metal case,
panel mounting, Fanless
Dimensions L x P x H mm
288 x 161,5 x 64
258 x 83,5 x 228
Power supply
2 x 24-48Vcc
with M23 connector
2 x 12-48Vcc ou 2 x AC,
with M23 connector
8192
2M
8192
2M
The SWMP-HR-8TPM-2GM switch have been developed to
be used inside the rolling stock railway or subway. It concentrate Ethernet flow and provide POE to power the camera, the Wifi hot-spots and all Ethernet probes. It comply to
the EN50155 and the EN50121-3-2 environmental requirements. FE/GE copper and GSX/GLX LC fiber ports are provided with M12 waterproof connectors and power supply
are connected over M23, both with high level of security
against vibrations.
Performance
Mac address table size
Packet Buffer Memory/bits
Network redundancy & ring
STP/RSTP/MSTP
Yes
Alpha Ring < 15ms
Yes
Management and network's protocols
VLAN
VLAN per port and tagging 802.1q and GVRP
QoS 802.1p
802.1p with 4 priority queues
IGMP
Multicast with IGMP Snooping V1,V2 and V3
Security of access
802.1x per port with Radius client, per port 24 static Secure MAC adresses
Bandwidth Rate Control
802.3x ingress/egress flow control per port
Other protocols
Truncking LACP, Port Mirroring, NTP client and NTP relay
Ethernet
10/100Mbps Full/Half Duplex, 1000Mbps Full Duplex,
Auto-negotiation, MDI/MDIX, Wire-Speed tranfer,
Management
Console port, Telnet/SSH, SNMP V1/V2/V3, RMON, Web, TFTP and CLI
Transmission and power supply of IP cameras and Wifi
Access Points are provided by SWMP-HR67-8TM8TPM2GM. The switches are interconnected over coax cable
with Ethernet over VDSL COAX-HR-TM up to 85Mbps.
CXR Anderson Jacobson – www.cxr.com – Rue de l'Ornette – 28410 Abondant – France
Telephone: +33 (0)2 37 62 87 90 – Fax: +33 (0)2 37 62 88 01 – Mail: [email protected]
-8-
The SWMP-HR67-8TM8TPM-2GM is an IP67 graded hardened switch used in railway or subway rolling stock and
powered in AC or DC. His strong waterproof case with M12
and M23 connectors protects the Ethernet switch from
humidity, the dust and maintains cables against vibrations
in hostile environment of traction machines and wagons.
The POE version powerfeeds up to 8 Ethernet devices like
AP, VoIP phones, Ethernet PLC… This switch complies to
the EN50155 and the EN50121-3-2 environmental requirements to be used in rolling stock material.
Ethernet switch for Rolling coach & Bus,
E-Mark approval
SWD-I-4TPS-4TX
SWD-I-4TPS-3TX-F
MODELS
SWD-H-4TPS-4TX
SWD-H-4TPS-3TX-F
AUTOMATIC
MANAGEMENT
Environnemental
8 FE
8 FE
Port capacity
Industrial -10 at 60°C
Factory test -20 at 70°C
Hardened -40 at 75°C
Factory test -40 at 85°C
Industrial compliance
IEC61000-6-2 Industrial generic, CE, FCC, UL608, NEMA TS1 & TS2
Inside Coach and Bus
Qualification E-MARK 10
√
√
Ethernet ports
10/100BaseT POE PsE 802.3af
4 or 3
4 or 3
10/100BaseT POE PsE 802.3af
4 ports at 15,4W
4 ports at 15,4W
Optical ports 100FX
0 or 1 fixed SC or ST
0 or 1 fixed SC or ST
SWD-I-4TPS-4TX and SWD-H-4TPS-4TX .
Yes set up per port or power supply
Alarm relay
Physical / Electrical
Casing
IP30 aluminium, Rail-DIN, Fanless
Dimensions W x D x H mm
62 x 110 x 135
60 x 125 x 145
Power supply, 2 redundant
2 x 48Vcc, jack 48Vcc
2 x 48Vcc, jack 48Vcc
Consumption w:o POE / w POE
10 W / 72 W
10 W / 72 W
MAC address table size
1024
1024
Packet buffer memory (Bits)
1M
1M
IP30 aluminium, Rail-DIN, Fanless
Theses POE switches and 12 to 48V converters have
got the E-Mark approval and can be installed in Buses
or Coaches and in order to support IP cameras and
ticketing machines.
They provide POE power over Ethernet ports to power
feed Ethernet equipments.
Performances
SWEDD-xxxx-C Hybrid Layer 2 switches
with SyncE and PTP IEEE1588v2
MODELS
SWEDD-4TGX4GSF
SWEDD-4TGX4GSF-C
SWEDD-xxxx-H
Layer 2 managed
MANAGEMENT
Environnemental
√
Standard -5 to 50°C
√
√
Hardened -20 to 70°C
Industrial
CE, FCC
Power substation automation
IEC61850-3, IEEE1613
Maximum throughput
8 GE
8 GE
8 GE
WAN ports
2 SFP 1000SX/LX
2 SFP 1000SX/LX
2 SFP 1000SX/LX
10/100/1000Baset LAN ports
4
4
4
10/100/1000Baset POE PSE ports
Option 2 port POE
Option 2 port POE
Option 2 port POE
1000SX/LX LAN port
2 SFP 1000SX/LX
2 SFP 1000SX/LX
2 SFP 1000SX/LX
Asynchronous ports
Option 4 RS232/RS485
Option 4 RS232/RS485
Option 4 RS232/RS485
Input/Output dry contacts
Option 2 In 2 Out
Option 2 In 2 Out
Option 2 In 2 Out
Mechanical/Electrical
IP30 metal case, DIN-rail, Fanless
Dimensions L x P x H
67,2 x 167 x 219
Power supply
Dual power DC 18-36Vdc or 36-72Vdc plus POE power -44 to -57Vdc
Performance
MAC address table
8192
Switching capacity
10 Gbps
Network redundancy & ring
STP protocols
STP/RSTP/MSTP
Ring protection
LEAPS and IUT G.8032
Management and network's protocols
VLAN
This Hybrid Gigabit Ethernet switch
is carrying pure Ethernet flows,
encapsulated RS232/RS485 and Dry
Contacts over Gigabit network.
This Gigabit Ethernet switch is supplied in option with 2 GE SFP WAN,
6 GE LAN and 2 Combo LAN.
WAN, LAN Ethernet ports and encapsulated ports
Format
SWEDD-4TGX4GSX-C
VLAN per port and 802.1q tagging
QoS 802.1p
802.1p with 4 queues of priority
Security of access
802.1x per port w Radius client, 16 secure MAC addresses
Bandwidth Rate Control
802.3x ingress/egress flow limitation per port
Ethernet
10/100Mbps auto-rate, auto Full/Half Duplex, MDI/MDIX, Wire-Speed tranfert
RS232 encapsulation
Raw-TCP
Synchronization
SyncE WAN ports and PTP Slave IEEE 1588 v2
Management
Over LAN and WAN in SSHv2,Web browser HTTP/HTTPS, SNMP v1/2/3, FTP
Thanks to the OAM support it is a
real Ethernet Demarcation Device.
Support of SyncE network and PTP
1588 slave functions provides frequency and Phase synchronization
on tributaries to synchronize IP
radio-truncking BTS or PLC.
An hardened version is also available.
This device is used for
- Intelligent Traffic System,
- High level of automatism system,
- Telcos for IP BTS
- ...
Smart Solutions for Smart Networks—www.cxr.com
-9-
Hybrid Ethernet/FO/G.Shdsl w RS232/485
Layer 2 managed switches
MODELS
CopperLAN-BisMCx
CopperWAY-Bis2TTX
CopperWAYBis-2W
-MC
CopperWAYBis-2W
-4RS-MC
CopperWAYBis-4W
-MC
CopperWAYBis-4W
-4RS-MC
CopperWAY-BisSFP-HV
Layer 2 managed
MANAGEMENT
Environnemental
Industrial -10 to 60°C
√
-
-
-
-
-
-
Industrial -20 to 65°C
-
√
√
√
√
√
√
CE, FCC
Industrial
WAN, LAN Ethernet ports and encapsulated ports
Maximum throughput
4 FE + 1 FE/DSL
2 FE + 2 FE/DSL
6 FE + 2 FE/DSL
6 FE + 2 FE/DSL
1GE+ 2 FE + 2 FE/DSL
User ports
4
2
4
4
4
10/100Baset POE PSE ports
include 1 POE PsE 802.af
-
include 1 POE PsE 802.af
include 1 POE PsE 802.af
Fiber ports
-
-
2 x 100FX SFP
2 x 100FX SFP
1 x 1000GSX/GLX SFP
Ethernet/EFM/G.SHDSL .Bis
1 port w 2/4 wires
2 ports w 2 wires
2 ports w 2 wires
2 ports w 2/4 wires
2 ports w 2/4 wires
DSL line isolation
-
-
-
-
10KV
Coding
TC-PAM
TC-PAM16/32/64/128
TC-PAM16/32/64
TC-PAM16/32/64
TC-PAM16/32/64/128
Maximum rate per direction
11,4 Mbps
15 Mbps
11,4Mbps
22 Mbps
11,4 Mbps
Asynchronous ports
1 RS232
1 RS232
-
Input/Output dry contacts
-
-
-
Format
IP30 metal case
DIN-rail, Fanless
IP30 metal case
DIN-rail, Fanless
Dimensions L x P x H
41 x 120 x 170
Power supply
MC2= 9-36Vcc
MC1- 36-72V
1 RS232/RS485
+ 3 RS232
2 In 2 Out
1 RS232/RS485
+ 3 RS232
2 In 2 Out
-
1 RS232
2 In 2 Out
Mechanical/Electrical
IP30 metal case
DIN-rail, controled fan
44x 144 x 154
IP30 metal case
DIN-rail, controled fan
45 x 140 x 155
IP30 metal case
DIN-rail, Fanless
44x 144 x 154
9-36Vcc
2 x 9-55Vcc
2 x 9-55Vcc
9-36Vcc
70x 150 x 280
Performance
MAC address table
1024
1024
8192
8192
8192
Frame buffer/bits
512K
512K
1M
1M
1M
Network redundancy & ring
STP/RSTP
STP
STP/RSTP
VLAN
VLAN per port and
802.1q tagging, Q-in-Q
VLAN per port and 802.1q tagging
QoS 802.1p
w 2 priority queues
Management and network's protocols
802.1p with 4 queues of priority
802.1x per port w Radius client, 16 secure MAC addresses
Security of access
Bandwidth Rate Control
802.3x ingress/egress flow limitation per port
Ethernet
10/100Mbps auto-rate, auto Full/Half Duplex, MDI/MDIX, Wire-Speed tranfert
RS232 encapsulation
Raw-TCP/UDP
Console port
RS232
Management
Raw-TCP, HNZ, Bloc Message, COM port according to RFC2217 compatible w Tactical's Serial IP
RS232
USB
Over console port LAN and WAN in SSH, SNMP V2, Web browser HTTP/HTTPS, FTP
CXR Anderson Jacobson – www.cxr.com – Rue de l'Ornette – 28410 Abondant – France
Telephone: +33 (0)2 37 62 87 90 – Fax: +33 (0)2 37 62 88 01 – Mail: [email protected]
-10-
USB
CopperWAY-Bis Hybrid Ethernet/FO/G.Shdsl
Layer 2 switches with RS232/485 and contact
The CXR CopperWay-Series is a range of Hybrid Ethernet switches. They are mainly used in
Transportation for road infrastructure, traffic light, CCTV and for Utilities Smart Grid or
production application. These switches are Hybrid because they are interconnected with fibers
and with DSL over coppers, but also because they support not only Ethernet or Ethernet POE but
also asynchronous links RS232/RS485 and Dry Contacts encapsulated over IP.
The new CopperWAY-Bis-HV range with its 10KV isolation is over suited for the Electricity
distribution to run in 20KV electrical sub-stations and carry especially SCADA, information from
and to electricity meters.
1 or 4 optional
RS232/RS485
6 input, 2 output
optional dry contacts
CopperWAY-Bis
Hybrid interconnection/transport
over Ethernet copper 100Baset, Ethernet fiber
100FX and GSHDSL.bis EFM at 5.6Mbps to 22Mbps
over 2 or 4 wires up to 10km.
Hybrid tributaries
4 Ethernet ports with one Ethernet POE PSE,
4 asynchronous RS232/RS485 ports
6 Dry Contact Inputs and 2 Outputs.
Supports Bus and Ring RSTP structure.
A complete Layer2 switch, with VLAN, QoS…
4 LAN
10/100BaseT
2 WAN G.SHDSL-Bis
2/4 wire up to 22Mbps
2 WAN SFP
100FX
CopperWAY-Bis-2TTX
Bottom of the range product
with 2 GSHDSL.bis EFM up to 15Mbps over 2 wires up to 10km.
Two Ethernet ports and one asynchronous RS232 port
Supports Bus and Ring RSTP structure.Layer2 switch, with VLAN, QoS…
AMS16 and SpeederLAN card
The chassis supporting DSL, fiberoptic, TDM (E1,E3, X21, V35..)
SpeederLAN cards support Ethernet over 1, 2, 4 and 8 pairs bounding
This solution can concentrate up to 16 SpeederLAN-Bis-2x2 cards up to
64 distant CopperWAY-Bis.…
The HV range,
isolated DSL at 10KV
CopperWAY-Bis-SFP-HV
Ethernet switch GSHDSL.bis modem for 20KV electric substation
with 2 GSHDSL.bis EFM up to 11Mbps with 2 wires isolated at 10kV.
1 Gigabit Ethernet SFP and 4 Ethernet ports and 1 RS232 ports
Supports Bus and Ring RSTP topology. Layer2 switch, with VLAN, QoS…
MV16HV
This chassis provides the isolation for 16 pairs at 10kV
this chassis Is used in DSL concentration sites for power companies to isolate the GSHDSL or GSHDSL.bis lines before the connection to the SpeederLAN cards fitted in AMS16 chassis.
Smart Solutions for Smart Networks—www.cxr.com
-11-
Industrial and carrier Ethernet
Layer 2 managed switches - FTTb
MODELS
SWM-8TX-UCB
SWM-24TX-2UCB
Layer 2 managed
SWM-24TGX-4GSF
√
√
√
MANAGEMENT
Environment
Industrial -10 to 60°C
IEC61000-6-2 EMC Generic Standard immunity for Industrial env., CE
Industrial
Ethernet ports
8 FE + 1 GE
8
10/100BaseT
1 Universal Combo
10/100/1000BaseT +
SFP 100FX/1000SX/LX
Maximum throughput
User ports
Uplink FE/GE/FX/GX
24 FE + 2 GE
24
10/100BaseT
2 Universal Combo
10/100/1000BaseT +
SFP 100FX/1000SX/LX
24 FE + 2 GE
24
10/100/1000BaseT
4 SFP 1000SX/LX/ZX
by SFP
Mechanical/Electrical
Format
19'' 1U w brackets
19'' 1U w brackets
19'' 1U w brackets
Dimensions L x P x H
205 x 130 x 40 mm
440 x 192 x 44 mm
440 x 290 x 44 mm
Power supply
AC or DC 36-72v
AC or DC 36-72v
AC or DC 36-72v
Performance
Mac address table size
8K
8K
16K
Packet Buffer Memory/bits
3,6 Gbps
8,8 Gbps
56 Gbps
Network redundancy & ring
STP/RSTP
Yes
MSTP
Yes
Protection Ring < 50ms
Yes
Yes G8032
Port Mirroring
1:1 and 1:n
Management and network's protocols
VLAN
QoS 802.1p
IGMP
Security of access
VLAN per port and tagged 802.1q , S-VLAN/C-VLAN Q-in-Q and GVRP
Per port, tag 802.1p, IPV4 ToS/DiffServ, IPV6 Traffic Class, 4 priority queues
idem with 8 queues
Multicast w IGMP Snooping V1,V2 and V3, IGMP Proxy, IGMP fast leave, Inter-VLAN multicast dupplication
802.1x per port w Radius client, ACL … please see datasheet
Bandwidth Rate Control
802.3x for ingress/egress flow per port
Other protocols
DHCP server/relay and option 82, LACP truncking, NTP client and relay…
Static routing
IP routing
Ethernet
10/100Mbps Full/Half Duplex, 1000Mbps Full Duplex, Auto-negociation, MDI/MDIX
Management
Over console port or LAN or WAN with Telnet/SSH, SNMP V1/V2/V3, RMON, Web browser, TFTP et CLI
CXR Anderson Jacobson – www.cxr.com – Rue de l'Ornette – 28410 Abondant – France
Telephone: +33 (0)2 37 62 87 90 – Fax: +33 (0)2 37 62 88 01 – Mail: [email protected]
-12-
Layer 2 and 3 managed Switches/Routers
Carrier Ethernet - GE/10GE MEF 9 &14
MODELS
SW3L-24TX-2GSF-2UCB
or
SW3L-24FSF-2GSF-2UCB
SW3L-48TX-2GSF-2UCB
or
SW3L-48FSF-2GSF-2UCB
SW3G-20TGX-4UCB
or
SW3G-20USF-4UCB
Layer 3 manageable
Management and network's protocols
SW3G-24TGX-4UCB
or
SW3G-44TGX-4UCB
Layer 3 manageable
Environmental
Working temperature
-10 à 55°C
Industrial
√
√
√
√
IEC61000-6-2 , CE
Ethernet ports
Maximum throughput
User ports
Uplink FE/GE/FX/GX
24 FE + 4 GE
48FE + 4 GE
24 GE + 4 10GE
48 GE + 4 10GE
24 x 10/100BaseT
or
24 x 100FX SFP
2 Universal Combos
10/100/1000BaseT + SFP
100FX/1000SX/LX
and 2 SFP 1000SX/LX
48 x 10/100BaseT
or
48 x 100FX SFP
20 x 10/100/1000BaseT
or 20 SFP
100FX/1000SX/LX/ZX
44 x 10/100/1000BaseT
or 44 SFP
100FX/1000SX/LX/ZX
Uplink 10 GE
4 SFP 100FX/1000SX/LX
-
-
19'' 1U
19'' 1U
AC or DC 36-72v
AC or DC 36-72v
Mechanical/Electrical
Format
4 Universal Combos
10/100/1000BaseT and SFP 100FX/1000SX/LX
Maximum 4 x 10GE: 2 optional modules of 2 10G
UP-S36-2XFP module with 2 XSFP slots
19'' 1U
19'' 1U
Dimensions L x P x H
Power supply
2 modules AC or DC 36-72v
Performance
Mac address table size
8172
8172
32688
32688
Switching/ backplane
12,8Gbps/32Gbps
17,6Gbps/32Gbps
96Gbps / 128Gbps
128Gbps / 176Gbps
Network redundancy & ring
STP/RSTP/MSTP
Yes
Yes
Ring Protection < 50ms
Yes: ESR ring, R-link
Yes: ESR ring, R-link
G.8031/G.8032
-
Yes
VRRP
Yes
Yes
Static routing and VLAN routing, RIP 1&2, OSPF v2, BGP v4
Static routing and VLAN routing, RIP 1&2, OSPF v2, BGP v4
Management and network's protocols
Routing
VLAN
VLAN per port and tagging 802.1q , S-VLAN/C-VLAN Q-in-Q and GVRP
QoS 802.1p
Port and tag 802.1p, IPV4 ToS/DiffServ, IPV6 Traffic Class, 8 priority queues
IGMP
Multicast avec IGMP Snooping V1,V2 and V3, Inter-VLAN multicast dupplication
Security of access
802.1x per port with Radius Client, ACL … see datasheet
Bandwidth Rate Control
802.3x administration for ingress/egress flow per port
Other protocols
DHCP server/relay and option 82, LACP truncking, NTP client and relay…
Ethernet
10/100Mbps Full/Half Duplex, 1000Mbps Full Duplex, Auto-negociation, MDI/MDIX
Management
Over console port or LAN or WAN with Telnet/SSH, SNMP V1/V2/V3, RMON, Web browser, TFTP et CLI
MEF and cross-administration
MEF 9, MEF 14, OAM Ethernet , 802.3ah, Y.1731, IEEE802.1ag
Smart Solutions for Smart Networks—www.cxr.com
-13-
Layer 2 to 4 Terabit Routing Switches
High density GE/10GE - MPLS
SW3R-03
SW3R-06
SW3R-12
Main control card slots
2
2
2
MODELS
Modular system
Services card slots
3
8
12
Power supply slots
3
6
6
Fan slots
1
3
4
Capacity
Backplane capacity
2 Tbps
6 Tbps
6Tbps
Switching capacity
1,92 Tbps
1,25/2,56 Tbps
1,92/3,84 Tbps
Maximum throughput
1 440 Mbps
960 /1 920 Mbps
1 440 / 2 880 Mbps
Maxi nb of 10GE ports
96 x 10GE
128 x 10GE
192 x 10GE
Maxi nb of GE ports
144 GE
384 GE
576 GE
Card with 4 optical 10GE ports with SFP+
Service 10 GE card
Service GSX/GLX/GZX card
Card with 48 optical GE ports with SFP
Service Copper card
Card with 48 10/100/1000BaseT ports RJ45
Mechanical/Electrical
Format
19'' 5U
19'' 13U
19'' 16U
Dimensions L x P x H
440 x 478,3 x 220
440 x 460 x 574
440 x 460 x 710
Power supply
AC or DC -48 to -60v
AC or DC -48 to -60v
AC or DC -48 to -60v
Network redundancy & ring
STP
STP/RSTP/MSTP
BPDU, protection, root protection, loop protection, BDPU tunnel
Ring protection
G.8032 with 50ms recovery
VRRP
VRRP and BFD for VRRP
Management and network's protocols
IP Routing
IPv4 and IPv6 Static routing.
IPv4 routing: RIP 1&2, OSPF v2, BGB v4 and IS-IS. IPv6 routing: RIPng, OSPF v3, BGP v4+, ISIS v6
MPLS
Static LSP, static VLAN to MPLS mapping. L2VPN, L3VPN. MPLS OAM
VLAN
Access, Trunk and Hybrid VLAN. VLAN per port and tagging 802.1q , S-VLAN/C-VLAN Q-in-Q
QoS 802.1p
Port and tag 802.1p, IPV4 ToS/DiffServ, IPV6 Traffic Class on layer2/3/4, 8 priority queues
Multicast
Security of access
Bandwidth Rate Control
Other protocols
IGMP and IGMP Snooping V1,V2 and V3, Inter-VLAN multicast dupplication.
PIM-DM, PIM-SM, PIM-SSM. Multicast ACL, Multicast VPN
802.1x per port with Radius/TACACS client, ACL … see datasheet
802.3x administration for ingress/egress flow per port
DHCP server/relay and option 82, LACP truncking, NTP client and relay…
Ethernet
10/100Mbps Full/Half Duplex, 1000Mbps Full Duplex, Auto-negociation, MDI/MDIX
Administration
Over consol port/LAN/WAN with Telnet/SSH, SNMP V1/V2/V3, RMON,TFTP et CLI
OAM
OAM Ethernet , 802.3ah, Y.1731, IEEE802.1ag
CXR Anderson Jacobson – www.cxr.com – Rue de l'Ornette – 28410 Abondant – France
Telephone: +33 (0)2 37 62 87 90 – Fax: +33 (0)2 37 62 88 01 – Mail: [email protected]
-14-
SFP /SFP+ / XSF
100FX, 1000GX, 10GE, WDM, CWDM & DWDM
100FX, STM1-OC3 SFP MODULE, support E1/E3 of CXR FO and MX devices, Standard range -5 to +70°C
SFP-STM1-MM-850
SFP module 100FX, STM1 - OC3 multimode 850nm, compatible w ith FO-xxxxx-MM, LC
SFP-STM1-MM2
SFP module 100FX, STM1 - OC3 multimode 1310 for 2km, LC
WDM SFPs are use in pairs:
SFP-STM1-SM30
SFP module 100FX, STM1 - OC3 single mode 1310 for 30km, LC, w ith DDM
SFP-STM1-SM60
SFP module 100FX, STM1 - OC3 single mode 1310 for 50km, LC
SFP-STM1-SM100-15
SFP module 100FX, STM1 - OC3 single mode 1550 for 100km, LC, w ith DDM
SFP-STM1-SM120-15
SFP module 100FX, STM1 - OC3 single mode 1550 for 120km, LC, w ith DDM
SFP-STM1-SM160-15D
SFP module 100FX, STM1 - OC3 single mode 1550 for 160km, LC, w ith DDM, L-4.2
SFP-STM1-SM200-15D
SFP module 100FX, STM1 - OC3 single mode 1550nm w 46 to 50dB budget for 200km, LC, w ith DDM, L-4.2
SFP-STM1-SM15-W13
SFP module 100FX, STM1 - OC3 single mode CWDM 1310 for 15km, LC Bidi, w ith DDM
- first side should be a version
W3 transmitting at 1310nm
- second side should be a version W5 transmitting at 1550nm
They use a single core fiber and
then the LC connector is simplex or named LC Bidi.
SFP-STM1-SM15-W15
SFP module 100FX, STM1 - OC3 single mode CWDM 1550 for 15km, LC Bidi, w ith DDM
SFP-STM1-SM60-W13
SFP module 100FX, STM1 - OC3 single mode CWDM 1310 for 60km, LC Bidi, w ith DDM
SFP-STM1-SM60-W15
SFP module 100FX, STM1 - OC3 single mode CWDM 1550 for 60km, LC Bidi, w ith DDM
100FX, STM1-OC3 SFP MODULE, support E1/E3 of CXR FO and MX devices, Extended Tem perature -40°C to +85°C
SFP-STM1-MM-H
SFP module 100FX w DD, multimode 1310nm portée 2 km, connector LC, -40°C-85°C
SFP-STM1-SM30-H
SFP module 100FX w DD, single-mode 1310nm, budget for 30km , connector LC, -40°C-85°C
SFP-STM1-SM15-W13H
SFP module 100FX, STM1 - OC3 single mode CWDM 1310 for 15km, LC Bidi, w ith DDM
SFP-STM1-SM15-W15H
SFP module 100FX, STM1 - OC3 single mode CWDM 1550 for 15km, LC Bidi, w ith DDM
SFP-GSX-MM
SFP module 1000SX/100FX w DD, multimode 850nm, budget 8,0dB for 550m, connector LC
SFP-GSX-MM-1310
SFP module 1000SX/100FX w DD, multimode 1310nm, budget 16,0dB for 2km, connector LC
SFP-GLX-SM20
SFP module 1000LX/100FX w DD, single-mode 1310nm, budget 17,0dB for 20km , connector LC
SFP-GZX-SM50
SFP module 1000ZX/100FX w DD, single-mode 1550nm, budget 19,0dB for 50km , connector LC
SFP-GZX-SM80
SFP module 1000ZX/100FX w DD single-mode 1550nm, budget 24,0dB for 80km , connector LC
SFP-GZX-SM120
SFP module 1000ZX/100FX w DD single-mode 1550nm, budget 24,0dB for 80km , connector LC
SFP-GLX-SM20W13
SFP module 1000LX/100FX w DD, single-mode 1310nm WDM single fiber, budget 12,0dB for 20km , LC Bidi.
SFP-GLX-SM20W15
SFP module 1000LX/100FX w DD, single-mode 1550nm WDM single fiber, budget 12,0dB for 20km , LC Bidi.
SFP-GZX-SM60W13
SFP module 1000LX/100FX w DD, single-mode 1310nm WDM single fiber, budget 24,0dB for 60km , LC Bidi.
SFP-GZX-SM60W15
SFP module 1000LX/100FX w DD, single-mode 1550nm WDM single fiber, budget 24,0dB for 60km , LC Bidi.
SFP-GZX-SM80W1490
SFP module 1000LX/100FX w DD, single-mode 1490nm WDM single fiber, budget 24,0dB for 80km , LC Bidi.
1000SX/LX/ZX and 100FX SFP MODULE, Standard range -5 to +70°C
SFP-GZX-SM80W1570
The CWDM SFP are available in
18 colors, to be specified on
ordering
The DWDM SFP are available in
the C-Band colors to ITU channel, to be specify on ordering
SFP module 1000LX/100FX w DD, single-mode 1570nm WDM single fiber, budget 24,0dB for 80km , LC Bidi.
1000SX/LX/ZX and 100FX SFP CWDM / DWDM MODULE, Standard range -5 to +70°C
SFP-GLX-SM80-Cxx
SFP module 1000LX/100FX w DD, CWDM lambda au choix de 1430 to 1610nm, budget 24,0dB for 80km, LC
SFP-GLX-SM120-Cxx
SFP module 1000LX/100FX w DD, CWDM lambda, choice from 1430 to 1610nm, budget 32dB for 120km, LC
SFP-GLX-SM150-Cxx
SFP module 1000LX/100FX w DD, CWDM lambda, choice from 1430 to 1610nm, budget 37dB for 150km, LC
SFP-GLX-SM80-Dxx
SFP module 1000LX/100FX w DD, DWDM lambda au choix de 1430 to 1610nm, budget 24,0dB for 80km, LC
SFP-GLX-SM120-Dxx
SFP module 1000LX/100FX w DD, DWDM lambda, choice from 1430 to 1610nm, budget 32dB for 120km, LC
1000SX/LX/ZX and 100FX SFP MODULE, Extended Tem perature -40°C to +85°C
SFP-GSX-MM-H
SFP module 1000SX/100FX w DD, multimode 850nm, budget 8,0dB for 550m, LC, w orking temp. -40°C to +85°C
SFP-GSX-MM-1310H
SFP module 1000SX/100FX w DD, multimode 1310nm, budget 16,0dB for 2km, LC, w orking temp.-40°C to +85°C
SFP-GLX-SM10-H
SFP module 1000LX/100FX w DD, single-mode 1310nm, budget 13,0dB for 10km , LC, w orking temp. -40°C to +85°C
SFP-GLX-SM20-H
SFP module 1000LX/100FX w DD, single-mode 1310nm, budget 17,0dB for 20km , LC, w orking temp-40°C to +85°C
SFP-TTX
SFP module for 100FX slot to copper Ethernet 100BaseT RJ45
SFP-TGTX
SFP module for 1000FX slot to copper Ethernet 10/100/1000BaseT RJ45
XFP-10G-SR-MM
XFP 10GE-LS module multi-mode 850nm, budget for 300m, LC/PC connector.
XFP-10G-LR-SM10
XFP 10GE-LR module singlemode 1310nm, budget for 10km, LC/PC connector.
XFP-10G-ER-SM40
XFP 10GE-ER module singlemode 1310nm, budget for 40km, LC/PC connector.
XFP-10G-ZR-SM80
XFP 10GE-ZR module singlemode 1550nm, budget for 80km, LC/PC connector.
XFP-10G-ZR-SM80-Cxx
XFP 10GE-ZR module singlemode CWDM lambda Cxx, budget for 80km, LC/PC connector.
SFP-10G-SR-MM
SFP+ 10GE-LS module multi-mode 850nm, budget for 300m, LC/PC connector.
SFP-10G-LR-SM10
SFP+ 10GE-LR module singlemode 1310nm, budget for 10km, LC/PC connector.
SFP-10G-ER-SM40
SFP+ 10GE-ER module singlemode 1550nm, budget for 40km, LC/PC connector.
SFP-10G-ZR-SM80
SFP+ 10GE-ZR module singlemode 1550nm, budget for 80km, LC/PC connector.
SFP-10G-ER-SM40-Cxxx
SFP+ 10GE-ER module singlemode CWDM color Cxx , budget 14 to 18dB for 40km, LC/PC connector.
SFP-10G-ZR-SM80-Cxxx
SFP+ 10GE-ER module singlemode CWDM color Cxx , budget for 80km, LC/PC connector.
SFP-STM1/4-xx
SFP module 100FX, STM1/STM4 -OC3/OC12 LC, w ith DDM
SFP-STM16-xx-D
SFP module STM1/STM4/STM16 or OC3/OC12/OC48 , w ith DDM
COPPER SFP MODULE, Standard range -5 to +70°C
XFP 10GE module standard range -10 à +70°C
SFP Plus 10GE module standard range -10 à +70°C
OTHER SFP MODULES
Smart Solutions for Smart Networks—www.cxr.com
-15-
Distribution of Ethernet POE
CXR offers a port folio of solutions to distribute together Ethernet/IP data and power over the Ethernet line as POE
Ethernet. Mainly used to deploy IP-camera, IP-phone, Wifi hot-spot, this technology can power many new products. These
are used in transportation (bus, train, road, airport), by energy suppliers/transporter, and in many industries as the
security survey In-door or Out-door.
ETHERNET POE
POE PsE port
This Power Sourcing Ethernet port feature supplies 48V power over the line to power feed
another equipment at the end of the line.
POE PD port
Device connected to POE port powered from the line, it is a Powered Device.
IEEE802.3af
Regulation describes the power feeding over Ethernet lines: The PsE port should supply 48v
(44 to 57V) with 15,4W and 350mA. The PD port should receive 37 to 57V w a maximum of
12,95W. Lower level are accepted particularly for Cat3 cables. Four class 0, 1 ,2, 3 describe this levels.
This class 4 regulation involves higher power. PsE should supply 30/34,2W and PD will receive 25,5W.
Power Over Line: In one pairs of DSL modems, the local modem is power-feeding the remote modem over the line. The remote modem could be POE PSE of his local Ethernet
ports. The distance is limited by the temperature dispersion as the copper diameter is
smaller.
IEEE802.3at
POL
Power supplies for switches and converters
with Industrial & Hardened casing
CXR offers AC/DC and DC/DC converters to
power our range of switches and Ethernet
converters. For selection please consider:
 Voltage and power requirements.
 Connection: terminal block, self blocking
jack or standard jack.
 Din-rail/desktop/single block and working
temperature
ACDC-48V-35W
AC to DC 48V 35W adapter for MD, FO, CV, TS, CIP delivered in 48V (include 1200000112+7055140107)
PS-DIN-12V-40W
AC/DC DIN rail pow er 40W, Input 85 to 264Vac, output on terminal block 12V 0 to 3,33A , L x H x D =40x90x100
PS-DIN-12V-75W
AC/DC DIN rail pow er 75W, input 85 to 264Vac, output on terminal block 12V 0 to 6,3A , L x H x D =55x125,2x100
PS-DIN-12V-120W
AC/DC DIN rail pow er 120W, input 85 to 264Vac, output on terminal block 12V 0 to 10A , L x H x D =65x125,2x100
PS-DIN-24V-30W
AC/DC DIN rail pow er 30W, input 85 to 264Vac, output on terminal block 24V 0 to 1,5A , L x H x D =78x93x56
PS-DIN-24V-240W
AC/DC DIN rail pow er 240W, input 88 to 264Vac, output on terminal block 24V 0 to 10A , L x H x D =63x125,2x113,5
ACDC-I-5V-9W-J25
AC to 5V DC 9W at -20 to 60°C, standard jack 2.5mm for FOC/FOCM and FOCD-I, AC cord IEC320/C3, plastic case
ACDC-I-48V-36W-J21
ACDC-H-12V-36W-P-JB
AC to 48V DC 36W at 0 to 40°C, 28W up to 50°C, 5.5/2.5mm standard jack for FOCD-I-TPS, DC cord 1.2m, AC cord IEC320/C8 1.5m w ith
European plug, plastic case
AC to 48V DC 36W at 0 to 40°C, 28W up to 50°C, 5.5/2.5mm standard jack for FOCD-I-TPS, DC cord 1.2m, AC cord IEC320/C8 1.5m w ith
UK plug, plastic case
AC to 12V 3A for Rail-DIN sw itch SWD-H and SWM-H , w orking temperature -40 to +75°C w jack , plastic case
ACDC-H-12V-36W-M-JB
AC to 12V 3A for for Rail-DIN sw itch SWD-H and SWM-H , w orking temperature -40 to +75°C w jack , metal case w fixation
ACDC-I-24V-30W-DP
AC to 24v 1,5A Adaptator for sw itch, w orking temperature -20 to +60°C block terminal, plastic box w ith DIN rail fixing
ACDC-48V-75W-DM
AC to 24v 1,5A Adaptator for sw itch, w orking temperature -20 to +60°C block terminal, plastic box w ith DIN rail fixing
ACDC-48V-120W-JB
AC to 24v 2,5A 120W Adaptator for sw itch, w orking temperature 0 to +50°C, blocking jack for Rail-DIN sw itch or FOC-H, plastic box
ACDC-I-48V-120W-DM
AC to DC48V 2,5A 120W adaptater for sw itch and media converter, tpure -10 to +60°C, terminal block, DIN-Rail metal box
ACDC-H-48V-240W-DM
ACDC-H-48V-480W-DM
DCDC-I-12-48V-84W-DM
AC to DC48V 5A 240W adaptater for sw itch and media converter, tpure -25 to 65°C and 75% at 70°C, terminal block, DIN-Rail metal box
AC to DC48V 10A 480W adaptater for sw itch and media converter, tpure -25 to 65°C and 75% at 70°C, terminal block, DIN-Rail metal box
DCDC-24-48-200W-DM
DC-DC converter 24V to 48V 200W, galvanic isolation w fan.
ACDC-I-48V-36W-J21UK
DC-DC converter 12V to 48V 1,78A 85W Adapter, tpure -10 à +60°C, terminal block, DIN rail metal box
CXR Anderson Jacobson – www.cxr.com – Rue de l'Ornette – 28410 Abondant – France
Telephone: +33 (0)2 37 62 87 90 – Fax: +33 (0)2 37 62 88 01 – Mail: [email protected]
-16-
Distribution of Ethernet POE
One box injects POE power over
Ethernet line and another box extracts
power to supply local equipments.
Ethernet POE injector and splitter
Ethernet
Ethernet
Ethernet POE
DC 48v
POE-100SE
AC
5, 9 or 12V
equipment
POE-100PD-xV
GSHDSL-Bis 11,7Mbps
3 Ethernet
2 to 11 km
Ethernet POE
CopperLAN-Bis-POE
VDSL 20 to 100Mbps from 1000 to 300m
DC 48v
4 Ethernet POE
VDD2-H-TPOE
VDD2-H-TPW
FE or GE POE extention over fiber FX or GSX/GLX
Ethernet POE
100FX MM or SM
FOCD-I-TPS-FX
DC 48v
AC
Unmanageable POE Switches, industrial DIN rail
Hardened -40 to +75°C
4 FE POE
SWD-I-4TPS-4TX
4 GE POE
SWDL-I-4GPS-GSF
Complies to IEC61000-6-2 for
CopperLAN-Bis-POE
Bridge/G.SHDSL-Bis 2/4 wire modem at
0,2 to 15Mbps up to 11km
4 x 10/100BaseT w 1 POE, VLAN, QoS...
VDD-H-TPW
Ethernet bridge/VDSL2 modem 2 wires,
up to 100Mbps, and up to 1.7km. POL the
distant over the DSL line.
Ethernet bridge/VDSL2 modem, remote
feed by the line, support 4 POE ports.
Media converter from fiber Ethernet to
copper FE or GE POE Ethernet
FOCD-I-TPS-SFP or FOCD-I-GPS-SFP
FX converts to 10/100BaseT or GSX/GLX
to 10/100/1000BaseT with POE PsE 30W
to feed local equipment.
DIN-Rail industrial/hardened switches
with dual 48Vcc power supply. Supports 4kV electric shock...
SWD-I-4TPS4TX / -4TPS3TX-FX..
4 FE with 4 POE 15,4W, 4 FE non POE,
0 or 1 100FX MM or SM, -10°C to + 60°C
SWD-H-4TPS4TX / -4TPS3TX-FX.. 4
FE with 4 POE 15,4W, 4 FE non POE,
0 or 1 100FX MM or SM, -40°C to + 75°C
4x10/100/1000BaseT POE ports 30W,
1 GSX/GLX SFP, -10°C to + 60°C
Supports 802.1x, VLAN 802.1q, QoS
802.1p, RSTP, MSTP, Alpha-Ring <15ms,
Truncking, IGMP...from -40°C + 75°C
SWMD-H-8TPS w 0,1 or 2 GE/GX
ITS Transport
Intelligent-building
Security control
Factories
SWMD-H-8TPS-2GE
SWM-H-16TPS-2GE
DIN case, 8 x10/100BaseT POE 15,4W,
0 to 2 x 1000BaseT/SX/LX
SWM-H-16TPS w 0,1 or 2 GE/GX
19’’ case ,16 x10/100BaseT POE 15,4W,
1 or 2 x 1000BaseT/SX/LX
Supports 802.1x, VLAN 802.1q, Q-in-Q,
QoS 802.1p, RSTP, MSTP, ESR-Ring
<50ms, Truncking, IGMP...
SWM-H-24TPS-2GPS-2GSX
Layer 2 & 3 POE Switches for Telco and Industries
SWM-24TPS-2UCB
SWM-8TPS-2UCB-AC ou DC
8 FE POE at 15,4W or 4 at 30W,
2 universal combo ports
SWM-24TX-2UCB-AC ou DC
24 FE POE 15,4W or 12 at 30W,
2 universal combo ports
SWM-8TPS-2UCB
Industrial -10 to +60°C
Splitter 5, 9 or 12Vcc from POE Ethernet
to supply local Non POE device.
SWDL-I-4GPS-GSF
SWD-H-4TPS-4TX
Layer 2 manageable POE Industrial Switches
-
POE-100PD-xV
VDD-H-TPOE
POL power feeding of the distant
Industrial -10 to +60°C
Power Sourcing box powered by AC
adapter injects POE 48V &15,4W.
Bridge/xDSL modem is extending LAN
and provides POE Ethernet for IPcamera, IP-phone, hot-spot….
Ethernet POE extension over xDSL
CopperLAN-Bis
POE-100SE
SW3G-20TGPS-4UCB
SWM-24GPS-4GSF-AC ou DC
24 GE POE 30W, 4 GSX/GLX SFP
Smart Solutions for Smart Networks—www.cxr.com
-17-
DIN-rail Industrial and Hardened
Unmanaged Ethernet POE switches
SWD-I-4TPS-4TX or
FOCI-I-GPS-GSF
SWD-H-4TPS-4TX .
SWDL-I-4GPS-GSF
MODELS
SWD-I-4TPS-4TX
SWD-I-4TPS-3TX-F
SWD-H-4TPS-4TX
SWD-H-4TPS-3TX-F
FOCD-I-GPS-GSF
SWDL-I-4GPS-GSF
AUTOMATIC
MANAGEMENT
Environnemental
Port capacity
Industrial -20 at 60°C
Factory test -20 at 70°C
Hardened -40 at 75°C
Factory test -40 at 85°C
Industrial compliance
E-MARK for coach/bus
8 FE
8 FE
√
2 GE
5 GE
√
√
1 x 10/100/1000BaseT
4 x 10/100/1000BaseT
√
IEC61000-6-2 Industrial generic, CE, FCC, UL608, NEMA TS1 & TS2
YES
YES
Copper UTP
4 or 3 x 10/100BaseT
4 or 3 x 10/100BaseT
POE PsE 802.3af (15,4W)
4
4
0 or 1 fixed 100FX
0 or 1 fixed 100FX
Ethernet ports
POE PsE 802.3at (30W)
Optical ports
Alarm relay
1
4
1 1000GSX/GLX SFP
1 1000GSX/GLX SFP
Yes set up per port or power supply
Physical / Electrical
Casing
IP30 aluminium
Rail-DIN
Fanless
IP30 aluminium
Rail-DIN
Fanless
IP30 plastic
Rail-DIN, Wall mounting
Fanless
IP30 plastic
Rail-DIN, Wall mounting
Fanless
Dimensions W x D x H mm
62 x 110 x 135
60 x 125 x 145
35 x 93 x 105
61 x 93 x 105
Power supply
2 are redundant
Consumpsion
w:o POE / w POE
2 x 48Vcc
jack 48Vcc
2 x 48Vcc
jack 48Vcc
2 x 48Vcc
jack 48Vcc
2 x 48Vcc
jack 48Vcc
/ 72 W
/ 72 W
4,2 W / 130 W
4,2 W / 130 W
MAC address table sizes
1024
1024
1024
2048
Packet buffer memory (Bits)
1M
1M
48K
128K
Performances
CXR Anderson Jacobson – www.cxr.com – Rue de l'Ornette – 28410 Abondant – France
Telephone: +33 (0)2 37 62 87 90 – Fax: +33 (0)2 37 62 88 01 – Mail: [email protected]
-18-
Industrial and Hardened Layer 2
managed Ethernet POE switches
SWM-H-24TPS-2GPS-2GX-I-4GPS-GSF
MODELS
SWMD-H-8TPS-G..
SWMD-H-8TPS-2G..
SWM-H-8TPS-1G..
SWM-H-8TPS-2G..
SWM-H-16TPS-2G..
SWM-H-24TPS
-2GPS-2GX/GSX
LAYER 2 MANAGED
MANAGEMENT
Environnemental
8 FE + 2 FE + 2 GE
16 FE + 2 GE
24FE + 4 GE
√
√
√
10/100BaseT POE PsE 802.3af
8 at 15,4W or
8 or 16 at 15,4W
24 FE +2 GE
10/100BaseT POE PsE 802.3at
4 at 15,4W and 4 at 30W
Port capacity
Hardened -40 at 75°C
Factory test -40 at 85°C
Industrial compliance
Ethernet ports
Copper 10/100BaseT
12 FE + 2GE
Optical ports 100FX
2 SFP
-
-
Uplink 10/100/1000BaseT
0 or 2
0 or 2
0 or 2
Uplink 1000FX
0 or 2
0 or 2
0 or 2
Optic
fixed or SFP
fixed or SFP
Fixed
IP30 metal, Rail-DIN
Fanless
IP30 metal, 19" 1U
Fanless
IP30 metal, 19" 1U
Fan
65 x 145 x 165
442 x 205 x 44
442 x 343 x 44 mm
2 x 48Vcc
jack 48Vcc
47 at 55 Vdc
1 ou 2
47 à 55 Vdc
15W / 132,3W 8 ports .3af
/210W 4p.3af + 4p. 2at
12W / 247W 16p. 3af
30 / 420W
MAC address table size
8192
8192
8192
Packet buffer memory (Bits)
2M
2M
2M
STP/RSTP
YES
YES
YES
MSTP
YES
YES
YES
Alpha Ring < 15ms
YES
YES
YES
Physical / Electrical
Casing
Dimensions W x D x H mm
Power supply
2 are redundant
Consumption
w:o POE / w POE
Performances
Network Redundancy
Management and network protocols
VLAN
Port VLAN,tagging 802.1q C-VLAN, GVRP
QoS 802.1p
802.1p with 4 priority queues
IGMP
Multicast with IGMP Snooping V1,V2 et V3
Access security
802.1x per port with Radius client
24 MAC address
set up per port
802.3x
Flow control
Rate access limiting
Ingress/Egress per ports per 62kbps step
Other protocols
Truncking/MAC address, Port Mirroring, NTP client and relay
Ethernet
10/100Mbps Full/Half Duplex, 1000Mbps Full Duplex,
Auto-negociation,
MDI/MDIX,
Wire-Speed
tranfert ,
Console port,
Telnet, SNMP
V3, RMON,
Management
Web browser, TFTP and CLI
Smart Solutions for Smart Networks—www.cxr.com
-19-
‘’Carrier Ethernet’ POE switches
Layer 2 & 3 manageable
MODELS
SWM-8TPS-2UCB-S22
SWM-24TPS-2UCB-S22
SWM-24GPS-4GSF-ACS48
SW3G-20TGPS-4UCB-AC
Layer 2
Layer 3
Layer 2
MANAGEMENT
Environnements
Port capacity
8 FE + 2 GE
24FE + 2 GE
24 GE + 4 GX
24 GE + 4 10GE
Working temperature
-10° to -60°C
-10° to -60°C
-10° to -50°C
-10° to -50°C
CE, FCC
Industrial compliance
Ethernet ports
10/100BaseT POE PsE 802.3af
8 at 15,4W
24 at 15,4W
10/100BaseT POE PsE 802.3at
4 at 30W
12 at 30W
10/100/1000BaseT POE PsE 802.3af
24 at 15,4W
10/100/1000BaseT POE PsE 802.3at
24 at 30W
UPLINK
2 universal combo ports
10/100/1000BaseT and
SFP 100FX or 1000SX/LX/ZX
2 universal combo ports
10/100/1000BaseT and
SFP 100FX or 1000SX/LX/ZX
4 SFP 1000SX/LX/ZX
Optional
20 at 15,4W
4 universal combo ports 10/100/1000BaseT and
SFP 100FX or 1000SX/LX/ZX
2 x 2 XFP 10GE modules
Physical / Electrical
metal
19" 1U
Fan
Casing
Dimensions W x D x H mm
Power supply
2 are redundant
Consumption
w:o POE / w POE
metal
19" 1U
Fan
metal
19" 1U
Fan
300 x 240 x 44
440 x 340 x 44
version -A-S22 : AC 176 at 264V
version -D-S22 : DC -36 at -72Vcc
/ 124W
metal
19" 1U
Fan
440 x 400 x 44
Internal AC 176 at 264V 500W
optionnal +500W AC power
Internal AC 176 at 264V 500W
optionnal +500W AC power
/720W
/420W
/ 400W
Performances
MAC address table sizes
8K
16K
16K
Packet buffer memory (Bits)
2M
2M
2M
Troughput/Switch fabric
42Mbps / 56Gbps
Network Redundancy
STP/RSTP
YES
YES
MSTP
YES
YES
YES
Alpha Ring < 15ms
ESR Ring <50ms
R-Ring <50ms
R-Ring <50ms
Routing
-
Static routing, VLAN routing
VLAN
Port VLAN,tagging 802.1q C-VLAN, S-VLAN, GVRP, VLAN
protection 1:1 and 1:n
VLAN per port and tagging 802.1q , SVLAN/C-VLAN Q-in-Q and GVRP
QoS 802.1p
802.1p with 4 priority queues
IGMP
Multicast with IGMP Snooping V1,V2 et V3
Access security
802.1x per port with Radius client
20 MAC address set up
YES
Management and network protocols
Port and tag 802.1p, IPV4 ToS/DiffServ,
IPV6 Traffic Class, 8 priority queues
Multicast IGMP Snooping V1,V2 and V3,
Proxy IGMP and IGMP fast leave
802.1x per port with Radius Client, ACL …
see datasheet
802.3x
Flow control
Ethernet
Management
Truncking/MAC address, Port Mirroring 1:1 and 1:n, SNTP
client and relay
10/100Mbps Full/Half Duplex, 1000Mbps Full Duplex,
Auto-negociation, MDI/MDIX, Wire-Speed tranfert ,
Console port, Telnet/SSH, SNMP V3, RMON,
Web browser, TFTP and CLI
DHCP server/relay and option 82, LACP
truncking, NTP client and relay…
10/100Mbps Full/Half Duplex, 1000Mbps Full
Duplex, Auto-negociation, MDI/MDIX
Over console port or LAN or WAN with
Telnet/SSH, SNMP V1/V2/V3, RMON, Web
browser*, TFTP and CLI
MEF and cross-administration
CXR Anderson Jacobson – www.cxr.com – Rue de l'Ornette – 28410 Abondant – France
Telephone: +33 (0)2 37 62 87 90 – Fax: +33 (0)2 37 62 88 01 – Mail: [email protected]
-20-
Port and tag 802.1p, IPV4 ToS/DiffServ, IPV6
Traffic Class, 8 priority queues
Multicast IGMP Snooping V1,V2 and V3, InterVLAN multicast duplication, PIM-SM
802.1x per port with Radius Client, ACL … see
datasheet
Ingress/Egress per ports by 62kbps step
Rate access limiting
Other protocols
Static routing, VLAN routing,
RIP 1&2, OSPF v2, BGP v4
VLAN per port and tagging 802.1q , S-VLAN/CVLAN Q-in-Q and GVRP
DHCP server/relay and option 82, LACP
truncking, NTP client and relay…
10/100Mbps Full/Half Duplex, 1000Mbps Full
Duplex, Auto-negociation, MDI/MDIX
Over console port or LAN or WAN with
Telnet/SSH, SNMP V1/V2/V3, RMON, Web
browser*, TFTP and CLI
MEF 9, MEF 14, OAM Ethernet , 802.3ah, Y.1731,
IEEE802.1ag
Ethernet /Gigabit Ethernet/10 Gigabit
Media conversion copper/fiber/fiber
CXR manudfactures a large range of fiber optic converters, multiplexers… particularly for TDM, analogue, legacy
and Ethernet/Gigabit/10Gigabit media converters from “Copper to Fiber” or “Fiber to Fiber” as pure converter
or with switching for rate adaptation. They are used as interfaces adaptation, modem over fiber, fiber booster
or transponder from standard wavelength to CWDM or DWDM. We supply Media Converters:





Automatic or Web/SNMP managed converters and chassis of conversion
Transparent to 9K Jumbo Frame or with VLAN/Q-in-Q tagging
Link alarm in case UTP or fiber is coming down
Standard, Industrial and hardened
Fixed or SFP fiber transceivers MM, SM up to 200km, CWDM and DWDM
- COPPER to FIBER FOC-TTX-FX
Media and rate conversions
Automatic converter,
10/100Baset to 100FX or 100Bt/100FX
FOC-TGTX-GSX/GLX or SFP
Automatic converter,
10/100/1000Baset to 1000SL/LX/ZX
Fixed Fiber MM, SM to 100km or
SFP simple, WDM, CWDM, DWDM
LAN extension over fiber optic
FOC-2x10G-SFPP
Automatic converter,
10G to 10G with 2 SFP+
Ethernet Copper
10BaseT
100BaseT
1000Baset
10G UTP
FOCM-TTX-FX or SFP
Gigabit Ethernet transport network- Q-in-Q and Ethernet demarcation, OAM
FOCM-TGTX-GSX/GLX or SFP
Web/SNMP manageable converter
10/100/1000Baset to 1000SL/LX/ZX
VLAN & Q-in-Q tagging, filter, rate limiting, RMON
Ethernet Fiber
10FL
100FX
1000SX/LX/ZX
10G-SR/LR/ER/ZR
Web/SNMP manageable converter
10/100Baset to 100FX or 100Bt/100FX
RACK-MEDIA16
Chassis for 16 FOC, FOCFF,FOCM.
Booster, CWDM/DWDM transponder for Ethernet fiber
- FIBER to FIBER FOCFF-USFP-USFP
2 fibers
WDM
CWDM
DWDM
Automatic converter dual SFP,
100FX to 100FX and 1000FX to 1000FX
FOS-25G-SFP-SFP
Fiber
2 cores, WDM
CWDM, DWDM
100FX
1000SX/LX/ZX
STM1/4/16
100FX
1000SX/LX/ZX
STM1/4/16
Fiber
2 cores, WDM
CWDM, DWDM
Industrial/Hardened media converters standard or with POE PSE
Ethernet POE
100FX MM or SM
FOCD-I-TPS/TGPS-
1000SX/LX
DC 48v
AC
3R optic conversion from 10Mbps to
2,5Gbps, dual SFP, conversion, booster,
transponder for CWDM/DWDM.
- INDUSTRIAL/HARDENED FOCD-I-TTX-FX
FOCD-I-TGX-SX/LX
Din-rail Industrial converter
-10 to +60°C
FOCD-I-TPS-FX
FOCD-I-TPG-SX/LX
Din-rail Industrial converter
POE source 802.3at 30W
FOCD-H-TTX-FX
FOCD-H-TGX-SX/LX
Din-rail Hardened converter
-40 to +75°C
AMS-MEDIA16-SNMP
Web/Telnet/SNMP Chassis for
16 FOCIR card
FOCIR-TTX-FX
FOCIR-TGTX-GSX/GLX
Converter cards,
10/100Baset to 100FX or
10/100/1000Baset to 1000SL/LX/ZX
MM, SM to 100km, WDM, CWDM
Smart Solutions for Smart Networks—www.cxr.com
Carrier Transport Ethernet Network
EoPDH - EoSDH/Sonet - EFM-Gshdsl - HVLAN - EDD
CXR supplies solutions for Carrier Ethernet Network and services. These run over multiple infrastructures: PDH,
SDH, copper DSL, fiber or Ethernet backhaul. These solutions are used by Telco in low density area with mix
accesses or by Utilities, Transportation or Defense infrastructures to develop implement networks.
The deployment of Q-in-Q is provided by commissioning EDGE devices. The Hierarchical-VLAN is federating
bandwidth of central backbone with low administration costs.
CXR launch a new range of switches with Ethernet Demarcation Device (EDD) function. This Edge equipments support
SyncE and PTP 1588v2 slave which give to EDD a high level of precision to synchronize the clock and phase of
connected CESoPSN equipment, IP-BTS 3.5G or 4G/LTE.
EoPDH
EoSDH/EoSonet
Carrier Ethernet / EDD
CXR Anderson Jacobson – www.cxr.com – Rue de l'Ornette – 28410 Abondant – France
Telephone: +33 (0)2 37 62 87 90 – Fax: +33 (0)2 37 62 88 01 – Mail: [email protected]
-22-
E1/T1, E3/DS3, STM1/STM4 Pseudo-Wire
Transmission encapsulated over IP/Ethernet
CXR supplies solutions to interconnect PDH and SDH nodes over Ethernet backhaul with synchronization of distant
isolated devices. These solutions carry over New Generation Packet Network synchronous TDM applications and low
latency with high reliability structures which are used in Utilities, Transportation or Defense areas.
Based on SAToP, CESoPSN/E, TDM over IP protocols according to RFCs CXR offer a large range of devices from small
CPEs to large concentration systems or integrated cards in PDH/SDH multiplexer compatible with other vendor.
We carry in Pseudo-Wire over Ethernet/IP unframed/framed E1/T1 for voice E1-CAS, E1-R1, ISDN E1/T1 PRI, for
2G/3G+ E1 A-Bis, A-Ter, E1/T1 ATM, E3, DS3 and SDH STM1 or STM4.
We provide Point to Point or Multipoint transport and save additional cross connect or SDH multiplexers.
Extension of TDM, interconnexion of PDH Networks over IP/Ethernet
Extension of SDH and E1/T1 Network over NG Packet Network
Extension of unstructured data over IP/Ethernet
Smart Solutions for Smart Networks—www.cxr.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement