8 DSP extension for modular elmeg ICT systems

elmeg Module 8 DSP

• 8 voice channels for media crossing

• Codecs: G.711, G.723, G.726, G.729

elmeg Module 8 DSP

8 DSP extension for modular elmeg ICT systems

Module M 8 DSP provides 8 DSP channels for modular elmeg ICT systems (ICT, hybird 300 / 600) and ensures the media transfer to IP telephones or to SIP providers.

Product description

To provide optimum voice quality with minimum bandwidths, the standard voice codecs G.711, G.723.1, G.726, and G.729a/b are supported.

In elmeg ICT systems

With the combination of elmeg ICT PBX,

VoIP-VPN Gateway, and up to two extension modules M 8 DSP is the ICT system converted to a complete switched network-to-IP gateway.

This permits the transition of IP voice data into the traditional voice network and vice versa.

In elmeg hybird 300 / 600 systems

With respect to media transfer, i.e. the connection from "traditional" technology to IP telephones or to SIP providers, the elmeg hybird 300 / 600 can be upgraded if required by a further 2 powerful DSP modules (special module slots) that provide parallel usable media transfers.

Variants

M 8 DSP (1092316) Module with 8 digital, highly compressed voice channels, speech compression

(Codecs) as per G.711, G.723.1, G.726, G.729a/b

Teldat GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany

Phone: +49 - 911 9673-0 - Telefax: +49 - 911 688 07 25

E-Mail: [email protected] - www.teldat.org

elmeg Module 8 DSP

25.10.2013

Subject to technical alterations

Page 2 / 2