high definition amplified telephone

high definition amplified telephone
HIGH DEFINITION AMPLIFIED TELEPHONE
Operating Guide
Manuel de l’utilisateur
HD 40P
Copyright © 2008 Serene Innovations, Inc. All rights reserved.
06-08
!
Important safety Instructions
WARNING – When using telephone equipment or electric appliances, basic precautions should always be followed to reduce the risk
of fire, electrical shock and injury to persons, including the following:
1. Read all the instructions before using the appliance.
2. To reduce the risk of injury, close supervision is
necessary when an appliance is used near children.
3. Do not contact moving parts or any exposed metal
surface.
4. Only use attachments recommended or sold by the
manufacturer.
5. Do not use outdoors. Do not use near water, for
example, near a bath tub, wash bowl, kitchen sink or
laundry tub, in a wet basement or near a swimming
pool.
6. To disconnect, turn all controls to the off position,
then remove plug from outlet.
7.
Do not unplug by pulling on cord. To unplug, grasp
the plug, not the cord.
8. Unplug from outlet when not in use and before servicing or
cleaning.
9. Do not operate any appliance with a damaged cord or plug, or
after the appliance malfunctions or is dropped or damaged in
any manner. Return appliance to the nearest authorized service
facility for examination, repair, or electrical or mechanical
adjustment.
10. Use only the power cord and batteries indicated in the manual.
Do not dispose of batteries in fire. They may explode. Check
local codes for possible special disposal instructions.
11. Plug any power adapter to the socket-outlet that near the
equipment and should be easily accessible.
12. Avoid using any telephone product during an electrical storm.
There may be a remote risk of electric shock from lightning.
13. Do not use the telephone to report a gas leak in the vicinity of
the leak.
“SAVE THESE INSTRUCTIONS”
2
English
Package Contents
Your package includes all the items as shown here. If there
is anything missing, please contact our Customer Care
Department immediately.
1
2
3
4
5
6
7
10
9
8
15
4
12
13
14
11
16
English
Feature Identification
1. Handset hook (for wall mounting use only)
2. One-touch memory dialing buttons
3. Hold (press to put call on hold and to mute the handset, lift the
handset or a quick press of the hook switch releases the Hold)
4. Prog (press to program number into memory)
5. Amplify (press to turn on/off the powerful handset amplifier
manually)
6. Flash (press to switch between current call and the call waiting)
7.
Redial (This is a dual function button. It is a last number redial
button during normal usage. However, it becomes a PAUSE
button during memory programming. Press this button inserts
a 2-second pause into the phone number string. For example:
9 PAUSE 755 8222 dials 9 and then pauses for 2-second before
dialing out rest of the phone number.)
8. Tone/Pulse (This slide switch selects tone dialing or pulse
dialing. Tone dialing is faster).
9. Ringer Tone (to select a ring tone to suit your hearing)
10. Ringer Volume (to select a ringing volume level to suit your
hearing)
11. Speaker on/off with indicator (Press this button to turn
on / off the speakerphone for hands-free dialing or
conversation. Handset must be on its cradle in order for
this feature to work.)
12. Tone (to enhance speech clarity; move it until you hear the
best incoming speech clarity while on the phone. Positions
1 thru 4 enhance low, mid, mid-high, and high tone part of
the speech respectively)
13. Volume (to adjust the volume of the handset).
14. Amplify LED indicator
15. Call-on-hold visual indicator.
16. Amplifier Auto On/Off (On: the amplifier will come on
automatically and return to the previous level setting
every time you lift the handset. Off: the amplifier will not
come on automatically; you must press Amplify to turn
on the amplifier).
Connections
Connect your phone as shown. When
finished, lift handset to test. If you hear a
dial tone, your telephone is ready. If not,
check all connections again.
6
English
Wall Mounting
1
2
3
1. Slide out the handset hook, turn it upside down and reinsert. This hook keeps the
handset in place when wall mounted.
2. Fit the wall mount bracket into the base of the phone.
3. Connect the short phone cord. Align and put the mounting holes over the heads
of the wall plate screws (make sure the screw head protrude enough, if not, use
a screw driver to adjust) and slide the phone downward slightly to lock the phone
in place.
Using the Speakerphone
1
1. Press the Speaker button to turn on the speakerphone. Or, if
you are on the phone, press the Speaker button then returns the
handset back to its cradle.
2. Adjust the Volume switch to reach a comfortable level.
3. Press the Speaker button again to end the call.
8
2
3
4. Press the HOLD button during a call mutes the microphone and
the call is placed on Music-On-Hold mode. Press it again releases
the hold and un-mutes the microphone.)
English
Amplifying incoming sounds Manually/Automatic
1. When you are on the phone, press the Amplify button to turn on
the amplifier
2. Adjust the Volume switch to reach a comfortable sound level.
3. Adjust the Tone switch until you can hear the incoming voice
clearly. This needs to be done the first time you use the phone only
and you can leave this setting for all future calls.
4. If you want the amplifier to come-on automatically every time
you use the phone, slide the Amplifier Auto On/Off switch on the
underside to the On position. To turn off the amplifier (for the non
hard-of-hearing user), press the Amplify button. To return to the
Auto-on mode, press
Amplifier again.
Programming Number for One-Touch Memory Dialing
1
2
1. Lift the handset, press PROG.
2. Dial the phone number you wish to save (maximum of 15 digits).
3. Press PROG again.
10
3
4
4. Press the memory button you wish to store the phone
number, then hang up the phone.
English
Insert Photo in Memory Button
1
2
3
Cut your photos using the template provided as a guide. Lift the transparent cover of
the memory button and insert the photo. Replace the cover when finished.
Troubleshooting
If you encounter any difficulties, please check the following before calling our Customer Care Department for assistance.
The phone does not ring or rings very soft when there is an incoming call
Check and make sure the ringer volume switch on the side of the phone is set to HI or MED. If this switch is set to LO,
the phone rings very soft.
No Dial Tone
12
1.
Check and make sure all the phone cords are connected properly and securely.
2.
Make sure the phone wall outlet is working properly by trying the phone with another phone wall outlet.
3.
If there is still no dial tone, there may be a problem with your phone line and you need to contact your telephone
company.
4.
If there is dial tone on another telephone in your house, there may be a problem with this phone and contact our
Customer Care Department for assistance.
English
Warranty Service Information
Your HD Phone comes with one-year limited warranty. We warrant during this warranty period, from the date of purchase, to the
original consumer, the HD Phone to be free from defects in materials and workmanship under intended home use. In the event
that HD Phone fails to function properly within one year of original purchase due to defects in materials or workmanship, return
the unit (freight prepaid) with proof of purchase (sales receipt or packing slip, no exceptions) to Serene Innovations. Serene
Innovations will either repair or replace the unit (with a refurbished unit or unit of equal condition) and return it to you (using UPS/
USPS ground shipping) at no cost to you if the unit is returned within 30 days of purchase. If the unit is returned after 30days of
purchase but within the warranty period, there will be a warranty handling charge of $9.95 for each return.
This warranty does not apply to any product that has been accidentally damaged, abused, misused or negligent, used
on electrical frequency or voltage other than marked on product and/or described in manual. Defects or errors caused by
unauthorized alterations, repairs, and/or tampering are also not covered by this warranty.
This Warranty gives you specific legal rights, and you may also have other legal rights that vary from states to states.
If a defect covered by this warranty should occur, promptly contact a Customer Care Representative by phone or log onto www.
sereneinnovations.com to obtain a Return Authorization Number (RAN) and shipping instructions before shipping the product
to us. Any shipment without a RAN will not be accepted and will be returned to you at your expense. Any authorized returned
product must be accompanied with proof of purchase and a brief explanation of the problem.
For out of warranty repaired and service, please contact our Customer Care Department for directions.
FCC Compliance
This equipment complies with Part 68 of the FCC
Rules. On the equipment is a label that contains,
among other information, the FCC registration
number and ringer equivalence number (REN)
for this equipment. If requested; this information
must be provided to your telephone company.
Your telephone company may make changes in
its facilities, equipment, operations or procedures
that could affect the proper functioning of
your equipment. If they do, you will be notified
in advance to give you an opportunity to
maintain uninterrupted telephone service.
If your home has specialty wired alarm equipment
connected to the telephone line, ensure the
installation of this equipment does not disable
your alarm equipment. If you have questions
about what will disable alarm equipment, consult
your telephone company or a qualified installer.
This equipment uses the following Universal Service
Order Codes (“USOC”) jacks: RJ-11. Connection
to the telephone network should be made by using
standard modular telephone jack type RJ11.
In the event this equipment should fail to operate
properly, disconnect the unit from the telephone
line. Try using another FCC approved telephone
in the same telephone jack. If the trouble persists,
call the telephone company repair service bureau.
This equipment is hearing aid compatible.
The REN is useful to determine the quantity of
devices you may connect to your telephone line
and still have all of those devices ring when your
telephone number is called. In most, but not all
areas, the sum of the RENs of all devices connected
to one line should not exceed five (5.0). To be
certain of the number of devices you may connect
to your line, as determined by the REN, you
should contact your local telephone company to
determine the maximum REN for your calling area.
If your telephone equipment causes harm to
the telephone network, the telephone company
may discontinue your service temporarily. If
possible, they will notify you in advance. But if
advance notice is not practical, you will be notified
as soon as possible. You will be informed of
your right to file a complaint with the FCC.
14
If the trouble does not persist and appears to be with
this unit, disconnect the unit from the telephone line
and discontinue use of the unit until it is repaired.
For repair or warranty information, please contact
Serene Innovations, Inc. at 562- 407 5400. Please
note that the telephone company may ask that you
disconnect this equipment from the telephone network
until the problem has been corrected or until you’re
sure that the equipment is not malfunctioning.
There are no user serviceable parts in this equipment.
This equipment may not be used on coin
service provided by the telephone company.
Connection to party lines is subject to state
tariffs. Contact the state public utility commission,
public service commission for information.
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference
received, including interference that
may cause undesired operation.
Operating Environment for Home or Office Use
Notice: This equipment has been tested and found
to comply with the limits of a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation, if this equipment does cause
harmful interference to radio or television reception,
English
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
s 2EORIENT OR RELOCATE THE RECEIVING ANTENNA
s )NCREASE THE SEPARATION BETWEEN
the equipment and receiver.
s #ONNECT THE EQUIPMENT INTO AN OUTLET
on a circuit different from that to which
the receiver is connected.
s #ONSULT THE DEALER OR AN EXPERIENCED
radio/TV technician for help.
Modification: Any modification not expressly
approved by the manufacturer of this device could
void the user’s authority to operate the device.
NOTICE: The Industry Canada label
identifies certified equipment.
This certification means that the equipment
meets telecommunications network protective,
operational and safety requirements as
prescribed in the appropriate Terminal Equipment
Technical Requirements document(s). The
Department does not guarantee the equipment
will operate to the user’s satisfaction.
Before installing this equipment, users should ensure
that it is permissible to be connected to the facilities
of the local telecommunications company. The
equipment must also be installed using an acceptable
method of connection. The customer should be aware
that compliance with the above conditions may not
prevent degradation of service in some situations.
Repairs to certified equipment should be coordinated
by a representative designated by the supplier.
Any repairs or alterations made by the user to this
equipment, or equipment malfunctions, may give
the telecommunications company cause to request
the user to disconnect the equipment. Users should
ensure for their own protection that the electrical
ground connections of the power utility, telephone
lines and internal metallic water pipe system, if
present, are connected together. This precaution
may be particularly important in rural areas.
The Class B digital apparatus meets all
requirements of the Canadian InterferenceCausing Equipment Regulation.
Cet appareil numberique de la Class B
respecte toures les exigencies du Reglement
sur le materiel brouilleur du Canada.
Caution: Users should not attempt to make such
connections themselves, but should contact
the appropriate electric inspections authority, or
electrician, as appropriate. The REN for this amplified
telephone as stated on the IC regulatory label located
on the bottom of the product is REN # 0.9B
NOTICE: The Ringer Equivalence Number (REN)
assigned to each terminal device provides an
indication of the maximum number of terminals
allowed to be connected to a telephone interface.
The termination on an interface may consist of
any combination of devices subject only to the
requirement that the sum of the Ringer Equivalence
Numbers of all the devices does not exceed 5.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement