advertisement
ABB Automation products | 2
Status LED Display
CPU Operation and onboard I/O status
Run / Stop Switch
Control CPU operation
Ethernet CPU (In selected models)
With RJ45 Port
COM1
Online access, Modbus RTU master/slave, CS31-Bus master, ACSII
Integrated onboard I/O
Convenient cost effective solution
ABB Automation products | 3
ABB Automation products | 4
Click on
“Documentation”
Choose “AC500 +
CoDeSys”
Opens new window
ABB Automation products | 5
Select “open”
Select “Index” Type “PM564-T-ETH” and press ENTER
ABB Automation products | 6
Menu Bar Tool Bar Workspace
Object
Organizer
Message
Window
ABB Automation products | 7
ABB Automation products | 8
ABB Automation products | 9
ABB Automation products | 10
ABB Automation products | 11
ABB Automation products | 12
By default
If Internet access is existing CBP shows by default ABB homepage
ABB Automation products | 13
1
Choose the type of CPU
2
Select where do you want to store the project
3
Select “OK” to start.
2
The IO tab will be open on your right window with 2 child tabs. The 1 st tab is
IO configuration, Click on the 2 nd tab for
IO Mapping
1
To create IO variable for the CPU, go to expand OBIO and then double click on the IO (Onboard IOs) selection
ABB Automation products | 14
Click to expand.
Click to expand.
Double click on the cell and give the name of the IOs as shown.
Double click on the cell and give the name of the IOs as shown.
Click on I/O mapping tab
ABB Automation products | 15
ABB Automation products | 16
ABB Automation products | 17
ABB Automation products | 18
1. Click this field
2. Click on the BOX icon
Select “???”, and press
F2, the Input assistant window below will appear
ABB Automation products | 19
ABB Automation products | 20
Right click here and select “Assign”
ABB Automation products | 21
ABB Automation products | 22
ABB Automation products | 23
ABB Automation products | 24
-
-
ABB Automation products | 25
4
Key in your desired IP address and subnet mask then click “OK”
1
Select Local Area
Connection
2
Select “Internet Protocol
Version 4 (TCP/IPv4)”
3
Choose “Properties”
ABB Automation products | 26
1
2
Activate “Force IP settings”
3
Enter now the new IP address, subnet mask and standard gateway here
ABB Automation products | 27
ABB Automation products | 28
Choose
“Online”
Choose
“Local”
Select “Communication
Parameters”
Select
“Gateway”
Enter the new parameters:
IP address: xx.xx.xx.xx
Port: 1201
Motorola byte order: Yes
Then press “ENTER” and “OK”
Define a name for the connection
Select driver
“TCP/IP” then click
“OK”
Select
“New”
ABB Automation products | 29
1
Click on Windows
Start Button
2
Click on
“Control Panel”
ABB Automation products | 30
Select “Online”
ABB Automation products | 31
Choose “Local”
Define a name for the connection
Select driver “Serial” then click “OK”
ABB Automation products | 32
Choose “Communication
Parameters”
Select
“Gateway”
Click
“New”
Select
“Online”
Enter the new parameters:
Port: COM number in PC
Baudrate: 19200
Parity: No
Stop bits: 1
Motorola byte order: Yes
Flow Control: Off
Then press “ENTER” and “OK”
ABB Automation products | 33
ABB Automation products | 34
Double click on the FALSE state, you will see a blue indication of “TRUE” on the right. This information indicates that you want to set the value to TRUE.
ABB Automation products | 35
ABB Automation products | 36
ABB Automation products | 37
ABB Automation products | 38
Click
“Visualization”
ABB Automation products | 39
ABB Automation products | 40
Click icon
To put the variable, put your cursor in the blank and press F2
ABB Automation products | 41
ABB Automation products | 42
Similarly, press F2 to bring up the Input
Assistant
Click icon
To bring up the Input Assistant, put your cursor in the blank and press F2, then choose the desired variables from the list.
ABB Automation products | 43
ABB Automation products | 44
ABB Automation products | 45
ABB Automation products | 46
Type here
1
Click on
“Project”
2
Click on
“Options”
3
Click on
“Desktop”
4
Select the preferred language
5
Click “OK”
ABB Automation products | 47
ABB Automation products | 48
ABB Automation products | 49
ABB Automation products | 50
Right click on AC500 and select “Create Config”
Click icon
Click icon
ABB Automation products | 51
Uncheck this box to view the different function blocks in alphabetical order.
ABB Automation products | 52
Click icon
ABB Automation products | 53
Click icon
ABB Automation products | 54
Parallel Contact
Set Coil
Reset Coil
ABB Automation products | 55
ABB Automation products | 56
1
Click on
“Resource Tab”
2
Click on “PLC
Browser”
3
Click on
“Diagshow all”
ABB Automation products | 57
ABB Automation products | 58
ABB Automation products | 59
ABB Automation products | 60
Note:
advertisement
Related manuals
advertisement