Foster | 8331 012 | Datasheet | Foster 8331 012 equipment cleansing kit

22
The Sinks
Sinks
Foster takes great care to use materials able to provide the best performance.
Our entire range is made with AISI 304 - 18/10 austenitic steels. Thanks to the
high percentages of chrome and nickel they contain, they give a particularly
bright finish, and make the products extremely sturdy and absolutely resistant
to rust and corrosion.
S4001 page 38
Alien 2 page 66
S4000 page 41
Triplo invaso page 68
Quadra page 43
F2000 page 70
Quadra S page 47
Trapezio page 72
KE page 48
Diamant page 73
S3000 page 51
Angolare page 74
FM page 54
Rondò page 76
KS page 56
Circolari page 77
Big Bowl page 59
S1000 page 78
Big Bowl Soft page 61
Undermount
sinks
page 82
Uragano page 62
Tornado page 63
Complements page 104
23
Designer finishes
The exclusive finishes on Foster steels are the result of painstaking research, the aim being to achieve the perfect combination
between good looks and functionality.
A distinctive feature, a true trademark that makes our products stand out for the ease with which they can be cleaned.
Foster
finish
Foster brushed finish
The steel is treated with special vegetable
fibres that give it the characteristic
extrafine satin finish that is highly elegant
and functional. This makes the surfaces
very smooth and easy to clean.
244
Microfoster
finish
Microfoster® finish
A scratchproof finish with an exclusive,
extrafine and almost imperceptible
textured appearance that gives the steel
a special shine and sets off the style to
its best effect.
Design
finish
Design finish
Scratchproof finish with an original and
elegant texture that protects the material
from accidental scuffing and from wear
through use.
Built-in and beyond
Sinks
The methods with which worktops can be built-in have become increasingly more varied and customized. Foster was the first
sink manufacturer to have researched and used the new recessing methods and has thus acquired a great deal of experience.
It now offers the most comprehensive range available on the market, with flush-mount, flat-edge and undermount installation.
67'
4
Q4
Standard
Traditional built-in with the vertical, 8-mm The casing has a square edge that
stands on the work surface by just 4 mm.
edge.
Great solution to match the sink with the
ceramic glass hobs (Induction).
)7
6)
Flat-edge
An original edge, with an inclined, 3
mm high profile, matching an extreme
elegance with the easiness of installation.
67
FT
Flush-mount
The product is sunk in 1,5 mm deep
recess thus beeing perfectly flush with
the worktop. As alternative, it can be
installed on the worktop as well.
Undermount
A classy and contemporary idea, to be
installed under the worktop; available
in various types of sinks, with soft or
square design.
Built-in
The most stylish and assertively
professional solution is to weld the sink
to the stainless steel worktop, producing
one sleek, seamless block.
Flush-mount & Flat-edge: a clarification to be done
Many manufacturers indicate as Flat-edge a Flush-mount edge mounted on the
worktop.
6)
For Foster Flat-edge means a real alternative built-in solution with an elegant 3 mm
sloping edge.
)7
FT
In any case, Foster's Flush-mount models can be mounted on the worktop (as in
the detail in the picture), thus offering a further built-in solution.
25
26
Features
In designing a kitchen, it is essential to create a washing area tailored to one’s requirements.
As a matter of fact, statistics show that most of the time spent in the kitchen involves preparing and cleaning food or washing
dishes, therefore, using the sink.
Sinks
Essential aspects to consider when choosing a sink include the quality of the steel, manufacturer’s warranty, shape and size of
the bowls and available accessories, be they standard or optional. Foster offers all of this in over 300 items, to enable everyone
to choose his/her “OWN” sink.
Mixer hole
All Foster sinks (unless otherwise
requested) are supplied with the mixer
installation hole as a standard feature.
Several sink models may be requested
with two or three holes for immediately
inserting the automatic waste control or
dispenser. To verify the availability of the
second or third hole, please refer to the
specifications on the drawing, or contact
our offices directly (see page 104).
Waste fitting with remote control
The waste fitting with remote control
is part of the standard equipment
supplied with some of the models. A
very convenient accessory that saves
you from wetting your hands when the
bowl needs emptying (see page 107).
Accessories
To complement the functionalities of
the sinks, Foster offers a full range of
accessories, whether wooden chopping
boards, dispensers, baskets, dishes
holders or food waste disposers.
Sturdy sinks
For every type of sink (welded or singlemoulded) and price bracket, Foster works
with above-average steel thickness when
compared to other manufacturers. As a
result, also owing to our long experience,
we are able to construct “sturdy” sinks
displaying a unique design.
Spacious bowls
Thanks to the pioneering manufacturing
technology used, all the bowls in Foster
sinks provide a generous depth (even
the single-moulded versions, i.e. formed
from a single sheet of steel). The bowls
in many of the versions are more than
20 cm deep, thus sizeable and practical
for all washing operations.
Waste fittings
Foster sinks are equipped with a
generously sized 3.5” waste fitting and
practical strainer plug that prevents
solids from flowing away with the
waste water. The 3.5” drain allows
the Foster waste-disposer, which is
compatible with all models, to be used.
(Compatibility with the waste-disposer of
other manufacturers is not guaranteed).
27
On-top and flush-mount range
120
100
- models from 101 to 120 cm width
S4001 - page 38
NEW
KS - page 56
- models from 91 to 100 cm width
S3000 - page 51
S4001 - page 38
NEW
4
4
67'
)7
S4000 - page 41
Big Bowl - page 59
67'
)7
S4000 - page 41
6)
)7
FM - page 54
NEW
4
67'
)7
)7
4
67'
)7
Quadra - page 43
Quadra - page 43
KS - page 56
NEW
6)
)7
67'
Alien2 - page 66
6)
)7
67'
KE - page 48
67'
QuadraS - page 47
6)
)7
F2000 - page 70
67'
6)
S3000 - page 51
67'
)7
6)
S1000 - page 78
)7
FM - page 54
67'
67'
Uragano - page 62
6)
KE - page 48
6)
)7
67'
Alien2 - page 66
67'
S1000 - page 78
NEW
67'
6)
67'
67'
67'
Angular solutions
Angolari - pages 74-75
67'
28
)7
67'
On-top and flush-mount range
67
Undermount range
see pages 86-87
- models from 81 to 90 cm width
S4001 - page 38
Quadra S - page 47
FM - pages 54-55
Alien 2 - pages 66-67
NEW
4
)7
S4000 - pages 41-42
NEW
4
67'
)7
67'
Sinks
90
GK series sinks
see pages XII-XIV
KE - page 49
NEW
4
)7
4
67'
67'
KS - page 57
Triplo invaso - pages 68-69
NEW
4
)7
67'
6)
4
67'
)7
F2000 - page 70
NEW
4
)7
67'
6)
Quadra - page 44
67'
Big Bowl-BB Soft - pages 59-61
4
)7
NEW
67'
6)
)7
S3000 - pages 51-52
4
)7
4
67'
67'
4
)7
6)
)7
67'
S1000 - page 79
67'
67'
6)
)7
67'
67'
Continued on next page >>>
Semi-angular solutions
Key to symbols
67'
Trapezio - page 72
Diamant - page 73
4
6)
)7
Standard
Q4
Flat-edge
Flush-mount
Brushed finish
Microfoster finish
6)
6)
6)
Design finish
29
On-top and flush-mount range
80
60
- models from 71 to 80 cm width
S4001 bowl - page 39
Tornado - page 63
- models from 51 to 60 cm width
S4001 bowls - page 39
67'
)7
KE - page 50
NEW
NEW
6)
4
)7
Quadra - page 44
S3000 bowl - page 53
NEW
)7
6)
67'
KE - page 50
)7
F2000 - page 71
4
67'
S3000 - page 52
)7
)7
Quadra - pages 44-45
4
Big Bowl - page 60
67'
S1000 - pages 79-80
67'
67'
4
6)
67'
Big Bowl Soft - page 61
67'
< 50
)7
67'
)7
- models below 60 cm width
S4001 bowls - page 40
Quadra - page 45
S3000 bowls - page 53
S1000 - page 80
NEW
)7
6)
)7
67'
)7
)7
67'
NEW
)7
KS - page 58
NEW
)7
30
Circolare-Rondò - pages 76-77
NEW
4
67'
67'
Combinations
Foster is one of the very few companies manufacturing both sinks and hobs. This enables us to pursue a policy of matching
of shape and designs on the horizontal worktop: for kitchens in which every detail counts.
Sinks
the same material (AISI 304) and finish
Big Bowl Soft 86
1v FT
cod. 1061 261
the same dimension
Veronika Soft 5F FT
cod. 7267 032
)7
the same type of edge
the same shape (R 151)
4
Q4
Q4 edge matches perfectly with
induction hobs which feature a 4 mm
glass thickness.
67'
6)
Flat-edge
Standard
Foster range offers countless cooking- The Flat-edge solution is always
washing combinations with standard available in the most prestigious series,
for highly stylish combinations.
8 mm built-in.
31
Complements that make the difference
An allocation of increasingly rich and designed accessories features Foster’s proposals.
All models are accompanied with cutting boards, bowls, dishes holders and colanders that enhance the aesthetics and
functionality of your sink. The full range is presented on the following pages.
32
Modular sets
Sinks
Space and time, more and more valuable items in the kitchen.
For this reason Foster has designed integrated systems of accessories that enhance your every move, and minimize space
when not in use.
The big bowls...with many accessories
Foster range is particularly rich in sinks with large single bowls. From the functional point of view this is in fact the best solution:
a single large basin which can contain dishes and objects of considerable size, equipped with bowls, baskets and chopping
boards which make the working area flexible and perfectly functional. In the picture: N2 chopping board matches with O2 bowl
and T1 dishes holder, to form a complete set of great elegance.
A versatile chopping board
The Twin Hdpe chopping board N3 combines with the new kit P2 to accommodate graters and the containment bowl below.
Other accessories can be inserted in the outer ring of the chopping board, as the dishes holder T2 or the colander Z2.
33
The chopping boards
The wide range of boards includes many proposals in precious woods, highly resistant to wear and absorption of liquids, to
ensure health and long life. Glass and synthetic models, round off Foster’ solutions.
Wood chopping boards
A
B2
B3
C
E
G
Chopping board
34x40 cm
Chopping board
36x40 cm
Chopping board
36x40 cm
Chopping board
34,5x40 cm
Chopping board
29x40 cm
Chopping board
45x40 cm
Chopping board
40x40 cm
8647 000
8654 000
8642 001
8642 002
8653 000
8655 000
8646 000
L2
L3
H
34
B
I
J
K
Σ
Chopping board
37x30 cm
Chopping board
37x46 cm
Round chopping board
Ø40 cm
Iroko chopping board
Twin Chopping board
37x46 cm
Twin chopping board
41x41 cm
Padouk wood Twin chopping board
35,2x45,7 cm
8659 111
8659 112
8651 000
8648 000
8644 003
8644 004
8644 040
M
M2
M3
Sliding chopping board
30x54 cm
Chopping board
28x48 cm
Sliding chopping board
28x48
8643 000
8643 115
8643 116
Glass chopping boards
HDPE chopping boards & kit
L4
L5
N2
N3
P2
Glass chopping board
23x41 cm
Glass chopping board
29x54 cm
HDPE chopping board
27,2x42,5 cm
HDPE Twin
chopping board
31,7x42,5 cm
Grating kit complete
with ring support and
food collection bowl
8631 300
8633 300
8657 001
8644 101
8159 101
Sinks
Baskets, colanders and bowls
Baskets, colanders and bowls. Each Foster sinks can easily be enriched with valuable additions that will help you in all your
work in the kitchen.
Dishes holders and bowls
O
O2
T
T1
T2
U
U2
White bowl
36x30 cm
White bowl
41,4x27,2 cm
St. steel dishes holder
25x35 cm
St. steel dishes holder
25x42,5 cm
St. steel dishes holder
21,4x37,9 cm
St. steel dishes holder
25x45 cm
St. steel dishes holder
23x47 cm
8152 100
8153 100
8100 154
8100 201
8100 303
8100 111
8100 115
β1
W
U
β
Ξ
St. steel bowl holder
37x45 cm
St. steel dishes holder
28x40 cm
St. steel dishes holder
25x43 cm
St. steel dishes holder
St. steel dishes holder
8100 112
8100 280
8100 301
8100 331
8100 040
Baskets for bowls
R
S
S1
α
X
St. steel basket
34x40 cm
St. steel basket
40x40 cm
White basket
40x40 cm
Round White basket
Ø36 cm
St. steel basket
8611 000
8612 000
8612 100
8601 000
8610 000
Colanders
Q
Z
Z2
Y
δ
Δ
White colander
17x32 cm
St. steel colander
25x36 cm
St. steel perforated
pan 21,5x38 cm
St. steel colander
St. steel colander
St. steel colander
8151 100
8154 000
8151 000
8153 000
8153 001
8154 040
35
3
36
How to read the catalogue (sinks chapter)
Features
finish: brushed
dimensions: 1160x500
2b: 400x400+340x400
cut-out: 1140x480
drain: 3½”
Cabinet 90
Version
67'
S T2 β1
For Standard and Flat-edge version only: L5 M
A G L4 N2 N3 O2 P2 R
finish: brushed
dimensions: 1173x513
2b: 400x400+340x400
cut-out: see packaging
drain: 3½”
Technical Drawing
External dimensions refer to
standard version
1312 061 dx
1312 062 sx
finish: brushed
dimensions: 1173x513
2b: 400x400+340x400
cut-out: 1140x480
drain: 3½”
Accessories:
Code
Sinks
Right-hand, left-hand and reversible sinks
The double code for a single model indicates that both
right-hand and left-hand versions are available. The
right-hand version (dx) refers to a sink with the bowl (or
bigger bowl on models without drainer) on the right. Lefthand versions are identified by the code “sx”. The single
code indicates that the sink is reversible, or that only
the version shown in the picture or drawing is available.
Types of installation
Many Foster sinks are available in a variety o versions
(Standard, Flush-mount, Flat-edge and Undermount)
that can have slightly different dimensions. Therefore we
reccomend to check the specifications besides every
version. The built-in type to which figures are referred is
always specified under the drawing.
6)
1318 061 dx
1318 062 sx
)7
1315 061 dx
1315 062 sx
Packing: 1240x560x250 mm 11,5 kg
Accessories
A
Chopping board
34x40
8647 000
G
L4
Chopping board
40x40
8646 000
Glass chopping board
23x41 cm
8631 300
Cabinet
“Cabinet” refers to the smallest standard element of a
modular kitchen in which a sink can be fitted in.
In some cases you may find a double standard:
(ß) for fitting in top at least 40 mm thick, consider the smaller
measure, as indicated in parentheses (e.g. page 43);
(T) for fitting in the beginning/end of composition, consider
the bigger measure, as indicated in parentheses.
For special fittings that require extra adaptations to the
furniture, please refer to the kitchen manufacturer.
Accessories
Always striving to blend aesthetics and functionality,
Foster devotes special attention to its products’
Accessories. This catalogue places special emphasis
on the optional features indicated below each model, to
facilitate identification of the proper combinations.
726
764
Cabinet 80 cm
Mixer tap holes
In the drawings standard tap holes are shown with
continuous line. Further possible holes on request,
in order to install the automatic waste fitting and the
dispenser, are shown with a dashed line. For some
models, customization with additional holes can be done
with some extra costs.
37
S4001
The evolution of S4000 sinks with new bowls with an even tighter radius, enriched by new drain with stainless steel plug and the exclusive perimetric overflow.
Kelvin
(8470 000 - pag. 114)
4)
Camillo
(8467 000 - pag. 116)
suggested mixer taps
Features
Cabinet 80
NEW
AISI 304 brushed
dimensions: 1160x500
1 bowl: 710x400
cut-out: 1140x480
drain: SPACE 3½”
AISI 304 brushed
dimensions: 1173x513
1 bowl: 710x400
cut-out: see page 251
drain: SPACE 3½”
Version
4
Code
4416 061 dx
Technical Drawing
External dimensions refer to
Flush-mount version
4416 062 sx
)7
FT
4417 061 dx
4417 062 sx
Picture shows sx version
Available from September
Accessories:
L4 N2 N3 O2 P2 R T1 T2 Z2
Packing: 1240x570x260 mm 14 kg
For Q4 version only: L5 M
Cabinet 60/(80)T (ref. page 37)
NEW
AISI 304 brushed
dimensions: 970x500
2b: 340x400+170x340
cut-out: 950x480
automatic drain
SPACE 3½”
AISI 304 brushed
dimensions: 983x513
2b: 340x400+170x340
cut-out: see page 251
automatic drain
SPACE 3½”
4
4462 061 dx
External dimensions refer to
Flush-mount version
4462 062 sx
)7
FT
4465 061 dx
4465 062 sx
Picture shows sx version
Available from September
Accessories:
L4 N2 N3 O2 P2 R T1 T2 Z2
For Q4 version only: L5 M
Cabinet 60
Packing: 1050x570x260 mm 12,8 kg
NEW
AISI 304 brushed
dimensions: 860x500
1 bowl: 450x400
cut-out: 840x480
drain: SPACE 3½”
AISI 304 brushed
dimensions: 873x513
1 bowl: 450x400
cut-out: see page 251
drain: SPACE 3½”
4
4483 061 dx
External dimensions refer to
Flush-mount version
4483 062 sx
)7
FT
4486 061 dx
4486 062 sx
Picture shows sx version
Available from September
Accessories:
L4 N2 N3 O2 P2 R T1 T2 Z2
For Q4 version only: L5 M
Standard fittings: fixing brackets, gasket (not available for under-mount sinks), waste fitting, overflow and siphon. Packing: single carton box.
38
Packing: 940x570x260 mm 10,5 kg
S4001
Sinks
R12 sinks range is the new series of flush-mount bowls featuring a particularly tight radius and and valuable fittings such as the stainless steel space-saving drain
and the elegant perimetric overflow.
Tre Alto
(8468 000 - pag. 122)
1/2 Circle
(8480 000 - pag. 120)
suggested mixer taps
Features
NEW
Cabinet 80
AISI 304 brushed
dimensions: 760x450
1 bowl: 710x400
cut-out: see page 251
drain: SPACE 3½”
Version
Code
Technical Drawing
)7
FT
3127 060
Available from September
Accessories:
L3 L4 N2 N3 O2 P2 S
T T1 Z T2 Z2
Packing: 930x520x250 mm 7,8 Kg
Automatic waste fitting: PA (page 106)
NEW
Cabinet 60
AISI 304 brushed
dimensions: 550x450
1 bowl: 500x400
cut-out: see page 251
drain: SPACE 3½”
)7
FT
3125 060
Available from September
Accessories:
L3 L4 N2 N3 O2 P2 S
T T1 Z T2 Z2
Packing: 650x520x250 mm 7,3 Kg
Automatic waste fitting: PA (page 106)
NEW
Cabinet 60
AISI 304 brushed
dimensions: 500x450
1 bowl: 450x400
cut-out: see page 251
drain: SPACE 3½”
)7
FT
3124 060
Available from September
Accessories:
L3 L4 N2 N3 O2 P2 S
T T1 Z T2 Z2
Automatic waste fitting: PA (page 106)
Packing: 550x520x250 mm 5,9 Kg
Standard fittings: fixing brackets, gasket (not available for under-mount sinks), waste fitting, overflow and siphon. Packing: single carton box.
39
S4001
Features
NEW
Cabinet 45
Version
AISI 304 brushed
dimensions: 450x450
1 bowl: 400x400
cut-out: see page 251
drain: SPACE 3½”
Code
Technical Drawing
)7
FT
3126 060
Available from September
Accessories:
L3 L4 N2 N3 O2 P2 PA S
T T1 Z T2 Z2
Packing: 460x520x250 mm 5,6 kg
Automatic waste fitting: PA (page 106)
NEW
Cabinet 40
AISI 304 brushed
dimensions: 390x450
1 bowl: 340x400
cut-out: see page 251
drain: SPACE 3½”
)7
FT
3123 060
Available from September
Accessories: L4 N2 N3 O2 P2 PA R T1 T2 Z2
Automatic waste fitting: PA (page 106)
NEW
Cabinet 30
Packing: 460x520x250 mm 5,3 kg
AISI 304 brushed
dimensions: 220x450
1 bowl: 170x400
cut-out: see page 251
drain: SPACE 3½”
)7
FT
3121 060
Available from September
Automatic waste fitting: PA (page 106)
Standard fittings: fixing brackets, gasket (not available for under-mount sinks), waste fitting, overflow and siphon. Packing: single carton box.
L5 M R T2
Accessories
L3
L4
N2
N3
Twin chopping
board
41x41 cm
8644 004
Glass chopping
board
23x41 cm
8631 300
HDPE chopping
board
27,2x42,5 cm
8657 001
HDPE Twin
chopping board
31,7x42,5 cm
8644 101
O2
P2
White plastic bowl
27,2x41,4 cm
8153 100
Grating kit
complete with
ring support and
food collection tray
8159 101
T
*
St. steel dishes
holder 25x35 cm
8100 154
40
** page 35
**
T1
St. steel dishes
holder 25x42,5 cm
8100 201
PA
S
Automatic waste
fitting SPACE see
page 106
8407 108
Z
*
St. steel colander
25x36 cm
8154 000
St. steel basket
40x40 cm
8612 000
White basket
40x40 cm
8612 100
Z2
**
St. steel perforated
pan 21,5x38 cm
8151 000
*To use only with L3 chopping board **To use only with N3 chopping board
S4000
One of he hallmark of the S4000 sink range is the built-in draining board, an indispensable addition for a functional and clean kitchen.
Sinks
*
Kelvin
(8470 000 - pag. 114)
Camillo
(8467 000 - pag. 116)
suggested mixer taps
Features
Cabinet 80
AISI 304 brushed
dimensions: 1160x500
2 bowls: 340x400
cut-out: 1140x480
drain: Premium 3½”
AISI 304 brushed
dimensions: 1173x513
2 bowls: 340x400
cut-out: see page 251
drain: Premium 3½”
Version
4
Code
4312 061 dx
Technical Drawing
External dimensions refer to
Flush-mount version
4312 062 sx
)7
FT
4315 061 dx
4315 062 sx
Picture shows sx version
Accessories:
L4 N2 N3 O2 P2 R T1 T2 Z2
For Q4 version only: L5 M
Cabinet 60/(80)T (ref. page 37)
Packing: 1240x570x260 mm 14,9 kg
AISI 304 brushed
dimensions: 970x500
2b: 180x400+340x400
cut-out: 950x480
automatic drain
Premium 3½”
AISI 304 brushed
dimensions: 983x513
2b: 180x400+340x400
cut-out: see page 251
automatic drain
Premium 3½”
4
4362 061 dx
External dimensions refer to
Flush-mount version
4362 062 sx
*
Picture shows sx version
)7
FT
4365 061 dx
4365 062 sx
*
Accessories:
L4 N2 N3 O2 P2 R T1 T2 Z2
Third tap hole available
Packing: 1050x570x260 mm 12,9 kg
For Q4 version only: L5 M
Cabinet 90
AISI 304 brushed
dimensions: 860x500
2b: 340x400+400x400
cut-out: 840x480
automatic drain
Premium 3½”
AISI 304 brushed
dimensions: 873x513
2b: 340x400+400x400
cut-out: see page 251
automatic drain
Premium 3½”
4
External dimensions refer to
Flush-mount version
4382 060
*
)7
FT
4385 060
*
Accessories:
L4 N2 N3 O2 P2 R T1 T2 Z2
For Q4 version only: L5 M
Third tap hole available
Packing: 940x570x260 mm 10,9 kg
Standard fittings: fixing brackets, gasket (not available for under-mount sinks), waste fitting, overflow and siphon. Packing: single carton box.
41
S4000
Features
Version
AISI 304 brushed
dimensions: 860x500
1 bowl: 450x400
cut-out: 840x480
drain: Premium 3½”
Cabinet 60
4
Code
Technical Drawing
External dimensions refer to
Flush-mount version
4383 061 dx
4383 062 sx
AISI 304 brushed
dimensions: 873x513
1 bowl: 450x400
cut-out: see page 251
drain: Premium 3½”
)7
FT
4386 061 dx
4386 062 sx
Picture shows sx version
Accessories:
L4 L3 N2 N3 O2 P2 S
T T1 T2 Z Z2
For Q4 version only: L5 M
Packing: 940x570x260 mm 10,5 kg
AISI 304 brushed
dimensions: 860x500
1 bowl: 340x400
cut-out: 840x480
drain: Premium 3½”
Cabinet 45
4
AISI 304 brushed
1 bowl: 340x400
dimensions: 873x513
cut-out: see page 251
drain: Premium 3½”
External dimensions refer to
Flush-mount version
4381 061 dx
4381 062 sx
)7
FT
4384 061 dx
4384 062 sx
Picture shows sx version
Accessories: L4 N2 N3 O2 P2 R T1 T2 Z2
For Q4 version only: L5 M
Packing: 940x570x260 mm 10,2 kg
Standard fittings: fixing brackets, gasket (not available for under-mount sinks), waste fitting, overflow and siphon. Packing: single carton box.
Two sloped "grooves" are carved into the
drainig board. Minimalism and functionality.
L5 R T2
Accessories
L3
L4
Twin chopping
board
41x41 cm
8644 004
Glass chopping
board
23x41 cm
8631 300
N2
Sliding
chopping board
30x54
8643 000
N3
O2
P2
HDPE Twin
chopping board
31,7x42,5 cm
8644 101
White plastic bowl
27,2x41,4 cm
8153 100
Grating kit
complete with
ring support and
food collection tray
8159 101
T
*
St. steel dishes
holder 25x35 cm
8100 154
42
M
T1
St. steel dishes
holder 25x42,5 cm
8100 201
Z
** pages 34-35
**
*
St. steel colander
25x36 cm
8154 000
HDPE chopping
board
27,2x42,5 cm
8657 001
S
St. steel basket
40x40 cm
8612 000
White basket
40x40 cm
8612 100
Z2
**
St. steel perforated
pan 21,5x38 cm
8151 000
*To use only with L3 chopping board **To use only with N3 chopping board
Quadra
The Quadra washing solutions are perfectly in tune with the minimalist trends sweeping through the interior design world. Pure squared lines coupled with the
sophisticated finishes of the Foster steels are the ingredients of the wide range of sinks and bowls, which can be fitted overmount (flat-edge and Q4-edge),
flush-mount and undermount.
R.0
R9
Sinks
The corners at the bottom of the bowls are now
rounded to make them easier to clean while the
vertical ones, strictly “curve-less”, are due to
the original, plan and sober concept.
Tre Alto
(8468 000 - pag. 122)
1/2 Circle
(8480 000 - pag. 120)
suggested mixer taps
Features
AISI 304 brushed
dimensions: 1079x479
1 bowl: 470x400
cut-out: 1059x459
drain: 3½”
Cabinet (60)ß/120 (ref. page 37)
AISI 304 brushed
dimensions: 1064x464
1 bowl: 470x400
cut-out: see page 251
drain: 3½”
Version
Code
Technical Drawing
External dimensions refer to
Flat-edge version
6)
1211 090
)7
FT
1210 090
Accessories:
T T1 T2 Z Z2
Cabinet (60)ß/90 (ref. page 37)
Packing: 1140x540x290 mm 13,2 kg
AISI 304 brushed
dimensions: 1000x510
cut-out: 980x495
drain: automatic 3½”
finitura: spazzolato
dimensions: 985x503
cut-out: see page 251
drain: automatic 3½”
6)
1213 091 dx
External dimensions refer to
Flat-edge version
8
L3 L4 N2 N3 O2 P2 S
Automatic waste fitting: PR PQ PC (page 107)
1213 092 sx
)7
FT
1223 091 dx
1223 092 sx
Picture shows dx version
Accessories:
L3 L4 N2 N3 O2 P2 S
T T1 T2 Z Z2
Cabinet (80)ß/120 (ref. page 37)
NEW
Packing: 1080x570x290 mm 13,2 kg
AISI 304 brushed
dimensions: 1000x440
1 bowl: 675x400
cut-out: see page 251
drain: 3½”
)7
FT
1220 090
Accessories:
L3 L4 N2 N3 O2 P2 S
T T1 T2 Z Z2
Automatic waste fitting: PA (page 106)
Packing: 1140x540x290 mm 13,5 Kg
Standard fittings: fixing brackets, gasket (not available for under-mount sinks), waste fitting, overflow and siphon. Packing: single carton box.
43
Quadra
Features
AISI 304 brushed
dimensions: 864x464
1 bowl: 800x400
cut-out: see page 251
drain: 3½”
Cabinet 90
Version
Code
Technical Drawing
)7
FT
1218 090
Accessories:
L3 L4 N2 N3 O2 P2 S
T T1 T2 Z Z2
Packing: 930x540x290 mm 11 kg
Automatic waste fitting: PR PQ PC (page 107)
AISI 304 brushed
dimensions: 840x510
1 bowl: 761x400
cut-out: 820x495
drain: automatic 3½”
Cabinet 90
AISI 304 brushed
dimensions: 825x503
1 bowl: 761x400
cut-out: see page 251
drain: automatic 3½”
External dimensions refer to
Flat-edge version
6)
1219 090
)7
FT
1229 090
Accessories:
L3 L4 N2 N3 O2 P2 S
T T1 T2 Z Z2
Packing: 1060x580x290 mm 10,8 kg
AISI 304 brushed
bowl: 71x40 cm
dimensions: 839x479
cut-out: 819x459
drain: automatic 3½”
Cabinet 90
6)
1250 090
Accessories:
L3 L4 N2 N3 O2 P2 S
T T1 T2 Z Z2
Packing: 930x600x300 mm 11 kg
AISI 304 brushed
dimensions: 804x510
2 bowls: 340x400
cut-out: 784x495
drain: 3½”
Cabinet 90
AISI 304 brushed
dimensions: 789x503
2 bowls: 340x400
cut-out: see page 251
drain: 3½”
External dimensions refer to
Flat-edge version
6)
1209 090
)7
FT
1208 090
Accessories: L4 N2 N3 O2 P2 R T1 T2 Z2
Packing: 950x540x290 mm 10,9 kg
Cabinet (45)ß/60 (ref. page 37)
AISI 304 brushed
dimensions: 600x520
1 bowl: 270x400
cut-out: 580x500
drain: automatic 3½”
4
1246 091 dx
1246 092 sx
Picture shows sx version
Accessories: L4 N2 O2 T1
Packing: 650x570x290 mm 8 kg
Standard fittings: fixing brackets, gasket (not available for under-mount sinks), waste fitting, overflow and siphon. Packing: single carton box.
44
Quadra
Features
AISI 304 brushed
dimensions: 560x520
1 bowl: 500x400
cut-out: 540x500
drain: automatic 3½”
Cabinet 60
Code
Technical Drawing
External dimensions refer to
Q4 version
4
6)
1243 090
1216 090
Sinks
AISI 304 brushed
dimensions: 579x510
1 bowl: 500x400
cut-out: 559x495
drain: automatic 3½”
Version
Accessories:
L3 L4 N2 N3 O2 P2 S
T T1 T2 Z Z2
Packing: 620x540x290 mm 7 kg
AISI 304 brushed
dimensions: 564x464
1 bowl: 500x400
cut-out: see page 251
drain: 3½”
Cabinet 60
)7
FT
1215 090
Accessories:
L3 L4 N2 N3 O2 P2 S
T T1 T2 Z Z2
Packing: 610x540x290 mm 6,6 kg
Automatic waste fitting: PR PQ PC (page 107)
AISI 304 brushed
dimensions: 479x510
1 bowl: 400x400
cut-out: 459x495
drain: automatic 3½”
Cabinet 45
6)
1205 090
Accessories:
L3 L4 N2 N3 O2 P2 S
T T1 T2 Z Z2
Packing: 560x540x290 mm 6 kg
AISI 304 brushed
dimensions: 464x464
1 bowl: 400x400
cut-out: see page 251
drain: 3½”
Cabinet 45
)7
FT
1214 090
Accessories:
L3 L4 N2 N3 O2 P2 S
T T1 T2 Z Z2
Packing: 560x540x290 mm 6 kg
Automatic waste fitting: PR PQ PC (page 107)
Cabinet 40
AISI 304 brushed
dimensions: 400x520
1 bowl: 340x400
cut-out: 380x500
drain: automatic 3½”
4
1241 090
Accessories: L4 N2 N3 O2 P2 T1 T2 Z2
Packing: 640x560x290 mm 5,5 kg
Standard fittings: fixing brackets, gasket (not available for under-mount sinks), waste fitting, overflow and siphon. Packing: single carton box.
45
Quadra 7"
Features
Version
AISI 304 brushed
dimensions: 864x464
1 bowl: 800x400
cut-out: see page 251
drain hole: 7"
Cabinet 90
Accessories: L3 L4 N2 O2 S
Code
Technical Drawing
)7
FT
1218 097
T T1 Z
Available also in undermount version, see page 90
Packing: 930x540x290 mm 11 kg
Standard fittings: fixing brackets, gasket (not available for under-mount sinks), waste fitting, overflow and siphon. Packing: single carton box.
The 7" waste fitting features a bigger dimension
than standard ones. The drain offers a large
and deep basket for food waste collection.
Accessories
L3
L4
Twin chopping
board
41x41 cm
8644 004
Glass chopping
board
23x41 cm
8631 300
N2
N3
O2
HDPE chopping
board
27,2x42,5 cm
8657 001
HDPE Twin
chopping board
31,7x42,5 cm
8644 101
White plastic bowl
27,2x41,4 cm
8153 100
P2
**
Grating kit
complete with
ring support and
food collection tray
8159 101
46
R
S
St. steel basket
34x40 cm
8611 000
T1
T2
St. steel dishes
holder 25x42,5 cm
8100 201
St. steel dishes
holder
21,4x37,9 cm
8100 303
**
T
St. steel basket
40x40 cm
8612 000
White basket
40x40 cm
8612 100
Z
*
St. steel colander
25x36 cm
8154 000
*
St. steel dishes
holder 25x35 cm
8100 154
Z2
**
St. steel perforated
pan 21,5x38 cm
8151 000
*To use only with L3 chopping board **To use only with N3 chopping board
Quadra S
That something more in the Quadra series: a successful draining board. Quadra S resembles the two top-of-the-range series of the Foster collection.
R.0
R9
Tre Alto
(8468 000 - pag. 122)
Sinks
In Quadra S sinks the corners at the bottom
of the bowls are now rounded to make them
easier to clean while the vertical ones, strictly
“curve-less”, are due to the original, plan and
sober concept.
NYC
(8486 000 - pag. 125)
suggested mixer taps
Features
Cabinet 60/(80)T (ref. page 37)
AISI 304 brushed
dimensions: 983x513
2b: 180x340+340x400
cut-out: 950x480
drain: automatic 3½”
AISI 304 brushed
dimensions: 983x513
2b: 180x340+340x400
cut-out: see page 251
drain: automatic 3½”
Version
6)
Code
5362 061 dx
External dimensions refer to
Flat-edge version
5362 062 sx
)7
FT
5365 061 dx
5365 062 sx
Picture shows sx version
Accessories:
Third tap hole available
L4 N2 N3 O2 P2 R T1 T2 Z2
For Flat-edge version only: L5 M
Cabinet 60/(80)T (ref. page 37)
Technical Drawing
Packing: 1070x570x260 mm 11,8 kg
AISI 304 brushed
dimensions: 983x513
1 bowl: 500x400
cut-out: 950x480
drain: automatic 3½”
AISI 304 brushed
dimensions: 983x513
1 bowl: 500x400
cut-out: see page 251
drain: automatic 3½”
6)
5361 061 dx
External dimensions refer to
Flat-edge version
5361 062 sx
)7
FT
5364 061 dx
5364 062 sx
Picture shows sx version
Accessories:
L3 L4 N2 N3 O2 P2 S
T T1 T2 Z Z2
Packing: 1070x570x260 mm 11,5 kg
For Flat-edge version only: L5 M
Cabinet 45
AISI 304 brushed
dimensions: 873x513
1 bowl: 340x400
cut-out: 840x480
drain: 3½”
AISI 304 brushed
dimensions: 873x513
1 bowl: 340x400
cut-out: see page 251
drain: 3½”
6)
5381 061 dx
External dimensions refer to
Flat-edge version
5381 062 sx
)7
FT
5384 061 dx
5384 062 sx
Picture shows sx version
Accessories: L4 N2 N3 O2 P2 R T1 T2 Z2
For Flat-edge version only: M
Automatic waste fitting: PR PQ PC (page 107)
Second tap hole available
Packing: 940x570x260 mm 9 kg
Standard fittings: fixing brackets, gasket (not available for under-mount sinks), waste fitting, overflow and siphon. Packing: single carton box.
47
KE
KE sinks feature clear-cut, distinctive designs: a handy raised-edge drainer and large, spacious bowls (200 mm) edged with an inclined drip-guard that prevents
over-spill.
Tre Alto
(8468 000 - pag. 122)
22)
Play
(8487 000 - pag. 119)
suggested mixer taps
Features
AISI 304 brushed
dimensions: 1173x513
1 bowl: 710x400
cut-out: 1140x480
drain: 3½”
Cabinet 90
Version
6)
Code
Technical Drawing
2211 061 dx
2211 062 sx
Picture shows sx version
Accessories: L3 L4 L5 M N2 N3 O2 P2 S
T
Second tap hole available
T1 T2 Z Z2
Packing: 1200x520x250 mm 11 kg
Automatic waste fitting: PR PQ PC (page 107)
AISI 304 brushed
dimensions: 983x513
1 bowl: 500x400
cut-out: 950x480
drain: 3½”
Cabinet 80
6)
2263 061 dx
2263 062 sx
Picture shows sx version
983
Accessories: L3 L4 L5 M N2 N3 O2 P2 S
T
Second tap hole available
T1 T2 Z Z2
Packing: 1070x570x250 mm 10,5 kg
Automatic waste fitting: PR PQ PC (page 107)
Cabinet 60/(80)T (ref. page 37)
AISI 304 brushed
dimensions: 983x513
2b: 180x340+340x400
cut-out: 950x480
drain: 3½”
6)
2297 061 dx
2297 062 sx
Picture shows sx version
Accessories:
L4 L5 M N2 N3 O2 P2 R T1 T2 Z2
Automatic waste fitting: PR PQ PC (page 107)
Standard fittings: fixing brackets, gasket (not available for under-mount sinks), waste fitting, overflow and siphon. Packing: single carton box.
48
Second tap hole available
Packing: 1070x570x260 mm 10,5 kg
KE
Features
AISI 304 brushed
dimensions: 873x513
1 bowl: 710x400
cut-out: 840x480
drain: 3½”
Code
Technical Drawing
6)
2287 060
Sinks
Cabinet 80
Version
Accessories:
L4 L5 M N2 N3 O2 P2 S T1 T2 Z2
Cabinet 80
Packing: 940x570x260 mm 10,8 kg
NEW
AISI 304 brushed
dimensions: 873x513
2b: 340x400
cut-out: 840x480
drain: 3½”
6)
2283 060
Accessories:
L4 L5 M N2 N3 O2 P2 R T1 T2 Z2
Automatic waste fitting: PR PQ PC (page 107)
Cabinet 60
Packing: 940x570x260 mm 10 kg
NEW
AISI 304 brushed
dimensions: 873x513
1 bowl: 450x400
cut-out: 840x480
drain: 3½”
6)
2280 061 dx
2280 062 sx
Picture shows sx version
Accessories: L3 L4 L5 M N2 N3 O2 P2 S
T
T1 T2 Z Z2
Cabinet 45
Packing: 940x560x250 mm 9 Kg
AISI 304 brushed
dimensions: 873x513
1 bowl: 340x400
cut-out: 840x480
drain: 3½”
6)
2281 061 dx
2281 062 sx
Picture shows sx version
Accessories:
L4 L5 M N2 N3 O2 P2 R T1 T2 Z2
Automatic waste fitting: PR PQ PC (page 107)
Second tap hole available
Packing: 940x560x250 mm 8,2 kg
Standard fittings: fixing brackets, gasket (not available for under-mount sinks), waste fitting, overflow and siphon. Packing: single carton box.
KE Series also includes elegant gas cooker
hobs and a new collection of multifunction and
pyrolytic ovens. In the picture: the matching
with the original version of the hob with white
grids.
49
KE
Features
Version
AISI 304 brushed
1 bowl: 710x400
dimensions: 770x520
cut-out: 750x500
drain: automatic 3½”
Cabinet 80
Accessories:
L3 L4 N2 N3 O2 P2 S
4
Code
Technical Drawing
2278 060
T T1 T2 Z Z2
Packing: 770x540x290 mm 8 kg
AISI 304 brushed
1 bowl: 450x400
dimensions: 510x520
cut-out: 490x500
drain: automatic 3½”
Cabinet 60
Accessories:
L3 L4 N2 N3 O2 P2 S
4
2274 060
T T1 T2 Z Z2
Packing: 600x540x290 mm 6 kg
Standard fittings: fixing brackets, gasket (not available for under-mount sinks), waste fitting, overflow and siphon. Packing: single carton box.
Q4 versions of KE sinks match perfectly with
the S4000 Domino cooking solutions.
R
Accessories
L3
L4
L5
Twin chopping
board
41x41 cm
8644 004
Glass chopping
board
23x41 cm
8631 300
Glass chopping
board
29x54 cm
8633 300
* Z2 ** page 35
M
Sliding
chopping board
30x54
8643 000
N2
N3
O2
P2
HDPE chopping
board
27,2x42,5 cm
8657 001
HDPE Twin
chopping board
31,7x42,5 cm
8644 101
White plastic bowl
27,2x41,4 cm
8153 100
Grating kit
complete with
ring support and
food collection tray
8159 101
S
St. steel basket
40x40 cm
8612 000
White basket
40x40 cm
8612 100
50
T
T1
T2
St. steel dishes
holder 25x42,5 cm
8100 201
St. steel dishes
holder
21,4x37,9 cm
8100 303
**
Z
**
*
St. steel colander
25x36 cm
8154 000
*To use only with L3 chopping board **To use only with N3 chopping board
S3000
Sinks
A successful collection thanks to its sober elegance. The wide range of available versions - that vary in terms of size and type of installation - makes the S3000 an
evergreen series that can be combined with all Foster cooker hobs.
Flexo
(8456 000 - pag. 117)
Tre basso
(8457 000 - pag. 122)
suggested mixer taps
Features
AISI 304 brushed
dimensions: 1160x500
2b: 400x400+340x400
cut-out: 1140x480
drain: 3½”
Cabinet 90
AISI 304 brushed
dimensions: 1173x513
2b: 400x400+340x400
cut-out: 1140x480
drain: 3½”
Version
67'
Code
1312 061 dx
Technical Drawing
External dimensions refer to
standard version
1312 062 sx
6)
1318 061 dx
1318 062 sx
Picture shows dx version
Accessories:
A G L4 N2 N3 O2 P2 R
S T2 β1
For Standard and Flat-edge version only: L5 M
Cabinet 60/(80)T (ref. page 37)
Picture shows dx version
Accessories:
A L4 N2 N3 O2 P2 Q R T2 β1
For Standard and Flat-edge version only: L5 M
Automatic waste fitting: PR PQ PC (page 107)
Cabinet 90
AISI 304 brushed
dimensions: 1173x513
2b: 400x400+340x400
cut-out: see page 251
drain: 3½”
AISI 304 brushed
dimensions: 970x500
2b: 340x400+150x300
cut-out: 950x480
drain: 3½”
AISI 304 brushed
dimensions: 983x513
2b: 340x400+150x300
cut-out: 950x480
drain: 3½”
AISI 304 brushed
dimensions: 983x513
2b: 340x400+150x300
cut-out: see page 251
drain: 3½”
AISI 304 brushed
dimensions: 860x500
2b: 400x400+340x400
cut-out: 840x480
drain: 3½”
AISI 304 brushed
dimensions: 873x513
2b: 400x400+340x400
cut-out: 840x480
drain: 3½”
Accessories:
S T2 β1
For Standard and Flat-edge version only: L5 M
Automatic waste fitting: PR PQ PC (page 107)
A G L4 N2 N3 O2 P2 R
AISI 304 brushed
dimensions: 873x513
2b: 400x400+340x400
cut-out: see page 251
drain: 3½”
)7
FT
1315 061 dx
1315 062 sx
Packing: 1240x560x250 mm 11,5 kg
67'
1363 061 dx
External dimensions refer to
standard version
1363 062 sx
6)
1369 061 dx
1369 062 sx
)7
FT
1366 061 dx
1366 062 sx
Second and third tap hole available
Packing: 1070x570x250 mm 9,4 kg
External dimensions refer to
standard version
67'
1382 062 sx
6)
1388 062 sx
)7
FT
1385 062 sx
Packing: 940x560x250 mm 10 kg
Standard fittings: fixing brackets, gasket (not available for under-mount sinks), waste fitting, overflow and siphon. Packing: single carton box.
51
S3000
Features
Cabinet 60
AISI 304 brushed
dimensions: 860x500
1 bowl: 400x400
cut-out: 840x480
drain: 3½”
AISI 304 brushed
dimensions: 873x513
1 bowl: 400x400
cut-out: 840x480
drain: 3½”
Version
67'
Code
1381 061 dx
Technical Drawing
External dimensions refer to
standard version
1381 062 sx
6)
1387 061 dx
1387 062 sx
Picture shows sx version
Accessories: G L4 N2 N3 O2 P2 S T2 β1
For Standard and Flat-edge version only: L5 M
Automatic waste fitting: PR PQ PC (page 107)
Cabinet 80
AISI 304 brushed
dimensions: 873x513
1 bowl: 400x400
cut-out: see page 251
drain: 3½”
AISI 304 brushed
dimensions: 790x500
2 bowls: 340x400
cut-out: 770x480
drain: 3½”
)7
FT
1384 061 dx
1384 062 sx
Second tap hole available
Packing: 940x570x260 mm 8,5 kg
67'
1372 060
Accessories:
A L4 L5 M N2 N3 O2 P2 R T2 β1
Packing: 850x560x250 mm 8,4 kg
The artful combination of straight lines
(draining board) and curved lines (the wideradius bowls) creates an ideal match with
either squared or curved-rod mixer taps.
52
S3000
Features
Version
AISI 304 brushed
dimensions: 554x454
1 bowl: 503x400
cut-out: see page 251
drain: 3½”
Cabinet 60
)7
FT
Code
Technical Drawing
External dimensions refer to
Flush-mount version
1116 061 dx
1116 062 sx
Sinks
Picture shows dx version
Accessories: L4 N2 N3 O2 P2 S T2
Automatic waste fitting: PR PQ PC (page 107)
Packing: 630x530x280 mm 6,6 kg
AISI 304 brushed
dimensions: 454x454
1 bowl: 400x400
cut-out: see page 251
drain: 3½”
Cabinet 45
)7
FT
External dimensions refer to
Flush-mount version
1114 061 dx
1114 062 sx
Picture shows dx version
Accessories: L4 N2 N3 O2 P2 S T2
Packing: 550x540x280 mm 5,8 kg
Automatic waste fitting: PR PQ PC (page 107)
AISI 304 brushed
dimensions: 394x454
1 bowl: 340x400
cut-out: see page 251
drain: 3½”
Cabinet 40
)7
FT
External dimensions refer to
Flush-mount version
1117 061 dx
1117 062 sx
Picture shows dx version
Accessories: L4 N2 N3 O2 P2 R T2
Packing: 530x470x280 mm 5 kg
Automatic waste fitting: PR PQ PC (page 107)
Standard fittings: fixing brackets, gasket (not available for under-mount sinks), waste fitting, overflow and siphon. Packing: single carton box.
Per versione dx/sx si intende vasca con scarico a destra/sinistra
Accessories
L5 R pages 34-35
A
Chopping board
34x40
8647 000
L4
Glass chopping
board
23x41 cm
8631 300
G
M
Chopping board
40x40
8646 000
Sliding
chopping board
30x54
8643 000
N2
N3
O2
P2
HDPE chopping
board
27,2x42,5 cm
8657 001
HDPE Twin
chopping board
31,7x42,5 cm
8644 101
White plastic bowl
27,2x41,4 cm
8153 100
Grating kit
complete with
ring support and
food collection tray
8159 101
Q
White colander
17x32 cm
8151 100
S
St. steel basket
40x40 cm
8612 000
White basket
40x40 cm
8612 100
T2
**
St. steel dishes
holder
21,4x37,9 cm
8100 303
**
β1
St. steel dishes
holder 25x43 cm
8100 301
*To use only with L3 chopping board **To use only with N3 chopping board
53
FM
A new range of sinks of pure and essential design. The great skill of Foster in stainless steel processing allows to combine both tight radius and deep bowls,
typical of the best welded sinks, and the sturdyness of the seamless solutions.
Lorenzo
(8466 000 - pag. 126)
NYC
(8486 000 - pag. 125)
suggested mixer taps
Features
Cabinet 90
NEW
AISI 304 brushed
dimensions: 1160x500
2 bowls: 362,5x400
cut-out: 1140x480
drain: 3½”
AISI 304 microfoster
dimensions: 1160x500
2 bowls: 362,5x400
cut-out: 1140x480
drain: 3½”
Picture shows sx version
AISI 304 design
dimensions: 1160x500
2 bowls: 362,5x400
cut-out: 1140x480
drain: 3½”
Accessories: B L4 M N2 R β1
Automatic waste fitting: PR PQ PC (page 107)
Cabinet 60/(80)T (ref. page 37)
NEW
AISI 304 brushed
dimensions: 970x500
2b: 362,5x400+150x300
cut-out: 950x480
drain: 3½”
AISI 304 microfoster
dimensions: 970x500
2b: 362,5x400+150x300
cut-out: 950x480
drain: 3½”
AISI 304 design
dimensions: 970x500
2b: 362,5x400+150x300
cut-out: 950x480
drain: 3½”
Picture shows sx version
Accessories: B M N2 Q R β1
Automatic waste fitting: PR PQ PC (page 107)
Cabinet 90
NEW
AISI 304 brushed
dimensions: 860x500
2 bowls: 362,5x400
cut-out: 840x480
drain: 3½”
AISI 304 microfoster
dimensions: 860x500
2 bowls: 362,5x400
cut-out: 840x480
drain: 3½”
Availability: September 2012
Accessories: B L4 M N2 R β1
AISI 304 design
dimensions: 860x500
2 bowls: 362,5x400
cut-out: 840x480
drain: 3½”
Version
67'
Code
Technical Drawing
1972 061 dx
1972 062 sx
67'
1972 461 dx
microfoster
1972 462 sx
67'
1972 761 dx
design
67'
1972 762 sx
Second tap hole available
Packing: 1180x510x190 mm 7 kg
1973 061 dx
1973 062 sx
67'
1973 461 dx
microfoster
1973 462 sx
67'
1973 761 dx
design
1973 762 sx
Second and third tap hole available
Packing: 1180x520x190 mm 6,9 kg
67'
1974 060
67'
1974 460
microfoster
67'
1974 760
design
Packing: 900x520x190 mm 6 kg
Standard fittings: fixing brackets, gasket (not available for under-mount sinks), waste fitting, overflow and siphon. Packing: single carton box.
54
FM
NEW
Cabinet 45
AISI 304 brushed
dimensions: 860x500
1 bowl: 362,5x400
cut-out: 840x480
drain: 3½”
AISI 304 microfoster
dimensions: 860x500
1 bowl: 362,5x400
cut-out: 840x480
drain: 3½”
Picture shows sx version
Accessories: B L4 M N2 R β1
Automatic waste fitting: PR PQ PC (page 107)
Version
AISI 304 design
dimensions: 860x500
1 bowl: 362,5x400
cut-out: 840x480
drain: 3½”
67'
Code
Technical Drawing
1971 061 dx
1971 062 sx
67'
1971 461 dx
microfoster
1971 462 sx
Sinks
Features
67'
1971 761 dx
design
Second tap hole available
1971 762 sx
Packing: 900x520x190 mm 5,1 kg
Standard fittings: fixing brackets, gasket (not available for under-mount sinks), waste fitting, overflow and siphon. Packing: single carton box.
19 cm deep and capacious bowls, inserted
in a generous safe-drop profile, for this sturdy
and practical sink.
Accessories
B
Chopping board
36x40
8654 000
N2
HDPE chopping
board
27,2x42,5 cm
8657 001
L4
Glass chopping
board
23x41 cm
8631 300
Q
White colander
17x32 cm
8151 100
M
Sliding
chopping board
30x54
8643 000
R
St. steel basket
34x40 cm
8611 000
β1
St. steel dishes
holder 25x43 cm
8100 301
55
KS
KS sinks feature clear-cut, distinctive designs: a handy raised-edge drainer and large, spacious basins edged with an inclined drip-guard that prevents over-spill.
Lorenzo
(8466 000 - pag. 126)
NYC
(8486 000 - pag. 125)
suggested mixer taps
Features
AISI 304 brushed
dimensions: 1160x500
2 bowls: 340x400
cut-out: 1140x480
drain: 3½”
Cabinet 80
AISI 304 microfoster
dimensions: 1160x500
2 bowls: 340x400
cut-out: 1140x480
drain: 3½”
Version
67'
Code
Technical Drawing
2112 061 dx
2112 062 sx
67'
2112 461 dx
microfoster
2112 462 sx
Picture shows dx version
Accessories:
A L4 L5 M N2 N3 O2 P2 R T2 β1
Packing: 1200x520x250 mm 8,2 kg
AISI 304 brushed
dimensions: 970x500
2 bowls: 340x400
1 bowl: 150x300
cut-out: 950x480
drain: 3½”
AISI 304 microfoster
dimensions: 970x500
2 bowls: 340x400
1 bowl: 150x300
cut-out: 950x480
drain: 3½”
Cabinet 100
67'
2173 060
67'
2173 460
microfoster
Accessories:
A L4 L5 M N2 N3 O2 P2 Q R T2 β1
Packing: 1070x570x250 mm 10,2 kg
AISI 304 brushed
dimensions: 970x500
2b: 340x400+150x300
cut-out: 950x480
drain: 3½”
Cabinet 60/(80)T (ref. page 37)
AISI 304 microfoster
dimensions: 970x500
2b: 340x400+150x300
cut-out: 950x480
drain: 3½”
67'
2163 061 dx
2163 062 sx
67'
2163 461 dx
microfoster
2163 462 sx
Picture shows dx version
Accessories:
A L4 L5 M N2 N3 O2 P2 Q R T2 β1
Automatic waste fitting: PR PQ PC (page 107)
Second and third tap hole available
Packing: 1070x570x250 mm 8 kg
Standard fittings: fixing brackets, gasket (not available for under-mount sinks), waste fitting, overflow and siphon. Packing: single carton box.
56
KS
Features
Version
AISI 304 brushed
dimensions: 860x500
2 bowls: 340x400
cut-out: 840x480
drain: 3½”
Cabinet 80/(90)T (ref. page 37)
Technical Drawing
2182 060
67'
2182 460
microfoster
Sinks
AISI 304 microfoster
dimensions: 860x500
2 bowls: 340x400
cut-out: 840x480
drain: 3½”
67'
Code
Accessories:
A L4 L5 M N2 N3 O2 P2 R T2 β1
Packing: 940x560x250 mm 7,4 kg
NEW
Cabinet 60
AISI 304 brushed
dimensions: 860x500
1 bowl: 450x400
cut-out: 840x480
drain: 3½”
67'
2180 061 dx
2180 062 sx
Picture shows dx version
Accessories:
A L4 L5 M N2 N3 O2 P2 R T2 β1
Packing: 940x560x250 mm 7,4 kg
Standard fittings: fixing brackets, gasket (not available for under-mount sinks), waste fitting, overflow and siphon. Packing: single carton box.
A large bowl (45x40 cm) with drainer. An
ideal solution for a small space, practical for
washing of big dishes.
This solution is already offered in many Foster
series and is now available also for KE and
KS sinks.
Accessories
A
Chopping board
34x40
8647 000
L4
L5
Glass chopping
board
23x41 cm
8631 300
Glass chopping
board
29x54 cm
8633 300
M
Sliding
chopping board
30x54
8643 000
N2
N3
O2
P2
HDPE chopping
board
27,2x42,5 cm
8657 001
HDPE Twin
chopping board
31,7x42,5 cm
8644 101
White plastic bowl
27,2x41,4 cm
8153 100
Grating kit
complete with
ring support and
food collection tray
8159 101
Q
White colander
17x32 cm
8151 100
R
St. steel basket
34x40 cm
8611 000
T2
**
St. steel dishes
holder
21,4x37,9 cm
8100 303
**
β1
St. steel dishes
holder 25x43 cm
8100 301
**To use only with N3 chopping board
57
KS
Features
Version
AISI 304 brushed
dimensions: 860x500
1 bowl: 340x400
cut-out: 840x480
drain: 3½”
Cabinet 45
AISI 304 microfoster
dimensions: 860x500
1 bowl: 340x400
cut-out: 840x480
drain: 3½”
67'
Code
Technical Drawing
2181 061 dx
2181 062 sx
67'
2181 461 dx
microfoster
2181 462 sx
Picture shows dx version
Accessories:
A L4 L5 M N2 N3 O2 P2 R T2 β1
Second tap hole available
Automatic waste fitting: PR PQ PC (page 107)
Packing: 940x560x250 mm 6,5 kg
NEW
Cabinet 30
AISI 304 brushed
dimensions: 290x500
1 bowl: 180x340
cut-out: 270x480
drain: 3½”
67'
2129 060
Packing: 460x460x250 mm 2,8 kg
Standard fittings: fixing brackets, gasket (not available for under-mount sinks), waste fitting, overflow and siphon. Packing: single carton box.
SinK code 2129 060 completes KS Domino
cooking solutions (see page 164)
Accessories
A
Chopping board
34x40
8647 000
L5
Glass chopping
board
29x54 cm
8633 300
M
Sliding
chopping board
30x54
8643 000
N2
N3
O2
P2
HDPE chopping
board
27,2x42,5 cm
8657 001
HDPE Twin
chopping board
31,7x42,5 cm
8644 101
White plastic bowl
27,2x41,4 cm
8153 100
Grating kit
complete with
ring support and
food collection tray
8159 101
Q
White colander
17x32 cm
8151 100
58
L4
Glass chopping
board
23x41 cm
8631 300
R
St. steel basket
34x40 cm
8611 000
T2
**
St. steel dishes
holder
21,4x37,9 cm
8100 303
**
β1
St. steel dishes
holder 25x43 cm
8100 301
**To use only with N3 chopping board
Big Bowl
Sinks
Foster’s strength: the construction of a “single moulded” sink that competes with the design, quality and sturdiness of welded products. The choice is up to you.
Spring
(8472 000 - pag. 117)
Luisa
(8482 000 - pag. 124)
suggested mixer taps
Features
Cabinet 90
AISI 304 brushed
dimensions: 1160x500
2b: 450x400+275x400
cut-out: 1140x480
drain: 3½”
AISI 304 microfoster
dimensions: 1160x500
2b: 450x400+275x400
cut-out: 1140x480
drain: 3½”
Picture shows dx version
E L4 M N2 S β β1
Automatic waste fitting: PR PQ PC (page 107)
Accessories: C
Cabinet 60
AISI 304 brushed
dimensions: 1173x513
2b: 450x400+275x400
cut-out: 1140x480
drain: 3½”
AISI 304 brushed
dimensions: 1160x500
1 bowl: 450x400
cut-out: 1140x480
drain: 3½”
the overflow is outside
the bowl
Version
67'
Code
1512 201 dx
Technical Drawing
External dimensions refer to
standard version
1512 202 sx
67'
1512 401 dx
microfoster
6)
1512 402 sx
1076 061 dx
1076 062 sx
Second and third tap hole available
Packing: 1240x560x250 mm 7,6 kg
67'
1513 201 dx
1513 202 sx
Picture shows dx version
Second tap hole available
Accessories: E L4 M N2 S β1
Packing: 1240x570x260 mm 7,2 kg
Automatic waste fitting: PR PQ PC (page 107)
Cabinet 90
AISI 304 brushed
dimensions: 860x500
2b: 450x400+275x400
cut-out: 840x480
drain: 3½”
AISI 304 brushed
dimensions: 873x513
2b: 450x400+275x400
cut-out: 840x480
drain: 3½”
67'
1562 001 dx
External dimensions refer to
standard version
1562 002 sx
6)
1072 061 dx
1072 062 sx
Picture shows sx version
E L4 M N2 S β β1
Automatic waste fitting: PR PQ PC (page 107)
Accessories: C
Second tap hole available
Packing: 940x570x260 mm 6,8 kg
Standard fittings: fixing brackets, gasket (not available for under-mount sinks), waste fitting, overflow and siphon. Packing: single carton box.
59
Big Bowl
Cabinet 60
Features
AISI 304 brushed
dimensions: 860x500
1 bowl: 450x400
cut-out: 840x480
drain: 3½”
AISI 304 microfoster
dimensions: 860x500
1 bowl: 450x400
cut-out: 840x480
drain: 3½”
Picture shows dx version
Accessories: E L4 M N2 S β1
Automatic waste fitting: PR PQ PC (page 107)
Cabinet 60
AISI 304 brushed
dimensions: 873x513
1 bowl: 450x400
cut-out: 840x480
drain: 3½”
AISI 304 brushed
dimensions: 860x500
2b: 275x400+150x300
cut-out: 840x480
drain: 3½”
Version
67'
Code
1561 201 dx
Technical Drawing
External dimensions refer to
standard version
1561 202 sx
67'
1561 401 dx
microfoster
6)
1561 402 sx
1071 061 dx
1071 062 sx
Second tap hole available
Packing: 940x570x260 mm 6 kg
67'
1361 261 dx
1361 262 sx
Picture shows dx version
Accessories: C Q β β1
Second tap hole available
Automatic waste fitting: PR PQ PC (page 107)
Cabinet 60
Packing: 940x570x260 mm 6 kg
AISI 304 brushed
dimensions: 590x500
1 bowl: 450x400
cut-out: 570x480
drain: 3½”
67'
1511 001 dx
1511 002 sx
Picture shows sx version
Second tap hole available
Accessories: E L4 N2 S β1
Automatic waste fitting: PR PQ PC (page 107)
Cabinet 60
Packing: 610x530x200 mm 4,6 kg
AISI 304 brushed
dimensions: 590x500
2b: 275x400+150x300
cut-out: 570x480
drain: 3½”
67'
1510 061 dx
1510 062 sx
Picture shows sx version
Accessories: C Q β β1
Packing: 650x580x270 mm 4 kg
Standard fittings: fixing brackets, gasket (not available for under-mount sinks), waste fitting, overflow and siphon. Packing: single carton box.
60
Features
Version
AISI 304 brushed
dimensions: 860x500
2b: 450x400+275x400
cut-out: see page 249
drain: 3½”
Cabinet 90
AISI 304 brushed
dimensions: 873x513
2b: 450x400+275x400
cut-out: see page 251
drain: 3½”
Picture shows dx version
67'
Code
Technical Drawing
External dimensions refer to
standard version
1662 001 dx
1662 002 sx
)7
FT
1062 061 dx
1062 062 sx
Accessories: C E L4 N2 S β β1
For standard version only: M
Automatic waste fitting: PR PQ PC (page 107)
Second tap hole available
Packing: 940x570x260 mm 8 kg
AISI 304 brushed
dimensions: 860x500
1 bowl: 450x400
cut-out: see page 249
drain: 3½”
Cabinet 60
Sinks
Big Bowl Soft
AISI 304 brushed
dimensions: 873x513
1 bowl: 450x400
cut-out: see page 251
drain: 3½”
67'
External dimensions refer to
standard version
1661 201 dx
1661 202 sx
)7
FT
1061 261 dx
1061 262 sx
Picture shows dx version
Accessories: E L4 N2 S β1
For standard version only: M
Automatic waste fitting: PR PQ PC (page 107)
Second tap hole available
Packing: 940x570x260 mm 7,6 kg
AISI 304 brushed
dimensions: 550x500
1 bowl: 450x400
cut-out: see page 249
drain: 3½”
Cabinet 60
AISI 304 brushed
dimensions: 563x513
1 bowl: 450x400
cut-out: see page 251
drain: 3½”
External dimensions refer to
standard version
67'
1611 060
)7
FT
1115 060
Accessories: E L4 N2 S β1
Packing: 650x580x270 mm 5,2 kg
Standard fittings: fixing brackets, gasket (not available for under-mount sinks), waste fitting, overflow and siphon. Packing: single carton box.
Accessories
C
Chopping board
29x40
8653 000
E
Chopping board
5x40
8655 000
Q
White colander
17x32 cm
8151 100
L4
Glass chopping
board
23x41 cm
8631 300
S
St. steel basket
40x40 cm
8612 000
White basket
40x40 cm
8612 100
M
Sliding
chopping board
30x54
8643 000
β
St. steel dishes
holder 28x40 cm
8100 280
N2
HDPE chopping
board
27,2x42,5 cm
8657 001
β1
St. steel dishes
holder 25x43 cm
8100 301
61
Uragano
A name that evokes the large amount of water that this product is capable of housing. The ideal choice for those who prefer freedom of movement.
Uragano is almost a metre large.
Magnum
(8484 000 - pag. 118)
Geo
(8454 000 - pag. 121)
suggested mixer taps
Features
AISI 304 brushed
dimensions: 970x500
1 bowl: 910x440
cut-out: 950x480
drain: 3½”
Cabinet 100
AISI 304 microfoster
dimensions: 970x500
1 bowl: 910x440
cut-out: 950x480
drain: 3½”
Accessories: I L2 O Q T
U V Z
AISI 304 brushed
dimensions: 983x513
1 bowl: 910x440
cut-out: 950x480
drain: 3½”
AISI 304 brushed
dimensions: 983x513
1 bowl: 910x440
cut-out: see page 251
drain: 3½”
Cabinet 100
Accessories: I L2 O Q T
Version
67'
Code
1555 600
67'
microfoster
6)
1555 460
1555 469 accessory kit included
1054 600
1054 609 accessory kit included
Packing: 1070x570x260 mm 9,2 kg
)7
FT
1055 600
1055 609 accessory kit included
U V Z
Packing: 1070x570x260 mm 9,2 kg
Uragano accessory kit
NEW
Chopping
board
37x46 cm
8659 112
O
White bowl
36x30 cm
8152 100
62
External dimensions refer to
standard version
1555 609 accessory kit included
Standard fittings: fixing brackets, gasket (not available for under-mount sinks), waste fitting, overflow and siphon. Packing: single carton box.
I
Technical Drawing
V
St. steel bowl
holder 37x45 cm
8100 112
Q
White colander
17x32 cm
8151 100
Discover
the
great
functionality of the big
Uragano
bowl.
Now
available also in the
accessorized
version,
including the practical kit
described aside.
The full range of matching
accessories is presented in
the following pages.
Tornado
Sinks
A greater feeling of space with 80 cm. This is the essential quality of a Tornado sink, thanks to the shape and capacity of its bowl.
Lorenzo
(8466 000 - pag. 126)
Gamma
(8483 000 - pag. 127)
suggested mixer taps
Features
AISI 304 brushed
dimensions: 790x500
1 bowl: 730x440
cut-out: 770x480
drain: automatic 3½”
Cabinet 80
AISI 304 microfoster
dimensions: 790x500
1 bowl: 730x440
cut-out: 770x480
drain: automatic 3½”
Accessories: H
I L2 O Q T U Z
AISI 304 brushed
dimensions: 803x513
1 bowl: 730x440
cut-out: 770x480
drain: automatic 3½”
AISI 304 brushed
dimensions: 790x500
1 bowl: 730x440
cut-out: see page 249
drain: automatic 3½”
Cabinet 80
AISI 304 brushed
dimensions: 803x513
1 bowl: 730x440
cut-out: see page 251
drain: automatic 3½”
Accessories: H
Version
Code
Technical Drawing
External dimensions refer to
standard version
67'
1579 660
67'
1579 460
microfoster
6)
1078 660
Third tap hole available
Packing: 940x570x260 mm 7,8 kg
External dimensions refer to
standard version
67'
1679 660
)7
FT
1079 660
I L2 O Q T U Z
Third tap hole available
Packing: 940x570x260 mm 7,8 kg
Standard fittings: fixing brackets, gasket (not available for under-mount sinks), waste fitting, overflow and siphon. Packing: single carton box.
The flush-mount Tornado sink is perfectly
combinable with the flush-mount hobs versions
Veronika and Magic (see image aside).
63
7" Uragano and Tornado
Features
AISI 304 brushed
dimensions: 970x500
1 bowl: 910x440
cut-out: 950x480
drain hole: 7”
Cabinet 100
Accessories: I L2 O Q T
Code
Technical Drawing
67'
1555 070
U V Z
Packing: 1000x530x230 mm 8,8 kg
AISI 304 brushed
dimensions: 790x500
1 bowl: 730x440
cut-out: 770x480
drain hole: 7”
Cabinet 80
Accessories: H
Version
67'
1579 670
I L2 O Q T U Z
Packing: 820x520x230 mm 7,4 kg
Standard fittings: fixing brackets, gasket (not available for under-mount sinks), waste fitting, overflow and siphon. Packing: single carton box.
The large bowls of Uragano and Tornado are
particularly suited to the drain with 7" hole: an
original solution, very practical thanks to to the
large stainless steel collecting basket.
Accessories
H
Chopping board
37x30
8659 111
I
L2
Chopping board
37x46 cm
8659 112
T
*
St. steel dishes
holder 25x35 cm
8100 154
64
Twin chopping
board
37x46 cm
8644 003
U
St. steel dishes
holder 25x45 cm
8100 111
O
**
White bowl
36x30 cm
8152 100
V
St.steel bowl
holder 37x45 cm
8100 112
Q
White colander
17x32 cm
8151 100
Z
*
St. steel colander
25x36 cm
8154 000
*to use only with L2 chopping board **to use only with V bowl holder
Indispensable accessories
Two bowls are not strictly necessary for simultaneously washing, preparing food and storing dishes. Uragano and Tornado,
with their huge single bowl and a stunning set of accessories, become practical and complete functional centres.
Sinks
Preparing, washing dishes and utensils. The extensive set of accessories that come with Tornado and Uragano, let you turn
the sink into a true multi-purpose center.
Preparation
The functionality of the Uragano sink is
marked by the simultaneous use of two
chopping boards. The picture shows the
use of accessories L2 and Z.
Food washing
Washing fruit to prepare a fruit salad
while drying a glass at the same
time. The picture shows the use of
accessories L2, Z, V, O and Q.
Washing dishes
Applying soap and drying in the same
space. The picture shows the use of
accessories L2, T, V and O.
65
Alien 2
The Alien series bowls are now 1 cm deeper. A fine example of the quality of the steel and high standard of the Foster moulding technology.
S1000 - Z85
(8442 500 - pag. 131)
GF
(8452 000 - pag. 129)
suggested mixer taps
Features
Cabinet 90
AISI 304 brushed
dimensions: 1160x500
2 bowls: 360x400
cut-out: 1140x480
drain: 3½”
AISI 304 microfoster
dimensions: 1160x500
2 bowls: 360x400
cut-out: 1140x480
drain: 3½”
Picture shows dx version
Accessories: B L4 M N2 R β1
Automatic waste fitting: PR PQ PC (page 107)
Cabinet 60/(80)T (ref. page 37)
AISI 304 design
dimensions: 1160x500
2 bowls: 360x400
cut-out: 1140x480
drain: 3½”
AISI 304 brushed
dimensions: 970x500
2b: 360x400+150x300
cut-out: 950x480
drain: 3½”
AISI 304 microfoster
dimensions: 970x500
2b: 360x400+150x300
cut-out: 950x480
drain: 3½”
Picture shows dx version
Accessories: B M N2 Q R β1
Automatic waste fitting: PR PQ PC (page 107)
Cabinet 90
AISI 304 design
dimensions: 970x500
2b: 360x400+150x300
cut-out: 950x480
drain: 3½”
AISI 304 brushed
dimensions: 860x500
2 bowls: 360x400
cut-out: 840x480
drain: 3½”
AISI 304 microfoster
dimensions: 860x500
2 bowls: 360x400
cut-out: 840x480
drain: 3½”
Accessories: B L4 M N2 R β1
AISI 304 design
dimensions: 860x500
2 bowls: 360x400
cut-out: 840x480
drain: 3½”
Version
67'
Code
Technical Drawing
1912 061 dx
1912 062 sx
67'
1912 461 dx
microfoster
1912 462 sx
67'
1912 761 dx
design
67'
1912 762 sx
Second tap hole available
Packing: 1180x510x190 mm 7 kg
1963 061 dx
1963 062 sx
67'
1963 461 dx
microfoster
1963 462 sx
67'
1963 761 dx
design
1963 762 sx
Second and third tap hole available
Packing: 1180x520x190 mm 6,9 kg
67'
1962 060
67'
1962 460
microfoster
67'
1962 760
design
Packing: 900x520x190 mm 6 kg
Standard fittings: fixing brackets, gasket (not available for under-mount sinks), waste fitting, overflow and siphon. Packing: single carton box.
66
Features
Version
AISI 304 brushed
dimensions: 860x500
1 bowl: 360x400
cut-out: 840x480
drain: 3½”
Cabinet 45
AISI 304 microfoster
dimensions: 860x500
1 bowl: 360x400
cut-out: 840x480
drain: 3½”
Picture shows sx version
Accessories: B L4 M N2 R β1
Automatic waste fitting: PR PQ PC (page 107)
AISI 304 design
dimensions: 860x500
1 bowl: 360x400
cut-out: 840x480
drain: 3½”
67'
Code
Technical Drawing
1961 061 dx
1961 062 sx
67'
1961 461 dx
microfoster
1961 462 sx
67'
Sinks
Alien 2
1961 761 dx
design
Second tap hole available
1961 762 sx
Packing: 900x520x190 mm 5,1 kg
Standard fittings: fixing brackets, gasket (not available for under-mount sinks), waste fitting, overflow and siphon. Packing: single carton box.
All Alien 2 series models are available
with three different finishes: Foster
brushed, Design and Microfoster antiscratch.
Accessories
B
Chopping board
36x40
8654 000
N2
HDPE chopping
board
27,2x42,5 cm
8657 001
L4
Glass chopping
board
23x41 cm
8631 300
Q
White colander
17x32 cm
8151 100
M
Sliding
chopping board
30x54
8643 000
R
St. steel basket
34x40 cm
8611 000
β1
St. steel dishes
holder 25x43 cm
8100 301
67
Triplo Invaso
Professional in every aspect: dimensions as well as practicality. An absolutely new product featuring the Q4 edge and reduced 52 cm depth, to be combined with
the new cooker hobs.
Magnum
(8484 000 - pag. 118)
Arsenio
(8471 000 - pag. 123)
suggested mixer taps
Features
AISI 304 brushed
dimensions: 873x553
2b: 500x400+233x335
cut-out: 840x520
drain: automatic 3½”
Cabinet 90
54
AISI 304 brushed
dimensions: 873x553
2b: 500x400+233x335
cut-out: see page 251
drain: automatic 3½”
Version
6)
Code
1489 061 dx
Technical Drawing
External dimensions refer to
flat-edge version
1489 062 sx
)7
FT
1488 061 dx
1488 062 sx
Picture shows sx version
Accessories: L4 M2 M3 N2 O2 S U2 β1 Z
Packing: 1000x610x260 mm 9,6 kg
Standard fittings: fixing brackets, gasket (not available for under-mount sinks), waste fitting, overflow and siphon. Packing: single carton box.
Triplo Invaso is a highly practical sink.
The accessories slide along independent
guides and can be overlapped or
surmounted by an Arsenio mixer.
68
Triplo Invaso
Features
Version
AISI 304 brushed
dimensions: 860x520
2b: 500x400+233x335
cut-out: 840x500
drain: automatic 3½”
Cabinet 90
4
Code
Technical Drawing
1485 061 dx
1485 062 sx
Sinks
52
Picture shows sx version
Accessories: L4 M2 M3 N2 O2 S U2 β1 Z
Packing: 1000x610x260 mm 9,6 kg
Standard fittings: fixing brackets, gasket (not available for under-mount sinks), waste fitting, overflow and siphon. Packing: single carton box.
52
Triplo Invaso sink in Q4 Version is 52 cm deep, for a perfect matching with all S4000 gas cooker hobs.
Accessories
L4
Glass chopping
board
23x41 cm
8631 300
M2
M3
N2
O2
Chopping board
28x48
8643 115
Sliding chopping
board 28x48
8643 116
HDPE chopping
board
27,2x42,5 cm
8657 001
White plastic bowl
27,2x41,4 cm
8153 100
S
St. steel basket
40x40 cm
8612 000
White basket
40x40 cm
8612 100
U2
β1
St. steel dishes
holder 23x47
8100 115
St. steel dishes
holder 25x43 cm
8100 301
Z
St. steel colander
25x36 cm
8154 000
69
F2000
New ranges that bestow a highly personal touch on the kitchen environment.
F2000 - Alto
(8458 000 - pag. 128)
F200 - Basso
F2000
(8459 000 - pag. 128)
(845
suggested mixer taps
Features
Cabinet 80
AISI 304 brushed
dimensions: 1160x500
2b: 345x400
cut-out: 1140x480
drain: 3½”
AISI 304 microfoster
dimensions: 1160x500
2b: 345x400
cut-out: 1140x480
drain: 3½”
Version
67'
Code
Technical Drawing
2012 061 dx
2012 062 sx
67'
2012 461 dx
microfoster
2012 462 sx
Picture shows sx version
Second tap hole available
Accessories: B3 M N2 R
Packing: 1180x520x190 mm 6,7 kg
Automatic waste fitting: PR PQ PC (page 107)
Cabinet 80
AISI 304 brushed
dimensions: 860x500
2 bowls: 345x400
cut-out: 840x480
drain: 3½”
AISI 304 microfoster
dimensions: 860x500
2 bowls: 345x400
cut-out: 840x480
drain: 3½”
67'
2062 060
67'
2062 460
microfoster
Accessories: B3 M N2 R
Cabinet 45
Packing: 890x520x190 mm 5,7 kg
AISI 304 brushed
dimensions: 860x500
1 bowl: 360x400
cut-out: 840x480
drain: 3½”
AISI 304 microfoster
dimensions: 860x500
1 bowl: 360x400
cut-out: 840x480
drain: 3½”
67'
2061 061 dx
2061 062 sx
67'
2061 461 dx
microfoster
2061 462 sx
Picture shows sx version
Accessories: B2 M N2 R
Packing: 890x520x190 mm 4,9 kg
Standard fittings: fixing brackets, gasket (not available for under-mount sinks), waste fitting, overflow and siphon. Packing: single carton box.
70
F2000
Features
Version
AISI 304 brushed
dimensions: 790x500
2 bowls: 345x400
cut-out: 770x480
drain: 3½”
Cabinet 80
Technical Drawing
67'
2072 060
67'
2072 460
microfoster
Sinks
AISI 304 microfoster
dimensions: 790x500
2 bowls: 345x400
cut-out: 770x480
drain: 3½”
Code
Accessories: B3 M N2 R
Packing: 890x520x190 mm 5,6 kg
Standard fittings: fixing brackets, gasket (not available for under-mount sinks), waste fitting, overflow and siphon. Packing: single carton box.
The F2000 series, with its original double
recess and unusual interplay of lines
created by the draining board, expresses
a young, fresh character.
All 2-bowls versions match with 80 cm
cabinets.
Accessories
B2
Chopping board
36x40
8642 001
B3
N2
Chopping board
34,5x40
8642 002
HDPE chopping
board
27,2x42,5 cm
8657 001
M
Sliding chopping
board 30x54
8643 000
R
St. steel basket
34x40 cm
8611 000
71
Trapezio
For corners but not only. A modern design that enhances the work area. The draining board positioned on both sides expands the possible functions.
Ellis
(8463 000 - pag. 124)
Arsenio
(8471 000 - pag. 123)
suggested mixer taps
Features
Version
AISI 304 brushed
dimensions: 1006x552
2v:184x320+341,5x443,7
cut-out: see page 249
drain: automatic 3½”
Cabinet 60
6)
Code
Technical Drawing
3311 061 dx
3311 062 sx
Picture shows dx version
Accessories: R
Packing: 1060x620x290 mm 7,5 kg
Δ Σ Ξ
Standard fittings: fixing brackets, gasket (not available for under-mount sinks), waste fitting, overflow and siphon. Packing: single carton box.
Trapezio is a chameleon-like sink thanks to the precious
Twin chopping board (accessory) that amplifies the support
surfaces.
Accessories
R
St. steel basket
34x40 cm
8611 000
72
Ξ
St. steel
dishes holder
8100 040
Δ
St. steel colander
8154 040
Σ
Padouk wood Twin
chopping board
8644 040
Diamant
Sinks
A new proposal with an original design which can be fitted to angle, half angle or linear solutions. Available in two versions: with large+small bowl, or with a large
50 cm single bowl.
F20 - Basso
F2000
(8459 000 - pag. 128)
(84
28)
P
Play
((8487 000 - pag. 119)
suggested mixer taps
Features
Version
AISI 304 brushed
dimensions: 988x508
2b: 340x400+150x300
cut-out: see page 249
drain: automatic 3½”
Cabinet 60
Code
Technical Drawing
7mm
3312 062
Accessories: A L4 N2 O2 Q R β1
Packing: 1060x620x290 mm 7,5 kg
AISI 304 brushed
dimensions: 988x508
1 bowl: 504x400
cut-out: see page 249
drain: 3½”
Cabinet 80
7mm
3321 060
Accessories: G L4 N2 O2 S
Packing: 1060x620x290 mm 7,5 kg
Standard fittings: fixing brackets, gasket (not available for under-mount sinks), waste fitting, overflow and siphon. Packing: single carton box.
Accessories
R page 35
A
Chopping board
34x40
8647 000
O2
White bowl
41,4x27,2 cm
8153 100
G
Chopping board
40x40
8646 000
Q
White colander
17x32 cm
8151 100
L4
N2
Glass chopping
board
23x41 cm
8631 300
HDPE chopping
board
27,2x42,5 cm
8657 001
S
St. steel basket
40x40 cm
8612 000
White basket
40x40 cm
8612 100
β1
St. steel dishes
holder 25x43 cm
8100 301
73
Angolare
New bowls with tight-radius curves, redesigned draining board, the possibility of having both sinks on one side or with the draining board in the middle.
The Foster offer for corner sinks has never been this wide.
MS
(8445 000 - pag. 130)
Camillo
(8467 000 - pag. 116)
suggested mixer taps
Features
Cabinet 90x90
AISI 304 brushed
dimensions:
see drawing
2 bowls: 340x400
cut-out: see page 249
drain: 3½”
Version
Code
67'
3302 060
Accessories: A N2 O2 R β1 W
Cabinet 90x90
Packing: 890x890x240 mm 10 kg
AISI 304 brushed
dimensions:
see drawing
2 bowls: 340x400
cut-out: see page 249
drain: 3½”
67'
3307 060
Accessories: A N2 O2 R β1 W
Cabinet 90 (linear)
Packing: 890x890x240 mm 10 kg
AISI 304 brushed
dimensions:
see drawing
2b: 400x400+180x340
cut-out: see page 249
drain: 3½”
67'
3306 060
Accessories: L4 N2 O2 S T1
Automatic waste fitting: PR PQ PC (page 107)
Standard fittings: fixing brackets, gasket (not available for under-mount sinks), waste fitting, overflow and siphon. Packing: single carton box.
74
Technical Drawing
Second tap hole available
Packing: 890x890x240 mm 9,5 kg
Angolare
Version
AISI 304 brushed
dimensions:
see drawing
2b: 340x400+233x335
cut-out: see page 249
drain: 3½”
Cabinet 90 (lineare)
Code
Technical Drawing
67'
3308 060
Sinks
Features
Second tap hole available
T β1 Z
Automatic waste fitting: PR PQ PC (page 107)
Accessories: A N2 O2 R
Packing: 890x890x240 mm 9,5 kg
Standard fittings: fixing brackets, gasket (not available for under-mount sinks), waste fitting, overflow and siphon. Packing: single carton box.
Large accessories choice matching
to any kind of bowl.
Accessories
A
Chopping board
34x40
8647 000
O2
White plastic bowl
27,2x41,4 cm
8153 100
L4
N2
Glass chopping
board
23x41 cm
8631 300
HDPE chopping
board
27,2x42,5 cm
8657 001
R
St. steel basket
34x40 cm
8611 000
T1
β1
St. steel dishes
holder 25x42,5 cm
8100 201
St. steel dishes
holder 25x43 cm
8100 301
S
St. steel basket
40x40 cm
8612 000
White basket
40x40 cm
8612 100
Z
St. steel colander
25x36 cm
8154 000
T
St. steel dishes
holder 25x35 cm
8100 154
W
St. steel dishes
holder
8100 331
75
Rondò
A brilliant idea that has become an icon of “space-saving” solutions.
The Rondò project
received the Mention
of Honour at the
prestigious ADI
“Golden Compass”
international design
competition.
Flexo
(8456 000 - pag. 117)
Peppone
(8465 000 - pag. 126)
Combination with Rondò hob at page 176
suggested mixer taps
Features
Version
AISI 304 brushed
dimensions: Ø 520
1 bowl: Ø 460
cut-out: Ø 505
drain: 3½”
Cabinet 60
AISI 304 microfoster
dimensions: Ø 520
1 bowl: Ø 460
cut-out: Ø 505
drain: 3½”
Accessories: K
X Y δ
AISI 304 design
dimensions: Ø 520
1 bowl: Ø 460
cut-out: Ø 505
drain: 3½”
Code
Technical Drawing
67'
1052 060
67'
1052 460
microfoster
67'
1052 760
design
Packing: 530x530x250 mm 4 kg
Standard fittings: fixing brackets, gasket (not available for under-mount sinks), waste fitting, overflow and siphon. Packing: single carton box.
Rondò is unique also in its accessories.
The special stainless steel basket and
colanders are versatile, yet elegant furnishing
complements.
Accessories
K
Iroko Chopping
board
8648 000
76
X
St. steel basket
8610 000
Y
St. steel colander
8153 000
δ
St. steel colander
8153 001
Circolari
Sinks
The round solutions offer 5 models that differ for the size of the waste – either 3.5” or 2” – and for the installation system: standard-edge,
flush-mount or undermount.
S1000 - Z65
(8449 500 - pag. 130)
MC
(8446 000 - pag. 131)
suggested mixer taps
Features
AISI 304 brushed
dimensions: Ø 440
1 bowl: Ø 380
cut-out: Ø 420
drain: 2”
Cabinet 45
Accessories: J
Version
Code
Technical Drawing
67'
1010 000
α
Packing: 470x470x220 mm 2,6 kg
AISI 304 brushed
dimensions: Ø 440
1 bowl: Ø 380
cut-out: Ø 420
drain: 3½”
Cabinet 45
AISI 304 brushed
dimensions: Ø 420
1 bowl: Ø 380
cut-out: see page 251
drain: 3½”
67'
1010 060
)7
FT
1110 060
Standard
Accessories: J
α
Flush-mount
Packing: 470x470x220 mm 3,4 kg
Standard fittings: fixing brackets, gasket (not available for under-mount sinks), waste fitting, overflow and siphon. Packing: single carton box.
Accessories
J
Chopping board
Ø40 cm
8651 000
α
White basket
8601 000
77
S1000
AISI 304 (18/10) stainless steel as for all the other sinks, the availability of different finishes, functional accessories in addition to the Foster guarantee.
Lorenzo
(8466 000 - pag. 126)
S1000 - RO
(8443 500 - pag. 133)
suggested mixer taps
Features
Cabinet 90
AISI 304 brushed
dimensions: 1160x500
2 bowls: 360x400
cut-out: 1140x480
drain: 3½”
AISI 304 microfoster
dimensions: 1160x500
2 bowls: 360x400
cut-out: 1140x480
drain: 3½”
Picture shows sx version
Accessories: B2 M N2 R β1
Cabinet 90
AISI 304 NO brushed
dimensions: 1160x500
2 bowls: 360x400
cut-out: 1140x480
drain: 3½”
AISI 304 brushed
dimensions: 1160x500
2 bowls: 360x400
cut-out: 1140x480
drain: 2”
AISI 304 NO brushed
dimensions: 1160x500
2 bowls: 360x400
cut-out: 1140x480
drain: 2”
Version
67'
Code
Technical Drawing
1812 161 dx
1812 162 sx
67'
1812 461 dx
microfoster
1812 462 sx
67'
1812 561 dx
NO BRUSHED
67'
1812 562 sx
Packing: 1190x520x190 mm 7 kg
1812 101 dx
1812 102 sx
67'
1812 501 dx
NO BRUSHED
1812 502 sx
Picture shows sx version
Packing: 1190x520x190 mm 7 kg
Accessories: B2 M N2 R β1
Cabinet 60/(80)T (ref. page 37)
AISI 304 brushed
dimensions: 970x500
2b: 340x400+170x300
cut-out: 950x480
drain: 3½”
AISI 304 microfoster
dimensions: 970x500
2b: 340x400+170x300
cut-out: 950x480
drain: 3½”
Picture shows sx version
Accessories: B2 M N2 R β1
Automatic waste fitting: PR PQ PC (page 107)
AISI 304 NO brushed
dimensions: 970x500
2b: 340x400+170x300
cut-out: 950x480
drain: 3½”
67'
1197 161 dx
1197 162 sx
67'
1197 461 dx
microfoster
1197 462 sx
67'
1197 561 dx
NO BRUSHED
1197 562 sx
Second tap hole available
Packing: 1000x520x190 mm 6,8 kg
Standard fittings: fixing brackets, gasket (not available for under-mount sinks), waste fitting, overflow and siphon. Packing: single carton box.
78
Cabinet 45
Features
AISI 304 brushed
dimensions: 860x500
1 bowl: 340x400
cut-out: 840x480
drain: 3½”
AISI 304 microfoster
dimensions: 860x500
1 bowl: 340x400
cut-out: 840x480
drain: 3½”
Picture shows sx version
Accessories: M N2 R β1
Cabinet 45
AISI 304 NO brushed
dimensions: 860x500
1 bowl: 340x400
cut-out: 840x480
drain: 3½”
AISI 304 brushed
dimensions: 860x500
1 bowl: 340x400
cut-out: 840x480
drain: 2”
AISI 304 NO brushed
dimensions: 860x500
1 bowl: 340x400
cut-out: 840x480
drain: 2”
Version
67'
Code
Technical Drawing
1186 161 dx
1186 162 sx
67'
1186 461 dx
microfoster
1186 462 sx
67'
Sinks
S1000
1186 561 dx
NO BRUSHED
67'
1186 562 sx
Packing: 880x510x180 mm 4,8 kg
1186 101 dx
1186 102 sx
67'
1186 501 dx
NO BRUSHED
1186 502 sx
Picture shows sx version
Accessories: M N2 R β1
Cabinet 90
Packing: 880x510x180 mm 4,8 kg
AISI 304 brushed
dimensions: 860x500
2 bowls: 360x400
cut-out: 840x480
drain: 3½”
AISI 304 brushed
dimensions: 860x500
2 bowls: 360x400
cut-out: 840x480
drain: 3½”
Accessories: B2 M N2 R β1
Cabinet 90
AISI 304 NO brushed
dimensions: 860x500
2 bowls: 360x400
cut-out: 840x480
drain: 3½”
AISI 304 brushed
dimensions: 860x500
2 bowls: 360x400
cut-out: 840x480
drain: 2”
AISI 304 NO brushed
dimensions: 860x500
2 bowls: 360x400
cut-out: 840x480
drain: 2”
67'
1886 160
67'
1886 460
microfoster
67'
1886 560
Packing: 880x510x180 mm 6 kg
NO BRUSHED
67'
1886 100
67'
1886 500
NO BRUSHED
Packing: 880x510x180 mm 6 kg
Accessories: B2 M N2 R β1
Cabinet 80
AISI 304 brushed
dimensions: 790x500
2 bowls: 360x400
cut-out: 770x480
drain: 2”
AISI 304 brushed
dimensions: 790x500
2 bowls: 360x400
cut-out: 770x480
drain: 3½”
Accessories: M N2 R β1
AISI 304 NO brushed
dimensions: 790x500
2 bowls: 360x400
cut-out: 770x480
67'
1279 000
67'
1279 060
67'
NO BRUSHED
1279 500
drain: 2”
1279 560
drain: 3½”
Packing: 880x510x180 mm 5,4 kg
Standard fittings: fixing brackets, gasket (not available for under-mount sinks), waste fitting, overflow and siphon. Packing: single carton box.
79
S1000
Features
Version
AISI 304 brushed
dimensions: 790x500
1 bowl: 340x400
cut-out: 770x480
drain: 2”
Cabinet 45
67'
AISI 304 NO brushed
dimensions: 790x500
1 bowl: 340x400
cut-out: 770x480
Accessories: M N2 R β1
67'
1179 001 dx
1179 061 dx
1179 062 sx
67'
NO BRUSHED
AISI 304 brushed
dimensions: 440x500
1 bowl: 360x360
cut-out: 420x480
drain: 2”
Cabinet 45
Technical Drawing
1179 002 sx
AISI 304 brushed
dimensions: 790x500
1 bowl: 340x400
cut-out: 770x480
drain: 3½”
Picture shows sx version
Code
AISI 304 brushed
dimensions: 440x500
1 bowl: 360x360
cut-out: 420x480
drain: 3½”
67'
1179 501 dx
1179 502 sx
drain: 2”
1179 561 dx
1179 562 sx
drain: 3½”
Packing: 890x510x190 mm 4,7 kg
1144 001 dx
1144 002 sx
67'
1144 061 dx
1144 062 sx
Picture shows sx version
Version DX means right faucet hole, SX left faucet hole
Packing: 520x480x190 mm 3,8 kg
AISI 304 brushed
dimensions: 290x500
1 bowl: 240x340
cut-out: 270x480
drain: 2”
Cabinet 30
67'
1129 000
Packing: 520x480x190 mm 3,1 kg
Standard fittings: fixing brackets, gasket (not available for under-mount sinks), waste fitting, overflow and siphon. Packing: single carton box.
Accessories
B2
Chopping board
36x40
8642 001
M
Sliding chopping
board
30x54
8643 000
80
N2
HDPE chopping
board
27,2x42,5 cm
8657 001
R
St. steel basket
34x40 cm
8611 000
β1
St. steel dishes
holder 25x43 cm
8100 301
81
82
Undermount sinks
Undermount
Sinks
Stainless steel is always fashionable, and it blends perfectly in any worktop,
be it granite, quartz or solid-surface. The large range of Foster undermount
sinks, from those with “classical” design and wide radius to the minimalist
ones with squared corners, makes it possible to choose according to
everyone’s specific needs.
Quadra page 88
Big Bowl Soft page 101
Quadra R10 page 91
Triplo invaso page 102
KE page 93
Tornado page 103
S4000 page 97
Circolari page 103
S3000 page 99
Complements page 104
Big Bowl page 101
How to
clean steel
page 109
83
At the root of each project
Foster, ever sensitive to its customers’ needs, aims at the maximum possible quality, coupled with wide choice of designs and
sizes. This large range of undermount sinks is here displayed according to corner radius; from squared bowls minimalism to
the perfectly rounded corners.
In the following table it is summarized according to “cabinets”: the easiest way to choose the best product according to its
own built-in solution.
ROUND SINK - radius 190 - p. 103
TORNADO SINK - radius 125 - p. 103
BIG BOWL SINK- radius 95/60 - p. 101
S3000 SINK - radius 60 - p. 99
TRIPLO INVASO - radius 50 - p. 102
S4000 SINK- radius 25 - p. 97
KE - radius 15 - p. 93
QUADRA R10 - radius 10 - p. 91
QUADRA SINK - radius 0 - p. 88
84
Notice for installation
Installation procedure with nut, bolt and
bracket for bowls with folded edge.
bordo vasca piatto
Installation procedure with nut, bolt
and bracket for bowls with flat edge.
Installation procedure with nut and
bolt for bowls with edge provided with
fixing holes (Quadra series).
Undermount
Sinks
bordo vasca con risvolto
All models are supplied with installation kit (nut, bolt and bracket). The alternative use of different screws or bolts is left to the discretion of the installer.
Worktop drilling
The drawing with instruction to drill the worktop properly is included in the
packing.
The holes’ dimension is to be considered merely as the manufacturer’s
suggestion. Small adjustments can be adopted on the basis of need or
preference of the user, as per the attached schemes.
Notice:
the compatibility of the accessories is assured only if the manufacturer’s drilling
instructions are respected.
Foster offers its assistance for drilling the worktop properly with dwg drawings,
now available for downloading on our website www.fosterspa.com on the
product specifications page.
Negative drilling
(invisible edge)
Drilling at bowl’s edge
Positive drilling
(visible steel edge)
Standard fitting
Installation with
recess on the basin
Cabinets
The cabinets’ specifications shown for each model are referred only to the
bowls’ overall dimensions, and do not take into account the fixing systems.
Different overall dimensions correspond to different installation methods.
Moreover, these are negligible if kept within the thickness of the worktop, by
creating a proper nook.
It is therefore recommended to check beforehand for possible interferences.
Installation with
recess on the
worktop
85
The undermount range
The scheme below shows the whole undermount range classified according to "cabinet": the smallest standard element of a
modular kitchen in which a sink can be fitted in.
cabinet
120
Quadra - page 89
Dim. 1050x450 mm - R0
cabinet
80
Quadra - page 89
Dim. 785x460 mm - R0
cabinet
80
KE - page 94
Dim. 750x440 mm - R15
S4000 - page 97
cabinet
60
Quadra - page 89
Dim. 550x505 mm - R0
Quadra R10 - page 91
100
Dim. 760x500 mm - R0
Quadra R10 - page 91
KE - page 93
Dim. 930x450 mm - R15
Dim. 736x426 mm - R10
KE - pages 93-94
cabinet
cabinet
Dim. 760x480 mm - R25
Dim. 526x426 mm - R10
S3000 - page 99
Dim. 761x446 mm - R60
Tornado - page 103
Dim. 476x426 mm - R10
KE - pages 94-95
90
Dim. 800x450 mm - R15
Dim. 816x524 mm - R125
Dim. 538x438 mm - R15
Quadra - page 89
Dim. 850x505 mm - R0
Dim. 760x450 mm - R15
Dim. 820x450 mm - R15
Dim. 760x450 mm - R15
Triplo invaso - page 102
Dim. 860x540 mm - R50
86
Dim. 486x436 mm - R15
S4000 - page 97
KE - page 93
Dim. 660x450 mm - R15
Dim. 490x440 mm - R25
The undermount range
60
S3000 - pages 99-100
Dim. 539x436 mm - R60
cabinet
45
Quadra - page 90
Dim. 450x505 mm - R0
Quadra R10 - page 92
Dim. 580x460 mm - R60
Dim. 406x426 mm - R10
cabinet
40
Quadra - page 90
Dim. 320x505 mm - R0
Dim. 580x460 mm - R60
Dim. 550x500 mm - R95
Big Bowl - page 101
Dim. 475x425 mm - R95
Dim. 440x440 mm - R15
S4000 - page 97
Dim. 440x440 mm - R25
S3000 - page 99
Dim. 441x441 mm - R60
30
KE - page 96
Dim. 220x440 mm - R15
KE - pages 95-96
Dim. 376x436 mm - R15
KE - page 95
Big Bowl Soft - page 101
cabinet
Undermount
Sinks
cabinet
Dim. 220x380 mm - R15
S4000 - page 98
Dim. 310x440 mm - R15
S4000 - page 98
Dim. 380x440 mm - R25
Dim. 220x380 mm - R25
Big Bowl - page 101
Dim. 170x320 mm - R50
S3000 - pages 99-100
Dim. 381x441 mm - R60
Circolari - page 103
Dim. Ø 440 mm - R190
Dim. 377x437 mm - R60
Dim. Ø 440 mm - R190
Key to symbols
Brushed finish
Microfoster finish
87
Quadra
R.0
R9
The corners at the bottom of the bowls are now
rounded to make them easier to clean while the
vertical ones, strictly “curve-less”, are due to
the original, plan and sober concept.
microfoster
In the picture: undermount Quadra bowl with
Microfoster finish, an exclusive proposal.
Tre Alto
(8468 000 - pag. 122)
88
1/2 Circle
(8480 000 - pag. 120)
Quadra
Features
AISI 304 brushed
bowl: 47x40 cm
dimensioni:1050x450
cut-out: see page 251
drain: 3½”
Cabinet 120
Version
Code
Technical Drawing
67
1210 890
Accessories:
T T1 T2 Z Z2
Automatic waste fitting: PR PQ PC
Packing: 1140x540x290 mm 13,2 kg
AISI 304 brushed
bowl: 80x40 cm
dimensions: 850x505
cut-out: see page 251
drain: 3½”
Cabinet 90
67
1218 890
Undermount
Sinks
L3 L4 N2 N3 O2 P2 S
Accessories:
L3 L4 N2 N3 O2 P2 S
T T1 T2 Z Z2
Automatic waste fitting: PR PQ PC
Packing: 930x540x290 mm 11 kg
AISI 304 brushed
bowl: (2x) 34x40 cm
dimensions: 785x460
cut-out: see page 251
drain: 3½”
Cabinet 80
67
1208 890
Accessories: L4 N2 N3 O2 P2 R T1 T2 Z2
Automatic waste fitting: PR PQ PC
Packing: 950x540x290 mm 10,9 kg
AISI 304 brushed
bowl: 71x40 cm
dimensions: 760x500
cut-out: see page 251
drain: 3½”
Cabinet 80
AISI 304 microfoster
bowl: 71x40 cm
dimensions: 760x500
cut-out: see page 251
drain: 3½”
67
1217 890
67
1217 840
Microfoster
Accessories:
L3 L4 N2 N3 O2 P2 S
T T1 T2 Z Z2
Automatic waste fitting: PR PQ PC
Packing: 910x540x290 mm 10,6 kg
AISI 304 brushed
bowl: 50x40 cm
dimensions: 550x505
cut-out: see page 251
drain: 3½”
Cabinet 60
AISI 304 microfoster
bowl: 50x40 cm
dimensions: 550x505
cut-out: see page 251
drain: 3½”
67
1215 890
67
1215 840
Microfoster
Accessories:
L3 L4 N2 N3 O2 P2 S
T T1 T2 Z Z2
Automatic waste fitting: PR PQ PC
Packing: 610x540x290 mm 6,6 kg
Standard fittings: fixing brackets, gasket (not available for under-mount sinks), waste fitting, overflow and siphon. Packing: single carton box.
89
Quadra
Features
Version
AISI 304 brushed
bowl: 40x40 cm
dimensions: 450x505
cut-out: see page 251
drain: 3½”
Cabinet 45
AISI 304 microfoster
bowl: 40x40 cm
dimensions: 450x505
cut-out: see page 251
drain: 3½”
Code
Technical Drawing
67
1214 890
67
1214 840
Microfoster
Accessories:
L3 L4 N2 N3 O2 P2 S
T T1 T2 Z Z2
Automatic waste fitting: PR PQ PC
Packing: 560x540x290 mm 6 kg
AISI 304 brushed
bowl: 27x40 cm
dimensions: 320x505
cut-out: see page 251
drain: 3½”
Cabinet 40
67
1202 890
Accessories: L4 N2 O2 T1
Automatic waste fitting: PR PQ PC
Packing: 400x540x290 mm 4,4 kg
AISI 304 brushed
bowl: 80x40 cm
dimensions: 850x505
cut-out: see page 251
drain: 7”
Quadra 7"
Cabinet 90
Accessories: L3 L4 N2 O2 S
67
1218 897
T T1 Z
Packing: 930x540x290 mm 11,4 kg
Standard fittings: fixing brackets, gasket (not available for under-mount sinks), waste fitting, overflow and siphon. Packing: single carton box.
Accessories
L3
L4
N2
N3
Twin chopping
board
41x41 cm
8644 004
Glass chopping
board
23x41 cm
8631 300
HDPE chopping
board
27,2x42,5 cm
8657 001
HDPE Twin
chopping board
31,7x42,5 cm
8644 101
O2
P2
White plastic bowl
27,2x41,4 cm
8153 100
Grating kit
complete with
ring support and
food collection tray
8159 101
PC
Automatic
waste fitting
see page 107
8407 103
90
**
R
PR
PQ
Automatic
waste fitting
see page 107
8407 100
8407 000
Automatic
waste fitting
see page 107
8407 102
S
St. steel basket
34x40 cm
8611 000
T1
T2
St. steel dishes
holder 25x42,5 cm
8100 201
St. stell dishes
holder
21,4x37,9 cm
8100 303
**
St. steel basket
40x40 cm
8612 000
White basket
40x40 cm
8612 100
Z
*
St. steel colander
25x36 cm
8154 000
T
*
St. steel dishes
holder 25x35 cm
8100 154
Z2
**
St. steel perforated
pan 21,5x38 cm
8151 000
*To use only with L3 chopping board **To use only with N3 chopping board
Quadra R10
Undermount
Sinks
The functionality of a 10 mm radius on all the edges matches the essential design of Quadra sinks, made even more exclusive by the new rectangular overflow.
R10
Tre Alto
(8468 000 - pag. 122)
Geo
(8454 000 - pag. 121)
suggested mixer taps
Features
AISI 304 brushed
bowl: 71x40 cm
dimensions: 736x426
cut-out: see page 251
drain: 3½”
Cabinet 80
Accessories:
L3 L4 N2 N3 O2 P2 S
Version
Code
Technical Drawing
67
2307 890
T T1 T2 Z Z2
Automatic waste fitting: PA
Packing: 930x560x250 mm 10 kg
AISI 304 brushed
bowl: 50x40 cm
dimensions: 526x426
cut-out: see page 251
drain: 3½”
Cabinet 60
Accessories: L3 L4 N2 N3 O2 P2 PS S
67
2305 890
T
T1 T2 Z Z2
Automatic waste fitting: PA
AISI 304 brushed
bowl: 45x40 cm
dimensions: 476x426
cut-out: see page 251
drain: 3½”
Cabinet 60
Accessories: L3 L4 N2 N3 O2 P2 PS S
67
2304 890
T
T1 T2 Z Z2
Automatic waste fitting: PA
91
Quadra R10
Features
Version
AISI 304 brushed
bowl: 38x40 cm
dimensions: 406x426
cut-out: see page 251
drain: 3½”
Cabinet 45
Code
Technical Drawing
67
2303 890
Accessories:
L4 N2 N3 O2 P2 PA PS R T1 T2 Z2
Automatic waste fitting: PA
Packing: 600x560x290 mm 5,4 kg
Standard fittings: fixing brackets, gasket (not available for under-mount sinks), waste fitting, overflow and siphon. Packing: single carton box.
Detail of the elegant perimetric overflow that
enhance the design of the sink.
Accessories
L3
L4
N2
Twin chopping
board
41x41 cm
8644 004
Glass chopping
board
23x41 cm
8631 300
HDPE chopping
board
27,2x42,5 cm
8657 001
N3
O2
P2
HDPE Twin
chopping board
31,7x42,5 cm
8644 101
White plastic bowl
27,2x41,4 cm
8153 100
Grating kit
complete with
ring support and
food collection tray
8159 101
PS
Waste fitting
SPACE
8403 308
92
R
**
S
St. steel basket
34x40 cm
8611 000
T1
T2
St. steel dishes
holder 25x42,5 cm
8100 201
St. stell dishes
holder
21,4x37,9 cm
8100 303
**
T
St. steel basket
40x40 cm
8612 000
White basket
40x40 cm
8612 100
Z
PA
Automatic waste
fitting SPACE see
page 106
8407 108
*
St. steel colander
25x36 cm
8154 000
*
St. steel dishes
holder 25x35 cm
8100 154
Z2
**
St. steel perforated
pan 21,5x38 cm
8151 000
*To use only with L3 chopping board **To use only with N3 chopping board
KE - R15
A comprehensive collection of one-bowl and two-bowl solutions where you will surely find the perfect sink for your needs.
Undermount
Sinks
R15
Lorenzo
(8466 000 - pag. 126)
Camillo
(8467 000 - pag. 116)
suggested mixer taps
Features
AISI 304 brushed
bowl: 45x40/40x40 cm
dimensions: 930x450
cut-out: see page 251
drain: 3½
Cabinet 100
Accessories: L3 N2 N3 O2 P2 S
Version
Code
67
2207 860
T T2 Z Z2
Automatic waste fitting: PR PQ PC
Packing: 1050x520x250 mm 12 kg
AISI 304 brushed
bowl: 40x40/34x40 cm
dimensions: 820x450
cut-out: see page 251
drain: 3½
Cabinet 90
Accessories: L3 N2 N3 O2 P2 S
67
2206 860
T T2 Z Z2
Automatic waste fitting: PR PQ PC
Packing: 950x520x250 mm 10,5 kg
AISI 304 brushed
bowl: 45x40/27x40 cm
dimensions: 800x450
cut-out: see page 251
drain: 3½
Cabinet 80
Accessories: L3 N2 N3 O2 P2 S
Technical Drawing
67
2205 860
T T2 Z Z2
Automatic waste fitting: PR PQ PC
Packing: 950x520x250 mm 10,5 kg
Standard fittings: fixing brackets, gasket (not available for under-mount sinks), waste fitting, overflow and siphon. Packing: single carton box.
93
KE - R15
Features
AISI 304 brushed
bowl: 50x40/18x40 cm
dimensions: 760x450
cut-out: see page 251
drain: 3½
Cabinet 80
Version
Code
Technical Drawing
67
2204 860
Accessories:
L3 L4 N2 N3 O2 P2 S
T T2 Z Z2
Packing: 850x520x250 mm 8,5 kg
Automatic waste fitting: PR PQ PC
AISI 304 brushed
bowl: (2x) 34x40 cm
dimensions: 760x450
cut-out: see page 251
drain: 3½
Cabinet 80
67
2203 860
Accessories: L4 N2 N3 O2 P2 R T2 Z2
Automatic waste fitting: PR PQ PC
Packing: 850x520x250 mm 8,4 kg
AISI 304 brushed
bowl: 40x40/18x40 cm
dimensions: 660x450
cut-out: see page 251
drain: 3½
Cabinet 80
67
2202 860
Accessories:
L3 L4 N2 N3 O2 P2 S
T T2 Z Z2
Automatic waste fitting: PR PQ PC
Packing: 760x520x250 mm 6,2 kg
AISI 304 brushed
bowl: 71x40 cm
dimensions: 750x440
cut-out: see page 251
drain: 3½
Cabinet 80
67
2157 860
Accessories:
L3 L4 N2 N3 O2 P2 S
T T2 Z Z2
Packing: 930x520x250 mm 8,2 kg
Automatic waste fitting: PR PQ PC
AISI 304 brushed
bowl: 50x40 cm
dimensions: 538x438
cut-out: see page 251
drain: 3½
Cabinet 60
67
2155 860
Accessories:
L3 L4 N2 N3 O2 P2 S
T T2 Z Z2
Automatic waste fitting: PR PQ PC
Standard fittings: fixing brackets, gasket (not available for under-mount sinks), waste fitting, overflow and siphon. Packing: single carton box.
94
Packing: 650x580x290 mm 7 kg
KE - R15
Features
Version
AISI 304 brushed
bowl: 45x40 cm
dimensions: 486x436
cut-out: see page 251
drain: 3½
Cabinet 60
Code
Technical Drawing
67
2154 860
Accessories:
L3 L4 N2 N3 O2 P2 S
T T2 Z Z2
Packing: 530x520x280 mm 6,3 kg
Automatic waste fitting: PR PQ PC
67
2156 860
Undermount
Sinks
AISI 304 brushed
bowl: 40x40 cm
dimensions: 440x440
cut-out: see page 251
drain: 3½
Cabinet 45
Accessories:
L3 L4 N2 N3 O2 P2 S
T T2 Z Z2
Automatic waste fitting: PR PQ PC
Packing: 520x500x280 mm 5,8 kg
AISI 304 brushed
bowl: 34x40 cm
dimensions: 376x436
cut-out: see page 251
drain: 3½
Cabinet 40
67
2153 860
Accessories:
L4 N2 N3 O2 P2 R T2 Z2
Automatic waste fitting: PR PQ PC
Packing: 520x460x280 mm 5,3 kg
Standard fittings: fixing brackets, gasket (not available for under-mount sinks), waste fitting, overflow and siphon. Packing: single carton box.
Accessories
L3
L4
N2
Twin chopping
board
41x41 cm
8644 004
Glass chopping
board
23x41 cm
8631 300
HDPE chopping
board
27,2x42,5 cm
8657 001
N3
O2
P2
HDPE Twin
chopping board
31,7x42,5 cm
8644 101
White plastic bowl
27,2x41,4 cm
8153 100
Grating kit
complete with
ring support and
food collection tray
8159 101
PQ
PC
Automatic
waste fitting
see page 107
8407 102
Automatic
waste fitting
see page 107
8407 103
T
*
St. steel dishes
holder 25x35 cm
8100 154
T2
**
St. stell dishes
holder
21,4x37,9 cm
8100 303
**
R
S
St. steel basket
34x40 cm
8611 000
Z
PR
Automatic
waste fitting
see page 107
8407 100
8407 000
*
St. steel colander
25x36 cm
8154 000
St. steel basket
40x40 cm
8612 000
White basket
40x40 cm
8612 100
Z2
**
St. steel perforated
pan 21,5x38 cm
8151 000
*To use only with L3 chopping board **To use only with N3 chopping board
95
KE - R15
Features
Version
AISI 304 brushed
bowl: 27x40 cm
dimensions: 310x440
cut-out: see page 251
drain: 3½
Cabinet 40
Code
Technical Drawing
67
2152 860
Accessories: L4 N2
Automatic waste fitting: PR PQ PC
Packing: 460x460x280 mm 4,5 kg
AISI 304 brushed
bowl: 18x40 cm
dimensions: 220x440
cut-out: see page 251
drain: 3½
Cabinet 30
67
2151 860
Automatic waste fitting: PR PQ PC
Packing: 300x460x280 mm 3,8 kg
AISI 304 brushed
bowl: 18x34 cm
dimensions: 220x380
cut-out: see page 251
drain: 3½
Cabinet 30
67
2150 860
Automatic waste fitting: PR PQ PC
Packing: 300x460x280 mm 3,4 kg
Standard fittings: fixing brackets, gasket (not available for under-mount sinks), waste fitting, overflow and siphon. Packing: single carton box.
Accessories
L4
Glass chopping
board
23x41 cm
8631 300
96
N2
PR
PQ
PC
HDPE chopping
board
27,2x42,5 cm
8657 001
Automatic
waste fitting
see page 107
8407 100
8407 000
Automatic
waste fitting
see page 107
8407 102
Automatic
waste fitting
see page 107
8407 103
S4000 - R25
Whatever your type of worktop, a stainless steel flush-mount Foster sink will always guarantee hygiene, quality and durability over time.
Undermount
Sinks
R25
Minimal plus
(8474 100 - pag. 115)
Spring
(8472 000 - pag. 117)
suggested mixer taps
Features
AISI 304 brushed
bowl: 71x43 cm
dimensions: 760x480
cut-out: see page 251
drain: 3½”
Cabinet 80
Version
Code
Technical Drawing
67
1267 860
Accessories: S
Automatic waste fitting: PR PQ PC
Packing: 930x570x250 mm 10,5 kg
AISI 304 brushed
bowl: 45x40 cm
dimensions: 490x440
cut-out: see page 251
drain: 3½”
Cabinet 60
67
1263 860
Accessories:
L3 L4 N2 N3 O2 P2 S
T T2 Z Z2
Automatic waste fitting: PR PQ PC
Packing: 510x510x250 mm 6 kg
AISI 304 brushed
bowl: 40x40 cm
dimensions: 440x440
cut-out: see page 251
drain: 3½”
Cabinet 45
67
1269 860
Accessories:
L3 L4 N2 N3 O2 P2 S
T T2 Z Z2
Automatic waste fitting: PR PQ PC
Packing: 510x510x250 mm 5,8 kg
Standard fittings: fixing brackets, gasket (not available for under-mount sinks), waste fitting, overflow and siphon. Packing: single carton box.
97
S4000 - R25
Features
Version
AISI 304 brushed
bowl: 34x40 cm
dimensions: 380x440
cut-out: see page 251
drain: 3½”
Cabinet 40
Code
Technical Drawing
67
1262 860
Accessories: L4 N2 O2 R
Automatic waste fitting: PR PQ PC
Packing: 510x450x250 mm 5 kg
AISI 304 brushed
bowl: 18x34 cm
dimensions: 220x380
cut-out: see page 251
drain: 3½”
Cabinet 30
67
1260 860
Automatic waste fitting: PR PQ PC
Packing: 510x300x200 mm 2,4 kg
Standard fittings: fixing brackets, gasket (not available for under-mount sinks), waste fitting, overflow and siphon. Packing: single carton box.
Accessories
L3
L4
N2
Twin chopping
board
41x41 cm
8644 004
Glass chopping
board
23x41 cm
8631 300
HDPE chopping
board
27,2x42,5 cm
8657 001
N3
O2
P2
HDPE Twin
chopping board
31,7x42,5 cm
8644 101
White plastic bowl
27,2x41,4 cm
8153 100
Grating kit
complete with
ring support and
food collection tray
8159 101
PQ
PC
Automatic
waste fitting
see page 107
8407 102
Automatic
waste fitting
see page 107
8407 103
T
*
St. steel dishes
holder 25x35 cm
8100 154
T2
**
St. stell dishes
holder
21,4x37,9 cm
8100 303
**
R
S
St. steel basket
34x40 cm
8611 000
Z
PR
Automatic
waste fitting
see page 107
8407 100
8407 000
*
St. steel colander
25x36 cm
8154 000
St. steel basket
40x40 cm
8612 000
White basket
40x40 cm
8612 100
Z2
**
St. steel perforated
pan 21,5x38 cm
8151 000
*To use only with L3 chopping board **To use only with N3 chopping board
98
S3000
Cabinet 60
Features
AISI 304 brushed
bowl: 50x40 cm
dimensions: 539x436
cut-out: see page 251
drain: 3½”
Version
67
Code
Technical Drawing
1116 861 dx
1116 862 sx
Picture shows dx version
Accessories: L4 N2 O2 S
Automatic waste fitting: PR PQ PC
AISI 304 brushed
bowl: 40x40 cm
dimensions: 441x441
cut-out: see page 251
drain: 3½”
67
1114 861 dx
1114 862 sx
Undermount
Sinks
Cabinet 45
Packing: 630x530x280 mm 6,6 kg
Picture shows dx version
Accessories: L4 N2 O2 S
Automatic waste fitting: PR PQ PC
Cabinet 40
Packing: 550x540x280 mm 5,8 kg
AISI 304 brushed
bowl: 34x40 cm
dimensions: 381x441
cut-out: see page 251
drain: 3½”
67
1117 861 dx
1117 862 sx
Picture shows dx version
Accessories: L4 N2 O2
Automatic waste fitting: PR PQ PC
Cabinet 80
Packing: 530x470x280 mm 5 kg
AISI 304 brushed
bowl: (2x) 34x40 cm
dimensions: 761x446
cut-out: see page 251
drain: 3½”
67
1302 860
Accessories: L4 N2
Automatic waste fitting: PR PQ PC
Cabinet 60
Packing: 810x520x230 mm 8,4 kg
AISI 304 brushed
bowl: 34x40/15x30 cm
dimensions: 580x460
cut-out: see page 251
drain: 3½”
67
1309 861 dx
1309 862 sx
Picture shows dx version
Accessories: A Q R
Automatic waste fitting: PR PQ PC
Standard fittings: fixing brackets, gasket (not available for under-mount sinks), waste fitting, overflow and siphon. Packing: single carton box.
For dx/sx version on mean bowl with drain on righ/left side.
Packing: 670x580x290 mm 5,6 kg
99
S3000
Features
Version
AISI 304 brushed
bowl: 34x40/15x30 cm
dimensions: 580x460
cut-out: see page 251
drain: 3½”
Cabinet 60
67
Code
Technical Drawing
1308 861 dx
1308 862 sx
Picture shows dx version
Accessories: A Q R
Automatic waste fitting: PR PQ PC
Packing: 600x520x200 mm 5,1 kg
67
1307 860
180
AISI 304 brushed
bowl: 34x40 cm
dimensions: 377x437
cut-out: see page 251
drain: 3½”
Cabinet 40
Accessories: R
Automatic waste fitting: PR PQ PC
Packing: 520x480x190 mm 3,4 kg
Standard fittings: fixing brackets, gasket (not available for under-mount sinks), waste fitting, overflow and siphon. Packing: single carton box.
Accessories
A
Chopping board
34x40
8647 000
N2
O2
PR
PQ
HDPE chopping
board
27,2x42,5 cm
8657 001
White plastic bowl
27,2x41,4 cm
8153 100
Automatic
waste fitting
see page 107
8407 100
8407 000
Automatic
waste fitting
see page 107
8407 102
PC
Automatic
waste fitting
see page 107
8407 103
100
L4
Glass chopping
board
23x41 cm
8631 300
Q
White colander
17x32 cm
8151 100
R
St. steel basket
34x40 cm
8611 000
S
St. steel basket
40x40 cm
8612 000
White basket
40x40 cm
8612 100
Big Bowl
Features
Version
AISI 304 brushed
bowl: 45x40 cm
dimensions: 475x425
cut-out: see page 251
drain: 3½”
Cabinet 60
Code
Technical Drawing
67
1811 050
Accessories: S
Automatic waste fitting: PR PQ PC
Packing: 610x530x200 mm 4,8 kg
AISI 304 brushed
bowl: 15x30 cm
dimensions: 170x320
cut-out: see page 251
drain: 3½”
67
1300 068
Undermount
Sinks
Cabinet 30
Automatic waste fitting: PR PQ PC
Packing: 520x480x190 mm 1 kg
Standard fittings: fixing brackets, gasket (not available for under-mount sinks), waste fitting, overflow and siphon. Packing: single carton box.
Big Bowl Soft
Features
Version
AISI 304 brushed
bowl: 45x40
dimensions: 550x500
cut-out: see page 251
drain: 3½”
Cabinet 60
Code
Technical Drawing
67
1611 068
Accessories: E L4 N2 S
Packing: 650x580x270 mm 5,2 kg
Automatic waste fitting: PR PQ PC
Standard fittings: fixing brackets, gasket (not available for under-mount sinks), waste fitting, overflow and siphon. Packing: single carton box.
Accessories
E
Chopping board
45x40
8655 000
L4
N2
PR
Glass chopping
board
23x41 cm
8631 300
HDPE chopping
board
27,2x42,5 cm
8657 001
Automatic
waste fitting
see page 107
8407 100
8407 000
PQ
PC
Automatic
waste fitting
see page 107
8407 102
Automatic
waste fitting
see page 107
8407 103
S
St. steel basket
40x40 cm
8612 000
White basket
40x40 cm
8612 100
101
Triplo Invaso
Features
Version
AISI 304 brushed
bowls: 50x40/23x34 cm
dimensions: 860x540
cut-out: see page 251
drain: automatic 3½”
Cabinet 90
67
Code
Technical Drawing
1488 861 dx
1488 862 sx
54
Picture shows sx version
Accessories: M2 M3 N2 O2 S U2 β1 Z
Packing: 1000x600x250 mm 9,6 kg
Standard fittings: fixing brackets, gasket (not available for under-mount sinks), waste fitting, overflow and siphon. Packing: single carton box.
The undermount solution exalts the particular
feature of Triplo Invaso sink which is able to
contain different sliding accessories.
Accessories
H
Chopping board
37x30
8659 111
M3
N2
Sliding Chopping
board 28x48
8643 116
HDPE chopping
board
27,2x42,5 cm
8657 001
Q
White colander
17x32 cm
8151 100
U2
St. steel dishes
holder 23x47
8100 115
102
I
Chopping board
37x46 cm
8659 112
S
St. steel basket
40x40 cm
8612 000
White basket
40x40 cm
8612 100
Z
St. steel colander
25x36 cm
8154 000
L2
M2
Twin chopping
board
37x46 cm
8644 003
Chopping board
28x48
8643 115
O
**
White plastic bowl
36x30 cm
8152 100
T
*
St. steel dishes
holder 25x35 cm
8100 154
α
White basket
8601 000
O2
White plastic bowl
27,2x41,4 cm
8153 100
U
St. steel dishes
holder 25x45 cm
8100 111
β1
St. steel dishes
holder 25x43 cm
8100 301
*to use only with L2 chopping board **to use only with V bowl holder
Tornado
Features
AISI 304 brushed
bowl: 73x44 cm
dimensions: 816x524
cut-out: see page 251
drain: automatic 3½”
Cabinet 80
Version
Code
Technical Drawing
67
1679 860
Third tap hole available
I L2 O Q T U Z
Packing: 940x570x260 mm 7,8 kg
Undermount
Sinks
Accessories: H
The wide radius of the corners in undermount
Tornado sink gives great elegance, which fits
both to classic and to modern kitchens.
Circolari
Features
Cabinet 45
AISI 304 brushed
bowl: Ø 38 cm
dimensions: Ø 440
cut-out: see page 251
drain: 2”
Version
Code
67
1010 008
Accessories: α
Cabinet 45
Accessories: α
Automatic waste fitting: PR PQ PC
Technical Drawing
Packing: 470x470x220 mm 2,6 kg
AISI 304 brushed
bowl: Ø 38 cm
dimensions: Ø 440
cut-out: see page 251
drain: 3½”
67
1010 068
Packing: 470x470x220 mm 3,4 kg
Standard fittings: fixing brackets, gasket (not available for under-mount sinks), waste fitting, overflow and siphon. Packing: single carton box.
103
Complements
Dispenser
NEW
Chromed steel built-in liquid
soap/detergent dispenser
Chromed steel built-in liquid
soap/detergent dispenser
Code
Code
8520 000
8530 000
The detail shows the perfect combination
between the Tre Alto mixer and the Q
Dispenser.
Waste bins
Code
Ø146 fori top
ghiere esterne Ø160
8113 800
One-way waste-basket with access from the
worktop (content 20 litres). Lid and paneling in
stainless-steel.
Code
FLUSH-MOUNT
CUT-OUT
8119 000
Waste-basket with access from
the worktop; top-end extractable
bag with stainless-steel cover
(content 13 litres)
BUILT-IN CUT-OUT
104
FLUSH-MOUNT
CUT-OUT
Undermount
Sinks
Complements
Waste-disposer unit
Power
Code
380 W
8439 112
Foster waste disposers can be installed in all our sinks with 3.5” waste
fitting. Remember to check the dimensions of the sink-waste shredder
assembly. Waste disposers’ compatibility with sinks of other manufacturers
is not guaranteed.
18
327
176
127
182
Accessories for food waste disposers
Radio control
Pneumatic push button
Code
Code
8439 901
8439 042
The remote control allows easy
activation of the food waste disposer
even when a switch-controlled outlet is
not available.
Alternative to the radio control, it can be
installed on the worktop or on the sink
with hole 35 mm. A small unit, to be fixed
in the area under the sink, is connected
to the waste disposer.
105
Complements
"Space"-saving waste fittings for sinks with perimetric overflow
PA
NEW
"Space" automatic waste fitting
with overflow
90 mm
Code
8407 108
PS
NEW
"Space" waste fitting with overflow
Code
8403 308
"Space" waste fitting without overflow*
Code
8403 008
*"Space" waste fitting without overflow
can be used in all sinks equipped
with 3" 1/2 drain
"Space" automatic waste fitting is a useful
complement with a plain and accurate design in
every detail: the right fitting for our most presigious
sink series.
106
The elegant steel cap closes tightly the drain and
leaves no visible residues collected in the basket
below.
Designed for deep bowls, Space has a very small
encumbrance. In the drawing the side view of the
Space is shown. The height of the compact drain
and the conformation of the siphon optimize the area
under the sink leaving the necessary space for the
needs of separate waste collecting.
"Space" is equipped with the original perimetric
overflow that enhances the bowl. Please check if
available for the chosen sink.
Complements
Automatic waste fitting
PR
Waste fitting with round remote
control and with overflow
Code
8407 100
Waste fitting with round remote
control and without overflow
Code
Undermount
Sinks
8407 000
PQ
Premium waste fitting with squared
remote control and with overflow
Code
8407 102
PC
Premium waste fitting with cubic remote
control (push-pull) and with overflow
Code
8407 103
Notes on compatibility of automatic drains
Automatic drains are compatible with sinks that are
supplied with at least one second hole (in addition
to the tap hole).
For many sinks this is not a standard feature
but it can be requested when ordering it. In the
sinks drawings standard holes are shown with a
continuous line, while positions for any holes on
request are shown with a dashed line (see example
aside).
Second and third tap hole available
The automatic drains presented on this page are all
interchangeable.
In the sinks already equipped with automatic drain,
where not expressly stated otherwise, the PR drain
(code 8407 100) is meant.
The SPACE automatic drain (see p. 106) is not
interchangeable with others, because of the
different geometry of the overflow, as specified in
the sinks series requiring this drain type.
For undermount sinks the possibility of insertion of
the automatic drain is always shown because the
hole can be positioned on the worktop.
107
Complements
3”½ Waste
fittings
Code
2” Waste
"Space" waste fitting
without overflow
8403 000
Basket waste fitting
without overflow
Basket waste fitting
with perimetric overflow
8403 300
Basket waste fitting
with overflow
8407 200
Waste fitting for
Uragano sink
(overflow with flexible
pipe)
Code
Description
8403 001
Premium Basket waste
fitting without overflow
8403 301
Premium Basket waste
fitting with overflow
8405 300
2” waste fitting without
overflow and rubber
plug
Description
Overflow fitting 1”¼
for drainer
fitting
Code
8403 309
108
One 2” waste fitting
with overflow and one
2” waste fitting without
overflow
fitting
8404 000
One way siphon
with dishwasher socket
8415 000
Two ways siphon
with dishwasher socket
8435 000
Two way “Spazio” siphon
with dishwasher socket
8433 000
Three way “Spazio” siphon
with dishwasher socket
Code
Description
8435 001
Premium* one way
"Spazio" siphon
with dishwasher socket
8435 002
Premium* two way
"Spazio" siphon
with dishwasher socket
Description
2” waste fitting with
overflow and rubber
plug
Code
8410 000
* we recommend combining Premium siphons and waste fittings
8401 000
8402 000
Description
Premium siphons
waste fittings
fittings
1”¼ Waste
Code
"Space" waste fitting
with perimetric overflow
8403 303
Code
7” Waste
Description
8403 008
8403 308
3”½ Premium
Siphon
Various
Code
8660 000
Stainless steel tap's hole Ø 35 mm cover
8669 000
2” rubber plug
8669 001
Strainer plug for 3”½ waste fitting
8669 002
Strainer plug for 3”½ automatic
waste fitting
8669 003
Strainer plug for Premium 3”½ waste fitting
8669 004
Strainer plug for Premium 3”½ automatic
waste fitting
8155 000
Steel-clad plug 18/10 for waste bins
Code 8113-8123
8118 006
Connecting pipe - (black)
for waste disposal unit Code 8113-8123
8700 007
Silicone gasket for inset sinks
(4 and 8 mm)
8700 062
Silicone gasket for flat-edge
and flush-mount inset sinks
8700 080
Fixing brackets adapter kit (18)
to be used for worktops 20 mm
Description
7” waste fitting with
overflow and st. steel
basket
Description
Undermount
Sinks
How to clean steel
Stainless steel products do not need any particular servicing. However, they do require a certain care and use of adequate
detergents for daily cleaning. By and large, all that’s needed is to wash with hot water and soap, and thoroughly rinse and dry
with a cloth. Do not use: hydrochloric acid, abrasive powders, steel wool, brushes and products for cleaning silver.
When it comes to detergents for cleaning steel, Foster recommends the products in the “Steel Clean” line:
-
all-purpose aerosol for daily cleaning use
-
microfiber cloth to wipe off traces of grease and powder.
-
professional cream to restore the original splendour of the steel, remove scaling, stubborn dirt and rust marks caused
by contact with ferrous materials.
Steel Clean - cream
Detergent cream for stainless steel
Steel Clean - microfiber
Microfiber cloths for cleaning stainless
steel
250 ml bottle
pack of 3 pcs.
Code
Code
8331 000
8333 000
pack of 12 pcs.
12 pack of 3 pcs.
Code
Code
8331 012
8333 012
Steel Clean - all-purpose
All-purpose detergent with vaporizer
500 ml bottle
Steel Clean - kit
Steel cleaning kit containing:
- 1 bottle containing 250 ml of cream
- 1 bottle containing 500 ml of
all-purpose fluid
- 1 pack of 3 microfiber cloths
Code
8332 000
pack of 12 pcs.
cleaning kit
Code
Code
8332 012
8339 000
109
110
Mixer Taps
Kelvin page 114
Tre basso page 122
F2000 basso page 128
Minimal
plus page 115
Arsenio page 123
GF page 129
Minimal page 116
Flat page 123
S1000 - Z66 page 129
Camillo page 116
Ellis page 124
MS page 130
Spring page 117
Luisa page 124
S1000 - Z65 page 130
Flexo page 117
NYC page 125
S1000 - Z85 page 131
Magnum page 118
Lorenzo page 126
MC page 131
Play page 119
Peppone page 126
LO page 132
1/2 Circle page 120
KS page 127
Elettra page 132
Geo page 121
Gamma page 127
S1000 - RO page 133
Tre alto page 122
F2000 alto page 128
Dispenser page 133
Mixer Taps
The wide range of Foster mixer taps completes the washing area according
to the sinks stainless steel finish and style.
111
Features
Foster offers a complete and varied collection of mixer taps both for their aesthetics and functional characteristics, and able
to give added value to the wide range of sinks. The essential and modern design of squared proposals are are laternative to
more traditional models with soft and sinuous aesthetic. The remote controls and dispensers (see Sink Accessories section),
reproduce perfectly the design of mixer taps, creating sets of high aesthetic value.
Quality materials
Foster mixer taps meet the strictest regulations. Certified materials with very low lead content and flexible ceramic cartridges
tested at very high pressures provide high sturdyness, an always smooth and precise working and, most of all, full safety.
170°
112
Double water flow
Several models are equipped with a switch
to easily change the flow from continuous to
shower.
Extractable shower head
The head of the tap is extractable, in order to
easily reach any area of the sink.
Tap rotation
All the taps have a wide angle of rotation.
Some models even permit a full 360° rotation.
Strenghtening plate
Foster's mixer taps are equipped with the
strenghtening plate that offers perfect
stability on any sink.
Special solutions
The mixer tap has to be matched with the sink. The number and dimension of the bowls requires an appropriate choice which
ensures full functionality in every situation. That is why Foster offers a wide range of mixer taps different for barrel height, rotation, command position and many models with extractable shower head, to simplify the choice that best suits your needs.
Below are described some "special solutions" for special situations... and for the most demanding customers.
Mixer Taps
Kelvin is an innovative mixer tap, sporting an illuminated water flow, which changes colour
according to the temperature: blue for cold water, red for hot water, violet if mixed. No
electrical connection is required, being the water itself that, flowing through two small
turbines, powers the illumination LEDS. Thanks to the visual temperature
control, useless water waste and also burnings by hot water can be avoided.
The system is enclosed in a small box (16x12x8 cm) easily tucked away in
the under-sink cabinet.
Arsenio and Flat are two ideal "under-window" solutions. The barrel can be easily lowered
to reduce the height of the tap to just a few centimetres.
Magnum mixer tap is ideally suited for a professional use. The flexible hose makes it
possible to reach every corner of the sink and the lever positioned directly on the shower
makes it extra-easy to control the water flow.
Play offers a particular appealing aesthetic with its big arch. The mixer shower can be tilted
and the waterflow directed where needed.
113
Kelvin
170°
Single-lever mixer tap with rotating
barrel, extractable shower-head and
temperature-controlled
illuminated
water-flow. The LED-generated colour
changes from red to blue.
Packing: 800x330x90 mm 4,9 kg
114
strenghtening plate is included
hole for tap's building-in: ø 35 mm
built-in base: ø 50 mm
rotating angle: 170°
ceramic disc cartridge
max worktop thickness: 40 mm
Code
8470 000
chromed
Mixer Taps
Minimal plus
Single lever mixer tap with rotating barrel and separate rinsing-shower (double hole needed, maximum distance
between the holes 500 mm)
strenghtening plate is included
hole for tap's building-in: ø 35 mm
double hole needed, distance
between the holes:
max 500 mm - min. 85 mm
built-in base: ø 50 mm
rotating angle: 360°
ceramic disc cartridge
max worktop thickness: 45 mm
rear encumbrance of control
leverage: 40 mm
Code
8474 100
satin finish
Packing: 700x280x60 mm 3,5 kg
115
Minimal
140°
Single lever mixer tap with rotating
barrel and extractable shower head
with double water-flow.
strenghtening plate is included
hole for tap's building-in: ø 35 mm
built-in base: ø 50 mm
rotating angle: 140°
ceramic disc cartridge
max worktop thickness: 45 mm
rear encumbrance of control
leverage: 40 mm
Code
8473 000
chromed
Packing: 740x300x70 mm 3,4 kg
Camillo
170°
Single lever mixer tap with rotating
barrel and extractable shower head.
strenghtening plate is included
hole for tap's building-in: ø 35 mm
built-in base: ø 48 mm
rotating angle: 170°
ceramic disc cartridge
max worktop thickness: 40 mm
Code
8467 000
chromed
8467 100
satin finish
Packing: 800x330x90 mm 3,5 kg
116
Prezzo €
Spring
Single lever mixer tap with rotating
barrel and extractable shower head.
strenghtening plate is included
hole for tap's building-in: ø 35 mm
built-in base: ø 45 mm
rotating angle: 140°
ceramic disc cartridge
max worktop thickness: 55 mm
rear encumbrance of control
leverage: 80 mm
strenghtening plate is included
hole for tap's building-in: ø 35 mm
built-in base: ø 51 mm
rotating angle: 360°
ceramic disc cartridge
max worktop thickness: 40 mm
Mixer Taps
140°
Code
8472 000
chromed
Packing: 690x290x120 mm 4,4 kg
Flexo
Single lever mixer tap with rotating
barrel and flexible head
Code
8456 000
chromed
Packing: 500x310x90 mm 3 kg
117
Single lever mixer tap with rotating
barrel and movable shower
Packing: 520x310x80 mm 3,5 kg
118
245
190
580
Magnum
strenghtening plate is included
hole for tap's building-in: ø 35 mm
rotating angle: 360°
ceramic disc cartridge
max worktop thickness: 50 mm
rear encumbrance of
control leverage: 50 mm
Code
8484 000
chromed
Mixer Taps
Play
Single lever mixer tap with rotating
barrel.
strenghtening plate is included
hole for tap's building-in: ø 35 mm
built-in base: ø 50 mm
rotating angle: 360°
ceramic disc cartridge
max worktop thickness: 40 mm
rear encumbrance of control
leverage: 40 mm
Code
8487 000
chromed
Packing: 800x330x90 mm 2,8 kg
119
1/2 Circle
Single lever mixer tap with rotating
barrel. New version with aerator.
Packing: 500x310x90 mm 2,3 kg
120
NEW
strenghtening plate is included
hole for tap's building-in: ø 35 mm
built-in base: ø 50 mm
rotating angle: 360°
ceramic disc cartridge
max worktop thickness: 40 mm
rear encumbrance of control
leverage: 40 mm
Code
8480 000
chromed
Mixer Taps
Geo
Single lever mixer tap with rotating
barrel.
strenghtening plate is included
hole for tap's building-in: ø 35 mm
built-in base: ø 55 mm
rotating angle: 360°
ceramic disc cartridge
max worktop thickness: 40 mm
Code
8454 000
chromed
Packing: 500x310x90 mm 3 kg
121
Tre Alto
120°
Single lever mixer tap with rotating
barrel.
strenghtening plate is included
hole for tap's building-in: ø 35 mm
built-in base: ø 52 mm
rotating angle: 120°
ceramic disc cartridge
max worktop thickness: 40 mm
Code
8468 000
chromed
Packing: 500x310x90 mm 4,2 kg
Tre Basso
120°
Single lever mixer tap with rotating
barrel.
strenghtening plate is included
hole for tap's building-in: ø 35 mm
built-in base: ø 55 mm
rotating angle : 120°
ceramic disc cartridge
max worktop thickness: 40 mm
Code
8457 000
chromed
Packing: 500x310x90 mm 3,1 kg
122
Arsenio
024
207
052
64
042
052
Single-lever mixer tap with rotating,
collapsible
barrel
(Up&Down),
with
extractable head and remote control
(double hole needed, maximum distance
between the holes 500 mm).
strenghtening plate is included
hole for tap's building-in: ø 35 mm
double hole needed, distance
between the holes:
max 500 mm - min. 85 mm
built-in base: ø 52 mm
rotating angle: 360°
ceramic disc cartridge
max worktop thickness: 40 mm
strenghtening plate is included
hole for tap's building-in: ø 35 mm
double hole needed, distance
between the holes:
max 500 mm - min. 85 mm
built-in base: ø 52 mm
rotating angle: 360°
ceramic disc cartridge
max worktop thickness: 40 mm
Mixer Taps
035
Code
8471 000
chromed
Packing: 500x310x90 mm 3,2 kg
Flat
NEW
Single-lever mixer tap with rotating,
collapsible barrel (Up&Down), with remote
control (double hole needed, maximum
distance between the holes 500 mm).
Code
8478 000
chromed
Packing: 500x310x90 mm 3,2 kg
123
Ellis
120°
Single lever mixer tap with
rotating barrel and extractable
shower head.
strenghtening plate is included
hole for tap's building-in: ø 35 mm
built-in base: 66x46 mm
rotating angle: 120°
ceramic disc cartridge
max worktop thickness: 40 mm
Code
8463 000
chromed
Packing: 500x260x100 mm 4,2 kg
Luisa
Single lever mixer tap with
rotating barrel and extractable
shower head.
Packing: 490x260x90 mm 3,1 kg
124
strenghtening plate is included
hole for tap's building-in: ø 35 mm
built-in base: ø 50 mm
rotating angle: 360°
ceramic disc cartridge
max worktop thickness: 40 mm
rear encumbrance of control
leverage: 50 mm
Code
8482 000
chromed
Mixer Taps
NYC
Single lever mixer tap with
rotating barrel.
strenghtening plate is included
hole for tap's building-in: ø 35 mm
built-in base: ø 50 mm
rotating angle: 360°
ceramic disc cartridge
max worktop thickness: 40 mm
rear encumbrance of control
leverage: 40 mm
Code
8486 000
chromed
Packing: 490x260x90 mm 2,1 kg
125
Lorenzo
120°
Single lever mixer tap
with rotating barrel and
extractable shower head.
strenghtening plate is included
hole for tap's building-in: ø 35 mm
built-in base: ø 48 mm
rotating angle: 120°
ceramic disc cartridge
max worktop thickness: 40 mm
Code
8466 000
chromed
8466 100
satin finish
Packing: 490x260x90 mm 2,9 kg
Peppone
120°
Single lever mixer tap
with rotating barrel and
extractable shower.
Packing: 490x260x90 mm 2,5 kg
126
strenghtening plate is included
hole for tap's building-in: ø 35 mm
built-in base: ø 48 mm
rotating angle: 120°
ceramic disc cartridge
max worktop thickness: 40 mm
Code
8465 000
chromed
Single lever mixer tap with
rotating barrel.
strenghtening plate is included
hole for tap's building-in: ø 35 mm
built-in base: ø 50 mm
rotating angle: 360°
ceramic disc cartridge
max worktop thickness: 50 mm
Mixer Taps
KS
Code
8485 000
chromed
Packing: 280x270x90 mm 1,9 kg
Gamma
180°
Single lever mixer tap with
rotating barrel and extractable
shower head.
strenghtening plate is included
hole for tap's building-in: ø 35 mm
built-in base: ø 50 mm
rotating angle: 180°
ceramic disc cartridge
max worktop thickness: 30 mm
Code
8483 000
chromed
Packing: 520x310x80 mm 3,4 kg
127
F2000 - Alto
Single lever mixer tap with rotating
barrel.
strenghtening plate is included
hole for tap's building-in: ø 35 mm
built-in base: ø 50 mm
rotating angle: 360°
ceramic disc cartridge
max worktop thickness: 55 mm
rear encumbrance of control
leverage: 40 mm
Code
8458 000
chromed
Packing: 410x280x80 mm 2,3 kg
F2000 - Basso
180°
Single lever mixer tap with rotating
barrel and extractable shower.
strenghtening plate is included
hole for tap's building-in: ø 35 mm
built-in base: ø 60 mm
rotating angle: 180°
ceramic disc cartridge
max worktop thickness: 50 mm
Code
8459 000
chromed
8459 100
Packing: 520x310x80 mm 3 kg
128
satin finish
Single lever mixer tap with rotating
barrel.
strenghtening plate is included
hole for tap's building-in: ø 35 mm
built-in base: ø 53 mm
rotating angle: 360°
ceramic disc cartridge
max worktop thickness: 30 mm
Mixer Taps
GF
Code
8452 000
chromed
Packing: 500x310x90 mm 2,6 kg
S1000 - Z66
Single lever mixer tap with rotating
barrel and extractable shower.
strenghtening plate is included
hole for tap's building-in: ø 35 mm
built-in base: ø 55 mm
rotating angle: 360°
ceramic disc cartridge
max worktop thickness: 55 mm
rear encumbrance of control
leverage: 60 mm
Code
8448 500
chromed
Packing: 420x280x90 mm 3,1 kg
129
MS
170°
Single lever mixer tap with rotating
barrel and extractable shower.
strenghtening plate is included
hole for tap's building-in: ø 35 mm
built-in base: ø 50 mm
rotating angle: 170°
ceramic disc cartridge
max worktop thickness: 40 mm
Code
8445 000
chromed
8445 800
satin finish
Packing: 310x300x100 mm 2,7 kg
S1000 - Z65
180°
Single lever mixer tap with rotating
barrel and extractable shower.
strenghtening plate is included
hole for tap's building-in: ø 35 mm
built-in base: ø 55 mm
rotating angle: 180°
ceramic disc cartridge
max worktop thickness: 45 mm
Code
8449 500
chromed
Packing: 390x210x90 mm 2,2 kg
130
Single lever mixer tap with
rotating barrel.
strenghtening plate is included
hole for tap's building-in: ø 35 mm
built-in base: ø 48 mm
rotating angle: 360°
ceramic disc cartridge
max worktop thickness: 55 mm
Mixer Taps
S1000 - Z85
Code
8442 500
chromed
Packing: 420x280x80 mm 2 kg
MC
Single lever mixer tap with rotating
barrel.
strenghtening plate is included
hole for tap's building-in: ø 35 mm
built-in base: ø 45 mm
rotating angle: 360°
ceramic disc cartridge
max worktop thickness: 40 mm
Code
8446 000
chromed
Packing: 280x270x90 mm 1,8 kg
131
LO
Single lever mixer tap with rotating
barrel.
Design: Lucci & Orlandini.
strenghtening plate is included
hole for tap's building-in: ø 35 mm
built-in base: ø 50 mm
rotating angle: 360°
ceramic disc cartridge
max worktop thickness: 35 mm
Code
8444 000
chromed
Packing: 370x160x70 mm 2 kg
Elettra
NEW
Single lever mixer tap with rotating
barrel.
strenghtening plate is included
hole for tap's building-in: ø 35 mm
built-in base: ø 58 mm
rotating angle: 360°
ceramic disc cartridge
max worktop thickness: 55 mm
Code
8476 000
chromed
Packing: 420x280x80 mm 2,2 kg
132
strenghtening plate is included
hole for tap's building-in: ø 35 mm
built-in base: ø 50 mm
Single lever mixer tap with
rotating barrel.
rotating angle: 360°
ceramic disc cartridge
max worktop thickness: 55 mm
Mixer Taps
S1000 - RO
Code
8443 002
chromed
Packing: 310x190x80 mm 1,4 kg
Dispenser Quadra
Dispenser Round
Chromed steel built-in liquid
soap/detergent dispenser
Chromed steel built-in liquid
soap/detergent dispenser
Code
8520 000
NEW
Code
8530 000
133
134
Dishwashers
Dishwasher
Low consumption of energy and water, respect for the quality of home
life and high performance.
These are the values of the new Foster dishwashers. An easy but
complete range of solutions for every space and washing need, all of
them in A Class.
S4000 page 139
S4000 Compact page 140
KS 60 page 142
KS 45 page 142
135
136
High performance with
respect for the environment
Modular Range
The range of Foster solutions covers
every need of washing and space in the
kitchen. Besides classic models, with
capacity up to 13 place-setting, there are
also the slim dishwasher for a cabinet of
45 cm, and the particular compact builtin S4000, for a perfect modular match
with the ovens of the same collection.
Total safety
Foster dishwashers are equipped with
various safety systems that are activated
in case of leaks under the appliance or
failure in emptying the tank.
In all models, the pipe supplied is
equipped with Acquastop valve that
shuts off water supply directly at the tap
if faults occur.
Reduced consumption
In Foster dishwashers performance and
low power consumption coexist without
compromises.
The wide range of programs always
allows to choose among quick washes
with very low energy and water
consumption, up to 8 liters per cycle.
Perfect drying
Even in the delicate function of drying
excellent performances are achieved.
The
advanced
ventilation
and
condensation systems ensure perfectly
dry dishes at a contained temperature
immediately after the end of the cycle.
Extra Capacity
The loading capacity of a dishwasher
is given not only by its volume but also
to devices and solutions that can fit the
space. In Foster dishwashers, thanks to
the adjustable upper basket, the sliding
cutlery basket and the foldable combs,
space is always according to needs.
Quality of life
Low noise is a key feature of a
dishwasher.
All Foster models respect the silence
of your kitchen. Thanks to the special
acoustic insulation, the S4000 fully
built-in dishwasher reaches 45 dB(A) in
sound pressure.
Dishwasher
Low consumption of energy and water, respect for the quality of home life and high
performance. These are the values of the new Foster dishwashers. An easy but
complete of solutions for every space and washing need, that reach the A++ class,
conforming to new european regulation.
137
S4000
Advanced electronics and many
technical
solutions
make
Foster
dishwashers particularly flexible, with
excellent performance in any situation.
The S4000 fully built-in dishwasher
is equipped with the exclusive DCS
system (Dirt Control System) setting
the washing parameters according to
the degree of dirt, always optimizing the
result.
Features
Programs: Foster S4000 dishwasher have 7
different washing programs for the utmost in
versatility.
Intensive:
Normal:
Delicate:
Auto:
Bio:
Quick:
Soaking:
washing at 70°C for heavily soiled plates and pans.
washing at 65°C for normally soiled crockery.
washing at 40°C for delicate/slightly soiled crockery.
optimizes both results and consumption to suit the load.
50°C economy wash. Optimized consumption.
ideal for small loads. Washes and dries in just 30 min.
rinses the crockery while waiting to be washed.
Acquastop: stops the water supply and prevents
leaks and overflows at source. It is a standard
equipment on all models.
Energy class: the exceptional energy and water
savings puts the S4000 dishwasher directly in
class A++.
Active Drying System: a unique system exploits
the double principle of condensation and ventilation
ensuring always brilliant results.
Water saving: S4000 is particularly attentive to
the consumption of such a valuable resource.
Less than 10 liters of water are required for a
complete washing cycle.
Plates XXL: the large capacity of the lower rack
is capable of plates up to 33 cm diameter, also
suitable for serving dishes and special pizzadishes.
Asymmetric sprinkler:
the unique three-arm asymmetric of
S4000 dishwasher sprinkle system
distributes the water in order to ensure
optimal cleaning performance in every
point.
138
Dirt Control System: can be activated with the
Intense, Normal and Delicate programs, it allows
to further customize the settings according to the
degree of dirt on dishes.
Adjustable basket:
the upper basket is simple to adjust in
height, even when fully loaded. This
allows better space management
according to washing needs.
Frontal dispenser:
located on top front of the trolley, is
equipped with a double compartment
for liquid detergents and multi-purpose
pads and improves the accessibility and
ease of use.
S4000
S4000 60 cm - fully built-in dishwasher
Code
fully built-in dishwasher
2910 010
Door cladding kit
in brushed finish stainless steel
(71,6x59,5x2 cm)
2910 001
1-12 hour delayed programming
Remaining wash time indication
Setting for all-purpose detergents
Low salt-rinsing agent indicators
Upper basket adjustable in height at
full load, also for 33 cm pizza dishes
Adjustable cutlery basket
Goblet support
Frontal adjustment of rear feet
Dishwasher
Energy class A++
Place-setting capacity 13
45 dB(A) sound power
as per EN 704-3
Electronic programming
Touch-control digital panel
7 washing programs: intensive,
normal, delicate, auto, bio, quick, soaking
Dirt Control System (DCS)
Active Drying System (ADS)
Acquastop safety system
7
Technical data
voltage rating: 230 V - 50 Hz
total power: 2.000-2.150 W
heating power: 1.900 W
water consumption per cycle: 9,9 litres
Door panel dimension limits:
thickness 16-24 mm
height 642-730 mm
* Feet adjustement 0-70 mm
Packing: 660x675x890 mm - 46 Kg
139
S4000
140
S4000
S4000 Compact - 60x46 - built-in
Code
compact built-in dishwasher
2946 000
Energy class A
Drawer opening
Place-setting capacity 6
51 dB(A) sound power as per EN 704-3
Electronic programming
Touch-control digital panel
5 washing programs: intensive,
normal, delicate, bio, quick.
Acquastop safety system
1-9 hour delayed programming
Remaining wash time indication
Setting for all-purpose detergents
Low salt-rinsing agent indicators
Goblet support
Dishwasher
5
Technical data
max door opening: 420 mm
voltage rating: 230 V - 50 Hz
total power: 1.580 W
heating power: 1.500 W
water consumption per cycle: 8 litres
cut-out: 560x450 mm
Packing: 720x680x590 mm - 46 Kg
A dishwasher
where never seen before
Series 4000 has been enriched with a new gem. The
compact built-in dishwasher, thanks to its small size
fits in any space: in suspended kitchens, or even in
column together with coordinated ovens, for surprisingly
aesthetical matchings.
141
KS
Features
Programs: Foster KS dishwashers have 8
different washing programs for the utmost in
versatility.
Intensive: washing at 70°C for heavily soiled plates and pans.
Daily Clean: washing at 60°C for normally soiled crockery.
Delicate:
washing at 40°C for delicate/slightly soiled crockery.
Auto:
optimizes both results and consumption to suit the load.
Bio:
50°C economy wash. Optimized consumption.
Baby Care: intense 70 °C washing, for maximum hygiene
Quick:
ideal for small loads. Washes and dries in just 30 min.
Soaking:
rinses the crockery while waiting to be washed.
Sliding Basket:
the cutlery basket can slide on the
comb rack for perfect freedom in space
management.
142
Daily Clean: for medium dirty dishes, it is the
perfect program for daily use, with record washing
time of less than one hour.
Active Drying System: a unique system exploits
the double principle of condensation and ventilation
ensuring always brilliant results.
Half Load: saving time and energy with the halfload setting. Available on all programs.
Baby-Care Program:
combines intense washing with a rinsing
at high temperature, for a total hygiene
guarantee. An additional basket is designed
just for children cutlery and utensils.
Multiple shelves:
the shelves of the upper basket are
divided to collect simultaneously
glasses and cups of different sizes.
KS
KS 60
Code
fully built-in dishwasher
2940 000
Energy class A
Place-setting capacity 12
48 dB (A) sound power as per EN 704-3
Electronic programming
Digital panel
8 washing programs: intensive,
daily clean, delicate, auto, bio, quick,
soaking, baby care
Half-load function for all programs
Active Drying System (ADS)
Acquastop safety system
1-9 hour delayed programming
Remaining wash time indication
Setting for all-purpose detergents
Low salt-rinsing agent indicators
Upper basket adjustable in height
at full load
Adjustable cutlery basket
Goblet support
Frontal adjustment of rear feet
Technical data
voltage rating:
220-240 V - 50Hz
total power: 2.200 W
heating power: 2.000 W
water consumption per cycle:13 litres
8
KS 45
Dishwasher
Door panel dimension limits:
thickness 16-24 mm
height 630-715 mm
* Feet adjustement 0-50 mm
Packing: 650x650x850 cm - 44 Kg
Code
fully built-in dishwasher
2945 000
Energy class A
Place-setting capacity 10
49 dB (A) sound power as per EN 704-3
Electronic programming
Digital panel
8 washing programs: intensive,
daily clean, delicate, auto, bio,
quick, soaking, baby care
Half-load function for all programs
Acquastop safety system
1-9 hour delayed programming
Remaining wash time indication
Setting for all-purpose detergents
Low salt-rinsing agent indicators
Upper basket adjustable in height
at full load
Adjustable cutlery basket
Goblet support
Frontal adjustment of rear feet
Technical data
voltage rating:
220-240 V - 50 Hz
total power: 2.200 W
heating power: 2.000 W
water consumption per cycle: 12 litres
Door panel dimension limits:
thickness 16-24 mm
height 630-715 mm
* Feet adjustement 0-50 mm
8
Packing: 650x500x850 cm - 37 Kg
143
Download PDF