install guide - Purcell Murray

install guide - Purcell Murray
INSTALL GUIDE
®
3000 Series - 18” & 36” Models
The Built-In Undercounter Leader Since 1962
U-LINE.COM
1 Table of Contents
Safety Precautions
Safety Alert Definitions ........................................................................................................................................ 1
General Precautions.............................................................................................................................................. 1
Inspect & Plan
Product Registration ............................................................................................................................................. 2
Product Description.............................................................................................................................................. 2
Tools / Material Required .................................................................................................................................... 2
Exterior Cleaning................................................................................................................................................... 2
Prepare Site
Electrical Specifications......................................................................................................................................... 3
Cut-Out Dimensions ............................................................................................................................................ 3
3018 Series ................................................................................................................................................... 3
3036 Series ................................................................................................................................................... 3
Product Dimensions
3018 & 3036 Series .................................................................................................................................... 4
Door Swing Dimensions
Other Site Requirements..................................................................................................................................... 5
Side-By-Side Installation ............................................................................................................................ 5
Power Supply ............................................................................................................................................... 5
Environmental Requirements................................................................................................................... 5
3000 Series Doors
Door Alignment and Adjustment....................................................................................................................... 6
3000 Series Overlays
Overlay / Frame Overlay Panel .......................................................................................................................... 7
Panel Preparation........................................................................................................................................ 7
Panel Installation ......................................................................................................................................... 7
Overlay Grille ......................................................................................................................................................... 8
Preparing The Overlay .............................................................................................................................. 8
3000 Series Anti-Tip Bracket
Anti-Tip Brackets Installation............................................................................................................................10
Level & Install
Leveling Information............................................................................................................................................12
Installation..............................................................................................................................................................12
Relocating the Shelves ............................................................................................................................. 12
Installation Troubleshooting................................................................................................................... 12
2 Safety Precautions
General Precautions
IMPORTANT
• PLEASE READ all instructions before installing,
operating, or servicing the appliance.
• Proper installation procedures must be followed when
completing an installation or relocation of a unit.
Consult the installation guide before any installation
begins. U-Line contact information appears on the rear
cover of this guide.
• This unit requires connection to a dedicated 15 Amp
grounded (three-prong), polarized receptacle, installed
by a qualified electrician, compliant with applicable
electrical codes.
Safety Alert Definitions
Throughout this guide are safety items labeled with a Danger,
Warning or Caution based on the risk type:
Use this appliance for its intended purpose only and follow these
general precautions with those listed throughout this guide:
DANGER
RISK OF CHILD ENTRAPMENT. Before you throw away your
old refrigerator or freezer, take off the doors and leave shelves
in place so children may not easily climb inside.
WARNING
SHOCK HAZARD - Electrical Grounding Required.
• Never attempt to repair or perform maintenance on
the unit until the electricity has been disconnected.
• Never remove the round grounding prong from the
plug and never use a two-prong grounding adaptor.
• Altering, cutting of power cord, removal of power
cord, removal of power plug, or direct wiring can
cause serious injury, fire and or loss of property and
or life, and will void the warranty.
• Never use an extension cord to connect power to the
unit.
• Always keep your working area dry.
WARNING
DANGER
Danger means that failure to follow this safety statement will
result in severe personal injury or death.
Install provided Anti-Tip kit on all Wine Captain
Models and Glass Door Refrigerators. Serious personal
injury could occur.
CAUTION
WARNING
• Use care when moving and handling the unit. Use gloves
to prevent personal injury from sharp edges.
• If your model requires defrosting, DO NOT use an ice
pick or other sharp instrument to help speed up
defrosting. These instruments can puncture the inner
lining or damage the cooling unit. DO NOT use any type
of heater to defrost. Using a heater to speed up
defrosting can cause personal injury and damage to the
inner lining.
Warning means that failure to follow this safety
statement could result in serious personal injury,
property or equipment damage.
CAUTION
Caution means that failure to follow this safety statement
may result in minor or moderate personal injury, property
or equipment damage.
IMPORTANT
• Do not lift unit by door handle.
• Never install or operate the unit behind closed doors.
Be sure front grille is free of obstruction. Obstructing
free airflow can cause the unit to malfunction and will
void the warranty.
• Failure to clean the condenser every six months can
cause the unit to malfunction. This could void the
warranty.
• Allow unit temperature to stabilize for 24 hours before
use.
• Do not Block any internal Fans
Use only genuine U-Line replacement parts. Imitation
parts can damage the unit, affect its operation or
performance and may void the warranty.
U-Line Safety Precautions
1
Tools / Material Required
3 Inspect & Plan
• Screwdrivers — slotted, Phillips, and T-25 Torx head
Exterior Cleaning
IMPORTANT
Product Registration
You have received a carton containing your 3000 series unit with a
package inside containing a Use and Care Guide and a Product
Registration Card. Please complete and mail the Product
Registration Card or register online at www.U-LineService.com.
Once your unit is installed, keep the Use and Care Guide and this
Installation Guide in a safe place for future reference.
Product Description
This installation guide covers the following models.
Stainless door panels, handles and frames can discolor
when exposed to chlorine gas, pool chemicals, salt water
or cleaners with bleach.
• Keep your Stainless unit looking new by cleaning with a good
quality all-in-one stainless steel cleaner/polish on a monthly
basis. For best results use Claire Stainless Steel Polish and
Cleaner, which can be purchased from U-Line Corporation
(Part numbers 173348). Frequent cleaning will remove surface
contamination that could lead to rust. Some installations may
require cleaning on a weekly basis.
• Do not clean with steel wool or abrasive pads.
U-3018RGLOL-00
U-3018WCS-00
U-3018RGLOL-01
U-3018WCS-01
U-3018RGLS-00
U-3036RRGLOL-00
U-3018RGLS-01
U-3036RRGLS-00
U-3018RFOL-00
U-3036BVWCOL-00
U-3018RFOL-01
U-3036BVWCS-00
U-3018RFS-00
U-3036WCWCOL-00
U-3018RFS-01
U-3036WCWCS-00
U-3018WCOL-00
U-3036RRS-00
U-3018WCOL-01
U-3036RROL-00
• Do not use cleaners that are not specifically intended
for stainless steel on stainless surfaces (this includes
glass, tile and counter cleaners).
• If any surface discolors or rust appears, clean it quickly with
Bon-Ami or Barkeepers Friend Cleanser and a non-abrasive
cloth. Always clean in the direction of the grain. Always finish
this process with Claire Stainless Steel Polish and Cleaner or
comparable product to prevent further problems.
• Glass surfaces may be cleaned with standard household window
cleaners.
WARNING
Rust that is allowed to linger can penetrate into the
surface of the stainless steel and complete removal of
the rust may not be possible.
Inspection
Unwrap and inspect the unit on a flat, level surface capable of
supporting it’s entire weight. If necessary, remove protective film
from Stainless Steel models.
U-Line Inspect & Plan
2
4 Prepare Site
Your U-Line product has been designed exclusively for a built-in
installation. When built-in, your unit does not require additional air
space for top, sides, or rear. However, the front grille must NOT
be obstructed and clearance is required for an electrical
connection in the rear.
Cut-Out Dimensions
3018 Series
Follow the cut-out drawing. The 18" width allows for ease in
installation and removal of the unit. 24" is the cabinet depth in
most installations.
IMPORTANT
• Unit can NOT be installed behind a closed cabinet door.
Electrical Specifications
WARNING
SHOCK HAZARD — Electrical Grounding Required.
• Never remove the round grounding prong from the
plug and never use a two-prong grounding adapter.
• Never use an extension cord to connect power to the
unit.
33-5/8"
to
34-7/8"
24"
7"
4"
IMPORTANT
Electrical installation must observe all state and local
codes. This unit requires connection to a grounded (threeprong), polarized receptacle that has been placed by a
qualified electrician.
The unit requires a grounded and polarized 115 VAC, 60 Hz, 15A
power supply (normal household current). An individual, properly
grounded branch circuit or circuit breaker is recommended. GFCI
(ground fault circuit interrupter) is usually not required for fixed
location appliances and is not recommended for your unit because
a GFCI could be prone to nuisance tripping. However, be sure to
consult your local codes.
18"
3036 Series
Follow the cut-out drawing. The 35 11/16" width allows for ease in
installation and removal of the unit. 24" is the cabinet depth in
most installations.
See below for recommended receptacle location
24"
33-5/8"
to
34-7/8"
7"
4"
35 11/16"
U-Line Prepare Site
3
3018 & 3036 Series
5 Product Dimensions
3018 Series
3036 Series
22-11/16”
22-11/16”
33-11/16”
To
34-11/16”
33-11/16”
To
34-11/16”
4-3/4” To 5-3/4”
17-3/4”
35-7/16”
4-3/4” To 5-3/4”
Glass And Solid Overlay
Glass & Solid Overlay
23-7/16”
23-7/16”
33-11/16”
To
34-11/16”
33-11/16”
To
34-11/16”
3-5/8” To 4-5/8”
17-3/4”
35-7/16”
3-5/8” To 4-5/8”
Stainless Steel Glass Door
Stainless Steel Overlay Door
23-7/16”
23-7/16”
33-11/16”
To
34-11/16”
33-11/16”
To
34-11/16”
3-5/8” To 4-5/8”
35-7/16”
17-3/4”
3-5/8” To 4-5/8”
Stainless Steel Overlay Door
Stainless Steel Solid Door
Product Dimensions
4
Other Site Requirements
6 Door Swing Dimensions
Side-By-Side Installation
Units have a zero clearance for the door to open 90°. Overlay
models will need additional space for any knobs or pulls installed
on the overlay panel / frame. Stainless Steel models require 2”
door clearance to accommodate the handle if installed next to a
wall.
Wall
Cut-out width for a side-by-side installation is the total of the
widths listed under Cut-Out Dimensions in each unit’s Installation
Guide.
No trim kit is required. However, a 1/4-inch of space needs to be
maintained between the units to ensure unobstructed door swing.
Units must operate from separate, properly grounded electrical
receptacles placed according to each unit’s Electrical Specifications
Requirements
Power Supply
20 3/4”
The unit requires a grounded and polarized 115 VAC, 60 Hz, 15A
circuit (normal household current). See Electrical Specifications.
Environmental Requirements
The units are designed to operate between 50°F (10°C) and 100°F
(37°C). High ambient temperatures (100°F [37°C] or higher) may
reduce the unit’s ability to reach low temperatures and may also
reduce the ice production rate for those models with icemakers.
20 1/8”
90°
Door Swing
For best performance, keep the unit out of direct sunlight and away
from heat generating equipment.
In climates where high humidity and dew points are present,
condensation may appear on outside surfaces. This is considered
normal. The condensation will evaporate when the humidity drops.
Overlay
2” Min
Wall
20 3/4”
20 1/4”
90°
Door Swing
Stainless
U-Line Door Swing Dimensions
5
4. Gently pull bottom of wrap away from door.
7 3000 Series Doors
Door Alignment and Adjustment
5. The Wrap hinges on top of the door. Carefully pull wrap away
and then up. See Below.
Align and adjust the door if it is not level, or is not sealing properly.
If the door is not sealed the unit may not cool properly, or
excessive frost or condensation may form in the interior.
Step 2
Door Top
IMPORTANT
Properly aligned, the door’s gasket should be firmly in
contact with the cabinet all the way around the door (no
gaps). Carefully examine the door’s gasket to assure that
it is firmly in contact with the cabinet. Also make sure the
door gasket is not pinched on the hinge side of the door.
WARNING
• Do not attempt to use the door to raise or pivot
your unit. This would put excessive stress on the hinge
system.
• Pay special attention to the Cable Arm. Make sure not
to over extend or damage it during door alignment
Step 1
Door Bottom
6. Remove cable from display by
pressing the release pin on the
cable connector.
Stainless Models (Removing Wrap)
1. Open door completely
Press Tab Down
2. Use a short phillips head screw driver to remove stainless steel
wrap screws from bottom of the door.
3. Remove the two wrap screws from the bottom of the stainless
steel door wrap.
Alignment and Adjustment
1. Using a T-25 Torx Bit, loosen each pair of torx head screws on
both the upper and lower hinge plate.
Wrap Screws
2. Square and align door as necessary
3. Tighten Torx head screws on hinge
4. If necessary re-install Stainless steel wrap.
Cable Arm
T-25 Torx Screw
T-25 Torx Screw
U-Line 3000 Series Door Alignment
6
8 3000 Series Overlays
IMPORTANT
If finishing frame overlay, both sides of overlay must be
finished in order to prevent warping.
Overlay / Frame Overlay Panel
3. Optional: Install handles and hardware
Panel Preparation
A Full overlay door panel completely covers the door frame and
provides a built-in appearance.
• The door panel must not weigh more than 20lbs.
•
•
1. Fully open door.
2. Staring at corner pull gasket
away from door.
IMPORTANT
•
Panel Installation
It is important to ensure that all drilled holes are drilled to the
correct depth in order to avoid splits in the wood when
hardware is installed.
Rear view of wood panel for right-hand hinge shown. Use
mirror image for left hand hinges.
Appliance will need up to 34 1/2” to the under side of the
counter to leave room for leveling adjustments
3. Continue to pull gasket free
from gasket channel.
4. Upon removal, lay gasket
down on a flat surface.
1. Cut the panels to the dimensions listed in the diagram below.
2. Optional: Stain or Finish panel to desired stain or color. Be sure
to closely follow the instructions provided by the manufacturer.
Overlay & Frame Overlay Panel Dimensions
BACK SURFACE MUST BE A FLUSH FLAT SURFACE
FOR PANEL DOORS USE A BACKER BOARD
BACK SURFACE MUST BE A FLUSH FLAT SURFACE
FOR PANEL DOORS USE A BACKER BOARD
3/4”
MIN
3/4”
MIN
17.50”
17.50”
2.75” Min
30”
Solid Overlay
30”
Frame Overlay
U-Line Door Panel Installation Guide
7
IMPORTANT
If working with the door that houses the display, make
certain the display cable remains securely seated in the
inner door channel, see below.
10. Be sure the screws force their way past the opening on the
gasket channel and sit flush against the bottom of the gasket
channel.
Inner
Display
Door Channel Cable
Overlay Panel
Overlay Panel
11. Remove bar clamps from door.
12. Starting at the corners, re-install the gasket into the gasket
channel in the frame. Make sure the gasket is fully seated, this
may take some force.
Overlay Grille
5. Carefully center and align the back side of your overlay with the
front of the door.
6. Secure overlay to door using bar clamps.
The 3000 series grille is fully adjustable and can be set to match
your surrounding cabinetry dimensions. In addition to it’s
adjustability, an overlay may also be installed to truly provide a
seamless appearance.
Preparing The Overlay
Bar
Clamp
1. Use the dimensions provided in the diagram on page 9 to cut
and shape your grille overlay. Recommended overlay thickness
is between 1/4” and 3/8”. Dimension A will vary based on your
toe kick height.
2. Finish or stain your grille overlay to match your surrounding
cabinetry. Be certain to carefully follow the finish manufacturer’s
recommendations for application and cure times.
3. Apply double sided tape to the backside of the overlay grill. Use
the diagram below for reference. U-Line recommends 3M™
VHB™ tape, a high strength bonding tape.
Door
Overlay
Panel / Frame
Apply Tape To Shaded Area
Bar
Clamp
4. Remove backing paper from double sided tape.
5. Carefully align grille over overlay and press into position.
7. Using a 7/64” Drill bit, drill 8 pilot holes into the wood panel 3/
8” deep using the holes in the door frame a a guide.
8. Locate the 8 #6x2” screws provided with your unit
9. Using a phillips screwdriver, place one screw into each of the 8
pilot holes and screw down.
U-Line Door Panel Installation Guide
8
1-15/32”
U-Line Door Panel Installation Guide
3036 Models
33-9/32”
35-7/32”
3018 Models
15-19/32”
1”
A
Dimension A may vary from a minimum of 3-1/4” to a maximum 4-1/4” depending on toe kick height.
Measure toe kick height and cut overlay to same dimension.
1-15/32”
17-17/32”
1”
A
Overlay Grille Dimensions
9
9 3000 Series Anti-Tip Bracket
Anti-Tip Brackets Installation.
3036 Side Mount
Side mount configurations work well if you have a granite counter
top or do not wish to mount the brackets to the underside of your
counter top.
1. Align each bracket to the side mounting holes on your model
as shown below.
WARNING
The Anti-tip bracket must be installed to prevent the
unit from tipping when doors are fully opened, or
excess weight is placed on the front of the unit.
Left View Of Cabinet
Right View Of Cabinet
The Anti-tip brackets have multiple mounting options. Mounting
will depend on your particular cabinet configuration. Follow the
instructions below to secure your unit to your cabinet. Locate
your two Anti-tip brackets and 10 #8 x 5/8” screws included with
your unit.
3036 Top Mount
Top mount configurations work well with fully secured wood or
laminate counter tops.
1. Align the brackets on top of your unit as shown below. Both
brackets must be used to ensure a secure mount.
2. Using 4 of the supplied 10 #8 5/8” screws, install 2 screws into
each Anti-tip bracket, mounting the bracket to your unit.
3. Completely slide the unit into it’s position in the opening. Be
certain unit height is properly adjusted. (See Leveling
Information on pg. 12)
4. Open both doors completely to gain access to the Anti-tip
bracket. Make certain doors clear surrounding cabinetry.
2. Using 4 of the supplied 10 #8 5/8” screws, install 2 screws into
each plate using a #2 Phillips head screwdriver.
3. Completely slide the unit into it’s position in the opening. Be
certain unit height is properly adjusted. (See Leveling
Information on pg. 12)
4. Open both doors completely. Make certain doors clear
surrounding cabinetry.
5. Using a 3/32” drill bit, drill 6 pilot holes, 3 for each bracket, 5/8”
deep into bottom of counter top. Use the Anti-tip brackets as a
template.
5. Using a 3/32” drill bit, drill 6 pilot holes, 3 for each bracket, 5/8”
deep into cabinetry frame using the anti-tip bracket as a
template.
The 6 remaining cabinet side mounting screws will be installed
later in this guide.
3018 Top Mount
Top mount configurations work well with fully secured wood or
laminate counter tops.
1. Align the brackets on top of your unit as shown below. Both
brackets must be used to ensure a secure mount.
The 6 remaining cabinet side mounting screws will be installed
later in this guide.
U-Line 3000 Series Anti-tip Bracket Installation
10
2. Using 4 of the supplied 10 #8 5/8” screws, install 2 screws into
each plate using a #2 Phillips head screwdriver.
3. Completely slide the unit into it’s position in the cabinet. Be
certain unit height is properly adjusted. (See Leveling
Information on pg. 12)
4. Open both doors completely. Make certain doors clear
surrounding cabinetry.
5. Using a 3/32” drill bit, drill 6 pilot holes, 3 for each bracket, 5/8”
deep into bottom of counter top. Use the Anti-tip brackets as a
template.
The 6 remaining cabinet side mounting screws will be installed
later in this guide.
3018 Side Mount
Side mount configurations work well if you have a granite counter
top or do not wish to mount the brackets to the underside of your
counter top.
1. Align each bracket to the side mounting holes on your model
as shown below.
Left View Of Cabinet
Right View Of Cabinet
2. Using 4 of the supplied 10 #8 5/8” screws, install 2 screws into
each Anti-tip bracket, mounting the bracket to your unit.
3. Completely slide the unit into it’s position in the opening. Be
certain unit height is properly adjusted. (See Leveling
Information on pg. 12)
4. Open both doors completely to gain access to the Anti-tip
bracket. Make certain doors clear surrounding cabinetry.
5. Using a 3/32” drill bit, drill 6 pilot holes, 3 for each bracket, 5/8”
deep into cabinetry frame using the anti-tip bracket as a
template.
The 6 remaining cabinet side mounting screws will be installed later
in this guide.
U-Line 3000 Series Anti-tip Bracket Installation
11
Installation
10
10 Level & Install
1. Plug in the powercord.
Leveling Information
It is recommended that the unit is level once installed.
1. Use a level to check the levelness of the unit from front to back
and from side to
side. Level should be
placed along top
edge and side edge as
shown
2. Gently push the unit into position. Be careful to not entangle the
electrical cord.
3. Re-check the leveling, from front to back and side to side. Make
any necessary adjustments. The unit’s top surface should be
approximately 1/8" below the countertop.
4. Install the 6 cabinet mounting screws for the Anti-tip bracket.
5. Remove the tape from the glass shelves and wipe out the inside
of the unit with a clean, water-dampened cloth.
Relocating the Shelves
The glass shelves can be moved to accommodate your bottles,
cans and containers.
Glass Shelves
• Open door fully, grasp shelf firmly, lift front edge slightly, and
pull straight out.
• Remove shelf tabs and reposition as necessary
2. If the unit is not level,
remove grille and adjust feet as necessary, Use included tool to
adjust the height of the rear leveler feet.
3. Check the levelness after each adjustment and repeat the
previous steps until the unit is level. Turn screw clockwise to
raise the rear foot, counter-clockwise to lower.
• Reinsert shelf into cabinet and set down onto shelf tabs.
• All four shelf tabs must be set to the same height to properly
support the weight of the shelf.
Installation Troubleshooting
Q:
Problem
The door remains open unless it is pushed closed.
A:
Adjustment Screw
Rear Level Foot
Adjustment Screw
Rear Level Foot
Rotate Forward Feet to Adjust
INSTALLATION TIP
If the room floor is higher than the floor in the cut-out opening,
adjust the rear feet to achieve a total unit rear height of 1/8" less
than the opening’s rear height. Shorten the unit height in the front
by adjusting the front feet. This allows the unit to be gently tipped
into the opening. Readjust the front feet to level the unit after it is
correctly positioned in the opening.
Solution
The hinges should be self-closing when the door is open
approximately 8". If this is not the case, make sure nothing is
caught in the hinge closing mechanism. Also, re-check leveling from
front to back of the unit and readjust if necessary. Make sure that
pivot plate is installed correctly.
Q:
Problem
The custom overlay door was designed to align with the rest of the
cabinet doors, but the unit has crept forward.
A:
Solution
Make sure that the electrical cord is not obstructing the
installation.
Level & Install Unit
12
®
INSTALLATION GUIDE
SERVICE INFORMATION
If you have a problem with this appliance, your use and care guide has troubleshooting information to help you
quickly identify common problems and provide information on possible cause and remedy. Answers to
Customers Frequently Asked Questions are available at www.u-line.com/customer/faq.cfm. You may contact ULine directly:
GENERAL INQUIRIES:
SERVICE ASSISTANCE:
U-Line Corporation
P.O. Box 245040
Milwaukee, Wisconsin 53224-9540 U.S.A.
Phone (414) 354-0300
FAX (414) 354-7905
Email: [email protected]
www.u-line.com
Phone (800) 779-2547
FAX (414) 354-5696
Email: [email protected]
www.u-lineservice.com
PARTS ASSISTANCE:
E-mail: [email protected]
ABOUT U-LINE
Building on 45 years, U-Line has captivated those with an appreciation for the finer things with exceptional
design, inspired innovations and attention to even the smallest details.
U-Line is synonymous with premium built-in undercounter ice making, refrigeration and wine storage appliances, the U-Line Corporation is committed to luxury under the counter. U-Line is known and respected for
unwavering dedication to product innovation, quality and selection. A bold and broad line of models is the product of visionaries in the pursuit of distinctive living environments in the kitchen and spaces beyond.
In 1962, Henry Uihlein founded U-Line Corporation as an outgrowth of Ben-Hur Freezer Company and was
the first to develop and patent an automatic stand-alone undercounter residential ice maker. His foresight and
determination to develop new ideas and to succeed when there were no clear guidelines or solutions are evident today. The Milwaukee, Wisconsin based family operated business provides continuity and vision from
which innovations continue to be born.
Going forward, U-Line will continue offering best-in-class products that build on the company's numerous patents and world firsts to guide the undercounter industry in realizing its unlimited potential.
The Built-In Undercouter Leader Since 1962
U_LINE.COM
©2009 U-Line Corporation
Publication Number 30253 5/2011 Rev B.
®
USE AND CARE GUIDE
MODULAR 3000 SERIES
MODELS:
U-3018RFOL-00
U-3018RFOL-01
U-3018RFS-00
U-3018RFS-01
U-3018RGLOL-00
U-3018RGLOL-01
U-3018RGLS-00
U-3018RGLS-01
U-3018WCOL-00
U-3018WCOL-01
U-3018WCS-00
U-3018WCS-01
U-3036BVWCOL-00
U-3036BVWCS-00
U-3036RRGLOL-00
U-3036RRGLS-00
U-3036RROL-00
U-3036RRS-00
U-3036WCWCOL-00
U-3036WCWCS-00
The Built-In Undercounter Leader Since 1962
U-LINE.COM
Introduction
Please Record Your Model Information
Building on 45 years, U-Line has captivated those with an
appreciation for the finer things with exceptional design, inspired
innovations and attention to even the smallest details.
U-Line is synonymous with premium built-in under counter ice
making, refrigeration and wine storage appliances, the U-Line
Corporation is committed to luxury under the counter. U-Line is
known and respected for unwavering dedication to product
innovation, quality and selection. A bold and broad line of models
is the product of visionaries in the pursuit of distinctive living
environments in the kitchen and spaces beyond.
In 1962, Henry Uihlein founded U-Line Corporation as an
outgrowth of Ben-Hur Freezer Company and was the first to
develop and patent an automatic stand-alone under counter
residential ice maker. His foresight and determination to develop
new ideas and to succeed when there were no clear guidelines or
solutions are evident today. The Milwaukee, Wisconsin based
family operated business provides continuity and vision from which
innovations continue to be born.
Going forward, U-Line will continue offering best-in-class products
that build on the company's numerous patents and world firsts to
guide the under counter industry in realizing its unlimited
potential.
Read and save this Use and Care Guide.
FOR PRODUCT ASSISTANCE, CALL 1-800-779-2547
www.u-line.com
MILWAUKEE, WI U.S.A.
1
HIGH SIDE DESIGN PRESSURE 300 PSI
C
LOW SIDE DESIGN PRESSURE 140 PSI
Model/Modele:
UL
R
US
HOUSEHOLD
REFRIGERATOR AND/
OR FREEZER
LISTED 674R
Serial/Serie:
2
BTL
Congratulations on your purchase of a U-Line refrigeration
product.
You will need your product model and serial number when you
request additional information or services. You can find this
information on the serial plate located on the upper right or back
wall in the interior of your product. This information also appears
on the warranty registration card.
Please record the model number (1), serial number (2), date of
purchase, and dealer contact information for your U-Line product
below:
Model Number:
________________________________________________
Serial Number:
________________________________________________
Purchase Date:
________________________________________________
IMPORTANT
READ all instructions in this guide completely before
using the appliance for the first time.
For future reference, keep this guide in a safe, accessible location. If
you need additional information or assistance, please contact ULine Corporation direct. Contact information appears on the back
cover of this guide.
Before Calling Service. If you think your U-Line product is
malfunctioning, read the OPERATION section of this guide to
understand clearly the function of the control. If the problem
persists, read the TROUBLESHOOTING GUIDE section of this
guide to help you quickly identify common problems, and provide
information on possible causes and remedies.
Dealer Name:
________________________________________________
Dealer Address:
________________________________________________
Dealer Telephone:
________________________________________________
Introduction to U-Line
1 Table of Contents
Introduction
Read and save this Use and Care Guide............................................................................................................ i
Please Record Your Model Information ............................................................................................................ i
Safety Precautions
Safety Alert Definitions.........................................................................................................................................1
General Precautions ..............................................................................................................................................1
3000 Series Product Features
3000 Series Features: ............................................................................................................................................2
Air Flow....................................................................................................................................................................3
Initial Startup ...........................................................................................................................................................3
OLED Electronic Control Display .....................................................................................................................3
Adjusting Temperature Settings .........................................................................................................................3
Product Operation
Interior Lighting ......................................................................................................................................................4
Customer Menu .....................................................................................................................................................4
Electronic Control Quick Guide ........................................................................................................................7
U-Line Wine Guide
Looking Behind the Label.....................................................................................................................................8
Wine Selections Suggestions ...............................................................................................................................8
Ideal Wine Storage Considerations...................................................................................................................9
Wine Stocking Recommendation.....................................................................................................................10
3000 Series Maintenance
Leveling...................................................................................................................................................................11
Adjusting Grille .....................................................................................................................................................11
Refrigerator Bin Installation & Removal. ........................................................................................................13
3000 Series Doors
Door Alignment and Adjustment.....................................................................................................................14
Cleaning
Exterior Cleaning .................................................................................................................................................15
Interior Cleaning ..................................................................................................................................................15
Defrosting ..............................................................................................................................................................15
Condenser Cleaning ............................................................................................................................................16
Product Disposal ..................................................................................................................................................16
Service
Before Calling for Service ..................................................................................................................................17
If Service is Required...........................................................................................................................................17
Replacement Parts ...............................................................................................................................................17
Normal Operating Sounds.................................................................................................................................17
Troubleshooting Guide.......................................................................................................................................17
U-LINE CORPORATION LIMITED WARRANTY FOR MODULAR 3000 SERIES PRODUCTS...20
2 Safety Precautions
General Precautions
IMPORTANT
• PLEASE READ all instructions before installing,
operating, or servicing the appliance.
• Proper installation procedures must be followed when
completing an installation or relocation of a unit.
Consult the installation guide before any installation
begins. U-Line contact information appears on the rear
cover of this guide.
• This unit requires connection to a dedicated 15 Amp
grounded (three-prong), polarized receptacle, installed
by a qualified electrician, compliant with applicable
electrical codes.
Safety Alert Definitions
Throughout this guide are safety items labeled with a Danger,
Warning or Caution based on the risk type:
Use this appliance for its intended purpose only and follow these
general precautions with those listed throughout this guide:
DANGER
RISK OF CHILD ENTRAPMENT. Before you throw away your
old refrigerator or freezer, take off the doors and leave shelves
in place so children may not easily climb inside.
WARNING
SHOCK HAZARD - Electrical Grounding Required.
• Never attempt to repair or perform maintenance on
the unit until the electricity has been disconnected.
• Never remove the round grounding prong from the
plug and never use a two-prong grounding adaptor.
• Altering, cutting of power cord, removal of power
cord, removal of power plug, or direct wiring can
cause serious injury, fire and or loss of property and
or life, and will void the warranty.
• Never use an extension cord to connect power to the
unit.
• Always keep your working area dry.
WARNING
DANGER
Danger means that failure to follow this safety statement will
result in severe personal injury or death.
Install provided Anti-Tip kit on all Wine Captain
Models and Glass Door Refrigerators. Serious personal
injury could occur.
CAUTION
WARNING
• Use care when moving and handling the unit. Use gloves
to prevent personal injury from sharp edges.
• If your model requires defrosting, DO NOT use an ice
pick or other sharp instrument to help speed up
defrosting. These instruments can puncture the inner
lining or damage the cooling unit. DO NOT use any type
of heater to defrost. Using a heater to speed up
defrosting can cause personal injury and damage to the
inner lining.
Warning means that failure to follow this safety
statement could result in serious personal injury,
property or equipment damage.
CAUTION
Caution means that failure to follow this safety statement
may result in minor or moderate personal injury, property
or equipment damage.
IMPORTANT
• Do not lift unit by door handle.
• Never install or operate the unit behind closed doors.
Be sure front grille is free of obstruction. Obstructing
free airflow can cause the unit to malfunction and will
void the warranty.
• Failure to clean the condenser every six months can
cause the unit to malfunction. This could void the
warranty.
• Allow unit temperature to stabilize for 24 hours before
use.
• Do not Block any internal Fans
Use only genuine U-Line replacement parts. Imitation
parts can damage the unit, affect its operation or
performance and may void the warranty.
U-Line Safety Precautions
1
3 3000 Series Product Features
Refrigeration Centers (Glass Door)
Glass Door: Standard with energy efficient, Low-E coated, argon
filled glass doors. Door(s) are available in stainless steel wrap or
overlay.
Adjustable Shelving:
3000 Series Features:
Advanced OLED control system: State of the art OLED
control system display.
3018: 3 removable/adjustable tempered glass shelves, 1 fixed
lower shelf.
3036: 6 removable/adjustable tempered glass shelves, 3 per
zone, and 2 fixed lower shelves, 1 per zone.
Fully Integrated Design: Units are designed to blend seemlessly
with surrounding decor.
Crisper Drawer: Includes “true” crisper drawer, 3036 units
include 1 per zone.
Stainless Steel: Stainless steel models offer a commercial
stainless steel handle and door wrap.
3018 Capacity: 3.8 cubic feet
12 oz Bottle = 64 (with two glass shelves)
12 oz Cans = 128 (with four glass shelves)
Overlay Models: Overlay models accept a custom overlay panel
or frame to achieve perfect symmetry with surrounding cabinetry.
Fully Adjustable Toe-Kick / Grille: Grille is fully adjustable and
can be lined up with surrounding cabinetry toe kick height and
depth for a truly built in look.
3036 Capacity: 3.8 cubic feet per side, 7.6 cubic feet total.
12 oz Bottle = 128 (with two glass shelves)
12 oz Cans = 256 (with four glass shelves)
Refrigeration Centers (Solid Door)
Adjustable Leg Levelers: Heavy Duty leg levelers help dial in
the perfect fit. Rear leg levelers can be adjusted from the front of
the unit for ease of installation.
Solid Door: Available in thermally insulated ultra energy efficient
solid door design. Doors are available in both stainless steel and
overlay.
Advanced diagnostic system: Advanced diagnostic systems
accessible through front grille mounted USB port, an industry first.
Slide out bins: 3 full extension slide-out bins on 3018 models and
6 full extension slide-out bins on 3036 models. Bins are easily
removed for cleaning.
Advanced LED lighting system: Energy efficient and low heat
LED lighting provides an elegant illumination system. Theater style
lights build to fully on and dim to fully off over a 3 second window.
Fully programmable / adjustable.
Convection Cooling: Units are equipped with a convection
cooling system. Convection systems cool items faster and maintain
entire cabinet temperature precisely to user set-point.
3036 Model Features:
Duel Zone: Two independently controlled zones allow precise
storage of a wide range of perishable and temperature sensitive
goods.
Multiple Cabinet Configuration: The 3036 models are
available in a large range of cabinet configurations. From Wine
storage to bin style refrigeration, also in a wide range of
combinations.
3018 Capacity: 3.8 cubic feet
3036 Capacity: 3.8 cubic feet per side, 7.6 cubic feet total.
Wine Captain®
Glass Door: Standard with energy efficient, Low-E coated, argon
filled glass doors.
Full extension wine racks: 6 fully extendable wine racks per
zone safely store your wine at the perfect humidity and
temperature. 2 of the 6 extendable wine racks in each zone have
been designed to carry both standard or large diameter bottles,
including champagne. An additional wine rack per zone on the
bottom carries two additional bottles.
3018 Capacity: 3.8 cubic feet. Wine Bottles: 31
3036 Capacity: 7.6 cubic feet.Wine Bottles: 62
Beverage / Wine Combination Model (3036)
Glass Door: Standard with energy efficient, Low-E coated, argon
filled glass doors.Doors are available in stainless steel wrap or
overlay.
Adjustable Shelving: 3 removable/adjustable tempered glass
shelves, 1 fixed lower shelf.
Full extension wine racks: 6 fully extendable wine racks. 2 of
the 6 extendable wine racks have been designed to carry both
standard or large diameter bottles. An additional wine rack on the
bottom carries two additional bottles.
Capacity: 7.6 cubic feet total. Wine bottles 31. 12 oz cans 128.
2
U-Line 3000 Series Product Features
Zone Control 3036 Models
4 Product Operation
3036 Models have a single control module for both zones. Each side
of the control refers to a specific zone. See Below.
Air Flow
Left Zone
Right Zone
IMPORTANT
The unit requires proper air flow to perform at its highest
efficiency. Do not block the front grille, internal fans or
vents at any time, or the unit will not perform as
expected. Do not install the unit behind a door.
Left Zone
Right Zone
Display Zone Control Configuration
Door Removed For Illustration Purposes
38°
38°
Adjusting Temperature Settings
Up
Zone Toggle
Select
Display
WHITE WINE
O
49 F
WHITE WINE
O
50 F
3036 Model Display Shown
Power
U-Select Lighting
Down
Each Zone has a Series of Zone Settings with a default value for each
setting. Each Zone Setting can be further customized by fine tuning
the temperature set point. See the table below for a description of
each Zone and Zone temperature ranges. Zone selection will vary
by model.
Internal Air Flow And Unit Ventilation Diagram
Zone Setting Chart
Initial Startup
Setting
All U-Line controls are preset at the factory. Initial startup requires
no adjustments.
IMPORTANT
U-Line recommends allowing the unit to run overnight
before loading refrigerator with product.
To turn the unit off, press and hold POWER
for 5 seconds and
release. The display will show a countdown to switching the unit off.
To power your unit on simply press POWER
and the unit will
immediately switch on.
OLED Electronic Control Display
Digital Display.
The 3000 Series units are controlled by a feature rich, advanced
OLED display control unit. The control panel allows adjustment to
temperature set point, access to Energy Saver Mode, internal
temperature readings, and many other features.
Default (°F)
Range (°F)
Red Wine
55°
55° - 65°
White Wine
50°
45° - 55°
Sparkling Wine
45°
38° - 50°
Beverage
38°
34° - 65°
Market
38°
34° - 40°
Root
50°
45° - 55°
Pantry
42°
34° - 70°
Deli
36°
34° - 40°
Many food types have an optimum storage temperature. Storing
your food properly will help maintain it’s freshness and flavor. The
chart on page 4 contains food types and their respective optimum
storage temperatures.
U-Line Product Operation
3
3018 Model
Food Storage Chart
Zone
Food Types
Up
Select
Deli
Meats, Fish, Cheeses, Dairy, Butter, Garlic, Oils,
Nuts, Condiments
Market
Fruits, Vegetables, Berries, Lettuce
Pantry
Dry Goods, Breads, Baking Items, Spices,
Seasonings
Root
Power
U-Select Lighting
Down
Root Vegetables, Potatoes, Onions, Lemon, Lime,
Melon, Peppers, Beans, Cucumber, Cut
Vegetables
1. To begin, press U-Select Lighting
to enter the lighting menu.
2. Use Up
or Down
to cycle through each available
brightness setting; Low, Medium, or High.
The 3036 Models have two independently controlled zones. Each
zone may have its own Zone and set point. The 3018 models have a
single zone. Available Zones Settings will vary with model.
to cycle through each available timer
3. Use U-Select Lighting
setting. Selections include “On With Door”, “On 3 Hours”, “On
6 Hours”, or “On 24 Hours”.
1. In order to adjust temperatures in the 3036 you must first select
a Zone to adjust. To select, press Zone Toggle . The left side
Zone Setting will flash. Pressing Zone Toggle
again will select
the right side and the right side Zone Setting will flash. For 3018
Models simply press Select
to activate Zone Setting mode.
4. To exit, press Select
2. Pressing Select
will cycle through the available zones for your
model. Reference the Zone Settings Chart on pg 3 for each
Setting’s default set point and range.
3. Once your have selected your desired Zone Setting the default
set temperature will display. You may further fine tune the
temperature by pressing Up
or Down .
or simply wait for the menu to time out.
Customer Menu
The 3000 Series of U-Line undercounter refrigeration appliances
contain a feature rich customer menu. The Customer Menu allows
access to a Series of advanced features including Energy Saver Mode,
Sabbath mode, Actual Temp readings as well a method to restore
factory defaults.
3000 Series - Customer Menu
Up
Select
Interior Lighting
WELCOME TO THE
CUSTOMER MENU. USE
UP/DOWN ARROWS TO
SCROLL SETTINGS.
Your U-Line 3000 Series unit uses a state of the art LED lighting
system. The 3036 model dual zone’s lighting can be independently
controlled or set as a group.
3036 Model
Down
Up
Zone Indicator
Zone Indicator
Zone Toggle
Select
2. Use Up
U-SELECT LIGHTING
LIGHTING
LEVEL
HIGH
ON WITH DOOR
3. Use Select
3036 Model Display Shown
Power
U-Select Lighting
Down
1. To begin, press U-Select Lighting
1. To access the Customer Menu hold down both Up
Select
for 5 seconds.
to enter the lighting menu.
3. Use Up
or Down
to cycle through each available
brightness setting; Low, Medium, or High.
to cycle through each available timer
4. Use U-Select Lighting
setting. Selections include “On With Door”, “On 3 Hours”, “On
6 Hours”, or “On 24 Hours”.
4
to scroll through available selections.
to enter selected sub-menu.
4. To exit Customer menu, Use Down
to scroll to the bottom
of the display and use Select
to Select “Exit.”
2. In 3036 Models the unit initially defaults to control the lighting in
both Zones simultaneously. To select a single zone press Zone
Toggle . Notice the arrows on top of the display changing
state. Pressing Zone Toggle
once will select the left side
zone, pressing it again will select the right side zone, pressing it a
third time will select both zones again.
5. To exit, press Select
or Down
and
or simply wait for the menu to time out.
U-Line Product Operation
Actual Temps
Sabbath Mode
Up
Up
Select
Select
RETURN TO MENU
SABBATH MODE
OFF
RETURN TO MENU
ACTUAL TEMPS
LEFT ZONE = 38°F
RIGHT ZONE = 38°F
3036 Model Display Shown
Down
Down
The Actual Temps option displays the actual temperature of each
zone, evaporator, as well as ambient temperature.
1. To view Actual Temps first select Actual Temps from the
customer menu.
2. Use Up
or Down
to scroll through available information.
Return to Menu.
3. To exit, Select
Energy Saver Mode
Up
Energy Saver Mode
Indicator
WHITE WINE
O
49 F
Select
The U-line 3000 Series of models offer a Sabbath mode for users
who celebrate certain Sabbaths. Sabbath mode disables system
responses to user initiated activities and all external functions;
including lighting, display and audible alarms. The unit will still
maintain internal temperatures and set points.
1. To enter Sabbath Mode, select Sabbath Mode from the
Customer Menu.
2. Use Down
to select “Off”.
3. Press Select
, “Off” will begin to flash.
4. Use Up
5. Press Select
WHITE WINE
O
50 F
or Down
to Confirm your selection.
The Display will fade out as the unit enters Sabbath Mode. Sabbath
remains active until the Power Button is pushed.
3036 Model Display Shown
Power
Down
Languages
Up
Energy Saver mode reduces overall energy consumption by altering
user set point, differential, lighting and tone settings. When in
Energy Saver mode a small leaf icon will be displayed on the main
screen.
Select
RETURN TO MENU
LANGUAGES
ENGLISH
1. To enter Energy Saver first select Energy Saver from the
Customer Menu.
2. Use Down
to select “Off” in the menu.
3. Press Select
.
4. Use Up
On.
5. Press Select
or Down
to change “Off” to “On”.
Down
to change the selection from Off to
to confirm your selection.
6. To exit Energy Saver mode simply return to the Customer
Menu, Select Energy Saver mode and change “On” to “Off”.
The U-Line 3000 Series of models supports a number of Display
Languages including English, Spanish, French and German.
1. To Change Display Language select Languages from the
Customer Menu.
2. Use Down
to select “English”.
3. Press Select
, “English” will begin to flash.
4. Use Up
or Down
Languages.
5. Press Select
U-Line Product Operation
to cycle through the available
to confirm you choice.
5
Sound Level
Help
Up
Up
Select
Select
RETURN TO MENU
Help
Model 3018WC
1-800-779-2547
RETURN TO MENU
SOUND LEVEL
HIGH
Down
Down
Audible alarms and alert tones support four different Sound Level
settings, High, Medium, Low, and Off.
To select a new sound level, enter the Sound Level menu from the
Customer Menu.
1. Use Up
2. Press Select
3. Use Up
4. Use Select
or Down
to select the current sound level.
• Model.
• U-Line Contact Phone Number.
• Software version.
, the current setting will begin to flash.
or Down
To access the Help menu select Help from the Customer Menu. Use
the Up
or Down
to scroll through available information. The
Help screen displays the following.
• Serial Number.
to select a different level.
To exit the Help menu use Up
press Select
to confirm.
to confirm your choice.
Fahrenheit / Celsius
Up
Select
RETURN TO MENU
FARENHEIT/CELSIUS
DEGREES = °F
Down
Temperature and Set point information can be displayed in either
Fahrenheit or Celsius.
To change from Fahrenheit to Celsius enter the Fahrenheit / Celsius
menu from within the Customer Menu.
1. Use Down
to select “Degrees”.
2. Press Select
. The selection will begin to flash.
3. Use Up
or Down
°C (Celsius).
4. Press Select
6
to select between °F (Fahrenheit) or
to confirm your choice.
U-Line Product Operation
to select “Return to Menu” and
Electronic Control Quick Guide
Task
Press
Power ON/OFF
Select Zone
(3036 Models
Only)
Select Zone
Type
Fine Tune
Temperature
Set Point
Adjust Cabinet
Lighting
Display
Comment
OFF
Display will begin a 5 second
countdown To Power Off.
RED WINE
55 OF
RED WINE
55 OF
RED WINE
55 OF
SET
U-SELECT LIGHTING
LIGHTING
LEVEL
HIGH
DOOR ONLY
U-Line Product Operation
Display will show The
selected zone.
Zone will flash during
selection. Continue to press
Select button to cycle
through all available zones.
Set will appear while
adjusting set point.
Use Light button to scroll
through light settings. See
Page 4 for more detailed
instructions
.
7
5 U-Line Wine Guide
Matching Food and Wine
Looking Behind the Label
To most, wine is a delicious mystery. We purchase it, uncork it, and
savor its taste and beauty. But there is so much more to true wine
appreciation. Many secrets are simply too good to keep bottled up.
Wine Selections Suggestions
Selecting the right wine for the right occasion can sometimes be a
seemingly awkward or difficult task for the beginning wine
enthusiast. We would therefore like to present you with a few
suggestions which may provide a little more confidence and
enjoyment when choosing and serving your wines.
When selecting wines, keep an open mind and do not be afraid to
be adventurous. Do not view the subject of wine so seriously it
discourages you from learning and discovering for fear of
embarrassment if something is incorrect. Wine is best viewed as a
hobby and enjoyed.
When assembling your collection, try not to become obsessed
with “Vintages.” Although a chart can be a useful tool,
generalizations about a specific year have led more than one
collector to disappointment. Often an “Off Year” will provide a
better value and more drinking enjoyment.
Although there are no hard fast rules for matching wine to food,
observe some guidelines. Delicate dishes should be accompanied
by lighter more delicate wines. Full-flavored foods should be
matched with fuller-bodied wines.
As a general rule, one should aim to ascend in flavor and quality of
wines served.
Serve a:
Before a:
DRY wine
SWEET wine
WHITE wine
RED wine
YOUNG wine
OLD wine
LIGHT-BODIED wine
FULL-BODIED wine
Any step back in quality will be noticed. If a fine wine is tasted prior
to a lesser wine, many of the fine wine’s subtle qualities may be
missed.
Common Food and Wine Matches
Foods
Wines
Fish, Shell Fish, Crab, Oysters
Dry White Wines, Light Sparkling
or Extra Dry Champagne
Beef, Venison
Full-Bodied Red Wines
Pork, Veal, Lamb and Poultry
Light-Bodied Red Wines
Fruit
Sweet White and Sparkling Wines
The primary guideline to the subject of wine is your own palate.
Do not be afraid to make mistakes. Experiment, discover, but most
of all, enjoy yourself and your new U-Line product.
A Toast to Wine Truths
Guide To Common Styles Of Wine
Red Wines
Like the grapes themselves, many wine myths have been cultivated
over the centuries.
California
French
Italian
Zinfandel, Cabernet
Rhone, Chateauneuf-duPape
Barbaresco, Barolo
Medium-Bodied Dry
California
French
Pinot Noir
Bordeaux, Burgundy
Truth: In fact, less than 5% of wines produced today are meant to
be aged. Most wines are crafted to be consumed within the first
one to two years.
Light-Bodied Dry
French
Italian
Beaujolais
Chianti, Bardolino
Myth 2: Wines should be uncorked and decanted allowing them
to "breathe."
Full-Bodied Dry
California
French
Chardonnay
Montrachet, Meursault
Puligny-Montrachet
Medium-Bodied Dry
California
French
Sauvignon-Blanc
Pouilly-Fuisse, Sancerre,
Vouvray, Graves
Light-Bodied Dry
French
Chablis, Muscadet, PouillyFume
Myth 3: When age worthy wines peak, they must be consumed
almost immediately.
Full-Bodied, Very Sweet
Germany
Frency
Hungary
Beerenauslese
Sauternes
Tokay
Truth: Most great wines reach a plateau period rather than a peak.
Great Bordeaux's may have as much as a 10-year plateau before
fading.
Medium-Bodied, SemiSweet
California
Germany
Gewurtztraminer
Liebfraumilch
Myth 4: Wine color does not change with aging.
Light-Bodied Off Dry
Germany
Rhine, Mosel, Riesling
Truth: As red wines age they get lighter in color while whites get
darker.
Full-Bodied Dry
White Wines
8
Myth 1: Most wines taste better when aged.
Truth: To breathe or not breathe? While it is better to allow a
young tannic Red to breathe in a glass or decanter to soften the
tannins, an old Red reaches a stage in its life where it should be
enjoyed soon after opening. Allow an old Red to breathe for a
short time to dissipate any off odors. Most white wines can be
served, ideally, 10-15 minutes after opening.
U-Line Wine Guide
The Cork: A Mystery on Its Own.
Ideal Wine Storage Considerations
Cork Presentation. The ritual of the presentation of the cork
has a rich and fascinating history dating back to the late 1800's. A
phylloxera (root louse) devastation to the vineyards severely
limited the supply of great wines. Restaurateurs would remove
labels on inferior wines and replace them with labels from superior
wines. This made it necessary for patrons to protect themselves by
checking the branding on the cork to ensure that what they
ordered was, in fact, what they were served.
Temperature: The most important element about storage
temperature is stability. If wine is kept in a stable environment
between 40°F and 65°F, it will remain sound. A small 1-2 degree
temperature fluctuation within a stable environment is acceptable.
Larger temperature fluctuations can affect the corks ability to seal,
allowing the wine to "leak" from the bottle.
When presented with a cork today, feel it to check for its integrity,
read and match the branding on the cork to the bottle and set it
aside. There is little to be learned from the cork. The proof is in
the wine.
Corked" wines. If you've ever had a wine that smelled or tasted
of mold, you've experienced a wine that may have been "corked."
Today, between five and eight percent of wines are tainted with
Trichloroanisole (TCA). This substance, found naturally in plants
and trees, is imparted to the wine through the cork. Corked
wines are a major concern for winemakers as it destroys millions
of cases per year and puts reputations at stake. Amazing as it may
seem twist-off caps may offer a better alternative and many great
wineries in California, Australia and New Zealand are pioneering
the trend.
Common Tasting Terms
Terminology
Description
Acidity
A critical element of wine that is responsible for
preserving the wines freshness. Excess acidity
results in an overly tart and sour wine.
Balance
A desired trait where tannin, fruit and acidity are
in total harmony. Wines with good balance tend
to age gracefully.
Body
The weight and presence of wine in the mouth
provided by the alcohol and tannin level. Fullbodied wines tend to have this strong
concentration.
Bouquet
The blending of a wine's aroma within the bottle
over a period of time, caused by volatile acidity.
Complex
A subjective term often used in tasting. A wine is
said to be complex if it offers a variety of flavors
and scents that continue to evolve as it develops.
Flabby
A wine that lacks structure, or is heavy to the
taste, lacks acidity.
Full-Bodied
Wine high in alcohol and extract, generally
speaking, fills the mouth, powerful.
Lean
Generally describes wines that are slim, lacking of
generosity or thin.
Oaky
A desirable flavor imparted to wine if done in
moderation. Most wines are aged in oak barrels
one to three years, thereby receiving this toasty
oak characteristic. However, if a weak wine is left
in contact too long with an oak barrel it will tend
to be overpowered with an oaky taste.
Tannin
Tannins are extracted from the grape skins and
stems and are necessary for a well-balanced red
wine. Tannins are easily identified in wine tasting
as the drying sensation over the gums. Tannins
generally fade as a wine ages.
Humidity: The traditional view on humidity maintains that wines
should be stored on their sides in 50% - 80% relative humidity to
ensure cork moisture and proper fit in the bottle. Contemporary
wisdom suggests that the cork surface is too small to be impacted
by humidity. Further the cork is sealed with a metal or wax capsule
making humidity penetration impossible. The concept of a humid
storage environment was derived from the necessity of wineries to
maintain moisture in their cellars to keep wooden barrel staves
swollen, preventing wine evaporation and product loss. In fact,
vineyards estimate as much as a 10% product loss per year due to
evaporation while wine is aging in the wooden barrels. Humidity,
however, was not intended for the modern home cellar where
wine is stored in glass bottles with sealed corks.
Light: UV rays are not only harmful to people, they are damaging
to wines - especially those in clear bottles. Since oxygen molecules
in wine absorb UV rays, wine should never be stored in direct light
for long periods of time.
Vibration: Provided that sediment is left undistributed and
particles are not suspended, vibration in a storage environment is
not an issue. Wines can become flat or tired when voids and
vacuums are created inside the wine bottle. In order to create
voids and vacuums within a liquid, aggressive motion or shaking of
the wine bottle would have to occur.
The Right Temperature for Wine
Temperature
Wines
Approximately 60°F (15°C)
Red
50°F - 55°F (10°C -12°C)
White
Approximately 45°F (7°C)
Sparkling
Wine Captain® Models - A Touch of Elegance
In 1985 U-Line was the first North American appliance
manufacturer to develop a residential wine storage unit, the Wine
Captain®. Each U-Line Wine Captain® model is designed to
impress and inspire anyone with an interest in wine by providing
cellar conditions in stylish, undercounter units. U-Line Wine
Captain® models offer stable storage temperatures, a 50% internal
relative humidity and protection from UV light rays. U-Line has the
largest product offering available, making storing, presenting, and
sharing your wine effortless and elegant.
U-Line Wine Guide
9
Wine Stocking Recommendation
Specially designed horizontal wine racks properly positioned the
bottles so the wine remains in contact with the cork and assure
the cork does not become dry.
Stock the unit as follows:
1. Stock the wine racks beginning with the lowest rack, at the
back, and working forward. Stagger the bottles as shown.
2. Repeat Step 1 to stock the next higher rack, and continue until
all racks are filled.
3. Larger diameter bottles may be stored on the bottom 2
shelves.
Use These
Shelves For Larger
Diameter Bottles
& Champange
Note: After stocking, allow unit to run 24 hours to stabilize
product temperatures
10
U-Line Wine Guide
Removing and Installing Grille
6 3000 Series Maintenance
WARNING
Leveling
• Disconnect electrical power to the unit before
removing the grille.
• Edges of sheet metal may be sharp
IMPORTANT
Unit must be level for proper door operation
1. Use a level to check the levelness of the unit from front to back
and from side to side. Place the level along top edge and side
edge as shown (1).
2. If the unit is not level, rotate the adjustable leveling legs to raise
or lower each corner of the unit (2) as necessary.
Removing the grille.
1. Disconnect power to unit.
2. Using the included 7/64” Allen wrench, loosen both grille locking
screws. See below
Grille Mounting
Screws
3. Gently pull grille away from unit until it stop.
1
4. Push Grill tabs towards the center of the unit to lift rails off
locking screw.
5. Pull grille free from unit.
Installing the grille.
1. Align slots in grille rail with screw heads in base of unit
2. Push grille tabs towards the center of the unit and set tabs over
screw head.
2
3. To rotate rear leveler legs remove grille (See Removing and
Installing Grille on page 11)
3. Slide grille into position. Using included 7/64 Allen wrench
tighten grille locking screws.
4. Using the provided 1/4” T bar allen wrench rotate the 2
adjustment screws as shown below.
Adjusting Grille
Rotate Clockwise to raise rear leg
Rotate Counter-Clockwise to lower
Rotate Clockwise to raise rear leg
Rotate Counter-Clockwise to lower
The grille has an automatic vertical plane adjustment and can also
be adjusted on its horizontal plane as well. To adjust your grille to
match your surrounding cabinetry follow the instructions below.
5. Check levelness after each adjustment and repeat the previous
steps until the unit is level.
Self Adjusting Grille
Skirt
1. Loosen the locking bolts on the inside of the grille tabs.
Locking bolts are located on the inside of each grille rail.
2. Pull grille out to desired position and secure locking bolts.
3. The grille has a skirt that will self adjust to the height of your
floor.
U-Line 3000 Series Maintenance
11
Adjusting Interior Shelves
Wine Rack Removal and Installation
Models equipped with glass shelves have an adjustable mounting
system. To adjust or simply remove shelves for cleaning, follow the
instructions below.
Wine cabinets are equipped with full extension wine racks. To
remove your wine racks for cleaning follow the instructions below.
Removing / Installing Glass Shelves.
To remove a rack from the cabinet:
1. Remove any bottles stored on the rack.
1. Remove all product from shelf.
2. Grasp the end of the rack, and gently slide it out until it stops.
2. Coming from underneath the shelf, lift both the front and rear of
the glass.
3. Carefully slide shelf out of unit being careful not to scratch the
interior liner.
3. Press the left rack release lever down. At the same time, lift the
matching right rack release lever up. Pull the rack out until it is
free of the tracks and the cabinet.
4. Installation is the reverse of removal.
Adjusting shelf height.
Shelf height may be adjusted to accommodate a broad range of
product. To alter your shelf spacing follow the instructions below.
1. Remove the 4 Shelf retention clips from the shelf slots.
2. Move retention clips as a group to the desired shelf height.
3. Insert shelf clip into the slot of the desired shelf height. Be
certain shelf clip is fully seated into shelf clip slot.
WARNING
Clips MUST be installed with the ribbed side up. Failure
to do so may result in shelf or unit damage.
IMPORTANT
Do not remove the track rails from the cabinet.
Clip Slots
To insert a rack in the cabinet:
1. Align the left and right rack channels with the tracks in the
cabinet. Ensure an even track engagement on both sides by
gently pushing the rack into the cabinet until it stops.
IMPORTANT
All 4 shelf clips for each shelf must be installed at the
same height for shelf stability.
2. Before reloading the rack, ensure proper movement of the
travel stops in the left and right track rails by pulling the rack out
gently until it stops.
4. reinstall shelf.
Cleaning Wine Racks.
Cleaning Shelves
3. Saturate a soft cloth with a soapy, warm water, solution.
Shelves may be cleaned in a soapy warm water solution. A general
household disinfectant may be used if necessary. Be sure to
completely dry your shelf before reinstalling
4. Wring excess water from cloth and wipe racks down.
IMPORTANT
The outside of the wine racks are greased. This white
lithium grease helps provide smooth operation of the slide
mechanism. It is important not to remove grease.
12
U-Line 3000 Series Maintenance
Refrigerator Bin Installation & Removal.
Refrigerator bins are easily removed for cleaning and sanitizing. To
remove your bin follow the instructions below.
1. Fully extend the bin you wish to remove from the cabinet.
2. Lift the front lip of the bin and raise the bin of the racks.
3. Lift the rear of the bin off it’s seat on the rack.
4. Pull the bin up and away from the racks.
To Reinstall
5. Fully extend the empty rack from within the cabinet.
6. Set the rear of the bin over the rear of the slide.
7. Seat the front of the bin down and onto the slide rack.
8. Push the bin back into the cabinet.
Cleaning
Bins may be cleaned in a soapy warm water solution. A general
household disinfectant safe for plastics may be used if necessary. Be
sure to completely dry your bin before reinstalling
IMPORTANT
Bins are NOT dishwasher safe.
U-Line 3000 Series Maintenance
13
4. Gently pull bottom of wrap away from door.
7 3000 Series Doors
Door Alignment and Adjustment
5. The Wrap hinges on top of the door. Carefully pull wrap away
and then up. See Below.
Align and adjust the door if it is not level, or is not sealing properly.
If the door is not sealed the unit may not cool properly, or
excessive frost or condensation may form in the interior.
Step 2
Door Top
IMPORTANT
Properly aligned, the door’s gasket should be firmly in
contact with the cabinet all the way around the door (no
gaps). Carefully examine the door’s gasket to assure that
it is firmly in contact with the cabinet. Also make sure the
door gasket is not pinched on the hinge side of the door.
WARNING
• Do not attempt to use the door to raise or pivot
your unit. This would put excessive stress on the hinge
system.
• Pay special attention to the Cable Arm. Make sure not
to over extend or damage it during door alignment
Step 1
Door Bottom
6. Remove cable from display by
pressing the release pin on the
cable connector.
Stainless Models (Removing Wrap)
1. Open door completely
Press Tab Down
2. Use a short phillips head screw driver to remove stainless steel
wrap screws from bottom of the door.
3. Remove the two wrap screws from the bottom of the stainless
steel door wrap.
Alignment and Adjustment
1. Using a T-25 Torx Bit, loosen each pair of torx head screws on
both the upper and lower hinge plate.
Wrap Screws
2. Square and align door as necessary
3. Tighten Torx head screws on hinge
4. If necessary re-install Stainless steel wrap.
Cable Arm
T-25 Torx Screw
T-25 Torx Screw
U-Line 3000 Series Door Alignment
14
Defrosting
8 Cleaning
Exterior Cleaning
• Stainless door panels, and handles can discolor when exposed
to chlorine gas, pool chemicals, saltwater or cleaners with
bleach.
• Keep your stainless unit looking new by cleaning with a good
quality all-in-one stainless steel cleaner polish monthly. For best
results use Claire® Stainless Steel Polish and Cleaner, which can
be purchased from U-Line Corporation (Part Number 173348).
Comparable products are acceptable. Frequent cleaning will
remove surface contamination that could lead to rust. Some
installations may require cleaning weekly.
• Do not clean with steel wool pads.
• Do not use stainless steel cleaners or polishes on any
glass surfaces.
Minor Frost on the rear wall, or visible through the evaporator
plate vents is normal and will melt during each off cycle. If there is
excessive build-up of 1/4” or more, manually defrost the unit.
• Ensure the door is closing and sealing properly.
• High ambient temperature and excessive humidity can also
produce frost.
CAUTION
DO NOT use an ice pick or other sharp instrument to
help speed up defrosting. These instruments can puncture
the inner lining or damage the cooling unit. DO NOT use
any type of heater to defrost. Using a heater to speed up
defrosting can cause personal injury and damage to the
inner lining.
• Clean any glass surfaces with a non-chlorine glass cleaner.
• Do not use cleaners not specifically intended for
stainless steel on stainless surfaces (this includes glass,
tile and counter cleaners).
• If any surface discoloring or rusting appears, clean it quickly
with Bon-Ami® or Barkeepers Friend Cleanser® and a
nonabrasive cloth. Always clean with the grain. Always finish
with Claire Stainless Steel Polish and Cleaner or comparable
product to prevent further problems.
• Using abrasive pads such as Scotchbrite™ will cause
the graining in the stainless to become blurred.
• Rust not cleaned up promptly can penetrate the
surface of the stainless steel and complete removal of
the rust may not be possible.
IMPORTANT
The drain pan was not designed to capture the water
created when manually defrosting. To prevent water from
overflowing the drain pan and possibly damaging water
sensitive flooring the unit must be removed from
cabinetry.
Defrosting
1. Disconnect power to the unit.
2. Pull the unit free from it’s surrounding cabinetry
3. Turn the unit until you can gain access to the rear panels.
4. Using a 1/4” socket remove all the screws on the lower panel
Interior Cleaning
5. Remove the panel from the unit.
• Disconnect power to the unit.
6. Take note of the white drain line anchored to the evaporation
plate. 3036 Models will have two drain lines and two plates.
• Clean the interior and all removed components using a mild
nonabrasive detergent and warm water solution applied with a
soft sponge or non-abrasive cloth.
• Rinse the interior using a soft sponge and clean water.
• Do not use any solvent-based or abrasive cleaners. These types
of cleaners may transfer taste to the interior products and
damage or discolor the lining.
Drain Line
Evaporator Plate
3018 Model With Lower Panel Removed
7. Carefully pull the drain line(s) from the evaporator plate(s)
anchor and set into (a) larger collection chamber.
8. Allow the frost to melt from the evaporator(s), Be sure to
monitor the collection chambers and empty when necessary.
9. Unit is completely defrosted when water stops entering the
collection chamber(s)
10. After the frost melts completely clean the interior and all
removed components. (See INTERIOR CLEANING)
15
U-Line 3000 Series Cleaning
11. Remove collection chambers and set drain lines back onto their
respective evaporator plates. Be sure to push the drain line into
it’s anchor.
12. Reinstall the lower panel. Do not overtighten panel screws.
13. Move unit back into position and re-connect power. Allow unit
to stabilize for 12 hours before reintroducing product.
Condenser Cleaning
Interval - Every Three Months
To maintain operational efficiency, keep the front grille free of dust
and lint, and clean the condenser every three months. Depending
on environmental conditions, more or less frequent cleaning may
be necessary.
WARNING
Disconnect electric power to the unit before cleaning
the condenser.
IMPORTANT
DO NOT use any type of cleaner on the condenser unit.
14. Remove the grill. (See MAINTENANCE)
15. Clean the condenser coil using a using a soft brush or vacuum
cleaner.
Storage, Vacation and Moving
If not using the unit for an extended period, or otherwise stored,
follow these steps completely:
WARNING
Electrical Shock Hazard. Disconnect power before
servicing. Before operating, replace all panels. Failure
to do so may result in electrical shock or death.
IMPORTANT
If the ambient temperature is expected to drop below
50°F, turn off and unplug unit.
1. Remove all consumable contents from the unit.
2. Disconnect the power cord from its outlet, and leave it
disconnected until the unit is returned to service.
3. Clean and dry the interior of the cabinet.
4. During periods of nonuse, the cabinet must remain open to
prevent formation of mold and mildew. Open door a minimum
of 2 in. (5 cm) to provide the necessary ventilation.
Product Disposal
DANGER
RISK OF CHILD ENTRAPEMENT. Before you throw away
your old refrigerator or freezer, take off the doors and leave
shelves in place so children may not easily climb inside.
Condenser
16. Install the grill. (See MAINTENANCE)
If the unit is being removed from service for disposal, check and
obey all Federal, State and Local regulations regarding the disposal
and recycling of refrigeration appliances, and follow these steps
completely:
1. Remove all consumable contents from the unit.
2. Disconnect power to the unit’s power receptacle. Unplug the
power cord from its outlet.
3. Remove the cabinet door.
U-Line 3000 Series Cleaning
16
Troubleshooting Guide
9 Service
DANGER
Before Calling for Service
ELECTROCUTION HAZARD. Never attempt to repair or
perform maintenance on the unit until disconnecting the
main electrical power.
If you think your U-Line product is malfunctioning, read the
OPERATION section of this guide to understand clearly the
function of the control.
If the problem persists, read the NORMAL OPERATING
SOUNDS and TROUBLESHOOTING GUIDE section of this guide
to help you quickly identify common problems, and possible causes
and remedies. Most often, this will resolve the problem without
the need to call for service.
If Service is Required
If you do not understand a troubleshooting remedy, or your
product needs service, contact U-Line Corporation directly.
Contact information appears on the rear cover of this guide.
When you call, you will need your product Model and Serial
Numbers. This information can be recorded inside the front cover
of this guide. It also appears on the Model and Serial number plate
located on the interior of your product or can be accessed
through “Help” in the Customer Menu.
Troubleshooting - What to check when problems occur:
Problem
Possible Cause and Remedy
Digital Display
and Light Do
Not Work.
Ensure power is connected to the unit.
If the unit is cooling, it may be in Blackout mode. (See
OPERATION)
Interior Light
Does Not
Illuminate.
If the unit is cooling it may be in Blackout mode, or
manually set to off. (See OPERATION)
Light Remains
on When Door
is Closed.
Lighting may be set to On, reset to with door. (See
OPERATION)
Unit Develops
Frost on
Internal
Surfaces.
Frost on the rear wall is normal and will melt during
each off cycle.
If there is excessive build-up of 1/4” or more,
manually defrost the unit.
Ensure the door is closing and sealing properly.
High ambient temperature and excessive humidity
can also produce frost.
Unit Develops
Condensation
on External
surfaces
The unit is exposed to excessive humidity, moisture
will dissipate as humidity levels increase.
Digital Display
Functions, But
Unit Does Not
Cool.
Ensure the unit is not in ‘Showroom Mode’. Press and
hold the Power icon for five seconds to exit
Showroom mode. Press the power button again to
resume normal operation.
Digital Display
Shows an Error.
“Door” indicates the door may be opened too long,
ensure the door is closing properly. For other error
codes contact U-Line Customer Service.
Product is
Freezing.
Product in contact with the rear wall may freeze,
ensure no product is touching the rear wall.
Adjust the temperature to a warmer set-point. (See
OPERATION)
Product is Not
Cold Enough.
Air temperature does not indicate product
temperature.
Adjust the temperate to a cooler set-point. (See
OPERATION)
Ensure unit is not located in excessive ambient
temperatures or in direct sunlight.
Ensure the door is closing and sealing properly.
Ensure nothing is blocking the front grille, found at
the bottom of the unit.
Ensure the condenser coil is clean and free of any dirt
or lint build-up.
Replacement Parts
When you need replacement parts, always request genuine U-Line
replacements. U-Line designs and engineers products using
components that work efficiently, and provide superior service life
and performance. The use of aftermarket parts or components
may affect the safety, operation, performance or durability of your
product, and may also void its warranty.
Normal Operating Sounds
All models incorporate rigid foam insulated cabinets to provide
high thermal efficiency and maximum sound reduction for its
internal working components. Despite this technology, your model
may make sounds that are unfamiliar.
Normal operating sounds may be more noticeable because of the
unit’s environment. Hard surfaces such as cabinets, wood, vinyl or
tiled floors and paneled walls have a tendency to reflect normal
appliance operating noises.
Listed below are common refrigeration components with brief
description of the normal operating sounds they make. NOTE:
Your product may not contain all the components listed.
• Compressor: The compressor makes a hum or pulsing sound
that may be heard when it operates.
• Evaporator: Refrigerant flowing through an evaporator may
sound like boiling liquid.
• Condenser Fan: Air moving through a condenser may be heard.
• Automatic Defrost Drain Pan: Water may be heard dripping or
running into the drain pan when the unit is in the defrost cycle.
• Solenoid Valves: An occasional clicking sound may be heard as
solenoid valves are operated.
17
U-Line Service
This Page Intentionally Left Blank
U-Line Use and Care Guide
18
This Page Intentionally Left Blank
19
U-Line Use and Care Guide
U-LINE CORPORATION LIMITED WARRANTY FOR MODULAR 3000 SERIES PRODUCTS
1.U-Line Corporation ("U-Line") warrants each U-Line Modular 3000 Series product to be free from defects in materials and workmanship
for a period of two years from the date of purchase. U-Line further warrants the sealed system (consisting of the compressor, the
condenser, the evaporator, the hot gas bypass valve, the dryer and the connecting tube) in each U-Line product to be free from defects in
materials and workmanship for a period of five years from the date of purchase.
2.During the initial two year warranty period for all U-Line Modular 3000 Series products U-Line shall: (1) repair any product or replace
any part of a product; and (2) for all Domestic U-Line Modular 3000 Series products sold and serviced in the United States (including
Alaska and Hawaii) and Canada, U-Line shall be responsible for the labor costs performed by a U-Line authorized service company,
incurred in connection with the replacement of any defective part. During years two through five of the warranty period for the sealed
system, U-Line shall: (1) at U-Line's option repair or replace any part of the sealed system; and (2) for all Domestic U-Line Modular 3000
Series products sold and serviced in the United States (including Alaska and Hawaii) and Canada, U-Line shall be responsible for the labor
costs incurred in connection with the replacement of any defective part of the sealed system. All other charges, including transportation
charges for replacements under this warranty and labor costs not specifically covered by this warranty, shall be the responsibility of the
purchaser. This warranty extends only to the original purchaser of the U-Line product. The registration Card included with the product
should be promptly completed by you and mailed back to U-Line or you can register on-line at www.u-lineservice.com.
3.The following conditions are excluded from this limited warranty: damage caused by outdoor use; use of cleaners other than the
recommended stainless steel cleaners and U-Line Clear Ice Maker cleaner; installation charges; damages caused by disasters or acts of God,
such as fire, floods, wind and lightning; damages incurred or resulting from shipping, improper installation, unauthorized modification, or
misuse/abuse of the product; customer education calls; food loss and spoilage; door and water level adjustments (except during the first 30
days from the date of installation); defrosting the product; adjusting the controls; door reversal; and cleaning the condenser.
4.U-Lines' Outdoor Limited Warranty, set forth in this Paragraph 4, shall apply to U-Line models deemed suitable for outdoor use by
Underwriters Laboratory ("UL") as noted in the U-Line Product Catalog, U-Line's website and/or on the serial tag located inside the
product. Exposure to temperatures below freezing may cause damage to the product. Damage resulting to the product (and/or the
surroundings) caused by this exposure is not covered under this warranty. Such models shall continue to be covered by the warranty terms
set forth in Paragraphs 1 and 2 above, to the extent such models:
A.Are subjected to temperatures between 50 and 100 degrees Fahrenheit. Although these products will function in ambient temperatures
below 50 degrees and above 100 degrees Fahrenheit, performance may decline. Performance degradation due to operating above or below
the designated ambient temperature range is not a manufacturing defect and any issues resulting from exposure to higher temperatures,
such as spoiled food or low ice production, are not covered under this warranty policy; and/or
B.Come into contact with rain by virtue of outdoor use. Exposure to other sources of water shall also cause this warranty to be void,
including flooding of the area in proximity of the unit greater than 1/8" deep in water, hurricanes, splashing of pool water, or directing a
spray from a hose or similar device into and around the unit.
5.If a product defect is discovered during the applicable warranty period, you must promptly notify either U-Line at P.O. Box 245040,
Milwaukee, Wisconsin 53224 or at 800-779-2547 or the dealer from whom you purchased the product. In no event shall such notification
be received later than 30 days after the expiration of the applicable warranty period. U-Line may require that defective parts be returned,
at your expense, to U-Line's factory in Milwaukee, Wisconsin, for inspection. Any action by you for breach of warranty must be
commenced within two years after the applicable warranty period.
6.THIS LIMITED WARRANTY IS IN LIEU OF ANY AND ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, ALL OF
WHICH ARE DISCLAIMED. U-Line's sole liability and your exclusive remedy under this warranty is set forth in the paragraphs above. ULine shall have no liability whatsoever for any incidental, consequential or special damages arising from the sale, use or installation of the
product or from any other cause whatsoever, whether based on warranty (express or implied) or otherwise based on contract, tort or any
other theory of liability.
7.Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential
damages, so the above limitations may not apply to you. This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
U-Line Warranty
®
USE AND CARE GUIDE
PRODUCT INFORMATION
Installation Guides with complete installation information, Custom Wood Panel Size Specifications & Installation
Instructions, CAD Drawings, Use and Care Guides, Specifications & Feature Benefits are available for viewing and
download on-line at www.u-line.com/specs/.
SERVICE INFORMATION
If you have a problem with this appliance, your use and care guide has troubleshooting information to help you
quickly identify common problems and provide information on possible cause and remedy. Answers to Customers
Frequently Asked Questions are available at www.u-line.com/customer/faq.cfm. You may contact U-Line directly:
GENERAL INQUIRIES:
SERVICE ASSISTANCE:
U-Line Corporation
P.O. Box 245040
Milwaukee, Wisconsin 53224-9540 U.S.A.
Phone (414) 354-0300
FAX (414) 354-7905
Email: [email protected]
www.u-line.com
Phone (800) 779-2547
FAX (414) 354-5696
Email: [email protected]
www.u-lineservice.com
PARTS ASSISTANCE:
E-mail: [email protected]
BUILDING ON THREE GENERATIONS OF INNOVATION
For nearly five decades and three generations, U-Line continues to be the leader in innovation, quality and value in
the premium built-in undercounter ice making, refrigeration and wine preservation market. U-Line has captivated
those with an appreciation for the finer things with exceptional functionality, style, inspired innovation and attention
to even the smallest details. We are known and respected for our unwavering dedication to product design, quality
and selection.
In 1962, Henry Uihlein founded U-Line Corporation as an outgrowth of Ben-Hur Freezer Company and was the
first to develop and patent an automatic stand-alone undercounter residential ice maker. His foresight and determination to develop new ideas and to succeed when there were no clear guidelines or solutions are evident today.
The newest Uihlein generation continues to build upon the family’s innovative legacy at the Milwaukee, Wisconsin
based business by providing continuity and vision from which new designs and technology continue to be born.
Today the complete U-Line product collection includes Ice Makers, Wine Captain® Models, Combo® Models,
a Refrigerator / Freezer, Refrigerators, Drawers and Beverage Centers. The U-Line brand offers products in the
1000 Series, 2000 Series and the Modular 3000 Series. The 1000 Series offers a more targeted priced product with
appropriate features, while the 2000 Series offers upscale features, advanced technology and specialized product
families. U-Line’s approach to its breadth of products, multiple price points and features allows achoice and product
that will fit any lifestyle.
DESIGNED, ENGINEERED AND ASSEMBLED IN WISCONSIN, USA
The Built-In Undercounter Leader Since 1962
U-LINE.COM
©2009 U-Line Corporation
Publication Number 30255 7/2010 Rev. B
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement