JEM ZR35 - Lightmoves

JEM ZR35
The JEM™ ZR35 is a mid-sized fog machine designed to deliver
superior and uninterrupted performance in demanding professional
applications. Via its powerful 1,500 W heat exchanger, the JEM ZR35
produces a fantastic peak output ideal for mid to large-sized venues
and stages in both install and rental markets.
The rugged yet weight optimized JEM ZR35 also features variable
output control for more subtle effects and is fully up-to-date with
digital remote, DMX and RDM.
The entire JEM ZR range is compatible with a wide range of JEM Pro
fog fluids. As machines designed and built to last, the JEM ZRs will
continue to perform with great output and low consumption.
High endurance mid-sized fog machine
G A L L E R Y
Exceptional performance and output
Various control options via digital remote, DMX and RDM
F E A T U R E S
•
1,500 W heat exchanger
•
50 ml in 30 seconds peak performance
•
800 m³/min fog output
•
Variable output control for subtle effects
•
8-9 minute warm-up time
•
Digital remote, DMX and RDM
•
Compatible with a wide range of JEM Pro fog fluids
•
Floor standing or truss mounting (bracket included)
•
PowerCON TRUE1
•
4-liter bottle (Also compatible with a 5-liter bottle)
T E CHNI CA L
S P E CI F I CA T I O NS
Physical
Length: 590 mm (23.3 in.)
Width: 395 mm (15.6 in.)
Height: 264 mm (10.4 in.)
Height including hanging bracket: 333 mm (13.9 in.)
Weight, dry: 15.1 kg (33.3 lbs.)
Weight, filled: 19.1 kg (42.1 lbs.)
Performance
Coverage volume: 800 m3 (28,252 ft3 ) per minute
Fluid consumption (max.): 140 ml per minute
Continuous effect output
Ready time: 9 minutes
Supplied by:
Control and Programming
Control options: Integrated digital remote control, DMX, master/slave link mode,
optional PLC interface
Control parameters: Continuous or timer-controlled output
Fog: Variable output control, 0-100%
DMX channels: 1
DMX compliance: ANSI E1.11 - USITT DMX512-A
RDM compliance: ANSI/ESTA E1.20 RDM
Construction
Housing: Steel and aluminum
Hanging bracket: Integrated yoke with safety attachment point
Color: Black
©2015 Martin Professional Olof Palmes Allé 18 • 8200 Aarhus N • Denmark • Phone: +45 87 40 00 00 • Fax: +45 87 40 00 10 • www.martin.com
Images contained in this brochure have been converted to CMYK and are not necessarily representative of actual colors. Specifications are subject to change without notice

Heat exchanger: 1500 W, thermally protected
Fluid pump: Oscillating piston, high pressure
Fluid management: Fluid out sensing, sealed for transportation
Fluid reservoir: 4 or 5 l drop-in reservoir with quick-connect fitting
External fluid control: Fluid sensing
Remote control: Integrated Digital Remote with 3 m cable, 3-pin XLR
Installation
Mounting: Standing or hanging
Orientation: Up to +/- 40° from horizontal
Clearance around machine: 100 mm (4 in.)
Connections
AC Power: Neutrik powerCON TRUE1
DMX and link mode in/out: 5-pin locking XLR
Remote control: 3-pin locking XLR
Firmware: AVR socket
Optional PLC interface: 3- and 4-pin locking XLR
Electrical
EU model:
AC power: 220-240 V nominal, 50/60 Hz
Main fuse: 10 AT (slow blow), 250 V
Typical power consumption: 1500 W, 6.8 A*
US model:
AC power: 100-130 V nominal, 50/60 Hz
Main fuse: 15 AT (slow blow), 125 V
Typical power consumption: 1450 W, 12.1 A*
*Measurements made at nominal voltage. Allow for a deviation of +/- 10%.:
Thermal
Maximum ambient temperature (Ta max.): 40° C (104° F)
Exterior surface temperature, steady state: 30° C (86° F)
Max. nozzle temperature: 290° C (554° F)
Minimum ambient temperature (Ta min.): 5° C (41° F)
Approvals
EU model
EU safety: EN 60335-1+A15, EN 62233
EU EMC: EN 61000-6-3
EU immunity: EN 61000-6-1
Australia/NZ (pending): RCM
US model
US safety: UL 998
Included Items
Fluid reservoir, 4 l: P/N 34300523
JEM™ ZR Series Digital Remote Control: P/N 92765048
Power input cable, EU, PowerCON TRUE 1, stripped ends, 3 m (9.8 ft.): P/N 11501043
Power input cable, US, 15A, PowerCON TRUE 1, molded NEMA 5-15P, 3 m (9.8 ft.): P/N
11501045
Accessories
JEM™ ZR35 Ducting System with 5 m (16.4 ft.) 4" flexible ducting: P/N 92625013
JEM™ ZR Series PLC Interface: P/N 92765049
Approved fluids
JEM™ Pro Smoke Studio
JEM™ Pro Smoke Super
JEM™ Pro Smoke High Density
JEM™ I-Fog Fluid
RUSH™ Fog Fluid
JEM™ Pro Clean Supreme
Various sizes available - contact your dealer or see 'Fluids' product pages for details
Installation hardware
G-clamp: P/N 91602003
Half-coupler clamp: P/N 91602005
Quick trigger clamp: P/N 91602007
Safety cable, SWL 60 kg, BGV C1/ DGUV 17, black: P/N 91604006
Service tools
Epsilon 5 AVR Programmer: P/N 50502004
Temperature Calibration Box: P/N 92620005
Ordering Information
JEM™ ZR35, EU: P/N 92215340
JEM™ ZR35, US: P/N 92215350
©2015 Martin Professional Olof Palmes Allé 18 • 8200 Aarhus N • Denmark • Phone: +45 87 40 00 00 • Fax: +45 87 40 00 10 • www.martin.com
Images contained in this brochure have been converted to CMYK and are not necessarily representative of actual colors. Specifications are subject to change without notice

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement