- Industrial & lab equipment
- Electrical equipment & supplies
- Electrical distribution
- Wall transmitters
- User manual
advertisement
RF–433
433 MHz TRANSMITTERS
AND RECEIVERS
RF–433 Series
EASY INSTALLATION AND PROGR AMMING
DESCRIP TION
BEA’s 433 MHz, digital, radio-control transmitters and receivers are universally compatible with any type of automatic door application.
The RF–433 series provides both reliability and efficiency in a wide range of wireless applications.
Digital Radio Transmission
How It Works
10RD433
433 MHz
Receiver
10RD433EH
Extended Hold
Time Receiver
10TD433HH1
One Button
Wireless
10TD433HH2
Two Button
Wireless
10TD433HH3
Three Button
Wireless
10TD433HH4
Four Button
Wireless
10TD433PB3V
One Button,
3-Volt Hard Wired
10TD433PB9V
One Button,
9-Volt Hard Wired
F E A T U R E S
• Uses a rolling code each time a transmitter is activated
• Delay or no delay programming options (i.e. vestibule applications)
• Up to 100 transmitters can be programmed into a single receiver
• Can remove transmitter codes individually or all at once
• Individual transmitters can be programmed to an unlimited number of receivers
• The red LED on the transmitter confirms transmission and battery life
• The red LED on the receiver confirms transmission and provides troubleshooting assistance
WIRELESS ACTIVATION
VESTIBULE
APPLICATIONS
B E N E F I T S
• Ideal for wireless activation and/or sequencing of automatic doors
• A rolling code is transmitted every time the transmitter is activated, providing a secure signal
• Universally compatible with all types of automatic doors
• An extended hold time receiver is available for holding a door open indefinitely as long as a transmitter is pressed
• Toggle or pulse mode selectable by DIP switch
• 0.5 or 10 second relay hold time
• Field replaceable 9 V battery (10TD433PB9V)
R E C E I V E R F E A T U R E S
RF-433
Digital Receiver
ANTENNA WIRE
TERMINAL STRIP
LEARN WITH
DELAY BUTTON
DELAY
POTENTIOMETER
(Time Adjustment)
BLUE LED
(Relay Activation)
RED LED
(Receiver Learn)
DIP SWITCH
LEARN WITHOUT
DELAY BUTTON
NO DEL AY / DEL AY
BEA 433
BEA 433
ONE TR ANSMIT TER
MULTIPLE RECEIVERS
RF– 39 0 SERIES
RF– 30 0 SERIES
WWW.BEASENSORS.COM
79.0025.03 20130201
T E C H N I C A L S P E C I F I C A T I O N S
Frequency
Radio Control Type
Emitted Radio Power
Power Consumption
Input Voltage
433 MHz
Digital
−28.7 dBm (transmitter)
3 mA (transmitter); 30 mA (receiver)
12 to 24 VAC / VDC
Contact Rating
1.0 A @ 30 VDC
0.5 A @ 125 VAC
0.3 A @ 60 VDC
+14ºF to +131ºF Operating Temperature
Max. Transmitters per Receiver 100 transmitters
LED Functionality
Red
Blue
Relay Activity
Receiver/ Transmitter Learn
Dimensions (L×W×H)
Receiver
Transmitter
Certifications
2.75” × 2.125” × 1.0”
2.75” × 1.375” × 0.6”
CE, FCC, IC
Specifications are subject to change without prior notice.
DISCLAIMER This document as well as all other enclosed documents (quotation / specification / other) are provided “as is” without warranties of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability, fitness for a particular purpose, or noninfringement. / Information is supplied upon the condition that the persons receiving it will make their own determination as to its suitability for their purposes prior to use. In no event will BEA be responsible for damages of any nature whatsoever resulting from the use of or reliance upon information from this document or the products to which the information refers. / BEA has the right without liability to change descriptions and specifications at any time. / Prices, shipping and availability are subject to change without prior notice.
RF–433
433 MHz TRANSMITTERS AND RECEIVERS
BEA Inc.
RIDC Park West
100 Enterprise Drive
Pittsburgh, PA 15275-1213
PHONE: 1 800.523.2462
FAX: 1 888.523.2462
Members of:
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project