EnGenius EGS2108P network switch Data Sheet
Add to my manuals2 Pages
EnGenius EGS2108P is a Gigabit PoE Smart Switch designed for small businesses, providing high-speed network access and connectivity to PoE devices. It features 8 Gigabit Ethernet ports, with 4 of them supporting the IEEE 802.3af PoE protocol, delivering up to 15.4 watts per port. The switch offers PoE management, loopback detection, IGMP snooping, bandwidth control, and VLAN capabilities. Ideal for connecting and powering VoIP phones, IP cameras, and wireless access points.
advertisement
EGS2108P
Datasheet
8-port Gigabit PoE Smart Switch
with 4-port AF PoE
Gigabit Speed for Small Businesses
The EGS2108P provides connectivity for devices and applications that require high speed network access and connectivity to PoE devices.
Power Over Ethernet (PoE)
EnGenius Smart PoE (Power-over-Ethernet) Gigabit Switches are specifically designed to meet the needs of start-up and small-to-medium sized businesses. It’s ideal for companies that need a way to connect and power VoIP phone systems,
IP Cameras and Wireless Access Points throughout their facilities. These robust and fully-managed, yet cost-effective switches will help to keep their employees connected, safe and productive. Ports 1-4 of the EGS2108P support the IEEE 802.3af
PoE protocol. Each of these four ports can supply up to 15.4 watts for a total PoE budget of 61.6 watts.
Management
EnGenius switches also include embedded QoS intelligence to prioritize delaysensitive services such as voice and video, simplify unified communications deployments, and help ensure consistent network performance for all services. For example, automated voice VLAN capabilities let you plug any IP phone into your IP telephony network and receive an immediate dial tone.
Key Features
+
8-Gigabit Ethernet ports
+
IEEE802.3af support on ports1-4
+
External Power Adapter with 61.6w PoE
Budget
+
Provides PoE Management on PoE ports
+
Loopback Detection
+
IGMP Snooping
+
Bandwidth Control
+
IEEE802.1Q VLAN
+
IEEE802.1p QoS
www.engeniustech.com
Technical Specifications
Standard
Switching Capacity: 16Gbps
Max. Forwarding Rate (64kBytes): 14.88Mpps
Forwarding Mode: Store and Forward
Packet Buffer memory: 512K Bytes
Flash Memory: 4 MB
Port Functions
8 10/100/1000Mbps Ports in the front panel
PoE Capability
PoE standard: Port 1~4 Support IEEE 802.3af
PoE Capable Ports: Port 1~4 can output up to 15.4W
PoE budget: 61.6 Watts
LED Indicator
Device:
Power LED x1
Fault LED x1
PoE Max LED x1
LAN Mode LED x1
PoE Mode LED x1
Environment & Mechanical
Temperature Range
Operating: 32 to 104°F / 0 to 40°C
Storage: -40 to 158°F / -40 to 70 °C
Humidity (non-condensing)
5% - 95%
L2 Features
Loopback Detection
IGMP Snooping v1/v2
Port Mirroring: one to one and many to one
Static MAC Address
Dynamic MAC List
Bandwidth Control
802.1Q VLAN
Port-based VLAN
Storm Control
PoE Management
- Power on/off per port
- Power Class Configuration
- Power feeding with priority
- User defined power limit
BootP/DHCP Client
Firmware Burn-Proof
Cable Diagnostic
Maximum data rates are based on IEEE 802.11 standards. Actual throughput and range may vary depending on many factors including environmental conditions, distance between devices, radio interference in the operating environment, and mix of devices in the network. Features and specifications subject to change without notice. Trademarks and registered trademarks are the property of their respective owners. For United
States of America: Copyright © 2013 EnGenius Technologies, Inc. All rights reserved.
v1 07192013
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Key Features
- L2
- Basic switching RJ-45 Ethernet ports quantity: 8
- Switching capacity: 16 Gbit/s
- Power over Ethernet (PoE)