Factory Automation Solution Product Selection Guide

Factory Automation Solution Product Selection Guide
Factory Automation Solution Product Selection Guide
Industry 4.0 Innovator
Factory Automation Solution
Product Selection Guide
www.nexcom.com
1
Factory Automation Solution Product Selection Guide
Towards Factory-of-Things Era
Smart Factory
Industry 4.0
Intelligent System
Internet of
Services
IoS
Factory-of-Things
IoT
Industrial
Automation
NISE Automation
Industry 4.0 defines large-scale deployment of
As a long-time provider of industrial automation and computers,
all-IP-based technology in the manufacturing
NEXCOM consolidates industrial automation fieldbus with softPLC
levels to seamlessly integrate material handling
onto its Factory Automation solution to offer highly reliable PC-based
systems, production automation systems
automation control system. NEXCOM's NISE Automation solution
and enterprise IT systems. This smart factory
is not only full IP-based but also compatible with advanced control
concept brings in c yber-physical systems
networks using such as PROFINET, PROFIBUS, Ethernet/IP, DeviceNet
networking to construct a future of smart,
and EtherCAT. The NISE Automation solution can easily work with
green, and urban production. NEXCOM PC-
world-class HMI/SCADA software. In addition, as a technical partner of
based intelligent systems offer cost and
engineering efficiency, helping users easily
upgrade existing legacy automation systems
t o s m a r t- f a c t o r y - r e a d y i n f r a s t r u c t u r e s .
These intelligent systems require IP-based
Industrial
1Revolution
architecture, high computing power, fieldbus
protocol communication capability, and
follows introduction of
water- and
steam-powered
mechanical
manufacturing
facilities
flexible programmable automation software
tools. NEXCOM NISE Automation solution can
Industrial
2Revolution
follows introduction of
electrically-powered
mass production based
on the division of
labou
3
Industrial
Revolution
uses electronics and
IT to achieve further
automation of
manufacturing
Industrial
4Revolution
based on
cyber-physical
systemss
provide an answer which traditional PLCs can
hardly offer or will cause high cost to meet all
demands.
2
Time
End of
18th century
Start of
20th century
Start of
1970s
today
Factory Automation Solution Product Selection Guide
Industrial 4.0
Framework
Germany-based 3S-Smart Software
Solutions, NEXCOM also provides
Internet of
Services
NISE Automation solution with
CODESYS Control RTE, which is the
same control kernel used by major
automation providers, including
Schneider Electric, ABB, Beckhoff,
NISE Automation solution integrates
-, SCM-, CR
PLM ERP M-,
-Ser
nd
vic
S- a
M
e
s
Q
and B&R.
Smart
Material
multiple fieldbus protocols into a
single system and can act as a master
Smart
Product
Smart Factory
or slave automation controller.
The NISE Automation solution
Cloud
APP
Cloud
APP
can seamless integrate world’s
famous branded PLC systems using
Cy
PROFINET, PROFIBUS, Ethernet/IP,
DeviceNet and EtherCAT protocols.
be
APP
r-P
h
To s u p p o r t I P c o n v e r g e n c e o f
y sic
Platfor m
al P ro d u
S
cti o n
yst
em
manufacturing and enterprise
networks, NEXCOM solution helps
users build an IP-based smart factory
Factory of
Things
that aligns with the vision of Industry
4.0 era.
NISE Automation Solution Map
Plant Network / Ethernet
Management
Level
NISE 3600
PBOX 520A
APPC 1930
PBOX 520A
ERP Planning &
Scheduling
PBOX 500+
MES
Citect SCADA
NISE 3600
SCADA Server
CARE
Industrial Ethernet
Operations &
Monitoring
(Control Level)
NIFE
HMI
APPC / IPPC
NISE 3640
Redundancy
Controller
NISE 3640
PC-based
Controller
NISE 4000
Front-Access
Controller
IPPC 2160
Industrial
Workstation
Fieldbus
Gateway
SoftPLC
EXOR HMI
PROFINET
Ethernet/IP
FieldBus
NISE 105
HMI & Remote
I/O Field Level
NIFE 2310
NIFE 100
PC-based Controller
SIEMENS /
AB PLC
Outdoor AP
NISE 4000
Motion
Controller
IWF 3552
Industrial Wi-Fi
PLC
NIFE * HMI
Distributed I/O
IWF
Distributed I/O
PROFIBUS/MODBUS
DeviceNET
Drive Controller
Equipment Controller
Safety Module
Speed Driver
Breaker
3
Factory Automation Solution Product Selection Guide
PC-based Factory Automation Solution Map
1131-3 SoftLo
gic
IEC6
Embedded
Computing
Technology
ic e
IP
Lin u x
t/
D
ev
Fieldbus I/Os
EtherC
AT
Windows
ET
OFIN
PR
NISE Automation
r/Panel PC/
trolle
HM
Con
I
PROFIBUS
Ne
SC A
t
DA / H M
E
r
the
I S oft w a
Ne
re
NEXCOM NIFE (NEXCOM Industrial Fieldbus Embedded)
For SC ADA /HMI applications, NEXCOM's panel PCs
controller features a built-in fieldbus master interface and
offer pre-installed Citech SC ADA software package
CODESYS Control RTE. The fieldbus interface supports
from Schneider Electric. The hardware and software
P R O F I N E T, P R O F I B U S , E t h e r n e t / I P, D e v i c e N e t a n d
compatibility has been tested to help drive down
EtherCAT master and slave devices, making NEXCOM NIFE
development time and cost. To leverage the visualization
controllers compatible with Siemens, Allen-Bradley and
features of Citect SCADA, NEXCOM's panel PCs feature
Beckhoff systems. The built-in CODESYS Control RTE allows
built-in fieldbus interface to enable SCADA/HMI and PLC
users to program PLCs using IEC 61131-3 standard; other
integration.
programming codes such as VC/C++ are also supported.
Furthermore, the NIFE controller can be configured as a slave
NEXCOM's complete solution consists of industrial-grade
station to collect data from legacy PLCs. The NIFE controller
hardware along with flexible configurations of software,
can also act as a fieldbus gateway between PLCs with
controllers and remote I/O modules, covering all aspects
different protocols.
of control, including SCADA solutions for the information
layer. More than just a hardware supplier, NEXCOM is a
For distributed I/O solutions, NEXCOM partners with VIPA,
dedicated automation solution provider with a strong
a German-based provider of remote I/O solutions, to offer
focus on PC-based automation and computer solutions.
®
4
modular PC-based controllers incorporating SLIO modules.
NEXCOM aims to provide PC-based control systems which
These remote I/O modules provide high speed flexible I/O
can highly integrate various branded PLC systems, achieving
options and fieldbus support, while the modular design
IP convergence and helping automation users open the
enables easy maintenance and spare parts replacement.
doorway to smart factory.
Factory Automation Solution Product Selection Guide
SCADA/HMI
WinCC®
Wonderware®
Intellution®
NEXCOM Factory Automation Solution
APPC
IPPC
NIFE
IEC61131-3 SoftPLC
PLC & Remote I/O
SIEMENS
Allen-Bradley
BECKHOFF
ABB
NEXCOM PC-based Factory Automation Building Blocks
NIFE PC-based Controller
Ethernet Network
Pannel PC
NISE 3600
SCADA/HMI
Station
Fieldbus
Concentrator
Fieldbus Remote I/O & Fieldbus Devices
NIFE Series Fieldbus Integrated Solutions
5
Factory Automation Solution Product Selection Guide
PC-based Automation Controller
NIFE 2310
NIFE 4000
NIFE 100
NISE 91
APPC Series
IEC61131-3
SoftLogic
CC by: Larry Ewing
Fieldbus
Remote I/O
PC-based Automation Total Solution Package
NEXCOM's PC-based controller solution, the NIFE (NEXCOM
Industrial Fieldbus Embedded) series, supports fieldbus
technologies such as PROFINET, PROFIBUS, EtherNet/IP,
DeviceNet and EtherCAT. Unlike most slave-only solutions,
NEXCOM's NIFE solution supports both master and slave
interfaces, and is certified by Hilscher, an expert in industrial
PLC
communication, to deliver reliability-proven solutions.
NEXCOM is a well-known supplier of fanless computers, which
are used in various control platforms by many automation system
vendors. Available in both standard and OEM/ODM models,
NEXCOM's NIFE product line comes in a range of form factors and
processor configurations including ARM, Intel® Atom™ and Intel®
Core™ processors to suit different application requirements.
NEXCOM’s solution has also been implemented successfully in
critical applications, with quality and reliable results.
NEXCOM's NIFE series combines PC technology, fieldbus
interface and fanless design into a single platform. In addition
to robust hardware, the NIFE series also comes with a fieldbus
6
Fieldbus Concentrator &
Data Server
NIFE 2310
Fieldbus Slave for
Main PLC Systems
Integration
NISE 300
Factory Automation Solution Product Selection Guide
SCADA Package
NISE Automation
Hilscher Fieldbus Network
CODESYS SoftPLC
configuration tool similar to common PLC programming
software. With an easy-to-use interface, engineers can use the
tool to configure all the supported fieldbus protocols without
any additional training.
For the control kernel, the NIFE series implements CODESYS
Fieldbus Master for
PC-based Controller
Control RTE, which supports real-time control under
Windows XP, Windows 7 and Linux operating systems.
Designed by 3S-Smart Software Solutions, CODESYS is one
NIFE 4000
NISE 300
PC-based Controller
NIFE+IEC61131-3 SoftPLC
of the most popular SoftLogic software in the industry and
is used by major automation providers such as Schneider
Electric, ABB, Beckhoff and B&R. Using CODESYS, control
engineers can flexibly create custom control algorithms for
different fieldbuses through a ladder logic approach that
control engineers have become used to with traditional PLCs.
Fieldbus
Remote I/O
Utilizing Hilscher's Leading-edge
Fieldbus Technology,
NEXCOM Offers Fieldbus Total Solution
to Cover 70% Market Coverage
7
Factory Automation Solution Product Selection Guide
Fieldbus Concentrator Solution
SCADA/HMI Station
costly and time consuming, especially for existing
Wi-Fi/
3G Modules
systems that were built with different brands.
Only a few numbers of suppliers have offered
solutions with such a high level of integration.
To provide cost-effective solution for fieldbus
integration, NEXCOM's fieldbus concentrator
solution features multiple fieldbus expansion
Fieldbus is the key to factory automation systems because it defines a
support to provide high flexibility and reliability.
network standard for PLC controllers to communicate with each other and
NEXCOM’s NISE 300 fieldbus concentrator can
guarantees reliable data transfers. As a result, most control system vendors
support up to 5 protocols including PROFINET,
have developed their own fieldbus protocols to stay competitive and secure
PROFIBUS, EtherNet/IP, DeviceNet and EtherCAT,
businesses. These include PROFINET and PROFIBUS from Siemens, EtherNet/IP
with the flexibility to configure each interface as
and DeviceNet from Allen-Bradley and EtherCAT from Beckhoff, which is
master or slave depending on users' requirements.
popular in machine automation and semiconductor applications.
With support for various protocols on a single
device, NEXCOM's concentrator solution allows
8
Because different vendors each have their own specific applications and
users to deploy fewer hardware devices and
proprietary protocols, combining different systems within a factory have become
offers significant cost savings.
Factory Automation Solution Product Selection Guide
Fieldbus Concentrator
NISE 300
NISE 301
Multi-fieldbus Concentrator
Fieldbus Concentrator Advocates M2M
Factory with 6 Mini-PCIe Expansion
Capabilities
condition. With all I/O aligned on the front side and its
compact size, usability is significantly improved for better
user experience. Two unit of NISE 300 can fit in a 2U 19"
rackmount chassis.
The fieldbus concentrator NISE 300 is based on the 4th
generation Intel ® Core™ processor family paired with
NISE 300 provides rich and swappable I/O interfaces. NISE 300
Intel ® 8 Series Chipset. With CPU performance up by
supports Fieldbus protocols (PROFIBUS , DeviceNet,
13% and graphical performance by 32%, the fanless box
EtherC AT, PROFINET, C ANOpen, MODBUS), network
has outstanding system performance for intelligent and
connectivity (GbE LAN, Wi-Fi, GSM), storage (mSATA) and
industrial computing solutions.
other I/O interfaces (GPIO, RS232/422/485). Along with
flexible multiple modular expansions, the versatile NISE 300
NISE 300 features 8GB DDR3/DDR3L memory, CFast, SATA
can be used for M2M intelligence and factory automation
3.0, USB 3.0 interfaces. It supports wide range power input
platforms. Another variant, NISE 301, supporting two mini-
9~30VDC and can operate from -5°C to 55°C under fanless
PCIe expansion is also available with a much compact size.
SCADA/HMI Station
NIFE 2310 w/ Fieldbus
Interface
9
Factory Automation Solution Product Selection Guide
NEXCOM SCADA/HMI Solution
A SCADA station provides centralized monitoring and
protocols and powerful data processing capabilities to run
management of factory operations, interfacing with different
robust SCADA software. To offer a complete hardware and
fieldbus PLCs and other industrial process components. As
software solution, NEXCOM has combined its industrial-grade
such, SCADA stations require support for various fieldbus
fanless Control PCs with Vijeo Citect, a worldwide recognized
APPC/IPPC + CITECT
(Built-in Fieldbus Drivers)
NEXCOM PC-based
Controller
Fieldbus
Remote I/O
NIFE+CODESYS SoftLogic
SCADA/HMI Station
10
Factory Automation Solution Product Selection Guide
SCADA software from Schneider Electric. Users can have
reliable hardware and trusted software from NEXCOM
one-stop shop service.
Vijeo Citect supports numerous fieldbus protocol drivers
and offers a flexible configuration environment to develop
sophisticated graphical user interfaces. With the ability to
reproduce an intuitive visualization of plant operations,
operators can more effectively monitor, manage and
optimize industrial processes of factories of any size,
making it ideal for numerous applications including the
following:
Oil & Gas
Mining, Minerals, Metals
Water & Wastewater
Power
Food and Beverage
Vijeo Citec's flexibility also makes NEXCOM SCADA/HMI
solution suitable for other industries, including steel,
petrochemical, and pharmaceutical, oil refinery, and more.
Furthermore, the Vijeo Citect features redundancy
mechanisms to ensure mission-critical applications can
maintain functionality and performance in the event of
hardware failure.
11
Factory Automation Solution Product Selection Guide
Fieldbus I/O Solution
NEXCOM's I/O solution integrates SLIO® modules from VIPA,
Equipped with reliable remote I/O technology, the SLIO®
a provider of remote I/O modules with vast experience in PLC
modules feature compact size to simplify installation in
technology. VIPA SLIO® modules come in micro form factors with high
tight spaces and a modular design to ease maintenance;
bus speed and wide fieldbus support. It can be fitted with different
modules can be replaced easily without any rewiring.
couplers for different fieldbus networks. By using NEXCOM's
In addition, with many different I/O module offerings
®
NIFE PC-based controller in collaboration with SLIO modules,
available, the SLIO® solution can satisfy requirements for
users can easily establish a complete PC-based control station.
any automation applications.
Interface Module Power Module
Signal Module
Function Module
Potential
Distributor Module
190 mm
12
Factory Automation Solution Product Selection Guide
Features
Installation and Maintainability
Compact and Space-Saving Design
ƒƒ Conceptual separation of electronic and installation layer
ƒƒ Space-saving, thin design
ƒƒ Innovative staircase-shaped wiring layer
ƒƒ Simple "two components set-up"
ƒƒ "Permanent wiring" enables the exchanging without the
disconnection of the wiring
ƒƒ Intelligent slide and plug mechanism for a simple handling
ƒƒ Electronic is protected against reverse polarity
ƒƒ Encoding of the electronic modules prevents from
incorrect plugging
Clever Labeling and Diagnostic Concept
ƒƒ Clear allocation and readability of channel states
ƒƒ Simple, time-saving installation and maintenance by means
of the connector pin assignment provided on the module
ƒƒ Clear, definite labeling of channels
High performance
ƒƒ Quick backplane bus concept of 48MBit/s
ƒƒ With ETS modules it is possible to switch exactly up to +-1us
independent of fieldbus.
ƒƒ Reference designator label remains on the exchange of a module
Diagnoses and channel conditions can be easily seen on the
module – due to the universally understandable LED-displays.
Already when you set up you can clearly indicate which
module does what by means of the practical labeling strips.
The clamp terminal assignment is printed under the labeling strips.
All modules have a simple,
space-saving, staircase-shaped wiring level.
Electronic Module
Locking Hook
General isolation from electronic and installation level.
Bus Terminal
Optimal placement of the interfaces for space saving connections.
ƒƒ Galvanic isolation between fieldbus and backplane bus.
ƒƒ DIP-switches for address configuration with transparent cover.
ƒƒ Electrical isolation between fieldbus and input/output level.
13
Factory Automation Solution Product Selection Guide
Control Kernel – SoftLogic
the busline will be green
IEC 61131-3 is the most popular control programming language
In addition to NEXCOM, major automation suppliers such as
standard for automation applications. It provides automation
Schneider Electric, ABB, Beckhoff, B&R and many more have
users with an easy-to-use and easy-to-maintain programming
also used CODESYS and Hilscher interface modules in a few
framework. As such, NEXCOM's NIFE PC-based controllers
of their products. Sharing the same level of quality as these
have been implemented with CODESYS SoftLogic as the
trusted brand names, NEXCOM's NIFE PC-based controllers
underlying control kernel. Developed by 3S-Smart Software
deliver high reliability at a reasonable cost compared to
Solutions GmbH, CODESYS has been well known for its high
other highly-priced solutions.
reliability, multi-fieldbus integration and user-friendly interface.
The version of CODESYS that NEXCOM has implemented
14
Furthermore, as a partner of Hilscher, CODESYS has
is CODESYS RTE runtime, which has a real-time engine
integrated Hilscher interface module and various device
embedded within the runtime kernel to guarantee
drivers to drive different fieldbus and remote I/O systems.
deterministic control performance. It supports numerous
Using the Hilscher Configurator tool along with SoftLogic
operating systems to suit different user requirements,
programming, control engineers can configure fieldbus
including Windows XP, Windows 7, Windows Embedded and
devices and program control algorithms in an identical
Linux, as well as optional software bundles for TagetVisu,
method to a traditional PLC software tool.
SoftLogic and HMI.
Factory Automation Solution Product Selection Guide
Panel PC & HMI Solution
Cloud Server
NEXCOM Xcare™ Utility
Remote Management
Embedded
API
Hardware
Status
Remote
KVM
System
Restore
Remote
Configuration
3rd Party
Applications
NEXCOM Platform with Intel® Architecture Processor
Xcare™ 3.0
CC by: Larry Ewing
Diagnostic and remote management
PLC programming & soft motion CNC control
Windows Embedded customized image
BSP & Linux customized service
Real-time HMI & SCADA
eTOP 507
Sereis
HMI
SCADA Citect
APPC Series
NEXCOM's panel PC solution is not only designed for SCADA
monitoring and management, but also complements
solutions from EXOR, a major provider of HMI systems, for
monitoring field operations. Based on ARM architecture
processors, EXOR's HMI panel PCs come in panel sizes
ranging from 4" to 15", and meet Class I, Division II
requirements for harsh factory environments. For factory
communication, the panel PCs include options for PROFIBUSDP, CAN and MPI interfaces, and feature built-in HMI
software, JMobile, to monitor and control remote systems.
In addition, the HMI software supports remote web access to
enable field site operators to administrate the system using
workstations or mobile devices from anywhere at any time.
eTop 507
For larger display requirements, NEXCOM's x86-based
control panel PCs offer sizes of 15", 17" and 19". These
panel PCs support Intel® Atom™ and Intel® Core™ processors
and EtherCAT master and slave devices can be fitted for
to accommodate different performance levels along with
different PLCs. Furthermore, optional PC version of JMobile
fanless designs for reliable operation. Optional fieldbus
software can be installed to provide functions similar to EXOR's
interfaces for PROFINET, PROFIBUS, EtherNet/IP, DeviceNet
HMI panel PCs.
15
Factory Automation Solution Product Selection Guide
Solution Package
NEXCOM offers a complete solution package for IP-based
NEXCOM's PC-based controller solution consists of NEXCOM
factory automation systems including fieldbus-enabled PC-
Industrial Fieldbus Embedded (NIFE) series, which are a range
based controllers, SCADA/HMI systems, remote I/O, fieldbus
of industrial fanless computers with built-in fieldbus interface
concentrators/gateways. Both hardware and software solutions
for control and monitoring. With two options available, the
are available to offer customers a one-stop shopping solution.
NIFE series can be configured as an IEC 61131-3-compliant
Water Treatment
Fieldbus Concentrator Solution
HMI Solution
Steel Process & AOI Solution
PC-based Control System
SCADA
Machinery HMI
APPD
NISE
Panel PC
16
PC-based Control System
WINCC & CIMATIC Integration
Factory Automation Solution Product Selection Guide
SoftPLC, or configured with customized fieldbus interface
modules from different vendors.
drivers that support customer-specific control programs.
For SCADA/HMI applications, NEXCOM’s solution consists of
In addition, the built-in fieldbus interface can be equipped
control panel PCs with pre-installed CitectSCADA software
with remote I/O modules, enabling the NIFE series to
package and HMI panels from EXOR. Designed for system
function as a control station. Various VIPA SLIO fieldbus
monitoring and management of control devices, NEXCOM's
coupler modules are also available to satisfy numerous
SCADA/HMI solution comes with fieldbus communication
fieldbus I/O requirements, including support for remote I/O
capability.
PC-based Controller
Automation PC Platfrom
Central Control
SCADA Station
NIFE
NISE 4000
NIFE
High
Performance
SCADA Station
CC by: Larry Ewing
NISE 3660
NISE 300
NISE 3000 Series
CC by: Larry Ewing
QNX
RTX
VxWorks
Driver for
Middle Level
SCADA/HMI/
Control Station
NISE 2000 Series
Field
Controller &
Data Server
NISE 60 NISE 90/91
Control Program
IEC61131-3 SoftLogic
NISE 100 Series
M2M and
Communication
Gateway
NISE 60 NISE 90/91 NISE 100
Fieldbus Remote I/O
Fieldbus Remote I/O
NISE 300
PC-based
Fieldbus
Platform
NIFE 2310
Fieldbus Panel PC Series
17
New Product Highlights
2014 New Products
NISE 105
Intel® Atom™ Processor E3826 Dual Core Fanless System
■■
■■
■■
■■
■■
■■
Onboard Intel® Atom™ processor E3826 Dual Core, 1.46GHz
Dual independent display from DVI-I and HDMI
2 x Intel® I210IT GbE LAN ports support WoL, Teaming and PXE
2 x USB2.0 & 1 x USB3.0, 2 x RS232/422/485
Support optional Wi-Fi/3.5G/4G/Fieldbus Modules
Support -20°C ~ 70°C extended operating temperature
NISE 105A
Intel® Atom™ Processor E3826 Dual Core Fanless System
NISE 301
Front Access Intel® Atom™ Fanless Automation System
18
■■
Onboard Intel® Atom™ processor E3845 Quad core, 1.91GHz
■■
Dual independent display from DVI-D and VGA
■■
2 x Intel® I210IT GbE LAN ports support WoL, Teaming and PXE
■■
3 x USB2.0, 2 x RS232/422/485
■■
Support optional Wi-Fi/3.5G/4G/Fieldbus Mini-PCIe Modules
■■
Typical 24V DC input with +/-20% range
■■
Onboard Intel® Atom™ processor E3826 Dual Core, 1.46GHz
■■
Dual independent display from DVI-I and HDMI
■■
2 x Intel® I210IT GbE LAN ports support WoL, Teaming and PXE
■■
2 x USB2.0 & 1 x USB3.0, 2 x RS232/422/485
■■
Support optional Wi-Fi/3.5G/4G/Fieldbus Modules
■■
Support NVRAM 1Mb
■■
Support -20°C ~ 70°C extended operating temperature
New Product Highlights
NISE 2400
Intel® Atom™ Processor E3827 Dual Core Fanless System
■■
Onboard Intel® Atom™ processor E3827 Dual Core, 1.75GHz
■■
Dual independent display from DVI-I and HDMI
■■
2 x Intel® I210IT GbE LAN ports support WoL, Teaming and PXE
■■
2 x RS232/422/485, 4 x USB2.0, 1 x USB3.0
■■
2 x Mini-PCIe socket for optional mSATA/Wi-Fi/3.5G/4G/
Fieldbus modules
■■
Support -20°C ~ 70°C operating temperature; support 9-30V
DC input
NIFE 100
Intel® Atom™ E3826 Factory Automation Fanless System
■■
■■
■■
■■
■■
■■
■■
Onboard Intel® Atom™ processor E3826 Dual Core, 1.46GHz
2 x RS232/422/485 with 2.5KV isolation protection
2 x Intel® I210IT GbE LAN ports support WoL, Teaming and PXE
1 x Mini-PCIe socket for optional mSATA/Wi-Fi/3.5G/4G/
Fieldbus modules
Support NVRAM 1Mb
Support -20°C ~ 70°C operating temperature
Typical 24V DC input with +/-20% range
PLC & Remote I/O module as the option
NIFE 101
Intel® Atom™ E3826 Factory Automation Fanless System
■■
Onboard Intel® Atom™ processor E3826 Dual Core, 1.46GHz
■■
2 x RS232/422/485 with 2.5KV isolation protection
■■
2 x Intel® I210IT GbE LAN ports support WoL, Teaming and
PXE
■■
1x Mini-PCIe socket for optional Wi-Fi/3.5G/4G modules
■■
Support NVRAM 1Mb
■■
Support -20°C ~ 70°C operating temperature
■■
Typical 24V DC input with +/-20% range
19
NIFE 100
Intel® Atom™ E3826 Dual Core Factory Automation Fanless System
with Fieldbus Expansion Ability
PLC & Remote I/O module as the option
Main Features
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Onboard Intel® Atom™ processor E3826 Dual Core 1.46 GHz
1 x DVI display output or 1x VGA converted from DVI-I
2 x Intel® I210IT GbE LAN ports support WoL, Teaming and PXE
1 x USB2.0 & 1 x USB3.0
2x RS232/422/485 with 2.5KV isolation protection
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
1 x Mini-PCIe socket for optional Wi-Fi/3.5G/4G/Fieldbus modules
Front access CFast socket and RTC battery
Support NVRAM 1Mb
Support -20 ~ 70 °C extended operating temperature
Typical 24V DC input with +/-20% range
Product Overview
Powered by the latest generation of Intel® Atom™ processor E3826 (formerly codenamed “Bay Trail-I”), it presents a brand new opportunity for both
intelligent and industrial computing solutions. NIFE100 supports up to 4G DDR3L memory and have several options on storage devices like CFast and
SSD. The NIFE 100 support extended operating temperature from -20 upto 70 degree C with typical DC input 24V +/-20% range. The NIFE 100 has high
integration ability with optional Mini-PCIe module and 2 x COM ports with Isolation protect, which makes it a real intelligent system for various applications
such as factory automation applications (with optional PROFIBUS, ProfiNET, DeviceNET, EtherCAT, EtherNet/IP master module), network applications (with
optional GbE LAN, Wi-Fi, 3.5G/4G LTE module) and communication applications (with optional GPIO, RS232/422/485). NIFE100 is definitely the top choice
for M2M intelligent system and factory automation platforms.
Specifications
CPU Support
ŒŒ Onboard Intel® Atom™ processor E3826 Dual Core 1.46GHz
ŒŒ Support Intel® Atom™ E3800 processor family from single core E3815,
Dual Core E3825/E3826/E3827 and Quad Core E3845 with difference
SKUs
Main Memory
ŒŒ 1 x DDR3L SO-DIMM socket, support DDR3L 1066/1333 4GB RAM
max., un-buffered and non-ECC
I/O Interface - Internal
ŒŒ 4 x GPI and 4 GPO (5V, TTL Type)
ŒŒ Storage Device
Display Option
ŒŒ 1 x CFast (SATA 2.0)
ŒŒ 1 x 2.5" SSD (SATA 2.0)
ŒŒ 1 x DVI display output
ŒŒ 1 x VGA display output (converted from DVI-I to VGA adapter)
Expansion Slot
I/O Interface-Front
ŒŒ ATX power on/off switch
ŒŒ LEDs for power status, HDD access, battery Low, 2 x programing
LEDs, 4x Tx/Rx LEDs
ŒŒ 1 x External CFast socket
ŒŒ 1 x SIM card holder
ŒŒ 2 x Intel® I210IT GbE LAN ports, support WoL, Teaming and PXE
ŒŒ 1 x DVI-I display output
ŒŒ 1 x USB 3.0 (900mA per each)
ŒŒ 1 x USB 2.0 (500mA per each)
ŒŒ 2 x RS232/422/485 with 2.5KV isolation protection, support auto flow
control
20
-- Jumper-free setting on RS232/422/485
-- Support RI function on COM2
ŒŒ 1 x 2-pin remote power On/Off switch
ŒŒ 1 x 3-pic DC input, Typical 24V DC input with +/-20% range
Factory Automation Solution Product Selection Guide
ŒŒ 1 x Mini-PCIe socket for optional Wi-Fi/3.5G/4G/Fieldbus modules
Power Requirement
ŒŒ Typical 24V DC input with +/-20% range
ŒŒ 1 x optional 24V, 60W power adapter
Support OS
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Windows 8
Windows Embedded Standard 8
Windows 7
Windows Embedded Standard 7
Windows Embedded Compact 7
Linux Kernel version 3.8.0
Dimension Drawing
88.40
60
41
141.50
4.30
135.50
73.80
64.50
3.70
4.30
192.50
223.50
73.80
9.30
33.60
Dimensions
ŒŒ 192.5mm (H) x 135.5mm (D) x 88.4mm (W)
Construction
ŒŒ Aluminum and metal chassis with fanless design
Environment
ŒŒ Operating temperature:
Ambient with air flow: -20°C to 70°C with industrial grade device
(according to IEC60068-2-1, IEC60068-2-2, IEC60068-2-14)
ŒŒ Storage temperature: -30°C to 85°C
ŒŒ Relative humidity: 10% to 95% (non-condensing)
ŒŒ Shock protection:
-- HDD: 20G, half sine, 11ms, IEC60068-27
-- CFast: 50G, half sine, 11ms, IEC60068-27
ŒŒ Vibration protection w/ HDD condition:
-- Random: 0.5Grms @ 5~500 Hz, IEC60068-2-64
-- Sinusoidal: 0.5Grms @ 5~500 Hz, IEC60068-2-6
ŒŒ Vibration protection w/ CFast & SSD condition:
-- Random: 2Grms @ 5~500 Hz, IEC60068-2-64
-- Sinusoidal: 2Grms @ 5~500 Hz, IEC60068-2-6
15
38.60
Ordering Information
ŒŒ NIFE 100 (P/N: 10J70010000X0)
Intel® Atom™ processor E3826 Dual Core fanless system
ŒŒ 24V, 60W AC/DC power adapter w/ o power cord
(P/N: TBC)
Optional Fieldbus kit
88J50090E00X0
88J50090E01X0
88J50090E02X0
88J50090E03X0
88J50090E04X0
FBI 90E-PNM KIT
FBI 90E-EP KIT
FBI 90E-ECM KIT
FBI 90E-PBM KIT
FBI 90E-DNM KIT
ProfINET Master Module Kit
Ethernet IP Master Module Kit
EtherCAT Master Module Kit
Profibus Master Module Kit
DeviceNet Master Module Kit
Certifications
ŒŒ CE
ŒŒ FCC Class A
Factory Automation Solution Product Selection Guide
21
NIFE 2310
Intel® Atom™ D2550 Factory Automation Fanless System
with Fieldbus Expansion Ability
Main Features
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
OnBoard Intel® Atom™ Dual Core D2550 processor 1.86 GHz
Intel® 82801JIR ICH10 RAID
1 x DVI-I & 1 x DVI-D display output
4 x Intel® 82574IT GbE LAN ports; Support WoL, teaming and PXE
4 x RS232/422/485
4 x GPI & 4 x GPO
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
6 x USB2.0; 1 x external CFast socket; 1 x SIM card socket
1 x internal Mini-PCIe socket
Support +9V to 36VDC input; Support ATX power mode
1 x PCI expansion
Support optional Fieldbus module kit (PROFIBUS, ProfiNET,
DeviceNET, EtherCAT, Ethernet IP master module)
Product Overview
Powered by Intel® Atom™ Dual Core D2550 Processor, NIFE 2310 is designed for industrial fieldbus enable system which can be utilized in most factory
automation applications. The fanless NIFE 2310 is also designed to be operated in harsh environment with extended operating temperature feature.
Targeting as gateway and SCADA control system, NIFE 2310 is designed with 4 x LAN ports, support WoL, LAN teaming and PXE functions. In addition,
NIFE 2310 also provides 4 x COM, 6 x USB2.0, dual independent display and super graphic performance for variety needs and one PCI expansion available.
The NIFE 2310 is designed with universal concept to support any one of major fieldbus protocols without extra effort. With this high integration ability,
the NIFE 2310 is ease of use, replacement or installation with PROFIBUS, ProfiNET, DeviceNET, EtherCAT or Ethernet IP protocol, mainly for communication
protocol in factory automation.
Specifications
CPU Support
I/O Interface-Rear
ŒŒ On-Board Intel® Atom™ Dual Core D2550 processor, 1.86GHz, 1M L2
cache
ŒŒ Intel® 82801JIR ICH10 RAID
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Main Memory
ŒŒ 2 x DDR3 SO-DIMM sockets, support up to 4G DDR3-800/1066/1333
MHz SDRAM, un-buffered and non-ECC
Dual Independent Display Option
ŒŒ DVI-D + VGA (P/N: 60233VGA50X00, 1.8M cable, from DVI-I to VGA
male type)
ŒŒ DVI-D + DVI-D
I/O Interface-Front
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
22
ATX Power on/off switch
HDD access/power status LEDs
2 x DB9, RS232/422/485 w/ 2.5KV isolation protection
2 x USB2.0
4 x GPO & 4 x GPI
1 x Mic-in and 1 x Line-out
SIM card socket
CFast socket
1 x FieldBUS Port (for optional PROFIBUS, ProfiNET, DeviceNET,
EtherCAT, Ethernet IP master kit)
Factory Automation Solution Product Selection Guide
1 x 2-pin DC input, Support +9 to 36VDC input
1 x DVI-I
1 x DVI-D
4 x Intel® 82574IT GbE LAN ports; Support WoL, teaming and PXE
4 x USB2.0
2 x DB9, RS232/422/485
Device
ŒŒ 1 x 2.5" SATA HDD driver bay
ŒŒ 1 x External CFast socket
Optional Fieldbus Kit
ŒŒ FBI90E-PBM: Profibus Master card with cable and universal bracket
(P/N: 88J50090E03X0)
ŒŒ FBI90E-PNM: ProfiNET Master card with cable and universal bracket
(P/N: 88J50090E00X0)
ŒŒ FBI90E-DNM: DeviceNET Master card with cable and universal bracket
(P/N: 88J50090E04X0)
ŒŒ FBI90E-EP: Ethernet IP Master card with cable and universal bracket
(P/N: 88J50090E01X0)
ŒŒ FBI90E-ECM: EtherCAT Master card with cable and universal bracket
(P/N: 88J50090E02X0)
25.00
120.00
160.00
200.00
12.50
Dimension Drawing
90.00
96.00
195.00
204.80
216.80
Expansion
ŒŒ NIFE 2310: One PCI Expansion
Add-on card length: 130mm max.
Power consumption: 10W/ slot max.
Power Requirements
ŒŒ Support +9V to 36VDC input; Support ATX power mode
Dimensions
ŒŒ 195mm (W) x 200mm (D) x 90mm (H) (7.7" x 7.9" x 3.6")
Construction
ŒŒ Aluminum Chassis with fanless design
Environment
ŒŒ Operating temperature:
Ambient with air flow: -20°C to 65°C
ŒŒ Storage temperature: -30°C to 85°C
ŒŒ Relative humidity: 10% to 93% (Non-condensing)
ŒŒ Shock protection:
-- HDD: 20G, half sine, 11ms, IEC60068-2-27
-- CFast: 40G, half sine, 11ms, IEC60068-2-27
ŒŒ Vibration protection w/ HDD
-- Random: 0.5Grms @ 5~500 Hz according to IEC60068-2-64
-- Sinusoidal: 0.5Grms @ 5~500 Hz according to IEC60068-2-6
Ordering Information
Barebone
ŒŒ NIFE 2310 (P/N: A0J70231000X0)
Intel® Atom™ Dual Core D2550 Fanless System with DDR3 4 G memory
and Universal Fieldbus bracket and one PCI expansion
Optional Fieldbus kit
88J50090E00X0
88J50090E01X0
88J50090E02X0
88J50090E03X0
88J50090E04X0
FBI 90E-PNM KIT
FBI 90E-EP KIT
FBI 90E-ECM KIT
FBI 90E-PBM KIT
FBI 90E-DNM KIT
ProfINET Master Module Kit
Ethernet IP Master Module Kit
EtherCAT Master Module Kit
Profibus Master Module Kit
DeviceNet Master Module Kit
ŒŒ 19V 65W AC/DC power adapter w/ o power cord
(P/N: 7400065009X00)
Certifications
ŒŒ CE approval
ŒŒ FCC Class A
OS Support List
ŒŒ Windows XP 32bits
ŒŒ Windows 7 32bits
ŒŒ WinCE 7.0
Factory Automation Solution Product Selection Guide
23
NIFE 4000
3rd Generation Intel® Core™ i3/i5 rPGA Fanless System with
Isolation Power Module and Optional Fieldbus Modules
Main Features
ŒŒ Support 3rd generation Intel® Core™ i3/i5 rPGA socket type
processor
ŒŒ Intel® QM77 PCH
ŒŒ 2 x USB3.0 & 2 x USB2.0
ŒŒ 4 x Intel® GbE LAN Ports
ŒŒ 1 x DVI-I & 1 x VGA
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
2 x 2.5KV isolated RS232/422/485
1 x CFast socket
Two Mini-PCIe sockets
Support built-in +24VDC isolation power module
Support ATX power mode, WoL and PXE function
Support NVRAM 1Mb
Product Overview
Integrated with Intel® 3rd generation Core™ i3/i5 process, NIFE 4000 offers excellent computing performance. The QM77 PCH provides original USB3.0,
which ensures the high throughput and is suitable for the high bandwidth devices, such as industrial cameras. The four Intel® GbE LAN ports provide high
communication bandwidth and can be used to access GbE camera for surveillance and industrial automation projects. NIFE 4000 provides built-in optical
isolated digital input and digital output, 16 channels respectively. The LED indicators can be configured to show the status of the first four digital outputs.
All built-in I/O connectors of NIFE 4000 locate at the front panel. It makes the wiring and maintenance easier for typical installation style for factory
automation devices. Alone with well-proven fanless design experience of NEXCOM which ensures the stability, these make NIFE 4000 well fitting with
the factory automation applications.
Specifications
CPU Support
ŒŒ Support 3rd generation Intel® Core™ i5/i3 rPGA socket type processor
-- Core™ i5-3610ME, Dual Core, 2.7GHz, 3M Cache
-- Core™ i3-3120ME, Dual Core, 2.4GHz, 3M Cache
-- Support Three Independent Display with above processor
ŒŒ Intel® QM77 PCH chipset
Main Memory
ŒŒ 2 x DDR3/DDR3L SO-DIMM sockets, support dual channel up to 8 GB,
DDR3 1333 SDRAM, un-buffered and non-ECC
Display Option
ŒŒ Dual independent display
-- VGA
-- DVI-D
ŒŒ Three independent display
-- VGA
-- VGA output via optional Y-cable
-- DVI-D
I/O Interface
ŒŒ
ŒŒ
ŒŒ
ŒŒ
24
ATX power on/off switch
Power status LED
HDD/CFast access LEDs
RF access LED
Factory Automation Solution Product Selection Guide
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
COM ports access LEDs
2 x USB2.0 ports & 2 x USB3.0 ports
2 x 2.5KV isolated RS232/422/485 terminal connector
1 x DB44 for 16CH isolated DI and 16CH isolated DO
1 x VGA output & 1 x DVI-I output
4 x Intel® GbE LAN ports (with Intel® WG82574L & WG82579LM LAN
chip)
1 x PS/2 connector for keyboard and mouse
1 x Mic-in and 1 x Line-out
2-pin remote power on/off switch
2 x Optional I/O knockout for additional functions
Isolated Digital Input
ŒŒ 16CH 2.5KV optical isolated Digital Input
-- Digital logic levels
-- 0-24V, non-polarity type
-- Input low voltage (L): 0 ~ 1.5V
-- Input high voltage (H): 5 ~ 24V
-- Input resistance: 1.2kΩ @ 0.5W
-- Max. response frequency: 10KHz @ 50% duty
Isolated Digital Output
ŒŒ 16CH 2.5KV optical isolated Digital Output
ŒŒ Output type: Open-collector NPN Darlington transistor
ŒŒ Supply voltage: 5-35V
Dimension Drawing
69.00
4.50
Ø4.50
177.50
158.00
256.05
69.00
6.00
242.50
254.50
277.30
291.30
Ø8.00
Ø4.50
ŒŒ Sink current: 200mA max. for all channel @ 100% duty
Storge Device
ŒŒ 2 x External 2.5" HDD bay, cold swappable
ŒŒ 1 x External CFast socket
Expansion Slot
ŒŒ 2 x Mini-PCIe socket for optional fieldbus modules
Power Requirements
ŒŒ Built-in +24VDC isolation power module
Dimensions
ŒŒ 178mm (W) x 250mm (D) x 255mm (H) without wall mount bracket
Environment
ŒŒ Operating temperature:
Ambient with air flow: 0°C to 55°C (According to IEC60068-2-1,
IEC60068-2-2, IEC60068-2-14)
ŒŒ Storage temperature: -20°C to 80°C
ŒŒ Operating humidity: 10% ~ 90% relative humidity, non-condensing
Limits to be at 90% RH at max 40C
ŒŒ Shock protection: 20G, half sine, 11ms, IEC60068-2-27 with HDD
ŒŒ Vibration protection
Random: 0.5Grms @ 5 ~ 500 Hz according to IEC68-2-64
Sinusoidal: 0.5 Grms @ 5~500 Hz according to IEC68-2-6
Ordering Information
ŒŒ NIFE 4000 (P/N: 10J70400000X0)
3rd Generation Intel® Core™ i3/i5 rPGA Fanless System with Isolation
Power Module and Optional Fieldbus Modules
Optional Fieldbus kit
88J50090E00X0
88J50090E01X0
88J50090E02X0
88J50090E03X0
88J50090E04X0
FBI 90E-PNM KIT
FBI 90E-EP KIT
FBI 90E-ECM KIT
FBI 90E-PBM KIT
FBI 90E-DNM KIT
ProfINET Master Module Kit
Ethernet IP Master Module Kit
EtherCAT Master Module Kit
Profibus Master Module Kit
DeviceNet Master Module Kit
ŒŒ 24V, 120W AC/DC power adapter w/o power cord
(P/N: 7400120012X00)
Certifications
ŒŒ CE Approval
ŒŒ FCC Class A
ŒŒ LVD
OS Support Lists
ŒŒ Windows XP 32bits and 64bits
ŒŒ Windows 7 32bits and 64bits
ŒŒ Windows 8.1 32 bits and 64 bits
Factory Automation Solution Product Selection Guide
25
NIFE 4000P2
3rd Generation Intel® Core™ i3/i5 rPGA Fanless System with
Optional Fieldbus Modules and Two PCI Expansions
Main Features
ŒŒ Support 3rd generation Intel® Core™ i3/i5 rPGA socket type
processor
ŒŒ Intel® QM77 PCH
ŒŒ 2 x USB3.0 & 2 x USB2.0
ŒŒ 4 x Intel® GbE LAN Ports
ŒŒ 1 x DVI-I & 1 x VGA
ŒŒ 2 x 2.5KV isolated RS232/422/485
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
1 x CFast socket
One PCIex4 and One PCI expansion
Two Mini-PCIe sockets
Support +24VDC power input
Support ATX power mode, WoL and PXE function
Support NVRAM 1Mb
Product Overview
Integrated with Intel® 3rd generation Core™ i3/i5 process, NIFE 4000P2 offers excellent computing performance. The QM77 PCH provides original USB3.0,
which ensures the high throughput and is suitable for the high bandwidth devices, such as industrial cameras. The four Intel® GbE LAN ports provide high
communication bandwidth and can be used to access GbE camera for surveillance and industrial automation projects. NIFE 4000P2 provides built-in optical
isolated digital input and digital output, 16 channels respectively. The LED indicators can be configured to show the status of the first four digital
outputs. Two PCI expansions and two Mini-PCIe sockets are available, providing the expansion for Fieldbus interface. All built-in I/O connectors of
NIFE 4000P2 locate at the front panel. It makes the wiring and maintenance easier for typical installation style for factory automation devices. Alone with
well-proven fanless design experience of NEXCOM which ensures the stability, these make NIFE 4000P2 well fitting with the factory automation applications.
Specifications
CPU Support
ŒŒ Support 3rd generation Intel® Core™ i5/i3 rPGA socket type processor
-- Core™ i5-3610ME, Dual Core, 2.7GHz, 3M Cache
-- Core™ i3-3120ME, Dual Core, 2.4GHz, 3M Cache
-- Support Three Independent Display with above processors
ŒŒ Intel® QM77 PCH chipset
Main Memory
ŒŒ 2 x DDR3/DDR3L SO-DIMM sockets, support dual channel up to 8 GB,
DDR3 1333 SDRAM, un-buffered and non-ECC
Display Option
ŒŒ Dual independent display
-- VGA
-- DVI-D
ŒŒ Three independent display
-- VGA
-- VGA (output via optional Y-cable)
-- DVI-D (output via optional Y-cable)
I/O Interface
ŒŒ
ŒŒ
ŒŒ
ŒŒ
26
ATX power on/off switch
Power status LED
HDD/CFast access LEDs
RF access LED
Factory Automation Solution Product Selection Guide
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
COM ports access LEDs
2 x USB2.0 ports & 2 x USB3.0 ports
2 x 2.5KV isolated RS232/422/485 terminal connector
1 x DB44 for 16CH isolated DI and 16CH isolated DO
1 x VGA output & 1 x DVI-I output
4 x Intel® GbE LAN ports (with Intel® WG82574L & WG82579LM LAN
chip)
1 x PS/2 connector for keyboard and mouse
1 x Mic-in and 1 x Line-out
2-pin remote power on/off switch
2 x Optional I/O knockout for additional functions
Isolated Digital Input
ŒŒ 16CH 2.5KV optical isolated Digital Input
ŒŒ Digital logic levels
-- 0-24V, non-polarity type
-- Input low voltage (L): 0 ~ 1.5V
-- Input high voltage (H): 5 ~ 24V
-- Input resistance: 1.2kΩ @ 0.5W
-- Max. response frequency: 10KHz @ 50% duty
Isolated Digital Output
ŒŒ 16CH 2.5KV optical isolated Digital Output
ŒŒ Output type: Open-collector NPN Darlington transistor
ŒŒ Supply voltage: 5-35V
Dimension Drawing
88.00
4.50
Ø4.50
215.50
196.00
256.00
6.00
88.00
242.50
254.50
277.30
291.30
Ø8.00
4.50
ŒŒ Sink current: 200mA max. for all channel @ 100% duty
Storge Device
ŒŒ 2 x Internal 2.5" HDD bay
ŒŒ 1 x External CFast socket
Expansion Slot
ŒŒ 2 x Mini-PCIe socket for optional fieldbus modules
ŒŒ 2 x PCI expansion (10W max. per slot )
ŒŒ Add-on card length: 220mm max.
Ordering Information
ŒŒ NIFE 4000P2 (P/N: 10J70400005X0)
3rd Generation Intel® Core™ i3/i5 rPGA Fanless System with Optional
Fieldbus Modules and Two PCI Expansions
Optional Fieldbus kit
ŒŒ Typical DC input: 24VDC (Range: 21.6V ~ 26.4V)
88J50090E00X0
88J50090E01X0
88J50090E02X0
88J50090E03X0
88J50090E04X0
Dimensions
ŒŒ 24V, 120W AC/DC power adapter w/o power cord
Power Requirements
ŒŒ 216mm (W) x 250mm (D) x 255mm (H) without wall mount bracket
Environment
FBI 90E-PNM KIT
FBI 90E-EP KIT
FBI 90E-ECM KIT
FBI 90E-PBM KIT
FBI 90E-DNM KIT
ProfINET Master Module Kit
Ethernet IP Master Module Kit
EtherCAT Master Module Kit
Profibus Master Module Kit
DeviceNet Master Module Kit
(P/N: 7400120012X00)
ŒŒ Operating temperature:
Ambient with air flow: 0°C to 55°C (According to IEC60068-2-1,
IEC60068-2-2, IEC60068-2-14)
ŒŒ Storage temperature: -20°C to 80°C
ŒŒ Operating humidity: 10% ~ 90% relative humidity, non-condensing
Limits to be at 90% RH at max 40C
ŒŒ Shock protection: 20G, half sine, 11ms, IEC60068-2-27 with HDD
ŒŒ Vibration protection
Random: 0.5Grms @ 5 ~ 500 Hz according to IEC68-2-64
Sinusoidal: 0.5 Grms @ 5~500 Hz according to IEC68-2-6
Certifications
ŒŒ CE Approval
ŒŒ FCC Class A
ŒŒ LVD
OS Support Lists
ŒŒ Windows XP 32bits and 64bits
ŒŒ Windows 7 32bits and 64bits
ŒŒ Windows 8.1 32 bits and 64 bits
Factory Automation Solution Product Selection Guide
27
NISE 105/105A
Intel® Atom™ Processor E3826 Dual Core Fanless System
Main Features
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Onboard Intel® Atom™ processor E3826 dual core, 1.46GHz
Dual Independent Display from DVI-I and HDMI
2 x Intel® I210 GbE LAN ports support WoL, Teaming and PXE
2 x USB2.0 & 1 x USB3.0
4 x RS232/422/485
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Support optional Wi-Fi/3.5G/4G/Fieldbus Mini-PCIe Modules
External RTC battery holder for easy replacement
Support -20 ~ 70 degree C extended operating temperature
Support 9-30VDC input
Product Overview
Powered by the latest generation of Intel® Atom™ processor E3826 (formerly codenamed "Bay Trail-I"), the NISE 105 provides outstanding performance
not only on computing but also on graphics, and it presents a brand new opportunity for both intelligent and industrial computing solutions. NISE 105
supports up to 4G DDR3L memory and have several options on storage devices like CFast, HDD and SSD. The NISE 105 is also the 1st system in Compact
NISE 100 series to support extended operating temperature from -20 upto 70 degree C with wide DC input range from 9-30VDC. In addition to no cable
connection on the NISE 105, it brings NISE 105 the sustainability to work in harsh environment both with temperature and vibration concern. The
NISE 105 has high integration ability with optional Mini-PCIe module and 4 x COM ports, which makes it a real intelligent system for various applications
such as factory automation applications (with optional PROFIBUS, ProfiNET, DeviceNET, EtherCAT, Ethernet IP master module), network applications
(with optional GbE LAN, Wi-Fi, 3.5G/4G LTE module) and communication applications (with optional GPIO, RS232/422/485). NISE 105 is definitely the
top choice for M2M intelligent system and factory automation platforms.
Specifications
ŒŒ 1 x DDR3L SO-DIMM Socket, Support DDR3L 1066/1333 4GB RAM
max., un-buffered and non-ECC
ŒŒ 1 x USB3.0 (900mA per each)
ŒŒ 1 x USB2.0 (500mA per each)
ŒŒ 2 x DB9 for COM1 & COM2, both support RS232/422/485 with auto
flow control
-- Jumper-free setting on RS232/422/485
-- Support 5V/12V/Ring function by jumper setting, Ring as the
default (COM2 Only)
ŒŒ 1 x Remote Power ON/OFF Switch
ŒŒ 1 x 2-pin DC input, support +9 to 30VDC input
Display Option
I/O Interface - Rear
ŒŒ Dual Independent Display
-- HDMI and DVI-D
-- HDMI and VGA (via DVI-I to VGA converter)
ŒŒ
ŒŒ
ŒŒ
ŒŒ
CPU Support
ŒŒ Onboard Intel® Atom™ processor E3826 Dual Core, 1.46GHz
ŒŒ Support Intel® Atom™ E3800 processor family from Single Core
E3815, Dual Core E3825/E3826/E3827 and Quad Core E3845 with
difference SKUs
Main Memory
I/O Interface-Front
ŒŒ ATX power on/off switch
ŒŒ 1 x Power Status/1 x HDD Access/1 x Battery Low/ 1 x Programing
LEDs
ŒŒ 1 x External CFast socket
ŒŒ 1 x SIM Card holder
ŒŒ 2 x Intel® I210IT GbE LAN Ports, support WoL, Teaming and PXE
ŒŒ 1 x DVI-I Display Output
28
Factory Automation Solution Product Selection Guide
1 x USB2.0
1 x HDMI
1 x RTC Battery
2 x DB9 for COM3 & COM4, both support RS232/422/485 with auto
flow control
ŒŒ 1 x Mic-in & 1 x Line-out
ŒŒ 2 x Antenna Holes for optional Wi-Fi/3.5G antenna
ŒŒ 1 x Optional I/F for optional Mini-PCIe Wi-Fi/3.5G/Hilscher Automation
module output
I/O Interface - Internal
ŒŒ 4 x GPI and 4 GPO (5V, TTL Type)
131
94
115
60
25
Dimension Drawing
185
194
60
54
206
Storage Device
Certifications
ŒŒ 1 x CFast (SATA 2.0)
ŒŒ 1 x 2.5" HDD (SATA 2.0)
ŒŒ 1Mb NVRAM (on NISE105A Only)
ŒŒ CE
ŒŒ FCC Class A
Expansion Slot
Ordering Information
ŒŒ 1 x Mini-PCIe socket for optional Wi-Fi/3.5G/Fieldbus modules
Power Requirement
ŒŒ Power input: +9VDC to +30VDC
ŒŒ 1 x optional 24V, 60W power adapter
Support OS
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Windows 8, 32bit/64bit
Windows Embedded Standard 8, 32bit/64bit
Windows 7, 32bit/64bit
Windows Embedded Standard 7, 32bit/64bit
Windows Embedded Compact 7, 32bit
Linux Kernel version 3.8.0
ŒŒ NISE 105 (P/N: 10J00010501X0)
Intel® Atom™ Processor E3826 Dual Core Fanless System
ŒŒ NISE 105A (P/N: 10J00010500X0)
Intel® Atom™ Processor E3826 Dual Core All in one Fanless System
ŒŒ 24V, 60W AC/DC power adapter w/ o power cord
(P/N: 7400060023X00)
Dimensions
ŒŒ 185mm (W) x 131mm (D) x 54mm (H) without wall-mount bracket
Construction
ŒŒ Aluminum and Metal Chassis with fanless design
Environment
ŒŒ Operating Temperature:
Ambient with air flow: -20°C to 70°C with industrial grade device
(According to IEC60068-2-1, IEC60068-2-2, IEC60068-2-14)
ŒŒ Storage Temperature: -30°C to 85°C
ŒŒ Relative Humidity: 10% to 95% (non-Condensing)
ŒŒ Shock Protection:
-- HDD: 20G, half sine, 11ms, IEC60068-27
-- CFast: 50G, half sine, 11ms, IEC60068-27
ŒŒ Vibration Protection w/ HDD Condition:
-- Random: 0.5Grms @ 5~500 Hz, IEC60068-2-64
-- Sinusoidal: 0.5Grms @ 5~500 Hz, IEC60068-2-6
ŒŒ Vibration Protection w/ CFast & SSD Condition:
-- Random: 2Grms @ 5~500 Hz, IEC60068-2-64
-- Sinusoidal: 2Grms @ 5~500 Hz, IEC60068-2-6
Factory Automation Solution Product Selection Guide
29
NISE 300
4th Generation Intel® Core™ i5 Fanless System with
6 x Mini-PCIe Expansion and Front Access I/O Design
Main Features
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Onboard BGA type 4th Generation Intel® Core™ i5 Processor
Mobile Intel® QM87 PCH
2 x USB3.0; 2 x USB2.0
6 x Mini-PCIe, 2 x RS232/422/485 with Auto Flow
Support 1 x mSATA, 1 x CFast and 2 x 2.5" SATA
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
User-friendly I/O Design with all I/O Interface at front
6 x Mini-PCIe socket for optional Wi-Fi/3.5G/4G/Fieldbus modules
Support 9-30V DC input, ATX mode
Easy Replacement for RTC Battery
Dual Intel® GbE LAN Ports, Support WoL, Teaming & PXE
Product Overview
The high performance NISE 300, which is integrated with 4th generation Intel® Core™ i5 processor and QM87 PCH, can provide outstanding
system performance and presents a brand new opportunity for both intelligent and industrial computing solutions. NISE 300 supports up
to 8G un-buffered and non-ECC DDR3/DDR3L memory, CFast , SATA3.0, the latest USB3.0 technology. Support +9V ~ +30VDC input and the
operating temperature range is from -5 Celsius degree to 55 Celsius degree. NISE 300 comes with user-friendly I/O design; all I/O interfaces
are at front panel and it makes system much easier to use and to expand the functionalities. It's mechanical design also fits with 2U 19" rackmount dimension. NISE 300 also integrates with 6 Mini-PCIe sockets and 2 COM Port interfaces, which makes it a real versatile box for
various applications such as factory automation applications (PROFIBUS, DeviceNet, EtherCAT, PROFINET, Ethernet/IP), network applications
(GbE LAN, Wi-Fi, GSM), and storage devices (mSATA). With the latest features and flexible module expansions, NISE 300 is definitely the top choice for
M2M intelligence and factory automation platforms.
Specifications
CPU Support
ŒŒ Onboard BGA type 4th generation Intel® Core™ i5 processor
ŒŒ Core™ i5-4402E, Dual Core™, 1.6GHz
Main Memory
ŒŒ 2 x DDR3/DDR3L SO-DIMM Socket, support up to 8GB DDR3/DDR3L
1333/1600 RAM, un-buffered and non-ECC
Display Option
ŒŒ Three Independent Display
-- VGA+DVI-D (Through DVI-I Y Cable) + HDMI
ŒŒ Dual Independent Display
-- DVI-D + VGA
-- HDMI + VGA
Front I/O Interface
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
30
ATX power on/off switch
1 x Remote Power ON/OFF Switch
1 x Power Status/1 x HDD Access LEDs
2 x USB3.0 ports (Blue Color, 900mA per each)
2 x USB2.0 Ports (500mA per each)
1 x DVI-I, 1 x HDMI
2 x DB9 for COM1 & COM2
-- support RS232/422/485 with Auto Flow Control
Factory Automation Solution Product Selection Guide
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
-- support 5V/12V/Ring function by jumper setting
2 x Intel® 82574L GbE LAN Ports, Support PXE/Teaming/WoL
1 x External CFast socket
1 x SIM Card holder
1 x External RTC Li-ion Battery holder
1 x Line-out and 1 x Mic-in
Internal I/O Interface
ŒŒ
ŒŒ
ŒŒ
ŒŒ
4 x GPI and 4 GPO (5V, TTL Type)
4 x COM Ports Box Header (RS232 only)
1 x USB2.0 Internal Connector, for USB dongle
2 x USB2.0 Internal Box Header
Storage Device
ŒŒ 1 x CFast (SATA 3.0)
ŒŒ 1 x mSATA (SATA 3.0)
ŒŒ 2 x 2.5" HDD (SATA 3.0)
Expansion Slot
ŒŒ 1 x Mini-PCIe socket for GSM/Wi-Fi
1 x Mini-PCIe socket for mSATA
4 x Mini-PCIe socket for expansion modules
Dimension Drawing
212
333
80
86.30
310
Power Requirement
ŒŒ ATX Power Mode
ŒŒ Typical +9V ~ +30VDC Input
ŒŒ Power adapter: Optional AC to DC power adapter (+19VDC, 120W)
Dimensions
ŒŒ 310mm (W) x 212mm (D) x 80mm (H) without Wall-Mount bracket
Construction
Ordering Information
Barebone
ŒŒ NISE 300 System (P/N: 10J00030000X0)
ŒŒ 19V, 120W AC to DC power adapter w/ o power core
(P/N:7400120013X00)
ŒŒ Aluminum and Metal Chassis with fanless design
Environment
ŒŒ Operating Temperature:
Ambient with air flow: -5°C to 55°C (According to IEC60068-2-1,
IEC60068-2-2, IEC60068-2-14)
ŒŒ Storage Temperature: -40°C to 85°C
ŒŒ Operating humidity: 10% ~ 90% relative humidity, non-condensing
Limits to be at 90% RH at max 40C
ŒŒ Shock Protection:
HDD: 20G, half sine, 11ms, IEC60068-27
CFast: 50G, half sine, 11ms, IEC60068-27
ŒŒ Vibration Protection w/ HDD Condition:
Random: 0.5Grms @ 5~500 Hz, IEC60068-2-64
Sinusoidal: 0.5Grms @ 5~500 Hz, IEC60068-2-6
Certifications
ŒŒ CE Approval
ŒŒ FCC Class A
ŒŒ LVD
OS Support Lists
ŒŒ Windows 7 32bits and 64bits
ŒŒ Windows 8.1 32 bits and 64 bits
Factory Automation Solution Product Selection Guide
31
NISE 301
Intel® Atom ™ Quad Core E3845 Fanless System
with 2 x Mini-PCIe Expansion and Front Access I/O Design
Main Features
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Onboard Intel® Atom™ processor E3845 Quad Core, 1.91GHz
2 x Intel® I210AT GbE LAN ports, support WoL, Teaming and PXE
2 x RS232/422/485, 3x USB2.0, 1x CFast socket
2 x Mini-PCIe socket for optional Wi-Fi /3.5G/4G/Fieldbus modules
ŒŒ Support Dual Independent Display with VGA and DVI-D
ŒŒ External RTC Battery Holder
ŒŒ Typical 24V DC input with +/-20% range
Product Overview
NISE 301 is a new fanless PC designed for space-critical applications. It features Intel® 4th generation Atom™ processor, 2 x mini-PCIe expansions and
a front access I/O design. Measuring at 205mm (W) x 160mm (D) x 80mm (H), NISE 301 can fit into any 2U 19" rackmount shelf or cabinet easily.
Designed with versatility and cost efficiency in mind, NISE 301 supports 2 x mini-PCIe expansions that can be configured with different add-on
modules to suit different applications. For example, in fieldbus concentrator applications, NISE 301 can be fitted with two different fieldbus
interfaces (PROFIBUS, DeviceNet, EtherCAT, PROFINET, and EtherNet/IP protocols) simultaneously and provide master and slave communication
with PLC and I/O devices. In IoT applications, NISE 301 can be configured with a WLAN/Wi- Fi/LTE interface and RS232/422/485/GPIO interface for
wireless communication and field device control.
In addition, NISE 301 also bundles NEXCOM's latest Xcare™ 3.0 remote management utility to provide advanced provisioning features such as
real-time platform monitoring, virus protection and system image restore.
Specifications
CPU Support
ŒŒ Onboard Intel Atom™ processor E3845 Quad Core, 1.91GHz
®
Main Memory
ŒŒ 1 x DDR3L SO-DIMM Socket, support up to 4GB with un-buffered and
non-ECC
Display Option
ŒŒ Dual Independent Display
-- DVI-D + VGA
Front I/O Interface Status LEDs
ŒŒ 1 x Power Status, 1 x HDD Access LEDs
ŒŒ 2 x Tx/Rx LEDs, 1 x C-Fast LEDs
ŒŒ 4 x GPO Status, 1 x Battery Low LEDs
Front I/O Interface
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
32
1 x ATX power on/off switch
1 x VGA, 1 x DVI-D
3 x USB2.0 Ports (500mA per each)
2 x Intel® GbE LAN ports (I210AT); Support WoL, Teaming and PXE
2 x RS232/422/485 with auto flow control
2 x Antenna Holes for Wi-Fi/GSM
1 x External C-Fast socket
Factory Automation Solution Product Selection Guide
ŒŒ 1 x SIM Card holder
ŒŒ 1 x External RTC Li-ion Battery holder
Expansion Slot
ŒŒ 2 x Mini-PCIe expansion slots
-- optional PROFIBUS, ProfiNET, DeviceNET, EtherCAT, Ethernet IP
master/salve module
-- optional GbE LAN, Wi-Fi, 3.5G module
-- optional GPIO, RS232/422/485 module
Storage Device
ŒŒ 1 x CFast (SATA3.0)
ŒŒ 1 x 2.5" HDD (SATA3.0)
Power Requirement
ŒŒ ATX Power mode (AT power mode by jumper setting)
ŒŒ Power input: Typical +24Vdc +/-20%
ŒŒ Power adapter: Optional AC to DC power adapter (+24Vdc, 60W)
Dimensions
ŒŒ 205mm (W) x 160mm (D) x 80mm (H) without Wall-Mount bracket
Construction
ŒŒ Aluminum and Metal Chassis with fanless design
25
60
94
115
160
Dimension Drawing
80
86
205
219
231
Environment
ŒŒ Operating Temperature:
Ambient with air flow: -5°C to 55°C (According to IEC60068-2-1,
IEC60068-2-2, IEC60068-2-14)
ŒŒ Storage Temperature: -20°C to 85°C
ŒŒ Relative Humidity: 10% ~ 93% (Non-Condensing)
ŒŒ Shock Protection:
HDD: 20G, half sine, 11ms, IEC60068-27
CFast: 50G, half sine, 11ms, IEC60068-27
ŒŒ Vibration Protection w/ HDD Condition:
Random: 0.5Grms @ 5~500 Hz, IEC60068-2-64
Sinusoidal: 0.5Grms @ 5~500 Hz, IEC60068-2-6
Barebone
ŒŒ NISE 301 System (P/N: 10J00030100X0)
ŒŒ 24V, 60W AC to DC power adapter w/ o power core
(P/N: TBD)
Certifications
ŒŒ CE Approval
ŒŒ FCC Class A
ŒŒ LVD
OS Support Lists
ŒŒ Windows 7 32bits and 64bits
ŒŒ Windows 8.1 32 bits and 64 bits
Ordering Information
Factory Automation Solution Product Selection Guide
33
NISE 2400
Intel® Atom™ Processor E3827 Dual Core Fanless System
Main Features
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Onboard Intel® Atom™ processor E3827 Dual Core, 1.75GHz
Dual independent display from DVI-I and HDMI
2 x Intel® I210IT GbE LAN ports support WoL, Teaming and PXE
4 x USB2.0 & 1 x USB3.0
2 x RS232/422/485 with auto flow control
ŒŒ 2 x Mini-PCIe socket for optional mSATA/Wi-Fi/4G/3.5G/Fieldbus
modules
ŒŒ Support -20 ~ 70 degree Celus extended operating temperature
ŒŒ Support 9-30V DC input
Product Overview
Powered by Intel® Atom™ Bay Trail Dual Core processor E3827, 1.75GHz. Driven by the latest Dual Core Intel® Atom™ processor, NISE 2400 can
provide excellent computing power and is more power-efficient than the platforms based on the previous generation Intel® Atom™ product family.
NISE 2400 supports up to 8G DDR3L memory and have several options on storage devices like C-Fast, HDD, SSD or mSATA . The NISE2400 comes
with 1 x HDMI, 1 x DVI-I, 2 x Gigabit LAN ports, 2x COM port with RS232/422/485 and 5x USB ports including one USB3.0. NISE 2400 supports 9~30V
DC input, and can be operated in an extended operating temperature range from -20 to 70 degrees Celsius. This Fanless system supports two MiniPCIe modules, Which can be an excellent platform for network applications (with optional GbE LAN, Wi-Fi, 3.5G/4G LTE module) and communication
applications such expansion versatility makes NISE 2400 a perfect platform for factory automation and M2M intelligence applications.
Specifications
CPU Support
I/O Interface - Rear
ŒŒ Onboard Intel® Atom™ processor E3827 Dual Core, 1.75GHz
ŒŒ Support Intel® Atom™ E3800 processor family from single core E3815,
dual core E3825/E3826/E3827 and quad core E3845 with difference
SKUs
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Main Memory
ŒŒ 2 x DDR3L SO-DIMM socket, support DDR3L 1066/1333 8GB RAM
max., un-buffered and non-ECC
Display Option
ŒŒ Dual independent display
-- HDMI and DVI-D
-- HDMI and VGA (via DVI-I connector)
Front I/O Interface
ŒŒ ATX power on/off switch
ŒŒ 1 x Power Status, 1 x HDD access, 1 x battery low, 4 x programming
LEDs, 4 x Tx / Rx LEDs, 2 x LAN LEDs
ŒŒ 2 x DB9 RS232 for COM1 & COM2
ŒŒ 1 x External CFast socket
ŒŒ 1 x SIM card holder
ŒŒ 1 x USB3.0 (900mA per each)
ŒŒ 1 x Mic-in & 1 x Line-out
ŒŒ 2 x antenna holes for optional Wi-Fi/3.5G antenna
34
Factory Automation Solution Product Selection Guide
4 x USB2.0
1 x DVI-I display output
1 x HDMI display output
1 x remote power on/off switch
2 x Intel® I210IT GbE LAN ports, support wake on LAN, Teaming and PXE
2 x DB9 for COM3 & COM4, both support RS232/422/485 with auto
flow control
-- Jumper-free setting on RS232/422/485
ŒŒ 1 x 3-pin DC input, support +9 to 30VDC input
I/O Interface - Internal
ŒŒ 4 x GPI and 4 GPO (5V, TTL Type)
Storage Device
ŒŒ 1 x CFast card socket
ŒŒ 1 x 2.5" HDD space
ŒŒ 1 x mSATA from miniPCI socket if SATA HDD is not installed
Expansion Slot
ŒŒ 2 x Mini-PCIe socket for optional Wi-Fi/4G/3.5G/Fieldbus modules
Power Requirement
ŒŒ Power input: +9Vdc to +30Vdc
ŒŒ 1 x optional 24V, 60W power adapter
25
120
160
200
Dimension Drawing
Dimensions
ŒŒ 191mm (W) x 200mm (D) x 60mm (H) without wall-mount bracket
71
65
194.49
204.80
216.80
Ordering Information
Construction
Barebone
ŒŒ Aluminum and metal chassis with fanless design
ŒŒ NISE 2400 (P/N: TBD)
Environment
ŒŒ Operating Temperature:
Ambient with air flow: -20°C to 70°C (According to IEC60068-2-1,
IEC60068-2-2, IEC60068-2-14)
ŒŒ Storage temperature: -30°C to 85°C
ŒŒ Relative humidity: 10% to 95% (non-condensing)
ŒŒ Shock Protection:
HDD: 20G, half sine, 11ms, IEC60068-27
CFast: 50G, half sine, 11ms, IEC60068-277
ŒŒ Vibration Protection w/ HDD Condition:
Random: 0.5Grms @ 5~500 Hz, IEC60068-2-64
Sinusoidal: 0.5Grms @ 5~500 Hz, IEC60068-2-6
ŒŒ Vibration protection w/ CFast & SSD condition:
Random: 2Grms @ 5~500 Hz, IEC60068-2-64
Sinusoidal: 2Grms @ 5~500 Hz, IEC60068-2-6
Certifications
ŒŒ CE
ŒŒ FCC Class A
OS Support Lists
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Windows 8
Windows Embedded Standard 8
Windows 7
Windows Embedded Standard 7
Windows Embedded Compact 7
Linux Kernel version 3.8.0
Factory Automation Solution Product Selection Guide
35
NISE 3600E
3600
3rd Generation Intel® Core™ i7/i5/i3 Fanless System
with one PCIex4 Expansion
Main Features
Support 3rd generation Intel® Core™ i7/i5/i3 rPGA socket type processor
Mobile Intel® QM77 PCH
Support 1 x 2.5" SATA HDD or 2 x SATA DOM
1 x VGA, 1 x DVI-D and 2 x Display port with Independent Display
support
®
ŒŒ Dual Intel GbE LAN ports; Support WoL, teaming & PXE
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
4 x USB3.0, 2 x USB2.0, 5 x RS232 and 1 x RS232/422/485
1 x internal Mini-PCIe socket support optional Wi-Fi or 3.5G module
1 x external CFast socket & 1 x SIM card socketSupport
Support +9V to 30VDC input; Support ATX power mode
One PCIex4 expansion
Product Overview
Integrated with 3rd generation Intel® Core™ i7/i5/i3 with QM77 PCH platform, NISE series evolve to a new generation called NISE 3600E series. It
is not only sustained its good reputation on quality and user friendly features but also innovated its mechanical design.
With computing and graphic performance enhancement, NISE 3600E series supports 2 x display port, 1 x VGA port and 1 x DVI-D port to fulfill
the graphic intensive or computing oriented applications, including Auto Optical Inspection, Machinery Automation, ePolice infotainment,
Surveillance or Image Processing equipment and Healthcare industry. In addition, NISE 3600E series offers 4 x USB3.0 and 2 x USB2.0, greater
expansion capability with 2 x Intel® GbE LAN ports, 6 x COM ports, and 1 x external CFast socket for front accessible availability. NISE 3600E series
is sufficient to support wide range of DC input from +9 to 30V and ATX power; it is a new generation to meet most application requirements.
Specifications
-- Display Port and Display Port
CPU Support
ŒŒ Support 3rd Generation Intel® Core™ i7/i5/i3 rPGA Socket Type
Processor
-- Core™ i7-3612QM, Quad Core, 3.1 GHz, 6M Cache
-- Core™ i5-3610ME, Dual Core, 2.7GHz, 3M Cache
-- Core™ i3-3120ME, Dual Core, 2.4GHz, 3M Cache
-- Support Three Independent Display with above processors
ŒŒ Support 2nd generation Intel® Core™ i5/i3 rPGA Socket Type
Processor
-- Core™ i5-2510E, Dual Core, 2.5GHz, 3M Cache
-- Celeron® B810, Dual Core, 1.6GHz, 2M Cache
-- Support Dual Independent Display with above processors
Main Memory
ŒŒ 2 x DDR3 SO-DIMM socket, supports up to 8GB DDR3/DDR3L
1333/1600 SDRAM, with un-buffered and non-ECC
Display Option
ŒŒ Three Independent Display (only support on 3rd Generation
Processor)
-- Two Display Port and 1 x VGA
-- Two Display Port and 1 x DVI-D
ŒŒ Dual Independent Display
-- VGA and DVI-D
-- Display Port and VGA
-- Display Port and DVI-D
36
Factory Automation Solution Product Selection Guide
I/O Interface-Front
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ATX power on/off switch
HDD Access/Power status LEDs
2 x USB3.0 ports (Blue Color)
2 x Display Port (Can be converted to DVI-D or HDMI via active cables)
2 x Antenna holes
1 x external CFast
1 x SIM card socket
I/O Interface-Rear
ŒŒ 2 x DB9 for COM5 & COM6 (RS232)
ŒŒ 1 x DB44 Serial Port for 4 x COM port
-- COM1/COM3/COM4: RS232
-- COM2: RS232/422/485
ŒŒ 2 x Intel® GbE LAN ports (Intel® 82574L and 82579LM); Support WoL,
teaming and PXE
ŒŒ 2 x USB2.0 ports
ŒŒ 2 x USB3.0 ports (Blue Color)
ŒŒ 1 x DB15 VGA port
ŒŒ 1 x DVI-D port
ŒŒ 1 x Line-out and 1 x Mic-in
ŒŒ 2-pin Remote Power on/off switch
ŒŒ +9V to 30VDC input
272.00
264.00
234.00
204.00
68.00
Dimension Drawing
214.66
224.68
236.68
92.73
100.73
Storage Device
OS Support Lists
ŒŒ 1 x CFast socket
ŒŒ 1 x 2.5" SATA HDD or 2 x SATA DOM
ŒŒ SATA DOM: support 90°C horizontal type only
ŒŒ Windows XP 32bits and 64bits
ŒŒ Windows 7 32bits and 64bits
ŒŒ Windows 8.1 32 bits and 64 bits
Expansion Slot
ŒŒ One PCIex4 Expansion Slot
-- Add-on card length: 169mm max.
-- Power consumption: 10W/ slot max.
ŒŒ 1 x Mini-PCIe socket (support optional Wi-Fi or 3.5G module)
Power Requirements
ŒŒ ATX power mode
ŒŒ OnBoard DC to DC power support from 9V to 30VDC
ŒŒ Optional power adapter
Dimensions
ŒŒ 215mm (W) x 272mm (D) x 93mm (H) without wall mount bracket
(8.5" x 10.7" x 4.5")
Construction
ŒŒ Aluminum Chassis with fanless design
Environment
ŒŒ Operating temperature:
Ambient with air flow: -5°C to 55°C
Ambient with air flow: -5°C to 50°C if using Core™ i7-3612QM
(According to IEC60068-2-1, IEC60068-2-2, IEC60068-2-14)
ŒŒ Storage temperature: -20°C to 80°C
ŒŒ Relative humidity: 95% at 40°C
ŒŒ Shock protection:
-- HDD: 20G, half sine, 11ms, IEC60068-2-27
-- CFast: 50G, half sine, 11ms, IEC60068-2-27
ŒŒ Vibration protection w/ HDD Condition
-- Random: 0.5Grms @ 5~500 Hz according to IEC60068-2-64
-- Sinusoidal: 0.5Grms @ 5~500 Hz according to IEC60068-2-6
Ordering Information
Barebone
ŒŒ NISE 3600E (P/N: 10J00360000X0)
3rd Generation Intel® Core™ i5/i3 rPGA Fanless System with one
PCIex4 Expansion
ŒŒ NISE 3600E2 (P/N: 10J00360001X2)
3rd Generation Intel® Core™ i5/i3 rPGA Fanless System with two
PCIex4 Expansion
ŒŒ NISE 3600P2 (P/N: 10J00360002X0)
3rd Generation Intel® Core™ i5/i3 rPGA Fanless System with two PCI
Expansion
ŒŒ NISE 3600P2E (P/N: 10J00360003X0)
3rd Generation Intel® Core™ i5/i3 rPGA Fanless System with one PCI
Expansion and one PCIex4 Expansion
ŒŒ 19V, 120W AC/DC power adapter w/ o power core
(P/N: 7410120002X00)
Certifications
ŒŒ CE approval
ŒŒ FCC Class A
ŒŒ UL
Factory Automation Solution Product Selection Guide
37
NISE 3640E2/P2/P2E
3rd Generation Intel® Core™ i7 Fanless System
with 4 x LANs, 6 x COMs and PCI/PCIe Expansion
Main Features
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
OnBoard 3rd generation Intel® Core™ i7 BGA processor
Mobile Intel® QM77 PCH
Support 1 x 2.5" SATA HDD or 2 x SATA DOM
2 x Display Port; 1 x VGA; 1 x DVI-D; 2 x USB3.0; 2 x USB2.0
4 x Intel® 82574IT GbE LAN ports; Support WoL, teaming and PXE
ŒŒ 2 x DB9 for RS232/422/485; 1 x DB44 Serial Port for 4 x RS232
ŒŒ 2 x Mini-PCIe sockets (Top side Mini-PCIe Socket support optional
Wi-Fi or 3.5G module)
ŒŒ 1 x CFast socket; 1 x SIM card socket
ŒŒ Support +24VDC input; Support ATX Power mode
ŒŒ Support PCI or PCIe expansion
Product Overview
Integrated with 3rd generation Intel® Core™ i7 with QM77 PCH platform, NISE 3640E2/P2/P2E designed with 4 x Intel® 82574IT GbE LAN controllers which
can supports up to 4 cameras and better throughput; besides, 3640E2/P2/P2E also supports WoL, LAN teaming and PXE function. With computing and
graphic performance enhancement, NISE 3640E2/P2/P2E supports 3 independent display and delivers a level of performance ideal for image and vision
measurement on traffice control, overspeed monitoring, real time update and ePlice. More, NISE 3640E2/P2/P2E supports 2 x RS232/422/485, 4 x RS232,
2 x USB3.0, 2 x USB2.0, 1 x CFast socket, 1 x SIM card socket, and 1 x internal Mini-PCIe socket supports optional Wi-Fi or 3.5G module. In NISE 3640E series,
multiple chooses for PCI or PCIe expansion is also supported here.
Leveraging a reliable fanless, durable cable-free design and wide operating temperature, 3640E2/P2/P2E can be exhibited in harsh environments, where
severe temperature variation and vibration may exist.
Specifications
CPU Support
ŒŒ OnBoard 3rd generation Intel® Core™ i7 BGA processor
CoreTM i7-3517UE, Dual Core, 1.7GHz, 4M Cache
ŒŒ Mobile Intel® QM77 PCH
Main Memory
ŒŒ On-board 2 x DDR3/DDR3L SO-DIMM, supports up to 8GB DDR3/
DDR3L 1333/1600 SDRAM, with un-buffered and non-ECC
ŒŒ Pre-install 4G Industrial Grade Memory as the manufacture
configuration for shipment
Display Option
ŒŒ Three Independent Display (only support on 3rd Generation
Processor)
-- Two Display Port and 1 x VGA
-- Two Display Port and 1 x DVI-D
ŒŒ Dual Independent Display
-- VGA and DVI-D
-- Display Port and VGA
I/O Interface-Front
ŒŒ ATX power on/off switch
ŒŒ HDD access/Power status/LAN status LEDs
ŒŒ 2 x USB3.0 (Blue color)
38
Factory Automation Solution Product Selection Guide
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
2 x USB2.0
2 x Display Port (Can be converted to DVI-D or HDMI via active cables)
1 x CFast socket
1 x SIM card socket
2 x Antenna holes
I/O Interface-Rear
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
2 x DB9 for RS232/422/485
1 x DB44 for 4 x RS232
4 x Intel® 82574IT GbE LAN ports; Support WoL, teaming and PXE
1 x DB15 VGA port
1 x DVI-D
1 x Line-out and 1 x Mic-in
2-pin Remote Power on/off switch
+24VDC Input
Storage Device
ŒŒ 1 x 2.5" SATA HDD or 2 x SATA DOM (support 90°C horizontal type
only)
ŒŒ 1 x CFast socket
Expansion Slot
ŒŒ NISE 3640E2: Two PCIex4 expansion
-- Add-on card length: One 169mm max. and One 240mm max.
-- Power consumption: 10W/ slot max.
272.00
264.00
234.00
204.00
68.00
Dimension Drawing
113.73
121.73
214.98
224.68
236.68
ŒŒ NISE 3640P2: Two PCI expansion
-- Add-on card length: One 169mm max. and One 240mm max.
-- Power consumption: 10W/ slot max.
ŒŒ NISE 3640P2E: One PCI expansion and One PCIex4 expansion
-- Add-on card length: 169mm max. for PCIex4 and 240mm max. for
PCI expansion
-- Power consumption: 10W/ slot max.
ŒŒ 2 x Mini-PCIe sockets (Top side Mini-PCIe Socket support optional
Wi-Fi or 3.5G module)
OS Support Lists
Power Requirements
ŒŒ NISE 3640E (P/N: 10J00364000X0)
ŒŒ ATX Power mode
ŒŒ Support +24VDC Input
ŒŒ Optional power adapter
Dimensions
ŒŒ 215mm (W) x 272mm (D) x 114mm (H) without wall mount bracket
(8.5" x 10.7" x 4.5")
Construction
ŒŒ Aluminum Chassis with fanless design
Environment
ŒŒ Operating temperature:
Ambient with air flow: -20°C to 60°C with industrial grade device
(According to IEC60068-2-1, IEC60068-2-2, IEC60068-2-14)
ŒŒ Storage temperature: -20°C to 80°C
ŒŒ Relative humidity: 95% at 40°C
ŒŒ Shock protection:
-- HDD: 20G, half sine, 11ms, IEC60068-2-27
-- CFast: 50G, half sine, 11ms, IEC60068-2-27
ŒŒ Vibration protection w/ HDD Condition
-- Random: 0.5Grms @ 5~500 Hz according to IEC60068-2-64
-- Sinusoidal: 0.5Grms @ 5~500 Hz according to IEC60068-2-6
ŒŒ Windows XP 32bits and 64bits
ŒŒ Windows 7 32bits and 64bits
ŒŒ Windows 8.1 32 bits and 64 bits
Ordering Information
Barebone
3rd Generation Intel® Core™ i7 Fanless System with One PCIex4
Expansion
ŒŒ NISE 3640E2 (P/N: 10J00364001X0)
3rd Generation Intel® Core™ i7 Fanless System with Two PCIex4
Expansion
ŒŒ NISE 3640P2 (P/N: 10J00364002X0)
3rd Generation Intel® Core™ i7 Fanless System with Two PCI Expansion
ŒŒ NISE 3640P2E (P/N: 10J00364003X0)
3rd Generation Intel® Core™ i7 Fanless System with One PCI Expansion
and One PCIex4 Expansion
ŒŒ 24V, 120W AC/DC power adapter w/ o power cord
(P/N: 7400120001X00)
Certifications
ŒŒ CE approval
ŒŒ FCC Class A
Factory Automation Solution Product Selection Guide
39
APPC 1230T/1231T
12.1" TFT SVGA 4:3 Flush Panel PC with Intel® Atom™ D2550,
1.86GHz, Touch Screen, 2GB DDR3, 4 x USB, 4 x COM and VGA
APPC 1231T
Fieldbus
Module Holder
APPC 1232T
Main Features
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
4:3 12.1" SVGA Fanless LED Panel Computer
Intel® Atom™ D2550, Dual Core, Low Consumption CPU
Flush Panel by 5-wire Touch Screen
Dual GbE/2nd display-VGA/Line-in/Line-out/MIC-in/PS2 KB/MS
USB x 4/2 x Mini-PCIe sockets/1 x CFast/2 x RS232/422/485
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Optional 3.5G/Wi-Fi Module/2.5" HDD/2 x COMs/GPIO/DIO
DDR3 2GB/2.5" HDD Bracket
IP65 Compliant Front Panel
Mounting Support: Panel/Wall/Stand/VESA 100mm x 100mm
Wide Range Power Input 12V~30VDC
Product Overview
The 12.1" fanless panel PC APPC 1230T/1231T incorporating an industrial motherboard is intended for versatile industrial applications. APPC 1230T/1231T
has a touch screen LED backlight LCD panel with 800 x 600 (SVGA) resolution and 450-nit brightness. The front panel which adopts flush design and complies
with IP65 standard makes it the perfect fit in industrial applications.
This APPC series supports WWAN/WLAN expansion and others via dual Gigabit Ethernet connectors, two Mini-PCIe slots and one SIM card holder. With
support for wide power input of 12V~30V, this APPC series can gain a strong foothold in industrial field and machine devices. In addition, this APPC series
can hook 2nd display via a VGA port for dual independent display. APPC 1231T has two isolated RS232/422/485 ports, two RS232 ports supporting 5V
and 12V power feed, four isolated channels of DI and DO, and two channels of GPI and GPO.
Specifications
Panel
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
LED Size: 12.1", 4:3
Resolution: SVGA 800 x 600
Luminance: 450cd/m2
Contrast ratio: 700
LCD color: 16.2M
Viewing Angle: 65(U), 75(D), 80(L), 80(R)
Backlight: LED
Touch Screen
ŒŒ 5-wire resistive (flush panel type)
ŒŒ Light transmission: 80%
ŒŒ Interface: USB
System
ŒŒ CPU: On-board Intel® Atom™ Dual Core processor D2550, 1.86GHz,
1M L2 Cache
ŒŒ BIOS: AMI BIOS
ŒŒ System chipset: Intel® NM10 Express chipset
ŒŒ System memory: 2 x 204-pin DDR3 SO-DIMM socket, 2GB DDR3
(Default),Support up to 4GB DDR3-800/1066, Non-ECC and Unbuffered
ŒŒ Storage Device:
-- 1 x external locked CFast socket
-- 1 x hard drive bay: optional 1 x 2.5" SATA HDD or 1 x SATA DOM
40
Factory Automation Solution Product Selection Guide
ŒŒ Watchdog timer: Watchdog timeout can be programmable by
software from 1 second to 255 seconds and from 1 minute to 255
minutes (Tolerance 15% under room temperature 25℃)
ŒŒ H/W status monitor: Monitoring system temperature, and voltage
ŒŒ Expansion: 2 x Mini-PCIe sockets (support optional Wi-Fi or 3.5G module)
ŒŒ Panel backlight control button: Increase brightness/decrease
brightness/Backlight On/Off (For APPC 1231T only)
Rear I/O
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Ethernet: 2 x RJ45
2nd display VGA port: 1 x DB15
Audio port: 1 x Line-out; 1 x Line-in; 1 x MIC-in
USB: 4 x USB2.0
PS2 keyboard/mouse
Power switch/Reset button
COM #1: RS232/422/485 w/ RI or 5V selection
COM #2: RS232/422/485 w/ RI or 12V selection
For APPC1231T only
ŒŒ DIO w/ 2.5kv isolated:
ŒŒ 4 x Digital Input (Source type)
-- Input Voltage (Dry Contact): Logic 0: Close to GND
-- Logic 1: Open
-- Input Voltage: Logic 0: 3V max
-- Logic 1: +5V ~ +30V
ŒŒ 4 x Digital Output (Sink type)
Dimension Drawing
5
230
304.5
67,22
100,25
301,73
67,23
100,25
8,80
56,90
34,86
CUT OUT SIZE T=5MM(MAX)
65,89
8,50
8,80
108.68
100
100
84.37
243
173.90
227.76
83.13
50.95
15
14,78
7,62
317
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
-- Output Voltage: 3.6V ~ 5V
-- Sink current: 200 mA max. per channel
GPIO: 2 x digital in/2 x digital out
COM #1: RS232/422/485 w/ 2.5kv isolated
COM #2: RS232/422/485 w/ 2.5kv isolated
COM #3: RS232 w/ RI or 5V selection
COM #4: RS232 w/ RI or 12V selection
Audio
ŒŒ AC97 codec: Realtek ALC886-GR
ŒŒ Audio interface: Line-out/Line-in/MIC-in Audio Jack
Ethernet
ŒŒ LAN chip: dual Intel® 82574L Gigabit LAN
ŒŒ Ethernet interface: 10/100/1000 Based-Tx Ethernet compatible
Mechanical & Environment
ŒŒ Color: pantone black\RAL 15 00 front bezel w/ Pantone 400C\RAL
090 80 10 metal style membrane
ŒŒ IP protection: IP65 front
ŒŒ Mounting: panel/wall/stand/VESA 100mm x 100mm
ŒŒ Power input: 12V~ 30VDC
ŒŒ Power adapter: Optional AC to DC power adaptor (+12V, 60W)
ŒŒ Vibration:
-- IEC 68 2-64 (w/ HDD)
-- 1Grms @ sine, 5~500Hz, 1hr/axis (HDD Operating)
-- 2Grms @ sine, 5~500Hz, 1hr/axis (CFast Operating)
-- 2.2Grms @ random condition, 5~500Hz, 0.5hr/axis (Non-operating)
ŒŒ Shock:
-- IEC 68 2-27
-- HDD: 20G@wall mount, half sine, 11ms
ŒŒ Operating temperature: -5°C to 60°C
ŒŒ Storage temperature: -20°C to 75°C
ŒŒ Operating humidity: 10%~90% relative humidity, non-condensing
Limits to be at 90% RH at max 50°C
ŒŒ Dimension: 317 x 243 x 65.89mm
ŒŒ Weight: 3.9 Kg
Certifications
ŒŒ CE approval
ŒŒ FCC Class A
Ordering Information
Barebone
ŒŒ APPC 1230T-2G (P/N: 10IA1230T02X0)
12.1" SVGA LED Backlight Touch Panel PC, Intel® Atom™ D2550
1.86 GHz, touch screen, 2GB DDR3, 2 x RS232/422/485
ŒŒ APPC 1231T-2G (P/N: 10IA1231T02X0)
12.1" SVGA LED Backlight Touch Panel PC, Intel® Atom™ D2550
1.86 GHz, touch screen, 2GB DDR3, 2 x RS232/422/485 and 4 x 4
DI/O with isolated protection, 2 x RS232, 2 x 2 GPI/O, Brightness
adjustment buttons
ŒŒ APPC 1232T-FBI (P/N: A0IA1232T00X0)
12.1" SVGA LED Backlight Touch Panel PC, Intel® Atom™ D2550 1.86 GHz,
touch screen, 4GB DDR3, 2 xRS232/422/485 and 4 x 4 DI/O with isolated
protection, Brightness adjustment buttons, fieldbus module installed
ŒŒ APPC 1237T-FBI (P/N: A0IA1237T00X0)
12.1" XGA LED Backlight Touch Panel PC, Intel® Atom™ D2550 1.86 GHz,
touch screen, 4GB DDR3, 2 x RS232/422/485 and 4 x 4 DI/O with isolated
protection, Brightness adjustment buttons, fieldbus module installed
ŒŒ ProfiNET Master Interface: FBI90E-PNM for APPC
(Protocol Option P/N: 88IA1932T00X0)
ŒŒ Ethernet/IP Interface: FBI90E-EP for APPC (Protocol
Option P/N: 88IA1932T01X0)
ŒŒ EtherCAT Master Interface: FBI90E-ECM for APPC
(Protocol Option P/N: 88IA1932T02X0)
ŒŒ Profibus Master Interface: FBI90E-PBM for APPC
(Protocol Option P/N: 88IA1932T03X0)
ŒŒ DeviceNet Master Interface: FBI90E-DNM for APPC
(Protocol Option P/N: 88IA1932T04X0)
Options
ŒŒ 12V, 60W AC/DC power adapter w/ o power cord
(P/N: 7400060017X00)
Factory Automation Solution Product Selection Guide
41
APPC 1530T/1531T
15" TFT XGA 4:3 Flush Panel PC with Intel® Atom™ D2550,
1.86GHz, Touch Screen, 2GB DDR3, 4 x USB, 4 x COM and VGA
APPC 1531T
Fieldbus
Module Holder
APPC 1532T
Main Features
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
4:3 15" XGA Fanless LED Panel Computer
Intel® Atom™ D2550, Dual Core, Low Consumption CPU
Flush Panel by 5-wire Touch Screen
Dual GbE/2nd display-VGA/Line-in/Line-out/MIC-in/PS2 KB/MS
USB x 4/2 x Mini-PCIe sockets/1 x CFast/2 x RS232/422/485
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Optional 3.5G/Wi-Fi Module/2.5" HDD/2 x COMs/GPIO/DIO
DDR3 2GB/2.5" HDD Bracket
IP65 Compliant Front Panel
Mounting Support: Panel/Wall/Stand/VESA 100mm x 100mm
Wide Range Power Input 12V~30VDC
Product Overview
The 15" fanless panel PC APPC 1530T/1531T incorporating an industrial motherboard is intended for versatile industrial applications. The panel PC has a
touch screen LED backlight LCD panel with 1024 x 768 (XGA) resolution and 400-nit brightness. The front panel which adopts flush design and complies
with IP65 standard makes it the perfect fit in industrial applications.
The APPC 1530T/1531T supports WWAN/WLAN expansion and others via dual Gigabit Ethernet connectors, two Mini-PCIe slots and one SIM card holder.
With support for wide power input of 12V~30V, APPC 1530T/1531T can gain a strong foothold in industrial field and machine devices. In addition,
APPC 1530T/1531T can hook 2nd display via a VGA port for dual independent display. APPC 1531T has two isolated RS232/422/485 ports, two RS232
ports supporting 5V and 12V power feed, four isolated channels of DI and DO, and two channels of GPI and GPO.
Specifications
Panel
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
LED Size: 15", 4:3
Resolution: XGA 1024 x 768
Luminance: 400cd/m2
Contrast ratio: 700
LCD color: 16.2M
Viewing Angle: 60 (U), 80(D), 80(L), 80(R)
Backlight: LED
Touch Screen
ŒŒ 5-wire resistive (flush panel type)
ŒŒ Light transmission: 80%
ŒŒ Interface: USB
System
ŒŒ CPU: On-board Intel® Atom™ Dual Core processor D2550, 1.86GHz,
1M L2 Cache
ŒŒ BIOS: AMI BIOS
ŒŒ System chipset: Intel® NM10 Express chipset
ŒŒ System memory: 2 x 204-pin DDR3 SO-DIMM socket, 2GB DDR3
(Default),Support up to 4GB DDR3-800/1066, Non-ECC and
Un-buffered
ŒŒ Storage Device:
-- 1 x external locked CFast socket
-- 1 x hard drive bay: optional 1 x 2.5" SATA HDD or 1 x SATA DOM
ŒŒ Watchdog timer: Watchdog timeout can be programmable by
42
Factory Automation Solution Product Selection Guide
software from 1 second to 255 seconds and from 1 minute to 255
minutes (Tolerance 15% under room temperature 25°C)
ŒŒ H/W status monitor: Monitoring system temperature, and voltage
ŒŒ Expansion: 2 x Mini-PCIe sockets
(support optional Wi-Fi or 3.5G module)
ŒŒ Panel backlight control button: Increase brightness/decrease
brightness/Backlight On/Off (For APPC1531T only)
Rear I/O
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Ethernet: 2 x RJ45
2nd display VGA port: 1 x DB15
Audio port: 1 x Line-out; 1 x Line-in; 1 x MIC-in
USB: 4 x USB2.0
PS2 keyboard/mouse
Power switch
Reset button
COM #1: RS232/422/485 w/ RI or 5V selection
COM #2: RS232/422/485 w/ RI or 12V selection
For APPC 1531T only
ŒŒ D
IO w/ 2.5kv isolated:
-- 4 x Digital Input (Source type)
-- Input Voltage (Dry Contact): Logic 0: Close to GND
-- Logic 1: Open
-- Input Voltage: Logic 0: 3V max
-- Logic 1: +5V ~ +30V
-- 4 x Digital Output (Sink type)
Dimension Drawing
5
297
371
89.26
7.41
160
67.22
366.32
67.23
160
384.37
CUT OUT SIZE T=5MM(MAX)
142.27
70.35
292.20
60
ŒŒ AC97 codec: Realtek ALC886-GR
ŒŒ Audio interface: Line-out/Line-in/MIC-in Audio Jack
Ethernet
Ordering Information
Barebone
ŒŒ APPC 1530T-2G (P/N: 10IA1530T02X0)
touch screen, 2GB DDR3,2 x RS232/422/485
ŒŒ APPC 1531T-2G (P/N: 10IA1531T02X0)
15" XGA LED Backlight Touch Panel PC, Intel® Atom™ D2550 1.86
ŒŒ LAN chip: dual Intel 82574L Gigabit LAN
ŒŒ Ethernet interface: 10/100/1000 Based-Tx Ethernet compatible
®
Mechanical & Environment
ŒŒ Color: pantone black\RAL 15 00 front bezel w/ Pantone 400C\RAL
090 80 10 metal style membrane
ŒŒ IP protection: IP65 front
ŒŒ Mounting: panel/wall/stand/VESA 100mm x 100mm
ŒŒ Power input: 12V~30VDC
ŒŒ Power adapter: Optional AC to DC power adaptor (+12V, 60W)
ŒŒ Vibration:
-- IEC 68 2-64 (w/ HDD)
-- 1Grms @ sine, 5~500Hz, 1hr/axis (HDD Operating)
-- 2Grms @ sine, 5~500Hz, 1hr/axis (CFast Operating)
-- 2.2Grms @ random condition, 5~500Hz, 0.5hr/axis (Non-operating)
ŒŒ Shock:
-- IEC 68 2-27
-- HDD: 20G@wall mount, half sine, 11ms
ŒŒ Operating temperature: -5°C to 60°C
ŒŒ Storage temperature: -20°C to 75°C
ŒŒ Operating humidity: 10%~90% relative humidity, non-condensing
Limits to be at 90% RH at max 50°C
ŒŒ Dimension: 384.37 x 309.95 x 63.2mm
ŒŒ Weight: 5 Kg
ŒŒ CE approval
ŒŒ FCC Class A
15" XGA LED Backlight Touch Panel PC, Intel® Atom™ D2550 1.86 GHz,
Audio
Certifications
70.35
309.95
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
-- Output Voltage: 3.6V~5V
-- Sink current: 200 mA max. per channel
GPIO: 2 x digital in/2 x digital out
COM #1: RS232/422/485 w/ 2.5kv isolated
COM #2: RS232/422/485 w/ 2.5kv isolated
COM #3: RS232 w/ RI or 5V selection
COM #4: RS232 w/ RI or 12V selection
100
77.70
56.09
10.40
100
8.80
63.20
7
19.20
GHz, touch screen, 2GB DDR3, 2 x RS232/422/485 and 4 x 4 DI/O with
isolated protection, 2 x RS232, 2 x 2 GPI/O, Brightness adjustment
buttons
ŒŒ APPC 1532T-FBI (P/N: A0IA1532T00X0)
15" XGA LED Backlight Touch Panel PC, Intel® Atom™ D2550 1.86 GHz,
touch screen, 4GB DDR3, 2 x RS232/422/485 and 4 x 4 DI/O with isolated
protection, Brightness adjustment buttons, fieldbus module installed
ŒŒ ProfiNET Master Interface: FBI90E-PNM for APPC
(Protocol Option P/N: 88IA1932T00X0)
ŒŒ Ethernet/IP Interface: FBI90E-EP for APPC (Protocol
Option P/N: 88IA1932T01X0)
ŒŒ EtherCAT Master Interface: FBI90E-ECM for APPC
(Protocol Option P/N: 88IA1932T02X0)
ŒŒ Profibus Master Interface: FBI90E-PBM for APPC
(Protocol Option P/N: 88IA1932T03X0)
ŒŒ DeviceNet Master Interface: FBI90E-DNM for APPC
(Protocol Option P/N: 88IA1932T04X0)
Options
ŒŒ 12V, 60W AC/DC power adapter w/ o power cord
(P/N: 7400060017X00)
Factory Automation Solution Product Selection Guide
43
APPC 1730T/1731T
17" TFT SXGA 4:3 Flush Panel PC with Intel® Atom™ D2550,
1.86GHz, Touch Screen, 2GB DDR3, 4 x USB, 4 x COM and VGA
APPC 1731T
Fieldbus
Module Holder
APPC 1732T
Main Features
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
4:3 17" SXGA Fanless Panel Computer
Intel® Atom™ D2550, Dual Core, Low Consumption CPU
Flush Panel by 5-wire Touch Screen
Dual GbE/2nd display-VGA/Line-in/Line-out/MIC-in/PS2 KB/MS
USB x 4/2 x Mini-PCIe sockets/1 x CFast/2 x RS232/422/485
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Optional 3.5G/Wi-Fi Module/2.5" HDD/2 x COMs/GPIO/DIO
DDR3 2GB/2.5" HDD Bracket
IP65 Compliant Front Panel
Mounting Support: Panel/Wall/Stand/VESA 100mm x 100mm
Wide Range Power Input 12V~30VDC
Product Overview
The 17" fanless panel PC APPC 1730T/1731T incorporating an industrial motherboard is intended for versatile industrial applications. The panel PC has
a touch screen LCD panel with 1280 x 1024 (SXGA) resolution and 380-nit brightness. The front panel which adopts flush design and complies with IP65
standard makes it the perfect fit in industrial applications.
The APPC 1730T/1731T supports WWAN/WLAN expansion and others via dual Gigabit Ethernet connectors, two Mini-PCIe slots and one SIM card holder.
With support for wide power input of 12V~30V, APPC 1730T/1731T can gain a strong foothold in industrial field and machine devices. In addition,
APPC 1730T/1731T can hook 2nd display via a VGA port for dual independent display. APPC 1731T has two isolated RS232/422/485 ports, two RS232
ports supporting 5V and 12V power feed, four isolated channels of DI and DO, and two channels of GPI and GPO.
Specifications
Panel
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
LED Size: 17", 4:3
Resolution: SXGA 1280 x 1024
Luminance: 380cd/m2
Contrast ratio: 1000
LCD color: 16.7M
Viewing Angle: 80(U), 80(D), 85(L), 85(R)
Backlight: CCFL
Touch Screen
ŒŒ 5-wire resistive (flush panel type)
ŒŒ Light transmission: 81%
ŒŒ Interface: USB
System
ŒŒ CPU: On-board Intel® Atom™ Dual Core processor D2550, 1.86GHz,
1M L2 Cache
ŒŒ BIOS: AMI BIOS
ŒŒ System chipset: Intel® NM10 Express chipset
ŒŒ System memory: 2 x 204-pin DDR3 SO-DIMM socket, 2GB DDR3
(Default)
ŒŒ Support up to 4GB DDR3-800/1066, Non-ECC and Un-buffered
ŒŒ Storage Device:
- 1 x external locked CFast socket
- 1 x hard drive bay: optional 1 x 2.5" SATA HDD or 1 x SATA DOM
44
Factory Automation Solution Product Selection Guide
ŒŒ W
atchdog timer: Watchdog timeout can be programmable by
software from 1 second to 255 seconds and from 1 minute to 255
minutes (Tolerance 15% under room temperature 25°C)
ŒŒ H/W status monitor: Monitoring system temperature, and voltage
ŒŒ Expansion: 2 x Mini-PCIe sockets (support optional Wi-Fi or 3.5G
module)
ŒŒ Panel backlight control button: Increase brightness/decrease
brightness/Backlight On/Off (For APPC1731T only)
Rear I/O
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Ethernet: 2 x RJ45
2nd display VGA port: 1 x DB15
Audio port: 1 x Line-out; 1 x Line-in; 1 x MIC-in
USB: 4 x USB2.0
PS2 keyboard/mouse
Power switch
Reset button
COM #1: RS232/422/485 w/ RI or 5V selection
COM #2: RS232/422/485 w/ RI or 12V selection
For APPC1731T only
ŒŒ D
IO w/ 2.5kv isolated:
-- 4 x Digital Input (Source type)
-- Input Voltage (Dry Contact): Logic 0: Close to GND
-- Logic 1: Open
-- Input Voltage: Logic 0: 3V max
Dimension Drawing
6.00
329.00
399.00
67.22
392.40
134.45
56.40
11.80
410.42
271.34
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
6.00
340.40
338.92
CUT OUT SIZE T=6(MAX)
75.79
38.90
-- Logic 1: +5V ~ +30V
-- 4 x Digital Output (Sink type)
-- Output Voltage: 3.6V~5V
-- Sink current: 200 mA max. per channel
GPIO: 2 x digital in/2 x digital out
COM #1: RS232/422/485 w/ 2.5kv isolated
COM #2: RS232/422/485 w/ 2.5kv isolated
COM #3: RS232 w/ RI or 5V selection
COM #4: RS232 w/ RI or 12V selection
270.00
100.00
100.00
173.90
181.90
322.38
Certifications
ŒŒ CE approval
ŒŒ FCC Class A
Ordering Information
Barebone
ŒŒ APPC 1730T-2G (P/N: 10IA1730T03X0)
17" SXGA CCFL Backlight Touch Panel PC, Intel® Atom™ D2550
Audio
ŒŒ AC97 codec: Realtek ALC886-GR
ŒŒ Audio interface: Line-out/Line-in/MIC-in Audio Jack
1.86 GHz, touch screen, 2GB DDR3, 2 x RS232/422/485
ŒŒ APPC 1731T-2G (P/N: 10IA1731T02X0)
17" SXGA CCFL Backlight Touch Panel PC, Intel® Atom™ D2550 1.86
Ethernet
ŒŒ LAN chip: dual Intel 82574L Gigabit LAN
ŒŒ Ethernet interface: 10/100/1000 Based-Tx Ethernet compatible
®
Mechanical & Environment
ŒŒ Color: pantone black\RAL 15 00 front bezel w/ Pantone 400C\RAL
090 80 10 metal style membrane
ŒŒ IP protection: IP65 front
ŒŒ Mounting: panel/wall/stand/VESA 100mm x 100mm
ŒŒ Power input: 12V~30VDC
ŒŒ Power adapter: Optional AC to DC power adaptor (+12V, 60W)
ŒŒ Vibration:
-- IEC 68 2-64 (w/ HDD)
-- 1Grms @ sine, 5~500Hz, 1hr/axis (HDD Operating)
-- 2Grms @ sine, 5~500Hz, 1hr/axis (CFast Operating)
-- 2.2Grms @ random condition, 5~500Hz, 0.5hr/axis (Non-operating)
ŒŒ Shock:
-- IEC 68 2-27
-- HDD: 20G@wall mount, half sine, 11ms
ŒŒ Operating temperature: -5°C to 50°C
ŒŒ Storage temperature: -20°C to 75°C
ŒŒ Operating humidity: 10%~90% relative humidity, non-condensing
Limits to be at 90% RH at max 50°C
ŒŒ Dimension: 410.4 x 340.4 x 75.79mm
ŒŒ Weight: 6.6 Kg
GHz, touch screen, 2GB DDR3, 2 x RS232/422/485 and 4 x 4 DI/O with
isolated protection, 2 x RS232, 2 x 2 GPI/O, Brightness adjustment
buttons
ŒŒ APPC 1732T-FBI (P/N: A0IA1732T00X0)
17" SXGA CCFL Backlight Touch Panel PC, Intel® Atom™ D2550 1.86 GHz,
touch screen, 4GB DDR3, 2 x RS232/422/485 and 4 x 4 DI/O with isolated
protection, Brightness adjustment buttons, fieldbus module installed
ŒŒ ProfiNET Master Interface: FBI90E-PNM for APPC
(Protocol Option P/N: 88IA1932T00X0)
ŒŒ Ethernet/IP Interface: FBI90E-EP for APPC (Protocol
Option P/N: 88IA1932T01X0)
ŒŒ EtherCAT Master Interface: FBI90E-ECM for APPC
(Protocol Option P/N: 88IA1932T02X0)
ŒŒ Profibus Master Interface: FBI90E-PBM for APPC
(Protocol Option P/N: 88IA1932T03X0)
ŒŒ DeviceNet Master Interface: FBI90E-DNM for APPC
(Protocol Option P/N: 88IA1932T04X0)
Options
ŒŒ 12V, 60W AC/DC power adapter w/ o power cord
(P/N: 7400060017X00)
Factory Automation Solution Product Selection Guide
45
APPC 1930T/1931T
19" TFT SXGA 4:3 Flush Panel PC with Intel® Atom™ D2550,
1.86GHz, Touch Screen, 2GB DDR3, 4 x USB, 4 x COM and VGA
APPC 1931T
Fieldbus
Module Holder
APPC 1932T
Main Features
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
4:3 19" SXGA Fanless LED Panel Computer
Intel® Atom™ D2550, Dual Core, Low Consumption CPU
Flush Panel by 5-wire Touch Screen
Dual GbE/2nd display-VGA/Line-in/Line-out/MIC-in/PS2 KB/MS
USB x 4/2 x Mini-PCIe sockets/1 x CFast/2 x RS232/422/485
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Optional 3.5G/Wi-Fi Module/2.5" HDD/2 x COMs/GPIO/DIO
DDR3 2GB/2.5" HDD Bracket
IP65 Compliant Front Panel
Mounting Support: Panel/Wall/Stand/VESA 100mm x 100mm
Wide Range Power Input 12V~ 30VDC
Product Overview
The 19" fanless panel PC APPC 1930T/1931T incorporating an industrial motherboard is intended for versatile industrial applications. The panel PC has
a touch screen LED backlight LCD panel with 1280 x 1024 (SXGA) resolution. The front panel which adopts flush design and complies with IP65 standard
makes it the perfect fit in industrial applications.
The APPC 1930T/1931T supports WWAN/WLAN expansion and others via dual Gigabit Ethernet connectors, two Mini-PCIe slots and one SIM card holder.
With support for wide power input of 12V~30V, APPC 1930T/1931T can gain a strong foothold in industrial field and machine devices. In addition,
APPC 1930T/1931T can hook 2nd display via a VGA port for dual independent display. APPC 1931T has two isolated RS232/422/485 ports, two RS232
ports supporting 5V and 12V power feed, four isolated channels of DI and DO, and two channels of GPI and GPO.
Specifications
Panel
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
LED Size: 19", 4:3
Resolution: SXGA 1280 x 1024
Luminance: 350cd/m2
Contrast ratio: 1000
LCD color: 16.7M
Viewing Angle: 80(U), 80(D), 85(L), 85(R)
Backlight: LED
Touch Screen
ŒŒ 5-wire resistive (flush panel type)
ŒŒ Light transmission: 81%
ŒŒ Interface: USB
System
ŒŒ CPU: On-board Intel® Atom™ Dual Core processor D2550, 1.86GHz,
1M L2 Cache
ŒŒ BIOS: AMI BIOS
ŒŒ System chipset: Intel® NM10 Express chipset
ŒŒ System memory: 2 x 204-pin DDR3 SO-DIMM socket, 2GB DDR3
(Default),Support up to 4GB DDR3-800/1066, Non-ECC and
Un-buffered
ŒŒ Storage Device:
-- 1 x external locked CFast socket
-- 1 x hard drive bay: optional 1 x 2.5" SATA HDD or 1 x SATA DOM
46
Factory Automation Solution Product Selection Guide
ŒŒ Watchdog timer: Watchdog timeout can be programmable by
software from 1 second to 255 seconds and from 1 minute to 255
minutes (Tolerance 15% under room temperature 25°C)
ŒŒ H/W status monitor: Monitoring system temperature, and voltage
ŒŒ Expansion: 2 x Mini-PCIe sockets (support optional Wi-Fi or 3.5G module)
ŒŒ Panel backlight control button: Increase brightness/decrease
brightness/Backlight On/Off (For APPC 1931T only)
Rear I/O
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Ethernet: 2 x RJ45
2nd display VGA port: 1 x DB15
Audio port: 1 x Line-out; 1 x Line-in; 1 x MIC-in
USB: 4 x USB2.0
PS2 keyboard/mouse
Power switch
Reset button
COM #1: RS232/422/485 w/ RI or 5V selection
COM #2: RS232/422/485 w/ RI or 12V selection
For APPC1931T only
ŒŒ DIO w/ 2.5kv isolated:
-- 4 x Digital Input (Source type)
-- Input Voltage (Dry Contact): Logic 0: Close to GND
-- Logic 1: Open
-- Input Voltage: Logic 0: 3V max
-- Logic 1: +5V~+30V
Dimension Drawing
3
366
436
431.34
121.32
104.50
67.22
270.36
67.23
97.35
104.50
6.90
41.49
457.64
8.10
CUT OUT SIZE T=3MM(MAX)
61.25
24.25
179.30
16.15
100
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
-- 4 x Digital Output (Sink type)
-- Output Voltage: 3.6V~5V
-- Sink current: 200 mA max. per channel
GPIO: 2 x digital in/2 x digital out
COM #1: RS232/422/485 w/ 2.5kv isolated
COM #2: RS232/422/485 w/ 2.5kv isolated
COM #3: RS232 w/ RI or 5V selection
COM #4: RS232 w/ RI or 12V selection
Audio
ŒŒ AC97 codec: Realtek ALC886-GR
ŒŒ Audio interface: Line-out/Line-in/MIC-in Audio Jack
114.89
100
111.52
174.32
361.34
111.52
379.24
52.90
76.38
10.15
ŒŒ CE approval
ŒŒ FCC Class A
Ordering Information
Barebone
ŒŒ APPC 1930T-2G (P/N: 10IA1930T04X0)
19" SXGA LED Backlight Touch Panel PC, Intel® Atom™ D2550 1.86
GHz, touch screen, 2GB DDR3, 2 x RS232/422/485
ŒŒ APPC 1931T-2G (P/N: 10IA1931T02X0)
Ethernet
19" SXGA LED Backlight Touch Panel PC, Intel® Atom™ D2550 1.86
ŒŒ LAN chip: dual Intel® 82574L Gigabit LAN
ŒŒ Ethernet interface: 10/100/1000 Based-Tx Ethernet compatible
GHz, touch screen, 2GB DDR3, 2 x RS232/422/485 and 4 x 4 DI/O with
Mechanical & Environment
buttons
ŒŒ Color: pantone black\RAL 15 00 front bezel w/ Pantone 400C\RAL
090 80 10 metal style membrane
ŒŒ IP protection: IP65 front
ŒŒ Mounting: panel/wall/stand/VESA 100mm x 100mm
ŒŒ Power input: 12V~30VDC
ŒŒ Power adapter: Optional AC to DC power adaptor (+12V, 60W)
ŒŒ Vibration:
-- IEC 68 2-64 (w/ HDD)
-- 1Grms @ sine, 5~500Hz, 1hr/axis (HDD Operating)
-- 2Grms @ sine, 5~500Hz, 1hr/axis (CFast Operating)
-- 2.2Grms @ random condition, 5~500Hz, 0.5hr/axis (Non-operating)
ŒŒ Shock:
-- IEC 68 2-27
-- HDD: 20G@wall mount, half sine, 11ms
ŒŒ Operating temperature: -5°C to 50°C
ŒŒ Storage temperature: -20°C to 75°C
ŒŒ Operating humidity: 10%~90% relative humidity, non-condensing
Limits to be at 90% RH at max 50°C
ŒŒ Dimension: 457.64 x 379.24 x 61.25mm
ŒŒ Weight: 6.5 Kg
Certifications
isolated protection, 2 x RS232, 2 x 2 GPI/O, Brightness adjustment
ŒŒ APPC 1932T-FBI (P/N: A0IA1932T00X0)
19" SXGA LED Backlight Touch Panel PC, Intel® Atom™ D2550 1.86 GHz,
touch screen, 4GB DDR3, 2 x RS232/422/485 and 4 x 4 DI/O with isolated
protection, Brightness adjustment buttons, fieldbus module installed
ŒŒ ProfiNET Master Interface: FBI90E-PNM for APPC
(Protocol Option P/N: 88IA1932T00X0)
ŒŒ Ethernet/IP Interface: FBI90E-EP for APPC (Protocol
Option P/N: 88IA1932T01X0)
ŒŒ EtherCAT Master Interface: FBI90E-ECM for APPC
(Protocol Option P/N: 88IA1932T02X0)
ŒŒ Profibus Master Interface: FBI90E-PBM for APPC
(Protocol Option P/N: 88IA1932T03X0)
ŒŒ DeviceNet Master Interface: FBI90E-DNM for APPC
(Protocol Option P/N: 88IA1932T04X0)
Options
ŒŒ 12V, 60W AC/DC power adapter w/ o power cord
(P/N: 7400060017X00)
Factory Automation Solution Product Selection Guide
47
IPPC 1560T
15" TFT XGA 4:3 Heavy Industrial Panel PC with
3rd Generation Intel® Core™ i5, 2.7GHz
IPPC 1560TP2E-DC
IPPC 1560TP2E-AC
IPPC 1560TE
Main Features
ŒŒ
ŒŒ
ŒŒ
ŒŒ
4:3 15" XGA Fanless Panel Computer
Powerful 2nd/3rd generation Intel® Core™ processor
Two expansion slots for add-on PCI or/and PCIe cards
Optional 3.5G/Wi-Fi module/2.5" HDD/3 x Coms/GPIO/DIO/
Dimming Control Button
ŒŒ Front accessible USB2.0 for easy of field maintenance
ŒŒ Metal housing with robust aluminum front bezel for harsh environment
ŒŒ IP65 compliant front panel
ŒŒ Support fieldbus module, JMobile HMI, Citect SCADA and CODESYS
SoftLogic (optional)
ŒŒ Optional: wide range DC power input model/isolation protection DC
power input model
Product Overview
IPPC 1560T is a heavy industrial panel PC equipped with powerful 2nd/3rd generation Intel® Core™ processor, TFT LCD panel with LED backlight and userfriendly touch screen. It provides two expansion slots to support PROFINET, PROFIBUS, DeviceNet, EtherNet/IP and EtherCAT protocols. The NEMA4/IP66
rated heavy-duty aluminum front bezel and the vibration-resistant rugged chassis are specifically designed for outdoor and harsh industrial environments.
IPPC 1560T is ideal for use in oil and gas rig, wind farms, chemical factories, pharmaceutical factories, and hazardous working area.
Specifications
48
System
For All
ŒŒ CPU: Support 2nd/3rd gen. Intel® Core™ processor family, rPGA 988
-- Intel® Core™ i7-3520ME (2 x 2.9GHz, 4M cache, Max. TDP 35W)
-- Intel® Core™ i5-3610ME (2 x 2.7GHz, 3M cache, Max. TDP 35W)
(Default)
-- Intel® Core™ i3-3120ME (2 x 2.4GHz, 3M cache, Max. TDP 35W)
-- Intel® Celeron® B810 (2 x 1.6GHz, 2M cache, Max. TDP 35W)
-- Intel® Pentium® B950 (2 x 2.1GHz, 2M cache, Max. TDP 35W)
ŒŒ BIOS: AMI BIOS
ŒŒ System chipset: Intel® HM76 Express chipset
ŒŒ System memory: 1 x 204-pin DDR3 SO-DIMM socket, 4G DDR3 (Default),
support up to 8GB DDR3-1066/1333, non-ECC and un-buffered
ŒŒ Storage device:
-- 1 x external locked CFast socket
-- 2 x hard drive bay: optional 2 x 2.5" SATA HDD
-- 1 x SATA DOM (optional)
ŒŒ Watchdog timer: Watchdog timeout can be programmable by
software from 1 second to 255 seconds and from 1 minute to 255
minutes (Tolerance 15% under room temperature 25°C)
ŒŒ H/W status monitor: monitoring system temperature, and voltage
ŒŒ Expansion:
2 x Mini-PCIe sockets (support optional Wi-Fi or 3.5G module)
2 x expansion slots for add-on PCI or/and PCIe cards
-- 1 x PCI and 1 x PCIex4 slots (Default)
-- 2 x PCIex4 slots
-- 2 x PCI slots
ŒŒ Panel backlight control button: increase brightness/decrease
brightness/backlight on/off (for IPPC 1560TP2E-AC only)
ŒŒ 2 x PS2 keyboard/mouse
ŒŒ 2nd display VGA port: 1 x DB15
ŒŒ Ethernet: 2 x RJ45
Rear I/O
For IPPC 1560TE only
Factory Automation Solution Product Selection Guide
For IPPC 1560TP2E-DC only
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
USB: 5 x USB2.0 (1 in front)
Audio port: 1 x Line-out; 1 x Line-in; 1 x MIC-in
COM #1: RS232/422/485 w/ RI or 5V or 12V selection
COM #2: RS232/422/485 w/ RI or 5V or 12V selection
COM #3: RS232 w/ RI or 5V or 12V selection
ATX power switch
Reset button
For IPPC 1560TP2E-AC only
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
USB: 5 x USB2.0 (1 in front)
Audio port: 1 x Line-out; 1 x Line-in; 1 x MIC-in
COM #1: RS232/422/485 w/ 2.5kv isolated protection
COM #2: RS232/422/485 w/ 2.5kv isolated protection
COM #3: RS232 w/ RI or 5V or 12V selection
COM #4: RS232 w/ RI or 5V or 12V selection
COM #5: RS232
COM #6: RS232
DIO w/ 2.5kv isolated protection:
-- 4 x Digital Input (Source type)
-- 4 x Digital Output (Sink type)
GPIO: 4 x digital in/4 x digital out
LPT: Parallel port
AC Power switch
Reset button
Dimension Drawing
477.64 (OUTLINE)
29.3
450 (MOUNTING LINE)
95.72
29.3
13.82
A
450 (MOUNTING LINE)
100
450 (MOUNTING LINE)
295.00
A
100
Active Center
186.02
92.75
10
Active Area (304.1x228.1)
29.3
13.82
IPPC 1560TP2E-AC
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
USB: 4 x USB2.0 (Hidden)
COM #1: RS232/422/485 w/ 2.5kv isolated protection
COM #2: RS232/422/485 w/ 2.5kv isolated protection
COM #3: RS232 w/ RI or 5V or 12V selection
ATX Power switch
Reset button
CUT DUT SIZE T=3MM(MAX)
-- HDD: 20G @ wall mount, half sine, 11ms
ŒŒ Operating temperature: -10°C to 50°C
* Intel® Core™ i7/Intel® Celeron® B810/Intel® Pentium® B950: -10°C to 40°C
ŒŒ Storage temperature: -20°C to 75°C
ŒŒ Operating humidity: 10%~90% relative humidity, non-condensing
Limits to be at 90% RH at max 50°C
Audio
Certifications
ŒŒ AC97 codec: Realtek ALC886-GR
ŒŒ Audio interface: Line-out/Line-in/MIC-in audio Jack
ŒŒ CE (including EN61000-6-2/EN61000-6-4)
ŒŒ FCC Class A
Ethernet
ŒŒ LAN chip: dual Intel® 82574L Gigabit LAN
ŒŒ Ethernet interface: 10/100/1000 Based-Tx Ethernet compatible
Ordering Information
Fieldbus
System
ŒŒ IPPC 1560TP2E-DC/IPPC 1560TE: support up to two fieldbus module
(1 universal kit and 1 special kit)
ŒŒ IPPC 1560TP2E-AC: support one special fieldbus module kit
ŒŒ IPPC 1560TP2E-DC (P/N: 10II1560T00X0)
Mechanical & Environment
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
3.00
95.72
6
290 (MOUNTING LINE)
310 (OUTLINE)
232.1 (BEZEL OPENING)
38.95
477.64 (OUTLINE)
308.2 (BEZEL OPENING)
13.82
IPPC 1560TE
455.00
84.72
186.02
92.75
Active Area (304.1x228.1)
IPPC 1560TP2E-DC
100
10
6
100
308.2 (BEZEL OPENING)
84.72
290 (MOUNTING LINE)
310 (OUTLINE)
232.1 (BEZEL OPENING)
A
100
Active Center
186.02
92.75
10
100
38.95
95.72
6
290 (MOUNTING LINE)
310 (OUTLINE)
308.2 (BEZEL OPENING)
Active Area (304.1x228.1)
232.1 (BEZEL OPENING)
38.95
477.64 (OUTLINE)
84.72
Color: pantone 432C\ RAL 70 24 front bezel
Enclosure: aluminum front bezel with SPPC nickel plated housing
IP protection: IP65 front
Mounting: panel/wall/stand/VESA 100mm x 100mm
Power
For IPPC 1560TP2E-DC
-- Power Input: +9 to 30VDC
-- Power Adapter: optional AC to DC DIN rail power adapter (+24V, 120W)
For IPPC 1560TP2E-AC
-- Power input: 100-240V~, 1.5A, 50-60Hz; fuse: 250VAC/3A
-- Power connector: AC inlet (IEC60320 C14)
-- Power supply: 120W
For IPPC 1560TE
-- Power input: +24V DC+-20% with 1.5kv isolated protection
-- Fuse: 250V/10A
ŒŒ Vibration:
-- IEC 68 2-64 (w/ HDD)
-- 1Grms @ sine, 5~500Hz, 1hr/axis (HDD operating)
-- 2Grms @ sine, 5~500Hz, 1hr/axis (CFast operating)
-- 2.2Grms @ random condition, 5~500Hz, 0.5hr/axis (non-operating)
ŒŒ Shock:
-- IEC 68 2-27
15" XGA LED backlight fanless touch panel PC, Intel® Core™ i5-3610ME
2.7GHz, touch screen, 4GB DDR3, 3 x COMs, DC power input
ŒŒ IPPC 1560TP2E-AC (P/N: 10II1560T01X0)
15" XGA LED backlight fanless Touch panel PC, Intel® Core™ i5-3610ME
2.7GHz, touch screen, 4GB DDR3, 6 x COMs, 4 x 4GPIO, 4 x 4DIO with
isolated protection, AC power input
ŒŒ IPPC 1560TE (P/N: 10II1560T02X0)
15" XGA LED backlight fanless touch panel PC, Intel® Core™ i5-3610ME
2.7GHz, touch screen, 4GB DDR3, 3 x COMs, isolated protection DC Power
Optional
ŒŒ 24V/5A, 120W AC to DC DIN rail power adapter w/ o
power cord (P/N: 7440120001X00) (for IPPC 1560TP2EDC and IPPC 1560TE)
ŒŒ Riser card 2 x PCI slots (P/N: 20JK036P200X0)
ŒŒ Riser card 2 x PCIex4 slots (P/N: 20JK036E200X2)
ŒŒ Fieldbus module universal kit (for IPPC 1560TP2E-DC and
IPPC 1560TE)
88J50090E00X0
88J50090E01X0
88J50090E02X0
88J50090E03X0
88J50090E04X0
FBI 90E-PNM kit (w/ 25 cm cable)
FBI 90E-EP kit (w/ 25 cm cable)
FBI 90E-ECM kit (w/ 25 cm cable)
FBI 90E-PBM kit (w/ 25 cm cable)
FBI 90E-DNM kit (w/ 25 cm cable)
PROFINET master
EtherNet/IP master
EtherCAT master
PROFIBUS master
DeviceNET master
Factory Automation Solution Product Selection Guide
49
IPPC 1632P
15.6" TFT WXGA 16:9 Heavy Industrial Panel PC with Intel® Atom™ D2550, 1.86GHz,
Multi-Touch Screen, 4GB DDR3, 4 x USB, 2 x COM and VGA
Main Features
ŒŒ Intel® Atom™ D2550, dual core, low power consumption CPU
ŒŒ Metal housing with robust aluminum front zero bezel for harsh
environment
ŒŒ 10 points P-Cap multi-touch with zero bezel flush front design
ŒŒ Dual GbE/2nd display-VGA/Line-out
ŒŒ USB x 4/2 x Mini-PCIe sockets/1 x CFast/2 x RS232/422/485
ŒŒ DDR3 4GB/2.5" HDD bracket
ŒŒ IP66 compliant front panel
ŒŒ Support fieldbus module, JMobile HMI, Citect SCADA and
CODESYS SoftLogic (optional)
ŒŒ Mounting support: panel/wall/stand/VESA 100mm x 100mm
ŒŒ Wide range power input 12V~ 30V DC
Product Overview
The 15.6" fanless panel PC IPPC 1632P incorporating an industrial motherboard is intended for versatile industrial applications. The panel PC has a touch
screen LED backlight LCD panel with 1366 x 768 (HD; WXGA) resolution. The front panel which adopts flush design and complies with IP66 standard makes
it the perfect fit in industrial applications.
The IPPC 1632P supports WWAN/WLAN expansion and others via dual Gigabit Ethernet connectors, two Mini-PCIe slots and one SIM card holder. With
support for wide power input of 12V~30V, IPPC 1632P can gain a strong foothold in industrial field and machine devices. In addition, IPPC 1632P can
hook 2nd display via a VGA port for dual independent display. IPPC 1632P has two isolated RS232/422/485 ports, four isolated channels of DI and DO,
and optional fieldbus ports.
Specifications
Panel
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
LED size: 15.6", 16:9
Resolution: WXGA 1366 x 768
Luminance: 300cd/m2
Contrast ratio: 500
LCD color: 16.7M
Viewing angle: 80(U), 80(D), 85(L), 85(R)
Backlight: LED
Touch
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Ten points P-Cap (Projected Capacitive Touch)
Touch light transmission: 87%
Anti-scratch surface: 7H hardness
Touch interface: USB
Windows 8 compliance
System
ŒŒ CPU: On-board Intel® Atom™ dual core processor D2550, 1.86GHz, 1M
L2 Cache
ŒŒ BIOS: AMI BIOS
ŒŒ System chipset: Intel® NM10 Express chipset
ŒŒ System memory: 2 x 204-pin DDR3 SO-DIMM socket, 4GB DDR3
(Default),Support up to 4GB DDR3-800/1066, Non-ECC and Unbuffered
ŒŒ Storage Device:
-- 1 x external locked CFast socket
50
Factory Automation Solution Product Selection Guide
-- 1 x hard drive bay: optional 1 x 2.5" SATA HDD or 1 x SATA DOM
ŒŒ Watchdog timer: Watchdog timeout can be programmable by
software from 1 second to 255 seconds and from 1 minute to 255
minutes (tolerance 15% under room temperature 25°C)
ŒŒ H/W status monitor: monitoring system temperature, and voltage
ŒŒ Expansion: 2 x Mini-PCIe sockets (support optional Wi-Fi, 3.5G module
or fieldbus card)
ŒŒ Panel backlight control button: increase brightness/decrease
brightness/backlight on/off
ŒŒ Front Logo LED indicator to show operating status
Rear I/O
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Ethernet: 2 x RJ45
2nd display VGA port: 1 x DB15
Audio port: 1 x Line-out
USB: 4 x USB 2.0
Power switch
Reset button
DIO w/ 2.5kv isolated:
4 x Digital Input (source type)
-- Input voltage (dry contact): Logic 0: Close to GND
-- Logic 1: Open
-- Input voltage: Logic 0: 3V max
-- Logic 1: +5V ~ +30V
4 x Digital Output (sink type)
-- Output voltage: 3.6V ~ 5V
Dimension Drawing
401
296
270
63.75
417.4 (OUTLINE)
345.89 (V/A)
CUT OUT
6.2
396
291
174.3
195.17 (V/A)
312.4 (OUTLINE)
22.21
26.75
-- Sink current: 200 mA max. per channel
ŒŒ COM #1: RS232/422/485 w/ 2.5kv isolated
ŒŒ COM #2: RS232/422/485 w/ 2.5kv isolated
ŒŒ Fieldbus: (protocol interface optional)
ŒŒ Dimension: 417.8mm x 312.8mm x 63.75mm
ŒŒ Weight: 6.4Kg
Certifications
Model
Protocol
FBI90E-PNM
ProfiNET master
FBI90E-EP
Ethernet/IP master
FBI90E-ECM
EtherCAT master
FBI90E-PBM
Profibus master
DB9
DeviceNet master
5-pins Phoenix Contact
terminal
FBI90E-DNM
Connector
Dual RJ-45
Audio
ŒŒ AC97 codec: Realtek ALC886-GR
ŒŒ Audio interface: Line-out/Line-in/MIC-in audio Jack
Ethernet
ŒŒ LAN chip: dual Intel® 82574L Gigabit LAN
ŒŒ Ethernet interface: 10/100/1000 Based-Tx Ethernet compatible
Mechanical & Environment
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ CE (including EN61000-6-1/EN61000-6-2/EN61000-6-3/EN61000-6-4)
ŒŒ FCC Class B
ŒŒ cUL 60950
Color: Pantone 425C\RAL 70 24 front bezel
IP protection: IP66 front
Mounting: panel/wall/stand/VESA 100mm x 100mm
System with panel mounting kit w/ o panel mounting hole
Power input: 12V~30VDC
Power adapter: optional AC to DC power adaptor (+12V, 60W)
Vibration:
-- IEC 68 2-64 (w/ HDD)
-- 1Grms @ sine, 5~500Hz, 1hr/axis (HDD operating)
-- 2Grms @ sine, 5~500Hz, 1hr/axis (CFast operating)
-- 2.2Grms @ random condition, 5~500Hz, 0.5hr/axis (non-operating)
Shock:
-- IEC 68 2-27
-- HDD: 20G@wall mount, half sine, 11ms
Operating temperature: -10°C to 60°C
Storage temperature: -20°C to 75°C
Operating humidity: 10%~90% relative humidity, non-condensing
Ordering Information
Barebone
ŒŒ IPPC 1632P (P/N: 10II1632P00X0)
15.6" WXGA LED backlight touch panel PC, Intel® Atom™ D2550 1.86
GHz, touch screen, 4GB DDR3, 2 x RS232/422/485 and 4 x 4 DI/O with
isolated protection, brightness adjustment buttons, optional fieldbus
module
Options
ŒŒ 12V, 60W AC/DC power adapter w/ o power cord
(P/N: 7400060019X00)
ŒŒ PROFINET master interface module: FBI90E-PNM for
APPC (P/N: 88IA1932T00X0)
ŒŒ EtherNet/IP master interface module: FBI90E-EP for
APPC (P/N: 88IA1932T01X0)
ŒŒ EtherCAT master interface module: FBI90E-ECM for
APPC (P/N: 88IA1932T02X0)
ŒŒ PROFIBUS master interface module: FBI90E-PBM for
APPC (P/N: 88IA1932T03X0)
ŒŒ DeviceNet master interface module: FBI90E-DNM for
APPC (P/N: 88IA1932T04X0)
Factory Automation Solution Product Selection Guide
51
IPPC 1960T
19" TFT SXGA 4:3 Heavy Industrial Panel PC with
3rd Generation Intel® Core™ i5, 2.7GHz
IPPC 1960TP2E-DC
IPPC 1960TP2E-AC
Main Features
ŒŒ
ŒŒ
ŒŒ
ŒŒ
4:3 19" SXGA Fanless Panel Computer
Powerful 2nd/3rd generation Intel® Core™ processor
Two expansion slots for add-on PCI or/and PCIe cards
Optional 3.5G/Wi-Fi module/2.5" HDD/3 x Coms/GPIO/DIO/
Dimming Control Button
ŒŒ Front accessible USB2.0 for easy of field maintenance
ŒŒ Metal housing with robust aluminum front bezel for harsh
environment
ŒŒ IP66 compliant front panel
ŒŒ Support fieldbus module, JMobile HMI, Citect SCADA and
CODESYS SoftLogic (optional)
ŒŒ Wide range DC power input model
Product Overview
IPPC 1960T is a heavy industrial panel PC equipped with powerful 2nd/3rd generation Intel® Core™ processor, TFT LCD panel with LED backlight and userfriendly touch screen. It provides two expansion slots to support PROFINET, PROFIBUS, DeviceNet, EtherNet/IP and EtherCAT protocols. The NEMA4/IP66
rated heavy-duty aluminum front bezel and the vibration-resistant rugged chassis are specifically designed for outdoor and harsh industrial environments.
IPPC 1960T is ideal for use in oil and gas rig, wind farms, chemical factories, pharmaceutical factories, and hazardous working area.
Specifications
System
For All
ŒŒ CPU: Support 2nd/3rd gen. Intel® Core™ processor family, rPGA 988
-- Intel® Core™ i7-3520ME (2 x 2.9GHz, 4M cache, Max. TDP 35W)
-- Intel® Core™ i5-3610ME (2 x 2.7GHz, 3M cache, Max. TDP 35W)
(Default)
-- Intel® Core™ i3-3120ME (2 x 2.4GHz, 3M cache, Max. TDP 35W)
-- Intel® Celeron® B810 (2 x 1.6GHz, 2M cache, Max. TDP 35W)
-- Intel® Pentium® B950 (2 x 2.1GHz, 2M cache, Max. TDP 35W)
ŒŒ BIOS: AMI BIOS
ŒŒ System chipset: Intel® HM76 Express chipset
ŒŒ System memory: 1 x 204-pin DDR3 SO-DIMM socket, 4G DDR3 (Default),
support up to 8GB DDR3-1066/1333, non-ECC and un-buffered
ŒŒ Storage device:
-- 1 x external locked CFast socket
-- 2 x hard drive bay: optional 2 x 2.5" SATA HDD
-- 1 x SATA DOM (optional)
ŒŒ Watchdog timer: Watchdog timeout can be programmable by
software from 1 second to 255 seconds and from 1 minute to 255
minutes (tolerance 15% under room temperature 25°C)
ŒŒ H/W status monitor: monitoring system temperature, and voltage
ŒŒ Expansion:
2 x Mini-PCIe sockets (support optional Wi-Fi or 3.5G module)
2 x expansion slots for add-on PCI or/and PCIe cards
-- 1 x PCI and 1 x PCIex4 slots (default)
-- 2 x PCIex4 slots
-- 2 x PCI slots
ŒŒ Panel backlight control button: increase brightness/decrease
brightness/backlight on/off (for IPPC 1960TP2E-AC only)
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Rear I/O
52
Factory Automation Solution Product Selection Guide
2 x PS2 keyboard/mouse
2nd display VGA port: 1 x DB15
Ethernet: 2 x RJ45
USB: 5 x USB2.0 (1 in front)
Audio port: 1 x Line-out; 1 x Line-in; 1 x MIC-in
For IPPC 1960TP2E-DC only
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
COM #1: RS232/422/485 w/ RI or 5V or 12V selection
COM #2: RS232/422/485 w/ RI or 5V or 12V selection
COM #3: RS232 w/ RI or 5V or 12V selection
ATX power switch
Reset button
For IPPC 1960TP2E-AC only
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
COM #1: RS232/422/485 w/ 2.5kv isolated protection
COM #2: RS232/422/485 w/ 2.5kv isolated protection
COM #3: RS232 w/ RI or 5V or 12V selection
COM #4: RS232 w/ RI or 5V or 12V selection
COM #5: RS232
COM #6: RS232
DIO w/ 2.5kv isolated protection:
-- 4 x digital input (source type)
-- 4 x digital output (sink type)
GPIO: 4 x Digital In/4 x Digital Out
LPT: parallel port
AC power switch
Reset button
Audio
ŒŒ AC97 codec: Realtek ALC886-GR
ŒŒ Audio interface: Line-out/Line-in/MIC-in audio Jack
Dimension Drawing
450.00
398.42
455.00
6.00
269.60
380.00
269.60
380.00
399.24
477.64
399.24
477.64
6.00
33.36
33.36
99.38
99.38
450.00
398.42
6.00
IPPC 1960TP2E-DC
385.00
IPPC 1960TP2E-AC
CUT DUT SIZE T=6MM(MAX)
Ethernet
ŒŒ LAN chip: dual Intel® 82574L Gigabit LAN
ŒŒ Ethernet interface: 10/100/1000 Based-Tx Ethernet compatible
Fieldbus
ŒŒ IPPC 1960TP2E-DC: support up to two Fieldbus Module (1 universal
Kit and 1 special kit)
ŒŒ IPPC 1960TP2E-AC: support one special Fieldbus Module kit
Mechanical & Environment
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Color: pantone 432C\ RAL 70 24 front bezel
Enclosure: aluminum front bezel with SPPC nickel plated housing
IP protection: IP66 front
Mounting: panel/wall/stand/VESA 100mm x 100mm
Power
For IPPC 1960TP2E-DC
-- Power input: +9 to 30VDC
-- Power adapter: optional AC to DC DIN rail power adapter (+24V,
120W)
For IPPC 1960TP2E-AC
-- Power input: 100-240V~, 1.5A, 50-60Hz; Fuse: 250VAC/3A
-- Power connector: AC inlet (IEC60320 C14)
-- Power supply: 120W
ŒŒ Vibration:
-- IEC 68 2-64 (w/ HDD)
-- 1Grms @ sine, 5~500Hz, 1hr/axis (HDD operating)
-- 2Grms @ sine, 5~500Hz, 1hr/axis (CFast operating)
-- 2.2Grms @ random condition, 5~500Hz, 0.5hr/axis (non-operating)
ŒŒ Shock:
-- IEC 68 2-27
-- HDD: 20G @ wall mount, half sine, 11ms
ŒŒ Operating temperature: -10°C to 50°C
Ordering Information
System
ŒŒ IPPC 1960TP2E-DC (P/N: 10II1960T00X0)
19" SXGA LED backlight fanless touch panel PC, Intel® Core™ i53610ME 2.7GHz, touch screen, 4GB DDR3, 3 x COMs, DC power input
ŒŒ IPPC 1960TP2E-AC (P/N: 10II1960T01X0)
19" SXGA LED backlight fanless touch panel PC, Intel® Core™ i53610ME 2.7GHz, touch screen, 4GB DDR3, 6 x COMs, 4 x 4GPIO, 4 x
4DIO with isolated protection, AC power input
Optional
ŒŒ 24V/5A, 120W AC to DC DIN rail power adapter w/ o
power cord (P/N: 7440120001X00) (for IPPC 1960TP2EDC only)
ŒŒ Riser card 2 x PCI slots (P/N: 20JK036P200X0)
ŒŒ Riser card 2 x PCIex4 slots (P/N: 20JK036E200X2)
ŒŒ Fieldbus module universal kit (for IPPC 1960TP2E-DC
only)
88J50090E00X0
88J50090E01X0
88J50090E02X0
88J50090E03X0
88J50090E04X0
FBI 90E-PNM kit (w/ 25 cm cable)
FBI 90E-EP kit (w/ 25 cm cable)
FBI 90E-ECM kit (w/ 25 cm cable)
FBI 90E-PBM kit (w/ 25 cm cable)
FBI 90E-DNM kit (w/ 25 cm cable)
PROFINET master
EtherNet/IP master
EtherCAT master
PROFIBUS master
DeviceNET master
* Intel® Core™ i7/Intel® Celeron® B810/Intel® Pentium® B950: -10°C to 40°C
ŒŒ Storage temperature: -20°C to 75°C
ŒŒ Operating humidity: 10%~90% relative humidity, non-condensing
Limits to be at 90% RH at max 50°C
Certifications
ŒŒ CE (including EN61000-6-2/EN61000-6-4)
ŒŒ FCC Class A
Factory Automation Solution Product Selection Guide
53
IPPC 2132P
21.5" TFT WXGA 16:9 Heavy Industrial Panel PC with Intel® Atom™ D2550, 1.86GHz,
Multi-Touch Screen, 4GB DDR3, 4 x USB, 2 x COM and VGA
Main Features
ŒŒ Intel® Atom™ D2550, dual core, low power consumption CPU
ŒŒ Metal housing with robust aluminum front zero bezel for harsh
environment
ŒŒ 10 points P-Cap multi-touch with zero bezel flush front design
ŒŒ Dual GbE/2nd display-VGA/Line-out
ŒŒ USB x4/2 x Mini-PCIe sockets/1 x CFast/2 x RS232/422/485
ŒŒ DDR3 4GB/2.5" HDD bracket
ŒŒ IP66 compliant front panel
ŒŒ Support fieldbus module, JMobile HMI, Citect SCADA and
CODESYS SoftLogic (optional)
ŒŒ Mounting Support: panel/wall/stand/VESA 100mm x 100mm
ŒŒ Wide range power input 12V~ 30V DC
Product Overview
The 21.5" fanless panel PC IPPC 2132P incorporating an industrial motherboard is intended for versatile industrial applications. The panel PC has
a touch screen LED backlight LCD panel with 1920 x 1080 (Full HD) resolution. The front panel which adopts flush design and complies with IP66
standard makes it the perfect fit in industrial applications.
The IPPC 2132P supports WWAN/WLAN expansion and others via dual Gigabit Ethernet connectors, two Mini-PCIe slots and one SIM card holder.
With support for wide power input of 12V~30V, IPPC 2132P can gain a strong foothold in industrial field and machine devices. In addition, IPPC 2132P
can hook 2nd display via a VGA port for dual independent display. IPPC 2132P has two isolated RS232/422/485 ports, four isolated channels of DI
and DO, and optional fieldbus ports.
Specifications
Panel
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
LED size: 21.5", 16:9
Resolution: Full HD 1920 x 1080
Luminance: 300cd/m2
Contrast ratio: 5000
LCD color: 16.7M
Viewing angle: 89(U), 89(D), 89(L), 89(R)
Backlight: LED
Touch
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Ten points P-Cap (Projected Capacitive Touch)
Touch light transmission: 87%
Anti-scratch surface: 7H hardness
Touch interface: USB
Windows 8 compliance
System
ŒŒ CPU: On-board Intel® Atom™ dual core processor D2550, 1.86GHz, 1M
L2 Cache
ŒŒ BIOS: AMI BIOS
ŒŒ System chipset: Intel® NM10 Express chipset
ŒŒ System memory: 2 x 204-pin DDR3 SO-DIMM socket, 4GB DDR3
(default), support up to 4GB DDR3-800/1066, non-ECC and unbuffered
ŒŒ Storage device:
-- 1 x external locked CFast socket
54
Factory Automation Solution Product Selection Guide
-- 1 x hard drive bay: optional 1 x 2.5" SATA HDD or 1 x SATA DOM
ŒŒ Watchdog timer: Watchdog timeout can be programmable by
software from 1 second to 255 seconds and from 1 minute to 255
minutes (tolerance 15% under room temperature 25°C)
ŒŒ H/W status monitor: monitoring system temperature, and voltage
ŒŒ Expansion: 2 x Mini-PCIe sockets (support optional Wi-Fi, 3.5G module
or fieldbus card)
ŒŒ Panel backlight control button: Increase brightness/decrease
brightness/backlight on/off
ŒŒ Front Logo LED Indicator to show operating status
Rear I/O
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Ethernet: 2 x RJ45
2nd display VGA port: 1 x DB15
Audio port: 1 x Line-out
USB: 4 x USB 2.0
Power switch
Reset button
DIO w/ 2.5kv isolated:
4 x Digital Input (source type)
-- Input voltage (dry contact): Logic 0: Close to GND
-- Logic 1: open
-- Input voltage: Logic 0: 3V max
-- Logic 1: +5V ~ +30V
4 x digital output (sink type)
Dimension Drawing
547
562.4 (OUTLINE)
478.64 (A/V)
367
270
62.85
9.2
542
362
174.3
382.4 (OUTLINE)
270.11 (A/V)
22.21
25.85
-- Output voltage: 3.6V ~ 5V
-- Sink current: 200 mA max. per channel
ŒŒ COM #1: RS232/422/485 w/ 2.5kv isolated
ŒŒ COM #2: RS232/422/485 w/ 2.5kv isolated
ŒŒ Fieldbus: (protocol interface optional)
ŒŒ Operating humidity: 10%~90% relative humidity, non-condensing
ŒŒ Dimension: 562.4mm x 382.4mm x 62.85mm
ŒŒ Weight: 9.26Kg
Certifications
Model
Protocol
FBI90E-PNM
PROFINET master
FBI90E-EP
EtherNet/IP master
FBI90E-ECM
EtherCAT master
FBI90E-PBM
PROFIT master
DB9
DeviceNet master
5-pins Phoenix Contact
terminal
FBI90E-DNM
Connector
Dual RJ-45
Audio
ŒŒ AC97 codec: Realtek ALC886-GR
ŒŒ Audio interface: Line-out/Line-in/MIC-in audio Jack
Ethernet
ŒŒ LAN chip: dual Intel® 82574L Gigabit LAN
ŒŒ Ethernet interface: 10/100/1000 Based-Tx Ethernet compatible
Mechanical & Environment
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ CE (including EN61000-6-1/EN61000-6-2/EN61000-6-3/EN61000-6-4)
ŒŒ FCC Class B
ŒŒ UL 60950
Color: Pantone 425C\RAL 70 24 front bezel
IP protection: IP66 front
Mounting: panel/wall/stand/VESA 100mm x 100mm
System with panel mounting kit w/ o panel mounting hole
Power input: 12V~30VDC
Power adapter: Optional AC to DC power adaptor (+12V, 60W)
Vibration:
-- - IEC 68 2-64 (w/ HDD)
-- 1Grms @ sine, 5~500Hz, 1hr/axis (HDD operating)
-- 2Grms @ sine, 5~500Hz, 1hr/axis (CFast operating)
-- 2.2Grms @ random condition, 5~500Hz, 0.5hr/axis (non-operating)
ŒŒ Shock:
-- IEC 68 2-27
-- HDD: 20G@wall mount, half sine, 11ms
ŒŒ Operating temperature: -10°C to 60°C
ŒŒ Storage temperature: -20°C to 75°C
Ordering Information
Barebone
ŒŒ IPPC 2132P (P/N: 10II2132P00X0)
21.5" Full HD LED backlight touch panel PC, Intel® Atom™ D2550 1.86
GHz, touch screen, 4GB DDR3, 2 x RS232/422/485 and 4 x 4 DI/O with
isolated protection, brightness adjustment buttons, optional fieldbus
module options
ŒŒ 12V, 60W AC/DC power adapter w/ o power cord
(P/N: 7400060019X00)
ŒŒ PRONET master interface module: FBI90E-PNM for APPC
(P/N: 88IA1932T00X0)
ŒŒ EtherNet/IP master interface module: FBI90E-EP for
APPC (P/N: 88IA1932T01X0)
ŒŒ EtherCAT master interface module: FBI90E-ECM for
APPC (P/N: 88IA1932T02X0)
ŒŒ PROFIBUS master interface module: FBI90E-PBM for
APPC (P/N: 8IA1932T03X0)
ŒŒ DeviceNet master interface module: FBI90E-DNM for
APPC (P/N: 88IA1932T04X0)
Factory Automation Solution Product Selection Guide
55
IPPC 2160P
21.5" TFT Full HD 16:9 Heavy Industrial Panel PC with
3rd Generation Intel® Core™ i5, 2.7GHz, Multi-Touch
Main Features
ŒŒ
ŒŒ
ŒŒ
ŒŒ
16:9 21.5" Full HD fanless LED panel computer
Powerful 2nd/3rd generation Intel® Core™ processor
Two expansion slots for add-on PCI or/and PCIe cards
Optional 3.5G/Wi-Fi module/2.5" HDD/3 x Coms/GPIO/DIO/
Dimming control button
ŒŒ 10 points P-Cap multi-touch with zero bezel flush front design
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Metal housing with robust aluminum front bezel for harsh environment
IP66 compliant front panel
Anti-scratch surface: 7H hardness
Support fieldbus module, JMobile HMI, Citect SCADA and
CODESYS SoftLogic (optional)
ŒŒ Optional: AC power input model/DC power input model
Product Overview
IPPC 2160P is a heavy industrial panel PC equipped with powerful 2nd/3rd generation Intel® Core™ processor, TFT LCD panel with LED backlight
and user-friendly touch screen. It provides two expansion slots to support PROFINET, PROFIBUS, DeviceNet, EtherNet/IP and EtherCAT protocols.
The NEMA4/IP66 rated heavy-duty aluminum front bezel and the vibration-resistant rugged chassis are specifically designed for outdoor and harsh
industrial environments. IPPC 2160P is ideal for use in oil and gas rig, wind farms, chemical factories, pharmaceutical factories, and hazardous
working area. IPPC 2160P has two isolated RS232/422/485 ports and fieldbus ports.
Specifications
Panel
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
LED size: 21.5", 16:9
Resolution: Full HD 1920 x 1080
Luminance: 300cd/m2
Contrast ratio: 5000
LCD color: 16.7M
Viewing angle: 89(U), 89(D), 89(L), 89(R)
Backlight: LED
Touch
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Ten points P-Cap (Projected Capacitive Touch)
Touch light transmission: 87%
Anti-scratch surface: 7H hardness
Touch interface: USB
Windows 8 compliance
System
ŒŒ CPU: support 2nd/3rd gen. Intel® Core™ processor family, rPGA 988
-- Intel® Core™ i7-3520ME (2 x 2.9GHz, 4M cache, Max. TDP 35W)
-- Intel® Core™ i5-3610ME (2 x 2.7GHz, 3M cache, Max. TDP 35W)
(default)
-- Intel® Core™ i3-3120ME (2 x 2.4GHz, 3M cache, Max. TDP 35W)
-- Intel® Celeron® B810 (2 x 1.6GHz, 2M cache, Max. TDP 35W)
-- Intel® Pentium® B950 (2 x 2.1GHz, 2M cache, Max. TDP 35W)
ŒŒ BIOS: AMI BIOS
ŒŒ System chipset: Intel® HM76 Express chipset
ŒŒ System memory: 1 x 204-pin DDR3 SO-DIMM socket, 4G DDR3
56
Factory Automation Solution Product Selection Guide
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
(default), Support up to 8GB DDR3-1066/1333, non-ECC and unbuffered
Storage device:
-- 1 x external locked CFast socket
-- 2 x hard drive bay: optional 2 x 2.5" SATA HDD
-- 1 x SATA DOM (optional)
Watchdog timer: Watchdog timeout can be programmable by
software from 1 second to 255 seconds and from 1 minute to 255
minutes (tolerance 15% under room temperature 25°C)
H/W status monitor: monitoring system temperature, and voltage
Expansion: 2 x Mini-PCIe sockets (support optional Wi-Fi or 3.5G
module)
-- 2 x expansion slots for add-on PCI or/and PCIe cards
-- 1 x PCI and 1 x PCIex4 slots (default)
-- 2 x PCIex4 slots
-- 2 x PCI slots
Panel backlight control button: increase brightness/decrease
brightness/backlight on/off
Rear I/O
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Ethernet: 2 x RJ45
2nd display VGA port: 1 x DB15
Audio port: 1 x Line-out; 1 x Line-in; 1 x MIC-in
USB: 4 x USB 2.0
2 x PS2 keyboard/mouse
AC power switch
Reset button
367.00
Dimension Drawing
547.00
542.00
92.27
19.15
382.40
6.70
362.00
562.40
ŒŒ DIO w/ 2.5kv isolated protection:
4 x digital input (source type)
-- Input voltage (dry contact): Logic 0: Close to GND
Logic 1: open
-- Input voltage: Logic 0: 3V max.
Logic 1: +5 to 30V
4 x digital output (Sink type)
-- Output voltage: +3.6 to 5V
-- Sink current: 200mA max. per channel
ŒŒ GPIO: 4 x digital in/4 x digital out
ŒŒ COM #1: RS232/422/485 w/ 2.5kv isolated protection
ŒŒ COM #2: RS232/422/485 w/ 2.5kv isolated protection
ŒŒ COM #3: RS232 w/ RI or 5V or 12V selection
ŒŒ COM #4: RS232 w/ RI or 5V or 12V selection
ŒŒ COM #5: RS232
ŒŒ COM #6: RS232
ŒŒ LPT: 1 x parallel port
Audio
ŒŒ AC97 codec: Realtek ALC886-GR
ŒŒ Audio interface: Line-out/Line-in/MIC-in audio Jack
Ethernet
ŒŒ LAN chip: dual Intel® 82574L Gigabit LAN
ŒŒ Ethernet interface: 10/100/1000 Based-Tx Ethernet compatible
Fieldbus
ŒŒ Support one special fieldbus module kit
Mechanical & Environment
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Color: pantone 432C\ RAL 70 24 front bezel
Enclosure: aluminum front bezel with SPPC nickel plated housing
IP protection: IP66 front
Mounting: panel/wall/stand/VESA 100mm x 100mm
System with panel mounting kit w/ o Panel mounting hole
Power input: 100-240V~,1.5A,50-60Hz; Fuse: 250VAC/3A
Power connector: AC inlet (IEC60320 C14)
Power supply: 120W
ŒŒ Vibration:
12.00
-- IEC 68 2-64 (w/ HDD)
-- 1Grms @ sine, 5~500Hz, 1hr/axis (HDD operating)
-- 2Grms @ sine, 5~500Hz, 1hr/axis (CFast operating)
-- 2.2Grms @ random condition, 5~500Hz, 0.5hr/axis (non-operating)
ŒŒ Shock:
-- IEC 68 2-27
-- HDD: 20G @ wall mount, half sine, 11ms
ŒŒ Operating temperature: -10°C to 50°C
* Intel® Core™ i7/Intel® Celeron® B810/Intel® Pentium® B950: -10°C to 40°C
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Storage temperature: -20°C to 75°C
Operating humidity: 10%~90% relative humidity, non-condensing
Dimension: 562.4mm x 382.4mm x 92.27mm
Weight: 12.51Kg
Certifications
ŒŒ CE (including EN61000-6-1/EN61000-6-2/EN61000-6-3/EN61000-6-4)
ŒŒ FCC Class B
Ordering Information
System
ŒŒ IPPC 2160PP2E-AC (P/N: 10II2160P00X0)
21.5" Full HD LED backlight fanless touch panel PC, Intel® Core™ i53610ME 2.7GHz, ten points P-Cap touch screen, 4GB DDR3, 6 x COMs,
4 x 4 GPIO, 4 x 4 DI/O with isolated protection, AC power input
Option
ŒŒ Riser card 2 x PCI slots (P/N: 20JK036P200X0)
ŒŒ Riser card 2 x PCIex4 slots (P/N: 20JK036E200X2)
Factory Automation Solution Product Selection Guide
57
eTOP 504
4.3" TFT WVGA HMI Panel PC with Touch Screen
Main Features
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
4.3" TFT color display, LED backlight
480 x 272 pixel resolution, 64K colors
Resistive touchscreen
2 Ethernet ports with switch function
USB Host ports
ŒŒ SD Card Slot
ŒŒ Multistandard Serial Port
ŒŒ Connection to fieldbus systems and I/O using optional plug-in
modules
Product Overview
As a partner of well-known EXOR International S.p.A., NEXCOM integrates EXOR’s HMI solution into eTOP HMI series. The eTOP Series 500 HMI products
combine state-of-the-art features and top performance with an outstanding design. They are the ideal choice for all demanding HMI applications including
factory and building automation. The eTOP 504 features a bright 4:3" TFT widescreen display with a fully dimmable LED backlight. The JMobile software
offers full vector graphic capabilities and plenty of connectivity options.
JMobile runtime included. Full compatibility with JMobile Studio.
ŒŒ Full vector graphic support. Native support of SVG graphic objects. Transparency and alpha blending.
ŒŒ Multilanguage applications. Easily create and manage your applications in multiple languages to meet global requirements. Far East languages are
supported. Tools available in JMobile Studio support easy third-party translations and help reducing development and maintenance costs of the
application.
ŒŒ Data display in numerical, text, bargraph, analog gauges and graphic image formats.
ŒŒ Rich set of state-of-the-art HMI features: data acquisition, alarm handling, scheduler and timed actions (daily and weekly schedulers, exception dates),
recipes, users and passwords, e-mail and RSS feeds, rotating menus
ŒŒ Includes support for a wide range of communication drivers for Factory and Building Automation systems.
ŒŒ Multiple drivers communication capability
ŒŒ Remote monitoring and control. Client- Server functionality. Mobile clients supported.
ŒŒ Remote maintenance and support with VNC-based functionality.
ŒŒ Off-line simulation of the HMI application with JMobile Studio.
ŒŒ Powerful scripting language for automating HMI applications. Script debugging improves efficiency in application development.
ŒŒ Rich gallery of symbols and objects.
ŒŒ Project templates
ŒŒ Optional plug-in modules for fieldbus systems, I/O and controllers.
ŒŒ Display backlight dimmable to 0%.
Specifications
Panel
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
LED Size: 4:3"
Resolution: WVGA 480 x 272
Luminance: 150cd/m2
LCD color: 64K
Active display area: 4.3" diagonal (95.4 x 53.9mm)
Backlight: LED
System Resources
ŒŒ Operating System: Microsoft Windows CE6.0
58
Factory Automation Solution Product Selection Guide
ŒŒ User Memory: 128MB Flash
ŒŒ RAM: 256MB DDR
Operator Interface
ŒŒ Touchscreen: Analog resistive
ŒŒ LED indicators: 1 (dual color)
Interface
ŒŒ Ethernet: 2 10/100Mbit with integrated Switch
ŒŒ USB: 1 Host Interface
Dimension Drawing
56
4
136
ŒŒ Serial: RS232/422/485 software configuration
ŒŒ Expansion Slot: 1 Optional plug-in
ŒŒ Memory Card: SD Card Slot
Functionality
ŒŒ Vector Graphic: Yes, includes SVG support
ŒŒ Object dynamics: Yes, Visibility, opacity, position, size, rotation for
most object types
ŒŒ TrueType Font: Yes
ŒŒ Multiple driver communication: Yes
ŒŒ Data acquisition and trend presentation: Yes, Flash memory storage
limited only by available memory
ŒŒ Multilanguage: Yes, with runtime language switching
ŒŒ Recipes: Yes, Flash memory storage limited only by available memory
ŒŒ Alarms: Yes
ŒŒ Historical event list: Yes
ŒŒ Users and Passwords: Yes
ŒŒ Hardware Real Time Clock: Yes, with battery back-up
ŒŒ Screen saver: Yes
ŒŒ Buzzer: Yes, audible feedback for touch screen
96
107
147
Certifications
ŒŒ CE (Emission EN61000-6-4; Immunity EN61000-6-2 for installation in
industrial environments)
ŒŒ DNV Type Approval Certificate
ŒŒ cULus (UL508 Listed Haz. Loc. Class I, Division 2, Group A,B,C, and D)
ŒŒ C-Tick
Ordering Information
ŒŒ eTOP 504 (P/N: 79IE050401X00) +ETOP504U3P1
7" widescreen TFT color touchscreen with Ethernet and USB
interfaces. JMobile run-time.
Ratings
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Power supply voltage: 24Vdc (10 to 32 Vdc)
Current consumption: 0.55A at 24Vdc (max.)
Fuse: Automatic
Weight: Approx. 1Kg
Battery: Rechargeable Lithium battery, not user- replaceable
Environmental Conditions
ŒŒ Operating temperature: 0°C to 50°C (vertical installation)
ŒŒ Storage temperature: -20°C to 70°C
ŒŒ Operating and storage humidity: 5% ~ 85% relative humidity, noncondensing
ŒŒ Protection class: IP66 (front), IP20 (rear)
Dimensions
ŒŒ Faceplate LxH: 147 x 107mm
ŒŒ Cutout AxB: 136 x 96mm
ŒŒ Depth D+T: 56 + 4mm
Factory Automation Solution Product Selection Guide
59
eTOP 507
7" TFT WVGA HMI Panel PC with Touch Screen
Main Features
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
7" TFT color display, LED backlight
800 x 480 pixel (WVGA) resolution, 64K colors
Resistive touchscreen
2 Ethernet ports with switch function
2 USB Host ports
ŒŒ SD Card Slot
ŒŒ Connection to fieldbus systems and I/O using optional plug-in
modules
ŒŒ Slim design. Mounting depth less than 50mm
Product Overview
As a partner of well-known EXOR International S.p.A., NEXCOM integrates EXOR’s HMI solution into eTOP HMI series. The eTOP Series 500 HMI products
combine state-of-the-art features and top performance with an outstanding design. They are the ideal choice for all demanding HMI applications including
factory and building automation. The eTOP 507 features a bright 7" TFT widescreen (16:9) display with a fully dimmable LED backlight. The JMobile software
offers full vector graphic capabilities and plenty of connectivity options.
JMobile runtime included. Full compatibility with JMobile Studio.
ŒŒ Full vector graphic support. Native support of SVG graphic objects. Transparency and alpha blending.
ŒŒ Multilanguage applications. Easily create and manage your applications in multiple languages to meet global requirements. Far East languages are
supported. Tools available in JMobile Studio support easy third-party translations and help reducing development and maintenance costs of the
application.
ŒŒ Data display in numerical, text, bargraph, analog gauges and graphic image formats.
ŒŒ Rich set of state-of-the-art HMI features: data acquisition, alarm handling, scheduler and timed actions (daily and weekly schedulers, exception dates),
recipes, users and passwords, e-mail and RSS feeds, rotating menus
ŒŒ Includes support for a wide range of communication drivers for Factory and Building Automation systems.
ŒŒ Multiple drivers communication capability
ŒŒ Remote monitoring and control. Client- Server functionality. Mobile clients supported.
ŒŒ Remote maintenance and support with VNC-based functionality.
ŒŒ Off-line simulation of the HMI application with JMobile Studio.
ŒŒ Powerful scripting language for automating HMI applications. Script debugging improves efficiency in application development.
ŒŒ Rich gallery of symbols and objects.
ŒŒ Project templates
ŒŒ Optional plug-in modules for fieldbus systems, I/O and controllers.
ŒŒ Display backlight dimmable to 0%.
Specifications
Panel
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
LED Size: 7", 16:9
Resolution: WVGA 800 x 480
Luminance: 300cd/m2
LCD color: 64K
Active display area: 7" diagonal
Backlight: LED
System Resources
ŒŒ Operating System: Microsoft Windows CE6.0
60
Factory Automation Solution Product Selection Guide
ŒŒ User Memory: 128MB Flash
ŒŒ RAM: 256MB DDR
Operator Interface
ŒŒ Touchscreen: Analog resistive
ŒŒ LED indicators: 1 (dual color)
Interface
ŒŒ Ethernet: 2 10/100Mbit with integrated Switch
ŒŒ USB: 2 Host Interface (1 version 2.0, 1 version 2.0 and 1.1)
Dimension Drawing
4
176
136
47
147
187
Cut-out
ŒŒ Serial: RS232/422/485 software configuration
ŒŒ Expansion Slot: 2 Optional plug-in
ŒŒ Memory Card: SD Card Slot
Functionality
ŒŒ Vector Graphic: Yes, includes SVG support
ŒŒ Object dynamics: Yes, Visibility, opacity, position, size, rotation for
most object types
ŒŒ TrueType Font: Yes
ŒŒ Multiple driver communication: Yes
ŒŒ Data acquisition and trend presentation: Yes, Flash memory storage
limited only by available memory
ŒŒ Multilanguage: Yes, with runtime language switching
ŒŒ Recipes: Yes, Flash memory storage limited only by available memory
ŒŒ Alarms: Yes
ŒŒ Historical event list: Yes
ŒŒ Users and Passwords: Yes
ŒŒ Hardware Real Time Clock: Yes, with battery back-up
ŒŒ Screen saver: Yes
ŒŒ Buzzer: Yes, audible feedback for touch screen
Certifications
ŒŒ CE (Emission EN61000-6-4; Immunity EN61000-6-2 for installation in
industrial environments)
ŒŒ DNV Type Approval Certificate
ŒŒ cULus (UL508 Listed Haz. Loc. Class I, Division 2, Group A,B,C, and D)
ŒŒ C-Tick
ŒŒ GL (Germanischer Lloyd Type Approval Certificate)
Ordering Information
ŒŒ eTOP 507 (P/N: 79IE050701X00) +ETOP507U3P3
7" widescreen TFT color touchscreen with Ethernet and USB
interfaces. JMobile run-time.
Ratings
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Power supply voltage: 24Vdc (10 to 32 Vdc)
Current consumption: 0.65A at 24Vdc (max.)
Fuse: Automatic
Weight: Approx. 1Kg
Battery: Rechargeable Lithium battery, not user- replaceable
Environmental Conditions
ŒŒ Operating temperature: 0°C to 50°C (vertical installation)
ŒŒ Storage temperature: -20°C to 70°C
ŒŒ Operating and storage humidity: 5% ~ 85% relative humidity, noncondensing
ŒŒ Protection class: IP66 (front), IP20 (rear)
Dimensions
ŒŒ Faceplate LxH: 187 x 147mm
ŒŒ Cutout AxB: 176 x 136mm
ŒŒ Depth D+T: 47 + 4mm
Factory Automation Solution Product Selection Guide
61
eTOP 510
10.4" TFT SVGA HMI Panel PC with Touch Screen
Main Features
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
10.4" TFT color display, LED backlight
800 x 600 pixel (SVGA) resolution, 64K colors
Resistive touchscreen
2 Ethernet ports with switch function
2 USB Host ports
ŒŒ SD Card Slot
ŒŒ Connection to fieldbus systems and I/O using optional plug-in
modules
ŒŒ Slim design. Mounting depth less than 50mm
Product Overview
As a partner of well-known EXOR International S.p.A., NEXCOM integrates EXOR’s HMI solution into eTOP HMI series. The eTOP Series 500 HMI products
combine state-of-the-art features and top performance with an outstanding design. They are the ideal choice for all demanding HMI applications including
factory and building automation. The eTOP 510 features a bright 10.4" TFT display with a fully dimmable LED backlight. The JMobile software offers full
vector graphic capabilities and plenty of connectivity options.
JMobile runtime included. Full compatibility with JMobile Studio.
ŒŒ Full vector graphic support. Native support of SVG graphic objects. Transparency and alpha blending.
ŒŒ Full object dynamics: control visibility and transparency, move, resize, rotate any object on screen. Change properties of basic and complex objects.
ŒŒ Multilanguage applications. Easily create and manage your applications in multiple languages to meet global requirements. Far East languages are
supported. Tools available in JMobile Studio support easy third-party translations and help reducing development and maintenance costs of the application
ŒŒ Data display in numerical, text, bargraph, analog gauges and graphic image formats.
ŒŒ Rich set of state-of-the-art HMI features: data acquisition, alarm handling, scheduler and timed actions (daily and weekly schedulers, exception dates),
recipes, users and passwords, e-mail and RSS feeds, rotating menus.
ŒŒ Includes support for a wide range of communication drivers for Factory and Building Automation systems.
ŒŒ Multiple drivers communication capability.
ŒŒ Remote monitoring and control. Client- Server functionality. Mobile clients supported.
ŒŒ Remote maintenance and support with VNC-based functionality.
ŒŒ Off-line simulation of the HMI application with JMobile Studio.
ŒŒ Powerful scripting language for automating HMI applications. Script debugging improves efficiency in application development.
ŒŒ Rich gallery of symbols and objects.
ŒŒ Project templates
ŒŒ Optional plug-in modules for fieldbus systems, I/O and controllers.
ŒŒ Display backlight dimmable to 0%.
Specifications
Panel
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
LED Size: 10.4"
Resolution: SVGA 800 x 600
Luminance: 300cd/m2
LCD color: 64K
Active display area: 10.4" diagonal
Backlight: LED
System Resources
ŒŒ Operating System: Microsoft Windows CE6.0
ŒŒ User Memory: 256MB Flash
62
Factory Automation Solution Product Selection Guide
ŒŒ RAM: 256MB DDR
Operator Interface
ŒŒ Touchscreen: Analog resistive
ŒŒ LED indicators: 1 (dual color)
Interface
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Ethernet: 2 10/100Mbit with integrated Switch
USB: 2 Host Interface (1 version 2.0, 1 version 2.0 and 1.1)
Serial: RS232/422/485 software configuration
Expansion Slot: 2 Optional plug-in
232
Dimension Drawing
287
56
4
221
276
ŒŒ Memory Card: SD Card Slot
Functionality
ŒŒ Vector Graphic: Yes, includes SVG support
ŒŒ Object dynamics: Yes, Visibility, opacity, position, size, rotation for
most object types
ŒŒ TrueType Font: Yes
ŒŒ Multiple driver communication: Yes
ŒŒ Data acquisition and trend presentation: Yes, Flash memory storage
limited only by available memory
ŒŒ Multilanguage: Yes, with runtime language switching
ŒŒ Recipes: Yes, Flash memory storage limited only by available memory
ŒŒ Alarms: Yes
ŒŒ Historical event list: Yes
ŒŒ Users and Passwords: Yes
ŒŒ Hardware Real Time Clock: Yes, with battery back-up
ŒŒ Screen saver: Yes
ŒŒ Buzzer: Yes, audible feedback for touch screen
ŒŒ CE (Emission EN61000-6-4; Immunity EN61000-6-2 for installation in
industrial environments)
ŒŒ DNV Type Approval Certificate
ŒŒ cULus (UL508 Listed Haz. Loc. Class I, Division 2, Group A,B,C, and D)
ŒŒ C-Tick
Ordering Information
ŒŒ eTOP 510 (P/N: 79IE051001X00) +ETOP510U3P1
10"4 TFT color touchscreen with Ethernet and USB interfaces. JMobile
run-time.
Ratings
ŒŒ
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Power supply voltage: 24Vdc (10 to 32 Vdc)
Current consumption: 0.95A at 24Vdc (max.)
Fuse: Automatic
Weight: Approx. 2.1Kg
Battery: Rechargeable Lithium battery, not user- replaceable
Environmental Conditions
ŒŒ Operating temperature: 0°C to 50°C (vertical installation)
ŒŒ Storage temperature: -20°C to 70°C
ŒŒ Operating and storage humidity: 5% ~ 85% relative humidity, noncondensing
ŒŒ Protection class: IP66 (front), IP20 (rear)
Dimensions
ŒŒ Faceplate LxH: 287 x 232mm
ŒŒ Cutout AxB: 276 x 221mm
ŒŒ Depth D+T: 56 + 4mm
Certifications
Factory Automation Solution Product Selection Guide
63
HMI Product Selection
eTOP506
5.7” TFT color display, LED backlight
ƒƒ 320 x 240 pixel (QVGA) resolution, 64K colors, resistive touchscreen
ƒƒ 2 Ethernet ports with switch function
ƒƒ 2 USB Host ports, 1 x SD card slot
ƒƒ Connection to bus systems using optional plug-in modules
ƒƒ Slim design. Mounting depth less than 50mm
ƒƒ Powerful and intuitive programming with JMobile software
ƒƒ Available in three front colors (White/Black/Silver)
ƒƒ CE, DNV, cULus Class I, Div. 2
eTOP512
12”1 SVGA TFT color display, LED backlight
ƒƒ 800 x 600 pixel (SVGA) resolution, 64K colors, 256MB Flash, resistive
touchscreen
ƒƒ 2 Ethernet ports with switch function
ƒƒ 2 USB Host ports, 1 x SD card slot, 1 x PDF reader
ƒƒ Connection to bus systems using optional plug-in modules
ƒƒ Slim design. Mounting depth less than 50mm
ƒƒ Powerful and intuitive programming with JMobile software
ƒƒ Available in three front colors (White/Black/Silver)
ƒƒ CE, DNV, cULus Class I, Div. 2
eTOP513
13”3 WXGA TFT wide color display, LED backlight
ƒƒ 1280 x 800 pixel resolution, 64K colors, 256MB Flash, resistive touchscreen
ƒƒ 2 Ethernet ports with switch function
ƒƒ 2 USB Host ports, 1 x SD card slot, 1 x PDF reader
ƒƒ Connection to bus systems using optional plug-in modules
ƒƒ Slim design. Mounting depth less than 50mm
ƒƒ Powerful and intuitive programming with JMobile software
ƒƒ Available in three front colors (White/Black/Silver)
ƒƒ CE, DNV, cULus Class I, Div. 2
eTOP515
15" XGA TFT color display, LED backlight
ƒƒ 1024 x 768 pixel resolution, 64K colors, 256MB Flash, resistive touchscreen
ƒƒ 2 Ethernet ports with switch function
ƒƒ 2 USB Host ports, 1 x SD card slot, 1 x PDF reader
ƒƒ Connection to bus systems using optional plug-in modules
ƒƒ Slim design. Mounting depth less than 50mm
ƒƒ Powerful and intuitive programming with JMobile software
ƒƒ Available in three front colors (White/Black/Silver)
ƒƒ CE, DNV, cULus Class I, Div. 2
64
Factory Automation Solution Product Selection Guide
FBI90E-DNM
FBI90E-DNM (P/N: 10J50090E03X0)
DeviceNet Master Mini-PCIe Interface Card
FBI 90E-DNM Universal Kit (P/N: 10J50090E10X0)
Main Features
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Support DeviceNet Master Interface
Mini-PCIe Form Factor
Fully Compatible with DeviceNet I/O Modules and Slave Devices
Driver Support for Windows, WinCE, RTX, QNX, VxWorks, Linux
ŒŒ 1 x 5-pins Phoenix Contact Connectors
ŒŒ User Friendly Configuration Utility
ŒŒ OPC Server Support (Optional)
Product Overview
DeviceNet is the communication protocol developed by Allen-Bradley. It is the typical protocol used in the Allen-Bradley compatible slave devices and
remote I/O modules. It is very popular in factory automation application in American and Asian area. By using this interface card in PC-based platform, it
can easily to establish the Allen-Bradley compatible PC-based control system.
Specifications
Ordering Information
Form Factor
ŒŒ FBI90E-DNM (P/N: 10J50090E03X0)
ŒŒ Mini-PCIe card with separated connector board
Mini-PCIe DeviceNet master card
Slaves Max.
Cable length: 15cm
ŒŒ 63
ŒŒ FBI 90E-DNM Universal Kit (P/N: 10J50090E10X0)
Cyclic Data Max.
Mini-PCIe DeviceNet master module kit w/ universal bracket
ŒŒ 7168, 255 Bytes/Slave
Cable length: 25cm
Acylic Data
ŒŒ Get/Set_Attribute
I/O Connections
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Poll
Change-of-State
Cyclic
Bit-Strobe
Functions
ŒŒ Predefined Master-Slave
ŒŒ Connection Set
ŒŒ UCMM supported
Factory Automation Solution Product Selection Guide
65
FBI90E-PBM
Profibus Master Mini-PCIe Interface Card
FBI90E-PBM (P/N: 10J50090E01X0)
FBI 90E-PBM Universal Kit (P/N:10J50090E09X0)
Main Features
ŒŒ Support Profibus-DP Master Interface
ŒŒ Mini-PCIe Form Factor
ŒŒ Fully Compatible with Profibus Remote I/O Modules and Slave
Devices
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Driver Support for Windows, WinCE, RTX, QNX, VxWorks, Linux
1 x DB-9 Connectors
User Friendly Configuration Utility
OPC Server Support (Optional)
Product Overview
The Profibus is the protocol developed by Siemens. It is the major communication protocol in Siemens system and it is almost the most popular industrial
communication protocol in worldwide. In factory automation application system, this protocol is with over 40% marketing share. And it is the basic network
protocol for Siemens system. By equipping this interface, it can be compatible with lots of the Siemens systems in factory automation application.
Specifications
Ordering Information
Form Factor
ŒŒ FBI90E-PBM (P/N: 10J50090E01X0)
ŒŒ Mini-PCIe card with separated connector board
Mini-PCIe Profibus master card
I/O Devices Max.
Cable length: 15cm
ŒŒ 125
Cyclic Data Max.
ŒŒ 7168, 244 Bytes/Slave
Acylic Data
ŒŒ 240 Bytes/Request
DPVI Class 1, 2
ŒŒ Yes
Configuration Data
ŒŒ 244 Bytes/Slave
Appl. Specific Parameter
ŒŒ 237 Bytes/Slave
66
Factory Automation Solution Product Selection Guide
ŒŒ FBI 90E-PBM Universal Kit (P/N:10J50090E09X0)
Mini-PCIe Profibus master module kit w/ universal bracket
Cable length: 25cm
FBI90E-REM
FBI90E-REM (P/N: 10J50090E00X0)
Main Features
ŒŒ Support ProfiNET, Ethernet/IP, EtherCAT Master Interface
(depends on the downloaded firmware)
ŒŒ Real Time Ethernet Communication
ŒŒ Mini-PCIe Form Factor
ŒŒ Driver Support for Windows, WinCE, RTX, QNX, VxWorks, Linux
Industrial Real Time Ethernet Fieldbus
ProfiNET/Ethernet IP/EtherCAT Master Interface card
FBI 90E-REM Universal Kit (P/N:10J50090E08X0)
ŒŒ Fully Compatible with ProfiNET, Ethernet/IP, EtherCAT Controllers
and I/O Modules
ŒŒ 2 x RJ45 Connectors
ŒŒ User Friendly Configuration Utility
ŒŒ OPC Server Support (Optional)
Product Overview
The FBI 90E-REM is the Fieldbus module supports industrial real time Ethernet Fieldbus protocols for ProfiNET, Ethernet/IP, EtherCAT. Users can download
the required firmware to make this card as the master interface for these protocols. By equipping this interface card, it can enable the platform to be the
control station for the ProfiNET, Ethernet/IP, EtherCAT slave devices.
Specifications
Form Factor
ŒŒ Mini-PCIe card with separated connector board
ProfiNET Master
ŒŒ
ŒŒ
ŒŒ
ŒŒ
I/O Devices max.: 128
Cyclic Data max.: 11472 Bytes
Acylic Data : Read/Write Record max 4096 Bytes/Request
Functions:
Alarmtreatment
DCP
Minimum cycle time 1 ms
Ethernet/IP
ŒŒ Cyclic Data max.: 11472 Bytes
ŒŒ Unscheduled Data max.: 504 Bytes per Telegram
ŒŒ Functions:
Max. 64 connections
Cyclic Connection
UCMM class 3 supported
DHCP, BOOTP
ŒŒ Server Service
Get_Attribute_Single/All
Set_Attribute_Single/All
ŒŒ Functions:
Get OD List
Emergency
Topology Line
Ordering Information
ŒŒ FBI90E-REM (P/N: 10J50090E00X0)
Mini-PCIe ProfINET/Ethernet IP/EtherCAT master card
Cable length: 15cm
ŒŒ FBI 90E-REM Universal Kit (P/N:10J50090E08X0)
Mini-PCIe ProfINET/Ethernet IP/EtherCAT master module kit w/
universal bracket
Cable length: 25cm
EtherCAT Master
ŒŒ Slaves max.: 200
ŒŒ Cyclic Data max.: 11520 Bytes
ŒŒ Acylic Data: CoE (CANopen over EtherCAT)
Up-/Download max. 1500 Bytes
Factory Automation Solution Product Selection Guide
67
IEC61131-3 SoftLogic
CODESYS SoftLogic Control Kernel
Integrate Control Programming Tool & Fieldbus
I/O Configurator Together
Main Features
Product Overview
IEC61131-3 is the most popular standard for control programming language for automation application. It defines the easy to use and easy to maintain
program language standard for automation users. NEXCOM implement the CODESYS SoftLogic as control kernel for NIFE PC-based controller. CODESYS is
developed by 3S-Smart Software Solution GmbH. It is well known by its high reliability, high integration with Fieldbus communication and user friendly interface.
3S is the alliance partner of Hilscher for Fieldbus technology. CODESYS integrated the Hilscher interface and driver to drive the Fieldbus device and remote
I/O. It merges the Hilscher Fieldbus Configurator tool and SoftLogic programmer together. So users can just use CODESYS software to configure the
Fieldbus and program the control algorism. It is 100% the same as typical PLC controller software tool. NIFE PC-based controller is also with this feature.
CODESYS is also implemented as control kernel for some product lines by Schneider, ABB, BECKHOFF, B&R and so on. In these product lines, Hilscher Fieldbus
technology is also built-in as the communication interface. It means NEXCOM NIFE PC-based controller is the same level as these trusted brands. Users won’t have
only choice for high price European PC-based control systems, they can use the reasonable cost to have the high quality, high reliability PC-based control solution.
The version of CODESYS that NEXCOM implemented is CODESYS RTE runtime. It is with real time engine for runtime kernel to guarantee the control
performance. The supported OS covers Windows XP/7/embedded and Linux. Users can choose the OS depends their requirement. We also provide the
option for bundling the TagetVisu software module. It can provide the SoftLogic and HMI bundle solution.
NEXCOM offer the package for CODESYS runtime includes the below listed versions.
68
For Windows XP/7 (X86 Platform)
For Linux (X86 Platform)
ŒŒ CODESYS SoftLogic RTE Runtime
ŒŒ CODESYS SoftMotion Runtime
ŒŒ
ŒŒ
ŒŒ
ŒŒ
CODESYS SoftLogic
CODESYS SoftMotion CNC+TargetVisu
Factory Automation Solution Product Selection Guide
CODESYS SoftLogic RTE Runtime
CODESYS SoftLogic+TargetVisu Runtime
CODESYS SoftMotion CNC Runtime
CODESYS SoftMotion CNC+TargetVisu Runtime
Fieldbus I/O Solution
VIPA SLIO Series
Main Features
Product Overview
NEXCOM’s I/O solution allies VIPA SLIO series. VIPA is the expertise in PLC technology. Their I/O modules are very popular in industrial automation market.
VIPA SLIO is the micro form factory with high speed bus responding time. And it supports all of the Fieldbus communication. By equipping different coupler,
it can be the remote IO for various Fieldbus network. Combining NEXCOM's NIFE PC-based controller and VIPA SLIO series, uses can easily establish the
completed PC-based control station.
VIPA SLIO is with VIPA high reliability remote IO technology. The compact size for VIPA SLIO can save the installation space. The docking station modularized
design is for easy maintenance. Users don't have to remove the wiring to change the I/O module. The fully option for the I/O modules can satisfy the
requirement for any automation application.
Features
Compact and Space-Saving Design
ŒŒ
ŒŒ
ŒŒ
ŒŒ
Conceptual separation of electronic and installation layer
Space-saving, thin design
Innovative staircase-shaped wiring layer
Simple "Two components set-up"
Clever Labeling and Diagnostic Concept
ŒŒ Clear allocation and readability of channel states
ŒŒ Simple, time-saving installation and maintenance by means of the
connector pin assignment provided on the module
ŒŒ Clear, definite labeling of channels
ŒŒ Reference designator label remains on the exchange of a module
Installation and Maintainability
ŒŒ "Permanent Wiring" enables the exchanging without the
disconnection of the wiring
ŒŒ Intelligent slide and plug mechanism for a simple handling
ŒŒ Electronic is protected against reverse polarity
ŒŒ Encoding of the electronic modules prevents from incorrect plugging
Ordering Information
Order No.
Description
Clamp Modules
001-1BA00
CM 001 - Potential distributor module8xDC 24V clamps
001-1BA10
CM 001 - Potential distributor module8xDC 0V clamps
001-1BA20
CM 001 - Potential distributor module4xDC 24V, 4xDC
0V clamps
Power Modules
007-1AB00
PM 007 - Power modulePower supply DC 24V,
10AReverse polarity protectionOvervoltage protection
007-1AB10
PM 007 - Power modulePower supply DC 24V, 4APower
supply DC 24V for bus supply 5V, 2AReverse polarity
protectionOvervoltage protection
Digital Input Modules
High Performanc
021-1BB00
SM 021 - Digital input2 inputs
ŒŒ Quick backplane bus concept of 48MBit/s
ŒŒ With ETS modules it is possible to switch exactly up to +-1us
independent of fieldbus
021-1BB10
SM 021 - Digital input2 fast inputsInput filter time delay
parameterizable 2µs…4ms
021-1BB50
SM 021 - Digital input2 inputsActive low input
Factory Automation Solution Product Selection Guide
69
021-1BB70
SM 021 - Digital input2 inputsTime stamp
031-1CB70
SM 031 - Analog input2 inputs 16BitVoltage -10 V…+10 V
021-1BD00
SM 021 - Digital input4 inputs
031-1CD30
SM 031 - Analog input4 inputs 16BitVoltage 0…10 V
021-1BD10
SM 021 - Digital input4 fast inputsInput filter time delay
parameterizable 2µs…4ms
031-1CD40
SM 031 - Analog input4 inputs 16BitCurrent 0(4)…20mA
021-1BD40
SM 021 - Digital input4 inputsConnect 2/3 wire
031-1CD70
SM 031 - Analog input4 inputs 16BitVoltage -10 V…+10 V
021-1BD50
SM 021 - Digital input4 inputsActive low input
031-1LB90
SM 031 - Analog input2 inputs
16BitThermocoupleVoltage -80mV…+80mV
021-1BD70
SM 021 - Digital input4 inputsTime stamp
031-1LD80
SM 031 - Analog input4 inputs 16Bit0…3000 ohm
resistanceResistance measurement with 2, 3 and 4-wires
021-1BF00
SM 021 - Digital input8 inputs
021-1BF50
SM 021 - Digital input8 inputsActive low input
021-1SD00
SM 021 - Digital input4 inputsSafety
Digital Output Modules
022-1BB00
SM 022 - Digital output2 outputsOutput current 0,5 A
022-1BB20
SM 022 - Digital output2 outputsOutput current 2 A
022-1BB50
SM 022 - Digital output2 Low-Side outputsOutput current
0,5 A
022-1BB70
SM 022 - Digital output2 outputsTime stampOutput
current 0,5 A
032-1BB30
SM 032 - Analog output2 outputs 12BitVoltage 0…10 V
032-1BB40
SM 032 - Analog output2 outputs 12BitCurrent 0(4)…20
mA
032-1BB70
SM 032 - Analog output2 outputs 12BitVoltage -10
V…+10 V
032-1BD30
SM 032 - Analog output4 outputs 12BitVoltage 0…10 V
032-1BD40
SM 032 - Analog output4 outputs 12BitCurrent
0(4)…20mA
032-1BD70
SM 032 - Analog output4 outputs 12BitVoltage -10
V…+10 V
032-1CB30
SM 032 - Analog output2 outputs 16BitVoltage 0…10 V
032-1CB70
SM 032 - Analog output2 outputs 16BitVoltage -10
V…+10 V
022-1BB90
SM 022 - Digital output2 outputsPWM
022-1BD00
SM 022 - Digital output4 outputsOutput current 0,5 A
022-1BD20
SM 022 - Digital output4 outputsOutput current 2 A
022-1BD50
SM 022 - Digital output4 Low-Side outputsOutput current
0,5 A
032-1CD30
SM 032 - Analog output4 outputs 16BitVoltage 0…10 V
022-1BD70
SM 022 - Digital output4 outputsTime stampOutput
current 0,5 A
032-1CD70
SM 032 - Analog output4 outputs 16BitVoltage -10
V…+10 V
022-1BF00
SM 022 - Digital output8 outputsOutput current 0,5 A
022-1BF50
SM 022 - Digital output8 Low-Side outputsOutput current
0,5 A
022-1HB10
SM 022 - Digital output2 relay outputsDC 30V /AC 230
VOutput current 3 A
022-1SD00
SM 022 - Digital output4 outputsSafetyOutput current
0,5 A
Analog Input Modules
70
Analog Output Modules
RS232/422/485 - and Other CPs
040-1BA00
CP 040 - Communication processorRS232 interface
040-1CA00
CP 040 - Communication processorRS422/485 interface
Counter Modules
050-1BA00
FM 050 - Counter module1 Counter 32 Bit (AB)DC 24 V
050-1BA10
FM 050 - Counter module1 Counter 32 Bit (AB)DC 5 V
050-1BB00
FM 050 - Counter module2 Counter 32 Bit (AB)DC 24V
031-1BB10
SM 031 - Analog input2 inputs 12BitCurrent 4…20 mA2
wire
050-1BB30
FM 050 - Counter module2 Counter 32 Bit (AB)DC 24 V
031-1BB30
SM 031 - Analog input2 inputs 12BitVoltage 0…10 V
050-1BB40
FM 050 - Counter module2 Channels 24 Bit (AB)DC 24 V
031-1BB40
SM 031 - Analog input2 inputs 12BitCurrent 0(4)…20mA
SSI Modules
031-1BB60
SM 031 - Analog input2 inputs 12BitCurrent
4…20mA2wire
031-1BB70
SM 031 - Analog input2 inputs 12BitVoltage -10 V…+10 V
031-1BB90
SM 031 - Analog input2 inputs
16BitThermocoupleVoltage -80mV…+80mV
031-1BD30
SM 031 - Analog input4 inputs 12BitVoltage 0…10 V
031-1BD40
SM 031 - Analog input4 inputs 12BitCurrent 0(4)…20mA
031-1BD70
SM 031 - Analog input4 inputs 12BitVoltage -10 V…+10 V
031-1BD80
SM 031 - Analog input4 inputs 16Bit0…3000 ohm
resistanceResistance measurement with 2-, 3- and 4-wires
031-1CB30
SM 031 - Analog input2 inputs 16BitCurrent 0(4)…10mA
031-1CB40
SM 031 - Analog input2 inputs 16BitCurrent 0(4)…20mA
Factory Automation Solution Product Selection Guide
050-1BS00
FM 050S - SSI moduleSSI EncoderMaster or slave
modeEncoder frequency 125 kHz…2 MHzµs time stamp
for encoder value
Fieldbus Slave Modules without I/Os
053-1CA00
IM 053CAN - CANopen slaveCANopen slave16Rx and 16
Tx PDOs2SDOsPDO-LinkingPDO-Mapping: fixMax. 64
peripheral modules
053-1DN00
IM 053DN - DeviceNet slaveDeviceNet slaveGroup 2 only
DevicePoll only DeviceBaud rate: 125, 250 and 500kbit/
sMax. 64 peripheral modules
053-1DP00
IM 053DP - Profibus-DP slavePROFIBUS-DP slave (DP-VO,
DP-V1)244 Byte input and 244 Byte output dataMax. 64
peripheral modules
053-1EC00
IM 053EC - EtherCAT slaveEtherCAT slaveRJ45 jack
100BaseTXMax. 64 peripheral modules
053-1IP00
IM 053IP - EtherNet/IP slaveEtherNet/IP slaveCIPMax. 64
peripheral modules
053-1MT00
IM 053MT - Modbus/TCP slaveModbus/TCP slaveI/O
configuration via fieldbusAdjustable I/O cycle (0,5…4 ms)
Max. 64 peripheral modules
053-1PN00
IM 053PN - PROFINET-IO-SlavePROFINET-IO slaveTransfer
rate 100Mbit/sMax. 64 peripheral modules
SLIO StarterKIT
800-1DK10
SLIO Starter-Kit 1 - IM053DPconsisting of: 1 x IM 053DP
- PROFIBUS-DP slave, 1 x CM 001 clamps module (4 x
DC 24V, 4 x DC 0V clamps), 1 x SM 021 digital input (DI
8xDC 24V), 1 x SM 021 digital input (DI 4xDC 24V), 1
xSM 022 digital output (DO 4xDC 24V, 0,5A), 1 x SM 031
analog input (AI 2x12Bit, U), 1 x SM 032 analog output
(AO 2x12Bit, U)1 x ready to fit profibus cable incl. 2 x PB
connector (972-0DP01+972-0DP10), 1 x profile rail, 1 x
SLIO USB-Stick (GSD-files, manuals, catalogue (German/
English), example program), 1 x transport case
35 mm Profile Rail
290-1AF00
35 mm profile railLength 2000 mm
290-1AF30
35 mm profile railLength 530 mm
Miscellaneous
000-0AA00
SLIO bus cover1 piece
000-0AB00
SLIO shield bus carrier10 pieces
000-0AC00
SLIO coding keys100 pieces
000-0DN00
SLIO DeviceNet jack for IMDeviceNet jack for IM0531DN00Contact surface: gold Pole number: 5 Contact
termination: spring force connection
Factory Automation Solution Product Selection Guide
71
Factory Automation Solution Product Selection Guide
Headquarters
NEXCOM International Co., Ltd.
15F, No.920, Chung-Cheng Rd., ZhongHe District, New Taipei City, 23586, Taiwan, R.O.C.
Tel: +886-2-8226-7786
Fax: +886-2-8226-7782
www.nexcom.com
America
China
Europe
USA
NEXCOM USA
NEXCOM China
United Kingdom
NEXCOM EUROPE
1F & 2F, Block A, No.16 Yonyou Software Park,
No.68 Beiqing Road, Haidian District,
Beijing, 100094, China
Tel: +86-10-5704-2680
Fax: +86-10-5704-2681
Email: sales@nexcom.cn
www.nexcom.cn
2883 Bayview Drive,
Fremont CA 94538, USA
Tel: +1-510-656-2248
Fax: +1-510-656-2158
Email: sales@nexcom.com
www.nexcom.com
Chengdu Office
Asia
Taiwan
NEXCOM Intelligent Systems
Taipei Office
13F, No.920, Chung-Cheng Rd.,
ZhongHe District,
New Taipei City, 23586, Taiwan, R.O.C.
Tel: +886-2-8226-7796
Fax: +886-2-8226-7792
Email: sales@nexcom.com.tw
www.nexcom.com.tw
NEXCOM Intelligent Systems
Taichung Office
16F, No.250, Sec. 2, Chongde Rd.,
Beitun Dist.,
Taichung City 406, R.O.C.
Tel: +886-4-2249-1179
Fax: +886-4-2249-1172
Email: sales@nexcom.com.tw
www.nexcom.com.tw
10 Vincent Avenue,
Crownhill Business Centre,
Milton Keynes, Buckinghamshire
MK8 0AB, United Kingdom
Tel: +44-1908-267121
Fax: +44-1908-262042
Email: sales.uk@nexcom.eu
www.nexcom.eu
9F, Shuxiangxie, Xuefu Garden,
No.12 Section 1, South Yihuan Rd.,
Chengdu, 610061, China
Tel: +86-28-8523-0186
Fax: +86-28-8523-0186
Email: sales@nexcom.cn
www.nexcom.cn
Italy
NEXCOM ITALIA S.r.l
Via Gaudenzio Ferrari 29,
21047 Saronno (VA), Italia
Tel: +39 02 9628 0333
Fax: +39 02 9286 9215
Email: nexcomitalia@nexcom.eu
www.nexcomitalia.it
Shanghai Office
Room 603/604, Huiyinmingzun Plaza Bldg. 1,
No.609 Yunlin East Rd.,
Shanghai, 200333, China
Tel: +86-21-5278-5868
Fax: +86-21-3251-6358
Email: sales@nexcom.cn
www.nexcom.cn
Shenzhen Office
Room1707, North Block, Pines Bldg.,
No.7 Tairan Rd., Futian Area,
Shenzhen, 518040, China
Tel: +86-755-8332 7203
Fax: +86-755-8332 7213
Email: sales@nexcom.cn
www.nexcom.cn
Japan
NEXCOM Japan
Wuhan Office
9F, Tamachi Hara Bldg.,
4-11-5, Shiba Minato-ku,
Tokyo, 108-0014, Japan
Tel: +81-3-5419-7830
Fax: +81-3-5419-7832
Email: sales@nexcom-jp.com
www.nexcom-jp.com
1-C1804/1805, Mingze Liwan, No.519
South Luoshi Rd., Hongshan District,
Wuhan, 430070, China
Tel: +86-27-8722-7400
Fax: +86-27-8722-7400
Email: sales@nexcom.cn
www.nexcom.cn
Please verify specifications before quoting. This guide is intended for reference purpose only.
All product specifications and information are subject to change without notice.
No part of this publication may be reproduced in any form or by any means without prior written permission of the publisher.
All brand and product names are registered trademarks of their respective companies.
©NEXCOM International Co., Ltd. 2014
72
602CATA006X00
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising