Laboratory Equipment Laboratory Equipment

Laboratory Equipment Laboratory Equipment
E
I NT
TIO
RNA
ED
NAL
ITIO
N
Laboratory
Equipment
for the Life
Sciences
Amplifiers,
Electrometers
—page 2
Stimulators,
Isolators
—page 23
Physiology
—page 34
Biosensing,
Nitric Oxide
—page 54
Cell & Tissue
Research
—page 76
Data
Acquisition
—page 102
Microdissection,
Microsurgery
—page 108
Laboratory
Supplies
—page 177
Glass, Holders,
Electrodes,
—page 191
Micromanipulators
—page 204
Microscopes,
Cameras
—page 220
Microforges,
Pullers
—page 234
Pumps,
Microinjection
—page 242
Index
World Precision
Instruments
—page 263
Ordering Information
Mail:
World Precision Instruments
175 Sarasota Center Boulevard
Sarasota, FL 34240-9258
Phone: 866-606-1974 (U.S. toll-free)
941-371-1003
Fax:
941-377-5428
Email:
[email protected]
International Orders
Please see page 272 for list of international offices and distributors.
Payment Options
Purchase Orders:
Pre-approved accounts, credit references required
Credit Cards:
Visa, Mastercard, American Express
Prepay Checks or Money Orders:
Payable to World Precision Instruments, mail to address above
Shipping Options
All orders are shipped UPS ground unless otherwise requested. Shipping and handling charges are prepaid and added to the invoice. Freight is
FOB Sarasota, FL.
Keep in touch ...
— visit WPI on-line!
In Europe, point your Web browser to www.wpi-europe.com
In the rest of the world, go to www.wpiinc.com
Amplifiers, Electrometers . . . . . . . . . 2
Intracellular l Extracellular l Transducer
Metal Microelectrodes l Voltage/Current Clamps.
Stimulators . . . . . . . . . . . . . . . . . . . . . . . 23
Digital Stimulators l Multi-Channel l Linear Stimulus Isolator
l High Current Isolator
Physiology . . . . . . . . . . . . . . . . . . . . . . . . 34
Blood Pressure Measurement l Stereotaxic Instruments
Animal Temperature Controller l Microprobe Thermometers
Biosensing . . . . . . . . . . . . . . . . . . . . . . . . 54
Nitric Oxide Detection l Ion Selective Electrodes l Oxygen
Detection l pH meters
Cell & Tissue . . . . . . . . . . . . . . . . . . . . . . 76
Epithelial Voltohmmeter l TEER Measurement l Ussing System
Perfusion System Glass Bottom Culture Dishes
Data Acquisition . . . . . . . . . . . . . . . . . 102
Data Acquisition Hardware & Software.
Microdissecting, Microsurgery . . . 108
Scissors l Tweezers l Ear Punches l Vessel Clips l Mouse
Surgery Kit l Electrosurgical Unit l Cautery Instruments
Laboratory Supplies . . . . . . . . . . . . . 177
Adhesives l Cables & Connectors l Metal Wire l Luers &
Fittings l Laboratory Bases, Rods, and Clamps
Glass, Holders, Electrodes . . . . . . . 191
Capillary Glass l Electrode Holders l Metal Microelectrodes
l MicroFil Non-metallic Syringe Needles
Micromanipulators, Stands . . . . . 204
Manual & Motorized Micropositioners l Magnetic Stands
l Tilting Base
Microscopes, Cameras . . . . . . . . . . . 220
Laboratory
Equipment
2009 ⁄2
1
Surgical, Stereo, and Inverted Microscopes l Cameras
l Illuminators l Heater Controller l Culture Dishes
Microforges, Pullers . . . . . . . . . . . . . 234
Pullers l Bevelers l Microforges
Pumps, Microinjection . . . . . . . . . . 242
Peristaltic, Syringe, and Pneumatic Pumps l Microprocessor
Controlled Injector
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 263
Ordering Information, Terms & Conditions . . . . . . . . . . . . . . . 272
Amplifier Selection Guide
Amplifier
AC/DC
Differential Headstage
EMG
EKG
Stimulation Isolated
Multichannel
Battery
Powered
Connectors
Page
2 mm pin
3
2 mm pin
4
t
2 mm pin
6
t
Mini Banana or 8-pin
DIN
12
t
Mini Banana
10
t
RJ-11
8
t
Mini Banana
9
AMPLIFIERS, ELECTROMETERS
Intracellular Bioamplifiers
FD223A
DC
Electro 705
DC
Duo773
DC
t
t
t
t
t
t
t
Extracellular Bioamplifiers
ISODAM8A
DC
t
opt
t
ISO80
AC
t
t
t
DAM50
AC/DC
t
DAM80
AC
t
t
t
t
t
t
t
t
Transducer Amplifiers
BRIDGE8
DC
t
t
TBM4MB
DC
t
t
8-pin DIN WPI
transducers
8-pin DIN WPI
transducers
13
5
Epithelial Voltage/Current Clamp Bio Amplifier
EVC4000
DC
t
t
Ussing 2 mm
14
DVC1000
DC
t
t
Ussing 2 mm
15
Specialty Measurement
LPF30 Low-Pass Filter
11
ABM Audible Baseline Monitor
11
Pressure Manometer
259
121 Window Discriminator
20
900A Intracellular Pressure Measurement
22
Omega-Tip-Z Electrode Volt-Ohmmeter
21
260 Dual Microiontophoresis Current Generator
11
Accessories
Cables & Connectors
186
Transducers for Physiological Measurement — LUME, PNEU, DSPL
16
Force Transducers
17
Ag/AgCl Half Cells
21
Metal Microelectrodes
18
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
2
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Dual Channel Differential Electrometer
l Electrode
resistance test circuitry l Probe test circuitry l Driven guard shield
The FD223a is a dual differential, high impedance amplifier/electrometer
designed specifically for electrochemical measurements using ion specific
(K+, Na+, C1-, etc.) or pH glass microelectrodes.
The instrument is very stable, drift free, and features a built in
provision for measuring and adjusting input leakage current. DC levels
may be independently adjusted for each probe channel.
The ability to locate the sensing probes directly at the measurement
site overcomes the noise introduced by the long cables usually needed
to bring the measured potential to the instrument. Signal-driven guards at
FD223a Specifications
Input Impedance
> 1015 Ω, shunted by 0.5 pF
Input Capacitance
1 pF, nominal
Leakage Current
75 fA max
Gain
1.000 ± 0.1%
Output Resistance
50 Ω
Input Swing Voltage ±10 V
Rise Time (10 to 90%)
5 µs, small signal
Noise (0.1 Hz to 10 kHz) <100 µV p-p, input shorted
Baseline Stability
±0.1 mV/day
Position Controls Range ±600 mV
Physical Dimensions
Case: 8.8 x 21.0 x 17.5 cm (H x W x D)
Probe: 12.7 x 65 mm (D x L), 1.8 m cable
Power
90-265 VAC, 50/60 Hz, 10 VA
Probe Handle
6.5 x 65 mm (D x L)
Shipping Weight
2.5 kg
Operating Conditions Equipment is intended to be operated in
a controlled laboratory environment. Temperature: 0-40 °C; altitude:
sea level to 2000 m; relative humidity: 0-95%.
the probe input maintains the specified high resistance and reduces the
stray capacitance of the probes.
Careful design, coupled with quality component selection, particularly
in the headstage, results in an excellent amplifier with low noise and
wide bandwidth. The FD223a will faithfully reproduce the measured
signal.
To reduce the noise and stray capacity even farther the probe housing
includes a signal driven guard. A portion of this inner driven shell is
exposed at the probe tip allowing a spring shield to be extended over the
electrode holder and microelectrode.
The amplifier features a probe test port that permits testing of the
electrode test feature and setting of the probe leakage current, (IG). A
standby mode is included and should be used when attaching glass
microelectrodes or electrode holders to the probe input. While in the
standby mode the voltage at the probe input is clamped near zero volts
thus protecting the input.
#2547 Driven Guard Shield
FD223A
FD223a Dual Channel Differential Electrometer
2 probes, driven guard shields and micropipette holder MEH1SF included
for all glass microelectrodes O.D. 1.0 mm, 1.2 mm, 1.5 mm, or 2.0 mm.
Optional Accessories
M3301L
Micromanipulator (specify left- or right-handed)
M-3
80° Tilting base
RC1T
Reference cell (Ag/AgCl)
2547
Driven guard shield for FD223AP Probe
MEH1SF
Microelectrode holder
FD223AP Replacement probe (includes calibration)
See cables and connectors, page 162.
See microelectrode holders, pages 174-177.
See capillary glass, page 168.
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
3
AMPLIFIERS, ELECTROMETERS
input impedance (10 15 Ω) l Differential (A-B) output l Low noise and wide bandwidth
l High
AMPLIFIERS, ELECTROMETERS
WPI’s Quietest Intracellular Amplifier!
Electro 705
BA
POWTTE RY
ERE
D
BLE
A
T
POR
A low noise high quality intracellular
amplifier well-suited for the student lab
Photo shows two units arranged for differential recording. Manipulators not included.
● Remote Headstage — Easily mounted in any manipulator, this
small probe, containing the first stage of amplification, includes a
microelectrode holder, which plugs directly into the probe input.
● Battery Power — Four 9V alkaline batteries (included) power the
Electro 705 for approximately 500 hours giving a super clean low noise
source of power making the Electro 705 the quietest amplifier available.
Batteries can be easily tested by the press of a button.
● Capacitance Compensation — Corrects for loss of rise time caused
by the presence of electrode capacity. Up to 50 pF of electrode shunt
capacity may be neutralized.
● Driven Guard Shield — Stray capacitance can be
further reduced by placing the driven guard shield
(included) over the microelectrode holder at the
input end of the probe.
ELECTRO 705 SPECIFICATIONS
Input Impedance
10 Ohms, shunted by 1 pF
Output Impedance
100 Ohms, both outputs
Gain
X1: ±0.1%
Input Voltage Range
±5 V
Risetime
15 µs, 10-90%
Noise Level
500 µV peak-to-peak*
12
Input Capacitance Compensation 0-50 pF
Gate Leakage Current
±10 pA, adjustable to zero
Electrode Resistance Test
1 mV/ M Ohms
DC Positioning
± 300 mV
Common Mode Rejection
>104 (in differential mode)
Power
Four 9V alkaline batteries, supplied
Dimensions
8.5 x 3.5 x 2.2 in. (22 x 9 x 6 cm)
Shipping Weight
5 lb (2.3 kg)
* Full band width, with 20 M Ohms source
● Tickler Circuit — A momentary oscillation that helps achieve cell
penetration.
● Electrode Resistance Test — The 705 provides a 1 nA electrode test
current. Electrode resistance is monitored at the 1X output as a voltage
(1 mV/M).
● Probe Test Port — Allows the convenience of testing the amplifier's
intrinsic noise and gain without cumbersome external test hookups. Gate
leakage current can also be adjusted with minimum effort.
● Baseline Position Control — Adds or subtracts up to 300 mV to the
headstage output, allowing artifact voltages such as liquid junction
potentials to be nulled prior to recording.
● Differential Output — Two Electro 705s can be connected in tandem
to create an optional differential amplifier probe system.
SYS-705
Electro 705 Electrometer
Probe, driven guard shield and micropipette holder MEH1SF included for
glass microelectrodes O.D. 1.0 mm, 1.2 mm, 1.5 mm, or 2.0 mm.
Optional Accessories
3468
Dual Rack Mount Kit
3469
Single Rack Mount Kit
M3301L
Micromanipulator (specify left- or right-handed)
M-3
80° Tilting base
RC1T
Reference cell (Ag/AgCl)
2541
Driven guard shield for 705PF Probe
MEH1SF
Microelectrode holder
705PF
Replacement probe (includes calibration)*
*Instrument must be returned to WPI for free calibration with new probe.
See cables and connectors, page 162.
See microelectrode holders, pages 174-177.
See capillary glass, page 168.
Reference
Koch, U. (2000) “Interdependence of spatial and temporal coding in the auditory midbrain.”
Journal of Neurophysiology 83, 4, 2300-2314
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
4
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
4-Channel Transducer Amplifier
TRANSDUCERS
PNEU01
Pressure Sensor, 1 psig
PNEU05
Pressure Sensor, 5 psig
PNEU15
Pressure Sensor, 15 psig
DSPL
Displacement Transducer
LUME
Photocell
FORT10-100Force Transducer, Dual Range (10 g and 100 g)
FORT10g
Force Transducer (10 g)
FORT25
Force Transducer (25 g)
FORT100
Force Transducer (100 g)
FORT250 Force Transducer (250 g)
FORT1000 Force Transducer (1000 g)
FORT5000 Force Transducer (5000 g)
3491
Probe Extension Cable
Caution: Extension cable may diminish signal-to-noise ratio.
AMPLIFIERS, ELECTROMETERS
Transbridge (TBM4M) is a
four-channel analog transducer
manifold, specifically designed
to amplify output voltage
signals from pressure, force,
displacement, and temperature
transducers as well as a wide
variety of other signal sources.
Analog output signals are
available from each channel
for input to a data acquisition
system for digital signal
processing in a computer.
Each channel contains a
regulated 10-volt power supply
(+5 and -5 volts with respect
to signal ground) to provide
DC power to transducers, and
a precision differential amplifier with selectable voltage amplification and
variable position adjustment control.
Transducers can be connected to Transbridge via any of the 8-pin
connectors on the front panel. Four spare 8-pin DIN plugs are
provided with each instrument to allow you to rewire cables of other
manufacturers’ transducers and connect them to Transbridge. Each
Transbridge channel may be used in either Full Bridge or the Half Bridge
mode independently. For transducer types other than resistive bridges,
such as active transistor circuits, magnetic, photocell or piezoelectric
devices, the instrument’s differential amplifiers may still be used
effectively for signal amplification in differential (full bridge) and singleended (half bridge) modes. See WPI’s complete line of TRANSDUCERS for
physiological measurements.
FORT100
PNEU
DSPL
Transducers not included. See WPI’s complete line of transducers for
physiological measurement.
TRANSBRIDGE SPECIFICATIONS
Channels 4
Voltage amplification
x1, x10, x100, x1000
Voltage offset adjustment
> ± 50 mV
Noise.4uV p-p (0.1 to 10Hz, G=100)
Linearity
+/-.001% of FSR G=1; +/-.01% of FSR, G-=1000
Output voltage swing
± 10 V
Maximum output current
2 mA
Input impedance, each input
1010 ohms
Transducer Excitation
10 V DC (±5 V) approx.
Bandwidth, small signal
1 MHz (x1), 80 KHz (x10), 10 KHz (x100), 1.0 KHz (x1000)
Dimensions
8.5 x 5.12 x 10 in. (21.6 x 13 x 25.44 cm)
Shipping weight
11 lb (5 kg)
SYS-TBM4M
Transbridge Transducer Amplifier
Specify line voltage
OPTIONAL ACCESSORIES
13024
Single Rack Mount Kit
13025
Dual Rack Mount Kit
500184 BNC-to-BNC cable, 10 ft
3161
8-pin DIN plug
3718
Package of 4, 8-pin DIN (startup kit)
See Transducers, pages 16-17
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
5
Duo 773 Dual Microprobe System
AMPLIFIERS, ELECTROMETERS
2-channel intracellular amplifier
For intracellular dual or differential studies, the Duo773 has separate negative capacity controls and built-in
active filtering that allows the precise balancing of time constants for artifact-free differential measurement.
Comes complete with two probe headstages, 1015 Ohms & 1011 Ohms probes to monitor signals from ion-specific
micro-electrodes as well as KCl-filled electrodes.
* Although injected currents are “constant,”
the maximum current in a given situation will
always be limited by the system compliance of
10 V.
**The 712P headstage may be used on either
A or B channels, however Current Injection
specifications do not apply when used on
channel A. The 715P headstage may not be used
on the B channel.
References
L. Pluja (2000) “Electrical and mechanical
effects of vasoactive intestinal peptide and
pituitary adenylate cyclase-activating peptide
in the rat colon involve different mechanisms.”
European Journal of Pharmacology 389, 217224.
G. X. Wang, X. B. Zhou, et al. (2000) “Effects of
mitoxantrone on excitation-contraction coupling
in guinea pig ventricular myocytes.” Journal of
Pharmacology and Experimental Therapeutics
293, 2, 501-508.
S. Tsuruoka (2000) “Acute effect of cadmiummetallothionein on glucose and amino acid
transport across the apical membrane of
the rabbit proximal tubule perfused in vitro.”
Journal of Pharmacology and Experimental
Therapeutics 292, 2, 769-777.
DUO 773 SPECIFICATIONS
HEADSTAGE (PROBE)
712P (red, port “B”)
715P (blue, port “A”)
1015Ω
ACTIVE PROBE INPUT IMPEDANCE
>1011Ω
GAIN
x1, x10
x1
OUTPUT RESISTANCE
100 Ω
100 Ω
OUTPUT VOLTAGE RANGE
±10 V
± 10V
MAXIMUM INPUT VOLTAGE
±15 V
±15 V
10-14 A
PROBE LEAKAGE CURRENT
5 X 10-12 A
DC POSITION ADJUST RANGE
± 300 mV
± 300 mV
ELECTRODE RESISTANCE TEST CURRENT
1 nA
1 pA, 1 nA selectable
INPUT CAPACITY COMPENSATION
+10 to -50 pF
0 to -10 pF
NOISE
Input shorted
<50 µV p-p 10kHz bandwidth
<50µV p-p 10kHz bandwidth
20 MΩ carbon resistor
<200 µV p-p 10kHz bandwidth <200µV p-p 10kHz bandwidth
RISE TIME
10-90% direct input small signal
1 µs, typical
10-90% through 20 MΩ (-C “on”)
25 µs, typical
CURRENT INJECTION
(712P only)**
Internal DC Current
± 50 nA low range, ± 500 nA high range
Externally commanded Current
± 500nA low range, ± 5 µA high range
External current command factor
20 mV/nA low range, 2 mV/nA high range
Current monitor
100 mV/nA low range, 10 mV/nA high range
Compliance
3V low range, 10V high range
Bridge balance
0-100 MΩ, 0-1000 MΩ
Bridge amplifier gain
x 10, x 50
LOW PASS FILTER
40 dB/decade, continuously variable 1-30 kHz
METER SECTION
Display
3.5-digit LED
Ranges
200 mV, 2000 mV, 20 V, 200 nA, 2000 nA
Accuracy and resolution
1 digit
DIMENSIONS
Instrument
17 x 5.25 x 10 in. (43 x 13 x 25 cm)
Probe
Diameter: 12 mm Length: 34 mm
POWER
95-135 V or 220-240 V, 50/60 Hz
15 lb (7 kg)
SHIPPING WEIGHT
CERTIFICATION
CE, CSA
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
6
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Independent Outputs — The Duo773 has an output for each probe
independent of gain filtering or balancing. In addition the Duo773 has
a 10x and a 50x output for easy integration to most data aquisition
programs.
Digital Meter — The Duo773 comes complete with a 3½-digit display
for monitoring injection current or the voltages for either probe (single
ended or differential).
SYS-773
Duo 773 Electrometer
Specify line voltage
Includes two probes with driven guard shields and eight
MEH1SF microelectrode holders for 1.0 mm, 1.2 mm, 1.5 mm,
or 2.0 mm glass electrodes.
OPTIONAL ACCESSORIES
712P
Replacement probe (includes calibration)*
715P
Replacement probe (includes calibration)*
*Instrument should be returned to WPI for free calibration with new probe.
2933
2547
15790
TW100F-4
TW150F-4
Rack Mount Kit, 51⁄4-in. high
Driven Guard Shield for 712P & 715P Probes
Replacement Probe Handle
Glass capillary with filament
Glass capillary with filament
See Dri-Ref, page 59.
See cables and connectors, page 162.
#2547 Driven Guard Shield
Optional Holders
for Intracellular
Amplifiers
Typical setup:
Duo773
AMPLIFIERS, ELECTROMETERS
Headstage — Two gold-plated, epoxy sealed miniature active probes can
be positioned directly to the measurement site. Microelectrode holders
containing an Ag/AgCl electrochemical half-cells plug directly into the
probes. Stray capacitance can be reduced by placing the included driven
guard shield over the microelectrode holder at the end of the probe.
Capacity Compensation — Channel A can compensate up to 10 pF of
electrode shunt capacity and Channel B can compensate up to 50 pF.
Tickler Circuit — Assists in cell penetration. The frequency and
amplitude of the oscillations may be varied for differences in membrane
thickness or cell size. The duration of tickle can be controlled either by
using the momentary switch, a foot switch, or by applying a signal to the
remote tickler input.
Active Filters — Low pass settings on a -40 dB/decade active filter
vary the cutoff from 1 to 30 kHz. Either probe or bridge outputs may be
selected for filtering.
Current Injection — Channel B can eject current through the
microelectrode by applying a command signal to the stimulus input
connector; the resulting output from the probe will then be a constant
current replica of the input signal. Two ranges of current delivery are
provided: 50 nA and 500 nA or by an external source. This source can
be useful for delivering hyperpolarizing currents to stabilize the cell
membrane potential and as a holding current for microiontophoresis.
Compliance Alarm — When the electrode voltage exceeds the probe
input maximum allowed voltage, an audible over-compliance alarm will
sound.
Bridge Balance — Subtracts the excess electrode voltage associated
with delivering current through the recording micropipette. Electrode
resistances up to 1000 MΩ can be balanced in two ranges. The balanced
signal is available from x10 or x50 front panel output connectors.
50x gain output
ME
Data
Acquisition
System
ME
ME
Recording Electrode
(with holder MEH1SF)
Drug or dye current
electrophoresis injection
H1
SF
H2
Micromanipulator
ME
SF
H3
W
SF
H3
ME
Micromanipulator
W
SF
H2
ME
ME
d)
plie
sup
(
SF
SF
H6
W
SF
H6
See Microelectrode Holders,
Inverted Microscope
page 198-201
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
7
DAM Series Bioamplifiers
A family of very low noise battery-operated amplifiers
Now wi
AMPLIFIERS, ELECTROMETERS
th E S D P
•
Gated or manual current generation for histological marking,
iontophoresis, or cell stimulation.
rotectio
n
!
•
A very low noise remote active headstage (DAM80 only) is
useful for very high impedance amplification utilizing
glass or metal electrodes.
DAM series amplifiers can be used as standalone
units on any tabletop, or use optional clampmounting hardware to locate them conveniently
within the work area. Alternatively, a pair of
amplifiers can be mounted into a standard
equipment rack with a rack mount kit (#3484 ).
A variety of hook up accessories are available to
configure your application.
Dam50—Basic Amplifier (optional
#5447 electrode adapter not included)
Optional probe #5489
for use with DAM50 also
in­cludes mi­cro­elec­trode
adapt­er #5469.
WPI’s DAM series amplifier’s are well known as a standard of the
industry for extracellular potential amplification. These battery
powered bio-amplifiers are designed with a compact chassis profile
that enables the user to locate the unit closer to the preparation
and thereby minimize long lead lengths which contribute to noise.
Each amplifier is equipped with selectable high and low filters, and
a position control to offset galvanic potentials which may develop
during recording. A choice of models offer additional features that are
useful for certain applications:
Application Examples
DAM50
#5447 Adapter
DAM50
GND
A
GND
#5371 Cable
B
Electrode Adapter
#5371 Cable
#3294 Grounding Clip
#5489 Probe
Light
Stimulation
#300102 electrode
extension, held by
micromanipulators
#2033 Adapter
A
B
#3578 Cable
Micromanipulator
Metal Microelectrodes
#5469 Metal
Microelectrode
Adapter
Central Ground
Metal Microelectrode
(i.e., TM33B01)
Petri Dish
Immobilized specimen
EP2
Ag/AgCl Half Cell
Ag/AgCl pellet
Central Ground
Extracellular recording
using metal microelectrode
ERG recording of fly eyes
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
8
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
DAM SERIES SPECIFICATIONS
Metal mi­cro­elec­
trode adapter
#5469 included.
DAM80, an AC amplifier only, features a very low noise headstage
probe which can be mounted in mi­cro­ma­n­ip­u­la­tors for up-close cortical
recording, for ex­tra­cel­lu­lar recording from high impedance glass or metal
mi­cro­elec­trodes. Also provides a gated cur­rent for tissue marking. Mi­cro­
elec­trode holder MEH3SB is recommended.
1012 Ω, common mode and differential
INPUT LEAKAGE CURRENT
50 pA (typical)
MAX. DC DIFFERENTIAL SIGNAL
± 2.5 V (DAM 50)
GAIN
AC: 100x, 1000x, 10000x
DC: 10x, 100x, 1000x (DAM50)
COMMON MODE REJECTION RATIO
100 dB @ 50/60 Hz
INPUT CAPACITANCE
20 pF
AC MODE NOISE
AC MODE NOISE
DC MODE NOISE (DAM50)
0.4 µV RMS (2 µV p-p) 0.1-100 Hz
2.6 µV RMS (10 µV p-p) 1 Hz-10 kH
7.5 µV RMS (30 µV p-p) 3-10 kHz
AMPLIFIERS, ELECTROMETERS
Dam80—
With low-noise
headstage DAM80P
INPUT IMPEDANCE
BANDWIDTH FILTER SETTINGS
AC Mode
AC Mode (DAM80)
DC Mode (DAM50)
Low frequency, 0.1, 1, 10, 300 Hz
High frequency, 0.1, 1, 3, 10 kHz
High frequency, 0.1, 1, 3, 10 kHz
OUTPUT CONNECTORS
BNC on DAM50; 3.5 mm MiniPhone connector on DAM80
OUTPUT VOLTAGE SWING
±8 V
OUTPUT IMPEDANCE
470 Ω
BATTERY TEST
Audible tone
CALIBRATOR SIGNAL
10 Hz square wave
POSITION
Approximately 250 mV
CURRENT SOURCE
DAM Series am­pli­fiers
— and most other
small WPI in­stru­ments
with similar metal
enclosures — may be
mount­ed on a post
near the ex­per­i­men­tal
site with Ringstand
Mounting Kit (#3485)
DAM80i Probe (included)
#5371 Cable
A
B
#13388 Adapter
#300102 electrode
extension, held by
micromanipulators
EMG
recording
of a rat
SYS-DAM50
SYS-DAM80
0 to ±50 µA, variable
EXTERNAL COMMAND
Input Voltage ±10 V commands
AC or DC current waveform
±50 µA max. amplitude @ 200 KΩ
BATTERIES
2 x 9V alkaline (included)
DIMENSIONS
#3294 Grounding Clip (included)
DAM80 or ISO-80
DAM80: DC Generator
Metal Microelectrodes
Ag/AgCl skin electrode pad
(#EL203)
DAM50
DAM80
8 x 4 x 1.75 in. (20.3 x 10.2 x 4.4 cm)
7 x 4 x 1.75 in. (17.8 x 10.2 x 4.4 cm)
SHIPPING WEIGHT
3.5 lb (1.6 kg)
FEATURE
Input Mode
Input configuration
Gain Range
High / Low Filters
Offset position control
Current Generator
Remote Active headstage
Output connection
Standard input connection*
Power supply
DAM50 DAM80
AC/DC
AC
differential/single ended
differential
100-10K (AC), 10-1K (DC)
100-10K (AC)
yes
yes
yes
yes
NoYes
NoYes
BNC
3.5 mm mini phone
unterminated wire
mini banana
(2) nine volt alkaline batteries
(2) nine volt alkaline batteries
*see optional accessories for additional alternatives
Bio-amplifier
Bio-amplifier with active probe (DAM80P)
OPTIONAL ACCESSORIES
DAM80P
Replacement Probe
3072
6 Replacement Modular Cables (DAM50)
3517
2 Optional Shielded Modular Cables (DAM50)
CBL102
3.5 mm Phone plug-to-BNC Cable
2851
BNC-to-BNC Cable
2033
Black Insulated Mini-Banana Plug
2034
Red Insulated Mini-Banana Plug
2035
Uninsulated Mini-Banana Plug
2101
9V Alkaline Battery, each (2 required)
3484
3485
5447
5469
5489
13388
5371
3578
300102
3414
Rack Mount Kit (for 2 DAM preamps)
Ringstand Mounting Kit
Electrode Adapter (DAM50)
Metal Microelectrode Adapter for DAM80
(mini-banana plug to 0.031 in. (0.79 mm) socket)
Adapter for Metal Microelectrode (DAM50)
Adapter, mini-banana plug to 2mm socket
Cable, Low Noise (2 mm pin to 2 mm pin)
Adapter Cable for Ag/AgCl pellets (2 mm pin)
Electrode Extension, 4-inch
9V NiMH Battery
Also see cables and connectors, metal mi­cro­elec­trodes,
carbon-filled mi­cropi­pettes.
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
9
AMPLIFIERS, ELECTROMETERS
Isolated
Differential
Amplifier
The improved ISO-80 provides low noise AC
coupled amplification and offers excellent
recording performance for monitoring
extracellular nerve action potentials in
vitro and in living animals. The ISO-80 is
provided with a remote headstage (1 m cable)
which incorporates an electrode impedance test
function and a constant current stimulator. The constant
current stimulator can be used for cell marking, stimulation or electrode
cleaning. Typical applications include measuring EMG, EEG, extracellular
and action potentials in vitro or in vivo. The ISO-80 system is DC isolated
from the subject ground and employs state of the art electro-magnetic
shielding for improved noise rejection. The amplifier employs both high
pass and low pass filtering with gain from 100 to 10,000. The lowest
low-pass setting is 5Hz and the upper passband is 10 kHz.
Included with the ISO-80 is a Startup Kit containing the following
accessories needed for basic metal electrode electrophysiology research:
CBL102 Cable, BNC-to-3.5mm plug, 6 ft (2m) (two)
5469 Adapter, mini-banana to 0.031 skt. (two)
13388 Adapter, mini-banana to 2mm skt. (two)
3294 Cable, ground clip to wire, 3 ft
2033 Mini-banana plug, black
2034 Mini-banana plug, red
2035 Mini-banana plug solderable turrent (two)
EP1 Ag/AgCl pellet (70 mm wire) 1mm diam x 2.5 mm long
M3301EH Electrode Holder, 14cm (two)
5470 0.031-inch jack on 12-inch wire (package of 4)
ISO-80 Specifications
Input Resistance
>1011 Ohms, Common Mode and differential
Input Leakage Current
50 picoamperes, max.
Amplification
×102, ×103, ×104
Common Mode Rejection Ratio 100 dB typ. @ 50/60 Hz
Equivalent Noise Signal Input 0.4 microvolts rms (0.1-100 Hz)
2.0 microvolts rms (1 Hz - 10 kHz)
Filter Settings
Low frequency
High frequency
5, 10, 100, 300 Hz
100 Hz, 1, 3, 10 kHz
Max. Output Voltage Swing
±8 volts
Electrode Impedance Range
100 kOhm - 10 MOhm @ 300 Hz
Stimulation Current
0 to ±20 micro amperes (constant current)
ISO-80
Isolated Bioamplifier w/ active probe (ISO80P)
Specify line voltage
OPTIONAL ACCESSORIES
ISO-80P
Replacement ISO-80 Probe
CBL102
3.5 mm phone plug-to-BNC cable
Maximum STIMULATION Voltage ±15 volts
Display
Maximum Electrode Voltage
±40 volts
31⁄2-digit LCD
BATTERY TEST
Low battery display
Power
Two 9-volt NiCad batteries & charger,
supplied
SHIPPING WEIGHT
4 lb (1.8 kg)
To ISO-80
To ISO-80
To ISO-80
ISO-80 probe
ISO-80 probe
red socket
#5469 electrode adapters*
micromanipulator
metal microelectrodes
specimen
#3294 grounding
wire & clip*
EP1* or similar
Ag/AgCl half-cell
Differential Application
#5470
electrode
adapter*
ISO-80 probe*
#5469 electrode adapter*
micromanipulator
metal microelectrode
micromanipulator
specimen
#3294 grounding
wire & clip*
Cut, strip, and
secure the wires in
#2033 connector.
red
socket
#3294 grounding
wire & clip*
#2033
connector*
EP1* or similar
Ag/AgCl half-cell
Single-Ended Application
micromanipulator
#2033 connector*
specimen
#M3301
electrode
holder*
metal
#5469 microelectrode
electrode
adapter*
EP1* or similar
Ag/AgCl half-cell
Optional Differential Application
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
10
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Dual Microiontophoresis Current Generator
SYS-260
Dual Microiontophoresis Current Generator
OPTIONAL ACCESSORIES
2933
Rack Mount Kit, 51⁄4-in. high
Capillary glass, see page 168.
The Dual Microiontophoresis Current Generator (Model 260) is an
electrically isolated, battery-operated instrument designed for the
electro-iontophoresis of dyes, drugs and charged substances from
micropipettes. Two identical battery operated current generators are
available. In ordinary use, the two current generators are operated in
parallel providing two distinct currents; one for preventing substances
in the micropipette from outward diffusion (the retain or hold current)
and the second for actively ejecting charged material. For pipettes with
submicron tips, a hold current may not be necessary if there is little
outward diffusion of pipette material. Model 260 is powered by two
9-volt alkaline batteries per side (four, in total); unique circuitry converts
the ±9 V to ±100 V without a transformer, yielding an exceedingly quiet
output.
Constant current, floating
OUTPUT RANGES
0 to ±100 nA
0 to ±1000 nA
OUTPUT POLARITY
Switch selected
COMPLIANCE (EXCURSION) VOLTAGE
100 V
METER
Analog meters, ±2% accuracy
OUTPUT RESISTANCE
>100 MΩ
NOISE
Less than 20 µV typical
DC to 10 kHz through 1 MΩ
independent of current delivery
LEAKAGE CURRENT TO GROUND
Less than 0.5 nA
OVERVOLTAGE ALARM
Front panel light
HOLD & EJECT SWITCH
Manual or by remote logic
POWER
Four 9 V alkaline batteries, included
DIMENSIONS
17 x 5.25 x 10 in.
(43 x 13 x 25 cm)
SHIPPING WEIGHT
13 lb (5.9 kg)
Audible Baseline Monitor
The ABM, a bat­tery-op­er­at­ed volt­age-con­
trolled os­cil­la­tor, lets you monitor po­ten­tial
au­di­bly. ABM is par­tic­u­lar­ly use­ful be­cause
it allows the user to es­ti­mate volt­age lev­
els when us­ing a mi­cro­scope or en­gaged in
oth­er tasks which do not al­low viewing an
os­cil­lo­scope or re­cord­er. An audible tone is
gen­er­at­ed with increasing pitch as the input
volt­age becomes in­creas­ing­ly positive.
SYS-ABM
AMPLIFIERS, ELECTROMETERS
260 SPECIFICATIONS
OUTPUT
ABM SPECIFICATIONS
FREQUENCY RANGE
Audible
INPUT RESISTANCE
1012 Ω
MAXIMUM APPLIED INPUT VOLTAGE
±10 V
POWER
Nine-volt alkaline battery, supplied
PITCH (VOLTAGE SENSITIVITY)
1 octave per 100 mV @ 1 kHz
DIMENSIONS
3 × 2.75 × 2 inches (8 × 7 × 4 cm)
SHIPPING WEIGHT
2 lb (0.9 kg)
Audible Baseline Monitor
Low-Pass Filter
A complete, ready-to-use instrument
LPF30 SPECIFICATIONS
INPUT IMPEDANCE
1 MΩ
GAIN
×1, ×10
BANDWIDTH FILTER
100 Hz to 30 kHz (2 pole R/C)
SHARPNESS
40 dB/decade
EQUIVALENT SHORTED INPUT NOISE AT x10 GAIN
Upper frequency band limit can be smoothly varied between 100 Hz and
30‑kHz using a single knob. WPI’s new low-pass filter is small, con­sumes
little power, and can be located almost anywhere in your workspace.
Features switch-selectable gain of ×1 or ×10 and low noise. An ideal tool
for filtering an analog signal before digital conversion by data acquisition
systems.
100 Hz Bandwidth
10 µVpp
30 kHz Bandwidth
30 µVpp
OUTPUT VOLTAGE RANGE
±8 V
MAX. INPUT VOLTAGE
±10 V
OUTPUT RESISTANCE
100 Ω
LOW BATTERY INDICATOR
LED lights when approximately 60 hours of battery life remain.
POWER
2 nine-volt alkaline batteries, supplied
BATTERY LIFE
About 400 hours
DIMENSIONS
5 × 3 × 2 inches (13 × 8 × 5 cm)
SHIPPING WEIGHT
2 lb (0.9 kg)
SYS-LPF30
Lo-Pass Filter
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
11
AMPLIFIERS, ELECTROMETERS
ISDB System lets you combine
Iso-DAM8A Modules Isolated Low Noise Bio-Amplifier
The ISO-DAM8A is a compact modular standard rack-mountable DC
amplifier system. Each channel is electrically isolated from the others
and from ground. No current can flow from the input terminals and
electrodes, thus, the instrument is intrinsically safe and cannot cause
any electrical stimulus or shock to the preparation, in addition ground
loop noise is minimized. Systems can be purchased with one, two,
three or up to eight preamplifier modules or mixed with Bridge8
transducer amplifier modules (see next page). The user can then select
an appropriate low pass filter setting, gain and offset on the channel
amplifier panel. A notch filter has been added to reduce line frequency
interference. An optional headstage preamplifier (10x gain) allows low
noise extracellular (DC) recording with Iso-DAM8A and adds greater
signal bandwidth than a shielded cable of the same length. The IsoDAM8A amplifier and headstage configuration is optimally suited for
use with our metal microelectrodes and can be easily configured for
many applications. Each amplifier channel has a coaxial (BNC) connector
located on the rear panel.
Optional
Recording probe
#74040 plugs into the
Iso-DAM8A input jacks.
ISO-DAM8A SPECIFICATIONS
EACH CHANNEL
INPUT IMPEDANCE
> 1012 Ohms
INPUT LEAKAGE CURRENT
10 pA (typical)
INPUT DC OFFSET
± 100 mV
GAIN
×10, ×100, ×1000, ×10,000
COMMON MODE REJECTION > 100 dB @ 50/60 Hz
EQUIVALENT NOISE SIGNAL INPUT
< 0.36 µV rms (1.8 µV p-p) 0.1-10 Hz, Gain>10
< 1 µV rms (5 µV P-P) 0.1-10 kHz
BANDWIDTH FILTER SETTINGS
High Filter (Low Pass) (kHz)
0.1, 0.5, 1, 3, 10
Low Filter (High Pass) (Hz)
0.1, 1, 10, 300
Notch Filter (Hz)
50, 60
OUTPUT VOLTAGE SWING ± 7.5 Volts
OUTPUT RESISTANCE
220 Ohms
SYSTEMS
ISDB-1
ISDB-2
ISDB-3
ISDB-4
ISDB-5
ISDB-6
ISDB-7
ISDB-8
Specify any combination of ISO-DAM8A or BRIDGE8 module (s)
Bio-amplifier System (1 channel) Specify ISO-DAM8A or BRIDGE8 module
Bio-amplifier System (2 channels) Specify ISO-DAM8A or BRIDGE8 modules
Bio-amplifier System (3 channels) Specify ISO-DAM8A or BRIDGE8 modules
Bio-amplifier System (4 channels) Specify ISO-DAM8A or BRIDGE8 modules
Bio-amplifier System (5 channels) Specify ISO-DAM8A or BRIDGE8 modules
Bio-amplifier System (6 channels) Specify ISO-DAM8A or BRIDGE8 modules
Bio-amplifier System (7 channels) Specify ISO-DAM8A or BRIDGE8 modules
Bio-amplifier System (8 channels) Specify ISO-DAM8A or BRIDGE8 modules
Each configuration above includes enclosure, power supply, and blank panels for empty slots.
SYSTEM
ENCLOSURE DIMENSIONS
7 × 17 × 9.2 in.
(18 × 43 × 23 cm)
SHIPPING WEIGHT 10 to 21 lb (4.5 to 9.5 kg)
Included with each ISO-DAM8A bioamplifier:
8-pin DIN connector with shielded, unterminated 5-ft cable.
Specify line voltage
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
12
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
modules in the same chassis
AMPLIFIERS, ELECTROMETERS
Bridge8 Modules
Low Noise Transducer Amplifier
Bridge8 is a modular, rack-mountable amplifier system based on
a similar architecture to the popular ISO-DAM8A amplifier system.
Bridge8 is specifically designed to be used as a signal conditioning
amplifier with strain gauges and other powered transducers. Bridge8
includes differential amplifiers featuring high input impedance, high
common mode rejection and low current leakage input terminals for
low noise operation. The Bridge8 also features a half bridge switch and
channel offset A wide variety of WPI transducers are available for force,
temperature, pressure and light measurements. The Bridge8 amplifier
is a clear choice where convenience and quality are required. Any
combination of ISO-DAM8 or Bridge8 modules may be combined in the
same enclosure. The ISO-DAM8A module is also available in this rack
configuration.
BRIDGE8 SPECIFICATIONS
Input impedance
> 1012 Ohms
Amplification
1, 10, 50, 100, 500, 1000 & Adjustable
Input leakage current
0.1 pA at 25 °C
Voltage offset adjustment
±50 mV (low); ±100 mV (high)
Amplifier output voltage
±4.4 volts (10 mA, max.)
Excitation Voltage
10 volts (±5.0 V) 100 mA, max.
Equivalent noise signal input
< 0.4 µV RMS (2 µV p-p) 0.1-10 Hz Gain >10 < 3 µV RMS (15 µV p-p) 0.1-100 Hz Gain >10
Low pass filter band (KHz)
0.03, 0.1, 0.3, 1, 5, 10, "Wide Band" R-C Butterworth 6 dB /octave
System enclosure dimensions
7 x 17 x 9.2 in.
Shipping weight
10 to 21 lb ( 4.5 to 9.5 kg )
Yes, Bridge8
and Iso-DAM8A modules can be
mixed in the same chassis!
Optional Accessories
74020
Iso-DAM8A Single Channel Module
74030
ISDB chassis and power supply
74040
Iso-DAM8A Active Headstage (separate)
74050
ISDB Blank panels
BRIDGE8
Bridge8 Transducer Amplifier Module
2933
ISDB Rack Mount Kit, 51/4-in. High
FORT10g
Force Transducer 10 g
FORT10-100 Force Transducer, Dual Range (10 & 100 g)
FORT25
Force Transducer 25 g
FORT100
Force Transducer 100 g
FORT250
Force Transducer 250 g
FORT1000 Force Transducer 1000 g
47610
Force Transducer 100 g Myobath only
PNEU01
Pressure Sensor, 1 PSIG (6.8 Kpa)
PNEU05
Pressure Sensor, 5 PSIG (34.4 Kpa)
PNEU15
Pressure Sensor, 15 PSIG (103.4 Kpa)
DSPL
Displacement Transducer (± 12mm)
LUME
Photocell (50mV / 5mW/cm2)
500184
BNC to BNC 10 foot cable
3161
8-pin DIN plug
3718
Package of 4, 8-pin DIN (startup kit)
3491
Extension Cable (DIN male, DIN female), 5 ft (1.5m)
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
13
EVC4000
EVC4000-4 (complete four-channel system)
AMPLIFIERS, ELECTROMETERS
Multi-Channel Voltage / Current Clamp
More channels and a wider range of voltage clamp commands than WPI’s classic
DVC-1000. The superior design of the cartridge electrodes makes 100-volt current
excursion unnecessary, so this safe, low-voltage system is easier to adjust and use.
EVC4000 employs the voltage clamp technique to monitor membrane
permeability as a function of membrane voltage or applied chemicals.
When combined with WPI’s patented EKC and EKV cartridge electrodes,
EVC4000 can efficiently voltage or current clamp up to four sample
membranes simultaneously using safe moderate voltages on the current
wire leads. The superior design of the cartridge electrodes makes 100volt current excursion unnecessary, so this safe, low-voltage system is
easier to adjust and use. Extremely stable and accurate, each module,
with its companion preamplifier, can operate independently in one of
three different modes: Voltage Clamp (VC), Current Clamp (CC), or Open
Circuit Potential (PD) measurement. EVC4000 can be controlled from
the front panel of the instrument or from computer generated commands
applied at the rear panel of the instrument. A feature unique to EVC4000
is an electronic potentiostat in the preamplifier box that maintains the
serosal electrode invariant potential at zero relative to system ground.
The preamplifier apparatus actively maintains one surface of the test
membrane close to ground potential under all operating conditions.
References
W. K. MacNaughton (2000) “Role of constitutive cyclooxygenase-2 in
prostaglandin-dependent secretion in mouse colon in vitro.” Journal of
Pharmacology and experimental Therapeutics 293, 2, 539-544
EVC4000-4
EVC4000-3
EVC4000-2
EVC4000-1
4-Channel Volt­age Clamp & preamps (shown above)
3-Channel Voltage Clamp & preamps
2-Channel Voltage Clamp & preamps
1-Channel Voltage Clamp & preamp
Specify line voltage
EVC4000 SPECIFICATIONS
PREAMPLIFIER
Input Resistance
1012 Ohms
Input Leakage Current
100 pA, max. Maximum Input Voltage
±15 volts
VOLTAGE CLAMP Panel Display
±200 mV ±0.1 mV
Clamp Voltage / External Input
100 mV per Volt Range of Voltage Electrodes
±32 Volts Max. Clamp Voltage
±100 mV Fluid Resistance Compensation
0 to 1000 Ohms
CURRENT CLAMP
Panel Display
±999 µA ±1 µA
Maximum Clamp Current
±1 milliampere Current Clamp Output
1 µA / mV
DISPLAY RESOLUTION Voltage
0.1 mV Current
1 µA
DIMENSIONS
18.25 x 7.2 x 9.6 in.
(46 x 18 x 24 cm)
SHIPPING WEIGHT (EVC4000-4)
26 lb (12 kg)
OPTIONAL ACCESSORIES
SYS-EVC4000 Replacement Voltage Clamp & EVC3 Preamplifier
EVC3
Replacement Preamplifier Module
EK1
Ussing Electrode Kit (2 voltage, 2 current)
EKV
Extra Ussing Voltage Electrode (each)
EKC
Extra Ussing Current Electrode (each)
2851
BNC Cable
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
14
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Two-Channel Voltage / Current Clamp
DVC-1000
AMPLIFIERS, ELECTROMETERS
The FIRST — and still
the most popular, with
thousands of users
around the world!
WPI’s DVC-1000 Two-Channel Voltage/Current Clamp is well-known
and widely used for studying epithelial tissues. Each DVC-1000 consists
of two separate clamp instruments, one for clamping a control tissue,
another for clamping a test tissue. This dual clamp technique lets you
monitor changes in membrane permeability as a function of voltage
or applied chemical agents. Either clamp unit operates in five modes.
Voltage clamp: Clamps the tissue voltage to a given level and displays
the current required to maintain that level. Amplify: Shows the potential difference between the two voltage electrodes. Current clamp:
Lets you deliver a constant current between the two current electrodes
while simultaneously monitoring voltage changes at the tissue. Timer:
Functions in either current clamp or voltage clamp experiments, letting
you cycle automatically between zero clamp and a preset clamp level.
Remote: Allows you to control clamp operation from a computer or
other logic level source. Small preamplifiers (included) which mount close
to the chamber let you connect to voltage and current electrodes without
long cables or agar bridges. DVC-1000 also features a unique ±100 V
power supply capable of delivering up to 1 mA of clamp current. Each
clamp lets you correct for input offset voltages and fluid resistance error.
SYS-DVC1000 Voltage/Current Clamp
Includes two DVC3 preamps and one DVC2 dummy membrane.
Specify line voltage
OPTIONAL ACCESSORIES
DVC2
Replacement Dummy Membrane
DVC3
Replacement Preamplifier
2935
Rack Mount Kit
EK1
Ussing Electrode Kit (2 voltage, 2 current)
EKC
Extra Ussing Current Electrode (red) (each)
EKV
Extra Ussing Voltage Electrode (blue) (each)
3485
Ringstand Mounting Kit (see page 9)
DVC-1000 SPECIFICATIONS
PROBES
INPUT IMPEDANCE
1012 Ω
LEAKAGE CURRENT
100 pA max
MAXIMUM INPUT VOLTAGE
10 V
VOLTAGE CLAMP
CLAMP VOLTAGE RANGE:
SET CLAMP POT
±100 mV
EXTERNAL COMMAND
±1 V
10 mV/mV
COMMAND FACTOR
MAX. CLAMP CURRENT
±1 mA
CURRENT CLAMP
CLAMP CURRENT RANGE:
SET CLAMP POT
±1 mA
±1 mA
EXTERNAL COMMAND
COMMAND FACTOR
1 mV/µA
±100 V
COMPLIANCE
INPUT OFFSET RANGE
±130 mV
FLUID RESISTANCE
COMPENSATION RANGE
0-1000 Ω
TEST CURRENT
10 µA to 180 µA adjustable
100 Ω
OUTPUT RESISTANCE
TIMER RANGE
500 ms to 500 s each side
LCD METER
TYPE
31⁄2 digits with Noiselok™
MAX. READING
2000 µA, 200 mV
POWER REQUIREMENTS
95-135 V or 220-240 V, 50/60 Hz
DIMENSIONS
17 x 8.75 x 9.5 in.
(43 x 22 x 24 cm)
SHIPPING WEIGHT
21 lb (9.5 kg)
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
15
AMPLIFIERS, ELECTROMETERS
Transducers for
Physiological
Measurement
These transducers are designed for
general use in data acquisition and
recording instruments and systems.
They are supplied with 5-ft cables
terminating in an 8-pin DIN connector
which readily plugs into Transbridge,
a 4­-channel analog signal conditioner
and Bridge8 .
PNEU
DSPL
LUME
LIGHT
When powered by +2 volts or more, LUME provides an output voltage
sig­nal pro­por­tion­al to inci­dent light over the visible to near infra red
spectrum. Contain­ing a min­ia­ture silicon pho­to­diode, the slender
stainless steel probe can be easily mounted to do a wide va­ri­ety of
useful jobs, such as mon­i­tor­ing trans­mit­ted, reflected or in­ter­rupt­ed light
beams. Optic fi­bers up to 2 mm di­am­e­ter may be in­sert­ed into the tip.
LUME
3491
Photocell
Probe Extension Cable
Caution: Extension cable may diminish signal-to-noise ratio.
LUME SPECIFICATIONS
POSITIVE SUPPLY VOLTAGE
+50 V, maximum
NEGATIVE SUPPLY VOLTAGE
-20 V, maximum
LIGHT VOLTAGE
50 mV minimum (per 5 mW/cm2 with 2870°K source)
DARK OUTPUT VOLTAGE
100 µV max. (+ 5 V supply)
ANGULAR FIELD OF VIEW
± 12 degrees off axis
SPECTRAL RANGE
400 - 1200 nm (peak at 860 nm)
5 mm diam. x 100 mm, PROBE
stainless steel
DISPLACEMENT
PRESSURE
DSPL smoothly converts mechanical displacement into a pro­por­tion­al
voltage with virtually infinite resolution and essentially zero frictional
drag. Based on the Hall effect, which uses a magnetic sensor.
PNEU transducers are ac­cu­rate dif­fer­en­tial pressure mea­sur­ing de­vic­es for
noncorrosive gas­es and gaseous fluids. Lin­ear and re­peat­able, with little
tem­per­a­ture drift, they con­vert hy­dro­stat­ic pressure levels to sta­ble and
proportional voltage sig­nals.
DSPL
3491
Displacement Transducer
Probe Extension Cable
Caution: Extension cable may diminish signal-to-noise ratio.
DSPL SPECIFICATIONS
DISPLACEMENT
OUTPUT VOLTAGE RANGE
OUTPUT RESISTANCE
NOISE
DRIFT
EXCITATION VOLTAGE
CURRENT DRAIN
LINEARITY
STYLUS WEIGHT
STYLUS STATIC FRICTION
24 mm (±12 mm)
16 mV /mm (± 10% with 10 V DC applied)
10 kΩ, differential
0.5 mV p/p (10 kHz bw), typical
0.05% Full Scale / change in °C
7 V DC minimum to 12 V DC maximum
10 mA typical, 20 mA, maximum
2%
2.5 grams
1.0 gram
PNEU01
Pressure Sensor, 1 psig
PNEU05
Pressure Sensor, 5 psig
PNEU15
Pressure Sensor, 15 psig
3491
Probe Extension Cable
Caution: Extension cable may diminish signal-to-noise ratio.
PNEU01, PNEU05, PNEU15 SPEC­I ­FI­CA­TIONS
WORKING PRESSURE
PNEU01
0-1 psi, differential (52 mm Hg)
PNEU05
0-5 psi, differential (260 mm Hg)
PNEU15
0-15 psi, differential (780 mm Hg)
MAXIMUM PRESSURE
3x Full Scale Pressure
TRANSDUCER SENSITIVITY
PNEU01: 18 mV, Full Scale (±10% at 10 V)
PNEU05: 60 mV, Full Scale (±10% at 10 V)
PNEU15: 90 mV, Full Scale (±10% at 10 V)
SUPPLY VOLTAGE
10 V (±5 V)
INPUT & OUTPUT RESISTANCE
4 kΩ, nominal
LINEARITY ERROR
0.5% maximum
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
16
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
FORT
5000
FORT
FORCE TRANSDUCERS
1000
250
FORT
100
FORT100
FORT250
FORT1000
FORT5000
Force
Force
Force
Force
Transducer
Transducer
Transducer
Transducer
(100 g)
(250 g)
(1000 g)
(5000 g)
FORT SPECIFICATIONS
FORT100
FORT250
FORT1000
FORCE RANGES, FULL SCALE
100 grams
250 grams
1000 grams
FORT5000
5000 grams
OUTPUT SENSITIVITY (± 10%)
7 µV/V/g
3 µV/V/g
0.84 µV/V/g
0.38 µV/V/g
INPUT & OUTPUT RESISTANCE
350 Ω
350 Ω
350 Ω
350 Ω
RESOLUTION
0.01% of full scale force
0.01% of full scale force
0.01% of full scale force
0.1% of full scale force
RESONANT FREQUENCY
300 Hz
300 Hz
300 Hz
60 Hz
LINEARITY ERROR
Less than 0.1% of full scale
Less than 0.1% of full scale
Less than 0.1% of full scale
Less than 0.1% of full scale
MAX. OPERATING VOLTAGE
10 V AC or DC
10 V AC or DC
10 V AC or DC
10 V AC or DC
MAXIMUM APPLIED FORCE
3× rated full scale force
3× rated full scale force
3× rated full scale force
3× rated full scale force
DRIFT
thermally compensated
thermally compensated
thermally compensated
thermally compensated
DIMENSIONS
0.3 inch diam × 4 in.
(7.6 mm diam × 10.2 mm)
0.3 inch diam × 4 in.
(7.6 mm diam × 10.2 mm)
0.3 inch diam × 4 in.
(7.6 mm diam × 10.2 mm)
0.3 inch diam × 4 in.
(7.6 mm diam × 10.2 mm)
WEIGHT (excluding cable)
0.3 oz (8 g)
0.3 oz (8 g)
0.3 oz (8 g)
0.3 oz (8 g)
10g & 25g Force
Transducers
Dual Range Force Transducer
FORT10g
FORT25
FORT10-100
Force Range, full scale
Force Transducer (10g)
Force Transducer (25g)
Force Transducer (10g and 100g)
FORT10g
FORT10-100
FORT25
0-10 grams
10 grams or 100 grams
0-25 grams
Output Sensitivity
10 mV/gm, nominal
75-100 mV/g, 7.5-10 mV/g
3 mV/gm, nominal
INPUT & OUTPUT ResistANCE
1500 Ω
N/A
1500 Ω
Resolution
< 1mg
0.03% of full scale force
< 2mg
Resonant Frequency
450 Hz
—
450 Hz
< 0.1% of full scale
<0.2% of full scale
10 V DC (-5V ~ +5V or 0 ~ 10V)
± 5V DC
10 V DC (-5V ~ +5V or 0 ~ 10V)
Linearity Error
Maximum Operating Voltage
<0.2% of full scale
MAXIMUM APPLIED FORCE
2× rated full scale force
1× rated full scale force
3× rated full scale force
DRIFT
<30 mg/hr
<30 mg/hr, thermally compensated
<50 mg/hr
DIMENSIONS
40 x 22 x 19 mm
40 x 22 x 19 mm
Handle 88 mm
1.125” x 3” x 0.6”
Handle 2.54” x 0.38” diam
100 gram
____________
100 gram
Weight
Handle 109 mm
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
17
AMPLIFIERS, ELECTROMETERS
FORT
These rigid-lever force transducers transform applied force into pro­por­
tion­al voltage. Using balanced strain gauges, FORT transducers produce
lin­ear output volt­age vs. applied force input with very little deflection.
To use, clamp the handle of the FORT transducer in a horizontal
position and apply the forces to be mea­sured to a rivet or hook mounted
in the hole at the end of the flat sensing leaf.
Metal Microelectrodes
AMPLIFIERS, ELECTROMETERS
Superior microelectrodes for outstanding extracellular recording — tungsten, iridium,
platinum-iridium, and Elgiloy®
Metal
EXPOSED TIP DIMENSIONS
(nominal)
Nominal
Impedance
Tungsten
Elgiloy
0.1 MegΩ
100 µ
120 µ
0.5 MegΩ
55 µ
66 µ
1.0 MegΩ
30 µ
36 µ
2.0 MegΩ
12 µ
15 µ
5.0 MegΩ
5 µ
6 µ
Gold-plated connector pin
Platinum
Iridium
60 µ
18 µ
10 µ
6 µ
3 µ
Parylene coating
Pure
Iridium
45 µ
14 µ
10 µ
5µ
2.5 µ
2-, 3-, 5-inch lengths
Kapton* tubing, indicated by “KT” in
the part number, extends from the
con­nec­tor to within 5 mm of the tip,
pro­vid­ing stiffness and additional
in­su­la­tion to the electrode shaft.
Kapton-clad elec­trodes are rec­om­
mend­ed when the electrode is to be
inserted through a cannula for extra
deep pen­e­tra­tion.
Exposed tip
25:1 taper
Parylene-C*
Gold-plated connector pins
Shrink tubing
Polyimide tubing
0.014" O.D. for 0.005" O.D. WE
Type A
Glue
Parylene-C
Insulation
Gold-plated connector pin
Polyimide tubing
0.016" O.D.
Tip separation
125 microns
5 mm
typical
3" and 5" total length
Note: Electrode diagrams not shown to scale.
Exposed
tips
Type B
Glue seal
3µ Parylene
5 mm
Polyimide tubing
Gold-plated connector pin
Glue
0.003" Iridium
or 0.005" Tungsten electrode,
Parylene-coated
29 gauge stainless steel tubing
Type C
29 gauge stainless steel tubing
0.003" IR
12"
3" total length
5 mm
typical
Type D
core conductor
Concentric Bipolar Electrodes
exposed stainless steel surface
stainless steel tubing
Excellent for shielded macro recording as well as evoked
potentials — especially well suited for bipolar stimulation
The tungsten electrode is sharpened to a point and is 75 microns in
diameter. The outer stainless steel conductor is insulated with Polyimide
tubing to within 0.2 mm of the end of the stainless steel tube. Also
available without the outer Polyimide insulation.
Heat Treated Tip
(above) is ideal for
penetrating tough
membranes (not
recommended
for chronic
implantation). This process is performed using a microforge in which the
heating element is positioned in close proximity to the tip in order to melt the
Parylene-C distal to the exposed metal. It provides a smooth transition and
produces better adherence of the Parylene-C to the metal.
Polyimide tubing
x
shrink tubing
Y <0.2 mm
Y
L=3" or 5" (2" for PTM)
Insulated metal conductor with exposed concentric surface
.389"
(9.88 mm)
.031"
(0.79 mm)
pin #5482
.404"
(10.26 mm)
socket #5483
To have your electrodes heat treated, just add the suffix “H” to any of the
“KT” numbers on the facing page. Cost of the treatment is $10 per package of
10 electrodes ($20 per package for Type B).
Gold-plated pins (#5482)
and sockets (#5483) may be
attached to 24-, 26-, or 28gauge wire.
0.51 mm ID
#5470 (mount in M3301EH
holder, see page 200)
* Parylene is a trade mark of Union Carbide. Kapton is a trade mark of DuPont. Elgiloy is a trade
mark of Elgiloy Ltd.
ACCESSORIES
300102 Micromanipulator holder, 4 in., 2mm to 0.031 socket
5468
2 mm receptacle to 0.031-inch jack (for Omega-TipZ)
5469
Adapts mini banana plug (DAM80) to 0.031-inch receptacle (metal microelectrode)
5470
0.031-inch jack, 28 ga. wire, 12 inch (pkg of 4)
5482*
Pins, 0.031-inch, gold-plated (pkg of 50)
5483*
Sockets, 0.031-inch gold-plated (pkg of 50)
*Gold-plated pins (#5482) and sockets (#5483) may be attached to 24-, 26-, or
28-gauge wire.
Electrode
plugged into
adapter #5470
#5468
#300102
#5469
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
18
UK: Tel: 01438-880025 • [email protected]
W
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Introductory Assortments
Each of these assortment kits includes electrodes with different impedance within each style. Use an assortment kit to determine which electrode you need
for your experiment. Ten electrodes per box, no mixing.
Item
TM31/33Axx
TM31/33AxxKT
TM33BxxKT
TST33AxKT
Contains the following electrode impedances by quantity (pkg of 10)
TM33A05 (2), TM33A10 (3), TM33A20 (3), TM31A50 (2)
TM33A05KT (2), TM33A10KT (3), TM33A20KT (3), TM31A50KT (2)
TM33B01KT (3), TM33B05KT (2), TM33B10KT (3), TM33B20KT (2)
TST33A05KT (3), TST33A10KT (4), TST33A20KT (3)
Price
178
US$
239
US$
239
US$
497
US$
Item
Metal Core Length
Imp
TM33CCNON
Tungsten
3” (76)
10-15K
TM33CCINS
Tungsten
3” (76)
10-15K
TM53CCINS
Tungsten
5” (127)
10-15K
PTM23CC001NON
Pt/Ir
2” (51)
10K
PTM3CC02INS
Pt/Ir NS fine
3” (76)
200K
*All have a stainless steel outer shaft
Probe Outer
Diameter (total)
0.013” uninsulated (325 µm)
0.016” insulated (400 µm)
0.018” insulated (450 µm)
0.020” uninsulated (525 µm)
0.013” insulated (325 µm)
Tip
Core diam.
Y dim. X dim. w/ polyimide
Price
Diam.
(pkg of 5)
US$
265
3-4 µ
.003” (76 µm)
0.4 mm
.005” (127 µm)
US$
3-4 µ
003” (76 µm)
0.4 mm
.005” (127 µm)
288
US$
3-4 µ
005” (127 µm)
0.4 mm
.008” (203 µm)
322
US$
3-4 µ
0.01” (254 µm)
0.4 mm
.014” (356 µm)
380
US$
2-4 µ
0.002” (50.8 µm)
.25 mm
.004” (114 µm)
403
Selection Guide for Metal Electrodes
Item
Length
Insul.
Shaft
Nominal Tip Diam. Typical Use
Thick.
Diam.
Impedance
(± 20%)
Package of 10
Platinum Iridium — Profile A
PTM23B10
51 mm
3 µ
0.254 mm
1.0 MΩ
1-2 µ
Single and multi unit recording, stimulation, Chronic implants
Tungsten — Profile A
TM31A10
76 mm
1 µ
0.127 mm
1.0 MΩ
1 µ
TM31A10KT
76 mm
1 µ
0.216 mm
1.0 MΩ
1 µ
TM31A20
76 mm
1 µ
0.127 mm
2.0 MΩ
1 µ
TM31C05
76 mm
1 µ
0.085 mm
0.5 MΩ
1 µ
TM33A05
76 mm
3 µ
0.127 mm
0.5 MΩ
1 µ
TM33A10
76 mm
3 µ
0.127 mm
1.0 MΩ
1 µ
TM33A10KT
76 mm
3 µ
0.216 mm
1.0 MΩ
1 µ
TM33A20
76 mm
3 µ
0.127 mm
2.0 MΩ
1 µ
TM33B01
76 mm
3 µ
0.254 mm
0.1 MΩ
1-2 µ
TM33B01KT
76 mm
3 µ
0.356 mm
0.1 MΩ
1-2 µ
TM33B05
76 mm
3 µ
0.254 mm
0.5 MΩ
1-2 µ
TM33B05KT
76 mm
3 µ
0.356 mm
0.5 MΩ
1-2 µ
TM33B10
76 mm
3 µ
0.254 mm
1.0 MΩ
1-2 µ
TM33B10KT
76 mm
3 µ
0.356 mm
1.0 MΩ
1-2 µ
TM33B20
76 mm
3 µ
0.254 mm
2.0 MΩ
1-2 µ
TM33C05
76 mm
1 µ
0.085 mm
0.5 MΩ
1µ
76 mm
1 µ
0.085 mm
1.0 MΩ
1µ
TM33C10
Package of 10
Multi unit and single unit recording and microstimulation
Multi unit and single unit recording and microstimulation
Multi unit and single unit recording and microstimulation
Recording from small tightly packed cells
Multi unit and single unit recording and microstimulation
Multi unit and single unit recording and microstimulation
Multi unit and single unit recording and microstimulation
Multi unit and single unit recording and microstimulation
Single and multi unit recording and microstimulation
Single and multi unit recording and microstimulation
Single and multi unit recording and microstimulation
Single and multi unit recording and microstimulation
Single and multi unit recording and microstimulation
Single and multi unit recording and microstimulation
Single and multi unit recording and microstimulation
Single unit and stim / chronic use
Single unit and stim / chronic use
Elgiloy®/Stainless
SSM33A05
76
SSM33A20KT 76
SSM33A70
76
SSM33A120
76
Package of 10
Recording and Stimulating
Recording and Stimulating
Recording and Stimulating
Recording and Stimulating
Profile A
mm
3 µ
0.229 mm
0.5 MΩ
1-2
mm
3 µ
0.356 mm
1.0 MΩ
1-2
mm
3 µ
0.229 mm
7.0 MΩ
1-2
mm
3 µ
0.229 mm
12.0 MΩ
1-2
µ
µ
µ
µ
(Prussian
(Prussian
(Prussian
(Prussian
blue
blue
blue
blue
staining)
staining)
staining)
staining)
Tungsten
Profile B
TST33A05KT 76 mm
3 µ
0.356 mm
0.5 MΩ
1µ
TST33A10KT 76 mm
3 µ
0.356 mm
1.0 MΩ
1µ
3 µ
0.356 mm
2.0 MΩ
1µ
TST33A20KT 76 mm
TST33C05KT 76 mm
3 µ
0.216 mm
0.5 MΩ
1µ
TST53A10KT 127 mm
3 µ
0.356 mm
1.0 MΩ
1-2 µ
Package of 10
Stereotrode / Bipolar,
Stereotrode / Bipolar,
Stereotrode / Bipolar,
Stereotrode / Bipolar,
Stereotrode / Bipolar,
Pure Iridium Profile C
IRM23E01KT 50 mm
3 µ
0.180 mm
0.1 MΩ
2-3
IRM23E10
50 mm
3 µ
0.106 mm
1.0 MΩ
1-2
IRM23E15
50 mm
3 µ
0.106 mm
1.5 MΩ
1-2
IRM23E20KT 50 mm
3 µ
0.180 mm
2.0 MΩ
1-2
IRM23E25
50 mm
3 µ
0.106 mm
2.5 MΩ
1-2
IRM23E25KT 50 mm
3 µ
0.180 mm
2.5 MΩ
1-2
IRM23E30
50 mm
3 µ
0.106 mm
3.0 MΩ
1-2
IRM23E30KT 50 mm
3 µ
0.180 mm
3.0 MΩ
1-2
IRM23E50KT 50 mm
3 µ
0.180 mm
5.0 MΩ
1-2
Package of 5
Multiunit & ERP recording & stimulation
Single and multiunit recording and stimulation
Single and multiunit recording and stimulation
Greater selectivity & microstimulation
Greater selectivity - small cells
Greater selectivity - small cells
Greater selectivity - small cells
Greater selectivity - small cells
Greater selectivity - small cells
µ
µ
µ
µ
µ
µ
µ
µ
µ
Platinum Iridium Profile D
PTM123B10KT 305 mm
3 µ
0.61 mm
1.0 MΩ
1-2 µ
PTM123B20KT 305 mm
3 µ
0.61 mm
2.0 MΩ
1-2 µ
Package of 5
Deep brain studies
Deep brain studies
Tungsten
Profile D
TM123A10KT 305mm
3 µ
0.406 mm
1.0 MΩ
1µ
Package of 5
Deep brain studies
differential
differential
differential
differential
differential
measurements
measurements
measurements
meas. — extra fine (75 µm separation)
measurements
Price
382
US$
185
252
185
US$
185
US$
178
US$
178
US$
239
US$
178
US$
178
US$
239
US$
178
US$
239
US$
178
US$
239
US$
178
US$
185
US$
185
US$
US$
US$
161
240
US$
185
US$
185
US$
US$
499
499
US$
499
US$
516
US$
575
US$
US$
522
468
US$
468
US$
522
US$
468
US$
522
US$
468
US$
522
US$
522
US$
US$
490
490
US$
US$
427
US$
Additional metal microelectrodes
available on website
Ordering:
www.wpiinc.com
Add the B suffix where blunt electrodes are desired. (For example, an IRM123A10KT ordered as a blunt will be IRM123A10KTB.)
Eligoy Steel *Cobalt/chromium/nickel alloy. The KT suffix refers to Kapton™ cladding.
All Metal Microelectrodes are available in custom lengths, blunt or heat treaded (extra charge).
Add the H suffix where heat treated electrodes are desired. (For example, an IRM123A10KT ordered as with heat treatment will be IRM123A10KTH .)
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
19
AMPLIFIERS, ELECTROMETERS
Concentric Electrodes*
AMPLIFIERS, ELECTROMETERS
Window Discriminator
● Monitor signals and discriminator levels simultaneously at the multiplex output
● Window height independent of lower discriminator level setting
● Logic level output pulses, TTL compatible
● Output pulses indicated by LED display
This amplitude discriminator is designed for audio and sub-audio signals
such as extracellular nerve action potentials. For every waveform peak
that appears “within” the window aperture set by the user, a pulse is
generated at the “Within Window” output. Signals that exceed the upper
level of the window produce a pulse at the “Above Window” output. A
visual indication of the pulses is provided at each output by the LED
display. Both the input signal and the window aperture settings are
visible at the multiplex port as shown below in the upper trace. By
viewing the input signal as well as the “window” discriminator levels at
the multiplex port provides a convenient visualization and ease in setting
up an experiment. Model 121’s multiplex circuitry samples input signals
and window levels on a 70%/30% basis respectively, minimizing loss of
signal information. The Lower Level control sets the lower discrimination
level, and the Window Aperture control sets the upper window level with
respect to the lower level setting. This means that changing the lower
level setting has no effect on the window aperture except to displace the
window up or down. It is impossible to set the lower level higher than
the upper level, a feature unique to Model 121. The pulses from either
MULTIPLEX OUTPUTS
output (Within Window or Above Window) are generated by the falling
edge of the analyzed signal as it crosses the preset levels. Because the
logic circuit is not time dependent, Model 121 can be used to analyze
signals of any duration. Ten-turn controls with dial indicators allow
precise setting and direct reading of the window levels.
Enclosure includes a tilt stand for bench operation. Rack mounting
hardware is optional.
WINDOW DISCRIMINATOR SPECIFICATIONS
Input Impedance
100 K Ohms
Maximum frequency
Approximately 10KHz
Minimum pulse width
80 µs
Input polarity
Positive or negative switchable
Maximum input Voltage
Up to 50 V (peak-to-peak) in three ranges: 0-0.5 V, 0-5 V, 0-50 V
Window range Upper, lower levels
Up to 10 V in three ranges: 0-0.1 V, 0-1 V, and 0-10 V
Discriminator resolution
±2%
Within & above window Output
Rectangular pulses, approx. 3.0 V
amplitude (TTL compatible), adjustable
pulse width from 0.1 to 1.0ms. Output
impedance less than 500 Ohms. LED
indicates presence of output pulse.
Cycle length nominally 37 µs.
Multiplex Output
Signal on time: 26 µs (70%) Levels on time: 11 µs (30%) Output impedance less than 100 Ω
Upper Level
Lower Level
Input Signal
Window Output
Above Window
Output
The diagram above shows the multiplex signal output with the window
parameters displayed on the input signal. A “within” pulse occurs at the
lower level crossing point after the input signal is measured within the
boundaries of the settings and an “above” pulse is generated for those
signals going above the upper level setting.
0.1% of full scale (selected range)
Discriminator accuracy
Power requirements
~120/240V, 50/60Hz, 12VA
Dimensions
17 x 3.5 x 9.5 in. (43.2 x 8.9 x 24 cm)
Shipping weight
11 lb (5 kg)
SYS-121
2932
2851
500184
500257
500258
500259
Window Discriminator
Rack Mount Kit, 3.5-in. High
BNC-to-BNC cable, 5’2”
BNC-to-BNC cable, 10 ft
BNC-to-BNC cable, 6 inch 15 cm
BNC-to-BNC cable, 12 inch 30 cm
BNC-to-BNC cable, 18 inch 46 cm
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
20
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Ωmega-Tip-Z
™
Omega-Tip-Z was created especially for measuring impedance in
etched tung­sten, platinum-iridium* and steel microelectrodes, as well as
electrolyte-filled micropipettes. The meter’s AC impedance-measuring
circuit is unaffected by electrode offset or tip junction potentials. The
gold-plated miniature probe lets you conveniently monitor microelectrode impedance in electrolytes, and an electrode tip cleaning feature
lets you remove buildup quickly. Omega-Tip-Z can also measure DC
electrode tip potentials up to 2000 millivolts. The instrument operates for
hundreds of hours without battery failure.
NOTE: Metal microelectrodes which have been precalibrated at 1 kHz
should be baselined for use with Omega-Tip-Z.
*See Metal Microelectrodes, page 18.
OMEGA-TIP-Z SPECIFICATIONS
SYS-OMEGAZ
711P
5468
Ωmega-Tip-Z with Probe & Holder
Replacement Probe
Adapter to connect metal microelectrodes to
probe, 2 mm socket to .031 in. receptacle OPTIONAL ACCESSORIES
NOVA
Novaflex Fiber Optic Illuminator (115v, 60HZ)
NOVA-Z
Novaflex Fiber Optic Illuminator (230v, 80HZ)
500186
Bifurcated Light Guide with lenses
NOVA-186
Novaflex Illuminator and bifurcated light guide
EP05
0.8 mm dia.
2 cm long
Ag Wire 40 mm long
EP1
Ag Wire 40 mm long
EP4
EP2
1 mm dia.
3 mm long
4 mm dia.
1 mm thick
2 mm dia.
4 mm long
Ag Wire 70 mm long
Ag Wire 5 cm long
EP8
8 mm dia.
1 mm thick
Ag wire 12 mm long
1012Ω, typical
1 pA, typical
±2V
0 to ±2000 mV DC
± 0.1% of reading, ± 1 least significant digit
1 mV (3.5 digits)
0 to 20 MΩ @ 500 Hz(metal)
0 to 200 MΩ or 0 to 2000 MΩ @ 12.5 Hz (glass)
10 nA and 1 nA (glass); 10 nA (metal)
10 KΩ
± 20%
1.2 cm diameter × 3.2 cm long
4.7 mm diameter × 8.9 cm long
1.5 m
7 × 4 × 2 in. (18 × 10 × 5 cm)
6 AA 1.5-volt alkaline cells, supplied
4 lb (1.8 kg)
Ag/AgCl Half-Cells
EP08
0.5 mm dia.
2 cm long
INPUT RESISTANCE
INPUT LEAKAGE CURRENT
MAX. INPUT VOLTAGE SWING
VOLTMETER
Range
Accuracy
Resolution
OHMMETER
Range
Measurement Resolution
Accuracy
PROBE
PROBE HANDLE
PROBE CABLE
MAIN HOUSING
POWER
SHIPPING WEIGHT
Ag wire 12 mm long
EP12
12 mm dia.
1 mm thick
New, improved sintered pellets with lower resistance and high strength.
Stable and well balanced in the presence of current, these small and
inexpensive half-cells are easy to work with as bath electrodes.
EP05
EP08
EP1
EP2
EP4
EP8
EP12
3578
Ag/AgCl Electrode 0.5 mm diam x 20 mm
Ag/AgCl Electrode 0.8 mm diam x 20 mm
Ag/AgCl Electrode 1.0 mm diam x 2.5 mm
Ag/AgCl Electrode 2.0 mm diam x 4 mm
Ag/AgCl Electrode 4.0 mm diam x 1 mm
Ag/AgCl Electrode 8.0 mm diam x 1 mm
Ag/AgCl Electrode 12.0 mm diam x 1 mm
Adapter Cable for Ag/AgCl Pellets
Ag wire 12 mm long
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
21
AMPLIFIERS, ELECTROMETERS
Millivolt and megohm meter measures impedance
of metal or glass capillary microelectrodes
AMPLIFIERS, ELECTROMETERS
Measure hydrostatic pressure
in small vessels and oocytes
Model 900A Micropressure System
● Simultaneously measures elec­tric potential and pres­sure
● Preset internal mi­cro­elec­trode pressure
● Air-filled system — no de­bub­bling
Model 900A is designed to measure hydrostatic
pres­sure in small vessels and cells. Pressure ranges
of -200 to +400 mm Hg can be measured with
stability and accuracy. The system’s sensing element
is an electrolyte-filled glass microelectrode with a tip
di­am­e­ter range of 2 to 5 microns.
Pressures of electrolyte solutions are measured
by maintaining a salt concentration gradient at the
tip of the sensing electrode in dynamic equilibrium
by applying an equal air pressure inside the mi­cro­
elec­trode. The pressure reading appears on the front
pan­el display and via the BNC recorder output.
Because the piezoelectric pressure controller uses
external pressure and vacuum sources, pressures
low­er than -200 to greater than +400 mm Hg can
be quickly and accurately measured at the mi­cro­
elec­trode tip.
The open pressure chamber is almost immune
to vibrations and movements and, unless they are
ex­treme­ly large, the open system is unaffected
by leaks. The pressure controller is contained in
a small, light­weight enclosure that can easily be
mounted near the micropipette to help reduce dead
space. It in­cludes an amplifier, a piezoelectric valve
and a pres­sure transducer. The user supplies fluidfilled mi­cro­elec­trodes, +500 mm Hg pressure source
and a -300 mm Hg vacuum source.
Measuring electric potential and pressure si­mul­ta­
neous­ly lets you use potential recording as an ad­di­
tion­al cue for locating the electrode where vis­i­bil­i­ty
is limited, or correlate pressure and potential when
this is meaningful.
The unique “Set Pressure” mode lets you preset
the internal pressure of the microelectrode — select
a positive pressure for flushing the tip, or a negative
pressure for pulling solution into the tip. By dis­con­
nect­ing the microelectrode holder and attaching the
tubing to a manometer, you can check the cal­i­bra­
tion against a standard.
A built-in alarm sounds to indicate maximum
pres­sure. The alarm also sounds when the tip is
blocked or electrical continuity is bro­ken (e.g., the
mi­cro­elec­trode comes out of the so­lu­tion, too little
filling so­lu­tion to cover the Ag/AgCl pellet, dis­con­
nect­ed ground reference, etc.).
The piezoelectric pres­sure controller regulates
in­ter­nal pipette pressure by con­trol­ling air flow into
and out of a small pressure cham­ber. A vacuum
source is con­nect­ed on the outlet side of the cham­
ber, and a pi­ezo­elec­tric valve meters air en­ter­ing
the pres­sur­ized cham­ber. The re­sid­u­al vol­ume of
the pres­sure cham­ber includes the mi­cropi­pette, the
con­nect­ing tub­ing and the pres­sure trans­duc­er on
the outlet side of the piezo­elec­tric valve. The 900A
ac­cu­rate­ly con­trols and ad­justs the pres­sure in the
cham­ber to match pres­sures ap­plied ex­ter­nal­ly to
the mi­cro­elec­trode tip.
The response time of the piezoelectric valve is
0.5 ms from fully closed to fully open. Overall sys­
tem response time de­pends large­ly on the amount
of residual vol­ume in the tub­ing. When this volume
is small, the system re­sponds very rap­id­ly (typically
10 mil­li­sec­onds).
The lightweight pres­sure controller pod may be
mounted close to the mi­cro­elec­trode using smallbore tubing, to min­i­mize system dead space.
Microelectrode holders MEH6RF and MEH6SF
for 1.0 mm O.D. capillary glass included. (1.2, 1.5
and 2.0 mm also available — please specify when
or­dering.)
SYS-900A
Micropressure System
System price includes a one-day technical training session at WPI in Sarasota, Florida.
Specify line voltage
OPTIONAL ACCESSORIES
900AP
Replacement Probe
CAL900A
Pressure Calibration Chamber
3491
Probe Extension Cable
2933
Rack Mount Kit
5332
Replacement Liquid Trap
MEH6RF
Micropipette Holder (1.0, 1.2, 1.5 or 2.0 mm — Specify O.D.)
MEH6SF
Micropipette Holder (1.0, 1.2, 1.5 or 2.0 mm — Specify O.D.)
TIPTW900A Prepulled Micropipette for 900A (1 mm thin-wall, 2 µTip) (pkg of 10)
900APP
Replacement Pressure Pod
SYS-PM015D Pressure Manometer (15 psi)
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
22
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Stimulators, Isolators
Feature
Input
Output
Biphasic,
Digital Analog
Modeling
Digital from
DS8000
0-100 V
1 μA to 10 mA
SIU/built-in
stimulator
TTL
0-100 V
1 μA to 10 mA
Mono/Biphasic
TTL
Compatible Stimulator:
DLS100
0
00
STIMULATORS, ISOLATORS
8
DS
A320
8
DS
0
00
A3
00
10
A3
00
10
A3
00
10
A3
00
10
A3
00
10
A3
A365
±100 V
1 μA to 10 mA
8
DS
0
00
A3
A385
High Current
TTL
±36 V
10 μA to 100 mA
8
DS
0
00
A3
A395
Analog
Analog
±10 volts
±70 V
1 μA to 10 mA
Analog
0-1 volt
±500 nA
8
DS
0
00
A3
DUO 773
Intracellular
Amplifier
8
DS
0
00
A3
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
23
STIMULATORS, ISOLATORS
DS8000 8-Channel Digital Stimulator
● Single board computer w/ LCD touch screen
● Lifetime firmware upgrades via serial / Ethernet
● Scope mode displays waveforms
● Unipolar, bipolar, paired pulse, sine, ramp, custom
● 8 banks of 3 timers, synchronous / asynchronous
● Custom upload of real biopotentials
● 8 internal and 8 external trigger inputs
● 2 independent full parameter memory banks
● 32 separate outputs ( 24 BNC's front panel )
● GLP / GCP compliant w / password protection
The DS8000 represents a quantum leap in the performance of the
research stimulator, and is the most advanced stimulator on the
market. With a built-in computer, the entire waveform is generated
digitally with precision timing. The DS8000 can generate stimulating
wave patterns of a complexity unmatched by any other instrument
on the market. A built in digital oscilloscope allows the user to
preview waveforms on the LCD. An Ethernet connection allows the
user to transfer custom waveforms and upgrade the software using
TCP/IP protocol via remote access.
The DS8000 has 8 analog outputs, 8 TTL outputs and 8 combined
analog or TTL outputs. Each combined output can be comprised of
a combination of any of 1 to 8 channels. Eight independent internal
timers and eight independent external triggers are offered. The
built-in waveforms include unipolar, bipolar, and paired pulse, as well
as step, sine, ramp and custom. An external trigger, internal analog
channel, internal TTL channel, or any of the eight built-in timers can
be assigned to control each output channel. A unique feature of the DS8000 is the capability to stimulate with
a waveform that is identical or similar to real biopotential wave
patterns associated with ECG, EEG or action potentials. A biopotential
waveform captured by a data acquisition system may be transferred
to an Excel spreadsheet for editing or modification, then loaded into
to the DS8000.
One of the main problems of designing a stimulator is that a user
might want very different stimulating patterns for different research
applications. In order to satisfy all of these needs, traditional logical
circuit based stimulators have control panels that use buttons
and knobs to give the user as much control options as possible.
However, even with a full panel of buttons, the selection of the
stimulating pattern is still very limited. These types of stimulators
can not generate complicated waveforms, such as combination
pulses at varying interpulse intervals and amplitudes. Although
microprocessor-based stimulators have made a significant step
in solving these problems, certain complex waveforms are still
impossible to generate. In fact, this decade old technology has
serious limitations since each control button has been programmed
to perform multiple functions. Moreover, it can only display limited
lines of scrolled text—no graphics! To complicate matters, it is
almost impossible to upgrade the software with new functions once
the instrument has been manufactured; even the programming is
awkward.
The DS8000 overcomes the hardware limitations of other types of
stimulators by being reliant on a flexible software-timing interface.
The user can then apply this dynamically to almost any kind of
stimulation protocol without being restricted by the hardware
limitations of the traditional logical circuit based stimulators. In order
to suit complex custom protocols, the DS8000 is designed to offer a
unique flexibility by simply reprogramming the pattern output using
a few keystrokes under pull-down menus.
Although it may be argued that some functions of the DS8000 can
be implemented on a standard PC, it is important to recognize that
the inherent design of a PC operating system makes the accurate
delivery of precision pulse protocols impossible. Despite the fact that
PCs are very economical, they are simply not designed to generate
highly accurate timing because the microprocessor resources are not
prioritized for this function. In addition, analog waveform generation
is not readily available without adding expensive output boards and
the required programming is non-standard. The DS8000 platform is
based on a powerful single board computer that is fully dedicated
to the temporal accuracy and precision required in current biological
and neurological research. Indeed, the DS8000 Digital Stimulator
offers all of these solutions plus Good Laboratory Practices (GLP)
compliance for research traceability.
DS8000 — there is no competition!
DS8000
8-Channel Digital Stimulator
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
24
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
A quantum leap in the performance of the research stimulator
Paired Pulse Protocol
The DS8000’s Paired Pulse function allows
the user to generate triggered paired
pulses (including refractory period) from a
single channel without the use of a train
function. WPI’s paired pulse algorithm
simplifies the arduous repetitive task normally
associated with manual resetting of interpulse
intervals in refractory studies. Auto-increment
eliminates the need to overlap train functions
from multiple channels to generate a complete
protocol. Thus, there is a significant reduction in
setup time and a minimization of the potential
for human error during interactive protocol
modification. Fig. 1 shows Channel 1 configured in
the TRIGGERED PAIRED PULSE mode.
In this example, a dual pulse event
occurs synchronously with each trigger pulse
from Channel 8, which is set to trigger every
300 ms. The initial interpulse interval is set
to 20 ms. Subsequent interpulse intervals
are automatically incremented by 35 ms for
each three consecutive paired pulse events.
The resulting paired pulse is displayed in the
lower trace on the DS8000 scope (Fig. 2). The
upper trace shows the master trigger pulse set
up on Channel 8.
Fig. 3
Graphic User Interface
CA BNC outputs. The setup in Fig. 4 indicates
that all TTL channels are assigned to their
respective CTTL outputs with the exception
of the output of CTTL 1, which is assigned a
combination of the TTL signals from channels
4 and 5. Changing assignments is as easy
as checking the associated box. The CA tab
reveals an identical matrix for programming
the COMBINED ANALOG BNC outputs.
Fig. 2
Scope Display
Combined Channel Assignment matrices
The CTTL (COMBINED TTL matrix) and CA
(COMBINED ANALOG matrix) screens permit
the assignment of any combination of the
8 available TTL or Analog signals to any
permutation of the respective (8) CTTL or (8)
Fig. 4
Combined TTL Matrix
DS8000 Specifications
Timing parameters
Period (total signal width)
0.04 ms to 10,737,418.24 ms
Pulse width
0.02 ms to 10,737,418.24 ms
Bipolar gap width
0.00 ms to 10,737,418.24 ms
Operating Modes
Free run, triggered, gated, Train, DC
Triggers
8 External, manual, TTL 1-8, combined TTL 1-8, timer start or stop
Train events
1-199
Train pulse width
0.02 ms to 10,737,418.24 ms (3 hours)
Train pulse DELAY
0.04 ms to 10,737,418.24 ms
Train period
0.06 ms to 10,737,418.24 ms
BNC Output connectors
Analog, combined analog, combined digital (TTL)
WaveformsUnipolar, bipolar, rectangular, sine, ramp, step, paired pulse, custom defined
Custom waveform
12 steps/ voltage point (1025 if remote controlled)
VARIABLE step waveform
100 points (1025 if remote controlled)
Output Noise
< 5 mV rms
Timing Accuracy
< 100 ppm
OUTPUT Voltage Resolution
5 mV
Max. output voltage
+/-10V @ +/- 10 mA @ 0.005 V/step
Output impedance
50 Ohm Analog, < 1 ohm Combined Analog
External TRIGGER sync
40 µs minimum pulse TTL, CMOS
20 µs glitch and spike protection
5V max 10 mA (input); 25V @ 500 mA Digital I/O
(open collector output)
Mains voltage
85-260 V AC, 45-65 Hz 50W
Dimensions
13.3 cm x 42.5 cm x 25.4 cm
5.25” x 16.73” (19” rack) x 10”
SHIPPING Weight
12 lb (5.5 kg)
Ambient temperature
-10 to +40 °C; -20 to +50 °C (Internal)
HumidityMax. 95% relative humidity, non-condensing
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
25
STIMULATORS, ISOLATORS
Fig. 1
Channel Settings
Soft Keys and GUI interface
The DS8000 employs “soft keys”, which are
programmable controls widely used in several
menu options to sequentially change the
numerical value of any variable waveform
parameter. The DS8000’s soft keys are easily
recognized as single or double “+” and “-“ signs
located adjacent to a parameter value box (Fig.
1). Soft keys provide quick and easy access to
modify parameter values on the fly during an
experiment. The GUI interface (Fig. 3) enables
the user to assign the incremental value of the
soft key to suit the needs of the experiment.
Alternatively, a pop-up numeric keypad is
accessible for each parameter to program
a precise value that is not a multiple of the
softkey-preset increment.
STIMULATORS, ISOLATORS
A300 Pulsemaster ™
Multi-Channel Stimulator
An integrated five-channel pulse generator/stim­u­la­tor including
one in­ter­val generator, five pulse or train channels, two mixer chan­nels and one
very quiet vari­able voltage out­put stage
The Pulsemaster™ (Model A300) is WPI’s third generation,
multichannel, pulse/train gen­er­a­tor/stimulator that combines the
superb accuracy of dig­i­tal elec­tron­ics with the “you-see-what-you-get”
displays only available on single-channel products. In one compact
rack mountable enclosure, the Pulsemaster contains an event interval
generator, five pulse train channels, two mixing channels and a very
quiet variable voltage output channel. Sys­tem timing is accurate to
100 ppm; output timing is continuously variable in 0.1% of full scale
in­cre­ments over a range of eight orders of magnitude. Bright, threedigit LED displays continuously and simultaneously show all the
variable timing pa­ram­e­ters.
The Pulsemaster is designed for ease of use and flex­i­bil­i­ty. Each
channel can be operated synchronized with the onboard event
interval generator, trig­gered manually from any other channel
or external source, and as an in­de­pen­dent asynchronous pulse
generator. Except for the external source, all channel in­ter­con­nec­
tions are accomplished on the panel, without the use of cables. The
output from each channel is compatible with standard digital circuitry
and is also designed to drive WPI’s A300 series stimulus iso­la­tors.
If desired, any channel’s output may be in­ter­nal­ly connected to the
variable channel, whose am­pli­tude can be continuously adjusted
from mil­li­volts to ten volts.
The Event Interval
The EVENT INTERVAL is the heartbeat of the Pulsemaster. Based on
a high­ly ac­cu­rate and stable crystal oscillator, the EVENT INTERVAL
generates syn­chro­ni­za­tion pulses at regular intervals. The width of
the sync pulses is fixed at approximately 6 µs, but their repetition
interval is panel adjustable from 10 µs to 999 s, using the display
and its associated switches. Sync pulses may also be generated at
random or irregular intervals by using the SINGLE EVENT or the
EXTernal SYNC mode. The sync pulses are internally dis­trib­ut­ed to
the five PULSE TRAIN channels and are also available externally
through the SYNC OUT connector.
The Pulse Train
There are five PULSE TRAIN channels in the Pulsemaster. Except for
sharing a common power supply, each is an independent instrument.
Each channel has two adjustable timing parameters, DE­LAY and
WIDTH, which in com­bi­na­tion with in­ter­nal or external signals may
be used to create a variety of pulse and train waveforms. DELAY
and WIDTH parameters can be changed while the instrument is
operating.
The basic difference between PULSE and TRAIN modes is the
number of pulses that can be generated per sync pulse. In PULSE
mode, only one pulse is generated for each sync pulse. As the sync
pulse is received from one of the selected input sources, the leading
rising edge of the pulse is recognized and a DELAY time/pulse
WIDTH pair is generated. In TRAIN mode, multiple pulses can be
generated per sync pulse. As in PULSE mode, as the lead­ing rising
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
26
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
A300 PULSEMASTER SPECIFICATIONS
edge of the sync pulse is recognized, a pulse WIDTH/DELAY pair is
gen­er­at­ed. Pulses (WIDTH/DELAY pairs) are con­tin­u­ous­ly produced
as long as the sync pulse is still “high” at the con­clu­sion of the
DELAY time.
EVENT INTERVAL CHANNEL
Operating Modes
EXTernal SYNC, SINGLE EVENT, CON­TIN­U­OUS ON
Input
EXT SYNC accepts ≥ 1µs pulses; TTL, CMOS, By means of the INPUT SELECT switch, sync pulses can be
received from an external source through the EXT SYNC connector,
manually by the SIN­G LE switch, from any of the other PULSE TRAIN
channels, or one of the MIXER channels. The chan­nel may also be
disabled by switching to one of the OFF positions.
RS232C compatible
EXT SYNC position: permits control of the PULSE TRAIN channel by
other instruments and computers.
SINGLE EVENT position: pulses are generated at your discretion.
Every time the SINGLE button is pressed, one and only one DELAY/
WIDTH se­quence is generated.
EI position: connects the output of the EVENT INTERVAL generator
to the input of the PULSE TRAIN channel. For every output sync
pulse from the EVENT INTERVAL generator, one DELAY/WIDTH pair
is generated.
PT positions (4): internally connect the outputs from the respective
PULSE TRAIN chan­nels to the input of this PULSE TRAIN channel. In
the PULSE mode, for every OUTPUT pulse from the other selected
PULSE TRAIN channel, one DELAY/WIDTH pair is generated from this
channel. In the TRAIN mode, puls­es are generated from this channel
as long as the pulse from the other channel remains “high.”
MIX positions (2): internally connect the outputs from the respective
MIXER chan­nels to the input of this PULSE TRAIN channel. In the
PULSE mode, for every OUT­PUT pulse from the MIXER channel, one
DELAY/WIDTH pair is gen­er­at­ed from this channel. In TRAIN mode,
pulses are generated from this chan­nel as long as the pulse from the
MIXER chan­nel remains “high.”
OUTPUT connector: supplies the wave­forms generated by the
PULSE TRAIN channel. This OUTPUT is designed to drive WPI’s
A300 series stimulus iso­la­tors. It is also useful for syn­chro­niz­ing
other in­stru­ments (recorders, os­cil­lo­scopes, com­put­ers, etc.) with the
pulses generated from the Pulsemaster.
The Mixer
The MIXER does what its name im­plies, it combines any or all of the
outputs of the PULSE TRAIN channels with ex­ter­nal signals into one
wave­form. It can also provide a continuous (DC ON) or mo­men­tary
(DC MOM) “high” level sig­nal. The Mixer OUTPUT con­nec­tor sup­
plies the com­bi­na­tion wave­forms gen­er­at­ed by the MIX­E R channel
to drive WPI’s A300 series stimulus iso­la­tors or to syn­chro­nize the
operation of other in­stru­ments with the Pulsemaster.
The Variable Channel
The VARIABLE channel can replicate the OUT­PUT waveforms from
any of the PULSE TRAIN or MIX­E R channels at amplitudes that can
be varied from millivolts to ten volts. The channel also pro­vides a
very low noise, ad­just­able DC voltage source: the DC mode which
converts the VARI­ABLE chan­nel into a constant voltage source. The
OUTPUT con­nec­tor supplies the am­pli­tude mod­i­fied wave­form or the
DC voltage level of the VARI­ABLE chan­nel.
SYS-A300 Pulsemaster™ Multi-Channel Stimulator
Specify line voltage
EVENT INTERVAL 10 µs to 999 s (100 kHz - 0.001 Hz), ±0.1% of full scale, continuously variable in 0.1% of full scale increments, through three orders of magnitude, in six ranges
Output
SYNC OUT pulse of ≈6 µs, TTL, 5 V CMOS compatible
STIMULATORS, ISOLATORS
SELF SYNC position: the channel becomes a free running pulse gen­
er­a­tor. The symmetry of the wave­form can be adjusted by varying
the DELAY and/or the WIDTH times.
Timing
PULSE TRAIN CHANNEL (5 provided)
Operating Modes
EXTernal SYNC, SELF SYNC, manual SINGLE event, sync from Event Interval, sync from any of other four Pulse Trains, sync from one of the MIXers, off, TRAIN/PULSE
Input
EXT SYNC accepts ≥ 1µs pulses; TTL, CMOS, RS232C compatible
Timing
DELAY and WIDTH 10 µs to 999 s, ±0.1% of full scale, continuously variable in 0.1% of full scale increments, through three orders of magnitude, in six ranges
(.0005 Hz to 50 kHz in the SELF SYNC mode)
Output
OUTPUT PULSE/TRAIN of preset timing, TTL, 5 V CMOS compatible, 4 mA sink and source
MIXER CHANNEL (2 provided)
Inputs
Any combination of an EXTernal pulse, the outputs of the five Pulse Train channels, and DC continuous ON/
DC MOMentary EXT INPUT accepts ≥ 1µs pulses; TTL, CMOS, RS232C compatible
Output
OUTPUT, TTL, 5V CMOS compatible, 4 mA sink and source
VARIABLE CHANNEL
Inputs
Output from any one PULSE TRAIN channel or one of the two MIXER channels or DC
Output
0 to +1 V low range, 1 mV resolution
0 to +10 V high range, 10 mV resolution
5 mA max sink and source
Output Impedance <1 ohm
Noise
<500 µV peak @ 100 kHz bandwidth, PULSED mode
<500 µV, wide band, DC mode
Signal Ground
Floating, i.e., not connected to chassis
POWER
95-135 V or 220-240 V, 50/60 Hz
BATTERIES
Three 1.2 V DC, size AA, NiMH batteries
DIMENSIONS
8.5 x 19 x 8.75 in. (22 x 45 x 22 cm)
SHIPPING WEIGHT 21 lb (9.5 kg)
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
27
STIMULATORS, ISOLATORS
A310
Accupulser ™
Stimulus Isolator
(A360)
Optional footswitch #3259
Combining the accuracy of dig­i­tal
electronics with the con­ve­nience of
analog controls
A pulse generator/stimulator combining the reproducibility and accuracy
of digital electronics with the fine resolution and continuous adjustment
pos­si­ble with analog circuitry. All timing pa­ram­e­ters are entered with tenturn readable po­ten­ti­om­e­ters and six-position range switches. Outputs are
ac­cu­rate to within 1% of the set value.
Pulses can be created in continuous run, single-shot, or train/burst
modes. Duration of the train/burst is easily controlled using the onboard
envelope generator or by using either of two external gating inputs. Used
in con­junc­tion with the A360, A365, A385, or A395, bipolar pulses or
trains may be easily produced. Output stimulus can be fed through the
Duo 773 for iontophoresis. Footswitch allows hands-free operation.
Three separate outputs are available on the front panel. A Monitor
output provides 10-15 V signals (up to 50 mA) for viewing the output on
an os­cil­lo­scope or for controlling other devices. The stimulator’s signal,
si­mul­ta­neous­ly available at the Isolator output, is sufficient to drive any
WPI A300 Series stimulus isolator (A360, A365, or A385) and is also TTL
and CMOS compatible. The Variable output can provide signals varying
between ±10 V with a resolution of 1 mV. Separate variable outputs are
provided for positive and negative signals.
SYS-A310
Accupulser™ Signal Generator
Specify line voltage
OPTIONAL ACCESSORIES
3259
Footswitch for A310
2933
Rack Mount Kit, 51⁄4 in. high
A310 ACCUPULSER™ SPECIFICATIONS
TIMING PARAMETERS
EVENT INTERVAL
100 µs to1000 s*
EVENT DELAY 10 µs to 100 s *
PULSE WIDTH
10 µs to 100 s *
TRAIN DURATION (ENVELOPE)
100 µs to 1000 s*
PULSE INTERVAL
20 µs to 100 s*
OUTPUTS
SYNC 5 µs, TTL, and 5 V CMOS com­pat­i­ble, 20 mA max.
MONITOR
10-15 V, 50 mA max.
ISOLATOR TTL & 5 V CMOS com­pat­i­ble, 20mA max.
VARIABLE (Pos or Neg)
PULSED/DC
LOW RANGE
HIGH RANGE
Range
0 to ±1 V 0 to ±10 V
Resolution
1 mV
10 mV
NOISE
Pulsed at 100 kHz bandwidth <500 µV
DC Wide Band
<500 µV
OUTPUT IMPEDANCE
<1 Ω
INPUTS
EXTERNAL SYNC
Accepts 1-µs min­i­mum pulses TTL, CMOS compatible
EXTERNAL GATE
Accepts 1-µs pulse to continuous
TTL, CMOS compatible
POWER
95-130 V or 190-260 V, switch selectable single phase, 50/60 Hz
DIMENSIONS
17 x 5.25 x 10 in. (43 x 13 x 25 cm)
SHIPPING WEIGHT
14 lb (6.4 kg)
*Continuously variable in six ranges. All accuracies better than 1% of set value.
50kHz maximum pulse frequency.
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
28
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
for use with DS8000
Digital Stimulator
Top View
The new DLS100 is preferentially optimized for applications in which the
DS8000 digital stimulator is used.
DLS100 connects to the DS8000 via a flexible cable through which
it receives power and stimulus signals in a digital format. Up to eight
DLS100 isolators can be connected independently to one DS8000. Very
high isolation is achieved through the use of optical coupling of the
digital signal and a galvanically isolated DC power supply within the
DLS100. Unlike some other multi-channel isolators, this digital isolator
can be located at the site of the experiment, allowing the use of short
connecting leads and thereby preserving high isolation and fast signal
rise and fall times.
The DLS100 operates in two modes: current source or voltage source.
In the current source mode, the output current is proportional to the
amplitude and polarity of the signal generated by the DS8000. In the
voltage source mode, the output voltage is proportional to the amplitude
and polarity of the signal generated by the DS8000. The DLS100 has
user-selectable push-button switches that select different current or
voltage ranges (the full-scale current from 1 µA to 10 mA, or the 10V
and 100V full-scale, respectively). Three status indicators on the DLS100
indicate power on, activity (presence of signal from DS8000) as well as
an alarm (over-range condition) indicator. Over-range can occur when
the resistance of the load (the experiment) is too high for the current or
voltage that is demanded from the DLS100.
DLS100 SPECIFICATIONS
Curent Source Mode
Full-scale Current
Compliance Voltage
Output Impedance
Zero-signal Leakage
Linearity
Bandwidth
10 mA, 1 mA, 100 µA, 10 µA, 1 µA, bipolar
± 100 volts
Greater than 100 Megohms
Less than 0.01% of full-scale range setting
≤ 10 mV @ 100 V / 10,000 Ohms,
10 mA Scale = < 1 µA Leakage
Better than 0.05% of full-scale range setting
Range and load dependant: 20 kHz with 10K load and 100 µA or above range.
Voltage Source Mode
Full-scale Voltage
Maximum Current
Output Impedance
Zero-signal Offset
Linearity
Bandwidth
± 100 volts
10 mA
Less than 1 ohm
Less than 1 mv
Better than 0.05% of full-scale range setting
50 kHz
ISOLATION
Resistance
Capacitance
Greater than 1000 Megohms
Less than 10 pF, from output terminals to DS8000 and earth ground
POWER REQUIREMENTS
+12 volts and +5 volts, supplied by DS8000
DIMENSIONS
14 x 9 x 3.5 cm (5.5 x 3.5 x 1.5 in.)
OUTPUT TERMINALS
Mini-banana jacks
CONNECTING CABLE
150 cm (5 ft)
DLS100
501670
83016
503301
Digital Linear Stimulus Isolator
Adapter, Dual Mini-Banana-to-BNC(F)
Replacement Cable, DLS100-to-DS8000
Cable, mini-DIN extension, 10-ft
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
29
STIMULATORS, ISOLATORS
Digital
Linear
Stimulus
Isolator
Isostim™ Stimulator/Isolator
STIMULATORS, ISOLATORS
Combining the ease of use and accuracy of WPI’s 300 Series stim­u­la­tors
with the power output of a stimulus isolator
Timing
Pulse interval
and width are set
with single-turn
continuously variable
con­trols from 5 ms to 5.5 s in three ranges. Pulse width is
continuously variable from 50 µs to 550 ms in four ranges.
Modes of operation
In FREE RUN, Isostim™ generates con­tin­u­ous square waves. In EXT GATE or
EXT SYNC modes, externally applied pulses can generate trains or single
events. Single pulses of finite duration can be produced using a push-button
on the instrument’s front panel. EXT/DC mode converts Isostim to a passive
stimulus isolator.
Dual tone audible alarm
A tone sounds when an open circuit is detected or when system compliance
is reached. A second tone, which sounds when a signal is applied to the
input, can only be heard if the batteries have sufficient charge to operate the
isolator. A violation light advises when pulse width exceeds the interval.
Current delivery
Stimulus currents up to 10 mA can be set on the front panel with a control
knob and a two-po­si­tion range switch. Output current is load-in­de­pen­dent.
Power
Isostim model A320D is powered by readily ob­tain­able 9-volt alkaline
batteries (in­clud­ed). Un­der average use these will last several months before
re­place­ment is required. The re­charge­able A320R is supplied with a nickel
metal hydride battery stack which provides 10-12 hours of operation before
recharge is required. The A362 Battery Charg­er must be used with the
A320R.
ISOSTIM™ SPECIFICATIONS
TIMING PARAMETERS
Interval
5 ms to 5.5 s continuously variable in three ranges (0.18 to 200 Hz)
Pulse width
50 µs to 550 ms continuously variable in four ranges
INPUT
External sync
Accepts 1 µs minimum pulses
External gate Accepts 1 µs pulse to continuous
Ext. command voltage threshold
2.5 V at 3.5 mA min., 8.5 V max.
OUTPUT
Waveform
DC, pulse from internal timing or externally generated pulse
Current ranges
0-1 mA, 0-10 mA
Load voltage excursion (com­pli­ance) 100 V nom., 150 V max.
Output polarity Reversible, manual switch
Current rise time and delay
8 µs, typical (1 K Ω load)
Current fall time and delay
10 µs, typical (1 K Ω load)
Leakage resistance, output to ground1012 Ohms
Optocoupler
2500 V rated min. breakdown voltage
POWER
Dry Cell (Version D)
16 alkaline 9V batteries included
Rechargeable (Version R)
16 rechargeable NiMH 9V batteries incl
DIMENSIONS
8.5 x 3.5 x 4.9 in (22 x 9 x 12 cm)
SHIPPING WEIGHT
4 lb (1.8 kg)
A362 Battery Charger
Required for A320R, A365R and A395R
Recharges the high-voltage nick­el-cad­mi­um or NiMH battery stack in the
A320R, A365R or A395R. LED lamp indicates charg­ing sta­tus. Full charge
over­night. Di­men­sions: 2.8 x 4.1 x 5 in. (7 x 10 x 13 cm). Ship­ping
weight: 4 lb (1.8 kg).
SYS-A362
A320RC
SYS-A320D SYS-A320R
Battery Charger for A320R, A365R, A395R
A320R with Charger (A362)
Isostim™ Stimulator/Isolator
Isostim™ Stimulator/Isolator (rechargeable)
Specify line voltage
OPTIONAL ACCESSORIES
DRL
Dummy Load Resistor Kit (set of 3)
13347
BNC-to-Double Banana Adapter
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
30
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Stimulus Isolator / Precision Current Source
STIMULATORS, ISOLATORS
Model A365 includes the same features and specifications as A360
but with the added capability for automated bipolar pulsing for zero net
charge on biological preparations.
Polarity — Output polarity is determined by a push switch on the front
panel. Bipolar current is toggled by the command waveform, setting al­ter­
nat­ing pulses as positive or negative.
A365 SPECIFICATIONS
OUTPUT WAVEFORM
DC or current pulse
OUTPUT CURRENT RANGES
0.1, 1.0, and 10 mA
CURRENT AMPLITUDE ERROR
0.5% of full scale, max.
CURRENT RESOLUTION
0.1% of full scale, typical
OUTPUT LOAD VOLTAGE
EXCURSION (COMPLIANCE)
100 V
EXTERNAL COMMAND THRESHOLD
2.2 V at 2.6 mA, min. 8.5 V, max.
OUTPUT POLARITY
Reversible, manual switch or automatic
CURRENT RISE TIME & DELAY
6 µs, typical (1 KΩ load)
CURRENT FALL TIME & DELAY
10 µs, typical (1 KΩ load)
OUTPUT TO GROUND RESISTANCE
1012Ω
OPTOCOUPLER
2500 V, rated min. breakdown voltage
POWER
Model A365D (dry cell)
Model A365R (rechargeable)
16 alkaline 9 V batteries, included
16 rechargeable NiMH 9 V batteries incl.
DIMENSIONS
8.5 x 3.5 x 5 in (22 x 9 x 12 cm)
SHIPPING WEIGHT
4 lb (1.8 kg)
SYS-A365D
A365RC
SYS-A365R
SYS-A362
High Voltage Isolator, Bipolar, alkaline batteries
A365R with charger (A362)
High Voltage Isolator, Bipolar, rechargeable
Battery Charger for A320R, A365R, A395R
Specify line voltage
OPTIONAL ACCESSORIES
DRL
Dummy Load Resistor Kit (set of 3)
3468
Dual Rack Mount Kit for A365
3469
Single Rack Mount Kit for A365
13347
BNC-to-Double Banana Adapter
DRL —
Dummy Load
Resistor Kit
Converts current
output to precise
voltages.
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
31
STIMULATORS, ISOLATORS
Combines optical isolation with a ±100 mA current generator
A385 High
Current Stimulus
Isolator
Delivers positive, negative, or bipolar currents. For bipolar delivery,
polarity of the output is toggled to the opposite state with each pulse
presented to the input. Pulse duration is controlled by an externally
applied voltage. In­put connector is a standard BNC, allowing signals from
any source — such as computer D/A or I/O lines — to be used.
Output amplitude is set on a 3-digit, ten-turn dial as a percentage of
the range selected: for example, a setting of 45.6 in the 0-10 mA range
trans­lates to 4.56 mA at the output. Ac­cu­ra­cy and repeat­abil­i­ty are ex­cel­
lent. Designed for sub­cu­ta­ne­ous stim­u­la­tion, max­i­mum out­put volt­age at
the stim­u­lat­ing elec­trodes is 36 volts, re­duc­ing the pos­si­bil­i­ty of se­ri­ous
ac­ci­den­tal tran­s­cu­ta­ne­ous shocks. A com­pli­ance/out­put alarm sounds
when the 36-volt lim­it is reached. In­ter­nal cir­cuit­ry main­tains elec­trodes
short-cir­cuit­ed dur­ing in­ac­tive pe­ri­ods (“elec­trode ex­haust­er” fea­ture).
A385 is not ap­pro­pri­ate for tran­s­cu­ta­ne­ous stim­u­la­tion.
The 1.2 amp-hour rat­ing of the six heavy-duty lead-acid re­charge­able
batteries en­sures that ex­per­i­ments will not be in­ter­rupt­ed by dead bat­ter­
ies — even at peak currents. Indicator lights and audible alarms keep the
user constantly apprised of battery charge status. These batteries must
be recharged by the A382 Sys­tem Charger designed especially for the
A385.
A385RC
SYS-A385R
SYS-A382
A385R with A382 Charger
High Current Isolator, rechargeable
Battery Charger for A385 (see below)
Specify line voltage
OPTIONAL ACCESSORIES
3468
Dual Rack Mount Kit
A385 SPECIFICATIONS
OUTPUT WAVEFORM
DC or current pulse
OUTPUT CURRENT RANGES
1, 10, and 100 mA
CURRENT AMPLITUDE ERROR
0.5% of full scale, max
CURRENT RESOLUTION
REPEATABILITY
0.1% of full scale, typical
OUTPUT LOAD VOLTAGE
EXCURSION (COMPLIANCE)
36 V
EXTERNAL COMMAND VOLTAGE
A382
Battery
Charger
An innovative threestep charg­er, A382
employs fast, medium, and
trickle charg­es at a safe, low cur­rent, great­ly ex­tend­ing bat­tery life. After
a fast ini­tial phase, the charg­er au­to­mat­i­cal­ly switches to a constant
voltage mode. When charg­ing is com­plete, the charg­er switch­es to the
trickle-charge mode. LED lamps indicate charging status. (For use only in
charging batteries in­stalled in the A385.)
THRESHOLD
2.2 V, min
OUTPUT POLARITY
Reversible, manual switch, or electronically switched bipolar delivery
CURRENT RISE TIME AND DELAY
6 µs, typical (1 KΩ load)
CURRENT FALL TIME AND DELAY
10 µs, typical (1 KΩ load)
OUTPUT TO GROUND RESISTANCE
1012 Ω
OPTOCOUPLER
2500 V, rated minimum breakdown voltage
POWER
Six rechargeable lead-acid batteries (Requires companion charger A382)
POWER
95-135 V or 220-240 V, 50/60 Hz
DIMENSIONS
8.5 x 3.5 x 5 in. (22 x 9 x 12 cm)
DIMENSIONS
8.5 x 3.5 x 5 in (22 x 9 x 12 cm)
SHIPPING WEIGHT
5 lb (2.3 kg)
SHIPPING WEIGHT
5 lb (2.3 kg)
A382 SPECIFICATIONS
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
32
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
A395 Linear Stimulus Isolator
Replicates a programmed waveform of any shape or polarity
10 V
INPUT
A395RC SYS-A395D
SYS-A395R
SYS-A362
A395R with Charger (A362)
Linear Stimulus Isolator
Linear Stimulus Isolator, Rechargeable
Battery Charger
Specify line voltage
OPTIONAL ACCESSORIES
3468
Dual Rack Mount Kit
3469
Single Rack Mount Kit
A395 SPECIFICATIONS
OUTPUT CURRENT, Imax
3 ranges: 100µA, 1 mA, and 10 mA
OUTPUT VOLTAGE RANGE
± 70 V
OUTPUT BANDWIDTH
10 kHz (measured across 1KΩ load R)
INPUT RESISTANCE
> 20 MΩ
INPUT VOLTAGE @ Imax
± 10 volts
INPUT/OUTPUT LINEARITY ERROR
< 0.5%
RISE, FALL TIME
26 µs @ 10 KΩ
POWER
Model A395D Model A395R
17 alkaline 9 V batteries
17 rechargeable NiMH 9 V batteries
DIMENSIONS
6.5 x 4 x 3.5 in. (16 x 10 x 9 cm)
SHIPPING WEIGHT
4 lb (1.8 kg)
0V
OUTPUT
-10 V
A362 Battery Charger
+100 µA, +1 mA, +10 mA
Required for A320R, A365R and A395R
0
-100 µA, -1 mA, -10 mA
pts
Acce g
o
anal t
inpu
Recharges the high-voltage nickelcad­mi­um or NiMH battery stack in
the A320R, A365R or A395R. LED
lamp in­di­cates charg­ing status. Full
charge over­night.
Di­men­sions: 2.8 x 4.1 x 5 in.
(7 x 10.5 x 12.7 cm).
Ship­ping weight: 4 lb (1.8 kg).
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
33
STIMULATORS, ISOLATORS
All WPI stimulus isolators are designed to supply constant current
because current threshold (not voltage) is the most quantitatively
reproducible parameter for stimulation of nerve and muscle. Model A395
dispenses current reproducibly from its Output terminals; the amplitude
being determined by the selected current RANGE and the input voltage.
Current amplitude is “constant”, that is, load resistance independent,
provided that the I x R (load) product does not exceed the available
battery supply voltage. A visual indicator (the compliance LEDs) displays
if I x R reaches this limit. When the unit is out of compliance, one of the
two LEDs (labeled - and +) illuminate, depending in which direction the
current is flowing. Model A395 D can generate a voltage of 70 volts or
more across its OUTPUT terminals. Thus, the user can be sure that the
amplitude of the current will be as dialed as long as the voltage drop
across the load (stimulus electrode path) does not reach the magnitude
of the supply voltage. The compliance LEDs will then be visible. The user
would then know that (a) too much current was dialed for a given load
or (b) inter-electrode resistance was too high or the electrode circuit path
was open.
Model A395 generates an output current of arbitrary (user-defined)
wave shape; DC, AC, pulse, and combinations thereof. Battery operated,
and pho­to­elec­tri­cal­ly-isolated from the input voltage drive, the instrument
regen­er­ates out­put currents which are linearly proportional to the analog
voltage wave­forms pro­vid­ed by your D/A con­vert­er or sig­nal generator
(see diagram below).
The A395 is ideally suited for data acquisition and stimulator
generators. It can be easily daisy-chained for mutiple channel
requirements.
Current Delivery —A 10 V input
produces the maximum output
current for the current range
selected, i.e., 100 µA, 1 mA,
or 10 mA. Front panel controls
allow DC current to be generated.
Externally applied signals can be
superimposed si­mul­ta­neous­ly (DC
offset). Warning lamps indicate
open circuit or ex­ces­sive current
conditions.
Digital Meter — Measures DC or average output current.
Overload Lamps — Indicate when output voltage has reached positive or
negative compliance voltage limit.
PHYSIOLOGY
Monitoring
MPM-7 Multi-Parameter Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Blood Pressure Measurement for Rats and Mice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
BP-1 Blood Pressure Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
BLPR2 Blood Pressure Transducer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
BAT-10 and BAT-12 Microprobe Thermomemters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
PHYS IOLOGY
Temperature Probes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Small Animal Anesthesia
EZ-FF9000 Fixed Flow System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
EZ-7000 Classic Systwem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
EZ-8800 Basic System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
EZ-1130 Connect Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
EZ-830 Ventilator Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
EZ-168 and EZ-169 Induction Chambers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
EZ-320 and EZ-330 Oxygen Regulators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Euthanex Lids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Mobile Workstations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
E-28000 Vaporizer Pole Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Analgesia
Electronic von Frey Anesthesiometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Plethysmometer (Paw Volume) Meter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Digital Paw Pressure Randall Selitto . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Grip Strength Meter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Incremental Hot Cold Plate Analgesia Meter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Plantar Test Apparatus / Tail Flick Test Analgesia Meter . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Incapacitance Meter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Hot Plate Analgesia Meter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
ATC1000 Animal Temperature Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Ventilators
CW-MRI-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
CW-SAR-830/AP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
microCAPSTAR CO2 Analyzer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Stereotaxic
Precision Stereotaxic Frames for Small Animals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Digital Display Stereotaxic Frames . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Motorized Stereotaxic Instruments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Parallel Rail Stereotaxic Instruments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Stereotaxic Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
34
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Multi-Parameter Monitor
MPM-7
l High-resolution, 10.4” colorful TFT display,
CRT can be connected simultaneously
l ECG, SpO2, NIBP, RESP, TEMP, HR and PR
l Optional Dual-IBP, Et-CO2,. Built-in thermal
recorder. Built-in battery
l HRV and 13 kinds of Arrhythmia analysis
S-T segment analysis
l 300 seconds ECG waveforms review
MPM-7
Multi-Parameter Monitor
OPTIONAL ACCESSORIES
503601
ECG cable, 5 Leads, Defibrilator Protected
503602
NIBP Cuff and extension tube (for small and medium animals)
503603
NIBP Cuff (large animal)
503604
SpO2 ear clip probe and extension cable
503605
TEMP probe (Skin or rectal)
503608
Defi-protected ECG-cable, 5 Leads
503610
Thermal array recorder
l Maximum 72-hour graphic and tabular
trends of all parameters and 72-hour data
records, 100 items alarm event records
l Anti-high-frequency electrosurgical
equipment
l Display 9-channel waveform maximum in
the screen
l 7-channel ECG waveforms displayed in
one screen simultaneously
l Adjustable 3-level audible and visual
alarms
l Application to small size animal or middle
size animal
l Support Ethernet, wired and wireless LAN,
compatible with central monitoring system
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
35
PHYS IOLOGY
WPI’s MPM-7 Multi-Parameter
Monitor offers portable, costeffective, versatile and reliable multiparameter monitoring in the animal
market. Seven core parameters and
options allow the monitor to be
used standalone in small animal
clinics and large veterinary facilities
by connecting, wire or wireless,
with a central monitoring system.
The high-resolution color screen
clearly displays time, alarms, ECG,
Heart Rate, NIBP, Pulse Oximetry,
Respiration Rate, Apnea Trends,
Temperatures and Trace Freeze
simultaneously. The operators
can ceaselessly browse the data
in the previous 240 hours and
store 72 hours of data in memory.
With optional internal thermal
printer, 3 waveforms can be
recorded. To cope with modern
clinics equipped with many highpowered electronic instruments,
the monitor is designed for
protection from defibrillator and
high-frequency electrosurgical
generator when used on the same
animal at the same time. In the
event of an unexpected power
shortage, a built-in rechargeable
battery keeps the monitor
continuously working for 2 hours
and can be automatically and
rapidly recharged.
Blood Pressure Measurement for Rats and Mice
PHYS IOLOGY
Proprietary environmental control
system and unique single tail cuff
that allows animals to move their
tails create minimal stress in the
animal subjects
l Configurable for 1-24 animals
l MRI systems available
l Quick and accurate blood pressure
measurement at temperatures as low as 32˚C
l Highly sensitive photoelectric sensor for
blood pressure detection
l Monitor, record, store or export real time
systolic, diastolic, mean and heart rate with
custom-designed software
Measuring blood pressure in mice
Number of
Manual Inflation
and rats is tricky business. The key
Animals
is to minimize stress to the animal
Part #
that causes its vital signs to fluctuate.
This unique system was designed to
II-29M
1
produce accurate measures every time,
3
because animal stress is truly minimal.
Two primary sources of stress include
6
thermostress and lack of creature
12
comforts. The proprietary environmental
control system is set to a constant 32˚C,
24
the optimal temperature for taking blood
pressure measurements for rats. If desired, the setpoint can be easily
altered to meet the researcher’s needs. In addition the single tail cuff
(instead of two cuffs) makes this a one-of-a-kind system. The single cuff
design gives the test subjects unrestrained freedom of tail movement,
making them more comfortable and reducing unnecessary stress.
Automatic Inflation
Part #
Auto Inflation with Data
Acquisition Software
Part #
II-229M
II-229M31
II-3M229SC
II-3M229SC31
II-6M229
II-6M22931
II-12M229
II-12M22931
II-24M22931
Components include:
Tail Cuff Sensors
Rodent Restrainers
Warming Chambers
Tail Cuff Stand
Amplifier (Manual or Auto Inflation)
Cuff Pump, Automatic
Scanner, Manual
Accessory Package
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
36
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Blood Pressure Monitor and Transducer
● Monitors animal arterial or venous blood pressure
● Displays systolic, diastolic or average blood pressure
BP1 accepts WPI’s BLPR blood pressure transducer (below) as well as other
blood pressure transducers.
An audio monitor provides a signal with variable pitch and am­pli­tude,
allowing you to hear changes in blood pressure. Digital LCD display pro­vides
average or peak signal values from 0 to 1999 mV. With an optional pressure
gauge (not provided — see PM015D/R, page 259), the user may cal­i­brate the
display to read mm Hg. Re­cord­er out­put con­nec­tor al­lows di­rect con­nec­tion to
a pen re­cord­er, os­cil­lo­scope or com­put­er via a data acquisition system.
BP1 SPECIFICATIONS
AMPLIFICATION
x1, x10, x100, variable (x5 to x1000)
BANDWIDTH, SMALL SIGNAL (-3 dB)
300 kHz (x1)
30 kHz (x10)
3 kHz (x100)
0.3 kHz (x1000)
OUTPUT VOLTAGE SWING
± 5 volts
MAXIMUM OUTPUT CURRENT
2 mA
INPUT IMPEDANCE, EACH INPUT
100 kΩ || 0.01 µF
TRANSDUCER APPLIED VOLTS
10 V nominal, varies with load. 25
mA, maximum
DIGITAL PANEL METER
0 to 1999 mV (calibrated in mm of Hg
pressure when supplied with pressure gauge). Meter reads average value or ± peak (1 to 20 Hz).
POWER
95-135 V or 220-240 V, 50/60 Hz
DIMENSIONS
8.5 x 5.12 x 10 in. (21.6 x 13 x 25.44 cm)
SHIPPING WEIGHT
11 lb (5 kg)
ACCESSORIES
BLPR2
BPCABLE2
503067
13024
13025
3491
500184
14036-15
KZ1101
Pressure Monitor (transducer & cable not included)
Specify line voltage
PHYS IOLOGY
SYS-BP1
NEW Blood Pressure Transducer & Cable
NEW Cable (12 ft) with DIN connector for BLPR2
BLPR2 Transducer without cable
Single Rack Mount Kit
Dual Rack Mount Kit
Extension Cable, 5 ft
BNC-to-BNC Cable, 10 ft
4-Way Luer Stopcock, Blue Tint (package of 15)
Micro Cannula, 3 inch
Note: BLPR2 is intended for animal research only and may not be
used for human blood pressure measurement.
BLOOD PRESSURE
TRANSDUCER
BLPR2 SPECIFICATIONS
WORKING PRESSURE
OVERPRESSURE
EXCITATION VOLTAGE
INPUT IMPEDANCE
OUTPUT IMPEDANCE
ISOLATION
SENSITIVITY
DYNAMIC RESPONSE
EIGHT HOUR DRIFT
MAXIMUM ERROR
ENVIRONMENTAL
Operating Temp. Range
Storage Temp. Range
Light Sensitivity
SHIPPING WEIGHT
-50 to + 300 mm Hg
-400 to +4000 mm Hg
1-10 VDC or RMS to 5 kHz
350 Ω ±10%
300 Ω ±10%
< 5 µA leakage at 120 VAC
5 µV/V/mm Hg
100 Hz
1 mm Hg after 5 minute warm-up
Total combined effects of Sensitivity, Linearity, Hysteresis (at 25°C and 5 µV/V/mm Hg) do not exceed ±2% or 1 mm Hg, whichever is greater.
+15°C to +40°C
-30°C to +60°C
Not affected by light under 3000 ft/candles (32,000 lux)
1 lb
Stopcock #14036
included with BLPR2
BLPR2 can be used for the direct arterial and venous pressure mea­
sure­ment in animal blood vessels. Supplied sterile, BLPR2 is accurate,
linear and stable with temperature. May be sterilized cold with Cidex or a
similar bac­te­ri­cide.
BLPR2 is equipped with a twelve-foot cable and connector com­pat­i­ble
with WPI’s four-channel signal conditioning unit, TBM4M Transbridge,
and the single-channel BP1 blood pressure mon­i­tor. Cable has moistureresis­tant locking connector. A continuous, uniform lumen eliminates
places for bub­bles to form and lodge. The clear fluid path is easy to
inspect. Easy to mount — slotted transducer body accepts Velcro strap.
To facilitate setup and operation, a four-way stopcock that al­lows easy
filling, flushing, and zeroing of the transducer is in­clud­ed. Typically, the
stopcock is located between the trans­ducer and the animal catheter
where it can be used to quickly zero, flush, or de-bubble the transducer.
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
37
Microprobe Thermometers ● Super Accuracy ● Fast Response
● Analog output signal ● Multiple inputs
● Differential Temperature Measurement
BAT-10
PHYS IOLOGY
Stand sold
separately
BAT-12
A Microprobe Thermometer is the instrument of choice for biological and laboratory
temperature measurements. These thermometers are very versatile, providing
fast response, high accuracy and stability with digital display and analog signal
for connection to a computer or recorder. With the wide selection of probes, the
instruments can be used in almost any application.
BAT-12 This thermometer has a sealed construction making it water, dust and
fume resistant. The BAT-12 has a single microprobe input and a single range with
the same high accuracy as the BAT-10. Comes complete with carrying case.
The thermometers can be used with any “Type T” thermocouple. Select a
temperature microprobe on the following page for your specific application.
BAT-10 This is the most versatile thermometer available. The instrument has
a wide temperature range and fast response with most microprobes. The BAT-10
accuracy is NIST traceable and in each of the two temperature ranges, the accuracy
is the same as the resolution. There are three microprobe inputs, 1 and 2 can be
selected as separate inputs while 2 and 3 will read the differential temperature
measurement between the two. The instrument has automatic warnings for low
battery or faulty probes on the digital display. The linearized analog output (LOP)
signal allows ease of connection to a data acquisition system or recorder.
BAT-10R/LOP
Multiple Input Type T Thermocouple Thermometer, rechargeable NiCad batteries and 110 VAC adapter (microprobes ordered separately)
BAT-10R/LOP-220 Multiple Input Type T Thermocouple Thermometer, rechargeable NiCad batteries and 220 VAC adapter (microprobes ordered separately)
BAT-12R
Single Input Type T Thermocouple Thermometer, rechargeable NiCad batteries and 110 VAC adapter (microprobes ordered separately)
BAT-12R-220
Single Input Type T Thermocouple Thermometer, rechargeable NiCad batteries and 220 VAC adapter (microprobes ordered separately)
OPTIONAL ACCESSORIES
EXT-6
Probe Extension Lead, 180 cm long
SBT-5
Thermocouple Switch Box, 5 probe inputs on back with numbered push button switches on the front. Connects 5 microprobes to one BAT-12R
501608
Tripod Stand for BAT-12
MICROPROBE THERMOMETER SPECIFICATIONS
BAT-10
Temperature Range
& Resolution
-200°C to +400ºC, 1ºC resolution
-100°C to +199.9ºC, 0.1ºC resolution
-100°C to +199.9ºC, 0.1ºC resolution
BAT-12
Differential Temp. Range
-19.99°C to +19.99ºC
N/A
Linearization centered at 40°C
0.01°C resolution
ACCURACY
1°C ±1 least significant digit
0.1°C ± 1 digit between 0-50°C
1° Range
0.1°C ± 1 least significant digit
0.1% ± 1 digit over full range
0.1° Range
Diff. Range
0.01°C ± 1 least significant digit
± 1 least significant digit
REPEATABILITY
Conforms to NIST tables
Calibration CONFORMITY
Follows NIST thermocouple tables
within 1 digit
Display
31⁄2 Digit LCD
INPUT SOCKET
Miniature, quick disconnect, copper-constantan Miniature, quick disconnect, copper-constantan
31⁄2 Digit LCD
Analog output
Non-linearized set at 1.6 V, corresponding to temperature of 401°C
≈ 10 mV per degree C
POWER SUPPLY / BATTERIES
BAT-10: 4 alkaline “C” cells (life: 1000 hr)
BAT-10R: 4 Ni-Cad “C” cells (rechargeable unit)
BAT-12: 9V cell
BAT-12R: 9V Ni-Cad with charger
SensorS
Three Type T thermocouple inputs
One Type T thermocouple input
AMBIENT OPERATING RANGE
15-45°C
Auto-compensated to 0.1°C from 0°C to 50°C
dimensions
21.6 x 22.9 x 8.9 cm (8.5 x 9 x 3.5 in.)
12.7 x 6.4 x 15.2 cm (5 x 2.5 x 6 in.)
WEIGHT
1.6 kg (3.5 lb), including carrying case
1 kg (2 lb), including carrying case
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
38
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Temperature Probes
● Flexible Teflon microprobes are used for implantation in tissue, in
spectrophotometer cuvettes, rectally in neonatal mice, in water baths,
PCR thermal cyclers, etc.
● Animal rectal temperatures during surgical procedures and pyrogen
testing.
● Skin temperature measurement during exercise physiology studies.
Probe Type
Size
Style
Time
Isolated
Constant
an accuracy that is usually to 0.5°C or worse.
Furthermore, all our type T clinical probes
are guaranteed accurate to 0.1°C, due to our
stringent wire standards. These are five times
more accurate than competitive probes made
with regular “Special Limits” wire.
Max.
Temp.
Lead
Length
PHYS IOLOGY
When precise temperature measurements
are required, WPI can provide you with a
very accurate monitor and thermocouple
microprobes. WPI monitors have both resolution
and accuracy of 0.1°C in the 0-50°C range
and are traceable to NIST standards, whereas,
other competitive electronic thermometers have
Description
NEEDLE MICROPROBES
Fast-response needle probes for instant readings in tissue, semisolids, liquids, very small specimens, powders and materials. Needle tip is sealed to ensure only stainless steel contacts specimen.
MT-29/1
29 ga / 1 cm
A
0.125 sec
No
200°c
5 ft
29 gauge approximately 0.013-in
MT-29/2
29 ga / 2 cm
A
0.125 sec
No
200°c
5 ft
MT-29/3
29 ga / 3 cm
A
0.125 sec
No
200°c
5 ft
MT-29/5
29 ga / 5 cm
A
0.125 sec
No
200°c
5 ft
MT-26/2
26 ga / 2 cm
A
0.1 sec
No
200°c
5 ft
26 gauge approximately 0.018-in
MT-26/4
26 ga / 4 cm
A
0.1 sec
No
200°c
5 ft
MT-26/6
26 ga / 6 cm
A
0.1 sec
No
200°c
5 ft
MT-23/3
23 ga / 3 cm
A
0.15 sec
No
200°c
5 ft
23 gauge approximately 0.125-in
MT-23/5
23 ga / 5 cm
A
0.15 sec
No
200°c
5 ft
MT-23/8
23 ga / 8 cm
A
0.15 sec
No
200°c
5 ft
MT-4
29 ga / 1 cm
A
0.025 sec
No
200°c
5 ft
Similar to MT-29/1 but has a blunt tip. Good for instant skin and surface temperatures, liquids
—
C
0.025 sec
No
200°c
5 ft
Fast response surface probe (stainless steel for locating MT-D
inflammation, arteries, etc. Also for dental use.
MT-29/1B 29 ga / 1 cm
B
0.015 sec
No
150°c
5 ft
Insect Probe. Similar to MT-29/1 except sensor is welded into tip for maximum heat transfer. Other sizes made to special order.
FLEXIBLE IMPLANTABLE PROBES
Designed for high accuracy on extremely small specimens such as insects, seeds, etc. Maximum insertion depth 1/8". Totally sheathed in chemical resistant Teflon.
Sensor
Lead Diameter
IT-14
0.050" dia
D
0.3 sec
Yes
150°c
3 ft
IT-18
0.025" dia
D
0.1 sec
Yes
150°c
3 ft
IT-18EXLONG0.025” dia.
D
-
Yes
150°c
5 ft
0.016" dia
D
0.08 sec
Yes
150°c
1 ft
IT-21
IT-23
0.009" dia
E
0.005 sec
Yes
150°c
3 ft
IT-1E
0.025" dia
F
0.005 sec
Yes
150°c
3 ft
For ultra fast measurements and for use on micro-size specimens. Tissue implantable with 239a. Needle (supplied). Rather fragile. Teflon coated.
As IT-18 sensor except bead exposed. Combines ultra-
fast reponse of IT-23 with sheath strength of IT-18.
RECTAL PROBES
-
G
0.8 sec
No
125°c
5 ft
RET-2
-
G
0.5 sec
No
125°c
5 ft
RET-3
Rectal probe for rats typically for fast intermittent measurements. Smooth ball tip (0.125-in. dia.) with 1" long (0.59-in. dia) stainless steel shaft.
Rectal probe for mice similar to RET-2 except tip diam. 0.063-in. and shaft 3/4-in. long (0.028-in. diam.)
GENERAL PURPOSE
HT-1
H
0.5 sec
No
400°c
5 ft
HT-2
H
0.5 sec
No
400°c
5 ft
BT-1
I
0.15 sec
No
240°c
5 ft
“Workhorse” probe for liquids, gases, semi-solids. Plastic handle with straight stainless steel shaft. Not good for surface temperatures.
Like HT-1 except shaft length is 9-in.
Plastic handle with welded stainless steel, immersible shaft used for surface temperatures of solids, liquids, gases and semisolids. Tip is 0.02-in. diam., at right angle to probe to facilitate surface measurement.
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
39
Components may not be as pictured.
PHYS IOLOGY
Small Animal Anesthesia
EZ-7000 Classic System
EZ Anesthesia is the system of choice for anesthetizing small animals,
and it comes with a variety of choices. Animals to be anesthetized
are placed in the acrylic induction chamber and the system delivers a
precisely blended mixture of oxygen and isoflurane. An activated charcoal
air filter canister at the top of the chamber releases safe, filtered air back
into the room. A water-heated cage warmer or warming plate (ATC1000)
is used to retain the animal body temperature while in the induction
chamber. After the initial anesthetizing, the animal can be moved to the
heated surgical water bed and positioned properly in the snugly fitted
nosecone. A highly sensitive valve regulated by the animal’s breathing
works with the nosecone to ensure non-rebreathing efficiency, and allow
safe anesthesia for up to several hours.
The breathing device also includes an air filter that releases safe, filtered
air back into the room.
Features
lIntegrated turnkey solution for small animal
anesthesia
lSafe for surgical personnel, 90% below OSHA
Isoflurane limit
lDesigned by veterinarians
lCompact and portable
Each system comes with all necessary components and connections for
immediate use, including::
l Oxygen regulator
l Vaporizer Unit
l One Induction Chamber (standard EZ-169)
l One Breathing Device (standard EZ-103)
l Case of charcoal filters
Other available options include:
l Heated Beds and Heating Pump
l Additional Breathing Devices
EZ-FF9000 Fixed Flow System
The Fixed Flow System is our most advanced system and provides preset,
fixed flow rates with no need for adjustment. The system offers five gas
outlets, each with an individual ON/OFF switch. The system ensures
consistent, precise gas flow when connected to any pressurized gas
source higher than 7 psi.
l Induction Chamber output is fixed at 1 Lpm
l Four Breathing Circuit outputs are fixed at 0.5 Lpm
This unit features an oxygen flush button that purges the induction
chamber with pure oxygen, thereby protecting personnel from exposure
to anesthesia gas when opening the chamber. A handle on the vaporizer
makes the unit easy to safely transport.
EZ-FF9000 Fixed Flow System
lTime efficient and cost effective
EZ-7000 Classic System
lVirtually stress-free for the animals
lEasy to setup and use, simplifying the training of new
staff and reducing the threat of human error
lSpeedy recovery time
EZ Systems include all necessary hardware components and connections.
Oxygen and liquid Isoflurane are not supplied. These are required to
operate the system.
The Classic System is the upgraded version of our original EZ-Anesthesia
system. The new version has a reconfigured flow meter that is more
user-friendly. The system offers five gas outlets that can supply a single
induction chamber and four breather circuits simultaneously.
The upgraded system also features an oxygen flush button that purges
the induction chamber with pure oxygen, thereby protecting personnel
from exposure to anesthesia gas when opening the chamber. A handle on
the vaporizer makes the unit easy to safely transport.
EZ-7000
Classic System
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
40
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
EZ-B800 Basic System
EZ-168 and EZ-169 Induction Chambers
The Basic System is designed for use with a single animal. It utilizes one
output directly from the vaporizer into a Y-splitter which creates a dual
feed that can be directed to the induction chamber or the breather circuit.
These chambers incorporate a positive seal O-ring gasket for containment
during use.
This unit incorporates an oxygen flush system that purges the induction
chamber with pure oxygen, thereby eliminating personnel exposure to
anesthesia gas when opening the chamber.
EZ-B800
EZ-320 and EZ-330 Oxygen Regulators
l EZ-320 utilizes a CGA-540 connection for large ‘H’ tanks.
This kit is used for connecting additional components to the EZ-Anesthesia
Systems. It includes 6 ft of clear PVC tubing with a quick-disconnect fitting.
Connection Kit
l EZ-330 utilizes a CGA-870 connection for small ‘E’ tanks.
EZ-320
EZ-330
Oxygen Regulator for large tanks
Oxygen Regulator for small tanks
EZ-340-XXXX Custom Hose Assemblies
EZ-830 Ventilator Connection Kit
Custom built hose assemblies for wall or ceiling outputs specific to facility
needs: Chemetron, Ohmeda, Schrader or DISS.
Ventilator Connection Kit
Euthanex Lids
Euthanex Gasket Kit
The Euthanex Lid system has become an industry standard. Simply by
removing the water bottle from the wire bar cage cover and placing the
Euthanex Lid over the host cage, you are ready to perform euthanasia.
You no longer need to transfer animals. The lids are available in five
sizes to accommodate virtually all plastic cage sizes designed for small
lab animals. These heavy duty stainless steel lids have a stem fitting
for connection to the quick-disconnect fitting on the regulator hose
from the regulator. A foam lid gasket ensures a good seal on the cage.
Multiple lids may be used to treat several cages at once.
The gaskets seal and reduce noise levels when putting lid on cage. Gaskets are easy to remove and replace. Includes five replacement gaskets
and adhesive strips for mounting.
EZ-20027G Small Lid Gasket (13”x9”)
EZ-20028G Small Lid Gasket (16”x9”)
EZ-20030G Square Lid Gasket (13”x13”)
EZ-20032G Medium Lid Gasket (20.5”x11)
EZ-20034G Large Lid Gasket (23”x16.5”)
EZ-20027 Small Lid (13” x 9”) Fits old-style mouse cages
EZ-20028 Small Lid (16” x 10”) Fits new-style mouse cages
EZ-20030 Square Lid (13” x 13”) Fits Thorn� cages
EZ-20032 Medium Lid (20.5” x 11”) Fits rat cages
EZ-20034 Large Lid (23” x 16.5”) Fits guinea pig cages
EZ-20029 Lid Storage Bracket (wall-mounted,holds up to four lids)
E-28000 Vaporizer
Pole Mount
EZ-211
The E-28000 is a mounting option for
the EZ-Anesthesia system, combining
system portability with a small
footprint. Constructed of Aluminum
and Stainless Steel, it features a five
leg base for maximum stability and
an oxygen ‘E’ tank mounting bracket.
Anesthesia system must be purchased
separately.
EZ-212
EZ-103
E-28000
Vaporizer Pole Mount
Mobile Workstations
EZ-107
EZ-104A EZ-103A EZ-107A EZ-109 EZ-211 EZ-212 Versaflex Non-Rebreathing Unit
Microflex Non-Rebreathing Unit
Rat Stereotaxic Non-Rebreathing Unit
Multi-Animal Non-Rebreathing Unit
Mouse/Rat Thin-Line Heated Waterbed
Mouse/Rat Standard Heated Waterbed
Two mobile workstations, constructed of heavy-duty stainless steel with
locking casters, integrate all your EZ-Anesthesia components into one portable
unit. Open side shelves accommodate 20 lb. cylinders, and convenient 2" port
holes allow for easy rigging of gas and electrical lines. Below the work surface
of each mobile workstation is an open shelf and a locking cabinet. E-25000
provides a 42"x24" work surface and holds up to four cylinders. E-27000 has
a 22"x21" work surface and holds up to two cylinders. These systems are easy
to set up and provide maximum flexibility and mobility.
EZ-25000
EZ-27000
Mobile Workstation, 42" x 24" Top
Mobile Workstation, 22" x 21" Top
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
41
PHYS IOLOGY
This kit is used to connect the SAR-830 ventilators with EZ-Anesthesia
Systems. It includes all required components, pre-assembled for simple
connection between the ventilator and the anesthesia system.
EZ-830
Induction Chamber for Mouse— 5”L x 4.75”W x 4.375” H Induction Chamber for Rat— 9.75”L x 4.75”W x 4/375”H
Regulators are preset to 50 psi.
Basic System
EZ-1130 Connection Kit
EZ-1130
EZ-168
EZ-169
Analgesia
PHYS IOLOGY
Electronic von Frey Anesthesiometer
l Plug up to three probes into a single unit
l LCD readout (Floating or last maximum/minimum)
l Rigid tips up to 800 gm
l “Supertips™” 15 up to 65 gm
l 1,000 gm probe available
l Independence from temperature
l Optional analog output cable for chart recorder
l Pipette tips can be customized to any specification
l Microprocessor electronics 0.1 gm plug-in probes
II-2390
II-2391
II-2392
II-2393
II-23931
II-2394
II-2395
II-2396
II-2397
II-2398
II-2399
II-2400
Electronic von Frey Anesthesiometer, rigid tips, 90 gram range
Electronic von Frey Anesthesiometer, rigid tips, 800 gram range
Electronic von Frey Anesthesiometer, rigid & 15 super tips, 90 gram range
Electronic von Frey Anesthesiometer, rigid & 15 super tips, 800 gram range
Electronic von Frey Anesthesiometer, custom rigid tips, 1000 gram range
von Frey Probe, 90 gram range
von Frey Probe, 800 gram range
von Frey Probe, 1000 gram range
MRI Probe Option (add to price of probe above)
Limit Indicator Option (add to price of probe above)
Cable for Limit Indicator (add to price of probe above)
Analog Output Cable
To assess mechanical allodynia, which is a
painful response to a light touch or pressure
from a stimulus that is not normally painful,
the Electronic von Frey Anesthesiometer was
developed. The Electronic von Frey meter uses
one of 15 different flexible von Frey hairs
called “SuperTips™” (or rigid tips up to 800
grams). Each hair, regardless of model chosen,
is exactly 0.8 mm in diameter. This uniformity
of design eliminates false readings and allows
for comparison of test results. The Electronic
von Frey can be used with chart recorders and
analog/digital converters, and it never needs
calibrated. This system includes either a 90, 800
or 1,000 gram probe. Mesh stands are available
in a variety of sizes for large group studies.
Trio
Get three test systems in one package with the Trio, featuring the
Electronic von Frey, Plethysmometer and Randall Selitto Meters. Just like
the Quattro package, the modular design allows these three test systems
to communicate with the same electronic controller. The stand and sling
for the Randall Selitto test are sold separately.
II-2888
Trio 3-in-1 System
Quattro
This special package offers four tests, including Electronic von Frey,
Plethysmometer, Randall Selitto and the Grip Strength Meter. You get all
four test modules and the electronic controller that is interchangeable
with all four systems. The electronic controller has up to three inputs,
so you can perform up to four unique tests with only one electronic
system. If you prefer, you may build your system and you grow. Because
of the modular design of these four systems, you need to order only
one complete system. Then, the modules for the other three tests, which
integrate into the system, can be purchased separately, as needed. The
stand and sling for the Randall Selitto test are sold separately.
II-2889
Quattro 4-in-1 System
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
42
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Plethysmometer (Paw Volume) Meter
l No wetting solution needed
l One calibration/year
l Battery-operated or line powered controller
l One-year warranty
II-520MP Paw Volume Meter for Mouse & Rat
Randall Selitto Paw Pressure Meter
l Hands free operation with footswitch
l Visible force limit indicator
l Portable electronic display
l Battery-operated or line powered controller
l 3-oz. handheld probe with accuracy of 0.5%
l No calibration required
The Randall Selitto Paw Pressure Meter for
analgesia testing is digitally controlled. Use
the handheld instrument to apply force to an
animal’s extremity and get instantaneous, live
readings. You can even view the last maximum
force applied during the test. The new limit
II-2500
indicator lets you select the maximum force
limit, and then indicates with a warning light
when the system reaches that limit. This unit
comes with an acrylic stand to allow for easy
viewing of the display. Stand and sling are sold
separately.
Randall Selitto Paw Pressure Meter, 800 g pressure applicator
Grip Strength Meter
l Mouse and rat wire mesh grid plates included
l Maximum force range is 2,000 gm (10% over
range allowed). Higher ranges are available
by special order.
l 1 gram increment readings
l Suction feet on the heavy, anodized base plate
resist even large pulling forces
l Battery-operated or line powered controller
l One year warranty
Measure muscle hyperalgesia in rats and mice
with the Grip Strength Meter, which gauges
the forelimb grip force using a digital force
transducer. Simply hold the animal by the
tail and gently dangle it over the wire mesh
plate until the animal grasps the plate with its
forepaws. The force transducer, connected with
the wire mesh plate, measures the strength of
the animal at the time of the test. The batteryoperated, electronic control device calculates the
II-2200
average of three measurements, and it holds the
last maximum force in a “peak and hold” type
readout until you reset it.
Grip Strength Meter for Mouse & Rat
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
43
PHYS IOLOGY
Test the effectiveness of anti-inflammatory agents and agents to reduce
edemic conditions with the Plethysmometer. Simply insert the rat or mouse
paw into water. A sensor in the water notes a pressure change when the
paw is immersed. Pressure is calibrated in 0.1 milliliters and displays on the
battery-powered monitor. The acrylic stand offers full visibility of the subject
throughout the testing.
Analgesia
PHYS IOLOGY
Incremental Hot Cold Plate
Analgesia Meter
l Heat or cool, from 0-70˚C
l Ramping temperatures for threshold and latency results
l Rapid increase or decrease in temperature
l Precise programmable digital control
l Printout of data
l Temperature stability is 0.1˚C
l Includes clear animal enclosure
l Plate size 4 x 8”
l Two-year warranty
This safe, humane device for rats and mice
is used for latency and threshold-based
nocicetption, ramping temperatures for 0-70˚C.
Because this hot cold plate is incremental, it
measures latencies of much more than just the
strong narcotic agents, broadening dramatically
the range of analgesia research with devices
of this type. Microprocessor-controlled, the
Incremental Hot Cold Plate can heat or cool
in increments of 0.1˚C, at a rate of 1-10˚C per
minute. With uniform heating and cooling
and upper/lower cut-off limits, this device is
II-PE34
predictable and safe. It can also function as a
constant temperature plate with great stability
(0.1˚C). As soon as a reaction is observed from
the chosen paw, the unit reverses to the standby
temperature.
Incremental Hot Cold Plate Analgesia Meter for Mouse & Rat
Incapacitance Meter for Mouse & Rat
l Precise programmable digital control
l Start, stop and reset test from controller’s
front panel
l 180-270 gram holder included (other sizes
available)
l Reaction detected automatically
l Manual override of all timer functions
l Alphanumeric readout
l 5 to 999 seconds test period
l Alphanumeric readout
l All functions and parameters entered via
key-pad
l Two-year warranty
II-600MR Incapacitance Meter for Mouse & Rat
Test pain and inflammation in the hind limbs of mice, rats or birds with
the Incapacitance Meter. It uses a technique called dual channel weight
averaging, which tests both hind limbs. This gives you a clean, stressfree correlation of the paw pressure test. Conduct control and testing of
the animal at the same time. Place the animal in the holder with its hind
limbs resting on the two weight-averaging platform pads. The controller
records the average weight (grams) over the test period as the animal
shifts its weight from each pad
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
44
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Hot Plate Analgesia Meter
l Includes both mouse and rat enclosure
l Temperature indicated in 0.1˚C increments
l Holding accuracy is +/- 0.1˚C
l Digitally controlled
l Two-year warranty
II-39
PHYS IOLOGY
Use the Hot Plate Analgesia meters for latency testing in rats and
mice. Simply place the animals on a black anodized, aluminum plate
(11 x 10.5 x 0.75”, 275 x 263 x 15 mm) and set the plate’s surface
temperature to the desired setpoint (up to 75˚C). The plate maintains a
consistent temperature throughout the test.
Hot Plate Analgesia Meter for Mouse & Rat
Plantar Test Apparatus/Tail Flick Test Analgesia Meter
l Includes three acrylic animal enclosures
that each hold two rats or four mice
l Precise programmable digital control
l User-defined humane cutoff feature
l Adjustable beam intensity in 1%
increments up to 250˚C
l Reaction is detected automatically
This unit, which is designed for testing narcotics
and strong non-narcotic drugs, offers both
Plantar (Hargreaves Method) and Tail Flick
testing with a single unit. Either testing system is
also available individually. In plantar mode, the
visible light/heat source is directed at the paw or
other desired body part, and in tail flick mode
it is directed at the subjects’ tails. Test up to 12
mice or 6 rats simultaneously. If desired, other
animals like cats and rabbits may also be used.
Tests are simple to setup. The focused, radiant
heat/light source creates a 4 x 6 mm intense
spot. Because the light is visible, you know
when the test starts and ends. The equipment is
silent (no whining or clicking sounds) to avoid
l Alphanumeric readout
l Manual override of all timer functions
l All functions and parameters entered via
key‑pad
l Heated glass option
l Tail temperature monitor option (for use
with the Tail Flick meter)
triggering an automatic response in conditioned
animals. You can set a humane cutoff timer that
automatically shuts off the heat if no response is
observed during the designated time frame.
When an animal is placed on cold glass, its
reaction time may be slower. This unique system
offers a heated glass option that prevents the
glass enclosure from acting as a heat sink,
giving a more accurate reading. An optional tail
temperature monitor can also be selected for
use with the Tail Flick meter. This option actually
preheats the tail before experimentation. Once
the preset tail temperature is reached, the test
and timer automatically begin. A glass stand
is also available in two sizes for large group
studies.
II-336T
Combination Plantar/Tail Flick Meter, non-heated glass and tail
temperature for mouse and rat
II-336TG Combination Plantar/Tail Flick Meter, tail temperature and heated glass
for mouse and rat
II-390
Plantar Test Analgesia Meter, non-heated glass for mouse and rat
II-390G Plantar Test Analgesia Meter, heated glass for mouse and rat
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
45
PHYS IOLOGY
Animal Temperature Controller
l PID control for maximum temperature stability
l Low noise DC heater
l Dual temperature sensor inputs
l Audible alarm protects the element from overheating
ATC1000 is a low noise heating system for maintaining animal
body temperature during experimental procedures. The DC heater
is extremely quiet in terms of electromagnetic radiation. This is
essential in electrophysiological recordings which are very sensitive to
electromagnetic interference.
The controller uses proportional, integral, and derivative (PID)
technology in adjusting the DC voltage output. Compared with switched
on/off type controllers, PID controllers provide a much more precise and
stable control of temperature. The PID approach is also more immune to
the variation of the experimental conditions such as change in animal
size and unexpected disturbances.
The controller has dual temperature sensing inputs. One input is
used to monitor and control the animal temperature. The other is used
to monitor the temperature sensor in the heating pad to prevent the
localized hot spots under animal. The auto tuning feature of the fuzzylogic PID controller is easy to use and the manual setting of parameters
provides the extra control ability if need. The temperature resolution of
the controller is 0.1 °C. A rectal temperature probe has a 6-ft ultra-flexible
shield cable and an RTD sensor. It makes convenient and precise animal
temperature measurement.
The metal heating plates (available separately) have built-in
temperature sensors. Compatible with stereotaxic systems, the rigid,
flat surface fits under the U‑frame. Plates are washable with water and
detergent.
ATC1000 Specifications
Resolution..................................................... 0.1 °C
Accuracy......................................................... ±0.3 °C
Sensor.............................................................. RTD ∅ 2.0 mm x 25 mm
Maximum DC Output................................. 27 V, 1A
TEMPERATURE RANGE................................... Up to 45 °C
Power................................................................ 90-240 V, 50-60 Hz
DIMENSIONS.................................................... 45 x 30 x 7 cm
WEIGHT.............................................................. 11 lb (5 kg)
ATC1000
Animal Temperature Controller
REQUIRED Accessories (select one sensor and one plate)
502195
Small Heating Plate with built-in RTD sensor, 10 x 15 cm
502196 Medium Heating Plate with built-in RTD sensor, 15 x 25 cm
502197
Rectal Temperature Probe, 2 mm shaft diam., 3.5 mm ball tip
503524 Mouse Probe, 1.8 mm shaft diam., 2.5 mm ball tip
503567 Mouse Adaptor Heating Plate with built-in RTD sensor, 4x15 cm (for 502063 Stereotaxic Adaptor)
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
46
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Ventilators
CW-SAR-830/AP
The CW-MRI-1
ventilator is a small
animal ventilator
designed for use
in MRI and other
highly magnetic field
environments, though
its use is not limited to
those environments. It
offers manual or remote
operation of pneumatic,
non-metalic valves. The
CW-MRI-1 operates on the flow-time principle, dispensing a known airflow
into the lungs for a set inspiratory time to generate desired tidal volumes.
Three controls–respiratory rate, inspiratory time and flow rate–allow
for accuracy and extraordinary flexibility over a wide range of volumes,
breaths-per-minute and inspiration/expiration (I/E) ratios. The unit can
be expanded to ventilate larger animals. A source of compressed air or
helium is required for operating the pneumatic valves.
The CW-SAR-830/AP
small animal ventilator
operates in either a
volume or pressurecycled mode, meaning
that it dispenses a
designated volume of
air with each breath
or it ventilates until a
designated lung pressure
is reached. Pressurecycled ventilation
prevents hyper-inflation
of small animal lungs. In volume mode, it dispenses a known airflow into
the lungs for a set inspiratory time to generate the desire tidal volumes.
In pressure mode, a built-in, solid-state transducer monitors airway
pressure. Simply set the desired end-inspiratory pressure. This ventilator
is compatible with inhalation anaesthetics and oxygen, and it may be
expanded to ventilate larger animals.
Features
Features
l Non-metalic, pneumatic valves
l Wide tidal volume and rate range
l Safe with oxygen and anesthesia
l Internal air pump
l Direct readout of volume and rate
l Pressure or volume cylced
l Wide tidal volume and rate range
l Internal air pump
l Safe with oxygen and anesthesia
CW-MRI-1
CW-SAR-830/AP Ventilator
Ventilator
VENTILATOR Specifications
CW-MRI-1
CW-SAR-830/AP
RESPIRATORY RATE RANGE
5-150 breaths/min
5-200 breaths/min
TIDAL VOLUME RANGE
0.1-30 mL
0.2-35 mL (using internal valves. External valve
assemblies available for larger animals)
INSPIRATION TIME RANGE
0-5.00 seconds
INSPIRATION/EXPIRATION RANGE
20-80%
INTERNAL AIR PUMP CAPACITY
4 LPM
INSPIRATORY FLOW RANGE
50-1000 mL/min
0-1000 mL/min
0-50.0 cmH2O
PRESSURE CONTROL RANGE
POWER
120/240V (switchable), 100VA
120/240VAC, selectable
DIMENSIONS
9x5.5x9” (23x14x23cm)
9x5.5x9” (23x14x23 cm)
microCAPSTAR CO2 Analyzer
Features
l Use with Ventilated or unassisted animals
l End-tidal peak or continuous CO2 readings
l Low sample flow requirements, rapid response time
l Simple one-gas calibration
CW-microCAPSTAR Specifications
microCAPSTAR extends CO2 monitoring to the realm of small animals.
The advanced features, reliability and ease of operation make it the
perfect companion to the CW-SAR-830/AP small animal ventilator.
Featuring low sample requirements, rapid response time and long-term
stability, this CO2 analyzer provides accurate end-tidal or continuous
measurement of expired CO2. The LCD screen displays CO2 concentration
(instantaneous ETCO2 in either percent or mmHg), respiratory rate
measurements and trend plot of the end-tidal values. An adjustable ETCO2
alarm warns when end-tidal values fall out of the user-adjustable preset
range. Built-in diagnostics warn of plugged sample tubing or other fault
conditions.
MEASUREMENT RANGE
0-9.9% (0-76mmHg) CO2
RESPONSE TIME
75mS at 70mL/min through cell
150mS at 50mL/min sampling
MAXIMUM SAMPLE CELL PRESSURE
+5PSIg
SIGNAL OUTPUTS
BNC
POWER
120VAC/220VAC switchable, 25VA
DIMENSIONS
19x5.25x16”, 49x13x41cm
WEIGHT
10lb. (4.5kg)
CW-MICROCAPSTAR
CO2 Analyzer
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
47
PHYS IOLOGY
CW-MRI-1
PHYS IOLOGY
Precision
Stereotaxic
Instruments
for Small
Animals
● 5 mm linear movement
per revolution on each
axis
● Absolute lock at 90º
(vertical)
● Entire frame is electrically continuous, ideal
for Electrophysiology
● Accessories available for
use with a wide variety
of small animals
WPI’s Precision Stereotaxic Instrument is
built around the time-proven U-frame design
concept, providing stability, and adaptability
to most species. Precision alignment ensures
accurate placement of electrodes, micropipettes,
and other devices. It is ideal for researchers
in need of a versatile, reliable instrument for
stereotaxic procedures with small animals
Versatility of positioning
The manipulator arm controls medio-lateral
and vertical positioning via lead screws with 80
mm of travel. This allows the fastest positioning
possible, consistent with lining up the scales
easily at a given coordinate. The anteroposterior movement is controlled via a dovetail
slide movement, with 80 mm of travel possible
in each direction. A universal joint allows the
investigator to change the angle of the probe
up to 90° in either the antero-posterior or
medio-lateral planes. The locking mechanism
will hold any angle position without drift or
creep. It also provides an absolute lock at 90°
vertical.
TAXIC-600 Stereotaxic Frame
with UltraMicroPump Injection System
Easily read scales
All scales are oriented to be read easily from
the open end of the “U”. This is the position
from which most scientists prefer to work. The
numerals on the scales are clear and easy to
read. Precise alignment with facing vernier
scales gives accurate resolution to 0.1 mm.
Convenient for electrophysiology
The entire Stereotaxic frame including the
dovetails, manipulator arms and base are
electrically continuous. Grounding of the
entire frame including the base plate can be
accomplished by connecting the provided
grounding stud to earth. This is ideal for
electrophysiological studies where the animal
and surrounding structures need to be
grounded to reduce electrical noise.
Above: 502600 Precision Sterewotaxic
Frame. At right: 502603 Dual Manipulator
Stereotaxic Frame.
502600
502650
502603
502653
TAXIC-600
TAXIC-650
TAXIC-603
TAXIC-653
Precision Stereotaxic Frame with 18°Ear Bars
Precision Stereotaxic Frame with 45°Ear Bars
Dual Manipulator Stereotaxic Frame with 18°Ear Bars
Dual Manipulator Stereotaxic Frame with 45°Ear Bars
Stereotaxic Frame with 18°Ear Bars plus UMP3-1 System
Stereotaxic Frame with 45°Ear Bars plus UMP3-1 System
Dual Manipulator Stereotaxic Frame with 18°Ear Bars plus UMP3-1 System
Dual Manipulator Stereotaxic Frame with 45°Ear Bars plus UMP3-1 System
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
48
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Digital Display
Stereotaxic Instrument
PHYS IOLOGY
All scales are oriented to be read easily from
the open end of the “U”. This is the position
from which most scientists prefer to work. The
digital frame features compact linear position
sensors powered by an SR44 battery cell thus
avoiding major electromagnetic interference.
The large, easy-to-read LCD display provides a
digital readout to 0.0005”/0.01mm resolution
for all three axes and has higher precision
and reproducibility than conventional verner
scales. Built-in to the frame itself, the LCD
display saves working space and avoids
electromagnetic interference from connecting
cables. Use the “zero” reset function anywhere
along the 80 mm of travel to quick set a
reference point and directly read the distance
traveled. Chose metric or English unit settings.
The entire Stereotaxic frame including the
dovetails, manipulator arms and base are
electrically continuous. Grounding of the
entire frame including the base plate can be
502900
502950
502903
502953
TAXIC-900
TAXIC-950
TAXIC-903
TAXIC-953
accomplished by connecting the provided
grounding stud to earth. This is ideal for
electrophysiological studies where the animal
and surrounding structures need to be
grounded to reduce electrical noise.
Digital Stereotaxic Frame with 18° Ear Bars
Digital Stereotaxic Frame with 45° Ear Bars
Dual Manipulator Digital Stereotaxic Frame with 18° Ear Bars
Dual Manipulator Digital Stereotaxic Frame with 45° Ear Bars
Digital Stereotaxic Frame with 18° Ear Bars plus UMP3-1 System
Digital Stereotaxic Frame with 45° Ear Bars plus UMP3-1 System
Dual Manipulator Digital Stereotaxic Frame with 18° Ear Bars plus UMP3-1 System
Dual Manipulator Digital Stereotaxic Frame with 45° Ear Bars plus UMP3-1 System
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
49
PHYS IOLOGY
Motorized
Stereotaxic
Instrument
The StereoDrive is designed
to adapt to conventional
stereotaxic systems. It
allows for motorized,
computer-controlled
stereotaxic positioning in
all three orthogonal axes
for electrophysiology and
stereotaxic injections. Atlas
integration and intuitive
movement control enables
highly accurate, highthroughput electrophysiology
and stereotaxic injections.
Now you can toss the
reference book and atlas.
With StereoDrive, coordinates
are at your fingertips.
StereoDrive is controlled by
powerful computer software
with an integrated atlas and
logical coordinate system
(Bregma). With intuitive
navigation and probe control,
you get coordinates and atlas
visualization of the probe,
spatial atlas representation
and a host of advanced
visualization options.
NSR-StereoDrive-18 3-axis Motorized Stereotaxic System with 18° Ear Bars
NSR-StereoDrive-45 3-axis Motorized Stereotaxic System with 45° Ear Bars
If you want to upgrade your stereotaxic frame to computer-controlled motorized system, you can
either purchase motorized arms and control unit with software, or send us your manual stereotaxic
frame so we can convert it to motorized system.
NSR-StereoDrive-L 3-axis Motorized Arms with control unit and software, Left Hand
NSR-StereoDrive-R 3-axis Motorized Arms with control unit and software, Right Hand
NSR-StereoDrive-LC Conversion Package (3 motors, control unit, and software), Left Hand
NSR-StereoDrive-RC Conversion Package (3 motors, control unit, and software), Right Hand
NSR-OMNIDRIVE
Single Axis Motorized Arm, control unit, and software
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
50
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
l
i
a
R
l
t
e
n
l
l
e
a
m
r
tr u
Pa
PHYS IOLOGY
s
n
I
c
i
x
a
t
o
e
r
e
ls
a
St
m
i
n
A
e
g
r
a
for L
WPI’s Parallel Rail Stereotaxic Frame systems are heavy-duty research
instruments for large laboratory animals such as cats, monkeys, and
dogs. The solid large frame and superior rigidity ensure the precise
alignment of animals for Stereotaxic surgery, injection, and recording.
The system can adopt up to four manipulators with 100-micron
resolution on each axis. Each manipulator can smoothly moved to and
locked at any location on both parallel rails in an arrange of 20 cm.
Parallel Rail Stereotaxic Frame system for large animals include the
Parallel Rail Frame, base plate, manipulator(s), Cat/Monkey or Dog
adaptor, and swivel mount.
502227
502228
502229
502230
502231
502232
502233
502234
Stereotaxic Frame System with one manipulator for Cat and Monkey
Stereotaxic Frame System with two manipulators for Cat and Monkey
Stereotaxic Frame System with three manipulators for Cat and Monkey
Stereotaxic Frame System with four manipulators for Cat and Monkey
Stereotaxic Frame System with one manipulator for Dog
Stereotaxic Frame System with two manipulators for Dog
Stereotaxic Frame System with three manipulators for Dog
Stereotaxic Frame System with four manipulators for Dog
For more options and accessories, visit the website — www.wpiinc.com
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
51
Stereotaxic Accessories
PHYS IOLOGY
Adaptors
502063 Mouse and Neonatal Rat Adaptor
502213
Platform, Gas Anesthesia, with mouse Mask (use with 502063)
502062 Mouse Adaptor
502204 Rat Adaptor with a pair of ear bars, 18º
502226 Cat/Monkey Adaptor for 502600 series
502238 Spinal Adaptor for Rat
502060 Guinea Pig Adaptor for 502600 series
502241 Dog/Monkey Adaptor for Parallel Rail Stereotaxic instruments, with a pair of ear bars, 18º
The WPI Mouse and Neonatal Rat Adaptor (502063) employs
light, Delrin® adjustable ear bars with tapered points on one
end and thumbscrew on the other to facilitate surgery on
mice and rat pups. Adjustable ear bars may be independently
adjusted in height to level the skull. Laser engraved scales
show the vertical positions of the ear bars. A tooth bar and
nose clamp secures the nose. A well in the thick aluminum
body may be filled with dry ice and alcohol for hypothermic
anesthesia of neonatal animals. The adaptor clamps securely
on the right side of the “U” frame of the stereotaxic instrument.
When gas anesthesia is needed, a gas mask (502213) may be
mounted on the adaptor.
502241
502063
502213
502238
502062
502204
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
52
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Probe Holders
502210
Probe Holder with corner clamp
502067 Probe Holder with side clamp
502070 Cannula Holder, opens to 3.4mm
502068 Large Probe Holder, 6.5-13mm opening
502237 Extra Large Holder for Microdrill (OMNIDRILL35)
502236 Microdialysis Probe Holder, 1.5mm hole
502244 Micrometer Adjustable Electrode Holder, 10μ resolution, 25mm travel
502245 Manual Microsyringe Injection Holder, 10μ resolution, 25mm travel
PHYS IOLOGY
502068
502244
502245
502070
502235
502056
502225
502242
Ear Bars
502055 Ear
502056 Ear
502224 Ear
502225 Ear
502235 Ear
502242 Ear
Bars,
Bars,
Bars,
Bars,
Bars,
Bars,
Rat, 18º, (pair)
Rat, 45º, (pair)
Cat, 18º, (pair)
Cat, 45º, (pair)
Mouse, 60º. Non-rupture, (pair)
Rat, Hollow. 1.5mm hole through for auditory stimulation
502054
502053
Other ACCESSORIEs
502053 Mask, Gas Anesthesia, Mouse
502054 Mask, Gas Anesthesia, Rat
502213
Platform, Gas Anesthesia, with mouse Mask (use with 502063)
502243 Adjustable Stage Platform for 502600 series, 2cm high
503598 Micro-Drill, 35K RMP, 110/220VAC, w/ a set of bits
503599 Micro-Drill, 35K RMP, 240VAC, w/ a set of bits
503567 Heating Plate for 502063, 4X15cm, 5mm thick, works with ATC1000
502243
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
53
Biosensing
Sensor Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Free Radical Detection
Hydrogen Peroxide & Oxygen Sensor Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
ISO-HPO-2, ISO-HPO-100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
APOLLO 1000 One-channel Free Radical Analyzer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
TBR4100 Free Radical Analyzer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Multi-Port Measurement Chambers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Electron Spin Resonance
BIOS EN S I NG
MS300 MiniScope Electron Paramagnetic Resonance Spectrometer. . . . . . . . . . . . . . . . . . . . . . . 64
Nitric Oxide Detection
Nitric Oxide Sensor Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
ISO-NOP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
ISO-NOPNM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
ISO-NOPF. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
ISO-NOP007, ISO-NOP30. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
ISO-NOP30-L, ISO-NOP70-L. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
NSA NO Sensor Pre-Polarizer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
JUV ISO-NOP Rejuvenator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
SNAP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
GSNO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Neurotransmitter Detection
Micro C Carbon Fiber Potentiostat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Carbon Fiber Microelectrodes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Oxygen Detection
OxyMini & OxyMicro Fiber Optic Oxygen Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
ISO2 Dissolved Oxygen Meter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
pH Meters and Electrodes
pHOptica™ Fiber Optic pH System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Beetrode™ Micro pH Electrodes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
pH-Silver Low-noise combination pH electrode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
CALBUF Calcium Calibration Solutions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Dri-Ref™ Reference Electrodes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Kwik-Tip™ Ion-selective Electrodes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Liquid Ion Exchangers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
ProGuide electrode holder. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
JE671P pH meter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
54
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Sensors
Macro sensors
Species
Nitric Oxide
Hydrogen
Peroxide
Oxygen
Hydrogen Sulfide
Order Number
Iso-Nop
ISO-HPO-2
ISO-OXY-2
ISO-H2S-2
2 mm
< 5 sec
1 nM
2 pA/nM
None
Yes
None
#5436
#7325
#5435
2 mm
< 5 sec
< 100nM to 100mM
0.02 pA/nM
0.1pA/min
Yes
None
#600012
#100042
#600011
2 mm
< 10 sec
0.1%-100%
N/A
< 1%/min
Yes
None
#5378
#7326
#5377
2 mm
< 5 sec
< 5nM
2 pA/nM
Species
Nitric Oxide
Hydrogen
Peroxide
Order Number
ISO-NOPF
ISO-HPO-100
Price
Yes
None
#600016
#100084
#600015
BIOS EN S I NG
Available Diameters
Response Time
Detection Limit/Range
Sensitivity
Drift
Temperature Dependent
Physiological Interference
Replacement Sleeves (pkg of 4)
Filling Solution
Start-up Kit
Mini Sensors
Price
Available Diameters
Available Length
Response Time
Detection Limit/Range
Sensitivity
Drift
Temperature Dependent
Physiological Interference
Microsensor Cable
Available with Hypodermic Sheath
(pkg of 2)
(pkg of 3)
100 & 200 µm
4 mm
< 5 sec
0.2 nM
10pA/nM
none
slight
100 µm
4 mm
< 5 sec
< 10 nM-1mM
1 pA/nM
1.0 pA/min
slight
Yes
#91580
ISO-HPO-100H
(pkg of 3)
ISO-HPO-100L
(pkg of 3)
#91580
ISO-NOPFH
Price (pkg of 2)
Available as “L”-shaped for tissue bath ISO-NOP70L
Price (pkg of 2)
Micro Sensors for NO
Order Number
ISO-NOP30
ISO-NOP007
ISO-NOPNM
Price
Available Diameters
(pkg of 3)
(pkg of 3)
(pkg of 3)
30 µm
7 µm
100 nm
Available Length
0.5 mm, 2 mm
0.1mm, 2 mm
0.2 mm
Response Time
Detection Limit/Range
Sensitivity
Drift
Temperature Dependent
Physiological Interference
< 3 sec
1nM
1~4pA/nM
none
yes
none
< 3 sec
0.5 nM
1~4pA/nM
none
yes
none
< 3 sec
0.5 nM
0.5 pA/nM
none
some
none
Cable
#91580
#91580
#91580
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
55
Nitric Oxide Sensor Guide
All WPI NO sensors are 100% compatible with the ISO-NO Mark II (NOMK2), APOLLO 4000, APOLLO 1000,
and the new TBR4100 Free Radical Analyzer.
APPLICATIONS
in vivo
Tissue Bath
Tissue Bath
Microvessels
Microvessels
ISO-NOPF
ISO-NOP
ISO-NOP30L
ISO-NOP70L
ISO-NOP30
ISO-NOP007
ISO-NOPNM
100 & 200 µm
< 5 sec
0.2 nM
some
none
10 pA/nM
none
2 mm
< 5 sec
1 nM
yes
none
2 pA/nM
none
30 micron
< 3 sec
1 nM
yes
none
1.4 pA/nM
none
70 micron
< 3 sec
1 nM
yes
none
1.4 pA/nM
none
30 micron
< 3 sec
1 nM
yes
none
1.4 pA/nM
none
7 micron
< 3 sec
0.5 nM
yes
none
1 pA/nM
none
100 nm
< 3 sec
0.5 nM
some
none
0.5 pA/nM
none
The ideal NO sensor should be insensitive to other reactive species likely to
be present within the measurement environment. The conventional Nafion
coated carbon fiber NO sensor exhibits a large response to such species.
ISO-NOP – The original nitric
NO–3 and NO–2 Detection
oxide probe – ideal for cell cultures, cell
suspensions and many other applications
The ISO-NOP is a popular, robust and high
performance sensor encased within a 2 mm
diameter disposable stainless steel protective
sleeve. The tip of the sleeve is covered with
a NO-selective membrane. Replacement
membrane sleeves can be purchased
separately (WPI #5436) and require an
internal electrolyte (WPI #7325).
ISO-NOPNM
– The world’s
smallest nitric oxide NanoSensor, designed
for measurement of NO at the cellular level.
Ag/AgCl
Sensing
Element
Single Cell
WPI’s unique NO sensor technology utilizes a novel surface membrane
which amplifies the response to NO while eliminating responses to a vast
range of reactive species, including nitrite, absorbic acid, hydrogen peroxide,
catecolamines, and much more.
WPI
Membrane
100 nm
≈150 µm
Schematic drawing of the new integrated NO
nanosensor. (US Patent Pending)
The ISO-NOPNM NanoSensor has a tip
diameter of just 100 nm (0.1 µm) and a
detection limit for NO of less than 0.5 nM —
A simple change in experimental protocol will
enable the ISO-NOP to be conveniently used
for indirect rapid accurate determination of
nitrite (NO –2) and nitrate (NO –3) concentration
in samples. Using this method a detection
limit for NO –2 or NO –3 as low as 1 nM is
routinely possible.
Abdominal X-ray showing the appratus
consisting of two customized ISO-NOP nitric
oxide probes, 4-channel pH catheter, and
Teflon nasogastric tube. (Courtesy Prof. K.E.L.
McColl, University Department of Medicine
and Therapeutics, Western Infirmary, Glasgow,
Scotland.) Iijima, K., et al. Gastroenterology
2002: 122: 1248-1257.
ISO-NOP
5435
5436
7325
7521
5399
7357
Replacement 2 mm shielded sensor and cable
ISONOP Startup Kit (recommended with first purchase)
Replacement Sleeve Kit for 2 mm sensor, pkg of 4
ISO-NO Electrolyte (10 mL)
ISO-NO Electrolyte, CO2-insensitive (10 mL)
T-Adapter Kit (pkg of 3) for ISO-NOP
Nitrite Standard Solution, 1 gram/liter (100mL)
making it indisputably the smallest and most
sensitive NO sensor in the world!
The ISO-NOPNM is based on a novel design
in which an electrochemically “activated”
composite graphite nanofibre is used as
the NO-sensing element. The surface of the
NanoSensor is then modified using a unique
multi-layered NO-selective membrane. Figure
at right illustrates the response of the ISONOPNM following successive additions of
nanomolar concentrations of NO. The ultralow noise of the ISO-NOPNM (0.5 pA) enables
a detection limit of just 0.5 nM NO. The
response time of ISO-NOPNM is less than 3
seconds.
ISO-NOPNM
91580
SNAP50
800
Current / pA
BIOS EN S I NG
Selectivity of WPI’s NO sensors
Current / pA
SENSOR
SENSOR DIAMETER
RESPONSE TIME (with NOMK2)
LOWEST DETECTION LIMIT
TEMPERATURE SENSITIVITY
DRIFT
SENSITIVITY
PHYSIOLOGICAL INTERFERENCE
Cell Cultures,
NO2- , NO3- ,
y = 0.5968x + 6.4967
R2 = 0.9973
600
400
200
0
0
300
600
900
1200
Concentration / nM
Time / S
Amperometric response of the NO nanosensor (ISONOPNM) to the successive additions of 2nM, 4 nM,
8 nM NO into 0.1 M PBS (pH=7.4).
100 nm NanoSensor, pkg of 3 (requires cable #91580)
Microsensor Adapter Cable
SNAP, 50 mg vial
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
56
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
ISO-NOPF – unique flexible NO
ISO-NOPF electrodes are the newest addition
to WPI’s nitric oxide sensor family and are
available in 100 µm and 200 µm diameters.
Utlilzing the latest advances in nanotechnology and material science, scientists at
WPI’s Sensor Laboratory have created these
completely flexible and virtually unbreakable
NO sensors. The new sensors are based on
a composite graphite NO-sensing element
combined with a reference electrode. The
surface of the sensor is then coated with a
unique multi-layered NO-selective membrane.
Sensor Body
60 mm x < 2 mm diam. Ag/AgCl
50 pA
Current (pA)
sensor! Designed for arteries, microvessels,
in vivo applications, and similar
applications.
8 nM
10 sec
100 µm
or
200 µm
4 nM
2 nM
1 nM
5 mm
2 mm
Time (s)
ISO-NOPF100
ISO-NOPF200
91580
SNAP50
100 µm Flexible NO Sensor, pkg of 2
200 µm Flexible NO Sensor, pkg of 2
Microsensor Adapter Cable
SNAP, 50 mg vial
300 pA
20 sec
1600
Current / pA
7 µm
or
30 µm
Current (pA)
The ISO-NOP007 and ISO-NOP30 have recently been improved in
design and performance. The ISO-NOP007 has a tip diameter of just
7 microns and a length of 2 mm. The ISO-NOP30 has a tip diameter
BIOS EN S I NG
of 30 microns and is available in two different tip lengths (i.e., ISONOP3020 has tip length of 2 mm, ISO-NO3005 has tip length of
0.5 mm). The response of the ISO-NOP007 and ISO-NOP30 is linear
over a wide dynamic concentration range of NO. The design of
both electrodes is based on a single carbon fiber coated with WPI’s
NO-selective membrane. A detection limit of approximately 1 nM NO
makes these electrodes ideal for use in tissues and microvessels.
performance — ideal for tissues and microvessels
2 mm
or
0.5 mm
Schematic drawing of ISO-NOPF.
Response of ISO-NOPF to NO.
ISO-NOP007
ISO-NOP30 – 7 and 30 micron sensors with exceptional
Sensor Body
Ag/AgCl
60 mm x < 2 mm diam.
flexible
y = 1.3583x + 16.15
R2 = 0.9985
1200
800
400
0
0
300
600
900
1200
Concentration / nM
Time (s)
2 mm
Schematic drawing of ISO-NOP007 and ISONOP30.
ISO-NOP007
ISO-NOP3020
ISO-NOP3005
91580
SNAP50
The response of a 7 µm NO sensor (ISO-NOP007)
to successive additions of NO (100 nM). Inset shows
the linearity of the resulting calibration plot.
7 µm Nitric Oxide Sensor (pkg of 3)
30 µm Sensor Tips (2 mm length), pkg of 3 (requires #91580)
30 µm Sensor Tips (0.5 mm fiber), pkg of 3 (requires #91580)
Microsensor Adapter Cable
SNAP, 50 mg vial
Simultaneous measurement of force (top trace) and
changes of NO concentration (lower trace) in (A)
the rat superior mesenteric artery relaxed with ACh
and (B) a small human artery relaxed with ACh
and SNAP. In this artery oxyhaemoglobin(oxyHb)
partly reversed the increase in NO concentration,
with only a small change in force. [U. Simonsen, et
al., J. Physiol., 1999, 516: 271-282.]
ProGuide
Novel electrode holder
Designed to hold WPI biosensors and any standard pH electrode,
the unique ProGuide allows the positioning of an electrode in small
sample volumes without the need for a micromanipulator. The smooth
mechanism easily moves an electrode side-to-side or up and down while
keeping it at a constant vertical angle.
The ProGuide Plus comes with a micrometer positioner which allows fine
adjustment of 0.01mm in your samples.
47520
47510
47530
47540
ProGuide
ProGuide
ProGuide
ProGuide
Positioner/Holder
Positioner/Holder with Base Plus Positioner/Holder with Micrometer
Plus Positioner/Holder with Micrometer with Base
$175
$229
$275
$329
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
57
Hydrogen Peroxide & Oxygen Sensor Guide
ISO-HPO-2
ISO-HPO-100
APPLICATION
Cell Cultures, etc.
Tissue/Microvessels Tissue Bath
Cell Cultures, etc.
SENSOR DIAMETER
2.0 mm
100 micron
100 micron
2.0 mm
RESPONSE TIME
<5 SEC (90%)
<5 SEC (90%)
<5 SEC (90%)
<10 SEC (90%)
DETECTION LIMIT
<100 nM to 100 mM
<10 nM to 1 mM
<10 nM to 1 mM
0.1 % to 100%
DRIFT
<0.1 pA/min
<1.0 pA/min
<1.0 pA/min
<1%/min
SENSITIVITY
8 pA/µM
1 pA/nM
1 pA/nM
N/A
PHYSIOLOGICAL INTERFERENCE
none
Contact WPI
Contact WPI
none
BIOS EN S I NG
Hydrogen Peroxide Sensors
Hydrogen Peroxide is produced in biological systems by controlled
pathways at low concentrations that impact on cell signaling. At higher
concentrations inflammatory cells produce local intense amounts
of this oxidant to kill pathogens. In the progress of human disease,
uncontrolled formation of hydrogen peroxide from the mitochondrial
respiratory chain and enzymes, such as xanthine oxidase, can occur
(Prof. Victor Darley-Usmar, Univ. of Alabama, personal communication).
Despite the recognized importance of this oxidant in biology real-time
measurements at low concentration have been difficult. The hydrogen
peroxide sensors developed by WPI are designed to compliment
existing high sensitivity fluorescent approaches with direct quantitative
measurement in biological samples in the low nM range.
Two hydrogen peroxide sensors are currently available. The ISOHPO-2 is a 2.0 mm stainless steel sensor, with replaceable
membrane sleeves (#600012) and an internal refillable
electrolyte (#100042). The sensor is designed
for use in cell cultures and
similar
ISO-HPO-2
ISO-NOP30-L
ISO-NOP70-L
ISO-HPO-100-L
ISO-NOPF200-L10
ISO-HPO-100-L
ISO-OXY-2
applications. The graph below Illustrates the linearity of response
of the sensor following successive increases in hydrogen peroxide
concentration in solution.
The ISO-HPO-100 is a 100 micron tip diameter hydrogen peroxide
ISO-HPO-100
micro sensor designed for use in tissues and similar applications.
The sensor design is based on a flexible “activated” carbon fiber
sensing electrode coated with a proprietary membrane that enhances
hydrogen peroxide detection.
Both sensors incorporate WPI’s proprietary combination electrode
technology whereby the hydrogen peroxide sensing element and
separate reference electrode are encased within a single Faradayshielded probe design. This design has been shown to enhance
performance during measurements and minimizes overall sensor size.
600011
ISO-HPO-2
ISO-HPO-100
600012
100042
ISO-HPO Startup Kit (recommended with first purchase)
2mm Shielded HPO Sensor & Cable
100 µm HPO Sensor (requires #91580), pkg of 3
Replacement Sleeve Kit for ISO-HPO-2, pkg of 4
ISO-HPO-2 Electrolyte (10 mL)
Oxygen Sensors
FORT-100 Transducer
Micrometer
Connect to
Microsensor
Cable #15810
L-shaped sensors for tissue bath &
cell culture studies
The ISO-NOP30-L is a unique
Held in micromanipulator
L-shaped nitric oxide sensor
3 mm
designed specifically for use in
carbon fiber
tissue bath studies and similar
10 mm
applications (e.g., see WPI’s
MYOBATH). The shape of the
sensor has been engineered
Bath
to facilitate placement of the
≥ 10 mL
electrode within the lumen of
the tissue vessel under study.
The ISO-NOP70-L is similar in
construction to the ISO-NOP30
but with the advantage of having
a flexible tip (70 µm diameter).
L-shaped NO sensor used with
The ISO-NOPF200-L10 is designed Myobath.
specifically for cell culture studies.
ISO-NOP30-L
NO Sensor, L-Shaped 30-micron (pkg of 3)
ISO-NOP-70-L
NO Sensor, L-Shaped 70-micron (pkg of 2)
ISO-NOPF200-L10 NO Sensor, 200 µm Flexible L-shaped (pkg of 2)
ISO-HPO-100-L HPO Sensor, L-Shaped 100-micron (pkg of 2)
91580
Microsensor Adapter Cable
The ISO-OXY-2 is a 2.0 mm stainless steel sensor, with replaceable
membrane sleeves (#5378) and an internal refillable electrolyte
(#7326). The sensor is similar in design to WPI’s popular OXELP
oxygen sensor (see page 55).
ISO-OXY-2
5377
5378
7326
2 mm Shielded Oxygen Sensor & Cable
ISO-OXY Startup Kit (recommended with first purchase)
Replacement Electrode Sleeve Kit, pkg of 4
ISO2 Filling Solution (electrolyte)
Temperature Sensor
The temperature sensor (#ISO-TEMP-2) is based on a 2.0 mm
tip diameter high quality miniature platinum RTD (Resistance
Temperature Detector) electrode. This design has been shown to
provide greater accuracy, stability and interchangeability during
temperature measurements than traditional thermistor and
thermocouple sensors. The ISO-TEMP-2 is included with the purchase
of a system.
ISO-TEMP-2 2 mm Platinum RTD Temperature Sensor (requires #91580)
91580
Microsensor Adapter Cable
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
58
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Apollo 1000
One-channel Free Radical Analyzer
Separate inputs for temperature and
amperometric or potentiometric
(pH and other voltage sensors)
provides versatility for a wider
array of sensors.
Outputs for sensor current and poise
voltage allow XY plots for polarography
Easy-to-use
The Apollo 1000 is a single-channel, non-isolated free radical analyzer
with extremely quiet analog outputs that allow easy integration into
nearly any experimental setup from vessel relaxation studies in a tissue
bath to complex in vivo experiments. The pathway of the sensor signal
is straightforward. The Apollo 1000 converts the sensor current signal
into a voltage at a user selectable gain passing it to an adjustable analog
filter block, the signal is then buffered and sent to the output. WPI
recommends collection of the signal with our Lab-Trax™ data acquisition
interface and Data-Trax software. Pre-configured Data-Trax Setup files for
the Apollo 1000 provide optimal settings for data collection and analysis,
software adjustments can be made to all acquisition display or analysis
options including smoothing and filter adjustments.
Accommodates a wide variety of amperometric
sensors
When performing free radical measurement, using amperometry, noise
levels are directly related to detection limit. If you are looking at Nitric
Oxide from low current output sensors it will be necessary to reduce
bandwidth (resulting in lower rise time) to reduce noise. Lower noise
reduces the risk that small currents from lower sensitivity sensors could
be masked. In species like oxygen or others where output currents are
larger and additional noise is not an issue, the Apollo 1000 has the
ability to increase the bandwidth of higher current signals for better
response.
Poise Voltage Control
The Apollo 1000 has a poise (polarization) voltage range of 0V~ ±2V.
In addition, the Apollo 1000 can allow the poise voltage to be driven
by an external signal. The split supply (+ and - voltages) together with
the external command allow cyclic voltammetry, differential pulse
polarography and a host of other electro-chemical techniques not
possible with DC poise voltages. When the Apollo 1000 is configured for
APOLLO1000
1-Channel Free Radical Analyzer System Includes meter, one sensor (specify), temperature sensor and start-up kit
INST-APOLLO
Installation and Training
LAB-TRAX-4
4-Channel Data Acquisition System
See sensors on pages 43-46.
these types of applications, it is preferable to present the data as an XY
plot. Our Data-Trax v2.0 software offers XY plotting and a variety of other
mathematical functions. This versatility makes it well suited for analysis
and display of electrochemical data.
Potentiometric input
In addition to its free radical sensor input, the Apollo1000 has a separate
potentiometric input. This input has an impedance of 1015 ohms, making
it capable of accepting pH electrodes directly without buffer amps. The
Data-Trax software incorporates a linear multipoint calibration feature
allowing the user to calibrate for linear sensors of any slope or for
logarithmic responses such as those from ion selective electrodes.
APOLLO 1000 SPECIFICATIONS
POISE VOLTAGE
Range:
Digital resolution:
± 2V
62.5μV
TRANSIMPEDANCE AMPLIFIER, CURRENT
Full Scale Ranges: ± 1μA, ± 100nA, ± 10nA, ± 5nA
Offset adjustment:
± 10 nA poise and range dependent
Low pass Filters
F0: 40 Hz 1st order; F1: 40 Hz 4th order; F2: 4 Hz 4th order; F3: 0.4 Hz 4th order
Notch Filter: Twin “T” Active Notch Filter @ 0.2Hz
Analog Output:
4V = Selected Range
Analog Output Max Current: Filters off: +5mA / -12mA,
Any filter on: ± 50mA
VOLTAGE AMPLIFIER
Range:
Input Impedance
Filters:
Analog output
Analog output max current:
± 2V
1015Ω
F0: 30 kHz 1st order; F1: 40 Hz 4th order; F2: 4 Hz 4th order; F3: 0.4 Hz 4th order
x 2 Amplification
Filters off: ± 15mA, Any filter on: ± 50mA
Power Supply
Internal Batteries:
Estimated Operating time:
External AC Adapter:
Max Charging Time:
10x 1.2V 1300mAh
120 Hours +
12V AC @ 1 Amp
234 minutes (controlled internally)
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
59
BIOS EN S I NG
Poise voltage can be controlled by
external command, allowing ramps,
pulses, and techniques other than
chronoamperometry, including
cyclic voltammetry, differential
pulse polarography — or simply
sweeping the poise voltage with a
ramp to determine concentrations
of endogenous species.
BIOS EN S I NG
Four-Channel Free Radical Analyzer
l Real-time detection using electrochemical
microsensors.
l Measure nitric oxide from < 0.3 nM to
100 µM.
l Integrated system includes one temperature
sensor, your choice of two additional sensors,
and a start-up kit.
l Measure hydrogen peroxide < 10 nM to
100 mM.
l Measure up to four different species in
the same preparation or simultaneous
measurement in four different preparations.
l Measure glucose
l Current measurement range from 300 fA to
10 µA (four ranges) permits wide dynamic
range for detection.
l Isolated architecture allows Lab-Trax
interface to simultaneously measure free
radical and independent analog data (i.e.,
ECG, BP, etc.) data on any channel.
l Wide bandwidth allows recording of fast
events.
Real-time detection and measurement of a
variety of redox-reactive species is fast and
easy using the electrochemical (amperometric)
detection principle employed in the new
TBR4100. This optically isolated four-channel
free radical analyzer has ultra low noise and
independently operated channels.
For use with WPI’s wide range of nitric oxide,
hydrogen peroxide, hydrogen sulfide and
oxygen sensors, the TBR4100 can measure
four different species simultaneously in the
same preparation. Simply plug a sensor into
any one of the input channels on the front
panel and select the current range. Poise
voltage can be selected from a range of
values tuned for optimal response from WPI
sensors. An independent output for real-time
monitoring of temperature is also included.
The TBR4100 analyzer utilizes PC-based
data acquisition via our Lab-Trax interface;
l Measure hydrogen sulfide
l Measure oxygen from 0.1% to 100%.
data traces are displayed and recorded in
real-time. The Data-Trax software comes
pre-configured for single or multiple electrode
recording; filters, gains, and smoothing are
all set for optimal results. Data can be viewed
making adjustments to smoothing and filter
settings without affecting the original stored
raw data. Electrode calibration from multiple
concentration readings can be input into the
software's Multipoint Calibration utility quickly
provides a plot and slope calculation for
electrode sensitivity determination. Alternately,
the Lab-Trax T series data interface can be
used for providing simultaneous acquisition
of Free Radical data along with other
physiological data (ECG, HR, BP, etc.) as
each of the four input channels has its own
independent input amplifier, filters, and 24-bit
converter. (See page 101 for more information
on Lab-Trax data acquisition.)
Don’t need four channels? The single-channel
TBR1025 packs the power of its big brother in a
small, economical package.
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
60
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
BIOS EN S I NG
Multipoint electrode calibration and slope determination can be quickly
derived from recorded calibration data.
TBR4100 SPECIFICATIONS
Power.......................................................100 ~ 240 VAC, 50-60 Hz, <15 W
Operating Temperature (ambient).........0 - 50°C (32 - 122°F)
Operating Humidity (ambient)...............15 – 70% RH non-condensing
Warm up Time........................................<5 minutes
Dimensions.............................................135 X 419 X 217 mm (5.25” X 16.5” X 8.16”)
Weight.....................................................1.35 kg (3 lb)
Display Functions...................................18 mm (0.7”) LCD readout, 4.5 digit
Polarization Voltage (mV)
Current input (nA, μA)
Controls...................................................Power (on/off)
Current Input Range
Polarization Voltage
Analog Output Range.............................+/- 10 V (continuous)
Analog Output Impedance.....................10 kohm
Channel to Channel Isolation.................>10 Gohm
Channel to Output Isolation...................>10 Gohm
Power Supply to AC Line Isolation.........>100 Mohm
Analog Output Drift................................<10 pA/h
Temperature Input
Number of Channels......................................1
Sensing Element.............................................Platinum RTD, 1000 Ohm
Range ..........................................................0-100°C
Accuracy..........................................................+/- 1°C
Resolution.......................................................0.1°C
TBR4100-416
TBR4100-424T
Analog Output................................................31.25 mV/°C (continuous)
Amperometric Input
Number of Amperometric Channels...............................4
Signal Bandwidth.............................................................0-3 Hz
Polarization Voltage (selectable via rotary switch)
Nitric Oxide........................................................865 mV
Hydrogen Sulfide...............................................150 mV
Hydrogen Peroxide............................................450 mV
Glucose...............................................................600 mV
Oxygen...............................................................700 mV
ADJ (user adjustable)........................................+/- 2500 mV
Polarization Voltage Accuracy.........................................+/- 5 mV
Polarization Voltage Display Resolution........................+/- 1mV
Current measurement Performance
Range
Analog Output
Noise @ 3Hz * Noise @ 0.3 Hz *
+/- 10 nA
1 mV / 1 pA
< 1 pA
< 0.3 pA
+/- 100 nA
1 mV / 10pA
< 7 pA
< 3 pA
+/- 1 μA
1 mV / 100pA
< 70 pA
< 30 pA
+/- 10 μA
1 mV / 1μA
< 700 pA
< 300 pA
*Instrument performance is measured as the (max-min) over 20 seconds
period with open input. Typical values are given at 3 Hz and 0.3 Hz
bandwidth.
Typical sensor performance with TBR4100
ISO-NOPF100 noise........................................................0.2 nM NO (<2 pA)**
**Sensor noise is measured as the (max-min) over a 20 seconds period with
the sensor immersed in 0.1 M CuCl2 solution.
Four-Channel Free Radical Analyzer with Lab-Trax 4/16 Data Acquisition System
Includes TBR4100 analyzer & power cord, Lab-Trax-4/16 data acquisition system & USB cable, 4 BNC cables,
3 electrode adapter cables, 1 temperature probe, 2 sensors of your choice, and sensor start-up kit(s), if applicable.
Four-Channel Free Radical Analyzer with Lab-Trax 4/24T Data Acquisition System
Includes TBR4100 analyzer & power cord, Lab-Trax-4/24T data acquisition system & USB cable, 4 BNC cables,
3 electrode adapter cables, 1 temperature probe, 2 sensors of your choice, and sensor start-up kit(s), if applicable
RECOMMENDED ACCESSORIES
SNAP50
SNAP S-Nitroso-N-acetyl-D,L-penicillamine, 50 mg vial
See ProGuide Electrode Positioners, page 60.
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
61
Multi-Port
Measurement
Chamber
Temperature stabilized four-port closed
chamber for measurements of nitric
oxide, oxygen hydrogen peroxide and
other species in cell culture
BIOS EN S I NG
● Four port (WPI #NOCHM-4) chamber accommodates WPI’s 2-mm
sensors for nitric oxide (ISO-NOP), oxygen (OXELP), hydrogen peroxide,
and WPI’s KWIK-TIP ion selective electrodes in combination with WPI’s
2 mm Dri-Ref™ reference electrodes.
● Two additional top ports for injection of reagents using WPI’s
MicroFil™ syringe needles
● Closed chamber design greatly reduces the surface area of the solution
exposed to air
● One top port and up to three side ports configuration provides
adequate space for convenient sample and electrode manipulation
● Temperature control through an external circulating bath
● The chamber can be used for nitric oxide and other species calibration
at temperatures from 4-40 ºC
Multi-port measurement chambers
Volume of Sample
1-3 mL
Sample Injection Ports
2 (top)
Number of Electrode Ports
4
Electrode Compatibility
Nitric Oxide Electrode
ISO-NOP
Oxygen Electrode*
OXELP*
Hydrogen Peroxide Electrode
ISO-HPO-2
Calcium Electrode
KWIKCAL-2
Hydrogen Electrode
KWIKH-2
Potassium Electrode
KWIKPOT -2
TPP (tetraphenylphosphonium) Electrode
KWIKTPP-2
Dri-Ref Electrode
DRIREF-2
SUPER-Dri-Ref Electrode
SDR2
Temperature Range of Circulating Water
4-40 ºC
Water inlet and outlet require 1/4-in. ID tubing
* Caution: Not recommended for low oxygen concentration
(<1%) measurements.
The measurement of NO and other reactive gases dissolved in solutions
will be underestimated in stirred conditions if the solution is allowed to
equilibrate with air. In the case of NO, accelerated decomposition occurs
as the result of diffusion of NO from the solution into the gas phase
and the reaction of NO with oxygen. This reaction with oxygen makes
a significant and variable contribution to NO decomposition, and hence
accuracy of measurement, at concentrations of NO between 0.1-5 µM.
These problems can now be eliminated with the use of WPI’s two-port
NOCHM or four-port NOCHM-4 closed chambers. The chambers consist
of a close fitting cap through which a NO probe (ISO-NOP) or other
electrode can be inserted. When the probe is in place and the cap is
fitted to the chamber the surface area of the solution exposed to air is
greatly reduced. Up to three optional side ports are also provided through
which an oxygen electrode* (e.g., OXELP), WPI’s hydrogen peroxide, or
KWIK-TIP ion selective electrodes in combination with WPI’s 2 mm DriRef™ reference electrodes can be inserted.
The multi-port measurement chambers can be conveniently
temperature-controlled by circulating water through the outer sleeve
of the chamber using an appropriate heating/cooling circulator bath.
The inner volume of the chamber (and hence sample volume) can be
continuously adjusted in volume from 1.0 mL to 3.0 mL and is suitable
for most cell suspension experiments.
REFERENCE
P. S. Brookes, E. P. Salinas, K. Darley-Usmar, J. Eiserich, B. A. Freeman,
V. M. Darley-Usmar, P. G. Anderson. “Concentration dependent effects
of nitric oxide on mitochondrial permeability transition and cytochrome c
release”. J. Biol. Chem. 275, 20474-9 (2000).
NOCHM-4 Four-Port Closed Chamber for use with WPI’s 2.0 mm electrodes (e.g., ISO-NOP and OXELP, etc.)
NOCHM-P Spare Plug-adapter for ISO-NOP nitric oxide electrode
800100-5 Spare Center Chamber Gasket (package of 5)
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
62
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
GSNO
S-Nitroso-N-acetyl-D,L-penicillamine
S-nitrosoglutathione
GSNO has been identified in vivo as a potential storage and transport
vehicle for NO in the body. GSNO has been used in clinical trials to
treat a form of preeclampsia and to prevent platelet aggregation. It
also has considerable potential as NO donor in medicine.
SNO
O
HO2C
NH2
N
H
H
N
CO2H
O
M.W.336.3 • C10H16N4O7S • Purity > 98% • Soluble
in water or DMSO • Storage: -20°C
A. R. Butler, Anal. Biochem. 249:1-9 (1997).
D. Nikitovic, J. Biol. Chem. 271(32), 19180-19185 (1996).
D. R. Noble, Nitric Oxide 4:392-398 (2000).
D. L. H. Williams, Acc. Chem. Res. 32:869-876 (1999).
GSNO-50 GSNO 50 mg vial
GSNO-100 GSNO 100 mg vial
Pre-polarizer
Keep extra NO sen­sors ready to use
Achieve a stable background cur­rent quickly. This small battery-powered
de­vice applies a potential to the NO electrode equivalent to the po­ten­tial
ap­plied by the ISO-NO meter. Con­se­quent­ly, a sensor which has been con­
nect­ed to the activator may be transferred to the meter for im­me­di­ate­use.
For use with all WPI NO electrodes.
NSA-3
ISO-NO Activator (for three sensors)
S
M.W. 220.2
Purity > 98% by NMR or TLC
NHAc
REFERENCES
S. C. Askew, et al. Bioorg. Med. Chem. 3, 1 (1995).
K. Fehsel, et al. J. Immunol. 155, 2858 (1995).
R. Gopalakrishna, et al. J. Biol. Chem. 268, 27180 (1993).
E. Southam, J. Garthwaite, Neurosci. Lett. 130, 107 (1991).
P. J. Henry, et al. J. Pharmacol. Exp. Therap. 248, 762 (1989).
SNAP25
SNAP50
SNAP100
SNAP, 25 mg vial
SNAP, 50 mg vial
SNAP, 100 mg vial
ISO-NOP Rejuvenator
After an ISO-NOP 2‑mm sensor is used for long periods, sensitivity may
become reduced and response time may increase. This little device can
restore ISO-NOP performance to original levels by applying an electric
waveform for a few seconds. 9v alkaline battery included.
JUV
ISO-NOP Rejuvenator
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
63
BIOS EN S I NG
REFERENCES
SNAP is a stable green
crystalline S-nitrosothiol
compound that mimics
the ac­tion of nitric oxide
in vivo. It has vasodilatory
properties and has been
shown to relax isolated
bovine coronary artery
rings by activating soluble gran­u­late cyclase. This reagent also
actuates apoptosis in mouse thy­mocytes and has been accounted for
reversible inactivation of pro­
H3C
CH3
O
tein Kinase C. SNAP can be
used for calibration of all WPI
N
COOH
NO sensors. Call for details.
BIOS EN S I NG
MiniScope Electron Paramagnetic
l Compact benchtop unit
l The accuracy of a larger EPR Spectrometer without the hefty price
l Configurable X-band range l Highly sensitive l Software included
l Automatic and manual tuning l Connects with PC via USB or RS-232
Electron Paramagnetic Resonance (EPR) spectrometery, also
known as Electron Spin Resonance (ESR), uses the natural spin of
electrons when they are exposed to external magnetic fields to
examine the atomic nature of chemical compounds in a variety
of states and in vivo. EPR is the only method to directly detect
paramagnetic species, a chemical species with at least one
unpaired electron. EPR is used by chemists, physicists, biologists,
anthropologists and many other scientists to explore such things
as free radicals (NO, NO2), transitional metal ions (Cu(II), Fe(II),
NO, Mn(II)) and reactive oxygen species (H2O2, HOCl). When
studying radicals formed or chemical reactions themselves, EPR
spectroscopy is a viable method. EPR is also used in determining
the physical structure of radicals and the orbits of their electrons.
Now, EPR/ESR research becomes more affordable. The
MiniScope MS300 gives serious scientists the accuracy of a
larger spectrometer without the hefty price tag, and its compact
benchtop case makes it a convenient fit for every laboratory. In
addition, the highly sensitive MiniScope MS300, which detects
free radicals in solutions greater than 1 µM and less than 100
nM of TEMPOL, also features a user-configurable X-band range
(between 9.3 and 9.55 GHz, 50 mW).
The MiniScope MS300 is suitable for routine and research
applications on samples up to 6mm in diameter. With both
top and bottom access, the H102 sample cavity allows for
experiments that integrate continuous flow systems of liquid
samples via quartz or Teflon tubing. This cavity is large enough
to allow 7.5 mm of access to the sample and, if required, can be
equipped with an irradiation window.
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
64
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Resonance Spectrometer
●● Software for spectrum evaluation and processing which adds
the capabilities of smoothing, base line correction and the
collection of spectra for documentation and presentation,
and export to ASCII files
Software
●● Control software allows for adjustment of measurement
●●
●●
MS300 Specifications
MicrowavE
Microwave Frequency
9.3-9.55GHz
Microwave Power
100µW – 50mW (10µW-100µW or 10µW-50mW, optional)
Accessories
Resonator
Rectangular TE102
●● Software to fully automate the equipment
●● Extended electromagnet range 0-600mT (Standard: 50-
Sensitivity
8x109 spins/0.1mT
Magnetic Field
450mT) with water cooling
●● Microwave Bridge with high power 100µW–100mW or
low power 10µW–50mW (Standard: 100µW–50mW) or
attenuation down to 40dB (Standard: 30dB)
●● Irradiation window for the sample cavity
●● Holder and positioning system for simultaneous
measurement of sample and standard
●● Coaxial connection jack for high frequency counter used to
calculate the g value of a signal
●● Glassware for aqueous samples, tissue samples or highly
viscous liquid samples
●● Dewar for cooling samples in the resonator with liquid
nitrogen
Field Modulation
5µT-0.7mT
Modulation Frequency
100kHz
Magnet Air Gap
14mm
Magnetic Field Range
50-450mT (optional 600mT)
Field Sweep
0-400mT
Stability
2µT
Homogeneity ±5µT within sample region
Sweep Time
12 seconds –1 hour
Cooling Air (optional, water)
Custom accessory kits available for alanine dosimetry, NO-Fe(II)DETC
and reactive oxygen species
Call for Price
●● Cryostat system for operating with liquid nitrogen
(103-473°K)
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
65
BIOS EN S I NG
The MiniScope MS300 comes complete with software, glassware
(guidance tube F120/1.5 for capillaries and 250-50 µL capillaries),
the sealing kit for capillaries and the connector for vessels
flushing the resonator with dry nitrogen.
parameters, automatic and manual tuning, recording of
spectra and saving data. It allows 4096 data points per
spectrum.
Analysis (calculation) software offers amplitude
calculation, integration, baseline correction, filtering,
g-value estimation and summation of spectra
Multiplot presentation software provides the ability to
overlay spectra, display spectra in series, adapt the gain,
label graphic output and export data to ASCII files
™
Records redox
currents with
carbon fiber
micro­elec­trodes
Advanced
Neurotransmitter
Detection
BIOS EN S I NG
Measures oxidizable compounds
such as catechola­mines (epi­neph­
rine, norepinephrine, dopamine),
indolamines (serotonin,
melatonin), ascorbic acid and
Fe (II) with ex­quis­ite sensitivity,
low noise and site specificity
Use with WPI electrodes — see next page
1‑picoampere to 2 mi­cro­am­peres. The built-in
carbon electrode activation feature allows the
easy re­new­al of electrode sensitivity. In ad­di­
tion, MicroC fea­tures a low-pass fil­ter and the
op­tion of ap­ply­ing DC po­ten­tial ex­ter­nal­ly. A
wide range of com­pounds can be de­tect­ed:
dopam­ine, epi­neph­rine, nore­pi­neph­rine, se­ro­
to­nin, ascor­bic acid, etc. Other com­pounds,
such as glutamate, glu­cose, ace­tyl­cho­line and
alcohol, can also be detect­ed with MicroC using
en­zyme-modified biosensors.
See Application Notes, “Carbon Fiber Microelectrodes”,
available as a PDF file which may be downloaded
from WPI”s web site.
MicroC, WPI’s low cost and elegant in­stru­ment for elec­tro­chem­i­cal
detection using carbon mi­cro­elec­trodes, will record the pres­ence and
con­cen­tra­tion of oxidizable bi­o­log­i­cal compounds in vivo and in vitro.
It also features in­her­ent­ly low noise and a sen­si­tiv­i­ty of 1 mil­li­volt
per picoampere of oxi­da­tion cur­rent. Re­sponse time to quan­tal cat­e­
chola­mine re­lease is less than 1 mil­li­sec­ond. When used with car­bon
fiber mi­cro­elec­trodes, redox cur­rent can be re­cord­ed over a range of
MICROC SPECIFICATIONS
Method
2 electrode, DC potentiostat
APPLIED POTENTIAL
0.65 V, variable ± 2.5 V
Current ranges
2000 pA, 20 nA, 200 nA, 2 µA
BANDWIDTH
1.67 Hz, 167-1000 Hz
NOISE
< 1 pA
Display
31⁄2-digit LCD display, ±2 V
Recorder Output
± 4.5 volts
Rise Time
< 1 millisecond
Electrode probe/cable length Triax shielded, 5 feet
Power
Six 1.5 volt alkaline batteries (included)
Battery Life
> 1000 hours, est.
Shipping weight
4 lb (1.8 kg)
The MicroC Potentiostat is supplied with a carbon electrode probe,
with 5 feet triax cable, which accepts 0.79 mm connector pin, and a
ref­er­ence elec­trode with a 4 mm Ag/AgCl half cell (see page 21). For
applica­tions where small­er half cells are needed, please call WPI for more
in­formation.
References
G. A. Gerhardt, “Nafion-coated electrodes with high selectivity for CNS elec­tro­chem­
is­try” Brain Re­search, 290: 390-395 (1984).
R. M. Wightman, et al., “Temporally resolved cat­e­chola­mine spikes cor­re­spond to
sin­gle ves­i­cle release from individual chromaffin cells.” Pro. Nat’l Acad. of Sci. 88:
10754-58, (1991).
Z. Zhou and S. Misler, “Action Potential-in­duced Quan­tal Secretion of Cat­e­chola­
mines from Rat Adrenal Chromaffin Cells”, J. Biol. Chem. 270; 3498-3505, (1995).
SYS-MICROC Potentiostat
MICROCP
Replacement Probe for MicroC
OPTIONAL ACCESSORIES
300305
ATP Adapter (0.031" pin to 1 mm socket)
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
66
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Carbon Fiber Mi­cro­elec­trodes
Carbon fiber microelectrodes have been used in both the detection
of ox­i­diz­able compounds (Gonon, et al., 1978; Cahill and Wightman,
1995) and extracellular single-unit re­cord­ing (Armstrong-James and
Millar, 1979). WPI’s ultra-sensitive and low-noise carbon fiber (CF)
electrodes can be ap­plied, with our Micro-C Poten­tio­stat or similar in­stru­
ments, in the electrochemical detection of cat­e­chola­mines (epi­neph­
rine, norepinephrine and dopamine), indolamines (serotonin, 5-HT or
melatonin), ascorbic acid, Fe (II), and other ox­i­diz­able compounds.
Dopamine Concentration/Response Curve
1000000
Current Output (pA)
-50
-100
0
5
10
Time (ms)
Fig. 2 — Extracellular recording using a carbon electrode in CA1
region of the hippocampus in an anesthetized rat shows ultra-low
noise (‑<5 µV‑). Cour­te­sy: Dr. Carolyn Harley of Memorial University,
Newfoundland, Canada.
References
P. S. Cahill, R. M. Whightman, Anal. Chem., 67, 2599-2605 (1995).
F. Gonon, et al., Hebd Seances Acad. Sci. Ser. 286, 1203 (1978).
M. Armstrong-James, J. Millar, J. Neurosci. Methods, 1, 279 (1979).
CARBON FIBER MICROELECTRODES, UNCOATED
CF10-100
CF10-250
CF30-50 *
CF30-100 100000
10000
1000
Diameter 10 µm
10 µm
30 µm
30 µm
Length 100 µm
250 µm
50 µm
100 µm
(pack of 5)
CARBON FIBER MICROELECTRODES, NAFION-COATED*
100
10
1
0.1
0
1
10
100
1000
10000
100000
1000000
Concentration (ng/ml)
Fig. 1 — Excellent linearity in the response of carbon fiber electrode
(CF30-500) to dopamine recorded on Micro-C. Courtesy: Drs. D.
Yeomans and X.-T. Wang, Uni­ver­si­ty of Illinois at Chicago.
Diameter Length (pack of 5)
CFN10-50 *
10 µm
50 µm
CFN10-100
10 µm
100 µm
CFN10-250 * 10 µm
250 µm
CFN30-50 * 30 µm
50 µm
CFN30-100 * 30 µm
100 µm
CFN30-250 * 30 µm
250 µm
* Built to order — allow up to 4 weeks manufacturing time.
glass insulation
1 mm O.D. glass pipette or 2 mm plastic tube
Gold-plated connector pin
0.031 in. (0.79 mm)
Carbon fiber microelectrodes, ap­prox­i­mate­ly
25-50 mm (1-2 in. ) long, feature a gold-plated
pin for con­nec­tion to the probe.
30 µ or 10 µ
carbon fiber
cement
25-1000 µm
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
67
BIOS EN S I NG
CF electrodes (diameter of 10 or 30 µm) respond with an ex­cel­
lent linear­i­ty to the oxidizable compounds (Fig. 1) and can detect
the compounds as low as 0.2 nM. While the shorter (25-100 µm) CF
elec­trodes are suitable for in vivo amperometric and voltammetric
measurements, the long­er CF electrodes provide higher sen­si­tiv­i­ty and
are especially useful for the in vitro studies (amperometric or differential
pulse voltammetry). When used with the Micro-C Potentiostat, these CF
electrodes can be ac­ti­vat­ed and re­newed in sensitivity for multiple use.
The se­lec­tive detection of cat­e­chola­mines can be achieved with our
Nafion-coated CF electrodes. For se­lec­tive detection of 5-HT and ascorbic
acid, please contact WPI for more in­for­ma­tion.
50
Potential (µV)
● Sensitive, renewable/durable and economical
carbon fiber electrodes for electrochem­i­cal
de­tection of oxidizable compounds
OxyMicro & OxyMini
A new generation of fiber optic oxygen sensors based on luminescence lifetime
The OxyMini system is optimized for process control and biotechnology
applications. The OxyMicro is designed for biological research
applications including implanting into tissues, cell cultures, profiling of
biofilms and sediment related bioassays. The measurement principle of
the sensor system is based on the detection of oxygen concentration as
a function of luminescence lifetime either in dissolved or gaseous phase
environments.
OxyMini and OxyMicro Benefits
BIOS EN S I NG
●Oxygen is not consumed during the experiment
Measurement Principle
Conventional fiber-optic oxygen sensor systems based on intensity
measurements are limited in their accuracy by light source stability
and ambient light fluctuations. Using a luminescence lifetime detection,
measurements are not affected by light source stability, intensity
fluctuations caused by fiber bending or changes of the optical properties
of the sample (turbidity, refractive index, coloration, etc.). These
advantages make WPI’s OxyMini and OxyMicro the most advanced and
reliable fiber-optic oxygen system available.
●Immune to electrical and magnetic interference
●Excellent long-term stability
●No lengthy polarization necessary (e.g., as Clark-type oxygen
electrodes require)
●Fast response time < 0.5 s for MicroTip sensors
●Probe size of MicroTip sensors as small as 50 µm
●Measurement is feasible in dry gas
●Optical isolation of sensor tip available for fluorescent or
photosynthetically active samples
Calibration: The sensors can be calibrated by a simple two point
calibration, 100% air-saturation and 0% air saturation.
OxyMicro systems
MicroFlow
The OxyMicro is a single channel fiber optic oxygen meter for WPI’s fiber
optic oxygen microsensors. Applications include:
●Oxygen profiles of marine sediment, soils, or tissue
●Implantation into living tissue (e.g., heart or muscle tissue)
●Control of cell culture media in Biotechnology.
The MicroFlow fiber optic oxygen sensor
(WPI #501657) is a miniaturized fiber
optic chemical sensor optimized for fast
response time (t90 < 1 sec in gases, < 5 sec in liquids). The tiny probe
has a tip size of 50 µm and is integrated in a T-shape flow cell for easy
connection via Luer-Lock adapters to external tubings. Liquids (like water,
blood, etc.) can be pumped through the cell.
MicroTip
The MicroTip (WPI #501656) is a
needle-type (27 ga.) oxygen micro
sensor designed for applications where
a small tip size of 50 µm and a fast
response time (t90) of 1 s are necessary. The oxygen sensitive sensor tip
consists of 140 µm fiber tapered to a 50 µm tip. The sensor is housed
inside a stainless steel needle of 22 mm length and 0.4 mm diameter.
This allows penetration through a septum rubber or similar material.
These sensors are ideal for oxygen profiling in sediments and biofilms.
OxyMini and OxyMicro oxygen meters: The OxiMini and OxyMicro
fiber optic oxygen meters are compact, easy to transport. The instruments
are designed for in/outdoor use and can be connected to a PC via a
RS232 interface. Data can be visualized, analyzed and stored with the
supplied software. A full range of sensors covering most biomedical
applications are available.
MicroImplant
The MicroImplant fiber optic oxygen sensor
(WPI #501658) is an implantable probe (IMP)
with a tiny probe tip size 50 µm, an exposed fiber length of 5‑mm and a
jacket diameter of 900 µm. The IMP sensor was successfully implanted
in crabs, fishes and soil.
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
68
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
MiniFoil
The OxyMini is a single-channel fiber optic oxygen meter for WPI’s fiber
WPI offers the sensor material on a 5 mm diameter support disk made
of polyester. This material can be glued, for example, inside glass vials
and the oxygen concentration can be measured non-invasively and
non-destructively from outside through the wall of the flask. A plastic
fiber optic cable (WPI #501644, WPI #501645) is used to illuminate the
sensor foil. The wall of the flask must be transparent/non-fluorescent.
Response time (t90) of approximately 50 s. The material can be
implanted into animal tissues or custom-made housings.
optic oxygen minisensors. These sensors are based on 2 mm polymer
optical fibers and have a length of 2.5 m. A wide range of applications is
possible with these sensors.
●Process control: bottling plant in breweries and quality control of
packages
●Biotechnology: Control of cell culture media and non-invasive
control of bioreactors
●Implantation of oxygen sensors into soil and trees.
BIOS EN S I NG
OxyMini systems
MiniTip
This oxygen dipping probe (WPI #501641)
has a tip diameter of 4 mm and consists of
a polymer optical fiber, with an oxygen sensitive coating. The MiniTip’s
range is 0 to 100%. This robust sensor has a response time (t90) of
approximately 40 s.
MiniFlow
The MiniFlow oxygen probe (WPI #501642)
is a miniaturized fiber optic chemical sensor
integrated in a T-shape flow through cell.
The standard T-shape flow cell can be easily connected via Luer-Lock
adapters to external tubings. Liquids (e.g., water, blood, etc.) can be
pumped through the cell. The sensor has a response time (t90) of
approximately 40‑s and an excellent long-term stability.
Contact WPI or visit Web site for additional details.
Measurement Range
dissolved/gaseous
Response Time [t90]
dissolved/gaseous
Sterilization (EtOH, H2O2)
autoclavable (130°C, 1.5 atm)
Drift (100,000 datapoints, 20°C)
Accuracy (20°C)
Resolution (20°C)
Temperature Range
Probe Assembly Length
MINISENSOR SYSTEM
OXY-MINI-AOT Fiber-optic Oxygen Meter for Minisensors *
Minisensors (not interchangeable with Microsensors)
501641
MiniTip, fiber-optic oxygen sensor 501642
MiniFlow, flow-through cell with integrated planar oxygen sensor
503090
MiniSpot, planar oxygen-sensitive spot, 5 mm diam. (includes 10)
Requires #501644
501644
Polymer optical fiber with 1 SMA connector
MICROSENSOR SYSTEM
OXY-MICRO-AOT Fiber-optic Oxygen Meter for Microsensors *
Microsensors (not interchangeable with Minisensors)
501656
MicroTip, needle-type housing fiber-optic oxygen sensor
501657
MicroFlow, flow-through housed oxygen microsensor
501658 MicroImplant, implantable oxygen microsensors
*Meter contains two analog outputs and one trigger input
MiniTip
MiniFlow
MiniSpot
MicroTip
MicroFlow
MicroImplant
0-45 ppm, 0-100%
0-760 mmHg
0-45 ppm, 0-100%
0-760 mmHg
0-45 ppm, 0-100%
0-760 mmHg
0-45 ppm, 0-100%
0-760 mmHg
0-45 ppm, 0-100%
0-760 mmHg
0-45 ppm, 0-100%
0-760 mmHg
40 s
10 s
40 s
10 s
40 s
10 s
<2s
< 0.5 s
<2s
< 0.5 s
<2s
< 0.5 s
Y
N
Y
Y
Y
Y
Y
N
Y
Y
Y
Y
< 0.1%
< 0.1%
< 0.1%
< 0.3%
< 0.3%
< 0.3%
0.2%
2.75 ±0.01 ppm, 9.00 ±0.05 ppm, 220 ±0.15 ppm, 45.0 ±0.25 mmHg, 150 ±0.75 mmHg, 375 ±2.6 mmHg
-10°C to 50°C
2.5 m
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
69
Dissolved oxygen meter & oxygen electrode
Electrically isolated, the electrode can function in recording situations
where ground-referred electrodes would fail
● Measures gas and dissolved oxygen
● Low O2 consumption
● 2 mm tip
BIOS EN S I NG
Isolation prevents adverse interaction with other
electrodes and in­stru­ments. Highly accurate and stable
ISO2 mea­sures oxygen concentrations in aque­ous
solutions and in gas mixtures. Mea­sure­ment modes
are percent ox­y­gen, parts per mil­lion, and oxygen
reduction cur­rent in nanoamperes.
The lower detection limit (DL) for ISO2 (in gas­eous or
in liquid phase) is 0.1 ppm or 0.1%. Ox­y­gen con­cen­tra­
tion around 0.5 ppm or 0.5% and up can be routinely
mea­sured in the gaseous or in the liquid phases.
DL for a particular sensor tends to be different in
gaseous and liquid phases when the baseline noise
level is also dif­fer­ent. In the case of ISO2, however, the
baseline noise level is very close whether the elec­trode
is im­mersed in solution or used in the gaseous phase,
so DL for the ISO2 re­mains rel­a­tive­ly close in either
phase.
The small tip size (2 mm diameter) and low ox­y­gen
con­sump­tion of the OXELP electrode make it ide­al
for mea­sure­ments in vivo or in vitro. With a T-Adapter
(#5399), the sen­sor probe can be used also for con­tin­
u­ous-flow mon­i­tor­ing of ox­y­gen in small fluid volumes.
OXELP also fea­tures a fast response time, typically 10
sec­onds, and the rug­ged stain­less steel sleeve cov­er­
ing the sen­sor is au­to­cla­v­able. Op­tion­al BNC-to-dou­ble
banana adap­tor (#13347) and BNC cable (#500184)
allow ISO2 to be con­nect­ed di­rect­ly to your chart
record­er.
SYS-ISO2Dissolved Oxygen Meter & Electrode
OXELP Replacement Oxygen Electrode for ISO2
5378
Replacement Electrode Sleeve Kit (pkg of 4)
Four sleeves with membranes, plus 10 mL refill solution.
7326
ISO2 Filling Solution (10 mL)
5377
Replacement ISO2 Start-up Kit
Includes Calibration Bottle, 10mL Refill Solution, 1 cc Syringe, 2
Replacement Membranes Sleeves, MicroFil (28 ga.)
5399
T-Adapter Flow-Through Kit
Includes 3 female luer T’s, 3 luer lock fittings, 3 2mm gaskets,
6 male luer to 1/8-in. tubing, 3 luer lock fittings
13347
Chart Recorder Adapter (requires BNC cable) 500184 BNC Cable
ISO2 SPECIFICATIONS
MEASUREMENT MODES
% O2:
0-100%
ppm:
0-20
Current:
0-200 nA
RESOLUTION
0.1 ppm
ACCURACY± 1.5%
RECORDER OUTPUT
1000 Ω resistance for chart recorders
DISPLAY
3.5-digit LCD
POWER
2 nine-volt alkaline batteries, supplied
BATTERY LIFE
1000 hours, estimated
DIMENSIONS
8 x 4 x 2 inches (20 x 10 x 5 cm)
SHIPPING WEIGHT
5 lb (2.3 kg)
OXELP OXYGEN ELECTRODE
Also see WPI’s
temperature stabilzed
chamber, page 62.
TIP DIAMETER
2 mm
STAINLESS STEEL SLEEVE
66 mm
OVERALL LENGTH
125 mm
CABLE LENGTH
122 cm (4 feet), including BNC connector
RESPONSE TIME
10 seconds, 90% response typical
in well-stirred solution
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
70
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
pHOptica™
A novel fiber optic pH system
pHOptica™ is a pH measuring system which
uses fiber optic sensors and patented DLR
technology. This method allows referenced
measurements with single excitation to be
implemented.
Features of pHOptica Meter
Features of
pH optical sensors
●
●
●
●
●
●
No reference electrode is needed
Immune to electrical interferences and magnetic fields
Low drift
High spatial resolution due to small tip size
Measurement in very small sample volumes
Additional optical isolation of the sensor tip is available for
measurements in colored or photosynthetically active samples.
pHOptica Micro system
pHOptica Mini system
The pH Optica micro system is a single channel pH system for use with fiber optic
micro sensors. The applications include:
The pH Optica mini system is a single channel
pH system for use with fiber optic mini
sensors, foil and spot surface sensors. The
applications include:
● Penetration or implantation into living tissue (heart, muscle or animal blood
vessels).
BIOS EN S I NG
● Single-channel, compact, easy to transport fiber-optic meter for pH
measurements with miniature sensors.
● Two 12-bit, programmable analog outputs, with electrical isolation.
● One external trigger input, with electrical isolation.
● Computer with RS232 interface required for operation.
● User-friendly software saves and visualizes measured values.
● Several pHOptica meters can be connected to one computer.
● Temperature variation is recorded using a temperature sensor.
● Non-invasive and non-distractive pH
measurements from outside through flask
walls (cell culture)
● Soil implantation for pH measurement.
● Implantation into customer-made housing.
To protect the small
glass fiber tip against
breaking, suitable
housings and tubings
around it, depending
on the respective
application, were
designed.
● Online pH monitoring by flow through cells
● Dipping probe pH measurements
pH mini sensors
● OD of the dipping sensor is 4 mm. ● Sterilization of the pH sensor spots
via gamma radiation. ● The pH mini sensor meter is based on 2 mm PMMA
waveguides. ● Drift of 0.1 pH units for 10,000 measurements (4 days measurement
in the 30 sec data update mode).
Two different housings and sensor spots (sensorfoils) are offered:
Needle-Type Housing Sensor—
the glass-fiber with its pH-sensitive
tip is protected inside a stainless
steel needle (18 ga.); fiber has to
be extended during measurement;
penetration through septum.
Implantable sensor—
without any housings
implantation into animal
blood circuits; soil implantation;
implantation in customer-made
housings
pH micro sensors
● Tip size 140 micrometer.
● Drift of 0.1 pH units for 2000 measurements (16 hours
measurement in the 30 sec data update mode).
pHOptica Specifications
Data Interface RS232
Sample Rate 1 sample per second
Measuring pH Range 5-9
Resolution (at 20 °C) ± 0.03 (microsensors);
± 0.01 (minisensors)
Response Time < 1 min
Dimensions 185 x 110 x 45 mm
Weight 630 g
Power Supply 100 - 220 V AC
POF Coated with a pHSensitive Foil—Small
and robust pH dipping
sensor; no reference
electrode needed.
Flow-Through Cell
with Integrated
pH Sensor—On-line
monitoring; can be
easily connected via
Luer-Lock adapters.
Planar pH Sensitive Foils
and spots—non-invasive
and non-destructive
measurement from outside
through the wall of the
flask; online monitoring.
MINISENSOR SYSTEM (cannot be used with microsensors)
PH-OPTICA-MINI Fiber Optic pH Meter for minisensors, foils and spots
503538* pH MiniTip, fiber optic pH sensor dipping probe, disposable (4 mm OD), pkg of 3 502120* pH MiniFlow, fiber optic pH flow sensor, pkg of 3 *Requires #503110
502122**pH MiniSpot, fiber optic pH spot sensors, pkg of 10, OD 5 mm **Requires #501644
501644 Polymer Optical Fiber with 1 SMA connector
503110 Fiber Optic Cable with 1 SMA connector
MICROSENSOR SYSTEM (cannot be used with minisensors)
PH-OPTICA-MICRO Fiber optic pH meter for microsensors
502123 pH MicroTip (needle-type), fiber optic pH sensors (140 µm OD), pkg of 3 502124 pH MicroImplant, fiber optic pH implantable sensor (140 µm OD), pkg of 3 Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
71
Beetrode
BEE-CAL
®
ZBEECAL
Micro pH Elec­trodes
with 100-micron sensing tips!
3508
● NEW—IMPROVED—super-miniature, superfast
coated wire pH electrodes
● 100-micron diameter — ideal for monitoring fast
pH changes in very small places
3L
PH
PH
1
NM
H5
BIOS EN S I NG
NM
PH2
NMP
NM
BEETRODE SPECIFICATIONS
NMPH3
NMPH2B
1358
Beetrode® is a solid state pH sensor with ideal characteristics over a
wide pH range. Exhib­its a larger Eo than conventional glass electrodes.
Requires a separate ref­er­ence electrode, such as WPI’s Dri-Ref Series.
Beetrodes (except the NMPH2) connect to your pH meter via a BNCterminated cable. Bee­trodes generate mV readings on standard pH meters.
To obtain pH-scale readings on stan­dard pH meters, use BEE-CAL™, a
small, battery-operated com­pen­sa­tor (AA battery included) that adjusts the
electrode offset po­ten­tial so that Beetrodes will produce standard pH-scale
readings. (NMPH2B requires ZBEECAL.)
pH-Silver
Low-noise combination pH electrode
WPI’s pH-Silver, single/double-junction, gel-sealed Ag/AgCl
combination pH electrodes are very low noise. They are designed
for both laboratory and field use, especially for applications
involving strong magnetic fields. The unique features of these
electrodes provide unparalleled performance.
TIP DIAMETER
TIP LENGTH
BODY DIAMETER (NMPH 1, 3, 3L, 5)
BODY LENGTH (NMPH 1, 3, 5)
BODY LENGTH (NMPH 3L)
RESPONSE TIME
pH RANGE
SLOPE
RESISTANCE
SELECTIVITY
NMPH1*
Beetrode—2 mm receptacle
NMPH2
Beetrode with 1 m cable (unterminated)
NMPH2B
Beetrode w/ BNC cable, 1 m cable
NMPH3*
Dental Beetrode, 45° Bend, 2 mm receptacle
NMPH3L*
Dental Beetrode w/ 2 mm loop, 2 mm receptacle
NMPH5*
Beetrode, 2 mm receptacle
SYS-BEECAL Beetrode Offset & Cable (BNC, 2 mm pin)
ZBEECAL
Level Shifting Device
3508
BNC-to-US Standard Adapter
1358
BNC-to-2 mm Pin Adapter
JE671P
pH Meter, pH Electrode, Temp. Probe 110v AC adapter
JE671PZ
pH Meter, pH Electrode, Temp. Probe 220v AC adapter
*Requires BEE-CAL or 1358 BNC-to-2 mm Pin Cable (4-ft)
for connec­tion to a pH meter.
l Special internal fill offers full range linear temperature
compensation
l Very low sensor glass membrane resistance
l Zero and Isopotential: ~pH 7
l Compatible with almost all pH meters
PH-SILVER
JE671P
JE671PZ
Combination pH Electrode, Low Noise
pH Meter, pH Electrode, Temp. Probe 110v AC adapter
pH Meter, pH Electrode, Temp. Probe 220v AC adapter
l Superior stability
l Fast response
l Minimum sodium (alkaline) error
l pH 0 -14 full range
measurement
100 µ (0.1 mm)
2 mm (approx.), except
5 mm (approx.) on NMPH5
0.187 in. (5 mm)
1.875 in. (48 mm)
0.75 in. (19 mm)
1 s (90%) typical
0-14
Nernstian
100 kΩ (max)
No significant interference by K+, Na+, Ca++ in 0.1 to 1 M solutions
pH-Silver Specifications
Bulb Shape
Body Material / Color
Type of Reference
Sealed/Refillable
pH range
Junction Material
Junction Type
Max. Temperature
Dimensions
Cable Length
Connector
Ball
Epoxy / Blue
Ag/AgCl
Gel-Sealed
0-14
Ceramic wick
Single
80 °C
12 x 115 mm
1.0 m
BNC
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
72
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Dri-Ref™ Reference Electrodes
R
DRI
Although the internal filling solution con­tains KCI, the low flu­id leakage
means Dri-Ref may be used in combination with ion se­lec­tive elec­trodes,
in­clud­ing those for K+ and Cl-, without sig­nif­i­cant con­tam­i­na­tion from the
reference elec­trode.
450
EF-
R
DRI
The Dri-Ref electrodes are chemically re­sis­tant to strong acids and alkalines.
Dri-Ref electrodes are not suitable for use in organic sol­vents. In ad­di­tion, the
long, thin FLEXREF may be easily ma­nip­u­lated to ac­com­mo­date a difficult
ex­per­i­men­tal setup.
5
EF-
DRI R
FLEX
EF-2
SUPER-Dri-Ref
With a diameter of 2‑mm, SUPER-Dri-Ref does not leak electrolyte at all.
Exhibiting the electrical stability of a classic flow­ing junction reference cell,
this electrode exhibits low re­sis­tance and a stable half-cell po­ten­tial es­sen­tial­
ly in­de­pen­dent of sample electrolyte concentration. SUPER-Dri-Ref is ideal for
small vol­ume and low salt concentration mea­sure­ments.
REF
R2
, SD
Ref
i
r
D
EREF-L
SUP
DRI R
Only 450 µm in diameter and 1 inch long, WPI’s new DRIREF-450 reference
elec­trode can be used along with other sensors in space-restricted areas and
very small sam­ple vol­umes.
SH
EF-5
IR
DR
Luer-Tip Reference
H
-2S
The male luer fitting at the front of the DRIREF-L allows it to be easily
connected to a female luer port (see WPI’s luer fittings kit, page 160) to form
a tight seal — a very convenient installation for a flow-through system.
EF
Dri-Ref™ reference electrodes were developed by WPI to have extremely
low electrolyte leak­age properties, hence the name “Dri-Ref”. In addition to
this key feature, these electrodes exhibit stable and reproducible potential
and low resistance. Stored in KCl when not in use, they have a long life
expectancy. Low leak­age is achieved by using KONBO™, a prod­uct com­
bin­ing modern ceram­ic and con­duc­tive polymer tech­nol­o­gy, as the liq­uid
junction. Elec­trode re­sis­tance is low, an im­por­tant con­sid­er­ation when mak­
ing low-noise measure­ments.
Length
Diameter
Construction
Lead Length
CONNECTOR
Resistance (typical)
Filling Solution
ELECTROLYTE Leakage (mL/hr)
DRIREF-450
2.54 cm
450 µm
Coated Glass
30 in. (76 cm)
2 mm pin
< 5 K Ω
KCl
—
DRIREF-5
9 cm
4.7 mm
Epoxy
30 in. (76 cm)
2 mm pin
~500 Ω
KCl
~7.4×10-7
BIOS EN S I NG
R
DRI
Micro-Reference Electrode
FLEXREF
DRIREF-2
DRIREF-2SH
DRIREF-5
DRIREF-5SH
SDR2
DRIREF-450
DRIREF-L
Flexible Dri-Ref, 1.5 mm diam.
Dri-Ref, 2 mm diam.
Dri-Ref, 2 mm diam. (Short)
Dri-Ref, 4.7 mm diam.
Dri-Ref, 4.7 mm diam. (Short)
SUPER-Dri-Ref, 2 mm diam.
Micro-Dri-Ref, 450 µm diam.
Reference Electrode with Luer Tip
DRI-REF SPECIFICATIONS
DRIREF-2
13 cm
2 mm
Isoplast™
30 in. (76 cm)
2 mm pin
~2.7 KΩ
KCl
~5.7×10-8
FLEXREF
13 cm
1.5 mm
Teflon™
30 in. (76 cm)
2 mm pin
~2.7 KΩ
KCl
~5.7×10-8
SDR2
9 cm
2 mm
PVC
30 in. (76 cm)
2 mm pin
< 5 KΩ
KCl
—
DRIREF-L
7.5 cm
Standard Luer
Polypropylene
30 in. (76 cm)
2 mm pin
~500 Ω
KCl
~7.4×10-7
DRIREF-5SH
3.5 cm
4.7 mm
Epoxy
30 in. (76 cm)
2 mm pin
~500 Ω
KCl
~7.4×10-7
DRIREF-2SH
2 cm
2 mm
Isoplast™
30 in. (76 cm)
2 mm pin
~2.7 KΩ
KCl
~5.7×10-8
Isoplast is a trade mark of Dow Chemical. Teflon is a trade mark of DuPont.
Calcium Calibration Solutions
CALBUF-1
CALBUF-2
For use with calcium
electrodes
For use with calcium fluorescent indicators
A set of eight calcium buffers
covering the range of concentration
from 10-1 to 10-8 M Ca++. Each
buffer contains 20 mL of solution
and enough potassium chloride
to set the ionic strength to 0.1 M.
Limited shelf life; use within 30 days.
Concentration: 1x10-1, 1x10-2, 1x10-3, 1x10-4, 1x10-5, 1x10-6, 1x10-7,
1x10-8 M at 20°C. Limited shelf life; use within 30 days.
CALBUF-1 Kit of 8 Calcium Buffer Solutions
CALBUF-2 is especially suitable for calibrating flu­o­res­cent Ca++ in­di­ca­
tors. It provides eleven buffer stan­dards in the 10-4 to 10-8 M Ca++ range,
where­as other commonly used flu­o­res­cent Ca++ indicators have the
ap­par­ent Kd in the range of 100 to 300 nM. As with any ionic sensitive
indicator, the sensitivity range of these indicators is about 1.0 log unit
above and below the Kd. CALBUF-2 provides seven calibration points
in this sensitivity range. It has an osmolarity of 0.305, which is isotonic
with most mammalian cells.
Concentration: 1x10-8, 4x10-8, 1x10-7, 2.5x10-7, 5x10-7, 7.5x10-7, 1x10-6,
4x10-6, 1x10-5, 4x10-5, and 1x10-4 M at 20°C. Ionic strength: 0.150 M. 11
bottles, 20 mL each. Limited shelf life; use within 30 days.
CALBUF-2 Kit of 11 Calcium Buffer Solutions
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
73
Kwik-Tip
Each kit
includes three
electrode tips.
™
Ion selective electrodes
ast al!
f
,
e
­c
t
ura o­nom­i
c
c
A
ec
and
● Superior, stable PVC membrane
● Fast response
● 2mm diameter tips
BIOS EN S I NG
● Interchangeable tip holder
These highly stable electrodes ac­cu­rate­ly measure
cal­ci­um, po­tas­si­um, hydrogen and TPP ion
activity. Tips consist of 2 mm di­am­e­ter plas­tic
tubes sealed at one end with an ion-sen­si­tive mem­brane. After filling
with elec­tro­lyte so­lu­tion, the user in­serts the tube into the hold­er and
con­nects it to a pH meter. Tips and hold­ers are in­ter­change­able, so one
tip may be re­placed with an­oth­er sensitive to a dif­fer­ent ion. Replac­ing a
tip takes less than a minute. Elec­trode tips nor­mal­ly last sev­er­al months,
when stored proper­ly in sa­line so­lu­tion. When re­place­ment is neces­sary,
only the tip need be re­placed.
Kwik-Tip electrodes are available separately and as kits. Each “KWIK”
Elec­trode Holder kit includes a reus­able hold­er and three re­mov­able tips.
In addition to a 4-foot BNC ca­ble and an electrolyte filling syringe; “TIP”
Elec­trode Kits con­tain three elec­trode tips for a specific ion. A separate
ref­er­ence electrode, such as WPI’s Dri-Ref™, is also required.
If your pH meter requires a US Standard connector, also order Part
#3508 (BNC-to-US pH Standard adapter).
MicroFil filling
syringe (included).
COMPLETE KITS
KWIKCAL-2 Holder & 3 Calcium Electrodes
KWIKH-2 Holder & 3 Hydrogen Electrodes
KWIKPOT-2Holder & 3 Potassium Electrodes
KWIKTPP-2Holder & 3 TPP (Tetraphenylphosphonium) Electrodes
HOLDERS AND REPLACEMENT TIPS
KWIK-2
Electrode Holder with BNC cable
TIPCA
Calcium Electrode Tips (3)
TIPH
Hydrogen Electrode Tips (3)
TIPK
Potassium Electrode Tips (3)
TIPTPP
TPP+ (Tetraphenylphosphonium) Electrode Tips (3)
ACCESSORIES
3508
BNC-to-US pH Adapter
JE671P
pH Meter, pH Electrode, Temp. Probe 110v AC adapter
JE671PZ
pH Meter, pH Electrode, Temp. Probe 220v AC adapter
Also see Dri-Ref Reference Electrodes
TIP ELECTRODE SPECIFICATIONS
Part No.
Electrode
Color
Code
Recommended
Filling
Solution
Min.
Slope /
Decade
Concentration Range
Selectivity
Coefficients (-log)
TIPCA
Green
0.1 M CaCl2
28 mV
0.1 M - 10-6.75 M
Na+ 5.5, K+ 5.4, Mg++ 4.9
TIPH
Hydrogen
Orange
1 M Citric Acid,
0.01 M NaCl, pH 5.6
54 mV
pH 5.0 - 12
Na+ 10.4, K+ 9.8, Ca++ 11.1
TIPK
Potassium
0.1 M KCl
54 mV
0.1 M - 10-4.5 M
Na+ 4.0, Ca++ 3.9, Mg++ 3.0
TIPTPP
TPP+
Calcium
Yellow
Purple
10 mM
TPP+
54 mV
0.001 M -
10-4
M
K+ 6.0
Liquid Ion Exchangers
CATIONS
ION
CATALOG NO.
H+
IE 010
K+
IE 190
Ca++
IE 200
When used in
micropipettes to
record cellular ion
concentrations,
consider using
WPI’s Duo 773
electrometer
(channel A).
SELECTIVITY COEFFICIENTS*
Na+
12.7
1.97
Mg++
—
2.95
K+
—
—
Ca++
—
2.7
USEFUL pH RANGE
2-10
4-10
SLOPE 56 mV
58 mV
LINEAR RANGE
pH 4-12
pK 0-3
APPROX. EQUIV.
—
Corning
477317
*Selectivity Coefficients are expressed here as -log
5.5
4.9
5.4
—
4-10
28 mV
pCa 1-7
ETH1001
Kij or pKij.
IE010
IE190
IE200
Hydrogen Ion Exchanger (0.1 mL)
Potassium Ion Exchanger (1.0 mL)
Calcium Neutral Ion Exchanger (0.1 mL)
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
74
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
47530 (without base)
47540 (with base)
ProGuide
47520 (without base)
47510 (with base)
Novel electrode holder
BIOS EN S I NG
Designed to hold WPI biosensors and any
standard pH electrode, the unique ProGuide
allows the positioning of an electrode in
small sample volumes without the need for
a micromanipulator. The smooth mechanism
easily moves an electrode side-to-side or
up and down while keeping it at a constant
vertical angle.
The ProGuide Plus (shown at right) comes
with a micrometer positioner which allows
fine adjustment of 0.01mm in your samples.
47520
47510
47530
47540
ProGuide Positioner/Holder
ProGuide Positioner/Holder with Base ProGuide Plus Positioner/Holder with Micrometer
ProGuide Plus Positioner/Holder with Micrometer with Base
pH Meter
Hard-to-find, classic pH meter JE671P
allows the scientist to control all the
parameters manually. Especially useful for
non-standard pH and ISE electrodes.
l All solid state design
l Low drift and high stability
l Fast input response
l Manual and automatic temperature
compensation
l Auto polarity mV measurement
JE671P SPECIFICATIONS
RANGE
pH. . . . . . . . . . . 00.00 - 14.00
mV. . . . . . . . . . . -1999 to +1999
Temp. . . . . . . . . 0.0 to +100°C
RESOLUTION
pH. . . . . . . . . . . 0.01
mV. . . . . . . . . . . 1 mV
Temp. . . . . . . . . 0.1°C
ACCURACY
pH. . . . . . . . . . . ± 0.1
mV. . . . . . . . . . . ± 0.1%
Temp. . . . . . . . . ± 0.5°C
JE671P
JE671PZ
pH Meter, pH Electrode, Temperature Probe, 110V AC Adapter
pH Meter, pH Electrode, Temperature Probe, 220V AC Adapter
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
75
Cell & Tissue Research
Special Section — Muscle Physiology
WPI recently acquired the German company Scientific Instruments
Heidelberg. This special section previews the SIH range of instruments for
muscle physiology research . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77-82
Biaxial Test System for Biomaterials
BioTester 5000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
TEER Measurement Systems
EVOM2 Epithelial Voltohmmeter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
REMS Automated Tissue Resistance Measuring System . . . . . . . . . . . . . . . . . . . . . . . . . 86
REMS Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Electrodes for Epithelial Cells
STX2 Replacement “Chopstick” Electrode Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
STX3 Adjustable Tip Spread “Chopstick” Electrode Set . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Electrodes for Endothelial Cells
CELL & TI SS U E
ENDOHM-6 Synthetic Cell, 6mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
ENDOHM-12 Synthetic Cell, 12mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
ENDOHM-24SNAP Synthetic Cell for Snapwell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
STX100 for Falcon HTS Multiwell Insert System & Corning Costar HTS Transwell-24 . . 84
MULTI-96 for Millipore Multiscreen™ 96-Well PAMPA Plate . . . . . . . . . . . . . . . . . . . . . 85
Positive Test Kits for TEER Measurement Meters and Electrodes
CaliCell-12 12mm Calibration Cell for Endohm 6/12 . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
CaliCell-24 30mm Calibration Cell for Endohm 24 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Ussing Systems
Ussing System Large Reservoir . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Ussing System Small Reservoir . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Ussing Chambers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Electrodes for Ussing System
EK1 Ussing Electrodes Kit (2 voltage, 2 current) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
EKC Extra Ussing Current Electrode (red) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
EKV Extra Ussing Voltage electrode (blue) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Multi-Channel Tissue Baths
Myobath (2-,3-, and 4-Channel Tissue Baths) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Heating Circulators
Haake DC 10-P5/U Circulating Bath . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Perfusion Systems
MPS-2 Multichannel Perfusion System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Tissue Slicers
NVSL Manual Vibroslice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
NVSLM1 Motorized Vibroslice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Peltier Temperature Controller for Vibroslice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Accessories
Rodent Brain Matrices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
FluoroDish Sterile Culture Dishes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
76
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Muscle Physiology
WPI recently acquired the German company Scientific Instruments Heidelberg and now offers its
entire line of muscle physiology products through WPI sales channels worldwide. Please contact your
local WPI office or distributor for more information.
Modular Systems for All Your Muscle Studies
The SIH product line has solutions for cellular, tissue, and whole muscle
studies, including skinned muscle fiber preparations and an instrument
for long-term culture/preservation of intact muscle. All common myomechanical studies in muscle can be done, such as isometric and isotonic
contractions, as well as eccentric contractions in skeletal muscle and afterloaded contractions in cardiac muscle. In addition, via optical techniques,
sarcomere spacing, intracellular calcium, and myosin ATP-activity may
be combined with the mechanical studies. Controlled, automated forcepCa studies are possible. These can be combined with measurement of
membrane potential and oxygen tension/consumption.
The SI-H systems are modular in design and easily expandable wherever
your research or applications may take you. The base system is formed by
an indestructible, optical force transducer (KG series) and a temperaturecontrolled tissue cuvette system. These can be simple or sophisticated
standalone systems. Or, they can be adapted to an inverted microscope
for fiber or even single cell work. A linear motor expands the reach
of mechanical studies, and optical components provide ultrastructure
information on sarcomere spacing, calcium, or ATPase activity in the
muscle fiber. Most components are sold separately so you can customize
your existing system or build your own research setup.
Intact muscle strips—The muscle tester is the allround system of choice for all mechanical studies on
intact muscle (skeletal, cardiac, or smooth) that do
not require simultaneous optical measurements. The
muscle tester does allow simultaneous recording of
membrane potential and other invasive placement
of electrodes or sensors in the bath. The system can
come with a complete muscle data recording and
analysis system (DAQ) or hardware to connect to your
own data acquisition system (MACP).
Intact muscle strips and skinned muscle
fibers—If you are planning to extend your
research into the molecular mechanisms
and biochemistry of force development on
actin-myosin interaction or the study of
ancillairy proteins such as troponins or titin,
then the Muscle Research System MKB is
your choice. This is the most stable platform
for advanced, high-end and low-force
measurements. With the optional gradient system (GRDM) and calcium
photometry, you can perform very accurate force-pCA curves in very
small volumes down to 500 µL. The cuvette system can also be cooled
to allow accurate Q10 studies while better preserving the sarcomere
ultrastructure.
If your research involves actual measurement
of the ATPase activity via fluorescence or
intracelluar calcium in intact skeletal or
cardiac muscle strips trabeculae or papillary
muscle, the Muscle Research System OPT
is the platform of choice. This system offers
an optimized light path access and special
cuvettes for high-end imaging and photometry
in combination with the mechanical studies in
both intact and skinned fibers. Both systems
are stand-alone platforms with complete data
acquisition and analysis (DAQ).
Muscle fibers on existing microscope systems—A special version
of the muscle tester for intact and skinned fiber is available for
placement on inverted microscopes. FiberMIC, a muscle tester with a
small footprint, can be outfitted with or without a linear motor to do
all the possible mechanical tests in the standalone
systems. The environment chamber of the muscle is
controlled. There is also an option for laser-controlled
fluid level to eliminate surface tension effects on
the optical path and force measurement during
sophisticated experiments. Since the optical path of the microscope is
left unobstructed, researchers can continue to use their own hardware for
advanced imaging applications on muscle preparations or fibers.
Long term culture of muscle fibers—The
Long-term Muscle Culture System allows
you to keep intact muscle fibers from skeletal
or cardiac muscle alive and working for
up to one week. The system allows all the
mechanical tests and calcium imaging on the
muscle in a sterile, gassed, closed, controlled
environment. Protein exchange, viral
transduction and RNA interference studies on
muscle are now possible in a cost-effective system. Application specialists
can help you discuss what can and has been done with this system.
Single muscle cell studies—The combination
of the optical and very sensitive KG force
transducers and a micro piezo nanomotor
makes studies on single muscle cells possible.
In the Single Cell Muscle Tester, a dual remote
controlled microtweezer system with special
biocompatible coating allows you to grasp cells
and let them work just as you did with larger
fibers or cell clusters. The system is meant to be integrated on two
micromanipulators and an (inverted) compound research microscope.
On both sides the microtweezers or microplates with tip sizes down to
20 µm are embedded in a pN sensitive transducer circuit and piezobased nanomotor with 20 nm precision. External computer control
allows you to design your length change protocols and measure optical
reponses such as confocal calcium or other live cell functional markers.
Contact us for details and to dicuss your application.
Accessories—For all of our systems the KG force transducers with
different ranges are inter-exchangeable among all platform and
amplifiers. All cuvette systems are heat controlled to 34-40°C or have a
cooling option down to 5°C or any temperature in between.
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
77
CELL & TI SS U E
SI-H Systems Offer Choices and Convenience
CELL & TI SS U E
Basic Muscle Tester
The muscle tester is a convenient platform for all standard mechanical
experiments on intact muscle preparations. The force transducer is one of
the optical KG series with ranges from 0 to 2 N and sensitivities down to
1 mN. The transducer comes with custom exchangeable tissue holders for
general purpose or specific for skeletal, cardiac or smooth muscle with or
without tendons attached. The bridge amplifier (BAM21) has integrated
heat control for one of three possible perfusion cuvettes. The base system
can be used for isometric force measurement with direct point stimulation
of the muscle with a stimulator (STIM) through the transducer and
mounting supports. Field stimulation is also possible. A very fast linear
motor (MOTTEST) can be added to replace the standard micrometer
and used in combination with one of the length control devices (LCC)
to perform isotonic and eccentric contractions. Further tests that can be
performed then include: after loaded contractions, slack test, quick stretchrelease, force-velocity studies and vibration (sinusoidal/ muscle stiffness)
studies. The muscle tester comes with a complete data acquisition
and analysis package (DAQ) for muscle physiology and mechanics.
Alternatively, a hardware control device (MACP) allows you to perform
all tests while recording the data on your own data acquisition system.
The muscle tester can also be equipped with a laser based detector of
sarcomere spacing (SARCSCR or SARCCAM).
Basic System for Isometric Force
$
MT-ORG-B Muscle Tester 14,100
System includes: Base platform, Transducer holder, digital
micrometer, Peristaltic pump, 1KG Force transducer,
Mounting supports, BAM21 bridge amplifier, Binocular scope,
Oxygenation/vacuum system, and choice of long cuvette,
short cuvette or short cuvette with optical window (for laser)
Optional Components
AOSC
Anti-oscillation unit
Eliminates resonance frequency from measurement
STIM
Stimulator, standalone
analog or digital control, +/- 45V, mono/bipolar
STIM2
Stimulator, controlled by DAS software
analog or digital control, +/- 45V, mono/bipolar
FS
Electrode for field stimulation
MOTTEST
Linear motor with power amplifier
LCU
Length control unit for slack test
quick stretch/release, constant velocity
COLU
Constant load unit, isotonic contractions
ERG
Ergometer unit for after loaded contractions
(e.g., heart muscle)
VIBU
Vibration Unit (vibration, stiffness and sinusoidal studies)
DAS
Data acquisition/analysis system (controls stimulator and all length devices)
MACP
Motor Action Control Panel (motor control when using your own DAQ)
SARCSCR
Laser based sarcomere spacing, manual
SARCCAM
Laser based sarcomere spacing with linear camera, electronic >250Hz
2025
$
2228
$
1580
Modular
Flexible
Expandable
Key Experiments
Isometric force
Isotonic force
Eccentric contractions
Constant load
$
$
338
2025
$
2025
$
2025
$
2025
$
5265
Quick stretch release
Constant velocity
Slack test
Sarcomere spacing (laser
based)
Muscle Tester Specifications
Force
0-5,10,50,100mN, 2N
Motor
7mm range, 200µm/s speed
1.5N pull Force indefinitely, 100N for 20ms
Amplifier
dedicated to KG transducer, 1-10V output
Microscope
4.5-45x (specify objective) Binocular or Trinocular scope
Stimulator
0-45V mono/bipolar, ext trigger in/out, delay 5-500ms, stimulus duration 0.1-10ms, single pulse or train mode at 0.01-100Hz
$
$
1755
3105
7290
$
$
Effect of the Anti-oscillation unit on force transducer output.
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
78
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
KG Optical Force
Transducers
— lifetime warranty
•
A force transducer series with a
range and sensitivity from the
pN to tens of newton range
•
Nearly insensitive to
temperature and light
•
Extremely linear
•
Virtually indestructible with
normal use
Different transducer bodies can be
exchanged and set and zeroed to
the same bridge amplifier at the
touch of a button. After a simple
calibration with an appropriate
weight, the system is ready for use.
Range
Noise
Compliance
Resonance
Frequency
KG2
0-2 N
250 µN
0.15 µm/mN
1.3 kHz
KG4
0-50 mN
15 µN
0.5 nm/µN
1.2 kHz
KG4A
0-20 mN
4 µN
1 nm/µN
1.2 kHz
KG7B
0-10 mN
1 µN
1.5 nm/µN
550 Hz
KG7A
0-5 mN
0.4 µN
5 nm/µN
500 Hz
KG7
0-5 mN
0.2 µN
10 nm/µN
250 Hz
KG2A
0-0.5 N
300 µN
KGxx
CELL & TI SS U E
SIH Linear Motor System
Transducer specifications
Unloaded transducer without tissue mounting device
The SIH linear motor is a very fast, precise advanced system capable
of generating strong force. It operates nearly friction free via induction
movement. The unit is overload and spray water protected.
contact us for specialty transducers with different ranges.
KGXX
MOTTEST
BAM21
AOSU
$
KG Series Force transducers
1147
$
Linear motor with power amplifier
6950
$
Bridge amplifier with heater controller
2349
$
Anti-oscillation unit
2025
Eliminates resonance frequency from measurement.
Mounting Supports include a choice of hooks, baskets, tweezers for
general purpose, skeletal (with/without tendon), smooth muscle and
cardiac muscle (papillary/trabeculae) fibers. Contact WPI for a list of
current supports.
BAM21 specifications
Bridge Amplifier
Input Configuration
Current to voltage converter
GAIN
1x,10x — Switch selectable
Output Impedance
100 W
Power
12 VDC at 3 A (wall adaptor)
Output Range
0-10 V
MOTTEST LINEAR MOTOR Specifications
Maximum travel Maximum speed
Compliance
position sensor noise
Force
7 mm
200 µm/ms (0.2 m/s)
20 µm/N
< 1 µm
100 N for 20 ms, 5 N for 2 s, 1.5 N continuous.
SIH Bridge Amplifier
BAM21, the SIH bridge amplifier has integrated heat control.
Temperature Controller
Sensor Type
RTD
Temperature Range
Ambient – 40 ºC
Accuracy
< 0.1 ºC
Element Current
0 – 2.4 A
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
79
CELL & TI SS U E
Muscle Research System
MKB
The standard muscle research system is
primarily designed for intact living muscle
preparations. It combines the versatility
of the KG transducer series with a solid
platform for mechanical and combined optical
measurements on intact muscle. The system
can also be used for skinned preparations,
thus providing one platform that spans nearly
the entire muscle physiology field. It can be
equipped with photometers, a laser diode and
a linear motor. A range of perfusion cuvettes
and temperature control options provide a wide
range of possible applications.
KEY FEATURES
l Mechanically stable platform for advanced mechanical & optical muscle studies
l Complete turnkey system
l Modular design
l Corrosion-free design (stainless steel, anodized aluminium, plastic)
KEY EXPERIMENTS
l Measure intact muscle responses to electrical stimulation or
Complete SI-H systems are
assembled from a large variety of
custom components and made to
order. Call our staff physiologist to
discuss the many options for your
experimental needs.
tetanus. Measure myomechanical properties of contracting and
relaxing muscle strips. An ergometer (ERG) can be used to perform
after-loaded contractions in heart muscle and to perform eccentric
contractions.
l
Twitch amplitude and kinetics analysis, time to peak, (50%)
relaxation velocities, starling curve, diastolic force development can
be monitored with Muscledata software.
l
A linear motor plus control units can be adapted to measure
mechanical muscle properties such as slack-test, isotonic release,
constant velocity release, stretch release, vibration and after-loaded
contractions (intact muscle) background information.
l
A gradient maker (GRDM) can be fitted for automated force-pCA
studies background information.
l
Simultaneous measurement of the sarcomere length is possible
by laser diode diffraction. This can be combined with calcium
measurement.
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
80
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Muscle Research
System OPT
KEY FEATURES
l Mechanically very stable platform for
advanced muscle studies
l Complete turnkey system
l Modular design
KEY EXPERIMENTS
l Measure muscle ATPactivity in thin muscle strips (or single skeletal
muscle cells). The time resolution of the ATPase determination
depends on the muscle and is within 5 to 20s.
l
A linear motor (MOTTEST) plus control units can be adapted to
measure mechanical muscle properties such as slack-test, isotonic
release, constant velocity release, stretch release, and vibration.
l
A gradient maker (GRDM) can be adapted for automated force-pCA
studies.
l
Simultaneous measurement of the Sarcomere length is possible
by laser diode diffraction. This can be combined with calcium
measurement.
Complete SI-H systems are
assembled from a large variety of
custom components and made to
order. Call our staff physiologist to
discuss the many options for your
experimental needs.
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
81
CELL & TI SS U E
The Muscle research system OPT
is primarily designed for advanced
optical measurements on intact and
skinned muscle fibers under good
mechanical control. The system has a
greater mechanical stability and can be
equipped with photometers, laser diode,
linear motors and very sensitive force
transducers. It can also be used for intact
muscle studies. It is recommended that
this system be placed on a vibration
isolation table or very stable platform.
FiberMIC
Single Cell Muscle Tester
The FiberMIC muscle research system is primarily designed to be placed
on an existing inverted microscope from ZEISS or OLYMPUS so it can
be combined with optical recordings of your choosing. Its primary use
is intact living muscle preparations but it can also be used for skinned
fibers. It combines the versatility of the KG transducer series with a small
compact footprint perfusion cuvette system and optical widows. Because
the system can also be used for skinned preparations, it provides one
platform that spans a wide range of muscle physiology experiments. The
microscope can be equipped with our photometers and the system comes
standard with our linear motor. The perfusion cuvette is temperature
controlled.
The Micro-Tweezer single-cell muscle tester features two remote controlled
Micro-Tweezer with 20-50 µm flat or pointed tips. The tips are coated
with a proprietary tissue compatible glue to hold the cell. One tweezer
is embedded in a KG force transducer with 0-5 mN range and 200 pN
sensitivity. The other tweezer is part of a piezo based nanomotor with
a travel of 200 µm and 20 nm precision. The amplifier controller has a
built-in anti-resonance circuit for enhanced sensitivity and reduced noise.
The system is mounted on a course/fine micromanipulator and built onto
an inverted research microscope.
20mm
CELL & TI SS U E
Micro-Tweezer tip - open
KEY FEATURES
l Mechanically stable platform for combining
advanced mechanical & optical muscle
studies
l Complete turnkey system with data
recording & analysis available. Data can
be combined with calcium or sarcomere
measurements from the microscope system.
l Cuvette system of your choice can be closed
or open for easy access
l Heat control between 30-42°C
l Linear motor for muscle length perturbation
studies
KEY EXPERIMENTS / MUSCLE Parameters
l Measure intact muscle responses to electrical stimulation or tetanus.
Measure myomechanical properties of contracting and relaxing
muscle strips. An ergometer can be used to perform after-loaded
contractions in heart muscle and to perform eccentric contractions.
l
l
Twitch amplitude and kinetics analysis, time to peak, (50%)
relaxation velocities, starling curve, diastolic force development can
be monitored with Muscledata software.
A linear motor plus control units can be adapted to measure
mechanical muscle properties such as slack-test, isotonic release,
constant velocity release, stretch release, vibration, eccentric and
after-loaded contractions (intact muscle).
ACCESSORIES
Stimulator & Tetanizer for intact muscle stimulation
Photometer for the microscope to allow intracellular calcium studies (or
use your own imaging system)
Laser controlled perfusion system for highly accurate low force
measurements
Two Micro-Tweezers, nanomotors, force transducers and front
panel of the control box. Complete system also includes two coarse
manipulators.
Micro-Tweezer
●●
●●
●●
20mm tipped jaws
Remote control open/close
Flexible mounting on existing micromanipulators
Nanomotor
●●
●●
●●
Piezo-based movement
20nm precision, 200mm travel
Remote control via analog input
Force Transducer
●●
●●
●●
KG series type 7A
0-5mN, 200pN resolution
Integrated anti-resonance circuit
Single muscle fiber held between two Micro-Tweezers
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
82
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Trans Epithelial Electric Resistance (TEER) Measurements
During the last two decades TEER measurements have
become universally established as the most convenient,
reliable and non-destructive method to evaluate and
monitor the growth of epithelial tissue cultures in vitro. The
confluence of the cellular monolayer is quickly determined
by a sharp increase in TEER. Recently there has been a
significant surge of interest in introducing a combined
electrode for resistance measurements in the Millipore
96-well PAMPA (parallel artificial membrane permeability
assay) plate.
TEER measurement technology, which was first
introduced by WPI in the mid-1980’s, has since been
perfected and expanded to include a range of TEER related
manual and automatic instrumentation.
EVOM
2™
Epithelial Voltohmmeter
● Electrically isolated meter that
plugs into a standard outlet for
continual readout without push
buttons
● Compatible with Endohm
chambers
● STX2 manual electrodes and test
electrode included with every
meter
The EVOM was the first instrument designed specifically to perform
routine Trans Epithelial Electrical Resistance (TEER) measurement in tissue
culture research. EVOM2 is the next generation, redesigned for ease of
use. The EVOM2 not only qualitatively measures cell monolayer health,
but also quantitatively measures cellular confluence. The unique electronic circuit of the EVOM2 and the included STX2 electrode detect the
confluence of the cellular monolayer. When combined with WPI’s Endohm
chamber, the EVOM2 can also be used to perform more accurate quantitative measurements
or lower resistance measurements like trans
endothelial electrical resistance measurements.
The isolated power source of the EVOM2
was specifically designed to avoid adverse
effects on tissue and the formation of electrode
metal deposits, even when it is plugged into
a standard wall outlet. Now, the EVOM2 is
always on when you need it. In addition, its
rechargeable battery allows up to 10 hours of
mobile use. The four and a half digit readout
provides a range of 1-9,999 Ω. The included
test electrode lets you calibrate the resistance
measurements for an accurate reading every time, and the voltage meter
never needs calibration. An analog BNC output is standard with the
EVOM2, providing an output port for recording data or remote display of
the EVOM2 output.
EVOM2 comes complete with the popular STX2 “chopstick” electrodes,
4 mm wide and 1mm thick. Each stick of the electrode pair contains a
silver/silver-chloride pellet for measuring voltage and a silver electrode for
passing current. The small size of each electrode is designed to facilitate
placement of the electrodes into a variety of standard cell culture wells.
EVOM2 SPECIFICATIONS
STX2
STX3
EVOM2 Epithelial Tissue Voltohmmeter (includes STX2 electrode set)
REPLACEMENTS AND ACCESSORIES
STX2
Replacement “Chopstick” Electrode Set
STX3
Adjustable Tip Spread “Chopstick” Electrode Set
3993
Electrode Adapter (for electrodes with 2 mm pins)
503540 4-Way Switchbox & Interface Cable
91736 Replacement Battery, Rechargeable NiMH
Membrane Voltage Range
±200 mV
RESOLUTION
0.1 mV
Resistance Range
0 to 9999 Ω
Resistance Resolution 1Ω
AC Square Wave Current
±10 µA nominal at 12.5 Hz
Power
Internal rechargeable 6V NiMH 2200 mAH battery with external 12 VDC supply for recharging
Nominal Battery Run Time
10 hours
BNC Output
1-10 V (1 mV/ohm)
Dimensions
19 x 11 x 6 cm (7.25” x 4.25” x 2.30”)
Weight
1.4 kg (3 lb)
Electrode Connection
RJ-11connector (telephone style)
Test Resistor
External
Environmental Range
10-38°C (50-100°F )
0-90% non-condensing relative humidity
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
83
CELL & TI SS U E
● Manual TEER measurements
of epithelial cells in 6-, 12-, and
24-well plates
TEER measurements in High Throughput
STX100
Series Electrodes
CELL & TI SS U E
● Designed for 24-well HTS plate (Corning Costar and BD
Falcon) and with 96-well plates (Millipore and BD Falcon)
● Improved accuracy down to 5 Ohm
● Sterilized with EtO, alcohol or bactericide
With the development of a High Throughput Screening (HTS) protocol
for faster drug discovery, a new line of cell culture filter plates have
been introduced by several major cell culture insert manufacturers.
These HTS plates normally have either 24 or 96 individual cell culture
inserts “bonded” together as one plate so that it can be handled by a
robot apparatus. In response to these developments, WPI has developed
an automatic REMS system and a manual electrode, STX100, for TEER
measurements using HTS plates.
STX100’s design is based on the same reliable design principle
as the universally used STX2 electrode, with several important
modifications. The size of the electrode tip has been reduced to 1.5
mm to facilitate positioning through the narrower slit of the HTS plate.
The STX100 electrode itself is constructed using a stronger material for
higher durability and maximum usage applications. The bottom section
of the electrode is shaped to fit neatly into the “keyhole” shaped filter
well. This enables the STX100 electrode to produce increased accuracy
and reproducibility of TEER readings (±5Ω) compared to the standard
STX2. Several versions of STX100 are available, designed to fit the
Corning Costar 24-well HTS plate, the Falcon 24 well HTS plate, and the
Millipore Multiscreen CaCo 96-well plate. Measurement can be directly
performed when the HTS plate is in either a common or divided
tray, reducing the possibility of contamination as well as mechanical
damage to the cultured cells.
STX100C STX100 for Corning Costar HTS Transwell-24
STX100F STX100 for Falcon HTS Multiwell Insert System
STX100M STX100 for Millipore MultiscreenTM CaCo 96-Well Plate
STX100C96 STX100 for Corning HTS 96-Well Plate
OPTIONAL ACCESSORIES
13685
Modular Cable, 7 ft
13347
Chart Recorder Adapter
2851
Standard BNC Cable, 5’2”
500184
Standard BNC Cable, 10 ft (3m)
CaliCell™
Cell culture cups with synthetic membrane for testing
STX electrodes, Endohm and Ussing chambers
It takes a long time and a lot of work to grow a batch of cells, so you will want to make
certain that your test ap­pa­ra­tus is func­tion­ing properly. The CaliCellTM provides a quick and
positive way to test STX electrodes, EVOMs, Endohm, and Ussing chamber.
The CaliCellTM is a major improvement in TEER electrode calibration. Its membrane makes
use of our unique electric current constriction technology to produce resistance readings
comparable to those obtained with real cell cultures. The CaliCellTM does not have to be
refrigerated, and can be cleaned and sterilized with alcohol. Readings will not drift over time
as long as the unit is kept in good physical condition.
CALICELL-12
CALICELL-24
12 mm Calibration Cell for Endohm-6/Endohm-12
24 mm Calibration Cell for Endohm-24
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
84
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Screening (HTS) cell culture filter plates
Multi-96
Resistance measurement with 96-well PAMPA (parallel
artificial membrane permeability assay) plates
MULTI-96 Endohm for Millipore MultiScreen 96-well PAMPA plate
Endohm™
For TEER measurement of endothelial cell cultures in individual cups
● Compatible with EVOM2
● Improved accuracy of 1-2 Ohm
● Accommodates 6mm, 12mm, 24mm cups
and Costar Snapwell cup
● Sterilized with EtO, alcohol or a bactericide
Also for use with Millicell ERS-2
Using WPI’s EVOM2 resistance meter,
Endohm chambers provide reproducible resistance measurements of
endothelial tissue in culture cups.
Transfer cups from their culture wells to
the Endohm chamber for measurement
rather than using hand-held electrodes.
The chamber and the cap each contain
a pair of concentric electrodes: a
voltage-sensing silver/silver chloride
pellet in the center plus an annular
current electrode. The height of the
top electrode can be adjusted to fit cell
culture cups of different manufacture.
Endohm’s symmetrically apposing
circular disc electrodes, situated above
and beneath the membrane, allow a
more uniform current density to flow
across the membrane than with STX2
electrodes. The background resistance
of a blank insert is reduced from 150 Ω
(when using WPI’s hand-held STX2
electrodes) to less than 5 Ω. With
Endohm’s fixed electrode geometry,
variation of readings on a given sample
is reduced from 10-30 Ω with STX2
electrodes (depending on the experience of the user) to 1-2. Compared
with other resistance measurement
methods, Endohm with EVOM2 offers a
much more convenient and economic
solution to “leaky tissue” measurement.
Because of the uniform density of the
AC square wave current from EVOM2,
errors owing to electrode polarization
or membrane capacitance are largely
eliminated. Endohm together with
EVOM2 offers the most accurate and
economical endothelial ohmmeter now
avail-able. To date, cups from Costar,
Millipore, ICN Biomedicals, and Falcon
have been tested. Endohm chambers
may be sterilized with EtO, alcohol or a
bactericide (also see: Cidex, Microsurgery section); not autoclavable.
ENDOHM-6
End­ohm for 6 mm culture cup (24 wells per plate)
ENDOHM-12
Endohm for 12 mm culture cup (12 wells per plate)
ENDOHM-24SNAP Endohm for 24 mm & Costar Snapwell™ cup (6 wells per plate)
Requires EVOM2, EVOM or EVOMX to operate
53330-01
Replacement Endohm Cable
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
85
CELL & TI SS U E
Non-cell based 96-well PAMPA assays have been
designed for predictive drug candidate testing. To
ensure that the donor/acceptor fluxes are not due to
porous or unstable hexadecane layers, the stability
of the hexadecane membrane can be tested at the
end of the incubation period by electrical resistance
measurements. To conduct the measurement a PAMPA
plate is transferred to MULTI-96. Like the other
Endohm models (designed for individual cell culture
cups), the base of MULTI-96 is a fluid- filled receptacle
for the PAMPA plates, also serving as the bottom half
of the electrode pair. Inserting the top electrode into
each well allows the user to obtain the resistance of
the synthetic membrane layer of that well. MULTI-96
provides a stable and reproducible reading of tissue
culture resistance. EVOM2 is recommended for use
with MULTI-96.
CELL & TI SS U E
Automated TEER Measuring System
The REMS AutoSampler automates measurements of electrical
resistance of transepithelial, transendothelial or Caco-2 cell
membranes being grown to confluence on microporous filters
of high throughput screening (HTS) 24- and 96-well microplates.
It is a PC-controlled, tissue resistance measurement system that
offers reproducibility, accuracy, flexibility and ease-of-operation
for this kind of measurement. Automated measurement of tissue
resistance in cell culture microplates provides the important
advantages of speed, precision, decreased opportunity for
contamination and the instant availability of measured resistance
data on a computer. These measurements are useful in
applications such as drug bioavailability studies and studies on
the mechanisms of drug transport.
The main components of the REMS AutoSampler include: the
robotic sampler that moves the electrode over each well of the
microplate, the electrode which is located on the robotic arm, a
base plate for the 24- and 96-well tray, a Windows-based data
acquisition card, the REMS interface unit and the REMS software
to operate the system on a Windows-based computer.
The REMS AutoSampler automates TEER measurements
previously made with WPI’s EVOM Epithelial Voltohmmeter.
Automated tissue resistance measurements up to 20 kΩ can
be performed on 24- or 96-well HTS microplates. Microplates
presently supported include the Corning Costar HTS Transwell-24,
Falcon HTS Multiwell insert systems, and Millipore Multiscreen™
CaCo 96-well plate.
The REMS AutoSampler is designed to facilitate integration
with other robotic systems. Special locating bars are installed on
the REMS base platform that allow other system robots to place
an HTS tray into a precise location on the REMS base.
The REMS AutoSampler will automatically measure and record
tissue resistance from a user-specified matrix of culture wells on
the microplate. According to the specified sequence, the robotic
arm moves over the identified wells taking TEER measurements.
By means of a x-y-z locating system, the electrode-containing
arm is positioned precisely and reproducibly over each well.
The ability of the REMS AutoSampler to reproducibly and
precisely locate the electrode results in highly reproducible TEER
measurements. TEER measurements are stored in the computer
as the electrode moves from one well to the next. The Windowsbased software provides user-friendly features to acquire, display
and store the tissue resistance measurements.
The REMS electrode is very compact and robust in design.
Each of two rod-shaped probes, 1.5 mm in diameter, consists
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
86
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
REMS AUTOSAMPLER SPECIFICATIONS
of a pair of electrodes: one electrode for injecting current and
the other for measuring the voltage. The use of two pairs of
electrodes eliminates the error caused by the electrode-liquid
interface. To take a measurement, the robot inserts one probe
into the center of the filter well and the other into the opening
slot of the 24- or 96-well plate. The use of AC current to
measure resistance provides several advantages over DC current,
including:
MEMBRANE RESISTANCE RANGE
0 to 2000 Ω and 0 to 20 kΩ
AC SQUARE WAVE CURRENT
+/- 20 µA @ 12.5 Hz
ELECTRODE POSITIONING
Resolution in X, Y and Z: +/- 1 mm
ELECTRODE PERFORMANCE
Repeatability in X, Y and Z: +/- 0.25 mm
ELECTRODE ARM SPEEDX- and Y-axis: 250 mm/sec
Z-axis: 247.3 mm/sec
TYPICAL MEASUREMENT TIME
24-WELL
1 min, 10 sec
● Absence of offset voltages on measurements;
SCAN PATTERN
Choice of any well pattern sampling
● There is a zero net current being passed through the membrane and therefore it is not adversely affected by a
current charge;
LINE VOLTAGE
User specified: 100/120 V or 220/240 V
DIMENSIONS
53.5 × 43.7 × 37.1 cm
(213⁄32 × 173⁄16 × 145⁄8 in.)
WEIGHT
24 kg (52 lb)
● No electrochemical deposition of electrode metal.
The REMS AutoSampler also features
a rinse and calibration check station. If
occasional rinsing of the REMS electrode
is required it may be sent to a rinse station
by pressing the rinse station button on the
menu bar.
REMS
Automated Tissue Resistance Measuring System
Includes robot sampler, data acquisition board, base plate, software with Windows
XP and Vista, and electrode for either 24-well plate (Corning Costar HTS Transwell-24
or Falcon HTS Multiwell) or 96-well plate (Millipore Multiscreen CaCo) —
SPECIFY WHEN ORDERING.
REMS-24
REMS-96
Give your HTS
system the ability to
perform REMS TEER
measurements
CELL & TI SS U E
ACCESSORIES
Replacement REMS STX Electrode for 24-well HTS Plate Replacement REMS STX Electrode for MilliporeTM 96-well Plate
Contact WPI for detailed information.
WPI’s REMS TEER measurement system is also available in a fully
customizable package that does not include the robot. The REMS-KIT
is designed to enable manufacturers and users of robotic and HTS
systems to incorporate TEER measurement capability into their own
automated protocols. Essentially the REMS-KIT provides the same
TEER measuring system as the REMS but without the robot positioner.
Control over TEER measurement is accomplished using the DDE
protocol. Virtually any Windows-compatible programming language
that uses the DDE protocol (including LabView and Visual Basic)
can be used. The REMS-KIT is designed for use with Corning Costar
HTS Transwell-24, Falcon HTS Multiwell Insert System and Millipore
MultiscreenTM CaCo 96-well plates. The system includes the following
components:
● REMS TEER electrode with 5-ft cable
● Dummy TEER electrode for training robot
● REMS TEER measurement electrode interface unit
● Windows PCI A/D data acquisition card
● Interface software using the DDE protocol
● Instruction Manual
REMS KIT Specifications
Resistance range . . . . . . . . . . . . . . . . . 0 to 20 k Ohms
Time for each measurement . . . . . . . 1 to 2.5 seconds
Minimum Configuration: Pentium processor (90 MHz) running on
Windows 95 or Windows 98 and having at least 16 Mb of RAM. 10
Mbytes of free disk space.
REMS KIT includes one electrode which fits either the Corning
Costar 24-well microplate, the Falcon 24-well microplate, or
the Millipore Multiscreen CaCo 96-well microplate.
REMS-KIT REMS Kit for Corning Costar HTS Transwell-24 or Falcon HTS Multiwell Insert System
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
87
BioTester 5000
Biaxial Test System for Biomaterials
CELL & TI SS U E
BioTester 5000 offers you a complete system for testing small
biological specimens and analyzing the test results. Skin,
ligaments, blood vessels, heart valves, sclera, membranes,
scaffolds – BioTester can examine any planar biological or
replacement tissue. Easy-to-use, yet powerful, image tracking
and analysis software delivers synchronized data, image and
video management. Data can be exported to spreadsheets or
analysis software.
●● Quick and easy sample mounting
●● High Resolution (integrated) CCD camera
●● Image tracking and analysis software included
●● Precision measurement of small samples
●● Simple USB interface for quick connection
●● User-friendly, comprehensive software
●● Real-time data analysis
BioTester 5000 Specifications
Force Capacity........................................ 500, 100, 2500, 5000 mN, 10 N, 23 N
CS-BIOTESTER5000
Biaxial Biomaterial Tester
Force Resolution....................................................................... >0.02% of full scale
Force Accuracy.................................................................................0.2% of full scale
Spatial Resolution (Actuator)...................................................................>0.1 µm
Spatial Accuracy (Actuator)...........................................................................10 µm
Spatial Resolution (Image Analysis)......................................................... 1⁄8 pixel
Force Data Rate.................................................................................................. ≤100 Hz
Image Rate...........................................................................................1280x960 - 15 Hz
1024x768 - 30 Hz
640x480 - 60 Hz
Deformation Rate....................................................................................... ≤100 mm/s (17 mm/S optional)
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
88
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Sample Mounting
Unique tungsten BioRakes easily pierce the toughest and most
delicate soft tissue samples. They provide distributed attachment sites across the geometry of the sample for uniform
attachment and deformation across the sample edges. The
sharp rakes will not damage fragile samples.
Testing
BioTester 5000 is easy to operate. To conduct a test:
1. Choose a template or set up a protocol.
2. Use the BioRakes to attach the specimen to the automatically positioned tungsten rakes.
3.Click Start Test.
CELL & TI SS U E
Software
The software features a user-friendly interface with live data
graphing and imaging. The menu-driven setup offers a virtually
limitless number of test stages and duration combinations.
Previously used tests and templates can be easily edited for
quick test designs. Live test status and data graphing provides
real-time data monitoring. Analysis data can be easily exported
to spreadsheets or other scientific modeling software.
Image analysis software is provided with the BioTester5000
to deliver synchronized data, image and video management.
Image features are easily tracked and synchronized to
measured data and export to spreadsheets or other scientific
analysis software. Images are available as JPG or AVI files
for presentation and import into other image processing
applications.
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
89
Myobath II
CELL & TI SS U E
Multi-Channel
Tissue Bath
System
System Overview
For more than 100 years pharmacologists
and physiologists have been studying cardiac and smooth muscle in tissue baths.
WPI’s multi-channel isolated tissue bath
system was developed over a period of
several years in collaboration with top cardiovascular research scientists. The result
is a feature packed, cost-effective system
for the in vitro study of vascular and nonvascular smooth muscle. Tissue holders are
also available for cardiac muscle and other
tissue preparations.
The Myobath is available in 2-, 4- and
8-channel configurations. Its modular
design allows up to four individually
mounted baths to be studied simultaneously. Multiple systems can be linked
together if more bath setups are required.
The convenient compact bench-top design
of Myobath II enables the system to be
readily located even in tight quarters. WPI’s
Custom tailored systems are sold complete
with every hook, every hanger and all of
the tubing and fittings you need to get
right to work. We provide well documented, clear assembly/operation instructions
and free telephone support in case you
encounter a problem.
SYSTEMS
MYOBATHII-2
MYOBATHII-4
MYOBATHII-8
Myobath II, 2-channel (choose 2 each — baths, positioners, tissue holders — from tables on following pages)
Myobath II, 4-channel (choose 4 each — baths, positioners, tissue holders — from tables on following pages)
Myobath II, 8-channel (choose 8 each — baths, positioners, tissue holders — from tables on following pages)
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
90
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Stands and clamps
The skeleton of WPI’s tissue bath system is constructed of a
system of bases, rods and clamps. The modular design allows
systems of almost any number of baths to be created and,
systems can be expanded at a later date. The base system is
comprised of a weighted base, four steel rods, a stabilizing bar
and a jacketed 1-liter perfusate reservoir with stand and support.
Micrometer Positioner/Tensioner
The optional Micrometer Transducer Positioner
(#47700) can be used to precisely tension
tissues and keep track of the exact position or
extension of the tissue.
CELL & TI SS U E
Positioners
47700 Micrometer Positioner/Tensioner
Tissue Bath
WPI offers five different tissue baths: 2 mL, 5 mL, 10 mL, 25 mL,
and 50 mL. This range is sufficient to cover a broad variety of
applications including those involving smaller vessels and tissues
from mice or other small animals.
Each tissue bath has 6 ports. The baths are jacketed to
maintain the temperature of the perfusate in the center well.
The jacket has in inlet and an outlet. A separate inlet with a
ceramic frit is used to aerate the perfusate. The frit is designed to
produce smaller bubbles that are less prone to strike the tissue
or supporting hangers hard enough to cause a perturbation
in the force signal. The bath is also provided with a drain port
at the bottom of the chamber, an overflow port and a fill port
positioned at the top. The overflow insures that perfusate
delivered into the bath will not overflow the chamber and
contaminate the work surface. It is also critical for automated fill
and drain operations using the optional valve bank and valve
controller.
Tissue Baths
47262
Volume
(mL)
ID
(mm)
Depth
(mm)
Real Volume
(mL)
3.87
2
12.1
33.65
47263
5
15.7
39.7
7.68
47264
10
20
42
13.19
47265
25
26
49
26.00
47266
50
32
66
53.05
Aeration
A 6-channel aeration manifold, designed to regulate the
flow of O2/CO2 mixtures, is mounted on the top of the center
stainless steel post. Four regulators (needle valves) are used to
regulate the flow of O2/CO2 to each individual tissue bath. The
remaining two regulators are used to supply O2/CO2 to the buffer
reservoir and dissection dish. The buffer reservoir holds warmed,
oxygenated buffer solution to fill the tissue baths. The tissue
baths and the buffer reservoir are jacketed and require a heating
and circulating pump to maintain the desired temperature (e.g.,
WPI #500787).
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
91
Tissue Holders
The devices that actually hold tissue for experimentation in a tissue bath
are critical to success. They need to be robust, appropriately sized and
well thought out in terms of the attachment to the tissue. Since many
different sizes and types of tissue can be used in the study of smooth
muscle, variety is also critical. WPI offers 10 different application specific
tissue support devices.
Five types of tissue holders are available for 10-50 mL organ baths
and five types of Miniature Tissue Holders are available for smaller tissue
preparations.
In many applications it is desireable to deliver electrical stimulation to
the tissue. WPI offers a series of tissue holders with built in stimulation
electrodes. Connection to the stimulation device is accomplished with low
mass connectors and wire. These ultimately connect to BNC connectors
mounted in the stabilizing par of the frame. Connections to isolators or
stimulators can then be made with standard coaxial cables.
Micrometer allows fine adjustment (0.01‑mm) of
tension on tissue sample.
Atria Holder with Stimulation
(#47250)
The AS holder is used for mounting atrial
muscle preparations. This holder is equipped
with stimulation electrodes. The tissue is
mounted onto the two S-shaped hooks
(made from 30 gauge needles), The S-hooks
measure 2 mm in diameter on both ends
with a sharp tip on one end where tissue is
pieced. The two point stimulation platinum (Pt) electrodes on
the holder are 2.54 mm (0.1in.) apart.
CELL & TI SS U E
Transducer
adapter
sleeve
Force transducer
Vascular Holder with
Stimulation (#47050)
Micro Tissue Strip Holder (#47360)
—includes point stimulation electrodes, as shown.
Micro Tissue Strip Holder (#47350)
— without stimulation electrodes
Tissue is held
under tension
between clamp
and force
transduc­er.
point stimulation
electrodes
The VS holder uses the same tissuemounting mechanism as the V holder, but
has two 5 mm flexible platinum stimulation
electrodes, which can be positioned around
the tissue. The VS holder can only be used
in the 25 mL or 50 mL baths.
Heated water outlet
Buffer in
Overflow
Oxygen aeration
inlet with built-in
bubbling frit
Tissue bath
Heated
water inlet
Drain
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
92
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
For use with FORT100
transducer and >5 mL bath
Microvessel (500600 µm (I.D.)
Micro Tissue Holder
(#47075) — For force
measurments smaller
than 5-10 g
Stainless steel
(1mm in diameter)
Micro Vessel Holder (#47330)
Stainless steel
with 250 µm wire
(250 µm in diameter)
Micro Vessel Holder (#47310)
with 125 µm wire
Serrated clamp
Micro Vessel Holder MVS1
(#47120)
Point stimulation
electrodes
(MHS 1 Only)
For vessels as small as
500-600 microns (I.D.)
CELL & TI SS U E
Stainless steel wire
(125 µm or 250 µm diam.)
FORT-100 Transducer
Micrometer
Connect to
Microsensor
Cable #15810
2 mL or
5 mL baths
Held in micromanipulator
Micro Tissue Holders
With the wide use of transgenic mice in studies of this kind, the need for
tissue support mechanisms capable of handling the extremely small size
of vessels and muscle strips harvested from small animals is paramount.
WPI offers five micro-tissue holders for use with micro tissue strips, micro
vessels and other tissues where the force measurements are less than
10 g.
Micro tissue holders are designed to be used with the 2 mL and
5 mL volume tissue baths and FORT 25 transducer. Microtissue Holders
#47350 and #47360 are designed for muscle strips as small as 0.5 mm
in width and 5 mm in length. The muscle strip is held between two
miniature vessel clips with a clamping pressure of 60 grams. These
holders are most suitable for measuring isometric force of less than
5-10 grams. #47360 differs from #47350 only in that it has an in-built
stimulation circuit and electrodes.
Micro Vessel Holders #47330, #47120 and #47130 require a tissue
bath larger than 5 mL and the use of FORT 25 or comparable transducer.
These holders are designed for studying tension in vascular rings. When
used with the micrometer driven tensioner/positioner they can also be
used for measuring the lumen diameter of vessel preparations. The
#47330 and #47120 can be used for micro vessel preparations as small
as 500-600 microns (ID). 47130 is designed for larger vessels (> 2 mm
ID). #47120 and #47130 feature specially designed spiral stimulation
electrodes fabricated from 250-micron diameter platinum wire. The twoand-a-half turns of each spiral electrode span appropriately 4-5 mm.
The positions of the spiral electrodes can be adjusted with respect to
the tissue placement, a feature that is very useful in controlling stimulus
intensity.
L-Shaped Free Radical
Sensor (nitric oxide,
hydrogen peroxide,
oxygen)
3 mm
carbon fiber
10 mm
Bath
≥ 10 mL
Holders & HOOKS
47050
Vascular Hook with Stimulation Style VS
47250
Atria Holder with Stimulation Style AS
47330
Micro Vessel Holder
47120
Micro Vessel Holder with stimulation – Style MVS1
47350
Micro Tissue Strip Holder Style MH1
47360
Micro Tissue Strip Holder with Stimulation – Style MHS1
47125-6 Transducer Hook for use with 47330 Tissue Holder
47126-12 Triangular Tissue Hook, pack of 12
47034-24 S-shaped Tissue Hook, pack of 24
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
93
Data Systems
Hardware — Lab-Trax
Transducers
FORT25, FORT10g
The rigid-lever force transducers transform applied force into proportional
voltage. Using balanced strain gauges, FORT transducers produce linear
output voltage vs. applied force input with very little deflection. The
MYOBATH II system is designed to use together with WPI’s force
transducers, including the FORT100 (100 g full scale), FORT25
(25g full scale), and FORT10g (10g full scale). These transducers
can be directly connected to either the 4-channel Transbridge™
amplifier or the more advanced 8-channel Bridge8 amplifier.
Bridge8 is the preferred amplifier for small vessel applications
because it provides additional noise filtration (0.03-10Hz). In this
way, the noise produced by increased sensitivity of the FORT10g or
FORT25 transducer can be significantly attenuated.
CELL & TI SS U E
FORT10-100
The FORT10-100 is a high sensitivity dual-range research grade force
transducer designed to measure forces in the 0.005 to 10 gram and 0
to 100 gram ranges. FORT10-100 exhibits excellent isometric properties.
In addition, its unique optical technology makes it resistant to drift and
offers intrinsically low noise characteristics. FORT10-100’s on-board
amplifiers reduce gain and adjustment requirements on recording
amplifiers to which it may be connected. 
Although the WPI tissue bath can be configured to work with any data
acquisition system, WPI’s Lab-Trax is the preferred recording platform.
Each channel in the Lab-Trax contains its own 24-bit analog-to-digital
converter, an independent stimulator output and a built-in variable
gain bridge amplifier. In addition, 8 programmable digital outputs
are provided. These are easily configured and are used to control the
automated filling and draining of individual baths. By combining all
of these functions into a 4- or 8-channel device, cost goes down and
performance goes up. The low-profile box fits virtually anywhere and
because all functions are integrated into the same instrument, system
noise is low — and best of all, the wiring hookup is reduced to plugging
in transducers and power. The bundled Data-Trax software includes dose
response software that can manage multiple runs, calculate ED-50 and
draw Schild plots.
SoftWare — Data-Trax
Grass/Narco/Kent/Harvard
WPI positioners, baths, amplifiers, and data systems are completely
compatible with sensors from Grass, Narco, Kent and Harvard.
Amplifiers
Transbridge
All of the transducers above
can be directly connected to
the 4-channel Transbridge™
amplifier. This basic device
offers 4 channels of variable
gain transducer conditioning.
Each channel has x1 x10
x100 and x1000 gain and
offset control. Bandwidth is
fixed at 1kHz.
Although the bundled Data-Trax software can be seen as a general
purpose digital chart recorder, there are many features that make
recording and analysis of isolated tissue bath data easier and less time
consuming.
The Data-Trax software allows you to easily convert voltage to real
units, such as grams or mmHg. The display allows you to toggle between
a preferred y-axis scaling (between 0 and 6 grams, for example) and
the “best view” as determined by the AutoScale feature. Alternately, you
can zoom-in or zoom-out by factors of two with a single mouse click.
In a similar fashion, x-axis scaling can be expanded or compressed by
factors of two with a single click. Where multiple channels are being
viewed simultaneously the user can define additional “Views”of the
data. For example in addition to the main or default display showing all
channels, the user might create additional views, each showing only a
few channels to allow a better online presentation of the data
While recording, you can mark your data with text messages. These
marks are searchable, and appear in the field of data to which they
apply. Marks are time locked to the record and can be used to “Go To”
any marked region of the data. They are also used post recording by the
DOSE RESPONSE software to calculate ED50 values and Draw Schild
plots.
Bridge 8/IsoDam Rack
Bridge8 is the preferred amplifier system for microvessel applications
because it provides additional signal filtration (0.03-10Hz). In this way,
the noise produced by more sensitive tansducers such as the fort 25 can
be significantly attenuated.
Record dose response.
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
94
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
ABE
Automark and extract maximum response values.
The dose response software provided is based on ABE, an open source
freeware Module written by Gordon Webster. The package as provided
has been modified to accept Data trax formated data and provide a
smooth transition from recording to analysis
ABE is written in Python 2.2 and uses the Tkinter graphic library to
generate a friendly graphical user interface (GUI) for manipulating and
visualizing the data.
For the data modeling, ABE uses the nonlinear regression routines
from the Scientific Python (SciPy) and Numeric libraries as well as the
polyfit function from Raymond Hettingers Public Domain Matfunc module
for computing the fitted polynomial coefficients from the supplied data.
Functions for computing the derivatives of the fitted polynomials, solving
polynomial roots and estimating the initial parameters for the nonlinear
regression were added by the author and are included in the body of
the main Abe module. In addition to the libraries of the standard Python
distribution therefore, only the SciPy, Numeric and Matfunc modules
need to be included in the Python path for ABE to be run. These are
provided on the Data-Trax install disk
Options
Heating Circulator
Use a custom script to build dose response graphs ...
Menu-driven control module allows
easy temperature setting, cor­rec­
tion and display. Temperature
ac­cu­ra­cy of ± 0.02°C.
Heated bath
inflow and
outflow
Fluid ports
for external
cooling
Stainless steel
bath cover
... and Shild plots.
Data-Trax also controls the built in stimulator in The WPI-118 and Tseries recorders. Pulse protocols can be created in advance, stored and
delivered automatically or on command. Pulse durations, frequencies
and amplitudes can be changed as the protocol is being delivered. The
software also offers full control of digital I/O lines that can be used to
count events, or control devices in the lab environment such as valves or
injectors. Using WPI’s AUTODRAIN together with the Data-Trax protocol
generator, the entire process of draining, filling, and drug delivery can be
automated.
Bath made from
polyphenylene
oxide (PPO)
500787
500788
500789
Haake DC10-P5/U Circulating Bath (115 V)
Haake DC10-P5/U Circulating Bath (230 V)
Haake DC10-P5/U Circulating Bath (100 V)
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
95
CELL & TI SS U E
Ideal for controlling temperatures of external systems. This heating
circulator features a polyphenyleneoxide (PPO) construction with a
powerful 17 liter per minute flow rate pump for optimum heat exchange
with a 12 mm hose. The working temperature range is 25-100°C. A tap
water cooling coil (with a working temperature range of 20-100°C) is
fitted as a standard feature. The unit comes with a stainless steel cover.
The 115 V model is equipped with a 1200-watt heater and the 230 V
model comes with a 2000-watt heater.
The bath has a volume of 5 liters and an opening of 13 x 17 x 16
cm. The overall dimensions of the unit are 16 x 33 x 36 cm. Shipping
weight: 22 lb (10 kg).
Ussing
System
Glass
cir­cu­la­tion
reservoir
#5210
For electrophysiological investigation
of epithelial transport
● Direct connect low-resistance electrodes
● Simplified operation, easy to control temperature and
clean after use
Ussing
Chamber
● Luer type leak-free attachment of tubing and electrodes
CELL & TI SS U E
● Recessed electrode ports to avoid air bubble formation
● Secure membrane holding by sharp stainless steel pins
or O-ring
● Specialized chamber adapts cell culture insert (Costar Snapwell) for monolayer cell culture
● Chambers with rectangular openings for tubular tissues
from small animals
WPI’s Ussing System offers researchers a quick, effective means of
making low-resistance electrical connections to the Ussing chamber
without need of long agar bridges or Calomel half-cells. Ag/AgCl halfcells screw into short tubes which plug firmly into place in the chamber’s
luer ports. These direct-connect elec­trodes eliminate the inconvenience
and expense of Calomel half-cells in open liquids. The System includes
one Ussing Chamber (eight sizes available), Support Stand, Electrode Kit,
Glass Circulation Reservoir (two sizes available), and a Tub­ing start-up kit
(25 feet of 0.375-in. tubing, 10 feet of 0.156-in. tubing, plus four male
luer fittings, two compressor clamps, one Y-connector, and one clip). Six­
teen possible system configurations are list­ed at right. Com­po­nents are
also avail­able sep­a­rate­ly. (Preamplifier in pho­to not included.)
Ussing Chambers
Two small chambers with rectangular openings are designed for tubular tis­sue from small an­i­mals such as the mouse intestinal tract membrane (CHM6) and rat in­tes­ti­nal tract mem­brane (CHM7). The rect­an­gu­
lar open­ing more close­ly match­es the shape of the tissue than would a
circular open­ing, sig­nif­i­cant­ly increasing the mem­brane area available
for testing. The larger mem­brane area increases the transport rate of low
permeability chemicals; it also reduces the electrical re­sis­tance of the
system for easier current clamp­ing.
Optional Drains
Drains may be added to Ussing chambers to allow quick and complete
evac­u­a­tion of radioactive or tox­ic sub­stanc­es. To have drains added at
the time of or­der, add a “D” to the part number (such as “USS1LD”);
$100 will be add­ed to the cost of the cham­ber or sys­tem you or­der­.
Cartridge Electrodes
The Electrode Kit contains four
voltage/current electrodes, plus four
luer-tipped cartridges. Elec­trodes are
thread­ed and screw securely into the
end of each car­tridge. The luer tip
then plugs securely into the luer open­
ings of the cham­ber. The ca­ble from
each elec­trode ter­mi­nates with a 2
mm pin which may be plugged into
voltage/current clamps such as WPI’s
EKV and EKC
DVC1000 or EVC-4000.
Cartridge Elec­trodes
The miniature electrode-gel cartridge
is a small plastic tube with a male luer tip identical to those at the tip of
hy­po­der­mic syringes. The tube may be filled with different gel ma­te­ri­als;
agar is com­mon­ly used but other gel ma­te­ri­als may also be sat­is­fac­to­ry.
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
96
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
U.S. Patent No. 4,912,060
WPI’s classical Ussing Chambers are well established perfusion chambers
that are easy to operate, easy to control temperature, and easy to clean
after use. Hundreds of them are used daily by scientists in the field.
Ussing Cham­bers are machined from solid acrylic with eight entry ports
for fluid lines, elec­trodes, or agar bridges. For easy, leak-free attachment
of tubing and elec­trodes, all eight ports are luer type. The four ports
for volt­age and current electrodes are re­cessed to prevent formation of
air bubbles in the chamber. The fluid com­part­ments in each side of the
chamber are sep­a­rat­ed by the epithelial membrane being stud­ied. Sharp
stainless steel pins on one side of the chamber hold the mem­brane in
po­si­tion and mate with holes in the opposite chamber in­ter­face. (In the
CHM4, tissue is held by an O-ring instead of pins.)
The CHM5 chamber adapts the Costar Snapwell, a cell cul­ture in­sert
for mono­lay­er cell culture, into WPI’s “classical” ep­i­the­lial volt­age clamp
sys­tem. Until now, classical Ussing Cham­bers have not been widely used
for mono­lay­er cell culture in­serts be­cause most inserts have a very deep
pro­file, limiting good fluid per­fu­sion at the surface of the mem­brane —
and limiting voltage elec­trodes from measuring the po­ten­tial close to the
sur­face of the mem­brane. CHM5 solves these problems: Per­fu­sion fluid is
in­tro­duced into the chamber at an angle so that it will flow directly to the
surface of the mem­brane. The volt­age elec­trode is also in­sert­ed into the
cham­ber at an angle so as to reduce the distance between the surface of
the membrane and the electrode.
Complete Ussing System in­cludes stand, glass res­er­voir, electrodes,
Ussing chamber and tubing (EVC3 preamp and ringstand clamp not
in­clud­ed—see page 14).
CHM8
CHM8 Chamber
5.5 mm
9 mm
17 mm
12 mm
CHM4
Fluid in
Guide
Pins
12 mm
CHM3
Alignment
Dots
CHM5
4 mm
Current
Current
Electrode
Electrode
13.5 mm
6 mm
18.5 mm
CHM6
Luer ports allow easy fitting
of fluid lines and electrodes
14.5 mm
16.5 mm
12 mm
CHM7
30 mm
32 mm
CHM1
(Medium)
CHM2
(Small)
CHM3
(Large)
CHM4
(Ex­tra Small)
CHM5
(Snap)
CHM6
(Rect., Small)
CHM7
(Rect., Large)
CHM8
(Extra Small)
Reservoir Opening
12 mm
9 mm
13.5 mm
4 mm
12 mm
5 x 14.5 mm
7 x 30 mm
4 mm
Half-Chamber Volume
1.0 mL
0.75 mL
1.2 mL
0.5 mL
1.7 mL
0.8 mL
5.5 mL
0.5 mL
Pin Circle Diameter
17 mm
12 mm
18.5 mm
6 mm*
N/A
7 x 16.5 mm
9 x 32 mm
5.5 mm
*O-ring diam.
Circulation Reservoirs
Water Bath
Hand-blown boro­sil­i­cate glass, with
jacketed cham­bers for tem­per­a­ture con­
trol. Avail­able in two siz­es — #5210
holds 20 mL per side, and #5362 (at
left) holds 10 mL per side (use­ful when
ex­pen­sive chem­i­cals are in­volved). Res­er­
voir con­dens­er caps pre­vent air bub­bles
and tur­bu­lence in flu­id res­er­voirs.
The Haake DC10-P5/U Constant Tem­per­a­ture
Water Bath (see page 73) has been test­ed
at WPI and found to be ideal for WPI’s
Ussing sys­tem. It can pro­vide si­mul­
ta­neous warm­ing for up to 16 sys­
tems. Menu-driv­en con­trol mod­ule
al­lows easy tem­per­a­ture set­ting,
cor­rec­tion and dis­play, with tem­per­
a­ture ac­curacy of ± 0.02°C.
USSING SYSTEMS, LARGE RESERVOIR
USS1L
Medium Chamber, Stand, Reservoir, Electrodes, Tubing
USS2L
Small Chamber, Stand, Reservoir, Electrodes, Tub­ing
USS3L
Large Chamber, Stand, Reservoir, Electrodes, Tub­ing
USS4L
Extra Small Chamber, Stand, Reservoir, Electrodes, Tubing
USS5L
Snap Chamber, Stand, Reservoir, Electrodes, Tubing
USS6L
Small Rectangular Chamber, Stand, Reservoir, Electrodes, Tubing
USS7L
Large Rectangular Chamber, Stand, Reservoir, Electrodes, Tubing
USS8L
Extra Small Chamber, Stand, Reservoir, Electrodes, Tub­ing
USSING SYSTEMS, SMALL RESERVOIR
USS1S
Medium Chamber, Stand, Reservoir, Electrodes, Tubing
USS2S
Small Chamber, Stand, Reservoir, Electrodes, Tub­ing
USS3S
Large Chamber, Stand, Reservoir, Electrodes, Tub­ing
USS4S
Extra Small Chamber, Stand, Reservoir, Electrodes, Tubing
USS5S
Snap Chamber, Stand, Reservoir, Electrodes, Tubing
USS6S
Small Rectangular Chamber, Stand, Reservoir, Electrodes, Tubing
USS7S
Large Rectangular Chamber, Stand, Reservoir, Electrodes, Tubing
USS8S
Extra Small Chamber, Stand, Reservoir, Electrodes, Tub­ing
* Add EVC4000 at reduced price when buying Ussing System with
equivalent number of channels
EVC4000-1
EVC4000-2
EVC4000-3
EVC4000-4
1-Channel Voltage Clamp & Preamps
2-Channel Voltage Clamp & Preamps
3-Channel Voltage Clamp & Preamps
4-Channel Voltage Clamp & Preamps
CELL & TI SS U E
Assembled chambers are 101.6 mm (4 in.) long.
9 mm
Optional
Optional drain
drain
for
for hazardous
hazardous
material
material also
also
available
available
CHM1
4 mm
7 mm
Suture quality pins
minimize tissue damage
Reservoir
openings and
pins
Fluid out
7 mm
Voltage
Electrode
5 mm
Clear acrylic chambers let you see
your experiment in progress . . .
CHM2
0.5 mm
pins
System components also available separately:
xxxxD
Drain option (add “D” to part number of chamber or system)
CHM1
Medium Chamber
CHM2
Small Chamber
CHM3
Large Chamber
CHM4
Extra Small Chamber with O-Ring Seal
CHM5
Snap Chamber (fits Costar Snapwell cups)
CHM6
Small Rectangular Chamber
CHM7
Large Rectangular Chamber
CHM8
Extra Small Chamber with Mounting Pins
EK1
Ussing Electrode Kit (2 voltage, 2 current)
EKC
Extra Ussing Current Electrode (red) (each)
EKV
Extra Ussing Voltage Electrode (blue) (each)
5210
Large Glass Circulation Reservoir, (20 mL per side)
5233
Replacement Condenser for 5210
5362
Small Glass Circulation Reservoir, (10 mL per side)
5361
Replacement Condenser for 5362
3955
EKV Cartridges, 35 mm (pkg of 12)
3960
EKC Cartridges, 58 mm (pkg of 12)
3669
Tubing Kit (flexible hose and luer fittings)
3579-20
Replacement luer fittings for tubing connections (pkg of 20)
5153
Support Stand
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
97
An economical, easy-to-use precision microtome
for preparing live tissue sections for physiological,
pharmacological and biochemical research
Blade speed up
to 4500 rpm
Sensitive parts sealed to avoid
damage from spillage
NVSL
(manual)
CELL & TI SS U E
Removable molded
top cover for easy
maintenance
Model NVSL offers a manual advance for positioning the specimen holder and bath chamber.
Sample positioning on Model NVSLM1 is motorized. Other features include independent, re­mov­
able specimen holder and bath chamber, vari­able
advance speed and hands-free operation via a
footswitch.
Advance speed as
low as 0.07 mm/sec
Blade angle variable
through 90 degrees
from horizontal to
vertical
NVSL & NVSLM1
SPECIFICATIONS
SECTION THICKNESS
MINIMUM
MAXIMUM
STEP SIZE
20 µm (fixed tissue)
50 µm (fresh tissue)
700 µm
5 µm
CHAMBER DIMENSIONS
21⁄8 × 31⁄4 × 11⁄4 in.
(55 × 82 × 31 mm)
8.5 cu. in. (140 mL)
VOLUME
NVSLM1
(motorized)
Vibroslice uses a vibrating blade to slice tissues with­out the
trau­ma pro­duced by other meth­ods. Live brain or other tis­
sues can be cut into slices 50- to 700-mi­crons thick. Fixed
tissues can be cut down to 20-mi­cron slices (these need not
be embed­ded or fro­zen). Particularly useful for improv­ing
the access for cer­tain his­to­log­i­cal reagents (e.g., during pro­
cess­ing for horse­rad­ish perox­i­dase).
The blade has a lateral dis­place­ment of about 1 mm, and
its os­cil­lat­ing fre­quen­cy may be var­ied between 60 and
4500 rpm. This al­lows you to achieve clean cuts in tissues
of dif­fer­ent mechanical con­sis­ten­cies.
BATH
ADVANCE SPEED 0.07 to 1.6 mm/s (NVSLM1) (continuously variable)
REVERSE SPEED
4 mm/s (NVSLM1)
VIBRATION
SPEED
AMPLITUDE
60 to 4500 rpm
1 mm (approx.)
POWER
95-135 V, 50/60 Hz, or
220-240 V, 50/60 Hz
SHIPPING WEIGHT
19 lb (8.6 kg)
SYS-NVSL
Manual Vibroslice
SYS-NVSLM1 Motorized Vibroslice
Specify line voltage
OPTIONAL ACCESSORIES
VSLM1H Spare Specimen Holder
VSLM1C Spare Bath Chamber
5450
Replacement Belts for NVSL (2)
5451
Replacement Belts for NVSLM1 (4)
BLADES Blades, Single Edge (100)
7600
Temperature Controller, Standard Power
7600S
Temperature Controller, High Performance
503566
Footswitch for NVSLM1
See adhesives, in Lab Supplies section. See Cidex, in Microsurgery section.
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
98
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Tissue Bath Coolers for Vibroslice
A
Once removed from the animal, tissue must be
immediately cooled to lower the oxygen demand and
prevent anoxia. Holding the tissue close to 4°C must
continue throughout the slicing procedure. This can
be done with passive cooling where a known amount
of ice is used to maintain the cooled a.c.s.f. or with an
electronically controlled Tissue Bath Cooler.
The control unit supplies power to the Peltier
thermoelectric elements in the base of the tissue
bath. These act as energy transfer units so that heat is
drawn off through the heat exchanger and removed
by tap water flow. The unit uses P.I.D. (proportional
integral derivative) temperature control to
take the bath temperature to within
0.5ºC at the point of measurement.
The temperature feedback thermistor
is located in the bath floor and
software calculates an offset
B
automatically.
Immediate cooling of the tissue prevents anoxia by
lowering the oxygen demand. Once removed from the
animal tissue should be immediately place in cooled
saline or sucrose buffer before mounting in the tissue
bath. (See adhesives, pages 154-156.)
7600
7600S
MODEL 7600
SPECIFICATIONS
Display Resolution:
0.1 ºC
Temp. Accuracy:
+/- 1 ºC
+8ºC to 0ºC
Temperature Range:
(Note that the actual temperatures achievable
will be dependent upon the solutions used and
local temperature conditions)
Voltage requirements: 230V 50Hz or 115V 60Hz
Power Rating:
60W
Inlet Fuse Rating:
2A
Controller & Standard Tissue Bath Cooler (A)
Controller & Autoclavable Tissue Bath Cooler (B)
Rodent
Guillotine
DCAPGuillotine for Rodents and other small animals (opening 1.5 x 1.5 in.)
DCAP-MGuillotine for large rodents and other medium animals(opening 2.5 x 2.5 in.)
DCAP-L Guillotine for larger animals (opening 4 x 4 in.)
The small animal guillotine has been
completely redesigned for ease of use and
extra added safety features. The blades are
drawn together by magnetic force to ensure
a clean and precise cut through very strong
bones and skin.
There is a large base for stability, long
handle for extra leverage, spring action so
the blades can not fall down unexpectedly,
hardened stainless blades for endurance,
simplified construction for easy maintenance.
The fluoropolymer coated surface on the base
makes cleaning easy.
The guillotine is considered one of the
most humane methods to dispense with a
subject.
Rodent Brain Matrices
RBMA-200CAdult mouse, coronal slices, acrylic
RBMA-200SAdult mouse, sagittal slices, acrylic
RBMA-300C Rat, 175-300g, coronal slices, acrylic
RBMA-300S Rat, 175-300g, sagittal slices, acrylic
RBMA-600C Rat, 300g-600g, coronal slices, acrylic
RBMA-600S Rat, 300g-600g, sagittal slices, acrylic
RBMS-200CAdult mouse, coronal slices, stainless steel
RBMS-200SAdult mouse, sagittal slices, stainless steel
RBMS-300C Rat, 175-300g, coronal slices, stainless steel
RBMS-300S Rat, 175-300g, sagittal slices, stainless steel
RBMS-600C Rat, 300g-600g, coronal slices, stainless steel
RBMS-600S Rat, 300g-600g, sagittal slices, stainless steel
BLADES
Single-Edge Blades (pkg of 100)
WPI offers one of the largest selections
of brain matrices available. Made
of acrylic, or stainless steel, these
matrices are sturdy and can be heated,
chilled, autoclaved (stainless steel only), scrubbed
— and stand up to rigorous daily use. Coronal matrices
have the additional feature of a mid-line sagittal cut to facilitate
splitting of the left and right hemispheres. Sections can be as fine as
1‑mm. The olfactory/spinal/notch is cut into each matrix.
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
99
CELL & TI SS U E
Large, stable base
Hardened blades for long service
Ambidextrous configuration
FluoroDish
™
Cover-glass bottom for
observing and growing cells
in imaging related research
l Optical quality glass bottom
for better imaging quality
(RI=1.525)
CELL & TI SS U E
l Low sample volume for
expensive chemicals
l Lowest access angle for
micropipette
l Low toxicity adhesive for
embryo research
WPI’s FluoroDish™ tissue culture dishes
are now available in a larger range of sizes
and coatings. These polycarbonate dishes
provide exceptional imaging quality for many
applications requiring the use of inverted
microscopes such as high resolution image
analysis, microinjection and electrophysical
recording of fluorescent-tagged cells. Taking
advantage of WPI’s extensive experience
with low toxicity adhesives, FluoroDish uses a
specially formulated adhesive that is optically
clear, durable and with extremely low toxicity.
Tests by an independent laboratory have shown
that the 96-hour surviving rate of embryos is
100% when kept in FluoroDish, substantially
better than some other brands. The bottom
glass has superior UV transmission (30%
transmission at 300 nm, compared to less
than 7% for the most popular German glass).
Stringent quality control ensures that glass
thickness stays within the 0.17 ±0.01 mm
range.
brighter images for fluorescence and higher
resolution in Image Analysis. The glass bottom
permits the use of immersion objectives with
medium such as water, glycerin or oil for the
highest magnification possible. To optimize
heat-exchange, WPI’s glass-bottom dish is
designed to be flush (flat) with the microscope
stage or heating unit, therefore eliminating the
air gap that exists with modified plastic dishes
in which a glass cover slip has been inserted.
Three different sizes of FluoroDish are offered,
one type of 50 mm diameter dish and two
types of 35 mm diameter dishes. An inner well
is created within the dish by the glass bottom
and the tissue culture grade polystyrene which
forms the sides of the dish. All WPI dishes have
the advantages of low toxicity and good UV
transmission bottom glass. They are individually
packed and gamma sterilized.
The 35 mm dish has outside dimensions
similar to that of a Corning 35 mm dish
and has ø23.5 mm glass window (FD35)
or ø10 mm glass window (FD3510). Most
heaters and perfusion adapters designed
for the Corning 35 mm dish will also fit this
H
dish. The 23.5 mm glass window dish is
available uncoated, poly-D-lysine-coated, or
collagen-coated. Certain types of cell lines
Conventional plastic dishes and chambers
limit the utility of the inverted scope for many
applications because the thick plastic bottom
requires a long working distance objective
available only in lower magnifications. Each WPI
dish has a flat (0.17 mm thick) optical quality
glass bottom, allowing the use of a much
shorter objective working
distance, larger numerical Part Number
ID (mm
aperture (NA), and a
FD35
33
higher magnification
FD3510
10
(up to 100x). The
FD5040
47.5
larger NA and higher
magnification provide
superior quality imaging
for both classical
FD35-100
FluoroDish Sterile
and fluorescence
FD35COL-100 FluoroDish Sterile
microscopy. Higher
FD35PDL-100 FluoroDish Sterile
effective NA yields
FD3510-100
FluoroDish Sterile
FD5040-100 FluoroDish Sterile
(e.g., PC3 and HEK) adhere well to the uncoated
glass bottom dish. The poly-D-lysine coating
has been reported to improve the adhesion
of neuron cells, and type I rat tail collagen
has been reported to improve the adhesion of
muscle cells. The users can also apply to the
uncoated dish any special coating that is best
for their cell line.
The 10 mm glass window dish (FD3510) has
low sidewall for easy microelectrode access and
low solution volume. The low microelectrode
access angle is the lowest among all of 35 mm
dishes on the market (very close that of a 50
mm dish). The dish needs only 100 ~ 200 mL
to cover the bottom well, an important feature
when using expensive drugs and chemicals.
The 50 mm dish (FD50) has a large growth
area (35 mm well diameter), a low access
angle for microelectrodes, and grips for easy
handling.
OD
ID
Access
Angle
h
Glass Ø
OD (mm)Glass Ø (mm)
35.5
23.5
35.5
10
49.82
35
height (inside)
7.8
1.5
7.25
Height (outside)
9
4.65
7.4
Access Angle
29°
17°
17°
l Choose from poly-D-lysine or collagen coated, or uncoated
Culture
Culture
Culture
Culture
Culture
Dish,
Dish,
Dish,
Dish,
Dish,
clear wall, 35 mm, 23 mm well, box of 100
Collagen Coated, clear wall, 35 mm, 23 mm well, box of 100
Poly-D-Lysine Coated, clear wall, 35 mm, 23 mm well, box of 100
clear wall, 35 mm, 10 mm well, low sidewall, box of 100
clear wall, 50 mm, 35 mm well, box of 100
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
100
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
MPS-2
Multichannel
Perfusion
System
for single ion channel and
whole-cell solution exchange
● Manual or Programmable PC control
with user-friendly GUI interface
● Fast LAFF solenoid valve
● Color-coded polyurethane tubing for
easy identification
● Super low dead volume (<80 nL)
micromanifold
● Economically priced
inputs from 1/16” ID tubing
internal
passage ID:
250 µm
14 mm OD
internal junction
OD: 600 µm
Micromanifold closeup: Fluid-filled passages are shown in magenta.
MPS-2 is a programmable 8-channel perfusion system designed for single
channel and whole-cell patch preparations. Offering the best combination
of performance and value, the MPS-2 incorporates the same high quality
solenoid valves found on similar but much more expensive systems.
Unlike other perfusion systems on the market, which often compromise
performance to fit every possible application, the MPS-2 is the only
perfusion system designed and optimized specifically for single-channel and
whole-cell patch perfusion applications.
The system can be controlled manually via membrane switches on the front
panel or through a PC. Two different manual control modes are offered. One
controls each channel independently and the other mode allows the user
to assign a master channel that will keep the system flow when all other
channels are switched off. User-friendly graphic timing software is included,
and the programmed perfusion sequence can be started by computer, a
patch clamp amplifier or other external trigger, or manually by the user
The perfusion fluid flows through specially designed color-coded
polyurethane ribbon style tubing. The color-coding allows the user to easily
trace each channel for diagnostic checks or set up and the ribbon style of
tubing keeps the system very neat and organized. Unlike PVC based tubing,
polyurethane tubing contains no plasticizer, which can cause contamination.
The tubing ribbon is designed as an economical disposable item, which is
often critical when cleanness is needed.
The most unique feature of the MPS-2 is its perfusion micromanifold.
Using the latest microfluidic techniques, the injection molded micromanifold
provides the least flow resistance and dead volume of any product on the
market. The flow channel inner diameter is approximately 1.0 mm, except
for the last 5 mm before the junction
point. This design allows a fast flow
MPS-2
Multichannel Perfusion System & Control Software
rate without using a pressured system.
Replacement Parts
The maximum flow rates are 1 and 16
502109-15 Color-coded Polyurethane Tubing, 1/16” ID x 8 Channels, 15 ft
microliter per second for the 15 mm long
502110
Micromanifold, 100 µm ID tip, 2 pcs/pk
100 µm and 200 µm ID tips, respectively.
502125
Micromanifold, 200 µm ID tip, 2 pcs/pk
Small channels and a unique design at
Specify line voltage and Micromanifold tip OD when ordering.
the merging point further reduce the
chance of cross contamination. Dead
volume is less than 80 nL.
MPS-2 SPECIFICATIONS
Channels
8
Valve Response Time
2 ms
Valve Control
Serial Port, TTL, and Manual
Syringe Reservoir Volume
10 mL
Manifold
8 to 1
Tip ID
200 micron and 100 micron.
Maximum Flow Rates (gravity fed)
100 µm ID tip, 60 µL/min. (equivalent linear speed: 12.7 cm/sec)
200 µm ID tip, 960 µL/min. (equivalent linear speed: 51 cm/sec)
Dead Volume
< 80 nL excluding the single outlet tubing
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
101
CELL & TI SS U E
output: 100
or 200 µm ID
quartz/polymide
tubing
mounting rod
connector
High Performance Digital Data Recorder
l 100 KHz max. sample rate
l Low noise
l Two independent DAC
stimulator outputs
l 16 programmable I/O lines
l USB interface
DATA ACQUISITION
WPI-118 is a fast, high-resolution data acquisition system suitable for
most data recording studies in the research laboratory. It offers eight
analog input channels, eight digital outputs, four digital inputs and
two DACs. The hardware connects to PC-compatible computers via the
popular USB interface, so setup is plug-and-play easy. The small physical
size of the WPI-118 requires very little bench space.
Key Hardware Features
Analog Outputs — WPI-118 offers two +/- 10V Analog Outputs (DACs). Each
is independently programmable and can be synchronized to work together.
Basic stimulus parameters for each DAC, such as pulse width, frequency and
amplitude, can be changed on-the-fly using handy controls located in the
Data-Trax software toolbar. Standard protocols include pulse, train, and step
waveforms. Each standard protocol allows the quiescent state to be a holding
voltage, thereby making it ideal for voltage clamping applications.
Resolution and Noise — WPI-118 employs a 16-bit A/D converter to sample
data over its 10-Volt input range. Typical noise on any input is less than 1
millivolt. This allows the recording of signals from 10 mV to 10 V without
the need for additional external gain.
Digital Input/Output — Eight digital output lines are available. The digital
output connectors are industry standard BNC, eliminating the need for custom
cables. Programming the output lines is point-and-click easy as well, no
complicated scripting language is required. Four digital input lines are also
provided, with one configured as an external trigger.
Speed — The WPI-118 is a fast recorder. At top speed it can collect 100,000,
16-bit samples per second on a single channel. With eight channels enabled,
it can collect data at 10,000 samples per second on each of the open
channels.
USB Connection — Connection to the computer is accomplished over the
popular USB port. This eliminates the need to install special interface cards
and even makes the WPI-118 compatible with notebook computers. The WPI118 has a small footprint, so it fits in even the tightest rack spaces.
System Requirements — WPI-118 requires a minimum Pentium II-level
computer running Windows 98, ME, 2000 or XP with at least 64 megabytes
of RAM, and at least 10 megabytes of free space on the hard drive. Internet
connection is required for free automatic upgrades.
See complete specifications at www.wpiinc.com
WPI-118
High Performance Digital Data Recorder
OPTIONAL ACCESSORIES
2851
BNC-to-BNC Cable, M-M, 5'2"
3491
DIN8 Extension Cable, M-F, 5 ft
WPI-118 Specifications
Input
Number of Inputs
8 single-ended BNC
Input Impedance
1 MOhm
Input Range
±10V
Noise
1 LSB (1mV typical)
Gain
x1
Digital Input Lines
8 (4 dedicated and 4 programmable)
Output
Number of DACs
2
DAC Resolution
12 Bit
DAC Speed
100k s/sec, independent of sample speed
DAC Output Range
±10V
DAC Modes
Pulse, Train, Step, DC
DAC Performance
Pulse Width
0.01ms-6,500 ms (pulse mode)
Frequency
0.2Hz-50kHz (pulse Mode)
Digital Output
Lines
8 (4 dedicated and 4 programmable)
Digital Output ConnectorBNC
A/D Converter
Sample Speed
1 sample/second - 100k samples /second
Resolution
16 bit
Interface
USB
Enclosure
Aluminum (CE compliant)
Power
120V/220V, 50/60Hz
Software
Data-Trax
Trigger Modes
Trigger
External Trigger, Threshold Trigger from Data, User
DisplayReal time, user definable screen time independent
of sample rate, user definable units, AutoScale,
full scale or user defined scale
Upgrades
Software and firmware upgrades are free, and are
automatically delivered to registered users via the
Web. Data-Trax software may be freely distributed.
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
102
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
ul
werf
es po
d
Inclu
Enjoy the easiest, most powerful data acquisition with
2
re!
a
softw
Lab-Trax
™
DATA ACQUISITION
New T-Series Lab-Trax includes built-in transducer amplifiers.
Lab-Trax hardware is available in
4-channel configurations and may
include, at the user’s option, builtin amplifiers for force or pressure
transducers.
The Lab-Trax-4 (standard) device
offers 16-bit resolution over the ± 10
volt input range and exhibit less than a
millivolt of noise. Data communication
as well as power is managed over the
USB port, making it easy to use a laptop
or a low-profile desktop computer that
may not be equipped with expansion
slots or serial ports.
Data is delivered to the recorder
by way of very standard front-panelmounted BNC connectors.
The lab-Trax-424T device offers the
same high quality recording capability
but are line powered and have built-in
transducer amplifiers. A wide range
of force, displacement and pressure
sensors can be plugged directly into the
recorder using the DIN-8 connectors on
the front panel.
The available Lab-Trax hardware
together with WPI’s range of signal
conditioners and the Data-Trax software
make it the perfect choice for research
systems addressing cardiovascular
studies, blood pressure, cardiac
electrophysiology, hemodynamic studies
of the pulmonary and coronary systems,
and studies of isolated tissues in organ
or tissue baths. Equipment from WPI
can also be used to tailor systems for
epithelial studies, and many applications
in neurophysiology.
For higher speed applications,
see WPI-118 (previous page). This
8-channel device will acquire at
100,000 samples per second at 16-bit
resolution.
Gang multiple 4-channel systems
in the same copy of Data-Trax
Multiple Lab-Trax units can be “ganged”
using the Data-Trax software (version
2.0). When plugged into different USB
ports of a computer, the Lab-Trax inputs
are collected by Data-Trax and displayed
just as channels from a single source.
For example, two 4-channel units can
be ganged to produce an 8-channel
acquisition system. As many as eight
units can be ganged to collect as many
as 32 channels at once. The Views
feature in Data-Trax makes it easy to
keep track of all the channels. And,
of course, all analytical features are
incorporated — including scripting and
Matlab compatibility.
LAB-TRAX-4
4-Channel Data Acquisition System
LAB-TRAX4-24T 4-Channel Data Acq Sys w/ Transducer Amps
OPTIONAL ACCESSORIES
2851
BNC-to-BNC Cable, M-M, 5 ft
3491
DIN8 Extension Cable, M-F, 5 ft
300344
DIN8 to BNC, 5 ft
Lab-Trax-4
Number of Inputs.............................. 4
ADC Resolution.................................. 16 bit
Maximum Sampling Rate................ 10,000 samples / sec aggregate
Input Connectors............................... BNC, 50 ohm (T-series: DIN-8)
Input Impedance................................ 1M Ohm
Input Range......................................... +/- 10 V
System Noise...................................... < 1mV (1 part in 20,000)
Digital Input/Output.......................... 4 inputs 4 outputs
Power Source...................................... Powered via USB (T-series: 120/240V)
Operating Current ............................ 100 mA
PC Interface ....................................... USB 1.1
Maximum Input Voltage.................. 10 volts (100 with x10 probe)
Lab-Trax-424T
Number of inputs.............................. 4
Input Connectors............................... DIN 8 pin
PC Interface ....................................... USB 2.0 full speed
Excitation............................................. ± 5 volt (±10%)
Input Impedance................................ 182 G ohm min
Input Range......................................... ± 10 volt
Noise.................................................... 250 μV at 1000 s/s typical,
reduces as sampling rate is reduced
Gain .................................................... 1 to 10k (set by transducer)
Power.................................................... 120/220 V AC, 60/50 Hz (switched)
Stimulator Outputs
Number..................................... 4
Resolution................................ 16 bit
Output Range.......................... + 10 VDC
Modes........................................ Pulse, Train, Constant, Step, Ramp, Triangle
Digital Outputs................................... 8
A/D Converter
Samples/Second..................... 1, 2, 5, 10, 20, 50, 100, 200, 500, 1K, 2K, 5K
Interface.................................... USB
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
103
Record and analyze your data with
Powerful software
included with Lab-Trax™
The acquisition and data display in Data‑Trax
is easy and straight forward. It supports real
units and a time-based display that is not
coupled to sample rate. You can display up
to 1,000,000 data points per channel on
the screen. Scrolling, zoom-in and zoom-out
tools, together with a searchable list of user
interventions, make finding important areas
of data easy. And, of course, you can print or
export anything that you see.
DATA ACQUISITION
The Main Display
Data recorded with Data-Trax is presented
as distance-per-unit of time, e.g., cm/sec,
exactly as it would be on a traditional
paper chart recorder. The x-axis display
is compressed or expanded using point
and click icons in the Data-Trax toolbar.
Data-Trax’s display can smoothly scroll
data at any speed. The display scroll rate
is not determined by sampling rate, so
you have full control over resolution and
display. This is particularly useful when
you want to compress high-resolution
data on the time axis to create a data
overview. Currently the software can
display 100,000 points per channel
online and one million points per channel
offline so you can see quite a bit of data
at a glance.
Data-Trax’s Main Window currently
supports functions that can show you
the real-time rate, integral or any of
16 online analyses. Each of these is
set up from a single click in the Main
Window. Data-Trax also has an “Analysis
Window” where students can make more
in-depth measurements and build lab
reports. There are 31 different kinds of
measurements supported in this window.
Main Display
WPI’s coordinated system of hardware
and software allows life science
researchers to record and analyze a range
of data types with ease and simplicity. Low profile,
low cost, high flexibility and utility make Lab-Trax devices
the perfect choice for applications involving tissue and organ
bath recordings, epithelial voltage clamp studies and a host of
cardiovascular applications — just to mention a few.
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
104
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
AutoScale
A single button allows you to find the data on
a channel, wherever it is, center it and expand
it to fill the available channel space. AutoScale
used with high-resolution recorders ensures that
you will never again lose data because they are
“out of range or off scale“.
Cursors
Most measurements students make on
recorded data involve a distance in time or
a difference in amplitude. For this reason,
Data-Trax places two easy-to-move cursors in
Real-Time Marks
Researchers can insert
“Text Marks” from the
keyboard into their
data to indicate when
events like drug delivery
or stimulus points are
occuring. Marks are easy
to search and the ”Go
To Mark” feature will
take you to a selected
event from anywhere in
the data. For reporting,
researchers
can position
the text in
a given mark over the data it
applies to, just like writing on
chart paper.
Units Window
each display of data. Data-Trax displays the
difference in time and the difference in voltage
(or calibrated units) between the cursors.
Cursors can be moved with the mouse, or for
precise placement, with the arrow keys on the
keyboard.
Real World Units
Data-Trax allows you to calibrate the displayed
data in any unit that you choose. Reading your
data in mmHg or grams or micro amps takes
the guesswork out of analysis.
Marks Window
Digital Inputs
Up to eight digital inputs can be
configured from Data-Trax. Raw data, count
frequency, and open times can be displayed in
real time.
Digital Output
Up to eight digital outputs can be configured
from the Data-Trax software. Digital outputs
can be used to control valves or relays in the
experimental rig, or they can be configured in
parallel to control
serial devices.
Output
sequences of
events are created
from an easy-to-use sequence builder that
can include both the digital outputs and the
analog outputs. Sequences are remembered
by Data-Trax and can be called manually or
automatically.
Lab Settings
Settings or templates for the various lab
protocols are stored in the program’s settings
menu. Each setting can include a Lab procedure
and Journal format, as well as the program
acquisition and analysis settings. This makes
changing program settings to accommodate
different experiments point-and-click easy.
Free Upgrades and Built-in Site License
Data-Trax software upgrades are free. Better yet,
Data-Trax may be freely distributed and copied
to other lab computers.
That means that researchers can record data
in the lab and work on analysis and lab reports
at their leisure in different locations.
Data-Trax is provided on an open license so
you can record data in the lab and analyze it
in your office without buying multiple copies of
the software..
Input/Output Window
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
105
DATA ACQUISITION
Twin DACs (WPI-118 only)
Data-Trax allows you to program
two independent analog outputs.
They can be used as independent
stimulator outputs, or as linear
controls for pumps or other
hardware that accept an analog
voltage as control. Built-in wave
protocols include pulse, step, pulse
train and DC. The two outputs can
be combined to produce more
complex protocols.
Stimulator Window
Using WPI Data Acquisition Systems in
Cardiovascular Applications
Cardiac Hemodynamics
Hemodynamics is the study of the dynamic behavior of
blood as it flows around the heart, the lungs and the body.
Pressure is generated in various parts of the heart as a
result of this movement. These pressures can be measured
and monitored through catheters whose tips are placed in
the atria, pulmonary artery, or systemic arteries.
Hemo-dynamic studies require the measurement of
pressure, flow, and electrical signals from the heart, and
electrical signals from nerves, such as the vagus. WPI
has everything you need for research studies in hemody­
namics, and associated studies in cardiac electrophysiology and cardiopulmonary function.
DATA ACQUISITION
Hardware
The Lab-Trax 4/24T is the perfect recorder for
cardiovascular applications. The T Series has
built-in transducer amplifiers so blood pressure
transducers or other transducers plug directly
in. Each channel has its own independent
stimulator output so complex waveforms can
be generated as well as simple things like vagal
stimulation or extra stimulus pacing of cardiac
preparations. In addition, 8 programmable digital
I/O lines can control pumps or drug delivery in
the laboratory environment. The Lab-Trax series
connects to your computer via the USB port so
installation is truly plug and play.
For complete description, see page 81
Software
Online Analysis
Data-Trax can calculate rate, systolic,
diastolic and mean pressures, as well
as dp/dt and integral from any raw
data input in real time. All of the same
functions can be applied offline, too.
A powerful baseline-tracking
algorithm ensures that even if your
signal moves or changes shape, the
calculated rate or systolic/diastolic/mean pressure is faithfully reported.
Offline Analysis
All of the online functions can be
applied offline. In addition, a series of
functions applied from the Analysis
window can be used to reduce raw
data. Functions operate on a selection
of data and return a single value,
which can be written to the Data-Trax
Journal. Currently supported functions
Simultaneously record and
Automark LDEVP (Channel 1) and
systolic and dichrodic notch values
(Channel 2) from a blood pressure
curve.
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
106
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Capture data and post to the Marks Window to preview prior
to export.
XY Window
Easily export data to Excel or other analytical program for
further analysis.
Real Time Annotations
While recording, you can mark your data with text messages.
These marks are searchable and appear in the field of data to
which they apply. Marks are time locked to the record and can be
used to “Go To” any marked region of the data.
Data Reduction
Data can be analyzed and reduced in the Analysis window. Here,
selections of data can be averaged and written to a report. For
example, the software can be instructed to break the record up
into five-minute pieces, determine the average systolic or average
heart rate for the data in each segment, and write those values to
a report.
XY Window
Any channel can be displayed
in XY format. Data-Trax
supports area measurements
and segment slopes from such
plots. And, of course, you can
save the plots as pictures or
text.
Export
All recorded data can be
exported to a MatLab, DADiSP,
Excel or text file or as a
picture (.png), making reports
or posters much easier to
create. Of course, you can
always print your data from
any window at any scale.
DATA ACQUISITION
include: mean, integral, area, dp/dt, mean dp/dt, mean systolic,
mean diastolic, and mean rate. Analysis window functions used in
conjunction with the Data-Trax Find command, can automatically
analyze the entire record.
Input/Output
The built-in stimulator allows delivery of a single, continuous, or
train of pulses. Pulse durations, frequencies and amplitudes can be
changed as the protocol is being delivered. The software also offers
full control of digital 1/0 lines that can be used to count events, or
control devices in the lab environment.
Display
Data-Trax allows you to easily convert voltage to real units, such as
mmHg or percent for pressure or flow measurements, respectively.
The display allows you to toggle between a preferred Y-axis scaling
(between 40 and 140 mmHg, for example) and the “best view” as
determined by the AutoScale feature. Alternately, you can zoomin or zoom-out by factors of two with a single mouse click. In a
similar fashion, X-axis scaling can be expanded or compressed by
factors of two with a single click.
For more information
about Data-Trax, see
pages 82-85.
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
107
Surgical & Microdissection Tools
MICRODISSECTION
MICROSURGERY
Forceps & Tweezers
Forceps by Dumont. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Economy Fine Tweezers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ceramic-tip Forceps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Forceps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tissue & Dressing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cupped. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Round-handled . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Filter Forceps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hemostatic. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
109
114
115
115
119
120
121
122
123
Vannas & Other Spring Scissors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Titanium Spring Scissors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ring Scissors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ceramic. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Round-handled . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Microintraocular. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
126
129
132
140
141
141
Scissors
Needle Holders
Micro & Castroviejo. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Standard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Olsen-Hegar. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Needles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
143
144
146
147
Clips & Clamps
Clips & Applying Forceps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
Vessel Clips. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
Bulldog Clamps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
Retractors, Knives, & Cutters
Retractors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sapphire Knives. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Scalpel Blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ear Punches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rongeurs & Bone Cutters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hooks and Probes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dermal Punches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
151
154
155
157
157
160
166
Surgical Accessories & Animal Handling Gloves
Gloves. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rodent Guillotine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Binocular Loupes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Surgery Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
165
165
167
168
Electrosurgery
Disposable Cautery Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Thermal Cautery Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
High Freequency Dessicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Electrosurgical Unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
OmniDrill35 Micro Drill System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
169
170
171
172
172
Instrument Care
Care & Handling of Surgical Instruments. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Instrument Protection Tray. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ultrasonic Cleaner. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dry Sterilizer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cleaning Solutions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
142
173
175
175
176
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
108
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Forceps by Dumont
For material information and instrument purchase guidance
visit www.wpiinc.com
Material: Stainless Steel
Length:
8.2cm
Tips:
0.09 x 0.05 mm
501764 . . . . . . . . . . . . . .
23
US$
1:1
Dumont #1
Material:
Length:
Tips:
Inox
12 cm (4.75 in.)
0.20 x 0.12 mm
Tip Profile:
1:1
Stainless steel, Medical Biology
12 cm long (4.75 in.)
0.1 x 0.06 mm
Tip Profile:
500229. . . . . . . . . . . . . . . US$43
1:1
500335 . . . . . . . . . . . . . .
25
US$
Dumont #1
Material:
Length:
Tips:
Dumont #2
Material:
Length:
Tips:
Inox
12 cm (4.75 in.)
0.34 x 0.14 mm tips
500336. . . . . . . . . . . . . . . . . US$25
Tip Profile:
1:1
Stainless steel, Medical Biology
12 cm (4.75 in.)
0.17 x 0.07 mm
Tip Profile:
500230 . . . . . . . . . . . . . .
38
US$
1:1
Dumont #3C
Material:
Length:
Tips:
Dumostar, Biology, non-magnetic, non-corrosive
11 cm (4.3 in.)
0.08 x 0.04 mm
Tip Profile:
500064 . . . . . . . . . . . . . . US$44
1:1
Dumont #3
Material:
Length:
Tips:
Dumostar, Biology, non-magnetic, non-corrosive
12 cm (4.75 in.)
0.08 x 0.04 mm
Tip Profile:
500337. . . . . . . . . . . . . . . US$43
1:1
Dumont #3
Material:
Length:
Tips:
Inox
12 cm (4.75 in.)
0.17 x 0.10 mm tips
500338 . . . . . . . . . . . . . .
US$
26
Tip Profile:
1:1
Dumont #3
Material:
Length:
Tips:
Flat, long, narrow
12 cm (4.75 in.)
0.20 x 0..12 mm tips
503235. . . . . . . . . . . . . . .
1:1
50
US$
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
109
MICROSURGERY
Dumont #2
Material:
Length:
Tips:
MICRODISSECTION
Mini Dumont #M5S
Dumont #4
Material:
Length:
Tips:
Dumostar, Biology, non-magnetic, non-corrosive
Tip Profile:
11 cm (4.3 in.)
0.06 x 0.02 mm
MICROSURGERY
500339 . . . . . . . . . . . . . .
Dumont #4
Material:
Length:
Tips:
Inox
11 cm (4.3 in.)
0.13 x 0.08 mm
500340 . . . . . . . . . . . . . .
US$
28
Tip Profile:
1:1
Dumont #4
Material:
Length:
Tips:
Stainless steel, Medical Biology
11 cm long (4.3 in.)
0.02 x 0.06 mm Mod Tip Profile:
500231. . . . . . . . . . . . . . .
1:1
46
US$
Dumont #5
Material: Dumostar, Medical Biology,
non-magnetic, non-corrosive
11 cm long (4.75 in.)
Length:
Tips:
0.025 x 0.015 mm
500085 . . . . . . . . . . . . . .
MICRODISSECTION
1:1
48
US$
71
US$
Tip Profile:
Dumont #5
Material:
Length:
Tips:
Finest tips
available
Inox
11 cm (4.3 in.)
0.025 x 0.005 mm
501985. . . . . . . . . . . . . . .
1:1
72
US$
1:1
Dumont #5
Material:
Length:
Tips:
Dumostar, non-magnetic, non-corrosive
11 cm (4.3 in.)
0.1 x 0.06 mm Tips
Tip Profile:
500233 . . . . . . . . . . . . . . . US$46
1:1
Dumont #5
Material:
Length:
Tips:
Dumoxel, non-magnetic stainless steel
11 cm (4.3 in.)
0.1 x 0.06 mm tips
Tip Profile:
14098 . . . . . . . . . . . . . . . . US$32
ST
MO AR!
UL
POP
1:1
Dumont #5
Material:
Length:
Tips:
Inox
11 cm (4.3 in.)
0.10 x 0.06 mm
500342 . . . . . . . . . . . . . .
30
US$
Tip Profile:
1:1
Dumont #5
Material: Inox, Biology
Length: 11 cm (4.3 in.)
Tips:
0.05 x 0.01 mm tips
500341 . . . . . . . . . . . . . . .
36
US$
Tip Profile:
1:1
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
110
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Dumont AntiMagnetic
Material:
Length:
Tips:
Stainless steel, Medical Biology
70mm
Thickness:10mm, Width 0.17mm
503366 . . . . . . . . . . . . . .
24
US$
Dumont Dumoxel
Material:
Length:
Tips:
Stainless steel, Medical Biology
70mm
Thickness: 0.04mm, Length 0.08mm
503368 . . . . . . . . . . . . . .
32
US$
1:1
Dumont Dumoxel
Material:
Length:
Tips:
Stainless steel, Medical Biology
70mm
Thickness: 0.08mm, Length 0.17mm
503367. . . . . . . . . . . . . . .
24
US$
1:1
Dumont #5
Material:
Length:
Tips:
Stainless steel, Medical Biology
11 cm (4.3 in.)
0.05 x 0.01 mm
14095. . . . . . . . . . . . . . . .
43
US$
Tip Profile:
1:1
Tip Profile:
1:1
Tip Profile:
1:1
MICRODISSECTION
1:1
Dumont #5
Dumoxel, self-closing
11 cm (4.3 in.)
0.1 x 0.06 mm
501203 . . . . . . . . . . . . . . .
41
US$
Dumont #5
Material:
Length:
Tips:
Inox, Biology, self-closing
11 cm (4.3 in.)
0.05 x 0.01 mm
501202 . . . . . . . . . . . . . . .
38
US$
Dumont #5
Material:
Length:
Tips:
Medical, 90° bent
11 cm (4.3 in.)
0.05 x 0.01 mm
501201. . . . . . . . . . . . . . .
43
US$
Tip Profile:
1:1
Dumont #5
Material:
Length:
Tips:
Stainless steel, Medical Biology, bent at 45°
11 cm (4.3 in.)
Tip Profile:
0.05 x 0.01 mm
14101 . . . . . . . . . . . . . . . .
47
US$
1:1
Dumont #5
Material:
Length:
Tips:
Stainless steel, Medical Biology
11 cm (4.3 in.)
0.02 x 0.06 mm half curved Tip Profile:
500232 . . . . . . . . . . . . . . . US$48
1:1
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
111
MICROSURGERY
Material:
Length:
Tips:
Dumont #5
Material:
Length:
Tips:
Titanium
11 cm (4.3 in.)
0.1 x 0.06 mm
14096 . . . . . . . . . . . . . . . .
Tip Profile:
40
US$
1:1
MICROSURGERY
Dumont #55
Dumostar, Biology, non-magnetic, non-corrosive
11 cm (4.3 in.)
0.05 x 0.01 mm
Tip Profile:
500235 . . . . . . . . . . . . . . . US$53
Material:
Length:
Tips:
1:1
Dumont #55
Material:
Length:
Tips:
Stainless Steel, Biology
11 cm (4.3 in.)
0.05 x 0.01 mm
14099 . . . . . . . . . . . . . . . .
36
US$
Tip Profile:
1:1
Dumont #5B
Material:
Length:
Tips:
Inox, Biology, bent at 45°
11 cm (44.3 in.)
0.05 x 0.01 mm
500234 . . . . . . . . . . . . . .
41
US$
Tip Profile:
1:1
Dumont #6
MICRODISSECTION
Material:
Length:
Tips:
Stainless Steel, Medical
12 cm (4.75 in.) sharp points
0.17 x 0.1 mm
Tip Profile:
501204 . . . . . . . . . . . . . . . US$40
1:1
Dumont #7
Material:
Length:
Tips:
Dumoxel, non-magnetic stainless steel
12 cm (4.75 in.)
0.17 x 0.1 mm
Tip Profile:
14188 . . . . . . . . . . . . . . . .
1:1
41
US$
Dumont #7
Material:
Length:
Tips:
Inox
12 cm (4.75 in.)
0.17 x 0.1 mm
14097. . . . . . . . . . . . . . . .
34
US$
Tip Profile:
1:1
Dumont #7
Material:
Length:
Tips:
Titanium
12 cm (4.75 in.)
0.17 x 0.1 mm
14187 . . . . . . . . . . . . . . . .
42
US$
Tip Profile:
1:1
Dumont #7
Material:
Length:
Tips:
stainless steel
11 cm (4.3 in.), curved, serrated jaws
0.17 x 0.10 mm
Tip Profile:
501302 . . . . . . . . . . . . . . . US$59
1:1
Dumont #7
Material:
Length:
Tips:
Inox, Biology, self-closing,
12 cm (4.75 in.)
0.07 x 0.03 mm, curved
501205 . . . . . . . . . . . . . . .
38 Tip Profile:
US$
1:1
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
112
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Dumont #7
Material: Dumoxel, Biology, self-closing
Length:
12 cm (4.75 in.)
Tips:
0.08 x 0.04 mm
Tip Profile:
501206 . . . . . . . . . . . . . . . US$46
1:1
503234 . . . . . . . . . . . . . .
72
US$
1:1
Dumont Forceps
Material: Flat and rounded
Length:
130mm
Tips:
0.60 x 020mm
503232 . . . . . . . . . . . . . . .
1:1
54
US$
Dumont Forceps
Material:
Length:
Tips:
Wide square tips
120mm
2.00 x 0.20mm
503233 . . . . . . . . . . . . . . .
56
1:1
US$
MICRODISSECTION
Dumont #7
Material: Flat and rounded, self-closing
Length:
12cm long
Tips:
1.50 x 0.20 mm
Dumont Fine Tip
Material:
Length:
Tips:
Stainless steel, non-magnetic
135mm
45° Bent tips
58
US$
1:1
Dumont Fine Tip
Material:
Length:
Tips:
Stainless steel, non-magnetic
135mm
Straight
503291 . . . . . . . . . . . . . . .
38
1:1
US$
Dumont Tweezers
Length:
Tips:
115mm
Serrated, 0.17 x 0.10mm,
503369 . . . . . . . . . . . . . .
32
US$
1:1
Dumont Vessel Cannulation Forceps
Length:
Cannulation:
13cm
0.5mm OD
503374 . . . . . . . . . . . . . .
1:1
179
US$
Dumont Vessel Cannulation Forceps
Length:
Cannulation:
13cm
0.35mm OD
503373 . . . . . . . . . . . . . .
182
US$
Dumont Vessel Cannulation Forceps
Length:
Cannulation:
13cm
1.0mm OD
503375 . . . . . . . . . . . . . .
168
US$
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
113
MICROSURGERY
503290 . . . . . . . . . . . . . .
Economy Fine Tweezers
Made of quality stainless steel, these tweezers are useful for general dissections where ultrafine tips are not necessary. Economically priced per
package of 6, they are affordable enough for everyone to have their own instruments.
All tweezers on this page are sold in packages of 6
MICROSURGERY
Economy Tweezer Style 1
Material:
Length:
Tips:
Stainless Steel
11 cm (4.3 in.)
0.45 x 0.55 mm
501974-6. . . . . . . . . . . . .
US$
501974. . . . . . . . . . . . . . .
US$
49
1:1
12
Economy Tweezer Style 2
Material:
Length:
Tips:
Stainless Steel
11 cm (4.3 in.)
0.40 x 0.55 mm
501975-6. . . . . . . . . . . . .
US$
501975. . . . . . . . . . . . . . .
US$
49
1:1
12
Economy Tweezer Style 3
Material:
Length:
Tips:
Stainless Steel
11 cm (4.3 in.)
0.20 x 0.40 mm
1:1
49
501976-6. . . . . . . . . . . . .
US$
501976. . . . . . . . . . . . . . .
US$
12
MICRODISSECTION
Economy Tweezer Style 3C
Material:
Length:
Tips:
Stainless Steel
11 cm (4.3 in.)
0.40 x 0.45 mm
49
501977-6. . . . . . . . . . . . .
US$
501977. . . . . . . . . . . . . . .
US$
1:1
12
Economy Tweezer Style 4
Material:
Length:
Tips:
Stainless Steel
11 cm (4.3 in.)
0.40 x 0.45 mm
49
501978-6. . . . . . . . . . . . .
US$
501978. . . . . . . . . . . . . . .
US$
1:1
12
Economy Tweezer Style 5
Material:
Length:
Tips:
Stainless Steel
11 cm (4.3 in.)
0.40 x 0.45 mm
49
501979-6. . . . . . . . . . . . .
US$
501979. . . . . . . . . . . . . . .
US$
12
1:1
Economy Tweezer Style 6
Material:
Length:
Tips:
Stainless Steel
11 cm (4.3 in.)
0.40 x 0.50 mm
501980-6. . . . . . . . . . . . .
US$
501980. . . . . . . . . . . . . . .
US$
49
1:1
12
Economy Tweezer Style 7
Material:
Length:
Tips:
Stainless Steel
11 cm (4.3 in.)
0.40 x 0.50 mm
501981-6. . . . . . . . . . . . .
US$
501981. . . . . . . . . . . . . . .
US$
49
1:1
12
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
114
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Ceramic-tipped Forceps
Dumont #3
Material:
Length:
Tips:
Dumoxel, self-closing
12 cm (4.75 in.)
0.4 x 0.3 mm Ceramic
501208. . . . . . . . . . . . . . .
1:1
68
US$
Dumont #3C
Material:
Length:
Tips:
Dumoxel
11 cm (4.3 in.)
0.4 x 0.3 mm Ceramic
501209. . . . . . . . . . . . . . .
1:1
Tip Profile:
65
US$
Zirconia Ceramic Forceps with
plastic handles, 14 cm (5.5 in.)
long, 9 mm straight tips
MICRODISSECTION
Zirconia ceramic forceps have several unique properties that are not present in metal forceps.
●Ceramic contains no metal, therefore, the forceps will not leave any trace metal residue on tissue. This is especially useful in forensic science research.
●Ceramic is not electrically conductive so it can be used for handling gels in an electrophoresis bath.
●Ceramic’s corrosion resistance allows its use in highly corrosive solutions. For example, clean quarz cover glass or lithographic produced chip sensors in an acid solution without damaging the forceps.
●Ceramic’s low heat conductivity and high heat resistance allow it to hold parts in a flame for sterilizing or fabricating. Although the flame will
eventually reduce the strength of the ceramic tip, it will be minimal.
47
501207 . . . . . . . . . . . . . . .
US$
1:1
Forceps
9 cm (3.5 in.) long
Standard 501775 . . . . . . . . . .
US$
German
501775-G . . . . . . .
US$
30
1:1
54
Bishop Harmon forceps, 1 x 2 teeth
9 cm (3.5 in.) long
Standard 501776 . . . . . . . US$31
German 501776-G . . . .
Titanium
555053FT . . .
72
US$
156
US$
1:1
Tip Profile:
Graefe Forceps, 1 x 2 teeth
7 cm (2.75 in.) long, 1x2 teeth, curved 0.7 mm tips
Standard 14141 . .
31
US$
German
14141-G . . .
US$
90
14140-G . .
US$
1:1
Graefe Forceps, 1 x 2 teeth
7 cm (2.75 in.) long, straight 0.7 mm tips
Standard 14140 . . . .
30
US$
German 78
Tip Profile:
1:1
Titanium
108mm long
2mm OD rings
555827L . US$288
1:1
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
115
MICROSURGERY
Bishop Harmon forceps, serrated,
Straight Forceps
Length:
Tips:
MICROSURGERY
Titanium
115mm long
1 x 2, 0.12mm teeth
555047FT . . . . . .
269
US$
Straight Forceps
Length:
Titanium
115mm long
555007FT . . . . . .
202
US$
McPherson Forceps
Length:
Tips:
Titanium
11.5cm (4.5 in.)
7mm, tying, 45°angle
555009FT . . . . . .
221
US$
McPherson Forceps
Length:
Tips:
Titanium
8.5cm (3.3 in.)
angled, with tying platforms
555005FT . . . . . .
245
US$
Forceps
Length:
MICRODISSECTION
Tips:
Titanium
8.5cm long
12mm, straight with tying platforms
555001FT . . . . . . .
216
US$
Forceps
Length: 8.5 cm (3.3 in.)
straight with 0.12 mm teeth (1x2)
Tips:
Titanium
555041FT . . . . . . .
226
US$
Tip Profile:
Jewelers #7 Forceps
Length:
Tips:
110mm
0.07 x 0.01 mm
Titanium
555230F . . . . . . . .
67
US$
Jewelers #5 Forceps
Length:
Tips:
110mm, 45° bend
0.05 x 0.01 mm
Titanium
555229F . . . . . . . .
67
US$
Jewelers #5 Forceps
Length:
Tips:
110mm, 45° straight
0.01 x 0.06 mm
Titanium
555227F . . . . . . . .
67
US$
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
116
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Oval-Tipped Forceps
1mm OD flat oval tips
108mm long
555828L . . . .
Titanium
1:1
144
US$
MICRODISSECTION
Ring-Tipped Forceps
Forceps, large ring, 4.8mm ID,
6.0mm OD w/screw
503202 . . . .
44
US$
Ring-Tipped Forceps
Forceps, small ring, 2.2mm ID,
3.0mm OD w/screw
503203 . . . . US$47
Iris Forceps, 1 x 2 teeth
10 cm (4 in.) long, straight, 0.8 mm tips
Standard
German
15916 . . . . . . . . . . .
23
Tip Profile:
15916-G . . . . . . . . . .
US$
36
US$
1:1
Adson Forceps, 1 x 2 teeth
12 cm (4.75 in.) long
Standard
500178 . . . . . . .
German
500178-G . . . .
Tip Profile:
43
US$
1:1
108
US$
Adson Forceps, 1 x 2 teeth
12 cm (4.75 in.) long
Tip Profile:
Standard
500092 . . . . . .
US$
German
500092-G . . . .
US$
28
38
1:1
Micro Adson Tissue Forceps, 1 x 2 teeth
fine point, 12 cm (4.75 in.) long, 0.8 mm tips
Standard
501244 . . . . . . .
US$
German
501244-G . . . .
US$
34
50
Tip Profile:
1:1
Micro Adson Dressing Forceps, serrated
fine point, 12 cm (4.75 in.) long
Standard
501245 . . . . . . .
US$
German
501245-G . . . . .
US$
30
50
Tip Profile:
1:1
Tip Profile:
Adson-Brown Forceps
12 cm (4.75 in.) long, Tungsten Carbide
jaws with 7x7 side grasping teeth
Standard
500177 . . . . . . .
German
500177-G . . . .
46
US$
119
US$
1:1
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
117
MICROSURGERY
Tungsten Carbide jaws
Graefe Forceps, serrated
7cm (2.75 in.) long, straight 0.7 mm tips
14142 . . US$26
German Standard
MICROSURGERY
7cm long, curved 0.7 mm tips
Standard 501215 . US$28
German Iris Forceps, serrated
14142-G . . .
US$
61
501215-G . .
US$
1:1
43
Tip Profile:
10 cm (4 in.) long, straight 0.8 mm tips
Standard
German
15914 . . . . . . . . . . . .
20
15914-G . . . . . . . . . . .
US$
36
1:1
36
1:1
US$
Tip Profile:
Iris Forceps, serrated
10 cm (4 in.) long, curved 0.8 mm tips
Standard
German
15915 . . . . . . . . . . . .
22
15915-G . . . . . . . . . .
US$
US$
Tip Profile:
Iris Forceps, 1 x 2 teeth
10 cm (4 in.) long, curved 0.8 mm tips
German
Standard
15917 . . . . . . .
24
US$
15917-G . . . . . .
Adson Forceps, serrated
MICRODISSECTION
Tip Profile:
38
US$
1:1
Tip Profile:
12 cm (4.75 in.) long,
Tungsten Carbide jaws
Standard
500222 . . . .
German
500222-G . US$119
38
US$
1:1
Adson Forceps
Tips:
10mm with TC insert
Titanium
1:1
555243F . . . . . . . . . US$72
Adson Forceps, serrated
1:1
12 cm (4.75 in.) long
Tip Profile:
Standard 14226 . . . . .
US$
German 14226-G . .
US$
503311 . . . .
4 x 5 Teeth
14.5cm
26
35
34
US$
1:1
503313 . . . .
2 x 3 Teeth
14.5cm
25
US$
503312 . . . .
3 x 4 Teeth
14.5cm
29
US$
Tip Profile: 503311
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
118
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Tissue Forceps
12.5 cm (5 in.) long, 1 x 2 teeth
Standard
15918 . . . . .
German
15918-G . . . . . .
20
US$
30
US$
15 cm (6 in.) long, straight, 1 x 2 teeth
501742-G . . . . .
15 cm (6 in.) long, straight, 2 x 3 teeth
501741-G . . . . .
1:1
30
US$
30
US$
Graefe Fixation Forceps
Length: 11.5cm (4.5 in.)
Tips:
4mm wide, 5x5 teeth
501988 . . . . . .
1:1
34
US$
Dressing Forceps, serrated
Standard
German
15.5 cm (6 in.) long (pictured)
500363 . . . . . . . . US$22 500363-G . . .
Tip Profile:
40
US$
25.5 cm (10 in.) long
500364 . . . . . . . . US$22
500364-G . . .
US$
30.5 cm (12 in.) long
500365 . . . . . . . . US$22
500365-G . . .
US$
12.5 cm (5 in.) long
501217 . . . . . . . . . US$20
501217-G . . . .
US$
42
1:1
42
Length: 16 cm (4 in.)
503389 . . . . . . . .
108
US$
1:1
Micro Tweezer
German
15 cm (6 in.), serrated, angled
501727-G . . . . . . .
54
US$
1:1
Dressing Forceps, ultra fine, serrated
Tip Profile:
12.5 cm (5 in.), straight, sharp tips
15908 . . . . . . . . . . . . . . . . . . . US$30
12.5 cm (5 in.), straight, round tips
503283 . . . . . . . . . . . . . . . . . . US$25
1:1
Gillies Dissecting Forceps, 1 x 2 teeth
Standard
15.5 cm (6 in.) long
501266 . . . . . . US$32
German
501266-G . . . . . .
64
US$
15.5 cm (6 in.) long, Tungsten Carbide jaws
501265 . . . . . . US$43
501265-G. . . . . . . US$78
1:1
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
119
MICROSURGERY
41
Dressing Forceps
Titanium
MICRODISSECTION
12.5 cm (5 in.) long, curved, 1 x 2 teeth
501216-G . . . . . US$30
501216 . . . . US$20
McIndoe Dressing Forceps, serrated
Standard
15.5 cm (6 in.) long
501268 . . . . US$28
German
501268-G . . .
64
US$
15.5 cm (6 in.) long, Tungsten Carbide jaws
MICROSURGERY
501267 . . . .
501267-G . . .
64
US$
1:1
Special cupped forceps allow atraumatic
gripping of organs and other delicate tissue.
Teflon-Coated Cupped Forceps
Length: 15.25 cm (6 in.)
Tips:
3.5mm diameter
501983 . . . . . .
90
US$
1:1
Plastic-Coated Cupped Forceps
1:1
501984 Length: 12.5 cm (5 in.) Tips: 3.5mm diameter . . . . . . . . .
54
US$
Teflon-Coated Tweezers
Length: 110mm
Narrow tips, 0.25 x 0.098mm
Tips:
503361 . . . . . .
MICRODISSECTION
52 US$
30
US$
1:1
Russian Forceps
Length: 15.25cm (6 in.)
Tips:
serrated, oval, 7mm diameter
501987 . . . . . .
1:1
40
US$
Atraumatic teeth grip tissue,
vessels, and organs without
damage.
DeBakey Forceps
15 cm (6 in.) long,
delicate, jaw width 1.5 mm
Standard
501239 . . . . .
45 degree angled tip
501996 . . . .
German
72 US$
501239-G . . . . . .
72
US$
119
US$
1:1
Sterile Thumb Forceps
10.5 cm
Single use only.
503380
Pack of 10 . . . . . . .
503381
Pack of 100 . . . .
24
US$
1:1
138
US$
Rubber-tipped Forceps
Length: 21cm (8.25 in.)
Excellent for small animal handling.
503370 . . . . . .
34
US$
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
120
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Round-handled Forceps
By hollowing out the handles of long, round-handled instruments, the overall weight is decreased. This makes them efficient and non-fatiguing
when operating under a microscope. Made from high quality stainless steel, these instruments are an excellent addition to a microsurgical
instrument kit.
Length: 15 cm (6 in.)
Tips:
0.15 mm tips
bent at 45°
14209 . . . . . .
119
US$
Tip Profile:
1:1
Round, Hollow Handle Forceps
Length: 15 cm (6 in.)
Tips:
straight 0.15 mm
Standard German 14113 . . . . . . US$96
14113-G . . . US$150
1:1
Tip Profile:
Round, Hollow Handle Forceps
Length: 15 cm (6 in.)
Tips:
curved 0.3 mm tips
Standard
German Tip Profile:
MICRODISSECTION
Round, Hollow Handle Forceps
1:1
14114 . . . . . . . . US$94
14114-G . . . . . US$162
Dilator Forceps
15910 . . . . . . .
88
US$
Tip Profile:
1:1
Round, Hollow Handle Forceps
Length: 14 cm (5.5 in.)
straight 0.15 mm
Tips:
14211 . . . . . .
107
US$
1:1
Round, Hollow Handle Forceps
1:1
Length: 14 cm (5.5 in.)
Tips:
straight 0.15 mm tips
with tying platform
14079 . . . . . . .
86
US$
Round, Hollow Handle Forceps
Length: 14 cm (5.5 in.)
Tips:
straight 0.3 mm
14210 . . . . . .
1:1
107
US$
DeBakey Forceps
16 cm (6.25 in.) long, angled, micro,
jaw width 1.2 mm, atraumatic
503213 . . . . .
1:1
162
US$
16 cm (6.25 in.) long, micro,
jaw width 1.2 mm, straight, atraumatic
503212 . . . . .
161
US$
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
121
MICROSURGERY
Length: 14 cm (5.5 in.)
straight 0.15 mm tips
Tips:
Microintraocular forceps
MICROSURGERY
Length:14 cm (5.5 in.)
Jaws:2.5 x 0.3 x 0.25mm (lxwxt), 1.5mm maximum opening
500373 . . . . .
US$
500373-T . . .
US$
192
360
titanium handle
Length:14 cm (5.5 in.)
Jaws:3 x 0.6 x 0.4mm (lxwxt), 1.4mm maximum opening
US$
501212-T . . .
US$
360
1:1
titanium handle
Vessel Cannulation Forceps for 0.5mm diameter cannula, 10 cm (4 in.) long
500377 . . . . . .
83
US$
Tip Profile:
Vessel Cannulation forceps for 1.0 mm diameter cannula, 10 cm (4 in.) long
500453 . . . . .
83
US$
1:1
Great for gel handling
Filter Forceps
Polypropylene finger grip, 11 cm (4.3 in.) long,
straight flat jaw
500455 . . . . .
25
US$
1:1
Great for gel handling
Filter Forceps
MICRODISSECTION
Tip Profile:
192
501212 . . . . .
11 cm (4.3 in.) long, straight flat jaw
Standard
German
500456 . . . . .
29
US$
500456-G . . . .
41
US$
1:1
Micro Cannula
l 0.4mm O.D., 0.2mm I.D. tubing
l Autoclavable
l Biocompatible Perfluorocarbon tubing material
KZ1101
Micro Cannula, 3"
This micro cannula is ideal for placement in the
carotid or femoral artery of mice, rats, and other
small animal blood vessels. It can be used with a
pressure transducer (WPI’S BLPR2) for blood pressure
measurement, or in conjunction with a micro-syringe
injection system (like WPI’s UMP3 or MMP pumps).
The incorporated standard female luer fitting makes
connecting to existing experimental plumbing quick
96
US$
and easy. The cannula is provided with a contouredtip stainless steel stylet (trocar) to facilitate placement
using established techniques. A movable “shoulder”
ring provides a tie-in point to prevent accidental
removal. The cannula may be left in place for 2 hours
or more, and with proper care and cleaning, may be
re-used multiple times. Instructions for use included.
Horticultural Forceps
12.5 cm (5 in.) long
Wide, angled tips are only 0.4mm thick.
These forceps were designed for extracting
seedling plugs from horticulture trays without
damaging the fragile root system.
503411
Horticultural Forceps
30
US$
1:1
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
122
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Delrin Plastic Tweezers
11.8 cm (4.6 in.) long
503362 . . . . . .
4
US$
11 cm (4.3 in.) long, bent flat jaw
500457 . . . . . .
28
US$
Great for gel handling
1:1
Wafer Handling Forceps
11 cm (4.3 in.) long, angled 30° jaw
501303 . . . . . .
1:1
47
US$
Great for gel handling
Backhaus Towel Clamp
Standard
1:1
German
3.5”
501320 . . . .
US$
19
501320-G . . . . . .
US$
36
5.25”
501700 . . . .
US$
20
501700-G . . . . . .
US$
38
Standard German
12.5 cm (5 in.) long, straight, serrated, 0.4 x 0.8 mm tips
500451. .
44
US$
500451-G . . . . . . . .
Tip Profile:
56
US$
12.5 cm (5 in.) long, curved, serrated, 0.4 x 0.8 mm tips
500452 . US$42
500452-G . . . . . . . .
54
1:1
US$
Tip Profile:
Tip Profile:
1:1
Hartman Mosquito Hemostatic Forceps
Standard
Tip Profile:
German
15920
12.5 cm (5 in.) long, straight . . . .
US$
15921
12.5 cm (5 in.) long, curved . . . . .
US$
501705
9 cm (3.5 in.) long, straight . . . . .
US$
501291
9 cm (3.5 in.) long, curved . . . . . .
US$
Titanium 555222F 9 cm (3.5 in.) long, straight . . . .
US$
Titanium 555223F 9 cm (3.5 in.) long, curved . . . . .
US$
20
15920-G. . . . . . . . US$40
22
15921-G . . . . . . . . US$40
20
501705-G . . . . . . . US$40
22
501291-G . . . . . . . US$40
240
240
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
123
MICROSURGERY
Micro Hemostatic Forceps
MICRODISSECTION
Filter Forceps
Tip Profile:
Allis Tissue Forceps
MICROSURGERY
6”, 4x5 teeth
Standard 501324 . . . . . . . .
US$
German 501324-G . . . . . .
US$
38
77
1:1
Kelly Hemostatic Forceps
Standard
German
501241 Straight, 14 cm (5.5 in.) long . . . .
US$
501288 Curved, 14 cm (5.5 in.) long . . . .
US$
501714 Straight, 15.5 cm (6 in.) long . . . .
US$
501715 Curved, 15.5 cm (6 in.) long . . . .
US$
Tip Profile:
20
501241-G . . . . . .
US$
42
20
501288-G . . . . . .
US$
42
24
501714-G . . . . . .
US$
42
24
501715-G . . . . . .
US$
42
1:1
MICRODISSECTION
Tip Profile:
Tip Profile:
1:1
Crile Hemostatic Forceps
Tip Profile:
Standard
German
501242
Straight, 14 cm (5.5 in.) long . . . . US$20
501242-G . . . . . .
US$
501730
Curved, 14 cm (5.5 in.) long . . . . US$20
501730-G . . . . . .
US$
501712
Straight, 15.5 cm (6 in.) long . . . .
24
501712-G . . . . . . .
US$
501713
Curved, 15.5 cm (6 in.) long . . . . . US$24
501713-G . . . . . . .
US$
US$
42
42
42
42
Rochester-Oschner Hemostatic Forceps
Standard
German
501709
Straight, 14 cm (5.5 in.) long . . . . . .
US$
501710
Curved, 14 cm (5.5 in.) long . . . . . .
US$
501326
Straight, 16 cm (6.25 in.) long . . . .
US$
501711
Curved, 16 cm (6.25 in.) long . . . . .
US$
25
501709-G . . . . . . . . .
US$
25
501710-G . . . . . . . . .
US$
40
26
501326-G . . . . . . . . .
US$
26
501711-G . . . . . . . . .
US$
40
42
42
1:1
Tip Profile:
Tip Profile:
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
124
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Tip Profile:
Tip Profile:
Rochester-Carmalt Hemostatic Forceps
Standard
Tip Profile:
German
26
501243-G . . . . . . .
US$
26
501287-G . . . . . . . .
US$
32
501716-G . . . . . . . .
US$
32
501717-G . . . . . . . .
US$
501243
Curved, 16 cm (6.25 in.) long . .
US$
501287
Straight, 16 cm (6.25 in.) long . .
US$
501716
Curved, 20 cm (7.75 in.) long . .
US$
501717
Straight, 20 cm (7.75 in.) long . .
US$
48
48
56
56
Tip Profile:
Rochester-Pean Hemostatic Forceps
Standard
German
Straight, 16 cm (6.25 in.) long . . . .
501706
Curved, 16 cm (6.25 in.) long . . . . .
US$
24
501325-G . . . . . . .
US$
24
501706-G . . . . . . . .
US$
501707
Straight, 19 cm (7.5 in.) long . . . . . .
US$
501708
Curved, 19 cm (7.5 in.) long . . . . . .
US$
42
26
501707-G . . . . . . . .
US$
26
501708-G . . . . . . . .
US$
42
43
43
1:1
Mixter Hemostatic Forceps
Tip Profile:
“Baby”, right angle, 14 cm (5.5 in.) long
US$
German US$
501240-G . . .
38
72
8 cm
Micro Alligator Forceps
Standard German
8 cm (3 in.) shaft, 0.5 x 4.5 mm serrated jaw
500446 . . . . . . .
252
US$
500446-G . . . . . .
186
US$
Tip Profile:
Micro Crocodile Forceps
7.5 cm (3 in.) shaft, 3 mm serrated jaw
501211 . . . . . . . . .
85
US$
1:1
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
125
MICROSURGERY
501325
US$
Standard 501240 . . . . .
MICRODISSECTION
1:1
Spring Scissors
These squeeze-handle micro scissors can be used ambidextrously.
Vannas Scissors, Super Fine
MICROSURGERY
Length: 8 cm
Blades: straight 3 mm
Tips: 0.015 x 0.015 mm
Length: 8 cm
Blades: curved 3 mm
Tips: 0.015 x 0.015 mm
Tip Profile:
501778 . . US$215
Finest Tips in the World!
501839 . .
239
US$
1:1
Vannas Scissors
Length: 8.5 cm (3.3 in.)
Blades: straight 7mm Tips:
0.025 x 0.015 mm
Length: 8.5 cm (3.3 in.)
Blades: curved 7mm Tips:
0.025 x 0.015 mm
500086 . . . . . . . . . .
203
US$
1:1
501232 . . . . . . . . . . US$210
Vannas Scissors
Length:
Blades:
Tips:
Tip Profile:
8 cm (3 in.)
straight 5 mm
0.1 mm tips
Standard
1:1
German
14003 . . . . . . 150
14003-G . . . . . .
US$
234
US$
Vannas Scissors
MICRODISSECTION
Tip Profile:
Length:
Blades:
Tips:
Tip Profile:
8 cm (3 in.)
curved, 5 mm
0.1 mm tips
Standard
German
14122. . . . . . .
155
US$
14122-G . . . . . . .
1:1
239
US$
­­Student Vannas Scissors
Length: 9 cm
Blades: 8 mm long
Tips:
500 microns
501777 . . . . . . .
501930 . . . . . . .
Straight
Curved
83
83
US$
1:1
US$
Vannas Scissors, angled on flat
Length:
Blades:
Tips:
Tip Profile:
8 cm (3 in.)
angled, 5 mm
0.1 mm tips
501790. . . . . .
155
US$
1:1
Vannas Scissors
Length:
Blades:
Tips:
Tip Profile:
8 cm (3 in.)
45° angled to side, 5 mm
0.1 mm tips
Standard
1:1
German
500260 . . . . 167
US$
500260-G . . . .
238
US$
McPherson-Vannas Scissors
Length:
Blades:
Tips:
7 cm (2.75 in.)
straight 3 mm
0.1mm
14177 . . . . . . US$164
Length:
Blades:
Tips:
7 cm (2.75 in.)
curved 3 mm
0.1mm
501233 . . . . . US$172
1:1
Tip Profile:
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
126
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Micro Scissors­—Diamond Coated Blades
The special diamond coated blades will increase the longevity of the cutting
edge and improve the quality of the cut. Used to reduce wear on razor blades
and industrial metal cutting tools, this coating is now being used in biomedical
applications. Some studies have shown that even after double the normal usage
of the cutting implement, no blade wear was detected.
Length:
Blades:
Tips:
12 cm (4.75 in.)
straight, 8 mm
sharp, coated
503365 . . . .
US$
1:1
360
Micro Scissors
Length:
Blades:
Tips:
12 cm (4.75 in.)
curved, 8 mm
sharp, coated
503364 . . . .
US$
360
Vannas Scissors
Vannas Scissors
Length:
Blades:
Length:
Blades:
9 cm (3.5 in.)
straight, 6 mm
3 mm cutting edge
503371 . . . . . US$158
McPherson-Vannas Scissors
8 cm (3 in.)
straight 5 mm
0.1mm
Length:
Blades:
Tips:
8 cm (3 in.)
curved 5 mm
0.1mm
1:1
503372 . . . . . US$158
Standard
German
14124 . . . . . . US$150
14124-G . . . US$186
501234 . . . . . US$155
501234-G . US$239
Tip Profile:
1:1
These scissors have slightly rounded tips for blunt dissection.
McPherson-Vannas Scissors
Length:
Blades:
Tips:
8 cm (3 in.)
sraight, 3 mm
0.22 mm rounded tips
Tip Profile:
1:1
503215 . . . . . US$124
McPherson-Vannas Scissors
Length:
Blades:
Tips:
8 cm (3 in.)
curved, 5 mm
0.3 mm rounded tips
Tip Profile:
1:1
Tip Profile:
1:1
503217 . . . . . US$124
McPherson-Vannas Scissors
Length:
Blades:
Tips:
8 cm (3 in.)
angled on flat, 5 mm
0.5 mm rounded tips
503216 . . . . . US$124
McPherson-Vannas Scissors
Length:
Blades:
Tips:
8 cm (3 in.)
45 angled to side, 5 mm
0.22 mm rounded tips
Tip Profile:
1:1
503214 . . . . . US$124
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
127
MICROSURGERY
Length:
Blades:
Tips:
9 cm (3.5 in.)
curved, 6 mm 3 mm cutting edge
MICRODISSECTION
Micro Scissors
l Hardness of coated surface resists wear and
increases life of cutting edge
l Anti-reflective coating resists glare and assists
in better view of surgical field
l Coating is corrosion resistant
l Reduced friction at cutting site decreases
necrosis of surrounding tissue and bone
Spring Scissors
Length:
Blades:
14 cm (5.5 in.)
straight 8 mm
Standard 15905 . . . . . . US$66
German
15905-G . . . US$144
MICRODISSECTION
MICROSURGERY
Length:
Blades:
14 cm (5.5 in.)
curved 8 mm
1:1
Standard 15906 . . . . . . US$66
German
15906-G . . . US$144
Tip Profile:
Spring Scissors, SuperCut
one edge micro serrated, one edge honed to
the sharpness of a knife edge
Length:
Blades:
12 cm (5 in.)
straight 9mm
501924 . . . . .
Length:
Blades:
227
US$
1:1
12 cm (5 in.)
curved 9mm
501925 . . . . .
227
US$
Spring Scissors
Tip Profile:
Length: 10.5 cm (4 in.)
Blades: straight 8 mm
Standard
German
Length: 10.5 cm (4 in.)
Blades: curved 8 mm
14127 . . . . . . US$113
501235 . . . . . US$107
14127-G . . . US$143
1:1
Spring Scissors
Length: 12 cm (4.75 in.)
Blades: straight 12 mm extra fine and long
Standard
14125 . . . . . . . .
US$
German
14125-G . . . . . US$
162
264
Length: 12 cm (4.75 in.)
Blades: curved 12 mm extra fine and long
14126 . . . . . . . .
1:1
Tip Profile:
162
US$
Noyes Scissors, sharp/sharp tips
Standard
German
500228 12 cm long, straight 15 mm blades . . US$54
501236 12 cm long, curved 15 mm blades . . . US$54 500228-G . . . US$119
501236-G . . . US$166
501237 14 cm long, straight 20 mm blades . . . US$54
501238 14 cm long, curved 20 mm blades . . . US$54
503305 12 cm long, straight, sharp/blunt . . . . US$52
503306 12 cm long, straight, blunt/blunt . . . . . US$52 1:1
Spring Scissors, round handles
Length:
Blades:
14 cm (5.5 in.)
straight 6.5 mm
Standard
14111 . . . . . .
US$
German
14111-G . . . .
US$
101
150
1:1
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
128
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Titanium Instruments
● 100% non-corrosive (great for seawater procedures)
● 100% non-magnetic (MRI compatible)
● 40% lighter than stainless steel (reduces hand fatigue)
● Forcep tips coated with tungsten carbide for increased gripping power
● Anodized, non-glare blue finish
MICRODISSECTION
Castroviejo Straight Scissors
Length:
Tips:
Titanium
105mm long
11mm
555530S . . . . US$288
Castroviejo Curved Scissors
Length:
Tips:
Titanium
112mm long
11mm, blunt
555526S . . . . US$283
Castroviejo Curved Scissors
Length:
Tips:
Titanium
116mm long
16mm, blunt
555525S . . . . US$283
MICROSURGERY
Castroviejo Curved Scissors
Length:
Tips:
Titanium
105mm long
small
555524S . . . . US$307
Castroviejo Curved Scissors
Length:
Tips:
Titanium
116mm long
strong curve
555523S . . . . US$307
Vannas Scissors
Length:
Tips:
Titanium
8cm long
straight, 3mm
14364 . . . . . . . US$240
Vannas Scissors
Length:
Tips:
Titanium
108mm long
straight, sharp, 10.5mm
555580S . . . . US$283
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
129
Mcpherson-Westcott Stitch Scissors
Length:
Tips:
MICROSURGERY
Titanium
105mm long
10.5 long
555540S . . . . US$254
Westcott Stitch Scissors
Length:
Tips:
115mm long
19, curved
Titanium
555541S . . . . . .
254
US$
Westcott Curved Scissors
Length:
Tips:
110mm long
blunt, 19mm, curved
Titanium
555621S . . . . . US$288
MICRODISSECTION
Westcott Curved Scissors
Length:
Tips:
115mm long
blunt, 21mm, curved
Titanium
555620S . . . . US$254
Vannas Scissors
Length:
Tips:
Titanium
82mm long
sharp, 9.5 angled to side
555647S . . . . US$264
Vannas Scissors
Length:
Tips:
Titanium
82mm long
sharp tips angled, 9.5mm
555641S . . . . . US$240
Vannas Scissors
Length:
Tips:
Titanium
82mm long
sharp tips straight, 9.5mm
555640S . . . . US$240
Vannas Scissors
Length:
Tips:
Titanium
108mm long
extra thin 13 mm straight blades, sharp
555600S . . . . US$307
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
130
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Vannas Scissors
Length:
Tips:
Titanium
95mm long
angled sharp, 10.5mm
555584S . . . . US$283
MICRODISSECTION
Vannas Scissors
Length:
Tips:
Titanium
95mm long
curved, sharp, 12.5mm
555583S . . . . US$307
Mcpherson-Westcott Scissors
Length:
Tips:
105mm long
curved, blunt
Titanium
555500S . . . . .
221
US$
Iris Scissors
Length:
Tips:
105mm long
Sharp, 11mm curved
Titanium
555562S . . . . US$245
Iris Scissors
90mm long
Sharp, 11mm curved
Titanium
555561S . . . . . US$226
MICROSURGERY
Length:
Tips:
Iris Scissors
Length:
Tips:
Titanium
90mm long
Sharp, 11mm straight
555560S . . . . .
221
US$
Spring Scissors, round handles
Length:
Blades:
14 cm (5.5 in.)
curved 7 mm
Standard
14112 . . . . . .
US$
German
14112-G . . . .
US$
101
174
Tip Profile:
1:1
Spring Scissors, sharp/sharp tips
Length: 9.5 cm (3.7 in.)
Blades: straight, 6 mm
1:1
503308 . . . . US$119
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
131
Spring Scissors, blunt/blunt tips
Length: 9.5 cm (3.7 in.)
Blades: straight, 6 mm
1:1
MICROSURGERY
503309 . . . . US$119
Spring Scissors, sharp/ball tips
Length: 9.5 cm (3.7 in.)
Blades: straight, 6 mm
1:1
503310 . . . . . US$119
Ring Scissors
MiniDissecting, Left Hand
9 cm long, curved
503626 . . . . . . . . . . . US$43
9 cm long, straight
MICRODISSECTION
503625 . . . . . . . . . . . US$42
LE F
!
S
E
TI
MiniDissecting, Left Hand
9 cm long, curved, fine tips
503627 . . . . . . . . . . . . US$43
9 cm long, straight, fine tips
503628 . . . . . . . . . . . US$42
Goldman-Fox Scissors
Curved, serrated tips — 13 cm long
503256 . . . . . . . . . . . US$66
1:1
1:1
Kilner Scissors
Flat tips, 14 cm long
503307 . . . . . . . . . . . . US$34
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
132
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Mini Dissecting Scissors
sharp medium tips, #4 - 9.5cm long
Sharp Tips, - 9.5 cm long,
503243 . . . . . . US$29
503245 . . . . . . . .
43
US$
Dissecting Miniature Scissors
9.5 cm long, sharp fine tips, square handle #3
503242 . . . . . . . . . . . . US$31
Scissors, La Grange - S-shaped, S/S - 11 cm long,
503246 . . . . . . .
66
US$
MICROSURGERY
Potts-Smith Scissors
Angled 45 degrees, 18cm long
503250 . . . . . . . . . . . . US$59
Potts-Smith Scissors
Potts-Smith Scissors
Angled 60 degrees, 18cm long
Angled 25 degrees, 18cm long
503251. . . . . . . . . . . . . US$59
503249 . . . . . . . . . . . . US$59
Wilmer Iris Scissors - Angled on flat, 10.5 cm 503248 . . . . . . .
Dissecting Miniature Scissors
Round tips, square handle #5
503244 . . . . . . . . . . . . US$31
59
US$
Plastic Surgery Scissors
Stainless Steel, 11cm long
503247 . . . . . . . . . . . . US$47
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
MICRODISSECTION
Scissors, Mini Dissecting
133
Tip Profile:
2.2 cm
Dissecting Scissors
MICRODISSECTION
MICROSURGERY
1:1
Standard
14393
14394
15922
15923
German
14393-G . . . . . . US$42
14394-G . . . . . US$43
15922-G . . . . . . US$36
15923-G . . . . . . US$36
10 cm (4 in.) straight . . . US$22
10 cm (4 in.) curved . . . . US$22
12.5 cm (5 in.) straight . US$22
12.5 cm (5 in.) curved . . US$22
Tip Profile:
Iris Scissors
Length:
11 cm (4.3 in.)
Blades:
straight
Standard
German
501758 . . . . . . US$26
501758-G. . . . . . . . .
US$
501759-G. . . . . . . . .
US$
Length:
Blades:
Tip Profile:
2.2 cm
47
1:1
11 cm (4.3 in.)
curved
501759 . . . . . . US$26
Tip Profile:
47
Iris Scissors
Length:
Tips:
Titanium
11cm long
straight pointed, 32mm
555646S . . . . US$230
Iris Scissors
Tip Profile:
Length:
11.5 cm (4.5 in.)
straight, Tungsten Carbide
Blades:
Standard
German
500216 . . . . . . US$53
Length:
Blades:
53
US$
1:1
500216-G . . . . . . US$107
11.5 cm (4.5 in.)
curved, Tungsten Carbide
500217 . . . . . . 1:1
2.3 cm
500217-G. . . . . . .
Tip Profile:
107
US$
Scissors, Mini Dissecting
sharp fine tips
503241 . . . . . . . . . . . . US$31
Scissors, Mini Dissecting
Regular tips, curved
503240 . . . . . . . . . . . . US$31
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
134
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]iinc.com
1:1
Iris Scissors, SuperCut
one edge micro serrated, one edge honed to the sharpness of a knife edge
10 cm (4 in.)
German
14218 . . . US$54
14218-G . . US$80
Curved
14219 . . . . US$55
14219-G . . US$82
1:1
Shown: 10 cm, straight
2.3 cm
11.5 cm (4.5 in.)
Straight
503259 . US$59
Curved
503260 . . US$65
Tip Profile:
Iris Scissors, SuperCut
one edge micro serrated, one edge honed to the sharpness of a knife edge
12.5 cm (5 in.)
Standard
Straight
14225 . . . .
US$
Curved
14224 . . . .
US$
German
55
14225-G . . . . . US$78
58
14224-G . . . . . US$80
14 cm (5.5 in.)
Straight
503261....... US$71
Curved
503262.......US$77
1:1
Shown: 12.5 cm, straight
3 cm
Tip Profile:
Iris Scissors, SuperCut Tungsten Carbide
These are the finest scissors available. They combine the precise cutting action of the razor-sharp
SuperCut blades with the durability of Tungsten Carbide. They will provide a clean, smooth cut
and retain their sharpness for an extended period of time.
11 cm (4.3 in.) long
Straight
501263 . . . . . . . US$102
German
501263-G . . . . . US$166
1:1
MICROSURGERY
Standard
2.5 cm
Tip Profile:
Curved
Standard
501264 . . . . . . . US$102
501264-G . . . . US$205
Ribbon Handle Iris Scissors
Larger ring handles for ease of use
11 cm (4.3 in.) long
Straight
501767 . . US$49
Curved
501768 . . . US$50
1:1
2.5 cm
Tenotomy Scissors, SuperCut
One edge micro serrated, one edge honed to the sharpness of a knife edge
MICRODISSECTION
Standard
Straight
Standard
German
10 cm (4 in.)
Straight 14395 . . .
US$
55
14395-G . . . .
Curved 14396 . . .
US$
US$
56
14396-G . . . .
US$
11.5 cm (4.5 in.)
Straight 503263 .
US$
Curved 503264 .
US$
78
78
1:1
59
1 cm
Shown: 10 cm, straight
65
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
135
Tenotomy Scissors
Standard
12.5 cm (5 in.), Straight
14220 . . .
US$
Curved
14221 . . .
US$
14 cm (5.5 in.)
Straight
503265 . US$71
Curved
503266 . US$77
German
Tip Profile:
56
14220-G . . . .
US$
78
56
14221-G . . . .
US$
78
1:1
MICROSURGERY
1 cm
Straight
503267 .
US$
Curved
503268 .
US$
Metzenbaum Scissors
Shown: 12.5 cm, straight
82
16 cm (6.2 in.)
88
Standard
German
11.5 cm (4.5 in.)
Straight
501747 . . . US$22
501747-G . . . . . US$38
Curved
501748 . . . US$
22
501748-G . . . . US$38
14.5 cm (5.75 in.) Straight
501252 . . US$
22
501252-G . . . . US$38
501253 . . US$
22
501253-G . . . . US$38
Curved
3.5 cm
17.5 cm (7 in.)
Straight
501254......
US$
Curved
501255 . . US$
22
501254-G . . . .
US$
22
501255-G . . . .
US$
Metzenbaum Scissors, Carbide Blades
MICRODISSECTION
1:1
Standard
11.5 cm (4.5 in.)
Straight
Curved
501739 . . . US$66
501740 . . . US$66
42
42
Carbide is a harder metal than stainless steel and
will retain its sharpness longer
German
501739-G . . .
501740-G . . .
119
119
US$
US$
1:1
3.5 cm
Shown: 14.5 cm, straight
14.5 cm (5.75 in.) Straight
501733 . . . US$66
501733-G . . .
US$
Curved
501734 . . . US$68
501734-G . . .
US$
18 cm (7 in.)
Straight
Curved
501744 . . . US$70
501745 . . . US$70
501744-G . . .
501745-G . . .
US$
Metzenbaum Scissors, SuperCut
119
119
119
119
US$
Also in Titanium
Standard
German
59
11.5 cm (4.5 in.), Straight503269 . . .
US$
Curved 503270 . . . .
US$
12.5 cm (5 in.)
Straight14214 . . . . .
US$
65
56
14214-G . . US$80
56
14215-G . . Curved 14215 . . . . .
US$
16 cm (6.2 in.)
Straight503271 . . . .
US$
Curved 503272 . . . .
US$
20 cm (7.75 in.)
Straight503273 . . . .
US$
Curved 503274 . . .
US$
25 cm (9.75 in.)
Straight503275 . . .
US$
Curved 503276.......US$126
82
US$
14cm long (5.5 in.), curved tip 503383 . . . . . .
US$
14cm long (5.5 in.), straight tip 503382 . . . . . .
US$
175
165
One edge micro serrated, one edge honed
to the sharpness of a knife edge
82
88
94
100
1:1
3 cm
Tip Profile:
106
Mayo Harrington Scissors
Titanium
Length:
Tips:
14.5 cm (5.75 in.)
straight, 32 mm
555659S . . . US$120
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
136
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Metzenbaum Scissors, SuperCut Tungsten Carbide
These are the finest scissors available. They combine the precise cutting action of the razor-sharp
SuperCut blades with the durability of Tungsten Carbide. They will provide a clean, smooth cut and
retain their sharpness for an extended period of time.
4 cm
Standard
15cm long Curved
501261. . . . .
US$
German
501262. . . . .
US$
501261-G. . . . . US$206
503359-G. . . . . US$206
102
501262-G. . . . . US$208
15cm long Straight
18cm long Curved
Tip Profile:
102
Mayo Scissors
Standard
German
14 cm (5.5 in.)
Straight
501749 . . . . . US$22
501749-G . . . . . .
US$
Curved
501750 . . . . . 501750-G . . . . . .
US$
22
US$
38
38
1:1
4.5 cm
17 cm (6.75 in.)
Straight
501751 . . . . . .
US$
Curved
501752 . . . . . US$
22
501751-G . . . . . .
US$
23
501752-G . . . . . .
US$
MICRODISSECTION
1:1
41
41
Carbide is a harder metal than stainless
steel and will retain its sharpness longer
Tip Profile:
4 cm
Standard
1:1
German
14 cm (5.5 in.)
Straight
500218 . . . . . US$70
500218-G . . . . . . . US$101
Curved
500219 . . . . . US$74
500219-G . . . . . . . US$101
17.5 cm (7 in.)
Straight
500220 . . . . . US$74
500220-G . . . . . . . US$101
Curved
500221 . . . . . 500221-G . . . . . . . US$104
74
US$
Mayo Scissors, SuperCut
One edge micro serrated, one edge honed to the sharpness of a knife edge
Standard
German
14 cm (5.5 in.)
Straight
14216 . . . US$54
14216-G . . . . US$86
Curved
14217 . . . US$54
14217-G . . . . US$86
Tip Profile:
1:1
4.2 cm
16 cm (6.3 in.)
Straight
503277 . . . . . . . .
US$
Curved
503278 . . . . . . . .
US$
82
20 cm (7.8 in.)
Straight
503279 . . . . . . . .
US$
Curved
503280 . . . . . . .
US$
25 cm (9.8 in.)
Straight
503281 . . . . . . .
US$
Curved
503282 . . . . . . .
US$
88
94
100
106
126
Also in Titanium
17 cm long (6.75 in.) supercut, straight tip 503384. . . . . US$214
17 cm long (6.75 in.) supercut, curved tip
503385. . . . .
202
US$
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
137
MICROSURGERY
Mayo Scissors, Tungsten Carbide Blades
Operating Scissors
11.5 cm (4.5 in.) Straight
Standard
German
501753 Sharp/Blunt . . . . . . . . . . . US$20
501753-G . . . . . US$40
501754 Sharp/Sharp . . . . . . . . . . . US$
20
501754-G . . . . . US$40
501743 Blunt/Blunt . . . . . . . . . . . . US$
20
501743-G . . . . . US$40
20
501755-G . . . . . 4 cm
MICROSURGERY
11.5 cm (4.5 in.) Curved
501755 Sharp/Sharp . . . . . . . . . . . US$
501756 Sharp/Blunt . . . . . . . . . . . US$20
501756-G . . . . . US$40
501757 Blunt/Blunt . . . . . . . . . . . . US$20
501757-G . . . . . US$40
14 cm (5.5 in.) Curved
501220 Sharp/Sharp . . . . . . . . . . . US$22
501220-G . . . . . US$38
501221 Sharp/Blunt . . . . . . . . . . . US$22
501221-G . . . . . US$40
22
501222-G . . . . . US$38
Sharp/Blunt . . . . . . . . . . . US$22
14192-G . . . . . . US$40
501222 Blunt/Blunt . . . . . . . . . . . . US$
14 cm (5.5 in.) Straight
14192
501218 Sharp/Sharp . . . . . . . . . . . 22
501218-G . . . . . US$40
501219 Blunt/Blunt . . . . . . . . . . . . US$22
501219-G . . . . . US$40
US$
5 cm
14192
Sharp/Blunt
Tip Profiles:
MICRODISSECTION
40
US$
Sharp/Sharp
Blunt/Blunt
1:1
16 cm (6.25 in.) Straight
Standard
German
501223 Sharp/Blunt . . . . . . . . . . . US$
501224 Blunt/Blunt . . . . . . . . . . . . US$
501225 Sharp/Sharp . . . . . . . . . . . US$
22
501223-G . . . . . US$38
22
501224-G . . . . . US$38
22
501225-G . . . . . US$38
501226 Sharp/Blunt . . . . . . . . . . . US$22
501226-G . . . . . US$38
501227 Blunt/Blunt . . . . . . . . . . . . US$22
501227-G . . . . . US$38
501228 Sharp/Sharp . . . . . . . . . . . US$22
501228-G . . . . . US$38
16 cm (6.25 in.) Curved
18 cm (7 in.) Straight
15924
Sharp/Sharp . . . . . . . . . . US$23
15924-G . . . . . . US$53 500378 Sharp/Blunt . . . . . . . . . . . US$23
500378-G . . . . . US$49
500379 Blunt/Blunt . . . . . . . . . . . 24
500379-G . . . . . US$53
501229 Sharp/Blunt . . . . . . . . . . . US$23
501229-G . . . . . US$46
501230 Blunt/Blunt . . . . . . . . . . . US$
23
501230-G . . . . . US$46
501231 Sharp/Sharp . . . . . . . . . . US$
23
501231-G . . . . . US$46
US$
15924
18 cm (7 in.) Curved
1:1
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
138
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Iris Scissors, SuperCut Angled
One edge micro serrated, one edge honed
to the sharpness of a knife edge
2.5
10 cm long
1:1
cm
500046 . . . . . US$61
Tip Profile:
Angled Scissors
4
14 cm long
30° angled to side
sharp/sharp tips
Standard
500047 . . . . . .
US$
German
500047-G . . . .
US$
cm
1:1
20
56
Spencer Stitch Scissors
Standard
500380
501703
501704
German
500380-G. . . . . . .
501703-G. . . . . . . .
501704-G. . . . . . . .
9 cm (3.5 in.) long. . . . . . . . US$26
10.75 cm (4.25 in.) long. . . US$30
13.25 cm (5.5 in.) long . . . . US$34
54
58
US$
58
US$
MICRODISSECTION
30° angled to side
US$
1:1
MICROSURGERY
1:1
Lister Bandage Scissors
Standard
German
500444
15 cm (6 in.) long, 4cm long blades . .
US$
26
500444-G . . . . . . . . . . . .
501701
8.75 cm (3.5 in.) long . . . . . . . . . . . . . .
US$
19
501701-G. . . . . . . . . . . . . US$42
501702
10.75 cm (4.25 in.) long . . . . . . . . . . . .
US$
555656S
15 cm (6 in.) long Titanium . . . . . . .
50
22
501702-G. . . . . . . . . . . . . US$42
US$
144
US$
Utility Scissor 5.5”
1:1
Standard
501322 . . . . . . . . . US$18
German
501322-G. . . . . . US$35
Variety of colored handles available!
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
139
Mayo Scissors, SuperCut Tungsten Carbide
These are the finest scissors available. They combine the precise cutting action of the razor-sharp
SuperCut blades with the durability of Tungsten Carbide. They will provide a clean, smooth cut
and retain their sharpness for an extended period of time.
MICROSURGERY
1:1
5.5 cm
Tip Profile:
Straight, 17 cm (6.75 in.) long
Curved, 17 cm (6.75 in.) long . . . . Standard
501259 . . . . . US$102
Standard 501260 . . . . . US$102
German
501259-G . . German
501260-G . . US$211
210
US$
Straight
Standard 500366 . . . . . .
US$
500366-G . . . .
US$
German 500367 . . . . . .
US$
500367-G . . . .
US$
2.5 cm
38
1:1
66
Curved
38
68
Tip Profile:
Ceramic Zirconia Scissors
MICRODISSECTION
Tip Profile:
Eye Scissors, Blunt, Probe Points, 10 cm (4 in.)
Developed for applications where metal
components were used, these scissor blades
are made of a high tech ceramic second in
hardness only to diamond.
The ultra sharp blades cut with precision and
accuracy and maintain their razor sharp edge
for an extended time.
Perfect for use in
environments where rust
and corrosion is a problem.
Safe for light duty
electrical use.
l Ceramic blades hold their sharp edge up to 100 times longer than
conventional stainless steel.
l Non-corrosive
l No electrical static discharge
l Non-magnetic
l Can be used in high temperature environments
l No metal contamination
1:1
Ceramic Scissors
5.5” long, 2-inch ceramic blades, straight
501256. . . . . .
58
US$
Tip Profile:
Roger Wirecutting Scissors
12 cm (4.75 in.) long
notched blade
Standard
501321 . . .
28 US$
German
1:1
501321-G . . . . US$53
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
140
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Scissors, Round handled
14 cm (5.5 in.)
round Hollow handles
curved blades
1:1
Tip Profile:
Scissors, Round handled
14 cm (5.5 in.)
round Hollow handles
straight blades
1:1
14212 . . . . . . US$162
Microintraocular scissors
Tip Profile:
14 cm (5.5 in.)
30° angled blades
1:1
500372 . . . . . US$192
500372-T . . .
384
US$
titanium handle
MICRODISSECTION
14208 . . . . . . US$162
Microintraocular scissors
500374 . . . . . US$192
Tip Profile:
1:1
Microintraocular scissors
14 cm (5.5 in.)
90° angled blades
500376 . . . . . US$192
1:1
Tip Profile:
Barraquer Iris Scissors
6 cm (2.5 in.) long
7 mm blades, sharp points
Standard 14128 . . . . . .
US$
German 14128-G . . .
US$
107
179
Tip Profile:
1:1
Biemer scissors
straight, 13 cm (5 in.)
500381. . . . . .
106
US$
Tip Profile:
1:1
Cuts vessels perpendicularly and without slipping.
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
141
MICROSURGERY
14 cm (5.5 in.)
35° angled blades
Care & Handling of Surgical Instruments
MICRODISSECTION
MICROSURGERY
The proper care and handling of your valuable surgical instruments
will improve their longevity and function. Choose a protocol
appropriate for your environment from these cleaning techniques.
RINSING
Immediately after use, rinse instruments under
warm or cool running water to remove all
blood, body fluids and tissue. Dried soils may
damage the instrument surface and make
cleaning very difficult. Do not use hot water as
this will coagulate proteinous substances.
CLEANING TECHNIQUES
Time, temperature, and agitation play important
roles in the cleaning process.
Time — the efficiency of cleaning chemicals is
often time dependant
Temperature — higher temperature cleaning
solutions result in better cleaning
Agitation — whether manual or ultrasonic, it is
helpful in loosening the soil on the surface of
the instrument
A. Ultrasonic Cleaning
This is the most effective
cleaning method. Ultrasonic
cleaning is the result of
cavitation. The vibrating
sound waves create micronsize bubbles in the solution
that grow with the alternating
pressure. When they reach
a resonant size, the bubbles
implode creating a force that dislodges dirt and
particles, even in the smallest of crevices. The
use of an ultrasonic detergent greatly improves
the rate of cavitation as opposed to plain water.
1. Mix enzymatic (Enzol —
WPI part number 7363),
or other neutral pH or
mild alkaline detergent
(Alconox — WPI part number
13740) per manufacturer
recommendations.
2. Use deionized water, if
available.
3. Run ultrasonic cleaner for
several minutes to degas the
solution and obtain correct
temperature.
4. Place instruments in open position into the
ultrasonic cleaner. Do not allow instruments
with sharp blades to touch other instruments. All
instruments must be fully submerged.
5. Do not place dissimilar metals (stainless,
copper, chrome plated, etc.) in the same
cleaning cycle.
6. Instruments should be processed in the
cleaner for 5 to 10 minutes.
7. Rinse instruments with water to remove
ultrasonic cleaning solution and any remaining
soils.
8. Dry instruments thoroughly with a clean
towel. This minimizes the risk of corrosion and
formation of water spots.
9. Use spray lubricant (WPI part number
500126) in the hinges to improve
function of instrument.
B. Automatic Washer Sterilizers
Follow manufacturer’s
recommendations. Lubricate
instruments after last rinse cycle and
before sterilization cycle.
C. Manual Cleaning
1. Use stiff plastic cleaning brushes.
Do not use steel wool or wire
brushes.
2. Use only neutral pH detergents. If not rinsed
properly, low pH detergents may breakdown
the stainless protective surface and cause
black staining. High pH detergents may cause
surface deposits of brown stains, which can
interfere with the smooth operation of the
instrument.
3. Brush delicate instruments
carefully and, if possible, handle
them separately from general
instruments.
4. Inspect all instrument surfaces to
ensure they are visibly clean and
free of stains and tissue.
Inspect each instrument for proper
function and condition. Scissor blades
should glide smoothly and the blades
must not be loose when in closed position.
Check that forceps tips are properly aligned.
Hemostats and needle holders should not show
light between the jaws, they should lock and
unlock easily, and the joints should not be too
loose. Check needle holder jaws for wear. Examine cutting instruments and knives to be sure
their blades are sharp and undamaged.
5. Rinse instruments thoroughly under running
water. While rinsing, open and close scissors,
hemostats, needle holders and other hinged
instruments to ensure that hinge areas are also
rinsed.
6. Dry instruments thoroughly with a clean
towel. This minimizes the risk of corrosion and
formation of water spots. Use spray lubricant
(WPI part number 500126) in the
hinges to improve function of
instrument.
D. Soaking
Large, non-delicate instruments
can be soaked in a corrosion
inhibiting detergent (Alconox —
WPI part number 13740) when
other cleaning methods are not
practical. Rinsing and drying
after soaking is recommended.
STERILIZING
A. Autoclaving
1. Lubricate all instruments that have any metalto-metal action such as scissors, hemostats,
needle holders, self retaining retractors, etc.
Surgical instrument lubricants (WPI part number
500126) should be used.
Do not use WD-40 oil or other industrial
lubricants.
2. Instruments may be autoclaved individually
or in sets.
a. Individual instruments—Disposable paper or
plastic pouches are ideal. Use a wide enough
pouch (4" or wider) for instruments with ratchet
locks (such as needle holders and hemostats)
so the instrument can be sterilized in anopen
(unlocked) position.
b. Instrument Sets—Unlock all instruments and
sterilize them in an open position. Place heavy
instruments on bottom of set (when two layers
are required).
3. Never lock an instrument during autoclaving.
This will prevent the steam from reaching
and sterilizing the metal-to-metal surfaces.
Furthermore, heat expansion during autoclaving
can cause cracks in hinge areas.
4. Do not overload the autoclave chamber, as
this may also hinder steam penetration.
5. Place a towel on bottom of pan to absorb
excess moisture during autoclaving.
6. At the end of the autoclave cycle (before the
drying cycle) unlock autoclave door and open it
no more than a crack (about 3/4"). Run dry cycle
for the period recommended by the autoclave
manufacturer. If the autoclave door is opened
fully before the drying cycle, cold room air will
rush into the chamber, causing condensation on
the instruments. This will result in water stains
on instruments and also cause wet packs.
B. Cold Sterilization
Most cold sterilization solutions require a 10hour immersion to render instruments sterile,
but this prolonged chemical action may be more
detrimental to surgical instruments than the
20-minute autoclave cycle. If the instruments
need only to be disinfected (basically clean),
cold sterilization is acceptable since disinfection
will take place in only 10 minutes.
But to render the instruments sterile (with
absolutely no living organism surviving),
autoclaving is recommended.
For instruments with tungsten carbide inserts
(needle holders, scissors, tissue forceps), do not
use solutions containing benzyl ammonium
chloride which will destroy the tungsten carbide
inserts.
STORAGE
Instruments should be stored in a clean and dry
environment until use.
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
142
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Needle Holders
1:1
Needle Holder
Standard 14081 . . . . . .
German 14081-G . .
Standard
503355 . . . .
91
US$
210
US$
96 with lock
US$
1:1
20 cm (7.75 in)
Standard
503354 . . .
102
with lock
US$
Tip Profile:
Needle Holder
Tip Profile:
12.5 cm (5 in.) long
round handles
0.4 mm tips
curved smooth jaws
14132 . . . . . . . . .
102
US$
1:1
13 cm (5 in.) long
straight 1 mm wide serrated tips
Standard 14133 . . . . . . .
German 14133-G . . . .
1:1
89
US$
Tip Profile:
150
US$
Castroviejo Needle Holder
14 cm (5.5 in.) long, with lock
Straight 1.2‑mm wide serrated tips
Standard 14137 . . . . . . . . .
German 79
US$
14137-G . . . . . .
US$
Titanium 555419NT . . .
US$
1:1
150
163
Serrated Tungsten Carbide jaws
Straight with lock
Standard 500223 . . . . .
German 500223-G .
US$
Tip Profile:
97
Smooth tips, 1.2‑mm wide
180
US$
Straight 503257 . . . . . . .
US$
Curved 503258 . . . . . . .
US$
82
84
1:1
Micro Castroviejo Needle Holder
9cm long, 0.5cm round tips with diamond dust
Straight
503376. . . . . . . .
US$
Curved
503377. . . . . . . .
US$
180
192
Tip Profile:
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
143
MICROSURGERY
Stevens Needle Holder
MICRODISSECTION
14 cm (5.5 in.) long
round handles
0.4 mm tips, curved smooth jaws
Needle Holder
MICRODISSECTION
MICROSURGERY
14 cm (5.5 in.) long
round handles
0.3 mm tips, straight smooth jaws
Standard 14080 . . . . . . .
German 14080-G . . .
97
US$
174
US$
1:1
Titanium
14 cm (5.5 in.) long, straight smooth jaws
14361 . . . . . .
239
US$
Tip Profile:
14 cm (5.5 in.) long, curved smooth jaws
501923 . . . . .
239
US$
Needle Holder
12.5 cm (5 in.) long
straight serrated jaws
extra delicate
Standard 14109 . . . . . . US$22
German 14109-G . . . US$72
Tip Profile:
1:1
Needle Holder
14 cm (5.5 in.) long
straight serrated jaws
Standard
14110 . . . . .
US$
German 14110-G . .
US$
22
Tip
Profile:
72
1:1
Needle Holder
14 cm (5.5 in.) long
straight serrated Tungsten Carbide jaws
Standard
15926 . . . . . . . US$62
German 15926-G . .
106
US$
1:1
Tip Profile:
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
144
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Derf Needle Holder
Tip Profile:
12 cm (5 in.) long
Standard 501246 . . . . . . . .
German 501246-G . . . . . . US$47
22
US$
MICRODISSECTION
1:1
Tip Profile:
1:1
Ryder Needle Holder
13 cm (5 in.) long
serrated Tungsten Carbide jaws
Standard 500226 . . . . .
German Crile-Wood Needle Holder
500226-G .
60
US$
175
US$
Tip Profile:
14.5 cm (5.75 in.) long serrated Tungsten Carbide jaws
Standard 500224 . . . . .
German 500224-G . US$118
1:1
MICROSURGERY
1:1
66
US$
Can be used
ambidextrously!
Tip Profile:
Mathieu Fine Needle Holder
14 cm (5.5 in.) long
serrated Tungsten Carbide jaws
Standard
500225 . . . . .
German 500225-G . .
82
US$
155
US$
Needle Holder, Round handled
14 cm (5.5 in.) long
round Hollow handles
straight smooth jaws
14207 . . . . . . . . . US$161
Tip Profile:
1:1
Needle Holder, Round handled
14 cm (5.5 in.) long
round Hollow handles
urved smooth jaws
14206 . . . . . . . . . US$161
Tip Profile:
1:1
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
145
Castro Olsen-Hegar Needle Holder
15 cm (6 in.) long
combined with Suture Scissors
serrated jaws
MICROSURGERY
501998 . . . . . US$126
Micro Olsen-Hegar Needle Holder
12 cm (4.75 in.) long
combined with Suture Scissors
serrated jaws
jaw length 10 mm
tip width 2 mm
501989 . . . . . . US$76
Tip Profile:
Olsen-Hegar Needle holder with Suture Scissors,
MICRODISSECTION
serrated Tungsten Carbide jaws
14 cm (5.5 in.) long
Standard
German 500227 . . . . . . . . US$71
500227-G . . . . US$126
12 cm (4.75 in.) long
Standard
501312 . . . . . US$112
16.5 cm (6.5 in.) long
Standard
German
Tip Profile:
501725 . . . . . . US$98
501725-G . . . US$168
1:1
1:1
Olsen-Hegar Needle Holder
Tip Profile:
14cm (5.5 in.) long
combined with Suture Scissors
serrated jaws
500023 . . . . . . US$41
500023-G . . . US$70
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
146
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Needles
00
0
0
1
1
2
2
3
3
4
4
5
5
6
6
Taper point needles
pierce and spread
tissue without cutting it.
They are ideal for suturing
delicate, soft tissue when minimal trauma is desired.
7
8
8
9
Surgical Needles, cutting edge, 3/8 circle
501802
501803
501804
501805
501806
501807
501808
501809
501810
501935
Cutting edge needles have sharp
edges that penetrate easily
through tough tissue. They
are ideal for suturing
skin and dense
dermal tissue.
7
Size
Size
Size
Size
Size
Size
Size
Size
Size
Size
00, 18mm, pack of 12
0, 21mm, pack of 12
1, 24mm, pack of 12
2, 28mm, pack of 12
3, 32mm, pack of 12
4, 36mm, pack of 12
5, 40mm, pack of 12
6, 45mm, pack of 12
7, 50mm, pack of 12
8, 55mm, pack of 12
10
24
24
US$
24
US$
24
US$
24
US$
24
US$
24
US$
24
US$
24
US$
24
US$
US$
0
501936
501937
501938
501939
501940
501941
501942
501943
501944
501945
501946
Size
Size
Size
Size
Size
Size
Size
Size
Size
Size
Size
2
00
3
0
4
1
0
0
1
1
4
7
Size
Size
Size
Size
Size
00, 11mm, pack of 12
0, 13mm, pack of 12
1, 15mm, pack of 12
2, 18mm, pack of 12
3, 21mm, pack of 12
00, 11mm, pack of 12
0, 13mm, pack of 12
1, 15mm, pack of 12
2, 18mm, pack of 12
3, 21mm, pack of 12
7
10
24
US$
24
US$
24
US$
24
US$
24
8
US$
Eye Needles, taper point, 5/16 circle
(above right)
Size
Size
Size
Size
Size
6
9
Eye Needles, cutting edge, 5/16 circle
(above left)
501962
501963
501964
501965
501966
5
8
3
3
501957
501958
501959
501960
501961
3
6
2
2
US$
2
5
00
24
24
US$
24
US$
24
US$
24
US$
24
US$
24
US$
24
US$
24
US$
24
US$
24
US$
1
15mm
00
0, 15mm, pack of 12
1, 18mm, pack of 12
2, 21mm, pack of 12
3, 24mm, pack of 12
4, 28mm, pack of 12
5, 32mm, pack of 12
6, 36mm, pack of 12
7, 40mm, pack of 12
8, 45mm, pack of 12
9, 50mm, pack of 12
10, 55mm, pack of 12
24
24
US$
24
US$
24
US$
24
US$
US$
Surgical Needles, cutting edge, 1/2 circle
Surgical Needles, taper point, 3/8 circle
501791
501792
501793
501794
501795
501796
501797
501798
501799
501800
501801
Size
Size
Size
Size
Size
Size
Size
Size
Size
Size
Size
0, 15mm, pack of 12
1, 18mm, pack of 12
2, 21mm, pack of 12
3, 24mm, pack of 12
4, 28mm, pack of 12
5, 32mm, pack of 12
6, 36mm, pack of 12
7, 40mm, pack of 12
8, 45mm, pack of 12
9, 50mm, pack of 12
10, 55mm, pack of 12
24
US$
24
US$
24
US$
24
US$
24
US$
24
US$
24
US$
24
US$
24
US$
24
US$
24
US$
501947
501948
501949
501950
501951
501952
501953
501954
501955
501956
Size
Size
Size
Size
Size
Size
Size
Size
Size
Size
00, 18mm, pack of 12
0, 21mm, pack of 12
1, 24mm, pack of 12
2, 28mm, pack of 12
3, 32mm, pack of 12
4, 36mm, pack of 12
5, 40mm, pack of 12
6, 45mm, pack of 12
7, 50mm, pack of 12
8, 55mm, pack of 12
24
24
US$
24
US$
24
US$
24
US$
24
US$
24
US$
24
US$
24
US$
24
US$
US$
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
147
MICROSURGERY
Needle measurements
taken across needle
from eye to tip:
Surgical Needles, taper point, 1/2 circle
MICRODISSECTION
All needles have a Spring Eye
which allows the suture to be
pressed into the eye instead of
threaded.
MICROSURGERY
MICRODISSECTION
Staple Remover
12 cm (4.5 in.) long, for use with disposable skin stapler
501830. . . . . . US$107
Reflex Clip Applier
Reflex Clip Applier
11 cm (4.3 in.) long
for 7 mm clips only
500343 . . . . US$328
11 cm (4.3 in.) long
for 9 mm clips only
500345 . . . . US$328
Reflex Clip 7 mm
Reflex Clip 9 mm
for use with #500343
100/box, Stainless Steel, non-sterile
500344 . . . . . US$67
for use with #500345
100/box, Stainless Steel, non-sterile
500346 . . . . . US$67
Reflex clip removing forceps
12 cm (4.75 in.) long, for 7 mm and 9
mm clips
500347 . . . . . . . . US$180
Applying Forceps for Silver Clips #500087, 18 cm (7 in.) long
Standard 500088 . . . . . US$49
German 500088-G . US$180
Silver Clips, Micro Vascular
0.5 x 0.8 mm (100/pkg)
500087 . . . . . .
29
US$
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
148
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Clips and Clamps
Schwartz Vessel Clips
Micro Vessel Clips, serrated jaws
German
straight, 0.75 x 4 mm jaws
straight, 0.8 x 6 mm jaws
straight, 1 x 8 mm jaws
straight, 1.5 x 10 mm jaws
MICRODISSECTION
501779-G
501780-G
501781-G
501782-G
71
71
US$
71
US$
71
US$
US$
German
501786-G
straight, 1.7 x 8 mm jaws
US$
501787-G
slightly angled, 1.7 x 8 mm jaws
US$
28
501788-G
strong angle, 1.7 x 8 mm jaws
US$
28
28
Side and front view illustrations of straight micro vessel clips
501783-G
501784-G
501785-G
slightly curved, 85g pressure, jaws 1mm wide x 6 mm long . US$85
fully curved, 85g pressure, jaws 1mm wide x 6 mm long. . . . US$85
45° angle, 85g pressure, jaws 1mm wide x 6 mm long. . . . . US$85
Vessel Clips
10 g pressure, jaws 0.5mm wide x 0.6mm long, 5 per pack. . . . US$64
14120
30 g pressure, jaws 1mm wide x 5mm long, 5 per pack . . . . . . . US$64
14121
60 g pressure, jaws 1mm wide x 8mm long, 5 per pack . . . . . . . US$64
Micro Vessel Clip Applier with lock
Applying forceps for Micro Vessel Clips 501783-G, 501784-G, and
501875-G (above).
180
503200 14.5 cm long
US$
Applying Forceps
Approximator
20 g pressure,
for 0.5 to 1.0 mm vessel
14084. . . . . . . . . . .
37
US$
Applying Forceps for Approximator #14084 & Vessel Clips
#14120, #15911, and #14121, 10 cm (4 in.) long
US$
34
14189
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
149
MICROSURGERY
15911
Bulldog Clamps
MICRODISSECTION
MICROSURGERY
Micro Bulldog Clamp, curved 8 x 1.2 mm
serrated jaws, 3 cm (1 in.) long
Standard 14119 . . . . . . .
US$
German US$
14119-G . . . . .
32
55
Small Bulldog Clamp, straight serrated jaws,
6 cm (2.3 in.) long
Standard
14118 . . . . . . .
US$
German 14118-G . . . . .
US$
26
42
Johns Hopkins Bulldog Clamp, curved serrated
jaws, 6.5 cm (2.5 in.) long
Standard 14117 . . . . . . .
US$
German US$
14117-G . . . . .
26
47
Johns Hopkins Bulldog Clamp, 6.5 cm
(2.5 in.) long, straight serrated jaws
Standard
14116 . . . . . . .
US$
German 14116-G . . . . .
US$
26
47
Frog Heart Clips
Glover Bulldog Clamps
501902.... US$59
two flat loops
2.5 mm diameter loops
24 mm long
5 per package
501903.... US$38
two fine loops
0.6 mm diameter tips
17 mm long
5 per package
503236 Glover Bulldog Clamp - straight, smooth tips - 8 cm
US$
long with tension adjustment
56
503238 Glover Bulldog Clamp - straight, smooth tips - 7 cm
US$
long with tension adjustment
54
501904.... US$59
two flat tips
1 x 3 mm tips
18 mm long
5 per package
503237 Glover Bulldog Clamp - curved, smooth tips - 8 cm
US$
56
long with tension adjustment 503239 Glover Bulldog Clamp - curved, smooth tips - 7 cm
US$
long with tension adjustment 56
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
150
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Retractors
KD Mouse/Rat Eye Speculum
Wire Retractors
Extra Small, 1cm long, 2mm blades, 1.75mm wide
Small, 2.1cm long, 2.2mm blades, 5mm max. spread
Medium, 2.1cm long, 3.2mm blades, 6mm max. spread
Large, 2.1cm long, 4mm blades, 1cm max. spread
30
28
US$
28
US$
28
US$
US$
1:1
extra small
small
medium
large
Wire Retractors
Wire Retractors
5 cm (2 in.) long,
15 x 10 mm wire blades
7 mm depth
maximum spread 25 mm
Standard
500368 . . . . . . .
German 500368-G . . . .
4 cm (1.6 in.) long
13 x 5 mm wire blades
7 mm depth
maximum spread 15 mm
501994 . . . . . . US$29
28
55
US$
US$
1:1
Wire Retractors
5 cm (2 in.) long
10 x 5 mm blades
5 mm depth
maximum spread 13 mm
Standard 14130 . . . . . . US$17
German 14130-G . . . US$25
Barraquer Retractor
4 cm (1.5 in.) long,
10 x 4 mm wire blades
7 mm depth
maximum spread 3 cm
Standard
500369 . . . US$28
German 500369-G US$40
1:1
Picture is smaller than actual size
Wire Retractors - non-magnetic
4.5 cm (1.8in.) long
0.8 x 1.5 mm wire blades
maximum spread 35 mm
503210 . . . . . . US$29
Wire Speculum
Titanium
Length:
4.5 cm (1.75 in.)
Blades:
13.5 mm blades
Maximum spread: 20 mm
1:1
555801L . . . . . US$34
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
151
MICROSURGERY
1:1
MICRODISSECTION
503363
501897
501898
501899
4 cm (1.6 in.) long
5 x 5 mm wire blades
5 mm depth
maximum spread 15 mm
501993 . . . . . . US$29
MICROSURGERY
Self-retaining Retractor
Length: 5 cm (2 in.)
Blades: 2.5 cm
Maximum spread: 4.5 cm
Small, self-retaining retractor perfect for small animal
surgery and dissection.
503209 . . . . . . . . . . . . . .
95
Goldstein Retractor
Small, self-retaining retractor perfect for small animal
surgery and dissection.
501967 . . . . . . . . . . . . . .
Agricola Retractor
Length: 4 cm (1.6 in.)
Blades: 3 x 3 sharp prongs
Small, self-retaining retractor perfect for small animal
surgery and dissection.
Length: 2 cm (0.78 in.)
Blades: 3 x 3 sharp prongs
Maximum Spread: 1.0cm
142
US$
501846 . . . . . . . . . . . . . . .
96
US$
Length: 3 cm (1.18 in.)
Blades: 3 x 3 sharp prongs
Maximum Spread: 1.8cm
501968 . . . . . . . . . . . . . .
MICRODISSECTION
US$
126
US$
1:1
Length: 4 cm (1.57 in.)
Blades: 3 x 3 sharp prongs
Maximum Spread: 3.5cm
501969 . . . . . . . . . . . . . .
126
US$
Stevenson Retractor, 8 cm (3 in.) long, 3x3
ALM Self-retaining Retractor, 7 cm (2.75 in.)
prongs, 3 mm deep
Standard 14131 . . . . . . US$71
German 14131-G . . . US$106
long, 4x4 prongs
Standard 14240. . . . . . . . . . US$42
14240-G. . . . . . . US$95
German 1:1
1:1
Maximum spread 15 mm
Maximum spread 55 mm
Knapp Speculum, 15 x 6 mm
Modified ALM Self-retaining Retractor
7 cm (2.75 in.) long, 2x2 prongs
Smaller, thinner prongs for use on mouse/rat eyelids
501844. . . . . . . US$41
blades, 8.3 cm (3.25 in.) long,
maximum spread 25 mm
Standard 14129 . . . . . . . US$53
German
14129-G . . . US$143
1:1
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
152
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
MICRODISSECTION
Jansen retractor
4.5 in. long, maximum spread 3cm
3 x 3 prongs, blunt
501770 . . . . US$67
Standard German
501770-G . US$114
sharp prongs
Standard
501859 . . . . US$67
Weitlaner Retractor, self-retaining
Standard
German
501328-G . . . . .
501328 . . . . . . . . . . . . . . . US$116
4”, 2x3 prongs, blunt, maximum spread 3cm
215
US$
501314-G . . . . .
501314 . . . . . . . . . . . . . . . US$114
4”, 2x3 prongs, sharp, maximum spread 4cm
US$
224
501722 . . . . . . . . . . . . . . . US$126
501722-G . . . . .
5.5”, 3x4 prongs, blunt, maximum spread 4.5cm
US$
501721-G . . . . .
501721 . . . . . . . . . . . . . . . US$126
5.5”, 3x4 prongs, sharp, maximum spread 4cm
US$
501724 . . . . . . . . . . . . . . . US$144
501724-G . . . . .
6.5”, 3x4 prongs, blunt, maximum spread 6.5cm
US$
501723-G . . . . .
501723 . . . . . . . . . . . . . . . US$144
6.5”, 3x4 prongs, sharp, maximum spread 7cm
US$
180
1:1
216
180
Gelpi Retractor
Standard
3.5”
501329 . . . . . . 4.5”
501719 . . . . . . US$102
5.5”
501720 . . . . . US$114
German
95
US$
1:1
501720-G . . . . . US$239
Senn Retractor
7-in. long
Standard
sharp
501327 . . . . . US$34
blunt
501718 . . . . . US$32
German
501327-G . . . . . . US$88
501718-G . . . . . . US$88
1:1
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
153
MICROSURGERY
180
Sapphire Knife
Clear blade increases view of tissue
Chemically inert to lymph, blood, and disinfectant solutions
60°
500313
500316
Crescent Blade
front & side view
90°
501736
Phaco Blade
front & side view
501761
501762
Custom sizes available
— call for details
500317
501811
Stainless Handle for Sapphire Knife, 13 cm long, retractable Titanium Handle for Sapphire Knife, 13 cm long, retractable
Single Edge Blades for use with above handles 500317 & 501811
501760
Sapphire Blade, single edge, 1 mm wide, 0.22mm thick, 15° 500313
Sapphire Blade, single edge, 1 mm wide, 0.2mm thick, 30° 501304
Sapphire Blade, single edge, 1 mm wide, 0.23mm thick, 45° 501735
Sapphire Blade, single edge, 1 mm wide, 0.21mm thick, 60°
501736
Sapphire Blade, single edge, 1 mm wide, 0.3mm thick, 90°
500315
Sapphire Blade, single edge, 2 mm wide, 0.21mm thick, 30° 500325
Sapphire Blade, single edge, 1.4 mm wide, 0.3mm thick, 35° Double Edge Blades for use with above handles 500317 & 501811
500314
Sapphire Blade, double edge lance, 1 mm wide, 0.3mm thick, 35°
500316
Sapphire Blade, double edge lance, 2 mm wide, 0.3mm thick, 60° 500326
Sapphire Blade, double edge lance, 1.7 mm wide, 0.3mm thick, 60°
Specialty Handle and Blades
501763
Stainless Angled Handle for Sapphire Knife, 13 cm long, retractable
501812
Titanium Angled Handle for Sapphire Knife, 13 cm long, retractable
501761
Crescent Sapphire Blade, 2.8 mm wide, 0.3mm, (fits handles 501763 & 501812)
501762
Phaco Sapphire Blade, 2.7/3.4 mm wide, 0.3mm, (fits handles 501763 & 501812)
501763 (blade sold separately)
30°
500317 (blade sold separately)
MICRODISSECTION
MICROSURGERY
Single crystal sapphire (Al2O3), while not as hard as diamond, is still hundreds of times
harder than steel razor blades. The durability of the blade guarantees a unique operational
life that exceeds one hundred incisions In addition, the blade and handle can be sterilized
using any currently known procedure.
The super sharp cutting edge, mirror surface finish, and low friction coefficient combine
to create an accurate, clean cut with minimal tissue trauma. Scarring is thus reduced and
incisions heal quickly.
Both the stainless steel and titanium handles feature safety
locks to protect the super sharp cutting edge from damage
and
prevent injuries to medical personnel.
59
144
US$
US$
47
47
US$
47
US$
47
US$
47
US$
78
US$
78
US$
Sapphire Knife Protection Tray
US$
65
126
US$
143
US$
US$
59
144
US$
198
US$
210
US$
US$
Protect your sapphire knife with a sterilization/
protection tray. Fully autoclavable tray safely holds
two sapphire knife handles for sterilization and
storage.
501729
Sterilization/Protection Tray
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
154
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
36
US$
Scalpels, Knives, Blades and Handles
Scalpel Handle #3
13 cm (5 in.) long, stainless steel
US$
German US$
10
500236-G . . . .
26
For Blades #10 ~ #15
Scalpel Handle #4
14 cm (5.5 in.) long, stainless steel
Standard
500237 . . . . . . .
US$
German 500237-G . . . . .
US$
10
26
For Blades #20 ~ #25
Scalpel Handle #7
16 cm (6.25 in.)
long, stainless steel
500238 . . . . US$13
Standard
German 500238-G US$43
For Blades #10 ~ #15
Sterile stainless steel blades
21
10
11
12
23
15
24
20
500239
500240
500241
500242
500243
500244
500245
500246
500247
500248
Scalpel Blades #10, stainless steel, sterile (100 / box) US$43
Scalpel Blades #11, stainless steel, sterile (100 / box) US$43
Scalpel Blades #12, stainless steel, sterile (100 / box) US$43
Scalpel Blades #15, stainless steel, sterile (100 / box) US$43
Scalpel Blades #20, stainless steel, sterile (100 / box) US$46
Scalpel Blades #21, stainless steel, sterile (100 / box) US$46
Scalpel Blades #22, stainless steel, sterile (100 / box) US$46
Scalpel Blades #23, stainless steel, sterile (100 / box) US$46
Scalpel Blades #24, stainless steel, sterile (100 / box) US$46
Scalpel Blades #25, stainless steel, sterile (100 / box) US$46
25
Blade Safe surgical blade remover
will remove blades easily and safely from any
style surgical blade handle
501335 . . . . . .
26
US$
1:1
Round Knurled Blade Handle, stainless steel, 10 cm long
501249
Needle Blades, 6/pk, 4.5 cm . . . . . . . . . . . . . . . . . . US$108
501250
Miniature Edged Blades, curved tip, 12/pk, 3.5 cm .
501251
Miniature Edged Blades, round tip, 12/pk, 3.5 cm . US$23
19
US$
Standard
German 501247 . . . . .
501247-G . .
37
60
US$
US$
Hex Blade Handle, stainless steel, 10 cm long
Standard
German 501248 . . . . . . US$37
501248-G . . US$60
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
155
MICROSURGERY
22
All stainless steel scalpel blades are made by Feather®, using a precise
beveling technique to create the edge’s micron sharpness. They are the
finest blades available.
MICRODISSECTION
Standard 500236 . . . . . . .
Disposable Safety Scalpels
MICROSURGERY
Retractable blade protects from accidental
injury. Complies with the OSHA Directive.
501337
501338
501339
Size #10, pack of 10 . . . . US$43
Size #11, pack of 10 . . . . US$43
Size #15, pack of 10 . . . . US$43
500348
Disposable Scalpel, No. 10, sterile, (10/box)
US$
500349
Disposable Scalpel, No. 11, sterile, (10/box)
US$
12
500350
Disposable Scalpel, No. 12, sterile, (10/box)
US$
500351
Disposable Scalpel, No. 15, sterile, (10/box)
US$
500352
Disposable Scalpel, No. 20, sterile, (10/box)
US$
500353
Disposable Scalpel, No. 21, sterile, (10/box)
US$
500354
Disposable Scalpel, No. 22, sterile, (10/box)
US$
500355
Disposable Scalpel, No. 23, sterile, (10/box)
US$
500356
Disposable Scalpel, No. 24, sterile, (10/box)
US$
12
12
12
12
12
12
12
12
MICRODISSECTION
Microsurgical Knives
Sterile, disposable
501731
Microsurgical Knife, 15° 3 mm blade, 13.5 cm (5.25 in.) long (package of 6)
500249
US$
83
Microsurgical Knife, 15° 5 mm blade, 13.5 cm (5.25 in.) long (package of 6)
500250
Roundstock Ophthalmic Knife, 15° 5.7 mm blade, 13.5 cm (5.25 in.) long (package of 6)
83
US$
101
US$
Micro Dissecting Knife
13 cm long, 1 mm blade, right angle
14135 . . . . US$54
Razor Blade Holder
1:1
Tip Profile:
12.5 cm (5 in.) long
round tips
S-shape jaws
1:1
14139 . . . . . . . . . US$116
Special jaw shape prevents blades from slipping
Razor Blade Holder
Tip Profile:
12 cm (4.75 in.) long
round tips
convex/concave jaws
1:1
Standard 14134 . . . . . .
German 14134-G . . .
92
US$
302
US$
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
156
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Ear Punches and Ear Tags
MICRODISSECTION
Ear Tag Applicator
Not actual size.
503292 . . . . . . . . . .
501866
Ear Tags, pack of 100, sequence 000-099
US$
501867
Ear Tags, pack of 100, sequence 100-199
US$
501868
Ear Tags, pack of 100, sequence 200-299
US$
501869
Ear Tags, pack of 100, sequence 300-399
US$
501870
Ear Tags, pack of 100, sequence 400-499
US$
501871
Ear Tags, pack of 100, sequence 500-599
US$
501872
Ear Tags, pack of 100, sequence 600-699
US$
501873
Ear Tags, pack of 100, sequence 700-799
US$
501874
Ear Tags, pack of 100, sequence 800-899
US$
501875
Ear Tags, pack of 100, sequence 900-999
US$
501893
Ear Tags, pack of 1000, sequence 000-999
90
36
1:1
36
36
36
36
Ear Punch
36
10 cm (4 in.) long
2 mm diameter
1 mm diameter
36
36
500077 . . . .
500076 . . . .
58
58
US$
US$
36
36
299
US$
Ear Punch
1:1
5 cm (2 in.) long, 2 mm diameter
500075 . . . . . . US$28
MICROSURGERY
Rongeurs, Cutters, and Punches
503253 Bone cutter, strong serrated tips, straight, 10.5cm . . . . . US$31
503254 Bone cutter, strong tips, curved, 10.5cm . . . . US$29
503255
Bone cutter, strong serrated tips,
curved, 10.5cm
US$
31
1:1
503252
Bone cutter, strong tips,
straight, 10.5cm
US$
29
Rongeur, Micro Friedman
15 cm (5.9 in.) long Jaw Width
Tip Profile:
Standard
1.3mm
0.8 mm
1.0 mm
14292 . . . . . . US$89
501332 . . . . . . US$91
501333 . . . . . . US$91
German
14292-G . . . .
211
US$
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
157
Tip Profile:
MICRODISSECTION
MICROSURGERY
Mini Blumenthal Rongeur
11 cm (4.3 in.) long
jaw width 2 mm
Standard
German 1:1
14090 . . . . . . US$89
14090-G . . US$150
Friedman Rongeur
1:1
Tip Profile:
Blumenthal Rongeur
Tip Profile:
15 cm (6 in.) long
jaw width 3 mm
Standard 14091 . . . . . . US$76
German 14091-G . . US$157
Single Blade Bone Cutter
14 cm (5.5 in.) long
jaw length 23 mm
blade tip width 1 mm
block tip width 2 mm
501990 . . . . . . US$86
13 cm (5 in.) long
jaw width 2.5 mm
14089 . . . . . US$79
Standard German 14089-G . . . US$148
15 cm long (6 in.)
Standard 503295 . . . . US$78
1:1
1:1
Cutting Block
Cutting Blade
The Corneoscleral punch is excellent for removing the skull
of a small animal without damaging the brain or spinal
cord. The lower jaw of the punch is a flat plate which can be
inserted into the skull with much less damage to the brain
than a ronguer.
500079
500143
Corneoscleral Punch , 8 cm (3 in.) long, 2 mm wide
Corneoscleral Punch, 8 cm (3 in.) long, 1.5 mm wide
91
91
1:1
US$
US$
Tip Profile:
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
158
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Tip Profile:
Bone Cutter
MICRODISSECTION
one serrated blade, 11 cm (4.3 in.) long,
9 mm blades
501269 . . . . . . US$94
1:1
Tip Profile:
1:1
Cuticle nipper
11 cm (4.3 in.) long, angle, ring handles
Standard German 500137 . . . . . . . .
500137-G . . . . . .
30
98
US$
US$
Nail nippers
MICROSURGERY
14 cm (5.5 in.) long, concave jaws,
double spring
Standard 500362 . . . . . US$22
500362-G . US$101
German Tip Profile:
1:1
Titanium Wire Cutter
15 cm (6 in.) long, 15 mm Tungsten Carbide
blades, light weight (60g)
500450 . . . . . . . . US$288
Tip Profile:
never
rusts!
Applications
● MRI
● Marine biology
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
159
Liston Bone Cutting Forceps
MICROSURGERY
19 cm (7.5 in.) long, straight 500358 . . . . . US$66
14 cm long, straight 500462 . . . . . US$58
Tip Profile:
Hooks and Probes
Tungsten Dissection Probes
● Used for separating cells ● Made of pure tungsten, a hard and biocompatible metal
MICRODISSECTION
● Less than one micron in diameter ● Much stronger and more durable than glass probes
● All probes are 50 mm long (10 pieces per package)
Tip Profile A
Tip Profile A
500133 Tungsten Dissecting Probe, 0.125mm diameter rod 500134 Tungsten Dissecting Probe, 0.25mm diameter rod 500135 Tungsten Dissecting Probe, 0.5mm diameter rod Tip Profile B
86
86
US$
86
US$
US$
Tip Profile B
501316 Tungsten Dissecting Probe, 0.125mm diameter rod 501317 Tungsten Dissecting Probe, 0.25mm diameter rod 501318 Tungsten Dissecting Probe, 0.5mm diameter rod 86
86
US$
86
US$
US$
Handle for Probe, stainless steel
11 cm (4.3 in.) long
500448 . . . . . US$53
7 cm (2.75 in.) long
501301 . . . . . US$54
1:1
Probe
Stainless steel, 14cm (5.5 in.),
1.0 mm diameter
501313. . . . . . . . . .
10
US$
Illustration - not shown actual size
Dura Hook
Sharp, 15 cm
503322. . . . . . . . . . . US$72
1:1
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
160
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
500458 Straight Dissecting Needles, 14 cm (5.5 in.) long, 12/box
US$
500460 Curved Dissecting Needles, 14 cm (5.5 in.) long, 12/box
US$
14
Meyhoefer Curette
14cm (5.5 in.), 1.5mm diameter
Standard 501773 . . . . . . .
German 501773-G . . .
35
US$
1:1
157
US$
Tyrell Hook, sharp, 13 cm (5 in.) long
Standard German 14136 . . . . . . . . . . US$34
14136-G . . . . . . . US$53
1:1
MICRODISSECTION
14
Wecker Spatula
14cm (5.5 in.), 3mm wide blade
Standard 501772 . . . . . . . . . US$35
501772-G . . . . . US$161
German (German-made spatula is 2mm wide)
1:1
MICROSURGERY
Dura Dissector
20 cm
503336. . . . . . . . . . . US$44
Not shown actual size
Brain Spatula
22 cm
503338. . . . . . . . . . .
12
US$
Not shown actual size
Castroviejo Caliper
75 mm (3 in.) long
20 mm scale
501200 . . . . . US$144
Vascular Measuring Ruler
503211 . . . . . US$173
1:1
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
161
SuperCut Tenotomy Scissors curved (#14396)
Rongeur 3mm jaw (#14091)
Utility Scissors (#501322)
Operating Scissors straight Sharp/Blunt (#14192)
Dumont Tweezer #5 (#14098)
Flat Jaw Tweezers (#501303)
Probe 1.0 mm diameter, blunt (#501313)
Order Number:KIT-PHYSIO-I
150
US$
239 Value
US$
Add the Stainless Steel Protection
Case to any kit (#14213)
for an additional US$50
MICRODISSECTION
MICROSURGERY
Physiology Kit I
US$
336
506 Value
US$
Physiology Kit II
Vannas Scissors (#14003)
SuperCut Iris Scissors straight (#14218)
Rongeur 1.3mm jaw (#14292)
Utility Scissors (#501322)
Operating Scissors straight Sharp/Blunt (#14192)
Dumont Tweezer #5 (#14098))
Probe 1.0 mm diameter, blunt (#501313)
Stevenson Retractor (#14131)
Iris Forceps curved (#15915)
Adson Forceps 1x2 teeth (#500092)
Olsen-Hegar Needle holder (#500227)
Order Number:PHYSIO-II
s
lude
c
n
i
Now ent
m
intru
r
folde
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
162
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Mouse Kit
MICRODISSECTION
Dumont #5 (#14098)
Vannas Scissors (#14003)
Iris Forceps, curved, serrated (#15915)
Dissecting Scissors, straight 10cm (#14393)
Wire Retractor (#14130)
Needle Holder (#14109)
Blunt Probe, 1.0 mm diameter (#501313)
Order Number: MOUSEKIT
Now includes
storage case!
179
US$
268 Value
US$
MICROSURGERY
Rat Kit
203
US$
293 Value
US$
Dumont #5 (#14098)
Vannas Scissors (#14124)
Iris Forceps, serrated (#15915)
SuperCut Iris Scissors, straight 10cm (#14218)
Alm Retractor (#14240)
Needle Holder (#14110)
Blunt Probe, 1.0 mm diameter (#501313)
Order Number: RATKIT
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
163
Mouse Vessel Cannulation Kit
MICRODISSECTION
MICROSURGERY
Kit includes:
Vessel Cannulation Forceps
Vannas Scissors
Fine Serrated Forceps
Dumont #5 Tweezers
Alm Retractor
MicroFil 28 ga.
Vessel Cannulation Forceps
0.5mm diameter
Order Number
501895
275
US$
360 value
US$
Micro Cannula
l 0.4mm O.D., 0.2mm I.D. tubing
l Autoclavable
l Biocompatible Perfluorocarbon tubing material
KZ1101
Micro Cannula, 3"
96
US$
This micro cannula is ideal for placement in
the carotid or femoral artery of mice, rats,
and other small animal blood vessels. It can
be used with a pressure transducer (WPI’S
BLPR2) for blood pressure measurement, or in
conjunction with a micro-syringe injection system
(like WPI’s UMPIII or MMP pumps). The incorporated
standard female luer fitting makes connecting to existing
experimental plumbing quick and easy. The cannula is provided
with a contoured-tip stainless steel stylet (trocar) to facilitate placement using established techniques. A movable “shoulder” ring provides
a tie-in point to prevent accidental removal. The cannula may be left in
place for two hours or more, and with proper care and cleaning, may be reused multiple times. Instructions for use included.
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
164
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
MICRODISSECTION
TurtleSkin®
FullCoverage
Entire Hand Protection —
Fingertip to Forearm
While no glove is puncture or cut proof, TurtleSkin FullCoverage gloves give you puncture and
cut protection covering the entire hand. Surprisingly soft and comfortable, these gloves offer
over 35 ounces of needle protection.
501888
501889
501890
501891
TurtleSkin® Gloves, small, pair
TurtleSkin® Gloves, medium, pair
TurtleSkin® Gloves, large, pair
TurtleSkin® Gloves, extra large, pair
95
95
US$
95
US$
95
US$
US$
TurtleSkin is a registered trademark of Warwick Mills, Inc.
● Large, stable base
● Hardened blades for
long service
● Ambidextrous
configuration
DCAP
DCAP-M
DCAP-L
Guillotine for Rodents and other small animals
US$
(opening 1.5 x 1.5 in.)
594
Guillotine for large rodents and other medium animals
US$
(opening 2.5 x 2.5 in.)
990
US$
Guillotine for larger animals (opening 4” x 4”)
1,434
The small animal guillotine has been completely
redesigned for ease of use and extra added
safety features. The blades are drawn together by
magnetic force to ensure a clean and precise cut
through very strong bones and skin.
There is a large base for stability, long handle for
extra leverage, spring action so the blades can not
fall down unexpectedly, hardened stainless blades
for endurance, simplified construction for easy
maintenance. The fluoropolymer coated surface
on the base makes cleaning easy.
The guillotine is considered one of the most humane methods to
dispense with a subject.
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
165
MICROSURGERY
Rodent
Guillotine
Disposable Biopsy Punches, package of 50
MICRODISSECTION
MICROSURGERY
Individually packaged in color-coded, transparent, sturdy blister pack to
protect cutting edge
Seamless stainless steel razor sharp cutting edge
Ribbed handle provides maximum control and comfort
501816 1.5mm diameter
501817 2.0mm diameter
501818 3.0mm diameter
155
155
US$
155
US$
US$
1:1
Uni-Core Punches
Cuts, retrieves, and stores, cored samples in one operation
The Harris Uni-Core punch consists of a razor sharp stainless steel cutting
tip designed to cut, retrieve and store cored samples from source materials
such as paper, gels, cloth, leaves, paint chips, films, tissue or other thin or soft
substrates. The tip is protected by a removable cover cap. The body is made
from polypropylene plastic. Each Harris Uni-Core is individually pouched and
ethylene oxide sterilized.
501905
501906
501907
501908
501909
501910
501911
501912
0.50mm ID, 1.0mm OD
0.75mm ID, 1.25mm OD
1.25mm ID, 1.75mm OD
2.0mm ID, 2.5mm OD
5.0mm ID, 5.5mm OD
6.0mm ID, 6.5mm OD
7.0mm ID, 7.5mm OD
8.0mm ID, 8.5mm OD
18
18
US$
18
US$
18
US$
18
US$
18
US$
18
US$
18
US$
US$
Achieve hemostasis of bone by applying a
small amount of sterile bone wax. The wax is a
combination of beeswax, isopropyl palmitate, and
mineral oil which stops bleeding at the site.
501771 Bone Wax, sterile, 3g
30
US$
Rodent Brain Matrices
l Large species selection
l From mouse to rat
l Repeatable sections to 1 mm
l Can be chilled and sterilized
l Available in acrylic or stainless steel
WPI offers one of the largest selections
of brain matrices available. Made
of acrylic, or stainless steel, these
matrices are sturdy and can be heated,
chilled, autoclaved (stainless steel only), scrubbed
— and stand up to rigorous daily use. Coronal matrices
have the additional feature of a mid-line sagittal cut to facilitate
splitting of the left and right hemispheres. Sections can be as fine as
1‑mm. The olfactory/spinal/notch is cut into each matrix.
RBMA-200C
RBMA-200S
RBMA-300C
RBMA-300S
RBMA-600C
RBMA-600S
RBMS-200C
RBMS-200S
RBMS-300C
RBMS-300S
RBMS-600C
RBMS-600S
BLADES
Adult mouse, coronal slices, acrylic
Adult mouse, sagittal slices, acrylic
Rat, 175-300g, coronal slices, acrylic
Rat, 175-300g, sagittal slices, acrylic
Rat, 300g-600g, coronal slices, acrylic
Rat, 300g-600g, sagittal slices, acrylic
Adult mouse, coronal slices, stainless steel
Adult mouse, sagittal slices, stainless steel
Rat, 175-300g, coronal slices, stainless steel
Rat, 175-300g, sagittal slices, stainless steel
Rat, 300g-600g, coronal slices, stainless steel
Rat, 300g-600g, sagittal slices, stainless steel
Single-Edge Blades (pkg of 100)
204
204
US$
228
US$
228
US$
228
US$
228
US$
702
US$
702
US$
702
US$
702
US$
702
US$
702
US$
48
US$
US$
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
166
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
500370 — 2.5x Binocular Loupe
● High quality coated optics
● Adjustable independent focus for each eye
● Adjustable interpupillary distance
Gain control — see clearly and
accurately
Unlimited uses, from surgical
procedures to microcircuitry
assembly
● Mounted on spectacle frames
Priced so that everyone in the
lab can have one!
MICROSURGERY
501331 — 4x Binocular Loupe
BINONULAR LOUPES
PART #
PRISM
POWER
WORKING
DISTANCE
PRICE
500370
2.5x
501331
4.0x
34 cm
US$
503640
2.5x
50 cm
US$
503641
3.0x
34 cm
US$
503642
3.0x
50 cm
US$
503643
3.5x
34 cm
US$
503644
3.5x
50 cm
US$
503645
✔
35~50 cm
420
US$
714
431
438
443
450
630
✔
3.5x
34 cm
503646
✔
3.5x
50 cm
US$
503622
✔
4.0x
50 cm
US$
503623
✔
4.5x
34 cm
US$
✔
4.5x
50 cm
US$
503624
Protective velvetlined wood case
included!
455
US$
642
719
750
762
MICRODISSECTION
Fantastic
Magnifying
Glasses!
Veterinary surgeons find WPI’s binocular
loupes useful for surgery on Koi fish at the
International Conference on Exotics wet lab
in Key West, Florida.
Photo by Marc Kramer, DVM
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
167
MICRODISSECTION
MICROSURGERY
Student Dissecting
Kit
Includes:
Dissecting Scissors, 4.5”
Dissecting Scissors, 4”
Dressing Forceps, 5.5”
Micro Dressing Forceps, 4”
#4 Knife Handle
Straight Teasing Needle
Angled Teasing Needle
#22 Surgical Blade
Canvas Roll-up
501336 . . . . . . . . . . . . . . .
23
US$
Silicone
Dissecting Pad Kit
Make your own silicone dissecting pads easily and
quickly. Mix the 2-part silicone right in the plastic petri
dishes and allow to cure 24 hours at room temperature.
Kit includes enough silicone to prepare 20 dishes.
Kit Includes:
2-Part SylGard silicone elastomer
20 plastic petri dishes, 51mm diameter, with lids
Pins
501986 . . . . . . . . . . . . . . US$138
Surgery Table
Constructed of clear acrylic, this economical surgery table features adjustable nylon cords for fast animal restraint and a slight incline for easy viewing. The acrylic construction is durable, yet easy to clean. The nylon cords
can be adjusted at the point of contact with the animal and also under the
table itself.
The surgery table is designed for use in dissecting small animals such as
frogs, birds, mice, rats, guinea pigs, etc.
SURGERY TABLE Specifications
501892
Length
20 cm
Width
14.5 cm
Height
4 cm (rear)
2 cm (front)
Surgery Table
58
US$
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
168
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Cautery
Disposable Adjustable High Temperature Cautery
MICRODISSECTION
Fine Tip (#500394)
1500-2100° F
10/box, sterile
Tip Profile:
500388. . . . . . . . . . . . . . . US$172
High Temperature Cautery
2 replaceable batteries (AA)
1 interchangeable tip (#500394)
2200° F
500389. . . . . . . . . . . . . . . .
64
US$
500394 tip
High Temperature Cautery Kit
contains 1 #500389 handle,
2 #500394 tips
2 #500393 tips
500392. . . . . . . . . . . . . . . .
500389 handle
74
US$
500394 tip
500393 tip
MICROSURGERY
Disposable Adjustable Low Temperature Cautery
Fine Tip (#500396)
700-1200° F
10/box, sterile
501090. . . . . . . . . . . . . . .
155
Tip Profile:
US$
Low Temperature Cautery
1 replaceable battery (AA)
1 tip (#500396)
500390. . . . . . . . . . . . . . . .
54
US$
500396 tip
Low Temperature Cautery Kit
contains 1 #500390 handle
2 #500396 tips
2 #500395 tips
500391. . . . . . . . . . . . . . . .
500390 handle
74
US$
500395 tip
500396 tip
Disposable High Temp Loop
Tips, 2000° F, 10/box, sterile,
for use in conjunction with
#500389 and #500392
Disposable High Temp Fine Tips,
2200° F, 10/box, sterile, for use
in conjunction with #500389
and #500392
Disposable Low Temp Elongated
Tips, 1100° F, 10/box, sterile,
for use in conjunction with
#500390 and #500391
Disposable Low Temp Fine Tips,
1300° F, 10/box, sterile, , for use
in conjunction with #500390
and #500391
500393 . . . . . . US$67
500394 . . . . . . US$67
500395 . . . . . . US$67
500396 . . . . . . US$67
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
169
Thermal Cautery Unit
MICRODISSECTION
MICROSURGERY
Provides consistent, accurate hemostasis
Tradional thermal cautery utilizes heat in the
form of direct current to perform coagulation.
This method eliminates the possibility of
alternate site burns that can occur with
electrosurgery. Only the heated wire tip comes
in contact with the tissue and current does
not enter the patient’s body. WPI’s Thermal
Cautery Unit provides all the cautery power
necessary for treating numerous minor surgical
conditions and is ideal for applications such as
dermatological, ophthalmological, occupational
health, ENT, and plastic surgery cases, or any
procedure that requires accurate hemostasis.
The Thermal Cautery Unit maintains the
desired temperature during tissue contact
and does not rapidly diminish like disposable
battery powered cauteries. The autoclavable
handpiece with six-foot cord accepts an
assortment of reusable thermal cautery
electrodes, allowing the surgeon to have
the flexibility to perform a wide variety of
procedures. This unit will outlast batterypowered units and save money on replacement
batteries.
a
b
c
d
e
Handpiece and electrodes A, C, and E
are included with unit.
CAUTERY UNIT SPECIFICATIONS
LINE VOLTAGE
110V/220V, 60Hz/50Hz
OUTPUT WAVE SHAPE
Clipped Sinusoidal
OUTPUT POWER
0-30 Watts ± 6 Watts (0.2 Ohm Load)
MAXIMUM OUTPUT POWER
36 Watts (0.2 Ohm Load)
DIMENSIONS
13cm x 13cm x 20cm (dxwxh)
SHIPPING WEIGHT
5 lb (2.3kg)
501292
501293
501294
501295
501296
501297
501298
501299
501300
Thermal Cautery Unit, 110V
Thermal Cautery Unit, 220V
Replacement Handpiece for 501292 & 501293
Loop Tip (shown a) included with unit
Fine Tip-Flat (shown b)
Loop Tip-Angled (shown c) included with unit
Ball Point (shown d)
Fine Tip (shown e) included with unit
Wall Bracket for 501292 & 501293
827
827
US$
217
US$
71
US$
71
US$
71
US$
78
US$
71
US$
67
US$
US$
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
170
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
High Frequency Dessicator
MICRODISSECTION
This High Frequency Dessicator produces radio frequency current
which is useful for the removal and destruction of superficial
cutaneous and mucosal lesions. It performs dessication and
fulguration procedures.The digital power control system allows you
to change from low to high power by rotating the power knob or
pushing the buttons on the handpiece.
Dessicator Specifications
Main Voltage
110/220 VAC
Main Frequency
50/60 Hz
Main Current 1.00A / 800 mA. max.
Power Consumption
80 W
Duty Cycle
10S/30S
Main Fuses
2 x 1.25A (slow blow) 110 model
2 x 800 mA (slow blow) 220 model
HF Output Characteristics
500397
501214
Dessicator Unit (110V) Dessicator Unit (220V) 2030
US$
2030
US$
OPTIONAL ACCESSORIES
501075
Footswitch
501083
Forceps Cord
Optional Accessories
Reusable Bipolar Forceps Reusable (>20 autoclaving cycles)
501005
Bipolar 71/2" Bayonet Fine (1.0 mm), Smooth, Each
501006 Bipolar 71/2" Bayonet Med. (2.0 mm), Smooth, Each
501007
Bipolar 7" Straight, Fine (1.0 mm), Smooth, Each
501008 Bipolar 7" Curved, Fine (1.0 mm), Smooth, Each
501009 Bipolar 5" Curved, Fine (1.0 mm), Smooth, Each
501010
Bipolar 51/2" Straight, Med. (2.0 mm), Smooth, Each
501011
Bipolar 5" Straight, Fine (1.0 mm), Smooth, Each
Reusable Active Electrodes
501004
Reusable Electrode, Each
501013
Angled, Sharp Electrode, Reusable, Each
501014
Short Angled, Ball, ReusableEach
501015
Short Straight, Ball, Reusable, Each
501016
Short Straight, Needle, Reusable, Each
501017
Angled, Fine Needle, Reusable, Each
501018
Long, Straight Ball, Reusable, Each
501019
Long, Straight Needle, Reusable, Each
Dispersive Electrode
501074
Reusable Dispersive Electrode for 500397
Dermal Tips 3/32" stainless steel shaft
501076
Sharp Dermal Tip, Non-Sterile, 100/box
501077
Sharp Dermal Tip, 3/32" Sterile, 50/box
501078
Blunt Dermal Tip, 3/32" Non-Sterile, 100/box
501079 Blunt Dermal Tip, 3/32" Sterile, 50/box
Output Power
30W/1000 W
Output Frequency
550 kHz
Peak Open Circuit Voltage
5000 V
Safety
220
85
US$
US$
396
396
US$
396
US$
396
US$
396
US$
396
US$
396
US$
US$
46
60
Basic Construction
In accordance with EN 60601-1
Mode of Operation
Intermittent Operation
Protection Class
Class 1 Equipment
Output Type
Type BF
Dimensions
22 x 15 x 10.5 cm (8.6” x 6” x 4.2”)
WEIGHT
2.25 kg (5 lb)
Unit Accessories
501080 Top Tray and Clamp Stand for 501081, Each
501081
Mobile stand for 500397
501082 Table top stainless steel stand for 500397
501083 Forceps Cord for 500397
501084 Wall Mount Kit
501085 3 Button Power Control Pencil for 500397
501075
Footswitch, Each
30
US$
220
US$
US$
US$
#501078 — 5.5 cm
60
US$
65
US$
60
US$
60
US$
252
US$
#501076 — 5.5 cm
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
171
MICROSURGERY
Dessicator Unit Includes
501085 3-button handpiece, 1 each
501076 Sharp Tip Non-sterile, 100 box
501078 Blunt Tip Non-sterile, 100 box
501084 Wall mount Kit, 1 each
MICRODISSECTION
MICROSURGERY
Economy
Electrosurgical Unit
Electrosurgery utilizes alternating current at radio frequencies to cut and
coagulate. Using this method, the current enters the patient’s body and
the patient becomes part of the electrical circuit. This requires the use of
a return, or indifference plate.
This economically priced electrosurgical unit has 10 levels of output
intensity, three operational modes (cut, coagulate, and cut/coagulate), and
various choices of electrodes.
The unit comes complete and ready-to-use with a handpiece,
indifference plate, footswitch, and one of each electrodes. All accessories
can also be ordered separately.
ELECTROSURGICAL UNIT SPECIFICATIONS
OPERATION FREQUENCY
1.5 MHz
STABLE & FINE POWER SETTING
10 Steps
POWER SUPPLY
115V ± 10% - 50/60Hz 1.8A, 210VA
230V ± 10% - 50/60Hz 0.9A, 210VA
OUTPUT POWER
70 WATTS ± 5%
WORKING FRQUENCY
1.5-1.7 MHZ ± 5%
DIMENSIONS
24cm x 22cm x 8.5cm (lxwxh)
SHIPPING WEIGHT
10 lb (4.5kg)
Unit includes everything
pictured
501274
501285
501273
501275 501277
501278
501279
501280
501281
501282
501283
501284
501286
Electrosurgical Unit, 110V
Electrosurgical Unit, 220V
Handpiece for electrodes, Ø 1.6mm shaft
Indifference Plate
Footswitch
Diamond Shape Loop Electrode, Ø 1.6mm shaft
Small Loop electrode, Ø 1.6mm shaft
Large Loop Electrode, Ø1.6mm shaft
Fine WIre electrode, Ø 1.6mm shaft
Wire Electrode, Ø 1.6mm shaft
Small Oval Loop Electrode, Ø 1.6mm shaft
Ball Electrode, Ø 1.6mm shaft
Set of 7 Electrodes
503598
503599
OmniDrill35 Micro Drill System, 110 V
OmniDrill35 Micro Drill System, 220 V
888
948
US$
83
US$
47
US$
71
US$
23
US$
23
US$
23
US$
23
US$
23
US$
23
US$
23
US$
120
US$
US$
OmniDrill35
This line-powered micro drill will make easy work of grinding, finishing,
cutting, and drilling bone, teeth, and other material. The high-torque
35,000 rpm (maximum) motor is quiet and has minimal vibration which
reduces wear on the motor and provides greater comfort for the user.
It also features a forward and reverse switch, “E Type” handpiece, and
handpiece holder. The handpiece has a removable nose cone that can be
cleaned and sterilized. It accepts 3/32” and 2.33 mm bur shanks. Unlike
battery-powered drills, this unit will maintain consistent power for the
duration of use. The wide range of speeds allows the user to control the
amount of heat generation.
The following accessories are included with the Micro Drill System:
Qty
4
1
1
1
1
1
1
1
1
1
1
1
4
1
1
Description
Abrading Tip, Rubber
Abrading Tip, Stone
Accessory Stand
Ball Mill, Carbide, #1, .031” Diameter
Ball Mill, Carbide, #2, .039” Diameter
Ball Mill, Carbide, #3, .047” Diameter
Ball Mill, Carbide, #4, .055” Diameter
Ball Mill, Carbide, #5, .063” Diameter
Ball Mill, Carbide, #6, .071” Diameter
Ball Mill, Carbide, #7, .083” Diameter
Ball Mill, Carbide, #1/4, .019” Diameter
Ball Mill, Carbide, #1/2, .027” Diameter
Cutoff Disk
Mandrel, Screw
Mandrel, Threaded
OmniDrill35 SPECIFICATIONS
INPUT
110V, 50/60 Hz
OUTPUT
0-32 Vdc
FUSE
1 amp
OPERATING SPEED RANGE
0-35,000RPM
DIMENSIONS
178 x 114 x 89mm (7 x 4.5 x 3.5in.)
WEIGHT
1.7kg (3.75lbs)
Replacement Accessories
501850
Abrading Tip, Rubber, pk of 20
501851
Abrading Tip, Stone, pk of 5
501852
Accessory Stand
501853
Ball Mill, Carbide, #1, .031” Diameter, pk of 5
501854
Ball Mill, Carbide, #2, .039” Diameter, pk of 5
501855
Ball Mill, Carbide, #3, .047” Diameter, pk of 5
501856
Ball Mill, Carbide, #4, .055” Diameter, pk of 5
501857
Ball Mill, Carbide, #5, .063” Diameter, pk of 5
501858
Ball Mill, Carbide, #6, .071” Diameter, pk of 5
501842
Ball Mill, Carbide, #7, .083” Diameter, pk of 5
501860
Ball Mill, Carbide, #1/4, .019” Diameter, pk of 5
501861
Ball Mill, Carbide, #1/2, .027” Diameter, pk of 5
501862
Cutoff Disk, pk of 20
501863
Mandrel, Screw, pk of 5
501864
Mandrel, Threaded, pk of 5
839
839
US$
US$
54
36
US$
12
US$
59
US$
59
US$
59
US$
59
US$
59
US$
59
US$
59
US$
59
US$
59
US$
54
US$
47
US$
47
US$
US$
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
172
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Sterilizing Trays
MICRODISSECTION
501729
500252
500253
500254
501728
501729
500255
● GE’s ULTEM® resin ensures product strength,
structural integrity and extended life cycle.
Sterilizer tray, 15 x 6 x 2 cm (6 x 2.5 x 0.75 in.), base, silicone mat, lid
Sterilizer tray, 19 x 10 x 2 cm (7.5 x 4 x 0.75 in.), base, silicone mat, lid
Sterilizer tray, 25.5 x 15 x 2 cm (10 x 6 x 0.75 in.), base, silicone mat, lid
Sterilizer Tray, 25.5 x 15 x 4 cm (10 x 6 x 1.5 in.), base, insert tray, lid, 2 mats
Sterilizer Tray for Knife 15 x 6 x 2 cm (6 x 2.5 x 0.75 in.), base, lid, 2 bars
Silicone mat, 38 x 25.5 cm (15 x 10 in.)
36
62
US$
94
US$
216
US$
36
US$
86
US$
US$
● See-through lids make it easy to locate the right instrument.
● Suitable for all methods of sterilization (autoclave, steam, dry heat and
chemical).
● Unique “grid” design in base makes it easy to install the silicone finger
mat required to protect the delicate instruments.
Combination Sterilization
Tray & Storage Case
New
Larger Size!
Stainless steel sterilization case with silicone holding pads
197 x 107 x 32 mm 230 x 150 x 50 mm
14213.............. US$88
501934........ US$119
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
173
MICROSURGERY
Fine surgical instruments are too valuable not
to protect. WPI’s sterilizing trays help reduce
damage from everyday use. With top quality
structural Integrity, these trays are ideal for
the handling and storage of all standard
microdissection and surgical instruments.
These sterilization containers are made of hard anodized aluminum
and can withstand autoclaving and ethylene oxide sterilizing. The nonperforated base has two locking clasps that secure the lid in place. The
perforated lid with disposable filter allows steam and gas to move freely
in and out of the container during sterilization. A silicone mat may be
purchased separately and cut to fit the base of the tray.
501913
501914
501915
501916
500255
Small Aluminum Tray, 300 x 140 x 40 mm
Large Aluminum Tray, 300 x 140 x 70 mm
Single-use Filters, 100 per package
Indication Labels, 100 per package
Silicone Mat, 38 x 25.5 cm
MICRODISSECTION
MICROSURGERY
Aluminum Sterilizing Trays
268
278
US$
58
US$
70
US$
86
US$
US$
Instrument Tip Protectors
Protect your valuable instruments during
cleaning, sterilization, and storage
Steam and gas sterilizable
Radiopaque and latex-free
50 per pack
501341
501342
501343
501344
501345
501346
501347
501348
501349
501340
Tip
Tip
Tip
Tip
Tip
Tip
Tip
Tip
Tip
Tip
Protectors, 1/16” x 3/4” (1.6 mm x 19 mm), size 1, white
Protectors, 5/64” x 3/4” (2 mm x 19 mm), size 2, blue
Protectors, 7/64” x 3/4” (2.8 mm x 19 mm), size 3, green
Protectors, 1/8” x 1” (3.2 mm x 25.4 mm), size 4, red
Protectors, 3/16” x 1” (4.8 mm x 25.4 mm), size 5, yellow
Protectors, 13/32” x 3/4” (10.3 mm x 19 mm), size 6, maroon
Protectors, 1/16” x 3/8” x 1” (1.6 mm x 9.5 mm x 25.4 mm ), size 7, orange
Protectors, 5/64” x 5/8” x 1” (2 mm x 16 mm x 25.4 mm), size 8, brown
Protectors, 1/8” x 1” x 1” (3.2 mm x 25.4 mm x 25.4 mm), size 9, black, Protectors, Assorted Pack of 50, including at least 5 of each size
35
35
US$
35
US$
35
US$
35
US$
35
US$
35
US$
35
US$
35
US$
35
US$
US$
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
174
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Instrument Portfolio
Half-Liter
Ultrasonic Cleaner
Store your instruments in style. Elastic bands
hold instruments in place against soft velveteen
fabric. Portfolio folds in half and zips closed.
Large portfolio holds up to 40 instruments, and
the small portfolio holds up to 10.
501319 Instrument Portfolio, Large
503294 Instrument Portfolio, Small
54
30
US$
US$
UBATH Specifications
INPUT POWER
22W
PEAK OUTPUT
70W, 55 kHz
TANK CAPACITY
0.53L (18 oz.)
TANK I.D.
12.1 x 8.6 x 6.6 cm
(4 /4 x 3 /8 x 2 /8 in.)
TANK O.D.
13.7 x 10.5 x 12.1 cm
(5 /8 x 4 /8 x 4 /4 in.)
SHIPPING WEIGHT
1.8 kg (4 lb.)
3
1
5
3
US$
UBATH-Y Ultrasonic Cleaner (110 V)
268
UBATH-Z Ultrasonic Cleaner (220 V, Euro plug)US$319
UBATH-B Ultrasonic Cleaner (220 V, UK plug) US$319
Specify line voltage
US$
13740
Ultrasonic Detergent (4 lb)
36
US$
14342
Ultrasonic Detergent (1 gal)
47
Dry Sterilizer
Sterilize your microdissecting and tissue culture in­stru­ments, thor­
ough­ly and conveniently, in sec­onds. No chem­i­cals. No flames.
No risk of burns. No dis­in­fec­tant fluids. Glass beads heated to
260°C kills all viruses, aer­o­bic and anaer­o­bic bac­te­ria, yeasts and
spores. (1.5 mm lead-free glass beads in­clud­ed.)
Germinator Specifications
14404
500121
14405
O.D.
17.1 x 13.3 x 12.9 cm
(6 /4 x 5 /4 x 5 /16 in.)
I.D.
5.1 x 10.2 cm (2 x 4 in.)
WEIGHT
2.3 kg (5 lb.)
3
1
1
Dry Sterilizer (110 V)
Dry Sterilizer (220 V)
Extra Glass Beads
521
624
US$
17
US$
US$
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
175
MICROSURGERY
3
3
MICRODISSECTION
Stainless steel tank volume is half a liter. Du­ra­
ble and compact, this unit’s robust all-metal con­
struc­tion allows for continuous duty. Includes
lid.
MICROSURGERY
FInd the manual for the care and handling of surgical instrument at www.wpiinc.com/services/manuals
Cidex Plus
Alconox
Excellent biocide for WPI’s nitric
oxide sen­sors and other sen­si­
tive instruments which cannot be
subjected to alco­hol or autoclave
Powdered Precision Cleaner
l leaves no interfering residues on
reusable labware
l use with manual cleaning or
ultrasonic
Cidex Plus achieves a high level of
dis­in­fec­tion in 20 to 45 min­utes, with
com­plete steril­iza­tion in 10 hours. Cus­
tom test strip allows so­lu­tion to be
test­ed to de­ter­mine if min­i­mum ef­fec­
tive con­cen­tra­tion of gl­u­t­aral­de­hyde is
present. Non-cor­ro­sive to in­stru­ments.
Sur­fac­tant en­hanc­es wet­ting and rinsing
prop­er­ties. Mint scent.
7364
l free rinsing
l corrosion inhibited
Alconox can be used as a paste, a
soak, and ultrasonically. It can be
used on glass, metal, stainless steel,
porcelain, ceramic, plastic, rubber,
and fiberglass. It can also be used on
soft metals such as copper aluminum,
zinc, and magnesium if rinsed promptly.
Passes inhibitory residue test for water analysis and is authorized by
the USDA for use in federally inspected meat and poultry plants.
26
Cidex Plus (quart)
US$
ENZOL
13740
MICRODISSECTION
Enzymatic Detergent
ENZOL Detergent is a mild pH,
enzyme-based, pre­soak-plus-cleaner
for re­mov­ing tough, dried-on or
hard-to-reach or­gan­ic matter from
in­stru­ments be­fore they are dis­in­
fect­ed in CIDEX So­lu­tion. The pro­
teolyt­ic en­zymes break down organic
mat­ter in one easy step. Enzol is fast
— re­sults be­gin in one minute. Pro­
teolyt­ic en­zymes pen­e­trate and break
down pro­tein, re­duc­ing the need
for me­chan­i­cal clean­ing. Ef­fec­tive at
room tem­per­a­ture (no need for hot
water). Safe for in­stru­ments, including
delicate endoscopes; mild pH reduc­es
like­li­hood of cor­ro­sion. Easy to rinse,
so it won’t clog scopes or leave a
residue on instru­ments. Low foam­ing,
making it effective for use in au­to­
mat­ed equip­ment.
7363-4 ENZOL (U.S. gallon)
Used to remove: soil, grit, grime, buffing compound, slime, grease,
oils, blood, tissue, salts, deposits, particulates, solvents, chemicals,
radioisotopes, radioactive contaminants, silicone oils, mold release
agents
Micro Cleaning Brushes, vial of 100
US$
Surgical Instrument
Lubricant
Protect your surgical and dissecting instruments with this
specially formu­lat­ed lubricant.
500126 Surgical Instrument Lubricant (8 fl oz)
17
US$
Instrument
Demagnetizer
79
US$
Instantly magnetize or demagnetize
small surgical instruments and small
steel parts that are over 1.3" in length
and 1/8" in diameter. No batteries or
electricity required. Box is high quality
molded ABS plastic, impact resistant,
and cadmium free. Dimensions are
2" x 2" x1"
501900 Instrument Magnetizer/Demagnetizer
503231
36
Alconox Cleaner (4 lbs)
29
US$
44
US$
The innovative step design lets you control the level of magnetism
imposed on your tools.
To magnetize a tool — Insert tool into the + opening and slide back
and forth. Continue this procedure until the desired level of magnetism is
reached.
To demagnetize a tool — Insert tool at the lowest – opening. Slide back
and forth. Continue the procedure, moving up the next step until the tool
is completely demagnetized.
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
176
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Lab Supplies & Accessories
Epoxies
Carbon Epoxy (2 oz.). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
Silver Epoxy (1 oz.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
Adhesives
Scotch-Weld 4886 (2 oz.).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178
Mini Glue Gun with hot melt glue sticks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
Vetbond Adhesive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180
Silicone Adhesives
Kwik-Gard™ — Sylgard in a mixing applicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178
Sylgard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180
Kwik-Sil Silicone Adhesive Compound. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
RTV Adhesive Sealant. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
RTV Coating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
Sealants
Sylgard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180
Kwik-Cast Silicon Casting Compound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
RTV Sealant. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
Primers
RTV Prime Coat. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
“Super” Adhesives
Cyanoacrylate adhesive, low viscosity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180
Cyanoacrylate adhesive, high viscosity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180
Octyl Cyanoacrylate adhesive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180
Specialty Wires
LAB SUPPLIES
Carbon (with or without PVC coating) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
Hastelloy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
Indium . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
Micro Coaxial Cables. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
Platinum. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
Platinum/Iridium (with or without Teflon coating). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
Silver (with or without Teflon or PVC coating). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
Stainless Steel (with or without Teflon coating). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
Titanium. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
Tungsten. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
Thermocouple Iron plus Constantan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
Thermocouple Chromel plus Alumel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
Accessories
Barbed Tubing Assortment Kit ( polypropylene) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184
Cables and Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186
Clamps & Bases­­­, Non-Magnetic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188
Digital Caliper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181
Digital Micrometer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181
Glass Botom Culture Dishes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 232
g-SPIN™ Microcentrifuge. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190
Lab Coat, Medium Length. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180
Luer-to-Tubing Coupler Assortment Kit (polypropylene). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184
Luer-to-Tubing Coupler Assortment Kit (nylon) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184
Luer Valve Assortment Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184-185
Magnetic Heating Stirrer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181
MicroFil™ Non-metallic Luer-tipped Tubing for Filling Micropipettes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190
Rack Mount Hardware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182
Screwdriver Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181
Silicone Dissecting Pad Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180
Wire Cutters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
177
Adhesives Application Guide
LAB SUPPLIES
Part No. Description
Curing time
Epoxies
4898
Silver filled conductive Epoxy
12 [email protected]; 5 min @150C
7335
Carbon filled conductive Epoxy 48 [email protected]; 5 min @150C
4886
High performance Structural Epoxy
12 [email protected]
Hot melt (EVA)
13316
Mini Glue Gun with glue sticks
As soon as it cools down
Silicone Adhesives/Sealants/Primers 1571
Room temperature vulcanizing
(RTV) adhesive. Acyloxy/moisture
cure system. Acetic acid is cure
by-product.
[email protected]
7128
RTV sealant. Alkoxy/Moisture cure
system. Methanol as cure by-product.
[email protected]
SYLG184 Sylgard, Two parts, vinyl/platinum
cure sealant. Hydrogen as cure
by-products. Very low toxic
[email protected], 15 [email protected]
Kwik-Sil Two part, adhesive. Vinyl/platinum
system, Hydrogen as cure by-products.
Very low toxic.
< 5 [email protected]
Kwik-Cast Two part sealant. Vinyl/platinum
cure system. Hydrogen as cure by-products.
Very low toxic.
< 5 [email protected]
6820
Primer for silicone N/A
Cyanoacrylate
7341
Ethyl Cyanoacrylate, low viscosity
90-120 cps <10 seconds
7342
Ethyl Cyanoacrylate, high viscosity
1100-1600 cps
<30 seconds
­
Vetbond
Butyl Cyanoacrylate, Low toxic
<10 seconds
503763
Octyl Cyanoacrylate, Low toxic
<15 seconds
Useful Applications and Characteristics
Form strong bonding. Used in wire bonding applications.
Connecting conductors that can't be soldered. Constructing or connecting Ag/AgCl pellets. Constructing carbon electrode.
Forms a strong and slightly flexible bond on plastic, metal, and glass. Bonds some low surface .
energy plastic such as PEEK
Easy to use for bonding, needs large gap filling
Bonds wood, glass, metals, and many plastics.
Good moisture resistant and elastic. Low toxic.
Has the best adhesion property in this silicone family. Will bond to many materials.
Good for bonding or sealing electronics circuits (metal).
Coating Patch Clamp electrodes, Cell culture dish, making dissection pads.
Live tissue and nerve studies. Medium strength adhesion.
Sealant for live tissues. Embedding peripheral nerves with electrodes.
Enhances adhesion of silicone adhesives for difficult to bond plastic surfaces
Forms an instantaneous bonding.
Mounting rat/mouse brain slices. Ideal for relatively small gaps and smooth surfaces.Bonds plastic, metals and rubber. Use on brain slice exp. Ideal for larger gaps, allows slightly longer bonding time. Bonds plastic, metals and rubber.
Bonds tissues, alternative to suture, helps small wound healing. Antimicrobial effect. Used in forensic science.
Suitable for surface wound bonding, protection, holding a sensor or other device on the tissue. Scotch-Weld 2216
Structural Epoxy
Kwik-Gard
™
Kwik-Gard is specially packaged
Sylgard 184 silicone for quicker
and easier application, eliminating
the messy procedure of preparing
the mixture before application. Its
special cartridge controls the precise
mixing ratio to ensure proper curing.
The disposable tip mixes resin and
hardener as they are dispensed. Since no air is
introduced during mixing, the resin does not
need degassing for most applications. The mixed
silicone is applied directly to the site, reducing
preparation time and material waste.
Each Kwik-Gard cartridge contains 37 mL of
resin and hardener. The dispensing tip has a dead
volume of 0.75 mL.
KWIKGARD Kwik-Gard Start-up Kit (incl. dispenser, 1 cartridge, 5 tips) US$137
KWIKGLUE Kwik-Gard Refill (2 cartridges, US$
10 dispensing tips)
79
KWIKMIX Dispensing Tips (pkg of 10) US$35
US$
KWIKGUN Kwik-Gard Dispenser
114
Probably still the best epoxy for bonding plastic,
often used as the benchmark for testing the
binding strength of other adhesives. The slightly
rubbery texture also makes it less easy to break
off. It is the only epoxy known that can bond PEEK.
Color: gray. Cures at room tem­per­a­ture.
Shipping weight: 1 lb. (0.5 kg)
4886
Scotch-Weld 2216 (2 oz.)
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
178
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
56
US$
Electrically Conductive
Silver Epoxy
Two-component silver-filled epoxy for elec­tri­cal
connections which cannot be soldered, such as
Ag/AgCl pel­lets. This widely used silver-filled epoxy
features low viscosity and smooth flowing char­ac­
ter. Pure sil­ver is dis­persed in both res­in and hard­
en­er. Cures in 15 min­utes at 120 °C. Mix ra­tio 1:1.
May be premixed and fro­zen for later use.
Shipping weight: 1 lb. (0.5 kg)
4898
213
Silver Epoxy (1 oz.)
US$
Silicone RTV adhesive
(non-acidic)
Electrically Conductive
Carbon Epoxy
Two-component carbon-epoxy, curable at room
and elevated temperatures. Ideal for elec­tro­stat­ic
discharge protection and EMI/RFI shield­ing. 1:1
mix ratio. May be premixed and fro­zen for later
use.
RTV Prime Coat
7335
155
Carbon Epoxy (2 oz.)
US$
Clear silicone seal­ant pro­vides good bond­ing to
plas­tic. Af­ter cure, will with­stand -55 to 200 °C. No
mix­ing re­quired. A handy, gen­er­al pur­pose lab­o­ra­
to­ry sealant. (Releases acetic acid during curing.)
Because it is non-corrosive, this material is ide­al
for use on metal, for en­cap­su­lat­ing small circuits
on connectors. After cure, will withstand -55° to
200 °C. No mixing required.
Shipping weight: 1 lb. (0.5 kg)
Shipping weight: 1 lb. (0.5 kg)
Silicone RTV adhesive
7128
Shipping weight: 1 lb. (0.5 kg)
1571
US$
US$
Mini Glue Gun
Enhances adhesion of silicone adhesives to many
difficult-to-bond plastic surfaces.
Shipping weight: 1 lb. (0.5 kg)
6820
33
RTV Sealant (4.7 oz.)
56
RTV Coating (3 oz.)
RTV Prime Coat, 400 ml (13.5 oz.)
52
US$
Comes with three sticks of spe­cial for­mu­la hot
melt glue. UL ap­proved. 110V 60Hz only.
Ship­ping weight: 1 lb. (0.5 kg)
13316
20
Mini Glue Gun
US$
Low toxicity 5-minute adhesives for live tissues!
Kwik-Cast™ is a very low
• Extremely low toxicity
viscosity silicone elastomer
sealant. It is able to fill small
spaces around nerves and creates
a continuous mass ensuring longterm recording stability. KwikCast is color-coded so mixing is
foolproof. It can be applied and
cured underneath mineral oil. The
slight longer curing time (approx.
3 minutes) makes it more suitable
for stationary preparations and in
vitro tissue studies.
• Excellent moisture resistance
• Cures at room temperature
The properties of this adhesive make it exceptionally useful for
neuroscience applications, peripheral nerve studies and similar
biomedical applications. These new silicone elastomers also eliminate
the mess and time involved in pre-mixing other commonly used
formulations (such as Wacker SilGel® and Sylgard®). Each silicone
elastomer is packaged in a double barrel syringe and is automatically
mixed when pressed out of the mixer tip provided. It can then be
applied directly to the tissue without further mixing. The curing time
of these silicones is short, reliable and reproducible thus eliminating
potential costly guesswork when using other tissue adhesives.
Furthermore, the curing process does not produce heat, which can
otherwise cause tissue damage. WPI’s silicone elastomers are much
less toxic than dental silicone because they contain no surfactant
additives.
WPI’s silicone elastomers are based on recently developed vinyl
terminated siloxane and platinum complex catalysts. They exhibit
exceptional low toxicity before, during and after curing. The traditional
RTV silicone systems produce either acetic acid or alcohol during
condensation; these compounds are toxic to living cells. In contrast,
the only by-product of condensation from WPI’s elastomers is a small
amount of hydrogen gas, which was shown not to cause any effect on
nerve activity in highly sensitive peripheral nerves. Both elastomers
cure on contact with the tissue. Currently, WPI provides rapid-curing
silicone elastomers in two different formulas:
Kwik-Sil™ is a translucent
silicone elastomer adhesive
with medium viscosity. It
has good adhesion and
mechanical property (tear
strength and elongation).
The very short curing time
(approx. 1 minute) make it
especially useful for moving
preparations.
10 mixing tips
included
10 mixing
tips included
KWIK-CAST & KWIK-SIL SPECIFICATIONS
Unmixed
Mix Ratio
Working Time, typically
Viscosity, cps
After Curing 24 hours:
Tear Strength
Elongation
Durometer (shore A-2)
Color
Volume Resistivity, Ω/cm
Shipping Weight
Kwik-Sil
1:1
2-10 minutes
15,000
Kwik-Cast
1:1
2-3 minutes
10,000
90 ppi
650%
30
translucent
1x1015
0.5 lb
44 ppi
60%
36
green
1x1015
0.5 lb
References
Sivitz, et al., “Effect of acute and antecedent hypoglycemia on sympathetic
neural activity and catecholamine responsiveness in normal rats.” Diabetes.
50:1119-1125, 2001.
KWIK-SIL
KWIK-CAST
600009
KWIK-CAST
KWIK-SIL
Silicone Adhesive Compound (two 5-mL syringes)
Silicone Casting Compound (two 5-mL syringes)
Replacement Mixing Tips (pkg of 10)
PRICE BREAK
1-5 pkg
6-9 pkg
US$
US$
98
91
US$
US$
98
91
98
98
US$
33
US$
US$
More than 10
US$
81
US$
81
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
179
LAB SUPPLIES
• Specially formulated for WPI
“Super” Adhesives for Life Science Research
Cyanoacrylate adhesives have been on the market since 1958. Most
industrial or household grade cyanoacrylate is made of shorter alkyl
chain derivatives such as methyl or ethyl cyanoacrylate (WPI’s #7341
and #7342). They are very useful for temporarily holding tissues such
as mounting specimens for microtome sectioning. However, they are not
suitable for bonding wounds on live animals. The difficulties of using
cyanoacrylate for bonding live animals are: (1) a strong, irritating odor;
(2) quick loss of bonding strength due to breakdown of the bonding by
hydration; (3) the breakdown products, cyanoacetate and formaldehyde,
are toxic and can cause inflammatory reactions; and (4) they have low
flexibility and tend to be brittle.
To overcome these problems, several longer alkyl chain cyanoacrylates
have been developed especially for veterinary and human use. The first
longer alkyl chain product
is butyl cyanoacrylate. This
product has been used
for animal and human
applications outside the USA
since 1970. It is much less
toxic and has a lower odor
than the methyl or ethyl
cyanoacrylate. The butyl
cyanoacrylate offered by WPI
is Vetbond™.
A family of adhesives
containing octyl cyanoacrylate, a plasticizer and stabilizer, was developed
In the 1990’s (one of them approved by FDA for human use). When
bonding to tissue, these new adhesives are four times stronger and less
toxic than butyl cyanoacrylate. Compared with the traditional suture,
the new super adhesive has several advantages. On average, it takes
LAB SUPPLIES
Sylgard
only one-tenth of the time
to close an incision. The
bonding strength is equal
to 5-0 monofilament suture.
It also has a mysterious
antimicrobial effect that
can decrease infection rates
in contaminated wounds.
Bonding will slough off
naturally in 5 to 7 days.
Cosmetic appearance of the
healed incision is also better.
Gluture Topical Tissue
Adhesive #503763 forms
a strong and flexible film
and is thus more suitable for
surface wound bonding, protection, and holding a sensor or other device
on the tissue. Setting time is about 10 seconds, which gives ample time
for application. It can also be used for temporarily holding a live tissue.
For example, there is a report of using it to hold nematodes on a glass
slide for patch-clamp neurons recording.
All of the products offered by WPI are veterinary grade (not suitable for
human application). Though very similar to the grade for human use, they
are not sterile and do not have FDA approval.
US$
503763
Gluture Topical Tissue Adhesive (10 tips), 1.5 mL
56
US$
7341
Cyanoacrylate Adhesive, low viscosity—90-120 cps (pkg of 10)
40
7342
Cyanoacrylate Adhesive, high viscosity—1100-1600 cps (pkg of 10) US$40
US$
VETBOND 3M Vetbond™ Adhesive (3 mL)
29
Silicone
Dissecting Pad Kit
A two-part silicone elastomer,
ideal for pot­ting and en­cap­su­lat­
ing applications. Very low di­elec­tric
constant sealing com­pound used in
patch clamp­ing and many other lab
applications. After cure, will with­
stand -55° to 200 °C.
Shipping weight: 2 lb. (1 kg)
SYLG184
Sylgard (1.1 lb)
114
US$
Lab Coat
Light weight, medium length
— for the lab professional
LABCOAT-XS
LABCOAT-S
LABCOAT-M
LABCOAT-L
LABCOAT-XL
Lab
Lab
Lab
Lab
Lab
Coat,
Coat,
Coat,
Coat,
Coat,
Extra Small
Small
Medium
Large
Extra Large
29
29
US$
29
US$
29
US$
29
US$
US$
Quantity discount available
Make your own silicone dissecting pads easily and quickly. Mix the
2-part silicone right in the plastic petri dishes and allow to cure 24 hours
at room temperature. Kit includes enough silicone to prepare 20 dishes.
Kit Includes:
2-Part Sylgard silicone elastomer
20 plastic petri dishes with lids, 65mm
Pins
501986
Silicone Dissecting Pad Kit
132
US$
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
180
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Digital Caliper & Micrometer
The high quality electronic digital
caliper and micrometer are useful
tools — no laboratory should
be without one because they
are more accurate and easier to
use than the traditional analog
units. Measure in either inches
or millimeters at the touch of a
button. The floating zero feature
allows you to read the increment
without calculation. Both of them
have the SPC output for interface
with external readout devices. The
caliper is made from hardened
stainless. The micrometer meets
the IP54 as defined in the IEC529
standard that is resistance to dust
and splashing water. The caliper
measures up to 150 mm (6
inch) with 0.01 mm (or 0.0005")
resolution. The micrometer
measures up to 25 mm (or 1 inch)
501601
503036
502157
with 0.001 mm (or 0.00005")
resolution.
The micrometer is designed to be
water-resistant to IP54 as defined
in the IEC529 standard. The IP54
code’s first digit “5” means dustprotected. The second digit “4”
means that the caliper is protected
against splashing water — it has
to withstand a shower from every
direction for 10 minutes.
Digital Caliper Digital Micrometer
Replacement Battery (package of 10)
75
148
US$
35
US$
Digital
Caliper
US$
Digital Micrometer
Screwdriver Set
Wire Cutters
12cm long
Notched blade
Roger Wirecutting Scissors
LAB SUPPLIES
501321
23
US$
This production grade precision 5-piece screwdriver set is the highest
quality tool you can find on the market. Made by German craftsmen,
the chrome-vanadium tips will fit any screw securely without leaving
marks. The set contains an ESD safe handle with 8 interchangeable
blades. Phillips Sizes: 000, 00, 0, 1. Slotted Sizes: 1.5, 2.0, 3.0, 3.5
mm. The 000 size Philips blade is the smallest you can find anywhere — it can fit smallest screw on a 35 mm camera.
Weight: 0.24 lb
Magnetic
Heating
Stirrer
501635
Professional Quality Screwdriver Set
The Magnetic Heating Stirrer enjoys
the advantages of convenience, stable
and steady operation as well as
indefinite speed regulation. It can
carry out stable and precise
agitation of solutions in
a relatively common
temperature range. It
is especially suitable
for agitation of small
volume samples.
501610 US$
56
Specifications
Speed Range
Tray Diameter
Heating Power
Power Supply
Dimensions
Stirring Power
Temperature
0-1400 rpm
12 cm
100 W
AC 110 V / 50 Hz
23 x 16 x 10 cm
3-6W
20°C - 210°C
WPI-02 Magnetic Heating Stirrer World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
229
US$
181
Rackmounting Hardware
Many instruments may be mounted in standard 19-inch
instrument racks with the ap­pro­pri­ate rackmount kit, as
noted on the page featuring the instrument.
Brackets for
instruments which are less than
17.5 inches wide have “wings” which extend to the
stan­dard rack width. (Pictured: #13024)

2932
Rackmount Kit, 31⁄2-in. high
3468
Dual Rackmount Kit
(705, A320, A362, A382, A385)


LAB SUPPLIES
2933

3484
114
US$
114

Rackmount Kit, 5 ⁄4-in. high
13025 Dual Rackmount Kit (TBM-4 & BP-1)
2935
114
US$
3469

Single Rackmount Kit (705,
A320, A362, A382, A385)
Rackmount Kit, 8 3⁄4-in. high
114
US$
114
US$
800283

114
US$
DAM Series amplifiers and Iso-DAM
amplifiers may be mount­ed to the rack
panels above by fastening bolts (included)
through holes in the panel.
US$
1

Rackmount Kit for DAM Series amplifiers
Rackmount Kit with Handles
 ‑ 114
US$
114
US$
13024 Single Rackmount Kit (TBM-4 & BP-1)
114
US$
Dual rackmount
kits allow many smaller in­stru­ments
to be joined by bolting the chassis to­geth­er and
mounting the pair into a standard rack. (Pictured: #2932)
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
182
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Precious Metal and Specialty Wire
0.
61
!
m
m
Micro Coaxial Cables
Metal
AGT0510
AGT0525
AGT05100
AGT1010
AGT1025
AGT10100
AGT1510
AGT1530
AGW0510
AGW0530
AGW1010
AGW1030
AGW1510
AGW1530
AGW2010
AGW2030
AGW4010
AUW0170
AUW201
C3005
CPVC4050Y
CPVC4050G
CPVC4050R
CPVC4050W
CU7T44G
IN1003
PT1002
PT0402
PT0203
PT0110
PTP101
PTP201
PTP401
PTP406
PTT0502
PTT0402
PTT0203
PTT0110
SS31605
SS31614
SST30407-25
SST30407-50
TCJ3050
TCK3050
TI2051
TI4024
TGW0325
TGW0515
TGW1510
Silver
Teflon
Silver
Teflon
Silver
Teflon
Silver
Teflon
Silver
Teflon
Silver
Teflon
Silver
Teflon
Silver
Teflon
Silver
—
Silver
—
Silver
—
Silver
—
Silver
—
Silver
—
Silver
—
Silver
—
Silver
—
Gold
—
Gold
—
Carbon
—
Carbon
PVC (yellow)
Carbon
PVC (green)
Carbon
PVC (red)
Carbon
PVC (white)
Copper Alloy Nylon/Polyurethane
Indium
—
Platinum / Iridium
—
Platinum / Iridium
—
Platinum / Iridium
—
Platinum / Iridium
—
Platinum
—
Platinum
—
Platinum
—
Platinum
—
Platinum / Iridium
Teflon
Platinum / Iridium
Teflon
Platinum / Iridium
Teflon
Platinum / Iridium
Teflon
Stainless Steel
—
Stainless Steel
—
Stainless Steel
Teflon
Stainless Steel
Teflon
Thermocouple Glass braid
(Iron + Constantan)
Thermocouple Glass braid
(Chromel + Alumel)
Titanium
—
Titanium
—
Tungsten
—
Tungsten
—
Tungsten
—
Microcoaxial Cables
MAX3820
Tinned Cu Alloy
MAX4020
Tinned Cu Alloy
Coating AWG*
Diameter
Precut Length Price
36
0.005 in. (0.125 mm)1
36
0.005 in. (0.125 mm)1
36
0.005 in. (0.125 mm)1
30
0.010 in. (0.25 mm)1
30
0.010 in. (0.25 mm)1
30
0.010 in. (0.25 mm)1
26-27
0.015 in. (0.38 mm)1
26-27
0.015 in. (0.38 mm)1
36
0.005 in. (0.125 mm)
36
0.005 in. (0.125 mm)
30
0.010 in. (0.25 mm)
30
0.010 in. (0.25 mm)
26-27
0.015 in. (0.38 mm)
26-27
0.015 in. (0.38 mm)
24
0.020 in. (0.5 mm)
24
0.020 in. (0.5 mm)
18
0.040 in. (1.0 mm)
50
0.001 in. (0.025 mm)
24
0.020 in. (0.5 mm)
49
0.0012 in. (30 µm)
18
0.040 in. (1.0 mm)
18
0.040 in. (1.0 mm)
18
0.040 in. (1.0 mm)
18
0.040 in. (1.0 mm)
30
0.010 in. (0.20 mm)
30
0.01 in. (0.25 mm)
30
0.010 in. (0.25 mm)
38
0.004 in. (0.102 mm)
44
0.002 in. (0.051 mm)
50
0.001 in. (0.025 mm)
30
0.010 in. (0.25 mm)
24
0.020 in. (0.5 mm)
18
0.039 in. (1.0 mm)
18
0.039 in. (1.0 mm)
36
0.005 in. (0.125 mm)1
38
0.004 in. (0.102 mm)1
44
0.002 in. (0.051 mm)1
50
0.001 in. (0.025 mm)1
36
0.005 in. (0.125 mm)
27
0.014 in. (0.36 mm)
33
0.007 in. (0.18 mm)3
33
0.007 in. (0.18 mm)3
30
30
24
38
40
36
26-27
0.020 in. (0.5 mm)
0.040 in. (1.0 mm)
0.003 in. (0.075 mm)
0.005 in. (0.125 mm)
0.015 in. (0.38 mm)
10 ft (3 m)
Call
25 ft (7.6 m)
Call
100 ft (30 m)
Call
10 ft (3 m)
Call
25 ft (7.6 m)
Call
100 ft (30 m)
Call
10 ft (3 m)
Call
30 ft (9.1 m)
Call
10 ft (3 m)
Call
30 ft (9.1 m)
Call
10 ft (3 m)
Call
30 ft (9.1 m)
Call
10 ft (3 m)
Call
30 ft (9.1 m)
Call
10 ft (3 m)
Call
30 ft (9.1 m)
Call
10 ft (3 m)
Call
70 ft (21 m)
Call
1 ft (25.4 cm)
Call
US$
5 ft (1.5 m)
56
US$
50 ft (15 m)
69
US$
50 ft (15 m)
69
US$
50 ft (15 m)
69
US$
50 ft (15 m)
69
US$
16.5 ft (5 m)
63
US$
3 ft (76 cm)
86
2 ft (51 cm)
Call
2 ft (51 cm)
Call
3 ft (76 cm)
Call
10 ft (3 m)
Call
1 ft (25.4 cm)
Call
1 ft (25.4 cm) Call
1 ft (25.4 cm)
Call
0.5 ft (12 cm)
Call
2 ft (51 cm)
Call
2 ft (51 cm)
Call
3 ft (76 cm)
Call
10 ft (3 m)
Call
US$
50 ft (15.2 m)
45
US$
30 ft (9.1 m)
45
US$
25 ft (7.6 m)
79
50 ft (15.2 m) US$127
US$
50 ft (15.2 m)
75
50 ft (15.2 m)
24 ft (7.3 m)2
24 ft (7.3 m)2
25 ft (7.6 m)
15 ft (4.6 m)
10 ft (3 m)
Coaxial
0.0173 in. (0.44 mm)
20 ft (6 m)4
Twin Coaxial
0.0158x0.024 in. (0.4x0.61mm) 20 ft (6 m)5
75
US$
316
183
US$
79
US$
79
US$
79
US$
US$
102
114
US$
US$
*Brown & Sharpe
1
Plus 0.002 in. for Teflon coating 2 Furnished in bundles of 3-ft lengths.
3
Teflon adds 0.00015 in. (4 µm) to diameter4 Impedance: 50 ohm; capacitance: 95 pF/m; resistance: 5 ohm/m
5
Impedance: 100 ohm; capacitance: 54 pF/m; resistance: 1.9 ohm/m
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
183
LAB SUPPLIES
New! Micro coaxial cables (MAXxxxx)
are ideal for microelectrode fabrication
and construction of similar research tools.
The dual shielding eliminates electrical
interference caused by radio frequencies (RF),
electrostatic and microphonics (e.g., bending
and vibration. Available with single or dual
(twin) conductors.
Thermocouple wire for tem­per­a­ture mon­i­tor­
ing. TCJ3050, with an iron/con­stan­tan pair of
wires, can be used in inert, vac­u­um, re­duc­ing
or oxidizing atmospheres (iron con­duc­tor may
rust in moist or low temperature ap­pli­ca­tions).
TCK3050 has a chromel/alumel pair, for use
in inert or oxidizing atmosphere at 15001800 °F.
Teflon-coated stainless steel (type 304) wire
(SSTxxxx) is available in 25-ft and 50-ft
lengths. The Teflon coating is 150 micro-in.
thick (4 µm).
Carbon wire (C3005) is a single 30-micron
fiber of electrochemically activated car­bon.
This fiber is especially useful in micro-elec­tro­
chem­i­cal experiments.
Carbon filament wire (CPVCxxxx) is made
of 3,000 microscopic carbon strands in a col­
ored PVC jacket. 45.8 ohms/foot.
Copper ultra-fine wire (CU7T44G) is made
of seven individually insulated 44 AWG (50
micron) conductors twisted together. Total
diameter with insulation is 200 microns.
Resistance: 2.9 Ω/m for all seven wires
together. Dry dielectric strength: 1500V DC.
Platinum/iridium wire — uncoated (PTxxxx)
and Teflon-coated (PTTxxxx) — is an alloy
of 90% platinum and 10% iridium, giving
excellent tensile strength and cor­ro­sion
resistance. Uncoated pure platinum wire
(PTPxxx) is 99.95% pure.
Indium wire (IN1003) is 99.99% pure, with
a melting point of 156.4°C.
Annealed silver wire (AGWxxxx), 99.99%
pure, is available in five diameters; three of
those sizes are also available with a Teflon
coating (AGTxxxx).
Tungsten wire (TGWxxxx), available in
three diameters, is 99.95% pure.
Gold wire (AUWxxxx) is 99.99% pure.
Titanium wire (TIxxxx) is 98.9% pure,
annealed, in two diameters.
Stainless steel wire (SSxxxxx) is type 316.
Catalog No.
Luer Valve Assortment Kit
A useful kit (above) for building your own liquid flow experiment. It provides the means to start, stop, add, divide and control a flow of liquid or gas.
Included in the kit are over 200 as­sort­ed parts such as one-way and three-way stopcocks, manifolds, Y-connectors, in­jec­tion sites, male and female luer
caps, check valves, syringe-activated check valves, slide clamps, roller clamps, and pinch
US$
14011
Luer Valve Assortment Kit
305
clamps. All (except clamps) have a luer fitting for quick and easy con­nect­ing and
disconnecting. Includes assorted luer fittings for use with flex­i­ble tubing.
LAB SUPPLIES
Barb-to-Tubing Coupler Assortment Kit
Barb-to-Tubing Assortment Kit (at left) includes three different sizes
of tubing and two boxes with different fittings, T-connectors, elbow
connectors, check valves and plugs.
500890
Barb-to-Tubing Assortment Kit (polypropylene)
190
US$
Includes 25ft. each of three tubing sizes: 1/16" ID, 1/8" ID, 1/4" ID
Luer-to-Tubing Coupler Assortment Kit Assemble quick-disconnect luer fittings for use with flexible tubing with internal
diame­ters of 1⁄16", 3⁄32", 1⁄8" and 5⁄32". A variety of quick-disconnect connectors can be
quickly made for con­nect­ing small diameter flexible tubing; 3-way connections can
be made with the use of the 3-way luer tee; luer plugs, tees, connectors, bulk-head
mounts, color coding rings, locking nuts, male and female luers—are all in­clud­ed to
enhance the ver­sa­til­i­ty of this kit. The kit has 253 assorted parts and is offered
in two different types of materials. Polypropylene fittings are chemically inert and
resistant to most organic and inorganic solvents. Nylon fittings are strong and can be
bonded with adhesive.
US$
14012
Luer-to-Tubing Coupler Assortment Kit (Polypropylene)
190
US$
500895
Luer-to-Tubing Coupler Assortment Kit (Nylon) 190
14012
500895
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
184
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
3/
1⁄
32" ID Tubing
Pack of 100
US$
68
# 13157-100
Female Luer
Fitting for
# 13156-100
Female Luer
Fitting for
8" ID Tubing
Pack of 100
US$
68
1⁄
/32" ID Tubing
Pack of 100
US$
68
5
# 13159-100
Female Luer
Fitting for
16" ID Tubing
Pack of 100
US$
68
1⁄
/32" ID Tubing
Pack of 100
US$
68
3
8" ID Tubing
Pack of 100
US$
68
1⁄
# 14043-20
Roller Clamp
Large Bore
Pack of 20
US$
68
# 14061-60
Male/Female
Luer Plug
Pack of 60
US$
68
# 14051-100
Pinch Clamp for
5mm Tubing
Pack of 100
US$
68
# 14040-50
Pinch Clamp for
7mm Tubing
Pack of 50
US$
68
/32" ID Tubing
Pack of 100
US$
68
5
# 13163-100
Male Luer
Fitting for
# 14035-10
3-Way Stopcock,
Luer lock,
Pack of 10
US$
68
# 13162-100
Male Luer
Fitting for
# 14059-2
3-Port Manifold
Pack of 2
US$
68
# 14058-10
4-Way Stopcock,
Luer Lock
Pack of 10
US$
68
# 14041-60
Roller Clamp
3⁄ " Tubing
16
Pack of 60
US$
68
# 13161-100
Male Luer
Fitting for
# 14036-15
4-Way Luer
Stopcock
Pack of 15
US$
68
# 13822-10
0.135”/3.4 mm
OD Tubing
Pack of 10
US$
68
# 13160-100
Male Luer
Fitting for
# 14057-10
4-Way Stopcock,
Luer Lock
Pack of 10
US$
68
# 14045-20
Syringe
Slip Luer Valve
Activated Check
Pack of 20
US$
68
LAB SUPPLIES
16" ID Tubing
Pack of 100
US$
68
# 14055-2
4-Port Manifold
Pack of 2
US$
68
# 14054-10
1-Way Stopcock,
Luer Slip
Pack of 10
US$
68
#14038-10
1-Way Stopcock
Luer Lock,
Pack of 10
US$
68
# 13158-100
Female Luer
Fitting for
# 14048-20
3-Port Infusion Y
Swivel Thread
Pack of 20
US$
68
# 14044-5
Syringe
Activated Dual
Check Valve
Pack of 5
US$
68
# 14047-10
4-Port Infusion Y
Swivel Thread
Pack of 10
US$
68
# 14039-10
Check Valve
Pack of 10
US$
68
# 3742-20
Female T Luer
Pack of 20
US$
68
#14034-40
Injection Site
Male luer lock
Pack of 40
US$
68
# 14042-100
Slide Clamp
for 2.5 mm
O.D. Tubing
Pack of 100
US$
68
Parts now sold individually
Buy parts from Luer Valve Assortment Kit 14011 individually
Parts in kit may differ slightly in appearance from those pictured.
185
Cables and Connectors
#1358
#3161
#3294
#13620
#3492
#2851
#5372
#3142
#3417-10
#3517
#3508
#3491
#5371
#5385
#5373
#3670
#5375
#13388
#13451
#5374
LAB SUPPLIES
#13776
#13347
#500082
#13324
#500131
#14254
#15975
#15976
#500081
#13854
#3578
#300040
#300102
#15623
#500256
#13685
#500128
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
186
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
POWER CORDS
3006
3301
3302
14088
US 120 V, grounded
European 240 V, grounded
British 240 V, grounded
Australian 240 V, grounded
#CBL100
IEC Connector
IEC Connector
IEC Connector
IEC Connector
#CBL102
3-pin (M) US
3-pin (M) European
3-pin (M) UK
3-pin (M) Australian
PRICE
52
24
US$
30
US$
25
US$
29
US$
10
US$
24
US$
127
US$
21
US$
US$
45
102
US$
46
US$
15
US$
21
US$
22
US$
24
US$
40
US$
40
US$
124
US$
28
US$
29
US$
75
US$
29
US$
39
US$
22
US$
15
US$
15
US$
15
US$
15
US$
39
US$
39
US$
15
US$
15
US$
79
US$
91
US$
21
US$
9
US$
95
US$
6
US$
33
US$
32
US$
15
US$
22
US$
22
US$
22
US$
63
US$
46
US$
33
US$
16
US$
32
US$
US$
6 ft (1.8 m)
6 ft (1.8 m)
6 ft (1.8 m)
6 ft (1.8 m)
21
26
US$
32
US$
32
US$
US$
#15624
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
187
LAB SUPPLIES
PART #
APPLICATION/DESCRIPTION
CONNECTOR A
CON­N EC­TOR B
CABLE
LENGTH
1358
Beetrodes
BNC (male)
2 mm pin
3 ft (0.9 m)
2 mm socket, unwired (pkg of 10) (Not Shown)
2 mm socket
unwired
none
2026-10
2851
Standard BNC cable
BNC (male)
BNC (male)
5'2"
3142
Mini-Banana Adapter
Screw Terminals
Dual Mini-Banana
none
3161
Connector for input to TBM4M and BP-1
DIN (male)
unwired
none
3294
Ground wire for DAM80 probe
Clip
none
3 ft (0.9 m)
2 mm plug, unwired (pkg of 10)
2 mm pin
unwired
none
3417-10
3491
Extension for any 8-pin DIN
DIN (male)
DIN (female)
5 ft (1.5 m)
3492
Connector, adapts WPI transducers to non-WPI equip­ment DIN (female)
unwired
none
3508
Adapts BNC pH electrode to pH meter with
“U.S. Standard” input
BNC (male)
US Standard
none
DAM50, DAM60, DAM70, shielded (two cables/pkg)
Modular phone plug, 4 wire
none
3 ft (0.9 m)
3517
3578
Adapter cable for Ag/AgCl pellets 2 mm pin
none
5 ft (1.5 m)
3670
Double banana plug with solder turret terminals
Dual Banana (male)
Dual Banana (female)
none
5371
Low-noise cable for microelectrode holders
2 mm gold pin
2 mm gold pin
2 ft (0.6 m)
5372
Low-noise cable for microelectrode holders
2 mm gold jack
2 mm gold jack
2 ft (0.6 m)
Low-noise cable for microelectrode holders
Com­bi­na­tion pin/jack
Combination pin/jack
2 ft (0.6 m)
5373
5374
Low-noise cable for microelectrode holders
BNC (male)
2 mm gold pin
4 ft (1.2 m)
5375
Low-noise cable for microelectrode holders
BNC (male)
2 mm gold jack
4 ft (1.2 m)
5385
Cable, shielded transducer stock none
none
25 ft (7.6 m)
13324
Derm-Trode, Iso-Millivoltmeter
Double-banana (female)
BNC (male)
none
ISO2 (chart recorder adapter)
Double-banana (male)
BNC (female)
none
13347
Electrode adapter for DAM probes
Miniature banana (male)
2 mm jack
none
13388
Adapter: Iso-DAM, Iso-DAM8
BNC (female)
two 2 mm pins
6 in. (15 cm)
13451
Serial Cable (not shown)
DB9 (male)
DB9 (female)
6 ft (1.8 m)
13555
Low-noise cable for microelectrode holders
2 mm gold pin
2 mm gold jack
2 ft (0.6 m)
13620
SP Series pump-to-pump linking cable Modular phone plug
Modular phone plug
7 ft (2.1 m)
13685
Adapts reference electrode to VF4 ground jack
Banana (male)
2 mm jack
none
13776
BNC T-connector, male to:
BNC (female)
BNC (female)
none
13854
BNC Straight Adapter
BNC (female)
BNC (female)
none
14254
Serial cable and adapter, SP Series pump SP Pump
IBM 9-pin “D” connector
5 ft (1.5 m)
15623
Serial cable and adapter, SP Series pump
SP Pump
Macintosh connector
5 ft (1.5 m)
15624
Adapter
2 mm socket
1 mm pin
none
15975
Adapter
1 mm socket
2 mm pin
none
15976
Adapter Extension 2 mm socket
2 mm socket
4 in. (10 cm)
300040
Cable
DIN
BNC
300344
Adapter IBM PC Comm Port
DB9 (male)
DB9 (female)
none
500081
Adapter BNC/RCA MM
BNC (female)
RCA (male)
none
500082
Adapter Extension 2 mm socket
0.31 socket
4 in. (10 cm)
300102
BNC Zero Ohm Terminator
BNC (male)
none
none
500128
Cable for Biode® Snap Electrodes (assembly of 5)
500131
2 mm pin
snap
39 in. (1 m)
Standard BNC Cable
BNC (male)
BNC (male)
10 ft (3 m)
500184
BNC Right Angle Adapter BNC (male)
BNC (female)
none
500256
Standard BNC Cable
BNC (male)
BNC (male)
6 in. (15 cm)
500257
Standard BNC Cable
BNC (male)
BNC (male)
12 in. (30 cm)
500258
Standard BNC Cable
BNC (male)
BNC (male)
18 in. (46 cm)
500259
501670
Coaxial Adapter
Dual Mini-Banana (male)
BNC (female)
none
503301
Cable, Extension
8-pin miniDIN (male)
8-pin miniDIN (female)
10 ft (3 m)
503536
Cable, USB
USB (male)
USB (female)
10 ft (3 m)
CBL100
MiniPhone Patch Cable
3.5 mm MiniPhone plug
3.5 mm MiniPhone plug
6 ft (1.8 m)
CBL102
DAM Series, PM Series
3.5 mmMiniPhone plug
BNC (male)
6 ft (1.8 m)
FrameWorks
Non-Magnetic Bases,
Stainless Steel Rods, & Clamps
43
These high quality components are made of
stainless steel and polymer that resist organic
solvents and corrosion. They can be easily
assembled to make a stand-alone setup for
student labs or to make a complicated frame for
research labs.
m
m
LAB SUPPLIES
503081-4 Vertical Surface Mount, M8 Threaded............................... (including three 10-32 mounting screws) (pkg of 4)
503085
Large V-base with M8 Thread Mount
502190 Heavy Rectangular Base (with M8 thread mount ...................
and thumbscrew mount), 23×15.6 cm, 4 lb
503083 Light Rectangular Base (with M8 thread mount ......................
and thumbscrew mount), 23×15.6 cm, 0.5 lb
503084
Small V-base with M8 Thread Mount
503088-10
Thumbscrew, M5×20 mm (pkg of 10)
503070
503071
503072
503073
502191
503075
503076
503077
Polished Stainless Steel Post, 12mm OD, 25cm long, no thread
Polished Stainless Steel Post, 12mm OD, 50cm long, no thread
Polished Stainless Steel Post, 12mm OD, 75cm long, no thread
Polished Stainless Steel Post, 12mm OD, 25cm long, M8 thread
Polished Stainless Steel Post, 12mm OD, 50cm long, M8 thread
Polished Stainless Steel Post, 12mm OD, 60cm long, M8 thread
Polished Stainless Steel Post, 12mm OD, 75cm long, M8 thread
Polished Stainless Steel Post, 12mm OD, 80cm long, M8 thread
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
188
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
14073-4 Open-sided Frame Clamp (pkg of 4)
503082-4Board Frame Clamp, opens up to 8.5 mm (pkg of 4)
503078-4 T-joint Frame Clamp (pkg of 4)
502193-4 Parallel Frame Clamp (pkg of 4)
503079-4 In-line Frame Clamp
(pkg of 4)
38.7 mm
503080-4 Frame Clamp with
Parallel Surface Mount (including two
10-32 mounting screws)
(pkg of 4)
LAB SUPPLIES
503041
Large Clamp with Rod (157 mm), opens up to 85 mm
503042
Medium Clamp with rod (157 mm), opens up to 45 mm
503086
Small Clamp with rod (157 mm), opens up to 16 mm
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
189
g-SPIN™
Microcentrifuge
l Small size with rubber feet keeps the centrifuge stable
l Supplied with interchangeable rotors and adapters for
0.5mL-2.0mL microtubes and PCR strips
l On/off switch lets you start and stop in seconds
l Safety switch stops rotor without cover in place
g-SPIN Specifications
Speed range
6000 rpm, fixed
Max. RCF
2000× g
Tube capacity
6 x 0.5/2.0 mL tubes 2 x 0.2 mL strip tubes
Rotor
Fixed angle 6-place 0.5—2.0-mL tubes 2 strips PCR 0.2 mL tubes
Dimensions
6"W x 5"H x 7"D
Power
110V 60 Hz or 220V 50 Hz
LAB SUPPLIES
Also available: 4,000 RPM and 10,000 RPM units
— call for details.
MicroFil
™
G-SPIN6
G-SPIN6-220
503529
503530
503531
503532
503537
Microcentrifuge, 6000 RPM, 110V 60 Hz
Microcentrifuge, 6000 RPM, 220V 50 Hz, CE
Microcentrifuge tube, 0.5 mL, natural, bag/1,000
Microcentrifuge tube, 1.5 mL, natural, bag/1,000
Microcentrifuge tube, 2.0 mL, natural, bag/1,000
Microcentrifuge tube strips, 0.2 mL, and domed cap strips, bag of 250
Microcentrifuge tube strips, 0.2 mL, and flat cap strips, bag of 250
WPI’s MicroFil™ fills micropipettes easily and
reli­ably. Its long and fine tip allows you to start
the filling very close to the pi­pette tip, elim­i­
nat­ing both air bub­ble for­ma­tion and clog­ging
due to the wash­ing down of dust particles. The
trans­par­ent amber MicroFil needle is con­struct­
ed from a com­bi­na­tion of plastic and fused
silica — no met­al com­po­nents are used. The
MicroFil needle can be stored for days with the
filling solution inside without clogging.
MF34G-5
MicroFil, 34 ga., 67 mm long (pkg of 5)
MF28G-5
MicroFil, 28 ga., 97 mm long (pkg of 5)
MF28G67-5 MicroFil, 28 ga., 67 mm long (pkg of 5)
286
286
$
45
$
56
$
56
$
216
$
216
$
$
The MicroFil’s tip elas­tic­i­ty is sturdy and very
flexible though not un­break­able. Since it is
more flex­i­ble than stainless steel nee­dles,
moderate bending will not block or dam­age
the MicroFil needle. The com­bi­na­tion of plas­tic
and fused silica in the MicroFil tip is sturdier
than plastic tips, allowing easy and repeated
in­ser­tions into mi­cropi­pettes. MicroFil’s luer
fitting allows easy coupling to syringes and
syringe filters.
1-5 pkgs
US$
56
US$
56
US$
56
6-10 pkgs
US$
45
US$
45
US$
45
U.S. PATENT 5,294,325
Custom MicroFil
Nonmetallic
syringe needle for
filling micropipettes
All MicroFil products, including custom orders, can be shipped immediately. Custom orders for special
needs can be made using nine sizes of MicroFil tubing in lengths up to 50 cm — except for CMF90UxxL
which has a maximum length of 10 cm because of its high resistance to flow. Quantity discounts
available. Specify length when or­der­ing by in­sert­ing the length (in centimeter in­cre­ments) into the
catalog number in place of the XX’s.
US$
137
CMF20GxxL MicroFil, 20 Gauge, 700 µm ID, 850 µm OD (pkg of 4)
US$
CMF22GxxL MicroFil, 22 Gauge, 530 µm ID, 700 µm OD (pkg of 4)
137
US$
CMF23GxxL MicroFil, 23 Gauge, 530 µm ID, 665 µm OD (pkg of 4)
137
US$
CMF26GxxL MicroFil, 26 Gauge, 320 µm ID, 430 µm OD (pkg of 4)
137
US$
CMF28GxxL MicroFil, 28 Gauge, 250 µm ID, 350 µm OD (pkg of 4)
137
US$
CMF31GxxL MicroFil, 31 Gauge, 100 µm ID, 238 µm OD (pkg of 4)
137
US$
CMF34GxxL MicroFil, 34 Gauge, 100 µm ID, 164 µm OD (pkg of 4)
137
US$
CMF35GxxL MicroFil, 35 Gauge, 75 µm ID, 144 µm OD (pkg of 4)
137
US$
CMF90UxxL MicroFil, approx. 36 Gauge, 20 µm ID, 90 µm OD (pkg of 4)
137
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
190
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Glass, Holders & Electrodes
Sharp Electrode Glass Capillaries
Fire-Polished Single-Barrel Standard-wall and Thin-wall glass Tubing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192
WPI’s Fire-polished glass capillaries are perfect for recording electrodes. The fire-polished ends eliminate
possible damage to the chloridized (Ag/AgCl) wire and microelectrode holder, and also facilitate smoother
insertion into a microelectrode holder.
Single-Barrel Standard Wall Capillaries (with or without inner filament). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192
WPI’s standard wall capillaries are easier to pull longer and smaller tip micropipettes. These are particularly
suitable for intracellular microelectrodes. The inner filament greatly facilitates pipette filling with electrolyte.
Single-Barrel Thin Wall Capillaries (with or without inner filament). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192
Thin wall capillaries produce smaller OD and bigger ID pipettes that are suitable for microinjection
GLASS, HOLDERS
Patch Clamp Glass Capillaries
Best for patch clamp studies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193
Multi-Barrel Glass Capillaries
Multi-Barrel Standard wall tubing (with inner filament). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194
Designed for microiontophoresis
Septum Theta Capillaries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194
Ideal for making dual-channel micropipettes used for intracellular work in small cells
Piggyback Glass Capillaries (with filament). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194
Ideal for making two-barrel electrodes with a significant tip diameter differential
Borosilicate Glass Rod. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194
Suitable for making rod pipettes to be used as tools to dissect chromosomes or to probe and move objects
Five- and Seven-Barrel Micropipette Blanks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195
Designed for precise local application of chemicals in extracellular electrophysiological studies
µTip Pre-Pulled Glass Capillaries
Borosilicate Glass Micropipettes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196
Plain, luer and silanized µTips
& ELECTRODES
Microfil, Micropipette Holders and Accessories
MicroFil Nonmetallic Syringe Needles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197
For filling micropipettes
Micropipette Storage Jar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195
For 1.0mm, 1.2mm, 1.5mm and 2.0mm OD glass pipettes
PolyFil Multi-Barrel Micropipettes Coupling Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197
For easy and secure coupling of a multi-barrel micropipette to a pressure source
Micropipette Holders & Half-Cells . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198
For coupling fluid-filled glass micropipettes to high input impedance amplifiers
Optical Quality Glass Bottom Sterile Cell Culture Dishes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233
For microinjection, fluorescence, high resolution image analysis, cell culture, electrophysiology
Microelectrodes
Metal Microelectrodes For extracellular recording. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Dri-Ref™ Reference Electrodes featuring extremely low electrolyte leakage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
CALBUF Calcium Calibration Solutions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
BetterSkin™ Electrodes Reusable surface-mounted electrodes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202
Disposable Ag/AgCl Snap Electrodes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202
GEL100 Conductive Electrode Gel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202
Ag/AgCl Half-Cells. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
191
Sharp Electrode Glass
Capillaries
GLASS, HOLDERS
& ELECTRODES
Clean, high quality glass for making
micropipette elec­trodes and other research
implements
WPI offers a wide spectrum of high-quality glass
capillaries. We take pride in our abil­i­ty to ship
your glass order within 48 hours. If you need a
special glass that does not ap­pear in our catalog,
please call us. We will make every effort to
provide it for you.
Fire-Polished glass
capillaries are easier to insert into
microelectrode holders without
damaging the gasket. More
importantly, fire-polished glass
won’t scratch the chloridized wire
used in a recording electrode.
Fire-polishing does not affect the
glass’s mechanical or electrical
properties.
Borosilicate glass capillaries: Close
di­men­sion­al tol­er­anc­es assure mi­cro­elec­trode
uni­for­mi­ty and reproducibility. Available in one-,
two-, three-, five- and seven-barrel con­fig­u­ra­tions;
a complete range of single bar­rel thin-wall siz­es;
and a variety of special con­fig­u­ra­tions. Cap­il­lar­ies
with filaments con­tain a solid fil­a­ment fused to
the inner wall, which speeds filling of electrodes.
Cap­il­lar­ies with or with­out inner filaments are
available for making microelectrodes in a wide
range of diameters .
Thin Wall single barrel capillaries are of­fered
both with or without inner filaments. The con­cen­
tric­i­ty of this material provides ex­cel­lent strength.
Micropipettes made from thin wall capillaries have
fine tips with a short taper.
Note: Because electrode tips erode
when left filled with saline solutions
for long peri­ods, electrodes should
be made and filled im­me­di­ate­ly
prior to use.
Standard,
with Filament
Thin Wall,
no Fil­a­ment
Thin Wall,
with Filament
Single-Barrel Standard Borosilicate Glass Tubing
Length
OD
(mm)
ID
(mm)
3 in. (76 mm)
3 in. (76 mm)
3 in. (76 mm)
3 in. (76 mm)
3 in. (76 mm)
3 in. (76 mm)
4 in. (100 mm)
4 in. (100 mm)
4 in. (100 mm)
4 in. (100 mm)
4 in. (100 mm)
4 in. (100 mm)
4 in. (100 mm)
4 in. (100 mm)
6 in. (152 mm)
6 in. (152 mm)
6 in. (152 mm)
6 in. (152 mm)
6 in. (152 mm)
6 in. (152 mm)
6 in. (152 mm)
6 in. (152 mm)
1.0
1.0
1.2
1.2
1.5
1.5
1.0
1.0
1.2
1.2
1.5
1.5
2.0
2.0
1.0
1.0
1.2
1.2
1.5
1.5
2.0
2.0
0.58
0.58
0.68
0.68
0.84
0.84
0.58
0.58
0.68
0.68
0.84
0.84
1.12
1.12
0.58
0.58
0.68
0.68
0.84
0.84
1.12
1.12
Filament
FirePolished
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
Quantity
Item
500
500
350
350
225
300
500
500
400
350
300
300
125
200
500
500
350
350
225
225
125
125
1B100F-3
1B100-3
1B120F-3
1B120-3
1B150F-3
1B150-3
1B100F-4
1B100-4
1B120F-4
1B120-4
1B150F-4
1B150-4
1B200F-4
1B200-4
1B100F-6
1B100-6
1B120F-6
1B120-6
1B150F-6
1B150-6
1B200F-6
1B200-6
Price
54
54
US$
54
US$
54
US$
54
US$
54
US$
59
US$
59
US$
59
US$
59
US$
59
US$
59
US$
59
US$
59
US$
71
US$
71
US$
71
US$
71
US$
71
US$
71
US$
71
US$
71
US$
US$
Thin-Wall Single-Barrel Standard Borosilicate
(Schott Duran) Glass Tubing
Single Barrel standard wall thickness cap­
il­lar­ies are offered either with or without in­ner
fil­a­ments for quick filling in a variety of lengths
and diameters. Two usable elec­trodes can be
made from one 6-inch length. ­Borosilicate glass is
either Corning 7740 or N51A, depending on the
part number. Contact WPI Technical Support for
specifications for your part number.
Standard,
no Filament
OD
(mm)
ID
(mm)
1.0
1.0
1.2
1.2
1.5
1.5
1.0
1.0
1.2
1.2
1.5
1.5
1.0
1.0
1.2
1.2
1.5
1.5
0.75
0.75
0.90
0.90
1.12
1.12
0.75
0.75
0.90
0.90
1.12
1.12
0.75
0.75
0.90
0.90
1.12
1.12
FIL
FirePolished
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
Length
Quantity
Item
3 in. (76 mm)
3 in. (76 mm)
3 in. (76 mm)
3 in. (76 mm)
3 in. (76 mm)
3 in. (76 mm)
4 in. (100 mm)
4 in. (100 mm)
4 in. (100 mm)
4 in. (100 mm)
4 in. (100 mm)
4 in. (100 mm)
6 in. (152 mm)
6 in. (152 mm)
6 in. (152 mm)
6 in. (152 mm)
6 in. (152 mm)
6 in. (152 mm)
500
500
400
350
225
300
500
500
350
350
225
300
500
500
400
350
225
300
TW100F-3
TW100-3
TW120F-3
TW120-3
TW150F-3
TW150-3
TW100F-4
TW100-4
TW120F-4
TW120-4
TW150F-4
TW150-4
TW100F-6
TW100-6
TW120F-6
TW120-6
TW150F-6
TW150-6
Price
56
56
US$
56
US$
56
US$
56
US$
56
US$
59
US$
59
US$
59
US$
59
US$
59
US$
59
US$
71
US$
71
US$
71
US$
71
US$
71
US$
71
US$
US$
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
192
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Patch Clamp Capillary Glass
To select the best patch clamp glass for your exper­
i­ments, we have evaluated available glass types
in terms of the four properties most crucial to
successful patch clamp studies:
WPI offers capillary tubing made from two glass
types widely used in constructing patch clamp
electrodes. The significant characteristics of each
are as follows:
The softening temperature determines how easily
each glass type can be pulled to the de­sired shape
and the extent to which it can be heat polished.
Glass with a high softening temperature is difficult
to pull and causes unnecessary wear on the heating
element of the puller. This makes it very hard
to make electrodes that are re­pro­duc­ible and of
consistent quality. Patch clamp glass with a low
softening tem­per­a­ture is preferred; however, higher
softening temperature glass is stronger.
PG52151-4, PG52152-4 and PG52165-4 are
prepared from Schott #8250 glass (equivalent to
Corn­ing #7052), one of the most widely used patch
clamp­ing glasses. This is a specially formulated
boro­sil­i­cate glass with a softening temperature
that is 110°C lower than regular borosilicate glass
(Corn­ing 7740, or Pyrex). It has excellent sealing
prop­er­ties for most cells. Electrical properties are
also very good.
Sealability: It is not clear what factors de­ter­mine
the sealing ability of the patch to the glass. Al­most
any glass can form a gigohm seal under the right
conditions. Different glass types vary, how­ev­er, in
how easily they form a seal. It is im­por­tant to select
a patch clamp glass that seals eas­i­ly. Good fire
polish is critical for seal (see DMF1000).
Leachable components: Substances leached from
glass can alter channel behavior. Since dif­fer­ent
channels are sen­si­tive to different glass com­po­
nents, it is best to record one type of chan­nel with
several different kinds of pipette glass to elim­i­nate
any artifact due to the glass.
PG10150-4 and PG10165-4 are composed of
Corning #0010 glass, a high lead content (22%
PbO) glass. Its thermal and elec­tri­cal per­for­mance
is between the Schott #8250 and Corning #8161
glass­es described above. It is much more eco­nom­
i­cal than Corning #8161 glass. It has been found
that this glass causes much less alteration in
chan­nel behavior than Corning #8161 and Schott
#8250 glass (Furman and Tanaka, Biophys. J. 53,
p287, 1988).
Patch clamp capillaries do not have mi­crofil­a­ments.
PATCH CLAMP CAPILLARY GLASS
Catalog#
PG52151-4
PG52165-4
PG10150-4
PG10165-4
Glass Type
OD/ID (mm)
#8250
#8250
#0010
#0010
1.5/1.0
1.65/1.1
1.5/0.75
1.65/1.1
Dielectric
Constant
4.9
4.9
6.7
6.7
Softening
Point °C
720°
720°
625°
625°
Quantity
100
100
100
100
Price
56
56
US$
56
US$
56
US$
US$
GLASS, HOLDERS
Electrical properties determine how much noise
the glass is likely to produce in recording sit­u­a­
tions. The lower the product of dielectric con­stant
times the loss factor, the smaller the equiv­a­lent
noise current the glass will produce (Rae and Levis,
Methods in En­zy­mol­o­gy, 207, p67, 1992). Patch
clamp glass with good elec­tri­cal properties is critical
especially in single-chan­nel recording.
Glass Handling Forceps
& ELECTRODES
Ever had difficulty picking up a glass capillary? Special tips on these forceps solve
the problem, holding glass firmly without risk of breakage. They also keep the glass
clean and avoid contamination from skin oils.
77020
Glass Handling Forceps
47
US$
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
193
Multi-Barrel Glass Capillaries
GLASS, HOLDERS
& ELECTRODES
Two-Barrel
Three-Barrel
Multi-barrel configurations are designed
es­pe­cial­ly for microiontophoresis.
Because the capillaries are fused together
during man­u­fac­ture, you will not need to
twist them while pulling to seal the tips
together. An inner fil­a­ment in each barrel
makes filling easy and fast.
Also see PolyFil for a novel
way to connect multi-barrel
pipettes
Five-Barrel
Seven-Barrel
Multi-Barrel Borosilicate Glass Tubing with Filaments
Length
Description
OD/ID (mm)
Filament
Quantity
Item
Price
4 in. (102 mm)
4 in. (102 mm)
4 in. (102 mm)
4 in. (102 mm)
4 in. (102 mm)
6 in. (152 mm)
6 in. (152 mm)
6 in. (152 mm)
6 in. (152 mm)
Two-Barrel
Three-Barrel
Five-Barrel
Seven-Barrel
Seven-Barrel
Two-Barrel
Three-Barrel
Five-Barrel
Seven-Barrel
1.5/0.84
1.2/0.68
1.2/0.68
1.2/0.58
1.2/0.68
1.5/0.84
1.2/0.68
1.2/0.68
1.0/0.58
4
4
4
4
4
4
4
4
4
100
100
65
60
75
100
100
65
60
2B150F-4
3B120F-4
5B120F-4
7B100F-4
7B120F-4
2B150F-6
3B120F-6
5B120F-6
7B100F-6
65
65
US$
65
US$
90
US$
90
US$
77
US$
77
US$
74
US$
90
US$
US$
Special Configuration
Borosilicate Capillaries
Septum Theta offers superior cell impalement. The nat­u­ral
bevel resulting from the prominent spear-like pro­jec­tion of
the septum gives microelectrodes a sharp, spear-point tip.
This style has low resistance for use as a single mi­cro­elec­
trode, and it can be used to make superior dou­ble-tipped
microelectrodes with low trans-tip coupling. The nat­u­ral bevel
of Septum Theta also sig­nif­i­cant­ly increases the effective tip
cross-section. As supplied, the width of the sep­tum is ap­prox­i­
mate­ly 0.2 mm; wall thick­ness is ap­prox­i­mate­ly 0.2 mm.
Piggyback glass consists of a pair of boro­
sil­i­cate capillaries fused together during
man­u­fac­ture. One barrel is larger than the
other, and both have inner filaments for
quick filling. Pig­gy­back glass makes it simple
to fab­ri­cate two-barrel elec­trodes with a
significant tip diameter differential.
Septum Theta
Special Configuration Borosilicate Glass Tubing
Description
OD/ID (mm)
Length
Quantity
Item
Septum Theta
1.5/1.02
1.51/0.84
0.75/0.35
1.51/0.84
0.75/0.35
6 in. (152 mm)
100
TST150-6
US$
4 in. (102 mm)
50
PB150F-4
US$
6 in. (152 mm)
50
PB150F-6
US$
Piggyback
Piggyback
Borosilicate glass rod
1.0 mm diameter — for
making tools, probes, tips
Piggyback
Price
90
65
96
Borosilicate Glass Rod
Description
OD (mm)
Length
Quantity
Item
Glass Rod
Glass Rod
1.0
1.0
4 in. (102 mm)
6 in. (152 mm)
500
500
GR100-4
GR100-6
Price
55
61
US$
US$
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
194
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Five-and Seven-Barrel Micropipette Blanks
High quality multi-barrel micropipette blanks for pressure injection
P-5 and P-7 pipette blanks exhibit levels of quality and reproducibility impossible to match in hand­made pipettes. They are
compatible with most vertical pipette pullers that accommodate
3.00 mm diameter glass. P-5 and P-7 blanks have a solid ball
pulling tip and are fabricated from 3.00 mm Kwik-Fil tubing. All
barrels except the large central one have filaments.
The P-5 and P-7 mi­cropi­pettes are designed for precise local ap­pli­ca­tion
of chem­i­cals in ex­tra­cel­lu­lar elec­tro­phys­i­o­log­i­cal studies. Drug ap­pli­ca­tion
may be by one of two meth­ods:
1. microiontophoretic ejec­tion of charged sub­stanc­es, or
2. pressure ejection.
m
2m
1 ")
(3 ⁄4
8
P-5-50
P-5-10
P-7-10
PI-305A
MBMPH5-7
5-Barrel Micropipette Blank (pkg of 50)
5-Barrel Micropipette Blank (pkg of 10)
7-Barrel Micropipette Blank (pkg of 10)
Pressure Ejection Kit (1 kit)
Holder for P-5 & P-7 Pipettes
510
150
US$
234
US$
114
US$59
US$
US$
PI-305A Pressure Ejection Kit
contains 20 plas­tic fittings, an
in­sertion tool, five 5-ft lengths
of col­ored tubing, a five-valve
manifold cou­pling, six male luer
adapt­ers and one male/female
luered line. These Pressure Ejection
fit­tings con­nect the pres­sure
ejection tub­ing to the P-5 and P-7
pipette bar­rels quick­ly and se­cure­ly.
Stores up to 30 micropipettes, filled or
unfilled, up to three inches in length. A gentle sliding action inserts or removes pipettes
without damage to the delicate tips.
E210
E212
E215
E220
Storage
Storage
Storage
Storage
Jar
Jar
Jar
Jar
for
for
for
for
1.0 mm OD Mi­cropi­pettes
1.2 mm OD Mi­cropi­pettes
1.5 mm OD Mi­cropi­pettes
2.0 mm OD Mi­cropi­pettes
Replacement Parts
1965 Foam Ring for 0.75 - 1.0 mm glass
1966 Foam Ring for 1.2 - 1.5 mm glass
1967 Foam Ring for 2.0 mm glass
47
47
US$
47
US$
47
US$
US$
18
18
US$
18
US$
US$
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
195
& ELECTRODES
Micropipette
Storage Jar
GLASS, HOLDERS
See PMP-107 Programmable
Multipipette Puller, Page 216.
TM
Borosilicate glass micropipettes
& ELECTRODES
Plain Shank or
Luer Fittings
Eliminate the cost and trouble of making
your own micropipettes — WPI can
quickly supply your need for consistently
sized pre-pulled glass micropipettes for
injection of dyes or proteins into cells,
oocytes and for many other biomedical
laboratory applications. Tip diameters (ID)
range from 0.1 to 10 micrometers.
Shank
Length
Glass O.D.
Filament
Fire
Polished
Catalog #
PLAIN
0.1 µm
0.2 µm
0.3 µm
0.4 µm
0.5 µm
1 µm
2 µm
5 µm
10 µm
10 µm
30 µm
—
—
—
—
—
—
—
—
—
—
—
1.0 mm Thin-Wall
1.0 mm Thin-Wall
1.0 mm Thin-Wall
1.0 mm Thin-Wall
1.0 mm Thin-Wall
1.0 mm Thin-Wall
1.0 mm Thin-Wall
1.0 mm Thin-Wall
1.0 mm Thin-Wall
1.14 mm A203XV glass *
1.0 mm Thin-Wall
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
No
No
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
TIP01TW1F
TIP02TW1F
TIP03TW1F
TIP04TW1F
TIP05TW1F
TIP1TW1
TIP2TW1
TIP5TW1
TIP10TW1
TIP10XV119
TIP30TW1
LUER
0.1 µm
0.2 µm
0.3 µm
0.4 µm
0.5 µm
1 µm
2 µm
5 µm
10 µm
30 µm
—
—
—
—
—
—
—
—
—
—
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
Thin-Wall
Thin-Wall
Thin-Wall
Thin-Wall
Thin-Wall
Thin-Wall
Thin-Wall
Thin-Wall
Thin-Wall
Thin-Wall
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
—
—
—
—
—
—
—
—
—
—
TIP01TW1F-L
TIP02TW1F-L
TIP03TW1F-L
TIP04TW1F-L
TIP05TW1F-L
TIP1TW1-L
TIP2TW1-L
TIP5TW1-L
TIP10TW1-L
TIP30TW1-L
US$
inch
inch
inch
inch
inch
inch
1.0
1.0
1.0
1.0
1.0
1.0
mm
mm
mm
mm
mm
mm
Thin-Wall
Thin-Wall
Thin-Wall
Thin-Wall
Thin-Wall
Thin-Wall
No
No
No
No
No
No
—
—
—
—
—
—
TIP5TW1LS01
TIP5TW1LS02
TIP10TW1LS01
TIP10TW1LS02
TIP30TW1LS01
TIP30TW1LS02
US$
● Schott Duran borosilicate glass
● 0.5 micrometer and smaller ID
micropipettes include an internal glass
fiber for easy filling
LUER/SILANIZED
● Tip inner diameter tolerance ±20%
Price
Tip
I.D.
Shank
● Short taper yields high strength
● Nominal length ≈ 50 mm
● OD:ID = 1.33:1
● Standard capillary outer diameters are
1.0 mm (thin-wall) or 1.14 mm
5 µm
5 µm
10 µm
10 µm
30 µm
30 µm
1
2
1
2
1
2
(pack
of 10)
US$
143
US$
143
US$
143
US$
143
US$
143
US$
143
US$
143
US$
143
US$
143
US$
155
US$
143
143
143
US$
143
US$
143
US$
143
US$
143
US$
143
US$
143
US$
143
US$
143
US$
143
143
US$
143
US$
143
US$
143
US$
143
US$
* 10 µ (ID), 1.14 mm capillary pipettes are for use in WPI’s Nanoliter 2000.
● Every pipette individually tested and
inspected
● Vacuum packed
GLASS, HOLDERS
Silanized Tips (Luer Shank)
Silanization waterproofs the glass to retard water
when inserting into cell. This will not let the outside fluid run down the pipette and get inside so
easily.
Micro Cannula
l 0.4mm O.D., 0.2mm I.D. tubing
l Autoclavable
l Biocompatible Perfluorocarbon tubing material
KZ1101
Micro Cannula, 3-inch
96
US$
µTip Sampler Assortments
TIPMIX01-05 Two each, 0.1, 0.2, 0.3, 0.4, 0.5 µm ID, plain shank
TIPMIX05-10 Two each, 0.5, 1, 2, 5, 10 µm ID, plain shank
TIPMIX01-05-L Two each, 0.1, 0.2, 0.3, 0.4, 0.5 µm ID, Luer
TIPMIX05-10-L Two each, 0.5, 1, 2, 5, 10 µm ID, Luer
143
143
US$
143
US$
143
US$
US$
This micro cannula is ideal for
placement in the carotid or femoral
artery of mice, rats, and other small
animal blood vessels. It can be used with a
pressure transducer (WPI’S BLPR2) for blood
pressure measurement, or in conjunction with a
micro-syringe injection system (like WPI’s UMPIII or
MMP pumps). The incorporated standard female luer fitting
makes connecting to existing experimental plumbing quick
and easy. The cannula is provided with a contoured-tip stainless
steel stylet (trocar) to facilitate placement using established techniques.
A movable “shoulder” ring provides a tie-in point to prevent accidental
removal. The cannula may be left in place for 2 hours or more, and with proper
care and cleaning, may be re-used multiple times. Instructions for use included.
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
196
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
MicroFil™
WPI’s MicroFil™ fills micropipettes easily and reli­
ably. Its long and fine tip allows you to start the
filling very close to the pi­pette tip, elim­i­nat­ing
both air bub­ble for­ma­tion and clog­ging due to
the wash­ing down of dust particles. The trans­par­
ent amber MicroFil needle is con­struct­ed from
a com­bi­na­tion of plastic and fused silica — no
met­al com­po­nents are used. The MicroFil needle
can be stored for days with the filling solution
inside without clogging.
1-5 pkgs
US$
59
US$
59
US$
59
6-10 pkgs
US$
49
US$
49
US$
49
Custom MicroFil
Nonmetallic
syringe needle for
filling micropipettes
PolyFil
All MicroFil products, including custom orders, can be shipped immediately. Custom orders for special
needs can be made using nine sizes of MicroFil tubing in lengths up to 50 cm — except for CMF90UxxL
which has a maximum length of 10 cm because of its high resistance to flow. Quantity discounts
available. Specify length when or­der­ing by in­sert­ing the length (in centimeter in­cre­ments) into the
catalog number in place of the XX’s.
US$
143
CMF20GxxL MicroFil, 20 Gauge, 700 µm ID, 850 µm OD (pkg of 4)
US$
CMF22GxxL MicroFil, 22 Gauge, 530 µm ID, 700 µm OD (pkg of 4)
143
US$
CMF23GxxL MicroFil, 23 Gauge, 530 µm ID, 665 µm OD (pkg of 4)
143
US$
CMF26GxxL MicroFil, 26 Gauge, 320 µm ID, 430 µm OD (pkg of 4)
143
US$
CMF28GxxL MicroFil, 28 Gauge, 250 µm ID, 350 µm OD (pkg of 4)
143
US$
CMF31GxxL MicroFil, 31 Gauge, 100 µm ID, 238 µm OD (pkg of 4)
143
US$
CMF34GxxL MicroFil, 34 Gauge, 100 µm ID, 164 µm OD (pkg of 4)
143
US$
CMF35GxxL MicroFil, 35 Gauge, 75 µm ID, 144 µm OD (pkg of 4)
143
US$
CMF90UxxL MicroFil, approx. 36 Gauge, 20 µm ID, 90 µm OD (pkg of 4)
143
™
GLASS, HOLDERS
U.S. PATENT 5,294,325
MF34G-5
MicroFil, 34 ga., 67 mm long (pkg of 5)
MF28G-5
MicroFil, 28 ga., 97 mm long (pkg of 5)
MF28G67-5 MicroFil, 28 ga., 67 mm long (pkg of 5)
The MicroFil’s tip elas­tic­i­ty is sturdy and very
flexible though not un­break­able. Since it is more
flex­i­ble than stainless steel nee­dles, moderate
bending will not block or dam­age the MicroFil
needle. The com­bi­na­tion of plas­tic and fused
silica in the MicroFil tip is sturdier than plastic
tips, allowing easy and repeated in­ser­tions into
mi­cropi­pettes. MicroFil’s luer fitting allows easy
coupling to syringes and syringe filters.
Multi-barrel
micropipette
coupling kit
A drop of hot glue
provides a secure,
leak-free seal.
PolyFil allows easy and secure coupling of a multi-barrel micropipette to
a pres­sure source. Cou­pling is achieved by bonding tem­per­a­ture-re­sis­tant
and flexible MicroFil to the capillary tube with hot melt ad­he­sive. The
luer end of each MicroFil is connected to PVC tubing (200 PSI rated). Kits
also include a five-port manifold that allows use of a sin­gle PV800 Series
PicoPump to drive up to six mi­cropi­pette barrels in­de­pen­dent­ly by switch­
ing on only the barrels to be in­ject­ed. All con­nec­tions are locking luers
— pres­sure safe and convenient.
Pipette pulled from
multi-barrel glass capillary
Kit in­cludes: 1 pi­pette holder/han­dle, plastic; 7 pieces MF28G MicroFil;
7‑piec­es tubing with male luer lock fittings; 1 flow-thru man­i­fold with five
luer lock ports; 1 hot melt glue gun(110V only); 3 glue sticks.
5440
13316
Poly­Fil Multi-Barrel Mi­cropi­pette Coupling Kit
Mini Glue Gun and (3) glue sticks 210
20
US$
US$
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
197
& ELECTRODES
MicroFil™
inserted into
each barrel
Micropipette Holders & Half-Cells
WPI’s microelectrode holder-half-cells couple fluid-filled glass
micropipettes to high input impedance amplifiers. A Ag/AgCl pellet (or
a silver wire) molded into the holder body provides stable potential.
Electrical connection is made via male 2 mm pins or female 2 mm
sockets. The pipette may be mounted axially or at right angles to the
holder. Pipettes are held with screw-caps or rubber gaskets (without
caps). Filling WPI microelectrode holders with electrolytes containing
chloride results in stable electrode potential. Suitable electrolytes
include KCl, NaCl and CaCl2. Holders are supplied for standard WPI
single capillary tubing of 1.0, 1.2, 1.5 and 2.0 mm outside diameters.
(Call WPI regarding custom designs for other glass diameters.) The
holder style you select will depend on your experimental application,
space, and instrumentation.
35.7 mm
35.7 mm
2 mm Pin
to Ag Wire
2 mm Pin
to Ag/AgCl Pellet
9.5 mm DIA.
9.5 mm DIA.
APEH1
APEH2
35.
GLASS, HOLDERS
& ELECTRODES
Hints for selecting and ordering micropipette holders
1. Determine the required electrical connection on the holder: for
example, if you wish to connect the holder to a 2 mm pin you should
select a holder equipped with a 2 mm jack. Most WPI probes require a
holder equipped with a 2 mm jack.
25.4 mm
34.9 mm
9.5 mm DIA.
25.4 mm
9.5 mm DIA.
2. Decide on the required alignment of the electrical connection:
either in-line with the glass pipette, or at a right angle to it. Space
considerations in your experimental setup and requirements imposed
by other pieces of equipment typically determine which alignment is
appropriate.
O-Ring
O-Ring
2 mm Jack to Ag Wire
2 mm Pin
to Ag Wire
EHB1
EHBF
3. Determine if you want to hold the glass pipette by a rubber gasket
(e.g., MEH1S) or a screw-cap (e.g., MEH3S). Rubber gaskets offer easier
insertion and removal of glass pipettes whereas screw-caps provide
more secure mounts for micropipetters.
4. Choose a holder with either a silver wire or a silver/silver chloride
pellet for the metal/liquid coupling. Silver/silver chloride pellets provide
a more stable low-noise baseline which is important for low-noise DC
recording. Pellets require the glass pipette and holder to be free of air
bubbles to achieve a good connection. Silver wire holders are durable
and are easier to use when the holder is equipped with a pressure port
because the fluid in the pipette does not have to be filled to the top of
the pipette to achieve a good electrical connection
5. Choose a holder equipped with a pressure port only when you
want to pressure inject liquid from the pipette. Two types of ports are
available: 2.0 mm O.D. and standard “syringe-style” luer. The luer port
is often recommended because it makes assembly and disassembly
much easier. Quick-connect luer fittings for four common sizes of
tubing (1/16", 3/32", 1/8", 5/32" I.D.) are included with each luer-equipped
holder.
2.500
∅1.2 mm
∅1.2 mm
MEH6RF/SF is designed primarily for use with the Model 900A
Micropressure System; EHB1 for use in electrode beveling; and
MEH3SW for microtitration of chloride with a silver wire as the
electrode and a solution of silver nitrate filling the holder. MPH models
do not contain Ag/AgCl half-cells and are used for pressure injection
of substances through microelectrodes. PicoNozzle, used for pressure
injection with PV800 Series PicoPumps, includes an MPH6S holder
— which may also be used to couple a micropipette to a syringe. APEH
models are also designed for use in pressurized injection procedures.
MALE “LUER” PORT
∅1.5 mm
∅0.250
∅0.250
∅1.5 mm
FOIMPH
Holder for P-5 and P-7
multibarrel glass (see
al
page 81)
ion
t
Op ndle
a
H
126 mm
FOIMPH-LF
9.5 mm
6.3 mm DIA.
20.7 mm
30 mm
6. Some non-WPI preamplifiers or headstages cannot be mounted
on micromanipulators. In such cases, a holder equipped with a rod
(e.g., MEH8) permits the holder to be conveniently mounted on a
micromanipulator.
7. Finally, remember to specify the O.D. of the glass you will be using
when you place your order.
2.500
2 mm Pin
to Ag/AgCl Pellet
Female “Luer” Port
for 3 mm OD glass
9.5 mm DIA.
20.7 mm
MBMPH5-7
6.3 mm DIA.
45°
MEH145
20.7 mm
Gasket
2 mm Pin
to Ag/AgCl Pellet
2 mm Jack
to Ag/AgCl Pellet
45°
MEH1F45
4.7 mm DIA.
MEH1R
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
198
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
MICROELECTRODE HOLDERS
Pressure
Port Screw
Cap
APEH1 APEH2 EHB1 EHBF FOIMPH
FOIMPH-LF
MBMPH5-7
MEH145 MEH1F45 MEH1R MEH1RF MEH1S MEH1SF MEH2R MEH2RF MEH2RFW MEH2RW MEH2S MEH2SF MEH2SFW MEH2SW MEH345 MEH3F45 MEH3FW45 MEH3R MEH3RF MEH3RFW MEH3RW MEH3S MEH3SB MEH3SBW MEH3SF MEH3SFW MEH3SW
MEH3W45 MEH6RF MEH6RFW MEH6SF MEH6SFW MEH7 MEH7W MEH8 MEH900R MEH900S MPH1 MPH3 MPH4 MPH6P
MPH6R MPH6S Right
Right
Straight
Straight
Straight
Straight
----
45°
45°
Right
Right
Straight
Straight
Right
Right
Right
Right
Straight
Straight
Straight
Straight
45°
45°
45°
Right
Right
Right
Right
Straight
Straight
Straight
Straight
Straight
Straight
45°
Right
Right
Straight
Straight
Right
Right
Right
Right
Straight
—
—
—
Right
Right
—
No Port
No Port
No Port
No Port
No Port
Male Luer
Female Luer
No Port
No Port
No Port
No Port
No Port
No Port
Male Luer
Male Luer
Male Luer
Male Luer
Male Luer
Male Luer
Male Luer
Male Luer
No Port
No Port
Port
No Port
No Port
No Port
No Port
No Port
No Port
No Port
No Port
No Port
No Port
No Port
2.0-mm Port
2.0-mm Port
2.0-mm Port
2.0-mm Port
2.0-mm Port
2.0-mm Port
No Port
2.0-mm Port
2.0-mm Port
Female Luer
Male Luer
2.0-mm Port
Female Luer
Female Luer
Female Luer
2 Caps
2 Caps
N/A MBS, 48000
N/A MBS, 48000
w/Cap MBS, 48000
w/Cap MBS, 48000
w/Cap
No Cap
No Cap 705, 773, 767, 721, FD223
No Cap
No Cap 705, 773, 767, 721, FD223
No Cap
No Cap 705, 773, 767, 721, FD223
w/Cap
w/Cap 705, 773, 767, 721, FD223
w/Cap 705, 773, 767, 721, FD223
w/Cap
w/Cap
w/Cap 705, 773, 767, 721, FD223
w/Cap 705, 773, 767, 721, FD223
w/Cap
w/Cap
w/Cap 705, 773, 767, 721, FD223
w/Cap
w/Cap
w/Cap 705, 773, 767, 721, FD223
w/Cap 705, 773, 767, 721, FD223
w/Cap
w/Cap
w/Cap ISO-80, ISO-DAM8A
w/Cap ISO-80, ISO-DAM8A
w/Cap 705, 773, 767, 721, FD223
w/Cap 705, 773, 767, 721, FD223
w/Cap
w/Cap 705, 773, 767, 721, FD223
w/Cap 705, 773, 767, 721, FD223
w/Cap 705, 773, 767, 721, FD223
w/Cap 705, 773, 767, 721, FD223
w/Cap 705, 773, 767, 721, FD223
w/Cap
w/Cap
w/Cap
w/Cap 900A
w/Cap 900A
w/Cap
w/Cap
w/Cap
w/Cap Piconozzle Kit (5430-XX)
w/Cap Piconozzle Kit (5430-XX)
w/Cap Piconozzle Kit (5430-XX)
Male
Male
Male
Female
Fiber Optic
Fiber Optic
None
Male
Female
Male
Female
Male
Female
Male
Female
Female
Male
Male
Female
Female
Male
Male
Female
Female
Male
Female
Female
Male
Male
Banana
Banana
Female
Female
Male
Male
Female
Female
Female
Female
Male
Male
Male
Male
Male
None
None
None
Male
Male
None
Pellet
Wire
Wire
Wire
None
None
None
Pellet
Pellet
Pellet
Pellet
Pellet
Pellet
Pellet
Pellet
Wire
Wire
Pellet
Pellet
Wire
Wire
Pellet
Pellet
Wire
Pellet
Pellet
Wire
Wire
Pellet
Pellet
Wire
Pellet
Wire
Wire
Wire
Pellet
Wire
Pellet
Wire
Pellet
Wire
Pellet
Pellet
Pellet
None
None
None
Pellet
Wire
None
Designed for
WPI Products
Price
59
59
US$
59
US$
59
US$
59
US$
59
US$
59
US$
59
US$
59
US$
59
US$
59
US$
59
US$
59
US$
59
US$
59
US$
59
US$
59
US$
59
US$
59
US$
59
US$
59
US$
59
US$
59
US$
59
US$
59
US$
59
US$
59
US$
59
US$
59
US$
59
US$
59
US$
59
US$
59
US$
59
US$
59
US$
59
US$
59
US$
59
US$
59
US$
59
US$
59
US$
59
US$
59
US$
59
US$
59
US$
59
US$
59
US$
59
US$
59
US$
59
US$
US$
SPECIFY O.D. OF GLASS (‑1.0, 1.2, 1.5 OR 2.0 mm‑) WHEN ORDERING.
Handles and Accessories (not included)
Handle #2505 is for use with WPI manipulators. The smaller diameter handle #5444 is required for use with Narishige and Zeiss manipulators.
2505
5444
GO1-100
GO2-100
GO3-100
GO4-100
1571 (6.3 mm) diameter handle
(4.8 mm) diameter handle
Replacement gasket 1.0 mm, Package of 100
Replacement gasket 1.2 mm, Package of 100
Replacement gasket 1.5 mm, Package of 100
Replacement gasket 2.0 mm, Package of 100
Clear Silicone Rubber Sealant (‑4.7 oz‑)
17
34
US$
35
US$
35
US$
35
US$
35
US$
35
/4-in
US$
/16-in
US$
1
3
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
199
& ELECTRODES
Electric
Connection
Angle
Connector Half-Cell
GLASS, HOLDERS
33.5 mm
20.7 mm
23.9 mm
27.2 mm
23.9 mm
Gasket
Gasket
2 mm Jack
to Ag/AgCl Pellet
6.3 mm DIA.
2 mm Jack
to Ag/AgCl Pellet
2 mm Pin
to Ag/AgCl Pellet
MEH1RF
4.7 mm DIA.
4.7 mm DIA.
MEH1S
27.2 mm
27.2 mm
6.3 mm DIA.
MEH1SF
MEH2R
36.7 mm
27.2 mm
6.3 mm DIA.
2 mm Pin
to Ag/AgCl Pellet
Male
“Luer”
Port
27.2 mm
6.3 mm DIA.
& ELECTRODES
6.3 mm DIA.
2 mm Jack
to Ag/AgCl Pellet
Male “Luer” port
2 mm Jack
to Ag Wire
Male
“Luer”
Port
6.3 mm DIA.
2 mm Pin
to Ag/AgCl Pellet
MEH2RW
MEH2RFW
29 mm
Male
“Luer”
Port
2 mm Pin
to Ag Wire
6.3 mm DIA.
MEH2RF
29 mm
Male
“Luer”
Port
MEH2S
6.3 mm DIA.
27.2 mm
36.7 mm
27.2 mm
6.3 mm DIA.
2 mm Jack
to Ag/AgCl Pellet
6.3 mm DIA.
MEH2SF
6.3 mm DIA.
27.2 mm
GLASS, HOLDERS
Male “Luer” Port
Male
“Luer”
Port
2 mm Jack to Ag Wire
2 mm Pin
to Ag/AgCl Pellet
Male
“Luer”
Port
2 mm Pin to Ag Wire
45°
27.2 mm
27.2 mm
27.2 mm
MEH345
MEH2SW
MEH2SFW
6.3 mm DIA.
2 mm Jack
to Ag Wire
2 mm Jack
to Ag/AgCl Pellet
45°
45°
MEH3FW45
MEH3F45
27.2 mm
2 mm Pin
to Ag/AgCl Pellet
6.3 mm DIA.
MEH3R
27.2 mm
36.7 mm
2 mm Jack
to Ag/AgCl Pellet
6.3 mm DIA.
MEH3RF
35.2 mm
6.3 mm DIA.
27.2 mm
27.2 mm
6.3 mm DIA.
2 mm Pin
to Ag Wire
2 mm Jack
to Ag Wire
6.3 mm DIA.
MEH3RFW
6.3 mm DIA.
MEH3RW
2 mm Pin
to Ag/AgCl Pellet
MEH3S
Mini-Banana Plug
to Ag/AgCl Pellet
MEH3SB
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
200
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
29 mm
29 mm
35.2 mm
36.7 mm
27.2 mm
27.2 mm
6.3 mm DIA.
2 mm Jack
to Ag/AgCl Pellet
Mini-Banana Plug
to Ag Wire
MEH3SBW
27.2 mm
6.3 mm DIA.
6.3 mm DIA.
2 mm Jack
to Ag Wire
2 mm Pin to Ag Wire
6.3 mm DIA.
MEH3SFW
MEH3SF
29 mm
33.6 mm
29 mm
6.3 mm DIA.
29 mm
6.3 mm DIA.
6.3 mm DIA.
6.3 mm DIA.
2 mm Pin
to Ag Wire
2 mm Jack
to Ag/AgCl Pellet
45°
2 mm Jack
to Ag Wire
2 mm Jack
to Ag/AgCl Pellet
2.0 mm O.D. Port
2.0 mm O.D. Port
MEH6RF
MEH3W45
l
na
tio
Op ndle
Ha
29 mm
123.7 mm
6.3 mm DIA.
2.0 mm O.D. Port
33.6 mm
2 mm Pin
to Ag Wire
6.3 mm DIA.
MEH7
36.7 mm
6.3 mm DIA.
2.0 mm O.D. Port
2 mm Pin
to Ag/AgCl Pellet
6.3 mm DIA.
MEH8
l
na
tio e
Opandl
H
123.7 mm
27.2 mm
Female
“Luer”
Port
MEH900S
Male
“Luer”
Port
MPH1
9.5 mm DIA.
6.3 mm DIA.
42 mm
MPH3
42 mm
Optional
Handle
27.2 mm
MPH4
6.3 mm DIA.
MPH6P
Female
Locking “Luer”
Port
Female
Locking “Luer”
Port
Female
Locking “Luer”
Port
6.3mm DIA.
4.7mm DIA.
2 mm PIN
to Ag WIRE
2 mm PIN
to Ag WIRE
6.3 mm DIA.
6.3 mm DIA.
2.0 mm O.D. Port
42 mm
2.0 mm O.D.
Port
l
na
tio e
Opandl
H
30 mm
2 mm Pin
to Ag/AgCl Pellet
MEH900R
123.7 mm
2 mm Pin
to Ag/AgCl Pellet
MEH7W
126 mm
27.2 mm
29 mm
123.7 mm
6.3 mm DIA.
MPH6R
6.3 mm DIA.
MPH6S
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
201
& ELECTRODES
6.3 mm DIA.
l
na
tio e
Opandl
H
27.2 mm
2 mm Pin
to Ag/AgCl Pellet
MEH6SFW
l
na
tio e
Opandl
H
123.7 mm
2.0 mm O.D.
Port
2.0 mm O.D.
Port
2 mm Jack to Ag Wire
MEH6SF
MEH6RFW
27.2 mm
27.2 mm
2.0 mm O.D. Port
GLASS, HOLDERS
33.6 mm
MEH3SW
et
ockable!
s
DIN avail
now
GLASS, HOLDERS
& ELECTRODES
BetterSkin™ Electrodes
●
WPI’s unique Ag/AgCl pellet manufacturing process gives
increased mechanical strength for extra durability
●
Highly porous surface for low impendence, high current
passing capability and stable, low noise measurements
●
High flex cable comes in shielded and unshielded form
(Carbon fiber cable for NMR environment is available
upon request)
●
Strong epoxy house increases durability and makes
cleaning easy
●
Ultra-high purity material for low offset and drift
WPI's new BetterSkin™electrodes are high
quality Ag/AgCl reusable surface-mounted
electrodes designed to be used for the acquisition of all biopotentials. Each electrode is
fabricated using an optimum quality sintered
Ag/AgCl pellet encased within a strong epoxy
housing designed to have an extended lifetime.
The result is a superior electrode that provides
accurate and clear transmission of even the
smallest surface biopotentials. In comparison
to standard “stamped” metal electrodes and
Ag/AgCl disposable electrodes, WPI's BetterSkin
electrodes provide increased stability, lower
noise and lower offset voltage during surface
biopotential recording. These features are particularly important during measurement of very
small potential signals, such as EMG or EEG
recording.
electrodes (13-16 mm OD) are general purpose
electrodes and appropriate for most applications. The 19‑mm large size electrodes are
designed for optimal surface skin contact for
use during long-term biopotential recording.
Three different connector and cable combinations are offered: a 2‑mm pin with 1 meter
unshielded cable; a 2‑mm pin with 1 meter
Bulk discount orders are possible and tradeinquiries are also welcome.
Skin Electrodes with 2 mm Gel Capacity and 1 m Lead
OD
EL204
EL204S
EL204D
EL208
EL208WS
EL208D
EL208WD
EL212
Four BetterSkin electrode sizes are currently
offered: 7‑mm, 13‑mm, 16‑mm and 19‑mm
(OD). The 7‑mm electrodes are designed for
use where close spacing between biopotential
recording sites is required. The medium sized
7 mm
7 mm
7 mm
13 mm
16 mm
13 mm
16 mm
19 mm
Conductive Electrode Gel
A very high quality non-iritating con­duc­tive mul­ti­pur­pose
elec­trode gel for use with skin elec­trodes that are not pregelled. Ideal for use in EEG, ECG, and EMG applications.
Tube con­tains 8 oz. (250 g).
Shipping weight: 1 lb. (0.5 kg).
GEL100
shielded cable (shielding is connected to an
additional 2 mm grounding pin); and 1.5 mm
DIN safety socket with 1 meter unshielded
cable. All electrodes require adhesive disks
(e.g., WPI's ADD200 series) and recording gel
(GEL100).
Conductive Electrode Gel
Discs
Sensor Housing Pin
Ground
DIN Electrode Adhesive Disc
Shield
Disc
Price
Diam. Height Diam.
Pin Diam. Socket
Price
(pkg of 100)
ADD204
4 mm
5 mm
2 mm
—
—
—
ADD204
4 mm
5 mm
2 mm
Yes
2 mm
—
ADD204
4 mm
5 mm
—
—
—
1.5 mm
ADD208
8 mm
6 mm
2 mm
—
—
—
ADD208
8 mm
6 mm
2 mm
Yes
2 mm
—
ADD208
8 mm
6 mm
—
—
—
1.5 mm
ADD208
8 mm
6 mm
—
—
—
1.5 mm
ADD212
12 mm 7 mm
2 mm
—
—
—
Disposable Ag/AgCl Snap Electrodes
Disposable Ag-AgCl snap adhesive electrodes. Pre-gelled for simple peel
and stick application. An ideal resting ECG electrode. Size: 0.875 x 1.75
inches. (Electrode lead available separately.)
Ag/AgCl PROBES & Ag/AgCl SNAP ELECTRODES
EL203
Disposable Snap Electrodes (package of 30)
500131
Snap Cable, 1m, 2mm pin (package of 5)
500330
Snap Cable, 7-lead, DIN (1.5 mm pin)
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
202
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Ag/AgCl Half-Cells
EP05
New, improved sintered pellets with lower resistance and high strength.
Stable and well balanced in the presence of current, these small and inexpensive half-cells are easy to work with as bath electrodes.
EP08
0.5 mm dia.
2 cm long
0.8 mm dia.
2 cm long
Ag Wire 40 mm long
EP1
EP4
EP2
1 mm dia.
3 mm long
4 mm dia.
1 mm thick
2 mm dia.
4 mm long
Ag Wire 70 mm long
Ag Wire 5 cm long
Ag wire 12 mm long
EP12
EP8
12 mm dia.
1 mm thick
8 mm dia.
1 mm thick
Ag wire 12 mm long
Ag wire 12 mm long
Reference Cell with 1.5 m lead
Reference Cell, 1.5 m lead, 2 mm pin
Reference Cell with 2.0 mm pin
Reference Cell with female connector
Reference Cell with epoxy body, 4.5 mm diam x 50 mm
Reference Cell with glass body, 4.0 mm diam x 75 mm
Reference Cell with glass body, 4.0 mm diam x 50 mm
Reference Cell with glass body, 1.5 mm diam x 50 mm
Ag/AgCl Electrode 0.5 mm diam x 20 mm
Ag/AgCl Electrode 0.8 mm diam x 20 mm
Ag/AgCl Electrode 1.0 mm diam x 2.5 mm
Ag/AgCl Electrode 2.0 mm diam x 4 mm
Ag/AgCl Electrode 4.0 mm diam x 1 mm
Ag/AgCl Electrode 8.0 mm diam x 1 mm
Ag/AgCl Electrode 12.0 mm diam x 1 mm
Adapter Cable for Ag/AgCl Pellets
RC1 / RC1T
25.4 mm
Insulator
3.9 mm DIA.
15.9 mm
13 mm
4 mm DIA.
8.5 mm
#24 AWG
insulated wire,
4 ft
4 mm DIA.
RCI has an unterminated
lead. RC1T is terminated
with a 2 mm pin.
2 mm DIA.
Ag/AgCl Pellet
RC2
25
RC2F
mm
25
mm
m
m
75
mm
& ELECTRODES
50
2 mm Jack
to Ag/AgCl Pellet
2 mm DIA. Gold Plated Pin
to Ag/AgCl Pellet
glass body
epoxy body
2.5 mm diam. Ag/AgCl pellet
3.5 mm diam. Ag/AgCl pellet
RC3
4.5 mm diam.
4 mm diam.
RC4
25
53
mm
1.5 m insulated lead
mm
50
mm
glass body
glass body
2.5 mm diam. Ag/AgCl pellet
1 mm diam. Ag/AgCl pellet
4 mm diam.
3 mm
RC5
1.5 mm diam.
GLASS, HOLDERS
RC1
RC1T
RC2
RC2F
RC3
RC4
RC5
RC6
EP05
EP08
EP1
EP2
EP4
EP8
EP12
3578
Ag Wire 40 mm long
RC6
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
203
Micromanipulators
Motorized Micromanipulators
M ICROMAN I PU LATORS
PiezoPatchTM: Piezo-motorized Micromanipulator suitable for patch clamp and IVF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205
MPM10: Piezo Controller for DC3001. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207
MPM20: Piezo Translator for M3301/DC3001. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207
SM325: Compact Programmable High Precision 3-D Micromanipulator System suitable for patch clamp and IVF. . . . . . . 208
HS6-3: Solid Programmable Ultra High Precision 3-D Micromanipulator System suitable for patch clamp and IVF. . . . . . 209
DC3314: 3-D Motorized Micromanipulator System with Manual Adjustment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
MM3-MS: Miniature Programmable 1-D Micromanipulator System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210
Manual Micromanipulators
MM1 & MM1-3: One & three-axis small miniature micromanipulators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210
MM3 & MM3-3: One & three-axis medium miniature micromanipulators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210
KITE: Economic 3-D micromanipulator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212
M3301: Most Popular 3-D micromanipulator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212
HS6: Solid High Precision 3-D micromanipulator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214
MMJR: Additional joystick controller on regular 3-D micromanipulator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214
MD4R: Dual Tool Holder 3-D micromanipulator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215
M325: Compact Backlash-Free 3-D micromanipulator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215
Stands & Accessories
Vibration Control Systems: Vibration-Free Platform and Workstation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219
Digital Micrometer Head with Non-rotating Spindle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
UMS: Stable Universal Manipulator Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
TB-1 & M3: Compact Tilting Bases and Weight for Micromanipulators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212
TBS: Solid Tilting Base for Micromanipulators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 213
Optional Mounting Devices: Clamps and Microscope Stage Adapter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 213
Magnetic Holding Devices: Easy to mount Micromanipulators at desired heights and angles. . . . . . . . . . . . . . . . . . . . . 216-218
Non-Magnetic Bases, Rods & Clamps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
204
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
PiezoPatch™ Micromanipulator
PPM5000 SPECIFICATIONS
TRAVEL DISTANCE
10 mm each axis
VELOCITY RANGE
“PENETRATION” MODE
10mm/s - 100mm/s
“CONTINUOUS” MODE
0.5-500 µm/s
“STEP” MODE
0.005-.5 µm/s
RESOLUTION
“CONTINUOUS” MODE
0.1 µm
“STEP” MODE
0.001 µm per step
DEPTH OF PENETRATION
“STEP SIZE” MODE
0.5-5 µm per step
LONG TERM STABILITY:
<4 nm drifting/hour @ 20° C
OPERATING VOLTAGE:
12V DC
SINGLE AXIS CONSUMPTION, MAX. SPEED:
<300 mA
TOTAL CONSUMPTION, MAX. SPEED:
<900 mA
DIMENSIONS:
ELECROMECHANICAL MODULE:
10.4(h) x 4.7(w)x 5.1(l) in.
265(h) x 120(w) x 130(l) mm
3.9(h) x 3.9(w) x 4.9(l) in.
CONTROLLER:
165(h) x 100(w) x 125(l) mm
WEIGHT
ELECTROMECHANICAL MODULE:
2.2 kg
CONTROLLER:
0.65 kg
M3301EH
Electrode
Holder
included
Headstage
adapter
included
501622 Universal
Micromanipulator
Stand available
separately
Vibration-free Platform
(VFP) not included
fine to be visually observed, a specially
designed acoustic feedback control is
included to keep operators aware of the
actuation of the manipulator.
To improve the productivity during use, the micropipette can be
exchanged rapidly without remounting the entire micromanipulator and
spending hours repositioning the capillary. The Rotary Pivot Base allows
the micromanipulator to rotate 360° horizontally. This base has a special
mounting pattern allowing it to be mounted directly on to a standard
Vibration-Free Platform (VFP), Vibration-Free Workstation (VFW), or a
Universal Manipulator Stand (501622 or 501623).
The universal capillary holder and headstage adaptor can be easily
rotated and adjusted to the desired height and angle. The headstage
adaptor fits most headstages from Axon and HEKA and can be
customized to fit other manufacturers headstages (contact WPI).
PiezoPatch is designed to be fully ambidextrous, therefore there is
no need to purchase both left-handed and right-handed versions to fit
everyone in the lab.
PPM5000 PiezoPatch™ Micromanipulator with Joystick Control
Optional Accessories
M3301EH Replacement Electrode Holder, straight, 14cm
15873
Angled Electrode Holder, 13 cm long
501622 Universal Micromanipulator Stand, 30 cm high
501623 Universal Micromanipulator Stand, 45 cm high
VFP
Vibration-Free Platform
Vibration-Free Workstation — see page 219
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
205
M ICROMAN I PU LATORS
PiezoPatchTM Micromanipulator (PPM5000) is a unique piezo-motor
driven micromanipulator with ultra high resolution (<1 nm/step), super
low drift (<4 nm/h), and long travel range (~10 mm/axis). It is ideal for
patch-clamp, electrophysiology and other high precision applications
within the life sciences. PiezoPatch establishes a new standard in
micromanipulator design.
At the heart of the PiezoPatch is WPI’s proprietary SonicWaveTM piezomotor that is controlled at 1 arc-second (1⁄3600 of a degree) per step.
This angular resolution translates to a theoretical linear movement
of ~0.4‑nm per step, an ultra high resolution that is beyond normal
measurement capability using standard methods. Another key advantage
of the PiezoPatch motor is the extreme stability. When de-energized,
the SonicWaveTM motor is completely locked with absolutely no
rotation. This locking mechanism completely eliminates mechanical
drift in the micromanipulator. This design is significantly different
compared to all other types of electromagnetic motors or piezo-operated
micromanipulators, which still require electric power to hold at the
stopped position. Electric power can introduce electrical noise, which
can interfere with experimental measurements. Furthermore, instabilities
in electrical power supply can cause drift of the micromanipulator.
Thermal drift is also caused by heat generated in the stopped
motor. These problems are completely eliminated by the PiezoPatch
SonicWaveTM motor, since it does not require power to maintain
its stopped position during the experiment. One additional feature of
the SonicWaveTM motor is its extremely high output torque compared
to motors of same size. This enables skip free precise movement of the
micromanipulator even under heavy load.
PiezoPatch has three distinct movement modes: Step, Continuous, and
Penetration. Continuous mode allows the micromanipulator to move
quickly (continuously) from the starting position towards the object. Step
mode enables ultra fine movements to be controlled by a single step in
increments as small as 1 nm per step. Penetration mode is used when
the glass micropipette is positioned close to the cell membrane and
the x-axis piezo motor is then activated using the joystick button. This
causes the micropipette to penetrate the membrane at high speed while
minimizing membrane disturbance.
The ergonomic joystick controller can move each axis or all axes in
three coordinate directions simultaneously. The speed of the travel is
determined by the deflection on the joystick. Since each movement is too
Non-rotating Spindle Digital Micrometer Head
Build your own precision micro-positioning device
M ICROMAN I PU LATORS
502102 SPECIFICATIONS
The new non-rotating
spindle digital
micrometer head
allows you to create
your own micropositioning instrument.
With micron-level accuracy, it gives higher
precision than a normal micromanipulator.
Since the spindle does not rotate as it
advances, instruments can be directly attached
without the need for a complicated decoupling
device. The digital display eliminates the need
to squint at the notational scale. Readings can
be clearly seen in either inches or millimeters.
You can read both absolute position and the
increment relative to a previously chosen point.
502102
Total Travel Distance
25 mm
Resolution
0.001 mm
Accuracy
± 0.003 mm
Spindle Diameter
∅ 8 mm
Mounting
∅ 12 mm x 10 mm
Total Length
166 mm
Measurement Mode
Absolute and
incremental
Digital Readout
mm or inch
Analog Readout
mm
Data Output
RS232
Environmental Protection IP54
Shipping Weight
0.51 kg (1.12 lb)
Non-Rotating Spindle Micrometer Head
Universal Manipulator Stand
Universal Micromanipulator Stands enable
scientists to mount their manual and
motorized micromanipulators at variable
angles and heights. A solid aluminum
platform with a grooved tower allows
the user to attach any micromanipulator
of any size or shape to the post for
infinite flexibility. Once mounted, the
micromanipulator can be set at any height
along the entire length (30 cm or 45
cm). The platform base comes configured
with industry standard pre-bored holes
(1/4-20 x 1” or M6 x 25 mm), allowing
direct mounting to any type vibrationfree table (for patch clamp recordings)
or optical bench (for laser and optical
measurements).
Using additional Rotation Clamps
(one included with stand), two or more
micromanipulators can be mounted on the
stand simultaneously in a space-saving
convenient manner. WPI’s Universal Stand
not only allows the user 360° flexibility
in manipulations but also promotes
independent angular transitions using a
single feather-light tensioner/adjustment
screw. This affordable stand is currently
the preferred choice in micromanipulator
stands — head and shoulders above setups using multiple magnetic-based stands
costing hundreds more when combined
with antiquated heavy steel base plates.
UMS SPECIFICATIONS
DIMENSIONS
Base plate
10.0 x 12.5 x 1.5 cm (LxWxH)
Stand
4.0 x 4.0 x 30 cm (LxWxH) (501622)
4.0 x 4.0 x 45 cm (LxWxH) (501623)
English 1/4 20 x 1”
Mounting holes
Matrix M6 x 25mm grid
501622
501623
501624
VFP
SHIPPING WEIGHT
501622
9 lbs (4 kg)
501623
11 lbs (5 kg)
Universal Micromanipulator Stand 30 cm high (includes one clamp)
Universal Micromanipular Stand 45 cm high (includes one clamp)
Optional Rotation Clamp
Vibration-Free Platform
Vibration-Free Workstation — see page 219
Vibration-free Platform
(VFP) not included
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
206
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
High speed
penetration and
precise control
Adapter MPH8
allows use of WPI
electrode holders!
MPM20
Piezo-Translator
Adapter MPH8
allows use of WPI
electrode holders!
DC3001 micromanipulator and
M-3 tilting base not included.
See page 209.
puncture characteristics. Lateral deviation from
the ideal axis of puncture (measured at the tip
of the electrode holder) is ± 5% of the step size.
SYS-MPM10
PM5
PM6
14104
14106
MPH8
Includes controller, piezo translator, electrode
holder, cables and mounting bracket. Shipping
weight: 6 lb (2.7 kg).
Piezo Controller for DC3001 Motorized Micromanipulator
Remote Controller for MPM-10
Replacement Electrode Holder for MPM10
Record/Inject Electrode Holder for MPM10, MPM20
Footswitch for MPM10, MPM20
Electrode Holder Adapter for MPM10 & MPM20
Specify line voltage
Piezo Translator
For M3301 and DC3001 micromanipulators
Especially recommended for use with the M3301 micromanipulator, the
MPM20 is a very efficient tool for intracellular injection. High penetration
speed and precise axial advance allows injection pipette to be brought
to its target position with tremendous accuracy. Lateral escape of the cell
is almost eliminated, and even tough membranes can be penetrated.
Independently selectable reverse speed setting can be used for fast
withdrawal, preventing adhesion of the injected cell to pipette tip. Mounts
directly onto DC3001 and M3301 micromanipulators. Use with DC3001
requires MS314 controller (for the micromanipulator).
The combination of the MPM20, a micromanipulator, and the PV820
PicoPump (see page 234) constitutes an extremely efficient system
for intracellular injection; cell penetration, injection and withdrawal are
executed automatically with the press of a button.
Shipping weight: 10 lb ( 4.5 kg ).
SYS-MPM20
PM7
14106
Piezo Translator
Replacement Electrode Holder for MPM20
Footswitch for MPM10, MPM20
Specify line voltage
Micromanipulator not included.
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
207
M ICROMAN I PU LATORS
The piezo-ceramic element in WPI’s MPM10
provides high penetration speed over an
extremely short distance (0.5 to 10.0 µm).
Because the range of travel of a dedicated
piezomanipulator is much too limited for it to
be useful independently, it must be mounted
on a manipulator. The MPM-10 piezo translator
combined with a DC3001 motorized micromanipulator (available separately) provides a
single electronically controlled system.
When the piezo element is activated, the
MPM-10 axis carrying the micropipette shoots
forward at a rate which is set on the control
panel, then immediately returns (at a slower
speed) to its starting position. As soon as the
piezo element begins its reverse travel, the
motorized manipulator starts to travel forward.
The complimentary opposition of these two
travel sequences results in the micropipette tip
remaining in its advanced absolute position.
The three axes of the DC3001 are controlled
by six buttons. Pressing a button for less than
0.3 seconds activates one step, the size of
which (0.5 to 10.0 micron) is set on the Step
Size control. Pressing longer activates the
continuous mode, at the rate set on the Motor
Speed control. Pressing the button for the X
axis forward direction activates the piezo mode.
Advancement speed of the piezo element can
be separately adjusted from 1 to 100 mm/sec.
Precise construction and special vibration
stabilizers ensure the MPM-10’s excellent
MPM10
Programmable High Precision
Motorized Micromanipulator
M ICROMAN I PU LATORS
suitable for patch clamp and IVF
WPI introduces a compact high
precision motorized micromanipulator (SM325). It features
low noise, high stability, a userfriendly software interface and
economy that are major concerns
in IVF and patch clamp research.
The SM325 is driven in all
three axes through high resolution stepping motors, which can
achieve 40,000 steps per revolution (25 nm/step) with completely
vibration-free motion. In a normal
lab environment, it can stay localized overnight without drifting.
The 25mm long range of travel
makes it unnecessary to have an
additional manual coarse adjustment.
Its compact construction makes
mounting onto the stage plate of
a microscope practical. The x-axis
can be tilted by 90° that allows
for a better positioning of the
injection tool. An additional tilting fixture makes it possible to tilt
the tool holder for fast and easy
cleaning and exchange of the
injection tool.
The MCL3 controller features
a dynamic micro-step function
that makes very quick positioning
possible with maximum accuracy.
Motor control is achieved with
a linear output amplifier, which
also drastically reduces electronic
noise. Users can control the
micromanipulators by joystick,
keyboard, mouse or computer.
The user-friendly software
program can be enabled to
remember up to 999 position
coordinates from previous
procedures and can robotically
repeat this same positioning
sequence.
SM325-M
M3301EH Electrode
Holder included
MCL3-SM325
Universal Manipulator
Stand not included.
SM325 SPECIFICATIONS
CONTROL METHOD
Joystick, software, or both
TRAVEL DISTANCE
25 mm each axis
RESOLUTION
25 nm/step or 40,000 steps/rev
MAXIMUM SPEED
4 mm/second
POWER SUPPLY
120/240V, 50/60Hz
DIMENSIONS
SM325-M
5x7x5.5 in. (13x18x14 cm) (WxLxH)
MCL3
9.8x9x3.7 in. (25x23x9.5 cm) (WxLxH)
SHIPPING WEIGHT
SM325-M
6 lb. (2.7 kg)
MCL3
11 lb. (5 kg)
SM325
High Resolution 3-D Motorized Micromanipulator (SM325-M) & Controller (MCL3)
SM325-M High Resolution 3-D Motorized Micromanipulator
MCL3
Controller with Joystick and software for SM325-M
Optional Accessories
M3301EH Replacement Electrode Holder, straight, 14cm
15873
Angled Electrode Holder, 13 cm long
501622
Universal Micromanipulator Stand, 30 cm high
501623
Universal Micromanipulator Stand, 45 cm high
VFP
Vibration-Free Platform
Vibration-Free Workstation — see page 219
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
208
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Programmable Ultra High Precision
Motorized Micromanipulators
M3301EH Electrode
Holder included
The HS6-3 is supplied with manual controls and stepper motor drives in all 3
axes. The extremely solid construction eliminates the vibrations and drifts. With
the utmost precision and long travel distance in all three directions, HS6-3 is the
ideal tool for patch-clamp or electrophysiological applications. The tilting device is mounted on the base
plate serves as coarse height adjustment as well and the tool holder can be swiveled in all directions.
The MCL3 controller features a dynamic micro-step function that makes very quick positioning possible
with maximum accuracy and free of vibration. Motor control is achieved with a linear output amplifier, which
also drastically reduces electronic noise. Users can control the micromanipulators by joystick, keyboard,
mouse or computer. The user-friendly software program can be enabled to remember up to 999 position
coordinates from previous procedure and
HS6-3 SPECIFICATIONS
can robotically repeat this same positioning
sequence.
Control Method: Joystick, software, or both
HS6-3
25 mm
10 nm/step
Maximum Speed: 4.5 mm/sec.
Stability: 1 nm/hour at 24°C
Power Supply: 120/240 V, 50/60 Hz
Dimensions:
HS6-3: 6.1x9.7x9.9 in (15.5x24.6x25 cm) (WxLxH)
MCL3: 9.8x9x3.7 in (25x23x9.5 cm) (WxLxH)
Weight:
HS6-3: 13.2 lb. (6kg)
MCL3: 7.7 lb. (3.5kg)
M ICROMAN I PU LATORS
Travel (X-Y-Z): Resolution: MCL3-HS6
HS6-3
High Resolution Motorized HS6 Micromanipulator and Controller includes HS6-3M and MCL3
HS6-3M High Resolution Motorized HS6 Micromanipulator MCL3
Controller with Joystick and software for HS6-3M OPTIONAL ACCESSORIES
M3301EH Replacement Electrode Holder, straight, 14cm
15873
Angled Electrode Holder, 13 cm long
501622
Universal Micromanipulator Stand, 30 cm high
501623
Universal Micromanipulator Stand, 45 cm high
VFP
Vibration-Free Platform
Vibration-Free Workstation — see page 219
DC3001
Manual coarse controls use cross roller bearing slides.
Vernier scales allow readings to 0.1 mm. All controls
are closely grouped so adjustments can be made in any
plane with minimum effort. The DC3001 features DC motor drives and fine con­trol
micrometers in all three axes.
Left- or right-handed versions of the DC3001 are supplied with a stan­dard
12 mm clamp. Standard accessories provided include one mi­cro­elec­trode holder
and a securing bolt and wrench.
The sophisticated MS314 Controller allows control of all three axes. Movements
may be continuous through the use of cross switches, or the controller can cause
the DC3001 to step in defined increments. Steps as small as 0.5 µ are possible. A
popular joystick controller, STM3, allows control of the X, Y and Z axes.
15873 Electrode
Holder not
included
SYS-DC3314R Manipulator (right-handed) & MS314 Controller
SYS-DC3314L Manipulator (left-handed) & MS314 Controller
Specify line voltage.
Also see magnetic stands.
System components also available separately:
DC3001R
Motorized Ma­nip­u­la­tor, right-handed
DC3001L
Motorized Ma­nip­u­la­tor, left-handed
SYS-MS314
Controller for DC3001
STM3
Joystick Controller for DC3001
OPTIONAL ACCESSORIES
TBS
Tilt Base with Screw Adjustment
PM5
Remote controller for MS314 and MPM-10
5464
5-lb Weight for Tilting Base (shipping weight: 7 lb [3 kg])
M2
Additional 12 mm Clamp
M-3
80° Tilting Base 6mm x 1mm screw (Shipping Weight: 2 lb)
M4C
Microscope Stage Adapter
M5
Additional 10 mm Clamp
M6
Additional 1⁄2-in. Clamp
M3301EH Replacement Electrode Holder (14 cm long)
15873
Angled Electrode Holder (13 cm long)
501607
Cable for MS314 and DC3001
TBS Tilt Base
not included
MS314 Controller
STM3 Controller (available separately) ➡
DC3001 SPECIFICATIONS
Travel Range Resolution
Manual:
X-axis 37 mm 0.1 mm
Y-axis 20 mm 0.1 mm
Z-axis 20 mm 0.1 mm
Travel Range Resolution Maximum Speed
Motorized: X-axis 10 mm Y-axis 10 mm 0.5 µm 0.5 µm 0.2 mm/sec
0.2 mm/sec
Z-axis 10 mm 0.5 µm 0.2 mm/sec
Shipping Weight:
DC3001: MS314: 3 lbs (1.4 kg)
1.8 lbs (0.9 kg)
STM3: 2.8 lbs (1.3 kg)
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
209
M ICROMAN I PU LATORS
Miniature Micropositioners
MM3-C
clamp
MM3-3
micropositioner
opens
0-7 mm
MM3-A
adapter
MM1-3
micropositioner
and MM1-C
clamp
opens
0-4 mm
MB2
magnetic
base
available
separately
MM1-A
adapter
(see page
192)
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
210
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
MM1-C
clamp
MM3-3
MM1-A
adapter
Mini Micropositioner
(MM1 and MM1-3)
Single stage measures only 5 × 11 × 26 mm with 3 mm travel. Provides
precise and smooth motion with no backlash, positive spring loaded carriage,
straight within 1 micron and less than 1 micron maximum wobble. Features
fine 80 TPI screw adjustment. 10 mm square mounting surface has a 3.9 mm
tapped center hole for transmission and/or mounting. Available in single X
(MM1), X-Y, and X-Y-Z (MM1-3) axis configurations.
Micropositioner (MM3 and MM3-3)
Single stage measures only 7 × 17 × 44 mm with 13 mm travel. Offers
precise and smooth motion with no backlash, positive spring-loaded carriage,
straight within 1.5 microns, and less than 1.5 microns maximum wobble.
Features fine 80 TPI screw adjustment. 13 mm square mounting surface has
a 7 mm tapped center hole for transmission and/or mounting. Available in
single X (MM3), X-Y, X-Y-Z (MM3-3) axis configurations.
MINI-MICROPOSITIONER SPECIFICATIONS
MM3
MM1
MM1
MM1-3
MM1-A
MM1-C
MM3
MM3-3
MM3-A
MM3-C
MM3-ALL
MM1-ALL
MM1
MM1-3
MM3
AXIS
X
X-Y-Z
X
X-Y-Z
STRAIGHT LINE
ACCURACY
Within 1 micron
over 3 mm travel
Within 1 micron
over 3 mm travel
Within 1.5 micron
over 13 mm travel
Within 1.5 micron
over 13 mm travel
3.9 mm tapped
3.9 mm tapped
hole, 8-32 thread hole, 8-32 thread
7 mm tapped hole,
5/16-16 thread
7 mm tapped hole,
5/16-16 thread
CLEAR
APERTURE
MM#-3
LOAD CAPACITY
255 g Normal
255 g Normal
340 g Normal
340 g Normal
FINISH
Black Anodized
Black Anodized
Black Anodized
Black Anodized
WEIGHT
3 grams/axis
12 grams/axis
14 grams/axis
48 grams/axis
TYPE
Fine Screw
Fine Screw
Fine Screw
Fine Screw
TRAVEL
3 mm
3 mm
13 mm
13 mm
Mini Micropositioner, one axis, 3 mm travel
Mini Micropositioner, three axes, 3 mm travel
Mounting Adapter for MM1 and MM1-3
Clamp for MM1 and MM1-3
Micropositioner, one axis, 13 mm travel
Micropositioner, three axes, 13 mm travel
Mounting Adapter for MM3 and MM3-3
Clamp for MM3 and MM3-3
Complete 3-Axis Micropositioner & Magnetic Stand
Complete 3-Axis Mini Micropositioner & Magnetic Stand
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
211
M ICROMAN I PU LATORS
MM1-3
KITE
M3301 Manual
Micromanipulator
M ICROMAN I PU LATORS
The world’s most widely used micromanipulator
Weighing just 550 grams and employing a slim space-saving design, this
well-built micro­ma­n­ip­u­la­tor outsells all oth­ers world­wide for high precision
experiments where mag­ni­fi­ca­tion is in the range of up to 250×. Its design
allows units to stand tightly grouped — since all control knobs project to the
rear. And because con­trol knobs are clustered with­in an 8 cm area in a sin­
gle vertical plane, res­o­lu­tion is quick — the hand works blindly while the eye
monitors the microscopic im­age. Vernier scales allow readings to 0.1 mm;
x-axis fine control allows readings to 10 microns.
The instrument employs rack-and-pinion drive, V-shaped guideways,
and cross roller bearings, so all movement is sure and repeatable,
without drift, sideplay, back­lash, or sticking. Contact parts are milled of
hardened steel for high performance and long life.
Left- or right-handed versions of the M3301 are supplied with a
standard 12 mm clamp (M2) and one microelectrode holder
(M3301EH).
KITE-R
15873
Electrode Holder
not included
Economy Manual Micromanipulator
Vernier scales allow readings to 0.1 mm. X-axis fine control allows
readings to 10 µm.
Left- or right-handed versions of the KITE mi­cro­ma­n­ip­u­la­tor are supplied
with a standard 12 mm clamp and electrode holder M3301EH.
KITE-R
KITE-L
TB-1
KITE-TB-R
KITE-TB-L
Kite Manual Manipulator (right-handed)
Kite Manual Manipulator (left-handed)
Tilting Base (Optional) Shipping weight: 2 lb (1 kg)
Kite (right-handed) + Tilting Base Combo
Kite (left-handed) + Tilting Base Combo
Shown on
optional M-3
Tilting Base with
optional 5-lb
Weight #5464
KITE SPECIFICATIONS
TRAVEL RANGE
RESOLUTION
X-axis Fine
10 mm
0.01 mm
X-axis
35 mm
0.1 mm
Y-axis
25 mm
0.1 mm
Z-axis
25 mm
0.1 mm
SHIPPING WEIGHT
3 lbs (1.4 kg)
Optional Accessories
M3301EH Re­place­ment Electrode Holder (14 cm long)
15873
Optional An­gled Electrode Holder (13 cm long)
5464
5-lb Weight for Tilting Base
Shipping weight: 7 lb (3 kg)
500475
Ball Joint, 7 cm long, for ∅ 8 mm Holder
500476
Ball Joint, 4 cm long, for ∅ 4 mm Holder
M4C
Microscope Stage Adapter
Also see magnetic stands.
M3301R
M3301L
M-3
M3301-M3-R
M3301-M3-L
502105
Manual Manipulator, right-handed
Manual Manipulator, left-handed
80° Tilting Base 6mm x 1mm screw (Optional)
Manual Manipulator (right handed) & Tilting Base Manual Manipulator (left handed) & Tilting Base Axis Adjustment Tool M3301 SPECIFICATIONS
TRAVEL RANGE
RESOLUTION
X-axis Fine
10 mm
0.01 mm
X-axis
37 mm
0.1 mm
Y-axis
20 mm
0.1 mm
Z-axis
25 mm
0.1 mm
SHIPPING WEIGHT
3 lbs (1.4 kg)
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
212
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
s e:
’
e
r
l
He ang
w
e
an
Ball-joint holder attachment
7 cm
7.9 mm diam.
500475
500476
Ball Joint, 7 cm long, for O.D. 5-9 mm Electrode Holder (shown)
Ball Joint, 4 cm long, for O.D. 2.8-4.5 mm Electrode Holder
80 mm
Interchangeable clamps allow ma­nip­u­la­tors to be
mounted on a variety of supports.
12 mm diameter
support arm
Quick, secure
mounting to any
microscope stage
(maximum opening:
20 mm).
M5 ∅ 10 mm clamp
M4C Microscope
Stage Adapter
— clamps onto
microscope stage
to provide a stable
support for any
manipulator with a
∅ 12 mm clamp.
M2 ∅12 mm clamp
M6 ∅ 1⁄2-in. clamp
M2
M5
M6
∅ 12 mm Clamp
∅ 10 mm Clamp
∅ 1/2-in. Clamp
M4C
Microscope Stage Adapter
At last — a tilt base you can operate with one hand!
or .
lat ed
ipu clud
n
a
M t in
no
6.5 in.
High Precision,
High Stability
Adjust tilt angle
easily by simply
turning knob of
thread­ed shaft.
Tilt angle may be
set at up to 35°.
Manipulator
mounting bracket
included.
Two sets of mounting holes are pre­
drilled for WPI ma­nip­u­la­tors (M3301R
shown) but steel platform may be
drilled for mount­ing other devices.
TBS
Tilt Base with Screw Adjustment
Shipping Weight 7 lb
Tighten locking
screw to lock
platform angle.
3.5-pound steel base
provides additional
stability for your mi­cro­
ma­n­ip­u­la­tor. Holes
also allow permanent
mount­ing to your
benchtop.
5” x 6” footprint saves
space in your work area.
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
213
M ICROMAN I PU LATORS
Mount a manipulator on
your microscope stage
High Resolution Manual Micromanipulators
M ICROMAN I PU LATORS
HS6 Micromanipulator
Engineered for stability, and built on a twelve-pound steel plate, this
instrument is chosen worldwide for high res­o­lu­tion micro-re­cord­ing.
such as patch clamping, and other research requiring sol­id, drift-free
per­for­mance. A superior tool in its own right, HS6 serves equal­ly well
as a base for other precision microdrives. HS6 can be bolted directly
to a lab fixture or vibration-free platform. Resolution is extremely
high — each gra­dua­tion on its large micrometer barrels indicates
just 5 micron movements. Rack and pinion drive, V-shaped
guide­ways, and cross roller bearings give sure, re­peat­able move­
ments without sideplay, slipping, or stick­ing. All contact parts
are milled of hard­ened steel. A flexible ball-joint assembly allows
the electrode to be positioned at any angle relative to the x, y, or z axis.
The entire manipulator tilts forward to 25 degrees allowing rapid coarse
ad­just­ment of the elec­trode, and allowing cell pen­e­tra­tion along the axis
of any of the mi­crome­ters. Simple, precise, and durable, the HS6 will
provide years of dependable per­for­mance.
Rock-solid —
superb resolution
M3301EH
electrode holder
included
HS6 SPECIFICATIONS
TRAVEL RANGE
RESOLUTION
X-axis
25 mm
5 µm
Y-axis
25 mm
5 µm
Z-axis
25 mm
5 µm
SHIPPING WEIGHT
25 lbs (11 kg)
DIMENSIONS
9.9 x 6.6 x 9.9 in. (H x W x L)
SYS-HS6
M3301EH
15873
VFP
Micromanipulator
Replacement Electrode Holder (14 cm x ∅ 7.2 mm)
Optional Angled Electrode Holder (13 cm long)
Vibration-Free Platform
Vibration-Free Workstation — see page 219
Joystick-Controlled
Micromanipulator
0°
Specially adapted for use with the Nanoliter Injector (page 258) for
oo­cyte in­jec­tion and similar applications, this joystick-controlled
mi­cro­ma­n­ip­u­la­tor al­lows an easy “steer­ing” motion that translates
normal hand move­ment into smooth sub­mil­li­me­ter shifts.
Viewed mi­cro­scop­i­cal­ly, move­ment of the tool-tip cor­re­sponds
naturally to hand move­ment, so ac­cu­rate resolution is
intuitive and quick. All fine ad­just­ment can be controlled
M3301EH
by the joy­stick. Piv­ot­ing for­ward, back­ward, or lat­er­ally
electrode holder
gives pre­cise x-y ad­just­ment. For add­ed con­ve­nience,
included
a sep­a­rate coarse control lever is also pro­vid­ed for
quick rais­ing and low­er­ing. A stop screw—which
is set once res­o­lu­tion is achieved—eliminates re­fo­cus­ing and stream­lines re­pet­i­tive
work by guiding the tip to its pre­vi­ous fo­cus­sing plane. The stop screw also prevents
the tool-tip from be­ing broken during sudden low­er­ing and elim­i­nates down­ward
drift—place­ment is stable enough for even ex­tended use. Be­cause the probe holder
tilts a full 90°, the tool-tip pivots easily for precise positioning. Rack-and-pinion drive,
V-shaped guide­ways, and cross roller bear­ings elim­i­nate backlash, slip­ping, and
sticking. All contact parts milled from hardened steel for precise performance and
long life.
to
°
90
ls)
ro
JR
cont
M M handed
t
(righ
Joystick travel: 0.35 mm to 3.5‑mm, de­pend­ing on reduction gear ratio setting
(adjustable between 1:15 and 1:150).
.
MMJR
MMJL
Joystick Micromanipulator (Right-Handed)
Joystick Micromanipulator (Left-Handed)
OPTIONAL ACCESSORIES
M3301EH Re­place­ment Electrode Holder (14 cm 5 ∅ 7.2 mm)
15873
Angled Electrode Holder (13 cm long)
M4C
Microscope Stage Adapter
500475
Ball Joint, 7 cm long, for ∅ 8 mm Holder
500476
Ball Joint, 4 cm long, for ∅ 4 mm Holder
MMJ SPECIFICATIONS
TRAVEL RANGE
X-axis
37 mm
0.1 mm
Y-axis
20 mm
0.1 mm
0.1mm
Z-axis
25 mm
JOYSTICK (X,Y axis)
0.35~3.5 mm
SHIPPING WEIGHT
4 lbs (1.8 kg)
RESOLUTION
Also see magnetic stands.
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
214
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Micrometer Slide Micromanipulator
The M325 can be configured
from left- to right-handed
version in 60 seconds!
M3301EH
electrode holder
included
Mounts onto horizontal or vertical
rods — any diameter from 10 mm
to 12.7 mm.
M325 SPECIFICATIONS
TRAVEL RANGE
RESOLUTION
X-axis
25 mm
10 µm
Y-axis
10 mm
10 µm
Z-axis
10 mm
10 µm
SHIPPING WEIGHT
4 lbs (1.8 kg)
The M325 three-axis man­u­al mi­cro­ma­n­ip­u­la­tor is built of preci­sion
mi­crome­ter-ac­tu­at­ed lin­ear slides. Each slide is com­prised of a large
microme­ter head and a spring-return linear slide. The mi­cro­ma­n­ip­u­la­tor
has been carefully designed to min­i­mize wear in the moving components
to achieve a long op­er­a­tion­al life without the necessity for fre­quent main­
te­nance or ad­just­ment. The mi­crome­ter head is grad­u­at­ed in 10 mi­cron
steps which enable re­peat­able po­si­tion­ing to an ac­cu­ra­cy of ± 2 mi­crons.
A unique spring return mechanism is used to trans­mit move­ment of
the microme­ter spin­dle to the slide car­riage — eliminating back­lash, lost
motion and re­duc­ing thread wear. Each lin­ear slide utilizes ball bear­ings
which en­able the M325 to carry loads of up to 1 kg.
The toolholder can clamp onto tools with shaft di­am­e­ters of 3.0 mm
to 12.7 mm and allows rotation around two axes. This pro­vides a wide
range of options for in­cor­po­rat­ing the ma­nip­u­la­tor into your work­stations.
The M325 can also be con­fig­ured very eas­i­ly in left- or right-hand­ed
versions to allow several units to be positioned in close proximity.
A quick-release clamp allows easy mounting onto any rod from
10‑mm to 12.7 mm diameter.
M325
3-Axis Fine Controlled Manual Micromanipulator
OPTIONS AND ACCESSORIES
M3301EH Replacement Electrode Holder (14 cm long)
15873
Optional Angled Electrode Holder (13 cm long)
14444
Optional Differential Micrometer Head (per axis)
500475 Ball Joint, 7 cm long, for ∅ 8 mm Holder
500476 Ball Joint, 4 cm long, for ∅ 4 mm Holder
Also see magnetic stands.
Also see Universal Manipulator Stands.
Dual Tool-Holder Micromanipulator
A small and compact micromanipulator for manual manipulation in all three axes (x,
y and z), the MD4 is equipped with a mounting bracket for a second tool or elec­trode
holder which can be positioned in the x and y axes in­de­pen­dent of the manipulator
and may also be tilted and swiveled by two fine-adjust screws. Scales allow readings
of coarse adjustment with an ac­cu­ra­cy of 100 µm. Additional x-axis fine control is
achieved with a micrometer screw with a resolution of 10 µm. Supplied with one
M3301EH electrode holder and a 12 mm clamp for mounting on M10 Stand or other
12 mm supports. May also be mounted on optional M-3 Tilting Base.
M3301EH
electrode holders
included
MD4L
(left-handed
controls)
Travel, standard electrode: x-axis, 37 mm (fine, 10 mm); y-axis, 20 mm; z‑axis,
25 mm. Additional electrode: x-axis, 7 mm; y-axis, 10 mm.
MD4R
MD4L
MD4-M3-R
MD4-M3-L
Double-Holder Micromanipulator (right)
Double-Holder Micromanipulator (left)
Double-Holder Micromanipulator (right) + Tilting Base
Double-Holder Micromanipulator (left) + Tilting Base
OPTIONAL ACCESSORIES
M3301EH
Replacement Electrode Holder (14 cm long)
15873
Optional Angled Electrode Holder (13 cm long)
M2
Additional ∅ 12 mm Clamp
M-3
80° Tilting Base 6mm x 1mm screw
M4C
Microscope Stage Adapter
M5
Additional ∅ 10 mm Clamp
M6
Additional ∅ 1⁄2-in. Clamp 5464
5-lb Weight for Tilt­ing Base*
500475
Ball Joint, 7 cm long, for ∅ 8 mm Holder
500476
Ball Joint, 4 cm long, for ∅ 4 mm Holder
*Shipping weight: 8 lb (3.6 kg)
Also see magnetic stands.
M-3 Tilting Base not included
MD4 SPECIFICATIONS
TRAVEL RANGE
RESOLUTION
X-axis Fine
10 mm
10 µm
X-axis
37 mm
100 µm
Y-axis
20 mm
100 µm
Z-axis
25 mm
100 µm
SHIPPING WEIGHT
3 lbs (1.4 kg)
Also see Universal Manipulator Stands.
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
215
M ICROMAN I PU LATORS
Toolholder rotates
around two axes, can
hold tools from ∅3.0 mm
to ∅12.7 mm.
M ICROMAN I PU LATORS
Magnetic
Holding Devices
10 mm ∅
10 mm ∅
10 mm ∅
5-6.5 mm ∅
M1
M1L
A precision base providing stable support for such devices as electrodes and
manipulators. Adjustable second arm
adopts a variety of angles. (Optional M5
10 mm clamp should be added for use
with M3301, DC3001, MD4 and MMJ
manipulators.)
Base:
50 ( w ) x 58 ( l ) x 55 ( h ) mm
( 2.0 x 2.3 x 2.2 in. )
Vertical Holding Power:
80 kgf (176 lb force)
Main Pole:
diameter: 12 mm (0.47 in.)
length: 176 mm (6.9 in.)
Sub Pole:
diameter: 10 mm (0.39 in.)
length: 165 mm (6.5 in.)
Clamp Hole:
diameter: 4.5 mm and 6.5 mm
Weight:
1.8 kg (4 lb)
M1
M5
MB2
Same base and support arm as M1, but
equipped with a longer (14-inch) vertical
post. (Optional M5 10 mm clamp should
be added for use with M3301, DC3001,
MD4 and MMJ manipulators.)
Base:
50 ( w ) x 58 ( l ) x 55 ( h ) mm
( 2.0 x 2.3 x 2.2 in. )
Vertical Holding Power:
80 kgf (176 lb force)
Main Pole:
diameter: 12 mm (0.47 in.)
length: 356 mm (14 in.)
Sub Pole:
diameter: 10 mm (0.39 in.)
length: 165 mm (6.5 in.)
Clamp Hole:
diameter: 4.5 mm and 6.5 mm
Weight:
1.8 kg (4 lb)
M1L
M5
Mechanical clamping type tightens three
joints simultaneously just by on-tough
operation. Arm is freely adjustable without
distortion. Equipped with fine adjuster
and medium size magnet for stabilizing
the base. Suitable for performing precision
operation.
Magnetic Base:
30 ( w ) x 30 ( l ) x 30 ( h ) mm
( 1.2 x 1.2 x 1.2 in. )
Vertical Holding Power:
17 kgf (37 Ib force)
Arm:
L1: 46 mm (1.8 in.)
L2: 46 mm (1.8 in.)
L3: 39 mm (1.5 in.)
Clamp Hole:
Adjustable from 5 to 6.5 mm
Weight:
0.38 kg (0.83 Ib)
MB2 Compact Magnetic Stand
Magnetic Stand
10 mm Clamp
M8
A ball joint at the base of the main post
allows 360° rotation, offering con­sid­er­able
versatility. The second arm adopts angles
up to 75°. (Optional M5 10 mm clamp
should be added for use with M3301,
DC3001, MD4 and MMJ ma­nip­u­la­tors.)
Magnetic Base:
50 ( w ) x 58 ( l ) x 55 ( h ) mm
( 2.0 x 2.3 x 2.2 in. )
Vertical Holding Power:
80 kgf (176 lb force)
Main Pole:
diameter: 12 mm (0.47 in.)
length: 194 mm (7.6 in.)
Sub Pole:
diameter: 10 mm (0.39 in.)
length: 165 mm (6.5 in.)
Clamp Hole:
Adjustable from 4.5 mm to 6.5­mm
Weight:
1.8 kg (4 lb)
M8
M5
Magnetic Stand
10 mm Clamp
Magnetic Stand
10 mm Clamp
Mounting your Micromanipulator
Three of the stands above — M1, M1L, and M8
— have 10 mm diameter mounting rods. The
standard mount on several WPI manipulators
(DC3001, KITE, M3301, MMJ, and MD4)
M5
accommodates a 12 mm rod. In order to use
one of these three stands, you will need to
replace the manipulator's standard 12 mm
mounting clamp with the optional M5 clamp.
∅ 10 mm Clamp
M5 — ∅ 10 mm clamp
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
216
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
The base of each stand exerts a
powerful magnetic force that holds
it solidly on ferrous metal surfaces
— even vertically or upside-down
12 mm ∅ x 25mm
12 mm ∅
6-8 mm ∅
Useful as a probe holder,
the M11 is not suitable
for heavier items such as
micromanipulators.
M9
M10
M10L
M11
Mechanical clamp tightens three rotatable
joints simultaneously with one locking
knob. Arm adjusts without distortion. Base
exerts a magnetic force of 100 kilos for
greatest stability. Equipped with fine adjustment for precise operations.
Similar to M1 but with a 12 mm diameter
sub pole (fits 12 mm clamp supplied with
M3301, DC3001, MD4 and MMJ ma­nip­
u­la­tors).
Same as M10 but equipped with a taller
(14-inch) vertical main pole.
Bends freely for maximum flexibility. The
connecting arm twists and bends like a
snake. Lock the arm in position with a flick
of the controlling lever.
Magnetic Base:
50 ( w ) x 60 ( l ) x 55 ( h ) mm
( 2.2 x 2.4 x 2.2 in. )
Vertical Holding Power:
100 kgf ( 220 lb force )
Arms:
L1:
119 mm (4.7 in.)
L2:
106 mm (4.2 in.)
L3:
25 mm (0.98 in.)
Ø 12 mm (0.472 in.)
Clamp Hole:
none
Weight:
1.8 kg (4 lb)
M9
Magnetic Stand
Magnetic Base:
50 ( w ) x 58 ( l ) x 55 ( h ) mm
( 2.0 x 2.3 x 2.2 in. )
Vertical Holding Power:
80 kgf ( 176 lb force )
Main Pole:
diameter: 14 mm (0.55 in.)
length: 178 mm (7 in.)
Sub Pole:
diameter: 12 mm (0.47 in.)
length: 165 mm (6.5 in.)
Clamp Hole:
Adjustable from 4.5 mm to 6.5 mm
Weight:
1.8 kg (4 lb)
M10
Powerful Ball Joint
Rare Earth Magnet
Use in constructing your own holding
device for small parts/equipment
● Small but very powerful: holds 2 kilograms (~5 pounds)!
● Steel ball rotates freely 360° on a 180° axis
● M3 mounting screw on ball for attachment to equipment
● Magnet base threaded (M3) for mounting onto a base or
equipment
Magnetic Base:
50 ( w ) x 58 ( l ) x 55 ( h ) mm
( 2.0 x 2.3 x 2.2 in. )
Vertical Holding Power:
80 kgf ( 176 lb force )
Vertical Holding Power:
80 kgf ( 176 lb force )
Main Pole:
diameter: 14 mm (0.55 in.)
length: 356 mm (14 in.)
Main Pole:
diameter: 16 mm (0.63 in.)
length: 315 mm (12.4 in.)
Sub Pole:
diameter: 12 mm (0.47 in.)
length: 165 mm (6.5 in.)
Clamp Hole:
Adjustable from 4.5 mm to 6.5 mm
Weight:
1.8 kg (4 lb)
Sub Pole:
none
Clamp Hole:
Adjustable from 6 mm to 8 mm
Weight:
1.4 kg (3 lb)
M10L Magnetic Stand
M11
Magnetic Stand
This novel magnetic ball joint has
phenomenal holding power for up
to 2 kg of attached weight while
permitting the ball a full 360°
rotation on a 180° axis. You can
freely orient your equipment to an
infinite number of positions within
this rotation. This is made possible
by the combination of a steel ball
(10 mm diameter) and a powerful
rare earth magnet contained in
the magnet cylinder (φ 10 x 20mm).
Convenient M3 attachment sites are provided on
Magnetic Base:
50 ( w ) x 58 ( l ) x 55 ( h ) mm
( 2.0 x 2.3 x 2.2 in. )
Magnetic Stand
both the ball (male) and the
magnet base (female).
For use with micromanip­
ulators for the positioning and
holding of optical instruments
including various lighting
sources and lasers, pipettes
and any small parts that would
benefit from the flexibility
offered by this new magnetic
ball joint.
500871
M3 x 12 mm
28 mm
M3 x 5 mm
10 mm
Magnetic Ball Joint
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
217
M ICROMAN I PU LATORS
12 mm ∅
M ICROMAN I PU LATORS
Magnetic
Holding Devices
M7
Square Base
Round Base
An ideal accessory for optical tables and
vibration-free platform. Reduces experimental set-up time by allowing free positioning and instant clamp down of optical
components. Switchable ON/OFF magnetic
circuit permits fine adjustment and precise
positioning.
● Easy ON/OFF operation using lever
● Thin and powerful magnetic force
● Generous array of tap holes
Holding Power:
20 kgf (44 Ib force)
Dimension:
75 (OD) x 20 (h) mm
2.9 (OD) x 0.8 (h) in.
Holding Power:
20 kgf (44 Ib force)
Dimension:
65 (w) x 65 (l) x 20 (h) mm
2.6 (w) x 2.6 (l) x 0.8 (h) in.
Mounting Hole:
8-M4 x 0.7, depth 6mm
M8 x 1, depth 6mm
Span 25mm
Mounting Hole:
4-M4 x 0.7, depth 6mm
M8 x 1, depth 6mm
Span 35mm
Weight:
0.6 kg (1.3 Ib)
Weight:
0.7 kg (1.5 Ib)
501651
503568
An ideal accessory for optical tables and
vibration-free platform. Reduces experimental set-up time by allowing free positioning and instant clamp down of optical
components. Switchable ON/OFF magnetic
circuit permits fine adjustment and precise
positioning.
● Easy ON/OFF operation using lever
● Thin and powerful magnetic force
● Generous array of tap holes
Magnetic Base, 75mm diameter
Magnetic Base, 50mm diameter
501653
503569
503570
503571
Magnetic Base,
65x65mm
Magnetic Base,
45x45mm
Magnetic Base,
90x90mm
Magnetic Base,
120x120mm
MOBITY
MOBITYTM is a new magnetic clamping
system. With its ease of use, only one hand
is needed to operate the attractive power.
The MOBITYTM has a strong 88lbf pull,
yet weighs only 1.5 lbs. MOBITYTM meets
various applications with 4 tapped holes
on the top surface. Requires (1) 9V alkaline
battery (included).
Holding Power:
40 kgf (88 Ib force)
Dimension:
55 (w) x 73 (l) x 50 (h) mm
2.2 (w) x 2.9 (l) x 2.0 (h) in.
A small holder ideal for use where space
is limited. Main post unscrews from base
which may then be used alone as a switchable magnetic holder.
Magnetic Base:
30 (w) x 35 (l) x 35 (h) mm
1.2 (w) x 1.4 (l) x 1.4 (h) in.
Vertical Holding Power:
20 kgf (44 Ib force)
Main Pole:
Diameter: 7mm
Length:
52mm
Screw threads
Clamp Hole:
Diameter: 6mm
Weight:
0.36 kg (0.8 Ib)
M7 Compact Magnetic Stand Mounting Hole:
3-M4, depth 20mm
M8, depth 15mm
Weight:
0.7 kg (1.5 Ib)
501652 MOBITY Magnetic
Clamping System
81⁄2"x12" Steel Base
Plate #5052
BASE PLATES: A magnetic stand
requires a steel mounting surface. WPI’s
steel base plates have plenty of mass to
give stability to your ex­per­i­men­tal setup.
Beveled edges make them easy to handle;
rubber feet hold them off the benchtop,
making them easier to grasp when moving;
and the special black coating provides a
durable protective finish.
12"x24" Steel Base
Plate #5479
ACCESSORIES
5052
Steel base plate, 81⁄2 x 12 in. (10 lb)
5479
Steel base plate, 12 x 24 x 3⁄8-in. (32 lb)
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
218
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Vibration-Free Tables
Vibration-Free Workstation
●
●
●
●
●
●
Vertical and horizontal vibration isolation
High performance Active-Air Suspension
Automatic leveling
VibraDamped Steel
Class 100 Cleanroom compatible
Leveling feet
M ICROMAN I PU LATORS
All buildings vibrate — activities of people, machinery, heating and
ventilation systems, and nearby truck or rail traffic cause all types of
vibrations. These vibrations, though, acceptable to occupants, cannot
be tolerated by equipment used in patch clamping, cell injection,
analytical balances, and optical microscopes. The short-term effects of
such vibrations include inconsistant and unreliable performance. The
long-term effects are excessive wear, maintenance, and fatigue failures.
In order to protect sensitive instruments and equipment from faulty
operation or failure this vibration must be significantly reduced. This
can be efficiently accomplished by using Vibration-Free Platform and
Vibration-Free Workstation.
Additional tabletop sizes and
finishes are available, as well as
optional accessories such as side
rails and casters.
Call for more information
and prices for the
configuration you require.
VFW9101-xxxx Vibration-Free Workstation
VIBRATION-FREE TABLE SPECIFICATIONS
VFP
VFW
2.3 Hz
1.9 Hz
MINIMUM LOAD @ 20 psi
Vertical Natural Frequency
Isolation Efficiency @ 5 Hz
52%
70%
Isolation Efficiency @ 10 Hz
83%
90%
2.9 Hz
2.2 Hz
Horizontal Natural Frequency
Isolation Efficiency @ 5 Hz
40%
64%
Isolation Effieciency @ 10 Hz
92%
90%
2.1 Hz
1.5 Hz
85%
MAXIMUM LOAD @ 80 psi
Vertical Natural Frequency
Isolation Frequency @ 5 Hz
70%
Isolation Frequency @ 10 Hz
91%
97%
1.8 Hz
1.2 Hz
Horizontal Natural Frequency
Isolation Efficiency
81%
91%
Isolation Efficiency
95%
97%
Note: Typical performance efficiencies are for microdistubances
NET LOAD CAPACITY at 80 psi
216 lb (98 kg)
800 lb (363 kg)
Vibration-Free Platform
● Unmatched price and performance
● Low profile Active-Air designs
● VibraDamped construction
● Low natural frequency
● Excellent horizontal isolation
● SPILLPRUF spill management
● Class 100 Cleanroom compatible
VFP
Vibration-Free Platform
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
219
Microscopes and Cameras
Surgical Microscopes
PSMB Binocular SurgioScope, floor stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221
PSMT Trinocular SurgioScope, floor stand, video adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221
Stereomicroscopes
MICROSCOPES, CAMERAS
PZMIV Precision Stereo Zoom Microscope (Model IV), Binocular. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 222
PZMTIV Precision Stereo Zoom Microscope (Model IV), Trinocular. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 222
PZMTIV-CCTV Precision Stereo Zoom Microscope Video System (Model IV). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 222
PZMIII Precision Stereo Zoom Microscope (Model III). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224
PZMTIII Precision Stereo Zoom Trinocular Microscope (Model III). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224
Inverted Microscopes
INV-101 Trinocular Inverted Microscope. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226
Upright Microscopes
GPL-T Research Grade Microscope. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227
W30S Professional Grade Microscope. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227
Microscope Cameras and Photo/Video Adapters
Digital Microscope Cameras, USB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230
Color CCD Video Camera. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231
Eyepiece Adapters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231
Illuminators and Optical Fiber Light Guide
NOVAFLEX Fiber Optic Illuminator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228
Miscellaneous
Air-Therm ATX Heater Controller. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 229
FluoroDish™ Glass-Bottom Sterile Cell Culture Dishes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 232
Cover Slips. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233
Microscope Slides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
220
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Precision
SurgioScope
5
h
t
n
wi atio
w c
No gnifi ps!
ma ste
Ideal for small
animal surgery
SURGIOSCOPE Specifications
TOTAL MAGNIFICATION........................................................... 1.8× — 40×
ADJUSTABLE DIOPTER.............................................................. ± 6 Diopter
ADJUSTABLE INTERPUPILLARY DISTANCE ........................ min. 50 mm — max. 70 mm
MICROSCOPES, CAMERAS
WORKING DISTANCE ............................................................... 94 mm — 344 mm
EYEPIECE....................................................................................... 12.5x
LENS CHARACTERISTICS
Objective
Focal
Distance
Working
Distance
Total
Magnification
Field of View
F100 (Optional)
100 mm
94 mm
6.4× 10× 16×
26× 40×
33 mm, 20.5 mm,
13 mm, 8 mm, 5 mm
F200 (Included)
200 mm
195 mm
3.2× 5× 8×
13× 20×
58 mm, 38 mm, 24 mm,
15 mm, 10 mm
F250 (Optional)
250 mm
246 mm
2.6× 4× 6.4×
10.4× 16×
72.5 mm, 47.5 mm,
30 mm, 19 mm, 12.5 mm
F300 (Optional)
300 mm
294 mm
2× 3.3× 5.3×
8.6× 13.3×
87 mm, 57 mm, 36 mm,
22.5 mm, 15 mm
F350 (Optional)
350 mm
344 mm
1.8× 3× 4.5×
7.5× 11.5×
99 mm, 65 mm, 42 mm,
27 mm, 17 mm
Objectives
FINE FOCUS ADJUSTMENT RANGE...................................... 30 mm
Working Height (Arm Movement Range Above Floor)
89 cm Post........................... Focus on specimens 34.5" (88 cm) to 51" (130 cm) above floor *
103 cm Post......................... Focus on specimens 40.5" (103 cm) to 57" (146 cm) above floor *
* Subtract Working Distance for height above specimen, 103 cm post recommended for F350 objective.
Features:
● Motorized focusing
system, allows handsfree operation.
● Light weight, compact
and easy to maneuver.
Weighs only 70 lb.
● Dual bulbs prevent
illumination failure
during surgery.
● Optional video adapter.
● Improved view field.
● Convenient handles.
● Five magnification
steps.
RANGE OF MOTION
Maximum Stretch Radius of Arm................................... 870 mm
Vertical Movement Range................................................. 700-1100 mm
Adjustable Range of Small Arm...................................... 30 mm
ILLUMINATION
Dual lamp housing with quick-change spare and internal coaxial fiber optic cable.
HALOGEN-TUNGSTEN LAMP.................................................. 12V, 100W, with cold reflection
OPTIONAL CAMERA 1
/2” CCD camera (e.g., COLCAM (75%) or DC2000M (57%))
POWER.......................................................................................... 110V, 50-60 Hz, or 220V, 50-60 Hz
SHIPPING WEIGHT.................................................................... 94 lb (43 kg)
WPI’s improved precision SurgioScope (now
with five magnification steps) is a portable high
quality surgical microscope offering outstanding
image quality and value. Incorporating an agile
extension arm and excellent working distance
objectives, the SurgioScope provides convenient
movement and maneuverability necessary for
accurate positioning. These important features,
together with a high quality optical system,
provide sharp image contrast and enhanced
large field of vision. The SurgioScope comes
fully equipped with a foot-controlled motorized
focusing system, normally only found in more
expensive surgical microscopes. A unique dual
lamp housing enables safe and rapid changing
of the lamp during an operation, without
the need to power down. The optional video
port on the “T” version permits operational
procedures to be monitored or recorded
simultaneously using a video recorder and a
PSMB5
PSMT5
COLCAM video camera or digital stills with
DC2000M The mobility of the DC2000M is
limited to 2.5 m (7 ft.) by its USB cable.
Binocular SurgioScope, F200 objective (Specify post height.)
Trinocular SurgioScope, beam splitter, std video adapter, F200 objective (Specify post height.)
Specify 89 cm or 103 cm post — Specify line voltage
OPTIONS AND ACCESSORIES
1
501636
/2" CS-mount Adaptor (requires Beam Splitter 501637)
501637
Beam splitter
501669
Objective lens F100 501638
Objective lens F250
501639
Objective lens F300 501640
Objective lens F350 500162
Replacement lamp, 12V, 100 W Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
221
Precision Stereo ZOOM Microscope
● Modular, two parallel
beam design
MICROSCOPES, CAMERAS
● Planachromatic objectives,
no optical distortion
● High-contrast imaging,
ideal for observing
transparent, low-contrast
objects
All PZ
M
micro IV and PZ M
scope
TIV
s co
10x ey
epiece me with
s, buil
1x aux
t-in
iliary
lens, a
light r
nd
ing ad
apter.
COLCAM Video Camera
or DC2000M digital
camera available
separately
#500028 Camera Coupler,
available separately
● Large zoom ratio: 8:1
● Large zoom range: 0.62x
to 5.0x
● Long working distance
● Step and continuous zoom
● 5-year warranty
The fourth generation of WPI’s precision
stereo zoom microscopes uses modular, two
parallel beam path design and high quality
optical system. The advanced optical design
with planachromatic objectives provides sharp
and distortion-free contrast image throughout
the entire zoom range and comes with an
impressive 5-year warranty.
The PZMIV is available in a binocular or
trinocular version. In addition, an extensive list
of optional accessories is available that makes
the PZMIV suitable for integrated optical and
biological research.
The microscope comes with a track stand,
standard 10x eyepieces (wide-field, distortionfree and high eye point), 1x planachromatic
distortion-free objective. See the Table on next
page for all optical options.
Shown: PZMTIV with
COLCAM and 0.5X
c‑mount adapter
(camera and c-mount
not included)
The trinocular version is
a true trinocular, with
continuous operation of
both eyepieces and photo
tube simultaneously. There
is no need to block the right
eyepiece to use the photoport.
Max. Working
Distance: 25 cm
502160
Lighted Fan Base
PZMIV
Precision Stereo Zoom Binocular Microscope (Model IV), on Track Stand
PZMIV-BS
PZMIV Microscope on Boom Stand PZMTIV
Precision Stereo Zoom Trinocular Microscope (Model IV), on Track Stand
PZMTIV-BS
PZMTIV Microscope on Boom Stand
PZMTIV-CCTV
PZMTIV Microscope Video System, including PZMTIV, COLCAM Color Video
Camera, 0.5x CCD Camera Coupler, Novaflex Optical Illuminator, Bifurcated Optical Fiber Light
Guide, and 13” Color TV Monitor (NTSC format)
PZMTIV-BS-CCTV PZMTIV Microscope Video System on Boom Clamp Stand
Please see web site for complete configurations
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
222
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
PZMIV
21 in.
#502007
Articulated Arm
15 in.
PZMTIV-BS
MICROSCOPES, CAMERAS
Clamp opens to
50 mm max.
Base 11.25 x 10.25 in.
PZMIV & PZMTIV Eyepieces and Objectives
10x Eyepiece
16x Eyepiece
20x Eyepiece
25x Eyepiece
Objective
Mag
Field (mm)
(Video Field)
Mag
Field (mm)
(Video Field)
Mag
Field (mm)
(Video Field)
Mag
Field (mm)
(Video Field)
Working
Distance
0.32x
1.9x - 16x
106 -13.1
(49.8 - 6.1)
3.2x 25.6x
70.6 - 8.8
(49.8 - 6.1)
3.9x - 32x
55.4 - 6.9
(49.8 - 6.1)
5x - 40x
45.4 - 5.6
(49.8 - 6.1)
296 mm
0.5x
3.1x - 25x
67.7 - 8.4
(31.8 - 3.95)
5x - 40x
45.2 - 5.6
(31.8 - 3.95)
6.2x - 50x
35.5 - 4.4
(31.8 - 3.95)
7.8x - 62.8x
20 - 3.6
(31.8 - 3.95)
187 mm
0.63x
3.9x
- 31.5x
53.8 - 6.7
(25.3 - 3.15)
6.2x
- 50.4x
35.8 - 4.4
(25.3 - 3.15)
7.8x -63x
28.2 - 3.5
(25.3 - 3.15)
9.8x - 78.8x
23 -2.9
(25.3 - 3.15)
149 mm
1.0x (inc)
6.2x - 50x
33.9 - 4.2
(15.9 - 1.97)
9.9x - 90x
22.6 - 2.8
(15.9 - 1.97)
12.4x
- 100x
17.7 - 2.2
(15.9 - 1.97)
15.5x
- 125x
14.5 - 1.8
(15.9 - 1.97)
80 mm
The Video Field is based on a 1/2-inch CCD (8 mm diagonal) and a 0.5x camera adapter.
OPTIONAL ACCESSORIES
502000
PZMIV Binocular Body With 10X Eyepieces, 1X Objective, Eye guards
502001
PZMTIV Trinocular Body With 10X Eyepieces, 1X Objective, Eye guards
502004 Boom Stand W/O Focus Mount (requires 502009 Focus Mount for PZMIV)
502005 Ball Bearing Boom Stand W/O Focus Mount (requires 502009 Focus Mount for PZMIV)
502006 Boom Clamp Stand (requires 502009 Focus Mount for PZMIV)
502007 Articulated Arm and Table Clamp w/o Focus Mount (requires 502009 Focus Mount for PZMIV)
502009 Universal Focus Mount for 76 mm PZMIV (Required for BS, AAC, BBS, and BCS) (5/8” pin)
502160
Lighted Fan Base, Fluorescent base, Tungsten Halogen beam
502010 10X Wide Field Eyepiece for PZMIV (pair)
502011 16X Wide Field Eyepiece for PZMIV (pair)
502012 20X Wide Field Eyepiece for PZMIV (pair)
502013 25X Wide Field Eyepiece for PZMIV (pair)
502015 Ring Light Adapter for PZMIV (For R-8-8-WPI01 Ring Light Guide)
502016 0.32x, Planachromatic Objective (Distortion-free) (296 mm WD)
502017 0.50x, Planachromatic Objective (Distortion-free) (187 mm WD)
502018 0.63x, Planachromatic Objective (Distortion-free) (149 mm WD)
502019 1.0x, Planachromatic Objective (Distortion-free) (80mm WD)
500261 0.35x CCD Camera Coupler, C-Mount (Use with USBCAM33)
500262 0.5x CCD Camera Coupler, C-Mount (Use with COLCAM)
500028 1x CCD Camera Coupler, C-Mount (Use with COLCAM)
502163 Wall Mount Plate for Articulated Arm System
NOVA NOVAFLEX Fiber Optic Illuminator
500186 Bifurcated Light Guide with Lenses
R-8-8-WPI01
Ring Light Guide
NOVA-186 NOVAFLEX Fiber Optic Illuminator with Bifurcated Light Guide and Lenses
EJA
Replacement Lamp for NOVAFLEX
502167
Replacement Fluorescent lamp for Lighted Fan Base (502160)
502168
Replacement Tungsten Halogen lamp for Lighted Fan Base (502160)
COLCAMNTSC Video Camera 1/2" CCD (8 mm diagonal)
COLCAMPAL Video Camera 1/2" CCD (8 mm diagonal)
DC2000M
Digital Camera 1/3" CCD (6 mm diagonal)
CCD Camera
Couplers — C-Mount,
available as 0.3x,
0.5x and 1x.
PZMIV SPECIFICATIONS
EYEPIECES
WFH 10×
AUXILIARY LENSES
1×
ZOOM RANGE
0.62× - 5×
TOTAL MAGNIFICATION
6.2× - 50×
ZOOM RATIO
8:1
FIELD OF VIEW
∅33.9- ∅4.2 mm
WORKING DISTANCE
80 mm
BINOCULAR TUBE
Inclined 45°
INTERPUPILARY DISTANCE
50 – 75 mm
DIOPTER ADJUSTMENT
± 5 Diopter
MICROSCOPE BODY
Rotatable 360°
OPTIONAL ACCESSORIES
Eyepieces
16×, 20×, 25×
Auxiliary lenses
0.32×, 0.5×, 0.63×
Total Magnification
1.9× - 125×
Field of view
∅106 - ∅1.8 mm
Working Distance
80 – 296 mm
SHIPPING WEIGHT
23 lb.
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
223
MICROSCOPES, CAMERAS
Precision Stereo ZOOM Microscope
Quality
and
Precision
to Improve
Your Vision
PZMTIII-CCTV
(NTSC format)
WPI’s third-generation stereomicroscope, PZMIII, is an
ideal tool for tissue dissection, cell injection, specimen
manipulation, electrode inspection, and many other
applications that require a magnified, stereo viewing and
ample working distance. It offers the leading brand’s quality
and performance at an affordable price. Advanced optics
provide the sharpest image that can only be found among
the best of this class. It is superior to many stereomicroscopes
costing almost twice as much. Zooming is achieved by
a spring-loaded nub that is smooth and effortless. The
compact size and light weight make it more stable and easily
manipulated on the boom stand. A specially designed photo/
video module can easily upgrade the binocular PZMIII to a
trinocular microscope at any time for photo, video, or digital
imaging. In addition, an extensive list of optional accessories
is available that can make the PZMIII suitable for almost any
bio-research applications requiring a stereomicroscope. See
next page for options.
Monitor may
vary from
pictured.
Actual base wider
than pictured here. See
example at left.
NEW LOW
PRICES!
PZMIII
PZMIII Precision Stereo Zoom Microscope (Model III), on Post Stand
PZMIII-BS
PZMIII Microscope on Boom Stand PZMIII-AAC PZMIII Microscope on Articulated Arm with Table Clamp PZMTIII
Precision Stereo Zoom Trinocular Microscope (Model III)
PZMTIII-CCTV PZMTIII Microscope Video System, including PZMTIII, Colcam Color Video Camera, 0.5X CCD Camera Coupler, Novaflex Optical Illuminator, Bifurcated Optical Fiber Light Guide, and 13" color TV monitor (NTSC format)
PZMTIII-BS
PZMTIII Microscope on Boom Stand
PZMTIII-AAC PZMTIII Microscope on Articulated Arm with Table Clamp
PZMTIII-BS-CCTVPZMTIII Microscope, Boom Stand, Video System
PZMTIII-AAC-CCTV PZMTIII Microscope, Articulated Arm, Video System
COLCAMNTSC Video Camera 1/2" CCD (8 mm diagonal)
COLCAMPAL Video Camera 1/2" CCD (8 mm diagonal)
All PZMIII and PZMTIII microscopes come with 10x eyepieces
and built-in 1x auxiliary lens.
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
224
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
PZMIII
#502163 Wall-Mount Plate —
Mount the microscope on the
wall for convenient storage
when space is tight.
40 cm
MICROSCOPES, CAMERAS
PZMIII-BS
#502005 Ball Bearing Boom
Stand — Dual Arm Ball Bearing Boom
Stand for increased stability and
smoother horizontal movements.
#502007
Articulated Arm
qwertyuiopas
PZMIII Eyepieces and Objectives
10x Eyepiece
Objective
Mag.
0.3x
2x - 13.5x
0.5x
3.4x - 22.5x
0.75x
5x - 33.8x
1.0x
6.7x - 45x
1.5x
10x - 67.5x
2.0x
13.4x - 90x
Field (mm)
(Video Field)*
114 - 17
(53.6 - 8)
69 - 10
(32.4 - 4.7)
45 - 7
(21.1 - 3.3)
34 - 5
(16 - 4.7)
23 - 3.4
(10.8 - 1.6)
12 - 2.5
(5.6 - 1.17)
15x Eyepiece
Mag.
3x - 20.3x
5x - 33.8x
7.5x - 50.6x
10x - 67.5x
15x - 101.3x
20.1x - 135x
Field (mm)
(Video Field)*
84 -13
(53.6 - 8)
51 - 7
(32.4 - 4.7)
34 - 5
(21.1 - 3.3)
25 - 3.7
(16 - 4.7)
17 - 2.5
(10.8 - 1.6)
13 - 1.8
(5.6 - 1.17)
20x Eyepiece
Mag.
4x -27x
6.7x - 45x
10x - 67.5x
13.4x - 90x
20.1x - 135x
26.8x - 180x
Field (mm)
(Video Field)*
69 - 10.3
(53.6 - 8)
42 - 6.2
(32.4 - 4.7)
28 - 4.2
(21.1 - 3.3)
21 - 3.1
(16 - 4.7)
14 - 2.1
(10.8 - 1.6)
10 - 1.5
(5.6 - 1.17)
25x Eyepiece
Mag.
5x - 33.8x
8.4x - 56.3x
12.6x - 84.4x
16.8x - 112.5x
25.1x - 168.8x
33.5x - 225x
Field (mm)
Working
(Video Field)* Distance (mm)
44.8 - 6.7
(53.6 - 8)
26.9 - 4.0
(32.4 - 4.7)
17.9 - 2.7
(21.1 - 3.3)
13.4 - 2.0
(16 - 4.7)
9.0 - 1.3
(10.8 - 1.6)
6.7 - 1.0
(5.6 - 1.17)
287 mm
177 mm
#501381
0.5x C-mount
CCD Camera
coupler — Use
with cameras
which have
0.5‑in. CCD.
117 mm
100 mm
47 mm
26 mm
* The video field of view is based on a 1/2-inch (8 mm diagonal) CCD camera and a 0.5x camera adapter.
OPTIONAL ACCESSORIES
501352
PZMIII Binocular Body, pair of 10x eyepieces and eyeguards
13338 Ring Light Adapter NOT included
501353
Fan Post Stand with 76mm Focus Mount
502009
Universal Focus Mount, 76 mm ID for PZMIII Body
502004
Boom Stand without Focus Mount
502005
Ball Bearing Boom Stand without Focus Mount
502007
Articulated Arm with Table Clamp, without Focus Mount 502163
Wall-Mount Plate, 6” x 6” (or 15.24 cm x 15.24 cm)
501367
Universal Focus Mount, 83mm ID for PZM Body
501369
Wide Field 10x Eyepieces (pair)
501370
Wide Field 15x Eyepieces (pair)
501371
Wide Field 20x Eyepieces (pair)
501372
Wide Field 25x Eyepieces (pair)
501373
0.3X Long Working Distance Objective Lens
501375
0.5x Long Working Distance Objective Lens
501376
0.75x Long Working Distance Objective Lens
501377
1.5x Long Working Distance Objective Lens
501378
2.0x Long Working Distance Objective Lens
501379
PZMTIII Trinocular Body, pair of 10x eyepieces and eye guards
13338 Ring Light Adapter NOT included
501381
0.5x C-Mount CCD Camera Coupler
13338
Ring Light Adapter for PZMIII Series
(included with all microscope configurations on previous page)
503051
Manual Stage for PZMIII 500264
Reticle in 10x Eyepiece, 30 mm version, 100 divisions per mm
500266
Reticle in 20x Eyepiece, 0-90°, 200 divisions per mm
503102
76mm Rectangular Base Post Stand for PZMIII
#503051 Manual Stage — Mounts in the
circular opening in the PZMiii base. XY travel
distance: 75 x 56 mm. Glass size: 116 x 96 mm.
Active diameter: 37.6 mm. Dimensions: 180 x
155 x 27 mm. Fits 503102 base only.
PZMIII SPECIFICATIONS
EYEPIECES
ZOOM RANGE
TOTAL MAGNIFICATION
FIELD OF VIEW
WORKING DISTANCE
BINOCULAR TUBE
INTERPUPILLARY DISTANCE
DIOPTER ADJUSTMENT
MICROSCOPE BODY
AUXILIARY LENSES
Total magnification
Biggest Field of View
Working Distance
SHIPPING WEIGHT
WFH 10x
0.67x - 4.5x
6.77x - 45x
∅ 34 MM - ∅ 5 MM
100 mm
Inclined 45°
Adjustable 47-70 mm
±5 Diopter (both eyepiece tubes)
Rotatable 360°
2x - 225x ∅ 110 mm
26-287 mm
23 lb.
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
225
Inverted Trinocular Microscope
Video camera
available separately —
see page 210.
Trinocular Head
Condenser
Ideal for video/photography
Abbe condenser with
20X phase
Centering eyepiece for phase
objective
Racks
EW 10X /22 extra wide field
eyepieces
Adjustable condenser rack
MICROSCOPES, CAMERAS
Adjustable illuminator rack
Stage
160 x 260 mm
Inserts: 35 mm
round, 50 mm round,
87x46 rectangular
Auxiliary stage,
70 x 180 mm
Coaxial drive controls
Optional mechanical
stage: X-Y coaxial
control; 120 x 78 mm
range of traverse
Nosepiece
Quintuple nosepiece
Objectives
Infinity Optical System
Objectives: Plan 4X and
40x, Plan Phase 10x and
20x
Illumination
6V/30W halogen bulb
Fixed Stage
Focus
Optics move during
focusing - excellent for
patch clamp and brain
slice recording
Coarse adjustment: range of 37.7mm
Fine adjustment: 0.2mm per rotation
Vertical objective movement
Accessories Included
Green, blue and neutral filters, dust cover, immersion oil.
Options
Multiple photo options
Weight
24 lb (10.9 kg)
INV-101
Trinocular Inverted Microscope
503510
30 mm 10X Eyepiece with 100/10 reticle
503520
Replacement lamp
503512
Deluxe Optical Cleaning Kit
All necessary tools are included for routine adjustments, alignments, and
assembly: 8 oz. Air Duster, 280 sheets lint-free lens paper, 1 oz. “no-residue”
lens cleaning fluid, 100 cotton-tipped applicators, 9x9 microfiber lens cloth,
soft-bristled dusting brush, micro-glide gear lubricant, allen wrenches, doublesided friction collar wrench, precision screwdriver set, nylon carry case
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
226
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
ResearchGrade
Microscope
The GPL-T Modular Lab Scope features exceptional optical quality and
expandability for top-notch performance in the lab. The 10x/20 high-point
Plan eyepieces on super-wide eyetubes offer an extremely broad field of
view, with ample eye relief for users who wear eyeglasses. The Infinity
Plan optics match quality with value within any lab’s budget.
GPL-T SPECIFICATIONS
True Trinocular (Seidentopf) with 0.40x C-mount
Diopter adjustment
Inclined 30°, rotates 360°
10X/20 high point eyepieces
Interpupillary distance range 50-75 mm
NOSEPIECE
Reverse quadruple nosepiece
OBJECTIVES
Infinity Plan
4X, 10X, 40XR, 100XR (oil)
Anti-fungal, parfocal, parcentric, color-coded
STAGE
Mechanical stage (160 mm x 140 mm)
XY Movement: 77 mm x 50mm
Slow-close hydraulic slide finger, Dual slide holder
FOCUS
Coarse adjustment: range of 20 mm
Fine adjustment: graduation of 2 μm
ILLUMINATION Koehler Illumination, Moveable Abbe condenser, NA 1.25
Dual Iris diaphragms
Variable Halogen light source (12V/20W bulb)
Input 90-240V / 50-60Hz automatic switching
Camera not included
GPL-T
503510
503511
503512
Research Grade Microscope Trinocular
30 mm 10X Eyepiece with 100/10 reticle
Replacement lamp
Deluxe Optical Cleaning Kit
All necessary tools are included for routine adjustments, alignments, and assembly:
8 oz. Air Duster, 280 sheets Lint-Free Lens Paper, 1 oz. “No-Residue” Lens Cleaning
Fluid, 100 Cotton-Tipped Applicators, 9x9 Microfiber Lens Cloth, Soft-Bristled Dusting
Brush, Micro-Glide Gear Lubricant, Allen Wrenches, Double-Sided Friction Collar
Wrench, Precision Screwdriver Set, Nylon Carry Case
W30 Professional-Grade
Microscope
The W30 professionalgrade microscope is a
best-seller in universities,
medical schools, and
reseach laboratories.
Equipped for performance,
its features include
titanium-finished DIN
or Semi-Plan optics and
a 30-year anti-fungal
coating. The W30 is
the choice for superior
performance at a great
price.
ACCESSORIES INCLUDED
One 2-amp fuse, spare 12V/20W bulb, blue, green,
and yellow filters, dust cover, immersion oil, manual
and warranty card
DIMENSIONS AND WEIGHT
16.5” (42cm) x 10.625” (27cm) x 7.875” (20cm)
19.5 lb. (9 kg)
W30S SPECIFICATIONS
HEAD
Binocular (Seidentopf)
True Trinocular
Inclined 30°, rotates 360°
Dual diopter adjustment, Interpupillary distance range 55-75 mm
10X/18 wide field eyepieces
NOSEPIECE
Quadruple forward-facing nosepiece
OBJECTIVES
DIN Plan, anti-fungal
4X, 10X, 40X, 100XR (oil)
Parfocal, parcentric, color-coded
Mechanical stage (140 mm x 140 mm)
STAGE
Coaxial drive controls
XY Movement: 73 mm x 43 mm
FOCUS
Coarse adjustment: range of 30 mm
Fine adjustment: graduation of 2 μm
Tension control knob
ILLUMINATION
Moveable Abbe condenser, NA 1.25,
Iris diaphragm
Variable halogen light source (12V/20W bulb)
110V/220V switchable electronics
ACCESSORIES INCLUDED
Three 0.5 amp fuses, mirror attachment (for field use), blue and green filters, dust cover, immersion oil, spare bulb
DIMENSIONS AND WEIGHT
15” (38 cm) x 9” (23 cm) x 7” (17.8 cm)
14 lb. (6.4 kg)
W30S
W30ST
503513
503514
Binocular Microscope
Trinocular Microscope
21 mm 10X Eyepiece with 100/10 reticle
Replacement Lamp
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
227
MICROSCOPES, CAMERAS
GPL-T
HEAD
MICROSCOPES, CAMERAS
High intensity
source for
fiber optic
illumination
The NOVAFLEX Fiber Optic Il­lu­mi­
na­tor provides reli­able, un­in­ter­rupt­ed
high-intensity light for micro­scopes
and fiber op­tic spectrometers.
The most wide­ly used halo­gen
light source, NOVAFLEX allows a
continuous range of subdued or
concentrated light­ing controlled by
a rotary dim­mer on the front panel.
NOVAFLEX may be used with a ring
light and single or bi­fur­cat­ed flex­i­
ble fiber bundles, en­abling the light
beam to be placed ex­act­ly where
need­ed. Forced air cool­ing prolongs
lamp life. EJA lamp color temper­a­
ture is 3350°K. An interlock switch
automatically cuts off power when
front panel is opened to replace bulb.
Rugged alu­mi­num case.
21" (53 cm)
Bifurcated Light
Guide 500186
available
separately
Size: 24 x 13 x 16 cm (9.375 x 4.75 x
6.25 in.)
Weight: 4.8 kg (9 lb)
NOVA
NOVAFLEX Fiber Optic Illuminator (115 V, 60 Hz)
NOVA-Z
NOVAFLEX Fiber Optic Illuminator (230 V, 50 Hz)
NOVA-186 NOVAFLEX Illuminator & Bifurcated Light Guide
LIGHT GUIDES AND ACCESSORIES
500186
Bifurcated Light Guide (with lenses)
R-8-8-WPI01 Ring Light Guide for PZM and PZMIII Series*
*Requires adapter #13338 for use with PZM, PZMII and PZMIII.
13338*
Ring Light Adapter (48 mm ∅) for PZM, PZMII, PZMIII
502015* Ring Light Adapter for PZMIV
SI-72-8 Flexible Light Guide, 72 in. (183 cm) Requires L-32-32
SI-40-8 Flexible Light Guide, 40 in. (102 cm) Requires L-32-32
L-32-32 Lens for SI-40-8 and SI-72-8
5475
Adapter for SMA-terminated Fiber Optic Cables
EJA
Replacement Lamp, 150 Watt
* A ring light adapter is included with each PZMIII and PZMIV microscope.
Flexible light guides SI-72-8 and SI-40-8 are not self-supporting
NOVA Specifications

Lamp
150 W quartz halogen
Size
24×13×16 cm (9.375×4.75×6.25 in.)
Power
115 VAC, 50/60 Hz, 3 A
Weight
4.8 kg (9 lb)
Light guides
available separately
 Flexible Light Guides SI-40-8 and SI-72-8, with
8 mm diameter fiber and non-metallic sheath,
are suitable for use in a Faraday cage. (Lens L-3232 available separately.)
ID: 58 mm
 Ring Light R-8-8-WPI01 can be used with PZM
Stereo Microscope for shadow-free illumination.
18-in. (46 cm) flexible cable

L-32-32
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
228
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Precision Heater Controller
Smart, electrically quiet air heater for live cell
imaging systems and custom incubators
Maintenance of the desired
temperature set-point can
now be achieved through the
use of a precision, shielded
temperature probe coupled to
a peripheral Air-Therm heating
unit.
Glass Bottom Dishes: For high numerical aperture (NA) live-cell
imaging, cells must be plated on glass (e.g., WPI’s FluoroDish Glass
Bottom Dishes, spotting 0.17 mm glass thickness) or standard cover slips.
Since cover slips inherit other problems associated with sterility and
accidental damage to expensive microscope condensers, WPI designed
new and improved glass bottom dishes (35 mm x 10 mm or 35 mm X
22 mm) that are not cytotoxic. A special adhesive in conjunction with an
advanced dish design makes the FluoroDish the only non-cytotoxic glass
dish in the world. (See page 210.) This means that cells can actually be
AIR-THERM SPECIFICATIONS
AIR FLOW RATE
20 to 50 CFM (0.55 to 1.4 cubic meter/M)
CONTROL TEMP. RANGE
Ambient to 60°C
TEMPERATURE RESOLUTION
0.1 °C
TEMPERATURE ACCURACY
0.2 °C
CONTROL MODES
(a) Auto (PID set manually, or Self-Tune)
(b) Manual tune
ANALOG OUTPUT FOR CHART RECORDER
0.5°C resolution
0-10V, 0 to 100 C (default, adjustable via controller)
HEATING VOLUME
More than 4 cu ft (85 liter), non-circulating
POWER (CE)
300 W, 95-135 V or 220-240 V, 50/60 Hz
DIMENSIONS
61⁄2 x 8 x 71⁄2 in. (15.5 x 21 x 19 cm)
SHIPPING WEIGHT
10 lb (4.5 kg)
cultured for 4 to 5 days in the same dish and then carry the complete
cell culture with media from the incubator directly into the (Air-Therm
controlled) recording chamber. This is a comfort level that hitherto was
unattainable by scientists and clinical researchers since cells will have
to be transported from the culture dishes on to cover slips just prior to
imagery or attaching patch electrodes.
Chamber: The most problematic aspect of any live cell imaging
procedure or patch clamp approach is the thermal drift of high
magnification lenses caused by temperature fluctuations in the
microscope's environment. It is necessary to constantly readjust the focus
during image acquisition due to this thermal-drift, introducing artifacts
during quantitative microscopy due to the photo-bleaching that occurs
during refocusing. The optimal solution to this problem is to use WPI’s AirTherm temperature controller connected to a Plexiglas or acrylic chamber
that encloses the entire imaging area (or at least the objectives and the
stage). Using such a chamber will result in highly stable temperature
control and minimal thermal drift.
AIRTHERMY-ATXAir-Therm Heater 120 V, U.S.
AIRTHERMZ-ATXAir-Therm Heater 240 V Specify line cord
2 pieces of 4.5 ft clear, coil-reinforced heater hose included with Air-Therm.
Specify Line (Mains) Voltage
OPTIONAL ACCESSORIES
15590
Clear hose, 2.5” diam., 4.5 ft
300276
Replacement platinum temperature probe
3491
5 ft (1.5m) probe extension cable
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
229
MICROSCOPES, CAMERAS
Precision: Noise is a major
concern in any experimental
application. WPI's Air-Therm™
is electrically quiet as well
as acoustically quiet). Since
the Air-Therm can be placed
away from the incubator,
any residual electrical and
vibrational interference
from the heater is virtually
eliminated. Accuracy of ±0.1°C
can be routinely maintained at
the sample site (using a fully
programmable differential
algorithm to automatically
adjust the temperature on
the Air-Therm unit). AirTherm maintains a uniform
temperature across the
microscope stage (allowing for
uniform heating of multiwell
dishes). These tight tolerances
result in minimal focal drift
once sample/incubator equilibrium has been achieved.
Digital Microscope Cameras
MICROSCOPES, CAMERAS
USBCAM100
This high performance camera incorporates a half-inch 2048×1536
CMOS image sensor (3.1 Megapixels) capable of operating up to 12
frames per second (fps) with full resolution and at near video quality
(27 fps) at XGA (1024×768) resolution. That is nearly three times faster
than a CCD. By combining the speed of this camera and a proprietary
driver with Twain for Windows XP and Vista, you get real-time imaging.
That means no offline processing. Using USB 2.0 connectivity to transfer
images to a computer, the simple plug-and-play software allows the
resolution to be easily modified.
The USBCAM100 includes XLICap software that features:
lSimple layout with toolbar
lPan and Zoom
lSelectable image resolutions
lMirror/Flip/Rotate image
lVariety of file formats
lRecord live video
lEmail a screen shot
lOn-screen annotation and time/date stamping
lFreeze image at any time
lCopy to clipboard and paste into other applications
lAutomatic one-touch white balance
lColor or black and white mode
lSave and restore Custom Preference Profiles
USBCAM100
Digital Microscope Camera, 1/2-in. CMOS
USBCAM33 / USBCAM50
Record images directly to your computer. These digital microscope
cameras offer flexibility, with a range of configurations for image capture,
a choice of mount option (C or CS) and file output alternatives. Since both
cameras connect via the USB port, installing the image capture software is
simple. Either camera can be used on WPI’s stereo microscopes PZMTIV,
PZMTIII, compound microscopes W30ST and GPL-T and also the
PSMT5 Surgical Microscope. Choose from the one third-inch CCD with
1024×768 resolution and 30 frames per second (USBCAM33) or one
half-inch CCD with 1360×1024 resolution and 15 frames per second
(USBCAM50).
These cameras include IC Imaging Control 3.0 software that features:
lReal-time video preview
lText and graphics can be drawn on a live video stream
lScroll and Zoom
lAcquisition of single frames
lCapture pause, for intermittent image capture
lTimestamps
USBCAM33
USBCAM50
503536
Digital Microscope Camera, 1/3-in. CCD
Digital Microscope Camera, 1/2-in. CCD
Cable, USB Extension (male-female)
USBCAM33
USBCAM50
USBCAM100
IMAGE SENSOR
1/3” Sony CCD, progressive scan
1/2" Sony CCD, progressive scan
1/2-in. CMOS, 3.1 M pixels
MAX RESOLUTION
1024x768
1360x1024
2048 x 1536, 1024 x 768
SIZE
4.65 µm x 4.65 µm
4.65 µm x 4.65 µm
3.2 µm x 3.2 µm
SPEED (PC DEPENDENT)
30fps, 15fps, 7.5fps or 3.75fps
@1024x768BY8; 15fps, 7.5fps or
3.75fps @ 1024x768UYVY
15fps, 7.5fps or 3.75fps @
1280x960BY8; 7.5fps or 3.75fps @
1280x960UYVY
up to 12 fps @ 2048 x 1536; up
to 27 fps @ 1024 x 768
WAVELENGTH (nm)
450-700
450-700
400-1000
DYNAMIC RANGE
ADC: 10 bit, output: 8 bit
ADC: 10 bit, output: 8 bit
>52 dB
SENSITIVITY
0.5 lux @ 1/15 s
0.5 lux @ 1/7.5 s
1 v/lux-sec
FILE FORMAT
BMP, JPG
BMP, JPG
BMP, TIFF, JPG
EXPOSURES
Automatic/Manual
Automatic/Manual
Automatic/Manual
SHUTTER CONTROL
Automatic/Manual
Automatic/Manual
Automatic/Manual
PROGRAMMABLE CONTROL
Toolbar options for time image
sequencing and recording
Toolbar options for time image
sequencing and recording
Image size, brightness, gain,
exposure time
WORKING TEMPERATURE
-5°C ~ 45°C
-5°C ~ 45°C
-50°C ~ 70°C
INTERFACE
USB 2.0 cable
USB 2.0 cable
USB cable, 2 m
SYSTEM REQUIREMENT
Windows XP, 2000, Vista
Windows XP, 2000, Vista
Windows XP, (SP2), 2000, Vista
SOFTWARE
IC Imaging Control Software
IC Imaging Control Software
Image-processing software:
XLICap, Driver for USB 2.0
LENS MOUNT
C/CS-Mount
C/CS-Mount
C-Mount
CAMERA BODY
50.6 x 50.6 x 50 mm
50.6 x 50.6 x 50 mm
86 x 30 x 60 mm
WEIGHT
265 g (9.5 oz)
265 g (9.5 oz)
136 g (4.8 oz)
WHITE BALANCE
Automatic/Manual
Automatic/Manual
Tungsten, Fluorescent
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
230
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Color Video Camera for Microscopy
COLCAM
Specifically chosen for its high quality video
imaging and large 1⁄2” CCD (8mm), the Colcam
is the clear choice for WPI Trinocular
microscopes. This camera was
specifically detailed for use with
WPI standard C-mount couplers
to assure the quality capture of
still images and video. COLCAM
incorporates the latest CCD
image sensor for color signal
output to “NTSC” (North American)
or “PAL” (European) video systems.
COLCAM SPECIFICATIONS
Image Device
NTSC
PAL
1/2-inch CCD
1/2-inch CCD
Picture Elements
811 x 508
795 x 596
Scanning System
525 lines, 60 fields / sec
625 lines, 50 fields / sec
Min. Illumination
470 TV lines
Dimensions
35 x 35 x 42 mm (1.4" x 1.4" x 1.7")
Weight
Color CCD Video Camera, NTSC (120 V, US plug)
Color CCD Video Camera, PAL (240 V, Specify British or Euro plug)
Microscope Mount: Please specify model of microscope when requesting
a quote. If PAL is needed in 120-volt systems or NTSC in 240-volt systems,
please specify.
0.2 Lux/F1.2 (5600°K)
Resolution
COLCAMNTSC
COLCAMPAL
A high signal-to-noise ratio of
50 dB permits clear images with
low light levels. A C-mount is required
for use with microscopes. Includes a
standard tripod mount, power supply and 6-ft
BNC-terminated cable with an RCA adaptor.
(Lens not included.)
< 300 g
C-Mount Eyepiece Adapters
For 1/4-inch (4mm diagonal), 1/3-inch (6 mm diagonal) and 1/2-inch
(8 mm diagonal) video cameras and eyepiece camera conversion, this
lens and its accessories make it possible to connect a typical video or
C-mount camera to almost any microscope on the market. The lens fits
right into the ocular socket of standard 23.2 mm microscopes and the
30 mm adapter allows for use on the typical stereo zoom microscope.
If you already have a trinocular microscope you can add the included
C-Adapter to the top of an existing 1X C-mount (no lens) adapter. For a list
of 1X C-mounts for popular microscopes, visit WPI’s website and search
for “C-mounts”.
503097
Adapter, 0.45X for 1/3-in. and 1/2-in. video cameras, 30 mm Stereo adapter, 1X C-mount adapter
503098 * Adapter, 0.28X for 1/4-in. video cameras, 30 mm Stereo adapter, 1X C-mount adapter
* For adapter 503098 to mount properly, the 1/4-inch CCD camera
must have a minimum of 13 mm clearance, measured from the front
of the C-mount ring to the CCD surface.
SLR Digital Camera-to-Microscope
Eyepiece Adapter
This adapter connects T-mount SLR digital cameras to almost any
microscope on the market. The adapter is built to 23.2 mm ocular tubes
that are found on most high magnification (upright, inverted, standard)
microscopes. The 30 mm adapter allows mounting on most Stereo zoom
microscopes that use 30 mm oculars. If you already have a trincocular
microscope you can add this adapter to the top of an existing 1X C-mount
adapter. For a list of 1X C-mounts for popular microscopes, visit WPI’s
website and search for “C-mounts”
The 2X magnification of this microscope adapter yields an approximate
65% field of view from the visual field as measured on a Canon 10D
Digital camera. (CCD Sensor size = 22.7 x 15.1 mm). 35 mm film
reference size is 24 x 36 mm.
Please contact your camera dealer for a suitable T-mount to bayonet
adapter for your camera.
503099
Adapter, 2.0X for SLR digital Cameras (includes 30 mm Stereo adapter, 1X C-mount adapter )
503097
era
Cam
ed.
clud
not in
503099
503098
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
231
MICROSCOPES, CAMERAS
l Sensitivity of 0.2 lux @ f1.2
l Resolution of 470 TV lines
l No burn in, no image lag, no geometric
distortion.
l Magnetically shielded.
l Composite video out at 1 Vpp @ 75 ohms.
l Power consumption under <2W @ 12VDC
l S/N ratio 52 dB, typ., 60 dB max.
l Gamma of .45.
l Operating temperature range of –20 to 50°C.
l White balance color temperature switchable
l Includes standard tripod mount, power
supply, 6-ft (~2m) BNC cable, RCA adaptor.
FluoroDish
™
MICROSCOPES, CAMERAS
Cover-glass bottom for
observing and growing cells
in imaging related research
l Optical quality glass bottom
for better imaging quality
(RI=1.525)
l Low sample volume for
expensive chemicals
l Lowest access angle for
micropipette
l Low toxicity adhesive for
embryo research
WPI’s FluoroDish™ tissue culture dishes
are now available in a larger range of sizes
and coatings. These polycarbonate dishes
provide exceptional imaging quality for many
applications requiring the use of inverted
microscopes such as high resolution image
analysis, microinjection and electrophysical
recording of fluorescent-tagged cells. Taking
advantage of WPI’s extensive experience
with low toxicity adhesives, FluoroDish uses a
specially formulated adhesive that is optically
clear, durable and with extremely low toxicity.
Tests by an independent laboratory have shown
that the 96-hour surviving rate of embryos is
100% when kept in FluoroDish, substantially
better than some other brands. The bottom
glass has superior UV transmission (30%
transmission at 300 nm, compared to less
than 7% for the most popular German glass).
Stringent quality control ensures that glass
thickness stays within the 0.17 ±0.01 mm
range.
brighter images for fluorescence and higher
resolution in Image Analysis. The glass bottom
permits the use of immersion objectives with
medium such as water, glycerin or oil for the
highest magnification possible. To optimize
heat-exchange, WPI’s glass-bottom dish is
designed to be flush (flat) with the microscope
stage or heating unit, therefore eliminating the
air gap that exists with modified plastic dishes
in which a glass cover slip has been inserted.
Three different sizes of FluoroDish are offered,
one type of 50 mm diameter dish and two
types of 35 mm diameter dishes. An inner well
is created within the dish by the glass bottom
and the tissue culture grade polystyrene which
forms the sides of the dish. All WPI dishes have
the advantages of low toxicity and good UV
transmission bottom glass. They are individually
packed and gamma sterilized.
The 35 mm dish has outside dimensions
similar to that of a Corning 35 mm dish
and has ø23.5 mm glass window (FD35)
or ø10 mm glass window (FD3510). Most
heaters and perfusion adapters designed
for the Corning 35 mm dish will also fit this
H
dish. The 23.5 mm glass window dish is
available uncoated, poly-D-lysine-coated, or
collagen-coated. Certain types of cell lines
Conventional plastic dishes and chambers
limit the utility of the inverted scope for many
applications because the thick plastic bottom
requires a long working distance objective
available only in lower magnifications. Each WPI
dish has a flat (0.17 mm thick) optical quality
glass bottom, allowing the use of a much
shorter objective working
distance, larger numerical Part Number
ID (mm
aperture (NA), and a
FD35
33
higher magnification
FD3510
10
(up to 100x). The
FD5040
47.5
larger NA and higher
magnification provide
superior quality imaging
for both classical
FD35-100
FluoroDish Sterile
and fluorescence
FD35COL-100 FluoroDish Sterile
microscopy. Higher
FD35PDL-100 FluoroDish Sterile
effective NA yields
FD3510-100
FluoroDish Sterile
FD5040-100 FluoroDish Sterile
(e.g., PC3 and HEK) adhere well to the uncoated
glass bottom dish. The poly-D-lysine coating
has been reported to improve the adhesion
of neuron cells, and type I rat tail collagen
has been reported to improve the adhesion of
muscle cells. The users can also apply to the
uncoated dish any special coating that is best
for their cell line.
The 10 mm glass window dish (FD3510) has
low sidewall for easy microelectrode access and
low solution volume. The low microelectrode
access angle is the lowest among all of 35 mm
dishes on the market (very close that of a 50
mm dish). The dish needs only 100 ~ 200 mL
to cover the bottom well, an important feature
when using expensive drugs and chemicals.
The 50 mm dish (FD50) has a large growth
area (35 mm well diameter), a low access
angle for microelectrodes, and grips for easy
handling.
OD
ID
Access
Angle
h
Glass Ø
OD (mm)
35.5
35.5
49.82
Glass Ø (mm)
23.5
10
35
height (inside)
7.8
1.5
7.25
Height (outside)
9
4.65
7.4
Access Angle
29°
17°
17°
l Choose from poly-D-lysine or collagen coated, or uncoated
Culture
Culture
Culture
Culture
Culture
Dish,
Dish,
Dish,
Dish,
Dish,
clear wall, 35 mm, 23 mm well, box of 100
Collagen Coated, clear wall, 35 mm, 23 mm well, box of 100
Poly-D-Lysine Coated, clear wall, 35 mm, 23 mm well, box of 100
clear wall, 35 mm, 10 mm well, low sidewall, box of 100
clear wall, 50 mm, 35 mm well, box of 100
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
232
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
These cover slips made of German glass
can be used for growing and culturing
cells that normally have poor adhesion to
plastic surfaces. They are small enough
to be placed in the micro plate or other
cell culture devices. The 5 mm size will
fit inside the 96-well culture plate and
leave enough room to pick it up from the
bottom of the well with forceps. The 8 mm
size fits inside the 24-well plates.
Order Number
Diameter
Thickness
Quantity
502040
5 mm
#1.5 (0.16 - 0.19 mm)
100
502041
8 mm
#1.5 (0.16 - 0.19 mm)
100
503508
25 mm
#1.5 (0.16 - 0.19 mm)
100
Slides
These clean glass microscope slides are 25 x 75 mm,
1.0~1.2 mm thick with 90° grounded edges. and are available
plain, frosted, and red ended. The frosted end slides feature
503505
503505
503506
503507
503507
a fine 20 mm frosted area on both sides of one end for easy
marking. The red frosted slides feature a 20 mm colored end
useful for identifying hazardous materials.
503506
Plain Glass Microscope Slides, Box of 144 Frosted Glass Microscope Slides, Box of 144
Red frosted Glass Microscope Slides, Box of 144
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
233
MICROSCOPES, CAMERAS
Cover Slips
Microforges, Pullers & Bevelers
Microforges
MICROFORGES, PULLERS, BEVELERS
DMF1000 Complete Microforge System................................................................................................................................. 236
MF200 Complete Microforge System.......................................................................................................................................235
Microbevelers
48000 Microbeveler.................................................................................................................................................................... 239
MBS MicroBeveler System.......................................................................................................................................................... 239
1300M Microelectrode Beveler................................................................................................................................................. 238
Impedance Meters
Omega-Tip-Z Millivolt and Megohm Meter..............................................................................................................................21
Pullers
PMP-107 Programmable Multipipette Puller........................................................................................................................ 240
Application Guide
P/N
Description
Application
Features
DMF1000
Complete Microforge System;
includes Programmable Digital
Controller and Microscope
Fabrication of special shapes of glass
micropipettes, e.g., pressure polishing of
patch clamp pipettes and making of holding
pipettes. Unique for pipette tip calibration adn
microinjection pipettes.
Most sophisticated and only microforge on
the market with built-in pressure polishing
capability. Programmable controller with
10 user-selectable memory storafe (of heat
and time) for reproducibility.
MF200
Complete Microforge System, with
analog controller
Use to fire polish glass micropipettes and
prepare special shapes
Comes with W30S Microscope, a 40x
objective and three filament sizes. Uses
exclusive Kohler illuminator instead of
industry standard frosted glass illuminator
for less glare and sharper image.
48000
Microbeveler System
Bevels micropipette tips larger than 1
micron at 4000 rpm for applications such as
microinjection.
Solid surface unit beveler with rotating disk.
Includes basic kit with abrasive alumina
lapping film.
1300M
Microelectrode Beveler
and Start-up kit
Glass micropipette beveler for submicron tips.
Not for cell injection.
Includes M3301R Manipulator and M10
magnetic stand.
MBS
Microelectrode Beveler System
Glass micropipette beveler for submicron tips.
Not for cell injection. Includes all necessary
accessories.
Omega-Z
Omega-Tip-Z with Probe and Holder
Measures impedance of metal and glass
capillary microelectrodes.
Comes with probe, probe handle and
cables.
Programmable Multipipette Puller
Produces two symmetrical 4- or 7-barrel glass
pipettes
Upgrade from model PMP-100. Equipped
with microcomputer, pneumatic pulling
arm, pneumatic rotator, optical-digital
ruler. Pulling process is programmable and
under control of a preset sequence.
PMP-107
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
234
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Sometimes the simplest designs work best.
MF200 Microforge
MICROFORGES, PULLERS, BEVELERS
The MF200 Microforge is a versatile instrument
designed specifically for the fabrication of
glass micropipettes and other related tools. The
system was developed in collaboration with Dr.
Ming Li of the Department of Pharmacology,
University of South Alabama. It is perfect for
patch pipette tip polishing, tip size reduction,
contact stretching, in vitro fertilization pipette
production and a variety of other pipette
configurations. The MF200 simple, reliable and
is priced economically.
Features of the MF200
The MF200 system includes: An easy to use
analog temperature controller, a specially
configured WPI model W30S research grade
compound microscope, 40x long-working
distance objective and 10x eyepiece. 40x
magnification is essential when polishing
pipettes as small as half a micron (0.5 µm)
in diameter. Compared to a conventional
40x objective, the long working distance
objective reduces the danger of damage to
the pipette and/or objective lens during the
polishing process. It is also the only commercial
microforge using the Kohler illuminator and
Abbe condenser for illumination. This provides
less glare and sharper image of the pipette than
frosted glass illuminator, which was used on all
of the other commercial Microforge.
MF200 SPECIFICATIONS
MF200-1 Complete Microforge System, incl. W30S Microscope (110 v) MF200-2 Complete Microforge System, incl. W30S Microscope (220 v) MF200-M1 MF 200 without microscope (110v) MF200-M2 MF 200 without microscope (220v) *Above MF200 microforges include 40X long working distance objective
OPTIONAL ACCESSORIES
500292
Optional 15× Eyepieces (pair) Note: No reticle available for 15× eyepieces
500329 25× Long-Working Distance Objective (fits most microscopes with a 160 mm Focal Length) 13142
Optional foot switch REPLACEMENT ACCESSORIES
MF200-H2 Replacement heating filament (large gauge)
MF200-H3 Replacement heating filament (medium gauge)
MF200-H4 Replacement heating filament (small gauge)
75070 Filament Adjustment Assembly for 22mm OD Objectives
75050
Replacement Micropipette Slide
75040
Replacement Filament Cable
AC POWER MODULE
100-240 VAC 50/60 Hz
FILAMENTS (3)
H2, H3, H4
FILAMENT ON
Pushbutton Controlled or Optional Foot Switch Controlled
FILAMENT ADJUSTMENT ASSEMBLY For 40× and 25× Long-Working Distance Objectives: mounts on objective
OBJECTIVE
40× Long-Working Distance (3 mm)
OPTIONAL
25× Long-Working Distance (5 mm)
EYEPIECE
10× (pair)
RETICLE (10× eyepiece only)
1.25 µm/division (at 40×)
0-90º Angle at 5º/division
15× (pair)
OPTIONAL EYEPIECE
GLASS HOLDER
Mounts on Microscope Stage
DIMENSIONS: Control Unit
4 × 7 × 17⁄8 in. (10.2 × 17.8 × 4.8 cm)
SHIPPING WEIGHT
3 lb. (1.4 kg)
MICROSCOPE See W30S
16 lb. (7.3 kg)
SHIPPING WEIGHT
Microforge Feature COMPARISON
W30S Microscope
40x Long Working Distance Objective
Analog Controller
Digital Controller Pressurized Air Control
Microinjection Capability
Optional Foot Switch
Memory
Auto-sense of Filament Type
Digital Temperature Control
MF200
✔
✔
✔
—
—
—
✔
—
—
—
DMF1000
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
235
MICROFORGES, PULLERS, BEVELERS
Microforging, Micropipette Calibration
and Microinjection — in a single device!
The DMF1000 is a ‘state-of-the-art’ microprocessorcontrolled microforge offering unmatched
performance. Designed for fabrication of both small
patch clamp glass pipettes and larger injection
pipettes, the DMF1000 should find many uses in
the laboratory. The DMF1000 is based on a design
similar to that first used in WPI’s extremely popular
microforge model, the MF200. The extensive
improvements incorporated into the DMF1000 greatly
increase its versatility and performance, making it one
of the most powerful microforges on the market.
Digital Signal Processor (DSP)
Technology
The DMF1000 is powered by the latest digital signal
processor (DSP) technology. A digital timer is used
to precisely control the polish heating time. Ten
memories can be used to store settings of the heating
power and heating duration. All of the settings are
controlled and displayed digitally for better accuracy
and reproducibility. Two different operating modes
are provided: Manual and Auto. In the Manual mode,
the DSP will memorize the duration of the time that
is used to achieve a desired polishing. In Auto mode,
the heat will be applied for the duration of the timer
setting.
Unique Features of the DMF1000
System
The DMF1000 system includes a specially configured
WPI model W30S research grade compound
microscope equipped with a high quality metallurgic
40x long-working distance objective and a pair of
10x eyepieces. It is the most powerful long-working
distance objective currently available on any
commercial microforge. The long working distance
objective reduces the danger of damage to the
objective lens during the heating process.
Other benefits of the DMF1000 design include
the use of a Kohler illuminator and Abbe condenser,
which provide the reduced glare and sharper image
contrast necessary when polishing pipettes as small as
half a micron (0.5 µm) in diameter.
Pressure Polishing
The DMF1000 incorporates a unique digital pneumatic
pressure feature that enables pressurized air to be
delivered through the pipette during fire polishing. In
the fabrication of patch pipettes, the pressurized air
can be used to blunt the taper at the pipette tip without changing the size of the tip opening. This reduces
electrical resistance of the tip, leading to lower noise
Filament Holder mounts directly to objective to provide precise control
of heating element position.
during patch-clamp recordings (Goodman & Lockery,
2000).
Ease of use
The Heating Filament
With a conventional microforge often the most
difficult and time-consuming part of using a high
magnification objective is being able to move both
the heating filament and the pipette into the same
viewing area. Finding and moving both the heating
filament and the pipette without collision can be a
challenge. However, this difficulty is eliminated with
the DMF1000 because the heating filament is directly
attached to the microscope’s objective. Hence it can
be easily adjusted to any position within the viewing
area.
The low heat capacity and low thermal
coefficient of linear expansion of the filaments
are key design features of the DMF1000. The low
heat capacity of the filament allows it to reach
fire-polishing temperatures without excessive
heat. This permits the user to bring the pipette
tip close to the filament during polishing without
fear of collapsing the pipette tip. Low heat
capacity eliminates the need for an auxiliary aircooling system. The low coefficient of expansion
characteristic of the filament ensures minimal
displacement of the filament during heating. This
feature eliminates much of the guesswork out of
tip placement in relation to the filament.
Two different heating filaments are provided with
the DMF1000 to accommodate various applications.
The H5 filament is large gauge and can be reformed
into a “U” for fabrication of pipettes, air forming of
patch pipettes and other applications. The H4 is a
smaller gauge filament and is ideal for polishing patch
clamp pipettes.
The Pipette and Microscope Stage
Fire
Polishing
Large Tip
Sharpening
(contact
stretching)
Tip Sealing
Tip Reducing
(holding
pipettes)
Tip Bending
Carbon Fiber
Sealing in
Plastic Sensor
The pipette rests on a specially designed holder that
sits on top of the microscope stage. The position
of the pipette, relative to the heating filament, is
controlled by the (X, Y, Z) adjustment of the stage.
This unique design makes locating and polishing the
pipette extremely easy. The stage of the microscope
has a high quality rail that gives precise, smooth
and stable control of the pipettes movement. This
configuration also eliminates the need and expense
of an additional micromanipulator to control pipette
movement.
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
236
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Typical applications of the DMF1000
Polishing the Patch Pipettes
Microforging Holding Pipettes
A holding pipette with a large blunt tip and a small opening is used to hold a
floating cell in place prior to microinjection by applying suction to the rear of the
pipette. The procedure for making holding pipettes involves three steps: squaring
off, large bore flame polishing, and tip reducing. These steps are accomplished with
a larger heating filament.
Microforging Beveled Injection Pipettes
Occasionally, a beveled large bore pipette is not sharp enough to penetrate a cell
without damaging the area around the pipette. With the DMF1000 and the large
heating filament, a sharp point can be formed on the beveled tip to assist the
penetration of the cell. This process is referred to as contact stretching.
ProfessionalGrade
Microscope
The W30 professional-grade
microscope is a best-seller in
universities, medical schools,
and reseach laboratories.
Equipped for performance,
its features include titaniumfinished DIN or Semi-Plan
optics and a 30-year anti-fungal
coating. The W30 is the choice
for superior performance at a
great price.
W30S
W30ST
503513
503514
Binocular Microscope
Trinocular Microscope
21 mm 10X Eyepiece with 100/10 reticle
Replacement Lamp
Pipette Tip Calibration & Microinjection
The integrated digital pneumatic pressure system can be used to calibrate the
precise diameter (I.D.) of a micropipette tip, based on a technique described
previously (Hagag & Randolph 1990, Bowman & Ruknudin 1999). The pressure
system can also be used separately as a simple but highly accurate controller for
microinjection applications.
DMF1000 SPECIFICATIONS
AC POWER MODULE
TIMER RANGE (for heater & timer)
NUMBER OF MEMORYS
PRESSURE ADJUSTING RANGE
PRESSURE RESOLUTION
FILAMENTS
HEATER AND TIMER CONTROL
DIMENSIONS: Control Unit
SHIPPING WEIGHT
MICROSCOPE
SHIPPING WEIGHT
100-240 VAC 50/60 Hz
0.01 to 360 sec
10
0.5 – 60 PSI (3.5 – 414 kPa
0.1 PSI (0.7 kPa)
H4 — Small filament for working with 40× long working distance objective.
H5 — Large filament for working with 10× objective. Filament adjustment assembly provided for both objectives.
Auto or Manual via Pushbutton, TTL, or Optional Foot switch.
4 × 7 × 17⁄8 in. (10.2 × 17.8 × 4.8 cm)
4 lb. (1.8 kg)
See W30S, page 205
16 lb. (7.3 kg)
W30S SPECIFICATIONS
DMF1000-1
Complete Microforge, incl W30S Microscope (110 v)
DMF1000-2 Complete Microforge, incl W30S Microscope (220 v)
DMF1000-M1 Microforge without microscope (110v) DMF1000-M2 Microforge without microscope (220v) *Above DMF1000 microforges include 40X long working distance objective
OPTIONAL ACCESSORIES
500329
25x Long Working Distance Objective, 5 mm 0.50NA
500292
Optional 15x Eyepiece (pair)
13142
Optional foot switch
REPLACEMENT ACCESSORIES
800292
40x Long Working Distance Objective, 3 mm 0.25NA
503513
21 mm 10X Eyepiece with 100/10 reticle
DMF1000-H5 Replacement heating filament (large gauge)
MF200-H4
Replacement heating filament (small gauge)
75050
Replacement Micropipette Slide
75040
Replacement Filament Cable
HEAD
Binocular (Seidentopf)
Inclined 30°, rotates 360°
Dual diopter adjustment, Interpupillary distance range 55-75mm
10X/18 wide field eyepieces
NOSEPIECE
Quadruple forward-facing nosepiece
OBJECTIVES
DIN Plan, anti-fungal
4X, 10X, 40X, 100XR (oil)
Parfocal, parcentric, color-coded
STAGE
Mechanical stage (140mm x 140mm)
Coaxial drive controls
XY Movement: 73mm x 43mm
FOCUS
Coarse adjustment: range of 30mm
Fine adjustment: graduation of 2μm
Tension control knob
ILLUMINATION
Moveable Abbe condenser, NA 1.25,
Iris diaphragm
Variable halogen light source (12V/20W bulb)
110V/220V switchable electronics
DIMENSIONS AND WEIGHT 15” (38cm) x 9” (23cm) x 7” (17.8cm) (h x l x w)
14 lbs. (6.4kg)
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
237
MICROFORGES, PULLERS, BEVELERS
It is well known that the proper fire polishing of patch pipettes is the single most
important factor for forming a stable giga-seal in patch clamp recording. This is
even more important than the type of glass capillary used. Difficulties often arise
in forming giga-seals because the polishing of patch pipettes using a conventional
low magnification microforge is inadequate. However, since the DMF1000 uses a
40X long-working distance objective, pipette polishing is much more accurately
controlled. Pipettes polished using the DMF1000 achieve excellent stable giga-seals
with a wide variety of cells. Both whole cell patch pipettes and single channel patch
pipettes can be conveniently polished with the DMF1000 to the highest quality and
reproducibility achievable with any microforge.
For the single-channel patch clamp pipettes the pipette needs to be pre-coated
with Sylgard 184 before polishing. For this procedure the user can follow a simple
and effective coating method described previously (Li, 1999)
MICROFORGES, PULLERS, BEVELERS
Glass
Micropipette
Beveler for
submicron
tips
Easier cell impalement results in
less damage and longer cell life
An optically-flat mirrored glass disk, wetted with an abrasive slurry, spins
at 60 rpm (120 V), producing sharply beveled tips on fluid-filled glass
microelectrodes of one micron or smaller. This eases cell impalement
and improves the electrode's linearity. The microelectrode’s resistance
can be monitored during beveling with WPI’s Ωmega-Tip-Z™ megohm
meter (see page 31). The beveler is permanently mounted on a precision
magnetic plate that gives stable support for the optional 1350M
Micropositioner shown. Start-up kit includes 0.05 µm alumina abrasive
powder #3531, wick electrode, and wick support.
SYS-1300M
Microelectrode Beveler & Start-Up Kit
(micropositioner not included)
Specify line voltage.
OPTIONAL ACCESSORIES
2478
Replacement Mirrored Disk
3531
Alumina Abrasive, 0.05 µm (5 g) fine
3551
Alumina Abrasive, 0.30 µm (5 g)
2479
Replacement “O” Ring SYS-OMEGAZ Ωmega-Tip-Z with Probe & Holder
711P
Replacement Probe
5468
Adapter to connect metal microelectrodes to
probe, 2 mm socket to .031 in. receptacle NOVA
Novaflex Fiber Optic Illuminator (115v, 60HZ)
NOVA-Z
Novaflex Fiber Optic Illuminator (230v, 80HZ)
500186
Bifurcated Light Guide with lenses
NOVA-186 Novaflex Illuminator and bifurcated light guide
MES
Microelectrode Beveler System
Model 1350M Micropositioner — This package (shown with beveler
above) includes WPI’s M3301R Manipulator and an M10 magnetic
stand. The stand-manipulator assembly mounts di­rect­ly onto the beveler
baseplate, allowing convenient positioning of elec­trodes onto the
beveling surface. Three axes of adjustment, including coarse and fine
control in the axis of the electrode.
1300M SPECIFICATIONS
BEVELING SURFACE
7.8 cm diameter, optically flat reflective glass
MAXIMUM BEVEL
ALUMINA ABRASIVE POWDER
RPM
MOTOR
POWER REQUIREMENTS
DIMENSIONS
Steel base plate
Overall height
Height of abrasive surface SHIPPING WEIGHT
0.5 µ , I.D.
0.05 µ size supplied (0.3 µ also available)
60 rpm at 120 V, 60 Hz; 50 rpm at 240 V, 50 Hz
AC synchronous
95-135 V or 220-240 V, 50/60 Hz
8.5 x 11 x 0.375 in. (22 x 28 x 1 cm)
4 in. (10 cm)
2.75 in. (7 cm) above base plate
20 lb (9.1 kg)
MES includes: 1300M Microelectrode Beveler; 1350M Micropositioner &
Magnetic Stand; OmegaZ; 5052 Steel Base Plate; 5468 Adapter; 3485
Ringstand Mount. Shipping Weight: 59 lb. (27 kg)
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
238
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
The only microbeveler system
with Guided Light!
Bevel micropipette tips larger than 1 micron,
for ap­pli­ca­tions such as microinjection
l Tool holder on microscope keeps
pipette in focus during beveling
l Includes stereo zoom microscope
PZMIII with up to 90x magnification
l Steel base provides solid support for
beveler and other magnetic stands
l Variable speed, reversible
The advantage of WPI’s MicroBeveler over other types of solid-surface
bevelers is that the abrasive surface can be easily refreshed. Instead
of using a conventional solid abrasive disk, the MicroBeveler abrasive
surface is made of a high quality lapping film, widely used in the fiber
optics industry. When the surface is damaged or loaded up with glass
particles, the abrasive film can be easily replaced.
The solid polishing surface of WPI’s new MicroBeveler, turning at 6,000
rpm, provides sufficient cutting force for a very sharp tip in a very short
time. The cutting surface is very flat and turns very smoothly, ensuring
an undamaged tip.
48000 SPECIFICATIONS
Beveling Surface
3.5 inch diameter disk
Abrasive Material
alumina, diamond
Speed of Rotation
100 to 6000 rpm
Motor
Reversible Direction
Power Requirements
120 volts, 60 Hz or
240 volts, 50 Hz, 20 VA to sup­plied power supply
Dimensions
Base Plate
8.7 × 11 × 0.4 in. (22 × 28 × 1 cm)
Overall Height
3 in. (8 cm)
SHIPPING WEIGHT (48000)
16 lbs. (7.6 kg.)
SHIPPING WEIGHT (MBS) 35 lbs. (16 Kg.)
l Abrasive surface can be easily
replaced by several types of Diamond
and Alumina Lapping Film
l Pipette tip illuminated internally via
fiber optic illuminators
MBS
MicroBeveler System
Includes all components pictured above: 48000 MicroBeveler,
NOVA illuminator, fiber optic cable, PZMIII Stereo Zoom
Microscope with tilting base especially adapted for use with
MicroBeveler, two clear 20x eyepieces, one 20x eyepiece with
reticle, tool holder, and pipette holder FOIMPH.
SYS-48000MicroBeveler
Specify line voltage
optional accessories
48015-03 Lapping Film, Alumina, 0.3 micron (50-pack)
48015-10 Lapping Film, Alumina, 1 micron (50-pack)
48015-30 Lapping Film, Alumina, 3 microns (50-pack)
48014-01 Lapping Film, Diamond, 0.1 micron (3-pack)
48014-05 Lapping Film, Diamond, 0.5 micron (3-pack)
48014-10 Lapping Film, Diamond, 1 micron (3-pack)
48014-30 Lapping Film, Diamond, 3 microns (3-pack)
48025
Fiber Optic Cable for Pipette Illumination
Replacement Beveler Disk Plate
15934
Tilt Base Assembly for PZMIII binocular head
48300
PZM Tool Holder
48200
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
239
MICROFORGES, PULLERS, BEVELERS
System now
includes PZMIII
stereo microscope
MICROFORGES, PULLERS, BEVELERS
Programmable
Multipipette
Puller
PMP-107
●Double top panel structure.
●Automatic 4-Barrel or 7-Barrel
Pipette Puller.
●Exclusive Optical-Digital Ruler
Measurement.
●Computerized Real-Time Feedback
Heater Control.
●Pneumatic Pulling Force and
Compact Size.
●Programmable and Savable
Sequences for Creation and
Reproduction.
●Manufacture Preset Pulling
Programs for 4 and 7-Barrel
The PMP-107 Programmable Multipipette
puller can pull a one to 7-barrel pipette
with easy push-button processing. Equipped
with a microcomputer, pneumatic pulling
arm, pneumatic rotator, optical-digital ruler
and specially designed clamp, the PMP107 can automatically heat, twist and pull a
multibarrel pipette. There is no need for any
manual rotation or any inconsistent timing
interrupt control. The whole pulling process is
programmable and under control of a preset
sequence. The PMP-107 is a new upgrade
model from the PMP-100 multipipette puller.
The rotation (twist) speed is adjustable.
PMP-107 SPECIFICATIONS
PIPETTES
Single- to 7-Barrel
EACH BARREL O.D.
1 mm (2 mm for single-barrel)
PULLING FORCE
Pneumatic
HEATER
Nichrome coil or foil
HEATER CONTROL
Microcontroller
HEATING
74 general heat levels (24-99), 64 automatic heat levels (45-98)
NUMBER OF SEQUENCES
25
STEPS PER SEQUENCE
18
TAPER LENGTH SETTING
0.5 - 20 mm
PRESSURE 1
Adjustable 0.1 - 10 psi
PRESSURE 2
Adjustable 0.1 - 60 psi
COOLING PRESSURE
Adjustable for rotation speed
GAS INPUT PRESSURE
30-60 psi
ACTIONS
Pull 1, Pull 2, Pull2/Cool, Rotation, Cool Air, Return
DISPLAY
20x4 LCD
POWER INPUT
110 / 240 VAC
POWER CONSUMPTION
Maximum 150 watts
DIMENSIONS
14 x 11 x 7 in. (35.6 x 27.9 x 17.8 cm)
WEIGHT
15 lb (6.8 kg)
PMP-107 Programmable Multipipette Puller (110 V)
PMP-107-Z Programmable Multipipette Puller (240 V)
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
240
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Sharp Electrode Glass
Capillaries
WPI offers a wide spectrum of high-quality glass
capillaries. We take pride in our abil­i­ty to ship
your glass order within 48 hours. If you need a
special glass that does not ap­pear in our catalog,
please call us. We will make every effort to
provide it for you.
Fire-Polished glass
capillaries are easier to insert into
microelectrode holders without
damaging the gasket. More
importantly, fire-polished glass
won’t scratch the chloridized wire
used in a recording electrode.
Fire-polishing does not affect the
glass’s mechanical or electrical
properties.
Borosilicate glass capillaries: Close
di­men­sion­al tol­er­anc­es assure mi­cro­elec­trode
uni­for­mi­ty and reproducibility. Available in one-,
two-, three-, five- and seven-barrel con­fig­u­ra­tions;
a complete range of single bar­rel thin-wall siz­es;
and a variety of special con­fig­u­ra­tions. Cap­il­lar­ies
with filaments con­tain a solid fil­a­ment fused to
the inner wall, which speeds filling of electrodes.
Cap­il­lar­ies with or with­out inner filaments are
available for making microelectrodes in a wide
range of diameters .
Thin Wall single barrel capillaries are of­fered
both with or without inner filaments. The con­cen­
tric­i­ty of this material provides ex­cel­lent strength.
Micropipettes made from thin wall capillaries have
fine tips with a short taper.
Note: Because electrode tips erode
when left filled with saline solutions
for long peri­ods, electrodes should
be made and filled im­me­di­ate­ly
prior to use.
Standard,
with Filament
Thin Wall,
no Fil­a­ment
Thin Wall,
with Filament
Single-Barrel Standard Borosilicate Glass Tubing
Length
OD
(mm)
ID
(mm)
3 in. (76 mm)
3 in. (76 mm)
3 in. (76 mm)
3 in. (76 mm)
3 in. (76 mm)
3 in. (76 mm)
4 in. (100 mm)
4 in. (100 mm)
4 in. (100 mm)
4 in. (100 mm)
4 in. (100 mm)
4 in. (100 mm)
4 in. (100 mm)
4 in. (100 mm)
6 in. (152 mm)
6 in. (152 mm)
6 in. (152 mm)
6 in. (152 mm)
6 in. (152 mm)
6 in. (152 mm)
6 in. (152 mm)
6 in. (152 mm)
1.0
1.0
1.2
1.2
1.5
1.5
1.0
1.0
1.2
1.2
1.5
1.5
2.0
2.0
1.0
1.0
1.2
1.2
1.5
1.5
2.0
2.0
0.58
0.58
0.68
0.68
0.84
0.84
0.58
0.58
0.68
0.68
0.84
0.84
1.12
1.12
0.58
0.58
0.68
0.68
0.84
0.84
1.12
1.12
Filament
FirePolished
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
Quantity
Item
Price
500
500
350
350
225
300
500
500
400
350
300
300
125
200
500
500
350
350
225
225
125
125
1B100F-3
1B100-3
1B120F-3
1B120-3
1B150F-3
1B150-3
1B100F-4
1B100-4
1B120F-4
1B120-4
1B150F-4
1B150-4
1B200F-4
1B200-4
1B100F-6
1B100-6
1B120F-6
1B120-6
1B150F-6
1B150-6
1B200F-6
1B200-6
52
52
US$
52
US$
52
US$
52
US$
52
US$
56
US$
56
US$
56
US$
56
US$
56
US$
56
US$
56
US$
56
US$
68
US$
68
US$
68
US$
68
US$
68
US$
68
US$
68
US$
68
US$
US$
Thin-Wall Single-Barrel Standard Borosilicate
(Schott Duran) Glass Tubing
Single Barrel standard wall thickness cap­
il­lar­ies are offered either with or without in­ner
fil­a­ments for quick filling in a variety of lengths
and diameters. Two usable elec­trodes can be
made from one 6-inch length. ­Borosilicate glass is
either Corning 7740 or N51A, depending on the
part number. Contact WPI Technical Support for
specifications for your part number.
Standard,
no Filament
OD
(mm)
ID
(mm)
1.0
1.0
1.2
1.2
1.5
1.5
1.0
1.0
1.2
1.2
1.5
1.5
1.0
1.0
1.2
1.2
1.5
1.5
0.75
0.75
0.90
0.90
1.12
1.12
0.75
0.75
0.90
0.90
1.12
1.12
0.75
0.75
0.90
0.90
1.12
1.12
FIL
FirePolished
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
Length
Quantity
Item
Price
3 in. (76 mm)
3 in. (76 mm)
3 in. (76 mm)
3 in. (76 mm)
3 in. (76 mm)
3 in. (76 mm)
4 in. (100 mm)
4 in. (100 mm)
4 in. (100 mm)
4 in. (100 mm)
4 in. (100 mm)
4 in. (100 mm)
6 in. (152 mm)
6 in. (152 mm)
6 in. (152 mm)
6 in. (152 mm)
6 in. (152 mm)
6 in. (152 mm)
500
500
350
350
225
300
500
500
350
350
300
300
500
500
350
350
225
300
TW100F-3
TW100-3
TW120F-3
TW120-3
TW150F-3
TW150-3
TW100F-4
TW100-4
TW120F-4
TW120-4
TW150F-4
TW150-4
TW100F-6
TW100-6
TW120F-6
TW120-6
TW150F-6
TW150-6
52
52
US$
52
US$
52
US$
52
US$
52
US$
56
US$
56
US$
56
US$
56
US$
56
US$
56
US$
68
US$
68
US$
68
US$
68
US$
68
US$
68
US$
US$
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
241
MICROFORGES, PULLERS, BEVELERS
Clean, high quality glass for making
micropipette elec­trodes and other research
implements
Pumps & Fluid Handling
Peristaltic Pumps
Peri-StarTM Pro Peristaltic Pump. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244
MityFlex Peristaltic Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 246
Mini-Star™ Miniature DC Peristaltic Pump. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 246
Laboratory Syringe Pumps
Aladdin Syringe Pumps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 247
SP Series Syringe Pumps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 248
PUMPS, MICROINJECTION
VSP1 Syringe Pump. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 262
Eagle Pipetters
Eagle Pipetters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 254
Universal Pipette Tips. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 255
Remote Micro Syringe Pump / Stereotaxic Injection
UltraMicroPump III Microsyringe Pump. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 252
DMP & MMP Manual Microsyringe Pumps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 259
Oocyte Injection
Nanoliter 2000 Microprocessor Controlled Injector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 258
Single and Multi-channel Micro Pressure Injection
PV820 Pneumatic PicoPump. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 256
PV830 Pneumatic PicoPump. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 256
Supplies & Tools
Syringes for SP Series and Aladdin Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250
Syringes, Microvolume, for UltraMicroPump III. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 253
Pressure Manometers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 259
NanoFil™ Specialty Microsyringe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260
NanoFil™ Application Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 262
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
242
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Which pump is right for you?
encourage you to phone or email us and speak
to a tech support specialist. In the meantime,
we have tried to simplify the process by listing
all of the pumps and injectors in a chart that
sorts them by technology, flow range and
special features. Special features tell you about
Pump Type
Fluid Range
Number of
Channels
Peripro-2HS
Peristaltic
0.8 - 300 mL/min
2
Peripro-4HS
Peristaltic
0.8 - 300 mL/min
4
Calibrated output Replaceable tubing cartridges
Peripro-4LS
Peristaltic
0.01-80 mL/min
4
Calibrated output Replaceable tubing cartridges
Peripro-8LS
Peristaltic
0.01-80 mL/min
8
Calibrated output Replaceable tubing cartridges
MityFlex
Peristaltic
1.7-800 mL/min
1
High Volume
MINISTAR
applications of the pump or technical aspects
that are more properly discussed in a technical
manual than a catalog entry. We frequently
use the terms Infuse/Withdraw (I/W), Push/Pull
and RS232, and these terms are defined below.
Many of the syringe pumps can be had with
an alarm option that alerts the user to end of
travel or blocked flow and a “P” option that
allows programmable flow and volume profiles
without using the RS232 computer interface.
Infuse/Withdraw: Describes a feature of
a syringe pump whereby the syringe plunger
is held by the pusher so the motor can pull
the plunger back, withdrawing fluid as well as
pushing the plunger to infuse it.
Push/ Pull: Again, a feature of syringe
pumps which use two syringes mounted back
to back so movement of the pusher block will
simultaneously withdraw fluid into one syringe
and infuse an equal amount from the other.
RS232: This is a serial interface. Some pumps
in the WPI line can be addressed by computer.
Simple programs can be created to control the
pump rate, the overall volume. Flow ramps or
other profiles and temporal sequences can be
written. In addition, pumps can be daisy-chained
together to create a pump network. In such a
network, each pump has its own address and
can be addressed separately by the program.
Special features
Calibrated output Replaceable tubing cartridges
Peristaltic
0.006- 37 mL/min
1
Compact design, Remote control
AL-1000
Syringe
0.000073-1699 mL/hr
1
Push/pull
AL-2000
Syringe
0.000073-1699 mL/hr
2
Push/pull (2 networked pumps)
SP100i
Syringe
0.0001-519 mL/hr
1
Basic 1 Channel
SP101i
Syringe
0.001 µL/hr – 35mL/min
2
Micro Dialysis application
SP200i
Syringe
0.001µL/hr - 145 mL/min
2
RS232 TTL/Footswitch
SP220i
Syringe
0.001µL/hr - 21 mL/min
10
RS232 Infuse Only
SP250i
Syringe
0.001µL/hr - 21 mL/min
4
RS232 Infuse Only
SP210iw
Syringe
0.001µL/hr - 145 mL/min
2
RS232 Infuse/Withdraw
SP230iw
Syringe
0.001µL/hr - 21 mL/min
10
RS232 Infuse/Withdraw
SP120p
Syringe
0.1 µL/hr – 127 mL/hr
1+1
push pull, single cycle
SP260p
Syringe
0.001µL/hr - 86 mL/min
2+2
RS232 push pull, single cycle
SP210c
Syringe
0.001µL/hr - 86 mL/min
2+2
VSP1
Syringe
0.1 mL/hr - 600 mL/hr
1
RS232 push pull, continuous
1299
$
Safety features include two-hour battery operation
UMP2
Syringe
0.03nL/min - 10 µL/sec
1
Ultra Micro Infuse/Withdraw RS232
B203XV
Syringe
Bolus, 2.3-69 mL/Injection
1
Oocyte Injector, Infuse only
MMP
Syringe
Manual 100 µL-1mL syringe
1
Manual
DMP
Syringe
Manual 100 µL-1mL syringe
1
Digital readout Micrometer
PV820
Pneumatic
Bolus/Continuous Pressure,
Duration and Pipette dependent
1
Injection Pressure and Holding Pressure
PV830
Pneumatic
Bolus/Continuous Pressure,
Duration and Pipette dependent
1
Injection Pressure and Holding Pressure and Vacuum
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
243
PUMPS, MICROINJECTION
WPI carries a wide variety of fluid handling tools
utilizing three different technologies: peristaltic
pumps, syringe pumps and pneumatic
injectors. The range of applications and the
criteria by which one selects a particular pump
or injector is broad and complex and we
Peri-Star Pro
™
High performance digital peristaltic pump at an
affordable price!
l Display either rotation speed
(RPM) or flow rate (mL/min)
PUMPS, MICROINJECTION
l Wide flow range: 0.01 280 mL/min
l Accuracy of flow rate: 0.5%
using self calibration function
l Accuracy of speed: 0.1 rpm
l Large backlit digital LCD
display
l Programmable for all tubing
sizes between 0.8 mm and
6.4 mm ID
l Easy and fast tubing
replacement using snap-on
cartridges
l Membrane keypad allows easy
programming while protecting
controls from fluid entry
l Actively driven rollers by
planetary gears for long
lasting tubing life.
Peri-Star™ Pro peristaltic pumps provide
accurate and precise pumping with convenience
and versatility. Peri-Star Pro can be run in either
flow rate mode (mL/min) or rotation speed
mode (rpm). For good laboratory practice,
pumps must be calibrated after changing the
tubing and solution. Users can easily calibrate
Peri-Star Pro to deliver flow as accurate as
0.5% in a wide flow range from 0.01 mL/min
to 280 mL/min. Under rotation speed mode,
the digitally controlled stepping motor provides
accurate and reproducible operation with 0.1%
rpm both forward and in reverse.
Large backlit digital LCD display provides
readouts of rotation direction, flow rate or
rotation speed, tubing ID, drive status and
remote control mode simultaneously. Water
resistant membrane keypad allows easy
programming while protecting LCD display and
controls from fluid entry.
Built-in Human Machine Interface (HMI) with
screen instructions in plain English steps users
through initial setup, calibration and operating
procedures. The user-friendly interface reduces
the need to frequently check the printed
manual for instruction and reference.
Peri-Star Pro is available in two versions: a
4-roller version for high flow and an 8-roller
version for lower volumes while providing high
pressure with minimal pulsations.
A unique planetary gear design with eight
actively driven rollers (four rollers for higher
flow rate model), together with independent
tubing compression fine adjustment, greatly
increases flow accuracy and prolongs tubing
life. Snap-on cartridges allow tubing to be
changed quickly without cross contamination of
solutions.
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
244
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Available in 2-, 4‑ and 8-channel versions
Pump head for
PERIPRO-4LS
(4 channels, 8 rollers)
Pump head for
PERIPRO-4HS
(4 channels, 4 rollers)
Pump head for
PERIPRO-8LS
(8 channels, 8 rollers)
Peri-Star PRO Specifications
Peri-Star Pro 2H / 4H
(High Rate)
Number of rollers
Number of channels
Rotor Speed Range
Fluid Flow range
Tubing range
SELF-CALIBRATION
Working Environment
Power
Dimensions
Shipping weight
Peri-Star Pro 4L / 8L
(Low Rate)
4
8
2–4
4–8
1–100 rpm
1–100 rpm
0.8–280 mL/min
#17 Tubing: 3.5–280 mL/min
0.01–80 mL/min
#14 Tubing: 0.2–18 mL/min
3.1–6.4 mm ID
0.5–2.4 mm ID
Yes
Yes
0–45°C, Humidity < 80%
0–45°C, Humidity < 80%
110 V or 220 V AC, 50 - 60 Hz
110 V or 220 V AC, 50 - 60 Hz
190 x 162 x 275 mm
190 x 162 x 275 mm
11 lb / 5 kg
11 lb / 5 kg
PUMPS, MICROINJECTION
Pump head for
PERIPRO-2HS
(2 channels, 4 rollers)
NEW PERI-STAR PRO PUMPS
PERIPRO-2HS Peri-Star™ Pro, 2-channel, High Rate, Large Tubing (110-220V)
PERIPRO-4HS Peri-Star™ Pro, 4-channel, High Rate, Large Tubing (110-220V)
PERIPRO-4LS Peri-Star™ Pro, 4-channel, Low Rate, Small Tubing (110-220V)
PERIPRO-8LS Peri-Star™ Pro, 8-channel, Low Rate, Small Tubing (110-220V)
OPTIONAL ACCESSORIES
503049
Replacement Tubing Cartridge, Large
503050
Replacement Tubing Cartridge, Small
503022
Replacement Silicone Tubing, 1m, 1.6 mm I.D., #14, with stops
503023
Replacement Silicone Tubing, 1m, 6.4 mm I.D., #17
503120
TTL Control Module
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
245
MityFlex
Peristaltic Pump
The MityFlex is an economical, variable speed, peristaltic pump that can
handle a wide variety of viscosities from air to gases to heavy slurries,
with consistent displacement.
This pump can be used for fluid transfer or for metering applications. By
varying the tubing a wide range of flow rates can be achieved. This is a
great value for medium to high flow applications.
MITYFLEX Specifications
NUMBER OF Rollers
2
Flow rate
1.7 to 800 mL/min. Variable speed-reversible
RPM range
8-228
Flow rates
Tubing I.D.
Flow Rate
1
/16 in.
1
/8 in.
3
/16 in.
1
/4 in.
1.7-48 mL/min*
7-190 mL/min
16-456 mL/min
28-800 mL/min
PUMPS, MICROINJECTION
#14
#16
#25
#17
POWER
115 VAC / 60 Hz or 220 VAC / 50 Hz
Dimensions
22.6 x 14.2 x 19 cm (8.9 x 5.6 x 7.5 in.)
Shipping Weight
3.6 kg (8 lb)
* To use
Included with the MityFlex are four short lengths of Norprene™ tubing to fit into the
roller mechanism — 1/16", 1/8", 3/16", 1/4" — and black rollers for use with 3/16" to 1/4" tubing. The optional MITY-KIT includes replacement tubing and a set of red rollers for
use with 1/16" and 1/8" tubing. Norprene is a trademark of Saint-Gobain Performance Plastics Corp.
Masterflex Equiv.
/8 -in. or 1/16 -in. tubing, MITY-KIT is required.
1
500282
MityFlex Peristaltic Pump (110 V) 500283
MityFlex Peristaltic Pump (220 V)
MITY-KIT Replacement Parts Kit with Rollers
MITY-KIT includes 4 short lengths of Norprene™ tubing to fit into the roller
mechanism — 1/16", 1/8", 3/16", 1/4" — and red rollers for use with 1/16" tubing.
Mini★Star™
Miniature DC Peristaltic Pump
This compact and lightweight peristaltic pump fits just about
anywhere. It can be mounted directly on the bench, in a regular
rack or to a post. The MiniStar’s speed can be adjusted from 1rpm
to 50 rpm. With recommended silicone tubing, the volume can be
set from 0.06 mL/min to 14.0 mL/min. The MiniStar also features
a hand held remote control that allows users to start and stop the
pump, purge or adjust its speed and direction.
MINISTAR SPECIFICATIONS
Channel
1
Speed
1-50.0 rpm, forward/reverse
Flow range
0.06~14.0 mL/min
Resolution
1 rpm (0.1 rpm computer control)
Speed control
Remote control
Display
Indicators for status and speed
Power
12 V DC (110/220 VAC adapter incl.)
Working condition
Temperature 0-40°C, humidity < 80%
Tubing
Wall Thickness
Outer Diameter
Two-stop Silicone
0.8~1.0 mm
≤ 4.8mm
Dimension of driver 135×72×72 mm (L×W×H)
Dimension of remote control 105×50×16 mm (L×W×H)
Weight of driver
MINISTAR
503120
503121
503122
0.5 Kg
Miniature Peristaltic Pump, 1-channel
TTL Control Module
Silicone Tubing w stops, 2.4mm ID x 0.8mm wall x 1 m (5-pk)
Silicone Tubing w stops, 1mm ID x 1mm wall x 1 m (5-pk)
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
246
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Aladdin
Programmable Syringe Pump
● Versatile
● More Features
● Dual Pumping Action
ALADDIN SPECIFICATIONS
SYRINGE SIZES
1-60 mL, or 0.5-5 µL micro syringes
NUMBER OF SYRINGES
1
MOTOR TYPE
Step Motor, 1/8 to 1/2 step modes
STEPS PER REVOLUTIONS
400
STEPPING (max. min.)
0.21 µm to 0.850 µm
MOTOR TO DRIVE SCREW RATIO
15/28
SPEED (max./min.)
5.1 cm/min / 0.0042 cm/hr
PUMPING RATES
1699 mL/hr with 60 mL syringe, to
0.73 µL/hr with 1 mL syringe
MAXIMUM FORCE
35 lb at min. speed, 18 lb at max. speed
NUMBER OF PROGRAM PHASES
41
RS-232 PUMP NETWORK
100 pumps maximum
POWER supply
Wall adapter 12V DC @ 850 mA
DIMENSIONS
22.9 x 14.6 x 11.4 cm
(8.75 x 5.75 x 4.5 in.)
WEIGHT
1.6 kg (3.6 lb)
Need a pump for two syringes? Two Aladdin pumps when daisy-chained are
more efficient and affordable than any competitor’s dual syringe models.
Two Aladdins (Al-2000) will perform as a dual infusion/withdrawal pump,
a double pump for infusing at different rates, a push/pull pump with one
infusing and one withdrawing at the same or different rates, two independent
pumps, or a master/slave pump. One Aladdin can even control the second for
continuous pumping with optional check valve set.
The Aladdin pump series will accept syringes from Becton Dickinson,
Monoject, Terumo, and Air-Tite.
AL-1000
Programmable Syringe Pump AL-2000
Two AL1000 Syringe Pumps Includes GN-TTL Interconnecting Cable for push/pull or continuous
pumping. Valves not included.
Specify line voltage
When ordering 220V models, specify UK, Euro or Australian line cord.
OPTIONAL ACCESSORIES
GN-PC7
PC to pump cable, 7 ft
GN-PC25
PC to pump cable, 25 ft
GN-NET7
Pump-to-pump network cable, 7 ft
GN-NET25 Pump-to-pump network cable, 25 ft GN-TTL
Pump-to-pump reciprocating cable
ADPT2
Footswitch
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
247
PUMPS, MICROINJECTION
● Economical
Syringe Pumps
Microprocessor-controlled syringe pumps for applications requiring high me­ter­ing
precision at low, pulse-free rates
Sturdy and reliable, ex­treme­ly sim­ple to set up and use — and sur­pris­ing­ly af­ford­able. Liquid crys­tal
displays (LCDs) prompt you through set­up:
1. Select syringe from table stored in the pump’s memory and dis­played on the LCD.
2. Enter the volume to be dispensed.
3. Enter the flow rate, press “start.”
PUMPS, MICROINJECTION
It’s fast and simple. Your settings are permanently stored in memory — there’s no need to reenter them each day. SP pumps feature preset rate and volume control. Just set the volume you
want dispensed. Volume is tracked continuously on the LCD display. Then, when the preset volume
has been dispensed, the pump shuts off automatically. The easy-to-read digital dis­play provides
real-time read­ings using both parameters and val­ues for clearer, mistake-free readings. The SP200
Series pumps offer TTL and RS-232C interfaces and automatic shutoff under stall conditions.
Single-Syringe Infusion Pump
SP100i
SP100i SPECIFICATIONS
Mode
Infusion
Syringe Size
10 µL to 60 mL (one)
Maximum Flow Rate
519 mL/hr
(60 mL Syringe)
Minimum Flow Rate
0.1µL/hr
(10 µL Syringe)
Linear Force
20 Ib (9 kg)
Advance Per Microstep
0.529 micron (1/2-step)
Maximum Step Rate
400 steps/sec
(1/2-step)
Minimum Step Rate
1 step/30 sec
Accuracy
< 1% error
Reproducibility
± 0.1%
Dimensions
9 x 6 x 5.5 in.
● Holds any size syringe, 10 µL to 50 mL
23 x 15 x 14 cm
● Automatic volume control and shutoff
Shipping Weight
7.5 Ib (3.4 kg)
This inexpensive single-syringe infusion pump
combines precision and simplicity with outstanding
ease of use and durability.
● Simple menu-driven setup: dispense
volume, dispense flow rate, syringe
diameter (selected from displayed table)
Available 95-135 V or 220-240 V, 50/60 Hz
● Last settings stored in permanent memory
● Continuous dispense volume display
Two-Syringe Microdialysis Pump
SP101i
SPECIFICATIONS
SP101i
Mode
Infusion
(Microdialysis)
Syringe Size
10 µL to 10 mL (two)
Maximum Flow Rate
0.351 mL/min.
(10 mL Syringe)
Minimum Flow Rate
0.001µL/min
(10 µL Syringe)
Linear Force
40 Ib (18 kg)
Advance Per Microstep
0.088 micron (1/2-step)
Maximum Step Rate
400 steps/sec
(1/2-step)
Minimum Step Rate
1 step/30 sec
Accuracy
< 1% error
Reproducibility
± 0.1%
Dimensions
9 x 6 x 5.5 in.
23 x 15 x 14 cm
Shipping Weight
7.5 Ib (3.4 kg)
Available 95-135 V or 220-240 V, 50/60 Hz
Developed especially for use
in microdialysis experiments,
these pumps produce very
fine syringe movement. The
modified SP100i gearing
features a sixfold gear
reduction compared to
standard models, allowing
pumping at much
smaller flow rates.
(See sensors such as
ISO-NO and Micro-C
for detection of
dialysates.) The
SP101i is a dual
barrel infusion only
pump.
● Holds two syringes, 10 µL to 1­0 mL
SP100i
SP100iZ
SP101i
SP101iZ
####-A
Syringe Pump, Infusion (single), 95-135 V
Syringe Pump, Infusion (single), 220-240 V
Syringe Pump, Microdialysis (double, slow speed), 95-135 V
Syringe Pump, Microdialysis (double, slow speed), 220-240 V
All 240-volt pumps are CE-approved.
Audible Alarm (add “A” to end of pump part number when ordering)
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
248
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Two-Syringe Infusion Pump
SP200i
This feature-laden two-syringe infusion pump
combines a broad speed range and holds a wide
range of syringe sizes to meet the requirements
of virtually any laboratory application.
SP200i SPECIFICATIONS
● Holds two syringes, 10 to 140 mL
SP200i
● Backlit LCD display
Mode
Infusion
Syringe Size
10 µL to 140 mL (two)
● Knob locks/unlocks drive block for
effortless, drag-free adjustment
Maximum Flow Rate
(140 mL syringe)
145 mL/min
Minimum Flow Rate
0.001µL/hr
● Simple menu-driven setup: Syringe
diameter (selected from displayed table),
Dispense volume, Dispense flow rate
Linear Force
40 Ib (18 kg)
● Continuous dispense volume display
Advance Per Microstep
0.165 micron
● Preset volume control and automatic shutoff
Maximum Step Rate
1600 steps/sec
● Settings can be reviewed or changed during operation
Minimum Step Rate
1 step/100 sec
Accuracy
< 1% error
● Optical encoder stall detection
Reproducibility
± 0.1%
Dimensions
28 x 23 x 14 cm
11 x 9 x 5.5 in.
Shipping Weight
12 Ib (5.4 kg)
● Choice of unit selection
● Last settings stored in permanent memory
● Built-in RS-232C interface for computer linking or
“daisy chaining” up to 100 pumps.
● TTL interface for foot switch, timer, relay control;
outputs for run indicator, valve control.
Available 95-135 V or 220-240 V, 50/60 Hz
Ideal for applications requiring multiple syringes, the
SP220i is an adaptation of the SP200i and has been
modified to hold up to 10 syringes.
● SP220i has all features of SP200i
● The multiple syringe holder accommodates 10
syringes up to 10 mL, or six syringes up to 50 mL,
or four syringes up to 140 mL.
SP220i
Mode
Infusion
Syringe Size
10 µL to 10 mL (ten)
10 µL to 60 mL (six)
10 µL to 140 mL (four)*
Maximum Flow Rate
21 mL/min (10 mL syringe)
Minimum Flow Rate
0.001µL/hr (10 µL Syringe )
Linear Force
40 lb (18 kg)
Advance Per Microstep
0.165 micron
Maximum Step Rate
1600 steps/sec (1/2-step)
Minimum Step Rate
1 step/100 sec
Accuracy
< 1% error
Reproducibility
± 0.1%
Dimensions
11 x 12 x 5.5 in.
28 x 30 x 14 cm
Shipping Weight
12.5 Ib (5.7 kg)
Available 95-135 V or 220-240 V, 50/60 Hz
Four-Syringe Nanoliter Infusion Pump
SP250i
Each syringe can be sized differently and is
clamped independently
SP250i SPECIFICATIONS
● Holds four syringes, up to 10 mL each.
● Separate clamping accommodates different
sizes.
SP250i
Mode
Infusion
Syringe Size
10 µL-10 mL (four)
(syringes may be
different sizes)
Maximum Flow Rate
(10 mL syringe)
20.91 mL/min
Minimum Flow Rate
0.001µL/hr
Linear Force
40 Ib (18 kg)
Advance Per Microstep
0.165 micron
Maximum Step Rate
1600 steps/sec
Minimum Step Rate
1 step/100 sec
Accuracy
< 1% error
Reproducibility
± 0.1%
Dimensions
28 x 23 x 15 cm
11 x 9 x 6 in.
Shipping Weight
12 Ib (5.4 kg) Available 95-135 V or 220-240 V, 50/60 Hz
● Syringes may be positioned independently
for sequential dispensing by the pusher
block.
SP200i
SP200iZ
SP220i
SP220iZ
SP250i
SP250iZ
####-A
####-P
Syringe
Syringe
Syringe
Syringe
Syringe
Syringe
Pump,
Pump,
Pump,
Pump,
Pump,
Pump,
Infusion (double), 95-135 V
Infusion (double), 220-240 V
Infusion (multiple), 95-135 V
Infusion (multiple), 220-240 V
Infusion (multiple, mixed volumes), 95-135 V
Infusion (multiple, mixed volumes), 220-240 V
All 240-volt pumps are CE-approved.
Audible Alarm (add “A” to end of pump part number when ordering)
Programmable Ramp Option (SP200 Series) (add “P” to pump part number when ordering)
OPTIONAL CABLES
15623
Serial cable and adapter, SP Pump-to-IBM 9-pin “D” connector
15624
Serial cable and adapter, SP Pump-to-Macintosh connector
13685
SP Pump-to-Pump “Daisy-Chain” linking cable, 7 ft
13962
Footswitch for SP200 Series Pumps
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
249
PUMPS, MICROINJECTION
Multi-Syringe Infusion Pump
SP220i
SP220i SPECIFICATIONS
Two-Syringe Infusion/Withdrawal Pump
SP210iw
The SP210iw offers you more advanced features
than any other infusion/withdrawal pump in its
price range—including five operating modes
plus independent rate and volume settings
for both infusion and withdrawal.
● All features of SP200i
● Independent rate and volume settings
for infusion and withdrawal
● Multiple mode selection: infusion,
withdrawal, infusion then
withdrawal, withdrawal then
infusion, or continuous cycle.
SP210iw SPECIFICATIONS
Mode
Infusion/Withdrawal
Syringe Size
10 µL to 140 mL (two)*
Maximum Flow Rate
145 mL/min (140 mL syringe)
Minimum Flow Rate
0.001µL/hr
Linear Force
40 Ib (18 kg)
Advance Per Microstep
0.165 micron
Maximum Step Rate
1600 steps/sec
Minimum Step Rate
1 step/100 sec
Accuracy
< 1% error
Reproducibility
± 0.1%
Dimensions
11 x 9 x 5.5 in.
28 x 23 x 14 cm
Shipping Weight
12 Ib (5.4 kg)
Available 95-135 V or 220-240 V, 50/60 Hz
PUMPS, MICROINJECTION
Multi-Syringe Infusion/Withdrawal Pump
SP230iw
Ideal for applications requiring multiple syringes, the
SP230iw is an adaptationas of the SP210iw, and has
been modified to hold up to 10 syringes.
● SP230iw has all features of SP210iw
● The multiple syringe holder
accommodates 10 syringes up
to 10 mL, or six syringes up to
50 mL, or four syringes up to
140 mL.
SP230iw SPECIFICATIONS
SP230iw
Mode
Infusion/Withdrawal
Syringe Size
10 µL to 10 mL (ten)
10 µL to 60 mL (six)
10 µL to 140 mL (four)*
Maximum Flow Rate
21 mL/min (10 mL syringe)
Minimum Flow Rate
0.001µL/hr (10 µL Syringe )
Linear Force
40 lb (18 kg)
Advance Per Microstep
0.165 micron
Maximum Step Rate
1600 steps/sec (1/2-step)
Minimum Step Rate
1 step/100 sec
Accuracy
< 1% error
Reproducibility
± 0.1%
Dimensions
11 x 12 x 5.5 in.
28 x 30 x 14 cm
Shipping Weight
12.5 Ib (5.7 kg)
Available 95-135 V or 220-240 V, 50/60 Hz
SP210iw
SP210iwZ
SP230iw
SP230iwZ
####-A
####-P
Syringe Pump, Infusion & Withdrawal (double), 95-135 V
Syringe Pump, Infusion & Withdrawal (double), 220-240 V
Syringe Pump, Infusion & Withdrawal (multiple), 95-135 V
Syringe Pump, Infusion & Withdrawal (multiple), 220-240 V
All 240-volt pumps are CE-approved.
Audible Alarm (add “A” to pump part number when ordering)
Programmable Ramp Option (SP200 Series) OPTIONAL CABLES
15623
Serial cable, SP Pump-to-IBM 9-pin “D” connector
15624
Serial cable, SP Pump-to-Macintosh connector
15676
Serial cable, SP Pump-to-IBM 25-pin “D” connector
13685
SP Pump-to-Pump “Daisy-Chain” linking cable, 7 ft
13962
Footswitch for SP200 Series Pumps
Syringes with Luer Fitting (no needle)
WPI Part #
Volume ILS005LT
5 µL
ILS010LT
10 µL
25 µL
ILS025TLL
50 µL
ILS050TLL
100 µL
ILS100TLL
250 µL
ILS250TLL
500 µL
ILS500TLL
300035
Description
O.D.
ILS 5 µL Gas-tight Luer tip
6.5 mm
ILS 10 µL Gas-tight Luer-tip
6.5 mm
ILS 25 µL Gas-tight Luer tip*
8.0 mm
ILS 50 µL Gas-tight Teflon Luer Lock*
8.0 mm
ILS 100 µL Gas-tight Teflon Luer Lock*
8.0 mm
ILS 250 µL Gas-tight Teflon Luer Lock*
8.0 mm
ILS 500 µL Gas-tight Teflon Luer Lock*
8.0 mm
6/32 stability button for SP200 Series pumps
*Has 6/32 button thread. The 6/32 stability button allows the SP series pumps to drive the syringe plunger in a precise direction to
minimize variations in the syringe body/plunger offset.
ILS is a trademark of Innovative Labor Systeme.
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
250
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Two-Syringe Push-Pull Pump
SP120p
SP120p SPECIFICATIONS
A second syringe mount has been added
to the basic SP100i, with both syringes
activated by a single pusher block
for simultaneous infusion and
withdrawal. This pump has all the
features of the SP100i, plus:
● Holds two syringes, from 10 µL
to 10 mL.
Four-Syringe Push-Pull Pump
SP260p single cycle
Mode
Infusion/Withdrawal
Syringe Size
10 µL to 10 mL (two)
Maximum Flow Rate
(10 mL syringe)
125 mL/hr
Minimum Flow Rate
(10 µL Syringe )
0.1 µL/hr
Linear Force
20 lb (9 kg)
Advance Per Microstep
0.529 micron
Maximum Step Rate
(1/2-step)
400 steps/sec
Minimum Step Rate
1 step/30 sec
Accuracy
< 1% error
Reproducibility
± 0.1%
Dimensions
9 x 6 x 5.5 in.
23 x 15 x 14 cm
Shipping Weight
8 Ib (3.6 kg)
Available 95-135 V or 220-240 V, 50/60 Hz
PUMPS, MICROINJECTION
The SP260p can hold up to four syringes. As two syringes are infusing, two other
syringes are withdrawing at the same rate. The SP260p is used for single-cycle
applications only.
●Knob locks/unlocks drive block for ef­fort­less, drag-free ad­just­ment
●Simple menu-driven setup: Syringe di­am­eter (se­lect­ed from dis­played table), Dis­pense
vol­ume, Dis­pense flow rate
● Continuous dispense volume display
● Preset volume control and automatic shutoff
● Settings can be reviewed or changed dur­ing oper­a­tion
● Optical encoder stall detection
● Choice of unit selection
● Last settings stored in permanent mem­o­ry
● Built-in RS-232C interface for com­put­er link­ing or “dai­sy chain­ing” up to 100 pumps.
● TTL interface for foot switch, timer, re­lay con­trol; out­puts for run in­di­ca­tor, valve
control
Continuous Cycle Syringe Pump
SP210c
The SP210c can hold up to four syringes and can
cycle continuously back and forth in a push-pull
SP260p & SP210c
SPECIFICATIONS
Mode
SP260p
SP210c
Push-Pull (single cycle)
Infusion/Withdrawal (continuous)
Syringe Size
SP260p
SP210c
10 µL-60 mL (four)
10 µL-60 mL (four)
●Holds four syringes, 10 mL to 60
mL each. With larger syringes the
full volume may not be usable. [With
a 60 mL syring, 40 mL is usable; with a 30 mL
syringe, the full volume is usable.]
Maximum Flow Rate
SP260p
SP210c
action. As two syringes are infusing, two other
syringes are withdrawing at the same rate.
At the end of the set volume the direction is
automatically reversed and the next cycle begins.
With the use of 2-way valves, the pump can
empty and refill syringes for a continuous
dispense.
86 mL/min (60 mL syringe)
86 mL/min (60 mL syringe)
Minimum Flow Rate
0.001µL/hr
Linear Force
40 Ib (18 kg)
Advance Per Microstep
0.165 micron
Maximum Step Rate
1600 steps/sec
Minimum Step Rate
1 step/100 sec
Accuracy
< 1% error
Reproducibility
± 0.1%
Dimensions
11 x 9 x 5.5 in.
28 x 23 x 14 cm
Shipping Weight
12 Ib (5.4 kg)
Available 95-135 V or 220-240 V, 50/60 Hz
SP120p
SP120pZ
SP260p
SP260pZ
SP210c
SP210cZ
####-A
####-P
Syringe
Syringe
Syringe
Syringe
Syringe
Syringe
Pump,
Pump,
Pump,
Pump,
Pump,
Pump,
Infusion-Withdrawal (double), 95-135 V
Infusion-Withdrawal (double), 220-240 V
Infusion-Withdrawal (double) Single Cycle Action, 95-135 V
Infusion-Withdrawal (double) Single Cycle Action, 220-240 V
Infusion & Withdrawl (Continuous Action), 95-135 V
Infusion & Withdrawl (Continuous Action), 220-240 V
All 240-volt pumps are CE-approved.
Audible Alarm (add “A” to pump part number when ordering)
Programmable Ramp Option (SP200 Series) (add “P” to end of pump part number when ordering)
OPTIONAL CABLES
15623
Serial cable and adapter, SP Pump-to-IBM 9-pin “D” connector
15624
Serial cable and adapter, SP Pump-to-Macintosh connector
13685
SP Pump-to-Pump “Daisy-Chain” linking cable, 7 ft
13962
Footswitch for SP200 Series Pumps
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
251
UltraMicroPump III
Micro syringes are easily installed —
just snap the barrel into the clamps.
UMP3 accepts a range of syringes from
0.5 µL to 1 mL.
Manipulator not included.
PUMPS, MICROINJECTION
Three prong
syringe holder for
more stability
Now with
microstepping
Controller now has higher resolution
and is virtually pulse-free
This versatile injector uses microsyringes to deliver picoliter volumes
Perfect for a wide range of applications
including intracellular injection, micro
delivery of biochemical agents or dyes, cell
separation, and in vitro fertilization.
See “Reproducible and Efficient Murine CNS Gene Delivery
Using a Microprocessor Controlled Injector,” A.I. Brooks et
al., Journal of Neuroscience Methods, 80 (1998) 137-147.
ULTRAMICROPUMP SPECIFICATIONS
(based on 10 µL syringe)
NORMAL MODE
TOTAL # OF STEPS
20,000 (63 mm travel)
MINIMUM DISPENSING VOLUME
0.58 nL / step
LINEAR MOTION PER STEP
3.175 microns
WEIGHT
325 g (11.5 oz)
MOUNTING ROD DIAMETERS
Mains power supply 7.9 mm (0.31 in.)
90-264VAC @ 47-63Hz
DIMENSIONS
MICROSTEPPING MODE
Precision is increased eight fold
ø 32 mm x 190 mm
(ø 1.3 in. x 7.5 in.)
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
252
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
The world’s leading ultramicropump!
With its digital con­trol­ler, UltraMicroPump III can dispense as little
as 600 picoliters per in­cre­men­tal ad­vance of the syringe piston (us­ing a
5‑µL syringe). Sy­ringes may be filled externally and then in­sert­ed into the
pump or filled while mount­ed in the pump. Fluids injected or withdrawn
are held en­tire­ly with­in the micro syringe to maintain a low fluid dead
vol­ume.
For po­si­tion­ing, the
UltraMicroPump III
may be attached to any
of sev­er­al WPI mi­cro­
po­si­tion­ers such as
the M3301 (man­u­al),
DC3001 (mo­tor­ized), or
any manual stereotaxic
manipulator.
Smart Controller
An Integral component in the UMPIII system is a microprocessor-based
con­trol­ler, SYS-Mi­cro4, which provides an “in­tel­li­gent” and easy-to-use
interface to up to four sy­ringe pumps. Operating pa­ram­e­ters are set with
the mem­brane key­pad and LCD display. From the key­pad the user can
select the following func­tions: set pump to in­fu­sion or with­draw­al mode,
enter the vol­ume to be in­fused or with­drawn, rate of de­liv­ery, and syringe
type as well as syn­chro­nize the start­ing and stopping of any com­bi­na­tion
of sy­ringe pumps.
User parameters can be stored in the device’s “non-vol­a­tile” mem­o­ry for
in­stant re­call when the unit is powered on.
An optional footswitch can be plugged into a connector on the rear of
the controller for “hands free” start‑/‑stop operation.
Computer Control—An RS-232 port on the rear of the controller
can be used to con­nect it to a computer for use with computer control
programs.
UMPIII ACCEPTS: glass syringes with barrel diameters from 5.5 to 9 mm.
UltraMicroPump III (one) and Micro4 Controller
UltraMicroPump III (two) and Micro4 Controller
UltraMicroPump III (three) and Micro4 Controller
UltraMicroPump III (four) and Micro4 Controller
UltraMicroPump III (without controller)
Micro4 Controller, Four-Channel
PUMPS, MICROINJECTION
UMPIII shown
mounted to
stereotaxic frame
(not included).
UMP3-1
UMP3-2
UMP3-3
UMP3-4
UMP3
SYS-MICRO4
OPTIONS AND ACCESSORIES
15867
Footswitch for Micro4
40500
RS-232 Cable, 9-pin “D” connector
502201
V-clamp for Stereotaxic Frame
503301
Extension Cable, miniDIN (male-female) 8 ft
Microvolume Syringes
Syringes with Luer Fitting (no needle)
WPI P/N
Volume
ILS005LT 5 µL
ILS010LT 10 µL
ILS025LT 25 µL
SGE050TLL 50 µL
SGE100TLL 100 µL
SGE250TLL 250 µL
Description
ILS 5 µL Gas-tight Luer tip
ILS 10 µL Gas-tight Luer tip
ILS 25 µL Gas-tight Luer tip
SGE 50 µL Gas-tight Teflon Luer Lock
SGE 100 µL Gas-tight Teflon Luer Lock
SGE 250 µL Gas-tight Teflon Luer Lock
O.D.
6.5 mm
6.5 mm
8.0 mm
8.0 mm
8.0 mm
8.0 mm
UMP2
Y
Y
Y
Y
Y
N
UMP1
N
N
N
Y
Y
N
O.D.
8.0 mm
8.0 mm
8.0 mm
8.0 mm
8.0 mm
8.0 mm
8.0 mm
UMP2
Y
Y
Y
Y
Y
Y
Y
UMP1
Y
Y
Y
Y
Y
Y
Y
Syringes with Replaceable Beveled Needles
WPI P/N
Volume
SGE0005RN* 0.5 µL
SGE001RN* 1.0 µL
SGE005RN 5 µL
SGE010RNS10 µL
SGE025RN 25 µL
SGE050RN 50 µL
SGE100RN 100 µL
Description
SGE 0.5 µL 23 ga (0.63 mm) 70 mm long
SGE 1.0 µL 26 ga (0.47 mm) 70 mm long
SGE 5 µL 23 ga (0.63 mm) 50 mm long
SGE 10 µL 26 ga (0.47 mm) 50 mm long
SGE 25 µL 25 ga (0.50 mm) 50 mm long
SGE 50 µL 25 ga (0.50 mm) 50 mm long
SGE 100 µL 25 ga (0.50 mm) 50 mm long
* The plunger extends to the tip of the needle, displacing the full sample during injection - which gives the syringe zero dead volume.
The barrel length of this syringe is 17 cm long vs. the usual 8-9 cm.
SGE and ILS are respective trademarks of Scientific Glass Engineering and Innovative Labor Systeme.
Replacement Needles
RN0005
RN001
RN005
RN010
RN025
For
For
For
For
For
syringe SGE0005RN, 23 ga (0.63 mm) 70 mm long
syringe SGE001RN, 26 ga (0.47 mm) 70 mm long
syringe SGE005RN, 23 ga (0.63 mm) 50 mm long
syringe SGE010RN(S), 26 ga (0.47 mm) 50 mm long, 5-pack
syringes SGE025RN, SGE050RN, SGE0100RN, 26 ga (0.47 mm) 50 mm long, 5-pack
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
253
Eagle™ Adjustable Pipetters
n.
Comfortable ergonomic desig
Lasts 20 times Longer.
PUMPS, MICROINJECTION
● Superior WPI seals give reliable and accurate
experimental results.
● Calibration interval can be significantly
increased.
● Priced so affordably that everyone in the lab
can have a set.
● Customize your set by selecting only the
pipetters you need.
Buy any set of 5 or 6
and get one free!
Sets ES5, ES6, and ES7 include your selection of pipetters, along with a stand
(#14239) for convenient storage. Simply specify the pipetters you want by
including the letter designation from the chart on the right. For example, ES5AABCD would include two E2s and one each E10, E20 and E100.
Model
Volume Range
Price
A
E2
0.2 - 2.0 µL
US$
B
E10
0.5 - 10 µL
US$
C
E20
2 - 20 µL
US$
D
E100
20 - 100 µL
US$
E
E200
50 - 200 µL
US$
F
E1000
100 - 1000 µL
US$
G
E5000
1000 - 5000 µL
US$
114
114
114
114
ES5
ES6
ES7
500801
Pipetters (set of any 5) and Stand
Pipetters (set of any 6) and Stand
Pipetters (set of any 7) and Stand
Filters for E5000 (5-pack)
STORAGE
500876
500877
14239
6 Pipetter Rack Stand
Pette-Clamp, 3/pkg
Original Pipetter Stand
569
661
US$
748
US$
17
US$
US$
40
40
US$
91
US$
US$
114
Replacement parts
114
114
Replacement parts for the Eagle Pipetters are available from our
website at www.wpiinc.com or call us for details.
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
254
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Universal Pipette Tips
s
nd e!
a
r
b
ric Ultra-clear and certified RNase/DNase-free
ing he p
d
t
a
s le half
                  Universal Tips
a
e out
m
Tip Volume
For Pipetter
Bulk
Part No. Price
Rack
Sa t ab
a
Eagle
E2
—
0.1 - 10 µL
Eagle E10
Eagle E20
Bag of 1000
500191
US$
Part No.
Price
17
960 (10 racks of 96)
500192
US$
17
960 (10 racks of 96)
500194
US$
20
1000 (10 racks of 100)
500196
US$
17
500 (10 racks of 50)
500198 *
US$
5 - 200 µL
Eagle E20
Eagle E100
Eagle E200
Bag of 1000
500193
US$
100 - 1000 µL
Eagle E1000
Bag of 1000
500195
US$
500 - 5000 µL
Eagle E5000
Bag of 250
500197 *
US$
35
35
40
63
500197
500198
500191, 500192
500193, 500194
500195, 500196
Tip Volume
For Pipetter
Rack
Part No.
Price
0.1 - 10 µL
Eagle E2
Eagle E10
Eagle E20
Bulk
Part No.
960 (10 racks of 96)
500199
US$
10 - 200 µL
Eagle E20
Eagle E100
Eagle E200
960 (10 racks of 96)
500200
US$
100 - 1000 µL
Eagle E1000
1000 (10 racks of 100)
500201
US$
500199
Price
69
75
75
500200
                  Universal Gel Loader Tips (flexible)
500201
Tip Volume
For Pipetter
0.1 - 10 µL (Flat)
0.17 mm OD
Eagle E2
Eagle E10
Eagle E20
0.1 - 10 µL (Flat)
0.37 mm OD
Eagle E2
Eagle E10
Eagle E20
0.1 - 10 µL
(Round)
0.57 mm OD
Eagle E2
Eagle E10
Eagle E20
0.5 - 200 µL
(Round)
0.57 mm OD
Eagle E20
Eagle E100
Eagle E200
0.5 - 200 µL
(Flat)
0.37 mm OD
Eagle E20
Eagle E100
Eagle E200
Bulk
Part No.
ABC
ABC
ABC
ABC
ABC
ABC
ABC
ABC
ABC
ABC
Bag of 1000 ABC500205
ABC
Price
35
US$
Rack
Part No.
200
500202
US$
200
500203
US$
200
500204
US$
200
500206
US$
200
500207
US$
500202
Price
46
46
23
23
46
500205
500206
500203
500207
500204
WPI’s Universal Pipette Tips are for use with Eagle and most other pipetters, including Gilson, Oxford Benchmate, Socorex, and SealPette.
* Tips 500197 and 500198 fit Eagle, Eppendorf, and BioHit pipetters.
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
255
PUMPS, MICROINJECTION
                  Universal Filter Tips (sterile)
Pneumatic PicoPumps
Repeatable microinjection in volumes ranging from picoliters to nanoliters
Designed to simplify intracellular injection and a variety of other
micro­in­jec­tion tasks, WPI's PicoPumps use carefully regulated air pres­
sures for se­cur­ing cells and injecting them with fluid. Injected volumes
range from picoliters to nanoliters. Separate ports supply positive and
negative pressure—pos­i­tive pressure for high-pressure ejection, and suction for supporting the cell or for filling the pipette from the tip. A second
pressure port maintains a low positive “holding” pres­sure to the injecting
pipette between injection pulses, to prevent fluid up­take through capillary
action or diffusion. Timing, ejection pressure, hold­ing pressure, and suction
are adjusted inde­pen­dent­ly by control knobs and in­di­ca­tor gaug­es on the
front panel. Injection pressure is controlled by a 20-turn regulator on the
front panel. A built-in timing circuit allows precise control of the amount of
time that the injection pressure is applied to the output port. Time intervals
can range from 10 seconds down to 10 ms or less, depending on the eject
pressure setting. The injection pressure interval can be triggered manually
on the front panel, by footswitch, or by computer controlled TTL pulse. A
5‑volt mon­i­tor output provides a logic-level pulse for your computer or
oth­er mon­i­tor­ing device.
PUMPS, MICROINJECTION
The most recognized picopump in the world!
For a complete list of pre-pulled micropipettes, see µTips™, or call us with your special requirements.
PV830 — Eject pressure, Hold pressure, and Vacuum are all available,
controlled by separate reg­u­la­tors on the front panel. Eject pressure
supplies a high-pressure pulse for injecting fluid. Hold pressure, which
is not sufficient to cause fluid ejection, is used to prevent back filling of
the pipette by capillary action or diffusion when the solenoid is inactive.
Pressure in the injection pipette is au­to­mat­i­cal­ly switched between Eject
and Hold pressure by a precision timing circuit that controls a solenoid
valve. Vacuum is used to fill pi­pettes from the tip or to secure a floating
cell during microinjection. Vacuum is regulated the same way, by a 20turn knob on the front panel. Vacuum may be switched from regulated
vacuum to at­mo­sphere by using the pneu­mat­ic toggle on the front panel.
Vacuum can also be routed to the eject port.
Each PicoPump is supplied with two PicoNozzle Kits (5430-ALL) plus tubing to connect the
holders to the pressure and vacuum ports.
SYS-PV820 PicoPump w/ hold pressure
SYS-PV830 PicoPump w/ hold pressure and vacuum
Specify line voltage All PicoPumps require external vacuum source — see below.
New PicoNozzle Kit 5430-ALL (included)
allows micropipettes to be securely mount­ed
in micropositioners for stable axial air
delivery. Because air enters the pipette
axially, lateral whipping during injection is
eliminated.
OPTIONAL ACCESSORIES
3260
Foot Switch
2932
Rack Mount Kit, 31⁄ 2-in. high (PV820)
2933
Rack Mount Kit, 51⁄4-in. high (PV830)
5430-10
PicoNozzle Kit (MPH6S for 1.0 mm pipette & 5-ft tubing assembly)
5430-12
PicoNozzle Kit (MPH6S for 1.2 mm pipette & 5-ft tubing assembly)
5430-15
PicoNozzle Kit (MPH6S for 1.5 mm pipette & 5-ft tubing assembly)
5430-20
PicoNozzle Kit (MPH6S for 2.0 mm pipette & 5-ft tubing assembly)
5430-ALL PicoNozzle Kit (for 1.0, 1.2, 1.5, and 1.65 mm pipettes & 5-ft tubing assembly)
MPH6S
Micropipette Holder (specify 1.0, 1.2, 1.5 or 2.0 mm)
MPH6R
Micropipette Holder (specify 1.0, 1.2, 1.5 or 2.0 mm)
3316
Replacement Input Kit
See NanoFil™ — page 260
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
256
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
PV820 offers separate regulated Hold and Ejection pres­sure, used
to maintain a low pressure in the pipette between injections to pre­vent
unwanted fluid uptake by capillary action or dif­fu­sion. A pre­ci­sion timing
circuit switches from Eject pressure to Hold pres­sure au­to­mat­i­cal­ly, once
timing has been set. Al­though reg­u­lat­ed vac­u­um is not pro­vid­ed in this mod­el,
suction can be pro­vid­ed by con­nect­ing a vac­u­um source to the vac­u­um port
on the rear pan­el. Suc­tion is then available through the pres­sure ports.
PICOPUMP SPECIFICATIONS
PV820
PV830
Pressure Input
Pressure Output
Lowest Regulated Pressure
Regulator Accuracy
Regulator Repeatability
Gauge Accuracy
Input Connector
Output Connector
Control
0 to 150 psi
0.3 to 90 psi *
12 in. water *
0.1% (20-turn dial) *
0.05 psi *
3% at full scale *
Quick Connect (1⁄4 in. OD Tubing)
Barbed (1⁄16 in. ID Tubing)
Solenoid
* Both Hold and Eject Pressures 0 to 150 psi
0.3 to 90 psi
12 in. water
0.1% (20-turn dial) *
0.05 psi *
3% at full scale *
Quick Connect (1⁄4 in. OD Tubing)
Barbed (1/16 in. ID Tubing)
Solenoid
* Both Hold and Eject Pressures
0 to 30.0 in. Hg
Unregulated
Unregulated
Unregulated
Unregulated
None
Quick Connect (1⁄4 in. OD Tubing)
Barbed (1⁄16 in. ID Tubing)
Manual
Atmosphere
0 to 30.0 in. Hg
0.2 to 29.9 in. Hg
3 in. water
0.1% (20-turn dial)
0.03 in. Hg
3% at full scale
Quick Connect (1⁄4 in. OD Tubing)
Barbed (1⁄16 in. ID Tubing)
Manual
Atmosphere
PUMPS, MICROINJECTION
PRESSURE
VACUUM
Vacuum Input
Vacuum Output
Lowest Regulated Vacuum
Regulator Accuracy
Regulator Repeatability
Gauge Accuracy
Input Connector
Output Connector
Control
Vent
CONNECTIONS INCLUDED
Input Kit
Output Kit
10 ft nylon tubing (0.25” OD, 1000 psi), one 1⁄2” female NPT adapter
Two PicoNozzle assemblies, each consisting of one MPH6S pipette holder, 60-in. of PVC tubing (200 psi), and a luer-fitted aluminum handle.
PHYSICAL SPECIFICATIONS
Power
Dimensions
Shipping Weight
95-135 V or 220-240 V, 50/60 Hz
17 x 3.5 x 9.5 in. (43 x 9 x 24 cm)
11 lb (5 kg)
Application Example:
Using PV830 for holding and injection of cells
95-135 V or 220-240 V, 50/60 Hz
17 x 5.25 x 9.5 in. (43 x 13 x 24 cm)
14 lb (6.3 kg)
Pressure Manometers
—see page 259
.
Luer-to-Tubing Coupler
Assortment Kits
—see page 184
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
257
Nanoliter Injector
For oocyte injection and applications in the 2 to 70 nanoliter range
PUMPS, MICROINJECTION
NANOLITER 2000
Micromanipulator not included.
Shaft diam.
8.2 mm
Adapter #500778 (included
free) extends the “reach” of a
manipulator-mounted injector.
NANOLITER 2000
SPECIFICATIONS
INJECTION VOLUME
Variable
REMOTE CONTROL
Yes
GLASS OD
1.14 mm
GLASS ID
0.5 mm
STEP
12.7 µ/step
INJECTION SPEED
Slow
23 nL/sec
Fast
46 nL/sec
FILL SPEED
Slow
23 nL/sec
Fast
46 nL/sec
EMPTY SPEED
92 nL/sec
VARIABLE VOLUME RANGE
2.3 - 69.0 nL
SMALLEST VOLUME
2.3 nL
TO CHANGE VOLUME
Set switch
INJECTIONS PER FILLING, MAX. 100 injections
SHIPPING WEIGHT
3 lb. (1.1 kg)
WPI’s microprocessor-controlled
Nanoliter 2000 uses direct pis­ton
dis­place­ment. By either push­ing
the injection button on the control
box or press­ing on the optional
footswitch, a calibrated volume will
be smooth­ly injected. The pro­cess
is quiet and vibra­tion free. Capillary
filling and injection speeds are 23
nL/sec and 46 nL/sec (emptying
speeds are 92 nL/sec and 230 nL/
sec). Maximum flu­id ejec­tion is 5 µL.
Each unit comes with suffi­cient glass
to pull at least 300 tips. Glass is 1.14
mm O.D. (nominal) and 0.5‑mm I.D.
By setting the DIP switch, the
injection vol­ume can be changed
from 2.3 to 69.0 nL in 16 steps. Up
to 100 injections may be triggered
per filling. Since the volume of a
normal Xenopus oo­cyte is about
500 nL, the instrument has the
capability to inject from less than
1% to over 10% of the total volume
of the oocyte in one preset step
increment.
Included: 1 vial 3.5 in. capillaries
(100); 1 vial 7 in. cap­il­lar­ies (100);
replacement “O” rings; Allen wrench;
MicroFilTM MF34G backfilling needle;
and two sample µTip™ pre-pulled
mi­cropi­pettes.
Smart Controller: Mi­cro4, an optional microprocessor-based con­trol­ler,
can provide an “in­tel­li­gent” and easy-to-use interface to up to four Nanoliter
Injectors. Operating pa­ram­e­ters are set with the mem­brane key­pad and LCD
display. From the key­pad the user can set pump to in­fu­sion or with­draw­al
mode, enter the vol­ume to be in­fused or with­drawn, and rate of de­liv­ery,
as well as syn­chro­nize the start­ing and stopping of a
com­bi­na­tion of Injectors. User parameters
can be stored in the device’s
“non-vol­a­tile” mem­o­ry
for in­stant re­call when
the unit is powered on.
An optional footswitch
can be plugged into a
connector on the rear of
the controller for “hands
free” start/stop operation.
An RS-232 port on the
rear of the controller can
be used to con­nect it to
a computer for use with
computer control pro­grams.
Optional smart controller
for Nanoliter 2000
(order as B203MC4)
WPI rec­om­mends the following equipment for a complete sys­tem,: PZMIII ste­reo mi­c ro­scope • MMJ joystick
mi­c ro­ma­n­ip­u­la­tor • M10 magnetic base • µTip™ mi­c ropi­pettes.
B203XVY
Nanoliter 2000 (120 V, U.S. plug)
B203XVZ
Nanoliter 2000 (240 V, Continental plug)
B203XVB
Nanoliter 2000 (240 V, British plug)
B203MC4
Nanoliter Injector & Micro4 Controller (small controller not included)
OPTIONAL ACCESSORIES
13142
Footswitch for Nanoliter 2000
15867
Footswitch for Micro4 Controller
4878
Replacement 3.5-in. glass capillaries (300)
4879
Replacement 7-in. glass capillaries (300)
TIP10XV119 Micropipettes for Nanoliter Injector (10)
SYS-MICRO4 Micro4 Controller, Four-Channel
300033
Adapter for Micro4
5340
Spare Parts Kit (includes MicroFilTM MF34G, displacement piston, five O-ring sets)
500778
Replacement Nanoliter Injector Universal Adapter
502859
Flared O-Ring Kit
500299
Pistons, 5-pack
503066
Flared Glass, 100 pieces
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
258
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Manual Microsyringe Pump
The MMP and DMP are convenient tools for
precise manual injection of fluid using glass
pipettes or similar injection devices. The design
allows visual feedback of flow at the pipette tip.
They can also be used as a manual micro syringe
pump for perfusion or withdrawal of liquids.
The resolution of the injection volume can be
continuously varied from 10 nanoliters to the
microliter range, depending on the syringe used.
Either oil or air can be used as the transfer media
to assist the injection of fluid. The DMP comes with
an exclusive digital micrometer that will allow the
reading of piston advancement easily with a 0.001millimeter resolution. The optional software and
cable kit can transmit advancement data directly
into computer. Model MMP has the traditional mechanical micrometer head
with a resolution of 10 microns per division and advances 500 micrometers per
revolution. The entire frame body of the injector is constructed with polished
25 mm
Advances Resolution
0.001 mm for DMP and 0.01 mm for MMP
Syringe Size
10 µL to 1 mL gas tight luer tip syringe
Tubing
1.5 m of PTFE tubing with 0.5 mm ID
Pipette Holder
0.24" x 5.2"
Pipette Holder Fits
1.0 to 1.5 mm OD pipette
Pressure Manometer
stainless steel for excellent stability and durability. The piston of the micrometer
can be slid across the rail to the syringe's plunger position. Small diameter
PTFE tubing is used to improve the accuracy and solution compatibility. The
unique design of the pipette holder can securely hold any pipette with an
outer diameter of between 1.0 mm and 1.5 mm. All necessary accessories for
removing air and filling the syringe and tubing with liquid are included. The
system comes complete with a 100 µL gas tight syringe and other syringe sizes
can be purchased.
MMP
Manual Microsyringe Pump
DMP
Manual Microsyringe Pump with Digital Display
Accessories
MMP-KIT
Injection Assembly Parts Kit
Not including valve—see #14057-10, page 161)
For measuring hydrostatic pressures
SYS-PM01D
Pressure Manometer (1 psi)
Hand-held and battery
SYS-PM01R
Pressure Manometer (1 psi), Rechargeable*
operated, PM Series pressure
SYS-PM015D Pressure Manometer (15 psi)
manometers monitor vac­u­um
SYS-PM015R Pressure Manometer (15 psi), Rechargeable*
and pressure in nonaqueous
SYS-PM100D Pressure Manometer (100 psi)
fluids. An integral transducer
SYS-PM100R Pressure Manometer (100 psi), Rechargeable*
and dig­i­tal display allow
CBL102
Mini-Phone-to-BNC Cable
easy and accurate pressure
Specify line voltage
readings. Three ver­sions
*Rechargeable
versions
come
with nickel/cadmium battery and charger
measure pressures in the
range of
±1 psi, ±15
PRESSURE MANOMETER SPECIFICATIONS
psi or ±100
PM01
PM015
PM100
psi. A range
PRESSURE RANGES
±1 psi (±52 mm Hg)
±15 psi (±775 mm Hg)
±100 psi (±690 kPa)
switch allows
MAX. PRESSURE
20 psi (1035 mm Hg) 30 psi (1550 mm Hg)
150 psi (1035 kPa)
measurement
RESOLUTION
0.001 psi (0.1 mm Hg) 0.01 psi (1 mm Hg)
0.1 psi (1 kPa)
in units of psi
OUTPUT
1 V/psi 100 mV/psi 10 mV/psi
or kPa for the 100
OUTPUT RANGE
±1.0 V
±1.5 V
±1.0 V
psi version, and psi or mm
LINEARITY
0.5% full-scale
Hg for the 15 psi version. Pres­sure can be read
TEMPERATURE EFFECT
1.0% full-scale (0-70°C)
on the built-in LCD display or relayed to a chart
ZERO
Screwdriver-adjust
recorder, os­cil­lo­scope, or computer.
RESPONSE TIME
30 ms
POWER
Nine-volt battery
PM Series pressure manometers come with 4 feet
BATTERY LIFE
Alkaline, 200 hours; rechargeable, 25 hours
of 1⁄8-inch ID soft vinyl tub­ing. A mini-phone-to-BNC
RECORDER OUTPUT
Mini-phone jack, 0.141 inch (3.5 mm)
cable for the recorder output is also available (Part
OUTPUT IMPEDANCE
1 kΩ
#CBL102). Standard versions are equipped with a
Barbed, for 1/8-inch or 3/16-inch ID soft tubing
PNEUMATIC CONNECTORS
nine-volt alkaline battery.
DIMENSIONS
SHIPPING WEIGHT
3 x 6 x 1 inches (8 x 15 x 4 cm)
3 lb (1.4 kg)
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
259
PUMPS, MICROINJECTION
DMP & MMP Specifications
Travel Distance
solid stainless
steel frame
NanoFil™
Sub-microliter injection system for small animal research
PUMPS, MICROINJECTION
l The world's smallest dead volume injection syringe
l Comes with various needle sizes from 26 ga. to 36 ga.
l Versatile research applications — RPE and IO Kits
l Custom needle shapes available — blunt, sharp, beveled
l Compatible with WPI's UMP3 and PV800 series microinjection systems
NanoFil is a specially designed 10 microliter
syringe developed in response to customer
requests for improved microinjection in mice
and other small animals. It makes quantitative
nanoliter injection much easier and more
accurate than any other method currently in use.
NanoFil's low dead volume eliminates the
need for oil backfilling, a messy process which
risks contamination of the injected sample.
Injection is now simpler, and less messy, and
there is no possibility of oil contamination in
critical applications such as ophthalmology
research (see the Retinal Pigment Epithelial (RPE)
and Intra Ocular (IO) injection kits listed below).
When the inner tip diameter of a conventional
syringe is reduced to less than 100 micron,
it is very difficult to backfill the solution at a
reasonable speed. NanoFil solves this problem
by using a tip coupling mechanism that makes
it possible to change the syringe tip during
the experiment. Simply load the sample using
a larger tip, such as the 26 gauge needle
provided with the syringe, and then replace
it with a micro tip for sample injection. On
a conventional 10 microliter syringe, a solid
ring or bushing is permanently bonded to
the tubing. Replacing the tip in middle of the
experiment is not practical. With the NanoFil,
tips can be exchanged by a simple twist of
the brass lock, gently pulling out the tip, and
replacing with the desired new tip. To secure
the tip, NanoFil uses an olive shaped silicon
gasket that is similar to, but much sturdier than,
some of the microelectrode holders used for
electro physiology recording. The silicone gasket
makes it possible to hold not only metal tips
but also glass and quartz tubing. Many types of
tubing can be easily connected to the syringe
as long as the outer diameter (OD) is close
to, but not more than, the inner diameter (ID)
of the inside barrel. Flexible quartz capillaries
used in Gas Chromotography (GC) and Capillary
Electrophoresis (CE) can also be easily coupled
to the syringe.
Specially designed tips as small as 36 gauge
(110 micron OD) are offered in both blunt and
beveled styles. Our studies have shown that
these tips will cause less trauma to the tissue
than any other form of micro syringe currently in
use. NanoFil has a unique coupling mechanism
that allows many different forms of small tubing
and tips to be coupled with the syringe barrel.
NANOFIL
NanoFil Syringe, 10 microliter
NANOFIL-100
NanoFil Syringe, 100 microliter
NanoFil syringe does not contain any injection tips, those must be purchased separately.
It does include a 26 gauge beveled needle for backfilling.
REPLACEMENT BACKFILL NEEDLES
NF26BV-2
26G Beveled Needle (package of 2)
Selecting the correct tip for your application
Using NanoFil in different configurations
Direct injection by hand: This is the simplest and most
economical way to inject. Any of our tips can be inserted directly
into the NanoFil syringe. Even the SilFlex tubing can be inserted to
switch from hand injection to the other methods listed below. The
limitation of this method is the difficulty achieving sub microliter
resolution.
Installed on WPI’s UMP-III microsyringe pump: This will allow
the user to achieve nanoliter resolution and reproducibility. For
neural system injection, mount the UMPII on a stereotaxic frame.
SilFlex tubing and holder: The needle is mounted on a small
plastic holder that is connected to the NanoFil by a 35 cm length
of flexible tubing. The NanoFil is mounted on the UMP II pump.
This configuration allows the user to hold the animal in one hand
and insert the needle with the other. When the needle reaches
the desired location, activate the pump using the footswitch and
the pre-programmed injection volume will be delivered. This
configuration gives a nanoliter level of accuracy and reproducibility.
It is best suited for applications such as the RPE and IO injection.
The replaceable needles used with the NanoFil are available with either
blunt or beveled tips. The blunt tip is used for injection into soft tissue and
when a uniform solution distribution is needed. The beveled style is used
for applications that involve the penetration of a tough tissue.
One of the main factors that limit the resolution and accuracy of
conventional micro syringes to the upper tens of nanoliters range is
diffusion in the large tip ID. When the tip ID is equal or larger than 100
micron, the error caused by tip diffusion is in the nanoliter range level
((100 micron)^3 = 1 nanoliter). With a 36 gauge needle installed on the
NanoFil, the error caused by diffusion will be reduced to the sub nanoliter
level, making accurate injection of a nanoliter possible.
All of WPI’s beveled tips have a unique 25 degree tri-surface bevel that
is optimized for microinjection. A 10 degree single-surface beveled tip
penetrates better than one with a 25 degree angle, however the distance
between the upper opening to the tip (see section “F” in Fig. 2) is longer.
As a result, it requires a deeper penetration of the tip to achieve the same
level of liquid delivery. Deeper penetration means more tissue damage.
WPI’s unique 25 degree beveled tip solves this problem with two extra
beveled surfaces. The tip of a single surface beveled tip is actually a
blade instead of a point. It dulls very quickly. In contrast, the tri-surfaced
tip has a real point. It not only penetrates much better but is also much
more durable. Our tests show that our 33 gauge, 25 degree beveled tip
penetrates easier and lasts longer than other manufacturer’s 33 gauge,
10 degree single beveled tips. With a 35 gauge tri-surface beveled tip,
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
260
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
“D”
Available Tips
“C”
“A”
“F”
A
“B”
DETAIL A
Tip Order Tip O.D. Tip I.D.
Number
“A”
“B”
Tip
Length
“C”
Total
Length
“D”
Shank
O.D.
“E”
Bevel
Total
Length Dead
“F”
Volume
NF33BV-2
10.0 mm
40.0 mm
460 μm
≈348 µm
210 μm
115 μm
1.47 nL
Tip
Material
Stainless Steel
NF34BV-2
185 μm
85 μm
5.0 mm
35.0 mm
460 μm
≈290 µm
1.39 nL
Stainless Steel
NF35BV-2
135 μm
55 μm
5.0 mm
35.0 mm
460 μm
≈204 µm
1.38 nL
Stainless Steel
NF36BV-2
110 μm
35 μm
3.0 mm
33.0 mm
460 μm
≈156 µm
1.37 nL
Stainless Steel
NF33FBV-2
200 μm
100 μm
5.0 mm
35.0 mm
460 μm
≈322 µm
1.40 nL
Titanium Alloy
NFQ34-5
160 μm
100 μm
55.0 mm
75.0 mm
460 μm
≈280 µm
0.59 nL
Quartz
NF33BL-2
210 µm
115 µm
10.0 mm
34.0 mm
460 µm
≈348 µm
1.47 nL
Stainless Steel
NF34BL-2
185 µm
85 µm
5.0 mm
29.0 mm
460 µm
≈290 µm
1.39 nL
Stainless Steel
NF35BL-2
135 µm
55 µm
5.0 mm
29.0 mm
460 µm
≈204 µm
1.38 nL
Stainless Steel
NF36BL-2
110 µm
35 µm
3.0 mm
27.0 mm
460 µm
≈156 µm
1.37 nL
Stainless Steel
NF33FBl-2
200 µm
100 µm
5.0 mm
29.0 mm
460 µm
≈322 µm
1.40 nL
Titanium Alloy
Above dimensions apply to blunt tips also.
tubing tip is made of 160 micron OD polyimide
coated quartz tubing with a special adapter
sleeve mounted at the end. It is designed for
filling glass capillary electrodes or pipettes, just
like WPI’s traditional MF34G Microfil. However,
unlike the traditional MicroFil, which has about
50 microliters of dead volume in its luer hub,
the dead volume of this tip is less than 0.6
microliters. It is useful for loading electrodes
with solutions that have a limited volume or are
too expensive to waste.
NANOFIL NEEDLEs
NF33BL-2
33 G blunt NanoFil needle (pkg of 2)
NF34BL-2
34 G blunt NanoFil needle (pkg of 2)
NF35BL-2
35 G blunt NanoFil needle (pkg of 2)
NF36BL-2
36 G blunt NanoFil needle (pkg of 2)
NF33BV-2
33 G beveled NanoFil needle (pkg of 2)
NF34BV-2
34 G beveled NanoFil needle (pkg of 2)
NF35BV-2
35 G beveled NanoFil needle (pkg of 2)
36 G beveled NanoFil needle (pkg of 2)
NF36BV-2
NF33FBL-2
33 G Flexifil blunt NanoFil needle (pkg of 2)
NF33FBV-2
33 G Flexifil beveled NanoFil needle (pkg of 2)
NF33-36BL
Assortment of 4 blunt NanoFil needles
NF33-36BV
Assortment of 4 beveled NanoFil needles
LUER FITTING NEEDLES
33 G blunt needle with luer fitting (pkg of 2)
NL33BL-2
NL34BL-2
34 G blunt needle with luer fitting (pkg of 2)
NL35BL-2
35 G blunt needle with luer fitting (pkg of 2)
NL36BL-2
36 G blunt needle with luer fitting (pkg of 2)
NL35BLR-2
35 G blunt needle right angle with luer fitting (pkg of 2)
NL33BV-2
33 G beveled needle with luer fitting (pkg of 2)
NL34BV-2
34 G beveled needle with luer fitting (pkg of 2)
NL35BV-2
35 G beveled needle with luer fitting (pkg of 2)
NL36BV-2
36 G beveled needle with luer fitting (pkg of 2)
NL33FBL-2
33 G Flexifil blunt needle with luer fitting (pkg of 2)
NF33FBV-2
33 G Flexifil beveled needle with luer fitting (pkg of 2)
REPLACEMENT PARTS & ACCESSORIEs
NFINHLD
NanoFil Injection Holder
SILFLEX-2
SilFlex tubing 35 cm long (pkg of 2) (dead volume = 2.74 µL)
NFGSK-5
Spare Silicone Gasket for NanoFil & Holder (pkg of 5)
NFQ34-5
34 Gauge Flexible Quartz Tubing for filling (pkg 5)
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
261
PUMPS, MICROINJECTION
33 gauge: This tip is similar to Hamilton’s
7762 and 7803 series removable needles in
both tip length and outer diameter. However,
our beveled tip version is shorter, more durable,
and penetrates better due to the special
tri-surface grinding technique. In the past,
33 gauge tips were the smallest size sold by
other manufacturers and were frequently cited
in literature. However, our new 35 gauge tip
is much better for injections involving small
animals, especially mice. Compared with
Hamilton’ 33 gauge, 10 degree beveled tip, our
35 gauge 25 degree beveled tip can reduce
the depth of penetration by almost 80%. The
distance between the tip and the upper rim
of the opening (section F on Figure 2) is 1024
microns for the 33 gauge tip. The distance
for our 35 gauge tip is only 230 microns.
In addition, the smaller tip size significantly
reduces the required penetration force. In nearly
all applications, a 33 gauge tip can be replaced
with our 35 gauge tip and produce better
results.
34 gauge: This is a transitional size between
the 33 gauge and 35 gauge. If the 35 gauge
is too weak and the 33 gauge is too large, this
makes a good alternative.
35 gauge: This was the most popular and
preferred tip of most scientists during our field
trial. The combination of its strength, length,
durability, and clogging resistance creates a
balance with very little compromising of the
individual properties. It is much smaller than the
33 gauge tip offered by other manufacturers. It
is only slightly larger than the 36 gauge tip but
is much stronger and less likely to be clogged.
Samples can be directly loaded with this tip. Its
5 mm length is sufficient enough for almost all
injection applications in mice.
36 gauge: This is the smallest tip that is
commercially available. The tip is so small that
it can be inserted into the opening of the 33
gauge needle tip. Because this is pushing the
limits of what current technology can produce,
there are some limitations to consider before
using. Its thin diameter makes it necessary
to limit its length to 2.5 to 3.0 mm and still
maintain a usable strength. Since the tip ID is
in the 25 to 50 micron range, it is very easily
clogged. Therefore, only well filtered solutions
can be used. Depending on the viscosity of the
sample, the user might also need to pre-load
the syringe with a regular tip before switching to
this tip for injection. We recommend using the
35 gauge tip instead of the 36 gauge unless it
is absolutely necessary.
Flexifil: The Flexifil tip is made of a titanium
alloy. The advantage of this tubing is its
durability. This “semi-flexible” tip can be bent up
to 90 degrees without damage. It is also much
more corrosion resistant than the stainless steel
tip. Saline solutions left in the tip will be less
likely to clog it. Although this tip is specified
as a 33 gauge tip, its outer diameter is slightly
smaller than our 33 gauge stainless steel tip.
Flexible Quartz Tubing : The flexible quartz
“E”
the resistance to the penetration becomes even
less. Each of our tips undergo a penetration test
before leaving the factory to guarantee the best
results for our customers.
NanoFil Application Kits
These kits are specially designed for eye research for injecting retinal pigment
epithelium (RPE) and intraocular (IO) in addition to brain injection in mice.
They need to be used with a NanoFil syringe and UMP2 to achieve accurate,
repetitive, and oil free injection in the submicroliter range. Each kit includes
two pieces of Silflex tubing (one for a spare), a holder assembly, spare gaskets,
and an assortment of four tips - blunt for the RPE kit and beveled tips for the
IO kit. Each kit comes with one each of 33, 34, 35 and 36 gauge tips so that
first time users can find the best size for their application.
PUMPS, MICROINJECTION
The Silflex tubing is the most critical component of the kit. This 35 cm long,
flexible tubing has a very precise outer diameter for airtight fitting with the
syringe. It also has a small inner diameter for minimum dead volume, and is
very durable when handled correctly. The SilFlex is coupled to the injection tip
with a mechanism similar to that of the
NanoFil. The dead volume of the entire
kit (including the tubing) is less than
3 microliters. All of the components in
the kit are constructed of inert, solvent
resistant, and autoclaveable materials
for easy cleaning after viral injection.
Recommended Accessories
RPE-KIT
Retinal Pigment Epithelium (RPE) injection kit (SilFlex
tubing, gasket, holder, and blunt tipmix)
IO-KIT
Intraocular (IO) injection kit (SilFlex tubing, holder,
gasket, and beveled tipmix)
RPE-KIT
VSP1 Syringe Pump
Stability and safety
The VSP1 Syringe Pump offers exceptional accuracy and
stability coupled with safety features that are crucial in the
animal health care environment. With 7 safety features, this
pump alerts the users when syringe is near empty, occlusion
occurs, syringe falls off, program ends, bolus completes, AV
line fails, battery is under- charged, or operation is interrupted.
The built-in rechargeable battery ensures the pump continues
VSP1 SPECIFICATIONS
FLOW RATE
0.1 – 600 mL/h
PURGE RATE
100~600 mL/h
BOLUS RATE
100~600 mL/h
ACCURACY
Nominal ±2% excluding syringe variations
SYRINGE SIZE
5 mL, 10 mL, 20 mL, 30 mL and 50/60 mL
OCCLUSION PRESSURE ALARM LIMITS
900 mmHg, 600 mmHg, 300 mmHg
BATTERY LIFE
2 hours
OPERATION TEMPERATURES
5 to 40° C
ELECTRICAL SAFETY
Class II, Type BF
AC POWER SUPPLY
100~240V at 50/60Hz
DIMENSIONS
25cm X 16cm X14cm
WEIGHT
2.5 kg
uninterrupted even in the event of an AC line voltage
failure for 2 hours. The pump can run under the flow rate
(i.e., mL/h), mass rate (i.e., mg/min), or dose rate (i.e., mg/
kg/min) and this function can be used in routine infusion,
anesthesia, and special drug protocols. This pump can
be easily mounted on a vertical or horizontal IV pole or
bedrail.
503613
VSP1 Syringe Pump
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
262
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Product Index
Item
Page
Item
Page
5451 . . . . . . . . . . . . . . . . . . . . . . . . . 98
5464. . . . . . . . . . . . . . . 209, 212, 215
5468. . . . . . . . . . . . . . . . . 18, 21, 238
5469. . . . . . . . . . . . . . . . . . . . . . . . . 18
5470 . . . . . . . . . . . . . . . . . . . . . . . . . 18
5475 . . . . . . . . . . . . . . . . . . . . . . . . 228
5479 . . . . . . . . . . . . . . . . . . . . . . . . 218
5482. . . . . . . . . . . . . . . . . . . . . . . . . 18
5483. . . . . . . . . . . . . . . . . . . . . . . . . 18
5489. . . . . . . . . . . . . . . . . . . . . . . . . . 8
6820. . . . . . . . . . . . . . . . . . . . . . . . 179
7128. . . . . . . . . . . . . . . . . . . . . . . . 179
7325 . . . . . . . . . . . . . . . . . . . . . . . . . 56
7326 . . . . . . . . . . . . . . . . . . . . . . 58, 70
7335 . . . . . . . . . . . . . . . . . . . . . . . . 179
7341 . . . . . . . . . . . . . . . . . . . . . . . . 180
7342 . . . . . . . . . . . . . . . . . . . . . . . . 180
7357 . . . . . . . . . . . . . . . . . . . . . . . . . 56
7363. . . . . . . . . . . . . . . . . . . . . . . . 176
7364. . . . . . . . . . . . . . . . . . . . . . . . 176
7521 . . . . . . . . . . . . . . . . . . . . . . . . . 56
7600 . . . . . . . . . . . . . . . . . . . . . 98, 99
13024. . . . . . . . . . . . . . . . . . . . . . . 182
13025. . . . . . . . . . . . . . . . . . . . . . . 182
13142. . . . . . . . . . . . . 235, 237, 258
13316. . . . . . . . . . . . . . . . . . . 179, 197
13324. . . . . . . . . . . . . . . . . . . . . . . 187
13338. . . . . . . . . . . . . . . . . . 225, 228
13347. . . . . . . . . . . . . . . . . . . . . . . 187
13388. . . . . . . . . . . . . . . . . . . . . . . 187
13451. . . . . . . . . . . . . . . . . . . . . . . 187
13555. . . . . . . . . . . . . . . . . . . . . . . 187
13620. . . . . . . . . . . . . . . . . . . . . . . 187
13685. . . . . . . . . . . . . . 187, 249, 251
13740 . . . . . . . . . . . . . . . . . . 175, 176
13776 . . . . . . . . . . . . . . . . . . . . . . . 187
13854. . . . . . . . . . . . . . . . . . . . . . . 187
13962. . . . . . . . . . . . . . . . . . 249, 251
14011. . . . . . . . . . . . . . . . . . . . . . . 184
14012. . . . . . . . . . . . . . . . . . . . . . . 184
14079. . . . . . . . . . . . . . . . . . . . . . . 121
14084. . . . . . . . . . . . . . . . . . . . . . . 149
14088. . . . . . . . . . . . . . . . . . . . . . . 187
14095. . . . . . . . . . . . . . . . . . . . . . . 111
14096. . . . . . . . . . . . . . . . . . . . . . . 112
14097. . . . . . . . . . . . . . . . . . . . . . . 112
14098. . . . . . . . . . . . . . . . . . . . . . . 110
14099. . . . . . . . . . . . . . . . . . . . . . . 112
14101. . . . . . . . . . . . . . . . . . . . . . . 111
14104. . . . . . . . . . . . . . . . . . . . . . . 207
14106. . . . . . . . . . . . . . . . . . . . . . . 207
14120. . . . . . . . . . . . . . . . . . . . . . . 149
14121. . . . . . . . . . . . . . . . . . . . . . . 149
14126. . . . . . . . . . . . . . . . . . . . . . . 128
14132. . . . . . . . . . . . . . . . . . . . . . . 143
14135. . . . . . . . . . . . . . . . . . . . . . . 156
14139. . . . . . . . . . . . . . . . . . . . . . . 156
14187 . . . . . . . . . . . . . . . . . . . . . . . 112
14188. . . . . . . . . . . . . . . . . . . . . . . 112
14189. . . . . . . . . . . . . . . . . . . . . . . 149
14206. . . . . . . . . . . . . . . . . . . . . . . 145
14207. . . . . . . . . . . . . . . . . . . . . . . 145
14208. . . . . . . . . . . . . . . . . . . . . . . 141
14209. . . . . . . . . . . . . . . . . . . . . . . 121
14210. . . . . . . . . . . . . . . . . . . . . . . 121
14211. . . . . . . . . . . . . . . . . . . . . . . 121
14212. . . . . . . . . . . . . . . . . . . . . . . 141
14213. . . . . . . . . . . . . . . . . . . . . . . 173
14239. . . . . . . . . . . . . . . . . . . . . . . 254
Item
Page
14254. . . . . . . . . . . . . . . . . . . . . . . 187
14342. . . . . . . . . . . . . . . . . . . . . . . 175
14361. . . . . . . . . . . . . . . . . . . . . . . 144
14364. . . . . . . . . . . . . . . . . . . . . . . 129
14404. . . . . . . . . . . . . . . . . . . . . . . 175
14405. . . . . . . . . . . . . . . . . . . . . . . 175
14444. . . . . . . . . . . . . . . . . . . . . . . 215
15590. . . . . . . . . . . . . . . . . . . . . . . 229
15623. . . . . . . . . . . . . . 187, 249, 251
15624. . . . . . . . . . . . . . 187, 249, 251
15810. . . . . . . . . . . . . . . . . . 56, 57, 58
15867. . . . . . . . . . . . . . . . . . 253, 258
15873. 205, 208, 209, 212, 214, 215
15908. . . . . . . . . . . . . . . . . . . . . . . 119
15910. . . . . . . . . . . . . . . . . . . . . . . 121
15911. . . . . . . . . . . . . . . . . . . . . . . 149
15934. . . . . . . . . . . . . . . . . . . . . . . 239
15975. . . . . . . . . . . . . . . . . . . . . . . 187
15976 . . . . . . . . . . . . . . . . . . . . . . . 187
40500. . . . . . . . . . . . . . . . . . . . . . . 253
47030. . . . . . . . . . . . . . . . . . . . . . . . 92
47050. . . . . . . . . . . . . . . . . . . . . . . . 92
47075 . . . . . . . . . . . . . . . . . . . . . . . . 93
47120. . . . . . . . . . . . . . . . . . . . . . . . 93
47330. . . . . . . . . . . . . . . . . . . . . 92, 93
47510. . . . . . . . . . . . . . . . . . . . . 57, 75
47520. . . . . . . . . . . . . . . . . . . . . 57, 75
47530. . . . . . . . . . . . . . . . . . . . . . . . 75
47540. . . . . . . . . . . . . . . . . . . . . . . . 75
47700 . . . . . . . . . . . . . . . . . . . . . . . . 91
48000. . . . . . . . . . . . . . . . . . . . . . . 239
48014. . . . . . . . . . . . . . . . . . . . . . . 239
48015. . . . . . . . . . . . . . . . . . . . . . . 239
48025. . . . . . . . . . . . . . . . . . . . . . . 239
48200. . . . . . . . . . . . . . . . . . . . . . . 239
48300. . . . . . . . . . . . . . . . . . . . . . . 239
74020 . . . . . . . . . . . . . . . . . . . . . . . . 13
74030. . . . . . . . . . . . . . . . . . . . . . . . 13
74040. . . . . . . . . . . . . . . . . . . . . . . . 13
74050. . . . . . . . . . . . . . . . . . . . . . . . 13
75040. . . . . . . . . . . . . . . . . . . . . . . 237
75050. . . . . . . . . . . . . . . . . . . . . . . 237
75070. . . . . . . . . . . . . . . . . . . . . . . 235
77020 . . . . . . . . . . . . . . . . . . . . . . . 193
83016. . . . . . . . . . . . . . . . . . . . . . . . 29
100042. . . . . . . . . . . . . . . . . . . . . . . 58
300033. . . . . . . . . . . . . . . . . . . . . . 258
300035. . . . . . . . . . . . . . . . . . . . . . 250
300040. . . . . . . . . . . . . . . . . . . . . . 187
300102. . . . . . . . . . . . . . . . . . . 18, 187
300276. . . . . . . . . . . . . . . . . . . . . . 229
300305. . . . . . . . . . . . . . . . . . . . . . . 66
500028. . . . . . . . . . . . . . . . . . . . . . 223
500046. . . . . . . . . . . . . . . . . . . . . . 139
500064. . . . . . . . . . . . . . . . . . . . . . 109
500075. . . . . . . . . . . . . . . . . . . . . . 157
500076. . . . . . . . . . . . . . . . . . . . . . 157
500077. . . . . . . . . . . . . . . . . . . . . . 157
500079. . . . . . . . . . . . . . . . . . . . . . 158
500081. . . . . . . . . . . . . . . . . . . . . . 187
500082. . . . . . . . . . . . . . . . . . . . . . 187
500085. . . . . . . . . . . . . . . . . . . . . . 110
500086. . . . . . . . . . . . . . . . . . . . . . 126
500087. . . . . . . . . . . . . . . . . . . . . . 148
500121. . . . . . . . . . . . . . . . . . . . . . 175
500126. . . . . . . . . . . . . . . . . . . . . . 176
500128. . . . . . . . . . . . . . . . . . . . . . 187
500131. . . . . . . . . . . . . . . . . . 187, 202
500133. . . . . . . . . . . . . . . . . . . . . . 160
Item
Page
500134. . . . . . . . . . . . . . . . . . . . . . 160
500135. . . . . . . . . . . . . . . . . . . . . . 160
500143. . . . . . . . . . . . . . . . . . . . . . 158
500162. . . . . . . . . . . . . . . . . . . . . . 221
500184. . . . . . . . . . . . . . . . . . . . . . 187
500186. . . . . . . . . . . . . . . . . . . . . . 228
500191. . . . . . . . . . . . . . . . . . . . . . 255
500192. . . . . . . . . . . . . . . . . . . . . . 255
500193. . . . . . . . . . . . . . . . . . . . . . 255
500194. . . . . . . . . . . . . . . . . . . . . . 255
500195. . . . . . . . . . . . . . . . . . . . . . 255
500196. . . . . . . . . . . . . . . . . . . . . . 255
500197. . . . . . . . . . . . . . . . . . . . . . 255
500198. . . . . . . . . . . . . . . . . . . . . . 255
500199. . . . . . . . . . . . . . . . . . . . . . 255
500200. . . . . . . . . . . . . . . . . . . . . . 255
500201. . . . . . . . . . . . . . . . . . . . . . 255
500202. . . . . . . . . . . . . . . . . . . . . . 255
500203. . . . . . . . . . . . . . . . . . . . . . 255
500204. . . . . . . . . . . . . . . . . . . . . . 255
500205. . . . . . . . . . . . . . . . . . . . . . 255
500206. . . . . . . . . . . . . . . . . . . . . . 255
500207. . . . . . . . . . . . . . . . . . . . . . 255
500229. . . . . . . . . . . . . . . . . . . . . . 109
500230. . . . . . . . . . . . . . . . . . . . . . 109
500231. . . . . . . . . . . . . . . . . . . . . . 110
500232. . . . . . . . . . . . . . . . . . . . . . 111
500233. . . . . . . . . . . . . . . . . . . . . . 110
500234. . . . . . . . . . . . . . . . . . . . . . 112
500235. . . . . . . . . . . . . . . . . . . . . . 112
500240. . . . . . . . . . . . . . . . . . . . . . 155
500241. . . . . . . . . . . . . . . . . . . . . . 155
500242. . . . . . . . . . . . . . . . . . . . . . 155
500243. . . . . . . . . . . . . . . . . . . . . . 155
500244. . . . . . . . . . . . . . . . . . . . . . 155
500245. . . . . . . . . . . . . . . . . . . . . . 155
500246. . . . . . . . . . . . . . . . . . . . . . 155
500247. . . . . . . . . . . . . . . . . . . . . . 155
500248. . . . . . . . . . . . . . . . . . . . . . 155
500249. . . . . . . . . . . . . . . . . . . . . . 156
500250. . . . . . . . . . . . . . . . . . . . . . 156
500252. . . . . . . . . . . . . . . . . . . . . . 173
500253. . . . . . . . . . . . . . . . . . . . . . 173
500254. . . . . . . . . . . . . . . . . . . . . . 173
500255. . . . . . . . . . . . . . . . . . . . . . 173
500256. . . . . . . . . . . . . . . . . . . . . . 187
500257. . . . . . . . . . . . . . . . . . . . . . 187
500258. . . . . . . . . . . . . . . . . . . . . . 187
500259. . . . . . . . . . . . . . . . . . . . . . 187
500261. . . . . . . . . . . . . . . . . . . . . . 223
500262. . . . . . . . . . . . . . . . . . . . . . 223
500264. . . . . . . . . . . . . . . . . . . . . . 225
500266. . . . . . . . . . . . . . . . . . . . . . 225
500280. . . . . . . . . . . . . . . . . . . . . . 180
500282. . . . . . . . . . . . . . . . . . . . . . 246
500283. . . . . . . . . . . . . . . . . . . . . . 246
500292. . . . . . . . . . . . . . . . 235, 237
500299. . . . . . . . . . . . . . . . . . . . . . 258
500313. . . . . . . . . . . . . . . . . . . . . . 154
500314. . . . . . . . . . . . . . . . . . . . . . 154
500315. . . . . . . . . . . . . . . . . . . . . . 154
500316. . . . . . . . . . . . . . . . . . . . . . 154
500317. . . . . . . . . . . . . . . . . . . . . . 154
500325. . . . . . . . . . . . . . . . . . . . . . 154
500326. . . . . . . . . . . . . . . . . . . . . . 154
500329. . . . . . . . . . . . . . . . . . . . . . 235
500330. . . . . . . . . . . . . . . . . . . . . . 202
500335. . . . . . . . . . . . . . . . . . . . . . 109
500336. . . . . . . . . . . . . . . . . . . . . . 109
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
263
PRODUCT INDEX
121 . . . . . . . . . . . . . . . . . . . . . . . . . . 20
260 . . . . . . . . . . . . . . . . . . . . . . . . . . 11
705 . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
773 . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
1358. . . . . . . . . . . . . . . . . . . . . . . . 187
1571 . . . . . . . . . . . . . . . . . . . 179, 199
1965. . . . . . . . . . . . . . . . . . . . . . . . 195
1966. . . . . . . . . . . . . . . . . . . . . . . . 195
1967. . . . . . . . . . . . . . . . . . . . . . . . 195
2478 . . . . . . . . . . . . . . . . . . . . . . . . 238
2479 . . . . . . . . . . . . . . . . . . . . . . . . 238
2505. . . . . . . . . . . . . . . . . . . . . . . . 199
2541 . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2547 . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2851. . . . . . . . . . . . . . . . . . . . . . . . 187
2932 . . . . . . . . . . . . . . . . . . . . . . . . 182
2933 . . . . . . . . . . . . . . . . . . . . . . . . 182
2935 . . . . . . . . . . . . . . . . . . . . . . . . 182
3006. . . . . . . . . . . . . . . . . . . . . . . . 187
3161 . . . . . . . . . . . . . . . . . . . . . . . . 187
3259. . . . . . . . . . . . . . . . . . . . . . . . . 28
3260. . . . . . . . . . . . . . . . . . . . . . . . 256
3294 . . . . . . . . . . . . . . . . . . . . . . . . 187
3301. . . . . . . . . . . . . . . . . . . . . . . . 187
3302. . . . . . . . . . . . . . . . . . . . . . . . 187
3316 . . . . . . . . . . . . . . . . . . . . . . . . 256
3414 . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3468. . . . . . . . . . . . . . . . . . . . . . . . 182
3469. . . . . . . . . . . . . . . . . . . . . . . . 182
3484. . . . . . . . . . . . . . . . . . . . . . . . 182
3485. . . . . . . . . . . . . . . . . . . . . . . . . . 9
3491 . . . . . . . . . . . . . . . . . . . . . . . . 187
3492 . . . . . . . . . . . . . . . . . . . . . . . . 187
3508. . . . . . . . . . . . . . . . . . . . . . . . 187
3517 . . . . . . . . . . . . . . . . . . . . . . . . 187
3531 . . . . . . . . . . . . . . . . . . . . . . . . 238
3551 . . . . . . . . . . . . . . . . . . . . . . . . 238
3578 . . . . . . . . . . . . . . . . . 21, 187, 203
3669. . . . . . . . . . . . . . . . . . . . . . . . . 97
3670 . . . . . . . . . . . . . . . . . . . . . . . . 187
3955. . . . . . . . . . . . . . . . . . . . . . . . . 97
3960. . . . . . . . . . . . . . . . . . . . . . . . . 97
3993. . . . . . . . . . . . . . . . . . . . . . . . . 83
4878 . . . . . . . . . . . . . . . . . . . . . . . . 258
4879 . . . . . . . . . . . . . . . . . . . . . . . . 258
4886. . . . . . . . . . . . . . . . . . . . . . . . 178
4898. . . . . . . . . . . . . . . . . . . . . . . . 179
5052. . . . . . . . . . . . . . . . . . . . . . . . 218
5153 . . . . . . . . . . . . . . . . . . . . . . . . . 97
5210 . . . . . . . . . . . . . . . . . . . . . . . . . 97
5233 . . . . . . . . . . . . . . . . . . . . . . . . . 97
5340. . . . . . . . . . . . . . . . . . . . . . . . 258
5361. . . . . . . . . . . . . . . . . . . . . . . . . 97
5362. . . . . . . . . . . . . . . . . . . . . . . . . 97
5371 . . . . . . . . . . . . . . . . . . . . . . . . 187
5372 . . . . . . . . . . . . . . . . . . . . . . . . 187
5373 . . . . . . . . . . . . . . . . . . . . . . . . 187
5374 . . . . . . . . . . . . . . . . . . . . . . . . 187
5375 . . . . . . . . . . . . . . . . . . . . . . . . 187
5377 . . . . . . . . . . . . . . . . . . . . . . . . . 58
5378 . . . . . . . . . . . . . . . . . . . . . . 58, 70
5399. . . . . . . . . . . . . . . . . . . . . . 56, 70
5430. . . . . . . . . . . . . . . . . . . . . . . . 256
5435 . . . . . . . . . . . . . . . . . . . . . . . . . 56
5436. . . . . . . . . . . . . . . . . . . . . . . . . 56
5440. . . . . . . . . . . . . . . . . . . . . . . . 197
5444 . . . . . . . . . . . . . . . . . . . . . . . . 199
5447 . . . . . . . . . . . . . . . . . . . . . . . . . . 8
5450. . . . . . . . . . . . . . . . . . . . . . . . . 98
PRODUCT INDEX
Item
Page
500337. . . . . . . . . . . . . . . . . . . . . . 109
500338. . . . . . . . . . . . . . . . . . . . . . 109
500339. . . . . . . . . . . . . . . . . . . . . . 110
500340. . . . . . . . . . . . . . . . . . . . . . 110
500341. . . . . . . . . . . . . . . . . . . . . . 110
500342. . . . . . . . . . . . . . . . . . . . . . 110
500343. . . . . . . . . . . . . . . . . . . . . . 148
500344. . . . . . . . . . . . . . . . . . . . . . 148
500345. . . . . . . . . . . . . . . . . . . . . . 148
500346. . . . . . . . . . . . . . . . . . . . . . 148
500347. . . . . . . . . . . . . . . . . . . . . . 148
500348. . . . . . . . . . . . . . . . . . . . . . 157
500349. . . . . . . . . . . . . . . . . . . . . . 156
500350. . . . . . . . . . . . . . . . . . . . . . 156
500351. . . . . . . . . . . . . . . . . . . . . . 156
500352. . . . . . . . . . . . . . . . . . . . . . 156
500353. . . . . . . . . . . . . . . . . . . . . . 156
500354. . . . . . . . . . . . . . . . . . . . . . 156
500355. . . . . . . . . . . . . . . . . . . . . . 156
500356. . . . . . . . . . . . . . . . . . . . . . 156
500358. . . . . . . . . . . . . . . . . . . . . . 160
500370. . . . . . . . . . . . . . . . . . . . . . 167
500372. . . . . . . . . . . . . . . . . . . . . . 141
500373. . . . . . . . . . . . . . . . . . . . . . 122
500374. . . . . . . . . . . . . . . . . . . . . . 141
500376. . . . . . . . . . . . . . . . . . . . . . 141
500377. . . . . . . . . . . . . . . . . . . . . . 122
500381. . . . . . . . . . . . . . . . . . . . . . 141
500388. . . . . . . . . . . . . . . . . . . . . . 169
500389. . . . . . . . . . . . . . . . . . . . . . 169
500390. . . . . . . . . . . . . . . . . . . . . . 169
500391. . . . . . . . . . . . . . . . . . . . . . 169
500392. . . . . . . . . . . . . . . . . . . . . . 169
500393. . . . . . . . . . . . . . . . . . . . . . 169
500394. . . . . . . . . . . . . . . . . . . . . . 169
500395. . . . . . . . . . . . . . . . . . . . . . 169
500396. . . . . . . . . . . . . . . . . . . . . . 169
500397. . . . . . . . . . . . . . . . . . . . . . 171
500448. . . . . . . . . . . . . . . . . . . . . . 160
500450. . . . . . . . . . . . . . . . . . . . . . 159
500453. . . . . . . . . . . . . . . . . . . . . . 122
500455. . . . . . . . . . . . . . . . . . . . . . 122
500457. . . . . . . . . . . . . . . . . . . . . . 123
500458. . . . . . . . . . . . . . . . . . . . . . 161
500460. . . . . . . . . . . . . . . . . . . . . . 161
500462. . . . . . . . . . . . . . . . . . . . . . 160
500475. . . . . . . . . . . . . . . . . 212, 213
500476. . . . . . . . . . . . . . . . . 212, 213
500778. . . . . . . . . . . . . . . . . . . . . . 258
500787. . . . . . . . . . . . . . . . . . . . . . . 95
500788. . . . . . . . . . . . . . . . . . . . . . . 95
500789. . . . . . . . . . . . . . . . . . . . . . . 95
500871. . . . . . . . . . . . . . . . . . . . . . 217
500876. . . . . . . . . . . . . . . . . . . . . . 254
500877. . . . . . . . . . . . . . . . . . . . . . 254
500890. . . . . . . . . . . . . . . . . . . . . . 184
500895. . . . . . . . . . . . . . . . . . . . . . 184
501075. . . . . . . . . . . . . . . . . . . . . . 171
501083. . . . . . . . . . . . . . . . . . . . . . 171
501090. . . . . . . . . . . . . . . . . . . . . . 169
501200. . . . . . . . . . . . . . . . . . . . . . 161
501201. . . . . . . . . . . . . . . . . . . . . . 111
501202. . . . . . . . . . . . . . . . . . . . . . 111
501203. . . . . . . . . . . . . . . . . . . . . . 111
501204. . . . . . . . . . . . . . . . . . . . . . 112
501205. . . . . . . . . . . . . . . . . . . . . . 112
501206. . . . . . . . . . . . . . . . . . . . . . 113
501207. . . . . . . . . . . . . . . . . . . . . . 115
501208. . . . . . . . . . . . . . . . . . . . . . 115
501209. . . . . . . . . . . . . . . . . . . . . . 115
501211. . . . . . . . . . . . . . . . . . . . . . 125
501212. . . . . . . . . . . . . . . . . . . . . . 122
501214. . . . . . . . . . . . . . . . . . . . . . 171
Item
Page
501232. . . . . . . . . . . . . . . . . . . . . .
501233. . . . . . . . . . . . . . . . . . . . . .
501235. . . . . . . . . . . . . . . . . . . . . .
501237. . . . . . . . . . . . . . . . . . . . . .
501238. . . . . . . . . . . . . . . . . . . . . .
501249. . . . . . . . . . . . . . . . . . . . . .
501250. . . . . . . . . . . . . . . . . . . . . .
501251. . . . . . . . . . . . . . . . . . . . . .
501256. . . . . . . . . . . . . . . . . . . . . .
501269. . . . . . . . . . . . . . . . . . . . . .
501274. . . . . . . . . . . . . . . . . . . . . .
501275. . . . . . . . . . . . . . . . . . . . . .
501277. . . . . . . . . . . . . . . . . . . . . .
501278. . . . . . . . . . . . . . . . . . . . . .
501279. . . . . . . . . . . . . . . . . . . . . .
501280. . . . . . . . . . . . . . . . . . . . . .
501281. . . . . . . . . . . . . . . . . . . . . .
501282. . . . . . . . . . . . . . . . . . . . . .
501283. . . . . . . . . . . . . . . . . . . . . .
501284. . . . . . . . . . . . . . . . . . . . . .
501285. . . . . . . . . . . . . . . . . . . . . .
501286. . . . . . . . . . . . . . . . . . . . . .
501293. . . . . . . . . . . . . . . . . . . . . .
501294. . . . . . . . . . . . . . . . . . . . . .
501295. . . . . . . . . . . . . . . . . . . . . .
501296. . . . . . . . . . . . . . . . . . . . . .
501297. . . . . . . . . . . . . . . . . . . . . .
501298. . . . . . . . . . . . . . . . . . . . . .
501299. . . . . . . . . . . . . . . . . . . . . .
501300. . . . . . . . . . . . . . . . . . . . . .
501301. . . . . . . . . . . . . . . . . . . . . .
501302. . . . . . . . . . . . . . . . . . . . . .
501303. . . . . . . . . . . . . . . . . . . . . .
501304. . . . . . . . . . . . . . . . . . . . . .
501312. . . . . . . . . . . . . . . . . . . . . .
501313. . . . . . . . . . . . . . . . . . . . . .
501316. . . . . . . . . . . . . . . . . . . . . .
501317. . . . . . . . . . . . . . . . . . . . . .
501318. . . . . . . . . . . . . . . . . . . . . .
501319. . . . . . . . . . . . . . . . . . . . . .
501329. . . . . . . . . . . . . . . . . . . . . .
501331. . . . . . . . . . . . . . . . . . . . . .
501332. . . . . . . . . . . . . . . . . . . . . .
501333. . . . . . . . . . . . . . . . . . . . . .
501335. . . . . . . . . . . . . . . . . . . . . .
501336. . . . . . . . . . . . . . . . . . . . . .
501337. . . . . . . . . . . . . . . . . . . . . .
501338. . . . . . . . . . . . . . . . . . . . . .
501339. . . . . . . . . . . . . . . . . . . . . .
501341. . . . . . . . . . . . . . . . . . . . . .
501342. . . . . . . . . . . . . . . . . . . . . .
501343. . . . . . . . . . . . . . . . . . . . . .
501344. . . . . . . . . . . . . . . . . . . . . .
501345. . . . . . . . . . . . . . . . . . . . . .
501346. . . . . . . . . . . . . . . . . . . . . .
501347. . . . . . . . . . . . . . . . . . . . . .
501348. . . . . . . . . . . . . . . . . . . . . .
501349. . . . . . . . . . . . . . . . . . . . . .
501352. . . . . . . . . . . . . . . . . . . . . .
501353. . . . . . . . . . . . . . . . . . . . . .
501367. . . . . . . . . . . . . . . . . . . . . .
501369. . . . . . . . . . . . . . . . . . . . . .
501370. . . . . . . . . . . . . . . . . . . . . .
501371. . . . . . . . . . . . . . . . . . . . . .
501372. . . . . . . . . . . . . . . . . . . . . .
501373. . . . . . . . . . . . . . . . . . . . . .
501375. . . . . . . . . . . . . . . . . . . . . .
501376. . . . . . . . . . . . . . . . . . . . . .
501377. . . . . . . . . . . . . . . . . . . . . .
501378. . . . . . . . . . . . . . . . . . . . . .
501379. . . . . . . . . . . . . . . . . . . . . .
501381. . . . . . . . . . . . . . . . . . . . . .
501601. . . . . . . . . . . . . . . . . . . . . .
126
126
128
128
128
155
155
155
140
159
172
172
172
172
172
172
172
172
172
172
172
172
170
170
170
170
170
170
170
170
160
112
123
154
146
160
160
160
160
175
153
167
157
157
155
168
156
156
156
174
174
174
174
174
174
174
174
174
225
225
225
225
225
225
225
225
225
225
225
225
225
225
181
Item
Page
501608. . . . . . . . . . . . . . . . . . . . . . . 38
501610. . . . . . . . . . . . . . . . . . . . . . 181
501622. . . . . . . . . . . . . 205, 206, 208
501623. . . . . . . . . . . . . . . . . 206, 208
501624. . . . . . . . . . . . . . . . . . . . . . 206
501635. . . . . . . . . . . . . . . . . . . . . . 181
501636. . . . . . . . . . . . . . . . . . . . . . 221
501637. . . . . . . . . . . . . . . . . . . . . . 221
501638. . . . . . . . . . . . . . . . . . . . . . 221
501639. . . . . . . . . . . . . . . . . . . . . . 221
501640. . . . . . . . . . . . . . . . . . . . . . 221
501641. . . . . . . . . . . . . . . . . . . . . . . 69
501642. . . . . . . . . . . . . . . . . . . . . . . 69
501643. . . . . . . . . . . . . . . . . . . . . . . 69
501644. . . . . . . . . . . . . . . . . . . 69, 71
501651. . . . . . . . . . . . . . . . . . . . . . 218
501652. . . . . . . . . . . . . . . . . . . . . . 218
501653. . . . . . . . . . . . . . . . . . . . . . 218
501656. . . . . . . . . . . . . . . . . . . . . . . 69
501657. . . . . . . . . . . . . . . . . . . . . . . 69
501658. . . . . . . . . . . . . . . . . . . . . . . 69
501669. . . . . . . . . . . . . . . . . . . . . . 221
501670. . . . . . . . . . . . . . . . . . . . . . 187
501719. . . . . . . . . . . . . . . . . . . . . . 153
501728. . . . . . . . . . . . . . . . . . . . . . 173
501729. . . . . . . . . . . . . . . . . 154, 173
501731. . . . . . . . . . . . . . . . . . . . . . 156
501735. . . . . . . . . . . . . . . . . . . . . . 154
501736. . . . . . . . . . . . . . . . . . . . . . 154
501760. . . . . . . . . . . . . . . . . . . . . . 154
501761. . . . . . . . . . . . . . . . . . . . . . 154
501762. . . . . . . . . . . . . . . . . . . . . . 154
501763. . . . . . . . . . . . . . . . . . . . . . 154
501764. . . . . . . . . . . . . . . . . . . . . . 109
501767. . . . . . . . . . . . . . . . . . . . . . 135
501768. . . . . . . . . . . . . . . . . . . . . . 135
501771. . . . . . . . . . . . . . . . . . . . . . 166
501777. . . . . . . . . . . . . . . . . . . . . . 126
501778. . . . . . . . . . . . . . . . . . . . . . 126
501790. . . . . . . . . . . . . . . . . . . . . . 126
501791. . . . . . . . . . . . . . . . . . . . . . 147
501792. . . . . . . . . . . . . . . . . . . . . . 147
501793. . . . . . . . . . . . . . . . . . . . . . 147
501794. . . . . . . . . . . . . . . . . . . . . . 147
501795. . . . . . . . . . . . . . . . . . . . . . 147
501796. . . . . . . . . . . . . . . . . . . . . . 147
501797. . . . . . . . . . . . . . . . . . . . . . 147
501798. . . . . . . . . . . . . . . . . . . . . . 147
501799. . . . . . . . . . . . . . . . . . . . . . 147
501800. . . . . . . . . . . . . . . . . . . . . . 147
501801. . . . . . . . . . . . . . . . . . . . . . 147
501802. . . . . . . . . . . . . . . . . . . . . . 147
501803. . . . . . . . . . . . . . . . . . . . . . 147
501804. . . . . . . . . . . . . . . . . . . . . . 147
501805. . . . . . . . . . . . . . . . . . . . . . 147
501806. . . . . . . . . . . . . . . . . . . . . . 147
501807. . . . . . . . . . . . . . . . . . . . . . 147
501808. . . . . . . . . . . . . . . . . . . . . . 147
501809. . . . . . . . . . . . . . . . . . . . . . 147
501810. . . . . . . . . . . . . . . . . . . . . . 147
501811. . . . . . . . . . . . . . . . . . . . . . 154
501812. . . . . . . . . . . . . . . . . . . . . . 154
501816. . . . . . . . . . . . . . . . . . . . . . 166
501817. . . . . . . . . . . . . . . . . . . . . . 166
501818. . . . . . . . . . . . . . . . . . . . . . 166
501830. . . . . . . . . . . . . . . . . . . . . . 148
501839. . . . . . . . . . . . . . . . . . . . . . 126
501842. . . . . . . . . . . . . . . . . . . . . . 172
501844. . . . . . . . . . . . . . . . . . . . . . 152
501846. . . . . . . . . . . . . . . . . . . . . . 152
501851. . . . . . . . . . . . . . . . . . . . . . 172
501852. . . . . . . . . . . . . . . . . . . . . . 172
501853. . . . . . . . . . . . . . . . . . . . . . 172
Item
Page
501854. . . . . . . . . . . . . . . . . . . . . .
501855. . . . . . . . . . . . . . . . . . . . . .
501856. . . . . . . . . . . . . . . . . . . . . .
501857. . . . . . . . . . . . . . . . . . . . . .
501858. . . . . . . . . . . . . . . . . . . . . .
501859. . . . . . . . . . . . . . . . . . . . . .
501862. . . . . . . . . . . . . . . . . . . . . .
501863. . . . . . . . . . . . . . . . . . . . . .
501864. . . . . . . . . . . . . . . . . . . . . .
501866. . . . . . . . . . . . . . . . . . . . . .
501867. . . . . . . . . . . . . . . . . . . . . .
501868. . . . . . . . . . . . . . . . . . . . . .
501869. . . . . . . . . . . . . . . . . . . . . .
501870. . . . . . . . . . . . . . . . . . . . . .
501871. . . . . . . . . . . . . . . . . . . . . .
501872. . . . . . . . . . . . . . . . . . . . . .
501873. . . . . . . . . . . . . . . . . . . . . .
501874 . . . . . . . . . . . . . . . . . . . . . .
501875. . . . . . . . . . . . . . . . . . . . . .
501889. . . . . . . . . . . . . . . . . . . . . .
501890. . . . . . . . . . . . . . . . . . . . . .
501891. . . . . . . . . . . . . . . . . . . . . .
501892. . . . . . . . . . . . . . . . . . . . . .
501893. . . . . . . . . . . . . . . . . . . . . .
501895. . . . . . . . . . . . . . . . . . . . . .
501897. . . . . . . . . . . . . . . . . . . . . .
501898. . . . . . . . . . . . . . . . . . . . . .
501899. . . . . . . . . . . . . . . . . . . . . .
501900. . . . . . . . . . . . . . . . . . . . . .
501902. . . . . . . . . . . . . . . . . . . . . .
501903. . . . . . . . . . . . . . . . . . . . . .
501904. . . . . . . . . . . . . . . . . . . . . .
501906. . . . . . . . . . . . . . . . . . . . . .
501907. . . . . . . . . . . . . . . . . . . . . .
501908. . . . . . . . . . . . . . . . . . . . . .
501909. . . . . . . . . . . . . . . . . . . . . .
501910. . . . . . . . . . . . . . . . . . . . . .
501911. . . . . . . . . . . . . . . . . . . . . .
501912. . . . . . . . . . . . . . . . . . . . . .
501913. . . . . . . . . . . . . . . . . . . . . .
501914. . . . . . . . . . . . . . . . . . . . . .
501915. . . . . . . . . . . . . . . . . . . . . .
501916. . . . . . . . . . . . . . . . . . . . . .
501923. . . . . . . . . . . . . . . . . . . . . .
501924. . . . . . . . . . . . . . . . . . . . . .
501925. . . . . . . . . . . . . . . . . . . . . .
501930. . . . . . . . . . . . . . . . . . . . . .
501934. . . . . . . . . . . . . . . . . . . . . .
501935. . . . . . . . . . . . . . . . . . . . . .
501936. . . . . . . . . . . . . . . . . . . . . .
501938. . . . . . . . . . . . . . . . . . . . . .
501939. . . . . . . . . . . . . . . . . . . . . .
501940. . . . . . . . . . . . . . . . . . . . . .
501941. . . . . . . . . . . . . . . . . . . . . .
501942. . . . . . . . . . . . . . . . . . . . . .
501943. . . . . . . . . . . . . . . . . . . . . .
501944. . . . . . . . . . . . . . . . . . . . . .
501945. . . . . . . . . . . . . . . . . . . . . .
501946. . . . . . . . . . . . . . . . . . . . . .
501947. . . . . . . . . . . . . . . . . . . . . .
501948. . . . . . . . . . . . . . . . . . . . . .
501949. . . . . . . . . . . . . . . . . . . . . .
501950. . . . . . . . . . . . . . . . . . . . . .
501951. . . . . . . . . . . . . . . . . . . . . .
501952. . . . . . . . . . . . . . . . . . . . . .
501953. . . . . . . . . . . . . . . . . . . . . .
501954. . . . . . . . . . . . . . . . . . . . . .
501955. . . . . . . . . . . . . . . . . . . . . .
501956. . . . . . . . . . . . . . . . . . . . . .
501957. . . . . . . . . . . . . . . . . . . . . .
501958. . . . . . . . . . . . . . . . . . . . . .
501959. . . . . . . . . . . . . . . . . . . . . .
501960. . . . . . . . . . . . . . . . . . . . . .
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
264
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
172
172
172
172
172
153
172
172
172
157
157
157
157
157
157
157
157
157
157
165
165
165
168
157
164
151
151
151
176
150
150
150
166
166
166
166
166
166
166
174
174
174
174
144
128
128
126
173
147
147
147
147
147
147
147
147
147
147
147
147
147
147
147
147
147
147
147
147
147
147
147
147
147
Item
Page
Page
502225. . . . . . . . . . . . . . . . . . . . . . . 53
502226. . . . . . . . . . . . . . . . . . . . . . . 52
502227. . . . . . . . . . . . . . . . . . . . . . . 51
502228. . . . . . . . . . . . . . . . . . . . . . . 51
502229. . . . . . . . . . . . . . . . . . . . . . . 51
502230. . . . . . . . . . . . . . . . . . . . . . . 51
502231. . . . . . . . . . . . . . . . . . . . . . . 51
502232. . . . . . . . . . . . . . . . . . . . . . . 51
502233. . . . . . . . . . . . . . . . . . . . . . . 51
502234. . . . . . . . . . . . . . . . . . . . . . . 51
502235. . . . . . . . . . . . . . . . . . . . . . . 53
502236. . . . . . . . . . . . . . . . . . . . . . . 53
502237. . . . . . . . . . . . . . . . . . . . . . . 53
502238. . . . . . . . . . . . . . . . . . . . . . . 52
502241. . . . . . . . . . . . . . . . . . . . . . . 52
502242. . . . . . . . . . . . . . . . . . . . . . . 53
502243. . . . . . . . . . . . . . . . . . . . . . . 53
502244. . . . . . . . . . . . . . . . . . . . . . . 53
502245. . . . . . . . . . . . . . . . . . . . . . . 53
502600. . . . . . . . . . . . . . . . . . . . . . . 48
502603. . . . . . . . . . . . . . . . . . . . . . . 48
502650. . . . . . . . . . . . . . . . . . . . . . . 48
502653. . . . . . . . . . . . . . . . . . . . . . . 48
502859. . . . . . . . . . . . . . . . . . . . . . 258
502900. . . . . . . . . . . . . . . . . . . . . . . 49
502903. . . . . . . . . . . . . . . . . . . . . . . 49
502950. . . . . . . . . . . . . . . . . . . . . . . 49
502953. . . . . . . . . . . . . . . . . . . . . . . 49
503022. . . . . . . . . . . . . . . . . . . . . . 245
503023. . . . . . . . . . . . . . . . . . . . . . 245
503036. . . . . . . . . . . . . . . . . . . . . . 181
503041. . . . . . . . . . . . . . . . . . . . . . 189
503042. . . . . . . . . . . . . . . . . . . . . . 189
503049. . . . . . . . . . . . . . . . . . . . . . 245
503050. . . . . . . . . . . . . . . . . . . . . . 245
503051. . . . . . . . . . . . . . . . . . . . . . 225
503066. . . . . . . . . . . . . . . . . . . . . . 258
503067. . . . . . . . . . . . . . . . . . . . . . . 37
503070. . . . . . . . . . . . . . . . . . . . . . 188
503071. . . . . . . . . . . . . . . . . . . . . . 188
503072. . . . . . . . . . . . . . . . . . . . . . 188
503073. . . . . . . . . . . . . . . . . . . . . . 188
503075. . . . . . . . . . . . . . . . . . . . . . 188
503076. . . . . . . . . . . . . . . . . . . . . . 188
503077. . . . . . . . . . . . . . . . . . . . . . 188
503083. . . . . . . . . . . . . . . . . . . . . . 188
503084. . . . . . . . . . . . . . . . . . . . . . 188
503085. . . . . . . . . . . . . . . . . . . . . . 188
503086. . . . . . . . . . . . . . . . . . . . . . 189
503097. . . . . . . . . . . . . . . . . . . . . . 231
503098. . . . . . . . . . . . . . . . . . . . . . 231
503099. . . . . . . . . . . . . . . . . . . . . . 231
503120. . . . . . . . . . . . . . . . . 245, 246
503121. . . . . . . . . . . . . . . . . . . . . . 246
503122. . . . . . . . . . . . . . . . . . . . . . 246
503200. . . . . . . . . . . . . . . . . . . . . . 149
503202. . . . . . . . . . . . . . . . . . . . . . 117
503203. . . . . . . . . . . . . . . . . . . . . . 117
503209. . . . . . . . . . . . . . . . . . . . . . 152
503210. . . . . . . . . . . . . . . . . . . . . . 151
503211. . . . . . . . . . . . . . . . . . . . . . 161
503212. . . . . . . . . . . . . . . . . . . . . . 121
503213. . . . . . . . . . . . . . . . . . . . . . 121
503214. . . . . . . . . . . . . . . . . . . . . . 127
503215. . . . . . . . . . . . . . . . . . . . . . 127
503216. . . . . . . . . . . . . . . . . . . . . . 127
503217. . . . . . . . . . . . . . . . . . . . . . 127
503231. . . . . . . . . . . . . . . . . . . . . . 176
503232. . . . . . . . . . . . . . . . . . . . . . 113
503233. . . . . . . . . . . . . . . . . . . . . . 113
503234. . . . . . . . . . . . . . . . . . . . . . 113
503235. . . . . . . . . . . . . . . . . 109, 113
503236. . . . . . . . . . . . . . . . . . . . . . 150
Item
Page
503237. . . . . . . . . . . . . . . . . . . . . .
503238. . . . . . . . . . . . . . . . . . . . . .
503239. . . . . . . . . . . . . . . . . . . . . .
503240. . . . . . . . . . . . . . . . . . . . . .
503241. . . . . . . . . . . . . . . . . . . . . .
503242. . . . . . . . . . . . . . . . . . . . . .
503243. . . . . . . . . . . . . . . . . . . . . .
503244. . . . . . . . . . . . . . . . . . . . . .
503245. . . . . . . . . . . . . . . . . . . . . .
503246. . . . . . . . . . . . . . . . . . . . . .
503247. . . . . . . . . . . . . . . . . . . . . .
503248. . . . . . . . . . . . . . . . . . . . . .
503249. . . . . . . . . . . . . . . . . . . . . .
503250. . . . . . . . . . . . . . . . . . . . . .
503251. . . . . . . . . . . . . . . . . . . . . .
503253. . . . . . . . . . . . . . . . . . . . . .
503254. . . . . . . . . . . . . . . . . . . . . .
503255. . . . . . . . . . . . . . . . . . . . . .
503256. . . . . . . . . . . . . . . . . . . . . .
503257. . . . . . . . . . . . . . . . . . . . . .
503258. . . . . . . . . . . . . . . . . . . . . .
503259. . . . . . . . . . . . . . . . . . . . . .
503260. . . . . . . . . . . . . . . . . . . . . .
503261. . . . . . . . . . . . . . . . . . . . . .
503262. . . . . . . . . . . . . . . . . . . . . .
503263. . . . . . . . . . . . . . . . . . . . . .
503264. . . . . . . . . . . . . . . . . . . . . .
503265. . . . . . . . . . . . . . . . . . . . . .
503266. . . . . . . . . . . . . . . . . . . . . .
503267. . . . . . . . . . . . . . . . . . . . . .
503268. . . . . . . . . . . . . . . . . . . . . .
503269. . . . . . . . . . . . . . . . . . . . . .
503270. . . . . . . . . . . . . . . . . . . . . .
503271. . . . . . . . . . . . . . . . . . . . . .
503272. . . . . . . . . . . . . . . . . . . . . .
503273. . . . . . . . . . . . . . . . . . . . . .
503274. . . . . . . . . . . . . . . . . . . . . .
503275. . . . . . . . . . . . . . . . . . . . . .
503276. . . . . . . . . . . . . . . . . . . . . .
503277. . . . . . . . . . . . . . . . . . . . . .
503278. . . . . . . . . . . . . . . . . . . . . .
503279. . . . . . . . . . . . . . . . . . . . . .
503280. . . . . . . . . . . . . . . . . . . . . .
503281. . . . . . . . . . . . . . . . . . . . . .
503282. . . . . . . . . . . . . . . . . . . . . .
503283. . . . . . . . . . . . . . . . . . . . . .
503290. . . . . . . . . . . . . . . . . . . . . .
503291. . . . . . . . . . . . . . . . . . . . . .
503292. . . . . . . . . . . . . . . . . . . . . .
503294. . . . . . . . . . . . . . . . . . . . . .
503295. . . . . . . . . . . . . . . . . . . . . .
503305. . . . . . . . . . . . . . . . . . . . . .
503306. . . . . . . . . . . . . . . . . . . . . .
503308. . . . . . . . . . . . . . . . . . . . . .
503309. . . . . . . . . . . . . . . . . . . . . .
503310. . . . . . . . . . . . . . . . . . . . . .
503311. . . . . . . . . . . . . . . . . . . . . .
503312. . . . . . . . . . . . . . . . . . . . . .
503313. . . . . . . . . . . . . . . . . . . . . .
503322. . . . . . . . . . . . . . . . . . . . . .
503336. . . . . . . . . . . . . . . . . . . . . .
503338. . . . . . . . . . . . . . . . . . . . . .
503354. . . . . . . . . . . . . . . . . . . . . .
503355. . . . . . . . . . . . . . . . . . . . . .
503361. . . . . . . . . . . . . . . . . . . . . .
503362. . . . . . . . . . . . . . . . . . . . . .
503363. . . . . . . . . . . . . . . . . . . . . .
503364. . . . . . . . . . . . . . . . . . . . . .
503365. . . . . . . . . . . . . . . . . . . . . .
503366. . . . . . . . . . . . . . . . . . . . . .
503367. . . . . . . . . . . . . . . . . . . . . .
503368. . . . . . . . . . . . . . . . . . . . . .
503369. . . . . . . . . . . . . . . . . . . . . .
150
150
150
134
134
133
133
133
133
133
133
133
133
133
133
157
157
157
132
143
143
135
135
135
135
135
135
136
136
136
136
136
136
136
136
136
136
136
136
137
137
137
137
137
137
119
113
113
157
175
158
128
128
131
132
132
118
118
118
160
161
161
143
143
120
123
151
127
127
111
111
111
113
Item
Page
503370. . . . . . . . . . . . . . . . . . . . . . 120
503371. . . . . . . . . . . . . . . . . . . . . . 127
503372. . . . . . . . . . . . . . . . . . . . . . 127
503373. . . . . . . . . . . . . . . . . . . . . . 113
503374. . . . . . . . . . . . . . . . . . . . . . 113
503375. . . . . . . . . . . . . . . . . . . . . . 113
503376. . . . . . . . . . . . . . . . . . . . . . 143
503377. . . . . . . . . . . . . . . . . . . . . . 143
503380. . . . . . . . . . . . . . . . . . . . . . 120
503381. . . . . . . . . . . . . . . . . . . . . . 120
503382. . . . . . . . . . . . . . . . . . . . . . 136
503383. . . . . . . . . . . . . . . . . . . . . . 136
503384. . . . . . . . . . . . . . . . . . . . . . 137
503385. . . . . . . . . . . . . . . . . . . . . . 137
503389. . . . . . . . . . . . . . . . . . . . . . 119
503411. . . . . . . . . . . . . . . . . . . . . . 122
503505. . . . . . . . . . . . . . . . . . . . . . 233
503506. . . . . . . . . . . . . . . . . . . . . . 233
503507. . . . . . . . . . . . . . . . . . . . . . 233
503509. . . . . . . . . . . . . . . . . . . . . . 233
503510. . . . . . . . . . . . . . . . . 226, 227
503511. . . . . . . . . . . . . . . . . 226, 227
503512. . . . . . . . . . . . . . . . . 226, 227
503513. . . . . . . . . . . . . . . . . . 227, 237
503514. . . . . . . . . . . . . . . . . . 227, 237
503524. . . . . . . . . . . . . . . . . . . . . . . 46
503529. . . . . . . . . . . . . . . . . . . . . . 190
503530. . . . . . . . . . . . . . . . . . . . . . 190
503531. . . . . . . . . . . . . . . . . . . . . . 190
503532. . . . . . . . . . . . . . . . . . . . . . 190
503537. . . . . . . . . . . . . . . . . . . . . . 190
503566. . . . . . . . . . . . . . . . . . . . . . . 98
503567. . . . . . . . . . . . . . . . . . . . . . . 53
503568. . . . . . . . . . . . . . . . . . . . . . 218
503569. . . . . . . . . . . . . . . . . . . . . . 218
503570. . . . . . . . . . . . . . . . . . . . . . 218
503571. . . . . . . . . . . . . . . . . . . . . . 218
503598. . . . . . . . . . . . . . . . . . 53, 172
503599. . . . . . . . . . . . . . . . . . 53, 172
503601. . . . . . . . . . . . . . . . . . . . . . . 35
503602. . . . . . . . . . . . . . . . . . . . . . . 35
503603. . . . . . . . . . . . . . . . . . . . . . . 35
503604. . . . . . . . . . . . . . . . . . . . . . . 35
503605. . . . . . . . . . . . . . . . . . . . . . . 35
503608. . . . . . . . . . . . . . . . . . . . . . . 35
503610. . . . . . . . . . . . . . . . . . . . . . . 35
503613. . . . . . . . . . . . . . . . . . . . . . 262
503615. . . . . . . . . . . . . . . . . . . . . . 167
503616. . . . . . . . . . . . . . . . . . . . . . 167
503617. . . . . . . . . . . . . . . . . . . . . . 167
503618. . . . . . . . . . . . . . . . . . . . . . 167
503619. . . . . . . . . . . . . . . . . . . . . . 167
503620. . . . . . . . . . . . . . . . . . . . . . 167
503621. . . . . . . . . . . . . . . . . . . . . . 167
503622. . . . . . . . . . . . . . . . . . . . . . 167
503623. . . . . . . . . . . . . . . . . . . . . . 167
503624. . . . . . . . . . . . . . . . . . . . . . 167
503625. . . . . . . . . . . . . . . . . . . . . . 132
503626. . . . . . . . . . . . . . . . . . . . . . 132
503627. . . . . . . . . . . . . . . . . . . . . . 132
503628. . . . . . . . . . . . . . . . . . . . . . 132
600009. . . . . . . . . . . . . . . . . . . . . . 179
600011. . . . . . . . . . . . . . . . . . . . . . . 58
600012. . . . . . . . . . . . . . . . . . . . . . . 58
800100. . . . . . . . . . . . . . . . . . . . . . . 62
800283. . . . . . . . . . . . . . . . . . . . . . 182
µTip. . . . . . . . . . . . . . . . . . . . . . . . . 196
1300M. . . . . . . . . . . . . . . . . . . . . . . 238
13156-100 . . . . . . . . . . . . . . . . . . . 185
13157-100 . . . . . . . . . . . . . . . . . . . 185
13158-100 . . . . . . . . . . . . . . . . . . . 185
13159-100 . . . . . . . . . . . . . . . . . . . 185
13160-100 . . . . . . . . . . . . . . . . . . . 185
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
265
PRODUCT INDEX
501961. . . . . . . . . . . . . . . . . . . . . . 147
501962. . . . . . . . . . . . . . . . . . . . . . 147
501963. . . . . . . . . . . . . . . . . . . . . . 147
501964. . . . . . . . . . . . . . . . . . . . . . 147
501965. . . . . . . . . . . . . . . . . . . . . . 147
501966. . . . . . . . . . . . . . . . . . . . . . 147
501967. . . . . . . . . . . . . . . . . . . . . . 152
501968. . . . . . . . . . . . . . . . . . . . . . 152
501969. . . . . . . . . . . . . . . . . . . . . . 152
501983. . . . . . . . . . . . . . . . . . . . . . 120
501984. . . . . . . . . . . . . . . . . . . . . . 120
501985. . . . . . . . . . . . . . . . . . . . . . 110
501986. . . . . . . . . . . . . . . . . 168, 180
501987. . . . . . . . . . . . . . . . . . . . . . 120
501988. . . . . . . . . . . . . . . . . . . . . . 119
501989. . . . . . . . . . . . . . . . . . . . . . 146
501990. . . . . . . . . . . . . . . . . . . . . . 158
501993. . . . . . . . . . . . . . . . . . . . . . 151
501994. . . . . . . . . . . . . . . . . . . . . . 151
501996. . . . . . . . . . . . . . . . . . . . . . 120
501998. . . . . . . . . . . . . . . . . . . . . . 146
502000. . . . . . . . . . . . . . . . . . . . . . 223
502001. . . . . . . . . . . . . . . . . . . . . . 223
502004. . . . . . . . . . . . . . . . . 223, 225
502005. . . . . . . . . . . . . . . . . 223, 225
502006. . . . . . . . . . . . . . . . . . . . . . 223
502007. . . . . . . . . . . . . . . . . 223, 225
502009. . . . . . . . . . . . . . . . . 223, 225
502010. . . . . . . . . . . . . . . . . . . . . . 223
502011. . . . . . . . . . . . . . . . . . . . . . 223
502012. . . . . . . . . . . . . . . . . . . . . . 223
502013. . . . . . . . . . . . . . . . . . . . . . 223
502015. . . . . . . . . . . . . . . . . 223, 228
502016. . . . . . . . . . . . . . . . . . . . . . 223
502017. . . . . . . . . . . . . . . . . . . . . . 223
502018. . . . . . . . . . . . . . . . . . . . . . 223
502019. . . . . . . . . . . . . . . . . . . . . . 223
502040. . . . . . . . . . . . . . . . . . . . . . 233
502041. . . . . . . . . . . . . . . . . . . . . . 233
502053. . . . . . . . . . . . . . . . . . . . . . . 53
502054. . . . . . . . . . . . . . . . . . . . . . . 53
502055. . . . . . . . . . . . . . . . . . . . . . . 53
502056. . . . . . . . . . . . . . . . . . . . . . . 53
502060. . . . . . . . . . . . . . . . . . . . . . . 52
502062. . . . . . . . . . . . . . . . . . . . . . . 52
502063. . . . . . . . . . . . . . . . . . . . . . . 52
502067. . . . . . . . . . . . . . . . . . . . . . . 53
502068. . . . . . . . . . . . . . . . . . . . . . . 53
502070. . . . . . . . . . . . . . . . . . . . . . . 53
502102. . . . . . . . . . . . . . . . . . . . . . 206
502105. . . . . . . . . . . . . . . . . . . . . . 212
502109. . . . . . . . . . . . . . . . . . . . . . 101
502110. . . . . . . . . . . . . . . . . . . . . . 101
502119. . . . . . . . . . . . . . . . . . . . . . . 71
502120. . . . . . . . . . . . . . . . . . . . . . . 71
502122. . . . . . . . . . . . . . . . . . . . . . . 71
502124. . . . . . . . . . . . . . . . . . . . . . . 71
502125. . . . . . . . . . . . . . . . . . . . . . 101
502157. . . . . . . . . . . . . . . . . . . . . . 181
502160. . . . . . . . . . . . . . . . . . . . . . 222
502163. . . . . . . . . . . . . . . . . 223, 225
502167. . . . . . . . . . . . . . . . . . . . . . 223
502168. . . . . . . . . . . . . . . . . . . . . . 223
502190. . . . . . . . . . . . . . . . . . . . . . 188
502191. . . . . . . . . . . . . . . . . . . . . . 188
502195. . . . . . . . . . . . . . . . . . . . . . . 46
502196. . . . . . . . . . . . . . . . . . . . . . . 46
502197. . . . . . . . . . . . . . . . . . . . . . . 46
502201. . . . . . . . . . . . . . . . . . . . . . 253
502204. . . . . . . . . . . . . . . . . . . . . . . 52
502210. . . . . . . . . . . . . . . . . . . . . . . 53
502213. . . . . . . . . . . . . . . . . . . . 52, 53
502224. . . . . . . . . . . . . . . . . . . . . . . 53
Item
PRODUCT INDEX
Item
Page
13161-100 . . . . . . . . . . . . . . . . . . .
13162-100 . . . . . . . . . . . . . . . . . . .
13163-100 . . . . . . . . . . . . . . . . . . .
1350M. . . . . . . . . . . . . . . . . . . . . . .
13822-10 . . . . . . . . . . . . . . . . . . . .
14003 & 14003-G. . . . . . . . . . . . . .
14034-40 . . . . . . . . . . . . . . . . . . . .
14035-10 . . . . . . . . . . . . . . . . . . . .
14036-15 . . . . . . . . . . . . . . . . . . . .
14038-10 . . . . . . . . . . . . . . . . . . . .
14039-10 . . . . . . . . . . . . . . . . . . . .
14040-50 . . . . . . . . . . . . . . . . . . . .
14041-60 . . . . . . . . . . . . . . . . . . . .
14042-100 . . . . . . . . . . . . . . . . . . .
14043-20 . . . . . . . . . . . . . . . . . . . .
14044-5 . . . . . . . . . . . . . . . . . . . . .
14045-20 . . . . . . . . . . . . . . . . . . . .
14047-10 . . . . . . . . . . . . . . . . . . . .
14048-20 . . . . . . . . . . . . . . . . . . . .
14051-100 . . . . . . . . . . . . . . . . . . .
14054-10 . . . . . . . . . . . . . . . . . . . .
14055-2 . . . . . . . . . . . . . . . . . . . . .
14057-10 . . . . . . . . . . . . . . . . . . . .
14058-10 . . . . . . . . . . . . . . . . . . . .
14059-2 . . . . . . . . . . . . . . . . . . . . .
14061-60 . . . . . . . . . . . . . . . . . . . .
14073-4 . . . . . . . . . . . . . . . . . . . . .
14080 & 14080-G . . . . . . . . . . . . .
14081 & 14081-G . . . . . . . . . . . . .
14089 & 14089-G . . . . . . . . . . . . .
14090 & 14090-G . . . . . . . . . . . . .
14091 & 14091-G . . . . . . . . . . . . .
14109 & 14109-G. . . . . . . . . . . . . .
14110 & 14110-G. . . . . . . . . . . . . .
14112 & 14112-G. . . . . . . . . . . . . .
14113 & 14113-G. . . . . . . . . . . . . .
14114 & 14114-G. . . . . . . . . . . . . .
14116 & 14116-G. . . . . . . . . . . . . .
14117 & 14117-G. . . . . . . . . . . . . .
14118 & 14118-G. . . . . . . . . . . . . .
14119 & 14119-G. . . . . . . . . . . . . .
14122 & 14122-G. . . . . . . . . . . . . .
14124-G . . . . . . . . . . . . . . . . . . . . .
14125 & 14125-G. . . . . . . . . . . . . .
14127 & 14127-G. . . . . . . . . . . . . .
14128 & 14128-G. . . . . . . . . . . . . .
14129 & 14129-G. . . . . . . . . . . . . .
14130 & 14130-G. . . . . . . . . . . . . .
14131 & 14131-G. . . . . . . . . . . . . .
14133 & 14133-G. . . . . . . . . . . . . .
14134 & 14134-G. . . . . . . . . . . . . .
14136 & 14136-G. . . . . . . . . . . . . .
14137 & 14137-G. . . . . . . . . . . . . .
14140 & 14140-G. . . . . . . . . . . . . .
14141 & 14141-G. . . . . . . . . . . . . .
14142 & 14142-G. . . . . . . . . . . . . .
14177 & 14177-G. . . . . . . . . . . . . .
14192 & 14192-G. . . . . . . . . . . . . .
14214 & 14214-G. . . . . . . . . . . . . .
14215 & 14215-G. . . . . . . . . . . . . .
14216 & 14216-G. . . . . . . . . . . . . .
14217 & 14217-G. . . . . . . . . . . . . .
14218 & 14218-G. . . . . . . . . . . . . .
14219 & 14219-G. . . . . . . . . . . . . .
14220 & 14220-G. . . . . . . . . . . . . .
14221 & 14221-G. . . . . . . . . . . . . .
14224 & 14224-G. . . . . . . . . . . . . .
14225 & 14225-G. . . . . . . . . . . . . .
14226 & 14226-G. . . . . . . . . . . . . .
14240 & 14240-G. . . . . . . . . . . . . .
14292 & 14292-G. . . . . . . . . . . . . .
14393 & 14393-G. . . . . . . . . . . . . .
14394 & 14394-G. . . . . . . . . . . . . .
185
185
185
238
185
126
185
185
185
185
185
185
185
185
185
185
185
185
185
185
185
185
185
185
185
185
189
144
143
158
158
158
144
144
131
121
121
150
150
150
150
126
127
128
128
141
152
151
152
143
156
161
143
115
115
118
126
138
136
136
137
137
135
135
136
136
135
135
118
152
157
134
134
Item
Page
14395 & 14395-G. . . . . . . . . . . . . . 135
14396 & 14396-G . . . . . . . . . . . . . 135
15905 & 15905-G . . . . . . . . . . . . . 128
15906 & 15906-G . . . . . . . . . . . . . 128
15914 & 15914-G. . . . . . . . . . . . . . 118
15915 & 15915-G. . . . . . . . . . . . . . 118
15916 & 15916-G. . . . . . . . . . . . . . 117
15917 & 15917-G. . . . . . . . . . . . . . 118
15918 & 15918-G. . . . . . . . . . . . . . 119
15920 & 15920-G. . . . . . . . . . . . . . 123
15921 & 15921-G. . . . . . . . . . . . . . 123
15922 & 15922-G. . . . . . . . . . . . . . 134
15923 & 15923-G. . . . . . . . . . . . . . 134
15924 & 15924-G. . . . . . . . . . . . . . 138
15926 & 15926-G. . . . . . . . . . . . . . 144
1B100-3. . . . . . . . . . . . . . . . . . . . . . 192
1B100-4. . . . . . . . . . . . . . . . . . . . . . 192
1B100-6. . . . . . . . . . . . . . . . . . . . . . 192
1B100F-3. . . . . . . . . . . . . . . . . . . . . 192
1B100F-4. . . . . . . . . . . . . . . . . . . . . 192
1B100F-6. . . . . . . . . . . . . . . . . . . . . 192
1B120. . . . . . . . . . . . . . . . . . . . . . . 192
1B120-4. . . . . . . . . . . . . . . . . . . . . . 192
1B120-6. . . . . . . . . . . . . . . . . . . . . . 192
1B120F-3. . . . . . . . . . . . . . . . . . . . . 192
1B120F-4. . . . . . . . . . . . . . . . . . . . . 192
1B120F-6. . . . . . . . . . . . . . . . . . . . . 192
1B150-3 . . . . . . . . . . . . . . . . . . . . . 192
1B150-4 . . . . . . . . . . . . . . . . . . . . . 192
1B150-6 . . . . . . . . . . . . . . . . . . . . . 192
1B150F-3. . . . . . . . . . . . . . . . . . . . . 192
1B150F-4. . . . . . . . . . . . . . . . . . . . . 192
1B150F-6. . . . . . . . . . . . . . . . . . . . . 192
1B200-4. . . . . . . . . . . . . . . . . . . . . . 192
1B200F-4. . . . . . . . . . . . . . . . . . . . . 192
1B200F-6. . . . . . . . . . . . . . . . . . . . . 192
2026-10 . . . . . . . . . . . . . . . . . . . . . 187
2B150F-4. . . . . . . . . . . . . . . . . . . . . 194
2B150F-6. . . . . . . . . . . . . . . . . . . . . 194
3417-10. . . . . . . . . . . . . . . . . . . . . . 187
3579-20. . . . . . . . . . . . . . . . . . . . . . . 97
3742-20. . . . . . . . . . . . . . . . . . . . . . 185
3B120F-4. . . . . . . . . . . . . . . . . . . . . 194
3B120F-6. . . . . . . . . . . . . . . . . . . . . 194
4- or 7-Barrel Pipette Puller. . . . . . . 240
500023 & 500023-G . . . . . . . . . . . 146
500088 & 500088-G . . . . . . . . . . . 148
500092 & 500092-G . . . . . . . . . . . 117
500137 & 500137-G. . . . . . . . . . . . 159
500177 & 500177-G. . . . . . . . . . . . 117
500178 & 500178-G . . . . . . . . . . . 117
500216 & 500216-G . . . . . . . . . . . 134
500217 & 500217-G . . . . . . . . . . . 134
500218 & 500218-G . . . . . . . . . . . 137
500219 & 500219-G . . . . . . . . . . . 137
500220 & 500220-G . . . . . . . . . . . 137
500221 & 500221-G . . . . . . . . . . . 137
500222 & 500222-G . . . . . . . . . . . 118
500223 & 500223-G . . . . . . . . . . . 143
500224 & 500224-G . . . . . . . . . . . 145
500225 & 500225-G . . . . . . . . . . . 145
500226 & 500226-G . . . . . . . . . . . 145
500227 & 500227-G . . . . . . . . . . . 146
500228 & 500228-G . . . . . . . . . . . 128
500236 & 500236-G . . . . . . . . . . . 155
500237 & 500237-G. . . . . . . . . . . . 155
500238 & 500238-G . . . . . . . . . . . 155
500239-500248. . . . . . . . . . . . . . . 155
500260 & 500260-G . . . . . . . . . . . 126
500348-500356. . . . . . . . . . . . . . . 156
500362 & 500362-G . . . . . . . . . . . 159
500363 & 500363-G . . . . . . . . . . . 119
500364 & 500364-G . . . . . . . . . . . 119
Item
Page
500365 & 500365-G . . . . . . . . . . .
500366 & 500366-G . . . . . . . . . . .
500367 & 500367-G . . . . . . . . . . .
500368 & 500368-G . . . . . . . . . . .
500369 & 500369-G . . . . . . . . . . .
500372-T. . . . . . . . . . . . . . . . . . . . .
500373-T. . . . . . . . . . . . . . . . . . . . .
500378 & 500378-G. . . . . . . . . . . .
500379 & 500379-G. . . . . . . . . . . .
500380 & 500380-G . . . . . . . . . . .
500444 & 500444-G . . . . . . . . . . .
500446 & 500446-G . . . . . . . . . . .
500451 & 500451-G . . . . . . . . . . .
500452 & 500452-G . . . . . . . . . . .
500456 & 500456-G . . . . . . . . . . .
501212-T. . . . . . . . . . . . . . . . . . . . .
501215 & 501215-G . . . . . . . . . . .
501216 & 501216-G . . . . . . . . . . .
501217 & 501217-G . . . . . . . . . . .
501218 & 501218-G . . . . . . . . . . .
501219 & 501219-G . . . . . . . . . . .
501220 & 501220-G . . . . . . . . . . .
501221 & 501221-G . . . . . . . . . . .
501222-G . . . . . . . . . . . . . . . . . . . .
501223 & 501223-G . . . . . . . . . . .
501224 & 501224-G . . . . . . . . . . .
501225 & 501225-G . . . . . . . . . . .
501226 & 501226-G . . . . . . . . . . .
501227 & 501227-G . . . . . . . . . . .
501228 & 501228-G . . . . . . . . . . .
501229 & 501229-G . . . . . . . . . . .
501230 & 501230-G . . . . . . . . . . .
501231 & 501231-G . . . . . . . . . . .
501234 & 501234-G . . . . . . . . . . .
501236 & 501236-G . . . . . . . . . . .
501239 & 501239-G . . . . . . . . . . .
501240 & 501240-G . . . . . . . . . . .
501241 & 501241-G . . . . . . . . . . .
501242 & 501242-G . . . . . . . . . . .
501243 & 501243-G . . . . . . . . . . .
501244 & 501244-G . . . . . . . . . . .
501245 & 501245-G . . . . . . . . . . .
501246 & 501246-G . . . . . . . . . . .
501247 & 501247-G. . . . . . . . . . . .
501248 & 501248-G . . . . . . . . . . .
501252 & 501252-G . . . . . . . . . . .
501253 & 501253-G . . . . . . . . . . .
501254 & 501254-G . . . . . . . . . . .
501255 & 501255-G . . . . . . . . . . .
501259 & 501259-G . . . . . . . . . . .
501260 & 501260-G . . . . . . . . . . .
501261 & 501261-G . . . . . . . . . . .
501262 & 501262-G . . . . . . . . . . .
501263 & 501263-G . . . . . . . . . . .
501264 & 501264-G . . . . . . . . . . .
501265 & 501265-G . . . . . . . . . . .
501266 & 501266-G . . . . . . . . . . .
501267 & 501267-G . . . . . . . . . . .
501268 & 501268-G . . . . . . . . . . .
501273-501286. . . . . . . . . . . . . . .
501287 & 501287-G. . . . . . . . . . . .
501288 & 501288-G . . . . . . . . . . .
501291 & 501291-G . . . . . . . . . . .
501292-501300. . . . . . . . . . . . . . .
501314 & 501314-G . . . . . . . . . . .
501320 & 501320-G . . . . . . . . . . .
501321 & 501321-G . . . . . . . . . . .
501322 & 501322-G . . . . . . . . . . .
501324 & 501324-G . . . . . . . . . . .
501325 & 501325-G . . . . . . . . . . .
501326 & 501326-G . . . . . . . . . . .
501327 & 501327-G . . . . . . . . . . .
501328 & 501328-G . . . . . . . . . . .
119
140
140
151
151
141
122
138
138
139
139
125
123
123
122
122
118
119
119
138
138
138
138
138
138
138
138
138
138
138
138
138
138
127
128
120
125
124
124
125
117
117
145
155
155
136
136
136
136
140
140
137
137
135
135
119
119
120
120
172
125
124
123
170
153
123
140
139
124
125
124
153
153
Item
Page
501340-501349. . . . . . . . . . . . . . .
501700 & 501700-G . . . . . . . . . . .
501701 & 501701-G . . . . . . . . . . .
501702 & 501702-G . . . . . . . . . . .
501703 & 501703-G . . . . . . . . . . .
501704 & 501704-G . . . . . . . . . . .
501705 & 501705-G . . . . . . . . . . .
501706 & 501706-G . . . . . . . . . . .
501707 & 501707-G. . . . . . . . . . . .
501708 & 501708-G . . . . . . . . . . .
501709 & 501709-G . . . . . . . . . . .
501710 & 501710-G . . . . . . . . . . .
501711 & 501711-G . . . . . . . . . . .
501712 & 501712-G . . . . . . . . . . .
501713 & 501713-G . . . . . . . . . . .
501714 & 501714-G . . . . . . . . . . .
501715 & 501715-G . . . . . . . . . . .
501716 & 501716-G . . . . . . . . . . .
501717 & 501717-G . . . . . . . . . . .
501718 & 501718-G . . . . . . . . . . .
501720 & 501720-G . . . . . . . . . . .
501721 & 501721-G . . . . . . . . . . .
501722 & 501722-G . . . . . . . . . . .
501723 & 501723-G . . . . . . . . . . .
501724 & 501724-G . . . . . . . . . . .
501725 & 501725-G . . . . . . . . . . .
501727-G . . . . . . . . . . . . . . . . . . . .
501730 & 501730-G . . . . . . . . . . .
501733 & 501733-G . . . . . . . . . . .
501734 & 501734-G . . . . . . . . . . .
501739 & 501739-G . . . . . . . . . . .
501740 & 501740-G. . . . . . . . . . . .
501741-G . . . . . . . . . . . . . . . . . . . .
501742-G . . . . . . . . . . . . . . . . . . . .
501743 & 501743-G. . . . . . . . . . . .
501744 & 501744-G. . . . . . . . . . . .
501745 & 501745-G. . . . . . . . . . . .
501747 & 501747-G. . . . . . . . . . . .
501748 & 501748-G. . . . . . . . . . . .
501749 & 501749-G. . . . . . . . . . . .
501750 & 501750-G . . . . . . . . . . .
501751 & 501751-G . . . . . . . . . . .
501752 & 501752-G . . . . . . . . . . .
501753 & 501753-G . . . . . . . . . . .
501754 & 501754-G . . . . . . . . . . .
501755 & 501755-G . . . . . . . . . . .
501756 & 501756-G . . . . . . . . . . .
501757 & 501757-G. . . . . . . . . . . .
501758 & 501758-G . . . . . . . . . . .
501759 & 501759-G . . . . . . . . . . .
501770 & 501770-G. . . . . . . . . . . .
501772 & 501772-G. . . . . . . . . . . .
501773 & 501773-G. . . . . . . . . . . .
501775 & 501775-G. . . . . . . . . . . .
501776 & 501776-G. . . . . . . . . . . .
501779-G . . . . . . . . . . . . . . . . . . . .
501780-G . . . . . . . . . . . . . . . . . . . .
501781-G . . . . . . . . . . . . . . . . . . . .
501782-G . . . . . . . . . . . . . . . . . . . .
501783-G . . . . . . . . . . . . . . . . . . . .
501784-G . . . . . . . . . . . . . . . . . . . .
501785-G . . . . . . . . . . . . . . . . . . . .
501786-G . . . . . . . . . . . . . . . . . . . .
501787-G . . . . . . . . . . . . . . . . . . . .
501788-G . . . . . . . . . . . . . . . . . . . .
501850-501858. . . . . . . . . . . . . . .
501860-501864. . . . . . . . . . . . . . .
501888-501891. . . . . . . . . . . . . . .
501905-501912. . . . . . . . . . . . . . .
501974-6. . . . . . . . . . . . . . . . . . . . .
501975-6 . . . . . . . . . . . . . . . . . . . .
501976-6 . . . . . . . . . . . . . . . . . . . .
501977-6. . . . . . . . . . . . . . . . . . . . .
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
266
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
174
123
139
139
139
139
123
125
125
125
124
124
124
124
124
124
124
125
125
153
153
153
153
153
153
146
119
124
136
136
136
136
119
119
138
136
136
136
136
137
137
137
137
138
138
138
138
138
134
134
153
161
161
115
115
149
149
149
149
149
149
149
149
149
149
172
172
165
166
114
114
114
114
Item
Page
A
A300 Pulsemaster. . . . . . . . . . . . . . . 26
A310 Accupulser. . . . . . . . . . . . . . . . 28
A320D. . . . . . . . . . . . . . . . . . . . . . . . 30
A320R. . . . . . . . . . . . . . . . . . . . . . . . 30
A362 . . . . . . . . . . . . . . . . . . . . 30, 33
A365D. . . . . . . . . . . . . . . . . . . . . . . . 31
A365R. . . . . . . . . . . . . . . . . . . . . . . . 31
A382. . . . . . . . . . . . . . . . . . . . . . . . . 32
A385. . . . . . . . . . . . . . . . . . . . . . . . . 32
A385R. . . . . . . . . . . . . . . . . . . . . . . . 32
A385RC. . . . . . . . . . . . . . . . . . . . . . . 32
A395. . . . . . . . . . . . . . . . . . . . . . . . . 33
Page
A395D. . . . . . . . . . . . . . . . . . . . . . . . 33
A395R. . . . . . . . . . . . . . . . . . . . . . . . 33
ABM. . . . . . . . . . . . . . . . . . . . . . . . . . 11
Accupulser™ Signal Generator . . . . . . 28
action potentials. . . . . . . . . . . . . . . . . 20
Adhesives. . . . . . . . . . . . . . . . 178, 179
Adjustable Pipetters. . . . . . . . . . . . . 254
ADPT2 Footswitch . . . . . . . . . . . . . . 247
Adson Forceps . . . . . . . . . . . . . 117, 118
Aeration. . . . . . . . . . . . . . . . . . . . . . . 91
aeration manifold. . . . . . . . . . . . . . . . 91
Ag/AgCl Half-Cells . . . . . . . . . . 21, 203
Agricola Retractor. . . . . . . . . . . . . . . 152
AGTxxxx. . . . . . . . . . . . . . . . . . . . . . 183
AGWxxxx. . . . . . . . . . . . . . . . . . . . . 183
Air-Therm. . . . . . . . . . . . . . . . . . . . . 229
AL1000 . . . . . . . . . . . . . . . . . . . . . . 247
AL2000 . . . . . . . . . . . . . . . . . . . . . . 247
Aladdin Syringe Pumps . . . . . . . . . . 247
Alconox . . . . . . . . . . . . . . . . . . . . . . 176
Alligator Forceps. . . . . . . . . . . . . . . . 125
Allis Tissue Forceps . . . . . . . . . . . . . 124
allodynia . . . . . . . . . . . . . . . . . . . . . . 42
ALM Self-retaining Retractor. . . . . . . 152
Alumina Abrasive. . . . . . . . . . . . . . . 238
Amplifier Selection Guide. . . . . . . . . . . 2
amplitude discriminator. . . . . . . . . . . 20
Analgesia. . . . . . . . . . . . . . . . . . . . . . 43
Analgesia Meter. . . . . . . . . . . . . . 44, 45
Anesthesia. . . . . . . . . . . . . . . . . . . . . 40
Anesthesiometer. . . . . . . . . . . . . . . . . 42
Angled Electrode Holder. . . . . . . . . . 212
Angled Scissors . . . . . . . . . . . . . . . . 139
Animal Temperature Controller. . . . . . 46
APEH1. . . . . . . . . . . . . . . . . . . . . . . 198
APEH2. . . . . . . . . . . . . . . . . . . . . . . 198
Apollo 1000. . . . . . . . . . . . . . . . . . . . 59
Applying Forceps . . . . . . . . . . . . . . . 149
Approximator. . . . . . . . . . . . . . . . . . 149
Articulated Arm. . . . . . . . . . . . 223, 225
ATC1000 . . . . . . . . . . . . . . . . . . . . . . 46
Audible Baseline Monitor. . . . . . . . . . 11
Automated TEER Measuring Sys. . . . . 86
AUWxxxx. . . . . . . . . . . . . . . . . . . . . 183
B
B203MC4. . . . . . . . . . . . . . . . . . . . . 258
B203XV. . . . . . . . . . . . . . . . . . . . . . 258
Backhaus Towel Clamp. . . . . . . . . . . 123
Ball Bearing Boom Stand. . . . 223, 225
Ball Joint, Magnetic . . . . . . . . . . . . . 217
Ball-joint holder attachment. . . . . . . 213
BAM21. . . . . . . . . . . . . . . . . . . . . . . . 78
Barb-to-Tubing Coupler. . . . . . . . . . . 184
Barraquer Iris Scissors. . . . . . . . . . . 141
Base. . . . . . . . . . . . . . . . . . . . . . . . . 188
base plate. . . . . . . . . . . . . . . . . . . . . 218
Base, Magnetic. . . . . . . . . . . . . . . . . 216
Basic Muscle Tester. . . . . . . . . . . . . . 78
BAT-10R/LOP. . . . . . . . . . . . . . . . . . . 38
BAT-12R. . . . . . . . . . . . . . . . . . . . . . . 38
Bath Chamber. . . . . . . . . . . . . . . . . . . 98
Battery Charger. . . . . . . . . . . . . 30, 32
Battery, NiMH. . . . . . . . . . . . . . . . . . . . 9
BEECAL. . . . . . . . . . . . . . . . . . . . . . . 72
Beetrode. . . . . . . . . . . . . . . . . . . . . . . 72
BetterSkin™ Electrodes. . . . . . . . . . . 202
Beveler, Micropipette . . . . . . . . . . . . 238
Biaxial Test System. . . . . . . . . . . . . . . 88
Biemer scissors. . . . . . . . . . . . . . . . 141
Bifurcated Light Guide . . . . . . . . . . . 228
Bio-amplifier. . . . . . . . . . . . . . . . . . . . . 8
Bio-amplifier System. . . . . . . . . . . . . . 12
Item
Page
biocide. . . . . . . . . . . . . . . . . . . . . . . 176
Biopsy Punch. . . . . . . . . . . . . . . . . . 166
Biosensing. . . . . . . . . . . . . . . . . . . . . 54
BioTester 5000. . . . . . . . . . . . . . . . . . 88
Bipolar Electrodes. . . . . . . . . . . . . . . . 18
bipolar stimulation. . . . . . . . . . . . . . . 18
Bishop Harmon forceps. . . . . . . . . . . 115
blade remover . . . . . . . . . . . . . . . . . 155
BLADES . . . . . . . . . . . . . . . 98, 99, 166
Blades, single edge . . . . . . . . . . . . . . 98
Blood Pressure. . . . . . . . . . . . . . . . . . 36
Blood Pressure Monitor . . . . . . . . . . . 37
BLOOD PRESSURE TRANSDUCER. . . 37
Blumenthal Rongeur. . . . . . . . . . . . . 158
Bone Cutter. . . . . . . . . . . 157, 158, 159
Bone Wax. . . . . . . . . . . . . . . . . . . . . 166
Boom Stand. . . . . . . . . . . . . . 223, 225
Borosilicate. . . . . . . . . . . 192, 194, 196
BP1 . . . . . . . . . . . . . . . . . . . . . . . . . . 37
BPCABLE2 . . . . . . . . . . . . . . . . . . . . . 37
Brackets. . . . . . . . . . . . . . . . . . . . . . 182
Brain Matrices . . . . . . . . . . . . . 99, 166
Brain Spatula. . . . . . . . . . . . . . . . . . 161
Bridge8 . . . . . . . . . . . . . . . . . . . . . . . 13
BT-1. . . . . . . . . . . . . . . . . . . . . . . . . . 39
Buffer Solutions . . . . . . . . . . . . . . . . . 73
Bulldog Clamps . . . . . . . . . . . . . . . . 150
C
C3005. . . . . . . . . . . . . . . . . . . . . . . 183
Cables and Connectors. . . . . . . . . . . 186
CAL900A. . . . . . . . . . . . . . . . . . . . . . 22
CALBUF-1. . . . . . . . . . . . . . . . . . . . . . 73
CALBUF-2. . . . . . . . . . . . . . . . . . . . . . 73
Calcium Calibration Solutions. . . . . . . 73
Calcium Electrode. . . . . . . . . . . . . . . . 74
CaliCell™ . . . . . . . . . . . . . . . . . . . . . . 84
Caliper. . . . . . . . . . . . . . . . . . . . . . . 161
Caliper, Digital. . . . . . . . . . . . . . . . . 181
Cannula, Micro. . . . . . . . . . . . . . . . . 196
Cannulation forceps . . . . . . . . . . . . . 122
Carbon Epoxy. . . . . . . . . . . . . . . . . . 179
Carbon fiber microelectrodes. . . . . . . 67
Carbon Wire. . . . . . . . . . . . . . . . . . . 183
Cardiac Hemodynamics. . . . . . . . . . . 106
Care & Handling of Surgical Instr. . . 142
cartridge electrodes . . . . . . . . . . . . . . 14
Castro Olsen-Hegar Needle Hldr. . . . 146
Castroviejo Caliper. . . . . . . . . . . . . . 161
Castroviejo Curved Scissors . . . . . . . 129
Castroviejo Straight Scissors. . . . . . . 129
Cautery. . . . . . . . . . . . . . . . . . 169, 170
CBL100 . . . . . . . . . . . . . . . . . . . . . . 187
CBL102 . . . . . . . . . . . . . . . . . . . . . . 187
CCD Video Camera. . . . . . . . . . . . . . 231
Cell culture cups. . . . . . . . . . . . . . . . . 84
Cellular & Tissue Research. . . . . . . . . 76
Ceramic Scissors. . . . . . . . . . . . . . . . 140
Ceramic Zirconia Scissors. . . . . . . . . 140
Ceramic-tipped Forceps. . . . . . . . . . . 115
CF10. . . . . . . . . . . . . . . . . . . . . . . . . 67
CF30 . . . . . . . . . . . . . . . . . . . . . . . . . 67
CFN10-xxx. . . . . . . . . . . . . . . . . . . . . 67
CFN30-xxx. . . . . . . . . . . . . . . . . . . . . 67
Chamber, Measurement . . . . . . . . . . . 62
CHM1. . . . . . . . . . . . . . . . . . . . . . . . . 97
CHM2. . . . . . . . . . . . . . . . . . . . . . . . . 97
CHM3. . . . . . . . . . . . . . . . . . . . . . . . . 97
CHM4. . . . . . . . . . . . . . . . . . . . . . . . . 97
CHM5. . . . . . . . . . . . . . . . . . . . . . . . . 97
CHM5M12. . . . . . . . . . . . . . . . . . . . . 97
CHM6. . . . . . . . . . . . . . . . . . . . . . . . . 97
CHM7. . . . . . . . . . . . . . . . . . . . . . . . . 97
Item
Page
CHM8. . . . . . . . . . . . . . . . . . . . . . . . . 97
Cidex Plus . . . . . . . . . . . . . . . . . . . . 176
Circulating Bath . . . . . . . . . . . . . . . . . 95
Circulation Reservoirs. . . . . . . . . . . . . 97
clamp. . . . . . . . . . . . . . . . . . . . . . . . 213
Clamps. . . . . . . . . . . . . . . . . . . . . . . 188
Cleaners. . . . . . . . . . . . . . . . . . . . . . 176
Clear hose . . . . . . . . . . . . . . . . . . . . 229
Clip Applier . . . . . . . . . . . . . . . . . . . 148
clip removing forceps. . . . . . . . . . . . 148
Clips and Clamps. . . . . . . . . . . . . . . 149
CMF20GxxL. . . . . . . . . . . . . . . . . . . 197
CMF22GxxL. . . . . . . . . . . . . . . . . . . 197
CMF23GxxL. . . . . . . . . . . . . . . . . . . 197
CMF26GxxL. . . . . . . . . . . . . . . . . . . 197
CMF28GxxL. . . . . . . . . . . . . . . . . . . 197
CMF31GxxL. . . . . . . . . . . . . . . . . . . 197
CMF34GxxL. . . . . . . . . . . . . . . . . . . 197
CMF35GxxL. . . . . . . . . . . . . . . . . . . 197
CMF90UxxL. . . . . . . . . . . . . . . . . . . 197
C-Mount. . . . . . . . . . . . . . . . . . . . . . 225
C-Mount Eyepiece Adapters. . . . . . . 231
CO2 Analyzer. . . . . . . . . . . . . . . . . . . 47
coaxial cables, micro. . . . . . . . . . . . . 183
COLCAM. . . . . . . . . . . . . . . . . . . . . . 231
Color Video Camera . . . . . . . . . . . . . 231
Combination pH electrode. . . . . . . . . . 72
Compact Magnetic Stand . . . . . . . . . 218
Concentric Bipolar Electrodes . . . . . . . 18
Conductive Electrode Gel . . . . . . . . . 202
Copper Alloy Wire. . . . . . . . . . . . . . 183
Corneoscleral Punch. . . . . . . . . . . . . 158
Cover Slips. . . . . . . . . . . . . . . . . . . . 233
CPVCxxxxx. . . . . . . . . . . . . . . . . . . . 183
Crile Hemostatic Forceps. . . . . . . . . . 124
Crile-Wood Needle Holder. . . . . . . . . 145
Crocodile Forceps. . . . . . . . . . . . . . . 125
CS-BIOTESTER5000. . . . . . . . . . . . . . 88
CU7T44G. . . . . . . . . . . . . . . . . . . . . 183
Cupped Forceps . . . . . . . . . . . . . . . . 120
Current Clamp. . . . . . . . . . . . . . 14, 15
Current Electrode . . . . . . . . . . . . . . . . 14
Current Generator. . . . . . . . . . . . . . . . 11
Current Sources . . . . . . . . . . . . . . . . . 31
Cuticle nipper. . . . . . . . . . . . . . . . . . 159
Cutters. . . . . . . . . . . . . . . . . . . . . . . 157
CW-MICROCAPSTAR. . . . . . . . . . . . . . 47
CW-MRI-1. . . . . . . . . . . . . . . . . . . . . . 47
CW-SAR-830/AP. . . . . . . . . . . . . . . . . 47
D
DAM Series Bioamplifiers. . . . . . . . . . . 8
Dam50. . . . . . . . . . . . . . . . . . . . . . . . . 8
Dam80. . . . . . . . . . . . . . . . . . . . . . . . . 9
DAM80P. . . . . . . . . . . . . . . . . . . . . . . . 9
Data Acquisition. . . . . . . . . . . . . . . . 102
Data Recorder. . . . . . . . . . . . . . . . . . 102
Data-Trax . . . . . . . . . . . . 103, 104, 106
DC amplifier system. . . . . . . . . . . . . . 12
DC3001L. . . . . . . . . . . . . . . . . . . . . 209
DC3001R. . . . . . . . . . . . . . . . . . . . . 209
DC3314L. . . . . . . . . . . . . . . . . . . . . 209
DC3314R. . . . . . . . . . . . . . . . . . . . . 209
DCAP. . . . . . . . . . . . . . . . . . . . 99, 165
DCAP-L. . . . . . . . . . . . . . . . . . . 99, 165
DCAP-M. . . . . . . . . . . . . . . . . . 99, 165
DeBakey Forceps . . . . . . . . . . 120, 121
Delrin Plastic Tweezers. . . . . . . . . . . 123
Demagnetizer. . . . . . . . . . . . . . . . . . 176
Derf Needle Holder. . . . . . . . . . . . . . 145
Dessicator. . . . . . . . . . . . . . . . . . . . . 171
Diamond Coated Blades. . . . . . . . . . 127
Differential Electrometer. . . . . . . . . . . . 3
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
267
PRODUCT INDEX
501978-6 . . . . . . . . . . . . . . . . . . . . 114
501979-6 . . . . . . . . . . . . . . . . . . . . 114
501980-6. . . . . . . . . . . . . . . . . . . . 114
501981-6. . . . . . . . . . . . . . . . . . . . 114
502193-4. . . . . . . . . . . . . . . . . . . . 189
503078-4. . . . . . . . . . . . . . . . . . . . 189
503079-4. . . . . . . . . . . . . . . . . . . . 189
503080-4. . . . . . . . . . . . . . . . . . . . 189
503081-4. . . . . . . . . . . . . . . . . . . . 188
503082-4. . . . . . . . . . . . . . . . . . . . 189
503088-10. . . . . . . . . . . . . . . . . . . 188
503359-G. . . . . . . . . . . . . . . . . . . . 137
555001FT. . . . . . . . . . . . . . . . . . . . 116
555005FT. . . . . . . . . . . . . . . . . . . . 116
555007FT. . . . . . . . . . . . . . . . . . . . 116
555009FT. . . . . . . . . . . . . . . . . . . . 116
555041FT. . . . . . . . . . . . . . . . . . . . 116
555047FT. . . . . . . . . . . . . . . . . . . . 116
555056FT. . . . . . . . . . . . . . . . . . . . 118
555222F. . . . . . . . . . . . . . . . . . . . . 123
555223F. . . . . . . . . . . . . . . . . . . . . 123
555227F. . . . . . . . . . . . . . . . . . . . . 116
555229F. . . . . . . . . . . . . . . . . . . . . 116
555230F. . . . . . . . . . . . . . . . . . . . . 116
555243F. . . . . . . . . . . . . . . . . . . . . 118
555419NT. . . . . . . . . . . . . . . . . . . . 143
555500S. . . . . . . . . . . . . . . . . . . . . 131
555523S. . . . . . . . . . . . . . . . . . . . . 129
555524S. . . . . . . . . . . . . . . . . . . . . 129
555525S. . . . . . . . . . . . . . . . . . . . . 129
555526S. . . . . . . . . . . . . . . . . . . . . 129
555530S. . . . . . . . . . . . . . . . . . . . . 129
555540S. . . . . . . . . . . . . . . . . . . . . 130
555541S. . . . . . . . . . . . . . . . . . . . . 130
555560S. . . . . . . . . . . . . . . . . . . . . 131
555561S. . . . . . . . . . . . . . . . . . . . . 131
555562S. . . . . . . . . . . . . . . . . . . . . 131
555580S. . . . . . . . . . . . . . . . . . . . . 129
555583S. . . . . . . . . . . . . . . . . . . . . 131
555584S. . . . . . . . . . . . . . . . . . . . . 131
555646S. . . . . . . . . . . . . . . . . . . . . 134
555656S. . . . . . . . . . . . . . . . . . . . . 139
555659S. . . . . . . . . . . . . . . . . . . . . 136
555801L. . . . . . . . . . . . . . . . . . . . . 151
555827L. . . . . . . . . . . . . . . . . . . . . 115
555828L. . . . . . . . . . . . . . . . . . . . . 117
5B120F-4 . . . . . . . . . . . . . . . . . . . . 194
5B120F-6 . . . . . . . . . . . . . . . . . . . . 194
711P. . . . . . . . . . . . . . . . . . . . 21, 238
712P. . . . . . . . . . . . . . . . . . . . . . . . 6, 7
715P. . . . . . . . . . . . . . . . . . . . . . . 6, 7
7600S. . . . . . . . . . . . . . . . . . . . 98, 99
7B100F-4 . . . . . . . . . . . . . . . . . . . . 194
7B120F-4 . . . . . . . . . . . . . . . . . . . . 194
8-Channel Digital Stimulator. . . . . . . 24
900A. . . . . . . . . . . . . . . . . . . . . . . . . 22
900AP. . . . . . . . . . . . . . . . . . . . . . . . 22
900APP. . . . . . . . . . . . . . . . . . . . . . . 22
Item
PRODUCT INDEX
Item
Page
Digital Linear Stimulus Isolator. . . . . 29
Digital Caliper . . . . . . . . . . . . . . . . . 181
Digital Data Recorder. . . . . . . . . . . . 102
Digital Display Stereotaxic Instrument.49
Digital Micrometer. . . . . . . . . . . . . . 181
Digital Micrometer Head. . . . . . . . . . 206
Digital Microscope Camera. . . . . . . . 230
Digital Stimulator. . . . . . . . . . . . . . . . 24
Dilator Forceps. . . . . . . . . . . . . . . . . 121
Displacement Transducer . . . . . . . . . . 16
Disposable Ag/AgCl Snap Electrodes.202
Disposable Scalpel. . . . . . . . . . . . . . 156
Disposable Scalpels . . . . . . . . . . . . . 156
Dissecting Kit. . . . . . . . . . . . . . . . . . 168
Dissecting Knife. . . . . . . . . . . . . . . . 156
Dissecting Needles, . . . . . . . . . . . . . 161
Dissecting Pad Kit . . . . . . . . . 168, 180
Dissecting Scissors. . . . . . . . . . . . . . 134
Dissection Probes. . . . . . . . . . . . . . . 160
Dissolved oxygen meter. . . . . . . . . . . 70
DLS100 . . . . . . . . . . . . . . . . . . . . . . . 29
DMF1000. . . . . . . . . . . . . . . . . . . . . 236
DMF1000-H5. . . . . . . . . . . . . . . . . . 237
DMP. . . . . . . . . . . . . . . . . . . . . . . . . 259
Dressing Forceps . . . . . . . . . . . . . . . 119
DRIREF-2. . . . . . . . . . . . . . . . . . . . . . 73
DRIREF-2SH. . . . . . . . . . . . . . . . . . . . 73
DRIREF-450. . . . . . . . . . . . . . . . . . . . 73
DRIREF-5. . . . . . . . . . . . . . . . . . . . . . 73
DRIREF-5SH. . . . . . . . . . . . . . . . . . . . 73
DRIREF-L. . . . . . . . . . . . . . . . . . . . . . 73
Dri-Ref™. . . . . . . . . . . . . . . . . . . . . . . 73
Driven guard shield . . . . . . . . . . . . 4, 7
DRL . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Dry Sterilizer . . . . . . . . . . . . . . . . . . 175
DS8000. . . . . . . . . . . . . . . . . . 24, 25
DSPL . . . . . . . . . . . . . . . . . . . . . . . . . 16
Dual Microiontophoresis Generator. . . 11
Dual Microprobe System. . . . . . . . . . . . 6
Dual Range Force Transducer. . . . . . . 17
Dual Tool-Holder Micromanipulator. 215
Dummy Load Resistor Kit. . . . . . . . . . 31
Dummy Membrane. . . . . . . . . . . . . . . 15
Dumont . . . . . . . . . . . . . . . . . . . . . . 109
Duo 773. . . . . . . . . . . . . . . . . . . . . . . . 6
Dura Dissector. . . . . . . . . . . . . . . . . 161
Dura Hook . . . . . . . . . . . . . . . . . . . . 160
DVC1000. . . . . . . . . . . . . . . . . . . . . . 15
DVC2. . . . . . . . . . . . . . . . . . . . . . . . . 15
DVC3. . . . . . . . . . . . . . . . . . . . . . . . . 15
E
E210 . . . . . . . . . . . . . . . . . . . . . . . . 195
E212 . . . . . . . . . . . . . . . . . . . . . . . . 195
E215 . . . . . . . . . . . . . . . . . . . . . . . . 195
E220 . . . . . . . . . . . . . . . . . . . . . . . . 195
E-28000. . . . . . . . . . . . . . . . . . . . . . . 41
Eagle Pipetters. . . . . . . . . . . . . . . . . 254
Ear Bars, Stereotaxic. . . . . . . . . . . . . . 53
Ear Punch. . . . . . . . . . . . . . . . . . . . . 157
Ear Tags. . . . . . . . . . . . . . . . . . . . . . 157
Economy Micromanipulator . . . . . . . 212
Economy Tweezers. . . . . . . . . . . . . . 114
EHB1. . . . . . . . . . . . . . . . . . . . . . . . 198
EHBF . . . . . . . . . . . . . . . . . . . . . . . . 198
EJA. . . . . . . . . . . . . . . . . . . . . . . . . . 228
EK1 . . . . . . . . . . . . . . . . . . 14, 15, 97
EKC . . . . . . . . . . . . . . . . . . . . . . . 15, 97
EKV . . . . . . . . . . . . . . . . . . 14, 15, 97
EL203 . . . . . . . . . . . . . . . . . . . . . . . 202
EL204 . . . . . . . . . . . . . . . . . . . . . . . 202
EL204D . . . . . . . . . . . . . . . . . . . . . . 202
EL204S . . . . . . . . . . . . . . . . . . . . . . 202
Item
Page
EL208 . . . . . . . . . . . . . . . . . . . . . . . 202
EL208D . . . . . . . . . . . . . . . . . . . . . . 202
EL208WD. . . . . . . . . . . . . . . . . . . . . 202
EL208WS. . . . . . . . . . . . . . . . . . . . . 202
EL212 . . . . . . . . . . . . . . . . . . . . . . . 202
Electro 705. . . . . . . . . . . . . . . . . . . . . . 4
electrochemical measurements. . . . . . . 3
Electrolyte, ISO2. . . . . . . . . . . . . . . . . 70
Electrolyte, ISO-NO. . . . . . . . . . . . . . . 56
Electrometer. . . . . . . . . . . . . . . . . . 3, 4
Electron Paramagnetic Resonance. . . . 64
Electron Spin Resonance. . . . . . . . . . . 64
Electrosurgical Unit. . . . . . . . . . . . . . 172
Elgiloy Microelectrodes. . . . . . . . . . . . 18
ENDOHM-12. . . . . . . . . . . . . . . . . . . 85
ENDOHM-24SNAP. . . . . . . . . . . . . . . 85
ENDOHM-6 . . . . . . . . . . . . . . . . . . . . 85
Endohm™. . . . . . . . . . . . . . . . . . . . . . 85
ENZOL. . . . . . . . . . . . . . . . . . . . . . . 176
Enzymatic Detergent. . . . . . . . . . . . . 176
EP05 . . . . . . . . . . . . . . . . . . . . . . . . 203
EP08 . . . . . . . . . . . . . . . . . . . . . . . . 203
EP1 . . . . . . . . . . . . . . . . . . . . . . . . . 203
EP12 . . . . . . . . . . . . . . . . . . . . . . . . 203
EP2 . . . . . . . . . . . . . . . . . . . . . . . . . 203
EP4 . . . . . . . . . . . . . . . . . . . . . . . . . 203
EP8 . . . . . . . . . . . . . . . . . . . . . . . . . 203
Epithelial Voltohmmeter. . . . . . . . . . . 83
Epoxy. . . . . . . . . . . . . . . . . . . 178, 179
ES5. . . . . . . . . . . . . . . . . . . . . . . . . . 254
ES6. . . . . . . . . . . . . . . . . . . . . . . . . . 254
ES7. . . . . . . . . . . . . . . . . . . . . . . . . . 254
Euthanex Gasket Kit. . . . . . . . . . . . . . 41
Euthanex Lids. . . . . . . . . . . . . . . . . . . 41
EVC3 . . . . . . . . . . . . . . . . . . . . . . . . . 14
EVC4000. . . . . . . . . . . . . . . . . . . . . . 14
EVOM2. . . . . . . . . . . . . . . . . . . . . . . . 83
EXT-6. . . . . . . . . . . . . . . . . . . . . . . . . 38
Extracellular recording . . . . . . . . . . . . . 8
Eye Scissors. . . . . . . . . . . . . . . . . . . 140
Eyepiece Adapter, SLR. . . . . . . . . . . 231
Eyepieces. . . . . . . . . . . . . . . . 223, 225
EZ Anesthesia. . . . . . . . . . . . . . . . . . . 40
EZ-103A. . . . . . . . . . . . . . . . . . . . . . . 41
EZ-104A. . . . . . . . . . . . . . . . . . . . . . . 41
EZ-107A. . . . . . . . . . . . . . . . . . . . . . . 41
EZ-109. . . . . . . . . . . . . . . . . . . . . . . . 41
EZ-1130. . . . . . . . . . . . . . . . . . . . . . . 41
EZ-168. . . . . . . . . . . . . . . . . . . . . . . . 41
EZ-169. . . . . . . . . . . . . . . . . . . . . . . . 41
EZ-211. . . . . . . . . . . . . . . . . . . . . . . . 41
EZ-212. . . . . . . . . . . . . . . . . . . . . . . . 41
EZ-25000. . . . . . . . . . . . . . . . . . . . . . 41
EZ-27000. . . . . . . . . . . . . . . . . . . . . . 41
EZ-320. . . . . . . . . . . . . . . . . . . . . . . . 41
EZ-330. . . . . . . . . . . . . . . . . . . . . . . . 41
EZ-7000. . . . . . . . . . . . . . . . . . . . . . . 40
EZ-830. . . . . . . . . . . . . . . . . . . . . . . . 41
EZ-B800. . . . . . . . . . . . . . . . . . . . . . . 41
EZ-FF900. . . . . . . . . . . . . . . . . . . . . . 40
Item
Page
Fire-Polished. . . . . . . . . . . . . . . . . . . 192
Five-barrel glass. . . . . . . . . . . . . . . . 194
Fixation Forceps. . . . . . . . . . . . . . . . 119
Flexible Light Guides . . . . . . . . . . . . 228
Flexible NO Sensor. . . . . . . . . . . . . . . 57
FLEXREF. . . . . . . . . . . . . . . . . . . . . . . 73
Fluorescent lamp . . . . . . . . . . . . . . . 223
FluoroDish . . . . . . . . . . . . . . . . . . . . 232
FOIMPH. . . . . . . . . . . . . . . . . . . . . . 198
FOIMPH-LF. . . . . . . . . . . . . . . . . . . . 198
Force Transducers. . . . . . . . . . . . . 17, 79
Forceps. . . . . . . . . . . . . . . . . . 109, 115
FORT transducers. . . . . . . . . . . . . . . . 17
FORT100. . . . . . . . . . . . . . . . . . . . . . 17
FORT1000. . . . . . . . . . . . . . . . . . . . . 17
FORT10-100 . . . . . . . . . . . . . . . . . . . 17
FORT10g. . . . . . . . . . . . . . . . . . . . . . 17
FORT25. . . . . . . . . . . . . . . . . . . . . . . 17
FORT250. . . . . . . . . . . . . . . . . . . . . . 17
FORT5000. . . . . . . . . . . . . . . . . . . . . 17
Frame Clamp . . . . . . . . . . . . . . . . . . 189
FrameWorks. . . . . . . . . . . . . . . . . . . 188
Free Radical Analyzer. . . . . . . . . 59, 60
free radical, detection. . . . . . . . . . . . . 64
Friedman Rongeur . . . . . . . . . . . . . . 158
Frog Heart Clips. . . . . . . . . . . . . . . . 150
G
GEL100. . . . . . . . . . . . . . . . . . . . . . 202
Gelpi Retractor. . . . . . . . . . . . . . . . . 153
Glass Capillaries. . . . . . . . . . . . . . . . 192
Glass Handling Forceps . . . . . . . . . . 193
glass micropipettes. . . . . . . . . . . . . . 196
glass rod . . . . . . . . . . . . . . . . . . . . . 194
Glass, Holders & Electrodes. . . . . . . 191
Glue Gun . . . . . . . . . . . . . . . . . 179, 197
GN-NET25. . . . . . . . . . . . . . . . . . . . 247
GN-NET7. . . . . . . . . . . . . . . . . . . . . 247
GN-PC25 . . . . . . . . . . . . . . . . . . . . . 247
GN-PC7 . . . . . . . . . . . . . . . . . . . . . . 247
GN-TTL. . . . . . . . . . . . . . . . . . . . . . . 247
GO1-100. . . . . . . . . . . . . . . . . . . . . 199
GO2-100. . . . . . . . . . . . . . . . . . . . . 199
GO3-100. . . . . . . . . . . . . . . . . . . . . 199
GO4-100. . . . . . . . . . . . . . . . . . . . . 199
Gold Wire. . . . . . . . . . . . . . . . . . . . . 183
Goldman-Fox Scissors. . . . . . . . . . . . 132
Gold-plated pins, sockets. . . . . . . . . . 18
Goldstein Retractor. . . . . . . . . . . . . . 152
GPL-T. . . . . . . . . . . . . . . . . . . . . . . . 227
GR100-4 . . . . . . . . . . . . . . . . . . . . . 194
GR100-6 . . . . . . . . . . . . . . . . . . . . . 194
Graefe forceps. . . . . . . . . . . . . 115, 118
Grip Strength Meter. . . . . . . . . . . . . . 43
GSNO. . . . . . . . . . . . . . . . . . . . . . . . . 63
GSNO-100. . . . . . . . . . . . . . . . . . . . . 63
GSNO-50. . . . . . . . . . . . . . . . . . . . . . 63
g-SPIN. . . . . . . . . . . . . . . . . . . . . . . 190
Guillotine. . . . . . . . . . . . . . . . . . . . . . 99
F
H
FD223A. . . . . . . . . . . . . . . . . . . . . . . . 3
FD223AP. . . . . . . . . . . . . . . . . . . . . . . 3
FD35-100. . . . . . . . . . . . . . . . . . . . 232
FD3510-100 . . . . . . . . . . . . . . . . . . 232
FD35B-100 . . . . . . . . . . . . . . . . . . . 233
FD35COL-100 . . . . . . . . . . . . 232, 233
FD35PDL-100 . . . . . . . . . . . . . . . . . 232
FD5040-100 . . . . . . . . . . . . . . . . . . 232
Fiber Optic Illuminator. . . . . . . . . . . 228
FiberMIC. . . . . . . . . . . . . . . . . . . . . . . 82
Filter Forceps . . . . . . . . . . . . . 122, 123
Haake Circulating Bath. . . . . . . . . . . . 95
Half-Cells . . . . . . . . . . . . . . . . . . . . . 198
Heater Controller . . . . . . . . . . . . . . . 229
Heating Circulator. . . . . . . . . . . . . . . . 95
Heating Filament . . . . . . . . . 235, 237
Heating Plate . . . . . . . . . . . . . . . . . . . 46
high throughput screening. . . . . . . . . 86
Hollow Handle Forceps. . . . . . . . . . . 121
Hooks. . . . . . . . . . . . . . . . . . . . . . . . 160
Horticultural Forceps. . . . . . . . . . . . . 122
Hot Plate Analgesia Meter . . . . . . . . . 45
Item
Page
HS6 . . . . . . . . . . . . . . . . . . . . . . . . . 214
HS6-3. . . . . . . . . . . . . . . . . . . . . . . . 209
HS6-3M. . . . . . . . . . . . . . . . . . . . . . 209
HT-1. . . . . . . . . . . . . . . . . . . . . . . . . . 39
HT-2. . . . . . . . . . . . . . . . . . . . . . . . . . 39
Hydrogen Electrode. . . . . . . . . . . . . . . 74
Hydrogen Peroxide Sensors . . . . 55, 58
Hydrogen Sulfide Sensor . . . . . . . . . . 55
Hydrostatic pressure. . . . . . . . . . . . . 259
I
IE010. . . . . . . . . . . . . . . . . . . . . . . . . 74
IE190. . . . . . . . . . . . . . . . . . . . . . . . . 74
IE200. . . . . . . . . . . . . . . . . . . . . . . . . 74
II-12M229. . . . . . . . . . . . . . . . . . . . . 36
II-12M22931. . . . . . . . . . . . . . . . . . . 36
II-2200. . . . . . . . . . . . . . . . . . . . . . . . 43
II-24M22931. . . . . . . . . . . . . . . . . . . 36
II-2500. . . . . . . . . . . . . . . . . . . . . . . . 43
II-2888 . . . . . . . . . . . . . . . . . . . . . . . 42
II-29M . . . . . . . . . . . . . . . . . . . . . . . . 36
II-29M31. . . . . . . . . . . . . . . . . . . . . . 36
II-336T. . . . . . . . . . . . . . . . . . . . . . . . 45
II-39. . . . . . . . . . . . . . . . . . . . . . . . . . 45
II-390. . . . . . . . . . . . . . . . . . . . . . . . . 45
II-3M229SC. . . . . . . . . . . . . . . . . . . . 36
II-3M229SC31. . . . . . . . . . . . . . . . . . 36
II-520MP. . . . . . . . . . . . . . . . . . . . . . 43
II-600MR. . . . . . . . . . . . . . . . . . . . . . 44
II-6M229. . . . . . . . . . . . . . . . . . . . . . 36
II-6M22931. . . . . . . . . . . . . . . . . . . . 36
II-PE34. . . . . . . . . . . . . . . . . . . . . . . . 44
ILS gas-tight syringes. . . . . . . 250, 253
implantable probe . . . . . . . . . . . . . . . 68
IMPLANTABLE PROBES . . . . . . . . . . . 39
in vitro fertilization. . . . . . . . . . . . . . 252
IN1003 . . . . . . . . . . . . . . . . . . . . . . 183
Incapacitance Meter . . . . . . . . . . . . . . 44
Incremental Hot Cold Plate Analgesia. 44
Indium Wire. . . . . . . . . . . . . . . . . . . 183
Induction Chambers. . . . . . . . . . . . . . 41
Infusion Pump . . . . . . . . . . . . 248, 249
Infusion/Withdrawal Pump. . . . . . . . 250
injector. . . . . . . . . . . . . . . . . . . . . . . 252
INST-APOLLO. . . . . . . . . . . . . . . . . . . 59
Instrument Portfolio . . . . . . . . . . . . . 175
Instrument Tip Protectors. . . . . . . . . 174
Intracellular Amplifier. . . . . . . . . . . 4, 6
intracellular injection . . . . . . . . . . . . 252
INV-101. . . . . . . . . . . . . . . . . . . . . . 226
Inverted Trinocular Microscope. . . . . 226
IO-KIT. . . . . . . . . . . . . . . . . . . . . . . . 262
ion selective electrodes. . . . . . . . . . . . 74
iontophoresis. . . . . . . . . . . . . . . . . . . 11
Iridium Microelectrodes . . . . . . . . . . . 18
Iris Forceps. . . . . . . . . . . . . . . . 117, 118
Iris Scissors . . . . . . . . . . 131, 134, 135
IRM23xxx . . . . . . . . . . . . . . . . . . . . . 19
ISDB System. . . . . . . . . . . . . . . . . . . . 12
ISO2. . . . . . . . . . . . . . . . . . . . . . . . . . 70
ISO2 Filling Solution . . . . . . . . . . . . . 70
ISO-80. . . . . . . . . . . . . . . . . . . . . . . . 10
ISO-80P. . . . . . . . . . . . . . . . . . . . . . . 10
Iso-DAM8A. . . . . . . . . . . . . . . . . . . . . 12
ISO-H2S-2 . . . . . . . . . . . . . . . . . . . . . 55
ISO-HPO-100. . . . . . . . . . . . . . . 55, 58
ISO-HPO-100-H. . . . . . . . . . . . . . . . . 55
ISO-HPO-100-L . . . . . . . . . . . . . 55, 58
ISO-HPO-2. . . . . . . . . . . . . . . . . 55, 58
Isolated Bioamplifier. . . . . . . . . . . . . . 10
Isolated Differential Amplifier. . . . . . . 10
Isometric Force, System for. . . . . . . . . 78
ISO-NOP. . . . . . . . . . . . . . . . . . . 55, 56
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
268
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Item
Page
ISO-NOP Rejuvenator. . . . . . . . . . . . . 63
ISO-NOP007 . . . . . . . . . . . . . . . . 55, 57
ISO-NOP30 . . . . . . . . . . . . . . . . . 55, 57
ISO-NOP30L. . . . . . . . . . . . . . . . . . . . 58
ISO-NOP70L. . . . . . . . . . . . . . . . 55, 58
ISO-NOPF. . . . . . . . . . . . . . . . . . . 55, 57
ISO-NOPF200-L10. . . . . . . . . . . . . . . 58
ISO-NOPFH. . . . . . . . . . . . . . . . . . . . . 55
ISO-NOPNM. . . . . . . . . . . . . . . . 55, 56
ISO-OXY-2 . . . . . . . . . . . . . . . . . 55, 58
Isostim. . . . . . . . . . . . . . . . . . . . . . . . 30
ISO-TEMP-2. . . . . . . . . . . . . . . . . . . . 58
IT-14. . . . . . . . . . . . . . . . . . . . . . . . . . 39
IT-18. . . . . . . . . . . . . . . . . . . . . . . . . . 39
IT-18EXLONG. . . . . . . . . . . . . . . . . . . 39
IT-1E. . . . . . . . . . . . . . . . . . . . . . . . . . 39
IT-21. . . . . . . . . . . . . . . . . . . . . . . . . . 39
IT-23. . . . . . . . . . . . . . . . . . . . . . . . . . 39
J
Jansen retractor . . . . . . . . . . . . . . . . 153
JE671P. . . . . . . . . . . . . . . . . . . . . . . . 75
Jewelers Forceps. . . . . . . . . . . . . . . . 116
Joystick control. . . . . . . . 208, 209, 214
JUV . . . . . . . . . . . . . . . . . . . . . . . . . . 63
K
L
L-32-32 . . . . . . . . . . . . . . . . . . . . . . 228
Lab Coat. . . . . . . . . . . . . . . . . . . . . . 180
Lab Supply Selection Guide . . . . . . . 177
Lab-Trax . . . . . . . . . . . . . . . . . 103, 106
Lapping Film, Alumina. . . . . . . . . . . 239
Lapping Film, Diamond. . . . . . . . . . . 239
Left Handed Scissors. . . . . . . . . . . . . 132
Ligature scissors. . . . . . . . . . . . . . . . 139
Light guides. . . . . . . . . . . . . . . . . . . 228
Lighted Fan Base . . . . . . . . . . . . . . . 222
Linear Stimulus Isolator . . . . . . . . . . . 33
Liquid Ion Exchangers. . . . . . . . . . . . . 74
Lister Bandage scissors . . . . . . . . . . 139
Liston Bone Cutting Forceps. . . . . . . 160
Live cell imaging . . . . . . . . . . . . . . . 229
LOUPES . . . . . . . . . . . . . . . . . . . . . . 167
Low-Pass Filter. . . . . . . . . . . . . . . . . . 11
LPF30. . . . . . . . . . . . . . . . . . . . . . . . . 11
L-Shaped Free Radical Sensor. . . . . . . 93
L-shaped sensors. . . . . . . . . . . . . . . . 58
Luer Valve Kit. . . . . . . . . . . . . . . . . . 184
Page
Luer-to-Tubing Coupler. . . . . . . . . . . 184
LUME. . . . . . . . . . . . . . . . . . . . . . . . . 16
M
M1. . . . . . . . . . . . . . . . . . . . . . . . . . 216
M10. . . . . . . . . . . . . . . . . . . . . . . . . 217
M10L. . . . . . . . . . . . . . . . . . . . . . . . 217
M11. . . . . . . . . . . . . . . . . . . . . . . . . 217
M1L. . . . . . . . . . . . . . . . . . . . . . . . . 216
M2. . . . . . . . . . . . . . . . . 209, 213, 215
M-3 . . . . . . . . . . . . . . . . 209, 212, 215
M325. . . . . . . . . . . . . . . . . . . . . . . . 215
M3301. . . . . . . . . . . . . . . . . . . . . . . 212
M3301EH. . . 205, 208, 212, 214, 215
M3301L. . . . . . . . . . . . . . . . . . . . . . 212
M3301-M3-L. . . . . . . . . . . . . . . . . . 212
M3301-M3-R. . . . . . . . . . . . . . . . . . 212
M3301R. . . . . . . . . . . . . . . . . . . . . . 212
M4C. . . . . . . 209, 212, 213, 214, 215
M5. . . . . . . . . . . . . 209, 213, 215, 216
M6. . . . . . . . . . . . . . . . . 209, 213, 215
M7. . . . . . . . . . . . . . . . . . . . . . . . . . 218
M8. . . . . . . . . . . . . . . . . . . . . . . . . . 216
M9. . . . . . . . . . . . . . . . . . . . . . . . . . 217
Macro sensors . . . . . . . . . . . . . . . . . . 55
Magnetic Ball Joint. . . . . . . . . . . . . . 217
Magnetic Heating Stirrer. . . . . . . . . . 181
Magnetic Holding Devices . . . 216, 218
Magnifying Glasses . . . . . . . . . . . . . 167
Manometer. . . . . . . . . . . . . . . . . . . . 259
Manual Micromanipulator. . . . . . . . . 212
Manual Microsyringe Pump. . . . . . . 259
Mathieu Fine Needle Holder. . . . . . . 145
Mayo Harrington Scissors. . . . . . . . . 136
Mayo Scissors. . . . . . . . . . . . . 137, 140
MB2. . . . . . . . . . . . . . . . . . . . . . . . . 216
MBMPH5-7 . . . . . . . . . . . . . . 195, 198
MBS. . . . . . . . . . . . . . . . . . . . . . . . . 239
McIndoe Dressing Forceps . . . . . . . . 120
MCL3-HS6 . . . . . . . . . . . . . . . . . . . . 209
MCL3-SM325. . . . . . . . . . . . . . . . . . 208
McPherson Forceps. . . . . . . . . . . . . . 116
McPherson-Vannas Scissors. . 126, 127
Mcpherson-Westcott Scissors . . . . . . 131
Mcpherson-Westcott Stitch Scissors. 130
MD4L. . . . . . . . . . . . . . . . . . . . . . . . 215
MD4-M3-L. . . . . . . . . . . . . . . . . . . . 215
MD4-M3-R. . . . . . . . . . . . . . . . . . . . 215
MD4R. . . . . . . . . . . . . . . . . . . . . . . . 215
mechanical allodynia . . . . . . . . . . . . . 42
megohm meter. . . . . . . . . . . . . . . . . . 21
MEH145. . . . . . . . . . . . . . . . . . . . . . 198
MEH1F45. . . . . . . . . . . . . . . . . . . . . 198
MEH1R. . . . . . . . . . . . . . . . . . . . . . . 198
MEH1RF. . . . . . . . . . . . . . . . . . . . . . 200
MEH1S. . . . . . . . . . . . . . . . . . . . . . . 200
MEH1SF. . . . . . . . . . . . . . . . . . . . . . 200
MEH2R. . . . . . . . . . . . . . . . . . . . . . . 200
MEH2RF. . . . . . . . . . . . . . . . . . . . . . 200
MEH2RFW. . . . . . . . . . . . . . . . . . . . 200
MEH2RW. . . . . . . . . . . . . . . . . . . . . 200
MEH2S. . . . . . . . . . . . . . . . . . . . . . . 200
MEH2SF. . . . . . . . . . . . . . . . . . . . . . 200
MEH2SFW. . . . . . . . . . . . . . . . . . . . 200
MEH2SW. . . . . . . . . . . . . . . . . . . . . 200
MEH345. . . . . . . . . . . . . . . . . . . . . . 200
MEH3F45. . . . . . . . . . . . . . . . . . . . . 200
MEH3FW45. . . . . . . . . . . . . . . . . . . 200
MEH3R. . . . . . . . . . . . . . . . . . . . . . . 200
MEH3RF. . . . . . . . . . . . . . . . . . . . . . 200
MEH3RFW. . . . . . . . . . . . . . . . . . . . 200
MEH3RW. . . . . . . . . . . . . . . . . . . . . 200
MEH3S. . . . . . . . . . . . . . . . . . . . . . . 200
Item
Page
MEH3SB. . . . . . . . . . . . . . . . . . . . . . 200
MEH3SBW. . . . . . . . . . . . . . . . . . . . 201
MEH3SF. . . . . . . . . . . . . . . . . . . . . . 201
MEH3SFW. . . . . . . . . . . . . . . . . . . . 201
MEH3SW. . . . . . . . . . . . . . . . . . . . . 201
MEH3W45. . . . . . . . . . . . . . . . . . . . 201
MEH6RF. . . . . . . . . . . . . . . . . . . . . . 201
MEH6RFW. . . . . . . . . . . . . . . . . . . . 201
MEH6SF. . . . . . . . . . . . . . . . . . . . . . 201
MEH6SFW. . . . . . . . . . . . . . . . . . . . 201
MEH7. . . . . . . . . . . . . . . . . . . . . . . . 201
MEH7W. . . . . . . . . . . . . . . . . . . . . . 201
MEH8. . . . . . . . . . . . . . . . . . . . . . . . 201
MEH900R . . . . . . . . . . . . . . . . . . . . 201
MEH900S. . . . . . . . . . . . . . . . . . . . . 201
MES. . . . . . . . . . . . . . . . . . . . . . . . . 238
Metal Microelectrodes. . . . . . . . . . . . . 18
Metzenbaum Scissors. . . . . . . 136, 137
Meyhoefer Curette . . . . . . . . . . . . . . 161
MF200 Microforge. . . . . . . . . . . . . . 235
MF200-H2. . . . . . . . . . . . . . . . . . . . 235
MF200-H3. . . . . . . . . . . . . . . . . . . . 235
MF200-H4. . . . . . . . . . . . . . 235, 237
MF28G-5. . . . . . . . . . . . . . . . . . . . . 197
MF28G67-5. . . . . . . . . . . . . . . . . . . 197
MF34G-5. . . . . . . . . . . . . . . . . . . . . 197
Micro Cannula . . . . . . . . . . . . . . . . . 164
Micro Castroviejo Needle Holder. . . . 143
Micro Coaxial Cables . . . . . . . . . . . . 183
Micro Hemostatic Forceps. . . . . . . . . 123
Micro pH Electrodes . . . . . . . . . . . . . . 72
Micro Sensors for NO. . . . . . . . . . . . . 55
Micro Tissue Holder. . . . . . . . . . . . . . 93
Micro Tweezer . . . . . . . . . . . . . . . . . 119
Micro Vessel Clip Applier . . . . . . . . . 149
Micro4 Controller. . . . . . . . . . 253, 258
MicroBeveler. . . . . . . . . . . . . . . . . . . 239
MicroC . . . . . . . . . . . . . . . . . . . . . . . . 66
microCAPSTAR. . . . . . . . . . . . . . . . . . 47
Microcentrifuge. . . . . . . . . . . . . . . . . 190
Microcentrifuge tube, . . . . . . . . . . . . 190
MICROCP. . . . . . . . . . . . . . . . . . . . . . 66
Microdialysis Pumps. . . . . . . . . . . . . 248
Microdissection Tools. . . . . . . . . . . . 108
Microelectrode Beveler. . . . . . . . . . . 238
Microelectrodes. . . . . . . . . . . . . . . . . . 18
MicroFil . . . . . . . . . . . . . . . . . . . . . . 197
MicroFlow. . . . . . . . . . . . . . . . . . . . . . 68
Microforge . . . . . . . . . . . . . . 235, 236
Microforge Application Guide. . . . . . 234
Microforges, Pullers & Bevelers . . . . 234
MicroImplant . . . . . . . . . . . . . . . . . . . 68
Microintraocular forceps. . . . . . . . . . 122
Microintraocular scissors . . . . . . . . . 141
Microiontophoresis. . . . . . . . . . . . . . . 11
Micromanipulators. . . . . . . . . . . . . . 204
Micrometer Head . . . . . . . . . . . . . . . 206
Micrometer Slide Micromanipulator. 215
Micrometer Transducer Positioner. . . . 91
Micrometer, Digital. . . . . . . . . . . . . . 181
Micropipette Beveler. . . . . . . . . . . . . 238
Micropipette Blanks . . . . . . . . . . . . . 195
Micropipette Calibration. . . . . . . . . . 236
Micropipette Holders . . . . . . . . . . . . 198
Micropipette Storage. . . . . . . . . . . . . 195
Micropositioner. . . . . . . . . . . . . . . . 210
Micropressure System. . . . . . . . . . . . . 22
Microprobe Thermometers. . . . . . . . . 38
Micro-Reference Electrode. . . . . . . . . . 73
microscope slides. . . . . . . . . . . . . . . 233
microscope stage . . . . . . . . . . . . . . . 213
Microscope Stage Adapter . . . . . . . . 213
Microscopes and Cameras . . . . . . . . 220
Item
Page
Microsurgical Knife. . . . . . . . . . . . . . 156
MicroTip. . . . . . . . . . . . . . . . . . . . . . . 68
Microvolume Syringes . . . . . . . . . . . 253
Millivolt & megohm meter . . . . . . . . . 21
Mini Dissecting Scissors. . . . . . . . . . 133
Mini Sensors . . . . . . . . . . . . . . . . . . . 55
Miniature Micropositioners. . . . . . . . 211
Miniature Peristaltic Pump. . . . . . . . 246
MiniFlow . . . . . . . . . . . . . . . . . . . . . . 69
MiniFoil . . . . . . . . . . . . . . . . . . . . . . . 69
MiniScope. . . . . . . . . . . . . . . . . . . 64, 65
MINISTAR. . . . . . . . . . . . . . . . . . . . . 246
MiniTip. . . . . . . . . . . . . . . . . . . . . . . . 69
MityFlex Peristaltic Pump. . . . . . . . . 246
MITY-KIT . . . . . . . . . . . . . . . . . . . . . 246
Mixter Hemostatic Forceps. . . . . . . . 125
MKB Muscle Research System . . . . . . 80
MM1 . . . . . . . . . . . . . . . . . . . . . . . . 211
MM3 . . . . . . . . . . . . . . . . . . . . . . . . 211
MMJR. . . . . . . . . . . . . . . . . . . . . . . . 214
MMP . . . . . . . . . . . . . . . . . . . . . . . . 259
MMP-KIT. . . . . . . . . . . . . . . . . . . . . 259
Mobile Workstations. . . . . . . . . . . . . . 41
modular DC amplifier. . . . . . . . . . . . . 12
Modular Lab Microscope. . . . . . . . . . 227
Mosquito Hemostatic Forceps. . . . . . 123
Motorized Micromanipulator. . 208, 209
Motorized Stereotaxic Instrument. . . . 50
Mouse Kit. . . . . . . . . . . . . . . . . . . . . 163
Mouse Vessel Cannulation Kit . . . . . 164
Mouse/Rat Eye Speculum. . . . . . . . . 151
MPH1. . . . . . . . . . . . . . . . . . . . . . . . 201
MPH3. . . . . . . . . . . . . . . . . . . . . . . . 201
MPH4. . . . . . . . . . . . . . . . . . . . . . . . 201
MPH6P. . . . . . . . . . . . . . . . . . . . . . . 201
MPH6R. . . . . . . . . . . . . . . . . . . . . . . 201
MPH6S. . . . . . . . . . . . . . . . . . . . . . . 201
MPH8. . . . . . . . . . . . . . . . . . . . . . . . 207
MPM10 . . . . . . . . . . . . . . . . . . . . . . 207
MPM20 . . . . . . . . . . . . . . . . . . . . . . 207
MPM-7. . . . . . . . . . . . . . . . . . . . . . . . 35
MPS-2 . . . . . . . . . . . . . . . . . . . . . . . 101
MS300. . . . . . . . . . . . . . . . . . . . . . . . 64
MS314. . . . . . . . . . . . . . . . . . . . . . . 209
MT-23/3. . . . . . . . . . . . . . . . . . . . . . . 39
MT-23/5. . . . . . . . . . . . . . . . . . . . . . . 39
MT-23/8. . . . . . . . . . . . . . . . . . . . . . . 39
MT-26/2. . . . . . . . . . . . . . . . . . . . . . . 39
MT-26/4. . . . . . . . . . . . . . . . . . . . . . . 39
MT-26/6. . . . . . . . . . . . . . . . . . . . . . . 39
MT-29/1. . . . . . . . . . . . . . . . . . . . . . . 39
MT-29/1B. . . . . . . . . . . . . . . . . . . . . . 39
MT-29/2. . . . . . . . . . . . . . . . . . . . . . . 39
MT-29/3. . . . . . . . . . . . . . . . . . . . . . . 39
MT-29/5. . . . . . . . . . . . . . . . . . . . . . . 39
MT-4. . . . . . . . . . . . . . . . . . . . . . . . . . 39
MT-D . . . . . . . . . . . . . . . . . . . . . . . . . 39
Multi-96. . . . . . . . . . . . . . . . . . . . . . . 85
Multi-Barrel Glass. . . . . . . . . . . . . . . 194
Multi-barrel micropipette coupling . . 197
Multichannel Perfusion System. . . . . 101
Multi-Channel Stimulator . . . . . 26, 27
Multi-Channel Tissue Bath . . . . . . . . . 90
Multi-Parameter Monitor. . . . . . . . . . . 35
Multipipette Puller . . . . . . . . . . . . . . 240
multi-port measurement chamber. . . . 62
muscle hyperalgesia. . . . . . . . . . . . . . 43
Muscle Physiology. . . . . . . . . . . . 77, 78
Myobath II. . . . . . . . . . . . . . . . . . . . . 90
N
Nail nippers. . . . . . . . . . . . . . . . . . . 159
NANOFIL . . . . . . . . . . . . . . . . . . . . . 260
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: [email protected] • Internet: www.wpiinc.com
269
PRODUCT INDEX
Kelly Hemostatic Forceps . . . . . . . . . 124
KG Optical Force Transducers. . . . . . . 79
Kilner Scissors. . . . . . . . . . . . . . . . . 132
KITE-L. . . . . . . . . . . . . . . . . . . . . . . . 212
KITE-R . . . . . . . . . . . . . . . . . . . . . . . 212
KITE-TB-L . . . . . . . . . . . . . . . . . . . . . 212
KITE-TB-R. . . . . . . . . . . . . . . . . . . . . 212
Knapp Speculum. . . . . . . . . . . . . . . . 152
KWIK-2 . . . . . . . . . . . . . . . . . . . . . . . 74
KWIKCAL-2. . . . . . . . . . . . . . . . . . . . . 74
Kwik-Cast™ . . . . . . . . . . . . . . . . . . . 179
Kwik-Gard™. . . . . . . . . . . . . . . . . . . 178
KWIKGLUE. . . . . . . . . . . . . . . . . . . . 178
KWIKGUN . . . . . . . . . . . . . . . . . . . . 178
KWIKH-2. . . . . . . . . . . . . . . . . . . . . . 74
KWIKMIX. . . . . . . . . . . . . . . . . . . . . 178
KWIKPOT-2 . . . . . . . . . . . . . . . . . . . . 74
Kwik-Sil™. . . . . . . . . . . . . . . . . . . . . 179
Kwik-Tip™ . . . . . . . . . . . . . . . . . . . . . 74
KWIKTPP-2 . . . . . . . . . . . . . . . . . . . . 74
KZ1101. . . . . . . . . . 37, 122, 164, 196
KZ1106. . . . . . . . . . . . . . . . . . . . . . . 37
Item
PRODUCT INDEX
Item
Page
NanoFil Application Kits. . . . . . . . . . 262
Nanoliter 2000. . . . . . . . . . . . . . . . . 258
Nanoliter Injector. . . . . . . . . . . . . . . 258
NanoSensor . . . . . . . . . . . . . . . . . . . . 56
Needle Holder. . . . . . . . . . . . . . . . . . 143
Needle Holders. . . . . . . . . . . . . . . . . 143
NEEDLE MICROPROBES. . . . . . . . . . . 39
Needles . . . . . . . . . . . . . . . . . . . . . . 147
Neurotransmitter Detection. . . . . . . . . 66
NF26BV-5 . . . . . . . . . . . . . . . . . . . . 260
NF33-36BL. . . . . . . . . . . . . . . . . . . . 261
NF33-36BV . . . . . . . . . . . . . . . . . . . 261
NF33BL-2. . . . . . . . . . . . . . . . . . . . . 261
NF33BV-2 . . . . . . . . . . . . . . . . . . . . 261
NF33FBL-2. . . . . . . . . . . . . . . . . . . . 261
NF33FBV-2. . . . . . . . . . . . . . . . . . . . 261
NF34BL-2. . . . . . . . . . . . . . . . . . . . . 261
NF34BV-2 . . . . . . . . . . . . . . . . . . . . 261
NF35BL-2. . . . . . . . . . . . . . . . . . . . . 261
NF35BV-2 . . . . . . . . . . . . . . . . . . . . 261
NF36BL-2. . . . . . . . . . . . . . . . . . . . . 261
NF36BV-2 . . . . . . . . . . . . . . . . . . . . 261
NFGSK-5 . . . . . . . . . . . . . . . . . . . . . 261
NFINHLD. . . . . . . . . . . . . . . . . . . . . 261
NFQ34-5 . . . . . . . . . . . . . . . . . . . . . 261
Nitric Oxide Sensor Guide . . . . . . . . . 56
Nitric Oxide Sensors. . . . . . . . . . . . . . 55
NL33BL-2. . . . . . . . . . . . . . . . . . . . . 261
NL33BV-2 . . . . . . . . . . . . . . . . . . . . 261
NL33FBV-2. . . . . . . . . . . . . . . . . . . . 261
NL34BL-2. . . . . . . . . . . . . . . . . . . . . 261
NL34BV-2 . . . . . . . . . . . . . . . . . . . . 261
NMPH1 . . . . . . . . . . . . . . . . . . . . . . . 72
NMPH2 . . . . . . . . . . . . . . . . . . . . . . . 72
NMPH2B . . . . . . . . . . . . . . . . . . . . . . 72
NMPH3 . . . . . . . . . . . . . . . . . . . . . . . 72
NMPH3L. . . . . . . . . . . . . . . . . . . . . . 72
NMPH5 . . . . . . . . . . . . . . . . . . . . . . . 72
NOCHM-4. . . . . . . . . . . . . . . . . . . . . 62
NOCHM-P. . . . . . . . . . . . . . . . . . . . . . 62
Non-Rotating Micrometer. . . . . . . . . 206
NOVA-186. . . . . . . . . . . . . . . . . . . . 228
NOVAFLEX. . . . . . . . . . . . . . . . . . . . 228
Noyes Scissors. . . . . . . . . . . . . . . . . 128
NSA-3. . . . . . . . . . . . . . . . . . . . . . . . . 63
NSR-StereoDrive. . . . . . . . . . . . . . . . . 50
NVSL . . . . . . . . . . . . . . . . . . . . . . . . . 98
NVSLM1. . . . . . . . . . . . . . . . . . . . . . . 98
O
O Ring. . . . . . . . . . . . . . . . . . . . . . . 238
Octyl cyanoacrylate. . . . . . . . . . . . . . 180
Olsen-Hegar Needle holder. . . . . . . . 146
Omega-Tip-Z. . . . . . . . . . . . . . . . . . . . 21
OMEGA-Z. . . . . . . . . . . . . . . . . . . . . . 21
OmniDrill35. . . . . . . . . . . . . . . . . . . 172
Oocyte injection. . . . . . . . . . . . . . . . 258
Open Circuit Potential. . . . . . . . . . . . . 14
Operating Scissors. . . . . . . . . . . . . . 138
Ophthalmic Knife . . . . . . . . . . . . . . . 156
OPT Muscle Research System. . . . . . . 80
Original Pipetter Stand. . . . . . . . . . . 254
Oval-Tipped Forceps. . . . . . . . . . . . . 117
OXELP . . . . . . . . . . . . . . . . . . . . . . . . 70
oxygen dipping probe . . . . . . . . . . . . 69
oxygen electrode. . . . . . . . . . . . . . . . 70
Oxygen Regulators. . . . . . . . . . . . . . . 41
Oxygen Sensors. . . . . . . . . . . . . 55, 58
OxyMicro . . . . . . . . . . . . . . . . . . . . . . 68
OxyMini. . . . . . . . . . . . . . . . . . . 68, 69
Item
Page
P
P-5-10. . . . . . . . . . . . . . . . . . . . . . . 195
P-5-50. . . . . . . . . . . . . . . . . . . . . . . 195
P-7-10 . . . . . . . . . . . . . . . . . . . . . . . 195
Parallel Rail Stereotaxic Instrument. . . 51
paramagnetic species, detection. . . . . 64
Patch Clamp. . . . . . . . . . . . . . . . . . . 193
Paw Pressure Meter. . . . . . . . . . . . . . 43
Paw Volume Meter. . . . . . . . . . . . . . . 43
PB150F-4. . . . . . . . . . . . . . . . . . . . . 194
PB150F-6. . . . . . . . . . . . . . . . . . . . . 194
perfusion chambers . . . . . . . . . . . . . . 96
Perfusion System . . . . . . . . . . . . . . . 101
PERIPRO-2HS. . . . . . . . . . . . . . . . . . 245
PERIPRO-4HS. . . . . . . . . . . . . . . . . . 245
PERIPRO-4LS. . . . . . . . . . . . . . . . . . 245
PERIPRO-8LS. . . . . . . . . . . . . . . . . . 245
Peristaltic pump. . . . . . . . . . . 244, 246
Peri-Star Pro. . . . . . . . . . . . . . . . . . . 244
Pette-Clamp . . . . . . . . . . . . . . . . . . . 254
PG10150-4 . . . . . . . . . . . . . . . . . . . 193
PG10165-4 . . . . . . . . . . . . . . . . . . . 193
PG52151-4 . . . . . . . . . . . . . . . . . . . 193
PG52165-4 . . . . . . . . . . . . . . . . . . . 193
pH electrode. . . . . . . . . . . . . . . . . 72, 75
pH Meter . . . . . . . . . . . . . . . . . . . 71, 75
pH Meter, Fiber Optic. . . . . . . . . . . . . 71
pH mini sensors. . . . . . . . . . . . . . . . . 71
Phaco Sapphire Blade. . . . . . . . . . . . 154
PH-OPTICA-MICRO. . . . . . . . . . . . . . . 71
PH-OPTICA-MINI . . . . . . . . . . . . . . . . 71
pHOptica™. . . . . . . . . . . . . . . . . . . . . 71
Photocell. . . . . . . . . . . . . . . . . . . . . . . 16
pH-Silver. . . . . . . . . . . . . . . . . . . . . . 72
PHYSIOLOGY . . . . . . . . . . . . . . . . . . . 34
Physiology Kit I . . . . . . . . . . . . . . . . 162
Physiology Kit II. . . . . . . . . . . . . . . . 162
PI-305A. . . . . . . . . . . . . . . . . . . . . . 195
PicoNozzle Kit. . . . . . . . . . . . . . . . . . 256
PiezoPatch . . . . . . . . . . . . . . . . . . . . 205
PiezoPatch™ Micromanipulator. . . . . 205
Piezo-Translator . . . . . . . . . . . . . . . . 207
Piggyback. . . . . . . . . . . . . . . . . . . . . 194
Pipette Tips . . . . . . . . . . . . . . . . . . . 255
Pipetter Rack Stand . . . . . . . . . . . . . 254
Pipetters. . . . . . . . . . . . . . . . . . . . . . 254
Planachromatic Objective. . . . . . . . . 223
Plantar Test . . . . . . . . . . . . . . . . . . . . 45
Plastic Surgery Scissors . . . . . . . . . . 133
Platinum / Iridium Teflon Wire. . . . . 183
Platinum / Iridium Wire . . . . . . . . . . 183
Platinum Wire. . . . . . . . . . . . . . . . . . 183
Platinum-iridium Microelectrodes. . . . 18
Plethysmometer. . . . . . . . . . . . . . . . . 43
PM Series. . . . . . . . . . . . . . . . . . . . . 259
PM01. . . . . . . . . . . . . . . . . . . . . . . . 259
PM015. . . . . . . . . . . . . . . . . . . . . . . 259
PM100. . . . . . . . . . . . . . . . . . . . . . . 259
PM5. . . . . . . . . . . . . . . . . . . . . 207, 209
PM6. . . . . . . . . . . . . . . . . . . . . . . . . 207
PM7. . . . . . . . . . . . . . . . . . . . . . . . . 207
PMP-107. . . . . . . . . . . . . . . . . . . . . 240
PNEU transducers. . . . . . . . . . . . . . . 16
PNEU01. . . . . . . . . . . . . . . . . . . . . . . 16
PNEU05. . . . . . . . . . . . . . . . . . . . . . . 16
PNEU15. . . . . . . . . . . . . . . . . . . . . . . 16
Pneumatic PicoPump . . . . . . . . . . . . 256
Polishing Patch Pipettes. . . . . . . . . . 237
PolyFil . . . . . . . . . . . . . . . . . . . . . . . 197
Post . . . . . . . . . . . . . . . . . . . . . . . . . 188
Post Stand . . . . . . . . . . . . . . . . . . . . 225
Potassium Electrode. . . . . . . . . . . . . . 74
Item
Page
Potentiostat . . . . . . . . . . . . . . . . . . . . 66
Potts-Smith Scissors. . . . . . . . . . . . . 133
POWERCORDS. . . . . . . . . . . . . . . . . 187
PPM5000. . . . . . . . . . . . . . . . . . . . . 205
Preamplifier . . . . . . . . . . . . . . . 14, 15
Precision Current Sources. . . . . . . . . . 31
Precision SurgioScope. . . . . . . . . . . . 221
Pre-polarizer. . . . . . . . . . . . . . . . . . . . 63
Pressure Ejection Kit. . . . . . . . . . . . . 195
Pressure Manometer. . . . . . . . . . . . . 259
Pressure Pod . . . . . . . . . . . . . . . . . . . 22
Pressure Sensor. . . . . . . . . . . . . . . . . 16
Probe Holders, Stereotaxic . . . . . . . . . 53
Probes . . . . . . . . . . . . . . . . . . . . . . . 160
Programmable Syringe Pump. . . . . . 247
ProGuide Position/Holder. . . . . . . . . . 75
PSMB5. . . . . . . . . . . . . . . . . . . . . . . 221
PSMT5. . . . . . . . . . . . . . . . . . . . . . . 221
PTPxxx. . . . . . . . . . . . . . . . . . . . . . . 183
PTTxxxx. . . . . . . . . . . . . . . . . . . . . . 183
PTxxxx. . . . . . . . . . . . . . . . . . . . . . . 183
Puller, Programmable. . . . . . . . . . . . 240
pulse generator . . . . . . . . . . . . 26, 28
Pulse Train. . . . . . . . . . . . . . . . . . . . . 26
Pulsemaster™ Stimulator. . . . . . . . . . 26
Pump Selection Guide. . . . . . . . . . . . 243
Pumps & Fluid Handling. . . . . . . . . . 242
Punches. . . . . . . . . . . . . . . . . . . . . . 157
Push-Pull Pump . . . . . . . . . . . . . . . . 251
PV820. . . . . . . . . . . . . . . . . . . . . . . 257
PV830. . . . . . . . . . . . . . . . . . . . . . . 256
PZMIII . . . . . . . . . . . . . . . . . . . . . . . 224
PZMIII-AAC. . . . . . . . . . . . . . . . . . . . 224
PZMIII-BS. . . . . . . . . . . . . . . . . . . . . 224
PZMIV . . . . . . . . . . . . . . . . . . . . . . . 222
PZMIV-BS. . . . . . . . . . . . . . . . . . . . . 222
PZMTIII . . . . . . . . . . . . . . . . . . . . . . 224
PZMTIII-AAC. . . . . . . . . . . . . . . . . . . 224
PZMTIII-AAC-CCTV. . . . . . . . . . . . . . 224
PZMTIII-BS. . . . . . . . . . . . . . . . . . . . 224
PZMTIII-BS-CCTV. . . . . . . . . . . . . . . 224
PZMTIII-CCTV. . . . . . . . . . . . . . . . . . 224
PZMTIV . . . . . . . . . . . . . . . . . . . . . . 222
PZMTIV-BCS. . . . . . . . . . . . . . . . . . . 222
PZMTIV-BS. . . . . . . . . . . . . . . . . . . . 222
PZMTIV-CCTV. . . . . . . . . . . . . . . . . . 222
Q
Quattro. . . . . . . . . . . . . . . . . . . . . . . . 42
R
Rackmounting Hardware . . . . . . . . . 182
Randall Selitto Paw Pressure Meter . . 43
Rat Kit . . . . . . . . . . . . . . . . . . . . . . . 163
Razor Blade Holder. . . . . . . . . . . . . . 156
RBMA-xxxx. . . . . . . . . . . . . . . . . . . . 99
RBMS-xxxx. . . . . . . . . . . . . . . . . . . . . 99
RC1 . . . . . . . . . . . . . . . . . . . . . . . . . . 21
RC1 . . . . . . . . . . . . . . . . . . . . . . . . . 203
RC1T . . . . . . . . . . . . . . . . . . . . . . . . 203
RC2 . . . . . . . . . . . . . . . . . . . . . . . . . 203
RC2F. . . . . . . . . . . . . . . . . . . . . . . . 203
RC3 . . . . . . . . . . . . . . . . . . . . . . . . . 203
RC4 . . . . . . . . . . . . . . . . . . . . . . . . . 203
RC5 . . . . . . . . . . . . . . . . . . . . . . . . . 203
RC6 . . . . . . . . . . . . . . . . . . . . . . . . . 203
RECTAL PROBES. . . . . . . . . . . . . . . . . 39
Rectangular Base. . . . . . . . . . . . . . . 188
Reference Electrodes. . . . . . . . . . . . . . 73
Reflex Clip . . . . . . . . . . . . . . . . . . . . 148
Reflex Clip Applier. . . . . . . . . . . . . . 148
REMS. . . . . . . . . . . . . . . . . . . . . . . . . 87
Item
Page
REMS AutoSampler. . . . . . . . . . . . . . 86
REMS-24. . . . . . . . . . . . . . . . . . . . . . 87
REMS-96. . . . . . . . . . . . . . . . . . . . . . 87
REMS-KIT . . . . . . . . . . . . . . . . . . . . . 87
Replacement Electrode Holder . . . . . 212
Replacement Needles. . . . . . . . . . . . 253
Replacement Tubing. . . . . . . . . . . . . 245
Resistance measurement . . . . . . . . . . 85
RET-2. . . . . . . . . . . . . . . . . . . . . . . . . 39
RET-3. . . . . . . . . . . . . . . . . . . . . . . . . 39
Retractors. . . . . . . . . . . . . . . . . . . . . 151
Ribbon Handle Iris Scissors. . . . . . . 135
Ring Light . . . . . . . . . . . . . . . . . . . . 228
Ring Light Adapter. . . . . . . . . . . . . . 228
Ring Light Guide . . . . . . . . . . . . . . . 228
Ringstand Mounting Kit. . . . . . . . . . . . 9
Ring-Tipped Forceps. . . . . . . . . . . . . 117
Rochester-Carmalt Hemostatic Frcps.125
Rochester-Oschner Hemostatic Frcps.124
Rochester-Pean Hemostatic Forceps. 125
Rodent Brain Matrices . . . . . . . . . . . . 99
Roger Wirecutting Scissors. . . . . . . . 181
Rongeur. . . . . . . . . . . . . . . . . . . . . . 157
Rongeurs. . . . . . . . . . . . . . . . . . . . . 157
Round handled scissors. . . . . . . . . . 141
Round-handled Forceps. . . . . . . . . . 121
RPE-KIT. . . . . . . . . . . . . . . . . . . . . . 262
RTD sensor . . . . . . . . . . . . . . . . . . . . 46
RTV Coating. . . . . . . . . . . . . . . . . . . 179
RTV Prime Coat,. . . . . . . . . . . . . . . . 179
RTV Sealant. . . . . . . . . . . . . . . . . . . 179
Russian Forceps. . . . . . . . . . . . . . . . 120
Ryder Needle Holder . . . . . . . . . . . . 145
S
Sapphire Knife. . . . . . . . . . . . . . . . . 154
SBT-5. . . . . . . . . . . . . . . . . . . . . . . . . 38
Scalpel Blades. . . . . . . . . . . . . . . . . 155
Scalpel Handle. . . . . . . . . . . . . . . . . 155
Schwartz Vessel Clips. . . . . . . . . . . . 149
Scientific Instruments Heidelberg. . . . 77
Scissors. . . . . . . . . . . . . . . . . 126, 132
Scissors, La Grange. . . . . . . . . . . . . 133
Scissors, Mini Dissecting. . . . . . . . . 133
Scissors, Round handled . . . . . . . . . 141
Scotch-Weld. . . . . . . . . . . . . . . . . . . 178
Screwdriver Set . . . . . . . . . . . . . . . . 181
SDR2. . . . . . . . . . . . . . . . . . . . . . . . . 73
Self-retaining Retractor. . . . . . . . . . 152
Senn Retractor. . . . . . . . . . . . . . . . . 153
Sensor Guide. . . . . . . . . . . . . . . . . . . 55
Septum Theta. . . . . . . . . . . . . . . . . . 194
Seven-barrel glass. . . . . . . . . . . . . . 194
SGE syringes. . . . . . . . . . . . . . . . . . 253
SI-40-8 . . . . . . . . . . . . . . . . . . . . . . 228
SI-72-8 . . . . . . . . . . . . . . . . . . . . . . 228
Signal Generator . . . . . . . . . . . . . . . . 28
SILFLEX-2 . . . . . . . . . . . . . . . . . . . . 261
Silicone RTV. . . . . . . . . . . . . . . . . . . 179
Silicone Tubing. . . . . . . . . . . . 245, 246
Silver Clips. . . . . . . . . . . . . . . . . . . . 148
Silver Epoxy. . . . . . . . . . . . . . . . . . . 179
Silver Wire. . . . . . . . . . . . . . . . . . . . 183
Single Barrel . . . . . . . . . . . . . . . . . . 192
SM325 . . . . . . . . . . . . . . . . . . . . . . 208
SM325-M . . . . . . . . . . . . . . . . . . . . 208
SNAP. . . . . . . . . . . . . . . . . . . . . . . . . 63
SNAP100. . . . . . . . . . . . . . . . . . . . . . 63
S-nitrosoglutathione. . . . . . . . . . . . . . 63
S-Nitroso-N-acetyl-D,L-penicillamine. . 63
SP100i. . . . . . . . . . . . . . . . . . . . . . . 248
SP101i. . . . . . . . . . . . . . . . . . . . . . . 248
Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office.
270
UK: Tel: 01438-880025 • [email protected]
Germany: Tel: 030-6188845 • [email protected]
China: Tel: 21 68885517 • [email protected]
Item
Page
Page
SYS-BP1. . . . . . . . . . . . . . . . . . . . . . . 37
SYS-DAM50. . . . . . . . . . . . . . . . . . . . . 9
SYS-DAM80. . . . . . . . . . . . . . . . . . . . . 9
SYS-DVC1000 . . . . . . . . . . . . . . . . . . 15
SYS-EVC4000. . . . . . . . . . . . . . . . . . . 14
SYS-ISO2 . . . . . . . . . . . . . . . . . . . . . . 70
SYS-LPF30. . . . . . . . . . . . . . . . . . . . . 11
SYS-MICROC. . . . . . . . . . . . . . . . . . . 66
SYS-OMEGAZ. . . . . . . . . . . . . . . . . . . 21
SYS-PV820. . . . . . . . . . . . . . . . . . . . 256
SYS-PV830. . . . . . . . . . . . . . . . . . . . 256
SYS-TBM4M. . . . . . . . . . . . . . . . . . . . . 5
T
Tail Flick Test . . . . . . . . . . . . . . . . . . . 45
TAXIC-600. . . . . . . . . . . . . . . . . . . . . 48
TAXIC-603. . . . . . . . . . . . . . . . . . . . . 48
TAXIC-650. . . . . . . . . . . . . . . . . . . . . 48
TAXIC-653. . . . . . . . . . . . . . . . . . . . . 48
TAXIC-900. . . . . . . . . . . . . . . . . . . . . 49
TAXIC-903. . . . . . . . . . . . . . . . . . . . . 49
TAXIC-950. . . . . . . . . . . . . . . . . . . . . 49
TAXIC-953. . . . . . . . . . . . . . . . . . . . . 49
TB-1. . . . . . . . . . . . . . . . . . . . . . . . . 212
TBM4M . . . . . . . . . . . . . . . . . . . . . . . . 5
TBR1025. . . . . . . . . . . . . . . . . . . . . . 60
TBR4100. . . . . . . . . . . . . . . . . . . . . . 61
TBS. . . . . . . . . . . . . . . . . . . . . 209, 213
TCJ3050. . . . . . . . . . . . . . . . . . . . . . 183
TCK3050. . . . . . . . . . . . . . . . . . . . . 183
TEER measurement. . . . . 83, 84, 85, 86
Teflon-Coated Cupped Forceps . . . . . 120
Temperature Controller. . . . . . . . . . . . 46
temperature probe . . . . . . . . . . . . . . 229
Temperature Probes . . . . . . . . . . . . . . 38
Temperature Sensor . . . . . . . . . . . . . . 58
Tenotomy Scissors . . . . . . . . . 135, 136
TGWxxxx . . . . . . . . . . . . . . . . . . . . . 183
Thermal Cautery. . . . . . . . . . . . . . . . 170
Thermocouple Wire. . . . . . . . . . . . . . 183
Thin Wall. . . . . . . . . . . . . . . . . . . . . 192
Three-barrel glass. . . . . . . . . . . . . . . 194
Tilt Base. . . . . . . . . . . . . . . . . 209, 213
Tilt Base Assembly. . . . . . . . . . . . . . 239
Tip Protectors. . . . . . . . . . . . . . . . . . 174
TIP01TW1F . . . . . . . . . . . . . . . . . . . 196
TIP01TW1F-L. . . . . . . . . . . . . . . . . . 196
TIP02TW1F . . . . . . . . . . . . . . . . . . . 196
TIP02TW1F-L. . . . . . . . . . . . . . . . . . 196
TIP03TW1F . . . . . . . . . . . . . . . . . . . 196
TIP03TW1F-L. . . . . . . . . . . . . . . . . . 196
TIP04TW1F . . . . . . . . . . . . . . . . . . . 196
TIP04TW1F-L. . . . . . . . . . . . . . . . . . 196
TIP05TW1F . . . . . . . . . . . . . . . . . . . 196
TIP05TW1F-L. . . . . . . . . . . . . . . . . . 196
TIP10TW1. . . . . . . . . . . . . . . . . . . . 196
TIP10TW1-L. . . . . . . . . . . . . . . . . . . 196
TIP10TW1LS01 . . . . . . . . . . . . . . . . 196
TIP10TW1LS02 . . . . . . . . . . . . . . . . 196
TIP10XV119 . . . . . . . . . . . . . . . . . . 196
TIP1TW1. . . . . . . . . . . . . . . . . . . . . 196
TIP1TW1-L. . . . . . . . . . . . . . . . . . . . 196
TIP2TW1. . . . . . . . . . . . . . . . . . . . . 196
TIP2TW1-L. . . . . . . . . . . . . . . . . . . . 196
TIP30TW1. . . . . . . . . . . . . . . . . . . . 196
TIP30TW1-L. . . . . . . . . . . . . . . . . . . 196
TIP30TW1LS01. . . . . . . . . . . . . . . . 196
TIP30TW1LS02. . . . . . . . . . . . . . . . 196
TIP5TW1. . . . . . . . . . . . . . . . . . . . . 196
TIP5TW1-L. . . . . . . . . . . . . . . . . . . . 196
TIP5TW1LS01 . . . . . . . . . . . . . . . . . 196
TIP5TW1LS02 . . . . . . . . . . . . . . . . . 196
Item
Page
TIPCA. . . . . . . . . . . . . . . . . . . . . . . . . 74
TIPH. . . . . . . . . . . . . . . . . . . . . . . . . . 74
TIPK. . . . . . . . . . . . . . . . . . . . . . . . . . 74
TIPMIX01-05. . . . . . . . . . . . . . . . . . 196
TIPMIX01-05-L . . . . . . . . . . . . . . . . 196
TIPMIX05-10. . . . . . . . . . . . . . . . . . 196
TIPMIX05-10-L . . . . . . . . . . . . . . . . 196
TIPTPP. . . .