Toshiba OD-FC34M Datasheet

Date of Preparation

Date of Revised

MATERIAL SAFETY DATA SHEET

: January 15, 2013

:

March 1, 2013

MSDS No. : ODFC34YMCKPW1W

Page 1 of 4

SECTION 1 CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

Product Name

Used for

Company Name

Address

: OD-FC34K/OD-FC34Y/OD-FC34M/OD-FC34C (Drum included)

: Toshiba Copiers, e-STUIDO287CS/347CS/407CS

: Toshiba TEC Corporation

: Gatecity Ohsaki West Tower

Telephone Number

1-11-1, Osaki, Shinagawa-ku, Tokyo 141-0032, Japan

: +81-3-6830-9300

Contact : (1) Toshiba America Business Solutions, Inc.

Emergency Telephone. No. : +1-800-424-9300

For calls within the U.S. only.

(2) Toshiba of Canada Limited

Telephone. No.

: +1-905-470-3500

For calls within Canada only.

(3) Toshiba TEC Germany Imaging Systems GmbH

Telephone. No.

: +49-2131-1245-0

(European Headquarter)

(4) Toshiba (Australia) Pty, Ltd.

Telephone. No.

: +61-2-98876000

SECTION 2 HAZARDS IDENTIFICATION

EMERGENCY OVERVIEW : Green, odorless and solid cylinder. None hazardous product.

POTENTIAL HEALTH EFFECTS

: Based on animal testing, this product is presumed to be no health effects.

SECTION 3 COMPOSITION / INFORMATION ON INGREDIENTS

COMPOSITION/INFORMATION

Ingredients

Aluminium cylinder

Binder resin

Photosensitive material

Pigment

Proportion

>97%

<1%

<1%

<1%

CAS No.

Confidential

Confidential

Confidential

Confidential

SECTION 4 FIRST AID MEASURES

IN CASE OF EYE CONTACT : No eye contact in normal use. If exposed to the dust of photoconductive layer, flush eyes with water. Get medical attention, if feels irritation.

IN CASE OF SKIN CONTACT : None treatment is required. If exposed to much of the dust of photoconductive layer, wash out with water.

IN CASE OF INHALATION : No inhalation in normal use. If exposed to the dust of photoconductive

IN CASE OF INGESTION layer, get medical attention if cough or other symptoms develop.

: No ingestion in normal use. If swallowed the dust of photoconductive layer, induce vomiting as much as possible. Get medical attention, if feels something bad.

MATERIAL SAFETY DATA SHEET

MSDS No.

: ODFC34YMCKPW1W

Product Identity ：　 OD-FC34K/OD-FC34Y/OD-FC34M/OD-FC34C (Drum included) 2 of 4

SECTION 5 FIRE FIGHTING MEASURES

EXTINGUISHING MEDIA : CO2, Dry chemical, Foam or Water

SPECIAL FIRE-FIGHTING PROCEDURES

: None

SECTION 6 ACCIDENTAL RELEASE MEASURES

PERSONAL PRECAUTIONS : None required under normal use.

ENVIRONMENTAL PRECAUTIONS

: None required under normal use.

METHODS FOR CLEANING UP

: Collect. No special precautions required in collection.

SECTION 7 HANDLING AND STORAGE

HANDLING : No special precaution. Do not touch the photoconductive layer directly, expose to organic solvent vapor or sunlight to prevent degradation.

STORAGE : Store in normal temperature, normal humidity and dark place.

Avoid dew condensation, organic solvent vapor.

SECTION 8 EXPOSURE CONTROLS/PERSONAL PROTECTION

OCCUPATIONAL EXPOSURE LIMIT

: ACGIH Not established.

OSHA Not established.

ENGINEERING MEASURES : No required.

PERSONAL PROTECTIVE EQUIPMENT

RESPIRATORY PROTECTION

: None required.

EYE PROTECTION

SKIN PROTECTION

: Use safety glasses.

: No precautions.

SECTION 9 PHYSICAL AND CHEMICAL PROPERTIES

APPEARANCE AND ODOR : Green, odorless and solid cylinder.

DENSITY

VAPOR DENSITY

BOILING POINT

: 2.7

: Not applicable.

: Not applicable.

: Not applicable.

pH

MELTING POINT

LOG P o/w

: Not applicable.

: Not applicable.

VAPOUR PRESSURE

SOLUBILITY IN WATER

: Not applicable.

: Insoluble.

SOLUBILITY IN OTHER SOLVENT

: Photoconductive layer is soluble in organic solvent like Tetrahydrofuran.

FLASH POINT : Not applicable.

AUTOIGNITION TEMPERATURE

: Not applicable.

FLAMMABLE LIMITS : Not applicable.

MATERIAL SAFETY DATA SHEET

MSDS No.

: ODFC34YMCKPW1W

Product Identity ：　 OD-FC34K/OD-FC34Y/OD-FC34M/OD-FC34C (Drum included) 3 of 4

SECTION 10 STABILITY AND REACTIVITY

STABILITY & REACTIVITY : Stable

MATERIALS TO AVOID : Oxidizing material

HAZARDOUS DECOMPOSITION

: None

SECTION 11 SUPPLEMENTAL HEALTH INFORMATION

ACUTE TOXICITY

Oral

Skin

: [ rat ] LD50 >2,000mg/kg 　（Photoconductive layer)

: [ rabbit ] LD50 not available.

SKIN IRRITATION

EYE IRRITATION

SENSITIZING

CHRONIC TOXICITY

MUTAGENICITY

CARCINOGENICITY

: No skin irritation potential to the rabbit skin.

(Photoconductive layer)

: Reversible and minimally eye irritation potential to the eyes of rabbits.

(Photoconductive layer)

:

:

:

Not available.

Not available.

Negative in the Ames test. (Photoconductive layer)

IARC

ACGIH

: -

: -

NTP : Not available.

REPRODUCTIVE TOXICITY : Not available.

SECTION 12 ECOLOGICAL INFORMATION

No data available

SECTION 13 DISPOSAL CONSIDERATION

Any disposal practice should be done under conditions which meet local, state and federal laws and regulations relating to waste. (contact local or state environmental agency for specific rules.)

SECTION 14 TRANSPORTATION INFORMATION

UN Hazardous Class : None allocated.

UN Number : None

SECTION 15 REGULATORY INFORMATION

This product do not fall in the category of the regulations and orders of section 6 and 7 of TSCA

(Toxic Substance Control Act).

MATERIAL SAFETY DATA SHEET

MSDS No.

: ODFC34YMCKPW1W

Product Identity ：　 OD-FC34K/OD-FC34Y/OD-FC34M/OD-FC34C (Drum included) 4 of 4

SECTION 16 OTHER INFORMATION

To the best of the manufacturer's knowledge, the information contained herein is accurate.

However, neither the manufacturer, nor any of its affiliates, make any representations or warranties (expressed or implied), nor assumes any liability (including liability for any direct, incidental, consequential, or other damages) with respect to the accuracy or completeness of the information contained herein.

Such information may be (without limitation) invalid if the specified material is used in combination with another, in a particular process, or under unusual conditions.

Determination of suitability of any material for any given purpose is the sole responsibility of the user who assumes all risk and responsibility therefore.

All materials may present unknown hazards and should be used with appropriate caution.

The manufacturer cannot and does not guarantee that the hazards described herein are the only ones that exist.