spec sheets - Prier Products

spec sheets - Prier Products
PRIER
®
SPEC SHEETS
2015
TABLE OF
Page 4
Page 6
Page 8
Page 10
Page 12
Page 14
Page 16
Page 18
Page 20
CONTENTS
Residential Hydrants
Pages 4-21
Angle Sill Faucets
Pages 51-56
Commercial Hydrants
Pages 23-38
Plumbing Brass
Pages 58-61
300 Wall Hydrant
400 Half Turn Anti-Siphon Wall Hydrant
400-LF Half Turn Anti-Siphon Wall Hydrant
408 Internal Vacuum Breaker Wall Hydrant
C-134 Full Turn Wall Hydrant
C-144 Full Turn Anti-Siphon Wall Hydrant
P-164 Quarter Turn Anti- Siphon Wall Hydrant
C-108 Hot and Cold Anti Siphon Wall Hydrant
C-434 Self-Draining Anti-Siphon Wall Hydrant
Ground Hydrants
Pages 40-49
Drainage Products
Pages 63-73
Specialty Valves
Pages 75-82
RESIDENTIAL
HYDRANTS
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
Replacement Parts
300 Series Freezeless Wall Hydrant
Application
Mansfield Style M-300
•
•
•
•
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
Residential
Freezeless
Solid Brass Body
Easy Grip Handle
2
1
3
5
6
Ordering
Inlet
78-D- ½” MPT x ½” SWT
79-T- ¾” MPT x ½” FPT
80-C- ½” CPVC Glue-In
90-X- ½” Crimp PEX
4
Inlet Styles
3
1
See Below
Stem Assembly, Contains: 1, 2, 3, 4
2
C-134KT-802
Seat Washer Replacement Kit
(00 Beveled)
3
324-1006
Washer (Stainless Steel)
4
339-3002
Packing for Left Hand Packing Nut
(Graphite)
5
337-3001
Left Hand Thread Packing Nut (Plastic)
6
630-7965
Handle & Screw Kit (Grey Plastic
Handle & Stainless Steel Screw)
630-7975
Handle & Screw Kit (Beige Plastic
Handle & Stainless Steel Screw)
337-3012
Space Wedge (Grey, Plastic)
337-3013
Space Wedge (Beige, Plastic)
630-7755
Service Kit for 300/400/500 Series
Contains: 2, 3, 4, 5
/4”
Hydrant Length
*The 630-7755 Wall Hydrant Repair Kit includes parts for the
300, 400 and 500 Series hydrants, some of which are not
pictured here. When repairing a hydrant you will have parts
left over.
D Style
1/2” MIP x 1/2” SWT
X Style
1/2” Crimp PEX
Replacement Stems
Features
378-10
Description
7
The PRIER 300 Series is one of the original freezeless hydrant designs and is installed throughout the United
States. It is available from stock in lengths from 4” to 14”.
Integral cast backflange
Wide screw holes easily secure mounting screws
Solid brass body and seat
Satin nickel plated body maintains attractive finish
Stainless steel handle screw
Easy grip polycarbonate operating handle
Durable ACME threads secure stem at seat end
AFG teflon with graphite packing for easy maintenance
Spacer wedge
Standard “OO” size seat washer
Spout aligning mark
Field repairable with no special tools
Option of grey or beige handle
Part No.
7
PRIER 300 Series provides a year round source of water to areas of structures that are subject to freezing
temperatures. The hydrant valve is connected to the supply piping in the heated portion of the structure, eliminating the possibility of freezing.
•
•
•
•
•
•
•
•
•
•
•
•
•
4
ID
C Style
1/2” CPVC Glue-In
T Style
3/4” MIP x 1/2” FIP
Handle Color
- Grey Handle
B- Beige Handle
Length
CC- Close Coupled
04- 4" Insertion
06- 6" Insertion
08- 8" Insertion
10- 10" Insertion
12- 12" Insertion
14- 14" Insertion
Stem Overall Length (OAL)
G Style Manufactured April 2013 - Present
Part No.
Style
Description
Stem Length
M-231-3104
G
Stem for 4” 300 Series Hydrant
6 9/16” OAL
M-231-3106
G
Stem for 6 “ 300 Series Hydrant
8 9/16” OAL
M-231-3108
G
Stem for 8” 300 Series Hydrant
10 9/16” OAL
M-231-3110
G
Stem for 10” 300 Series Hydrant
12 9/16” OAL
M-231-3112
G
Stem for 12” 300 Series Hydrant
14 9/16” OAL
M-231-3114
G
Stem for 14” 300 Series Hydrant
16 9/16” OAL
**For the old style 300 Series wall hydrant stems, see 300 Series retired style spec sheet at www.PRIER.com.
378-K
5
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
Replacement Parts
400 Series Freezeless Wall Hydrant
Application
Mansfield Style M-400
•
•
•
•
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
Residential
Freezeless
Anti-Siphon
Backflow Check Valve
2
3
1
4
6
Features
478-10
Inlet
78-D- ½” MPT x ½” SWT
79-T- ¾” MPT x ½” FPT
80-C- ½” CPVC Glue-In
81-S- ¾” Push-On x ½” SWT
82-F- ¾” MPT x ¾” SWT
90-X- ½” Crimp PEX
91-W- ½” Wirsbo PEX®
92-FX- ¾” Crimp PEX
93-FW- ¾” Wirsbo PEX®
Handle Color
- Grey Handle
B- Beige Handle
Length
CC- Close Coupled
04- 4" Insertion
06- 6" Insertion
08- 8" Insertion
10- 10" Insertion
12- 12" Insertion
14- 14" Insertion
Inlet Styles
3
D Style
1/2” MIP x 1/2” SWT
/4”
Hydrant Length
W Style
1/2” Wirsbo® PEX
C Style
1/2” CPVC Glue-In
T Style
3/4” MIP x 1/2” FIP
F Style
3/4” MIP x 3/4” SWT
See Below
Stem Assembly, Contains: 1, 2, 3, 4, 5
2
C-134KT-802
Seat Washer Replacement Kit
(00 Beveled)
3
336-0002
Backflow Check Valve for 400 Series
4
324-1006
Washer (Stainless Steel)
5
339-3002
Packing for Left Hand Packing Nut
(Graphite)
6
337-3001
Left Hand Thread Packing Nut (Plastic)
7
630-7965
Handle & Screw Kit (Grey Plastic
Handle & Stainless Steel Screw)
630-7975
Handle & Screw Kit (Beige Plastic
Handle & Stainless Steel Screw)
337-3012
Space Wedge (Grey, Plastic)
337-3013
Space Wedge (Beige, Plastic)
630-7500
Universal Vacuum Breaker
Replacement Kit
630-7755
Service Kit for 300/400/500 Series
Contains: 2, 3, 4, 5, 6
630-8500
Complete Service, Handle & Vacuum
Breaker Kit
8
*The 630-7755 Wall Hydrant Repair Kit includes parts for the
300, 400 and 500 Series hydrants, some of which are not
pictured here. When repairing a hydrant you will have parts
left over.
S Style
1/2” SWT x 3/4” Push-On
X Style
1/2” Crimp PEX
1
9
*The 630-7500 Universal Vacuum Breaker Kit fits all current
and past PRIER and Mansfield style residential hydrants.
Replacement Stems
Ordering
6
ASSE 1019 and C-UPC approved
Easy half-turn operation
Integral cast backflange
Wide screw holes easily secure mounting screws
Aluminum vacuum breaker cap with increased durability
Solid brass body and seat
Satin nickel plated body maintains attractive finish
Stainless steel handle screw
Easy grip polycarbonate operating handle
Durable ACME threads secure stem at seat end
Solid stem design with EPDM backflow preventor
AFG teflon with graphite packing for easy maintenance
Field repairable with no special tools
Spout aligning mark
Description
8
The PRIER 400 Series has all the characteristics of the proven 300 Series Wall Hydrant, with the added protection of
a vacuum breaker and backflow preventor. It is available from stock in lengths from 4” to 14”.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Part No.
7
9
PRIER 400 Series provides a year round source of water to areas of structures that are subject to freezing
temperatures. The hydrant valve is connected to the supply piping in the heated portion of the structure, eliminating the possibility of freezing. The PRIER 400 Series features a half-turn design for years of easy operation.
5
ID
FX Style
3/4” Crimp PEX
FW Style
3/4” Wirsbo® PEX
Stem Overall Length (OAL)
H Style Manufactured April 2013 - Present
Part No.
Style
Description
Stem Length
M-231-3204
H
Stem for 4” 400 Series Hydrant
6 9/16” OAL
M-231-3206
H
Stem for 6 “ 400 Series Hydrant
8 9/16” OAL
M-231-3208
H
Stem for 8” 400 Series Hydrant
10 9/16” OAL
M-231-3210
H
Stem for 10” 400 Series Hydrant
12 9/16” OAL
M-231-3212
H
Stem for 12” 400 Series Hydrant
14 9/16” OAL
M-231-3214
H
Stem for 14” 400 Series Hydrant
16 9/16” OAL
**For the old style 400 Series wall hydrant stems, see 400 Series retired style spec sheet at www.PRIER.com.
For older styles made prior to 2007, see the retired 500 Series spec sheet.
478-M
7
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
Application
Mansfield Style M-400-LF
•
•
•
•
•
Residential
Freezeless
Anti-Siphon
Backflow Check Valve
Lead Free
Replacement Parts
400 Series Freezeless Wall Hydrant
2
3
1
4
6
PRIER 400-LF Series is made with lead free brass and provides a year round source of water to areas of
structures that are subject to freezing temperatures. The hydrant valve is connected to the supply piping in the
heated portion of the structure, eliminating the possibility of freezing. The PRIER 400 Series features half-turn
design for years of easy operation.
Features
9
Ordering
78-D- ½” MPT x ½” SWT
90-X- ½” Crimp PEX
8
Length
CC- Close Coupled
04- 4" Insertion
06- 6" Insertion
08- 8" Insertion
10- 10" Insertion
12- 12" Insertion
14- 14" Insertion
1
See Below
Stem Assembly, Contains: 1, 2, 3, 4, 5
2
C-134KT-802
Seat Washer Replacement Kit
(00 Beveled)
3
336-0002
Backflow Check Valve for 400 Series
4
324-1006
Washer (Stainless Steel)
5
339-3002
Packing for Left Hand Packing Nut
(Graphite)
6
337-3001
Left Hand Thread Packing Nut (Plastic)
7
630-7965
Handle & Screw Kit (Grey Plastic
Handle & Stainless Steel Screw)
630-7975
Handle & Screw Kit (Beige Plastic
Handle & Stainless Steel Screw)
337-3012
Space Wedge (Grey, Plastic)
337-3013
Space Wedge (Beige, Plastic)
630-7500
Universal Vacuum Breaker
Replacement Kit
630-7755
Service Kit for 300/400/500 Series
Contains: 2, 3, 4, 5, 6
630-8500
Complete Service, Handle & Vacuum
Breaker Kit
8
9
Inlet Styles
3
D Style
1/2” MIP x 1/2” SWT
/4”
Hydrant Length
*The 630-7755 Wall Hydrant Repair Kit includes parts for the
300, 400 and 500 Series hydrants, some of which are not
pictured here. When repairing a hydrant you will have parts
left over.
X Style
1/2” Crimp PEX
*The 630-7500 Universal Vacuum Breaker Kit fits all current
and past PRIER and Mansfield style residential hydrants.
478-10-LF
Inlet
Description
8
Replacement Stems
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Body and seat composed of solid lead free brass
(PB ≤ 0.25%)
ASSE 1019 and C-UPC approved
Meets NSF 61
Easy half-turn operation
Integral cast backflange
Wide screw holes easily secure mounting screws
Solid brass body and seat
Satin nickel plated body maintains attractive finish
Stainless steel handle screw
Easy grip polycarbonate operating handle
Durable ACME threads secure stem at seat end
Solid stem design with EPDM backflow preventor
AFG teflon with graphite packing for easy maintenance
Field repairable with no special tools
Spout aligning mark
Part No.
7
The PRIER 400 Series has all the characteristics of the proven 300 Series Wall Hydrant, with the added protection of a vacuum breaker and backflow preventor. It is available from stock in lengths from 4” to 14”.
•
5
ID
Handle Color
- Grey Handle
B- Beige Handle
Stem Overall Length (OAL)
H Style Manufactured April 2013 - Present
Part No.
Style
Description
Stem Length
M-231-3204-LF
H
Stem for 4” 400 Series Lead Free Hydrant
6 9/16” OAL
M-231-3206-LF
H
Stem for 6 “ 400 Series Lead Free Hydrant
8 9/16” OAL
M-231-3208-LF
H
Stem for 8” 400 Series Lead Free Hydrant
10 9/16” OAL
M-231-3210-LF
H
Stem for 10” 400 Series Lead Free Hydrant
12 9/16” OAL
M-231-3212-LF
H
Stem for 12” 400 Series Lead Free Hydrant
14 9/16” OAL
M-231-3214-LF
H
Stem for 14” 400 Series Lead Free Hydrant
16 9/16” OAL
**For the old style 400 Series wall hydrant stems, see 400 Series retired style spec sheet at www.PRIER.com.
For older styles made prior to 2007, see the retired 500 Series spec sheet.
478LF-H
9
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
Replacement Parts
408 Series Freezeless Wall Hydrant
Application
Internal Vacuum Breaker
•
•
•
•
Residential
Freezeless
Anti-Siphon
Backflow Check Valve
PRIER 408 Series provides a year round source of water to areas of structures that are subject to freezing temperatures.
The hydrant valve is connected to the supply piping in the heated portion of the structure, eliminating the possibility of
freezing. The PRIER 408 Series features the half-turn design for years of easy operation.
Features
Ordering
408-10
Inlet
08-D- ½” MPT x ½” SWT
09-T- ¾” MPT x ½” FPT
12-F- ¾” MPT x ¾” SWT
20-X- ½” Crimp PEX
21-FX- ¾” Crimp PEX
10
3 4
5
6
7
8
9
12
2”
11
ID
Part No.
Description
1
See Below
Stem Assembly
Contains: 1, 2, 3, 4, 5, 6, 7, 8, 9
2
231-3201
BFP Assembly
3
910-3008
Bibb Screw (Brass)
4
936-3012
Bibb Washer (Rubber)
5
310-3016
Cage Washer (Brass)
6
936-3011
BFP Washer (Rubber)
7
936-3002
Stem End O-Ring (Rubber)
8
324-1006
Washer (Stainless Steel)
9
339-3002
Packing for Left Hand Packing Nut
(Graphite)
10
337-3001
Left Hand Thread Packing Nut (Plastic)
11
630-7965
Handle & Screw Kit (Grey Plastic
Handle & Stainless Steel Screw)
630-7965
Handle & Screw Kit (Beige Plastic
Handle & Stainless Steel Screw)
337-3012
Space Wedge (Grey, Plastic)
337-3013
Space Wedge (Beige, Plastic)
630-7755
Service Kit for 300/400/500 Series
Contains: 3, 4, 5, 6, 7, 8, 9, 10
Hydrant Length
12
Inlet Styles
D Style
Removable
Inspection
Collar
1/2” MIP x 1/2” SWT
X Style
1/2” Crimp PEX
Replacement Stems
ASSE 1019 and C-UPC approved
Internal vacuum breaker and backflow preventor
Easy half-turn operation
Integral cast backflange
Wide screw holes easily secure mounting screws
Siding wedge included with each valve
Solid brass body and seat
Satin nickel plated body maintains finish indefinitely
Easy grip polycarbonate operating handle
Stainless steel handle Screw
Full circle seat threads secure stem to seat end
AFG teflon and graphite packing for easy maintenance
Each valve air-tested at factory for leak free quality
Spout aligning mark
1
10
The PRIER 408 Series has all the characteristics of the historically proven 300 Series Wall Hydrant, with the added
protection of an integral vacuum breaker and backflow preventor. PRIER’s design incorporates the vacuum breaker
and backflow preventor into the operating stem, eliminating an external vacuum breaker on top of the valve.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
2
T Style
3/4” MIP x 1/2” FIP
F Style
3/4” MIP x 3/4” SWT
FX Style
3/4” Crimp PEX
Length
CC- Close Coupled
04- 4" Insertion
06- 6" Insertion
08- 8" Insertion
10- 10" Insertion
12- 12" Insertion
14- 14" Insertion
*The 630-7755 Wall Hydrant Repair Kit includes parts for the
300, 400 and 500 Series hydrants, some of which are not
pictured here. When repairing a hydrant you will have parts
left over.
Stem Overall Length (OAL)
Part No.
Description
Stem Length
M-123-4090
Stem for 4” 400 Series Hydrant
8” OAL
M-123-4092
Stem for 6 “ 400 Series Hydrant
10” OAL
M-123-4093
Stem for 8” 400 Series Hydrant
12” OAL
M-123-4094
Stem for 10” 400 Series Hydrant
14” OAL
M-123-4095
Stem for 12” 400 Series Hydrant
16” OAL
M-123-4096
Stem for 14” 400 Series Hydrant
18” OAL
**400 Series stems are made to fit the 400, 408 and 400-LF Series Wall Hydrants only. They are not
interchangeable with any other models. For parts for Mansfield style anti-siphon hydrants made prior
to 2007, see the retired 500 Series spec sheet.
408-G
11
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
Application
Original Heavy Duty Style
C-234 Loose Key
Design
•
•
•
•
Residential
Freezeless
Slim Seat
Satin Nickel Plated
Replacement Parts
C-134/234 Series Freezeless Wall Hydrant
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
2
5
4
3
S Style
1/2” SWT x 3/4” Push-On
X Style
1/2” Crimp PEX
W Style
1/2” Wirsbo® PEX
Replacement Stems
Features
Ordering
12
Inlet
1- Handle Operated
D- ½” MPT x ½” SWT
2- Vandal Proof Lockshield F- ¾” MPT x ¾” SWT
S- ½” SWT x ¾” Push-On
T- ¾” MIP x ½” FIP
W- ½” Wirsbo PEX®
C- ½” CPVC Glue-In
X- ½” Crimp PEX
FX- ¾” Crimp PEX
FW- ¾” Wirsbo PEX®
D Style
1/2” MIP x 1/2” SWT
C Style
1/2” CPVC Glue-In
C-134D10
Operator
Inlet Styles
Length
CC- Close Coupled
04- 4" Insertion
06- 6" Insertion
08- 8" Insertion
10- 10" Insertion
12- 12" Insertion
14- 14" Insertion
16- 16" Insertion
18- 18" Insertion
20- 20" Insertion
22- 22" Insertion
24- 24" Insertion
XX- Special Size
8
1
The PRIER C-134 is the original freezeless hydrant that is made in the same heavy pattern fashion that made it
famous. It is available from stock in lengths from Close Coupled to 24”. Longer sizes are available upon request.
C-UPC approved
Integral cast flange with built-in drainage pitch
Enclosed screw holes easily secure mounting screws
Solid brass body, valve stem cap, seat and stem ends
Satin nickel plated body maintains attractive finish
Stainless steel seat washer screw and handle screw
Powder coated cast aluminum handle
Durable ACME threads secure stem at seat end
Lock shield cap for stronger valve design
AFG teflon with graphite packing for easy maintenance
Standard “OO” size seat washer
Spout aligning mark
Slim seat inlet for easier installation
3
6
PRIER C-134 provides a year round source of water to areas of structures that are subject to freezing temperatures. The hydrant valve is connected to the supply piping in the heated portion of the structure, eliminating the
possibility of freezing. Ordering the C-234 gives you the same style hydrant but with a vandal proof extended
lockshield with operating key.
•
•
•
•
•
•
•
•
•
•
•
•
•
7
T Style
3/4” MIP x 1/2” FIP
F Style
3/4” MIP x 3/4” SWT
FX Style
3/4” Crimp PEX
/4”
ID
Part No.
Description
1
See Below
Stem Assembly, Contains: 1, 4
2
300-1008
Valve Stem Cap
3
C-134KT-805
Oval Handle and Screw Kit
4
C-134KT-802
Seat Washer Replacement Kit
(00 Beveled)
5
C-134KT-803
Stem Packing Replacement Kit
6
310-1015
Valve Stem Cap for Loose Key
7
390-1001
Stem Packing Only
8
C-108KT-808
Oval Style Key on Lanyard
C-134KT-804
Loose Key Conversion Kit
Contains: 5, 6, 8
C-134KT-807
C-134 Overhaul Kit
Contains: 3, 4, 5
Hydrant Length
Stem Overall Length (OAL)
G Style Manufactured April 2013 - Present
Part No.
Style
Description
Stem Length
P-231-11CC
G
Close Coupled Stem for C-134 Hydrant
4 3/8" OAL
P-231-1104
G
Stem for 4" C-134 Hydrant
6 7/8" OAL
P-231-1106
G
Stem for 6 " C-134 Hydrant
8 7/8" OAL
P-231-1108
G
Stem for 8" C-134 Hydrant
10 7/8" OAL
P-231-1110
G
Stem for 10" C-134 Hydrant
12 7/8" OAL
P-231-1112
G
Stem for 12" C-134 Hydrant
14 7/8" OAL
P-231-1114
G
Stem for 14" C-134 Hydrant
16 7/8" OAL
P-231-1116
G
Stem for 16" C-134 Hydrant
18 7/8" OAL
P-231-1118
G
Stem for 18" C-134 Hydrant
20 7/8" OAL
P-231-1120
G
Stem for 20" C-134 Hydrant
22 7/8" OAL
P-231-1122
G
Stem for 22" C-134 Hydrant
24 7/8" OAL
P-231-1124
G
Stem for 24" C-134 Hydrant
26 7/8" OAL
P-231-11US
G
*Universal Replacement Stem for C-134 Hydrant
Up to 16 7/8" OAL
**For the old style C-134 Series wall hydrant stems, see C-134 Series retired style spec sheet at www.
PRIER.com. PRIER universal stems are replacement stems for any size from close coupled to 14.”
They require cutting the rod to proper length and soldering the brass stem end to the rod as directed in
instructions.
FW Style
3/4” Wirsbo® PEX
C-134-I
13
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
Application
With Anti-Siphon Vacuum Breaker
C-244 Loose Key
Design
•
•
•
•
Residential
Freezeless
Anti-Siphon
Backflow Check Valve
Replacement Parts
C-144/244 Series Freezeless Wall Hydrant
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
2
5
7
3
6
4
8
10
1
9
PRIER C-144 provides a year round source of water to areas of structures that are subject to freezing temperatures. The hydrant valve is connected to the supply piping in the heated portion of the structure, eliminating the
possibility of freezing. Ordering the C-244 gives you the same style hydrant but with a vandal proof extended
lockshield and operating key.
The PRIER C-144 has all the characteristics of the historically proven C-134 with the added protection of an
anti-siphon vacuum breaker and backflow check valve. It is available from stock in lengths from close coupled
to 24”, longer sizes are available on request.
ASSE 1019 and C-UPC approved
Anti-siphon vacuum breaker with backflow check valve
Aluminum vacuum breaker cap with increased durability
Integral cast flange with built-in drainage pitch
Enclosed screw holes easily secure mounting screws
Solid brass body, valve stem cap, seat and stem ends
Satin nickel plated body maintains attractive finish
Stainless steel seat washer screw and handle screw
Powder coated cast aluminum handle
Durable ACME threads secure stem at seat end
Lock shield cap for stronger valve design
AFG teflon with graphite packing for easy maintenance
Standard “OO” size seat washer
Spout aligning mark
Slim seat inlet for easier installation
Ordering
C-144D10
Operator
Inlet
1- Handle Operated
D- ½” MPT x ½” SWT
2- Vandal Proof Lockshield F- ¾” MPT x ¾” SWT
S- ½” SWT x ¾” Push-On
T- ¾” MIP x ½” FIP
W- ½” Wirsbo PEX®
C- ½” CPVC Glue-In
X- ½” Crimp PEX
FX- ¾” Crimp PEX
FW- ¾” Wirsbo PEX®
Length
CC- Close Coupled
04- 4" Insertion
06- 6" Insertion
08- 8" Insertion
10- 10" Insertion
12- 12" Insertion
14- 14" Insertion
16- 16" Insertion
18- 18" Insertion
20- 20" Insertion
22- 22" Insertion
24- 24" Insertion
XX- Special Size
Inlet Styles
D Style
1/2” MIP x 1/2” SWT
S Style
1/2” SWT x 3/4” Push-On
X Style
1/2” Crimp PEX
W Style
1/2” Wirsbo® PEX
Replacement Stems
Features
14
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
3
C Style
1/2” CPVC Glue-In
T Style
3/4” MIP x 1/2” FIP
F Style
3/4” MIP x 3/4” SWT
FX Style
3/4” Crimp PEX
/4”
Hydrant Length
ID
Part No.
Description
1
See Below
Stem Assembly, Contains: 1, 4, 10
2
300-1008
Valve Stem Cap
3
C-134KT-805
Oval Handle and Screw Kit
4
C-134KT-802
Seat Washer Replacement Kit
(00 Beveled)
5
C-134KT-803
Stem Packing Replacement Kit
6
310-1015
Valve Stem Cap for Loose Key
7
390-1001
Stem Packing Only
8
C-108KT-808
Oval Style Key on Lanyard
9
C-144KT-806
Universal Vacuum Breaker Replacement Kit
10
336-0002
Backflow Check Valve for C-144
C-134KT-804
Loose Key Conversion Kit
Contains: 5,6,8
C-144KT-807
C-144 Overhaul Kit
Contains: 3, 4, 5, 9, 10
*The C-144KT-806 Universal Vacuum Breaker Kit fits all current
and past PRIER and Mansfield style residential hydrants.
Stem Overall Length (OAL)
G Style Manufactured April 2013 - Present
Part No.
Style
Description
Stem Length
P-231-12CC
G
Close Coupled Stem for C-144 Hydrant
4 3/8" OAL
P-231-1204
G
Stem for 4" C-144 Hydrant
6 7/8" OAL
P-231-1206
G
Stem for 6 " C-144 Hydrant
8 7/8" OAL
P-231-1208
G
Stem for 8" C-144 Hydrant
10 7/8" OAL
P-231-1210
G
Stem for 10" C-144 Hydrant
12 7/8" OAL
P-231-1212
G
Stem for 12" C-144 Hydrant
14 7/8" OAL
P-231-1214
G
Stem for 14" C-144 Hydrant
16 7/8" OAL
P-231-1216
G
Stem for 16" C-144 Hydrant
18 7/8" OAL
P-231-1218
G
Stem for 18" C-144 Hydrant
20 7/8" OAL
P-231-1220
G
Stem for 20" C-144 Hydrant
22 7/8" OAL
P-231-1222
G
Stem for 22" C-144 Hydrant
24 7/8" OAL
P-231-1224
G
Stem for 24" C-144 Hydrant
26 7/8" OAL
P-231-12US
G
*Universal Replacement Stem for C-144 Hydrant
Up to 16 7/8" OAL
**For the old style C-144 Series wall hydrant stems, see C-144 Series retired style spec sheet at www.
PRIER.com. PRIER universal stems are replacement stems for any size from close coupled to 14.”
They require cutting the rod to proper length and soldering the brass stem end to the rod as directed in
instructions.
FW Style
3/4” Wirsbo® PEX
C-144-K
15
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
Application
Quarter Turn with Soft Grip Handle
P-264 Loose Key
Design
•
•
•
•
Residential
Freezeless
Anti-Siphon
Backflow Check Valve
Replacement Parts
P-164/264 Series Freezeless Wall Hydrant
2
5
7
3
6
4
8
10
1
9
PRIER P-164 provides a year round source of water to areas of structures that are subject to freezing temperatures. The hydrant valve is connected to the supply piping in the heated portion of the structure, eliminating the
possibility of freezing. The P-164 has the added benefit of an easy operation quarter turn that features a proven
compression type seal. Additionally, the P-164 features a soft grip operating handle for easy operation in wet
conditions and cold weather.
Ordering the P-264 gives you the same style hydrant but with a vandal proof extended lockshield and operating
key. It is available from stock in lengths from close coupled to 24”, longer sizes are available on request.
ASSE 1019 and C-UPC approved
Quarter-turn soft-grip coated cast aluminum handle
Anti-siphon vacuum breaker with backflow check valve
Aluminum vacuum breaker cap with increased durability
Integral cast flange with built-in drainage pitch
Enclosed screw holes easily secure mounting screws
Solid brass body, valve stem cap, seat and stem ends
Satin nickel plated body maintains attractive finish
Stainless steel seat washer screw and handle screw
Durable ACME threads secure stem at seat end
Lock shield cap for stronger valve design
AFG teflon with graphite packing for easy maintenance
Standard “OO” size seat washer
Spout aligning mark
Slim seat inlet for easier installation
Ordering
P-164D10
Operator
Inlet
1- Handle Operated
D- ½” MPT x ½” SWT
2- Vandal Proof Lockshield F- ¾” MPT x ¾” SWT
S- ½” SWT x ¾” Push-On
T- ¾” MIP x ½” FIP
W- ½” Wirsbo PEX®
C- ½” CPVC Glue-In
X- ½” Crimp PEX
FX- ¾” Crimp PEX
FW- ¾” Wirsbo PEX®
Length
CC- Close Coupled
04- 4" Insertion
06- 6" Insertion
08- 8" Insertion
10- 10" Insertion
12- 12" Insertion
14- 14" Insertion
16- 16" Insertion
18- 18" Insertion
20- 20" Insertion
22- 22" Insertion
24- 24" Insertion
XX- Special Size
Inlet Styles
D Style
1/2” MIP x 1/2” SWT
S Style
1/2” SWT x 3/4” Push-On
X Style
1/2” Crimp PEX
W Style
1/2” Wirsbo® PEX
C Style
1/2” CPVC Glue-In
Replacement Stems
Features
16
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
3
T Style
3/4” MIP x 1/2” FIP
F Style
3/4” MIP x 3/4” SWT
FX Style
3/4” Crimp PEX
/4”
Hydrant Length
ID
Part No.
Description
1
See Below
Stem Assembly, Contains: 1, 4, 10
2
300-1008
Valve Stem Cap
3
P-164KT-805
Oval Handle and Screw Kit
4
C-134KT-802
Seat Washer Replacement Kit
(00 Beveled)
5
C-134KT-803
Stem Packing Replacement Kit
6
310-1015
Valve Stem Cap for Loose Key
7
390-1001
Stem Packing Only
8
C-108KT-808
Oval Style Key on Lanyard
9
C-144KT-806
Universal Vacuum Breaker Replacement Kit
10
336-0002
Backflow Check Valve for P-164
C-134KT-804
Loose Key Conversion Kit
Contains: 5,6,8
P-164KT-807
P-164 Overhaul Kit
Contains: 3, 4, 5, 9, 10
*The C-144KT-806 Universal Vacuum Breaker Kit fits all current
and past PRIER and Mansfield style residential hydrants.
Stem Overall Length (OAL)
H Style Manufactured April 2013 - Present
Part No.
Style
Description
Stem Length
P-231-15CC
H
Close Coupled Stem for P-164 Hydrant
4 1/2" OAL
P-231-1504
H
Stem for 4" P-164 Hydrant
7" OAL
P-231-1506
H
Stem for 6 " P-164 Hydrant
9" OAL
P-231-1508
H
Stem for 8" P-164 Hydrant
11" OAL
P-231-1510
H
Stem for 10" P-164 Hydrant
13" OAL
P-231-1512
H
Stem for 12" P-164 Hydrant
15" OAL
P-231-1514
H
Stem for 14" P-164 Hydrant
17" OAL
P-231-1516
H
Stem for 16" P-164 Hydrant
19" OAL
P-231-1518
H
Stem for 18" P-164 Hydrant
21" OAL
P-231-1520
H
Stem for 20" P-164 Hydrant
23" OAL
P-231-1522
H
Stem for 22" P-164 Hydrant
25" OAL
P-231-1524
H
Stem for 24" P-164 Hydrant
27" OAL
P-231-15US
H
*Universal Replacement Stem for P-164 Hydrant
Up to 17" OAL
**For the old style P-164 Series wall hydrant stems, see P-164 Series retired style spec sheet at www.
PRIER.com. PRIER universal stems are replacement stems for any size from close coupled to 14.”
They require cutting the rod to proper length and soldering the brass stem end to the rod as directed in
instructions.
FW Style
3/4” Wirsbo® PEX
P-164-H
17
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
Replacement Parts
C-108/208 Hot & Cold Wall Hydrant
ADJU
S
B
TA
C-208 Loose Key
Design
LE
Application
Vertical or Horizontal Installation
•
•
•
•
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
Residential
Freezeless
Anti-Siphon
Hot & Cold Mixing
360
FULL TURN
PRIER C-108 provides a year round source of tempered water to areas of structures that are subject to freezing
temperatures. The hydrant valve is connected to the supply piping in the heated portion of the structure, eliminating the possibility of freezing. The hot side is loose key operated to prevent unauthorized operation. Unique
to its patented design, the same product is available as horizontal or vertical. Ordering the C-208 gives you the
same style hydrant but with vandal proof extended lockshields with operating key on both hot and cold stems.
The PRIER C-108 has all the characteristics of the historically proven C-134 with the added protection of a
self-draining anti-siphon vacuum breaker and backflow check valve. It is available from stock in lengths from
close coupled to 24”, longer sizes are available on request.
Horizontal or vertical installation with same product
Anti-siphon vacuum breaker with backflow check valve
Internal checks to prevent thermal migration
3 1/2” center-to-center installation template provided
Enclosed screw holes easily secure mounting screws
Solid brass body, valve stem cap, seat and stem Ends
Satin nickel plated body maintains attractive finish
Stainless steel seat washer screw and handle screw
Durable ACME threads secure stem at seat end
Lock shield cap for stronger valve design
AFG teflon with graphite packing for easy maintenance
Standard “OO” size seat washer
Spout aligning mark
Ordering
C-108D10
Operator
Inlet
1- Handle Operated
D- ½” MPT x ½” SWT
2- Vandal Proof Lockshield F- ¾” MPT x ¾” SWT
S- ½” SWT x ¾” Push-On
T- ¾” MIP x ½” FIP
W- ½” Wirsbo PEX®
C- ½” CPVC Glue-In
X- ½” Crimp PEX
FX- ¾” Crimp PEX
FW- ¾” Wirsbo PEX®
Inlet Styles
D Style
1/2” MIP x 1/2” SWT
S Style
1/2” SWT x 3/4” Push-On
Length
9
10
7
3
/4”
Hydrant
Length
4
6
13
1
12
3
2
5
3 1/2” Center-to Center
4
1
12
11
5
2
ID
Part No.
Description
ID
Part No.
Description
1
See Below
Stem Assembly, Contains: 1, 4, 12
8
300-0030
Hose Thread Nut
2
300-1008
Valve Stem Cap
9
336-0005
O-Ring for Hose Thread Adapter
3
C-134KT-805
Oval Handle and Screw Kit
10
300-0029
Hose Thread Adapter
4
C-134KT-802
Seat Washer Kit (00 Beveled)
11
C-108KT-805
Red Handle and Screw Kit
5
C-134KT-803
Stem Packing Kit
12
336-0002
Backflow Check Valve for C-108
6
C-108KT-808
Loose Key on Lanyard
13
310-1015
Loose Key Valve Stem Cap
7
P-003CP
Replacement Vacuum Breaker
C-134KT-804
Loose Key Conversion Kit, Contains: 5, 6, 13
Stem Overall Length (OAL)
G Style Manufactured April 2013 - Present
Part No.
Style
Description
Stem Length
P-231-12CC
G
Close Coupled Stem for C-108 Hydrant
4 3/8" OAL
P-231-1204
G
Stem for 4" C-108 Hydrant
6 7/8" OAL
P-231-1206
G
Stem for 6 " C-108 Hydrant
8 7/8" OAL
P-231-1208
G
Stem for 8" C-108 Hydrant
10 7/8" OAL
P-231-1210
G
Stem for 10" C-108 Hydrant
12 7/8" OAL
P-231-1212
G
Stem for 12" C-108 Hydrant
14 7/8" OAL
P-231-1214
G
Stem for 14" C-108 Hydrant
16 7/8" OAL
P-231-1216
G
Stem for 16" C-108 Hydrant
18 7/8" OAL
P-231-1218
G
Stem for 18" C-108 Hydrant
F Style
3/4” MIP x 3/4” SWT
20 7/8" OAL
P-231-1220
G
Stem for 20" C-108 Hydrant
22 7/8" OAL
P-231-1222
G
Stem for 22" C-108 Hydrant
24 7/8" OAL
FX Style
3/4” Crimp PEX
P-231-1224
G
Stem for 24" C-108 Hydrant
26 7/8" OAL
P-231-12US
G
*Universal Replacement Stem for C-108 Hydrant
Up to 16 7/8" OAL
X Style
1/2” Crimp PEX
W Style
1/2” Wirsbo® PEX
C Style
1/2” CPVC Glue-In
CC- Close Coupled
04- 4" Insertion
06- 6" Insertion
08- 8" Insertion
10- 10" Insertion
12- 12" Insertion
14- 14" Insertion
16- 16" Insertion
18- 18" Insertion
20- 20" Insertion
22- 22" Insertion
24- 24" Insertion
XX- Special Size
Replacement Stems
Features
18
•
•
•
•
•
•
•
•
•
•
•
•
•
8
T Style
3/4” MIP x 1/2” FIP
**For the old style C-108 Series wall hydrant stems, see C-108 Series retired style spec sheet at www.
PRIER.com. PRIER universal stems are replacement stems for any size from close coupled to 14.” They require cutting the rod to proper length and soldering the brass stem end to the rod as directed in instructions.
FW Style
3/4” Wirsbo® PEX
C-108-J
19
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
Application
With Integral P-004 Vacuum Breaker
•
•
•
•
Residential
Freezeless
Anti-Siphon
Double Check Valve
Replacement Parts
C-434 Heavy Residential Wall Hydrant
5
5
1
7
2
Ordering
20
1/2” Crimp PEX
W Style
1/2” Wirsbo PEX
D- ½” MPT x ½” SWT
F- ¾” MPT x ¾” SWT
T- ¾” MIP x ½” FIP
W- ½” Wirsbo PEX®
X- ½” Crimp PEX
®
T Style
3/4” MIP x 1/2” FIP
C-434D10
Inlet
Replacement Stems
Features
•
•
•
X Style
F Style
3/4” MIP x 3/4” SWT
Length
CC- Close Coupled
04- 4" Insertion
06- 6" Insertion
08- 8" Insertion
10- 10" Insertion
12- 12" Insertion
14- 14" Insertion
16- 16" Insertion
18- 18" Insertion
20- 20" Insertion
22- 22" Insertion
24- 24" Insertion
XX- Special Size
Materials
Brass
Hard Copper
EPDM
Silicone
Acetal
Stainless Steel
Aluminum
Body, Stem Ends (2), Seat, Valve Stem Cap
Operating Stem, Shaft
Drain Seal O-Ring, Triple Seal Stopper, Packing
Vacuum Breaker Washer
Vacuum Breaker Check Spider
Handle Screw and Seat Pin
Operating Handle
C-434-L
See Below
Stem Assembly, Contains: 1, 5
2
C-134KT-805
Operating Handle and Screw Kit
3
C-434KT-903
Stem Packing and Washer Kit
4
C-434KT-906
Vacuum Breaker Repair Kit
5
C-434KT-902
Stopper and Pin Kit (with tool and o-ring)
6
300-1011
Valve Stem Cap for C-434
7
C-434KT-804
Loose Key Conversion Kit to C-534
C-434KT-907
Overhaul Kit for C-434
Contains: 2, 3, 4, 5
2 1/32”
6
7
1/2” MIP x 1/2” SWT
1
4
Inlet Styles
D Style
Description
3 3/4”
The C-434 combines freezeless hydrant features with self-draining, anti-siphon and two backflow check valves! The vacuum breaker/backflow preventer provides protection against cross-connection of the potable water supply, while venting to eliminate any vacuum. Upon closure, valve drains even with closed end hose attached. No
special installation tools are required.
ASSE 1052 and C-UPC approved
Double check valve and anti-siphon vacuum breaker
Drains automatically with hose attached
Integral cast flange with built-in drainage pitch
Solid brass body, valve stem cap, seat and stem ends
Satin nickel plated body, cap and vacuum breaker
Durable ACME threads secure stem at seat end
Compact and powder coated cast aluminum handle
Metal collar covers drainage holes and protects against insect
nesting while closing under pressure
Multiple vent holes ensure proper draining
Cycle tested to simulate 25 years minimum service
Patent protected
Part No.
*When assembling the vacuum breaker, ensure the dome is
facing out on the check spider and the step is facing out on the
silicone washer.
PRIER C-434 provides a year round source of water to areas of structures that are subject to freezing temperatures. The hydrant valve is connected to the supply piping in the heated portion of the structure, eliminating
the possibility of freezing. To assure freeze protection, the hydrant will drain even with the hose attached and
under pressure without sprayback!
•
•
•
•
•
•
•
•
•
ID
/8”
Hydrant Length
3
Stem Overall Length (OAL)
Part No.
Description
Stem Length
P-231-04CC
Close Coupled Stem for C-434/C-534 Hydrant
3 7/8" OAL
P-231-0404
Stem for 4" C-434/C-534 Hydrant
6 3/4" OAL
P-231-0406
Stem for 6 " C-434/C-534 Hydrant
8 3/4" OAL
P-231-0408
Stem for 8" C-434/C-534 Hydrant
10 3/4" OAL
P-231-0410
Stem for 10" C-434/C-534 Hydrant
12 3/4" OAL
P-231-0412
Stem for 12" C-434/C-534 Hydrant
14 3/4" OAL
P-231-0414
Stem for 14" C-434/C-534 Hydrant
16 3/4" OAL
P-231-0416
Stem for 16" C-434/C-534 Hydrant
18 3/4" OAL
P-231-0418
Stem for 18" C-434/C-534 Hydrant
20 3/4" OAL
P-231-0420
Stem for 20" C-434/C-534 Hydrant
22 3/4" OAL
P-231-0422
Stem for 22" C-434/C-534 Hydrant
24 3/4" OAL
P-231-0424
Stem for 24" C-434/C-534 Hydrant
26 3/4" OAL
**For the old style C-434 Series wall hydrant stems, see C-434 Series retired style spec sheet
at www.PRIER.com.
21
C-534 Light Duty Commercial Wall Hydrant
C-633 Mild Climate Commercial Wall Hydrant
C-634 Heavy Duty Commercial Wall Hydrant
C-734 Heavy Commercial Mixing Hydrant
P-RH1 Flush Mount Roof Hydrant
P-RH2 Post Mount Roof Hydrant
P-RH3 Mild Climate Roof Hydrant
P-RMB Universal Mounting Bracket
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
C-534 Commercial Wall Hydrant
With Integral P-004 Vacuum Breaker
Application
Page 23
Page 25
Page 27
Page 29
Page 31
Page 33
Page 35
Page 37
•
•
•
•
Commercial
Freezeless
Anti-Siphon
Double Check Valve
PRIER C-534 provides a year round source of water to areas of structures that are subject to freezing temperatures. The hydrant valve is connected to the supply piping in the heated portion of the structure, eliminating
the possibility of freezing. To assure freeze protection, the hydrant will drain even with the hose attached and
under pressure without sprayback!
The C-534 combines freezeless hydrant features with self-draining, anti-siphon and two backflow check valves! The vacuum breaker/backflow presenter provides protection against cross-connection of the potable water
supply, while venting to eliminate any vacuum. The C-534 has an extended vandal proof lockshield with loose
key. Upon closure, valve drains even with closed end hose attached. No special installation tools are required.
Features
•
•
•
•
•
•
•
•
•
•
•
•
•
Ordering
COMMERCIAL
HYDRANTS
23
Inlet Styles
ASSE 1052 and C-UPC approved
Double check valve and anti-siphon vacuum breaker
Drains automatically with hose attached
Integral cast flange with built-in drainage pitch
Solid brass body, valve stem cap, seat and stem ends
Satin nickel plated body, cap and vacuum breaker
Durable ACME threads secure stem at seat end
Compact and powder coated cast aluminum handle
Metal collar covers drainage holes and protects against insect
nesting while closing under pressure
Multiple vent holes ensure proper draining
Cycle tested to simulate 25 years minimum service
Patent protected
Field testable as required by ASSE 1052
D Style
1/2” MIP x 1/2” SWT
F Style
3/4” MIP x 3/4” SWT
T Style
3/4” MIP x 1/2” FIP
X Style
1/2” Crimp PEX
C-534D10
Inlet
D- ½” MPT x ½” SWT
F- ¾” MPT x ¾” SWT
T- ¾” MIP x ½” FIP
X- ½” Crimp PEX
Length
CC- Close Coupled
04- 4" Insertion
06- 6" Insertion
08- 8" Insertion
10- 10" Insertion
12- 12" Insertion
14- 14" Insertion
16- 16" Insertion
18- 18" Insertion
20- 20" Insertion
22- 22" Insertion
24- 24" Insertion
XX- Special Size
Materials
Brass
Hard Copper
EPDM
Silicone
Acetal
Stainless Steel
Aluminum
Body, Stem Ends (2), Seat, Valve Stem Cap
Operating Stem, Shaft
Drain Seal O-Ring, Triple Seal Stopper, Packing
Vacuum Breaker Washer
Vacuum Breaker Check Spider
Seat Pin
Loose Key
C-534-K
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
*When assembling the vacuum breaker, ensure the dome is
facing out on the check spider and the step is facing out on the
silicone washer.
1
4
6
3
2
C-633 Mild Climate Commercial Wall Hydrant
With Integral P-004 Vacuum Breaker
Application
Replacement Parts & Stems
5
5
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
• Commercial/Industrial
• Anti-Siphon
• Backflow Check Valve
C-633NSV
7
ID
Part No.
Description
1
See Below
Stem Assembly, Contains: 1, 5
ID
P-231-04CC
P-231-0404
P-231-0406
Stem for 6 “ C-434/C-534 Hydrant, 8 /4” OAL
P-231-0408
Stem for 8” C-434/C-534 Hydrant, 10 3/4” OAL
P-231-0410
360o Swivel Inlet
Part No.
Description
P-231-0420
Stem for 20” C-434/C-534 Hydrant, 22 3/4” OAL
Stem for CC C-434/C-534 Hydrant, 3 /8” OAL
P-231-0422
Stem for 22” C-434/C-534 Hydrant, 24 /4” OAL
Stem for 4” C-434/C-534 Hydrant, 6 3/4” OAL
P-231-0424
Stem for 24” C-434/C-534 Hydrant, 26 3/4” OAL
2
C-108KT-808
Loose Key on Lanyard
3
C-434KT-903
Stem Packing and Washer Kit
Stem for 10” C-434/C-534 Hydrant, 12 /4” OAL
4
C-434KT-906
Vacuum Breaker Repair Kit
P-231-0412
Stem for 12” C-434/C-534 Hydrant, 14 /4” OAL
5
C-434KT-902
Stopper and Pin Kit (with tool and o-ring)
P-231-0414
Stem for 14” C-434/C-534 Hydrant, 16 3/4” OAL
6
300-1021
Valve Stem Cap for C-534
P-231-0416
Stem for 16” C-434/C-534 Hydrant, 18 3/4” OAL
7
C-534KT-804
Handle Conversion Kit to C-434
P-231-0418
Stem for 18” C-434/C-534 Hydrant, 20 3/4” OAL
C-534KT-907
Overhaul Kit for C-534, Contains: 2, 3, 4, 5, 6
7
3
3
3
Front Face Plate View
The ASSE 1052-approved integral vacuum breaker/backflow preventer provides protection against cross-connection with the potable water system, utilizing a check valve to prevent back pressure and a vacuum breaker to vent
in the case of siphonage. A removable operating key is provided to prevent unauthorized usage of the hydrant.
Features
3 3/4”
2 1/32”
7
/8”
Hydrant Length
3”
Ordering
Rough-In Dimensions Specs
Cross Section Top View
The C-633 Series is a heavy duty wall hydrant designed for installation in mild climates. The C-633NSV has a
versatile 360o swivel, while the C-633NCC has a straight brass pipe connection. Both models have inlets that will
connect to either 3/4” MPT or 1” FPT pipe in tight spaces. These commercial wall hydrants are key operated, code
approved, flow up to 19 GPM and have a box option that will allow for installation inside a 6” wall. The PRIER
C-633 Mild Climate Wall Hydrants provide a year-round hose threaded source of water for structures. The C-633
has two options; one that includes a 360o swivel that allows a simple piping orientation inside a narrow wall. The
other, is a close-coupled design for straight supply piping applications.
3
**For the old style C-534 Series wall hydrant stems, see C-534 Series retired style spec sheet at www.PRIER.com.
C-633NCC
Straight Pattern Inlet
Furnish and install Freezeless Model C-534 Commercial Wall Hydrant as manufactured by PRIER Products, Inc. Hydrant shall have automatic
draining capabilities with integral ASSE 1052 approved double check vacuum breaker/backflow preventor. Hydrant shall have 3/4” hose connection with freezeless water flow and self-draining functions. After hydrant is turned in the “off” position, hydrant must be capable of draining
even with the hose attached and under pressure without sprayback. Hydrant shall be constructed of all non-ferrous materials with EPDM sealing
mechanisms. Hydrant body must be satin nickel plated. For stability of operation, hydrant stem shall be secured at the seat end with ACME type
threads and at the handle end with the packing nut. Lockshield must be long enough to ensure operation only with the included operating key.
•
•
•
•
•
•
•
•
•
•
High flow rate, 19 gallons per minute at 25 PSI differential
Heavy patterned, high quality brass castings
Self-draining, even with hose attached and under pressure
Tested to 250,000 cycles; designed to last the life of the plumbing system
EPDM stopper with “triple seal” positive shutoff system for drip-free shutoff
Satin nickel plated body retains original finish for years
Can be installed in horizontal or vertical position
Self-cleaning spring less backflow check valve prevents water hammer and system noise
Drainage ports are large enough to drain valve, and small enough to prevent insect nesting
Listed and labeled to ASSE 1019-B or ASSE 1052, IAPMO/C-UPC
Wall Hydrant Only
Optional Hydrant Box
C-633NCC
Inlet
C-634BX1
Length
CC- Close Coupled
N- 1” MPT x ¾” FPT
SV- 360o Swivel
P- 1” Male SWT x ¾” Female SWT
V- ¾” ProPress Ready
Box Finish
1- Satin Nickel Plated
2- Rough Brass
*P and V inlets only available with CC length
Hydrant must be installed through a 1 1/8” diameter hole without any custom brick cutting. Hydrant body shall incorporate proper drainage pitch
to ensure proper drainage. Operating Key is to be furnished with each hydrant. Hydrant insertion length to be * inches. *Close coupled to 24”
in 2” increments.
24
25
C-633-B
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
8
9
10
C-634 Heavy Commercial Wall Hydrant
11
6
1
2
3
4
*When assembling the vacuum breaker,
ensure the dome is facing out on the
check spider and the step is facing out
on the silicone washer.
Description
ID
Part No.
Description
337-6001
Check Spider-Vacuum Breaker
7
C-634KT-802
Stopper Kit, Includes Stopper and Pin
2
346-6001
Diaphragm-Vacuum Breaker
8
C-633KT-809
Worm Sleeve with O-Ring
3
300-6004
3/4” Hose Piece (NP Brass)
9
C-634KT-809
Worm Drive Assembly with O-Ring
310-6009
1” Hose Piece (NP Brass)
10
300-6003
Valve Stem Cap (NP Brass)
4
399-0001
Secondary Check
11
C-108KT-808
Loose Key on Lanyard
5
C-634KT-806
Vacuum Breaker Assembly
C-633KT-807
C-633 Overhaul Kit, Contains: 5, 6, 7, 11
6
231-06CC
Stem Assembly
NOTE: HYDRANT
FACE DIMENSIONS =
4.75” X 2.50”
3”
C-633NCC (Straight)
NOTE: HYDRANT
FACE DIMENSIONS =
4.75” X 2.50”
.875”
.875”
HYDRANT INSERTION
DEPTH
2.625”
1.75”
HYDRANT INSERTION
DEPTH
2.625”
1.75”
Ordering
Rough-In Dimensions
C-633NSV (360° Swivel)
•
•
•
•
•
•
•
•
•
•
•
•
High flow rate, 19 gallons per minute at 25 PSI differential
Heavy pattern cast brass hydrant for use with or without brass or satin nickel box
Satin nickel plated body retains original finish for years
Heavy duty brass piping, significantly stronger than ordinary copper tubing, with threaded and sealed joints
Simple, solderless design and solid non-ferrous operating rod for long wear life
Patented PRIER “triple seal” positive shutoff system offers triple redundancy to assure shutoff
Patented PRIER quick opening and modulating design require less force and fewer turns to operate
Both 3/4” & 1” hose threads meet ASSE 1019 or ASSE 1052 & CSA B64.2 standards, listed at ASSE, CSA & IAPMO
Multiple vent holes ensure proper draining and reduce problems associated with insect nesting
Design enables valve to be easily secured to any type of inner wall, utilizing the provided clamping ring
Single hole design assists in installation, the product is ideal for tilt-up construction, stone fronts or metal buildings
Field testable as required by ASSE 1052
Wall Hydrant Only
Specs
Furnish and install (choose C-633NSV Model or C-633NCC Model) commercial key operated wall hydrant manufactured by PRIER Products,
Inc. Hydrant shall be surface mounted and shall have automatic draining capabilities with integral vacuum breaker/backflow preventer. Hydrant
shall be capable of flowing a minimum of 15 gallons per minute at 25 PSI pressure change. Hydrant shaft shall be brass with threaded and
sealed connections. Hydrant shall have (choose ¾” or 1”) hose connection with self draining functions, one piece valve plunger, satin nickel
finish, brass operating rod with positive triple-seal shutoff mechanism. Hydrant shall be approved under ASSE 1019-B or ASSE 1052 (choose
option) standards. Operating key with lanyard to be furnished with each hydrant. Hydrant insertion to be specified as C-633NCC (straight with
¾”FPT x 1” MPT connections), C-633PCC (straight with ¾” x 1” sweat connections), C-633VCC (straight with 3/4” press-ready connection) or
C-633NSV (360° swivel with ¾” FPT x 1” MPT connections).
27
Optional Hydrant Box
C-634N10
Hose Thread Outlet
4- ¾” Garden Hose
6- 1” Hose
Optional: Furnish and install hydrant box for each hydrant. Hydrant box shall be manufactured in solid cast brass with a (choose from natural
brass or satin-nickel plated brass) finish. Access to the hydrant box shall be provided by (choose hydrant’s key or cylinder lock and key).
26
Commercial/Industrial
Freezeless
Anti-Siphon
Backflow Check Valve
The integral vacuum breaker/backflow preventor provides protection against cross-connection with the potable
water system, utilizing a check valve to prevent back pressure and a vacuum breaker to vent in the case of
siphonage. A removable operating key is provided to prevent unauthorized usage of the hydrant. No special
installation tools are required.
Features
Part No.
1
•
•
•
•
PRIER C-634 provides a year round source of water to areas of structures that are subject to freezing temperatures. The hydrant valve is connected to the supply piping in the heated portion of the structure, eliminating
the possibility of freezing. To assure freeze protection, the hydrant will drain even with the hose attached and
under pressure.
5
ID
With Integral P-004 Vacuum Breaker
Application
Replacement Parts & Stems
7
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
Inlet
C-634BX1
Length
CC- Close Coupled
N- 1” MPT x ¾” FPT
04- 4" Insertion
P- 1” Male SWT x ¾” Female SWT 06- 6" Insertion
V- ¾” Copper-Press Fitting Ready 08- 8" Insertion
10- 10" Insertion
12- 12" Insertion
14- 14" Insertion
16- 16" Insertion
18- 18" Insertion
20- 20" Insertion
22- 22" Insertion
24- 24" Insertion
XX- Special Size
Box Finish
1- Satin Nickel Plated
2- Rough Brass
C-634-N
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
11
12
*When assembling the vacuum breaker, ensure the
dome is facing out on the check spider and the step is
facing out on the silicone washer. 7
8
3
6
16
15
14
1
10
2
ID
Part No.
Description
1
See Below
Stem Assembly, Contains: 5, 14
ID
P-231-0604
Stem for 4” C-634 Hydrant, 4 /16” OAL
P-231-0606
Stem for 6 “ C-634 Hydrant, 6 11/16” OAL
P-231-0608
Stem for 8” C-634 Hydrant, 8 /16” OAL
P-231-0610
P-231-0612
13
Part No.
Description
310-6009
1” Hose Piece for C-636 (NP Brass)
5
336-0001
O-Ring Worm Sleeve
6
336-6001
O-Ring Worm Drive
7
337-6001
Check Spider-Vacuum Breaker
Stem for 10” C-634 Hydrant, 10 /16” OAL
8
346-6001
Diaphragm-Vacuum Breaker
Stem for 12” C-634 Hydrant, 12 11/16” OAL
10
C-108KT-808
Loose Key on Lanyard
P-231-0614
Stem for 14” C-634 Hydrant, 14 /16” OAL
11
C-634KT-802
Stopper Kit, Includes Stopper and Pin
P-231-0616
Stem for 16” C-634 Hydrant, 16 11/16” OAL
12
324-0004
Pin Only
P-231-0618
Stem for 18” C-634 Hydrant, 18 /16” OAL
13
C-634KT-806
Vacuum Breaker Assembly
P-231-0620
Stem for 20” C-634 Hydrant, 20 /16” OAL
14
C-634KT-808
Worm Sleeve with O-Ring, Pin and Tool
P-231-0622
Stem for 22” C-634 Hydrant, 22 11/16” OAL
15
C-634KT-809
Worm Drive Assembly with O-Ring
11
11
11
11
11
11
P-231-0624
Stem for 24” C-634 Hydrant, 24 /16” OAL
16
C-634WCR
Wall Clamping Ring
2
300-6003
Valve Stem Cap (NP Brass)
17
399-0001
Secondary Check for ASSE 1052
3
300-6004
3/4” Hose Piece (NP Brass)
C-634KT-807
C-634 Overhaul Kit, Contains: 10, 11, 12, 13, 14
11
0.75”
(19 mm)
Hydrant Length*
Hydrant Length*
0.75”
(19 mm)
Inlet Styles
N Style
3/4” (19 mm) FPT
x 1” (25 mm) NPT
P Style
3/4” (19 mm) Female SWT
x 1” (25 mm) Male SWT
V Style
3/4” (19 mm) ProPress Ready
6.50”
(165 mm)
0.25” (6 mm)
4.5”
(114 mm)
2.25”
(55 mm)
1.125”
(28 mm)
6.0”
(152 mm)
2.50”
(63 mm)
*Standard Hydrant
Lengths
4”
102 mm
6”
152 mm
8”
203 mm
10”
254 mm
12”
305 mm
14”
356 mm
16”
406 mm
18”
457 mm
20”
508 mm
22”
559 mm
24”
607 mm
•
•
•
•
•
•
•
Heavy pattern standard hydrant for use with or without polished brass or nickel bronze box
Natural brass finish
Heavy duty brass piping, stronger than ordinary copper tubing, with threaded and sealed joints
Simple, solderless design for years of reliable operation
Solid non-ferrous operating rod for long wear life
Vacuum breaker and backflow preventor approved under ASSE 1011 and CSA B64.2
Design enables stable and easy clamping to inner wall, providing secure hold on non-brick surfaces
Wall Hydrant Only
3- ¾” Garden Hose
5- Self-Draining
Vacuum Breaker
Furnish and install Model C-634 Heavy Commercial Wall Hydrant manufactured by PRIER Products, Inc. Hydrant shall be surface mount and
installed through 1 3/8” round opening. Hydrant shall have automatic draining capabilities with integral vacuum breaker/backflow preventor.
Hydrant shall flow 19 gallons per minute minimum at 25 PSI Differential and be at full flow in 2 handle rotations. Hydrant shaft shall be brass
with threaded and sealed connections. Hydrant shall have 3/4” or 1” (choose one) hose connection with freezeless water flow and self-draining
functions, one piece valve plunger, satin nickel finish, brass operating rod with positive triple seal shutoff mechanism. Hydrant shall be approved
under ASSE 1052 standard. Operating key & wall clamping ring to be furnished with each hydrant. Hydrant insertion length to be * inches.
29
Optional Hydrant Box
C-734N10
Hose Thread Outlet
Optional: Furnish and install flush-mount hydrant box for each valve. Hydrant box shall be manufactured of solid cast brass with a brass or satin
nickel plated brass (choose one) finish. Box may be installed separately and hydrant be insertable and removable from front of the box. Access
to the hydrant box shall be provided by the same operating key as the valve. *4” to 24” in 2” increments.
28
Commercial/Industrial
Freezeless
Hot & Cold Mixing
ASSE/IAPMO Listed
A removable operating key is provided to prevent unauthorized usage of the hydrant. No special installation
tools are required.
Ordering
Rough-In Dimensions Specs
2”
(51 mm)
2.25”
(57 mm)
•
•
•
•
PRIER C-734 Heavy Commercial Hot & Cold Mixing Hydrant provides a year round source of tempered water
to areas of structures that are subject to freezing temperatures. The hydrant valve is connected to the supply
piping in the heated portion of the structure, eliminating the possibility of freezing. The Hydrant is available with
a self-draining vacuum breaker and backflow check valve (PRIER Model C-754) to protect against any cross
contamination possibilities. Common applications include garbage can wash stations at restaurants and service
station bay washers.
Features
**For the old style C-634 Series wall hydrant stems, see C-634 Series retired style spec sheet at www.PRIER.com.
0.187”
(5 mm)
C-734/754 Heavy Commercial Mixing Hydrant
17
Application
Replacement Parts & Stems
5
Inlet
N- 1” MPT x ¾” FPT
C-734BX1
Length
04- 4" Insertion
06- 6" Insertion
08- 8" Insertion
10- 10" Insertion
12- 12" Insertion
14- 14" Insertion
16- 16" Insertion
18- 18" Insertion
20- 20" Insertion
22- 22" Insertion
24- 24" Insertion
XX- Special Size
Box Finish
3- Standard Depth
5- Deep Box
for C-754
Box Finish
1- Satin Nickel Plated
2- Rough Brass
C-734-F
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
3
5
P-RH1 Flush Mount Roof Hydrant
4
1
8
ID
Part No.
Description
1
392-4005
Drive Screw Assembly (Brass)
2
391-4008
Retainer Seal (Nylon)
3
Call PRIER
Operating Rod (Brass)
4
310-4009
Face Nut (Brass)
5
391-2018
Seat (Nylon)
6
392-2020
Plunger (Butyl with Brass Insert)
7
310-4003
Worm Sleeve (Brass)
8
C-108KT-808
Loose Key on Lanyard (Die Cast Aluminum)
1” MPT
x
3/4” FPT
•
•
•
•
Commercial/Industrial
Freezeless
Anti-Siphon
Self Draining
PRIER's P-RH1 Flush Mount Roof Hydrant provides a
year round source of water to roof surfaces in areas with
freezing temperatures. The hydrant is installed flush to the
roof, allowing the hose to run in 360°. The hydrant valve
is connected to the supply piping in the heated portion of
the structure, and is self-draining, eliminating the possibility of freezing. A removable operating key is provided for
operation.
The PRIER Roof Mounting Bracket enables the hydrant to
be mounted to any structural member with rigid support, instead of to the skin of the building like competitive products.
Front Box View
This bracket requires only a single penetration point of 1
3/4", and can be mounted to concrete, wood, steel, I-beams,
truss, perlins or other structural members with standard
construction materials (Unistrut, all-thread, etc.).
9”
PRIER
7 1/4”
1 5/8”
With Integral P-004 Vacuum Breaker
and Dual Backflow Preventor
close-up view
Features
Rough-In Dimensions
Cross Section Top View with Box
Hydrant Length
C-734 3 1/4”
C-754 5 1/4”
Furnish and install Freezeless Model C-734 (or C-754 with Anti-Siphon Vacuum Breaker and Backflow Check Valve) Commercial Hot & Cold
Mixing Hydrant by PRIER. Hydrant shaft shall be brass with threaded and sealed connections. Hydrant shall have 3/4” hose connection with
freezeless water flow and self-draining functions with brass operating rod. Hydrant shall be approved under ASSE standards. Two operating
keys to be furnished with each hydrant. Hydrant insertion length to be * inches.
Optional: Furnish and install water box for each hydrant. Hydrant box shall be manufactured of solid cast brass with a polished brass or polished
nickel bronze finish. Access to the water box shall be provided by the same operating key as the freezeless hydrant. *4” to 24” in 2” increments.
Ordering
Specs
30
2
7
Application
Replacement Parts & Stems
6
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
31
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Mounts to any roof structural member (truss, I-beam, concrete roof, etc.)
Single hole penetration of 1 3/4"
Single person installation with standard tools
ASSE 1052 approved vacuum breaker
Freezeless anti-siphon hydrant is flush to the roof allowing hose to run in 360°
"Triple Seal" positive shut off system for drip-free shut off
Heavy duty brass construction
Self draining with 1/8" NPT drainage port
Repair can be easily accomplished at roof level
Designed to be installed with standard construction materials (Unistrut, all-thread, etc.)
3/4" garden hose threads standard; 1" threads optional
Includes operating key
Tremendous flow of 19 gallons per minute at 25 PSI
Adjustable bracket to accommodate roof angles up to 4/12
P-RH1
Length
H1- Flush Mount Roof Hydrant
H2- Post Mount Roof Hydrant
H3- Mild Climate Roof Hydrant
MB- Roof Hydrant Mounting Bracket
P-RH1-C
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
14
11
17
12
18
13
16
1
Part No.
Description
1
314-0021
Mounting Bracket
2
314-0022
Pipe Bracket
3
314-0023
Stand Off
4
314-0025
3/8" Lock Washer
5
324-1006
3/8" Flat Washer
6
314-0024
3/8" Shoulder Bolt
7
314-0027
3/8" Nut
8
314-0029
1/2" Flat Washer
9
314-0028
1/2" Bolt
10
314-0030
1/2" Hex Nut
11
C-108KT-808
Loose Key on Lanyard
12
300-6003
Valve Stem Cap
13
C-634KT-809
Worm Drive Assembly
14
C-634KT-808
Worm Sleeve Assembly
15
336-0001
O-Ring for Worm Sleeve
P-260KT-802
Stopper Assembly, Contains: 15, 16
17
Call PRIER
Stem Shaft
18
C-634KT-806
Vacuum Breaker Assembly
231-0803
3' Stem Assembly, 37 1/8" OAL
Contains: 14, 15, 16, 17
2
7 4
10
Side Hydrant View
3 5
8
6
9
Bottom Bracket View
P-RH2 Post Mount Roof Hydrant
With Integral P-004 Vacuum Breaker
and Dual Backflow Preventor
Commercial/Industrial
Freezeless
Anti-Siphon
Self Draining
The Roof Mounting Bracket enables the hydrant to be
mounted to any structural member with rigid support, instead of to the skin of the building like competitive products.
This bracket requires only a single penetration point of 1
3/4", and can be mounted to concrete, wood, steel, I-beams,
truss, perlins or other structural member with standard
construction materials (Unistrut, all-thread, etc.).
Front Bracket View
33.125"
Ordering
Furnish and install Model P-RH1 commercial key operated roof hydrant manufactured by PRIER Products, Inc. Hydrant shall be installed through
a 1 ¾” single penetration in the roof and mounted to the interior structure with the Universal Roof Hydrant Mounting Bracket (P-RMB) provided.
This bracket must be manufactured of heavy gauge powder coated steel and must allow for adjustment to meet roof angles up to 4/12. The
mounting bracket shall be mounted to concrete, a roofing truss, steel I-beam or interior wall with standard construction materials (all-thread,
Unistrut or other). The hydrant shall be flush mounted and have automatic draining capabilities with integral vacuum breaker/backflow preventer.
Hydrant shall be brass with freezeless water flow and self draining functions, one piece valve plunger, satin nickel finish and a triple-seal shut off
mechanism. Hydrant shall be capable of flowing a minimum of 15 gallons per minute at 25 PSI pressure change. The hydrant shall have a 3/4”
inlet and a 1/8” NPT drainage port to be connected to the drain waste line inside the structure. Hydrant shall be approved under the ASSE 1052
standard. The roof penetration is to be sealed by the roofing contractor in accordance with the roofing codes and conditions in their municipality.
•
•
•
•
PRIER's P-RH2 Post Mount Roof Hydrant provides a year
round source of water to roof surfaces in areas with freezing
temperatures. The hydrant stands 30" above the roof for
easy hose access. The hydrant valve is connected to the
supply piping in the heated portion of the structure, and is
self-draining, eliminating the possibility of freezing. This
valve has a built in vacuum breaker that allows the hydrant
to drain even if the hose is left on.
close-up view
Features
Rough-In Dimensions Specs
32
ID
Application
Replacement Parts
15
33
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Triple seal EPDM stopper for long wear life
Bracket mounts to any roof structural member (truss, I-beam, concrete roof, etc.)
Single hole penetration of 1 3/4"
Single person installation with standard tools
Hydrant has 3/4" inlet and multi-pass seat for high flow rates
Freezeless anti-siphon hydrant stands 30" above the roof for easy hose access
Heavy duty cast iron head and lockable lever handle
Bucket hook on spout
Designed to be installed with standard construction materials (Unistrut, all-thread, etc.)
Self draining with 1/8" NPT drainage port
Repair can be easily accomplished at roof level
Flow rate adjustment
ASSE 1052 approved vacuum breaker and backflow preventer
Adjustable bracket to accommodate roof angles up to 4/12
P-RH2
Length
H1- Flush Mount Roof Hydrant
H2- Post Mount Roof Hydrant
H3- Mild Climate Roof Hydrant
MB- Roof Hydrant Mounting Bracket
P-RH2-C
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
20
21
22
23
11
25
24
17
14
P-RH3 Mild Climate Roof Hydrant
1
12
15
2
28
27
29
4
3 5
10
8
6
With Integral P-004 Vacuum Breaker
and Dual Backflow Preventor
• Commercial/Industrial
• Anti-Siphon
• Wheel Handle Operated
7
26
ID
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Part No.
314-0021
314-0022
314-0023
314-0025
324-1006
314-0024
314-0027
314-0029
314-0028
314-0030
301-7003
301-7001
300-7001
315-0001
304-7001
27
9
PRIER’s P-RH3 Mild Climate Roof Hydrant provides a
year round source of water to roof surfaces in mild climate
areas. The hydrant consists of a commercial sill faucet
mounted onto a post for easy access. The hydrant valve
is connected to the supply piping in the heated portion of
the structure. This valve has a built in vacuum breaker that
meets ASSE 1052.
13
Description
Mounting Bracket
Pipe Bracket
Stand Off
3/8" Lock Washer
3/8" Flat Washer
3/8" Shoulder Bolt
3/8" Nut
1/2" Flat Washer
1/2" Bolt
1/2" Hex Nut
Handle (Cast Iron)
Hydrant Head (Cast Iron)
Seat (Cast Brass)
Thumb Screw (Zinc Plated Steel)
Draw Straps, Quantity 2 Required (Zinc Plated Steel)
Side Hydrant View
ID
16
17
18
19
20
21
22
23
24
25
26
27
28
29
Part No.
314-0008
314-0009
314-7001
314-7002
310-7005
336-0008
324-1003
310-7003
336-0001
310-7001
399-7001
324-0004
310-7006
399-0001
P-260KT-802
Bottom Bracket View
Description
Handle Bolt (Stainless Steel)
Nylon Hex Nut (Stainless Steel)
Adjustable Connector Nut (Zinc)
Upper Rod (Stainless Steel)
Valve Stem Cap (Brass)
Packing (EPDM)
Washer (Stainless Steel)
Seal Adapter (Brass)
O-Ring (EPDM)
Seal Sleeve (Brass)
Stopper (EPDM over Brass)
Spring Pin, Quantity 2 Required (Stainless Steel)
Hose Piece, 3/4" Hose Thread (Brass)
Check Valve (Plastic, Rubber, Stainless Steel)
Stopper Repair Kit, Contains: 24, 26, 27
Front Bracket View
close-up view
The Roof Mounting Bracket enables the hydrant to be
mounted to any structural member with rigid support, instead of to the skin of the building like competitive products.
This bracket requires only a single penetration point of 1
3/4", and can be mounted to concrete, wood, steel, I-beams,
truss, perlins or other structures with standard construction
materials (Unistrut, all-thread, etc.).
Features
47.00"
Furnish and install Model P-RH2 commercial Post Mount Roof Hydrant manufactured by PRIER Products, Inc. Hydrant shall be installed through a
1 ¾” single penetration in the roof and mounted to the interior structure with the Universal Roof Hydrant Mounting Bracket (P-RMB) provided. This
bracket must be manufactured of heavy gauge powder coated steel and must allow for adjustment to meet roof angles up to 4/12. The mounting
bracket shall be mounted to concrete, a roofing truss, steel I-beam or interior wall with standard construction materials (all-thread, Unistrut or
other). The hydrant shall have automatic draining capabilities with integral vacuum breaker/backflow preventer. Hydrant shall be cast iron with
freezeless water flow and self draining functions, one piece valve plunger and a triple-seal shut off mechanism. The hydrant shall have a 3/4”
inlet and a 1/8” NPT drainage port to be connected to the drain waste line inside the structure. Hydrant shall be approved under the ASSE 1052
standard. The roof penetration is to be sealed by the roofing contractor in accordance with the roofing codes and conditions in their municipality. Ordering
Rough-In Dimensions Specs
34
16
Application
Replacement Parts
18
19
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
35
•
•
•
•
•
•
•
•
•
•
•
•
•
Mounts to any roof structural member (truss, I-beam, concrete roof, etc.)
Single hole penetration of 1 3/4"
Single person installation with standard tools
ASSE 1052 approved vacuum breaker and backflow preventer
Commercial sill faucet on post for easy access
Valve has integral vacuum breaker and back flow preventer
Convertible to vandal proof loose key
Designed to be installed with standard construction materials (Unistrut, all-thread, etc.)
Repair can be easily accomplished at roof level
3/4" garden hose threads standard
Heavy duty brass construction with a satin nickel finish
Heavy duty galvanized pipe provides stability and is easily mounted to the roof mounting bracket
Adjustable bracket to accommodate roof angles up to 4/12
P-RH3
Length
H1- Flush Mount Roof Hydrant
H2- Post Mount Roof Hydrant
H3- Mild Climate Roof Hydrant
MB- Roof Hydrant Mounting Bracket
P-RH3-D
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
13
19
18
12
14
16
15
11
1
2
7 4
10
Side Hydrant View
3 5
8
6
9
Part No.
Description
1
314-0021
Mounting Bracket
2
314-0022
Pipe Bracket
3
314-0023
Stand Off
4
314-0025
3/8" Lock Washer
5
324-1006
3/8" Flat Washer
6
314-0024
3/8" Shoulder Bolt
7
314-0027
3/8" Nut
8
314-0029
1/2" Flat Washer
9
314-0028
1/2" Bolt
10
314-0030
1/2" Hex Nut
11
P-004CP
Vacuum Breaker Assembly
12
231-0001
Stem Assembly
13
C-134KT-805
Oval Handle and Screw Kit
14
C-135KT-802
Seat Washer Kit, 1/4" L Beveled
15
C-134KT-803
Stem Packing Kit
16
C-134KT-804
Loose Key Conversion Kit
17
390-1001
Stem Packing Only
18
C-108KT-808
Loose Key on Lanyard
19
310-1012
Valve Stem Cap
Bottom Bracket View
Front Bracket View
Mounts to any Roof Structure
Single Hole Penetration
Works with any 3/4" Post Hydrant
Powder Coated Steel Design
The Roof Mounting Bracket enables the hydrant to be
mounted to any structural member with rigid support, instead of to the skin of the building like competitive products.
This bracket requires only a single penetration point of 1
3/4", and can be mounted to concrete, wood, steel, I-beams,
truss, perlins or other structural members with standard
construction materials (unistrut, all-thread, or other).
47.00"
Ordering
Specs
Furnish and install Model P-RH3 Commercial Post Mount Roof Hydrant manufactured by PRIER Products, Inc. Hydrant shall be installed through
a 1 ¾” single penetration in the roof and mounted to the interior structure with the Universal Roof Hydrant Mounting Bracket (P-RMB) provided.
This bracket must be manufactured of heavy gauge powder coated steel and must allow for adjustment to meet roof angles up to 4/12. The
mounting bracket shall be mounted to concrete, a roofing truss, steel I-beam or interior wall with standard construction materials (all-thread,
Unistrut or other). The hydrant shall have an integral vacuum breaker/backflow preventer and be approved under the ASSE 1052 standard.
The hydrant shall have a 3/4” inlet and be made of brass with a satin nickel chromium finish. The roof penetration is to be sealed by the roofing
contractor in accordance with the roofing codes and conditions in their municipality.
•
•
•
•
PRIER’s P-RMB Universal Roof Hydrant Mounting Bracket
provides a means to attach any 3/4" post hydrant to a roof
structure, thus providing a simple water source on the roof
of a building. PRIER's Mounting Bracket is compatible
with PRIER's P-RH1, P-RH2 and P-RH3 Commercial Roof
Hydrants.
Features
Rough-In Dimensions
36
17
ID
Application
Replacement Parts & Stems
P-RMB Universal Mounting Bracket
37
•
•
•
•
•
•
•
•
•
•
Mounts to any roof structural member (truss, I-beam, concrete roof, etc.)
Compatible with PRIER's P-RH1, P-RH2 and P-RH3 roof hydrants
Single hole penetration of 1 3/4"
Single person installation with standard tools
Seals with standard roofing materials
Works with any 3/4" post hydrant
Designed to be installed with standard construction materials (Unistrut, all-thread, etc.)
Powder coated steel design
Adjustable to accommodate roof angles up to 4/12
Bracket and hydrant can be installed independently
P-RMB
Length
H1- Flush Mount Roof Hydrant
H2- Post Mount Roof Hydrant
H3- Mild Climate Roof Hydrant
MB- Roof Hydrant Mounting Bracket
P-RH1-C
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
Replacement Parts & Stems
Rough-In Dimensions
Specs
38
2
4
7
1
10
ID
Part No.
Description
1
314-0021
Mounting Bracket
2
314-0022
Pipe Bracket
3
314-0023
Stand Off
4
314-0025
3/8" Lock Washer
5
324-1006
3/8" Flat Washer
6
314-0024
3/8" Shoulder Bolt
7
314-0027
3/8" Nut
8
314-0029
1/2" Flat Washer
9
314-0028
1/2" Bolt
10
314-0030
1/2" Hex Nut
Bottom Bracket View
3
5
8
Page 40
Page 42
Page 44
Page 46
Page 48
P-650 Heavy Commercial Ground Hydrant
P-260 Freezeless Ground Hydrant
C-250 Heavy Pattern Freezeless Ground Hydrant
C-240 Freezeless Economy Ground Hydrant
YH Freezeless Ground Hydrant
6
9
Front Bracket View
Furnish and install Model P-RMB Universal Roof Hydrant Mounting Bracket manufactured by PRIER Products. Bracket must be manufactured of
heavy gauge powder coated steel. This bracket is to be installed inside the structure and must have a single penetration through the roof. This
bracket must allow for adjustment to meet roof angles up to 4/12. It also must connect to I-beams, steel, truss, wood or concrete with standard
construction materials. The roof penetration is to be sealed by the roofing contractor in accordance with roofing codes and conditions in their
municipality.
GROUND
HYDRANTS
39
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
Application
With Integral P-004 Vacuum Breaker
and Dual Backflow Preventor
•
•
•
•
•
Commercial/Industrial
Freezeless
Anti-Siphon
Backflow Check Valve
Self-Draining
Replacement Parts
P-650 Heavy Commercial Ground Hydrant
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
PRIER P-650 Heavy Commercial Ground Hydrant provides
a year round source of water to areas subject to freezing
temperatures. The hydrant is installed flush to surface,
eliminating interference with machinery or pedestrian traffic. Features
•
•
•
•
•
•
•
Heavy pattern standard hydrant for use with or without brass or satin nickel box
ASSE 1052 approved backflow preventor and vacuum breaker
Heavy duty galvanized piping, with options for all brass construction
Simple, solderless design with threaded and sealed joints for years of reliable operation
Repair can be easily accomplished at ground level
No special installation or service tools are required
Includes operating key
Ordering
Ground Hydrant Only
Optional Hydrant Box
P-650BX1
P-650N02
Hose Thread Outlet
0- ¾” Garden Hose
1- 1” Hose
Inlet
N- ¾” FPT
Length
1- 1’ Bury Depth
2- 2’ Bury Depth
3- 3’ Bury Depth
4- 4’ Bury Depth
5- 5’ Bury Depth
6- 6’ Bury Depth
1
2
4
7
8
3
6
Rough-In Dimensions
*shown with optional hydrant box
The hydrant valve is connected to the supply piping below
the freeze line, and is self draining, eliminating the possibility of freezing. An operating key is provided to prevent
unauthorized usage of the hydrant.
5
Side Hydrant View with Box
ID
Part No.
Description
1
C-108KT-808
Loose Key on Lanyard
2
300-6003
Valve Stem Cap
3
C-634KT-809
Worm Drive Assembly
4
C-634KT-808
Worm Sleeve Assembly
5
336-0001
O-Ring for Worm Sleeve
6
P-260KT-802
Stopper Assembly
7
Call PRIER
Stem Shaft
8
C-634KT-806
Vacuum Breaker Assembly
4-7
231-0801
Stem Assembly for 1’ P-650, 13 1/4” OAL
4-7
231-0802
Stem Assembly for 2’ P-650, 25 1/4” OAL
4-7
231-0803
Stem Assembly for 3’ P-650, 37 1/4” OAL
4-7
231-0804
Stem Assembly for 4’ P-650, 49 1/4” OAL
4-7
231-0805
Stem Assembly for 5’ P-650, 61 1/4” OAL
4-7
231-0806
Stem Assembly for 6’ P-650, 73 1/4” OAL
4-7
231-0807
Stem Assembly for 7’ P-650, 85 1/4” OAL
Top Box View
5.125”
5.125”
130
mm
130mm
2.5”
63.5mm
6.5”
165 mm
Hydrant
Length
6.0”
152 mm
Box Finish
1- Satin Nickel Plated
2- Rough Brass
1/8” Female NPT
3/4” 19mm Female NPT
40
P-650-E
Specs
*Note: Optional box is rated at light duty.
*Note: For installations with hydrant box, both freezeless hydrant and box need to be ordered.
41
Furnish and install PRIER’s P-650 Heavy Commercial key operated ground hydrant manufactured by PRIER Products, Inc. Hydrant shall be
approved to ASSE 1052 and UPC standards and shall be installed with a water box. Hydrant box shall be manufactured of solid cast brass
with a rough brass or satin nickel (choose one) finish. Access to the water box shall be provided by the same operating key as the hydrant. The
hydrant must be installed flush to surface to allow machinery and pedestrian traffic without damage to hydrant. Hydrant shaft shall be heavy
duty piping with threaded and sealed connections. Hydrant shall have 3/4” or 1” (choose one) hose connection with freezeless water flow and
self-draining functions with solid operating rod. Hydrant insertion depth to be * feet. *1’ to 7’ in 1’ increments.
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
Application
•
•
•
•
•
•
Freezeless
Anti-Siphon
Self-Draining
Variable Flow
Lockable
Triple Seal Stopper
PRIER’s P-260 Freezeless Ground Hydrant provides a
year round source of water to areas subject to freezing
temperatures. The P-260 comes with a built in backflow
preventer and flow control lock.
close-up view
Replacement Parts
P-260 Freezeless Ground Hydrant
Features
Ordering
42
1
5
9
19
10
11
12
13
14
15
17
3
P-260-3
1- 1’ Bury Depth
2- 2’ Bury Depth
3- 3’ Bury Depth
4- 4’ Bury Depth
5- 5’ Bury Depth
6- 6’ Bury Depth
7- 7’ Bury Depth
8- 8’ Bury Depth
17
Part No.
Size
Overall Length
Weight Ea.
P-260-1
1’ Bury
44”
13 lbs
P-260-2
2’ Bury
56”
15 lbs
P-260-3
3’ Bury
68”
17 lbs
P-260-4
4’ Bury
80”
19 lbs
P-260-5
5’ Bury
92”
21 lbs
P-260-6
6’ Bury
104”
23 lbs
2
18
Maintained at ground level without removing heavy duty cast iron head and lever handle
Flow control lock for water flow adjustment
Available in 8 standard lengths, longer lengths available by request
3/4” FPT inlet connection
Built in backflow preventer, self-lubricating EPDM seals, and optional ASSE 1052 vacuum breaker
Stainless steel upper rod for long wear life
Multi-pass seat for high flow rates
Heavy duty galvanized steel pipe body and operating stem
Optional brass pipe and operating rod for harsh water environments
Solid brass garden hose adapter and triple seal stopper for long wear life
Bucket hook on spout
Made in the USA
Bury Depth
4
8
Additionally, the P-260 is well known for its ease of use and
maintenance. The brass stem cap design allows the stem
to be removed and a stopper replaced without removing
the cast iron head from the hydrant, significantly simplifying
the maintenance of this type of product.
•
•
•
•
•
•
•
•
•
•
•
•
7
6
16
P-260-G
43
ID
Part No
Description
1
301-7003
Handle (Cast Iron)
2
301-7001
Hydrant Head (Cast Iron)
3
300-7001
Seat (Cast Brass)
4
315-0001
Thumb Screw (Zinc Plated Steel)
5
304-7001
Draw Straps, Quantity 2 Required
(Zinc Plated Steel)
6
314-0011
Handle Bolt (Stainless Steel)
7
314-0009
Hex Nut (Stainless Steel with Nylon)
8
314-7001
Adjustable Connector Nut (Zinc)
9
314-7002
Upper Rod (Stainless Steel)
10
310-7005
Valve Stem Cap, Hand Tighten Only
(Brass)
11
336-0008
Packing (EPDM)
12
324-1003
Washer (Stainless Steel)
13
310-7003
Seal Adapter (Brass)
14
336-0001
O-Ring (EPDM)
15
310-7001
Seal Sleeve (Brass)
16
399-7001
Stopper (EPDM over Brass)
17
324-0004
Spring Pin (Stainless Steel)
18
310-7006
Hose Piece, ¾” Hose Thread (Brass)
19
399-0001
Check Valve (Plastic, Rubber and
Stainless Steel)
P-260KT-802
Stopper Repair Kit
Contains: 14, 16, 17
P-260KT-807
Overhaul Kit, Contains:
5 (2ea), 8, 10, 11, 12, 14, 16, 17 (2ea)
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
Application
• Freezeless
• Lockable
• Variable Flow
• Time Tested
PRIER’s C-250 Freezeless Ground Hydrant provides a
year round source of water to areas subject to freezing
temperatures. The hydrant valve is connected to the supply
piping below the frost line, and since it drains automatically,
it is not subject to freezing.
close-up view
Replacement Parts
C-250 Freezeless Ground Hydrant
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
1
3
13
14
12
2
7
4
5
6
The PRIER C-250 is a time tested design with a cam type
operation lever control that provides full variable flow. It
is available from stock in bury depths from 1’ to 6’, longer
sizes are available upon request.
Features
Ordering
44
•
•
•
•
•
•
•
•
•
8
Solid, extra thick walled head casting, reduced breakage
3/4” FPT inlet connection
Solid brass hose adapter
Cam type operating lever control provides full variable flow
High quality steel drawstraps that eliminate side pull of operating rod
Pivot connector has double nut connection, no set screws to rust in place
Galvanized outer pipe has no exposed threads, providing simple, in field repair
Stainless steel operating rod provides the longest operating life
Simple repair can be done at ground level
C-250-3
Bury Depth
1- 1’ Bury Depth
2- 2’ Bury Depth
3- 3’ Bury Depth
4- 4’ Bury Depth
5- 5’ Bury Depth
6- 6’ Bury Depth
Part No.
Size
Overall Length
Weight Ea.
C-250-1
1’ Bury
46”
13 lbs
C-250-2
2’ Bury
58”
15 lbs
C-250-3
3’ Bury
70”
17 lbs
C-250-4
4’ Bury
82”
19 lbs
C-250-5
5’ Bury
94”
21 lbs
C-250-6
6’ Bury
106”
23 lbs
C-240-G
45
9
10
11
ID
Part No.
Description
1
324-1004
Draw Straps, Quantity 2 Required
2
232-0001
Pivot Connector and Nuts
3
314-0002
Rod (Stainless Steel)
4
310-0010
Packing Nut
5
346-0001
Valve Stem Packing
6
310-0014
Rod Connector
7
314-0003
7/16" Extension Rod
8
310-0011
Valve Body for C-250
9
340-0002
Cup Leathers, Quantity 2 Required
10
936-0001
3/8" L Beveled Bibb Washer
11
C-250-021
Plunger for C-250
12
310-0027
Hose Thread Adapter for C-240, C-250
13
301-0004
Head for C-250 (Cast Iron)
14
301-0001
Handle for C-250 (Cast Iron)
C-250-801
Overhaul Kit, Contains 1, 2, 4, 5, 11
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
Replacement Parts
C-240 Freezeless Ground Hydrant
Application
• Freezeless
• Lockable
• Variable Flow
• Time Tested
Features
Ordering
4- 4’ Bury Depth
5- 5’ Bury Depth
6- 6’ Bury Depth
Part No.
Size
Overall Length
Weight Ea.
C-240-1
1’ Bury
45”
11 lbs
C-240-2
2’ Bury
57”
13 lbs
C-240-3
3’ Bury
69”
15 lbs
C-240-4
4’ Bury
81”
17 lbs
C-240-5
5’ Bury
93”
19 lbs
C-240-6
6’ Bury
105”
21 lbs
Description
1
324-1004
Draw Straps, Quantity 2 Required
2
232-0001
Pivot Connector and Nuts
3
314-0002
Rod (Stainless Steel)
4
310-0010
Packing Nut
5
346-0001
Valve Stem Packing
6
310-0014
Rod Connector
4
7
314-0003
7/16” Extension Rod
5
8
300-0027
Valve Body for C-240
9
C-240-021
Plunger for C-240
10
310-0027
Hose Thread Adapter for C-240, C-250
11
301-0003
Head for C-240 (Cast Iron)
12
301-0002
Handle for C-240 (Cast Iron)
C-240-801
Overhaul Kit, Contains: 1, 2, 4, 5, 9
2
11
12
10
7
9
C-240-3
1- 1’ Bury Depth
2- 2’ Bury Depth
3- 3’ Bury Depth
Part No.
8
3/4” FPT inlet connection
Solid brass hose adapter
Cam type operating lever control provides full variable flow
High quality steel drawstraps that eliminate side pull of operating rod
Pivot connector has double nut connection, no set screws to rust in place
Galvanized outer pipe has no exposed threads, providing simple, in field repair
Stainless steel operating rod provides the longest operating life
Dual bypass high flow valve body
One piece plunger design
Simple repair can be done at ground level
Bury Depth
ID
6
The PRIER C-240 is a time tested design, with many of the
quality features of PRIER’s C-250 premium quality freezeless ground hydrant. It is available from stock in bury depths
from 1’ to 6’, longer sizes are available upon request.
46
3
PRIER’s C-240 Freezeless Ground Hydrant provides a
year round source of water to areas subject to freezing
temperatures. The hydrant valve is connected to the supply
piping below the frost line, and since it drains automatically,
it is not subject to freezing.
close-up view
•
•
•
•
•
•
•
•
•
•
1
C-240-G
47
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
Application
Mansfield Style “Formerly Red”
YH Series
• Freezeless
• Lockable
• Variable Flow
• Lead Free
PRIER’s YH Series Economy Freezeless Ground Hydrant
provides a year round source of water to areas subject to
freezing temperatures. The hydrant valve is connected to
the supply piping below the frost line, and since it drains
automatically, it is not subject to freezing.
close-up view
Replacement Parts
YH Freezeless Ground Hydrant
3
1
4
2
7
10
5
6
The YH Series Ground Hydrant contains a multiple bypass
high flow valve body and a one piece plunger design. It is
available from stock in bury depths from 1’ to 6’ and it meets
the 2014 Safe Drinking Water Act.
Features
Ordering
48
•
•
•
•
•
•
•
•
9
3/4” FPT inlet connection
Heavy duty cast iron head and handle
Solid brass hose adapter
Galvanized outer pipe has no exposed threads, providing simple, in field repair
Multiple bypass high flow valve body
One piece plunger design
Simple repair can be done at ground level
YH model meets the 2014 Safe Drinking Water Act
8
YH-3
Bury Depth
1- 1’ Bury Depth
2- 2’ Bury Depth
3- 3’ Bury Depth
4- 4’ Bury Depth
5- 5’ Bury Depth
6- 6’ Bury Depth
Part No.
Size
Overall Length
Weight Ea.
YH-1
1’ Bury
39”
12 lbs
YH-2
2’ Bury
51”
15 lbs
YH-3
3’ Bury
63”
17 lbs
YH-4
4’ Bury
75”
20 lbs
YH-5
5’ Bury
87”
22 lbs
YH-6
6’ Bury
99”
24 lbs
YH-F
49
ID
Part No.
Description
1
324-3002
Draw Straps, Quantity 2 Required
2
310-3028
Pivot Connector
3
324-3003
Fulcrum Bolt and Nut
4
324-3004
Square Head Set Screw
5
310-3029
Packing Nut
6
336-3004
O-Ring Seal
7
310-3030
Hose Thread Adapter
8
300-0024
Valve Body
9
399-3004
Plunger
10
301-3001
Operating Handle
630-9002
Repair Kit, Contains: 1, 2, 3, 4, 5, 6, 9
C-135 Heavy Pattern Angle Sill Faucets
C-138 Heavy Pattern Hose Bibbs
C-155 Anti-Siphon Angle Sill Faucets
C-165 Double Check Anti-Siphon Angle Sill Faucets
C-158 Anti-Siphon Hose Bibbs
C-168 Double Check Anti-Siphon Hose Bibbs
P-002 Vacuum Breakers
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
Heavy Pattern Angle Sill Faucets
C-135/C-235, C-137/C-237 Styles
Application
Page 51
Page 52
Page 53
Page 55
Page 57
Page 58
Page 59
• Heavy Pattern
• Solid Cast Brass
• Handle or Loose Key
Option
• Satin Nickel or Polished
Chrome Plated
PRIER Heavy Pattern Angle Sill Faucets are designed for areas that require water service, but are not subject to
freezing temperatures. Typical installations include basements, garages and for outdoor installations in mild climates. The heavy pattern design with solid brass stem assures years of reliable service with minimal maintenance.
Features
•
•
•
•
•
•
•
•
•
Heavy pattern cast brass construction
Solid cast brass mounting flange with enclosed screw holes
Available either satin nickel plated or polished chrome finish
Solid brass operating stem
Cast aluminum handle assembly with stainless steel mounting screw
AFG teflon with graphite packing
Female iron pipe inlet connections, sweat connection on C-137
3/4” garden hose connection outlet
Solid brass stem with ACME threads and 1/4” L bibb washer
Ordering
C-135NP.50
FAUCETS
Replacement Parts
ANGLE SILL
51
Operator
1- Handle
2- Loose Key
Inlet Type
5- FPT Inlet
7- SWT Inlet
1
3
6
2
4
5
7
8
Inlet Size
50- ½”
75- ¾”
Finish
NP- Satin Nickel Plated
CP- Polished Chrome Plated*
*C-137 not available in polished chrome finish
ID
Part No.
Description
1
231-0001
Stem Assembly, Rod (Brass)
2
300-1008
Valve Stem Cap (Nickel Plated)
2
300-1013
Valve Stem Cap (Polished Chrome)
3
C-134KT-805
Oval Handle and Screw Kit (Aluminum)
3
C-135KT-805
Oval Handle and Screw Kit (Polished Chrome)
4
C-135KT-802
Seat Washer Kit, 1/4” Beveled
5
C-134KT-803
Stem Packing Kit
6
390-1001
Packing Only
7
C-108KT-808
Loose Key on Lanyard
8
310-1015
Extended Valve Stem Cap (Nickel Plated)
8
310-1019
Extended Valve Stem Cap (Polished Chrome)
C-134KT-804
Loose Key Conversion Kit, Contains: 5, 7, 8
C-135-G
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
Heavy Pattern Hose Bibbs
C-138ST
C-238
• Heavy Pattern
• Solid Cast Brass
• Satin Nickel Chromium
Finish
• Stuffing Box Design
Available
C-138NP.50
1- Handle
2- Loose Key
3
8
7
ID
Part No.
Description
1, 5
231-0001
Stem Assembly (C-138)
4
2, 5
231-0002
Stem Assembly (C-138ST)
3
C-138KT-801
T-Handle and Screw Kit
6
4
310-1012
Packing Nut (C-138)
5
C-135KT-802
Seat Washer Replacement Kit
6
C-134KT-803
Packing Kit (C-138)
6, 7, 8 C-134KT-804
2
1
5
Ordering
Replacement Parts
9
5
52
NP- Nickel Chrome Plated
ST- Nickel Chrome Plated, Stuffing Box Packing
3
10
50- ½”
75- ¾”
Finish
Operator
12
11
Inlet Size
C-108KT-808
Loose Key on Lanyard
9
390-0001
Packing Only
10
310-0005
Packing Nut (C-138ST)
11
393-0001
Stuffing Box Packing (C-138ST)
12
310-0006
Stuffing Box (C-138ST)
• Optional Hydrant Box
•
•
•
•
•
•
•
•
•
C-355
Angle Sill Faucet Only
C-155NP.50
Operator
Inlet Type
5- FPT Inlet
7- SWT Inlet
Optional Hydrant Box
Inlet Size
50- ½”
75- ¾”
Finish
NP- Satin Nickel Plated
CP- Polished Chrome Plated*
*C-157, C-257 and C-357 not available
in polished chrome finish
C-155BX1
Box Finish
1- Satin Nickel Plated
2- Rough Brass
*PLEASE NOTE: C-157, C-257 and C-357 made for ½” or ¾” sweat
connections with M Copper only.
C-155
C-138-F
C-255
Heavy pattern cast brass construction with solid cast brass mounting flange with enclosed screw holes
Optional heavy patterned casted brass valve box in satin nickel or brass finish
Satin nickel plated or polished chrome body
Powder coated non-ferrous metal handle or operating key on loose key vandalproof sill faucets
Stainless steel seat washer screw and handle screw
Full circle ACME threads on stem assembly with standard 1/4” L size seat washer
Lock shield cap
AFG teflon with graphite packing
P-002 vacuum breaker backflow check valve approved under ASSE 1011
1- Handle
2- Loose Key
3- Handle & Loose Key
Loose Key Conversion Kit
8
• Backflow Check Valve
PRIER’s anti-siphon angle sill faucets are designed for areas that require water service with an anti-siphon backflow check valve connection, but are not subject to freezing temperatures. Typical installations include outdoor
connections in mild climates or any indoor installation for residential, commercial, institutional and industrial
applications. The heavy pattern design with solid brass stem assures years of reliable service with minimal
maintenance. The faucets also have a powder coated non-ferrous metal handle or operating key on loose key
vandlaproof sill faucets. An optional valve box is available in either satin nickel or brass finish.
Features
Features Ordering
Heavy pattern cast brass construction
Satin nickel chromium finish
Solid brass operating stem
Inlet available 1/2” MPT x 1/2” female sweat or 3/4” MPT x 1/2” female sweat
3/4” garden hose connection outlet
C-238 shipped with operating key
• Commercial
• Anti-Siphon
C-155
The PRIER C-138 Heavy Pattern Hose Bibbs are for installation in non-freezing areas such as basements,
garages and for outdoor installations in mild climates. The heavy pattern design with solid brass stem assures
years of reliable service with minimal maintenance. Stuffing box design is available for additional protection.
•
•
•
•
•
•
With Integral P-002 Vacuum Breaker
Application
Application
C-138
Anti-Siphon Angle Sill Faucets
53
C-255
C-355
C-157
C-155-M
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
2
Description
1
231-0001
Stem Assembly (Brass) Rod
2
C-135KT-802
1/4” Beveled Seat Washer Kit
3
C-134KT-805
Handle and Screw Kit
(Aluminum Lacquered Green)
C-135KT-805
Handle and Screw Kit
(Polished Chrome Plated Aluminum)
300-1008
Valve Stem Cap (Nickel Plated)
300-1013
Valve Stem Cap (Polished Chrome Plated)
5
C-134KT-803
Stem Packing Kit
6
390-1001
Packing Only
7
C-108KT-808
Loose Key on Lanyard
8
310-1015
Extended Valve Stem Cap (Nickel Plated)
310-1019
Extended Valve Stem Cap
(Polished Chrome Plated)
C-434KT-906
Vacuum Breaker Replacement Kit
C-134KT-804
Loose Key Conversion Kit, Contains: 5, 7, 8
4
4
6
9
5
3
9
7
Anti-Siphon Angle Sill Faucets
With Integral P-004 Double Check Vacuum Breaker
•
•
•
•
C-165
C-265
Commercial
Anti-Siphon
Backflow Check Valve
Optional Hydrant Box
C-365
PRIER’s double check anti-siphon angle sill faucets are designed for areas that require water service with an
anti-siphon backflow check valve connection, but are not subject to freezing temperatures. Typical installations
include outdoor connections in mild climates or any indoor installation for residential, commercial, institutional
and industrial applications. The heavy pattern design with solid brass stem assures years of reliable service
with minimal maintenance. The faucets also have a powder coated non-ferrous metal handle or operating key
on loose key vandlaproof sill faucets. An optional valve box is available in either satin nickel or brass finish.
Features
Part No.
Application
Replacement Parts
1
ID
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
8
•
•
•
•
•
•
•
•
•
Heavy pattern cast brass construction with solid cast brass mounting flange with enclosed screw holes
Optional heavy patterned casted brass valve box in satin nickel or brass finish
Satin nickel plated or polished chrome body
Powder coated non-ferrous metal handle or operating key on loose key vandalproof sill faucets
Stainless steel seat washer screw and handle screw
Full circle ACME threads on stem assembly with standard 1/4” L size seat washer
Lock shield cap
AFG teflon with graphite packing
P-004 vacuum breaker backflow double check valve approved under ASSE 1052
Ordering
Angle Sill Faucet Only
C-165NP.50
Operator
1- Handle
2- Loose Key
3- Handle & Loose Key
Inlet Type
5- FPT Inlet
7- SWT Inlet
Optional Hydrant Box
Inlet Size
50- ½”
75- ¾”
Finish
NP- Satin Nickel Plated
CP- Polished Chrome Plated*
*C-167, C-267 and C-367 not available
in polished chrome finish
C-155BX1
Box Finish
1- Satin Nickel Plated
2- Rough Brass
*PLEASE NOTE: C-167, C-267 and C-367 made for ½” or ¾” sweat
connections with M Copper only.
C-165
54
55
C-265
C-365
C-167
C-165-A
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
2
Part No.
Description
1
231-0001
Stem Assembly (Brass) Rod
2
C-135KT-802
1/4” Beveled Seat Washer Kit
3
C-134KT-805
Handle and Screw Kit
(Aluminum Lacquered Green)
C-135KT-805
Handle and Screw Kit
(Polished Chrome Plated Aluminum)
300-1008
Valve Stem Cap (Nickel Plated)
300-1013
Valve Stem Cap (Polished Chrome Plated)
5
C-134KT-803
Stem Packing Kit
6
390-1001
Packing Only
7
C-108KT-808
Loose Key on Lanyard
8
310-1015
Extended Valve Stem Cap (Nickel Plated)
310-1019
Extended Valve Stem Cap
(Polished Chrome Plated)
337-0002
Check Spider (Acetal)
4
4
9
10
6
11
5
12
3
9
8
Stepped Washer (Silicone)
11 310-0018
Vacuum Breaker Hose Piece
12 399-0001
Check Valve (Neoperl)
C-434KT-906
Vacuum Breaker Assembly, Contains: 9, 10, 11
C-134KT-804
Loose Key Conversion Kit, Contains: 5, 7, 8
With Integral P-002 Vacuum Breaker
C-158
Commercial
Anti-Siphon
Backflow Check Valve
Solid Cast Brass
C-258
•
•
•
•
•
•
•
•
Heavy pattern cast brass construction
Satin nickel chromium finish
Vandalproof lock shield cap on C-258 model
Diecast aluminum t-handle or operating key on loose key hose bibbs
Stainless steel seat washer screw and handle screw
Full circle ACME threads on stem assembly with standard 1/4” L size seat washer
AFG teflon with graphite packing
P-002 vacuum breaker backflow check valve approved under ASSE 1011 and CSA B64.2
C-158NP.50
3
5
14
16
7
8
13
15
4
1
17
2 9
11
12
57
NP- Satin Nickel Plated
ST- Nickel Chrome Plated, Stuffing Box Packing
1- Handle
2- Loose Key
6
Inlet Size
50- ½”
75- ¾”
Finish
Operator
10
56
•
•
•
•
PRIER Anti-Siphon Hose Bibbs are designed for areas that require water service with an anti-siphon backflow
check valve connection, but are not subject to freezing temperatures. Typical installations include outdoor connections in mild climates or any indoor installation for residential, commercial, institutional and industrial applications.
Ordering Replacement Parts
7
10 336-0006
Anti-Siphon Hose Bibbs
Features
ID
Application
Replacement Parts
1
18
ID
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Part No.
231-0001
C-134KT-802
C-138KT-801
310-1012
C-134KT-803
390-1001
C-108KT-808
310-1019
310-0023
337-0002
336-0006
310-0018
310-0006
393-0001
310-0005
390-0001
231-0002
P-002CP
C-434KT-906
C-134KT-804
Description
Stem Assembly, Rod (Brass)
Seat Washer Kit, 1/4” Beveled
T-Handle and Screw Kit
Valve Stem Cap
Stem Packing Kit
Packing Only
Loose Key on Lanyard
Extended Valve Stem Cap (Polished Chrome)
P-002 Adapter
Check Spider (Acetal)
Stepped Washer (Silicone)
Vacuum Breaker Hose Piece
Stuffing Box (C-158ST)
Stuffing Box Packing (C-158ST)
Packing Nut (C-158ST)
Packing Spacer (C-158ST)
Stem Assembly (C-158ST)
Hose End Vacuum Breaker
Vacuum Breaker Assembly, Contains, 10, 11, 12
Loose Key Conversion Kit, Contains: 5, 7, 8
C-158-C
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
Anti-Siphon Hose Bibbs
Application
With Integral P-002 Double Check Vacuum Breaker
•
•
•
•
C-168
P-002 Vacuum Breaker
• Anti-Siphon
• Backflow Check Valve
• Breakaway Set Screw
Commercial
Anti-Siphon
Backflow Check Valve
Solid Cast Brass
C-268
PRIER double check anti-siphon hose bibbs are designed for areas that require water with an anti-siphon backflow
check valve connection, but are not subject to freezing temperatures. Typical installations include outdoor connections in mild climates or any indoor installation for residential, commercial, institutional and industrial applications.
Features
•
•
•
•
•
•
•
•
Heavy pattern cast brass construction
Satin nickel chromium finish
Vandalproof lock shield cap on C-268 model
Diecast aluminum t-handle or operating key on loose key hose bibbs
Stainless steel seat washer screw and handle screw
Full circle ACME threads on stem assembly with standard 1/4” L size seat washer
AFG teflon with graphite packing
P-004 vacuum breaker backflow double check valve approved under ASSE 1052 and CSA B64.2
Ordering Replacement Parts
C-168NP.50
1- Handle
2- Loose Key
6
8
16
17
4
1
2
9
18
10
11
12
13
58
14
15
7
Carton Qty
Carton Wt
P-002CP
ASSE 1011 Anti-Siphon VB and Backflow Check Valve (Chrome)
36
10 lbs
P-002NP
ASSE 1011 Anti-Siphon VB and Backflow Check Valve (Nickel)
36
10 lbs
P-003 Vacuum Breaker
•
•
•
•
Self-Draining
Anti-Siphon
Backflow Check Valve
Breakaway Set Screw
Inlet Size
NP- Satin Nickel Plated
ST- Nickel Chrome Plated, Stuffing Box Packing
3
5
Description
50- ½”
75- ¾”
Finish
Operator
Part No.
19
ID
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
Part No.
231-0001
C-134KT-802
C-138KT-801
310-1012
C-134KT-803
390-1001
C-108KT-808
310-1019
310-0023
337-0002
336-0006
310-0018
399-0001
310-0006
393-0001
310-0005
390-0001
231-0002
P-004CP
C-434KT-906
C-134KT-804
Description
Stem Assembly, Rod (Brass)
Seat Washer Kit, 1/4” Beveled
T-Handle and Screw Kit
Valve Stem Cap
Stem Packing Kit
Packing Only
Loose Key on Lanyard
Extended Valve Stem Cap (Polished Chrome)
P-004 Adapter
Check Spider (Acetal)
Stepped Washer (Silicone)
Vacuum Breaker Hose Piece
Check Valve (Neoperl)
Stuffing Box (C-168ST)
Stuffing Box Packing (C-168ST)
Packing Nut (C-168ST)
Packing Spacer (C-168ST)
Stem Assembly (C-168ST)
Hose End Vacuum Breaker
Vacuum Breaker Assembly, Contains, 10, 11, 12
Loose Key Conversion Kit, Contains: 5, 7, 8
C-168-A
Part No.
Description
P-003CP
ASSE 1011 Self Draining, Anti-Siphon VB and Backflow Check Valve (Chrome)
Carton Qty
Carton Wt
36
12 lbs
P-004 Double Check Vacuum Breaker
•
•
•
•
59
Part No.
Description
P-004CP
P-004NP
Anti-Siphon
Double Check
Dual Backflow Check Valves
Breakaway Set Screw
Carton Qty
Carton Wt
ASSE 1052 VB & Backflow Check Valve-Double Check (Chrome)
36
10 lbs
ASSE 1052 VB and Backflow Check Valve-Double Check (Nickel)
36
10 lbs
P-002-H
Page 61
Page 62
Page 63
Page 64
20 Series Heavy Pattern Globe Valves
34 Series Heavy Pattern Brass Sillcocks
44 Series Heavy Pattern Brass Hose Bibbs
526 Series Heavy Pattern Boiler Drains
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
Heavy Pattern Globe Valves
Application
Lead Free Mansfield Style 20 and 22 Series
Features
Ordering
BRASS
Rough-In Dimensions
PLUMBING
61
•
•
•
•
•
•
•
•
•
•
•
•
Lead free
Heavy pattern casted red brass construction
Solid brass operating stem
Large unobstructed waterways for greater flow rates
Cast metal handle assembly with brass mounting screw
Red, blue or green operating handle options
Packing nut design for years of reliable life
AFG teflon with graphite packing
Female and SWT iron pipe inlet connections
Solid brass fast-travel stem with ACME threads
Stop and waste option available
Each valve individually air-tested
Replacement Parts
1
20.40-B
Waste Option
0- No Waste Option
2- Stop & Waste Design
Handle Option
Inlet
3
None- Red
B- Blue
G- PRIER Green
40- ½” FIP
41- ½” SWT
60- ¾” FIP
61- ¾” SWT­
4
2
B
5
C
A
D
E
Part No.
A
B
C (Closed)
C (Open)
D
E
20.40
1/2” FIP
1.9”
2.6”
3”
1.3”
2.2”
20.41
1/2” SWT
1.9”
2.6”
2.9”
0.8”
2.2”
20.60
3/4” FIP
1.9”
2.9”
3.2”
1.4”
2.3”
20.61
3/4” SWT
1.9”
2.7”
3”
1”
2.6”
22.40
1/2” FIP
1.9”
2.7”
3”
1.3”
2.2”
22.41
1/2” SWT
1.9”
2.5”
2.9”
0.8”
2.2”
22.60
3/4” FIP
1.9”
2.9”
3.2”
1.4”
2.3”
22.61
3/4” SWT
1.9”
2.8”
3”
1”
2.6
ID
Part No.
Description
1
630-0045
Handle and Screw Kit
2
630-0047
Bibb Washer and Screw Kit
3
339-3003
Packing Only
4
231-3101
Stem Assembly Complete
5
22.00-KT1
Cap and Seal for Stop and Waste
630-0043
Service Kit for Stop Valves,
Contains: 1, 2, 3
20-D
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
Heavy Pattern Brass Sillcocks
Application
Application
Mansfield Style 34 Series
Heavy pattern casted red brass construction
•
Solid brass operating stem
•
Large unobstructed waterways for greater flow rates
•
Cast metal handle assembly with brass mounting screw
•
Replacement Parts
Features
Features
•
Mansfield Style 44 Series
•
Heavy pattern casted red brass construction
•
Solid brass operating stem
•
Large unobstructed waterways for greater flow rates
Red, blue or green operating handle options
•
Cast metal handle assembly with brass mounting screw
•
Packing nut design for years of reliable life
•
Red, blue or green operating handle options
•
AFG teflon with graphite packing
•
Packing nut design for years of reliable life
•
Available with integral vacuum breaker
•
AFG teflon with graphite packing
•
Female and SWT iron pipe inlet connections
•
Female and SWT iron pipe inlet connections
•
3/4” garden hose connection outlet
•
3/4” garden hose connection outlet
•
Solid brass fast-travel stem with ACME threads
•
Each valve individually air-tested
•
Solid brass fast-travel stem with ACME threads
•
Each valve individually air-tested
1
3
4
2
Ordering
Ordering
34.40VB-B
Inlet
40- ½” FIP
60- ¾” FIP
67- ½” Copper Inside VB- Integral Vacuum Breaker
or ¾” Type M Copper
Outside
62
Heavy Pattern Brass Hose Bibbs
Handle Option
None- Red
B- Blue
G- PRIER Green
ID
Part No.
Description
1
630-0045
Handle and Screw Kit
2
630-0047
Bibb Washer and Screw Kit
3
339-3003
Packing Only
4
231-3101
Stem Assembly Complete
630-0043
Service Kit for Brass Sillcocks,
Contains: 1, 2, 3
44.42-B
Inlet
42- ½” MIP x ½” SWT
62- ¾” MIP
34-D
63
Handle Option
None- Red
B- Blue
G- PRIER Green
Replacement Parts
1
3
4
2
ID
Part No.
Description
1
630-0046
Handle and Screw Kit
2
630-0047
Bibb Washer and Screw Kit
3
339-3003
Packing Only
4
231-3101
Stem Assembly Complete
630-0044
Service Kit for Hose Bibbs,
Contains: 1, 2, 3
44-E
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
Heavy Pattern Boiler Drains
Application
Mansfield Style 526 Series
Features
•
Heavy pattern casted red brass construction
•
Solid brass operating stem
•
Large unobstructed waterways for greater flow rates
•
Cast metal handle assembly with brass mounting screw
•
Red, blue or green operating handle options
•
Packing nut design for years of reliable life
•
AFG teflon with graphite packing
•
Female and SWT iron pipe inlet connections
•
3/4” garden hose connection outlet
•
Solid brass fast-travel stem with ACME threads
•
Each valve individually air-tested
Ordering
40- ½” FIP
42- ½” MIP x ½” SWT
43- ½” Compression
62- ¾” MIP
Handle Option
None- Red
B- Blue
G- PRIER Green
A-110 Cast Iron Shower Drain
B-102 Cast Iron Shower Drain With Trap
B-110 Cast Iron Shower Drain
C-121 Cast Brass Closet Floor Flange
C-200 Cast Brass Cleanout Plug
C-212 Brass Sinkwaste
C-330 Floor and Wall Covers
C-342 Cast Brass Backwater Valve
C-162 4-Way Loose Key Wrench
C-10 Series Wheel Handle
P-310 Cast Brass Shower Drain
P-312 Angle Style Brass Shower Drain
P-325 Floor Drain Covers
1
3
4
2
526.40-B
Inlet
64
Replacement Parts
Page 66
Page 67
Page 68
Page 69
Page 70
Page 71
Page 72
Page 73
Page 73
Page 73
Page 74
Page 75
Page 76
ID
Part No.
Description
1
630-0045
Handle and Screw Kit
2
630-0047
Bibb Washer and Screw Kit
3
339-3003
Packing Only
4
231-3101
Stem Assembly Complete
630-0043
Service Kit for Boiler Drains,
Contains: 1, 2, 3
526-E
DRAINAGE
PRODUCTS
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
B-102 Series Cast Iron Shower Drain With Trap
A-110 Series Cast Iron Shower Drain
• 4 1/2” Cast Brass Strainer
• Threaded Cast Iron
Clamping Ring
Application
Application
• Cast Iron Body
With P-315 Brass Strainer
With P-315 Brass Strainer
• Cast Iron Body With Trap
• 4 1/2” Cast Brass Strainer
• 2” FPT Inlet
• Bolt-Down Cast Iron
Clamping Ring
• Available with 2” FPT or
2” Inside Caulk Inlet
Ordering
Ordering
Inlet
Strainer
012- Chrome Plated Brass
CL- 2” Caulk Type
013- Polished Brass
FE- 2” Female Pipe Thread
7”
5”
Drainage
Slots in
Clamping
Ring
C
Strainer
012- Chrome Plated Brass
013- Polished Brass
5
3
2 1/8”
5 3/16”
A
6 7/8”
/16” Stud Bolts (3)
5”
/4”
Minimum
B
B-102-012
Maximum
Rough-In Dimensions
Rough-In Dimensions
66
A-110CL-012
2 9/16”
Drainage
Slots in
Clamping
Ring
2” FPT
2” FPT Inlet
2” Caulk Inlet
“A” Length
2 7/8”
3 5/8”
“B” Maximum Length
4 5/16”
4 1/2”
“B” Minimum Length
3”
3 3/16”
“C” Length
2”
2 3/16”
6 1/4”
A-110-E
67
B-102-E
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
C-121 Series Cast Brass Closet Floor Flange
B-110 Series Cast Iron Shower Drain
Application
With P-315 Brass Strainer
• Cast Iron Body
•
•
•
•
•
Heavy Pattern Cast Brass
4” Pipe Size
9/16” Collar
Wiping Surface Machined
Recessed Groove for Bolt
Heads
• Four 5/16” Bolt Slots
• Meets ASME/ANSI B16-23
C-121 #1
• 4 1/4” Cast Brass Strainer
• Threaded Cast Iron
Clamping Ring
• Bolt-Down Cast Iron
Clamping Ring
Ordering
B-110CL-012
Inlet
CL- 2” Caulk Type
FE- 2” Female Pipe Thread
PL- 2” Plain End-No Hub
Rough-In Dimensions
68
Strainer
012- Chrome Plated Brass
013- Polished Brass
Part No.
Description
C-121-01
Cast Brass Closet Flange; #1
5”
5
Drainage
Slots in
Clamping
Ring
/16” Stud Bolts (3)
Part No.
Description
C-121-04
Cast Brass Closet Flange; #4
Carton Qty
Carton Wt
24
32 lbs
Heavy Pattern Cast Brass
Flat type for 4” Pipe
3/8” Deep Collar
Wiping Surface Machined
Recessed Groove for Bolt
Heads
• Four 5/16” Bolt Slots
• Meets ASME/ANSI B16-23
A
2” FPT Inlet
2” Caulk Inlet
2” No Hub
“A” Length
3 1/4”
3 1/4”
2 5/16”
“B” Maximum Length
4 5/16”
4 1/2”
5 3/16”
“B” Minimum Length
3”
3 3/16”
4 1/16”
Part No.
Description
“C” Length
2”
2 3/16”
2 9/16”
C-121-06
Cast Brass Closet Flange; #6
69
24 lbs
•
•
•
•
•
C-121 #6
B-110-E
24
Heavy Pattern Cast Brass
Replacement type for 4” Pipe
Extra Deep 1 1/8” Collar
Wiping Surface Machined
Recessed Groove for Bolt
Heads
• Four 5/16” Bolt Slots
• Meets ASME/ANSI B16-23
6 3/4”
C
Carton Wt
•
•
•
•
•
C-121 #4
B
Carton Qty
Carton Qty
Carton Wt
24
26 lbs
C-121-E
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
C-200/C-201 Series Cast Brass Cleanout Plug
C-212 1” Brass Sinkwaste
• Cast Brass
• Heavy Pattern Cast Brass
• Precision Machined
• Brass Plug
• Available with 1/4”-20 Tapping
Ordering
70
Part No.
C-200-112
C-200-2
C-200-212
C-200-3
C-200-312
C-200-4
C-200-5
C-200-6
Description
1 1/2" brass cleanout plug, countersunk
2" brass cleanout plug, countersunk
2 1/2" brass cleanout plug, countersunk
3" brass cleanout plug, countersunk
3 1/2" brass cleanout plug, countersunk
4" brass cleanout plug, countersunk
5" brass cleanout plug, countersunk
6" brass cleanout plug, countersunk
• Available Chrome Plated or Brass
Carton Qty Carton Wt
24
6 lbs
24
7 lbs
24
9 lbs
24
10 lbs
24
12 lbs
24
15 lbs
24
26 lbs
24
35 lbs
C-201-1
C-201-114
C-201-112
C-201-2
C-201-212
C-201-3
C-201-312
C-201-4
C-201-5
C-201-6
1" brass cleanout plug, raised head
1 1/4" brass cleanout plug, raised head
1 1/2" brass cleanout plug, raised head
2" brass cleanout plug, raised head
2 1/2" brass cleanout plug, raised head
3" brass cleanout plug, raised head
3 1/2" brass cleanout plug, raised head
4" brass cleanout plug, raised head
5" brass cleanout plug, raised head
6" brass cleanout plug, raised head
24
24
24
24
24
24
24
24
24
24
5 lbs
5 lbs
6 lbs
7 lbs
8 lbs
11 lbs
13 lbs
16 lbs
28 lbs
37 lbs
C-200DR-112
C-200DR-2
C-200DR-212
C-200DR-3
C-200DR-312
C-200DR-4
C-200DR-5
C-200DR-6
1 1/2" brass plug, countersunk, drilled and tapped
2" brass plug, countersunk, drilled and tapped
2 1/2" brass plug, countersunk, drilled and tapped
3" brass plug, countersunk, drilled and tapped
3 1/2" brass plug, countersunk, drilled and tapped
4" brass plug, countersunk, drilled and tapped
5" brass plug, countersunk, drilled and tapped
6" brass plug, countersunk, drilled and tapped
24
24
24
24
24
24
24
24
6 lbs
7 lbs
9 lbs
10 lbs
12 lbs
15 lbs
26 lbs
35 lbs
C-201DR-1
C-201DR-114
C-201DR-112
C-201DR-2
C-201DR-212
C-201DR-3
C-201DR-312
C-201DR-4
C-201DR-5
C-201DR-6
1" brass plug, raised head, drilled and tapped
1 1/4" brass plug, raised head, drilled and tapped
1 1/2" brass plug, raised head, drilled and tapped
2" brass plug, raised head, drilled and tapped
2 1/2" brass plug, raised head, drilled and tapped
3" brass plug, raised head, drilled and tapped
3 1/2" brass plug, raised head, drilled and tapped
4" brass plug, raised head, drilled and tapped
5" brass plug, raised head, drilled and tapped
6" brass plug, raised head, drilled and tapped
24
24
24
24
24
24
24
24
24
24
5 lbs
5 lbs
6 lbs
7 lbs
8 lbs
11 lbs
13 lbs
16 lbs
28 lbs
35 lbs
C-200-D
• Includes Tailpiece, Washers and Nuts
• Brass or Nickel Pull Ring
Part No.
Description
Carton Qty
Carton Wt
C-212BR
1” Brass Sinkwaste with Tailpiece, Brass Finish
24
20 lbs
C-212CP
1” Brass Sinkwaste with Tailpiece, Chrome Plated
24
20 lbs
C-212BR-011
1” Brass Sinkwaste Body & Locknut Only, Brass Finish
24
14 lbs
C-212CP-011
1” Brass Sinkwaste Body & Locknut Only, Chrome Plated
24
14 lbs
C-212ST
10” Standpipe for C-212
EA
400-0015
Locknut, Brass for C-212
EA
400-0016
Coupling Nut, Brass for C-212
EA
C-210 1 1/2” Brass Sinkwaste
• Heavy Pattern Cast Brass
• Brass Plug
• Available Chrome Plated or Brass
• Includes Washers and Nut
• Brass or Nickel Pull Ring
71
Part No.
Description
Carton Qty
Carton Wt
C-210BR
1 1/2” Sinkwaste Unit, Brass Finish
24
22 lbs
C-210CP
405-0002
1 1/2” Sinkwaste Unit, Chrome Plated
24
22 lbs
1 1/2” Locknut for C-210
EA
C-212-E
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
C-342 Series Cast Brass Backwater Valve
C-330 Series Floor and Wall Covers
Application
• Precision Machined Cast Brass
• Backwater Valve Unit Complete
with Float Ball and Sealing O-Ring
or Spud Washer Gasket
• For Insertion in Existing or Newly
Installed Drains
• Heavy Duty Stainless Steel
• Floor Covers:
14 Gauge (.080 thick)
• Wall Covers:
22 Gauge (.030 thick)
• Polished Mirror Finish on
Floor and Wall Covers
Ordering
Part No.
Description
Carton Qty
Carton Wt
C-330FL03
3” Stainless Steel Floor Cover
24
4 lbs
C-330FL04
4” Stainless Steel Floor Cover
24
6 lbs
C-330FL05
5” Stainless Steel Floor Cover
24
9 lbs
C-330FL06
6” Stainless Steel Floor Cover
24
12 lbs
C-330FL08
8” Stainless Steel Floor Cover
24
22 lbs
C-330FL10
10” Stainless Steel Floor Cover
24
40 lbs
C-330WL03
3” Stainless Steel Wall Cover
24
3 lbs
C-330WL04
4” Stainless Steel Wall Cover
24
4 lbs
C-330WL05
5” Stainless Steel Wall Cover
24
6 lbs
C-330WL06
6” Stainless Steel Wall Cover
24
8 lbs
C-330WL08
8” Stainless Steel Wall Cover
24
10 lbs
10” Stainless Steel Wall Cover
24
16 lbs
/4”-20 x 2 /4” Bolt-Stainless Steel
24
1 lb
C-330WL10
914-2500-02.25
1
1
914-2500-04
1
/4”-20 x 4” Bolt-Stainless Steel
24
2 lbs
914-2500-06
1
/4”-20 x 6” Bolt-Stainless Steel
24
3 lbs
Part No.
Description
Carton Qty
Carton Wt
C-342OR
2” Brass Backwater Valve complete with O-Ring Seal
24
15 lbs
C-342SP
2” Brass Backwater Valve complete with Spud Washer Seal
24
15 lbs
430-0001
Plastic Float Ball for 2” C-342
EA
C-162 Series 4-Way Loose Key Wrench
• Heavy Pattern Cast Brass
• Designed for PRIER Oval Style
Stems and Standard Square Stems
1/2”
Part No.
Description
C-162
4-Way Loose Key Wrench for /16”, /3”, /2” or oval connections
3
72
1
PRIER
Style
Carton Qty
Carton Wt
72
40 lbs
• 3/8” Square Key Rod
• 3 3/4” Diameter
• Shipped with Set Screw
Part No.
Wall Cover Size
C-Sunk Plug Size
Bolt Length
Carton Qty
Carton Wt
C-330KT-3
3”
1 1/2”
2 1/4”
12
5 lbs
C-330KT-4
4”
2”
1
2 /4”
12
6 lbs
C-330KT-6
6”
3”
2 1/4”
12
8 lbs
Part No.
Description
C-330KT-8
8”
4”
2 /4”
12
14 lbs
C-10
Large Diameter Wheel Handle
C-330-D
1
3/16”
C-10 Series Wheel Handle
Extension Cover Kits
1
1/3”
73
Carton Qty
Carton Wt
72
14 lbs
C-342-F
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
P-310/P-311 Series Cast Brass Shower Drain
• For Installation Into Preformed
Shower Stalls
• 2” FPT or 2” Inside Caulk
Application
Application
• Cast Brass Body
Type Q Shower Stall Drain
P-312 Series Angle Style Brass Shower Drain
Low Profile Type Q Angle Style
P-312H
• Compression Gasket Tightened
with Inner Nut on P-311
• Stainless Steel or Polished
Brass Strainer
Ordering
10- Type Q Brass Shower Drain
11- 2” Brass Shower Drain
Description
P-310FE-SS
Strainer
SS- Stainless Steel
BR- Polished Brass
CL- 2” Caulk Type
FE- 2” Female Pipe Thread*
*CL inlet only available on P-311 Shower Drains
*FE inlet only available on P-310 Shower Drains
Carton Qty
Carton Wt
Type Q Brass Shower Drain; 2” FPT, Stainless Steel Strainer
24
30 lbs
P-310FE-BR
Type Q Brass Shower Drain; 2” FPT, Polished Brass Strainer
24
30 lbs
P-311CL-SS
2” Brass Shower Drain; 2” Caulk with Adapter, Compression
Nut and Key, Stainless Steel Strainer
24
32 lbs
P-311CL-BR
2” Brass Shower Drain; 2” Caulk with Adapter, Compression
Nut and Key, Polished Brass Strainer
24
32 lbs
420-0001
Polished Brass Snap-in Strainer Only for P-310, P-311, P-312
Drains
EA
424-0002
Stainless Steel Snap-in Strainer Only for P-310, P-311, P-312
Drains
EA
P-310-G
Rough-In Dimensions
Part No.
Inlet
Ordering
74
PRIER P-312 Angle Style Shower Drain is designed for use in preformed shower bases. Its low profile and side
outlet make this 2” drain ideal for many flexible installation applications. The cast brass body ensures years of reliable service. The P-312 is available with either a stainless steel or polished brass circular design snap-in strainer.
P-310CL-SS
Type
• Cast Brass Body
• For installation into
preformed shower stalls
• Designed for installation
requiring low clearance
and side outlet
• Stainless Steel or
Polished Brass Strainer
75
Part No.
Description
Carton Qty
Carton Wt
P-312SW-SS
Type Q Elbow Shower Drain, Stainless Steel Strainer,
2” SWT Connection
24
60 lbs
P-312SW-BR
Type Q Elbow Shower Drain, Polished Brass Strainer,
2” SWT Connection
24
60 lbs
P-312H-SS
Type Q Elbow Shower Drain, Tall Stainless Steel Strainer,
2” SWT Connection
8
25.5 lbs
P-312H-BR
Type Q Elbow Shower Drain, Tall Polished Brass Strainer,
2” SWT Connection
8
25.5 lbs
* P-312SW Max Pan Height: 3/16”
* P-312H Pan Height: 0.50” to 0.70”
Rubber Sealing Washer
4 1/4”
Fiber Washer
2” SWT
2 1/2”
P-312-F
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
P-325 Series Floor Drain Covers
Application
• Heavy Pattern Cast Iron
• Medium Duty
• Green Enamel Painted
Page 78
Page 79
Page 80
Page 81
Page 81
Page 82
Page 83
Page 84
Page 85
09 Ballcock
190 Straight Pattern Urinal Flush Valve
370 Liquid Level Control Valve
451 Pressure Relief Valve
184 Self-Closing Multi-Purpose Valve
C-64 Brass Log Lighter Valve
C-67 Brass Log Lighter Ball Valve
C-69 Cast Iron Burner Bar
C-70 Hearthglow Log Lighter Kits
• Screwholes Available
Upon Request
• Custom sizes from 4 1/2”
to 12”available
Ordering
76
Part No.
Description
Thickness
Carton Qty
Carton Wt
P-325-05
5” Cast Iron Replacement Drain Cover
1/4”
12
14 lbs
P-325-06
6” Cast Iron Replacement Drain Cover
1/4”
12
18 lbs
P-325-614
6 1/4” Cast Iron Replacement Drain Cover
1/4”
12
19 lbs
P-325-612
6 1/2” Cast Iron Replacement Drain Cover
1/4”
12
20 lbs
P-325-658
6 5/8” Cast Iron Replacement Drain Cover
1/4”
12
22 lbs
P-325-634
6 3/4” Cast Iron Replacement Drain Cover
1/4”
12
25 lbs
P-325-07
7” Cast Iron Replacement Drain Cover
1/4”
12
26 lbs
P-325-714
7 1/4” Cast Iron Replacement Drain Cover
1/4”
12
27 lbs
P-325-712
7 1/2” Cast Iron Replacement Drain Cover
1/4”
12
28 lbs
P-325-734
7 3/4” Cast Iron Replacement Drain Cover
1/4”
12
29 lbs
P-325-08
8” Cast Iron Replacement Drain Cover
1/4”
12
32 lbs
P-325-814
8 1/4” Cast Iron Replacement Drain Cover
1/4”
12
36 lbs
P-325-812
8 1/2” Cast Iron Replacement Drain Cover
1/4”
12
48 lbs
P-325-834
8 3/4” Cast Iron Replacement Drain Cover
1/4”
12
46 lbs
P-325-09
9” Cast Iron Replacement Drain Cover
5/16”
6
26 lbs
P-325-914
9 1/4” Cast Iron Replacement Drain Cover
5/16”
6
28 lbs
P-325-912
9 1/2” Cast Iron Replacement Drain Cover
5/16”
6
29 lbs
P-325-934
9 3/4” Cast Iron Replacement Drain Cover
5/16”
6
30 lbs
P-325-10
10” Cast Iron Replacement Drain Cover
5/16”
6
32 lbs
P-325-12
12” Cast Iron Replacement Drain Cover
5/16”
6
44 lbs
P-325-F
SPECIALTY
VALVES
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
09 Series Brass Ballcock
190 Series Straight Pattern Urinal Flush Valve
Dependable and quiet
•
Low cost, high quality ballcock
•
Longlife nylon valve seat
•
Operates equally well at high or low pressures
•
Heavy red brass casting
•
Cup seal prevents leaking
•
Seamless copper riser pipe
•
Overall length: 11 1/2”
Ordering Replacement Parts
Part No.
Description
Carton Qty
Carton Wt
09
09 Ballcock, Boxed
20
23 lbs
09-P
09 Ballcock, Blister View
10
11 lbs
7
6
5
4
3
2
ID
Part No.
Description
1
910-3003 Thumb Screws (Brass), Quantity 2 Required
2
617-3001 Seat (Nylon)
3
636-3003 Valve Seat (Neoprene)
4
636-3002 Cup Seal (Huva)
5
123-5573 Plunger Assembly, Contains: 3, 4
6
600-3009 Lower Lever (Brass)
7
600-3010 Upper Lever (Brass)
Ordering Replacement Parts
•
Application
Application
PRIER’s 09 Ballcock combines the features of an economy
brass ballcock with quality to pass the tests of time. It features
heavy red brass castings, seamless copper riser, longlife
nylon valve seat, a smooth flat seating plunger and cup seal
to prevent leaking. The compound lever action assures positive opening and closing at all pressures. The 09 Ballcock
has no whine, whistling squealing or rattling. It is precision
machined to operate dependably and positively. The 09 is
the basis for copied products worldwide.
630-7066 Service Kit for 03/09/XQ16, Contains: 1, 2, 3, 4
1
1
Service kit 630-7066 for the 09 Ballcock also repairs the discontinued
Mansfield 03 and XQ16 ballcocks.
The 190 Urinal Valve is the industry’s finest. It is efficient,
dependable, quiet and versatile. With its automatic metering
design and balanced cartridge assembly, it operates equally
well at high or low pressures. The push button operation
resists damage and vandalism.
The 190 features a casted brass body with triple chrome
plating for long lasting finish. Each valve is water tested to
assure proper operation once installed.
09-E
•
Triple chrome plating
•
Low cost, high quality
•
Operates equally well at high or low pressures
Description
Carton Qty
Carton Wt
190-0
1/2” FNPT Inlet x 3/8” FNPT Outlet Straight Pattern
Urinal Flush Valve
10
21 lbs
Rough-In Dimensions
4”
3”
1
9” Maximum
2
ID
Part No.
Description
1
630-5043
Replacement Cartridge Assembly
3
2
720-3002
Riser Tube (Chrome Plated)
4
3
710-3016
Spud Nut (Chrome Plated Brass)
4
920-3002
Spud Washer (Brass)
5
636-3004
Spud Gasket (Buna)
6
737-3009
Scutum (Polypropolene)
190-KT1
Scutum Assembly, Contains: 3, 4, 5, 6
5
79
Cast brass body
Part No.
6
78
•
190-D
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
451 Series Pressure Relief Valve
370 Series Liquid Level Control Valve
Application
PRIER’s 370 Liquid Level Control Valve is designed for cooling towers, stock tanks, poultry troughs, oil level control or
any use where liquid level control is desired. The valve is
heavy patterned casted brass with a neoprene valve seat. It
features positive opening or closing with no leaks or chatter.
The 370 Liquid Level Control Valve is available in 1/2” or
3/4” inlets. Each valve is individually tested to assure proper
functionality.
•
Rough-In
Dimensions
B
• Engineered for Pressure Relief ONLY
• Opens Automatically When Line or Tank
Pressure Exceeds Valve Setting
• Heavy Casted Red Brass Body
• Stainless Steel Control Springs
• Every Valve Individually Tested
A
For cooling towers, stock tanks, poultry troughs, oil level
control and other uses
•
Maintains liquids at the level set
•
Horizontal or vertical installation
•
1/2” or 3/4” male IPS inlet x 1/2” female IPS outlet
•
Includes 6” rod, chain and float ball
•
Durable cast brass construction
•
Heavy duty neoprene valve seat
•
Positive opening and closing with no leaks or chatter
Part No.
Ordering Replacement Parts
Part No.
Description
Carton Qty
Carton Wt
370-12
1/2” MIP x 1/2” FIP Liquid Level Control Valve
Contains: Chain, Float and 6” Rod
10
13 lbs
370-34
3/4” MIP x 1/2” FIP Liquid Level Control Valve
Contains: Chain, Float and 6” Rod
10
13 lbs
3
1
1
336-6001
O-Ring
2
736-3002
Valve Seat (Neoprene)
3
910-3006
Round Head Screw (Brass)
4
910-3004
Thumb Screw (Brass)
630-7057
Service Kit, Contains: 1, 2, 3, 4
2 7/16”
1 1/8”
1 1/8”
Description
Carton Qty
Carton Wt
50
17 lbs
451-12-125
1/2” MPT Brass Relief Valve 125 PSI
50
17 lbs
451-12-150
1/2” MPT Brass Relief Valve 150 PSI
50
17 lbs
451-12-200
1/2” MPT Brass Relief Valve 200 PSI
50
17 lbs
451-34-75
3/4” MPT Brass Relief Valve 75 PSI
50
17 lbs
451-34-125
3/4” MPT Brass Relief Valve 125 PSI
50
17 lbs
451-34-150
3/4” MPT Brass Relief Valve 150 PSI
50
17 lbs
A B
D
Part No.
81
C
•
•
•
•
•
•
Spring Loaded, Self-Closing Operation
For Fixtures Requiring Manual Valves
Heavy Casted Brass Body
Tamper Resistant Cross Handle
Slip-Stop Prevents Breakage
Tested for Quality and Dependability
A Length
2 3/8”
B Length
3”
C Length
5/8”
D Length
2 7/16”
Description
Carton Qty
Carton Wt
184-38
3/8” x 3/8” Self-Closing Multi-Purpose Valve
5
3 lbs
184-12
1/2” x 1/2” Self-Closing Multi-Purpose Valve
5
3 lbs
Service Kit, Contains: Bonnet Packing, Stem
Assembly, O-Ring and Spring
10
N/A
630-7966
370-F
2 1/4”
184 Series Self-Closing, Multi-Purpose Valve
2
80
A Length
B Length
1/2” MPT Brass Relief Valve 75 PSI
4
Description
3/4” Valve
451-12-75
Rough-In
Dimensions
ID Part No.
1/2” Valve
451-184-E
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
C-64 Series Brass Log Lighter Valve
C-67 Series Brass Log Lighter Ball Valve
•
•
•
•
•
•
Heavy cast brass valve body
3-way design allows for multiple installation options
Polished brass or chrome plated escutcheon
Includes one 1/2” brass plug to block off unused opening
Shipped with hearth key
Available with stem extender
Application
Application
The C-64 Gas Valve is a 3-way design, allowing for installation as a straight or angle valve. This design allows one
valve to be used in multiple applications.
The C-67 AGA Gas Valve is for use on any gas fireplace or
appliance. Using the included operating rod, the installer
can install the valve from 1” to 14” depth, allowing it to be
installed “below-the-joist,” eliminating fittings and installation time. The C-67 Gas Valve is also used as a shutoff for
any gas burning appliance.
•
•
•
•
•
•
Natural Gas BTU Ratings: C-64 Gas
Valve: 70,840 BTUH at 7” W.C. Inlet
Description
Carton Qty
Carton Wt
C-64CP
3 Way Log Lighter Valve; 1/2” FPT; Chrome Plated Escutcheon
24
36 lbs
C-64BR
3 Way Log Lighter Valve; /2” FPT; Polished Brass Escutcheon
24
36 lbs
510-0002
Escutcheon Only, Chrome Plated for C-64
12
7 lbs
510-0001
Escutcheon Only, Polished Brass for C-64
12
7 lbs
C-64-007
Die Cast Log Lighter Key for C-64 Log Lighter Valve
12
1 lb
C-64-009
10” Die Cast Log Lighter Key for C-64 Log Lighter Valve
12
2 lbs
C-64-015
14” Stem Extender for C-64 Log Lighter Valve
12
2 lbs
1
Rough-In Dimensions
3 ½” Overall Length
3 ½” Maximum
2 ¾” Minimum
1 /16”
9
1 1/8”
5
2 3/8”
82
Part No.
Description
Carton Qty
Carton Wt
/2” Extended Stem Log Lighter Valve, Chrome Plated Escutcheon
24
26 lbs
/2” Extended Stem Log Lighter Valve, Brass Escutcheon
24
26 lbs
C-67KT-012
Chrome Escutcheon & Screw Kit for C-67 Valve
12
4 lbs
C-67KT-013
Brass Escutcheon & Screw Kit for C-67 Valve
12
4 lbs
C-67-007
Hearth Key for C-67 Log Lighter Valve
12
2 lbs
C-67CP.50
/16” Square
83
1
10-24
Knurled
Point Set
Screw
B
A
1
C-64-F
1
C-67BR.50
Rough-In Dimensions
2 1/2”
Natural Gas BTU Ratings: 1/2” C-67
Gas Valve: 51,796 BTUH at 7” W.C. Inlet
Ordering
Ordering
Part No.
AGA approved ball valve with stops
Allows custom installation from 1” to 14” from surface
Ideal for below-the-joist installation
Brass or chrome plated escutcheon
For use as log lighter valve or shutoff for gas equipment
Shipped with two wood screws and hearth key
/2”
2 1/8”
A Length
B Length
2 /16”
1 5/8”
5
OFF
C-67-F
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax (800) 362-1463
www.PRIER.com
C-70/71 Hearthglow Log Lighter Kits
C-69 Series Cast Iron Burner Bar
•
•
•
•
•
Three 1/2” openings for flexible installation
Ash shields prevent clogging of gas ports
Flame diffusing design
Ships with 2 plugs to block off unused openings
LP Gas Adapter available
Description
Carton Qty
Carton Wt
C-69
Cast Iron Burner Bar
24
46 lbs
514-0001
LP Adapter for C-69 Burner Bar Only
EA
10”
1
/2” FPT
1
1
1
/2” MPT
1
84
C-69 Cast Iron Burner Bar
PRIER’s C-70/C-71 Hearthglow Log Lighter Kit is often copied, but never quite duplicated. The Hearthglow
Log Lighter Kit is designed for log burning fireplaces and can be installed with multiple log lighter bars for extra
wide hearths.
The C-64 Gas Valve is a 3-way design, allowing for installation as a straight or angle valve. This design allows
one valve to be used in multiple applications. The C-70 Log Lighter Kit includes a brass plug for the unused
opening on the valve. The C-67 Gas Valve includes a 12” operating rod that the installer cuts to the desired
length. The C-67 has the flexibility of being installed from 1” to 14” below the surface. It is perfect for belowthe-joist or in-wall installation.
Natural Gas BTU Ratings:
C-70 Kit with C-64 Gas Valve: 70,840 BTUH at 7” W.C. Inlet
C-71 Kit with C-67 Gas Valve: 58,225 BTUH at 7” W.C. Inlet
/2” FPT
/2” FPT
L.P. Gas Adapter
C-67 Brass Log Lighter
Ball Valve
Kit Includes:
• C-64 3-Way Gas Valve or C-67 Extended Stem Gas Valve (choose one)
• Polished Brass or Polished Chrome Escutcheon
• C-69 Log Lighter Bar with ash shields
• Hearth key
• Burner Bar entry from left, right or bottom
• Available for use with LP Gas by adding PRIER 514-0001 LP Adapter to C-69 Burner Bar
Ordering
Ordering Rough-In Dimensions
Part No.
C-64 Brass Log
Lighter Valve
Features
Natural Gas BTU Ratings:
58,225 BTUH at 7” W.C. Inlet
Application
Application
The C-69 Cast Iron Burner Bar is the original
burner bar with ash shields to prevent clogging of
the gas ports. The tee style design has three 1/2”
I.P.S. tappings for gas service from bottom or either
side. The burner bar is shipped with two plugs for
the unused ports
1.60”
/2” FPT
Part No.
Description
Carton Qty
Carton Wt
C-70CP
Hearthglow Log Lighter Kit with C-64 3-Way Gas Valve-Chrome
Escutcheon & Plug, C-69 Burner Bar with Plugs, Hearth Key
12
48 lbs
C-71CP
Hearthglow Log Lighter Kit with C-67 Extended Stem Gas Valve-Chrome
Escutcheon, C-69 Burner Bar with Plugs, Hearth Key
12
42 lbs
C-70BR
Hearthglow Log Lighter Kit with C-64 3-Way Gas Valve-Polished Brass
Escutcheon & Plug, C-69 Burner Bar with Plugs, Hearth Key
12
48 lbs
C-71BR
Hearthglow Log Lighter Kit with C-67 Extended Stem Gas Valve-Brass
Escutcheon, C-69 Burner Bar with Plugs, Hearth Key
12
42 lbs
LP Gas Adapter for PRIER C-69 Burner Bar
EA
1 lb
514-0001
C-69-E
85
C-70-E
PRIER
®
4515 E 139th Street, Grandview, MO 64030
800-362-9055 | F: 800-362-1463 | www.PRIER.com
QUESTIONS?
CONTACT PRIER’S FRIENDLY CUSTOMER SERVICE
DEPARTMENT AT 800-362-9055 OR [email protected]
FOR MORE TECHNICAL INFORMATION, VISIT WWW.PRIER.COM.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement