VisionSD4+1
VisionSD4+1
HD/SD Video Capture Card
Advanced Graphics Display Technology
PCI Express
RGB 2048x1536
HD 1080p
PAL
HDMI 1080p
NTSC
DVI - 1920x1200
SECAM
DESCRIPTION
The VisionSD4+1 has five complete capture channels
When the RGB/DVI data is displayed on a non Datapath
supporting a single channel for up to 1920x1080 DVI or
graphics card, the VisionSD4+1 sends the data to system
2048x1536 Analog resolution, plus four SD analog capture
memory or direct to the graphics card, dependant on the
channels.
software used for display.
The VisionSD4+1 captures the Analog/DVI data and triple
The VisionSD4+1 is an ideal solution for applications that
buffers it into onboard storage. This data is then copied
require the capture of an RGB/DVI source simultaneously
using DMA to the host system for display, storage or
with up to four SD video sources. Typical applications
streaming.
include:
•
Viewing Analog or DVI sources from PCs, MACs,
When a Datapath graphics card is used, the VisionSD4+1
Industrial/medical equipment, cameras and other video
transfers the data directly to the graphics card thereby
equipment
increasing performance. The VisionSD4+1 sends the
relevant portions of each captured image to each display
channel and instructs each channel to use its graphics
engine to render the data. This fully utilises the hardware
and dramatically increases performance.
•
Streaming video applications
•
Video/Data Wall Controllers
FEATURES
•
•
Four channel SD Video + one channel RGB/DVI/HD
For streaming applications, the VisionSD4+1 can
capture card
be used with Windows Media Encoder to compress
Four Lane PCIe interface with a maximum data
rate of 480MB/sec
•
Maximum analog RGB capture resolution of 2048 x
1536 x 24bit
•
RGB STREAMING
and stream captured video. To replay the video, use
Windows® Media Player.
Any application compatible with Windows® DirectShow technology can use the VisionSD4+1 due to
its built-in WDM support.
Maximum DVI capture resolution of 1920 x 1200 x
24bit
•
HD modes using the supplied DVI/ Component
SOFTWARE
Adapter or DVI/HDMI Adapter (HDCP not supported)
•
Four SD capture channels for PAL/NTSC, SECAM
(composite or S-Video inputs)
•
•
The VisionSD4+1 is supplied with a powerful
software application for configuring the timing
and format of the input sources and displaying the
data. Simply connect your external DVI, Analog
On card processor for real time mode and sync
or video source into the card, run the VisionSD4+1
detection
application to automatically detect the video source
Support for multiple cards allowing up to 64 SD
format and display the captured video in a window
capture channels + 16 DVI-I capture channels. (16
on your desktop.
cards)
•
Direct DMA driver software and streaming driver
•
High quality down scaling
•
Support for YUV 4:2:2, RGB 5:5:5, 5:6:5 and 8:8:8
video formats
•
•
4 Channel Video & 1 Channel RGB/
DVI/HD Capture Card, PLUS 1 x DVI/
DVI/HDMI adapters, PLUS 1 x low
profile card bracket
Support for separate H/V sync, Composite sync or
Includes WDM streaming drivers and the Datapath
Fully integrated with the Datapath Wall Control-
Support for Windows® XP/Vista/Server 2003/Server 2008/Windows® 7
•
VisionSD4+1
direct to graphics memory with scatter gather
red software for video wall applications.
•
Description
VGA, 1 x DVI/Component and 1 x
Vision application software
•
Code
High performance DMA to system memory or
Sync on Green
•
MODELS AVAILABLE
Datapath SDK included for software developers
All products are shipped with the latest software
available, unless stated otherwise.
Special requirements may be organised by contacting
our Sales team.
SPECIFICATION
Board Format
PCI-e x4 plug-in card, 110mm x 204mm.
PCI-e bus master with scatter gather DMA providing maximum data rate of
480MB/s.
Connectors
One DVI-I type connector and one D connector for SD inputs
Maximum Sample Rate
1170Mpixels per second analog RGB or 165 MHz DVI.
Analog modes up to 340MHz pixel clock can be captured using dual-pass
sampling.
Video Sampling
RGB: 24 bits per pixel / 8-8-8 format.
Video: 16bits per pixel/YUV format
SD Maximum Capture Resolution
720x576x16bit
Video Capture Memory
64 MB, triple buffered.
Analog RGB Mode Support
640x480, 800x600, 1024x768, 1280x1024, 1600x1200, 1920x1080, 2048x1536,
custom modes.
DVI Single Link Mode Support
640 x 480, 800 x 600, 1024 x 768, 1280 x 1024, 1600 x 1200, 1920x1080, 1920 x 1200,
and custom modes.
HD Modes
1080p, 1080i, 720p, 576p, 576i, 480p and 480i using the supplied DVI/ Component
Adapter or DVI/HDMI Adapter (HDCP not supported).
Input Mode Detection
Automatic detection of input modes in hardware, enabling the tracking of mode
changes in the source signal.
Pixel Output Formats
RGB: 5-5-5, 5-6-5 or 8-8-8 (24bit/32bit) pixels.
YUV: 4:2:2.
Update Rate
User defined, captured frame rate will match the source providing max data rate
(480MB/s) is not exceeded.
Multi-buffered to eliminate tearing artifacts.
Video Format Options
Analog RGB plus HSync and VSync (5 wire).
Analog RGB with Composite Sync (4 wire).
Analog RGB with Sync on Green/YPbPr (3 wire).
DVI Single Link.
PAL, NTSC, SECAM or S-Video for SD inputs
Operating System Support
Windows® XP, Windows® Vista, Windows® Server 2003, Windows® Server 2008
and Windows® 7.
Power Requirements
Max current at +3.3V – 0.25A.
Max current at +12V – 1.0A.
Max power – 13 Watts.
Operating Temperature
0 to 35 deg C / 32 to 96 deg F
Storage Temperature
-20 to 70 deg C / -4 to 158 deg F
Relative Humidity
5% to 90% non-condensing.
Warranty
3 years
We are continously developing the technology used within our product ranges delivering outstanding innovative solutions,
therefore the specification may change from time to time.
MAIN SALES DEPARTMENT
Datapath Limited,
Alfreton Road
Derby, DE21 4AD
England
Tel: (+44) (0) 1332 294441
Fax: (+44) (0) 1332 290667
email: sales@datapath.co.uk
Web: http://www.datapath.co.uk
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising