advertisement
GV-EV48 Elevator IP Control Panel
Introduction
GV‐EV48 is an elevator controller designed to control access of 1 elevator with a maximum of 48 floors. Up to 2 GV‐Readers / GV‐GF
Fingerprint Readers can be connected to GV‐EV48 using RS‐485 connection and network connection. GV‐EV48 can recognize identification cards and grant access to the authorized floors only.
Key Features
• Grant access to specific elevator floors using access cards, card's PIN code or fingerprint
• GV‐EV48 – 24 Floors: Built‐in 24 relay outputs to support up to 24 elevator floors
• GV‐EV48 – 48 Floors: Built‐in 48 relay outputs to support up to 48 elevator floors
• Support up to 2 GV‐Readers / GV‐GF Fingerprint Readers through network connection and RS‐485 connection
GV-EV48
-1-
August 22, 2016
Specifications
System Requirements
GV‐ASManager Version
Hardware
CPU
Number of User Cards
Event Buffer
Power
GV‐ASManager V4.1 or later
32‐bit ARM7TDMI
40,000 cards
1,000,000 events and log data
AC 100~250 V , 50~60Hz
RS‐485 Interface
TCP/IP Interface
Communication
Battery
Output
GV‐EV48‐24 Floors
GV‐EV48‐48 Floors
Operating Temperature
Operating Humidity
Dimensions (W x H x D)
Weight
Certification
1 RS‐485 interface only for GV‐Readers and GV‐GF Fingerprint Readers (max. 2 readers)
1 TCP/IP interface for GeoVision network readers
TCP/IP
Built‐in battery
24 relay outputs (30VDC, 1A; 125V AC, 0.3A)
48 relay outputs (30VDC, 1A; 125V AC, 0.3A)
0~65°C / 32 ~ 149°F
10% ~ 90% RH (non‐condensing)
210 x 170 x 55 mm (8.27 x 6.69 x 2.17 in)
610 g (1.34 Ib)
CE, FCC, RoHS
Note:
1. GV‐EV48 only supports GeoVision software and readers.
2. Specifications are subject to change without notice.
Options
Optional devices can expand the capabilities and versatilities of your GV‐EV Controllers. Consult your sales representative for more information.
GV‐Reader 1251
GV‐RK1352
GV‐R1352
GV‐DFR1352
GV‐GF Fingerprint
Reader
GV‐CR420
Cabinet
GV‐AS ID Card &
GV‐AS ID Key Fob
GV‐Reader 1251 is a card reader that uses a 125 kHz frequency. It has both Wiegand and RS‐485 outputs that can be connected to any standard access control panel.
GV‐RK1352 is a card reader with keypad that uses a 13.56 MHz frequency. The reader has both Wiegand and
RS‐485 outputs that can be connected to any standard access control panel.
GV‐R1352 is a card reader that uses a 13.56 MHz frequency. The reader has both Wiegand and RS‐485 outputs that can be connected to any standard access control panel.
GV‐DFR1352 is a card reader that uses a 13.56 MHz frequency. The reader has both Wiegand and RS‐485 outputs that can be connected to any standard access control panel.
The reader supports three operation modes: Fingerprint Only, Fingerprint + Card and Card Only. In
Fingerprint Only mode, the fingerprints are enrolled through GV‐ASManager. In Fingerprint + Card mode, the fingerprint templates are stored on the user card. In Card Only mode, the users only need to swipe the card to be granted access. Readers with optical and capacitance sensors are available.
GV‐CR420 is a card reader with a built‐in 4MP wide angle IP camera. The card reader recognizes identification cards and transmits live view through network connection.
With the cabinet, GV‐AS Controllers can be mounted directly to a wall or recessed into the wall.
Two types of cabinet dimensions are available (W x H x D):
• 383.5 x 443.5 x 112.2 mm / 15.1 x 17.5 x 4.4 in
• 300 x 420 x 86 mm / 11.8 x 16.5 x 3.4 in
GV‐AS ID Cards and GV‐AS ID Key Fobs are ideal for business and residential environment, where access control is important for security reasons. 125 kHz and 13.56 MHz cards and key fobs are available.
GV-EV48
-2-
August 22, 2016
Packing List
• GV‐EV48 – 24 Floors / 48 Floors
• Power Adaptor 12V DC / 3A
• Power Cord
• Battery Cable
• Screw x 8
• Hex Nut x 8
• Hex Pillar x 8
• Micro SD Card 2 GB
• Software CD
• Warranty Card
GV-EV48
-3-
August 22, 2016
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project