Wilson Electronics 901132 Datasheet

Wilson Electronics 901132 Datasheet
PRODUCT CATALOG
INDUSTRY LEADING CELLULAR SIGNAL
BOOSTERS & ANTENNAS
SSUE 14 @ Wilson
Electronics, Inc.
© Wilson’
Electronics, Inc.
ENGINEERING + EXPERIENCE + EXCELLENCE
Wilson Electronics, Inc. has been aleaderin the wireless communications
industry for more than 40 years. The company designs and manufactures
signal boosters, antennas and related components that significantly
improve cellular signal reception and transmission in a wide variety of
applications, including mobile, indoors and M2M. For its signal boosters,
Wilson Electronics uses double-shielded RF enclosures and cell tower
simulators for compliance testing. With extensive experience in antenna
and signal booster research and design, the company's engineering
team uses a state-of-the-art testing laboratory, including an anechoic
chamber and network analyzers, to fine-tune antenna designs and
performance. All products are engineered and assembled in the
company's /6,000-square-foot headquarters in St. George, Utah, and
wear the label MADE IN THE USA. Wilson Electronics has product dealers
in all 50 states as well as in countries throughout the world.
PART NUMBER INDEX
PART PAGE PART PAGE PART PAGE PART PAGE PART PAGE PART PAGE
301101 33 301201 37 801865 22 859923 45 701130 41 752450 44
301102 35 301202 37 802365 21 859924 45 701132 41 952475 44
301103 34 301208 36 804080 18 857926 44 701133 41 971103 43
301104 35 301209 36 805045 19 859927 44 701134 41 771104 43
301105 35 301210 36 806215 24 859931 41 701137 41 971105 4
301111 39 301701 33 811201 28 859935 44 701137 41 971106 43
301112 35 301703 34 811210 13 859936 44 750602 44 971107 43
301113 34 304201 35 811210 30 859939 45 750620 44 771108 43
301114 35 304202 34 811211 30 859940 45 750630 44 971109 43
301119 33 304203 35 811214 30 859957 42 750650 44 971110 43
301121 37 304411 38 811216 27 859959 42 951101 44 971111 43
301123 37 304447 41 811225 26 859963 45 751102 44 971112 43
301124 37 304451 37 811701 28 859969 45 951103 44 971113 43
301125 34 304452 39 811710 13 859976 42 751104 44 771114 43
301126 34 304453 37 811701 28 859977 45 951110 44 971115 43
301127 36 304471 39 811710 13 859980 42 951116 44 971116 43
301128 34 304472 39 812726 9 859981 42 751116 44 771117 43
301129 38 304473 39 815125 31 859983 45 751120 44 971118 43
301130 33 304475 38 815126 7 859989 45 751125 44 971119 43
301131 34 801201 12 815225 10 859992 42 751130 44 771120 43
301132 34 801212 30 815226 31 867501 44 752300 44 971121 43
301133 33 801240 11 815326 8 701101 41 752302 44 971127 43
301135 37 801240 31 841245 19 701102 41 752310 44 971128 43
301141 37 801241 31 841246 30 701103 41 752320 44 971129 43
301142 38 801242 31 859702 42 701104 41 752330 44 971130 43
301143 36 801245 19 859703 45 701106 41 752350 44 971131 43
301146 37 801247 15 857705 45 701117 41 752375 44 971132 43
301148 37 801262 16 857706 42 9011179 41 752400 44 971136 43
301149 36 801265 20 859707 42 701120 41 752402 44 971139 43
301151 37 801280 20 859912 45 701123 41 752410 44
301155 37 801285 23 859913 45 701125 41 752420 44
301157 37 801506 17 859922 42 701128 41 752430 44
CONTENTS
Company Profile
Warranty Information
Problem: Dropped Calls / Solution: Wilson Electronics
Stay Connected On the Go / Stay Connected Indoors
BOOSTERS
Mobile Solutions
Sleek® 4G-V
Sleek® 4G-A
Sleek® 4G-C
Sleek®
MobilePro®
Dual-Band Mobile Wireless
SEDE
SIGNALBOOST* Dual-Band Cellular Boosters
Building Solutions
DT Desktop Signal Booster 800/1900 MHz
DB Pro™ Cellular Booster (75chm)
200 MHz Building Wireless Cellular Booster
IDEM Building Wireless Cellular Booster
AG SOHO (Small Office / Home Office) 60 & 65 Wireless Boosters
AG Pro 70™ & AG Pro 75™ Cellular Boosters
AWS 70 Cellular Booster (Band 4)
4G-V LTE 700 Indoor Cellular Booster (Band 13) Yenzon
AG Pro-Installer Signal Booster
In-Line Booster
M2M
M2M Solutions
DataPro™ Direct Connect Cellular Booster
GSM High Power Direct Connect Cellular Signal Booster
Direct-Connect Boosters
ANTENNAS
High-Gain Antennas
General Mobile External Antennas
Low Profile 8: Ultra-Slim Antennas
Cradle Plus Antennas
Yagi Antennas - Durable, high-gain, directional antennas
Building Antennas
Antenna Frequency Specific Gain Chart (dBi)
OTHER PRODUCTS
Cellular Data Cards
Mounts and Replacement Parts
Taps, Splitters, Lightning Protection, Combiner/Diplexer
Connectors & Cnmp Connectors
Coaxial Cables
The RF Signal Detector
Power Supplies & Carrying Case
WilsonElectronics.com
PAGE
2,3
4,5
0 O «“ oO
26
27
28-29
32-33
34,35
36
37
37
SYMBOL INDEX
Passenger Vehicles
Commercial Vehicles
Recreational Vehicles
Residential Buildings
Industrial / Commercial Buildings
Marine Craft
Machine to Machine
ALL WILSON BOOSTERS INCLUDE THESE
STANDARD FEATURES
* More than 20 times the power of your cell phone alone
* Extends device battery life
* Boosts both voice and data communications
* Provides a strong, reliable signal in weak signal areas
+ All in-building boosters feature adjustable gain
simplifying installation
WARRANTY INFORMATION
30-Day Money-Back Guarantee
All Wilson Electronics products are protected by a 30-day
money-back guarantee. If for any reason the performance of
any product is not acceptable, the product may be returned
to the reseller with a dated proof of purchase.
Signal Booster Warranty
Wilson Electronics’ signal boosters are warranted for one (1)
year against defects in workmanship and/or materials.
Antenna Warranty
90-Day Warranty
Wilson Electronics antennas are warranted for ninety (90) days
against defects in workmanship and/or materials.
Warranty cases may be resolved by returning the product
directly to the reseller with a dated proof of purchase. Signal
boosters and antennas may also be retumed directly to the
manufacturer, at the consumer's expense, with a dated proof
of purchase and a Returned Material Authorization (RMA)
number supplied by Wilson. Wilson shall, at its option, either
repair or replace the product and will pay for delivery of the
repaired or replaced product back to the original consumer
within the U.S.
These warranties do not apply to any products determined by
Wilson Electronics to have been subjected to misuse, abuse,
neglect or mishandling that alters or damages physical or
electronic properties.
Failure to use a surge protected AC Power Strip with at least
1000 Joule rating will void your warranty.
EMA numbers may be obtained by contacting Technical
Support at 1-866-294-6996.
Toll Free 1-866-294-6996
The Problem: Dropped Calls
1. Location of the Nearest Cell Tower
Distance plays the biggest role in limiting
cellular communications, especially in ru-
ral areas. The farther you are from a cell
tower, the weaker your signal will be.
2. Natural and Man-Made Obstruc-
tions Hills, trees, valleys and buildings all
interfere with the quality of the cellular sig-
nal between your phone or data card and
the cell tower. Stucco and concrete walls
used in homes, offices and other buildings
block cellular signals, making it difficult to
receive a strong cellular signal. You may
be relatively close to a cell fower but un-
able fo connect because of obstructions.
Everyone who uses a cellular device such as a cell phone,
data card or cellular modem, knows how aggravating
it is to drop a call or not be able to connect. Fortunately,
Wilson Electronics has the solution! Our industry-leading cell
phone signal boosters and antennas enable you to connect
and maintain calls by improving your cellular signal at
home, at work and on the go. Wilson Electronics keeps you
connected!
el
[ | г.
| | J E
For stranded motorists and emergency services personnel, the inability to make
a cell phone call can mean the difference between life and death.
Stay connected
in buildings
Y
AN
Y
Man-Made Obstruction
Metal / Concrete Structure
WilsonElectronics.com
2 Toll Free 1-866-294-6996
The Solution: Wilson Electronics Products
Boost Your Cellular Signal
Wilson Electronics cell phone signal boosters eliminate the frustration of dropped calls, limited range
and slow data rates by amplifying incoming and outgoing cellular signals. With a reputation as the
finest in the business, our bi-directional boosters and antennas are expertly engineered to detect
and amplify weak incoming signals your cellular device would miss and simultaneously transmit a
much stronger signal back to the cell tower.
Product testing proves that Wilson signal boosters lead the industry with:
* The highest receiver sensitivity: Captures weak and distant cellular signals
* The highest power output: Reaches distant cell towers
* Microprocessor-controlled circuitry: Patented smart technology that
protects cell towers
Wilson's wide range of plug-and-play packages and individual
products for custom installations offer great value and ensures
reliable cellular communication.
For people who rely on their cell phone or data card for business, it can The Sleek®
affect the outcome of important business decisions or relationships. 815226
Stay connected Stay connected up to
in trouble spots 6 times farther with a
Wilson signal
booster
Stay connected
in trouble spots y
Tt TE tt $
| © О
— Natural Obstructions ===
Man-Made Obstruction © Distance
Valleys / Ravines / Tunnels from cell tower
WilsonElectronics.com 3 Toll Free 1-866-294-6996
Stay Connected On The Go
TRUCK
Mobile Solutions
Whether you're traveling on land or at sea, Wilson Electronics keeps you connected!
——
Wilson Electronics manufactures powerful mobile wireless and direct-connect cell
phone signal boosters for all carrier frequencies (Cellular, PCS, AWS, LTE, and Nextel/
IDEN), as well as high-gain antennas with magnet, mirror, glass, and permanent
mounts. In a wireless installation, which requires no physical connection between the
@ cell phone and signal booster, the outside antenna collects weak cellular
sighals and sends them to the booster. The booster amplifies those
signals and retransmits them to cell phones and data cards
in the vehicle through the inside antenna. The
processisthenreversed andthe amplified
signals from the cell phone or data
card are transmitted back fo
the cell tower.
=
=
=
=
„назв ын
Dual Band Mobile Wireless 801212
MobilePro* 801241 Wilson Electronics most popular mobile
signal booster combines with the outside
Sleek" 815226 The MobilePro can be easily moved from Magnet Mount antenna and inside Low
. . . vehicle to building making it great for Profile antenna for a high performance
E al Da ias cars, hotels, airports and offices. Includes multi-user option
both voice and data performance. With 3 toi ER
20 times the power to the cell tower of US E dl y > E
; a Mount antenna and multiple mounting
a cell phone alone, it features a built-in options and supDiv options
antenna, battery charging port and works Р Р BERS SIR :
with Cellular (800 MHz) and PCS (1900 MHz)
frequencies.
i)
mE
Supports Multiple
Users
Toll Free 1-866-294-6996
WilsonElectronics.com
Stay Connected Indoors
HOME APARTMENT SMALL OFFICE HIGH RISE WAREHOUSE
Building Solutions
Wilson Electronics offers a full line of high-performance building signal boosters and antennas
to give you a strong, reliable cell phone signal indoors.
Wilson Electronics manufactures building signal boosters and antennas to improve cell
phone performance in a single room, an entire home, a large warehouse, or a
multi-story office building. A typical wireless building system includes an
outside antenna that detects weak
cellular signals and sends them fo
the booster. Powered through a
standard wall outlet, the booster
amplifies those signalsandsendsthem
to the inside antenna, which communicates
the stronger signal to cell phones and data
cards indoors. When a cell phone or data card
fransmits, the process is reversed.
AG Pro 70™ & AG Pro 75™ Cellular Booster
The AG Pro series is a dual-band, installer-
DB Pro™ 841252
friendly booster designed to provide a
SOHO 841245 The DB Pro was designed for simple strong cellular signal inside a building. It is
installation using standard TV cable often the highest gain booster providing the
Features an outside high gain omni pre-wired in homes. Also includes an inside largest coverage area.
directional antenna (eliminates aiming the panel antenna, high gain DB Pro booster,
antenna), an inside panel antenna, and a cable and an outside omni directional
booster. Includes everything needed for antenna.
simple installation.
SUPPORTS
PARTLAL
HOUSE
SUPPORTS
WHOLE
HOUSE BUILDINGS
WilsonElectronics.com 3 Toll Free 1-866-294-6996
WILSON ELECTRONICS HAS A SOLUTION
FOR EVERY APPLICATION!
WilsonElectronics.com 6 Toll Free 1-866-294-6996
5 & A 700/800/1900 MHz
PWilson® Electronics DO
Sleek®4G-V
FEATURES
* Boosts Verizon Wireless® 700 MHz (Band 13) LTE as well as 3G & 2G
cellular signals on 800 MHz & 1900 MHz
* Portable — can easily be moved between vehicles
« Reduces dropped calls, extends signal range, and increases data rates
RSL] La eme « Amplifies signals to and from cell tower
* Receives weak signals the phone alone may not
* Built-in battery charging port (adapters sold separately)
» Adjustable to fit any size cell phone or MiFi® card
« Simplifies hands free operation
* Installs in minutes — no special tools required
Package includes everything needed — plug-and-play
ra
u
=
e,
Oo
с
©
À
« Attractive, compact design
* РСС Type Accepted
Single-User
Solution
SPECIFICATIONS Optional Home/Office Accessory Kit
PART 859970
Part Number 815126
E Includes: Adjustable Suction Cup Desk Mount
Frequency 774 - 787 MI 824-894 MHz 1850-1990 MHz Window-Mount Antenna Bracket
13" Zippered Camying Pouch >
rm
Max Uplink Power 450 mw 850 mw 600 mw E
i =
Noise Figure 5.0 dB nominal 5.0 dB nominal 3.0 dB nominal 5
=
Flatness +4 dB PE
Power Requirements 5V DC* ==
Connectors Antenna: SMA Female * Power adapter: Mini USB Optional charging cables 859967 - Micro to mini USB =;
859966 - Mini to Mini USB гп
Dimensions 2.25x 4.25 x 2.5in/5x97.5x5.6cm 859979 - iPhone t&o Mini USB 5
Ш
Weight 2.5 oz / 0.07 kg * Use only with Wilson power supply —
—
==
=
INSTALLATION |
Verizon Wireless is a trademark of Verizon Trademark Services, LLC
TYNILIS
EE
WilsonElectronics.com 7 Toll Free 1-866-294-6996
>
=
и
=
=
a.
т
<
BOOSTER
46-A CELLULAR SIGNAL
SLEEK
& г = 700/800/1900 MHz
PWilson® Electronics Se
Sleek®4G-A
FEATURES
* Boosts AT&T's 700 MHz (Band 12) 4G LTE as well as 3G & 2G cellular
signals on 800 MHz & 1900 MHz
* Portable — can easily be moved between vehicles
* Reduces dropped calls, extends signal range, and increases data rates
« Amplifies signals to and from cell tower
* Receives weak signals the phone alone may not
+ Built-in battery charging port (adapters sold separately)
* Adjustable to fit any size cell phone or MiFi® card
« Simplifies hands free operation
* Installs in minutes — no special tools required
* Package includes everything needed — plug-and-play
« Attractive, compact design
s FCC Type Accepted
Single-User
solution
SPECIFICATIONS Optional Home/Office Accessory Kit
PART 859270
Part Number 815326
ET Includes: Adjustable Suction Cup Desk Mount
Frequency 728 ; 746 LL 824-894 MHz 1850-1990 MHz Window-Mount Antenna Bracket
13 Zippered Camying Pouch
Gain 26 dB AC/DC Power Supply
Max Uplink Power 560 mw 660 mw 480 mw
Er hi Ison
Noise Figure 5.0 dB nominal 3.0 dB nominal 3.0 dB nominal
Flatness +4 dB
Power Requirements 5Y DC
Connectors Antenna: SMA Female * Power adapter: Mini USB Optional charging cables 859967 - Micro to mini USB
859946 - Mini to Mini USB
Dimensions 2.25 x 4.25 x 2.5 inch / 5x 9.5 x 5.6 cm 859979 - iPhone to Mini USB
Weight 2.5 oz / 0.07 kg * Use only with Wilson power supply
INSTALLATION
ATET Wireless is a trademark of ATET Trademark Services, LLC
WilsonElectronics.com 8 Toll Free 1-866-294-6996
= i = 800/1700/1900/2100 MHz
® Wilson’ Electronics SA
Sleek®4G-C
26 dB
FEATURES
Pra | * Boosts 4G on the AWS frequency band, as well as 3G & 2G cellular signals
on 800 MHz & 1900 MHz
* Portable — can easily be moved between vehicles
* Reduces dropped calls, extends signal range, and increases data rates
« Amplifies signals to and from cell tower
* Receives weak signals the phone alone may not
* Built-in battery charging port (adapters sold separately)
* Adjustable to fit any size cell phone or MiFi® card
<
=
"VU
e
Oo
Cc
O
=
= Simplifies hands free operation
* [Installs in minutes — no special tools required
Package includes everything needed — plug-and-play
« Attractive, compact design
Single-User
Solution
SPECIFICATIONS Optional Home/Office Accessory Kit
PART 859970
Part Number 812726
TENE Includes: Adjustable Suction Cup Desk Mount
Frequency 2110-2155 ME 824-894 MHz 1850-1990 MHz Window-Mount Antenna Bracket
13" Zippered Camying Pouch pa
Li)
Max Uplink Power 450 mw 830 mw 725 mw E
ка ==
Noise Figure 5.0 dB nominal 5.0 dB nominal 3.0 dB nominal Ш
В =
Flatness +4 de ao
Power Requirements SV DC* <>
Connectors Antenna: SMA Female * Power adapter: Mini USB Optional charging cables 859967 - Micro to mini USB Lx
859966 - Mini to Mini USB rm
Dimensions 2.25x 4.25 x 25in/5x97.5x5.6cm 859979 - IPhone to Mini USB и
res
Weight 2.5 oz / 0.07 kg * Use only with Wilson power supply ==
=
x
2
INSTALLATION ыы }
BA
ARE
WilsonElectronics.com 9 Toll Free 1-866-294-6996
Wilson® Electronics E
Say Goodbye to Dropped Calls DA m
Sleek®
FEATURES
* Portable — can easily be moved between vehicles
* Reduces dropped calls, extends signal range, and increases data rates
« Amplifies signals to and from cell tower
* Receives weak signals the phone alone may not
* Built-in battery charging port (adapters sold separately)
+ Adjustable to fit any size cell phone or MIFIS card
« Simplifies hands free operation
« (nstalls in minutes — no special tools required
* Package includes everything needed — plug-and-play
« Attractive, compact design
* FCC and IC Type Accepted
Single-User
Solution
SPECIFICATIONS KIT
The Wilson Electronics’ Sleek Signal Booster kit (815226) includes:*
Part Number 815226
* Sleek alHin-one cradle and signal booster
Hequency. Sta HEL SRI Tl vl « Outside vehicle mini magnet-mount antenna
Gain 26 dB / 26 dB * Power adapter"
* 30-day money-back guarantee
Max Uplink Power 1240 mw / 1800 mw * One-year product warranty A
Ш Max Downlink Power +8 dBm
= Noise Figure 3.0 dB nominal
|
un Flatness +4 dB
>
> Power Requirements 5v * In-Home accessory kit (859970) sold separately
ЖЖ 1 5
ee] Connecian E Use only with Wilson power supply
— ini mañas 2.25 x 4.25 x 2.5 in Optional charging cables 859967 - Micro to mini USB
== Эх 9.5 х 5.6 Ст 859966 - Mini to Mini USB
=== Weight 2.507 / 0.07 kg 859979 - iPhone to Mini USB
LL
LE
INSTALLATION }
CELLULAR
SLEEK'
WilsonElectronics.com 10 Toll Free 1-866-294-6996
800/1700 MHz
BEE
=n
© Wilson® Electronics
Say Goodbye to Dropped Calls
MobilePro®
40/45 dB
FEATURES
Ideal for laptop data cards — can be powered by USB port.
* Portable — can easily be moved from vehicle to building
* [Installs in minutes — no special tools required
» Features a built-in inside antenna
s Multiple power options - USB port, DC power supply (vehicle power
adapter) or AC adapter
« Wireless operation — no physical connection to cell phone or data card
* FCC and IC Type Accepted
SPECIFICATIONS KIT OPTIONS
Wilson Electronics SIGNALBOOST MobilePro improves cell phone and data
Part Number 801240 card performance on the road, in airports, hotels and office buildings.
пони 824-894 MHz / 1850-1990 MHz With more than 20 times the output power of a typical cell phone alone,
it features a built-in antenna, supports multiple phones and data cards,
Gain 40 dB / 45 dB works with Cellular (800 MHz) and PCS (1900 MHz) frequencies, and offers
Max Uplink Power 1400 mw / 1225 mw multiple power options (USB port, vehicle power adapter or standard AC
outlet). The MobilePro is available in 2 plug-and-play kits to meet specific
Max Downlink Power é/0dBm user needs.
Noise Figure 3.5 dB nominal SEE KIT COMPONENTS ON PAGE 30 & 31
Flatness +4 dB Part Number Exterior Antenna
Power Requirements 5у — 8у 801240 Purchased Separately*
Connectors SMA Female 801241 12” Magnet Mount
. . 2x475x1in пая
Dimensions 51x12.1x2.5cm 801242 4” Mini Magnet Mount
Weight З ох / 0.09 Ка 859952 Home Accessory Kit
INSTALLATION
WilsonElectronics.com
Ш Toll Free 1-866-294-6996
re
LE
„=
=
==
cs
CC
>
Er
ll
=
SOUdIIION
SERN
dvI1In113) AONVE
4315004
800/1900 MHz
==
© Wilson® Electronics
Say Goodbye fo Dropped Calls
Dual-Band Mobile Wireless
WilsonElectronics.com
Best Selling and Top Performing Mobile Signal Booster
Used by public safety officials and government agencies as well as road
warriors to truckers to soccer moms, thousands of drivers depend on Wilson
Electronics Mobile Cellular Boosters to stay connected around town and
on the open highway. These powerful boosters enable cell phone and
data card users to extend their signal range, reduce dropped calls, and
increase data rates with no physical connection fo cell phone or data
card. And, because they're wireless, these boosters support multiple users
simultaneously.
DUAL-BAND
FEATURES
>
= » Allows multiple phones and cellular data cards to be used simultaneously
» Oscillation detection and shutdown with auto reset
— * Mo physical connection to your cell phone or cellular data card
en « Works on all generations of COMA, TOMA, GSM, and 36
=> * Power control logic ensures maximum gain
o * Overload protection circuit — protects cell system from overload
ee] * FCC and iC Type Accepted
LE
Le
sons ANTENNA OPTIONS
—
Les s NMO Antenna * Mini Magnet Mount Antenna
De * Magnet Mount Antenna * Trucker Antenna
= For additional options for this product see pages 32-35
[TE |
—
co
<
= SPECIFICATIONS INSTALLATION DIAGRAM
=
= Part Number 801201 KIT
=
ca Frequency 824-894 MHz / 1850-1590 MHz
" #
N Gain 50 dB / 50 dB = a a \
AUTOMATIC GAIN CONTROL PF JE
=T ~ ( #\
= Max Uplink Power 2800 mW / 2300 mW
= Max Downlink Power +10 dBm №
E Noise Figure 3.5 dB nominal a |
"ня ( à)
un Flainess +4 dB 5 py)
k 7
< =
= Power Requirements é V, 3 À max
Connectors FME-Male 50 ohms
—
; a 5x35x1.25in
=
Btn 11.43 x 8.9 x 3.2 ст
pra
(e Weight 1.5 1bs / 0.7 kg
E KIT = Available in Plug-and-Play kit (Page 30)
12 Toll Free 1-866-294-6996
© Wilson® Electronics
Say Goodbye to Dropped Calls
SIGNALBOOST™ Dual-Band Cellular Boosters
(5) Dual Bard Gelutar / Pos
FEATURES
800/1900 » 7900/1800 *« 700/2100 MHz
EEE
Inductively couples to phone and all data cards with Ultra-
Slim antenna - no adapter required. Operates similar to direct
connect signal boosters.
s Works with all Cellular/PCS cell phones and data cards [except IDEN)
* Connects to ALL phones and data cards with a Universal Ultra-Slim
Antenna using a Velcro® patch
« Mo plug-in phone adapter needed
« Significantly improves voice and data signal quality
Single-User * Increases data communication rates needed for 3G technologies
* Receives and transmits better than your cell phone
« Works great in mobile, building and marine applications
* Works on all generations of CDMA, TDMA and GSM
* Up to 3 watts maximum power
* РСС and iC Type Accepted
Solution
HOME/OFFICE INSTALLATION DIAGRAM
SPECIFICATION
Part Number
Frequency
Gain
Max Uplink Power
Max Downlink Power
Noise Figure
Flatness
Power Requirements
Connectors
Dimensions
Weight
ЖЕ 811210
824-894 MHz
1850-1990 MHz
811710
INTERNATIONAL USE KIT
870-760 MHz
1710-1880 MHz
30 dB / 30 dB
2700 mw / 1070 mw
+6 / +7 dBm
3.5 dB nominal
+2 dB
12VDC/2Amax
FME-Male 50 ohms
5х 3.5 х 1.5 п / 12.7 х 8.9 х 3 ст
WilsonElectronics.com
1.03 Ibs / 0.468 kg
13
MOBILE INSTALLATION DIAGRAM
811910
INTERNATIONAL USE
870-760 MHz
1885-2200 MHz
Attach the
Velero Universal
Ultre-Slim
Antenna to he
back of your cell |
phone, data card |
or MiFi device
Toll Free 1-866-294-6996
a.
E
E
Mo
=
CO
——
Co
=D
=
=~
y
(a)
a
со
Za
À
co
=
©
wlSO008TYNDOIS
EEN
dvYy1n1133 AONVE
$43158004
E A LLE 1
LIT FFF EU
LILI |
LAN NII
E ETA IEEE
| HI HIHI
TSN 1 7
и
ra
©
=
-
=
O
N
O
-
=
—
=
O
зн)
Toll Free 1-866-294-6996
14
WILSON ELECTRONICS HAS VARIOUS
SIGNAL BOOSTERS FOR USE INDOORS
WilsonElectronics.com
800/1700 MHz
ae
© Wilson® Electronics
Say Goodbye to Dropped Calls
DT Desktop Signal Booster 800/1900 MHz
= Г | EA |
чый ый ый Бы” J ыы” Tal БЫ
> Improve cellular device performance in your home or
wilson office - anywhere you need a stronger signal indoors!
FEATURES
м Fi SUPPORTS
SUPPO
An MULTIPLE
HOUSE USERS
* Boosts signals to and from cell tower
« Connecis wirelessly to cellular devices
* Separate gain controls for 800 and 1900 frequency bands
* Supports multiple simultaneous connections
« FCC and IC Type Accepted
« Automatic cell tower protections
* Universally supports all 800 MHz & 1900 MHz devices
=
SPECIFICATIONS INSTALLATION =
ral
Part Number 801247 =
rm
Frequency 824-894 MHz / 1850-1990 MHz en
| [LE =
Gain 55 dB / 60 dB $ Ш
: >
Te TK ELLA Home/Office Installation with =
Menc Douniink Pouces 26 dBm / 25 dBm Multiple Antenna Mounting Options :
‘ wn
Son : Area Needin я —
Noise Figure 3.5 dB nominal Increased $ GOOD BETTER
Signal a»
Flatness +5 dB fi N ) =
h A | >
Power Requirements 120-240V AC, 50-60 Hz, 8 W < i =
Connectors SMA-Female / F-Female ` EA MARES =
SignalBoost™ DT Option C Option B Option A vo
Bi . 6.2 х 4.2 х 1.5 п o
sla 15.7 x 10.7 x 3.8 cm <
Wireless operation - no physical connection to cell phone or cellular data card ón
Weight 0.64 Ibs / 0.29 kg
—
rm
x
WilsonElectronics.com
* A Best Seller
* Boosts multiple cellular devices simultaneously
* Works with all 800 MHz 8: 1900 MHz devices 8: camers
* DIY installation
* Extends cellular device battery life
« FCC and IC Type Accepted
PACKAGE CONTENTS
15 Toll Free 1-866-294-6996
wlSO008TYNDIS
10
cr
=
=
—
| ==
в
„=
|=
006hH/008
(T50HM)
BOOSTER
Le «5
=x
—
—
—
—
inl
|
BUILDING WIRELESS
PRO"
800/1900 MHz
dE
% Wilson” Electronics
Say Goodbye fo Dropped Calls
DB Pro™ Cellular Booster (75 ohm)
One of Wilson's BEST SELLING dual-band (800 &1900
MHz) wireless signal booster for use in homes, offices
and other buildings.
The DB Pro™ cellular booster significantly improves voice and data
performance of any cellular device on any network (Cellular and PCS)
inside of buildings expernencing weak signal, such as: homes, fire stations,
command posts, offices and other buildings. This 62/65 dB building signal
booster combines high performance with ease of installation. The DB Pro
booster can be used with an outside omni-directional gain antenna with
multiple mounting options that eliminates researching cell tower locations
and antenna onentation. The inside panel antennas can be ceiling or
wall mounted and can be completely disguised. All components are
interconnected using readily available RG-6 Coax, which is often found
pre-installed, simplifying cable runs.
SUPPORTS
WHOLE
HOUSE
FEATURES
* A Best Seller
« Significantly improves voice and data quality
« Works wirelessly with multiple cell phones and data cards simultaneously =»
* Receives and transmits better than your cell phone alone MES
* Designed for use with standard TV cable common in many homes No
« Extends cell phone batteny life | \
* Cell tower fnrendly technology
« FCC and IC Type Accepted
841262 841263
Kit includes outside
Ohm antenna
Kit includes outside
directional antenna
SPECIFICATIONS INSTALLATION
Part Number 801242
Frequency 824-894 MHz / 1850-1990 MHz
Gain 62 dB / 65 dB б/
Мах Uplink Power 1200 mw / 1114 mw
Max Downlink Power 26 dBm / 25 dBm
Noise Figure 3.5 dB nominal —
Flatness +5 dB
Power Requirements 120-240V AC, 50-60 Hz, 8 W
Connectors Female
eran 6.2 X 4.2 x 1.5 inch
15.7 x 10.7 x 3.8 cm
*0.64 Ibs / 0.29 kg x
Weight “Weight and dimensions are for amplifier
WilsonElectronics.com 16
only, for total kit weight contact your
Wikon Electronics sales representative.
Toll Free 1-866-294-6996
880/960 MHz
Say Goodbye to Dropped Calls
© Wilson® Electronics a
900 MHz Building Wireless Cellular Booster
HE nor
SUPPORTS
MULTIPLE
USERS
SUPPORTS
WHOLE
HOUSE
INSTALLATION
SPECIFICATIONS
Part Number
Frequency
Gain (Rx/Tx)
Max Uplink Power
Max Downlink Power
Noise Figure
Flatness
Power Requirements
Connectors
Dimensions
Weight
Wilson
In-Building Wireless
GSM 86006 Amplifier
Bile
[email protected] © © ©
Versatile, Powerful Wireless Signal Boosters
for use in Homes, Offices and other Buildings
The performance of cell phones and laptop data cards can be
compromised in many buildings due to concrete, stucco, or metal walls
that block the cellular signals coming in and going out. To remedy that
problem, Wilson Electronics offers the 801506 Signal Booster. Available in a
50 dB model and covering 880/940 MHz, this indoor signal booster supports
multiple cell phones and data cards simultaneously and is compatible with
a wide variety of Wilson indoor and outdoor antennas. The result? A strong,
reliable cell signal where you need it, at home or at work.
FEATURES
« Works with all cell phones and laptop data cards
* Improves data communication rates needed for 3G technologies
« Automatic gain control up to 60 dB
« Gain indicator lights
* Shutdown on overload protection
* Built for International use
« FCC Type Accepted (af 162 mw)
801506
INTERNATIONAL USE
880-915 MHz / 925-960 MHz
60 dB
1000 mw
23 dBm
3 dB typical
+4 dB
6V DC, 3 À max
N-Female 50 ohms
5.6 x 3.6 x 1.7 п / 14.2 x 9.1 x 4.4 ст
1.5 165 / 0.7 kg
WilsonElectronics.com 1.7 Toll Free 1-866-294-6996
| == |
| —
|
||
prs
a»
=
3
m
|
rm
en
en
E
EE
¡E
| DEN
=
[TH]
—
un
>
>
ca
CELLULAR
BUILDING WIRELESS
© Wilson® Electronics
Say Goodbye fo Dropped Calls
IDEN Building Wireless Booster
il
a
EE
Ë
i
|
SUPPORTS
MULTIPLE
USERS
SUPPORTS
LARGE
BUILDINGS
SPECIFICATIONS
Part Number 804080
Gain (Rx/Tx) 70 dB
Frequency 851-869 MHz
Max Uplink Power 3020 mw
Max Downlink Power 26.91 dBm
Noise Figure 3 dB typical
Flatness +2.5 dB
Power Requirements 7 Y DC, 3 À max
Connectors N-Female 50 ohms
Dimensions 5.6 x 3.6 x 1.7 in/ 14.2x9?.1 x44cm
Weight 1.5 1bs / 0.7 kg
WilsonElectronics.com
800 MHz ¡DEN
"E
Versatile, Powerful Wireless Signal Boosters
for use in Large Buildings
The performance of IDEN phones can be compromised in many buildings
due to concrete, stucco, or metal walls that block the cellular signals
coming in and going out. To remedy that problem Wilson Electronics offers
the IDEN Signal Booster. Available in a 70 dB model, this indoor signal
booster supports multiple phones simultaneously and is compatible with a
wide vanety of Wilson indoor and outdoor antennas. The resulte A strong,
reliable cell signal where you need it, at home or at work.
INSTALLATION
FEATURES
« Significantly improves voice quality
« Works with all ¡DEN phones
* Extends phone battery life
« Automatic gain control up to 70 dB
« Gain indicator lights
* Shutdown on overload protection
« Up to 3-waît power amplifier
« FCC and IC Type Accepted
18 Toll Free 1-866-294-6996
800/1900 MHz
E
2% Wilson” Electronics
Say Goodbye to Dropped Calls
AG SOHO (Small Office / Home Office)
60 & 65 Wireless Boosters
Gr0G08 TA
SOHO Dual-Band Cellular Boosters — Perfect for Small
Offices, Home Offices, RV's and Buses
9 V
For users needing Improved cellular performance In a small office or home
office environment, Wilson Electronics SOHO boosters are great solutions.
Offering dual-band [800/1900 MHz) compatibility, the wireless SOHO
boosters support multiple cell phones and data cards simultaneously.
They can be paired with a wide variety of Wilson indoor and outdoor
antennas for a truly customized system. Depending on outside signal
strength, the SOHO can improve cellular strength in a single room or an
on
<
= =
=
entire home. ae
=
=
INSTALLATION a
=)
SUPPORTS
PARTIAL Es a |
HOUSE
Tm
LE
rm
=
<
=
mm
=)
mn
mn
LE)
| 21 |
cr
[m
o
SPECIFICATIONS FEATURES
SOHO 60 SOHO 65 * Ideal for small offices and rooms, RV's and buses =
AA is 801245 805045 ua
* Works on all generations of CDMA, TDMA, G5M and
Frequency 824-894 MHz / 1850-1990 MHz 3G technologies =
. » Adjustable gain control for optimal gain at almost =
Gain 55 dB / 60 dB 62 dB / 65 dB any location =
rm
Max Uplink Power 1200 mw / 1114 mw 1200 mw / 1114 mw « Optional kit available [841245/SOHO &0) =
Max Downlink Power 26 dBm / 25 dBm 26 dBm / 25 dBm * For 800 MHz and 1900 MHz Bands el
5 =
Noise Figure 3 dB / 4 dB nominal 3 dB / 4 dB nominal NEBEN on
* Oscillation detection and gain reduction
Flatness +5 dB co
* FCC and IC Type Accepted
== 6VAC/3A =
= MOX
Requirements <
Connectors FME-Male 50 ohms N-Female 50 ohms Me
—
Dimensions 5.6 x 3.6 х 1./in / 142x9.1 x 44 cm pue
Weight 1.5 165 / 0.7 kg E
LA
WilsonElectronics.com 1? Toll Free 1-866-294-6996
2 Wilson" Electronics 800/1900 MHz
E
Say Goodbye fo Dropped Calls
AG Pro 70” & AG Pro 75™ Cellular Boosters
OO
oo
С
—
с
oo
E
u
Le)
С
—
с
oo
AG Pro 70 & AG Pro 75 Cellular Boosters —
Highest Gain Solutions for Large Residential or
Commercial Buildings
The AG Pro 70 & 75 are dual-band, installer-friendly boosters
designed to provide a strong cellular signal inside a building.
The adjustable gain feature also simplifies installation by making
antenna placement less critical.
INSTALLATION
SUPPORTS
LARGE
BUILDINGS
LE
oe FEATURES
= s Ideal for large building installations
|
а « Configurable with a variety of Wilson cellular
= antennas to fit vitually any building installation
< * Adjustable gain control for optimal gain at almost
с any location
« The AG Pro /0 is a 70 ohm & the AG Pro 751s a 50 ohm
|
at « FCC and IC Type Accepted
—
—
—
—
[FW |
=> SPECIFICATIONS
ne Part Number 801265 801280
|
— Frequency 824-894 MHz / 1850-1990 MHz
a Gain 65 dB / 70 dB 70 dB / 75 dB
| = 3
ne Max Uplink Power 1200 mw / 1110 mw
то Мах Downlink Power 26 dBm / 25 dBm
= Noise Figure 3.5 dB nominal
= Flatness +5 dB
[m
— Power
Requirements 110-240 Y AC, 50-60 Hz, 8 W
= Connectors FFemale N-Female
[as
a Dimensions 5.7 x 4.2 x 1.5 in / 140 x 10.8 x 3.9 cm
Weight 0.48 Ibs / 0.22 kg
WilsonElectronics.com 20 Toll Free 1-866-294-6996
2 Wilson® Electronics 1700/2100 MHz
E
Say Goodbye to Dropped Calls
AWS 70 Cellular Booster (Band 4)
AWS 70 indoor signal booster improves performance
of phones, data cards, and tablets operating on the
AWS 1700/2100 band
The new AWS 70 from Wilson Electronics is an indoor signal booster
that provides consumers a strong signal and larger coverage ared
for devices operating on the Advanced Wireless Services (AWS)
1700/2100 MHz band.
This device supports multiple simultaneous connections. Wilson
sighal boosters feature cell tower protection technologies
developed over more than a decade of research and
development. These protections, many of which are not provided
by competing boosters, give peace of mind fo installers and
customers who don't have to worry about this booster causing
cell tower interference.
SUPPORTS
MULTIPLE
USERS
SUPPORTS
LARGE
BUILDINGS
ra
u
=
e,
Oo
с
©
À
BENEFITS
* Faster, cleaner data transfers for devices operating
on the AWS band
* Boosts signal for multiple devices simultaneously
* Provides a strong, reliable signal in weak signal areas
* Greatly reduces dropped connections
* Extends device battery life
SPECIFICATIONS FEATURES
* Provides a strong, reliable signal in weak signal areas с
; : =
Part Number 802365 » Separate adjustable gain controls for uplink (device- on
to-tower) & downlink [fower-to-device)
Frequency 1710-1755 MHz / 2110-2155 MHz » Configurable with a variety of Wilson antennas to fit —
virtually any building installation =
Gain 70 dB : E :
« Supports all devices — including smart phones, =
Max Uplink Power SOD data cards, tablets, mobile Wi-Fi hotspots - and a
technologies operating on the AWS 1700/2100 band
=
Max Downlink Power 22 dBm » РСС and IC Type Accepted и
«=
Noise Figure 3.5 dB nominal —
Flatness +5 dB oe
=
Power Requirements 110-240 Y AC, 50-60 Hz, 10 W
| = =]
Connectors N-Female >
=)
Dimensions 5.7 х 4.2 х 1.5 п / 14.0 х 10.8 x 3.9 cm wn
—
Weight 1.27 Ibs / 0.544 kg т
=
WilsonElectronics.com 21 Toll Free 1-866-294-6996
% Wilson* Electronics 700 MHz
Say Goodbye fo Dropped Calls
AG-V LTE 700 Indoor Cellular Booster (Band 13) Verizon
Improve Verizon Wireless™ LTE Device
Performance in Large Buildings
The 4G LTE 700 (801865) from Wilson Electronics is a professional
grade signal booster that provides a strong signal and larger
coverage area for Verizon Wireless™ LTE-capable devices inside
a building. This booster delivers faster data transfers in weak-
signal areas.
NEW PRODUCT
Providing gain up to 70 dB, the 4G LTE 700 signal booster is ideal
for office buildings with weak, unreliable Verizon Wireless LTE
signal. The booster supports multiple simultaneous connections
and includes very fast oscillation sensing technology. It also
features cell tower proximity detection and auto-shutdown
in addition to other cell tower protection safeguards. These
features make it the safest consumer 4G signal booster
available. The model works with all LTE devices operating on
BENEFITS the Verizon Wireless 700 MHz network.
* Faster, cleaner data transfers for Verizon Wireless 4G
LTE phones, data cards and tablets
SUPPORTS
LARGE
BUILDINGS
-
>
||
=
[TH]
—
Verzon Wireless Is a trademark of Verzon Trademark Services, LLC
* Boosts signal for multiple devices simultanecusly
13)
* Provides a strong, reliable signal in weak signal areas
* Greally reduces dropped connections
« Extends device battery lite
(BAND
|
[TE |
> SPECIFICATIONS FEATURES
o * Provides a strong, reliable signal on the Verizon
pa ae mE Wireless 4G LTE band even in weak signal areas
co « Separate aodjustable gain controls for uplink (device-
Frequency 776 - 787 MHz (Band 13) to-tower) & downlink [tower-to-device)
= Gain 70 dB . Configurable with a variety of Wilson antennas to fit
virtually any building installation
—
= Max Uplink Power 740 mw * FCC Type Accepted
— Max Downiink Power 25 dBm * Supports all LTE-capable devices operating on
— Verizon Wireless 700 MHz network (Band 13)
pel Noise Figure 3.5 dB nominal
L
Flatness +5 dB
[m
= Power Requirements 110-240 V AC, 50-60 Hz, 10 W
es Connectors N-Female
= Dimensions 5.7 х 4.2 х 1.5 п / 14.0 х 10.8 x 3.9 cm
= Weight 1.27 Ibs / 0.544 kg
WilsonElectronics.com 22 Toll Free 1-866-294-6996
2 Wilson® Electronics 800/1900 MHz
E
Say Goodbye to Dropped Calls
AG Pro-Installer Signal Booster
the AG Pro-Installer cellular signal booster designed for
professional installation in large buildings
The AG Pro Installer from Wilson Electronics is a wireless dual-band booster
that provides a strong cellular signal for a large coverage area inside a
building. The adjustable gain controls on this booster allow the installer to
set separately the uplink [device-to-tower) gain and downlink [tower-to-
device) gain on both the 800 MHz and the 19200 MHz spectrum bands. This
allows the installer to optimize the booster's gain to match the requirements
ra
rm
=
2
о
=
Cc
O
À
of the building in which it is installed, and simplifies installation by making
antenna placement less critical.
The AG Pro Installer delivers up to 75 dB gain, Wilson's highest gain signal
Ee booster, to provide coverage for large buildings suffering from weak,
MULTIPLE
USERS
SUPPORTS
LARGE
BUILDINGS
ADJUSTABLE GAIN ON \
UPLINK & DOWNLINK
unrelable signal. This device supports multiple simultaneous connections
and works with all cellular devices operating on all North American 800
and 1700 MHz networks.* Like all Wilson signal boosters, it features cell tower
INSTALLER BENEFITS protection technologies refined over more than a decade of research and
« Optimal up-sell for residential and commercial development. Unlike other signal boosters that cover only a single wireless
installers spectrum band and cost thousands of dollars more, the AG Pro Installer
» Customers will rave about strong, reliable signal delivers dual-band performance, high gain, and high value.
and faster, cleaner 3G data transfers
*except Nextel iDEN
=
Ге
"E
=
=)
SPECIFICATIONS FEATURES НЫЕ
al
* Separate adjustable uplink & downlink gain controls Li
Leas burbs ik for 800 MHz & 1900 MHz bands —
Power Output by Frequency 800 MHz 1900 MHZ * Provides a strong, reliable signal even in weak signal oo
areas 2
Max я Г ани
ado dias e « Amplifies any 2G or 3G signal on North American FE
w
Max Downlink Power 26.0 dBm 25.2 dBm 800 & 1900 MHz cellular networks pe
« Configurable with a variety of Wilson cellular
Gain 70 dB at 800 MHz & 75 dB af 1700 MHz antennas and inline signal boosters to fit virtually en
any large building installation =
Noise Figure 3.5 dB nominal cy
» FCC and IC Type Accepted =
Flatness +5 dB
=
Power Requirements 110-240 V AC, 50-60 Hz, 8 W 7
Connectors N-Female ba
=)
Dimensions 5.7 х 4.2 х 1.5 п / 14.0 x 10.8 x 3.9 cm o
LA
Weight 1.27 Ibs / 0.544 kg
—
rm
=
WilsonElectronics.com 23 Toll Free 1-866-294-6996
800/1900 MHz
"E
% Wilson” Electronics
Say Goodbye fo Dropped Calls
In-Line Booster
>
=
и
=
=
a.
т
<
N-LINE
Варезе Сай Signal Beale
Dimension:
Weight
Part Number 806215
Frequency 800 / 1900 MHz
Gain 17 de / 17 dB
Max Uplink Power 0.4 mw / 0.6 mw
eo Max Downlink Power 26 dBm / 25 dBm
zo Noise Figure 3.5 dB / 6 dB nominal
|
en Flatness +2 dB
oO Power
= ee are 6 М АС / 1.5 А пах
Do Connectors N-Female 50 ohms
5.7 х 4.2 х 1.5 п
14.0 х 10.8 х 3.9 cm
1.27 lbs / 0.544 kg
WilsonElectronics.com
The 806215 booster helps installers and integrators
overcome signal loss issues that often occur with
booster installations in larger buildings
The new Wilson In-line booster addresses a common need of signal booster
installations in larger buildings by restoring up to 17 dB of gain that may be
lost due to long runs of connecting cable or by the use of signal splitters
to accommodate multiple antennas. The In-line booster complements
Wilson's line of professional grade cellular boosters, providing installers and
integrators with booster system solutions for buildings of any size and for
installations from the simplest to the most complex.
FEATURES
» Separate adjustable gain controls
* Provides up to 17dB gain to compensate for signal loss
« Compatible with all 800 & 1900 MHz cellular networks® — 2G & 3G
« Configurable with a variety of Wilson signal boosters to fit virtually any
large building installation
« FCC and IC Type Accepted
INSTALLER BENEFITS
« Natural up-sell for residential and commercial installers
« Maintains strong, reliable signal even after long cable runs
» Allows installation of multiple inside antennas with minimal signal loss
« Simplifies complex installations in larger buildings
« Compatible with Wilson antennas and signal boosters
24 Toll Free 1-866-294-6996
Keeping Your Machine-to-Machine
Devices Connected
A Wilson Electronics cellular booster provides
two primary benefits for Machine-to-Machine
connected devices:
* Assures a strong, reliable signal can be acquired
and maintained - even in weak signal areas
* Reduces data error rates from weak signal,
resulting in quicker transfers
Пу |
WWW.WILSONM2M.COM * PHONE: 866-839-92407 * [email protected]
WilsonElectronics.com 25 Toll Free 1-866-294-6996
811225
-
=
=
=
>
eE
т
a
DIRECT CONNECT CELLULAR BOOSTER
ATAPRO™
© Wilson® Electronics
Say Goodbye fo Dropped Calls
800/1900 MHz
WES
DataPro'M Direct Connect Cellular Booster na
FEATURES
M2M Market
The machine-to-machine (M2M) or connected device universe is
sometimes called the Infemet of Things because devices communicate
with each other over wired or wireless connections and share data without
direct human intervention. Juniper Research has forecast the number of
wireless M2M devices will grow to 412 million by 2014. Growth will be led by
utility metering, mobile connected buildings, telematics, and automated
retail and banking connections, according fo Juniper.
A significant percentage of M2M devices will continue for the foreseeable
future to rely on wireless networks that now exist. In locations where cellular
signals are weak due to distance from the cell tower, Terrain features, or
building matenals like concrete and steel, the DataPro Direct Connect
provides a strong reliable signal, ensuring successful data transfer.
» Bi-directional booster amplifies signal to and from cell tower
« Works on all camers on 800/1900 fregencies
« Configurable to fit virtually any M2M situation
« FCC and IC Type Accepted
SPECIFICATIONS
Part Number 811225
Frequency 824-894 MHz / 1850-1990 MHz
Gain 12 de / 12 dB
Max Uplink Power 1400 mw / 1860 mw
Max Downlink Power 0 dBm / 1dBm
Noise Figure 3 dB nominal
Flatness +3 dB
Power Requirements 5V DC, JA
Connectors SMA Female
Dimensions 3.3 х 1.9 х 8 п / 8.4 х 4.8 х 2.0 ст
Weight 0.18 Ibs / 0.082 kg
WilsonElectronics.com
INSTALLATION
ANTENNA
BOOSTER
CELLULAR
MODEM
BACK OF VENDING MACHINE ra
26 Toll Free 1-866-294-6996
% Wilson"
Electronics
Say Goodbye to Dropped Calls
GSM High Power Direct Connect
Cellular Signal Booster
SPECIFICATIONS
Part Number
Frequency
Gain
Max Uplink Power
Noise Figure
Flatness
Power Requirements
Connectors
Dimensions
Weight
811216
800 / 1900 MHz
12 dB / 13 dB
4170 mw / 3170 mw
3 dB / 4 dB nominal
+2 dB
7 V DC / 3 À max
SMA-Female 50 ohms
6.2 х 3.5 х 2.0 п / 15.8 х 8.9 х 5.1 ст
1.56 Ibs / 0.71 kg
WilsonElectronics.com
800/1900 MHz
BEC
Wilson Electronics’ GSM High Power Direct Connect
Cellular Signal Booster for M2M Installations
The GSM High Power Direct Connectis a signal booster developed specifically
for M2M installations. This direct connect configuration delivers a strong,
reliable signal for cellular modems, ensuring the successful transfer of critical
data. It's based on the same field tested, market-proven technology that
powers Wilson's cellular signal boosters for the consumer market. The dual-
band GSM High Power is ready to integrate with GSM modem installations
to provide strong, reliable cellular signal that ensures successful M2M data
transfer. This booster works on all GSM networks operating on 800 MHz and
1900 MHz frequency bands.
Integrators and OEMs can pair the GSM High Power with a variety of expertly
designed Wilson Electronics cellular antennas for maximum system gain to
overcome a weak signal. The GSM High Power also incorporates power
control logic that ensures maximum output power is within cellular network
standards and will not interfere with a cellular network.
BENEFITS & FEATURES
* Boosts both signal coming from the cell site, and the signal going back
« Strong, reliable signal even in remote locations or other weak signal
areas
* Less resending of data due to poor connection means faster data
transfers
« Compatible with all GSM cellular technologies
+ Can be pared with a variety of Wilson Hectronics cellular antennas
« FCC and IC Type Accepted
« Configurable to fit virtually any M2M installation
INSTALLATION
y [oueside Antenna )
27 Toll Free 1-866-294-6996
LIN dOYd MEN
LE]
LT
==
=
oa
= =
“=
©
=
Fr
p= = |
| = |
== |
Fr
<
—
€
<>
—
—
rm
<
—
<
rm
|
|
[|
|
№ =
== |
cr
a»
—
=
|
| == |
<>
|
Le 2)
—
FA
=" |
© Wilson® Electronics
Say Goodbye fo Dropped Calls
Direct-Connect Boosters
FEATURES
* Improves voice and data signal quality
—
-
с
—
—
со
—
—
CO
I~
—
—
CO
—
—
OO
су
—
—
CO
* Improves data communication rates needed for 3G technologies
* Power control logic ensures maximum output power is within cellular
network standards
Cuil GPS Pues Through tor EM PA * Automatic gain control
- E. EN HE: 1850-1556 MS
E
* Advanced electronics recelve and transmit better than a cell phone or
ol cellular data card
Single-User
811201 pre « Connectïs directly to cell phone or data device with a Wilson antenna
adapter
* Mobile, marine and building Use
« Greaîïlyv reduces disconnecis, drop-outs, and noise
* Transmits signal energy to the outside antenna
« 3 walt power signal booster
« Active GPS bypass
811701 / 811901
WilsonElectronics.com
SPECIFICATIONS
Part Number 811201 811701 811901
Frequency (MHz) 824-894 MHz / 1850-1990 MHz 890-960 MHz / 1710-1880 MHz 890-960 MHz / 1520-2170 MHz
a Gain 20 dB 20 dB
D
ит Max Uplink Power 2240 mw / 930 mw 3000 mw / 1830 mw
=
[+ 5)
= Max Downlink Power 0 dBm / 0 dEm
<>
Noise Figure 3.5 dB nominal
co
E Flatness +2 dB
<>
—- Power Requirements 12 V, 0.5-1.5 À max
=—
„= Connectors FME-Male 50 ohms
<>
а Dimensions 5х 3.5 х 1.2 п / 12.70 х 8.9 х 3 ст 5.4 х 4.7 х |.4in / 140 x 11.9 х 3.5 cm
|
Зи Weight 1.03 Ibs / 0.468 kg 1.32 Ibs / 0.6 kg
[FW |
D
f=
28 Toll Free 1-866-294-6996
Antenna Options
Pages 32-39
* Mini Magnet-Mount Antenna
* Directional Yagi Antenna
* Magnet-Mount Antenna
* Trucker Anfenna
* Marine Antenna
Optional Accessories
Page 42-44
* Coax Cable Extension
* Lightning Suppressor
* Surge Protector
Mobile Antenna Options
Pages 32-35
« Mini Magnet-Mount Antenna
* Magnet-Mount Antenna
* Trucker Style Antenna
* NMO Antenna
800/1900 « 700/1800 * 700/2100 MHz
MEE
ANTENNA
BOOSTER
CELLULAR
MODEM
BACK OF VENDING MACHINE
Optional Accessories
Pages 44-45
* Coax Cable Extension
* Hardwire Power Supply Kit
WilsonElectronics.com 29
Toll Free 1-866-294-6996
L06LL8/ LOLLLB/ LOCLLS
L=
== |
rm
<»
—
A
€
«<
pa
„=
rm
<»
—
S431500¢8
KIT PART
NUMBER
801201
801212
811210
811211
811214
841246
DPTIONAL KIT
OUTSIDE SIGNAL INSIDE
ANTENNA BOOSTER ANTENNA
CHOICE OF
Е ANTENNA
> SOLD
SEPARATELY я
801201 301127
I
I
301103 801201 301127
CHOICE OF
— ANTENNA
|__|
SOLD
SEPARATELY
|
|__|
301113 811210 301143
|
|__|
301103
301146
|
+
MARINE |
308430 801245 301135
WilsonElectronics.com 30
UL
MOBILE WIRELESS
Wilson Electronics has taken its most popular
signal booster, the Dual-Band Mobile Wireless,
and combined it with several other top-selling
components to create two rugged high-
performance kits.
» The 801201 features Wilson's Low Profile inside
vehicle antenna and is designed for users who
want to choose their own outside antenna.
* For plug-and-play convenience, the 801212
includes the Low Profile intenor antenna along with
Wilson's best-selling 12-inch Magnet-Mount outside
antenna, an ideal combination for passenger cars,
vans and light trucks.
SIGNALBOOST™
Wilson Electronics affordable SIGNALBOOST™
amplifier is the perfect choice for the user looking
to improve cellular signals for a single cell phone
or data card on the road or indoors. The Ultra-Slim
Antenna attaches to any phone or data card — no
equipment-specific adapter is required.
« The 811210 is the basic SIGNALBOOST™ kit and is
designed for users who prefer to select their own
outside antenna.
» Compact mini magnet-mount antenna is included
with the 811211. It attaches quickly and easily to
a vehicle roof or to the optional window-mount
bracket for building use.
* For a hands-free mobile application, the 811214
features the Cradle Plus. Acting as a signal coupler,
the Cradle Plus transfers the signal between the
phone and the signal booster and is compatible
with any hands-free device.
NOTE: 811710 & 811910 can also be put into kits upon
request.
MARINE KIT
*|deal kit for use in a boat
Toll Free 1-866-294-6996
OPTIONAL KIT
KIT PART
NUMBER
815225
815226
815126
801240
801241
801242
WilsonElectronics.com
OUTSIDE
ANTENNA
CHOICE OF
ANTENNA
SOLD
SEPARATELY
301126
301126
CHOICE OF
ANTENNA
SOLD
SEPARATELY
301125
301126
SIGNAL
BOOSTER
815225
815225
815125
AG-V
801240
801240
801240
DVIPONENT
HOME
ACCESSORY
KIT
}
o
1
31
SLEEK® & SLEEK® 4G-V
CELLULAR SIGNAL BOOSTERS
Wilson Electronics Sleek® improves both voice and data
performance on-the-go. With more than 20 times the
power to the cell tower of a cell phone alone, it features
a built-in antenna, battery charging port and works with
Cellular (800 MHz) and PCS [1900 MHz) frequencies.
The Wilson Electronics’ Sleek Signal Booster kit (8152248)
includes:*
* Sleek all-in-one cradle and signal booster
* Outside vehicle mini magnet-mount antenna
* Power adapter**
* 30-day money-back guarantee
* One-year product warranty
*Ii-Home accessory kit (859970) available
** Use only with Wilson power supply
SIGNALBOOST™ MOBILEPRO®
Unique to the industry, the SIGNALBOOST™ MobilePro®
is an affordable, compact and portable signal booster
system designed to improve cell phone and data card
performance for people on the go. The slim booster unit
incorporates a buill-in inside antenna and packs more
than 20 times the power of a cellphone alone. For added
versatility, it can be powered through a computer USB
port, a vehicle power adapter or a standard AC wall
outlet. Two plug-and-play kits are available.
« The 801241 includes everything needed for improved
cellular performance on the road and indoors. The
package includes the booster itself, along with Wilson's
popular 12-inch magnet-mount antenna, a suction-cup
window bracket, all power options, and a convenient
camying case.
* For users desiring a lower profile antenna, the 801242
replaces the 12-inch magnet-mount antenna with our
four-inch mini magnet-mount antenna.
Toll Free 1-866-294-6996
301101 / 301701 / 301119 / 301130 / 301133
HIGH-GAIN ANTENNAS
2 Wilson" Electronics
Say Goodbye fo Dropped Calls
High-Gain Antennas
| A
EL
| 8
pi
5/8-inch x 7-inch Threaded mounting rod spans the distance between roof and headliner
301101 / 301701 Trucker Mirror-Mount Antenna
19-inch fiberglass mast raises antenna above trailers
301119 RV / Trucker Roof-Mount Antenna
WilsonElectronics.com
Rugged, High-Gain Antennas
Deliver Powerful Performance
Professional drivers demand top performance from their
equipment. Wilson provides just that with its line of Trucker, RV
and Marine antennas. Available in four models for alternative
installations. These antennas offer the highest allowable gain,
dual-band versatility (8000/1900 MHz) and omni-directional
design. Engineered specifically for trucks, RVs and marine
applications, these popular antennas can also be used for
fxed installation on buildings.
=
Wilson
SETE они
ENTE (NE E ®
TTT TAT aT
301133 RV / Trucker Spring-Mount Antenna
Built-in spring reduces impact damage
301130 Marine Antenna
Weatherproof and waterproof
32 Toll Free 1-866-294-6996
FEATURES
* Mobile, marine and building use
* No ground plane required
Built-in ground plane allows for use on any surface -
metal, fiberglass, wood, etc.
+ 19-inch fiberglass mast raises antenna above
obstructions (301101)
* Mounting options available for any application
SPECIFICATIONS
Part Number 301101 301701
Frequency
Range
Impedance
Antenna Gain
Signal Pattern
Polarization
Ground Plane
Connector
Whip - Stainless Steel
Material Extension - Fiberglass
Coax Cable RG58 - 10.5 feet / 3.2 meters
Height 32.0625 inches / 81.45 cm
18 inches
(24 inches including threaded mount)
800/1900 * 700/1800 MHz
SE
signal Patterns
H - Plane € 850 MHz
H - Plane @ 1920 MHz
301119 301133 301130
Refer to table on page 40
50 ohms
Refer to table on page 40
Omni
Vertical
Built-In Ground Plane
FME Female
Whip - Stainless Steel
Whip - Stainless Steel Casing - Fiberglass
RG58 - 13.5 feet / 4.115 meters RG58 - 7 inches
21.5 inches including spring
mount / 54.61 cm
21 inches / 53.3 cm
(including coupler)
; 5/8-inch x 7-inch Threaded 3-Way Mount with Spade Stud :
Mount Standard CB 3/8-inch x 24 Thread Mounting Rod Part# 901104 Standard 1-inch x 14 thread
WilsonElectronics.com 33 Toll Free 1-866-294-6996
EELLOE / OELLOE / GLLLOE / LOZLOE / LOLLOE
SYNNILNVY NIVO-HOIH
301103 / 301125 / 301128 / 301703 / 304202 / 301113 / 301126 / 301131 / 301132
EXTERNAL ANTENNAS
MOBILE
GENERAL
2 Wilson" Electronics
Say Goodbye fo Dropped Calls
General Mobile External Antennas
Stay Connected on the Road with
Wilson Electronics Mobile Antennas
Designed for use with cur mobile signal boosters, Wilson
Electronics wide range of mobile antennas offers top
performance and multiple mounting options. Cur
best-selling magnet-mount antennas install in seconds
and are transferable between vehicles. For a more
permanent installation, users can choose from glass- or
NMO-mount options.
FEATURES
* Perfect for cars, vans and light trucks
* Mobile and indoor use
SPECIFICATIONS
Magnet-Mount Antennas
Part Number No 103 301125 301128
Frequency
Range (MHz)
Impedance
Antenna Gain
Signal Pattern
Polarization
Ground Plane
Cy
q
o
с
т
©) ey
o ©)
ps —
— —
o o
en Эс
. . С
eo E
“о со ©
F= =
о © о <
m ® "=
. LC . >
az 8 2
eo
= с = =
= = = +
o o o v
© = me
LU a a ©
m © m 2
о с — =
— с ™ cam
В D qe =
© = 9 =
Mini Magnet-Mount Antennas
301703 304202 301113 301126 ee Ur
WHITE WHITE
Refer to table on page 40
50 ohms
Refer to table on page 40
Omni
Vertical
Metal ground plane required
Connector FME Female SMA Male TNC Male FME Female FME Female aie SMA Male FMEMale N Male
Material Whip - Stainless Steel Whip - Plastic Coated Steel Wire
Coax Cable RG174- 10 feet / 3.05 meters
Height 12.25 inches / 31.12 cm 4.175 inches / 10.60 cm
Mount Rare earth magnet Rare earth magnet
WilsonElectronics.com
34 Toll Free 1-866-294-6996
800/900 MHz - 800/900/1800/1900 MHz
EEE
Same styling as our popular trucker antenna for NMO mounting
Glass-Mount & Mini Glass-Mount Antennas
==
301104 * 304203 » 301105 NMO Antennas
D
с
с
5 2
с
= es <
=
= $
+ — U
== 2
a [=
= = О
o +=
© С =
. =
8% 0
т — Fr=
— D у
380 de: A
Glass-Mount & Mini Glass-Mount Antennas Eu NMO Antennas
Antennas
301102 304201 301114 301112 301104 304203 301105
Refer to table on page 40
50 ohms
Refer to table on page 40
Omni
Vertical
Built-in Ground Plane Metal ground plane required
FME Female Sold Seperately
Whip - Stainless Steel Whip - Plastic Coated Steel Wire Whip - Stainless Steel
RG58 - 14 feet / 4.27 meters sold separately sold separately
15 inch / 38.10 cm 5.375 inch / 13.65 cm 13.25 inches / 33.7 cm 13.88 inches / 35.3 cm
Glass mounting with NMO Mount Types
IM™ adhesive (see NMO mount options on page 41)
WilsonElectronics.com 35 Toll Free 1-866-294-6996
GOLLOE / COCVOE / FOLLOE / CLLLOE / VLLLOE / LOCHOE / COLLOE
TYNY¥3ILXT 12311/80N TVWINA195
SYNNILNY
301127 / 301143 / 301149 / 301208 / 301209 / 301210
ULTRA-SLIM ANTENNAS
AND
PROFILE
LOW
; ; ; 800/1900 MHz * 900/1800 MHz
2 Wilson” Electronics 200/2100 MHz
Say Goodbye fo Dropped Calls
Low Profile 8: Ultra-Slim Antennas NEE
- ea
[i Lr
1 PL ALU PE ti
UP Fes
К aM м ШИ IAG =
FEATURES
* Low profile antennas for discreet installation A
NN
TTT
* Includes mounting options
signal Pattems Signal Patterns
301127, 301143, 301149 301208, 301207, 301210
Omni-directional when H - Plane @ 806-874 MHz
mounted vertically H - Plane @ 1850-19%0 MHz
H - Plane @ 850 MHz
H - Plane @ 1920 MHz
301208
301209
301127 301210
301143
301149
SPECIFICATIONS
Part Number 301127 301143 301149 301208 301209 301210
Frequency Refer to table on page 40
Impedance 50 ohms
Antenna Gain Refer to table on page 40
Signal Pattern Omni when mounted vertically 120° H Plane
Polarization Vertical
Connector FME Female SMA Male FME Female TNC Male SMA Male
Coax Cable КС174- 14 НП / 4.27 тп RG1/4-51ft/ 1.524 m
Length Sin. / 12.7 cm 3.25 in. / 8.26 cm 5.13in/ 13cm
Width 1.5in/3.8cm 1.56in/4cm
Building Mount Minimum é inches away from metal
WilsonElectronics.com 36 Toll Free 1-866-294-6996
© Wilson® Electronics
Say Goodbye to Dropped Calls
Cradle Plus Antennas
Hands-Free Safety and Convenience
Wilson Electronics innovative Cradle Plus features a built-in inside antenna
that works with Wilson SIGHNALBOOST™ amplifiers. When placed in the
Cradle Plus, a cell phone benefits from the maximum possible signal
improvement from the booster system, due to the proximity of the built-in
antenna.
FEATURES
« Compatible with all cell phones and data cards
* Increases driver safety
* Supports any hands-free device, including ear-buds and Bluetooth®
products
* Adjustable to fit any cell phone or MiFi® card
« Multiple mounting options: console, dashboard or windshield
* Installs in minutes
SPECIFICATIONS
Part Number 301146 301148
Frequency Range Refer to table on page 40
Impedance 50 ohms
Antenna Gain Refer to table on page 40
Connector FME Female SMA Male
Coax Cable RG 174-7.5ft
Length 4.125 in / 10.5 cm
Width 2.873545 in / 7,3-11.4 cm
WilsonElectronics.com 37
800/900/1800/1900/2100 MHz
EEE
Signal Patterns
H - Plane @ 850 MHz
H - Plane @ 1920 MHz
Toll Free 1-866-294-6996
8rLLOE/ OFLIOE
SYNNILNY SANId 370YA39
301111 / 301129 / 301142 / 301124 / 304411 / 304475
DURABLE, HIGH-GAIN, DIRECTIONAL ANTENNAS
ANTENNAS
YAGI
% Wilson* Electronics 800 * 800/9700 + 900 MHz a
Say Goodbye fo Dropped Calls
Yagi Antennas - Durable, high-gain, directional antennas
301111 Yagi 800 MHz
Our highest gain antenna for
the 800 MHz band
301129 Yagi 800 MHz
301142 Yagi 900 MHz
Lower profile
for 800 and 900 MHz
E 7 =| 301124 Yagi 1900 MHz
\ | J Our highest gain antenna for
o” >< -| the 1900 MHz band
va |] 30447575 ohm
eles hey 304411 50 ohm
a. Looe”) Wide Band
a | AAT Directional Antenna
SPECIFICATIONS
Yagi Log-Periodic
Part Number 301111 301125 301142 301124 304411 304475
Number of Elements 5 5 9 9
Frequency Refer to table on page 40
Impedance 50 ohms 75 ohms
Antenna Gain Refer to table on page 40
Max Power 50 watts 10 watts 25 watts 100 watts
Directional
Polarization Vertical
Connector N-Female F-Female
Material Aluminum
Lengh ed Comme a ra UT сотен E.
: [with mount)
Weight 2.9 ounces f 0.081 kg (with mount) 3.0 ound kg т cin
Mount Mounts on pipe with 0.5 inch to 1.5 inch diameter
Wind Surface Area <100 cm2 <465 ст?
Brackets Max OD 2 inches
WilsonElectronics.com 38 Toll Free 1-866-294-6996
© Wilson® Electronics
Say Goodbye to Dropped Calls
Building Antennas
FEATURES
+ Built-in ground plane
* Mounting hardware included
« For fixed installations
301121
301151
301123
Inside Antennas
800/1900 *« 800/700 MHz 800/2100 MHz
E
Signal Patterns
Panel Antennas when
mounted vertically
H - Plane @ 806-894 MHz
H - Plane @ 1850-1990 MHz
50 ohm & 75 ohm
301135 & 301155 wall mount
304451 & 304471 ceiling mount
304452 & 304472 window mount
304453 & 304473 weatherproof 301141
Signal Patterns
Omni-directional when
mounted vertically
H - Plane (2 850 MHz
H - Plane @ 1920 MHz
301201
301202
Outside Antennas
é dBi / 9 dBi
Dome Panel Omni
304471 301135
Part Number 301121 301151 301173 304451 301155 3011.41 304452 304472 301201 301202
S04473 S04453
Frequency Refer to table on page 40
Impedance 50ohms 75ohms 50 обл S0ohms X“fsSchms 50chms 750hms 50hms £50ohms Xx5ohms “5o0hms 50 ohms
Polarization Vertical TUE a E Vertical vertical
Antenna Gain Refer to table on page 40
Max Power 50 watts 15 watts 50 watts 25 watts
Beamwidth 360° 70° 80° 100° 70°/40° 340°
Hor. Plane
Beamwidth 120° 50°/45° 100° 50°/45° 60°
Ver. Plane
E 3 2.0:1 (800) 4 E
VSWR 1.5:1 1.5:1 re 1 900) 1.5:1 1.8:1
Connector N-Female FFemale MN-Female N-Female | F-Female N-Femdle FFemale FFemae NFemale F-Female FME-Female
DI . Diameter 8 inches / A 8.27 x 7.09 x 1.73 inches 7.75 x 4.38 x 2.63 inches en
Нева 20.32 ст Le NIE 21 x 18 x 4.39 cm 19.7 x 11.1 x 6.7 cm Hans
719.6 ст
Ground Plane Built-In Ground Plane Hare Built-in Ground Plane Built-In Ground Plane
Front to Back 11/14 dB
Ratio Fi a N/A N/A
WilsonElectronics.com 39 Toll Free 1-866-294-6996
cocLO£ / LOCLOE / L7LLOE / ZSLLOS / SSLLOE / SELLOE / VELLOE / ECLLOE / LSLLOE / LCLLOE
SYNNILNY ONIQTINE
FREQUENCY SPECIFIC GAIN CHART (DBI)
ANTENNA
CELLULAR DATA CARDS
© Wilson® Electronics
Say Goodbye fo Dropped Calls
Antenna Frequency Specific Gain Chart (dBi)
FREQUENCY IN MHz
700-800
MAGNET MOUNT ANTENNAS 301103 1.9
301125 1.9
301128 1.9
304202 1.9
301703 -19
MINI MAGNET MOUNT ANTENNAS 301113 1.7
301126 1.7
301131 1.7
301132 1.7
DUAL BAND TRUCKER ANTENNAS 301101
301701
RV TRUCKER WISPRING ANTENNAS 301119 31
301133 31
GLASS MOUNT ANTENNAS 301102 1.8
304201 1.8
MINI GLASS MOUNT ANTENNAS 301114
NMO ANTENNAS 301104 20
301112 24
304203 37
301105 41
DUAL BAND LOW PROFILE ANTENNAS 301106 34
301127 34
301208 0.8
301209 0.8
YAGI ANTENNAS 301111 10.0
301124 -18.7
301129 09
301142 -36
304411 73
304475 7.3
DOME ANTENNAS 301121 -25
301123 33
MARINE ANTENNAS 301130 34
PANEL ANTENNAS 301135 5.2
301155 5.2
304451 5.2
304471 5.2
304452 5.2
304472 5.2
304453 5.2
304473 5.2
301157 5.2
ULTRA SLIM ANTENNAS 301143 5.7
301149 5.7
CRADLE PLUS - PHONE CRADLE 301146 5.7
301148 5.7
EXTERIOR BUILDING ANTENNAS 301141 0.7
301201 32
301202 32
Cellular Data Cards
Adapter plugs info the adapter port on the
end of the cellular data card or plugs in as
an antenna replacement for data cards with
this feature. Check the model for a specific
adapter type.
For information about Wilson's cellular
adapters for modems and data cards visit
www. WilsonElectronics.com
WilsonElectronics.com
40
824-894
880-960
1710-1880 1850-1990 2110-2170
4.0 6.1 3
4.0 6.1 23
4.0 6.1 23
4.0 6.1 23
0.3 41 0.6
22 3.1 1.4
22 3.1 1.4
22 3.1 1.4
22 3.1 1.4
6.1
6.1
-1.8 5.1 26
-1.8 5.1 2.6
-15 48 1.0
-1.5 48 1.0
24
-3.1 5.9 1.3
1.2 55 1.7
4.1 3.7 0.3
-35 -7.0 10.2
14 3.2 43
14 3.2 43
24 34 1.2
24 34 1.2
-16.4 -14 9 -13.8
9.1 125 10.6
-10.3 -11.9 -8.7
-12.1 10.2 134
92 10.6 104
92 10.6 10.4
35 41 15
4.3 05 -8.0
31 5.1 0.2
10.1 10.6 8.2
10.1 10.6 8.2
10.1 10.6 8.2
10.1 10.6 8.2
10.1 10.6 8.2
10.1 10.6 8.2
10.1 10.6 8.2
10.1 10.6 8.2
10.1 10.6 8.2
31 3.9 50
31 39 5.0
31 39 50
31 3.9 50
1.7 55 47
0.6 5.1 5
0.6 5.1 -1.5
Toll Free 1-866-294-6996
© Wilson® Electronics
Say Goodbye to Dropped Calls
Mounts & Replacement Parts
7 = LA
en ec
dé 4 Ч > >,
| |
+ ?
E A
701101 NMO TRUNK MOUNT
E Requires NMO Antenna (sold separately)
E 14 feet RG-58U Cable
E FME-Female Connector
E Aftaches on the lip of a trunk Па or similar
surface
701102 3/4-inch NMO Mount
E Requires NIMO Antenna (sold separately)
E Requires 3/41nch hole in sheet metal
surface for connection
E 14 feel RG-58U Cable
E FME-Female Connector
701103 3/8-inch NMO Mount
E Requires NIMO Antenna (sold separately)
E Requires 3/81nch hole in sheet metal
surface for connection
E 14 feel RG-58U Cable
E FME-Female Connector
201119 Marne Antenna Mount
E For use with the Marine Antenna to mount
on various surfaces
mB Features standard 1 inch x 14 threaded
mount
701104 3-Way Mount with Spade Stud
Eu Compatible with Wilson Electronics Cellular
Trucker Antennas (301101) and (301133)
Mm 3/8-24 thread
ME 5 millimeter chrome-plated aluminum
E Hardware included
701106 Horizontal Mount with Spade Stud
E Compatble with Wilson Electronics Trucker
Antennas (301101) and (301133)
mW 3/8-24 thread
Eu 5 millimeter chrome-plated aluminum
E Hardware included
701128 Window-Mount Antenna Bracket
E For use with Magnet-Mount and Mini
Magnet-Mount Antennas
Mm Suction cups attach to inside surface of
window; antenna mounts on horizontal
platform
857731 Ground Plane
E For use with Magnet-Mount and Mini
Magnet-Mount Antennas
E White metal, 3.5 inches in diameter
WilsonElectronics.com
41
701133 Omni Antenna Building Mounting
Bracket
E Allows for edsy mounting of the Omni-
drectional Antenna (301201, 301202) оп fhe
outside of a building.
m Includes hardware for mounting on a pole,
fascia, roof, wall, efc.
701125 In-Ceiling Dual-Band Dome Antenna
Bracket
E Compatible with the Wilson Dual-Band Dome
Antenna (301121 & 301123)
| Allows for mounting the dome antenna in the
айс.
701123 In-Wall Panel Antenna Mount
E Compatible with the Wilson Panel Antenna
(301135, 301155).
Mm Bracket can be inserted info an interior wall.
Mm Features a paintable cover.
304447 Panel Antenna Upgrade Kit for the
Desktop Amplifier
Mm Includes Panel Antenna, 20° white RGé coax
cable, N-male to F-female & F-female to
TNC-male connectors.
701117 Antenna Pole Mounting Assembly
E Includes
U-Bracket assembly
Wall mount bracket
10" Length x 1.5" Diameter Aluminum Tube
701130 Cup Holder Car Mount for use with
Wilson MobilePro, Cradles & Cradle
Boosters
701132 Adjustable Suction Cup Car or Table
Mount for use with Wilson MobilePro,
Cradles & Cradle Boosters
701137 Adjustable desk mount for use with
Sleek, MobilePro, iBooster, C-Booster
and U-Booster
701134 Cradle Mounting Kit
701120 Gooseneck Suction Cup Mount
Toll Free 1-866-294-6996
$SLUÜVd ININIIVIdIA Y SENNON
COMBINER/DIPLEXER
PROTECTION
SPLITTERS + LIGHTNING
TAPS
% Wilson” Electronics
Say Goodbye fo Dropped Calls
-/0 dB —
N Female
N Female
F Female
F Female
F Female
N Female
N Female
N Female
When to use taps
For use in signal
distribution systems to split
the amplified signal for
multiple inside antennas
with minimum signal loss or
for controlling the amount
of signal to small and large
areas. Features low-loss
signal throughput with one
-6 dB or -10 dB tap.
When to use splitters
For use in signal
distribution systems to split
the amplified signal with
minimum signal loss. Equal
amounts of signal sent
to multiple antennas for
similarly sized areas.
3d
-3 dB
SPLITTER
3d
-72 ОВ —
В |=
a”
в | —
* N-Female Connectors
* Attenuation less than 0.2 dB
* Frequency range up to 3 GHz
* Replaceable gas discharge element (859920)
* F-Female Connectors
* Attenuation less than 0.2 dB
* Frequency range up to 3 GHz
* Replaceable gas discharge element (859921)
* Each output port loses .5 dB
* 700-960 8 1710-2155 MHz LTE 700, Cellular, iDEN, GSM, AWS, PCS
-6 dB Tap
859906 700-960 MHz 50 Ohm
-10 dB Tap
859907 700-2500 MHz 50 Ohm
-10 dB Tap
859976 700-2500 MHz 75 Ohm
-3 dB Splitter
859993 700-2500 MHz 75 Ohm
4.8 dB 3 Way
859994 Splitter 75 Ohm
700-2500 MHz
-3 dB 2 Way Splitter
859957 700-2700 MHz 50 Ohm
-4,8 dB 3 Way
859980 Splitter 50 Ohm
700-2700 MHz
-6 dB 4 Way Splitter
857981 700-2700 MHz 50 Ohm
9 dB —— re
-10 dB \ J
-1.5 dB — -71.5dB— TAP _72 dB
-6 dB
TAP -10 dB = 7 -
-6 dB -— | -815 dB
-76 d
859902 50 Ohm Lightning
Surge Protector
859992 75 Ohm Lightning
Surge Protector
859922 Dual-Band
Combiner/Diplexer
WilsonElectronics.com
* N-Female Connectors
« Can connect two outside antennas to one signal booster or two
signal boosters to one inside antenna
42
Toll Free 1-866-294-6996
% Wilson” Electronics
Say Goodbye fo Dropped Calls
CONNECTORS
Male Male Male М Female FME Female N Female FME Male
Y f с a= Nf
Female Female Female Female Male
3 971103 \ 971104 \ 971105 \ 971106 \ 971107 Ln 971108
ar a E 4 xx / WN 7
© © © > ©
Male Tera Male N Male pt a alias FE SA FME Female FME Female
97110 971113 971117 971119 971121 | 971127
‘ BA
= —
© ©
F Female F Female
O ©
F Female M Male Ei rue Female Pere
\ 971128 971129 971130 # \ 971132 \ 971136
CRIMP CONNECTORS
F
ss — e = |
N Male Crmp TNC Male Crimp Mini UHF Male Crimp
Wilson 400 or RG Bu Cable for RG 58 Cable for RG 58 Cable
971109 971111 971112
he A
a ”
mm — à == — Les — — — EE —
FME Female Crimp FME Male Crimp N Male Crimp
for RG 58 Cable for RG 58 Cable for RG 58 Cable
971114 971115 971116
Ч а hy
~ - ~ - ~
Mini UHF Female FME Female Crimp Male SMA Crimp
Crimp for RG 174 Cable for RG 174 Cable for RG 58 Cable
971118 971120 971131
la. ke he
r ь
SMA Male Crimp
for RG 174 Cable
971139
Ч
WilsonElectronics.com 43 Toll Free 1-866-294-6996
SYOLIJINNOYI9
SYOLIINNOII АЙ!)
CABLES
COAXIAL
2 Wilson" Electronics
Coaxial Cables
Say Goodbye fo Dropped Calls
DETECTOR
THE CELLULAR DOWNLINK SIGNAL
PO RG58 Low-Loss PA Wilson 400 Ultra Wilson 400 Ultra Wilson 400 Ultra
Coax Cable Low-Loss Coax Low-Loss Coax available in
FME-Male / Cable N-Male / Cable N-Male / 500-feet and
FME-Female N-Male - BLACK N-Male - WHITE 1000-feet
Y 951101 5-feet 952302 2-feet 952402 feet
«ни од, 951102 10-feet oy © $ и” 952310 10-feet 952410 10-feet
| 951103 15-feet | 952320 20-feet 952420 20-feet
951125 20-feet 952330 30-feet 952430 30-feet
952350 50-feet 952450 50-feet
952375 75-feet 952475 75-feet
952300 100-feet 952400 100-feet
RG58 Low-Loss Attenuators fF === ON RG-6 Low-Loss
Coax Cable 359935 3dB White Coax Cable
N-Male / F-Male / F-Male
FME-Female 859936 ódB | )
859924 10dB 950602 2-feet
951110 2-feet 859927 20dB . == y | 950620 20-feet
-® ng 951120 10-feet Te * 950630 30-feet
Е 951104 20-feet É % & 250650 50-feef
951137 30-feet
RG-174 Coax Cable RG-174 Coax Cable
FME-Female / SMA-Female / Cell tech support for specific
FME-Female SMA-Male use instructions
951116 6-feet 951130 é-feet 1-844-294-1540
” ты.
Lo ho
LOSS PER 10°
800 1900
. ACTUAL SIZE MHz MHz
The RF Signal Detector Е
867501 45dB [NAL
Displays detected signal frequency,
bandwidth and strength 83dB 1.35 dB
INSTALLER BENEFITS
* Determine which cellular signals, including Eo
3G & 4G, are available for any location
* Find the strongest available signal
* Map the local cellular frequency
environment
* Precisely position directional antennas for
optimum performance
* Maximize signal coverage indoors
WilsonElectronics.com AA Toll Free 1-866-294-6996
© Wilson® Electronics
Say Goodbye to Dropped Calls
Power Supplies
BUILDING POWER SUPPLIES
peus a,
859940 o
859912 “Ya
859969 =,
859977 a
VEHICLE POWER SUPPLIES
859913 =
859983 ©
859905 =
859923 E
859939 2
859963 |
859989 Г»
WilsonElectronics.com
NE
AC/DC 12 V Power Supply
Converts 120/240 V AC to 12 V DC
Home/Office Accessory Kit
AC/DC 12 Y Power Supply
Converts 120/240 V AC to 12 V DC Window
Mount Antenna Bracket
AC/DC 6 V Power Supply
Converts 120/240 V AC to é V DC
AC/DC 5Y USB Power Supply
3 USB cable for Power Supply
Some 8
DC/DC é V Power Supply
Converts 12 Y DC to 6 Y DC
DC 12 V
Power Supply
DC 12 V Hardwire Kit
Power Supply
DC/DC 6 V Hardwire Kit
Power Supply
Converts 12 Y DC to 6 Y DC
DC 12 Y Hardwire Kit
Power Supply
[IDEM High-Power Amplifier)
CLA Power Supply with 3 USB Cable for
Sleek Cradle Booster
5V [1.5 A Hardwire Power Supply
for Sleek & DataPro
45
EEE EE
Portable Signal
Booster Vented Soft
Carrying Case
Designed to help protect
your signal booster
Sturdy, shock-absorbing
material
Keeps components
together and organized
Quick and easy access
Mobile to Mobile
Mobile to Home/Office
Bag only - all components
sold separately
ETRE ||
Part Number
859924
Dimensions
10.5 x 9.5 x 2.5 (inch)
26.67 x 24.13 x 6.35 (cm)
Toll Free 1-866-294-6996
SIII1ddNS$S YIMOd
15 МО 3718V1I¥0d
Dy Wilson
Electronics, Inc.
twitter.t com vil: soncellular
Eo TN
www.wilsonelectronics.com
Wilson® Electronics Sales Department: 1-800-204-4104
3301 E. Deseret Drive [email protected]
St. George, Utah 84/90
International Sales (excluding Canada):
General: 1-866-294-6996 exportewilsonelectronics.com
+1-435-6/3-5021 (Outside of U.S.)
Fax: 435-656-2432
infoewilsonelectronics.com
Technical Support: 1-866-294-1660 s""543986"0111 A
techewilsonelectronics.com 08-29-12 175 + PN 772212 — 2012 English Catalog
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement