Stern Elvis pinball game User manual

THIS PINBALL GAME IS
Find-It-In-Front:
Find-It-In-Front:
Dr.
Dr. Pinball
Pinball Section
Section
®
Or d
™
er
th e
K op
50 it S tion TOURNAMENT PINBALL
2-5 PI al SYSTEM READY!
01 PN T o
1 -0 : P
S
0
The inside cover & the front pages
DR. ¶ thru DR. ¿ covers the basics...
The Portals™Service Menu,
Section 3, is your Technical Friend...
Find the answers to your questions here...
If you still need help, give us a call!
www.elvis.com
Elvis® Pinball. Reg. U.S. Pat @ TM Off. ©EPE .
Joe Blackwell
Patty Schraps
DIRECTOR,
Parts Sales &
Technical Support
X
Parts Sales
MANAGER
Dorothy Brown
X
Parts Sales
REPRESENTATIVE
Your Parts Sales & Technical Support Team
Chas Siddiqi
Patrick Powers
J. Alfer
X
Technical Support
ENGINEER
X
Technical Support
ENGINEER
Technical Support
Documentation
ADMINISTRATOR
Please call us at 1-800-542-5377 or
1-708-345-7700 for Technical Support.
Stern® Pinball, Inc.
Visit us at our Web Site www.SternPinball.com.
780-5084-00
All Rights Reserved.
Printed in the U.S.A.
October 2004
SPI Part Number
)RU3URSHU2SHUDWLRQRIWKLV3LQEDOO
*DPHIRXU3LQEDOOVPXVWEHLQVWDOOHG
(DV\$FFHVV'URS7DUJHW5HSODFPHQW
$VVHPEOHG
9LHZ
%DFN 6LGH
This new Drop Target
Design allows for EASY
ACCESS to the DROP
TARGETS while the entire
assembly stays secured to
the underside of the
playfield.
5HI$
To remove the Drop Target
Access Plate,
simply
remove seven (7) screws.
Five (5) from the plate and
two (2) that secure this
plate to the underside of
the playfield (Ref. A).
Exiting Portals or turning game on/off will start the Power-Up Routine. Upon Power-Up, HOLD IN THE RIGHT
FLIPPER BUTTON to view the CPU Game & Display Code Versions (+ Check-Sums), followed by the Location
& Game ID Numbers and Alerts, if any (see Sec. 3, Chp. 2, GO TO DIAGNOSTICS MENU, Technician Alerts).
Look over the TOURNAMENT MENU in Portals !
Read over Section 3, Chapter 7, Pages 53-57.
An Optional Tournament Kit is required for this ToPS Ready Pinball Game.
You can now easily set-up, start and end Tournaments for cash, tokens, tickets or points!
6HWXS 7RXUQDPHQWV
SHUVRQDO PHVVDJHV FDQ EH DGGHG New to our Pinball Games?
Don’t forget to go over Section 3, Chapter 1, Portals Service Menu Introduction. If using Diagnostics...very
useful! Got confused? Comments? Questions? Call Technical Support at 800-542-5377 or 708-345-7700 (Option 1).
%DFNER[3&%)XVHV520V%ULGJHV5HOD\V3)&DELQHW)XVHV&DE6ZLWFKHV
Inside Coin Door
QUICK REFERENCE FUSE CHART
B a c k b o x F u s e s
LOC:
DISPLAY POWER SUPPLY (P.S.) BOARD
A250v S.B. 90v DC High Voltage Display
F1
LOC:
I / O POWER DRIVER BOARD
F6 7A 250v S.B. 50v DC Primary High Power Coils/Flippers
F7 5A 250v S.B. 20v DC Low Power Coils
F8 5A 250v S.B. 12v DC Logic Power
F9 5A 250v S.B. 12v DC Logic Power
F20 4A 250v S.B. 50v DC Magnets
F21 3A 250v S.B. 50v DC Coils
F22 8A 250v S.B. 18v DC Controlled Lamps
F23 4A 250v S.B. 5v DC Logic
F24 5A 250v S.B. 6.3v AC G.I. Lamps (BRN-WHT WHT-BRN)
F25 5A 250v S.B. 6.3v AC G.I. Lamps (YEL WHT-YEL)
F26 5A 250v S.B. 6.3v AC G.I. Lamps (GRN WHT-GRN)
F27 5A 250v S.B. 6.3v AC G.I. Lamps (VIO WHT-VIO)
F28 3A 250v S.B. 24v AC Not Used / Spare
C a b i n e t F u s e s
LOC:
SERVICE ( AC) OUTLET BOX ( Ca binet Bot tom)
n/a 8A 250v S.B. 115v AC Main Fuse Line (Domestic or USA)
n/a 5A 250v S.B. 220v AC Main Fuse Line (International)
P l a y f i e l d ( P / F ) F u s e s
LOC:
UNDER PLAYFIELD (near Flippe rs)
n/a 3A 250v S.B. 50v DC Right Flipper (BLU-YEL RED-YEL)
n/a 3A 250v S.B. 50v DC Left Flipper (GRY-YEL RED-YEL)
n/a 3A 250v S.B. 50v DC Upr. Rt. Flipper (BLU-YEL RED-YEL)
n/a 3A 250v S.B. 50v DC Upr. Lt. Flipper (GRY-YEL RED-YEL)
For locations & more information on fuses, see Sec. 5, Chapter 2.
Memory Protect
Switch (Bottom)
Playfield Power
Interlock Switch
Volume Control & Service Switches
For operational usage, see Sec. 3, Chapter 1,
Portals Service Menu Introduction.
Service Outlet
(on Power Box)
On/Off Switch
(Under Cabinet)
Transformer on
Cabinet Bottom
Int’l.: 5 Amp 250v USA: 8 Amp 250v
Slo-Blo Fuse
Slo-Blo Fuse
Inside Coin Door
520 7<3( RQ %' /2&$7,21 _ 6,=(
CPU Sound
CPU Game
CPU Voice ROM 1
CPU Voice ROM 2
CPU Voice ROM 3
CPU Voice ROM 4
DISPLAY Controller
U7
U210
U17
U21
U36
U37
U5
3$57 180%(5
512K
1 MB
8 MB
8 MB
8 MB
8 MB
4 MB
965-0415-84
965-0416-84
965-0417-84
965-0418-84
965-0419-84
965-0420-84
965-0421-84
SW300
1R)XVHV
3x AA
9'LVSOD\3RZHU6XSSO\%G
F1
CPU U210 U212
GAME
CMOS
EPROM
RAM
SOUND &
VOICE ROMS
6ROHQRLG
([SDQGHU
%RDUG ‡
7RXUQDPHQW
,QWHUIDFH
%RDUG ‡
U7 U37 U36 U21 U17
)RU 6FKHPDWLFV DQGRU
&RPSRQHQW 3DUWV RQ 3& &386RXQG%G,,Z$70(/5
%RDUGV VKRZQ RQ WKLV SDJH
UHYLHZ 6HFWLRQ &KDSWHU 3ULQWHG &LUFXLW %RDUGV
,23RZHU'ULYHU%RDUG6
7KH <HOORZ 3DJHV
‡ UK or Tournament
GAMES ONLY
For more info., see Section 5,
Chp. 4, PCBs (Yellow Pages)
F24 F26
F25F27
G.I.
Relay
Relay
F8 F7
B3
B2
B20 BRIDGES
BRIDGES
U5
B21
Dot Matrix Display
Bd. (Reverse Side)
1R)XVHV
DISPLAY EPROM U5 / ROM 0 U5
)LQG,W,Q)URQW
'U3LQEDOO
*** All BRIDGES rated
35A @ 100v ***
B1
'LVSOD\&RQWUROOHU%G:
7KH 'LVSOD\ &RQWUROOHU KDV WKH 'LVSOD\
(3520 /RFDWLRQ 8 520 7KLV ERDUG LV ORFDWHG EHKLQG WKH
; 'RW 0DWUL[ 'LVSOD\ %RDUG
F9 F22 F23
B2
+50v DC High
Current Coils
+20v DC Low
Current Coils
B20
+/-12v DC
Sound /
Display / Logic
+18v DC
Illumination
B21
+5v DC Logic
Voltage
B3
F6 F21
B1
F28 F20
'5
X
),1',7,1)5217'U3LQEDOO6HFWLRQ([SODLQHG
The key technical data from various parts of the manual were extracted and combined into the "Find- It-In-Front:
Dr. Pinball Section." This section (pages '5 - ) will assist the technician in locating important technical
information needed to troubleshoot the Pinball Machine. Dr. Pinball is also available in a Flow Chart Help Format
in the Game Display. To access, enter the Portals• Service Menu.
: =
,I &RLO )ODVKODPS 7HVWLQJ
WKH 3OD\ILHOG
3RZHU ,QWHUORFN
6ZLWFK PXVW EH
SXOOHG RXW
?????? +RZ,W:RUNV ??????
First, the operator / technician must enter the Service Menu Mode
(for a complete description of the Portals• Service Menu and ICONS
Read! Section 3, Chapter 1). To get into the Service Menu Mode,
power-up the game (if not already) and open the Coin Door. On the
Coin Door is the Portals• Service Switch Set (Red, Green & Black
Buttons).
Step 1: Push down the Black "BEGIN TEST" Button. Looking at the
Video Display you will momentarily see the introductory screen
followed by the MAIN MENU.
Step 2: Move through the Menus
by pushing the Red "LEFT"
or Green "RIGHT" Buttons.
Step 3: Select or activate the Icons by pushing the Black "ENTER"
Button.
,QVLGH &RLQ 'RRU
3RUWDOV• 6HUYLFH
6ZLWFK 6HW
5HG
*UHHQ
%ODFN
While in the Portals• Service Menu, the Start Button can be used
in lieu of the Black Button; the Left & Right Flipper Buttons can
be used in lieu of the Red & Green Buttons. However, in Switch or
Active Switch Tests only the Red & Green Buttons can be used.
In our Portals• Service Menu, selecting the "DR." Icon
will bring the operator/technician into DR. PINBALL (Flow
Chart Menus), the "on-screen" diagnostic aide. This is a
feature that will allow you to utilize the power of the microprocessor assisting in troubleshooting a problem with the
machine in a Flow Chart format (follow the questions & answer by using the Mini-Icons in the display).
After entering Portals• , the MAIN MENU now appears with the
"DIAG" Icon (GO TO DIAGNOSTICS MENU) flashing; press the
Black "ENTER" Button to activate this ICON. The DIAGNOSTICS MENU now appears with the "SW" Icon (GO TO SWITCH
MENU) flashing; use the Red "LEFT" or Green "RIGHT"
Buttons, until
the "DR." Icon
(DR. PINBALL)
is flashing:
Press the Black "ENTER" Button to activate this ICON. The
DR. PINBALL MENU (Flow Chart Menus) now appears with the
COIL "DR." Icon flashing. Three (3) Icons, Coil "DR.", Switch
"DR." and Lamp "DR." are available for selection. Selecting a
particular Icon will give you a choice of which specific Coil (any
and all coil assemblies such as Flippers, VUKs, Magnets, etc.),
Switch or Lamp Circuit needs to be diagnosed. After selection,
Dr. Pinball will now display a question or a procedure to follow
such as "Does the lamp turn on?" or "Check bridge rectifier
BR-20, if short replace." When Dr. Pinball displays a question or
requests a procedure, Dr. Pinball will expect a response such as
"NO" or "YES". You the operator/technician must respond by
using the Red or Green Buttons to "SELECT" a Mini-Icon and
the Black Button to "ACTIVATE or ENTER" your selection.
For Mini-Icons explanations & details, see the end of Section 3,
Chapter 2, GO TO DIAGNOSTICS MENU, Dr. Pinball.
'5;
)LQG,W,Q)URQW
'U3LQEDOO
',$*1267,&$,'6
If this display flashes, the game is indicating that CMOS RAM
memory (CPU Loc. U212) has been corrupted. This is caused
be either failure in memory (e.g. batteries are dead and/or faulty
RAM) or upon installation of updated version of game code.
Opening the Coin Door will initiate a Factory Restore (Reset),
by opening the Memory Protect Switch. Check battery voltage
at VBATT Test Point on the CPU/Sound Bd. (more details in Section 5, Chapter 4, PCBs).
This display is shown momentarily during Game Mode or
Power-Up to alert the operator of a coil malfunction (coil doesn’t
energize or coil fires a multiple number of times). OPERATOR
ALERT! works by monitoring any switch activated coil that has
the potential to trap a ball when disabled (e.g. in the Auto
Launch, Scoop, Eject, etc.). This alert can also appear if a
switch associated with a coil (e.g. #16 Shooter Lane & #2 Auto Launch) is stuck closed (caused by a switch jam or
stuck ball); the CPU/Sound Board will activate the coil approximately ten times and if the switch remains closed,
the game will report this switch in Technician Alerts & will indicate the following display warning:
If this Tech Report Alert flashes (along with an audible sound),
the game has detected faulty switches and/or missing pinballs.
Select the "TECH" Icon for information (review Technician
Alerts, Pages 24-25). For this Alert display to appear,
Standard Adj. 49, must be changed to POWERUP, COIN
DOOR or POWERUP AND COIN DOOR, the default is NEVER
(review Section 3, Chp. 4, GO TO ADJUSTMENTS MENU, Standard Adjustments, Page 44).
?????????&38',36:,7&+6(77,1*6?????????
Location of Dip Switch [SW300] is on the CPU/Sound Board (Right of CN6, Top Middle)
CPU COUNTRY SETTING:
USA
CPU COUNTRY SETTING:
Austria
CPU COUNTRY SETTING:
Australia
Pos.
ON
OFF
Pos.
ON
OFF
CPU COUNTRY SETTING:
Pos.
Belgium
ON
CPU COUNTRY SETTING:
Canada
8
9999999
8 88
9
9999
8
OFF
9 999999
Pos.
ON
88
OFF
CPU COUNTRY SETTING:
Pos.
Croatia
ON
OFF
CPU COUNTRY SETTING:
Pos.
Denmark
ON
OFF
CPU COUNTRY SETTING:
Pos.
Finland
ON
OFF
999999
88 8
9
9 999
8
8
99 9999
8 8
9 99999
)LQG,W,Q)URQW
'U3LQEDOO
Pos.
ON
OFF
CPU COUNTRY SETTING:
France
CPU COUNTRY SETTING:
Germany
99999999
Pos.
ON
Pos.
ON
888
OFF
Pos.
Greece
ON
Italy
88
9
CPU COUNTRY SETTING:
CPU COUNTRY SETTING:
OFF
OFF
Pos.
ON
OFF
CPU COUNTRY SETTING:
Pos.
Japan
ON
OFF
CPU COUNTRY SETTING:
Pos.
Netherlands
ON
99999
99999
8888
9999
8
999 9999
8 8 8
9 9 999
8
OFF
99 99999
CPU COUNTRY SETTING:
Pos.
New Zealand
ON
OFF
8
9999 999
CPU COUNTRY SETTING: Pos.
ON
Norway
OFF
CPU COUNTRY SETTING: Pos.
ON
Portugal
OFF
CPU COUNTRY SETTING: Pos.
So. Africa
ON
OFF
CPU COUNTRY SETTING: Pos.
ON
Spain
OFF
CPU COUNTRY SETTING: Pos.
Sweden
ON
OFF
CPU COUNTRY SETTING: Pos.
Switzerland
ON
OFF
CPU COUNTRY SETTING: Pos.
UK
ON
OFF
8 8
9 9 9999
8
8
999 999
8 8
99 9 999
8
8
9 99 999
88 8
9 9999
99
88
9999
9
888
9999
'5
Z
,Q 6:,7&+ 0(18
DOVR VHOHFW
$&7,9( DQG
'(',&$7('
6:,7&+ 7(676
&ROXPQ
'ULYH
5RZ
5HWXUQ
1:
U400
6:,7&+0$75,;*5,''(',&$7('6:,7&+(6/2&$7,216
1
4TH
COIN SLOT
SHOOTER
LANE
EXIT
180-5204-00
Coin Door
180-5190-28
11 Below P/F
6TH
COIN SLOT
4-BALL
TROUGH
#1 (LEFT)
3
4
Future Use
Coin Door
RIGHT
COIN SLOT
180-5204-00
Coin Door
180-5119-02
13 Below P/F
5
Sw. Part Number:
7:
U401
LEFT
TOP
LANE
LEFT
BUMPER
LEFT
OUTLANE
180-5010-04
26 Above P/F
180-5189-00
34 Below P/F
500-6227-02
42 Below P/F
180-5015-05
50 Below P/F
500-6227-02
58 Below P/F
Sw. Part Number:
180-5160-00
2:
U206 DS-2 Below Playfield
LEFT
ORBIT
HI
CENTER
SAUCER
EJECT
MIDDLE
TOP
LANE
RIGHT
BUMPER
LEFT
RETURN
LANE
500-6227-02
43 Below P/F
180-5015-05
51 Below P/F
500-6227-02
59 Below P/F
RIGHT
TOP
LANE
BOTTOM
BUMPER
LEFT
SLINGSHOT
4:
Q4
5:
Q5
Q6
6:
Sw. Part Number:
Below P/F
25
D
O
TS
( E )LVIS
180-5158-00
18 Below P/F
D
O
TS
E( L )VIS
180-5158-00
19 Below P/F
180-5087-00
27 Above P/F
D
O
TS
EL( V )IS
180-5158-00
20 Below P/F
180-5158-00
21 Below P/F
180-5087-00
28 Above P/F
RIGHT
RAMP
EXIT
NOT
USED
36
Below P/F
49
Below P/F
500-6227-02
44
180-5015-05
Mini P/F
52
NOT
USED
TOP
HOTEL
STANDUP
( K )ING
Below P/F
180-5054-00 (x2)
60 Below P/F
RIGHT
OUTLANE
NOT
USED
K( I )NG
RIGHT
RAMP
MADE
BOTTOM
HOTEL
STANDUP
RIGHT
RETURN
LANE
Above P/F
515-7381-00
38 Below P/F
180-5190-28
46 Above P/F
515-5162-08
54 In Cabinet
500-6227-02
62 Below P/F
Above P/F
45
515-5162-08
Mini P/F
53
57
515-7381-00
37 Below P/F
500-6227-02
61 Below P/F
#2 LEFT
FLIPPER E.O.S
(End-of-Stroke)
GRY-RED
CN6-P3
Sw. Part Number: 180-5149-00 on Flipper
3:
U206 DS-3 on Cabinet Side
#3 RIGHT
FLIPPER
BUTTON
GRY-ORG
CN6-P4
Sw. Part Number: 180-5164-00 Doubled
4:
U206 DS-4 Below Playfield
#4 RIGHT
FLIPPER E.O.S.
(End-of-Stroke)
GRY-YEL
CN6-P6
Sw. Part Number: 180-5149-00 on Flipper
5:
U206 DS-5 on Cabinet Side
#5 UPPER RT.
FLIPPER
BUTTON
GRY-GRN
CN6-P7
4-BALL
TROUGH
VUK OPTO
( T )CB
LEFT
RAMP
MADE
KI( N )G
RIGHT
ORBIT
LOW
START
BUTTON
RIGHT
SLINGSHOT
180-5204-00
Coin Door
See Sw. 14 Note
15 Below P/F
515-5162-08
23 Below P/F
180-5087-00
31 Above P/F
515-7381-00
39 Below P/F
180-5087-00
47 Above P/F
180-5174-00
55 In Cabinet
180-5054-00 (x2)
63 Above P/F
5TH
COIN SLOT
4-BALL
STACKING
OPTO
T( C )B
LEFT
RAMP
EXIT
KIN( G )
RIGHT
ORBIT
HI
TOURNAMENT
START
HOTEL
DOOR
515-5162-08
24 Below P/F
180-5010-01
32 Below P/F
515-7381-00
40 Below P/F
180-5087-00
48 Above P/F
180-5174-00
56 In Cabinet
180-5119-02
64 Above P/F
SHOOTER
LANE
TC( B )
TOP
SAUCER
EJECT
SCARF
STANDUP
HOTEL
POST
PLUMB
BOB
TILT
HOUND
DOG
GRY-BLK
CN6-P10
#8 BEGIN TEST
(BLACK BUTTON)
(In Test: ENTER)
180-5157-00
515-5162-08
180-5186-00
515-5967-02
180-5189-00
See Sw. 56 Note
180-5190-28
Sw. Part Number:
180-5192-00
Future Use
See Sw. 15 Note
Cabinet Side 16 Below P/F
RT
BUTTON
(UK ONLY)
180-5160-00
30
Sw. Part Number: Same as DS-3 above.
6:
U206 DS-6 on Coin Door
#6 VOLUME
(RED BUTTON)
(In Test: LEFT)
GRY-BLU
CN6-P8
Sw. Part Number:
180-5192-02
7:
U206 DS-7 on Coin Door
GRY-VIO
CN6-P9
#7 SERV. CRED.
(GREEN BUTTON)
(In Test: RIGHT)
Sw. Part Number:
180-5192-04
8:
U206 DS-8 on Coin Door
180-5186-00
35
Below P/F
41
GRN-GRY
CN5-P9
LEFT
COIN SLOT
Below P/F
GRN-VIO
CN5-P8
180-5010-01
29
D
O
TS
ELVI( S )
33
INNER
LOOP
D
O
TS
ELV( I )S
Above P/F
Q8
8:
180-5158-00
22 Below P/F
8
WHT-GRY
CN7-P1
4-BALL
TROUGH
#3
17
Q7
7:
180-5119-02
14 Below P/F
7
WHT-VIO
CN7-P2
Sw. Part Number:
8:
U401
SPINNER
ELVIS
HOME
*5281'
GROUND
,&
BLK
8
,13876
CN6-P1, -P11
1:
U206 DS-1 on Cabinet Side
#1 LEFT
GRY-BRN
FLIPPER
CN6-P2
BUTTON
Q3
3:
180-5204-00
Coin Door
6
WHT-BLU
CN7-P3
180-5119-02
12 Below P/F
4-BALL
TROUGH
#2
CENTER
WHT-GRN COIN
SLOT /
CN7-P5
DBA
Sw. Part Number:
6:
U401
SPOT
NOTE
STANDUP
515-5162-08
10 Above P/F
WHT-YEL
CN7-P6
Sw. Part Number:
5:
U401
Below P/F
9
180-5160-00
Coin Door
2
WHT-ORG
CN7-P7
Sw. Part Number:
4:
U400
Cabinet Side
LT
BUTTON
(UK ONLY)
WHT-RED
CN7-P8
Sw. Part Number:
3:
U400
Q2
2:
GRN-BRN GRN-RED GRN-ORG GRN-YEL GRN-BLK GRN-BLU
CN5-P1
CN5-P3
CN5-P4
CN5-P5
CN5-P6
CN5-P7
WHT-BRN
CN7-P9
Sw. Part Number:
2:
U400
Q1
1:
'6
'6
'6
2SWLRQDO
7RXUQDPHQW
.LW 5HTXLUHG
3OD\ILHOG5
= Switches above Playfield.
= Switches below Playfield.
'6
'6
Switch Part Notes: ¥ Yen Coin Switch is 180-5091-00. Part Numbers
which start with 515- or 500- include the bracket, target, and/or housing.
Switches 14 & 15 Part Note: Transmitter & Receiver OPTO
PC Boards are used as Switches: Transmitter: 515-0173-00 (Sw. 14 & 15);
Receiver: 515-0174-00 (Sw. 14 & 15);
Sw. 56 Part Note: The Switch is comprised of a Hanger Bracket
(535-5319-00) and Contact Wire (535-7563-01) located in the Cabinet.
Some Switch Diodes may be located under the playfield, in the Cabinet
or Backbox on Terminal Strips or Diode Boards and not on the assemblies.
DOTS: D iode O n T erminal S trip, see Sec. 5, Chp.2, Playfield Wiring.
= Switches not on Playfield.
3UHOLPLQDU\
'5
[
)LQG,W,Q)URQW
'U3LQEDOO
,Q /$03 0(18
DOVR VHOHFW
7(67 $// /$036
52: &2/801
/$03 7(676
&ROXPQ
Y
5RZ
*URXQG
Q33
1:
/$030$75,;*5,'/2&$7,216
1:
YEL-BRN
J13-P9
Q34
ROCK
AGAIN
Q35
HOUND
DOG
Q36
Q37
5:
Q38
6:
Q39
RED-VIO
J12-P8
Q40
8:
Q41
33
Q42
RED
J12-P11
4:
U14
YEL-BLK
J13-P6
5:
U13
U12
6:
YEL-GRN
J13-P5
7:
YEL-BLU
J13-P4
LEFT
RETURN LANE
RIGHT
RETURN LANE
RIGHT
OUTLANE
HEARTBREAK
HOTEL
JAILHOUSE
ROCK
ALL
SHOOK UP
9
8
7
U11
YEL-VIO
J13-P3
SPOT
NOTE
SCARF
HITS
COMPLETED
LEFT RAMP
ARROW
6
4
3
2
ELVIS
COLLECTED
SHOOK
RIGHT RAMP
ARROW
1
8:
U10
YEL-GRY
J13-P1
( T )CB
TOP 10
COMPLETED
LEFT
RAMP NOTE
UP
RIGHT
RAMP NOTE
#44 Clear Bulb 34 #44 Clear Bulb 35 #44 Clear Bulb 36 #44 Clear Bulb 37 #44 Clear Bulb 38 #44 Clear Bulb 39 #555 Clear Bulb 40 #555 Clear Bulb
( E )LVIS E( L )VIS EL( V )IS ELV( I )S ELVI ( S )
41 #555 Clear Bulb 42 #555 Clear Bulb 43 #555 Clear Bulb 44 #555 Clear Bulb 45
LEFT ORBIT
ARROW
L. ORBIT BLUE
SUEDE SHOES
LEFT
ORBIT NOTE
ALL
RIGHT ORBIT
ARROW
GIFT
FROM ELVIS
RIGHT
ORBIT NOTE
#44 Clear Bulb 46 #44 Clear Bulb 47 #44 Clear Bulb 48 #44 Clear Bulb
( K )ING
K( I )NG
KI( N )G
KIN( G )
49 #555 Clear Bulb 50 #555 Clear Bulb 51 #555 Clear Bulb 52 #555 Clear Bulb 53 #555 Clear Bulb 54 #555 Clear Bulb 55 #555 Clear Bulb 56 #555 Clear Bulb
HOUND
DOG
CENTER LOOP
ARROW
C. LOOP BLUE
SUEDE SHOES
57 #555 Clear Bulb 58 #555 Clear Bulb 59 #555 Clear Bulb 60
LEFT
TOP LANE
MIDDLE
TOP LANE
RIGHT
TOP LANE
CENTER
LOOP NOTE
LOCK
VIDEO
MODE
73
GOLD
RECORD
HEART
KING OF
ROCK N ROLL
JACKPOT
SUPER
JACKPOT
#44 Clear Bulb 61 #44 Clear Bulb 62 #44 Clear Bulb 63 #555 Clear Bulb 64 #555 Clear Bulb
BREAK
LITE
EXTRA BALL
ENCORE
LETTER
T( C )B
HOTEL
65 #44 Yellow Bulb 66 #44 Yellow Bulb 67 #44 Yellow Bulb 68 #44 Yellow Bulb 69 #44 Yellow Bulb 70
RED-WHT
J12-P10
10:
BLUE
SUEDE SHOES
5
RED-GRY
J12-P9
9:
U15
25 #555 Clear Bulb 26 #555 Clear Bulb 27 #555 Clear Bulb 28 #555 Clear Bulb 29 #555 Clear Bulb 30 #555 Clear Bulb 31 #555 Clear Bulb 32 #555 Clear Bulb
RED-BLU
J12-P6
7:
LEFT
OUTLANE
10
RED-YEL
J12-P4
RED-GRN
J12-P5
3:
YEL-ORG
J13-P7
17 #555 Clear Bulb 18 #555 Clear Bulb 19 #555 Clear Bulb 20 #555 Clear Bulb 21 #555 Clear Bulb 22 #555 Clear Bulb 23 #555 Clear Bulb 24 #555 Clear Bulb
RED-ORG
J12-P3
4:
YEL-RED
J13-P8
#555 Clear Bulb 10 #555 Clear Bulb 11 #555 Clear Bulb 12 #555 Clear Bulb 13 #555 Clear Bulb 14 #555 Clear Bulb 15 #555 Clear Bulb 16 #555 Clear Bulb
9
RED-BLK
J12-P2
3:
U16
2:
#555 Clear Bulb 2 #555 Clear Bulb 3 #555 Clear Bulb 4 #555 Clear Bulb 5 #555 Clear Bulb 6 #555 Clear Bulb 7 #555 Clear Bulb 8 #555 Clear Bulb
1
RED-BRN
J12-P1
2:
U17
#44 Blue Bulb
GRACELAND
71
#44 Red Bulb
SPECIAL
TC( B )
72 #44 Orange Blb.
EXTRA
BALL
#44 Clear Bulb 74 #44 Clear Bulb 75 #44 Clear Bulb 76 #44 Clear Bulb 77 #44 Clear Bulb 78 #44 Clear Bulb 79 #555 Clear Bulb 80 #555 Clear Bulb
( E )NCORE E( N )CORE EN( C )ORE ENC( O )RE ENCO( R )E ENCOR( E )
TOURNAMENT
BUTTON
START
BUTTON
UHDUYLHZ
Lamps 60-62 & 73-78 are located
on the rear of the Back Panel.
3OD\ILHOG5
9%DFNSDQHO
= Lamps above Playfield.
= Lamps below Playfield.
2SWLRQDO
7RXUQDPHQW
.LW 5HTXLUHG
Lamp Part Notes: #555 Bulb Clear = 165-5002-00.
#44 Bulb (Hvy. Fil.) Clear = 165-5000-44-HF. #44 Bulb Red = 165-5053-02.
#44 Bulb Blue = 165-5053-05. #44 Bulb Yellow = 165-5053-06.
#44 Bulb Orange = 165-5053-07 (can sub. with Amber -03).
See Section 4, Chapter 1, Parts Identification & Location, Pages 72-74 for
more details on bulbs and corresponding sockets.
Some Lamp Diodes may be located under the playfield, in the Cabinet or
Backbox on Terminal Strips and not on or with the Lamp Socket.
DOTS: D iode O n T erminal S trip, see Sec. 5, Chapter 2, Playfield Wiring.
= Lamps not on Playfield.
3UHOLPLQDU\
)LQG,W,Q)URQW
'U3LQEDOO
'5
\
,Q &2,/ 0(18
DOVR VHOHFW
&<&/,1*
&2,/
7(67
+LJK &XUUHQW &RLOV *URXS &2,/6'(7$,/('&+$577$%/(
Drive
Driver
Transistor Ouput Board
#1
TROUGH UP-KICKER
Q1
#2
AUTO LAUNCH
Q2
#3
ELVIS 5-BANK RESET
Q3
#4
(OPT) SHAKER MOTOR
Q4
#5
MAGNET
Q5
#6
CENTER EJECT
Q6
#7
HOTEL LOCK RELEASE
Q7
#8
CONTROL GATE
Q8
+LJK &XUUHQW &RLOV *URXS #9
LEFT BUMPER
I/O
Power
Driver
6
Drive
Driver
Transistor Ouput Board
Q9
#10 RIGHT BUMPER
Q10
#11 BOTTOM BUMPER
Q11
#12 TOP EJECT
Q12
#13 UPPER LEFT FLIPPER
Q13
#14 UPPER RIGHT FLIPPER
Q14
#15 LEFT FLIPPER (50v RED/YEL)
Q15
#16 RIGHT FLIPPER (50v RED/YEL)
Q16
/RZ &XUUHQW &RLOV *URXS 5
5
I/O
Power
Driver
6
Drive
Driver
Transistor Ouput Board
#17 LEFT SLINGSHOT
Q17
#18 RIGHT SLINGSHOT
Q18
#19 HOTEL DOOR
Q19
#20 FLASH: BACK PANEL X2
Q20
#21 FLASH: BACKPANEL TCB
Q21
#22 FLASH: SPINNER
Q22
#23 FLASH: UPR RT FLIPPER X2
Q23
#24 OPTIONAL COIL
Q24
5
I/O
Power
Driver
6
Power Line
Color
Power Line
Connection
Power
Voltage
Drive Transistor
Control Line Color
D.T. Control
Line Connect
Coil GA-Turn
or Bulb Type
YEL-VIO
J10-P4/5 50v DC
BRN-BLK
J8-P1
YEL-VIO
J10-P4/5 50v DC
BRN-RED
J8-P3
YEL-VIO
BRN-ORG
J8-P4
BRN-YEL
J8-P5
Motor Only
VIO-YEL
J10-P4/5 50v DC
v AC
J17-P7 16
12v DC
J10-P3 50v DC
!
23-8000 !
090-5001-00B
24-9400 !
090-5036-00B
BRN-GRN
J8-P6
22-6500
YEL-VIO
J10-P4/5 50v DC
BRN-BLU
J8-P7
YEL-VIO
J10-P4/5 50v DC
BRN-VIO
J8-P8
YEL-VIO
J10-P4/5 50v DC
BRN-GRY
J8-P9
Power Line
Color
Power Line
Connection
Drive Transistor
Control Line Color
D.T. Control
Line Connect
YEL-VIO
J10-P4/5 50v DC
BLU-BRN
J9-P1
26-1200
26-1200
RED-WHT
Power
Voltage
YEL-VIO
J10-P4/5 50v DC
BLU-RED
J9-P2
YEL-VIO
J10-P4/5 50v DC
BLU-ORG
J9-P4
YEL-VIO
GRY-YEL~3A
Fuse~RED-YEL
BLU-YEL~3A
Fuse~RED-YEL
GRY-YEL~3A
Fuse~RED-YEL
BLU-YEL~3A
Fuse~RED-YEL
J10-P4/5 50v DC
BLU-YEL
J9-P5
J10-P1/2 50v DC
BLU-GRN
J9-P6
J10-P1/2 50v DC
BLU-BLK
J9-P7
J10-P1/2 50v DC
ORG-GRY
J9-P8
J10-P1/2 50v DC
ORG-VIO
J9-P9
26-1200
090-5044-00B
!
24-9400 !
090-5036-00B
23-8000 !
090-5001-00B
32-1800 !
090-5031-00B
041-5029-01
090-5042-00
Coil GA-Turn
or Bulb Type
!
!
090-5044-00T
26-1200 !
090-5044-00T
24-9400 !
090-5036-00B
23-9000 !
090-5020-30
23-9000 !
090-5020-30
22-9000 !
090-5020-20T
22-9000 !
090-5020-20T
090-5044-00T
Power Line
Color
Power Line
Connection
Power
Voltage
Drive Transistor
Control Line Color
D.T. Control
Line Connect
Coil GA-Turn
or Bulb Type
BROWN
J7-P1
20v DC
VIO-BRN
J7-P2
BROWN
J7-P1
20v DC
VIO-RED
J7-P3
BROWN
J7-P1
20v DC
VIO-ORG
J7-P4
ORANGE
J6-P10
20v DC
VIO-YEL
J7-P6
165-5000-89-HF
ORANGE
J6-P10
20v DC
VIO-GRN
J7-P7
165-5000-89-HF
ORANGE
J6-P10
20v DC
VIO-BLU
J7-P8
#906 Bulb
ORANGE
J6-P10
20v DC
VIO-BLK
J7-P9
#906 Bulb
RED
J16-P7
5v DC
VIO-GRY
J7-P10
Opt. 5v
Power Line
Color
Power Line
Connection
Power
Voltage
Drive Transistor
Control Line Color
D.T. Control
Line Connect
GRY-RED
J16-P3
12v DC
RED
J6-P1
GRY-RED
J16-P3
12v DC
GREEN
J6-P2
GRY-RED
J16-P3
12v DC
BLACK
GRY-RED
RED-WHT TO
BROWN
RED-WHT TO
BROWN
ORANGE
J16-P3
12v DC
!
23-8000 !
090-5001-00T
27-1500 !
090-5004-00B
23-8000
090-5001-00T
#89 Bulb
#89 Bulb
165-5004-00
165-5004-00
D iode O n T erminal S trip (if noted)
/RZ &XUUHQW &RLOV *URXS Drive
Driver
Transistor Ouput Board
#25 STEPPER #1
Q25
#26 STEPPER #2
Q26
#27 STEPPER #3
Q27
#28 STEPPER #4
Q28
#29 ELVIS LEGS
Q29
#30 ELVIS ARMS
Q30
#31 FLASH: ELVIS SPOT LIGHT
Q31
5
I/O
Power
Driver
6
J7-P1
J7-P1
J6-P10
BLUE
RED-WHT
TO
20v DC
BLK-GRN
TO
20v DC RED-WHT
BLK-BLU
BLK-VIO
20v DC
J6-P3
J6-P4
Coil GA-Turn
or Bulb Type
Stepper
Motor
Only
041-5069-00
J6-P6
!
29-1400 !
090-5072-03
J6-P7
#906 Bulb
J6-P5
29-1400
090-5072-03
165-5004-00
#906 Bulb
ORANGE
J6-P10 20v DC
BLK-GRY
J6-P8
Q32
#32 FLASH: SLINGS X2
165-5004-00
1RWH ,Q 7HVW )ODVK /DPSV 0HQX )ODVK ,FRQ )ODVKHUV WHVWHG DUH DOO )ODVK /DPSV ORFDWHG EHWZHHQ 44 7KLV *DPH 44 44
$X[LOLDU\ 8. 21/<
AUX 1: LEFT UP/DOWN POST
!
Drive
Driver
Transistor Ouput Board
Power Line
Color
Power Line
Connection
Power
Voltage
Drive Transistor
Control Line Color
D.T. Control
Line Connect
Coil GA-Turn
26-1200
!
!
!
BROWN
J7-P1
WHITE
J2-P3
20v DC
UK 3X
090-5044-00T
Trans.
23-1100
BROWN
J7-P1
RED
J2-P4
20v DC
AUX 2: CENTER UP/DOWN POST Q2
090-5030-00T
Driver
26-1200
BROWN
J7-P1
ORANGE
J2-P7
Q3
20v DC
AUX 3: RIGHT UP/DOWN POST
Board
090-5044-00T
Coil Note: Either -00B or -00T can be used for coil replacements. B/T listed is preferable for easier diode access & may differ on game.
3UHOLPLQDU\
'5
]
!
Q1
)LQG,W,Q)URQW
'U3LQEDOO
&2,/)/$6+/$03/2&$7,216
<HOORZ
9%DFNSDQHO
&OHDU
<HOORZ
IURQWYLHZ
7\SLFDO6ZLWFK:LULQJ6FKHPDWLF
5HG
'HGLFDWHG6ZLWFK6FKHPDWLF
7\SLFDO/DPS:LULQJ6FKHPDWLF
5('
&20021
<(/
-XXX
-XXX
Diode
1N4001
7\SLFDO&RLO:LULQJ
$8; $QRGH 1RQ
%DQGHG 6LGH
$8; 'ULYH
7UDQVLVWRU
5HG
3RZHU 6XSSO\
9ROWDJH
= Coils / Flash Lamps above Playfield.
$8; &DWKRGH
%DQGHG 6LGH
5HG
1N4004
= Coils / Flash Lamps below Playfield.
= Coils / Flash Lamps not on Playfield.
&RORU = Color of Mini-Mars of Flash Lamp Bulb.
Some Coil or Flash Lamp Diodes may be located under the playfield, in the Cabinet
or Backbox on Terminal Strips or Diode Boards and not on the assemblies.
DOTS: D iode O n T erminal S trip See Section 5, Chapter 2, Playfield Wiring.
3OD\ILHOG5
)LQG,W,Q)URQW
'U3LQEDOO
Coil Q24 is Optional. If either a Coin Meter, Token Dispenser or Knocker (all optional
equipment) is required, call Technical Support for more information, 1-800-542-5377
or 1-708-345-7700.
3UHOLPLQDU\
'5
^
'RPHVWLF3LQEDOO5HGHPSWLRQ'LVWULEXWRUV0DS
?????????,QWHUQDWLRQDO'LVWULEXWRUV0DS?????????
For Parts & Service, call your nearest Distributor. View the above maps & the directories on the next page to locate your closest Distributor in your state, province, or
country. Distributors and phone numbers are subject to change. Call Stern® Pinball, Inc. (Parts Sales & Technical Support) with any questions or if your Distributor
cannot help you: 1-800-542-5377 (in USA or Canada) or 1-708-786-5466. Visit us at www.SternPinball.com for current Distributor Information & other pinball needs.
'5
_
)LQG,W,Q)URQW
'U3LQEDOO
'RPHVWLF3LQEDOO5HGHPSWLRQ'LVWULEXWRUV'LUHFWRU\
$/$%$0$
%LUPLQJKDP 9HQGLQJ
,2:$
*UHDWHU $PHULFD 'LVW
0,66285,
*UHDWHU $PHULFD 'LVW
1257+ '$.27$
0+ $VVRFLDWHV ,QF
)UDQFR 'LVWULEXWLQJ
0RVV 'LVWULEXWLQJ
0RVV 'LVWULEXWLQJ
Kansas City (1)
1-816-231-6600
2+,2
$WODV 'LVW ,QWHUQDWLRQDO
St. Louis (2)
1-314-645-3393
&OHYHODQG &RLQ
Birmingham (1)
1-205-324-7526
Montgomery (2)
1-334-834-3455
$5,=21$
%HWVRQ :HVW
Phoenix
1-480-380-8857
0RXQWDLQ &RLQ
Phoenix
1-602-269-7596
&$/,)251,$
%HWVRQ :HVW
Buena Park (1)
1-714-228-7500
So. San Francisco (2)
1-650-952-4220
&$ 5RELQVRQ
Los Angeles (3)
1-323-735-3001
San Francisco (4)
1-650-871-4280
&2/25$'2
0RXQWDLQ &RLQ
Denver
1-303-427-2133
&211(&7,&87
7'0 'LVWULEXWLQJ
Williamantic
1-860-423-1403
)/25,'$
%LUPLQJKDP 9HQGLQJ
Orlando (1)
1-407-425-1505
%UDG\ 'LVWULEXWLQJ
Miami [Miramar] (2)
1-954-874-1100
Orlando (1)
1-407-872-1666
*(25*,$
*UHDWHU 6RXWKHUQ 'LVW
Smyrna
1-770-803-3040
,//,12,6
$PHULFDQ 9HQGLQJ
Elk Grove Village
1-847-439-9400
$WODV 'LVW ,QWHUQDWLRQDO
Elk Grove Village
1-847-952-7500
:RUOG :LGH 'LVWULEXWLQJ
Elk Grove Village
847-434-0400
Johnston
1-515-278-4455
Des Moines
1-515-266-6422
,1',$1$
$WODV 'LVW ,QWHUQDWLRQDO
Indianapolis
1-317-786-6892
6KDIIHU 'LVWULEXWLQJ
Indianapolis
1-317-899-2530
.$16$6
8QLWHG 'LVW ,QF
Wichita
1-316-263-6181
/28,6,$1$
$0$ 'LVWULEXWRUV ,QF
Kansas City (1)
1-816-531-4300
6KDIIHU 'LVWULEXWLQJ
1(%5$6.$
&HQWUDO 'LVW
Omaha
1-402-493-5600
*UHDWHU $PHULFD 'LVW
Omaha
1-402-553-2812
1(9$'$
0RXQWDLQ &RLQ
Las Vegas (1)
1-702-798-0900
Metairie (1)
1-504-835-3232
Parts & Service Only:
5HQR *DPH 6DOHV
New Orleans (2)
1-504-888-3500
1(: -(56(<
%HWVRQ (QWHUSULVHV
1HZ 2UOHDQV 1RYHOW\
0$5</$1'
%HWVRQ (QWHUSULVHV
Baltimore
1-410-646-4100
Parts & Service Only:
:HLQHU 'LVWULEXWLQJ
Baltimore
1-410-525-2600
0$66$&+86(776
%HWVRQ (QW 1(&2
Norwood (1)
1-781-769-9760
*HND\ 6DOHV
Reno (2)
1-775-829-2080
Carlstadt (1)
1-201-438-1300
-DFN *XDUQLHUL
6HUYLFH &R ,QF
3LQEDOOVDOHVFRP
Lakewood (2)
1-732-364-9900
1(: 0(;,&2
0RXQWDLQ &RLQ
Albuquerque
1-505-345-7706
1(: <25.
%HWVRQ (QWHUSULVHV
Fargo
1-701-282-7877
Cincinnati (1)
1-513-851-4100
Cleveland (2)
1-216-692-0960
6KDIIHU 'LVWULEXWLQJ
Columbus (3)
1-614-421-6800
Macedonia (4)
1-330-467-4850
2./$+20$
*DOD[\ 'LVWULEXWLQJ
Tulsa
1-918-835-1166
25(*21
%HWVRQ :HVW
Portland
1-503-786-9200
Toll-Free
1-800-987-4946
3(116</9$1,$
%HWVRQ (QWHUSULVHV
King Of Prussia (1)
1-610-265-1155
Pittsburgh (2)
1-412-331-8703
&OHYHODQG &RLQ 0DFKLQH
&OHYHODQG &RLQ 0DFKLQH
Richmond Hill (1)
1-718-291-5757
Parts & Service Only:
Livonia (2)
1-734-432-1040
0,11(627$
/LHEHUPDQ 0XVLF
Minneapolis (1)
1-952-887-5299
0RVV 'LVWULEXWLQJ
Richfield (2)
1-612-798-8030
1257+ &$52/,1$
%UDG\ 'LVWULEXWLQJ
Charlotte (1)
1-704-357-6284
%5,7,6+ &2/80%,$
Pittsburgh (2)
1-412-920-1300
Wilkes-Barre (3)
1-570-824-9994
6287+ &$52/,1$
*UHHQ &RLQ
Mrytle Beach
1-843-626-1900
Toronto
1-416-251-2122
7(;$6
$PXVHPHQW 'LVWULEXWRUV
Parts & Service Only:
%HWVRQ 7H[DV
3DFLILF 9HQGLQJ
San Antonio (3)
1-210-225-3844
Dallas (1)
1-214-638-4900
&RPPHUFLDO 0XVLF
&DQ &RLQ 0DFKLQH
Burnaby (1)
1-604-420-4008
Parts & Service Only:
Vancouver (2)
1-604-324-2164
Dallas (1)
1-214-741-6381
'LVFRXQW $UFDGH *DPHV
Crowley (1)
1-817-297-0440
+$ )UDQ] &R
Corsicana (4)
1-903-874-4740
5RWK 1RYHOW\ 6XSHULRU
%D\ &RLQ
Memphis
1-901-353-1000
*UHHQ *$0(6
6SHFLDOW\ &RLQ 3URGXFWV
0,&+,*$1
$WODV 'LVW ,QWHUQDWLRQDO
Wyoming (1)
1-616-241-1472
217$5,2
6WDUEXUVW &RLQ 0DFK
0RXQWDLQ &RLQ
Portland
1-503-234-5491
&$1$'$
Memphis
1-901-345-7811
Parts & Service Only:
Houston (2)
1-713-523-7366
San Antonio (3)
1-210-226-6322
Portland
1-503-772-4567
New Hyde Park (2)
1-516-354-4647
Syracuse (3)
1-315-437-2400
Parts & Service Only:
E. Longmeadow (2)
1-413-525-2700
7(11(66((
%UDG\ 'LVWULEXWLQJ
0DVWHU 6DOHV
87$+
0RXQWDLQ &RLQ
Salt Lake City
1-801-262-5494
6WUXYH 'LVWULEXWLQJ
Salt Lake City
1-801-328-1636
:$6+,1*721
0RXQWDLQ &RLQ
Seattle
1-206-682-5700
:,6&216,1
3LRQHHU 6DOHV 6YF
Green Bay (1)
1-920-336-5800
Menomonee Falls (2)
1-262-781-1420
/LHEHUPDQ9LNLQJ 9HQG
Menomonee Falls (2)
1-262-703-4168
2SHUDWRUV 'LVWULEXWLQJ
Archdale (2)
1-336-884-5714
Note: For states and
Canadian Provinces
which do not have
Distributors, call the
neighboring state or
province with the city
closest to you (indicated
with a white dot). States
or Provinces with more
than 1 city containing a
distributor are numbered.
View the map on the
previous page.
Note: Distributors are subject to change. Visit us at www.SternPinball.com for current Distributor Information.
????????,QWHUQDWLRQDO'LVWULEXWRUV'LUHFWRU\????????
$5*(17,1$
6RXWK &RPSDQ\
Mar Del Plata
[54] 2234-95-5532
$8675$/,$
$PXVHPHQW 0DFK 'LVW
Matraville
[61] 2931-6-6000
$8675,$
Parts & Service Only:
5 5XSS
Leibnitz
[43] 3452-8-6105
Parts & Service Only:
7$%
Ansfelden
[43] 7229-7-8040
'(10$5.
-. $XWRPDWHU $6
Thisted
[45] 9792-0925
(1*/$1'
VHH 81,7(' .,1*'20
),1/$1'
3HOLND QHW 2\
Vantaa
[35] 8 ( 0 ) 9-290-450
)5$1&(
$YUDQFKHV $XWRPDWLF
Ducey
[33] 2338-9-6162
6)$
Paris
[33] 1532-6-8080
%(/*,80
1$086&2
Brussels
[32] 2414-4596
)LQG,W,Q)URQW
'U3LQEDOO
*(50$1<
$'3 *DXVHOPDQQ
Espelkamp
[49] 5741-27-3384
%HUJPDQQ ,QW·O *DPLQJ
1(: =($/$1'
&RLQ &DVFDGH /WG
Christchuch
[64] 3338-1411
Parts & Service Only:
$PFR 0DFKLQH 6XSSOLHV
Rellingen
[49] 4101-3-0240
Witten
[49] 2302-28-2540
Auckland
[64] 9846-7606
Espelkamp
[49] 5772-4-9422
Oslo
[47] 2291-8383
0(;,0
+2//$1'
VHH 7+( 1(7+(5/$1'6
,7$/< 560
7HFQRSOD\ 6$
San Marino
[39] 5499-0-1508
7+( 1(7+(5/$1'6
-9+ *DPLQJ 3URGXFWV
Tilburg
[31] 1359-5-3200
125:$<
9HQGFRPDWLF
32578*$/
-DFLQWR 0DUWLQV 6$
6287+ $)5,&$
. : $PXVHPHQWV
Port Elizabeth
[27] 4148-4-3344 or
[27] 4148-4-2940
63$,1
&RPHUFLDO &RFDPDWLF
Coslada (Madrid)
[34] 9167-1-6980
Parts & Service Only:
London, England
[44] 2089-65-2055
Parts & Service Only:
(OHFWURFRLQ $IWHUVDOHV
Cardiff, S. Glamorgan
[44] 2920-45-0345
6HQWH 6$
Madrid
[34] 9154-1-7112
6:('(1
%MXYLD )ULWLG $%
Belas
[35] 1214-32-5624 or
[35] 1214-32-5638
Bjuv
[46] 4238-6900
Moscow
[095] 219-2949 or
[095] 219-8917
Harkingen
[41] 6238-8-8961
5866,$
2'$ *DPH 0DFKLQHV
81,7(' .,1*'20
(OHFWURFRLQ
6:,7=(5/$1'
1RYRPDW $*
Note: From inside the
US, use prefix 011-.
'5
`
32:(55(48,5(0(176
This game must be connected to a properly grounded outlet to reduce shock hazard & insure proper game operation. See Sec. 5, Schematics & Troubleshooting, Chp. 3, Cabinet Wiring (Transformer
Power Wiring), for transformer connections required for Normal, High, and Low Line conditions.
110v AC - 125v AC @ 60Hz
Normal Line:
Domestic
AVG OPERATION
MAX OPERATION
use an 8AMP 250v Slo-Blo Fuse.
CURRENT: 8AMP
CURRENT: 2.8AMP
WATTAGE: 329w
WATTAGE: 940w
218v AC - 240v AC @ 50Hz
High Line:
Export
AVG OPERATION
MAX OPERATION
England
use 2x 5AMP 250v Slo-Blo Fuses.
CURRENT: 5AMP
CURRENT: 1.8AMP
& Hong
| 8AMP*
Kong use
(*England & Hong Kong use an 8
250v S/B Fuse.)
|
WATTAGE: 412w
WATTAGE: 1145w 1832w* an
95v AC - 108v AC @ 50Hz / 60Hz
Low Line:
Export Japan Only
AVG OPERATION
MAX OPERATION
use an 8AMP 250v Slo-Blo Fuse.
CURRENT: 2.6AMP
CURRENT: 8AMP
WATTAGE: 812w
WATTAGE: 264w
AMP
8A Fuse.
75$163257$7,21???????*$0(',0(16,216???????
ToPS
Read & follow Section 1,
Chapter 1, Pinball Game
Set-Up Procedures, and
How to Secure the Backbox
for Transporting. Remove
the legs and secure the game
within the transporting vehicle.
SAVE AND RETAIN ALL
PRINTED INFORMATION
INSIDE THE CABINET !
Back Height *
75"
To reduce the possibility
of damage, observe ALL
precautions whenever
transporting the game.
+4"
Back Width
27"
28"
The overall Front / Back Height
dimensions include the added "
with the Leg Levelers turned all
the way in.
* P L E A S E N O T E:
If the optional ToPS Kit is
installed, the ToPS Display
will add another 4 " to the
overall Back Height for a total
of 79 ".
Ceiling Height Requirement:
2 An additional 1 " is required
for the rotation ( ) of the Backbox
to the upright position.
The complete Back Height
required with ToPS
Display and rotation:
81"
23"
47"
51"
22"
Approx. Unboxed Weight:
270lbs. (+/- 10)
Boxed Weight:
16"
Wt. 290lbs. (+/- 5)
The Cabinet is designed to give
the recommended 6.5° pitch to
the Playfield when all four (4)
Legs are installed with the Leg
Levelers turned all the way in.
With the Leg Levelers turned all
the way out (not recommended),
an additional 1 " should be
added to the respective Back or
Front Height dimensions.
'5
a
Front Height
Height 56" Width 31"
Depth 31"
55"
35"
"
Leg Length is: 30 "
)LQG,W,Q)URQW
'U3LQEDOO
7KH(OYLVŠ3LQEDOO*DPH6HUYLFH0DQXDO*HQHUDO7DEOHRI&RQWHQWV
See Sections 3 & 5, Table Of Contents, for details of that Section and it’s Chapters.
For Proper Operation..., four (4) Pinballs must be installed! ............................. Inside Front
X Backbox PCB Fuses, ROMs, Bridges, Relays Playfield/Cabinet Fuses, Cab. Switches.................DR. X
X Find-It-In-Front: Dr. Pinball Section Explained X How It Works ......................................................DR. Y
X Diagnostic Aids X CPU DIP Switch Setting ......................................................................................DR. Z
X Switch Matrix Grid, Dedicated Switches & Locations .......................................................................DR. [
X Lamp Matrix Grid & Locations.............................................................................................................DR. \
X Coils Detailed Chart Table....................................................................................................................DR. ]
X Coil & Flash Lamp Locations ..............................................................................................................DR. ^
X Domestic Pinball & Redemption and International Distributors Maps ............................................DR. _
X Domestic Pinball & Redemption and International Distributors Directories ..................................DR. `
X Power Requirements X Transportation X Game Dimensions........................................................DR. a
Game Manual General Table of Contents ............................................................................i - ii
SECTION 1.............................................................................................................................1 - 4
Chapter 1, After Set-Up .................................................................................................................................... 1
Z Pinball Game Set-Up Procedures ................................................................................................................ 1
Z Pinball Game Set-Up Future Reference..................................................................................................2 - 3
Z How to Secure the Backbox... Leg Leveler Adjustment Easy Access... - 2 Positions ........................ 4
Z
Z
SECTION 2.............................................................................................................................5 - 6
Chapter 1, Game Operation & Features .......................................................................................................... 5
Z Start of Game Features (Starting a Normal Game, ... Team Play, ... Tournament Play with ToPS• )
Z During Game Features (Feature Mode & Combination Shots, Multiball, Replay Feature)
Z End of Game Features (Game Endings, Match Features, Entering Initials/Name) ...................................... 5
Z Auto Percentaging Instruction Card ........................................................................................................ 6
Z
SECTION 3...........................................................................................................................7 - 57
Z Table of Contents (Section 3: Chapters 1-7 Only) ........................................................................................ 7
Z Portals• Service Switch Set Access & Use (Function 1, ...; Function 2, ...; Function 3, ...) ........................ 8
Chapter 1, Portals• Service Menu Introduction ............................................................................................ 9
Z How to Use This Section .............................................................................................................................. 9
Z Portals• Service Menu Icon Tree..........................................................................................................10 - 11
Z Portals• Service Menu Example X Exiting the Portals• Service Menu ...............................................12 - 14
Chapter 2, Go To Diagnostics Menu .......................................................................................................15 - 31
Chapter 3, Go To Audits Menu ................................................................................................................32 - 37
Chapter 4, Go To Adjustments Menu......................................................................................................38 - 46
Chapter 5, Go To Installs Menu ...............................................................................................................47 - 50
Chapter 6, Go To Reset Menu..................................................................................................................51 - 52
Chapter 7, Go To Tournament Menu .......................................................................................................53 - 57
SECTION 4.........................................................................................................................58 - 74
Chapter 1, Parts Identification & Location (The Pink Pages)...................................................................... 59
Z Table of Contents (Section 4, Chapter 1 Only) and Overview .................................................................... 59
Elvis® Pinball Backbox Assembly ............................................................................................................ 60
Speaker Panel Assy. for the Backbox & Associated Parts:......................................................................... 61
Cabinet - General Parts & Switches....................................................................................................62 - 63
Playfield - General Parts, Miscellaneous Switches & Switches on Assemblies ( Above ) ..................64 - 65
Playfield - General Parts, Miscellaneous Switches & Switches on Assemblies ( Below ) ......................... 66
Playfield - Plastics (Screened & Clear) Kit, Upper Playfield and Decals & Mylar Kits ................................ 67
Playfield - Rubber Parts Black & White ( Rings Actual Size).................................................................... 68
Section 4, Chapter 1, Parts Identification & Location (The Pink Pages) Continued on the Next Page
2FWREHU
L
Section 4, Chapter 1, Parts Identification & Location (The Pink Pages) Continued from the Previous Page
Playfield - Metal Posts (Screws) and Nuts ( Actual Size ) .........................................................................69
Playfield - Hex Spacers ( Actual Size )......................................................................................................70
Playfield - Plastic Posts & Spacers ( Actual Size ) ....................................................................................71
Playfield & Back Panel - Small Bayonet Type Bulbs & Sockets ( Actual Size ) .........................................72
Playfield & Back Panel - Large Bayonet Type Bulb and Sockets ( Actual Size ) .......................................73
Playfield - Wedge Base Bulbs and Sockets ( Actual Size ) .......................................................................74
Chapter 2, Drawings for Major Assemblies & Ramps (The Blue Pages) ..............................................75-98
Z Table of Contents (Section 4, Chapter 2 Only) and Overview ....................................................................75
Ball Shooter (Plunger) Assembly, 500-6146-00-07 ...........................................................................(Top) 76
Autoplunger Arm Weld Assembly, 500-6091-00 with ...Coil Assembly, 500-6092-03B .............. (Bottom) 76
4-Ball Trough Assembly, 500-6318-24 and Associated Parts: ....................................................................77
Flipper (Left) Assembly, 500-6543-11 and Associated Parts:.....................................................................78
Flipper (Right) Assembly, 500-6543-01 and Associated Parts: ..................................................................79
Flipper (Upper Left) Assembly, 500-6543-33-84 and Associated Parts:.....................................................80
Flipper (Upper Right) Assembly, 500-6543-23-84 and Associated Parts: ..................................................81
Slingshot (Left & Right) Assemblies, 500-5849-00 (Qty. 2) ........................................................................82
Bumper Top (Left, Right & Bottom) Assemblies, 515-6459-01 (Qty. 3)..............................................(Top) 83
Bumper Bottom (Left, Right & Bottom) Assy., 515-6459-04 (Qty. 3)............................................. (Middle) 83
Bumper Switch Assy., 515-6459-09R (Qty. 3) and Associated Parts: ......................................... (Bottom) 83
5-Bank Drop Target Assembly, 500-6795-00 .......................................................................................84 - 85
Ball Eject Bottom Assy., 515-7447-00; Ball Eject Top (Left ...) Assy., 515-7448-00 and Assoc. Parts:.......86
Ball Eject Bottom Assy., 515-7447-00 Ball Eject Top (Right ...) Assy., 515-7448-01 and Assoc. Parts: .....87
Hound Dog Pop-Up Target Individual Parts Only........................................................................................88
Magnet Coil, Bracket (with Threaded Bushing) and Miscellaneous Parts .........................................(Top) 89
Ball Lock Assembly, 500-5867-07 ............................................................................................... (Bottom) 89
Elvis, Stepper Motor & 3-Bank Stand-Up Target Individual Parts Only.............................................90 - 91
Hotel Plastics & Decal Reference ... Assembly Reference Only.................................................... (Left) 92
Hotel Door Coil Assembly, 500-6752-01.........................................................................(Right) 92 - (Top) 93
Hotel Frame, Stand-Up Targets & Switch Individual Parts Only ............................................... (Bottom) 93
Upper Playfield Individual Parts Only ......................................................................................................94
Right Steel Ramp & Right Wire Ramp Individual Parts Only ...................................................................95
Left Wire Ramp & Lt. Steel Ramp Individual Parts Only ..........................................................96 - (Top) 97
Back Panel Individual Parts Only.............................................................................................. (Bottom) 97
Z UK ONLY OPTIONAL: Ball Deflector Asssemblies, 500-5788-02 (Qty. 2)...................................(Left) 98
Z UK ONLY OPTIONAL: Up/Down Post Assembly, 500-6293-00 ................................................. (Right) 98
SECTION 5 ........................................................................................................................99-148
Chapter 1, Backbox Wiring (The Yellow Pages) ...................................................................................99 - 102
Z Table of Contents (Section 5: Chapters 1-4 Only) ......................................................................................99
Z Coils Detailed Chart Table ........................................................................................................................100
Chapter 2, Playfield Wiring (The Yellow Pages) .................................................................................103 - 106
Chapter 3, Cabinet Wiring (The Yellow Pages)...................................................................................107 - 108
Chapter 4, Printed Circuit Boards (PCBs) (The Yellow Pages).........................................................109 - 148
APPENDIXES A-J .............................................................................................................. A1-J1
Z Table of Contents (Appendixes Only) ...............................................................................................after 148
Z Appendixes A-J .................................................................................................................................. A1-J1
:
LL
Plastic Part Color Chart.............................................................................................. (Bottom) H1 + (Top) I1
Glossary of Terms...........................................................................................................................Last Page
Limited Warranty, Cautions, Warnings & Notices ...........................................................................Last Page
Switch Matrix Grid & Dedicated Switches
Lamp Matrix Grid ............................................ Inside Back
:
2FWREHU
6HFWLRQ & KD SW H U R I [[ [[ [[ [[ [[6HUYLFH0HQX6\VWHP
7DEOHRI&RQWHQWV
&KDSWHU3RUWDOV• 6HUYLFH0HQX,QWURGXFWLRQ Service Switch Set (Red, Green & Black Buttons) Access & Use ......................................................... 8
]
Function 1, Volume Menu / Function 2, Service Credits Menu / Function 3, Portals• Service Menu .................................... 8
]
Example .......................................................................................................................................................................... 12-13
How to Use This Section ............................................................................................................................ 9
Portals Service Menu Icon Tree for Elvis® Pinball..........................................................................10-11
QUIT THIS SESSION (Exiting the Portals Service Menu) & Problem / Solution Table ...................... 14
&KDSWHU*R7R'LDJQRVWLFV0HQX2YHUYLHZ GO TO DIAGNOSTICS MENU ............................................................................................................... 15
Go To Switch Menu Switch Test Active Switch Test Dedicated Switch Test ........................................16
Test Flash Lamps Clear Ball Trough............................................................................................................................24
Technician Alerts (Switch Detection and Pinball Detection) .................................................................................... 24-25
Service Phone # Begin Play Test .................................................................................................................................25
Fire Knocker Sound / Speaker Test (Speaker Phase Testing) Begin Burn In......................................................26
Dot Matrix Test (Dot Matrix Display Explained) ......................................................................................................... 26-27
Elvis® Test: Stepper Motor (see Go To Switch or Coil Menu for general testing) ........................................................ 27-28
Go To Fuse Table (with Example)......................................................................................................................................29
BACKBOX LAYOUT LOCATIONS: Fuses, Bridges, Relays & ROMs..................................................... 30
Dr. Pinball Coil Flow Chart Switch Flow Chart Lamp Flow Chart ..........................................................31
&KDSWHU*R7R$XGLWV0HQX2YHUYLHZ ]
EARNINGS & STANDARD AUDIT TABLES.......................................................................................................................... 32
GO TO AUDITS MENU........................................................................................................................... 33
Earnings Audits (01-14)......................................................................................................................................................33
Standard Audits (01-68)................................................................................................................................................ 34-35
Feature Audits (01-116) ......................................................................................................................................................36
Go To Printer Menu Quick Printout Full Printout Reset Printer .............................................................37
&KDSWHU*R7R$GMXVWPHQWV0HQX2YHUYLHZ ]
STANDARD & FEATURE ADJUSTMENT TABLES............................................................................................................... 38
GO TO ADJUSTMENTS MENU............................................................................................................. 39
Standard Adjustments (01-55) ..................................................................................................................................... 39-43
Feature Adjustments (01-16)........................................................................................................................................ 44-46
Custom Message (Direct Access to Standard Adjustment 31).......................................................................................46
&KDSWHU*R7R,QVWDOOV0HQX2YHUYLHZ GO TO INSTALLS MENU....................................................................................................................... 47
Install Extra Easy, Easy, Normal, Hard or Extra Hard......................................................................................................47
Install Directors Cut Install 3-Ball or 5-Ball $.50 Competition Free Play Competition
Install Home Play Film Star Reset Install Novelty Install Add-A-Ball Install Factory ...............................48
]
]
Overview of Standard Adjustment Changes upon selectoin of an Install: ............................................................................ 49
Overview of Feature Adjustment Changes upon selection of an Install: ......................................................................... 49-50
&KDSWHU*R7R5HVHW0HQX2YHUYLHZ GO TO RESET MENU............................................................................................................................ 51
Reset Coin Audits Reset Game Audits Reset High Scores Reset Credits Factory Reset .......................51
]
Example ............................................................................................................................................................................... 52
&KDSWHU*R7R7RXUQPDPHQW0HQX GO TO TOURNAMENT MENU (OPTIONAL USE ONLY)...................................................................... 53
]
TOURNAMENT ADJUSTMENT TABLES & TOURNAMENT AUDIT TABLE ........................................................................ 54
Tournament Adjustments (01-13) ......................................................................................................................................55
Start Tournament Stop Tournament Tournament Prizes Tournament Audits (01-14)....................................56
Tournament Audits Continued Sign Messages A-B (Tournie Adj. 14-15) .................................................................57
3RUWDOV• 6HUYLFH
0HQX6\VWHP
6HFWLRQ&KDSWHU
3DJH
6HF0HQX,QWUR
] Switch Matrix Grid & Dedicated Switches
] Switch Matrix Grid Locations, Typical Switch Wiring & Schematic, Dedicated Switch Schematic ........................................ 17
Go To Coil Menu Single Coil Test Cycling Coil Test........................................................................................18
] Partial Coils Detailed Chart ...
] Coil & Flash Lamp Locations, Typical Coil WIring, Bulb Types used for Flash Lamps .......................................................... 19
] Coils Detailed Chart Table .................................................................................................................................................... 20
] Backbox I/O Power Driver Board Detailed Wiring Diagram .................................................................................................. 21
Go To Lamp Menu Single Lamp Test Test All Lamps Row & Column Lamp Tests...............................22
] Lamp Matrix Grid
] Lamp Matrix Grid Locations, Typical Lamp Wiring & Schematic, Bulb Types used for Lamps.............................................. 23
6HFWLRQ & KD SW H U R I %DFNER[:LULQJ
7DEOHRI&RQWHQW V
x&KDSWHU%DFNER[:LULQJ &2,/6'(7$,/('&+$577$%/( %DFNER[,23RZHU'ULYHU%RDUG'HWDLOHG:LULQJ'LDJUDP %DFNER[%RDUG/D\RXW:LULQJ'LDJUDP x&KDSWHU3OD\ILHOG:LULQJ *HQHUDO,OOXPLQDWLRQ&LUFXLW'HWDLOHG:LULQJ'LDJUDP 3OD\ILHOG6ZLWFK:LULQJ'LDJUDP3OD\ILHOG/DPS:LULQJ'LDJUDP 3OD\ILHOG7HUPLQDO6WULSV)XVHV0LVF:LULQJ'HVFULSWLRQV/RFDWLRQV )OLSSHU&LUFXLW:LULQJ'LDJUDP x&KDSWHU&DELQHW:LULQJ 7UDQVIRUPHU3RZHU:LULQJ'LDJUDP &DELQHW&RLQ'RRU:LULQJ'LDJUDP All 11 X 17 Schematics
and other PDF files are
also available on CD-ROM.
%DFNER[
:LULQJ
7URXJK8S.LFNHU'XDO2372%RDUGV7KHRU\RI2SHUDWLRQ6FKHPDWLF 7RS
7URXJK8S.LFNHU'XDO2372%RDUGV&RPSRQHQW/D\RXW3DUWV %RW
23727URXEOHVKRRWLQJ 7RS
7URXJK'XDO2372%RDUGV$OLJQPHQW7HVWVIRU/('/(' 'RW0DWUL['LVSOD\'LVSOD\&RQWUROOHU%G&RPELQHG'LVSOD\&RQQHFWLRQV 'LVSOD\3RZHU6XSSO\%RDUG6FKHPDWLF&RPSRQHQW/D\RXW3DUWV 'LVSOD\&RQWUROOHU%RDUG6FKHPDWLF 'LVSOD\&RQWUROOHU%RDUG&RPSRQHQW/D\RXW3DUWV ,23RZHU'ULYHU%RDUG7KHRU\RI2SHUDWLRQ ,23RZHU'ULYHU%RDUG6FKHPDWLF
6KHHW RI 6KHHW RI 6KHHW RI 6KHHW RI 6KHHW RI ,23RZHU'ULYHU%RDUG&RPSRQHQW/D\RXW ,23RZHU'ULYHU%RDUG3DUWV &386RXQG%RDUG,,ZLWK$70(/3URFHVVRU7KHRU\RI2SHUDWLRQ &386RXQG%RDUG,,ZLWK$70(/3URFHVVRU6FKHPDWLF
6KHHW RI 6KHHW RI 6KHHW RI 6KHHW RI &386RXQG%RDUG,,ZLWK$70(/3URFHVVRU&RPSRQHQW/D\RXW &386RXQG%RDUG,,ZLWK$70(/3URFHVVRU3DUWV 8.6SHFLDO$SS;7UDQVLVWRU'ULYHU%G6FKHPDWLF&RPSRQHQW/D\RXW 8.;7UDQVLVWRU'ULYHU%GIRU8S3RVWV3)'RW'LVSOD\RU/('6LJQLIXVHG 8.;7UDQV'ULYHU%RDUGZLWKWKH7RXUQDPHQW6HULDO,QWHUIDFH76,%RDUG $X[;7UDQV'ULYHU%RDUGZLWKWKH76,%RDUGDQG7LFNHW,QWHUIDFH 7RXUQDPHQW6HULDO,QWHUIDFH%RDUG6FKHPDWLF 7RXUQDPHQW6HULDO,QWHUIDFH%RDUG&RPSRQHQW/D\RXW 6HFWLRQ&KDSWHU
3DJH
6HF6FKHPDWLFV
Visit www.SternPinball.com/schematics.htm for the latest 11" X 17" Schematics (or "Split 8-1/2" X 11") for the Display Power Supply, Display Controller, I/O Power
Driver & CPU/Sound Boards (White Star• System Only). Along with the schematics you’ll find the component layout and theory of operation. Keep visiting as these files
are continuously improved with more "search" links in the documents. The files are in PDF Format (Adobe® Reader required). They may be slow to open in the website only,
but once on your harddrive they’ll open fast. Inside the schematics you can utilize internal links where addresses may direct you to another sheet in the schematic set (further
instructions within documents). To "download" once open, in your browser click "File" "Send" "Page by eMail". It will be sent to your eMail Address, where there you can save
the file to your hardrive.
x&KDSWHU3ULQWHG&LUFXLW%RDUGV3&%V Use the below Coils Detailed Chart Table in conjunction with Sec. 5, Chp. 1, Backbox I/O Power Driver Board
Detailed Wiring Diagram (I/O Board Connectors J6, J7, J8 & J9) and Backbox Board Layout Wiring Diagram:
+LJK &XUUHQW &RLOV *URXS &2,/6'(7$,/('&+$577$%/(
Drive
Driver
Transistor Ouput Board
#1
TROUGH UP-KICKER
Q1
#2
AUTO LAUNCH
Q2
#3
ELVIS 5-BANK RESET
Q3
#4
(OPT) SHAKER MOTOR
Q4
#5
MAGNET
Q5
#6
CENTER EJECT
Q6
#7
HOTEL LOCK RELEASE
Q7
#8
CONTROL GATE
Q8
+LJK &XUUHQW &RLOV *URXS #9
LEFT BUMPER
I/O
Power
Driver
6
Drive
Driver
Transistor Ouput Board
Q9
#10 RIGHT BUMPER
Q10
#11 BOTTOM BUMPER
Q11
#12 TOP EJECT
Q12
#13 UPPER LEFT FLIPPER
Q13
#14 UPPER RIGHT FLIPPER
Q14
#15 LEFT FLIPPER (50v RED/YEL)
Q15
#16 RIGHT FLIPPER (50v RED/YEL)
Q16
/RZ &XUUHQW &RLOV *URXS 5
5
I/O
Power
Driver
6
Drive
Driver
Transistor Ouput Board
#17 LEFT SLINGSHOT
Q17
#18 RIGHT SLINGSHOT
Q18
#19 HOTEL DOOR
Q19
#20 FLASH: BACK PANEL X2
Q20
#21 FLASH: BACKPANEL TCB
Q21
#22 FLASH: SPINNER
Q22
#23 FLASH: UPR RT FLIPPER X2
Q23
#24 OPTIONAL COIL
Q24
5
I/O
Power
Driver
6
Power Line
Color
Power Line
Connection
Power
Voltage
Drive Transistor
Control Line Color
D.T. Control
Line Connect
Coil GA-Turn
or Bulb Type
YEL-VIO
J10-P4/5 50v DC
BRN-BLK
J8-P1
YEL-VIO
J10-P4/5 50v DC
BRN-RED
J8-P3
YEL-VIO
BRN-ORG
J8-P4
BRN-YEL
J8-P5
Motor Only
VIO-YEL
J10-P4/5 50v DC
v AC
J17-P7 16
12v DC
J10-P3 50v DC
!
23-8000 !
090-5001-00B
24-9400 !
090-5036-00B
BRN-GRN
J8-P6
22-6500
YEL-VIO
J10-P4/5 50v DC
BRN-BLU
J8-P7
YEL-VIO
J10-P4/5 50v DC
BRN-VIO
J8-P8
YEL-VIO
J10-P4/5 50v DC
BRN-GRY
J8-P9
Power Line
Color
Power Line
Connection
Drive Transistor
Control Line Color
D.T. Control
Line Connect
YEL-VIO
J10-P4/5 50v DC
BLU-BRN
J9-P1
26-1200
26-1200
RED-WHT
Power
Voltage
090-5044-00B
!
24-9400 !
090-5036-00B
23-8000 !
090-5001-00B
32-1800 !
090-5031-00B
041-5029-01
090-5042-00
Coil GA-Turn
or Bulb Type
J10-P4/5 50v DC
BLU-YEL
J9-P5
J10-P1/2 50v DC
BLU-GRN
J9-P6
J10-P1/2 50v DC
BLU-BLK
J9-P7
J10-P1/2 50v DC
ORG-GRY
J9-P8
J10-P1/2 50v DC
ORG-VIO
J9-P9
!
!
090-5044-00T
26-1200 !
090-5044-00T
24-9400 !
090-5036-00B
23-9000 !
090-5020-30
23-9000 !
090-5020-30
22-9000 !
090-5020-20T
22-9000 !
090-5020-20T
Coil GA-Turn
or Bulb Type
YEL-VIO
J10-P4/5 50v DC
BLU-RED
J9-P2
YEL-VIO
J10-P4/5 50v DC
BLU-ORG
J9-P4
YEL-VIO
GRY-YEL~3A
Fuse~RED-YEL
BLU-YEL~3A
Fuse~RED-YEL
GRY-YEL~3A
Fuse~RED-YEL
BLU-YEL~3A
Fuse~RED-YEL
26-1200
090-5044-00T
Power Line
Color
Power Line
Connection
Power
Voltage
Drive Transistor
Control Line Color
D.T. Control
Line Connect
BROWN
J7-P1
20v DC
VIO-BRN
J7-P2
BROWN
J7-P1
20v DC
VIO-RED
J7-P3
BROWN
J7-P1
20v DC
VIO-ORG
J7-P4
ORANGE
J6-P10
20v DC
VIO-YEL
J7-P6
ORANGE
J6-P10
20v DC
VIO-GRN
J7-P7
ORANGE
J6-P10
20v DC
VIO-BLU
J7-P8
#906 Bulb
ORANGE
J6-P10
20v DC
VIO-BLK
J7-P9
#906 Bulb
RED
J16-P7
5v DC
VIO-GRY
J7-P10
Opt. 5v
Power Line
Color
Power Line
Connection
Power
Voltage
Drive Transistor
Control Line Color
D.T. Control
Line Connect
GRY-RED
J16-P3
12v DC
RED
J6-P1
GRY-RED
J16-P3
12v DC
GREEN
J6-P2
GRY-RED
J16-P3
12v DC
BLACK
GRY-RED
RED-WHT TO
BROWN
RED-WHT TO
BROWN
ORANGE
J16-P3
12v DC
!
23-8000 !
090-5001-00T
27-1500 !
090-5004-00B
23-8000
090-5001-00T
#89 Bulb
165-5000-89-HF
#89 Bulb
165-5000-89-HF
165-5004-00
165-5004-00
D iode O n T erminal S trip (if noted)
/RZ &XUUHQW &RLOV *URXS Drive
Driver
Transistor Ouput Board
#25 STEPPER #1
Q25
#26 STEPPER #2
Q26
6HF6FKHPDWLFV
#27 STEPPER #3
Q27
#28 STEPPER #4
Q28
#29 ELVIS LEGS
Q29
#30 ELVIS ARMS
Q30
#31 FLASH: ELVIS SPOT LIGHT
Q31
5
I/O
Power
Driver
6
J7-P1
J7-P1
J6-P10
BLUE
RED-WHT
TO
20v DC
BLK-GRN
TO
20v DC RED-WHT
BLK-BLU
20v DC
BLK-VIO
J6-P3
J6-P4
Coil GA-Turn
or Bulb Type
Stepper
Motor
Only
041-5069-00
J6-P6
!
29-1400 !
090-5072-03
J6-P7
#906 Bulb
J6-P5
29-1400
090-5072-03
165-5004-00
#906 Bulb
Q32
ORANGE
J6-P10 20v DC
BLK-GRY
J6-P8
#32 FLASH: SLINGS X2
165-5004-00
1RWH ,Q 7HVW )ODVK /DPSV 0HQX )ODVK ,FRQ )ODVKHUV WHVWHG DUH DOO )ODVK /DPSV ORFDWHG EHWZHHQ 44 7KLV *DPH 44 44
$X[LOLDU\ 8. 21/<
AUX 1: LEFT UP/DOWN POST
!
Drive
Driver
Transistor Ouput Board
Q1
Power Line
Color
Power Line
Connection
Power
Voltage
20v DC
Drive Transistor
Control Line Color
D.T. Control
Line Connect
Coil GA-Turn
26-1200
!
!
!
BROWN
J7-P1
WHITE
J2-P3
UK 3X
090-5044-00T
Trans.
23-1100
20v DC
BROWN
J7-P1
RED
J2-P4
AUX 2: CENTER UP/DOWN POST Q2
090-5030-00T
Driver
26-1200
Q3
20v DC
BROWN
J7-P1
ORANGE
J2-P7
AUX 3: RIGHT UP/DOWN POST
Board
090-5044-00T
Coil Note: Either -00B or -00T can be used for coil replacements. B/T listed is preferable for easier diode access & may differ on game.
!
6HFWLRQ&KDSWHU
3DJH
%DFNER[
:LULQJ
6HFWLRQ & KD SW H U R I 6HF$IWHU6HW8S
$IWH U6 H W 8S
3LQEDOO*DPH6HW 8S3URF HGXU HV
...after reading the Pinball Game Set-Up
Instruction Sheet (SPI Part Nº 755-5310-00)
included with your New Pinball Game,
continue with the below procedures:
:LWKWKH%DFN*ODVV5HPRYHG
1. Check all connectors in the Backbox for
loose wire terminations. Reseat any loose wire
by pushing in on the terminal. Push on all
connectors plugged into the CPU/Sound Board,
I/O Power Driver Board, and the Display Power
Bd. to check that they are properly seated.
Ensure Fluorescent Light Tube is seated
correctly. Check that all fuses are seated
properly. Close and lock the Backbox and
secure its’ keys back inside the Coin Door.
:LWKWKH 3OD\ILHOG*ODVV5HPRYHG
2. Remove all shipping tie downs, shipping
blocks, packing foam, etc., if present. READ
ALL PRINTED INFORMATION! Shipping
Instructions and/or Decals describe warnings,
cautions, and/or important information specific
to the game. SAVE ALL IN CABINET!
If pinballs were already installed into the Ball
Trough (under the arch), remove them before
performing the following step. ***Pinballs can
fall out and away from the playfield ***
3. Raise the playfield and rest it against the
Backbox. See the illustration "Easy Access
Service System - 2 Positions" on Page 4.
4. Visually inspect all cabinet cables and
connector terminations; ensure no wires or
cables are pinched and that cable harnesses
are not pulled tight.
5. Make sure the proper amount of pinballs are
installed (Amount of balls are always specified
on decal attached to the lock down assembly and at the top of the inside cover).
6. Lower the playfield and ensure game is level side-to-side by adjusting Leg Levelers, if required. See the
illustration "Leg Leveler Adjustment" on Page 4. Start with the Leg Levelers turned all the way in (1.25"
from floor to bottom of leg), depending on the condition of the floor, adjust the Leg Levelers as required until
the game pitch is 6.5°, determined by the Bubble Level.
USE THE BUBBLE LEVEL ON THE WOOD RAIL (LOWER RIGHT) TO DETERMINE IF LEVEL IS ACHIEVED.
BUBBLE SHOULD APPEAR BETWEEN THE 2 BLACK LINES. SEE PAGE 4 FOR AN ILLUSTRATION.
7KHSOD\ILHOGLQFOLQHDIIHFWVGLII LFXOW\ RISOD\8VHWK HUHFRPPHQGHG
LQFOLQH*DPHGLIILFXOW\LVEHVWYDULHGXVLQJJDPHDGMXV WPHQWV
:LWKWKH&RLQ'RRU2SH Q
7. If desired, perform any self tests at this time (see Section 3, Chapter 1, Portals Service Menu Introduction,
and Chapter 2, GO TO DIAGNOSTICS MENU, for instructions on how to enter "Begin Play Test" and "Game
Name Test" Menus to test components on the game).
8. If desired, adjust Game Pricing, Standard and/or Custom (see Section 3, Chapter 4, GO TO ADJUSTMENTS
MENU and Section 3, Chapter 5, GO TO INSTALLS MENU to adjust Game Difficulty, 3- or 5-Ball Play, Home
or Tournament Settings, Novelty, Add-A-Ball, etc.).
Per CE: "The
appliance has
to be placed in
a horizontal
position." "This
appliance is
not to be
cleaned by a
Water Jet."
$IWHU6HW8S
6HFWLRQ&KDSWHU
3DJH
3L QEDO O*DPH6HW 8S)XW XU H5HIHUHQFH
Open up the Printable Version in
both 8-1/2 X 11 & 11 X 17.
6HF$IWHU6HW8S
6HFWLRQ&KDSWHU
3DJH
$IWHU6HW8S
6HF$IWHU6HW8S
3L QE DO O*DPH6HW 8S)XW XU H5HIHUHQFH&RQW LQXHG
$IWHU6HW8S
6HFWLRQ&KDSWHU
3DJH
+RZWR6HFXUHWKH%DFNER[IRU7UDQVSRUWLQJ
6HF$IWHU6HW8S
For more Backbox details & part numbers, see Section 4,
Chapter 1, Backbox Assembly, Pages 60-61.
/HJ/HY HOHU$GMXVWPHQW
Attach the four (4) Leg Assemblies to cabinet corners with the eight (8) leg bolts provided .
Cabinet Leg
Start adjustment with the leg levelers turned all the way
in.
View the bubble in the level provided on the right side
wood rail.
Bubble Level
located on
the wood rail
next to the
Shooter Lane.
Bubble
Bubble
should be
between
the 2 black
lines.
3e -16
8
Hex
Nut
Adjust the front or rear levelers as necessary to cause
the bubble to float between the two (2) black lines.
Use a pinball to roll down the center of the playfield for
side-to-side leveling.
YOUR PLAYFIELD PITCH IS NOW AT 6.5° AS
REQUIRED FOR PROPER GAME PLAY!
Leg Leveler
turned all
the way in.
Note: For custom adjustment greater than >6.5° can be achieved by turning out the rear leg leveler(s), however, it is not recommended.
(D V\$FF HVV6HU Y LF H6\VW HP 3RVL WL RQV
With the front molding & glass removed, carefully lift the playfield (take care when using the Bottom Arch to hoist).
Position 1
When lifted high enough, the Playfield Support
Slide Brackets (Fig. 1A) can be seen and can clear
the cabinet front (Fig. 1B). At this time, pull the playfield toward the front of the cabinet, checking that the
mechanical components clear the cabinet front, then
rest the playfield on the Playfield Support Slide
Brackets at the front channel of cabinet (Fig. 1C);
Position 2
With the playfield at rest, hold the sides & pull toward
the front of the cabinet (approx. 6" to 8"), until
resistance is felt from Edge Slide Brackets stopping
against the Slide & Pivot Support Brackets located
on either side of the cabinet (Fig. 2A). At this time,
swivel the playfield toward the Backbox, then rest on
the top edge (Fig. 2B & 2C).
6HFWLRQ&KDSWHU
3DJH
$IWHU6HW8S
6HFWLRQ & KD SW H U R I *DP H 2SHUDWLR Q)HDWXUHV
6WDUWLQJD1RUPDO*DPH
Insert coin(s). The game generates a sound for the
first coin & for each subsequent coin with the display
indicating the number of credits posted. Press the
Start Button and a start-up sound is produced, and
the posted credits are reduced by one. Subsequent
players can be added (up to 4 can play!) by pressing
the Start Button before the end of ball 1 (with
sufficient credit in the game).
The display now indicates the player or # of players
selected from the total depressions of the Start
Button. The display indicates the ball in play, and a
ball is served to the Shooter Lane. An introduction is
shown followed by Skill Shot Graphics and/or instructions. Pressing the Start Button after ball 1 of any
player will start a new game (if credits are available),
but only if the Start Button is depressed for 2-3
seconds. This delay is to avoid accidental "re-starts"
of a game. Note: Any partial credit remaining during
game play after the end of ball 1, or power down, will
be eliminated.
6WDUWLQJ7HDP3OD\ 'RXEOH V This option is adjustable with Standard Adj. 50, Team
Scores (Default = NO). If Standard Adj. 50, Team
Scores is changed to YES, then Team Play will be
made available. Team Play only works in a 4-Player
Game. The totals for Players 1/ 3 (Team 1) & Players
2 / 4 (Team 2) are then displayed individually as well
as the combined score for BOTH TEAMS.
6WDUWLQJ7RXUQDPH QW3OD\ZLWK
This Pinball Game is ToPS (Tournament Pinball
System) Ready. Optional Tournament equipment &
hardware (sold separately) is required. Review
Section 3, Chp. 7, GO TO TOURNAMENT MENU, for
more info!
Unlike a "Normal Game", the Tournament Game is
started by depressing the Tournament Start Button
(located on the Front Molding, if installed). If adequate
credit(s) are posted and a Tournament is started via
Portals (select the "TOUR" Icon in the Main Menu),
the Tournament Start Button will flash. Any adjustments or installs changed will not be in affect. Starting
a Tournament Game defaults to preprogrammed
Tournament Rules (e.g. No Extra Balls, Specials or
Bonus Credits are awarded); however, starting a
Normal Game after a Tournament Game will then
revert back to any unique adjustments or installs
performed previously. During and End of Game
Features operate in the same manner (differences in
adjustment defaults are present).
'X UL QJ*DPH)HDW XU HV
)HDWXUH0RGH&RPELQDWLRQ6KRWV
Features are lit on the playfield and started by
completing certain shots (e.g. completion of Target
Banks, Orbit(s), Ramp(s) and/or any combination of
the shots).
0XOWLEDOO
Multiball is started after completion of certain features
(amount of balls used depends on game rules).
5HSOD\)HDWXUH
Replay awards are given as the player exceeds a High
Score Level during game play. This can be adjusted
with Standard Adj. 3, Replay Award (Default =
CREDIT). Players exceeding the High Score Levels
can receive: CREDIT, EXTRA BALL, or SPECIAL.
Adjust to NONE if a replay award is not desired.
(QGRI*DPH)HDWX UHV
*DPH (QGLQJV
When all player(s) have played all balls (including any
Extra Balls), the game ends. If power is interrupted
during the course of a game, it will end that game (see
Starting a Normal Game). Closure of the Plumb Bob
Tilt Switch according to the number of tilts set,
Standard Adj. 15, Tilt Warnings (Default = 01) or
prolonged closure, will end the current Ball-In-Play.
Closure of the Slam Tilt Switch on the Coin Door ends
the current game(s).
0DWF K)HDWXUH
At the end of each ball, earned bonuses are collected.
At the end of the last ball of a game (including any
extra balls, if applicable), earned bonuses are collected, then the system produces a random 2-digit
number (a multiple of 10; 00 to 90). Matching the last
2 digits of the player’s score with this number awards a
credit. In Std. Adj. 13, Match Percentage (Default =
8%) can be changed from 0-10%. Changing the
percentage to 0% displays the "Match Animation" at
the end of the game, however, will never match nor
award anything. Changing this adjustment to OFF will
not display the "Match Animation" nor award anything.
(QWHULQJ,QLWLDOV1DPH
If player achieved a new High Score in a game or
achieved a Special Feature (if given) the player may
enter 3 Initials. In Std. Adj. 29, High Score Initials
(Default = 3 Initials) can also be changed to 10-Letter
Name. Use the Flipper Buttons to choose a letter or
character as seen on the Dot Display. Hitting the Start
Button locks in the letter or character and proceeds to
the next letter. The game then proceeds into the
Game-Over Mode and then to the Attract Mode.
Note: Standard Adj. 31, Custom Message (Default
= ON) can be displayed during the Attract Mode; enter
letters in the same fashion.
For more details on Adjustments, see Sec. 3, Chp. 4.
Continued Next Page.
*DPH2SHUDWLRQ
)HDWXUHV
6HFWLRQ&KDSWHU
3DJH
6HF*DPH2S
6W DU WRI*D P H)HDW XU HV
$XWR3HUFHQWDJLQJ
This game is equipped with Auto Percentaging, Standard Adj. 01, Replay Type (Default = AUTO, adjustable).
The Replay Percent is automatically adjusted, Standard Adj. 02, Replay Percentage, or you can set a Fixed
Replay Score. Four levels may be selected. Adjustments allow awarding of a "CREDIT" (or your setting) as each
level is exceeded. This can be adjusted with, Standard Adj. 03, Replay Award (Default = CREDIT). With the
Autopercentage Feature, if the actual replay percent- age is higher or lower than that desired, the game will
automatically adjust for the new recommended percentage score(s). You may choose to make a different
"score-to-beat" adjustment; this is done by utilizing Standard Adj. 04, Replay Levels. For more details with
Adjustments, see Section 3, Chapter 4, GO TO ADJUSTMENTS MENU; also, see see Section 3, Chapter 5, GO
TO INSTALLS MENU for further customization of your Pinball Game.
6HF*DPH2S
, QVW UX FW LRQ&D UG
Below is a COPY of the Game Instruction Card (SPI Nº: 755-5184-00 USA). For a replacement Game Instruction
Card on Astrobright Solar Yellow Card Stock, add -Y to the end of the Part Number above. If your card is lost or
damaged, simply COPY this page and cut out the card as a temporary replacement until a new card is ordered.
(Hint: COPY & CUT along the dotted line and fold in the center to keep the "COPY" sturdy.)
COPY &
CUT
FOLD
HERE
)RUPRUHGHWDLOHGJDPHUXOHVYLVLWRXUZHEVLWH#
ZZZ6WHUQ3LQEDOOFRPDQGFOLFNRQWKH
(OYLVŠRU*DPH$UFKLYH
3RS%XPSHU/LQN
Click on
card to
open the
Instruction
Card for
printing.
6HFWLRQ&KDSWHU
3DJH
*DPH2SHUDWLRQ
)HDWXUHV
6HUYLFH6ZLWFK6HW5HG*UHHQ%ODFN%XWWRQV$FFHVV8VH
The Service Switch Set provides access for three (3)
functions available for your use. They are Volume
Menu, Service Credits Menu and Portals• Service
Menu. All are accessed separately depending on which
colored button (Red, Green or Black) is pushed first.
D
5HG
*UHHQ
,QVLGH &RLQ 'RRU
,I &RLO )ODVKODPS 7HVWLQJ
WKH 3OD\ILHOG
3RZHU ,QWHUORFN
6ZLWFK PXVW EH
SXOOHG RXW
%ODFN
7KH 0HPRU\
3URWHFW 6ZLWFK LV
GLVDEOHG ZKHQ WKH
&RLQ 'RRU LV RSHQ
UHTXLUHG IRU DQ\
FKDQJHV
To access any of these three (3) functions you must first open the
Coin Door (see pictorial above) with the Game in the Attract Mode
(not already in any Function or Menu stated below).
3XVKLQJ
5HG VW
)XQFWLRQ9ROXPH0HQX
6HF0HQX,QWUR
Pushing the Red "VOLUME" Button first, enters the Volume
Menu. While in this Mode, to DECREASE the volume, hold down
or depress the Red "LEFT" Button until desired the volume is
achieved; to INCREASE the volume, hold down or depress the
Green "RIGHT" Button until the desired volume is achieved.
Note: Pushing the Left or Right Flipper Buttons operates the same as the Red
or Green Buttons of the Service Switch Set, while in this Volume Mode.
Set between 0-31; Once your adjustments are made, this menu will
automatically exit a few seconds after the last button depression.
)XQFWLRQ6HUYLFH&UHGLWV0HQX
3XVKLQJ
*UHHQ VW
Pushing the Green "SERVICE CREDITS" Button first, adds
Service Credits (will not affect your audits as "paid" credits).
This is useful for the technician to test games in regular play without
affecting the game audits. Each depression adds 1 credit; up to 50
credits can be applied. Std. Adj. 16, Credit Limit, determines this,
however, it can be changed from 04-50; for details see Chapter 4 of
this Section 3. Once your credits are added, this menu will
automatically exit a few seconds after the last button depression.
Note: This function is disabled if Standard Adjustment 30, Free Play, is set to
YES. The Service Credits are limited to the Credit Limit in addition to any paid
credits present in the game (e.g. If the Credit Limit is 30, and there are 8 paid credits
present, only 22 Service Credits can be applied.).
3XVKLQJ
%ODFN VW
)XQFWLRQ3RUWDOV• 6HUYLFH0HQX
Pushing the Black "BEGIN TEST" Button first, enters the
Portals• Service Menu. Once in, navigate through all menus
depressing the Red "LEFT" or Green "RIGHT" Buttons.
Note: Pushing the Left or Right Flipper Buttons operates the same as the Red
or Green Buttons of the Service Switch Set, while in this Service Mode.
Select or activate the Icon chosen (the Icon will be "flashing") by
pushing down or depressing the Black "ENTER" Button.
Note: Pushing the Start Button operates the same as the Black Button
of the Service Switch Set, while in this Service Mode.
Please read the remainder of this Chapter for more information on the Portals• Service Menu. The remaining six
(6) Chapters of this Section explains all Icons & Menus in detail. Read! Read! Read!
6HFWLRQ&KDSWHU
3DJH
3RUWDOV• 6HUYLFH
0HQX,QWURGXFWLRQ
open
Adjustments
3R UW DO V • 6HU YLFH0HQX,QW URGX FWLRQ
Important: The Dual Switch Bracket holds the Playfield Power Interlock & Memory Protect Switches. It is
located just inside the Coin Door frame (see pictorial of the Coin Door on the previous page). The Button Switch
at the top is the Playfield Power Interlock Switch. It must be pulled out for electro-mechanical device testing or
diagnostic purposes (this is required). If this button is pushed in, the Playfield Power is disabled while the Coin
Door is OPEN. The Button Switch at the bottom is the Memory Protect Switch. It is enabled while the Coin
Door is CLOSED; meaning any adjustment changes that are made will not be written to memory. If changing
adjustments is required, ensure the Coin Door is OPEN to disable this switch, thus allowing for desired changes.
+RZWR8VH 7KLV6H FWLRQ
This section will cover all functions available in the Portals• Service Menu in a Step-By-Step process. This
section is divided into chapters which coincide with the MAIN MENU. The previous and following pages in this
Chapter will instruct the operator on how to move through the Menus. It’s simple, easy and fun to use!
To get into the Service Menu Mode review "Function 3, Portals• Service Menu" on the previous page. After
Power-Up, push down the Black "BEGIN TEST" Button to begin. Looking at the display you will momentarily see
"Service Menu" with a satellite flying from right to left pulling a banner "Portals©TM" followed by the MAIN MENU:
Use the Red "LEFT" & Green "RIGHT" Buttons (or Left & Right Flipper Buttons) to move the selected Icon
left or right, and the Black "ENTER" Button (or Start Button) to activate the selected Icon. The use of the
Service Switch Set (Red, Green, & Black Buttons) is required in Switch Test or Active Switch Test, as the
Start & Flipper Buttons are a part of this test.
The MAIN MENU now appears with the "DIAG" Icon (GO TO DIAGNOSTICS MENU) flashing:
As the operator views the Menu Screen(s), the
symbols indicates that there are more Icons to select in
each direction. The Icon selected will blink. Pushing the Black "ENTER" Button (or Start Button) will select the
Icon and the Menu Screen will change to the menu selected. Select the "PREV" Icons to move backwards
through the menu levels. Select the "QUIT" Icon to completely exit the Service Mode.
View the Portals• Service Menu Icon Tree on the next pages for a complete overview of all menus used in this
system. The "HELP" Icon & "?" Mini-Icon provide explanation of ICON usage in the Menu where the "HELP" Icon
or "?" Mini-Icon was selected. View QUIT THIS SESSION (Exiting the Portals• Service Menu) at the end of this
chapter (reference Section 3, Chapter 1, Portals• Service Menu Introduction).
The chapters in this section, which coincide with the MAIN MENU, will also provide more detailed information.
Use both the manual and the display to help customize, troubleshoot and/or diagnose faults, if any.
3RUWDOV• 6HUYLFH
0HQX,QWURGXFWLRQ
6HFWLRQ&KDSWHU
3DJH
6HF0HQX,QWUR
back to
Page 8
Section 3, Chapter 1
Page 10
STANDARD FEATURE CUSTOM
ADJUST- ADJUST- MESSAGE
MENTS
MENTS
XX
ADJUSTMENTS MENU
XX
XX
COIL MENU
PRINTER MENU
XX
TECHNICIAN
ALERTS
CYCLING
COIL
TEST
CLEAR
BALL
TROUGH
*
SINGLE
COIL
TEST
TEST
FLASH
LAMPS
*
SINGLE
LAMP
TEST
SERVICE
PHONE
#
BEGIN
PLAY
TEST
ROW
LAMP
TEST
DOT
MATRIX
TEST
ELVIS®
TEST
X
GO TO
FUSE
TABLE
SWITCH
FLOW
CHART
LAMP
FLOW
CHART
Move LEFT or
RIGHT, select
previous/next
or move
backwards/
forwards.
END current
coil selection
to select a new
coil for diagnosing in Dr.
Pinball Menus.
Note:
If a new MINIICON is used for
a specific
function, select
the "?" Icon for
more information.
Answer NO or
YES for Flow
Chart Menu
questions in
Dr. Pinball
Menus.
View HELP
Screens of the
current Menu.
View the
schematic
(DRAWing) of
current display.
Select while current
switch, lamp or coil
PULSE coil.
is viewed.
QUIT, exits &
returns to the
Attract Mode.
RUN (or activate) selected
test or coil.
Return to the
PREVIOUS
Menu.
DECREMENT
(-) or
INCREMENT
(+) displayed
value or select
previous/next.
Note:
In Sub-Menu
Tests or Displays,
further action is
required: select &
activate the
appropriate MiniIcon(s).
TM
SELECTING
THIS ICON
IN ANY
MENU
WILL
EXIT
PORTALS,
AND WILL
RETURN
TO THE
ATTRACT
MODE.
DR. PINBALL MENU
COIL
FLOW
CHART
DR.
PINBALL
XX
These non-selectable
Icons appear in the
selected Menu only when
there are MORE Icons to
the LEFT or to the RIGHT
available for selection.
Explanation & usage of common Large & Mini-Icons used in various Menus & Sub-Menus:
COLUMN
LAMP
TEST
SOUND/
FIRE
KNOCKER SPEAKER
TEST
X
LAMP MENU
TEST
ALL
LAMPS
*
DIAGNOSTICS MENU
BEGIN
BURN
IN
QUIT
GO TO
THIS
TOURNAMENT
X
SESSION
MENU
CONTINUED NEXT PAGE.
GO TO
RESET
MENU
MAIN MENU
GO TO
GO TO
GO TO
INSTALLS
AUDITS ADJUSTMENTS
X
MENU
MENU
MENU
OPTIONAL
PRINTOUT KIT
(sold separately)
IS REQUIRED
FULL
RESET FOR OPERATION
QUICK
PRINTOUT PRINTOUT PRINTER OF THIS MENU.
EARNINGS STANDARD FEATURE GO TO
AUDITS PRINTER
AUDITS
AUDITS
MENU
XX
XX
XX
AUDITS MENU
SWITCH MENU
ACTIVE DEDICATED
x
SWITCH SWITCH
TEST
TEST
SWITCH
TEST
XX
GO TO
LAMP
MENU
GO TO
COIL
MENU
GO TO
SWITCH
MENU
*
ENTERING THESE NOTED MENUS, YOU MUST PULL OUT
*theWHEN
Power Interlock Switch for operation with the Coin Door open.
GO TO
DIAGNOSTICS
X
MENU
Portals™Service Menu Icon Tree
502-5031-00
Portals™ Service
Menu Introduction
Portals™ Service
Menu Introduction
RESET
GAME
AUDITS
RESET
HIGH
SCORES
A-B
RESET FACTORY
CREDITS
RESET
XX
XX
INSTALL
HARD
XX
TM
INSTALL INSTALL INSTALL
EXTRA DIRECTORS 3-BALL
HARD
CUT
XX
AFTER
FACTORY
RESET IS
INSTALLED,
YOU WILL
THEN EXIT
PORTALS,
AND WILL
RETURN
TO THE
ATTRACT
MODE.
MENT
MENT
PRIZES
AUDITS
QUIT
GO TO
THIS
TOURNAMENT
X
SESSION
MENU
Section 3, Chapter 1
Page 11
Sec. 3: ...Menu Intro.
$ .50 FREE PLAY INSTALL
INSTALL
5-BALL COMPETI- COMPETI- HOME
TION
TION
PLAY
XX
I N S TA L L S M E N U
GO TO
RESET
MENU
MAIN MENU
GO TO
GO TO
GO TO
X
INSTALLS
AUDITS ADJUSTMENTS
MENU
MENU
MENU
502-5011-00
OPTIONAL
TOURNAMENT KIT
(sold separately)
IS REQUIRED
FOR OPERATION
XX
SIGN
TOURNA- TOURNASTOP
START
TOURNAMENT
OF THIS MENU.
ADJUST- TOURNA- TOURNAX
MENT MESSAGES
MENT
MENTS
INSTALL
NORMAL
XX
TOURNAMENT MENU
RESET
COIN
AUDITS
INSTALL
EASY
XX
RESET MENU
INSTALL
EXTRA
EASY
Note: After selection of any of the
1st 13 Install Icons, the request is
installed and returns to the Install
Menu. The last icon activated
before exiting this menu will supercede
any previous Icon selected in the group.
GO TO
DIAGNOSTICS
X
MENU
SEE PREVIOUS PAGE.
INSTALL
NOVELTY
XX
INSTALL
ADD-ABALL
INSTALL
FACTORY
XX
For more detailed information on these Menus,
review Chapters 1-7 in this Section 3.
Chapter 2 Chapter 3 Chapter 4 Chapter 5 Chapter 6 Chapter 7
FILM
STAR
RESET
TM
SELECTING
THIS ICON
IN ANY
MENU
WILL
EXIT
PORTALS,
AND WILL
RETURN
TO THE
ATTRACT
MODE.
Note: After selection of any of the
1st 4 Reset Icons, the request is
installed and returns to the Reset
Menu. Selecting a "FACT" Icon,
the request is installed and exits the
Portals™ Service Menu System.
Portals™Service Menu Icon Tree Continued
Portals™Service Menu Icon Tree Continued
3RUWDOV • 6HU YLFH0HQX([DPSOH
This example will demonstrate activation of Icons in the DIAGNOSTICS MENU. The example will show activation
of the "SW" Icon (GO TO SWITCH MENU). In this menu, the switches can be tested individually and also all
active switches can be tested. Use the same technique to access all the Icons in the Portals• Service Menu.
Follow Portals• Service Menu Icon Tree on the previous pages as a guide to help navigate through the entire
system (Also, go to the chapter in this manual explaining the icon(s) selected.).
D
If the display is in any other menu other than the MAIN MENU, use the Red "LEFT" & Green "RIGHT" Buttons
to select the "PREV" Icon and press the Black "ENTER" Button to activate the ICON thus moving back to the
previous menu. Do so until MAIN MENU appears.
Chapters 2 through 7 will cover all menu items within the Portals• Service Menu. The Icon is shown preceding
the text. Find the Icon in the Portals• Service Menu by navigating with the Red or Green Buttons. Each chapter
started is from the MAIN MENU. Within the chapter, and Sub-Menu will be covered sequentially with their
explanation & function. If the operator "gets lost", select and activate the "PREV" Icon until the display indicates
MAIN MENU. For more help on Button Usage, select & activate the "HELP" Icon or "?" Mini-Icons.
6HF0HQX,QWUR
([ DPSOH
After entering Portals• , the MAIN MENU now appears with the "DIAG" Icon (GO TO DIAGNOSTICS MENU)
flashing:
Press the Black "ENTER" Button to activate this ICON. The DIAGNOSTICS MENU now appears with the
"SW" Icon (GO TO SWITCH MENU) flashing:
6HFWLRQ&KDSWHU
3DJH
3RUWDOV• 6HUYLFH
0HQX,QWURGXFWLRQ
Press the Black Button to activate this ICON. The SWITCH TEST MENU now appears with the "TEST" Icon
(SWITCH TEST) flashing:
All switches can be tested one at a time. When possible, use a pinball to close any playfield switches; rolling the
ball at Stand-Up Targets or over/under switches is suggested. Use finger for all non-playfield switches. As each
switch is closed, the respective Switch Matrix Grid Position (1-64) will be lit.
To view the schematic for the switch selected, press either the Red or Green Button to select the "DRAW"
Mini-Icon. Press the Black Button to activate this Mini-Icon; do so while the switch is momentarily closed.
This will bring up the Switch Schematic Display. The display describes the switch in the Switch Matrix which
includes the name of the switch, the Return (Row) Wire and the Drive (Column) Wire, drive transistor, and the
"Pin-Outs" from the CPU/Sound Board. Activating the "DRAW" Icon when a switch is not closed, will give the
generic switch schematic as shown below.
To exit any display where there are no Mini-Icons (Schematics or Help Displays), press any button to return to
the previous Menu.
While in Switch Test or Active Switch Test, the Flipper & Start Buttons are deactivated (because they can be
part of these tests). Use the Red "LEFT," Green "RIGHT" and/or Black "ENTER" Buttons to select and
activate the "MINI-ICONS" at the bottom of the display. In Switch Test, if the "<<" or ">>" Mini-Icon is activated,
the display will go to (slip between) the previous tests (Active & Dedicated Switch Tests). Use either the Red or
Green Button to select the "PREV" Mini-Icon. Press the Black "ENTER" Button to return to Switch Test Menu.
To exit out of this Sub-Menu, select and activate the "PREV" Icon in the Menu. The DIAGNOSTICS MENU now
appears with the "SW" Icon (GO TO SWITCH MENU) flashing. Go through other Diagnostics selections or exit.
To exit the Portals Service Menu, select & activate the "QUIT" Icon (see the next page).
3RUWDOV• 6HUYLFH
0HQX,QWURGXFWLRQ
6HFWLRQ&KDSWHU
3DJH
6HF0HQX,QWUR
Press the Black "ENTER" Button to activate this icon. The Switch Test Display now appears.
48,77+,66(66,21([LWLQJWKH3R UWDOV 6HU YLFH0HQX
•
In the MAIN MENU and in all SUB-MENUS, if the "QUIT" Icon or "QUIT" Mini-Icon is selected and
activated, the Portals• Service Menu Session will be exited and returned to the Attract Mode.
D
Exiting Portals or turning game on/off will start the Power-Up Routine. Upon Power-Up, HOLD IN THE RIGHT
FLIPPER BUTTON to view the CPU Game & Display Code Versions (+ Check-Sums), followed by the Location
& Game ID Numbers and Alerts, if any (see Sec. 3, Chp. 2, GO TO DIAGNOSTICS MENU, Technician Alerts).
The below Problem / Solution Table was designed to answer some common problems frequently asked.
3UREOHP6ROXWLRQ7DEOH
PROBLEM
6HF0HQX,QWUR
Will not enter the Service Mode
after depressing the Black
"BEGIN TEST" Button.
All Service Buttons (Red, Green
and Black) appear nonfunctional.
The Green Service Button in
the Attract Mode will not enter
the SERVICE CREDITS MENU
to add Service Credits.
The Display "blanks out."
Icons "scroll" along continuously
in the MAIN MENU.
The Start and Flipper Buttons
do not select or activate Icons in
the SWITCH TEST MENU.
Can’t move selection of Icon with
the Left and/or Right Flipper
Buttons.
Some Icons appear
non-functional in the PRINTER
MENU(S).
Some Icons appear
non-functional in the GAME
SPECIFIC MENU under the
DIAGNOSTICS MENU.
The display returns to the
ATTRACT MODE exiting the
Service Session after a
FACTORY RESET.
In COIL TEST MENU, the coils
and flashlamps do not fire after
activating the "RUN" Icon.
In ADJUSTMENTS MENU, with
the Coin Door CLOSED,
adjustments are not getting
changed as desired (using the
Flipper & Start Buttons).
In Portals• Service Menu, the
volume cannot be adjusted with
the Red or Green Buttons.
In Portals• Service Menu, the
display seems to lock up, or the
Help Display appears to be
non-functional.
6HFWLRQ&KDSWHU
3DJH
SOLUTION
x Check the Service Switch(es) (Red, Green & Black Buttons) for loose connections or bad Ground.
x Check the associated wiring harness to/from the CPU/Sound Board, Connector CN6.
x Check CPU/Sound Board for possible failure.
x Check the Service Switches wiring harness for poor or no connection and/or broken wires.
x Check to make sure the Game is not in "Free Play." If the game is set to Free Play, adding Service
Credits is not required.
x Check the Service Switches wiring harness for poor or no connection and/or broken wires.
x Check the Dot Matrix Display for loose wiring harness for poor or no connection and/or broken wires.
x Check F1 (3/4A Fuse) on the Display Power Supply Board. Refer to Section 5, Chapter 4,
SCHEMATICS & TROUBLESHOOTING.
x Check for a stuck switch on the Green Button.
x If the Service Switch Set and/or the Coin Door was replaced, ensure the Locking Mechanism on the
Green Button was removed. If the Green Button "clicks" and locks into an up/down position, the
Green Button has this lock switch. Remove it. (Ref. to Svc. Bulletin #74.)
x This is normal. These switches are deactivated, as they are a part of the Switch Test. Use the Red
"LEFT" or Green "RIGHT" & Black "ENTER" Buttons in this Sub-Menu. Refer to Section 3,
Chapter 2, GO TO DIAGNOSTICS MENU, Switch Test.
x Check the Flipper Buttons for loose connections or bad Ground and refer to Section 5, Chapter 2,
Playfield Wiring, #-Flipper Circuit Wiring Diagram.
x This is normal only in Diagnostic’s Switch & Active Switch Tests (see previous Problem).
x If no printing equipment is connected, the "-" Icon, "+" Icon and "RUN" Icon will appear not to function.
Refer Section 3, Chapter 3, GO TO PRINTER MENU.
x If there is no other test under this Menu, the "<<" & ">>" Mini-Icons will appear not to function. The
remaining Icons should function as normal. Note: If there is no "Go To (Game Name) Test(s), the
"GAME NAME" Icon will not invoke another display.
x This is normal. After a FACTORY RESET, the Service Session is automatically exited. Refer to
Section 3, Chapter 6, GO TO RESET MENU, Factory Reset.
x Ensure the POWER INTERLOCK SWITCH is pulled out (see the start of this Chapter).
x This is normal. The Memory Protect Switch is enabled when the Coin Door is CLOSED. Changes
can be made with the Coin Door OPEN only.
x The Volume adjustment can only be made when in the Attract Mode. The Volume Mode is entered
by pressing the Red "VOLUME" Button. Then use the Red "LEFT" to decrease / decrement (-) or
Green "RIGHT" Button to increase / increment (+) the volume.
x If you cannot clear the situation by exiting back one Menu, exit completely out of the Portals•
Service Menu, and re-enter. If the problem persists, call Technical Support for additional help.
3RUWDOV• 6HUYLFH
0HQX,QWURGXFWLRQ
6HFWLRQ &K DS WHU RI *R7R'LDJQRVWLFV0HQX
2YHU YL HZ
The Portals• Service Menu System provides tests for sounds, display, lamps, switches and coils. Each feature
may be tested manually or automatically after entering the Portals• Service Menu (see Chapter 1 of this Section).
The automatic tests (e.g. Cycling Coils, Test Flash Lamps) may be used for a quick verification of automatic test
functions and the manual tests (Begin Play Test, Single Lamp / All / Row / Column Tests, and ’Game Name’
Tests) may be used for troubleshooting. All Icons and there usages are explained throughout this chapter in order.
Important: Upon Power-Up (Game Reset) or opening the Coin Door watch the Display for any Alerts.*
If this display flashes, the game is indicating that CMOS RAM memory
(CPU Loc. U212) has been corrupted. This is caused be either failure in
memory (e.g. batteries are dead and/or faulty RAM) or upon installation
of updated version of game code. Opening the Coin Door will initiate a
Factory Restore (Reset), by opening the Memory Protect Switch.
Check battery voltage at VBATT Test Point on the CPU/Sound Bd. (more details in Sec. 5, Chp. 4, PCBs).
This display is shown momentarily during Game Mode or Power-Up to
alert the operator of a coil malfunction (coil doesn’t energize or coil fires
a multiple number of times). OPERATOR ALERT! works by monitoring
any switch activated coil that has the potential to trap a ball when
disabled (more details in this Chapter, Technician Alerts, Pages 24-25).
* If this Tech Report Alert flashes (along with an audible sound), the
game has detected faulty switches and/or missing pinballs. Select the
"TECH" Icon for information (review Technician Alerts, Pages 24-25).
* For this Alert display to appear, Standard Adj. 49, must be changed
to POWERUP, COIN DOOR or POWERUP AND COIN DOOR, the
default is NEVER (review Section 3, Chp. 4, GO TO ADJUSTMENTS MENU, Standard Adjustments, Page 44).
CAUTION: Remove all pinballs from the Ball Trough prior to lifting the playfield to it’s full upright position for
servicing. PULL OUT the Power Interlock Switch for operation. To eject pinballs, select the "DIAG" Icon from the
MAIN MENU to go to the DIAGNOSTICS MENU, then select the "CLR" Icon to enter the CLEAR BALL TROUGH
MENU. Select the "RUN" Mini-Icon and press the Black "ENTER" Button or Start Button to remove one pinball
at a time (this feature also useful to retrieve a pinball for game testing in Begin Play Test & Game Specific Tests).
* 2 7 2' , $ * 1 26 7 , & 6 0 (1 8
After entering Portals• , the MAIN MENU now appears. To initiate, from the MAIN MENU, select the
"DIAG" Icon with either the Red "LEFT" or Green "RIGHT" Buttons (the Flipper Buttons operates in
the same manner) and press the Black "ENTER" Button (the Start Button operates in the same
manner). The DIAGNOSTICS MENU appears. Continue through this chapter for the explanation & usage of the
Icons in the DIAGNOSTICS MENU. Usage Note: Only in Switch & Active Switch Tests, the Flipper & Start
Buttons cannot be used as the alternate navigation buttons as they are a part of these tests. After exiting these
tests, the Left & Right Flipper and Start Buttons can once again be used. Continue through this chapter for the
explanation & usage of the Icons in the DIAGNOSTICS MENU.
*R7R
'LDJQRVWLFV0HQX
6HFWLRQ&KDSWHU
3DJH
6HF'LDJQRVWLFV
This flashing display is shown immediately upon opening the Coin
Door as a reminder that 20v/50v DC power to the playfield is disabled.
All electro-mechanical devices (such as Coils) cannot be tested with
the switch pushed in. PULL OUT the Power Interlock Switch ONLY if
you’re in a Testing Menu requiring power. See Access & Use in
Chapter 1 of this Section for the location of this switch. Closing the Coin Door will automatically reset this switch.
*R7R6ZLWFK0HQX
To initiate, from the DIAGNOSTICS MENU, select the "SW" Icon with either the Red "LEFT" or Green
"RIGHT" Buttons and press the Black "ENTER" Button. Switches are configured in an 8 x 8 Matrix of
Columns (Switch Drives) and Rows (Switch Returns) with up to 64 possible switches. The SWITCH
TEST MENU consists of three (3) parts: Switch Test, Active Switches & Dedicated Switch Test. Reminder:
The Flipper & Start Buttons (part of Switch Tests) cannot be used as navigation buttons during these test(s)
D
6ZLWFK7HVW
To initiate, from the SWITCH MENU, select the "TEST" Icon with either the Red or Green Buttons &
press the Black Button. In Switch Test, close each switch and observe the display. The display will
describe the switch in the Switch Matrix Grid (below), which includes the switch name, Return (Row)
Wire, Drive (Column) Wire and the "Pin-Outs" from the CPU/Sound Board. When the switch is closed, the
information if displayed momentarily. To view the schematic for the switch selected, press either the Red or Green
Button to select the "DRAW" Mini-Icon. Press the Black Button to activate this Mini-Icon; do so while the switch
is momentarily closed. To return to Switch Test, press the Black Button again.
$F WLYH6ZLWF K7HVW
To initiate, from the SWITCH MENU, select the "ACT" Icon with either the Red or Green Buttons & press
the Black Button. If still in a previous test, select the "PREV" Mini-Icon to return to SWITCH MENU or
select either of the "<<" or ">>" Mini-Icons to move through the tests. In Active Switch Test, if any
switches are stuck closed (or made from the presence of a pinball), the display sequences through the Switch
Names, Return (Row) Wire, Drive (Column) Wire, Drive Transistor, Part Number and the "Pin-Outs" from the
CPU/Sound Board. This cycle continues until all switches are cleared or until the test is exited.
'H GLFDWHG6ZLWF K7HV W
6HF'LDJQRVWLFV
To initiate, from the SWITCH MENU, select the "DED" Icon with either Flipper Button & press the Start
Button (the Service Switches are deactivated during this test.). In Dedicated Switch Test, the display
will describe the switch which includes the Switch Name, Return (Row) Wire, Drive (Column) Wire, Part
Number and the "Pin-Outs" from the CPU/Sound Board.
&ROXPQ
'ULYH
5RZ
5HWXUQ
1:
U400
6:,7&+0$75,;*5,''(',&$7('6:,7&+(6
1:
WHT-RED
CN7-P8
Sw. Part Number:
3:
U400
WHT-ORG
CN7-P7
Sw. Part Number:
4:
U400
WHT-YEL
CN7-P6
Sw. Part Number:
5:
U401
1
Cabinet Side
LT
BUTTON
(UK ONLY)
WHT-BLU
CN7-P3
Sw. Part Number:
7:
U401
WHT-VIO
CN7-P2
Sw. Part Number:
8:
U401
WHT-GRY
CN7-P1
Sw. Part Number:
9
Below P/F
SPOT
NOTE
STANDUP
180-5160-00
Coin Door
515-5162-08
10 Above P/F
4TH
COIN SLOT
SHOOTER
LANE
EXIT
180-5204-00
Coin Door
180-5190-28
11 Below P/F
6TH
COIN SLOT
4-BALL
TROUGH
#1 (LEFT)
2
3
4
Future Use
Coin Door
180-5119-02
12 Below P/F
RIGHT
COIN SLOT
4-BALL
TROUGH
#2
180-5204-00
Coin Door
180-5119-02
13 Below P/F
5
CENTER
WHT-GRN COIN
SLOT /
CN7-P5
DBA
Sw. Part Number:
6:
U401
Q2
2:
3:
Q3
4:
Q4
5:
Q5
6:
Q6
GRN-BRN GRN-RED GRN-ORG GRN-YEL GRN-BLK GRN-BLU
CN5-P1
CN5-P3
CN5-P4
CN5-P5
CN5-P6
CN5-P7
WHT-BRN
CN7-P9
Sw. Part Number:
2:
U400
Q1
4-BALL
TROUGH
#3
180-5204-00
Coin Door
180-5119-02
14 Below P/F
LEFT
COIN SLOT
4-BALL
TROUGH
VUK OPTO
180-5204-00
Coin Door
5TH
COIN SLOT
6
7
8
180-5160-00
Below P/F
( E )LVIS
EL( V )IS
ELV( I )S
ELVI( S )
Below P/F
49
Below P/F
57
Below P/F
LEFT
OUTLANE
180-5010-04
26 Above P/F
180-5189-00
34 Below P/F
500-6227-02
42 Below P/F
180-5015-05
50 Below P/F
500-6227-02
58 Below P/F
LEFT
ORBIT
HI
CENTER
SAUCER
EJECT
MIDDLE
TOP
LANE
RIGHT
BUMPER
LEFT
RETURN
LANE
500-6227-02
43 Below P/F
180-5015-05
51 Below P/F
500-6227-02
59 Below P/F
RIGHT
TOP
LANE
BOTTOM
BUMPER
LEFT
SLINGSHOT
180-5087-00
27 Above P/F
180-5186-00
35
INNER
LOOP
180-5087-00
28 Above P/F
RIGHT
RAMP
EXIT
NOT
USED
Below P/F
500-6227-02
44
180-5015-05
Mini P/F
52
( K )ING
NOT
USED
TOP
HOTEL
STANDUP
36
RIGHT
OUTLANE
515-7381-00
37 Below P/F
NOT
USED
K( I )NG
RIGHT
RAMP
MADE
BOTTOM
HOTEL
STANDUP
RIGHT
RETURN
LANE
Above P/F
45
Above P/F
515-5162-08
Mini P/F
53
180-5054-00 (x2)
60 Below P/F
180-5010-01
29
D
O
TS
500-6227-02
61 Below P/F
*5281'
,&
8
,13876
1:
GROUND
BLK
CN6-P1, -P11
U206 DS-1 on Cabinet Side
#1 LEFT
FLIPPER
BUTTON
GRY-BRN
CN6-P2
Sw. Part Number:
180-5160-00
2:
U206 DS-2 Below Playfield
GRY-RED
CN6-P3
#2 LEFT
FLIPPER E.O.S
(End-of-Stroke)
Sw. Part Number: 180-5149-00 on Flipper
3:
U206 DS-3 on Cabinet Side
GRY-ORG
CN6-P4
#3 RIGHT
FLIPPER
BUTTON
Sw. Part Number: 180-5164-00 Doubled
4:
U206 DS-4 Below Playfield
GRY-YEL
CN6-P6
#4 RIGHT
FLIPPER E.O.S.
(End-of-Stroke)
Sw. Part Number: 180-5149-00 on Flipper
5:
U206 DS-5 on Cabinet Side
GRY-GRN
CN6-P7
#5 UPPER RT.
FLIPPER
BUTTON
515-7381-00
38 Below P/F
180-5190-28
46 Above P/F
515-5162-08
54 In Cabinet
500-6227-02
62 Below P/F
( T )CB
KI( N )G
RIGHT
ORBIT
LOW
START
BUTTON
RIGHT
SLINGSHOT
See Sw. 14 Note
15 Below P/F
515-5162-08
23 Below P/F
180-5087-00
31 Above P/F
515-7381-00
39 Below P/F
180-5087-00
47 Above P/F
180-5174-00
55 In Cabinet
180-5054-00 (x2)
63 Above P/F
4-BALL
STACKING
OPTO
T( C )B
LEFT
RAMP
EXIT
KIN( G )
RIGHT
ORBIT
HI
TOURNAMENT
START
HOTEL
DOOR
515-5162-08
24 Below P/F
180-5010-01
32 Below P/F
515-7381-00
40 Below P/F
180-5087-00
48 Above P/F
180-5174-00
56 In Cabinet
180-5119-02
64 Above P/F
SHOOTER
LANE
TC( B )
TOP
SAUCER
EJECT
SCARF
STANDUP
HOTEL
POST
PLUMB
BOB
TILT
HOUND
DOG
GRY-BLK
CN6-P10
#8 BEGIN TEST
(BLACK BUTTON)
(In Test: ENTER)
180-5157-00
515-5162-08
180-5186-00
515-5967-02
180-5189-00
See Sw. 56 Note
180-5190-28
Sw. Part Number:
180-5192-00
6HFWLRQ&KDSWHU
3DJH
180-5158-00
22 Below P/F
41
LEFT
BUMPER
D
O
TS
180-5158-00
21 Below P/F
Below P/F
LEFT
TOP
LANE
D
O
TS
180-5158-00
20 Below P/F
33
Q8
ELVIS
HOME
D
O
TS
180-5158-00
19 Below P/F
Above P/F
8:
GRN-GRY
CN5-P9
SPINNER
D
O
TS
180-5158-00
18 Below P/F
E( L )VIS
25
Q7
LEFT
RAMP
MADE
Future Use
See Sw. 15 Note
Cabinet Side 16 Below P/F
RT
BUTTON
(UK ONLY)
17
7:
GRN-VIO
CN5-P8
30
Sw. Part Number: Same as DS-3 above.
6:
U206 DS-6 on Coin Door
GRY-BLU
CN6-P8
#6 VOLUME
(RED BUTTON)
(In Test: LEFT)
Sw. Part Number:
180-5192-02
7:
U206 DS-7 on Coin Door
GRY-VIO
CN6-P9
#7 SERV. CRED.
(GREEN BUTTON)
(In Test: RIGHT)
Sw. Part Number:
180-5192-04
8:
U206 DS-8 on Coin Door
*R7R
'LDJQRVWLFV0HQX
6:,7&+0$75,;*5,'/2&$7,216
9%DFNSDQHO
No Switches on
Back Panel.
IURQWYLHZ
7\SLFDO6ZLWFK:LULQJ6FKHPDWLF
'HGLFDWHG6ZLWFK6FKHPDWLF
= Switches above Playfield.
= Switches below Playfield.
'6
'6
'6
= Switches not on Playfield.
2SWLRQDO
7RXUQDPHQW
.LW 5HTXLUHG
'6
'6
Switch Part Notes: ¥ Yen Coin Switch is 180-5091-00. Part Numbers which start
with 515- or 500- include the bracket, target, and/or housing.
Sw. 14 & 15 Part Note: OPTO PC Boards are used as Switches:
Trans.: 515-0173-00 (Sw. 14 & 15); Receiver: 515-0174-00 (Sw. 14 &15);
Sw. 56 Part Note: The Switch is comprised of a Hanger Bracket (535-5319-00) and
Contact Wire (535-7563-01) located in the Cabinet.
Some Switch Diodes may be located under the playfield, in the Cabinet or
Backbox on Terminal Strips or Diode Boards and not on the assemblies.
DOTS: D iode O n T erminal S trip, see Section 5, Chapter 2, Playfield Wiring.
3OD\ILHOG5
*R7R
'LDJQRVWLFV0HQX
6HFWLRQ&KDSWHU
3DJH
6HF'LDJQRVWLFV
*R7R&RL O0HQX
D
To initiate, from the DIAGNOSTICS MENU, select the "COIL" Icon with either the Red "LEFT" or Green
"RIGHT" Buttons and press the Black "ENTER" Button. The coils are listed in groups. Coils 01-16 are
typically High Current Coils (although Low Current
Coils may be used in these positions & will be noted). Coils
3$57,$/&2,/6'(7$,/('&+$57
17-32 are typically Low Current Coils. Flash Lamps are
Drive Coil GA-Turn
+LJK &XUUHQW &RLOV *URXS Transistor or Bulb Type
typically used in positions 25-32 (although may be used in
any position & will be noted).
Q1 26-1200 !
#1 TROUGH UP-KICKER
AUTO LAUNCH
Q2
#3
ELVIS 5-BANK RESET
Q3
!
24-9400 !
090-5036-00B
#4
(OPT) SHAKER MOTOR
Q4
Motor Only
#5
MAGNET
Q5
22-6500
#6
CENTER EJECT
Q6
#7
HOTEL LOCK RELEASE
Q7
#8
CONTROL GATE
Q8
090-5044-00B
#2
38// 287 WKH 3RZHU ,QWHUORFN 6ZLWFK
IRU RSHUDWLRQ ZLWK WKH &RLQ 'RRU RSHQ
Important: The Partial Coils Detailed Chart Table is used as
a reference against the Coil & Flash Lamp Locations on the
next page. For the complete Coils Detailed Chart Table, see
the reverse of the following page. The Chart is shown to
compare against the Backbox I/O Power Driver Board
Detailed Wiring Diagram (shown again in Sec. 5, Chapter 1,
Playfield Wiring. For more on troubleshooting and
diagnosing, see Sec. 5, Chapter 4, Printed Circuit Boards.
6HF'LDJQRVWLFV
6LQJOH&RLO7H VW
To initiate, from the COIL MENU, select the "TEST"
Icon with either the Red or Green Buttons and
press the Black Button. Ensure the Power
Interlock Switch is pulled out. Select either the "-" or "+"
Mini-Icons. Start with the "+" Mini-Icon to start the manual
Single Coil Test from #1 (the test runs through all Coils and
Flash Lamps #1-#32 & Optional UK Only Auxiliary Positions
AUX 1-3). Press the Black Button on the "+" Mini-Icon, as
each coil is selected, the display will describe the Coil or
Flash Lamp Name with the corresponding number, the wire
with colors, the "Pin-Outs" from the I/O Power Driver Board,
the Coil Voltage and Gauge-Turns (e.g. 23-800). Press the
Black Button again to move forward in the test. To test and
view a particular Coil or Flash Lamp, select the "RUN"
Mini-Icon and press the Black Button. Each time the Black
Button is pushed, the Coil or Flash Lamp will fire on the
Playfield and/or Backbox, with the display indicating the Coil
or Flash Lamp information. Continue with the same
procedure to run through the entire test.
&\FOLQJ&RLO7HVW
To initiate, from the COIL MENU, select the "CYC"
Icon with either the Red or Green Buttons and
press the Black Button. If still in a previous test,
select the "PREV" Mini-Icon to return to COIL MENU or
select either of the "<<" or ">>" Mini-Icons to move to
Cycling Coil Test (selecting again will return to Coil Test).
The test pulses each regular Coil or Flash Lamp sequentially
(cycling) on the Playfield and in the Backbox (if Coils are
used). The display indicates CYCLING COILS.
!
!
Coil Note: Either -00B or -00T can be used for coil
replacements. B/T listed is preferable for easier diode
access & may differ on game.
6HFWLRQ&KDSWHU
3DJH
+LJK &XUUHQW &RLOV *URXS #9
23-8000
090-5001-00B
!
24-9400 !
090-5036-00B
23-8000 !
090-5001-00B
32-1800 !
090-5031-00B
041-5029-01
090-5042-00
Drive Coil GA-Turn
Transistor or Bulb Type
LEFT BUMPER
Q9
!
!
!
090-5044-00T
24-9400 !
090-5036-00B
23-9000 !
090-5020-30
23-9000 !
090-5020-30
22-9000 !
090-5020-20T
22-9000 !
090-5020-20T
26-1200
090-5044-00T
#11 BOTTOM BUMPER
Q10 26-1200
090-5044-00T
Q11 26-1200
#12 TOP EJECT
Q12
#13 UPPER LEFT FLIPPER
Q13
#14 UPPER RIGHT FLIPPER
Q14
#15 LEFT FLIPPER (50v RED/YEL)
Q15
#16 RIGHT FLIPPER (50v RED/YEL)
Q16
#10 RIGHT BUMPER
/RZ &XUUHQW &RLOV *URXS Drive Coil GA-Turn
Transistor or Bulb Type
#18 RIGHT SLINGSHOT
Q17 23-8000
090-5001-00T
Q18 23-8000
#19 HOTEL DOOR
Q19
!
!
090-5001-00T
27-1500 !
090-5004-00B
#20 FLASH: BACK PANEL X2
Q20
165-5000-89-HF
#21 FLASH: BACKPANEL TCB
Q21
165-5000-89-HF
#22 FLASH: SPINNER
Q22
#906 Bulb
#23 FLASH: UPR RT FLIPPER X2
Q23
#906 Bulb
#24 OPTIONAL COIL
Q24
Opt. 5v
#17 LEFT SLINGSHOT
#89 Bulb
#89 Bulb
165-5004-00
165-5004-00
D iode O n T erminal S trip (if noted)
/RZ &XUUHQW &RLOV *URXS Drive Coil GA-Turn
Transistor or Bulb Type
#25 STEPPER #1
Q25
#26 STEPPER #2
Q26
#27 STEPPER #3
Q27
#28 STEPPER #4
Q28
#29 ELVIS LEGS
#30 ELVIS ARMS
Q29 29-1400
090-5072-03
Q30 29-1400
#31 FLASH: ELVIS SPOT LIGHT
Q31
#906 Bulb
#32 FLASH: SLINGS X2
Q32
#906 Bulb
$X[LOLDU\ 8. 21/<
Stepper
Motor
Only
041-5069-00
!
!
090-5072-03
165-5004-00
165-5004-00
Drive
Transistor Coil GA-Turn
!
!
090-5030-00T
26-1200 !
090-5044-00T
Q1
26-1200
AUX 2: CENTER UP/DOWN POST
Q2
23-1100
AUX 3: RIGHT UP/DOWN POST
Q3
AUX 1: LEFT UP/DOWN POST
090-5044-00T
*R7R
'LDJQRVWLFV0HQX
&2,/)/$6+/$03/2&$7,216
<HOORZ
9%DFNSDQHO
&OHDU
<HOORZ
IURQWYLHZ
7\SLFDO&RLO:LULQJ
$QRGH 1RQ
%DQGHG 6LGH
1N4004
'ULYH
7UDQVLVWRU
&DWKRGH
%DQGHG 6LGH
3RZHU 6XSSO\
9ROWDJH
%XOE7\SHVXVHGIRU)ODVK/DPSV
$8; $8; = Coils / Flash Lamps above Playfield.
5HG
= Coils / Flash Lamps below Playfield.
$8; #906 Bulb
(Wedge Base)
165-5004-00
5HG
#89 Bulb
(Bayonet)
165-5000-89-HF
= Coils / Flash Lamps not on Playfield.
&RORU = Color of Mini-Mars of Flash Lamp Bulb.
Some Coil or Flash Lamp Diodes may be located under the playfield, in the Cabinet
or Backbox on Terminal Strips or Diode Boards and not on the assemblies.
DOTS: D iode O n T erminal S trip See Section 5, Chapter 2, Playfield Wiring.
Coil Q24 is Optional. If either a Coin Meter, Token Dispenser or Knocker (all optional
equipment) is required, call Technical Support for more information, 1-800-542-5377
or 1-708-345-7700.
3OD\ILHOG5
*R7R
'LDJQRVWLFV0HQX
6HFWLRQ&KDSWHU
3DJH
6HF'LDJQRVWLFV
5HG
,Q &2,/ 0(18
DOVR VHOHFW
&<&/,1*
&2,/
7(67
+LJK &XUUHQW &RLOV *URXS &2,/6'(7$,/('&+$577$%/(
Drive
Driver
Transistor Ouput Board
D
#1
TROUGH UP-KICKER
Q1
#2
AUTO LAUNCH
Q2
#3
ELVIS 5-BANK RESET
Q3
#4
(OPT) SHAKER MOTOR
Q4
#5
MAGNET
Q5
#6
CENTER EJECT
Q6
#7
HOTEL LOCK RELEASE
Q7
#8
CONTROL GATE
Q8
+LJK &XUUHQW &RLOV *URXS #9
LEFT BUMPER
I/O
Power
Driver
6
Drive
Driver
Transistor Ouput Board
Q9
#10 RIGHT BUMPER
Q10
#11 BOTTOM BUMPER
Q11
6HF'LDJQRVWLFV
#12 TOP EJECT
Q12
#13 UPPER LEFT FLIPPER
Q13
#14 UPPER RIGHT FLIPPER
Q14
#15 LEFT FLIPPER (50v RED/YEL)
Q15
#16 RIGHT FLIPPER (50v RED/YEL)
Q16
/RZ &XUUHQW &RLOV *URXS 5
5
I/O
Power
Driver
6
Drive
Driver
Transistor Ouput Board
#17 LEFT SLINGSHOT
Q17
#18 RIGHT SLINGSHOT
Q18
#19 HOTEL DOOR
Q19
#20 FLASH: BACK PANEL X2
Q20
#21 FLASH: BACKPANEL TCB
Q21
#22 FLASH: SPINNER
Q22
#23 FLASH: UPR RT FLIPPER X2
Q23
#24 OPTIONAL COIL
Q24
5
I/O
Power
Driver
6
Power Line
Color
Power Line
Connection
Power
Voltage
Drive Transistor
Control Line Color
D.T. Control
Line Connect
Coil GA-Turn
or Bulb Type
YEL-VIO
J10-P4/5 50v DC
BRN-BLK
J8-P1
YEL-VIO
J10-P4/5 50v DC
BRN-RED
J8-P3
YEL-VIO
BRN-ORG
J8-P4
BRN-YEL
J8-P5
Motor Only
VIO-YEL
J10-P4/5 50v DC
v AC
J17-P7 16
12v DC
J10-P3 50v DC
!
23-8000 !
090-5001-00B
24-9400 !
090-5036-00B
BRN-GRN
J8-P6
22-6500
YEL-VIO
J10-P4/5 50v DC
BRN-BLU
J8-P7
YEL-VIO
J10-P4/5 50v DC
BRN-VIO
J8-P8
YEL-VIO
J10-P4/5 50v DC
BRN-GRY
J8-P9
!
24-9400 !
090-5036-00B
23-8000 !
090-5001-00B
32-1800 !
090-5031-00B
Power Line
Color
Power Line
Connection
Drive Transistor
Control Line Color
D.T. Control
Line Connect
Coil GA-Turn
or Bulb Type
YEL-VIO
J10-P4/5 50v DC
BLU-BRN
J9-P1
26-1200
26-1200
RED-WHT
Power
Voltage
090-5044-00B
041-5029-01
090-5042-00
J10-P4/5 50v DC
BLU-YEL
J9-P5
J10-P1/2 50v DC
BLU-GRN
J9-P6
J10-P1/2 50v DC
BLU-BLK
J9-P7
J10-P1/2 50v DC
ORG-GRY
J9-P8
J10-P1/2 50v DC
ORG-VIO
J9-P9
!
!
090-5044-00T
26-1200 !
090-5044-00T
24-9400 !
090-5036-00B
23-9000 !
090-5020-30
23-9000 !
090-5020-30
22-9000 !
090-5020-20T
22-9000 !
090-5020-20T
Coil GA-Turn
or Bulb Type
YEL-VIO
J10-P4/5 50v DC
BLU-RED
J9-P2
YEL-VIO
J10-P4/5 50v DC
BLU-ORG
J9-P4
YEL-VIO
GRY-YEL~3A
Fuse~RED-YEL
BLU-YEL~3A
Fuse~RED-YEL
GRY-YEL~3A
Fuse~RED-YEL
BLU-YEL~3A
Fuse~RED-YEL
26-1200
090-5044-00T
Power Line
Color
Power Line
Connection
Power
Voltage
Drive Transistor
Control Line Color
D.T. Control
Line Connect
BROWN
J7-P1
20v DC
VIO-BRN
J7-P2
BROWN
J7-P1
20v DC
VIO-RED
J7-P3
BROWN
J7-P1
20v DC
VIO-ORG
J7-P4
ORANGE
J6-P10
20v DC
VIO-YEL
J7-P6
165-5000-89-HF
ORANGE
J6-P10
20v DC
VIO-GRN
J7-P7
165-5000-89-HF
ORANGE
J6-P10
20v DC
VIO-BLU
J7-P8
#906 Bulb
ORANGE
J6-P10
20v DC
VIO-BLK
J7-P9
#906 Bulb
RED
J16-P7
5v DC
VIO-GRY
J7-P10
Opt. 5v
Power Line
Color
Power Line
Connection
Power
Voltage
Drive Transistor
Control Line Color
D.T. Control
Line Connect
GRY-RED
J16-P3
12v DC
RED
J6-P1
GRY-RED
J16-P3
12v DC
GREEN
J6-P2
GRY-RED
J16-P3
12v DC
BLACK
GRY-RED
RED-WHT TO
BROWN
RED-WHT TO
BROWN
ORANGE
J16-P3
12v DC
!
23-8000 !
090-5001-00T
27-1500 !
090-5004-00B
23-8000
090-5001-00T
#89 Bulb
#89 Bulb
165-5004-00
165-5004-00
D iode O n T erminal S trip (if noted)
/RZ &XUUHQW &RLOV *URXS Drive
Driver
Transistor Ouput Board
#25 STEPPER #1
Q25
#26 STEPPER #2
Q26
#27 STEPPER #3
Q27
#28 STEPPER #4
Q28
#29 ELVIS LEGS
Q29
#30 ELVIS ARMS
Q30
#31 FLASH: ELVIS SPOT LIGHT
Q31
5
I/O
Power
Driver
6
J7-P1
J7-P1
J6-P10
J6-P3
BLUE
RED-WHT
TO
20v DC
BLK-GRN
TO
20v DC RED-WHT
BLK-BLU
BLK-VIO
20v DC
J6-P4
Coil GA-Turn
or Bulb Type
Stepper
Motor
Only
041-5069-00
J6-P6
!
29-1400!
090-5072-03
J6-P7
#906 Bulb
J6-P5
29-1400
090-5072-03
165-5004-00
#906 Bulb
ORANGE
J6-P10 20v DC
BLK-GRY
J6-P8
Q32
#32 FLASH: SLINGS X2
165-5004-00
1RWH ,Q 7HVW )ODVK /DPSV 0HQX )ODVK ,FRQ )ODVKHUV WHVWHG DUH DOO )ODVK /DPSV ORFDWHG EHWZHHQ 44 7KLV *DPH 44 44
$X[LOLDU\ 8. 21/<
AUX 1: LEFT UP/DOWN POST
!
Drive
Driver
Transistor Ouput Board
Power Line
Color
Power Line
Connection
Power
Voltage
Drive Transistor
Control Line Color
D.T. Control
Line Connect
Coil GA-Turn
26-1200
!
!
!
BROWN
J7-P1
WHITE
J2-P3
20v DC
UK 3X
090-5044-00T
Trans.
23-1100
BROWN
J7-P1
RED
J2-P4
20v DC
AUX 2: CENTER UP/DOWN POST Q2
090-5030-00T
Driver
26-1200
BROWN
J7-P1
ORANGE
J2-P7
Q3
20v DC
AUX 3: RIGHT UP/DOWN POST
Board
090-5044-00T
Coil Note: Either -00B or -00T can be used for coil replacements. B/T listed is preferable for easier diode access & may differ on game.
!
6HFWLRQ&KDSWHU
3DJH
Q1
*R7R
'LDJQRVWLFV0HQX
Backbox I/O Power Driver Board Detailed Wiring Diagram
FROM
GRY-RED
Power Out
STEPPER MOTOR
+12v DC
J16P3
I/O BD.
041-5069-00
5A
Slo-Blo
FROM
BLU-WHT
Q17
Transformer
F7
13v AC
J17P8
I/O BD.
BRIDGE 20
Q18
CONTROLLED
LAMPS
GND
FROM
J13P10
I/O BD.
BRDG 20
BLU-WHT
J7
13v AC
J17P9
I/O BD.
Q20
Q21
FROM
Transformer
Q19
LAMP COLUMNS
+18v DC
Q22
F22
Q24
Note: All Coils require diodes.
Some diodes may be located on
Terminal Strips & not on the coil itself.
D iode
On
T erminal
S trip
Q1-Q8
STP20N10L
110-0106-00
For the Playfield Terminal Strips,
Fuses & Misc. Wiring Descriptions &
Locations, see Section 5, Chapter 2,
Playfield Wiring.
J8
BRIDGE 1
50v HIGH
CURRENT
COILS
FROM
BLK-YEL
AC Voltages IN
GND
Q2
Q3
7A
Slo-Blo
F6
Q1
Q4
Q5
Q6
3A
Slo-Blo
Q7
BRDG 1
F21
3A
Slo-Blo
F20 FOR
FROM
BLK-ORG
AC Voltages IN
Q8
F20
MAGNET(S),
IF USED
J11P2
I/O BD.
48v AC
Q9-Q16
STP20N10L
110-0106-00
Q9
Q10
Q11
VOLTAGE OUTPUTS
J10
10
5 4
9 8 7
BLACK
GROUND
J9
3
2
1 J10
YEL-VIO
RED-YEL
HIGH POWER
HIGH POWER
50v DC
50v DC
YEL-BLK
VIO-YEL
HIGH POWER
HIGH POWER
24v AC
50v DC
Go To
Diagnostics Menu
Q12
Q13
Q14
Q15
Q16
#906
10
ORG 20v DC LOW POWER .
J7 1
BRN 20v DC LOW POWER .
2
3
4
6
7
8
9
VIO-BRN
23-800
VIO-RED
23-800
VIO-ORG
#89
27-1500
#89
#906
#906
VIO-BLK
#23 Flash:Upper
Right Flipper X2
Clear
Bulb
X2
Optional
10
J8 1
3
4
5
6
7
8
9
J9 1
2
4
5
6
7
8
9
(VIO-GRY)
BRN-BLK
OPTIONAL
26-1200
BRN-RED
23-800
BRN-ORG
24-940
#24
Optional Coil
#1 Trough
Up-Kicker
BRN-GRN
#5
Magnet
BRN-BLU
24-940
#6 Center
Eject
BRN-VIO
23-800
BRN-GRY
32-1800
BLU-BRN
26-1200
26-1200
26-1200
BLU-YEL
24-940
BLU-GRN
23-900
BLU-BLK
23-900
ORG-GRY
22-900
ORG-VIO
22-900
29-1400
OPTIONAL
+12V DC
SHAKER
MOTOR
041-5029-01
Located in Cabinet
FROM
RED
Power Out
+5v DC
J16P8
I/O BD.
5
3
J2
—
2
1
Resistor
W
#3 Elvis 5-Bank
(Drop Trgt.) Reset
#4 (OPT) Shaker
Motor (Optional)
BLU-ORG
order
Shaker Motor Kit
502-5027-00-84
#2 Auto
Launch
BRN-YEL
BLU-RED
RED
#19 Hotel
Door
#22 Flash:
Spinner
Clear
Bulb
X1
VIO-BLU
#18 Right
Slingshot
ELVIS
ARMS
RED-WHT
#21 Flash: Back
Panel TCB
Clear
Bulb
X1
VIO-GRN
#17 Left
Slingshot
RED-WHT
Diode
in Conn.
#20 Flash: Back
Panel X2
Clear
Bulb
X2
VIO-YEL
RED-WHT
#32 Flash:
Slingshots X2
Clear
Bulb
X2
BLK-GRY
BLU
#31 Flash: Elvis
Spot Lights X2
Clear
Bulb
X1
BLK-VIO
ELVIS
LEGS
S
Q23
48v AC
8
BLU
8A
Slo-Blo
J11P3
I/O BD.
7
#906
29-1400
6
RED-WHT
Diode
in Conn.
Sec. 3: ... Diagnostics
16v AC
J17P7
I/O BD.
BLK-BLU
#30 Elvis
Arms
520-5065-00
X
Located in Cabinet
OPTIONAL
BRDG 2
Transformer
#29 Elvis
Legs
Lug
Under
Playfield
N.C.
D2
F1
N/S
F2
D3
F3
FUSE
2.5A
250v
FROM
RED-WHT
#7 Hotel
Lock Release
6
7
4
5
1
2
Transformer
J1
+16v AC
+12v DC
J17P7
I/O BD.
#8 Control
Gate
#9 Left
Bumper
#10 Right
Bumper
#11 Bottom
Bumper
#12 Top
Eject
#13 Upper
Left Flipper
BLACK
Diode
in Conn.
J10P3
I/O BD.
MAGNET
BLACK
22-650
Q32
Q17-Q24
TIP122
110-0067-00
BLK-GRN
Rear
BLU
5
WHT
GRN
SHAKER MOTOR BOARD
GND
FROM
Q31
RED-WHT
BLUE
#28 Stepper
(Motor) #4
WHT
+
4
FROM
BRIDGE 2
20v LOW
CURRENT
COILS
#27 Stepper
(Motor) #3
Shaft Side
DIODE
1N5404
Q29
3
BLK
BROWN
Q28
WHT-RED
16v AC
J17P6
I/O BD.
BLACK
Q26
Q30
Transformer
#26 Stepper
(Motor) #2
RED
J6
GREEN
BLK
2
Q27
For the General Illumination (G.I.)
Circuit Detailed Wiring Diagram,
see Sec. 5, Chp. 2, Playfield Wiring.
RED
Q25
GRN
Q25-Q32
TIP122
110-0067-00
Haydon
Nº 46868-12-002
ORANGE
J6 1
Partial View
I/O Power
Driver Board
520-5137-01
#25 Stepper
(Motor) #1
FROM
VIO-YEL
High Power
50v DC
GRY-YEL
#14 Upper
Right Flipper
BLU-YEL
#15 (Lower)
Left Flipper
GRY-YEL
#16 (Lower)
Right Flipper
BLU-YEL
3A
Slo-Blo
J10P4/5
I/O BD.
FROM
YEL-VIO
3A
Slo-Blo
High Power
50v DC
3A
Slo-Blo
J10P1/2
I/O BD.
3A
Slo-Blo
RED-YEL
FROM
High Power
50v DC
These Coil Fuses are located
under playfield NEAR assembly,
see Sec. 5, Chp. 2, Playfield Wiring.
Section 3, Chapter 2
Page 21
*R7R/D PS0HQX
To initiate, from the DIAGNOSTICS MENU, select the "LAMP" Icon with either the Red "LEFT" or Green
"RIGHT" Buttons and press the Black "ENTER" Button. Controlled lamps are configured in and 8 x 10
Matrix of Columns (Lamp Drives) and Rows (Lamp Returns) with up to 80 lamps possible. The Lamp
Test Menu consists of four (4) parts: Single Lamp Test, Test All Lamps, Row Lamp Test & Column Lamp Test.
D
6LQJOH/DPS7HVW
To initiate, from the LAMP MENU, select the "ONE" Icon with either the Red or Green Buttons and
press the Black Button. Select either the "-" or "+" Mini-Icons. Start with the "+" Mini-Icon to start the
manual Single Lamp Test from Column 1, Row 1, Lamp 1. Press the Black Button on the "+" Mini-Icon,
as each lamp is selected, the lamp will light at it’s location on the playfield as well as the display, indicating the
Lamp Matrix Grid Position (below), lamp name with the corresponding number, Return (Row) Wire & Color, Drive
(Column) Wire & Color, and associated drive transistors. Press the Black Button again to move forward in the
test. To test and view a particular lamp, select the "RUN" Mini-Icon and press the Black Button. Each time the
Black Button is pushed, the lamp will light-up on the playfield, with the display indicating the lamp information.
Continue with the same procedure to run through the entire test.
7HVW$OO/DPSV
To initiate, from the LAMP MENU, select the "ALL" Icon with either the Red or Green Buttons and press
the Black Button. If still in Single Lamp Test (or any 1 of the 4 tests), select the "PREV" Mini-Icon to
return to LAMP MENU or select either of the "<<" or ">>" Mini-Icons to move through the tests, keep
activating until Test All Lamps is displayed. The display will indicate ALL LAMPS ON and the lamps on the
playfield will be lit, alternating between the rows in the Lamp Matrix Grid.
5 RZ&ROX PQ/DPS7HVWV
6HF'LDJQRVWLFV
To initiate, from the LAMP MENU, select the "ROW" or "COL" Icon with either the Red or Green Buttons
and press the Black Button. If still in a previous test, select the "PREV" Mini-Icon to return to LAMP
MENU or select either of the "<<" or ">>" Mini-Icons to move through the tests, keep activating until Row
or Column Lamp Test (whichever desired) is displayed. In this test, each set of lamps in each Row or
Column of the Lamp Matrix Grid (respective to each test) will light-up on the playfield and is indicated in the
display.
&ROXPQ
Y
5RZ
*URXQG
1:
Q33
/$030$75,;*5,'
1:
YEL-BRN
J13-P9
Q34
Q35
Q36
HOUND
DOG
5:
Q37
6:
Q38
Q39
RED-VIO
J12-P8
8:
Q40
Q41
Q42
RED
J12-P11
BLUE
SUEDE SHOES
9
5
33
4:
U14
YEL-BLK
J13-P6
5:
U13
YEL-GRN
J13-P5
LEFT
RETURN LANE
RIGHT
RETURN LANE
6:
U12
YEL-BLU
J13-P4
RIGHT
OUTLANE
HEARTBREAK
HOTEL
JAILHOUSE
ROCK
ALL
SHOOK UP
8
7
7:
U11
YEL-VIO
J13-P3
SPOT
NOTE
SCARF
HITS
COMPLETED
LEFT RAMP
ARROW
6
4
3
2
1
8:
U10
YEL-GRY
J13-P1
( T )CB
ELVIS
COLLECTED
TOP 10
COMPLETED
SHOOK
LEFT
RAMP NOTE
RIGHT RAMP
ARROW
UP
RIGHT
RAMP NOTE
#44 Clear Bulb 34 #44 Clear Bulb 35 #44 Clear Bulb 36 #44 Clear Bulb 37 #44 Clear Bulb 38 #44 Clear Bulb 39 #555 Clear Bulb 40 #555 Clear Bulb
( E )LVIS E( L )VIS EL( V )IS ELV( I )S ELVI ( S )
41 #555 Clear Bulb 42 #555 Clear Bulb 43 #555 Clear Bulb 44 #555 Clear Bulb 45
LEFT ORBIT
ARROW
L. ORBIT BLUE
SUEDE SHOES
LEFT
ORBIT NOTE
ALL
RIGHT ORBIT
ARROW
GIFT
FROM ELVIS
RIGHT
ORBIT NOTE
#44 Clear Bulb 46 #44 Clear Bulb 47 #44 Clear Bulb 48 #44 Clear Bulb
( K )ING
K( I )NG
KI( N )G
KIN( G )
49 #555 Clear Bulb 50 #555 Clear Bulb 51 #555 Clear Bulb 52 #555 Clear Bulb 53 #555 Clear Bulb 54 #555 Clear Bulb 55 #555 Clear Bulb 56 #555 Clear Bulb
HOUND
DOG
CENTER LOOP
ARROW
C. LOOP BLUE
SUEDE SHOES
57 #555 Clear Bulb 58 #555 Clear Bulb 59 #555 Clear Bulb 60
LEFT
TOP LANE
MIDDLE
TOP LANE
RIGHT
TOP LANE
CENTER
LOOP NOTE
LOCK
VIDEO
MODE
73
GOLD
RECORD
KING OF
ROCK N ROLL
JACKPOT
SUPER
JACKPOT
#44 Clear Bulb 61 #44 Clear Bulb 62 #44 Clear Bulb 63 #555 Clear Bulb 64 #555 Clear Bulb
HEART
BREAK
LITE
EXTRA BALL
ENCORE
LETTER
T( C )B
HOTEL
65 #44 Yellow Bulb 66 #44 Yellow Bulb 67 #44 Yellow Bulb 68 #44 Yellow Bulb 69 #44 Yellow Bulb 70
RED-WHT
J12-P10
10:
YEL-ORG
J13-P7
25 #555 Clear Bulb 26 #555 Clear Bulb 27 #555 Clear Bulb 28 #555 Clear Bulb 29 #555 Clear Bulb 30 #555 Clear Bulb 31 #555 Clear Bulb 32 #555 Clear Bulb
RED-GRY
J12-P9
9:
LEFT
OUTLANE
10
RED-BLU
J12-P6
7:
U15
17 #555 Clear Bulb 18 #555 Clear Bulb 19 #555 Clear Bulb 20 #555 Clear Bulb 21 #555 Clear Bulb 22 #555 Clear Bulb 23 #555 Clear Bulb 24 #555 Clear Bulb
RED-YEL
J12-P4
RED-GRN
J12-P5
3:
#555 Clear Bulb 10 #555 Clear Bulb 11 #555 Clear Bulb 12 #555 Clear Bulb 13 #555 Clear Bulb 14 #555 Clear Bulb 15 #555 Clear Bulb 16 #555 Clear Bulb
9
RED-ORG
J12-P3
4:
U16
YEL-RED
J13-P8
ROCK
AGAIN
RED-BLK
J12-P2
3:
2:
#555 Clear Bulb 2 #555 Clear Bulb 3 #555 Clear Bulb 4 #555 Clear Bulb 5 #555 Clear Bulb 6 #555 Clear Bulb 7 #555 Clear Bulb 8 #555 Clear Bulb
1
RED-BRN
J12-P1
2:
U17
#44 Blue Bulb
GRACELAND
71
#44 Red Bulb
SPECIAL
TC( B )
72 #44 Orange Blb.
EXTRA
BALL
#44 Clear Bulb 74 #44 Clear Bulb 75 #44 Clear Bulb 76 #44 Clear Bulb 77 #44 Clear Bulb 78 #44 Clear Bulb 79 #555 Clear Bulb 80 #555 Clear Bulb
( E )NCORE E( N )CORE EN( C )ORE ENC( O )RE ENCO( R )E ENCOR( E )
6HFWLRQ&KDSWHU
3DJH
TOURNAMENT
BUTTON
START
BUTTON
*R7R
'LDJQRVWLFV0HQX
/$030$75,;*5,'/2&$7,216
9%DFNSDQHO
IURQWYLHZ
Lamps 60-62 & 73-78 are located
on the rear of the Back Panel.
5('
<(/
-XXX
-XXX
Diode
1N4001
%XOE7\SHVXVHGIRU/DPSV
Amber or
Orange
9 (Wedge)
#555 Bulb
Blue
Clear
165-5002-00
7\SLFDO/DPS:LULQJ6FKHPDWLF
Red
#44 Multicolor Bulbs
(Bayonet)
5
Yellow
165-5000-44-HF: (Clear), 165-5053-XX: (-02 Red,
-07 Amber / Orange, -05 Blue, -06 Yellow)
= Lamps above Playfield.
= Lamps below Playfield.
= Lamps not on Playfield.
2SWLRQDO
7RXUQDPHQW
.LW 5HTXLUHG
Lamp Part Notes: #555 Bulb Clear = 165-5002-00.
#44 Bulb (Hvy. Fil.) Clear = 165-5000-44-HF. #44 Bulb Red = 165-5053-02.
#44 Bulb Blue = 165-5053-05. #44 Bulb Yellow = 165-5053-06.
#44 Bulb Orange = 165-5053-07 (can sub. with Amber -03).
See Section 4, Chapter 1, Parts Identification & Location, Pages 72-74 for more
details on bulbs and corresponding sockets.
Some Lamp Diodes may be located under the playfield, in the Cabinet or
Backbox on Terminal Strips and not on or with the Lamp Socket.
DOTS: D iode O n T erminal S trip, see Sec. 5, Chapter 2, Playfield Wiring.
3OD\ILHOG5
*R7R
'LDJQRVWLFV0HQX
6HFWLRQ&KDSWHU
3DJH
6HF'LDJQRVWLFV
7HVW)OD VK/DPSV
D
To initiate, from the DIAGNOSTICS MENU, select the "FLASH"
Icon with either the Red "LEFT" or Green "RIGHT" Buttons
and press the Black "ENTER" Button. After selecting this Icon
the display will indicate CYCLING FLASHERS. The Flash Lamps will
38// 287 WKH 3RZHU ,QWHUORFN 6ZLWFK
cycle continuously until the test is exited. This test allows the technician IRU RSHUDWLRQ ZLWK WKH &RLQ 'RRU RSHQ
to easily spot any burned-out bulbs and replace them. Flashers tested
are Flash Lamps in Positions: Q1-Q32 and in this game Flash Lamp(s) are : Q20-Q23 & Q31-Q32.
&OHD U%D OO 7URX JK
To initiate, from the DIAGNOSTICS MENU, select the "CLR"
Icon with either the Red "LEFT" or Green "RIGHT" Buttons
and press the Black "ENTER" Button. This Menu is provided
to allow the technician a simple method of removing the balls from the
38// 287 WKH 3RZHU ,QWHUORFN 6ZLWFK
trough and also, to test functionality of the trough, ensuring proper trough IRU RSHUDWLRQ ZLWK WKH &RLQ 'RRU RSHQ
operation. After selecting this Icon the display will show a graphic of the
ball trough with balls in the trough with it’s corresponding switch number. Select the "RUN" Mini-Icon to eject the
ball in the first position. Simultaneously, the display and the playfield will eject the ball to the Trough Up-Kicker,
eject from the Trough Up-Kicker into the Shooter Lane and will be ejected onto the playfield where the technician
can easily retrieve the pinball or allow the ball(s) to re-enter the trough to continue Clear Ball Trough Test.
CAUTION: Continuous use of above test may overheat the Trough Up-Kicker Coil.
7HFK QL FL DQ$O HUW V
To initiate, from the DIAGNOSTICS MENU, select the "TECH" Icon with either the Red "LEFT" or Green
"RIGHT" Buttons and press the Black "ENTER" Button. This Menu is provided to show any switch
problems and/or missing pinballs.
6HF'LDJQRVWLFV
After selecting this Icon, and if any of the below criteria is met, the display will indicate any or all of the following
categories: POSSIBLY BROKEN SWITCH, CHECK SWITCHES and/or HYPERSENSITIVE SWITCH (Sw. #16,
Shooter Lane, is used as an example). If more than one switch is reported, the Switch Number and Name will
cycle within the category, and then will cycle the categories. To return to the DIAGNOSTICS MENU, select the
"PREV" Mini-Icon and press the Black "ENTER" Button.
6ZLWFK'HWHFWLRQ
During game play, activation of switches are monitored. In programming, every switch is given a minimum &
maximum value based on the game. The switches are monitored every 5 minutes of game play with a "sliding
window" of 15 minutes. If a switch is determined to be faulty, game play is compensated.
x Switches noted as POSSIBLY BROKEN SWITCH should be checked,
then adjusted or replaced. Important: A switch reported as "possibly
broken" may actually be an unused switch due to lack of usage and
not because they’re broken. This can happen, if a switch is located
in a "hard" shot position, and the players are not making the shot.
Game programming will still compensate for this unplayed switch.
x Switches noted as CHECK SWITCHES are determined to be stuck
closed or open depending on switch usage. Free up the switch
actuator adjust or replace if necessary.
x Switches noted as HYPERSENSTIVE SWITCH means just that, the
switch should be readjusted or replace if necessary.
Determination of switch usage can be checked in Audits (review Section 3, Chapter 3, GO TO AUDITS MENU).
Find the associated Audit with the switch in question and check usage; compare it to commonly used switches for
comparison. After any switch is checked and repaired or replaced, it’s suggested to test the switch in the PLAY
TEST MENU (see the next page) or Single Coil Test (reviewed earlier in this chapter, Page 18) where the associated coil to the switch can be tested as well. After correcting the problem, the switch will still be reported until the
game is played and the switch is again monitored as specified above. Only you can determine if a switch getting
reported is bad or if the switch is currently not getting actuated during game play.
Technicians Alerts continued on the next page.
6HFWLRQ&KDSWHU
3DJH
*R7R
'LDJQRVWLFV0HQX
7H FK QLFLDQ$OH UWV&RQWLQX HG
3LQEDOO'HWHFWLRQ
While in Technician Alerts Menu, if the following is displayed, the game
has detected one (1) or more pinball(s) missing and has compensated
for the lost pinball(s) to provide normal game play.
Important: Determine where the pinball is! Do not add pinball(s) until it is determined the pinball(s) are indeed
missing & not just stuck. If pinball(s) are added, & if the original stuck pinball has freed itself, the pinball game will
not operate properly with the extra pinball(s). When the pinball is recovered, the above display will not appear the
next time Technician Alerts is visited (a game must be played for the pinball to be determined as found).
During game play, a ball can get trapped or stuck. If after approximately 15 seconds of inactivity or "no scoring,"
Ball Search is started. Note: If the pinball is in the Plunger Lane or "held" on the flipper, no Ball Search will be
performed. The game will perform one Ball Search in an attempt to "find" or free-up the pinball.
If the game does not see a switch closure (indicating the pinball has not
been found), this display will appear with a count-down timer of 20
seconds, during which Ball Search will continue until the timer runs out
(this feature will not happen if the game is in Competition Mode; Ball
Search will continue until the pinball is found, unstuck and/or replaced
manually). The display will momentarily acknowledge the missing pinball(s). The game will provide another
pinball into play and will compensate for the lost pinball. Game play will appear normal.
7HFK5HSRUW$OHUW2SWLRQ
This game has the capability of automatically alerting the operator upon Power-Up and/or opening the Coin
Door if any switch problems and/or missing pinballs has occurred. Review Section 3, Chapter 4, GO TO
ADJUSTMENTS MENU, Standard Adjustments. The Standard Adjustment to change is 49. The default for this
feature is NEVER. The options are: POWERUP, COIN DOOR or POWERUP AND COIN DOOR.
Upon Power-Up (Game Reset) and/or opening the Coin Door
(depending on the option selected), this display will flash three (3) times
along with an audible sound. To find out the problem, enter this
Technicians Alert Menu and wait for the displays.
Note: Coils are not reported in Technician Alerts, h o w e v e r, if a faulty switch is the culprit, the switch will
then be reported. The below display is shown momentarily during Game Mode or Power-Up to alert the operator
of a coil malfunction (coil doesn’t energize or coil fires a multiple number
of times). " OPERATOR ALERT! " works by monitoring any switch
activated coil that has the potential to trap a ball when disabled (e.g. in
the Auto Launch, Scoop, Eject, etc.). This alert can also appear if a
switch associated with a coil (example shown is #2 Auto Launch) is stuck
closed (caused by a switch jam or stuck ball); the CPU/Sound Board will activate the coil approximately ten times
and if the switch remains closed, the game will report this switch in Technician Alerts as CHECK SWITCHES.
The display alert " PLEASE CHECK TECH REPORT " will be shown (o n l y i f POWERUP, COIN DOOR or
POWERUP AND COIN DOOR is selected in Standard Adjustment 49).
6HU YLFH3KRQH
To initiate, from the DIAGNOSTICS MENU, select the "SERV" Icon with either the Red "LEFT" or Green
"RIGHT" Buttons and press the Black "ENTER" Button. After selecting this Icon the display will
indicate a phone number to call if technical assistance is required (In USA Code: 1-800-KICKERS).
%HJLQ3OD\7HVW
To initiate, from the DIAGNOSTICS MENU, select the "PLAY"
Icon with either the Red "LEFT" or Green "RIGHT" Buttons
and press the Black "ENTER" Button. After selecting this Icon
the technician can test certain play functions to insure all switch activated 38// 287 WKH 3RZHU ,QWHUORFN 6ZLWFK
coils function without entering game play. For example, by rolling the ball IRU RSHUDWLRQ ZLWK WKH &RLQ 'RRU RSHQ
over the Shooter Lane switch, the Autoplunger should fire. If it kicks to
early or too late, the switch actuator should be adjusted to compensate for this error. If it fails to fire, use the
Switch Test or Coil Test to help determine the cause of the failure. During this Play Test, check all coil assemblies
with related switches in the game. For unique Game Test(s), select the "ELVIS" Icon in the DIAGNOSTICS
MENU, reviewed on Pages 27-28.
*R7R
'LDJQRVWLFV0HQX
6HFWLRQ&KDSWHU
3DJH
6HF'LDJQRVWLFV
Note: This detection and compensation will happen with every pinball, if each suffers the same fate of a ball trap.
If all balls get trapped, the game cannot be played or started until the situation is rectified.
)LUH.QRFNHU
To initiate, from the DIAGNOSTICS MENU, select the "KNOCKER" Icon with either the Red "LEFT" or
Green "RIGHT" Buttons and press the Black "ENTER" Button. The digitally mastered "Knocker" is
sounded.
6RXQG6SHDNHU7HVW
D
To initiate, from the DIAGNOSTICS MENU, select the "SPKR" Icon with either the Red "LEFT" or Green
"RIGHT" Buttons and press the Black "ENTER" Button. The BSMT 2000 Sound System produces
true digital stereo sound from Backbox & Cabinet Speakers or "Mono" on the Cabinet Speaker (when
used by itself). After selecting this Icon, select the "-" or "+" Mini-Icons and press the Black "ENTER" Button to
activate the first test. Repeat to visually see & hear all tests. Select the "RUN" Mini-Icon to activate the test
chosen without moving to the next test.
Note: During Sound Tests, the display shows the speaker identification and the corresponding sound(s). The
sound functions allow verification that both channels are functioning properly & that the speaker connections are
correct.
6SHDNHU3KDVH7HVWLQJ
Connections to each of speakers are polarized and each must be connected appropriately for the best quality
sound. If one speaker has the positive and negative connections reversed with respect to the other one, bass
frequencies will not be produced properly and the overall sound quality will be poor. To test for proper speaker
phasing, use the sound test to cycle through the Backbox & Cabinet, and Backbox Sine (repeated) functions. If
the Cabinet Sine produces more volume and bass than the Left Sine, the speakers are connected properly. If it
produces the same or less, one speaker is connected improperly. To isolate and correct reversed speaker
connections, one of two methods may be used.
6HF'LDJQRVWLFV
1. Check each speaker for polarity markings. If the speakers have polarity markings, verify that the Backbox
Speaker RED-WHT Wire and the Cabinet Speaker YEL-WHT Wire is connected to the negative (-) terminal.
2. Disconnect the speaker output connector from the CPU / Sound Board and connect a 1.5-volt battery across
each speaker pair one at a time while observing the speakers. Make sure the positive battery terminal is
connected to the positive lead (CN4, Pin-3 (RED-BLK) or Pin-6 (YEL-BLK)) each time. As the connection is
made, check speaker cone movement; proper connections are indicated by outward movement.
$XWR 0DQXDO 7HVWV
Note: For ROM Usage (Summary
Table) & Locations, see Page #
Speaker Test
: in the "Find-It-In-Front: Dr.
Sound/OPSYS EPROM (Loc. U7)
Pinball Section". Voice ROMs
Voice
ROMs: 1 (U17) 2 (U21) 3 (U36) 4 (U37)
(U17, U21, U36 and/or U37) which
are 8MB must have a Jumper at
W6 on the CPU/Sound Board to function properly.
6RXQGV 3URGXFHG
Tone
Level 1-3+ (Music Test)
Speech Pattern 1-3+
%HJLQ%X UQ,Q
To initiate, from the DIAGNOSTICS MENU, select the "BURN" Icon with either the Red "LEFT" or Green
"RIGHT" Buttons and press the Black "ENTER" Button. After selecting this Icon the Begin Burn-In
Test will start. At this stage the game will exercise all CPU I/O Functions (Dot Matrix Display Test, Coil
Testing, Lamp Testing, Sound..., etc.). This is provided to constantly exercise sounds, coils, etc... Cumulative
Burn-In minutes will be displayed. Note: To reset Burn-In minutes to 00 see Section 3, Chapter 6, GO TO RESET
MENU, Factory Reset. Caution: Performing a Factory Reset will reset all other information as well.
' R W 0 DW UL [7H V W
To initiate, from the DIAGNOSTICS MENU, select the "DOT TEST" Icon with either the Red "LEFT" or
Green "RIGHT" Buttons and press the Black "ENTER" Button. After selecting this Icon the Dot Matrix
Test immediately begins. Note: Pressing any button will exit the test & return to DIAGNOSTICS MENU.
The display will immediately illuminate & cycle for 1 pass of each test continuously for each of the following:
7HVW
7HVW
Illuminates 1 vertical column of dots, turning it off
& illuminating the next column, until each column has
been individually lit, while the other columns are off.
Illuminates 1 horizontal row of dots, turning it off
& illuminating the next row, until each row has been
individually lit, while the other rows are off.
6HFWLRQ&KDSWHU
3DJH
*R7R
'LDJQRVWLFV0HQX
'RW0DWUL[7HV W&RQWLQX HG
7HVW
7HVW
Illuminates all the dots,
except for one column from left to right.
Illuminates all the dots,
except for one row from top to bottom.
7HVW
Illuminates every other dot lit,
in both the rows and columns.
Note: Pressing the Red, Green, Black or Flipper Buttons will exit the test & return to DIAGNOSTICS MENU.
'RW0DWUL['LVSOD\([SODLQHG
The board is controlled by a 6809E Microprocessor and its personality ROM (Unique to the Game). It receives
Data, Reset & Clock Information from the CPU/Sound Board via the ribbon cable and sends back multiple Status
and Busy Signals to the CPU. This is to insure synchronized communication between the CPU and the Display
Controller Board. The Drivers for the rows and columns are provided on 5 surface mounted integrated circuits on
the Dot Matrix Display Driver Board.
(/9 ,67HVW6WHSSHU0RWRU7HVW
To initiate, from the DIAGNOSTICS MENU, select the "ELVIS"
Icon with either the Red "LEFT" or Green "RIGHT" Buttons
and press the Black "ENTER" Button.
38// 287 WKH 3RZHU ,QWHUORFN 6ZLWFK
IRU RSHUDWLRQ ZLWK WKH &RLQ 'RRU RSHQ
This will bring up the STEPPER MOTOR TEST MENU. Upon entering the test, the display will indicate the status
of the Switch (the "RUN" Mini-Icon will be flashing). If the BOX is solid, Switch 33 is "Closed" (Elvis should be in
the Home Position or closest to the Upper Playfield).
This Sub-Menu is used to test the operation of the Stepper Motor (Q25-Q28), Elvis Legs (Q29), Elvis Arms
(Q30) and the Elvis Home Switch (Switch 33). After finishing the Test, select the "PREV" Mini-Icon to return to
the previous Menu.
Select the "ARMS" Mini-Icon to energize the Arms Coil (Q30); select the "LEGS" Mini-Icon to energize the Legs
Coil (Q29); select the "PULSE" Mini-Icon to pulse the Stepper Motor; select the "RUN" Mini-Icon to continuously
run the Stepper Motor 1 full cycle (back-to-front or front-to-back). Note: Upon Power-Up (quiting or exiting the
Portals• Service Menu initiates the "Power-Up Mode") the mechanism will return to it’s HOME Position.
ELVIS Test Menu continued on the next page.
*R7R
'LDJQRVWLFV0HQX
6HFWLRQ&KDSWHU
3DJH
6HF'LDJQRVWLFV
The display utilizes a Micro-Processor Control Board mounted in piggyback fashion to the Dot Matrix Display
(128 X 32) Driver Board. The purpose behind this board is to provide more information to the operator as well as
displaying graphics to the player.
(/9,67HV W&RQWLQX HG
D
6HF'LDJQRVWLFV
WKLVSDJHLVEODQN
6HFWLRQ&KDSWHU
3DJH
*R7R
'LDJQRVWLFV0HQX
*R7R)XVH7DEOH
To initiate, from the DIAGNOSTICS MENU, select the "FUSES" Icon with either the Red "LEFT" or
Green "RIGHT" Buttons and press the Black "ENTER" Button. The FUSE TABLE MENU now
appears. This provides the technician with the current Fuse Table for this game (also noted on a decal in
the Backbox).The fuses are located in the Backbox (on the Display Power Supply Board and the I/O Power
Driver Board), and also in the Cabinet (under the playfield by the Flippers and/or by any unique assembly
requiring an additional fuse, such as magnets). For the complete Fuse List in the Quick Reference Fuse Chart &
Pictorials, see the next page or Page # (front of this manual).
:
([ DPSOH
Press the Black "ENTER" Button to activate this ICON. The DIAGNOSTICS MENU now appears with the
"SW" Icon (GO TO SWITCH MENU) flashing; use the Red "LEFT" or Green "RIGHT" Buttons, until the
"FUSES" Icon (GO TO FUSE TABLE) is flashing:
Press the Black Button to activate this ICON. The FUSE TABLE now appears.
Select and activate the "+" Mini-Icon to view the next fuse in the group. Continue to select either the "+" or "-"
Mini-Icons to view each fuse one at a time. The display will describe the fuse identification number (e.g. Main, F1,
F6, F7, etc.), rating of fuse (e.g. 5A 250v S.B. - i.e. 5 Amp, 250 volt, Slo-Blo), location of fuse (i.e. Backbox: Board
Name located on; or Cabinet: Under the playfield or in Service Outlet), and ‘use of fuse’ (e.g. 90v DC High Voltage
Power, etc.). The current fuse listed will remain in the display until the next fuse is chosen or when the Sub-Menu
is exited by selecting & activating the "PREV" or "QUIT" Mini-Icons.
Go To Fuse Table continued on the next page.
*R7R
'LDJQRVWLFV0HQX
6HFWLRQ&KDSWHU
3DJH
6HF'LDJQRVWLFV
After entering Portals , the MAIN MENU now appears with the "DIAG" Icon (GO TO DIAGNOSTICS MENU)
flashing:
%DFNER[3&%)XVHV520V%ULGJHV5HOD\V3)&DELQHW)XVHV&DE6ZLWFKHV
Inside Coin Door
D
QUICK REFERENCE FUSE CHART
B a c k b o x F u s e s
LOC:
DISPLAY POWER SUPPLY (P.S.) BOARD
A250v S.B. 90v DC High Voltage Display
F1
LOC:
I / O POWER DRIVER BOARD
F6 7A 250v S.B. 50v DC Primary High Power Coils/Flippers
F7 5A 250v S.B. 20v DC Low Power Coils
F8 5A 250v S.B. 12v DC Logic Power
F9 5A 250v S.B. 12v DC Logic Power
F20 4A 250v S.B. 50v DC Magnets
F21 3A 250v S.B. 50v DC Coils
F22 8A 250v S.B. 18v DC Controlled Lamps
F23 4A 250v S.B. 5v DC Logic
F24 5A 250v S.B. 6.3v AC G.I. Lamps (BRN-WHT WHT-BRN)
F25 5A 250v S.B. 6.3v AC G.I. Lamps (YEL WHT-YEL)
F26 5A 250v S.B. 6.3v AC G.I. Lamps (GRN WHT-GRN)
F27 5A 250v S.B. 6.3v AC G.I. Lamps (VIO WHT-VIO)
F28 3A 250v S.B. 24v AC Not Used / Spare
C a b i n e t F u s e s
LOC:
SERVICE (AC) OUTLET BOX (Cabine t Bottom)
n/a 8A 250v S.B. 115v AC Main Fuse Line (Domestic or USA)
n/a 5A 250v S.B. 220v AC Main Fuse Line (International)
P l a y f i e l d ( P / F ) F u s e s
LOC:
UNDER PLAYFIELD ( nea r Flippers )
n/a 3A 250v S.B. 50v DC Right Flipper (BLU-YEL RED-YEL)
n/a 3A 250v S.B. 50v DC Left Flipper (GRY-YEL RED-YEL)
n/a 3A 250v S.B. 50v DC Upr. Rt. Flipper (BLU-YEL RED-YEL)
n/a 3A 250v S.B. 50v DC Upr. Lt. Flipper (GRY-YEL RED-YEL)
For locations & more information on fuses, see Sec. 5, Chapter 2.
Memory Protect
Switch (Bottom)
6HF'LDJQRVWLFV
Playfield Power
Interlock Switch
Volume Control & Service Switches
For operational usage, see Sec. 3, Chapter 1,
Portals Service Menu Introduction.
Service Outlet
(on Power Box)
On/Off Switch
(Under Cabinet)
Transformer on
Cabinet Bottom
Int’l.: 5 Amp 250v USA: 8 Amp 250v
Slo-Blo Fuse
Slo-Blo Fuse
Inside Coin Door
520 7<3( RQ %' /2&$7,21 _ 6,=(
CPU Sound
CPU Game
CPU Voice ROM 1
CPU Voice ROM 2
CPU Voice ROM 3
CPU Voice ROM 4
DISPLAY Controller
U7
U210
U17
U21
U36
U37
U5
3$57 180%(5
512K
1 MB
8 MB
8 MB
8 MB
8 MB
4 MB
965-0415-84
965-0416-84
965-0417-84
965-0418-84
965-0419-84
965-0420-84
965-0421-84
SW300
1R)XVHV
3x AA
9'LVSOD\3RZHU6XSSO\%G
F1
CPU U210 U212
GAME
CMOS
EPROM
RAM
SOUND &
VOICE ROMS
6ROHQRLG
([SDQGHU
%RDUG ‡
7RXUQDPHQW
,QWHUIDFH
%RDUG ‡
U7 U37 U36 U21 U17
)RU 6FKHPDWLFV DQGRU
&RPSRQHQW 3DUWV RQ 3&
%RDUGV VKRZQ RQ WKLV SDJH
UHYLHZ 6HFWLRQ &KDSWHU 3ULQWHG &LUFXLW %RDUGV
7KH <HOORZ 3DJHV
‡ UK or Tournament
GAMES ONLY
For more info., see Section 5,
Chp. 4, PCBs (Yellow Pages)
F24 F26
,23RZHU'ULYHU%RDUG6
F9 F22 F23
F25F27
G.I.
Relay
Relay
F8 F7
B3
B2
B20 BRIDGES
BRIDGES
U5
B21
Dot Matrix Display
Bd. (Reverse Side)
1R)XVHV
DISPLAY EPROM U5 / ROM 0 U5
6HFWLRQ&KDSWHU
3DJH
*** All BRIDGES rated
35A @ 100v ***
B1
'LVSOD\&RQWUROOHU%G:
7KH 'LVSOD\ &RQWUROOHU KDV WKH 'LVSOD\
(3520 /RFDWLRQ 8 520 7KLV ERDUG LV ORFDWHG EHKLQG WKH
; 'RW 0DWUL[ 'LVSOD\ %RDUG
&386RXQG%G,,Z$70(/5
B2
+50v DC High
Current Coils
+20v DC Low
Current Coils
B20
+/-12v DC
Sound /
Display / Logic
+18v DC
Illumination
B21
+5v DC Logic
Voltage
B3
F6 F21
B1
F28 F20
*R7R
'LDJQRVWLFV0HQX
'U3LQE DOO
To initiate, from the DIAGNOSTICS MENU, select the Cross "DR." Icon with either the Red "LEFT" or
Green "RIGHT" Buttons and press the Black "ENTER" Button. This will bring you (the operator /
technician) into DR. PINBALL (Flow Chart Menus) which offers you a choice of three (3) Icons:
Coil "DR.", Switch "DR." and Lamp "DR." Icons. Selecting a particular Icon will give you a choice of which specific
Coil (any and all coil assemblies such as Flippers, VUKs, Magnets, etc.), Switch or Lamp circuit needs to be
diagnosed. Dr. Pinball will now display a question or give a procedure to follow such as "Does the lamp turn
on?" or "Check bridge rectifier BR-20, if short replace." When Dr. Pinball displays a question or requests a
procedure, Dr. Pinball will expect a response such as "NO" or "YES" (see below examples of the Mini-Icons which
will prompt the operator). You the operator/technician must respond by using the Red or Green Buttons to
"SELECT" a Mini-Icon and the Black Button to "ACTIVATE or ENTER" your selection.
&RLO)ORZ&KDUW
To initiate, from the DR. PINBALL MENU, select the Coil "DR." Icon with either the Red or Green
Buttons and press the Black Button. This is the Coil Flow Chart. Follow the questions, answering by
using the Mini-Icons in the display.
6ZLWFK)ORZ&K DUW
To initiate, from the DR. PINBALL MENU, select the Switch "DR." Icon with either the Red or Green
Buttons and press the Black Button. This is the Switch Flow Chart. Follow the questions, answering
by using the Mini-Icons in the display.
To initiate, from the DR. PINBALL MENU, select the Lamp "DR." Icon with either the Red or Green
Buttons and press the Black Button. This is the Lamp Flow Chart. Follow the questions, answering by
using the Mini-Icons in the display.
The following are the Mini-Icons with explanations for the DR. PINBALL Sub-Menus:
Select and activate either the "-" or "+" Mini-Icons to diagnose a Coil, Lamp or Switch. Select and activate the
"RUN" Mini-Icon to test selected item. The "PREV" Mini-Icon allows you to go back to previous question. Select
the "QUIT" Mini-Icon to exit Portals completely. Select the "?" Mini-Icon (Help) to see directions on button usage.
Select and activate either the "NO or "YES" Mini-Icons to answer a question given. Select and activate the "END"
Mini-Icon to change to a new item to test. The "PREV" Mini-Icon allows you to go back to previous question.
Select the "QUIT" Mini-Icon to exit Portals completely. Select the "?" Mini-Icon (Help) to see directions on button
usage.
After a diagnosis is given, select and activate the "END" Mini-Icon to change to a new item to test. The "PREV"
Mini-Icon allows you to go back to previous display. Select the "QUIT" Mini-Icon to exit Portals completely.
Select the "?" Mini-Icon (Help) to see directions on button usage.
In COIL FLOW CHART MENU, select and activate the "PULSE" Mini-Icon to pulse the coil selected. Select and
activate the "END" Mini-Icon to change to a new item to test. The "PREV" Mini-Icon allows you to go back to
previous question. Select the "QUIT" Mini-Icon to exit Portals completely. Select the "?" Mini-Icon (Help) to see
directions on button usage.
*R7R
'LDJQRVWLFV0HQX
6HFWLRQ&KDSWHU
3DJH
6HF'LDJQRVWLFV
/DPS)ORZ&K DUW
CLICK RED BOX ON THE NEXT PAGE TO RESET THIS PAGE. BE CAREFUL!
&RS\ WKLV SDJH IRU )LHOG $XGLW 7UDFNLQJ 3HUIRUPDQFH
STARTING METER Reading :
STARTING METER Date (MM/DD/YR) :
AUDITOR’S NAME :
CURRENT METER Reading :
AUDIT Date (MM/DD/YR) :
CPU Version :
CURRENT VOLUME SETTING:
...... ......
......... ..
DISPLAY Version :
...... ......
........
GAME LOCATION NAME :
($51,1*667$1'$5'$8',77$%/(6
($51,1*6$8',76
$XGLW GHILQLWLRQV IROORZ LQ WKLV &KDSWHU
01
02
03
04
05
TOTAL
PAID CREDITS
FREE GAME
PERCENTAGE
AVERAGE
BALL TIME
AVERAGE
GAME TIME
COINS THRU
LEFT SLOT
06
07
08
09
10
COINS THRU
RIGHT SLOT
COINS THRU
CENTER SLOT
COINS THRU
4TH SLOT
COINS THRU
5TH SLOT
COINS THRU
6TH SLOT
11
12
13
14
TOTAL
COINS
TOTAL
EARNINGS
METER
CLICKS
SOFTWARE
METER
67$1'$5'$8',76
$XGLW GHILQLWLRQV IROORZ LQ WKLV &KDSWHU
To track Feature & Tournament Audits, see Pages 36 or 54.
6HF*R7R$XGLWV
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
TOTAL
BALLS PLAYED
TOTAL
EXTRA BALLS
EXTRA BALL
PERCENT
REPLAY 1
AWARDS
REPLAY 2+
AWARDS
TOTAL
REPLAYS
REPLAY
PERCENT
TOTAL
SPECIALS
SPECIAL
PERCENT
TOTAL
MATCHES
HIGH SCORE
AWARDS
HIGH SCORE
PERCENT
TOTAL
FREE PLAYS
TOTAL
PLAYS
0–1.9M
SCORES
2M–3.9M
SCORES
4M–5.9M
SCORES
6M–7.9M
SCORES
8M–9.9M
SCORES
10M–12.4M
SCORES
12.5M–14.9M
SCORES
15M–17.4M
SCORES
17.5M–19.9M
SCORES
20M–22.4M
SCORES
6HFWLRQ&KDSWHU
3DJH
39
22.5M–24.9M
SCORES
25M–34.9M
SCORES
35M–49.9M
SCORES
50M–74.9M
SCORES
75M–99.9M
SCORES
100M–149.9M
SCORES
150M+
SCORES
AVERAGE
SCORES
SERVICE
CREDITS
BALL SEARCH
STARTED
LOST BALL
FEEDS
LOST BALL
GAME STARTS
LEFT
DRAINS
CENTER
DRAINS
RIGHT
DRAINS
40
TILTS
64
41
TOTAL
BALLS SAVED
65
42
PROPRIETARY
66
43
PROPRIETARY
67
44
PROPRIETARY
25
26
27
28
29
30
31
32
33
34
35
36
37
38
45
PROPRIETARY
46
PROPRIETARY
47
PROPRIETARY
48
PROPRIETARY
49
PROPRIETARY
50
52
BASE
REPLAY
LEFT FLIPPER
USED
RIGHT FLIPPER
USED
53
PROPRIETARY
54
PROPRIETARY
51
55
56
57
58
59
60
61
62
63
68
0–1 MINUTE
GAMES
1 – 1.5 MINUTE
GAMES
1.5 – 2 MINUTE
GAMES
2 – 2.5 MINUTE
GAMES
2.5 – 3 MINUTE
GAMES
3 – 3.5 MINUTE
GAMES
3.5 – 4 MINUTE
GAMES
4 – 5 MINUTE
GAMES
5 – 6 MINUTE
GAMES
6 – 8 MINUTE
GAMES
8 – 10 MINUTE
GAMES
10 – 15 MINUTE
GAMES
15+ MINUTE
GAMES
RECENT
REPLAY PERCENT
Note: Audits are subject to change (with or without notice).
*R7R
$XGLWV0HQX
6HFWLRQ &K DS WHU RI *R 7R $XGLWV 0HQX
2YHU YL HZ
The Portals• Service Menu System provides 198 Audits for accounting purposes and for evaluation of Game
Programming. The Audits are divided into 3 groups: Earnings Audits (Audits 01-14), Standard Audits
(Audits 01-68) and Feature Audits (Programming Use Only) (Audits 01-116). For details on Tournament
Audits, see Section 3, Chapter 7, GO TO TOURNAMENT MENU. Audits which are named Proprietary are also
for Future Expansion or Programming. Game code may get upgraded during production; compare all Audits in
the display with the manual and make any corrections to the Audit Table (previous page), as necessary. Audits are
subject to change (with or without notice). To view Audits in the display, enter the Portals• Service Menu System.
For how to RESET Audits, see Section 3, Chapter 6, GO TO RESET MENU.
*272$8', 760(18
After entering Portals• , the MAIN MENU now appears. Select the "AUD" Icon in the MAIN MENU with
either the Red "LEFT" or Green "RIGHT" Buttons (the Flipper Buttons operates in the same manner)
and press the Black "ENTER" Button (the Start Button operates in the same manner). The AUDITS
MENU appears. Continue through this chapter for the explanation & usage of the Icons in the AUDITS MENU.
(D UQLQJV$X GLW V
To initiate, from the AUDITS MENU, select the "EARN" Icon with either the Red "LEFT" or Green
"RIGHT" Buttons and press the Black "ENTER" Button. Select and activate either of the ">>"
Mini-Icons to view the next or previous Audit in this group. The display will describe the Audit Number,
Audit Name and the Current Audit Total (Value). The current Audit will remain in the display until the next Audit
is viewed or when this Menu is exited.
1U
($51,1*6 $8',7 1$0( 'HILQLWLRQ
01 TOTAL PAID CREDITS: Provides the total number of Paid Credits.
FREE GAME PERCENTAGE: Provides the percentage total by dividing Standard Audit 13, TOTAL FREE
02
PLAYS, by Standard Audit 14, TOTAL PLAYS.
AVERAGE BALL TIME: In seconds, the average ball time is derived from the total play time divided by
03
Standard Audit 01, TOTAL BALLS PLAYED.
04 AVERAGE GAME TIME: The average game time is expressed in minutes and seconds (0:00).
05 COINS THRU LEFT SLOT: Provides the total number of times Coin Mechanism Switch 06 was closed.
06 COINS THRU RIGHT SLOT: Provides the total number of times Coin Mechanism Switch 04 was closed.
07 COINS THRU CENTER SLOT: Provides the total number of times Coin Mechanism Switch 05 was closed.
08 COINS THRU 4TH SLOT: Provides the total number of times Coin Mechanism Switch 02 was closed.
09 COINS THRU 5TH SLOT: Provides the total number of times Coin Mechanism Switch 07 was closed.
10 COINS THRU 6TH SLOT: Provides the total number of times Coin Mechanism Switch 03 was closed.
11 TOTAL COINS: Provides the total amount of coins registered through all the Coin Slots.
TOTAL EARNINGS: The total cash value accumulated since the last Factory Reset occurred.
12
See Section 3, Chapter 6, GO TO RESET MENU, Reset Coin Audits.
METER CLICKS: Provides the total number of money clicks accumulated. Based on the country’s lowest
13
coin denomination used for the game credit.
SOFTWARE
METER: Provides the continuing total of Meter Clicks. This audit cannot be reset; the display
14
shows the constant addition of Meter Clicks.
*R7R
$XGLWV0HQX
6HFWLRQ&KDSWHU
3DJH
6HF*R7R$XGLWV
back to
Page 32
6W DQGDU G$X GLW V
To initiate, from the AUDITS MENU, select the "S.P.I." Icon with either the Red "LEFT" or Green
"RIGHT" Buttons and press the Black "ENTER" Button. Select and activate either of the ">>"
Mini-Icons to view the next or previous Audit in this group. The display will describe the Audit Number,
Audit Name and the Current Audit Total (Value). The current Audit will remain in the display until the next Audit
is viewed or when this Menu is exited.
1U
67$1'$5' $8',7 1$0( 'HILQLWLRQ
6HF*R7R$XGLWV
01 TOTAL BALLS PLAYED: Provides the total number of Regular and Extra Balls.
02 TOTAL EXTRA BALLS: Provides the total number of Extra Balls awarded.
03 EXTRA BALLS PERCENT: Provides the percentage total by dividing Standard Audit 02, TOTAL EXTRA
BALLS, by Standard Audit 14, TOTAL PLAYS.
04 REPLAY 1 AWARDS: Provides the total Awards (Credits, Extra Balls or Scores) for Level 1.
05 REPLAY 2+ AWARDS: Provides the total Awards (Credits, Extra Balls or Scores) for Level 2 or higher.
06 TOTAL REPLAYS: Provides the total Awards (Credits, Extra Balls or Scores) for exceeding Replay Score
Levels.
REPLAY PERCENT: Provides the percentage total from dividing Standard Audit 06, TOTAL REPLAYS, by
07
Standard Audit 14, TOTAL PLAYS. The percentage reflects replay total awards for exceeding replay
score levels.
08 TOTAL SPECIALS: Provides the total Awards (Credits, Extra Balls, or Scores) for making Specials.
09 SPECIAL PERCENT: Provides the percentage total by dividing Standard Audit 08, TOTAL SPECIALS, by
Standard Audit 14, TOTAL PLAYS.
TOTAL MATCHES: Provides the total Credits awarded for matching the last two digits of the score with the
System-Generated Match Number at the end of the game. Percentage of Match Credits is adjustable
10
from 0% to 10% by Standard Adjustment 13, MATCH PERCENTAGE, if enabled.
See Section 3, Chapter 4, GO TO ADJUSTMENTS MENU, Standard Adjustments.
11 HIGH SCORE AWARDS: Provides the total Awards (Credits, Extra Balls, or Scores) for exceeding the
High-Score-To-Date scores.
HIGH SCORE PERCENT: Provides the percentage total by dividing Standard Audit 11, HIGH SCORE
12
AWARDS, by Standard Audit 14, TOTAL PLAYS.
TOTAL FREE PLAYS: Provides the total Free Credits for Replays, High-Score-To-Date, Specials and
13
Match.
TOTAL PLAYS: This total is derived by adding the sum of Earnings Audit 01, TOTAL PAID CREDITS, and
14
Standard Audit 13, TOTAL FREE PLAYS.
Note: Free Credits are not recorded in the Audit until they are actually used.
0–1.9M SCORES: Provides the total number of games the Player’s final score was
15
0 and 1,999,990 points.
16 2M–3.9M SCORES: ... and the Player’s final score was between 2,000,000 and 3,999,990 points.
17 4M–5.9M SCORES: ... and the Player’s final score was between 4,000,000 and 5,999,990 points.
18 6M–7.9M SCORES: ... and the Player’s final score was between 6,000,000 and 7,999,990 points.
19 0 8M–9.9M SCORES: ... and the Player’s final score was between 8,000,000 and 9,999,990 points.
20 10M–12.4M SCORES: ... and the Player’s final score was between 10,000,000 and 12,499,990 points.
21 12.5M–14.9M SCORES: ... and the Player’s final score was between 12,500,000 and 14,499,990 points.
22 15M–17.4M SCORES: ... and the Player’s final score was between 15,000,000 and 17,499,990 points.
23 17.5M–19.9M SCORES: ... and the Player’s final score was between 17,500,000 and 19,999,990 points.
24 20M–22.4M SCORES: ... and the Player’s final score was between 20,000,000 and 22,499,990 points.
25 22.5M–24.9M SCORES: ... and the Player’s final score was between 22,500,000 and 24,999,990 points.
26 25M–34.9M SCORES: ... and the Player’s final score was between 25,000,000 and 34,999,990 points.
27 35M–49.9M SCORES: ... and the Player’s final score was between 35,000,000 and 49,999,990 points.
28 50M–74.9M SCORES: ... and the Player’s final score was between 50,000,000 and 74,999,990 points.
29 75M–99.9M SCORES: ... and the Player’s final score was between 75,000,000 and 99,999,990 points.
30 100M–149.9M SCORES: ... and the Player’s final score was between 100,000,000 and 149,999,990 points.
150M+ SCORES: Provides the total number of games the Player’s final score was
31
150,000,000 points and over.
AVERAGE SCORES: This total is derived from adding the Final Score of each game to a table and dividing
32
this sum by Standard Audit 14, TOTAL PLAYS.
Standard Audits 33-68 continued on the next page.
6HFWLRQ&KDSWHU
3DJH
*R7R
$XGLWV0HQX
33
34
35
36
37
38
39
40
41
>>
50
51
52
>>
55
56
57
58
59
60
61
62
63
64
65
66
67
68
SERVICE CREDITS: Provides the total number of times the Portals• Green Button (Dedicated Switch 7)
was pushed in Attract Mode.
See Section 3, Chapter 1, Service Switch Set Access & Use, for how to receive Service Credits.
See Sec. 3, Chp. 6, GO TO RESET MENU, Reset Credits, for how to delete Service (and Paid Credits).
BALL SEARCH STARTED: Provides the total number of times the game performed a Ball Search.
LOST BALL FEEDS: Provides the total number of times the game added a pinball to play when it could not
find a pinball after Ball Search.
See Section 3, Chapter 2, GO TO DIAGNOSTICS MENU, Technicians Alert [Pinball Detection].
LOST BALL GAME STARTS: Provides the total number of times the game started with a pinball missing
from the ball trough at the start of a game.
See Section 3, Chapter 2, GO TO DIAGNOSTICS MENU, Technicians Alert [Pinball Detection].
LEFT DRAINS: Provides the total number of times Rollover Switch 57 was closed.
CENTER DRAINS: Provides the total number of times the pinball had drained when the last switch
closed was not Switch 57 or Switch 60.
RIGHT DRAINS: Provides the total number of times Rollover Switch 60 was closed.
TILTS: Provides the total number of times Contact Switch 56 was closed.
TOTAL BALLS SAVED: Provides the total number of times this feature was used (this feature can be
turned ON or OFF, see Standard Adj. 38, FREEZE TIME in Section 3, Chapter 4, GO TO ADJUSTMENTS
MENU, Standard Adjustments). This feature is enabled at the start of each pinball and is disabled as
soon as a predetermined number of switches are "closed" or the allocated time has expired.
42 - 49 PROPRIETARY: Proprietary Audits are used for Future Expansion or Programming.
BASE REPLAY: Provides the current base Replay Level Score.
LEFT FLIPPER USED: Provides the total number of times the Left Flipper Button (Dedicated Switch 1)
was pushed in Game Mode.
RIGHT FLIPPER USED: Provides the total number of times the Right Flipper Button (Dedicated Switch 3)
was pushed in Game Mode.
53 - 54 PROPRIETARY: Proprietary Audits are used for Future Expansion or Programming.
0 - 1 MINUTE GAMES: Provides the total number of games the total game time was between
0:00 and 1:00 minute.
1 – 1.5 MINUTE GAMES: Provides the total number of games the total game time was between
1:00 and 1:30 minutes.
1.5 – 2 MINUTE GAMES: Provides the total number of games the total game time was between
1:30 and 2:00 minutes.
2 – 2.5 MINUTE GAMES: Provides the total number of games the total game time was between
2:00 and 2:30 minutes.
2.5 – 3 MINUTE GAMES: Provides the total number of games the total game time was between
2:30 and 3:00 minutes.
3 – 3.5 MINUTE GAMES: Provides the total number of games the total game time was between
3:00 and 3:30 minutes.
3.5 – 4 MINUTE GAMES: Provides the total number of games the total game time was between
3:30 and 4:00 minutes.
4 – 5 MINUTE GAMES: Provides the total number of games the total game time was between
4:00 and 5:00 minutes.
5 – 6 MINUTE GAMES: Provides the total number of games the total game time was between
5:00 and 6:00 minutes.
6 – 8 MINUTE GAMES: Provides the total number of games the total game time was between
6:00 and 8:00 minutes.
8 – 10 MINUTE GAMES: Provides the total number of games the total game time was between
8:00 and 10:00 minutes.
10 – 15 MINUTE GAMES: Provides the total number of games the total game time was between
10:00 and 15:00 minutes.
15+ MINUTE GAMES: Provides the total number of games the total game time was
15:00 and over.
RECENT REPLAY PERCENT: Percent figured with programming thresholds for a determined number of
games (again based on programming thresholds). The percentage reflects replay total awards for
exceeding replay score levels.
*R7R
$XGLWV0HQX
6HFWLRQ&KDSWHU
3DJH
6HF*R7R$XGLWV
6WDQGDUG$X GLWV&RQWLQXHG
67$1'$5' $8',7 1$0( 'HILQLWLRQ
&RS\ WKLV SDJH IRU )LHOG $XGLW 7UDFNLQJ 3HUIRUPDQFH
)HD WX UH$ XGL WV To initiate, from the AUDITS MENU, select the "ELVIS" Icon with either the Red "LEFT" or Green
"RIGHT" Buttons and press the Black "ENTER" Button. Select and activate either of the ">>" MiniIcons to view the next or previous Audit in this group. The display will describe the Audit Number, Audit
Name and the Current Audit Total (Value). The current Audit will remain in the display until the next Audit is
viewed or when this Menu is exited. Audits Definition: Programming Use Only. The proprietary information
provides the total number of times a feature was started, awarded, lit, played and/or completed (awarded); also,
the total number of Switch Closures during certain modes or features are tracked (a predetermined single/multiple
variations of switch closures are used to determine the lighting and/or completion of the feature stated).
)($785($8',77$%/(
)($785($8',76
352*5$00,1* 86( 21/< UNLABELED BOXES ARE FOR FUTURE EXPANSION.
6HF*R7R$XGLWV
01
SPINNER SPINS
40
MYSTERY ENCORE LETTER
79
GIFT LIT
02
LEFT ORBIT
41
MYSTERY XBALL LIT
80
GIFT AWARDED
03
LEFT RAMP
42
MYSTERY 1 MIL
81
GIFT VIDEO
04
CENTER LOOP
43
MYSTERY 10 MIL
82
GIFT RECORDS
05
RIGHT RAMP
44
MYSTERY BONUS X
83
GIFT KORR
06
RIGHT ORBIT
45
MYSTERY SPECIAL LIT
84
GIFT LITE XB
07
TOP LANES
46
MYSTERY TCB
85
GIFT ENCORE LETTER
08
TOP LANES COMPLETED
47
MYSTERY NOTE
86
FANS LEVEL 1
09
TOP LANES MAXED
48
MYSTERY 100K
87
FANS LEVEL 2
10
POP HITS
49
MYSTERY LTB
88
FANS LEVEL 3
11
SPOT NOTE TARGET
50
MYSTERY HOUND DOG
89
FANS LEVEL 4
12
HOUND DOG TARGET
51
MYSTERY HOTEL
90
FANS LEVEL 5
13
TOP EJECT
52
MYSTERY SHOES
91
LTB COLLECTED
14
CENTER EJECT
53
MYSTERY JAIL
92
TCB STARTED
15
CENTER EJECT BEHIND
54
MYSTERY SCREAMING FANS
93
TCB RESTARTED
16
HOTEL ARRIVALS
55
MYSTERY ALL SHOOK UP
94
TCB 2+ STARTS
17
HOTEL DOOR
56
HOUND DOG STARTED
95
SCARF MORE TIME
18
HOTEL TARGET
57
2+ HOUND DOG STARTED
96
SCARF ADD-A-BALL
19
DROP TARGET HITS
58
HOUND DOG RECORDS
97
SCARF NOTE
20
DROP BANKS COMPLETED
59
HOTEL STARTED
98
SCARF XB LIT
21
TCB TARGETS
60
2+ HOTEL STARTED
99
SCARF GIFT LIT
22
KING TARGETS
61
HOTEL RECORDS
100 SCARF LIT
23
KING COMPLETED
62
JAIL STARTED
101 SCARF AWARD
24
SCARF TARGET
63
2+ JAIL STARTED
102 KORR STARTED
25
LEFT OUTLANE
64
JAIL RECORDS
103 KORR AWARD
26
LEFT INLANE
65
LOOP CHALLENGE STARTED
104 SPOT NOTE LIT
27
RIGHT INLANE
66
SHOES STARTED
105 NOTE SPOTTED
28
RIGHT OUTLANE
67
2+ SHOES STARTED
106 NOTE AWARDED
29
UPPER PLYFLD VISITS
68
SHOE RECORDS
107 HIT AWARDED
30
UPPER PLYFLD NO FLIP
69
ASU STARTED
108 ENCORE STARTED
31
SUPER SPINNER STARTED
70
2+ ASU STARTED
109 ENCORE LETTER
32
SUPER SPINNER SPINS
71
ASU RECORDS
110 GRACELAND LIT
33
SKILL SHOT
72
1 SONG
111 GRACELAND START
34
HANDS FREE SKILL SHOT
73
2 SONGS
112 GL JUNGLE ROOM
35
SUPER SKILL SHOT
74
3 SONGS
113 GL POOL ROOM
36
SECRET SKILL SHOT
75
4 SONGS
114 GL MUSIC ROOM
37
SUPER SECRET SKLL SHOT
76
HITS COMPLETED
115 GL TV ROOM
38
SKILL SHOT RESTARTED
77
ELVIS COMPLETED
116 GL TROPHY ROOM
39
MYSTERY TOP 10
78
TOP 10 COMPLETED
Note: Audits are subject to change (with or without notice).
6HFWLRQ&KDSWHU
3DJH
*R7R
$XGLWV0HQX
*R7R3U LQWHU 0HQX 237, 21 $/86(21/<
Operational Usage Note: The use of the following Sub-Menus are OPTIONAL and provided as a
convenience only. No special equipment was included with your Pinball Game. To initiate, from the
AUDITS MENU, select the "PRNT" Icon with either the Red "LEFT" or Green "RIGHT" Button and
press the Black "ENTER" Button. The PRINTER MENU appears. A Quick / Full Printout Kit* and RS-232
Communication Device** (which can download serial information) are required for proper operation of these
Sub-Menus. Entering the menus & selecting/activating the Icons without the equipment mentioned, will not affect
the Pinball Game nor the operation of the Portals• Service Menu System in any way. For more details on the
equipment & hardware required, installation and set-up, read the Quick/Full Printout Set-Up Instruction Manual
(SPI Part Number: 780-6012-00) provided in the Quick/Full Printout Kit (SPI Part Number: 502-5031-00).
*Not included with this ToPS • Ready Pinball Game. **Not included in the Quick/Full Printout Kit.
4XLFN3ULQWRXW
To initiate, from the PRINTER MENU, select the "QUIK" Icon with either the Red or Green Button and
press the Black Button. Select either the "-" or "+" Mini-Icon and press the Black Button to start the
printout. Per the display instruction, the Start Button can also be pressed to start the printout. Only the
Earnings Audits can be retrieved and/or printed for further processing.
To initiate, from the PRINTER MENU, select the "ALISON" Icon with either the Red or Green Button and
press the Black Button. Select either the "-" or "+" Mini-Icon and press the Black Button to start the
download. Per the display instruction, the Start Button can also be pressed to start the download. All
Earnings, Standard, Feature & Tournament Audits can be retrieved and/or printed for further processing.
5HVHW3ULQWHU
To initiate, from the PRINTER MENU, select the "RESET" Icon with either the Red or Green Button and
press the Black Button. Select either the "-" or "+" Mini-Icon and press the Black Button to clear the
"Nº of copies printed" count total appearing in the display. Operational Usage Note: Activating the
"QUIK" Icon (in the previous Quick Printout) without the special equipment and unique software, will still provide a
"count total" in this Reset Printer Menu, which does not affect the operation of the Portals• Service Menu System
in any way. Activating this "RESET" Icon will reset the "count total" in the display to 00.
)($785($8',7$%%5(9,$7,21686(',17+,6&+$37(5
ASU
All
Shook Up
GL
Graceland
LTB
(Elvis has) Left
the Building
TCB
Taking Care (of)
Business
KORR
King of
Rock N’ Roll
MIL
PLYFLD
Million
XBALL or XB
Extra
Ball
Playfield
X
Multiplier
)RUKRZWR5(6(7$XGLWVVHH6HFWLRQ&KDSWHU*2725(6(70(18
(DUQLQJV 2QO\
*R7R
$XGLWV0HQX
(DUQLQJV $OO 6WDQGDUG )HDWXUH $XGLWV
6HFWLRQ&KDSWHU
3DJH
6HF*R7R$XGLWV
)XOO3ULQWRXW
CLICK THE RED BOX ON PAGE 33 TO RESET THIS PAGE. BE CAREFUL!
STARTING METER Reading :
STARTING METER Date (MM/DD/YR) :
AUDITOR’S NAME :
CURRENT METER Reading :
AUDIT Date (MM/DD/YR) :
CPU Version :
CURRENT VOLUME SETTING:
...... ......
......... ..
DISPLAY Version :
...... ......
........
GAME LOCATION NAME :
($51,1*667$1'$5'$8',77$%/(6
($51,1*6$8',76
01
02
03
04
05
TOTAL
PAID CREDITS
FREE GAME
PERCENTAGE
AVERAGE
BALL TIME
AVERAGE
GAME TIME
COINS THRU
LEFT SLOT
06
07
08
09
10
COINS THRU
RIGHT SLOT
COINS THRU
CENTER SLOT
COINS THRU
4TH SLOT
COINS THRU
5TH SLOT
COINS THRU
6TH SLOT
11
12
13
14
TOTAL
COINS
TOTAL
EARNINGS
METER
CLICKS
SOFTWARE
METER
67$1'$5'$8',76
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
TOTAL
BALLS PLAYED
TOTAL
EXTRA BALLS
EXTRA BALL
PERCENT
REPLAY 1
AWARDS
REPLAY 2+
AWARDS
TOTAL
REPLAYS
REPLAY
PERCENT
TOTAL
SPECIALS
SPECIAL
PERCENT
TOTAL
MATCHES
HIGH SCORE
AWARDS
HIGH SCORE
PERCENT
TOTAL
FREE PLAYS
TOTAL
PLAYS
0–1.9M
SCORES
2M–3.9M
SCORES
4M–5.9M
SCORES
6M–7.9M
SCORES
8M–9.9M
SCORES
10M–12.4M
SCORES
12.5M–14.9M
SCORES
15M–17.4M
SCORES
17.5M–19.9M
SCORES
20M–22.4M
SCORES
39
22.5M–24.9M
SCORES
25M–34.9M
SCORES
35M–49.9M
SCORES
50M–74.9M
SCORES
75M–99.9M
SCORES
100M–149.9M
SCORES
150M+
SCORES
AVERAGE
SCORES
SERVICE
CREDITS
BALL SEARCH
STARTED
LOST BALL
FEEDS
LOST BALL
GAME STARTS
LEFT
DRAINS
CENTER
DRAINS
RIGHT
DRAINS
40
TILTS
64
41
TOTAL
BALLS SAVED
65
42
PROPRIETARY
66
43
PROPRIETARY
67
44
PROPRIETARY
25
26
27
28
29
30
31
32
33
34
35
36
37
38
45
PROPRIETARY
46
PROPRIETARY
47
PROPRIETARY
48
PROPRIETARY
49
PROPRIETARY
50
52
BASE
REPLAY
LEFT FLIPPER
USED
RIGHT FLIPPER
USED
53
PROPRIETARY
54
PROPRIETARY
51
55
56
57
58
59
60
61
62
63
68
0–1 MINUTE
GAMES
1 – 1.5 MINUTE
GAMES
1.5 – 2 MINUTE
GAMES
2 – 2.5 MINUTE
GAMES
2.5 – 3 MINUTE
GAMES
3 – 3.5 MINUTE
GAMES
3.5 – 4 MINUTE
GAMES
4 – 5 MINUTE
GAMES
5 – 6 MINUTE
GAMES
6 – 8 MINUTE
GAMES
8 – 10 MINUTE
GAMES
10 – 15 MINUTE
GAMES
15+ MINUTE
GAMES
RECENT
REPLAY PERCENT
Note: Audits are subject to change (with or without notice).
CLICK THE RED BOX ON PAGE 33 TO RESET THIS PAGE. BE CAREFUL!
&RPPHQWV
)($785($8',77$%/(
)($785($8',76
352*5$00,1* 86( 21/< UNLABELED BOXES ARE FOR FUTURE EXPANSION.
01
SPINNER SPINS
40
MYSTERY ENCORE LETTER
79
GIFT LIT
02
LEFT ORBIT
41
MYSTERY XBALL LIT
80
GIFT AWARDED
03
LEFT RAMP
42
MYSTERY 1 MIL
81
GIFT VIDEO
04
CENTER LOOP
43
MYSTERY 10 MIL
82
GIFT RECORDS
05
RIGHT RAMP
44
MYSTERY BONUS X
83
GIFT KORR
06
RIGHT ORBIT
45
MYSTERY SPECIAL LIT
84
GIFT LITE XB
07
TOP LANES
46
MYSTERY TCB
85
GIFT ENCORE LETTER
08
TOP LANES COMPLETED
47
MYSTERY NOTE
86
FANS LEVEL 1
09
TOP LANES MAXED
48
MYSTERY 100K
87
FANS LEVEL 2
10
POP HITS
49
MYSTERY LTB
88
FANS LEVEL 3
11
SPOT NOTE TARGET
50
MYSTERY HOUND DOG
89
FANS LEVEL 4
12
HOUND DOG TARGET
51
MYSTERY HOTEL
90
FANS LEVEL 5
13
TOP EJECT
52
MYSTERY SHOES
91
LTB COLLECTED
14
CENTER EJECT
53
MYSTERY JAIL
92
TCB STARTED
15
CENTER EJECT BEHIND
54
MYSTERY SCREAMING FANS
93
TCB RESTARTED
16
HOTEL ARRIVALS
55
MYSTERY ALL SHOOK UP
94
TCB 2+ STARTS
17
HOTEL DOOR
56
HOUND DOG STARTED
95
SCARF MORE TIME
18
HOTEL TARGET
57
2+ HOUND DOG STARTED
96
SCARF ADD-A-BALL
19
DROP TARGET HITS
58
HOUND DOG RECORDS
97
SCARF NOTE
20
DROP BANKS COMPLETED
59
HOTEL STARTED
98
SCARF XB LIT
21
TCB TARGETS
60
2+ HOTEL STARTED
99
SCARF GIFT LIT
22
KING TARGETS
61
HOTEL RECORDS
100 SCARF LIT
23
KING COMPLETED
62
JAIL STARTED
101 SCARF AWARD
24
SCARF TARGET
63
2+ JAIL STARTED
102 KORR STARTED
25
LEFT OUTLANE
64
JAIL RECORDS
103 KORR AWARD
26
LEFT INLANE
65
LOOP CHALLENGE STARTED
104 SPOT NOTE LIT
27
RIGHT INLANE
66
SHOES STARTED
105 NOTE SPOTTED
28
RIGHT OUTLANE
67
2+ SHOES STARTED
106 NOTE AWARDED
29
UPPER PLYFLD VISITS
68
SHOE RECORDS
107 HIT AWARDED
30
UPPER PLYFLD NO FLIP
69
ASU STARTED
108 ENCORE STARTED
31
SUPER SPINNER STARTED
70
2+ ASU STARTED
109 ENCORE LETTER
32
SUPER SPINNER SPINS
71
ASU RECORDS
110 GRACELAND LIT
33
SKILL SHOT
72
1 SONG
111 GRACELAND START
34
HANDS FREE SKILL SHOT
73
2 SONGS
112 GL JUNGLE ROOM
35
SUPER SKILL SHOT
74
3 SONGS
113 GL POOL ROOM
36
SECRET SKILL SHOT
75
4 SONGS
114 GL MUSIC ROOM
37
SUPER SECRET SKLL SHOT
76
HITS COMPLETED
115 GL TV ROOM
38
SKILL SHOT RESTARTED
77
ELVIS COMPLETED
116 GL TROPHY ROOM
39
MYSTERY TOP 10
78
TOP 10 COMPLETED
Note: Audits are subject to change (with or without notice).
CLICK THE RED BOX ON PAGE 33 TO RESET THIS PAGE. BE CAREFUL!
08/7,:((.72851$0(17$8',77$%/(6
STARTING METER Reading :
STARTING METER Date (MM/DD/YR) :
AUDITOR’S NAME :
CURRENT METER Reading :
AUDIT Date (MM/DD/YR) :
CPU Version :
CURRENT VOLUME SETTING:
...... ......
......... ..
DISPLAY Version :
...... ......
........
06
04
TOTAL
PLAYS
TOURNAMENT
PLAYS
TOTAL
GAME EARNINGS
TOTAL
TOUR. EARNINGS
05
JACKPOT
10
01
02
03
07
08
09
NET
EARNINGS
ACCUM. TOTAL
PLAYS
ACCUM.
TOUR. PLAYS
ACCUM.
EARNINGS
ACCUM.
TOUR EARNINGS
STARTING METER Reading :
STARTING METER Date (MM/DD/YR) :
AUDITOR’S NAME :
CURRENT METER Reading :
AUDIT Date (MM/DD/YR) :
CPU Version :
GAME LOCATION NAME :
11
ACCUM.
JACKPOT
12
# TOURNAMENTS
CURRENT VOLUME SETTING:
...... ......
......... ..
DISPLAY Version :
...... ......
........
06
04
TOTAL
PLAYS
TOURNAMENT
PLAYS
TOTAL
GAME EARNINGS
TOTAL
TOUR. EARNINGS
05
JACKPOT
10
01
02
03
07
08
09
NET
EARNINGS
ACCUM. TOTAL
PLAYS
ACCUM.
TOUR. PLAYS
ACCUM.
EARNINGS
ACCUM.
TOUR EARNINGS
STARTING METER Reading :
STARTING METER Date (MM/DD/YR) :
AUDITOR’S NAME :
CURRENT METER Reading :
AUDIT Date (MM/DD/YR) :
CPU Version :
GAME LOCATION NAME :
11
ACCUM.
JACKPOT
12
# TOURNAMENTS
CURRENT VOLUME SETTING:
...... ......
......... ..
DISPLAY Version :
...... ......
........
06
04
TOTAL
PLAYS
TOURNAMENT
PLAYS
TOTAL
GAME EARNINGS
TOTAL
TOUR. EARNINGS
05
JACKPOT
10
01
02
03
07
08
09
NET
EARNINGS
ACCUM. TOTAL
PLAYS
ACCUM.
TOUR. PLAYS
ACCUM.
EARNINGS
ACCUM.
TOUR EARNINGS
STARTING METER Reading :
STARTING METER Date (MM/DD/YR) :
AUDITOR’S NAME :
CURRENT METER Reading :
AUDIT Date (MM/DD/YR) :
CPU Version :
GAME LOCATION NAME :
11
ACCUM.
JACKPOT
12
# TOURNAMENTS
CURRENT VOLUME SETTING:
...... ......
......... ..
DISPLAY Version :
...... ......
........
06
04
TOTAL
PLAYS
TOURNAMENT
PLAYS
TOTAL
GAME EARNINGS
TOTAL
TOUR. EARNINGS
05
JACKPOT
10
01
02
03
07
08
09
NET
EARNINGS
ACCUM. TOTAL
PLAYS
ACCUM.
TOUR. PLAYS
ACCUM.
EARNINGS
ACCUM.
TOUR EARNINGS
GAME LOCATION NAME :
11
ACCUM.
JACKPOT
12
# TOURNAMENTS
67$1'$5')($785(
$'-8670(177$%/(6
5HYLHZ2YHUYLHZUHJDUGLQJFKDQJHV
67$1'$5'$'- 8670(176 1U
6HF$GMXVWPHQWV
01
02*
03
04*
05
06
07*
08
09*
10*
11
12
13*
14
15
16
17
18
19
20
21
22
23*
24*
25*
26*
27*
28
86$
<285
$'-8670(17 1$0(
'()$8/7
6(77, 1*
AUTO
REPLAY TYPE
10%
REPLAY PERCENTAGE
CREDIT
REPLAY AWARD
1: 80,000,000
REPLAY LEVELS
YES
REPLAY BOOST
CREDIT
SPECIAL AWARD
2%
SPECIAL PERCENTAGE
05
FREE GAME LIMIT
09
EXTRA BALL LIMIT
25%
EXTRA BALL PERCENTAGE
USA 5
GAME PRICING
CREDIT
MATCH AWARD
9%
MATCH PERCENTAGE
03
BALLS PER GAME
01
TILT WARNINGS
30
CREDIT LIMIT
YES
ALLOW HIGH SCORES
01
GRAND CHAMPION AWARDS
01
HIGH SCORE #1 AWARDS
00
HIGH SCORE #2 AWARDS
00
HIGH SCORE #3 AWARDS
00
HIGH SCORE #4 AWARDS
GRAND CHAMPION SCORE 250,000,000
DEFAULT HIGH SCORE #1 200,000,000
DEFAULT HIGH SCORE #2 175,000,000
DEFAULT HIGH SCORE #3 150,000,000
DEFAULT HIGH SCORE #4 125,000,000
2,000
HSTD RESET COUNT
1U
29
30
31
32
33
34
35
36
37
38*
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
86$
'()$8/7
3 INITIALS
HIGH SCORE INITIALS
NO
FREE PLAY
ON
CUSTOM MESSAGE
NORMAL
FLASH LAMP POWER
NORMAL
COIL PULSE POWER
NORMAL
KNOCKER VOLUME
YES
GAME RESTART
NO
BILL VALIDATOR
01
BKGRND MUSIC VOLUME
0:10
FREEZE TIME
NO
UK POST SAVE ENABLED
OFF
TIMED PLUNGER
DISABLED
FLIPPER BALL LAUNCH
NO
COINDOOR BALL SAVER
NO
COMPETITION MODE
YES
CONSOLATION BALL
YES
FAST BOOT
COIN METER
Q24 OPTION
NO
TICKET DISP. INSTALLED
YES
ALLOW PLAYER COMP. MODE
NEVER
TECH ALERT WARNING
NO
TEAM SCORES
00
LOCATION ID
00
GAME ID
20
FLIPPER ADJ 1
50
FLIPPER ADJ 2
3
FLIPPER ADJ 3
$'-8670(17 1$0(
<285
6(77, 1*
* Defaults are subject to change during production (especially 02, 04, 07, 09, 10, 13, 23-27 & 38).
Note: If Game & Display ROMs other than USA are installed, along with the proper Dip Switch Settings, different Defaults will appear.
If changes are made (or your Defaults are not USA), enter them with pencil in the YOUR SETTING spaces provided for reference.
)($785($'- 8670(176 1U
01
02
03
04
05
06
07
08
$'-8670(17 1$0(
BLUE SUEDE
DIFFICULTY
HOUND DOG
DIFFICULTY
HOTEL
DIFFICULTY
ALL SHOOK UP
DIFFICULTY
JHR LOCK
DIFFICULTY
JHR 1ST 3-BALL
JAILHOUSE
NOTE
DIFFICULTY
SPOT NOTE
DIFFICULTY
6HFWLRQ&KDSWHU
3DJH
86$
'()$8/7
<285
6(77, 1*
1U
MODERATE
09
MODERATE
10
EX. EASY
11
EASY
12
EASY
13
02
14
MODERATE
15
EASY
16
6KRUWFXW WR 6WDQGDUG $GMXVWPHQW $'-8670(17 1$0(
SCREAMING FANS
DIFFICULTY
GIFT
DIFFICULTY
MAGNET
DIFFICULTY
SHOW
UPPER FLIPPER
SPOT ASU
ON BALL
TCB
MEMORY
KING
MEMORY
ADULT CONTENT
ENABLED
86$
'()$8/7
<285
6(77, 1*
MODERATE
MODERATE
HARD
YES
02
YES
YES
YES
*R7R
$GMXVWPHQWV0HQX
6HFWLRQ & KD SW H U R I *R 7 R $G M XV WP H Q WV 0 H Q X
2YHU YL HZ
The Portals• Service Menu System provides 71 Adjustments to vary Game Functions to customize for your
particular needs. The Adjustments are divided into 2 groups: Standard Adjustments (01-55) and Feature
Adjustments (01-16). Game code may get upgraded during production; compare all Adjustments in the display
with the manual and make any corrections to the Adjustment Table (previous page), as necessary. Adjustments
are subject to change (with or without notice). To view Adjustments in the display, enter the Portals• Service Menu
System. When a change is made and then the next / previous Adjustment is selected (or the Sub-Menu is exited),
the display will momentarily flash REQUEST INSTALLED. For further customization of Game Play Difficulty or
Game Play Type or how to RESET ONLY the Adjustments, see Section 3, Chapter 5, GO TO INSTALLS MENU.
Important: The Coin Door must be OPEN allowing the Memory Protect Switch
to be disabled, so any Adjustment changes can be made.
*272$'-8670(1760(18
After entering Portals• , the MAIN MENU now appears. Select the "ADJ" Icon in the MAIN MENU with
either the Red "LEFT" or Green "RIGHT" Buttons (the Flipper Buttons operates in the same manner)
and press the Black "ENTER" Button (the Start Button operates in the same manner). The
ADJUSTMENTS MENU appears. Continue through this chapter for the explanation & usage of the Icons in the
ADJUSTMENTS MENU.
6 W DQG DU G $G M X VW P H QW V To initiate, from the ADJUSTMENTS MENU, select the "S.P.I." Icon with either the Red "LEFT" or Green
"RIGHT" Buttons and press the Black "ENTER" Button. Select and activate either of the ">>" MiniIcons to view the next or previous Adjustment in this group. Select and activate either of the "-" or "+"
Mini-Icons to change the setting, if desired (the Default Setting is noted in the definitions below). The display will
describe the Adjustment Number, Adjustment Name and the Current Adjustment Setting. The current
Adjustment will remain in the display until the next Adjustment is view or when this Menu is exited.
6HF$GMXVWPHQWV
back to
Page 38
WARNING: Changes made in any Adjustments will be lost after a FACTORY RESET or removal of the CPU/Sound Board Batteries.
1U
67$1'$5' $'-8670(17 1$0( 'HILQLWLRQ
REPLAY TYPE: Set to AUTO, DYNAMIC, FIXED or NONE. Default is AUTO. Selecting NONE will make
Standard Adjustments 2-5 NOT AVAILABLE. Selecting FIXED will make Standard Adjustment 2 NOT
AVAILABLE. If selected AUTO, DYNAMIC or FIXED, you will need to then select the number of Replay
Levels and Score Threshold (in Standard Adj. 4) desired for the player to receive a Replay Award (select
type in Standard Adj. 3). The Default Score appears as a starting point after the Level amount is selected.
AUTO & DYNAMIC will then get based on the Replay Percentage (in Standard Adjustment 2).
01
x Select FIXED to give the player a Replay Award as the Score Threshold is reached. This Score
Threshold will not adjust up or down. x Select AUTO to give the player a Replay Award as the Score
Threshold is reached. This Score Threshold will automatically adjust up or down based on the Replay
Percentage chosen (in Std. Adj. 2). The game periodically adjusts based upon the Player Base Skill Level.
x Select DYNAMIC to give the player a Replay Award as the Score Threshold is reached. This Score
Threshold will go down every game based on the Replay Percentage selected. For (Dynamic) example, if
the Score Threshold is 50,000,00 and the Replay Percentage selected is 10%, every game a player does
not reach the Score Threshold, the score to reach will drop by 5,000,000 (10% of 50M). This will continue
every game until the Threshold Score is reached. Thus, if the score then drops to 15,000,000 after 7
games and is then achieved, the Replay Award is given. The original Score Threshold is added to
15,000,000 and is now 65,000,000. It will then take the same player 10 games to reach 15,000,000.
Standard Adjustments 02-11 continued on the next page.
*R7R
$GMXVWPHQWV0HQX
6HFWLRQ&KDSWHU
3DJH 020603
6WDQGDUG$GMXVWPHQWV&RQWLQX HG
67$1'$5' $'-8670(17 1$0( 'HILQLWLRQ
02 REPLAY PERCENTAGE: Set between 01% - 50. Default is 10%. This Adjustment is required if Standard
Adjustment 1 is set to AUTO or DYNAMIC.
to EXTRA BALL, CREDIT, TICKET* or TOKEN*. Default is CREDIT. Select EXTRA
03 REPLAY AWARD: Set
BALL if awarding a CREDIT, TICKET/TOKEN is prohibited in your area.
*If TICKET or TOKEN is selected, the game will require an optional Ticket or Token Dispenser
If selected Token, then Standard Ajustment 46, Q24 Option, must be changed accordingly.
04
05
06
07
08
6HF$GMXVWPHQWV
09
10
11
REPLAY LEVELS: Set between 1 - 4 for the number of Replay Levels to be active. Default is 1: 80,000,00.
A "Drop-Down" Table appears showing Replay Level 1. Adjust the Replay Level between 10M - 9.99B
(Default Score appears as a starting point) using the "-" or "+" Mini-Icons, then use the ">>" Mini-Icon to
go to next Level (if selected more than 1) and select the next highest Threshold Score(s) desired.
REPLAY BOOST: Set to YES or NO. Default is YES. This Adjustment works only when Standard
Adjustment 1, Replay Type, is set to FIXED or AUTO. When set to YES, while FIXED or AUTO maintains
the Replay Levels, Replay Boost works as follows: If the Replay Level is 7,000,000 (regardless of the
Replay Percentage), and the Player scores 20M, and receives the Replay Award, the next game the
Current Replay Level is added to this base. Thus the next game, the Replay Level is 14,000,000. The
Player agains scores 20M. The next game the Player will need to achieve 21,000,00 to earn the Replay
Award. If the Player does not achieve 21,000,000, the next game reverts back to the original 7,000,000 or
the new adjusted level maintained by the Fixed or Autopercentaging Feature.
SPECIAL AWARD: Set to EXTRA BALL, CREDIT, TICKET*, TOKEN* or POINTS. Default is CREDIT.
Select EXTRA BALL or POINTS if awarding a CREDIT or TICKET/TOKEN is prohibited in your area.
SPECIAL PERCENTAGE: Set between 1% - 5%. Default is 2%. This adjustment allows the operator to
adjust how frequently the Special Feature is made available to the player.
FREE GAME LIMIT: Set between 01 - 09, NO FREE GAMES or UNLIMITED. Default is 05. Set the
maximum number of Free Games that may be accumulated per game.
EXTRA BALL LIMIT: Set between 01 - 09, NO EXTRA BALLS or UNLIMITED. Default is 09. Set the
number of Extra Balls that may be accumulated per game.
EXTRA BALL PERCENTAGE: Set between 01% - 50%. Default is 25%. This adjustment allows the
operator to adjust how frequently the Extra Ball Feature is made available to the player.
GAME PRICING: There are two (2) methods available for Coin Switch Programming: Standard & Custom.
Set between USA 1 thru EURO 12 or CUSTOM. USA Factory Default Setting is USA 5.
The Dip Switch Settings (Sw. 300) on the CPU/Sound Board for each Country must match with what is shown
in the USA & Int’l. Standard Pricing Select Tables for your country to have correct operation (see the next page).
For a Standard Selection (USA or International): Select & activate either of the "-" or "+" Mini-Icons to move
backward or forward in the Display; With your choice appearing in the display, select & activate the ">>" Mini-Icon
to advance and "lock-in" the change (display will momentarily flash REQUEST INSTALLED).
If CUSTOM is selected (appears in display), after selecting & activating any Mini-Icon (except for "-" or "+"), the
display will momentarily flash REQUEST INSTALLED with the display "LEFT COIN: 0 PULSE" appearing. Use
the "<<" or ">>" Mini-Icons to select the next choice (see Table Examples below) and the "-" or "+" Mini-Icons to
customize the PULSES, CREDITS & CLICKS from 0 to 99.
The prescribed number of PULSES required for 1 CREDIT must be set according to the Pricing Scheme desired.
Some simple calculations are required to get the proper set-up. After customizing, test the set-up with appropriate
Coins or Bills and adjust, if necessary. Note: Clicks can be changed if an optional Coin Meter is installed.
In Example 1, note the LEFT (and RIGHT) COIN: 3 PULSES and ONE CREDIT: 4 PULSES. Since every Coin
inserted produces 3 Pulses & every Credit requires 4 Pulses, 2 Coins (50¢) will produce 6 Pulses (4 Pulses for
the 1st Credit + 2 Pulses remains in escrow). The 3rd Coin (75¢) provides another 3 Pulses for a total of 5
Pulses (4 Pulses for the 2nd Credit + 1 Pulse remains in es crow). The 4th Coin ($1.00) provides another 3
Pulses for a total of 4 Pulses (4 Pulses for the 3rd Credit + 0 Pulses remain). The CENTER COIN: 12 PULSES is
set this way (with a Bill Validator attached); every $1-Bill inserted produces 12 Pulses or 3 Credits.
LEFT
CENTER
RIGHT
4TH
25¢
$1.00
25¢
Not Used
Coin Mechanisms Used
Example 1
1 /50¢
2 /75¢ 3/ $1.00
Pricing Scheme Desired
LEFT
COIN:
CENTER
COIN:
RIGHT
COIN:
3
12
3
PULSES PULSES PULSES
FOURTH
ONE
COIN: CREDIT:
1
PULSE
4
BONUS
1:
BONUS
2:
BONUS
1:
BONUS
2:
LEFT
COIN:
0
0
0
0
1
4
1
1
CLICK
CLICKS
CLICK
CLICK
PULSES PULSES
PULSES CREDITS CREDITS
CENTER RIGHT FOURTH
COIN:
COIN:
COIN:
In Example 2, similar to Example 1, however, BONUS CREDITS are implemented. In addition to receiving 3
plays for every $1.00, the player is awarded an extra Credit for every 2nd dollar inserted before game start.
LEFT
CENTER
RIGHT
4TH
25¢
$1.00
25¢
Not Used
Coin Mechanisms Used
Example 2
1 /50¢
2 /75¢ 7/ $2.00
Pricing Scheme Desired
LEFT
COIN:
CENTER
COIN:
RIGHT
COIN:
3
12
3
PULSES PULSES PULSES
FOURTH
ONE
COIN: CREDIT:
1
PULSE
4
BONUS
1:
24
PULSES PULSES
BONUS
2:
BONUS
1:
BONUS
2:
LEFT
COIN:
CENTER RIGHT FOURTH
COIN:
COIN:
COIN:
0
1
0
1
4
1
1
PULSES
CREDIT
CREDITS
CLICK
CLICKS
CLICK
CLICK
Standard Adjustment 11, Custom Pricing, continued on the next page.
6HFWLRQ&KDSWHU
3DJH
*R7R
$GMXVWPHQWV0HQX
6WDQGDUG$GMXVWPHQW&RQWLQXHG
67$1'$5' $'-8670(17 1$0( 'HILQLWLRQ
In Example 3, a Pricing Scheme for a cheaper game is shown. An extra Pulse is put in escrow for every 25¢,
thus at 4X 25¢ inserted, another Credit is given, and the BONUS 1: 20 PULSES threshold is also met, so 6/
$1.00 is achieved. BONUS 2: 40 PULSES is set, so when this threshold is met with $2.00, 13 Credits are
produced.
LEFT
CENTER
RIGHT
4TH
25¢
$1.00
25¢
Not Used
Coin Mechanisms Used
Example 3
1 /25¢ 6/ $1.00 13/ $2.00
Pricing Scheme Desired
LEFT
COIN:
CENTER
COIN:
RIGHT
COIN:
5
20
5
FOURTH
ONE
COIN: CREDIT:
0
4
BONUS
1:
BONUS
2:
20
PULSES PULSES PULSES PULSES PULSES PULSES
BONUS
1:
BONUS
2:
LEFT
COIN:
CENTER RIGHT FOURTH
COIN:
COIN:
COIN:
40
1
0
1
4
1
1
PULSES
CREDIT
CREDITS
CLICK
CLICKS
CLICK
CLICK
In Example 4, a Pricing Scheme using a different currency (i.e. British Sterling) is shown to provide another way
coins (or tokens) can be utilized to custom tailor to your own needs.
LEFT
CENTER
RIGHT
4TH
10p
50p
£1
20p
Coin Mechanisms Used
Example 4
1 /30p
2 /50p
5 /£1
Pricing Scheme Desired
LEFT
COIN:
CENTER
COIN:
RIGHT
COIN:
1
6
15
PULSE
FOURTH
ONE
COIN: CREDIT:
2
3
BONUS
1:
BONUS
2:
BONUS
1:
BONUS
2:
LEFT
COIN:
0
0
0
0
1
4
1
1
CLICK
CLICKS
CLICK
CLICK
PULSES PULSES PULSES PULSES PULSES
PULSES CREDITS CREDITS
CENTER RIGHT FOURTH
COIN:
COIN:
COIN:
86$,QWHUQDWLRQDOQRQ(XUR6WDQGDUG3ULFLQJ6HOHFW7DEOHV
Pos.
ON
OFF
Pos.
ON
OFF
Pos.
ON
OFF
Pos.
ON
OFF
Pos.
ON
OFF
Pos.
ON
OFF
Pos.
ON
OFF
Pos.
ON
OFF
Pos.
ON
OFF
Pos.
ON
OFF
Pos.
ON
OFF
Pos.
ON
OFF
99999999
COIN MECHANISMS (SWITCHES)
COINS THRU ... SLOT:
LEFT CENTER RIGHT
4TH
COUNTRY
SETTING
OPTION(S)
/()7
Alternate Settings
USA 1
USA 2
USA 3
USA 4
USA 5
USA 6
USA 7
USA 8
ª
$.25
&(17(5
5,*+7
$1.00
9
888
9999
/()7
UK 1
UK 2
UK 3
UK 4
UK 5
UK 6
10p
©
&(17(5
50p
ª
Can$2
5 kuna
10 DKr
20 DKr
ª
1 /$.25
1 /$.50
1 /$.50
1 /$.50
1 /$.50
1 /$.50
1 /$.50
1 /$.50
2 /$.75
3 /$1.00
For USA Defaults 6 & 7 use:
5 /$2.00 755-5400-02
2 /’4 X 25¢’ 3 /$1.00 Bill
4 /$1.50
6 /$2.00
3 /$1.00
755-5400-01
755-5400-02
755-5400-02
755-5400-02
755-5400-00
9
Used to promote
the Bill Validator.
755-5400-00
755-5406-00
(Side 1)
1 /$A1
1 /$A1
3 /$A2
1 /50¢
2 /75¢
1 /3 kuna
2 /5 kuna
1 /3 DKr
1 /2 DKr
2 /5 DKr
3 /5 DKr
1 /100¥
1 /100¥
3 /200¥
755-5408-01
(2-Sided)
3/ Can$1
755-5400-00
or -01 or -02
755-5410-00
(2-Sided)
7 /10 DKr
755-5402-00
(2-Sided)
100¥
ª
$NZ2
ª
1 /$NZ1
1 /$NZ1
3 /$NZ2
755-5406-00
(Side 2)
20 NKr
ª
1 /5 NKr
1 /10 NKr
3 /20 NKr
755-5403-00
(2-Sided)
R2
R5
755-5409-01
(2-Sided)
1 /R2
10 SKr
ª 1 /10 SKr
2 /15 SKr
3 /20 SKr
5 SwF
ª 1 /1 SwF
6 /5 SwF
3 /2 SwF
9 /5 SwF
5,*+7
£1
ª
$A2
Can$1
Requires SPI
Coin Card(s)
Part Number
7+
$.25
8 88
Australia 1 © 20¢
$A1
9
9 9 9 9 Australia 2
88
Can$.25 Can$.25
9 9 9 9 9 9 Canada
88 8
1 kuna 2 kuna
9
9 9 9 9 Croatia
8
8
Denmark 1 © 1 DKr
5 DKr
9 9 9 9 9 9 Denmark 2
8 8 8
Japan 1
9 9 9 9 9 Japan 2 © 100¥
8
New Zealand 1 ©
9 9 9 9 9 9 9 New Zealand 2 $NZ1
8 8
Norway 1 © 10 NKr 5 NKr
9 9 9 9 9 9 Norway 2
8 8
R1
9 9 9 9 9 9 South Africa 50c
88 8
Sweden 1 © 1 SKr
5 SKr
9 9 9 9 9 Sweden 2
88
Switzerland 1 ©
99
9 9 9 9 Switzerland 2 1 SwF 2 SwF
PRICING SCHEME
Number of Plays (Credits) for Price Amount Shown
See "Appendix J" for Coin Cards Examples & Info!
7+
20p
1 /5 SKr
1 /1 SwF
7+
755-5404-00
(2-Sided)
755-5405-00
(2-Sided)
UK also utilizes the 5th Coin Slot Switch (not available with Custom Pricing).
£2
ª
3 /£1
4 /£1
1 /50p
1 /30p
1 /£1
3 /£2
7 /£2
5 /£2
4 /£1
3 /£2
*use blank side
755-5407-00
755-5407-01*
755-5407-01
755-5407-01*
755-5407-01
755-5407-01*
Note: The Country Setting Option above noted with "«" & "»" denotes the Factory Default Setting (subject to change).
Standard Adjustment 11, Custom Pricing, and Std. Adj. 12-17 continued on the next page.
*R7R
$GMXVWPHQWV0HQX
6HFWLRQ&KDSWHU
3DJH
6HF$GMXVWPHQWV
CPU/SOUND BOARD
DIP SWITCH 300
SETTING
6WDQGDUG$GMXVWPHQW&RQWLQXHG
67$1'$5' $'-8670(17 1$0( 'HILQLWLRQ
(XUR6XPPDU\,QWHUQDWLRQDO(XUR6WDQGDUG3ULFLQJ6HOHFW7DEOH
CPU/SOUND BOARD
DIP SWITCH 300
SETTING
COIN MECHANISMS (SWITCHES)
COINS THRU ... SLOT:
LEFT CENTER RIGHT
4TH
COUNTRY
SETTING
OPTION(S)
PRICING SCHEME
Number of Plays (Credits) for Price Amount Shown
See "Appendix J" for Coin Cards Examples & Info!
Pos.
S E E B E L O W
S E T T I N G S
ON
OFF
Euro 1-12 are alternate settings for
countries using the Euro:
If choosing an alternate Euro Setting
other than your Country’s Default,
please remember to use your
Country Dip Switch Setting.
Euro 1
Euro 2
Euro 3
Euro 4
Euro 5
Euro 6
Euro 7
Euro 8
Euro 9
Euro 10
Euro 11
Euro 12
L.50
L1.00 L2.00
1 /L.50
1 /L.50
1 /L.50
1 /L.50
1 /L.50
2 /L.50
1 /L1.00
1 /L1.00
1 /L1.00
1 /L1.00
1 /L1.00
2 /L1.00
optional
L.20
optional
5 /L2.00
3 /L1.00
6 /L2.00
3 /L1.00
5 /L4.00
3 /L2.00
2 /L1.50
3 /L2.00
4 /L2.00
9 /L4.00
7 /L2.00
3 /L2.00
7 /L3.00
Requires SPI
Coin Card(s)
Part Number
755-5401-01
755-5401-02
755-5401-03
755-5401-04
755-5401-05
755-5401-06
755-5401-07
755-5401-08
755-5401-09
755-5401-10
755-5401-11
755-5401-12
For a different Euro Pricing Scheme (other than below default), scroll through Standard Adjustment 11: Euro 1-12 or CUSTOM* for new
setting (reference above Euro 1-12 Summary). * Note: Unique Coin Door & Mech. for Germany, Italy & Portugal must use CUSTOM.
Pos.
ON
OFF
Pos.
ON
OFF
Pos.
ON
OFF
6HF$GMXVWPHQWV
Pos.
ON
OFF
Pos.
ON
OFF
Pos.
ON
OFF
Pos.
ON
OFF
Pos.
ON
OFF
Pos.
ON
OFF
Pos.
ON
OFF
8
9999999
8
9 999999
8 8
9 99999
88
9
99999
888
99999
8888
9999
8
999 9999
8
99 99999
8
8
999 999
8
8
9 99 999
Austria
Euro 9
L.50
L1.00 L2.00
1 /L1.00
Belgium
Euro 1
L.50
L1.00 L2.00
1 /L.50
Finland
Euro 8
L.50
L1.00 L2.00
1 /L1.00
3 /L2.00
France
Euro 10
0,50 L
1,00 L
1 /1,00 L
3 /2,00 L
1 /0,50¢
1 /0,50¢
1 /0,50¢
5 /L2,00
6 /L2,00
Germany 1
Germany 2 ©
Germany 3
2,00 L
L0,50 L1,00 L2,00
L.50
L1.00 L2.00
L.50
L.50
Netherlands
Euro 3
L.50
Portugal
Spain
Euro 3
Greece
Euro 6
Italy 1
Italy 2
©
ª
2 /L1.50
3 /L2.00
755-5401-01
755-5401-08
7 /3,00 L
755-5401-10
755-5401-01
755-5401-02
755-5401-04
2 /L.50
ª
755-5401-09
755-5401-06
1 /.50¢
1 /L1.00
3 /L2.00
755-5401-01 &
755-5401-08
L1.00 L2.00
1 /L.50
3 /L1.00
755-5401-03
L.50
L.50
1 /L.50
L.50
L1.00 L2.00
1 /L.50
755-5401-01
3 /L1.00
755-5401-03
Note: The Country Setting Option above noted with "«" & "»" denotes the Factory Default Setting (subject to change).
12 MATCH AWARD: Set to CREDIT, TICKET* or TOKEN*. Default is CREDIT.
*If TICKET or TOKEN is selected, the game will require an optional Ticket or Token Dispenser
If selected Token, then Standard Ajustment 46, Q24 Option, must be changed accordingly.
13
14
15
16
MATCH PERCENTAGE: Set between 0% - 10% or OFF. Default is 9%. At 0% the match display occurs at
the end of the game but never awards a Credit. Set to OFF, no Match Animation Feature is shown.
BALLS PER GAME: Set between 02 - 10. Default is 03. Set the number of balls per game.
TILT WARNINGS: Set to 00, 01 or 03. Default is 01. Set the number of Plumb Bob Tilt Switch closures
before the ball in play is tilted.
CREDIT LIMIT: Set between 04 - 50. Default is 30. Set the maximum credits allowed.
ALLOW HIGH SCORES: Set to YES or NO. Default is YES. When set to YES if a player exceeds any 1 of
the 4 High Scores, the player may receive an award (depending on Standard Adjustment 03, Replay
17
Award). Set to NO to disable this feature. There are 5 High Scores that will allow the player to enter their
initials (or name) (see Standard Adjustment 29, High Score Initials).
Standard Adjustments 18-38 continued on the next page.
6HFWLRQ&KDSWHU
3DJH
*R7R
$GMXVWPHQWV0HQX
18 GRAND CHAMPION AWARDS: Set between 00 - 05. Default is 01. Set the number of awards, awarded
for exceeding Level 1 (the highest of the five (5) Levels).
19 HIGH SCORE #1 AWARDS: Set between 00 - 03. Default is 01. Set the number of awards, awarded for
exceeding Level 2.
20 HIGH SCORE #2 AWARDS: Set between 00 - 02. Default is 00. Set the number of awards, awarded for
exceeding Level 3.
HIGH SCORE #3 AWARDS: Set between 00 - 01. Default is 00. Set the number of awards, awarded for
21
exceeding Level 4.
HIGH SCORE #4 AWARDS: Set between 00 - 01. Default is 00. Set the number of awards, awarded for
22
exceeding Level 5.
GRAND CHAMPION SCORE: Set between 1,000,000 - 9,999,000,000 or 00 (increments of 1M). Default is
250,000,000. Set the desired High Score Level to which Level 1 may be achieved. A score higher than
23
the default, cannot be reset by Standard Adjustment 28, HSTD Reset Count. The High Score will revert
to the Default Score ONLY if a Factory Reset is done or the batteries are removed from the CPU/Snd. Bd.
DEFAULT HIGH SCORE #1: Set between 1,000,000 - 9,999,000,000 or 00 (increments of 1M). Default is
24
200,000,000. Set the desired High Score Level to which Level 2 may be achieved. Read Std. Adj. 28.
DEFAULT HIGH SCORE #2: Set between 1,000,000 - 9,999,000,000 or 00 (increments of 1M). Default is
25
175,000,000. Set the desired High Score Level to which Level 3 may be achieved. Read Std. Adj. 28.
DEFAULT HIGH SCORE #3: Set between 1,000,000 - 9,999,000,000 or 00 (increments of 1M). Default is
26
150,000,000. Set the desired High Score Level to which Level 4 may be achieved. Read Std. Adj. 28.
DEFAULT
HIGH SCORE #4: Set between 1,000,000 - 9,999,000,000 or 00 (increments of 1M). Default is
27
125,000,000. Set the desired High Score Level to which Level 5 may be achieved. Read Std. Adj. 28.
HSTD RESET COUNT: Set between 100 - 9,900 or OFF (increments of 100). Default is 2,000. HSTD
28
(High Score To Date). Set the number of games between "automatic resets of High Score Levels" to
"Default Scores" for ONLY Standard Adj. 24-27, Default High Score #1-#4.
HIGH SCORE INITIALS: Set to 3 INITIALS or 10 LETTER. Default is 3 INITIALS. When set to 3
29
INITIALS, the player is allowed only 3 initials to input. When set to 10 LETTER NAME, the player is
allowed to enter 10 initials to input.
30 FREE PLAY: Set to YES or NO. Default is NO. When set to YES, no coins are required for Game Play.
CUSTOM MESSAGE: Set to ON, CHANGE or OFF. Default is ON. When set to CHANGE, a new
message can be set or the old one can be edited (select the "+" Mini-Icon to change settings until
"CHANGE"
appears in the display, then select the ">>" Mini-Icon to access.). This adjustment can be
31
accessed in two (2) ways by either selecting the "S.P.I." Icon and advancing to this Adjustment, or can be
directly accessed by selecting the "ABCD CUST MSG" Icon in the ADJUSTMENTS MENU.
View the Custom Message Shortcut summary (end of this chapter) for how to enter text or symbols.
32 FLASH LAMP POWER: Set to NORMAL, DIM or OFF. Default is NORMAL. When set to DIM, the Flash
Lamps impulse power is reduced by 25% and when set to OFF the Flash Lamps will not flash.
COIL PULSE POWER: Set to NORMAL, HARD or SOFT. Default is NORMAL. When set to HARD, the
coil pulse power is increased by 12.5% of the normal pulse rate. When set to SOFT the coil pulse power
33
is decreased by 12.5% of the normal pulse rate. This adj. is provided to compensate for Low Line or High
Line voltage conditions where the solenoids (coils) appear to kicking too weak or too hard. Adjust as
required.
KNOCKER VOLUME: Set to NORMAL, LOW or OFF. Default is NORMAL. When set to LOW, the volume
34
is decreased 50%. When set to OFF, no sound is heard when the "knocker" is sounded.
GAME RESTART: Set to YES or NO. Default is YES. When set to YES, a new game may be started
during any ball after the first ball is completed (if credits are available). Pressing the Start Button during
35
the first ball will add additional players. When set to NO, the game disables the Start Button after the first
ball until the final ball is in play. Review Sec. 2, Chp. 1, GAME OPERATIONS & FEATURES, for details.
BILL VALIDATOR: Set to YES or NO. Default is NO. When set to YES, in Game Attract Mode the Display
36
will show an "Insert Bill Animation." When set to NO, the Display will show an "Insert Coin Animation."
BKGRND (BACKGROUND) MUSIC VOLUME: Set between 01 - 15. Default is 01. After volume is set via
Portals Service Buttons (see Section 3, Chapter 1, PORTALS SERVICE MENU INTRODUCTION) this
37
adjustment can be utilized to adjust the background music (1 all the way on, 15 all the way off) while
keeping the Special Sound FX the same level.
FREEZE TIME (BALL SAVE): Set to OFF, 0:01-0:15 or AUTO. Default is 0:10. When set to OFF this
feature is unavailable. Set between 0:01 through 0:15 (single increments) for the ball to be sent back into
38
play if the time set is not met (per ball). Set to AUTO to automatically adjust the Freeze Timer based on
the average ball time.
Standard Adjustments 39-52 continued on the next page.
*R7R
$GMXVWPHQWV0HQX
6HFWLRQ&KDSWHU
3DJH
6HF$GMXVWPHQWV
6WDQGDUG$GM XVWPHQWV&RQWLQX HG
67$1'$5' $'-8670(17 1$0( 'HILQLWLRQ
6WDQGDUG$GM XVWPHQWV&RQWLQX HG
67$1'$5' $'-8670(17 1$0( 'HILQLWLRQ
39
40
41
42
43
44
45
6HF$GMXVWPHQWV
46
47
48
49
50
51
52
UK ONLY Dip Switch Must Be Set UK POST SAVE ENABLED: Set to YES or NO. Default is NO, (UK Default is YES). When set to YES
this feature is available when lit. Set to NO to disable this feature. (UK Games have Outlane/Center Post
Save Devices which are accessed in differently; Non-UK Games cannot adjust this setting.)
TIMED PLUNGER: Set to OFF or 0:15 - 1:00. Default is OFF. When set to 0:15 to 1:00, the plunger will
"Autoplunge" the ball (at the time set) when the ball is at the beginning of play, awaiting the skill shot by
the player.
FLIPPER BALL LAUNCH: Set to DISABLED, LEFT FLIPPER, RIGHT FLIPPER, EITHER FLIPPER or
BOTH FLIPPERS. Default is DISABLED. This feature allows the player to operate the Auto Ball Launch
with the FLIPPER BUTTON(S) depending on which setting is chosen.
COINDOOR BALL SAVER: Set to YES or NO. Default is NO. When set to NO, this feature is not
available. When set to YES, this feature allows the Coin Door to be opened during game play; the ball
will drain but the game will be placed "on hold". When the Coin Door is closed, the pinball will return to
the Shooter Lane, and the game will resume.
COMPETITION MODE: Set to YES or NO. Default is NO. When set to NO, this feature is not available. If
an Install of either $.50 or Free Play Comp. was made (changing default to YES), and was changed
back to NO, the COMPETITION MODE will be turned OFF (see Sec. 3, Chp. 5, GO TO INSTALLS MENU,
$. 50 or Free Play Competition). Set to YES, this feature is available (required for Competition Modes);
this feature will equalize random game features and global score values during multi-player games.
CONSOLATION BALL: Set to YES or NO. Default is YES. When set to YES, the EXTRA BALL (Playfield
Light Insert, location varies) will be lit on the last ball in play, if certain programming criteria is met.
FAST BOOT: Set to YES or NO. Default is YES. When set to NO or if you hold the RIGHT Flipper Button
during Power-Up, this feature is not available and will display all normal Power-Up screens. When set to
YES, the game will not display the normal informative Power-Up screens, specifically the CPU Version
screen and the Location/Game ID screen. Regardless of the setting, normal Power-Up safety checks are
still performed.
Q24 OPTION: Set to COIN METER, TOKEN DISPENSER or KNOCKER. Default is COIN METER. This
Coil (Solenoid) Location is left "open" at the Factory to allow for these optional Mechanisms to be added
to the game. If selecting TOKEN DISPENSER, Standard Adjustments 03, 06 & 12 should be changed to
TOKEN. Call Technical Support at 1-800-542-5377 if more information is required on this option.
TICKET DISP. INSTALLED: Set to YES or NO. Default is NO. This adjustment is required only for games
which have an optional Deltronics (DL-1275-2 PCB Style, SPI Part Nr. 515-7275-00) Ticket Dispenser
installed. Unique CPU Sound Bd. Dip Switch (Sw. 300) Setting required, changes the Default to YES.
ALLOW PLAYER COMP. MODE: Set to YES or NO. Default is YES. Competition Mode unrandomizes
feature events, and standardizes game play and rule sets (varies from game to game) for fair competitions. With adequate credit, to enter Competition Mode, hold the Flipper Button in while pressing the
Start Button. Watch the Dot Display for more details (rules and operation are subject to change).
General rules are covered in the Instruction Card. Other Hints and/or Rules can be made known on this
game either visually (the Dot Display or Flashing Light Inserts) or can be audible.
TECH ALERT WARNING: A Portals Function. Review Sec. 3, Chp. 2, GO TO DIAGNOSTICS MENU,
Page 25, regarding Technician Alerts and its’ functions. Set to NEVER, POWERUP, COIN DOOR or
POWERUP AND COIN DOOR. Default is NEVER. When set to NEVER, the Tech Report Alert display
will not appear upon Power-Up or opening the Coin Door, if the game detects any problems. When set to
POWERUP, the display will appear only upon Power-Up (if problems detected). When set to COIN
DOOR, the display will appear only when the Coin Door is opened (if problems detected). When set to
POWERUP AND COIN DOOR, the display will appear upon Power-Up and if the Coin Door is opened (if
problems detected).
TEAM SCORES: Set to YES or NO. Default is NO. Set to YES, then Team Play will be made available.
Team Play only works in a 4-Player Game. The totals for Players 1 / 3 (Team 1) & Players 2 / 4 (Team 2)
are then displayed individually as well as the combined score for BOTH TEAMS to enable Team Play
(Doubles). See Section 2, Chapter 1, Game Operation & Features, for non-adjustable Features.
LOCATION ID: Set between 00 to 9999. Default is 00. This adjustment allows the operator to assign a
location identification number to the audit print-out sheet. (Will not be affected by Factory Reset.)
GAME ID: Set between 00 to 9999. Default is 00. This adjustment allows the operator to assign a game
identification number to the audit print-out sheet. (Will not be affected by Factory Reset.)
Standard Adjustments 53-55 continued on the next page.
6HFWLRQ&KDSWHU
3DJH
*R7R
$GMXVWPHQWV0HQX
6WDQGDUG$GM XVWPHQWV&RQWLQX HG
67$1'$5' $'-8670(17 1$0( 'HILQLWLRQ
53 FLIPPER ADJ 1: Set between 05 to 40. Default is 20. This adjustment sets the minimum fire time for a
flipper coil in milliseconds.
54 FLIPPER ADJ 2: Set between 40 to 60. Default is 50. This adjustment sets the maximum fire time for a
flipper coil in milliseconds.
55 FLIPPER ADJ 3: Set between 0 to 10. Default is 3. This adjustment sets the amount of time to fire the coil
after the EOS switch is seen in milliseconds.
Standard Adjustments 53-55 Note:
Flippers will now fire when the button is pushed until the
End-of-Stroke (EOS) Switch closure is seen. When EOS is seen, continue firing for the amount of time in
Std. Adj. 55. When this time is expired, if the minimum time has not yet been met (Std. Adj. 53), then keep
firing until it has. Otherwise switch to hold power.
If the flipper has been firing and it reaches the
If the flipper caves-in (EOS re-closes) while the
maximum (Std. Adj. 54), then switch to hold power.
button is still held, then refire the flipper at full power. Switch to hold power as soon as EOS is seen, no
minimum times are enforced in this situation.
If the flipper caves in several times on the same single
flipper button press, then stop refiring at full power and just stay at hold.
If the flipper fails to open the
EOS switch several times, then assume it isn’t working and fall back to a "safe" fire time so as not to burn
up the coil.
To initiate, from the ADJUSTMENTS MENU, select the "ELVIS" Icon with either the Red "LEFT" or
Green "RIGHT" Buttons and press the Black "ENTER" Button. Select and activate either of the ">>"
Mini-Icons to view the next or previous Adjustment in this group. Select and activate either of the "-" or
"+" Mini-Icons to change the setting, if desired (the Default Setting is noted in the definitions below). The display
will describe the Adjustment Number, Adjustment Name and the Current Adjustment Setting. The current
Adjustment will remain in the display until the next Adjustment is view or when this Menu is exited. Game Play,
Rules, Settings and Explanation Subject to Change.
1U
01
02
03
04
05
06
07
08
)($785( $'-8670(17 1$0( 'HILQLWLRQ
BLUE SUEDE DIFFICULTY : Set to EASY, MODERATE or HARD. Default is MODERATE.
Controls the number of loops (orbits) required to start Blue Suede Shoes and how many shots are
needed to collect Gold Records.
HOUND DOG DIFFICULTY : Set to EASY, MODERATE or HARD. Default is MODERATE.
Controls the number of dog hits required to start Hound Dog and how many switches are needed to
collect Gold Records.
HOTEL DIFFICULTY : Set to EX. EASY, EASY, MODERATE, HARD or EX. HARD. Default is EX. EASY.
Specifies how hard it is to open the Hotel Door. EXTRA EASY - door is open. EASY - Any target hit
opens door. MODERATE - Only hitting the door opens the door. HARD - Hit all 3 targets in any order to
open door. EXTRA HARD - Targets light 1 at a time; hit all 3 to open door.
ALL SHOOK UP DIFFICULTY : Set to EX. EASY, EASY, MODERATE, HARD or EX. HARD. Default is
EASY. Specifies how easy it is to start All Shook Up. EXTRA EASY - any shot spots any other shot.
EASY - All 3 shots must be shot individually in any order. MODERATE - Each shot must be made in
ALL-SHOOK-UP order. HARD - Must shoot each shot twice. EXTRA HARD - Must shoot each shot
twice in ALL-SHOOK-UP order.
JHR (JAILHOUSE ROCK) LOCK DIFFICULTY : Set to EX. EASY, EASY, MODERATE, HARD or
EX. HARD. Default is EASY. EXTRA EASY - Locks are lit, a shot from the front or back will count.
EASY - Locks are lit, only shots from the front count. MODERATE - Front or back shot lights lock, only
front will lock. HARD - Only front lights lock and locks balls. EXTRA HARD - Only timed shots from the
left inlane light lock, any shot from front will lock.
JHR 1ST 3-BALL : Set between 01 to 05. Default is 02. Specifies which Jailhouse Rock Multiball is the
first one to require 3 locks.
NOTE DIFFICULTY : Set to EX. EASY, EASY, MODERATE, HARD or EX. HARD. Default is MODERATE.
Specifies how easy it is to earn Top Ten Records by adjusting which and shot many notes are lit.
SPOT NOTE DIFFICULTY : Set to EX. EASY, EASY, MODERATE, HARD or EX. HARD. Default is EASY.
Specifies how often the Spot Note target is lit. EXTRA EASY - Always on. EASY - Lit at ball start.
MODERATE - Lit at game start with memory from ball-to-ball. HARD - Off at game start with memory
from ball-to-ball. EXTRA HARD - Off at ball start.
Feature Adjustments 09-16 continued on the next page.
*R7R
$GMXVWPHQWV0HQX
6HFWLRQ&KDSWHU
3DJH
6HF$GMXVWPHQWV
)HDWX UH$GMX VWPHQWV
)H DWX UH $GMX VWPH QWV&RQWLQXH G
09
10
11
12
13
14
15
16
)($785( $'-8670(17 1$0( 'HILQLWLRQ
SCREAMING FANS DIFF. : Set to EX. EASY, EASY, MODERATE, HARD or EX. HARD. Default is
MODERATE. Controls which awards are given away from the Right Ramp.
GIFT DIFFICULTY : Set to MODERATE or HARD. Default is MODERATE. Controls whether Gifts of Elvis
can stack or not. MODERATE - gifts stack. HARD - gifts don’t stack.
MAGNET DIFFICULTY : Set to EASY, MODERATE or HARD. Default is HARD. Controls how often the
magnet grabs the ball. EASY - magnet grabs ball coming out of the pop bumpers or the hotel.
MODERATE - magnet grabs ball coming out of the pop bumpers. HARD - magnet only grabs the ball for
Blue Suede Shoes shots.
SHOW UPPER FLIPPER: Set to YES or NO. Default is YES. Controls whether the game will show the
flipper to the player the first time the magnet grabs the ball. When set to YES, the game will flip (actuate
the coil) the Upper Right Flipper (below Magnet in the Right Orbit) in an attempt to get players to notice
this potential shot (center loop) when it is fed for the first time. If the player is about to have a ball get
stopped by the magnet in the Right Orbit, the game will flip the Upper Right Flipper 3 times. This will not
occur if the first feed to a Flipper is during any Multiball Mode.
SPOT ASU (ALL SHOOK UP) ON BALL : Set to OFF, 01 to 03. Default is 02. Specifies on which ball the
game will spot the UP (right ramp) shot for All Shook Up if it hasn’t been earned yet.
TCB MEMORY: Set to YES or NO. Default is YES. Specifies whether the T-C-B Targets stay lit from
ball-to-ball.
KING MEMORY: Set to YES or NO. Default is YES. Specifies whether the K-I-N-G Targets stay lit from
ball-to-ball.
ADULT CONTENT ENABLED: Set to YES or NO. Default is YES. Controls whether the game will make
use of more mature content. Set to NO to disable "adult content" in both audible (sounds and/or words).
Visual (dot display graphics) may be included, if present.
6HF$GMXVWPHQWV
&XVW RP0HVVDJH
To go directly to Standard Adjustment 31, Custom Message, from the ADJUSTMENT MENU, select
the "CUST MSG" Icon with either the Red "LEFT" or Green "RIGHT" Buttons and press the Black
"ENTER" Button. At the top left corner of the Display, the letter A is indicated (blinking) in the first
available position (Thirty-Six (36) characters including spaces are available). Vary the letter(s) by operating the
Left and Right Flipper Buttons (or "RED" or "GREEN" Buttons). With the desired letter indicated, depress the
Start Button to lock in the letter and advance to the next character. Repeat this procedure until the desired
message is completed in the display. Select the "<" or ">" characters to back-space (erase) and/or to move
forward in an already typed message. After completion, press the "BLACK" Button, "REQUEST INSTALLED" is
indicated and then exits this sub-menu.
)RUIXUWKHUFXVWRPL]DWLRQRI*DPH3OD\'LIILFXOW\RU*DPH3OD\7\SHRUKRZWR
5(6(721/<WKH$GMXVWPHQWVVHH6HFWLRQ&KDSWHU*272,167$//60(18
6HOHFW DQ\ ,QVWDOOV
6HFWLRQ&KDSWHU
3DJH
5HVHW DOO $GMXVWPHQWV ,QVWDOOV
*R7R
$GMXVWPHQWV0HQX
6HFWLR Q &K DS WHU RI *R 7R ,QVWDOOV0H QX
2YHU YL HZ
The Portals• Service Menu System provides 15 Installs to vary Game Play (Feature Adjustments) Difficulty
or Game Play Type and Install Factory (restores all adjustments to Factory Defaults).
Important: The Coin Door must be OPEN allowing the Memory Protect Switch
to be disabled, so any Install changes can be made.
For detailed customization or to check current Adjustments Defaults (either changed by YOU in the
Adjustments Menu or by this Installs Menu or for Factory Default Settings), see Section 3, Chapter 4, GO TO
ADJUSTMENTS MENU. Important: Before preceding, write down any previously changed Adjustment
Defaults. After completing one or more of the Installs in this Chapter, go back to the ADJUSTMENTS MENU to
see which Standard and/or Feature Adjustments have changed (Feature Adjustments and/or settings are
subject to change during production, and may differ than what is described in the tables at the end of this chapter).
If the settings are not to your liking, perform one of the following:
1.: Manually change the Standard & Feature Adjustments Settings (perform task in the ADJUSTMENTS
MENU, see Section 3, Chapter 4, GO TO ADJUSTMENTS MENU).
2.: Install Factory (see opposite this page) on how to reset all of the Standard & Feature Adjustments back
to the Factory Default Settings.
For example, if you want a 5-BALL Game set to EXTRA EASY: Select and activate the "5BAL" Icon first (which
will typically change any Feature Difficulty Adjustments to HARD), then select & activate the "X.EZ" Icon to
change back the Difficulty Adjustments to EXTRA EASY. However, if the "X.EZ" Icon was selected & activated
first, then the "5BAL" Icon was selected & activated, the game will be set to a 5-BALL Game set to HARD.
:$51,1*
6HOHFWLRQDFWLYDWLRQRIWKH
,QVWDOO)DFWRU\,FRQZLOO
FKDQJHDOO$GMXVWPHQWV
,QVWDOOVWRWKH)DFWRU\'HIDXOW
*272, 167$//60(18
After entering Portals• , the MAIN MENU now appears. Select the "INST" Icon in the MAIN MENU with
either the Red "LEFT" or Green "RIGHT" Buttons (the Flipper Buttons operates in the same manner)
and press the Black "ENTER" Button (the Start Button operates in the same manner). The INSTALLS
MENU appears. Continue through this chapter for the explanation & usage of the Icons in the INSTALLS MENU.
View Pages 49 & 50 for an Overview of the Standard & Feature Adjustment(s) which have changed upon selection.
,QVWD OO ([W UD (DV\(D V\
1RU P DO +DU GRU([ WU D+D UG
To initiate, from the INSTALLS MENU, select the "X.EZ,"
"EASY," "FACT," "HARD," or "X.HD" Icons with either the Red
"LEFT" or Green "RIGHT" Buttons and press the Black "ENTER" Button. Game Play Difficulty is set to
EXTRA EASY. "REQUEST INSTALLED" is indicated and returns to the INSTALLS MENU with the previously
selected Icon flashing.
*R7R
,QVWDOOV0HQX
6HFWLRQ&KDSWHU
3DJH
6HF*R7R,QVWDOOV
Multiple Installs can be set to vary game play; however, for Installs that have one or more Adjustments in
common, the last "Install" selected & activated, will supersede any previously changed Adjustment(s) from any
prior Installs. Any adjustments which you changed and are not affected by the Install will remain as set.
View Pages 49 & 50 for an Overview of the Standard & Feature Adjustment(s) which have changed upon selection.
, QVW DO O'L UHF WRU V&X W
To initiate, from the INSTALLS MENU, select the "DCUT" Icon with either the Red "LEFT" or Green
"RIGHT" Buttons and press the Black "ENTER" Button. Game Play Type is set to programmers
choice. "REQUEST INSTALLED" is indicated and returns to the INSTALLS MENU with the "DCUT" Icon
flashing.
,QVWD OO % DO OR U % DO O
To initiate, from the INSTALLS MENU, select the "3BAL" or "5BAL" Icon with either the Red
"LEFT" or Green "RIGHT" Buttons and press the Black "ENTER" Button. Game Play
Type is set to 3- or 5-BALL PLAY. "REQUEST INSTALLED" is indicated and returns to the
INSTALLS MENU with the previously selected Icon flashing.
&R PSH WL WL R QD ND,) 3$ To initiate, from the INSTALLS MENU, select the "PAY" Icon with either the Red "LEFT" or Green
"RIGHT" Buttons and press the Black "ENTER" Button. Game Play Type is set to TOURNAMENT
PAY MODE. "REQUEST INSTALLED" is indicated and returns to the INSTALLS MENU with the "PAY"
Icon flashing.
)UHH3OD \& RPSHW LW LRQD ND (;32R U 3$3$
To initiate, from the INSTALLS MENU, select the "FREE" Icon with either the Red "LEFT" or Green
"RIGHT" Buttons and press the Black "ENTER" Button. Game Play Type is set to TOURNAMENT
FREE MODE. "REQUEST INSTALLED" is indicated and returns to the INSTALLS MENU with the
"FREE" Icon flashing.
6HF*R7R,QVWDOOV
, QVW DO O+RPH3 OD \
To initiate, from the INSTALLS MENU, select the "HOME" Icon with either the Red "LEFT" or Green
"RIGHT" Buttons and press the Black "ENTER" Button. Game Play Type is set to NORMAL HOME
PLAY. "REQUEST INSTALLED" is indicated and returns to the INSTALLS MENU with the "HOME" Icon
flashing.
) LO P6WD U5HVHW
To initiate, from the INSTALLS MENU, select the "STAR" Icon with either the Red "LEFT" or Green
"RIGHT" Buttons and press the Black "ENTER" Button. Game Play Type is set to EASY HOME
PLAY. "REQUEST INSTALLED" is indicated and returns to the INSTALLS MENU with the "STAR" Icon
flashing.
, QVW DO O1 RYHO W\
This setting is recommended where local laws restrict certain game features.
To initiate, from the INSTALLS MENU, select the "NOV" Icon with either the Red "LEFT" or Green
"RIGHT" Buttons and press the Black "ENTER" Button. Game Play Type is set to RESTRICTED PLAY.
"REQUEST INSTALLED" is indicated and returns to the INSTALLS MENU with the "NOV"
Icon flashing.
,QVWD OO $GG $ % DO O
This setting is recommended where local laws restrict certain game features.
To initiate, from the INSTALLS MENU, select the "A.A.B" Icon with either the Red "LEFT" or Green
"RIGHT" Buttons and press the Black "ENTER" Button. Game Play Type is set to RESTRICTED PLAY.
"REQUEST INSTALLED" is indicated and returns to the INSTALLS MENU with the "A.A.B" Icon flashing.
, QVW DO O)D FW RU \ 21/<D IIHFW VDO O$GMX VWPHQWV,QVWD OO V
To initiate, from the INSTALLS MENU, select the "FACT" Icon with either the Red "LEFT" or Green
"RIGHT" Buttons and press the Black "ENTER" Button.
All Standard & Feature Adjustments
which were changed in the INSTALLS or ADJUSTMENTS MENU are returned to the Factory Defaults.
020603
6HFWLRQ&KDSWHU
3DJH
*R7R
,QVWDOOV0HQX
2YHUYLHZRI6WDQGDUG$GMXVWPHQW&KDQJHVXSRQVHOHFWLRQRIDQ,QVWDOO
21/< 7+( 67$1'$5'
$'-8670(176 /,67('
$5( $))(&7(' $6 127('
,1 7+( 7$%/(6 %(/2:
1U
67$1'$5'
10
14
38
EXTRA BALL PERCENTAGE
BALLS PER GAME
FREEZE TIME
$'-8670(17 1$0(
,167$//
(;75$
($6<
,167$//
($6<
,167$//
1250$/
,167$//
+$5'
,167$//
(;75$
+$5'
30%
25%
20%
15%
10%
0:12
0:10
0:08
OFF
OFF
&203(
7,7,21 *
)5((
3/$<
&203 *
,167$//
+20(
3/$<
),/0
67$5
5(6(7
,167$//
129(/7<
,167$//
',5(&7256
&87
,167$//
%$//
,167$//
%$//
20%
03
0:08
10%
05
AUTO
21/< 7+( 67$1'$5'
$'-8670(176 /,67('
$5( $))(&7(' $6 127('
,1 7+( 7$%/(6 %(/2:
67$1'$5'
$'-8670(17 1$0(
,167$//
$''$
%$//
,167$//
)$&725<
01
NONE
CAUTION! :
REPLAY TYPE
Upon selection of
EX. BALL
03
REPLAY AWARD
Install Factory
NONE
04
REPLAY LEVELS
( "FACT" Icon ), all
POINTS
EX. BALL
06
SPECIAL AWARD
Standard & Feature
NO FREE.. NO FREE.. Adjustments which
08
FREE GAME LIMIT
were changed in the
NO EXTRA...
09
09
EXTRA BALL LIMIT
INSTALLS or
20%
20%
10 EXTRA BALL PERCENTAGE
ADJUSTMENTS
USA 3
11
MENU are returned to
GAME PRICING
the Factory Defaults
10%
OFF
OFF
13
MATCH PERCENTAGE
(see the Adjustment
02
02
15
TILT WARNINGS
Tables on Page 38 for
00
00
18 GRAND CHAMPION AWARDS
details).
19
00
00
HIGH SCORE #1 AWARDS
00
00
20
HIGH SCORE #2 AWARDS
00
00
21
HIGH SCORE #3 AWARDS
00
00
22
HIGH SCORE #4 AWARDS
25,000,000
23 GRAND CHAMPION SCORE
20,000,000
24
DEFAULT HIGH SCORE #1
15,000,000
25
DEFAULT HIGH SCORE #2
26
10,000,000
DEFAULT HIGH SCORE #3
* If Competition
5,000,000
27
DEFAULT HIGH SCORE #4
Mode was set, it is
NO
YES
YES
YES
30
FREE PLAY
suggested to Install
NO
NO
35
Factory to restore all
GAME RESTART
Adjustments to the
0:10
38
FREEZE TIME
Factory Defaults.
( YES ) **
42 COINDOOR BALL SAVER ** ( YES ) **
Then recustomize, if
YES ***
YES ***
43
COMPETITION MODE ***
desired.
** Adjustment 42 Default will not change; Installing $ .50 or Free Play Competition will override this Adjustment regardless of the setting.
*** If Adjustment 43 is changed back to NO after this Install, the Competition Mode Install will be canceled (turned off).
2YHUYLHZRI)HDWXUH$GMXVWPHQW&KDQJHVXSRQVHOHFWLRQRIDQ,QVWDOO
21/< 7+( )($785(
$'-8670(176 /,67('
$5( $))(&7(' $6 127('
,1 7+( 7$%/(6 %(/2:
1U
01
02
03
04
05
06
07
08
09
10
)($785(
$'-8670(17 1$0(
,167$//
(;75$
($6<
,167$//
($6<
EASY
EASY
BLUE SUEDE DIFFICULTY
EASY
EASY
HOUND DOG DIFFICULTY
EX. EASY
EX. EASY
HOTEL DIFFICULTY
EASY
ALL SHOOK UP DIFFICULTY EX. EASY
EX. EASY
EASY
JAILHOUSE LOCK DIFF.
02
02
JHR 1ST 3-BALL
EX. EASY
EASY
NOTE DIFFICULTY
EX. EASY
EASY
SPOT NOTE DIFFICULTY
EX. EASY
EASY
SCREAMING FANS DIFF.
MODERATE MODERATE
GIFT DIFFICULTY
,167$//
1250$/
)$&725<
MODERATE
MODERATE
EX. EASY
EASY
EASY
02
MODERATE
EASY
MODERATE
MODERATE
,167$//
+$5'
,167$//
(;75$
+$5'
,167$//
',5(&7256
&87
,167$//
%$//
,167$//
%$//
MODERATE
HARD
MODERATE MODERATE MODERATE
HARD
HARD
MODERATE MODERATE MODERATE
EASY
MODERATE
EASY
EX. EASY
EASY
MODERATE
HARD
EASY
EASY
MODERATE
EASY
MODERATE
EASY
EASY
EASY
01
01
01
02
01
HARD
EX. HARD MODERATE MODERATE
HARD
MODERATE
HARD
EASY
EASY
MODERATE
HARD
EX. HARD MODERATE MODERATE
HARD
MODERATE
HARD
MODERATE MODERATE MODERATE
Overview of Feature Adjustment Changes (this table) ... continued on the next page.
*R7R
,QVWDOOV0HQX
6HFWLRQ&KDSWHU
3DJH
6HF*R7R,QVWDOOV
1U
2YHUYLHZRI)HDWXUH$GMXVWPHQW&KDQJHVXSRQVHOHFWLRQRIDQ,QVWDOO&RQWLQXHG
21/< 7+( )($785(
$'-8670(176 /,67('
$5( $))(&7(' $6 127('
,1 7+( 7$%/(6 %(/2:
1U
11
13
14
15
)($785(
$'-8670(17 1$0(
MAGNET DIFFICULTY
SPOT ASU ON BALL
TCB MEMORY
KING MEMORY
,167$//
(;75$
($6<
,167$//
($6<
,167$//
1250$/
)$&725<
,167$//
+$5'
,167$//
(;75$
+$5'
,167$//
',5(&7256
&87
,167$//
%$//
,167$//
%$//
EASY
01
YES
YES
MODERATE
01
YES
YES
HARD
02
YES
YES
HARD
03
NO
YES
HARD
OFF
NO
NO
HARD
OFF
YES
YES
HARD
02
YES
YES
HARD
OFF
YES
YES
&203(
7,7,21 *
)5((
3/$<
&203 *
,167$//
+20(
3/$<
),/0
67$5
5(6(7
,167$//
129(/7<
,167$//
$''$
%$//
,167$//
)$&725<
21/< 7+( )($785(
$'-8670(176 /,67('
$5( $))(&7(' $6 127('
,1 7+( 7$%/(6 %(/2:
1U
6HF*R7R,QVWDOOV
01
02
03
04
05
06
07
08
09
10
11
13
14
15
)($785(
$'-8670(17 1$0(
BLUE SUEDE DIFFICULTY
HOUND DOG DIFFICULTY
HOTEL DIFFICULTY
ALL SHOOK UP DIFFICULTY
JAILHOUSE LOCK DIFF.
FIRST 3-BALL JAILHOUSE
NOTE DIFFICULTY
SPOT NOTE DIFFICULTY
SCREAMING FANS DIFF.
GIFT DIFFICULTY
MAGNET DIFFICULTY
SPOT ASU ON BALL
TCB MEMORY
KING MEMORY
EASY
EASY
EX. EASY
EX. EASY
EX. EASY
02
EX. EASY
EX. EASY
EX. EASY
MODERATE
EASY
01
YES
YES
CAUTION! :
Upon selection of
Install Factory
( "FACT" Icon ), all
Standard & Feature
Adjustments which
were changed in the
INSTALLS or
ADJUSTMENTS
MENU are returned to
the Factory Defaults
(see the Adjustment
Tables on Page 38 for
details).
)RUKRZWR5(6(7$XGLWVDOVRFDQ5(6(7+LJK6FRUHV&UHGLWVRU5HVHW$OO
$GMXVWPHQWVVHH6HFWLRQ&KDSWHU*2725(6(70(18
6HOHFW DQ\ 5HVHW
6HFWLRQ&KDSWHU
3DJH
5HVHW DOO $XGLWV $GMXVWPHQWV ,QVWDOOV
*R7R
,QVWDOOV0HQX
6HFWLRQ & KD SW H U R I *R 7R 5HV H W0HQX
2YHU YL HZ
The Portals• Service Menu System provides five (5) functions to reset Coin & Game Audits, High Scores,
Credits or to reset ALL AUDITS, ADJUSTMENTS & INSTALLS back to the Factory Default Settings.
Important: The Coin Door must be OPEN allowing the Memory Protect Switch
to be disabled, so any Reset changes can be made.
:$51,1*
$VVRRQDVDQ\5HVHW,FRQLV
VHOHFWHGDFWLYDWHGWKH
LQIRUPDWLRQDVVRFLDWHGZLWK
WKH5HVHW,FRQLVORVW
After entering Portals• , the MAIN MENU now appears. Select the "RESET" Icon in the MAIN MENU
with either the Red "LEFT" or Green "RIGHT" Buttons (the Flipper Buttons operates in the same
manner) and press the Black "ENTER" Button (the Start Button operates in the same manner). The
RESET MENU appears. Continue below for the explanation & usage of the Icons in the RESET MENU.
5HVHW &RL Q$ XGL WV
To initiate, from the RESET MENU, select the "COIN" Icon with either the Red or Green Buttons and
press the Black Button.
ONLY the Coin Audits (05-13) will be reset to zero (0), Factory Default
Settings. "REQUEST INSTALLED" is indicated and returns to the RESET MENU with the "COIN" Icon
flashing.
5HVHW *DPH$XGL WV
To initiate, from the RESET MENU, select the "AUD" Icon with either the Red or Green Buttons and
press the Black Button.
ONLY the Game Audits (01-04) & Standard Audits (01-67) will be reset to
zero (0), Factory Default Settings. Note: Coin Audits (05-13) & Software Meter Audit (14) will not be
reset. "REQUEST INSTALLED" is indicated and returns to the RESET MENU with the "AUD" Icon flashing.
5HVHW +LJK6FRU HV
To initiate, from the RESET MENU, select the "HSTD" Icon with either the Red or Green Buttons and
press the Black Button.
ONLY the High Scores will be reset to the current values. Note: If these
five (5) adjustments were not personally changed by you, the Factory Default Settings will be used (see
Section 3, Chapter 4, GO TO ADJUSTMENTS MENU, Standard Adjustments 18-22). "REQUEST
INSTALLED" is indicated and returns to the RESET MENU with the "HSTD" Icon flashing.
5HVHW &U HGLW V
To initiate, from the RESET MENU, select the "CRED" Icon with either the Red or Green Buttons and
press the Black Button.
All Credits will be reset to zero (0), Factory Default Settings. "REQUEST
INSTALLED" is indicated and returns to the RESET MENU with the "CRED" Icon flashing.
)D FW RU \ 5HVHW
To initiate, from the RESET MENU, select the "FACT" Icon with either the Red or Green Buttons and
press the Black Button.
All Audits (except for Audit 14, Software Meter), all Adjustments and
Installs will be reset to the Factory Default Settings. Note: To RESET ONLY the ADJUSTMENTS &
INSTALLS (leaving all the Audits alone), see Section 3, Chapter 5, GO TO INSTALLS MENU, Install Factory.
"REQUEST INSTALLED" is indicated and the Service Menu is exited, returning to the Attract Mode.
*R7R
5HVHW0HQX
6HFWLRQ&KDSWHU
3DJH
6HF*R7R5HVHW
*2725(6(70(1 8
([ DPSOH
After entering Portals• , the MAIN MENU now appears. Use the Red "LEFT" or Green "RIGHT" Buttons to
select the "RESET" Icon (GO TO RESET MENU).
Press the Black "ENTER" Button to activate this ICON. The RESET MENU now appears with the "COIN"
Icon (RESET COIN AUDITS) flashing:
6HF*R7R5HVHW
From the RESET MENU, select any of the Icons ("COIN", "AUD", "HSTD", "CRED") with either the Red or Green
Buttons and press the Black Button to activate the ICON chosen. After the ICON is selected & activated,
"REQUEST INSTALLED" is indicated and is returned to the RESET MENU with the previously selected Icon
flashing.
Important:
AT THIS TIME, DO NOT PRESS THE START BUTTON OR BLACK BUTTON
AFTER SELECTING ANY OF THE FIVE (5) ICONS UNLESS THIS IS WHAT IS
DESIRED. THE INFORMATION ASSOCIATED WITH THE RESET ICON WILL
BE LOST! PLEASE READ THE PREVIOUS PAGE FOR EXACTLY WHAT WILL
HAPPEN IF ANY OF THESE FIVE (5) ICONS ARE SELECTED & ACTIVATED.
Before performing any RESET, write down your last Audit Totals (see Section 3, Chapter 3, GO TO AUDITS
MENU) and any personalized Adjustment changes you may have made (see Section 3, Chapter 4, GO TO
ADJUSTMENTS MENU).
If the "FACT" Icon is select and activated, "REQUEST INSTALLED" is indicated and the Service Menu is exited,
returning to the Attract Mode. See the previous page for explanation & usage of the Icons in the RESET MENU.
6HFWLRQ&KDSWHU
3DJH
*R7R
5HVHW0HQX
6HFWLRQ & KD SW H U R I [[[[[[[[[*R7R7RXUQDPHQW0HQX
2Y HU YLHZ
•
Game code may get upgraded during production;
compare all Tournament Adjustments & Audits in the
display with the manual and make any corrections to the
Tournament Adjustments and/or Audits Tables (next
page), as necessary. Tournament Adjustments & Audits
are subject to change (with or without notice). To view
Tournament Adjustments & Audits in the display, enter
the Portals• Service Menu System. When any change
is made and then the next / previous item is selected (or
the Sub-Menu is exited), the display will momentarily
flash REQUEST INSTALLED. For details on Earnings,
Standard & Feature Audits, see Section 3, Chapter 3,
GO TO AUDITS MENU. For details on Standard &
Feature Adjustments, see Section 3, Chapter 4, GO
TO ADJUSTMENTS MENU.
Tournament Operation Note:
The use of the Tournament Equipment and/or
running a Tournament is OPTIONAL and to be
used solely in the discretion of the owner.
It is the sole responsibility of the operator to
ensure that this product is used in conformity
with all applicable laws. Stern Pinball, Inc.®
disclaims any such responsibility.
Due to continuing product innovation,
information in this chapter is
subject to change without notice.
For more details on the equipment & hardware required,
installation and set-up, read the ToPS• Tournament
Pinball System Kit Installation Manual (SPI Part
Number: 780-6011-01) provided in the Optional
Tournament Kit* (SPI Part Number: 502-5011-00). *Not included with this ToPS • Ready Pinball Game.
The equipment & hardware consists of:
Electronic 7 X 80 Multi-Color Dot Display (secured above the Backbox), Tournament Serial Interface (TSI)
Board (secured in the Backbox), Tournament Button + Lamp (secured onto the Front Molding) and all
necessary wiring, hardware and documentation (which also provides suggestions and Tips for ToPS • ).
To order, contact your local Distributor (view Pages DR. _ & ` in the Find-It-In-Front: Dr. Pinball). You can also
call Technical Support or visit our website (details on the back cover of this manual).
Important: The Coin Door must be OPEN allowing the Memory Protect Switch
to be disabled, so any Tournament changes can be made.
*27272851 $0(1 7 0(18 237, 21 $/86(21/<
After entering Portals• , the MAIN MENU now appears. Select the "TOUR" Icon in the MAIN MENU with
either the Red "LEFT" or Green "RIGHT" Buttons (the Flipper Buttons operates in the same manner)
and press the Black "ENTER" Button (the Start Button operates in the same manner). The
TOURNAMENT MENU appears. Continue through this chapter for the explanation & usage of the Icons in the
TOURNAMENT MENU.
Tournament Adjustment & Audit Tables on the next page.
*R7R
7RXUQDPHQW0HQX
6HFWLRQ&KDSWHU
3DJH
6HF7RXUQDPHQW
The Portals Service Menu System provides 6 Steps
necessary to SET-UP, START, MONITOR and END
Pinball Tournaments on your Tournament Pinball System
Ready Pinball Game. OPTIONAL EQUIPMENT &
HARDWARE (SOLD SEPARATELY) ARE REQUIRED
FOR PROPER OPERATION AND USE OF THIS MENU.
72851$0(17
$'-8670(17
7$%/(6
72851$0(17$'- 8670(176 1U
$'-8670(17 1$0(
01
CREDITS PER PLAY
JACKPOT BASE
JACKPOT INCREMENT
JACKPOT MAX.
CURRENT DATE/TIME
START DATE
END DATE
02
03
04
05
06
07
86$
'()$8/7
<285
6(77,1*
$'-8670(17 1$0(
# OF PRIZES
AWARD TYPE
SHOW PLAYER’S CASH
TOURNAMENT TYPE
BUMP N’ WIN BASE
BALLS PER TOURNAMENT
02
08
$20.00
09
$00.50
10
$2,500.00
86$
'()$8/7
1U
11
JAN. 01, 2004 12:00:00 AM
12
FEB. 01, 2004 12:00:00 AM
13
<285
6(77,1*
03
CASH
YES
BUMP N’ WIN
"varies"
03
MARCH 01, 2004 12:00:00 AM
Note: The above adjustments must be set just before selecting and activating the "STRT" Icon (START TOURNAMENT).
See the following pages for explanation and more details.
6,*10(66$*(6$%$'-8670(176 6HF7RXUQDPHQW
1U
$'-8670(17 1$0(
86$
'()$8/7
14
LOCATION MESSAGE
ON
<285
6(77,1*
1U
$'-8670(17 1$0(
86$
'()$8/7
15
PRIZE MESSAGE
ON
<285
6(77,1*
STARTING METER Reading :
STARTING METER Date (MM/DD/YR) :
AUDITOR’S NAME :
CURRENT METER Reading :
AUDIT Date (MM/DD/YR) :
CPU Version :
CURRENT VOLUME SETTING:
...... ......
......... ..
DISPLAY Version :
...... ......
........
GAME LOCATION NAME :
___________________________________________________________________________________________
___________________________________________________________________________________________
___________________________________________________________________________________________
___________________________________________________________________________________________
TOURNAMENT START DATE :
See Adj. 06 & 07 above >>
TOURNAMENT END DATE :
............
72851$0(17$8',77$%/(
72851$0(17$8',76
$XGLW GHILQLWLRQV IROORZ LQ WKLV &KDSWHU
01
02
03
04
05
TOTAL
PLAYS
TOURNAMENT
PLAYS
TOTAL
QUALIFYING PLAYS
TOTAL
GAME EARNINGS
TOTAL
TOUR. EARNINGS
6HFWLRQ&KDSWHU
3DJH
13
ACCUM.
EARNINGS
ACCUM.
TOUR EARNINGS
ACCUM.
JACKPOT
14
# TOURNAMENTS
06
JACKPOT
11
07
NET
EARNINGS
ACCUM. TOTAL
PLAYS
ACCUM.
TOUR. PLAYS
ACCUM.
QUALIFYING PLAYS
12
08
09
10
*R7R
7RXUQDPHQW0HQX
7R XU QD P HQW$GMXVW P HQW V To initiate, from the TOURNAMENT MENU, select the "SET UP" Icon with either the Red "LEFT" or
Green "RIGHT" Buttons and press the Black "ENTER" Button. Select and activate either of the ">>"
Mini-Icons to view the next or previous Tournament Adjustment in this group. Select and activate either of
the "-" or "+" Mini-Icons to change the setting, if desired (the Default Setting is noted in the definitions below). The
display will describe the Tournament Adjustment Number, Tournament Adjustment Name and the Current
Tournament Adjustment Setting. The current Tournament Adjustment will remain in the display until the next
Tournament Adjustment is viewed or when this Menu is exited.
Note on Tournament Adjustments 5, 6 & 7: *Requires the TIMEKEEPER IC (included in the kit) installed
in Location U212 on the CPU/Snd. Board. How to change the CURRENT DATE/TIME, START DATE & END
DATE: Upon entering the menu, the ">>" Mini-Icon and the Month is flashing. Use the "+" or "-" Mini-Icon to
change the month. Select the ">>" Mini-Icon again, now the day can be changed. Continue this until all is set to
your liking. After the CURRENT DATE/TIME (T. Adj. 05) and the START & END DATE/TIME (T. Adj. 06/07) are set,
the "STRT" Icon must be activated, in order for the Tournament to start and end automatically. In the event you
have to End a Tournament before your designated date/time or you do not have the TIMEKEEPER IC installed
go back to the TOURNAMENT MENU and select the "END" Icon (see the next page) to stop the Tournament.
IMPORTANT FOR TOURNAMENT USERS: Select the settings carefully. Before allowing players to begin after
you’ve started a Tournament, double-check the Normal Mono-Color Dot Display and Top Multi-Color Dot (Beta
Brite®) Display to ensure everything you want is displayed correctly. Once a Tournament is started, no
adjustments can be made until you end the Tournament (by selecting the "END" Icon). Allowing players to qualify,
then ending a Tournament prematurely to make corrections will affect the outcome of the Tournament.
WARNING: Changes made in any Adjustments will be lost after a FACTORY RESET or removal of the CPU/Sound Board Batteries.
01
02
03
04
05
06
07
08
09
10
11
Score Range and
Default varies from
title to title.
12
13
72851$0(17 $'-8670(17 1$0( 'HILQLWLRQ
CREDITS PER PLAY : Set between 01 - 10. Default is 02. Set the maximum number of Credits that may
be accumulated per game.
JACKPOT BASE : Set between $00.00 - $999,999.00 (increments of $1). Default is $20.00. Set the initial
Prize Pool Amount to be offered for the Tournament. Note: The displays will present the words "PRIZE
POOL" in lieu of the word "JACKPOT".
JACKPOT INCREMENT : Set between $00.00 - $999,999.99 (increments of 1¢). Default is $00.50. Set
the Prize Pool Increment which will increase the Prize Pool Amount with each Tournament Game played.
JACKPOT MAX. : Set between $00.00 - $999,999.00 (increments of $1). Default is $2,500.00. Set the
maximum cap to be placed on the Prize Pool during a Tournament. Note: The displays will present the
words "PRIZE POOL" in lieu of "JACKPOT".
CURRENT DATE/TIME : Set the current MONTH, DAY, YEAR, HOUR (AM/PM), MINUTE and SECOND.
Default is JAN. 01, 2004 12:00:00 AM.
START DATE : Set the desired MONTH, DAY, YEAR, HOUR (AM/PM), MINUTE and SECOND. Default is
FEB. 01, 2004 12:00:00 AM.
END DATE : Set the desired MONTH, DAY, YEAR, HOUR (AM/PM), MINUTE and SECOND. Default is
MARCH 01, 2004 12:00:00 AM.
# OF PRIZES : Set between 01 - 05 (If Tournament Adj. 11 is set to REGULAR) or 02 - 05 (If Tournament
Adj. 11 is set to BUMP N’ WIN). Default (for either) is 04. Set the max. number of Prize Positions to be
awarded during a Tournament. Selections are as follows (percentage distribution cannot be changed):
If below Tournament Adj. 11 is set to REGULAR :
......If Trn. Adj. 11 is set to BUMP N’ WIN (Default) :
Set to 01 1 Winner
Set to 02 2 Winners
Set to 03 3 Winners
Set to 04 4 Winners
Set to 05 5 Winners
100% (1) Prize Pool
65% (1) 35% (2)
50% (1) 30% (2) 20% (3)
50% (1) 25% (2) 15% (3) 10% (4)
50% (1) 20% (2) 15% (3) 10% (4) 5% (5)
Cannot set to 01. Minimum of 2 winners required.
Set to 02 2 Winners 65% (1) 35% (2)
Set to 03 3 Winners 50% (1) 25% (2) 25% (3)
Set to 04 4 Winners 40% (1) 20% (2) 20% (3) 20% (4)
Set to 05 5 Winners 40% (1) 15% (2) 15% (3) 15% (4) 15% (5)
AWARD TYPE : Set to CASH, POINTS, TICKET, NONE or PRIZE. Default is CASH.
This adjustment determines how the Prize Pool is to be represented
in the Attract Mode on both the Normal and top Beta-Brite® Displays.
Select CASH for the displays to represent the Prize Pool amount (based on Jackpot Base and Max.) in
$Dollars. Select POINTS for the displays to represent the Prize Pool amount in Points. Select TICKET for
the display to represent the Prize Pool amount in Tickets. Select NONE NOT TO represent the Prize Pool
amount (if prize(s) to be awarded are not Cash, Points or Tickets). Select PRIZE, if applicable.
SHOW PLAYER’S CASH : Set to YES or NO. Default is YES. When set to YES, the >>> previous <<<
Tournament Winners & Cash amount will show in the Attract Mode on both Dot Displays.
TOURNAMENT TYPE : Set to REGULAR or BUMP N’ WIN. Default is BUMP N’ WIN.
BUMP N’ WIN BASE : Set between X,000,000 - XX,000,000 (increments of 1M). Default is *varies*. Set
the desired Bump N’ Win Tournament base score. Tournament Adj. 11 must be set to BUMP N’ WIN.
BALLS PER TOURNAMENT : This adjustments only affects TOURNAMENT GAMES. Set between 02 09. Default is 03. Set the max. number of balls per game.
*R7R
7RXUQDPHQW0HQX
6HFWLRQ&KDSWHU
3DJH
6HF7RXUQDPHQW
1U
6W DU W7RXU QD P H Q W V H O H F W R Q O \ D I W H U 6 H W 8 S L V F R P S O H W H G To initiate, from the TOURNAMENT MENU, select the "STRT" Icon with either the Red "LEFT" or Green
"RIGHT" Buttons and press the Black "ENTER" Button. The "START TOURNAMENT?" MENU
appears with the "NO" Mini-Icon flashing.
If Set-Up (Tournament Adjustments) was not
completed OR the Tournament Audits were not
recorded from the prior Tournament, exit this Menu
by activating the "NO" Mini-Icon. If Set-Up was
completed and the Tournament Audits were
recorded, select and activate the "YES" Mini-Icon.
The Pinball Game is set to Tournament Ready
Mode (the Flashing Tournament Button must be depressed for a Tournament Game after the proper credit is
inserted). "REQUEST INSTALLED" is indicated and returns to the TOURNAMENT MENU with the "STRT" Icon
flashing. Note: If the "STRT" Icon appears to be non-functioning, it is because a Tournament is in progress. The
Tournament must first be stopped (select and activate the "END" Icon in the TOURNAMENT MENU).
6 W R S 7R X U QD P H QW V H O H F W L I Q R 7 , 0 ( . ( ( 3 ( 5 L V L Q V W D O O H G 6HF7RXUQDPHQW
* If Timekeeper is NOT installed or you have to end the Tournament prematurely, use this Icon to end it.
To initiate, from the TOURNAMENT MENU, select the "END" Icon with either the Red "LEFT" or Green
"RIGHT" Buttons and press the Black
"ENTER" Button. The "END TOURNAMENT?"
MENU appears with the "NO" Mini-Icon flashing. If
the Tournament was not completed, exit this Menu
by activating the "NO" Mini-Icon. If the Tournament
was completed (the End Date set has passed), select
and activate the "YES" Mini-Icon. The Pinball Game is
taken out of Tournament Ready Mode (to readjust
any Tournament Adjustments, the Tournament must be "stopped"). "REQUEST INSTALLED" is indicated and
returns to the TOURNAMENT MENU with the "END" Icon flashing. Record your Tournament Audits at this
time as they will be reset (except for the "Accumulative Audits) if another Tournament is started!
7R XU QD P H Q W 3U L]HV
To initiate, from the TOURNAMENT MENU, select the "PRIZ" Icon with either the Red "LEFT" or Green
"RIGHT" Buttons and press the Black "ENTER" Button. Select and activate either of the ">>"
Mini-Icons to view the next or previous Leader in this group. The display will describe the Leader
Placement (1st, 2nd, 3rd, 4th & 5th), Leader Name, 4-Digit Pin-Code, and Prize Pool portion for the Current
and Previous Tournaments. The current Leader (and related information) will remain in the display until the next
Leader is chosen or when the Sub-Menu is exited.
7R XU QD PHQW $X GLW V
To initiate, from the TOURNAMENT MENU, select the "AUD" Icon with either the Red "LEFT" or Green
"RIGHT" Buttons and press the Black "ENTER" Button. Select and activate either of the ">>" MiniIcons to view the next or previous Tournament Audit in this group. The display will describe the Tournament Audit Number, Tournament Audit Name and the Current Tournament Audit Total (Value). The current
Tournament Audit will remain in the display until the next Tournament Audit is viewed or when this Menu is exited.
IMPORTANT FOR TOURNAMENT USERS: >>>> A L L of the Tournament Audits 01-14 are RESET O N L Y if a
Factory Reset is done (see Section 3, Chapter 6, GO TO RESET MENU). >>>> Tournament Audits 01-07 are
RESET ONLY if a new Tournament is started. >>>> Tournament Audits 07-14 are NOT RESET*, they’re
accumulative (totals accumulate since the first Tournament was played). *if no Factory Reset is done.
1U
72851$0(17 $8',7 1$0( 'HILQLWLRQ
TOTAL PLAYS : Provides the total number of Regular and Tournament Games played while a Tournament
01
is active (in progress). This total is derived by adding the below Tournament Audit 02 with Regular Plays.
TOURNAMENT PLAYS : Provides the total number of Tournament Games played while a Tournament is
02
active (in progress).
TOTAL
QUALIFYING PLAYS : Provides the total number of times a player qualified (invited to enter name).
03
TOTAL GAME EARNINGS : Provides the total Gross Earnings accepted, while a Tournament is active (in
progress).
05 TOTAL TOUR. EARNINGS : Provides the total Tournament Earnings (Audit 04 less Regular Game
Earnings) while a Tournament is active (in progress).
JACKPOT
(PRIZE POOL TOTAL) : Provides the total Prize Pool (Jackpot) Amount to be paid out while a
06
Tournament is active (in progress).
Tournament Audits 07-14 continued on the next page.
04
6HFWLRQ&KDSWHU
3DJH
*R7R
7RXUQDPHQW0HQX
7RX UQDPHQW$XGLWV&RQWLQX HG
72851$0(17 $8',7 1$0( 'HILQLWLRQ
The following Tournament Audits WILL NOT BE RESET if a new Tournament is started. ALL AUDITS can be reset if a Factory Reset is done!
07 NET EARNINGS : Provides the total Net Earnings (Gross Earnings less Prize Pool) while a Tournament is
active (in progress).
ACCUM. TOTAL PLAYS : Provides the accumulative total amount of Regular & Tournament Games played
08
since the first Tournament was played.
ACCUM.
TOUR. PLAYS : Provides the accumulative total amount of Tournament Games played since the
09
first Tournament was played.
ACCUM. QUALIFYING PLAYS : Provides the accumulative total number of times a player qualified (invited
10
to enter name).
11 ACCUM. EARNINGS : Provides the total Gross Earnings accepted, since the first Tournament was played.
12 ACCUM. TOUR EARNINGS : Provides the accumulative total Tournament Game Earnings since the first
Tournament was played.
ACCUM. JACKPOT : Provides the accumulative total of Prize Pool (Jackpot) Amounts paid out since the
13
first Tournament was played.
#
TOURNAMENTS
: Provides the number of Tournaments (not individual Tournament Games) since the
14
first Tournament was played.
To initiate, from the TOURNAMENT MENU, select the "A-B TEXT" Icon with either the Red "LEFT" or
Green "RIGHT" Buttons and press the Black "ENTER" Button. Select and activate either of the ">>"
Mini-Icons to view the next or previous Tournament Adjustment in this group. Select and activate either of
the "-" or "+" Mini-Icons to change the setting, if desired (the Default Setting is noted in the definitions below). The
display will describe the Tournament Adjustment Number, Tournament Adjustment Name and the Current
Tournament Adjustment Setting. The current Tournament Adjustment will remain in the display until the next
Tournament Adjustment is viewed or when this Menu is exited.
1U
72851$0(17 $'-8670(17 1$0( 'HILQLWLRQ
14 LOCATION MESSAGE : Set to ON, CHANGE or OFF. Default is ON.
xxWhen set to CHANGE, a new message can be set or the old one can be edited (select the "+" Mini-Icon to change settings until
"CHANGE" appears in the display, then select the ">>" Mini-Icon to access.). At the top left corner of the Display, the letter A is
indicated (blinking) in the first available position. Vary the letter(s) by operating the Left and Right Flipper Buttons (or "RED" or
"GREEN" Buttons). With the desired letter indicated, depress the Start Button to lock in the letter and advance to the next
character. Repeat this procedure until the desired message is completed in the display. Select the "<" or ">" characters to
back-space (erase) and/or to move forward in an already typed message. After completion, press the "BLACK" Button,
"REQUEST INSTALLED" is indicated and then exits this sub-menu.
PRIZE MESSAGE : Set to ON, CHANGE or OFF. Default is ON.
15
Procedure identical to Tournament Adjustment 14, Location Message.
The DEFAULT LOCATION MESSAGE is:
STERN PINBALL PROUDLY PRESENTS...
The DEFAULT PRIZE MESSAGE is:
YOU CAN BE THE NEXT BIG WINNER!
IMPORTANT FOR TOURNAMENT USERS:
2 additional messages can be added by
using the Beta Brite® Remote. More details
in the ToPS Tournament Pinball System
Kit Installation Manual (SPI Part Number:
780-6011-01) provided in the Optional
Tournament Kit (SPI Part Number:
502-5011-00).
*R7R
7RXUQDPHQW0HQX
6HFWLRQ&KDSWHU
3DJH
6HF7RXUQDPHQW
6L JQ0HVVD JHV$ %7RXU QL H$GM
Sec. 4: Parts Id. ...
Section 4, Chapter 1
Page 58
Parts Identification
& Location
Section 4
Parts Identification & Location
(The Pink Pages)
Table of Contents & Overview
Chapter 1 of 2
This section provides the Part Number and locations of
most of the components in this Pinball Machine. The
parts are arranged in 3 groups: BACKBOX, CABINET &
PLAYFIELD. Generic parts which may change as
production continues (quantity and/or size) are listed
together. Quantities greater > than "0" indicates that the
part is used in this game. Since quantity changes may
occur, an item indicating a zero quantity may be used.
Compare the item which needs to be replaced with the
drawings provided (the Posts, Sockets, Bulbs & Rubber
Rings are drawn actual size).
Backbox
Cabinet
Speaker Panel
60
61
Cabinet Continued
62
66
65
67
Plastic Posts & Spacers
70
71
P/F - Gen. Parts, (Above)
63
P/F - Gen. Parts, (Below) Plastics & Decals Kits
Playfield (Above) Cont.
Hex Spacers
Important: Read all " Take Note: " items.
Sm. Sockets & Bulbs
64
Rubber Parts
Metal Posts & Nuts
68
69
Lg. Sockets & Bulbs
72
W.B. Sockets & Bulbs
73
74
The Blue Pages
Pinball Location Maintenance Kit
Available
502-6002-84 (Standard)
This kit consists of
8 oz. Novus Wax #2 Fine (Red)
(675-0003-01),
cloth and all Rubber Rings & Bulbs
used in this Pinball Machine.
Parts Identification
& Location
Ask your distributor about the
Deluxe
Pinball Location Maintenance Kit
which includes
Flipper Rebuild Kits!
502-6003-84 (Deluxe)
Drawings for Assemblies & Ramps,
see the Blue Pages, 75-98.
75
Section 4, Chapter 1
Page 59
Sec. 4: Parts Id. ...
back to
Page 58
1RWVROGDVDQDVVHPEO\RUGHUWKHLQGLYLGXDOSDUWVDFWXDOO\UHTXLUHG
(OYLVŠ3LQEDOO%DFNER[$VVHPEO\,WHPV
‡ Item 20,
Button
Hole Plug
(Black) is
the optional
ToPS• Access Hole;
if removing
for the
Optional
ToPS• Kit,
save with
the game.
$3
$
6LGH
9LHZ:
Qty. 2
%
$3
$
$3
$
$3
$
$
$3
$
Associated
Parts (AP-)
listed in the
Parts Table on
the next page.
)URQW9LHZ
The Backglass is Not Shown in
this Front View for clarity.
$3
%
7DNH1RWH
* An asterisk ( * ) indicates item(s) are not noted in the pictorials.
† When ordering Item 3, CPU/Sound Bd., please specify the
Game Name to receive the board with the correct ROMs.
6HF3DUWV,G
1º %$&.%2; 3$57 1$0(
1
Backbox ELVIS® Screened No Parts
47< 63, 3$57 1º
1
525-5631-00-84
1º
13
Item 1 Note: Black over Gold T-Molding is installed and cannot be ordered separately.
2
PCB Metal Mounting Plate
1
535-5809-14
Item 2 is secured to Item 1 by: #8 X 1/2" SLT HWH AB (Zinc) (Qty. 13) (234-5101-00) and
#10 Washer 7/32" I.D. X .5" O.D. X 1/16" Thick (Qty. 4) (242-5003-00)
14
$3
&
$3
&
Right Side
Pivot Hinge
%$&.%2; 3$57 1$0(
Ballast Mounting Plate
Ballast CU45Z-W 1/2" Core 120v 60 Hz 13W
Ballast, EU / UK Only 5/8" Core 50/60 Hz
47< 63, 3$57 1º
1
1
535-8657-00
010-5015-00
010-5015-01
Items 13 & 14 are secured to Item 1 by: #6 X 5/8" SLT HWH AB (Zc) (Qty. 2) (234-5102-04)
#1 Roto Lock Male (on Cabinet)
1 355-5006-01
520-5300-00 15* #1 Roto Lock Female (R2-0002-02)
1 355-5006-02
16
520-5138-00 Item 16 is secured by: #10-24 X 1-3/4" CBSN (Qty. 2) (231-5022-00), #10-24 Keps Nut
520-5137-01 (Qty. 2) (240-5207-00) and #10 Washer 7/32" ID X .5" OD X 1/16" (Qty. 2) (242-5003-00)
Items 3, 4 & 5 are secured to Item 2 by: #8-32 X 3/8" HWH MS (Qty. 19) (237-5903-00)
17 Back Vent Grill 2-1/2" X 18"
1 545-5072-02
6A 3X Trans. Drvr. Bd. (UK/Special Apps.Only) 520-5068-01 Item 17 is secured by: Staple 5/16" (Qty. 24) (631-5000-00)
6B ToPS• Tournament Serial Interface (TSI) Board
520-5220-00 18 Fuse Description Decal (Generic)
1 820-6152-02
**optional** Item 6A is required for UK Games to support Auxiliary assemblies listed
1 820-6266-00
19 "CAUTION - VERY HOT" Decal
under the Coil Matrix of Q1-Q32; also used for Special Applications such as Ticket / Coin
Dispensers used in conjunction with **optional** Item 6B ToPS TSI Board.
20‡ Button Hole Plug (Blk) (Happ #52-6214-00) 1 500-6566-00
1 820-6143-00
7 Fluorescent Light Bracket Assy. Left
1 515-6545-00 21 Fuse Label (UL)
For Individual Items use : Fluorescent Light Bracket Left (535-7739-00), Lamp Holder**
Backbox Date Label
22*
1 820-5091-00
(Self-Locking) (077-5214-00) and Starter Base (with Leads)*** (077-5213-00).
Ribbon Cable, 20-Pin (4")
1 036-5000-04
23
*
8 Fluorescent Light Bracket Assy. Right 1 515-6545-01 Item 23 (20-Pin) connects the CPU/Sound Board to the I/O Power Driver Board.
For Individual Items use : Fluorescent Light Bracket Right (535-7739-01), Lamp Holder**
24* Ribbon Cable, 26-Pin (40")
1 036-5001-40
(Self-Locking) (077-5214-00) and Starter Base (with Leads)*** (077-5213-00).
3 † CPU/Snd. Bd. w/ATMEL Sound Processor
4 Display Power Supply Board
5 I/O Power Driver Board Rev. G or higher
1
1
1
** secured by: #6-32 X 5/8" PPH MS (Sems) Zinc (Qty. 1) (232-5203-00)
*** secured by: #4-40 X 1/2" PPH MS (Sems) Zinc (Qty. 2) (237-5813-00)
Items 7 & 8 are secured to Item 1 by: #10-24 X 1-1/4" Carriage Bolt Sq. Neck (Qty. 2/per)
(231-5012-00), #10-24 Keps Nut (Qty. 2/per) (240-5207-00) and 3/4" X 3" Reinforced
Strapping Tape (Qty. 1, Sold in 12" Lengths only) (626-5040-00)
9
10
11
12
Fluorescent Tube 24" (F20T9CW)
Starter - Fluorescent (FS2 Light)
Lock Mounting Plate
Lock 5/8" Barrel, 3/4"ø, 1.5" Flat Cam
1
1
1
1
Item 24 (26-Pin) connects the CPU/Sound Board to the Display Controller Board.
25* 1/4" Clamp (Double)
26* 1/2", 3/4" & 1" Clamp (Single)
2
9
040-5000-23
040-5000-XX
Items 25-26 are secured to Item 1 by: #8 X 1/2" SLT HWH AB (Zc) (Qty. 13) (234-5101-00)
for
use
(Qty. 1); for
use
(Qty. 2); for 1" use -09 (Qty. 6)
3/4"
-08
165-5061-00 -XX Note: 1/2" -06
Ground Strap (5") (by Item 12)
27*
165-5011-01
535-8128-01
355-5055-00
1
600-5006-05
Items 11-12 are secured by: #8 X 5/8" TP Torx T20 (Qty. 4) (237-5947-00)
6HFWLRQ&KDSWHU
3DJH
3DUWV,GHQWLILFDWLRQ
/RFDWLRQ
1RWVROGDVDQDVVHPEO\RUGHUWKHLQGLYLGXDOSDUWVDFWXDOO\UHTXLUHG
(OYLVŠ3LQEDOO6SHDNHU3DQHO$VV\IRUWKH%DFNER[,WHPV
DQG$VVRF3DUWV%DFNJODVV$VVHPEO\3LYRW+LQJHV/HIW5LJKW,WHPV$3$$3&
Qty. 2
Qty. 2
7DNH1RWH
)URQW9LHZ
* An asterisk ( * ) indicates
item(s) are not noted in
the pictorials.
(Broken View)
$3
%
$3
&
1. Ordering the complete
Speaker Panel Assembly,
515-6888-03 (Items 1-15)
will include all hardware.
6LGH9LHZ/DLG'RZQ
For clarity, the below drawing does not show the speaker(s).
For Securing Hardware, see the Parts Table below, under Item 6.
For Securing Hardware, see the Parts Table below, under Item 4.
For Securing Hardware, see the Parts Table below, under Item 3.
1º
1
2
63($.(5 3$1(/ 3$57 1$0(
Speaker Panel (Black Wood)
Dot Matrix Disp. Bd. Mounting Bracket
47<
1
2
63, 3$57 1º
525-5515-00
535-8368-01
1º
15
,1',9,'8$/ 3$57 1$0(
47<
Plastic Shield (Display Cover)
1
63, 3$57 1º
545-5884-00
Item 15 is secured to Item 2 by: #6 X 3/8" SLT HWH AB (Zinc) (Qty. 8) (234-5000-00)
Item 2 is secured to Item 1 by: #8 X 3/4" SLT HWH AB (Zinc) (Qty. 4/per) (234-5103-00)
3
Dot Matrix Display Board 128 X 32
1
520-5052-00 The Associated Parts AP-A thru AP-C are also noted in the Backbox
Item 3 is secured to Item 2 by (at corners): 3/16" X 3/8" Spacer Gray (Qty. 4)
(254-5000-18) and #6-32 X 1/2" HWH Swage (Serr) Zinc (Qty. 4) (237-5976-03)
Item 3 is secured to Item 4 (at the top center) by: 3/4" X 1/4" Hex Spacer #6-32 Tap
(Qty. 1) (254-5008-04) and #6-32 X 1/4" PPH MS (Sems) Zinc (Qty. 1) (232-5200-00)
4
Static Shield (Steel Plate)
1
535-6437-00
Item 4 is secured to Item 2 by: 1/2" X 1/4" Hex Spacer #6-32 Tap (Qty. 4) (254-5008-03)
and #6-32 X 1/2" PPH MS (Sems) Zinc (Qty. 2, on Left Side only) (232-5202-00)
5*
6
Edge Protector (on Item 4)
Display Controller Board FCC-FEB98
2
1
545-5592-01
520-5055-03
Item 6 is secured to Item 4 by: 1/2" X 5/16" X .144 ID Spacer Tap (Qty. 3) (254-5014-00),
#6-32 X 3/4" PPH MS (Sems) Zinc (Qty. 3) (237-5504-00), 1/2" X 1/4" Hex Spacer #6-32 Tap.
(Qty. 1) (254-5008-03) and #6-32 X 1/4" PPH MS (Sems) Zinc (Qty. 2) (232-5200-00)
7
RF Shield
1
820-5092-00
Item 7 is secured inbetween: "Item 6" and its’ mounting hardware described.
8* Ground Strap (25") (on Items 4, 6, 12)
9* 1/2" Clamp (Single) (on Item 4)
10* Ribbon Cable, 14-Pin
4
1
1
11* Foam 3/16" Thk. X 1/4" X 36"
6
600-5006-25
040-5000-06
036-5260-00
Item 10 Note: The 14-Pin cable connects the Dot Matrix Disp. Bd. to the Disp. Controller Bd.
626-5026-00
Above Item 11 is self-adhesive. Located between Items 3 & 17. Sold in 12" Lengths only.
12
13
14
Speaker (Shld.) 4" 8: MG Elec #4060SH
Speaker Grill (Black w/no Artwork)
Speaker Panel Hook Bracket
2
2
2
031-5004-01
535-8081-01
535-7009-02
Items 12, 13 & 14 are secured by: #8 X 3/4" SLT HWH AB (Zinc) (Items 12/13: Qty. 4/per;
Item 14: Qty. 2/per) (234-5103-00)
3DUWV,GHQWLILFDWLRQ
/RFDWLRQ
Assembly drawings on the previous page.
ASSOC. PARTS ARE NOT INCLUDED WITH BACKBOX/SPKR. PANEL ASSY’S.
1º
$662& %$&.%2; 3$57 1$0(
47< 63, 3$57 1ºº
1 See Parts Below
AP-A Backglass Assembly (Game Nº 84)
ORDER ONLY INDIVIDUAL PART(S) NEEDED:
AP-A1 Clear Backglass 25.906" X 19.187"
1
660-5038-02
AP-A2 ELVIS® Film Art w/Hologram (#84)
1
515-7252-84
Note: The Elvis Backglass Film Art must have the Official Elvis®
EPE© Hologram Logo affixed. It cannot be displayed without it!
AP-A3 Top Plastic Channel - 26"
1
545-5018-15
AP-A4 Bottom Plastic Lift Channel - 26-1/16" 1
545-5021-01
AP-A5 Plastic Edging (Left/Right) - 18-1/8"
2
545-5018-14
AP-A6* Tape (double-sided) (12" Length)
1
626-5005-00
(only 6" required)
Note: AP-A6 secures AP-A3--A5 to AP-A1
1 535-7999-00
AP-B Pivot Hinge Left
1 535-7999-01
AP-C Pivot Hinge Right
Items AP-B & AP-C are secured to Backbox by: 1/4"-20 X 1-1/4" C.B. Sq. Neck (Qty. 4)
(231-5003-00), 1/4"-20 Flange Nut (Qty. 4) (240-5300-00) and
Fend Washer 1/4" I.D. X 1" O.D. (Qty. 1) (242-5009-00)
Items AP-B & AP-C are secured to Cabinet by: 1/4"-20 X 7/8" Carriage Bolt Sq. Neck
(Qty. 2) (231-5014-00), Hinge Spacer (Qty. 2) (530-5099-00), Washer 1/4" I.D. X 7/8" O.D. X
1/8" Yellow (Qty. 1/per) (242-5016-01), Fend Washer 1/4" I.D. X 1" O.D. (Qty. 1/per)
(242-5009-00) and 1/4"-20 Flange Nut (Qty. 1/per) (240-5300-00)
Note: Inside cabinet holes are covered by BLACK MYLAR COVER DISCS (QTY. 2)
(820-5041-00) to hide securing hardware (AP-B & AP-C above) from player view.
6HFWLRQ&KDSWHU
3DJH
6HF3DUWV,G
5
Red
% &DELQHW*HQHUDO3DUWVJ6ZLWFKHVF
*
Green
)RU%DFNER[3DUWVVHH
Black
WKHSUHYLRXVWZRSDJHV
(QODUJHG
9LHZ RI ,WHP LQVLGH WKH &RLQ 'RRU ,WHP %XWWRQV %UDFNHW 'HFDO VROG VHSDUDWHO\
)RU XVDJH VHH 6HFWLRQ &KDSWHU 3RUWDOV
6HUYLFH 0HQX ,QWURGXFWLRQ 3DJH ‡ Item 11, Button Hole Plug
(Blk) is the Optional Tournie
Button Access Hole.
If removing for the
Optional Tournament Button,
save with
the game.
7DNH1RWH
Qty. 2
9LHZ RI WKH EDFN RI WKH &DELQHW ZLWK WKH %DFNER[ LQ WKH GRZQ SRVLWLRQ
Qty. 2
Qty. 2
,WHP LV VWDSOHG RQ WKH LQVLGH EDFN ZDOO DQG WKH LQVLGH ERWWRP RI WKH FDELQHW
'
&
,WHP - 2Q2II
6ZLWFK LV ORFDWHG
XQGHU WKH &DELQHW
)URQW 5LJKW
GLUHFWO\ EHORZ WKH
3RZHU %R[
$
%
&
Qty. 4
6HF3DUWV,G
,WHP 25'(5,1* 127(
/HJ FRPHV ZLWK /HYHOHU
/HYHOHU FDQ EH SXUFKDVHG
VHSDUDWHO\ /HJ FDQQRW EH
RUGHUHG :,7+287 /HYHOHU
6HH 7DEOH EHORZ ,WHP Qty. 2
1º
1
2
%5*
&$%,1(7 3$57 1$0(
47< 63, 3$57 1º
ELVIS Screened Cabinet (No Parts)
Black Leg with Leveler Asm.
525-5395-15P-84
4 500-5921-50
7DNH1RWH
* An asterisk ( * ) indicates item(s)
are not noted in the pictorials.
J
Legend Note: Items noted with a
black square
are General Parts.
Items noted with a white square
are Switches.
9LHZ RI WKH &RLQ
'RRU 2SHQ ,WHP 1º
10
&$%,1(7 3$57 1$0(
F
47< 63, 3$57 1º
Front Molding - Black
1
500-5757-02-00
Item 10 requires: Self-Adhesive Foam Rubber 3/8" X 3/16" X 20-3/8" (626-5001-00).
11‡ Button Hole Plug (Blk) (Happ #52-6214-00) 1 500-6566-00
12 P/F Glass (Tmprd.) 21" X 43" X 3/16" 1 660-5001-00
3 Start Button (Red) + Lamp Assembly 1 500-6388-02 13 Hex Key Allen Wrench 5/16"
1 777-0001-00
Item 3 includes the Switch. FOR SWITCH ONLY see Item 25 on the Next Page.
Corrugated Tubing Black 1"ø X 2.6’ Lg.
1 605-5008-03
14
* Diode Terminal Strip 2-Lug (810) Isolated 1 055-5203-00 Above Item 14 covers the Cables Wiring Harnesses going into the Backbox from the Cab.
Above Item is secured below button in cabinet by: #6 X 1/2" SLT HWH AB Zinc (Qty. 1)
15 #1 Roto Lock Male (R2-0055-02)
1 355-5006-01
(234-5101-02). Note: 1N4004 Diodes (112-5003-00) are used in all Diode applications.
Item 15 is secured by: #10-24 X 1-3/4" Carr. Bolt Sq. Neck (Qty. 2) (231-5022-00),
#555
Wedge
Base
Bulb
(Clear)
4*
1 165-5002-00 #10-24 Nylon Stop Nut (Qty. 2) (240-5206-00) and #10 Washer 7/32" X .5" X 1/16" (Qty. 2)
Item 2 is secured by: Leg Bolt Back Plate (535-5703-00) and Leg Bolt 3/8" X 16 X 2-1/2"
Hex 5/8" Hd. (2/per) (231-5001-01) Leg Leveler ONLY (3/8"-16 X 3") (500-5017-00).
Item 4 is included with Item 3, for just a replacement Bulb use the above number.
5
Ball Shooter (Plunger) Assembly
1
500-6146-00-07
FOR A BREAKDOWN OF PARTS SEE: Sec. 4, Chp. 2, Drawings for ... Assemblies...
6
Flipper Button (Red) Assembly
2
500-5026-32
Item 6 is secured by: Pal Nut for Flipper Button (Metal) (Qty. 2/per) (240-5003-01) and
is fitted with: O-Ring 11/32" X 7/32" X 1/16" (Qty. 1/per) (545-5850-00) Item 6 DOES NOT
include the Switch. FOR SWITCHES ONLY see Items 23A/B on the Next Page.
7
8
9
Rear Glass Channel 20-3/8" Length
Plastic Channel 42-5/8" Lg. (Left/Rt.)
Side Armor "with holes" (Left & Right)
1
2
2
545-5038-00
545-5017-00
535-7297-02
Item 9 is secured @ front by: Pem Stud 1/4 X 1" FH (Qty. 1/per) (237-6116-01) and
1/4-20 Flange Nut (Qty. 1/per) (240-5300-00); @ center by: #8 X 5/8" PPH AB Black
(Qty. 2/per) (232-5101-01); @ rear (backbox) by: #10-24 X 1" Sq. Neck Carriage Bolt Black
(Qty. 1/per) (231-5021-00) and #10-24 Hex Nut (Qty. 1/per) (240-5202-00)
(242-5003-00)
16
17
#1 Roto Lock Female (on Backbox)
Coin Door (with Validator) USA only
1
1
355-5006-02
500-5018-172
Item 17 is secured by: 1/4"-20 X 1-1/4" Carriage Bolt Sq. Neck (Qty. 4) (231-5003-00)
1/4"-20 Flange Nut (Qty. 4) (240-5300-00) and Fend Washer 1/4" I.D. X 1" O.D. (Qty. 3)
(242-5009-00) Note: For Coin Door other than USA call Technical Support for SPI Part Nº.
Coin Door Sw. (USA) (Happ Control)
18
2
180-5024-01
ALT. SWITCHES 18: Coin Door Switch (USA) (Coin Control) (180-5024-00)
18J: Coin Door Switch ( ¥ Japan) (180-5091-00)
Bracket for below Portals• Switches
1
535-6860-03
19B: Push-Button Portals• Switch (Black) (180-5192-00)
19R: Push-Button Portals• Switch (Red) (180-5192-02)
19G: Push-Button Portals• Switch (Green) (180-5192-04)
Ordering Note: Securing hardware for switches included. For Decal Kit, see Page 67.
19
SWITCHES
Parts Table & Views continue on the next page.
030703
6HFWLRQ&KDSWHU
3DJH
3DUWV,GHQWLILFDWLRQ
/RFDWLRQ
&DELQHW*HQHUDO3DUWVJ6ZLWFKHVF&RQWLQXHG
Qty. 2
$
%
9LHZ RI &DELQHW
,QVLGH )URQW /HIW
6HH 3UHYLRXV
3DJH IRU
2SHQ 9LHZ
RI &RLQ 'RRU
'
7KXPE6FUHZ LQFOXGHG
ZLWK 7LOW 3OXPE %RE RQO\
Qty. 2
&
$
6ZLWFK 'LRGH
1
63, 1ž
LQ SURWHFWLYH
WXELQJ
7DNH1RWH
J
&DELQHW%DFN/LJKWVDUHORFDWHG
RQWKH:RRG%DFN3DQHO
1º ,1',9,'8$/ 3$57 1$0(
47< 63, 3$57 1º
Parts Table & Views continue on the previous page.
20 Dual Switch Assembly
1 500-5808-00
ORDERING ABOVE (ITEM 20) ASSEMBLY PART Nº WILL INCLUDE:
20A Mounting Bracket
1
535-6958-00
20B Playfield Power Interlock Sw. (Top)
1
180-5136-00
20C Memory Protect Switch (Bottom)
1
180-5000-01
Item 20 is secured to Cabinet by: #8 X 1/2" SLT HWH AB (Zinc) (Qty. 2) (234-5101-00)
Front Molding Lockdown Assembly
1
6HH
$
6HH 7KH %OXH 3DJHV 6HFWLRQ &KDSWHU 'UDZLQJV IRU 0DMRU $VVHPEOLHV 3DJH )RU*HQHUDO%XOEV6RFNHWV
*
+
are General Parts.
Legend Note: Items noted with a black square
Items noted with a white square
are Switches.
6HH WKHVH 3LQN 3DJHV 6HFWLRQ &KDSWHU 3DUWV ,GHQWLILFDWLRQ /RFDWLRQ 3DJHV &
$
* An asterisk ( * ) indicates item(s) are not noted in the pictorials.
F
6HUYLFH *DPH 0DQXDO
6HH )URQW &RYHU IRU
63, 3DUW 1XPEHU
(QODUJHG
9LHZ
%
9LHZ RI &DELQHW
,QVLGH )URQW 5LJKW
(QODUJHG
9LHZ /HIW
%
%
6HH
$
21
.
%
(QODUJHG 9LHZ RI 3RZHU %R[ &DELQHW %RWWRP ,QVLGH )URQW 5LJKW
3LQEDOO 5HMXYHQDWLRQ .LW $YDLODEOH 6WG
7KLV NLW FRQVLVWV RI R] 1RYXV :D[ )LQH 5HG FORWK DQG DOO 5XEEHU 5LQJV %XOEV XVHG LQ WKLV 3LQEDOO 0DFKLQH
1º
29
,1',9,'8$/ 3$57 1$0(
Transformer 5.7v AC (with Ballast Winding)
47< 63, 3$57 1º
1
010-5012-01
Item 29 is secured by: 1/4"-20 X 5/8" PPH MS (Zinc) (Qty. 4) (237-5854-00) and
1/4" Split Lock Washer (Qty. 4) (244-5000-00)
30
31
Speaker 8" ø Rd. 8010 4:
Speaker Grill 7" X 7"
1
1
031-5007-00
545-5072-03
Items 30 & 31 are secured by: #6-32 X 1-1/4" Fin Shank Screw (Qty. 4) (237-5883-00) and
#6-32 Keps Nut (Qty. 4) (240-5008-00)
500-6509-00
32 Power Input Box Sub-Assy.
1 515-5360-07
ORDERING ABOVE (ITEM 32) SUB-ASSY. PART Nº WILL INCLUDE:
1
32A Power Box (Plain)
535-5932-00
1
180-5008-01
32B Service Outlet (for USA)
(connected
to
handle)
Lockdown
Spring
22
1 265-5008-00 32C Line Cord 10’ ROJ 3" Max.
1
034-5000-10
1
545-5122-00
23A Flipper Switch - Self-Cleaning (Lt. Flipper)
1 180-5160-00 32D Recessed Cup for Line Cord
1
150-5000-00
23B Flipper Sw. - X2 Stack (Lwr./Upr. Flipper(s))
1 180-5164-00 32E* Line Filter
1
Varistor TNR159211KM
150-5001-00
24* Foam Strip (For Item 23 - Noise Suppression) 1 626-5042-00 32F*
200-5000-05
32G Fuse 8 Amp 250v Slo-Blo (Domestic) 1
Start
Button
Switch
(ONLY)
25
1 180-5174-00 32H Fuse Holder
1
205-5001-00
1
535-8318-00
26 Grills 2-1/2" X 18" (on Back & Bottom)
2 545-5072-02 32I* On/Off Switch Bracket
1
On/Off Rocker Sw. (APEM R2101C5NBB)
180-5001-03
27 Cabinet Plumb Bob Tilt Switch
1 See Parts Below 32J
1
820-6123-03
32K Power Box Decal
ORDER ONLY INDIVIDUAL PART(S) NEEDED:
33 Cash Box Plastic Bottom
1 545-5090-00
27A Bracket for Hanger Wire
1
535-5221-00
34 Cash Box Cover (Validator)
1 535-5013-03
27B Hanger Wire
1
535-5319-00
27C Contact Wire Form
1
535-7563-01
1 535-7562-00
35 Cash Box Lock Bracket (wire)
27D Plumb Bob Weight (includes Thumb-Screw) 1
535-5029-00
36 Large Hair-Pin Clip
1 535-7772-00
Items 27A & 27C are secured by: #8 X 1/2" SLT HWH AB (Zinc) (Qty. 4) (234-5101-00)
Optional Meter (+12v DC w/Diode & Bracket)
G-0053-013-102
Slide
&
Pivot
Support
Bracket
Right
28A
1 535-5990-00 37* Optional Meter (+12v DC w/Diode, No Bracket)
G-0053-013-102A
1 535-5989-00
28B Slide & Pivot Support Bracket - Left
Item 21 is secured by: #10-24 X 1-1/4" Carr. Bolt (Qty. 2) (231-5012-00), #10-24 Keps Nut
(Qty. 2) (240-5207-00), #8 X 5/8" HWH AB Zinc (Qty. 4) (234-5102-04) and
#10 Washer 7/32" ID X 1/2" OD X 1/16" (Qty. 2) (242-5003-00)
Items 28A & 28B are secured by: #10-24 X 1-1/4" Carriage Bolt Sq. Neck (3/per)
(231-5012-00) and #10-24 KEPS Nut (3/per) (240-5207-00)
3DUWV,GHQWLILFDWLRQ
/RFDWLRQ
*
::: O P T I O N A L 999
Shaker Motor Kit
1
502-5027-00-84
6HFWLRQ&KDSWHU
3DJH
6HF3DUWV,G
(QODUJHG 9LHZ RI WKH
3OXPE %RE 7LOW 6ZLWFK
3OD\ILHOG*HQHUDO3DUWVJ0LVF6ZLWFKHVF6ZLWFKHVRQ$VPJ$ERYH
1º $%29( 3/$<),(/' 3$57 1$0( 47< 63, 3$57 1º
PF
P/F Screened w/ Inserts & NO Parts
P/F Complete w/ Inserts & ALL Parts
*HQHUDO,WHPV
1
1
830-5100-84
505-6004-84-84
Arch (Black Metal) no Forks
Item 1 is secured to the playfield by: #10-32 X 5/16" PH FL U/C MS STL Zinc (Qty. 2)
(237-6013-00). Usage Note: When replacing the Arch, order new replacement Nelson
Protect Strips (not included) (Qty. 2) (545-5212-02).
1
2
Instruction Card (USA) <Elvis®>
3
Coin Card (2-Sided) Yellow Stock
4
Coin Card (2-Sided) Yellow Stock
5
6
Light Reflector (Silver Color Plastic)
Mini-Mars Lite Cover (Snap-In) (see Note)
7
Bubble Level Assembly
1
535-8392-01
1
755-5184-00
1
755-5400-00-Y
1
755-5400-02-Y
3
3
545-5409-01
550-5030-02
1
500-6815-00
4
0
260-5000-00
545-5232-01
Note: Visit www.sternpinball.com for a PDF copy of the Game Instruction Card which will
also have any translated Instruction Cards made for this game. Find Game Link or Archives.
Spanish 755-5184-02; German 755-5184-03; Italian 755-5184-04; French 755-5184-05.
Usage Notes: Use Item 3 (Back: 1 Play 50¢ - 5 Plays $2) for Adj. 6, Game Pricing, USA 5
Setting, or (Front: 1 Play 50¢ - 3 Plays $1) for Adj. 6, Game Pricing, USA 8 Setting.
Usage Notes: Use Item 4 (Front: 1 Play 50¢) for Adj. 6, Game Pricing, USA 2-7 Setting,
(Back: is Blank) for Custom Settings.
Availability: See Appendix J (back of manual) for all current Coin Cards (USA, Canada,
Euro & other International). If this is a non-US Game, Coin Card(s) provided will differ.
(Note: Additional on Back Panel: -01 Clear X1, -06 Yellow X2)
For Individual Items use : Level .8mm Empire #0224 (545-6001-01) or Level Mount
(545-6068-00). Flange secured by: #6-32 X 1/4" PPH MS (no Sems) Zinc (237-5500-00)
and #6-32 Keps Nut (240-5008-00)
Item 7 is secured to the wood rail by: #6 X 1/2" HWH AB Zinc Red (Qty. 2) (234-5001-02)
8
9*
Pinball (Steel) 1" ø
Plug-Cap (3/16") Black Plastic
Note: Item 9 should plug hole if a Center Post (@ Drain) is used, then removed.
6SLQQHUV:LUH*DWHV)ODS*DWHV
10
Spinner Bracket
Spinner
1
1
535-5128-00
515-5553-00
3
3
535-7756-02
535-7755-01
1
1
1
1
1
1
1
1
1
1
535-9489-00
535-9490-00
535-9480-01
535-9481-00
535-9470-00
535-9471-00
535-5372-04
535-7721-02
535-9171-02
535-9172-00
Item 10 is secured by: #6 X 1/2" SHWH AB (Red) (Qty. 2) (234-5001-02)
For the entire assembly (includes Switch & Wiring) use: 500-5656-00-84
11
Gate Bracket
Wire Form
(sec’d onto Items 29, 32 & 33)
1º $%29( 3/$<),(/' 3$57 1$0( 47< 63, 3$57 1º
)ODW5DLOV:LUH)RUPV%DOO*XLGHV
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
13
6HF3DUWV,G
14
15
1-Way Gate Bracket
Wire Form
Rollunder Gate Bracket (for Plastic -18)
Wire Form
Ball Gate Bracket
Ball Gate Flap
Rebound Hinge
Wire Form (Right Style)
Gate Bracket (Shooter Lane) w/Hole
Wire Form
%UDFNHWVIRU0RXQWLQJ
16
Playfield Hanger Bracket
17
Arch Retaining (Hold-Down) Brackets
18
19
Bracket, Mounting (for Plastic -19)
Mntg. Brckt. (for Hex Spacers on Wood Rails)
2
535-8385-00
2
535-8394-00
2
1
535-8941-00
515-6508-00
Item 16 is secured to the P/F by: #8-32 X 7/8" HWH MS Zinc (Qty. 2/per) (237-5890-00)
Item 17 is secured to the P/F by: #8 X 1/2" SLT HWH AB (Zinc) (Qty. 3/per) (234-5101-00)
%UDFNHWVIRU%DOO6WRSV7UDSVRU3URWHFW
21
Protect Plate (under Plastic -10, same shape)
22
23
24
25
Wood Rail #1, 42"
Wood Rail #2, 23.5"
Wood Rail #3, 15.25"
Wood Rail #4, 9.25"
:RRG5DLOV
1
502-6796-84
1
502-6796-84T
626-5058-00
802-5000-84
0LVFHOODQHRXV
44
Elvis• Kit (Complete)
45
46
47
Elvis• Kit (Torso & Pivot Pin Only)
Rubber Bumper (Blue) (sec’d onto Item 36)
Kit: Decals (for Items 1 & 10)
For Individual Items use : See the Parts Table on Page 91, Items 21 and 26—31.
1
Note: Individual Decals (820-6356-XX) are not available individually, ordering of kit is
required. For all pieces, see P/F - Plastics (Screened & Clear) & Decals, Page 67.
Kit: Plastics (for Items 13 & 18)
Note: Individual Plastics (830-6029-XX) are not available individually, ordering of kit is
required. For all pieces, see P/F - Plastics (Screened & Clear) & Decals, Page 67.
48
1
803-5000-84
0LVFHOODQHRXV6ZLWFKHV
A
B
Micro Switch (sec’d onto Item 26)
Micro Switch (sec’d onto Items 11 & 13 Brkts.)
C
D
Micro Sw. (1.25") (sec’d onto Itm. 10 Spinner Brkt.)
Micro Switch (sec’d onto Item 15 Gate Brkt.)
1
4
180-5189-00
180-5087-00
1
1
180-5010-04
180-5190-28
Items A & B require a Switch Body Protect Plate (535-6539-00) & Diode 1N4004
(112-5003-00) and are secured by: #2-56 X 1/2" HWH Sr (Qty. 2/per) (237-5937-02) and
#2-56 Hex Nut (Qty. 2/per) (240-5301-00). Item A: Cable Wiring (036-5500-21-84, Sw. 48);
Item B: CW (036-5500-04-84, Sw. 26; 036-5500-06-84, Sw. 47; 036-5500-09-84, Sw. 27;
036-5500-13-84, Sw. 46); Cable Wiring each include a 2-Pin Connector, 045-5007-02.
Items C & D require a Switch Body Protect Plate (535-6539-00) & Diode 1N4004
(112-5003-00) and is secured by: #2-56 X 1/2" PPH MS ZInc (Qty. 2) (237-5806-00)
Item C: Cable Wiring (036-5500-10-84, Sw. 25); Item D: CW (036-5500-08-84, Sw. 10);
6ZLWFKHVRQ7RS$VVHPEOLHV
Note: For more views of Switches, Targets and/or PCBs used on Assemblies, see
Section 4, Chapter 2, (The Blue Pages) Drawings for Major Assemblies & Ramps.
Micro Switch (Short Flat Actuator)
Item E located on the Hound Dog Assembly on Page 88.
E
F
G
Micro Switch (Roller Actuator, Lite Force)
1" Sq. Stand-Up Target (White)
H
Micro Switch
1
180-5190-28
1
2
180-5119-02
515-5162-08
1
180-5190-28
Items F & G located on the Upper Playfield Hotel Frame on Page 93.
Item H located on the Right Steel Ramp Exit Gate on Page 95.
535-8250-05
Micro Switch (1-5/8" Actuator)
Item I located on the Right & Left Wire Ramp Exit Gates on Page 95-97.
1
535-9486-00
Item J located on the Left Steel Ramp Exit Gate on Page 96-97.
1
1
1
1
525-5007-59
525-5007-06
525-5007-63
525-5007-64
Items 22-25 are secured by: #6 X 1-1/4" PFH A (Zinc) (Qty. 14 total) (237-5804-00)
6HFWLRQ&KDSWHU
3DJH
535-9423-00
535-9442-00
535-9413-00
535-9416-00
535-9419-00
515-7367-00
535-9418-00
535-9412-00
535-9424-00
535-8393-00
535-9414-00
535-9441-00
535-9465-00
535-9415-00
550-5037-01
535-5642-00
535-5373-01
535-5373-01
2
Snubber Bracket (by Eject Holes)
Item 20 is secured to the P/F by: #8-32 X 3/4" SHWH Sw. (ZInc) Wax (Qty. 2)
(237-5975-02) and #8-32 T-Nut (Qty. 2) (240-5101-00)
20
1
1
1
1
1
1
1
1
2
1
1
1
1
1
2
2
2
1
Items 26-43 are secured at Tabs by: #8 X 1/2" SLT HWH AB (Zinc) (Qty. 1/per tab)
(234-5101-00) and/or by: #8 Washer (Qty. 1/per) (242-5005-00) and
#8-32 Nylon Stop Nut (Qty. 1/per) (240-5102-00)
Item 11 is secured Items 29, 32 & 33 by: #6-32 X 3/8" PPH MS Ext. Sems (Zinc) (Qty. 2)
(232-5201-00) and #6-32 Nylon Stop Nut (Qty. 2) (240-5005-00)
12
Flat Rail #1 (for Switch, see Item A below)
Flat Rail #2 (by Center Eject, Right Side)
Flat Rail #3 (Center Loop, Left)
Flat Rail #4 (for Switch, see Item B below)
Flat Rail #5 (Upr. Rt. Orbit, Left Side)
Flat Rail #6 (Shooter Lane, Adjustable)
Flat Rail #7 (for Switch, see Item B below)
Flat Rail #8 (for Switch, see Item B below)
Flat Rail #9 (by Lwr. Pop & Upr. Rt. Flipper)
Flat Rail #10 (by Bottom Arch Drain)
Flat Rail #11 (Left Orbit, Right Side)
Flat Rail #12 (by Center Eject, Left Side)
Flat Rail #13 (by Right Steel Ramp, Rt.)
Flat Rail #14 (for Switch, see Item D below)
Ball Guide (Plastic, Long Clear)
Wire Form (on Plastic Ball Guide)
Snubber Wire (3.125") (by Lwr. Flippers)
Ball Guide Rail .12" ø X 5.5"
I
J
Micro Switch
2
180-5010-01
1
180-5087-00
3LQEDOO 5HMXYHQDWLRQ .LW $YDLODEOH 6WG
7KLV NLW FRQVLVWV RI R] 1RYXV :D[ )LQH 5HG FORWK DQG DOO 5XEEHU 5LQJV %XOEV XVHG LQ WKLV 3LQEDOO 0DFKLQH
$VN \RXU GLVWULEXWRU DERXW WKH 'HOX[H 3LQEDOO /RF 0DLQW
.LW ZKLFK LQFOXGHV )OLSSHU 5HEXLOG .LWV
3DUWV,GHQWLILFDWLRQ
/RFDWLRQ
3)*HQ3DUWVJ0LVF6ZLWFKHVF6ZLWFKHVRQ$VPJ$ERYH&RQWLQXHG
%
%
4W\ %
,
5HG
(
&
%
,WHP -DLO
%
%UDFNHWV
(
'
,WHP RQ 3)
'
XQGHU :LUH 5DPS
5HG
5HG
a
LQVLGH 5XEEHU 5LQJ
2.
3.
%
,
1.
,
+RXVH 3ODVWLF
)
,WHP +
*
*
XQGHU
-
$ 7DNH1RWH
Items 10, 13 & 18 have associated Individual Plastics and/or
Decals. These pieces are not available individually. For the
Plastic and/or Decal Kits (or views), see the page after next,
Playfield - Plastics (Screened & Clear) & Decals, Page 67.
For Sockets & Bulbs (drawings & part numbers) see Pgs. 72-74.
are General
Legend Note: Items noted with a black square
Parts. Items noted with a white square
are Switches and/or
Misc. PC Board(s). Items noted with a blue square
are
Switches on Major Assemblies and Ramps; see The Blue Pages,
Sec. 4, Chp. 2. for parts required not appearing on this page.
If you still cannot find the part required, Call Stern® Pinball, Inc.
Technical Support, 1-800-542-5377 or 1-708-345-7700 (Opt. 1).
3DUWV,GHQWLILFDWLRQ
/RFDWLRQ
F
J
J
6HH $SSHQGL[ - DW WKH EDFN RI WKLV PDQXDO IRU DOO
FXUUHQW &DUGV 86$ &DQDGD (XUR ,QWHUQDWLRQDO
DYDLODEOH WKURXJK \RXU GLVWULEXWRU RU GRZQORDG YLD
RXU ZHEVLWH VHH EDFN RI PDQXDO FRYHU
237,21$/ )25
72851$0(17
86( 21/<
1RW ,QFOXGHG
66666666
237,21$/ )25
+20( 86( 21/<
1RW ,QFOXGHG
6HFWLRQ&KDSWHU
3DJH
6HF3DUWV,G
3OD\ILHOG*HQHUDO3DUWVJ0LVF6ZLWFKHVF6ZLWFKHVRQ$VPJ%HORZ
1º %(/2: 3/$<),(/' 3$57 1$0( 47< 63, 3$57 1º
*HQHUDO,WHPV
1
2
3
4
Insulation Fiche Paper (under Lower Flippers)
Diode Terminal Strip 2-Lug (810) Isolated
Diode Terminal Strip 4-Lug (821) Isolated
Diode Terminal Strip 7-Lug Isolated
2
1
1
1
545-5721-00
055-5203-00
055-5204-04
055-5204-07
Items 2-4 are secured by: #6 X 3/8 HWH AB Zinc (Qty. 1-2/per) (234-5000-00).
Note: 1N4004 Diodes (112-5003-00) are used in all Diode applications. 1N4001 Diodes
can be used for Switches and/or Lamps. See Sec. 5, Chp. 2, P/F Diode Terminal Strip...
5
5m
6
Eject Hole Base - Red
Eject Hole Base - Red (Modifield)
3A 250v Slo-Blo Fuse
Fuse Clip Holder (Socket)
1
1
4
4
545-5060-02
545-5060-02-84
200-5000-08
205-5000-01
&
Item 6 is secured by: #6 X 1/2" PPH AB (Qty. 1/per) (237-5805-00)
Note: Item 6, Fuse Clip Holder (Socket) 205-5000-01 is part of a set of 12 (205-5000-12).
You can order them as individuals (...-01) or a set of 12 (...-12).
7*
Diode Terminal Strip/Fuse Decals A-D
1
820-6221-84
,
1
-
Note: For Decal Descriptions & Locations, see Sec. 5, Chp. 2, Playfield Wiring, Page 105.
8
9
515-6543-00
Playfield Support Slide Bracket
11
Edge Slide Bracket (Extended)
12
13
Pivot Pin Bracket Welded Assembly
Bracket, Eject Hole Base (for Item 5B)
14
Bracket, Back Panel Mounting
15
Tie Post 3.5" (Ladder), White Plastic
A
Shooter Sw. Assembly (at Shooter Lane)
+
*
)
535-7727-01
2
535-6862-02
2
535-5988-01
2
1
500-5329-03
535-9484-00
2
535-8964-00
10
545-5253-01
Item 10 is secured by: #8 X 1/2" SLT HWH AB (Zinc) (Qty. 2/per) (234-5101-00) and
#8-32 X 5/8" HWH Swage (Serr) Zinc (Qty. 1/per) (237-5975-03)
Item 11 is secured by: #4 X 1/2" PFH (Zinc) (Qty. 5/per) (237-5840-00)
Item 13 is secured by: #6 X 1/2" SLT HWH AB (Zinc) (Qty. 2/per) (234-5001-02)
$
-
&
&
1
Item 9 is secured by: #8 X 1/2" SLT HWH AB (Zinc) (Qty. 2) (234-5101-00)
10
+
,
%UDFNHWVIRU0RXQWLQJ
Bracket, Mini-Coil Asm. Mounting
+
&
Mini-Coil Assembly (for Control Gate)
For Individual Items use : Coil, 32-1800 (No Sleeve) (090-5031-00), Trip Coil Frame
(535-6198-00), Spring (265-5045-01), #8-32 X 3/8" PPH MS Ext. Sems (Zinc) (232-5301-00)
and Cable Wiring (036-5500-11-84 includes 2-Pin Connector 045-5007-02)
Ordering Note: For Items 8 & 9 assembled with Cable Wiring use 515-6544-01-84.
'
/
/
/
/
/
Item 14 is secured by: #8 X 1/2" SLT HWH AB (Zc) (Qty. 2/per) (234-5101-00)
P
Item 15 is secured by: #6 X 5/8" SLT HWH AB (Zc) (Qty. 1/per) (234-5002-00)
0LVFHOODQHRXV6ZLWFKHV
1
500-6096-00
9
For Individual Items use : Switch Bracket (535-6173-00), Micro Switch (180-5157-00 ),
Switch Body Protect Plate (535-6539-00), Diode 1N4004 (112-5003-00), #2-56 X 1/2" Unslt.
Serr. HWH #4 Hd.TR3 (Qty. 2) (237-5937-02) and #2-56 Hex Nut (Qty. 2) (240-5301-00)
For Bulbs & Sockets,
see Pages 72-74.
Eject Sw. Assembly (at Ejects)
For Individual Items use : Switch Bracket (535-6173-00), Micro Switch (180-5186-00 ),
Switch Body Protect Plate (535-6539-00), Diode 1N4004 (112-5003-00), #2-56 X 1/2" Unslt.
Serr. HWH #4 Hd.TR3 (Qty. 2) (237-5937-02) and #2-56 Hex Nut (Qty. 2) (240-5301-00)
B
6HF3DUWV,G
C
Micro Sw. Roll-Over Right Brkt. Assy.
D
E
Switch & Target Assy. 1" Square (White)
Switch & Target Assy. Narrow (Red)
2
500-6520-00
7
500-6227-02
4
1
515-5162-08
515-5967-02
9
Item C is secured by: #6 X 1/2" SLT HWH AB (Zinc) (Qty. 2/per) (234-5001-02)
Items D-E are secured by: #8 X 1/2" SLT HWH AB (Zinc) (Qty. 2/per) (234-5101-00)
Note Items D-E: For better view(s) or entire assembly, see Appdx. I, Pg. I1 (end of manual).
6ZLWFKHV3&%VRQ%RWWRP$VVHPEOLHV
Dual OPTO TRANS PC Board Asm.
Dual OPTO REC PCB Assembly
Micro Switch (Roller Actuator, Lite-Force)
I
Power (EOS / End-of-Stroke) Switch
J
Slingshot Stack (Blade) Switch
K
Bumper Stack (Blade) Switch
L
Switch (Drop Target)
M
N
1" Sq. Stand-Up (Side Lugs, No Brkt.)
Micro Switch (Short Actuator, Bend)
&
515-0173-00
515-0174-00
180-5119-02
1/per
180-5149-00
2/per
180-5054-00
1/per
5
180-5015-05 * An asterisk ( * ) indicates item(s) are not noted in the pictorials.
180-5158-00 1. For Sockets & Bulbs (drawings & part numbers) see Pgs. 72-74.
4
1
515-7381-00
180-5189-00
Item I located on the Flipper (Left & Right, Lower) Assemblies on Pages 78-79.
Item K located on Bumper Switch Assemblies on Page 83.
Item L located on 5-Bank Drop Target Assembly on Pages 84-85.
Items M & N located on Elvis, Stepper Motor & 3-Bank Stand-Up ... on Pages 90-91.
3LQEDOO /RFDWLRQ 0DLQW .LW $YDLODEOH 6WG
7KLV NLW FRQVLVWV RI R] 1RYXV :D[ )LQH 5HG FORWK DQG DOO 5XEEHU 5LQJV %XOEV XVHG LQ WKLV 3LQEDOO 0DFKLQH
6HFWLRQ&KDSWHU
3DJH
%
&
1
1
3
Items F, G & H located on the 4-Ball Trough Assembly on Page 77.
Item J located on Slingshot Assemblies on Page 82.
%
0
0 0
.
0
1
'
.
'
.
'
&
Note: For more views of Switches, Targets and/or PCBs used on Assemblies, see
Section 4, Chapter 2, (The Blue Pages) Drawings for Major Assemblies & Ramps
F
G
H
(
2.
7DNH1RWH
F
J
are General
Legend Note: Items noted with a black square
Parts. Items noted with a white square
are Switches, Coils,
and/or Miscellaneous PC Board(s). Items noted with a blue
square
are Switches on Major Assemblies; see The Blue Pages,
Sec. 4, Chp. 2. for parts required not appearing on this page.
If you still cannot find the part required, Call Stern® Pinball, Inc.
Technical Support, 1-800-542-5377 or 1-708-345-7700 (Opt. 1).
J
$VN \RXU GLVWULEXWRU DERXW WKH 'HOX[H 3LQEDOO
/RFDWLRQ 0DLQWHQDQFH .LW ZKLFK LQFOXGHV )OLSSHU 5HEXLOG .LWV
3DUWV,GHQWLILFDWLRQ
/RFDWLRQ
3OD\ILHOG3ODVWLFV6FUHHQHG&OHDU
.LW8SSHU3)DQG'HFDOV0\ODU.LWV
3/$67,&6 .,7 833(5 3/$<),(/'
63, 3$57 1º
Kit: Playfield Plastics (Screened & Clear)
803-5000-84 Kit includes:
Screened Set (830-6029-XX), Clear Set (830-6030-XX), Screened
Piece (Back Panel) (830-6031-00) and Clear Piece (830-6032-00)
Note: The following Screened Plastics have various parts
(brackets) riveted to them. If replacing these plastics, the
rivets must be drilled out to replace. Items can be
remounted with appropriate sized screw & nut combo.
-27, -28, -29, -31 & -35 (see Page 92 for Assy. Ref.); -19;
-21 & -25 (see Pages 96-97 for Assembly Reference)
Most last 2-digits are sequential. The following numbers
were not used: -12, -20, -22, -23, -26, -38 — -44.
For Views & Usage of some plastics on Assemblies:
-30 (Pg. 88); -09 (Pg. 93); -34 & 545-6104-00 (Pg. 94); -32 & -45
(Pg. 95); 830-6032-00 & -36 (Pgs. 96-97); 830-6031-00 (Pg. 97).
545-6104-00 Clear Thick Plastic Upper Playfield
(see Page 94 for Assembly Reference)
'(&$/6 0</$5 .,76
63, 3$57 1º
Kits: Playfield & Assembly Decals & Mylar
802-5000-84 Kit (Regular) includes:
Decal Set (820-6356-XX)
Most last 2-digits are sequential. The following numbers
were not used: -13 — -16, -19 — -79, -84 — -97.
802-5001-84 Kit (Lexan) includes:
Suede Lexan Drop Targets (820-6361-00, Qty. 10) and
Suede Lexan Hotel Door (820-6362-00, Qty. 1)
Full Playfield Mylar (820-5999-84A) and
Pop Bumper Area Mylar (820-5999-84B)
Attention: No individual Plastic or Decal can be ordered
separately, unless noted otherwise. *
Other miscellaneous plastics and/or decals can be found on the Backbox & Speaker
Panel Assemblies (Pages 60-61), Cabinet - General Parts (Pages 62-63) and
Playfield - General Parts & Switches (Below) (Page 66).
-82 & -83 (see Pgs. 92-93)
LEXAN KIT USE 802-5001-84
includes 10 Drop Targets & 1 Door
3DUWV,GHQWLILFDWLRQ
/RFDWLRQ
6HFWLRQ&KDSWHU
3DJH
6HF3DUWV,G
802-5002-84 Kit (Mylar) includes:
3OD\ILHOG5XEEHU3DUWV%ODFNJ:KLWHF5LQJV$FWXDO6L]H†
Qty. 3
**
*
*
%
%
7DNH1RWH
*
* An asterisk ( * ) indicates item(s) are
not noted in the pictorials.
6HF3DUWV,G
For views of Rubber Parts
Parts located on
assemblies below
the playfield, see
Sec. 4, Chp. 2,
Drawings ...
( BLUE PAGES )
%
%
Note: Item 14, 7/16" O.D. Black Rings (Qty. 33/37) are
used to cusion the Bayonet Sockets under the playfield.
1º 58%%(5 3$57 1$0(
A
B
C
D*
E*
F*
G
H*
47< 63, 3$57 1º
545-5207-00
545-5207-22
545-5277-00
545-5277-22
545-5428-00
545-5105-00
545-5009-00
545-5151-00
545-5308-22
545-5308-00
545-5308-08
545-5850-00
Small Flipper BLACK Ring
Sm. Flipper RED (Soft Duro) Ring
Large Flipper BLK (50 Duro) Ring
4
Lg. Flipper RED (Soft Duro) Ring
Bumper (Deflector Pad) on Asm’s 4 below / 1 above
Bumper (Grommet) 1138 (A60)
1
Bumper (Post)
Bumper (Post Sleeve, Short)
Bumper RED (Post Sleeve, Tall)
Bumper BLACK (Post Sleeve, Tall)
5
Bumper WHITE (Post Sleeve, Tall)
O-Ring 11/32" X 7/32" X 1/16"
(Located inside Cabinet by each Flipper Button Assembly)
6HFWLRQ&KDSWHU
3DJH
1º
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
63, 3$57 1ž 47< 58%%(5 3$57 1$0( 47<
9Black 3" I.D. Ring White: 2
545-5348-10
9Black 23e4" I.D. Ring White:
545-5348-20
9Black 21e2" I.D. Ring White: 3
545-5348-09
9Black 2" I.D. Ring White:
545-5348-08
9Black 13e4" I.D. Ring White:
545-5348-21
9Black 11e2" I.D. Ring White: 1
545-5348-07
9Black 11e4" I.D. Ring White:
545-5348-06
9Black 1" I.D. Ring White: 1
545-5348-05
9Black 3e4" I.D. Ring White: 1
545-5348-04
9Black 7/16" I.D. Ring White: 3
545-5348-18
9Black 3e8" I.D. Ring White:
545-5348-03
9Black 5/16" I.D. Ring White: 4
545-5348-02
3
545-5348-01 1 9Black /16" I.D. Ring White: 7
7
545-5348-17 37 9Black /16" O.D. Ring White: 11
3e " O.D. Ring
9
White:
Black
8
545-5348-19
63, 3$57 1ž
545-5348-60
-70 N/U
545-5348-59
545-5348-58
-71 N/U
545-5348-57
545-5348-56
545-5348-55
545-5348-54
545-5348-68
-53 N/U
545-5348-52
545-5348-51
545-5348-67
545-5348-69
1º
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
3DUWV,GHQWLILFDWLRQ
/RFDWLRQ
‚ ,WHPV ZLWK QR 4W\ TXDQWLW\ DUH QRW XVHG LQ WKLV JDPH
6L]H DQGRU TXDQWLWLHV PD\ FKDQJH GXULQJ SURGXFWLRQ
3OD\ILHOG0HWDO3RVWV6FUHZV1XWV$FWXDO6L]H† Top
6
Thread
Top
Top
6
6 6
Item 4 Post can use 5/16" I.D. Black Ring, 545-5348-02 or White Ring 545-5348-52.
Items 6-8 Posts can use 3/8" O.D. Black Ring, 545-5348-19 or White Ring, 545-5348-69.
Thread
Thread
Tap
6
Top
6
Thread
Tap
6
Tap
No
Tap
6
Front View
Top
6
Thread
Top
9:
Thread
9
9
9
9
9
9
9
9
9
9
5
9 Bottom
5
5
Thread
5
Bottom
9
5
9
9
5
5
Bottom
Item 12 through Item 16
Bottom
Thread
Thread
Thread
9
5
Thread
Items 7 & 8
Bottom
9:
9
9
5
Items 12-15 Posts can use a Black Post Rubber Sleeve (Tall), 545-5308-00 or White Post Rubber Sleeve (Tall), 545-5308-08.
Bottom
Nut Note: All nuts shown with a " " are used in this game. The quantities (not specified) vary.
The remaining Items listed are not used in this game and are noted for reference only (used in prior games).
Thread
Side View
Bottom
Thread
9
Shown Below~
#6-32
Nylon Stop Nut:
240-5005-00
Shown Below~
#6-32
KEPS Nut
(with Star Washer):
240-5008-00
Top & Side Views
Shown Below~
#6-32
Hex Nut
(No Star Washer):
240-5004-00
Shown Below~
#6-32
T-Nut:
240-5002-00
Bottom & Side Views
Top View
Bottom & Side Views
Top & Side Views
Nylon Stop Nuts
Not Shown:
KEPS Nuts
Not Shown:
Hex Nuts
Not Shown:
T-Nuts
Not Shown:
Miscellaneous Nuts
Not Shown:
#6-32
(w/ 1e4" Hex Body):
240-5010-00
#8-32:
240-5102-00
#10-32:
240-5203-00
#10-24:
240-5206-00
#4-40:
240-5303-00
#4-40
(18/8 Stainless):
240-5303-01
5/16"-18:
240-5316-00
#6-32
(w/ 1e4" Hex Body):
240-5011-00
#8-32:
240-5104-00
#10-32:
240-5208-00
#10-24:
240-5207-00
#4-40:
240-5318-00
#8-32:
240-5103-00
#10-32:
240-5201-00
#10-24:
240-5202-00
#10-32 X 3e8":
240-5209-00
3e4-16:
240-5315-00
#2-56:
240-5301-00
7e8"-14:
240-5317-00
#6-32
(w/Side Cut Off):
240-5002-01
#8-32:
240-5101-00
#10-32
(Black Oxide):
240-5007-00
#10-32
(w/Side Cut Off):
240-5205-00
#10-32 X 5/16"
240-5204-00
#10-24:
240-5200-00
Plastic Pal Nut
(on Flipper Buttons):
240-5003-00
Metal Pal Nut
(on Flipper Buttons):
240-5003-01
#6-32 Wing Nut:
240-5001-00
#8-32 Wing Nut:
240-5100-00
#10-24 Wing Nut:
240-5211-00
1e4"-20 Wing Nut:
240-5302-00
1e4"-20 Toggle Wing:
240-5324-00
6
:
6
6
6
Shown Below~
1e4" X 20
Flange Nut:
240-5300-00
6
Items A & B are typically used to secure
Hex Spacers above the Playfield.
Item D is typically used to secure "Item 15 (515-5939-00)
in Bumper Bottom Assy., 515-6459-04".
Note: The "Fins" keep the screw from turning inside the wood hole.
Items A-D all
Bottoms are
9:
Thread
†
6L]H DQGRU TXDQWLWLHV PD\ FKDQJH GXULQJ SURGXFWLRQ
,WHPV ZLWK QR 4W\ TXDQWLW\ DUH QRW XVHG LQ WKLV JDPH
$
%
&
1º 0(7$/ 3267 1$0(
1
2
3
4
5
6
7
8
9
10
'
Post Fstn. #6-32 Top / Wood Scr. Bot.
Post Fasten #6-32 Top / #6-32 Bot.
Post Fasten #8-32 Top / #6-32 Bot.
Adjustable Sliding Post (Brass) #8-32 Bot.
Mini-Post Wood Screw (no cut-away)
Mini-Post Wood Screw
Mini-Post MS / #10-32 Bot. .4" Thread
Mini-Post MS / #10-32 Bot. .875" Thread
Post #6-32 Top / Wood Screw Bottom
Post #6-32 Tap / #6-32 Bottom
3DUWV,GHQWLILFDWLRQ
/RFDWLRQ
47< 63, 3$57 1º 1º 0(7$/ 3267 1$0(
14
3
4
1
7
13
530-5010-02
530-5012-02
530-5008-00
530-5621-00
530-5004-01
530-5004-00
530-5005-01
530-5005-00
530-5263-01
530-5127-00
11
12
13
14
15
16
Post Fasten #6-32 Top / #8-32 Bot.
Post Hex Base #6-32 Tap/#10-32 Bot.
Post Hex Base (No Tap)/#10-32 Bot.
Post Hex Base #8-32 Top/#10-32 Bot.
Post Hex Base #6-32 Top/#10-32 Bot.
Post Hex Base #6-32 Tap/#10-32 Bot.
A
B
C
D
#6-32 X 3/4" Fin Shank Screw
#6-32 X 7/8" Fin Shank Screw
#6-32 X 1 " Fin Shank Screw
#6-32 X 13/16" Spiral Fin Shank Screw
47< 63, 3$57 1º
3
5
530-5007-00
530-5332-01
530-5332-00
530-5332-02
530-5332-03
530-5679-00
9
4
9
237-5921-02
237-5921-04
237-5883-00
237-5957-00
2
6HFWLRQ&KDSWHU
3DJH
6HF3DUWV,G
Item C is typically used with the bottom Cabinet Speaker
(used with #6-32 Nylon Stop Nut, 240-5005-00).
3OD\ILHOG+H[6SDFHUV$FWXDO6L]H†
Hex Spacers:
Tap
e
e
$
e e e
$
%
e
$
H[DPSOH RI %V
e e
$
with Male #6-32 Thread
1-end, #6-32 Tap on other.
7DNH1RWH
Items 1-33 are
wide. Items 34-39 are 5/16" wide. With Items
1-3A, 4A, 5 & 6A (the tap goes thru the length of spacer). With
Items 7, 8A, 9-33 & 34-49, the tap is up to 5e8" deep on each end.
Note: Items 3B, 4B, 6B (Not Shown) & 8B (Shown as example
of all "B" Styles) all have a #6-32 Threaded end, the other end
Tapped (same as Items 7-33).
1e4"
e
e e
e
e e e e
e 6HF3DUWV,G
e
X 1e4" : #6-32 Tap (both ends)
X 1e4" : #6-32 Tap (both ends)
X 1e4" : #6-32 Tap (both ends)
Identical to 3A with #6-32 Thread end
5e "
X 1e4" : #6-32 Tap (both ends)
8
Identical to 4A with #6-32 Thread end
3e "
X 1e4" : #6-32 Tap (both ends)
4
7e "
1e " : #6-32 Tap (both ends)
X
8
4
Identical to 6A with #6-32 Thread end
1"
X 1e4" : #6-32 Tap (both ends)
11e8" X 1e4" : #6-32 Tap (both ends)
Identical to 8A with #6-32 Thread end
11e4" X 1e4" : #6-32 Tap (both ends)
15/16" X 1e4" : #6-32 Tap (both ends)
13e8" X 1e4" : #6-32 Tap (both ends)
11e2" X 1e4" : #6-32 Tap (both ends)
15e8" X 1e4" : #6-32 Tap (both ends)
13e4" X 1e4" : #6-32 Tap (both ends)
17e8" X 1e4" : #6-32 Tap (both ends)
2"
X 1e4" : #6-32 Tap (both ends)
21e8" X 1e4" : #6-32 Tap (both ends)
21e4" X 1e4" : #6-32 Tap (both ends)
6HFWLRQ&KDSWHU
3DJH
e Top &
Bottom
e 5
Thread
e e
e A Standard USA 9 Inch Ruler
is provided on the back cover.
+(; 63$&(5 1$0(
1e "
4
3e "
8
1e "
2
e
e
e e
e
e e e e ‡ Hex Spacers Not Used in current games may no
longer be available. Choose an available size (+/-)
and compensate with washers or other spacers.
47< 63, 3$57 1º
254-5008-00
254-5008-12
6 254-5008-03
254-5024-03
254-5008-02
254-5024-02
1 254-5008-04
254-5008-05
254-5024-05
254-5008-06
254-5008-17
2 254-5024-17
254-5008-11
254-5008-34
254-5008-33
254-5008-09
254-5008-13
1 254-5008-10
254-5008-20
2 254-5008-07
254-5008-32
1 254-5008-18
1º
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
+(; 63$&(5 1$0(
23e8"
21e2"
25e8"
23e4"
27e8"
3"
31e8"
31e4"
31e2"
35e8"
33e4"
4"
41e4"
43e8"
51e4"
11e4"
13e4"
2"
4"
45/16"
4.92"
17e8"
47< 63, 3$57 1º
254-5008-28
3 254-5008-16
3 254-5008-08
2 254-5008-15
254-5008-31
2 254-5008-14
254-5008-19
254-5008-26
254-5008-27
254-5008-25
254-5008-36
254-5008-21
254-5008-30
254-5008-29
254-5008-35
254-5018-09
254-5018-06
254-5018-07
254-5018-03
254-5018-00
254-5018-04
530-5285-00
X 1e4" : #6-32 Tap (both ends)
X 1e4" : #6-32 Tap (both ends)
X 1e4" : #6-32 Tap (both ends)
X 1e4" : #6-32 Tap (both ends)
X 1e4" : #6-32 Tap (both ends)
X 1e4" : #6-32 Tap (both ends)
X 1e4" : #6-32 Tap (both ends)
X 1e4" : #6-32 Tap (both ends)
X 1e4" : #6-32 Tap (both ends)
X 1e4" : #6-32 Tap (both ends)
X 1e4" : #6-32 Tap (both ends)
X 1e4" : #6-32 Tap (both ends)
X 1e4" : #6-32 Tap (both ends)
X 1e4" : #6-32 Tap (both ends)
X 1e4" : #6-32 Tap (both ends)
X 5/16" : #6-32 Tap (both ends)
X 5/16" : #6-32 Tap (both ends)
X 5/16" : #6-32 Tap (both ends)
X 5/16" : #6-32 Tap (both ends)
X 5/16" : #6-32 Tap (both ends)
X 5/16" : #6-32 Tap (both ends)
X 3e8" : #8-32 Thread (both ends)
,WHPV ZLWK QR 4W\ TXDQWLW\ DUH QRW XVHG LQ WKLV JDPH
e 3DUWV,GHQWLILFDWLRQ
/RFDWLRQ
6L]H DQGRU TXDQWLWLHV PD\ FKDQJH GXULQJ SURGXFWLRQ
1º
1
2
3A
3B*
4A
4B*
5
6A
6B*
7
8A
8B
9
10
11 ‡
12
13 ‡
14
15 ‡
16
17
18
e
e
†
3OD\ILHOG3ODVWLF3RVWV6SDFHUV$FWXDO6L]H†
**
9DULRXV
&RORUV
e
7DNH1RWH
Black
Clear
Red
Amber
Green
Blue
Yellow
Orange
White
Purple
Fluor. Orange
Fluor. Green
-06
-07
-08
-09
-10
-11
-12
-13
-14
-15
-16
‡
‡
3$ 5 7 & 2 / 2 5 & + $ 5 7
1º &RORU
1º &RORU
Fluor. Blue
Teal Green
Gray
Luminescent
Gold
e
e
e
7DNH1RWH
e
e
e
e
†
6L]H DQGRU TXDQWLWLHV PD\ FKDQJH GXULQJ SURGXFWLRQ
,WHPV ZLWK QR 4W\ TXDQWLW\ DUH QRW XVHG LQ WKLV JDPH
1º 3267 63$&(5 1$0(
1 3e8" X 1e2" Metal Spacer (Backbox)
2** Top Lane Plastic Mini-Lite Hood (Red)
e
e
e
47< 63, 3$57 1º
2
4
530-5099-00
550-5061-02
Item 2 typically secured by: #6-32 X 1-3/4" PPH MS (Zinc) (Qty. 2/per) (237-5511-00) and
Washer 9/64" X 5/16" OD X 1/32" (Qty. 2/per) (242-5017-00), if used.
3** Mini-Jewel Plastic Post (Clear)
1
550-5052-01
Item 3 typically secured by: #6 X 3/8" HWH AB (Zinc) (Qty. 1/per) (234-5000-00)
11/16" 1-Groove Plastic Post (Black)
11/16" 1-Groove Plastic Post (Clear)
4**
5** 1-Groove Jewel Plastic Post (Clear)
27
2
550-5059-00
550-5059-01
550-5034-01
Items 4 & 5 typically secured by: Post Fastening Screw #6-32 Top / #6-32 Bottom
(Qty. 1/per) (530-5012-02, Item 6 Page 69).
1e " Slf. Rtn. Plastic Spacer White
4
3e " Slf. Rtn. Plastic Spacer White
8
5e " Slf. Rtn. Plastic Spacer White
8
3e " Slf. Rtn. Plastic Spacer White
4
1e " X 1e " Plastic Spacer White (Narrow)
2
4
1e " X 3e " Plastic Spacer Gray
8
8
3/ " X 3e " Plastic Spacer Gray
8
16
1e " X 3e " Plastic Spacer Gray
4
8
6‡
7‡
8‡
9‡
10
11
12
13
3DUWV,GHQWLILFDWLRQ
/RFDWLRQ
4
6
4
254-5007-02
254-5007-01
254-5007-00
254-5007-03
254-5000-03
254-5000-19
254-5000-18
254-5000-02
1º
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30‡
e e e 3267 63$&(5 1$0(
3e "
8
1e "
2
5e "
8
3e "
4
7e "
8
Use 254-5000-06N
for Natural (White)
If any one of Items 11-23 Plastic Spacers is not available in the size required,
order the smaller sized spacers required to stack sizes together until
appropriate size is achieved (e.g. If 11e8" is needed but unavailable, order a 1e2" + 5e8" & stack to = 11e8").
e
e
e
‡ Items 6 through 9 dimensions are measured from bottom
to just under the cut-away. Item 30 dimension is measured
from top-to-top of curve. See pictorials with Items 9 & 30.
‡
‡
‡ WKUX GLPHQVLRQ LV
PHDVXUHG IURP
WKLV SRLQW
** Items 2, 4 & 5 come in various colors (may not be available in every
color). Item 4 is currently only available in the color(s) stated in this
game manual (other colors used in prior games may no
GLPHQVLRQ LV PHDVXUHG IURP WKLV SRLQW
longer be available). The "-XX" or last 2-Digits in Part
Nºs which come in various colors, should be replaced
e
with the desired 2-Digit Nº from the above Color Chart.
Some colors may no longer be available for desired item.
6
5
‡
e
Note the Part Nº &
Material Difference
3 / $ 6 7 , &
1º &RORU
-00
-01
-02
-03
-04
-05
Items 4-5 Posts used in pairs can use 3e4" through 3"
Rubber Rings, see Rubber Parts for Part Numbers.
e
e
e X 3e8" Plastic Spacer Gray
X 3e8" Plastic Spacer Gray
X 3e8" Plastic Spacer Gray
X 3e8" Plastic Spacer Gray
X 3e8" Plastic Spacer Gray
1" X 3e8" Plastic Spacer Gray or Black
11e8" X 3e8" Plastic Spacer Gray
11e8" X 3e8" Plastic Spacer Natural
11e4" X 3e8" Plastic Spacer Gray
11e2" X 3e8" Plastic Spacer Gray
115/16" X 3e8" Plastic Spacer Gray
1e " X 5/ " X .144" I.D. Metal Spacer
4
16
1e " X 5/ " X .144" I.D. Metal Spacer
2
16
9/16"X 5/16" X .144" I.D. Metal Spacer
3e " X 5/ " X .144" I.D. Metal Spacer
4
16
11e8" X 5/16" X .144" I.D. Metal Spacer
1" X 5/16" X .144" I.D. Metal Spacer
7e " Plastic Spacer Support (Dual-Locking)
8
47< 63, 3$57 1º
1
5
2
1
1
1
3
254-5000-12
254-5000-01
254-5000-14
254-5000-07
254-5000-11
254-5000-04
254-5000-06
254-5000-06N
254-5000-05
254-5000-08
254-5000-15
254-5014-03
254-5014-00
254-5014-04
254-5014-01
254-5014-02
254-5001-00
254-5039-14
6HFWLRQ&KDSWHU
3DJH
6HF3DUWV,G
under Items
AP-B/-C on
Page 61).
can use 3/16" Black Ring,
545-5348-01 or
White Ring, 545-5348-02
5
5
can use 3/16"
Black Ring, or
White Ring,
545-5348-51
545-5348-01
can use 5/16"
Black Ring,
545-5348-02 or
White Ring,
545-5348-52
Item 1, Metal
Spacer, used
in the Backbox
(see securing
hardware
**
/LPLWHG
&RORUV
can use 5/16" Black Ring,
545-5348-02 or
White Ring, 545-5348-52
**
9DULRXV
&RORUV
can use a Post Rubber Sleeve (Short),
545-5151-00
**
3OD\ILHOG%DFN3DQHO6PDOO%D\RQHW7\SH%XOEV6RFNHWV$FWXDO6L]H†
%
$
%OXH
$PEHU 47
&OHDU
Z
%UDFNHW
6HF3DUWV,G
%XOE
1º 60$// %8/% RU 62&.(7 1$0( 47< 63, 3$57 1º
A
A
A
A
A
A
B
1
2
3
3-10
4
5
6
7
8
9
10
#44 Bulb (Clear) Heavy Filament
#44 Bulb (Red)
#44 Bulb (Amber)
#44 Bulb (Orange)
#44 Bulb (Blue)
#44 Bulb (Yellow)
#455 Twinkle Bulb
2-Lug Staple Down Socket
3-Lug Stand-Up Short Socket
2-Lug Stand-Up Short Socket
2-Lug S-U Short Socket w/ Item 10 Bracket
3-Lug Staple Down Socket
2-Lug Laydown Socket
3-Lug Stand-Up Long Socket
3-Lug Laydown Socket (3 Lugs Flat)
2-Lug Stand-Up Long Socket
3-Lug Stand-Up Long Shell Socket
2-Lug Stand-Up Lg. Shell Socket (GIs)
6HFWLRQ&KDSWHU
3DJH
64 165-5000-44-HF
1 165-5053-02
165-5053-03
1 165-5053-07
1 165-5053-05
5 165-5053-06
165-5003-00
14 077-5000-00
8 077-5008-00
077-5002-00
22 077-5002-31
077-5001-00
077-5003-00
5 077-5009-00
077-5006-00
077-5005-00
077-5013-00
5 077-5031-00
1º
11
12
62&.(7 1$0(
1-Lug Stand-Up Long Shell Socket
3-Lug Laydown Socket (2 Lugs Bent)
47< 63, 3$57 1º
14
077-5012-00
077-5032-00
3DUWV,GHQWLILFDWLRQ
/RFDWLRQ
,WHPV ZLWK QR 4W\ TXDQWLW\ DUH QRW XVHG LQ WKLV JDPH
<HOORZ
6L]H DQGRU TXDQWLWLHV PD\ FKDQJH GXULQJ SURGXFWLRQ
%XOEV
†
5HG 2UDQJH 3OD\ILHOG%DFN3DQHO/DUJH%D\RQHW7\SH%XOE6RFNHWV$FWXDO6L]H†
&
%XOE
†
6HF3DUWV,G
6L]H DQGRU TXDQWLWLHV PD\ FKDQJH GXULQJ SURGXFWLRQ
,WHPV ZLWK QR 4W\ TXDQWLW\ DUH QRW XVHG LQ WKLV JDPH
1º /$5*( %8/% 62&.(7 1$0( 47< 63, 3$57 1º 1º /$5*( %8/% 62&.(7 1$0( 47< 63, 3$57 1º
C
1
2
#89 Bulb Heavy Filament
2-Lug Laydown Standard Socket
2-Lug Stand-Up Short Socket
3DUWV,GHQWLILFDWLRQ
/RFDWLRQ
3
3
165-5000-89-HF
077-5100-00
077-5101-00
3
4
5
6
2-Lug Stand-Up Long Socket
2-Lug Stand-Up Rev. Mount Socket
2-Lug Stand-Up Rv. Mnt. Short Socket
2-Lug Straight Leg Socket
077-5102-00
077-5103-00
077-5106-00
077-5107-00
6HFWLRQ&KDSWHU
3DJH
3OD\ILHOG:HGJH%DVH%XOEV6RFNHWV$FWXDO6L]H†
*UHHQ
'
%OXH
%XOEV
%OXH
&OHDU
&OHDU
5HG
(
$PEHU
<HOORZ
5HG
%XOEV
<HOORZ
Socket does not have a bracket. Old
stock may include an "L" style bracket
(on each side) but was never required).
DE7RS9LHZE6LGH9LHZLV1RW6KRZQ
7DNH6SHFLDO1RWH
DE
D
5/16"
3.
4.
Item 3 Socket has 2 Wires attached are approximately 12" ea.
Item 5 Socket was used on PC Light Boards to position bulbs
vertically; Item 5 Socket is secured by "twisting" into place.
Item D Bulb (#555) can be used in all sockets, except Item 6.
Item E Bulb (#906) can be used in all sockets, except Item 5.
Item 7a Socket is equipped with a bu ilt-in Diode, 1N4003
(112-5003-00), however, replacement can be made with a
1N4001 Diode (112-5001-00).
Item 7b Socket is NOT equipped with a diode (Not Required).
Note: Always replace with same type bulb in original application.
ELV
<HOORZZLWK
1R'LRGH
squeeze
D
DRQO\
Just squeeze the "side arms"
of the socket together & pull
away from the bracket or
mounting board for easy Bulb
replacement.
1º :('*( %8/% 62&.(7 1$0( 47< 63, 3$57 1º 1º :('*( %8/% 62&.(7 1$0( 47< 63, 3$57 1º
D
D
D
D
D
E
E
E
E
E
#555 Wedge Base Bulb (Clear)
#555 Wedge Base Bulb (Red)
#555 Wedge Base Bulb (Green)
#555 Wedge Base Bulb (Blue)
#555 Wedge Base Bulb (Yellow)
#906 Wedge Base Bulb (Clear)
#906 Wedge Base Bulb (Red)
#906 Wedge Base Bulb (Amber)
#906 Wedge Base Bulb (Blue)
#906 Wedge Base Bulb (Yellow)
6HFWLRQ&KDSWHU
3DJH
57
7
165-5002-00 1
165-5054-02 2
165-5054-04 3
165-5054-05 4
165-5054-06 5
165-5004-00 6
165-5004-02 7a
165-5004-03 7b
165-5004-05 8a
165-5004-06 8b*
Wedge Base Socket (Laydown)
Wedge Base Socket (Offset)
W.B. Socket (Bumpers/Special App.)
Wedge Base Socket (Laydown GI)
#555 only Wedge Base Socket (Twist)
#906 only Wedge Base Socket (Twist)
IDC Snap-On Socket
IDC Snap-On Socket No Diode
5/16" Ht. Snap-On Socket Bracket
19/32" Ht. Snap-On Socket Bracket
5
3
52
3
51
077-5026-01
077-5029-00
077-5206-00
077-5030-00
077-5007-00
077-5016-00
077-5216-00
077-5216-01
545-5760-18
545-5760-19
3DUWV,GHQWLILFDWLRQ
/RFDWLRQ
,WHPV ZLWK QR 4W\ TXDQWLW\ DUH QRW XVHG LQ WKLV JDPH
1.
2.
6L]H DQGRU TXDQWLWLHV PD\ FKDQJH GXULQJ SURGXFWLRQ
* An asterisk ( * ) indicates item(s) are not noted in the pictorials.
†
6HF3DUWV,G
7DNH1RWH
Item 7a is an IDC (Insulation
Displacement Connection) Style
Socket (this style is solderless).
This socket is secured to the
playfield or component by Items
8a or 8b Snap-On Socket
Brackets, or may also be snapped
into specially cut Clear and/or
Screened Plastic Pieces (used
only when sockets are positioned
closely together and/or in a special
applications, e.g. on Ramps). If
Plastic Pieces are used to mount
some 7a or 7b Sockets, it will be
noted on Page 67, Playfield Plastics & Decals.
Section 4
Chapter 2 of 2
Cabinet, Backbox and/or
D r a w i n g s f o r M a j o r A s s e m b l i e s & R a m p s For
General Playfield Parts (not
described herein), see the
(The Blue Pages)
Pink Pages, 59-74.
4-Ball Trough
Flipper (Left)
Table of Contents & Overview Ball Shooter (Plunger)
Important: Read all " Take Note: " items.
Flipper (Right)
Flipper (Upper Left)
76
77
81
5-Bank D/T Cont.
84
85
Magnet Coil, Bracket ...
Elvis, Stepper Motor ...
Slingshots
Flipper (Upper Right)
80
79
5-Bank Drop Target
Autoplunger Arm...
Ball Eject ... (Left)
Bumper Top, Bot. & Sw.
82
83
Ball Eject ... (Right)
86
87
... Stepper Motor Cont.
78
Hotel
Plastics
Reference
Hound Dog Pop-Up ...
88
Hotel Door Hotel Door Coil Cont.
Coil
... Frame, Stand-Up ...
Ball Lock
89
Upper Playfield
90
91
Left Ramps
Right Ramps
92
93
Left Ramps Continued
UK Ball
Deflector
UK Up/
Down Post
Back Panel
94
Drawings for Major
Assemblies & Ramps
95
96
97
98
Section 4, Chapter 2
Page 75
Sec. 4: Drawings ...
Drawings are provided for the Major Assemblies in this game with individual parts of
each assembly numbered. Items noted with
a white circle
are mounted above the
playfield; items noted with a black circle
are mounted below. All numbered parts
describe the NAME, QUANTITY & PART
NR. & ASSOCIATED PARTS (AP-).
%DOO6KRRWHU3OXQJHU$VVHPEO\,WHPV
0DQXDOO\ODXQFKWKHEDOOLQWRSOD\
1º ,1',9,'8$/ 3$57 1$0(
1
Housing (Shooter Assembly)
47< 63, 3$57 1º
1
535-5067-02
1º ,1',9,'8$/ 3$57 1$0(
Item 1 is secured to the Cabinet by: Support Plate (Qty. 1) (535-5027-00), #10-32 X 1/2"
PPH (Sems) Zinc TF (Qty. 3) (237-6033-00), #10 Split Lock Washer (Qty. 3) (244-5003-00)
and #6 X 5/8" SHWH AB (Zinc) (Qty. 2) (234-5002-00)
2
Rod Assembly (w/Black Knob)
1
Comp. Spring (ORANGE, .038" ø)
Compression Spring (Short Plunger)
Bushing, 3/8" I.D. (Oilite)
Washer, 3/8" I.D. X 5/8" O.D. X 1/16"
3
4
5
6
515-6557-00
47< 63, 3$57 1º
1
1
2
3
266-5001-07
266-5010-00
280-5010-00
242-5014-00
Retaining Ring, 3/8" ø Shaft
Plunger Tip (Black 50 Duro)
7
8
1
1
270-5012-00
545-5276-00
??????????????????????????????????????????????????
$XWRSOXQJHU$UP:HOG$VVHPEO\ 9:
,WHPV
$XWRPDWLFDOO\ODXQFKHVWKHEDOOLQWRSOD\
1º $50 :(/' 3$57 1$0(
1
Arm Weld Assembly
:RUNVLQFRQMXQFWLRQZLWKWKH$UP:HOG$VP
47< 63, 3$57 1º
1
515-6526-00
Item 1 is secured to Item 2 by: Retaining Ring, 1/4" ø Shaft (Qty. 1) (270-5002-00)
2
3
4
Autoplunger Fulcrum
Nyliner, 1/4" (Thomson #4l1-FF)
Plunger & Link Assembly
1
2
1
Compression (Return) Spring
1
535-7697-00
545-5423-00
515-5338-00
266-5020-00
6
Autoplunger Coil Bracket Assembly
1
515-6527-00
7
Coil Retainer Bracket
1
535-5203-03
Item 7 is secured to Item 6 by: #8-32 X 1/4" PPH MS (Sems) Zinc (Qty. 2) (232-5300-00)
8
Coil, 23-800
1
090-5001-00B
Coil has a Diode (1N4004) (112-5003-00) positioned @ bot. (below lugs opposite windings).
9
Coil Sleeve
1
545-5031-00
Ordering Note: If either 500-6091-00 or 500-6092-03B are unavailable, order the individual
part(s) actually required.
!
!
7DNH1RWH
Coil Note: Either -00B or -00T can be used for coil replacements.
B/T listed is preferable for easier diode access & may differ on game.
For Securing Hardware, see the Parts
Table above, under the item desired.
E-Ring
Qty. 2
Link
Roll
Pin
For Securing Hardware,
see the Parts Table above,
under the item desired.
6HFWLRQ&KDSWHU
3DJH
Coil Sleeve thru Coil
4
6HF'UDZLQJV
E-Ring
47< 63, 3$57 1º
Ordering Note: For Items 1-5 assembled, use the Assembly Part
Number, 500-6091-00. For Items 6-9 assembled, use the Assembly
PN, 500-6092-03B; or order the individual part(s) actually required.
Shown in 45°
Pivot for clarity.
1º ·3/81*(5 &2,/ 3$57 1$0(
Items 1 & 6 are secured below the P/F by: #8 X 1/2" SHWH AB (Zc.) (Qty. 9) (234-5101-00)
Item 4 is secured to Item 1 by: Retaining Ring, 1/4" ø Shaft (Qty. 1) (270-5002-00)
For Individual Items use : Plunger 2" Lg. (530-5025-01), Plunger Link (545-5293-00) and
Roll Pin 1/8" ø x 5/8" Lg. (251-5008-00)
Ordering Note: If 515-5338-00 is unavailable, order the individual part(s) actually required.
5
$XWRSOXQJHU&RLO$VVHPEO\
%,WHPV
Plunger
'UDZLQJVIRU0DMRU
$VVHPEOLHV5DPSV
%DOO7URXJK$VVHPEO\,WHPV
DQG$VVRFLDWHG3DUWV6HH3DUWV7DEOHEHORZ
2UGHULQJ1RWH,GHQWLFDOWRZLWKH[FHSWWLRQVVHHQRWHEHORZ,WHP3DUWV7DEOH
1º ,1',9,'8$/ 3$57 1$0(
1
Ball Trough Outhole Mounting Bracket
47< 63, 3$57 1º
1
515-6580-01
Item 1 is secured below the playfield by: #8 X 1/2" SHWH AB (Zinc) (Qty. 6) (234-5101-00)
Micro Switch (Roller Actuator, Lite-Force)
Item 2 requires: Heat Shrink Tubing 1/8" ø PUI-24 (Qty. 1"/per) (605-5006-00)
Switch has a Diode (1N4004) (112-5003-00). Can be replaced with (1N4001) (112-5001-00).
2
3
4
Sw. Body Protect Plate Not Required
Coil Mounting Bracket
3
180-5119-02
0
1
535-6539-00
535-7330-01
Item 4 is secured to Item 1 by: #8-32 X 3/8" HWH Swage (Sr.) Zinc (Qty. 4) (237-5975-00)
5
Coil Retaining Bracket
1
535-5203-03
Item 5 is secured to Item 4 by: #8-32 X 1/4" HWH MS (Serr) Zinc (Qty. 2) (237-5964-01)
6
Coil, 26-1200
1
090-5044-00B
1º
11
47< 63, 3$57 1º
,1',9,'8$/ 3$57 1$0(
Trough Ball Guide Plate
1
535-7801-00
Item 11 is secured to Item 1 by: 1/4" X 5/16" X .144" I.D. Spacer Tap. (Qty. 1)
(254-5014-03) and #2-56 X 1/2" HWH (Ser) UNS #4HD TR3 BO (Qty. 4) (237-5937-02)
12
13
Dual OPTO TRANS Board Assembly
Dual OPTO REC Board Assembly
1
1
515-0173-00
515-0174-00
Items 12 & 13 are by: #6-32 X 5/8" HWH Swage (Serr) Zinc (Qty. 3/per) (237-5976-04)
For Individual Items use : Dual OPTO Transmitter Board (Qty. 1) (520-5173-00), Dual
OPTO Receiver Board (Qty. 1) (520-5174-00), OPTO PCB Tube Spacer (Brass) (Qty. 3/per)
(530-5308-02) and OPTO PCB Rubber Grommet (Qty. 3/per) (545-5518-00)
Ordering Note: If 500-6318-24 is unavailable, order the individual part(s) actually required.
This assembly is identical to 500-6318-14, -15 or -25 except for the quantity of Item 2 (an
additional switch & diode is required for the 5-Ball Trough) and Item 3, Swich Body Protect
Plates, are not required when using Item 11 (req. for Magnet use).
Coil has a Diode (1N4004) (112-5003-00) positioned @ bot (below lugs opposite windings).
7
8
Coil Sleeve (Short) (Formost #10-7077)
Plunger Assembly
1
1
545-5076-01
515-5941-01
For Individual Items use : Plunger (530-5210-00) & Nylon Plunger (530-5277-01)
9
10
Compression (Return) Spring
Rubber Bumper (Grommet)
1
1
ASSOCIATED PARTS ARE NOT INCLUDED WITH THE ABOVE ASSEMBLY.
47< 63, 3$57 1º
1º $662&,$7(' 3$57 1$0(
AP-A Ball Trough Enter / Exit Scoop
1
535-7329-01
Item AP-A secured to the playfield by: #8 X 1/2" SHWH AB (Zinc) (Qty. 4) (234-5101-00).
266-5020-00
* Steel Balls (1-1/16" ø)
545-5105-00 AP-B
4
260-5000-00
7DNH1RWH
*
!
An asterisk (*) indicates item(s) are not noted in the pictorials.
!
Coil Note: Either -00B or -00T can be used for coil replacements.
B/T listed is preferable for easier diode access & may differ on game.
For a break-down of parts of Items 12 & 13, OPTO Boards (515-0173-00 &
515-0174-00), see Section 5, Chapter 4, Trough Up-Kicker Dual OPTO
Boards Theory of Operation & Schematic, Component Layout & Parts.
7DNH6SHFLDO1RWH
$3
$
Item AP-A, Enter / Exit Scoop, 535-7329-01 (not included with the 4-Ball
Trough Assembly), is shown how it is actually positioned over the 4-Ball
Trough Assembly. It is mounted above the playfield.
See securing
hardware under
Items 12 & 13.
SW. 15
Shown Broken View to see
complete switches
SW. 14
SW. 11
See securing
hardware
under Item 11
SW. 12
Shown
Broken
View
SW. 13
Qty. 3
SW. 15
4
6HH2UGHULQJ1RWH$ERYH
For Securing Hardware,
see the Parts Table above,
under the item desired.
SW. 14
Item 12, Dual OPTO TRANS (Transmitter)
Board, 515-0173-00, is mounted on the
other side of the Trough Assembly, in line
with Item 13, Dual OPTO REC (Receiver)
Board, 515-0174-00, using same hardware.
'UDZLQJVIRU0DMRU
$VVHPEOLHV5DPSV
Cable Wiring Harness
036-5439-04
3-Pin Connector
045-5007-03
12-Pin Connector
045-5007-12
6HFWLRQ&KDSWHU
3DJH
6HF'UDZLQJV
(QWHU([LW6FRRS
)OLSSHU/HIW$VVHPEO\,WHPV
DQG$VVRF3DUWV:KLWH)OLSSHU%DW6KDIW$VV\,WHP$3$%
1º ,1',9,'8$/ 3$57 1$0(
1
Flipper Base Plate (LEFT)
47< 63, 3$57 1º
1
See FRP1
Item 1 is secured below the playfield by: #10 X 1/2" HWH MS (Serr) Zinc ST (Qty. 8)
(237-5949-00) Ordering Note: Use Item FRP1, see the end of this Parts Table.
2
Flipper Bat Bushing (White Plastic) 1/4" ø I.D.
1
Power (EOS / End-of-Stroke) Switch
1
545-5070-00
180-5149-00
Item 3 is secured to Item 1 by: #6-32 X 5/8" HWH Swage (Ser.) Zc. (Qty. 2) (237-5976-04)
4
5
6
Sw. Plate/Spring Return Brkt. (LEFT)
Flipper Return Spring
Coil Stop Bracket Sub-Assembly
1
1
1
535-7354-01
265-5035-00
515-6308-01
Item 6 is secured to Item 1 by: #10-32 X 3/8" SHWH Swage (Serr) Zinc (Qty. 2)
(237-5985-00) and #10 Split Lock Washer (Qty. 2) (244-5003-00)
7
8
Spring Washer (17/32" ID X 3/4" X 1")
Coil Support Bracket
1
1
Coil, 22-900 (YELLOW) (Left)
1
269-5002-00
535-7356-00
090-5020-20T
Coil has a Diode (1N4004) (112-5003-00) positioned @ top (above lugs next to windings).
10
11
12
Coil Sleeve
Deflector Pad (Bumper)
Flipper Plunger & Link Sub-Assy.
1
1
1
Crank Bar
1
530-5070-02
14® Switch Actuator (LEFT) Sub-Assy.
1
515-7257-01
For Individual Items use : Actuator & Spring Bracket (LEFT) (535-9038-01) and ® Switch
Actuator (White Plastic) (545-5612-00) and is secured to the Bracket by:
Rivet, 1/8" ø X 1/4" Lg. (Qty. 1) (249-5003-00)
15
Set Screw: #10-32 X 3/4" Socket Hd.
2
237-6144-00
Item 15 requires: #10-32 Nylon Stop Nut (Qty. 1 Flipper Link Side Only) (240-5203-00) and
#10 Split Lock Washer (244-5003-00) Tool Required for Item 15: 5/32" or 4mm Allen Wrench
Flipper Rebuild Parts for Easier Installation, $ave $:
Flipper Base Plate Kit (LEFT)
Includes Item 1 pre-threaded, with the
Securing Hardware for Items 2, 3, 6 & 8.
Plunger, Link & Crank (LEFT) Assy.
FRP2 Includes above Items 12, 13, 14 and 15
and is pre-assembled.
Flipper (LEFT) Rebuild Kit
FRP3 Same as FRP2, but also includes above
Items 6 & 10.
515-6617-01
FRP1
Item 8 is secured to Item 1 by: #8-32 X 3/8" HWH Swage (Ser.) Zc. (Qty. 2) (237-5975-00)
9
47< 63, 3$57 1º
,1',9,'8$/ 3$57 1$0(
Item 13 requires: Bushing, .192" ø ID X .312" ø OD X .195" (Qty. 1) (530-5139-00)
Item 2 is secured to Item 1 by: #6-32 X 3/8" HWH Swage (Ser.) Zc. (Qty. 3) (237-5976-02)
3
1º
13
545-5388-00
545-5428-00
515-6304-03
For Individual Items use : Flipper Plunger (530-5349-01) and Plunger "Flipper" Link
(545-5611-01) and is secured to the Plunger by: Bushing, .16" ø ID X .281" ø OD X .187"
(Qty. 1) (530-5532-00) and Spiral Pin ø 5/32" X 3/4" Lg. (Qty. 1) (251-5015-02)
515-7203-01
500-6307-10
ASSOCIATED PARTS ARE NOT INCLUDED WITH THE ABOVE ASSEMBLY.
47< 63, 3$57 1º
1º $662&,$7(' 3$57 1$0(
AP-A
AP-B
WHITE Flipper Bat (Plain) & Shaft
(Non-Knurled End) Assembly
Large Flipper BLACK Rubber Ring
1
1
515-5133-08-06
545-5277-00
Item 1,
Item 4,
and
Item 14
(just the
Bracket)
The coils
may also
differ
depending
on the game.
<(//2:
/HIW4
6HF'UDZLQJV
For Securing Hardware, see the Parts
Table above, under the item desired.
<(//2:
DEDICATED
SW. 02
Š
Š
7DNH1RWH
® "R" indicates Item noted is
secured with rivet(s) as listed.
Reference Service Bulletin 152
for additional information on
Items 12 & 14.
6HFWLRQ&KDSWHU
3DJH
$3
'UDZLQJVIRU0DMRU
$VVHPEOLHV5DPSV
7R2UGHUWKH)OLSSHU/HIW5HEXLOG.LWDVNIRU3DUW1U
LQFOXGHV,WHPV
The differences
between the
Left & Right
Flippers are:
)OLSSHU5LJKW$VVHPEO\,WHPV
DQG$VVRF3DUWV:KLWH)OLSSHU%DW6KDIW$VV\,WHP$3$%
47< 63, 3$57 1º
1º ,1',9,'8$/ 3$57 1$0(
Flipper Base Plate (RIGHT)
1
Item 1 is secured below the playfield by: #10 X 1/2" HWH MS (Serr) Zinc ST (Qty. 8)
(237-5949-00) Ordering Note: Use Item FRP1, see the end of this Parts Table.
Flipper Bat Bushing (White Plastic) 1/4" ø I.D.
2
1
545-5070-00
Item 2 is secured to Item 1 by: #6-32 X 3/8" HWH Swage (Ser.) Zc. (Qty. 3) (237-5976-02)
Power (EOS / End-of-Stroke) Switch
3
1
1º
13
See FRP1
180-5149-00
Sw. Plate/Spring Return Brkt. (RIGHT)
Flipper Return Spring
Coil Stop Bracket Sub-Assembly
1
1
1
535-7354-00
265-5035-00
515-6308-01
Item 6 is secured to Item 1 by: #10-32 X 3/8" SHWH Swage (Serr) Zinc (Qty. 2)
(237-5985-00) and #10 Split Lock Washer (Qty. 2) (244-5003-00)
Spring Washer (17/32" ID X 3/4" X 1")
Coil Support Bracket
7
8
1
1
14® Switch Actuator (RIGHT) Sub-Assy.
269-5002-00
535-7356-00
Coil, 22-900 (YELLOW) (Right)
1
090-5020-20T
Coil has a Diode (1N4004) (112-5003-00) positioned @ top (above lugs next to windings).
10
11
12
Coil Sleeve
Deflector Pad (Bumper)
Flipper Plunger & Link Sub-Assy.
1
1
1
545-5388-00
545-5428-00
515-6304-03
1
515-7257-00
15
Set Screw: #10-32 X 3/4" Socket Hd.
2
237-6144-00
Item 15 requires: #10-32 Nylon Stop Nut (Qty. 1 Flipper Link Side Only) (240-5203-00) and
#10 Split Lock Washer (244-5003-00) Tool Required for Item 15: 5/32" or 4mm Allen Wrench
Flipper Rebuild Parts for Easier Installation, $ave $:
Flipper Base Plate Kit (RIGHT)
Includes Item 1 pre-threaded, with the
Securing Hardware for Items 2, 3, 6 & 8.
Plunger, Link & Crank (RIGHT) Assy.
FRP2 Includes above Items 12, 13, 14 and 15
and is pre-assembled.
Flipper (RIGHT) Rebuild Kit
FRP3 Same as FRP2, but also includes above
Items 6 & 10.
515-6617-00
515-7203-00
500-6307-00
ASSOCIATED PARTS ARE NOT INCLUDED WITH THE ABOVE ASSEMBLY.
1º $662&,$7(' 3$57 1$0(
AP-A
AP-B
WHITE Flipper Bat (Plain) & Shaft
(Non-Knurled End) Assembly
Large Flipper BLACK Rubber Ring
The differences
between the
Left & Right
Flippers are:
47< 63, 3$57 1º
1
1
515-5133-08-06
545-5277-00
Item 1,
Item 4,
and
Item 14
(just the
Bracket)
The coils
may also
differ
depending
on the game.
<(//2:
5LJKW4
7R2UGHUWKH)OLSSHU5LJKW5HEXLOG.LWDVNIRU3DUW1U
LQFOXGHV,WHPV
For Individual Items use : Flipper Plunger (530-5349-01) and Plunger "Flipper" Link
(545-5611-01) and is secured to the Plunger by: Bushing, .16" ø ID X .281" ø OD X .187"
(Qty. 1) (530-5532-00) and Spiral Pin ø 5/32" X 3/4" Lg. (Qty. 1) (251-5015-02)
530-5070-02
For Individual Items use : Actuator & Spring Bracket (RIGHT) (535-9038-00) and ® Switch
Actuator (White Plastic) (545-5612-00) and is secured to the Bracket by:
Rivet, 1/8" ø X 1/4" Lg. (Qty. 1) (249-5003-00)
FRP1
Item 8 is secured to Item 1 by: #8-32 X 3/8" HWH Swage (Ser.) Zc. (Qty. 2) (237-5975-00)
9
1
Item 13 requires: Bushing, .192" ø ID X .312" ø OD X .195" (Qty. 1) (530-5139-00)
Item 3 is secured to Item 1 by: #6-32 X 5/8" HWH Swage (Ser.) Zc. (Qty. 2) (237-5976-04)
4
5
6*
47< 63, 3$57 1º
,1',9,'8$/ 3$57 1$0(
Crank Bar
For Securing Hardware, see the Parts
Table above, under the item desired.
DEDICATED
SW. 04
<(//2:
Š
Š
$3
'UDZLQJVIRU0DMRU
$VVHPEOLHV5DPSV
7DNH1RWH
® "R" indicates Item noted is
secured with rivet(s) as listed.
Reference Service Bulletin 152
for additional information on
Items 12 & 14.
6HFWLRQ&KDSWHU
3DJH
6HF'UDZLQJV
1
)OLSSHU8SSHU/HIW$VVHPEO\,WHPV
DQG$VVRF3DUWV/J:KLWH)OLSSHU%DW6KDIW$VV\,WHP$3$%
1º ,1',9,'8$/ 3$57 1$0(
1
Flipper Base Plate (LEFT)
47< 63, 3$57 1º
1
See FRP1
Item 1 is secured below the playfield by: #10 X 1/2" HWH MS (Serr) Zinc ST (Qty. 8)
(237-5949-00) Ordering Note: Use Item FRP1, see the end of this Parts Table.
2
Flipper Bat Bushing (Red Plastic) .281" I.D.
1
:545-5070-01
Item 2 is secured to Item 1 by: #6-32 X 3/8" HWH Swage (Ser.) Zc. (Qty. 3) (237-5976-02)
1e " X 3e " Spacer Gray
4
8
Item 3 is secured to Item 1 by: #6-32 X 5/8" HWH Swage (Ser.) Zc. (Qty. 2) (237-5976-04)
3
4
5
6
Sw. Plate/Spring Return Brkt. (LEFT)
Flipper Return Spring
Coil Stop Bracket Sub-Assembly
2
254-5000-02
1
1
1
535-7354-01
265-5035-00
515-6308-01
Item 6 is secured to Item 1 by: #10-32 X 3/8" SHWH Swage (Serr) Zinc (Qty. 2)
(237-5985-00) and #10 Split Lock Washer (Qty. 2) (244-5003-00)
7
8
Spring Washer (17/32" ID X 3/4" X 1")
Coil Support Bracket
1
1
269-5002-00
535-7356-00
Item 8 is secured to Item 1 by: #8-32 X 3/8" HWH Swage (Ser.) Zc. (Qty. 2) (237-5975-00)
9
Coil, 23-900 (GREEN) (Left)
1
090-5020-30
Coil has a Diode (1N4004) (112-5003-00) positioned @ top (above lugs next to windings).
47< 63, 3$57 1º
1º ,1',9,'8$/ 3$57 1$0(
14® Switch Actuator (LEFT) Sub-Assy.
1
15
Set Screw: #10-32 X 3/4" Socket Hd.
Coil Sleeve
Deflector Pad (Bumper)
Flipper Plunger & Link Sub-Assy.
Flipper Base Plate Kit (LEFT)
Includes Item 1 pre-threaded, with the
Securing Hardware for Items 2, 3, 6 & 8.
Plunger, Link & Crank (LEFT) Assy.
FRP2 Includes above Items 12, 13, 14 and 15
and is pre-assembled.
Flipper (LEFT) Rebuild Kit
FRP3 Same as FRP2, but also includes above
Items 6 & 10.
Item 13 requires:
515-6617-01
FRP1
515-7203-01
500-6307-10
ASSOCIATED PARTS ARE NOT INCLUDED WITH THE ABOVE ASSEMBLY.
1
1
1
47< 63, 3$57 1º
1
1
: 515-7399-08
545-5277-00
Below 2 Items (Not Shown) support the shaft under the Upper P/F:
AP-C Spacer, WHITE .25" ID X 1" OD X .63"
530-5070-02 AP-D Tube-Clear, .375" ID X .5" OD X 2.072"
Bushing, .192" ø ID X .312" ø OD X .195" (Qty. 1) (530-5139-00)
Crank Bar
237-6144-00
Flipper Rebuild Parts for Easier Installation, $ave $:
(Qty. 1) (530-5532-00) and Spiral Pin ø 5/32" X 3/4" Lg. (Qty. 1) (251-5015-02)
13
2
Item 15 requires: #10-32 Nylon Stop Nut (Qty. 1 Flipper Link Side Only) (240-5203-00) and
#10 Split Lock Washer (244-5003-00) Tool Required for Item 15: 5/32" or 4mm Allen Wrench
545-5388-00 1º $662&,$7(' 3$57 1$0(
545-5428-00
Large WHITE Flipper (Plain) Bat &
515-6304-03 AP-A Shaft, 4.89" (Non-Knurled End) Assembly
For Individual Items use : Flipper Plunger (530-5349-01) and Plunger "Flipper" Link
AP-B Large Flipper BLACK Rubber Ring
(545-5611-01) and is secured to the Plunger by: Bushing, .16" ø ID X .281" ø OD X .187"
10
11
12
515-7257-01
For Individual Items use : Actuator & Spring Bracket (LEFT) (535-9038-01) and ® Switch
Actuator (White Plastic) (545-5612-00) and is secured to the Bracket by:
Rivet, 1/8" ø X 1/4" Lg. (Qty. 1) (249-5003-00)
1
1
1
530-5633-00
530-5634-01
The differences between the
Upper & Lower Flippers are:
Item 3, (Upper Flippers
do not require an
E.O.S Switch).
... and on this
Game Only:
Item 2, Flipper Bat
Bushing is Red vs.
White and
.281" I.D. vs. .25"
*5((1
The coils may also
differ depending
on the game.
/HIW4
6HF'UDZLQJV
For Securing Hardware, see the Parts
Table above, under the item desired.
*5((1
Š
Š
7DNH1RWH
® "R" indicates Item noted is
secured with rivet(s) as listed.
Reference Service Bulletin 152
for additional information on
Items 12 & 14.
6HFWLRQ&KDSWHU
3DJH
$3
'UDZLQJVIRU0DMRU
$VVHPEOLHV5DPSV
7R2UGHUWKH)OLSSHU/HIW5HEXLOG.LWDVNIRU3DUW1U
LQFOXGHV,WHPV
)OLSSHU8SSHU5LJKW0RGLILHG$VV\,WHPV
DQG$VVRF3DUWV:KLWH)OLSSHU%DW6KDIW$VV\,WHP$3$%
47< 63, 3$57 1º
1º ,1',9,'8$/ 3$57 1$0(
Flipper 3-Footed Base Plate (RIGHT)
1
See FRP1
Item 1 is secured below the playfield by: #10 X 1/2" HWH MS (Serr) Zinc ST (Qty. 6)
(237-5949-00) Ordering Note: Use Item FRP1, see the end of this Parts Table.
Flipper Bat Bushing (White Plastic) 1/4" ø I.D.
2
1
545-5070-00
Item 2 is secured to Item 1 by: #6-32 X 3/8" HWH Swage (Ser.) Zc. (Qty. 3) (237-5976-02)
1e " X 3e " Spacer Gray
4
8
Item 3 is secured to Item 1 by: #6-32 X 5/8" HWH Sw. (Ser.) Zc. (Qty. 1/per) (237-5976-04)
3
4
5
6*
Sw. Plate/Spring Return Brkt. (RIGHT)
Flipper Return Spring
Coil Stop Bracket Sub-Assembly
2
254-5000-02
1
1
1
535-7354-00
265-5035-00
515-6308-01
Item 6 is secured to Item 1 by: #10-32 X 3/8" SHWH Swage (Serr) Zinc (Qty. 2)
(237-5985-00) and #10 Split Lock Washer (Qty. 2) (244-5003-00)
Spring Washer (17/32" ID X 3/4" X 1")
Coil Support Bracket
7
8
1
1
269-5002-00
535-7356-00
Item 8 is secured to Item 1 by: #8-32 X 3/8" HWH Swage (Ser.) Zc. (Qty. 2) (237-5975-00)
Coil, 23-900 (GREEN) (Upr. Rt.)
9
1
090-5020-30
Coil has a Diode (1N4004) (112-5003-00) positioned @ top (above lugs next to windings).
10
11
12
Coil Sleeve
Deflector Pad (Bumper)
Flipper Plunger & Link Sub-Assy.
1
1
1
545-5388-00
545-5428-00
515-6304-03
The coils
may also
differ
depending
on the game.
530-5070-02
1
515-7257-00
For Individual Items use : Actuator & Spring Bracket (RIGHT) (535-9038-00) and ® Switch
Actuator (White Plastic) (545-5612-00) and is secured to the Bracket by:
Rivet, 1/8" ø X 1/4" Lg. (Qty. 1) (249-5003-00)
15
Set Screw: #10-32 X 3/4" Socket Hd.
2
237-6144-00
Item 15 requires: #10-32 Nylon Stop Nut (Qty. 1 Flipper Link Side Only) (240-5203-00) and
#10 Split Lock Washer (244-5003-00) Tool Required for Item 15: 5/32" or 4mm Allen Wrench
Flipper Rebuild Parts for Easier Installation, $ave $:
Flipper 3-Footed Base Plate Kit (Upr. Rt.)
Includes Item 1 MODIFIED & pre-threaded,
with the Sec. Hardware for Items 2, 3, 6 & 8.
Plunger, Link & Crank (RIGHT) Assy.
FRP2 Includes above Items 12, 13, 14 and 15
and is pre-assembled.
Flipper (RIGHT) Rebuild Kit
FRP3 Same as FRP2, but also includes above
Items 6 & 10.
FRP1
:515-6617-84
515-7203-00
500-6307-00
ASSOCIATED PARTS ARE NOT INCLUDED WITH THE ABOVE ASSEMBLY.
1º $662&,$7(' 3$57 1$0(
AP-A
AP-B
WHITE Flipper Bat (Plain) & Shaft
(Non-Knurled End) Assembly
Large Flipper BLACK Rubber Ring
47< 63, 3$57 1º
1
1
515-5133-08-06
545-5277-00
... and on this
Game Only:
Item 1 or FRP1,
This Flipper Base
Plate for the Upper
Right Flipper has
been modified to fit
on this game. This
Support Foot
has been removed.
*5((1
:
1
14® Switch Actuator (RIGHT) Sub-Assy.
The differences between the
Upper & Lower Flippers are:
Item 3,
(Upper
Flippers
do not
require
an E.O.S
Switch).
47< 63, 3$57 1º
3$57 1$0(
Item 13 requires: Bushing, .192" ø ID X .312" ø OD X .195" (Qty. 1) (530-5139-00)
8SSHU
5LJKW4
7R2UGHUWKH)OLSSHU5LJKW5HEXLOG.LWDVNIRU3DUW1U
LQFOXGHV,WHPV
For Individual Items use : Flipper Plunger (530-5349-01) and Plunger "Flipper" Link
(545-5611-01) and is secured to the Plunger by: Bushing, .16" ø ID X .281" ø OD X .187"
(Qty. 1) (530-5532-00) and Spiral Pin ø 5/32" X 3/4" Lg. (Qty. 1) (251-5015-02)
1º ,1',9,'8$/
13* Crank Bar
For Securing Hardware, see the Parts
Table above, under the item desired.
*5((1
Š
Š
$3
'UDZLQJVIRU0DMRU
$VVHPEOLHV5DPSV
7DNH1RWH
® "R" indicates Item noted is
secured with rivet(s) as listed.
Reference Service Bulletin 152
for additional information on
Items 12 & 14.
6HFWLRQ&KDSWHU
3DJH
6HF'UDZLQJV
1
6OLQJVKRW/HIW5LJKW$VVHPEOLHV4W\,WHPV
47< 63, 3$57 1º
1º ,1',9,'8$/ 3$57 1$0(
Slingshot Bracket Assembly
1
515-5339-01
1/per
6
7
Item 1 is secured below the playfield by: #8 X 1/2" SHWH AB (Zinc) (Qty. 3) (234-5101-00)
Coil Retaining Bracket
2
535-5203-03
1/per
Item 2 is secured to Item 1 by: #8-32 X 3/8" PPH MS (Sems) (Qty. 2) (232-5301-00)
Coil, 23-800
3
1/per
090-5001-00T
Coil has a Diode (1N4004) (112-5003-00) positioned @ top (above lugs next to windings).
Coil Sleeve
Plunger & Link Assembly
4
5
1/per
1/per
545-5031-00
515-5338-00
For Individual Items use : Plunger 2" Lg. (530-5025-01), Plunger Link (545-5293-00) and
Roll Pin 1/8" ø x 5/8" Lg. (251-5008-00) The Plunger Link is secured to the Riveted Arm
by: Retaining Ring, 1/4" ø Shaft (Qty. 1) (270-5002-00)
Ordering Note: If 515-5338-00 is unavailable, order the individual part(s) actually required.
!
®
47< 63, 3$57 1º
1º ,1',9,'8$/ 3$57 1$0(
Compression (Return) Spring
Slingshot Stack (Blade) Switch
266-5020-00
180-5054-00
1/per
2/per
Only 1 of the 2 Switches has a Diode (1N4004) (112-5003-00). See Note Below on Drawing.
Can be replaced with (1N4001) (112-5001-00).
8
Switch Body Protect Plate
535-5045-00
2/per
Items 7 & 8 are secured to Item 1 by: #6-32 X 5/8" HWH Swage (Qty. 4) (237-5976-04)
9® Riveted Arm & Tip Assembly
515-5340-01
1/per
For Individual Parts use (requires drilling out rivet & rereviting) :
Arm (515-5341-01), Kicker Tip (545-5216-01) and Rivet, 1/8" ø x 1/4" Lg. (249-5003-00)
The Riv. Arm is secured to Item 1 by: Retaining Ring, 1/4" ø Shaft (Qty. 1) (270-5002-00)
Ordering Note: If 515-5340-01 is unavailable, order the individual part(s) actually required.
Ordering Note: If 500-5849-00 is unavailable, order the individual part(s) actually required.
7DNH1RWH
!
Coil Note: Either -00B or -00T can be used for coil replacements.
B/T listed is preferable for easier diode access & may differ on game.
"R" indicates Item noted is secured with rivet(s) as listed.
Kicker
Tip
Kicker
Tip
Retaining
Ring
Retaining
Ring
Š
Hinge
Stud
Riveted
Arm
Š
Link
Link
RIGHT
SW. 62
(Qty. 2)
Plunger
Plunger
Diode on
1 Switch Only
Qty. 2
Qty. 2
Qty. 2
Switch Diode Wiring Note:
Cathode Side to
Lug of Short Blade
(WHT Jumper to
2nd Switch)
Anode Side to
Middle Lug (WHT-ORG)
Coil Sleeve thru Coil
Armature Stop & Shading Ring
Qty. 2
Switch Diode Wiring Note:
Cathode Side to
Lug of Short Blade
(WHT Jumper to
2nd Switch)
Anode Side to
Middle Lug (WHT-BLU)
Coil Sleeve thru Coil
Lug of Long Blade
(GRN-GRY & WHT Jumper to
2nd Switch)
5LJKW4
/HIW4
6HF'UDZLQJV
LEFT
SW. 59
(Qty. 2)
Diode on
1 Switch Only
Riveted
Arm
Hinge
Stud
Lug of Long Blade
(GRN-GRY & WHT Jumper to
2nd Switch)
Armature Stop & Shading Ring
For Securing Hardware, see the Parts
Table above, under the item desired.
/HIW6LGH9LHZ
6HFWLRQ&KDSWHU
3DJH
5LJKW6LGH9LHZ
'UDZLQJVIRU0DMRU
$VVHPEOLHV5DPSV
%XPSHU7RS/HIW5LJKW%RWWRP$VVHPEOLHV4W\,WHPV
%XPSHU%RWWRP/HIW5LJKW%RWWRP$VV\4W\,WHPV
%XPSHU6ZLWFK/HIW5LJKW%RWWRP$VV\54W\,WHPV
DQG$VVRFLDWHG3DUWV6HH3DUWV7DEOHEHORZ
$3
GEN. ILLUM. LAMPS
$VVHPEOHG
9LHZ
G.I.
LAMPS
3/$<),(/'
:22'
LEFT
RIGHT
BOT.
SW. 49
SW. 50
SW. 51
For Securing Hardware,
see the Parts Table below,
under the item desired.
7DNH1RWH
1/per
1/per
1/per
#555 Wedge Base Bulb
Wedge Base Socket
Bumper Body
165-5002-00
077-5206-00
545-5197-00
Ring Assembly
1/per
515-5085-00
Bumper Skirt
Bumper Skirt Compression Spring
Bumper Base
1/per
1/per
1/per
545-5607-00
266-5048-00
545-5195-00
8
9
10
Plunger
Compression (Return) Spring
Coil, 26-1200
1/per
1/per
1/per
530-5348-00
266-5047-00
090-5044-00T
Coil has a Diode (1N4004) (112-5003-00) positioned @ top (above lugs next to windings).
11
12
13
14
Coil Sleeve
Fiber Yoke
Metal Yoke
Metal Yoke Stop
1/per
1/per
1/per
1/per
545-5031-00
545-5609-00
535-7346-00
535-7347-00
Item 14 is secured by: #6-32 X 1/4" HWH Swage (Serr.) Zinc (Qty. 2) (237-5976-01)
15
Coil Bracket Welded Assembly
1/per
515-5939-00
Item 15 is secured by: #6-32 X 1-3/16" Spiral Fin Shank (Qty. 3) (237-5957-00) and
#6-32 Nylon Stop Nut (Qty. 3) (240-5005-00)
%RWWRP
([SORGHG
9LHZ
44
Side View of 14 & 15
'UDZLQJVIRU0DMRU
$VVHPEOLHV5DPSV
1º
16
%803(5 6:,7&+ 3$57 1$0( 47< 63, 3$57 1º
Switch Bracket
1/per
535-7342-00
Item 16 is secured by: #8 X 1/2" HWH AB (Zinc) (Qty. 2) (234-5101-00)
17
Bumper Stack (Blade) Switch Assy.
1/per
180-5015-05
ASSEMBLY NOTE:
This Switch is -05 because it is mounted in reverse.
Identical to 180-5015-04 but mounted in reverse.
Included with Item 17 : Spoon Switch Actuator (545-5610-02).
Switch has a Diode (1N4004) (112-5003-00). Can be replaced with (1N4001) (112-5001-00).
18
Switch Body Protect Plate
1/per
535-7344-00
Items 17 & 18 are secured by: #6-32 X 3/4" HWH Swage (Serr) Zc. (Qty. 2) (237-5976-05)
The Top & Bottom Assemblies are secured together by hardware included in assemblies.
ASSOCIATED PARTS ARE NOT INCLUDED WITH THE ABOVE ASSEMBLY.
1º $662&,$7(' 3$57 1$0(
AP-A Bumper Cap (Red)
47< 63, 3$57 1º
1/per
550-5057-02
Item AP-A is secured to Item 4 by: #4 X 3/4" PRH (Zinc) T-25 (Qty. 2/per) (237-5873-00)
6HFWLRQ&KDSWHU
3DJH
6HF'UDZLQJV
1º %803(5 %27720 3$57 1$0( 47< 63, 3$57 1º
47< 63, 3$57 1º
1
2
3
5
6
7
SW. 25
SW. 26
SW. 27
-00B or -00T can be
used for coil replacements. B/T listed is
preferable for easier
diode access & may
differ on game.
1º %803(5 723 3$57 1$0(
4
SPOON SWITCH
ACTUATOR
INCLUDED WITH
ITEM 17
LEFT
RIGHT
BOT.
7DNH1RWH
Coil Note: ! Either
Item 4 is secured by: #6-32 Nylon Stop Nut (Qty. 2) (240-5005-00)
3/$<),(/' :22'
!
Item 3 is secured by: #5 X 7/8" PRH AB (Zinc) (Qty. 2) (237-5826-00)
Individual parts can be ordered.
However, if the entire Bumper is required,
use all three (3) Assembly Part Numbers
at the top of this page.
44
7RS
([SORGHG
9LHZ
%DQN'URS7DUJHW$VVHPEO\,WHPV
3DUWV7DEOH,WHPVDQG$VVHPEOHG9LHZVRQWKHQH[WSDJH
For Securing Hardware,
see the Parts Tables below
and on the next page,
under the item(s) desired.
SW. 21
9LHZ %DFN 6LGH 'URS 7DUJHW $FFHVV 3ODWH 5HIHUHQFH 'HFDO
For Target Replacement, only the 7 screws noted above need
to be removed from Item 11, Drop Target Access Plate.
1º
1
Qty. 2
,1',9,'8$/ 3$57 1$0(
Bracket, Main Housing 5-Bank D/T
47< 63, 3$57 1º
1
515-7380-00
Item 1 is secured below the playfield by: #8 X 1/2" SHWH AB (Zinc) (Qty. 6) (234-5101-00)
TARGET HEIGHT ADJUSTMENT HARDWARE : #8-32 X 3/4" SHWH MS (Zinc) (Qty. 2)
(237-6010-00) and #8-32 Keps Nuts (Qty. 2) (240-5104-00)
:
Qty. 5
2
Bracket, Coil Support (Upper)
1
535-9434-00
Item 2 is secured to Item 1 by: #8-32 X 3/8" SHWH (Ser, Zinc) Wax (Qty. 2) (237-5975-00)
3
4
5
6
Bracket, Coil Support (Lower)
Plunger
Plunger Head (Detachable)
Bracket, Lift Plate
1
1
1
1
535-9430-00
530-5410-01
530-5511-00
535-9431-00
Item 6 is secured to Item 5 into Item 4 by: #10-32 X 1/2" PPH MS Ext. Sems (Zinc)
(Qty. 1) (232-5402-00)
Qty. 5
7
Bracket, Lift Plate Attachment
1
535-9440-00
Item 7 is secured to Item 6 by: #8-32 X 1/2" SHWH (Ser, Zinc) Wax (Qty. 2) (237-5975-01)
#8 Washer (Qty. 2) (242-5005-00) and #8-32 Nylon Stop Nut (Qty. 2) (240-5102-00)
8
Coil, 24-940
1
090-5036-00B
Coil has a Diode (1N4004) (112-5003-00) positioned @ the bottom (below the lugs).
9
10
Coil Sleeve (Formost #10-7077)
Spring Washer (17/32" ID X 3/4" X 1")
1
1
545-5076-01
269-5002-00
6HF'UDZLQJV
Parts Table (Items 11-17) Continued on the next page.
Qty. 5
See the Drop Target Height Adjustment
Procedure on the next page.
Qty. 5
TARGET
HEIGHT
ADJUSTMENT
SCREWS
5HI$
5HI$
([SORGHG 9LHZ
)URQW 6LGH
For Securing Hardware,
see the Parts Tables above
and on the next page,
under the item(s) desired.
4
Assembly Reference Only:
515-7377-00 (Items 1-2)
515-7374-00 (Items 4-6)
6HFWLRQ&KDSWHU
3DJH
'UDZLQJVIRU0DMRU
$VVHPEOLHV5DPSV
%DQN'URS7DUJHW
$VVHPEO\
,WHPV&RQWLQXHG
$VVHPEOHG
9LHZ
%DFN 6LGH
Item 15
Qty. 5
3DUWV7DEOH,WHPV
DQG([SORGHG9LHZ
RQSUHYLRXVSDJH
'URS7DUJHW+HLJKW
$GMXVWPHQW3URFHGXUH
Item 1
With the Drop Targets (Item 15) in
the D O W N P O S I T I O N, adjust
the height of the Targets so the Drop
Targets are "flush to slightly above"
the playfield surface after replacing
any target. This will ensure a BALL
TRAP is n o t c r e a t e d where
the ball can rest in the target hole
area above the playfield.
Using a 1/4" Nut Driver, Flat Screw
Driver and/or Adjustable Wrench,
loosen the #8-32 Keps Nuts and turn
in or out the Screws to raise or lower
the Target Lift Plate Attachment
Bracket (Item 7 or Ref. A) causing
the Drop Targets to reach desired
height as stated above. Tighten the
Keps Nut to secure in place.
$VVHPEOHG
9LHZ
)URQW 6LGH
6
Item 12
SW.
21
Item 16
Item 11
SW.
20
6
Item 12
SW.
19
SW.
18
SW.
17
Item 11
9 Item 13
Qty. 5
Item 1
5HI$
For Securing Hardware,
see the Parts Tables below
and on the previous page,
under the item(s) desired.
Item 15
Qty. 5
TARGET HEIGHT
ADJUSTMENT SCREWS
5HI$
47< 63, 3$57 1º
1º ,1',9,'8$/ 3$57 1$0(
Parts Table (Items 1-10) on the previous page.
11
Bracket, Access (Back) Plate 5-B. D/T
1
535-9439-00
Item 1
12
Bracket, Dual Switch Support
2
535-9433-00
Item 12 is secured to Item 11 by: #8-32 X 3/8" SHWH (Ser, Zinc) Wax (Qty. 2/per)
(237-5975-00)
9
Item 11
13
Switch (D/T)
5
180-5158-00
Item 13 is secured to Items 11 & 12 by: #4-40 X 5/8" HWH TF (Qty. 2/per) (237-5945-00)
Ordering Note: If replacing Item 13, Switch (D/T), ensure the diode on the switch is
desoldered (if present) and wired correctly as per original (more details on Page 105).
14
15
16
Item 2
Items
8&9
6
Item 17
Qty.
5
Item 3
1
5
1
266-5020-00
545-6102-01
802-5000-84
Note: Individual Decals (820-6356-DT, 820-6361-00 (Qty. 5)) are not available individually,
ordering of kit is required. For all pieces, see Playfield - Plastics (Screened & Clear) &
Decals, Page 67.
SW. 21
4
Compression (Return) Spring
Drop Target White (Rollover)
Kit: Decals (Screened) -DT & Targets
17
Spring, Target Reset
5
265-5003-00
Ordering Note: If 500-6795-00 is unavailable, order the individual part(s) actually required.
!
!
7DNH1RWH
Coil Note: Either -00B or -00T can be used for coil replacements.
B/T listed is preferable for easier diode access & may differ on game.
Items
4 & 14
Item 5
Item 6
TARGET
HEIGHT
ADJUSTMENT
SCREWS
5HI$
Item 7
Item 1
'UDZLQJVIRU0DMRU
$VVHPEOLHV5DPSV
6HF'UDZLQJV
Item 11 is secured to Item 1 by: #8-32 X 3/8" SHWH (Ser, Zinc) Wax (Qty. 5)
(237-5975-00) and Item 11 is secured below the playfield by: #8 X 1/2" SHWH AB (Zinc)
(Qty. 2) (234-5101-00) Cable Dressing: 1/4" Clamp (Single) (Qty. 1) (040-5000-03)
DOTS: The Switch Diodes, 1N4001, are not located on this Assembly.
They are located on a Terminal Strips under the playfield near this
assembly. See Section 5, Chapter 2, Playfield Terminal Strips ... ,
Page 105, for more details. If reordering, ensure the diode on each
switch is desoldered, if present, and wired correctly as per original
(more details on Page 105).
Cable Wiring Harness
036-5500-18-84
9-Pin Connector
045-5007-09
Polarizing Key
060-5000-00
6HFWLRQ&KDSWHU
3DJH
%DOO(MHFW%RWWRP$VVHPEO\
,WHPV
%DOO(MHFW7RS/HIW6W\OH$VVHPEO\
,WHPV
DQG$VVRFLDWHG3DUWV6HH3DUWV7DEOHEHORZ
$3
&
$3
$
For Securing Hardware, see
the Parts Table below,
under Item desired.
$3
'
SW. 34
$3
%
4
1º (-(&7 %27720 3$57 1$0(
1
Coil Bracket & Stop Assembly
47< 63, 3$57 1º
1
515-5011-00
Item 1 is secured below the playfield by: #6 X 1/2" SHWH AB Red (Zc.) (Qty. 4) (234-5001-02)
2
Coil Retaining Bracket
1
535-5203-03
Item 2 is secured by to Item 1 by: #8-32 X 1/4" PPH MS (Sems) Zc. (Qty. 2) (232-5300-00)
3
Coil, 24-940
1
090-5036-00B
6HF'UDZLQJV
Coil has a Diode (1N4004) (112-5003-00) positioned @ bot. (below lugs opposite windings).
4
Coil Sleeve
1
545-5031-00
1º (-(&7 /()7 723 3$57 1$0( 47< 63, 3$57 1º
5
Plunger & Link Assembly
1
515-5338-00
Item 5 is secured to Item 8 by: Retaining Ring, 1/4" ø Shaft (Qty. 1) (270-5002-00)
For Individual Items use : Plunger 2" Lg. (530-5025-01), Plunger Link (545-5293-00) and
Roll Pin 1/8" ø x 5/8" Lg. (251-5008-00)
Ordering Note: If 515-5338-00 (Item 5) is unavailable, order the individual part(s) required.
6
Fulcrum Bracket (LEFT)
1
535-6446-01
Item 6 is secured below the playfield by: #6 X 1/2" SHWH AB Red (Zc.) (Qty. 3) (234-5001-02)
7
Fulcrum Pin
1
530-5207-00
Item 7 is secured through Items 8 & 10 by: Washer (.265" x 1/2" X .047" SS) (Qty. 1)
(242-5060-00) and Retaining Ring, 1/4" ø Shaft (Qty. 1) (270-5002-00) as shown.
8
9
10
Spring Plate (LEFT) Assembly
Spring, Reset Armature
Cam Bracket (LEFT) Assembly
1
1
1
515-5009-00
265-5001-00
515-5042-00
ASSOCIATED PARTS ARE NOT INCLUDED WITH THE ABOVE ASSEMBLY.
1º $662&,$7(' 3$57 1$0(
AP-A Compression (Relay) Spring (on Plunger)
AP-B Switch Assembly
Assembly Reference Only:
500-6819-00 =
515-7447-00 (1-4) +
515-7448-00 (5-10) +
266-5000-00 (AP-A)
47< 63, 3$57 1º
1
1
266-5000-00
500-6520-00
For Individual Items use : Switch Bracket (535-6173-00), Micro Switch (180-5186-00),
Switch Body Protect Plate (535-6539-00), Diode 1N4004 (112-5003-00), #2-56 X 1/2" Unslt.
Serr. HWH #4 Hd.TR3 (Qty. 2) (237-5937-02) and #2-56 Hex Nut (Qty. 2) (240-5301-00)
AP-C Eject Hole Base - Red (Modified)
1
545-5060-02-84
Items AP-B & -C are secured P/F by: #6 X 1/2" Red (Zinc) (Qty. 2/per) (234-5001-02)
AP-D Bracket, Support (for Item AP-C)
1
535-9484-00
Item AP-D is secured below the P/F by: #8-32 Nylon Stop Nut (Qty. 1) (240-5102-00) and
#6 X 1/2" Red (Zinc) (Qty. 1) (234-5001-02)
6HFWLRQ&KDSWHU
3DJH
'UDZLQJVIRU0DMRU
$VVHPEOLHV5DPSV
%DOO(MHFW%RWWRP$VVHPEO\,WHPV
%DOO(MHFW7RS5LJKW6W\OH$VVHPEO\,WHPV
DQG$VVRFLDWHG3DUWV6HH3DUWV7DEOHEHORZ
Assembly Reference Only:
500-6819-01 =
515-7447-00 (1-4) +
515-7448-01 (5-10) +
266-5000-00 (AP-A)
$3
$3
%
&
SW. 32
For Securing Hardware, see
the Parts Table below,
under Item desired.
1º (-(&7 %27720 3$57 1$0(
1
Coil Bracket & Stop Assembly
47< 63, 3$57 1º
1
515-5011-00
Item 1 is secured below the playfield by: #6 X 1/2" SHWH AB Red (Zc.) (Qty. 4) (234-5001-02)
2
Coil Retaining Bracket
1
535-5203-03
Item 2 is secured by to Item 1 by: #8-32 X 1/4" PPH MS (Sems) Zc. (Qty. 2) (232-5300-00)
3
Coil, 24-940
1
090-5036-00B
$3
$
Coil has a Diode (1N4004) (112-5003-00) positioned @ bot. (below lugs opposite windings).
Coil Sleeve
1
545-5031-00
1º (-(&7 5,*+7 723 357 1$0( 47< 63, 3$57 1º
5
Plunger & Link Assembly
1
4
515-5338-00
Item 5 is secured to Item 8 by: Retaining Ring, 1/4" ø Shaft (Qty. 1) (270-5002-00)
For Individual Items use : Plunger 2" Lg. (530-5025-01), Plunger Link (545-5293-00) and
Roll Pin 1/8" ø x 5/8" Lg. (251-5008-00)
Ordering Note: If 515-5338-00 (Item 5) is unavailable, order the individual part(s) required.
6
Fulcrum Bracket (RIGHT)
1
6HF'UDZLQJV
4
535-6446-02
Item 6 is secured below the playfield by: #6 X 1/2" SHWH AB Red (Zc.) (Qty. 3) (234-5001-02)
7
Fulcrum Pin
1
530-5207-00
Item 7 is secured through Items 8 & 10 by: Washer (.265" x 1/2" X .047" SS) (Qty. 1)
(242-5060-00) and Retaining Ring, 1/4" ø Shaft (Qty. 1) (270-5002-00) as shown.
8
9
10
Spring Plate (RIGHT) Assembly
Spring, Reset Armature
Cam Bracket (RIGHT) Assembly
1
1
1
515-5009-01
265-5001-00
515-5042-01
For Securing
Hardware,
see the Parts
Table Left,
under Item
desired.
ASSOCIATED PARTS ARE NOT INCLUDED WITH THE ABOVE ASSEMBLY.
1º $662&,$7(' 3$57 1$0(
AP-A Compression (Relay) Spring (on Plunger)
AP-B Switch Assembly
47< 63, 3$57 1º
1
1
266-5000-00
500-6520-00
For Individual Items use : Switch Bracket (535-6173-00), Micro Switch (180-5186-00),
Switch Body Protect Plate (535-6539-00), Diode 1N4004 (112-5003-00), #2-56 X 1/2" Unslt.
Serr. HWH #4 Hd.TR3 (Qty. 2) (237-5937-02) and #2-56 Hex Nut (Qty. 2) (240-5301-00)
AP-C Eject Hole Base - Red
1
545-5060-02
Items AP-B & -C are secured P/F by: #6 X 1/2" Red (Zinc) (Qty. 6) (234-5001-02)
'UDZLQJVIRU0DMRU
$VVHPEOLHV5DPSV
6HFWLRQ&KDSWHU
3DJH
+RXQG'RJ3RS8S7DUJHW
,QGLYLGXDO3DUWV2QO\,WHPV
Item 8
For Securing Hardware, see
the Parts Table below,
under Item desired.
Item 7
Assembly Reference Only:
500-6781-00 (1-10)
Item 2
Item 10
47< 63, 3$57 1º
1º ,1',9,'8$/ 3$57 1$0(
1
Bracket, Hound Dog Base
1
515-7365-00
Item 1 is secured below the playfield by: #8 Washer (Qty. 3) (242-5005-00) and
#8-32 Nylon Stop Nut (Qty. 3) (240-5102-00)
2
3
Actuator Bracket
Clevis Pin 3/16" ø S.S.
1
1
535-9428-00
530-5657-00
Item 3 is secured through Items 1 & 2 by: Retaining Ring, 3/16" ø Shaft (Qty. 1)
(270-5024-00).
4
Micro Switch (Short Flat Actuator)
1
180-5190-28
Switch has a Diode (1N4004) (112-5003-00). Can be replaced with (1N4001) (112-5001-00).
Kit: Plastics (Screened) -30
Note: Individual Plastics (830-6029-30) is not available individually, ordering of kit is
required. For all pieces, see Playfield - Plastics (Screened & Clear) & Decals, Page 67.
5
6
Switch Body Protect Plate
1
803-5000-84
1
535-6539-00
Items 5 & 6 are secured to Item 1 by: #2-56 X 1/2" Unslt. Serr. HWH #4 Hd.TR3 (Qty. 2)
(237-5937-02)
6HF'UDZLQJV
SW. 64
7
Square Post (Black)
1
535-9443-00
Item 7 is secured to Item 1 by: #6-32 x 1/2" PPH MS Ext. Sems (Zinc) (Qty. 2)
(232-5202-00)
8
Hound Dog
1
500-6820-00
Item 8 is secured to Item 7 by: Washer, 1/4" I.D. X 7/8" O.D. X 1/8" Black (Qty. 1)
(242-5016-00) and #8-32 X 3/8" PPH MS Sems (Black) (Qty. 1) (232-5301-01)
9
10
Spring Tension H/D
Deflector Pad (Bumper)
1
1
266-5080-00
545-5428-00
For Securing Hardware, see
the Parts Table above Right,
under Item desired.
6HFWLRQ&KDSWHU
3DJH
Cable Wiring Harness
036-5500-07-84
2-Pin Connector
045-5007-02
Shrink Tubing
605-5002-00
'UDZLQJVIRU0DMRU
$VVHPEOLHV5DPSV
0DJQHW&RLO%UDFNHWZLWK7KUHDGHG%XVKLQJDQG0LVFHOODQHRXV3DUWV,WHPV
:KHQHQHUJL]HGKROGVWKHEDOODERYHWKH8SSHU5LJKW)OLSSHUDQGWKHQUHOHDVHVLW
1º ,1',9,'8$/ 3$57 1$0(
1
Magnet Coil, 22-650 (6" Leads + Conn.)
47< 63, 3$57 1º
1
500-6808-00
Coil has a Diode (1N4004) (112-5003-00) located in the Connector.
For Individual Items use : Magnet Coil (22-650) (090-5042-00), 1 X 2, .093" Connector
Plug 03-09-2022 (045-5004-02), Insulating Tubing (605-5001-00) (Qty. .08 Ft.) and
Male Lugs 18ga (Qty. 2) (055-5021-09)
1º ,1',9,'8$/ 3$57 1$0(
2
Bracket, Mag. Core Mount (Threaded Bushing)
47< 63, 3$57 1º
1
515-6141-02
Item 2 is secured to the playfield by: #8 X 1/2" SLT SHWH AB (Zinc) (Qty. 4) (234-5101-00)
3
4
Threaded Core Plug
3/4-16 Hex Nut
1
1
530-5320-00
240-5315-00
4
%DOO/RFN$VVHPEO\,WHPV
:KHQHQHUJL]HGWKHSRVWJRHVGRZQEHORZWKHSOD\ILHOGDOORZLQJWKHORFNHGSLQEDOOVWRHVFDSH
For Securing Hardware, see
the Parts Table below,
under Item desired.
6HF'UDZLQJV
Qty. 2
1º ,1',9,'8$/ 3$57 1$0(
1
Ball Lock Mounting Bracket Assembly
47< 63, 3$57 1º
1
515-7132-00
Item 1 is secured below the playfield by: #8 X 1/2" SHWH AB (Zinc) (Qty. 3) (234-5101-00)
4
2
Coil Retaining Bracket
2
535-5203-03
Item 2 is sec. to Item 1 by: #8-32 X 1/4" PPH MS (Sems) Zinc (Qty. 2/per) (232-5300-00)
3
Coil, 23-800
1
090-5001-00T
Coil has a Diode (1N4004) (112-5003-00) positioned @ top (above lugs next to windings).
Coil Sleeve thru Coil
4
5
6
7
8
9
Coil Sleeve
Spring Washer (17/32" ID X 3/4" X 1")
Solid Plunger Assembly (Short)
Compression (Relay) Spring
Nyliner 7/16" Shaft (7L2-FF)
Retaining Ring, 7/16" ø Shaft
1
1
1
1
1
1
545-5411-00
269-5002-00
515-6119-02
266-5020-00
545-5418-01
270-5005-00
Ordering Note: If 500-5867-07 is unavailable, order the individual part(s) actually required.
'UDZLQJVIRU0DMRU
$VVHPEOLHV5DPSV
6HFWLRQ&KDSWHU
3DJH
(OYLV6WHSSHU0RWRU%DQN6WDQG8S7DUJHW
,QGLYLGXDO3DUWV2QO\,WHPV
For Securing Hardware, see
the Parts Table on the next
page, under Item desired.
3DUWV7DEOHDQGPRUHYLHZVFRQWLQXHRQWKHQH[WSDJH
([SORGHG
9LHZV
Foam
Pad
SW. 39
(OYLV• .LW
SW. 38
SW. 37
Š
Item 22®
Item 22®
SW. 36
Item 22®
Includes Items 21, 26-31 &
Securing Hardware
Note: For just the Torso (Item 30)
and Pivot Pin (Item 21) use
502-6796-84T (add the T to PN).
SW. 36
Item 22®
Qty. 4
9 $VVHPEOHG
9LHZ
Q25Q28
Š
Item
10
Item 3
Item 1
Item
11
Item 7
Qty. 2
Item
6
6HF'UDZLQJV
Cable Wiring Harness for
Switch & Targets : 036-5500-17-84
10-Pin Connector : 045-5007-10
2-Pin + 3-Pin Connectors : 045-5003-02 + -03
Shrink Tubing : 605-5003-00 (.08 ft.)
Item 1
5 $VVHPEOHG
9LHZV :
SW. 33
For Securing Hardware, see
the Parts Table on the next
page, under Item desired.
Assembly Reference Only:
500-6796-00 (1-31)
515-7385-00 (1-5)
500-6799-00 (6-21)
515-7386-00 (13-15)
515-7391-00 (13-14 & 16)
500-6817-00 (22R, 23-25 +
036-5500-17-84 Wiring)
515-7402-00 (23-25)
515-7395-00 (26-27)
Kit 502-6796-84 (21, 26-31)
Kit 502-6796-84T (21, 30)
Item 5
([SORGHG 9LHZ
9 ([SORGHG
5
9LHZ
Item 3
4" Cable Ties :
040-5001-01
6HFWLRQ&KDSWHU
3DJH
4
4
Q25-Q28
Item 1
Item 3
'UDZLQJVIRU0DMRU
$VVHPEOLHV5DPSV
(OYLV6WHSSHU0RWRU
%DQN
6WDQG8S7DUJHW
,QGLYLGXDO3DUWV2QO\
,WHPV
&RQWLQXHG
([SORGHG
9LHZ
6
47< 63, 3$57 1º
1º
,1',9,'8$/ 3$57 1$0(
1
Frame (Bracket Base) Welded Asm.
1
515-7390-00
Item 1 is secured below the playfield by: #8 X 1/2" SHWH AB (Zinc) (Qty. 6) (234-5101-00)
5e " X 3e " Plastic Spacer Gray
8
8
Item 2 is secured to Item 1 by: #6-32 X 1" PPH MS Ext. Sems (Zinc) (Qty. 1/per)
(232-5206-00) and #6-32 Keps Nut (Qty. 1/per) (240-5008-00)
2
3
Stepper Motor Assembly
3
254-5000-14
1
500-6809-00
For Individual Items use : Stepper Motor (Haydon #46868-12-002 12v DC 10W) (041-5089-00),
7-Pin Connector (28 AWG MT End, CE100F28-7) (045-5157-07), 7-Pin Z-Header (MWWS100-2207)
(045-5110-07), Polarizing Key (060-5000-01) and Shrink Tubing (.4 ft.) (605-5004-01)
Item 3 is secured to Item 1 by: #6-32 X 5/16" PPH MS Ext. Sems (Zinc) (Qty. 2) (232-5208-00)
([SORGHG
9LHZ
6
4
Stepper Motor Threaded Shaft (7.25")
1
530-5658-00
Item 4 is sec. to Item 6 by: #8-32 X 3/16" Set-Screw (MMC 91375A189) (Qty. 2) (237-6153-00)
Item 16
(For Arms)
5
6
7
Insulator (Fiche Paper) 1" X 4.75"
Frame (Carrier) Welded Assembly
Wear Pad
1
1
2
545-6116-00
515-7384-00
545-6103-01
Item 7 is sec. to Item 6 by: #8-32 X 1/4" PFH 82° U/cut MS (Zc.) (Qty. 2/per) (237-6030-02)
8
Item 15
(For Legs)
Coil (29-1400) & 2-Pin Conn. Asm.
1
500-6818-00
Coil has a Diode (1N4004) (112-5003-00) located in the Connector.
For Individual Items use : Coil (Med. Bobin) 29-1400 (TMI 4955-0 T543950) (090-5072-03),
2-Pin Conn. (.093 03-09-2022) (045-5004-02) and Male Lugs 18AWG (055-5021-09)
9
Coil (29-1400) & 3-Pin Conn. Asm.
1
500-6818-01
Coil has a Diode (1N4004) (112-5003-00) located in the Connector.
For Individual Items use : Coil (Med. Bobin) 29-1400 (TMI 4955-0 T543950) (090-5072-03),
3-Pin Conn. (.093 03-09-2032) (045-5004-03) and Male Lugs 18AWG (055-5021-09)
10
11
Dual Actuator Bracket
Dual Coil Retainer Bracket
1
1
535-9450-00
535-9462-00
Items 10 / 11 sec. to Item 6 by: #8-32 X 1/4" SSHWH SW (Zc.) Wax (Qty. 2/per) (237-5975-04)
9 ([SORGHG
9LHZV 6
Š
Item
14
For Securing
Hardware, see the
Parts Table Right,
under Item desired.
13
14
15
16
Plunger
Plunger Bracket Welded Assembly
Actuator Wire (for Legs)
Actuator Wire (for Arms)
17 Compression (Return) Spring
18® Platform Riveted Assembly
Item 13
Item 13
:
1
515-7389-00
2
2
1
1
530-5659-00
515-7387-00
535-9452-00
535-9451-00
Items 15 & 16 are secured to Items 13 & 14 by: #8 Fiber Washer (MC96100A125) 3/8" O.D.
(Qty. 1/per) (242-5082-00), #4-40 X 1/4" PPH MS Ext. Sems (Zinc) (Qty. 2/per)
(237-5909-00) and Retaining Ring, 5/32" ø Shaft (Qty. 1/per) (270-5025-00)
Items 15 & 16 are secured to Item 20 by: #8 Fiber Washer (MC96100A125) 3/8" O.D. (Qty.
1/per) (242-5082-00) and Retaining Ring, 5/32" ø Shaft (Qty. 1/per) (270-5025-00)
Item
14
$VVHPEOHG
9LHZV
Dual Coil Stop Plate (Bottom) Asm.
2
1
266-5077-00
515-7388-00
7DNH1RWH
® "R" indicates Item noted is secured with
rivet(s) as listed.
Qty. 2
For Individual Items use : Platform Support Bracket (535-9454-00), Support Channel
(535-9448-00) and Rivet, 1/8" ø X 3/16" Lg. (Black Zinc) (Qty. 2) (249-5001-01)
Item 18 is sec. to Item 10 by: #6-32 X 1/4" SHWH SW (Zinc) Wax (Qty. 2) (237-5976-01)
19
Bearing Block (behind Elvis• Torso)
1
545-6105-00
Item 19 is sec. to Item 18® by: #4-40 X 1/4" PFH MS Black Oxide (Qty. 2) (237-5983-02)
20 Lever Assembly
21 Pivot Pin (for Arms)
22® 1" Sq. S/U Target (Side-Lugs, No Brkt)
515-7393-00
530-5663-00
515-7381-00
For Individual Items use : Stand-Up Target, Side Lugs (180-5083-01), 1" Sq. Target Top
White (545-5470-08), Washer 9/64" I.D. X 5/16" O.D. X 1/32" (242-5017-00), Rivet, 1/8" ø X
3/16" Lg. (Zinc) (249-5001-00) and Foam Pad (Adhesive, Sq., Black) (626-5029-00)
Item 22® is secured to Item 1 by: #6-32 Nylon Stop Nut (Qty. 2/per) (240-5005-00)
Qty. 2
23
Switch Bracket
1
535-9463-00
Item 23 is sec. to Item 1 by: #6-32 X 1/4" SHWH SW (Zinc) Wax (Qty. 2) (237-5976-01)
4
4
2
1
4
24
Micro Switch (Short Actuator, Bend)
1
180-5189-00
Switch has a Diode (1N4004) (112-5003-00). Can be replaced with (1N4001) (112-5001-00).
Qty. 2
25
Switch Body Protect Plate
1
535-6539-00
Items 24 / 25 sec. to Item 23 by: #2-56 X 1/2" SHWH #4 Hd.TR3 (Qty. 2) (237-5937-02)
26
Pivot Pin & Plate Asm. (for Legs)
1
515-7394-00
Item 26 is secure through Items 18® & 20 by: #4-40 X 1/4" PPH MS Ext. Sems (Zinc)
(Qty. 1) (237-5909-00) and #4 Washer (Qty. 1) (242-5002-00)
27
Elvis• Legs (Molded Plastic)
1
545-6107-00
Item 27 is sec. to Item 26 by: #4-40 X 1/4" PFH Blk. Oxd. U/Cut 82° (Qty. 2) (237-5983-04)
28
29
5.5" Cable Ties :
040-5001-02
Elvis• Right Arm (Molded Plastic)
Elvis• Left Arm (Molded Plastic)
1
1
545-6109-00
545-6110-00
Items 28 & 29 are secured to Item 21 by: #4-40 X 3/8" PTH Blk. (Qty. 1/per) (237-6154-01)
30
Elvis• Torso (Molded Plastic)
1
545-6108-00
Item 30 is sec. to Item 18® by: #6-32 X 3/8" HWH Swage (Ser.) Zinc (Qty. 1) (237-5976-02)
([SORGHG 9LHZ
'UDZLQJVIRU0DMRU
$VVHPEOLHV5DPSV
5
31
Not
Shown
Spacer Black 31" OD X .26" ID X .28" (in Rt. Arm)
Kit: Decals (Screened) -80 -81
1
1
545-6106-00
802-5000-84
Note: Individual Decals (820-6356-XX) are not available individually, ordering of kit is
required. For all pieces, see Playfield - Plastics (Screened & Clear) & Decals, Page 67.
6HFWLRQ&KDSWHU
3DJH
6HF'UDZLQJV
12
Item 12 is sec. to Item 6 by: #8-32 X 3/8" SHWH SW (Zinc) Wax (Qty. 2) (237-5975-00)
+RWHO3ODVWLFV'HFDO5HIHUHQFH
,WHPV,QFOXGHGLQ.LW
3ODVWLFV
'HFDOV
+RWHO'RRU&RLO$VVHPEO\
,WHPV
3DUWV7DEOH:
IRUWKLV$VVHPEO\
RQWKHQH[WSDJH
%UDFNHWV1RW,QFOXGHG
$VVHPEO\5HIHUHQFH2QO\
&RYHUVWKH+RWHO)UDPHRQWKHQH[WSDJH
9
Reference E: The Actuator
Arm (Item 6) attaches to
Door Pin (Item 3, next
page), with 1 Fiber
Washer on each side and
1 Retaining Ring.
47< 63, 3$57 1º
1º ,1',9,'8$/ 3$57 1$0(
1
E
Bracket, 90°
6
535-8941-04
Item 1 is secured to Item 2’s by: Rivet, 1/8" ø X 3/16" Lg. (Qty. 2/per) (249-5001-00)
Replacing Plastics requires drilling out the rivets. If capable, use the rivets stated
above or reassemble with an appropriate size screw and nut.
2
Kit: Plastics (Screened & Clear)
1
For Securing
Hardware, see the
Parts Table on the
next page, under the
item desired.
803-5000-84
Note: Individual Plastics (830-6029-XX, 830-6030-35) are not available individually, ordering
of kit is required. For all pieces, see P/F - Plastics (Screened & Clear) & Decals, Page 67.
Kit: Decals (Screened) -83.
Note: Individual Decal (820-6356-83) is not available individually, ordering of kit is required.
For all pieces, see P/F - Plastics (Screened & Clear) & Decals, Page 67.
3
1
802-5000-84
For Securing Hardware,
see the Parts Tables above,
under the item desired.
Qty. 2
Qty. 5
Screened
Plastic -28
Qty. 6
4
Screened
Plastic
-27
6HF'UDZLQJV
5
Screened
Plastic
-35
Screened
Plastic
-31
Screened
Plastic
-29
5
Assembly Reference Only:
500-6832-00 (1-3)
Decal
-83
5
Reference: Secures to Metal Frame (Hotel) Outer & Inner.
Securing hardware under Items 1 and 2 (see next page).
<UPDATED AFTER MANUAL PRINTING> 112204
6HFWLRQ&KDSWHU
3DJH
'UDZLQJVIRU0DMRU
$VVHPEOLHV5DPSV
+RWHO'RRU&RLO$VVHPEO\,WHPV&RQWLQXHG
9$VVHPEO\9LHZRQSUHYLRXVSDJH$FWXDWRU$UP,WHP&RQWUROV+RWHO'RRU,WHPEHORZ 47< 63, 3$57 1º
1º ,1',9,'8$/ 3$57 1$0(
1
Coil Mounting Bracket Assembly
1
515-7132-00
Item 1 is sec. below the playfield by: #8 X 1/2" SHWH AB (Zinc) (Qty. 3) (234-5101-00)
2
Coil Retaining Bracket
2
Coil, 27-1500
1
535-5203-03
090-5004-00B
Coil has a Diode (1N4004) (112-5003-00) positioned @ bot. (below lugs opposite windings).
4
5
Coil Sleeve
Plunger Assembly
1
1
6
Actuator Arm
1
535-9478-00
1
1
1
1
266-5047-00
242-5081-00
270-5005-00
545-5418-01
Item 6 is secured to Item 5 by: Roll Pin, 1/8" ø X 5/8"
Item 2 is sec. to Item 1 by: #8-32 X 1/4" PPH MS (Sems) Zinc (Qty. 2/per) (232-5300-00)
3
47< 63, 3$57 1º
1º ,1',9,'8$/ 3$57 1$0(
545-5411-00
515-7409-00
7
8
9
10
Compression (Relay) Spring
Washer (Nylon) .75" O.D. X .44" I.D.
Retaining Ring, 7/16" ø Shaft
Nyliner 7/16" Shaft O.D. (7L2-FF)
Ordering Note: If 500-6752-01 is unavailable, order the individual part(s) actually required.
+RWHO)UDPH6WDQG8S7DUJHWV6ZLWFK,QGLYLGXDO3DUWV2QO\,WHPV
47< 63, 3$57 1º
1º ,1',9,'8$/ 3$57 1$0(
1
2
Metal Frame (Hotel) Outer
Metal Frame (Hotel) Inner
1
1
535-9475-00
535-9476-00
Items 1 & 2 are sec. above the P/F by: #8 X 1/2" SHWH AB (Zc) (Qty. 1/per) (234-5101-00)
Item 2 is secured to Item 1 (Reference " A " & " B " in drawing below) by: #8-32 X 5/8"
PPH MS Ext. Sems (Zinc) (Qty. 2) (232-5303-00), Washer 13/64" I.D. X 5/8" O.D. X .105" R-A
(Qty. 2) (242-5039-00) and #8-32 Nylon Stop Nut (Qty. 2) (240-5102-00)
Hotel Plastics (previous page) are secured to Items 1 and 2 respectively by:
#8-32 X 3/8" SHWH Swg. Ser. (Zinc) Wax (Qty. 1/per) (237-5975-01)
3
Metal Door (Hotel)
1
535-9477-00
Assembly Note (Reference " E " in drawing below & prev. page): The Actuator Arm
(Item 6, above & prev. page) attaches to Door Pin, with 1 Fiber Washer on each side.
Item 3 is sec’d @ Door Pin by: Fiber Washer 3/16" I.D. X 3/8" O.D. X .031" (MC95601A305)
(Qty. 2) (242-5083-00) and Retaining Ring, 3/16" ø Shaft (Qty. 2) (270-5001-00)
4
Hinge Pin (Grooved Rod)
1
1º ,1',9,'8$/ 3$57 1$0(
8 Foam Pad (Adhesive, Square Black)
9® 1" Sq. Stand-Up Target White
47< 63, 3$57 1º
2
2
Switch has a Diode (1N4004) (112-5003-00). Can be replaced with (1N4001) (112-5001-00).
For Individual Items use : Stand-Up Target (180-5133-00), 1" Square Target Top White
(545-5470-08), Washer 9/64" I.D. X 5/16" O.D. X 1/32" (242-5017-00) and Rivet, 1/8" ø X
3/16" Lg. (Zinc) (249-5001-00)
Kit: Plastics (Screened & Clear) -09
Note: Individual Plastic (830-6029-09) is not available individually, ordering of kit is required.
For all pieces, see Playfield - Plastics (Screened & Clear) & Decals, Page 67.
Item 10 is sec. to Item 1 and Item 2 (Ref. " C " in drwg. below) by: #8-32 X 1/2" SHWH
Swg. Ser. (Zinc) Wax (Qty. 2) (237-5975-01) and #8-32 Nylon Stop Nut (Qty. 2) (240-5102-00)
10
1
803-5000-84
Kit: Decals (Screened) -82, Hotel Dr.
Note: Individual Decals (820-6356-82, 820-6362-00) are not available individually, ordering
of kit is required. For all pieces, see P/F - Plastics (Screened & Clear) & Decals, Page 67.
11
530-5677-00
626-5029-00
515-5162-08
1
802-5000-84
Item 4 is secured through Item 3 by: Retaining Ring, 5/32" ø Shaft Truarc 5133-15
(Qty. 1/per side) (270-5021-15) and #8 Washer (Qty. 1, Right Side) (242-5005-00)
Micro Switch (Roller Actuator, Lite-Force)
Switch has a Diode (1N4004) (112-5003-00). Can be replaced with (1N4001) (112-5001-00).
5
6
Sw. Body Protect Plate
1
180-5119-02
1
535-6539-00
Items 5 & 6 are sec. to Item 2 by: #2-56 X 1/2" USHWH #4 Hd.TR3 (Qty. 2) (237-5937-02)
7
Switch Target Back Plate
2
535-6452-00
Item 7 is sec’d behind Item 9® to Item 1 by: #6-32 X 3/4" HWH Sw. Ser. (Zinc) (Qty. 2/per)
(237-5976-05)
® "R" indicates Item noted is
secured with rivet(s) as listed.
Cable Wiring Harness
036-5500-16-84
6-Pin Connector
045-5007-06
Shrink Tubing
605-5004-01 (1’) 605-5002-00 (.25’)
6
Decal
-82
SW. 63
Reference E:.
Lexan
Decal
Hotel Door
820-6362-00
9 Item 6,
For Securing Hardware,
see the Parts Table above,
under the item desired.
Actuator
Arm,
see previous page.
Qty. 2
SW. 52
Qty. 2
Qty. 2
Assembly Reference Only:
500-6813-00 (1-11)
'UDZLQJVIRU0DMRU
$VVHPEOLHV5DPSV
SW. 53
Screened
Plastic
-09
6HFWLRQ&KDSWHU
3DJH
6HF'UDZLQJV
7DNH1RWH
8SSHU3OD\ILHOG,QGLYLGXDO3DUWV2QO\,WHPV
47< 63, 3$57 1º
1º ,1',9,'8$/ 3$57 1$0(
1
2
Upper Playfield Plastic, Thick (Clear)
Flatrail (Upper Playfield)
1
1
545-6104-00
535-9410-00
Item 2 is secured to Item 1 by: #8-32 X 1/2 PPH MS Ext. Sems (Zinc) (Qty. 2)
(232-5302-00) and #8-32 Nylon Stop Nut (Qty. 2) (240-5102-00)
3
4
-34
Support Bracket, Left Wire Ramp
Support Bracket, Right Wire Ramp
1
1
535-9472-00
535-9473-00
Items 3 & 4 are secured to Item 1 by: #4-40 X 3/8" PFH MS Blk. Oxide (Qty. 2/per)
(237-5983-00) and #4-40 Nylon Stop Nut (Qty. 2/per) (240-5303-00)
5
6
Mini-Post MS / #10-32 Bot. .4" Thread
Post Hex Base #6-32 Tap/#10-32 Bot.
7
2
530-5005-01
530-5679-00
Items 5 & 6 are secured to Item 1 by: #10-32 Nylon Stop Nut (Qty. 1/per) (240-5203-00)
Qty. 7
7
8
9
10
Qty. 2
Rubber Ring, White, 7/16" I.D.
Rubber Ring, White, 2.5" I.D.
Rubber Ring, White, 3.0" I.D.
Kit: Plastics (Clear) -34
1
1
1
1
545-5348-68
545-5348-59
545-5348-60
803-5000-84
Note: Individual Plastic (830-6030-34) is not available individually, ordering of kit is required.
For all pieces, see Playfield - Plastics (Screened & Clear) & Decals, Page 67.
Item 10 is sec. to Item 6 by: #6-32 X 3/8" PPH MS Ext. Sems (Zinc) (Qty. 2) (232-5201-00)
6HF'UDZLQJV
[
Included in Spare
Parts Bag (Cash Box):
1.5" I.D. Rubber Ring
(545-5348-57) and
7/16" O.D. Rubber Ring
(545-5348-67)
S
Note: For
proper game
play, ensure
Item 8, 2.5"
I.D. Rubber
Ring, blocks
this exit
Note: Locations
where skilled players
are many, the optional
1.5" I.D. & 7/16" O.D.
Rubber Rings should
be used instead. See
Info Sheet, 756-5019-84
(included with this
game) for better view.
S
Note: See Info
Sheet, 756-5019-84
(included with this
game) for Detailed
Rubber Ring
Explanation and
better view
T
TTTTTT
6HFWLRQ&KDSWHU
3DJH
For Securing Hardware,
see the Parts Table above,
under the item desired.
Assembly Reference Only:
500-6801-00 (1-10)
'UDZLQJVIRU0DMRU
$VVHPEOLHV5DPSV
9 For the Support Bracket, see
5LJKW6WHHO5DPS
5LJKW:LUH5DPS
,QGLYLGXDO3DUWV2QO\
,WHPV
SW. 45
%
Item 4 on the Previous Page.
$
SW. 28
For Securing Hardware, see
the Parts Table below, under
the item desired.
Also, reference A-C below.
Cable Wiring Harness
036-5500-05-84
2-Pin Connector
045-5007-02
Shrink Tubing
605-5002-00 (.5’)
7DNH1RWH
® "R" indicates Item noted is
secured with rivet(s) as listed.
Assembly Reference Only:
500-6803-00 (1-5)
Cable Wiring Harness
036-5500-02-84
2-Pin Connector
045-5007-02
Shrink Tubing
605-5002-00 (.75’)
&
For Securing Hardware, see
the Parts Table below, under
the item desired.
Also, reference D-E below.
Š
1º ,1',9,'8$/ 3$57 1$0(
1® Right Steel Ramp Riveted Assembly
47< 63, 3$57 1º
1
515-7396-00
For Individual Items use : Right Steel Ramp (No Parts) (515-7382-00), Ramp Flap (Right)
(535-9444-01), #6 Lock Washer (Qty. 2) (246-5000-00) and Rivet, 1/8" ø X 3/16" Lg. (Qty. 2)
(249-5001-00).
Item 1 is secured below the playfield by: #8-32 Nylon Stop Nut (Qty. 2) (240-5102-00)
and #8 Washer (Qty. 2) (242-5005-00) Item 1 is secured above the P/F: Ref. A-C below.
2
Ramp Gate Switch (Right)
1
500-6593-00
For Individual Items use : Gate Bracket (Left) (535-9171-00), Wire Form (535-9172-00),
Micro Switch (Qty. 1) (180-5190-28), #2-56 X 1/2" HWH Ser Black (Qty. 2) (237-5937-02),
Switch Body Protect Plate (Qty. 1) (535-6539-00), #2-56 Hex Nut (Qty. 2) (240-5301-00),
Switch Diode (1N4004) (Qty. 1) (112-5003-00)
Item 2 is sec’d to Item 1 by: #6-32 X 1/2" PPH MS Ext. Sems (Zinc) (Qty. 2) (232-5202-00),
#6 Washer (Qty. 2) (242-5001-00) and #8-32 Nylon Stop Nut (Qty. 2) (240-5102-00)
3
4
Rubber Bumper (Blue)
Bumper Holder Bracket
1
1
626-5057-01
535-9366-01
'
Item 4 is secured to Item 1 by: #4-40 X 5/16" PFH U/cut MS (Zinc) (Qty. 2) (237-6151-00)
Kit: Plastics (Clear) -32, -45
Note: Individual Plastics (830-6030-XX) are not available individually, ordering of kit is
required. For all pieces, see Playfield - Plastics (Screened & Clear) & Decals, Page 67.
5
6
Right Wire Ramp
1
803-5000-84
1
515-7407-00
1
1
535-9375-00
180-5010-01
Item 6 is secured above the P/F: Reference D-E below.
7
8
Wire Form (Gate)
Micro Switch (1-5/8" Actuator)
Switch has a Diode (1N4004) (112-5003-00). Can be replaced with (1N4001) (112-5001-00).
9
Switch Body Protect Plate
1
535-6539-00
Items 8 & 9 sec’d to Item 6 by: #2-56 X 1/2" SHWH #4 Hd.TR3 (Qty. 2) (237-5937-02)
$
%
&
'
(
A = #6-32 X 3/8" PPH MS Ext. Sems (Zinc)
(232-5201-00) and #6-32 Keps Nut
(240-5008-00)
B = 2-5/8" X 1/4" Hex Spacer #6-32 Tap
(254-5008-08), #6 Washer (242-5001-00)
and #6-32 X 3/8" PPH MS Ext. Sems (Zinc)
(232-5201-00)
C = Above Tab to Plastic: 1-1/8" X 1/4" Hex
Spacer #6-32 Tap / #6-32 Threaded End
(254-5024-17) and #6-32 X 3/8" PPH MS
Ext. Sems (Zinc) (232-5201-00) Note: Other
Corner of Clear Plastic has #6-32 X 2-1/4"
PPH MS Zinc (237-5514-00), 1-15/16" X 3/8"
Plastic Spacer (Gry/Blk) (254-5000-15) and
below tab: 2-5/8" X 1/4" Hex Spacer #6-32
Tap (254-5008-08) & #6 Wshr (242-5001-00)
D = 2" X 1/4" Hex Spacer #6-32 Tap
(254-5008-07) and #6-32 X 3/8" PFH 82°
U/cut (237-5871-00)
E = #6-32 X 3" PPH MS Zinc (237-5515-00),
5/8" X 3/8" Plastic Spacer (Gry/Blk)
(254-5000-15), Washer, .187" I.D. X .875" X
.048" Zinc (242-5059-00), Washer, 13/64"
I.D. X 5/8" X .105" R-A (242-5039-00), .2" I.D.
X .625" O.D. X .058" (242-5038-00) and
#6-32 Nylon Stop Nut (240-5005-00)
Note: Hex Spacers are secured to the
Playfield by #6-32 X 7/8" Fin Shank Screw
BNT PT Zinc (237-5921-04).
'UDZLQJVIRU0DMRU
$VVHPEOLHV5DPSV
(
Assembly Reference Only:
500-6811-00 (6-9)
6HFWLRQ&KDSWHU
3DJH
6HF'UDZLQJV
/HIW:LUH5DPS/W6WHHO5DPS,QG3DUWV2QO\,WHPV &
3DUWV7DEOHRQWKHQH[WSDJH:
9 For the
Cable Wiring Harness (Switch)
036-5500-12-84
Cable Wiring Harness (Q31 Flash)
036-5500-25-84
2-Pin Connector
045-5007-02
Shrink Tubing
605-5002-00 (.75’)
Cable Wiring Harness (Lamps)
036-5500-19-84
2 X 3 Connector
045-5004-06
Shrink Tubing
605-5002-00 (.75’)
SW.
30
Support
Bracket,
see Item 3
on Page 94.
For Securing Hardware, see the Parts
Table at the top of the next page,
under the item desired.
Also, reference C-F below.
SW. 31
(
7RS
9LHZ6
'
)URQW
9LHZ6
'
Cable Wiring Harness
036-5500-05-84
2-Pin Connector
045-5007-02
Shrink Tubing
605-5002-00 (.5’)
)
Š
Q31
LAMP 69
$
LAMP 68
LAMP 67
Š
LAMP 66
Š
LAMP 65
Qty. 5
6HF'UDZLQJV
Qty. 4
Š
Š
Assembly Reference Only:
500-6804-00 (9-11)
For Securing Hardware, see the Parts Table at
the top of the next page, under the item desired.
Also, reference A-B at the right.
Š
Š
Qty. 4
$
%
&
%
'
(
Assembly Reference Only:
500-6810-00 (1-8)
6HFWLRQ&KDSWHU
3DJH
)
A = 2" X 1/4" Hex Spacer #6-32 Tap
(254-5008-07) and #6-32 X 3/8" PFH 82°
U/cut (237-5871-00)
B = #6-32 X 3" PPH MS Zinc (237-5515-00),
5/8" X 3/8" Plastic Spacer (Gry/Blk)
(254-5000-15), Washer, .187" I.D. X .875" X
.048" Zinc (242-5059-00), Washer, 13/64"
I.D. X 5/8" X .105" R-A (242-5039-00), .2" I.D.
X .625" O.D. X .058" (242-5038-00) and
#6-32 Nylon Stop Nut (240-5005-00)
C = Above Tab to Plastic: 1-1/8" X 1/4" Hex
Spacer #6-32 Tap / #6-32 Threaded End
(254-5024-17) and #6-32 X 3/8" PPH MS
Ext. Sems (Zinc) (232-5201-00) and below
tab: 2-5/8" X 1/4" Hex Spacer #6-32 Tap
(254-5008-08) & #6 Washer (242-5001-00)
D = 2-5/8" X 1/4" Hex Spacer #6-32 Tap
(254-5008-08) & #6 Washer (242-5001-00)
E = 2-3/4" X 1/4" Hex Spacer #6-32 Tap
(254-5008-15), #6 Washer (242-5001-00)
and #6-32 X 3/8" PPH MS Ext. Sems (Zinc)
(232-5201-00)
F = 2-1/4" X 1/4" Hex Spacer #6-32 Tap
(254-5008-18), #6 Washer (242-5001-00)
and #6-32 X 3/8" PPH MS Ext. Sems (Zinc)
(232-5201-00)
Note: Hex Spacers are secured to the
Playfield by #6-32 X 7/8" Fin Shank Screw
BNT PT Zinc (237-5921-04).
'UDZLQJVIRU0DMRU
$VVHPEOLHV5DPSV
/HIW:LUH5DPS/HIW6WHHO5DPS,WHPV,QGLYLGXDO3DUWV2QO\&RQWLQXHG
99LHZVRQSUHYLRXVSUHYLRXVSDJH
47< 63, 3$57 1º
1º ,1',9,'8$/ 3$57 1$0(
1
Left Wire Ramp
1
515-7406-00
Item 1 is secured above the P/F: Reference A-B at bottom of the previous page.
2
3
Wire Form (Gate)
Micro Switch (1-5/8" Actuator)
1
1
535-9375-00
180-5010-01
Switch has a Diode (1N4004) (112-5003-00). Can be replaced with (1N4001) (112-5001-00).
4
Switch Body Protect Plate
1
535-6539-00
Items 3 & 4 sec’d to Item 1 by: #2-56 X 1/2" SHWH #4 Hd.TR3 (Qty. 2) (237-5937-02)
Kit: Plastics (Screened) -21, -25
Note: Individual Plastics (830-6029-XX) are not available individually, ordering of kit is
required. For all pieces, see Playfield - Plastics (Screened & Clear) & Decals, Page 67.
5®
3-Lug Stand-Up Short Socket
6® #44 Bulb (Yellow)
7® Bracket, 90°
1
803-5000-84
5
077-5008-00
165-5053-06
535-8941-00
4
Items 5 & 7 are secured to Plastic -25 & Item 1 by: #6-32 X 3/8" PPH MS Ext. Sems
(Zinc) (Qty. 1/per) (232-5201-00) and #6-32 Keps Nut (Qty. 1/per) (240-5008-00)
7DNH1RWH
47< 63, 3$57 1º
1º ,1',9,'8$/ 3$57 1$0(
8®
Wedge Base Socket (Laydown)
Light Reflector (Silver Plastic)
#906 Bulb (Clear)
1
077-5026-01
545-5409-01
165-5004-00
Items 6-8 are sec’d to Plastics by: Rivet, 1/8" ø X 3/16" Lg. (Qty. 1/per) (249-5001-00)
9® Left Steel Ramp Riveted Assembly
1
515-7397-00
For Individual Items use : Left Steel Ramp (No Parts) (515-7383-00), Ramp Flap (Left)
(535-9444-00), #6 Lock Washer (Qty. 2) (246-5000-00) and Rivet, 1/8" ø X 3/16" Lg. (Qty. 2)
(249-5001-00).
Item 9 is sec’d below the P/F by: #8-32 Nylon Stop Nut (Qty. 2) (240-5102-00) and
#8 Washer (Qty. 2) (242-5005-00) Item 9® is sec’d above the P/F: Ref. C-F bot. prev. pg.
10
Ramp Gate Switch Assembly
1
515-6556-05
For Individual Items use : Gate Bracket (535-7756-02), Wire Form (535-6304-03), Micro
Switch (Qty. 1) (180-5087-00), #2-56 X 1/2" HWH Ser Black (Qty. 2) (237-5937-02), Switch
Body Protect Plate (Qty. 1) (535-6539-00), #2-56 Hex Nut (Qty. 2) (240-5301-00), Switch
Diode (1N4004) (Qty. 1) (112-5003-00)
Item 10 is secured to Item 9® by: #6-32 X 3/8" PPH MS Ext. Sems (Zinc) (Qty. 2)
(232-5201-00) and #8-32 Nylon Stop Nut (Qty. 2) (240-5102-00)
Kit: Plastics (Clear) -36 & 830-6032-00
Note: Individual Plastic (830-6030-36 & 830-6032-00) is not available individually, ordering
of kit is required. For all pieces, see P/F - Plastics (Screened & Clear) & Decals, Page 67.
11
® "R" indicates Item noted is secured with rivet(s) as listed.
1
803-5000-84
%DFN3DQHO,QGLYLGXDO3DUWV2QO\,WHPV
1º ,1',9,'8$/ 3$57 1$0(
1
2
3
4
5
Elvis Back Panel (Wood) No Parts
2-Lug Staple-Down Socket
#44 Bulb (Clear) Heavy Filament
3-Lug Laydown Socket (2 Lugs Bent)
#44 Bulb (Clear) Heavy Filament
2-Lug Stand-Up Short Socket
#89 Bulb (Clear) Heavy Filament
Mini-Mars (Clear)
Q20
Qty. 2
47< 63, 3$57 1º
1
525-5639-00
10 077-5000-00
165-5000-44-HF
9 077-5032-00
165-5000-44-HF
3 077-5032-00
165-5000-89-HF
1 550-5031-01
Q20
1º ,1',9,'8$/ 3$57 1$0(
Mini-Mars (Yellow)
Bracket, Back Panel & Playfield Mount
6
7
47< 63, 3$57 1º
1
2
550-5031-06
535-8964-00
Items 5 - 7 are sec’d to Item 1 by: #8 X 1/2" SHWH AB (Zinc) (Qty. 2/per) (234-5101-00)
Kit: Plastics (Screened)
8
1
803-5000-84
Note: Individual Plastics (830-6031-00) are not available individually, ordering of kit is
required. For all pieces, see Playfield - Plastics (Screened & Clear) & Decals, Page 67.
Not
Shown
1/4" & 1/2" Clamp (Single)
3
040-5000-XX
Above secured to Item 1 by: #6 X 1/2" SLT HWH AB (Red) (Qty. 1/per) (234-5001-02)
-XX Note: for 1/4" use -03 (Qty. 2); for 1/2" use -06 (Qty. 1);
G.I.
Q20
G.I.
G.I.
G.I.
G.I.
LAMP 60
G.I.
LAMP 62
LAMP 61
LAMP 61
LAMP 62
Q21
G.I.
G.I.
G.I.
LAMP 78
LAMP 60
Qty. 2
Q21
LAMP 78
Q21
G.I.
LAMP 77
Qty. 3
Qty. 10
G.I.
LAMP 76
Qty. 9
LAMP 77
G.I.
LAMP 76
LAMP 75
G.I.
LAMP 75
G.I.
G.I.
LAMP 74
LAMP 74
G.I.
G.I.
LAMP 73
Q20
Q20
G.I.
Q20
LAMP 73
G.I.
'UDZLQJVIRU0DMRU
$VVHPEOLHV5DPSV
6HFWLRQ&KDSWHU
3DJH
6HF'UDZLQJV
G.I.
???8.21/<237,21$/ ??? 8.21/<237,21$/ %DOO'HIOHFWRU$VVHPEOLHV
4W\,WHPV
1º ,1',9,'8$/ 3$57 1$0(
1
Ball Deflector Coil Mounting Bracket
47< 63, 3$57 1º
1
535-6857-02
Item 1 is secured below the playfield by: #8 X 1/2" HWH AB (Zinc) (Qty. 4) (234-5101-00)
2
Coil Retaining Bracket
1
535-5203-03
Item 2 is secured by: #8-32 X 1/4" PPH MS (Sems) Zinc (Qty. 2) (232-5300-00)
3
Coil, 26-1200
1
090-5044-00T
Coil has a Diode (1N4004) (112-5003-00) positioned @ top (above lugs next to windings).
4
5
6
7
8
Coil Sleeve (Short) (Formost #10-7077)
Spring Washer (17/32" ID X 3/4" X 1")
Solid Plunger Assembly
Compression (Relay) Spring
#10-32 Adj. Spindle Stop w/Rubber Tip
1
1
1
1
1
545-5076-01
269-5002-00
515-6858-00
266-5022-01
280-5014-00
Item 8 is secured by: #10-32 Keps Nut (Qty. 1) (240-5208-00)
Ordering Note: If 500-5788-02 is unavailable, order the individual part(s) actually required.
7DNH1RWH
! Coil Note: ! Either -00B or -00T can be
used for coil replacements. B/T listed is
preferable for easier diode access and
may differ on game.
7RS
9LHZ
8S'RZQ3RVW$VV\
,WHPV
1º ,1',9,'8$/ 3$57 1$0(
1
Up/Down Post Coil Mounting Bracket
47< 63, 3$57 1º
1
515-6840-00
Item 1 is secured below the playfield by: #8 X 1/2" HWH AB (Zinc) (Qty. 6) (234-5101-00)
2
Coil Retaining Bracket
2
535-7356-00
Items 2 & 3 are secured by: #8-32 X 3/8" Swage (Serr) Zinc (Qty. 2/per) (237-5975-00)
3
Coil, 23-1100 (ORG)
1
090-5030-00T
Coil has a Diode (1N4004) (112-5003-00) positioned @ top (above lugs next to windings).
4
5
6
Coil Sleeve (with extension)
Spring Washer, 17/32" ID X 3/4" X 1"
Ball Bumper, Plunger & Shaft Assy.
1
1
1
545-5847-00
269-5002-00
515-6844-00
For Individual Items use : Ball Bumper Plastic (Top) Red (550-5029-02), Plunger & Shaft
Only (515-6841-00), Plunger Head (detachable) (530-5511-00), #10-32 X 3/8" PPH MS
(Sems) Zinc (secures Plunger Head to Shaft) (232-5401-00), Roll Pin 3/32" ø x 1/2" Long
(251-5002-00) and Retaining Ring, 1/4" ø Shaft (270-5002-00)
Ordering Note: If 515-6844-00 is unavailable, order the individual part(s) actually required.
7
8
Compression (Relay) Spring
#10-32 Adj. Spindle Stop w/Rubber Tip
1
1
266-5022-01
280-5014-00
1
535-8303-00
Item 9 is secured by: #10-32 Keps Nut (Qty. 1) (240-5208-00)
9
Adjustment Spindle Stop Bracket
Ordering Note: If 500-6293-00 is unavailable, order the individual part(s) actually required.
!
!
7DNH1RWH
Coil Note: Either -00B or -00T can be used for coil
replacements. B/T listed is preferable for easier diode
access and may differ on game.
7RS
9LHZ
$X[
$X[
6HFWLRQ&KDSWHU
3DJH
'UDZLQJVIRU0DMRU
$VVHPEOLHV5DPSV
Backbox I/O Power Driver Board Detailed Wiring Diagram
FROM
GRY-RED
Power Out
STEPPER MOTOR
+12v DC
J16P3
I/O BD.
041-5069-00
16v AC
J17P7
I/O BD.
5A
Slo-Blo
FROM
BLU-WHT
Q17
Transformer
F7
13v AC
J17P8
I/O BD.
BRIDGE 20
Q18
CONTROLLED
LAMPS
GND
FROM
J13P10
I/O BD.
BRDG 20
BLU-WHT
J7
13v AC
J17P9
I/O BD.
Q19
Q20
Q21
FROM
Transformer
LAMP COLUMNS
+18v DC
Q22
F22
Q24
Note: All Coils require diodes.
Some diodes may be located on
Terminal Strips & not on the coil itself.
D iode
On
T erminal
S trip
Q1-Q8
STP20N10L
110-0106-00
For the Playfield Terminal Strips,
Fuses & Misc. Wiring Descriptions &
Locations, see Section 5, Chapter 2,
Playfield Wiring.
J8
BRIDGE 1
50v HIGH
CURRENT
COILS
F6
FROM
BLK-YEL
AC Voltages IN
GND
Q1
Q2
Q3
7A
Slo-Blo
48v AC
Q4
Q5
Q6
3A
Slo-Blo
Q7
BRDG 1
F21
3A
Slo-Blo
F20 FOR
FROM
BLK-ORG
AC Voltages IN
Q8
F20
MAGNET(S),
IF USED
J11P2
I/O BD.
48v AC
Q9-Q16
STP20N10L
110-0106-00
Q9
Q10
Q11
VOLTAGE OUTPUTS
J10
10
5 4
9 8 7
BLACK
GROUND
Backbox
Wiring
8
J9
3
2
1 J10
YEL-VIO
RED-YEL
HIGH POWER
HIGH POWER
50v DC
50v DC
YEL-BLK
VIO-YEL
HIGH POWER
HIGH POWER
24v AC
50v DC
Q12
Q13
Q14
Q15
Q16
#906
10
ORG 20v DC LOW POWER .
J7 1
BRN 20v DC LOW POWER .
2
3
4
6
7
8
9
VIO-BRN
23-800
VIO-RED
23-800
VIO-ORG
#89
27-1500
#89
#906
#906
VIO-BLK
#23 Flash:Upper
Right Flipper X2
Clear
Bulb
X2
Optional
10
J8 1
3
4
5
6
7
8
9
J9 1
2
4
5
6
7
8
9
(VIO-GRY)
BRN-BLK
OPTIONAL
26-1200
BRN-RED
23-800
BRN-ORG
24-940
#24
Optional Coil
#1 Trough
Up-Kicker
BRN-GRN
#5
Magnet
BRN-BLU
24-940
#6 Center
Eject
BRN-VIO
23-800
BRN-GRY
32-1800
BLU-BRN
26-1200
26-1200
26-1200
BLU-YEL
24-940
BLU-GRN
23-900
BLU-BLK
23-900
ORG-GRY
22-900
ORG-VIO
22-900
29-1400
OPTIONAL
+12V DC
SHAKER
MOTOR
041-5029-01
Located in Cabinet
FROM
RED
Power Out
+5v DC
J16P8
I/O BD.
5
3
J2
—
2
1
Resistor
W
#3 Elvis 5-Bank
(Drop Trgt.) Reset
#4 (OPT) Shaker
Motor (Optional)
BLU-ORG
order
Shaker Motor Kit
502-5027-00-84
#2 Auto
Launch
BRN-YEL
BLU-RED
RED
#19 Hotel
Door
#22 Flash:
Spinner
Clear
Bulb
X1
VIO-BLU
#18 Right
Slingshot
ELVIS
ARMS
RED-WHT
#21 Flash: Back
Panel TCB
Clear
Bulb
X1
VIO-GRN
#17 Left
Slingshot
RED-WHT
Diode
in Conn.
#20 Flash: Back
Panel X2
Clear
Bulb
X2
VIO-YEL
RED-WHT
#32 Flash:
Slingshots X2
Clear
Bulb
X2
BLK-GRY
BLU
#31 Flash: Elvis
Spot Lights X2
Clear
Bulb
X1
BLK-VIO
ELVIS
LEGS
S
Q23
J11P3
I/O BD.
7
#906
RED-WHT
Diode
in Conn.
29-1400
6
BLU
8A
Slo-Blo
BLK-BLU
#30 Elvis
Arms
520-5065-00
X
Located in Cabinet
OPTIONAL
BRDG 2
Transformer
#29 Elvis
Legs
Lug
Under
Playfield
N.C.
D2
F1
N/S
F2
D3
F3
FUSE
2.5A
250v
FROM
RED-WHT
#7 Hotel
Lock Release
6
7
4
5
1
2
Transformer
J1
+16v AC
+12v DC
J17P7
I/O BD.
#8 Control
Gate
#9 Left
Bumper
#10 Right
Bumper
#11 Bottom
Bumper
#12 Top
Eject
#13 Upper
Left Flipper
BLACK
Diode
in Conn.
J10P3
I/O BD.
MAGNET
BLACK
22-650
Q32
Q17-Q24
TIP122
110-0067-00
BLK-GRN
Rear
BLU
5
WHT
GRN
SHAKER MOTOR BOARD
GND
FROM
Q31
RED-WHT
BLUE
#28 Stepper
(Motor) #4
WHT
+
4
FROM
BRIDGE 2
20v LOW
CURRENT
COILS
#27 Stepper
(Motor) #3
Shaft Side
DIODE
1N5404
Q29
3
BLK
BROWN
Q28
WHT-RED
16v AC
J17P6
I/O BD.
BLACK
Q26
Q30
Transformer
#26 Stepper
(Motor) #2
RED
J6
GREEN
BLK
2
Q27
For the General Illumination (G.I.)
Circuit Detailed Wiring Diagram,
see Sec. 5, Chp. 2, Playfield Wiring.
RED
Q25
GRN
Q25-Q32
TIP122
110-0067-00
Haydon
Nº 46868-12-002
ORANGE
J6 1
Partial View
I/O Power
Driver Board
520-5137-01
#25 Stepper
(Motor) #1
FROM
VIO-YEL
High Power
50v DC
GRY-YEL
#14 Upper
Right Flipper
BLU-YEL
#15 (Lower)
Left Flipper
GRY-YEL
#16 (Lower)
Right Flipper
BLU-YEL
3A
Slo-Blo
J10P4/5
I/O BD.
FROM
YEL-VIO
3A
Slo-Blo
High Power
50v DC
3A
Slo-Blo
J10P1/2
I/O BD.
3A
Slo-Blo
RED-YEL
FROM
High Power
50v DC
These Coil Fuses are located
under playfield NEAR assembly,
see Sec. 5, Chp. 2, Playfield Wiring.
Section 5, Chapter 1
Page 101
10 9 8 7 6 5 4 3 2 1
9
1
1
5
10 9 8 7 6 5 4 3 2 1
10
9 8 7 6 5 4 3 2 1
2
1
BRN-BLK
KEY (P-2)
BRN-RED
BRN-ORG
BRN-YEL
BRN-GRN
BRN-BLU
BRN-VIO
BRN-GRY
RED-YEL +50v DC
RED-YEL +50v DC
VIO-YEL +50v DC
YEL-VIO +50v DC
YEL-VIO +50v DC
KEY (P-6) .
BLK (GND).
BLK (GND).
BLK (GND).
YEL-BLK 24v AC
YEL-BLK 24v AC
J11
AC
VOLTAGES
1
10
J10
VOLTAGE
OUTPUTS
10 9 8 7 6 5 4 3 2 1
6
1
9
BLU-BRN
BLU-RED
KEY (P-3)
BLU-ORG
BLU-YEL
BLU-GRN
BLU-BLK
ORG-GRY
ORG-VIO
BLK-ORG 48v AC
YEL
YEL-WHT
YEL
YEL-WHT
YEL
12
RED-BRN
RED-BLK
RED-ORG
RED-YEL
RED-GRN
RED-BLU
KEY (P-7)
RED-VIO
RED-GRY
RED-WHT
RED
N/C
10 9 8 7 6 5 4 3 2 1
2
1
+18v
BLU DC
YEL-BRN
YEL-RED
YEL-ORG
YEL-BLK
YEL-GRN
YEL-BLU
YEL-VIO
KEY (P-2)
YEL-GRY
10
12 11 10 9 8 7 6 5 4 3 2 1
7
1
LAMP
ROWS (GND)
3
BLK-YEL 48v AC
J12
J13
LAMP
COLUMNS (18v)
3
TO DOT MATRIX DISPLAY
FROM CPU-SOUND
CN8
6
3
4
4
5
3
6
CN2
3
5
5
CN1
RIBBON CABLE
RIBBON CABLE
J2
J1
26
25
2
NOT USED
SWITCH 2
SWITCH 4
SWITCH 6
SWITCH 8
DATA 1
DATA 3
DATA 5
DATA 7
RESET
STAT Ø
STAT 2
BUSY
NOT USED
SWITCH 1
SWITCH 3
SWITCH 5
SWITCH 7
DATA Ø
DATA 2
DATA 4
DATA 6
STROBE
NOT USED
STAT 1
STAT 3
1
2
14
2
13
DISPLAY ENABLE
ROW DATA
ROW CLOCK
COL. LATCH
PIX CLOCK
SER. DATA
NOT USED
1
7
1
GROUND
GROUND
GROUND
GROUND
GROUND
GROUND
NOT USED
RED
1
7
2
7
1
8
YEL-BLK -110v DC
GRY-YEL -98v DC
KEY (P-3)
YEL (GND)
BLK (GND)
RED
+5v DC
BLU
+12v DC
VIO-YEL +68v DC
BRN +20v DC
VIO-BRN
VIO-RED
VIO-ORG
KEY (P-5)
VIO-YEL
VIO-GRN
VIO-BLU
VIO-BLK
VIO-GRY
{Optional 5v Coil}
9
J9
HIGH CURRENT
SOLENOIDS
J17
POWER FROM THE
TRANSFORMER
6
2
{
{
1
8
DISPLAY CONTROLLER BD.
520-5055-03
Located behind the Dot Matrix Display
J3
3
Section 5, Chapter 1
Page 102
3 2 1
2
1
GND BLK
KEY (P-2)
+5v DC RED
Sec. 5: Backbox ...
CN2 to
Display
CN1
from
Xfrmr.
9 8 7 6 5 4 3 2 1
3
1
J1
7
5
8
9
YEL-WHT
When connecting any
Ribbon Cable, always
ensure the "Red Line"
side of the ribbon cable
goes to the Pin-1 side
of any Dual 0.1" Header
Connector.
ttt
RED
GREEN t t t
BLACK t t t
BLUE t t t
BLK-GRN
BLK-BLU
BLK-VIO
BLK-GRY
KEY (P-9)
ORG +20v DC
10
J6
FLASH
LAMPS
J7
J8
RIBBON CABLE
1
4
2
3
6
J16
POWER
OUT
J15
GENERAL
ILLUMINATION (G.I.'s)
5
4
1
DISPLAY
POWER
SUPPLY BD.
520-5138-00
HIGH CURRENT
SOLENOIDS
J2
AUXILLIARY
OUT PORT
1
19
9
1
J14
G.I.'s FROM
TRANSFORMER
RED
RED
+5v DC
BLU
+18v DC
KEY (P-5)
BLK (GND)
WHT COM .110v AC
BLK-RED 110v AC
WHT-GRN 88v AC
LOW CURRENT
SOLENOIDS
J3
AUXILLIARY
IN PORT
1
I/O POWER
DRIVER BOARD
520-5137-01
1
15
14
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Printer
Audio
Audio
J14, Pins
1-6 are all
5.7v AC
{
CN4 to
Speaker(s)
CN3
POT
1
VIO
GRN
YEL
BRN-WHT
KEY (P-5)
WHT-VIO
WHT-GRN
WHT-YEL
WHT-BRN
5
6NOT
5 4 USED
3 2 1
1
Important:
5
20
1
2
6 5 4 3 2 1
6
1
5
+12v
DC
BLK (GND)
KEY (P-14)
N/C
BLK (GND)
BLK (GND)
BLK (GND)
BLK (GND)
RED
+5v DC
+5v DC
N/C
RED
+5v DC
RED
+5v DC
RED
+5v DC
GRY-RED +12v DC
GRY-WHT +12v DC
BLK-WHT -12v DC
CN2
from
I/O
Power
Driver
Board
SP2 SP1
7 6 5 4 3 2 1
YEL-WHT
YEL-BLK
KEY (P-5)
RED-WHT
RED-BLK
N/C
N/C
{
CN5 to
Cabinet &
Playfield
+5v
DC
RED
BLK (GND)
BLK-WHT
N/U
-12v
KEY
GRY-WHT DC
{
CN5
SWITCH COLUMNS
(DRIVES)
2
1 2 3 4 5 6 7 8 9
9
SOUND
POWER
CN2
WHT-RED 16v AC
BLU-WHT 13v AC
SP3
Move Conn. J2 to J4 on TSI
Bd. if ToPS™ Kit installed,
then connect the Tournament
Connector from J1 on TSI Bd.
to J2 I/O Board.
Note: If the Printer Interface
Board is used, the Dot Display
or Tournament Wiring must be
disconnected from J2 and/or J3.
RED
8v AC
GRY-WHT (GND)
GRY
19v AC
BLU-WHT 13v AC
GRY-GRN 19v AC
CN4
7
J3 ONLY used if UK GAME
(Aux. Driver Bd. Required)
or
if ToPS™ Kit is installed, Tournament Serial Interface (TSI) Board
required.
or
if Printer Interface Board
is used (see Sec. 5, Chp. 3,
Cabinet/Coin Door Wiring
Diagram, bottom right corner).
RED-WHT 16v AC
RED
8v AC
CN6
DEDICATED SWITCH INPUTS
(SWITCH TO GROUND)
CPU/
SOUND
BOARD II
(w/ATMEL)
520-5300-00
1
GRN-GRY
GRN-VIO
GRN-BLU
GRN-BLK
GRN-YEL
GRN-ORG
GRN-RED
KEY (P-2)
GRN-BRN
{
1
2
CN8
CN1
TO PLASMA
CONTROLLER
RED
RIBBON CABLE
26
25
CN7
SWITCH ROWS
(RETURNS)
10
4
BLK-RED
BLK
GRY-BLK
GRY-VIO
GRY-BLU
GRY-GRN or N.C.
GRY-YEL
KEY (P-5)
GRY-ORG
GRY-RED
GRY-BRN
BLK
1
UNK
GND
DS-8
DS-7
DS-6
DS-5
DS-4
KEY
DS-3
DS-2
DS-1
GND
1 2 3 4 5 6 7 8 9 10
{
2
1
1
{
BLK
WHT-BRN
WHT-RED
WHT-ORG
WHT-YEL
WHT-GRN
KEY (P-4)
WHT-BLU
WHT-VIO
WHT-GRY
12
5
1 2 3 4 5 6 7 8 9 10 11 12
UK
ONLY
UK
ONLY
RED
J5
NOT USED
{
1 2 3 4 5 6 7 8 9 10
}
TO DISPLAY CONTROLLER
J1
1 2 3 4 5 6 7 8 9
CN7 from
Cabinet &
Playfield
J4
NOT USED
J2 I/O to under Playfield
Connector for 19-LED
Board (Rings)..
10
See Section 5, Chapter 4,
Printed Circuit Boards (PCBs),
Pages 143-148,
for UK & Special Application(s)
3X Transistor Driver Board
and ToPS™ Overview & Wiring,
regarding the use of J2 & J3.
1 2 3 4 5 6 7 8 9 10 11 12
12
Backbox Board Layout Wiring Diagram
Backbox
Wiring
Section 5
Playfield Wiring
Chapter 2 of 4
General Illumination Circuit Detailed Wiring Diagram
Below: Bottom of Playfield shown
as if leaning up against the Backbox.
G.I. RELAY
Partial View
I/O POWER DRIVER BD.
520-5137-01
8
5
X
6
20v DC
D0 3
1Q
1D
D229
2
U206
1N4004
Diode
R254
74HCT273
Data
Latch
1K W
Y
Y
YEL
Y
YEL
Above Playfield:
G.I. in Light Reflector on
Shooter Lane Gate Brkt.
Primary
V
Secondary
5.7v AC
Y
YEL
YEL-WHT
YEL-WHT
YEL-WHT
Transformer
6
J14
8
7
6
4
3
2
WHT-VIO
WHT-GRN
WHT-YEL
J15
9
8
1
3
2
1
Location: Back Panel X10; Pops X3
Upper Right Corner X1
WHT-BRN
#1
#2
#14*
Note: Various Colors, see
Page 62 for Part Numbers.
Y = YELLOW to WHT-YEL
Location: Mid Left & Lower Playfield X15
B
Circuit
2
YEL
G
15 / 1 ea.
#44
#44 // #555
#555
WHT-YEL
G
#1
#2
#16*
J15-P8 to J15-P3 (Fuse F26)
G = GREEN to WHT-GRN
WHT-GRN
Below: Located at the top of the P/F,
rear view of the Back Panel.
GRN
B
B
B
B
B
B
B
B
3
#1
Wiring
Harness
Connector
YEL-WHT
2 ea.
#555 Bulb
Circuit
Coin
Door
#3
YEL
On Coin
Door
#12*
J15-P9 to J15-P4 (Fuse F27)
V = VIOLET to WHT-VIO
Location: Mid Right Playfield X6
WHT-VIO
BRN
WH
T-B
RN
Circuit
4
VIO
#1
* G.I. Bulb quantities may change during production.
Playfield
Wiring
#2
55/ 1
ea.
ea.
#44 /Bulb
#555
#44
GIs on rear
Back Panel:
(X10)
#5*
Note: GI above P/F is #555 Bulb.
Section 5, Chapter 2
Page 103
Sec. 5: Playfield ...
Location: Upper Playfield X10
+ US Coin Door X2 (Euro X3)
B
10 ea.
#44 Bulb
G
B
4
J15-P6 to J15-P1 (Fuse F24)
V
B
G
B
5
J15-P7 to J15-P2 (Fuse F25)
G
G
6
Circuit
Above Playfield:
GIs in Pop
Bumpers (X3)
G
G G
7
B = BRN-WHT to WHT-BRN
B
G
(5.7v AC)
5A 250v
SLO-BLO Fuses
F27 F26 F25 F24
1
V
(G.I.) Bulbs
5
9
V
Y
4
General
Illumination
4
BRN-WHT
Y
PRI-103.5-115-207-230V 50/
60Hz 750VA CLASS 130 EPBO
3
YELLOW
Y
Y
2
G.I. 5.7v AC
INPUT
FROM
XFRMR
2
GREEN
Y
Above Playfield:
G.I. in Light Reflector on
Left Wire Ramp Plastic.
Y
3
1
VIOLET
V
Y Y
1
RELAY
RELAY
DRIVER
DRIVER
Y
Y
Y
7
11 / 3 ea.
#44 / #555
Y
Q200
2N3904
Transistor
Playfield Switch Wiring Diagram
Note: All Switch, Lamp & Coil assemblies require diodes. Some diodes are located
under the playfield on Terminal Strips or Diode Boards and not on the assemblies.
D
O
T
S
For Switch(es):
17-21
D iode
On
T erminal -orS trip
D
O
D
B
Switch
Drive
Transistor
Source N º :
2N3904
D iode
On
D iode
B oard
COLUMN
DRIVE
1
2
3
4
Switch 1
Left Button
(UK ONLY)
] Future
Expansion
] Future
Expansion
Switch 2
4th
Coin Slot
Switch 3
6th ]
Coin Slot
Switch 4
Switch 33
Switch 41
Switch 49
Switch 57
Spinner
D Switch 26
Elvis Home
Stepper Mtr.
Switch 34
Left
Top Lane
Switch 42
Left
Bumper
Switch 50
Left
Outlane
Switch 58
Left
5-Bank
Orbit Hi
E ( L ) VIS
27
Switch
Switch 19
D
Ctr. Saucer
Eject
Switch 35
Middle
Top Lane
Switch 43
Right
Bumper
Switch 51
Left
Return Lane
Switch 59
Inner
5-Bank
Loop
EL ( V ) IS
Switch 20
D Switch 28
Not
Used
Switch 36
Right
Top Lane
Switch 44
Bottom
Bumper
Switch 52
Left
Slingshot
Switch 60
4-Bank
( K ) ING
Switch 37
Not
Used
Switch 45
Top Hotel
Standup
Switch 53
Right
Outlane
Switch 61
2
Not
Used
Switch 30
4-Bank
K ( I ) NG
Switch 38
Right
Ramp Made
Switch 46
Bottom Hotel
Standup
Switch 54
Right
Return Lane
Switch 62
4
6
Switch 9
Switch 17
Spot Note
Standup
Switch 10
5-Bank
( E ) LVIS
Switch 18
Shooter
Lane Exit
Switch 11
4-Ball Trough
#1 (Left)
Switch 12
D Switch 25
O
T
x
S
5
O
T
S
O
T
S
O
T
S
Right
Coin Slot
Switch 5
4-Ball
Trough #2
Switch 13
Right
5-Bank
Ramp Exit
ELV ( I ) S
Switch 21
D Switch 29
Center Coin
Slot / DBA
Switch 6
4-Ball
Trough #3
Switch 14
5-Bank
ELVI ( S )
Switch 22
Left
Coin Slot
Switch 7
4-Ball Trough
VUK Opto
Switch 15
3-Bank
( T ) CB
Switch 23
Left
Ramp Made
Switch 31
4-Bank
KI ( N ) G
Switch 39
Right
Orbit Low
Switch 47
Start
Button
Switch 55
Right
Slingshot
Switch 63
5th ]
Coin Slot
Switch 8
4-Ball Stacking Opto
Switch 16
3-Bank
T(C)B
Switch 24
Left
Ramp Exit
Switch 32
4-Bank
KIN ( G )
Switch 40
Right
Orbit Hi
Switch 48
Tournament
Button
Switch 56
Hotel
Door
Switch 64
Right Button
Shooter
Lane
3-Bank
TC ( B )
Top Saucer
Eject
Scarf
Standup
(UK ONLY)
O
T
S
Hotel
Post
Plumb
Bob Tilt
Playfield Lamp Wiring Diagram
6
7
8
1
3
5
7
8
x
Rock Again
Lamp 9
Hound Dog
Lamp 17
x
Left Outlane
Lamp 10
Blue
Suede Shoes
Lamp 18
Left
Return Lane
Lamp 11
Heartbreak Hotel
Lamp 19
Right
Return Lane
Lamp 12
Jailhouse Rock
Lamp 20
D
O
T
S
For Lamp(s):
No DOTS
Lamp 5
x
Right Outlane
Lamp 13
All Shook Up
Lamp 21
9
8
7
6
Lamp 25
Lamp 26
Lamp 27
Lamp 28
Lamp 29
5
4
3
2
1
Lamp 33
Lamp 34
Lamp 35
Lamp 36
Lamp 37
10
( E ) LVIS
Lamp 41
Sec. 5: Playfield ...
Left
Orbit Arrow
Lamp 49
Hound
Lamp 57
Left
Top Lane
Lamp 65
Video Mode
Lamp 73
( E ) NCORE
E ( L ) VIS
Lamp 42
L. Orbit Blue
Suede Shoes
Lamp 50
Dog
Lamp 58
Middle
Top Lane
Lamp 66
Gold Record
Lamp 74
E ( N ) CORE
EL ( V ) IS
Lamp 43
All
Lamp 51
Center
Loop Arrow
Lamp 59
Right Top Lane
Lamp 67
King
of Rock N Roll
Lamp 75
EN ( C ) ORE
Section 5, Chapter 2
Page 104
ELV ( I ) S
Lamp 44
Left Orbit Note
Lamp 52
C. Loop Blue
Suede Shoes
Lamp 60
Heart
Lamp 68
Lite Extra Ball
Lamp 76
ENC ( O ) RE
1
3
4
5
6
7
8
9
9
8
7
6
5
3
2
1
Wire & IC
Switch
Return IC
Source N º :
LM339AN
Hound
Dog
D iode
On
T erminal -orS trip
D
O
D
B
D iode
On
D iode
B oard
SWITCH
RETURN
J13-Pin 10 is Power Out for +18v DC to
the Display Power Supply Bd at CN1-Pin 6
1
4
Lamp 4
PIN
Q1
Q2
Q3
Q4
Q5
Q6
Q7
Q8
WHT-BRN U400
WHT-RED U400
WHT-ORG U400
WHT-YEL U400
WHT-GRN U401
WHT-BLU U401
WHT-VIO U401
WHT-GRY U401
ROW
RETURN
3
Lamp 3
GRN-BRN
GRN-RED
GRN-ORG
GRN-YEL
GRN-BLK
GRN-BLU
GRN-VIO
GRN-GRY
CPU/Sound Board
N/C
10
2
Lamp 2
CN5
Wire & Transistor
PIN
CN7
Please Note: Switch & Lamp Descriptions may differ slightly than that of the Dot Display due to space restraints.
Note: All Switch, Lamp & Coil assemblies require diodes. Some diodes are located
under the playfield on Terminal Strips or Diode Boards and not on the assemblies.
Lamp 1
SWITCH
DRIVE
ELVI ( S )
Lamp 45
( K ) ING
Lamp 53
Center
Loop Note
Lamp 61
Break
Lamp 69
Encore Letter
Lamp 77
ENCO ( R ) E
Lamp 6
X
Spot Note
Lamp 14
Hits Completed
Lamp 22
Left
Ramp Arrow
Lamp 30
Right
Ramp Arrow
Lamp 38
Right
Orbit Arrow
Lamp 46
K ( I ) NG
Lamp 54
Lock
Lamp 62
Hotel
Lamp 70
Graceland
Lamp 78
ENCOR ( E )
Lamp 7
x
Scarf
Lamp 15
Elvis Collected
Lamp 23
Shook
Lamp 31
Up
Lamp 39
Gift
From Elvis
Lamp 47
KI(N)G
Lamp 55
Jackpot
Lamp 63
T(C)B
Lamp 71
Special
Lamp 79
Tournament
Button
Lamp 8
x
( T ) CB
Lamp 16
Top
10 Completed
Lamp 24
Left
Ramp Note
Lamp 32
Right
Ramp Note
Lamp 40
Right
Orbit Note
Lamp 48
K IN ( G )
Lamp 56
Super Jackpot
Lamp 64
TC ( B )
Lamp 72
Extra Ball
Lamp 80
Start Button
5
6
7
8
BLUE
YEL-BRN
YEL-RED
YEL-ORG
YEL-BLK
YEL-GRN
YEL-BLU
YEL-VIO
YEL-GRY
10
U17
U16
U15
U14
U13
U12
U11
U10
9
8
7
6
5
4
3
1
Wire & IC
LAMP
DRIVE
J13
I/O Power Driver Board
PIN
COLUMN
DRIVE
Lamp
Drive IC
Source N º :
VN02N
Lamp
Return
Transistor
Source N º :
STP19N06L
ROW
RETURN
1
2
3
4
5
6
7
8
9
10
LAMP
RETURN
J12
Wire & Transistor
PIN
RED-BRN
RED-BLK
RED-ORG
RED-YEL
RED-GRN
RED-BLU
RED-VIO
RED-GRY
RED-WHT
RED
From I/O Pwr.
Driver Board
J16-Pins 9-15
Q33
Q34
Q35
Q36
Q37
Q38
Q39
Q40
Q41
Q42
N/C
1
2
3
4
5
6
8
9
10
11
12
Playfield
Wiring
Playfield Terminal Strips, Fuses & Misc. Wiring Descriptions & Locations
Please Note: Terminal Strip(s), Diode Board(s) and/or Fuse Holder(s) locations shown,
represent the general location (your game may differ slightly).
Explanation:
All Switch, Lamp & Coil assemblies require
diodes. Some diodes are located under the
playfield on Terminal Strips or Diode Boards
and not on the assemblies. The Switch and
Lamp Matrix Grids also note which Switch or
Lamp has a diode on a Terminal Strip (noted
by "DOTS" meaning: "Diode On Terminal
Strip") or on a Diode Board (noted by "DODB"
meaning: "Diode On Diode Board").
Bottom of Playfield
Shown as if leaning up against the
Backbox.
All fuses are rated:
3A 250v Slo-Blo
Do Not Over-Fuse
LOWER RIGHT
FLIPPER FUSE
RED
BLU-YEL 3A S.B. YEL
S1
1
3A
FU
SE
AUX. 2
3A
S1
2
3
FU
S
E
DS
2
L1
DS
Q15
S1
S1 4
5
S1
S16
LOWER LEFT
FLIPPER FUSE
RED
GRY-YEL 3A S.B. YEL
Q1
S1
S1 5
4
Q2
4
Legend:
L11
Q16
S = Switch Matrix Number (Below P/F Only)
L = Lamp Matrix Number (Below P/F Only)
Q = Coil / Flash (see Page 101)
DTS / TS = ( Diode ) Terminal Strips & Lug
( A-D )
L12
L10
L13
L9
GI
GI
S59
S62
S60
S57
GI
Q18
Q17
S59
S61
S62
L28
L18
AUX. 3
L4
L16
L33
UPPER RIGHT
FLIPPER FUSE
RED
BLU-YEL 3A S.B. YEL
L40
L6
L34 L44
S9
L15
L35
S18
L39
L32
L24
GI
L14
Q3
L3
6
3A FU
S19
3
L56
L4
S20
L22
L3
7
A
L52
Terminal
Strip
ORANGE
WHT-ORG
ORG-YEL
WHT-YEL
ORG-GRN
WHT-GRN
L51
GI
L47
GI
Q11
L45
S36
Q29
S5
Q30
S33
GI
S22
C
L8
Q9
3A
SE
3
S49
GI
L6
GI
GI
GI
S41
S32
L57
Elvis™ Pinball
Jumper for Gen.
Illumination (GI)
Terminal Lamps X3 Pop
Strip Bumpers (1/per)...
Q8
GI
L59
BLK X3
—WHT-VIO
JUMPER
NO DIODE
REQUIRED
—BLK X3
VIOLET
D
Elvis™ Pinball
Jumper for
Stepper Motor
Terminal Power 12v DC
Strip Q25 through Q28
GRY-RED
WHITE X2
Q25—Q28
JUMPER
NO DIODE
REQUIRED
Q19
S43
Q12
Playfield
Wiring
GI
S42
L58
GI
C
Q10
S50
GI
—ORG-GRN
to GRN-ORG
—WHT-GRN
D
GI
Q13
—ORG-YEL
to GRN-ORG
—WHT-YEL
Q7
GI
S24
C
Jumper
JUMPER TS
POP BUMPER GIs X3 Lug
BLACK X3
WHT-VIO
BLACK X3
VIOLET
Terminal
Strip
L6
FU
S23
—ORG-RED
to GRN-ORG
—WHT-RED
GI X3
GI
1
4
UPPER LEFT
FLIPPER FUSE
RED
GRY-YEL 3A S.B. YEL
—ORANGE
to GRN-ORG
—WHT-ORG
LUG 12V DC
STEPPER MOTOR
Q25-Q28
WHT X2
GRY-RED
GI
S37
GI
—ORG-BRN
to GRN-ORG
—WHT-BRN
GI
D
S38
L46
GI
S34
S39
GI
Elvis™ Pinball
Switches:
19 5-Bank EL( V )IS
20 5-Bank ELV( I )S
Terminal
Strip 21 5-Bank ELVI( S )
B
Q5
L38
0
GI
B
Q6
L53
S4
Terminal
Strip
ORG-BRN
WHT-BRN
ORG-RED
WHT-RED
L3
0
L7
Elvis™ Pinball
Switches:
17 5-Bank ( E )LVIS
Terminal
Strip 18 5-Bank E( L )VIS
4
L49
L48
GI
L5
L50
L41
Q28
Q27
Q26
Q25
S21
Q14
DTS
S19
S20 L55
S21
DTS
S17
S18
A
L31
B
A
L23
L42
GI
SE
See the Pink Pages, Playfield - General
Parts & Switches (Below) (Pg. 66) for
Terminal Strips, Diodes, Fuses and Fuse
Holders Part Numbers.
Section 5, Chapter 2
Page 105
Sec. 5: Playfield ...
S17
SW. 19
L21 L25
SW. 20
L3
L27
L26
SW. 21
L19
L20
AUX. 1
L5
L29
L17
SW. 17
GI
S58
SW. 18
L2
4-Flipper Circuit Wiring Diagram
GRY-GRN
GRY-YEL
GRY-ORG
GRY-RED
GRY-BRN
OOOOOOOOOOO
1 2 3 4
67
12
DEDICATED SWITCH INPUTS
(SWITCH TO GROUND)
CN6
CPU-SOUND BOARD
(PARTIAL VIEW)
UPPER
RIGHT
FLIPPER
N.O.
IN CABINET
DEDICATED
SWITCH
IN CABINET
DEDICATED
SWITCH
N.O.
DS-5
IN CABINET
DEDICATED
SWITCH
N.O.
DS-1
DS-3
ON ASSY.
DEDICATED
SWITCH
N.C.
ON ASSY.
DEDICATED
SWITCH
Technical Overview
DS-2
DS-4
BLK
(GROUND)
NOTE:
N.C. = Normally Closed
N.O. = Normally Open
OOOOOOOOOOOOOOO
1
The Outside LEFT FLIPPER BUTTON located on the Cabinet
operates both the Left Flipper & Upper Left Flipper (if used).
The Outside RIGHT FLIPPER BUTTON located on the Cabinet
operates both the Right Flipper & Upper Right Flipper (if used).
RIGHT BUTTON ONLY: This switch is Double-stacked.
Pressing half-way down operates the Lower Right Flipper;
pressing full down operates both the Lower Flipper & Upper
Right Flipper(if used) simultaneously.
Note on this Game: 4-Flippers are used (Lower & Upper Left,
Lower & Upper Right).
LEFT
E.O.S.
RIGHT
E.O.S.
N.C.
LEFT
FLIPPER
RIGHT
FLIPPER
15
11
Q13
POWER OUT
J16
Q14
MOS FET
STP20N10L
Q15
Q16
(PARTIAL VIEW)
10
J10
J9
VOLTAGE
OUTPUTS
HIGH CURRENT
SOLENOIDS
2 1
OOOOOOOOOO
2 RED-YEL 50V DC 2
The 3A 250v Slo-Blo Fuses
are located under the playfield
NEAR the Flipper Assembly,
see previous page for locations.
Coil Wrap: YELLOW
3A SLO-BLO
(Located under Playfield)
RED-YEL 50V DC
BLU-YEL
22-900
9 8 7 6
1
OOOOOOOOO
I/O POWER
DRIVER BOARD
BLU-GRN
BLU-BLK
BLU-BLK
ORG-GRY
ORG-VIO
LOWER
RIGHT
FLIPPER
COIL
Coil Wrap: YELLOW
Sec. 5: Playfield ...
3A SLO-BLO
(Located under Playfield)
RED-YEL 50V DC
GRY-YEL
22-900
LOWER
LEFT
FLIPPER
COIL
Coil Wrap: GREEN
3A SLO-BLO
(Located under Playfield)
RED-YEL 50V DC
BLU-YEL
23-900
UPPER
RIGHT
FLIPPER
COIL
Coil Wrap: GREEN
3A SLO-BLO
(Located under Playfield)
RED-YEL 50V DC
Section 5, Chapter 2
Page 106
GRY-YEL
23-900
UPPER
LEFT
FLIPPER
COIL
Our Flipper System
uses one supply voltage
(50v DC) for both kick &
hold. Once the Game
CPU detects a Flipper
Cabinet Switch closure
(during game play) it
applies a 40msec pulse
to the gate of the Flipper
Drive Transistor (STP20N10L). If it continues
to detect a Flipper
Cabinet Switch closure
(the player holding the
button in) it will continue
to pulse the flipper drive
transistor 1msec every
12msecs for the duration
of the hold cycle.
The E.O.S. (End-OfStroke) Switch serves
the same function as
before as it prevents
foldback when the player has the flipper energized to capture balls.
The E.O.S. Switch is a
normally closed switch
which opens approximately 1/16" when the
flipper is energized. The
Game CPU will detect a
switch closure if the flipper bat is forced back by
a high velocity shot or
rebound on the playfield
and will apply another
40msec pulse of 50v DC
to the coil.
Playfield
Wiring
Chapter 3 of 4
I/0
120V / 240V
50 Hz / 60 Hz
1
GRY-WHT
2
J17
19V AC
3
2
FOR LOGIC
+12/-12V DC
TO BRIDGE 3
5
5
WHT
6
TO
DOLLAR BILL$
VALIDATOR
RF1
GRY-GRN
9
2
3
1 115V AC
5
BLU-WHT
4
BLU-WHT
8
WHT-RED
19V AC
4
9
8
FOR 18V DC
CONTROL LAMPS
TO BRIDGE 20
13V AC
10
9
16V AC
7
WHT
3
13V AC
6
FOR 20V DC
COILS
TO BRIDGE 2
7
WHT-RED
DOMESTIC
CONFIGURATION
GRN
RED
RED
BLK-YEL
1F1
275V
Domestic =
8A 250V
Note: Not All International Games
have or require a Service Outlet.
Slo-Blo Fuse
15
BLK-ORG
WHT-GRN
JUMPERS FOR VOLTAGE VARIATION
WHT
2
3
4
5
6
7
8
9
2
88V AC
2
WHT
1
1
BLK-RED
1
48V AC
12
100V AC
2
1F/M3
J14
1
1
3
3
YEL
2
115 VOLTS
DISPLAY
POWER
SUPPLY
BOARD
3
8
<<<
CONFIGURATON FOR
DOMESTIC 115V
<<<
2
FOR
GENERAL
ILLUMINATION
(G.I.'s)
EXPORT/ HIGH
LINE VOLTAGE
230/218/206 VOLTS
1F1= 5A 250V SLO BLO
1V1= 275V VARISTOR
BLK
WHT
<<<
<<<
5.7V AC
CONFIGURATION OF 220V
OR LOWER LINE VOLTAGES
FOR INTERNATIONAL USE
1
2
3
4
5
6
7
8
9
YEL-WHT
1
2
3
BLK
1
2
3
WHT
4
5
6
WHT
4
5
6
7
8
9
7
8
9
206 VOLTS
4
4
5
5
6
6
1F/M4
BLU
230 VOLTS
BLK
BLU
BLK
BALLAST
1F1= 8A SLO BLO
1V1= 130V VARISTOR
STARTER
FLUOR. FS2 LIGHT
SPI N1: 165-5011-01
SPI N1: 010-5015-00
BLK
<<<
BLK-WHT
2
3
4
5
6
7
8
9
<<<
100/105 VOLTS
Cabinet
Wiring
LOCATED IN THE BACKBOX
WHT
SP2/K 5/8" Core
120V 50/60Hz 13W (UL)
1
ONLY ON
COIN DOOR
120V AC
218 VOLTS
CONFIGURATON FOR BLK
JAPAN or
WHT
LOW LINE VOLTAGE
FOR
50V DC
COILS
TO
BRIDGE 1
CN1
5A 250V
Slo-Blo Fuse
BLK
1
24V AC
HOT (L)oad
Int'l. = BRN 220V AC
Domestic = BLK 115V AC
International =
3
24V AC
YEL-BLK
SERVICE OUTLET
(Domestic / International)
130V
International =
4
48V AC
11
GRN (to (E)arth Ground)
Domestic =
FOR +5V DC
LOGIC
TO BRIDGE 21
J11
LINE
CORD
1V1
VARISTER
1
8V AC
14
(N)eutral
7
8V AC
13
GROUND
Domestic = WHT 115V AC
Int'l. = BLU 220V AC
16V AC
6
FLUORESCENT TUBE
RED
(F20T12CW)
SPI N1: 165-5031-02
WHT
Section 5, Chapter 3
Page 107
Sec. 5: Cabinet ...
LINE
FILTER
GRY
TO I/O POWER DRIVER BOARD
BLK
BLK
1F/M2
1T1
1F/M1
ON/OFF
FLUORESCENT TUBE, STARTER & BALLAST IN THE BACKBOX
Transformer Power Wiring Diagram
TO I/O POWER DRIVER BOARD
Section 5
Cabinet Wiring
Cabinet / Coin Door Wiring Diagram
PLUMB
BOB TILT
CPU/SND BD.
q CN7 q
1
SW RETURN 7
2
WHT-GRY
TOURNIE
BUTTON
N.O.
WHT-VIO
COIN DOOR
CONNECTOR
SW. 56
N.O.
q CN4 q
from
CPU
CN7
Pin:
SW. 55
2
4
REDWHT
3
REDBLK
BLKRED
BACKBOX LEFT
SPEAKER (SP2)
RED-BLK
5th Coin Slot
Future Use
WHT-VIO
3
SW RETURN 6
N.O.
WHT-BLU
SW. 54
3
CPU/SND BD.
WHT-BLU
Left Coin Slot
WHT-GRN
U.S. Bill Acceptor
Center Coin Slot
q CN4 q
YEL-BLK
6
5
6
SW RETURN 4
SW RETURN 3
7
SW RETURN 2
8
WHT-GRN
5
WHT-YEL
WHT-RED
q CN5 q
SW DRIVE 7
8
SW DRIVE 1
1
WHT-RED
8
GRN-VIO
TO COIN METER
J16-7 +5V DC
I/O DRVR BD 22 RED
J7-10 Q24
I/O DRVR BD 78 VIO-GRY
All Above Switches
Normally Open (N.O.)
from
CPU
CN5
Pin:
CPU/SND BD.
6th Coin Slot
Future Use
4th Coin Slot
European Use
WHT-ORG
7
8
GRN-BRN
from CN5-P1 (Sw. Drive 1)
FOR THE PRINTER
SUB-ASSEMBLY
GROUND
00 BLK
q CN7 q
BLK
CPU/SND BD.
BLK
D
D
D
.
.S
.S
. 3 S. 5
.1
TM
GRY-BLK
D.S. 8
GRY-VIO
D.S. 7
D.S. 6
GRY-BLU
8
N.O.
GRY-GRN
7
PORTALS
SERVICE
BUTTONS
BEGIN TEST /
ENTER: BLACK
BUTTON
SERVICE CREDITS / RT.: GREEN
BUTTON
VOLUME /
LEFT: RED
BUTTON
DEDICATED
SWITCHES
G.I.
5.7V AC
3
WHT-GRN
YEL-WHT
GRN
YEL
8
G.I.
LAMPS
on
COIN
DOOR
p J15 p
I/O PWR DRVR BD.
COIL POWER
INTERLOCK SWITCH
I/O PWR
DRVR BD.
Normally Open - 1 q J17 q
RED-WHT 16V AC
7
N.O.
TRANSFORMER
Common - 1
WHT-RED 16V AC
Normally Open - 2
BLK-YEL 48V AC
50v DC
COILS
(XFRMR)
I/O PWR
DRVR BD.
q J11 q
9
(AC)
DIODE
GRN-BRN
5
KEY
BRN
8
CN2
+12V DC 1
IN 1 2
CN1
KEY 3
7 SW RET 6
IN 2 4
IN 3 5
6 SW RET 5
5 SW RET 4
N/U 6
2 GND
IN 4 7
N/U 8
4 SW DRV 1
+12V DC 9
GND 10
SW 1 11
3
SW
2 12
1 20V DC
SENTINEL SW 3 13
14
N/U
INTERFACE
BOARD SW 4 15
520-5037-01
p CN5 p
I/O PWR
DRVR BD.
q J7 q
RED
WHT-BLU
KEY
WHT-GRN
WHT-YEL
N/U
WHT-RED
N/U
RED
WHT
GRY-YEL
GRY-GRN
GRY-BLU
N/U
GRY-VIO
1
CPU/SND
BOARD
q CN7 q
10
GRN-BRN
SW DRV 1 4
N.O.
p CN5 p
CPU/SND
BOARD
WHT-BLU 3
SW RET 6 5
WHT-GRN 5
SW RET 5 6
WHT-YEL
SW RET 4 7
6
p CN7 p
CN1
CPU/SND
BOARD
Red Stripe 1
9
CN2
CN3
2
10
RED 12V DC
GND
Ded. Switch
1
CPU/SND
BOARD
q CN5 q
1
PRINTER INTERFACE OPTIONAL
Cable Wiring Harness SPI Part N1:
036-5408-00
RS-232 Printer Interface Board SPI Part N1:
520-5069-00
Connection Notes:
1
PRINTER BOARD
CN1
I/O DRVR BD J16-3:
+12V DC
DATA LINES
I/O DRVR BD J3-10:
PRNTR CNT
COIN
MECH
q CN. q
1
2
3
4
5
6
7
8
9
10
COIN DOOR
Section 5, Chapter 3
Page 108
N.O.
9
p CN7 p
GRN-BRN
BRN
+20V DC 1
BLK
GND 2
3 KEY
RIBBON CABLE, Pins 1-10
corresponds to the Coin
Mech. Conn. Pins 1-10
p CN5 p
WHT-GRY
SW RET 5
5
4
3
2
1
3 WHT-BLU
5 WHT-GRN
6 WHT-YEL
BLK
10
GRN-BRN
1
-----------------------------------------------------------UK ONLY: 2 Extra Cabinet Buttons for the
Post Save™Feature are used. The Left Button operates the Left Outlane Ball Deflector.
The Right Button operates the Right Outlane
Ball Deflector. Both buttons pushed together
operate the Center Up/Down Post. Both buttons are located under the Flipper Buttons.
------------------------------------------------------------
WHT-BRN
WIRING CONFIGURATION WILL
VARY ACCORDING TO COUNTRY
3
1
UK ONLY
CPU/SND BD.
p CN7 p
CPU/SND BD. SW DRV 1
WHT-RED
WHT-VIO
WHT-ORG
KEY
N/C
q CN7 q
q J13 q
1
WHT-GRN
3
I/O PWR
DRVR BD.
YEL-VIO
YEL-GRY
1N4001 DIODE
SPI PART No.
112-5001-00
Electronic Coin Mech.
Interface Board, 520-5193-00
N/U
N/U
N/U
KEY
WHT-RED
CPU/SND
BOARD
1
8
115V AC LINE
VOLTAGE
(AC)
2
p J12 p
Lamp
79
Tournie
(XFRMR)
q CN7 q
1
2
3
4
SW RET 2 5
Sec. 5: Cabinet ...
CN3
p J7 p
7
BLK
WHT
3
CPU/SND BD.
TO SENTINEL COIN MECH.:
WIRING CONFIGURATION WILL
VARY ACCORDING TO COUNTRY
I/O PWR
DRVR BD.
6
ELEC. COIN MECH. INTERFACE BD., 520-5193-00
FOR USE ONLY IN
SENTINEL COIN DOOR
CPU/SND
4
TRANSFORMER
Common - 2
BLK-YEL 48V AC
FOR USA 2 SLOT
COIN DOOR ONLY
AMP CONNECTOR TO
$ BILL ACCEPTOR (DBA)
1
START / TOURNIE BUTTON LAMPS
Lamp
Lamp
80
80
Tournie
Start
RED
11
GRY-BRN
2
N.O.
20v DC
COILS
J16-7 +5V DC
I/O DRVR BD 22 RED
J16-3 +12V DC
I/O DRVR BD 82 GRY-RED
GRY-ORG
4
LEFT FLIPPER
BUTTON
9
GRY-BLU
8
RIGHT FLIPPER
BUTTON
10
GRY-VIO
9
UPPER
RIGHT FLIPPER
BUTTON
from
CPU
CN6
Pin:
N.O.
GRY-BLK
10
BLK
Memory Protect
Switch
BLK-RED
12
3
GRN
BLK
q CN6 q
2
GRN-BRN
BLK
BLK
1
N/C
1
CPU/SND BD.
10
YEL-WHT
Right Coin Slot
WHT-YEL
6
WHT-ORG
CABINET BOT.
SPEAKER (SP3)
7
LEFT
BUTTON
SW RETURN 5
BACKBOX RT.
SPEAKER (SP2)
REDBLK
START
BUTTON
RIGHT
BUTTON
SW RETURN 8
N.O.
MONO SPEAKERS X3
CPU/SND BD.
I/O DRVR BD J3-9:
PRNTR CLK
I/O DRVR BD J2-10:
PRNTR ENABLE
I/O DRVR BD J3-1:
PRNTR BUSY
I/O DRVR BD J16-7:
+5V DC
CPU BD CN7-10:
GND
P1P9
p J2 p
I/O PWR
DRVR BD.
ORG-BRN
ORG-RED
ORG-BLK
KEY
ORG-YEL
ORG-GRN
ORG-BLU
ORG-VIO
ORG-GRY
1
2
3
4
5
6
7
8
9
CN2
GRY-RED
KEY
GRN-WHT
BRN-WHT
ORG-WHT
N/C
BRN
N/C
RED
BLK
1
2
3
4
5
6
7
8
9
10
Cabinet
Wiring
Section 5
Printed Circuit Boards (PCBs)
Chapter 4 of 4
Tr o u g h U p - K i c k e r D u a l O P T O B o a r d s T h e o r y o f O p e r a t i o n & S c h e m a t i c
As light from the Transmitter LED1 falls on the Receiver LED1, it generates a Positive Bias Voltage (0.7v to 1.5v)
which is applied to the Gate (G) of Q1 (Fet 2N5460) turning Q1 off. When Q1 is held off, no current flows through
Q2's (2N3906) Base (B). With no base current, Q2 is off and acts as an OPEN SWITCH. When the light is
interrupted (BLOCKED) R1 (Rec. Bd.) bleeds the gate voltage off of Q1 allowing it to conduct, switching Q2 on,
which acts as a CLOSED SWITCH. The LED2 (Trans/Rec) Circuit operates identical as the LED1 Circuit.
+5v
B
CN1
RED
Te s t
Point
CN1
1 WHT/XXX
2
R1
LED 1
R1
10M W
TLRH180P
180 W
R2
4.7K W
G
Q1
2N5460
R3
10K W
LED 1
TLRH180P
A
B
B
D
S
(Switch Row/
Return +)
E
Q2
2N3906
C
Te s t
Point
Te s t
Point
G=Gate D=Drain S=Source
B=Base E=Emitter C=Collector
3 WHT/XXX
R2
180 W
R4
LED 2
10M W
TLRH180P
LED 2
BLK
Q3
2N5460
R6
10K W
1
520-5173-00
Transmitter
GND
4.7K W
G
TLRH180P
520-5174-00
Receiver
A
(Switch Row/
Return +)
R5
B
D
S
E
Q4
2N3906
C
2 GRN/XXX
Te s t
Point
(Switch Col/
Drive -)
= Emitting Light
Tr o u g h U p - K i c k e r D u a l O P T O B o a r d s C o m p o n e n t La y o u t & Pa r t s
Boards Actual Size
520-5173-00 (TRANS)
520-5174-00 (REC)
(Screened Text Printed Larger for Clarity)
00-4715-025
CER
105
Back Side
(Solder / Surface Mounts)
Front Side
(LEDs & 3-Pin Connector)
1B1
ITEM
QTY
PART NUMBER
REF-DESIGNATOR
DESCRIPTION
A
—
01
02
03
04
05
B
—
01
02
03
04
05
06
07
08
09
1
1
1
2
2
3
3
1
1
1
2
2
2
2
2
2
3
3
515-0173-00
520-5173-00
045-5111-02
165-5052-00
121-5067-00
530-5308-02
545-5518-00
515-0174-00
520-5174-00
045-5111-03
165-5052-00
110-5006-00
110-0086-00
121-5082-00
121-5083-00
121-5011-00
530-5308-02
545-5518-00
Dual-OPTO Trans. Bd. Assy.
Dual-OPTO Trans. Board
CN1
LED1, LED2
R1, R2
n/a
n/a
Dual-OPTO Rec. Bd. Assy.
Dual-OPTO Rec. Board
CN1
LED 1, LED 2
Q1, Q3
Q2, Q4
R1, R4
R2, R5
R3, R6
n/a
n/a
PCB Assy. (with all Items 1-5)
PCB Assy. (with Items 1-3 only)
2X, .156" Rt. Angle (26-60-5020) Conn.
LED TLRH180P (Ultra Bright Red)
180 W 1/8W Chip Res. (CRCW)
OPTO PCB Brass Tube Spacer
OPTO PCB Rubber Grommet
PCB Assy. (with all Items 1-9)
PCB Assy. (with Items 1-7 only)
3X, .156" Rt. Angle (26-60-5030) Conn.
LED TLRH180P (Ultra Bright Red)
2N5460, Transistor (P-FET SOT-23)
2N3906, Transistor
10M W 1/8W Chip Res. (CRCW)
4.7K W 1/8W Chip Res. (CRCW)
10K W 1/8W Chip Res. (CRCW)
OPTO PCB Brass Tube Spacer
OPTO PCB Rubber Grommet
Printed Circuit
Boards (PCBs)
Replacement Part:
LED TLRH180P
(T1-3/4 GaAIAs)
SPI Part N1:
165-5052-00
Section 5, Chapter 4
Page 109
Sec. 5: PCBs
2A 7
105
103
MGE3
MGE3
2A 7
Back Side
(Solder / Surface Mounts)
562
Q4
562
1B1
Front Side
(LEDs & 2-Pin Connector)
103
00-3715-025
SNART
23727URXEOHVKRRWLQJ
9ROW0H WH U7HVWLQGLF DWH VQRUPDORSHUDWLQJF RQGLWLRQ
A. OPEN OPTO (Light Falling on LED) = SWITCH OPEN. Place meter leads across points A and B on the
LED1 Circuit (Refer to Schematic Drawing on previous page, 520-5174-00 Receiver Side). It should read
approximately 0.8 - 1.2v DC. The LED2 Circuit operates the same.
B. CLOSED OPTO (Light Blocked) = SWITCH CLOSED. Place meter leads across points A and B on the
LED1 Circuit (Refer to Schematic Drawing on previous page, 520-5174-00 Receiver Side). It should read
approximately 0.0 - 0.1v DC. The LED2 Circuit operates the same.
2VF LOORVF RSH7H VWLQGLFDWHVQRUPDORSH UDWLQJFRQGLWLRQ
)LJ$
A. OPEN OPTO (Light Falling on LED) = SWITCH OPEN. Place Scope lead
at Pin-1 of OPTO Rec. Board with Scope Grounded (see Schematic). The
Scope should display a STEADY +5v as shown in Fig. A, Wave Form
Diagram.
)LJ%
B. CLOSED OPTO (Light Blocked) = SWITCH CLOSED. Place Scope lead
at Pin-1 of OPTO Rec. Board with Scope Grounded (see Schematic). The
Scope should display a PULSE STREAM indicating Q2 has switched "On"
as shown in Fig. B, Wave Form Diagram. This is your Switch Drive Pulse.
%HQFK 7HVW6HH)LJ&
Please Note: To perform this test you must use a spare
560: Pull-Up Resistor, SPI Nº: 121-5047-00
)LJ&
Disconnect the OPTO Transmitter / Receiver Board
from the circuit. Connect one side of a 560: Pull-Up
Resistor to Pin-1 of the OPTO Receiver Bd. and the
other side of the resistor to a 5v DC source. Connect
Pin-2 to GND. Connect a +5v DC source to Pin-1 of the
Transmitter & GND to Pin-2. Align with the Receiver
OPTO approx. 3" distance. Using your Volt-Meter or an
Oscilloscope, monitor Pin-1 while BLOCKING and
UNBLOCKING the BEAM from the Trans. The output will
be approx. +5v DC when the BEAM IS NOT BLOCKED
and approx. v when the BEAM IS BLOCKED.
7URXJK'XDO2372%RDUGV$OLJQPHQW7HVWIRU/('
When a working OPTO is installed and connected in a game, the transmitter should light (LED1 lower & LED2
upper) when the power is switched on. With the playfield in Service Position #1 (playfield lifted up and resting on
Playfield Support Slide Brackets) and the game on, the LED lights should show up as a BRIGHT RED RINGS
through the back of the Receiver Board around the Receivers LED1 & LED2 (see Fig. 1). Testing only LED1:
With the game in Switch Test Mode, lifting the Trough Plunger with a fingertip should block the BEAM and cause
the Switch Position to trigger (see Fig. 2). View Fig. 2a & 2b (on the next page) for a sectional view of the Light
Path (note alignment) and what happens as a ball breaks the light beam.
)LJ
5HFHLYHU %RDUG
6HF3&%V
%5,*+7 5(' 5,1*
3OXQJHU
9LHZIDFLQJWURX JKZLWKSOD\
ILHOGLQ6HU YLFH 3RVLWLRQ
6HFWLRQ&KDSWHU
3DJH
)LJ
3OXQJHU EORFNV %($0
/LI W
SOXQJHU
WRF KH FN
VZLWFK DV
VKRZQ
3ULQWHG&LUFXLW
%RDUGV3&%V
6HFWLRQDOYLHZIURPULJKW)LJDE
5HF
6LGH
)LJD
)LJE
7UDQV
6LGH
/LJKW 3DWK
3LQEDOO
(Note
alignment)
7URXJK'XDO2372%RDUGV$OLJQPHQW7HVWIRU/('
When a working OPTO is installed and connected in a game, the transmitter should light (LED1 lower & LED2
upper) when the power is switched on. With the playfield in Service Position #1 (playfield lifted up and resting on
the Playfield Support Slide Brackets) and the game on, the LED lights should show up as a BRIGHT RED RINGS
through the back of the Receiver Board around the Receivers LED1 & LED2 (see Fig. 1, previous page). Testing
only LED2: TO PERFORM THIS TEST, A PINBALL MUST BE IN THE BALL TROUGH. With the game in Switch
Test Mode, lifting the Trough Plunger with a finger tip should block the BEAM on LED2 and cause the Switch
Position to trigger (see Fig. 3). View Fig. 3a & 3b for a sectional view of the Light Path (note alignment) and what
happens as a "double-stacked" ball scenario breaks the light beam.
)LJ
)LJD
)LJE
5HF
6LGH
7UDQV
6LGH
3LQEDOO
/LJKW 3DWK
3OXQJHU
EORFNV
%($0
/LI W
SOXQJHU
WRF KH FN
VZLWFK DV
VKRZQ
,
(Note
alignment)
0
3
2
5
7
$
1
7
6HF3&%V
If replacement of LED is required, insure that is mounted correctly
before and after soldering (See Fig. 4a / 4b).
)LJD
&RUUHFW3RVLWLRQ
3ULQWHG&LUFXLW
%RDUGV3&%V
)LJE
,QFRUUHFW3RVLWLRQ
6HFWLRQ&KDSWHU
3DJH
Dot Matrix Display / Display Controller Bd. Combined Display Connections
CN1-Pin 14
CN1-Pin 2
P2-Pin 14
P2-Pin 2
NOT USED
GROUND
GROUND
GROUND
GROUND
GROUND
GROUND
NOT USED
GROUND
GROUND
GROUND
GROUND
GROUND
GROUND
Sec. 5: PCBs
VIO-YEL
BLU
RED
BLK
YEL
—
GRY-YEL
YEL-BLK
NOT USED
SER. DATA
PIX CLOCK
COL. LATCH
ROW CLOCK
ROW DATA
DISPLAY ENABLE
NOT USED
SER. DATA
PIX CLOCK
COL. LATCH
ROW CLOCK
ROW DATA
DISPLAY ENABLE
8
7
6
5
4
3
2
1
Section 5, Chapter 4
Page 112
CN3-Pin 25
RIBBON CABLE
J1
CN3-Pin 1
CN1-Pin 13
520-5055-03
STAT 3
BUSY
STAT 1
STAT 2
NOT USED
STAT Ø
STROBE
RESET
DATA 6
DATA 7
DATA 4
DATA 5
DATA 2
DATA 3
DATA Ø
DATA 1
SWITCH 7
SWITCH 8
SWITCH 5
SWITCH 6
SWITCH 3
SWITCH 4
SWITCH 1
SWITCH 2
NOT USED NOT USED
J3
Dot Matrix Display
Explained
The display utilizes a MicroProcessor Control Board
mounted in piggyback fashion
to the Dot Matrix Display (128 X
32) Driver Board. The purpose
behind this board is to provide
more information to the
operator as well as displaying
graphics to the player.
RIBBON CABLE
J2
CN1-Pin 1
P2-Pin 13
RIBBON CABLE
P2
P2-Pin 1
+68v DC
+12v DC
+5v DC
GND
GND
KEY
-98v DC
-110v DC
P1
520-5052-00
CN3-Pin 2
GND
KEY
+5 VDC
Display Controller Board
CN3-Pin 26
3
2
1
Dot Matrix Display Board
BLK
—
RED
The board is controlled by a
6809E Micro processor and its
personality ROM (Unique to
the Game). It receives Data,
Reset & Clock Information from
the CPU/Sound Board via the
ribbon cable and sends back
multiple Status and Busy
Signals to the CPU. This is to
insure synchronized
communication between the
CPU and the Display Controller
Board. The Drivers for the rows
and columns are provided on 5
surface mounted integrated
circuits on the Dot Matrix
Display Driver Board.
Printed Circuit
Boards (PCBs)
D i s p l a y Po w e r S u p p l y B o a r d S c h e m a t i c
1 CN2
-120V
8PKK156C
2 CN2
-100V
8PKK156C
3 KEY
4 CN2
C7
5 CN2
R1
130 W
5W
D1
1N4004
88V AC
+
CN1 1
GND
CN1 3
7PKK156E
KEY 5
+20V
0.75A
S.B.
CN1 4
7PKK156E
CN1 6
CN1 7
.. Q1
+5V
R2
7 CN2
+12V
8PKK156C
8 CN2
Q5
MPSA92
C3
D5
1N4760A
68V
GND
+
D2
1N4004
+5V
1N4764A
100V
47K W
1W
C2
.. Q2
220 uF
200V
+20V
D6
R3
GND
7PKK156E
+5V
6 CN2
0.1 uF
500V
R6
330K W
1/2W
R8
+60V
8PKK156C
MJE15030
2K W
5W
F1
7PKK156E
XFRMR
_GND
GND
8PKK156C
GND +5V
+12V
MJE15030
1.5K W
1/2W
47K W
1W
CN1 2
0.1 uF
500V
8PKK156C
C1
7PKK156E
110V AC
Q3
R4
D3
1N5228
3.9V
220 uF
200V
GND
GND
8PKK156C
MPSA42
D4
1N5228
3.9V
R5
1.5K W
1/2W
C4
0.1 uF
500V
R10
R7
330K W
1/2W
1.5K W
1/2W
GND
D7
1N4743
13V
.. Q4
MJE15031
7PKK156E
D i s p l a y Po w e r S u p p l y B o a r d C o m p o n e n t La y o u t & Pa r t s
®
Actual Board Size 5” X 3.3”
QTY
PART NUMBER
REF-DESIGNATOR
DESCRIPTION
—
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
1
2
3
0
1
1
2
2
1
1
1
1
2
1
1
2
2
2
2
1
1
2
3
2
1
0
520-5138-00
125-5044-00
125-5035-00
125-5003-00
045-5015-07
045-5015-08
112-5003-00
112-0053-00
112-0062-00
112-0049-00A
112-0061-00
200-5000-17
205-0004-00
110-0100-00
110-0082-00
110-0101-00
535-5000-11
240-5008-00
237-5501-00
110-0103-00
121-5061-00
121-5060-00
121-5038-00
121-5059-00
121-5062-00
124-5003-00
Display Power Supply Board
C1, C2
C3, C4, C7
(C5, C6: NS)
CN1
CN2
D1, D2
D3, D4
D5
D6
D7
F1
F1
Q1
Q2
Q3, Q5
Q3, Q4
Q3, Q4
Q3, Q4
Q4
R1
R2, R3
R4, R5, R10
R6, R7
R8
(VR1: NS)
Complete PCB Assembly
220uF, 200v, Radial Lytic Cap.
0.1uF, 500v, Ceramic Disk Cap.
22uF, 35v, Rad Lytic Cap
7PKK156E (PIN5=KEY)
8PKK156 (PIN3=KEY)
1N4004, Diode
1N5228, 3.9v, Diode
1N4760A, 68v, Diode
1N4764A, 100v, Diode
1N4743, 13v, Diode
3/4A (0.75A) S.B. Fuse
Fuse Clip
MPSA92, Transistor
MPSA42, Transistor
MJE15030, Transistor
Heatsinks - AAVID #563002
#6-32 KEPS Nut
#6-32 X 3/8" PPH Screw
MJE15031, Transistor
130 W 5W Res.
47K W 1W Res.
1.5K W 1/2W Res. (R9: NS)
330K W 1/2W Res.
2K W 5W Res.
7812CT
Printed Circuit
Boards (PCBs)
(NS = Not Stuffed)
Section 5, Chapter 4
Page 113
Sec. 5: PCBs
ITEM
Display Controller Board Schematic
3
4
J1
U2
U1-A
D
J5
U1-C
U1-D
J3-1
J3-2
J3-3
C
U4
B
U9
J2
U1-F
J4-1
Sec. 5: PCBs
A
U10
U1-E
J4-2
J4-3
J4-4
J4-5
J4-6
4
Section 5, Chapter 4
Page 114
3
Printed Circuit
Boards (PCBs)
Display Controller Board Schematic
2
1
U8
U3
D
U7
C
U6
U5
U1-B
A
U11
Schematic Set
®
Sheet 1 of 1
SIZE
REV.
E
D
SPI Display Controller Board
SPI Part Nº: 520-5055-03 JUNE 2001
Prepared By: CES Inc. Edited By: SPI Inc.
Model: 237-0255-00 Dated: 06/17/01
Non-Text Document
2
Printed Circuit
Boards (PCBs)
1
Section 5, Chapter 4
Page 115
Sec. 5: PCBs
B
D i s p l a y C o n t r o l l e r B o a r d C o m p o n e n t La y o u t & Pa r t s
09AD7YK
74HCT245D
RESET
C49
R13
R29
R27
R25
R23
R9
C53
R17
C34
C41
C22
1
C33
J4
C40
XILINX®
C35
U1
C39
+
C21
C36
C25 C24 C26
+
+
U6
C47
U5
C50
R5
+
L1
C46
U5
RSN1
J5
C37
R8
11AJ
L52B
Actual Board Size 20.5cm X 12.5cm
U11
R20
R11
27C040
DISP. CNTRLR.
C27
C44
R21
U4
C38
C31
C29
C20
C30
U7
C43
C32
08A51XX
74HCT04D
XC9572XL™
TQ100AEN0101
F1168339A
7C
C28
C19
R12
R28
R26
R24
R22
U2
EF68B09EP
6
U3
02C5RVK
74LS245DW
C48
U10
+
J1
C23
U3
R19
C51
FB2
C45
WB2060034
(ST) PHILIPPINES
R10
R1
R2
R18
03FC59K
74HCT273D
U9
R6
R16
C12
C11
C10
C9
C8
C7
C6
C5
C4
C3
C2
C1
C18
C17
C16
C15
C14
C13
J2
SAMSUNG 046A
K6T0808C1D-GB55
U8
C52
R15
R14
C42
R7
FB1
R4
R3
1
4MB
6
J3
ROM1
ROM0
Sec. 5: PCBs
ITEM
QTY
PART NUMBER
REF-DESIGNATOR
DESCRIPTION
(NS = Not Stuffed)
—
01
02
03
04
05
06
1
1
1
1
1
7
20
520-5055-03
045-5015-26
045-5015-02
045-5015-03
045125125-
Complete PCB Assembly
13-Pin, Dual row .1" Hdr. Conn HDR2X13
7-Pin, Dual Row .1" Hdr. Conn HDR2X7
3-Pin, PKK156B Connector
6-Pin (6P100)
SMT 0.01uF, 50v Cap. 103-0805-X7R
SMT 0.1uF, 50v Cap. 104-0805
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
2
12521
1252
125-5015-00
1
165-5099-00
4
1211
n/a
2
1211
1215
1219
1211
1212
1211
1213
1211
1001
1001
100-0189-01
1
100-5044-00
2 (See Pg. DR. u Table)
1
1001
100-5045-00
1
1001
1001
1402
n/a
0
Display Controller Bd. (FCC FEB98) Rev. E June 2001
J1
J2
J3
J4
C35-C39, C40, C41
C21, C24, C28-C32, C33, C34, C42, C43, C44, C45, C46
C47, C48, C49, C50, C53 (C51: NS)
C26, C27
C1-C12, C13-C18, C20, C23, C52
C19, C25
L1
R16-R18 (R19: NS)
RESET
R11, R13
R8
R1, R2, R3, R7 (R6: NS)
R21, R22-R29
R20
R9, R15
R5
R10, R12, R14
U1
U2
U3 (40-Pin Socket, 077-X)
U4
U5 (ROM0) (U6: NS) (32-Pin, IC Dip Socket, 077-5217-00)
U7
U8
U9
U11
RSN1
FB1, FB2
FID1-3
SMT 0.22uF, 50v Cap. 224-1206-Z5U
SMT 470pF, 50v Cap. 471-0805
100uF, 25v TCap.
LED T1-3/4 DIFFUSER RED
0 W 1/10W Resistor 0805
DO NOT STUFF
SMT 1K W 1/10W Resistor 0805
SMT 1M W 1/10W Resistor 0805
SMT 10K W 1/10W Resistor 0805
SMT 33 W 1/10W Resistor 0805
SMT 100 W 1/10W Resistor 0805
SMT 100K W 1/10W Resistor 0805
SMT 180 W 1/10W Resistor 0805
SMT 220 W 1/10W Resistor 0805
74HCT04D (74LS04)
74LS245DW
MC6809E
XC9572XL, Int. Xilinx®
4MB ROM 27C040 (M27C401-100)
74HCT273D
K6T0808C1D-GB55, Int. Samsung 046A
74HCT245D
LM3940IMP-3.3
8MHZRSN (8Mhz) Crystal
Ferrite Bead, FB0370
FIDTP50M
If a part is required where a part number is not provided, call Technical Support (see back of cover).
Section 5, Chapter 4
Page 116
Printed Circuit
Boards (PCBs)
,23RZHU'ULYHU%RDUG7KHRU \RI2SHUDWLRQ
5v Supply:
An AC voltage of approximately 9v comes into the board at [J17-(1-4)] this AC voltage is then full-wave rectified
by bridge BRDG 21 and filtered by Capacitor C203. The resulting voltage is 11v DC which is inserted into a linear
voltage regulator for the output of 5v DC. This 5v regulated voltage can be adjusted by potentiometer R116 the
voltage should be set to 5.00v. Besides powering the I/O Board the regulated 5 volts supplies power to the CPU /
Sound Board, Gas Plasma (Dot Matrix) Display and Plasma (Display) Controller Board. Power for these
devices comes off the I/O Board on [J16-(4-8)].
+5v, +20v, +50v, +18v, & +12v LED Indicators:
These DC voltages are derived on the I/O Board by
rectification and filtering. Each has a LED indicating that
power is being supplied to each of these voltage sources.
The -12v supply comes from the same transformer winding
as the +12v thus it does not have a LED indicator.
** Note that the +50v & +20v power sources are turned off
by the Interlock Switches when the Coin Door is OPEN.
/('
6833/< 92/7$*(
/
/
Y
/
Y
/
Y
/
Y
Reset Circuitry:
The I/O will reset in three (3) cases:
1.
The CPU is in reset. The CPU’s reset signal is fed into the I/O through connector J1 and forces
the I/O into reset.
2.
The 5v supply has fallen below 4.75v.
3.
The watchdog is not being fed by the scanning of the light matrix. More specifically Pin-19 of U6
must be toggling once every 50ms to prevent the watchdog from resetting. The scanning of the
light matrix is controlled by the CPU through J1.
LED L204 shows the reset state of the I/O Board. If this LED is not lit either the 5v DC is below 4.75v or the
CPU/Sound Board is holding the I/O in reset. If the LED is flashing this means that the watchdog is not being
feed by the CPU/Sound Board and the I/O is oscillating into and out of reset. If the LED is continuously on the
board is out of reset and communication from the CPU to the lamp matrix is confirmed. Testpoint Blanking is the
actual reset signal on the I/O Board. A low voltage indicates that it is in reset this will turn off all Solenoid (Coil)
Drivers, Flash Lamps, Lamp Matrix Drivers, Auxiliary Outputs and Flipper Outputs. A high voltage indicates that it
is out of reset and normal operation can take place.
Address Decoding:
All Address decoding is done by two 74LS138’s (U204 & U205) (3 of 8 decoder). Both of these must be in
operation for the I/O Board to function properly.
Solenoid (Coil) Drivers & Flash Lamps:
J8 & J9 are high side drivers for driving solenoids and other heavy loads. Each connector has its own buffer
driving 8 drivers. J8 & J9 consist of MOSFET Drivers 20N10L which can easily & safely be tested by clipping one
end of a clip-lead to test point FET TPL1 and then the other to the corresponding gate resistor R1-R16 (see Note
1). This will apply 3.4v to the gate of the MOSFET Transistor thus switching it on. J7 & J6 each are a bank of 8
low side driver for driving lamps or other lower current solenoids (coils). They use a Bipolar Power Transistor
TIP122 which can also be tested by using TEST POINT TIP TPL3 and the corresponding resistors R17-R32*
(see Note 1).
Note 1 x Clip on the resistor side with the white stripe. xx R1 controls Q1, R2 controls Q2, et cetera...
Lamp Matrix:
J12 has 10 low side drivers for the lamp strobes which consist of 19N06L MOSFETS. Only one lamp strobe
should be low at any time. Again the scanning of the lamp strobes keeps the I/O from resetting. J13 has 8 high
side drivers with each having a status indicator. All the status indicators are logically ’OR’ed together and fed back
to the CPU/Sound Board. The status can identify open loads (for example open lamp filaments or intermittent
connections) and short circuits. These drivers are also short-circuit protected.
General Illumination (G.I.) Lights:
J15 has 6v AC switched on & off by a relay on the I/O Board. The relay is controlled by Q200 which supplies
power to the 24v coil winding to activate the relay. There are 4 taps on J15 each fused at 5A for this 6v AC source.
3ULQWHG&LUFXLW
%RDUGV3&%V
6HFWLRQ&KDSWHU
3DJH
6HF3&%V
Auxiliary In & Out:
J2-8 CMOS Outputs sometimes used for a printer interface.
J3-8 CMOS Inputs general purpose inputs.
I / O Po w e r D r i v e r B o a r d S c h e m a t i c ( S h e e t 1 o f 5 )
4
3
D
C
B
Sec. 5: PCBs
A
NOTES:
R ALL RESISTOR VALUES ARE IN OHMS ( W ), 1/4W, 5%, UNLESS OTHERWISE SPECIFIED.
R ALL CAPACITOR VALUES ARE IN MICROFARADS ( mF ), UNLESS OTHERWISE SPECIFIED.
R 0.1 MICROFARADS ( mF ) BYPASS CAPACITOR ON ALL IC’S.
4
Section 5, Chapter 4
Page 118
3
Printed Circuit
Boards (PCBs)
I / O Po w e r D r i v e r B o a r d S c h e m a t i c ( S h e e t 1 o f 5 )
2
1
The above circuit(s) continue at the address shown (#-XY).
# = Sheet Number (1-5), X = Column Grid, Y = Row Grid
D
C
A
Schematic Set
®
Sheet 1 of 5
SIZE
REV.
E
D
SPI I/O Power Driver Board
SPI Part Nº: 520-5137-01
Prepared By: CES Inc. Edited By: SPI Inc.
Model: 237-0161-00 Dated: 09/05/97
2
Printed Circuit
Boards (PCBs)
1
Section 5, Chapter 4
Page 119
Sec. 5: PCBs
B
I / O Po w e r D r i v e r B o a r d S c h e m a t i c ( S h e e t 2 o f 5 )
4
3
D
C
B
Sec. 5: PCBs
A
The above circuit(s) continue at the address shown (#-XY).
# = Sheet Number (1-5), X = Column Grid, Y = Row Grid
4
Section 5, Chapter 4
Page 120
3
Printed Circuit
Boards (PCBs)
I / O Po w e r D r i v e r B o a r d S c h e m a t i c ( S h e e t 2 o f 5 )
2
1
NOTES:
R ALL RESISTOR VALUES ARE IN OHMS ( W ), 1/4W, 5%, UNLESS OTHERWISE SPECIFIED.
R ALL CAPACITOR VALUES ARE IN MICROFARADS ( mF ), UNLESS OTHERWISE SPECIFIED.
R 0.1 MICROFARADS ( mF ) BYPASS CAPACITOR ON ALL IC’S.
D
C
A
Schematic Set
®
Sheet 2 of 5
SIZE
REV.
E
D
SPI I/O Power Driver Board
SPI Part Nº: 520-5137-01
Prepared By: CES Inc. Edited By: SPI Inc.
Model: 237-0161-00 Dated: 09/05/97
2
Printed Circuit
Boards (PCBs)
1
Section 5, Chapter 4
Page 121
Sec. 5: PCBs
B
I / O Po w e r D r i v e r B o a r d S c h e m a t i c ( S h e e t 3 o f 5 )
4
3
D
C
The below circuit(s) continue at the address shown (#-XY).
# = Sheet Number (1-5), X = Column Grid, Y = Row Grid
B
Sec. 5: PCBs
A
4
Section 5, Chapter 4
Page 122
3
Printed Circuit
Boards (PCBs)
I / O Po w e r D r i v e r B o a r d S c h e m a t i c ( S h e e t 3 o f 5 )
2
NOTES:
R ALL RESISTOR VALUES ARE IN OHMS ( W ), 1/4W, 5%, UNLESS OTHERWISE SPECIFIED.
R ALL CAPACITOR VALUES ARE IN MICROFARADS ( mF ), UNLESS OTHERWISE SPECIFIED.
R 0.1 MICROFARADS ( mF ) BYPASS CAPACITOR ON ALL IC’S.
1
JAN 2001 Cut trace on solder side at Aux. Out Port J2-PIN1 thru J2-PIN3 &
TS
J2-PIN5 thru J2-PIN9; Soldered Resistor 100W 1/4W 5% (SPI N1:
121-5007-00). This Modification (highlighted below at J2 with a
dotted-line box) was accomplished on boards produced after Jan. 1, 2001.
This board is backwards compatible for the White Star™ Board System.
JET
Resistor 100W
D
C
A
Schematic Set
®
Sheet 3 of 5
SIZE
REV.
E
D
SPI I/O Power Driver Board
SPI Part Nº: 520-5137-01
Prepared By: CES Inc. Edited By: SPI Inc.
Model: 237-0161-00 Dated: 09/05/97
2
Printed Circuit
Boards (PCBs)
1
Section 5, Chapter 4
Page 123
Sec. 5: PCBs
B
I / O Po w e r D r i v e r B o a r d S c h e m a t i c ( S h e e t 4 o f 5 )
4
3
D
The below circuit(s) continue at the address shown (#-XY).
# = Sheet Number (1-5), X = Column Grid, Y = Row Grid
C
The above circuit(s) continue at the address shown (#-XY).
# = Sheet Number (1-5), X = Column Grid, Y = Row Grid
B
Sec. 5: PCBs
A
4
Section 5, Chapter 4
Page 124
3
Printed Circuit
Boards (PCBs)
I / O Po w e r D r i v e r B o a r d S c h e m a t i c ( S h e e t 4 o f 5 )
2
1
05-25-99
CUT PIN-3 TO GND ON U210 (4-3D)
NOTES:
R ALL RESISTOR VALUES ARE IN OHMS ( W ), 1/4W, 5%, UNLESS OTHERWISE SPECIFIED.
R ALL CAPACITOR VALUES ARE IN MICROFARADS ( mF ), UNLESS OTHERWISE SPECIFIED.
R 0.1 MICROFARADS ( mF ) BYPASS CAPACITOR ON ALL IC’S.
D
The above circuit(s) continue at the address shown (#-XY).
# = Sheet Number (1-5), X = Column Grid, Y = Row Grid
The below circuit(s) continue at the address shown (#-XY).
# = Sheet Number (1-5), X = Column Grid, Y = Row Grid
C
A
Schematic Set
®
Sheet 4 of 5
SIZE
REV.
E
D
SPI I/O Power Driver Board
SPI Part Nº: 520-5137-01
Prepared By: CES Inc. Edited By: SPI Inc.
Model: 237-0161-00 Dated: 09/05/97
2
Printed Circuit
Boards (PCBs)
1
Section 5, Chapter 4
Page 125
Sec. 5: PCBs
B
I / O Po w e r D r i v e r B o a r d S c h e m a t i c ( S h e e t 5 o f 5 )
4
3
D
C
The above circuit(s) continue at the address shown (#-XY).
# = Sheet Number (1-5), X = Column Grid, Y = Row Grid
B
Sec. 5: PCBs
A
4
Section 5, Chapter 4
Page 126
3
Printed Circuit
Boards (PCBs)
I / O Po w e r D r i v e r B o a r d S c h e m a t i c ( S h e e t 5 o f 5 )
2
1
D
C
NOTES:
R ALL RESISTOR VALUES ARE IN OHMS ( W ), 1/4W, 5%, UNLESS OTHERWISE SPECIFIED.
R ALL CAPACITOR VALUES ARE IN MICROFARADS ( mF ), UNLESS OTHERWISE SPECIFIED.
R 0.1 MICROFARADS ( mF ) BYPASS CAPACITOR ON ALL IC’S.
A
Schematic Set
®
Sheet 5 of 5
SIZE
REV.
E
D
SPI I/O Power Driver Board
SPI Part Nº: 520-5137-01
Prepared By: CES Inc. Edited By: SPI Inc.
Model: 237-0161-00 Dated: 09/05/97
2
Printed Circuit
Boards (PCBs)
1
Section 5, Chapter 4
Page 127
Sec. 5: PCBs
B
I / O Po w e r D r i v e r B o a r d C o m p o n e n t La y o u t
Test Points:
LED
TEST
•
¬TIP TPL3
¬BLANKING
¬L204 LED
•
•
TEST
TEST
•
TE
®
ST
•
TEST
¬RESET
LEDs :
¬L201+50v
¬L202+18v
¬L200+20v
TEST
•
LEDs
¬L203+12v
LED
TEST
•
TE
ST
•
¬FET TPL1
LED :
¬L2+5V
¬R116 POT
Actual Board Size 15.698” X 11”
TE
ST
•
Sec. 5: PCBs
Section 5, Chapter 4
Page 128
Printed Circuit
Boards (PCBs)
,23RZH U'ULYH U%RDUG3DUWV
ITEM
QTY
PART NUMBER
REF-DESIGNATOR
DESCRIPTION
(NS = Not Stuffed)
—
01
02
03
04
05
06
07
08
1
5
13
1
1
5
1
1
17
520-5137-01
112-5000-00
125-5030-00
125-5033-00
125-5035-00
125-5036-00
125-5034-00
125-5032-00
125-5031-00
Complete PCB Assembly
DB3501
220pF, (221), Cap.
100uF, 150v, Radial Lytic Cap.
.1UF, 500v, Ceramic Disk Cap.
15000uF, 25v, Radial Lytic Cap.
4700uF, 35v, Radial Lytic Cap.
100uF, 25v, Radial Lytic Cap.
0.1uF, (104), Cap.
09
10
11
12
13
22
0
16
0
25
125-5028-00
n/a
125-5029-00
125-5027-00
112-0054-00
14
15
16
17
18
19
20
21
22
2
26
1
7
2
1
2
1
1
112-5003-00
205-0004-00
200-5000-03
200-5000-01
200-5000-08
200-5000-05
200-5000-06
045-5015-01
045-5014-01
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
1
0
1
1
1
1
1
1
6
16
16
10
1
32
16
17
8
11
13
045-5015-00
n/a
045-5013-00
045-0014-03
045-5015-00
045-0014-06
045-5016-00
045-0014-09
165-5099-00
110-0106-00
110-0067-00
110-0088-00
110-0069-00
121-5042-00
121-5003-00
121-5045-00
121-5021-00
121-5011-00
121-5007-00
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
8
2
1
1
2
2
1
1
8
1
2
8
1
1
8
1
1
1
2
1
1
121-5029-00
121-5033-00
121-5030-00
121-5039-00
121-5036-00
121-5038-00
121-5050-00
121-5009-00
121-5016-00
190-5002-00
n/a
100-5012-00
110-0058-00
100-5023-00
110-0089-00
100-0356-00
n/a
100-0338-00
100-0148-00
100-0037-00
n/a
I/O Power Driver Board Rev. G
BRDG1, BRDG2, BRDG3, BRDG20, BRDG21
C1, C2, C3>C6, C7, C8, C9>C10, C11, C12
C25
C26
C27, C30, C201, C202, C203
C29
C32
C35, C36, C37, C38, C39, C40, C41, C42, C43, C45,
C46, C200, C238, C239, C240, C241, C242
C212>C219, C228>C237, C243>C246 (C204-C211: NS)
(C220>C227: NS)
C247>C254, C263>C270
(C255>C262, C271>C278: NS)
D200>D207, D208>D215, D220, D221, D222, D223,
D224, D225, D226, D227
D217, D229 (D216: NS)
F6, F7, F8, F9, F20, F21, F22, F23, F24> F27, F28
F6
F7, F8, F9, F24>F27
F21, F28
F22
F20, F23
J1
J2 (Key Pin-4), J6 (Key Pin-9), J7 (Key Pin-5)
J10 (Key Pin-6), J13 (Key Pin-2)
J3 (Key Pin-8)
(J4, J5: NS)
J8 (Key Pin-2), J9 (Key Pin-3), J15 (Key Pin-5)
J11
J12 (Key Pin-7)
J14
J16 (Key Pin-14)
J17
L2, L200, L201, L202, L203, L204
Q1>Q16
Q17>Q24, Q25>Q32
Q33>Q42
Q200
R1>R8, R9>R16, R200>R207, R208>R215
R17>R24, R25>R32
R33>R42, R236>R242
R49, R57>R61, R253, R256, R270 (R252: NS)
R50>R56, R255, R271, R300
R64>R76
Resistors on Solder Side @ J2-Pins: 1-3 & 5-9
R90, R92, R94, R96, R98, R100, R102, R104
R114, R269
R115
R116
R117, R272
R216, R218
R217
R219, R245>R251, R254, R302 (R228>R235: NS)
R261, R262, R263, R264, R265, R266, R267, R268
RELAY
TPL1, TPL3
U1, U2, U3, U4, U6, U18, U201, U206 (U200: NS)
U9
U210
U10, U11, U12, U13, U14, U15, U16, U17
U19
U19
U203 (U202: NS)
U204, U205
U209
BLANKING, RESET
470pF, (471), Axial Cap.
0.01uF, (103), 100v Cap.
0.1uF, (104), 100v, Cap.
1N4148, Diode
1N4004, Diode
Fuse Clips
7A 250v S.B. Fuse
5A 250v S.B. Fuse
3A 250v S.B. Fuse
8A 250v S.B. Fuse
4A 250v S.B. Fuse
20-Pin, 0.1 Dual Row Header
10PKK156
12PKK156
9PKK156
10-84-4030 (3-Pin MOLEX)
12PKK156
10-84-4060 (6-Pin MOLEX)
15PKK156
10-84-4090 (9-Pin MOLEX)
LED T1-3/4 DIFFUSER LED
22NE10L STP, Transistor
TIP122
19N06L STP, Transistor
2N3904, Transistor.
22K 1/4W Res.
620 1/4W Res.
39K 1/4W Res.
4.7K 1/4W Res.
10K 1/4W Res.
100 1/4W Res.
:
:
:
:
:
:
6.8K : 1/4W Res.
220 : 1/4W Res.
120 : 1/4W Res.
50 : Pot
330 : 1/4W Res.
1.5K : 1/2W Res.
4.7K : 2W Res. (SANDBAR)
1K : 1/4W Res.
47 : 1/4W Res.
6HF3&%V
FRL264D024/02CK Relay
Test Point Wire (24ga.) Loops
74HCT273
74LS245
DS1232
VN02N
LM338K
Heatsink (5v Reg.)
74HC245
74LS138
74LS74
Test Points
3ULQWHG&LUFXLW
%RDUGV3&%V
6HFWLRQ&KDSWHU
3DJH 030703
To view Playfields (above & below), click this box.
Sec. 5: PCBs
Section 5, Chapter 4
Page 130
Printed Circuit
Boards (PCBs)
&386RX QG%RDUG,,ZLWK$70(/ 3URFHVVRU7K HRU \RI2SHUDWLRQ
CPU Section:
The CPU is a 68B09E (U209) with up to 8 MBytes of CPU Code Space (U210). The CPU code is bank selected
by the use of U211 and each bank consists of 16 KBytes. 8 KBytes of RAM (U212) is available to the CPU. The
RAM is battery backed and has a write protected area. Battery back up is accomplished by 3-AA Cells (BAT1)
Battery Pack which has a TEST POINT (TP): VBATT to check the battery voltage status. The write protected area
consists of 512 Bytes used for storing game settings. This section of RAM can only be written to when the coin
door is open. The Coin Door switch comes into the CPU on CN6-12 and is fed into the address decoding PAL
U213. When this memory protect signal is low writes to the protected RAM area are prohibited. Address decoding
for the system is accomplished by one PAL U213 and one 1-of-8 decoder U214.
A watchdog is used to monitor the CPU and the 5v supply. If the 5v supply is below 4.75 the watchdog will hold
the CPU/Sound Board & I/O Board in reset. The watchdog must be fed at a rate of 250ms or faster. The signal
used to feed the watchdog comes from the EPROM Bank select signal used to load U211.
The I/O Interface CN1 is buffered by two (2) HC245 Chips (U207 & U208). The CPU’s reset line is buffered by
Q10 and fed over to the I/O through CN1. An I/O Strobe Signal is fed through CN1-15 and is used to notify the I/O
that a valid address is being sent.
Switches:
The Switch Matrix consists of eight (8) 2N3904 Transistors(Q1-Q8) which pull one of 8 strobes ‘low’ to activate a
Single Column of switches. The Switch Return Signals are fed into CN7 [SWITCH ROWS] and are highly filtered
and compared to a 2.5v reference voltage. The Switch Return Voltage must be below 2.5v to make a Valid Switch
Closure. If false switches are appearing, check that none of the 2N3904 Transistors are permanently pulling the
strobe line low. Only one strobe from CN5 [SWITCH COLUMNS] should be low at any time. CN6 [DEDICATED
SWITCH IN] is a Dedicated Bank of Input Switches. Switches connected to CN6 are connected to ground instead
of a strobe and may be read at any time.
Plasma Interface:
The data path for communication to and from the Plasma Controller Board is 8 bits wide. There are separate
Input and Output Busses. Data going out to the controller comes from the CPU’s Data Bus through U201 and
onto CN8-Pins 11-18. Status back from the Plasma Controller comes in on CN8-Pins 22-26 and is fed into U202
for input to the CPU’s Data Bus. Two control signals that go out to the Plasma Controller are PRES [TP17:
PLASMA RESET] and CN8-Pin 19 [PSTB - Plasma Strobe]. The Plasma Reset is software controllable through
U216/B and also has a test point "Plasma Reset". The Plasma Strobe Signal to the controller is generated from
U216/A and is used to latch data into the Plasma Controller.
6HF3&%V
Other Test Points (TP):
TP 7: E & TP5: Q - The CPU signals for both 68B09E processors. Should be at 2Mhz with Q leading E by
500 nsec. TP2: P0. TP3: P1. TP4: P2. TP20: (near U402). TP8: (near U219). TP1: +3.3V.
3ULQWHG&LUFXLW
%RDUGV3&%V
6HFWLRQ&KDSWHU
3DJH
C P U / S o u n d B o a r d I I ( w i t h AT M E L P r o c e s s o r ) S c h e m a t i c ( S h e e t 1 o f 4 )
H
P0
P1
P2
P3
P5
P6
P7
P8
P9
R470
J_RST
[ 2, A-2 ]
P24 / BMS
R433
100K
C434 47pF
P_D [ 15:8 ]
R509
P21 / TXD1 / NTRI [ 2, I-5 ]
/ SCK1
P15 / RXD0 [ 2, F-5 ]
P14 / TXD0 [ 2, I-5 ]
P13 / SCK0
P12 / FIQ
P11 / IRQ2
P10 / IRQ1
VDD IO
P2
C419 47pF
/ IRQ0
/ TIOB2
/ TIOA2
/ TCLK2
/ TIOB1
P4 / TIOA1 / SST0 [ 4, J-2 ]
P3 / TCLK1
P9
P8
P7
P6
P5
C418 100nF
VDD
CORE
/ TIOB0
1-3F
1-3G
P3
P6
P9
P13
100K
/ TCLK0
/ TIOA0
VDD IO
P1
P0
R479
+3.3V+3.3V+3.3V+3.3V
P_D12
P_D13
P_D14
P_D15
P31 / A23 / CS4
1-4F
P20
P19
P18
P17
P16
1-3H
P29 / A21 / CS6
VDD CORE
VDD IO
P30 / A22 / CS5
40MZ
[ 2, C-2 ]
33
TO XILINX
100K
1-3I
MCKI
33
R478
AT91R40008
PQFP100
TO ATMEL
R502
C416 47pF
ATMEL
P_D5
P_D6
P_D7
P_D8
P_D9
P_D10
P_D11
P_A22 [ 2, C-1 ]
3
75
74
73
72
71
70
69
68
67
66
65
64
63
62
61
60
59
58
57
56
55
54
53
52
51
P21
P20
P19
P18
P17
P16
P15
P14
P13
P12
GND
P11
P10
VDD IO
VDD CORE
P9
P8
P7
P6
P5
P4
P3
GND
GND
P2
U402
P_D0
P_D1
P_D2
P_D3
P_D4
P_A21 [ 2, C-2 ]
GND OUT
100
99
98
97
96
95
94
93
92
91
90
89
88
87
86
85
84
83
82
81
80
79
78
77
76
A0 / NLB
GND
A1
A2
A3
A4
A5
A6
A7
VDD IO
A8
A9
A10
A11
A12
A13
A14
GND
GND
A15
A16
A17
A18
A19
A20 /
P28 /
CS7
1-3J
2
100K
P28 / A20 / CS7
P_A15
P_A16
P_A17
P_A18
P_A19
P_A20
4
1-4G
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
3
VDD IO
VCC
R477
P_A8
P_A9
P_A10
P_A11
P_A12
P_A13
P_A14
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
OE
100K
P_A1
P_A2
P_A3
P_A4
P_A5
P_A6
P_A7
+3.3V
1
P29
VDD CORE
VDD IO
P30
P31
D0
D1
D2
D3
D4
GND
D5
D6
D7
D8
D9
D10
D11
VDD IO
D12
D13
D14
D15
P0
P1
A0 / NLB
P_D [ 7:0 ]
Y1
R476
4
P16
P17
P18
P19
P20
P23
P24
P25
1-4H
1-4I
1
2
40.000MHz
P27
P26
NCS1
NCS0
NWAIT
VDD IO
VDDCORE
NWRO / NWE
NRD / NOE
TCK
TDO
TDI
TMS
GND
GND
P25
P24
P23
MCKI
VDD IO
NWDOVF
NRST
GND
NWR1 / NUB
RXD1
U402
JP3
1-5F
P11
P12
P13
VDD IO
NWAIT
1-4J
+3.3V
3
C413 100nF
TCK
NWR1 / NUB [ 2, G-2 ]
P22 / RXD1 [ 2, F-5 ]
TDI
1-5G
1X3
Jumper
R436
R435
R434
1-5H
P [ 25:0 ]
[ 2, H-5: 2, E-5:
2, C-5: 2, A-4:
2, A-3 ]
C417 100nF
1K
1K
+3.3V
100
NWDOVF [ 2, 3-A ]
NRST [ 2, F-5 ]
C411 47pF
C412 100nF
R437
100K
P25 / MCKO
VDD IO
C410 100nF
VDD
CORE
C435 47pF
C415 100nF
C414 47pF
VDD IO
NWR0 / NWE [ 2, C-2* ]
NRD / NOE [ 2, C-1** ]
NCS3 [ 2, I-2 ]
NCS2 [ 2, C-2: 1, A-5 ]
NCS1
NCS0
[*] [ 1, J-1 ]
VDD CORE
VDD IO
+3.3V
TMS
MCKI
TDO
+3.3V
P23
1-5I
1-5J
[**] [ 1, D-3: 1, G-1 ]
5
F
1
2
3
4
5
6
7
1X7
J3
JTAG
1K
+3.3V+3.3V+3.3V
G
1K
P_A [ 19:1 ]
I
R508
J
100K
100K
R455
R456
P_D14
P_D [ 15:8 ]
P_D15
100K
R454
P_D12
100K
C424 47pF
100K
100K
R451
R452
1-2H
C425 100nF
100K
100K
100K
R448
R449
100K
R447
R450
100K
100K
R445
1-2I
R446
VDD IO
R453
P_D3
100K
R444
P_D2
100K
R443
P_D0
100K
R442
P_D1
100K
R441
C423 100nF
C422 47pF
2
VDD IO
C421 100nF
1-2J
C420 47pF
VDD
CORE
P_D13
TP20
Test Point
1-2F
1-2G
+3.3V
P_D [ 7:0 ]
(IDT71V016SA)
Sec. 5: PCBs
1
1-1J
NWR0/NWE [ 2, C-2: 1, I-4 ]
IRQ1
P10
P_A19
P_A18
P_A8
1-1I
P_A7
P_A6
P_A5
P_A4
P_A3
P_A2
A15
A14
A13
A12
A11
A10
A9
A8
A19
A20
WE#
RESET#
VPP
NC
RDY/BUSY#
A18
A17
A7
A6
A5
A4
A3
A2
A1
A16
BYTE#
GND
I/O15/A-1
I/O7
I/O14
I/O6
I/O13
I/O5
I/O12
I/O4
VCC
I/O11
I/O3
I/O10
I/O2
I/O9
I/O1
I/O8
I/O0
OE#
GND
CE#
A0
ATMEL
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
1-1H
29
28
27
26
25
P_A17
P_D15
P_D7
P_D14
P_D6
P_D13
P_D5
P_D12
P_D4
P_D [ 15..0 ]
[ 2, F-2 ]
100K
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
+3.3V
R459
U8
P_A16
P_A15
P_A14
P_A13
P_A12
P_A11
P_A10
P_A9
P_A20
C426 100nF
100K
+3.3V
R458
ADDRESS
BUS
OF ARM
TO RAM
P_A1
P_A2
P_A3
P_A4
P_A5
P_A6
P_A7
P_A8
P_A9
P_A10
P_A11
P_A12
P_A13
P_A14
P_A15
P_A16
R457
P_A [ 16:1 ]
[ 2, J-2: 2, C-3 ]
100K
+3.3V
Jumper
1X3
JP2
1
3
NCS0
NCS1
2
P_D11
P_D3
P_D10
P_D2
P_D9
P_D1
P_D8
P_D0
P_D0
P_D1
P_D2
P_D3
P_D4
P_D5
P_D6
P_D7
P_D8
P_D9
P_D10
P_D11
P_D12
P_D13
P_D14
P_D15
DATA
BUS
OF ARM
1-1G
1-1F
NRD/NOE [ 2, C-1: 1, D-3: 1, I-4 ]
P_A1
AT49BV1614
[ #, X-Y ] coming
from ...
[ #, X-Y ] going
to ...
The circuit(s) continue at the address shown [ #-XY ].
# = Sheet Number (3-5), X = Column Grid, Y = Row Grid
J
Section 5, Chapter 4
Page 132
I
H
G
F
Printed Circuit
Boards (PCBs)
C P U / S o u n d B o a r d I I ( w i t h AT M E L P r o c e s s o r ) S c h e m a t i c ( S h e e t 1 o f 4 )
E
D
C
12
A0
11
10 A1
A2
9
A3
8
A4
7
A5
6
A6
5
A7
27 1-5E
A8
26
A9
23
A10
25
4 A11
A12
28
A13
29
A14
3
2 A15
A16
30
A17
31
VPP
D0
D1
D2
D3
D4
D5
D6
D7
CS
A18
GND
P_A20
13
14
15
17
18
19
20
21
P_D0
P_D1
P_D2
P_D3
P_D4
P_D5
P_D6
P_D7
22
NCS2
24
ROE1
+5V
P_A1
P_A2
P_A3
P_A4
P_A5
P_A6
P_A7
P_A8
P_A9
1-5D
P_A10
P_A11
P_A12
P_A13
P_A14
P_A15
P_A16
P_A17
P_A18
P_A19
32
VCC
12
11
10
9
8
7
6
5
27
26
23
25
4
28
29
3
2
30
31
A0
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
A12
A13
A14
A15
A16
A17
A18
16
GND
27C040
VPP
D0
D1
D2
D3
D4
D5
D6
D7
CS
OE
VCC
1
P_A20
13
14
15
17
18
19
20
21
P_D0
P_D1
P_D2
P_D3
P_D4
P_D5
P_D6
P_D7
22
NCS2
24
ROE2
+5V
P_A1
P_A2
P_A3
P_A4
P_A5
P_A6
P_A7
P_A8
P_A9
P_A10
P_A11
P_A12
P_A13
P_A14
P_A15
P_A16
P_A17
P_A18
P_A19
1-5C
32
12
11
10
9
8
7
6
5
27
26
23
25
4
28
29
3
2
30
31
A0
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
A12
A13
A14
A15
A16
A17
A18
16
GND
27C040
U17
VPP
D0
D1
D2
D3
D4
D5
D6
D7
CS
1
P_A20
13
14
15
17
18
19
20
21
P_D8
P_D9
P_D10
P_D11
P_D12
P_D131-5B
P_D14
P_D15
22
NCS2
P_A1
P_A2
P_A3
P_A4
P_A5
P_A6
P_A7
P_A8
P_A9
P_A10
P_A11
P_A12
P_A13
P_A14
P_A15
P_A16
P_A17
P_A18
P_A19
24
OE
12
11
10
9
8
7
6
5
27
26
23
25
4
28
29
3
2
30
31
A0
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
A12
A13
A14
A15
A16
A17
A18
16
GND
+5V
32
VCC
1
VPP
13
P_D8
14
P_D9
15
P_D10
17
P_D11
18
P_D12
191-5A P_D13
20
P_D14
21
P_D15
D0
D1
D2
D3
D4
D5
D6
D7
24
32
VCC
27C040
ROE1
[ 2, C-3 ]
P_D [ 15:8 ]
P_D [ 7:0 ]
TP11
R-INPUT
11
12
13
15
16
17
18
19
D0
D1
D2
D3
D4
D5
D6
D7
1-4D
C79
10uF
RT_IN
LT_IN
VOL
CREF
C46
.1uF
+
1
3
4
2
RT_OUT
LT_OUT
VS
1-4C
GND
TDA8199
NS
NS
+5A
C76 10uF
+
NS
R13
100K
.1uF
+
-5A
R316
1
2
3
4
5
6
1-4A
POT 1A
POT 1B
POT 1C
4
1X6
NS
R25
VOLUME
-5A
2.2K
R14
22
+5V
22K
28
GND
VCC
27256/27512
R19
U100
5
1
3
NCS0
NCS1
+
R510
2
1-3E
1-3D
NS
C102
100uF
1-3C
C106
.1uF
R100
470
VIN
NS
1-3B
NS NS
R9
The circuit(s) continue at the address shown [ #-XY ].
# = Sheet Number (3-5), X = Column Grid, Y = Row Grid
R315
R21
+5A
4.7K
C50 2200pF
C34 .1uF
+
1
3
1-2E
2
GND
VDD
BCK
AOR
DATA VREF
WS
AOL
U30B
5
8
6
7
5
+5A
8
+VS
D102
1N4004
8
2
V+
3
A
R24
47K
C80
2200pF
4
1-1D
470
R106
+
10K
VIN
C108
22uF
CN4
2
OUT
-VS
3 TDA2030A
D103
1N4004
C78 10uF
+
KEY PIN 5
R107
1
+5A
1+
12+
23+
3-
470
+VS
+
33K
VIN
2
1-2A
R110
1
VIN
D104
1N4004
C123
.1uF
R109
39K
+12V
C117
.1uF
C111
.1uF
R108
+
U102
C116
220uF
1
2
3
4
5
6
7
SPEAKER
C113
.1uF
1-2B
+
C114 10uF
5
C115
22uF
2
4
OUT
-VS
3 TDA2030A
D105
1N4004
R111
1
-12V
1
VREFA
AOL
C119
220uF
TP16
LM833 VR7
1.5K
R105
1X7
2.2K
U30A
C122
.1uF
4
C112
100uF
47K
+
C33
.1uF
C110
.1uF
R22
R8
1K
-5A
R16
3
1-3A
-12V
C48 2200pF
WS
[ 2, C-2 ]
SND_DATA
[ 2, C-2 ]
SND_CLK
[ 2, C-2 ]
C103
.1uF
1
VIN
1-2C
4
TDA1543
NS
7
1-2D
LM833 V-
6
C109
100uF
V+
B
R103
1
NS NS
22K
U101
2.2K
U26
4
D101
1N4004
R104
+
5
C35 10uF
NSC105
.1uF
+
C107 10uF
+12V
R17
+
NS
4
-VS
3 TDA2030A
C104
NS100uF
C101
22uF
0
[ #, X-Y ] going
to ...
+
NS
2
-12V
[ #, X-Y ] coming
from ...
NS
R101
R102
22K
NSOUT
+VS
D100
1N4004
NS
22K
1
VIN
+12V
Jumper
1X3
JP4
NSC100 10uFNS
+
NS
100K
C75 2200pF
NRD / NOE
[ 2, C-1: 1, G-1: 1, I-4 ]
+3.3V
1-1E
NS
C45
1-4B
NS
C52NS
C77 10uF
.1uF
2.2K
20
CS
OE
100K
8
5
7
6
CN3 NS
NS
R112
NS
R12
100K
0
A15
14
P_D0
P_D1
P_D2
P_D3
P_D4
P_D5
P_D6
P_D7
NS
U35
22K
P_A1
P_A2
P_A3
P_A4
P_A5
P_A6
P_A7
P_A8
P_A9
P_A10
P_A11
P_A12
P_A13
P_A14
P_A15
NS
AOR
U7
10
A0
9
8 A1
A2
7
A3
6 1-4E
A4
5
A5
4
A6
3
A7
25
A8
24
A9
21
A10
23
2 A11
A12
26
A13
27
A14
1
P_D [7..0]
[ 2, F-2 ]
-5A
Test Point
NS
AO/NLB [ 2, G-2 ]
5
NCS2
[ 1, I-4: 2, C-2 ]
ROE2
[ 2, C-3 ]
+5V
22
CS
OE
27C040
P_A20
Test Point
-5A
+
C120
.1uF
C118
.1uF
C124
.1uF
Sheet 1 of 4 :
R15
1K
Processor / Sound (Microcontroller)
1-1A
1-1C
1-1B
®
Schematic Set
Sheet 1 of 4
SIZE
D
1
REV.
A
CPU/Sound Bd. II
w/ ATMEL Processor
SPI Part Nº: 520-5300-00
NS: Not Stuffed
NOTES: R ALL RESISTOR VALUES ARE IN OHMS ( W ), 1/4W, 5%, UNLESS OTHERWISE SPECIFIED.
R ALL CAPACITOR VALUES ARE IN MICROFARADS ( mF ), UNLESS OTHERWISE SPECIFIED. R 0.1 mF BYPASS CAPACITORS FOR ALL INTEGRATED CIRCUITS (ICs).
E
Printed Circuit
Boards (PCBs)
D
C
B
Prepared By: CES Inc. Edited By: SPI Inc.
Model: RHT SCH1008 Dated: 06/13/03
A
Section 5, Chapter 4
Page 133
Sec. 5: PCBs
16
OE
1
A
U21
U36
U37
P_A1
P_A2
P_A3
P_A4
P_A5
P_A6
P_A7
P_A8
P_A9
P_A10
P_A11
P_A12
P_A13
P_A14
P_A15
P_A16
P_A17
P_A18
P_A19
B
C P U / S o u n d B o a r d I I ( w i t h AT M E L P r o c e s s o r ) S c h e m a t i c ( S h e e t 2 o f 4 )
J
I
H
VDD IO
3
Test Point
+3.3V
VIN
VOUT
1
R504
100K
2
ADJ
C427
.1uF
LT1086
5
F
+3.3V
TP1
+3.3V
U405
+5V
G
2-5J
+
C428
1000uF
R505
100K
R506
100K
R507
100K
R465
100
2-5I
U403
2-5H
LED2
[ 1, G-4 ]
[ 1, G-4 ]
RED
LED
P14/TXD0
P21/TXD1
SRXD0
SRXD1
RST OUT
[ 1, F-5 ]
P8
+3.3V
+3.3V
2-5F
2-5G
18
17
16
15
14
13
12
11
B0
B1
B2
B3
B4
B5
B6
B7
A0
A1
A2
A3
A4
A5
A6
A7
2
3
4
5
6
7
8
9
20
10
VCC DIR
GND OE
74HC245
1
19
STXD0
STXD1
R466
+3.3V
LED1
100
RED
LED
R480
10K
U406
+3.3V
2
RST_IN
4
+5V
GND
+3.3V
GND
[ F1-F6> 4, I-2: 4, I-1 ]
C429
.1uF
2-4H
2-4I
2-4G
1
4
NS
2
VDDCORE
VDDCORE
3
+
SW200
C431+
1.0 uF
C432+
10uF
C433
1.0uF
+3.3V
NS
R501
3
1
VOUT
C2-
8
2
C1-
GND
7
3
C1+
C2+
6
4
VIN
SHDN/SS
5
+
C430
1.0uF
C442
10uF
+3.3V
RESET
TEST PADS
SW200
+
LT1503
+5V
10K
2
2-4F
U219
S1
4
2x5
Test Point
NS
S2
+3.3V
2
4
6
8
10
TP8
2-4J
1
1
3
5
7
9
STXD0
SRXD0
STXD1
SRXD1
FER_BEAD
1
4
3
CN9
F1
DS1233
VCC
RESET#
GND
[ 1, G-4 ]
[ 1, H-4 ]
[ 1, H-4 ]
P15/RXD0
P22/RXD1
NRST
+5V
+5V
NS
3
R400
4.7K
U413
R313
0
1
2
3
4
2-3J
NS NS
R314
0
PBRST
TD
TOL
GND
VCC
ST
RST
RST
[ #, X-Y ] coming
from ...
+5V
8
7
6
5
2-3I
[ #, X-Y ] going
to ...
The2-3G
circuit(s) continue at the address shown [ #-XY2-3F].
# = Sheet Number (3-5), X = Column Grid, Y = Row Grid
2-3H
[ 3, J-2 ]
BSEL
RESET# [ 3, A-2: 4, J-2: 2, A-2]
IORESET [ 3, A-2 ]
DS1232
R475
0
NS
U412
P_A5
P_A4
P_A3
P_A2
P_A1
[ 1, I-4 ] NCS3
P_A [16:1]
[ 1, J-2: 2, C-3 ]
2
ADDRESS
BUS
OF ARM
2-2J
P_A1
P_A2
P_A3
P_A4
P_A5
P_A6
P_A7
P_A8
P_A9
P_A10
P_A11
P_A12
P_A13
P_A14
P_A15
P_A16
P_D0
P_D1
P_D2
P_D3
+3.3V
[ 1, I-4:
1, J-1: NWR0/NWE
2, C-2 ]
P_D4
P_D5
P_D6
P_D7
2-2IP_A16
P_A15
P_A14
P_A13
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
A4
A3
A2
A1
A0
CS#
I/O0
I/O1
I/O2
I/O3
VDD
VSS
I/O4
I/O5
I/O6
I/O7
WE#
A15
A14
A13
A12
NC
NS
A5 44
A6 43
A7 42
OE# 41
BHE# 40
BLE# 39
I/O15 38
I/O14 37
I/O13 36
I/O12 35
VSS 34
VDD 33
I/O11 32
I/O10 31
I/O9 30
I/O8 29
NC 2-2H28
A8 27
A9 26
A10 25
A11 24
NC 23
P_A6
P_A7
P_A8
P_D15
P_D14
P_D13
P_D12
+3.3V
NRD/NOE [ 1, G-1: 1, I-4, 2, C-1 ]
NWR1/NUB [ 1, H-4 ]
[ 1, E-4 ]
A0/NLB
P_D [15..0]
[ 1, A-4: 1, F-2 ]
P_D0
P_D1
P_D2
P_D3
P_D4
P_D5
P_D6
P_D7
P_D8
P_D9
P_D10
P_D11
P_D12
P_D13
P_D14
P_D15
P_D11
P_D10
P_D9
P_D8
2-2G
P_A9
P_A10
P_A11
P_A12
IDT71V016SA
SOJ44
DATA
BUS
OF ARM
2-2F
BATTERY
TIE WRAP
SLOTS
BYPASS CAPACITORS
+5V
Sec. 5: PCBs
C1
.1uF
+5V
C2
.1uF
C3
.1uF
C4
.1uF
C9
.1uF
+5V
C18
.1uF
C24
.1uF
C272
.1uF
C273
.1uF
C274
.1uF
C275
.1uF
C276
.1uF
C277
.1uF
NS
C278
.1uF
C279
.1uF
C280
.1uF
C281
.1uF
C282
.1uF
ZF4
MTG_SLOT
1
ZF5
+5V
2-1J
2-1I
+3.3V2-1H
2-1G
2-1F
MTG_SLOT
C283
.1uF
C284
.1uF
C285
.1uF
J
Section 5, Chapter 4
Page 134
C286
.1uF
C287
.1uF
C288
.1uF
C289
.1uF
I
C291
.1uF
C292
.1uF
C436
.1uF
H
C437
.1uF
C438
.1uF
C439
.1uF
C440
.1uF
C441
.1uF
G
C443
.1uF
C444
.1uF
F
Printed Circuit
Boards (PCBs)
C P U / S o u n d B o a r d I I ( w i t h AT M E L P r o c e s s o r ) S c h e m a t i c ( S h e e t 2 o f 4 )
E
D
C
B
D [7..0] [ 3, A-2 & 4, J-2 ]
U404
+3.3V
R462
100K
R463
100K
[ 1, F-5 ]
[ 1, F-5 ]
[ 1, F-5 ]
[ 1, F-5 ]
[ 1, F-5 ]
[ 1, F-5 ]
[ 1, F-5 ]
[ 1, F-5 ]
R464
100K
TP2
Test Point
[ 1, F-5 ]
A
P0
P0
2-5E
P0
2-5D
TP5
TP3
P1
P1
[ 1, F-5 ]
P2
P2
2-5C
+5V
Test Point
Test Point
[ 1, F-5 ]
P16
P17
P18
P19
P20
P23
P24
P25
P16
P17
P18
P19
P20
P23
P24
P25
P1
18
17
16
15
14
13
12
11
2-5B
20
10
Q
Q
A0
A1
A2
A3
A4
A5
A6
A7
2
3
4
5
6
7
8
9
VCC DIR
GND OE
1
19
B0
B1
B2
B3
B4
B5
B6
B7
D0
D1
D2
D3
D4
D5
D6
D7
Test Point
P2
E
E
E# [ 3, J-3 ]
+5V
D
3
CLK
1
4
CLR VCC
PRE GND
74LS74A
D2
D1
D0
D3
D7
D6
D5
D4
DATA
BUS OF
68B09E
TO XILINX
Q [ 3, J-2 ]
U407A
5
2-5A
[ 3, C-1 & 4, J-2 ]
PLIN
74HC245
TP7
TP4
Test Point
2
DATA
BUS
OF 68B09E
U407B
5
6
Q
Q
+5V
14
7
12
D
11
CLK
13
10
CLR VCC
PRE GND
74LS74A
Q
Q
9
8
E [ 3, J-2 ]
R468
100K
2-4D
8MHZ
+3.3V
14
7
+5V
2-4E
+3.3V
+5V
R469
100K
4
2-4B
2-4C
Q#
2-4A
X_P11
P11
[ 1, F-5 ]
X_P12
P12
[ 1, F-5 ]
+3.3V
C445
.1uF
C446
.1uF
C447
.1uF
C448
.1uF
C449
.1uF
C450
.1uF
[ #, X-Y ] coming
from ...
C451
.1uF
GROUND POSTS
ZG2
ZG7
2
1X2
1
2
1X2
1
2
1X2
ZG3
1
ZG8
ZG4
1
2-3E
2
1X2
2
1X2
1
ZG5
1
U414
2
1X2
2-3D
2-3C
[ 1, A-5 ]
ROE2
ZG11
2
1X2
1
2
1X2
[ 1, J-2: 2, J-2 ] P_A1
ZG6
1
2
1X2
[ 1, A-4 ]
ROE1
[ 1, E-2 ] SND_DATA
[ 1, E-2 ]
WS
[ 1, E-2 ]
SND_CLK
MOUNTING HOLES
P_D0
P_D15
P_D14
P_D1
P_D2
P_D13
P_D12
P_D3
MH1
1
2
MH4
1
2
1
2
Mounting Hole
[ 1, F-4 ]
1
2
P_D5
P_D11
P_D4
2-2C
P_D10
Mounting Hole
MH5
MH2
1
2
1
2
1
2
Mounting Hole
[ 1, J-1: 1, I-4: 2, I-2 ] NWR0/NWE
Mounting Hole
MH6
1
2
1
2
P_D9
P_D8
1
2
MH3
1
2
Mounting Hole
8MHZ
40MHZ
2-2D
2-2E
P_D6
P_D7
[ 3, A-2 ]
A0
[ 1, A-5: 1, I-4 ] NCS2
[ 1, J-3 ]
P_A21
1
2
Mounting Hole
[ 1, G-1: 1, I-4: 1, D-3 ]
[ 1, J-3 ]
NRD/NOE
P_A22
FIDUCIALS
ZF1
+3.3V
+3.3V
ZG10
ZF2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
2-3B
I/O1
NC1
I/O/GTS1
I/O/GTS2
VCC1
I/O2
NC2
I/O3
I/O4
I/O5
I/O6
I/O7
I/O8
I/O9
I/O10
I/O11
I/O12
I/O13
NC3
I/O14
GND1
I/O/GCK1
I/O/GCK2
GND2
I/O15
VCC2
I/O/GCK3
I/O16
I/O17
I/O18
GND3
I/O19
I/O20
NC5
I/O21
I/O22
I/O23
VCC3
I/O24
I/O25
I/O26
I/O27
NC6
GND4
TDI
NC7
TMS
TCK
I/O28
I/O29
VCC4
I/O30
I/O31
I/O32
I/O33
I/O34
VCC5
I/O35
I/O36
I/O37
I/O38
GND5
I/O39
I/O40
I/O41
I/O42
I/O43
I/O44
GND6
I/O45
I/O46
I/O47
NC8
I/O48
GND7
I/O49
I/O50
I/O51
I/O52
2-2B
NC9
I/O53
I/O54
TDO
GND8
I/O55
I/O56
I/O57
VCC6
I/O58
I/O59
I/O60
I/O61
I/O62
I/O63
I/O64
I/O65
I/O66
VCC7
I/O/GSR
GND9
2-1D
TOOLING HOLES
[ 1, H-4 ]
[ 1, F-5 ]
[ 1, F-5 ]
[ 3, A-2 ]
Q#
RST_IN
RST_OUT
INT#
J_RST
DPSW
RESET#
[ 3, E-3 ]
[ 1, G-5 ]
[ 3, C-1: 4, J-2 ]
[ 2, H-3: 3, A-2: 4, J-2 ]
X_P11
X_P12
D0
D1
D2
D3
D4
D5
2
2-2A
D6
D7
XTDO
BUSY
[ 4, J-2 ]
Xilinx
JTAG
1
2
3
4
5
6
Sheet 2 of 4 :
XILINX®
+3.3V
Processor Memory /
Regulators & Bypass Capacitors
2-1A
2-1C
XTCLK
XTDO
XTDI
XTMS
2-1B
®
Schematic Set
Sheet 2 of 4
SIZE
D
1x6
TH2
NWDOVF
P5
P6
SNDSTB
XC9572XL
J2
ZF3
2-1E
TH1
3
2-3A
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
TH3
1
REV.
A
CPU/Sound Bd. II
w/ ATMEL Processor
SPI Part Nº: 520-5300-00
NS: Not Stuffed
NOTES: R ALL RESISTOR VALUES ARE IN OHMS ( W ), 1/4W, 5%, UNLESS OTHERWISE SPECIFIED.
R ALL CAPACITOR VALUES ARE IN MICROFARADS ( mF ), UNLESS OTHERWISE SPECIFIED. R 0.1 mF BYPASS CAPACITORS FOR ALL INTEGRATED CIRCUITS (ICs).
E
Printed Circuit
Boards (PCBs)
D
C
B
Prepared By: CES Inc. Edited By: SPI Inc.
Model: RHT SCH1008 Dated: 06/13/03
A
Section 5, Chapter 4
Page 135
Sec. 5: PCBs
1
[ #, X-Y ] going
to ...
The circuit(s) continue at the address shown [ #-XY ].
# = Sheet Number (3-5), X = Column Grid, Y = Row Grid
C P U / S o u n d B o a r d I I ( w i t h AT M E L P r o c e s s o r ) S c h e m a t i c ( S h e e t 3 o f 4 )
J
[ #, X-Y ] coming
from ...
I
H
F
U212
[ #, X-Y ] going
to ...
JP1
The circuit(s) continue at the address shown [ #-XY ].
# = Sheet Number (3-5), X = Column Grid, Y = Row Grid
8K 2
32K
3
1
+5V
3-5I
3-5J
A0
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
A12
R306
+5V
10K
1X3
Jumper
3-5H
3-5G
10K
L201
10K
10K
R414
220
10K
+5V
+5V
10K
5
G
U211
28
20
VCC CLK
11
10
GND
BAT1
4.5V
BAT3
J1
RAMCS#
22
E#
27
RW
62256
R432
3-4F
RW
U210
R300
1
VPP
A0
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
A12
A13
+5V
GND
13
14
15
17
18
19
20
21
D0
D1
D2
D3
D4
D5
D6
D7
E#
22
CS
ROMCS#
24
OE
E#
3-3I
VCC
16
D0
D1
D2
D3
D4
D5
D6
D7
3-3J
20
3-4G
32
3
3-5F
10K
0
[ 2, C-5 ]
D0
D1
D2
D3
D4
D5
D6
D7
GND
A15
R299
10K
NS
XA5
11
12
13
15
16
17
18
19
C290
.1uF
+5V
+5V
10K
14
x3 AA
CELLS
3-4H
R431
R/W
VCC
1N5817
A15
1
OE
74LS374
VBATT
D0
D1
D2
D3
D4
D5
1
3
4
7
8
13
14
17
18
1N5817
D201
1
D0
D1
D2
D3
D4
D5
D6
D7
1X2
Q0
Q1
Q2
Q3
Q4
Q5
Q6
Q7
2
2
5
6
9
12
15
16
19
3-4I
3-4J
CS
OE
BSEL
+5V
4
D0
D1
D2
D3
D4
D5
D6
D7
2
R305
R303
R304
R301
R302
XA0
XA1
XA2
XA3
XA4
XA5
A0
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
A12
A13
A14
D200
+5V
RED
LED
10
9
8
7
6
5
4
3
25
24
21
23
2
26
1
3-3H
A14
A15
A16
A17
A18
27C040
12
11
10
9
8
7
6
5
27
26
23
25
4
28
29
3
2
30
31
A0
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
A12
A13
XA0
XA1
XA2
XA3
XA4
AVMA
RW
3-3G
AVMA
RW
3-3F
[ 2, C-4 ]
[ 2, C-4 ]
Q
E
[ 2, H-3 ]
BSEL
A [ 15:0 ]
XA0
XA [ 5:0 ]
E
Q
XA0
BSEL
2
3-2J
U213
3-2G
3-2H
3-2I
U215B
D7
12
11
CLK
RESET#
+5V
13
10
CLR VCC
PRE GND
74AHCT74
BSEL
D
Q
Q
L200
R312
9
8
U215A
+5V
330
+5V
RED
LED
14
7
AVMA
2
Q
3
+5V
1
4
D
CLK
Q
Q
CLR VCC
PRE GND
74AHCT74
VMA
5
6
A15
A14
A13
+5V
E#
Q
VMA
RW
14
7
A11
A12
A0
A0
12
D
POUT
11
CLK
+5V
13
10
Q
Q
Sec. 5: PCBs
CLR VCC
PRE GND
74AHCT74
0
9
8
+5V
NS
R311
2
3
POUT
PLIN
J
Section 5, Chapter 4
Page 136
1
4
D
CLK
Q
Q
CLR VCC
PRE GND
74AHCT74
1
2
3
4
5
6
7
8
9
11
I1
I2
I3
I4
I5
I6
I7
I8
I9
I10
20
01
I/02
I/03
I/04
I/05
I/06
I/07
08
19
18
17
16
15
14
13
12
+5V
ROMCS#
RAMCS#
IOPORT
A9
A10
ROMCS#
RAMCS#
IOPORT
A9
A10
SNDSTB
SNDSTB
XA0
XA0
IOSTB
IOSTB
MPIN
MPIN
0
U214
TP17
PLASMA_RESET
5
6
3-2F
VCC
PAL16V8Q
14
7
U216A
+5V
GND
PRES
Test Point
3-1J
10
R310
U216B
1
A10
A10
ROMCS#
3-1I
PSTB
A8
A9
A10
1
2
3
A
B
C
A12
6
4
5
G1
G2A
G2B
8
GND VCC
74LS138
A7
3-1H
3-1G
+5V
14
7
Y0
Y1
Y2
Y3
Y4
Y5
Y6
Y7
SWLO
DPSW
BSEL
SWSTB
SWM
PLIN
POUT
STATUS
+5V
15
14
13
12
11
10
9
7 3-1F
SWLO
DPSW
BSEL
SWSTB
SWM
PLIN
POUT
STATUS
16
PRES
PSTB
PLIN
RESET#
I
H
G
F
Printed Circuit
Boards (PCBs)
C P U / S o u n d B o a r d I I ( w i t h AT M E L P r o c e s s o r ) S c h e m a t i c ( S h e e t 3 o f 4 )
E
D
C
B
A
D3
+5V
1K
1K
1K
1K
1K
1K
R280
1K
1K
1K
R278
R279
1N4004
R286
R285
R284
R283
R282
39K
39K
39K
39K
39K
39K
39K
39K
220
10
74HC245
C254 470pF
20
5
1
2
3
4
5
6
7
8
9
10
11
12
3-5A
KEY PIN 5
C253 470pF
GND
+5V
R287
R288
R289
R290
R291
R292
R293
R294
R295
C252 470pF
DIR
OE VCC
18
17
16
15
14
13
12
11
C250 470pF
B0
B1
B2
B3
B4
B5
B6
B7
C251 470pF
1
19
A0
A1
A2
A3
A4
A5
A6
A7
3-5B
C249 470pF
SWLO
2
3
4
5
6
7
8
9
C247 470pF
RW
D0
D1
D2
D3
D4
D5
D6
D7
3-5C
C248 470pF
U206
3-5D
R281
CN6
3-5E
1X12
MPIN
C255
.1uF
RAMCS#
D [ 7:0 ]
3-4E
3-4D
4
3-4B
3-4C
3-4A
RW
U207
Test Point
C263 470pF
C262 470pF
C260 470pF
12
14
16
18
20
11
13
15
17
19
9
+5V
470pF
OE GND
74HC245
10
C271
20
470pF
VCC
3
3-3A
C270
18
17
16
15
14
13
12
11
470pF
IOPORT 19
3-3B
B0
B1
B2
B3
B4
B5
B6
B7
A0
A1
A2
A3
A4
A5
A6
A7
DIR
470pF
2
3
4
5
6
7
8
9
1
C268
+5V
IOSTB
FIRQ
TP12
XA0
BSEL
U208
3-3C
INT#
E
Q
1
3
5
7
2x10
C269
E
Q
10
2
4
6
8
IOPORT
R298
10K3-3D
470pF
+5V
C261 470pF
INT#
C259 470pF
19
74HC245
+5V
RESET#
[ 2, 3-A ]
OE
CN1
RW
C267
E
Q
HALT
RST
68B09E
34
35
40
37
GND
1
C258 470pF
39
1
10
DIR
470pF
TSC
GND
VCC
C266
2
4
3
20
+5V
C256 470pF
7
NMI
FIRQ
IRQ
R297
10K
R296
10K
2
3
4
5
6
7
8
9
C257 470pF
VCC
D0
D1
D2
D3
D4
D5
D6
D7
A0
A1
A2
A3
A4
A5
A6
A7
470pF
31
30
29
28
27
26
25
24
B0
B1
B2
B3
B4
B5
B6
B7
470pF
LIC
AVMA
3-3E
R/W
BA
BS
BUSY
D0
D1
D2
D3
D4
D5
D6
D7
18
17
16
15
14
13
12
11
C265
38
36
32
6
5
33
A0
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
A12
A13
A14
A15
A [ 15:0 ]
AVMA
RW
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
MPIN
A0
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
A12
A13
A14
A15
D0
D1
D2
D3
D4
D5
D6
D7
+5V
C264
U209
A0
A10
D [7..0]
[ 2, A-5: 4, J-2 ]
[ 2, C-2 ]
A0
SNDSTB [ 2, A-3 ]
3-2E
3-2D
ROMCS#
RAMCS#
IOPORT
3-2C
IORESET
R412
1K
A9
A10
R413
10K
SNDSTB
Q10
2N3904
[ #, X-Y ] coming
from ...
XA0
[ #, X-Y ] going
to ...
MPIN
3-1E
3-1D
3-1C
MPIN
[ 4, J-2 ]
DPSW
[ 2, A-2: 4, J-2 ]
SWSTB
SWM
PLIN
POUT
STATUS
[ 4, J-2 ]
[ 4, J-2 ]
[ 2, A-5: 4, J-2 ]
[ 4, J-2 ]
[ 4, J-2 ]
Sheet 3 of 4 :
Program Memory
3-1A
3-1B
®
Schematic Set
Sheet 3 of 4
SIZE
PRES
PSTB
PLIN
RESET#
PRES
PSTB
D
[ 4, J-2 ]
[ 4, J-2 ]
1
REV.
A
CPU/Sound Bd. II
w/ ATMEL Processor
SPI Part Nº: 520-5300-00
NS: Not Stuffed
NOTES: R ALL RESISTOR VALUES ARE IN OHMS ( W ), 1/4W, 5%, UNLESS OTHERWISE SPECIFIED.
R ALL CAPACITOR VALUES ARE IN MICROFARADS ( mF ), UNLESS OTHERWISE SPECIFIED. R 0.1 mF BYPASS CAPACITORS FOR ALL INTEGRATED CIRCUITS (ICs).
E
Printed Circuit
Boards (PCBs)
D
C
B
Prepared By: CES Inc. Edited By: SPI Inc.
Model: RHT SCH1008 Dated: 06/13/03
A
Section 5, Chapter 4
Page 137
Sec. 5: PCBs
The circuit(s) continue at the address shown [ #-XY ].
# = Sheet Number (3-5), X = Column Grid, Y = Row Grid
IOSTB
SWLO
DPSW
BSEL
SWSTB
SWM
PLIN
POUT
STATUS
2
2, A-2: 2, H-3: 4, J-2 ]
RESET# [3-2A
IORESET [ 2, H-3 ]
3-2B
C P U / S o u n d B o a r d I I ( w i t h AT M E L P r o c e s s o r ) S c h e m a t i c ( S h e e t 4 o f 4 )
J
I
H
G
F
10K
C200
R222
R223
R220
R221
C215 470pF
1
19
PLIN
-12V
3
3
7905C
+
2
2
470pF
470pF
470pF
470pF
470pF
470pF
RESET#
RESE
GND
SWSTB
SWS
DPSW
DP
D [7..0]
D [7
RESET#
POUT
3
4
7
8
13
14
17
18
D0
D1
D2
D3
D4
D5
D6
D7
4-4G
4-4F
4.7K
R243
R409
NS
C230 470pF
C408 470pF
NS
+5V
PSTB
PRES
PLIN
MPIN
SST0
BUSY
18
174-3GB0
16 B1
15 B2
14 B3
13 B4
12 B5
11 B6
+5V
20
10
C219 470pF
C217 470pF
A0
A1
A2
A3
A4
A5
A6
A7
2
3
4
5
6
7
8
9
VCC DIR
GND OE
74HC245
1
19
B7
D3
D4
D5
D6
D7
D2
D1
D0
4-3F
STATUS
+5V
4-2I
VR1
-5A
D[7
ADC
D [7..0]
STATUS
POUT
RESET#
PLIN
SWSTB
DPSW
SWM
MPIN
SST0
BUSY
PRES
PSTB
4-2J
2
10
(D0)1D
(D1)2D
(D2)3D
(D3)4D
(D4)5D
(D5)6D
(D6)7D
(D7)8D
1
11
4-3H
C216 470pF
The circuit(s) continue at the address shown [ #-XY ].
# = Sheet Number (3-5), X = Column Grid, Y = Row Grid
[ 2, A-5: 3, A-2 ]
[ 3, C-1 ]
[ 3, C-1 ]
[ 2, H-3: 3, A-2 ]
[ 2, A-5: 3, C-1 ]
[ 3, C-1 ]
[ 2, A-2: 3, C-1 ]
[ 3, C-1 ]
[ 3, C-1 ]
[ 1, G-3 ]
[ 2, A-2 ]
[ 3, C-1 ]
[ 3, C-1 ]
1Q(Q0)
2Q(Q1)
3Q(Q2)
4Q(Q3)
5Q(Q4)
6Q(Q5)
7Q(Q6)
8Q(Q7)
4.7K
C229 470pF
220
220
220
220
220
C218 470pF
10K
R228
R229
R230
R231
R232
R233
going
to ...
[ #, X-Y ]
VCC DIR
GND OE
74HC245
B7
20
10
+5V
D [ 7..0 ]
4-5F
U202
4-3I
[ #, X-Y ] coming
from ...
2
5
6
9
12
15
16
4-4H
19
R242
C214 470pF
C212 470pF
C213 470pF
C211 470pF
C210 470pF
10K
10K
R226
10K
R227
10K
R224
R225
3
D0
D1
D2
D3
D4
D5
D6
D7
74HCT273
+5V
4-3J
VCC (MR#)CLR#
CP
C220 470pF
R218
R219
R216
R217
20
4-4I
4-4J
2X13
2
3
4
5
6
7
8
9
U201
+5V
470
4.7K
4.7K
4.7K
4.7K
4.7K
4.7K
4.7K
+5V
4.7K
470pF
220
220
220
220
220
220
220
NS
A0
A1
A2
A3
A4
A5
A6
A7
18 4-5G
17 B0
16 B1
15 B2
14 B3
13 B4
12 B5
11 B6
4-5H
470pF
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
NS
U200
NS220
NS
C201
NS
C202
NS
C203
NS
C204
NS
C205
NS
C206
NS
C207
NS
10K
10K
10K
10K
10K
10K
NS
R201
NS
R202
NS
R203
NS
R204
NS
R205
NS
R206
NS
R207
NS
CN8
C209 470pF
4
R208
R209
R210
R211
R212
R213
R214
R215
4-5I
4-5J
C208 470pF
5
R200
10K
+5V
FB2
FB1
4-2F
4-2G
4-2H
C29
.001uF
C30
1000uF
1
Sec. 5: PCBs
3
3
7805C
1
2
1
2
4-1J
C39
.1uF
+
C59
22uF
D2
Section 5, Chapter 4
Page 138
2
3
4
5
6
7
8
9
1N4004
I
10K
10K
R266
R267
10K
U205
D0
D1
D2
D3
D4
D5
D6
D7
4-1H
SWM
J
10K
FB5
C51
C81
470uF .001uF
4-1I
+
C47
.1uF
FB6
1
R265
1X6
POWER
VR2
10K
KEY PIN 5
+12VDC
+12V
+5A
+5V
1
2
3
4
5
6
-12VDC
R264
1N4004
+5VDC
C37
.001uF
+
10K
D1
CN2
C31
470uF
R263
C38
.1uF
R262
+
FB3
10K
FB4
10K
C49
.1uF
R260
C40
22uF
R261
1
C125 .1uF
H
1
19
A0
A1
A2
A3
A4
A5
A6
A7
B0
B1
B2
B3
B4
B5
B6
B7
4-1G
DIR VCC
OE GND
74HC245
G
18
17
16
15
14
13
12
11
20
10
4-1F
+5V
F
Printed Circuit
Boards (PCBs)
18
17
16
15
14
13
12
11
C P U / S o u n d B o a r d I I ( w i t h AT M E L P r o c e s s o r ) S c h e m a t i c ( S h e e t 4 o f 4 )
E
D
C
B
A
560
560
560
R428
R430
560
R427
1X9
R239
SWITCH
COLUMNS
Q6
2N3904
1K
R240
Q7
.01uF
4-4B
C228
Q8
2N3904
1K
.01uF
R241
4-4C
.01uF
2N3904
1K
4-4D
R429
560
Q5
2N3904
1K
4-4E
560
Q4
R238
74HCT273
1
2
3
4
5
6
7
8
9
2N3904
1K
C226
10
R237
C227
GND
1K
.01uF
2
5
6
9
12
15
16
19
C225
1Q(Q0)
2Q(Q1)
3Q(Q2)
4Q(Q3)
5Q(Q4)
6Q(Q5)
7Q(Q6)
8Q(Q7)
.01uF
(D0)1D
(D1)2D
(D2)3D
(D3)4D
(D4)5D
(D5)6D
(D6)7D
(D7)8D
KEY PIN 2
C224
3
4
7
8
13
14
17
18
CN5
Q3
2N3904
.01uF
20
C223
VCC
CP
.01uF
(MR#)CLR#
Q2
2N3904
1K
R236
.01uF
D0
D1
D2
D3
D4
D5
D6
D7
1
11
R426
2N3904
R235
RESET#
SWSTB
5
4-5A
Q1
1K
+5V
4-5B
C221
ADC
RESET#
560
4-5C
R234
U203
R425
4-5D
C222
4-5E
560
D [ 7..0 ]
R424
1N4004
R423
D408
+5V
4
4-4A
10K
10K
10K
R249
R250
R251
10K
10K
R247
10K
R246
R248
10K
10K
R244
R245
+5V
SW300
U204
D0
D1
D2
D3
D4
4-3E
D5
D6
D7
1
19
A0
A1
A2
A3
A4
A5
A6
A7
B0
B1
B2
B3
B4
B5
B6
B7
DIR VCC
OE GND
74HC245
18
17
16
15
14
13
12
11
1
2
3
4
5
6
7
8
4-3D
20
10
16
15
14
13
12
11
10
9
4-3C
4-3B
3
4-3A
SW DIP8
+5V
+5V
3
U401A
V-
3
560
560
560
R406
R407
R408
560
560
R404
D403
R418
VREF
1N4148
220
LM339AN
D404
R419
1N4148
220
220
+5V
LM339AN
V+
3
V-
12
U401C
U401B
B
6
VREF
LM339AN
VREF
4-1D
8
1N4148
D406
R421
R422
4-1C
V+
13
3
Sheet 4 of 4 :
Switch Connectors
4-1A
V-
12
Sheet 4 of 4
SIZE
D
VREF
Printed Circuit
Boards (PCBs)
A
w/ ATMEL Processor
SPI Part Nº: 520-5300-00
NS: Not Stuffed
D
1
REV.
CPU/Sound Bd. II
LM339AN
NOTES: R ALL RESISTOR VALUES ARE IN OHMS ( W ), 1/4W, 5%, UNLESS OTHERWISE SPECIFIED.
R ALL CAPACITOR VALUES ARE IN MICROFARADS ( mF ), UNLESS OTHERWISE SPECIFIED. R 0.1 mF BYPASS CAPACITORS FOR ALL INTEGRATED CIRCUITS (ICs).
E
®
Schematic Set
11
10
1N4148
4-1B
U401D
D
SWITCH
ROWS
D407
220
+5V
LM339AN
10
9
8
7
6
5
4
3
2
1
1X10
1N4148
220
7
KEY PIN 4
D405
R420
VREF
9
12
R405
560
1N4148
C406 .1uF
12
C
V-
12
10
CN7
1N4148
D402
R417
220
C404 .1uF
V+
14
11
4
1
4-1E
220
U400D
D
D401
5
A
+5V
18
17
16
15
14
13
12
11
3
2
4-2A
D400
1N4148
R416
+5V
LM339AN
4-2B
220
C
B
Prepared By: CES Inc. Edited By: SPI Inc.
Model: RHT SCH1008 Dated: 06/13/03
A
Section 5, Chapter 4
Page 139
Sec. 5: PCBs
12
+5V
V-
4-2C
VREF
8
13
2
VREF
R415
V+
V+
6
LM339AN
9
C
V-
U400C
4-2D
R403
3
12
C405 .1uF
V+
14
V-
C402 .1uF
4-2E
7
B
+5V
C409
22uF
560
+5V
3
U400B
560
V+
1
D [7..0]
+
+5V
R401
VREF
4
LM339AN
C407 .1uF
12
C403 .1uF
V-
R402
5
A
DPSW
VREF
U400A
R411
3
C401 .1uF
2
C400 .1uF
SWSTB
3.3K
+5V
V+
R410
3.3K
DPSW
2
3
4
5
6
7
8
9
U203
C275
74HCT273
Section 5, Chapter 4
Page 140
C124
C118
R111
SP3
SP2
7
SP1
R107
C123
1
C111
6
CN4
POT1
TDA8199
1
CN3
R103
+
FB5
FB6
6
C81
FB3
+
CN2
1
FB1
C29
FB2
GND
•
C79
+
+
+
FB4
C37
C30
+
C78
C51
C39
+
C18
NOTE
AOR
AOL
+
U26
TDA
1543
R15
VR1
C38
+
U30
VR2
C31
10
CN9
C436
C4
8MB
1
2
C3
C2
8MB
C1
8MB
STERN PINBALL INC.
CPU / SOUND BOARD
520-5300-00
REV A
8MB
C271
C270
C264
C265
C266
C267
C268
C269
CN1
C280
U208
U208
R304
R300
R303
R302
C281
U215
U215
C288
U209
U209
R305
R501
R402
R400
C284
( -- ) SIZE AA 1.5V ( + )
C260
C259
C261
C258
C262
C257
C279
Q10
FIRQ
U202
U207
C256
C276
C408
U202
R409
R310
R311
C278
U200 U413
U210
U210
C200
C203
C202
C205
C204
C207
C206
R314
R313
R475
1MB
JP1
R233
R232
R231
R230
R229
C230
C229
C215
C214
C213
C212
C210
C211
C208
C209
R214
R215
R212
R213
R210
R211
R208
R209
8K
32K
R412
R413
PLASMA_RESET
C216
C217
C218
C219
C220
C277
C201
U201
U201
C282
R301
C287
U213
U213
GND
BAT1
C290
R228
R227
R226
R225
R224
R243
R242
R223
R222
R221
R220
R218
R219
R216
R217
R206
R207
R204
R205
R202
R203
R200
R201
R306
R432
D200
25
1
CN8
GND
R431
VBATT
U212
U212
R299
D201
( -- ) SIZE AA 1.5V ( + )
C263
C289
U216
U216
R296
R297
C286
C283 U207
U211
U214
U214
RESET
U211
S2
GND
R401
74HC245
U30
U26
+
C48
+
C439
R16
+
C33
D1
R510
R7
C103
74HC245
1
19
LM
833
Actual Board Size
14.67” X 9.125”
C122
+
C125
C440
C50
+
C47
M27C0400I-I2FI
27C040
VOICE ROM 4
D2
M27C0400I-I2FI
27C040
VOICE ROM 3
C76
C449 C445
+
GND
•
R8
C52
512K
M27C0400I-I2FI
27C040
VOICE ROM 2
U35
C49
27256 / 27512
CPU SOUND
C40
M27C0400I-I2FI
27C040
VOICE ROM 1
R13
C446
+
U17
NOTE
C59
+
NCS0
U21
+
•
C35
C34
+
R315
U36
U17
L200
+5V
+
L201
C400
C403
R403
R404
R405
D400
D401
74AHCT74
R112
+
C77
+
R14
U37
NCS1 NCS0
R459
U36
U21
JP2
C285
C409
R406
R408
C402
D402
D403
D404
10
74HC245
C45
C46
+
C75
JP4
NCS1
•
R316
+
U7
•
•
R298
R312
•
NOTE
R12
R25
R100
+
R19
NOTE
C104
C451
C100
+
U37
C426
TE
ST
•
R414
TEST
C24
TEST
+
74AHCT74
+
+
C101
U7
U8
ATMEL
AT49BV1614
C421
C102
+
R458
R457
NOTE
C437
TP20
•
R101
+
+
+
NOTE
D100
U100
C450
C105
C412
U8
C411
C106
XC9572XL
R470
R508
C448
R21
C420
R102
+
C415
C434
C424
C425
Q
U407
U407
E
C292
R411
R410
68B09E
R9
AT91R40008
U402
ATMEL
U402
•
P2
P1
R463
P0
R456
R454
R452
R450
R448
R446
R444
R442
NOTE
•
C273
R418
R415
R417
C401
R416
D405
D406
D407
74LS138
D101
+
R104
C410
C435
C418
C419
R437
JTAG R509R502
J3
C413
C414
R464
R455
JP3
R453
EPROM
R451
R449
R447
FLASH
R445
R443
R441
ST
R260
TE
U400
C404
R422
C407
SWITCH ROWS
CN7
DS1232
R105
TP1
U414
XILINX®
R435
C112
R436
U412
PLE
SQ3300S
40.000M
00041N
+
R434
7
C431
+
GND
U400
C291
TP4 TP3 TP2
C107
1
Y1
+
C433
+
C272
U205
U205
•
C447
U414
TP8C443
1
1
U219
C9
U404
U404
R261
R262
R263
R264
R265
R266
R267
R419
1
PAL16V8Q
C109
+
C432
+
C438 C441
C442
LED1
U204
U204
C405
R420
27C040
CPU GAME
+
+
R465
•
S1
C430
C444
R504
R507
R466
R244
R245
R246
R247
R248
R249
R250
R251
U401
U401
•
C108
+
J2
Xilinx
JTAG
NOTE
LED2
74HC245
C113
+
+
C80
R480
U406
U403
+
C254
R287
U403
C252
C253
R289
R288
C249
C250
C251
R292
R291
C248
R293
R290
C255
C247
R295
R294
+
C110
F1 +3.3V
+
C429
R285
R284
R283
R282
R281
R280
R279
DS1233
U406
C428
C427
C274
R286
R278
74HC245
D103
U101
+
+
R106
•
+
R24
U405
GND_SIGNAL
LT1086
C119
U405
D408
R423
R430
R424
R429
R425
R428
U206
74HC245
R22
+
R427
R426
C406
R421
R407
TP7
TP5
74LS74
D102
+
C114
+
C116
C221
C228
C222
C227
C223
C226
TE
NO
•
+
C120
C117
+
Q8
Q7
C225
C224
TE
R110
+
C115
+
Q1
1
Q2
1
Q6
Q5
R433
R109
1
1
Q3
1
Q4
1
NO
R108
U102
D105
D104
R234
R241
R235
R240
R236
R239
1
1
1 2 3 4 5 6 7 8
KSD08H
SW300
R476 R462
R477 C417
R468 R478 C416
C423
R469
C422
R479
6264 \ MS62256
R17
R238
R237
DEDICATED SWITCH IN
ON
74HC245
NOTE
•
U203
D3
12
NOTE
ST
SWITCH COLUMNS
1
1
CN6
LM339AN
TE
CN5
GND
+
•
9
74HC245
•
011
150318
NOTE
TEST
U206
•
1
LM339AN
NOTE
2
26
PLASMA CNTLR
( -- ) SIZE AA 1.5V ( + )
Sec. 5: PCBs
1
C P U / S o u n d B o a r d I I ( w i t h AT M E L P r o c e s s o r ) C o m p o n e n t La y o u t
Test Points (TP):
TEST
TE
ST
74HCT273
ST
TE
¬FIRQ
74LS374
2
20
+5V
GND
–12
+12
TE
ST
T
TES
•
NOTE
¬VBATT
¬GND
¬S2 RESET
¬SW200
¬U402
¬JP3
¬JP3
¬JP2
¬U219
¬LED1
¬JTAG J3
¬GND
•
[ 3, G-4 ]
8K/32K
[ 3, H-5 ]
¬JP1
¬PLASMA_RESET
• TP17
TP17: [ 3, H-1 ]
•TP12
TP12: [ 3, D-2 ]
[ 2, J-3 ]
74HC245
LEDs
¬L201 / L200
¬GND[ 3, J-5 ] & [ 3, H-2 ]
¬GND
¬Q
TP5: [ 2, C-5 ]
¬E
TP7: [ 2, C-5 ]
¬P2, P1, P0
TP4, TP3, TP2: [ 2, D-5 ]
TP20: [ 1, J-2 ]
[ 1, G-5 ]
[ 1, G-1 ]
TP8: [ 2, H-4 ]
[ 2, G-5 ]
[ 1, I-5 ]
[ 1, E-3 ]
¬JP4
[ 2, C-1 ]
¬JTAG J2
XILINX
[ 2, I-5 ]
¬LED2
¬+3.3V TP1: [ 2, I-5 ]
¬GND_SIGNAL
TP11
•
¬AOL & AOR
TP16: [1, C-1],
• TP16 TP11:
[ 1, D-4 ]
Printed Circuit
Boards (PCBs)
Capacitors*
ITEM
—
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
QTY
1
4
1
1
1
1
1
1
1
1
1
1
3
4
8
52
PART NUMBER
520-5300-00
REF-DESIGNATOR
DESCRIPTION
(NS = Not Stuffed)
CPU/Sound II Board (with Atmel Processor)
Complete PCB Assembly
JP1, JP2, JP3, JP4
3-Pin Jumper & 2-Pin Cover
045-5015-06
CN2 (Key Pin-5)
6-Pin, 6PKK156
J2 JTAG Xilinx®
6-Pin, ## Header
045-5015-07
CN4 (Key Pin-5)
7-Pin, 7PKK156
J3 JTAG
7-Pin, ## Header
045-5013-00
CN5 (Key Pin-2)
9-Pin, 9PKK156
CN9
10-Pin, 0.1 Header
045-5014-01
CN7 (Key Pin-4)
10-Pin, 10PKK156
045-5015-00
CN6 (Key Pin-5)
12-Pin, 12PKK156
045-5015-01
CN1
20-Pin, 0.1 Header
045-5015-26
CN8
26-Pin, 0.1 Header
125-5043-00
C29, C37, C51
0.001uF (102), Cap.
125-5039-00
C48, C50, C75, C80
0.0022uF or 2200pF, (222), Cap.
125-5029-00
C221>C228
0.01uF (103), 100v Cap.
125-5031-00
C1>C4, C9, C18, C24, C33, C34, C38, C39, C47, C49, C110, 0.1uF (104), Axial Cer. Cap.
C111, C113, C117, C118, C120, C123, C124, C125, C255,
C272>C277, C279>C292, C400>C407, C444 (C45, C46, C52, C103, C105, C106, C122, C278: NS)
1.0uF, ##v, Radial Lytic Cap.
16
3
C430, C431, C433 (near U403, U404)
125-5017-00
C35
10uF, 16v, Radial Tant. Cap.
17
1
18
4
125-5017-00
C78, C79, C107, C114 (C76, C77, C100: NS)
10uF, 25v-35v, Radial Lytic Cap.
19
2
125-5015-00
C109, C112 (C102, C104: NS)
100uF, 25v, Radial Lytic Cap.
20
1
125-5014-00
C409
22uF, 16v, Radial Lytic Cap.
21
4
125-5020-00
C40, C59, C108, C115 (C101: NS)
22uF, 25v, Radial Lytic Cap.
22
2
125-5012-00
C116, C119
220uF, 25v, Radial Lytic Cap.
23
2
125-5019-00
C31, C81
470uF, 25v, Radial Lytic Cap.
24
39
125-5028-00
C208>C215, C216>C220, C229, C230, C247>C254,
470pF (471), Cer. Cap.
C256>C263, C264>C271 (C200>C207, C408: NS)
25
2
125-5037-00
C30, C428
1000uF, 16v, Radial Lytic Cap.
26
17
C427, C429, C436>C441, C443, C445>C451
SMT .1uF Cap.
27
2
C432, C442 (near U403 & U404)
SMT 10uF Cap.
28
9
C411, C414, C416, C419, C420, C422, C424, C434, C435 SMT 47pF Cap.
29
10
C410, C412, C413, C415, C417, C418, C421, C423, C425, C426 SMT 100nF Cap.
112-5003-00
D1>D3, D102>D105, D408 (D100, D101: NS)
1N4004, Diode
30
7
31
2
112-5008-00
D200, D201
1N5817, Diode
32
8
112-0054-00
D400-D407
1N4148, Diode
LED1, LED2, L200, L201
LED T1-3/4 DIFFUSER LED
33
4
165-5099-00
34
3
124-5064-00
R310, R315, R316 (R300, R311, R313, R314, R475: NS) 0 Jumper Res. (1-Stripe)
35
2
121-5041-00
R107, R111 (R103: NS)
1 1/4W Res.
35
20
121-5009-00
R8, R15, R234>R241, R278>R286, R412
1K 1/4W Res.
36
1
121-5018-00
R7
1.5K 1/4W Res.
37
2
121-5043-00
R16, R17 (R25, R112: NS)
2.2K 1/4W Res.
38
2
121-5048-00
R410, R411
3.3K 1/4W Res.
39
12
121-5021-00
R21, R216>R223, R242, R243, R400
4.7K 1/4W Res.
40
36
121-5011-00
R106, R224>R228, R244>R251,R260>R267, R296>R299, 10K 1/4W Res.
R301>R306, R413, R431, R432 (R200>R207, R501: NS)
41
3
121-5023-00
R9, R14, R104 (R100, R102: NS)
22K W 1/4W Res.
42
1
121-5022-04
R110
33K 1/4W Res.
43
9
121-5045-00
R108, R287>R294
39K Res.
44
2
121-5032-00
R22, R24
47K 1/4W Res.
45
15
121-5014-00
R229>R233, R295, R414>R422 (R208>R215: NS)
220 1/4W Res.
46
1
121-5036-00
R312
330 1/4W Res.
47
2
121-5046-01
R105, R109 (R101, R409: NS)
470 1/4W Res.
48
16
121-5047-00
R401>R408, R423>R430
560 1/4W Res.
49
1
F1
SMT xx Res.
50
4
R434, R435, R436, R508
SMT 1K Res.
51
1
R480
SMT 10K Res.
52
2
R502, R509
SMT 33 Res.
53
3
R465, R466, R470
SMT 100 Res.
54
35
R433, R437, R441>R459, R462>R464, R468, R469,
SMT 100K Res.
R476>R479, R504>R507, R510
110-0069-00
Q1-Q8, Q10
2N3904, Transistor
55
9
ATMEL, AT91R40008
56
1
U402
ATMEL, AT49BV1614
57
1
U8
XILINX®, XC9572XL
58
1
U414
512K EPROM Sound (27512)
59
1 (See Pg. # Table)
U7
1MB EPROM CPU Game (27C040)
60
1 (See Pg. # Table)
U210 (32-Pin, IC Socket, 077-5217-00)
8MB EPROM Voice 1-4 (M27C0400I-12FI)
61
4 (See Pg. # Table)
U17, U21, U36, U37 (32-Pin, IC Socket, 077-5217-00)
PAL16V8Q (Programmed) BLUE DOT
62
1
965-6504-00
U213 ( BLUE DOT )
63
1
105-5046-00
U212 (28-Pin, IC Dip Socket, 077-5208-00)
6264/MS62256 (MS6264A) (28-Pin)
64
1
100-0189-01
U209 (40-Pin, IC Socket, 077-5209-00)
68B09E (40-Pin)
65
2
100-5015-00
U215, U216
74AHCT74 (14-Pin)
66
8
100-0338-00
U202, U204, U205, U206, U207, U208, U403, U404 (U200: NS) 74HC245 (20-Pin)
67
2
100-5012-00
U201, U203
74HCT273 (20-Pin)
68
1
100-0037-00
U407
74LS74 (14-Pin)
69
1
100-0148-00
U214
74LS138 (16-Pin)
70
1
100-0064-00
U211
74LS374 (20-Pin)
Test Point Wire (24ga.) Loops:
71
1
U406
3.3v Watchdog, DS1233 (3-Pin)
VBATT, GND (near CN7),
72
1
100-5023-00
U413
5.0v
Watchdog, DS1232 (8-Pin)
GND (near CN9), GND (near L200),
73
1
U219
1.8v Volt. Regulator LT1503 (8-Pin)
GND_SIGNAL (near U405)
74
1
U405
3.3v Volt. Regulator LT1086 (3-Pin)
75
1
124-5002-00
VR1
-5v Regulator, LM7905CT
Test Point Pads:
76
1
124-5001-00
VR2
+5v Regulator, LM7805CT
TP1>TP5, TP7, TP8, TP11,
77
2
100-0377-00
U400, U401
LM339AN (14-Pin)
TP12, TP16, TP17, TP20
78
1
100-0375-00
U30
LM833 (8-Pin)
79
1
100-5018-00
U26
TDA1543 (8-Pin)
80
2
100-5016-20
U101, U102 (U100: NS)
TDA2030A (5-Pin)
81
1
Y1
40MHz Clock PLE SQ3300S
82
1
181-5002-00
SW300
Dip Switch 8-Pos., (KSD08H Black)
83
n/a
FB1>FB6
Ferrite Bead
84
535-5000-10
HS2, HS3, (HS1: NS) (over U101, U102)
Heat Sink (AAVID 531102)
85
1
S2 (Reset)
Push-Button Switch (B3F4000)
86
1
545-5685-00
BAT1 HOLDER (Always replace all 3, Size AA 1.5v Cells, with new ones, when required)
If a part is required where a part number is not
provided, call Tech. Support (see back of cover).
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:::
6HF3&%V
Resistors / Transistors*
ICs / RAMs / ROMs / EPROMs
Miscellaneous
* Surface Mounts (SMT) are not listed.
Diodes
& LEDs*
* Surface Mounts (SMT) are not listed.
Connectors
&386RX QG,,%RDUGZLWK$WPHO3URFHVVRU3DUWV
3ULQWHG&LUFXLW
%RDUGV3&%V
6HFWLRQ&KDSWHU
3DJH
UK & Special App. 3X Transistor Driver Bd. Schematic
NC
NC
KEY
RED
NC
ORG-RED
ORG-BRN
ORG-BLK
PNK-WHT
Auxilliary
Driver
Board
NC
KEY
WHT
RED
BLK
BLK
ORG
Auxilliary
Driver
Board
UK & Special App. 3X Transistor Driver Bd. Component Layout (Sol. Exp. Bd.)
Sec. 5: PCBs
ITEM
QTY
PART NUMBER
REF-DESIGNATOR
DESCRIPTION
—
1
520-5068-01
Solenoid Expander (x3 Transistor) PC Board
Complete PCB Assembly
Section 5, Chapter 4
Page 142
Printed Circuit
Boards (PCBs)
UK 3X Transistor Driver Board f or Up-Posts & P/F Dot Display or LED Sign (if used)
To Playfield 19-LED Board
(Connector under the playfield)
Conn.
to I/O
Power
Driver
Board
J2
10
9
8
7
6
5
4
3
2
1
ORG-WHT
ORG-GRY
ORG-VIO
ORG-BLU
ORG-GRN
ORG-YEL
KEY
ORG-BRN
ORG-RED
ORG-BLK
ORG-YEL
ORG-GRN
ORG-BLU
ORG-VIO
ORG-GRY
ORG-WHT
ORG-BLK
ORG-RED
ORG-BRN
1
Playfield 2
Dot Display 34
or LED Sign 5
6
Not Used 7
this Game. 8
9
10
RED +5V
11
BLK GND
12
KEY
Conn.
to I/O
Power
Driver
Board
J3
PNK-WHT
12
11
10
9
8
7
6
5
4
3
2
1
To I/O Board J16-11
To I/O Board J16-5
FROM
BRN
Low Power
NC
NC
KEY
NC
RED
ORG-RED
ORG-BRN
ORG-BLK
PNK-WHT
1
2
3
4
5
6
7
8
9
Auxilliary
Driver
Board
520-5068-01
J1
J2
1
2
3
4
5
6
7
WHT
RED
BLK
BLK
ORG
Left Post 26-1200
AUX. 1
(Q1)
Center Post 23-1100
AUX. 2
(Q2)
Right Post 26-1200
AUX. 3
(Q3)
NC
KEY
Sec. 5: PCBs
+5V
20v DC
J7P1
I/O BD.
Coin Meter
02003
Printed Circuit
Boards (PCBs)
RED 1
NC 2
BLK 3
1
2
3
RED +5VDC
NC
BRN-BLK
> From existing 3-Pin
Connector in Game
Cabinet for Meter
Section 5, Chapter 4
Page 143
UK 3X Transistor Driver Board for Up-Posts & P/F Dot Display or LED Sign (if used)
with the Tournament Serial Inter face (TSI) Board
Cabinet Bottom
BETA brite® Electronic Color Message Display
Data Cable
Power
Supply
BETA brite®Power Cable
Plugs into Service Outlet
provided in the bottom of all
domestic SPI Pinball Games
To Playfield ?????
(Connector under the playfield)
J6
Conn.
to I/O
Power
Driver
Board
J2
Conn.
to I/O
Power
Driver
Board
J3
10
9
8
7
6
5
4
3
2
1
ORG-WHT
KEY
KEY
ORG-GRY
ORG-VIO
ORG-BLU
ORG-GRN
ORG-YEL
ORG-BLK
ORG-RED
ORG-BRN
PNK-WHT
BLU-WHT
GRN-WHT
BRN-WHT
PINK
GRY
VIO
BLU
GRN
YEL
ORG
BRN
12
11
10
9
8
7
6
5
4
3
2
1
10
9
8
7
6
5
4
3
2
1
12
11
10
9
8
7
6
5
4
3
2
1
J4
J1
Tournament
Serial
Interface J5
Board
520-5220-00
J2
1
2
3
4
5
6
7
8
9
10
ORG-BRN
ORG-RED
ORG-BLK
ORG-YEL
ORG-GRN
ORG-BLU
ORG-VIO
ORG-GRY
ORG-WHT
1
KEY
Playfield 2
Dot Display 34
or LED Sign 5
6
Not Used 7
this Game. 8
9
10
RED +5V
11
BLK GND
12
KEY
1 +5VDC RED
2 GND BLK
>From existing
2-Pin Cabinet
Harness
To I/O Board J16-11
To I/O Board J16-5
J3
Not
Used
J7
Optional
RS2 Printer Port
FROM
BRN
Low Power
+5V
NC
NC
KEY
NC
RED
ORG-RED
ORG-BRN
ORG-BLK
PNK-WHT
1
2
3
4
5
6
7
8
9
20v DC
J7P1
I/O BD.
Auxilliary
Driver
Board
520-5068-01
J1
J2
1
2
3
4
5
6
7
WHT
RED
BLK
BLK
ORG
Left Post 26-1200
AUX. 1
(Q1)
Center Post 23-1100
AUX. 2
(Q2)
Right Post 26-1200
AUX. 3
(Q3)
NC
KEY
Sec. 5: PCBs
Coin Meter
02003
RED 1
NC 2
BLK 3
1
2
3
RED +5VDC
NC
BRN-BLK
> From existing 3-Pin
Connector in Game
Cabinet for Meter
Order the Optional ToPS™ (Tournament Pinball System) Kit!
Call Technical Support at 1-800-542-5377 for more information
Section 5, Chapter 4
Page 144
Printed Circuit
Boards (PCBs)
Cabinet Bottom
Data Cable
®
BETA brite Electronic Color Message Display
Power
Supply
BETA brite®Power Cable
Aux. 3X Transistor Driver Board for ToPS™
with the Tournament Serial Inter face (TSI)
Board and Ticket Inter face
Plugs into Service Outlet
provided in the bottom of all
domestic SPI Pinball Games
To Playfield Special Application Dot Matrix, if used.
(Connector under the playfield)
J6
Conn.
to I/O
Power
Driver
Board
J2
Conn.
to I/O
Power
Driver
Board
J3
10
9
8
7
6
5
4
3
2
1
ORG-WHT
KEY
KEY
10
9
8
7
6
5
4
3
2
1
ORG-GRY
ORG-VIO
ORG-BLU
ORG-GRN
ORG-YEL
ORG-BLK
ORG-RED
ORG-BRN
PNK-WHT
BLU-WHT
GRN-WHT
BRN-WHT
PINK
GRY
VIO
BLU
GRN
YEL
ORG
BRN
12
11
10
9
8
7
6
5
4
3
2
1
12
11
10
9
8
7
6
5
4
3
2
1
J4
J1
Tournament
Serial
Interface J5
Board
520-5220-00
1
2
3
4
5
6
7
8
9
10
ORG-BRN
ORG-RED
ORG-BLK
ORG-YEL
ORG-GRN
ORG-BLU
ORG-VIO
ORG-GRY
ORG-WHT
KEY
1 +5VDC RED
2 GND BLK
>From existing
2-Pin Cabinet
Harness
KEY
1
2
3
4
5
6
7
8
9
10
RED +5V
11
BLK GND
12
To I/O Board J16-11
To I/O Board J16-5
J3
J2
Not
Used
J7
Optional p RS2 Printer Port
NC
RED
ORG-RED
ORG-BRN
ORG-BLK
PNK-WHT
Auxilliary
Driver
Board
520-5068-01
1
2
3
4
5
6
7
NC
KEY
WHT
BRN
NC
BLK
BLK-WHT
J2
J1
Existing GRY-GRN
wire from Game
Cabinet harness
(This is the wire
that use to go
a double stack
Flipper Switch).
Ticket Meter
RED 1
BLK 2
02003
+5VDC
RED
BRN
1
2
Upper Flipper
Switch,
if used
WHT
Connector in cabinet
allocated for Printer
or Ticket Dispenser
Coin Meter
BLK
RED
GRY
1
2
3
1
2
3
BLK
RED
GRY
GND
+5VDC
+12VDC
1K
RED 1
NC 2
BLK 3
02003
1
2
3
RED +5VDC
NC
BRN-BLK
GRY-GRN
GRY-GRN
> From existing 3-Pin
Connector in Game
Cabinet for Meter
Sec. 5: PCBs
NC
NC
KEY
CN6-P7
+5V
Ticket Dispenser
Cable 036-5477-93
1
2
3
4
5
6
7
8
9
1 2 3 4 5
Deltronics DL-1275 Circuit Board
or compatible
Wire colors are typical for
Entropy Ticket Dispensors
1
2
3
4
BLU
BLK
WHT
RED
1
2
3
4
Terminal Strip
500-6640-00
1
2
3
4
GRY-GRN
BLK-WHT
WHT
GRY
Notch Return Signal
Controlled Negative
Drive Signal
+12V DC
Ticket Dispenser
Printed Circuit
Boards (PCBs)
Section 5, Chapter 4
Page 145
To u r n a m e n t S e r i a l I n t e r f a c e B o a r d S c h e m a t i c ( S h e e t 1 o f 1 )
6
5
4
6
5
4
D
C
B
Sec. 5: PCBs
A
Section 5, Chapter 4
Page 146
Printed Circuit
Boards (PCBs)
To u r n a m e n t S e r i a l I n t e r f a c e B o a r d S c h e m a t i c ( S h e e t 1 o f 1 )
3
2
1
D
R42, R44 & R45
NOT STUFFED
C
A
Schematic Set
®
Sheet 1 of 1
SIZE
NOTES:
R ALL RESISTOR VALUES ARE IN OHMS ( W ), 1/4W, 5%, UNLESS OTHERWISE SPECIFIED.
R ALL CAPACITOR VALUES ARE IN MICROFARADS ( mF ), UNLESS OTHERWISE SPECIFIED.
R 0.1 MICROFARADS ( mF ) BYPASS CAPACITOR ON ALL IC’S.
3
Printed Circuit
Boards (PCBs)
2
REV.
A
D
SPI Tournament Serial Interface Bd.
SPI Part Nº: 520-5220-00
Non-Text Document
Prepared By: CES Inc. Edited By: SPI Inc.
Model: 237-0268-00 Dated: 08/2002
1
Section 5, Chapter 4
Page 147
Sec. 5: PCBs
B
To u r n a m e n t S e r i a l I n t e r f a c e B o a r d C o m p o n e n t La y o u t
Cabinet Bottom
Data Cable
®
BETA brite ® Electronic Color Message Display
Power
Supply
®
BETA brite Power Cable
Plugs into Service Outlet
provided in the bottom of all
domestic SPI Pinball Games
10 9 8 7 6 5 4 3 2 1
1 2 3 4 5 6 7 8 9 10
THIS SIDE:
Tournament Large Cable
Wiring Harness (036-5477-98)
Serial Interface to
I/O Power Driver Board
ORG-BRN
ORG-RED
ORG-BLK
KEY
ORG-YEL
ORG-GRN
ORG-BLU
ORG-VIO
ORG-GRY
ORG-WHT
KEY
2 1
+5V
12 11 10 9 8 7 6 5 4 3 2 1
DISPLAY
Moved
from I/O Bd. J2
(if used)
To
Playfield Dot Display
TSI
or LED Sign
J4
(Conn. under P/F)
}
}
}
ELECTRONIC
COLOR MESSAGE
Not Used
this Game
}
ORG-WHT
KEY
ORG-GRY
ORG-VIO
ORG-BLU
ORG-GRN
ORG-YEL
ORG-BLK
ORG-RED
ORG-BRN
1 2 3 4 5 6 7 8 9 10
J6 DATA
CABLE
TO BETA brite®
To
TSI
J1
Connected to
I/O Power
Driver Bd. J2
RED
BLK
To
TSI
J2
}
To From
TSI existing
J5 harness
PNK-WHT
BLU-WHT
GRN-WHT
BRN-WHT
PNK
GRY
VIO
BLU
GRN
YEL
ORG
BRN
1 2 3 4 5 6 7 8 9 10 11 12
}
Connected to
I/O Power
Driver Bd. J3
1 2 3 4 5 6 7 8 9 11 10 12
}
G ND
Sec. 5: PCBs
THIS SIDE:
The 9-Pin Break-Out Conn. on
above harness, for UK Aux.
or Ticket / Coin Dispenser
Application Only
+5V
FROM I/O
J16-P5
RED
BLK
FROM I/O
J16-P11
GND
J7 OPTIONAL SERIAL PORT
FOR PRINTER OR LAPTOP
(call Technical Support for
more information, if required).
Component Side
ITEM
QTY
PART NUMBER
REF-DESIGNATOR
DESCRIPTION
--
1
520-5220-00
Tournament Serial Interface (TSI) Board
PCB Assembly
Section 5, Chapter 4
Page 148
Printed Circuit
Boards (PCBs)
$S SHQGL[
$SSHQGL[HV$WKUR XJK7DE O H R I & R QW H QW V
x$SSHQGL[$
3LQEDOO*DPH)LUPZDUH7DEOH $$
[ [White
WhiteStar
StarBoard
BoardSystem
SystemOnly*
Only*] ] ...describes the ROM / Chip Size / Program & Raw Part Number /
USA Version / Check Sum, and CPU/Snd Bd. I & II ROM locations for Games Apollo 13 — current.
x$SSHQGL[%
6HPL&RQGXFWRUV,&·V5HOD\V&URVV5HIHUHQFH7DEOH %
...describes diodes and transistors with Source Number, SPI Part Number, NTE Number,
ECG Number, Radio Shack Number & RCA Part Number (If applicable).
x$SSHQGL[&
3URGXFWLRQ6WDUW'DWH0DQXDO3DUW1ž5206L]H3RVLWLRQVDQG-XPSHU: &
[ [White
WhiteStar
StarBoard
BoardSystem
SystemOnly*
Only*] ] ...provides the Production Start Date, Manual Part Number, ROM
Position(s), and Jumpers Installed for Games Apollo 13 — current.
x$SSHQGL['
%RDUG7\SH7DEOH''
[ [White
WhiteStar
StarBoard
BoardSystem
SystemOnly*
Only*] ] ...provides the Flipper**, I/O Power Driver, CPU/Sound, Display
Power Supply, Dot Matrix Display, Display Controller, OPTOs and Misc. Board Part Numbers for
Games Apollo 13 — current. **Flipper Bd. with White Star Bd. System for A13 & Golden Eye only.)
x$SSHQGL[(
*HQHULF&RLO&URVV5HIHUHQFH*XLGH)OLSSHU&RLO7DEOH ((
WhiteStar
StarBoard
BoardSystem
SystemOnly*
Only*] ] ...provides the Coils used with Part Number and Gauge-Turns (of the
[ [White
coil) for Games Apollo 13 — current.
x$SSHQGL[)
0RWRU6SHFLILFDWLRQ7DEOH ))
[ [White
WhiteStar
StarBoard
BoardSystem
SystemOnly*
Only*] ] ...provides all the Motor Function, Specifications and Part Number
for Games Apollo 13 — current.
x$SSHQGL[*
3DUW1XPEHU3UHIL[&ODVVLILFDWLRQ&RGHV*
...explains how our Part Numbers are developed to help sort parts easier.
x$SSHQGL[+
3OD\ILHOG,QVHUWV3ODVWLF/LJKW&RYHUV +
...gives a pictoral view with the name and Part Nr. of all the inserts used (with Color Code Chart).
x$SSHQGL[,
6WDQG8S7DUJHWV+DSS0RGXODU5HJXODU ,
...gives a pictoral view with the name and Part Number of all the Single Stand-Up Targets used
(with Color Code Chart).
x$SSHQGL[&RLQ&DUGV86$,QWHUQDWLRQDO -
...gives a pictoral view with the name and Part Number of all the current Coin Cards for USA,
Canada, Euro and other International Countries.
x*ORVVDU\RI7HUPV/DVW3DJH
...gives definitions or explanations of some pinball terms and acronyms.
x/LPLWHG:DUUDQW\&DXWLRQV:DUQLQJV1RWLFHV /DVW3DJH
* Note:
For complete Appendix Information (Appendixes A, C, D, E & F) for Games Laser War through Batman Forever), see any Service
Game Manual between Apollo 13 through Ripley’s Believe It or Not! or on-line at our website www.sternpinball.com/parts.htm;
also available on CD-R, 970-2003-00 (The Simpsons Pinball Party, Terminator® 3 and The Lord of the Rings ).
$SSHQGL[HV$7DEOHRI&RQWHQWV
$SSHQGL[HV$7DEOHRI&RQWHQWV
$33(1',;$
520
* Note:
&KLS
6L]H
3URJUDP
3DUW 1ž
86$ '07 %G
&KHFN 6XP /RF
5DZ
3DUW 1ž
For complete Appendix Information for Games Laser War
through Batman Forever, see any Service Game Manual
between Apollo 13 through Ripley’s Believe It or Not!
or on-line at our website www.sternpinball.com/parts.htm;
also available on CD-R, 970-2003-00 (The Simpsons
Pinball Party, T3® and The Lord of the Rings ).
Apollo 13 (Note 1)
Game ROM
Sound
Display
Voice 1
Voice 2
Voice 3
(1M)
(512K)
(4M)
(4M)
(4M)
(4M)
(1M)
(512K)
(4M)
(4M)
(4M)
(1M)
(512K)
(4M)
(4M)
(4M)
(1M)
(512K)
(4M)
(4M)
(4M)
(1M)
(512K)
(4M)
(4M)
(4M)
(4M)
(1M)
(512K)
(4M)
(4M)
(4M)
(1M)
(512K)
(4M)
(4M)
(4M)
(1M)
(512K)
(4M)
(4M)
(4M)
(1M)
(512K)
(4M)
(4M)
(4M)
(4M)
(1M)
(512K)
(4M)
(4M)
(4M)
(4M)
(4M)
(1M)
(512K)
(4M)
(4M)
(4M)
(4M)
(4M)
(1M)
(512K)
(4M)
(4M)
(4M)
(4M)
(4M)
(1M)
(512K)
(4M)
(8M)
(8M)
(8M)
(8M)
(1M)
(4M)
965-0319-67A
965-0321-67A
A1.08 | $23FF
A1.05 | $B594
U210
ROM 0
960-5009-00
960-5015-01
Game ROM
Display
(1M)
(4M)
965-0319-87
965-0321-87
A3.00 | $22FF
A3.00 | $B596
U210
U5
960-5009-00
960-5015-01
A1.02 | $E4FF
V1.00 | $3BCA
A1.03 | $1957
V1.00 | $482A
V1.00 | $7312
V1.00 | $DE2F
V1.00 | $C508
U210
U7
ROM 0
U17
U21
U36
U37
960-5009-00
960-7001-02
960-5015-01
960-5016-00
960-5016-00
960-5016-00
960-5016-00
: Harley-Davidson® (Notes 4, 5, 6, 8) 2nd Edition (2002-2003)
960-5009-00
960-7001-02
960-5015-01
960-5015-01
960-5015-01
A2.02 | $9CFF
V1.00 | $222B
A2.00 | $ABF7
V1.00 | $3AE1
V1.00 | $206E
U210
U7
ROM 0
U17
U21
960-5009-00
960-7001-02
960-5015-01
960-5015-01
960-5015-01
Sharkey’s Shootout (Notes 4, 5)
A3.00 | $E6FF
V1.00 | $F1E7
A3.00 | $0057
V1.00 | $DBA8
V1.00 | $DDF1
V1.00 | $F32A
U210
U7
ROM 0
U17
U21
U36
960-5009-00
960-7001-02
960-5015-01
960-5015-01
960-5015-01
960-5015-01
High Roller Casino (Notes 4, 5)
965-0224-45
965-0227-45
965-0228-45
965-0225-45
965-0226-45
965-0229-43
965-0233-43
965-0234-43
965-0230-43
965-0231-43
965-0232-43
965-0235-56
965-0238-56
965-0239-56
965-0236-56
965-0237-56
A4.03 | $5EFF
V1.00 | $4A7D
A4.00 | $8817
V1.00 | $E66B
V1.00 | $8F54
U210
U7
ROM 0
U17
U21
960-5009-00
960-7001-02
960-5015-01
960-5015-01
960-5015-01
A2.02 | $C8FF
V1.00 | $A35B
A2.01 | $7F46
V1.00 | $1D27
V1.00 | $8DA4
U210
U7
ROM 0
U17
U21
960-5009-00
960-7001-02
960-5015-01
960-5015-01
960-5015-01
A3.03 | $A2FF
V1.00 | $6648
A3.00 | $66D0
V1.00 | $349D
V1.00 | $629C
U210
U7
ROM 0
U17
U21
960-5009-00
960-7001-02
960-5015-01
960-5015-01
960-5015-01
A2.00 | $85FF
V1.00 | $64B2
A2.00 | $E77B
V1.00 | $152A
V1.00 | $0291
V1.00 | $95A7
U210
U7
ROM 0
U17
U21
U36
960-5009-00
960-7001-02
960-5015-01
960-5015-01
960-5015-01
960-5015-01
A2.01 | $C5FF
V1.00 | $4DF8
A2.01 | $C17D
V1.00 | $8018
V1.00 | $2157
V1.00 | $B5A6
V1.00 | $D01E
U210
U7
ROM 0
U17
U21
U36
U37
960-5009-00
960-7001-02
960-5015-01
960-5015-01
960-5015-01
960-5015-01
960-5015-01
965-0282-60
965-0287-60
965-0288-60
965-0283-60
965-0284-60
965-0285-60
965-0286-60
A1.01 | $B2FF
V1.00 | $A6AF
A1.02 | $32AB
V1.00 | $4391
V1.00 | $8215
V1.00 | $5B32
V1.00 | $8971
U210
U7
ROM 0
U17
U21
U36
U37
960-5009-00
960-7001-02
960-5015-01
960-5015-01
960-5015-01
960-5015-01
960-5015-01
965-0289-40
965-0294-40
965-0295-40
965-0290-40
965-0291-40
965-0292-40
965-0293-40
A2.05| $B1FF
V1.00 | $0CC8
A2.00 | $C929
V1.00 | $0D75
V1.00 | $CCCF
V1.00 | $227F
V1.00 | $DB69
U210
U7
ROM 0
U17
U21
U36
U37
960-5009-00
960-7001-02
960-5015-01
960-5015-01
960-5015-01
960-5015-01
960-5015-01
A1.03 | $58FF
V1.00 | $1286
A1.01 | $166F
V1.00 | $7BF8
V1.00 | $9CCC
V1.00 | $ADD9
V1.00 | $6659
U210
U7
ROM 0
U17
U21
U36
U37
960-5009-00
960-7001-02
960-5015-01
960-5016-00
960-5016-00
960-5016-00
960-5016-00
965-0240-53
965-0243-53
965-0244-53
965-0241-53
965-0242-53
965-0245-46
965-0248-46
965-0249-46
965-0246-46
965-0247-46
965-0250-59
965-0253-59
965-0254-59
965-0251-59
965-0252-59
965-0255-59
965-0266-35
965-0271-35
965-0272-35
965-0267-35
965-0268-35
965-0269-35
965-0270-35
965-0301-71
965-0306-71
965-0307-71
965-0302-71
965-0303-71
965-0304-71
965-0305-71
: Harley-Davidson® (Notes 4, 5, 6, 8) 3rd Edition (2004)
Game ROM
Sound
Display
Voice 1
Voice 2
Voice 3
Voice 4
965-0326-68
965-0327-68
965-0328-68
965-0329-68
965-0330-68
965-0331-68
965-0332-68
NFL (Notes 4, 5) Not on CD-R or Website: Code through Distributor Only.
Game ROM
Sound
Display
Voice 1
Voice 2
Voice 3
Voice 4
Game ROM
Sound
Display
Voice 1
Voice 2
Voice 3
Game ROM
Sound
Display
Voice 1
Voice 2
Voice 3
Voice 4
(1M)
(512K)
(4M)
(8M)
(8M)
(8M)
(8M)
(1M)
(512K)
(4M)
(8M)
(8M)
(8M)
(1M)
(512K)
(4M)
(8M)
(8M)
(8M)
(8M)
Austin Powers
Game ROM
Sound
Display
Voice 1
Voice 2
Voice 3
Voice 4
Game ROM
Sound
Display
Voice 1
Voice 2
Voice 3
(1M)
(512K)
(4M)
(8M)
(8M)
(8M)
(8M)
965-0339-73
965-0340-73
965-0341-73
965-0342-73
965-0343-73
965-0344-73
965-0345-73
965-0333-72
965-0334-72
965-0335-72
965-0336-72
965-0337-72
965-0338-72
965-0346-65
965-0347-65
965-0348-65
965-0349-65
965-0350-65
965-0351-65
965-0352-65
U210
U7
ROM 0
U17
U21
U36
U37
960-5009-00
960-7001-02
960-5015-01
960-5016-00
960-5016-00
960-5016-00
960-5016-00
A2.11 | $49FF
V1.01 | $9796
A2.01 | $6C33
V1.00 | $58EA
V1.00 | $272B
V1.00 | $41AE
U210
U7
ROM 0
U17
U21
U36
960-5009-00
960-7001-02
960-5015-01
960-5016-00
960-5016-00
960-5016-00
A3.00 | $90FF
V1.00 | $581C
A3.00 | $74B3
V1.00 | $E12D
V1.00 | $38F4
V1.00 | $1B54
V1.00 | $D720
U210
U7
ROM 0
U17
U21
U36
U37
960-5009-00
960-7001-02
960-5015-01
960-5016-00
960-5016-00
960-5016-00
960-5016-00
A3.02 | $5DFF
V1.00 | $DA7B
A3.00 | $6A34
V1.00 | $D2B9
V1.00 | $9E75
V1.00 | $51F3
V1.00 | $0AE5
U210
U7
ROM 0
U17
U21
U36
U37
960-5009-00
960-7001-02
960-5015-01
960-5016-00
960-5016-00
960-5016-00
960-5016-00
A3.03 | $5EFF
V1.00 | $8C18
A3.01 | $A381
V1.00 | $35E6
V1.00 | $B35A
V1.00 | $8A9F
U210
U7
ROM 0
U17
U21
U36
960-5009-00
960-7001-02
960-5015-01
960-5016-00
960-5016-00
960-5016-00
A5.00 | $7DFF
V1.02 | $E7C2
A5.00 | $A5FF
V1.00 | $9ABE
V1.00 | $9F34
V1.00 | $374B
V1.00 | $237A
U210
U7
ROM 0
U17
U21
U36
U37
960-5009-00
960-7001-02
960-5015-01
960-5016-00
960-5016-00
960-5016-00
960-5016-00
U7
U210
U17
U21
U36
U5 Disp. Cntrlr.
960-7001-02
960-5009-00
960-5016-00
960-5016-00
960-5016-00
960-5015-01
U7
U210
U17
U21
U36
U37
U5 Disp. Cntrlr.
960-7001-02
960-5009-00
960-5016-00
960-5016-00
960-5016-00
960-5016-00
960-5015-01
A1.00 | $D2FF
V1.00 | $
A1.01 | $845A
V1.00 | $
V1.00 | $
V1.00 | $
V1.00 | $
(Notes 4, 5)
965-0353-74
965-0354-74
965-0035-74
965-0356-74
965-0357-74
965-0358-74
965-0359-74
(1M)
(512K)
(4M)
(8M)
(8M)
(8M)
965-0360-75
965-0361-75
965-0362-75
965-0363-75
965-0364-75
965-0365-75
Playboy (Notes 4, 5, 7)
Game ROM
Sound
Display
Voice 1
Voice 2
Voice 3
Voice 4
(1M)
(512K)
(4M)
(8M)
(8M)
(8M)
(8M)
965-0367-76
965-0368-76
965-0369-76
965-0370-76
965-0371-76
965-0372-76
965-0373-76
RollerCoaster Tycoon
Sound
Game ROM
Voice 1
Voice 2
Voice 3
Display
(512K)
(1M)
(8M)
(8M)
(8M)
(4M)
(Notes 4, 5, 7)
965-0374-78
965-0375-78
965-0377-78
965-0378-78
965-0379-78
965-0376-78
V1.00 | $F663
A7.01| $40FF
V1.00 | $3C4A
V1.00 | $057A
V1.00 | $04D7
A7.00 | $8E23
The Simpsons Pinball Party (Notes 4, 5, 7)
Sound
Game ROM
Voice 1
Voice 2
Voice 3
Voice 4
Display
(512K)
(1M)
(8M)
(8M)
(8M)
(8M)
(4M)
965-0381-77
965-0382-77
965-0383-77
965-0384-77
965-0385-77
965-0386-77
965-0387-77
V1.01 | $A7EE
A4.00 | $4FFF
V1.00 | $9719
V1.00 | $16ED
V1.00 | $ADCE
V1.00 | $E7E5
A4.00 | $8A03
Terminator® 3: Rise of the Machines
Sound
Game ROM
Voice 1
Voice 2
Voice 3
Voice 4
Display
(512K)
(1M)
(8M)
(8M)
(8M)
(8M)
(4M)
965-0388-79
965-0389-79
965-0390-79
965-0391-79
965-0392-79
965-0393-79
965-0394-79
The Lord of the Rings
Sound
Game ROM
Voice 1
Voice 2
Voice 3
Voice 4
Display
footnotes:
$SSHQGL[$
(1M)
(512K)
(4M)
(8M)
(8M)
(8M)
(8M)
Monopoly® (Notes 4, 5)
South Park (Notes 4, 5)
Game ROM
Sound
Display
Voice 1
Voice 2
Voice 3
Voice 4
Game ROM
Display
U210
U7
ROM 0
U17
U21
Godzilla (Note 4)
Game ROM
Sound
Display
Voice 1
Voice 2
Voice 3
Voice 4
960-5009-00
960-7001-02
960-5015-01
960-5016-00
960-5016-00
960-5016-00
960-5015-01
A4.05 | $E9FF
V1.00 | $1FFF
A4.00 | $FD01
V1.00 | $3650
V1.00 | $9300
Lost In Space (Note 4)
Game ROM
Sound
Display
Voice 1
Voice 2
Voice 3
Voice 4
U210
U7
ROM 0
U17
U21
U36
U37
965-0219-41
965-0221-41
965-0222-41
965-0220-41
965-0223-41
Viper Night Drivin’ (Note 4)
Game ROM
Sound
Display
Voice 1
Voice 2
Voice 3
Voice 4
A1.03 | $3EFF
V1.00 | $F4FF
A1.04 | $FC7C
V1.00 | $CD26
V1.00 | $9396
V1.00 | $FB72
V1.00 | $6100
Striker Xtreme (Notes 4, 5)
Starship Troopers (Note 3)
Game ROM
Sound
Display
Voice 1
Voice 2
Voice 3
965-0319-67
965-0320-67
965-0321-67
965-0322-67
965-0323-67
965-0324-67
965-0325-67
960-5009-00
960-7001-02
960-5015-01
n/a (masked)
n/a (masked)
The X-Files (Note 2)
Game ROM
Sound
Display
Voice 1
Voice 2
(1M)
(512K)
(4M)
(8M)
(8M)
(8M)
(4M)
U210
U7
ROM 0
U17
U21
The Lost World: Jurassic Park (Note 2)
Game ROM
Sound
Display
Voice 1
Voice 2
Game ROM
Sound
Display
Voice 1
Voice 2
Voice 3
Voice 4
Harley-Davidson® (Notes 4, 5, 6) Original (1999-2001)
A4.04 | $3FFF
V1.00 | $D615
A4.00 | $E6ED
V1.00 | $3E32
V1.00 | $71F0
The Star Wars Trilogy - Special Edition (S.E.) (Note 2)
Game ROM
Sound
Display
Voice 1
Voice 2
5DZ
3DUW 1ž
965-0214-42
965-0217-42
965-0218-42
965-0215-42
965-0216-42
Space Jam (Note 2)
Game ROM
Sound
Display
Voice 1
Voice 2
Voice 3
86$ '07 %G
&KHFN 6XP /RF
960-5009-00
960-7001-02
960-5015-01
n/a (masked)
n/a (masked)
n/a (masked)
ID4: Independence Day (Note 2)
Game ROM
Sound
Display
Voice 1
Voice 2
3URJUDP
3DUW 1ž
U210
U7
ROM 0
U17
U21
U36
Twister (Note 2)
Game ROM
Sound
Display
Voice 1
Voice 2
&KLS
6L]H
A5.01 | $09FF
V1.00 | $5244
A5.00 | $B92B
V1.00 | $7FC7
V1.00 | $8E55
V1.00 | $08EE
965-0208-00
965-0212-00
965-0213-00
965-0209-00
965-0210-00
965-0211-00
Golden Eye (Note 1)
Game ROM
Sound
Display
Voice 1
Voice 2
520
(512K)
(1M)
(8M)
(8M)
(8M)
(8M)
(4M)
(Notes 4, 5, 7)
V1.00 | $D2FD
A4.00 | $F8FF
V1.00 | $1838
V1.00 | $F0D5
V1.00 | $89DA
V1.00 | $1200
A4.00 | $6E49
U7
U210
U17
U21
U36
U37
U5 Disp. Cntrlr.
960-7001-02
960-5009-00
960-5016-00
960-5016-00
960-5016-00
960-5016-00
960-5015-01
U7
U210
U17
U21
U36
U37
U5 Disp. Cntrlr.
960-7001-02
960-5009-00
960-5016-00
960-5016-00
960-5016-00
960-5016-00
960-5015-01
(Notes 7, 8)
965-0401-80
965-0402-80
965-0403-80
965-0404-80
965-0405-80
965-0406-80
965-0407-80
V1.01 | $36BC
A8.00 | $94FF
V1.00 | $1792
V1.00 | $67F1
V1.00 | $89B6
V1.00 | $EA49
A8.00 | $3C88
1 — 8 see the bottom of the next page (A2).
3LQEDOO*DPH
)LUPZDUH7DEOH
Sound & Voice 1-4
identical to above
H-D® Original.
3LQEDOO*DPH)LUPZDUH:KLWH6WDU%RDUG6\VWHP2QO\*7DEOH
$33(1',;$
3LQEDOO*DPH)LUPZDUH:KLWH6WDU%RDUG6\VWHP2QO\*7DEOH
520
&KLS
6L]H
3URJUDP
3DUW 1ž
86$ '07 %G
&KHFN 6XP /RF
5DZ
3DUW 1ž
Sound
Game ROM
Voice 1
Voice 2
Voice 3
Voice 4
Display
(512K)
(1M)
(8M)
(8M)
(8M)
(8M)
(4M)
965-0408-81
965-0409-81
965-0410-81
965-0411-81
965-0412-81
965-0413-81
965-0414-81
V1.00 | $D93D
A3.10 | $F4FF
V1.00 | $067B
V1.00 | $C8B8
V1.00 | $64C2
V1.00 | $5341
A3.00 | $DE4B
U7
U210
U17
U21
U36
U37
U5 Disp. Cntrlr.
960-7001-02
960-5009-00
960-5016-00
960-5016-00
960-5016-00
960-5016-00
960-5015-01
965-0415-84
965-0416-84
965-0417-84
965-0418-84
965-0419-84
965-0420-84
965-0421-84
V1.00 | $8CD2
A4.00 | $90FF
V1.00 | $538D
V1.00 | $8BCD
V1.00 | $60F8
V1.00 | $14D8
A4.01 | $0502
U7
U210
U17
U21
U36
U37
U5 Disp. Cntrlr.
960-7001-02
960-5009-00
960-5016-00
960-5016-00
960-5016-00
960-5016-00
960-5015-01
Ripley’s Believe It or Not!® (Notes 7, 8)
520
&KLS
6L]H
3URJUDP
3DUW 1ž
86$ '07 %G
&KHFN 6XP /RF
5DZ
3DUW 1ž
Elvis® (Notes 7, 8)
Sound
Game ROM
Voice 1
Voice 2
Voice 3
Voice 4
Display
(512K)
(1M)
(8M)
(8M)
(8M)
(8M)
(4M)
footnotes:
1 ROMs on CPU/Sound Bd.: 520-5136-00 (Stereo) & Display Cont. Bd.: 520-5055-01
2 ROMs on CPU/Sound Bd.: 520-5136-10 (Mono) & Display Cont. Bd.: 520-5055-01
3 ROMs on CPU/Sound Board: 520-5136-15* (Mono) (*FCC 11-97) &
Display Controller Board: 520-5055-02* (*FCC 11-97)
4 ROMs on CPU/Sound Bd.: 520-5136-16† (Mono) (†FCC 02-98) &
Display Controller Board: 520-5055-03‡ (‡FCC 02-98)
5 This game uses 8MB VOICE ROMS at U17, U21, U36 & U37 (if 3 ROMs use U37 will
be unused) requiring a Jumper at Loc. W6. Refer to CPU/Snd. Bd. Schematic (2 of 3).
6 Harley-Davidson® 2nd Edition: For Game ROM, Sound & Display info (version,
check sums, part numbers) call Tech Support or check our website (see back cover)
for current versions or other info. Raw Part numbers are identical to the H-D® original.
7 ToPS (Tournament Pinball System) READY!
8 ROMs on CPU/Sound Board II (with ATMEL Processor):
520-5300-00 & Display Cont. Bd.: 520-5055-03‡ (‡FCC 02-98)
Game Revisions can be updated after the Production Run.
This Table is accurate as of the printing of this manual. If any
changes occurred, the next game manual will include the updated
information. The version stated is USA. If there is a question of
as to the latest Code Revision & Check Sum call our Technical
Support Dept., 1-800-542-5377 or 1-708-345-7700 (Select Opt. 1).
Visit our website www.SternPinball.com where the latest code
can be downloaded (an EPROM Burner is required).
Code also available on
CD-R Disc 2
3LQEDOO*DPH
)LUPZDUH7DEOH
$SSHQGL[$
$33(1',;%
6HPL&RQGXFWRUV,QWHJUDWHG&LUFXLWV,&5HOD\V&URVV5HIHUHQFH7DEOH
7DEOH
1ž
6RXUFH
67(51•
5DGLR
( & *Š
5 & $Š
1 7 (Š
1XPEHU
3,1%$//
6KDFNŠ
5(&7,),&$7,21 %/2&.,1* '$03(1,1* ',2'(6 $1'25 /,*+7 (0,77,1* ',2'(6 /('V
7\SH
Diode
Diode
Diode
Diode
Diode
Diode
Diode, Signal
LED
1N4001
1N4004
1N5401
1N5404
T6A10L
FR302
1N914
MT5000UR or
TLRH180P
(T1-3/4 GaAIAs)
112-5001-00
112-5003-00
112-0056-00
112-5004-00
112-5006-01
112-5009-00
112-5014-00
165-5052-00
NTE552
NTE116
NTE5801
NTE5804
NTE5812
NTE588
-—-—-
ECG552
ECG116
ECG5801
ECG5804
ECG5812
ECG588
-—-—-
-—-—276-1103
276-1143
276-1144
-—-—-—-—-—-—-
SK9000
SK3312
SK9004
SK9007
-—-—SK5014
-—-—-
(old SPI Part N:
165-5100-00)
-—-—-
-—-—-
276-066B
-—-—-
1N4742A 12v
1N4760B 68v
1N4764A 100v
1N5228 3.9v
1N5234B 6.2v
1N5379 110v
1N6267A 6.8v
1N4752A 33v
1N4736 6.8v 1w
112-0061-00
112-0062-00B
112-0049-00A
112-0053-00
112-0047-00B
112-0072-00
112-5011-00
112-5010-00A
112-5007-00
NTE142A
NTE5092A
NTE5096A
NTE5007A
NTE5013A
NTE5157
NTE4902
NTE147A
NTE5071A
ECG142A
ECG5092A
ECG5096A
ECG5007A
ECG5013A
ECG5157
ECG4902
ECG147A
ECG5071A
276-563
-—-—-—-—-—-—276-561
-—-—-—-—-—-—-—-—-
SK12V
SK68V
SK100V
SK3A9
SK6A2
SK110X
-—-—SK33V
-—-—-
ECG2987
ECG2985
-—-—ECG85
ECG48
ECG157
ECG287
ECG123AP
ECG261
ECG375
ECG288
ECG292
ECG374
ECG278
ECG332
ECG292
ECG393
ECG5400
ECG5461-8
-—-—-—-—-—-—276-2009
-—-—-—-—-—-—276-2009
276-2068
-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—276-1067
-—-—-
-—-—-—-—-—-—SK3124A
SK4906
SK3747
SK3232
-—-—SK3896
SK9118
SK3434
SK3441
SK9042
SK3434
SK9236
SK3441
SK3961
SK3950
-—-—-
=(1(5 ',2'(6
Diode
Diode
Diode
Diode
Diode
Diode
Diode
Diode
Diode
75$16,67256 7<3( )(7 131 313 $1'25 6&5
FET Trans.
FET Trans.
FET Trans.
NPN Trans.
NPN Trans.
NPN Trans.
NPN Trans.
NPN Trans.
NPN Trans.
NPN Trans.
PNP Trans.
PNP Trans.
PNP Trans.
PNP Trans.
PNP Trans.
PNP Trans.
PNP Trans.
SCR Trans.
SCR Trans.
STP20N10L
STP19N06L
VN02N
2N4401
2N6427
MJE340
MPSA42
2N3904
TIP122
MJE15030
2N5401
MJE15031
MJE350
MPSA92
TIP42
TIP32C
TIP36C
2N5060
SCR2800B
110-0106-00
110-0088-00
110-0089-00
110-0073-00
110-0070-00
110-0071-00
110-0082-00
110-0069-00
110-0067-00
110-0101-00
110-0078-00
110-0103-00
110-0072-00
110-0100-00
110-0068-00
110-0081-00
110-0077-00
110-0074-00
110-0083-00
%5,'*( 5(&7,),(56 %5
BR (Present)
DB3501 or
CM3501
&RPPHQWV
112-5000-00
For White Star I/O Bds., BR = 35 Amp @ 100v P.I.V.
190-5002-00
For PPB, Power Supply, & White Star I/O Boards,
Relay = 24v DC 10 Amp DPDT
For CPU Boards,
Relay = 6v DC 5 Amp 4 Pole DT
5(/$<6
Relay
Relay
$SSHQGL[%
NTE2987
NTE2985
-—-—NTE85
NTE48
NTE157
NTE287
NTE123AP
NTE261
NTE375
NTE288
NTE292
NTE374
NTE288
NTE332
NTE292
NTE393
NTE5400
NTE5461-8
&RPPHQWV
FRL-264
D024/02CK
FRL-264
D006/04CV
190-5001-00
6HPL&RQGXFWRUV
&URVV5HI7DEOH
$33(1',;&
3URGXFWLRQ6WDUW'DWH0DQXDO3DUW1ž5206L]H3RVLWLRQVDQG
-XPSHU:,QVWDOOHG1RWH‡:KLWH6WDU%RDUG6\VWHP2QO\*
*DPH? 1DPH 3URGXFWLRQ
* Note:
-XPSHU
,QVWDOOHG
‡ VHH 1RWH
CPU/Sound Board Sound U7 512K
CPU/Sound Board Game U210 1MB
CPU/Sound Board Voice ROMS:
•
U17
U21
U36
U37
For complete Appendix Information for Games Laser War
through Batman Forever, see any Service Game Manual
between Apollo 13 through Ripley’s Believe It or Not!
or on-line at our website www.sternpinball.com/parts.htm;
also available on CD-R, 970-2003-00 (The Simpsons
Pinball Party, T3® and The Lord of the Rings ).
:KLWH6\VWHP
6WDU
%RDUG
6WDUW 'DWH
DQG
0DQXDO 31ž
13
29 Apollo
(A13)
30 Golden
Eye
31 Twister
NOV 95
780-5044-00
FEB 96
780-5042-00
APR 96
780-5041-00
ID4:
IndependJUL 96
32
ence Day
780-5045-00
OCT 96
33 Space
Jam
780-5043-00
The
Star
Wars
97
34 Trilogy - Sp. Ed. FEB
780-5056-00
35 The Lost World: JUN 97
Jurassic Park
780-5053-00
The
AUG
97
36
X-Files
780-5046-00
NOV 97
37 Starship
Troopers
780-5059-00
Night
FEB 98
38 Viper
Drivin’
780-5035-00
Lost
In
JUN 98
39
780-5060-00
Space
SEP 98
40 Godzilla
780-5040-00
South
JAN 99
41 Park
780-5071-00
42 HarleyAUG 99
a Davidson®
780-5067-01
42 Harley-DavidSEP 02
b son®2nd Ed.
780-5067-10
42 Harley-DavidOCT 04
c son® 3rd Ed.
780-5087-00
43 Striker
MAR 00
a Xtreme
780-5068-01
43 NFL
OCT 00
b
780-5073-00
JUL/OCT 00
44 Sharkey’s
Shootout
780-5072-01
High
Roller
JAN 01
45
Casino
780-5065-00
MAY 01
46 Austin
780-5074-00
Powers•
SEP 01
47 MONOPOLY® 780-5075-00
FEB 02
48 Playboy
780-5076-00
AUG 02
49 RollerCoaster
780-5078-00
Tycoon•
• JAN 03
The
Simpsons
50 Pinball Party
780-5077-00
MAY 03
Rise of
51 T3®:
the Machines• 780-5079-00
4MB
4MB
4MB
4MB
4MB
4MB
4MB
4MB
Not
Used
Not
Used
Not
Used
4MB
4MB
4MB
4MB
4MB
4MB
4MB
4MB
4MB
Not
Used
Not
Used
Not
Used
4MB
4MB
4MB
Not
Used
Not
Used
Not
Used
Not
Used
Not
Used
Not
Used
Not
Used
Not
Used
Not
Used
4MB
4MB
4MB
4MB
n/a
4MB
4MB
4MB
4MB
n/a
4MB
4MB
4MB
4MB
n/a
8MB
8MB
8MB
8MB
W6
8MB
8MB
8MB
8MB
W6
8MB
8MB
8MB
8MB
W6
8MB
8MB
8MB
8MB
W6
8MB
8MB
8MB
8MB
W6
8MB
8MB
8MB
8MB
W6
W6
4MB
*DPH? 1DPH
:KLWH6\VWHP
6WDU
%RDUG
•
of
52 The Lord •
the Rings
Believe It or
53 Ripley’s
Not!®
54 Elvis®
3URGXFWLRQ
6WDUW 'DWH
DQG
0DQXDO 31ž
NOV 03
780-5080-00
APR 04
780-5081-00
AUG 04
780-5084-00
CPU/Sound Board Sound U7 512K
CPU/Sound Board Game U210 1MB
CPU/Sound Board Voice ROMS:
U17
U21
U36
U37
8MB
8MB
8MB
8MB
8MB
8MB
8MB
8MB
8MB
8MB
8MB
8MB
n/a
n/a
See Apdx. A for more detailed information on Pinball Game Firmware (ROM
Name, Size, Part Numbers, USA Version & Checksum and Board Locations).
n/a
n/a
n/a
n/a
n/a
n/a
n/a
8MB
8MB
8MB
Not
Used
8MB
8MB
8MB
8MB
W6
8MB
8MB
8MB
8MB
W6
W6
8MB
8MB
8MB
Not
Used
8MB
8MB
8MB
8MB
W6
W6
8MB
8MB
8MB
Not
Used
8MB
8MB
8MB
8MB
W6
8MB
8MB
8MB
8MB
W6
‡ Additional Information for Installed Jumper (above games 41-51):
x Installed W6 so 8MB ROMS can be utilized. See the CPU/Sound Board
Schematic (Sheet 2 of 3, Address Location 3E) in the games’ Service Game
Manual. Game 52 - current has a new CPU/Sound Board (see Pages 131-141).
See Apdx. A for more detailed information on Pinball Game Firmware (ROM
Name, Size, Part Numbers, USA Version & Checksum and Board Locations).
3URGXFWLRQ6WDUW
,QVWDOOHG1RWH
$SSHQGL[&
$33(1',;'
RDUG7\SH:KLWH6WDURDUG6\VWHP2QO\*7DEOH
*DPH
1DPH
)OLSSHU
,2 3RZHU &386RXQG 'LVS 3RZHU 'RW 0DWUL[
'ULYHU
6WHUHR
6XSSO\
'LVSOD\
'LVSOD\
2372
&RQWUROOHU 7UDQVPLWWHU
2372
5HFHLYHU
2372
$SOOLFDWLRQ
* Note: For complete Appendix Info. for Games Laser War through Batman Forever, see any Service Game Manual between Apollo 13 through Ripley’s BION!
or on-line at our website www.sternpinball.com/parts.htm; also available on CD-R, 970-2003-00 (The Simpsons•Pinball Party, T3® and The Lord of the Rings• ).
520-5080-00
520-5052-00
520-5124-00
520-5125-00 5-Ball Trough
520-5137-00
520-5136-00
520-5138-00
520-5055-01
2-Flipper
128 X 32
Single OPTO Single OPTO over Up-Kicker
Apollo 13
Light Boards 520-5130-01, -04 & -05 Magnet Interface, 7Miscellaneous Segment Display & Light Bd. 520-5130-06 Magnet Driver Board Relay Board
PC Boards:
520-5010-00
520-5130-02 Switch Membrane Board 520-5130-03
520-5080-00
520-5052-00
520-5124-00
520-5125-00 5-Ball Trough
520-5137-00
520-5136-00
520-5138-00
520-5055-01
2-Flipper
128 X 32
Single OPTO Single OPTO over Up-Kicker
Golden Eye
Light Boards
Mag. Processor X2 Driver Bd.
Relay Board
Miscellaneous
PC Boards:
520-5128-05 through -08
520-5143-00
520-5010-00
GAMES HEREON NO LONGER REQUIRE THE FLIPPER BOARD WITH THE WHITE STAR BOARD SYSTEM•
*DPH
1DPH
Twister
,2 3RZHU &386RXQG 'LVS 3RZHU 'RW 0DWUL[
'ULYHU
0RQR
6XSSO\
'LVSOD\
'LVSOD\
2372
&RQWUROOHU 7UDQVPLWWHU
520-5137-01
520-5055-01
Miscellaneous
PC Boards:
520-5136-10
Light Boards
520-5145-01 through -07
520-5137-01
Independence
Day (ID4)
Miscellaneous
PC Boards:
520-5136-10
520-5137-01
520-5136-10
Space Jam
The Star
Wars Trilolgy
- Special Ed.
The Lost
World: J.P.
Miscellaneous
PC Boards:
Starship
Troopers
Viper Night
Drivin’
Lost In Space
Godzilla
HarleyDavidson®
1st-3rd*
Editions
Striker
Xtreme
(NFL)
Sharkey’s
Shootout
520-5138-00
520-5052-00
128 X 32
Mag. Drv. Bd.
520-5143-00
520-5052-00
128 X 32
Servo Mtr. Bd.
520-5152-00
520-5052-00
128 X 32
520-5136-10
Relay Board
520-5010-00
520-5137-01
520-5136-10
520-5055-01
520-5055-01
520-5124-00
520-5125-00
Single OPTO Single OPTO
520-5083-00
520-5082-00
Long Hop OPTO Long Hop OPTO
520-5124-00
520-5125-00
Single OPTO Single OPTO
Miscellaneous
PC Boards:
4-Ball Trough
over Up-Kicker
Alien Head
Enter
5-Ball Trough
over Up-Kicker
520-5052-00
128 X 32
520-5055-01
520-5124-00
Single OPTO
520-5125-00
Single OPTO
4-Ball Trough
over Up-Kicker
520-5138-00
520-5052-00
128 X 32
520-5055-01
520-5124-00
Single OPTO
520-5125-00
Single OPTO
4-Ball Trough
over Up-Kicker
520-5136-10
520-5138-00
520-5052-00
128 X 32
520-5055-01
520-5136-15
520-5138-00
520-5052-00
128 X 32
520-5055-02
520-5138-00
520-5052-00
128 X 32
520-5055-03
520-5138-00
520-5052-00
128 X 32
520-5055-03
520-5138-00
520-5052-00
128 X 32
520-5055-03
520-5138-00
520-5052-00
128 X 32
520-5055-03
Miscellaneous
PC Boards:
520-5137-01
5-Ball Trough
over Up-Kicker
520-5138-00
MiscellaneousP DC Relay Bd. Shaker Mtr. Bd.
C Boards:
520-5066-00
520-5065-00
4X 7-Segment Display Board
520-5166-00
520-5137-01
520-5136-16
Miscellaneous
PC Boards:
Relay Board
520-5010-00
520-5137-01
520-5136-16
Miscellaneous
PC Boards:
Relay Board
520-5010-00
520-5137-01
520-5136-16
520-5162-00
2-Pos. Motor
Sensor on
Snagger Motor
4-Ball Trough
520-5155-00
over Up-Kicker 3-Pos. Motor
Sensor on
File Cabinet
File Cab. Motor
Enter
4-Ball Trough
over Up-Kicker
L/R Orbit
Lane Enter
4-Ball Trough
over Up-Kicker
520-5124-00
520-5125-00
Single OPTO Single OPTO
520-5082-00
520-5083-00
Long Hop OPTO Long Hop OPTO
520-5124-00
520-5125-00
Single OPTO Single OPTO
520-5083-01
520-5082-00
Long Hop OPTO Long Hop OPTO
520-5124-00
520-5125-00
Single OPTO Single OPTO
520-5083-01
520-5082-00
Jump Ramp
Long Hop OPTO Long Hop OPTO
515-0173-00
515-0174-00 4-Ball Trough
Dual OPTO
Dual OPTO over Up-Kicker
515-0173-00
Dual OPTO
515-0174-00
Dual OPTO
4-Ball Trough
over Up-Kicker
Miscellaneous Shaker Mtr. Bd.
PC Boards:
520-5065-00
520-5136-16
Miscellaneous
PC Boards:
520-5052-00
520-5136-16
128 X 32
*520-5300-00* 520-5138-00
Relay Board Shaker Mtr. Bd. Diode Board
520-5010-00
520-5065-00
520-5146-00
520-5052-00
520-5137-01
520-5136-16
520-5138-00
128 X 32
Diode Board
Miscellaneous DC Relay Bd. Relay Board
PC Boards:
520-5066-00
520-5010-00
520-5146-00
520-5052-00
520-5137-64
520-5136-64
520-5138-00
128 X 32
Sol. Exp. Bd.
MiscellaneousP Relay Board
C Boards:
520-5010-00
520-5192-00
520-5052-00
520-5137-01
520-5136-16
520-5138-00
128 X 32
for UK ONLY> Solenoid Expander Bd.
520-5192-00
Miscellaneous Dot Display (5X7) in Slot Mach.
PC Boards:
520-5197-00
for UK ONLY> Solenoid Expander Bd.
520-5192-00
520-5137-01
520-5055-03
Miscellaneous
PC Boards:
520-5137-01
520-5136-16
520-5138-00
520-5052-00
128 X 32
520-5055-03
520-5055-03
520-5055-03
520-5136-16
MiscellaneousP DC Relay Bd.
C Boards:
520-5066-00
520-5055-03
for UK ONLY> Solenoid Expander Bd.
520-5192-00
MiscellaneousP Relay Bd. (X3)
C Boards:
520-5010-00
520-5137-01
Monopoly®
520-5125-00
Single OPTO
Relay Board
520-5010-00
High Roller
Casino
Austin
Powers•
520-5124-00
Single OPTO
2372
0LVF 2372
$SOOLFDWLRQ
$SS
2X 7-Segment Display Board
520-5153-00
520-5137-01
520-5137-01
South Park
520-5138-00
Light Boards
520-5149-01 through -10
Miscellaneous
PC Boards:
520-5137-01
The X-Files
520-5138-00
2372
5HFHLYHU
520-5052-00
128 X 32
Mini-Dot Display (3 by 5X7)
520-5197-00 (Electric C° Sign)
520-5138-00
520-5055-03
for UK ONLY> Solenoid Expander Bd.
520-5192-00
515-0173-00
515-0174-00
Dual OPTO
Dual OPTO
520-5082-00
520-5083-01
Long Hop OPTO Long Hop OPTO
515-0173-00
515-0174-00
Dual OPTO
Dual OPTO
520-5082-00
520-5083-01
Long Hop OPTO Long Hop OPTO
515-0173-00
515-0174-00
Dual OPTO
Dual OPTO
520-5082-00
520-5083-01
Long Hop OPTO Long Hop OPTO
515-0173-00
515-0174-00
Dual OPTO
Dual OPTO
5-Ball Trough
over Up-Kicker
Kenny Under
Trough Enter
4-Ball Trough
over Up-Kicker
Motorcycle
Enter
4-Ball Trough
over Up-Kicker
Goalie UnderTrough Enter
4-Ball Trough
over Up-Kicker
515-0173-00
Dual OPTO
520-5082-00
Long Hop OPTO
520-5196-00
3-Pos. OPTO
515-0173-00
Dual OPTO
520-5082-00
Long Hop OPTO
515-0173-00
Dual OPTO
520-5218-00
4-Pos. OPTO
4-Ball Trough
over Up-Kicker
Ball Lock
under Roulette
Up/Dn Ramp
in Slot Mach.
4-Ball Trough
over Up-Kicker
Time Machine
Ramp
4-Ball Trough
over Up-Kicker
Bank
Door
515-0174-00
Dual OPTO
520-5083-01
Long Hop OPTO
520-5195-00
3-Pos. OPTO
515-0174-00
Dual OPTO
520-5083-01
Long Hop OPTO
515-0174-00
Dual OPTO
520-5210-00
4-Pos. OPTO
520-5155-00
3-Pos. Motor
Sensor on
Goalie Motor
520-5194-00
4-Pos. Motor
Sensor on
?-Ball Motor
520-5194-00
4-Pos. Motor
Sensor on
Roulette
Wheel
Motor
520-5212-00
Pulse-Stretcher
OPTO on Spini-Me
Table continued on the next page.
$SSHQGL['
RDUG
7\SH7DEOH
$33(1',;'
RDUG7\SH:KLWH6WDURDUG6\VWHP2QO\*7DEOH
*DPH
1DPH
,2 3RZHU &386RXQG 'LVS 3RZHU 'RW 0DWUL[
ROG QHZ
'ULYHU
6XSSO\
'LVSOD\
520-5137-01
Playboy
RollerCoaster
Tycoon•
The
Simpsons•
Pinball
Party
Terminator®
3:
Rise of the
Machines•
The Lord
of the
Rings•
Ripley’s
Believe It
or Not!®
Miscellaneous
PC Boards:
DC Relay Bd.
520-5066-00
520-5137-01
520-5136-16
Miscellaneous
PC Boards:
DC Relay Bd.
520-5066-00
520-5137-01
520-5136-16
Miscellaneous
PC Boards:
LED Bd.
520-5219-00
520-5137-01
520-5136-16
520-5138-00
520-5052-00
128 X 32
Relay Bd.
520-5010-00
520-5052-00
128 X 32
Mini-Dot Display (3 by 5X7)
520-5221-00 (Ramp Enter Sign)
520-5052-00
520-5138-00
128 X 32
Color Dot Display (4 by 5X7)
520-5225-00 (TV Set)
520-5052-00
520-5138-00
128 X 32
520-5138-00
Miscellaneous
PC Boards:
New
520-5300-00
19-LED PCB
520-5242-00
520-5137-01
520-5300-00
520-5137-01
Miscellaneous 520-5236-00
PC Boards:
X3 Dot Display
Miscellaneous
PC Boards:
RDUG
7\SH7DEOH
520-5055-03
520-5300-00
520-5052-00
128 X 32
OPTO Transmitter / Receiver
Amplifier PCB 520-5239-00
520-5052-00
520-5138-00
128 X 32
OPTO Transmitter / Receiver
Amplifier PCB 520-5239-01
520-5052-00
520-5138-00
128 X 32
520-5138-00
515-0173-00
Dual OPTO
2372
5HFHLYHU
515-0174-00
Dual OPTO
2372
0LVF 2372
$SOOLFDWLRQ
$SS
4-Ball Trough
over Up-Kicker
for UK ONLY> Solenoid Expander Bd.
520-5192-00
520-5055-03
for UK ONLY> Solenoid Expander Bd.
520-5192-00
520-5055-03
999
515-0173-00
515-0174-00
Dual OPTO
Dual OPTO
520-5082-00
520-5083-01
Long Hop OPTO Long Hop OPTO
515-0173-00
515-0174-00
Dual OPTO
Dual OPTO
4-Ball Trough 520-5222-00
over Up-Kicker
1-Position
Behind 1-Bank Switch Detect
Drop Target on Wheel Spin
4-Ball Trough
over Up-Kicker
for UK ONLY
Aux. Driver Bd.
520-5068-01
520-5055-03
999
for UK ONLY
Aux. Driver Bd.
520-5068-01
Miscellaneous
PC Boards:
520-5137-01
Elvis®
520-5136-16
'LVSOD\
2372
&RQWUROOHU 7UDQVPLWWHU
520-5055-03
999
for UK ONLY
Aux. Driver Bd.
520-5068-01
520-5055-03
999
for UK ONLY
Aux. Driver Bd.
520-5068-01
520-5055-03
999
515-0173-00
Dual OPTO
515-7307-00
Single OPTO
515-0173-00
Dual OPTO
515-7307-00
Single OPTO
515-0173-00
Dual OPTO
520-5234-00
3-Pos. OPTO
515-0173-00
Dual OPTO
515-0174-00
Dual OPTO
515-7308-00
Single OPTO
515-0174-00
Dual OPTO
515-7308-00
Single OPTO
515-0174-00
Dual OPTO
520-5234-00
3-Pos. OPTO
515-0174-00
Dual OPTO
4-Ball Trough
over Up-Kicker
TXCannon
Trough
4-Ball Trough 500-6746-00
over Up-Kicker (White Trans.)
Orthanc Tower 500-6747-00
(Black Rec.)
Trough
4-Ball Trough 500-6775-00
over Up-Kicker OPTO Trnscvr
520-5235-03
Vari-Target
X3 Aux. Drvr
4-Ball Trough
over Up-Kicker
for UK ONLY
Aux. Driver Bd.
520-5068-01
$SSHQGL['
$33(1',;(
*HQHULF&RLO&URVV5HIHUHQFH*XLGH
*$78516 5HV : 63, 3$57 1ž
&200(176
*$78516 5HV : 63, 3$57 1ž
&200(176
67$1'$5' &2,/6 7<3,&$/ $33/,&$/7,216
/$5*( &2,/6 )/,33(56 63(&,$/ $33/,&$7,216
090-5020-01 Diodes Top X2 1N4004 + 1N5404
20-4000 1.0 : 090-5021-00 Diode Top
(3-Lug) <BROWN>
:
21-9000
22-5000 1.7 : 090-5017-00 Diode (Top)
090-5020-10 Diode (Top), <RED>
-0B
Diode
Bottom,
-0T
Diode
Top
22-6000 2.2 : 090-5023- use
22-750/ 2.6 : 090-5011-00 DUAL-WOUND COIL, Diode Top X2
1N4004 (3-Lug), <>
23-7000 3.1 : 090-5022- use -00 Diode Bottom, -0T Diode Top
30-2600 92.0 :
23-7500 3.4 : 090-5019-00 Diode (Top)
Diode
Top <YELLOW>
:
3.45
090-5020-20T
22-9000
Diode Bottom, -0T Diode Top,
-0B
Diode
-0T Diode Top, -NL
23-8000 3.6 : 090-5001- use -0B
22-1080 4.3 : 090-5032- use No Lugs-X"Bot.,
-NL No Lugs-11" Leads
Leads <YEL-GRN> Wrap
Diode
(Top)
4.0
090-5005-00
:
23-8400
23-620/ 2.4 : 090-5006-00 DUAL-WOUND COIL, Diode Top X2
1N4004 (3-Lug), <>
231e2-765 3.6 : 090-5037-03 Diode Top
30-2600 75.0 :
24-9000 5.0 : 090-5002- use -02 Diode (Top), -10 No Lugs-14" Lds 23-700/ 3.0 : 090-5013-00 DUAL-WOUND COIL, Diode (Top)
<>
use -0B Diode Bottom, -0T Diode Top
30-2600 83.5 :
24-9400 5.5 : 090-5036090-5051-01 No Lugs-11" Leads
2.8 : 090-5012-00 DUAL-WOUND COIL, Diode (Top)
23-800/
<>
25-1240 9.3 : 090-5034-00 Diode Bottom
30-2600 90.5 :
-0B Diode Bottom, -0T Diode Top,
4.05 : 090-5020-30 Diode Top <GREEN>
23-9000
26-1200 10.3 : 090-5044- use -NL
No Lugs-11" Leads
23-1100 5.1 : 090-5030-0T Diode Top <ORANGE>
27-1300 14.2 : 090-5003-00 Diode (Top)
23-1200 7.1 : 090-5008-00 Diode Top <BLACK>
Diode
Bottom
27-1400 14.7 : 090-5015-00
23-1500 4.4 : 090-5062-00 Diode Top <BLUE>
27-1500 16.3 : 090-5004- use -0B Diode Bottom, -0T Diode Top
24-1570 9.5 : 090-5025-00 Diode Top <BLUE>
29-2000 33.6 : 090-5016-00 Diode (Top)
: 090-5067-0T Diode Top <RED>
25-1400
0$*1(7 &2,/6 /$5*( 0(',80 0,1,
: 090-5068-0T Diode Top <WHITE>
25-1600
20 -480 2.9 : 090-5064-02 Large No Lugs-14" Leads / No Core
25-1800 13.8 : 090-5041-0T Diode Top <BLUE-GREEN>
090-5042-00 Large No Lugs-6" Leads / No Core
0,1,&2,/6 5(6(7 75,3 $33/,&$7,216
22-6500 4.3 : 090-5042-01
Large No Lugs-12" Leads / No Core
: 090-5046-01 Diode Top, <>
24-7800 8.0 : 090-5061-00 Medium No Lugs-6" Leads / No Core 27-9500
29-1000 15.2 : 090-5059-00 Mini w/ Magnet Core, w/Lugs + Diode 28-1050 11.5 : 090-5046-00 Diode Top, <>
Mini w/ Mag. Core, Str. Lugs + Diode
: 090-5010-00 Diode (Top), <>
31-5900
31-1500 52.0 : 090-5054-00
090-5055-00 Mini w/ Mag. Core, 90° Lugs + Diode
35.0 : 515-6916-01 with Flap & Screw, <YELLOW>
32-1250
Ordering Note: Coils typically should not come with Coil Sleeves. IF A SLEEVE
w/ Mounting & Armature Brackets, <>
EXISTS, ensure it is the correct sleeve for the application usage. For the correct Coil
32-1800 50.2 : 515-6110-00
090-5031- use -0B Diode Bottom, -0T Diode Top
Sleeve, refer to the Assembly Drawing the coil exists on and order separately.
33-1590 59.0 : 515-6916-00 with Brackets, <WHITE>
Please Note: Ohm values may vary +/- .03: depending on meter calibration.
)OLSSHU&RLO:KLWH6WDU%RDUG6\VWHP2QO\*7DEOH
)/,33(56
63, 1ž *$8*(78516 &RORU
/2:(5 /()7
/2:(5 5,*+7
)/,33(56 QR (26 6ZLWFK
63, 1ž *$8*(78516 &RORU
833(5 /()7
833(5 5,*+7
* Note: For complete Appendix Information for Games Laser War through Batman Forever, see any Service Game Manual between Apollo 13 through
Ripley’s Believe It or Not!; or order CD-R, 970-2003-00 (The Simpsons Pinball Party, Terminator® 3 and The Lord of the Rings ).
Apollo 13
Golden Eye
Twister
ID4: Independence Day
Space Jam †
The Star Wars Trilogy Special Edition †
The Lost World: Jurassic Park †
The X-Files †
Starship Troopers †
Viper Night Drivin’ †
Lost In Space †
Godzilla †
South Park †
090-5032-0T
22-1080 -YEL-GRN090-5032-0T
22-1080 -YEL-GRN090-5020-20T
22-900 -YELLOW090-5032-0T
22-1080 -YEL-GRN090-5032-0T
22-1080 -YEL-GRN090-5032-0T
22-1080 -YEL-GRN090-5032-0T
22-1080 -YEL-GRN090-5032-0T
22-1080 -YEL-GRN090-5030-0T
23-1100 -ORANGE090-5030-0T
23-1100 -ORANGE090-5030-0T
23-1100 -ORANGE090-5032-0T
22-1080 -YEL-GRN090-5030-0T
23-1100 -ORANGE-
SAME
Not Used
Not Used
SAME
Not Used
Not Used
090-5032-0T
22-1080 -YEL-GRN-
Not Used
Not Used
SAME
Not Used
090-5020-30
23-900 -GREEN-
090-5020-20T
22-900 -YELLOW-
Not Used
Not Used
SAME
Not Used
Not Used
SAME
Not Used
Not Used
SAME
Not Used
Not Used
SAME
Not Used
090-5032-0T
22-1080 -YEL-GRN-
SAME
Not Used
Not Used
090-5032-0T
22-1080 -YEL-GRN-
Not Used
Not Used
SAME
Not Used
Not Used
SAME
Not Used
Not Used
Table continued on the next page.
† Coil Part Numbers ending with a "T" signifies the Diode is on the top
of the lug (on the coil-winding side); Coil Part Numbers ending with a
"B" signifies the Diode is on the bottom of the lugs.
$SSHQGL[(
&RLO&URVV5HI*XLGH
)OLSSHU&RLO7DEOH
$33(1',;(
)OLSSHU&RLO:KLWH6WDU%RDUG6\VWHP2QO\*7DEOH
*$0( 1$0(
Harley-Davidson® † and
1st through 3rd Editions
Striker Xtreme (NFL) †
Sharkey’s Shootout †
High Roller Casino †
Austin Powers• †
MONOPOLY® †
Playboy †
RollerCoaster Tycoon• †
The Simpsons• Pinball Party †
Terminator® 3:
Rise of the Machines• †
The Lord of the Rings• †
Ripley’s
Believe It or Not!® †
Elvis® †
1ž RI
)OLSSHUV
ZLWK
)OLSSHU
%DWV
)/,33(56 Z(26 6ZLWFK )/,33(56 QR (26 6ZLWFK
63, 1ž *$8*(78516 &RORU
63, 1ž *$8*(78516 &RORU
/2:(5 /()7
/2:(5 5,*+7
833(5 /()7
833(5 5,*+7
090-5032-0T
090-5030-0T
22-1080 -YEL-GRN23-1100 -ORANGE090-5032-0T
090-5030-0T
22-1080 -YEL-GRN23-1100 -ORANGE090-5030-0T
SAME
23-1100 -ORANGE090-5020-20T
090-5032-0T
22-900 -YELLOW22-1080 -YEL-GRN090-5020-30
090-5030-0T
23-900 -GREEN23-1100 -ORANGE090-5032-0T
SAME
22-1080 -YEL-GRN090-5030-0T
SAME
23-1100 -ORANGE090-5032-0T
SAME
22-1080 -YEL-GRN090-5032-0T
SAME
22-1080 -YEL-GRN** The Homer Head Assembly is affixed to an
Upr. Rt. Style Flipper
** 090-5020-20T
(no E.O.S. Switch):
22-900 -YELLOW090-5032-0T
SAME
22-1080 -YEL-GRN090-5020-20T
SAME
22-900 -YELLOW090-5032-0T
SAME
22-1080 -YEL-GRN090-5020-20T
SAME
22-900 -YELLOW-
Not Used
Not Used
090-5030-0T
23-1100 -ORANGE090-5030-0T
23-1100 -ORANGE-
Not Used
Not Used
Not Used
Not Used
Not Used
Not Used
Not Used
090-5062-0T
23-1500 -BLUE-
Not Used
Not Used
090-5067-0T
25-1400 -RED-
090-5068-0T
25-1600 -WHITE090-5030-0T
23-1100 -ORANGE-
Not Used
)OLSSHUV 0LQL%DWV RQ QG /HYHO 3OD\ILHOG
090-5041-00T
25-1800 -BLU-GRN-
090-5025-00
24-1570 -BLUE-
Not Used
Not Used
Not Used
Not Used
Not Used
090-5067-00T
25-1400 -RED-
090-5020-30
23-900 -GREEN-
SAME
† Coil Part Numbers ending with a "T" signifies the Diode is on the top
of the lug (on the coil-winding side); Coil Part Numbers ending with a
"B" signifies the Diode is on the bottom of the lugs.
&RLO&URVV5HI*XLGH
)OLSSHU&RLO7DEOH
$SSHQGL[(
$33(1',;)
0RWRU6SHFLILFDWLRQ:KLWH6WDU%RDUG6\VWHP2QO\*7DEOH
*DPH 1DPH
)XQFWLRQ
6SHFLILFDWLRQV
3DUW 1ž
Rocket
Up/Down Movement
Moon Unit
Rotational Orbit
Bowman Motor 24v A.C.
60Hz 3W 6 RPM CCW
Multi Products Motor 24v A.C.
50/60Hz 3W 6 RPM CCW
Johnson Motor (Vibrator) 10.5v D.C.
10 AMP 2950 RPM CW
Bowman Motor 24v A.C.
60Hz 3W 6 RPM CW
Multi Products Motor 24v A.C. (041-5026-00)
50/60Hz 3W 325 RPM CCW
Multi Products Motor 24v A.C. (041-5052-00)
50/60Hz 3W 3600 RPM CW
Servo Motor
(94322)
515-6383-00
* Note: For complete Appendix Info. for Games Laser War through Batman Forever, see any Service Game Manual between Apollo 13 through Ripley’s or
on-line at our website www.sternpinball.com/parts.htm; also available on CD-R, 970-2003-00 (The Simpsons• Pinball Party, T3® and The Lord of the Rings• ).
Apollo 13
Shaker
Satellite
Left/Right Movement
Spinning Disc
with Magnet
Backbox Fan
(Tornado Wind)
Alien Head
Open/Close Movement
Golden Eye
Twister
ID4: Independence Day
incl. Connector
515-6487-00
incl. Connector
041-5029-00
MOTOR ONLY
515-6528-00
incl. Connector
515-6347-00
incl. Connector
515-6531-00
incl. Connector
041-5045-00
MOTOR ONLY
SPACE JAM (NO MOTOR USED)
The Star Wars Trilogy - S.E.
The Lost World: J.P.
The X-Files
Starship Troopers
X-Wing
Left/Right Movement
Snagger & Center Link
Lift Up/Down Movement
Bowman Motor 24v A.C. (041-5058-00)
60Hz 3W 10 RPM CCW
Multi Products Motor 20v D.C. (041-5059-03)
9 RPM Non-Directional
Johnson
Motor (Vibrator) 10.5v D.C.
Shaker
10 AMP 2950 RPM CW
X-File Cabinet
Multi Products Motor 20v D.C.
Lift Up/Down Movement
9 RPM CCW
Haydon Switch & Instrument, Inc. Stepper Motor
Warrior Bug
12v D.C. 4.6W (041-5062-00), Series 36000:
Forward/Reverse Movement 1.4"ø (Non-Captive Shaft not incl.) HSI #36864-12
(Unipolar) Travel per Step: .004 Step Angle: 15°
515-6383-01
incl. Connector
515-6715-03
incl. Connector
041-5029-00
MOTOR ONLY
041-5057-00
MOTOR ONLY
515-6794-00
incl. Connector
Requires 7" Shaft:
530-5503-00
VIPER NIGHT DRIVIN’ (NO MOTOR USED)
Lost In Space
Godzilla
Spinning Disc
with Magnet
Shaker ‡
Multi Products Motor 24v A.C. (041-5046-00)
50/60Hz 3W 325 RPM CCW
Johnson Motor (Vibrator) 10.5v D.C.
10 AMP 2950 RPM CW ‡
515-6347-00
incl. Connector
041-5029-01
MOTOR ONLY
SOUTH PARK (NO MOTOR USED)
Johnson Motor (Vibrator) 10.5v D.C.
041-5029-01
10 AMP 2950 RPM CW ‡
MOTOR ONLY
Motorcycle
Autotrol 24v A.C. (041-5072-02)
515-7025-00
Lift Up/Down Movement
20 RPM CCW
incl. Connector
Goalie (Linebacker)
Multi #3590 12v D.C. (041-5075-00)
515-7071-00
Striker Xtreme (NFL)
Left to Right Movement
60 RPM
incl. Connector
Mystery Ball
Hankscraft Motor Model-E 24v A.C. (041-5076-00) 515-7095-00
Sharkey’s Shootout
Rotating Movement
50/60Hz 3W 20 RPM CW
incl. Connector
Roulette Wheel
Multi Products Motor 20V D.C. (041-5078-00)
515-7153-00
Rotating Movement
17 RPM CCW
incl. Connector
Haydon Switch & Instrument, Inc. Stepper Motor
515-6794-00
High Roller Casino
Up/Dn. Ramp in Slot Mach.
12v D.C. 4.6W (041-5062-00), Series 36000:
incl. Connector
1.4"ø (Non-Captive Shaft not incl.) HSI #36864-12 Requires Shaft 4":
Lift Up/Down Movement
(Unipolar) Travel per Step: .004 Step Angle: 15°
530-5503-01
Time Machine
Multi Products Motor 24v A.C. (041-5079-00)
515-7141-00
Rotating Movement
50/60Hz 20RPM CCW
incl. Connector
Laser
Beam
Autotrol
Motor 24V A.C. (041-5081-00)
515-7171-00
Austin Powers
Left to Right Directional
50/60Hz 4W 10RPM Bi-Directional
incl. Connector
Dr. Evil Target
Hankscraft Motor Model-E 24v A.C. (041-5030-00) 515-5900-00
Lift Up/Down Movement
50/60Hz 6RPM CCW
incl. Connector
Mini-Flipper (Waterworks)
Multi Prod. Motor & Gear Box #7000 EX00159A
041-5083-00
Monopoly®
Rotating Movement
20v D.C. 50/60Hz 85RPM CC/CCW
MOTOR ONLY
Triangular Billboard
Autotrol Motor (BD511 150-1387) 24v A.C.
041-5086-02
Rotating Movement
50/60Hz 12RPM Bi-Directional
MOTOR ONLY
Centerfold Mechanism
Multi Products (3680) Motor 12v DC
041-5075-04
Open/Close Movement
10/12 RPM CC/CCW
MOTOR ONLY
Playboy
Haydon Switch & Instrument, Inc. Stepper Motor
515-6794-00
Tease Drop Screen
12v D.C. 4.6W (041-5062-00), Series 36000:
incl. Connector
Lift Up/Down Movement
1.4"ø (Non-Captive Shaft not incl.) HSI #36864-12
Requires 7" Shaft:
(Unipolar) Travel per Step: .004 Step Angle: 15°
530-5503-00
‡ Please Note:
"-01" Shaker Motor is Not Compatible with old Shaker Motor 041-5029-00 (Shaker Motor Assy. 515-5893-00).
THIS NEW MOTOR CAN ONLY BE USED IN NEW SHAKER MOTOR ASSY. 515-5893-01.
Harley-Davidson®
1st through 3rd Editions
Shaker ‡
Table continued on the next page.
$SSHQGL[)
0RWRU6SHFLILFDWLRQ
7DEOH
$33(1',;)
0RWRU6SHFLILFDWLRQ:KLWH6WDU%RDUG6\VWHP2QO\*7DEOH
*DPH 1DPH
)XQFWLRQ
6SHFLILFDWLRQV
3DUW 1ž
Terminator® 3:
Rise of the Machines
Backbox Ball Shooter
Up/Down Movement
Multi Products Motor 24V A.C. (041-5079-01)
21 RPM CW
515-7317-00
The Lord of the Rings
Balrog (Motor & Gate)
Open/Close Movement
Multi Prod. Motor 20V D.C. Series 600B (or equiv.)
50/60Hz 10 RPM Bi-Directional
041-5088-01
ROLLERCOASTER TYCOON
(NO MOTOR USED)
THE SIMPSONS PINBALL PARTY (NO MOTOR USED)
incl. Connector
MOTOR ONLY
RIPLEY’S BELIEVE IT OR NOT!® (NO MOTOR USED)
Elvis®
Elvis•
Front/Back Movement
::: OPTIONAL 999
Shaker
0RWRU6SHFLILFDWLRQ
7DEOH
Haydon Switch & Instrument, Inc. Stepper Motor
12v D.C. 10W (041-5089-00),
HSI #46868-12-002
Johnson Motor (Vibrator) 10.5v D.C. (041-5029-01)
10 AMP 2950 RPM CW & Wiring Harness
500-6809-00
incl. Connector
Requires 7.25" Shaft:
530-5658-00
515-5893-01
incl. Connector
$SSHQGL[)
$33(1',;*
3DUW1XPEHU3UHIL[&ODVVLILFDWLRQ&RGHV
I.
Electrical Source, Energy & Signal Converters
010- Transformers
031- Speakers
090- Solenoids (Coils)
II.
Conductors, Connectors & Insulators
034- Line Cords
036- Cable and Harness Assemblies
041- Motors
045- Connectors (All Types)
077- Lamp Sockets
III.
Circuits & Circuit Elements
100- ICs
110- Transistors
112- Diodes
121- Resistors
123- Resistors (Variable & Adjustable)
124- Regulators & Bridge Rectifiers
125- CAPS
140- Crystals
165- Light Bulbs
180- Switches
190- Relays
IV.
Bolts, Screws, Nuts & Washers
231- Bolts
232- Screws (Pan Head)
234- Screws (HWH)
237- Screws (Misc.)
240- Nuts (Misc.)
242- Washers (Flat, Round)
244- Washers (Split Lock)
246- Washers (Lockers, External Tooth)
V.
Mechanical Components
249- Rivets
251- Pins (Dowel)
254- Stand-Offs, Spacers and Shims
260- Steel Ball
265- Springs (Extension)
266- Springs (Compression)
269- Springs (Washers - Belleville, Wave)
280- Grommets and Bushing
VI.
Handles, Locks, Catches & Latches, Keys & Hinges
355- Handles, Locks, Catches & Latches and Keys
390- Hinges
VII.
Fabricated Parts (In-House Assemblies)
500- End Product (Systems and Models)
515- Sub-Assemblies
520- Printed Circuit Boards (PCBs)
522- Display Glass
525- Wood Parts
530- Screw Machined Parts
535- Fabricated Parts
545- Molded (Extruded) Plastic/Rubber Parts
550- Molded (Inserts)
VIII. Bulk Materials
600- Braided Ground Wire
601- Stranded Wire
602- Ribbon Cable
605- Sleeving (Shrink Tubing)
626- Foam Rubber
IX.
$SSHQGL[*
Miscellaneous
705- Packing & Shipping Items
820- Decals and Labels (Sets & Misc.)
830- Butyrate (Plastic Pieces)
900- Game Posters
960- EPROM (Raw Part)
965- EPROM (Programmed Part)
3DUW1XPEHU3UHIL[
&ODVVLILFDWLRQ&RGHV
$33(1',;+
3OD\ILHOG,QVHUWV3ODVWLF/LJKW&RYHUV
Patterns:
STARBURST
STARBURST
CIRCULAR
5e8"
STIPPLE
STARBURST
CIRCULAR
3e4"
ø
ø
550-5001-XX
PLAIN
CIRCULAR
STARBURST
CIRCULAR
STARBURST
CIRCULAR
STARBURST
CIRCULAR
1" ø
1-3/16" ø
1-1e2" ø
550-5002-XX
PLAIN
CIRCULAR
550-5003-XX
PLAIN
CIRCULAR
550-5004-XX
PLAIN
CIRCULAR
1" ø
1-3/16" ø
1-1e2" ø
550-5009-XX
ROLLOVER
BUTTON BASE
550-5010-XX
WHITE STAR
(only in white)
STARBURST
CIRCULAR
550-5000-XX
STARBURST
CIRCULAR
2-1e4" ø
2-3e4" ø
550-5005-XX
PLAIN
CIRCULAR
550-5006-XX
PLAIN
CIRCULAR
550-5007-XX
STIPPLE
CIRCULAR
550-5008-XX
STIPPLE
1" SQUARE
2-1e4" ø
2-3e4" ø
1" ø
12"
3e4"
ø
550-5019-XX
550-5026-XX
550-5048-XX
545-5015-00
550-5011-XX
550-5012-XX
STIPPLE
STIPPLE
STARBURST
PLAIN
PLAIN
PLAIN
RECTANGULAR RECTANGULAR RECTANGULAR RECTANGULAR RECTANGULAR RECTANGULAR
1-1e2" X 3e4"
1-5e8" X 1-1e2"
2-1e4" X 1-1e8"
2-1e4" X 1-1e8"
1-1e4" X 1-1e2"
2" X 2-1e2"
550-5018-XX
STARBURST
MINI SHIELD
550-5051-XX
STARBURST
LARGE SHIELD
550-5044-XX
MINI
HOT DOG
550-5049-XX
BEVEL
HOT DOG
550-5050-XX
PLAIN
HOT DOG
550-5063-XX
BANANA
1-5/8"
3-1e2"
3-1e2"
550-5020-XX
STARBURST
ARROW-HEAD
SMALL
550-5021-XX
STARBURST
ARROW-HEAD
LARGE
550-5022-XX
STARBURST
BULLET
550-5023-XX
STARBURST
TRIANGLE
550-5014-XX
550-5015-XX
550-5016-XX
550-5017-XX
1" X 1"
550-5024-XX
550-5025-XX
STARBURST
STARBURST
ARROW-SMALL ARROW-LARGE
550-5013-XX
550-5070-XX
Note: The shapes and sizes shown above are not to scale. Some shapes may no longer be available in every color.
Instructions:
1º
&RORU
Parts which may come in various colors (i.e. targets, some posts, playfield inserts, etc.) end in a 2-digit Nº which correspond
to the color of that part. The "-XX" in Part Nºs which may come in various colors should be replaced with the desired 2-Digit
Nº. corresponding to the color desired. Not all colors may be available.
1º
&RORU
-00 Black or Solid Clear -03 Amber
-01 Clear
-04 Green
-02 Red
-05 Blue
3OD\ILHOG,QVHUWV
3ODVWLF/LJKW&RYHUV
1º
3/$67,& 3$57 &2/25 &+$57
&RORU
-06 Yellow
-07 Orange
-08 White
1º
&RORU
-09 Purple
-10 Fluor. Orange
-11 Fluor. Green
1º
&RORU
-12 Fluor. Blue
-13 Teal Green
-14 Gray
1º
&RORU
-15 Luminescent
-16 Gold
-17 Trans. Brown
$SSHQGL[+
$33(1',;,
6WDQG8S7DUJHWV
"R" means
«Target
Insert» is
reversed,
allowing
for Rear
Mounted
application.
5
7DNH1RWH
1.
2.
For Items A-E, for the Target Assembly use the "500-" SPI Nº;
For the Target Assy. with Rear Mount add "R" to "500-" SPI Nº;
For just the «Target Insert» use the "545-" SPI Nº.
Items A-E come in various colors. These targets may not be
available in every color. The "-XX" in should be replaced with the
desired 2-Digit Nº for the color desired described in the Chart .
As of date of print, the following colors were used for Items A-E:
Ç
-01 Clear (A, D); -02 Red (A, B, C, D, E); -03 Amber (D, E); -04 Green (A, B);
-05 Blue (C); -06 Yellow (A, C), -09 Purple (B, D); -11 Fluorescent Green (A, B, D).
3.
Nº
A
B
C
See Section 3, Chapter 2, Go To Diagnostics Menu, for switches
used corresponding to the Switch Matrix Grid of this game.
67$1'83 7$5*(7 1$0(
63, 3$57 1º
Modular Stand-Up Target Narrow Assy.
Stand-Up Target Narrow (Insert)
Modular Stand-Up Target Square Assy.
Stand-Up Target Square (Insert)
Modular Stand-Up Target Rectangle Assy.
Stand-Up Target Rectangle (Insert)
)
$
67$1'83 7$5*(7 1$0(
&
%
'
&RORU
Black
Clear
Red
Amber
Green
Blue
Yellow
Orange
White
Purple
Fluor. Orange
Fluor. Green
Fluor. Blue
Teal Green
Gray
Luminescent
Gold
63, 3$57 1º
Modular Stand-Up Target Round Assy.
500-6075-XX
D Stand-Up Target Round (Insert)
545-6075-XX
Mod. Stand-Up Target 1" Spherical Assy.
500-6189-XX
E Stand-Up Target 1" Spherical (Insert)
545-6189-XX
Note: To receive the Target Assembly with the « Target Insert »
« Reversed » simply add a "R" at the end of the Part Nº. See Side
View picture above to compare (dashed line shows target reversed).
Nº
500-6138-XX
545-6138-XX
500-6139-XX
545-6139-XX
500-6228-XX
545-6228-XX
1º
-00
-01
-02
-03
-04
-05
-06
-07
-08
-09
-10
-11
-12
-13
-14
-15
-16
3/$67,& 3$57
&2/25 &+$57
(
7DNH1RWH
1.
2.
3.
For Items 1-4, "single" components can be ordered.
Items 1-4 come in various colors. These targets may not be
available in every color. The "-XX" in Part Nºs should be
replaced with the desired 2-Digit Nº for the color desired
described in the above Chart.
For switches used corresponding to the Switch Matrix
Grid of this game, see Sec. 3, Chp. 2, ...Diagnostics.
63, 3$57 1º Nº
63, 3$57 1º
67$1'83 )/$7 7$5*(7 1$0(
Note: Item 2A, is a riveted Sub-Assy. which includes the following items for reference:
1" Round Stand-Up Target Assy.
500-5835-XX ‡A1—
Stack Switch Radius End (180-5133-00), A2— Washer 5/16" (242-5017-00),
A3— Rivet 1/8" ø X 3/16" (249-5001-00) and A4— Rectangular Target (545-5145-XX).
ORDERING ABOVE (ITEM 1) ASSY. PART Nº WILL INCLUDE:
1A‡ Switch & Target Assy. 1" Round
515-5966-XX
3 1" Sq. Stand-Up Target Assy.
500-5232-XX
1B
535-6896-00
Mounting Bracket
ORDERING ABOVE (ITEM 3) ASSY. PART Nº WILL INCLUDE:
1C
535-6452-00
Switch Back Plate
3A‡ Sw. & Target Assy. 1" Square
515-5162-XX
1D
237-5976-05
6-32 X 3e4 HWH Swage (Qty. 2)
Items 3B-F are identical to 1B-F
Same as 1B-F
1E
112-5001-00
Switch Diode, 1N4001
‡ Note: Item 3A, is a riveted Sub-Assy. which includes the following items for reference:
1F
626-5029-00
Foam Pad
Stack Switch Radius End (180-5133-00),
Washer 5/16" (242-5017-00),
Nº
67$1'83 )/$7 7$5*(7 1$0(
1
‡ Note: Item 1A, is a riveted Sub-Assy. which includes the following items for reference:
A1— Stack Switch Radius End (180-5133-00), A2— Washer 5/16" (242-5017-00),
A3— Rivet 1/8" ø X 3/16" (249-5001-00) and A4— 1" Round Target (545-5456-XX).
A1—
A2—
A3— Rivet 1/8" ø X 3/16" (249-5001-00) and A4— 1" Square Target (545-5470-XX).
4 Narrow Stand-Up Target Assy.
500-5857-XX
1" X 11e2" Stand-Up Rect. Target Assy.
500-5321-XX ORDERING ABOVE (ITEM 4) ASSY. PART Nº WILL INCLUDE:
4A‡ Sw. & Target Assy. Narrow
515-5967-XX
ORDERING ABOVE (ITEM 2) ASSY. PART Nº WILL INCLUDE:
Same as 1B-F
Items 4B-F are identical to 1B-F
2A‡ Sw. & Target Assy. 1" X 11e2" Rect.
515-6027-XX
‡ Note: Item 4A, is a riveted Sub-Assy. which includes the following items for reference:
Items 2B-F are identical to 1B-F
Same as 1B-F
A1— Stack Switch Square End (180-5132-00),
Item 2 Table Note continued in the next column.
A2— Washer 5/16" (242-5017-00),
2
$SSHQGL[,
A3— Rivet 1/8" ø X 3/16" (249-5001-00) and
A4— Narrow Target (545-5210-XX).
6WDQG8S
7DUJHWV
to open Coin Card Files, insert Disc 2
$33(1',;&RLQ&DUGV86$,QWHUQDWLRQDO3ULFLQJ'HIDXOWV:)RU<HOORZ6WRFNDGG<WRWKH3DUW1XPEHU
If more than one Pricing Scheme is shown (available) for countries listed, the F. listed beside the option, denotes the Factory Default Setting.
USA 8 or CANADA
USA 5 F.
USA 1 (*OPTIONAL)
USA 2-7 or CANADA
FOR CUSTOM PRICING †
USA 1 (*OPTIONAL)
Backside is Blank
(Border Only)
Typeset your
Custom Pricing
755-5400-00 Front
755-5400-00 Back
USA 3 with ToPS
USA 5 with ToPS
755-5400-01 Front
755-5400-02 Front
US, CAN., AUST. or N.Z. with ToPS
...CUSTOM PRICING †
755-5400-01 or -02 Back
755-5400-05 1-Side Only
(*OPTIONAL) Any Country Setting Option = 1 Play per Click
Backside is Blank
(Border Only)
Typeset your
Custom Pricing
755-5400-03 Front
755-5400-03 Back
755-5400-04 Back
755-5400-04 Back
755-5400-06 Front
755-5400-06 Back
AUSTRALIA 1 F.
AUSTRALIA 2
CROATIA
FOR CUSTOM PRICING †
DENMARK 1 F.
DENMARK 2
Backside is Blank
(Border Only)
Typeset your
Custom Pricing
755-5406-00 Front
755-5406-00 Back
755-5410-00 Front
755-5410-00 Back
755-5402-00 Front
755-5402-00 Back
JAPAN 1
JAPAN 2 F.
NEW ZEALAND 1 F.
NEW ZEALAND 2
NORWAY 1 F.
NORWAY 2
755-5408-01 Front
755-5408-01 Back
755-5406-00 Back
755-5406-00 Front
755-5403-00 Front
755-5403-00 Back
SOUTH AFRICA
FOR CUSTOM PRICING †
SWEDEN 1 F.
SWEDEN 2
SWITZERLAND 1 F.
SWITZERLAND 2
755-5405-00 Back
Backside is Blank
(Border Only)
Typeset your
Custom Pricing
755-5409-01 Front
755-5409-01 Back
755-5404-00 Front
755-5404-00 Back
755-5405-00 Front
UK 1
UK 3
UK 5 F.
FOR CUSTOM PRICING †
UK with ToPS
FOR CUSTOM PRICING †
Backside is Blank
(Border Only)
Typeset your
Custom Pricing
Backside is Blank
(Border Only)
Typeset your
Custom Pricing
755-5407-00 Front
755-5407-00 Back
755-5407-01 Front
755-5407-01 Back
755-5407-02 Front
755-5407-02 Back
EURO 1
EURO 2
EURO 3
EURO 4
EURO 5
EURO 6
755-5401-01 1-Side Only
755-5401-02 1-Side Only
755-5401-03 1-Side Only
755-5401-04 1-Side Only
755-5401-05 1-Side Only
755-5401-06 1-Side Only
EURO 7
EURO 8
EURO 9
EURO 10
EURO 11
EURO 12
755-5401-07 1-Side Only
EURO with ToPS
755-5401-08 1-Side Only
FOR CUSTOM PRICING †
Backside is Blank
(Border Only)
Typeset your
Custom Pricing
755-5401-20 Front
EURO 1
BELGIUM
ITALY 1
PORTUGAL
EURO 2
755-5401-20 Back
EURO 3
GERMANY 2 NETHERLANDS
SPAIN
EURO 4
755-5401-09 1-Side Only
755-5401-10 1-Side Only
755-5401-11 1-Side Only
755-5401-12 1-Side Only
Appendix J Notes: 1. Coin Card(s) on Game is (are) determined by original shipping country destination.
2. Coin Cards which are *Optional and not shipped with game, are available via your distributor or via download (see Note 5.)
3. Coin Cards which have a Blank Back-side can be used for †Custom Pricing.
4. ToPS• (Tournament Pinball System). For more information on Tournaments, see Sec. 3, Chp. 7, Go To Tournament Menu,
4. or visit our website www.sternpinball.com (click on Tournament Button).
5. You can download any Coin Card (in PDF Format, Adobe® Reader v5.0 required) from our website www.sternpinball.com/
5. coinagecards.htm or follow link(s) for information on getting all Coin Cards on a CD-R or Reader v5.0. Older style Coin
5. Cards (foreign or domestic), not on the website or no longer available through your distributor, are obsolete.
[ EURO FACTORY DEFAULT SUMMARY TABLE \
EURO 5
EURO 6
GREECE
EURO 7
EURO 8
EURO 9
EURO 10
FINLAND
AUSTRIA
FRANCE
EURO 11
EURO 12
Section 3, Chapter 4, GO TO ADJUSTMENTS MENU, Adj. 11, Game Pricing, USA & International (non-Euro) and Euro 1-12 Summary &
International (Euro) Standard Pricing Select Tables, summarizes Custom or Standard Pricing Schemes above Coin Cards represent.
&RLQ&DUGV86$,QWHU
QDWLRQDO3ULFLQJ'HIDXOWV
$SSHQGL[-
3DUWV2UGHU&KHFNOLVW1RWHV
'DWH 2UGHUHG
3
3DUW 1º
4W\
'HVFULSWLRQ
'DWH 5HFHLYHG
3DUWV2UGHU
&KHFNOLVW1RWHV
*/266$5<2)7(506
A Followed after a number means "Amp." or Ampage in an expression relating to an electrical object. (e.g. 8A).
AC (Acronym) Alternating Current.
Adj. (Abbreviation) Adjustment(s).
Assy. (Abbreviation) Assembly.
Au. (Abbreviation) Audit(s).
Bd. (Abbreviation) Board.
BOT (Abbreviation) Bottom.
Brkt. (Abbreviation) Bracket.
Bridge Rectifier A configuration of a diode that allows current to
flow in one direction producing both positive and negative pulsating DC Voltages.
Color Coding See Appendix H or I, Plastic Part Color Chart or Section 4, Chapter 1, Playfield - Plastic Posts & Spacers.
Combination (Combo) [Shot] Any variable pinball shot(s) made
successively.
Conn. (Abbreviation) Connector.
CMOS Short for COSMOS (Complementary Symmetry M.O.S.);
Complementary Metal-Oxide Semi-Conductor.
CN (Abbreviation) Connector (e.g. CN5-P3).
CT (Abbreviation) Center.
DC (Abbreviation) Direct Current.
DT (Abbreviation) Drop Target(s).
DOTS (Acronym) Diode On Terminal Strip.
EB (Abbreviation) Extra Ball.
Eject Playfield surface device to kick ball back into play; Saucer.
EPROM (Acronym) Erasable Programmable Read Only Memory.
Can be erased using UV Light and re-programmed.
e.g. (Abbreviation) Latin- Exempli gratia. For Example.
EOS (Acronym) End-Of-Stroke (i.e. Switch for flipper).
F (Abbreviation) Fuse (i.e. F23).
GA-Turn Gauge & Turn describing the windings on a coil (e.g. 23800, 23 is the gauge of wire and 800 is the amount of windings.
G.I. (Abbreviation) General Illumination (Lamps).
HWH (Abbreviation) Hex Washer Head.
IC (Acronym) Integrated Circuit (As in after 24-Pin IC).
ID or I.D. (Acronym) Inside Dimension.
i.e. (Abbreviation) Latin- Id est. That is.
IO or I/O (Abbreviation) Input / Output (e.g. I/O Power Driver Bd.)
LT, Lt. or L. (Abbreviation) Left.
Laser Kick A coil/plunger used above the playfield to kick pinball
back into play.
LED (Acronym) Light Emitting Diode.
Loop [Shot] Continuously up a ramp and back to the flipper.
Lwr. (Abbreviation) Lower.
Orbit [Shot] From the left or right flipper around the back rail of the
playfield back to the flipper.
MB (Abbreviation) Magnet Board.
M-BALL or MBALL (Abbreviation) Multiball• More than 1 ball in
game play.
MID (Abbreviation) Middle
Non-Reflexive See Reflexive.
No. or Nº or # (Abbreviation) Number
NPF (Acronym) No Problem Found.
N.C. or NC (Abbreviation) Normally Closed.
N.O. or NO (Abbreviation) Normally Open.
NS (Abbreviation) Not Stuffed. (Use in Part Listings, Sec. 5)
OD or O.D. (Abbreviation) Outside Dimension.
P (Abbreviation) Pin (e.g. CN5-P3).
PCB (Acronym) Printed Circuit Board
*ORVVDU\
RI7HUPV
P/F (Abbreviation) Playfield.
PIA LED (Acronym) Peripheral Interface Adapter Light Emitting Diode.. This is a diagnostic LED on the CPU; it should not be lit
during normal operation of a pinball game.
Plumb Bob Tilt Weight on Tilt Assembly.
PPH (Abbreviation) Phillips Pan Head.
Pop(s) Another term for Turbo Bumper(s).
PPB (Acronym) Playfield Power Board ("Popcorn-Popping Bd.").
PREV (Abbreviation) Previous.
PSB (Abbreviation) Power Supply Board
RAM (Acronym) Random Access Memory. RAM can store input instructions and supply output information.
Reflexive/Non-Reflexive Reflexive—Solenoid Drive Transistor is
enabled directly by a switch closure on the (Relating to CPU
Boards) solenoid assembly (Ver. 1/2).
Non-Reflexive—Solenoid Drive Transistor is enabled by the
CPU after reading a switch closure in the Switch Matrix (Ver.
3). Also note: All CPU Boards are backwards compatible (e.g.
Jurassic Park/Ver. 3 to Time Machine/ Ver. 2). Swapping a
Ver. 2 Board to a Ver. 3 is not possible due to the special solenoids section (i.e. Slingshots, Turbo Bumpers, etc.) changing
from REFLEXIVE to NON-REFLEXIVE on Ver. 3 Boards.
Relay An automatic switch operated by current in a coil.
ROM (Acronym) Read Only Memory. ROM cannot store input instructions but can supply output information. ROM can be programmed only once.
RMA (Abbreviation) Return Merchandise Authorization Number
RT, Rt. or R. (Abbreviation) Right; ("R" at the end of Target Assy.
Part Nº signifies Target Insert is Reversed.)
RO (Abbreviation) Rollover (switches).
Saucer See Eject.
Scoop A hole into the playfield. A metal scoop is in place to guide
the ball into the kick-back under the playfield.
Slam Tilt A switch which closes when the game is slammed into or
the Coin Door is slammed shut. Depending on adjustable settings, will cancel game in play when the number of closures required is achieved.
SMB (Abbreviation) Shaker Motor Board.
Solenoid A coil used for Electro Magnetic devices such as relays,
flippers, slingshots, etc.
SSFB (Abbreviation) Solid State Flipper Board.
STEP Refers to the service switches on the coin door.
Sub-Assy. (Abbreviation) Sub-Assembly.
S-U or S/U (Abbreviation) Stand-Up ( targets).
TM (Abbreviation) Trademark
Transfer [Shot] Maneuvering the ball in play from one flipper to the
other. With flipper in the up position and the ball cradled by that
flipper one would activate the flipper button in a quick repetitive
manner to bounce the ball to the other side. Skilled players
can rebound the ball off the slingshot.
Tri-Ball Three balls in play.
TTL (Abbreviation) Transistor-Transistor Logic
Upr. (Abbreviation) Upper.
V or v (Abbreviation) Volt(s).
Ver. (Abbreviation) Version.
VUK (Acronym) Vertical Up-Kicker (Super or Standard).
X (Abbreviation) "Times" A multiplier; also used in dimensions.
X-Ball An undetermined number of ball(s) during game play.
Zener Diode A semi-conductor diode used for voltage regulation.
Application depends on reverse break-down voltage.
"-00B" "B" at the end of Coil Part Numbers signifies that the diode
is attached to the bottom of the lug.
"-00T" "T" at the end of Coil Part Numbers signifies that the diode
is attached to the top of the lug (the side nearest the coil-winding).
*ORVVDU\
RI7HUPV
6 7 ( 5 1 Š 3 , 1 % $ / / , 1 & / , 0 , 7 ( ' : $ 5 5 $ 1 7 <
67(51Š 3,1%$// ,1& 6(//(5 :$55$176 21/< 72 7+( ,1,7,$/ 385&+$6(5 2) ,76 352'8&76 7+$7 7+(
,7(06 /,67(' %(/2:
81'(5 1250$/ 86( $1'
: $ $5(
5 5 )5((
$ 1 7)520
< 3 '()(&76
( 5 , 2 ',1 0$7(5,$/
6 3 ( & ,$1'
) , :25.0$16+,3
('
6(59,&( )25 7+(
35,17(' &,5&8,7 %2$5'6 *$0( /2*,&
'27 0$75,; ',63/$< %2$5'6
0217+6
0217+6
12 27+(5 3$576 2) 6(//(5·6 352'8&7 $5( :$55$17('
:$55$17< 3(5,2'6 $5( ())(&7,9( )520 7+( ,1,7,$/ '$7( 2) 6+,30(17 )520 6(//(5 72 ,76 $87+25,=('
',675,%87256
6(//(5·6 62/( /,$%,/,7< 6+$// %( $7 ,76 237,21 72 5(3$,5 25 5(3/$&( 352'8&76 :+,&+ $5( 5(7851(' 72
6(//(5 '85,1* 7+( :$55$17< 3(5,2'6 63(&,),(' 3529,'('
6(//(5 ,6 127,),(' 352037/< 8321 ',6&29(5< %< 385&+$6(5 7+$7 67$7(' 352'8&76 $5( '()(&7,9(
68&+ 352'8&76 $5( 3523(5/< 3$&.$*(' $1' 7+(1 5(7851(' )5(,*+7 35(3$,' 72 6(//(5·6 3/$17
7+,6 :$55$17< '2(6 127 $33/< 72 $1< 3$576 '$0$*(' '85,1* 6+,30(17 $1'25 '8( 72 ,03523(5
+$1'/,1* 25 '8( 72 ,03523(5 ,167$//$7,21 25 86$*( 25 $/7(5$7,21 ,1 12 (9(17 6+$// 7+( 6(//(5 %(
/,$%/( )25 $1< $17,&,3$7(' 352),76 /266 2) 352),76 /266 2) 86( $&&,'(17$/ 25 &216(48(17,$/
'$0$*(6 25 $1< 27+(5 /266(6 ,1&855(' %< 7+( &86720(5 ,1 &211(&7,21 :,7+ 7+( 385&+$6( 2) $
67(51Š 3,1%$// ,1& 352'8&7
:$55$17< ',6&/$,0(5
(;&(37 $6 63(&,),&$//< 3529,'(' ,1 $ :5,77(1 &2175$&7 %(7:((1 6(//(5 $1' 385&+$6(5 7+(5( $5( 12
27+(5 :$55$17,(6 (;35(66 25 ,03/,(' ,1&/8',1* $1< ,03/,(' :$55$17,(6 2) 0(5&+$17$%,/,7< 25
),71(66 )25 $ 3$57,&8/$5 385326(
& $ 8 7 , 2 1 6 : $ 5 1 , 1 * 6 1 2 7 , & ( 6
&DXWLRQ
)25 6$)(7< $1' 5(/,$%,/,7< 68%67,787( 3$576 $1' (48,30(17 02',),&$7,216 $5( 127 5(&200(1'('
$1' 0$< 92,' $1< :$55$17,(6 86( 2) 12167(51Š 3,1%$// ,1& 3$576 25 02',),&$7,216 2) *$0(
&,5&8,75< 0$< $'9(56(/< $))(&7 *$0( 3/$< 25 0$< &$86( ,1-85,(6 75$163257 3,1%$// *$0(6 :,7+
+,1*(' %$&.%2; ,1 7+( '2:1 326,7,21 21/< $/:$<6 7$.( *5($7 &$5( :+(1 6(59,&,1* $1< *$0(
$/:$<6 5($' 7+( 6(59,&( 0$18$/ %()25( 5(3/$&,1* 25 6(59,&,1* &20321(176 68%67,787,216 2)
3$576 25 (48,30(17 02',),&$7,216 0$< 92,' )&& 7<3( $&&(37$1&(
$OZD\V 'LVFRQQHFW 7KH /LQH 9ROWDJH %HIRUH 6HUYLFLQJ 6RPH 3DUWV 0D\ 6WLOO +ROG &XUUHQW :KHQ 8QSOXJJHG
:DUQLQJ
7+,6 (48,30(17 *(1(5$7(6 86(6 $1' &$1 5$',$7( 5$',2 )5(48(1&< (1(5*< $1' ,) 127 ,167$//('
$1' 86(' ,1 $&&25'$1&( :,7+ 7+( ,16758&7,216 0$18$/ 0$< &$86( ,17(5)(5(1&( 72 5$',2
&20081,&$7,216 ,7 +$6 %((1 7(67(' $1' )281' 72 &203/< :,7+ 7+( /,0,76 )25 $ &/$66 $ &20387,1*
'(9,&( 38568$17 72 68%3$57 - 2) 3$57 2) )&& 58/(6 :+,&+ $5( '(6,*1(' 72 3529,'( 5($621$%/(
3527(&7,21 $*$,167 68&+ ,17(5)(5(1&( :+(1 23(5$7(' ,1 $ &200(5&,$/ (19,5210(17 23(5$7,21 2)
7+,6 (48,30(17 ,1 $ 5(6,'(17,$/ $5($ ,6 /,.(/< 72 &$86( ,17(5)(5(1&( ,1 :+,&+ &$6( 7+( 86(5 $7 +,6
2:1 (;3(16( :,// %( 5(48,5(' 72 7$.( :+$7(9(5 0($685(6 0$< %( 5(48,5(' 72 &255(&7 7+(
,17(5)(5(1&(
5) ,17(5)(5(1&( 127,&( &$%/( +$51(66 3/$&(0(176 $1' *5281' 675$3 5287,1* 21 7+,6 *$0( +$9(
%((1 '(6,*1(' 72 .((3 5) 5$',$7,21 $1' &21'8&7,21 :,7+,1 /(9(/6 $&&(37(' %< 7+( )&& 58/(6 72
0$,17$,1 7+(6( /(9(/6 5(326,7,21 +$51(66(6 $1' 5(&211(&7 *5281' 675$36 72 7+(,5 25,*,1$/
3/$&(0(176 ,) 7+(< %(&20( ',6&211(&7(' '85,1* 0$,17(1$1&(
1RWLF HV
7+,6 '2&80(17 $1' 7+( '$7$ ',6&/26(' +(5(,1 25 +(5(:,7+ ,6 127 72 %( 5(352'8&(' (;&(37 :+(5(
127(' 86(' 25 27+(5:,6(
,1 :+2/( 25 ,1 3$57 72 $1<21( :,7+287 :5,77(1 &216(17 2)
:$5
$511,1',6&/26('
*
67(51Š 3,1%$// ,1&
352'8&76 ,1 7+,6 0$18$/ 7+( &203$1< 1$0( $1' '(9,&(6 $1' 7+(
'(6,*1 2) 7+( 0$18$/ ,76(/) $5( 3527(&7(' %< )('(5$/ 3$7(176 $1' 3$7(176 3(1',1* '(6,*1
5(*,675$7,216 75$'(0$5.6 $1' &23<5,*+76 $&7,21 :,// %( 7$.(1 ,1 7+( (9(17 2) ,1)5,1*(0(17 25
,0,7$7,21 7+( 5,*+7 ,6 5(6(59(' 72 &+$1*( 63(&,),&$7,216 :,7+287 35,25 127,&(
&RS\ULJKW ‹ %(7$%5,7( DQG
‹ 0DQXIDFWXUHG E\ 6WHUQŠ 3LQEDOO ,QF 3RUWDOV
ORJR DUH WUDGHPDUNV RI $GDSWLYH 0LFUR
,FRQ 'HVLJQV 7R36• /RJR %XPS 1· :LQ• /RJR DOO
6\VWHPV ,QF UHJLVWHUHG LQ WKH 8QLWHG
UHODWHG LQGLFLD DUH WUDGHPDUNV RI 6WHUQŠ 3LQEDOO ,QF
6WDWHV 3DWHQW DQG 7UDGHPDUN 2IILFH
$OO 5LJKWV 5HVHUYHG 0DGH LQ WKH 86$
$OO 5LJKWV 5HVHUYHG
0XOWLEDOO LV D UHJLVWHUHG WUDGHPDUN RI
:LOOLDPV (OHFWURQLFV *DPHV ,QF 8VHG E\ SHUPLVVLRQ
'HVLJQHG E\ 6WHYH
3&% 6FKHPDWLFV 6HFWLRQ &KDSWHU E\ &(6
5LWFKLH 3URGXFWLRQV
&UHDWLYH (OHFWURQLFV 6RIWZDUH ,QF ‹ 5HJ 86 3DW # 70 2IILFH ‹ (3( (OYLVŠ
,Q 6:,7&+ 0(18
DOVR VHOHFW
$&7,9( DQG
'(',&$7('
6:,7&+ 7(676
6:,7&+0$75,;*5,''(',&$7('6:,7&+(6(for notes & locations, see Page DR. 4 or 17)
&ROXPQ
'ULYH
5RZ
5HWXUQ
1:
U400
1:
Q1
Q2
2:
Cabinet Side
1
9
LT
BUTTON
(UK ONLY)
Below P/F
515-5162-08
10 Above P/F
WHT-RED
CN7-P8
4TH
COIN SLOT
SHOOTER
LANE
EXIT
180-5204-00
Coin Door
180-5190-28
11 Below P/F
6TH
COIN SLOT
4-BALL
TROUGH
#1 (LEFT)
Sw. Part Number:
4:
U400
WHT-YEL
CN7-P6
Sw. Part Number:
5:
U401
Future Use
Coin Door
4
WHT-BLU
CN7-P3
Sw. Part Number:
7:
U401
WHT-VIO
CN7-P2
Sw. Part Number:
8:
U401
180-5158-00
19 Below P/F
180-5119-02
12 Below P/F
RIGHT
COIN SLOT
180-5204-00
Coin Door
180-5119-02
13 Below P/F
CENTER
WHT-GRN COIN
SLOT /
CN7-P5
DBA
Sw. Part Number:
6:
U401
5:
Q5
Q6
6:
4-BALL
TROUGH
#3
Below P/F
57
SPINNER
180-5189-00
34 Below P/F
500-6227-02
42 Below P/F
180-5015-05
50 Below P/F
500-6227-02
58 Below P/F
LEFT
ORBIT
HI
CENTER
SAUCER
EJECT
MIDDLE
TOP
LANE
RIGHT
BUMPER
LEFT
RETURN
LANE
500-6227-02
43 Below P/F
180-5015-05
51 Below P/F
500-6227-02
59 Below P/F
RIGHT
TOP
LANE
BOTTOM
BUMPER
LEFT
SLINGSHOT
180-5186-00
35
INNER
LOOP
NOT
USED
36
RIGHT
RAMP
EXIT
Below P/F
500-6227-02
44
180-5015-05
Mini P/F
52
NOT
USED
TOP
HOTEL
STANDUP
( K )ING
NOT
USED
K( I )NG
RIGHT
RAMP
MADE
BOTTOM
HOTEL
STANDUP
RIGHT
RETURN
LANE
Above P/F
515-7381-00
38 Below P/F
180-5190-28
46 Above P/F
515-5162-08
54 In Cabinet
500-6227-02
62 Below P/F
KI( N )G
RIGHT
ORBIT
LOW
START
BUTTON
RIGHT
SLINGSHOT
Above P/F
515-5162-08
Mini P/F
53
500-6227-02
61 Below P/F
GRY-GRN
CN6-P7
( T )CB
180-5204-00
Coin Door
See Sw. 14 Note
15 Below P/F
515-5162-08
23 Below P/F
180-5087-00
31 Above P/F
515-7381-00
39 Below P/F
180-5087-00
47 Above P/F
180-5174-00
55 In Cabinet
180-5054-00 (x2)
63 Above P/F
5TH
COIN SLOT
4-BALL
STACKING
OPTO
T( C )B
LEFT
RAMP
EXIT
KIN( G )
RIGHT
ORBIT
HI
TOURNAMENT
START
HOTEL
DOOR
515-5162-08
24 Below P/F
180-5010-01
32 Below P/F
515-7381-00
40 Below P/F
180-5087-00
48 Above P/F
180-5174-00
56 In Cabinet
180-5119-02
64 Above P/F
SHOOTER
LANE
TC( B )
TOP
SAUCER
EJECT
SCARF
STANDUP
HOTEL
POST
PLUMB
BOB
TILT
HOUND
DOG
180-5157-00
515-5162-08
180-5186-00
515-5967-02
180-5189-00
See Sw. 56 Note
180-5190-28
RT
BUTTON
(UK ONLY)
WHT-GRY
CN7-P1
Sw. Part Number:
180-5160-00
#4 RIGHT
FLIPPER E.O.S.
(End-of-Stroke)
Sw. Part Number: 180-5149-00 on Flipper
5:
U206 DS-5 on Cabinet Side
LEFT
COIN SLOT
Future Use
See Sw. 15 Note
Cabinet Side 16 Below P/F
Sw. Part Number: 180-5164-00 Doubled
4:
U206 DS-4 Below Playfield
GRY-YEL
CN6-P6
LEFT
RAMP
MADE
8
#3 RIGHT
FLIPPER
BUTTON
GRY-ORG
CN6-P4
4-BALL
TROUGH
VUK OPTO
7
#2 LEFT
FLIPPER E.O.S
(End-of-Stroke)
Sw. Part Number: 180-5149-00 on Flipper
3:
U206 DS-3 on Cabinet Side
180-5119-02
14 Below P/F
30
U206 DS-1 on Cabinet Side
#1 LEFT
FLIPPER
BUTTON
GRY-RED
CN6-P3
180-5204-00
Coin Door
6
BLK
CN6-P1, -P11
Sw. Part Number:
180-5160-00
2:
U206 DS-2 Below Playfield
RIGHT
OUTLANE
515-7381-00
37 Below P/F
45
1:
GROUND
GRY-BRN
CN6-P2
180-5054-00 (x2)
60 Below P/F
180-5010-01
29
D
O
TS
180-5158-00
22 Below P/F
Below P/F
49
180-5010-04
26 Above P/F
D
O
TS
ELVI( S )
Below P/F
LEFT
OUTLANE
180-5087-00
28 Above P/F
180-5158-00
21 Below P/F
41
GRN-GRY
CN5-P9
LEFT
BUMPER
D
O
TS
ELV( I )S
Below P/F
GRN-VIO
CN5-P8
*5281'
,&
8
,13876
Q8
8:
LEFT
TOP
LANE
180-5087-00
27 Above P/F
180-5158-00
20 Below P/F
33
Q7
7:
ELVIS
HOME
D
O
TS
EL( V )IS
4-BALL
TROUGH
#2
5
180-5158-00
18 Below P/F
E( L )VIS
Above P/F
25
D
O
TS
( E )LVIS
180-5160-00
Coin Door
2
3
Below P/F
17
SPOT
NOTE
STANDUP
Sw. Part Number:
2:
U400
WHT-ORG
CN7-P7
Q4
4:
GRN-BRN GRN-RED GRN-ORG GRN-YEL GRN-BLK GRN-BLU
CN5-P1
CN5-P3
CN5-P4
CN5-P5
CN5-P6
CN5-P7
WHT-BRN
CN7-P9
Sw. Part Number:
3:
U400
Q3
3:
#5 UPPER RT.
FLIPPER
BUTTON
Sw. Part Number: 180-5164-00 Doubled
6:
U206 DS-6 on Coin Door
#6 VOLUME
(RED BUTTON)
(In Test: LEFT)
GRY-BLU
CN6-P8
Sw. Part Number:
180-5192-02
7:
U206 DS-7 on Coin Door
#7 SERV. CRED.
(GREEN BUTTON)
(In Test: RIGHT)
GRY-VIO
CN6-P9
Sw. Part Number:
180-5192-04
8:
U206 DS-8 on Coin Door
GRY-BLK
CN6-P10
#8 BEGIN TEST
(BLACK BUTTON)
(In Test: ENTER)
Sw. Part Number:
180-5192-00
,Q /$03 0(18
DOVR VHOHFW
7(67 $// /$036
52: &2/801
/$03 7(676
&ROXPQ
Y
5RZ
*URXQG
1:
Q33
/$030$75,;*5,'(for notes & locations, see Page DR. 5 or 23)
1:
Q34
ROCK
AGAIN
Q35
HOUND
DOG
Q36
10
5:
Q37
6:
Q38
5
33
Q39
RED-VIO
J12-P8
8:
Q40
Q41
Q42
RED
J12-P11
5:
U13
YEL-GRN
J13-P5
6:
U12
YEL-BLU
J13-P4
7:
U11
YEL-VIO
J13-P3
8:
U10
YEL-GRY
J13-P1
LEFT
OUTLANE
LEFT
RETURN LANE
RIGHT
RETURN LANE
RIGHT
OUTLANE
SPOT
NOTE
SCARF
( T )CB
BLUE
SUEDE SHOES
HEARTBREAK
HOTEL
JAILHOUSE
ROCK
ALL
SHOOK UP
HITS
COMPLETED
ELVIS
COLLECTED
TOP 10
COMPLETED
9
8
7
LEFT RAMP
ARROW
6
SHOOK
LEFT
RAMP NOTE
4
3
2
1
RIGHT RAMP
ARROW
UP
RIGHT
RAMP NOTE
#44 Clear Bulb 34 #44 Clear Bulb 35 #44 Clear Bulb 36 #44 Clear Bulb 37 #44 Clear Bulb 38 #44 Clear Bulb 39 #555 Clear Bulb 40 #555 Clear Bulb
LEFT ORBIT
ARROW
L. ORBIT BLUE
SUEDE SHOES
LEFT
ORBIT NOTE
ALL
RIGHT ORBIT
ARROW
GIFT
FROM ELVIS
RIGHT
ORBIT NOTE
#44 Clear Bulb 46 #44 Clear Bulb 47 #44 Clear Bulb 48 #44 Clear Bulb
( K )ING
K( I )NG
KI( N )G
KIN( G )
49 #555 Clear Bulb 50 #555 Clear Bulb 51 #555 Clear Bulb 52 #555 Clear Bulb 53 #555 Clear Bulb 54 #555 Clear Bulb 55 #555 Clear Bulb 56 #555 Clear Bulb
HOUND
DOG
CENTER LOOP
ARROW
C. LOOP BLUE
SUEDE SHOES
57 #555 Clear Bulb 58 #555 Clear Bulb 59 #555 Clear Bulb 60
LEFT
TOP LANE
MIDDLE
TOP LANE
RIGHT
TOP LANE
CENTER
LOOP NOTE
LOCK
VIDEO
MODE
73
GOLD
RECORD
KING OF
ROCK N ROLL
JACKPOT
SUPER
JACKPOT
#44 Clear Bulb 61 #44 Clear Bulb 62 #44 Clear Bulb 63 #555 Clear Bulb 64 #555 Clear Bulb
HEART
BREAK
LITE
EXTRA BALL
ENCORE
LETTER
T( C )B
HOTEL
65 #44 Yellow Bulb 66 #44 Yellow Bulb 67 #44 Yellow Bulb 68 #44 Yellow Bulb 69 #44 Yellow Bulb 70
RED-WHT
J12-P10
10:
U14
41 #555 Clear Bulb 42 #555 Clear Bulb 43 #555 Clear Bulb 44 #555 Clear Bulb 45
RED-GRY
J12-P9
9:
4:
YEL-BLK
J13-P6
( E )LVIS E( L )VIS EL( V )IS ELV( I )S ELVI ( S )
RED-BLU
J12-P6
7:
U15
25 #555 Clear Bulb 26 #555 Clear Bulb 27 #555 Clear Bulb 28 #555 Clear Bulb 29 #555 Clear Bulb 30 #555 Clear Bulb 31 #555 Clear Bulb 32 #555 Clear Bulb
RED-YEL
J12-P4
RED-GRN
J12-P5
3:
YEL-ORG
J13-P7
17 #555 Clear Bulb 18 #555 Clear Bulb 19 #555 Clear Bulb 20 #555 Clear Bulb 21 #555 Clear Bulb 22 #555 Clear Bulb 23 #555 Clear Bulb 24 #555 Clear Bulb
RED-ORG
J12-P3
4:
U16
#555 Clear Bulb 10 #555 Clear Bulb 11 #555 Clear Bulb 12 #555 Clear Bulb 13 #555 Clear Bulb 14 #555 Clear Bulb 15 #555 Clear Bulb 16 #555 Clear Bulb
9
RED-BLK
J12-P2
3:
2:
YEL-RED
J13-P8
#555 Clear Bulb 2 #555 Clear Bulb 3 #555 Clear Bulb 4 #555 Clear Bulb 5 #555 Clear Bulb 6 #555 Clear Bulb 7 #555 Clear Bulb 8 #555 Clear Bulb
1
RED-BRN
J12-P1
2:
U17
YEL-BRN
J13-P9
#44 Blue Bulb
GRACELAND
71
#44 Red Bulb
SPECIAL
TC( B )
72 #44 Amber Bulb
EXTRA
BALL
#44 Clear Bulb 74 #44 Clear Bulb 75 #44 Clear Bulb 76 #44 Clear Bulb 77 #44 Clear Bulb 78 #44 Clear Bulb 79 #555 Clear Bulb 80 #555 Clear Bulb
( E )NCORE E( N )CORE EN( C )ORE ENC( O )RE ENCO( R )E ENCOR( E )
TOURNAMENT
BUTTON
START
BUTTON
3/4”
Ä
1” = 2.54cm /25.4mm
1cm = .3937”
1mm = .03937”
5
· For metric, multiply inch
value by metric value,
e.g. 5” X 2.54cm =
12.7cm or 127mm.
· For US, multiply metric
value by inch value,
e.g. 13cm X .3937” =
5.1181”
6
http://www.SternPinball.com
7
Visit our website for Pinball game information, Technical Support &
Part Sales (for Service Bulletins and a whole lot more!), Stern
News, Pinball Links and Distributor Listings. HELP US, HELP YOU!
If you have any suggestions, questions, need technical advice, find
errors or have comments, contact us through our website or call!
This Game Service Manual and all other documents relating to this product, playfield components, features, rules, programming
and operation are subject to change without notice (Service Bulletins, if applicable, available through our website).
[email protected]
708-345-7889
à Á
4
1/32”
(.03125”)
1/2”
.75”
.25”
1/4”
.5”
.125”
.0625”
1/8”
(Option 1) Fax
3
1/16”
8
Tel
9
708-345-7700
Ä
2
Metric
Conversion
eMail
1-800-KICKERS
Â
1
Æ
THIS PINBALL GAME IS
TOURNAMENT PINBALL SYSTEM READY!
Æ
q U.S. q
Customary
Inch Ruler
Games shipped factory direct
to Europe from Stern Pinball,
Inc. are CE approved and will
have an "E" prefix attached to
t h e S e r i a l N u m b e r.
2020 Janice Avenue, Melrose Park, IL 60160
780-5084-00
">