PowerVerter® APS 700W High-Frequency Ultra-Compact Inverter/Charger with Auto-Transfer Switching and 1 C19 Outlet Highlights 12V DC or 230V AC input; 230V AC output; 1 outlet 700 watts continuous, 1050 watts OverPower and 1400 watts MODEL NUMBER: APSX700HF DoubleBoost inverter output 10 amp rated, 3-stage, built-in battery charger with 1/2 cycle transfer time Auto Transfer Switching option for battery backup / UPS operation - with AC surge suppression Ultra-compact, lightweight aluminum housing weighs only 4.5 lbs. / 2.0 kg Package Includes APSX700HF Owner's Manual with warranty Description information Tripp Lite's APSX700HF Ultra-Compact DC-to-AC inverter with automatic line-to-battery transfer and integrated charging system serves as an extended run UPS, a standalone power source or an automotive inverter. Supplies up to 700 watts of continuous 230V AC power to 1 AC outlet from any 12V battery or automotive DC source. OverPower inverter output feature provides up to 150% of the continuous output for up to 1.5 seconds, and DoubleBoost inverter output feature delivers up to 200% of the continuous output for up to 1.1 seconds, providing the extra power needed to cold start heavy-duty tools and motorized equipment. When AC cable is connected to a live wall socket, commercial power passes through to connected equipment and the battery set is recharged via 3-stage, 10-amp charging system. In UPS mode, the APS system responds to blackouts and voltage fluctuations with an automatic 11 millisecond transfer to battery-derived AC output. Includes a set of high current DC input terminals for simple hardwire installation (user supplies batteries and cabling - see owner's manual for recommendations). Passes sine wave utility or generator power during battery charging and UPS line power mode, plus efficient PWM sine wave AC output in inverter and UPS backup modes. Supports an unlimited amount of runtime with any number of user-supplied batteries connected. Features APSX700HF serves as an automotive or stationary DC-to-AC inverter with automatic line-to-battery transfer and integrated battery charger Supports 230V AC output from a 230V AC line power source or 12V DC battery source Automatic transfer switching between line and battery power supports UPS protection during blackouts and voltage fluctuations for equipment compatible with a two cycle transfer time 700 watts continuous AC output in inverter mode, 840 watts continuous AC output in AC mode Double Boost inverter output supports momentary startup loads up to 200% of the continuous rating for durations up to 1.1 seconds OverPower inverter output supports longer duration overloads to 150% for up to 1.5 seconds in duration under ideal battery and temperature conditions. 3 stage, 10 amp battery charger with adjustable settings for wet/gel battery types offers fast, reliable battery recharging Protected hardwire bolt-down input lugs safely accept heavy gauge input wiring from attached battery bank IEC 320 C13 output receptacle passes 230V line power or inverter output through to connected equipment Ultra-compact, lightweight aluminum housing with secure mounting flanges weighs only 4.5 lbs./ 2.0 kg Moisture-resistant construction enables vehicular or marine operation in high humidity environments 1/4 3 position operating mode switch supports "AUTO" mode to enable automatic transfer between DC and AC modes, CHARGE-ONLY to maintain a full battery charge when AC is present without auto transfer and SYSTEM OFF settings. Set of six front panel LEDs display AC/DC operational modes, overload status, DC voltage level, shutdown status and system fault status Adjustable brownout response enables user configuration of automatic transfer to battery mode from 163 to 201V AC Grounding lug properly connects the inverter/charger system to earth ground or vehicle grounding system Automatic overload and thermal shutoff safely turns off inverter as excessive loads or overheating conditions develop Specifications OUTPUT Frequency Compatibility 50 Hz Output (Watts) 700 Continuous Output Capacity (Watts) 700 Peak Output Capacity (Watts) 1400 Output Nominal Voltage 230V Output Voltage Regulation LINE POWER (AC): Maintains 230V nominal sine wave output from line power source. INVERTER POWER (AC): Maintains PWM sine wave output voltage of 230V (+/- 5%) Output Frequency Regulation 50 Hz (+/- 0.3 Hz) Overload Protection Included 4A output breaker for AC output loads Outlet Details 1 IEC C13 on 6-inch dongle INPUT Nominal Input Voltage(s) Supported 230V AC Recommended Electrical Service DC INPUT: Requires 12V DC input source capable of delivering 72A for the required duration (when used at full continuous capacity - DC requirements increase during Over-Power" and Double-Boost" operation). AC INPUT: 10A 230V AC recommended Maximum Input Amps / Watts DC INPUT: Full continuous load - 72A at 12V DC. AC INPUT: 4.5 amps at 230VAC with full inverter and charger load (0.8A max charger-only) Input Connection Type DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: IEC 320 C14 input plug on 6 inch dongle Voltage Compatibility (VAC) 230 BATTERY Expandable Battery Runtime Runtime is expandable with any number of user supplied wet or gel type batteries DC System Voltage (VDC) 12 Battery Charge 10-Amp with 1/2 cycle transfer time USER INTERFACE, ALERTS & CONTROLS Front Panel LEDs 6 diagnostic LEDs indicate battery voltage level (high, medium & low) and operation (line, inverter, load) Switches 3 position DC off, auto (inverter or AC) and charge-only switch enables simple operation 2/4 SURGE / NOISE SUPPRESSION AC Suppression Joule Rating 430 PHYSICAL Shipping Dimensions (hwd / in.) 8.46 x 15.35 x 4.25 Shipping Dimensions (hwd / cm) 21.5 x 39 x 10.8 Shipping Weight (lbs.) 5.25 Shipping Weight (kg) 2.4 Unit Dimensions (hwd / in.) 5.45 x 12.72 x 2.77 Unit Dimensions (hwd / cm) 13.84 x 32.3 x 7 Unit Weight (lbs.) 4.47 Unit Weight (kg) 2.0 Cooling Method Multi-speed fan Material of Construction Extruded aluminum Form Factors Supported Integrated mounting feet for easy installation ENVIRONMENTAL Relative Humidity 0-95% non-condensing LINE / BATTERY TRANSFER Transfer Time (Line Power to Battery Mode) 12 milliseconds (AC to DC mode), 11 milliseconds (DC to AC mode) Low Voltage Transfer to Battery Power In AC "auto" mode, inverter/charger switches to battery mode as line voltage drops to 163V (user adjustable to 182, 201V - see manual) SPECIAL FEATURES TVSS Grounding Main ground lug for connecting inverter to vehicle or earth grounding system WARRANTY Product Warranty Period (U.S. & Canada) 1-year limited warranty Product Warranty Period (International) 2-year limited warranty Product Warranty Period (Mexico) 2-year limited warranty Product Warranty Period (Puerto Rico) 1-year limited warranty YES/NO WEB CATEGORY PAGE FILTERS 3/4 Remote Control Capability No © 2017 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies: https://www.tripplite.com/products/product-certification-agencies 4/4
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement
© 2021