Panasonic ET-PKF110S project mount Mounting instructions
Add to my manuals
1 Pages
Panasonic ET-PKF110S is a ceiling mount bracket custom-designed for low ceilings that enables versatile positioning of PT-FW430 series or other compatible Panasonic projectors. With vertical correction from +5° to -15°, horizontal slant correction of ±10°, and horizontal turn correction of ±5°, it ensures optimal projection angles. The bracket is made of durable materials and comes with all necessary hardware for a secure and stable installation.
advertisement
S P E C F I L E
Ceiling mount bracket for low ceilings
ETPKF110S
Description
This ceiling mount bracket is used when mounting a PT-FW430 series or other Panasonic projector to low ceilings.
Specifications Vertical correction angle:
Horizontal slant correction angle:
Horizontal turn correction angle:
Dimensions (W × H × D):
Weight:
+5°, -15°
±10°
±5°
313 × 93 × 222 mm
(12-5/16˝ × 3-21/32˝ × 8-3/4˝)
Approx. 1.5 kg* (3.3 lbs*)
* Average value. May differ depending on models.
Parts Attachment plate . . . . . . . . . . . . . . . . . . . . . . . . 1
Projector mount bracket . . . . . . . . . . . . . . . . . . . 1
Washer-fitted bolts (M4 × 10) . . . . . . . . . . . . . . . 4
Wire rope for projector mount bracket . . . . . . . . 1
Wire rope for projector unit . . . . . . . . . . . . . . . . 1
C a u t i o n :
• Mounting should be done by a qualified technician.
• Make sure that the mounting (ceiling) area has sufficient strength.
• Read the enclosed mounting instructions thoroughly before starting.
• Do not use an electric screwdriver or impact driver to tighten screws. Use a torque driver or hexagon torque wrench and tighten screws to the torque specified in the instructions.
• When the product is no longer going to be used, have it disposed of quickly by a professional disposal service.
Dimensions
Illustration shows the bracket attached to a projector.
°
10
9.5 ( 3 / 8 )
13 (1/2)*
432
(17)
* From center of rotation to center of lens
Attachement plate
184
(7-1/4
65 ( 2-9 /16 )
Projector
Attachment plate
∅ 8.5
( ∅ 11/32)
3∅ 9.5 ( ∅ 3 / 8 )
104 (4-3 /32)
130 ( 5-1/ 8 )
150 ( 5-29 /32)
Weights and dimensions shown are approximate. Specifications subject to change without notice.
As of March 2011
SFL11A004 unit : mm (inch)
NOTE: This illustration is not drawn to scale.
1 / 1
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement