Commercial Products - Western Sales Company

Commercial Products - Western Sales Company
Commercial Products
The world has changed.
Pretty is no longer enough.
Standard is no longer enough.
The world wants more.
I want more.
PERFORMANCE WITH PURPOSE.
DESIGN WITH A CONSCIENCE.
I N N O VAT I O N W I T H A H E A R T.
Q UA L I T Y YO U C A N F E E L .
Today, most bath products do their job
pretty well. But just showing up for work
isn’t enough anymore. You want fixtures
that save money and water without
sacrificing an ounce of performance.
And the peace of mind that comes from
knowing you bought a brand that sets the
standards for world-class performance,
enduring quality and reliability. And, of
course, you want fixtures that can do it all
with effortless beauty. That’s what TOTO
is really all about – connecting you with
water in ways that enrich the flow of your
everyday life. It’s our passion. It’s our
mission. And it’s pure TOTO.
QUALITY
ENDURING QUALITY
All TOTO products pass multiple performance tests to ensure quality, reliability and
customer satisfaction. But what really matters is knowing that you’ll feel just as good about
your decision to buy TOTO next year, and the years after, as you do today.
WORLD-CLASS PERFORMANCE
With more “firsts” than anyone else, TOTO leads the world in innovating products that simply
PERFORMANCE
perform better. That means peace of mind, knowing that your TOTO fixtures will perform at
the highest level, day in and day out, year after year, and look beautiful doing it.
DESIGN
ENLIGHTENED DESIGN
TOTO showers, toilets and faucets can save 20-63% on water usage bills. You use less
water and save money without losing an ounce of performance. And TOTO is the only
plumbing manufacturer to receive the EPA’s Water Efficiency Leader Award.
R E A L H U M A N VA L U E
VALUE
The day you install TOTO is the day you start saving with TOTO. Because with every use,
you save money and water, while gaining
ning
ng something of real human value – the confidence
conf
duct
ct for all the right reasons.
reasons
that comes with buying the right product
The Single Source For All Your Restroom Products
The TOTO commercial line of toilets, urinals, sinks, EcoPower faucets and flush valves and hand dryers
provide you with a single source to spec a full line of products. And single source specification means
single source responsibility.
TOILETS
URINALS
FLUSH
VALVES
HAND
DRYERS
SINKS
In today’s fast paced world, the need for superior
performance and reliability means everything. And when
it comes to busy commercial buildings, TOTO products
are the only choice. We design world-class, eco-friendly
plumbing products that help you save water and money
without sacrificing an ounce of performance.
How do we do it? Our plumbing fixtures and fittings are
made with superior parts and go through rigorous testing
to ensure unmatched performance, true water-savings
and complete customer satisfaction. Faucets and flush
valves that are powered by the sheer force of moving
SENSOR
FAUCETS
water eliminate the need for routine battery replacement
and constant maintenance. High Efficiency Toilets and
Urinals (HETs and HEUs) that work seamlessly together
with TOTO flush valves to provide considerable water
and energy savings.
A fixture that performs better, lasts longer and requires
less time, money and effort. That’s the TOTO goal……
to deliver real-world performance, reliability and
complete peace of mind.
Flushing Technology
TOTO’s rigorous flushing performance testing methods go beyond compliance and beyond industry
standards, ensuring outstanding one-flush performance and true water savings.
TOTO practically invented high-efficiency flushing
systems, and we have always stressed how important it
is to offer a balanced system. Many competitors simply
change a fill valve or trapway size to reduce water flow,
leaving you the option to flush again--or deal with the
dirty consequences.
At TOTO, the toilet design, flushing mechanisms, water
motion, glazing method and even the way that water
moves are all taken into account. Our engineers optimize
each flushing system to find the best balance of all
components for better performance, improved reliability
and ultimately, your complete satisfaction with one of the
most important products in the home.
Reduced
Maintenance
Improved
Reliability
Superior
Performance
EFVs use the flow
of the water to power
the entire system...
and when paired with a
TOTO high-efficiency
commercial toilet or urinal...
Eco-friendly, superior performing flushing is easy to
achieve with TOTO’s 1.28 GPF high-efficiency commercial
toilets and urinals. When combined with flushometer
valves, our HEUs use an average of 0.5 GPF and the
equals a balanced system that
cannot be matched by combining
different toilets and flush valves.
commercial HETs can use as little as 1.28 GPF. Enjoy
tremendous water savings without the maintenance
and sanitary drawbacks that can be associated with
waterless urinals.
SanaGloss
Developed with one simple purpose: to stay cleaner longer. Penetrating glaze—not surface coating—
and ionic chemistry team to preserve and protect. For A low-maintenance lifetime.
• Exclusive, advanced ceramic glaze maintains suberb cleanliness
• Offers a high-gloss appearance
• Helps prevent staining, scaling, rust, and lime buildup
• Seals the fixture, creating a super smooth surface to which particles will not easily cling
• Forms a catalyzed ionic barrier that actually repels particles
• Reduces the growth of bacteria and mold
Without SanaGloss
Ceramic is porous. Microscopically, it’s full of tiny
imperfections. Bacteria and particles can settle on
the surface of ceramic, which can lead to stains and
unsanitary conditions. SanaGloss’ super smooth surface
barrier is actually baked into our ceramic glaze—not
simply applied to the surface, like some less permanent
With SanaGloss
competitive products—making it an integrated,
inseparable part of our toilets and lavatories. Simply,
it seals the surface, forming a catalyzed, positive
ionic barrier that actually repels particles. Meaning
stains don’t stick around, and your bathrooms stay
positively brilliant.
EcoPower® Technology
Engineered to require no electricity or routine battery replacement, EcoPower technology is the
perfect marriage of hands-free operation, low maintenance, easy installation and ecology.
Found only in TOTO sensor faucets and flush valves,
EcoPower products are powered by water, a truly
sustainable form of energy. No changing batteries that
end up in landfills and no downtime required to install
power supplies and wiring. Automatic water shut-off
functionality in the faucets and the self cleaning 360°
debris screen in the flush valves reduce maintenance
costs for common problems such as continuous running,
flooding and water waste.
EcoPower technology saves energy and provides
maximum performance in even the most demanding,
high-traffic commercial spaces, making TOTO EcoPower
faucets and flush valves a perfect conservation solution
or LEED option.
EcoPower Faucet
Sensor eye in spout ensures
consistent performance
Micro turbine that creates
self generating power
Solenoid with self-cleaning
diaphragm
Electronic circuit with
capacitors, power
storage units
Back-up battery
Stainless steel debris screen at
the supply bracket
The EcoPower self-generating
hydropower system actually
gets stronger with each use,
adding years to its lifecycle.
EcoPower Flush Valve
Sensor eye
Back-up battery
Solenoid with selfcleaning diaphragm
Mechanical manual
override button
Electronic circuit with capacitors,
power storage units
Bronze
casting
Piston with accessible 360°
debris screen
Micro-Turbine that creates self
generating power
Sensor-operated TOTO soap dispensor
Designed to complement EcoPower sensor Faucets
• Automatic dispensing system
• Remote installation of soap reservoir and control box
• Self-adjusting “smart sensor”
• Economical pre-measured foaming soap
• ADA compliant
Optional five-gallon
reservoir available
Single soap reservoir
Feeds three spouts
SOAP COS T IN $
80
With it’s pre-measured soap
70
60
50
release, the TOTO soap
dispensor cost less to operate
than other soap systems.
40
Major Competitors’
Electronic Dispenser Soap
Common Antibacterial
Manual Pump Soap
TOTO SOAP
Clean Dry Hand Dryers
TOTO’s Clean Dry hand dryers are ADA-compliant and offer high-speed air for an effective, economical
solution. Infrared sensor-operated, Clean Dry offers innovative air wicking
technology that completely dries the user’s hands in under 12 seconds.
This performance reduces energy use by 25% over
traditional electronic hand dryers that sometimes fail
to dry hands completely. Further, Clean Dry dryers are
extremely quiet during operation with a low decibel
rating between 58-62 dB.
Clean Dry also features washable filters that may be
reused and help keep the room’s air fresh. Drain trays
collect the water dripping from hands to prevent
watermarks or slick spots on the floor, and the products
also have special hardware to prevent vandals from
removing or damaging the units.
• ADA-compliant, high-speed hand dryer
• Hands-free, sensor-operated and hygienic
• Innovative, air wicking technology effectively dries in 5 - 7 seconds
• Uses 1/4 less energy than traditional electronic hand dryers
LEED Applicable Products
LEED is an internationally recognized green building certification system that provides third-party
verification for a building or communities. To get maximum LEED points, a new or existing building
must reach specified water-usage reduction percentages to earn LEED points. The more usage
reductions, the more LEED points are earned.* TOTO offers a full range of bathroom products that can
help professionals in the commercial industry earn LEED points toward certification:
1.28 HET
20% Reduction
0.5 HEV with Urinal
50% Reduction
1.5 HEF
32% Reduction
0.08 GPC
EcoPower Faucet
68% Reduction
* Refer to LEED certification system maintained by the United State Green Building Council (USGBC)
TOTO Demonstrates Leadership and Vision
TOTO plays a significant role in leading the sustainability charge in our industry. In fact, our active role in leading
policy and certification organizations demonstrates how we go beyond products or practices to help ensure
environmental responsibility across all company activities.
• TOTO USA is the only plumbing manufacturer to receive the EPA’s Water Efficiency Leader Award
• TOTO was the first plumbing products manufacturer to have employees become sustainability experts
by gaining LEED Accredited Professional status
• TOTO was the first major plumbing products manufacturer to join the United States
Green Building Council (USGBC)
EPA WaterSense
Partner
Green Building
Initiative
Water Efficiency
Leader Award
Environmental
Protection Agency
LEED AP
Argon Award
SPECIFICATION SHEETS
Churchill Downs
Louisville, Kentucky
Bridgepoint Health
Toronto, Ontario
Metropolitan Museum of Art
New York, New York
Google Headquarters
Mountainview, California
CT705EN(G)
Flushometer Toilet, 1.28GPF when used with
High Efficiency Flushometer Valve
FEATURES
• Floor-mounted
• Elongated front bowl
• Optional SanaGloss® ceramic glaze - SanaGloss
glaze prevents debris, mold and bacteria from
sticking to ceramic surfaces, leading to fewer
chemicals and less water in cleaning.
•
10"-12" rough-in
MODELS
• CT705ENG
Commercial floor-mounted toilet with SanaGloss
ceramic glaze
•
CT705EN
Commercial floor-mounted toilet
ADDITIONAL ITEMS (sold separately)
• SC534 seat
• SC134 seat
FLUSH VALVES
Manual
EcoPower
®
TET1LN32#CP
1.28GPF
TMT1LN32#CP
1.28GPF
TMT1NNC-32
1.6GPF
TET1GNC-32
1.6GPF
TET6LN32#CP
1.28GPF
TET6GNC-32
1.6GPF
TET3LN32#SS
1.28GPF
TET3GN32#SS
1.6GPF
TET2GN32#SS
1.6GPF
TET2LN32#SS
1.28GPF
COLORS/FINISHES
• Standard
#01 Cotton
#03 Bone (not available in SanaGloss)
#12 Sedona Beige (not available in SanaGloss)
PRODUCT SPECIFICATION
The floor-mounted, low consumption siphon jet
flushing toilet shall be 1.28GPF/4.8LPF when paired
with a 1.28GPF flushometer valve and 1.6GPF/6.0LPF
when paired with 1.6GPF/6.0LPF flushometer valve.
Toilet shall be elongated front bowl and SanaGloss
ceramic glaze (CT705ENG). Toilet shall be TOTO
Model CT705E______.
CODES/STANDARDS
•
•
•
•
Meets and exceeds ASME A112.19.2/CSA B45.1,
ASME A112.19.14
Certifications: IAPMO (cUPC), State of Massachusetts,
City of Los Angeles, and others
Code compliance: UPC, IPC, NSPC, NPC Canada,
and others
Legislative compliance: California AB715, California
Green Building Code, City of Los Angeles Water
Efficiency Ordinance
CT705EN(G)
Flushometer Toilet, 1.28GPF when used with
High Efficiency 1.28GPF Flushometer Valve)
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
•
•
INSTALLATION NOTES
Water Use
1.28GPF/4.8LPF
(or 1.6GPF/6.0LPF when
used with 1.6GPF flush
valve)
Flush System
Siphon jet flushing action
Min. Water Pressure 35 psi (flowing)
Min. Flow Rate
23 GPM
Water Surface
10-1/4" x 9-5/8"
Trap Diameter
1-7/8"
Rough-in
12", or 10"
Trap Seal
2-3/8"
Warranty
One Year Limited Warranty
Material
Vitreous china
Shipping Weight
CT705EN(G) - 52.5lbs
Shipping Dimensions CT705EN(G)
26-1/2"L x 9-1/2" W1 x 161/4"W2 x 17"H
with 12" rough-in
with 10" rough-in
25-1/4" (642mm)
25-1/4" (642mm)
14-3/8"
(365mm)
5-1/2"
(140mm)
18-1/2" (470mm)
26-1/8" (663mm)
3"
(76mm)
14-3/8"
(365mm)
5-1/2"
(140mm)
1" (25.4mm)
I.P.S.
18-1/2" (470mm)
28-1/8" (714mm)
5"
(127mm)
1-1/2" (38mm)
I.P.S.
15"
(380mm)
10"
(254mm)
4-3/4"
(121mm)
14-3/8"
(365mm)
1-1/2" (38mm)
I.P.S.
26-1/2"
(673mm)
15"
(380mm)
12"
(305mm)
9-1/8"
(232mm)
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
# SS-00452 v.06
Printed in U.S.A. | © TOTO USA 06/09 | Printed on recycled paper ƛ
CT705ELN(G)
Flushometer ADA Toilet, 1.28GPF when used with
High Efficiency Flushometer Valve
FEATURES
• Floor-mounted
• ADA compliant
• Elongated front bowl
• Optional SanaGloss® ceramic glaze - SanaGloss
glaze prevents debris, mold and bacteria from
sticking to ceramic surfaces, leading to fewer
chemicals and less water in cleaning.
•
10"-12" rough-in
MODELS
• CT705ELNG
Commercial ADA compliant, floor-mounted toilet
with SanaGloss ceramic glaze
•
CT705ELN
Commercial ADA compliant floor-mounted toilet
ADDITIONAL ITEMS (sold separately)
• SC534 seat
• SC134 seat
FLUSH VALVES
Manual
EcoPower
®
TET1LN32#CP
1.28GPF
TMT1LN32#CP
1.28GPF
TMT1NNC-32
1.6GPF
TET1GNC-32
1.6GPF
TET6LN32#CP
1.28GPF
TET6GNC-32
1.6GPF
TET3LN32#SS
1.28GPF
TET3GN32#SS
1.6GPF
TET2GN32#SS
1.6GPF
TET2LN32#SS
1.28GPF
CODES/STANDARDS
COLORS/FINISHES
•
• Standard
#01 Cotton
#03 Bone (not available in SanaGloss)
#12 Sedona Beige (not available in SanaGloss)
•
PRODUCT SPECIFICATION
The floor-mounted, ADA compliant, low consumption
siphon jet flushing toilet shall be 1.28GPF/4.8LPF
when paired with a 1.28GPF flushometer valve and
1.6GPF/6.0LPF when paired with 1.6GPF/6.0LPF
flushometer valve. Toilet shall be elongated front bowl
and SanaGloss ceramic glaze (CT705ELNG). Toilet
shall be TOTO Model CT705ELN______.
•
•
Meets and exceeds ASME A112.19.2/CSA B45.1,
ASME A112.19.14,
Certifications: IAPMO(cUPC), State of
Massachusetts , City of Los Angeles, and others
Code compliance: UPC, IPC, NSPC, NPC Canada,
and others
ADA compliant
CT705ELN(G)
Flushometer ADA Toilet, 1.28GPF when used
with High Efficiency 1.28GPF Flushometer Valve)
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
•
•
INSTALLATION NOTES
Water Use
1.28GPF/4.8LPF
(or 1.6GPF/6.0LPF when
used with 1.6GPF flush
valve)
Flush System
Siphon jet flushing action
Min. Water Pressure 35 psi (flowing)
Min. Flow Rate
23 GPM
Water Surface
10-3/4" x 9-1/4"
Trap Diameter
1-7/8"
Rough-in
12", or 10"
Trap Seal
2-3/8"
Warranty
One Year Limited Warranty
Material
Vitreous china
Shipping Weight
CT705ELN(G) - 56.5lbs
Shipping Dimensions CT705ELN(G)
26-1/2"L x 9-1/2" W1 x 161/4"W2 x 19-1/2"H
with 10" rough-in
5 -1/2"
(140mm)
with 12" rough-in
14 - 3/8" (365mm)
5 -1/2"
(140mm)
14 - 3/8" (365mm)
18 -1/2" (470mm)
18 -1/2" (470mm)
25-1/4" (642mm)
25-1/4" (642mm)
26-1/8" (663mm)
28-1/8" (714mm)
3" (76mm)
5"
(127mm)
1-1/2" I.P.S
*4 - 3/4" (121mm)
1" I.P.S
14 - 3/8" (365mm)
1-1/2" I.P.S
29"* (737mm)
17-1/2" (445mm)
10"
(254mm)
17-1/2" (445mm)
12"
(305mm)
9"
(230mm)
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
# SS-00453 v.05
Printed in U.S.A. | © TOTO USA 06/09 | Printed on recycled paper ƛ
CT708E(G) & CT708EV(G)
Wall-Mounted Flushometer Toilet, 1.28GPF when used with
High Efficiency Flushometer Valve
FEATURES
• Wall-mounted outlet
• Elongated front bowl
• Optional SanaGloss® ceramic glaze - SanaGloss
glaze prevents debris, and mold from sticking to
ceramic surfaces, leading to fewer chemicals and
less water in cleaning.
MODELS
• CT708E
Commercial wall-mounted toilet with 1-1/2' top
spud inlet, less seat
• CT708EG
Commercial wall-mounted toilet with 1-1/2' top
spud inlet, less seat with SanaGloss ceramic glaze
• CT708EV
Commercial wall-mounted toilet with 1-1/2' back
spud inlet, less seat
• CT708EVG
Commercial wall-mounted toilet with 1-1/2' back
spud inlet, less seat with SanaGloss ceramic glaze
• SC534 seat (sold separately)
• SC134 seat (sold separately)
• THU111 Retro-fit mounting bolt cap set (4 pcs sold
separately)
FLUSHOMETER VALVES (sold separately)
EcoPower®
1.28 GPF
1.6 GPF
1.28 GPF
1.6 GPF
TMT1LN32#CP
TMT1NNC-32
TET1LN32#CP
TET1GNC-32#CP
TET6LN32#CP
TET6GNC-32#CP
TET3LN#31#SS
TET3GN#31#SS
TET2LN#31#SS
TET2GN#31#SS
CT708EV
CT708E
Manual
COLORS/FINISHES
• #01 Cotton
#03 Bone
#12 Sedona Beige
CODES/STANDARDS
•
•
•
•
Meets and exceeds ASME A112.19.2/CSA B45.1
Certifications: IAPMO (cUPC), State of Massachusetts
, City of Los Angeles, and others
Code compliance: UPC, IPC, NSPC, NPC Canada,
and others
ADA Compliant
PRODUCT SPECIFICATION
The wall-mounted, low consumption siphon jet
flushing system toilet shall be 1.28GPF/4.8LPF
when paired with a 1.28GPF flushometer valve and
1.6GPF/6.0LPF when paired with 1.6GPF/6.0LPF
flushometer valve. Toilet shall have optional SanaGloss
ceramic glaze. Toilet can be mounted at ADA height.
Toilet shall be elongated front bowl. Toilet shall be
TOTO Model CT708E______.
CT708E(G) & CT708EV(G)
Wall-Mounted Flushometer Toilet, 1.28GPF when used
with High Efficiency 1.28GPF Flushometer Valve
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
•
Water Use
1.28GPF/4.8LPF
(or 1.6GPF/6.0LPF when
used with 1.6GPF flush
valve)
Flush System
Siphon jet flushing action
Min. Water Pressure 35 psi (flowing)
Min. Flow Rate
23 GPM
Water Surface
12" x 9-1/4"
Trap Diameter
2-1/8"
Trap Seal
2-5/8"
Warranty
One Year Limited Warranty
Material
Vitreous china
Shipping Weight
CT708E(G) - 49lbs
CT708EV(G) - 53.5lbs
Shipping Dimensions CT708E(G)
17-1/8"L x 16" W x 26"H
CT708EV(G)
15-1/2"L x 15-1/2" W x 26-3/8"H
Finished Wall (Must be flat surface)
18-1/2" (470mm)
CT708E(G)
*Suggested
Dimension
5 -1/2"
(140mm)
Note: If carrier bolt doesn’t extend/or is
flush with china, then use retrofit caps
THU111 (sold separately).
1-3/4"
(45mm)
Wall
Wall
Standard
bolt cap
1" N.P.T. supply for
Flushometer valve
*4-3/4"
(121mm)
Retrofit
bolt cap
China
2 -3/4"
(70mm)
1/16"
(1.7mm)
Wall
Gap
15-3/8" (390mm)
1-1/2"
(38mm)
24-7/8" (632mm)
*17"
(432mm)
*16"
(406mm)
*6-3/8"
(162mm)
China
11-1/2"
(292mm)
Proper Installation
2-3/8"
(59mm)
finished wall
7-1/2"
(190mm)
12-3/4"
(323mm)
Installation surface of bowl
has 1/16” wall gap
across entire surface.
Finished Floor
9"
(229mm)
Finished Wall (Must be flat surface)
18-1/2" (470mm)
CT708EV(G)
*Suggested
Dimension
Improper Installation
5 -1/2"
(140mm)
finished wall
Ø Uneven Wall Gap
1/16"
(1.7mm)
Wall
Gap
15-3/4"* (400mm)
24-7/8" (632mm)
3-1/2"
(90mm)
3-7/8"
(99mm)
2-3/8" (59mm)
*17"
(432mm)
11-1/4"
(285mm)
7-1/2" 12-3/4"
(190mm) (323mm)
*16"
(406mm)
*6-3/8"
(162mm)
Top and Bottom mounting
surfaces must be in
the same vertical plane.
Baseboard
Finished Floor
9"
(229mm)
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
# SS-00210 v.06
Printed in U.S.A. | © TOTO USA 05/10 | Printed on recycled paper ƛ
CT708H#01
Wall-Mounted, Bedpan Flushometer Toilet, 1.6GPF
FEATURES
• Wall-mounted
• Elongated front bowl
• Bed pan lugs
MODELS
• CT708H#01
Commercial wall-mounted toilet with 1-1/2' top
spud inlet, less seat
• SC534 seat (sold separately)
• SC134 seat (sold separately)
EXPOSED FLUSHOMETER VALVES (sold separately)
Manual
EcoPower®
TMT1NNC-32#CP
TET1GNC-32#CP
TET6GNC-32#CP
COLORS/FINISHES
• Standard
#01 Cotton
CODES/STANDARDS
•
•
PRODUCT SPECIFICATION
•
The wall-mounted, low consumption siphon jet
flushing system toilet shall be 1.6GPF/6.0LPF when
paired with a 1.6GPF flushometer valve. Toilet can be
mounted at ADA height. Toilet shall be elongated
front bowl and bedpan lugs. Toilet shall be TOTO
model CT708H#01.
•
Meets and exceeds ASME A112.19.2/CSA B45.1
Certifications: IAPMO (cUPC), State of Massachusetts,
City of Los Angeles, and others
Code compliance: UPC, IPC, NSPC, NPC Canada,
and others
ADA Compliant
CT708H
Wall-Mounted Flushometer Bedpan Toilet, 1.6GPF
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
Water Use
Flush System
Min. Water Pressure
Water Surface
Trap Diameter
Trap Seal
Warranty
Material
Shipping Weight
Shipping Dimensions
INSTALLATION NOTES
Note: If carrier bolt doesn’t extend/or is
flush with china, then use retrofit caps
THU111 (sold separately).
1-3/4"
(45mm)
1.6GPF/6.0LPF
Siphon jet flushing action
20 psi (static)
12" x 9-1/4"
2-1/8"
2-5/8"
One Year Limited Warranty
Vitreous china
CT708H - 49lbs
CT708H
16"L x 15-1/2" W x 26"H
Wall
Wall
Standard
bolt cap
Retrofit
bolt cap
China
China
Proper Installation
finished wall
Installation surface of bowl
has 1/16” wall gap
across entire surface.
Improper Installation
finished wall
Ø Uneven Wall Gap
Top and Bottom mounting
surfaces must be in
the same vertical plane.
Baseboard
Finished Wall
5-1/2"
(140mm)
4-3/4" (121mm)
18-1/2" (470mm)
2-3/4"
(70mm)
15-3/8" (390mm)
24-1/2" (622mm)
1-1/2" (38mm)
17"
(432mm)
1" N.P.T. for
Flushometer Valve
11-1/2"
(292mm)
2-5/16"
(59mm)
12-3/4"
(324mm)
7-1/2"
(190mm)
16"
(406mm)
*6-3/8"
(162mm)
*Suggested Dimension
9" (229mm)
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
# SS-00368 v.03
Printed in U.S.A. | © TOTO USA 06/09 | Printed on recycled paper ƛ
CST744E(G)(R)(B)
Eco Drake® Close Coupled Toilet, 1.28GPF
FEATURES
• E-Max® flushing system
• Optional SanaGloss® ceramic glaze - SanaGloss
glaze prevents debris, and mold from sticking to
ceramic surfaces, leading to fewer chemicals.
•
Close coupled commercial grade, high
performance toilet
• Elongated front bowl and tank set, less seat
• Chrome trip lever
• 12" Rough-in, less supply
MODELS
• CST744EG
with SanaGloss (#01, #03, #11, #12)
• CST744E
Same as above less SanaGloss (#51 only)
• CST744ERG
with SanaGloss (#01, #03, #11, #12) and right hand
trip lever
• CST744ER
Same as above less SanaGloss (#01 only)and right
hand trip lever
• CST744ERB*
Same as CST744ER with right hand trip lever and boltdown tank lid (special order) (#01 Cotton only)
COMPONENTS
• C744EG - Elongated Front Bowl with SanaGloss
• C744E - Elongated Front Bowl less SanaGloss
• ST743E - Tank and Cover only - Left-hand trip lever
• ST743ER - Tank and Cover only - Right-hand trip lever
• ST743ERB - Tank and Cover only - Right-hand trip
lever and bolt-down lid (#01 Cotton only)
• SS114 SoftClose® seat (sold separately)
• SC134 Commercial seat (sold separately)
• SC534 Commercial seat (sold separately)
COLORS/FINISHES
• #01 Cotton
#03 Bone
#11 Colonial White
#12 Sedona Beige
#51 Ebony
PRODUCT SPECIFICATION
The two-piece E-Max flushing system toilet shall be
1.28GPF/4.8LPF. Toilet shall have high-profile tank,
elongated front bowl and chrome trip lever. Toilet shall
be TOTO Model CST744E____.
CODES/STANDARDS
•
•
•
•
Meets and exceeds ASME A112.19.2/CSA B45.1
Certifications: IAPMO(cUPC), EPA Watersense,
State of Massachusetts , City of Los Angeles, and
others
Code compliance: UPC, IPC, NSPC, NPC Canada,
and others
Legislative compliance: California AB715, California
Green Building Code, City of Los Angeles Water
Efficiency Ordinance
CST744E(G)(R)(B)
Eco Drake® Close Coupled Toilet, 1.28GPF
SPECIFICATIONS
INSTALLATION NOTES
•
•
•
•
•
•
•
•
•
•
Back-to-Back Toilet Installations:
TOTO recommends the use of a nationally listed,
double sanitary tee-wye only, in vertical waste stacks,
in accordance with the stipulations noted in the
majority of nationally recognized plumbing codes.
•
Water Use
Flush System
Min. Water Pressure
Water Surface
Trap Diameter
Rough-in
Trap Seal
Warranty
Material
Shipping Weight
1.28 GPF/4.8LPF
E-Max®
8 psi (static)
10-1/4" x 8-1/2"
2-1/8"
12"
2-3/8"
One Year Limited Warranty
Vitreous china
C744E(G) - 52lbs
ST743E(R)(B) - 35lbs
Shipping Dimensions C744E(G)
29-1/2"L x 16"W1
x 10-1/4"W2 x 18-1/4"H
Double Combination Wye / 1/8 Bend
YES
Double Sanitary Tee / Sanitary Cross
NO
ST743E(R)(B)
20-1/8"L x 8-1/4"W
x 15-1/2"H
14"
(355mm)
5-1/2" (140mm)
18-1/2" (470mm)
1-1/8"
(30mm)
28" (710mm)
19-1/2" (494mm)
28-1/2"
(724mm)
1/2" Supply
14-5/8"
(370mm)
12" (305mm)
*8"
(202mm)
9"
(228mm)
*6"
(153mm)
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
# SS-00215 v.05
Printed in U.S.A. | © TOTO USA 02/10 | Printed on recycled paper ƛ
CST744EF(R).10
Eco Drake® Close Coupled Toilet, 1.28GPF, 10" Rough-In
FEATURES
• E-Max® flushing system, low consumption
(1.28GPF/4.8LPF)
• Universal Height
• Two-piece design with high-profile tank
• Elongated front bowl and tank set, less seat
• ADA compliant
• Chrome trip lever
• 10" Rough-in, less supply
MODELS
• CST744EF.10#01
Elongated bowl, 10" rough-in, less seat
• CST744EFR.10#01
Same as above with right hand trip lever
COMPONENTS
• C744EF.10 - Elongated Front Bowl, 10" rough-in
• ST743E - Tank and Cover only - Left-hand trip lever
• ST743ER - Tank and Cover only - Right-hand trip lever
• SS114 SoftClose® seat (sold separately)
• SC134 commercial seat (sold separately)
• SC534 commercial seat (sold separately)
CODES/STANDARDS
COLORS/FINISHES
•
•
• Standard
#01 Cotton
•
PRODUCT SPECIFICATION
The two-piece low consumption E-Max flushing
system toilet shall be 1.28GPF/4.8LPF. Toilet shall
be at universal height and be ADA compliant. Toilet
shall have high-profile tank, elongated front bowl
and Chrome trip lever. Toilet shall be TOTO Model
CST744EF____#01.
•
•
Meets and exceeds ASME A112.19.2/CSA B45.1
Certifications: IAPMO(cUPC), EPA Watersense,
State of Massachusetts , City of Los Angeles, and
others
Code compliance: UPC, IPC, NSPC, NPC Canada,
and others
Legislative Compliance: California AB715,
California Green Building Code, City of Los
Angeles Water Efficiency Ordinance
ADA compliant (when installed with trip lever
located on the approach side)
CST744EF(R).10
Eco Drake® Close Coupled Toilet, 1.28GPF
SPECIFICATIONS
INSTALLATION NOTES
•
•
•
•
•
•
•
•
•
•
Back-to-Back Toilet Installations:
TOTO recommends the use of a nationally listed,
double sanitary tee-wye only, in vertical waste stacks,
in accordance with the stipulations noted in the
majority of nationally recognized plumbing codes.
•
Water Use
Flush System
Min. Water Pressure
Water Surface
Trap Diameter
Rough-in
Trap Seal
Warranty
Material
Shipping Weight
1.28 GPF/4.8LPF
E-Max
8 psi (static)
7-7/8" x 10-5/16"
2-1/8"
10"
2-3/8"
One Year Limited Warranty
Vitreous china
C744EF.10
48 lbs.
ST743E(R)
32 lbs.
Shipping Dimensions C744EF.10
29" L X 15" W1 X
10-1/2" W2 X 17-1/8" H
d
Double Combination Wye / 1/8 Bend
Double Sanitary Tee / Sanitary Cross
YES
NO
ST743E(R)
18" L X 9" W X 16" H
5-1/2”
(140mm)
14”
(355mm)
3/4”
(20mm)
18-1/2” (470mm)
28” (713mm)
10”
(254mm)
30-1/8” (756mm)
*8”
(230mm)
17-1/4” (438mm)
19-1/2” (494mm)
9-7/8” (251mm)
6” (153mm)
* SUGGESTED DIMENSION
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
# SS-00448 v.03
Printed in U.S.A. | © TOTO USA 06/09 | Printed on recycled paper ƛ
CST744EL
Eco Drake® Close Coupled Toilet, ADA, 1.28GPF
FEATURES
• E-Max® flushing system, low consumption
(1.28GPF/4.8LPF)
• Universal Height
• Two-piece design with high-profile tank
• Elongated front bowl and tank set, less seat
• Chrome trip lever
• 12" Rough-in, less supply
• ADA compliant
MODELS
• CST744EL
Elongated bowl, 12" rough-in, less seat
• CST744ELR*
Same as CST744EL with right hand trip lever (special order)
• CST744ELRB*
Same as CST744EL with right hand trip lever and boltdown tank lid (special order) (#01 Cotton only)
COMPONENTS
• C744EL - Elongated Front Bowl
• ST743E - Tank and Cover only - Left-hand trip lever
• ST743ER - Tank and Cover only - Right-hand trip lever
• ST743ERB - Tank and Cover only - Right-hand trip
lever and bolt-down tank lid (#01 Cotton only)
•
•
•
•
SS114 SoftClose® seat (sold separately)
SS204 SoftClose® seat (sold separately)
SC134 commercial seat (sold separately)
SC534 commercial seat (sold separately)
CODES/STANDARDS
COLORS/FINISHES
•
•
• #01 Cotton
#03 Bone
#11 Colonial White
#12 Sedona Beige
#51 Ebony
•
PRODUCT SPECIFICATION
The two-piece E-Max flushing system toilet shall be
1.28GPF/4.8LPF. Toilet shall be universal height and
ADA compliant. Toilet shall have high-profile tank,
elongated front bowl and chrome trip lever. Toilet shall
be TOTO Model CST744EL____.
•
•
Meets and exceeds ASME A112.19.2/CSA B45.1
Certifications: IAPMO(cUPC), EPA Watersense,
State of Massachusetts , City of Los Angeles, and
others
Code compliance: UPC, IPC, NSPC, NPC Canada,
and others
Legislative Compliance: California AB715,
California Green Building Code, City of Los
Angeles Water Efficiency Ordinance
ADA compliant (when installed with trip lever
located on the approach side)
CST744EL
Eco Drake® Close Coupled Toilet, ADA, 1.28GPF
SPECIFICATIONS
INSTALLATION NOTES
•
•
•
•
•
•
•
•
•
•
Back-to-Back Toilet Installations:
TOTO recommends the use of a nationally listed,
double sanitary tee-wye only, in vertical waste stacks,
in accordance with the stipulations noted in the
majority of nationally recognized plumbing codes.
•
Water Use
Flush System
Min. Water Pressure
Water Surface
Trap Diameter
Rough-in
Trap Seal
Warranty
Material
Shipping Weight
1.28 GPF/4.8LPF
E-Max
8 psi (static)
10-3/8" x 8-1/4"
2-1/8"
12"
2-3/8"
One Year Limited Warranty
Vitreous china
C744EL - 56.5lbs
ST743E(R)(B) - 35lbs
Shipping Dimensions C744EL
29-1/2"L x 16"W1
x 10-1/4"W2 x 18-1/4"H
Double Combination Wye / 1/8 Bend
YES
Double Sanitary Tee / Sanitary Cross
NO
ST743E(R)(B)
20-1/8"L x 8-1/4"W
x 15-1/2"H
14"
(355mm)
5-1/2"
(140mm)
18-1/2" (470mm)
1-1/4"
(30mm)
28" (710mm)
19-1/2" (494mm)
30-1/2"
(775mm)
17-1/2"
(445mm)
16-1/2"
(420mm)
1/2" Supply
8"* (202mm)
12" (305mm)
9-7/8"
(250mm)
6"*
(153mm)
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
# SS-00214 v.05
Printed in U.S.A. | © TOTO USA 02/10 | Printed on recycled paper ƛ
CST743E
Eco Drake® Close Coupled Toilet, 1.28GPF
FEATURES
•
•
•
•
•
E-Max® flushing system
Close coupled, high performance toilet
Round front bowl and tank set, less seat
Chrome trip lever
12" Rough-in, less supply
MODELS
• CST743E
Round bowl, 12" rough-in, less seat
• CST743ER
Same as CST743E with right hand trip lever (special order)
• CST743ERB*
Same as CST743ER with right hand trip lever and boltdown tank lid (special order) (#01 Cotton only)
COMPONENTS
• C743E - Round Front Bowl
• ST743S - Tank and Cover only - Left-hand trip lever
• ST743SR - Tank and Cover only - Right-hand trip lever
• ST743SRB - Tank and Cover only - Right-hand trip
lever and bolt-down lid (#01 Cotton only)
• SS113 SoftClose® seat (sold separately)
COLORS/FINISHES
• #01 Cotton
#03 Bone
#11 Colonial White
#12 Sedona Beige
#51 Ebony
PRODUCT SPECIFICATION
The two-piece G-Max flushing system toilet shall be
1.28GPF/4.8LPF. Toilet shall have high-profile tank,
round front bowl and chrome trip lever. Toilet shall be
TOTO Model CST743E____.
CODES/STANDARDS
•
•
•
•
Meets and exceeds ASME A112.19.2/CSA B45.1
Certifications: IAPMO(cUPC), EPA Watersense,
State of Massachusetts , City of Los Angeles, and
others
Code compliance: UPC, IPC, NSPC, NPC Canada,
and others
Legislative compliance: California AB715, California
Green Building Code, City of Los Angeles Water
Efficiency Ordinance
CST743E
Eco Drake® Close Coupled Toilet, 1.28GPF
SPECIFICATIONS
INSTALLATION NOTES
•
•
•
•
•
•
•
•
•
•
Back-to-Back Toilet Installations:
TOTO recommends the use of a nationally listed,
double sanitary tee-wye only, in vertical waste stacks,
in accordance with the stipulations noted in the
majority of nationally recognized plumbing codes.
•
Water Use
Flush System
Min. Water Pressure
Water Surface
Trap Diameter
Rough-in
Trap Seal
Warranty
Material
Shipping Weight
1.28 GPF/4.8LPF
E-Max
8 psi (static)
10-1/4" x 8-1/2"
2-1/8"
12"
2-3/8"
One Year Limited Warranty
Vitreous china
C743E - 53lbs
ST743S(R)(B) - 35lbs
Shipping Dimensions C743E
27-3/4"L x 15"W1
x 10-1/4"W2 x 15-3/4"H
Double Combination Wye / 1/8 Bend
Double Sanitary Tee / Sanitary Cross
YES
NO
ST743S (R)(B)
20-1/8"L x 8-1/4"W
x 15-1/2"H
16-1/2" (420 mm)
14"
(355 mm)
5-1/2"
(140 mm)
3/4"
(20 mm)
26-3/8" (670 mm)
19-1/2" (494 mm)
28-1/2"
(724 mm)
1/2" Supply
14-5/8"
(370 mm)
12"
(305 mm)
*8"
(203mm)
*6"
(152mm)
* Suggested Dimension
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
# SS-00354 v.04
Printed in U.S.A. | © TOTO USA 06/09 | Printed on recycled paper ƛ
CST744S(G)
Drake® Close Coupled Toilet, 1.6GPF
FEATURES
•
•
•
•
•
•
G-Max® flushing system
Optional SanaGloss® ceramic glaze - SanaGloss glaze
prevents debris, and mold from sticking to ceramic
surfaces, leading to fewer chemicals and less water in
cleaning.
Close coupled commercial grade, high performance
toilet
Elongated front bowl and tank set, less seat
Chrome trip lever
12" Rough-in, less supply
MODELS
•
•
•
•
•
•
CST744SG
Elongated bowl, SanaGloss, 12" rough-in, less seat
CST744S
Same as above less SanaGloss
CST744SB*
Same as CST744S with bolt down lid (special order)
CST744SD*
Same as CST744S with insulated tank (special order)
CST744SDB*
Same as CST744S with bolt down lid & insulated tank
(special order)
CST744SR*
Same as CST744S with right hand trip lever (special order)
COMPONENTS
•
•
•
•
•
•
C744SL - Elongated Front Bowl
ST743S - Tank and Cover only
ST743SB - Tank and Cover only (bolt down lid)
ST743SD - Tank and Cover only (insulated tank)
ST743SDB - Tank and Cover only (bolt down lid and
insulated tank)
ST743SR - Tank and Cover only (right hand trip lever)
•
•
•
•
SS114 SoftClose® seat (sold separately)
SS204 SoftClose® seat (sold separately)
SC134 commercial seat (sold separately)
SC534 commercial seat (sold separately)
PRODUCT SPECIFICATION
The two-piece G-Max flushing system toilet shall be
1.6GPF/6.0LPF. Toilet shall have high-profile tank, elongated
front bowl and chrome trip lever. Toilet model CST744SG
shall have SanaGloss ceramic glaze. Toilet shall be TOTO
Model CST744S____.
CODES/STANDARDS
COLORS/FINISHES
•
•
•
•
Standard
#01 Cotton
#03 Bone
#11 Colonial White
#12 Sedona Beige
#51 Ebony
Meets and exceeds ASME A112.19.2/CSA B45.1
Certifications: IAPMO(cUPC), State of Massachusetts ,
City of Los Angeles, and others
Code compliance: UPC, IPC, NSPC, NPC Canada, and
others
CST744S(G)
Drake® Close Coupled Toilet, 1.6GPF
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
Water Use
Flush System
Min. Water Pressure
Water Surface
Trap Diameter
Rough-in
Trap Seal
Warranty
Material
Shipping Weight
•
Shipping Dimensions
INSTALLATION NOTES
1.6 GPF/6.0LPF
G-Max
8 psi (static)
10-1/4" x 8-1/2"
2-1/8"
12"
2-3/8"
One Year Limited Warranty
Vitreous china
C744E(G) - 52lbs
ST743S - 35lbs
C744E(G)
29-1/2"L x 16"W1
x 10-1/4"W2 x 18-1/4"H
Back-to-Back Toilet Installations:
TOTO recommends the use of a nationally listed, double
sanitary tee-wye only, in vertical waste stacks, in accordance
with the stipulations noted in the majority of nationally
recognized plumbing codes.
Double Combination Wye / 1/8 Bend
YES
ST743S
20-1/8"L x 8-1/4"W
x 15-1/2"H
Double Sanitary Tee / Sanitary Cross
NO
14"
(355mm)
5-1/2" (140mm)
18-1/2" (470mm)
1-1/8"
(30mm)
28" (710mm)
19-1/2" (494mm)
28-1/2"
(724mm)
1/2" Supply
14-5/8"
(370mm)
12" (305mm)
*8"
(202mm)
9"
(228mm)
*6"
(153mm)
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
# SS-00351 v.03
Printed in U.S.A. | © TOTO USA 06/09 | Printed on recycled paper ƛ
CST744SF(R).10
Drake® Close Coupled Toilet, 1.6GPF, 10" Rough-In
FEATURES
• G-Max® flushing system, low consumption
(1.6GPF/6.0LPF)
• Universal Height
• Two-piece design with high-profile tank
• Elongated front bowl and tank set, less seat
• ADA compliant
• Chrome trip lever
• 10" Rough-in, less supply
MODELS
• CST744SF.10#01
Elongated bowl, 10" rough-in, less seat
• CST744SFR.10#01
Same as above with right hand trip lever
COMPONENTS
• CT744EF.10 - Elongated Front Bowl, 10" rough-in
• ST743S - Tank and Cover only - Left-hand trip lever
• ST743SR - Tank and Cover only - Right-hand trip lever
• SS114 SoftClose® seat (sold separately)
• SC134 seat (sold separately)
• SC534 seat (sold separately)
COLORS/FINISHES
CODES/STANDARDS
• Standard
#01 Cotton
•
•
•
PRODUCT SPECIFICATION
The two-piece G-Max flushing system toilet shall be
1.6GPF/6.0LPF. Toilet shall be at universal height and
be ADA compliant. Toilet shall have high-profile tank,
elongated front bowl and chrome trip lever. Toilet shall
be TOTO Model CST744SF__.10#01.
•
Meets and exceeds ASME A112.19.2/CSA B45.1,
Certifications: IAPMO(cUPC), State of
Massachusetts , City of Los Angeles, and others
Code compliance: UPC, IPC, NSPC, NPC Canada,
and others
ADA compliant (when installed with trip lever
located on the approach side)
CST744SF(R).10
Drake® Close Coupled Toilet, 1.6GPF
SPECIFICATIONS
INSTALLATION NOTES
•
•
•
•
•
•
•
•
•
•
Back-to-Back Toilet Installations:
TOTO recommends the use of a nationally listed,
double sanitary tee-wye only, in vertical waste stacks,
in accordance with the stipulations noted in the
majority of nationally recognized plumbing codes.
•
Water Use
Flush System
Min. Water Pressure
Water Surface
Trap Diameter
Rough-in
Trap Seal
Warranty
Material
Shipping Weight
1.6 GPF/6.0LPF
G-Max
8 psi (static)
10-5/16" x 7-7/8"
2-1/8"
10"
2-3/8"
One Year Limited Warranty
Vitreous china
CT744EF.10 - 48lbs
ST744S(R) - 32lbs
Shipping Dimensions CT744EF.10
29-"L x 15"W1 x 10-1/2"W2
x 17-1/8"H
Double Combination Wye / 1/8 Bend
Double Sanitary Tee / Sanitary Cross
YES
NO
ST743S(R)
18"L x 9"W x 16"H
5-1/2”
(140mm)
14”
(355mm)
3/4”
(20mm)
18-1/2” (470mm)
28” (713mm)
10”
(254mm)
30-1/8” (756mm)
*8”
(230mm)
17-1/4” (438mm)
19-1/2” (494mm)
9-7/8” (251mm)
6” (153mm)
* SUGGESTED DIMENSION
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
# SS-00451 v.03
Printed in U.S.A. | © TOTO USA 06/09 | Printed on recycled paper ƛ
CST744SL
Drake® Close Coupled Toilet, ADA, 1.6GPF
FEATURES
• G-Max® flushing system, low consumption
(1.6GPF/6.0LPF)
• Universal Height
• Two-piece design with high-profile tank
• Elongated front bowl and tank set, less seat
• Chrome trip lever
• 12" Rough-in, less supply
• ADA compliant
MODELS
• CST744SL
Elongated bowl, 12" rough-in, less seat
• CST744SLB*
Same as above with bolt down lid (special order)
• CST744SLD*
Same as CST744SL with insulated tank (special order)
• CST744SLDB*
Same as CST744SL with bolt down lid & insulated
tank (special order)
• CST744SLR*
Same as CST744SL with right hand trip lever (special order)
COMPONENTS
• C744EL - Elongated Front Bowl
• ST743S - Tank and Cover only - Left-hand trip lever
• ST743SR - Tank and Cover only - Right-hand trip lever
•
•
•
•
SS114 SoftClose® seat (sold separately)
SS204 SoftClose® seat (sold separately)
SC534 Seat (sold separately)
SC134 Seat (sold separately)
COLORS/FINISHES
CODES/STANDARDS
• Standard
#01 Cotton
#03 Bone
#11 Colonial White
#12 Sedona Beige
#51 Ebony
•
•
PRODUCT SPECIFICATION
The two-piece G-Max flushing system toilet shall be
1.6GPF/6.0LPF. Toilet shall be universal height and
ADA compliant. Toilet shall have high-profile tank,
elongated front bowl and chrome trip lever. Toilet shall
be TOTO Model CST744SL____.
•
•
Meets and exceeds ASME A112.19.2/CSA B45.1,
Certifications: IAPMO(cUPC), State of
Massachusetts , City of Los Angeles, and others
Code compliance: UPC, IPC, NSPC, NPC Canada,
and others
ADA compliant (when installed with trip lever
located on the approach side)
CST744SL
Drake® Close Coupled Toilet, ADA, 1.6GPF
SPECIFICATIONS
INSTALLATION NOTES
•
•
•
•
•
•
•
•
•
•
Back-to-Back Toilet Installations:
TOTO recommends the use of a nationally listed,
double sanitary tee-wye only, in vertical waste stacks,
in accordance with the stipulations noted in the
majority of nationally recognized plumbing codes.
•
Water Use
Flush System
Min. Water Pressure
Water Surface
Trap Diameter
Rough-in
Trap Seal
Warranty
Material
Shipping Weight
1.6 GPF/6.0LPF
G-Max
8 psi (static)
10-3/8" x 8-1/4"
2-1/8"
12"
2-3/8"
One Year Limited Warranty
Vitreous china
C744EL - 56.5lbs
ST743S - 35lbs
Shipping Dimensions C744EL
29-1/2"L x 16"W1
x 10-1/4"W2 x 18-1/4"H
Double Combination Wye / 1/8 Bend
YES
Double Sanitary Tee / Sanitary Cross
NO
ST743S
20-1/8"L x 8-1/4"W
x 15-1/2"H
14"
(355mm)
5-1/2"
(140mm)
18-1/2" (470mm)
1-1/4"
(30mm)
28" (710mm)
19-1/2" (494mm)
30-1/2"
(775mm)
17-1/2"
(445mm)
16-1/2"
(420mm)
1/2" Supply
8"* (202mm)
12" (305mm)
9-7/8"
(250mm)
6"*
(153mm)
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
# SS-00350 v.04
Printed in U.S.A. | © TOTO USA 06/09 | Printed on recycled paper ƛ
CST743S
Drake® Close Coupled Toilet, 1.6GPF
FEATURES
•
•
•
•
•
G-Max® flushing system
Close coupled, high performance toilet
Round front bowl and tank set, less seat
Chrome trip lever
12" Rough-in, less supply
MODELS
• CST743S
Round bowl, 12" rough-in, less seat
• CST743SB*
Same as CST743S with bolt down lid (special order)
• CST743SD*
Same as CST743S with insulated tank (special order)
• CST743SDB*
Same as CST743S with bolt down lid & insulated
tank (special order)
• CST743SR*
Same as CST743S with right hand trip lever (special order)
COMPONENTS
• C743E - Round Front Bowl
• ST743S - Tank and Cover only - Left-hand trip lever
• ST743SB - Tank and Cover only - Bolt down lid
• ST743SD - Tank and Cover only - Insulated tank
• ST743SDB - Tank and Cover only - Bolt down lid and
insulated tank
• ST743SR - Tank and Cover only - Right-hand trip lever
PRODUCT SPECIFICATION
The two-piece G-Max flushing system toilet shall be
1.6GPF/6.0LPF. Toilet shall have high-profile tank,
round front bowl and chrome trip lever. Toilet shall be
TOTO Model CST743S____.
• SS113 SoftClose® seat (sold separately)
CODES/STANDARDS
COLORS/FINISHES
• Standard
#01 Cotton
#03 Bone
#11 Colonial White
#12 Sedona Beige
#51 Ebony
•
•
•
Meets and exceeds ASME A112.19.2/CSA B45.1
Certifications: IAPMO(cUPC), State of
Massachusetts , City of Los Angeles, and others
Code compliance: UPC, IPC, NSPC, NPC Canada,
and others
CST743S
Drake® Close Coupled Toilet, 1.6GPF
SPECIFICATIONS
INSTALLATION NOTES
•
•
•
•
•
•
•
•
•
•
Back-to-Back Toilet Installations:
TOTO recommends the use of a nationally listed,
double sanitary tee-wye only, in vertical waste stacks,
in accordance with the stipulations noted in the
majority of nationally recognized plumbing codes.
•
Water Use
Flush System
Min. Water Pressure
Water Surface
Trap Diameter
Rough-in
Trap Seal
Warranty
Material
Shipping Weight
1.6 GPF/6.0LPF
G-Max®
8 psi (static)
10-1/4" x 8-1/2"
2-1/8"
12"
2-3/8"
One Year Limited Warranty
Vitreous china
C743E - 53lbs
ST743S - 35lbs
Shipping Dimensions C743E
27-3/4"L x 15"W1
x 10-1/4"W2 x 15-3/4"H
Double Combination Wye / 1/8 Bend
Double Sanitary Tee / Sanitary Cross
YES
NO
ST743S
20-1/8"L x 8-1/4"W
x 15-1/2"H
16-1/2" (420 mm)
14"
(355 mm)
5-1/2"
(140 mm)
3/4"
(20 mm)
26-3/8" (670 mm)
19-1/2" (494 mm)
28-1/2"
(724 mm)
1/2" Supply
14-5/8"
(370 mm)
12"
(305 mm)
*8"
(203mm)
*6"
(152mm)
* Suggested Dimension
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
# SS-00355 v.04
Printed in U.S.A. | © TOTO USA 06/09 | Printed on recycled paper ƛ
CST454CEF(R)(G)
Drake® II Close Coupled Toilet, 1.28GPF
FEATURES
• Double Cyclone® flushing system, low consumption
(1.28GPF/4.8LPF)
• Optional SanaGloss® ceramic glaze - SanaGloss
glaze prevents debris, and mold from sticking to
ceramic surfaces, leading to fewer chemicals.
• Universal Height
• Decorative two-piece design with high-profile tank
• Elongated front bowl and tank set, less seat
• Chrome trip lever
• 12" Rough-in, less supply
MODELS
• CST454CEFG
With SanaGloss ceramic glaze
• CST454CEF
COMPONENTS
•
•
•
•
C454CEFG Elongated bowl with SanaGloss
C454CEF Elongated bowl, less SanaGloss
ST454E Tank and cover only
ST454ER Tank and cover only, right-hand trip lever
•
•
•
•
•
SS224 SoftClose® seat (sold separately)
SS214 SoftClose® seat (sold separately)
SS204 SoftClose® seat (sold separately)
SS114 SoftClose® seat (sold separately)
SC534 Commercial seat (sold separately)
COLORS/FINISHES
• Standard
#01 Cotton
#03 Bone
#11 Colonial White
#12 Sedona Beige
#51 Ebony (not available in SanaGloss)
CODES/STANDARDS
•
•
•
•
PRODUCT SPECIFICATION
The Two-piece low consumption Double Cyclone
flushing system toilet shall be 1.28GPF/4.8LPF. Toilet
shall have optional SanaGloss ceramic glaze and be
at Universal Height. Toilet shall have high-profile tank,
elongated front bowl and Chrome trip lever. Toilet
shall be TOTO Model CST454CEF____.
•
Meets and exceeds ASME A112.19.2/CSA B45.1
Certifications: IAPMO(cUPC), EPA Watersense, State
of Massachusetts , City of Los Angeles, and others
Code compliance: UPC, IPC, NSPC, NPC Canada,
and others
Legislative Compliance: California AB715,
California Green Building Code, City of Los
Angeles Water Efficiency Ordinance
ADA compliant (when installed with trip lever
located on the approach side)
CST454CEF(R)(G)
Drake® II Close Coupled Toilet, 1.28GPF
SPECIFICATIONS
INSTALLATION NOTES
•
•
•
•
•
•
•
•
•
•
Back-to-Back Toilet Installations:
TOTO recommends the use of a nationally listed,
double sanitary tee-wye only, in vertical waste stacks,
in accordance with the stipulations noted in the
majority of nationally recognized plumbing codes.
•
Water Use
Flush System
Min. Water Pressure
Water Surface
Trap Diameter
Rough-in
Trap Seal
Warranty
Material
Shipping Weight
1.28 GPF/4.8LPF
Double Cyclone
8 psi (static)
7-1/8" x 9-1/8"
2-1/8"
12"
2-1/8"
One Year Limited Warranty
Vitreous china
C454CEF(G) 57.3lbs.
ST454E(R)
31.5lbs.
Shipping Dimensions C454CEF(G)
29" L X 14-3/4" W1 X
11-1/2" W2 X 16-1/4" H
d
Double Combination Wye / 1/8 Bend
YES
Double Sanitary Tee / Sanitary Cross
NO
ST454E(R)
18" L X 9" W X 16" H
28-5/16”(720mm)
18-1/2”
(470mm)
14”
(356mm)
5-1/2”
(140mm)
16-1/2”
(419mm)
13/16”
(20mm)
17-1/4”
(439mm)
30”
(762mm)
*8”
(203mm)
12”
(305mm)
*5-7/8”
(150mm)
9-7/8”
(251mm)
* SUGGESTED
DIMENSION
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
SS-00239 v.09
Printed in U.S.A. | © TOTO USA 05/10 | Printed on recycled paper ƛ
MS854114E(G)/MS853113E
Eco UltraMax® One-Piece Toilet, 1.28GPF
FEATURES
• E-Max® flushing system, low consumption
(1.28GPF/4.8LPF)
• Optional SanaGloss® ceramic glaze - SanaGloss
glaze prevents debris, and mold from sticking to
ceramic surfaces, leading to fewer chemicals.
• One-piece decorative toilet with high-profile tank
• Elongated front bowl with SoftClose® seat (SS114)
or round front bowl with SoftClose® seat (SS113)
• 12" Rough-in
• Chrome trip lever
MODELS
• MS854114EG
Elongated bowl with SanaGloss and SoftClose seat
(SS114)
• MS854114E
Elongated bowl with SoftClose seat (SS114)
•
MS853113E
Round bowl with SoftClose seat (SS113)
COLORS/FINISHES
• Standard
#01 Cotton
#03 Bone
#11 Colonial White
#12 Sedona Beige
PRODUCT SPECIFICATION
The one-piece low consumption E-Max flushing
system toilet shall be 1.28GPF/4.8LPF. Toilet shall be
of elongated front bowl (MS854) or round front bowl
(MS853) with a high-profile tank and SoftClose seat.
Toilet shall have optional SanaGloss ceramic glaze.
Toilet shall have chrome trip lever. Toilet shall be
TOTO Model MS85____________.
CODES/STANDARDS
•
•
•
•
Meets and exceeds ASME A112.19.2/CSA B45.1
Certifications: IAPMO(cUPC), EPA Watersense,
State of Massachusetts , City of Los Angeles, and
others
Code compliance: UPC, IPC, NSPC, NPC Canada,
and others
Legislative compliance: California AB715, California
Green Building Code, City of Los Angeles Water
Efficiency Ordinance
MS854114E(G)/MS853113E
Eco UltraMax® One-Piece Toilet, 1.28GPF
SPECIFICATIONS
INSTALLATION NOTES
•
•
•
•
•
•
•
•
•
•
Water Use
Flush System
Min. Water Pressure
Water Surface
Trap Diameter
Rough-in
Trap Seal
Warranty
Material
Shipping Weight
•
Shipping Dimensions 30-3/4" L x 18-1/8"W
x 27-1/8" H
Finished Wall
1.28 GPF/4.8 LPF
E-Max®
8 psi (static)
10-1/4" x 8-1/4"
2-1/8"
12"
2-3/8"
One Year Limited Warranty
Vitreous china
MS854114E(G) 93 lbs.
MS853113E 91 lbs.
18-1/2” (470mm)
16-1/2” (420mm)
Back-to-Back Toilet Installations:
TOTO recommends the use of a nationally listed,
double sanitary tee-wye only, in vertical waste stacks,
in accordance with the stipulations noted in the
majority of nationally recognized plumbing codes.
Double Combination Wye / 1/8 Bend
Double Sanitary Tee / Sanitary Cross
YES
NO
MS854114E(G)
MS853113E
5-1/2”
(140mm)
3/4”
(20mm)
28” (710mm)
26-1/2” (675mm)
MS854114E(G)
MS853113E
16-1/2”(420mm)
27-1/8”
(690mm)
1/2”
supply
14-5/8”
(370mm)
Finished
Floor
12” (305mm)
5-1/8”
(130mm)
*5”
(127mm)
* Suggested Dimension
Finished
Floor
9-7/8” (250mm)
8-5/8” (220mm)
MS854114E(G)
MS853113E
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
# SS-00206 v.04
Printed in U.S.A. | © TOTO USA 08/09 | Printed on recycled paper ƛ
MS854114EL(G)(R)
Eco UltraMax® One-Piece Toilet, ADA Height, 1.28GPF
FEATURES
• E-Max® flushing system, low consumption
(1.28GPF/4.8LPF)
• Optional SanaGloss® ceramic glaze - SanaGloss
glaze prevents debris, and mold from sticking to
ceramic surfaces, leading to fewer chemicals.
• One-piece decorative toilet with high-profile tank
• Elongated front bowl with SoftClose® seat (SS114)
• 12" Rough-in
• ADA compliant (when installed with trip lever
located on the approach side)
• Chrome trip lever
MODELS
• MS854114ELG
ADA height toilet with elongated bowl, SanaGloss
and SoftClose seat (SS114)
• MS854114EL
ADA height toilet with elongated bowl and
SoftClose seat (SS114)
• MS854114ELR#01
ADA height toilet with elongated bowl, right hand
trip lever and SoftClose seat (SS114)
COLORS/FINISHES
• Standard
#01 Cotton
#03 Bone
#11 Colonial White
#12 Sedona Beige
PRODUCT SPECIFICATION
The one-piece low consumption E-Max flushing
system toilet shall be 1.28GPF/4.8LPF. Toilet shall be
of elongated front bowl (MS854) with a high-profile
tank and SoftClose seat. Toilet shall be ADA compliant
(when installed with trip lever located on the approach
side). Toilet shall have chrome trip lever. Toilet shall
have optional SanaGloss ceramic glaze. Toilet shall be
TOTO Model MS854114EL_____.
CODES/STANDARDS
•
•
•
•
•
Meets and exceeds ASME A112.19.2/CSA B45.1
Certifications: IAPMO(cUPC), EPA Watersense,
State of Massachusetts , City of Los Angeles, and
others
Code compliance: UPC, IPC, NSPC, NPC Canada,
and others
Legislative Compliance: California AB715,
California Green Building Code, City of Los
Angeles Water Efficiency Ordinance
ADA compliant (when installed with trip lever
located on the approach side)
MS854114EL(G)
Eco UltraMax® One-Piece Toilet, ADA Height, 1.28GPF
SPECIFICATIONS
INSTALLATION NOTES
•
•
•
•
•
•
•
•
•
•
Water Use
Flush System
Min. Water Pressure
Water Surface
Trap Diameter
Rough-in
Trap Seal
Warranty
Material
Shipping Weight
•
Shipping Dimensions 32" L x 20"W x 17-3/4" H1
x 28-3/4" H2
Finished Wall
1.28 GPF/4.8 LPF
E-Max®
8 psi (static)
10-1/4" x 8-1/4"
2-1/8"
12"
2-3/8"
One Year Limited Warranty
Vitreous china
MS854114EL(G) 117 lbs.
Back-to-Back Toilet Installations:
TOTO recommends the use of a nationally listed,
double sanitary tee-wye only, in vertical waste stacks,
in accordance with the stipulations noted in the
majority of nationally recognized plumbing codes.
Double Combination Wye / 1/8 Bend
Double Sanitary Tee / Sanitary Cross
YES
NO
18-1/2” (470mm)
5-1/2”
(140mm)
1”
(25mm)
28-1/4” (715mm)
16-1/2”(420mm)
29-1/4”
(740mm)
1/2”
supply
17-1/4”
(440mm)
Finished
Floor
12” (305mm)
5-1/8”
(130mm)
*5”
(127mm)
* Suggested Dimension
Finished
Floor
9-3/4” (250mm)
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
# SS-00207 v.05
Printed in U.S.A. | © TOTO USA 08/09 | Printed on recycled paper ƛ
MS854114S(G)/MS853113S
UltraMax® One-Piece Toilet, 1.6GPF
FEATURES
• G-Max® flushing system, low consumption
(1.6GPF/6.0LPF)
• Optional SanaGloss® ceramic glaze - SanaGloss
glaze prevents debris, and mold from sticking to
ceramic surfaces, leading to fewer chemicals.
• One-piece decorative toilet with high-profile tank
• Elongated front bowl with SoftClose® seat (SS114)
or round front bowl with SoftClose® seat (SS113)
• 12" Rough-in
• Chrome trip lever
MODELS
• MS854114SG
Elongated bowl with SanaGloss and SoftClose seat
(SS114)
• MS854114S
Elongated bowl with SoftClose seat (SS114)
•
MS853113S
Round bowl with SoftClose seat (SS113)
COLORS/FINISHES
• Standard
#01 Cotton
#03 Bone
#11 Colonial White
#12 Sedona Beige
CODES/STANDARDS
PRODUCT SPECIFICATION
The one-piece G-Max flushing system toilet shall be
1.6GPF/6.0LPF. Toilet shall be of elongated front bowl
(MS854) or round front bowl (MS853) with a low-profile
tank and SoftClose seat. Toilet shall have chrome trip
lever. Toilet shall have optional SanaGloss ceramic
glaze. Toilet shall be TOTO Model MS85____________.
•
•
•
Meets and exceeds ASME A112.19.2/CSA B45.1
Certifications: IAPMO(cUPC), State of
Massachusetts , City of Los Angeles, and others
Code compliance: UPC, IPC, NSPC, NPC Canada,
and others
MS854114S(G)/MS853113S
UltraMax® One-Piece Toilet, 1.6GPF
SPECIFICATIONS
INSTALLATION NOTES
•
•
•
•
•
•
•
•
•
•
Water Use
Flush System
Min. Water Pressure
Water Surface
Trap Diameter
Rough-in
Trap Seal
Warranty
Material
Shipping Weight
•
Shipping Dimensions 30-3/4" L x 18-1/8"W
x 27-1/8" H
Finished Wall
1.6 GPF/6.0LPF
G-Max®
8 psi (static)
10-1/4" x 8-1/4"
2-1/8"
12"
2-3/8"
One Year Limited Warranty
Vitreous china
MS854114S(G) 93 lbs.
MS853113S(G) 91 lbs.
18-1/2” (470mm)
16-1/2” (420mm)
Back-to-Back Toilet Installations:
TOTO recommends the use of a nationally listed,
double sanitary tee-wye only, in vertical waste stacks,
in accordance with the stipulations noted in the
majority of nationally recognized plumbing codes.
Double Combination Wye / 1/8 Bend
Double Sanitary Tee / Sanitary Cross
YES
NO
MS854114S(G)
MS853113S(G)
5-1/2”
(140mm)
3/4”
(20mm)
28” (710mm)
26-1/2” (675mm)
MS854114S(G)
MS853113S(G)
16-1/2”(420mm)
27-1/8”
(690mm)
1/2”
supply
14-5/8”
(370mm)
Finished
Floor
12” (305mm)
5-1/8”
(130mm)
*5”
(127mm)
* Suggested Dimension
Finished
Floor
9-7/8” (250mm)
8-5/8” (220mm)
MS854114S(G)
MS853113S(G)
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
# SS-00160 v.05
Printed in U.S.A. | © TOTO USA 06/09 | Printed on recycled paper ƛ
MS854114SL
UltraMax® One-Piece Toilet, ADA Height, 1.28GPF
FEATURES
• G-Max® flushing system, low consumption
(1.6GPF/6.0LPF)
• One-piece decorative toilet with high-profile tank
• Elongated front bowl with SoftClose® seat (SS114)
• 12" Rough-in
• ADA compliant (when installed with trip lever
located on the approach side)
• Chrome trip lever
MODELS
• MS854114SL
ADA height toilet with elongated bowl and
SoftClose seat (SS114)
COLORS/FINISHES
• Standard
#01 Cotton
#03 Bone
#11 Colonial White
#12 Sedona Beige
CODES/STANDARDS
•
•
PRODUCT SPECIFICATION
•
The one-piece low consumption G-Max flushing
system toilet shall be 1.6GPF/6.0LPF. Toilet shall be
of elongated front bowl with a high-profile tank and
SoftClose seat. Toilet shall be ADA compliant (when
installed with trip lever located on the approach side).
Toilet shall have chrome trip lever. Toilet shall be
TOTO Model MS854114SL_____.
•
Meets and exceeds ASME A112.19.2/CSA B45.1,
Certifications: IAPMO(cUPC), State of
Massachusetts , City of Los Angeles, and others
Code compliance: UPC, IPC, NSPC, NPC Canada,
and others
ADA compliant (when installed with trip lever
located on the approach side)
MS854114SL
UltraMax® One-Piece Toilet, ADA Height, 1.28GPF
SPECIFICATIONS
INSTALLATION NOTES
•
•
•
•
•
•
•
•
•
•
Water Use
Flush System
Min. Water Pressure
Water Surface
Trap Diameter
Rough-in
Trap Seal
Warranty
Material
Shipping Weight
•
Shipping Dimensions 32"L x 20"W x 17-3/4" H1 x
28-3/4" H2
Finished Wall
1.6 GPF/6.0 LPF
G-Max®
8 psi (static)
10-5/16" x 8-1/4"
2-1/8"
12"
2-3/8"
One Year Limited Warranty
Vitreous china
99 lbs.
Back-to-Back Toilet Installations:
TOTO recommends the use of a nationally listed,
double sanitary tee-wye only, in vertical waste stacks,
in accordance with the stipulations noted in the
majority of nationally recognized plumbing codes.
Double Combination Wye / 1/8 Bend
Double Sanitary Tee / Sanitary Cross
YES
NO
18-1/2” (470mm)
5-1/2”
(140mm)
1”
(25mm)
28-1/4” (715mm)
16-1/2”(420mm)
29-1/4”
(740mm)
1/2”
supply
17-1/4”
(440mm)
Finished
Floor
12” (305mm)
5-1/8”
(130mm)
*5”
(127mm)
* Suggested Dimension
Finished
Floor
9-3/4” (250mm)
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
# SS-00370 v.03
Printed in U.S.A. | © TOTO USA 08/09 | Printed on recycled paper ƛ
MS604114CEF(R)(G)
UltraMax® II One-Piece Toilet, 1.28GPF
FEATURES
• Double Cyclone® flushing system, low consumption
(1.28GPF/4.8LPF)
• SanaGloss® ceramic glaze - SanaGloss glaze
prevents debris and mold from sticking to ceramic
surfaces, leading to fewer chemicals and less water
in cleaning
• Universal Height
• Decorative one-piece design with high-profile tank
• Elongated front bowl with SoftClose® seat (SS114)
• 12" rough-in
• Chrome trip lever
MODELS
• MS604114CEFG
With SanaGloss ceramic glaze, SS114 SoftClose
seat included (#01, #03, #11, #12)
• MS604114CEFRG
Same as above, with right-hand trip lever (#01)
• MS604114CEF
Less SanaGloss, SS114 SoftClose seat included
(#51)
COLORS/FINISHES
• #01 Cotton
#03 Bone
#11 Colonial White
#12 Sedona Beige
#51 Ebony (not available in SanaGloss)
CODES/STANDARDS
•
•
•
PRODUCT SPECIFICATION
The one-piece low consumption double cyclone
flushing system toilet shall be 1.28GPF/4.8LPF. Toilet
shall have SanaGloss ceramic glaze (except #51 Ebony)
and be at Universal Height. Toilet shall have highprofile tank, elongated front bowl with SoftClose seat
and Chrome trip lever. Toilet shall be TOTO Model
MS604114CEF_____.
•
•
Meets and exceeds ASME A112.19.2/CSA B45.1
Certifications: IAPMO(cUPC), EPA Watersense,
State of Massachusetts , City of Los Angeles, and
others
Code compliance: UPC, IPC, NSPC, NPC Canada,
and others
Legislative Compliance: California AB715,
California Green Building Code, City of Los
Angeles Water Efficiency Ordinance
ADA compliant (when installed with trip lever
located on the approach side)
MS604114CEF(R)(G)
UltraMax® II One-Piece Toilet, 1.28GPF
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
•
Water Use
Flush System
Min. Water Pressure
Water Surface
Trap Diameter
Rough-in
Trap Seal
Warranty
Material
Shipping Weight
Shipping Dimensions
INSTALLATION NOTES
1.28 GPF/4.8LPF
Double Cyclone
8 psi (static)
7-1/8" x 9-1/8"
2-1/8"
12"
2-1/8"
One Year Limited Warranty
Vitreous china
99 lbs.
32"L x 20"W x 17-3/4" H1 x
28-3/4" H2
Back-to-Back Toilet Installations:
TOTO recommends the use of a nationally listed,
double sanitary tee-wye only, in vertical waste stacks,
in accordance with the stipulations noted in the
majority of nationally recognized plumbing codes.
d
Double Combination Wye / 1/8 Bend
YES
Double Sanitary Tee / Sanitary Cross
NO
5-1/2”
(140mm)
3/4”
(20mm)
15-11/16”
(399mm)
28-5/16”
(720mm)
16-9/16”
(420mm)
6-3/16”
(158mm)
17-1/4”
(438mm)
16-1/8”
(410mm)
6”
(152mm)
1/2” (12mm)
Supply*
5”
(127mm)
12”
(305mm)
28-3/4”
(730mm)
9-13/16”
(250mm)
* Suggested Dimensions
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
#SS-00162 v.05
Printed in U.S.A. | © TOTO USA 05/10 | Printed on recycled paper ƛ
CST794EF
Eco Nexus® Close Coupled Toilet, 1.28GPF
FEATURES
• E-Max® flushing system, low consumption
(1.28GPF/4.8LPF)
• Elongated skirted design
• Universal Height
• Decorative two-piece design with high-profile tank
• Chrome trip lever
• 12" Rough-in
MODELS
• CST794EF
COMPONENTS
• CT794EF
Elongated bowl
• ST794E
Tank and cover only
• ST794ER#01
Tank and cover only, right-hand trip lever
• SS204 SoftClose® seat (sold separately)
• SS114 SoftClose® seat (sold separately)
• SS304 SoftClose® maple seat (sold separately)
COLORS/FINISHES
• Standard
#01 Cotton
#03 Bone
#11 Colonial White
#12 Sedona Beige
#51 Ebony
CODES/STANDARDS
PRODUCT SPECIFICATION
•
The two-piece low consumption E-Max flushing system
toilet shall be 1.28GPF/4.8LPF. Toilet shall have highprofile tank, elongated front bowl and chrome trip
lever. Toilet shall be TOTO Model CST794EF____.
•
•
•
•
Meets and exceeds ASME A112.19.2/CSA B45.1
Certifications: IAPMO(cUPC), EPA Watersense, State
of Massachusetts , City of Los Angeles, and others
Code compliance: UPC, IPC, NSPC, NPC Canada,
and others
Legislative Compliance: California AB715,
California Green Building Code, City of Los
Angeles Water Efficiency Ordinance
ADA compliant (when installed with trip lever
located on the approach side)
CST794EF
Eco Nexus® Close Coupled Toilet, 1.28GPF
SPECIFICATIONS
INSTALLATION NOTES
•
•
•
•
•
•
•
•
•
•
Back-to-Back Toilet Installations:
TOTO recommends the use of a nationally listed,
double sanitary tee-wye only, in vertical waste stacks,
in accordance with the stipulations noted in the
majority of nationally recognized plumbing codes.
•
Water Use
Flush System
Min. Water Pressure
Water Surface
Trap Diameter
Rough-in
Trap Seal
Warranty
Material
Shipping Weight
1.28 GPF/4.8LPF
E-Max®
8 psi (static)
10-1/4" x 8-1/4"
2-1/16"
12"
2-1/4"
One Year Limited Warranty
Vitreous china
CT794EF - 62lbs
ST794E - 36.5lbs
Shipping Dimensions CT794EF
29-3/4"L x 16-1/2"W
x 24-3/4"H
Double Combination Wye / 1/8 Bend
YES
Double Sanitary Tee / Sanitary Cross
NO
ST794E
20-3/8"L x 8-3/8"W
x 19-5/8"H
18-1/2"
(470mm)
5-1/2"
(140mm)
28"
(710mm)
3/4"
(20mm)
14-1/2"
(368mm)
17-7/8" (454mm)
7-1/4" (185mm)
32-1/2"
(824mm)
17-1/8"
(435mm)
1/2" Supply
4-1/2" (114mm)*
12" (305mm)
4" (102mm)*
*Suggested
Dimensions
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
#SS-00366 v.04
Printed in U.S.A. | © TOTO USA 03/10 | Printed on recycled paper ƛ
CST794SF
Nexus® Close Coupled Toilet, 1.6GPF
FEATURES
• G-Max® flushing system, low consumption
(1.6GPF/6.0LPF)
• Elongated skirted design
• Universal Height
• Decorative two-piece design with high-profile tank
• Chrome trip lever
• 12" rough-in
MODELS
• CST794SF
COMPONENTS
• CT794EF
Elongated bowl
• ST794S
Tank and cover only
• ST794SR#01
Tank and cover only, right-hand trip lever
• SS204 SoftClose® seat (sold separately)
• SS114 SoftClose® seat (sold separately)
• SS304 SoftClose® maple seat (sold separately)
COLORS/FINISHES
• Standard
#01 Cotton
#03 Bone
#11 Colonial White
#12 Sedona Beige
#51 Ebony
PRODUCT SPECIFICATION
The two-piece G-Max flushing system toilet shall be
1.6GPF/6.0LPF. Toilet shall be universal height and
ADA compliant. Toilet shall have high-profile tank,
elongated front bowl and chrome trip lever. Toilet shall
be TOTO Model CST794SF____.
CODES/STANDARDS
•
•
•
•
Meets and exceeds ASME A112.19.2/CSA B45.1,
Certifications: IAPMO(cUPC), State of
Massachusetts , City of Los Angeles, and others
Code compliance: UPC, IPC, NSPC, NPC Canada,
and others
ADA compliant (when installed with trip lever
located on the approach side)
CST794SF
Nexus® Close Coupled Toilet, 1.6GPF
SPECIFICATIONS
INSTALLATION NOTES
•
•
•
•
•
•
•
•
•
•
Back-to-Back Toilet Installations:
TOTO recommends the use of a nationally listed,
double sanitary tee-wye only, in vertical waste stacks,
in accordance with the stipulations noted in the
majority of nationally recognized plumbing codes.
•
Water Use
Flush System
Min. Water Pressure
Water Surface
Trap Diameter
Rough-in
Trap Seal
Warranty
Material
Shipping Weight
1.6 GPF/6.0LPF
G-Max®
8 psi (static)
10-1/4" x 8-1/4"
2-1/16"
12"
2-1/4"
One Year Limited Warranty
Vitreous china
CT794EF - 62lbs
ST794S - 36.5lbs
Shipping Dimensions CT794EF
29-3/4"L x 16-1/2"W
x 24-3/4"H
Double Combination Wye / 1/8 Bend
YES
Double Sanitary Tee / Sanitary Cross
NO
ST794S
20-3/8"L x 8-3/8"W
x 19-5/8"H
18-1/2"
(470mm)
5-1/2"
(140mm)
28"
(710mm)
3/4"
(20mm)
14-1/2"
(368mm)
17-7/8" (454mm)
7-1/4" (185mm)
32-1/2"
(824mm)
17-1/8"
(435mm)
1/2" Supply
4-1/2" (114mm)*
12" (305mm)
4" (102mm)*
*Suggested
Dimensions
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
#SS-00164 v.05
Printed in U.S.A. | © TOTO USA 03/10 | Printed on recycled paper ƛ
CT418FG
Aquia® Wall-Hung Dual-Flush Toilet, 1.6GPF & 0.8GPF
FEATURES
• Dual-Max® flushing system, low consumption
(1.6GPF/6.0LPF & 0.8GPF/3.0LPF)
• SanaGloss® ceramic glaze - prevents debris, mold
from sticking to ceramic surfaces, leading to fewer
chemicals and less water in cleaning.
• Universal Height
• Wall-hung toilet can be paired with TOTO in-wall
tank system as well as others
• Can be mounted at standard or ADA height
MODELS
• CT418FG#01
•
•
•
•
SS204 SoftClose® seat (sold separately)
SS114 SoftClose® seat (sold separately)
SC134 commercial seat (sold separately)
SC534 commercial seat (sold separately)
•
WT151M In-wall tank system (pex pipe)
(sold separately)
WT152M In-wall tank system (copper pipe)
(sold separately)
•
COLORS/FINISHES
• Standard
#01 Cotton
PRODUCT SPECIFICATION
CODES/STANDARDS
This universal height, low consumption Dual-Max
flushing system toilet shall be 1.6GPF & 0.8GPF. Toilet
shall have optional SanaGloss ceramic glaze. Toilet
shall be mounted to in-wall tank system, elongated
front bowl and wall-mounted push-button type trip
lever. Toilet can be mounted at ADA height. Toilet
shall be TOTO Model CT418FG#01.
•
•
•
•
•
Meets or exceeds ASME A112.19.2/CSA B45.1,
ASME A112.19.14
Certifications: IAPMO (cUPC), EPA Watersense, State
of Massachusetts , City of Los Angeles, and others
Code compliance: UPC, IPC, NSPC, NPC Canada,
and others
Legislative compliance: California AB715, California
Green Building Code, City of Los Angeles Water
Efficiency Ordinance
ADA compliant
(center mount actuator/trip lever is approach side neutral*)
* consult with your local jurisdiction for special requirements
CT418FG
Aquia® Wall-Hung Dual-Flush Toilet, 1.6GPF & 0.8 GPF
SPECIFICATIONS
•
INSTALLATION NOTES
Water Use
1.6 GPF & 0.8GPF
(6.0 LPF & 3.0LPF)
• Flush System
Dual-flush
• Min. Water Pressure 8 psi (static)
• Water Surface
5.5" X 4.75"
• Trap Diameter
2-1/8"
• Installation Height
15" to 19"
• Trap Seal
2-1/8"
• Warranty
One Year Limited Warranty
• Material
Vitreous china
• Shipping Weight
CT418FG - 66.5lbs
• Shipping Dimensions CT418FG
23-3/4" L X 15-3/4"W
X 17.5" H
Proper Installation
finished wall
Back of toilet even with installation surface.
1/16” Wall gap
Improper Installation
finished wall
Ø Uneven Wall Gap
Baseboard
21-1/16" (535mm)
14-3/16"
(360mm)
1/16" Wall Gap
1-1/8"
(29mm)
15" - 19"
(380mm - 480mm)
3-9/16"
(90mm)
ø2-3/16"
(ø55mm)
ø5-5/16"
(ø135mm)
ø4"
(ø102mm)
7-1/16" (180mm)
1-3/8"
(35mm)
ø1" (ø25mm)
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
# SS-00456 V.02
Printed in U.S.A. | © TOTO USA 12/09 | Printed on recycled paper ƛ
WT151M / WT152M
DuoFit™ In-Wall Tank System, 1.6GPF & 0.9GPF
FEATURES
• Dual-Max flushing system, low consumption
(1.6GPF/6.0LPF & 0.9GPF/3.4LPF)
Avg. flush 1.28GPF
• Adjustable 15"-19" mounting height
• Saves up to 9" of floor space compared to
standard floor-mounted toilet
• Support up to 880lbs
• Commercial 2" x 6" or optional residential installation with 2" x 4" wall studs with waste outlet kit
• 1-pc blow molded polyethylene tank to prevent
leaks
• 2" x 6" Polyethylene outlet included
• Pre-plumbed for optional Washlet® connection
• Complete with #01 Cotton bolt caps
MODELS
• WT151M - with Pex-C washlet supply line
• WT152M - with copper washlet supply line
• WT151800M#WH - with Pex-C washlet supply line
and YT800#WH white push plate
• WT152800M#WH - with copper washlet supply line
and YT800#WH white push plate
•
•
•
•
Optional Push Plates (sold separately)
YT800#WH - White
YT820#SS - Brushed Stainless Steel
YT820#CP - Polished Chrome
YT830#WH- Glass/White
•
•
Optional Outlets (sold separately)
THU343
2" x 4" outlet PVC
THU335
2" x 6" outlet cast iron
• CT418FG Aquia® wall-hung toilet by TOTO
(sold separately)
White
Glass/White
CODES/STANDARDS
•
PRODUCT SPECIFICATION
This universal height, high-efficiency, dual flushing,
in-wall tank system toilet shall be 1.6GPF & 0.9GPF.
Requires TOTO toilet model CT418FG. In-Wall tank
system shall be TOTO Model WT15_________M____.
Brushed Stainless Steel or
Polished Chrome
•
•
Meets and exceeds
o
Carrier system: ASME A112.6.2
o
Tank trim: IAPMO PS50, CSA B125.3,
ASSE1002
Certifications: IAPMO(cUPC), and others
Code compliance: UPC, IPC, NSPC, NPC Canada,
and others
Shall be
WaterSense
certified
WT151M / WT152M
DuoFit™ In-Wall Tank System, 1.6GPF & 0.9 GPF
SPECIFICATIONS
•
•
•
•
•
•
•
•
INSTALLATION NOTES
Water Use
1.6 GPF & 0.9GPF
(6.0 LPF & 3.4LPF)
Flush System
Dual-Max
Min. Water Pressure 8 psi (static)
Installation Height
15" to 19" (projected range)
Warranty
One Year Limited Warranty
Material
Various
Shipping Weight
WT151M / WT152M - 38lbs.
Shipping Dimensions WT151M / WT152M
48" x 26-1/2" x 6"
3-1/2"
3-1/2"
2" x 4"
or 2” x 6"
12.7"
12.7"
16"
16"
2" x 4"
or 2” x 6"
2"
FFL
9" of space saved
over traditional
floor-mounted toilet
10"
19"
1/2" NPT
Water
Supply
2" x 6" installation
with 6" cast-iron drain
Shown with
CT418FG
15"
44-1/2" - 52”
5-1/2"
Finished
Floor
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
# SS-00545 V.02
Printed in U.S.A. | © TOTO USA 12/09 | Printed on recycled paper ƛ
YT830
Round Push Plate - Dual Button
FEATURES
• Push plate with dual buttons that mounts to TOTO
in-wall tank system (WT151M or WT152M)
MODELS
• YT830#WH - Glass with white buttons
SPECIFICATIONS
COLORS/FINISHES
•
•
•
Warranty
Material
Shipping Weight
•
Shipping Dimensions
• #WH - Glass with white buttons
1-year limited warranty
Glass/ABS
1.3lb or
Carton (10pcs.) 14lb.
9-1/4" x 6-1/2" x 1-1/2"
Carton (10pcs.)
16" x 12" x 8"
1/2"
8-3/4"
Push plate shall be model # YT830#WH. Push plate
shall be glass with 2 white actuators on the front. Push
plate shall be mounted to in-wall tank system WT151M
or WT152M.
6"
PRODUCT SPECIFICATION
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
# SS-00622 v.01
Printed in U.S.A. | © TOTO USA 08h/10 | Printed on recycled paper ƛ
YT820
Convex Push Plate - Dual Button
FEATURES
• Push plate with dual buttons that mounts to TOTO
in-wall tank system (WT151M or WT152M)
• Push plate in brushed stainless steel or polished
chrome is robust and vandal-proof. A hidden
mounting screw protects against theft.
MODELS
• YT820#SS - Brushed Stainless Steel
• YT820#CP - Polished Chrome
SPECIFICATIONS
COLORS/FINISHES
•
•
•
Warranty
Material
Shipping Weight
•
Shipping Dimensions
• #SS - Brushed Stainless Steel
• #CP - Polished Chrome
1-year limited warranty
Metal/ABS
1.2lb or
Carton (10pcs.) 13lb.
9-1/4" x 6-1/2" x 1-1/2"
Carton (10pcs.)
16" x 12" x 8"
5/8"
5-5/8"
8-1/2"
PRODUCT SPECIFICATION
Push plate shall be model # YT820#____ Push plate
shall be either staineless steel or polished chrome with
2 actuators on the front. Push plate shall be mounted
to in-wall tank system WT151M or WT152M.
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
# SS-00621 v.01
Printed in U.S.A. | © TOTO USA 08h/10 | Printed on recycled paper ƛ
YT800#WH
Rectangle Push Plate - Dual Button
FEATURES
• Push plate with dual buttons that mounts to TOTO
in-wall tank system (WT151M or WT152M)
MODELS
• YT800#WH - White plastic
SPECIFICATIONS
COLORS/FINISHES
• Standard
#WH - White
•
•
•
Warranty
Material
Shipping Weight
•
Shipping Dimensions
1-year limited warranty
ABS
0.6lb or
Carton (10pcs.) 7lb.
9-1/4" x 6-1/2" x 1-1/2"
Carton (10pcs.)
16" x 12" x 8"
3/4"
8-1/2"
Push plate shall be model # YT800#WH. Push plate
shall be solid plastic with 2 actuators on the front. Push
plate shall be mounted to in-wall tank system WT151M
or WT152M.
5-3/4"
PRODUCT SPECIFICATION
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
# SS-00620 v.01
Printed in U.S.A. | © TOTO USA 08h/10 | Printed on recycled paper ƛ
SC134
Commercial Seat
FEATURES
• Elongated closed front toilet seat and cover
• Mounting hardware included
MODELS
• SC134
SPECIFICATIONS
•
•
•
•
COLORS/FINISHES
• #01 Cotton
Warranty
Material
Shipping Weight
Shipping Dimensions
1-year limited warranty
Polypropylene
6 lbs.
18-1/2" x 14-1/2" x 3"
5-1/2”
(140mm)
PRODUCT SPECIFICATION
Seat shall be model # SC134______ Seat shall be
solid plastic with open front seat. Seat shall have
integral bumpers. Hinges to be color matched with
noncorrosive nylon stud and nut.
18-3/8”
(467mm)
PLEASE NOTE:
Cannot be installed with the following models:
MS874114S(G), MS884114, MS914114, MS904114,
CST774S, CST804S, CST414M, CST416M, CST464MF,
CST412MF, & CST412MF.10, CT418FG.
4”
(102mm)
8-5/8”
(219mm)
14-1/2”
(368mm)
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
# SS-00341 v.03
Printed in U.S.A. | © TOTO USA 07/10 | Printed on recycled paper ƛ
SC534
Commercial Seat
FEATURES
• Elongated closed front toilet seat
• Mounting hardware included
MODELS
• SC534
SPECIFICATIONS
•
•
•
•
COLORS/FINISHES
• #01 Cotton
PRODUCT SPECIFICATION
Warranty
Material
Shipping Weight
Shipping Dimensions
1-year limited warranty
Polypropylene
6 lbs.
18-1/2" x 14-1/2" x 3"
5-1/2”
(140mm)
Seat shall be model # SC534______ Seat shall be
solid plastic with open front seat. Seat shall have
integral bumpers. Hinges to be color matched with
noncorrosive nylon stud and nut.
PLEASE NOTE:
18-5/8”
(473mm)
Cannot be installed with the following models:
MS874114S(G), MS884114, MS914114, MS904114,
CST774S, CST804S, CST414M, CST416M, CST464MF,
CST412MF, & CST412MF.10, CT418FG.
14-3/4”
(375mm)
3-3/4”
(95mm)
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
# SS-00340 v.03
Printed in U.S.A. | © TOTO USA 07/10 | Printed on recycled paper ƛ
UE930
Lloyd® Urinal
FEATURES
• Compact urinal with concealed integral trap
• Washout flush action
• Top spud inlet
• Can be mounted at ADA compliant height
MODELS
• UE930#01
Lloyd urinal and electronic flush valve
COMPONENTS
• UT930
Lloyd urinal only
• TEY1DNC-42
Lloyd electronic flush valve only,
1.0GPF or less
COLORS/FINISHES
• Standard
#01 Cotton
CODES/STANDARDS
•
•
PRODUCT SPECIFICATION
Urinal shall be made of vitreous china. The wallmounted, ADA compliant, washout urinal shall
be 1.0GPF or less when paired with TEY1DNC-42
flushometer valve. Urinal specified shall be model
UE930________.
•
•
•
Meets and exceeds ASME A112.19.2/CSA B45.1,
Certifications: IAPMO(cUPC), State of
Massachusetts , City of Los Angeles
Code compliance: UPC, IPC, NSPC, NPC Canada,
and others
Legislative compliance: California AB715, California
Green Building Code
ADA compliant
UE930
Lloyd® Urinal
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
Water Use
Flush System
Warranty
Material
Min. Water Pressure
Height (Urinal Only)
Width
Rim
Shipping Weight
Shipping Dimensions
INSTALLATION NOTES
0.5GPF - 1.0LPF
Spreader nozzle
One Year Limited Warranty
Vitreous china
15 psi (flowing)
29-1/4"
16-1/2"
14"
UE930 - 57.3lbs
UE930
30-5/16" L x 15-1/8"
W x 17-3/4" H
16-1/2" (420mm)
9-1/2" (246mm)
4-1/4" (108mm)
2-1/2" (63mm)
11"
(280mm)
1"
(25mm)
6-1/2"
(165mm)
37-3/4"
(960mm)
Outlet 2"
(51mm)
I.P.S
4-3/4"
(120mm)
19-1/2"
(495mm)
Recommended Carrier:
Jay R. Smith 0636 (Wall Hanger)
0637 (Wall Hanger with bottom)
5/8" Spud
(16mm)
5-1/8"
(131mm)
6"
(150mm)
10-1/8" (258mm)
42"
(1068mm)
16-3/8"
(415mm)
29-1/4"
(744mm)
24"
14" (356mm) (610mm)
6"
(152mm)
Outlet Detail
19-1/2"
(495mm)
*Suggested Dimensions
6" (152mm )
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
# SS-00260 v.02
Printed in U.S.A. | © TOTO USA 04/10 | Printed on recycled paper ƛ
UT447E(V)
0.5GPF Low Consumption Washout Urinal
FEATURES
• Compact urinal with concealed integral trap
• Washout flush action with 3/4" top or back spud
inlet
• 0.5 GPF with any flush valve shown below
MODELS
• UT447E
Urinal with 3/4" top spud inlet
• UT447EV
Urinal with 3/4" back spud inlet
ADDITIONAL ITEMS (sold separately)
• THU3017
Stainless Steel Urinal Drain Cover
RECOMMENDED FLUSH VALVES
UT447E
UT447EV
EcoPower
Manual
EcoPower®
TEU1LN12#CP
TMU1LN12#CP
TEU2LN11#SS
®
TEU3LN11#SS
COLORS/FINISHES
UT447E
UT447EV
• Standard
#01 Cotton
#03 Bone
#12 Sedona Beige
PRODUCT SPECIFICATION
CODES/STANDARDS
The wall-mounted, ADA compliant, low consumption
washout urinal shall be 0.5GPF/1.9LPF when paired
with a 0.5GPF flushometer valve and 1.0GPF/3.8LPF
when paired with 1.0GPF/3.8LPF flushometer valve.
Urinal specified shall be model UT447E___________.
•
•
•
•
•
Meets and exceeds ASME A112.19.2/CSA B45.1,
Certifications: IAPMO(cUPC), State of
Massachusetts , City of Los Angeles
Code compliance: UPC, IPC, NSPC, NPC Canada,
and others
Legislative compliance: California AB715, California
Green Building Code
ADA compliant
UT447E(V)
0.5GPF Low Consumption Washout Urinal
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
Water Use
Flush System
Warranty
Material
Min. Water Pressure
Height (Urinal Only)
Width
Rim
Shipping Weight
Shipping Dimensions
0.5GPF/1.9LPF
Washout flush action
One Year Limited Warranty
Vitreous china
15 psi (flowing)
27-3/16"
18"
14"
UT447E(V) - 60lbs
UT447E(V)
29-7/8" L x 16-3/4"
W x 19-1/8" H
UT447E
UT447EV
3/4" (19mm)
I.P.S. Supply
3/4"
(19mm)
Spud
Wall
Brackets
11-1/2"
(292mm)
12" (305mm)
3/4"
(19mm)
Spud
Wall
Brackets
2-1/2"
(63.5mm)
2-1/2"
(63.5mm)
4-3/4"
(121mm)
Wall
Brackets
Wall
Brackets
17-1/8"
(436mm)
16-11/16"
(424mm)
18"
(457mm)
17-1/8"
(436mm)
27"
(685mm)
Outlet
2" (51mm)
I.P.S.
16-11/16"
(424mm)
Outlet
2" (51mm)
I.P.S.
9-1/4"
(235mm)
14" (356mm)
Outlet Detail
17"*
(432mm)
6"
(152mm)
12-1/4"*
(311mm)
17-1/2"
(444mm)
18"
(457mm)
27"
(685mm)
17"*
(432mm)
9-1/4"
(235mm)
14" (356mm)
Outlet Detail
Finished Floor Line
6" (152mm)
12" (305mm)
12-1/4"*
(311mm)
6"
(152mm)
17-1/2"
(444mm)
Finished Floor Line
6" (152mm)
*For ADA installation refer to local codes
*For ADA installation refer to local codes
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
# SS-00256 v.04
Printed in U.S.A. | © TOTO USA 08/10 | Printed on recycled paper ƛ
UT104E(V)
0.5GPF Low Consumption Washout Urinal
FEATURES
• 0.5GPF
• Compact urinal with concealed integral trap
• Washout flush action with 3/4" top or back spud
inlet
MODELS
• UT104E
Urinal with 3/4" top spud inlet
• UT104EV
Urinal with 3/4" back spud inlet
ADDITIONAL ITEMS (sold separately)
• THU3010
Stainless Steel Urinal Drain Cover
RECOMMENDED FLUSH VALVES
UT104E
UT104EV
EcoPower
Manual
EcoPower®
TEU1LN12#CP
TMU1LN12#CP
TEU2LN11#SS
®
TEU3LN11#SS
UT104E
UT104EV
COLORS/FINISHES
• Standard
#01 Cotton
#03 Bone
#12 Sedona Beige
CODES/STANDARDS
PRODUCT SPECIFICATION
•
The wall-mounted, ADA compliant, low consumption
washout urinal shall be 0.5GPF/1.9LPF when paired
with a 0.5GPF flushometer valve and 1.0GPF/3.8LPF
when paired with 1.0GPF/3.8LPF flushometer valve.
Urinal specified shall be model UT104E________.
•
•
•
•
Meets and exceeds ASME A112.19.2/CSA B45.1,
Certifications: IAPMO(cUPC), State of
Massachusetts , City of Los Angeles
Code compliance: UPC, IPC, NSPC, NPC Canada,
and others
Legislative compliance: California AB715, California
Green Building Code
ADA compliant
UT104E(V)
0.5GPF Low Consumption Washout Urinal
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
Water Use
Flush System
Warranty
Material
Min. Water Pressure
Height (Urinal Only)
Width
Rim
Shipping Weight
Shipping Dimensions
0.5GPF/1.9LPF
Washout flush action
One Year Limited Warranty
Vitreous china
15 psi (flowing)
21-3/4"
13"
14"
UT104E(V) - 34.5lbs
UT104E(V)
24" L x 13-3/4" W x 15-1/8" H
UT104E
UT104EV
3/4" (19mm) I.P.S. Supply for
Flushometer Valve
2-1/2"
(61mm)
4-3/4"
(121mm)
13"
(330mm)
9-7/8"
(250mm)
14"
(356mm)
14"
(356mm)
11-1/2"
(292mm)
12-3/8"
(315mm)
3/4"
(19mm)
Spud
3/4" (19mm)
Spud
21-3/4"
(552mm)
10-3/4"
(273mm)
2"
(51mm)
I.P.
Inside
Threads
12-3/8"
(315mm)
21-3/4"
(552mm)
10-3/4"
(273mm)
17"
(432mm)
12-1/2"
(318mm)
13"
(330mm)
9-7/8"
(250mm)
1-1/2"
(40mm)
17"
(432mm)
12-1/2"
(318mm)
4-1/4"
(108mm)
4-1/4"
(108mm)
2"
(51mm)
I.P.
Inside
Threads
4-1/4"
(108mm)
4-1/4"
(108mm)
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
# SS-00258 v.02
Printed in U.S.A. | © TOTO USA 06/09 | Printed on recycled paper ƛ
LT502
Self-Rimming Lavatory
FEATURES
• 19" diameter
• Vitreous china
• ADA compliant
• Concealed front overflow
• Complete with installation template and sealing
compound
MODELS
• LT502
Lavatory only with single hole faucet center
• LT502.4
Lavatory only with 4" faucet centers
• LT502.8
Lavatory only with 8" faucet centers
COLORS/FINISHES
• Standard
#01 Cotton
#03 Bone
#12 Sedona Beige
CODES/STANDARDS
•
•
•
•
Meets and exceeds ASME A112.19.2/CSA B45.1
Certifications: IAPMO(cUPC), State of
Massachusetts , City of Los Angeles, and others
ADA compliant
Code compliance: UPC, IPC, NSPC, NPC Canada,
and others
PRODUCT SPECIFICATION
The self-rimming lavatory shall be made of vitreous
china. Lavatory shall be 19" in diameter. Product
shall be with front overflow and lavatory shall include
mounting assembly and be ADA compliant. Lavatory
shall be TOTO Model LT502_________.
LT502
Self-Rimming Lavatory
SPECIFICATIONS
•
•
•
•
•
•
•
Waste
Size
Basin
Warranty
Material
Shipping Weight
Shipping Dimensions
1-1/4" O.D.
19" diameter
14-7/8"W x 12-12"D
One Year Limited Warranty
Vitreous china
21 lbs.
20-1/2"L x 20-1/2"W x
10-3/8"H
8"
(203mm)
3-3/8"
(84mm)
2-3/4"(70mm)
7-1/8"
(180mm)
19"
(483mm)
12-1/2"
(317mm)
ADA Compliance Check
14-7/8" (380mm)
19" (483mm)
1-1/8" (28mm)
8-1/2"
(215mm)
*14"
(355mm)
8"
(203mm)
*13"
(330mm)
*8" (203mm)
34"
(864mm)
SUPPLIES
*31"
(787mm)
6"
(152mm)
27"
(686mm)
1-1/4" O.D. WASTE
18"
(457mm)
9"
(229mm)
17"
(432mm)
*Suggested Dimension
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
#SS-00228 v.03
Printed in U.S.A. | © TOTO LTD. 07/09 | Printed on recycled paper ƛ
LT501
Self-Rimming Lavatory
FEATURES
• 20" x 17"
• Vitreous china
• ADA compliant
• Concealed front overflow
• Complete with installation template and sealing
compound
MODELS
• LT501
Lavatory only with single hole faucet center
• LT501.4
Lavatory only with 4" faucet centers
• LT501.8
Lavatory only with 8" faucet centers
COLORS/FINISHES
• Standard
#01 Cotton
#03 Bone
#12 Sedona Beige
CODES/STANDARDS
•
•
•
•
Meets and exceeds ASME A112.19.2/CSA B45.1
Certifications: IAPMO(cUPC), State of
Massachusetts , City of Los Angeles, and others
ADA compliant
Code compliance: UPC, IPC, NSPC, NPC Canada,
and others
PRODUCT SPECIFICATION
The self-rimming lavatory shall be made of vitreous
china. Lavatory shall be 20" x 17". Product shall be
with front overflow and lavatory shall include mounting
assembly and be ADA compliant. Lavatory shall be
TOTO Model LT501_________.
LT501
Self-Rimming Lavatory
SPECIFICATIONS
•
•
•
•
•
•
•
Waste
Size
Basin
Warranty
Material
Shipping Weight
Shipping Dimensions
1-1/4" O.D.
20"W x 17"D
15-1/4"W x 11-1/8"D
One Year Limited Warranty
Vitreous china
20 lbs.
21-5/8"L x 19-1/8"W x
10-3/8"H
center faucet hole: 1-1/4" / 31mm
4" and 8" faucet hole: 1-3/8" / 35mm
8"
(203mm)
2-5/8"
(67mm)
2-1/8"(53mm)
6-5/8"
(168mm)
17"
(432mm)
11-1/8"
(283mm)
ADA Compliance Check
14-5/8" (372mm)
20" (508mm)
1" (25mm)
8-1/4"
(210mm)
*13"
(330mm)
*14"
(355mm)
8"
(203mm)
*8" (203mm)
34"
(864mm)
SUPPLIES
*31"
(787mm)
6"
(152mm)
27"
(686mm)
1-1/4" O.D. WASTE
18"
(457mm)
9"
(229mm)
17"
(432mm)
*Suggested Dimension
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
# SS-00329 v.04
Printed in U.S.A. | © TOTO LTD. 07/09 | Printed on recycled paper ƛ
LT402
Self-Rimming Lavatory
FEATURES
• 19-1/2" diameter
• Vitreous china
• ADA compliant
• Concealed front overflow
• Complete with installation template and sealing
compound
MODELS
• LT402#01
Lavatory only with single hole faucet center
• LT402.4#01
Lavatory only with 4" faucet centers
• LT402.8#01
Lavatory only with 8" faucet centers
COLORS/FINISHES
• Standard
#01 Cotton
CODES/STANDARDS
•
•
•
•
Meets and exceeds ASME A112.19.2/CSA B45.1
Certifications: IAPMO(cUPC), State of
Massachusetts , City of Los Angeles, and others
ADA compliant
Code compliance: UPC, IPC, NSPC, NPC Canada,
and others
PRODUCT SPECIFICATION
The self-rimming lavatory shall be made of vitreous
china. Lavatory shall be 19-1/2" in diameter. Product
shall be with front overflow and lavatory shall include
mounting assembly and be ADA compliant. Lavatory
shall be TOTO Model LT402_________.
LT402
Self-Rimming Lavatory
SPECIFICATIONS
•
•
•
•
•
•
•
Waste
Size
Basin
Warranty
Material
Shipping Weight
Shipping Dimensions
1-1/4" O.D.
19-1/2"diameter
14-1/4"W x 14"D
One Year Limited Warranty
Vitreous china
20-1/2 lbs.
19-5/8"L x 19-5/8"W x
9-1/2"H
2-1/2" (64mm)
4" (102mm)
7-1/4"
(184mm)
19-1/2"
(495mm)
14-1/4"
(362mm)
ADA Compliance Check
14" (356mm)
19-1/2" (495mm)
1/2" (13mm)
8"
(203mm)
8-1/4"
(210mm)
*13"
(330mm)
*14"
(356mm)
8" (203mm)
34"
(864mm)
*31"
(787mm)
Supplies
6"
(152mm)
27"
(686mm)
18"
(457mm)
1-1/4" O.D. Waste
9"
(229mm)
17"
(432mm)
*Suggested dimension
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
# SS-00330 v.04
Printed in U.S.A. | © TOTO LTD. 07/09 | Printed on recycled paper ƛ
LT401
Self-Rimming Lavatory
FEATURES
• 17-3/4" x 20-3/4"
• Vitreous china
• ADA compliant
• Concealed front overflow
• Complete with installation template and sealing
compound
MODELS
• LT401
Lavatory only, with single hole faucet center
• LT401.4
Lavatory only with 4" faucet centers
• LT401.8
Lavatory only with 8" faucet centers
COLORS/FINISHES
• Standard
#01 Cotton
#03 Bone
#12 Sedona Beige
CODES/STANDARDS
•
•
•
•
Meets and exceeds ASME A112.19.2/CSA B45.1
Certifications: IAPMO(cUPC), State of
Massachusetts , City of Los Angeles, and others
ADA compliant
Code compliance: UPC, IPC, NSPC, NPC Canada,
and others
PRODUCT SPECIFICATION
The self-rimming lavatory shall be made of vitreous
china. Lavatory shall be 20-3/4" x 17-3/4". Product
shall be with front overflow and lavatory shall include
mounting assembly and be ADA compliant. Lavatory
shall be TOTO Model LT501_________.
LT401
Self-Rimming Lavatory
SPECIFICATIONS
•
•
•
•
•
•
Waste
Size
Basin
Warranty
Material
Shipping Weight
•
Shipping Dimensions
4" (102mm)
1-1/4" O.D.
20-3/8"W x 17-3/4"D
15-1/2"W x 11"D
One Year Limited Warranty
Vitreous china
LT401/LT401.4/LT401.8
21-1/2 lbs.
LT401/LT401.4/LT401.8
21-1/4"L x 18-1/4"W x
9-1/2"H
2" (51mm)
6-3/4"
(172mm)
17-3/4"
(450mm)
11-1/4"
(286mm)
ADA Compliance Check
15-1/2" (394mm)
20-3/8" (518mm)
1/2" (13mm)
8"
(203mm)
8-1/4"
(210mm) *13"
(330mm)
*14"
(356mm)
8" (203mm)
34"
(864mm)
*34"
(864mm)
Supplies
6"
(152mm)
27"
(686mm)
18"
(457mm)
1-1/4" O.D. Waste
9"
(229mm)
17"
(432mm)
*Suggested dimension
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
#SS-00331 v.03
Printed in U.S.A. | © TOTO LTD. 07/09 | Printed on recycled paper ƛ
LT587
Undercounter Lavatory
FEATURES
UÊÊÊ £™¸ÊÝÊ£x¸
UÊÊÊ 6ˆÌÀiœÕÃÊV…ˆ˜>
UÊ ÊVœ“«ˆ>˜Ì
UÊÊÊ œ˜Vi>i`ÊvÀœ˜ÌʜÛiÀyœÜ
UÊÊÊ œÕ˜Ìˆ˜}Ê>ÃÃi“LÞÊVœ“«iÌiÊ܈̅ʈ˜ÃÌ>>̈œ˜Ê
Ìi“«>Ìi]ʓœÕ˜Ìˆ˜}ÊÃVÀiÜÊÃiÌÊ>˜`ÊÃi>ˆ˜}Ê
Vœ“«œÕ˜`
MODELS
UÊÊÊ /xnÇ
Ê ­›ä£]ʛäÎ]ʛ£Ó®
COLORS/FINISHES
UÊÊÊ -Ì>˜`>À`
Ê ›ä£Ê
œÌ̜˜
Ê ›äÎʜ˜i
Ê ›£ÓÊ-i`œ˜>Êiˆ}i
CODES/STANDARDS
UÊ iiÌÃÊ>˜`ÊiÝVii`ÃÊ-Ê££Ó°£™°ÓÉ
-Ê{x°£
UÊ iÀ̈wV>̈œ˜Ã\Ê*"­V1*
®]Ê-Ì>ÌiʜvÊ
>ÃÃ>V…ÕÃiÌÌÃÊ]Ê
ˆÌÞʜvʜÃʘ}iiÃ]Ê>˜`ʜ̅iÀÃ
UÊÊÊ iiÌÃÊÊ}Ո`iˆ˜iÃÊ>˜`Ê -Ê££Ç°£Ê
ÀiµÕˆÀi“i˜ÌÃÊ܅i˜ÊVœÕ˜ÌiÀ̜«ÊˆÃʈ˜ÃÌ>i`ÊnÈ{““Ê
­Î{¸®ÊvÀœ“Êw˜ˆÃ…i`ÊyœœÀÊ>˜`ʏ>Û>̜ÀÞʈÃʈ˜ÃÌ>i`Ê
În““Ê­£‡£ÉÓ¸®Ê“ˆ˜ˆ“Õ“ÊvÀœ“ÊvÀœ˜ÌÊi`}i°
PRODUCT SPECIFICATION
/…iÊ՘`iÀVœÕ˜ÌiÀʏ>Û>̜ÀÞÊÅ>ÊLiʓ>`iʜvÊۈÌÀiœÕÃÊ
V…ˆ˜>°Ê>Û>̜ÀÞÊÅ>ÊLiÊ£™¸ˆ˜Êi˜}̅Ê>˜`Ê£x¸Êˆ˜Ê
܈`̅°Ê*Àœ`ÕVÌÊÅ>ÊLiÊ܈̅ʜÛiÀyœÜÊ>˜`ʏ>Û>̜ÀÞÊ
Å>Êˆ˜VÕ`iʓœÕ˜Ìˆ˜}Ê>ÃÃi“LÞ°Ê>Û>̜ÀÞÊÅ>ÊLiÊ
ÊVœ“«ˆ>˜Ì°Ê>Û>̜ÀÞÊÅ>ÊLiÊ/"/"ʜ`iÊ
/xnÇÚÚÚÚÚÚ°
LT587
Undercounter Lavatory
SPECIFICATIONS
INSTALLATION NOTES
UÊÊÊ 7>ÃÌiÊ
UÊÊÊ -ˆâiÊÊ
UÊÊÊ >ȘÊ
UÊÊÊ 7>ÀÀ>˜ÌÞÊ
UÊÊÊ >ÌiÀˆ>Ê
UÊÊÊ -…ˆ««ˆ˜}Ê7iˆ}…ÌÊÊ
UÊÊÊ -…ˆ««ˆ˜}ʈ“i˜Ãˆœ˜ÃÊÊ
£‡£É{¸Ê"°°
Ó£‡£É{¸7ÊÝʣLJ£É{¸
£™¸7ÊÝÊ£x¸
"˜iÊ9i>Àʈ“ˆÌi`Ê7>ÀÀ>˜ÌÞ
6ˆÌÀiœÕÃÊV…ˆ˜>
£™°xʏLð
£n‡£ÉÓ¸ÊÝÊÓÓ¸7ÊÝÊn‡£Én¸
1-1/8"
(28mm)
*2-1/2" (63mm)
2-5/8"
(68mm)
*5-1/8" (131mm)
Ê
œ“«ˆ>˜ViÊ
…iVŽ
15"
(381mm)
14"
(355mm)
24” (610mm)
17-1/4” (437mm)
1-1/2”
(37mm)
1-1/8" (28mm)
19" (483mm)
1-1/8" (28mm)
1-1/8" (28mm)
18" (457mm)
1/4” (50mm)
1/2" (12mm)
*12"
(305mm)
7-1/2"
(191mm)
34”
(864mm)
*13-1/8"
(333mm)
*8" (203mm)
27”
(686mm)
6”
(152mm)
9”
(229mm)
*Suggested Dimension
17”
(432mm)
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
#SS-00332 v.03
Printed in U.S.A. | © TOTO LTD. 07/10 | Printed on recycled paper !
LT569
Undercounter Lavatory
FEATURES
•
•
•
•
•
17" x 14"
Vitreous china
ADA compliant
Concealed front overflow
Mounting assembly complete with installation
template, mounting screw set and sealing
compound
MODELS
• LT569
(#01, #03, #12)
COLORS/FINISHES
• Standard
#01 Cotton
#03 Bone
#12 Sedona Beige
CODES/STANDARDS
•
•
Meets and exceeds ASME A112.19.2/CSA B45.1
Certifications: IAPMO(cUPC), State of
Massachusetts , City of Los Angeles, and others
• Meets ADA guidelines and ANSI A117.1
requirements when countertop is installed 864mm
(34") from finished floor and lavatory is installed
205mm (8-1/8") minimum from front edge.
PRODUCT SPECIFICATION
The undercounter lavatory shall be made of vitreous
china. Lavatory shall be 17"in length and 11" in
width. Product shall be with overflow and lavatory
shall include mounting assembly. Lavatory shall be
ADA compliant. Lavatory shall be TOTO Model
LT569______.
LT569
Undercounter Lavatory
SPECIFICATIONS
•
•
•
•
•
•
•
Waste
Size
Basin
Warranty
Material
Shipping Weight
Shipping Dimensions
INSTALLATION NOTES
1-1/4" O.D.
19-1/4"W x 16-1/4"D
17"W x 14"D
One Year Limited Warranty
Vitreous china
17.4 lbs.
22"W x 8-1/2"H x 18-1/2"L
1-1/8" (28mm)
2-1/2" (63mm)
5-1/8"
(131mm)
2-5/8"
(68mm)
14"
(355mm)
13"
(329mm)
ADA Compliance Check
1-1/8" (28mm)
17" (432mm)
1-1/8" (28mm)
1-1/8" (28mm)
16" (406mm)
1/2" (12mm)
*12"
(305mm)
7-1/2"
(191mm)
*13-1/8"
(333mm)
8"
(203mm)
34"
(864mm)
*8" (203mm)
6"
(152mm)
27"
(686mm)
18"
(457mm)
*Suggested Dimension
9"
(229mm)
17"
(432mm)
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
# SS-00333 v.03
Printed in U.S.A. | © TOTO LTD. 07/09 | Printed on recycled paper ƛ
LT308
Wheelchair Users Lavatory
FEATURES
•
•
•
•
•
20-1/2" x 27"
Vitreous china
ADA compliant
Punching for concealed arm carrier
No hardware included
MODELS
• LT308
Lavatory only, with single hole
• LT308.4
Lavatory only with 4" faucet centers
• LT308.11
Lavatory only with 11" faucet centers
• LT308A
Lavatory only with single hole. Right side soap hole
• LT308.4A
Lavatory only with 4" faucet centers. Right side
soap hole
• LT308.11A
Lavatory only with 11" faucet centers. Right side
soap hole.
COLORS/FINISHES
• Standard
#01 Cotton
#03 Bone
#12 Sedona Beige
PRODUCT SPECIFICATION
The wall-mount lavatory shall be made of vitreous
china. Lavatory shall be 20-1/2"in length and 27" in
width. Product shall be with front overflow and lavatory
shall include mounting assembly. Lavatory shall be
ADA compliant. Lavatory shall be TOTO Model
LT308______.
CODES/STANDARDS
•
•
•
•
Meets and exceeds ASME A112.19.2/CSA B45.1,
Certifications: IAPMO(cUPC), State of
Massachusetts , City of Los Angeles, and others
ADA compliant
Code compliance: UPC, IPC, NSPC, NPC Canada,
and others
LT308
Wheelchair Users Lavatory
SPECIFICATIONS
•
•
•
•
•
•
Waste
Size
Basin
Warranty
Material
Shipping Weight
•
Shipping Dimensions
INSTALLATION NOTES
1-1/4" O.D.
20-1/2"W x 27"D
15-1/8"W x 14-3/4"D
One Year Limited Warranty
Vitreous china
LT308/LT308.4/LT308.11
56 lbs.
LT308/LT308.4/LT308.11
29-1/8"L x 22-7/8"W x
10-5/8"H
TOTO recommends the use of Jay R. Smith 0700 (- 27 M31) (Concealed Arms) or equal.
20-1/2" (520mm)
4"
(102mm)
7-1/8"
(182mm)
3-3/8"
(85mm)
6-3/8"
(161mm)
8-1/4"
(209mm)
27"
6-7/8" (687mm)
(174mm)
15-1/8"
(384mm)
14-3/4"
(375mm)
16-1/8" (410mm)
2-3/4"
(70mm)
ø2-5/32"
(ø55mm)
8-1/8"
(205mm)
*8" (203mm)
SUPPLIES
*10-3/4"
(272mm)
ø3/8"
(ø11mm)
1-1/4" O.D. WASTE
17-3/8" (440mm)
*32"-34"
(813-864mm)
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
#SS-00335 v.04
Printed in U.S.A. | © TOTO LTD. 07/09 | Printed on recycled paper ƛ
LT307(A)
Commercial Wall-Hung Lavatory
FEATURES
•
•
•
•
•
•
•
21" x 18-1/4" lavatory with back splash
Vitreous china
ADA compliant
Punching for concealed arm carrier
Includes wall hanger
Punching for concealed arm carriers
Soap dispenser hole
MODELS
• LT307
Lavatory only, with single hole
• LT307.4
Lavatory only with 4" faucet centers
CODES/STANDARDS
• LT307.8
Lavatory only with 8" faucet centers
•
•
• LT307A#01 (Cotton only)
Lavatory only with single hole. Side soap hole
•
•
COLORS/FINISHES
• Standard
#01 Cotton
#03 Bone
#12 Sedona Beige
PRODUCT SPECIFICATION
The lavatory shall be 21" width and 18-1/4" depth.
The basin shall be 14-15/16" width by 10-3/8" depth.
The lavatory shall be made of vitreous china and
can be installed at ADA height with rear overflow.
TOTO model number LT307A#01 shall be drilled
for soap dispenser. Lavatory shall be TOTO model
LT307_______.
Meets and exceeds ASME A112.19.2/CSA B45.1,
Certifications: IAPMO(cUPC), State of
Massachusetts , City of Los Angeles, and others
ADA compliant
Code compliance: UPC, IPC, NSPC, NPC Canada,
and others
LT307(A)
Commercial Wall-Hung Lavatory
SPECIFICATIONS
•
•
•
•
•
•
INSTALLATION NOTES
Waste
Size
Warranty
Material
Shipping Weight
Shipping Dimensions
1-1/4" O.D.
21"W x 18-1/4"D
One Year Limited Warranty
Vitreous china
40 lbs.
22-5/8"L x 19-1/8"W x
13-3/4"H
3-15/16″
(100mm)
TOTO recommends the use of Jay R. Smith 0700
(Concealed Arms) with 19" arms 0800 (Wall Support
Plate).
21″
(533mm)
3-3/8″ (86mm)
1-3/4″ (44mm)
18-1/4″
(464mm)
17-1/2″
(191mm)
10-3/8″
(264mm)
14-15/16″
(380mm)
19-1/2″
(496mm)
9-5/58" (244mm)
7-1/8" (181mm)
*10-3/4″
(273mm)
4-1/2" (114mm)
*8-3/4″
(222mm)
SUPPLIES
1 1/4" WASTE OUTLET
33-11/16″
(856mm)
6-5/16" (160mm)
8″
(203mm)
* SUGGESTED DIMENSION
10-1/2" (267mm)
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
# SS-00336 v.04
Printed in U.S.A. | © TOTO LTD. 07/09 | Printed on recycled paper ƛ
TMU1LN Series
Non-Hold Open High-Efficiency Urinal Flushometer Valve - 0.5 gpf
FEATURES
• Manual operated, non-hold open, urinal
flushometer valve complete with 3/4” angle stop
and 3/4” or 1-1/4" vacuum breaker set
• Piston valve action with 0.5 gpf
• Left/right rough-in
MODELS
• TMU1LN#CP
Valve only, Right/Left hand rough
• TMU1LN12#CP (3/4" Vacuum breaker)
Right/Left hand rough
• Complete set supplied with:
Vacuum breaker & angle stop set – VB9CP-12
• 3/4” Angle stop – 10077t4
• 3/4” Vacuum breaker – 10075t2
• Spud nut & escutcheon – 71051Nt5
• Sweat solder kit – TH559EDVSJ1
• TMU1LN22#CP (1-1/4" Vacuum breaker)
Right/Left hand rough
• Complete set supplied with:
Vacuum breaker & angle stop set – VB9CP-22
• 3/4” Angle stop – 10077t4
• 1-1/4” Vacuum breaker – 10075t5
• Spud nut & escutcheon – 71051Nt7
• Sweat solder kit – TH559EDVSJ1
• Optional Part:
Z-4000-J - Adapter for ground joint angle stops
COLORS/FINISHES
• #CP Polished Chrome
CODES/STANDARDS
•
•
•
•
Meets or exceeds ASSE 1037, CSA B125.3
Certifications: IAPMO(cUPC), ASSE, State of
Massachusetts, City of Los Angeles, and others
Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others
ADA compliant
PRODUCT SPECIFICATION
TOTO® Model No. _____________________________
Manual type urinal flushometer valve, non-hold-open
piston type with, self-cleaning debris screen and
precise flushing capability. Low consumption water of
0.5 gpf/1.9 lpf model. Accessories to include angle
stop with check valve, vacuum breaker. Sweat solder
kit, spud nut and escutcheon.
TMU1LN Series
Non-Hold Open Urinal Flushometer Valve - 0.5 gpf
SPECIFICATIONS
•
•
Warranty
Material
Three Year Warranty
Bronze casting with
polished chrome finish
• Water Supply
3/4" NPT
• Fixture type
Low consumption urinal
0.5 gpf / 1.9 lpf flushometer type
• Supply water pressure 15 psi - 100 psi*
These specifications are subject to change without notice.
*Water pressures over 80 psi are not recommended for most plumbing fixtures.
Check your local plumbing code for details.
MINIMUM
2-1/4”
3/4” Inlet supply
4-3/4”*
1-1/2” NPSM
11-1/2”
*Adjustable to +
_ 1/2” from standard
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
#SS-00097, v.03
Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper ƛ
TMU1NNC Series
Non-Hold Open Urinal Flushometer Valve - 1.0 gpf
FEATURES
• Manual operated, non-hold open, urinal
flushometer valve complete with 3/4” angle stop
and 3/4” or 1-1/4"vacuum breaker set
• Piston valve action with 1.0 gpf
• Left/right rough-in
MODELS
• TMU1NNC
Valve only, Right/Left Hand Rough
• TMU1NNC-12 (3/4" Vacuum breaker)
Right/Left Hand Rough
• Complete set supplied with:
Vacuum breaker & angle stop set – VB9CP-12
• 3/4” Angle stop – 10077t4
• 3/4” Vacuum breaker – 10075t2
• Spud nut & escutcheon – 71051Nt5
• Sweat solder kit – TH559EDVSJ1
• TMU1NNC-22 (1-1/4" Vacuum breaker)
Right/Left Hand Rough
• Complete set supplied with:
Vacuum breaker & angle stop set – VB9CP-22
• 3/4” Angle stop – 10077t4
• 1-1/4” Vacuum breaker – 10075t5
• Spud nut & escutcheon – 71051Nt7
• Sweat solder kit – TH559EDVSJ1
• Optional Part:
Z-4000-J - Adapter for ground joint angle stops
COLORS/FINISHES
• #CP Polished Chrome
CODES/STANDARDS
•
•
•
•
Meets or exceeds ASSE 1037, CSA B125.3
Certifications: IAPMO(cUPC), ASSE, State of
Massachusetts, City of Los Angeles, and others
Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others
ADA compliant
PRODUCT SPECIFICATION
TOTO® Model No. _____________________________
Manual type urinal flushometer valve, non-holdopen piston type with, self-cleaning debris screen
and precise flushing capability. Low consumption 1.0
lpf/3.8 lpf model. Accessories to include angle stop
with check valve, vacuum breaker. Sweat solder kit,
spud nut and escutcheon.
TMU1NNC Series
Non-Hold Open Urinal Flushometer Valve - 1.0 gpf
SPECIFICATIONS
•
•
Warranty
Material
Three Year Warranty
Bronze casting with
polished chrome finish
• Water Supply
3/4" NPT
• Fixture type
Low consumption urinal
1.0 gpf / 3.8 lpf flushometer type
• Supply water pressure 15 psi - 100 psi*
These specifications are subject to change without notice.
*Water pressures over 80 psi are not recommended for most plumbing fixtures.
Check your local plumbing code for details.
MINIMUM
2-1/4”
3/4” Inlet supply
4-3/4”*
1-1/2” NPSM
11-1/2”
*Adjustable to
1/2” from standard
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
#SS-00324, v.03
Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper ƛ
TEU1LN Series
High-Efficiency Urinal EcoPower® Flushometer Valve, 0.5 gpf
FEATURES
• Hydropower self-generating system
• Electronic flushometer valve, neutral rough-in,
complete with 3/4” angle stop and 1-1/4” or 3/4"
vacuum breaker set
• 0.5 gpf or less
• Manual override button
• 12 hour automatic flush for trap seal protection
MODELS
• TEU1LN#CP
Valve only, Left and right rough,
Polished Chrome finish
• TEU1LN12#CP (3/4" Vacuum breaker)
Left and right rough, Polished Chrome finish
• Complete set supplied with:
Vacuum breaker & angle stop set - VB9CP-12
• 3/4" Angle stop - 10077t4
• 3/4" Vacuum breaker - 10075t2
• Spud nut & escutcheon - 71051Nt5
• Sweat solder kit - TH559EDVSJ1
• TEU1LN22#CP (1-1/4" Vacuum breaker)
Left and right rough, Polished Chrome finish
• Complete set supplied with:
Vacuum breaker & angle stop set - VB9CP-22
• 3/4" Angle stop - 10077t4
• 1-1/4" Vacuum breaker - 10075t5
• Spud nut & escutcheon - 71051Nt5
• Sweat solder kit - TH559EDVSJ1
• Optional Part:
Z-4000-J - Adapter for ground joint angle stops
COLORS/FINISHES
• #CP Polished Chrome
CODES/STANDARDS
•
•
•
•
Meets or exceeds ASSE 1037, CSA B125.3
Certifications: IAPMO(cUPC), ASSE, State of
Massachusetts, City of Los Angeles, and others
Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others
ADA compliant
Piston Valve
PRODUCT SPECIFICATION
TOTO® Model No. _____________________________
Automatic infrared sensor activated, urinal flush valve.
Heavy-duty zinc die cast cover with polished chrome
finish. Vandal resistant hex head screws. Low water
consumption of 0.5 gallon per flush. Automatic sensor
adjustment on installation. Manual override button
incorporated. Piston valve and solenoid with selfcleaning mechanism. Automatic flush every twelve
hours if not used. Angle stop and vacuum breaker
included with accessories. Through the use of TOTO’s
EcoPower® Flush Valves, using the valve 30 flushes per
day will fully recharge the valve for up to 10 years.
TEU1LN Series
High-Efficiency Urinal EcoPower® Flushometer Valve, 0.5 gpf
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
Warranty
Material
Three Year Warranty
Bronze casting with
polished chrome finish
Power Supply
Hydropower self-generating
system
Water Supply
3/4" NPT
Detection time
Factory setting at six (6)
seconds minimum
Detection range
Self-adjusting to environment
Discharge quantity
Preset to 0.5 gpf / 2.4 lpf
Operating temperature 32°-104°F (0°-40°C)
Supply water pressure 15 psi - 125 psi*
Trap seal protection
Automatically flushes once
after twelve (12) hours of
non-use
These specifications are subject to change without notice.
*Water pressures over 80 psi are not recommended for most plumbing fixtures.
Check your local plumbing code for details.
4-3/4 1/2"
(120 13mm)
1-1/2"
NPSM
Min.2-1/4"(57mm)
3/4"
inlet supply
3/4"NPT
11-1/2"
(292mm)
Max 19-11/16"
(Max 500mm)
15
L
Max 31-1/2"
(Max 800mm)
*Check local codes
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
#SS-00056, v.04
Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper ƛ
TEU1GNC Series
EcoPower® Urinal Flushometer Valve, 1.0 gpf
FEATURES
• Hydropower self-generating system
• Electronic flushometer valve, neutral rough-in,
complete with 3/4” angle stop and 1-1/4” or 3/4"
vacuum breaker set
• 1.0 gpf or less
• Manual override button
• 24 hour automatic flush for trap seal protection
MODELS
• TEU1GNC
Valve only, Left and right rough,
Polished Chrome finish
• TEU1GNC-12 (3/4" Vacuum breaker)
Left and right rough, Polished Chrome finish
• Complete set supplied with:
Vacuum breaker & angle stop set - VB9CP-12
• 3/4" Angle stop - 10077t4
• 3/4" Vacuum breaker - 10075t2
• Spud nut & escutcheon - 71051Nt5
• Sweat solder kit - TH559EDVSJ1
• TEU1GNC-22 (1-1/4" Vacuum breaker)
Left and right rough, Polished Chrome finish
• Complete set supplied with:
Vacuum breaker & angle stop set - VB9CP-22
• 3/4" Angle stop - 10077t4
• 1-1/4" Vacuum breaker - 10075t5
• Spud nut & escutcheon - 71051Nt5
• Sweat solder kit - TH559EDVSJ1
• Optional Part:
Z-4000-J - Adapter for ground joint angle stops
COLORS/FINISHES
• #CP Polished Chrome
CODES/STANDARDS
•
•
•
•
Meets or exceeds ASSE 1037, CSA B125.3
Certifications: IAPMO(cUPC), ASSE, State of
Massachusetts, City of Los Angeles, and others
Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others
ADA compliant
Piston Valve
PRODUCT SPECIFICATION
TOTO® Model No. _____________________________
Automatic infrared sensor activated, urinal flush valve.
Heavy-duty zinc die cast cover with polished chrome
finish. Vandal resistant hex head screws. Low water
consumption of 1.0 gallon per flush. Automatic sensor
adjustment on installation. Manual override button
incorporated. Piston valve and solenoid with selfcleaning mechanism. Automatic flush every twenty
four hours if not used. Angle stop and vacuum breaker
included with accessories. Through the use of TOTO’s
EcoPower® Flush Valves, using the valve 12 flushes per
day will fully recharge the valve for up to 10 years.
TEU1GNC Series
EcoPower® Urinal Flushometer Valve, 1.0 gpf
SPECIFICATIONS
NOTES
•
•
TOTO’s 1.0 gpf EcoPower flush valves use “Fuzzy
Logic” technology to offer further water conservation. The flush valve’s microprocessor measures the
duration and frequency of use, then calculates the
appropriate average volume per flush. In facilities with
frequent use, the flush valve issues less water per flush
with a full flush occurring every 5 uses. In facilities with
infrequent use, the valve delivers the full flush every
time.
•
•
•
•
•
•
•
•
Warranty
Material
Three Year Warranty
Bronze casting with
polished chrome finish
Power Supply
Hydropower self-generating
system
Water Supply
3/4" NPT
Detection time
Factory setting at six (6)
seconds minimum
Detection range
Self-adjusting to environment
Discharge quantity
Preset to 1.0 gpf / 3.8 lpf
Operating temperature 32°-104°F (0°-40°C)
Supply water pressure 15 psi - 125 psi*
Trap seal protection
Automatically flushes once
after twenty-four (24) hours
of non-use
These specifications are subject to change without notice.
*Water pressures over 80 psi are not recommended for most plumbing fixtures.
Check your local plumbing code for details.
4-3/4 1/2"
(120 13mm)
1-1/2"
NPSM
Min.2-1/4"(57mm)
3/4"
inlet supply
3/4"NPT
11-1/2"
(292mm)
Max 19-11/16"
(Max 500mm)
15
L
Max 31-1/2"
(Max 800mm)
*Check local codes
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
# SS-00057, v.01
Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper ƛ
TEU3LN Series
High-Efficiency Urinal EcoPower® Flushometer Valve, 0.5 gpf
FEATURES
• Hydropower self-generating system
• Electronic flushometer valve complete with 3/4"
angle stop and 1-1/4" or 3/4" vacuum breaker set
• 0.5 gpf or less
• Back spud - concealed 4" x 4" Cover plate
• 12 hour automatic flush for trap seal protection
MODELS
• TEU3LN#SS
Valve only, Surface mount, Satin finish
• TEU3LN11#SS (3/4" Vacuum breaker)
Back spud, Satin finish
• Complete set supplied with:
Vacuum breaker & angle stop set - VB13RB-11
• 3/4" Angle stop - 10077t6
• 3/4" Vacuum breaker - 10075t6
• Outlet tube - TH559EDV171
• Sweat solder kit - SJ1
• TEU3LN21#SS (1-1/4" Vacuum breaker)
Back spud, Satin finish
• Complete set supplied with:
Vacuum breaker & angle stop set - VB13RB-21
• 3/4" Angle stop - 10077t6
• 1-1/4" Vacuum breaker - 10075t7
• Outlet tube - TH559EDV172
• Sweat solder kit - SJ1
• Optional Part:
Z-4000-J - Adapter for ground joint angle stops
COLORS/FINISHES
• #SS Stainless Steel Satin finish
CODES/STANDARDS
• Meets or exceeds ASSE 1037, CSA B125.3
• Certifications: IAPMO(cUPC), ASSE, State of
Massachusetts, City of Los Angeles, and others
• Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others
• ADA compliant
Piston Valve
PRODUCT SPECIFICATION
TOTO® Model No. _____________________________
Automatic Infrared sensor activated, toilet valve.
Heavy-duty 4” x 4” stainless steel coverplate with
satin finish. Low water consumption of 0.5 gallons per
flush. Piston valve with stainless steel self-cleaning
debris screen and self-cleaning solenoid. Automatic
flush every twelve hours if not used. Electrical sensor
separated from valve and sealed in a waterproof
compartment. manual overide button incorporated.
Through the use of TOTO’s EcoPower® Flush Valves,
using the valve 30 flushes per day will fully recharge
the valve for up to 10 years.
TEU3LN Series
High-Efficiency Urinal EcoPower® Flushometer Valve, 0.5 gpf
SPECIFICATIONS
INSTALLATION NOTES
•
•
The recommended installation for the urinal
flushometer valve is to have a 7" (178mm) minimum
space in wall. Also a minimum 12” x 12” access
panel or walk-in chase is required for service and
maintainence.
•
•
•
•
•
•
•
•
Warranty
Material
Three Year Warranty
Bronze casting with
stainless steel satin finish
Power Supply
Hydropower self-generating
system
Water Supply
3/4" NPT
Detection time
Factory setting at six (6)
seconds minimum
Detection range
Self-adjusting to environment
Discharge quantity
Preset to 0.5 gpf / 2.4 lpf
Operating temperature 32°-104°F (0°-40°C)
Supply water pressure 15 psi - 125 psi*
Trap seal protection
Automatically flushes once
after twelve (12) hours
of non-use
Wall thickness: Min. 5/8" (16mm) - Max. 1-5/8" (41mm).
Contact TOTO for different thickness.
These specifications are subject to change without notice.
*Water pressures over 80 psi are not recommended for most plumbing fixtures.
Check your local plumbing code for details.
DIAGRAM
RECOMMENDED INSTALLATION
1-3/4”
3-3/8”
Dimensions: Inch
4-3/4”* 4-3/4”* Location of the
Location of the Left water
Right water supply
supply pipe 3/4” NPT
pipe 3/4” NPT
4-3/4”
of Supply
and sensor
3-15/16”
TOTO
Back Spud 1-1/4”
Finished wall
2-3/8”
Supply
Back Spud 3/4”
Finished wall
2-3/8”
Supply
EcoPower®
OVERRIDE BUTTON
LOCATION
SENSOR
LOCATION
4-3/4”
3-15/16”
Top of the Urinal
13-1/2"
13-1/2”
Frame
13-1/2”
(distance from Spud Hole to both
of Supply and Sensor)
Opening in Wall:
3-15/16” x 3-15/16”
Urinal
Back spud (ø1-5/16”)
*+/- 1/2”
3-3/4”
Urinal
Solder joint
3-3/4”
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
#SS-00096, v.03
Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper ƛ
TEU3GN Series
EcoPower® Urinal Flushometer Valve, 1.0 gpf
FEATURES
• Hydropower self-generating system
• Electronic flushometer valve complete with 3/4"
angle stop and 1-1/4" or 3/4" vacuum breaker set
• 1.0 gpf or less
• Back spud - concealed 4" x 4" Cover plate
• 24 hour automatic flush for trap seal protection
MODELS
• TEU3GN#SS
Vavle only, Surface mount, Satin finish
• TEU3GN11#SS (3/4" Vacuum breaker)
Back spud, Satin finish
• Complete set supplied with:
Vacuum breaker & angle stop set - VB13RB-11
• 3/4" Angle stop - 10077t6
• 3/4" Vacuum breaker - 10075t6
• Outlet tube - TH559EDV171
• Sweat solder kit - SJ1
• TEU3GN21#SS (1-1/4" Vacuum breaker)
Back spud, Satin finish
• Complete set supplied with:
Vacuum breaker & angle stop set - VB13RB-21
• 3/4" Angle stop - 10077t6
• 1-1/4" Vacuum breaker - 10075t7
• Outlet tube - TH559EDV172
• Sweat solder kit - SJ1
• Optional Part:
Z-4000-J - Adapter for ground joint angle stops
COLORS/FINISHES
• #SS Stainless Steel Satin finish
CODES/STANDARDS
•
•
•
•
Meets or exceeds ASSE 1037, CSA B125.3
Certifications: IAPMO(cUPC), ASSE, State of
Massachusetts, City of Los Angeles, and others
Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others
ADA compliant
Piston Valve
PRODUCT SPECIFICATION
TOTO® Model No. _____________________________
Automatic Infrared sensor activated, toilet valve.
Heavy-duty 4” x 4” stainless steel coverplate with satin
finish. Low water consumption of 1.0 gallons per flush.
Piston valve with stainless steel self-cleaning debris
screen and self-cleaning solenoid. Automatic flush
every twenty four hours if not used. Electrical sensor
separated from valve and sealed in a waterproof
compartment. Manual overide button incorporated.
Through the use of TOTO’s EcoPower® Flush Valves,
using the valve 12 flushes per day will fully recharge
the valve for up to 10 years.
TEU3GN Series
EcoPower® Urinal Flushometer Valve, 1.0 gpf
SPECIFICATIONS
INSTALLATION NOTES
•
•
The recommended installation for the urinal
flushometer valve is to have a 7" (178mm) minimum
space in wall. Also a minimum 12” x 12” access
panel or walk-in chase is required for service and
maintainence.
•
•
•
•
•
•
•
•
Warranty
Material
Three Year Warranty
Bronze casting with
stainless steel finish
Power Supply
Hydropower self-generating
system
Water Supply
3/4" NPT
Detection time
Factory setting at six (6)
seconds minimum
Detection range
Self-adjusting to environment
Discharge quantity
Preset to 1.0 gpf / 3.8 lpf
Operating temperature 32°-104°F (0°-40°C)
Supply water pressure 15 psi - 125 psi*
Trap seal protection
Automatically flushes once
after twenty-four (24) hours
of non-use
Wall thickness: Min. 5/8" (16mm) - Max. 1-5/8" (41mm).
Contact TOTO for different thickness.
NOTES
These specifications are subject to change without notice.
*Water pressures over 80 psi are not recommended for most plumbing fixtures.
Check your local plumbing code for details.
TOTO’s 1.0 gpf EcoPower flush valves use “Fuzzy
Logic” technology to offer further water conservation. The flush valve’s microprocessor measures the
duration and frequency of use, then calculates the
appropriate average volume per flush. In facilities with
frequent use, the flush valve issues less water per flush
with a full flush occurring every 5 uses. In facilities with
infrequent use, the valve delivers the full flush every
time.
DIAGRAM
RECOMMENDED INSTALLATION
1-3/4”
3-3/8”
Dimensions: Inch
4-3/4”* 4-3/4”* Location of the
Location of the Left water
Right water supply
supply pipe 3/4” NPT
pipe 3/4” NPT
4-3/4”
of Supply
and sensor
3-15/16”
TOTO
Back Spud 1-1/4”
Finished wall
2-3/8”
Supply
Back Spud 3/4”
Finished wall
2-3/8”
Supply
EcoPower®
OVERRIDE BUTTON
LOCATION
SENSOR
LOCATION
4-3/4”
3-15/16”
Top of the Urinal
13-1/2"
13-1/2”
Frame
13-1/2”
(distance from Spud Hole to both
of Supply and Sensor)
Opening in Wall:
3-15/16” x 3-15/16”
Urinal
Back spud (ø1-5/16”)
*+/- 1/2”
3-3/4”
Urinal
Solder joint
3-3/4”
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
#SS-00095, v.03
Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper ƛ
TEU2LN Series
High-Efficiency Urinal EcoPower® Flushometer Valve, 0.5 gpf
FEATURES
• Hydropower self-generating system
• Electronic flushometer valve complete with 3/4"
angle stop and 1-1/4" or 3/4" vacuum breaker set
• 0.5 gpf or less
• Back spud - concealed 14"x 12" Cover plate
• 12 hour automatic flush for trap seal protection
MODELS
• TEU2LN#SS
Vavle only, Surface mount, Satin finish
• TEU2LN11#SS (3/4" Vacuum breaker)
Back spud, Satin finish
• Complete set supplied with:
Vacuum breaker & angle stop set - VB13RB-11
• 3/4" Angle stop - 10077t6
• 3/4" Vacuum breaker - 10075t6
• Outlet tube - TH559EDV171
• Sweat solder kit - SJ1
• TEU2LN21#SS (1-1/4" Vacuum breaker)
Back spud, Satin finish
• Complete set supplied with:
Vacuum breaker & angle stop set - VB13RB-21
• 3/4" Angle stop - 10077t6
• 1-1/4" Vacuum breaker - 10075t7
• Outlet tube - TH559EDV172
• Sweat solder kit - SJ1
• Optional Part:
Z-4000-J - Adapter for ground joint angle stops
COLORS/FINISHES
• #SS Stainless Steel Satin finish
CODES/STANDARDS
• Meets or exceeds ASSE 1037, CSA B125.3
• Certifications: IAPMO(cUPC), ASSE, State of
Massachusetts, City of Los Angeles, and others
• Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others
• ADA compliant
Piston Valve
PRODUCT SPECIFICATION
TOTO® Model No. _____________________________
Automatic infrared sensor activated, urinal flush valve.
Heavy-duty 14"x12" stainless steel coverplate with
satin finish. Vandal resistant hex head screws. Lower
water consumption of 0.5 gallon per flush. Automatic
sensor adjustment on installation. Manual override
button incorporated. Piston valve with stainless steel
self cleaning debris screen and solenoid with self
cleaning mechanism. Automatic flush every twelve
hours if not used. Angle stop and vacuum breaker
included with accessories. Electrical sensor separated
from valve and sealed in waterproof compartment.
Through the use of TOTO's EcoPower® Flush Valves,
using the valve 30 flushes per day will fully recharge
the valve for up to 10 years.
TEU2LN Series
High-Efficiency Urinal EcoPower® Flushometer Valve, 0.5 gpf
SPECIFICATIONS
•
•
INSTALLATION NOTES
Warranty
Material
Three Year Warranty
The recommended installation for the urinal
Bronze casting with
flushometer valve is to have a 7" (178mm) minimum
stainless steel finish
space in wall.
Power Supply
Hydropower self-generating
system
Water Supply
3/4" NPT
Detection time
Factory setting at six (6)
seconds minimum
Detection range
Self-adjusting to environment
Discharge quantity
Preset to 0.5 gpf / 2.4 lpf
Urinal type
Low consumption wash down
and jetted flush design urinals
Operating temperature 32°-104°F (0°-40°C)
Supply water pressure 15 psi - 125 psi*
Trap seal protection
Automatically flushes once
after twelve (12) hours of
non-use
•
•
•
•
•
•
•
•
•
These specifications are subject to change without notice.
*Water pressures over 80 psi are not recommended for most plumbing fixtures.
Check your local plumbing code for details.
DIAGRAM
RECOMMENDED INSTALLATION
Back Spud 1-1/4”
OVERRIDE
5-1/8” BUTTON
LOCATION
3-13/16”
SENSOR
LOCATION
13-1/2”
Back Spud 3/4”
Finished wall
Finished wall
Opening in wall
Opening in wall
11-15/16”
Dimensions: Inch
2-3/8”
2-3/8”
Supply
4-3/4”*
Supply
of Supply
and sensor
13-1/2”
13-1/2”
13-1/2”
(distance from Spud Hole to both
of Supply and Sensor)
Top of the Urinal
Urinal
*+/- 1/2”
Back spud (ø1-5/16”)
Urinal
3-3/4”
Solder joint
3-3/4”
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
#SS-00094, v.03
Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper ƛ
TEU2GN Series
EcoPower® Urinal Flushometer Valve, 1.0 gpf
FEATURES
• Hydropower self-generating system
• Electronic flushometer valve complete with 3/4"
angle stop and 1-1/4" or 3/4" vacuum breaker set
• 1.0 gpf or less
• Back spud - concealed 14"x 12" Cover plate
• 24 hour automatic flush for trap seal protection
MODELS
• TEU2GN#SS
Valve only, Surface mount, Satin finish
• TEU2GN11#SS (3/4" Vacuum breaker)
Back spud, Satin finish
• Complete set supplied with:
Vacuum breaker & angle stop set - VB13RB-11
• 3/4" Angle stop - 10077t6
• 3/4" Vacuum breaker - 10075t6
• Outlet tube - TH559EDV171
• Sweat solder kit - SJ1
• TEU2GN21#SS (1-1/4" Vacuum Breaker)
Back spud, Satin finish
• Complete set supplied with:
Vacuum breaker & angle stop set - VB13RB-21
• 3/4" Angle stop - 10077t6
• 1-1/4" Vacuum breaker - 10075t7
• Outlet tube - TH559EDV172
• Sweat solder kit - SJ1
• Optional Part:
Z-4000-J - Adapter for ground joint angle stops
COLORS/FINISHES
• #SS Stainless Steel Satin finish
CODES/STANDARDS
• Meets or exceeds ASSE 1037, CSA B125.3
• Certifications: IAPMO(cUPC), ASSE, State of
Massachusetts, City of Los Angeles, and others
• Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others
• ADA compliant
Piston Valve
PRODUCT SPECIFICATION
TOTO® Model No. _____________________________
Automatic infrared sensor activated, urinal flush valve.
Heavy-duty 14"x12" stainless steel coverplate with
satin finish. Vandal resistant hex head screws. Low
water consumption of 1.0 gallons per flush. Automatic
sensor adjustment on installation. Manual override
button incorporated. Piston valve with stainless steel
self-cleaning debris screen and solenoid with self
cleaning mechanism. Automatic flush every twenty
four hours if not used. Angle stop and vacuum breaker
included with accessories. Electrical sensor separated
from valve and sealed in waterproof compartment.
Through the use of TOTO's EcoPower® Flush Valves,
using the valve 12 flushes per day will fully recharge
the valve for up to 10 years.
TEU2GN Series
EcoPower® Urinal Flushometer Valve, 1.0 gpf
SPECIFICATIONS
INSTALLATION NOTES
•
•
The recommended installation for the urinal
flushometer valve is to have a 7" (178mm) minimum
space in wall.
Warranty
Material
Three Year Warranty
Bronze casting with
stainless steel satin finish
Power Supply
Hydropower self-generating
system
Water Supply
3/4" NPT
Detection time
Factory setting at six (6)
seconds minimum
Detection range
Self-adjusting to environment
Discharge quantity
Preset to 1.0 gpf / 3.8 lpf
Urinal type
Low consumption wash down
and jetted flush design urinals
Operating temperature 32°-104°F (0°-40°C)
Supply water pressure 15 psi - 125 psi*
Trap seal protection
Automatically flushes once
after twenty-four (24) hours of
non-use
•
•
•
•
•
•
•
•
•
NOTES
TOTO’s 1.0 gpf EcoPower flush valves use “Fuzzy
Logic” technology to offer further water conservation. The flush valve’s microprocessor measures the
duration and frequency of use, then calculates the
appropriate average volume per flush. In facilities with
frequent use, the flush valve issues less water per flush
with a full flush occurring every 5 uses. In facilities with
infrequent use, the valve delivers the full flush every
time.
These specifications are subject to change without notice.
*Water pressures over 80 psi are not recommended for most plumbing fixtures.
Check your local plumbing code for details.
DIAGRAM
RECOMMENDED INSTALLATION
Back Spud 1-1/4”
OVERRIDE
5-1/8” BUTTON
LOCATION
3-13/16”
SENSOR
LOCATION
13-1/2”
Back Spud 3/4”
Finished wall
Finished wall
Opening in wall
Opening in wall
11-15/16”
Dimensions: Inch
2-3/8”
2-3/8”
Supply
4-3/4”*
Supply
of Supply
and sensor
13-1/2”
13-1/2”
13-1/2”
(distance from Spud Hole to both
of Supply and Sensor)
Top of the Urinal
Urinal
*+/- 1/2”
Back spud (ø1-5/16”)
Urinal
3-3/4”
Solder joint
3-3/4”
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
#SS-00093, v.03
Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper ƛ
TMT1LN Series
Non-Hold Open High-Efficiency Toilet Flushometer Valve - 1.28 gpf
FEATURES
• Manual operated, non-hold open, toilet
flushometer valve complete with 1” angle stop and
1-1/2” vacuum breaker set
• Piston valve action with 1.28 gpf
• Left/right rough-in
MODELS
• TMT1LN#CP
Valve only, Right/Left hand rough
• TMT1LN32#CP (1-1/2" Vacuum breaker)
Right/Left hand rough
Complete set supplied with:
Vacuum breaker & angle stop set - VB9CP-32
• 1" Angle stop - 10077t3
• 1-1/2" Vacuum breaker - 10075t1
• Spud nut & escutcheon - 71051Nt6
• Sweat solder kit - TH559EDVSJ3
• Optional Parts:
Z-4000-J - Adapter for ground joint angle stops
10075T1L - 24" Long 1-1/2" vacuum breaker tube
COLORS/FINISHES
• #CP Polished Chrome
CODES/STANDARDS
•
•
•
•
Meets or exceeds ASSE 1037, CSA B125.3
Certifications: IAPMO(cUPC), ASSE, State of
Massachusetts, City of Los Angeles, and others
Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others
ADA compliant
PRODUCT SPECIFICATION
TOTO® Model No. _____________________________
Manual toilet flushometer valve, non-hold-open piston
type with self-cleaning debris screen and precise
flushing capability. Low water consumption of 1.28
gpf / 4.8 lpf Polished Chrome exterior, angle stop with
back-check and vacuum breaker included.
TMT1LN Series
Non-Hold Open High-Efficiency Toilet Flushometer Valve - 1.28 gpf
SPECIFICATIONS
•
•
•
•
•
Warranty
Material
Three Year Warranty
Bronze casting with
polished chrome finish
Water Supply
1" NPT
Fixture type
Flushometer valve bowl
1.28 gpf / 4.8 lpf
Supply water pressure 35 psi (flowing) - 100 psi*
(minimum flow rate of 23 gpm)
These specifications are subject to change without notice.
*Water pressures over 80 psi are not recommended for most plumbing fixtures.
Check your local plumbing code for details.
MINIMUM
2-1/4”
1” Inlet supply
1-1/2” NPSM
11-1/2”
4-3/4”*
TMT1LN32#CP
1 in. NPT inlet and 1-1/2 in. outlet
*Adjustable to + 1/2” from standard
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
#SS-00098, v.03
Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper ƛ
TMT1NNC Series
Non-Hold Open Toilet Flushometer Valve - 1.6 gpf
FEATURES
• Manual operated, non-hold open, toilet
flushometer valve complete with 1” angle stop and
1-1/2” vacuum breaker set
• Piston valve action with 1.6 gpf
• Left/right rough-in
MODELS
• TMT1NNC
Valve only, Right/Left hand rough
• TMT1NNC-32 (1-1/2" Vacuum breaker)
Right/Left hand rough
• Complete set supplied with:
Vacuum breaker & angle stop set - VB9CP-32
• 1" Angle stop - 10077t3
• 1-1/2" Vacuum breaker - 10075t1
• Spud nut & escutcheon - 71051Nt6
• Sweat solder kit - TH559EDVSJ3
• Optional Parts:
Z-4000-J - Adapter for ground joint angle stops
10075T1L - 24" Long 1-1/2" vacuum breaker tube
COLORS/FINISHES
• #CP Polished Chrome
CODES/STANDARDS
•
•
•
•
Meets or exceeds ASSE 1037, CSA B125.3
Certifications: IAPMO(cUPC), ASSE, State of
Massachusetts, City of Los Angeles, and others
Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others
ADA compliant
PRODUCT SPECIFICATION
TOTO® Model No. _____________________________
Manual toilet flushometer valve, non-hold-open piston
type with self-cleaning debris screen and precise
flushing capability. Low consumption 1.6 gpf models
available. Polished Chrome exterior, angle stop with
back-check and vacuum breaker included.
TMT1NNC Series
Non-Hold Open Toilet Flushometer Valve - 1.6 gpf
SPECIFICATIONS
•
•
•
•
•
Warranty
Material
Three Year Warranty
Bronze casting with
polished chrome finish
Water Supply
1" NPT
Fixture type
Flushometer valve bowl
1.6 gpf / 6.0 lpf
Supply water pressure 15 psi - 100 psi*
These specifications are subject to change without notice.
*Water pressures over 80 psi are not recommended for most plumbing fixtures.
Check your local plumbing code for details.
MINIMUM
2-1/4”
1” Inlet supply
1-1/2” NPSM
4-3/4”*
11-1/2”
*Adjustable to
1/2” from standard
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
#SS-00036, v.03
Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper ƛ
TET1LN Series
High-Efficiency Toilet EcoPower®
Flushometer Valve, 1.28 gpf
FEATURES
• Hydropower self-generating system
• Electronic flushometer valve, neutral rough-in,
complete with 1” angle stop and 1-1/2” vacuum
breaker set
• 1.28 gpf or less
• Manual override button
• 24 hour automatic flush for trap seal protection
MODELS
• TET1LN#CP
Valve only, Left and right rough,
Polished Chrome finish
• TET1LN32#CP (1-1/2" Vacuum breaker)
Left and right rough, Polished Chrome finish
Complete set supplied with:
Vacuum breaker & angle stop set - VB9CP-32
• 1" Angle stop - 10077t3
• 1-1/2" Vacuum breaker - 10075t1
• Spud nut & escutcheon - 71051Nt6
• Sweat solder kit - TH559EDVSJ3
• Optional Part:
Z-4000-J - Adapter for ground joint angle stops
COLORS/FINISHES
• #CP Polished Chrome
CODES/STANDARDS
•
•
Meets or exceeds ASSE 1037, CSA B125.3
Certifications: IAPMO(cUPC), ASSE, State of
Massachusetts, City of Los Angeles, and others
• Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others
• ADA compliant
Piston Valve
PRODUCT SPECIFICATION
TOTO® Model No. _____________________________
Automatic infrared sensor activated, toilet flush valve.
Heavy-duty zinc die cast cover with polished chrome
finish. Vandal resistant hex head screws. Low water
consumption of 1.28 gallons per flush. Automatic
sensor adjustment on installation. Manual override
button incorporated. Piston valve and solenoid with
self-cleaning mechanism. Automatic flush every twenty
four hours if not used. Angle stop and vacuum breaker
included with accessories. Through the use of TOTO’s
EcoPower® Flush Valves, using the valve 12 flushes per
day will fully recharge the valve for up to 10 years.
TET1LN Series
High-Efficiency Toilet EcoPower® Flushometer Valve, 1.28 gpf
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
INSTALLATION NOTES
Warranty
Material
Three Year Warranty
*Alternate ADA Installation
Bronze casting with
Mount grab bar at the 36” (914mm) maximum allowed
polished chrome finish
height or use the split grab bars.
Power Supply
Hydropower self-generating
system
Water Supply
1" NPT
Detection time
Factory setting at six (6)
seconds minimum
Detection range
Self-adjusting to environment
Discharge quantity
Preset to 1.28 gpf / 4.8 lpf
Operating temperature 32°-104°F (0°-40°C)
Supply water pressure 35 psi (flowing) - 125 psi*
(minimum flow rate of 23 gpm)
Trap seal protection
Automatically flushes once
after twenty-four (24) hours
of non-use
These specifications are subject to change without notice.
*Water pressures over 80 psi are not recommended for most plumbing fixtures.
Check your local plumbing code for details.
4-3/4" 1/2"
(120 13mm)
Min.2-1/4"
(57mm)
1"NPT
11-1/2"
(292mm)
Max19-11/16"
(Max 500 mm)
15
L
Max31-1/2"
(Max 800 mm)
**Check local codes
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
#SS-00086, v.04
Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper ƛ
TET1GNC Series
EcoPower® Toilet Flushometer Valve, 1.6 gpf
FEATURES
• Hydropower self-generating system
• Electronic flushometer valve, neutral rough-in,
complete with 1” angle stop and 1-1/2” vacuum
breaker set
• 1.6 gpf or less
• Manual override button
• 24 hour automatic flush for trap seal protection
MODELS
• TET1GNC
Valve only, Left and right rough,
Polished Chrome finish
• TET1GNC-32 (1-1/2" Vacuum breaker)
Left and right rough, Polished Chrome finish
Complete set supplied with:
Vacuum breaker & angle stop set - VB9CP-32
• 1" Angle stop - 10077t3
• 1-1/2" Vacuum breaker - 10075t1
• Spud nut & escutcheon - 71051Nt6
• Sweat solder kit - TH559EDVSJ3
• Optional Part:
Z-4000-J - Adapter for ground joint angle stops
Piston Valve
COLORS/FINISHES
• #CP Polished Chrome
CODES/STANDARDS
•
•
Meets or exceeds ASSE 1037, CSA B125.3
Certifications: IAPMO(cUPC), ASSE, State of
Massachusetts, City of Los Angeles, and others
• Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others
• ADA compliant
PRODUCT SPECIFICATION
TOTO® Model No. _____________________________
Automatic infrared sensor activated, toilet flush valve.
Heavy-duty zinc die cast cover with polished chrome
finish. Vandal resistant hex head screws. Low water
consumption of 1.6 gallons per flush. Automatic sensor
adjustment on installation. Manual override button
incorporated. Piston valve and solenoid with selfcleaning mechanism. Automatic flush every twenty
four hours if not used. Angle stop and vacuum breaker
included with accessories. Through the use of TOTO’s®
EcoPower Flush Valves™, using the valve 12 flushes
per day will fully recharge the valve for up to 10 years.
TET1GNC Series
EcoPower® Toilet Flushometer Valve, 1.6 gpf
SPECIFICATIONS
•
•
Warranty
Material
•
Power Supply
•
•
Water Supply
Detection time
•
•
•
•
Detection range
Discharge quantity
Supply water pressure
Trap seal protection
INSTALLATION NOTES
Three Year Warranty
*Alternate ADA Installation
Bronze casting with
Mount grab bar at the 36” (914mm) maximum allowed
polished chrome finish
height or use the split grab bars.
Hydropower self-generating
system
1" NPT
Factory setting at six (6)
seconds minimum
Self-adjusting to environment
Preset to 1.6 gpf / 6.0 lpf
15 psi - 125 psi*
Automatically flushes once
after twenty-four (24) hours
of non-use
These specifications are subject to change without notice.
*Water pressures over 80 psi are not recommended for most plumbing fixtures.
Check your local plumbing code for details.
4-3/4" 1/2"
(120 13mm)
Min.2-1/4"
(57mm)
1"NPT
11-1/2"
(292mm)
Max19-11/16"
(Max 500 mm)
15
L
Max31-1/2"
(Max 800 mm)
**Check local codes
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
# SS-00085, v.03
Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper ƛ
TET6LN Series
High-Efficiency Toilet EcoPower®
Flushometer Valve, 1.28 gpf
FEATURES
• Hydropower self-generating system
• Electronic flushometer valve, neutral rough-in,
complete with 1” angle stop and 1-1/2” vacuum
breaker set
• For use with 24" vacuum breakers
• 1.28 gpf or less
• Manual override button
• 24 hour automatic flush for trap seal protection
MODELS
• TET6LN#CP
Valve only, Left and right rough,
Polished Chrome finish
• TET6LN32#CP (1-1/2" Vacuum Breaker)
Left and right rough, Polished Chrome finish
Complete set supplied with:
Vacuum breaker & angle stop set - VBXCP-32
• 1" Angle stop - 10077t3
• 1-1/2" Vacuum breaker 24" long - 10075t1L
• Spud nut & escutcheon - 71051Nt6
• Sweat solder kit - TH559EDVSJ3
• Optional Part:
Z-4000-J - Adapter for ground joint angle stops
Piston Valve
COLORS/FINISHES
• #CP Polished Chrome
CODES/STANDARDS
•
•
•
•
Meets or exceeds ASSE 1037, CSA B125.3
Certifications: IAPMO(cUPC), ASSE, State of
Massachusetts, City of Los Angeles, and others
Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others
ADA compliant
PRODUCT SPECIFICATION
TOTO® Model No. _____________________________
Automatic infrared sensor activated, toilet flush
valve designed for use with 24" vacuum breakers.
Heavy-duty zinc die cast cover with polished chrome
finish. Vandal resistant hex head screws. Low water
consumption of 1.28 gallons per flush. Automatic
sensor adjustment on installation. Manual override
button incorporated. Piston valve and solenoid with
self-cleaning mechanism. Automatic flush every twenty
four hours if not used. Angle stop and vacuum breaker
included with accessories. Through the use of TOTO’s
EcoPower® Flush Valves, using the valve 12 flushes per
day will fully recharge the valve for up to 10 years.
TET6LN Series
High-Efficiency Toilet EcoPower® Flushometer Valve, 1.28 gpf
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
INSTALLATION NOTES
Warranty
Material
Three Year Warranty
Alternate ADA Installation:
Bronze casting with
Use split grab bars.
polished chrome finish
Power Supply
Hydropower self-generating
system
Water Supply
1" NPT
Detection time
Factory setting at six (6)
seconds minimum
Detection range
Self-adjusting to environment
Discharge quantity
Preset to 1.28 gpf / 4.8 lpf
Operating temperature 32°-104°F (0°-40°C)
Supply water pressure 35 psi (flowing) - 125 psi*
(minimum flow rate of 23 gpm)
Trap seal protection
Automatically flushes once
after twenty-four (24) hours
of non-use
These specifications are subject to change without notice.
*Water pressures over 80 psi are not recommended for most plumbing fixtures.
Check your local plumbing code for details.
4-3/4" 1/2"
(120 13mm)
1-1/2"
NPSM
Min.2-1/4"
(57mm)
1"NPT
inlet supply
27"
(686mm)
Max21-1/4"
(Max 550 mm)
20º
L
Max33-1/2"
(Max 850 mm)
*Check local codes
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
#SS-00088, v.01
Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper ƛ
TET6GNC Series
EcoPower® Toilet Flushometer Valve, 1.6 gpf
FEATURES
• Hydropower self-generating system
• Electronic flushometer valve, neutral rough-in,
complete with 1” angle stop and 1-1/2” vacuum
breaker set
• For use with 24" vacuum breakers
• 1.6 gpf or less
• Manual override button
• 24 hour automatic flush for trap seal protection
MODELS
• TET6GNC
Valve only, Left and right rough,
Polished Chrome finish
• TET6GNC-32 (1-1/2" Vacuum breaker)
Left and right rough, Polished Chrome finish
Complete set supplied with:
Vacuum breaker & angle stop set - VBXCP-32
• 1" Angle stop - 10077t3
• 1-1/2" Vacuum breaker, 24" long - 10075T1L
• Spud nut & escutcheon - 71051Nt6
• Sweat solder kit - TH559EDVSJ3
• Optional Part:
Z-4000-J - Adapter for ground joint angle stops
Piston Valve
COLORS/FINISHES
• #CP Polished Chrome
CODES/STANDARDS
•
•
Meets or exceeds ASSE 1037, CSA B125.3
Certifications: IAPMO(cUPC), ASSE, State of
Massachusetts, City of Los Angeles, and others
• Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others
• ADA compliant
PRODUCT SPECIFICATION
TOTO® Model No. _____________________________
Automatic infrared sensor activated, toilet flush
valve designed for use with 24" vacuum breakers.
Heavy-duty zinc die cast cover with polished chrome
finish. Vandal resistant hex head screws. Low water
consumption of 1.6 gallons per flush. Automatic sensor
adjustment on installation. Manual override button
incorporated. Piston valve and solenoid with selfcleaning mechanism. Automatic flush every twenty
four hours if not used. Angle stop and vacuum breaker
included with accessories. Through the use of TOTO’s
EcoPower® Flush Valves, using the valve 12 flushes per
day will fully recharge the valve for up to 10 years.
TET6GNC Series
EcoPower® Toilet Flushometer Valve, 1.6 gpf
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
INSTALLATION NOTES
Warranty
Material
Three Year Warranty
Alternate ADA Installation:
Bronze casting with
Use split grab bars.
polished chrome finish
Power Supply
Hydropower self-generating
system
Water Supply
1" NPT
Detection time
Factory setting at six (6)
seconds minimum
Detection range
Self-adjusting to environment
Discharge quantity
Preset to 1.6 gpf / 6.0 lpf
Supply water pressure 15 psi - 125 psi*
Trap seal protection
Automatically flushes once
after twenty-four (24) hours
of non-use
These specifications are subject to change without notice.
*Water pressures over 80 psi are not recommended for most plumbing fixtures.
Check your local plumbing code for details.
4-3/4" 1/2"
(120 13mm)
1-1/2"
NPSM
Min.2-1/4"
(57mm)
1"NPT
inlet supply
27"
(686mm)
Max21-1/4"
(Max 550 mm)
20º
L
Max33-1/2"
(Max 850 mm)
*Check local codes
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
#SS-00087, v.01
Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper ƛ
TET3LN Series
High-Efficiency Toilet EcoPower® Flushometer Valve, 1.28 gpf
FEATURES
• Hydropower self-generating system
• Electronic flushometer valve complete with
1" angle stop and 1-1/2" vacuum breaker set
• 1.28 gpf or less
• Back spud floor, top spud and back spud wall
models - concealed 4" x 4" Cover plate
• 24 hour automatic flush for trap seal protection
MODELS
• TET3LN#SS
Valve only, Surface mount, Satin finish
• TET3LN31#SS (1-1/2" Vacuum breaker)
Back spud wall, Satin finish
Complete set supplied with:
Vacuum breaker & angle stop set - VB13RB-31
(Back spud wall)
• 1" Angle stop - 10077t5
• 1-1/2" Vacuum breaker - 10075t4
• Outlet tube - TH559EDV176
• Sweat solder kit - SJ3
• TET3LN32#SS (1-1/2" Vacuum breaker)
Top spud, Satin finish
Complete set supplied with:
Vacuum breaker & angle stop set - VB9RB-32
(Top spud)
• 1" Angle stop - 10077t5
• 1-1/2" Vacuum breaker - 10075t3
• Outlet tube - TH559EDV177
• Sweat solder kit - SJ3
• TET3LN33#SS (1-1/2" Vacuum breaker)
Back spud floor, Satin finish
Complete set supplied with:
Vacuum breaker & angle stop set - VB13RB-33
(Back spud floor)
• 1" Angle stop - 10077t5
• 1-1/2" Vacuum breaker - 10075t4
• Outlet tube - TH559EDV175
• Sweat solder kit - SJ3
• Optional Part:
Z-4000-J - Adapter for ground joint angle stops
COLORS/FINISHES
• #SS Stainless Steel Satin finish
CODES/STANDARDS
•
•
Meets or exceeds ASSE 1037, CSA B125.3
Certifications: IAPMO(cUPC), ASSE, State of
Massachusetts, City of Los Angeles, and others
• Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others
• ADA compliant
Piston Valve
PRODUCT SPECIFICATION
TOTO® Model No. _____________________________
Automatic Infrared sensor activated, toilet valve.
Heavy-duty 4” x 4” stainless steel coverplate with
satin finish. Low water consumption of 1.28 gallons
per flush. Piston valve with stainless steel selfcleaning debris screen and self-cleaning solenoid.
Automatic flush every twenty four hours if not used.
Electrical sensor separated from valve and sealed in
a waterproof compartment. Manual overide button
incorporated. Through the use of TOTO’s EcoPower®
Flush Valves, using the valve 12 flushes per day will
fully recharge the valve for up to 10 years.
TET3LN Series
High-Efficiency Toilet EcoPower® Flushometer Valve, 1.28 gpf
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
INSTALLATION NOTES
Warranty
Material
Three Year Warranty
The recommended installation for the toilet
Bronze casting with
flushometer valve is to have a 7" (178mm) minimum
stainless steel satin finish
space in wall. Also a minimum 12” x 12” access
Power Supply
Hydropower self-generating panel or walk-in chase is required for service and
system
maintainence.
Water Supply
1" NPT
Do not place grab bars in front of sensor for ADA
Detection time
Factory setting at six (6)
stalls. See diagram below for detailed measurements.
seconds minimum
Detection range
Self-adjusting to environment Wall thickness: Min. 5/8" (16mm) - Max. 1-5/8" (41mm).
Discharge quantity
Preset to 1.28 gpf / 4.8 lpf
Contact TOTO for different thickness.
Operating temperature 32°-104°F (0°-40°C)
Supply water pressure 35 psi (flowing) - 125 psi*
(minimum flow rate of 23 gpm)
Trap seal protection
Automatically flushes once
after twenty four (24) hours
of non-use
These specifications are subject to change without notice.
*Water pressures over 80 psi are not recommended for most plumbing fixtures.
Check your local plumbing code for details.
DIAGRAM
RECOMMENDED INSTALLATION
1-3/4”
3-3/8”
Dimensions: Inch
4-3/4”
TET3LN-33#SS
TET3LN-31#SS
Top Spud
Back Spud Floor Mount
Back Spud Wall Mount
Finished wall
3-15/16” x 3-15/16”
of
sensor
4-3/4”*
TOTO
EcoPower®
4-3/4”*
OVERRIDE BUTTON
LOCATION
SENSOR
LOCATION
TET3LN-32#SS
Opening in Wall:
2-3/8”
Supply
x
6 - 7-1/8”
Finished wall
Finished wall
2-3/8”
2-3/8”
of
of
sensor
Supply sensor
Supply
x
11”
16”
Supply
of frame
and fixture
5”
2-1/4” Min.
* +/- 1/2”
Always position the sensor above upright toilet seats and grab bars
X= At least 5” clearance from sensor to tip of toilet seat up
position or to top of grab bar is required to avoid false detection.
x
Elbow
Nut Bowl
Bowl
(3-3/4"- 4-7/8") *
(3-3/4"- 4-7/8") *
frame
16”
Bowl 3”
(3-3/4"- 4-7/8") *
Depending on X, the frame may not be centered to Supply CL as shown.
*Leave some room for elbow nut from the wall for future maintenance.
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
#SS-00092, v.03
Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper ƛ
TET3GN Series
EcoPower® Toilet Flushometer Valve, 1.6 gpf
FEATURES
• Hydropower self-generating system
• Electronic flushometer valve complete with
1" angle stop and 1-1/2" vacuum breaker set
• 1.6 gpf or less
• Back spud floor, top spud and back spud wall
models - concealed 4" x 4" Cover plate
• 24 hour automatic flush for trap seal protection
MODELS
• TET3GN#SS
Valve only, Surface mount, Satin finish
• TET3GN31#SS (1-1/2" Vacuum breaker)
Back spud wall, Satin finish
• Complete set supplied with:
Vacuum breaker & angle stop set - VB13RB-31
(Back spud wall)
• 1" Angle stop - 10077t5
• 1-1/2" Vacuum breaker - 10075t4
• Outlet tube - TH559EDV176
• Sweat solder kit - SJ3
• TET3GN32#SS (1-1/2" Vacuum breaker)
Top spud, Satin finish
• Complete set supplied with:
Vacuum breaker & angle stop set - VB9RB-32
(Top spud)
• 1" Angle stop - 10077t5
• 1-1/2" Vacuum breaker - 10075t3
• Outlet tube - TH559EDV177
• Sweat solder kit - SJ3
• TET3GN33#SS (1-1/2" Vacuum breaker)
Back spud floor, Satin finish
• Complete set supplied with:
Vacuum breaker & angle stop set - VB13RB-33
(Back spud floor)
• 1" Angle stop - 10077t5
• 1-1/2" Vacuum breaker - 10075t4
• Outlet tube - TH559EDV175
• Sweat solder kit - SJ3
• Optional Part:
Z-4000-J - Adapter for ground joint angle stops
COLORS/FINISHES
• #SS Stainless Steel Satin finish
CODES/STANDARDS
• Meets or exceeds ASSE 1037, CSA B125.3
• Certifications: IAPMO(cUPC), ASSE, State of
Massachusetts, City of Los Angeles, and others
• Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others
• ADA compliant
Piston Valve
PRODUCT SPECIFICATION
TOTO® Model No. _____________________________
Automatic Infrared sensor activated, toilet valve.
Heavy-duty 4” x 4” stainless steel coverplate with satin
finish. Low water consumption of 1.6 gallons per flush.
Piston valve with stainless steel self-cleaning debris
screen and self-cleaning solenoid. Automatic flush
every twenty four hours if not used. Electrical sensor
separated from valve and sealed in a waterproof
compartment. Manual overide button incorporated.
Through the use of TOTO’s EcoPower® Flush Valves,
using the valve 12 flushes per day will fully recharge
the valve for up to 10 years.
TET3GN Series
EcoPower® Toilet Flushometer Valve, 1.6 gpf
SPECIFICATIONS
INSTALLATION NOTES
•
•
The recommended installation for the toilet
flushometer valve is to have a 7" (178mm) minimum
space in wall. Also a minimum 12” x 12” access
panel or walk-in chase is required for service and
maintainence.
•
•
•
•
•
•
•
•
Warranty
Material
Three Year Warranty
Bronze casting with
stainless steel satin finish
Power Supply
Hydropower self-generating
system
Water Supply
1" NPT
Detection time
Factory setting at six (6)
seconds minimum
Detection range
Self-adjusting to environment
Discharge quantity
Preset to 1.6 gpf / 6.0 lpf
Operating temperature 32°-104°F (0°-40°C)
Supply water pressure 15 psi - 125 psi*
Trap seal protection
Automatically flushes once
after twenty four (24) hours
of non-use
Do not place grab bars in front of sensor for ADA
stalls. See diagram below for detailed measurements.
Wall thickness: Min. 5/8" (16mm) - Max. 1-5/8" (41mm).
Contact TOTO for different thickness.
These specifications are subject to change without notice.
*Water pressures over 80 psi are not recommended for most plumbing fixtures.
Check your local plumbing code for details.
DIAGRAM
RECOMMENDED INSTALLATION
1-3/4”
3-3/8”
Dimensions: Inch
4-3/4”
TET3GN-33#SS
TET3GN-31#SS
Top Spud
Back Spud Floor Mount
Back Spud Wall Mount
Opening in Wall:
Finished wall
3-15/16” x 3-15/16”
of
sensor
4-3/4”*
TOTO
EcoPower®
4-3/4”*
OVERRIDE BUTTON
LOCATION
SENSOR
LOCATION
TET3GN-32#SS
2-3/8”
Supply
x
6 - 7-1/8”
Finished wall
Finished wall
2-3/8”
2-3/8”
of
of
sensor
Supply sensor
Supply
x
11”
16”
Supply
of frame
and fixture
5”
2-1/4” Min.
* +/- 1/2”
Always position the sensor above upright toilet seats and grab bars
X= At least 5” clearance from sensor to tip of toilet seat up
position or to top of grab bar is required to avoid false detection.
x
Elbow
Nut Bowl
Bowl
(3-3/4"- 4-7/8") *
(3-3/4"- 4-7/8") *
frame
16”
Bowl 3”
(3-3/4"- 4-7/8") *
Depending on X, the frame may not be centered to Supply CL as shown.
*Leave some room for elbow nut from the wall for future maintenance.
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
#SS-00091, v.03
Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper ƛ
TET2LN Series
High-Efficiency Toilet EcoPower® Flushometer Valve, 1.28 gpf
FEATURES
• Hydropower self-generating system
• Electronic flushometer valve complete with 1"
angle stop and 1-1/2" vacuum breaker set
• Back spud floor, top spud and back spud wall
models - concealed 14" x 12" Cover plate
• 24 hour automatic flush for trap seal protection
MODELS
• TET2LN#SS
Valve only, Surface mount, Satin finish
• TET2LN31#SS (1-1/2" Vacuum breaker)
Back spud wall, Satin finish
• Complete set supplied with:
Vacuum breaker & angle stop set - VB13RB-31
(Back spud wall)
• 1" Angle stop - 10077t5
• 1-1/2" Vacuum breaker - 10075t4
• Outlet tube - TH559EDV176
• Sweat solder kit - SJ3
• TET2LN32#SS (1-1/2" Vacuum breaker)
Top spud, Satin finish
• Complete set supplied with:
Vacuum breaker & angle stop set - VB9RB-32
(Top spud)
• 1" Angle stop - 10077t5
• 1-1/2" Vacuum breaker - 10075t3
• Outlet tube - TH559EDV177
• Sweat solder kit - SJ3
• TET2LN33#SS (1-1/2" Vacuum breaker)
Back spud floor, Satin finish
• Complete set supplied with:
Vacuum breaker & angle stop set - VB13RB-33
(Back spud floor)
• 1" Angle stop - 10077t5
• 1-1/2" Vacuum breaker - 10075t4
• Outlet tube - TH559EDV175
• Sweat solder kit - SJ3
• Optional Part:
Z-4000-J - Adapter for ground joint angle stops
COLORS/FINISHES
• #SS Stainless Steel Satin finish
CODES/STANDARDS
• Meets or exceeds ASSE 1037, CSA B125.3
• Certifications: IAPMO(cUPC), ASSE, State of
Massachusetts, City of Los Angeles, and others
• Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others
• ADA compliant
Piston Valve
PRODUCT SPECIFICATION
TOTO® Model No. _____________________________
Automatic Infrared sensor activated, toilet valve.
Heavy-duty 14” x 12” stainless steel coverplate with
satin finish and vandal resistant mounting screws.
Low water consumption of 1.28 gallons per flush.
Piston valve with stainless steel self-cleaning debris
screen and self-cleaning solenoid. Automatic flush
every twenty four hours if not used. Electrical sensor
separated from valve and sealed in a waterproof
compartment. Manual overide button incorporated.
Through the use of TOTO’s EcoPower® Flush Valves,
using the valve 12 flushes per day will fully recharge
the valve for up to 10 years.
TET2LN Series
High-Efficiency Toilet EcoPower® Flushometer Valve, 1.28 gpf
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
INSTALLATION NOTES
Warranty
Material
Three Year Warranty
The recommended installation for the toilet flush valve
Bronze casting with
is to have a 7" (178mm) minimum space in wall. Do not
stainless steel satin finish
place grab bars in front of sensor for ADA stalls. See
Power Supply
Hydropower self-generating diagram below for detailed measurements.
system
Water Supply
1" NPT
Detection time
Factory setting at six (6)
seconds minimum
Detection range
Self-adjusting to environment
Discharge quantity
Preset to 1.28 gpf / 4.8 lpf
Operating temperature 32°-104°F (0°-40°C)
Supply water pressure 35 psi (flowing) - 125 psi*
(minimum flow rate of 23 gpm)
Trap seal protection
Automatically flushes once
after twenty four (24) hours
of non-use
These specifications are subject to change without notice.
*Water pressures over 80 psi are not recommended for most plumbing fixtures.
Check your local plumbing code for details.
DIAGRAM
RECOMMENDED INSTALLATION
Dimensions: Inch
SENSOR
LOCATION
OVERRIDE
BUTTON
LOCATION
Supply
4-3/4”*
TET2LN-31#SS
Back Spud Floor Mount
Back Spud Wall Mount
of
sensor
6 - 7-1/8”
14-3/4”
of frame
and fixture
fixture
5”
* +/- 1/2”
Always position the sensor above upright toilet seats and grab bars
X= At least 5” clearance from sensor to tip of toilet seat up
position or to top of grab bar is required to avoid false detection.
2-3/8”
Supply
x
of sensor
3-13/16”
5-1/8”
11-15/16”
TET2LN-33#SS
Top Spud
Finished wall
Opening in wall
Opening in wall
TET2LN-32#SS
13-1/2”
2-1/4” Min.
Finished wall
Finished wall
2-3/8”
2-3/8”
of
of
sensor
Supply sensor
Supply
x
x
11”
16”
Elbow
Nut Bowl
Bowl
(3-3/4"- 4-7/8") *
(3-3/4"- 4-7/8") *
frame
16”
Bowl 3”
(3-3/4"- 4-7/8") *
*Leave some room for elbow nut from the wall for future maintenance.
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
#SS-00090, v.03
Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper ƛ
TET2GN Series
EcoPower® Toilet Flushometer Valve, 1.6 gpf
FEATURES
• Hydropower self-generating system
• Electronic flushometer valve complete with 1"
angle stop and 1-1/2" vacuum breaker set
• 1.6 gpf or less
• Back spud floor, top spud and back spud wall
models - concealed 14" x 12" Cover plate
• 24 hour automatic flush for trap seal protection
MODELS
• TET2GN#SS
Valve only, Surface mount, Satin finish
• TET2GN31#SS (1-1/2" Vacuum breaker)
Back spud wall, Satin finish
• Complete set supplied with:
Vacuum breaker & angle stop set - VB13RB-31
(Back spud wall)
• 1" Angle stop - 10077t5
• 1-1/2" Vacuum breaker - 10075t4
• Outlet tube - TH559EDV176
• Sweat solder kit - SJ3
• TET2GN32#SS (1-1/2" Vacuum breaker)
Top spud, Satin finish
• Complete set supplied with:
Vacuum breaker & angle stop set - VB9RB-32
(Top spud)
• 1" Angle stop - 10077t5
• 1-1/2" Vacuum breaker - 10075t3
• Outlet tube - TH559EDV177
• Sweat solder kit - SJ3
• TET2GN33#SS (1-1/2" Vacuum breaker)
Back spud floor, Satin finish
• Complete set supplied with:
Vacuum breaker & angle stop set - VB13RB-33
(Back spud floor)
• 1" Angle stop - 10077t5
• 1-1/2" Vacuum breaker - 10075t4
• Outlet tube - TH559EDV175
• Sweat solder kit - SJ3
• Optional Part:
Z-4000-J - Adapter for ground joint angle stops
COLORS/FINISHES
• #SS Stainless Steel Satin finish
CODES/STANDARDS
•
•
Meets or exceeds ASSE 1037, CSA B125.3
Certifications: IAPMO(cUPC), ASSE, State of
Massachusetts, City of Los Angeles, and others
• Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others
• ADA compliant
Piston Valve
PRODUCT SPECIFICATION
TOTO® Model No. _____________________________
Automatic Infrared sensor activated, toilet valve.
Heavy-duty 14” x 12” cover plate with stainless steel
satin finish and vandal resistant mounting screws.
Low water consumption of 1.6 gallons per flush.
Piston valve with stainless steel self-cleaning debris
screen and self-cleaning solenoid. Automatic flush
every twenty four hours if not used. Electrical sensor
separated from valve and sealed in a waterproof
compartment. Manual overide button incorporated.
Through the use of TOTO’s EcoPower® Flush Valves,
using the valve 12 flushes per day will fully recharge
the valve for up to 10 years.
TET2GN Series
EcoPower® Toilet Flushometer Valve, 1.6 gpf
SPECIFICATIONS
INSTALLATION NOTES
•
•
The recommended installation for the toilet flush valve
is to have a 7" (178mm) minimum space in wall. Do not
place grab bars in front of sensor for ADA stalls. See
diagram below for detailed measurements.
•
•
•
•
•
•
•
•
Warranty
Material
Three Year Warranty
Bronze casting with
stainless steel satin finish
Power Supply
Hydropower self-generating
system
Water Supply
1" NPT
Detection time
Factory setting at six (6)
seconds minimum
Detection range
Self-adjusting to environment
Discharge quantity
Preset to 1.6 gpf / 6.0 lpf
Operating temperature 32°-104°F (0°-40°C)
Supply water pressure 15 psi - 125 psi*
Trap seal protection
Automatically flushes once
after twenty four (24) hours
of non-use
These specifications are subject to change without notice.
*Water pressures over 80 psi are not recommended for most plumbing fixtures.
Check your local plumbing code for details.
DIAGRAM
RECOMMENDED INSTALLATION
Dimensions: Inch
SENSOR
LOCATION
OVERRIDE
BUTTON
LOCATION
TET2GN-31#SS
Top Spud
Back Spud Floor Mount
Back Spud Wall Mount
Finished wall
Supply
4-3/4”*
of
sensor
6 - 7-1/8”
14-3/4”
of frame
and fixture
fixture
5”
* +/- 1/2”
Always position the sensor above upright toilet seats and grab bars
X= At least 5” clearance from sensor to tip of toilet seat up
position or to top of grab bar is required to avoid false detection.
2-3/8”
Supply
x
of sensor
3-13/16”
5-1/8”
11-15/16”
TET2GN-33#SS
13-1/2”
Opening in wall
Opening in wall
TET2GN-32#SS
2-1/4” Min.
Finished wall
Finished wall
2-3/8”
2-3/8”
of
of
sensor
Supply sensor
Supply
x
x
11”
16”
Elbow
Nut Bowl
Bowl
(3-3/4"- 4-7/8") *
(3-3/4"- 4-7/8") *
frame
16”
Bowl 3”
(3-3/4"- 4-7/8") *
*Leave some room for elbow nut from the wall for future maintenance.
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
#SS-00089, v.03
Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper ƛ
TEL3GS & TEL5GS Series
Standard EcoPower® Faucet
FEATURES
• Hydropower self-generating system
• Sensor faucet with aerated flow
• Self adjusting faucet with control box and
mounting hardware, less supply lines
• 1/2” water supply male threaded
• NSF compliant
• Single-hole mount
MODELS
• TEL3GS10#CP - Single Supply
Discharge: On-demand; Up to 10 seconds while activated.
• TEL5GS10#CP - Thermal Mixing
Discharge: On-demand; Up to 10 seconds while activated.
Controller/Mixer #: TN78-10V510
• TEL3GS60#CP - Single Supply
Discharge: On-demand; Up to 60 seconds while activated.
• TEL5GS60#CP - Thermal Mixing
Discharge: On-demand; Up to 60 seconds while activated.
Controller/Mixer #: TN78-10V560
• Optional Accessories:
1.0 gpm Laminar Flow Nozzle: TH559EDV908
TN71V100S - 4" cc Cover Plate
71244T8CC - 8" cc Cover Plate
COLORS/FINISHES
• #CP Polished Chrome
CODES/STANDARDS
•
•
•
•
•
•
Exceeds mandatory baseline, 0.20 gallon/cycle,
of California Green Building Code, CALGreen, by
using TOTO faucets with 10 second cycle
Meets or exceeds ASME A112.18.1/CSA B125.1,
NSF 61-9, and ASSE 1070*
Certifications: IAPMO(cUPC), ASSE, State of
Massachusetts, and others
Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others
Legislative compliance: California AB 1953 &
Vermont S.152, and City of Los Angeles Water
Efficiency Ordinance
ADA compliant
*Note: ASSE 1070 supersedes ASSE1016 for non-shower point of
use devices. Applies to TEL5 series models.
PRODUCT SPECIFICATION
TOTO Model #______________ Automatic infrared
sensor activated faucet. Anti-scald, thermal mixing
chamber (thermal faucets only). Automatic sensor
adjustment on installation. Maximum discharge 0.17
gallons per 10 second cycle. Electrical components
separated from spout assembly and sealed in
waterproof compartments. Single hole faucet with
optional 4" cc and 8" cc cover plates. All TEL5 series
use an ASSE 1070 listed controller module with mixing
valve. TOTO faucets with 10 second cycle use 0.17
gallon/cycle which is 15% below CALGreen's baseline.
TEL3GS & TEL5GS Series
Standard EcoPower® Faucet
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
•
NOTE
Warranty
Material
Power Supply
Three year warranty
Brass
Hydropower self-generating
system
Hot/Cold-water Supply Minimum required water
pressure: 20PSI
Maximum water pressure:
125PSI*
Water Supply Connect 1/2" NPSM
Water Consumption
10 Second Faucet:
0.17 gal. per cycle (max)
60 Second Faucet:
1.0 gpm (4.0 lpm)
Water Saving Function Automatically turns OFF
when user removes hands
Maximum continuous run
time is 10 or 60 seconds
Detection time
ON feature: Immediate
OFF feature: 1 second delay
Detection range
Factory set at 2-1/4"
Faucet automatically sets the
detection range according
to the size of the basin
Discharge water
Thermal Mixing Faucet:
temperature control
Cold water - 104°F (Max)
range
(When used under standard
conditions)
Anti-scald safety
Provides the user protection
feature
against exposure to
excessive water temperature
(Thermal mixing faucet, only)
4-1/2"
(114mm)
Following the Federal mandate for water efficiency
outlined in the Environmental Protection Act of 1992,
Faucets can be rated for water consumption based on
two categories: flow rate and water consumption.
With the “Water Consumption” standard, a faucet
must not use more than 0.25 gallons of water per
cycle. The TOTO® faucet with a 10 second cycle uses
0.17 gallons of water. This is a 32% below the base line
of 0.25 gallons per cycle.
Furthermore, an innovative design feature
incorporated into all TOTO electronic faucets is an
"ON-DEMAND" mode. This means that the faucet will
only delver water as needed and will not run the entire
duration of its rated cycle - either 10 or 60 seconds.
This guarantees additional water savings.
TOTO uses water consumption because it is the most
accurate method of measuring water use. This method
of measurement can be incorporated into water usage
calculations for various efficiency programs. For more
information, please consult www.totousa.com.
*Water pressures over 80 psi are not recommended for most
plumbing fixtures.
3-15/16"
(100mm)
2"
(50mm)
2-15/16"
(75mm)
4-1/2"
(114mm)
60°
10-1/4"
(260mm)
10-1/4"
(260mm)
Water supply
31"
(787mm)
6"
(152mm)
20-3/4"
(527mm)
HOT
F.L.
Single Supply
1-3/16"
(30mm)
5-1/2"
(140mm)
F.L.
2-15/16"
(75mm)
34"
(864mm)
1-1/2"
(38mm)
COLD
8" (203mm)
10-1/4"
(260mm)
3-15/16"
(100mm)
2"
(50mm)
6"
(152mm)
1"
(25mm)
3-3/4"
(95mm)
1"
(25mm)
60°
16-7/8"
(428mm)
17-1/8"
(436mm)
1-2/3"
(42mm)
6-1/2"
(165mm)
Thermal Mixing
Maximum deck thickness 2" (50mm)
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
#SS-00420, v.06
Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper ƛ
TEL3GG & TEL5GG Series
Gooseneck EcoPower® Faucet
FEATURES
• Hydropower self-generating system
• Sensor faucet with aerated flow
• Self adjusting faucet with control box and
mounting hardware, less supply lines
• 1/2” water supply male threaded
• NSF compliant
• Single-hole mount
MODELS
• TEL3GG10#CP - Single Supply
Discharge: On-demand; Up to 10 seconds while activated.
• TEL5GG10#CP - Thermal Mixing
Discharge: On-demand; Up to 10 seconds while activated.
Controller/Mixer #: TN78-10V510
• TEL3GG60#CP - Single Supply
Discharge: On-demand; Up to 60 seconds while activated.
• TEL5GG60#CP - Thermal Mixing
Discharge: On-demand; Up to 60 seconds while activated.
Controller/Mixer #: TN78-10V560
• Optional Accessories:
1.0 gpm Laminar Flow Nozzle: TH559EDV432
TN71V100S - 4" cc Cover Plate
71244T8CC - 8" cc Cover Plate
COLORS/FINISHES
• #CP Polished Chrome
CODES/STANDARDS
•
•
•
•
•
•
Exceeds mandatory baseline, 0.20 gallon/cycle,
of California Green Building Code, CALGreen, by
using TOTO faucets with 10 second cycle
Meets or exceeds ASME A112.18.1/CSA B125.1,
NSF 61-9, and ASSE 1070*
Certifications: IAPMO(cUPC), ASSE, State of
Massachusetts, and others
Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others
Legislative compliance: California AB 1953 &
Vermont S.152, and City of Los Angeles Water
Efficiency Ordinance
ADA compliant
*Note: ASSE 1070 supersedes ASSE1016 for non-shower point of
use devices. Applies to TEL5 series models.
PRODUCT SPECIFICATION
TOTO Model #______________ Automatic infrared
sensor activated gooseneck spout faucet. Anti-scald,
thermal mixing chamber (thermal faucets only).
Automatic sensor adjustment on installation.
Maximum discharge 0.17 gallons per 10 second cycle.
Electrical components separated from spout assembly
and sealed in waterproof compartments. Single hole
faucet with optional 4" cc and 8" cc cover plates. All
TEL5 series use an ASSE 1070 listed controller module
with mixing valve. TOTO faucets with 10 second cycle
use 0.17 gallon/cycle which is 15% below CALGreen's
baseline.
TEL3GG & TEL5GG Series
Gooseneck EcoPower® Faucet
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
•
NOTE
Warranty
Material
Power Supply
Three year warranty
Brass
Hydropower self-generating
system
Hot/Cold-water Supply Minimum required water
pressure: 20PSI
Maximum water pressure:
125PSI*
Water Supply Connect 1/2" NPSM
Water Consumption
10 Second Faucet:
0.17 gal. per cycle (max)
60 Second Faucet:
1.0 gpm (4.0 lpm)
Water Saving Function Automatically turns OFF
when user removes hands
Maximum continuous run
time is 10 or 60 seconds
Detection time
ON feature: Immediate
OFF feature: 1 second delay
Detection range
Factory set at 2-1/4"
Faucet automatically sets the
detection range according
to the size of the basin
Discharge water
Thermal Mixing Faucet:
temperature control
Cold water - 104°F (Max)
range
(When used under standard
conditions)
Anti-scald safety
Provides the user protection
feature
against exposure to
excessive water temperature
(Thermal mixing faucet, only)
2"
(50mm)
Following the Federal mandate for water efficiency
outlined in the Environmental Protection Act of 1992,
Faucets can be rated for water consumption based on
two categories: flow rate and water consumption.
With the “Water Consumption” standard, a faucet
must not use more than 0.25 gallons of water per
cycle. The TOTO® faucet with a 10 second cycle uses
0.17 gallons of water. This is a 32% below the base line
of 0.25 gallons per cycle.
Furthermore, an innovative design feature
incorporated into all TOTO electronic faucets is an
"ON-DEMAND" mode. This means that the faucet will
only delver water as needed and will not run the entire
duration of its rated cycle - either 10 or 60 seconds.
This guarantees additional water savings.
TOTO uses water consumption because it is the most
accurate method of measuring water use. This method
of measurement can be incorporated into water usage
calculations for various efficiency programs. For more
information, please consult www.totousa.com.
*Water pressures over 80 psi are not recommended for most
plumbing fixtures.
2"
(50mm)
5-3/4"
(146mm)
9-1/8"
(231mm)
5-7/8"
(149mm)
9-1/8"
(231mm)
10°
10-1/4"
(260mm)
10-1/4"
(260mm)
Water supply
31"
(787mm)
6"
(152mm)
20-3/4"
(527mm)
HOT
F.L.
Single Supply
1-3/16"
(30mm)
5-1/2"
(140mm)
F.L.
5-7/8"
(149mm)
34"
(864mm)
10°
16-7/8"
(428mm)
1-1/2"
(38mm)
COLD
8" (203mm)
10-1/4"
(260mm)
5-3/4"
(146mm)
6"
(152mm)
1"
(25mm)
3-3/4"
(95mm)
1"
(25mm)
17-1/8"
(436mm)
1-2/3"
(42mm)
6-1/2"
(165mm)
Thermal Mixing
Maximum deck thickness 2" (50mm)
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
#SS-00417, v.07
Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper ƛ
TEL3LS & TEL5LS Series
Standard EcoPower® Faucet
FEATURES
• Hydropower self-generating system
• Sensor faucet with aerated flow
• Self adjusting faucet with control box and
mounting hardware, less supply lines
• 1/2” water supply male threaded
• NSF compliant
• Single-hole mount
MODELS
• TEL3LS10#CP - Single Supply
Discharge: On-demand; Up to 10 seconds while activated.
• TEL5LS10#CP - Thermal Mixing
Discharge: On-demand; Up to 10 seconds while activated.
Controller/Mixer #: TN78-10V710
• Optional Accessories:
TN71V100S - 4" cc Cover Plate
71244T8CC - 8" cc Cover Plate
COLORS/FINISHES
• #CP Polished Chrome
CODES/STANDARDS
•
•
•
•
•
•
Exceeds mandatory baseline, 0.20 gallon/cycle, of
California Green Building Code, CALGreen
Meets or exceeds ASME A112.18.1/CSA B125.1,
NSF 61-9, and ASSE 1070*
Certifications: IAPMO(cUPC), ASSE, State of
Massachusetts, and others
Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others
Legislative compliance: California AB 1953 &
Vermont S.152, California Green Code, and City of
Los Angeles Water Efficiency Ordinance
ADA compliant
*Note: ASSE 1070 supersedes ASSE1016 for non-shower point of
use devices. Applies to TEL5 series models.
PRODUCT SPECIFICATION
TOTO Model #______________ Automatic infrared
sensor activated faucet. Anti-scald, thermal mixing
chamber (thermal faucets only). Automatic sensor
adjustment on installation. Maximum discharge 0.09
gallon per 10 second cycle. Electrical components
separated from spout assembly and sealed in
waterproof compartments. Single hole faucet with
optional 4" cc and 8" cc cover plates. All TEL5 series
use an ASSE 1070 listed controller module with mixing
valve. Both faucets use 0.09 gallon/cycle which is 55%
below CALGreen's baseline.
TEL3LS & TEL5LS Series
Standard EcoPower® Faucet
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
•
NOTE
Warranty
Material
Power Supply
Three year warranty
Brass
Hydropower self-generating
system
Hot/Cold-water Supply Minimum required water
pressure: 20PSI
Maximum water pressure:
125PSI*
Water Supply Connect 1/2" NPSM
Water Consumption
0.09 gallons per cycle (max);
0.5 gallons per minute
Water Saving Function Automatically turns OFF
when user removes hands
Maximum continuous run
time is 10
Detection time
ON feature: Immediate
OFF feature: 1 second delay
Detection range
Factory set at 2-1/4"
Faucet automatically sets the
detection range according
to the size of the basin
Discharge water
Thermal Mixing Faucet:
temperature control
Cold water - 104°F (Max)
range
(When used under standard
conditions)
Anti-scald safety
Provides the user protection
feature
against exposure to
excessive water temperature
(Thermal mixing faucet, only)
4-1/2"
(114mm)
Following the Federal mandate for water efficiency
outlined in the Environmental Protection Act of 1992,
Faucets can be rated for water consumption based on
two categories: flow rate and water consumption.
With the “Water Consumption” standard, a faucet
must not use more than 0.25 gallon of water per cycle.
The TOTO® faucet with a 10 second cycle uses 0.09
gallon of water, or 0.5 gallon per minute. This is a 64%
below the base line of 0.25 gallon per cycle.
Furthermore, an innovative design feature
incorporated into all TOTO electronic faucets is an
"ON-DEMAND" mode. This means that the faucet will
only delver water as needed and will not run the entire
duration of its rated cycle - either 10 or 60 seconds.
This guarantees additional water savings.
TOTO uses water consumption because it is the most
accurate method of measuring water use. This method
of measurement can be incorporated into water usage
calculations for various efficiency programs. For more
information, please consult www.totousa.com.
*Water pressures over 80 psi are not recommended for most
plumbing fixtures.
3-15/16"
(100mm)
2"
(50mm)
2-15/16"
(75mm)
4-1/2"
(114mm)
60°
10-1/4"
(260mm)
10-1/4"
(260mm)
Water supply
31"
(787mm)
6"
(152mm)
20-3/4"
(527mm)
HOT
F.L.
Single Supply
1-3/16"
(30mm)
5-1/2"
(140mm)
F.L.
2-15/16"
(75mm)
34"
(864mm)
1-1/2"
(38mm)
COLD
8" (203mm)
10-1/4"
(260mm)
3-15/16"
(100mm)
2"
(50mm)
6"
(152mm)
1"
(25mm)
3-3/4"
(95mm)
1"
(25mm)
60°
16-7/8"
(428mm)
17-1/8"
(436mm)
1-2/3"
(42mm)
6-1/2"
(165mm)
Thermal Mixing
Maximum deck thickness 2" (50mm)
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
#SS-00422, v.06
Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper ƛ
TEL3LG & TEL5LG Series
Gooseneck EcoPower® Faucet
FEATURES
• Hydropower self-generating system
• Sensor faucet with aerated flow
• Self adjusting faucet with control box and
mounting hardware, less supply lines
• 1/2” water supply male threaded
• Single-hole mount
• NSF compliant
MODELS
• TEL3LG10#CP - Single Supply
Discharge: On-demand; Up to 10 seconds while activated.
• TEL5LG10#CP - Thermal Mixing
Discharge: On-demand; Up to 10 seconds while activated.
Controller/Mixer #: TN78-10V710
• Optional Accessories:
TN71V100S - 4" cc Cover Plate
71244T8CC - 8" cc Cover Plate
COLORS/FINISHES
• #CP Polished Chrome
PRODUCT SPECIFICATION
CODES/STANDARDS
•
•
•
•
•
•
Exceeds mandatory baseline, 0.20 gallon/cycle, of
California Green Building Code, CALGreen
Meets or exceeds ASME A112.18.1/CSA B125.1,
NSF 61-9, and ASSE 1070*
Certifications: IAPMO(cUPC), ASSE, State of
Massachusetts, and others
Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others
Legislative compliance: California AB 1953 &
Vermont S.152, and City of Los Angeles Water
Efficiency Ordinance
ADA compliant
*Note: ASSE 1070 supersedes ASSE1016 for non-shower point of
use devices. Applies to TEL5 series models.
TOTO Model #______________ Automatic infrared
sensor activated faucet. Anti-scald, thermal mixing
chamber (thermal faucets only). Automatic sensor
adjustment on installation. Maximum discharge 0.09
gallons per 10 second cycle. Electrical components
separated from spout assembly and sealed in
waterproof compartments. Single hole faucet with
optional 4" cc and 8" cc cover plates. All TEL5 series
use an ASSE 1070 listed controller module with mixing
valve. Both faucets use 0.09 gallon/cycle which is 55%
below CALGreen's baseline.
TEL3LG & TEL5LG Series
Gooseneck EcoPower® Faucet
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
•
NOTE
Warranty
Material
Power Supply
Three year warranty
Brass
Hydropower self-generating
system
Hot/Cold-water Supply Minimum required water
pressure: 20PSI
Maximum water pressure:
125PSI*
Water Supply Connect 1/2" NPSM
Water Consumption
0.09 gallons per cycle (max) /
0.5 gallons per minute
Water Saving Function Automatically turns OFF
when user removes hands
Maximum continuous run
time is 10 seconds
Detection time
ON feature: Immediate
OFF feature: 1 second delay
Detection range
Factory set at 2-1/4"
Faucet automatically sets the
detection range according
to the size of the basin
Discharge water
Thermal Mixing Faucet:
temperature control
Cold water - 104°F (Max)
range
(When used under standard
conditions)
Anti-scald safety
Provides the user protection
feature
against exposure to
excessive water temperature
(Thermal mixing faucet, only)
Following the Federal mandate for water efficiency
outlined in the Environmental Protection Act of 1992,
Faucets can be rated for water consumption based on
two categories: flow rate and water consumption.
With the “Water Consumption” standard, a faucet
must not use more than 0.25 gallons of water per
cycle. The TOTO® faucet with a 10 second cycle uses
0.09 gallons of water, or 0.5 gallons per minute. This is
a 64% below the base line of 0.25 gallons per cycle.
Furthermore, an innovative design feature
incorporated into all TOTO electronic faucets is an
"ON-DEMAND" mode. This means that the faucet will
only delver water as needed and will not run the entire
duration of its rated cycle - either 10 or 60 seconds.
This guarantees additional water savings.
TOTO uses water consumption because it is the most
accurate method of measuring water use. This method
of measurement can be incorporated into water usage
calculations for various efficiency programs. For more
information, please consult www.totousa.com.
*Water pressures over 80 psi are not recommended for most
plumbing fixtures.
5-3/4" (146mm)
5-3/4" (146mm)
2"
(50mm)
2"
(50mm)
9-1/8"
(231mm)
5-7/8"
(149mm)
9-1/8"
(231mm)
10°
5-7/8"
(149mm)
10-1/4"
(260mm)
10-1/4"
(260mm)
Water supply
31"
(787mm)
6"
(152mm)
F.L.
20-3/4"
(527mm)
34"
(864mm)
HOT
1-1/2"
(38mm)
COLD
8"(203mm)
10-1/4"
(260mm)
1-3/16"
(30mm)
5-1/2"
(140mm)
Single Supply
F.L.
6"
(152mm)
1"
(25mm)
3-3/4"
(95mm)
1"
(25mm)
10°
16-7/8"
(428mm)
17-1/8"
(436mm)
1-2/3"
(42mm)
6-1/2"
(165mm)
Thermal Mixing
Maximum deck thickness 2" (50mm)
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
#SS-00421, v.07
Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper ƛ
TEL3GW & TEL5GW Series
Helix® Wall-Mount EcoPower® Faucet
FEATURES
• Hydropower self-generating system
• Sensor faucet with laminar flow
• Self adjusting faucet with control box and
mounting hardware, less supply lines
• Wall 1/2” water supply male threaded
• NSF compliant
MODELS
• TEL3GW10#CP - Single Supply
Discharge: On-demand; Up to 10 seconds while activated.
• TEL5GW10#CP - Thermal Mixing
Discharge: On-demand; Up to 10 seconds while activated.
Controller/Mixer #: TN78-10V410
• TEL3GW60#CP - Single Supply
Discharge: On-demand; Up to 60 seconds while activated.
• TEL5GW60#CP - Thermal Mixing
Discharge: On-demand; Up to 60 seconds while activated.
Controller/Mixer #: TN78-10V460R
COLORS/FINISHES
• #CP Polished Chrome
CODES/STANDARDS
•
•
•
•
•
•
Exceeds mandatory baseline, 0.20 gallon/cycle,
of California Green Building Code, CALGreen, by
using TOTO faucets with 10 second cycle
Meets or exceeds ASME A112.18.1/CSA B125.1,
NSF 61-9, and ASSE 1070*
Certifications: IAPMO(cUPC), ASSE, State of
Massachusetts, and others
Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others
Legislative compliance: California AB 1953 &
Vermont S.152, and City of Los Angeles Water
Efficiency Ordinance
ADA compliant
*Note: ASSE 1070 supersedes ASSE1016 for non-shower point of
use devices. Applies to TEL5 series models.
PRODUCT SPECIFICATION
TOTO Model #______________ Automatic infrared
sensor activated faucet. Anti-scald, thermal mixing
chamber (thermal faucets only). Automatic sensor
adjustment on installation. Maximum discharge 0.13
gallons per 10 second cycle. Electrical components
separated from spout assembly and sealed in
waterproof compartments. All TEL5 series use an ASSE
1070 listed controller module with mixing valve. TOTO
faucets with 10 second cycle use 0.13 gallon/cycle
which is 35% below CALGreen's baseline.
TEL3GW & TEL5GW Series
Helix® Wall-Mount EcoPower® Faucet
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
•
NOTE
Warranty
Material
Power Supply
Three year warranty
Brass
Hydropower self-generating
system
Hot/Cold-water Supply Minimum required water
pressure: 20PSI
Maximum water pressure:
125PSI*
Water Supply Connect 1/2" NPSM
Water Consumption
10 Second Faucet:
0.13 gallon per cycle (max)
60 Second Faucet:
0.8 gpm (3.0 lpm)
Water Saving Function Automatically turns OFF
when user removes hands
Maximum continuous run
time is 10 or 60 seconds
Detection time
ON feature: Immediate
OFF feature: 1 second delay
Detection range
Factory set at 2-1/4"
Faucet automatically sets the
detection range according
to the size of the basin
Discharge water
Thermal Mixing Faucet:
temperature control
Cold water - 104°F (Max)
range
(When used under standard
conditions)
Anti-scald safety
Provides the user protection
feature
against exposure to
excessive water temperature
(Thermal mixing faucet, only)
Following the Federal mandate for water efficiency
outlined in the Environmental Protection Act of 1992,
Faucets can be rated for water consumption based on
two categories: flow rate and water consumption.
With the “Water Consumption” standard, a faucet
must not use more than 0.25 gallons of water per
cycle. The TOTO® faucet with a 10 second cycle uses
0.13 gallons of water. This is a 48% below the base line
of 0.25 gallons per cycle.
Furthermore, an innovative design feature
incorporated into all TOTO electronic faucets is an
"ON-DEMAND" mode. This means that the faucet will
only delver water as needed and will not run the entire
duration of its rated cycle - either 10 or 60 seconds.
This guarantees additional water savings.
TOTO uses water consumption because it is the most
accurate method of measuring water use. This method
of measurement can be incorporated into water usage
calculations for various efficiency programs. For more
information, please consult www.totousa.com.
*Water pressures over 80 psi are not recommended for most
plumbing fixtures.
ø4x40
3 screws with anchors
2-3/8”
(60mm)
7-5/16”
(186mm)
2” (50mm) to
5” (127mm)
Water Supply
2-3/8”
(60mm)
~33”
(838mm)
overall length
7-5/16”
(186mm)
2” (50mm) to
5” (127mm)
60°
HOT
COLD
Single Supply
Controller
8”
(203mm)
8-5/8”
(218mm)
6-1/4”
10-1/4” (159mm)
(260mm)
6”
(152mm)
ø4x40
3 screws with anchors
Single Supply
1-1/8”
(30mm)
6”
(152mm)
~33”
(838mm)
overall length
60°
Thermal Mixing
Controller
1-3/8” (36mm)
3-3/4” (95mm)
1” (25mm)
17-1/8” 6-5/8”
(435mm) (168mm)
1-5/8”
(42mm)
Thermal Mixing
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
#SS-00083, v.06
Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper ƛ
TEL3GC & TEL5GC Series
Helix® EcoPower® Faucet
FEATURES
• Hydropower self-generating system
• Sensor faucet with laminar flow
• Self adjusting faucet with control box and
mounting hardware, less supply lines
• 1/2” water supply male threaded
• NSF compliant
• Single-hole mount
MODELS
• TEL3GC10#CP - Single Supply
Discharge: On-demand; Up to 10 seconds while activated.
• TEL5GC10#CP - Thermal Mixing
Discharge: On-demand; Up to 10 seconds while activated.
Controller/Mixer #: TN78-10V510
• TEL3GC60#CP - Single Supply
Discharge: On-demand; Up to 60 seconds while activated.
• TEL5GC60#CP - Thermal Mixing
Discharge: On-demand; Up to 60 seconds while activated.
Controller/Mixer #: TN78-10V560
• Optional Accessories:
TN71V100S - 4" cc Cover Plate
71244T8CC - 8" cc Cover Plate
COLORS/FINISHES
• #CP Polished Chrome
CODES/STANDARDS
PRODUCT SPECIFICATION
•
TOTO Model #______________ Automatic infrared
sensor activated faucet. Anti-scald, thermal mixing
chamber (thermal faucets only). Automatic sensor
adjustment on installation. Maximum discharge 0.17
gallons per 10 second cycle. Electrical components
separated from spout assembly and sealed in
waterproof compartments. Single hole faucet with
optional 4" cc and 8" cc cover plates. All TEL5 series
use an ASSE 1070 listed controller module with mixing
valve. TOTO faucets with 10 second cycle use 0.17
gallon/cycle which is 15% below CALGreen's baseline.
•
•
•
•
•
Exceeds mandatory baseline, 0.20 gallon/cycle,
of California Green Building Code, CALGreen, by
using TOTO faucets with 10 second cycle
Meets or exceeds ASME A112.18.1/CSA B125.1,
NSF 61-9, and ASSE 1070*
Certifications: IAPMO(cUPC), ASSE, State of
Massachusetts, and others
Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others
Legislative compliance: California AB 1953 &
Vermont S.152, and City of Los Angeles Water
Efficiency Ordinance
ADA compliant
*Note: ASSE 1070 supersedes ASSE1016 for non-shower point of
use devices. Applies to TEL5 series models.
TEL3GC & TEL5GC Series
Helix® EcoPower® Faucet
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
•
NOTE
Warranty
Material
Power Supply
Three year warranty
Brass
Hydropower self-generating
system
Hot/Cold-water Supply Minimum required water
pressure: 20PSI
Maximum water pressure:
125PSI*
Water Supply Connect 1/2" NPSM
Water Consumption
10 Second Faucet:
0.17 gal. per cycle (max)
60 Second Faucet:
1.0 gpm (4.0 lpm)
Water Saving Function Automatically turns OFF
when user removes hands
Maximum continuous run
time is 10 or 60 seconds
Detection time
ON feature: Immediate
OFF feature: 1 second delay
Detection range
Factory set at 2-1/4"
Faucet automatically sets the
detection range according
to the size of the basin
Discharge water
Thermal Mixing Faucet:
temperature control
Cold water - 104°F (Max)
range
(When used under standard
conditions)
Anti-scald safety
Provides the user protection
feature
against exposure to
excessive water temperature
(Thermal mixing faucet, only)
Following the Federal mandate for water efficiency
outlined in the Environmental Protection Act of 1992,
Faucets can be rated for water consumption based on
two categories: flow rate and water consumption.
With the “Water Consumption” standard, a faucet
must not use more than 0.25 gallons of water per
cycle. The TOTO® faucet with a 10 second cycle uses
0.17 gallons of water. This is a 32% below the base line
of 0.25 gallons per cycle.
Furthermore, an innovative design feature
incorporated into all TOTO electronic faucets is an
"ON-DEMAND" mode. This means that the faucet will
only delver water as needed and will not run the entire
duration of its rated cycle - either 10 or 60 seconds.
This guarantees additional water savings.
TOTO uses water consumption because it is the most
accurate method of measuring water use. This method
of measurement can be incorporated into water usage
calculations for various efficiency programs. For more
information, please consult www.totousa.com.
*Water pressures over 80 psi are not recommended for most
plumbing fixtures.
4-15/16"
(125mm)
1"
(25mm)
30°
6-5/8"
(169mm)
30°
10-1/4"
(260mm)
10-1/4"
(260mm)
Water supply
31"
(787mm)
6"
(152mm)
20-3/4"
(527mm)
34"
(864mm)
HOT
1-1/2"
(38mm)
COLD
8" (203mm)
10-1/4"
(260mm)
F.L.
Single Supply
1-3/16"
(30mm)
5-1/2"
(140mm)
4-15/16"
(125mm)
1"
(25mm)
F.L.
6"
(152mm)
1"
(25mm)
3-3/4"
(95mm)
1"
(25mm)
6-5/8"
(169mm
16-7/8"
(428mm)
17-1/8"
(436mm)
1-2/3"
(42mm)
6-1/2"
(165mm
Thermal Mixing
Maximum deck thickness 2" (50mm)
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
#SS-00418, v.06
Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper ƛ
TEL3GK & TEL5GK Series
Axiom® EcoPower® Faucet
FEATURES
• Hydropower self-generating system
• Sensor faucet with laminar flow
• Self adjusting faucet with control box and
mounting hardware, less supply lines
• 1/2” water supply male threaded
• NSF compliant
• Single-hole mount
MODELS
• TEL3GK10#CP - Single Supply
Discharge: On-demand; Up to 10 seconds while activated.
• TEL5GK10#CP - Thermal Mixing
Discharge: On-demand; Up to 10 seconds while activated.
Controller/Mixer #: TN78-10V510
• TEL3GK60#CP - Single Supply
Discharge: On-demand; Up to 60 seconds while activated.
• TEL5GK60#CP - Thermal Mixing
Discharge: On-demand; Up to 60 seconds while activated.
Controller/Mixer #: TN78-10V560
COLORS/FINISHES
• #CP Polished Chrome
CODES/STANDARDS
•
•
•
•
•
•
Exceeds mandatory baseline, 0.20 gallon/cycle,
of California Green Building Code, CALGreen, by
using TOTO faucets with 10 second cycle
Meets or exceeds ASME A112.18.1/CSA B125.1,
NSF 61-9, and ASSE 1070*
Certifications: IAPMO(cUPC), ASSE, State of
Massachusetts, and others
Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others
Legislative compliance: California AB 1953 &
Vermont S.152, and City of Los Angeles Water
Efficiency Ordinance
ADA compliant
*Note: ASSE 1070 supersedes ASSE1016 for non-shower point of
use devices. Applies to TEL5 series models.
PRODUCT SPECIFICATION
TOTO Model #______________ Automatic infrared
sensor activated faucet. Anti-scald, thermal mixing
chamber (thermal faucets only). Automatic sensor
adjustment on installation. Maximum discharge 0.17
gallons per 10 second cycle. Electrical components
separated from spout assembly and sealed in
waterproof compartments. All TEL5 series use an ASSE
1070 listed controller module with mixing valve. TOTO
faucets with 10 second cycle use 0.17 gallon/cycle
which is 15% below CALGreen's baseline.
TEL3GK & TEL5GK Series
Axiom® EcoPower® Faucet
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
•
NOTE
Warranty
Material
Power Supply
Three year warranty
Brass
Hydropower self-generating
system
Hot/Cold-water Supply Minimum required water
pressure: 20PSI
Maximum water pressure:
125PSI*
Water Supply Connect 1/2" NPSM
Water Consumption
10 Second Faucet:
0.17 gal. per cycle (max)
60 Second Faucet:
1.0 gpm (4.0 lpm)
Water Saving Function Automatically turns OFF
when user removes hands
Maximum continuous run
time is 10 or 60 seconds
Detection time
ON feature: Immediate
OFF feature: 1 second delay
Detection range
Factory set at 2-1/4"
Faucet automatically sets the
detection range according
to the size of the basin
Discharge water
Thermal Mixing Faucet:
temperature control
Cold water - 104°F (Max)
range
(When used under standard
conditions)
Anti-scald safety
Provides the user protection
feature
against exposure to
excessive water temperature
(Thermal mixing faucet, only)
Following the Federal mandate for water efficiency
outlined in the Environmental Protection Act of 1992,
Faucets can be rated for water consumption based on
two categories: flow rate and water consumption.
With the “Water Consumption” standard, a faucet
must not use more than 0.25 gallon of water per cycle.
The TOTO® faucet with a 10 second cycle uses 0.17
gallon of water. This is a 32% below the base line of
0.25 gallon per cycle.
Furthermore, an innovative design feature
incorporated into all TOTO electronic faucets is an
"ON-DEMAND" mode. This means that the faucet will
only delver water as needed and will not run the entire
duration of its rated cycle - either 10 or 60 seconds.
This guarantees additional water savings.
TOTO uses water consumption because it is the most
accurate method of measuring water use. This method
of measurement can be incorporated into water usage
calculations for various efficiency programs. For more
information, please consult www.totousa.com
*Water pressures over 80 psi are not recommended for most
plumbing fixtures.
6-5/16"
(160mm)
1-3/16"
(30mm)
4-11/16"
(119mm)
10-1/4"
(260mm)
10-1/4"
(260mm)
Water supply
31"
(787mm)
6"
(152mm)
20-3/4"
(527mm)
HOT
F.L.
Single Supply
1-3/16"
(30mm)
5-1/2"
(140mm)
F.L.
4-11/16"
(119mm)
34"
(864mm)
1-1/2"
(38mm)
COLD
8"(203mm)
10-1/4"
(260mm)
6-5/16"
(160mm)
1-3/16"
(30mm)
6"
(152mm)
1"
(25mm)
3-3/4"
(95mm)
1"
(25mm)
16-7/8"
(428mm)
17-1/8"
(436mm)
1-2/3"
(42mm)
6-1/2"
(165mm)
Thermal Mixing
Maximum deck thickness 2" (50mm)
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
#SS-00415, v.06
Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper ƛ
TEL3GT & TEL5GT Series
Fordham® EcoPower® Faucet
FEATURES
• Hydropower self-generating system
• Sensor faucet with laminar flow
• Self adjusting faucet with control box and
mounting hardware, less supply lines
• 1/2” water supply male threaded
• NSF compliant
• Single-hole mount
MODELS
• TEL3GT10#CP - Single Supply
Discharge: On-demand; Up to 10 seconds while activated.
• TEL5GT10#CP - Thermal Mixing
Discharge: On-demand; Up to 10 seconds while activated.
Controller/Mixer #: TN78-10V510
• TEL3GT60#CP - Single Supply
Discharge: On-demand; Up to 60 seconds while activated.
• TEL5GT60#CP - Thermal Mixing
Discharge: On-demand; Up to 60 seconds while activated.
Controller/Mixer #: TN78-10V560
• Optional Accessories:
TN71V100S - 4" cc Cover Plate
71244T8CC - 8" cc Cover Plate
COLORS/FINISHES
• #CP Polished Chrome
CODES/STANDARDS
•
•
•
•
•
•
Exceeds mandatory baseline, 0.20 gallon/cycle,
of California Green Building Code, CALGreen, by
using TOTO faucets with 10 second cycle
Meets or exceeds ASME A112.18.1/CSA B125.1,
NSF 61-9, and ASSE 1070*
Certifications: IAPMO(cUPC), ASSE, State of
Massachusetts, and others
Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others
Legislative compliance: California AB 1953 &
Vermont S.152, and City of Los Angeles Water
Efficiency Ordinance
ADA compliant
*Note: ASSE 1070 supersedes ASSE1016 for non-shower point of
use devices. Applies to TEL5 series models.
PRODUCT SPECIFICATION
TOTO Model #______________ Automatic infrared
sensor activated faucet. Anti-scald, thermal mixing
chamber (thermal faucets only). Automatic sensor
adjustment on installation. Maximum discharge 0.17
gallons per 10 second cycle. Electrical components
separated from spout assembly and sealed in
waterproof compartments. Single hole faucet with
optional 4" cc and 8" cc cover plates. All TEL5 series
use an ASSE 1070 listed controller module with mixing
valve. TOTO faucets with 10 second cycle use 0.17
gallon/cycle which is 15% below CALGreen's baseline.
TEL3GT & TEL5GT Series
Fordham® EcoPower® Faucet
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
•
NOTE
Warranty
Material
Power Supply
Three year warranty
Brass
Hydropower self-generating
system
Hot/Cold-water Supply Minimum required water
pressure: 20PSI
Maximum water pressure:
125PSI*
Water Supply Connect 1/2" NPSM
Water Consumption
10 Second Faucet:
0.17 gal. per cycle (max)
60 Second Faucet:
1.0 gpm (4.0 lpm)
Water Saving Function Automatically turns OFF
when user removes hands
Maximum continuous run
time is 10 or 60 seconds
Detection time
ON feature: Immediate
OFF feature: 1 second delay
Detection range
Factory set at 2-1/4"
Faucet automatically sets the
detection range according
to the size of the basin
Discharge water
Thermal Mixing Faucet:
temperature control
Cold water - 104°F (Max)
range
(When used under standard
conditions)
Anti-scald safety
Provides the user protection
feature
against exposure to
excessive water temperature
(Thermal mixing faucet, only)
Following the Federal mandate for water efficiency
outlined in the Environmental Protection Act of 1992,
Faucets can be rated for water consumption based on
two categories: flow rate and water consumption.
With the “Water Consumption” standard, a faucet
must not use more than 0.25 gallons of water per
cycle. The TOTO® faucet with a 10 second cycle uses
0.17 gallons of water. This is a 32% below the base line
of 0.25 gallons per cycle.
Furthermore, an innovative design feature
incorporated into all TOTO electronic faucets is an
"ON-DEMAND" mode. This means that the faucet will
only delver water as needed and will not run the entire
duration of its rated cycle - either 10 or 60 seconds.
This guarantees additional water savings.
TOTO uses water consumption because it is the most
accurate method of measuring water use. This method
of measurement can be incorporated into water usage
calculations for various efficiency programs. For more
information, please consult www.totousa.com.
*Water pressures over 80 psi are not recommended for most
plumbing fixtures.
4-15/16"
(125mm)
1"
(25mm)
30°
6-5/8"
(169mm)
30°
10-1/4"
(260mm)
10-1/4"
(260mm)
Water supply
31"
(787mm)
6"
(152mm)
F.L.
20-3/4"
(527mm)
34"
(864mm)
HOT
1-1/2"
(38mm)
COLD
8"(203mm)
10-1/4"
(260mm)
1-3/16"
(30mm)
5-1/2"
(140mm)
Single Supply
4-15/16"
(125mm)
1"
(25mm)
F.L.
6"
(152mm)
1"
(25mm)
3-3/4"
(95mm)
1"
(25mm)
6-5/8"
(169mm)
16-7/8"
(428mm)
17-1/8"
(436mm)
1-2/3"
(42mm)
6-1/2"
(165mm)
Thermal Mixing
Maximum deck thickness 2" (50mm)
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
#SS-00416, v.06
Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper ƛ
TEL3LGW & TEL5LGW Series
Wall-Mount Gooseneck EcoPower® Faucet
FEATURES
• Hydropower self-generating system
• Sensor faucet with aerated flow
• Self adjusting faucet with control box and
mounting hardware, less supply lines
• 1/2” water supply male threaded
MODELS
• TEL3LGW10#CP - Single Supply
Discharge: On-demand; Up to 10 seconds while activated.
• TEL5LGW10#CP - Thermal Mixing
Discharge: On-demand; Up to 10 seconds while activated.
Controller/Mixer #: TN78-10V710
COLORS/FINISHES
• #CP Polished Chrome
CODES/STANDARDS
•
Exceeds mandatory baseline, 0.20 gallon/cycle, of
California Green Building Code, CALGreen
• Meets or exceeds ASME A112.18.1/CSA B125.1
and ASSE 1070*
• Certifications: IAPMO(cUPC), ASSE, State of
Massachusetts, and others
• Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others
• Legislative compliance: California Green Code and
City of Los Angeles Water Efficiency Ordinance
• ADA compliant
*Note: ASSE 1070 supersedes ASSE1016 for non-shower point of
use devices. Applies to TEL5 series models.
PRODUCT SPECIFICATION
TOTO Model #______________ Automatic infrared
sensor activated faucet. Anti-scald, thermal mixing
chamber (thermal faucets only). Automatic sensor
adjustment on installation. Maximum discharge 0.09
gallons per 10 second cycle. Electrical components
separated from spout assembly and sealed in
waterproof compartments. All TEL5 series use an
ASSE 1070 listed controller module with mixing valve.
Both faucets use 0.09 gallon/cycle which is 55% below
CALGreen's baseline.
TEL3LGW & TEL5LGW Series
Wall-Mount Gooseneck EcoPower® Faucet
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
•
NOTE
Warranty
Material
Power Supply
Three year warranty
Brass
Hydropower self-generating
system
Hot/Cold-water Supply Minimum required water
pressure: 20PSI
Maximum water pressure:
125PSI*
Water Supply Connect 1/2" NPSM
Water Consumption
0.09 gallons per cycle (max) /
0.5 gallons per minute
Water Saving Function Automatically turns OFF
when user removes hands
Maximum continuous run
time is 10 seconds
Detection time
ON feature: Immediate
OFF feature: 1 second delay
Detection range
Factory set at 2-1/4"
Faucet automatically sets the
detection range according
to the size of the basin
Discharge water
Thermal Mixing Faucet:
temperature control
Cold water - 104°F (Max)
range
(When used under standard
conditions)
Anti-scald safety
Provides the user protection
feature
against exposure to
excessive water temperature
(Thermal mixing faucet, only)
Following the Federal mandate for water efficiency
outlined in the Environmental Protection Act of 1992,
Faucets can be rated for water consumption based on
two categories: flow rate and water consumption.
With the “Water Consumption” standard, a faucet
must not use more than 0.25 gallons of water per
cycle. The TOTO® faucet with a 10 second cycle uses
0.09 gallons of water, or 0.5 gallons per minute. This is
a 64% below the base line of 0.25 gallons per cycle.
Furthermore, an innovative design feature
incorporated into all TOTO electronic faucets is an
"ON-DEMAND" mode. This means that the faucet will
only delver water as needed and will not run the entire
duration of its rated cycle - either 10 or 60 seconds.
This guarantees additional water savings.
TOTO uses water consumption because it is the most
accurate method of measuring water use. This method
of measurement can be incorporated into water usage
calculations for various efficiency programs. For more
information, please consult www.totousa.com.
*Water pressures over 80 psi are not recommended for most
plumbing fixtures.
- Not recommended for 2 x 4 wall installation.
- Access to back side of mounting surface is required for installation of spout mounting bracket.
- Drilling is required for anti-rotation screw installation.
- Plywood reinforcement is recommended for Drywall installation.
Dimensions:
Inch (mm)
2" (50mm)
1-3/8" (36mm)
5-9/16"
(142mm)
7-1/2"
(190mm)
Lavatory or finished wall
MAX. Wall Thickness*
(Mounting Surface)
2” (50mm)
MIN. space req’mt in WALL
from finished wall
9-15/16"
4” (100mm)
**Spout Hole Diameter
1-1/8" (28mm)
10˚
(251mm)
1-3/8"
(35mm)
7"
(177mm)
10-1/4"
(260mm)
Water supply
31"
(787mm)
10-1/4"
(260mm)
6"
(152mm)
F.L.
20-3/4"
(527mm)
Single Supply
1-3/16"
(30mm)
5-1/2"
(140mm)
HOT
COLD
8"(203 mm)
Distance from Spout
Mounting Hole to
M5 Anti-Rotation*
screw: 15/16" (24mm)
1-1/2"
(38 mm)
6"
(152mm)
1"
(25mm)
3-3/4"
(95 mm)
1"
(25 mm)
16-7/8"
(428mm)
34"
(864mm)
17-1/8"
(436mm)
1-5/8"
(42 mm)
6-1/2"
(165mm)
F.L.
Thermal Mixing
*Spout has the anti-rotation feature with M5 set screw on Mounting Bracket and is good for Stainless Steel sinks installation.
**Spout Hole Diameter
MAX. 1-1/2” (38mm)
for Stainless Steel Sinks
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
#SS-00615, v.01
Printed in U.S.A. | © TOTO USA 02/11 | Printed on recycled paper ƛ
TEL3GM & TEL5GM Series
Ryohan® EcoPower® Faucet
FEATURES
• Hydropower self-generating system
• Sensor faucet with laminar flow
• Self adjusting faucet with control box and
mounting hardware,less supply lines
• 1/2" water supply male threaded
• Spout with special PVD finish designed to match
Ryohan Suite
• Grid drain with cap included
• NSF compliant
• Single-hole mount
MODELS
• TEL3GM10#RY - Single Supply
Discharge: On-demand; Up to 10 seconds while activated.
• TEL5GM10#RY - Thermal Mixing
Discharge: On-demand; Up to 10 seconds while activated.
Controller/Mixer #: TN78-10V410
• TEL3GM60#RY - Single Supply
Discharge: On-demand; Up to 60 seconds while activated.
• TEL5GM60#RY - Thermal Mixing
Discharge: On-demand; Up to 60 seconds while activated.
Controller/Mixer #: TN78-10V460R
COLORS/FINISHES
PRODUCT SPECIFICATION
• #RY "Ryohan" PVD finish
TOTO Model #______________ Automatic infrared
sensor activated faucet. Anti-scald, thermal mixing
chamber (thermal faucets only). Automatic sensor
adjustment on installation. Maximum discharge 0.13
gallons per 10 second cycle. Electrical components
separated from spout assembly and sealed in
waterproof compartments. All TEL5 series use an ASSE
1070 listed controller module with mixing valve. TOTO
faucets with 10 second cycle use 0.13 gallon/cycle
which is 35% below CALGreen's baseline.
CODES/STANDARDS
•
•
•
•
•
•
Exceeds mandatory baseline, 0.20 gallon/cycle,
of California Green Building Code, CALGreen, by
using TOTO faucets with 10 second cycle
Meets or exceeds ASME A112.18.1/CSA B125.1,
NSF 61-9, and ASSE 1070*
Certifications: IAPMO(cUPC), ASSE, State of
Massachusetts, and others
Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others
Legislative compliance: California AB 1953 &
Vermont S.152, and City of Los Angeles Water
Efficiency Ordinance
ADA compliant
*Note: ASSE 1070 supersedes ASSE1016 for non-shower point of
use devices. Applies to TEL5 series models.
TEL3GM & TEL5GM Series
Ryohan® EcoPower® Faucet
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
•
NOTE
Warranty
Material
Power Supply
Three year warranty
Brass
Hydropower self-generating
system
Hot/Cold-water Supply Minimum required water
pressure: 20PSI
Maximum water pressure:
125PSI*
Water Supply Connect 1/2" NPSM
Water Consumption
10 Second Faucet:
0.13 gallon per cycle (max)
60 Second Faucet:
0.8 gpm (3.0 lpm)
Water Saving Function Automatically turns OFF
when user removes hands
Maximum continuous run
time is 10 or 60 seconds
Detection time
ON feature: Immediate
OFF feature: 1 second delay
Detection range
Factory set at 2-1/4"
Faucet automatically sets the
detection range according
to the size of the basin
Discharge water
Thermal Mixing Faucet:
temperature control
Cold water - 104°F (Max)
range
(When used under standard
conditions)
Anti-scald safety
Provides the user protection
feature
against exposure to
excessive water temperature
(Thermal mixing faucet, only)
6-5/8"
2-3/4"
(70mm)
(168mm)
Furthermore, an innovative design feature
incorporated into all TOTO electronic faucets is an
"ON-DEMAND" mode. This means that the faucet will
only delver water as needed and will not run the entire
duration of its rated cycle - either 10 or 60 seconds.
This guarantees additional water savings.
TOTO uses water consumption because it is the most
accurate method of measuring water use. This method
of measurement can be incorporated into water usage
calculations for various efficiency programs. For more
information, please consult www.totousa.com.
*Water pressures over 80 psi are not recommended for most
plumbing fixtures.
Faucet
6-5/8"
(168mm)
75°
8"
(203mm)
8-5/8”
(218mm)
1-1/4"
(159mm)
1-1/8"
(30mm)
Please confirm the basin dimension of lavatory, to which the faucet will be installed,
making sure that it has recommended minimum dimensions of (L x W: 15" x 15").
Single Supply
2-3/4"
(70mm)
75°
Thermal Mixing Controller
HOT
COLD
10-1/4"
(260mm)
8-1/8"
(207mm)
1-3/4"(45mm)
Single Supply
Controller
6"
(152mm)
With the “Water Consumption” standard, a faucet
must not use more than 0.25 gallons of water per
cycle. The TOTO® faucet with a 10 second cycle uses
0.13 gallon of water. This is a 48% below the base line
of 0.25 gallons per cycle.
8-1/8"
(207mm)
1-3/4"(45mm)
Faucet
Water
Supply
Following the Federal mandate for water efficiency
outlined in the Environmental Protection Act of 1992,
Faucets can be rated for water consumption based on
two categories: flow rate and water consumption.
6"
(152mm)
1-3/8" (36mm)
3-3/4" (95mm)
1" (25mm)
17-1/8"
(435mm)
6-5/8"
(168mm)
1-5/8"
(42mm)
Faucet hole diameter: Min. 28mm (~ 1-1/16")
to Max. 35mm (~ 1-3/8")
Thermal Mixing
Maximum deck thickness 2" (50mm)
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
#SS-00419, v.06
Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper ƛ
TES_ADC-05 & TES_ADC-12 Series
Sensor Operated TOTO® Soap Dispenser
FEATURES
UÊÊÊ -i˜ÃœÀʜ«iÀ>Ìi`Êvœ>“ˆ˜}ÊÜ>«Ê`ˆÃ«i˜ÃiÀ
UÊÊÊ -iv‡>`ÕÃ̈˜}ÊÃi˜ÃœÀÊëœÕÌÊ܈̅ÊL>ÃiÊ՘ˆÌ]
Ê “œÕ˜Ìi`ʅ>À`Ü>ÀiÊ>˜`ÊÃÕ««Þʏˆ˜iÃ
UÊÊÊ *œˆÃ…i`Ê
…Àœ“iÊ«>Ìi`
UÊÊÊ -ˆ˜}i‡…œiʓœÕ˜Ì
UÊÊÊ ,iµÕˆÀi`Ê̜ÊÕÃiÊ/"/"Ê-œ>«
MODELS
UÊÊÊ /-£
‡äxʇÊ"˜iÊëœÕÌ
Ê ˆÃ«i˜ÃiÀÊ>˜`ʜ˜iÊ£°äÈÊ}>œ˜ÊÌ>˜ŽÊ܈̅ʣȿÊx¸Ê­x“®Ê
ÌÕLiÊ>˜`ÊVœÀ`
UÊÊÊ /-Ó
‡äxʇÊ/ܜÊëœÕÌÃÊÊ
Ê ˆÃ«i˜ÃiÀÊ>˜`ʜ˜iÊ£°äÈÊ}>œ˜ÊÌ>˜ŽÊ܈̅ʣȿÊx¸Ê­x“®Ê
ÌÕLiÊ>˜`ÊVœÀ`
CODES/STANDARDS
UÊÊÊ iiÌÃÊ>˜`ÊiÝVii`ÃÊ1£™x£]Ê
-Ê
ÓÓ°ÓʛÈn
UÊÊÊ /-Î
‡äxʇÊ/…ÀiiÊëœÕÌÃÊ
Ê ˆÃ«i˜ÃiÀÊ>˜`ʜ˜iÊ£°äÈÊ}>œ˜ÊÌ>˜ŽÊ܈̅ʣȿÊx¸Ê­x“®Ê UÊÊÊ iÀ̈wV>̈œ˜Ã\Ê1
UÊÊÊ œ`iÊ
œ“«ˆ>˜Vi\Ê ]Ê
ÌÕLiÊ>˜`ÊVœÀ`
UÊÊÊ /-Î
‡£ÓʇÊ/…ÀiiÊ-«œÕÌÃÊ­-«iVˆ>Ê"À`iÀ®
Ê ˆÃ«i˜ÃiÀÊ>˜`ʜ˜iÊ£°äÈÊ}>œ˜ÊÌ>˜ŽÊ>˜`Ê
Ê œ˜iÊx°nÊ}>œ˜ÊÃÕLÊÌ>˜ŽÊ܈̅ÊΙ¿Êx¸Ê­£Ó“®Ê
Ê ÌÕLiÊ>˜`ÊVœÀ`
UÊÊÊ /-{
‡£ÓʇʜÕÀÊ-«œÕÌÃÊ­-«iVˆ>Ê"À`iÀ®
Ê ˆÃ«i˜ÃiÀÊ>˜`ÊÌܜʣ°äÈÊ}>œ˜ÊÌ>˜ŽÃÊ>˜`Ê
Ê œ˜iÊx°nÊ}>œ˜ÊÃÕLÊÌ>˜ŽÊ܈̅ÊΙ¿Êx¸Ê­£Ó“®Ê
Ê ÌÕLiÊ>˜`ÊVœÀ`
UÊÊÊ /-x
‡£ÓʇʈÛiÊ-«œÕÌÃÊ­-«iVˆ>Ê"À`iÀ®
Ê ˆÃ«i˜ÃiÀÊ>˜`ÊÌܜʣ°äÈÊ}>œ˜ÊÌ>˜ŽÃÊ>˜`Ê
Ê œ˜iÊx°nÊ}>œ˜ÊÃÕLÊÌ>˜ŽÊ܈̅ÊΙ¿Êx¸Ê­£Ó“®Ê
Ê ÌÕLiÊ>˜`ÊVœÀ`
UÊÊÊ /-È
‡£ÓʇÊ-ˆÝÊ-«œÕÌÃÊ­-«iVˆ>Ê"À`iÀ®
Ê ˆÃ«i˜ÃiÀÊ>˜`ÊÌܜʣ°äÈÊ}>œ˜ÊÌ>˜ŽÃÊ>˜`Ê
Ê œ˜iÊx°nÊ}>œ˜ÊÃÕLÊÌ>˜ŽÊ܈̅ÊΙ¿Êx¸Ê­£Ó“®Ê
Ê ÌÕLiÊ>˜`ÊVœÀ`
UÊÊÊ Û>ˆ>Li\
Ê /"/"Ê-œ>«Ê­-œ`Ê-i«>À>ÌiÞ®
Ê {Ê>œ˜ÃʇÊ/-£Ê­*>VŽ>}iʜvÊ{]Ê£Ê}>°Êi>V…®
Ê xÊ>œ˜ÃʇÊ/-xÊ­*>VŽ>}i`Ê>ÃÊ£]ÊxÊ}>°ÊVœ˜Ì>ˆ˜iÀ®
Ê xxÊ>œ˜ÃʇÊ/-xxÊ­*>VŽ>}i`Ê>ÃÊ£]ÊxxÊ}>°Ê`ÀՓ®
COLORS/FINISHES
UÊÊÊ ›
*Ê*œˆÃ…i`Ê
…Àœ“i
PRODUCT SPECIFICATION
/"/"®Êœ`iÊ œ°ÊÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚÚ
Õ̜“>̈Vʈ˜vÀ>Ài`ÊÃi˜ÃœÀÊ>V̈Û>Ìi`]ÊÜ>«Ê`ˆÃ«i˜ÃiÀÊ
܈̅ʣ°äÈÊ}>œ˜ÊÜ>«ÊÌ>˜ŽÊ>˜`Êx°nÊ}>œ˜ÊÃÕLÊÌ>˜ŽÊ
vœÀÊëiVˆ>ÊœÀ`iÀ°ÊÕ̜“>̈VÊÃi˜ÃœÀÊ>`ÕÃ̓i˜Ìʜ˜Ê
ˆ˜ÃÌ>>̈œ˜°
TES_ADC-05 & TES_ADC-12 Series
Sensor Operated TOTO® Soap Dispenser
SPECIFICATIONS
UÊÊÊ 7>ÀÀ>˜ÌÞÊÊ
UÊÊÊ TOTO®Ê-œ>«Ê
Ê Ê
Ê Ê
Ê Ê
UÊÊÊ *œÜiÀÊÃÕ««ÞÊ
Ê Ê
UÊÊÊ i˜}̅ʜvÊ*œÜiÀÊ
Ê -Õ««ÞÊ
œÀ`Ê
UÊÊÊ />˜ŽÊ
>«>VˆÌÞÊ
Ê Ê
Ê Ê
Ê Ê
UÊÊÊ -œ>«ÊˆÃ«i˜Ãˆ˜}Ê
Ê +Õ>˜ÌˆÌÞÊ
UÊÊÊ i˜}̅ʜvÊ
œÀ`ÊvœÀÊ
Ê />˜ŽÊ̜Ê-«œÕÌÊ
UÊÊÊ ˆÃ«i˜Ãˆ˜}Ê/ˆ“iÀÊ
Ê `ÕÃÌ>LˆˆÌÞÊ
UÊÊÊ iÌiV̈œ˜ÊÀ>˜}iÊ
INSTALLATION NOTES
/…ÀiiÊ9i>ÀÊ7>ÀÀ>˜ÌÞI
/-£Ê‡Ê{Ê>œ˜Ã
­*>VŽ>}iʜvÊ{]Ê£Ê}>°Êi>°®
/-xʇÊxÊ>œ˜Ã
ˆÃ«i˜ÃiÀʅœiÊ`ˆ>“iÌiÀÊrÊ£¸Ê‡Ê£‡£Én¸°
­*>VŽ>}i`Ê>Ãʜ˜iÊxÊ}>°ÊVœ˜Ì>ˆ˜iÀ®
˜«ÕÌ\Ê
Ê£Óä6ÊÈäÊâ
"ÕÌ«ÕÌ\ÊÓ{6
x£¸Ê­£°Î“®
£°äÈÊ>œ˜Ê­"«Ìˆœ˜>Êx°nÊ>œ˜
Ì>˜ŽÊ>Û>ˆ>LiÊvœÀÊ̜Ì>Ê
V>«>VˆÌÞʜvÊÈ°nÊ}>œ˜Ã
vœÀÊÎÊëœÕÌʓœ`iÊœÀÊnÊ}>œ˜ÃÊÊ
܈̅Ê{³ÊëœÕÌʓœ`iÃ®Ê
>V̜ÀÞÊÃiÌ̈˜}Ê>ÌÊ£“Ê­vœ>“®
£È¿Êx¸Ê­x“®]Ê
ëiVˆ>ÊœÀ`iÀÊΙ¿Êx¸Ê­£Ó“®Ê
/ˆ“ˆ˜}ÊVœ˜ÌÀœi`ÊvÀœ“Êä°Ó‡Óä
ÃiVœ˜`Ã
{¸Ê­££ä““®
/…iÃiÊëiVˆwV>̈œ˜ÃÊ>ÀiÊÃÕLiVÌÊ̜ÊV…>˜}iÊ܈̅œÕÌʘœÌˆVi°
I>ˆÕÀiÊ̜ÊÕÃiÊ/"/"Ê-œ>«Ê܈Êۜˆ`ÊÜ>ÀÀ>˜ÌÞ°
TES1ADC-05
WALL SURFACE
TES3ADC-12
(Special Order)
Air Deflation
Hose
39' 5" (12m)
Tube and Cord
16' 5" (5m)
Tube and Cord
Depth: 8-1/4 (210mm)
15-3/4
(400mm)
16' 5" (5m)
Connecting Tube
1.06 gallon tank
FLOOR SURFACE
5.8 Gallon Tank
14-3/16
(360mm)
1.06 gallon tank
Not to be scaled
>݈“Õ“Ê`iVŽÊ̅ˆVŽ˜iÃÃÊӸʭx䓓®
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
#SS-00084, v.04
Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper !
HDR100#GY
Sensor Activated Clean Dry™ High Speed Hand Dryer
FEATURES
• AC powered hand dryer, equipped with very fast
and quiet motor providing 224 mph air speed with
only 62 dB noise rating
• Takes only 12 seconds to dry hands
• Touch free infra red sensor activation with power
saving function which turns the motor off
automatically when hands are removed or after 60
seconds of use
• Drip tray to prevent water from trickling to the floor
• Hard wired
COLORS/FINISHES
• #GY Gray
CODES/STANDARDS
• Meets or exceeds UL507, CSA C22.2 #113-M1984
• Certifications: Intertek/ETL
• Code Compliance: NEC, CEC
PRODUCT SPECIFICATION
TOTO® Model No. _____________________________
Automatic infrared sensor activated, high speed hand
dryer. 120 V AC power hardwiring required. Decibel
rating of 62 dB for low noise level while providing 224
mph air speed for fast drying. Low power consumption
of 510 Watts. Drain Tray to collect water from hands.
HDR100#GY
Sensor Activated Clean Dry™ High Speed Hand Dryer
SPECIFICATIONS
INSTALLATION NOTES
•
•
•
For handicapped installation, refer to codes. Recess
mounting will be required so that the front surface
is not mare than 4" (102mm) from finished wall.
Maximum height of air blower outlet from finished
floor is 47-1/4" (1200mm) to comply with ADA
Guidelines, ANSI A117.1 and CSA B651 requirements.
•
•
•
•
•
•
•
•
Warranty
Power Connection
Power Rating
One Year Warranty
Hardwired
120V AC, 4.25 Amps, 60 Hz,
510 W
Power Saving Function Automatically turns OFF when
hands are removed or after 60
seconds of use
Decibel Rating
62dB
Air Speed
224 mph (100 meters/
second)
Dry Time
12 seconds*
Drain Tray Capacity
0.20 gal (700 ml)
Size
9-5/8” x 18-1/2” x 6-5/16”
Weight
10 lbs (4.5kg)
Operating Temperature 32°-104°F (0°-40°C)
*Per tests performed at TOTO Lab.
These dimensions and specifications are subject to change without notice.
Power Fuse
B
ELECTRICAL
INLET
7/8” (22mm)
DIA. HOLE
7-13/16”
(199mm)
7-1/8”
(180mm)
8-7/8”
(224mm)
9-5/8”
(245mm)
Motor
W
G
18-1/2”
(470mm)
#Recommended mounting
bracket heights from floor are
as follow:
-Male/Female: 53” (1346 mm)
-Children: 47” (1194 mm)
-Handicapped: 45” (1143 mm)
* 6-5/16”
(162mm)
9.5/8”
(245mm)
TOP COVER
ASSY UNIT*
DRAIN TRAY
ASSY*
DRAIN TRAY
CLEARANCE
FOR DRAIN TRAY**
9-5/8”
(245mm)
7”
(177mm)
4-5/16”
(110mm)
Ø4.5X30 (mm)
SCREW
POWER CABEL
(HARDWIRING)
Ø4.5X30 (mm)
SCREW
#
W
Power
Switch
DIA. MOUNTING
HOLES (4)
5/32” (4mm)
6-5/16”
(162mm)
5/8”
7-13/16”
(199mm) (16mm)
B
Motor
P3
P1-2
B
2-1/4”
(57mm)
9-7/16”
(240mm)
Power
Connector
B=BLACK
R=RED
W=WHITE
Bu=BLUE
G=GREEN
10-3/8”
(263mm)
P1-1
W
P7
W
P2
3-1/16ࠦ
(77mm)
2-1/4”
(57mm)
18-1/2”
(470mm)
P6 P5 P4
W Bu R
3 HOLE
BRACKET
DIA. 5/32”
(4mm)
6-5/16”
(160mm)
Control
Assembly
9-7/16”
(240mm)
Sensor
ROUGH-IN
6-11/16”
(170mm)
18-1/2”
(470mm)
WIRING DIAGRAM
3-15/16”
(100mm)
FINISHED
Ø4.5X30 (mm)
SCREW
5/8”
(16mm)
FLOOR
WALL
*Top Cover Assy Unit and Drain Tray Assy are two separate parts.
**Clearance is required in order to take off the tray for cleaning and maintenance.
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
# SS-00381, v.03
Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper ƛ
HDR110#SS
Sensor Activated Clean Dry™ High Speed
Concealed Hand Dryer
FEATURES
• AC powered hand dryer, equipped with very fast
and quiet motor providing 224 mph air speed with
only 62 dB noise rating
• Takes only 12 seconds to dry hands
• Touch free infra red sensor activation with power
saving function which turns the motor off
automatically when hands are removed or after 60
seconds of use
• Drip tray to prevent water from trickling to the floor
• Hard wired
• Mounts flush with the wall for clean design
• Flush mounting deters vandalism
• Quality, attractive construction with stainless
steel body
COLORS/FINISHES
• #SS Stainless Steel
CODES/STANDARDS
•
•
•
•
Meets or exceeds UL507, CSA C22.2 #113-M1984
Certifications: Intertek/ETL
Code Compliance: NEC, CEC
ADA compliant
PRODUCT SPECIFICATION
TOTO® Model No. _____________________________
Automatic infrared sensor activated, high speed hand
dryer. 120 V AC power hardwiring required. Decibel
rating of 58dB for low noise level while providing 224
mph air speedfor fast drying. Low power consumption
of 510 Watts. Drain Tray to collect water from hands.
HDR110#SS
Sensor Activated Clean Dry™ High Speed Concealed Hand Dryer
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
•
•
INSTALLATION NOTES
Warranty
Material
Power Connection
Power Rating
One Year Warranty
For handicapped installation, refer to codes. Maximum
Stainless Steel
height of an blower outlet from finished floor is
Hardwired
47-1/4" (1200mm) to comply with ADA Guidelines
120V AC, 4.25 Amps, 60 Hz, ANSI A117.1 and CSA B651 requirements.
510 W
Power Saving Function Automatically turns OFF when
hands are removed or after 60
seconds of use
Decibel Rating
58dB
Air Speed
224 mph (100 meters/
second); 19,950 LFM
(linear feet per minute)
Dry Time
12 seconds*
Drain Tray Capacity
0.27 gal (950 ml)
Size
12-5/8” x 28-3/4” x 6-7/16”
Weight
22 lbs (10 kg)
Operating Temperature 32°-104°F (0°-40°C)
*Per tests performed at TOTO Lab.
These dimensions and specifications are subject to change without notice.
ROUGH-IN
*1-9/16″ (40mm)
P1-1
W
Control
Assembly
Power
Connector
B
P7
W
P1-2
B
Power Fuse
15A
P2
3-9/16″ (90mm)
FROM STUD TO
BRACKET HOLE
2”X4”
STUD
11-1/2″
(292mm)
5-1/8″
(130mm)
FINISHED
WALL
POWER CABEL
(HARDWIRING)
*1-9/16″ (40mm)
FROM FINISHED WALL
TO BRACKET HOLES
2”X4”
STUD
COMPARTMENT SIZE
11-3/8” x 5-3/8” x 11-1/2”
11-13/16″ (300mm)
(289mm x 137mm x 292mm)
OPEN WALL
3-1/8″ (80mm)
FROM STUD TO
BRACKET HOLE
5-1/8″(130mm)
Motor
P3
Motor
W
26-5/16″
(668mm)
P6
W
B=BLACK
W=WHITE
G=GREEN
FROM FINISHED WALL
TO BRACKET HOLES
6-7/16″
(164mm)
1-9/16″ (40mm)
G
28-3/4″
(730mm)
9-15/16″
(252mm)
26-5/16″ (668mm)
27-9/16″ - 27-5/8″ (700±2 mm)
OPEN WALL
TOP COVER
2″
(50mm)
DRAIN TRAY
12-5/8″
(320mm)
1-5/16″
(34mm)
FINISHED
WALL
Recommended mounting
bracket heights from floor are
#
Sensor
-Male/Female: 30” (762 mm)
-Children: 24” (610 mm)
-Handicapped: 22” (559 mm)
#
WIRING DIAGRAM
FINISHED FLOOR
*WALL THICKNESS REQUIREMENT: MIN 3/16 in (5mm) TO MAX. 1-3/16 (30mm)
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
# SS-00427, v.02
Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper ƛ
FBY1500P
Enameled Cast Iron Bathtub
FEATURES
•
•
•
•
•
60-3/8" x 36-1/4" x 22-1/4"
Elegant, deep soaking design
Cast iron construction provides years of durability
Slip-resistant surface
Stainless steel grab bars
COLORS/FINISHES
• Shell Color
#01 Cotton
#12 Sedona Beige
CODES/STANDARDS
•
•
•
Meets and exceeds ASME A112.19.1/CSA B45.2
Certifications: IAPMO(cUPC), State of
Massachusetts, City of Los Angeles and others
Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others
PRODUCT SPECIFICATION
The Enameled Cast Iron Bathtub construction shall
prove the ultimate in strength and durability, while a
slip-resistant surface enhances safety in the bath. Cast
Iron Bathtub shall be TOTO Model FBY1500P___ .
FBY1500P
Enameled Cast Iron Bathtub
INSTALLATION NOTES
SPECIFICATIONS
•
•
•
•
•
•
Size
Depth
Warranty
Material
Shipping Weight
Shipping Dimensions
A frame cutout guide is available for drop-in
installation. A template is available for under mount
installation.
60-3/8"L x 36-1/4"W
22-1/4"
Lifetime Limited Warranty
Enameled Cast Iron
353 lbs.
76-15/16"L x 40-3/8"W x
23-5/8"H
60-3/8" (1533mm)
3-15/16"
(100mm)
53-11/16" (1363mm)
2-3/4" (70mm)
18-1/8" (460mm)
36-1/4"
(920mm)
19 -5/8"
(500mm)
2-3/16"
(55mm)
18-1/8" (460mm)
8-1/4"
(210mm)
19-11/16"
(500mm)
DIA 2 -3/8" 2-3/4"
(60mm)
(70mm)
22 -1/4"
(565mm)
30-11/16" (780mm)
12-7/8"
(327mm)
8 -1/4"
(210 mm)
8 -1/4"
(210 mm)
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
#SS-00312, v.02
Printed in U.S.A. | © TOTO LTD. 07/09 | Printed on recycled paper ƛ
FBY1515
Enameled Cast Iron Bathtub
FEATURES
•
•
•
•
59-3/4" x 30" x 14-11/16"
Apron front
Cast-iron construction provides years of durability
Slip-resistant surface
COLORS/FINISHES
• Shell Color
#01 Cotton
#12 Sedona Beige
MODELS
• FBY1515LP
Left hand drain
PRODUCT SPECIFICATION
• FBY1515RP
Right hand drain
The Enameled Cast Iron Bathtub construction shall
prove the ultimate in strength and durability, while a
slip-resistant surface enhances safety in the bath. Cast
Iron Bathtub shall be TOTO Model FBY1515___.
CODES/STANDARDS
•
•
•
Meets and exceeds ASME A112.19.1/CSA B45.2
Certifications: IAPMO(cUPC), State of
Massachusetts, City of Los Angeles and others
Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others
FBY1515
Enameled Cast Iron Bathtub
SPECIFICATIONS
•
•
•
•
•
•
Size
Depth
Warranty
Material
Shipping Weight
Shipping Dimensions
59-3/4"L x 30"W
14-11/16"
Lifetime Limited Warranty
Enameled Cast Iron
370.7 lbs.
62-5/8"L x 32-7/8"W x
18-1/2"H
59-3/4" (1517mm)
55" (1397mm)
2-3/8"
(60mm)
2-3/8" (60mm)
2-3/8" (60mm)
14-11/16"
(373mm)
30"
(762mm)
24-5/8"
(626mm)
2-3/16"
(55mm)
15-5/16"
(389mm)
7-7/8"
(200mm)
3" (76mm)
7-7/8"
(200mm)
5/16" (8mm)
13-1/4" (337mm)
14-3/8"
(365mm)
1/8"
(3.5mm)
31-1/2" (800mm)
12-7/8" (327mm)
DIA 2-3/8"
(60 mm)
2-3/4"
(70mm)
1/8"
(3.5mm)
8-11/16"
(220mm)
8-11/16"
(220mm)
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
#SS-00423, v.02
Printed in U.S.A. | © TOTO LTD. 07/09 | Printed on recycled paper ƛ
FBY1525
Enameled Cast Iron Bathtub
FEATURES
•
•
•
•
•
59-3/4" x 32" x 16-3/4"
Cast-iron construction provides years of durability
Slip-resistant surface
Apron front
Tile-in flanges on 3 sides
COLORS/FINISHES
• Shell Color
#01 Cotton
#12 Sedona Beige
MODELS
• FBY1525LP
Left hand drain
PRODUCT SPECIFICATION
• FBY1525RP
Right hand drain
The Enameled Cast Iron Bathtub construction shall
prove the ultimate in strength and durability, while a
slip-resistant surface enhances safety in the bath. Cast
Iron Bathtub shall be TOTO Model FBY1525___.
CODES/STANDARDS
•
•
•
Meets and exceeds ASME A112.19.1/CSA B45.2
Certifications: IAPMO(cUPC), State of
Massachusetts, City of Los Angeles and others
Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others
FBY1525
Enameled Cast Iron Bathtub
SPECIFICATIONS
•
•
•
•
•
•
Size
Depth
Warranty
Material
Shipping Weight
Shipping Dimensions
59-3/4"L x 32"W
16-3/4"
Lifetime Limited Warranty
Enameled Cast Iron
397 lbs.
62-5/8"L x 34-13/16"W x
20-1/4"H
2-15/16" (75mm)
59-3/4" (1517mm)
53-1/16" (1347mm)
2-3/4" (70mm)
16" (406mm)
32" (813mm)
26-1/8" (663mm)
ø2-3/16" (ø55mm)
7 7/8" (200mm)
2-3/4" (70mm)
3/8" (10mm)
15-1/4" (387mm)
16-3/4" (425mm)
16-5/16" (415mm)
3/16" (4mm)
30-1/2" (774mm)
ø2-3/8" (ø60mm)
3/16 (4mm) 3/8" (10mm)
12-7/8" (327mm)
8-3/8" (212mm)
8-3/8" (213mm)
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
#SS-00313, v.04
Printed in U.S.A. | © TOTO LTD. 07/09 | Printed on recycled paper ƛ
FBY1550P
Enameled Cast Iron Bathtub
FEATURES
•
•
•
•
59-1/16" x 31-1/2" x 23-1/4"
Elegant, drop in styling
Cast-iron construction provides years of durability
Slip-resistant surface
COLORS/FINISHES
• Shell Color
#01 Cotton
#12 Sedona Beige
CODES/STANDARDS
•
•
•
Meets and exceeds ASME A112.19.1/CSA B45.2
Certifications: IAPMO(cUPC), State of
Massachusetts, City of Los Angeles and others
Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others
PRODUCT SPECIFICATION
The Enameled Cast Iron Bathtub construction shall
prove the ultimate in strength and durability, while a
slip-resistant surface enhances safety in the bath. Cast
Iron Bathtub shall be TOTO Model FBY1550P___.
FBY1550P
Enameled Cast Iron Bathtub
INSTALLATION NOTES
SPECIFICATIONS
•
•
•
•
•
•
Size
Depth
Warranty
Material
Shipping Weight
Shipping Dimensions
59-1/16"L x 31-1/2"W
23-1/4"
Lifetime Limited Warranty
Enameled Cast Iron
346 lbs.
63-3/8"L x 35-13/16"W x
28-5/16"H
59-1/16"
(1500mm)
2-3/4"
(70mm)
A frame cutout guide is available for drop-in
installation. A template is available for under mount
installation.
3-3/8"
(85mm)
B
ø2-3/16"
(ø55mm)
2-9/16"
(65mm)
31-1/2"
(800mm)
B
2-3/4"
(70mm) ø2-3/8"
(ø60mm)
B-B
8-7/16"
(215mm)
19-11/16"
(500mm) 23-1/4"
(590mm)
34-7/16"
(875mm)
13"
(330mm)
10"
(255mm)
10"
(255mm)
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
# SS-00410, v.01
Printed in U.S.A. | © TOTO LTD. 07/09 | Printed on recycled paper ƛ
FBY1700P
Enameled Cast Iron Bathtub
FEATURES
•
•
•
•
66" x 32" x 18-5/16"
Luxurious, deep soaking drop in design
Cast-iron construction provides years of durability
Slip-resistant surface
COLORS/FINISHES
• Shell Color
#01 Cotton
#12 Sedona Beige
CODES/STANDARDS
•
•
•
Meets and exceeds ASME A112.19.1/CSA B45.2
Certifications: IAPMO(cUPC), State of
Massachusetts, City of Los Angeles and others
Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others
PRODUCT SPECIFICATION
The Enameled Cast Iron Bathtub construction shall
prove the ultimate in strength and durability, while a
slip-resistant surface enhances safety in the bath. Cast
Iron Bathtub shall be TOTO Model FBY1700P___.
FBY1700P
Enameled Cast Iron Bathtub
INSTALLATION NOTES
SPECIFICATIONS
•
•
•
•
•
•
Size
Depth
Warranty
Material
Shipping Weight
Shipping Dimensions
66"L x 32"W
18-5/16"
Lifetime Limited Warranty
Enameled Cast Iron
309 lbs.
70-1/16"L x 36-5/16"W x
23-13/16"H
A frame cutout guide is available for drop-in
installation. A template is available for under mount
installation.
66" (1676mm)
59-1/16" (1500mm)
2-3/16" (55mm)
3" (76mm)
ø2-3/16" (ø55mm)
32" (813mm)
27-11/16" (703mm)
16" (406.5mm)
8-1/2" (216mm)
13/16" (20mm)
ø2-3/8" (ø60mm)
17-1/2" (445mm)
2-3/4" (70mm)
16-15/16" (430mm)
33-7/16" (850mm)
13" (330mm)
9-1/4" (235mm)
9-1/4" (235mm)
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
#SS-00314, v.02
Printed in U.S.A. | © TOTO LTD. 07/09 | Printed on recycled paper ƛ
FBY1715
Enameled Cast Iron Bathtub
FEATURES
•
•
•
•
•
65-3/4" x 32" x 16-3/4"
Apron front
Cast-iron construction provides years of durability
Slip-resistant surface
Tile-in flanges on 3 sides
COLORS/FINISHES
• Shell Color
#01 Cotton
#12 Sedona Beige
MODELS
• FBY1715LP
Left hand drain
• FBY1715RP
Right hand drain
CODES/STANDARDS
•
•
•
Meets and exceeds ASME A112.19.1/CSA B45.2
Certifications: IAPMO(cUPC), State of
Massachusetts, City of Los Angeles and others
Code Compliance: UPC, IPC, NSPC, NPC Canada,
and others
PRODUCT SPECIFICATION
The Enameled Cast Iron Bathtub construction shall
prove the ultimate in strength and durability, while a
slip-resistant surface enhances safety in the bath. Cast
Iron Bathtub shall be TOTO Model FBY1715___.
FBY1715
Enameled Cast Iron Bathtub
SPECIFICATIONS
•
•
•
•
•
•
Size
Depth
Warranty
Material
Shipping Weight
Shipping Dimensions
65-3/4"L x 32"W
16-3/4"
Lifetime Limited Warranty
Enameled Cast Iron
441 lbs.
68-11/16"L x 35-1/16"W x
20-1/4"H
65-3/4" (1670mm)
58-1/4" (1480mm)
3-3/8" (85mm)
2-3/4" (70mm)
ø2-3/16" (ø55mm)
32" (813mm)
25-5/16" (643mm)
16" (406.5mm)
7-7/8" (200mm)
3/8" (10mm)
ø2-3/8" (ø60mm)
2-3/4" (70mm)
15-1/4" (387mm)
16-5/16" (415mm)
16-3/4" (425mm)
3/16" (4mm)
37" (940mm)
12-7/8" (327mm)
3/16" (4mm)
3/8" (10mm)
8-1/4" (210mm)
8-1/4" (210mm)
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
#SS-00315, v.03
Printed in U.S.A. | © TOTO LTD. 07/09 | Printed on recycled paper ƛ
TOTO U.S.A., INC.
1155 SOUTHERN ROAD
MORROW, GA 30260
800-350-8686
www.totousa.com
www.totology.com
#K122010
Printed in U.S.A. 08/2010
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising