LED Raceway - Strand Lighting
Strand Distributed Dimming
LED Raceway
eS21 LED Raceway
(Fixtures and accessories are sold separately and shown for illustrative purposes only)
Strand Lighting is pleased to introduce the next generation of our popular eS21 Dimmer Strips the eS21 LED raceway; a perfect
extension of our EC21 range of installed dimmer cabinets. These modular raceways are assembled to order with your choice of any
combination of 3 power modules.
Our IGBT dimmer module features an Insulated Gate Bipolar Transistor power device that works in tandem with a dedicated
microprocessor to control almost any type of lighting load required. Our new relay module features two switched circuits each with
a DMX output designed to power Rama and Pacific 80V halogen spotlights, our PL1 and PL3 LED luminaires or new VARI❋LITE VLX
wash family of LED automated sources. Each relay can be individually controlled to “Power down” your rig when it is not in use.
Our new quad LED driver module can be used to control and power our PL Wash or Color Kinetics Color Blast luminaires.
The eS21 LED is designed to deliver control and power to your rig of conventional and LED sources as an easy to use and set up
solution to the challenge of delivering power and control to a wide range of sources.
Features
●
Available to order with any combination of dual dimmer,
dual relay, or Quad LED power supply modules
●
DMX512 I/O
●
Choice of 3 power input locations - top, bottom and back
●
Wide range of load connector options on power modules
●
Simple set up with back lit LCD display and easy button
access. LCD blacks out when not in use. Full configuration
and set up for low voltage LED luminaires from Selecon and
Color Kinetics.
●
Quiet, convection cooled operation
●
Hangers available for wall and pipe mount applications
●
CE Marked
SPECIFICATION SUBMITTAL
CONSULTANT:
PROJECT NAME:
MODEL NUMBER | QUANTITY:
DATE:
PROJECT NUMBER:
APPROVED BY:
Strand Distributed Dimming
LED Raceway
eS21 LED Raceway Components & Features
LCD Display and Menu System
Dual, IGBT Dimmer Modules
The Processor’s LCD Display and Menu System provides local control
for accessing all system status information and for making
configuration changes to the particular dimmer strip. User-defined
operational selections and dimmer strip status includes:
The eS21 LED Raceway offers a choice of 3 dimmer modules. A dual
module with a shared 2.5kW feed, a fully rated dual 2.5kW dimmer
module and a single 5.0kW module allowing users to customize their
strip to a wide range of loads. Each dual dimmer module includes:
•
eS21 LED strip start address for dimmer and relay modules and
auto address for LED luminaires
•
Fully Digital Dimmer operation with Forward and Reverse phase
dimming (automatic or user-selectable)
•
Simple ID and addressing for LED luminaires including 8/16 bit
operation, luminaire reset, White, RGB and RGBAW address
offsets. Address review for user console patching.
•
Compatible with new LED drivers that require reverse phase
operation
•
Quiet convection cooled dual IGBT dimmers
•
Raceway and individual dimmer status reporting (including
dimmer levels, connected loads, operational modes, error
reporting, dimmer operating temperatures, voltages, and more)
•
No dimmer room required and no added cooling needed
•
Energy efficient - only a 2.5 volt insertion loss
•
Dimming mode selections (per dimmer) for Forward Phase
Control, Reverse Phase Control, dedicated line-voltage LED
dimming, and non-dim
•
Solid-state dimming technology with adjustable transition (rise)
time up to 650 ms for quiet operation
•
Adjust dimmer transition times to optimize performance. Auto
mode is available to insure the best performance under all
conditions.
•
Low Harm mode to reduce neutral harmonics
•
Automatic Overload and Short Circuit protection
•
Operational voltage selections (per dimmer) to prolong lamp life
•
Local Focus buttons and LED status indicators
•
A selection of 13 different dimming curves - each dimmer can
be set to its own dimming curve as desired
Quad, LED Luminaire Power Supply
•
Optional password protection to lock menu (to prevent unwanted
changes)
LCD Display & Menu
Our LED power supply is designed to deliver power and data to any
Selecon PL Wash luminaire or Color Kinetics Color Blast. Easy to set
up and configure users will never need a special programming tool to
address a fixture again. Our auto ID system displays what luminaire
type is connected and allows each user to set up their system quickly
and easily.
•
Control connectors for 4 low voltage PL Wash or Color Kinetics
Color Blast luminaires
•
Auto ID to simplify patching
•
Copy command to speed set up
•
No luminaire addressing required
•
Processor set up for 8 and 16-bit fade operation
•
Local focus button with push and hold configuration for white,
RGB and RGBAW luminaires
LCD Display & Menu Detail
Dual, Relay Modules
Each eS21 LED Raceway relay module contains two relays designed
to connect a total load of 25 amps.
•
High performance mechanical relays for years of reliable
operation
•
Addressable DMX control of each of two relays per module
•
Choice of load connectors each with an adjacent DMX512
output connector
Strand Distributed Dimming
LED Raceway
eS21 LED Raceway Mounting Hardware
Pipe Mount Bracket (71726)
Wall Mount Bracket (71728)
"C" Style Clamp or Cheeseboro
Clamp mounting hole
Wall Mount Holes
Raceway
mounting holes
The 71726 Pipe Mount Bracket is
designed to mount to a eS21 LED
Raceway and to allow installation of
71729 Hook Clamps or 71351
Cheeseboro Clamps (each sold
separately) for truss or pipe hanging
applications. Note, two Pipe Mount
Brackets are required to mount an
eS21 LED Raceway.
Single Pipe Mount
Hanging Bracket (71732)
Raceway
mounting holes
The 71728 Wall Mount Bracket is
used to permanently mount the eS21
LED Raceway to a wall. Note, two
wall Mount Brackets are required to
mount a eS21 LED Raceway.
Wall Mount Holes
Double Pipe Mount
Hanging Bracket (71733)
Rigging (mounting)
point for bracket
Rigging (mounting)
point for bracket
U-Bolt clamp for
mounting a pipe
(above raceway)
Raceway
mounting holes
U-Bolt clamp for
mounting a single pipe
The 71732 Single Pipe Mount
Hanging Bracket is designed to
mount to a eS21 LED Raceway and
to allow a single 1-1/2" (Schedule
40) pipe to be hung underneath.
Note, At least two Pipe Mount
Brackets are required to mount a
eS21 LED Raceway (or as required
by code).
Hook Clamp (71729)
Raceway
mounting holes
U-Bolt clamp for
mounting a pipe
(below raceway)
Dual Clamp Mount
Hanging Bracket (71511)
The 71729 Hook Clamp is used to mount eS21
Dimmer Strips beneath pipe or aluminum tube (truss)
up to 50 mm in diameter. Each Hook Clamp installs on
a 71726 Pipe Mount bracket (sold separately) and
allows Dimmer Strips to be quickly relocated. Note, two
Hook Clamps are required to mount an eS21 Dimmer
Strip.
Cheeseboro clamp (71351)
for mounting to a single pipe
Raceway
mounting holes
Cheeseboro Style Clamp (71351)
The 71351 Cheeseboro Style Mounting Clamp is
used to mount an eS21 LED Raceway above
either a 1½” schedule 40 pipe or a 2”
aluminum tube (truss). Each Cheeseboro Clamp
installs on a 71725 Pipe Mount bracket (sold
separately) and allows eS21 LED Raceways to
be quickly relocated. Note, two Cheeseboro
Style Mounting Clamps are required for each
eS21 LED Raceway.
The 71733 Double Pipe Mount
Hanging Bracket is designed to
mount to a eS21 LED Raceway and
to allow two 1-1/2" (Schedule 40)
pipes to be hung underneath and
over the raceway. Note, At least two
Pipe Mount Brackets are required to
mount a eS21 LED Raceway (or as
required by code).
Cheeseboro clamp (71351)
for mounting to a single pipe
3-3/16"
~ 2-0"
The 71511 Dual Clamp Mount
Hanging Bracket is supplied with two
71351 clamps and is designed to
mount to a eS21 LED Raceway and
to allow a single 1-1/2" (Schedule
40) pipe to be hung underneath.
Note, At least two Dual Clamp Mount
Brackets are required to mount a
eS21 LED Raceway (or as required
by code).
Strand Distributed Dimming
LED Raceway
Ordering Information
Cat No.
Description
eS21 LED Raceway
eS21 LED Raceway Accessories
71900 - XX - YY - ZZ
Hooks / Mounting / Hangers / DMX Termination
XX = Module 1 - YY = Module 2 - ZZ = Module 3
71729
71351
71726
Choose any combination of module options below for each module
position and Strand Lighting will construct the eS21 LED Raceway
to your specification.
eS21 LED Raceway Module Options
DA
DB
DC
RC
RD
CE
BP
Dual 1.2kW dimmer module with CEE17 connectors
Dual 2.5kW dimmer module with CEE17 connectors
Single 5kW dimmer module with CEE17 connectors
Relay module with CEE17 output connectors
Relay module with Powercon output connectors
Low voltage, Quad LED module
Blank panel - no power, no connectors
71728
71732
71733
71511
71346
Hook Clamp
Cheeseboro Clamp
Pipe Mount Bracket (for use with Cheeseboro or
Pipe Clamps - sold separately)
Wall Mount Bracket
Single Pipe Mount Hanging Bracket
Double Pipe Mount Hanging Bracket
Dual Clamp Mount Hanging Bracket (includes 2 each
71351)
DMX512 Terminator
Spare Processor
71701
Spare Processor / LCD Display Unit
Example Configuration:
eS21 LED Raceway Product Number: 71900-CE-RD-CE
This configuration has two modules for driving LED luminaires (CE
modules) and one relay module for PL1 or PL3 luminaires (RD relay
module with Powercon output connectors).
Note, eS21 LED Raceways do not include input power cables.
(230V Models)
Technical Information
(120V Models)
C
Number of Modules:
3 modules - as per customer order
Frequency:
50/60Hz
Dimmer Module Output:
230 / 240 VAC (user selectable)
Ambient Temperature:
0 to 40 degrees C
Minimum Load:
1 watt
Humidity:
5%-95% Non condensing
Cooling:
Natural Convection
Maximum Load per Dimmer: 2.5kW per Dual Dimmer Module
(max.)
5.0kW per Single Dimmer Module
Height:
152.4 mm
Forward or Reverse (user selectable
or automatic)
Depth:
101.6 mm
Transition (Rise) Time:
Up to 650 ms (automatic adjustable)
Length:
2,286.0 mm
Insert Loss:
Max 2.5 volts
Weight:
Depends on modules ordered
Power Feed:
3-phase 4 wire 230/420 volts
("WYE" power service) 25 amps;
Terminal block
Load Connector Types:
Powercon or CEE17
Dimming Phase:
Philips Strand Lighting
Dallas
10911 Petal Street
Dallas, Texas 75238
Tel: (214) 647-7880
Fax: (214) 647-8031
New York
267 5th Ave, 4th Floor
New York, NY 10016
Tel: (212) 213-8219
Fax: (212) 532-2593
Auckland
19-21 Kawana Street
Northcote, Auckland 0627
New Zealand
Tel: + 64 9 481 0100
Fax: + 64 9 481 0101
Asia
Room 6-10,
20/F Delta House
3 On Yiu Street
Shatin, N.T. Hong Kong
Tel: + 852-2757-3033
Fax: + 852-2757-1767
071811_EUA
www.strandlighting.com
© Philips Group 2011
All rights reserved.
The Company reserves the right
to make any variation in design or
construction to the equipment
described. E&OE
Europe
European Service & Distribution Centre
Marssteden 152
Enschede 7547 TD
the Netherlands
Tel: +31-53-4500424
Fax: +31-53-4500425
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement