Manual

Copyright © 2010 Rovi Corporation. All rights reserved. Rovi and the Rovi logo are trademarks of Rovi Corporation and/or its subsidiaries.

This document contains confidential information of Rovi Corporation. This document, and the software described in it, are furnished under license only and may only be used or copied in accordance with the terms of such license and applicable copyright laws. The information in this document is provided for informational use only and is subject to change without notice.

Rovi assumes no responsibility or liability for any errors or inaccuracies that may appear in this document or for any omissions.

Except as permitted by such license and applicable copyright laws, no part of this publication may be reproduced, stored in a retrieval system, transmitted, adapted, translated in any form or by any means without prior written authorization of Rovi.

Rovi Corporation

2830 De La Cruz Boulevard

Santa Clara, CA 95050

09ROVI1204 User i-Guide Manual R16.indd 2 4/6/10 12:26:18 PM

Introducing the interactive program guide from Rovi and your cable system.

i-Guide is intuitive, intelligent and inspiring. It unlocks a world of greater choice, convenience and control so you can fully enjoy your digital cable entertainment experience.

With

Digital Cable, you have more programming choices than ever before. And with i-Guide, you can effortlessly find your favorite shows and stars on TV – you’re in control.

With 90-minutes of program listings at a glance, you’ll find i-Guide easy to use and navigate.

The

Quick Menu allows you to move easily to the programming and information you want.

You’ll be able to easily set Recordings, Reminders, Favorites and Parental Controls.

Use

Mini Guide to browse future listings while you continue to enjoy watching TV.

This manual provides you with the detailed information about important features in

i-Guide so you can get started enjoying your digital cable experience.

09ROVI1204 User i-Guide Manual R16.indd 3

1

4/6/10 12:26:19 PM

table of contents

2


table of contents

welcome to i-Guide table of contents basic navigation tips your access to digital cable

Listings By Time

Listings By Channel

Navigate Program Listings

Quick Menu

Quick Menu Icons

Main Menu

Program Information

Action Icons

Reminders

Setting Reminders

Reminder Settings

search

Search

Title Search

Saving Searches

smart channel surfing

Flip Bar

Mini Guide (Browse)

Digital Music

Access Digital Music

Local Weather

Messages

parental controls

Parental Controls Setup

Parental Controls for On Demand

View Locked Programs

Bypass or Clear Locks

Restore Locks

favorites

Favorites Lists Setup

Access Favorites Lists

Add or Delete Channels to Favorites Lists

setup

Guide Setup

Cable Box Setup

Audio Setup

Text Language Setup

Screen Saver

Parental Controls and Purchase PINs Setup

Guide Colors

Screen Position Setup

DVR Setup

digital pay-per-view

Order Pay-Per-View

PPV Information Screens

Order Pay-Per-View By Phone

Order Pay-Per-View Packages

18

19

19

19

17–19

17

17

18

19

19

20–22

20

20

21

21

10–11

10

10

11

11

11

11

12–14

12

14

14

14

14

15–16

15

16

16

1

2–3

4

9

9

9

9

7

8

8

8

6

7

6

6

5

5

5–8

5

4/6/10 12:26:19 PM


Cancel a Pay-Per-View Order

Pay-Per-View Notices

Pay-Per-View Program Started

Pay-Per-View Order Conflict

Pay-Per-View Program Missed

Adult Programming

on demand

Access On Demand

On Demand Action Icons

Watch On Demand Programs

Order On Demand Programs

Order From the On Demand Preview Banner

Expiring Programs Display

Status Bar

On Demand Packages

hdtv

digital video recorder (dvr)

Control Live TV

Playback Controls

Remote Control Arrow Buttons

Status Bar

Pause

Rewind

Fast Forward

Slow Motion

Instant Replay

Return to Live TV

SWAP Between Two Programs

Recording Programs

One-touch Recording

From Program Information

Manual Recording

Record Two Programs at Once

Two Recordings Are in Progress Overlay

Manage Schedule Conflicts

Search and Record

Actor/Director Search

Keyword Search

Saving Searches

Recording Series

Modify Series

Modify the Series Priority List

Manage Series Priorities

Manage Series Priority List

View Recorded Programs

Recorded Program Information Screens

Future Recordings

View List of Scheduled Recordings

Manage Your Recordings

DVR Setup

DVR Folders

Live Program Notice – Default “On”

DVR Clipping

Manage Series Priorities

DVR Cleanup

DVR History

Modify Recording Options

From Listings

Recording Notices

Recording Starting Notice

Changing Channels While Recording

Recording Low and Full Notices

frequently asked questions

21

22

22

22

22

22

26

34

34

35

35

33

33

34

34

31

32

32

32

30

31

31

31

29

29

30

30

28

29

29

29

27

28

28

28

27–38

27

27

27

37

38

39

39

39

39

36

36

37

37

35

35

36

36

24

24

24

25

25

23–25

23

23

23

40–48 table of contents

3

4/6/10 12:26:20 PM

basic navigation tips

basic navigation tips

In i-Guide, yellow is the highlight color. To navigate the guide, use the arrows on your remote control. The highlight appears on-screen to indicate your current selection.

Press

 buttons on your remote to move the highlight.

Press OK/Select to confirm your selection.

Press EXIT on your remote to return to watching TV.

4


your access to digital cable

Your remote control holds the key to navigating through the features of i-Guide. Words appearing in ALL CAPS refer to a specific button on the remote. Note that all remotes may not have all of the buttons.

Listings By Time

To find out what’s on TV right now, press GUIDE on your remote to access Listings By Time.

The listings grid provides a 90-minute view of programming for up to 5 channels per screen.

The current program is highlighted in yellow. Use the

 and

 buttons to navigate the listings grid. Instant program info appears in the upper left of the screen. Press OK/Select to tune to a program from the grid. Press INFO for additional information.

Listings By Channel

Press GUIDE two times to view Listings By Channel and use the for the next channel in the line-up. Use

 buttons to navigate.

 buttons to see listings

Navigate Program Listings

You can use the

 and

 buttons on your remote to quickly navigate the listings screens – up to 14 days in advance. Press OK/Select to tune to that channel or INFO for more information.

Listings are color-coded to identify types of programs.

Blue – Regular programs

Purple – Movies

Green – Sports

Light Blue – Kids’ programs

For faster searching

• Use the

PAGE

• Press the

DAY



• Press and hold



+ buttons to view listings a page at a time or

 to rapidly move ahead in time or through the channel lineup

buttons to advance ahead a day at a time


5

4/6/10 12:26:28 PM 09ROVI1204 User i-Guide Manual R16.indd 7

Quick Menu

The

Quick Menu* provides shortcuts directly to the key features of i-Guide and digital cable service.

Press the

MENU button one time and the Quick

Menu will appear over any video or guide screen.

Press the

 buttons on the remote to continuously move through the icons.


Guide Symbols to Know – Quick Menu Icons

These icons may appear on your

Quick Menu. Use the highlight and select an icon for immediate access.

 buttons on your remote to

Main Menu – go to the Main Menu

Search – search programming by category or by Title, Actor/Director or Keyword

DVR – schedule, view and manage recordings

On Demand – view On Demand menu and programs

HDTV – view list of HDTV programs, by channel or time

Favorites – view your Favorites lists

Movies – lists movies by category

Sports – lists sports events by category

Kids – lists kids programming by category

Parental Controls – lock shows or channels based on preferences

Main Menu

The Main Menu* provides access to all of the features of i-Guide and digital cable. Press the MENU button twice to view the available options, including:

•

TV Listings By Time

• Search

• Favorites

• Parental Controls and more

The Picture in Guide feature allows you to watch a show while using the guide.**

6

* Menu selections vary depending on services offered by your cable provider.

** May not be supported by all set-top boxes.


Program Information

Instant Information is available when you highlight a program in the program listings, which includes program title, start and end time, a brief program description, and indicators to identify settings such as Reminders and Recordings.


To access information while viewing listings or watching TV, press the INFO button.

Press INFO a second time to see a longer description and additional details such as actor, rating, release year, category and run time.

Action Icons

From the program information screen use the Action Icons to set a Reminder or Recording, or designate a Favorite among other options. Use and see the on-screen description.

 buttons to highlight each icon

Guide Symbols to Know – Action Icons

Go back to the previous screen

Record/Change Recording Options*

(DVR)

Set or cancel a Reminder for this program

See all the times the program will be airing

Watch this channel or program

Save the channel in your Favorites list

Place a lock on the program to restrict viewing

Order PPV, On Demand and other pay services

* Menu selections vary depending on services offered by your cable provider.


7

4/6/10 12:26:35 PM


Reminders

You can set

Reminders so you don’t miss shows you want to watch.

Setting Reminders

From the Program Info screen, highlight the icon and press OK/Select. Follow the on screen prompts to confirm the Reminder or Reminder

Settings.

Reminder Settings

Customize the frequency and timings for

Reminders.

• Use the



Reminders

buttons to set repeating

• Determine Start and End time for the

Reminder to appear on-screen – up to

15 minutes prior to the program starting and

up to two hours after the program is over

When you set a

Reminder, you have the option of bypassing

Locks* if they are placed on the program, so you can tune directly to the program without having to enter your

Locks PIN

(see Parental Controls section for more information).

* This option appears only if you have already set a Lock for that program.

8


search

Search

i-Guide provides you many ways to find your favorite shows. Select from the

Quick Menu or Search from the

Main Menu to begin. Quickly search programs by

Title, or search by category like

Movies, Sports or Kids programs or view HD and

PPV channels.

If you have a DVR, you can quickly search by

Keyword or Actor/Director. See Search and

Record in the DVR section for more information.

Title Search

Title Search allows you to find a specific program by entering the first few letters of the program name.

Select Title from the Search menu and use the

 buttons to navigate the keyboard and spell out the program title. Continue entering letters until the show you are looking for appears on the right.

If the program is not airing in the next 14 days, it won’t appear on the list.

Saving Searches

Save your search by selecting Save Search. Saving searches can be helpful when you want to quickly find a program. Simply select Saved Searches from the Search Menu to access your list of saved searches to restart or delete the search. You can save up to 16 searches at one time.


search

9

4/6/10 12:26:41 PM



Flip Bar

When you change channels, the

Flip Bar appears and provides a brief two line description about the program and other information including title, start and end time, channel, current time, program rating and settings such as

Favorites or Locks.

When you find the program you are interested in, press

INFO for more program details, or press

OK/Select to make the Flip Bar disappear.

The Flip Bar may also show other options:

Watch in HD* – When tuning to a standard definition channel, this button may appear on the left side of the Flip Bar to indicate the channel is also available in High-Definition.

Press OK/Select to tune directly to the associated HD channel.

On Demand* – Some channels may have programming available On Demand. If so, the

On Demand button may appear on the left side of the Flip Bar. Highlight the On Demand button to access On Demand programming for that network.

Mini Guide (Browse)

The Mini Guide allows you to watch television and view program listings without leaving the program you are watching or going to the full-screen guide.

To access Mini Guide, press OK/Select. Mini Guide appears on the lower 1/3 of the screen and displays two or three channels and 90 minutes of listings at a time. Use the to see listings on other channels and the



 arrows arrows to see listings at other times. At any time, press INFO or OK/Select to access program info.

The default setting for

Mini Guide is a 2-channel display. To change the display, go to

Main Menu, select

Setup, then Guide

Setup and change

“Mini Guide Cell Height.”

10

* Requires HD service from your cable provider. On Demand not available in all areas.


Digital Music

Digital Music is continuous, commercial-free music in a variety of formats.

Access Digital Music*

• Select

Digital Music from the Main Menu

or

Search Menu

• Press the

MUSIC button on the remote

(if available)

You can press

INFO for more information on each category. Select a music format and enjoy the music.

Local Weather

Get accurate, up-to-date local weather conditions and a 3-day forecast.

From the Main Menu, highlight Local Weather and press OK/Select. Use the down arrow button to see a detailed local weather forecast.

Note: Weather service not available for all locations.

Messages

Messages may be sent occasionally by your cable company to announce new services, special promotions or other information. If you have a Message, an envelope indicator will appear in the upper left corner on guide screens and a red light will appear on your set-top box. From the Main Menu, select Messages, highlight the desired Message and press OK/Select to read.


*Digital Music may not be available on all menu configurations.


11

4/6/10 12:26:47 PM


i-Guide provides a Parental Controls feature, which allows you to restrict viewing and purchases of TV programs and services based on your viewing preferences. To activate Parental Controls set a personalized 4-digit PIN to place Locks by movie ratings, TV and content ratings, channels or titles. You can also hide adult titles from being displayed on-screen.

Parental Controls Setup

Locks can be set quickly in a variety of ways anytime while watching TV or using the guide:

• Press the Lock button on your remote*

• Select the from the

Quick Menu

• Select the from any program info screen to lock a specific program

• Access Parental Controls from the Main Menu or Setup Menu to set up all Locks


Quick Menu

Program Info

Main Menu

With any of these actions, if you have not set up a PIN, you will be prompted to enter a 4-digit PIN to activate the Locks feature. If you have already set up a PIN, enter your number. (See Setup Section for more information on how to set up PINs).

12

*Not supported on all remotes.


PIN Setup Lock Options

4/6/10 12:26:53 PM

The Parental Controls feature also provides you the opportunity to lock programs and movies by ratings and content.

From the Parental Controls Button on the Main

Menu filter your locks by Movie Rating, TV Rating,

TV Content, Channel, Title, or Service.

Under TV Content, you can lock the level of explicit content based on your viewing preferences for

Violence, Language, Sexual Situations, and

Suggestive Dialogue.

Select

Movie Ratings or TV Ratings to block content by rating. The guide will automatically lock that rating and the more restrictive ratings. For example, when you lock PG-13, movies with R, NC-17 and Adult ratings will also be locked.


MOVIE

RATINGS

G

PG

PG-13

R

NC-17

Adult

TV

RATINGS

TV-Y

TV-Y7

G

TV-PG

TV CONTENT RATINGS

Violence

(FV, V)

Fantasy Violence

Language

(L)

Sexual Situations Suggestive Dialogue

(S) (D)

TV-14

TV-MA

Moderate Violence Infrequent Coarse

Intense Violence Strong Coarse

Graphic Violence Crude Indecent

Some Sexual

Situations

Situations

Explicit Sexual

Activity

Some Suggestive

Dialogue

Intensely Suggestive

Dialogue


13

4/6/10 12:26:54 PM

Parental Controls for On Demand

Parental Control settings include On Demand programming. To block all access to On Demand, select Service Locks from the Parental Controls

Menu.

View Locked Programs

To view programs and channels you have locked, enter your PIN when prompted. Locks will automatically be restored when you tune away from the channel or turn your set-top box off.


Bypass or Clear Locks

Temporarily open or clear all

Locks for easier viewing.

Under

Setup from the Main Menu, select Parental

Controls Setup, then Master Locks, and change the options from

No to Yes.

Restore Locks

Locks may be restored in any of the following ways:

• While watching TV, press the LOCK button anytime and enter your PIN

• Select Parental Controls Setup from the Setup Menu, then under Master Locks change

the options from Yes to No to turn Locks back on

• Turn the set-top box off and back on

14


favorites

The Favorites feature allows you to quickly access channels you and your family have designated as Favorites.

Favorites Lists Setup

Create and manage up to five (5)

Favorites Lists. From the Main Menu, select Setup, then

Favorites Lists Setup. Use your on screen keyboard to name your lists.

favorites

15

4/6/10 12:27:00 PM 09ROVI1204 User i-Guide Manual R16.indd 17

Access Favorites Lists

• While watching TV, press the

FAV button to skip

to your next Favorite channel on the current list

• From

TV Listings or Mini Guide, press the FAV

button to bring up a filtered guide of the channels

in your last accessed list. Press

FAV button

again to scroll through all of your

Favorites Lists –

the guide will have a tab with each list’s name

• From the

Quick Menu select the to bring up

your

Favorites Lists. If you have not yet set up

any

Favorites, simply follow the on-screen

prompts to begin a new list

favorites

Add or Delete Channels to Favorites Lists

• From the Quick Menu – select the Icon

• Select the Favorites List you want to edit

• Select the Icon to add or remove favorite channels

• You can also rename, delete, or Lock your Favorites list

• Highlight a channel in the listings and press OK/Select or FAV to add to your favorites –

a Icon will appear; Or, to remove the channel, press OK/Select or FAV and they will

be removed

• Press the Icon to confirm your Favorites channel settings

16


setup

From the Setup Menu, you can activate and customize certain i-Guide features such as the Flip Bar, Parental Control options, Cable Box settings, Audio settings, Languages and more.

Guide Setup

•

Flip Bar Position – Flip Bar can appear on top

or bottom of screen – default is bottom

•

Flip Bar Timeout – Flip Bar will stay on your

screen, from 2 to 15 seconds – default is 3 seconds

•

Channel Entry:

— Yes – automatically tunes to a channel after

2 seconds when entering channel number

from your remote – default is Yes

— No – you must enter 3 digits or press

OK/Select

when entering channel number from your remote

•

Reminder Time – Adjust the amount of time

the Reminder Notice will appear before the start

of a program, from 1–15 minutes – default is

one minute

•

Grid Cell Height – Adjust the listings grid for

single- or double-height grid display

•

Mini Guide Cell Height – Adjust the listings

display for single (3 channels) or double

(2 channels)

•

Message Indicator – Select On to make the

message envelope appear when a new message

is received

Cable Box Setup

Front LED Display

• Current Channel – displays the currently tuned

channel on the front of the cable box

• Current Time – displays the current time on the

front of the cable box

AC Outlet

•

Switched – Determines that power is available

only when the cable box is on

•

Unswitched – Allows the power to remain constant

to the outlet on the back of the cable box

Configuration – Highlight and press OK/Select to show the configuration screen, which includes information your cable company may need in the event of a problem with your service.


setup

17

4/6/10 12:27:11 PM

setup

Audio Setup

Default Audio Track

Secondary digital audio can be changed on certain networks and programs. Note that the default audio track will be set to “Channel Default,” or primary audio, which in most cases is English. You can change the default language to English, Spanish,

French, or Portuguese.

Descriptive Video Services (DVS)*

Descriptive Video Service (DVS) is an alternative audio channel which makes television more accessible to the visually impaired by providing narrated descriptions of key visual elements within a program, such as actions, subtitles, scene changes, graphics, and body language. Default setting is Off.

Audio Output – Choose if the audio output goes to your TV or to your stereo.

• TV Speaker – default setting

• Select Advanced to change the settings for

Compression and Stereo Output

Optimal Stereo

• No – Volume is unchanged from the current setting

• Yes – Volume is automatically adjusted to the optimal level

Text Language Setup

Access the Text Language Setup from the Setup

Menu to independently select language setting for the menu text. The default setting is English in most cases.

Change the default language to English, Spanish,

Canadian English or Canadian French.

From the Setup Menu, select Text Language Setup.

Choose the preferred language for the on-screen menus within i-Guide. Select Yes to confirm.

Note: Changing the language can take several minutes.

During this time, listings are not accessible.

18

*For Canadian cable providers only.


Screen Saver

A Screen Saver can be activated on your TV screen. Once the Screen Saver is set to On it will automatically engage if a guide screen is displayed for longer than the set activation time. The default is set to On.

• From the Setup Menu select Screen Saver to change the settings

• The activation time is between 1-15 minutes

Parental Controls and Purchase PINs Setup

Your

Parental Controls PIN allows you to restrict viewing of programs. Your

Purchase PIN is used to restrict pay programming purchases. Once you have setup your PINs, you can return to

Parental Controls

Setup to set up your program Locks as reviewed in the

Parental Controls section.

Use the

 buttons to make your selections, and then press

OK/Select to confirm each setting.

Guide Colors

(if available)

Select to change the color scheme of i-Guide.

Screen Position Setup

To alter your screen position:

• From the

Setup Menu, select Screen Position Setup to adjust the screen position

• Use the

 buttons on your remote until the display arrows are centered on the screen

DVR Setup

Select DVR Setup to manage:

• DVR Folders

• Live Program Extension

• DVR Clippings

The default setting is On for these options. See the

DVR section for complete information about these settings.

setup


19

4/6/10 12:27:13 PM

digital pay-per-view

i-Guide makes ordering and watching Pay-Per-View

(PPV) programs easy.

Order Pay-Per-View

From the Main Menu and Quick Menu, select PPV to go to the PPV Menu. Then select any of the PPV options to see programs available in a variety of categories.

When you find a program of interest, highlight the title and press

OK/Select for the information screen.

digital pay- per-view

Guide Symbols to Know – PPV Information Screens


Order the program, or cancel an ordered program

Set Recording Timers (Requires separate VCR

Setup or use of Digital Video Recorder)

Place a Lock on the program to restrict viewing

See all the times the program will be airing

Save this channel in your Favorites list

Indicates the program is available as part of a package

Set or cancel a Reminder

20


Order Pay-Per-View By Phone

If your cable provider offers phone ordering, the order instructions appear on-screen when you select

. Simply call the number to place your order.

Then select Continue to complete your order.

Order Pay-Per-View Packages

Your cable service may offer programs in a package by title, time block, etc. Select the title from the listings and a Icon will appear if the program is part of a package.

Cancel a Pay-Per-View Order

To cancel a

PPV order before the program starts:

• Select the ordered program in any of the listings

menus (there will be a $ sign in the

Instant

Information)

• From the information screen, select the Icon

and follow the prompts to cancel the order

Note: In some cable systems, your order will automatically be canceled if you do not tune to the program. In systems that use phone ordering, you will need to call in your cancellation.

Please check with your cable provider for the correct PPV cancellation procedure.



21

4/6/10 12:27:20 PM

Pay-Per-View Notices

Notices associated with your PPV order appear at various times to alert you to the status of your ordered program.

Pay-Per-View Program Started

A Program Started overlay will appear if you try to order a PPV program that is in progress but is within the purchase window. You may proceed with the order, but you may miss a portion of the program.

Note: The purchase window is established by your cable provider.

Pay-Per-View Order Conflict

When you order a

PPV program that airs at the same time as an existing

PPV order, you will be alerted on-screen with the option to cancel an order or keep both orders.


Pay-Per-View Program Missed

If you have ordered a

PPV program but didn’t tune to it, a

Program Missed notice will appear asking if you would like to reschedule your order.

Note: This screen will not appear in systems that use phone ordering.

Adult Programming

The Adult category, accessed from the Pay-Per-View menu, provides access to listings for adult-oriented programming. Adult programming may be purchased as a single program or as a time-block package, depending on your cable provider’s service. For your convenience, you may also restrict Adult titles from being viewed in the listings by setting Parental Controls.

See Parental Controls section for more information.

22


on demand

Enjoy movies, TV shows, music videos, and more whenever you want with On Demand*.

Access On Demand

You can access On Demand programs in several ways:

• From the ON DEMAND button on your remote

• From the Icon on the

Quick Menu

• From the

Main Menu

• From an On Demand button on the Flip Bar

• From an On Demand channel in the TV Listings

Quick Menu Main Menu Flip Bar

Guide Symbols to Know – On Demand Action Icons


Order the program, or cancel an ordered program

Tune to a program

(for free and subscription programming)

Watch a free preview


Resume play of the video

Restart the video from the beginning

Delete the title from your rented titles list

Indicates the program is available as part of a package

Cancel selection

Use the PAGE UP and PAGE DOWN buttons to advance forward or backward 5 minutes.

Times may vary.

Play / Pause

Watch On Demand Programs

Use your remote to pause, fast-forward, rewind, and stop the program. You may also use the DVR control buttons on your remote.

Rewind Fast Forward

Stop

* On Demand not available in all areas. On Demand programs may not be recorded with DVR (if available).


on demand

23

4/6/10 12:27:30 PM

Order On Demand Programs

The On Demand Menu displays a variety of programming categories. Use the

 buttons on your remote to select a category and press

OK/Select to access listings for the category, or press access sub-category menus.*

Select a title by pressing OK/Select or INFO to access detailed information, including program length, cost, rating, and description.

Order From the On Demand Preview Banner

Use the Icon from the

On Demand preview banner to easily purchase while watching the preview.

• Select the Icon and press OK/Select to

order the On Demand program

• Select the Icon and press OK/Select to

return to the On Demand information screen

To buy the program, highlight the Icon, and follow the on-screen prompts to complete your order.

If the program is available at no cost,** the Icon will appear instead of the Icon. Your selection will begin playing immediately and you can watch as often as you want during the rental period.

on demand

Expiring Programs Display

On Demand programs with a specified expiration date in the list, e.g., Ends 8/12. Programs without a specific end date will be denoted as

LC or Last

Chance.

24

* Menu label and categories vary by cable provider.

** May not be available in all areas.


Status Bar

The On Demand Status Bar displays when you press PLAY, PAUSE, REWIND, FAST FORWARD or STOP on your remote and indicates where you are in the program that is playing.

If you have stopped a program and want to come back to it later, select My Rentals* from the On Demand Menu.

• Highlight and select a title to see the information screen that displays your remaining

rental time and other program details

• Select to start watching where you left off or select to start the program from

the beginning

• Watch as many times as you want within the rental period

On Demand Packages

Some programs may be available as part of a package.

If a program is available in a package, or available with a subscription service, a notice will appear on your screen.

You can select:

Icon

to continue with the purchase,

Icon

to learn more about the package or

Icon

to cancel.

Note: Some On Demand programs that are free or part of a subscription may not appear on the

My Rentals list. These programs can be accessed at any time from the On Demand listings.

*Menu label varies by cable system.


on demand

25

4/6/10 12:27:39 PM

hdtv

If you have a high-definition television (HDTV) and subscribe to HD service through your cable provider, then you have the opportunity to enjoy your favorite shows, sports, and events in a wide-screen, high-resolution format.

To quickly access HD programming:

• From

Quick Menu select to view shows by Time or Channel or to view a list of all

HD channels

• Select HDTV from the

Main Menu

• From the

Flip Bar, when tuned to a Standard Definition channel and there is

an HD channel equivalent, a “Watch in HD” button will appear on the

Flip Bar.

Simply press

OK/Select to tune directly to the associated HD channel

hdtv

If you don’t subscribe to HD service and you tune to an HD channel, you will be notified that the channel is not available. Contact your cable provider for information on HD service.*

26

*You must have HD equipment to view HD programming.


digital video recorder (dvr)

Pause live television! Rewind and replay programs so you don’t miss a beat

.

Imagine…coming home to your own personal library of television programs, movies and sports that you can watch whenever it’s convenient for you. It’s TV on your schedule.

Record up to 90 hours of your favorite programs and view them as many times as you want, whenever you want.

Control Live TV

With a Digital Video Recorder (DVR) from your cable provider, you have the opportunity to control live TV. When you tune to a channel, the DVR automatically begins making a temporary recording of the program. Once the temporary recording begins, you can

Pause, Rewind and

Fast Forward through the recording. Your DVR will record up to two hours of Live TV.*

The live TV recording is not permanent, unless you save it to the DVR’s hard drive.

For live TV recordings, the temporary recording will be erased if you:

• Turn off the DVR

• Change channels

• Watch more than 2 hours of the same channel – after 2 hours the DVR will buffer only the

most recent 2 hours

Play

Playback Controls

You can play back your video recordings using the

Rewind

Stop

Video Control Buttons.

These buttons function like VCR controls.

Plus, you have new DVR control features, like Instant Replay and SWAP.

Fast Forward

Record

Go back to Live TV

Pause Go to DVR Menu

Play / Pause

Remote Control Arrow Buttons

The

 buttons on your remote control will control playback when you are watching a recording in progress or while watching a recorded program.

Rewind

Slow Rewind

From Pause

Fast Forward

Slow Forward

From Pause

Go to Live TV

Status Bar

The

Status Bar appears whenever you Pause, Rewind or Fast Forward a live program.

The Status Bar shows title, channel and duration of time. Green indicates the length of program in the buffer. Red indicates you are watching a DVR recording in progress. White indicates the length of multiple programs that have been recorded in the buffer.**

* Recording capacity varies.

** Recording buffer (temporary storage) for each tuner will record as long as you stay tuned to the same channel.


dvr

27

4/6/10 12:27:49 PM

Pause

You can Pause live TV anytime by pressing on your remote. For programs you’re watching live, your DVR will remain in pause for up to 90 minutes.* Pressing

Pause more than once allows frame by frame viewing. Press Play to resume the program.

Rewind

Press Rewind to rewind. Press it up to 4 times to increase Rewind speed. On the 5th press, the program resumes normal play.

Fast Forward

For live TV, Fast Forward can be activated if you have pressed Pause or Rewind. Press the to move forward. Press it up to 4 times to increase

FF speed. On the 5th press, the program resumes normal play. You can only Fast Forward up to the point of live broadcast.

dvr

Slow Motion

Use Slow Motion to access “slow-forward” and

“slow-rewind” – perfect when watching sporting events.

To activate, press Pause , then Fast Forward or Pause then Rewind . Press Play to resume regular program speed.

28

*Pause capacity depends on video format; less than two hours for HD programming.


dvr

4/6/10 12:28:03 PM

Instant Replay

With Instant Replay,* you can replay the last

15 seconds of a program. Press Replay or Page on the remote. Press repeatedly to continue skipping back in 15-second increments.

Return to Live TV

When you pause or rewind a live program, the program continues to broadcast in real time. To return to live show, press the

Live* button or on your remote.

SWAP Between Two Programs

If your DVR has two tuners, it can buffer (temporarily record) two programs at the same time – one on each tuner. The SWAP feature allows you toggle back and forth between two live shows while giving you control of both. If you change channels any other way than using the SWAP button, you will lose the buffer recording.

1. While tuned to a program, press SWAP on your remote to change tuners

2. Select a second program by changing channels or using the guide

3. Press SWAP again to toggle between the two programs

4. When recording two programs at the same time, on-screen prompts will ask if you wish

to swap tuners. Select your desired recording preference

Recording Programs

i-Guide makes it easy to schedule recordings on your DVR and build your own personal library.

You can record programs in several ways:

• One-touch right from the on your remote

• From any Program Info screen

• Set a manual recording

One-touch Recording

Press the

RECORD on your remote any time while you’re watching a program to begin recording.

From the Listings grid, just highlight the show you want to record and press the record button on your remote.

*Not all remotes have Replay and Live buttons.


dvr

29

4/6/10 12:28:14 PM

From Program Information

From any Program Information screen, highlight the button and press OK/Select to schedule a recording. Follow the on-screen prompts for additional recording options.

dvr

Manual Recording

You can set a Manual Recording for specific time or channel:

• Select DVR from the Quick Menu or Main

Menu, or My DVR button on your remote

• Select Set a Recording

• Select start and end times and day, then

press Confirm

• Select channel to record from channel list

• Select Record to confirm settings or select

Recording Options for additional options

Record Two Programs at Once

A Dual Tuner DVR allows you to set recordings for two different programs that air at the same time. While recording two programs, you can watch and control either program up to the point of live TV by using the

SWAP button on your remote.

While Watching a Show Currently Airing

• Press RECORD to record the program you

are watching

• Press SWAP to switch to the other tuner

and find the second program you want

to record

• Press RECORD when you locate the second

program you want to record

From the Guide

• Highlight a program you want to record from

any listings screen

• Press RECORD to set up the first recording

• Highlight the second program

• Press RECORD to set up the second recording

30


Two Recordings Are in Progress Overlay

When two programs are recording simultaneously and you change channels, an overlay will appear.

Follow the on screen prompts:

• Swap to view your other recording

• Continue recording, don’t change channel

• Stop recording change channel (this appears

when 2 recordings in progress and want to tune

to another channel)

Manage Schedule Conflicts

If you schedule more than two recordings for the same time, you will see a

Scheduling Conflict

screen that allows you to choose between a previously set recording and the new recording that is conflicting. Individual recordings always take priority over series recordings when there are scheduling conflicts. In case of a scheduling conflict between two series programs, additional icons will appear at the bottom of the Scheduling Conflict screen to help you determine which program to record.

Search and Record

Expanded search and record capabilities make it easy to find your favorite shows, celebrities or even subject on TV and schedule auto-recordings based on your search criteria.

Actor/Director Search

Actor/Director Search allows you to find your favorite celebrities appearing on TV.

Select Actor/Director from the Search Menu and use the

 buttons to navigate the keyboard to spell out the celebrity name – up to 25 characters. The list of available actors will begin to populate as soon you begin to enter letters, and the list will narrow as additional characters are entered.

Once you see the celebrity you want, arrow right and press OK/Select to view programs that meet your search criteria. The list can be sorted by date or alphabetically by selecting the

Sort Results button on the left side of the screen. If you don’t see your celebrity on the list, that means that there are no upcoming programming available. Save this search for quick access later.


dvr

31

4/6/10 12:28:24 PM

Keyword Search

Select

Keyword from the Search Menu and use the

 buttons to navigate the keyboard to spell out your keyword. Select

Search Now to begin the search and the list of matching results will appear.

The Keyword Search is based on any word in the program title or description. The list can be sorted by date or alphabetically by selecting

Sort Results.

Save the search criteria or set up an auto-recording.

Saving Searches

Save your search by selecting

Save Search on any results screen. Saving searches can be helpful when you want to quickly find a program, subject or celebrity. Simply select

Saved Searches from the

Search Menu to access your list of saved searches to restart or delete the search. You can save up to

16 searches at one time.

From any Search Results screen you can:

•

Sort Results – sort results by title or date

• Save Search – save your search for future reference

(save up to 16 searches)

• Auto-Record – set a DVR auto-recording of your

search results

dvr

32

Recording Series

Your

DVR allows you to record multiple episodes of a program (series) according to your preferences.

To set up a

Series Recording, begin by selecting the program from the Listings grid or from a Search results list:

• Select Record from the

Program Info screen

• Select Set Up a Series Recording

• Select the type of episode to record, such as

First run only episodes

• Specify how many recordings to save

• Specify how long to save the recording

• To access advanced series set up features,

like add minutes to the start and end times and

specify which channels to record, select the

Recording Options to review all options


Your

Series Recordings will appear in the

My Recordings list with the show title as its label.

Multiple recordings of the same show will have the same label and will be listed beginning with the most recent recordings first as default. To change your view use the

 buttons on your remote to

View By Date, View By Channel, or View By Title.

You may also modify the priority assigned to a series using the

Series Priority List.

Modify Series

From the DVR Menu select Series Recordings for a list of scheduled Series or keyword Series. From here you can change the priority of your series, or modify Series recording. To modify:

• Use the

 arrows to highlight the series,

press OK/Select to view a summary of

recording settings for that series including the

number of episodes scheduled to record in

the next 14 days

• Highlight the to modify settings. Select the

again to view and modify all settings

• Highlight the to confirm

Modify the Series Priority List

If there are scheduling conflicts in your series recordings, your DVR automatically creates a

Series Priority List. The first series you set to record has the highest priority and will be the one recorded if there is a conflict. You can easily change the recording priority of the series so that the series of your choice are recorded when a conflict exists.

• Select DVR from the Quick Menu or Main Menu

• Choose

Series Recordings

• Highlight a program and use the Page Arrows

to modify priority

Note: If you want to record two series recordings instead of an individual recording that airs at the same time, you must delete the individual recording from the

Scheduled

Recordings List (See View List of Scheduled Recordings section to cancel a recording).


dvr

33

4/6/10 12:28:29 PM

Manage Series Priorities

• To give your new recording the highest scheduling

priority and to capture the most number of

episodes for your new recording, select

High.

The screen will show you how many episodes

of the new series will be recorded and which

episodes of the old series will not be recorded

because of the conflict

• To move the new series back to the bottom of

the scheduling priority list, select

Low and the

screen will refresh and give you revised results

• Select the

Record Icon to confirm your

new settings

Guide Symbols to Know – Manage Series Priority List

Return to previous screen

Show conflicts when the new series is a low priority

Don’t record new program or series Record new program or series as shown

Show conflicts when the new series is a high priority

View Recorded Programs

From the DVR menu, select My Recordings to view your programs:

• Press My DVR on the remote (if available)

• Select from the Quick Menu

• Select DVR from the Main Menu

Use the recordings by Title, Date or Channel. Use the



 arrows on your remote to sort arrows to scroll through the list and press

OK/Select or INFO for program description and use the action icons to begin playback.

You can control playback of a recording by using the video control buttons or arrow buttons on your remote to fast-forward, rewind and pause your program.

dvr

Guide Symbols to Know – Recorded Program Information Screens


Play the recording

Start the recording from the beginning

Delete the program from My Recordings

Change the Delete Priority


34



View List of Scheduled Recordings

From the Main Menu or Quick Menu,

• Select DVR*

• Select


• See a list by day of all the programs you have

scheduled to record; use

 arrows to advance

by day

• Select a title to cancel the Scheduled Recording

or modify

Recording Options

• To give your new recording the highest scheduling

priority and to capture the most number of

episodes for your new recording, select High.

The screen will show you how many episodes

Manage Your Recordings

A recorded program remains in your My Recordings list until you decide to delete it or have set it to delete when space is needed. Your DVR will record and store up to 90 hours of standard definition programming and up to 20 hours of High Definition programming.**

There are several options you can choose to make the most efficient use of your storage space:

i-Guide gives you easy ways to manage your recordings.

DVR Setup

From the Quick Menu or Main Menu, select DVR to access DVR Setup to manage:

• DVR Folders

• Live Program Notice

• DVR Clipping

The default setting is On for these options.

You can also access DVR setup from the Setup Menu.

* Menu label may vary.

** Recording HD programming requires a DVR connection to an HD television.


dvr

35

4/6/10 12:28:40 PM

DVR Folders

DVR Folders help you keep recorded series organized and help you scroll through your recordings quickly.

DVR Folders automatically group like titles into folders. Highlight the

DVR Folders to open and scroll down to select a specific episode to watch.

Press

LAST to return to your recordings list.

Live Program Notice – Default “On”

The notice overlay will appear when a DVR recording is scheduled for a live program, such as sports or awards shows. You can choose to extend the recording time of live programs in the event the program runs longer than scheduled.

dvr

DVR Clipping

i-Guide provides a feature to accommodate recording two overlapping programs. With

DVR Clipping,

i-Guide will automatically clip the beginning of a program if there is a recording overlap when both tuners are in use. For example, while watching live

TV, a scheduled recorded program ends at 9:05, but your second recorded program is scheduled to begin at 9:00; the second program will be “clipped” so that your first program is recorded in full. Clipping happens when both tuners are in use during the recording time. If this occurs, a “clipped” notice will appear next to those programs in the

My Recordings listings.

Manage Series Priorities

From the

DVR Menu select Series Recordings to view a list of Series and Keyword Series. Use the up/down arrows

 on your remote to highlight a series. If you want to change priority of a series, use the page up/down keys on your remote to move the series up or down your list.

Select Confirm to confirm and accept your changes. The first series set to record has the highest priority and will be the one recorded if there is a conflict.

36


DVR Cleanup

From the Main Menu, select DVR Menu to access

DVR Cleanup.

DVR Cleanup allows you to delete multiple recordings with a simple check box. When you select DVR Cleanup, a DVR Cleanup screen appears, with a list of all of your recordings. To check what recordings to delete, simply highlight the corresponding box(es), then arrow left to highlight the Delete button and press OK/Select, and confirm your deletion.

DVR History

DVR History provides you with a list of recent DVR deletions or missed recordings. If a program did not record, DVR History will provide a reason why the program didn’t record or when a program was deleted.

Modify Recording Options

i-Guide gives you flexibility to manage your personal video library. You can modify your

Recording

Options at any time, as often as you like.

From the Quick Menu or Main Menu (or from

MY DVR on the remote), select DVR, then select

Future Recordings to see a list. Highlight a program title and press OK/Select or INFO.

You can also select Series Recordings to see a list of just scheduled series.


dvr

37

4/6/10 12:28:47 PM

Select from the Program Information Screen.

Select to change the Recording Options or select

to delete this program from your list of Future

Recordings.

Use the

 buttons on your remote to change the

Recording Options:

• Change the frequency of the recording, such as

every day or once a week

• Specify how many recordings to save

• Set a Save Until parameter, either until you delete

or delete automatically when space is needed

• Change the start and end times in order to catch

every minute of a program, even if it runs over

From Listings

Select your

Scheduled Recording in the listings; it will be indicated by the red dot in the

Instant Info.

Press

OK/Select or INFO and select to change your options or delete the Scheduled Recording.

From here, select to cancel the recording, or select

to see all the Recording Options.

dvr


Recording Notices

Recording Starting Notice

If you are currently watching TV, before a Scheduled

Recording begins, a notice will appear giving you the opportunity to confirm or cancel the recording. If you don’t do anything, the DVR will automatically tune to the channel and begin recording. Live TV programming that was temporarily recorded in the buffer will be erased.

Changing Channels While Recording

If two recordings are in progress* (dual-tuner DVRs only), and you attempt to change channels, a notice will appear. (Two Recordings in Progress screen)

• Select the to view the other recording

• Select the to continue recording as scheduled

• Select to cancel the current recording and

change the channel

Recording Low and Full Notices

i-Guide will advise you with an on-screen notice when available memory on the DVR is low or full.

If recording space becomes full during a recording, the recording will stop. When you schedule a recording and recording space is low, a notice will prompt you to review your DVR Recordings to delete recordings.


dvr

39

4/6/10 12:28:58 PM


Interactive Program Guide

1. Q. What are the icons (little pictures) at the bottom of the screen?

A. Quick Menu Icons are available to help you find what you’re looking for faster.

The Quick Menu lets you quickly go to other areas of the guide, such as Movies or

Favorites Menus. Once you have selected a program title by highlighting it and pressing

OK/SELECT or INFO, you can use the Action Icons on the information screens to set

Reminders and Parental Controls, schedule Recordings, BUY programs and more.

2. Q.How do I tell what the icons mean?

A. You will find descriptive text beneath the row of icons when you have an icon highlighted. This information changes as you move the yellow highlight using the arrow buttons on your remote. On Program Information screens, the Action Icons are specific to the program. For example, a BUY Icon will appear only for On Demand and Pay-Per-View programs. Playback Icons will appear only for recorded programs or On Demand titles.

3. Q. I can’t see the entire program title in the listings.

A. Some program titles are too long to fit in the space provided in the grid. You might see

“…” to indicate there is more to the title. (For example: “Third Rock from the Sun “might look like “Third Rock…”). Highlight the program and check the Instant Information area at the top of the screen for program title and other valuable information, including rating, actors, start/end times, etc.

4. Q. What is the graphic bar that appears when I change channels?

A. The Flip Bar appears for a few seconds as you’re changing channels to provide important information about programs. You will find the name of the current program, start and end times, channel number, rating and current time.

5. Q. How do I get information on programs?

A. i-Guide provides detailed information on programs, including movies and sporting events. While in a listings screen, you can access information by pressing the INFO button on your remote. While you are tuned to a program, press INFO once for Instant

Information or twice for complete information. Information includes program details like actors, ratings and a brief program synopsis. You can also set Reminders, place Parental

Controls, order On Demand movies and events and see other times a program is airing.

To remove the information screen and return to watching television, press the EXIT button on the remote.

6. Q. What is the red light on the upper left front of my box and/or what is the envelope on the screen?

A. Occasionally your cable provider may send message to let you know of new services and special promotions. To read the message, go to the Main Menu and select Messages.

You can keep or delete the Message once you have opened it.


40


7. Q. How do I set my digital audio language?

A. Not only can you choose the language that displays on the screen buttons and descriptions, but you can also change the secondary digital audio that is available with certain networks and programs. Choose Audio Setup from the Setup Menu and change the default setting. Choose from English, Spanish, Portuguese or French. This feature is only supported on certain digital channels that provide secondary audio. If the chosen audio language is not available, the default audio language will be heard.

8. Q. What if I forget my Parental Controls/Purchase PINs?

A. You must call your local cable company to have these PINs reset. All of the PINs will be cleared. Once reset, you will need to enter new PINs.

9. Q. Why can’t I purchase this Pay-Per-View (PPV) program?

A. There are several reasons that could keep you from ordering PPV events:

• your phone line might not be plugged in

• you may have inadvertently made too many PPV orders, and may have to cancel one

before making another order

• you may have reached your credit limit. Call your cable company and have them check

your account

• your cable company may require you to call them to purchase a PPV event, instead of

an automatic purchase through the set-top box

10. Q. What if I missed a Pay-Per-View(PPV)movie/event that I ordered?

A. If your cable company provides impulse-ordering, you will not be billed for PPV on

channels that aren’t tuned. In cities that require phone ordering, you need to call your

cable company to cancel PPV orders. Check with your cable company to confirm

canceling procedures.

On Demand (Optional Feature)

11. Q. Do my Parental Controls & Purchase PIN settings stay the same for

On Demand purchases as with regular programs?

A. Yes.PINs and settings apply to On Demand ratings and purchases.

12. Q. What if I only watched 15 minutes of my On Demand program and didn’t get to

watch the rest before it expired?

A. You will have to order it again. Refer to the On Demand section in this manual for

more information on remaining rental and viewing times.

13. Q. If I get to the end of an On Demand program and want to watch it again, can I

restart at the beginning?

A. Yes, as long as your viewing period has not expired, you may watch it as often as

you like.

14. Q. How do I return to watching an On Demand program after I’ve tuned to

another channel?

A. Select My Rentals from the On Demand Menu and choose the program you want to

continue watching. You can either begin watching where you left off by selecting

Resume, or start over with the Restart.

15. Q. Some of the programs appear in the listings with a checkmark or a dollar sign

next to the title. What does this mean?

A. Depending on the services your cable provider offers, you may see a checkmark or a

dollar sign to indicate a program you have ordered.



41

4/6/10 12:28:58 PM


16. Q. How many On Demand programs can I order at one time?

A. Typically, there is no limit on purchases. Check with your cable operator for system

specific ordering information.

17. Q. I tried to order an On Demand program and received an error screen that said,

“Unable to Process Request”. What does this mean?

A. The “Unable to Process Request “message occurs when the set-top box is unable

to communicate with the On Demand equipment at your cable company. Try turning

your set-top box off and then on again. If the message appears again, note the time it

appeared and the action you took and call your cable operator.

18. Q. When I selected a category from the On Demand Menu, I received message that

said, “No Program Listings Available”. Why does this happen?

A. If there are no programs available for this particular category, this message will

appear: DVR Overview.

DVR Overview

19. Q. I currently record programs on my VCR or DVD recorder. How is a DVR different?

A. Your DVR Cable Box takes recording technology to a new level, capturing picture

and sound digitally (for a superior result to tape-based recording) and allowing greater

viewing flexibility. You can also press Instant Replay to review the last 15 seconds or

rewind to see a scene again. Yet you won’t miss moment of the program, because the

DVR keeps recording the current broadcast while you pause, rewind or replay scenes.

20. Q. How do I return to live TV when I’m watching recorded programming?

A. Simply press the LIVE or button on your remote.

21. Q. How do I record a Pay-Per-View (PPV) broadcast?

A. Pay-Per-View broadcasts must be ordered before they can be recorded.

If you want to schedule a recording for a PPV event, take the following steps:

a) From the Information screen, select the Record Icon (this will display the Order

Program First overlay)

b) Select the Buy Icon

c) Select the Record This Program Icon

d) Select the Confirm Icon

This procedure orders the program and schedules the recording. If you change your mind you must cancel both the recording and order.

Note: You can also set up the recording from the listings by selecting the PPV event and pressing the record button on the remote and following steps b through d.

22. Q. How does the Parental Controls feature work?

A. Parental Controls allow you to block programs from being viewed. Locks are based

on a program’s title, rating, TV content rating and channel. See the Parental Controls

section in this manual.

23. Q. How can I find programs I want to record?

A. Using i-Guide, you can search many ways: through the Main Menu, Quick Menu,

Search Menu, by programming category, through the By Time or Channel Listings grid

or through the Search Menu to alphabetically search by Title. When you find something

that sounds interesting, simply press Record. The DVR will automatically record that

program for you.

42


24. Q. What kind of programs can I record?

A. You can record both standard and High Definition programs which are automatically

interpreted by the DVR. Recording HD programs will take more storage space on your

DVR. However, you must have HD equipment.

25. Q. I have a home theater system. Can I record a program in Dolby Digital

my DVR?

TM

5.1 on

A. As long as the program is being broadcast in Dolby Digital audio, the DVR will record

the digital audio. A Dolby Digital indicator will appear on the Flip Bar and Program

Information screen for programs that provide it.

26. Q.What is the picture quality of recorded programs?

A. The DVR records programs in the same quality in which they are broadcast. For

example, programs broadcast in HDTV format are recorded in HDTV quality (if your

DVR is connected to a HDTV). Broadcast quality may vary.

27. Q. Can I record Digital Music channels?

A. Yes. You can record and playback Digital Music. However, the playback controls

(Pause, FF and REW) are not functional for recorded digital music.

28. Q. Can I record On Demand (OND) programs?

A. On Demand cannot be recorded with the DVR.

29. Q. How much High Definition programming can I save versus standard definition

programming?

A. You can record up to 90 hours of standard digital TV or up to 20 hours of HDTV

(depending on the transmission bit rate).Recording times may vary.

30. Q. Can I increase the rewind and fast forward speed?

A. Yes. Your DVR will control rewind and fast forward at four speeds each. Just press

the REW or FF buttons up to four times. The on-screen indicator will tell you at what

speed you are controlling playback.

31. Q. Can I set the DVR to skip commercials as it is recording?

A. No. You can only fast forward through commercials if you’re watching a recorded

program.

32. Q. Do Parental Controls work with DVR?

A. Yes. Parental Controls restrict viewing of recorded programs. If you schedule a

recording for a program you have Locked, the program will be recorded; however,

audio is muted and no video will appear while the program is recording. A restricted

notice remains on screen allowing you to enter your PIN to view the program during the

recording. Once the program has been recorded, you can saccess it from My Recordings.

Just enter your PIN to view.

Note: You can also set Parental Controls on recorded programs. Use the LOCK

button on your remote or Lock Icon from My Recordings or from Recorded Program

Information screen.

33. Q. How many hours of programming can I store on my DVR? What is the hard

drive capacity?

A. The recording capacity depends on the video format that is being recorded. Your

Dual Tuner DVR can record up to 90 hours of standard definition programming or up to

20 hours of high-definition programming. The hard drive capacity on many DVRs is120GB.

See “Manage Your Personal Video Library” section in this manual for more information.



43

4/6/10 12:28:59 PM


34. Q. Do I have to connect my DVR to a telephone or other data source?

A. The DVR gets all the information it needs from your cable signal, so that’s the only

connection required. In some cable systems, a phone connection may be necessary.

Check with your local cable company to confirm.

35. Q. Can I adjust the quality of the video recording to conserve hard disk space?

A. No. The DVR records at a pre-set level to ensure consistent results.

36. Q. Can my cable operator or another company track what I record with my DVR?

A. No. What you choose to record with the DVR is confidential.

Controlling Live TV

37. Q .How long can I pause live TV?

A. You can pause up to 90 minutes of standard programming; less with HD programming.

38. Q. How far back can I rewind live TV?

A. You can rewind up to two hours of standard TV programming as long as you were

tuned to the same channel.

39. Q. How do I use Instant Replay?

A. If your remote control is equipped with a REPLAY button, press it to instantly replay

the last 15 seconds of the program. If there is no REPLAY button, use the PAGE button

on your remote.

40. Q. If I’m watching a program in progress and want to record it, can I record from

the beginning?

A. If you just tuned to the program, the DVR begins recording from the point where

you pressed record on your remote. If you have been watching the program from the

beginning and have not changed channels (without using SWAP), the DVR will save all

the temporary recording (buffer) to the Hard Drive and you will capture the entire program.

41. Q. How can I catch up to the live broadcast of a program after I’ve paused it?

A. Press the LIVE button (if available) or the down arrow on the remote. Or, you can fast

forward to the point of live TV. The on-screen indicator will display “LIVE”. Managing

Your Recordings

Managing Your Recordings

42. Q. How long can I keep My Recordings?

A. You can keep themes long as you want. Just remember, the recording space is

limited, so you may need to delete some recorded programs from time to time in order

to make room for new ones.

43. Q. How will I know when I’m almost out of recording space?

A. An on-screen notice will appear advising you when recording space is low (80% full) or full.

Note: If you are recording a program and run out of recording space, the recording will

stop. You can always see how much recording space is available from My Recordings.

You can also manually delete recordings or set your DVR to automatically delete

recorded programs when space is needed. See: “Manage Your Personal Video Library”

section in this manual.

44


44. Q. Does the DVR automatically delete programs when the record space is full?

A. Only if you set it up that way. The DVR will automatically delete programs if you tell

it to do so by setting the programs to be deleted when space is needed. When the

record space is full, the oldest recordings that you have set to be deleted will be

deleted first. If you do not want the DVR to automatically delete certain recordings,

you can set them so that they are only deleted by you.

45. Q. How many recordings can I schedule for the future?

A. There is no limit to the number of recordings you can schedule as long as you do

not schedule more than two programs to record at the same time and you have

available recording space.

46. Q. What if the program I want to record runs over its scheduled air time, such as

when a football game goes into overtime? How can I make sure I record everything?

A. For live programs, you will be provided with the opportunity to extend the recording.

Follow the on-screen prompts to extend the program end time for your recording.

47. Q. Can I watch a show I am recording before the recording is completed?

A. Yes. You can either watch it live as it’s being recorded or you can rewind the program

you are currently recording and watch it from the beginning while the recording continues.

48. Q. Can I make a VHS tape or DVD of a recorded program?

A. You can copy a recorded program to a VHS or DVD tape by playing a recording from

the DVR in real time while simultaneously recording on your VCR or DVD.

49. Q. Can I set up my DVR to record every episode of a specific program title?

A. Yes! Your DVR lets you record multiple episodes of a program according to your

preference by setting up a Series Recording. Select the episode type to record, such

as first-run only or all episodes. Specify how many recordings to save and how long

to save the recording - until you erase it or until space is needed. To access advanced

series setup features like add minutes to the start and end times and specify which

channels to record, select the Recording Options Icon to review all options.

Tip: Use Title Search to find all air times for a particular title. You can then set up

individual recordings for any or all episodes, no matter what time they’re on.

50. Q. Can I “bookmark”a program I have recorded?

A. Yes. When you stop playback of a recorded program, it will stop where you left it.

To continue watching the program, select Resume or Restart from the Action Icons.

51. Q. On occasion, a recording starts a minute or two after the program has begun. Why?

A. The DVR timer is synchronized with the program guide time. If a broadcaster starts

the program minute earlier than the first minute. You can program your DVR to start

early or end late by adjusting you’re Recording Options.

52. Q. Only part of my program recorded. Why?

A. If the beginning of the program did not record, you might have tuned to the program

after it started and then set it to record. If the end of the program did not record,

the DVR may have reached its storage capacity before it was able to record the entire

program.



45

4/6/10 12:28:59 PM


DVR – Dual Tuner Recording Features

53. Q. How many tuners does my DVR have?

A. Most DVRs have two tuners. This feature allows you to record two channels at the

same time, record one channel while watching another or record two programs and

watch a 3rd program from your DVR recordings library.

Note: some DVRs are equipped with only a single tuner. See the Single Tuner FAQ

section for more information.

54. Q. What is DVR Clipping?

A. If there is a recording overlap when both tuners are in use, i-Guide will clip the

beginning of the program. See the DVR section in this manual for a review of DVR

Clipping.

55. Q. Can I record or watch two programs at the same time?

A. Yes, you can use the SWAP button on your remote to change from one tuner to the other.

56. Q. Can the DVR play back a High Definition recording while another HD program

is being recorded?

A. Yes. In fact, you can record two programs at once while watching a previously

recorded program from the hard drive for both HD and regular programming.

57. Q. Are there separate buttons for each tuner? How do you make the Dual Tuner

DVR record two programs at once?

A. i-Guide can record two different programs listed with overlapping times by pressing

the Record button, by manually scheduling the recordings, or by setting future

recordings from Program Information screen.

DVR – Single Tuner Recording Features

Refer to this section regarding recording

58. Q. Can I watch another program while I’m recording?

A. You can watch a previously recorded program while you are recording a live program

by accessing the DVR menu. However, if you change channels you will see a screen

asking you to confirm you want to change the channel and stop the recording.

59. Q. Can I schedule a recording for two shows airing at the same time?

A. Currently, your DVR can only record one program at a time. If you try to schedule

a recording at the same time you have scheduled another, you will see a Scheduling

Conflict message that gives you the opportunity to change your Recording Options.

Troubleshooting

60. Q. Why doesn’t the set-top box respond when I press the keys on my remote?

A. If power is on, make sure your remote is in the Cable mode. Press the CABLE

button on the remote.

61. Q. If the power goes out, do I need to reset my Parental Controls and Purchase

PINs, Favorites and Reminders?

A. No. These features will not be lost if the terminal loses its power. However, the guide

information will need to reload into the box.

46


62. Q. Nothing happens when the MENU button is pushed, but I can change the

channel up and down.

A. If the terminal was just installed, it takes approximately 5-15 minutes for i-Guide

to be downloaded to the set-top. If after 5-15 minutes nothing happens, unplug the

terminal, plug it back in and wait another 5-15 minutes. If the guide still does not

appear, contact your cable company.

63. Q. I can’t see the edges of the i-Guide screens.

A. Select the Adjust Screen Position option from the Setup screen. Press the buttons

until the arrows on the screen are centered. If image is centered and still cut off, check

your TV’s user manual.

64. Q. The guide has locked up. Neither the buttons on the remote, nor the buttons on

the terminal itself work.

A. Try unplugging the terminal and then plugging it back in. This will reset the terminal

and allow for data to be downloaded. It will take some time for the information to appear.

If there is still a problem after the information has appeared, call your cable company.

65. Q. I have no video, a snowy picture or I cannot tune to any of the digital channels.

A. Make sure that all of the cable connections are secure and that the TV is tuned to the

correct channel (3 or 4). Also, make sure you are actually controlling the cable terminal

(press the CABLE button on the remote).

66. Q. Why won’t my remote control respond when I press a button?

A. Go through this quick checklist to determine the problem:

1 Press the CABLE button on the remote to make sure it is in Cable mode. Try using

the remote again.

2. If the remote is still not functioning correctly, press the CHANGE button on the front

of the terminal. If the channel changes, there is a problem with the remote control.

The batteries or the remote control itself may need to be replaced.

3. Unplug the terminal and plug it back in.

4. Call your cable company.

67. Q. There are no listings in the guide, or the words “To Be Announced” appear in

the listings screens.

A. This can happen if there has been a power failure or if the terminal was unplugged.

Make sure everything is plugged in and running. Wait 5-15 minutes for the channels

and program data to load.

68. Q. I have a message on my screen that says “This feature is currently being

restored”. What does this mean?

A. This screen appears if you try to access a feature that is not available because the

terminal has not received all the necessary data. This most commonly happens

following a power loss.

69. Q. I have a message on the screen that says “This channel should be available

shortly”. What does this mean?

A. This screen will appear when you tune to a channel that is currently not available. If the

channel is not available after 15-30 minutes, call your cable company.

70. Q. What do I do if I am stuck in a screen or menu I do not understand and want to

get out?

A. You can always press the EXIT button on the remote to immediately return to

watching TV. You can also press the LAST button to back up one screen at a time.



47

4/6/10 12:29:00 PM

71. Q. The displayed information is incorrect.

A. Although i-Guide checks all data thoroughly before it is sent to your home,

programmers do sometimes change their schedules at the last minute without

notification. Please report erroneous data to your cable company.

72. Q. What happens to my DVR recordings if my digital cable box temporarily

loses power?

A. All recordings that were saved prior to the power loss are preserved, as well as future

recording schedules. You miss only the recordings in progress while the power was out.

Note: If you experience continued problems with your cable box, remote control or

interactive program guide, please contact your local cable company.


48




A28

4/6/10 12:29:00 PM

Manual

table of contents

basic navigation tips

your access to digital cable

search

smart channel surfing

parental controls

favorites

setup

digital pay-per-view

on demand

hdtv

digital video recorder (dvr)

Pause live television! Rewind and replay programs so you don’t miss a beat

Control Live TV

Recording Programs

Search and Record

Recording Series

View Recorded Programs

Future Recordings

Manage Your Recordings

Modify Recording Options

Recording Notices

frequently asked questions

Interactive Program Guide

On Demand (Optional Feature)

DVR Overview

Controlling Live TV

Managing Your Recordings

DVR – Dual Tuner Recording Features

DVR – Single Tuner Recording Features

Troubleshooting

Related manuals

Mid-rivers

DCH6416

Motorola

DCX700M

Motorola

DCX3400 Series

Motorola

DCX700M