table of contents
TABLE OF CONTENTS
Wire Termination
Twist-on Wire Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2
WeatherProof™ & UnderGround™ Wire Connectors. . . . . . . . . . . . . . . . . . A-5
PowerPlug® Luminaire Disconnects. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-8
SpliceLine™ In-Line Wire Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-9
In-Sure™ Push-In Wire Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-10
Grounding Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-11
Crimp Terminals & Splices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-12
Terminal Strips. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-17
BUCHANAN Wire Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-22
BUCHANAN Streetlight Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-25
BUCHANAN Tap Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-28
BUCHANAN Terminal Blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-29
Tools & Supplies
Fish Tapes & Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-2
Fishing Poles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-7
Wire Pulling Lubricant & Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-8
Conduit Benders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-12
Pulling Supplies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-14
Wire Strippers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-16
Pliers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-22
Screwdrivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-30
Cable Cutters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-38
Miscellaneous Hand Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-40
Hand Tool Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-42
Tool Carriers & Bags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-44
Insulated Hand Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-48
Cutting & Holemaking Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-52
Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-64
Cable Staples. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-72
Heat Shrink. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-74
Heat Guns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-78
Wire Markers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-79
Switches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-81
Commutator Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-93
Lockout/Tagout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-95
Safety Signs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-106
Safety Tapes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-107
Stripmaster® Wire Strippers
Stripmaster® Wire Strippers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-2
Custom Stripmaster® Wire Strippers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-4
Test & Measurement
Clamp Meters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-2
Multimeters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-5
Circuit Tracers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-9
Thermal Imagers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-10
Circuit Analyzers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-12
Power Quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-14
Insulation Testers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-15
Voltage Testers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-16
Electrical Testers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-18
Specialty Testers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-19
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-20
DataComm/Networks
Testers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-2
Compression Tools & Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-9
Crimp Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-13
Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-15
Strippers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-18
Kits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-22
Fiber Optics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .E-26
LanTEK® II Series Cable Certifier
LanTEK® II offers the best speed, performance and price available today. Nine second Cat 5E
and 14 second Cat 6 tests with full performance data plus 10 Gigabit Alien Crosstalk testing, more
than 4x faster than other systems making LanTEK® II the ultimate copper certification platform.
The patented universal adapter system lets you certify most cabling with off-the-shelf patch cords
saving time and money by eliminating the need for proprietary permanent link adapters.
The optional FiberTEK® FDX modules provide the world’s only dual wavelength, bidirectional fiber certification available. That’s more than 3x faster than existing testers.
Three models provide the needed performance without the added expense; choose
from 350 MHz/Cat 6, 500 MHz/Cat 6A or 1000 MHz/Cat7A all with accuracy
independently verified by ETL.
LanTEK® II also offers ultimate versatility with options for certification of TERA, GG45
and EC7 category 7/7A systems, plus M12 industrial Ethernet and coaxial test adapters.
n Best price/performance options - models ranging from 350 MHz to 1000 MHz
n Most internal memory available - store over 1700 Category 6/ISO E tests with graphs
n Extraordinary fast fiber testing with FiberTEK® FDX - the first dual wavelength, bidirectional fiber certification tool
n Large, ultra-bright display - 4.3 in. wide screen display with white LED backlighting provides easy viewing of high-frequency data plots
n 350 MHz & 500 MHz models are fully upgradable to 1000 MHz
n Smart lithium-ion battery technology - 18 hour battery life with self calibrating “fuel gauge” for accurate capacity readings
More Ways to Save
Save time and money in more ways than ever with LanTEK® II.
Universal Link Testing
The patented testing process eliminates the need for costly
permanent link adapters. Using universal test adapters for Category
5E through 6A certification, patch cords are typically the only item
that needs to be replaced when worn or damaged. This eliminates
the wait and expense of proprietary adapters meaning more time
spent testing and less time searching for replacement parts.
Channel and Permanent Link Testing with One Adapter
LanTEK® II allows permanent link and channel certification
without changing adapters. The patented DualMODE™ function
allows cabling to be certified to two different standards with one
press of the Autotest button; half the time of any other certifier.
Testers
Certify cabling to both Category 6 permanent link and Category 6
channel link standards at the same time, satisfying requirements
from cabling manufacturers and end users without costing more
time in the field. Or certify cabling to existing current standards and
proposed future standards which eliminates retesting at a later date.
Most Memory Capacity
LanTEK® II has 7x the storage capacity as competitive certifiers. Save
an astonishing 1700 Category 6 results with graphs. If the memory
fills, simply off-load the data to a USB flash drive for portability and
archiving.
Cut the Power Cord
The smart lithium battery technology provides 18 hours of use in
the field. The revolutionary battery technology has two charging
modes that offer the best flexibility available. Slow charge the battery
overnight while it is inside the LanTEK® II, or remove the battery and
plug in to its dedicated charging port for a quick five hour charge.
Plus, the battery’s internal fuel gauge automatically self-adjusts every
time the pack is completely discharged and recharged, providing
accurate charge readings over the life of the battery pack.
FIBERTEK® FDX
n The only solution that completely eliminates
the need to swap fibers or modules, allowing
complete one-step certification of horizontal
and backbone cabling.
n More than 2x as fast as any other
fiber certification tester
n Complies to TIA/ISO/IEC certification standards
n Real-time power meter to aid in troubleshooting
active equipment
E-2
www.idealindustries.com
Five results with one Autotest, the
fastest fiber certification solution
available
1-800-435-0705 for Customer Service
DataComm/Networks
LanTEK® Series Cable Certifier Specifications
LanTEK® II
Handset Dimensions
Height/Width/Depth: 10 in. x 5 in. x 2.1 in. (25.4cm/12.7cm/5.3cm)
Handset weight w/battery
Display: 2.4lbs/1.1kg; Remote: 2.3lbs/1.0kg
Battery
Lithium ion, 7.4VDC, 6.6AH; Input: 12V/2A DC; Typical operating time: 18 hours (new battery running a Cat6 test every 2.5 minutes, full backlight); Charge time:
4 hours quick charge with battery removed from handset, 6 hours inside handset.
Input power
Handset: DC 12-15V, 2A; Line/mains power: AC 110-240V, 50/60Hz
Display
4.3” wide screen TFT, 480 x 272 pixel, 95 x 54mm viewable area
Connectivity
Adapter port: 168 pin ultra low crosstalk, mini-USB device port, USB host port (display handset only), four pin serial port (service use only), 1/8” talkset jack, power/
charging jack
Frequency range
LanTEK II-350: 1-350MHz, LanTEK II-500: 1-500MHz, LanTEK II-1000: 1-1000MHz
Memory
Non-volatile flash, storage capacity for 1700 TIA-Cat 6 tests with graphs. Tests can be copied to USB flash drive, up to 64GB.
Measurements
Wire map, DC loop resistance length, capacitance, NEXT, insertion loss (formerly attenuation), ACR-N (formerly ACR), return loss, average impedance, propagation delay,
delay skew, power sum NEXT, power sum ACR-N (formerly power sum ACR), ACR-F (formerly ELFEXT), power sum ACR-F (formerly power sum ELFEXT), alien crosstalk
(with optional AXT testing kit)
Length measurement
0-2000 ft.; 1 ft. resolution, +/-(3% + 3 ft.), distance to short/open reported
Supported cable types
TIA/EIA Category 3, 4, 5, 5E, 6 and 6A: 100Ω; ISO/IEC Class C, D, E, EA, F, FA: 100Ω
Cat 6/6A Class E/EA RJ-45 permanent link adapters: shielded and un-shielded cable, universal adapters provide channel, permanent link and basic link measurements.
Supported connectors
Additional adapters: GG45, ARJ45, TERA, EC7 (MMCPRO3000), Coax 50-75Ω (BNC connector), M12 industrial
Tone generator
Integrated into display and remote handset, compatible with standard analog inductive probes, selectable tone (high/low/warble) 500/600 Hz, selectable pin output.
Environmental
0°C to 50°C non-condensing Operating Temperature , -20°C to 70°C, non-condensing Storage Temperature, Vibration - MIL-PRF-28800 F, Class 3
Accuracy
Baseline: Certified by ETL to meet IEC 61935 Level III/IIIe/IV; Channel/Permanent link: TIA 568-B.2-2 and IEC 61935 Level III/IIIe/IV
Warranty)
One (1) Year from date of purchase; Batteries and accessories are warranted 90 days from date of purchase ((LanTEK II and FiberTEK FDX)
PC Software
Requirements: Microsoft Windows® XP or Vista, (32/64 bit) 512MB RAM, 500MB hard disk + 1GB for every 1,500 Category 6 tests
FiberTEK FDX
Compatability
LanTEK® II (any model)
Connector
User changeable adapter (SC, FC, ST), 2.5mm ferrule
Laser safety
Multi-mode 850 VCSEL: class 3, 5mW max; multi-mode 1300 laser: class 3, 5mW max; Single mode 1310 & 1550: class: 3, 5mW max
Power meter accuracy
± .25dB from 0dBm to -40dBm 850-1550nm; system dynamic range 40dB
Length accuracy
±3%; maximum distance measurement 3000m
Display resolution
Power/attenuation: 0.1dB, length: 0.1m/0.1ft
Contents: Two FiberTEK FDX modules, lockable semi-rigid carrying case, SC, FC, ST adapters for modules (2 ea.), SC-SC patch cords (MM kits: 3x 62.5µm, 3x 50µm; SM kits: 3x 9um SMF)
compliant to ISO/IEC 14763-3 standard, quick reference guide, and electronic operation manual.
Description
Cat. No.
33-990-FA01
LanTEK® II – Add-on Options
33-993
LanTEK II-1000: TIA/EIA Cat7A, ISO Class F/FA certifier w/Cat6A adapters
33-992
LanTEK II-500: TIA/EIA Cat6A, ISO Class E certifier w/Cat6A adapters
33-990-FA02
Multimode (850/1300nm) kit with VCSEL/laser light sources for laser optimized fiber
33-991
LanTEK® II-350: TIA/EIA Cat6, ISO Class E certifier w/Cat6 adapters
33-990-FA03
Single mode (1310/1550nm) kit with laser light sources for single mode fiber
33-993-FA01 LanTEK® II-1000 with MM LED FiberTEK FDX Kit
33-990-FA04
Combination MM/SM kit with LED MM sources and laser SM sources
(33-990-FA01 & 33-990-FA03)
33-993-FA02 LanTEK® II-1000 with MM VSCEL/Laser FiberTEK FDX Kit
33-990-FA05
Combination MM/SM kit with VCSEL/laser MM sources and laser SM sources
(33-990-FA02 & 33-990-FA03)
®
®
A
Multimode (850/1300nm) kit with LED light sources for standard multi-mode fiber
33-993-FA03 LanTEK® II-1000 with SM Laser FiberTEK FDX Kit
FDX2-CP-3
Three year Care Plan for FiberTEK FDX, 3 year warranty + annual calibration for FA04
or FA05 kits
33-993-FA04 LanTEK® II-1000 with MM LED & SM Laser FiberTEK FDX Kit
FDX-CP-3
Three year Care Plan for FiberTEK FDX, 3 year warranty + annual calibration for
FA01-FA03 kits
33-993-FA05 LanTEK® II-1000 with MM VSCEL & SM Laser FiberTEK FDX Kit
LT2-CP-3
Three year Care Plan for LanTEK® II, 3 year warranty + annual calibration and accessory replacement
LANTEK10GBKIT
Testers
Cat. No.
Alien Crosstalk Testing Kit for 10GbE Certificatioin. Compatible with 33-992
and 33-993.
Contents: LanTEK® II display and remote handset, two smart lithium ion batteries, two 110-240V power adapters with US/EU/UK plugs, lockable semi-rigid carrying case, Cat6A F/FTP patch cords,
USB cable, DataCENTER data management and reporting software, two headsets, hanging straps and ETL accuracy certificate.
RoHS
1-800-435-0705 for Customer Service
N12966
www.idealindustries.com
E-3
10 Gigabit Alien Crosstalk Testing Kit
Perform a standard 6-around-1 cable test with PS ANEXT and PS AACR-F results for both ends of
the cable in as little as 5-1/2 minutes compared to over 20 minutes for some competitive models.
n Add Alien Crosstalk testing capability to any LANTEK® 6A or 7G and LanTEK® II
n Perform PS Alien NEXT and Attenuation to Alien Crosstalk Ratio measurements
n Unique Dual-port AXT adapter allows PSANEXT testing with just one handset for quick
initial site testing
n Dual-handset mode allows complete AXT certification 4 times faster than other AXT
test systems
n No PC required in the field - all test results calculated on-the-fly for instant
pass/fail indication
n Kit includes 2 Dual-port AXT adapters, 12 AXT terminators,
shielded patch cords, manual, firmware update and PC
reporting software
Description
Cat. No.
Alien Crosstalk Testing Kit for LANTEK
®
LANTEK10GBKIT
SIGNALTEK™ Gigabit Ethernet Certifier & SIGNALTEK™-FO
Multimedia Ethernet Certifier
SIGNALTEK™ provides a technically innovative method to test and document performance
of voice, data, video and VoIP applications for cabling installers and network technicians. It
tests the link’s ability to support applications by transmitting Ethernet packets on the wire
and measuring the link performance according to IEEE 802.3ab Gigabit Ethernet standard. By
monitoring transmitted and received data packets, it can report the BERT (Bit Error Rate Test)
for the link.
SIGNALTEK™-FO is the first active ethernet certifier that offers both copper and fiber optic testing;
and SIGNALTEK™-FO does it for less than the price of an Optical Test Set alone.
n Simulate real world network traffic with full-duplex gigabit performance testing
n User selectable 10/100/1000 Bit Error Rate Testing (BERT) to ensure performance for all
Ethernet devices. Decibel (dB) loss measurements of optical lines.
Testers
n Smart autotest function detects line condition and automatically chooses
appropriate test to run to allow testing cable that is terminated with a
SIGNALTEK remote, a network device or unterminated
Description
Cat. No.
SIGNALTEK™-FO w/850 Modules
33-981
n Save time using the remote to perform 10/100 or gigabit service detection
AND initiate an Autotest when main unit is connected
SINGALTEK™-FO w/13X0 Modules
33-982
n Maximum flexibility with two USB ports. Connect to a computer to upload
test results, connect directly to a printer, or connect a USB memory drive for
unlimited storage
SIGNALTEK™-FO w/850 & 13X0 Modules
33-983
SIGNALTEK™-FO w/o Modules (Fiber-Ready)
33-987
SIGNALTEK™ Kit - Copper Only
33-974
n Get maximum coverage with a full two-year warranty
Universal 120-240V Power Adapter
n Configure multiple target IP addresses for pinging several network devices
to ensure communications with servers, printers, IP cameras, home
automation controls, etc.
RJ-45 to 8 Head Alligator Clip
K-7920
Pair of 850nm SFP Modules
SFP-850
n Offers network interrogation tools such as link establishment, port LED blink
and ping
Pair of 13X0nm SFP Modules
SFP-13X0
n TDR to accurately measure length and locate shorts and opens
Replacement Cable Accessory Kit - contains
all original cables in SIGNALTEK™ Kit
4010-00-0136
1219-91-0003
n ARP test discovers active network devices
n Exceeds 100m measurement distance required
by IEE 802.3ab gigabit Ethernet
n Dual Wavelength Capability – available in both
850nm and 1300mn wavelengths to support
virtually all LAN and campus fiber applications.
#33-974 - SIGNALTEK™ Kit - Copper Only
E-4
www.idealindustries.com
#33-983 – SIGNALTEK™-FO w/850 & 13X0
Modules
1-800-435-0705 for Customer Service
DataComm/Networks
LanXPLORER PRO
NEW
WIFI
With full In-Line and Endpoint test
capabilities, LanXPLORER PRO
tests not only copper cables but
also active LAN connections over
copper and fiber links. In addition, it
liberates the user from cables by
allowing most tests to be conducted through
a wireless connection offering unparalleled
flexibility. With such comprehensive test capability
SFP Fiber
and ease of use, LanXPLORER PRO is the perfect
slot
tool to meet the needs of professional IT installers
and systems administrators in any enterprise, campus
or industrial Ethernet environment.
n Network connectivity and diagnositcs for
10/100/1000Mb Ethernet
n Options for dual copper ports for in-line testing,
fiber optic SFP port and Wi-Fi
USB interface & internal
memory
QVGA 3-1/2” color
touch screen
RJ-45 Connection
Exchangeable
RJ-45 interface
In-line test
Multifunction
softkeys
Autotest
n Network mapping to all devices on the network
and group into categories
Cursor keys
Mains charger
input
n Save and recall Network Maps to identify changes
in the network such a new or missing devices
n List top talkers to identify the source of network
slowness
n Power over Ethernet (PoE) testing with load simulation to
fully test PoE power supply equipment and in-line testing to measure power consumption of PoE devices
n Full wire map testing with TDR to located cabling faults
n Displays total, average, peak network bandwidth, error generation and packet size distribution
Rubber molded
housings
n Monitoring of VoIP calls and quality including RTP Jitter
Features
LanXPLORER
LanXPLORER
Plus
LanXPLORER
Pro
Color, 3.5” QVGA
Color, 3.5” QVGA
Color, 3.5” QVGA
Touchscreen
1 x RJ45
1 x RJ45, Wi-Fi
2 x RJ45, Wi-Fi, 1
x SFP
Wiremap with length
4
4
4
PoE and PoE+ tests
4
4
4
4
4
Display
Test interfaces
Wi-Fi
SFP fiber interface
4
Network detection
4
4
4
Network device mapping
4
4
4
Traffic/Top Ten/Error
counting
4
4
4
Description
Cat. No.
LanXPLORER Tester
Soft carrying case, 2 x RJ-45 STP patch cords, 1 smart
remote, 6 AAA batteries, printed quick reference guide,
manual on CD
33-940B
LanXPLORER PLUS Premium Kit
Includes tester, soft carrying case, 2 x RJ-45 STP patch
cords, 1 smart remote, printed quick reference guide,
manual on CD, rechargeable battery pack, AC power
supply, inductive cable tracing probe
33-941P
LanXPLORER PRO Premium Kit
Includes tester, soft carrying case, 2 x RJ-45 STP patch
cords, 1 smart remote, printed quick reference guide,
manual on CD, rechargeable battery pack, AC power
supply, inductive cable tracing probe
33-942P
Battery Pack - rechargeable
33-940-BP
PC diagnosis
4
Remote #1
33-940-R1
In-line tests
4
VoIP testing
Remote Kit #2 - #12
33-940-R12
4
Test storage
4
4
4
RJ-45 Inserts with removal tool
33-940RJ45
VLAN / 802.1x support
4
4
4
Power Supply/Battery Charger
33-940-PS
Loopback mode
1-800-435-0705 for Customer Service
Testers
Ordering Information
4
www.idealindustries.com
E-5
SecuriTEST™ PRO CCTV/Security Tester
SecuriTEST™ PRO is the most versatile all-in-one installation and troubleshooting tool for the CCTV professional. CCTV installers often need to
carry a variety of testing tools to complete their work. SecuriTEST™ PRO combines the most-needed tools in one easy-to-carry package. Since
all connections (video/communications/DMM) attach to a single unit, SecuriTEST™ PRO eliminates the need to juggle several devices while on
a ladder or lift, making working conditions safer and increasing productivity.
Features of SecuriTEST™ PRO
n IRE video level and sync tests
n Sound level test through integrated speaker and on screen level indicator
n High capacity lithium ion battery
n Support for additional PTZ protocols
n Carrying case included
n Seven Essential CCTV Tools - Combines a CCTV video tester, PTZ camera controller, Digital Multimeter, UTP cable tester,
video test pattern generator, PTZ protocol analyzer and camera programmer in a single compact package.
n Save Time & Money - Test, aim, focus and program cameras when working alone. Save time by not having to walk back to the
control center to verify functionality of each camera.
n Compact Design - Combines all the most needed security tools in a lightweight easy-to-carry unit. Sharp, bright 2.5 in. (6.3 cm)
color LCD screen with on-screen displays for PTZ control/diagnostics and DMM readouts.
n PTZ Protocol Analyzer - Compatible with 20+ PTZ protocols
to test and program cameras in the field. Decodes and
identifies output from PTZ console to aid in
troubleshooting.
LED Indicators
UTP Test Port
Audio Input
PTZ Control
Pad
Testers
IRE On/Off
Test Lead Ports
E-6
www.idealindustries.com
Description
Cat. No.
SecuriTEST™ PRO CCTV/Security Tester only
33-892
1-800-435-0705 for Customer Service
DataComm/Networks
VDV Pro Cable Tester
The VDV PRO Cable Tester is an easy-to-use cable testing and verification device that can
quickly test all wiring requirements found throughout today’s residential and commercial
environments.
n Voice – tests 3-pair USOC and 6-position RJ-11/12 jacks for voice cable testing
n Data – tests wire map of shielded and unshielded cable to T568A/B standard
n Video – tests coax cable for opens, shorts and length with F-Connector interface
n Larger backlit LCD screen for better test results readability
n Network link LED blink for visual cable tracing
n Voice testing capability detects RJ-11 (1, 2, or 3 pair)
n Voice test also shows Normal or Reverse for pins 1 through 6
n Length measurement is shown during initial test results for convenience and time savings
n Eight remotes have RJ-45, RJ-11 and Coax F-jacks for increased testing capabilities
n Tests for shield continuity, shorts, opens, miswires, reversals and split pairs with remote connected
n Full dot-matrix LCD display for user convenience to read display results
n One-ended testing for shorts, opens and split pairs (no remote needed)
n Test results displayed in wire map format with message line for shorts and split pairs
Description
Cat. No.
Description
Cat. No.
VDV PRO w/one remote and terminator
33-770
VDV PRO Eight Remote Replacement Kit (ID 1-8)
33-774
VDV PRO w/eight remotes and terminators
33-771
Eight Coax Terminator Kit
33-775
VDV Pro (33-770) w/one remote and Amplifier Probe (62-164)
33-780
IENet™ Pro Cable Tester for RJ-45 and M-12 Industrial Ethernet
Cable Testing
The IENet™ PRO tester makes it a snap to quickly verify wiring integrity and assure proper terminations for
diverse types of industrial cabling and provides automatic pin conversion between M-12 and RJ-45
connections.
PROFINET® is a registered trademark of PROFIBUS International.
Testers
n Simple selection between Voice, 2 and 4 pair Data, and Coax testing functions. Voice and Video/Security
tests via optional adapters
n Tests for opens, shorts, miswires, reversals, split pair (user selectable) and length
n Indicates correct wiremap to T568A/B standards for shielded and unshielded cabling
n Easy-to-read LCD display with “PASS” or “Miswire” indicator for each test
n Identifies presence of voltages on cables
n Tone generator supports four different tones making fault isolation easier
n Network LED blink for visual cable tracing
n Numerical indication for UTP “No Shield” and STP - “Shield” to
comply with industrial ethernet PROFINET® requirements
Accessories
Description
Cat. No.
RJ-45 to RJ-11 jack adapter (2/card)
LA-4233
RJ-45 to F-Connector adapter (2/card)
LA-4234
F to BNC Adapter Kit
LA-4173
Ordering Information
Description
Cat. No.
IENet™ PRO w/single remote
33-772
IENet™ Pro w/eight remotes
33-773
Eight Coax Terminator Kit
33-775
IENet™ Pro Eight Remote Kit (ID 1-8)
33-776
1-800-435-0705 for Customer Service
www.idealindustries.com
E-7
Test-Tone-Trace Kit
VDV MultiMedia Cable Tester
n Kit includes the VDV (33-856) and
Easy-to-use tester for installers working
with voice, data and video applications.
One tester for all applications!
Amplifier Probe (62-164)
n Tests and traces coax, twisted pair
and telephone cables
n Voice — supports 3-pair USOC
Description
Cat. No.
Test-Tone-Trace Kit
33-866
n Data — supports both shielded and
unshielded cable testing to T568A/B
(RJ-45)
n Video — tests coax cable for opens
PRO Amplifier Probe and Tone
Generator
and 6-position RJ-11/12 jacks for
telephone cable testing
and shorts with F-connector interface
n Tests for opens, shorts, miswires,
reversals and split pairs. Also indicates
correct wiremap. Has automatic shut
off (to prolong battery life) and low
battery indicator.
n Easy-to-read LCD display with “PASS or ERROR” indicator after
each test
n Tone generator supports four different tones making fault
isolation easier
n One remote wiremap and testing unit is stored inside tester —
easier to keep all parts together
Amplifier Probe
n Identifies and traces wire or cables within a group
n Battery low indicator
n Uniquely designed remote accommodates RJ-11, RJ-45 and
Tone Generator
n Emits three different types of tones
F-style connectors
Description
Cat. No.
Kit with integrated remote and accessories
33-856
n Auto-off after three hours of non-use
n F-Connector port for toning & tracing coaxial CATV cabling
LinkMaster™ Tester
n Tone can be added in any status
Tests wiring configurations on
UTP/STP cables. Checks for
shorts, miswires, reversals and
split pairs. Debug feature,
automatic shut-off and low
battery LED indication.
systems
Testers
Description
Cat. No.
Amplifier Probe & Tone Generator Kit - includes 62-164,
62-160, Lead Set, Cable Assembly
33-864
Amplifier Probe
62-164
Tone Generator
62-160
TRACETone™ Tone Generator & Amplifier Probe
n Designed to test installed
twisted pair wiring
n Tests unshielded and shielded
modular plugs
n Main unit and remote allow one
person testing
n Test continuity and locate
signal of installed wire and cable
n Two selectable tone styles
n Tone Generator & Amplifier
Description
Cat. No.
LinkMaster™ Tester and Remote
62-200
Probe fit together for easy storage
n Adjustable volume control
n RJ-11 Alligator Clip, RJ-11 Cable Assembly included
E-8
Description
Cat. No.
TRACETone™ Tester
62-140
www.idealindustries.com
1-800-435-0705 for Customer Service
DataComm/Networks
OmniSeal™ Pro Compression Tools
The IDEAL OmniSeal™ Compression Tools now offer additional features and
OmniSeal™ Pro
increased connector compatibility in a smaller, more compact tool designed to meet
30-603
the demands of the professional installer. (OmniSeal™ requires no accessory
attachment to terminate IDEAL branded compression connectors.) Most other manufacturers
compression connectors can be terminated with an easy plunger depth adjustment. The simple
intuitive design combined with its size and universal connector acceptance makes this the only
compression tool needed by professional installers.
n Factory preset to work with IDEAL compression connectors
n Compresses F-type, RCA, BNC and Mini connectors
n Adjustable to fit other manufacturer’s connectors —
no accessory adapters required
Description
Cat. No.
OmniSeal™ Pro XL Compression Tool
30-793
OmniSeal™ Pro Compression Tool
30-603
OmniSeal™ Pro XL
30-793
BNC
RG-11
RCA
Mini Coax
OmniSeal™ Pro XL
30-793
OmniSeal™ Pro
30-603
with
adjustment
For BNC connectors
(Model 30-793)
Convenient handle lock
for easy fit in pouch
Textured Santoprene™
slip resistant
comfort grip
Compresses
F-type, Mini
F-type, RCA,
and Mini RCA
connectors
High strength aluminum
body for durability,
lighter weight
Universal tip for all
connectors
Compression Tools
Spring loaded
handle
F-Type
Spin knob
for fast depth
adjustment
Lock nut holds
adjustments in
place
F-Compression Tool
n Easily compresses series 6 and 59 coax compression F-connectors
n Permanent connection – never comes loose
n Works with most brands of compression connectors
Description
Cat. No.
Economy Compression Tool
30-633
Economy Compression Tool Kit - Includes four RG-6
Connectors
33-633
1-800-435-0705 for Customer Service
www.idealindustries.com
E-9
Compression Connectors
RTQ™ Reg/Tri/Quad & Plenum F-Connectors
•
•
•
•
•
Fits 60% regular, tri-shield and quad shield cables
Nickel-plated, brass-construction for superior corrosion resistance
Designed for use by satellite and cable TV companies
Weatherproof for indoor and outdoor use
Use 30-603, 30-793 or 30-633 Compression Tools
RG-11 F-Connectors
•
•
•
•
•
•
Fits 60% regular RG-11 cable
Nickel-plated, brass-construction for superior corrosion resistance
Designed for use by satellite and cable TV companies
Weatherproof for indoor and outdoor use
Use 30-603 or 30-793 Compression Tools
Use 45-111, 1/4” x 1/4” RG-11 Coax Stripper
BNC Connectors
•
•
•
•
•
•
Nickel-plated, brass-construction for superior corrosion resistance
Moisture-inhibiting design
Use 30-793 Compression Tool
75 Ohm nominal impedance
Gold-plated pin contact area
Available in plenum versions
Compression Connectors
OmniCONN™ F-Connectors
•
•
•
•
•
Non corrosive nickel plated brass body and polycarbonate bushing
Delrin/Nylon adapter sleeve and o-ring provide double protection for
a watertight seal
Free spinning hex nut for ease of installation onto all 7/16 ports
75 ohm nominal impedance
Two-piece pre-assembled connectors
RCA Connectors
•
•
•
•
E-10
www.idealindustries.com
Constructed of nickel plated brass and gold plated head
75 ohm nominal impedance
Bandwidth up to 3 GHZ
Compatible with 30-603 and 30-793 Compression Tools
1-800-435-0705 for Customer Service
DataComm/Networks
Connector Type
F
F
F
F
Cable Type
RG-6
Reg/Tri/Quad
RG-6
Plenum
RG-59
Reg/Tri/Quad
RG-11
F
RG-6
F
Quad
BNC
BNC
BNC
BNC
RCA*
RCA*
RCA
RG-6
RG-6 Plenum
RG-59
RG-59 Plenum
RG-6
RG-59
Mini (21 - 23 AWG)
Qty.
Cat. No.
Card of 4
92-654
Card of 10
92-651
Jar of 50
92-650
Jar of 100
92-656
Box of 1,000 (20 bags of 50 ea.)
92-759
Box of 1,000 bulk
92-659
Jar of 50
92-660
Box of 1,000
92-669
Jar of 50
92-610
Box of 1,000
92-619
Card of 10
89-211
Box of 500
89-1211
Jar of 50
89-044
Box of 1,500
89-1544
Jar of 50
89-045
Box of 1,500
89-1545
Card of 4
92-705
Card of 15
89-048
Jar of 35
89-5048
Box of 1,000 (10 bags, 100 ea.)
89-1048
Card of 15
89-050
Jar of 35
89-5050
Box of 1,000 (10 bags, 100 ea.)
89-1050
Card of 4
92-704
Card of 15
89-047
Jar of 35
89-5047
Box of 1,000 (10 bags, 100 ea.)
89-1047
Card of 15
89-049
Jar of 35
89-5049
Box of 1,000 (10 bags, 100 ea.)
89-1049
Card of 4
92-582
Card of 10
89-582
Jar of 35
89-580
Card of 4
92-572
Card of 10
89-572
Jar of 35
89-570
Card of 10
89-014SMRCA
Compression Connectors
Compression Connectors
*RCA Connectors include an assortment of color ID bands.
Compression Port Seals - 1/2 in.
n Used with compression F-connectors
to weatherproof connector by placing
onto the female port. Made from
EPDM for superior sealing.
1-800-435-0705 for Customer Service
Description
Long Sleeve Compression F-Connector Port
Seals, 1/2 in.
Qty.
Cat. No.
Bag of 100
89-127
www.idealindustries.com
E-11
Compression Connector Instructions
Compression F-Connector
1. Use IDEAL Data T®-Cutter (45-074) to cut cable
to desired length.
2. Use IDEAL Coax Stripper (45-603 or 45-526) to
strip coax to proper dimensions.
• Proper strip length settings will leave 1/4” of
center conductor exposed and 1/4” of
braiding (shield) exposed.
• After stripping, make sure tip of center
conductor is straight and not bent. Straighten
conductor if necessary.
3. Fold back outer layer of braiding (shield)
against cable jacket. Keep braid strands as
straight and as close to jacket as possible.
• Note: For Quad Shield cables (with 4 layers:
outer braid, outer foil, inner braid, inner foil),
first fold back outer braiding. Use 45-074 to
score and remove exposed 1/4” of outer foil.
Remove outer foil, and fold back inner
braiding.
4. Push F connector on to prepared
cable until white center dielectric is
flush with bottom of the nut of the
F connector.
5. Insert connector/cable assembly into
the OmniSeal™ Pro XL compression
tool, squeeze handle completely to
compress fitting. Remove completed
cable assembly.
STEP 1
45-074
STEP 2 & 3
1 ⁄4”
1 ⁄4”
STEP 4
STEP 2
STEP 5
45-603
Compression RG-11 F-Connector
Compression Connectors
1. Use IDEAL Data T®-Cutter (45-074) to
STEP 1
cut cable to desired length.
2. Use IDEAL Coax Stripper (45-111) to strip
RG-11 coax to proper dimensions.
• Proper strip length settings will leave 1/4”
(minimum) of center conductor exposed
and 1/4” of braiding (shield) exposed.
• After stripping, make sure tip of center
45-074
conductor is straight and not bent. Straighten
conductor if necessary. Conductor must be
STEP 2
straight to make proper contact with pin
contact inside of connector.
3. Fold back outer layer of braiding (shield) against
cable jacket. Keep braid strands as straight and
as close to jacket as possible.
• Note: For Quad Shield cables (with 4 layers:
outer braid, outer foil, inner braid, inner foil),
45-111
first fold back outer braiding. Use 45-074
to score and remove exposed 1/4” of outer foil. Remove outer
foil, and fold back inner braiding.
4. Measure and mark cable insertion length.
Align tip of center conductor with bottom of
hex nut fitting of connector. Mark or lightly
score cable jacket near base of connector.
Connector should be within 1/8” of this mark
after it is pushed on to cable. If it is more than
1/8” away from mark, continue STEP 4
rocking and guiding connector
on to cable. Approximately
1-1/4” of cable length should
be inserted into connector
prior to compressing the
connector.
5. Insert the connector/cable assembly into
OmniSeal™ Pro XL compression tool (adjust
plunger setting if necessary), squeeze handle
completely to compress fitting. Remove
completed cable assembly.
STEP 2 & 3
1 ⁄4”
1 ⁄4”
STEP 5
Compression BNC/RCA Connectors
1. Use IDEAL Data T®-Cutter (45-074 to cut
STEP 1
cable to desired length.
2. Use an IDEAL coax stripper (45-603 or 45-526)
to strip coax to proper dimensions.
• Proper strip length settings will leave 1/4”
(minimum) of center conductor exposed and
1/4” of braiding (shield) exposed.
45-074
• After stripping, make sure tip of center
conductor is straight and not bent. Straighten
STEP 2
conductor if necessary. Conductor must be
straight to make proper contact with pin
contact inside of connector.
3. Fold back outer layer of braiding (shield) against
cable jacket. Keep braid strands as straight and
as close to jacket as possible.
• Note: For Quad Shield cables (with 4 layers:
45-603
outer braid, outer foil, inner braid, inner foil),
first fold back outer braiding. Use 45-074
STEP 2 & 3
to score and remove exposed 1/4” of
1 ⁄4”
outer foil. Remove outer foil, and fold
back inner braiding.
STEP 4
STEP 5
1 ⁄4”
E-12
www.idealindustries.com
4. Measure and mark cable insertion length. For
BNC’s, align tip of center conductor with top of
the nut fitting. For RCA’s, align tip of center
conductor with top of retention collar. Mark or
lightly score cable jacket near base of
connector. Connector should be within 1/8” of
this mark after it is pushed on to cable. If it is more than 1/8” away
from the mark, continue rocking and guiding connector on to cable.
Approximately 1-1/4” of cable length should be inserted into the connector
prior to compressing connector for BNC. Approximately 1-1/8” of cable
length should be inserted into connector prior to compressing connector
for the RCA.
5. Insert connector/cable assembly into OmniSeal™ Pro XL compression tool,
squeeze handle completely to compress fitting. Remove completed cable
assembly.
1-800-435-0705 for Customer Service
DataComm/Networks
Crimpmaster™ Crimp Tools & Die Sets
High quality ratchet-type crimp tool for electricians, contractors and installers who require guaranteed repeatability of good mechanical
and electrical connections.
Dies change quickly and easily
with a screwdriver. Interchangeable
dies provide versatility
in a single tool.
Cat. No.
Crimpmaster™ Crimp Frame Tool
30-506
Also available in these kits:
Crimp release provides
operator safety.
33-400
33-917
Ratchet crimp action
provides repeatable and reliable
terminations.
30-556
RJ-11 Crimp Tool for two, four
or six-position modular plugs
Tool w/die N/A
30-559
RJ-45 Eight-position Crimp
Tool for keyed or non-keyed
modular plugs
Tool w/die 30-522
30-560
RJ-45 Eight-position Crimp
Tool for AMP RJ-45 modular
plugs
Tool w/die 30-521
30-570
RG-6, RG-174, Belden-Type
RG-8281 cables (Hex. 0.324
(8.23mm), 0.178 (4.52mm), 0.068 (1.73mm)
Tool w/die N/A
30-573
Cambridge CP-88, CP-89
BNC/TNC coax connectors
with RG-58, RG-59/RG-62
AU cables (Hex 0.305
(7.75mm), 0.068 (1.73mm),
0.228 (5.79mm)
Tool w/die 30-481
30-576
RG-174, Mini 59 BNC/TNC
Connectors (Hex, 0.178
(4.52mm), 0.128 (3.25mm),
0.068 (1.73mm)
Tool w/die 30-485
30-577
N-Series and RG-8/11
Connectors (Hex, 0.429
(10.90mm), 0.100
(2.54mm), 0.080 (2.03mm)
Tool w/die 30-482
1-800-435-0705 for Customer Service
30-578
RG-59, RG-6, and 8281 50
and 75 OHM cables (Hex,
0.324 (8.23mm), 0.255
(6.48mm), 0.068 (1.73mm),
0.042 (1.07mm)
Tool w/die 30-483
30-572
16-26 AWG (1.31mm2 - .128mm2)
miniature insulated rings, spade
and butt splices
Tool w/die N/A
30-581
RG-58, RG-59/62, BNC/
TNC Coax Connectors (Hex,
0.255 (6.48mm), 0.213
(5.41mm), 0.068 (1.73mm)
Tool w/die 30-502
30-582
F-type CATV RG-59, RG-6
Connectors (Hex, 0.350
(8.89mm), 0.320 (8.13mm),
0.255 6.48mm)
Tool w/die 30-503
30-579
22-10 AWG (.324mm2 - 5.261mm2)
insulated terminals/color coded
nests
Tool w/die 30-500
30-587
RG-58, RG-174 and
G-8218 for both 50 and
75 ohm cables (Hex 0.213
(5.41mm), 0.178 (4.52mm),
0.068 (1.73mm), 0.042
(1.07mm)
Tool w/die N/A
30-591
Plenum and Non-Plenum
Thinwire Cables RG-58 and
59 (Hex, 0.213 (5.41mm),
0.190 (4.83mm), 0.068
(1.73mm), 0.042 (1.07mm)
Tool w/die N/A
30-593
Mini UHF and BNC/TNC 5
cavity (Hex, 0.052 (1.32mm),
0.068 (1.73mm), 0.100
(2.54mm), 0.213 (5.41mm),
0.255 (6.48mm)
Tool w/die N/A
30-580
22-8 AWG (.3mm2 - 8mm2)
non-insulated terminals
Tool w/die N/A
30-586
22-12 AWG (.324mm2 - 3.31mm2)
Non Insulated Open Barrel
Connectors, Commercial Type
Tool w/die N/A
30-594
Fully Insulated quick disconnect
terminals with thinner wire
barrels 22-10 AWG
(.324mm2 - 5.261mm2)
Tool w/die N/A
Crimp Tools/Die Sets
Pressure adjustment
for actuation force.
Description
30-599
30-18 AWG (.205mm2 - 2.08mm2)
Open Barrel Pins and Sockets
Tool w/die N/A
30-479 (Tool w/die)
For insulated terminals,
22-10 AWG with built-in
locator
www.idealindustries.com
E-13
F-Type Coaxial Connectors
F-Series Connectors utilize threaded couplings and cable conductors as contacts for CATV and other UHF applications.
n Available in the three most popular styles, RG-6/6Q/59
n All brass design
n One-piece body design
n Crimp with the Crimpmaster™ 30-503 Crimp Tool
Connector Type
Cable Type
F
RG-6
F
Crimp
RG-6 Quad
F
Termination Type
RG-59
Crimp
Crimp
Qty.
Cat. No.
Card of 4
84-017
Card of 10
85-037
Card of 50
85-017
Box of 100
86-017
Card of 4
84-030
Card of 10
85-057
Card of 50
85-030
Box of 100
86-030
Card of 4
84-016
Card of 10
85-036
Card of 50
85-016
Push-On F-Connectors, RG-6 & RG-59
Twist-On F-Connectors, RG-6 & RG-59
n No terminator tool required
n After cable is stripped, simply twist on connector
n All brass nickel-plated construction
n No termination tool required
n Knurled nut for superior grip
n Available in two styles, RG-6 and 59
n Designed for indoor use
Connector Type
F
Coaxial Connectors
F
Cable Type
RG-6
RG-6 Quad
F
RG-59
RCA
RG-6
Qty.
Cat. No.
Card of 4
85-065
Cat. No.
85-053
89-165
Card of 50
85-039
85-1165
Box of 100
86-039
Card of 4
85-066
Card of 4
84-018
Jar of 50
85-166
Card of 10
85-035
Box of 1,500
85-1166
Card of 4
85-067
Jar of 50
85-167
Card of 10
89-500
Cat. No.
Coax Connector Kit w/Economy Coax Stripper and four RG-6
Push-on Connectors
33-320
n Works on compression and hex connectors
n New comfort grip handle aids in
E-14
Qty.
Card of 10
Jar of 50
Description
installing and removing
connectors on coax cable
Cable Type
Box of 1,500
Connector Installation Tools
Connector Type
35-046
F
F
RG-6
RG-59
Coax Strip and Crimp Tool
n Precision, form-ground stripping
holes remove outer jacket
and insulation from
RG-59 and RG-6
coaxial cable
n Durable blades cut
copper-coated steel
conductors
n Three crimping nests for
crimping F-connectors
and ring terminals
(Kit includes ten connectors)
n Cushioned, comfort-grip handles
Description
Cat. No.
F & BNC Coax Connector Tool - 8 in.
35-046
Description
Cat. No.
F & BNC Coax Connector Tool - 12 in.
35-042
Coax Strip & Crimp Tool
30-433
F & BNC Coax Connector Tool - 16 in.
35-043
Coax Strip & Crimp Tool Kit w/ten RG-6 F-Connectors
30-433F
www.idealindustries.com
1-800-435-0705 for Customer Service
DataComm/Networks
F-Type Adapters & Terminators
n Nickel-plated brass construction
n For 75Ω applications
Description
Qty.
Cat. No.
1GHz Female-to-Female F-Type Coaxial Adapter
Card of 10
85-031
3GHz F-Splice Adapter, high bandwith, OMHz to 3GHz for standard and high definition applications,
<0.25dB insertion loss, >25dB return loss
Card of 4
85-339
Female to RCA Male Adapter – converts female F-connectors to male RCA connectors
Card of 2
85-936
Coax Cable F-Terminators - for all open ports on coax wall plates and splitters
Card of 10
85-038
90° F-Adapter - F-female to F-male coax adapter
Card of 2
85-070
BNC Connectors
n Connector construction covers both plenum and non-plenum cable jackets
n Captive gold center contacts provide maximum conductivity and minimal resistance
n Nickel plating resists corrosion, tarnish and ensures signal quality
n Meets military specifications. MS39012 and MIL202 where applicable.
Connector
Type
Cable
Type
Center
Conductor
BNC Plug
RG-59
20 AWG Solid
Jacket
Non-Plenum
Connector
Impedance
Insulation
Qty.
Cat. No.
Bag of 5
85-502
75 Ohm
Delrin
Box of 100
86-502
Bag of 5
85-512
Plenum
BNC Plug
RG-6
18 AWG Solid
Non-Plenum
75 Ohm
Delrin
Bag of 5
85-545
BNC Adapter
—
Jack to Jack
—
50 Ohm
Delrin
Bag of 5
85-590
BNC Twist-on Plug
RG-59
22-23 AWG Solid
Non-Plenum
50 Ohm
Delrin
Bag of 5
85-480
LA-4173
F to BNC Adapter Kit
4-Way Indent Crimp Tools
D-Sub/Double-D Service Tool
Crimps solid barrel contacts for
RS232 interface connectors.
Features four-way indent dies
(per MS22520 specifications),
full cycle ratchet, built-in pin and
socket locator and comfort-grip handles.
n Exact replacement of the AMP open barrel service tool for stamped
contacts and D-Sub contacts
35-465
n High-grade steel construction for outstanding performance
n Also crimps Double-D,
high density,
miniature contacts
n Includes openings for crimping insulated terminals and cutters
for machine screws
Description
Cat. No.
20-26 AWG (.519 mm2 - .128 mm2) RS232 D-sub
Round Barrel Contacts, Pins or Sockets
35-465
Description
Cat. No.
35-468
D-Sub/Double-D Service Tool
30-426
Trompeter BNC Connector Center Pins
1-800-435-0705 for Customer Service
Connectors/Tools
n Available in both small and bulk quantities to suit a range of application requirements
www.idealindustries.com
E-15
Ratchet Telemaster™
Punch Down Tools
Adjustment for
Hi/Lo settings
Storage for extra
blade
Visual indicator for
cut or non-cut side
n For paired conductors
n
Ratchet version of
popular Telemaster™
Tool for RJ-45 and
RJ-11 modular plugs
n Repeatable crimp action for consistent, high quality
connections
Replaceable
Blade
Release for
the storage blade
Multi-colored to help
distinguish between
cut & non-cut side
of the blade
35-485
Description
Cat. No.
Ratchet Telemaster™
30-696
Replacement Cut & Strip Blade Set for 30-696
LA-4102
Telemaster™ Telephone Tools
n For paired conductors
35-492
Impact Turn-Lock™ Punch Down Tools
Cat. No.
Punchmaster™ II Punch Down Tool - body only
35-483
Punchmaster™ II Punch Down Tool w/110 blade
35-485
Punchmaster™ II Punch Down Tool w/66 blade
35-487
Non-Impact Turn-Lock™ Punch Down Tools
Cat. No.
Punch Down Tool w/110 blade
35-492
Economy Punch Down Tool
Cat. No.
Non-impact Tool w/permanent non-cut blade
35-185
n Multi-function telephone
tool cuts, strips and
crimps for easy one-tool
application
n Steel frame for long-term durability. (Crimps primary modular plug
strain relief only) Description
Kit
Cat. No.
Tool Only
Cat. No.
Tool for RJ-11 (1, 2, 3 pair) and RJ-45 (4 pair) Plugs
33-700*
30-496
Tool for RJ-22 (handset) and RJ-11 (1, 2, 3 pair)
N/A
30-499
Replacement Cut and Strip Blade Set for Telemaster™
N/A
LB-1747
*Kit includes 10 each, RJ-45 8P8C, RJ-11 6P6C and RJ-11 6P4C modular plugs.
Modular Plug Tool Kit
35-495
110 Blade
35-497
66 Blade
35-407
110/66 Blade
35-478
Krone® Blade
35-479
Bix® Blade
Tools
Removable Blades*
Cat. No.
110 Turn-Lock™ blade
35-495
66 Turn-Lock™ blade
35-497
110/66 combo blade w/cutting edges
35-407
Krone blade
35-478
Bix® blade
35-479
®
*Not applicable for Economy Punch Down tool.
Bix® is a registered trademark of Nortel. Krone® is a registered trademark of Krone, Inc.
Multi-function telephone/
network tool; cuts, strips
and crimps
Steel frame construction
for durability
n Interchangeable dies allow
for crimping RJ-45 and
RJ-11 modular plugs
n Tool-less die change for
added convenience
n Spring return handle for
comfort
n
n
Die Set
RJ-11
RJ-45
Also available in these kits:
33-505
E-16
www.idealindustries.com
33-706
Description
Cat. No.
Modular Plug Tool Kit - includes ten each RJ-11, 6P4C Telephone
Plugs & RJ-45, CAT 5e Data Plugs, RJ-11 & RJ-45 Die Sets
33-296
1-800-435-0705 for Customer Service
DataComm/Networks
Modular Plugs
Kinetic Super™ Wire
Stripper/Crimper
n Cuts and strips
22 to 24 AWG
n Crimps IDC
Connectors
Description
Cat. No.
Kinetic Super™ Wire Stripper/Crimper
45-719
Kinetic Super™ Wire Stripper/Crimper Kit – includes 25
IDC connectors (UR-I, 3-Wire Butt Splice)
33-719
Insulation Displacement
Connectors (IDC)
Description
85-900
85-925
8-Position 8-Contact, RJ-45
n Use with solid copper single-conductor
wire
85-950
n Kinetic Super™ Wire Stripper/Crimper easily cuts and strips 22 to 24 AWG solid wire
Qty.
Cat. No.
UR-I, 3-Wire Butt Splice IDC
25
85-925
UR-I, 2-Wire Butt Splice IDC
100
86-925
UR-I, 3-Wire Butt Splice IDC
1,000
87-925
IDC Combo Pack
25
85-960
UY-I, 2-Wire Butt Splice IDC
25
85-950
UB-I, 2-Wire Tap Splice IDC
25
85-900
Strain Relief Boots for Modular Plugs
n
n
1-800-435-0705 for Customer Service
6-Position 4-Contact, RJ-11
Cat. No.
25
85-346
50
85-396
100
86-396
250
85-1396
25
85-345
100
86-395
25
85-344
50
85-394
100
86-394
CAT 6 RJ-45 Modular Plugs
n Unique three-piece design provides
easy installation and optimal
performance
n Crimps with a standard RJ-45
crimp die
n 50 micron gold contacts,
8-position, 8-contact
Description
CAT 6 RJ-45 Modular Plugs
n Dampens cable movement and
vibrations that can result in premature connector failure
Strain Relief Boots for Modular Plugs
6-Position 6-Contact, RJ-11
Qty.
n Suitable for solid or stranded conductors – 22 – 23 AWG
Prevents broken connector tabs and
snagging while extending
connector life
Minimizes cable bends that can
reduce data speed and result
in data loss
Description
n Plugs are capable of supporting the latest EIA/TIA cable system
performance categories when installed in compliance with
appropriate EIA/TIA standards and methods
n All plugs work with 24 AWG solid or stranded conductors and
round or flat cables.
n Moisture-resistant sealant protects
wires from corrosion
Description
85-346
RJ-45
Qty.
Cat. No.
25
85-380
Qty.
Cat. No.
25
85-366
Wiring Configurations for Modular
Plugs
Pair 3
Pair 2
Pair 1
Pair 4
Pair 2
Pair 3
Pair 1
Pair 4
Pair 3
Pair 2
Pair 1
Pair 4
POLARITY
+ _ + _ + _ + _
+ _ + _ + _ + _
T R T R T R T R
1 2 3 4 5 6 7 8
T R T R T R T R
1 2 3 4 5 6 7 8
T T T R T R R R
1 2 3 4 5 6 7 8
T568-A
T568B (AT&T)
USOC
1
2
MODULAR
JACK
STUFFER
CAP
DATA
CONNECTOR
Pair 1
Connectors/Modular Plugs
IDC connectors create fast splice
and tap connections on solid copper
wires. Designed for low voltage
telecommunication cables.
85-344
RJ-11
+ + + _ + _ _ _
www.idealindustries.com
Pair 2
E-17
UTP/STP/Coaxial Cable Strippers
Cyclops® Data Cable Stripper
n Adjustable blades can be set for any depth to help ensure
nick-free stripping and slitting of cables
n Fast, easy removal of outer sheath
insulations (PVC and Plenum types,
UTP & STP)
45-164
Description
Cat. No.
Data Cable Stripper for unshielded and shielded twisted pair
cable
45-514
CAT 5e Cable
n Customizable cable
n CAT 5e solid 4-pair, CMR
rated, 24 AWG, 350 MHz cable
45-162
45-163
45-165
45-168
Description
Cat. No.
CAT 5e Cable - 100 ft.
85-780
Typical RG
Cables
Cat. No.
RG-174,
RG-187
45-162
(Gray)
In-Wall Speaker Wire
Coaxial Cable Stripper, 1/8 in. (3.2mm) to
7/32 in. (5.556mm) O.D.
Mini Coax
RG-58,CB
45-163
(Blue)
n Customizable cable
Coaxial Cable Stripper, 1/4 in. (6.4mm) to
9/16 in. (14.3mm) O.D.
RG-11, RG-8
45-164
(Blue)
Cable Stripper, 3/16 in. (4.8mm) to 5/16 in.
(8mm) O.D.
RG-59/6, UTP
Cable
45-165
(Black)
UTP/STP
45-168
(Black)
Description
Cat. No.
In-wall 2-conductor Speaker Wire - 50 ft.
85-770
Replacement Blade Set* for 45-162, 45-163,
45-165
__
L-9225
In-wall 4-conductor Speaker Wire - 100 ft.
85-771
Replacement Blade Set* for 45-164
__
L-9226
Description
Coaxial Cable Stripper, up to 1/8 in.
(3.2mm) O.D
UTP/STP Ringer Stripper, one blade
n In-wall rated 16 AWG speaker
wire
Strippers/Cables
*A set of blades consists of three straight blades and one round blade.
UTP Cable Stripper
n Strips Cat 3, 5, 5e & 6 cables
n One-step stripping
E-18
Description
Cat. No.
UTP Cable Stripper
45-167
www.idealindustries.com
1-800-435-0705 for Customer Service
DataComm/Networks
Cable/Satellite/CCTV Coax Stripper
Proper Coax Strip Procedure
1/4 in. x 1/4 in. standard strip.
n Designed for fast and easy 1/4” x 1/4” strip
lengths
n Blades auto-adjust to different diameter
coax cables
n Spinner ring for fast stripping
n Strips RG-6/6 Quad and RG-59
coax cable
1/4”
1/4”
NEW
Description
Cat. No.
Video Coax Stripper
45-321
• Proper strip length settings will leave 1/4” of the center
conductor exposed and 1/4” of the braiding (shield) exposed.
• After stripping, make sure the tip of the center conductor is
straight and not bent. Straighten the conductor if necessary.
Coax Strippers
Fold back the outer layer of braiding (shield) against the cable
jacket. Keep the braid strands as straight and as close to the jacket
as possible.
n Specific adjustments
needed for each cable
size
• Note: For Quad Shield cables (with four layers; outer braid,
outer foil, inner braid, inner foil), first fold back the outer
braiding. Use the 45-074 to score and remove the exposed 1/4”
of outer foil. Remove outer foil and fold back inner braiding.
Coax Stripper - 2 Step
• For most IDEAL compression connectors
and single crimp/twist-on BNC/TNC
• Strips 0.250 in. or 6.35mm
Cat. No.
45-526
Replacement
Cassette
45-524
(Blue)
Coax Stripper - 3 Step
• For crimp BNC and TNC connectors
• Strips braid 0.240 in. or 6mm and
45-520
45-522
(Black)
Coax Stripper - 3 Step
• For dual crimp BNC/TNC and Thinnet BNC conn.
• For 735A Belden® cable
• Strips braid 0.328 in. or 8.2mm and dielectric 0.109 in. or 2.7mm
45-521
45-523
(Brown)
Coax Cable Stripper
n For RG-6, RG-6 Quad
and RG-59
n No adjustment required
n Strips center conductor and
cable jacket
Multi-Strip Coax/UTP Cable Stripper
n Strips UTP, RG-59 and RG-6 coax cable
n Provides a 1/4 in. (minimum) x 1/4 in.
strip on coax
n Spare cartridge compartment
provided
n Push-on ring for easy
connector termination
Description
Coax/UTP Cable Stripper
45-603
RG-6/59 Replacement Cartridge
LB-2726
RG-7/11 Replacement Cartridge
LB-2728
UTP Replacement Cartridge
LB-2727
Coax Stripmaster® Wire Strippers
33-320
Description
Cat. No.
Coax Cable Stripper
45-320
Coax Connector Kit w/four Push-On F-Connectors
33-320
RG-11 Coax Stripper
n Provides precision stripping with easy spring
cushion grip
n Knife-type blades feature multiple hole
diameters sized for two step removal of outer
jacket insulation and center conductor
Description
n For use with IDEAL RG-11
compression connectors
(89-211, 89-1211), provides
1/4 in. x 1/4 in. strip
Description
Cat. No.
RG-11 Coax Stripper for Compression Connectors
45-111
Coax Cable
Type (RGU)
Cat. No.
Repl. Blade
Cat. No.
Coax Stripmaster® for RG-6
RG-6
45-262
LB-740
Coax Stripmaster® for RG-59
RG-59
45-265
LB-743
Coax Stripmaster® for RG-6
RG-6
Quad Shield
45-282
LA-3953
RG-58
45-264
—
MediaTwist
45-274
—
Coax Stripmaster® for RG-58
Coax Stripmaster® for MediaTwist
1-800-435-0705 for Customer Service
Cat. No.
Strippers
Description
www.idealindustries.com
E-19
Round Cable Slitting and Ringing Tool
Electrician’s Scissors
n Cuts around cable jacket as well as
slits the length of jacket for
easy removal
n Designed for use in telephone and
n Use with single or multiple
conductor cable up to
1.75 in. O.D.
n Serrated surface on back blade
n Blade adjusts for jacket thicknesses up to .125 in.
n Stripping notches strip 19 and 23 AWG wire
n Spare blade in handle base
n Chrome over nickel plating
electrical service applications
n Cut up to 16 AWG solid and
Description
Cat. No.
Round Cable Slitting and Ringing Tool
45-144
Replacement Blades for 45-144 (2/pkg.)
LB-1748
12 AWG stranded wire
edge cleans wire
Description
Cat. No.
Electrician’s Scissors w/stripping notches
35-088
Data T®-Cutter
Cable Splicing Kit
n Cuts round communication cable and
maintains cable geometry for
better cable performance
n Cuts multi-pair cable up
to .500 in. (12.7mm)
and coaxial cable up to
RG-9/U
n Suitable for soft cables (not ACSR)
n Steel reinforced center conductors can be
trimmed with bolt cutting holes
n Locking latch keeps tool closed in pouch
n Kit designed for use in telephone and
Splicing Knife remains sharp
and cuts easily through many
insulation types
n Kit includes Scissors, Splicing Knife and
Description
Cat. No.
Data T -Cutter
45-074
®
electrical service applications
n High carbon steel blade in
Leather Holder
Description
Cat. No.
Cable Splicing Kit (Scissors, Splicing Knife, Leather Holder)
35-093
Lever™ Snips Electrician’s Scissors
with Stripping Notches
Cutters/Scissors
n Ergonomic design gives
added leverage
n Spring-action,
mechanical advantage
increases stripping
leverage and reduces operator fatigue
n Double plated for added rust protection
n Extra-deep serrations grip wire better
Description
Cat. No.
Electrician’s Scissors with Stripping Notches
35-087
Also available in these kits:
33-917
E-20
www.idealindustries.com
33-623
1-800-435-0705 for Customer Service
DataComm/Networks
Surge Suppression Cable Splitters
Digital Surge Suppression Cable Splitters withstand a one-time surge up to 6KV on cable line
n Bandwidth: 5 MHz - 1 GHz
n Printed Circuit Board Design
n Impedance: 75 ohm
n Nickel-plated Housing
n Over 130 dB of RFI Shielding
n Splits signals up to 4 outlets
n Low 8 db Insertion Loss
Description
Cat. No.
2-Way Surge Suppression Splitter
85-135
4-Way Surge Suppression Splitter
85-137
2.4 GHz Satellite and Digital
TV Splitters
Use terminators (85-038) on all
unused ports for optimal performance.
1 GHz Splitters
n Nickel-plated housing
n High-performance impedance - balanced Printed Circuit Board
design
n Bandwidth: 5MHz - 1 GHz Impedance: 75 Ohm; over 120 dB
of RFI shielding; Splits signals up to 8 outlets
85-332
85-333
n Designed for easy mounting over cable
85-132
85-134
85-334
n All ports are F female connectors, 75Ω
85-133
n Two grounding screws eliminate the need for grounding
block
n All ports power pass
Cat. No.
2-Way, 5MHz - 2.4GHz
85-332
3-Way, 5MHz - 2.4GHz
85-333
4-Way, 5MHz - 2.4GHz
85-334
Description
Cat. No.
High Performance Cable Splitter, 5MHz-1GHz, 2-Way
85-132
High Performance Cable Splitter, 5MHz-1GHz, 3-Way
85-133
High Performance Cable Splitter, 5MHz-1GHz, 4-Way
85-134
Digital Cable Splitter, 8-Way
85-138
Grounding Block
Diplexer 5 MHz - 2.1 GHz
n Solid zinc alloy, nickel plated and
n Combine or split cable/antenna signals
n High Performance beryllium
n Use two Diplexers per installation,
n Electrical performance rated 0 - 3 GHz
n High quality PCB design
n Dual grounding holes can accept up to #6 wire
n Nickel-plated die-cast zinc housing
chromate finished
copper contact
Splitters
Description
with satellite signals
one to combine and one to split
n Grounding hole for up to 6 AWG wire
Description
Cat. No.
3 GHz Double Grounding Block
85-311
1-800-435-0705 for Customer Service
Description
Cat. No.
Diplexer, 2.1 GHz, SATV/TV Combiner Splitter - 2 Amp
85-323
www.idealindustries.com
E-21
Pro Installer Kit - 33-945
n This professional kit includes a mix of tools that are needed by anyone who does low
voltage installation or maintenance.
n Kit Includes:
35-427
30-603
30-696
35-046
35-087
Large Mouth Bag – 18 in.
OmniSeal™ Compression Tool
Ratchet Telemaster™
F-Connector Tool
Lever™-Snips Electrician’s
Scissors
Cable Splicing Knife
Torpedo Level
Mag-Tape™ Tape Measure
Jab Saw
110/66 Blade
Tongue & Groove Pliers –
10 in.
35-091
35-205
35-238
35-275
35-407
35-430
35-473
35-485
35-497
35-908
35-4038
45-074
45-165
45-526
62-160
62-164
Probe Pic and Spudger
Punchmaster™ II 110 Blade
only
66 Blade only
7-in-1 Twist-a-Nut™
Screwdriver/Nutdriver
Long Nose Pliers – 8 in.
Data T®-Cutter
UTP/STP Stripper
Coax Stripper - 2-Step
Tone Generator
Amplifier Probe
Master Series Network Service Kit - 33-706
NEW
n Kit allows user to cut, strip, terminate and test data cables.
n Kit Includes:
30-696
35-485
35-473
45-165
35-093
35-497
62-200
35-908
Ratchet Telemaster™
Punchmaster™ II w/110 Blade
Probe Pic and Spudger
UTP/STP Stripper
Electrician’s Scissors
66 Blade only
LinkMaster™ Tester
7-in-1 Twist-a-Nut™ Screwdriver
33-864
62-096
45-719
85-396
35-410
PRO Amplifier Probe & Tone
Generator Kit
Smart6™ Modular Tester
Kinetic Super™ Wire Stripper/
Crimper
8-Position, RJ-45 Modular Plugs,
qty. 50
Large Mouth Bag – 13 in.
RF Coax Crimp & Compression Kit - 33-410
NEW
n This professional kit allows user to crimp or compress coax connectors. Multiple die
sets give the Crimpaster™ Crimp Tool a wide range of connectors it can terminate.
n Kit Includes:
30-793
Kits
30-503
45-526
45-520
45-523
45-074
OmniSeal™ Pro XL
Compression Tool
Ratchet Crimp Tool
2-Step Coax Stripper
3-Step Coax Stripper
45-521 Replacement Cassette
Data T®-Cutter
30-581
30-573
30-576
92-650
35-535
58/59, BNC/TNC Die Set
RG-59 Cambridge-type Die Set
RG-174, Mini-59 Die Set
RG-6 RTQ Compression
F-Connector, 50/jar
Mechanic’s Bag
Low Voltage Starter Kit - 33-920
n This starter kit allows user to terminate jacks and modular plugs as well as coax
connectors.
NEW
n Kit Includes:
30-496
30-633
45-321
35-492
45-074
E-22
Telemaster™ Telephone Tool
Economy Compression Tool
Cable/Satellite/CCTV Coax Stripper
Punch Down Tool w/110 blade
Data T®-Cutter
www.idealindustries.com
35-497
30-503
45-168
35-535
66 Blade only
Ratchet Crimp Tool
UTP/STP Ringer Stripper,
one blade
Mechanic’s Bag
1-800-435-0705 for Customer Service
DataComm/Networks
Data/Video Kit - 33-917
n Kit includes professional tools to terminate both coax and twisted pair cables. VDV
gives user the ability to test terminated cables.
n Kit Includes:
30-522 Crimpmaster™ Crimp Tool for
RJ-45 Modular Plugs
30-793 OmniSeal™ Pro XL Compression Tool
33-856 VDV MultiMedia Cable Tester
35-046 Coax Connector Tool F & BNC
35-088 Electrician’s Scissors
w/Stripping Notch
35-407 110/66 Blade Combo
Punch Down Blade
35-410 Large Mouth Bag — 13 in.
35-473 Probe Pic and Spudger
35-485 Punchmaster™ II Punch Down
Tool w/110 Blade
35-908 Twist-a-Nut™ 7-in-1
Screwdriver
45-074 Data T®-Cutter
45-165 UTP Stripper
45-526 Coax Stripper w/Replaceable
Cartridge
62-164 Amplifier Probe
Coax Termination Hip Kit - 33-624
n IDEAL for anyone who is installing security cameras, cable or satellite TV, or working
with general coax compression installations.
n Kit Includes:
30-793
45-603
36-240
OmniSeal™ Pro XL Compression Tool
Data T®-Cutter
45-074
Coax/UTP Cable Stripper
Cabinet Tip Screwdriver, 1/8 in.
Compression Connector Installation
Kit - 33-623
n This basic kit includes tools to cut, strip and terminate coax cables.
n Kit Includes:
45-074
45-320
30-633
Data T®-Cutter
Coax Cable Stripper
Economy Compression Tool
Pouch w/belt clip
Service Compression Kit - 33-630
n This service kits includes both F and BNC connectors as well as the professional tools to cut,
strip and terminate coax cables. Designed for security and cable/satellite installation.
n Kit Includes:
45-074
45-262
89-127
89-047
OmniSeal™ Pro XL Compression Tool
Data T®-Cutter
Coax Stripmaster® Wire Stripper
for RG-6
Compression F-Connector Port
Seals, qty. 5
BNC RG-6 Compression
Connectors, qty. 10
89-048
BNC RG-59 Compression
Connectors, qty. 10
92-650 RG-6 RTQ Compression
Connectors, 50/jar
92-660 RG-6 Plenum Compression
Connectors, qty. 10
LA-3953 Replacement Blade for 45-262
Kits
30-793
Economy Compression Kit - 33-620
n The 33-620 is a starter kit that includes the tools and connectors to cut, strip and terminate
coax cables.
n Kit Includes:
30-633
45-074
45-526
92-610
Economy Tool
Data T®-Cutter
Coax Stripper
92-650
1-800-435-0705 for Customer Service
RG-59 RTQ Compression
Connectors, qty. 10
RG-6 RTQ Compression
Connectors, qty. 30
www.idealindustries.com
E-23
Technician’s Service Kit - 33-505
n Kit includes tools to install twisted pair cable on blocks and data jacks.
n Kit Includes:
35-088
35-473
35-485
35-497
35-908
Electrician’s Scissors w/
Stripping Notches
Probe Pic & Spudger
Punchmaster™ Punch Down
Tool w/110 Blade
45-165
62-205
66 Blade Only
7-in-1 Twist-a-Nut™
Screwdriver/Nutdriver
UTP/STP Stripper
Nylon case
RJ-45/11 Four, Six & Eight-Position
Combination TelCom Termination Kit - 33-704
n This TelCom Kit is designed for the user who will terminate RJ-11 and RJ-45 twisted
pair cables.
n Kit Includes:
30-496
85-344
85-345
85-346
Telemaster™ for RJ-11/RJ-45 Plugs
4-Position, RJ-11 Modular Plugs, qty. 15
6-Position, RJ-11 Modular Plugs, qty. 15
8-Position, RJ-45 Modular Plugs, qty. 15
RJ-45 Termination Kit - 33-750
n This kit is suited for the user who will cut and terminate RJ-45 Modular Plugs. The kit includes 50
modular plugs, enough to make 25 separate cables.
n Kit Includes:
30-496
45-165
85-346
Telemaster™ for RJ-11/RJ-45 Plugs
UTP/Coax Stripper
8-Position, RJ-45 Modular Plugs, qty. 50
Telemaster™ Crimp Kit - 33-700
n This kit is the Telemaster™ tool along with 30 modular plugs.
n Kit Includes:
30-496
85-346
86-395
85-344
Telemaster Tool for RJ-11 (1, 2, 3 pair) and RJ-45 Plugs
RJ-45 8P8C, qty. 10
RJ-11 6P6C, qty. 10
RJ-11 6P4C, qty. 10
Kits
PRO Network/Telco Installer Kit - 33-506
n This kit gives the user the ability to terminate modular plugs as well as data blocks or jacks.
NEW
n Kit Includes:
30-696
35-485
35-473
45-165
Ratchet Telemaster™
Punchmaster™ II 110 Blade only
Probe Pic and Spudger
UTP/STP Stripper
35-088
35-497
85-396
35-535
Electrician’s Scissors w/Stripper
Notches
66 Blade only
8-Position, RJ-45 Modular Plugs, qty. 50
Mechanic’s Bag
Crimpmaster™ 10Base-T RJ-45
Crimping Kit - 33-652
n This foam fitted kit includes the Crimpmaster™ Crimp Tool with an 8-position die set as well as
200 RJ-45 Modular Plugs. Kit allows user to cut, strip and terminate twisted pair cables.
n Kit Includes:
30-506
30-559
E-24
Crimpmaster™ Crimp Tool Frame
only
8-Position Die Set for RJ-45 Plugs
www.idealindustries.com
45-074
45-165
86-396
Data T®-Cutter
UTP/Coax Stripper
8-Position RJ-45 Plugs, qty. 200
1-800-435-0705 for Customer Service
DataComm/Networks
33-960 Series - Micro OTDRs
Designed with installers in mind, 33-960 Series Micro OTDRs offer excellent performance and
ease of use in a truly handheld, lightweight and rugged package. Available as either an 850/
1300 nm (multimode) or 850/1300/1310/1550 nm (multimode and single mode) OTDR, they
are ideally suited for the installation and troubleshooting of LAN, campus and WAN fiber
networks. Both models combine high measurement precision with the user friendliness of onebutton operation resulting in accurate characterization of connectors and splices in addition to fast
and reliable fault location.
With the MB option, these OTDRs provide clear PASS/FAIL indications. Distance, loss and ORL for
each event is reported in a trace summary table making full certification of the link possible. Each
OTDR is shipped in a kit containing everything you need to get started on the job, including a
ruggedized carrying case, PC software, rechargeable batteries and wall charger.
n Short Attenuation and Event Dead Zones — for accurate location and characterization of events
n Autotest Function — provides simple one-button operation
n Fast Data Acquisition — important for troubleshooting intermittent problems
n Certifying OTDR Option — for tier-2 certification
n Optional Macro Bend detection — accurately detects macro bends in singlemode fiber
Specifications
Kits
33-960-10
33-960-30
Wavelength [nm]
850, 1300
850, 1300, 1310, 1550
Dynamic Range [dB]
24 / 25
24 / 25 / 29 / 28
Attenuation dead zone [m]
11 / 11
11 / 11 / 11 / 12
Pulse width [ns]
10, 30, 100, 275, 1000, 2500, 10000
Event dead zone [m]
2.5 worst case
Launch Conditions (MM)
Class CPR 1 or 2
Linearity [dB / dB]
± 0.03
Loss threshold [dB]
0.05
Loss resolution [dB]
0.01
PC-Software
CD with manual and Quick
Reference Guide
CD with manual and Quick
Reference Guide
Wall charger
Wall charger
2 Li-Ion rechargeable batteries
2 Li-Ion rechargeable
batteries
33-960-10MB
33-960-30MB
OTDR Kit with Tier 2
certification option and
macro bend detection
± (0.75 + 0.0025% x distance +
sampling resolution)
MM: 0.1 to 40 SM:
0.65 to 160
0.1 to 40
-1.5
MM: -1.5 SM -6.5
21 CFR 1040.10 and IEC 608251:1993+A2:2001 / Class 1M
Hardware
All Models
Memory capacity
500 traces
Data connectivity
USB A and USB B
Size (HxWxD) [mm]
250 x 125 x 75 (9.8 x 4.9 x 2.9 in.)
Weight
1 kg (2.2 lbs.)
Temperature
Operating: -18°C to 50°C , Storage:
-40°C to 70°C
Batteries
2 x Li-Ion
Power supply (mains)
110 – 230 V AC
Power supply (unit)
9 - 24 V DC, 12 Watt
Operating time
Ruggedized carrying case
PC-Software
Up to 30000
Distance uncertainty [m]
Laser Safety
Ruggedized carrying case
1 SC and 1 FC Adapter
4
Stable source output power
[dBm]
Quad OTDR with
850/1300/1310/1550nm
SC Adapter
Typical real time refresh
[1/sec ]
Distance range [km]
33-960-30 Quad OTDR Kit
MM OTDR with 850/1300nm
0.16 to 5
Sampling resolution [m]
Sampling points
33-960-10 MM OTDR Kit
Ordering Information
Description
Cat. No.
200x and 400x video probe w/USB port
33-960-VP
Adapter for FC connectors
33-961-10
Adapter for SC connectors
33-961-20
Adapter for ST connectors
33-961-30
Adapter for E2000 connectors
33-961-40
Adapter for DIN 47256 connectors
33-961-50
Adapter for HMS-10/AG connectors
33-961-60
Cleaning Kit
OTDR
Testing
1912-00-1621
Rechargeable battery
33-960-BP
Foldable USB Keyboard
33-960-KB
8 hours (per Bellcore™
TR-NWT-001138)
Warranty
1 year
1-800-435-0705 for Customer Service
www.idealindustries.com
E-25
FiberMASTER™ Fiber Optic Test Kit
Measure fiber optic power in milliwatts (mW) and decibel-milliwatts (dBm) to test and troubleshoot
active LANs. Quickly measure cabling loss with the automatic calibration feature that stores reference
power from any light source for quick dB loss calculations. Plus, the 1490nm wavelength
measurement mode is perfect for troubleshooting emerging Fiber-To-The-Home cabling systems.
n Fiber Optic Power Meter & Light Source — Four wavelength power meter for multimode
and single mode testing, and 850nm multimode LED light source.
n Calibration Function — Stores reference power level for quick dB loss measurements
eliminating the need to manually calculate loss.
n Save Time and Money — Power meter features 2.5mm universal and FC adapters, light
source includes ST®, SC and FC adapters to test the most common interfaces.
n Ready for FTTx — 1490nm measurement wavelength for use with nearly all single mode
Fiber-To-The-Home applications.
n Designed for the Field — Unique “docking” light source and easy three-button
operation make this the perfect fiber tester for use in the field.
FiberMASTER™ Kit Includes:
• 33-926 Light source, 850nm LED with ST®, SC and FC adapters
• 33-927 Power meter, 4 wavelength with universal 2.5mm and fixed FC adapter
• 2x FC-SC 62.5um multimode cables
• 1 SC calibration coupler
• Carrying case
• English, Spanish, German, French, Portuguese, Italian and Chinese user’s manual
Description
Cat. No.
850NM Fiber light source
33-926
Power meter only
33-927
Power meter with 850NM fiber light source (33-926 & 33-927)
33-928
Four wavelength MM/SM light source only
33-929
Power meter with four wavelength MM/SM light source
(33-927 & 33-929)
33-931
Power Meter Specifications
Wavelength
850, 1300/1310, 1490, 1550nm
DetectorInGaAs
Measurement Range -60 to +3dBm
Accuracy±5%
Display Resolution
.01
Connector
Universal 2.5mm w/FC adapter
Power Supply
AAA Alkaline Battery x 3
Operating Time
360 hours
Operating Temp
-10 to +60°C
Storage Temp
-25 to +70°C
Fiber Optic Tester
Light Source Specifications
850, 1300, 1310, 1550nm laser diode
Wavelength
Output Power
-6 to -7 dBm Typical
Stability
.05dB after 15min, 0.1dB over 8 hrs
Connector
2.5mm w/ST®, SC, FC adapters
Power Supply
AAA Alkaline Battery x 3
Operating Time
40 hours
Operating Temp
-10 to +60°C
Storage Temp
-25 to +70°C
33-929
E-26
www.idealindustries.com
1-800-435-0705 for Customer Service
DataComm/Networks
Fiber Inspection Microscope
MiniLite-Strip™ Optical Fiber Stripper
n 100X magnification for
viewing multimode
connectors
n Small strip notch engineered
n Includes 2.5mm
connector “Universal
Adapter” for FC, ST®
and SC style connectors
n Oblique illumination provides excellent view of ferrule
cleanliness and core condition
n Rugged, rubberized metal housing, precision glass optics
and a built-in laser safety filter
n White LED illumination delivers 100,000 hours bulb life
n Optional 200X Conversion Eyepiece threads on for viewing
finish/polish of singlemode connectorsD
Description
Cat. No.
Fiber Inspection Microscope w/carrying case
45-332
1.25mm Connector Adapter
45-334
MTRJ-Style Connector Adapter
45-335
200X Conversion Eyepiece for Singlemode Connectors
45-336
Note: ST® is a registered trademark of AT&T.
Visual Fault Finder
Laser light source used to locate breaks, faulty
splices and crimps
n 2.5mm Universal Adapter for all ST®, SC and
FC connectors
45-352
Lite-Strip™ Optical Fiber Stripper
V-notch blades strip a wide range
of outer cable jacket. Precisionground, replaceable knifetype blades strip tight
buffer tube insulations
(900µm). Also strips
mechanically strippable
coatings from 250 microns
to 900 microns.
n Replaceable precision-ground blades cleanly strip buffer coatings
n One-step, 900 micron stripping hole provides broader stripping range
n Slim, pocket-sized tool in rugged solid
aluminum body
n Extra durable to withstand normal drops without requiring tool realignment
n Nylon carrying case with belt loop included
Visual Fault Finder
Cat. No.
MiniLite-Strip™ Optical Fiber Stripper
after every application
of continuous use
Description
Description
n Improved spring mounting returns handles to original position
n Two AA batteries provide over 30 hours
jacket
n Strip notches pre-set and locked, no field adjustment necessary
n New funneled hole makes cable insertion easier
n Useful over a distance of 5km (3 miles)
n Larger round strip notch machined to remove the 3mm outer
Cat. No.
VFF5
Note: ST is a registered trademark of AT&T.
n New gauge color makes fiber and hole identification easier
n Improved comfort-grip handles for an easier, more comfortable
stripping process
®
Description
Stripmaster® Ribbon Fiber
Jacket Strippers
Lite-Strip™ Optical Fiber Stripper
(900µm/250µm)
Fiber Sizes
Cat. No.
125µm, 140µm
45-350
n Removes jacket from Ribbon Fiber without
damage to the Kevlar® strength member of
the Ribbon Fiber
Fiber Optic Tools
and precision-ground
to strip 900 micron or
250 micron buffer coatings
from 125 micron fiber
Note: Frame and blade-set sold separately.
Description
Cat. No.
Stripmaster Wire Stripper Frame only
L-5620
Blade-set for use with Corning Plenum and Riser Ribbon
Fiber Cable
LB-1152
Blade-set for use with Corning “Fanout” Ribbon Cable
LB-1153
®
Note: Kevlar is a registered trademark of DuPont.
®
1-800-435-0705 for Customer Service
www.idealindustries.com
E-27
Plastic Polishing
Fixture
DualScribe™ Double-Ended
Fiber Optic Scribes
n Universal fitting accepts all ST®, SC
n Three professional quality blade styles
and FC connectors with 2.5mm
ferrules
to choose from to meet your specific
needs – Ruby, Sapphire, Carbide
n Economically priced
n Color-coded handles for quick,
easy identification
Red – Ruby
Blue – Sapphire
Black – Carbide
n Grooved face for polishing efficiency
n Precision tool used by manufacturers, contractors and in tool kits
n 30° single bevel – DualScribe™
reversible blade doubles tool life
n Soft non-slip grip provides precise
45-342
Note: ST is a registered trademark of AT&T.
control during scribing
damage when not in use
Description
Cat. No.
Plastic Polishing Fixture
®
n Clear safety cap protects the blades from
Description
Handle Color
Cat. No.
Ruby Blade Fiber Optic Scribe
Red
45-357
Sapphire Blade Fiber Optic Scribe
Blue
45-358
Carbide Blade Fiber Optic Scribe
Black
45-359
Stainless Steel Polishing Fixture for
Optical Fiber ST® and
SC Type Connectors
Produces polished fiber optic ST® and
SC type connectors for optimum
connector performance.
n Precision-machined, stainless-steel
Serrated Cutter (For Kevlar®)
with Breaker Notch
disk provides accurate polishing angle
for desired end face finish
n Stainless-steel hardness maintains long life and resists uneven wear
n Stepped surface reduces drag and friction for easier polishing
n Two-Step process significantly
Description
Cat. No.
Polishing Fixture for Optical Fiber ST/ST® Type Connectors
45-341
Note: ST is a registered trademark of AT&T.
®
increases the life of this rugged tool
n Superior quality high-carbon stainless steel with molybdenum
and vanadium provides the super-hard edges needed to stand
up to the demands of today’s market
Fiber Optic Tools
n Textured cushioned-grip handles
n Value-priced for contractors, cable assembly houses, fiber
installers/technicians and tool kits
Description
Cat. No.
Serrated Cutter w/Breaker Notch (Patent pending)
45-344
Note: Kevlar is a registered trademark of DuPont.
®
Polishing Films for Fiber
Optic Connectors
45-338
n For optimum connector
45-337
45-339
polishing results, we
recommend a three-step
procedure using 0.5µm,
3µm and 12µm 3 in. x 6 in.
aluminum oxide polishing
films
n Lot-to-lot consistency in our
Split-Tip Fiber Optic Swabs
n Split-tip design cleans fiber easier
n A single sheet will typically yield 10 to 20 connectors when using
and more efficiently than other
methods
the recommended 3-step procedure
n Tube/handle is pre-loaded
with 99% isopropyl alcohol
n A single swab can be used
for many cleanings or until the
alcohol is gone
Description
Split-Tip Fiber Optic Swabs
E-28
www.idealindustries.com
films means repeatable connector
finishes on ceramic, stainless steel,
plastic and composite ferrules
Qty.
Cat. No.
Bag of 20
45-360
Description
Color
Qty.
Cat. No.
0.5µm, 3” x 5”, Aluminum Oxide
Ivory
20 films/sleeve
45-337
3.0µm, 3” x 5”, Aluminum Oxide
Lt. Yellow
20 films/sleeve
45-338
12µm, 3” x 5”, Aluminum Oxide
Lt. Red
20 films/sleeve
45-339
1-800-435-0705 for Customer Service
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement