Simply Audio

SOUND-BROADCASTING

Simply Audio

SHORT CATALOGUE 2006 EN

SOUND SYSTEM SPECIALIST

Microphones

M936

Hand-held microphone

Specifi cations: Dynamic cardioid (for voice)

Impedance: 600 Ohm

Frequency response: 50 ÷ 15.000 Hz

Sensitivity: 2,5 mV/Pa

Length of cable supplied (m): 5

Output plug: Male XLR

Weight (g): 236

Accessories for the above: Swivelling joint for

mounting on stem

new

M976

Specifi cations: Dynamic cardioid

(for voice/music)


Frequency response:

Sensitivity: 2,5 mV/Pa

Length of cable supplied (m): 5


Weight (g): 270


mounting on stem

new

MC250

Hand-held microphone

Specifi cations: Electret hypercardioid



Sensitivity: Phantom 11-52 V, 2mA

Power supplies: 11 ÷ 52 V

Control: fi ltro parola e Sensitivity


Weight (g): 148


mounting on stem

Length of cable supplied (m): 4,5

MC260

new

Specifi cations: Elettrete cardioide



Sensitivity: Phantom 5,6 mV/Pa, 2mA

Power supplies: 9 ÷ 52 V

Length of stem (mm): 550


Weight (g): 140

new

B260

Microphone base for MC260

Size (L x H x D) mm: 120 x 40 x 125

Weight (g): 1170

Material: Zama

Table-top Microphone Bases new

Specifi cations: Not pre-amplifi ed

Chime: -

Inclusion key

Select

Leds: 1


Sensitivity:

Length of cable supplied (m):

Power supplies: 12 Vcc - 8 mA

new

Specifi cations:

Chime: -

Inclusion key

Select

Leds: 1

Impedance:

Sensitivity:

Length of cable supplied (m):


C101-W

MC101-WP

Flat microphones

MC101

MC101-P

Specifi cations: Electret cardioid hemicardioid

Impedance: 1 KOhm


Sensitivity: 64 dB (0 dB=1 V/0,1 PA)

Power supplies: 1,5 V battery (MC101 / MC101- W)

8 - 24 VDC Phantom power supply (MC101-P / MC101- WP)

Casing: Die-cast aluminum (white / grey / anthracite)

Length of cable supplied (m): 3 (unbalanced) +8 (balanced)


Size (L x D) mm: 90 x 115

Weight (g): 260

Accessories for the above: Battery holder, 1 pen-like battery, 1.5 V

new


Chime: Yes

Inclusion key

Select

Leds: 1

Impedance: 1K Ohm

Sensitivity: adjustable

Connection: Rj 45

Power supplies:

2 new

B711/12

Microphone base with


Chime: Yes

Inclusion key

Select

Leds: 1




new

B711/6

Microphone base with


Chime: Yes

Inclusion key

Select

Leds: 1




B53-B

Microphone base

Specifi cations: Pre-amplifi ed

for supermarkets

Inclusion key: 1

Leds: 1


Sensitivity: 3,15 V

Length of cable supplied (m): 1,5 (with DIN 5-pole plug)


R850

UHF receiver new

Wireless microphone station

Our range of wireless microphones and receivers operates in the UHF band (from 798 to 826 MHz), with

144 selectable channels, a battery-charge indicator, scanning with automatic frequency searching and

PLL technology.

new

MA853

Lavalier transmitter microphone (tie-clip) new

MA855

Hand-held transmitter microphone microphone

5000 range Mixer Amplifi ers and Booster Units

Versatile, simple to use, tough and reliable: these are the main features of this range of amplifi ers designed for a vast range of sound-broadcasting applications for either commercial or industrial use.

5000 Range Mixer Amplifi ers

• Protection of the end stage and transformer for constant-voltage lines (connection of all the speaker units in parallel on two-wire lines).

• Balanced microphone inputs, each with its own volume control, suitable both for dynamic microphones and for a condenser /electret microphones (PHANTOM power supply).

• Dedicated input for audio connection to a PABX for sending announcements over the telephone and/or an emergency signal with a higher priority (the background music, if any, and the other microphone inputs will be automatically cut off).

• Additional inputs for music sources with front-panel switch.

• Two-tone warning signal generator (CHIME) with ON/OFF switch

• Outputs for a recorder, audio processors and/or cascade connection of another amplifi er.

• Signal of the selected music source always available on the line output and MOH

‘Music On Hold’ power output (1W/8 Ohms) to drive a monitor loudspeaker directly or for sending the signal to other equipment or to PABX’s.

• 3 front-panel switches for selecting three sound-broadcasting zones and a fourth all-call zone

• Independent volume controls, treble and bass control and general volume control

• Power output displayed by means of a LED-Meter set in dB’s.

• Cooling fan, with automatic speed adjustment in relation to the temperature of the heat sink to which the power devices are applied

5000 range Booster Units

• Protection of the end stage and transformer for constant-voltage lines (connection of all the speaker units in parallel on two-wire lines).

• Electronically balanced line input with a double socket making cascade connection of several units easier


• Two-tone warning signal generator (CHIME) with ON/OFF switch

• Signal of the selected music source always available on the line output and MOH

‘Music On Hold’ power output (1W/8 Ohm) to drive a monitor loudspeaker directly or for sending the signal to other equipment or to PABX’s.

• 3 front-panel switches for selecting three sound-broadcasting zones and a fourth all-call zone

• Treble and bass control and general volume control

• Power output displayed by means of a LED-Meter set in dB’s.

• Cooling fan, with automatic speed adjustment in relation to the temperature of the heat sink to which the power devices are applied

AX5060 - AX5120 - AX5240

Mixer Amplifi ers 60 W - 120 W - 240 W

Output power RMS: 60 W (AX5060) - 120 W (AX5120) - 240 W (AX5240)

Outputs: 100, 70, 50 V 8 Ohm

Microphone inputs: 4 (1 with VOX and 2 with Micro/Phantom/Line switches)

Emergency/Telephone Input: 1

Inputs for music sources and/or pre-amplifi ed

inputs with front-panel switches: 2

Power supplies: 220/115 Vca 24 Vcc

Size (L x H x D) mm: 430 x 88 x 267

Weight (kg): 7,6 (AX5060) - 9,7 (AX5120) - 11,5 (AX5240)

Rack-mounting: AC55 (2 U)

AW5120 - AW5240

Booster units 120 W - 240 W

Output power RMS: 120 W (AW5120) - 240 W (AW5240)

Outputs: 100, 70, 50 V 8 Ohm

Line input: 1



Size (L x H x D) mm: 430 x 88 x 267

Weight (kg): 9,6 (AW5120) - 11,4 (AW5240)


3

3300 range Mixer Amplifi ers

The mixer amplifi ers of the

3300 range are extremely versatile and suitable for systems for announcements and background music in bars, restaurants, shops, churches, mosques, factories and so on.

• Protection of the last stage and transformer for constant-voltage lines (connection of all the speaker units in parallel on two-wire lines).

• Balanced microphone inputs, each with its own volume control, suitable both for dynamic microphones and for condenser/electret microphones (PHANTOM power supply).

• Front-panel microphone input (on the rear on model AX3303) with priority circuit on the other inputs (VOX) and control of the activation threshold.

• Dedicated input for audio connection of a PABX for sending announcements over the telephone and/or an emergency signal with a higher priority (the background music, if any, and the other microphone inputs are automatically cut off).

• Additional inputs for music sources with front-panel switches.

• Two-tone warning signal generator (CHIME)

• Output for a recorder and/or cascade connection of another amplifi er.

• Signal of the selected music source always available on the MOH ‘Music On Hold’ power output (1W/8 Ohm) for driving directly a monitor loudspeaker or for sending the signal to other equipment or to PABX’s (except for model AX3303).

• Independent volume controls, treble and bass control and general volume control (for models AX3306 and AX3312 only).

• Power output displayed by means of LED-meter set in dBs (except for model

AX3303).

AX3306

Mixer Amplifi er 60 W -

AX3312

Mixer Amplifi er 120 W

Output power RMS / max: 60/90 W (AX3306) - 120/180 W (AX3312)

Outputs: 100, 70, 50 V 8 Ohm

Microphone inputs: 3 (1 on front panel with Vox)





Size (L x H x D) mm: 485 x 89 x 330

Weight (kg): 8 (AX3306) - 10 (AX3312)


new

AX3304


Output power RMS / max: 40/60 W

Outputs: 100, 70, 50 V 8 Ohm

Microphone inputs: 3 (1 on front panel with Vox)





Size (L x H x D) mm: 360 x 89 x 285

Weight (kg): 5,8


AX3303


Output power RMS / max: 30/45 W

Outputs: 100, 70, 50 V 8 Ohm

Microphone inputs: 1 with Vox





Size (L x H x D) mm: 360 x 89 x 285

Weight (kg): 5


Mixers – Equalisers – Antilarsen

The MX8033 preamplifi er-mixer has a certain number of audio inputs that can be further expanded, PHANTOM power supplies for electret microphones and - thanks to the precedence circuit - several levels of microphone priority.

The P8023 single-channel graphic equaliser has 31 adjustment steps in one thirds of an octave. It is used typically in sound-reinforcement systems for acoustic compensation of the rooms.

The P8024-B feedback controller is capable of reducing the effects of speaker-tomicrophone acoustic feedback (better known as the Larsen effect), by attenuating the frequencies at which these effects are initiated.

P8023

Graphic equaliser

Frequency response (0/-3 dB): 10 ÷ 50.000 Hz (±0,5 dB)

Inputs: Balanced/unbalanced line input

Outputs: Balanced/unbalanced line output

Power supplies: 230 /117 Vca, 50/60 Hz

Size (L x H x D) mm: 480 x 44 x 220


Rack-mounting: Direct (1/2 standard 19” unit)

Adjustement: 31 fi lters in 1/3 octave steps

4

MX8033

6-input mixer Mic. + Line

Frequency response (0/-3 dB): Microphone: 100 - 17.000 Hz - Aux: 40 - 21.000 Hz

Inputs: 6 microphones + 4 aux + 1 B711 amplifi ed base

with Phantom (excl. IN 1-2)

Outputs: 1 Line - 1 Tape

Power supplies: 230 Vca 50/60 Hz - 24 Vcc

Size (L x H x D) mm: 482 x 88 x 315


Rack-mounting: Direct (2 standard 19” unit)

P8024-B

Antilarsen

Frequency response (0/-3 dB): 20 ÷ 20.000 Hz

Inputs: 1 Line (in/out)

Outputs: 1 Line

Power supplies: 230 V AC 50/60 Hz - 24 Vcc

Size (L x H x D) mm: 483 x 44 x 210


Rack-mounting: Direct (1 standard 19” unit)

Compact systems for broadcasting voice and music

Whether an installation is large or small, it will need especially reliable, versatile and practical sound and music reproduction equipment. PASO compact systems are designed to meet in the most rational way needs connected with the broadcasting of music programmes interrupted by advertising and service messages or, in specifi c circumstances, alarm messages.

Shops, stores, restaurants and small hotels can be signifi cantly improved by installing these systems. PASO compact systems combine two high-quality music sources particularly tough for withstanding continuous service in public areas, a professional amplifi er ( 120 W for the PA312-MP3 and the PA212 and 40 W for the PA140-MP3) plus all the accessories needed to include them in a sound-broadcasting system. Models

PA312-MP3 and PA140-MP3 each have a CD/MP3 player and an AM/FM tuner, while model PA212 incorporates a recorder/player and an AM/FM tuner.

• Warning signal generator (except for PA140-MP3)

• Additional input for an external music source

• Front-panel switches for selecting the sound-broadcasting zones (except for

PA140-

MP3)

• Treble and bass control and general volume control

• Balanced microphone inputs, each with its own volume control, suitable both for dynamic microphones and for a condenser/electret microphones (PHANTOM power supply) (only for model

PA312-MP3).


• Contact for activating precedence of microphone signals over the background music programme.

PA312-MP3

Amplifi ed tuner-CD player with selection of 2 zone

Output power RMS: 120 W

Outputs: 100, 70, 25 V 8 Ohm

Microphone inputs: 4 (1 with Vox)


Inputs for music sources and/or pre-amplifi ed inputs: 1

Selection zones: 2


Size (L x H x D) mm: 430 x 88 x 280

Weight (kg): 10,3


PA212

Amplifi ed tuner-cassette player with selection of 2 zones


Outputs: 100, 70 V 8 Ohm

Microphone inputs: 4 (1 with Vox)



Selection zones: 3


Size (L x H x D) mm: 450 x 150 x 330

Weight (kg): 11

Rack-mounting: P8035 Tray

PA140-MP3

Amplifi ed tuner-CD player


Outputs: 100, 70, 50 V 4, 8, 16 Ohm

Microphone inputs: 2



Power supplies: 220 Vca

Size (L x H x D) mm: 400 x 100 x 310

Weight (kg): 7

Rack-mounting: P8035 Tray

Alarm signal / message generators and automatic volume adjustment

DAG9200 - B

The DAG9200-B generates 9 types of alarm signal, and it is also possible to record and play out a voice message.

N° of alarms / messages: 9 / 1

Max. message recording time: 0 to 58 sec.

Length of alarms / messages played out : 60 sec. / continuous

Microphone passband (Hz): 550-3.000

Output A and output B: -

Mixed output: 0-2 mV

Power supplies: 230 Vca 24 Vcc

Size (L x H x D) mm: 410 x 50 x 230

Kit for rack mounting: 27/2466

DMG9016

The

DMG9016 can record digitally up to 16 different messages and store them statically, with a maximum message-length capacity of 240 seconds. As the memory is separated into two blocks (A and B), with separate outputs, it is possible to broadcast two different messages simultaneously.

N° of alarms / messages: 0 / 8+8

Max. message recording time: 0 to 120 sec. + 0 to 120 sec.

Length of alarms / messages played out : - / free

Microphone passband (Hz): 100-3.400

Output A and output B: 0-900 mV

Mixed output: 0-600 mV

Power supplies: 230 Vca 24 Vcc

Size (L x H x D) mm: 410 x 50 x 230

Kit for rack mounting: 27/2466

The DLC9000 is a device for automatically adjusting the sound level for broadcasting in environments featuring variable background noise such as, by way of example, a railway station (the level of the background noise is higher when the station is crowded than when it is not). The DLC9000 automatic volume adjuster uses a microphone, supplied separately, to measure the ambient noise ( M936 or

MC101-P). Support for rack-mounting: 27/2466 (1 U).

The DTM9000 is a device for playing out automatically the messages contained in the DMG9016 digital recorder at intervals of time selected by means of a rotary switch from among the following: 5, 10, 15, 20, 30 minutes. The DTM9000 can only be used together with the DMG9016, by which it is powered and to which it sends the commands for activating the various different pre-recorded messages.

5

6

6-zone Control Units for voice/music broadcasts

This equipment will enable a maximum of 6 zones to be selected from a dedicated microphone base. It is possible to connect the system so that it functions with either one or two channels (one or two amplifi ers). With a single dedicated amplifi er for both voice and music, calls to zones will stop any music being broadcast throughout all the zones. If, on the other hand, two amplifi ers are connected (one for music and the other for speech), it is possible to continue broadcasting music to the zones not affected by the call.

The zones will be selected by means of double-contact relays, one of which will be used for the override function (cancellation of any attenuators on the loudspeaker line, threewire connection). There must be 4 inputs for possible auxiliary sources, with a selector switch and level control on the front panel. Six switches on the front panel will enable the music to be activated/de-activated in the various different zones.

On the rear panel it will be possible to connect the microphone stations and, if required, an emergency audio source (message or alarm-tone generator) with automatic priority.

A switch will enable priority of the emergency input to be programmed at a higher or lower level than the basic call. Six LEDs on the front panel will indicate the status of the call in progress. Size: (L x H x D): 482 x 44 x 233 mm. Can be installed directly on a 19” rack, height: 1 modular unit.

P8036

P8036 6-zone voice/music control unit

1000 range Amplifi cation Systems for Vehicles

The ideal application for the amplifi ers of our 1000 Range is anywhere where there is no mains power, and in particular on board vehicles. This range was designed according to standard DIN sizes, so as to make the equipment as simple as possible to install.

Flexible, handy and safe to use: these are the special features of this range of products suiting all sorts of commercial and professional applications.

Volume controls for each microphone input and external audio source if required. External audio source switch on the model with the dual input (T1140). Priority circuit on the other microphone inputs (VOX) with level control of the threshold for activating automatic exclusion of any background music programme and of the other microphone inputs.

M1-NC

Microphone for the 1000 range

TR7/8

TR7/4

Horn including dynamic unit

Output power: 18 W


Size of opening (mm): 260 x 16

Length (mm): 220


27/360

Supporting plate for horns, complete with elastic strap and hook

T1120-B

Amplifi er

Output rated / maximum output: 10 W-12 Vcc; 20 W-24 Vcc

Uscita a Impedance costante: 4 Ohm a 12 Vcc; 8 Ohm a 24 Vcc

Front-panel control: 1 Vol Micro; 1 Vol Aux; 1 Tone

Inputs: 1 Micro; 1 Aux

Power supplies: 24/12 Vcc

Size (L x H x D) mm: 200 x 50 x 100


T1140

Amplifi er

Output rated / maximum output: 40 W-12 Vcc

Constant-impedance output: 4, 8, 16 Ohm


Inputs: 2 Micro; 2 Aux; with front-panel switch


Size (L x H x D) mm: 200 x 50 x 190


T1220-LB

Amplifi er with

cassette player

Output rated / maximum output: 2 x 10 W-12 Vcc; 2 x 20 W-24 Vcc

Constant-impedance output: 4+4 Ohm a 12 Vcc; 8+8 Ohm a 24 Vcc


Inputs: 1 Micro; 1 Aux


Size (L x H x D) mm: 200 x 50 x 190


LAX range Current Amplifi ers

The amplifi ers of the

LAX range have been designed specifi cally to transmit sound by inductive means, and their particular application is in sound-broadcasting systems for users of hearing aids. Most modern hearing aids have a two-position switch marked with the letters M and T. The M position is for “normal” listening through the Microphone. The T (Telecoil) position is for receiving sound inductively, by means of a special coil built into the hearing aid. The output from the current amplifi er, which is connected to the audio source, feeds a loop made of insulated normal copper wire that is positioned suitably (normally, around the edge of the room). The current fl owing through the loop generates a variable magnetic fi eld inside the room that is “induced” in the coil inside the hearing aid. This means that perfect audio reception of speech, messages and music with no interference will be possible in special dedicated areas for hearing-aid users.

LAX200 - LAX450 - LAX800

Maximum area mq: 200 (LAX200) - 450 (LAX450) - 800 (LAX800)

Inputs: 2 microphone inputs (XLR),

1 selectable MIC/LINE input (XLR), mono jack 3.5 mm

Outputs: monitor

Coil impedante: da 0,1 Ohm a 1 Ohm

Power supplies: 230 V, 50/60 Hz

Size (L x H x D) mm: 430 x 44 x 220

Weight (kg): 3,71 (LAX200) - 4,00 (LAX450) - 4,34 (LAX800)

Rack-mounting: Using a 27/4555 support (1 19” standard unit)

Accessories: Lasc100 (SCART adapter for TV) - LATR100 (interface for 100 V line)

LAX20 - LAX50

Maximum area mq: 20 (LAX20) - 50 (LAX50)

Inputs: 2 Inputs microphone (jack mono 3,5 mm)

Outputs: monitor

Coil impedante: da 0,1 Ohm a 1 Ohm

Power supplies: 230 V, 50/60 Hz

Size (L x H x D) mm: 91 x 170 x 33

Weight (kg): 0,59

Accessories: LASC50 (SCART adapter for TV)

LATR50 (interface for 100 V line)

LAC50 (inductive coil for doors or tables)

new

C420-T

Column 20 W

Output power (adjustable): 20 W (20-10-5 W)

N° of loudspeakers: 4 + 1 tweeter


Sound pressure (PNom/1m): 105 dB

Angle of dispersion (2 kHz): 160° (horiz.) 30° (vert.)

Class of protection: IP44

Size (L x H x D) (mm): 95 x 520 x 80


C430-T

Column 30 W new

Output power (adjustable): 30 W (30-15-7,5 W)






Size (L x H x D) (mm): 95 x 725 x 80


new

C440-T

Column 40 W







Size (L x H x D) (mm): 95 x 890 x 80


C450-TW

Column 50 W new

Output power (adjustable): 50 W (50-25-12,5 W)






Size (L x H x D) (mm): 95 x 520 x 80


Sound columns

Range C400 Sound Columns

The sound columns of the C400 range are characterised by their small size and high acoustic performance.

They consist of an extruded aluminium weight-bearing structure painted pale grey. The new columns of the

C400 range feature loudspeakers with an extensive response range and high-effi ciency tweeters that enable perfect intelligibility of speech and perfect reproduction of music. In particular, model C450-TW is suitable for outdoor use, even in bad weather. S4-G swivelling support included in the supply.

C624-T (24 W) Wooden Column

The use of a walnut heartwood structure, combined with the quality of the loudspeakers, give the

C624-T

column special prestige. It is suitable for installation in places of worship, congress halls, boardrooms and so on, where - in addition to acoustic quality - refi ned but unobtrusive aesthetics are required, making them easy to fi t in with the pre-existing furniture. It has a “speech enhancer” fi lter activated by the user for improving the intelligibility of speech in particularly critical acoustic conditions. AC904 swivelling support included in the supply.

C624-T

Wooden Column 24 W


N° of loudspeakers: 6





Size (L x H x D) (mm): 140 x 870 x 100


C46-TW

Sound projectors

ABS Sound Projectors

These sound projectors, made of UV-stabilised ABS, self-extinguishing rating UL94-V0, ensure optimum sound reproduction and high acoustic performance. There are models for indoor installation ( C55, C56/6-T, C48/6-T and C48/6-2T) and others that are moisture-proof (C46-TW, C48/12-TW e C48/12-2TW) or watertight (C55-S and C55-TW).

C55

C55-S

C55-TW

C48/6-T

C48/12-TW

C48/6-2T

C48/12-2TW C56/6-T

Model

C46-TW

C48/12-TW

Special features

One-directional, for outdoor use


Output rated

(adjustable)

6 W (6 - 3 - 1,5 W)

12 W (12 - 6 - 3 W)

C48/12-2TW

Two-directional, for outdoor use 12+12 W (24 - 12 - 6 W)

Transformer

Inputs

N° of loudspeakers

100, 70, 50 V 1

Frequency response

Angle of dispersion

2 kHz

Sound pressure

(Pnom/1m)

140 ÷ 15000 Hz 180°

96 dB

Colour pale grey

Class of protection

Size

(Lxhxd) (mm)

Weight

(kg)

1

100, 70, 50 V

100, 70, 50 V

1

2

150 ÷ 15000 Hz

170 ÷ 12000 Hz

160°

2 x 140°

99 dB

98 dB white white

IP54

IP44 Ø 140 x

IP65

Ø 115 x 160

Ø 140 x 207

IP44 Ø 140 x

IP65 Ø 140 x 207

1,7

2,2

C55

One-directional, for indoor use 20 W (20 - 10 - 5 W) 100, 70, 50 V 1 130 ÷ 16000 Hz 70°

102 dB white IP44 Ø 200 x 220 3

C55-TW

One-directional, for outdoor use 40 W (40 - 20 - 10 - 5 W) 100, 70, 50, 25 V 1 130 ÷ 10000 Hz 110°

103 dB grey and black IP66 Ø 200 x 220 3,5

7

Sound projectors

Aluminium Sound Projectors

new

Watertight speaker units especially suitable for use outdoor even in bad weather. The models with the suffi x

-V have been designed for use in safety systems (

VES) and are equipped with thermal fuses that insulate the speaker unit from the rest of the system in the event of a thermal overload, and with fl ame-proof terminal for connection.

C86/20-TW C86/20-V

Waterproof sound projectors 20 W

Model

Special features

C86/20-TW


Output rated

(adjustable)

20 W (20 - 10 - 5 W)

N° of loudspeakers

1

Frequency response

150 ÷ 15000 Hz

Angle of dispersion

2 (kHz)

Sound pressure

(Pnom/1m)

90° 103 dB

C86/20-2TW C86/20-2V

Waterproof two-directional sound projectors 20 W

Colour

Class of protection

Size

(LxHxD) (mm)

Weight

(kg) grey

C86/20-2TW

Two-directional, for outdoor use wo-directional, for outdoor use VES

20 W (20 - 10 - 5 W) 2 150 ÷ 15000 Hz 2 x 110° 100 dB grey

IP66

IP66 180 x 145 x 178 2,4

IP66

180 x 145 x 178

95 x 80 x 725

2,4

2,9

Horn loudspeakers with separate units new new new

8

TR1-B

Circular horn

(without driver)

UT60

60 W

Driver new

UT35

35 W

Driver

TR2-B

Rectangular horn


TR3-B

High-effi ciency horn


Exponential horns are speaker units for outdoor use. Grey-coloured, they are unbreakable and weatherproof. They have a swivelling bracket for fi xing it in place and have a rear sealing capable to hold magnetodynamic units

(drivers) available separately (see table below) in order to reach high effi ciency and sound pressure levels.

TR400-SX

Very high effi ciency horn


Model

Frequency response

Effi ciency

(1W/1m)

Sound pressure

(Pnom/1m)

(1)

(1)

TR1-B

TR2-B

300 ÷ 5.000 Hz

TR3-B

300 ÷ 5.000 Hz

300 ÷ 5.000 Hz

108 dB 123 dB

(1) 110 dB

(2)

TR400-SX

300 ÷ 5.000 Hz

(1) Reference measurements carried out with a UT35-T unit.

(2) Reference measurements carried out with a UT-150 unit.

125 dB

Angle of dispersion

Horiz. / Vert. 2 (kHz)

50° - 50°

Weight

(kg)

1,2

55° - 40° 2,1

Driver units

UT150

150 W

Driver

UT35-T

35 W Driver new adjustable power

UT60-T

60 W Driver adjustable power

Model

Special features

Output rated

Effi ciency Impedance

(1)

(1)

(1)

UT35

for TR1-B / 2 / 3 35 W 109 dB

UT60

for TR3-B and TR400-SX 60 W 110 dB

(1)

(2)

UT150

for TR400-SX 150 W 114 dB

(1) Reference measurements carried out with a TR3-B horn.

(2) Reference measurements carried out with a TR400-SX horn.

16 Ohm

-

16 Ohm

-

16 Ohm

1,3

100 V 1,75

1,55

100 V 2,1

3,1

TR20-HF

TR40-HF

16 and 40 W two-way horns, extended range

TR10-TW

10 W horn

Horn loudspeakers complete with units

Aluminium Horn Loudspeakers

These high-effi ciency loudspeakers are watertight and particularly suitable for use outdoor even in bad weather.

Models TR10-TW and TRX20-TW/V have a die-cast aluminium housing with stainless steel screws and brackets. The horn is made of aluminium sheeting in the 20 W and 30 W models and of shockproof ABS in model TR10-TW. Each model has a line transformer with a rear switch for selecting the output power. Model TRX20-V is designed for use in safety systems and has a line transformer with 4 KV insulation, a thermal fuse for separating the speaker from the system in the event of thermal overload and a fl ame-proof ( VES) terminal.

Polyproplyene Horn Loudspeakers

The TR20-HF and TR40-HF horns are two-way speakers featuring high effi ciency, an extensive frequency response and constant output. These speaker units have a reinforced polypropylene housing with a self-extinguishing rating of UL 94-VO.

TR20-TW

TRX20-V

20 W horns

TR30-TW

30 W horns

Model

TR20-HF

Output rated

(adjustable)

16 W (16 - 8 - 4 - 2 W)

TR10-TW

10 W (10 - 5 - 3 - 1 W)

TRX20-V

20 W (20 - 15 - 10 - 5 - 2,5 W)

Transformer

Inputs

100, 70, 50 V

100 V

Frequency response

110 ÷ 20000 Hz

Angle of dispersion

2 (kHz)

Horiz. 50° - Vert. 90°

450 ÷ 10000 Hz Horiz. 100° - Vert. 90°

Sound pressure

(Pnom/1m)

Class of protection

116 dB IP44

Colour

112 dB IP65

Size

(LxHxD) (mm)

Weight

(kg) pale grey pale grey

356 x 240 x 308 4,2

356 x 240 x 308 6,2

176 x 125,5 x 179,5 1,2

100 V 350 ÷ 12500 Hz 80° 123 dB IP66 pale grey Ø 213 x 230 1,5

Speaker units for wall-mounting

The C34-RB and C34-TB speaker units for wall mounting consist of a pale grey UVstabilised ABS housing with a metal front grille. The C37/6-V (to VES standards) has a metal housing, while the C36/6-T “CANDY”, which can be wall or ceiling-mounted, has a white (RAL 9003) self-extinguishing ABS housing with netting.

Its refi ned and unobtrusive design is intended specifi cally for schools, hospitals, waiting rooms, hotels, shops, offi ces and restaurants. It is ideal both for background music and for speech.

new

C34-RB

For wall-mounting,

ABS, 6 W, adjustable

C34-TB

For wall-mounting,

ABS, 6 W

C37/6-V

For wall-mounting, metal, 6 W (VES)

C36/6-T

For wall/ceiling-mounting,

“Candy”, ABS, 6 W

Model

Special features

Output rated

(adjustable)

Transformer

Inputs

100, 70, 50 V

N° of loudspeakers

1

Frequency response

90 ÷ 18.000 Hz

Angle of dispersion

2 (kHz)

Sound pressure

(Pnom/1m)

140° 98 dB

Colour pale grey

C34-RB

C34-TB

Identical to C34-RB without controller

C37/6-V

Box with output controller

Metal - VES

6 W (6 - 3 - 1,5 - 0,8 - 0,4 W)

6 W (6 - 3 - 1,5 W) 100, 70, 50 V 1 120 ÷ 15.000 Hz 130° 98 dB white

Size

(LxHxD) (mm)

Weight

(kg)

218 x 216 x 120

218 x 216 x 120 1,1

210 x 190 x 70

1,1

1,6

258 x 169 x 72 0,75

9

10

Speaker units for wall-mounting

Box-type speaker units are ideal for installing in any indoor environment, when high quality is required with accurate reproduction of both music and speech.

C402-T

6 W metal loudspeaker

C82/10-T

10 W loudspeaker

C93/30-T

C93/16-T

16 W - 30 W loudspeakers new

C92/20-T

C92/40-T

C92/20-TN

C92/40-TN

20 W - 40 W loudspeakers

C980

Two-way

Pro Bass-Refl ex speaker unit,

80 W

(max. 150 W) new

C93/30-TN

C93/16-TN

16 W - 30 W loudspeakers

Model

Output rated

(adjustable)

Transformer Inputs

N° of loudspeakers

Frequency response

Angle of dispersion

2 (kHz)

Sound pressure

(Pnom/1m)

98 dB

C402-T

6 W (6 - 3 - 1,5 W) 100, 70, 50 V 1Wf + 1Tw 200 ÷ 18.000 Hz Horiz. 210°

Vert. 140°

C92/20-T

C92/20-TN

C92/40-T

C92/40-TN

C93/16-T

C93/16-TN

C980

(10 - 5 - 2,5 W) su 100 V, 8 Ohm OFF

20 W (20 - 10 - 5 - 2,5 W) 100, 70, 50 V 1 bicono

(40 - 20 - 10 - 5 - 2,5 W) only C92/40-T ( N)

16 W (16 - 8 - 4 - 2 W)

30 W (30 - 16 - 8 - 4 W)

Bass Refl ex

16 W (16 - 8 - 4 - 2 W)

30 W (30 - 16 - 8 - 4 W)

Bass Refl ex

80 W (max 150 W/8 Ohm)

with trasform. opt. TM106-I

100, 70, 50 V only C92/40-T (

100 V, 8 Ohm

100 V, 8 Ohm

N)

100 V, 8 Ohm, 70, 50 V

TM106-I

1Wf + 1Tw

1Wf + 1Tw

1Wf + 1Tw

100 ÷ 15.000 Hz

120 ÷ 20.000 Hz

120 ÷ 20.000 Hz

60 ÷ 18.000 Hz

120°

130°

130°

Horiz. 200°

Vert. 180°

103 dB

98 dB

98 dB

116 dB

Colour /

Accessories for the above pale grey / bracket black dark grey / B102 fl oor stand,

AC930 support for B102,

AC904 wall-mounting joint

Size

(LxHxD) (mm)

98 x 185 x 75

250 x 405 x 257

Weight

(kg)

C82/10-T: white

C82/10-TN: black

C92/20-T: white

C92/20-TN: black

C92/40 e C92/40-T: white

C92/40-N e C92/40-TN: black white

180 x 280 x 160

210 x 165 x 135

2

C92/40-N: 2,2

C92/40-TN: 2,7

1,9

210 x 165 x 135

1,2

1,9

6,1

The

“ONDA” range is a line of speaker units featuring an original design and high technical and aesthetic quality. The support supplied with it can be used for mounting it on a wall or ceiling.

The quality of the design makes it a product for universal use, to meet any indoor sound-broadcasting requirements.

C95/20-T

C95/40

C95/40-T

C95/20-TN

C95/40 N

C95/40-TN

C44/20-B

C44/20-TB

C44/6-TB

AC901

Box for embedding

Panel-mounted speaker units, for embedding, 6 to 20 W

“Onda” range speaker units, 20 to 40 W, white, black

Model

Output rated

(adjustable)

Transformer

Inputs

C95/20-T

20 W (20 - 10 - 5 - 2,5 W) 100, 70, 50 V

C95/40-T

40 W (40 - 20 - 10 - 5 W)

C44/20-T

20 W (20 - 10 - 5 - 2,5 W)

100, 70, 50 V

-

100, 70, 50 V

Impedance

-

-

-

-

N° of loudspeakers

Frequency response

1 broadband 130 ÷ 20.000 Hz

Angle of dispersion

2 (kHz)

Sound pressure

(Pnom/1m)

150° 104 dB

1 Wf + 1 Tw

1 two-cone

200 ÷ 18.000 Hz

100 ÷ 15.000 Hz

120°

145°

104 dB

103 dB

Colour

Size

(LxHxD) (mm)

Weight

(kg) white / black white / black white (RAL 90 10)

215 x 320 x 93 2,1

215 x 320 x 93 2,2

215 x 320 x 93 2,8

0,88

165 x 280 x 70 1,38

0,83

Loudspeakers for embedding in ceilings

Thanks to the extremely narrow shape of the front part and the special design of the grille, the loudspeakers of this range will fi t in harmoniously in any environment. Their features are compact size, excellent acoustic performance and a special quick-fi tting system for embedding in ceilings. They are made of self-extinguishing material and suitable for indoor installation. Model C47/12-TW is recommended for particularly damp rooms (bathrooms, kitchens, swimming pools, platform shelters, etc.).

The specifi cations of the materials meet the strictest safety standards, and are also fl ameproof when the optional protective cap is fi tted, AC957 for the C57-TB or AC958 for the C58/6-TB and the C58/12-TB.

new

AC950

new

C57-TB

6 W speaker units for ceiling-mounting

Model

C57-TB

C58/12TB

Output rated

(adjustable)

6 W (6 - 3 - 1,5 W)

new

C58/6-TB

C58/12-TB

C58/24-TB

6, 12 and 24 W speaker units for ceiling-mounting

Transformer

Inputs

100, 70, 50 V

AC957

Flameproof cap for C57-TB

N° of loudspeakers

1

Frequency response

100 ÷ 15.000 Hz

Angle of dispersion

2 (kHz)

Sound pressure

(Pnom/1m)

150° 102 dB

Colour white

12 W (12 - 6 - 3 W) 100, 70, 50 V 1 80 ÷ 20.000 Hz 130° 106 dB white

AC958

Flameproof cap for C58/6-TB

C58/12-TB

Size

(LxHxD) (mm)

Weight

(kg)

Ø 180 x 110 (h) 1,1

Ø 220 x 115 (h) 1,3

Ø 220 x 115 (h) 1,45

C53/10-T

For ceiling mounting,10 W new

C52/6-T

C52/12-T

For ceiling mounting,

W6 W - 12 W

C59-T

Suspended round, 15 W

C49/6-T

Protruding, for wall or ceiling mounting, 6 W

C47/6-TB

For ceiling mounting, spring-operated, 6 W

C47/12-TW

For ceiling mounting, spring-operated, 12 W, for damp places

Model

Output rated

(adjustable)

Transformer

Inputs

100 V

N° of loudspeakers

1

Frequency response

80 ÷ 12.000 Hz

Angle of dispersion

2 (kHz)

Sound pressure

(Pnom/1m)

160° 92 dB

C52/6-T

6 W (6 - 3 - 1,5 W)

C52/12-T

12 W (12 - 6 - 3 W)

C53/10-T

10 W (10 - 5 - 2,5 W)

C47/6-TB

6 W (6 - 3 - 1,5 W)

C47/12-TW

12 W (12 - 6 - 3 W)

100 V

100, 70, 50 V

1

1

70 ÷ 20.000 Hz

110 ÷ 14.000 Hz

80°

160°

93 dB

99 dB

Colour white white white

C59-T

15 W (15 - 7,5 - 3,5 W) 100, 70, 50 V 1 70 ÷ 20.000 Hz 80° 100 dB white

Size

(LxHxD) (mm)

Ø 200 x 62 (h)

Weight

(kg)

0,64

Ø 265 x 78,5 (h) 1,2

Ø 140 x 100 (h) 0,75

Ø 140 x 100 (h) 0,9

Ø 200 x 71 (h) 1,2

Ø 200 x 176 (h) 1,8

11

12

Loudspeakers for embedding in ceilings

The loudspeakers for ceiling mounting of the “FASHION” range with an interchangeable look by Paso Industrial Design. These products feature a totally innovative technical concept and design. They consist of a basic metal structure that supports the various different components and can be mounted either on a ceiling or on a panel. The grilles are then secured to this basic structure by means of snap-on devices. The grilles can be chosen from among a range of models and colours. It is thus possible to create a wide choice of combinations and customisations to meet all sorts of technical and aesthetic demands. Specifi c fi nishes and colours are available on request.

Our SPOT loudspeakers for ceiling-mounting feature a modern design and small dimensions to meet various aesthetic interior decoration requirements. They are made of metal and can be painted in various types of paint, giving them tough and well-fi nished surfaces but maintaining excellent acoustic properties.

CSPOT/6-T

6 W, Spot

CSPOT/6-TN

6 W, Spot, black

Moon

Wave

Daisy

C67 e C68

“Fashion” range ceiling fi xtures, 6 and 12 W

CSPOT/6-TO

6 W, Spot, gold

CSPOT/6-TS

6 W, Spot, silver

Model

C67/6-T

C68/6-T

CSPOT/6-T (TN, TO, TS)

Output rated

(adjustable)

6 W (6 - 3 - 1,5 W)

6 W (6 - 3 - 1,5 W)

6 W (6 - 4 - 2 W)

Transformer

Inputs

N° of loudspeakers

Frequency response

100, 70, 50 V

100, 70, 50 V 1 broadband

100, 70, 50 V

1 broadband

100, 70, 50 V

100 ÷ 15.000 Hz

1 broadband

1 two-cone 80 ÷ 20.000 Hz

1

100 ÷ 15.000 Hz

100 ÷ 20.000 Hz

Angle of dispersion

2 (kHz)

Sound pressure

(Pnom/1m)

130° 102 dB

130°

130°

102 dB

95 dB

Colour

Size

(LxHxD) (mm)

Weight

(kg) white white white (black, gold, silver)

Ø 196 x 95 (h)

Ø 196 x 148 (h) 1,24

Ø 237 x 68 (h)

0,72

1,0

Ø 237 x 148 (h) 1,8

Ø 105 x 85 (h) 0,55

Attenuators for fl ush-mounting

Attenuators enable the audio volume to be adjusted, attenuating the acoustic yield of the speaker units connected to them for constant-voltage systems (100-70-50

V). Models with different rated outputs are available depending on the maximum loads that can be connected to them. Each has an autotransformer, a switch with 11 different positions and a front grille.

The

TL10, TL35, TL35-R and TL50 attenuators can easily be fl ush-mounted in walls using the optional 27/901 box (standard 503). Model TL35-R is equipped with relays for excluding attenuation when priority emergency signals are received by applying a 24 VDC signal – on an additional two-wire line. The attenuators of the “Europa” range, TL12-E and TL36-E can be fl ush-mounted in walls using the optional AC911 box (except for

TL100-RE) or wall-mounted using the optional AC913 and AC914 boxes. Models TL36-RE and TL100-RE are equipped with relays for excluding the attenuator when priority alarm signals are received - using additional cabling to be provided for a 24 V signal. The connections are made by means of pull-out terminal strips with slide-in type contacts.

Selector LS6-R enables selection of 6 different programmes from constant-voltage lines, on one or more loudspeakers. It is equipped with by-pass relays for priority calls and has provisions for connection to an attenuator of the TL range.

TL10

TL35

TL35-R

TL50

TL12-E

TL36-E

TL36-RE

TL50-E L56-R

Model

TL10

TL35-R

TL12-E

TL36-RE

Description

Standard Range

Standard range with relays

Europa range

Europa range with relays

TL100-RE

Europa range with relays

6-line switch, 100 W, with relays

Rated voltage

100 V

Output rated

10 W

100 V

100 V

100 V

100 V

35 W

12 W

36 W

100 W

-

Contacts of the switch

Mains power supply

Box for embedding

10 + off

10 + off

10 + off

10 + off

10 + off

-

24 V

-

-

-

-

24 V

-

24 V

27/901

27/901

AC 911

AC 911

-

Box for wall-mounting

-

-

-

-

AC 913

AC 913

AC 914

Size max

(LxHxD) (mm)

116 x 77 x 50

116 x 77 x 50

81 x 81 x 50

81 x 81 x 50

80 x 152 x 45

TL100-RE

Standalone and portable amplifi ed systems

The TCA870 portable sound system is a very handy multi-purpose unit for use in any situation in which amplifi cation of voice and music is required. Thanks to the audio output power and long battery life, it can be used both outdoor and in closed rooms. Each source has an independent volume control and an on/off switch. It has a large and powerful 3-way loudspeaker. The handle on top makes it easy to carry or it can be transported by means of a trolley enabling it to be moved even while it is being used.

Used mainly by schools, town councils, parishes and local tourist offi ces for entertainment events and conferences, it can be very useful as a stand-by system in case of failure of a fi xed system or a black-out.

It can also be positioned on a tripod.

new

TCA870

Portable amplifi ed system

MA825

Microphone with electret capsule mounted on elastic suspension

Output power RMS / max:

Distorsion: < 0,5%

Frequency response: 100 ÷ 20.000 Hz (± 3 dB)

Rapporto segnale/disturbo: 75 dBA

Power supplies: 90 ÷ 260 Vac

Time of recharges: 10 ÷ 15 hours

Frequency range: UHF

Size (L x H x D) mm: 350 x 520 x 300

Weight (kg): 17,5

Colour: Black

CA980

Active loudspeaker

Output power RMS / max: 80 W

Frequency response: 40 ÷ 16.500 Hz (Line)

210 ÷ 16.500 Hz (Micro)

Inputs: Line, microphone

Outputs: Line for cascade connection

Control: Volume control, Mic/Line switch

Power supplies: 230 Vca - 50/60 Hz

Size (L x H x D) mm: 250 x 405 x 257

Weight (kg): 8

Accessories not included in the supply: AC930 support for

mounting on B102 stem

SL1120-B

Amplifi ed lectern

The amplifi ed column-type lectern is made of matte satin-fi nish wood, and its elegant shape will fi t harmoniously into any environment. The four loudspeakers in the column ensure pleasant and uniform broadcasting of sound and speech. The dual power supply feature (from the mains or optional rechargeable batteries) enables it to be used both in interiors and outdoor. The amplifi er mixes the signals from the microphone of the lectern and from an auxiliary source

(wireless microphone receiver, recorder, CD player and so on) thanks to separate level controls.

The top of the lectern has a fl exible stem on it with a vibration-damping support for the one-way microphone included in the supply.

Output power: 25 W RMS (230 Vca), 30 W RMS (24 Vcc)


Power supplies: Rete 230 Vca - 50/60 Hz, 24 VDC with rechargeable batteries

Inputs: 1 Micro, 1 Aux, 1 wireless microphone

Control: Volume - Tone - A.P.T.

Loudspeakers 4 off Ø 200 in line

Microphone included : Dynamic, one-directional

Size (L x H x D) mm: 530 x 1150 x 450

Weight (kg): 22,5 (without buffer battery)

13

14

Standalone and portable amplifi ed systems

TA16

Megaphone, output power 10 W

Technical specifi cations:

Shockproof material, suitable for use in particularly damp rooms (swimming pools, on board ships, etc.)

Built-in anti-Larsen microphones.

ON/OFF switch.

Continuous volume control.

Power supplies: 6 of 1.5 V batteries (not included in supply)

Size (L x H x D) mm: 250 x 405 x 257

Weight (kg): 8

TA222-F1+F3

Mobile amplifi ed system with two independent mixable wireless microphone systems

Output power:

Inputs: Aux, dynamic microphone

Frequency: 175,00 and 184,32

Frequency response:

N° horns: 2

Power supplies: Internal rechargeable 12 V battery

Size (l x a x p) (mm):

Weight (kg): 4,9 (excluding base)

Accessories included in the supply: B10-N fl oor base, 2 wireless microphones,

carrier straps, rechargeable battery

and battery-charger

TA220B-FX

Mobile amplifi ed system with wireless microphones

similar to TA222B but with a single wireless microphone

ITC2000-C

Intercom counter system

C401-B

The ITC2000-C is a high-quality intercom systems for counters open to the public. It is managed by a microprocessor and its features are extremely flexible. The system has several operating modes and can be configured as a handsfree “listen/speak” system and, if connected to an amplifier, can be included in a soundbroadcasting system. This latter application is extremely interesting, since in addition to conversing through the glass the clerk at the counter can also make announcements to the public or zone calls. These can also be made, with different priority levels, from the microphones of other operators connected to the system (e.g. safety manager or other executives).

The operator station has a microphone mounted on a flexible stem that is long enough to enable conversations speaking in a normal tone of voice and at a natural volume, with no acoustic feedback problems. For the listening function on the public side, the system must be equipped with a PASO C401-B loudspeaker. Made of aluminium, this loudspeaker is extremely tough and suitable also for applications for which there is a high risk of vandalism (railway and underground stations, chemists open at night, etc.).

There are two standard connectors for 3.5 mm on the rear of the operator station, to which a headphone and/or an external microphone can be connected.

Equipment:

The ITC2000-C intercom system consists of the following:

1. Intercom base equipped with a microphone with a sponge shield to prevent hissing.

2. Junction box (telephone type) equipped with a 6-pole (female) telephone socket.

3. Cable (3 metres long) for the connection between the intercom base and the junction box equipped with

6-pole (male) telephone plugs.

4. External power supply, 230 Volt AC / 18 Volt DC, 500 mA.

5. Electret microphone for wall-mounting equipped with a shielded cable (length 3m).

This microphone is designed so that it can be installed on the glass above the counter, thanks to the vibration-damping bi-adhesive layer with which it is equipped.

Note:

The loudspeaker, non included in the supply, is the model C401-B (16 Ohms, 3 W)

Technical specifications:

Mains power supply: 15 Vdc

Absorption: 60 mA ÷ 200 mA

Sensitivity of the microphone capsules:

Microphone for wall-mounting: - 47 dB (0 dB = 1V/Pa a 1 kHz)

Station microphone: - 48 dB (0 dB = 1V/Pa a 1 kHz)

Frequency response (-3 dB): 270 ÷ 8000 Hz

Rated output power:

With internal 8-Ohm loudspeaker: 1 W

With external 8-Ohm loudspeaker: 1 W

With external 16-Ohm loudspeaker: 0,6 W

Microphone station:

Station microphone (mm): 200 x 158 x 81

Hole for flush-mounting a station (mm): 190 x 180 (maximum depth 72 mm)

Net weight of microphone station (kg): 1

Note:

It can be used with the LAX50 current amplifier.

CS1066 Basic system for open conferences

The CS1066 is effi cient and inexpensive. It does not need to be programmed and does not require an operator in order to function. It is a system for free discussion, in which the

Chairperson (Moderator) station has priority. It is suitable for conferences with a maximum attendance of 66 people apart from the Chairperson and the Secretary, if any. The cable for connecting the microphone stations is not included and must be purchased separately.

Central discussion unit: this has been created for managing small discussion systems without an operator. Its strong point is the versatility of the audio output connections, together with the separate and independent level controls for the input signals. It runs up to 66 Delegate Stations plus a Chairperson

Station, followed by a Secretary Station. It provides automatic internal level control of the signal from the units so as to prevent distortions if a high number of Delegates try to speak at the same time. The units are connected in a chain with three lines: two delegate lines for 33 stations each and one line for the

Chairperson and Secretary Stations.

B1060-S

Secretary microphone station: with the same equipment as the B1060-D delegate station. It cannot be switched off by the Chairman’s ‘priority’ control.

B1060-D

B1060-D Delegate microphone station enabling direct speech. It is equipped with a fi xed microphone, a built-in loudspeaker with individual level control and one jack for an earphone.

hall microphone

B1060 range

Microphone: Fixed, gooseneck, electret capsule,

length 400 mm

Cables: not included

Mounting: Table-top, fl ush-mounted

Size (l x a x p) (mm): 121 x 40-85 x 195

Weight (kg): 10,3

Hole for fl ush-mounting (l x p) (mm): 121 x 195 maximum,

maximum thickness of top: 30 mm

B1060-P

Chairman’s microphone station: identical to the

B1060-D delegate station with the addition of a

‘priority’ control that causes all the delegate’s microphones to be switched off.

1

Basic system for open conferences

33 deleg.

34 66 deleg.

CS1066 (example with)

Up to 66 Delegates

1 Chairperson

1 Secretary

- Conference hall amplifi cation

- Recording

- Conference hall microphone

and wireless microphone

Tape

Central unit

Chairperson Secretary wireless microphone

Amplifi er

Conference hall speaker units

15

S.p.A.

SOUND SYSTEM SPECIALIST

PASO S.p.A., certifi ed according to EN ISO 9001:2000, has design, system-engineering and industrial know-how accrued in over 70 years of activity and consolidated by constant research into innovation through technology.

Thanks to its wealth of technology, skill and experience, which has enabled the company to win the confi dence and appreciation of the main world markets – on which it is also present through its American Subsidiary PASO Sound Products Inc.

PASO S.p.A. owns the GELOSO intellectual property, trademarks and patents.

PASO is one of the few specialised companies able to boast its own integrated original design, industrialisation and manufacturing system for a full range of products, from the most complex and sophisticated systems and equipment down to the simplest accessories.

This new catalogue, “simply audio”, includes some totally innovative product lines. As well as a token of the Company’s constant commitment, it is intended as a useful tool for designing and creating sound amplifi cation systems for small and medium-sized applications.

PASO also offers complete audio solutions for sound-broadcasting systems applied to emergency services and for congress systems.

PMS2000 SYSTEM

Sound-broadcasting system

Increasingly often, and especially if they are complex and require high levels of safety and fl exibility, sound systems have to be integrated with sophisticated systems for managing and running diagnostic checks on the various different components, for monitoring the lines, the power supplies and the amplifi ers, for selecting the inputs and outputs fl exibly and for interfacing with external peripheral units. The PASO PMS2000 solution is just the thing for these and for even more demanding applications. It is an extremely versatile modular professional amplifi cation “system”, capable of complying with the most complex system specifi cations.

PMS2000-VES

PASO EN 60849 Certifi ed Sound-broadcasting system

Wherever the public are present in large numbers, it is essential to have a suitable soundbroadcasting system capable, when activated by the fi re-fi ghting service, of managing an emergency, enabling guided and controlled evacuation of the building. The current applicable European standard is EN 60849 (CEI 100-55). It defi nes specifi cally the characteristics of an electro-acoustic evacuation and emergency system in terms of design and installation so that it complies with the safety and reliability requisites

The PMS2000-VES sound-broadcasting system is PASO’s current answer to the features specifi ed in the legally applicable EN 60849 (CEI 100-55) standard.

Conference systems

The secret of a smoothly run and successful conference lies partly in the possibility of managing it properly, placing speakers in a logical order, regulating the timing of their contributions and how they are provided and requesting and receiving rapid and clear responses from the meeting. All this must be achieved with perfectly clear and intelligible sound messages. PASO conference systems can meet all these needs simply yet elegantly.

Simply Audio

SOUND-BROADCASTING

Simply Audio

SHORT CATALOGUE 2006 EN

SOUND SYSTEM SPECIALIST

Microphones

Hand-held microphone

new

new

Hand-held microphone

new

new

Table-top Microphone Bases new

new

Flat microphones

new

2 new

Microphone base with

new

Microphone base with

Microphone base

UHF receiver new

Wireless microphone station

new

Lavalier transmitter microphone (tie-clip) new

Hand-held transmitter microphone microphone

5000 range Mixer Ampliﬁ ers and Booster Units

Mixer Ampliﬁ ers 60 W - 120 W - 240 W

Booster units 120 W - 240 W

3

3300 range Mixer Ampliﬁ ers

Mixer Ampliﬁ er 60 W -

Mixer Ampliﬁ er 120 W

new

Mixer Ampliﬁ er 40 W

Mixer Ampliﬁ er 30 W

Mixers – Equalisers – Antilarsen

Graphic equaliser

4

6-input mixer Mic. + Line

Antilarsen

Compact systems for broadcasting voice and music

Ampliﬁ ed tuner-CD player with selection of 2 zone

Ampliﬁ ed tuner-cassette player with selection of 2 zones

Ampliﬁ ed tuner-CD player

Alarm signal / message generators and automatic volume adjustment

5

6

6-zone Control Units for voice/music broadcasts

P8036 6-zone voice/music control unit

1000 range Ampliﬁ cation Systems for Vehicles

Microphone for the 1000 range

Horn including dynamic unit

Supporting plate for horns, complete with elastic strap and hook

Ampliﬁ er

Ampliﬁ er

Ampliﬁ er with

cassette player

LAX range Current Ampliﬁ ers

new

Column 20 W

Column 30 W new

new

Column 40 W

Column 50 W new

Sound columns

Wooden Column 24 W

Sound projectors

7

Sound projectors

new

Waterproof sound projectors 20 W

Waterproof two-directional sound projectors 20 W

Horn loudspeakers with separate units new new new

8

Circular horn

(without driver)

60 W

Driver new

35 W