Product Line Card
IP
wireless
fiber optic
remote power
Product
Line Card
kbcnetworks.com
Version 0117
Fiber Optic Transmission
Products
Video Point-to-Point products and ASFOM products below
shown as Transmitters (T). Receivers also available.
Fiber ST connector versions shown, SC and FC connectors also available.
Video Point-to-Point Transmission (8-bit video shown, 10-bit also available)
Product Series
Desktop MM
Desktop SM
Chassis Card MM
Chassis Card SM
1 channel video
1 channel video, 1 simplex contact closure
1 channel video, return simplex data
1 ch video, ‘Up-the-Coax’ & 2 duplex contact closures
1 ch video, 1 ch bi-directional data or Pelco Coaxitron data
1 channel video with bi-direction data
1 channel video, bi-directional data
& bi-directional contact closure
4 channel video multiplexer
4 channel video, bi-directional data
8 channel video multiplexer
8 channel video multiplexer, bi-directional data
FDVA
FDVA1-IA1
FDVA1-DC1
FCHA1
FCHA1-DB1
FDVA1-DB1
FDVA1-DB1-IB1
FDVA1-M1T-MSA
FDVA1-IA1-M1T-MSA
FDVA1-DC1-M1T-MSA
FCHA1-M1T-WSA
FDVA1-S1T-MSA
FDVA1-IA1-S1T-MSA
FDVA1-DC1-S1T-MSA
FCHA1-S1T-WSA
FDVA1-M1T-BS
FDVA1-IA1-M1T-BS
FDVA1- DC1-M1T-BS
FCHA1-M1T-BS
FDVA1-S1T-BS
FDVA1-IA1-S1T-BS
FDVA1- DC1-S1T-BS
FCHA1-S1T-BS
FDVA1-DB1-M1T-MSA
FDVA1-DB1-IB1-M1T-MSA
FDVA1-DB1-S1T-MSA
FDVA1-DB1-IB1-S1T-MSA
FDVA1- DB1-M1T-BS
FDVA1-DB1-IB1-M1T-BS
FDVA1- DB1-S1T-BS
FDVA1-DB1-IB1-S1T-BS
FDVA4
FDVA4-DB1
FPVG8
FPVG8-DB1
FDVA4-M1T-WSA
FDVA4-DB1-M1T-WSA
FPVG8-M1T-WSA
FPVG8-DB1-MT
FDVA4-S1T-WSA
FDVA4-DB1-S1T-WSA
FPVG8-S1T-WSA
FPVG8-DB1-ST
FDVA4-M1T-BS
FDVA4-DB1-M1T-BS
FPVG8-M1T-BS
FPVG8-DB1-MT-C
FDVA4-S1T-BS
FDVA4-DB1-S1T-BS
FPVG8-S1T-BS
FPVG8-DB1-ST-C
The following are available in 1U/2U tray configurations
Product Series
MM
SM
Tray
16
16
32
32
FPVG16
FPVG16-DB1
FPVG32
FPVG32-DB1
FPVG16-MT-R
FPVG16-DB1-MT-R
FPVG32-MT-R
FPVG32-DB1-MT-R
FPVG16-ST-R
FPVG16-DB1-ST-R
FPVG32-ST-R
FPVG32-DB1-ST-R
1U
1U
2U
2U
Data
Product Series
Desktop MM
Desktop SM
Chassis Card MM
Chassis Card SM
1 channel data
FDDB1
FDDB1-M1T-MSA
FDDB1-S1T-MSA
FDDB1-M1T-BS
FDDB1-S1T-BS
ASFOM (Application Specific Fiber Optic Modem)
Product Series
Desktop MM
Desktop SM
Chassis Card MM
Chassis Card SM
channel video multiplexer
channel video, bi-directional data
channel video multiplexer
channel, video multiplexer, bi-directional data
ASFOM multi-interface, custom products: please choose the mix and number of signals from: analog video, analog audio, data, contact closure, telephone, Ethernet, USB, DVI & SDI.
ASFOM supports point-to-point, bus and redundant fiber solutions. From the millions of possible solutions, the following are examples of what you can specify:
FPAD1-ST-C
FPAA1-ST-C
FPED1-ST-C
FPID4-ST-C
FPIA8-ST-C
FPTD1-ST-C
Audio PtP transmission – 1 channel duplex
Audio PtP transmission – 1 channel simplex
E1 PtP transmission
Contact closure PtP transmission, 4 channels duplex
Contact closure PtP transmission, 8 channels simplex
Telephone PtP transmission
Bus transmission system
Redundant PtP or bus transmission system
ASFOM FPA
FPAD1-MT
FPAD1-ST
FPAD1-MT-C
ASFOM FPA
FPA A1-MT
FPA A1-ST
FPAA1-MT-C
ASFOM FPE
FPED1-MT
FPED1-ST
FPED1-MT-C
ASFOM FPI
FPID4-MT
FPID4-ST
FPID4-MT-C
ASFOM FPI
FPIA8-MT
FPIA8-ST
FPIA8-MT-C
ASFOM FPT
FPTD1-MT
FPTD1-ST
FPTD1-MT-C
Combine up to 16 wavelengths on a single fiber to create an add/drop bus.
Provide backup links for point-to-point and bus systems.
Chassis Card Cages
Product Series
3U, Single PSU,
120Vac Input
3U, Dual PSU,
120Vac Input
4U, Single PSU,
120Vac Input
4U, Dual PSU,
120Vac Input
19'' Chassis with integral PSU
FR3/FR4
FR3-AB
FR3-AB-RP
FR4-AB
FR4-AB-RP
Applications
Verticals
CCTV & surveillance
Security
Intelligent Transport Systems (ITS)
Telemetry & SCADA
Industrial control systems
Access control systems
Remote video, voice & data transmission
Building & site management
Secure transmission
Town & city center
Transportation
Critical national infrastructure
Power, utilities & petrochemical plants
Government agency & emergency services
Military systems
Homeland security & counter-terror
Remote data
Commercial, retail & residential
IP Transmission Products
Compact SM
Chassis Card MM
Media Converters — Industrial
Product Series
Compact MM
10/100 media converter—single fiber
10/100 media converter—dual fiber
10/100/1000 media converter—single fiber
10/100/1000 media converter—dual fiber
10/100/1000 media converter with SFP port
FTL
FTL
MCG1
MCG1
MCG1-P
FTL1-M1A-BS*
FTL1-S1A-MSA*
FTL1-M1A-MSA*
FTL1-M2-BS
FTL1-S2-MSA
FTL1-M2-MSA
MCG1-M1A-BS*
MCG1-S1A-MSA*
MCG1-M1A-MSA*
MCG1-M2-BS
MCG1-S2-MSA
MCG1-M2-MSA
MCG1-P2-MSA (dependent on SFP module—SFP modules listed below)
Chassis Card SM
FTL1-S1A-BS*
FTL1-S2-BS
MCG1-S1A-BS*
MCG1-S2-BS
*The first A in this part number denotes it is an ‘A’ end product. Pairs of single fiber media converters need an ‘A’ end and a ‘B’ end to operate. E.g. when ordering 2 single fiber, compact, multimode media converters
from the FTL range, you would require a FTL1-M1A-MSA and a FTL1-M1B-MSA.
PoE Media Converters — Industrial
Product Series
Wall-mount MM
Wall-mount SM
10/100 media converter with PoE—single fiber
10/100 media converter with PoE—dual fiber
10/100/1000 media converter with PoE—single fiber
10/100/1000 media converter with PoE – dual fiber
FTLS1
FTLS1
MCGS1
MCGS1
FTLS1-M1A-WSA*
FTLS1-M2-WSA
MCGS1-M1A-WSA*
MCGS1-M2-WSA
FTLS1-S1A-WSA*
FTLS1-S2-WSA
MCGS1-S1A-WSA*
MCGS1-S2-WSA
Media Converters — Commercial
Product Series
Compact MM
Compact SM
10/100 media converter—single fiber
10/100 media converter—dual fiber
10/100/1000 media converter—single fiber
10/100/1000 media converter—dual fiber
MCCL
MCCL
MCCG1
MCCG1
MCCL1-M1A-MSA*
MCCL1-M2-MSA
MCCG1-M1A-MSA*
MCCG1-M2-MSA
MCCL1-S1A-MSA*
MCCL1-S2-MSA
MCCG1-S1A-MSA*
MCCG1-S2-MSA
Industrial Ethernet Switches
Product Series
DIN Rail
Wall-mount
Unmanaged, 5 copper 10/100Mbps ports
Unmanaged, 8 copper 10/100Mbps ports
Managed, 6 copper 10/100Mbps & 3 SFP ports
ESUL5
ESUL8
ESML6-P3
ESUL5-DA
ESUL8-DCA
ESML6-P3-DA
ESUL5-WA
ESUL8-WCA
ESML6-P3-WA
*Also requires ‘B’ end
*The first A in this part number denotes it is an ‘A’
end product. Pairs of single fiber media converters
need an ‘A’ end and a ‘B’ end to operate. E.g.
when ordering 2 single fiber, compact, multimode
media converters from the MCCL1 range, you would
require a MCCL1-M1A-MSA and a MCCL1-M1B-MSA.
*Fiber ports shown as multimode (M). Singlemode
(S) is also available. Supplied with both DIN rail
and wall-mount fixings
Industrial Ethernet Switches with PoE
Product Series
DIN Rail/Wall-mount* Commercial-grade version
PoE Description
Lite Managed, 6-port Gigabit POE+
Unmanaged, 8 copper 10/100/1000Mbps ports
Self-managed, 4 copper 10/100/1000Mbps & 2 Gigabit SFP ports
Managed, 8 copper 10/100/1000Mbps & 2 Gigabit combo ports
Managed, 16 copper 10/100/1000Mbps & 2 Gigabit SFP ports
Managed, 24 copper 10/100/1000Mbps & 4 shared Gigabit SFP ports
ESUGS4
ESUG8P
ESSG4P-PG2
ESMGS8-C2
ESMGS16-P2
ESMGS24-P4
ESUGS4-EG1-P1
ESUG8P-D
ESSG4P-PG2-D
ESMGS8-C2-D
ESMGS16-P2-RAT
ESMGS24-P4-RAT
4 ports 802.3at LAN¹
IEEE802.3at, PoE+ on
IEEE802.3at, PoE+ on
IEEE802.3at, PoE+ on
IEEE802.3at, PoE+ on
IEEE802.3at, PoE+ on
ESMGS16-P2-RA
ESMGS24-P4-RA
*Supplied with both DIN rail and wall-mount fixings with the exception of the
ESMGS16-P2 and ESMGS24-P4 which are supplied as 1U rack units.
8 ports
4 ports
8 ports
16 ports
24 ports
¹with two uplink ports (1 Fiber SFP
and 1 copper gig port non-POE)
Industrial Power Supplies—for use with POE Ethernet switch range Product Series
DIN Rail Format
Standard power supply unit, 120W
Extended temperature range power supply unit, 120W
Standard power supply unit, 240W
Extended temperature range power supply unit, 240W
Standard power supply unit, 480W
Extended temperature range power supply unit, 480W
DR-120
SDR-120
DRP-240
SDR-240
DRP-480S
SDR-480
DR-120-48
SDR-120-48
DRP-240-48
SDR-240-48
DRP-480S-48
SDR-480-48
Industrial SFP Modules
Product Series
Multimode
Singlemode
Twisted pair
100Mbps 2 fiber
Gigabit 2 fiber
Gigabit 1 fiber (20km)
Gigabit 1 fiber (40km)
Gigabit 1 fiber (80km)
SFP
SFP
SFP
SFP
SFP
SFP
SFP-MM2
SFP-GM2
SFP-MS2-B
SFPV-GS2-A
SFP-GS1A-A
SFP-GS1A-B
SFP-GS1A-C
Extended Ethernet Kits
(IP Transmission & Power over Coax, UTP & 2 wire cabling)
Product Series
1 Camera
2 Cameras
3 Cameras
4 Cameras
Ethernet over coax transmission kits
Ethernet over UTP/Two-Wire transmission kits
EE2CL
EE2CL
EE2CL-1KT
EE2CL-1KT-TW
EE2CL-2KT
EE2CL-2KT-TW
EE2CL-3KT
EE2CL-3KT-TW
EE2CL-4KT
EE2CL-4KT-TW
Copper
SFP-T
*Coax kits include 2-5 EE2CL units / 1 x 48Vdc, 1.25A power supply / + BNC Splitter for 2-4 camera kits *UTP Kits include 2-5 EE2CL units / 1 x 48Vdc, 1.25A power
supply / BNC Splitter for 2-4 camera kits / + BNC to 2-wire adapters
ThruLink enables secure transmission of video, voice and data over public networks. Units provide encryption up to 256bit and are available in Standard, Standard Plus,
High Capacity and High Capacity Plus variants. The standard and standard plus units are provided in a wall-mount configuration and have the option for embedded 3G/4G/LTE
for mobile applications. The High Capacity and High Capacity Plus units are supplied as a 1U, rack-mount unit.
ThruLink™ Secure Hardware VPN
Standard Unit
Embedded 3G/4G/LTE Version
Throughput*
Standard capacity*
Standard capacity plus*
High capacity
High capacity plus
THLK-SC-OO-AN-WA
THLK-SP-OO-AN-WA
THLK-H3-RA
THLK-H4-RA
THLK-SC-CO-AN-WA
THLK-SP-CO-AN-WA
15Mbps
30Mbps
100Mbps
200Mbps
*Please note, actual system throughput
depends on network availability
Wireless Transmission Products
KBC Networks is proud to introduce WES3 — our 3rd generation Wireless Ethernet System product range. WES3 comes with a new compact industrial design, new lower cost and
enhanced firmware that gives users greater convenience and flexibility. Create a simple point-to-point wireless bridge or a complex point-to-multipoint wireless network all with
one device and one firmware. Each WES3 unit can be configured as a client, single point host or multi-point host. The new and improved WES3 series will replace the WESII series
but will still be compatible with all WESII versions.
For wireless applications that require redundancy, the MESH2HT series will now replace the MESHII series. The MESH2HT series offers greater flexibility for wireless MESH
applications with more than double the throughput capability of the MESHII series. For more information on all KBC Networks’ wireless products visit www.kbcnetworks.com
or email [email protected] for no-cost wireless application designs and pre-sales support.
Point-to-Point and Point-to-Multipoint
Wireless Point-to-Point Kits (Pre-programmed by
KBC Networks for plug and play operation)
Standard Throughput High Throughput Kit, High Throughput Kit,
Description
Kit, Up to 99Mbps
Up to 230 Mbps+
650 Mbps
Point-to-point kit (HTG)
Point-to-point kit with 8 port PoE switch
and PSU (HTG)
Point-to-point kit
Point-to-point kit with encoder & decoder
Point-to-point kit, 5GHz, with PoE
Point-to-point kit with 5 port PoE switch and PSU
Point-to-point kit with 8 port PoE switch and PSU
Point-to-point kit, 4.9GHz
WES3HTG-KT
WES3HTG-KT-P8
WES3-KT
WES3-KT-ED
WES3-KT-POE
WES3-KT-P5
WES3-KT-P8
WES2HT-KT
WES2HT-KT-P8
WES2HT-KT-49
2 x 5GHz HTG point-to-point units
2 x 5GHz HTG point-to-point units + ESUG8P-D +
DRP-240-48
2 x 5GHz point-to-point units
2 x 5GHz point-to-point units + KBC encoder & decoder
2 x 5GHz point-to-point units with PoE radios
2 x 5GHz point-to-point units + ESUL5P-D + DR-120-48
2 x 5GHz point-to-point units + ESUG8P-D + DRP-240-48
2 x 4.9GHz point-to-point units
The WES3-KT-POE kit includes mounting hardware. All other kits include mounting hardware, 2 x power injector modules and 2 x 24Vdc PSUs.
Extended temperature PoE PSUs are available for the 5 and 8 port PoE switches. Please add ‘T’ to the end of the part number, e.g. WES3-KT-P8T.
WES3HTG, 5GHz, High Throughput, up to 650Mbps
Product Series
17dBi Patch Antenna 9dBi Patch Antenna
5dBi Omni-Directional Antenna
WES3HTG, Point to point host/point to multipoint host/client unit
WES3HTG
WES3HTG-AX-CA
WES3HTG-AX-BA
WES3HTG-AX-AA
WES3, 5GHz, Standard Throughput, Up to 99Mbps
Product Series
17dBi Patch Antenna
9dBi Patch Antenna
5dBi Omni-directional Antenna
WES3-AX-CA
WES3-AX-CF
WES3-AX-BA
WES3-AX-BF
WES3-AX-AA
WES3-AX-AF
Point-to-point host/point-to-multipoint host/client unit
WES3
Point-to-point host/point-to-multipoint host/client unit, PoE version WES3
WES3 is supplied as one unit. The firmware allows the user to select between point-to-point host, point-to-multipoint host and client
WES2HT, 5GHz, High Throughput, Up to 230Mbps+
Product Series
17dBi Patch Antenna 9dBi Patch Antenna
WES2HT, 5GHz, point-to-point host
WES2HT, 5GHz, point-to-multipoint host
WES2HT, 5GHz client
WES2HT
WES2HT
WES2HT
WES2HT-AA-CA
WES2HT, 4.9GHz Public Safety Band, High Throughput,
Up to 230 Mbps+
Product Series
17dBi Patch Antenna 9dBi Patch Antenna
WES2HT, 4.9GHz, point-to-point host
WES2HT, 4.9GHz, point-to-multipoint host
WES2HT, 4.9GHz client
WES2HT
WES2HT
WES2HT
WES2HT-BA-CA
MESH2HT, 5GHz, High Throughput, Up to 230Mbps+
WES2HT-AC-CA
WES2HT-AA-BA
WES2HT-AB-BA
WES2HT-AC-BA
5dBi Omni-Directional Antenna
WES2HT-AA-AA
WES2HT-AB-AA
WES2HT-AC-AA
5dBi Omni-Directional Antenna
WES2HT-BC-CA
WES2HT-BA-BA
WES2HT-BB-BA
WES2HT-BC-BA
WES2HT-BA-AA
WES2HT-BB-AA
WES2HT-BC-AA
Product Series
Radio 2=5GHz
Radio 2=4.9GHz
Radio 2=2.4/5GHz
MESH2HT, PoE & non-PoE, radio 1 = 5GHz
MESH2HT, PoE & non-PoE, radio 1 = 4.9GHz
MESH2HT, PoE & non-PoE, radio 1 = 2.4/5GHz
MESH2HT
MESH2HT
MESH2HT-AA-OA
MESH2HT-AB-OA
MESH2HT-BB-OA
MESH2HT-AC-OA
MESH2HT-BC-OA
MESH2HT-CC-OA
Additional Antennas
Product Series
5GHz directional, 17dBi patch antenna
5GHz omnidirectional, 13dBi antenna
PAT5M
OD5M13
Mesh
Not sure which KBC
wireless antennas to select
for your application?
No problem. We have US based sales and technical support representatives with
25+ years of wireless CCTV experience available to assist you. Contact us today.
Phone: +1 949 297 4930
Toll Free: +1 888 366 4276
Fax: +1 949 297 4933
[email protected]
kbcnetworks.com
Remote Power and
Transmission Products
PoE Power Kits
The SPB series wireless PoE kits are designed for remote camera applications to power IP cameras where power is available for IP video transmission. The kits convert high
voltage (100Vac - 240Vac) power to low voltage PoE power andare designed to make installation straightforward. 4 kits are available for 1 or up to 4 cameras.
The 1 IP camera kits include a powder coated cast aluminium NEMA 4X-IP65 rated, 254mm x 203.2mm 76mm /10” x 8” x 3”, enclosure with converter and injectors preconnected inside. Included is a wall / pole-mount unit bracket with U bolts that will fit a 38mm / 1.5” pole.
The 4 IP camera kit includes a powder coated steel NEMA 4x-IP65 rated 279mm x 279mm 102mm /11” x 11” x 4”, enclosure with converter,injector and rugged, temperature
rated PoE switch pre-connected inside. Also included is a wall / pole-mount bracket with strut clamps for a 51mm / 2” pole.
Part Code
Output for Camera (Number/Type)
KBC-SPB-1AF-24
KBC-SPB-1AT-24
KBC-SPB-24VAC-24
KBC-SPB-24VAC-24HP
KBC-SPB-4AF-24
1
1
1
1
1-4
KBC-SPB-4AF-48
1-4
KBC-SPB-24-24
KBC-SPB-48-48
0
0
IEEE802.3af 15W
IEEE802.3at 30W
24VAC 1.6A
24VAC 4A
IEEE802.3af 15W (x4)
IEEE802.3at 30W (x2)
IEEE802.3af 15W (x4)
IEEE802.3at 30W (x2)
Camera Type
Output for Antenna (Number/Type)
Fixed
IP PTZ
IP PTZ
IP PTZ
Fixed
IP PTZ
Fixed
IP PTZ
N/A
N/A
1
1
1
1
1
24VDC
24VDC
24VDC
24VDC
24VDC
1
48VDC for WES3-AX-*F series & all HT/HTG models
for
for
for
for
for
WES3-AX-*A series
WES3-AX-*A series
WES3-AX-*A series
WES3-AX-*A series
WES3-AX-*A series
wireless
wireless
wireless
wireless
wireless
antennas
antennas
antennas
antennas
antennas
1-2 Designed for Relay Application (2) 24vdc antennas
1-2 Designed for Relay Application (2) 48vdc 802.3af PoE input antenna
Solar Power Kits
The solar kits include pole-mount solar panels; a lockable, aluminum, NEMA 4X-IP65 rated enclosure with pole-mount; PWM or MPPT charge controller with breakers; terminal blocks;
DIN rail and cabling. To help with kit selection, please refer to the map and table on the KBC website.
Solar Array
AL2 Series
AL5 Series
100W, 3.5-14W load
150W, 5-20W load
200W, 7-27W load
250W, 8-35W load
300W, 10-45W load
500W, 16-70W load
600W, 20-90W load
1200W, 40-180W load
KBC-AL2-100W
KBC-AL2-150W
KBC-AL2-200W
KBC-AL2-250W
KBC-AL2-300W
KBC-AL2-500W
KBC-AL2-600W
KBC-AL5-100W
KBC-AL5-150W
KBC-AL5-200W
KBC-AL5-250W
KBC-AL5-300W
KBC-AL5-500W
KBC-AL5-600W
KBC-AL5-1200W
Wind Turbines
Wind Turbines
Part Number
450W Turbine
KBC-VWT-450-24
Power Accessories
PoE Injectors
Power Converters
Part Number
Power Input
Power Output
Part Number
Power Input
Power Output
KBC-VE-DC/DC-18
KBC-VE-DC/DC-24
KBC-VE-DC/DC-48M
KBC-VE-DC/DC-1248P
KBC-VE-DC/DC-2448P
KBC-VE-DC/DC-2456P-70W
9-36Vdc
9-36Vdc
9-36Vdc
10-36Vdc
18-36Vdc
18-36Vdc
18v PoE
24v PoE
IEEE 802.3af
IEEE 802.3at (35w)
IEEE 802.3at (35w)
IEEE 802.3at (70w)
KBC-CV-24DC12DC
KBC-CV-24DC12DC5A
KBC-CV-12DC24VAC
KBC-CV-24DC24AC
KBC-CV-24DC24AC-100W
18-32Vdc
24Vdc
12Vdc
24Vdc
24Vdc
12Vdc (15w)
12Vdc (60w)
24Vac (40w)
24Vav (40w)
24Vac (100w)
5 Port Industrial PoE Switch for KBC Remote Power Products
Part Number
Power input 12-36Vdc / 4 IEEE 802.3af/at copper ports + 1 uplink port
KBC-VE-DINPOE5
Uninterruptible Power Supplies (Outdoor)
Uninterruptible PSUs
12V System, 200Ah,
Powder coated metal
24V System, 200Ah,
Powder coated metal
12V System, 500Ah (2x250Ah)
Powder coated metal
24V System, 500Ah (2x250Ah)
Powder coated metal
48V System, 500Ah (2x250Ah)
Powder coated metal
200/500Ah, 12/24V UPS Kits
KBC-UAL2-12
KBC-UAL2-24
KBC-UAL5-12
KBC-UAL5-24
KBC-UAL5-48
Mobile Surveillance System
Mobile Surveillance Systems are custom-built solutions for temporary site monitoring. Kits include a base unit, a removable head unit; 100W solar panel; charge controller; 12Vdc to
PoE power converter with room for up to 3 x 100Ah batteries (purchased separately). Please contact KBC Networks for accessories and transmission options.
Mobile Surveillance System
Kit Series
Custom-built surveillance kit
MSS-KT
IP
wireless
fiber optic
remote power
Integrity
More Products
Maintaining close, individual relationships with our
customers and partners is our top priority. Everything
we do as a company—and as individuals—is handled with
complete integrity and respect.
We’ve included our major product groups in this brochure.
For information on our complete product range please
visit www.kbcnetworks.com or call your local representative.
Service
Superior service and support is a critical component
of our business. We believe that successful network
and system performance rely on accurate design and
correct installation, so our technical and sales teams
provide product support throughout the lifecycle of
every project. Please contact us for customised
pre-sales and technical support.
Quality
Reliability and high performance are at the core of our
design, engineering and manufacturing processes. KBC is
proud to offer products and services that go above and
beyond recognized international standards.
Americas Office
KBC Networks
15 Brookline
Aliso Viejo
CA 92656
USA
Phone: +1 949 297 4930
Toll Free: +1 888 366 4276
Fax: +1 949 297 4933
[email protected]
EMEA Office
(Europe, Middle East
& Africa)
KBC Networks
The Nucleus
Brunel Way, Dartford,
Kent, DA1 5GA, UK
Phone: +44(0)1322 312090
[email protected]
www.kbcnetworks.com
Better Installation
We spend time thinking about our products so you don’t
have to. KBC products are designed for straightforward
set-up; simple analysis and minimal maintenance.
Greater Performance
Our products are built to perform in commercial
and industrial environments. Our industrial ranges
feature extended operating temperatures and
industrially-hardened casings to withstand
temperature extremes and the rigours of industrial
and outdoor environments.
APAC Office
KBC Networks
Phone: +65 9747 5123
[email protected]
Due to ongoing technological
improvements, product specifications
are subject to change without notice.
KBC Networks is not liable for any
errors, omissions or changes of any
description of the goods contained
herein. This information is for the sole
purpose of identifying the products
and product ranges, and KBC makes
no warranty that the products conform
to any description contained herein.
Do not rely solely on any
representations, statements or
assertions concerning these products
contained herein.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement