Brochure - Adaptocare

Brochure - Adaptocare

Adaptocare is a leader in the design and manufacture of special needs shower trays and enclosures which we distribute throughout the

UK, along with a unique range of products that enable the user to enjoy independence when showering, bathing or toileting.

We believe our first responsibility is to develop products that meet the needs of our clients in performance, quality and cost. To maintain this commitment we invest in our personnel training, research & development, and the most efficient manufacturing technology available.

Service is an essential part of Adaptocare’s policy and our skilled area managers will work alongside you to develop the best solution for your project and provide complimentary site surveys supported by scale plans with 3D drawings. A service we proudly introduced to the industry 10 years ago.

As a distributor of Clos-o-mats, Whale pumps, powered baths and support systems we offer our clients an unrivalled package of quality products, technical support and service.

We work in partnership with professionals such as occupational therapists, architects, housing associations and contractors. By listening to these professionals and with our years of experience working on projects for hospitals, care homes, new builds, renovations and private users, we have created an impressive product range that has established our reputation as the leading company of our type in Scotland.

We thank you for considering Adaptocare products and look forward to working with you.

Complimentary site survey

As part of our service, we will happily view and discuss any proposed adaptation to help ensure you get the best solution for the room you are adapting.

Ordering

There are a number ways you can order goods or request a quotation:

Tel: 0141 550 4177

Fax: 0141 554 4171

E-mail: [email protected]

Web: www.adaptocare.co.uk

Technical help

Our installation instructions are available to download from our website, or you can call our technical team on 0141 550 4177 from

8am-4:30pm (Mon-Fri).

Manufactured in the UK

As we manufacture and assemble in-house we have complete control over quality and availability. Most products are available from stock, and special configurations can be turned around in 1-2 days.

Contents

Level Access

The Torridon

The Fyne

The Ness

Low Access

The Ossian

The Etive

The Thom

The Madden

The Coulter

The Rannoch

Wet Floors

Flowaway

Flowaway 22

Above Floor Waste

The Tay

6

8

9

12

13

14

15

16

17

19

20

21

Shower Doors

Carer Screens

22

24

Urban Chic

Shower Rails & Curtains

25

26

Complimentary Site Survey 28

3D Design

Shower Toilet Cubicle

Clos-O-Mat

Baths

Shower Seats

Support Systems

Pumped Drainage

Waste Systems

36

36

38

40

29

30

32

34

Electric Showers

Ramps

Plinths

Top Tips

Lifetime Guarantee

Manufactured in the UK

Location

Shower Tray Index

Door Options Index

44

44

45

46

48

41

42

42

43

Terms & Conditions

50

3

Lifetime guarantee

We now offer a lifetime guarantee on our trays and enclosures, which covers them in the unlikely event of a manufacturing fault.

Free UK delivery

We provide a free delivery service for all UK mainland orders over the value of £500. Orders under the value of £500 will incur our standard carriage charge.

4

Level Access

The Torridon 6 The Fyne 8 The Ness 9

Our level access range of shower trays are, as the name suggests, set into the floor to provide level access for wheelchair and ambulant users. To instil confidence and safety, our trays feature a slip-resistant tread pattern which is kind on sensitive feet.

These trays have been independently tested to withstand loads in excess of

100st (630kg), weights well in excess of everyday use. The level access range, like all our shower trays, comes with our fully transferable lifetime guarantee.

All our level access products are made inhouse using our environmentally-friendly, closed mould injection system from 95% recyclable, glass reinforced plastic. These trays combine lightness with great rigidity and incredible strength.

The self-supporting structure of these trays is designed to minimise the amount of bedding material required. The slim profile & flat base design, simplifies the installation process as floor joists do not need to be cut.

Each tray comes supplied with a

STW5-R waste trap as standard, and other waste systems are available to suit specific installations (see page 40).

5

6

The

®

The Torridon is our range of Rolling

Access shower trays, designed to offer barrier-free level access. Available in 5 sizes.

As with all our shower trays, the Torridon features a slipresistant tread pattern which is kind on sensitive feet.

1 ‘Slot and Bond’ System

Our patented slot & bond system has been specifically designed to interface the slip resistant flooring with the

Torridon®. This unique innovation provides a maintenance free join without compromising access to the tray.

2 Rolling Access

With no lip and no bump, small wheeled shower chairs can glide smoothly from the floor to the Torridon® tray and back again without encountering any obstacles.

3 Timber Floor Installation

The Torridon provides the ideal level access solution without having to alter the floor joists. Dwanging & sheeting between the joists is recommended to provide a solid platform for the tray. The edge of the tray sits against the floorboards and ply sheeting, and vinyl flooring is laid over the top of the ply and fed into the Slot & Bond aluminium extrusion, holding the vinyl captive.

4 Solid Floor Installation

The Torridon tray can also be installed into solid floors, with only a minimal amount of screed or concrete to be excavated.

5 Floating Floor Solution

The Torridon® is designed to sit on top of floor joists. In most floating floor scenarios the floor beams are at least 70mm deep.

Our optional shallow waste trap (as illustrated, see page 40) has a below tray depth of 50mm, making gravity drainage possible where space below the floor is limited.

1

3

5

2

4

Tray Waste Positions

The shower doors sit inside the outer perimeter of the

Torridon by 65mm to accommodate the slot

& bond extrusion.

7

KEY FEATURES

• Unique slot & bond system holds vinyl flooring captive to create barrier-free Rolling Access

• Attachable aluminium upstands accommodate both tiles and wall panels

• The Torridon 1765mm trays can be cut to allow the trays to be varied in length to suit alcove 3-wall installations

• Pre-drilled holes along the tray perimeter allow the

Torridon shower tray to be anchored to the floor

• A proven slip resistant tread pattern which is kind on sensitive feet

AVAILABLE SIZES

1000 x 1000 mm

1265 x 765 mm

1265 x 865 mm

1765 x 765 mm*

1765 x 865 mm*

Available in left or right hand

*can be cut for 3-wall installations

FLOORING

Timber

Floating Floor

Concrete

See page 48 for door options.

8

Tray Waste Positions

Tiling Lip

Joists

Dwangs &

Sheeting

Vinyl

Flooring

Ply

Sheeting

Floorboards

The

®

The Fyne is a level access tray with a flat base design that cuts installation time to a minimum and also reduces the amount of bedding material required.

It is one of the strongest trays on the market, and has been independently tested to withstand a weight of 630kg. Available in two width sizes, 710mm & 800mm wide.

Self-Supporting

The Fyne is self-supporting with the outside flanges of the tray resting neatly on the floorboards. Only minimal bedding material is required to bond the tray to the sheeting platform.

KEY FEATURES

• Unique flat base design cuts installation time to a minimum

• Built in tiling upstand accommodates both tiles and wall panels

• Tray flanges sit neatly on floorboards providing level access

• A proven slip resistant tread pattern which is kind on sensitive feet

AVAILABLE SIZES

1220 x 710 mm

1220 x 800 mm

Available in left or right hand

FLOORING

Timber

Floating Floor

Concrete

See page 48 for door options.

Tray Waste Positions

The

®

The Ness is a full-length level access tray with a selfsupporting body which allows for simple installation.

It also features a cut-to-length drying area to suit alcove (3-wall) installations. The

Ness is available in two widths, 710mm &

800mm wide.

9

3-wall Installations

The Ness can easily be cut to varied lengths to suit different alcove installations. An attachable third upstand is supplied with the tray to provide a water resistant finish on all sides.

KEY FEATURES

• Cut-to-length section to suit variable lengths in 3-wall installations

• Built in tiling upstand accommodates both tiles and wall panels

• Unqiue flat base design cuts installation time to a minimum

• A proven slip resistant tread pattern which is kind on sensitive feet

AVAILABLE SIZES

1850 x 710 mm

1850 x 800 mm

Available in left or right hand

FLOORING

Timber

Floating Floor

Concrete

See page 48 for door options.

10

Low Access

An extensive range of versatile trays that can be floor mounted to provide walk-in access with a 35mm step, or can be set into the floor to offer level access. We offer a range of ramps designed to provide wheelchair access to floor-mounted Low Access shower trays.

The range comes in a wide variety of sizes designed to suit any bathroom layout. As with all Adaptocare trays, our Low Access range is covered by our fully transferable lifetime guarantee and have been tested to withstand weights of over 100 stone

(630kg), weights well beyond that of normal everyday use. To instil confidence and safety in users, our trays feature a slipresistant tread pattern which is kind on sensitive feet.

The versatile trays are unhanded and come supplied with attachable aluminium tiling upstands to suit left hand, right hand &

3-wall installations. The trays have 6mm offset bases which make them easy to level on uneven floors. Each tray also comes supplied with a STW5-R waste trap as standard, and other waste systems are available to suit specific installations (see page 40).

The Ossian

The Madden

12

16

The Etive

The Coulter

14 The Thom

17 The Rannoch

15

18

11

Floor mounted installation

These trays can be installed on top of concrete or timber floors, to provide a low step access. When installed the tray would sit 35mm above the floor level, which leaves a step height of approximately 26mm once the 6mm ply sheeting and 3mm slip resistant vinyl flooring has been fitted.

35mm Above

Floor Level

Vinyl Flooring

& 6mm Ply

26mm Step

Recessed solid floor installation

These trays are equally suitable for being set into the floor. For recessing the trays into solid floors, the concrete should be excavated out by approximately 26mm. This will provide level access to the tray once the ply sheeting and vinyl has been fitted.

Recessed timber floor installation*

For recessing into timber floors the tray is laid on top of the floor joists providing an approximate 8mm step.

The edge of the tray sits against the floorboards, ply sheeting and vinyl flooring. Dwanging and sheeting between the joists is recommended to give the tray a solid platform.

Vinyl Flooring

& 6mm Ply

Vinyl Flooring

& 6mm Ply

Level Access

8mm

Step

35mm Tray

Depth

Excavate

26mm

35mm Tray

Depth

18mm

Floorboards

*

We do not recommend cutting or notching floor joists as they play a vital part in the structural integrity of a building. If level access is required, we would recommend a tray specifically designed for this purpose, such as the Torridon, Fyne or

Ness (see Level Access page 5), or a wet floor former (see Flowaway page 19).

12

The

®

The new addition to our Low

Access range, the Ossian, has a step profile of only 35mm when floor mounted.

The tray is self supporting to facilitate ease of installation and its 6mm recessed base makes it easy to level on uneven floors.

Versatile

The Ossian can be used in various floor setups.

It is easy to install on top of concrete or timber flooring, providing a low step access at a height of

35mm. It can also be set into the floor to provide level access.

KEY FEATURES

• Attachable aluminium upstands accommodate both tiles and wall panels

• Graded ramps available, straight and corner (see page 42), offers wheelchair access

• Easy to level - 6mm offset base accommodates uneven floors

• A proven slip resistant tread pattern which is kind on sensitive feet

AVAILABLE SIZES

1200 x 650 mm 1300 x 650 mm

1200 x 700 mm

1200 x 760 mm

1300 x 700 mm

1400 x 700 mm

1500 x 710 mm

FLOORING

Timber

Floating Floor

Concrete

See page 48 for door options.

Tray Waste Positions

Extensive range

The Ossian is available in an extensive range of sizes. This variety allows the maximum available space to be utilised, without having to use a cut-to- length tray.

The

®

The Etive is the new bath replacement-sized addition to our

Low Access range.

It is designed to be cut to suit the required length in alcove (3-wall) installations. The tray is self-supporting to facilitate ease of installation and its 6mm recessed base makes it easy to level on uneven floors. The Etive can also be set into the floor to provide level access.

Adaptable

Our Etive trays can be used in various situations. At 1700mm long they are the ideal size for replacing baths in 3-wall installations.

They can also be easily cut to length to suit specific alcove sizes, or are just as suitable to install in standard 2-wall installations.

KEY FEATURES

• Cut-to-length section to suit variable lengths in alcove (3-wall) installations

• Equally suitable for use in 2-wall installations

• Centre-back waste outlet, 300mm from back edge of the tray

• Self supporting structural design - minimises bedding material

• A proven slip resistant tread pattern which is kind on sensitive feet

AVAILABLE SIZES

1700 x 700 mm

1700 x 760 mm

FLOORING

Timber

Floating Floor

Concrete

See page 48 for door options.

Tray Waste Positions

13

14

The

®

The Thom is a self-supporting tray with a step profile of 35mm when floor mounted, that can also be set into the floor to provide level access.

The trays 6mm recessed base makes it easy to level on uneven floors.

Central Waste

Available in 2 sizes, the waste position on the

1200 x 700mm tray is located in the centre providing excellent drainage. The waste position on the 1200 x 800mm tray is offset offering the option to rotate the tray in the unlikely event that a joist fouls the waste.

KEY FEATURES

• Low level 35mm profile offers ease of access

• Waste outlet located in centre of tray

• A proven slip resistant tread pattern which is kind on sensitive feet

• Attachable aluminium upstands accommodate both tiles and wall panels

• Easy to level - 6mm offset base makes short work of uneven floors

AVAILABLE SIZES

1200 x 700 mm

1200 x 800 mm

FLOORING

Timber

Floating Floor

Concrete

See page 48 for door options.

Tray Waste Positions

The

®

All the benefits of the Thom but with cut-to-length capability.

Also available with a 35mm ramp for wheelchair access when set on top of the floor.

Cut-to-length

The Madden tray features a cut-to-length drying area that enables the tray to be easily cut down from 1850mm to the required length in alcove (3-wall) installations.

KEY FEATURES

• Cut-to-length section to suit variable lengths in alcove (3-wall) installations

• Ideal for replacing baths, making use of the maximum available space

• Central waste position, similar to waste position on the Thom

• A proven slip resistant tread pattern which is kind on sensitive feet

AVAILABLE SIZES

1850 x 700 mm

FLOORING

Timber

Floating Floor

Concrete

See page 48 for door options.

Tray Waste Positions

15

16

The

®

Self-supporting low access tray similar to the Thom, but with a waste position that is offset

90mm on both axis, to guarantee a successful waste connection for those awkward installations.

Offset Waste

The Coulter’s waste is offset 90mm on both axis from the centre of the tray, so that the tray can be rotated to ensure the waste trap is not impeded by any floor joists.

KEY FEATURES

• Low level 35mm profile offers ease of access

• Offset-centre waste allows tray to be rotated to avoid joists

• Attachable aluminium upstands accommodate both tiles and wall panels

• A proven slip resistant tread pattern which is kind on sensitive feet

Tray Waste Positions

AVAILABLE SIZES

1200 x 700 mm

FLOORING

Timber

Floating Floor

Concrete

See page 48 for door options.

The

®

A square tray with a corner waste outlet and a depth of

35mm, it is ideal for floor mounting to provide Low

Access or recessed into the floor to offer Level Access.

Square

The square shape of the Rannoch makes it equally suitable to install in any corner of the room. Like all our Low Access trays, the Rannoch can be installed on top of the floor, or can be set into concrete or timber flooring to provide level access.

KEY FEATURES

• Low level 35mm profile square tray offers ease of access

• Corner waste outlet, 90mm from tray edge

• A proven slip resistant tread pattern which is kind on sensitive feet

Tray Waste Positions

AVAILABLE SIZES

900 x 900 mm

FLOORING

Timber

Floating Floor

Concrete

See page 48 for door options.

17

18

Flowaway®

The Flowaway wet floor former has been designed to provide an efficient, economic and safe solution for one of the most challenging areas of showering.

• Carer and client can access and exit the showering area with confidence

• Provides turning facility for wheelchair users

• Eliminates ponding as the showering area has excellent drainage

• Removes the task of forming a graded floor to improve ease and speed of installation

• Unique 6mm rebate allows plywood to sit on the Flowaway for a seamless finish to the vinyl flooring

• Can help the contractor provide an improved floor in refurbishment projects

• Supplied with TSG1WH-STW1R as standard (see page 40 for other gully traps available)

• Pre-drilled holes allow the Flowaway to be anchored to the floor

• Easy to install gully holds the vinyl captive

• Flowaway base is 24mm thick: 6mm ply rebate + 18mm below ply depth

Tray Waste Positions

FA1

19

FA3

AVAILABLE SIZES

FA1: 1335 x 840 mm

FA2: 1000 x 1000 mm

FA3: 1540 x 820 mm

FA5: 1200 x 1200 mm

FA900: 900 x 900 mm

FLOORING

Timber

Floating Floor

Concrete

See page 48 for door options.

FA2, FA5 & FA900

20 21

The Flowaway 22 is a wet floor former designed to be installed flush into 22mm chipboard flooring.

• No ply rebate, designed for installing directly into chipboard flooring

• Flowaway 22 wet floor bases are 22mm thick

• Each of the bases has an offset waste allowing it to be rotated in the unlikely event that a joist fouls the waste

• Supplied with TSG1WH-STW1R as standard

(see page 40 for other gully traps available)

• Feature all the other benefits of standard

Flowaway wet floor formers

AVAILABLE SIZES

FA22: 1300 x 800 mm

FA23: 1135 x 700 mm

FA1500: 1500 x 1500 mm

FLOORING

Timber

Floating Floor

Concrete

See page 48 for door options.

Waste Outlet Positions

FA1500:

For Bariatric Use

The 1500 x 1500mm Flowaway 22 has been designed specifically for bariatric use and is ideal for use in nursing homes and hospitals.

AVAILABLE SIZES

1200 x 700 mm

Available in left or right hand

TRSH10

A running waste trap comes supplied as standard with the Tay.

The Tay is the ideal solution for concrete or screeded floors, where excavation is not possible. The

Tay, like all our shower trays, comes with our fully transferable lifetime guarantee.

The Tay®

The Tay sits on top of the floor and has an above floor drainage system with a 1½” side outlet. The

65mm step provides walk-in access and can be combined with a ramp for easier access. The waste outlet of the Tay lies above the floor level, allowing the tray to be installed on concrete without the requirement to excavate the floor. (A shower waste pump is recommended where running gravity drainage is not available, see page 38)

• 65mm profile offers step-in access

• Above floor waste outlet can be used with a shower waste pump (see page 38)

• Easy to level - 6mm offset base makes short work of uneven floors

• Graded straight ramp (see page 42) available

• Self supporting structural design - minimises bedding material

• Supplied with TRSH10 as standard

• A proven slip resistant tread pattern which is kind on sensitive feet

FLOORING

Timber

Floating Floor 

Concrete

See page 48 for door options.

22

Our shower screens have been specially designed to meet the needs of both the carers and end users. We construct doors to fit most situations and produce specific bespoke doors to meet your requirements.

Our doors are supplied at a height of 750mm, the industry standard for carer-assisted half-height shower doors. However, upon request we can manufacture half-height doors to a height of up to 900mm. Fixed panels can be manufactured to any height up to 2000mm.

The ultra lightweight doors feature clean aesthetic lines that fit comfortably in any home. Our door assemblies come complete with a shower curtain and curtain rail (see page 26).

See page 48 for our list of standard door options.

Safety Glazing

Impact resistant PETG safety glazing is shatterproof, ensuring safety and peaceof-mind for end user.

Compensators

Compensators have a generous allowance for out-of-square walls, and can be easily adjusted.

(compensator cap removed to illustrate tolerance.)

Grab Post

Vertical support post offers good grip and stability for users when entering and exiting the showering area.

Handles & Latches

User-friendly handle (see left) is easy to operate for opening & closing doors.

Pop-up latch (see below) keeps doors closed & watertight.

Gasket Seals

Doors feature both gasket and magnet seals between the doors, creating an impressive water deflection system.

Rise & Fall Hinges

Rotating the base of the ‘Rise and fall’ door hinges by 90° causes the water to flow back into the shower tray instead of escaping out into the room.

23

Snap Fit Caps

Our parts are precision engineered to ensure quality, ease of installation and endurance. These snap fit components do not require adhesives, eradicating ongoing maintenance issues.

Bespoke Doors

To ensure you get the solution you are looking for, we can arrange a complimentary site survey and provide you with CAD drawings.

We will take accurate dimensions and tile-to-tile sizes so that the doors can be made-to-measure.

As well as our standard door options

(see page 48), we can provide special configurations to suit specific jobs. We can discuss any specific requirements you may have, to ensure you get the doors to meet your needs.

Floor Seal

Improved floor seal enhances the water retention performance of the door and the lifetime of the seals.

24

Adaptocare Carer Screens are a portable alternative to fixed shower enclosures, these screens are compact and lightweight and help to keep the carer dry during assisted showering.

In addition to the standard sizes we supply, special sizes are also available on request.

Please Note: These screens are designed specifically for use in carer assisted showering, not for individual use as a replacement for shower doors.

AS1

Size: 650 x 650mm

Height: 750mm

Weight: 7kg

AS2

Size: 1000 x 1000mm

Height: 750mm

Weight: 9.4kg

Urban Chic

Urban Chic is a stylish range of toughened glass panels that are particularly suited for use with our Flowaway wet floor bases.

Combined with an attractive slip resistant floor covering they make for a robust and desirable feature in the wet room.

The toughened glass panels feature

8mm thick British kitemarked safety glass, a polished silver floorto-ceiling post that can be cut down to the suitable size and an optional horizontal support bracket to offer extra stability.

The panels incorporate concealed fixings and a generous 25mm adjustment per wall channel.

In addition to our wet floor bases, the panels are equally suitable for use with our range of level and low access shower trays. The walk-in glass panels are 2 metres high and come complete with 2600mm high floor-to-ceiling post.

Available Sizes:

700mm wide

760mm wide

800mm wide

900mm wide

1000mm wide

1200mm wide

25

AS3

Size: 685 x 685mm

Height: 750mm

Weight: 9.4kg

26

We manufacture a range of

L-shaped, U-shaped and straight curtain rails. In addition to the standard sizes that we supply, we can manufacture bespoke rails to suit almost any size you may require.

We can also supply hinged curtain rails to accommodate tracking hoists.

L-shaped rails

We supply white coated aluminium

L-shaped curtain rails as standard with our door options, and we can supply replacement or standalone rails.

All rails come complete with relevant fixings. We can manufacture rails to almost any size you may require.

U-shaped rails

When an L-shaped rail is not suitable, our U-shaped rails are ideal. Great for avoiding obstacles, such as windows or door frames.

We can make U-shaped rails to practically any size you would require.

The following sizes are available as standard products:

Straight rails

Supplied as standard with our

3-wall door options, and ideal for installation in alcoves.

We can manufacture rails to almost any size you may require, and they can easily be cut-to-length on site.

The following sizes are standard products:

L5

L6

L7

L1

L2

L3

L4

L8

1150 x 650mm

1150 x 750mm

1000 x 1000mm

1300 x 800mm

1500 x 760mm

1825 x 750mm

900 x 900mm

1200 x 1200mm

The following sizes are standard products:

U1

U2

650 x 1150 x 650mm

750 x 1150 x 750mm

Curtains

Our weighted white shower curtains come supplied with our door assemblies as standard, and we can also supply replacement and additional products.

LENGTH (mm) DROP (mm)

1800 1800

1800

1800

2000

2400

2000

2400

2500

2000

1800

2000

Adjustable Wall Brackets

Our wall brackets are adjustable, allowing compensation for out-ofsquare walls or installation at the incorrect height.

The following sizes are standard products:

27

Ceiling Drop Rod

Our curtain rails come supplied with a drop rod to provide ceiling support.

Extended drop rods are available to suit high ceilings.

Grab Post “Top Hat”

Our innovative “top hat” component ensures that the rail & curtain are fitted at the correct height, avoiding any trip hazards on the tray’s surface.

The part snap fits into the top of the support post so that there is no need to drill through any aluminium.

The connector on the top hat allows the curtain rail to be slid into place, ensuring correct spacing and an easy installation.

28

Complimentary

Site Survey

To ensure you choose the right products for your installation we provide a complimentary site survey to help you make the most of the room you are adapting.

This is a very valuable service at the assessment and specification stage for a number of reasons:

Architect

• Any proposed adaptations can be viewed & discussed, prior to any work commencing

• A detailed specification can be written ensuring an informed proposal.

• 2D plan & 3D colour drawings can be produced

• Requests for any specialist equipment can be discussed

• If the property poses any potential installation problems, they can be highlighted

Care Homes

& Hospitals

Client

Occupational

Therapist

Contractor

Housing

Association

3D Design

Following the site survey we will provide you with a 2D plan drawing and a 3D CAD drawing showing the appropriate shower tray and layout to help you visualise the proposed adaptation.

These drawings are a very helpful tool when initial plans and proposals are being discussed, and prove very popular with occupational therapists, specifiers and clients.

They are useful to contractors and clients as the drawings can include notes and recommendations made during the survey. E.g. Shower and grab rail positions, door requirements, sanitaryware location or any personal requests.

29

To arrange a free site survey with one of our dedicated staff please phone

0141 550 4177

or e-mail

[email protected]

30 31

The Adaptocare shower toilet cubicle is a toilet cubicle and showering unit combined which has been designed for installation in any room where electrical, water supplies and waste removal can be made available. The unit features an incredibly versatile design for users with reduced mobility.

A complimentary site survey is recommended before ordering this product.

We can supply a range of different thermostatic showers.

• Grab rails & accessories available

• Half-height doors

• Optional roof & ceiling light/ extraction fan

• Magnetic panel on inspection unit

• Compatible with our Torridon and Low

Access shower trays

Taking into consideration the space in which the cubicle is being installed, the door layout of the cubicle is then designed to meet the needs of the client.

The wall hung WC provides toileting facilities, whilst allowing the maximum available space within the cubicle to be used for showering.

The magnetic front panel allows for easy access to the framework and cistern contained within the inspection unit.

32

Clos-o-mat

The Clos-o-mat automatic toilet is designed for people who have restricted use of their hands. It restores privacy, independence and dignity for those who are otherwise unable to cleanse themselves in the usual way.

The Clos-o-mat Palma Vita automatic WC shower toilet provides flushing, washing and warm air drying from one simple operation. It is user-friendly for people who have restricted use of their hands. By eliminating hand contact, it also provides improved hygiene for all users.

Benefits

• Unique simultaneous flushing and washing action reduces infection risks

• Combines the functions of a WC and bidet in a unit the same size and appearance of a conventional WC.

• Relieves nursing and care staff from the disagreeable and unhygienic task of manual cleaning.

• Easy to operate with simple one-touch elbow pads.

• Also functions as a conventional flush WC (the washing/drying action operates only when seated).

• Improves personal hygiene – cleans with water not paper.

33

Flushing

Press either elbow pad whilst standing for conventional flush.

Washing

Press either elbow pad whilst seated and hold down for approximately 10-15 seconds, the simultaneous flush and warm water wash cycle will then begin.

Drying

Warm air drying automatically follows when elbow pad is released.

Additional Extras

1. Integrated fold-down support arms

2. Soft arm sleeves

3. Lateral body supports

4. Extended douche arm

5. Purpose made raising plinth

6. Touch sensitive switch

7. Infrared remote control

8. Proxy Switch

1

5

Lima Lift

The Lima lift is the ideal solution for when a Clos-o-mat is required to be used by multiple users.

Using a fingertip controlled infrared remote the height can be adjusted up or down, so that the unit can be easily adapted to cater for any height of user.

The Lima lift also features drop down arms that are raised & lowered with the unit, ensuring ease of access for all users.

2

6

3

7

4

8

34

Baths

Adaptocare provide a range of powered baths designed to make bathing a pleasure for the user. Each bath in our range has unique benefits to suit the variety of different clients needs.

Adaptocare will liaise with the client, occupational therapists, contractors and architects to ensure the selected bath meets the clients’ needs.

35

Adaptocare Platform Bath

• Fully adjustable hi-lo bath

• Can be used as a ‘dry’ bath

• 26 stone (165kg) safe lifting weight

• Full access to the bather at a comfortable height

• Battery back-up as standard

• Platform lifts to aid cleaning

• Removable backrest and adjustable footrest

• Pop-up waste

• 3” Lever Bath Filler Tap – W.R.A.S. No.0804041

• Left or right hand configuration (hinged platform)

AVAILABLE SIZES

Length 1800mm

Width

Lower Height

Lifted Height

750mm

700mm

1077mm

Adaptocare Powered Bath

• Unique patented leg-lifitng facility

• Option of support strap and nursing arms for additional support

• 24 stone (150kg) lifting capacity

• Smooth easy-to-clean surfaces

• Option of either manual or powered traverse

• Electronic diagnostic panel

• Battery back-up as standard

• Extra deep bathing depth

• Left or right hand configuration

• Hi-Lo option available

AVAILABLE SIZES

Length 1500mm, 1700mm or 1800mm

Width 745mm

Lower Height 645mm

Lifted Height 485mm to 830mm

Adaptocare Fold Down Bath

• Convenient side door allows for easy access in and out of the bath, and gives maximum access for both user and carer during high-dependency bathing

• Height of the bath can be easily adjusted at the touch of a button

• Powered door allows for quick and easy transfers

• Range of sizes from 1700mm to 2300mm

• Lifting capacity 350kg

• Cushion set and backrest (or headrest) as standard

• Air Spa option

• Neatfold changing system option

Adaptocare Reclining Bath

• Side access bath allows enjoyable bathing for users with reduced mobility

• The foot of the bath is pre-filled with water

• When the “swing” button is activated, the bath moves into the reclined position and the water flows to the other end of the bath to cover the user’s body

• Thermostatic mixing valve controls the water temperature

• Freestanding and accessible from 3 sides for carer assisted bathing

• Head cushion and 2 hand grips

• Universal access for reduced mobility, wheelchair or hoist

AVAILABLE SIZES

Length 1700mm to 2300mm

Width

Lower Height

Lifted Height

800mm

680mm

1080mm

AVAILABLE SIZES

Length 1900mm

Width

Height

800mm

1100mm

36

SS03

Wall mounted, compact hinged, padded seat with adjustable legs.

SEAT: 360x280mm

PROJECTION: 390mm

HEIGHT: 475-545mm

CAPACITY: 25 stones (159kg)

SS04

Wall mounted, hinged shower seat with adjustable legs.

SEAT: 460x380mm;

PROJECTION: 490mm

HEIGHT: 460-540mm;

CAPACITY: 30 stones (190kg)

We offer a variety of wall mounted shower seats, which fold away when not in use to maximise space for other users of the showering area.

AHSS

Free standing, adjustable height shower stool.

HEIGHT: 482-648mm;

WIDTH: 420x280mm

CAPACITY: 18 stones (115kg)

AHEWSS

Free standing, adjustable height, extra wide shower stool.

HEIGHT: 483-635mm;

WIDTH: 610x430mm

CAPACITY: 40 stone (250kg)

We also offer a range of free standing shower seats, that have been carefully selected to meet the needs of a variety of users.

We have a wide range of support systems & grab rails to complement our shower trays and doors.

Please note:

Due to the wide variety of different wall types, we do not supply fixings with any of our support systems.

AGR01

ABS white plastic with anti-bacterial coating, 35mm diameter ribbed shaft, flanged end grab rail with concealed fixings.

SIZES: 300mm, 450mm, 600mm

AGR02

Mild steel white polyester coated, 35mm diameter, flanged end grab rail with concealed fixings.

SIZES: 300mm, 450mm, 600mm,

750mm, 900mm

SS05

Wall mounted, hinged padded shower seat with adjustable legs.

SEAT: 460x380mm;

PROJECTION: 490mm

HEIGHT: 485-555mm;

CAPACITY: 30 stones (190kg)

SS06

Wall mounted, hinged shower chair with back rest, arms and adjustable legs.

SEAT: 490x380mm;

PROJECTION: 545mm

HEIGHT: 440-590mm;

CAPACITY: 30 stones (190kg)

SS07

Wall mounted, padded shower chair with back rest, arms and adjustable legs.

SEAT: 490x380mm;

PROJECTION: 545mm

HEIGHT: 440-590mm;

CAPACITY: 30 stones (190kg)

37

AHSTRB

Free standing, adjustable height shower stool, with detachable padded back rest.

HEIGHT: 530-680mm

WIDTH: 420x280mm

CAPACITY: 18 stones (115kg)

AHSSP

Free-standing, adjustable height shower stool.

HEIGHT: 450-550mm;

WIDTH: 500x300mm

CAPACITY: 16 stones (100kg)

AGR04

Mild steel white polyester coated 35mm diameter, double arm, hinged grab rail.

SIZES: 500mm or 760mm projection

AGR05

Mild steel white polyester coated 35mm diameter, double arm, hinged grab rail with height adjustable drop down leg (700-

800mm).

SIZES: 760mm projection

AGR06

Mild steel white polyester coated, 35mm diameter, handed, 90°, 3 flanged grab rail.

Right hand shown.

SIZES: 406 x 815 mm

*Special sizes on request

38

Gravity drainage is not always an option when fitting a level access shower base or wet floor base system.

Adaptocare’s range of automatic shower drain pump kits are designed to remove waste water from the shower trays to the waste pipe where there is no access to a gravity drain. They can be used with all types of tray: conventional, level access or side exit.

Made by Whale, our pumps meet all European standards and carry the CE mark. They offer proven reliability, with over 150,000 systems installed throughout the UK, and need no regular maintenance. All our pumps are virtually unblockable and can pump hair, gels, grit, and other shower waste. The three non-return valves also prevent odours escaping from the waste pipe.

SDP134T – Whale Instant Match® Kit

Instant Match

To minimise gulley suction noise the Whale Instant

Match uses a digital signal sent from the Mira

Advance Extra to automatically adjust the pump speed in relation to the flow rate of the shower.

• No set-up required – plug and play

• Variable pump speed tracks the flow rate of the

Mira Advance Extra

• No flow sensor / flow switch to fit

• Whale wet floor Whisper Gulley included as standard

• Free 5 Year Warranty once the product has been registered with Whale

How it works:

1. Internal Mira ATL shower flow sensor measures the flow rate going to shower head.

2. The flow rate information is sent via a cable to the

Whale Instant Match transformer.

3. The Whale Instant Match transformer and changes the speed of the pump dependent on the shower flow rate.

4. Matched pump speed and shower flow rate ensures that gulley suction noise is minimised

The following showers are designed to connect directly to the Whale

Instant Match Kit:

• Mira Advance ATL Extra 9.0kW

• Mira Advance ATL Flex Extra 9.0kW

See Page 41 for information on our electric shower range

Standard Kits

The original automatic shower drain kit with proven reliability is now combined with 12 speed pump settings and Whale Whisper gulley options.

• Adjustable pump speed settings designed to suit electric and mixer shower installations

• Integrated flow switch and filter

• Wet floor kit includes Whale Whisper gulley

• High performance. Draws 3 metres from gulley. Lifts 0.5 metre.

Pumps up 1 metre

• Flexible installation options. Small pump and transformer will fit into tight spaces – e.g. airing cupboard

• Free 5 Year Warranty once the product has been registered with Whale

BP1558B – Tray Gulley Kit

How it Works

1.

The flow switch turns on when water flows to the shower

2.

The flow switch activates the Whale transformer

3.

Speed settings designed to suit electric and mixer showers

BP1578 – Wetfloor Gulley Kit

Digital Smoothflow

The Digital Smoothflow Kit is designed to minimise gulley suction noise by precisely matching the pump flow rate to the shower flow rate.

• Variable pump speed – commissioned to each specific installation

• Variable speed ensures quiet operation of the system

• Suitable for Electric and Mixer Shower installations

• Whale wet floor Whisper Gulley included as standard

• Free 5 Year Warranty once the product has been registered with Whale

SDP113T – Digital Smoothflow Kit

How it Works

1.

The flow sensors measure the flow rate going to the shower head. This information is sent to the control unit.

2.

The control unit precisely matches the pump speed to the shower flow rate.

3.

Matched pump speed and shower flow rate ensures that gulley noise is minimised.

39

40

STW5-R

TSG1WH-STW1R

Supplied with all our Level & Easy Access shower trays as standard. We can offer additional & replacement units as well.

Clearance required: 95mm

Supplied with the Flowaway wet floor bases as standard. We can offer additional

& replacement units as well.

Clearance required: 140mm

All our shower trays and wet floors come supplied with a shower waste trap as standard. We also offer alternative traps designed to suit all installations.

ST70SS85

A shallow waste trap for use with our shower trays. It is ideal for floating floor installations where below floor space is limited.

Clearance required: 50mm

TSG50WH

A shallow waste trap for use with our

Flowaway wet floor bases. It is ideal for installations where below floor space is limited.

Clearance required: 101mm

Untrapped Pumped

Waste Gulley

A shallow waste for use with our shower trays and pumped drainage (see page

38). It is supplied as an alternative for use with our wet floor pump kits or with an existing pump.

Clearance required: 30mm

USG1WH

A shallow waste for use with our wet floor bases and pumped drainage (see page 38). It is supplied with our wet floor pump kits as standard or can be supplied separately for use with an existing pump.

Clearance required: 45mm

Electric Showers

Mira Advance

The Mira Advance is a RNIB endorsed thermostatic electric shower. It is designed to excel in safety and useability, making it easy to enjoy a safe shower at the perfect temperature.

• Thermostatic stability ensures safe showering temperature

• Separate temperature and flow controls to fine tune your perfect shower

• Select and forget control for your ideal shower at the touch of a button

• Adjustable Temperature Limit (ATL) allows selection of max temperature from 8 different settings

• Phased shutdown

• Large on/off buttons, audible click, tactile raised areas and back-lit buttons make it easy-to-use

• 4 spray showerhead

• 2 year guarantee

• Cold mains suitable

• Power ratings - 9.0kW

Triton Safeguard

The Triton Safeguard T100 Care is a thermostatic electric shower that was developed with occupational therapists and endorsed by RNIB for inclusive design. It is designed to be simple and easy to use, allowing independent safe showering.

• Thermostatic control – constantly regulated temperature provides safe showering

• Adjustable timed shutdown

• Adjustable maximum temperature stop

• Provision for connecting to a shower waste pump

• Phased shutdown

• Large start/stop button and audible alert when the shower is started and stopped

• Low pressure indicator

• Extended riser rail kit and hose with an additional bracket for ease of use

• Rub-clean showerhead with 5 spray patterns

• 2 year guarantee

• Cold mains suitable

• Power ratings - 8.5kW or 9.5kW

• Factory set maximum temperature stop 41°C to protect vulnerable users

The Following Models are Available:

• Mira Advance ATL 9.0kW

• Mira Advance ATL Extra 9.0kW *

• Mira Advance ATL Flex 9.0kW †

• Mira Advance ATL Flex Extra 9.0kW * †

• Mira Advance Low Pressure 9.0kW ◊

• Mira Advance Flex Low Pressure 9.0kW † ◊

* The Extra options allow the shower to work perfectly with the Whale Instant

Match shower pump. The Whale pump works at variable speeds to match the amount of water the Mira Advance Extra produces, preventing the intake of air and minimising noise.

† The Flex options offer an extended shower hose and height adjustable riser rail.

◊ The Low Pressure options allow the shower to be used in a low pressure system.

The Following Models are Available:

• Triton Safeguard Care 8.5kW

• Triton Safeguard Care 9.5kW

• Triton Safeguard Care Digilink 8.5kW *

• Triton Safeguard Care Digilink 9.5kW *

• Triton Safeguard Pumped Care 8.5kW ◊

* The Digilink options are designed to optimise plug & play connectivity with digital shower waste pumps.

◊ The Pumped option allows the shower to be used in a low pressure system.

41

42

Ramps

Our ramps allow wheelchair access to our range of Low Access shower trays. The structure of the ramps are fillled with recycled glass reinforced plastic (GRP).

Shower Tray

Ramp

Vinyl &

Ply Sheeting

35mm Corner Ramp

L-shaped ramp to suit our 35mm “Low Access” trays, measures 1200mm x 1200mm and can be cut down to suit tray size.

35mm Straight Ramp

Straight ramp to suit our 35mm “Low Access” trays, measures 1850mm in length and can be cut down to suit tray size.

65mm Straight Ramp

Straight ramp to suit our 65mm “Above Floor

Waste” trays, measures 1200mm in length.

Plinths

Our range of WC plinths allow WCs to be raised by a variety of heights.

They are manufactured with recycled glass reinforced plastic (GRP) and can be screwed directly onto the floor. Plinths are available in the following sizes:

• 50mm WC Plinth

• 75mm WC Plinth

• 100mm WC Plinth

At Adaptocare, we want to make sure you and your clients are delighted with our products. So it’s important we give you all the help you need when selecting and installing. On this page, you can find some useful hints and tips, but if you have any other questions, our technical staff are always available to help.

Tiling Upstand:

An attachable aluminium tiling upstand is supplied with all our shower trays (excluding the Fyne & the Ness). It is designed to give maximum flexibility to the positioning of the trays.

Fixing is simple:

Position and choose pilots, mark, drill and fix with the 4 stainless steel self-tapping screws provided.

Please Note:

A fine bead of silicone has to be applied under the tiling lip before fixing on with screws.

43

L/H

How to hand a tray:

Stand along the long end of the tray, facing into the tray.

2.

If the wall corner is on your left hand side, then you will need to specify the left hand option. If it is on your right hand side, you will need the right hand option.

If you are still unsure, please contact

Adaptocare, or forward us a sketch.

R/H

Our range of shower trays and wet floor bases are not suitable for use with power showers or mixer valves with high pressure output.

For high pressure outputs, a flow-reducing regulator valve can be fitted to the mixer head or shower head to reduce the water flow rate.

44

At Adaptocare, we are proud to manufacture our shower trays, wet floor formers and showering enclosures at our premises in

Glasgow. As we manufacture and assemble in-house we have complete control over quality and availability.

Most products are available from stock, and special configurations can be turned around in 1-2 days.

Such is our confidence in the quality of product manufactured at Adaptocare, we are happy to issue a Lifetime Guarantee on all shower trays and shower enclosures from 1st January 2011.

The Guarantee offers piece of mind to all end users and protects them in the unlikely event of a manufacturing fault on any Adaptocare tray or enclosure.

We would stress that all trays and enclosures must be installed exactly as specified in the relevant installation booklet. We must also advise that the

Lifetime Guarantee does not cover malicious or accidental damage or any other damage sustained outwith normal use.

Any products or parts failing within its lifetime under normal use should be reported directly to Adaptocare. We pledge to replace any such reported products or parts, within a reasonable time scale designed to meet the Client’s satisfaction.

The Lifetime Guarantee does not cover any associated products distributed by Adaptocare.

Any such claims outwith the first year should be made directly with the relevant manufacturer.

Kerr St

A74

Kerr Dr

Orr St

Bridgeton

Landressy St

James St

M ac kie th St

Main St

Main St

Newhall St

Olympia St ol be rt St

Franklin St

Acorn St

Savoy St

Rumford St

Da lmarnock Dr

A749

Broad St

Summer St

Muslin St

Reld Pl

Dale St

Finnart St

Finnart Square

Dunn St

Brookside St

Fielden Pl

Brook St

Rimsdale St

Fordeuk Street

Dalserf St

Ave St

Barrowfield St

A74

Baltic Pl

Queen Mary St

Bernard Terrace

Queen Mary St

London Rd

Terrace

Walkinshaw St

Bernard

B763

Bernard St

Barrowfield Dr

A74

Boden St

Baltic St

Arrol Rd

Albany St

Boden St

Ruby St

Barrowfield St

Frazer St

A749

O ld D alm arn ock

Rd

Baltic St

Dunn St

Baltic St

B763

A749

Nuneaton Street

Barrowfield Pl

Nuneaton Street

Stamford St

Barrowfield St

Nuneaton Street

Mordaunt Street

Baltic St

Kinnear Rd

Lily St

Sorn St

Kinnear Rd

Patna St

Troon St

Mordaunt Street

London Rd

Commonwealth Sports

Arena and Sir Chris Hoy

Velodrome Precinct

Irvine Ct

Irvine St

Springfield Rd

Davaar St

Bogside St

Kerrydale St

A74

Springfield Rd

Poplin St

Bartholomew St

Playfair St

Dalmar noc k Rd

Connal St

Springfield Rd

Baltic Ct

Baltic St

Garvald St

Millerfield Rd

Ardenlea St

Sunnybank St

Summerfield St

Dalmarnock

French St

B763

fe St

Reld St

Colvend St

Martin St

Rockclif

Carstairs St

Location

French St

From East/South:

• Leave the M74 at the A74 exit towards Tollcross/

Rutherglen

• At the roundabout, take the 3rd exit onto

London Road A74

• Continue along London Road for 2 miles

• Turn left onto Nuneaton Street

• Continue down Nuneaton Street, Adaptocare is about 2/3 of the way down on your right hand side

From West:

• Leave the M8 at the M74 exit towards Carlisle and continue along the M74 for 2 miles

• Leave the M74 at the junction 1A exit towards

Polamdie/Rutherglen

• At traffic signals turn left onto Polmadie Road and then right onto the A730

• Follow road round to left and continue along

• Turn left onto Dunn Street B763

• At traffic signals turn right onto the A749 towards

Cambuslang/Rutherglen

• Take first left onto Nuneaton Street

• Adaptocare is about 1/3 of the way up Nuneaton

Street on your left hand side

Janefield St

Kinloch St

Dalriada St

46

Shower tray index

Here you will find all the information you should need on our range of shower trays and wet floor bases, to help you decide which trays to specify.

If you have any further questions, give us a call and our design team will be on hand to help.

We will recommend which product to use, to make the best use of the available resources.

LEVEL ACCESS

Torridon®

1000 x 1000 mm 1765 x 765 mm*

1265 x 765 mm* 1765 x 865 mm*

1265 x 865 mm*

Fyne®

1220 x 710 mm*

1220 x 800 mm*

Ness®

1850 x 710 mm*

1850 x 800 mm*

LOW ACCESS

Ossian®

1200 x 650 mm 1300 x 650 mm

1200 x 700 mm 1300 x 700 mm

1200 x 760 mm 1400 x 700 mm

1500 x 710 mm

Etive®

1700 x 700 mm

1700 x 760 mm

Madden®

1850 x 700 mm

Coulter®

1200 x 700 mm

Thom®

1200 x 700 mm

1200 x 800 mm

Rannoch®

900 x 900 mm

47

WET FLOOR FORMERS

Flowaway ®

FA1

FA2

FA3

1335 x 840 mm

1000 x 1000 mm

1540 x 820 mm

FA5 1200 x 1200 mm

FA900 900 x 900 mm

Flowaway 22®

FA22 1300 x 800 mm

FA23 1135 x 700 mm

FA1500 1500 x 1500 mm

ABOVE FLOOR WASTE

Tay®

1200 x 700 mm*

Our shower tray range incorporates a number of key features:

• A proven slip resistant tread pattern which is kind on sensitive feet

• Covered by our fully transferable Lifetime Guarantee

• Independently tested to withstand loads in excess of 100st

• Manufactured from 95% recyclable glass reinforced plastic

*Please specify left or right hand when ordering

48

Door option index

49

Whatever your space limitations, access restrictions or type of floor construction, our design team are here to help. All we need is a simple sketch containing some basic information and we will supply a solution by return. Our door assemblies are either supplied with a straight or L-shaped rail as standard, and we can also supply U-shaped rails. Our doors are supplied at a standard height of 750mm, and other heights are available on request.

Option A

2 fixed panels, vertical support post, door with 180° rise & fall hinge, L-shaped rail and weighted curtain. RH illustrated.

Option B

2 fixed panels, vertical support post, bi-fold door with 180° rise & fall hinge, L-shaped rail and weighted curtain. RH illustrated.

Option C

Fixed panel, vertical support post, 2 doors with 180° rise & fall hinge, L-shaped rail and weighted curtain. RH illustrated.

Option D

Fixed panel, vertical support post, bi-fold door with 180° rise & fall hinge, L-shaped rail and weighted curtain. RH illustrated.

Option E

Fixed panel, vertical support post, twin bi-fold doors with 180° rise & fall hinge, L-shaped rail and weighted curtain. RH illustrated.

Option F

Fixed panel, vertical support post, twin bi-fold doors with 180° rise & fall hinge, L-shaped rail and weighted curtain. RH illustrated.

Option G

Fixed panel, vertical support post, tri-fold door with 180° rise & fall hinge, L-shaped rail and weighted curtain. RH illustrated.

Option H

Twin bi-fold doors with 180° rise & fall hinge,

L-shaped rail and weighted curtain. Not handed when used with square trays.

Option J

Half-height panel, vertical support post,

L-shaped rail and weighted curtain. RH illustrated.

Option K

Full-height panel, L-shaped rail and weighted curtain. RH illustrated.

Option L

Twin bi-fold doors to suit 3-wall installation,

180° rise & fall hinge, straight rail and weighted curtain. Not Handed.

Option N

2 fixed panels & 2 vertical support posts, bi-fold door with 180°rise & fall hinge, L-shaped rail and weighted curtain. RH illustrated.

Option O

2 fixed panels & 2 vertical support posts, bi-fold door with 180° rise & fall hinge, L-shaped rail and weighted curtain. RH illustrated.

Option P

Fixed panel, vertical support post and bi-fold door to suit 3-wall installation with 180° rise & fall hinge, straight rail and weighted curtain. RH illustrated.

Option Q

Fixed panel, vertical support post and bi-fold door to suit 3-wall installation with 180° rise & fall hinge, straight rail and weighted curtain. RH illustrated.

Option W

2 fixed panels, 2 vertical support posts and bifold door to suit 3-wall installation with 180° rise & fall hinge, straight rail and weighted curtain. RH illustrated.

Bespoke Doors

To ensure you get the solution you are looking for, we can arrange a complimentary site survey and provide you with CAD drawings.

We will take accurate dimensions and tile-to-tile sizes so that the doors can be made-to-measure.

As well as our standard door options, we can provide special configurations to suit specific jobs. We can discuss any specific requirements you may have, to ensure you get the doors to meet your needs.

50

The following terms and conditions are applicable to all sales unless otherwise agreed in writing:

Carriage

Orders over the value of £500.00 nett are delivered free (UK mainland only). With orders under £500.00 nett, a carriage charge is applicable.

Payments:

Settlement is due within 30 days nett of the invoice date. Cheques should be made payable to Adaptocare Limited. Payment may also be made by BACS transfer or credit card.

Lead Times:

Lead times are given in good faith but are affected by market demands and availability. Please note that any lead time quoted is only from receipt of official order with full specifications and instructions to proceed.

VAT:

VAT will be added to all invoices at the current rate unless the customer provides a valid VAT Exemption Certificate.

Prices:

We reserve the right to change prices without prior notice and invoice at the price ruling at the date of receipt of order.

In the event of a price increase of more than 5%, Adaptocare will notify the customer prior to processing the order.

Catalogue Descriptions:

Adaptocare takes great care to ensure that catalogue descriptions and illustrations are clear and accurate. Some products may vary slightly from those described.

Adaptocare reserves the right to alter designs and specifications without prior notice. Every effort is made to ensure that all technical specifications are accurate, however, these cannot be guaranteed and are intended for guidance only.

Return of Goods:

Goods ordered in error may only be returned at the discretion of Adaptocare.

These goods must be suitably packaged by the customer for transportation and returned in saleable condition. Goods returned without the suitable packaging will not be credited. The cost of the initial delivery and returns of goods to

Adaptocare will be borne by the customer.

All relevant paperwork must be completed and supplied at the time of returning goods.

Title and Risk:

Risk in the Goods shall pass to the customer when the goods are delivered.

The property of the Goods shall remain with us until payment of all sums due to us whether in respect of this contract or otherwise is made.

Until Title Passes:

• You shall hold the Goods as our fiduciary agent and bailee.

• The Goods shall be stored separately from any other goods and you shall not interfere with any identification marks, labels, batch numbers or serial numbers on the Goods.

• We agree that you may use or agree to sell the Goods as principal and not mixed with any other monies or paid into an overdrawn bank account and shall at all times be identifiable as our money.

• We shall be entitled at any time to recover any or all of the Goods in your possession to which we have title and for that purpose we, our employees or agents, may with such transport enter upon any premises, occupied by you or to which you have access and where the Goods may be or are believed to be situated.

Guarantee:

Our products are covered by the following guarantee which does not affect the customer’s statutory and other legal rights.

Any products or parts failing within its lifetime under normal use should be reported directly to Adaptocare. We pledge to replace any such reported products or parts within a reasonable time scale designed to meet the Client’s satisfaction. Adaptocare will not accept a claim under this guarantee if it has been used otherwise than in accordance with

Adaptocare’s instructions. The guarantee does not cover any damage due to accident, misuse or neglect.

Where the Goods are not manufactured by Adaptocare the guarantee applicable will be that of the original equipment manufacturer. Adaptocare’s shower bases and glazing panels are fully guaranteed for the product lifetime against breaking in normal use. As we have complete faith in our products, we uniquely offer this guarantee as fully transferable.

Claims:

If, upon receipt, the Goods appear damaged or incomplete, please indicate on the carrier’s documentation. Please also notify Adaptocare no later than 3 days after delivery. Failure to notify within 3 days will negate subsequent claims.

51

52

244 Nuneaton Street, Glasgow, G40 3DX

• Tel: 0141 550 4177 • Fax: 0141 554 4171

• E-mail: [email protected] • Web: www.adaptocare.co.uk

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement