PROCESS CALIBRATION TOOLS CATALOG

PROCESS CALIBRATION TOOLS CATALOG
2014-2015
PROCESS CALIBRATION
TOOLS CATALOG
Electrical, Multifunction,
and mA Loop Calibration
Pressure Calibration
Data Acquisition
Temperature Calibration
Process Calibration Tools
From Fluke and Fluke Calibration
Working in a process environment such as pharmaceutical, refining or other
industrial area can be challenging. Whether you’re working at a bench, out
in the plant, or in the field, you need accurate tools that you can count on.
Finding the right tools for the specific challenges you face every day is important, so
we’ve provided an “at-a-glance” guide to the wide range of multifunction, mA loop,
pressure and temperature calibrators that we carry. For complete information on
our field and bench solutions to all your calibration needs visit www.fluke.com,
www.flukecal.eu, or one of the product pages listed in this catalog.
Electrical and multifunction calibration
Fluke offers a broad range of field and bench calibrators to source, simulate,
and measure pressure, temperature, and electrical signals to help you verify
and adjust your test equipment or almost any process instrument.
mA loop calibration
Loop calibrators are essential tools for working with 4-20 mA current loops. Fluke loop
calibrators provide mA sourcing, simulation and measurement, readouts in both mA
and % of span, 24 V loop supply, simple operation and accuracy you can count on.
Pressure calibration
Instrumentation is found in virtually every process plant. Periodic calibration
of these instruments is required to keep plants operating efficiently and
safely. Fluke provides a wide selection of field and bench calibration tools to
help you quickly and reliably calibrate your pressure instrumentation.
Temperature calibration
Temperature calibration refers to the calibration of any device used in a system that
measures temperature—from sensors to transmitters to displays. Fluke offers bench and
field solutions to ensure process temperature accuracy of not only the system’s electronic
temperature signals, but also the very temperature sensors that initiate those signals.
2
Process Calibration Tools
Process Calibration Tools
Electrical,
Multifunction, and
mA Loop Calibration
Pressure Calibration
4
10
Temperature
Calibration
16
Multifunction Calibrators................. 5
Digital Pressure Calibrators............11
Handheld Temperature Calibrators.17
Documenting Process Calibrator..............5
Pressure Calibrator...................................11
RTD Process Calibrator............................17
Documenting Process Calibrator
with HART....................................................5
Pressure Calibrator with Pump..............11
Thermocouple Calibrator.........................17
Portable Electric Pressure Calibrator....11
Temperature Calibrator............................17
Precision Process Calibrator.....................5
Precision Multifunction
Process Calibrator.......................................6
Multifunction Process Calibrator.............6
Digital Multimeters.....................................6
Precision Multimeters................................6
mA Loop Calibrators........................ 7
Loop Calibrators..........................................7
IS Loop Calibrator.......................................7
Precision Loop Calibrator..........................7
Precision Loop Calibrator with HART.....7
Communications/Diagnostics...................7
Volt/mA Calibrator......................................7
ProcessMeter ™ Tools...................................8
IS Pressure Calibrator..............................11
Pressure Modules......................................12
IS Pressure Modules.................................12
Dual Range Pressure Calibrator.............12
Multifunction Field Temp Sources.. 17
Field Metrology Wells..............................17
Field Temperature Sources............ 18
Pressure Modules......................................12
Handheld Dry-Wells.................................18
IS Pressure Modules.................................12
Dual-Well Dry-Well..................................18
Pressure Comparators and Master
Gauges........................................... 13
Gas Pressure Comparators......................13
Precision Pressure Gauge Calibrator.....13
Field Dry-Wells..........................................18
Ultra-Cool Field Metrology Well.............18
Thermocouple Furnace............................19
Micro-Baths................................................19
Reference Pressure Gauges.....................13
Metrology Wells........................................19
Reference Pressure Calibrators...... 14
Infrared Temperature Sources....... 19
Portable Pressure Calibrator...................14
Milliamp Clamp Meters..............................8
Bench Deadweight Testers............. 14
Milliamp Process Clamp Meters...............8
Pneumatic Deadweight Tester................14
Hydraulic Deadweight Testers...............15
Electronic Deadweight Testers...............15
Precision IR Calibrators...........................19
Field IR Calibrators...................................19
Thermometer Standards................. 20
Stik Thermometer.................................... 20
Handheld Thermometer Readout.......... 20
Four-Channel Thermometer Readout... 20
Thermometer Readouts........................... 20
Data Acquisition
Ambient Conditions Monitor.......... 20
9
Precision Thermo-Hygrometer.............. 20
Precision PRTs............................... 21
Thermistors................................... 21
Data Acquisition System...................9
Software.......................................................................................22
Accessories.................................................................................22
Process Calibration Tools
3
Electrical,
Multifunction,
and mA Loop
Calibration
4
Electrical, Multifunction, and mA Loop Calibration
Multifunction
Calibrators
These field and bench
calibrators source, simulate,
and measure pressure,
temperature, and electrical
signals with exceptional
precision.
753 Documenting
Process Calibrator
753
754
Rugged handheld tool for sourcing, simulating and measuring
pressure, temperature, and electrical signals.
• Measure volts, mA, RTDs,
thermocouples, frequency, and
ohms to test sensors, transmitters and other instruments
• Source/simulate volts, mA, thermocouples, RTDs, frequency,
ohms, and pressure to calibrate
transmitters
• Power transmitters during test
using loop supply with simultaneous mA measurement
• Download procedures and
upload calibration results from
field calibrations
• NIST traceable calibration
www.fluke.com/753
7526A Precision
Process Calibrator
Best balance of economy and
accuracy for calibration of
temperature and pressure process
measurement instrumentation.
• Sources and measures dc voltage, current, resistance, RTDs
and thermocouples
• Measures pressure using Fluke
700/525A-P pressure modules
• Includes 24 V dc loop power
supply, automated switch-test
function and measures 4 mA to
20 mA
• NIST traceable calibration
www.flukecal.eu/7526A
754 Documenting Process
Calibrator with HART
7526A
Rugged, reliable tool for calibrating, maintaining, and
troubleshooting HART and
other instrumentation.
• Measure volts, mA, RTDs,
thermocouples, frequency, and
ohms to test sensors, transmitters and other instruments
• Source/simulate volts, mA, thermocouples, RTDs, frequency,
ohms, and pressure to calibrate
transmitters
• Supports popular models of
HART transmitters, with more
device-specific command support than any other HART field
calibrator
• Download procedures and
upload calibration results from
field calibrations
• NIST traceable calibration
www.fluke.com/754
Electrical, Multifunction, and mA Loop Calibration
5
726
8808A
725
726 Precision Multifunction
Process Calibrator
725EX IS Multifunction
Process Calibrator
Designed specifically for the
process industry with broad
workload coverage, calibration
power and unsurpassed accuracy. Includes all the features and
functions of the 725 below plus:
• Enhanced accuracy
• Pulse count sourcing and pulse
measurement totalizing
• Pressure switch test
• Error % calculation
• NIST traceable calibration
Easy-to-use, intrinsically safe
field calibrator can calibrate
almost any process instrument
needing service where explosive
gasses may be present.
• ATEX II 1 G Ex ia IIB 171 °C
KEMA 04ATEX 1303X
• I.S. Class I, Division 1 Groups
B-D, 171 °C compliance
• Measure Volts dc, mA, RTDs,
thermocouples, frequency and
ohms
• Source or simulate volts dc, mA,
RTDs, thermocouples, frequency
and ohms
•Measure/source pressure using
any of eight Fluke 700PEX
Pressure Modules
• NIST traceable calibration
www.fluke.com/726
8845A/8846A
725Ex
725 Multifunction Process
Calibrator
A powerful and easy-to-use field
calibrator to test and calibrate
almost any process parameter.
• Measure volts, mA, RTDs,
thermocouples, frequency,
and ohms to test sensors and
transmitters
• Source/simulate volts, mA, thermocouples, RTDs, frequency,
ohms, and pressure to calibrate
transmitters
• Measure/source pressure
using any of 29 Fluke 700Pxx
Pressure Modules
• Source mA with simultaneous
pressure measurement to
conduct valve and I/P tests
• NIST traceable calibration
www.fluke.com/725
www.fluke.com/725EX
8808A Digital Multimeter
Versatile multimeter for
manufacturing, development
and service applications.
• 5.5 digit resolution
• Basic V dc accuracy of 0.015 %
• Dual display
• NIST traceable calibration
www.flukecal.eu/8808A
8845A/8846A Precision
Multimeters
Precision and versatility for bench
or systems applications.
• 6.5 digit resolution
• Basic V dc accuracy of up to
0.0024 %
• Dual display
• /C models include accredited
calibration
www.flukecal.eu/8845A
6
Electrical, Multifunction, and mA Loop Calibration
709
709H
mA Loop Calibrators
Fluke loop calibrators are
ideal for a wide variety
of calibration applications
from 4 to 20 mA.
705 Loop Calibrator
705
A cost-effective, integrated solution for calibration, repair and
maintenance of current loops.
• mA sourcing, simulation and
measurement
• Simultaneous mA and % of
span display
• 24 V loop supply with mA
measure
• 0 V dc to 28 V dc measurement
to check loop voltage
• NIST traceable calibration
www.fluke.com/705
707 Loop Calibrator
707
A high performance, extremely
fast and easy-to-use solution for
calibration, repair and maintenance of current loops.
• mA sourcing, simulation and
measurement
• 24 V loop supply with mA
measure, including 250 Ω HART
resistor
• 0 V dc to 28 V dc measurement
to check loop voltage
• NIST traceable calibration
www.fluke.com/707
707EX IS Loop Calibrator
707EX
An intrinsically safe option for use
in explosion endangered areas—
certified in accordance with the
ATEX directive (Ex II 2 G Ex ia IIC
T4) in Zones 1 and 2.
• 1 µA resolution for mA source,
simulate and measure
• Measures V dc to 28 V
• 0-20 mA or 4-20 mA default
startup modes
•HART® compatible resistance
is connected in series with the
loop supply for compatibility
with HART communicators
• NIST traceable calibration
709 Precision Loop
Calibrator
Reduces the time it takes to
measure or source voltage or
current and power up a loop.
• Best-in-class accuracy at 0.01%
reading
• Small rugged design operates
on six standard AAA batteries
• Intuitive user interface with
Quick-Set knob for fast setup,
easy use
• Built-in selectable 250 Ω resistor
for HART communication
• 24 V dc loop power with mA
Measure Mode (-25% to 125%)
• Resolution of 1 µA on mA ranges
and 1 mV on voltages ranges
• NIST traceable calibration
www.fluke.com/709
709H Precision Loop
Calibrator with HART
Communications/Diagnostics
Designed to save time and
produce high-quality results
• HART Communication built
in for easy HART device
maintenance
• Best-in-class accuracy at 0.01%
reading
• Small rugged design operates
on six standard AAA batteries
• Intuitive user interface with
Quick-Set knob for fast setup,
easy use
• Built-in selectable 250 Ω resistor
for HART communication
• 24 V dc loop power with mA
Measure Mode (-25% to 125%)
• Resolution of 1 µA on mA ranges
and 1 mV on voltage ranges
• NIST traceable calibration
www.fluke.com/709H
www.fluke.com/707EX
Electrical, Multifunction, and mA Loop Calibration
7
715 Volt/mA Calibrator
Outstanding performance,
durability and reliability.
• Measure loop current (0-20 mA,
4-20 mA) signals with very
high accuracy of 0.015% and 1
mA resolution
• Measure voltage output process
signals from PLCs, transmitters
• Source or simulate 24 mA loop
current
• Source voltage to 100 mV or 10 V
• 24 V loop supply with simultaneous current measurement
• Enhanced voltage and current
measure and source accuracy
• NIST traceable calibration
715
www.fluke.com/715
787 ProcessMeter™
A complete troubleshooting solution in the palm of your hand
with a digital multimeter and loop
calibrator in one tool.
• 1000 V overload protection
on V, ohms, frequency
• 150 V overload protection on
mA, backed up by 440 mA
1000 V fuse
• 25 % manual step plus auto
step and auto ramp on mA
output
• CAT III 1,000V rating
787
www.fluke.com/787
789 ProcessMeter™
The 789 includes all the popular
features of the 787 and adds:
• 24 V loop power supply
• 1200 ohm drive capability on
mA source
• HART mode setting with loop
power and a built-in 250 ohm
resistor
• 0 % and 100 % buttons to
toggle between 4 and 20 mA
sourcing for a quick span check
• CAT IV 600 V rating
789
www.fluke.com/789
771 Milliamp Process Clamp
Meter
Saves time by making fast, accurate measurements on 4-20 mA
signal loops without breaking the
circuit.
• 0.01 mA resolution and
sensitivity
• Measure mA signals for PLC and
control system analog I/O
• Measure 10 to 50 mA signals in
older control systems using the
99.9 mA range
www.fluke.com/771
772 Milliamp Clamp Meter
Expanded features of the popular
771 mA Clamp Meter by adding
loop power and mA sourcing to
the capabilities.
• Measure 4 to 20 mA signals
with in-circuit measurement
• Simultaneous mA in-circuit
measurement with 24 V loop
power for powering and testing
transmitters
• Source 4 to 20 mA signals for
testing control system I/O or I/Ps
• Automatically ramp or step the
4 to 20 mA output for remote
testing
www.fluke.com/772
773 Milliamp Process Clamp
Meter
The premier mA clamp meter,
adds advanced troubleshooting
features and voltage source/
measure for testing voltage I/O.
Icludes all the features of the
772 plus:
• DC voltage sourcing and measurement, verify 24 V power
supplies or test voltage I/O
signals
• Scaled mA output provides
a continuous mA signal that
corresponds to the 4 to 20 mA
signal measured by the mA
clamp
• Simultaneously source and
measure mA signals
www.fluke.com/773
771/772/773
8
Electrical, Multifunction, and mA Loop Calibration
Data
Acquisition
Data Acquisition
System
Fluke Hydra Series III
provides best-in-class
thermocouple accuracy in
a portable system.
2638A Hydra Series III
2638A
2638A-100
Price-performance breakthrough
in a stand-alone data acquisition
system
• DC accuracy of 0.0024 %
• Thermocouple accuracy of 0.5 °C
• Up to 66 universal differential
isolated inputs
• On-screen color trend graphing
andanalysis
• Easy-to-use menu system for
setup and data management
• Input types: ac V, dc V, ac I, dc
I, thermocouple, PRT (2, 3, 4 w),
thermistor,resistance (2-4 w),
frequency
• /C models include accredited
calibration
2638A-100 Extra Universal
Input Module for 2638A
• Dedicated low burden ac/dc
current channels
• 20 universal channels and two
dedicated low burden current
channels (ac/dc) per module
Data Acquisition
9
Pressure
Calibration
10
Pressure Calibration
717
718
718EX
Digital Pressure Calibrators
Built-in features like mA measure, loop power, switch test
and transmitter error calculation make these pressure
calibrators powerful tools that are easy to use.
717 Pressure Calibrator
719PRO
Rugged, reliable and accurate
calibrator with outstanding performance and durability.
• Measure pressure, 0.025 % of
full scale with internal sensor
up to 10,000 psi/690 bar sensor
(10000G model)
• Measure mA with 0.015 %
accuracy and 0.001 mA resolution, while sourcing 24 V loop
power
• Measure pressure to 10,000 psi/
700 bar using one of 29 Fluke
700Pxx Pressure Modules
• NIST traceable calibration
www.fluke.com/717
718 Pressure Calibrator
with Pump
Provides a total pressure calibration solution for transmitters,
gauges and switches.
• Pressure source and milliamp
measurement to calibrate and
maintain almost any pressure
device
• Integrated pump is easily
cleaned when accidently
exposed to fluids that reduces
cost of ownership and repairs
and enables servicing the pump
in the field
• 1 psi, 30 psi, 100 psi and
300 psi ranges mean few extra
tools required
• NIST traceable calibration
www.fluke.com/718
719 and 719PRO Portable
Electric Pressure Calibrators
Calibrate and test pressure devices
quickly and easily with the built-in
electric pump.
• Source mA with simultaneous
pressure measurement to test
valves and I/Ps
• Simulate mA signals to troubleshoot 4-20 mA loops
• Power transmitters during test
using 24 V loop supply with
simultaneous mA measurement
• New 300 psi range, generate
up to 300 psi, with internal
Electric pump (719PRO)
• Precision temperature measurement combined accuracy of
± 0.25 °C (0.45 °F) when using
720 RTD probe (optional
accessory for use with 719PRO)
• NIST traceable calibration
www.fluke.com/719
718EX IS Pressure Calibrator
A powerful, intrinsically safe and
self-contained pressure calibrator
for use in explosion endangered
areas.
• ATEX II 1G Ex ia IIC T4
compliant
• Built-in pressure/vacuum hand
pump, with fine adjust vernier
and bleed valve
• 30 psi, 100 psi, and 300 psi
ranges (2 bar, 7 bar, and
20 bar)
• Pressure measurement to
200 bar using any of eight
intrinsically safe Fluke 700PEx
Pressure Modules
• NIST traceable calibration
www.fluke.com/718EX
Pressure Calibration
11
700P
700P Pressure Modules
A full range of differential, gage,
absolute, vacuum, dual and intrinsically safe pressure modules are
available, from -15 psi (-103 kPa)
to 10,000 psi (69 MPa).
• Best-in-class 0.025 % reference
uncertainty
• Rugged, chemical-resistant
packaging
• Temperature compensated
using proprietary micro-technology linearized output
• Digital communication to
calibrators; no analog losses or
errors
• NIST traceable calibration
www.fluke.com/700P
700PEX
700PEx IS Pressure Modules
Intrinsically safe pressure modules to create a complete pressure
test solution.
• Certified by CSA: I.S. Class I,
Div 1, Groups A-D T4,
Ta = 0 °C to 50 °C
• ATEX II 1G Ex ia IIC T4
compliant
• NIST traceable calibration
www.fluke.com/700PEX
721
721 Dual Range Pressure
Calibrator
Two measurement ranges plus
*temperature measurement make
the 721 ideal for gas custody
transfer calibration applications.
• Fourteen models
• Up to (3) displayed measurement simultaneously
• Simplified user interface for
ease of use
• Rugged, durable design with
protective holster
• High accuracy, 0.025% total
measurement uncertainty for
one year
• Pt100 RTD input for precise
temperature measurement,
accurate to 0.1°C (0.2°F)
• Requires 720RTD probe sold
separately as an accessory
• NIST traceable calibration
www.fluke.com/721
12
Pressure Calibration
P5510
P5513
Pressure
Comparators and
Master Gauges
Precise pressure generation
for comparing a device
under test to a master
gauge.
P5515
P5510 Gas
Pressure Comparator
Easy, efficient pressure and
vacuum generation in a single
device.
• Pressure to 2 MPa (300 psi)
• Vacuum to -80 kPa (-12 psi)
www.flukecal.eu/P5510
P5513 Gas
Pressure Comparator
700G
High quality, precise gas pressure
generation and control.
• Precise pressure regulation
to 210 MPa (3k psi) with high
quality needle valves
• Built-in screw press for fine
pressure adjustment
• Optional vacuum/pressure
pump, -80 kPa to 2 MPa
(-12 psi to 300 psi)
www.flukecal.eu/P5513
P5514 Hydraulic
Pressure Comparator
2700G
Easy, efficient hydraulic pressure
generation.
• Generate and precisely adjust
pressure to 70 MPa (10 k psi)
• Compatible with a wide range
of fluids
www.flukecal.eu/P5514
P5514
P5515 Hydraulic
Pressure Comparator
High quality, precise hydraulic
pressure generation and control.
• Generate and precisely adjust
pressure to 140 MPa (20 k psi)
• Integrated hand pump for
system priming and large
volume applications
• Compatible with a wide range
of fluids
www.flukecal.eu/P5515
700G Precision Pressure
Gauge Calibrator
Rugged construction for reliable
measurements in the field.
• Twenty-three ranges from 10
inH20/1 bar to 10,000 psi/690
bar and 0.05 % accuracy
• Combine with a comparator kit
for a complete solution
• Four new absolute pressure
measurement ranges
• Use the 700G/TRACK Software
to upload over 8,000 logged
pressure measurements
• Up to 1500 hours battery life
• I.S. rating, CSA; Class 1, Div 2,
Groups A-D rating, ATEX: rating:
II 3 G Ex nA IIB T6
• NIST traceable calibration
www.fluke.com/700G
2700G Series Reference
Pressure Gauges
Best-in-class accuracy from a
master pressure gauge.
• Precision pressure measurement
from 100 kPa (15 psi) to 70 MPa
(10,000 psi).
• Accuracy to ± 0.02% of
full scale
• Combine with the P55XX
Pressure Comparators for a
complete benchtop pressure
calibration solution
• /C models include accredited
calibration
www.flukecal.eu/2700G
Pressure Calibration
13
3130
Reference Pressure
Calibrators
Portable, high-quality
pressure gauges
3130 Portable
Pressure Calibrator
Everything you need for highly
accurate calibrations of pneumatic
field instruments.
• Measure and generate pressures from -12 psi (0.8 bar) to
2 MPa (300 psi, 20 bar)
• Accuracy of ±0.025% reading
to ±0.01% FS
• Works with compressed plant
air or internal pump
• 24 V loop power and electrical
measurement for transmitters
and switches
• Compatible with Fluke 700P
pressure modules
• NiMH battery
• /C models include accredited
calibration
www.flukecal.eu/3130
P3010/P3020/P3030
Bench Deadweight
Testers
Deadweight testers are
highly accurate, robust
and flexible pressure
measurement standards
capable of calibrating a wide
range of instruments.
P3010 Single Piston Gas
Deadweight Tester
A high quality, high performance
gas deadweight tester.
• 0.015 % of reading accuracy
(0.008 % optional)
• Ranges cover from -100 kPa
(-15 psi) vacuum to 3.5 MPa
(500 psi) pressure
• Integrated vacuum/pressure
pump available to 2 MPa
(300 psi)
• Accredited calibration
www.flukecal.eu/P3010
P3020 Dual Piston Gas
Deadweight Tester
Unique suspended piston design
offers vacuum and pressure calibration in a single instrument.
• 0.015 % of reading accuracy
(0.008 % optional)
• Ranges cover from 1.5 kPa
(5 in H 2O) to 3.5 MPa (500 psi)
• All models feature vacuum
measurement to -100 kPa
(-15 psi)
• Integrated vacuum/pressure
pump available to 2 MPa
(300 psi)
• Accredited calibration
www.flukecal.eu/P3020
P3030 High Pressure Gas
Deadweight Tester
Innovative liquid-lubricated piston
offers low drop rates and high
tolerance to contamination.
• 0.015 % of reading accuracy
(0.008 % optional)
• Ranges cover from 100 kPa
(10 psi) to 14 MPa (2000 psi)
• Integrated control valves and
screw press for fine adjustment
• Accredited calibration
www.flukecal.eu/P3030
14
Pressure Calibration
P3110/P3120
P3210/P3220
P3110 Single Piston Oil
Deadweight Tester
6531
6532
P3800
P3800 High Pressure Oil
Deadweight Tester
High quality, high performance,
easy to use oil pressure calibration.
• 0.015 % of reading accuracy
(0.008 % optional)
• Ranges cover from 100 kPa
(10 psi) to 140 MPa (20 k psi)
• Integrated pressure generation
and control is standard
• Accredited calibration
High performance, easy to use
very high pressure oil calibration.
• 0.02 % of reading accuracy
(0.015 % optional)
• Ranges up to 400 MPa (60 k
psi)
• Integrated pressure generation,
intensifier and control
• Accredited calibration
www.flukecal.eu/P3110
www.flukecal.eu/P3800
P3120 Dual Piston Oil
Deadweight Tester
6531 Electronic Deadweight
Tester
Dual piston design offers maximum hydraulic pressure
calibration workload coverage.
• 0.015 % of reading accuracy
(0.008 % optional)
• 100 kPa (10 psi) to 110 MPa
(16 k psi) in a single instrument
• Integrated pressure generation
and control is standard
• Accredited calibration
www.flukecal.eu/P3120
P3210 Single Piston Water
Deadweight Tester
Specially designed to use water as
a test medium.
• 0.015 % of reading accuracy
(0.008 % optional)
• Ranges cover from 100 kPa
(10 psi) to 70 MPa (10 k psi)
• Integrated pressure generation
and control is standard
• Accredited calibration
A digital alternative to the traditional deadweight tester.
• 0.02 % of reading from 10 % to
100 % of instrument range
(10:1 turndown)
• Ranges from 7 MPa (1000 psi)
to 200 MPa (30 k psi)
• Integrated hydraulic pressure
generation and control
• Compatible with water and a
wide range of oils and other
fluids
• Onboard test routines, data
storage, and other advanced
features
• Accredited calibration
www.flukecal.eu/6531
6532 Extended Range
Electronic Deadweight
Tester
All the features of model 6531
with extended pressure range for
maximum workload coverage.
www.flukecal.eu/P3210
• 0.02 % of reading from 1 %
to 100 % of instrument range
P3220 Dual Piston Water
(100:1 turndown)
Deadweight Tester
• Models with full scale ranges
Dual piston design offers maximum
from 70 MPa (10 k psi) to
water pressure calibration workload
200 MPa (30 k psi)
coverage.
• Accredited calibration
• 0.015 % of reading accuracy
www.flukecal.eu/6532
(0.008 % optional)
• 100 kPa (10 psi) to 70 MPa
(10 k psi) in a single instrument
• Integrated pressure generation
and control is standard
• Accredited calibration
www.flukecal.eu/P3220
Pressure Calibration
15
Temperature
Calibration
16
Temperature Calibration
712
9142/9143/9144
Handheld
Temperature
Calibrators
Suitable for calibrating
temperature transmitters,
panel meters, and other
devices that connect to
temperature sensors.
712 RTD Process Calibrator
714
Delivers outstanding performance,
durability and reliability in a
compact, lightweight, and easyto-carry tool.
• Measure temperature from RTD
probe output
• Simulate RTD output
• Measure additional RTDs using
ohms measurement function
• Simulate additional RTDs using
ohms source function
• NIST traceable calibration
www.fluke.com/712
Fast, lightweight and
portable with precision
temperature control
traceable to national
standards. Suitable for
calibration of thermocouples,
RTDs, PRTs, and other
temperature sensors.
9142 Field Metrology Well
Maximizing portability, speed,
and functionality for the industrial process environment.
• –25 °C to 150 °C temperature
range
• Display accuracy of ± 0.2 °C
over full range
• Built-in two-channel readout
for PRT, RTD, thermocouple,
4-20 mA current
•Optional built-in reference
thermometer readout
• Accredited calibration
www.flukecal.eu/9142
9143 Field Metrology Well
Delivers outstanding performance,
durability and reliability in a
compact, lightweight, and easyto-carry device.
• Measure temperature from TC
probe output
• Simulate TC output
• Calibrate linear TC transmitter
with mV source function
• NIST traceable calibration
Maximizing portability, speed,
and functionality for the industrial process environment.
• 33 °C to 350 °C temperature
range
• Display accuracy of ± 0.2 °C
over full range
• Built-in two-channel readout
for PRT, RTD, thermocouple,
4-20 mA current
• Optional built-in reference
thermometer readout
• Accredited calibration
www.fluke.com/714
www.flukecal.eu/9143
724 Temperature Calibrator
9144 Field Metrology Well
Powerful and easy to use to
measure and source functions for
testing and calibrating almost any
temperature instrument.
• Measure RTDs, thermocouples,
ohms, and volts to test sensors
and transmitters
• Source/simulate thermocouples,
RTDs, volts, and ohms to calibrate transmitters
• Perform fast linearity tests with
25 % and 100 % steps
• NIST traceable calibration
Precision calibration with fast
temperature ramp-up rates for the
industrial process environment.
• 50 °C to 660 °C temperature
range
• Heat to 660 °C in 15 minutes
• Display accuracy from
± 0.35 °C at 420 °C to
± 0.5 °C at ± 660 °C
• Optional built-in reference
thermometer readout
• Accredited calibration
714 Thermocouple
Calibrator
724
Multifunction
Field Temperature
Sources
www.flukecal.eu/9144
www.fluke.com/712
Temperature Calibration
17
9100S
9102S
9103/9140/9141
Field Temperature Sources
Portable and flexible temperature-controlled dry-wells
suitable for high-speed calibrations or certifications of
thermocouples, RTDs, PRTs and other temperature sensors
9009
9100S Handheld Dry-Well
9140 Field Dry-Well
www.flukecal.eu/9100S
Lightweight and portable field
dry-well small enough to easily
carry in one hand.
• 35 °C to 350 °C
• Accuracy to ± 0.5 °C
• Stability to ± 0.03 °C at 50 °C
and ± 0.05 °C at 350 °C
• NIST traceable calibration
World’s smallest, lightest and
most portable dry-well.
• Smallest dry-wells in the world
• Ranges from 35 °C to 375 °C
• Accuracy to ± 0.25 °C, stability
of ± 0.07 °C at 50 °C
• NIST traceable calibration
9102S Handheld Dry-Well
High-performance, convenient and
easy-to-use handheld dry-well.
• Smallest dry-wells in the world
• Ranges from –10 °C to 122 °C
• Accuracy to ± 0.25 °C, stability
of ± 0.05 °C (full range)
• NIST traceable calibration
www.flukecal.eu/9102S
9190A
9009 Dual-Well Dry-Well
Two-in-one dry-well increases
portability and productivity.
• Temperatures from –15 °C to
350 °C in one unit
• Display accuracy: hot block:
± 0.6 °C; cold block: ±0.2 °C
• Rugged, lightweight, water
resistant enclosure
• NIST traceable calibration
www.flukecal.eu/9009
9103 Field Dry-Well
Great performance in a portable
instrument.
• –25 °C to 140 °C
• Accuracy to ± 0.25 °C
• Stable to ± 0.02 °C at –25 °C
and ± 0.04 °C at 140 °C
• NIST traceable calibration
www.flukecal.eu/9103
18
Temperature Calibration
www.flukecal.eu/9140
9141 Field Dry-Well
Ultra-fast heat and cool times
increase productivity.
• 50 °C to 650 °C
• Accuracy to ± 0.5 °C to 400 °C;
± 1.0 °C to 650 °C
• Heats up to 650 °C in only
12 minutes
• NIST traceable calibration
www.flukecal.eu/9141
9190A Ultra-Cool Field
Metrology Well
Very low temperatures, with no
fluids and best-in-class stability
• Wide temperature range from
–95 °C to 140 °C
• Best-in-class stability:
± 0.015 °C full range
• Accuracy using built-in reference thermometer readout:
± 0.05 °C full range
• Display accuracy: ± 0.2 °C
full range
• Optional built-in two-channel
readout for PRT, RTC, TC, 4-20
mA and reference thermometer
• Accredited calibration
www.flukecal.eu/9190A
9150
9150 Thermocouple Furnace
Convenient, portable
thermocouple furnace.
• 150 °C to 1200 °C
• Stability of ± 0.5 °C over full
range
• NIST-traceable calibration
included
• RS-232 port standard
• NIST traceable calibration
www.flukecal.eu/9150
6102/7102/7103
Micro-Baths
Calibrate a variety of probe diameters—no sleeves required.
• Three models covering temperatures from –30 °C to 200 °C
• World’s smallest portable
calibration baths
• Stability to ± 0.015 °C
• NIST traceable calibration
www.flukecal.eu/micro-baths
6102/7102/7103
9170/9171/9172/9173
Infrared
Temperature
Sources
Bench and field precision
infrared calibrators
for accurate and
reliable calibrations of
IR thermometers.
4180/4181
4180/4181 Precision
Infrared Calibrators
Accredited performance for point
and shoot calibrations.
• Calibrated radiometrically for
meaningful, consistent results
• Accredited calibration included
• Accurate, reliable performance
from –15 °C to 500 °C
• Large 152 mm (6 in) diameter
target
• Accredited radiometric
calibration report
9132
www.flukecal.eu/418X
9170/9171/9172/9173
Metrology Wells
Best possible accuracy in a
dry-block calibrator
• Best performing industrial temperature sources in the world
(stability as good as ±0.005 °C)
• Immersion depth to 203 mm
(8 in)
• Optional built-in readout reads
reference PRTs to ± 0.006 °C
•Ranges:
- 9170: –45 °C to 140 °C
- 9171: –30 °C to 155 °C
- 9172: 35 °C to 425 °C
- 9173: 50 °C to 700 °C
• NVLAP accredited calibration
ONLY with -R model
9132/9133 Field
Infrared Calibrators
Precision when you need it for
infrared temperature calibration.
• Verify IR pyrometers from
–30 °C to 500 °C
(–22 °F to 932 °F)
• RTD reference well for contact
temperature measurement
• NIST traceable contact
calibration
9133
www.flukecal.eu/913X
www.flukecal.eu/917X
Temperature Calibration
19
Thermometer
Standards
Delivering exceptional
accuracy, wide measurement
range, and designed to
go where you work.
1551A Ex/1552A Ex “Stik”
Thermometer
1551A Ex/1552A Ex
The best substitute for
precision mercury-filled
glass thermometers.
• Accuracy of ± 0.05 °C
(± 0.09 °F) over full range
• Intrinsically safe (ATEX and
IECEx compliant)
• Two models to choose from
(-50 °C to 160 °C or -80 °C to
300 °C)
• NVLAP-accredited, NIST-traceable calibration
www.flukecal.eu/155X
1523/1524
1502A/1504
1523/1524 Handheld
Thermometer Readout
Measure, graph and record three
sensor types with one tool.
• High accuracy: PRTs:
± 0.011 °C; Thermocouples:
± 0.24 °C; Thermistors:
± 0.002 °C
• A simple user interface to see
trends quickly
• Smart connectors to load probe
information automatically
• Traceable cal as standard. -CAL
versions with accredited cal
www.flukecal.eu/152X
1502A/1504 Thermometer
Readouts
1529
Best performance thermometers in
their price range.
• Single-channel reference
thermometers, accurate to
±0.006 °C (meter only)
• Two models to choose from—
reading PRTs or thermistors
• Best price/performance package
• Accredited calibration
www.flukecal.eu/150X
1529 Four-Channel
Thermometer Readout
1620A
20
Temperature Calibration
Lab-quality accuracy on four
channels for PRTs, thermistors
and thermocouples.
• Accuracy of ±0.0025 °C
(meter only)
• Displays eight user-selected
data fields from any channel
• Logs up to 8,000 readings with
date and time stamps
• Accredited calibration
www.flukecal.eu/1529
Ambient Conditions
Monitor
For precise measurement
and recording of ambient
temperature and humidity
conditions wherever
calibrations take place.
1620A Precision
Thermo-Hygrometer
The most accurate temperature
and humidity graphical data
logger on the market.
• Superior accuracy
• Network enabled
• Powerful logging and
analysis tools
• Measures temperature to
± 0.125 °C and humidity to
± 1.5 % on two channels
• NIST-traceable NVLAP
accredited temperature and
humidity calibration
www.flukecal.eu/1620A
Precision PRTs
High accuracy reference
temperature measurements
in temperature sources on
the bench or in the field.
5627A Precision
Industrial PRT
5627A
5615
• Vibration and shock resistant
• Calibration accuracy of
± 0.046 °C at 0 °C
• Available with a 90° bend
• NVLAP-accredited calibration
included, lab code 200706-0
www.flukecal.eu/5627
5608/5609/5609-BND
5615 Secondary Reference
Temperature Standards
• –200 °C to 420 °C
• Calibrated accuracy ± 0.010 °C
at 0 °C
• NVLAP-accredited calibration
included, lab code 200706-0
www.flukecal.eu/5615
5608/5609/5609-BND
Secondary Reference PRTs
5622
Drift rate of ± 0.01 °C at 0 °C after
100 hours at max temperature.
• 5608: –200 °C to 500 °C
(80 mm minimum immersion)
• 5609: –200 °C to 670 °C
(100 mm minimum immersion)
• Comes with certificate of
compliance - optional NVLAPaccredited calibration
www.flukecal.eu/5608
5626/5628
5618B
5622 Fast Response PRTs
•T ime constants as fast as
0.4 seconds
•Small probe diameters ranging
from 0.5 mm to 3.2 mm (four
models available)
•Available as DIN/IEC Class A
PRTs or with optional NVLAPaccredited calibration, lab code
200348-0
5606
5618B Small Diameter
Industrial RTD
Fast response for time-dependent
measurements.
• Small diameter sheath, 3.2 mm
(0.125 in)
• Excellent stability
• Includes ITS-90 coefficients
• NVLAP accredited calibration,
lab code 200706-0
www.flukecal.eu/5618B
5606 Full Immersion PRT
Fully immerse PRT transition
junction inside freezers or
furnaces.
• Transition junction designed
to withstand full temperature
range of probe
• -200 °C to 160 °C
• Calibration accuracy of
± 0.05 °C (full range)
• Optional NVLAP accredited
calibration
www.flukecal.eu/5606
Thermistors
Providing accurate and
rugged temperature
measurements from
0 °C to 100 °C.
5610/5611/5611T
Secondary Reference
Thermistor Probes
Economical lab-grade thermistor probes with low drift
susceptibility.
• Short-term accuracy to
± 0.01 °C; one-year drift
< ± 0.01 °C
• 5610: 3.2 mm diameter stainless steel sheathed thermistor
• 5611: 1.5 mm diameter (tip)
silicone coated thermistor
• 5611T: 3 mm diameter (tip)
PTFE encapsulated thermistor
www.flukecal.eu/5610
www.flukecal.eu/5622
5626/5628 Secondary SPRT,
PRT, Temperature Sensors
5610
5611
•Range to 661°C
• Meets all ITS-90 requirements
for resistance ratios
• Rtp drift < 20 mK after 500
hours at 661°C
• Calibrated accuracy of ± 0.006
°C at 0 °C
• NVLAP accredited fixed point
calibration
5611T
www.flukecal.eu/5622
Temperature Calibration
21
Software/
Accessories
22
Software/Accessories
Software
750 SW DPC/TRACK2
Software™
DPC/TRACK2 Software is a
specialized calibration management database that can help you
manage your instrumentation
and address the documentation
requirements of quality programs
and regulations. With DPC/TRACK2
and a 754 DPC you can:
• Manage your inventory of tags
and instruments, schedule for
calibration
• Create tag specific procedures
with instructions and comment
• Load those procedures to your
DPC, and later upload the
results to your PC
• Select and execute automated
as found/as left procedures in
the field, automatically capturing results
• Examine the calibration
histories of your tags and
instruments and print reports
• Import and export instrument
data and procedures as ASCII
text
• Import legacy DPC/TRACK data
www.fluke.com/750DPCsoftware
700G/Track
Easy-to-use software for managing
instruments and calibration data.
• Enables data download and
logging configurations to
the 700G Series gauges for a
remote logging event
• Configure logging event reading
rate, duration and measurement
units
• Upload measurements logged
remotely and display or export
measurements
www.fluke.com/700Gsoftware
LogWare
Turn a Fluke Calibration singlechannel handheld or 1502A/1504
readout into a real-time data
logger.
• Collects realtime data
• Calculates statistics and
displays customizable graphs
• Allows user-selected start
times, stop times and sample
intervals
MET/TEAM® Test Equipment
Asset Management Software
Manage more workload with
less work.
• Browser-based calibration asset
management software
• Fully integrated with MET/CAL®
Software
• Microsoft SQL Server database
• Highly customizable
• Email automation
• On-site calibration
700HTP-2
www.flukecal.eu/METTEAM
Accessories
700HTP-2 Hydraulic
Test Pump
The 700HTP-2 is designed
to generate pressures up to
10,000 psi/700 bar. Use the
Fluke 700PRV-1 adjustable relief
valves to limit pressures from
1360 psi to 5450 psi. Use the
700HTH-1 test hose to connect
from the pump to the device
under test.
700PTP-1
www.fluke.com/process_acc
700PTP-1 Pneumatic
Test Pump
The 700PTP-1 is a handheld
pressure pump designed to
generate either vacuum to
-11.6 psi/-0.8 bar or pressure
to 600 psi/40 bar.
700LTP-1
www.fluke.com/process_acc
700LTP-1 Low Pressure
Test Pump
Hand operated pressure pump
designed to generate either
vacuum to -13 psi/-.90 bar or
pressures to 100 psi/6.9 bar. Ideal
for low pressure applications
requiring accurate low pressure
testing.
www.fluke.com/process_acc
www.flukecal.eu/logware
Software/Accessories
23
Fluke. The Most Trusted Tools in the World.
Fluke Corporation
PO Box 9090,
Everett, WA 98206 U.S.A.
Fluke Europe B.V.
PO Box 1186, 5602 BD
Eindhoven, The Netherlands
For more information call:
In the U.S.A. (800) 443-5853 or Fax (425) 446-5116
In Europe/M-East/Africa +31 (0) 40 2675 200 or Fax +31 (0) 40 2675 222
In Canada (800)-36-FLUKE or Fax (905) 890-6866
From other countries +1 (425) 446-5500 or Fax +1 (425) 446-5116
Web access: www.flukecal.eu
©2012-2013 Fluke Corporation. Specifications subject to change without notice.
Printed in the Netherlands 12/2013. Pub-ID 12146-eng
Modification of this document is not permitted without written permission from
Fluke Corporation.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising