DATA SHEET SE5516A: Dual-Band 802.11a/g/n/ac Wireless LAN

DATA SHEET SE5516A: Dual-Band 802.11a/g/n/ac Wireless LAN
DATA SHEET
SE5516A: Dual-Band 802.11a/g/n/ac Wireless LAN Front-End
Preliminary
Applications
Product Description






The SE5516A is a complete 802.11a/b/g/n/ac WLAN
RF front-end module providing all the functionality of
the power amplifiers, filtering, power detector, T/R
switch, diplexers and associated matching. The
SE5516A provides a complete 2.4 GHz and 5 GHz
WLAN RF solution from the output of the transceiver
to the antenna in an ultra compact form factor. Design
to meet stringent linearity conditions of 802.11ac
standard, the SE5516A delivers < 2% EVM at rated
AC power.
IEEE802.11b DSSS WLAN
IEEE802.11g OFDM WLAN
IEEE802.11a OFDM WLAN
IEEE802.11n WLAN
IEEE802.11ac WLAN
Access Points, PCMCIA, PC cards
Features











All RF ports matched to 50 Ω
Integrated 2.4 GHz PA, 5 GHz PA, TX Filter, T/R
switches and diplexers
Integrated Power Detector for each TX Chain
21 dBm Power, 802.11b, 11 mbps
18 dBm @ 3.0 % EVM, 802.11n, 64QAM, 2G
16 dBm @ 3.0 % EVM, 802.11n, 64QAM, 5G
16 dBm @ 1.8 % EVM, 802.11ac, 256QAM, 2G
13 dBm @ 1.8 % EVM, 802.11ac, 256QAM, 5G
Single supply voltage: 3.3 V ± 10 %
Lead free, Halogen free, RoHS compliant,
o
MSL3/240 C
4mm x 4mm x 1.0mm, LGA Package
Designed for ease of use, all RF ports are matched to
50 Ω to simplify PCB layout and the interface to the
transceiver RFIC. The SE5516A also includes a
transmitter power detector with 20 dB of dynamic
range for each transmit chain. Each power amplifier
has a separate digital enable control for transmitter
on/off control. The PA Enable rise/fall time is less than
0.4 μsec.
The device also provides a notch filter from 3.2603.267 GHz and 3.28-3.89 GHz prior to the input of
each 2.4 GHz and 5 GHz power amplifiers,
respectively.
The SE5516A packaged in 4mm x 4mm x 1.0mm,
Halogen free, Lead free, ROHS compliant, MSL 3
LGA package.
Ordering Information
Part No.
Package
Remark
SE5516A
SE5516A-R
SE5516A-EK1
24 pin LGA
24 pin LGA
N/A
Samples
Tape & Reel
Evaluation kit
Functional Block Diagram
TXg and TXa include an ESD Shunt Inductor to Ground. External DC blocking recommended
Figure 1: SE5516A Functional Block Diagram
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
202396A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012
1
DATA SHEET
SE5516A: Dual-Band 802.11a/g/n/ac Wireless LAN Front-End
Preliminary
Figure 2: SE5516A Pin Out (Top View Through Package)
Pin Out Description
Pin No.
Name
1
2
3
4
5
6
7
8
9
10
11
12
ENg
GND
GND
Ant
GND
C1
C0
GND
VCC
VCC
GND
GND
Description
2.4 GHz Power Amplifier Enable
Ground
Ground
Antenna
Ground
Switch Control
Switch Control
Ground
Supply Voltage
Supply Voltage
Ground
Ground
Pin No.
Name
13
14
15
16
17
18
19
20
21
22
23
24
Tg
GND
Rg
Ra
GND
Ta
ENa
VCC
VCC
DET
GND
GND
Description
2GHz Transmit RF Input
Ground
2GHz Receive RF Output
5GHz Receive RF Output
Ground
5GHz Transmit RF Input
5GHz Power Amplifier Enable
Supply Voltage
Supply Voltage
2/5GHz Power Detector Output
Ground
Ground
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
202396A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012
2
DATA SHEET
SE5516A: Dual-Band 802.11a/g/n/ac Wireless LAN Front-End
Preliminary
Absolute Maximum Ratings
These are stress ratings only. Exposure to stresses beyond these maximum ratings may cause permanent damage
to, or affect the reliability of the device. Avoid operating the device outside the recommended operating conditions
defined below. This device is ESD sensitive. Handling and assembly of this device should be at ESD protected
workstations.
Symbol
Definition
Min.
Max.
Unit
VCC
Supply Voltage
-0.3
3.6
V
PU
PA Enable pins: ENa, ENg
-0.3
3.6
V
-
12.0
dBm
Operating Temperature Range
-40
85
°C
Storage Temperature Range
-40
150
°C
1.5
KV
1.0
KV
TXRF
TA
TSTG
Max power input to Ta, Tg, with ANT terminated in
6:1 load or better
ESD ANT
JEDEC JESD22-A114 ANT pin zap to ground
(With 220pF blocking capacitor on the ANT trace)
ESD HBM
JEDEC JESD22-A114 all pins
-
Recommended Operating Conditions
Symbol
Parameter
Min.
Typ.
Max.
Unit
VCC
Supply Voltage
3.0
3.3
3.6
V
TA
Ambient Temperature
-40
25
85
°C
DC Electrical Characteristics
Conditions: VCC = 3.3 V, TA = 25 °C, as measured on Skyworks’ SE5516A-EK1 evaluation board, all unused ports
terminated with 50 ohms, unless otherwise noted
Symbol
Parameter
Conditions
Min.
Typ.
Max.
Unit
ICQ-A
Total 802.11a Transmit Supply Current
No RF
-
175
-
mA
ICQ-G
Total 802.11g Transmit Supply Current
No RF
-
135
-
mA
ICC-G
Total 802.11g Transmit Supply Current
POUT = 18 dBm, 54 Mbps
OFDM signal, 64 QAM
-
185
200
mA
ICC-B
Total 802.11b Transmit Supply Current
POUT = 21 dBm, 11 Mbps
CCK signal, BT = 0.45,
-
205
220
mA
ICC-A
Total 802.11a Transmit Supply Current
POUT = 16 dBm, 54 Mbps
OFDM signal, 64 QAM,
-
220
250
mA
ICC-AC2G
Total 802.11ac Transmit Supply Current 2G
POUT = 16 dBm, 256
QAM,MCS9, 40Mhz
-
155
165
mA
ICC-AC5G
Total 802.11ac Transmit Supply Current 5G
POUT = 13 dBm, 256
QAM,MCS9, 80Mhz
-
190
210
mA
ICC-RX2
Total Receive Supply Current 2G
Eng=Ena=0V, LNA on
Switch condition 1
-
-
12
mA
ICC-RX5
Total Receive Supply Current 5G
Eng=Ena=0V, LNA on
Switch condition 4
-
-
12
mA
ICC_OFF
Total Supply Current
No RF, ENg = ENa = 0 V
Switch condition 3 or 6
-
65
200
μA
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
202396A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012
3
DATA SHEET
SE5516A: Dual-Band 802.11a/g/n/ac Wireless LAN Front-End
Preliminary
Logic Characteristics
Conditions: VCC = 3.3 V, TA = 25 °C, as measured on Skyworks’ SE5516A-EK1 evaluation board (de-embedded to
device), all unused ports terminated with 50 ohms, unless otherwise noted.
Symbol
Parameter
Conditions
Min.
Typ.
Max.
Unit
VENH
Logic High Voltage for ENg,
ENa (Module On)
-
1.8
-
VCC
V
VENL
Logic Low Voltage ENg,
ENa (Module Off)
-
0
-
0.5
V
IENH
Input Current Logic High
Voltage (ENg, ENa)
-
-
350
400
μA
IENL
Input Current Logic Low
Voltage (ENg, ENa)
-
-
0.2
-
μA
Switch Characteristics
Conditions: VCC = VEN = 3.3 V, TA = 25 °C, as measured on Skyworks’ SE5516A-EK1 evaluation board (deembedded to device), all unused ports terminated with 50 ohms, unless otherwise noted.
Symbol
Parameter
Conditions
Min.
Typ.
Max.
Unit
VCTL_ON
Control Voltage
(On State)
-
3.0
-
3.6
V
VCTL_OFF
Control Voltage
(OFF State)
-
0.0
-
0.2
V
SW ON
Low Loss Switch
Control Voltage
High State = VCTL_ON VCTL_OFF
2.8
-
VCC
V
SW OFF
High Loss Switch
Control Voltage
Low State = VCTL_OFF VCTL_OFF
0
-
0.3
V
ICTL_ON
Switch Control Bias
Current (RF Applied)
On pin (C0, C1) being
driven high. RF Applied
-
-
100
µA
ICTL_ON
Switch Control Bias
Current (No RF)
On pin (C0, C1) being
driven high. No RF
-
-
30
µA
-
-
100
pF
CCTL
Control Input
Capacitance
-
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
202396A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012
4
DATA SHEET
SE5516A: Dual-Band 802.11a/g/n/ac Wireless LAN Front-End
Preliminary
Switch Control Logic Table
Logic
State
Condition
C0
C1
ENa
Eng
SP3T
LNA
Bypass
1
0
1
0
0
RXg
RXg_EN
Open
2
0
0
0
1
TX
RXg_OFF
RXg_Bypass
3
0
0
0
0
RXg
RXg_OFF
RXg_Bypass
4
1
1
0
0
RXa
RXa_EN
Open
5
1
0
1
0
TX
RXa_OFF
RXa_Bypass
6
1
0
0
0
RXa
RXa_OFF
RXa_Bypass
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
202396A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012
5
DATA SHEET
SE5516A: Dual-Band 802.11a/g/n/ac Wireless LAN Front-End
Preliminary
2.4 GHz AC Electrical Characteristics
2.4 GHz Transmit Characteristics
Conditions: VCC = 3.3 V, ENg = C0 = 3.3 V, ENa = C1 = 0 V, TA = 25 °C, as measured on Skyworks’ SE5516A-EK1
evaluation board, all unused ports terminated with 50 ohms, unless otherwise noted.
Symbol
FIN
P802.11g
P802.11n
P802.11ac
P802.11b
Parameter
Condition
Min.
Typ.
-
2400
-
2500
MHz
54 Mbps OFDM signal, 64QAM,
DEVM = 3.0 %,
input signal EVM < 1%
802.11g mask compliant
-
18
-
dBm
OFDM signal, MCS7, HT40,
DEVM = 3%
802.11n mask compliant
+ 11MHz offset, RBW=100KHz,
VBW=30KHz
-
18
-
DEVM = 2.5%
-
17
-
40 MHz 256 QAM, MCS9
DEVM= 1.8%
ac mask compliant
-
16
-
DEVM = 1.4%
-
15
-
21
22
-
dBm
Frequency Range
Output power
Output power
Output power
Output power
11 Mbps CCK signal, BT = 0.45
ACPR(± 11MHz offset) < -35
ACPR(± 22MHz offset) < -56
Max.
Unit
dBm
dBm
P1dB
P1dB
-
24
24.5
-
dBm
S21
Small Signal Gain
-
25
-
30
dB
Small Signal Gain
Variation Over Band
-
-
1.0
2.0
dB
ΔS21
S211.6
Gain at ½Ref-VCO
1640.00 to 1942.00 MHz
-
12
20
dB
S213.2
Gain at Ref-VCO
3216.00 to 3312.00 MHz
-
-
0
dB
Pout ≤ 21 dBm, 1Mbps, CCK
-
-
-45.2
2f,3f
Harmonics
Pout ≤ 18 dBm, 802.11gn, all
data rates
-
-
-50.0
tdr, tdf
Delay and rise/fall
Time
50 % of VEN edge and 90/10 %
of final output power level
-
0.2
0.4
μs
S11
Input Return Loss
-
-
7
-
dB
S22
Output Return Loss
-
-
10
-
dB
STAB
Ru
Stability
CW, POUT = 21 dBm
0.1 GHz – 21 GHz
Load VSWR = 6:1
Ruggedness
Tg = 12dBm, ANT load varies
over 6:1 VSWR
dBm/MHz
All non-harmonically related outputs less
than -42 dBm/MHz
No Irreversible damage
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
202396A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012
6
DATA SHEET
SE5516A: Dual-Band 802.11a/g/n/ac Wireless LAN Front-End
Preliminary
2.4 GHz Receive Characteristics
Conditions: VCC = 3.3 V, Switch Condition 1, TA = 25 °C, as measured on Skyworks’ SE5516A-EK1 evaluation
board, all unused ports terminated with 50 ohms, unless otherwise noted.
Symbol
FOUT
Parameter
Frequency Range
Condition
Min.
Typ.
Max.
-
2400
-
2500
Unit
MHz
Receive Gain, LNA Enabled.
2400 – 2485 MHz
Switch Condition 1
10
13
16
Receive Gain, Bypass mode
LNA bypassed
Switch Condition 3
-9.5
-8.5
-7.5
High Band Gain
@5150-5850MHz
Switch Condition 1
-
-17
-
Gain Variation
2400 – 2485 MHz, Over any
40MHz band
-
0.25
0.5
dB
NF
Noise Figure
De-embedded to device
-
2.5
2.8
dB
S11
Input Return Loss
-
5
10
-
dB
S22
Output Return Loss
-
8
10
-
dB
S21
ΔS21
dB
IP1dB
Input P1dB
LNA enabled
Switch Condition 1
-
-7
-
dBm
IP1dB
Input P1dB
LNA bypassed
Switch Condition 3
-
8
-
dBm
Loop Back Isolation
(ANT – RXg)
Switch Condition 2,
Pout = Psat
Psat+10
39
-
dB
Enable Time
RXg LNA_ON ⇄ LNA_Bypass
-
-
0.2
From C0 = 50% to RX RF
power to 90% of transition
TX ⇄ RXg, RXa ⇄ RXg
-
0.6
1.0
LB
TEN
usec
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
202396A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012
7
DATA SHEET
SE5516A: Dual-Band 802.11a/g/n/ac Wireless LAN Front-End
Preliminary
5 GHz AC Electrical Characteristics
5 GHz Transmit Characteristics
Conditions: VCC = 3.3 V, ENa = C0 = 3.3 V, ENg = C1 = 0 V, TA = 25 °C, as measured on Skyworks’ SE5516A-EK1
evaluation board, all unused ports terminated with 50 ohms, unless otherwise noted.
Symbol
FIN
Parameter
Condition
Min.
Typ.
-
4900
-
5900
802.11n mask compliant
+ 11MHz offset,
RBW=100KHz, VBW=30KHz
-
16
-
DEVM = 2.0%
-
15
-
Input signal EVM < 0.6%
802.1111ac mask compliant
-
13
-
DEVM = 1.4%
-
12
-
21
22.5
-
In Band
25
-
31
1.9GHz
-
-
-20
3.9GHz
-
-
4
Small Signal Gain Variation Over 80 MHz Channel
-1
-
1
dB
4.9 – 5.18 GHz
Small Signal Gain
5.18 – 5.50 GHz
Variation Over sub-bands
5.50 – 5.90 GHz
-
2
3
dB
-
-
-45
dB
-
-
-50
dBm/MHz
-
0.2
0.4
μs
Frequency Range
Max.
Unit
MHz
OFDM signal, MCS7, HT40,
DEVM = 3%
P802.11n
Output Power
dBm
80Mhz , 256 QAM, MCS9
DEVM = 1.8 %
P802.11ac
P1dB
S21
ΔS21
Output Power
P1dB
-
Small Signal Gain
S12
-
2f,3f
Harmonics @18dBm,
54Mbps, 802.11a
tdr, tdf
Delay and rise/fall Time
Switch State 5,
4.9 – 5.9 GHz
50 % of VEN edge and 90/10 %
of final output power level
dBm
dBm
dB
S11
Input Return Loss
-
-
10
-
dB
S22
Output Return Loss
-
-
10
-
dB
STAB
Ru
Stability
64 QAM, POUT = 16 dBm
0.1 GHz – 21 GHz
Load VSWR = 6:1
Ruggedness
TXa = 12dBm, ANT load varies
over 6:1 VSWR
All non-harmonically related outputs less
than -42 dBm/MHz
No Irreversible damage
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
202396A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012
8
DATA SHEET
SE5516A: Dual-Band 802.11a/g/n/ac Wireless LAN Front-End
Preliminary
5 GHz Receive Characteristics
Conditions: VCC = 3.3 V, Switch Condition 4, TA = 25 °C, as measured on Skyworks’ SE5516A-EK1 evaluation
board, all unused ports terminated with 50 ohms, unless otherwise noted.
Symbol
FOUT
S21
ΔS21
Parameter
Frequency Range
Condition
Min.
Typ.
Max.
-
4900
-
5850
Receive Gain
4900 – 5850 MHz
Switch Condition 4
10
12
14
Receive Gain,
Bypass mode
LNA bypassed
Switch Condition 6
-10
-9
-8
Low Band Gain
@2400-2500MHz
Switch Condition 4
-
-28
-
-0.5
-
0.5
Gain Variation
4900 – 5850 MHz,
Over any 80MHz band
Unit
MHz
dB
dB
Over Entire band
-1
-
+1
De-embedded to device
-
2.8
3.0
dB
NF
Noise Figure
S11
Input Return Loss
-
8
10
-
dB
S22
Output Return Loss
-
6
10
-
dB
IP1dB
Input P1dB
LNA enabled
Switch Condition 4
-6
-
-
dBm
IP1dB
Input P1dB
LNA bypassed
Switch Condition 6
6
-
-
dBm
Loop Back Isolation
(TXa – RXa)
Switch Condition 5,
Pout = Psat
-
33
-
dB
Enable Time
RXa LNA_ON ⇄
LNA_Bypass
-
-
0.2
TX ⇄ RXa, RXa ⇄ RXg
-
LB
TEN
From C0 = 50% to
RX RF power to
90% of transition
usec
0.6
1.0
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
202396A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012
9
DATA SHEET
SE5516A: Dual-Band 802.11a/g/n/ac Wireless LAN Front-End
Preliminary
2.4 GHz Power Detector Characteristic
Conditions: VCC = 3.3 V, Switch Condition 2, TA = 25 °C, as measured on Skyworks’ SE5516A-EK1 evaluation
board, all unused ports terminated with 50 Ω, unless otherwise noted.
Symbol
Parameter
FOUT
Frequency Range
PDR
Power detect range,
peak power
Condition
Min.
Typ.
-
2400
-
2500
MHz
0
-
22
dBm
-
2.3
-
KΩ
Measured at ANT
-
Max.
Unit
PDZOUT
DC Output impedance
PDVP21
Output Voltage, POUT =
21dBm
Measured into 26.5KΩ
-
0.80
-
V
PDVp18
Output Voltage, POUT =
18dBm
Measured into 26.5KΩ
-
0.60
-
V
PDVpnoRF
Output Voltage, POUT =
No RF
Measured into 26.5KΩ
-
0.20
-
V
LPF-3dB
Power detect low pass
filter -3dB corner
frequency
Measured into 26.5KΩ
35
-
-
MHz
PDetacc
Power Detector
Accuracy
Measured into 3:1 load at
ANT port
-1.5
-
+1.5
dB
2.5GHz Power Detector Response into 26.5Kohm Load
Pdet2400
Pdet2450
Pdet2500
1.2
1.0
Pdet(V)
0.8
0.6
0.4
0.2
0.0
3
5
7
9
11
13
15
17
19
21
23
Pout(dBm)
Figure 3: SE5516A Power Detector vs. Output Power over Frequency (CW Signal)
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
202396A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012
10
DATA SHEET
SE5516A: Dual-Band 802.11a/g/n/ac Wireless LAN Front-End
Preliminary
5 GHz Power Detector Characteristic
Conditions: VCC = 3.3 V, Switch Condition 5, TA = 25 °C, as measured on Skyworks’ SE5516A-EK1 evaluation
board, all unused ports terminated with 50 Ω, unless otherwise noted.
Symbol
Parameter
FOUT
Frequency Range
PDR
Power detect range,
peak power
Condition
Min.
Typ.
-
4900
-
5900
MHz
0
-
21
dBm
-
26.5
-
KΩ
Measured at ANT
-
Max.
Unit
PDZOUT
DC Output impedance
PDVp18
Output Voltage, POUT =
18dBm
Measured into 26.5KΩ
-
0.70
-
V
PDVp16
Output Voltage, POUT =
16dBm
Measured into 26.5KΩ
-
0.6
-
V
PDVNoRF
Output Voltage, POUT =
No RF
Measured into 26.5KΩ
-
0.20
-
V
LPF-3dB
Power detect low pass
filter -3dB corner
frequency
Measured into 26.5KΩ
35
-
-
MHz
PDetacc
Power Detector
Accuracy
Measured into 3:1 load at
ANT port
-1.5
-
1.5
dB
5GHz Power Detector Response into 26.5Kohm Load
Pdet4900
Pdet5090
Pdet5280
Pdet5470
Pdet5660
Pdet5850
1.2
1.0
Pdet(V)
0.8
0.6
0.4
0.2
0.0
3
5
7
9
11
13
15
17
19
21
23
Pout(dBm)
Figure 4: Preliminary SE5516A Power Detector vs. Output Power over Frequency (CW Signal)
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
202396A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012
11
DATA SHEET
SE5516A: Dual-Band 802.11a/g/n/ac Wireless LAN Front-End
Preliminary
Package Drawing
24
23
22
21
20
19
19
20
21
22
23
24
1
18
18
1
2
17
17
2
3
16
16
3
4
15
15
4
5
14
14
5
6
13
13
6
7
8
9
10
11
12
12
11
10
9
8
7
TOP SIDE
BOTTOM SIDE
PIN TABLE
PIN
NAME
PIN
NAME
Figure 5: Package Drawing: Topside
Recommended Land and Solder Patterns
Figure 6: Recommended Land and Solder Patterns
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
202396A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012
12
DATA SHEET
SE5516A: Dual-Band 802.11a/g/n/ac Wireless LAN Front-End
Preliminary
Package Handling Information
Because of its sensitivity to moisture absorption, instructions on the shipping container label must be followed
regarding exposure to moisture after the container seal is broken, otherwise, problems related to moisture absorption
may occur when the part is subjected to high temperature during solder assembly. The SE5516A is capable of
withstanding a Pb free solder reflow. Care must be taken when attaching this product, whether it is done manually or
in a production solder reflow environment. If the part is manually attached, precaution should be taken to insure that
the device is not subjected to temperatures above its rated peak temperature for an extended period of time. For
details on both attachment techniques, precautions, and handling procedures recommended by Skyworks, please
refer to:
 Skyworks’ Application Note: “Land Grid Array Module Solder Reflow & Rework Information”, Document
Number QAD-00046.
 Skyworks’ Application Note: “Handling, Packing, Shipping and Use of Moisture Sensitive LGA”, Document
Number QAD-00047.
Caution! Class 1C ESD sensitive device
Product Branding
5516A
Figure 7: SE5516A Branding Information
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
202396A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012
13
DATA SHEET
SE5516A: Dual-Band 802.11a/g/n/ac Wireless LAN Front-End
Preliminary
Tape and Reel Information
Production quantities of this product are shipped in a standard tape-and-reel format.
dimensions and sizing is shown in Table 1 and Figure .
Parameter
Devices Per Reel
Reel Diameter
Specific tape and reel
Value
3000
13 inches
Table 1: Tape and Reel Dimensions
Figure 8: Detailed Tape and Reel Information (All diminensions in Millimeters)
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
202396A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012
14
DATA SHEET
SE5516A: Dual-Band 802.11a/g/n/ac Wireless LAN Front-End
Preliminary
Document Change History
Revision
Date
Notes
1.0
Mar-29-2011
Created
1.1
Apr-20-2011
Numerous updates to performance limits
1.2
Apr-26-2011
Update RX loop-back limits
Update detector bandwidth
1.3
Apr-30-2011
Updated RX Gain in Active and Bypass modes, both bands
1.4
Nov-22-2011
Update to DEVM
Update LNA gain at the opposite band (both bands)
Update Harmonics
Update loopback mode isolation (both bands)
1.5
May 15, 2012
Update to change header and footer to Skyworks.
Update current consumption, 2GHz TX gain, 2GHx RX EN time, detector
characteristics
1.6
Jun-7-2012
Add maximum solder profile temperature to features section
1.7
Aug-31-2012
Update gain and return loss specifications.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
202396A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012
15
DATA SHEET
SE5516A: Dual-Band 802.11a/g/n/ac Wireless LAN Front-End
Preliminary
Copyright © 2012 Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein,
are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or
omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time,
without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other
difficulties arising from any future changes.
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials,
products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in
Skyworks Terms and Conditions of Sale.
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE,
INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL
SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR
OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT,
INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE
MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to
personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to
fully indemnify Skyworks for any damages resulting from such improper use or sale.
Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or
operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks.
Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated
published specifications or parameters.
Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries.
Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions,
posted at www.skyworksinc.com, are incorporated by reference.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
202396A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 24, 2012
16
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement