advertisement
▼
Scroll to page 2
of 3
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
Frequently Answers and Questions
What dimensions should the panel cutout be to install the InView Display?
The panel cutout dimensions are 345.9 mm (13.62 in) wide, 173.0 mm (6.81 in) high, and 88.9 mm (3.50 in) deep.
What is the torque required to tighten the mounting nuts for the adapter plate and the display?
The mounting nuts should be tightened to a torque of 0.904 Nm (8 in-lb).
What is the NEMA rating of the InView Display when it is properly installed?
When properly installed, the InView Display provides a NEMA Type 12, 13, and 4X(indoor) rating.
How many mounting holes are there on the adapter plate and the display?
Both the adapter plate and the display have six mounting holes.
What size drill bit should be used to create the mounting holes?
A 0.25 in (6.35 mm) drill bit should be used to create the mounting holes.
advertisement