Comtrol RocketLinx ES8510-XTE Datasheet

Add to my manuals
2 Pages

advertisement

Comtrol RocketLinx ES8510-XTE Datasheet | Manualzz

RocketLinx

ES8510-XTE

Part Number: 32062-3

KEY FEATURES AND BENEFITS

::

• 7 10/100BASE-TX ports and 3 RJ45/SFP combo (10/100BASE-TX,

100BASE-FX)

• Enhanced redudancy featuring multiple redundant ring technology (recovery time <5ms)

• Non-blocking switching, 8K MAC address table, 32 Gbps switch fabric

• VLAN, GVRP, QoS, IGMP snooping V1/V2/V3, rate control, port trunking, LACP, online multi-port mirroring

• Management via console CLI , Web, SNMP V1/V2c/V3, RMON,

HTTPS, SSH and NetVision

• Advanced security feature supports IP security, port security,

DHCP server, IP and MAC binding, IEEE 802.1x network access control

• Event notification by e-mail, SNMP trap, syslog, digital input and relay output

• Rigid aluminum IP31 housing, excellent heat dispersion, redundant power, DIN rail/wall mount installation

• -40° to +74°C operating temperature for extreme environments

• NEMA TS2 Compliant

• IPV6 support

PRODUCT DESCRIPTION

::

The RocketLinx ES8510-XTE is a managed Industrial Ethernet

Switch, equipped with seven 10/100BASE-TX ports and three RJ45/

SFP combo (10/100BASE-TX, 100BASE-FX) ports. The three combo ports offer flexibility for additional fiber connections by plugging in different types of SFP modules, which can support distances of 2KM in Multi-Mode or 120KM in Single-Mode. The combo ports make port combination even easier, such as eight RJ ports and two fiber ports, or nine RJ ports and one fiber port.

The RocketLinx ES8510-XTE is housed in a rugged aluminum enclosure that features an excellent heat dispersing mechanical design and wide operating temperature support. The embedded software supports full Layer 2 management features, multi-form ring redundancy, network control, monitoring, security and notification. The RocketLinx ES8510-XTE also provides a built-in watchdog timer, digital input and relay output to avoid undetected problems. With industry leading managment features and rugged industrial design, the RocketLinx ES8510-XTE provides the perfect foundation for building your industrial Ethernet infrastructure.

Three RJ45/SFP Fast Ethernet Combo Ports for Flexible Network

Planning

The RocketLinx ES8510-XTE is designed with three combo Fast

Ethernet ports. Each combo port combines one Small Form-Factor

Pluggable (SFP) socket for 100Mbps Multi-Mode or Single-Mode SFP transceiver, as well as one RJ45 copper port in 10Mbps full-duplex,

100Mbps half /full-duplex link mode. The switch will automatically detect the priority of cable connections for each combo port. Users are able to connect two 100Mbps SFP ports of the ES8510-XTE for

Fast Ethernet fiber redundant ring topologies and the third combo port as a fiber uplink port.

100Mbps SFP

The RocketLinx ES8510-XTE SFP socket supports 100BASE-FX Single/

Multi-Mode transceivers. The available distance of the 100BASE-FX ranges from 2KM Multi-Mode to 120KM with Single-Mode modules.

NEMA

TS2

EXTENDED

TEMPERATURE

RATINGS

connect. communicate. control.

ROCKETLINX SPECIFICATIONS

::

HARDWARE

Network Interfaces

10/100BASE-TX, 100BASE-FX

Connector Types

Enclosure

RJ45, SFP

IP31 grade aluminum metal case

Installation Method DIN rail, wall mount

LED Indicators

Power 1, Power 2, Ring Master (R.M.), 10/100BASE-TX link/

activity, 10/100BASE-TX Full-Duplex/collision, copper/SFP

combo link activity, Digital Input 1&2, Digital Output 1&2

Digital Input (DI)

Two Digital Inputs, 4-Pin screw terminal block

Digital Output

Two Digital Outputs (Dry Relay Output), 4-Pin screw terminal

block

Serial Console Port

One RJ45 RS-232 (TXD, RXD, Signal GND), Baud Rate: 9600bps

Data Bits

Parity

Stop Bits

Flow Control

Dimensions

Product Weight

8

None

1

None

5.0” x 6.3” x 3.7”

12.7 x 16 x 9.4 cm

2.63 lb

1.19 kg

ETHERNET SPECIFICATIONS

Number of Ports 10

7 standard fast Ethernet and 3 combo RJ45/SFP fast Ethernet

RJ45

10/100BASE-TX, auto MDI/MDIX, auto negotiation

(speed/duplex mode)

SFP (Optional)

100BASE-FX Fiber, auto MDI/MDIX, auto negotiation

(speed/duplex mode)

Cable Types

Cat 3, Cat 4, Cat 5, Cat 5e (UTP or STP)

Link Distances

RJ45: 100 Meters

SFP: depends on model: Single-Mode: 30KM, Multi-Mode: 2KM

Port Alarm Relay Yes

Standards

IEEE 802.1AB: Link Layer Discovery Protocol (LLDP)

IEEE 802.1D-2004: Rapid Spanning Tree Protocol (RSTP)

IEEE802.1p: Class of Service

IEEE 802.1Q: VLAN Tagging and GVRP

IEEE 802.1s: Multiple Spanning Tree Protocol (MSTP)

IEEE 802.1X: Port Based Network Access Control

IEEE 802.3: 10BASE-T

IEEE 802.3ab: 1000BASE-TX

IEEE 802.3ad: Link Aggregation Control Protocol (LACP)

IEEE 802.3x: Flow Control and Back-Pressure

IEEE 802.3z: Gigabit Ethernet Fiber

MANAGEMENT FEATURES

Configuration Management

Out-Band Management: console port with Command Line

Interface (CLI) - similar to Cisco CLI, in-band management:

NetVision (Windows application), web interface (HTTP/HTTPS) or

a Telnet/SSH console with CLI

Embedded Watchdog

Embedded hardware watchdog timer automatically resets

system if switch system failure occurs

System Upgrade/Backup

TFTP/web interface for firmware upgrade and configuration

backup/restore

SNMP

V1, V2c, V3 with SNMP trap function, up to four trap stations

SNMP MIB

MIB-II, Bridge MIB, VLAN MIB, IGMP MIB, Ethernet-like MIB,

Comtrol private MIB, and RMON

Email Warning

Automatic warning, up to four accounts by pre-defined events

System Log

Supports both local mode and server mode

DHCP

DHCP client, DHCP server with IP and MAC address binding and

DHCP agent

NETWORK PERFORMANCE

Back Pressure

IEEE 802.3x: 10/100Mbps Half-Duplex Only

Class of Service (CoS)

IEEE 802.1p: 4 priority level (0-7), queue ID (0-3)

Flow Control Pause Frame

IEEE 802.3x: 10/100Mbps Full-Duplex

IGMP Snooping

V1/V2 /V3 for multicast filtering and IGMP query V1/V2; supports

unknown multicasting, processes forwarding policies: drop,

flooding and forward to router port, 256 IGMP multicast groups

IP Security

Assign authorized IP addresses to specific port, 10 max/port

Time Synchronization

Supports NTP protocol with daylight saving function, and

localized time sync function

Port-Based Network Access Control

IEEE 802.1X: Supports user authentication by the RADIUS

account, password and key for the RADIUS severs (primary and

secondary)

Port Configuration

Port link speed, link mode, port staus, enable/disable

Port Mirroring

Online traffic monitoring on multiple selected ports

Port Security

Assign authorized MAC addresses to specific port, 10 max/port

Port Trunk

IEEE 802.3ad LACP with timer and static port trunk; trunk

member up to 8 ports and maximum 5 trunk groups

Private VLAN

Direct client ports in isolated/community VLAN to promiscuous

port in primary VLAN

Rate Control

Ingress filtering for broadcast, multicast, unknown DA or all

packets. Egress filtering for all packet types

Switch Technology

32Gbps switch fabric, store and forward switch technology, 8K

MAC address

System Throughput

2.967Mpps

64 byte packet size

Transfer Packet Size

64 bytes to 1522 bytes (Includes 1522 bytes VLAN tag)

Packet Buffer

1MBits shared memory

Traffic Prioritization (QoS)

Supports 4 physical queues, weighted Round Robin queuing

(WRR 8:4:2:1) and strict priority scheme (IEEE 802.1p COS tag

and IPv4 ToS/ diffserv information) to prioritize industrial network

traffic

VLAN

IEEE 802.1Q: tag VLAN with 256 (Max) VLAN entries, 2K GVRP

entries; 3 VLAN link modes (trunk, hybrid, and link access)

Modbus TCP/IP

CLI support for Modbus TCP/IP communications with Function

Code 4 (factory automation). Operates as slave/server device,

while a typical master/client device is a host computer running

appropriate through Ethernet, The Modbus TCP/IP master can

read or write to the Modbus registers provided by the Modbus

TCP/IP application software (SCADA / HMI System)

NETWORK REDUNDANCY

Rapid Spanning Tree Protocol

IEEE 802.1D-2004 Rapid Spanning Tree Protocol (RSTP):

compatible with legacy STP and IEEE 802.1w

Multiple Spanning Tree Protocol

IEEE 802.1s MSTP: each MSTP instance can include one or more

VLANS and supports multiple RSTPs deployed in a VLAN or

multiple VLANs

Redundant Ring Technology

Failure Recovery within 5ms

Rapid Dual Homing

Multiple uplink paths to upper switches

Ring Trunking

Integrates port aggregate function in ring path to get higher

throughput ring architecture

Multiple Ring

Couple or multiples of up to 16 rings, supports up to 5 fast

Ethernet rings/switch

ELECTRICAL SPECIFICATIONS

Device

DC Input Voltage (positive or negative) 10-60 VDC

Current Consumption (24VDC)

Power Consumption (Max)

Number of Power Connectors 1

Power Connector Type

01A

24W

4-Pin screw terminal block

Power Input Redundancy

Dual redundant inputs

Reverse Polarity Protection Yes

Digital Input

2 with photo optical isolation

Logic Low (0)

Logic High (1)

0 to 10VDC

11 to 30VDC

Digital Output (Relay Output) 2

DC Input Voltage

Current Consumption (24VDC)

24VDC

1A Maximum

ENVIRONMENTAL SPECIFICATIONS

Air Temperature

System On

System Off

-40 o

to 74 o

-40 o

to 85 o

Operating Humidity

Non-condensing 5% to 95%

MTBF (Mean Time Between Failures) 34.6 years

EXPORT INFORMATION

Packaged Shipping Weight

Package Dimensions

UPC Code

ECCN

Schedule B Number

3.9 lbs

1.77 kg

11.3” x 5.5” x 9.1”

28.7 x 13.97 x 23.11 cm

7-56727-32062-3

5A992

8517.62.0050

REGULATORY APPROVALS

Emissions

Canadian EMC Requirements

ICES-003

European Standard EN55022

EN61000-3-2

CISPR 22

FCC Part 15 Subpart B

Class A limit

Immunity

European Standard EN55024

IEC 1000-4-2/EN61000-4-2: ESD

IEC 1000-4-3/EN61000-4-3: RF

IEC 1000-4-4/EN61000-4-4: Fast Transient/Burst

IEC 1000-4-5/EN61000-4-5: Surge

IEC 1000-4-6/EN61000-4-6: Conducted Disturbance

IEC 1000-4-8/EN61000-4-8: Magnetic Field

IEC 1000-4-11/EN61000-4-11: DIPS and Voltage Variations

Safety

IEC 60950/EN60950 (LISTED)

CSA C22.2 No. 60950/UL60950 Third Edition

Shock

Vibration

Free Fall

IEC 60068-2-27

IEC 60068-2-6

IEC 60068-2-32

Hi-Pot

AC 1.2KV for all ports and power

Regulatory Approvals

European Standard: 2002/95/EC Directive (RoHS)

NEMA TS2 Certified

Other Regulatory Approvals

RECOMMENDED PRODUCTS

::

32101-9 PS1060, 60 Watts Industrial DIN rail

power supply (24V, 60W, DIN rail)

32102-6 PS1100, 100 Watts Industrial DIN rail

power supply (24V, 100W, DIN rail)

1200038 24VDC External Power Adapter, Bare

Wires (24VDC, 24W, 3-Wire)

Warranty Information

Comtrol offers a 30-day satisfaction guarantee and

5-year limited warranty.

Sales Support

+1.763.957.6000 [email protected]

Technical Support

+1.763.957.6000 www.comtrol.com/support

Email, FTP, and Web Support [email protected] ftp.comtrol.com www.comtrol.com

© 2013 by Comtrol Corporation. All Rights Reserved. Printed in the U.S.A. All trademarks used herein are the property of their respective trademark holders.

Specifications are subject to change without notice. LT1548B

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement