advertisement
CCTV | NBN-498 Dinion2X Day/Night IP Cameras
NBN-498 Dinion2X Day/Night IP Cameras
▶ 1/3-inch Day/Night CCD with progressive scan
▶ 20-bit image processing technology
▶ Wide Dynamic Range, 2X‑dynamic engine and
SmartBLC
▶ Tri-streaming: Dual H.264 and M-JPEG simultaneously
▶ Intelligence at the edge
▶ ONVIF conformant
Dinion2X Day/Night IP cameras are progressive scan CCD cameras. They can tri-stream video simultaneously — on two H.264 streams and one M-JPEG stream. Equipped with 20-bit DSP with 2X‑dynamic, they have a wide dynamic range for a sharper, more detailed image with outstanding color reproduction.
Features such as multicasting, internet streaming and iSCSI recording are fully supported. Dinion2X Day/Night
IP cameras have built-in video motion detection and additional processing power for video content analysis systems.
Supporting the award-winning Dinion2X digital imaging technology, they provide proven, dependable service for the most demanding security and surveillance requirements, day or night.
Functions
Progressive scan
To capture sharp images, even in busy scenes with high motion content, the Dinion camera uses progressive scan technology.
Superior image quality
With a 1/3-inch CCD and Bosch’s advanced digital signal processing, the Dinion2X Day/Night IP camera provides outstanding image quality in virtually all situations. The highly accurate 20-bit digital signal is automatically processed to reveal every detail of the image in both the high and low-light areas of the scene simultaneously.
20-bit Image Processing
The highly accurate digital signal processing optimally captures the detail in both bright highlights and deep shadows simultaneously. By combining 20-bit image processing and wide dynamic range, the Dinion2X maximizes the information visible in the picture even with strong backlight.
Wide Dynamic Range
The superior wide dynamic range performance for all lighting conditions reveals details previously unseen.
2X-Dynamic and SmartBLC
Using 2X-Dynamic technology, pixel-by-pixel analysis provides the user with the most detailed information. Turn on SmartBLC to automatically compensate the image without the need for complicated set-up or without compromising dynamic range. Features such as Autoblack and Sharpness further improve the details in a scene, pixel by pixel.
www.boschsecurity.com
2 | NBN-498 Dinion2X Day/Night IP Cameras
Efficient bandwidth and storage management
The cameras use H.264 compression, bandwidth throttling, and multicasting capabilities to manage bandwidth and storage requirements efficiently, while delivering high image quality and resolution. The bandwidth of an H.264 stream using Main profile at 4CIF resolution is about the same as one MPEG-4 stream at
2CIF resolution. Bosch's innovative tri-streaming feature enables Dinion IP cameras to generate two independent
H.264 streams and one M-JPEG stream simultaneously.
This allows streaming of high-quality H.264 images for live viewing and recording while streaming M-JPEG images to another device at the same time. The M-JPEG video stream also provides easy integration with third-party
JPEG or M-JPEG-compatible video management systems.
Dinion IP cameras offer unparalleled recording options.
Attached to the network, they can use iSCSI targets directly, as well as Network Video Recorders (NVRs). The iSCSI storage target support enables the cameras to function as a conventional DVR, while streaming highperformance live video across the network.
Standard intelligence
With built-in video content analysis, the camera reinforces the Intelligence-at-the-Edge concept where edge devices become increasingly intelligent. The MOTION+ video motion analysis system, that is built into all camera versions, is the perfect solution for applications where basic video content analysis features are required. This motion analysis algorithm is based on pixel change and includes object size filtering capabilities and sophisticated tamper-detection capabilities.
Hardware enhanced
The hardware-enhanced version of the camera gives you the opportunity to upgrade the video content analysis features of the camera with the more advanced Intelligent
Video Analysis (IVA) option. This option bases the IVA algorithm on digital imaging technology that uses multilevel image analysis of pixels, texture, and object direction, and is activated by installing a license.
ONVIF conformance
The camera conforms to the ONVIF (Open Network Video
Interface Forum) specification which guarantees interoperability between network video products regardless of manufacturer. ONVIF conformant devices are able to exchange live video, audio, metadata and control information. They are automatically discovered and connected to network applications such as video management systems.
Unsurpassed flexibility
There are many ways to access the camera’s video: on a
PC using a web browser, with the Bosch Video
Management System, or with VIDOS. The camera is also ideal for use with a Divar 700 Series digital video recorder. By routing a video stream to a Bosch video decoder, you can also present the video with ultimate clarity on an analog monitor.
Cost effective, simple installation
Three power options, PoE (Power-over-Ethernet), 24 VAC and 12 VDC are available. Using PoE makes installation easier and more cost-effective, as cameras do not require a local power source. To increase system reliability, the camera can be simultaneously connected to both PoE and
12 VDC/24 VAC supplies. Additionally, uninterruptible power supplies (UPS) can be used, which will allow continuous operation, even during a power failure.
For trouble free network cabling, the cameras support
Auto-MDIX.
Dinion IP cameras can be configured using the control buttons on the camera as an alternative to configuration over IP. The On-Screen Display (OSD) simplifies back focus adjustment and network configuration, minimizing installation and support costs. The Lens Wizard automatically detects the lens type and helps focus the lens at the maximum opening to maintain proper focus.
Easy Upgrade
Remotely upgrade the camera whenever new firmware becomes available. This ensures up-to-date products, thus protecting investment with little effort.
Access Security
Various security levels are available for accessing the network, the camera, and the data channels. As well as password protection with three levels, 802.1x
authentication using a RADIUS is supported. To secure
Web browser access use HTTPS with a SSL certificate stored in the camera. For total data protection, the video and audio communication channels can be independently
AES encrypted with 128‑bit keys by installing the optional
Encryption Site License.
Programmable Modes
Six independent, pre-programmed operating modes support typical applications, but are fully programmable for individual situations.
Day/Night switching
In night mode, the camera enhances low light viewing by switching the IR (infrared) filter out of the optical path and providing a monochrome image. The camera can switch from color to monochrome mode automatically by sensing the illumination level, manually via the alarm input, or remotely via a web browser. An internal, through-
NBN-498 Dinion2X Day/Night IP Cameras | 3 the-lens IR detector enhances monochrome mode stability by preventing the camera from returning to color mode when IR-illumination is dominant.
Privacy masking
Four different privacy zones allow specific parts of a scene to be blocked. A mask for any part of the scene can be pre-programmed.
Default Shutter
The default shutter speed captures fast moving objects when sufficient light is available. When light levels fall and other adjustments have been exhausted, the shutter speed reverts to a standard setting to maintain sensitivity.
SensUp Dynamic
By increasing the integration time up to 10 times on the
CCD, the effective sensitivity is dramatically enhanced.
This is especially useful when relying only on moonlight for illumination.
Typical applications
• Prisons and correctional facilities
•
Traffic monitoring (air, land and sea)
Hotels, bars and nightclubs
• Commercial and government buildings
City surveillance and safety
•
Border control
Installation/Configuration Notes
Dimensions
118 (4.646)
85 (3.346)
34 (1.339)
1/4"-20 UNC
Dinion2X D/N IP
48 (1.889)
1/4"-20 UNC
122 (4.803)
66 (2.598)
Certifications and Approvals
Region
Europe
USA
Certification
CE
FCC + UL
Electro Magnetic Compatibility
Emission
Immunity
Safety
Vibration
EN55022 Class B
EN61000-3-2
EN61000-3-3
FCC Part 15
EN50130-4 (PoE, +12 VDC)
EN55024 (24 VAC)
EN50121-4
EN60950-1
UL60950-1 (2nd edition)
CAN/CSA-C 22.2 No. 60950-1
Camera with 500 g (1.1 lb) lens as per
IEC60068-2-6 (5 m/s 2 , operational)
Ordering chart mm (in)
1 N: Network camera
2 B: Fixed body
3 N: Day/Night
4 498:Dinion2X performance
* No license included
5 1: PAL, 50 Hz
2: NTSC, 60Hz
6 1: Motion+
2: Designed for IVA *
7 P: PoE www.boschsecurity.com
4 | NBN-498 Dinion2X Day/Night IP Cameras
Controls
Dinion2X D/N IP
AUDIO IN
1
2
3
ALARM
VIDEO
6
4
5
E
T
H
-
P o
E
AUDIO OUT
12 VDC
24 VAC
-
+
1
2
3
DATA
4
5
6
1 Lens connector
2 Control buttons
3 Audio in
4 Audio out
5 Power supply input
8
9
6
7
10/100 Base-T Fast Ethernet
Data (RS485/422/232)
Reset button
BNC video output (service mode)
10 Alarm in, relay out
Parts Included
1
1
1
1
1
Quantity Components
1
1
1
1
NBN-498 Series Dinion2x Day/Night IP Camera
Spare lens connector
Safety Instructions
Quick Install Guide
Mini DVD-ROM with manuals, software and tools
Power connector
Alarm I/O connector
Data connector
C/CS mount adapter
Technical Specifications
Electrical
Model No.
NBN-498-1xP
NBN-498-2xP
Current Consumption
Rated Voltage
24 VAC ±10%
12 VDC ±10%
Power-over-Ethernet
Rated Frequency
50 Hz
24 VAC ±10%
12 VDC ±10%
Power-over-Ethernet
60 Hz
550 mA | 650 mA IVA (12 VDC)
550 mA | 650 mA IVA (24 VAC)
200 mA | 250 mA IVA (PoE 48 VDC)
Sensor
Type
Active Pixels (PAL)
Active Pixels (NTSC)
1/3-inch CCD, WDR, dual shutter
752 x 582
768 x 494
Video
Video compression
Data rate
Resolution
4CIF
CIF
Overall IP Delay
GOP structure
Frame rate
H.264 (ISO/IEC 14496-10); M-JPEG,
JPEG
9.6 Kbps to 6 Mbps
Horizontal x vertical (PAL/NTSC ips)
704 x 576/480 (25/30 ips)
352 x 288/240 (25/30 ips)
Min. 120 ms, Max. 240 ms
I, IP
1 to 50/60 (PAL/NTSC) H.264
1 to 25/30 (PAL/NTSC) M-JPEG
Video Out
Signal
Connector
Horizontal resolution
Video S/N
Analog composite (NTSC or PAL), service
BNC, 75 Ohm
540 TVL
50 dB
Sensitivity (3200 K, scene reflectivity 89%, F1.2)
Full video
(100 IRE)
Usable picture
(50 IRE)
Color
Color
+ SensUp 10x
Monochrome
2.4 lx
(0.223 fc)
0.24 lx
(0.0223 fc)
0.47 lx
(0.044 fc)
0.047 lx
(0.00437 fc)
Monochrome
+ SensUp 10x
0.98 lx
(0.091 fc)
0.098 lx
(0.0091 fc)
0.188 lx
(0.0174 fc)
0.019 lx
(0.00176 fc)
Minimum Illumination (30 IRE)
0.15 lx
(0.0139 fc)
0.015 lx
(0.00139 fc)
0.060 lx
(0.0056 fc)
0.0060 lx
(0.000557 fc)
Day/Night
Modes
Dynamic range
Signal-to-Noise Ratio
Dynamic engine
Color, Mono, Auto
6 preset programmable modes
120 dB (20-bit image processing)
> 50 dB
2X-Dynamic, XF-Dynamic, SmartBLC+2X-Dynamic
SmartBLC
AGC
White Balance
Shutter
On (includes 2X-Dynamic ) / Off
AGC On or Off (0 - 30 dB) selectable
ATW (2500 to 10000K), ATWhold and manual
Auto (1/50 [1/60] to 1/10000) selectable
Auto (1/50 [1/60] to 1/50000) automatic flickerless, fixed selectable
Sensitivity up
Auto Black
Adjustable from Off up to 10x
Automatic continuous, Off
Dynamic Noise Reduction Auto, On/off selectable
Sharpness Sharpness enhancement level selectable
Peak White Invert On/Off
Privacy Masking
Video Motion Analysis
Test Pattern Generator
Synchronization
Lens Mount
Lens Types
Controls
Four independent areas, fully programmable
Motion+ or IVA
Color bars 100%, Grayscale 11-step, Sawtooth 2H, Checker board, Cross hatch, UV plane
Internal, Line Lock selectable
CS (max lens protrusion 5 mm, 0.2 inch), Cmount compatible with supplied adapter ring
Manual, DC- and Video-Iris auto-detect with override
DC-iris drive: max. 50 mA continuous
Video-iris: 11.5 VDC ±0.5, max. 50 mA continuous
OSD with soft-key operation (multi-lingual)
Audio
Standard G.711
Signal-to-noise ratio
Input/output
Unit Configuration
Flicker Control
Software update
Network
Protocols
300 Hz to 3.4 kHz at 8 kHz sampling rate
> 50 dB
Audio 1 x mono line in, 1 x mono line out
• connector
• signal line in
3.5 mm stereo jack
9 kohm typical, 5.5 Vpp max
• signal line out 3.0 Vpp at 10 kOhm typical,
2.3 Vpp at 32 Ohm typical,
1.7 Vpp at 16 Ohm typical
Alarm 2 inputs
• connector Clamp (non-isolated closing contact)
• activation voltage +5 VDC to +40 VDC
(+3.3 VDC with DC-coupled 22 kOhm pull-up resistor)
Relay
• connector
• voltage
Data port
1 output
Clamp
30 VAC or +40 VDC
Maximum 0.5 A continuous, 10VA
RS‑232/422/485
Software Control
Via web browser or Configuration Manager
50/60 Hz, selectable
Flash ROM, remote programmable
Encryption
Ethernet
PoE supply
RTP, Telnet, UDP, TCP, IP, HTTP, HTTPS,
FTP, DHCP, IGMP V2/V3, ICMP, ARP, SMTP,
SNTP, SNMP, 802.1x, UPnP
TLS 1.0, SSL, AES (optional)
STP, 10/100 Base-T, auto-sensing, half/full duplex, RJ45
IEEE 802.3af compliant
NBN-498 Dinion2X Day/Night IP Cameras | 5
Mechanical
Dimensions (H x W x L) 58 x 66 x122 mm (2.28 x 2.6 x 4.8 inch) without lens
Weight 542 g (1.195 lb) without lens
Color
Tripod Mount
RAL 9007 Metallic Titanium
Bottom (isolated) and top 1/4-inch 20 UNC
Environmental
Operating Temperature* -20°C to +50°C (-4°F to 122°F)
Operating Temperature
(IVA)*
-20°C to +45°C (-4°F to 113°F)
Storage Temperature
Operating Humidity
Storage Humidity
-40°C to +70°C (-40°F to +158°F)
20% to 93% RH up to 98% RH
* for extended temperature range use HAC-IPCCC
Ordering Information
NBN-498-11P Dinion2X D/N IP Camera
1/3-inch Progressive scan, H.264 dual stream, 2X DSP, WDR, PAL, 50 Hz, Motion+,
PoE
NBN-498-21P Dinion2X D/N IP Camera
1/3-inch Progressive scan, H.264 dual stream, 2X DSP, WDR, NTSC, 60 Hz, Motion
+, PoE
NBN-498-12P Dinion2X D/N IP Camera
1/3-inch Progressive scan, H.264 dual stream, 2X DSP, WDR, PAL, 50 Hz, IVA prepared, PoE
NBN-498-22P Dinion2X D/N IP Camera
1/3-inch Progressive scan, H.264 dual stream, 2X DSP, WDR, NTSC, 60 Hz, IVA prepared, PoE
Accessories
EX12LED‑3BD‑8M Infrared Illuminator
EX12LED IR Illuminator, 850 nm, 30 deg beam
EX12LED‑3BD‑8W Infrared Illuminator
EX12LED, IR Illuminator, 850 nm, 60 deg beam
EX12LED‑3BD‑9M Infrared Illuminator
EX12LED IR Illuminator, 940 nm, 30 deg beam
EX12LED‑3BD‑9W Infrared Illuminator
EX12LED, IR Illuminator, 940 nm, 60 deg beam
LTC 3364/21 Varifocal Lens IR corrected
1/3-inch, 2.8 – 6 mm, DC-iris, CS-mount
F1.4-200, 4-pin
LTC 3664/30 Varifocal Lens IR corrected
1/3-inch, 3.0 – 8 mm, DC-iris, CS-mount
F1.0-360, 4-pin
NBN-498-11P
NBN-498-21P
NBN-498-12P
NBN-498-22P
EX12LED-3BD-8M
EX12LED-3BD-8W
EX12LED-3BD-9M
EX12LED-3BD-9W
LTC3364/21
LTC3664/30 www.boschsecurity.com
6 | NBN-498 Dinion2X Day/Night IP Cameras
Ordering Information
LTC 3664/40 Varifocal Lens IR corrected
1/3-inch, 2.8 – 11 mm, DC-iris, CS-mount
F1.4-360, 4-pin
LTC 3674/20 Varifocal Lens IR corrected
1/3-inch, 7.5 – 50 mm, DC-iris, CS-mount
F1.3-360, 4-pin
LTC 3764/20 Varifocal Lens IR corrected
1/2-inch, 4 – 12 mm, DC-iris, C-mount
F1.2-360, 4-pin
LTC 3774/30 Varifocal Lens IR corrected
1/2-inch, 10 – 40 mm, DC-iris, C-mount
F1.4-360, 4-pin
UPA-2410-60 Power Supply
120 VAC, 60 Hz, 24 VAC, 10 VA Out
UPA-2430-60 Power Supply
120 VAC, 60 Hz, 24 VAC, 30 VA Out
UPA-2450-60 Power Supply
120 VAC, 60 Hz, 24 VAC, 50 VA Out
UPA-2420-50 Power Supply
220 VAC, 50 Hz, 24 VAC, 20 VA Out
UPA-2450-50 Power Supply
220 VAC, 50 Hz, 24 VAC, 50 VA Out
S1374 Adapter converts C mount lens to CS mount camera
HAC‑IPCCC Camera Cooling Case
For use with Dinion IP cameras in combination with HSG and UHO Series housings equipped with an optional blower
Software Options
MVC-FIVA4-CAM
IVA 4.0 VCA software license for IP camera/ dome (e‑license)
MVC-FENC-AES BVIP AES 128 Bit
Encryption
BVIP AES 128‑bit encryption site license.
This license is required only once per installation. It enables encrypted communication between BVIP encoders, decoders and management stations.
LTC3664/40
LTC 3674/20
LTC 3764/20
LTC 3774/30
UPA-2410-60
UPA-2430-60
UPA-2450-60
UPA-2420-50
UPA-2450-50
S1374
HAC-IPCCC
MVC-FIVA4-CAM
MVC-FENC-AES
Americas:
Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, New York, 14450, USA
Phone: +1 800 289 0096
Fax: +1 585 223 9180 [email protected]
www.boschsecurity.us
Europe, Middle East, Africa:
Bosch Security Systems B.V.
P.O. Box 80002
5600 JB Eindhoven, The Netherlands
Phone: + 31 40 2577 284
Fax: +31 40 2577 330 [email protected]
www.boschsecurity.com
© Bosch Security Systems Inc. 010 | Data subject to change without notice
T6870134027 | Cur: en-US, V7, 30 Jul 2010
Asia-Pacific: Represented by
Robert Bosch (SEA) Pte Ltd, Security Systems
11 Bishan Street 21
Singapore 573943
Phone: +65 6258 5511
Fax: +65 6571 2698 [email protected]
www.boschsecurity.com
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project