cemb catalog 2016

cemb catalog 2016
Garage equipment division
PRODUCT CATALOG
2017
Wheel Balancers - Tire Changers - Wheel Alignment
CEMB® USA
1-678-717-1050
www.cemb-usa.com
About CEMB®
TABLE OF
CONTENTS
2 The company
3 History
4 Did you know?
5 Balancing divisions
Wheel balancers
8 Car
13 Motorcycle
14 Truck
Tire changers
16 Car
18 Motorcycle
19 Truck
Wheel alignment
20 Car
21 Truck
Accessories
22 Standard accessories
25 Optional accessories
Equipment comparisons
26 Wheel balancers
27 Tire changers
THE COMPANY
CEMB® ITALY
CEMB® is located in Mandello del Lario on the east shore of Lake Como, not far from Milan’s main airports.
The Company building with the management offices as well as the technical, commercial and administrative
departments, the show rooms and meeting/training rooms is set on an area of 100,000 ft².
The departments for the production of industrial balancing machines and instruments for vibration analysis are
also housed in the same building.
A second manufacturing unit, located in an area of 125,000 ft², is involved with the batch production of wheel
balancing machines for vehicle wheels, alignment units and testing lines.
BL SYSTEMS, INC
The CNC machinery used by CEMB® in the production phase are the very best the market has to offer. These
are machines embodying the latest technological developments, exclusively with numerical control. Using
machines of this quality is the only way CEMB® can guarantee total control over the quality of the critical parts
on the balancing machines. Moreover the machines tools are continually being renewed in order to achieve
the continued and constant manufacturing of high precision components which has always distinguished
CEMB®’s quality manufactured products.
CEMB® USA
Established in 1978, BL Systems inc / CEMB® USA is a CEMB® owned US Company located in Gainesville
(Georgia) near Lake Lanier, one hour North East of Atlanta (Georgia).
The name BL Systems was derived from the owner and founder’s name, Buzzi, Luigi.
®
CEMB® has been selling garage and industrial balancing equipment in the US since 1969. Most garage
equipment in the earlier years were sold through US companies under private label. Today we still continue to
sell to many US companies under private label as well as our own name. There are many end users throughout
the US and Canada unaware that the manufacturer of the equipment they have been using for many years is
in fact CEMB®. Currently we have a complete sales force of representatives and service centers throughout
all of the US to help support our wheel service lines of wheel balancers, tire changers and wheel alignment
equipment.
ITALIAN HEART: all the parts influencing the quality of our wheel balancers are manufactured at CEMB®
facilities through appropriate machinery. The tolerances used are the most accurate on the market.
An accurate and constant balancing is maintained through time.
VDD - VIRTUAL DIRECT DRIVE:
Thanks to the experience in the sectors of industrial balancing and vibration analysis CEMB® developed the
new patented device called Virtual Direct Drive.
With VDD the most economic wheel balancer of CEMB® range wins in speed and accuracy against any other
model of the competitors!
THE HISTORY
A COMPANY, AN ENTREPRENEUR
CEMB® Shangai
Hofmann® Germany
CEMB® Headquarter
CEMB® Hofmann® UK
CEMB® USA
CEMB® IN THE WORLD
In 1946 Luigi Buzzi designed the first balancing machine: a revolutionary solution he covered by patents. From
1946 to 1949 he built up the production of mechanical resonance type balancing machines and stroboscopic
types came later. In 1952 came the first production of balancing machines for motor vehicle wheels. In 1960 he
encouraged the use and construction of an R&D department for the rapidly growing field of electronics:
CEMB® is the first Italian Company and the second in the world to design and manufacture wheel balancing
machines.
CEMB® today is led by Luigi’s son Carlo, who is the actual President and Technical Director.
The research and the continuous technical innovation are the reasons that guarantee CEMB®’s main role in both
the garage and industrial fields of balancing. CEMB® is the only Company in the world to manufacture in both
sectors of balancing equipment and that gives it an evident technical and quality advantages over competitive
manufacturers.
A team of specialists
at customers’ service.
CEMB® offers an extensive sales and technical service network in over 80 countries throughout the world.
Training courses covering all problems of vibration technology, balancing and maintenance are held by
qualified staff at CEMB® headquarters in Mandello del Lario (Italy) and Gainesville GA (USA) or at customer’s
own premises.
DID YOU KNOW?
25 THINGS YOU DIDN’T KNOW ABOUT CEMB®
4
1. CEMB® is one of the largest garage wheel service equipment manufacturers in the world and they have been
in the garage equipment business since 1946.
2. They have been selling equipment in the United States for more than 45 years, mostly under private label.
3. In 70 years CEMB® has built wheel balancers, tire changers and wheel alignments under more than 30
different private labels all around the world, most of which are very recognizable American, Italian,
French, German and Japanese brands.
4. Distributors may have sold (or are selling) CEMB® equipment and end-users may even be using a CEMB®
product and they are unaware of it.
5. CEMB® in the 1970’s was the first company in the world using “OK” on its balancer when the wheel was
balanced.
6. In early 80’s CEMB® built a tire changer/balancer combo named “Jolly”.
7. In 1998 CEMB® invented and patented the real industrial “roller” to
measure the tire uniformity.
8. CEMB® invented and patented the automatic entry of dimensions of
the wheels and the system to apply adhesive counterweight using the
automatic arm.
9. CEMB® invented the fixed shaft automotive wheel balancer, which it still
uses today.
10. Between 1975 and 1978 CEMB® invented and patented diagnostic
systems to test suspensions and shock absorbers.
11. CEMB® is the only company in the world manufacturing rust-proof
cabinet wheel balancers.
12. CEMB® is the only balancing machines manufacturer in the world with
three different specialized balancing divisions.
13. CEMB® wheel alignment equipment, only recently introduced in the United
States, is already a major player in that product line.
14. CEMB® is the only manufacturer in the world to make both garage and
automated assembly line wheel service mounting and balancing
equipment, as well as tire matching, diagnostic and tire uniformity testing
machines.
15. You will find CEMB® and Hofmann® assembly line equipment throughout
the world in the plants of automobile and tire manufacturing companies.
16. CEMB® balances everything in the transportation industry: bus, truck, airplane wheels and jet engine rotors
to high speed train wheels and axles.
17. In the automotive industries besides wheels, tires and alignment service, they also sell equipment to OEM
manufacturers to balance and mill disc brake rotors and to balance engine crankshafts, drive shafts,
flywheels, brake drums, clutches, pulleys, radiator fans, electric motors and turbochargers.
18. Over 70 million brake discs per year are balanced on CEMB® balancers.
19. Over 50 million wheels have come thru assembly lines using CEMB® automatic equipment to mount, inflate,
balance and tire match wheels, as well as tire uniformity and eccentricity testing.
20. Over 2 million drive shafts have been balanced on CEMB® balancers.
21. Over 10 million clutches have been balanced on CEMB® balancers.
22. CEMB® garage wheel balancers are used by famous Italian and Korean tire manufacturers for their
Formula 1 and DTM motorsport championships.
23. CEMB® USA is one of the few wheel service companies that still offer a full one year onsite labor warranty on
most of their equipment products.
24. CEMB® USA is also one of the few companies that test and assemble all their equipment before shipping.
25. CEMB® USA, unlike most other companies, has a live person answer their phones and either handles your
call directly or puts you in touch with someone who can.
THREE BALANCING
DIVISIONS
CEMB® is the only company in the world manufacturing balancing equipment for 3
different divisions, with great technical advantages coming from the synergy of all
those sectors.
Industrial balancers
division
Garage equipment
division
Vibration analysis
INDUSTRIAL BALANCING MACHINES DIVISION
CEMB® manufactures and markets a wide range of industrial
balancing machines.
Vertical balancers with balancing on one or two correction planes,
for rotors weighing a few grams up to 3,000 kg (6,600 lbs).
Horizontal balancers with joint drive or belt drive for rotors from
10 g (0.35 oz) up to 100,000 kg (220,000 lbs).
All balancing machines can incorporate devices for measuring
vibrations and automatic correction of the unbalances.
The mechanical structure and electronic control modules are
designed to work under the most severe operation conditions and
they are also suitable for large batch production.
Examples of balancing machines produced by CEMB®:
• Turbochargers
• Brake discs
• Crankshafts
• Brake drums
• Clutches
• Fans
• Flywheels
• Pulleys
• Pumps
• Electric motors
• Rims, wheels and tires
• Train and airplane wheels
• Balancing machines for aircraft industry
In Worms (Germany) another company of the CEMB® group, Hofmann® Maschinen und Anlagenbau GmbH,
manufactures balancers and testing machines for industrial applications:
• machines for measuring tire uniformity
• machines for testing rims and tires
• automatic systems for mounting, inflating and balancing rims and tires in series
• special machines for balancing every type of rotor
CEMB® strengthened its position in the industrial field thanks to Hofmann®’s technical experience and contacts
with all the major vehicle and tire manufacturing companies, along with the manufacturing and commercial
synergies, which benefits both companies.
division
THREE BALANCING
DIVISIONS
CEMB® can provide a full range of technical publications, containing
a large number of monographies on vibrotechniques and maintenance.
It is also possible to arrange for tailor-made courses at customer’s premises.
At the end of each course, a certificate of attendance is issued.
VIBRATION ANALYSIS AND PORTABLE EQUIPMENT DIVISION
CEMB® designs and manufactures a full range of equipment for vibration measuring and correction of the
unbalances on rotating machines.
The instrumentation for continuous monitoring, based on
microprocessors of the latest generation, allows the users to
implement powerful and flexible monitoring systems, simplifying
the presetting of the measuring ranges and the alarm levels.
Portable instruments allow easy and accurate solving of any
vibration problem on machines during operation: vibration
measuring, balancing by means of memorized programs,
analysis of vibrations at the end of diagnostic, ability to print
individual customer certificates.
•
•
•
•
•
•
Multichannel vibrometers, analyzers, balancers, tachometers for vibration displacement, speed and
acceleration measurement
Vibration monitoring equipment
Multichannel modular systems for monitoring of vibration, displacement, expansion, eccentricity, speed and
temperature
Advanced systems for the protection of rotating machines
Transducers sensor for speed, acceleration, proximity,
expansion and vibration measurement
Vibration transmitters
CEMB® devotes particular attention to the after-sale technical
assistance in order to assure a complete customer’s satisfaction.
CEMB® not only provides for all the support needed in the
installation process of its equipment, but it also assures the presence
of specialized personnel for checks of all system components, all the
way to a turnkey delivery.
THREE BALANCING
DIVISIONS
CEMB® is the only company in the world manufacturing rust-proof cabinet wheel
balancers and pneumatic locking truck wheel balancers.
GARAGE EQUIPMENT DIVISION
CEMB® has specialized since 1946 in the design and production of balancing machines in a constant search of
accuracy, reliability and ease of use.
CEMB® offers innovative, patented solutions and the widest range of products in the world.
•
Wheel Balancers for motorcycles, cars, trucks and buses complete with high precision centering adaptors
of the wheels: CEMB® offers the most diverse and complete range available on the market!
The excellent performances of every CEMB® wheel balancer are the result of the special attention given to the
creation of every component of the machine: all the parts influencing the quality of our balancing machines.
CEMB® balancing machine components are manufactured inside
the company’s factory, through the use of machineries which are
expressly developed for this purpose and using the most accurate
tolerances on the market.
In this way CEMB® guarantees extreme accuracy of balance readings
and repeatability .
•
Electro-pneumatic and automatic Tire Changers.
All the CEMB® tire changers semiautomatic, automatic or leverless
are characterized by a robust and compact structure.
In that way we can guarantee extreme durability.
These characteristics, along with high technological content, make
CEMB® tire changers the ideal solution for the professional.
•
Wheel Alignment for cars and trucks, based on latest
technology, original and patented innovations.
•
Integrated and modular systems for computerized diagnostics
of motor vehicle brake and suspension units (not available in
the US).
•
Extremely high-tech industrial systems for mounting, inflating, matching, bead seating, optimizing,
balancing, uniformity and eccentricity.
All these stations are integrated in a single automated line and are in use by major worldwide vehicle and tire
manufacturers.
ER100
Fully automatic laser wheel balancer
and diagnostic center
• Fully automatic data entry 3D by means of lasers
• Automatically positions the wheel at the weight placement location
• LED to light the work space inside the rim
• Full-time accuracy with Static unbalance always displayed on screen
• Automatic complete diagnostic of rim, tire and wheel assembly
• Automatic ZERO WEIGHT Lift (
)
• Pneumatic locking (
)
• Fully automatic Spotter Laser System for best correction possible
(no comebacks)
• Industrial touch screen
• Full size printer
• Comes fully assembled
• Made in Italy
ER100 is the only machine which can measure in 6 seconds and
without any intervention of the operator:
- Dimensions data entry
- Unbalance readings
- Wheel Runout
- Rim Runout
- Tread Depth
- Tire Conicity to identify vehicle pulls
- Direct matching between the tire and rim to reduce the Runout
TAGE
N
S
ADVA
Everything with no extra spins!!
In 6
nds:
seco
ing
alanc
eel b t
h
W
u
•
runo
• Rim l runout
e
g
e
h
•W
atchin
ect m th
• Dir
p
e
ad d
• Tre onicity
ec
• Tir
e set
ir
T
•
8
TECHNICAL DATA
Power requirements
Balancing speed
Average cycle time
Rim width capacity
Rim diameter capacity
Max. tire diameter
Max. wheel weight
Shaft diameter
Operating pressure
Shipping weight
110VAC, 50/60 Hz, 1 ph
100 rpm
6s
1.5” - 20” (40 - 510 mm)
10” - 30” (265 - 765 mm)
40” (1,016 mm)
165 lbs (75 Kg)
40 mm
7 - 10 bar (105 - 145 psi)
650 lbs (295 kg)
Standard accessories:
C
ER75TD
TAGE
N
cking
atic lo gnetic
m
u
e
a
• Pn
ctrom
h ele
wit
e
brak
timal
e op
es th
heels
s
o
w
p
ro
the
• It p ment of
r
place vehicle fo t and e
or
on th um comf
xim
ma safety
ER73TD
ADVA
• Industrial video touch screen professional wheel balancer especially designed for tire dealers
• Pneumatic locking (
)
• Automatic distance and diameter entry with width sonar 3D (
)
• Full-time accuracy with Static unbalance always displayed on screen
• Runout sonar for wheel diagnostic (
)
• Electromagnetic brake holds the wheel in position
• New automatic arm to measure diameters up to 30”
• LED to light the work space inside the rim
• Fully automatic Spotter Laser System for best correction possible
(no comebacks)
• Thermal printer
• Available 110VAC or 220VAC
• Comes fully assembled
• Made in Italy
S
TECHNICAL DATA
Power requirements
Balancing speed
Average cycle time
Rim width capacity
Rim diameter capacity
Max. tire diameter
Max. wheel weight
Shaft diameter
Operating pressure
Shipping weight
110VAC or 220VAC, 50/60 Hz, 1 ph
100 rpm
5s
1.5” - 20” (40 - 510 mm)
10” - 30” (265 - 765 mm)
42” (1,067 mm)
165 lbs (75 Kg)
40 mm
7-10 bar (105 - 145 psi)
400 lbs (180 Kg)
Standard accessories:
C
+ 2-piece truck cone kit
Video diagnostic wheel balancer
for cars and light trucks
• Industrial video touch screen professional wheel balancer especially designed for tire dealers
• Standard locking with quick-nut
• Automatic distance and diameter entry with width sonar 3D (
)
• LED to light the work space inside the rim
• Full-time accuracy with Static unbalance always displayed on screen
• Electromagnetic brake holds the wheel in position
• New automatic arm to measure diameters up to 30”
• Fully automatic Spotter Laser System for best correction possible
(no comebacks)
• Available 110VAC or 220VAC
• Optional runout sonar for wheel
diagnostic (
)
• Optional printer available
• Comes fully assembled
• Made in Italy
TAGE
N
S
ADVA
Video diagnostic wheel balancer
for cars and light trucks
s
lway
nce a
nbala creen for
u
ic
t
s
• Sta yed on
displa curacy
c
a
best
stem
er Sy
r Las
e
t
t
o
• Sp
TECHNICAL DATA
Power requirements
Balancing speed
Average cycle time
Rim width capacity
Rim diameter capacity
Max. tire diameter
Max. wheel weight
Shaft diameter
Shipping weight
110VAC or 220VAC, 50/60 Hz, 1 ph
100 rpm
5s
1.5” - 20” (40 - 510 mm)
10” - 30” (265 - 765 mm)
42” (1,067 mm)
165 lbs (75 Kg)
40 mm
390 lbs (177 Kg)
Standard accessories:
B
+ 2-piece truck cone kit
ER72TD
• Professional digital wheel balancer especially designed for tire dealers
• Standard locking with quick-nut
• Automatic distance and diameter entry with width sonar 3D (
• LED to light the work space inside the rim
• Full-time accuracy with Static unbalance always displayed on screen
• Electromagnetic brake holds the wheel in position
• New automatic arm to measure diameters up to 30”
• Fully automatic Spotter Laser System for best correction possible
(no comebacks)
• Available 110VAC or 220VAC
• Comes fully assembled
• Made in Italy
TAGE
N
ing
work
t the im
h
g
li
he r
D to
• LE e inside t
spac
sy
ry bu
or ve dealers
f
t
c
e
rf
• Pe s and tire
shop
TECHNICAL DATA
110VAC or 220VAC, 50/60 Hz, 1 ph
100 rpm
5s
1.5” - 20” (40 - 510 mm)
10” - 30” (265 - 765 mm)
42” (1,067 mm)
165 lbs (75 Kg)
40 mm
370 lbs (168 Kg)
Standard accessories:
B
+ 2-piece truck cone kit
Digital wheel balancer
for cars and light trucks
• Automatic distance and diameter entry 2D (
)
• Optional width sonar 3D
• Standard locking with quick-nut
• Wide working space
• Laser Line for quicker stick-on weight placement
• LED to light the work space inside the rim
• Electromagnetic brake holds the wheel in position
• New automatic arm to measure diameters up to 30”
• Direct weight location program (no repositioning of stick-on weight)
(
)
• Direct selection ounce or grams
• Comes fully assembled
• Made in Italy
TAGE
N
S
ADVA
ER71
Power requirements
Balancing speed
Average cycle time
Rim width capacity
Rim diameter capacity
Max. tire diameter
Max. wheel weight
Shaft diameter
Shipping weight
sy
ent
or ea
line f ht placem
r
e
s
• La -on weig
k
lly
stic
atica
utom
a
s
e
r
easu
30”
• It m ers up to
t
e
m
e
dia
brak
netic
mag el in
o
r
t
c
e
wh
• Ele
s the ion
hold
posit
10
)
S
ADVA
Professional wheel balancer
for cars and light trucks
TECHNICAL DATA
Power requirements
Balancing speed
Average cycle time
Rim width capacity
Rim diameter capacity
Max. tire diameter
Max. wheel weight
Shaft diameter
Shipping weight
110VAC, 50/60 Hz, 1 ph
100 rpm
5s
1.5” - 20” (40 - 510 mm)
10” - 30” (265 - 765 mm)
40” (1,016 mm)
165 lbs (75 Kg)
40 mm
354 lbs (160 Kg)
Standard accessories:
B
• Space saving motorized wheel balancer
• For cars and light trucks, motorcycle and scooter wheels (by means of optional accessories)
• Automatic distance and diameter entry 2D (
)
• Direct weight location program (no repositioning of stick-on weight) - (
)
• Multi-function display
• SPLIT program to hide the counterweight behind the spokes
• Foot pedal brake for easy weight placement
• Splash guard
• Comes fully assembled
• Made in Italy
TAGE
N
S
ADVA
EZ9
Motorized digital automatic wheel balancer
ose
for th ed,
ned
e
ig
p
s
s
e
D
ire
requ nd high
who
a
y
ce
rac
accu
h spa s
n
ty wit
quali dimensio
g
savin
TECHNICAL DATA
110VAC, 50/60 Hz, 1 ph
100 rpm
5s
1.5” - 20” (40 - 510 mm)
10” - 30” (265 - 765 mm)
36” (914 mm)
165 lbs (75 Kg)
40 mm
260 lbs (118 kg)
Standard accessories:
B
Portable hand spin wheel balancer
for cars and light trucks
• Space saving wheel balancer with excellent technical specifications
• Automatic distance and diameter entry 2D (
)
• Dual voltage power supply 12VDC - 110VAC
• Standard lightweight battery pack for use when power not available
• Direct selection ounce or grams
• Direct weight location program (no repositioning of stick-on weight) - (
• Foot pedal brake for easy weight placement
• Wheels for easy portability
• Hand spin
• Comes fully assembled
• Made in Italy
)
ble
porta
TAGE
N
S
ADVA
EZ29
Power requirements
Balancing speed
Average cycle time
Rim width capacity
Rim diameter capacity
Max. tire diameter
Max. wheel weight
Shaft diameter
Shipping weight
e
ervic
bile s
k
r mo ttery pac
o
f
t
c
a
rfe
the b
• Pe
o
t
s
k
than
easy
e for
brak
l
a
d
ent
ot pe
• Fo ht placem
er
weig
alanc
eel b mited
h
w
t
li
fec
ith
e per erator w
• Th
e op
h
t
r
e
fo
spac
TECHNICAL DATA
Power requirements
Balancing speed
Average cycle time
Rim width capacity
Rim diameter capacity
Max. tire diameter
Max. wheel weight
Shaft diameter
Shipping weight
12VDC - 110VAC 50/60 Hz
100 rpm
5s
1.5” - 20” (40 - 510 mm)
10” - 30” (265 - 765 mm)
42” (1,067 mm)
165 lbs (75 Kg)
40 mm
150 lbs (68 kg)
Standard accessories:
B
11
EZ1
• Space saving wheel balancer with excellent technical specifications
• Manual data entry
• Multifunctional digital panel with Behind Spoke (Split) mode
• Dual voltage power supply 12VDC - 110VAC
• Standard lightweight battery pack for use when power not available
• Hand spin
• It comes with a tire changer mounting clamp to attach EZ1 to a swing-arm
machine with tank up to 7” outside diameter
• Made in Italy
TAGE
N
The EZ solution for your business!!
a
ed to
hang changer
e
b
n
e
• Ca
rm tir
ing-a
sw
ize
optim
s you space
lp
e
h
• It
king
r wor
you
12
EZ1: the simplest and extremely compact wheel balancer usable
anywhere!
Great for gas stations, small and medium size car automotive garages.
It can be mounted on a swing-arm tire changer (clamp for round tanks
included).
S
ADVA
Compact hand spin wheel balancer
for cars and light trucks
TECHNICAL DATA
Power requirements
Balancing speed
Average cycle time
Rim width capacity
Rim diameter capacity
Max. wheel weight
Shaft diameter
Shipping weight
12VDC - 110VAC 50/60 Hz
100 rpm
5s
1.5” - 20” (40 - 510 mm)
10” - 30” (265 - 765 mm)
100 lbs (45 Kg)
40 mm
150 lbs (68 kg)
Standard accessories:
B*
+ Tire changer mounting clamp
* Note: Standard wing-nut (no quick release)
K22
Digital wheel balancer for motorcycle wheels
• For traditional bearing type motorcycle wheels
• For rear flanged wheels (single arm) and scooter wheels with optional AGF kit
• Automatic distance and diameter entry 2D (
)
• Easy spinning and braking by motorized roller
• Fixed shaft: the wheel runs freely on its own bearings thus reproducing
the exact mounting of the wheel on the motorbike for diagnosing bearing problems
• Dynamic balancing (on two correction planes) and Static balancing (one plane)
• Low balancing speed
• Comes fully assembled
• Made in Italy
The K22’ shaft is fixed so that the wheel rotates freely on its own
bearings. This simulates exactly the assembly of the wheel on the
motorbike and eliminates all the assembly inaccuracies which are
inevitable with traditional balancing machines for car wheels where the
adapter is put in rotation with the wheel.
Using the optional AGF Tool Kit (CEMB patent) you can balance
scooter wheels and common flanged or single sided arm wheels.
TAGE
N
S
ADVA
The best in the market for your motorcycle business!
er
r
alanc igned fo
s
eel b
• Wh ifically de els
spec ycle whe
rc
moto
ic
nam
d dy
tic an
a
t
S
•
cing
balan
TECHNICAL DATA
Power requirements
Balancing speed
Average cycle time
Rim width capacity
Rim diameter capacity
Max. tire diameter
Max. wheel weight
Shaft diameter
Shipping weight
110VAC, 50/60 Hz, 1 ph
80 rpm
5s
1.5” - 20” (40 - 510 mm)
10” - 24” (265 - 610 mm)
28” (711 mm)
66 lbs (30 Kg)
15 mm
220 lbs (100 Kg)
Standard accessories:
A
13
• Pneumatic locking
• Automatic distance and diameter entry 2D (
)
• Powerful three-phase motor
• Integrated pneumatic lift for wheels up to 550 lbs (250 Kg)
• Electro-pneumatic stationary brake
• 15” TFT screen
• Full-time accuracy with Static unbalance always displayed
• Radial runout sonar for wheel diagnostic (
)
• Optimization program and SPLIT program
• 51” wheel guard
• Comes fully assembled
• Made in Italy
TAGE
N
S
ADVA
C202SE
The only professional truck wheel balancer in the world
with the pneumatic locking
cking
atic lo
eum
• Pn
ls in
whee
ncing
r bala nities
o
F
•
qua
large
TECHNICAL DATA
Standard accessories:
E
Professional truck wheel balancer
for cars, heavy-duty trucks and buses
• Automatic distance and diameter entry 2D (
)
• SPLIT program and Optimization program
• Integrated pneumatic lift for wheels up to 550 lbs (250 Kg)
• Electro-pneumatic stationary brake
• Full-time accuracy with Static unbalance always displayed
• 15” TFT screen
• ALU-S function for light alloy or special shaped rims (car and truck)
• Radial runout sonar for wheel diagnostic (
)
• 51” wheel guard
• Comes fully assembled
• Made in Italy
TAGE
N
ar for
t son
unou
r
c
l
ti
s
ia
no
Rad
l diag
whee
14
230/400VAC, 50/60 Hz, 3 ph
70 rpm
< 20 s
1.5” - 20” (40 - 510 mm)
10” - 30” (265 - 765 mm)
51” (1,295 mm)
550 lbs (250 Kg)
60 mm
8 - 10 bar (115 - 145 psi)
800 lbs (363 Kg)
S
ADVA
C218
Power requirements
Balancing speed
Average cycle time
Rim width capacity
Rim diameter capacity
Max. tire diameter
Max. wheel weight
Shaft diameter
Operating pressure
Shipping weight
TECHNICAL DATA
Power requirements
Balancing speed
Average cycle time
Rim width capacity
Rim diameter capacity
Max. tire diameter
Max. wheel weight
Shaft diameter
Operating pressure
Shipping weight
110VAC, 50/60 Hz, 1 ph
70 rpm (truck)- 100 rpm (car)
10 - 20 s
1.5” - 20” (40 - 510 mm)
10” - 30” (265 - 765 mm)
51” (1,295 mm)
550 lbs (250 Kg)
40 mm
8 - 10 bar (115 - 145 psi)
750 lbs (340 Kg)
Standard accessories:
D
Accessory rack
C212
• Automatic distance and diameter entry 2D (
)
• SPLIT program and Optimization program
• Integrated pneumatic lift for wheels up to 550 lbs (250 Kg)
• Electro-pneumatic stationary brake
• Full-time accuracy with Static unbalance always displayed
• ALU-S function for light alloy or special shaped rims (car and truck)
• 51” wheel guard
• Comes fully assembled
• Made in Italy
TAGE
N
S
ADVA
Professional truck wheel balancer
for cars, heavy-duty trucks and buses
TECHNICAL DATA
Power requirements
Balancing speed
Average cycle time
Rim width capacity
Rim diameter capacity
Max. tire diameter
Max. wheel weight
Shaft diameter
Operating pressure
Shipping weight
110VAC, 50/60 Hz, 1 ph
70 rpm (truck)- 100 rpm (car)
10 - 20 s
1.5” - 20” (40 - 510 mm)
10” - 30” (265 - 765 mm)
51” (1,295 mm)
550 lbs (250 Kg)
40 mm
8 - 10 bar (115 - 145 psi)
615 lbs (280 Kg)
Standard accessories:
D
Portable hand spin truck wheel balancer
for cars, heavy-duty trucks and buses
• Portable wheel balancer with automatic distance and diameter entry 2D (
• Dual voltage power supply 12VDC - 110VAC
• Easy hand spin system requires minimum effort for spinning
• Manual lifting system can easilly handle wheel up to 550 lbs (250 Kg)
•SPLIT program and Optimization program
• Wheels for easy portability
• Battery pack for use when power not available
• Comes fully assembled
• Made in Italy
)
ble
porta
TAGE
N
S
ADVA
C206
easy
t for
g
tic lif
a
m
ir
a ba
eu
with
• Pn
ring
e
t
n
e
c
t
effec
hoice
op c
ire sh
t
k
c
• Tru
ble
suita ice
larly
rv
u
e
ic
s
t
r
e
• Pa e mobil
h
t
s
for
nsion
dime
d
e
c
du
ht
• Re
weig
and
sign
g de
savin
e
c
a
• Sp
TECHNICAL DATA
Power requirements
Balancing speed
Average cycle time
Rim width capacity
Rim diameter capacity
Max. tire diameter
Max. wheel weight
Shaft diameter
Shipping weight
12VDC - 110VAC 50/60 Hz
70 rpm (truck)- 100 rpm (car)
10 - 20 s
1.5” - 20” (40 - 510 mm)
10” - 30” (265 - 765 mm)
51” (1,295 mm)
550 lbs (250 Kg)
40 mm
371 lbs (170 Kg)
Standard accessories:
D
15
SM1120
• For standard, low profile and run-flat wheels of cars and light
commercial vehicles
• Quick locking expanding nut with centering by cone and
quick lock-ring
• Fully adjustable bead breaker with Smart Blade System
• Double Effect bead breaker
• Bead breaker shovel with Power-Out System
• Multi-function roller bead loosening unit
• Standard equipment with Press arm to ease mounting operations of
Run Flat and UHP tires
• Wheel lift standard
• DUAL FIT innovative mounting/dismounting wheel system built-in the
operating arm. By a simple adjustment, it allows to operate in leverless
mode with UHP super-low profile and Run Flat tires or in standard
mode, using a traditional operating head, with soft-shoulder tires.
• Two-speed rotation of the spindle by motoinverter
G
A
E
T
N
• CEMBlast bead seating system standard
• It comes standard with Universal Pattern Adaptor
for reverse mounted wheels 4-5-6 holes and one
two-faced cone 75mm-145mm (2.95”- 5.7”)
rofile
• Comes fully assembled
low p s r
o
f
e
l
a
t tir
Fla
• Ide
• Made in Italy
n
u
R
S
ADVA
Professional, super-automatic leverless
center post tire changer
and
16
TECHNICAL DATA
Power requirements
Rim clamping range
Max. tire outside
Max. tire width
Bead breaker force (Smart Blade)
Bead breaker force (Roller unit)
Operating pressure
Shipping weight
220VAC, 1 ph / 2 speed
12” - 30”
1,200 mm (47”)
410 mm (16”)
7,056 lbs (3,200 Kg)
2,630 lbs (1,200 Kg)
10 bar (145 psi)
1,000 lbs (453 kg)
Standard accessories:
I
Professional tire changer with Smart Blade
for cars and light truck wheels
• Automatic tire changer with a tilting back post pneumatically controlled
by a pedal, for conventional low profile and Run-Flat wheels of cars and
light commercial vehicles
• Dual clamping cylinders
• Adjustable table with inflators on each clamp
• Double Effect bead breaker
• Bead breaker shovel with Power-Out System
• Designed to operate on sport wheels with big size alloy rims, extra-low
profile and Run-Flat tires up to a maximum width of 16”.
• Clamping of rims from 10” to 28”
• Fully adjustable bead breaker with Smart Blade System
• It comes standard with Help arm and Press arm (one on each side)
• Comes fully assembled
• Made in Italy
TAGE
N
S
ADVA
SM951HPA
e,
to us
easy he
d
n
ick a
for t
• Qu no effort
with
ator
oper
e
es ar
file tir
w pro m with
o
L
•
roble ress Arm
no p
P
and
lp
e
H
d
t bea
Effec
le
b
u
ith
• Do
em
ker w
brea Out Syst
r
e
Pow
TECHNICAL DATA
Power requirements
Inside clamping range
Outside clamping range
Max. tire outside
Max. tire width
Bead breaker force
Operating pressure
Shipping weight
110VAC, 50/60 Hz, 1 ph
13” - 28”
10” - 26”
1,100 mm (43”)
415 mm (16”)
7,000 lbs (3,175 Kg)
10 bar (145 psi)
1,000 lbs (453 kg)
Standard accessories:
H
SM951
• Automatic tire changer with a tilting back post pneumatically controlled
by a pedal, for conventional low profile and Run-Flat wheels of cars and
light commercial vehicles
• Dual clamping cylinders
• Adjustable table with inflators on each clamp
• Double Effect bead breaker
• Bead breaker shovel with Power-Out System
• Designed to operate on sport wheels with big size alloy rims, extra-low
profile and Run-Flat tires up to a maximum width of 16”.
• Clamping of rims from 10” to 28”
• Fully adjustable bead breaker with Smart Blade System
• Optional version SM951HP2, with a combo Help/Press arm for low
profile tires
• Comes fully assembled
• Made in Italy
TAGE
N
S
ADVA
Professional tire changer with Smart Blade
for cars and light truck wheels
ystem r
de S
rt Bla and easie
a
m
S
r
uicke eaking
for q
br
bead wheel
y
of an
TECHNICAL DATA
110VAC, 50/60 Hz, 1 ph
13” - 28”
10” - 26”
1,100 mm (43”)
415 mm (16”)
7,000 lbs (3,175 Kg)
10 bar (145 psi)
800 lbs (360 kg)
Standard accessories:
H
Swing arm tire changer
with table top inflators
• Suitable for car and light commercial wheels
• Clamping range 10” - 28”
• Air tank in tower
• Dual clamping cylinders
• Semi-automatic swing arm
• Inserts protect aluminum wheels
• Adjustable table with inflators on each clamp
• Adjustable bead breaker
• Optional Press Arm and bead pressing tool
for low profile tires
• Optional CEMBlast bead seating system
• Comes fully assembled
• Made in Italy
TAGE
N
S
ADVA
SM915ATI
Power requirements
Inside clamping range
Outside clamping range
Max. tire outside
Max. tire width
Bead breaker force
Operating pressure
Shipping weight
m
ss-ar andle
h
h Pre
• Wit nal) can wheels
(optio f today’s
o
most
s
flator
Top In l the
le
b
a
a
e
•T
you s
help
d
a
be
TECHNICAL DATA
Power requirements
Inside clamping range
Outside clamping range
Max. tire outside
Max. tire width
Bead breaker force
Operating pressure
Shipping weight
110VAC, 50/60 Hz, 1 ph
13” - 28”
10” - 26”
1,200 mm (47”)
380 mm (15”)
5,550 lbs (2,517 Kg)
10 bar (145 psi)
630 lbs (285 kg)
Standard accessories:
G
17
• Suitable for car and light commercial vehicle
• Clamping range 13” - 26”
• Air tank in tower
• Dual clamping cylinders
• Semi-automatic swing arm
• Inserts protect aluminum wheels
• Inflators on each clamp
• Optional Press Arm and bead pressing tool
for low profile tires
• Adjustable bead breaker
• Comes fully assembled
TAGE
N
S
ADVA
SM825
Semi-automatic tire changer with swing arm
y
sturd
very
m
level, h minimu
y
r
t
En
e wit nsions
in
h
c
e
ma
all dim
over
TECHNICAL DATA
Standard accessories:
G
Swing arm tire changer
for motorcycles and ATV’s
• Dual clamping cylinders
• Clamping range 6” - 24”
• Semi-automatic swing arm
• Inserts protect aluminum wheels
• Bead breaker designed for motorcycles and ATV’s
• Optional Press Arm
• Comes fully assembled
• Made in Italy
TAGE
N
cially
espe ATV’s
ned
d
ig
n
s
a
e
D
ycle
otorc eels
for m
h
w
18
110VAC, 50/60 Hz, 1 ph
15” - 26”
13” - 24”
1,200 mm (47”)
380 mm (15”)
5,550 lbs (2,517 Kg)
10 bar (145 psi)
630 lbs (285 kg)
S
ADVA
SM900+
Power requirements
Inside clamping range
Outside clamping range
Max. tire outside
Max. tire width
Bead breaker force
Operating pressure
Shipping weight
TECHNICAL DATA
Power requirements
Outside clamping range
Max. tire outside
Max. tire width
Bead breaker force
Operating pressure
Shipping weight
110VAC, 50/60 Hz, 1 ph
6” - 24”
1,010 mm (39”)
240 mm (9.5”)
5,550 lbs (2,517 Kg)
10 bar (145 psi)
485 lbs (220 kg)
Standard accessories:
F
SM56T
•Clamping range 14” - 46” (up to 56” with optional extensions)
•Mobile control unit
•Two speed motor
•Bi-directional rotation
•Self-centering universal wheel chuck
•Comes fully assembled
• Made in Italy
TAGE
N
S
ADVA
Universal tire changer
for trucks and bus wheels
and
, bus s,
ruck
tire
For t
e
r
u
ult
tire
agric nal truck
e
ssio
volum
e
f
h
o
r
ig
p
h
d
n
ea
s
servic
shop
TECHNICAL DATA
220VAC, 50/60 Hz, 3 ph
14” - 46” (56” with optional extensions)
2,300 mm (90.5”)
1,070 mm (42”)
3,300 lbs (1,500 Kg)
6,000 lbs (2,721 Kg)
130 bar (1,885 psi)
2,000 lbs (907 kg)
Standard accessories:
J
Universal tire changer
for trucks and bus wheels
•Clamping range 13” - 27”
•Mobile control unit
•Bi-directional rotation
•Self-centering universal wheel chuck
•Comes fully assembled
• Made in Italy
TAGE
N
S
ADVA
CM27T
Power requirements
Rim clamping range
Max. tire outside
Max. tire width
Max. tire weight
Bead breaker force
Operating pressure
Shipping weight
h
r bot
ble fo less tires
a
it
u
•S
tube
and
tube
to
ls up
whee Kg)
s
le
d
0
n
,50
• Ha
lbs (1
3,300
TECHNICAL DATA
Power requirements
Rim clamping range
Max. tire outside
Max. tire width
Max. tire weight
Bead breaker force
Operating pressure
Shipping weight
220VAC, 50/60 Hz, 1 ph
13” - 27”
1,600 mm (63”)
780 mm (30”)
3,300 lbs (1,500 Kg)
4,100 lbs (1,860 Kg)
130 bar (1,885 psi)
1,415 lbs (640 kg)
Standard accessories:
J
19
• Measurement of all required alignment specifications
• Targets with no electronics and batteries
• Optional VIN barcode scanner
• PC computer and storage cabinet
• Windows® operating system
• Brake pedal depressor and steering lock
• 24” TFT monitor, printer, keyboard, mouse
• Four 4-point clamps 12”- 24”* with
universal L=45mm grips and targets
* It does not mean rim diameter
• Complete car database with possible customization
• Alignment specification history of 40+ years
• Simple and user-friendly software
TAGE
N
S
ADVA
DWA3400
3D wheel alignment system
for cars and light trucks
nsor
se
• 3D
y
olog
techn
ly
riend
ser-f
nd u
ple a
•Sim are
softw
TECHNICAL DATA
Computer - 24” monitor - printer
Software and database for cars
Four 4-point clamps 12”-24” with universal pins and targets
Steering wheel lock and brake pedal depressor
N
8 camera CCD alignment system
for cars and light trucks
• Four wireless BT2 rechargeable alignment heads equipped with
lithium ion batteries for long life, clamps and charging station standard
• Optional VIN barcode scanner
• Laptop computer and storage cabinet standard
• Accelerometers (newest measuring technology)
• Windows® based software with multiple languages
• Brake pedal depressor and steering lock
• 24” TFT monitor and printer
• 24” wheel clamping range* (30” optional)
r
selle
best
* It does not mean rim diameter
• Power supply and USB BT2 antenna
• Complete car database with possible customization
• Alignment specification history of 40+ years
• Spoilers no problem with our spoiler program
TAGE
N
dly
frien
user- tware
d
n
f
ka
its so ht
Quic
ig
ks to
than eatherwe
f
and
ors.
s
n
e
s
TECHNICAL DATA
Laptop computer - 24” monitor - printer
Software and database with car and light trucks
4 car measuring heads
4 clamps + safety elastic band + 1 set of pins
Steering wheel lock and brake pedal depressor
20
Standard accessories:
S
ADVA
XL
DWA1000
e
ftwar
nt so
gnme r cars
li
a
l
ee
fo
• Wh atabase
and d
Standard accessories:
L
XLB
DWA1000
• Four wireless BT2 rechargeable alignment heads equipped with
lithium ion batteries for long life, clamps and charging station standard
• Optional VIN barcode scanner
• Laptop computer and storage cabinet
• Accelerometers (newest measuring technology)
• Windows® based software with multiple languages
• 24” wheel clamping range* (30” optional)
* It does not mean rim diameter
• Power supply and USB BT2 antenna
• Complete car database with possible customization
• Alignment specification histroy of 40+ years
• Spoilers no problem with our spoiler program
TAGE
N
S
ADVA
8 camera CCD basic alignment system
for cars and light trucks
TECHNICAL DATA
Laptop computer
Software and database with car and light trucks
4 car measuring heads
4 clamps + safety elastic band + 1 set of pins
Standard accessories:
K
8 camera CCD alignment system
for heavy-duty trucks and buses
• Four wireless BT2 rechargeable alignment truck heads equipped with
lithium ion batteries for long life, clamps and charging station standard
• PC computer and storage cabinet
• Accelerometers (newest measuring technology)
• Windows® based software with multiple languages
• Brake pedal depressor and steering lock
• 24” TFT monitor and printer
• 30” wheel clamping range*
* It does not mean rim diameter
• Handles large trucks with standard accessories
• Power supply and USB BT2 antenna
• Complete truck database with possible customization
• Alignment specification history of 30+ years
• Handles up to seven truck axles
TAGE
N
S
ADVA
XLT
DWA1000
ser
nd u e
ple a
ar
• Sim ly softw
nd
y
frie
olog
techn nce due
less
e
r
e
2 wire
f
r
inte
• BT
s any
vices
avoid tooth de
e
lu
B
o
t
s
head
s
ecial for truck
• Sp
d
e
n
ig
s
de
s
spec
truck
s
r
a
e
y
• 30
base
data
TECHNICAL DATA
Computer - 24” monitor - printer
Software and database with heavy-duty trucks
4 truck measuring heads
4 clamps with 30” extensions
3 sets of pins (standard, truck and dually)
Wheel grabber kit with 50” arm kit
Steering wheel lock and brake pedal depressor
Standard accessories:
M
21
STANDARD
ACCESSORIES
A
B
C
D
E
22
WHEEL BALANCERS STANDARD ACCESSORIES
STANDARD
ACCESSORIES
TIRE CHANGERS STANDARD ACCESSORIES
F
G
H
I
J
23
STANDARD
ACCESSORIES
WHEEL ALIGNMENT STANDARD ACCESSORIES
K
x4
x4
x4
L
x4
x4
x4
M
x4
x16
x4
x4
x4
x4
x8
N
24
x2
x4
x4
x4
x4
OPTIONAL
ACCESSORIES
CEMB® offers a very wide selection of optional accessories for wheel balancers,
tire changers and wheel alignment.
Here you will find a selection of the most common optional accessories.
WHEEL BALANCERS
ACCESSORY
41FF79255
WD + DC SPACER FOR WIDE WHEELS
41FF53532
UNIVERSAL BOLT PATTERN ADAPTOR UH20/2
41FF42048
CONE 4
40FF61043
VL/2 TRUCK CONE
40FF52417
3.8”-7.1” (97-180mm)
8.5” SUPER CONE (USE WITH 3PC TCK)
40FF43748
7.9”-8.7” (202-221mm)
2038767
2 PIECE TRUCK CONE KIT
41FF86174
3.8”-7.1” (97-180mm)
9212806-1
3 PIECE TRUCK CONE KIT
41FF53550
3.8”-7.1” (97-180mm)
41FF56189
CODE
NYLON MOUNTING HEAD (w/hardware)
2008402
3.5”-5.2” (89-132mm)
3013240
STUD ADAPTOR SR-USA
BEAD PRESSING TOOL
9208633
STUD ADAPTOR SR-USA SE2 (Pneumatic locking)
DROP CENTER TOOL
101159
WBL81 WHEEL LIFT
MOTORCYCLE CLAMPS
9235082
STAR ADAPTOR KIT SR215/2
41FF67879
4” EXTENSION CLAMPS
9214081
CONE 5 (for european trucks)
40FF43747
NYLON QUICK UNION KIT
9208996
ACCESSORY RACK
41FF03151
JAW PROTECTIONS
9234826
DAYTON ADAPTOR 20” – 22.5”
94FF37124
CM27T TUBELESS ROLLER
9218165
DAYTON ADAPTOR 22” – 24.5”
94FF37123
SM56T TUBELESS ROLLER
9299274
AF12 FOR HONDA
940013270
0.5”-1.4” (12-35mm)
BEAD LIFTING GUIDE LEVER
9299269
AF19 FOR HARLEY DAVIDSON
41FF86295
0.7”-1.4” (19-35mm)
ALLOY RIM PLIERS
9299271
HARLEY DAVIDSON SHAFT EXTENSION (15mm)
04C220001
56” EXTENSIONS
9235047
KAWASAKI-SUZUKI SHAFT EXTENSION (15mm)
04MC00001
SCREW CLAMPS
9299273
UNIVERSAL MOTORCYCLE ADAPTOR RMC20
41FF87401
TRUCK
BEAD BREAKER COVER
MOTORCYCLE
CAR
CAR
ACCESSORY
LOW PROFILE MOUNTING HEAD
TRUCK
CENTER HOLE RANGE
RL CUP FOR ALLOY RIMS
TIRE CHANGERS
ALLOY RIM KIT
CODE
41FF56193
46FL85170-KIT
11” (281mm)
0.6”-2.7” (15-68mm)
WHEEL ALIGNMENT
CODE
DWA1000XLB
DWA1000XL
DWA1000XLT
DWA3400
STEERING WHEEL HOLDER
ACCESSORY
74A010478
O
●
●
●
BRAKE PEDAL DEPRESSOR
74A010479
O
●
●
●
O
DUALLY WHEEL PINS
46DWA7510
O
O
●
SELF-CENTERING CLAMPS
74A000942
O
O
O
O
CLAMP EXTENSION UP TO 30”
46DW75803
O
O
●
O
DROP DOWN KIT
46DW89395
O
O
O
-
40” ARM KIT
46DW76312
O
O
O
O
50” ARM KIT
46DW91042
O
O
●
O
BACKUP CABLE KIT
86SB85932-4
O
O
O
-
CAR TURNPLATES
1300025140P
O
O
-
O
CAR REAR SLIP PLATES
1300020407
O
O
-
O
TRUCK TURNPLATES
130002524
O
O
O
-
TRUCK REAR GREASE PLATES
13000DB3030
O
O
O
-
WHEEL GRABBER KIT
46DW75331-40
O
O
●
-
13000DB24STANDKIT
O
O
-
-
13000DB24W
O
O
-
-
397000778
O
O
O
O
BANNER-WA
O
O
O
O
24" HIGH WHEEL STANDS
WHEEL STAND ROLLER KIT
DUST COVER
CEMB WHEEL ALIGNMENT BANNER
●
standard
O optional
- not available
For a complete list of accessories, compatibility and more information visit our website
WWW.CEMB-USA.COM
25
EQUIPMENT
COMPARISON
WHEEL BALANCERS COMPARISON
PORTABLE, HAND SPIN WITH BATTERY PACK
EZ1
EZ29
●
●
MOTORIZED
DATA ENTRY (DIMENSIONS)
M
2D
EZ9
ER71
ER72TD
ER73TD
ER75TD
ER100
●
●
●
●
●
●
2D
2D
3D
3D
3D
3D
O
●
●
●
●
AUTOMATIC WIDTH 3D
WHEEL LOCKING
M
QL
QL
QL
QL
QL
P
P
M
M
E
E
E
E
E
●
●
●
●
●
●
LED LIGHT
●
●
●
●
●
LASER LINE FOR STICK-ON WEIGHTS
●
SPOTTER LASER SYSTEM
●
●
●
●
FULL-TIME STATIC UNBALANCE ON SCREEN
●
●
●
●
●
●
STATIONARY BRAKE
WHEEL GUARD
VIDEO TOUCH SCREEN
O
WHEEL RUNOUT DIAGNOSTIC
●
O
PRINTER
●
O
O
O
O
O
●
12/110
110
110
110/220
110/220
110/220
110
MAXIMUM WHEEL WEIGHT (lbs)
100
165
165
165
165
165
165
165
MAXIMUM TIRE DIAMETER
N.A.
42”
36”
40”
42”
42”
42”
40”
40
40
40
40
40
40
40
40
POWER SUPPLY (V)
SHAFT DIAMETER (mm)
standard
O optional
M manual
QL quick lock
C206
PORTABLE, HAND SPIN WITH BATTERY PACK
E electric
C212
P pneumatic
C218
C202SE
●
●
●
●
DATA ENTRY (DIMENSIONS)
2D
2D
2D
2D
WHEEL LOCKING
M
MOTORIZED
M
M
P
STATIONARY BRAKE
P
P
P
WHEEL GUARD
●
●
●
FULL-TIME STATIC UNBALANCE ON SCREEN
●
●
●
●
●
WHEEL RUNOUT DIAGNOSTIC
WHEEL LIFT
M
P
P
P
12/110
110
110
230/400 3ph
MAXIMUM WHEEL WEIGHT (lbs)
550
550
550
550
MAXIMUM TIRE DIAMETER
51”
51”
51”
51”
SHAFT DIAMETER (mm)
40
40
40
60
POWER SUPPLY (V)
26
●
12/110
WHEEL LIFT
●
●
●
THREAD DEPTH AND CONICITY MEASUR.
●
●
●
AUTOMATIC POSITIONING
standard
M manual
P pneumatic
EQUIPMENT
COMPARISON
TIRE CHANGERS COMPARISON
SM825
SM915 ati
SM915 pro
SM951
INSIDE CLAMPING RANGE
15”-26”
13”-28”
13”-28”
13”-28”
OUTSIDE CLAMPING RANGE
13”-24”
10”-26”
10”-26”
10”-26”
MAXIMUM TIRE OUTSIDE
47”
47”
47”
43”
47”
MAXIMUM TIRE WIDTH
15”
15”
15”
16”
16”
DUAL CLAMPING CYLINDER
●
●
●
●
INFLATORS ON EACH CLAMP
●
●
●
O
●
ADJUSTABLE TABLE
●
●
●
●
●
●
●
●
●
●
SMART BLADE WITH POWER-OUT
●
●
LEVERLESS SYSTEM WITH DUAL FIT
●
SEMI-AUTOMATIC SWING ARM
●
●
●
TILT-BACK TOWER
●
OPERATNG PARALLEL ARM
ASSIST ARM FOR LOW PROFILE TIRES
O
O
●
WHEEL LIFT
O
O
O
110
110
110
POWER SUPPLY (V)
standard
2 versions
●
●
110
220 1ph
O optional
CM27T
SM56T
13”-27”
14”-46”
MAXIMUM TIRE OUTSIDE
63”
90.5”
MAXIMUM TIRE WIDTH
30”
42”
RIM CLAMPING RANGE
MAXIMUM TIRE WEIGHT (lbs)
3,300
3,300
MOBILE CONTROL UNIT
●
●
BI-DIRECTIONAL ROTATION
●
●
220 1ph
220 3ph
●
TWO-SPEED MOTOR
POWER SUPPLY (V)
●
12”-30”
CEMBLAST BEAD SEATING SYSTEM
ADJUSTABLE BEAD BREAKER
●
SM1120
standard
27
28
NOTES
29
NOTES
USGAR17-2.7
www.cemb-usa.com
Garage equipment division
CEMB® USA / BL Systems, Inc
Garage equipment division
2873 Ramsey Road
Gainesville, GA 30501 - USA
Phone +1 (678) 717-1050
Fax
+1 (678) 717-1056
sales@cemb-usa.com
MADE IN ITALY
DISTRIBUTED BY
Because of continuing technological advancements, specifications, models and options are subject to change without notice.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising