KL12 High technology ultra-light passive 12” subwoofer DATASHEET Features: • • • • • • Unique performance-to-size ratio High power 123dB continuous, 129dB peak Fitted with integral handles and castors Direct radiating, long excursion 12” driver Integrated 35mm pole adapter Ultra fast set-up and dismantling system Applications: • • • Theatrical sound reinforcement Concert halls, clubs, houses of worship Portable and installed audio-visual systems The KL12 is a high performance sub-bass system designed for use with small to medium wavefront systems, in both touring and install applications. It features large area porting to reduce air noise. The KL12 is ideal for small throw applications, like theaters, concert halls, AV installations. It features a 600 watt 12” drive unit with magnet structure and suspension engineered for maximum linear excursion. The ultra-light reflex cabinet is fitted with two pocket handles and one 35mm pole mounting point for easy installation with every satellite speaker on it. All the KL12 components are designed by K-array R&D department and custom made under K-array control quality system. www.k-array.com HP Sound Equipment s.r.l. Viale Roma 7/i - 50037 - San Piero a Sieve (FI), Italy tel. +39 055 8487222 - fax. +39 055 8487238 - e-mail: [email protected] KL12 Acoustics Speaker Power handling 600 W(AES) Max Power 1200 W 1 Impedance 4W Frequency range 40Hz - 150 Hz +/- 3dB SPL 1W/1mt 95 dB 2 Maximum SPL 123 dB continuous - 129 dB peak Coverage Horizontal Omni Vertical Omni Crossover Type External crossover required Frequency low pass @ 150 Hz Transducers Low - Mid frequency 2 x 12” 4 W Neodymium speakers with 3” voice coil Audio Input 2 x 4-pin speakon parallel IN/OUT Connectors Pin 1+ : IN + , Pin 1- : IN- , Pin 2+ : n.c. + , Pin 2- : n.c. Wiring Selection Switch Dispersion - Recommended Amplifiers KA10 Physical Dimensions 32.8 x 33.5 x 43.5 cm (12.91”x 13.19”x 17.13”) 12.20 Kg (26.9 lbs) Weight Notes for data 1. Maximum RMS applicable power for a musical signal, the reference signal is the one proposed by EIAJ standard. 2. Measured @4 mt then scaled @1 mt New materials and design are introduced into existing products without previous notice. Present systems may differ in some respects from those presented in this brochure.