D1100 Rear Panel Connections

D1100 Rear Panel Connections
3A
RIGHT OUTPUT 2 UNBALanced sends signals to a Power
Amplifier(s) and is switched On/
Off with the Front Panel Output
2 Push-Button or Remote Control
Push-Button
D1100 Rear Panel Connections
RIGHT OUTPUT 1 UNBALanced sends signals to a Power
Amplifier(s) and is switched On/
Off with the Front Panel Output
1 Push-Button or Remote Control
Push-Button
RIGHT OUTPUT 2 BALanced sends signals to a Power
Amplifier(s) and is switched On/
Off with the Front Panel Output
2 Push-Button or Remote Control
Push-Button
RIGHT FIXED OUTPUT UNBALanced sends analog signals
to various components
RIGHT OUTPUT 1 BALanced sends signals to a Power
Amplifier(s) and is switched On/
Off with the Front Panel Output
1 Push-Button or Remote Control
Push-Button
LEFT FIXED OUTPUT
BALanced sends analog
signals to various components
RIGHT FIXED OUTPUT
BALanced sends analog
signals to various components
LEFT OUTPUT 1 BALanced sends
signals to a Power Amplifier(s) and is
switched On/Off with the Front Panel
Output 1 Push-Button or Remote
Control Push-Button
LEFT FIXED OUTPUT
UNBALanced sends analog
signals to various components
LEFT OUTPUT 2 BALanced sends signals to a Power
Amplifier(s) and is switched On/
Off with the Front Panel Output
2 Push-Button or Remote Control
Push-Button
LEFT OUTPUT 2 UNBALanced sends signals to a Power
Amplifier(s) and is switched On/
Off with the Front Panel Output
2 Push-Button or Remote Control
Push-Button
LEFT OUTPUT 1 UNBALanced sends signals to
Power Amplifier(s) and is
switched On/Off with the
Front Panel Output 1 PushButton or Remote Control
Push-Button
ANALOG PREAMP
connection for
external control from an
Analog (Preamplifier)
Controller
AES/EBU XLR DIGITAL
AUDIO INPUT for components
with a Digital XLR Output
sending a digital audio signal
Connect the D1100 power
cord to a live AC outlet. Refer
to information on the back
panel of your D1100 to determine the correct voltage for
your unit
OPTIcal DIGITAL AUDIO
INPUTS for components
with a Digital Optical Output
sending a digital audio signal
COAXial DIGITAL AUDIO
INPUTS for components with a
Digital Coaxial Output sending
a digital audio signal
McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 FAX: 607-724-0549
USB DIGITAL AUDIO
INPUT for connection
to a computer
MCT DIGITAL AUDIO INPUT
for streaming high bandwidth
digital signals from SACD/CD
Transport Components
Part No. 04172900
DATA PORTS are assignable
to send signals to Source
Components to allow control with the D1100 Remote
Control
POWER CONTROL TRIGger
outputs 1 thru 4 are assignable
to send turn On/Off signals to
components
IR INput for
signals from a
compatible IR
Room Sensor
RS232 connector
for connection to a
computer or other
control device
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement