HMI - Visualisation Tools - Sirius Trading and Services

HMI - Visualisation Tools - Sirius Trading and Services
MITSUBISHI
ELECTRIC
Global partner. Local friend.
FACTORY AUTOMATION
HMI
Visualisation Tools
EUROPEAN BRANCHES
EUROPEAN REPRESENTATIVES
MITSUBISHI ELECTRIC EUROPE B.V.
FRANCE
25,Boulevard des Bouvets
F-92741 Nanterre Cedex
Phone +33 (0)1 / 55 68 55 68
MITSUBISHI ELECTRIC EUROPE B.V.
GERMANY
Gothaer Straße 8
D-40880 Ratingen
Phone +49 (0) 21 02/4 86-0
MITSUBISHI ELECTRIC EUROPE B.V.
IRELAND
Westgate Business Park,Ballymount
IRL-Dublin 24
Phone +353 (0)1 4198800
MITSUBISHI ELECTRIC EUROPE B.V.
ITALY
Viale Colleoni 7
I-20041 Agrate Brianza (MI)
Phone +39 039 / 60 53 1
MITSUBISHI ELECTRIC EUROPE B.V.
SPAIN
Carretera de Rubi 76-80
E-08190 Sant Cugat del Vallés (Barcelona)
Phone +34 93 / 565 3131
MITSUBISHI ELECTRIC EUROPE B.V.
UK
Travellers Lane
UK-Hatfield Herts. AL10 8 XB
Phone +44 (0)1707 / 27 61 00
GEVA
AUSTRIA
Wiener Straße 89
AT-2500 Baden
Phone:+43 (0)2252 / 85 55 20
TEHNIKON
BELARUS
Oktyabrskaya 16/5,Off.704
BY-220030 Minsk
Phone:+375 (0)17 / 210 46 26
Koning & Hartman b.v.
BELGIUM
Woluwelaan 31
BE-1800 Vilvoorde
Phone:+32 (0)2 / 257 02 40
AKHNATON
BULGARIA
4 Andrej Ljapchev Blvd.Pb 21
BG-1756 Sofia
Phone:+359 (0)2 / 97 44 05 8
INEA CR d.o.o.
CROATIA
Losinjska 4 a
HR-10000 Zagreb
Phone:+385 (0)1 / 36 940 - 01/ -02/ -03
AutoCont CS s.r.o. CZECH REPUBLIC
Jelinkova 59/3
CZ-721 00 Ostrava Svinov
Phone:+420 (0)59 / 5691 150
MITSUBISHI
ELECTRIC
FACTORY AUTOMATION
B:TECH A.S.
CZECH REPUBLIC
Na Ostrove 84
CZ-58001 Havlickuv Brod
Phone:+420 (0)569 / 408 841
Beijer Electronics A/S
DENMARK
Lautruphoj 1-3
DK-2750 Ballerup
Phone:+45 (0)70 / 26 46 46
Beijer Electronics Eesti OÜ ESTONIA
Pärnu mnt.160i
EE-11317 Tallinn
Phone:+372 (0)6 / 51 81 40
Beijer Electronics OY
FINLAND
Jaakonkatu 2
FIN-01620 Vantaa
Phone:+358 (0)207 / 463 500
UTECO A.B.E.E.
GREECE
5,Mavrogenous Str.
GR-18542 Piraeus
Phone:+30 211 / 1206 900
Meltrade Ltd.
HUNGARY
Fertõ utca 14.
HU-1107 Budapest
Phone:+36 (0)1 / 431-9726
Ilan & Gavish Ltd.
ISRAEL
24 Shenkar St.,Kiryat Arie
IL-49001 Petah-Tiqva
Phone:+972 (0)3 / 922 18 24
Kazpromautomatics Ltd. KAZAKHSTAN
2,Scladskaya str.
KAZ-470046 Karaganda
Phone:+7 3212 / 50 11 50
Beijer Electronics SIA
LATVIA
Vestienas iela 2
LV-1035 Riga
Phone:+371 (0)784 / 2280
Beijer Electronics UAB LITHUANIA
Savanoriu Pr.187
LT-02300 Vilnius
Phone:+370 (0)5 / 232 3101
Intehsis SRL
MOLDOVA
bld.Traian 23/1
MD-2060 Kishinev
Phone:+373 (0)22 / 66 4242
Koning & Hartman b.v. NETHERLANDS
Haarlerbergweg 21-23
NL-1101 CH Amsterdam
Phone:+31 (0)20 / 587 76 00
Beijer Electronics A/S
NORWAY
Postboks 487
NO-3002 Drammen
Phone:+47 (0)32 / 24 30 00
MPL Technology Sp.z o.o. POLAND
Ul.Krakowska 50
PL-32-083 Balice
Phone:+48 (0)12 / 630 47 00
Sirius Trading & Services ROMANIA
Str.Biharia nr.67-77
RO-013981 Bucuresti 1
Phone:+40 (0)21 / 201 1147
ELEKTROSTILY
RUSSIA
Rubzowskaja nab.4-3,No.8
RU-105082 Moscow
Phone:+7 495 / 545 3419
ICOS
RUSSIA
Ryazanskij Prospekt,8A,Office 100
RU-109428 Moscow
Phone:+7 495 / 232 0207
NPP “URALELEKTRA”
RUSSIA
Sverdlova 11A
RU-620027 Ekaterinburg
Phone:+7 343 / 353 2745
Craft Co.& Engineering d.o.o. SERBIA
Toplicina str.4 lok 6
SER-1800 Nis
Phone:+381(0)18/292-24-4/5,523962
Inea SR d.o.o.
SERBIA
Karadjordjeva 12/260
SER-113000 Smederevo
Phone:+381 (0)26 / 617 163
AutoCont Control s.r.o.
SLOVAKIA
Radlinského 47
SK-02601 Dolný Kubín
Phone:+421 (0)43 / 5868 210
CS Mtrade Slovensko s.r.o. SLOVAKIA
Vajanskeho 58
SK-92101 Piestany
Phone:+421 (0)33 / 7742 760
INEA d.o.o.
SLOVENIA
Stegne 11
SI-1000 Ljubljana
Phone:+386 (0)1 / 513 8100
Beijer Electronics AB
SWEDEN
Box 426
S-20124 Malmö
Phone:+46 (0)40 / 35 86 00
Econotec AG
SWITZERLAND
Hinterdorfstr.12
CH-8309 Nürensdorf
Phone:+41 (0)44 / 838 48 11
GTS
TURKEY
Darulaceze Cad.No.43 KAT.2
TR-34384 Okmeydani-Istanbul
Phone:+90 (0)212 / 320 1640
CSC Automation Ltd.
UKRAINE
15,M.Raskova St.,Fl.10,Office 1010
UA-02002 Kiev
Phone:+380 (0)44 / 494 33 55
CBI Ltd.
SOUTH AFRICA
Private Bag 2016
ZA-1600 Isando
Phone:+ 27 (0)11 / 928 2000
Mitsubishi Electric Europe B.V. /// FA - European Business Group /// Gothaer Straße 8 /// D-40880 Ratingen /// Germany
Tel.: +49(0)2102-4860 /// Fax: +49(0)2102-4861120 /// [email protected] /// www.mitsubishi-automation.com
Specifications subject to change /// Art. no. 207075-A /// 05.2007
All trademarks and copyrights acknowledged.
System and Process Visualisation /// Touch Screen and Key Operation ///
Powerful Maintenance Tools /// PLC Program Display /// Direct MES
Integration /// HMIs /// GOTs /// IPCs /// SCADA /// Software ///
High resolution screens offer bright
clear displays that can be viewed from
a wide range of angles.
With innovative technology Mitsubishi Electric has
created new standards in operator interaction. Features such as the ladder monitoring function enhance
and support the work of programmers, operators and
maintenance staff.
High-speed operation thanks to
fast processors.
Direct Connection to a SQL database through a dedicated MES interface gives users greater access to operational data from across their entire plant – and all
from the shop floor.
Ultra-slim designs occupy less
panel space/depth.
100’s of drivers are available for
connection to Mitsubishi or other
third party products.
All of the HMI software packages come with
pre-defined graphic libraries to help users get started
quickly. Some of the software programs also have simulators so that system operation can be checked
before downloading into an HMI or IPC.
Simple intuitive keyboards are complimented by flexible and dynamic touch screen solutions. Each type of
HMI solution allows data to be gathered from various
FA devices and facilitates its access as information
using powerful graphic and text tools.
High performance, market leading, operator terminals
are the result of intelligent yet carefully planned
design. For example front mounted USB ports make
programming and data access simpler and quicker
than ever before.
2
Units with high IP ratings ensure easy
and carefree cleaning, especially
useful for situations that require full
wash downs.
Advanced screen design software
such as GT Designer 2 enable
screens to be quickly and efficiently
created.
More design freedom through flexible
connectivity and mounting as many
units can be used in portrait or
landscape configurations.
Ultra slim mounting as well as optional screen orientation make Mitsubishi HMI’s simple and economical to
add to almost any system. Conformance to shipping
approvals and standards are a clear demonstration of
Mitsubishi’s commitment to quality.
Flexible operation allows Mitsubishi
HMIs to be used in industrial and
commercial applications.
3
High resolution screens offer bright
clear displays that can be viewed from
a wide range of angles.
With innovative technology Mitsubishi Electric has
created new standards in operator interaction. Features such as the ladder monitoring function enhance
and support the work of programmers, operators and
maintenance staff.
High-speed operation thanks to
fast processors.
Direct Connection to a SQL database through a dedicated MES interface gives users greater access to operational data from across their entire plant – and all
from the shop floor.
Ultra-slim designs occupy less
panel space/depth.
100’s of drivers are available for
connection to Mitsubishi or other
third party products.
All of the HMI software packages come with
pre-defined graphic libraries to help users get started
quickly. Some of the software programs also have simulators so that system operation can be checked
before downloading into an HMI or IPC.
Simple intuitive keyboards are complimented by flexible and dynamic touch screen solutions. Each type of
HMI solution allows data to be gathered from various
FA devices and facilitates its access as information
using powerful graphic and text tools.
High performance, market leading, operator terminals
are the result of intelligent yet carefully planned
design. For example front mounted USB ports make
programming and data access simpler and quicker
than ever before.
2
Units with high IP ratings ensure easy
and carefree cleaning, especially
useful for situations that require full
wash downs.
Advanced screen design software
such as GT Designer 2 enable
screens to be quickly and efficiently
created.
More design freedom through flexible
connectivity and mounting as many
units can be used in portrait or
landscape configurations.
Ultra slim mounting as well as optional screen orientation make Mitsubishi HMI’s simple and economical to
add to almost any system. Conformance to shipping
approvals and standards are a clear demonstration of
Mitsubishi’s commitment to quality.
Flexible operation allows Mitsubishi
HMIs to be used in industrial and
commercial applications.
3
Mitsubishi’s Vision 1000 concept brings
together a wide range of human machine
interfaces (HMIs) and software solutions
that let you see what is really happening in
the production process.
쐽 Open HMI solutions
The E1000 range of HMIs is designed and
built on the latest open technology combining Microsoft’s Windows CE platform
with Intel Xscale processors.
This combination of three visualization
technologies from a single manufacturer,
allows users to choose the best solution to
fit their requirements.
This leading edge technology delivers fast
and reliable operation ensuring maximum
uptime for HMI users.
쐽 Dedicated HMI solutions
The GOT1000 series of graphic operator
terminals provide the very latest in
touch-screen display technology. This
gives users a bright clear display of information with the flexibility of touch screen
input.
Central storage and control of FA device information with Mitsubishi HMIs
The GOT units are designed for fundamental integration with Mitsubishi automation
technology. This means easier, faster project development as well as increased system performance and additional access to
core functions in Mitsubishi’s automation
hardware.
Factory automation users want more transparency and more information on control
and machine processes.
In countless applications highly flexible
HMI and IPC units are an intelligent,
cost-effective alternative to bulky control
consoles. Both their size and their many
application advantages make them the
clearly superior choice.
The complete product range of the E series
A wide range of open HMI solutions
쐽 Industrial PC (IPC) solutions
Mitsubishi’s range of IPC1000 solutions
offer customers a robust platform for
developing their own solutions.They are
designed to provide the flexibility of highperformance PC power but with a sturdy
industrial design to protect them during
operation. This means users can install an
IPC1000 in their manufacturing environment with complete confidence.
A range of Mitsubishi automation software
called MELSOFT supports the IPCs. This
provides users with a choice of software
components that they can embed into
their own solution or complete visualization packages such as MX4SCADA.
In addition there are software support
packages for each of the HMI terminals.
They offer libraries of predefined functions
and images as well as an intuitive and flexible work environment.
MELSOFT is a wide range of software solutions
designed to optimize your plant productivity.
The GOT 1000 series utilises the latest touchscreen
technology
High performance industrial PCs
The complete product range of the GOT series
4
5
Mitsubishi’s Vision 1000 concept brings
together a wide range of human machine
interfaces (HMIs) and software solutions
that let you see what is really happening in
the production process.
쐽 Open HMI solutions
The E1000 range of HMIs is designed and
built on the latest open technology combining Microsoft’s Windows CE platform
with Intel Xscale processors.
This combination of three visualization
technologies from a single manufacturer,
allows users to choose the best solution to
fit their requirements.
This leading edge technology delivers fast
and reliable operation ensuring maximum
uptime for HMI users.
쐽 Dedicated HMI solutions
The GOT1000 series of graphic operator
terminals provide the very latest in
touch-screen display technology. This
gives users a bright clear display of information with the flexibility of touch screen
input.
Central storage and control of FA device information with Mitsubishi HMIs
The GOT units are designed for fundamental integration with Mitsubishi automation
technology. This means easier, faster project development as well as increased system performance and additional access to
core functions in Mitsubishi’s automation
hardware.
Factory automation users want more transparency and more information on control
and machine processes.
In countless applications highly flexible
HMI and IPC units are an intelligent,
cost-effective alternative to bulky control
consoles. Both their size and their many
application advantages make them the
clearly superior choice.
The complete product range of the E series
A wide range of open HMI solutions
쐽 Industrial PC (IPC) solutions
Mitsubishi’s range of IPC1000 solutions
offer customers a robust platform for
developing their own solutions.They are
designed to provide the flexibility of highperformance PC power but with a sturdy
industrial design to protect them during
operation. This means users can install an
IPC1000 in their manufacturing environment with complete confidence.
A range of Mitsubishi automation software
called MELSOFT supports the IPCs. This
provides users with a choice of software
components that they can embed into
their own solution or complete visualization packages such as MX4SCADA.
In addition there are software support
packages for each of the HMI terminals.
They offer libraries of predefined functions
and images as well as an intuitive and flexible work environment.
MELSOFT is a wide range of software solutions
designed to optimize your plant productivity.
The GOT 1000 series utilises the latest touchscreen
technology
High performance industrial PCs
The complete product range of the GOT series
4
5
The GOT1000 series has been designed
with the needs of the user in mind. For
example:
쐽 Diagnostics functions
The GOT1000 series’ innovative error
reporting system ensures fast troubleshooting and minimum downtime. Predefined screens provide direct access to the
PLCs I/Os and even the buffer memory of
special-function modules.
Features such as alarm handling, historical
trending and memory areas for storing
help texts or bitmaps also contribute to
rapid troubleshooting and fault correction.
GOT HMI's can help users see what is happening anywhere in their process.
The touch-sensitive control screen, which
greatly facilitates data entry and parameter
editing, is one of the most popular features
of the GOT operator terminals. Many users
find the easy touch screen operation and
flexible use enhance their HMI projects.
Mitsubishi’s GOT series offers a wide range
of models from small 3-colour touch
screens to large TFT’s and handheld units.
In addition there are multiple system
accessories that can add diverse capabilities such as networking, camera inputs and
direct MES integration depending upon
the GOT unit selected.
쐽 Transparent Mode
GOT1000 units can also allow users to
download programs to the connected
Mitsubishi PLC through the existing connection established with the GOT display
unit.
Furthermore, support for Unicode 2.1
enables users to easily create multi-language displays in languages as diverse as
Russian and Japanese. This is especially
useful for companies who export
machines. It enables them to be easily
localized while still maintaining a core system for the manufacturers engineers to
maintain service and support.
Brilliant colours in high resolution
쐽 Flexible program storage
The GOT units can be programmed with
the GT Works2 software package, which
runs on any Windows® compatible PC. Programs can be stored either in the control
unit’s integrated non-volatile RAM, in a
plug-in EPROM module or a CF card.
쐽 High resolution screens
High resolution screens, with up to 65,536
colours on selected GOT1000 units, can display complex graphics, photos, CAD drawings and even PDFs and office documents
such as MS Excel and WORD. This document flexibility allows the GOT to truly
become the shop floor information
resource as well as a data monitoring tool.
쐽 High-speed processing
A 64-bit RISC processor is combined with a
specially developed high-speed graphics
processor to make the GOT1000 units fast
and responsive to user inputs, changes in
data and display drawing times.
6
In addition to the wide ranging support for
Mitsubishi PLC’s, frequency inverters and
servo amplifiers, GOT1000 series can also
be connected to an increasing range of
automation products from other manufacturers. This enables users to build a common visualization strategy for their
operation independently of the control
solution used.
Display:
From Monochrome LCD to STN
or TFT 65.536 colours
Resolution:
From 128 x 64 up to 1024 x 768
Function keys:
Except of 2 units, all panels have touch
screen and definable touch keys
GOT1000 units can be used globally with their support for Unicode characters
Networks capability:
Ethernet, CC-Link, MELSECNET/10*
Interface:
RS232C, RS422, RS485, USB*
*not available for all units
An integrated server function allows the
monitoring and data collection of information by a remote personal computer. Error
information can also be checked and transmitted to the PC. This feature makes data
and system maintenance functions very
easy as there is no longer any need to visit
every factory to collect data or status information from every GOT.
7
The GOT1000 series has been designed
with the needs of the user in mind. For
example:
쐽 Diagnostics functions
The GOT1000 series’ innovative error
reporting system ensures fast troubleshooting and minimum downtime. Predefined screens provide direct access to the
PLCs I/Os and even the buffer memory of
special-function modules.
Features such as alarm handling, historical
trending and memory areas for storing
help texts or bitmaps also contribute to
rapid troubleshooting and fault correction.
GOT HMI's can help users see what is happening anywhere in their process.
The touch-sensitive control screen, which
greatly facilitates data entry and parameter
editing, is one of the most popular features
of the GOT operator terminals. Many users
find the easy touch screen operation and
flexible use enhance their HMI projects.
Mitsubishi’s GOT series offers a wide range
of models from small 3-colour touch
screens to large TFT’s and handheld units.
In addition there are multiple system
accessories that can add diverse capabilities such as networking, camera inputs and
direct MES integration depending upon
the GOT unit selected.
쐽 Transparent Mode
GOT1000 units can also allow users to
download programs to the connected
Mitsubishi PLC through the existing connection established with the GOT display
unit.
Furthermore, support for Unicode 2.1
enables users to easily create multi-language displays in languages as diverse as
Russian and Japanese. This is especially
useful for companies who export
machines. It enables them to be easily
localized while still maintaining a core system for the manufacturers engineers to
maintain service and support.
Brilliant colours in high resolution
쐽 Flexible program storage
The GOT units can be programmed with
the GT Works2 software package, which
runs on any Windows® compatible PC. Programs can be stored either in the control
unit’s integrated non-volatile RAM, in a
plug-in EPROM module or a CF card.
쐽 High resolution screens
High resolution screens, with up to 65,536
colours on selected GOT1000 units, can display complex graphics, photos, CAD drawings and even PDFs and office documents
such as MS Excel and WORD. This document flexibility allows the GOT to truly
become the shop floor information
resource as well as a data monitoring tool.
쐽 High-speed processing
A 64-bit RISC processor is combined with a
specially developed high-speed graphics
processor to make the GOT1000 units fast
and responsive to user inputs, changes in
data and display drawing times.
6
In addition to the wide ranging support for
Mitsubishi PLC’s, frequency inverters and
servo amplifiers, GOT1000 series can also
be connected to an increasing range of
automation products from other manufacturers. This enables users to build a common visualization strategy for their
operation independently of the control
solution used.
Display:
From Monochrome LCD to STN
or TFT 65.536 colours
Resolution:
From 128 x 64 up to 1024 x 768
Function keys:
Except of 2 units, all panels have touch
screen and definable touch keys
GOT1000 units can be used globally with their support for Unicode characters
Networks capability:
Ethernet, CC-Link, MELSECNET/10*
Interface:
RS232C, RS422, RS485, USB*
*not available for all units
An integrated server function allows the
monitoring and data collection of information by a remote personal computer. Error
information can also be checked and transmitted to the PC. This feature makes data
and system maintenance functions very
easy as there is no longer any need to visit
every factory to collect data or status information from every GOT.
7
The E1000 and its predecessor, MAC E
series HMI’s, have a long history of pioneering HMI design. Over many years development and the accumulated experience of
thousands of users has sharpened these
HMIs to become the leading edge products
many users are now familiar with. Features
that have remained the keystone of this
success include:
쐽 Multi-language support
All the MAC E and E1000 units support
multi-language applications created within
the programming software. These applications allow the operators to select the user
interface language they wish to use as
Unicode is supported.
E1000 is designed to give a window into the manufacturing process.
쐽 Dual driver support
All E series operator terminals (except the
MAC E50) can access two different systems
simultaneously acting as a protocol converter or as an information gateway. This
has enabled many users to create systems
that span many third party automation
products that would not normally be possible.
This functionality is supported both on the
standard RS232C and RS422 ports and via
the extended Profibus/DP and Ethernet
interfaces. For example, you can write data
words from a PLC directly into the parameter settings of a frequency inverter.
Display:
From Monochrome LCD to STN
or TFT 65.536 colours
In addition, by using E1000 utilities and
tools, remote “viewing” of the locally displayed screen is also possible across an
intranet or internet connection making
sure you know exactly what is going on at a
machine level.
Resolution:
From 16 x 2 up to 80 x 60 char
(640 x 480)
Function keys:
From 4 to 50
(physical or touch screen)
Networks capability:
Profibus/DP, Ethernet*
By combining the latest Intel XScale RISC
processor with 32 MB of Strataflash and
64 MB RAM, the E1000 not only offers high
performance while running Windows
CE.NET but also security and “peace of
mind“.
With this powerful combination of technology valuable production data and machine
operational information is protected even
if a power failure occurs during a file write
process.
Mitsubishi’s E1000 series of HMIs offer
operator display solutions from small easy
text displays to large multi-colour, high resolution, graphic displays with touch screen.
These practical operator terminals can
often replace an entire control console.
They enable an operator to manage and if
need be intervene in the application by
very easily changing the process data
parameters. The units in the E1000 series
perfectly match the MELSEC range of controllers and are very simple to operate.
Interface:
RS232C, RS422*, RS485*, USB*
Data storage and sharing are important
functions of the manufacturing process
and operator terminals are quickly becoming the gateway to that data. The E1000
series makes access to data easier and
more flexible than ever before. Users can
choose between the use of:
*not available for all units
쐽 Combined Ethernet – internet connectivity for factory wide or global access
to data.
쐽 Direct connection to a modem for
simple remote telemetry solution
(GSM/GPRS/PSTN) where a system may
be installed at an inaccessible location.
쐽 A new external CF data card interface
on the front of the E1000 also means
data can be “taken” away on a removable data card for safe/permanent storage and processing.
쐽 Local printing directly from the HMI
display is also possible where a local
hard copy of processed data is
required.
The E1000 series operator terminals provide a huge leap forward in display technology, as ergonomics and ease of use
were central to the new series design. The
E1000 proves again how open HMI technology can be the key to integrated automation.
High performance in the most demanding applications
Highly compatible
8
9
The E1000 and its predecessor, MAC E
series HMI’s, have a long history of pioneering HMI design. Over many years development and the accumulated experience of
thousands of users has sharpened these
HMIs to become the leading edge products
many users are now familiar with. Features
that have remained the keystone of this
success include:
쐽 Multi-language support
All the MAC E and E1000 units support
multi-language applications created within
the programming software. These applications allow the operators to select the user
interface language they wish to use as
Unicode is supported.
E1000 is designed to give a window into the manufacturing process.
쐽 Dual driver support
All E series operator terminals (except the
MAC E50) can access two different systems
simultaneously acting as a protocol converter or as an information gateway. This
has enabled many users to create systems
that span many third party automation
products that would not normally be possible.
This functionality is supported both on the
standard RS232C and RS422 ports and via
the extended Profibus/DP and Ethernet
interfaces. For example, you can write data
words from a PLC directly into the parameter settings of a frequency inverter.
Display:
From Monochrome LCD to STN
or TFT 65.536 colours
In addition, by using E1000 utilities and
tools, remote “viewing” of the locally displayed screen is also possible across an
intranet or internet connection making
sure you know exactly what is going on at a
machine level.
Resolution:
From 16 x 2 up to 80 x 60 char
(640 x 480)
Function keys:
From 4 to 50
(physical or touch screen)
Networks capability:
Profibus/DP, Ethernet*
By combining the latest Intel XScale RISC
processor with 32 MB of Strataflash and
64 MB RAM, the E1000 not only offers high
performance while running Windows
CE.NET but also security and “peace of
mind“.
With this powerful combination of technology valuable production data and machine
operational information is protected even
if a power failure occurs during a file write
process.
Mitsubishi’s E1000 series of HMIs offer
operator display solutions from small easy
text displays to large multi-colour, high resolution, graphic displays with touch screen.
These practical operator terminals can
often replace an entire control console.
They enable an operator to manage and if
need be intervene in the application by
very easily changing the process data
parameters. The units in the E1000 series
perfectly match the MELSEC range of controllers and are very simple to operate.
Interface:
RS232C, RS422*, RS485*, USB*
Data storage and sharing are important
functions of the manufacturing process
and operator terminals are quickly becoming the gateway to that data. The E1000
series makes access to data easier and
more flexible than ever before. Users can
choose between the use of:
*not available for all units
쐽 Combined Ethernet – internet connectivity for factory wide or global access
to data.
쐽 Direct connection to a modem for
simple remote telemetry solution
(GSM/GPRS/PSTN) where a system may
be installed at an inaccessible location.
쐽 A new external CF data card interface
on the front of the E1000 also means
data can be “taken” away on a removable data card for safe/permanent storage and processing.
쐽 Local printing directly from the HMI
display is also possible where a local
hard copy of processed data is
required.
The E1000 series operator terminals provide a huge leap forward in display technology, as ergonomics and ease of use
were central to the new series design. The
E1000 proves again how open HMI technology can be the key to integrated automation.
High performance in the most demanding applications
Highly compatible
8
9
쐽 The economical solution
Not all applications require full PC expansion and processing. This is exactly where
the IPCs of the MicroClient series are in a
class of their own. These ultra compact
Panel PCs provide basic PC operation and
offer a choice of 12.1” and 15” displays. The
MicroClient solution provides entry level
PC power and rugged design all for a budget price.
For reducing the unit size and removing
one of the major moving parts that could
fail, the MicroClient panels are also
designed to operate without a cooling fan.
Industrial PCs are especially contructed for heavy-duty industrial applications
GT Works2 is a single software environment that can be used to develop screen
designs/content for either a PC/IPC or a traditional hardware unit such as the
GOT1000 series.
This flexibility from a single design tool
means reduced cost of ownership as users
only have to learn one software tool. In
addition there is a greater re-use of existing
projects.
쐽 Full processing power
Mitsubishi’s V-Panel Express series provides
all of the traditional PC flexibility users
expect. Expandable configurations including up to 2 PCI cards and a choice of 15” or
17” displays mean users can tailor their IPC
to their own requirements. The V-Panel
Express series does not need a cooling fan.
GT Works2
GT Works2, comprehensive yet flexible
One project
2 targets
The Mitsubishi’s Industrial PC (IPC) range is
ruggedly designed for heavy duty industrial applications and environments. These
PCs feature high quality, fast performance,
attractive design and brilliantly legible displays. They are ideal as process visualisation platforms, particularly in combination
with the GT SoftGOT1000 and SCADA software packages.
Rugged and industrial in design and performance
When your requirements exceed the limits
of a traditional HMI control unit, you need a
PC-based system.
The new IPC1000 Series terminals are available in two basic formats, the MicroClient
series and the fully featured V-Panel
Express series.
쐽 Rugged design
A wide operating and storage temperature
range, tough vibration resistance and high
IP ratings mean Mitsubishi’s IPCs can be
used in many locations.
10
Display:
TFT from 12.1” to 17” touch screen
Resolution:
From 800 x 600 up to 1280 x 1024
GT Works2 offers a comprehensive library
of graphical elements that enable users of
any skill level to quickly create the screen
designs they need.
GOT1000
IPC with
SoftGOT
Flexible project targeting
Processor:
Intel Celeron M 800 MHz or
Pentium M 1,5 GHz
Basic memory:
512 MB (RAM)
GT Works2 is a multi tool software solution
which include:
Built in harddisk:
40 GB
쐽 GT Designer2
This is the core design and development
software.
Interfaces*:
1 x RS232C, 1 to 5 x USB 2.0,
1 x 10/100 MBaud Ethernet,
1 x 1000 MBaud Ethernet (only V-Panel
Express)
*not available for all units
쐽 GT Simulator2
A simulation package that allows users to
simulate their projects operation as if it
were really installed on a GOT1000.
쐽 GT SoftGOT1000
A PC based HMI environment that allows
users to deploy their created HMI screen
directly to a PC or IPC.
Integrated wizards, user-friendly menus
and helpful dialog boxes enable users to
set-up projects, complete security settings
and change language settings with a minimum of fuss.
GT Designer2 has a comprehensive graphic library.
Debugging and commissioning can be an
expensive and time consuming activity.
However, with GT Works2 the integrated
simulation software allows users to check
the function and operation of their screen
designs without any additional hardware.
This can significantly help reduce costs and
development time.
In addition if GX Developer and GX Simulator are also used then the combined PLC
and HMI solution can be tested and
debugged even before any electrical panels have been purchased or even wired.
11
쐽 The economical solution
Not all applications require full PC expansion and processing. This is exactly where
the IPCs of the MicroClient series are in a
class of their own. These ultra compact
Panel PCs provide basic PC operation and
offer a choice of 12.1” and 15” displays. The
MicroClient solution provides entry level
PC power and rugged design all for a budget price.
For reducing the unit size and removing
one of the major moving parts that could
fail, the MicroClient panels are also
designed to operate without a cooling fan.
Industrial PCs are especially contructed for heavy-duty industrial applications
GT Works2 is a single software environment that can be used to develop screen
designs/content for either a PC/IPC or a traditional hardware unit such as the
GOT1000 series.
This flexibility from a single design tool
means reduced cost of ownership as users
only have to learn one software tool. In
addition there is a greater re-use of existing
projects.
쐽 Full processing power
Mitsubishi’s V-Panel Express series provides
all of the traditional PC flexibility users
expect. Expandable configurations including up to 2 PCI cards and a choice of 15” or
17” displays mean users can tailor their IPC
to their own requirements. The V-Panel
Express series does not need a cooling fan.
GT Works2
GT Works2, comprehensive yet flexible
One project
2 targets
The Mitsubishi’s Industrial PC (IPC) range is
ruggedly designed for heavy duty industrial applications and environments. These
PCs feature high quality, fast performance,
attractive design and brilliantly legible displays. They are ideal as process visualisation platforms, particularly in combination
with the GT SoftGOT1000 and SCADA software packages.
Rugged and industrial in design and performance
When your requirements exceed the limits
of a traditional HMI control unit, you need a
PC-based system.
The new IPC1000 Series terminals are available in two basic formats, the MicroClient
series and the fully featured V-Panel
Express series.
쐽 Rugged design
A wide operating and storage temperature
range, tough vibration resistance and high
IP ratings mean Mitsubishi’s IPCs can be
used in many locations.
10
Display:
TFT from 12.1” to 17” touch screen
Resolution:
From 800 x 600 up to 1280 x 1024
GT Works2 offers a comprehensive library
of graphical elements that enable users of
any skill level to quickly create the screen
designs they need.
GOT1000
IPC with
SoftGOT
Flexible project targeting
Processor:
Intel Celeron M 800 MHz or
Pentium M 1,5 GHz
Basic memory:
512 MB (RAM)
GT Works2 is a multi tool software solution
which include:
Built in harddisk:
40 GB
쐽 GT Designer2
This is the core design and development
software.
Interfaces*:
1 x RS232C, 1 to 5 x USB 2.0,
1 x 10/100 MBaud Ethernet,
1 x 1000 MBaud Ethernet (only V-Panel
Express)
*not available for all units
쐽 GT Simulator2
A simulation package that allows users to
simulate their projects operation as if it
were really installed on a GOT1000.
쐽 GT SoftGOT1000
A PC based HMI environment that allows
users to deploy their created HMI screen
directly to a PC or IPC.
Integrated wizards, user-friendly menus
and helpful dialog boxes enable users to
set-up projects, complete security settings
and change language settings with a minimum of fuss.
GT Designer2 has a comprehensive graphic library.
Debugging and commissioning can be an
expensive and time consuming activity.
However, with GT Works2 the integrated
simulation software allows users to check
the function and operation of their screen
designs without any additional hardware.
This can significantly help reduce costs and
development time.
In addition if GX Developer and GX Simulator are also used then the combined PLC
and HMI solution can be tested and
debugged even before any electrical panels have been purchased or even wired.
11
This is complimented by a library of
ready-to-use symbols and objects which
speed up screen design and creation.
Users who export control systems with
local language displays will find E-Designers multilingual project support a big benefit. Up to ten screen languages can be
loaded in to a small database allowing
operators to switch between any loaded
languages. All text blocks from the database can be easily exported and imported
with the Application Languages Manager.
Increase your Return On Assets (ROA) with
MX4 SCADA, delivering scalable, flexible
and reliable control and monitoring systems that reduce your operating costs and
improve productivity. A fully integrated
package, MX4 SCADA’s easy-to use configuration tools and powerful features enable
you to quickly develop and deploy solutions which can handle the most complex
requirements for any size enterprise.
Communication drivers for all MELSEC PLCs
and many third-party PLCs are available as
standard. These can be updated online via
the Internet without exiting E-Designer.
Powerful software that enhances your productivity
Clear and powerul communication for all levels of
application
The E-Designer software helps users to
quickly start creating screen designs for
use on MAC E and E1000 terminal units.
Its intuative design excellently supports
new users but also enhances the productivity of experienced users.
Dual driver technology
E-Designer has many features designed to
improve the working process, for example
the software’s Block Manager gives a complete graphical overview of a project, making project management and debugguing
easier and quicker.
Scalable, flexible, reliable
Simultaneous connection using dual driver technology
쐽 Tailored solutions
MX4 SCADA ‘s exceptional flexibility maximizes your productivity by allowing user to
create optimal system architectures in the
way that best suits them -giving access to
both centralised and distributed processing.
쐽 Scalable solutions
Based on Microsoft technologies, MX4
SCADA has been designed with an innovative, scalable architecture. This preserves
your initial investment by allowing your
system to grow with your requirements,
without modifying system hardware or
software.
쐽 Reliable and redundant solutions
MX4 SCADA minimizes downtime by offering unrivalled reliability. It utilizes DCS
style, built-in, redundancy that can tolerate
system failures anywhere with no loss of
functionality or performance.
쐽 Business benefits
Integrating MX4 with business systems lets
users maximise productivity, improve
product quality and reduce both maintenance and operating costs.
쐽 Free development package
MX4 is available as a free development
package, which helps to reduce the cost of
usage. Key features include graphical process visualisation, historical/real time
trending and advanced alarming and
reporting.
The installation procedure is customisable
and totally scalable - simply upgraded with
a new software key. It is also fully compatible with MX4 HMI. FastLinx is included with
MX4 for fast and simple interfacing to
MELSEC PLCs.
쐽 Simple to configure
A full set of user expandable libraries with
graphics symbols and templates are
included.
There are also other time saving features
such as express Wizards for PLC communications, Genies for configuration of complex animation objects and Super Genies
for repetitive plant processes.
Intuative operation aids quick project creation
12
13
This is complimented by a library of
ready-to-use symbols and objects which
speed up screen design and creation.
Users who export control systems with
local language displays will find E-Designers multilingual project support a big benefit. Up to ten screen languages can be
loaded in to a small database allowing
operators to switch between any loaded
languages. All text blocks from the database can be easily exported and imported
with the Application Languages Manager.
Increase your Return On Assets (ROA) with
MX4 SCADA, delivering scalable, flexible
and reliable control and monitoring systems that reduce your operating costs and
improve productivity. A fully integrated
package, MX4 SCADA’s easy-to use configuration tools and powerful features enable
you to quickly develop and deploy solutions which can handle the most complex
requirements for any size enterprise.
Communication drivers for all MELSEC PLCs
and many third-party PLCs are available as
standard. These can be updated online via
the Internet without exiting E-Designer.
Powerful software that enhances your productivity
Clear and powerul communication for all levels of
application
The E-Designer software helps users to
quickly start creating screen designs for
use on MAC E and E1000 terminal units.
Its intuative design excellently supports
new users but also enhances the productivity of experienced users.
Dual driver technology
E-Designer has many features designed to
improve the working process, for example
the software’s Block Manager gives a complete graphical overview of a project, making project management and debugguing
easier and quicker.
Scalable, flexible, reliable
Simultaneous connection using dual driver technology
쐽 Tailored solutions
MX4 SCADA ‘s exceptional flexibility maximizes your productivity by allowing user to
create optimal system architectures in the
way that best suits them -giving access to
both centralised and distributed processing.
쐽 Scalable solutions
Based on Microsoft technologies, MX4
SCADA has been designed with an innovative, scalable architecture. This preserves
your initial investment by allowing your
system to grow with your requirements,
without modifying system hardware or
software.
쐽 Reliable and redundant solutions
MX4 SCADA minimizes downtime by offering unrivalled reliability. It utilizes DCS
style, built-in, redundancy that can tolerate
system failures anywhere with no loss of
functionality or performance.
쐽 Business benefits
Integrating MX4 with business systems lets
users maximise productivity, improve
product quality and reduce both maintenance and operating costs.
쐽 Free development package
MX4 is available as a free development
package, which helps to reduce the cost of
usage. Key features include graphical process visualisation, historical/real time
trending and advanced alarming and
reporting.
The installation procedure is customisable
and totally scalable - simply upgraded with
a new software key. It is also fully compatible with MX4 HMI. FastLinx is included with
MX4 for fast and simple interfacing to
MELSEC PLCs.
쐽 Simple to configure
A full set of user expandable libraries with
graphics symbols and templates are
included.
There are also other time saving features
such as express Wizards for PLC communications, Genies for configuration of complex animation objects and Super Genies
for repetitive plant processes.
Intuative operation aids quick project creation
12
13
Robots
In fact some HMIs have the ability to report
errors remotely, even contacting the maintenance team before the line operators are
aware there is a problem. The potential of
visualisation tools to improve process
“uptime” is enormous.
Servo amplifiers
Enterprise PC
(MES/ERP/SCADA)
Motion control and servos
Inverters
LV circuit protection
Remote I/Os
Pressure
storage tank
Transport
conveyor (OUT)
Filling tubes
Rotational
conveyor
Transport
conveyor (IN)
Frequency Inverter
PLC
Local HMI, plant
wide information
HMI technology can easily consolidate information at one point.
Laser machines
Fast data retrieval, greater transparency
require simplier and more effiecient control architectures. Because of this the
demand for high reliability SCADA and PC
based solutions is critical especially when
feeding data in to a businesses central MES
and ERP systems. But even now it is possible to see a future trend for embeding
direct MES functionality in to PLC stations
and high function HMIs. This can provide
huge gains for the manufacturer, i.e.;
reducing system complexity by removing a
layer of intermedary PCs; increased data
security by providing quicker respose and
industrialised hardware; localised control
points giving increased access to vital information.
CNC
controllers
HMI and GOTs
EDM machines
Micro PLCs
The use of HMI technology has been
increasing as manufacturers increasingly
demand information in realtime. The
boundries between “shop floor” data and
business operation/process data is fast
becoming blurred and places higher
demands on visualisation and data processing tools to span the wide range of
“new” applications.
Using visualisation tools to support maintenance has never been high on the
agenda of machine and process engineers,
but if system downtime is considered as
one of the most costly problems manufacturers face, then why not? HMI screen’s can
be configured to easily report on all of the
critical control aspects of a system aiding
efficient problem diagnosis.
14
Modular PLCs
As a manufacturer and supplier of automation products Mitsubishi Electric has long
recognised these key issues and has developed solutions for its own complex production needs. This has resulted in many
innovations such as GOT displays that have
“built in” maintetance screens as well as the
ability to review and monitor PLC programs. Other advances include MES interfaces for direct connection of PLC and HMI
technology to MES SQL databases.
Mitsubishi’s Vision1000 visualisation solutions are a clear part of today’s [email protected]
helping manufacturers increase productivity in a scalable and reliable way.
Mitsubishi offer a wide range of automation equipment from PLCs and HMIs to CNC and EDM machines
Since its beginnings in 1870, some 45 companies use the Mitsubishi name, covering a
spectrum of finance, commerce and industry.
The Mitsubishi brand name is recognized
around the world as a symbol of premium
quality.
Mitsubishi Electric Corporation represents
space development, transportation, semiconductors, energy systems, communications and information processing, audio
visual equipment, home electronics, building and energy management and automation systems, and has 237 factories and
laboratories worldwide in over 121 countries.
This is why you can rely on a Mitsubishi
automation solution – because we know
first hand about the need for reliable, efficient, easy-to-use automation and control.
As one of the world’s leading companies
with a global turnover of 3.4 trillion Yen
(approximately $30.8 billion), employing
over 100,000 people, Mitsubishi Electric
has the resource and the commitment to
deliver the ultimate in service and support
as well as the best products.
15
Farbprofil: Deaktiviert
Komposit Standardbildschirm
/// GOT1000 /// E1000 /// IPC1000 ///
Technical Information Section
HMI-Catalogue 2007 UK01-24.prn
HMI-Catalogue 2007 UK
Dienstag, 29. Mai 2007 19:15:07
1
Farbprofil: Deaktiviert
Komposit Standardbildschirm
Further Publications within the Factory Automation Range
Technical catalogue System Q
Technical
Catalogues
Product catalogues for programmable logic controllers and
accessories for the further MELSEC PLC series
Technical catalogue Alpha and FX family
Product catalogues for programmable logic controllers and
accessories for the Alpha and FX families
Technical catalogue Frequency inverters
Product catalogue for frequency inverters and accessories
Technical catalogues MELSERVO and Motion Controllers
Product catalogues for servo motors and amplifiers of the
MR-J2S Series and Motion Controllers with SSCNET
Technical catalogue Robots
Product catalogue forMELFA industrial robots and accessories
More information?
This technical catalogue is designed to give an overview of the extensive range of operator terminals of the GOT, E series and Industrial
PCs and Visualization software. If you cannot find the information you require in this catalogue, there are a number of ways you can get
further details on configuration and technical issues, pricing and availability.
For technical issues visit the www.mitsubishi-automation.com website.
Our website provides a simple and fast way of accessing further technical data and up to the minute details on our products and
services. Manuals and catalogues are available in several different languages and can be downloaded for free.
For technical, configuration, pricing and availability issues contact our distributors and partners.
Mitsubishi partners and distributors are only too happy to help answer your technical questions or help with configuration building.
For a list of Mitsubishi partners please see the back of this catalogue or alternatively take a look at the “contact us”section of our website.
About this technical catalogue
This catalogue is a guide to the range of products available. For detailed configuration rules, system building, installation and configuration the associated product manuals must be read. You must satisfy yourself that any system you design with the products in this catalogue is fit for purpose, meets your requires and conforms to the product configuration rules as defined in the product manuals.
Specifications are subject to change without notice. All trademarks acknowledged.
© Mitsubishi Electric Europe B.V., Factory Automation - European Business Group, 05/2007, 1st edition
2
HMI-Catalogue 2007 UK01-24.prn
HMI-Catalogue 2007 UK
Dienstag, 29. Mai 2007 19:15:12
MITSUBISHI ELECTRIC
2
Farbprofil: Deaktiviert
Komposit Standardbildschirm
/// CONTENTS
1 Introduction and Configuration
웇 Introduction of the HMI control units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
웇 HMI and networks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2 GOT Series Control Terminals
웇 System description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
웇 Panel description and specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
3 E Series Operator Terminals
웇 System description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
웇 Panel description and specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
4 Industrial PC´s
웇 Panel description and specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
5 Accessories
웇
웇
웇
웇
Converter, interface modules for GT15, option cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Cables. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Interface converter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Stands, Protective film sheets, keyboard extension, communications adapters etc. . . . . . . . . . . . . . . . . . . . . . . . . . 24
6 Dimensions
웇 GOT series control terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
웇 E series operator terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
웇 Industrial PC´s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
7 Software & Programming
웇 Visualization software MX4 HMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
웇 Programming software for GOT series control terminals GT-Works2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
웇 Programming software for E series operator terminals E-Designer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Das Inhaltsverzeichnis wird nach der Freigabe aktualisiert!
3
MITSUBISHI ELECTRIC
HMI-Catalogue 2007 UK01-24.prn
HMI-Catalogue 2007 UK
Dienstag, 29. Mai 2007 19:15:15
3
Farbprofil: Deaktiviert
Komposit Standardbildschirm
/// INTRODUCTION AND CONFIGURATION
INTRODUCTION AND CONFIGURATION
HMI Control Units for Human-Machine Communication
The interface between human and
technology
Features
앬 Simple installation and user-friendly
앬 Report generation for quality control
Users of today’s factory automation systems want more and clearer information
on the control systems of their plant and
machinery. HMI control terminals and process visualisation software enable an informative dialogue between operator and
machine, making them the ideal complement to the MELSEC PLC systems and
other factory automation components.
HMI control units make factory system
functions transparent, enabling the
operator to monitor and edit process data
quickly and easily.
You can choose between HMI control units
with text and graphical displays. Fully programmable function keys and displays
make the units even more user-friendly.
The units can be programmed and
configured with a PC running the intuitive
Windows-based programming software
package.
HMI units can be installed directly on your
machines and require nearly no additional
modules for connection to the PLC and
other factory automation components.
They provide direct access to all information and process data,with text or graphical
displays.
An IP65 rating (and higher) ensures that
the HMIs will always perform reliably, even
under the toughest conditions.
operation
앬 Broad range of applications
앬 Clear text and graphics process displays
앬 Precise, informative messages and
and process data exchange
instructions in error situations
8
7
EFGH
ABCD
5
4
POWER
9
IJKL
6
MNOP
QRST
UVWX
1
2
3
YZ!?
C1-C4
-
5
+/*=
°%#
< >()
.
_'@,
è
ç
HOME
NEXT
ALARM
ACK
PREV
ü
MITSUBISHI
Vision 1000
Mitsubishi Electric's Vision 1000 contains
different product lines for humanmachine communication, e.g. operator
terminals, IPCs, and visualization software,
and summarizes them as a concept, with
proprietary and open solutions, exactly coordinated with the respective application.
Specifications
GT1020-LBL /
GT1020-LBD /
GT1020-LBD2
GT1150-QLBD,
GT1150HS-QLBD /
GT1155-QSBD,
GT1155HS-QLBD
GT1550-QLBD /
GT1555-QSBD /
GT1555-QTBD
GT1562-VNBA,
GT1562-VNBD /
GT1565-VTBA,
GT1565-VTBD
GT1572-VNBA,
GT1572-VNBD /
GT1575-VNBA,
GT1575-VNBD
GT1575-VTBA,
GT1575-VTBD /
GT1575(V)-STBA,
GT1575-STBD
GT1585(V)-STBA,
GT1585-STBD /
GT1595-XTBA,
GT1595-XTBD
Display unit
STN, monochrome
STN, 16 grayscales/
STN, 256 colours
STN, 16 grayscales /
STN, 4096 colours /
TFT, 65536 colours
TFT, 16 colours /
TFT, 65536 colours
TFT, 16 colours /
TFT, 256 colours
TFT, 65536 colours
TFT, 65536 colours
mm 86 x 34
115 x 86
115 x 86
171 x 128
211 x 158
211 x 158
246 x 185 / 304 x 228
pixels 160 x 64
320 x 240
320 x 240
640 x 480
640 x 480
640 x 480 / 800 x 600 800 x 600 / 1024 x 768
Display format (W x H)
Resolution
Character height
User definable
Applicable PLC
All MELSEC PLC systems
Applicable third party manufactures
All major PLC manufacturers
Printer interface
—
—
USB (optional)
USB (optional)
USB (optional)
USB (optional)
USB (optional)
Real-time clock
—
Integrated
Integrated
Integrated
Integrated
Integrated
Integrated
Keyboard
Touch-panel
Touch-panel
Touch-panel
Touch-panel
Touch-panel
Touch-panel
Touch-panel
Function keys
Touchkeys
Touchkeys
Touchkeys
Touchkeys
Touchkeys
Touchkeys
Touchkeys
LED indicators
—
1 (POWER)
1 (POWER)
1 (POWER)
1 (POWER)
1 (POWER)
1 (POWER)
0.7
1.1
1.9
2.3
2.3 / 2.4
2.8 / 4.9
Weight
kg 0.2
4
HMI-Catalogue 2007 UK01-24.prn
HMI-Catalogue 2007 UK
Dienstag, 29. Mai 2007 19:15:30
MITSUBISHI ELECTRIC
4
Farbprofil: Deaktiviert
Komposit Standardbildschirm
INTRODUCTION AND CONFIGURATION ///
PLC, HMI and different Networks in Cooperation
7
ABCD
4
MNOP
1
YZ!?
9
8
EFGH
5
PREV
UVWX
3
2
°%#
ç
IJKL
6
5
QRST
C1-C4
+/*=
Network support, communication
between devices and data exchange are
all standard features in today’s factory
automation systems. The HMI control units
and process visualisation software provide
full support for the commonest standard
networks.
The control units are normally connected
to the RS422 or RS232 port, of the factory
automation components which provides a
1:1 link. In MELSECNET the control units
can be configured as slaves. If you require a
standard open network you can choose
between PROFIBUS/DP,CC-Link and
Ethernet TCP/IP.
Data communications over longer distances via modem are also possible – this
means you can monitor and edit your configuration, programs and data from the
comfort of your desk.
ETHERNET
< >()
.
_'@,
è
HOME
NEXT
ALARM
ACK
ü
MELSECNET
MITSUBISHI
P R O F
I
PROCESS FIELD BUS
B U S
7
ABCD
4
MNOP
1
YZ!?
+/*=
ç
PREV
8
EFGH
5
QRST
2
C1-C4
5
9
IJKL
6
UVWX
3
< >()
.
°%#
_'@,
HOME
NEXT
ALARM
ACK
è
ü
Supported Networks
앬 Modem Links
Enables connections over larger
distances.
앬 Ethernet
For connection of multiple control units
to the PLC system in installations
extending over larger areas.
앬 MELSECNET/10/H
Enables high-speed access (up to
25 Mbaud) to the PLC from multiple
locations via the GT15.
앬 Multi Driver support
The control units can be used e.g. as
a gateway between 2 systems (E1000)
and a gateway between 4 systems
(GT15).
Interfaces
앬 PROFIBUS/DP
E series control units can be connected
as slaves in systems using the open field
bus protocol.
앬 Multidrop-Net
Enables programming and data logging
from a central location using a PC; the
individual stations operate autonomously and independently of one another.
앬 No-Protocoll-Link
Enables connection of barcode readers
and other serial devices to the PLC via
the E series control units.
앬 A-BUS/Q-BUS
Direct connection of the GT15
to the PLC’s expansion port for fast
communications.
앬
앬
앬
앬
앬
앬
앬
앬
앬
앬
RS422
RS232C
RS485/RS422*
MELSEC A-BUS*
MELSEC Q-BUS*
PROFIBUS/DP*
Modbus TCP*
Ethernet TP (coaxial or twisted pair)*
CC-Link*
USB*
*Standard or optional dependent on the operator
terminal type
E1032
E1060
E1041 /
E1043
E1061 /
E1063
E1070,
E1070 Pro+
E1071,
E1071 Pro+
E1100,
E1100 Pro+
E1101,
E1101 Pro+ /
E1151,
E1151 Pro+
LCD monochrome
STN colour
TFT colour/
TFT grayscale
STN colour/
STN grayscale
TFT colour
TFT colour
TFT colour
TFT colour
135 x 36
120 x 91
75 x 54
145 x 110
134 x 100
134 x 100
211 x 158
211 x 158 / 304 x 228
240 x 64
320 x 240
320 x 240
320 x 240
640 x 480
640 x 480
800 x 600
800 x 600 / 1024 x 768
User definable
All MELSEC PLC systems
All major PLC manufacturers
RS232C, USB, LAN
RS232C, USB, LAN
RS232C, USB, LAN
RS232C, USB, LAN
RS232C, USB, LAN
RS232C, USB, LAN
RS232C, USB, LAN
RS232C, USB, LAN
Integrated
Integrated
Integrated
Integrated
Integrated
Integrated
Integrated
Integrated
Membrane
Membrane
Touch-panel
Touch-panel
Membrane
Touch-panel
Membrane
Touch-panel
8
16
Touchkeys
Touchkeys
16
Touchkeys
20
Touchkeys
16
16
1 (POWER)
1 (POWER)
16
1 (POWER)
20
1 (POWER)
0.9
1.1
0.56
0.87
1.3
1.1
2.3
2.0 / 3.7
5
MITSUBISHI ELECTRIC
HMI-Catalogue 2007 UK01-24.prn
HMI-Catalogue 2007 UK
Dienstag, 29. Mai 2007 19:15:49
5
INTRODUCTION AND CONFIGURATION
HMI and networks
Farbprofil: Deaktiviert
Komposit Standardbildschirm
/// OPERATOR TERMINALS GOT
GOT1000
OPERATOR TERMINALS GOT
Complex processes displayed simply
The graphic operator terminals of the
GOT1000 series represent the top products by MITSUBISHI ELECTRIC.They provide a high-resolution fully graphical display and a touch-sensitive user surface.
The depth of only 50 mm makes it to one
of the slimmest operator panel on the
market. State changes and user inputs
can be entered easily.
The 64-bit RISC processor used in the
GOT1000 series is combined with a specially developed high-speed graphics processor. Together, they deliver impressive
response and display drawing times.
With the GOT1000 the user accesses all
MELSEC PLCs special function modules in
order to test individual parts of the plant.
The PLC programs can be monitored
graphically (ladder diagram).
The control units are programmed with
the GT Works software package running
on a PC under MS Windows®.
Programs can be stored either in the control unit’s integrated, battery-powered
RAM, in plug-in EPROM modules or on
Compact flash memory cards.
A vast number of indicating instruments
like indicators, pressure gauges, analog
and digital measuring devices, etc. can be
replaced by corresponding graphical
objects.
Lots of ready-to-use practical objects are
included in the MS Windows® compatible
programming software and reduce program development time.
All units feature an integrated real-time
clock, password access control and alarm
and recipe handling.
The GOT1000 features Unicode 2.1 support. This enables users to easily create
multi-language displays.
Operator Terminals GT11
Multi-talent for Stand-alone
Applications
The graphical control units of the GT11
series combines particularly easy operation with maximum functionality and
modest space requirements. Portable
handy types are available too.
The 5.7" STN touchscreen offers brilliant
screens with up to 256 colours.
The graphic display configuration on the
touch screen is variable,giving the operator
quick and easily-comprehensible access to
information on machine functions.
With Compact Flash cards it is easy to
transfer and save project data and operation system updates. The fast USB port on
the front of the units makes it possible to
transfer project data without opening the
cabinet or control console.
Mitsubishi PLC's, servo amplifiers, frequency inverters and several automation
components can be programmed and
parametrized directly via the GOT.
All GT11 units have a built-in recipe functionality.
MITSUBISHI
Operator Terminals GT15
Complex processes displayed simply
Every GT15 operator panel offers a TFT
colour touch screen with outstanding
graphic properties. Screen sizes from 5.7"
to 15" are available.
In terms of networks, the GT15 are especially powerful with options for MELSECNET/10/H, CC-Link and Ethernet as well as
the four-driver-concept (4 drivers at the
same time and the possibility of data
exchange via gateway between the drivers
as well as third party manufacturers).
All GT15 units provide all mayor interfaces,
especially named is the fast USB port on
the front side of the panel. It can be used
for all kinds of direct data exchange or project up and downloads.
The graphic display configuration on the
touch screen is variable, giving the operating staff all possibilities of modern applications.
POWER
Operator Terminals F900GOT
The F900GOT Series - A Window
through to Your MELSEC PLC
Would you like to cut your costs and
improve efficiency? You can with the
F900GOT series control units.
In addition to standard display and diagnostics functions this unit also supports
fully-programmable graphical images and
”touch-keys”.
Data communication with the MELSEC FX,
MELSEC AnS/QnAS,MELSEC AnU/QnA
series and MELSEC System Q is performed
via the RS422 port as standard.A printer can
be connected to the integrated RS232 port.
The control units are programmed with
the GT Works software package running
on a standard PC under MS Windows®.
Programs can be stored either in the control unit’s integrated, battery-powered
RAM or in plug-in EPROM modules.
6
HMI-Catalogue 2007 UK01-24.prn
HMI-Catalogue 2007 UK
Dienstag, 29. Mai 2007 19:16:05
POWER
MITSUBISHI ELECTRIC
6
Farbprofil: Deaktiviert
Komposit Standardbildschirm
OPERATOR TERMINALS GOT ///
Provided Connections for GOT1000
GOT1000
(Operator terminals GT11 and GT15)
USB GT09-C20-USB-5P via frontside USB
MITSUBISHI
GT01-C30R2-GP
POWER
MODE
RUN
ERR.
USER
BAT.
BOOT
L
4
0
1
2
3
4
5
6
7
8
9
6
7
8
9
A
B
PULL
PULL
C
D
USB
USB
2
E
4
5
6
L
L
7
8
L
L
9
A
L
L
B
C
L
L
D
E
L
L
F
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
V+
C
VH
2
I+
SLD
V+
C
VH
3
I+
SLD
V+
C VH
4
I+
MODE
GT01-C30R4-25P
A.G.
NC
(FG)
COM
RS-232
RS-232
A/D
0~±10V
0~20mA
12VDC
24VDC
0.5A
24VDC
4mA
GT01-C30R2-9S
MNG
D.LINK
RD
L ERR.
X1
SLD
F
COM
PULL
RUN
T.PASS
SD
ERR.
STATION NO.
X10
I+
SLD
3
L
L
RUN
C
VH
1
1
L
L
ERROR
V+
L
2
3
5
BASE UNIT
MODEL Q38B
SERIAL 0205020E
01234567
89ABCDEF
FUSE
01234567
89ABCDEF
1
QJ71BR11
Q64AD
QY80
QX80
Q06HCPU
MODE
RUN
ERR.
USER
BAT.
BOOT
Q61P-A2
OPERATOR TERMINALS GOT
Q06HCPU
MELSEC
QJ71BR11
MITSUBISHI
MELSEC System Q
GT01-C30R4-8P
100-240
VAC
L
N
X15
X7 X11 X13
X5
X3
X1
X14
S/S
X6 X10 X12
X4
X2
X0
0 1 2 3
4 5 6 7
8 9 10 11
12 13 14 15
MITSUBISHI
IN
POWER
RUN
ERROR
Personal Computer
FX1N-24MR
OUT
0 1 2 3
4 5 6 7
10 11
Y6 Y10
Y5
Y3
Y2
Y1
Y11
Y0
0V
COM4 Y7
COM2 COM3 Y4
24+ COM0 COM1
MELSEC AnS/QnAS series
24MR
-ES/UL
MELSEC FX family
Provided Connections for F900GOT units
F940GOT
POWER
FX-232-CAB1
FX-50DU-CAB0/EN
QC30R2
FX-40DU-CAB/EN
Q06HCPU
POWER
MELSEC
MODE
RUN
ERR.
USER
BAT.
BOOT
L
4
6
7
8
9
A
B
PULL
PULL
C
D
USB
USB
E
F
0
1
2
3
4
5
6
7
8
9
2
4
5
6
7
8
L
L
9
A
L
L
B
C
L
L
D
E
L
L
F
COM
PULL
RUN
T.PASS
SD
ERR.
MNG
D.LINK
RD
L ERR.
100-240
VAC
STATION NO.
X10
0
1
2
3
4
5
6
7
8
9
L
N
I+
SLD
3
L
L
RUN
C
VH
1
1
L
L
ERROR
V+
L
L
L
2
3
5
BASE UNIT
MODEL Q38B
SERIAL 0205020E
01234567
89ABCDEF
FUSE
01234567
89ABCDEF
1
QJ71BR11
Q64AD
QY80
QX80
Q06HCPU
MODE
RUN
ERR.
USER
BAT.
BOOT
Q61P-A2
I+
SLD
V+
C
VH
3
I+
SLD
V+
C VH
4
I+
0
1
2
3
4
5
6
7
8
9
X15
X7 X11 X13
X5
X3
X1
X14
S/S
X6 X10 X12
X4
X2
X0
0 1 2 3
4 5 6 7
8 9 10 11
12 13 14 15
MITSUBISHI
X1
V+
C
VH
2
IN
POWER
RUN
ERROR
MODE
FX1N-24MR
OUT
0 1 2 3
4 5 6 7
10 11
Y6 Y10
Y5
Y3
Y2
Y1
Y11
Y0
0V
COM4 Y7
COM2 COM3 Y4
24+ COM0 COM1
24MR
-ES/UL
SLD
A.G.
NC
(FG)
COM
RS-232
RS-232
24VDC
4mA
12VDC
24VDC
0.5A
A/D
0~±10V
0~20mA
QJ71BR11
MITSUBISHI
MELSEC System Q
MELSEC AnS/QnAS series
MELSEC FX
General Operating Conditions
Operating Conditions
Ambient temperature in display
operation
main body unit
Storage temperature
Ambient relative humidity
GT10
GT11
0 – +50 °C
0 – +55 °C (0 – +50 °C for vertical installation)
-20 – +60 °C
10 – 90 % (non-condensing)
GT15
Noise durability
1000 Vpp tested by noise generator; 1 µs at 30 – 100 Hz
Dielectric withstand voltage
Shock resistance
1500 V AC, > 1 min / 500 V DC, > 1 min
15 G (3 times each in 3 directions)
Vibration resistance
1 G: resistant to vibrations from 9 – 150 Hz for 80 min. along all 3 axes
Altitude
Applicable installation position
Over-voltage category
Pollution degree
EMC
Max. 2000 m above NN
Cabinet or command panel
Max. II
Max. 2
89 / 336 / EEC und 93 / 68 / EEC
Environment
Avoid environments containing aggressive gases
0 – +55 °C
Avoid environments containing
aggressive gases
7
MITSUBISHI ELECTRIC
HMI-Catalogue 2007 UK01-24.prn
HMI-Catalogue 2007 UK
Dienstag, 29. Mai 2007 19:16:34
F900GOT
0 – +50 °C
0 – +50 °C
-20 – +70 °C
35 – 85 %
1000 Vpp tested by noise generator;
1 µs at 30 – 100 Hz
1500 V AV, > 1 min.
10 G (3 times each in 3 directions)
1 G: resistant to vibrations from
10 – 55 Hz for 2 hours along all 3 axes
Max. 2000 m above NN
Cabinet or command panel
7
Farbprofil: Deaktiviert
Komposit Standardbildschirm
/// OPERATOR TERMINALS GOT
왎 GOT Series Operator Terminals
F920GOT-BBD
OPERATOR TERMINALS GOT
F1
F2
F3
F930GOT-BBD
F4
F5
7
8
9
5
6
7
8
9
4
5
6
1
2
3
0
-
.
1
2
3
0
+/-
.
DEV
ESC
ENT
The F920GOT-BBD is a fully
graphical 2-colour operation
terminal. The combination of a
numerical keypad plus definable function keys offers a high
degree of functionality. The
128kB of flash memory ensures
that all data is secured and
saved in the case of power
failure.
Specifications
Display unit
SET
ESC
DEV
ENT
POWER
The F930GOT-BBD is a graphical 2-colour operation terminal. The combination of a
numerical keypad plus definable function keys offers a high
degree of functionality.
The 256 kB of flash memory
ensures that all data is secured
and saved in the case of power
failure. The F930GOT-BBD is
equipped with an integrated
touch display, for those who
wish to combine the use of
both a keyboard terminal with
a touch-screen .
This entry-level F930GOTBWD-E touch screen offers a
simple monochrome graphical
display in a compact housing.
The combination of touch
screen and IP65 design makes
the unit easy to keep clean in
environments that need a high
level of hygiene or cleanliness.
User screens can be created
using a wide variety of graphical elements and stored in the
onboard, 256 kB memory.
Other special functions
include alarm processing,
recipe handling and data
sampling.
117 x 42
User definable
User definable
240 x 80
24 V DC
256 kB
—
Touch-panel
Touch keys
(max. 50 keys/screen)
—
—
RS232C, RS422
1
Integrated
Serial
4
IP65
146 x 75 x 49
0.3
155.5 x 87.8
User definable
User definable
480 x 234
24 V DC
1 MB
—
Touch-panel
Touch keys
(max. 50 keys/screen)
—
1 (Power ON)
2 x RS232C, 1 x RS422
—
Integrated
Serial
4
IP65
215 x 133 x 70.6
0.8
128789
113862 / 113841
136797
F930GOT-BBD
F930GOT-BWD-E
type
STN, 2-colours, backlit
LCD, 2-colours, backlit
STN, monochrome
dimensions (mm)
text (lines x characters)
character height (mm)
graphical resolution (pixels)
60 x 30
User definable
User definable
128 x 64
5 V DC
128 kB
—
Membrane
6 (user assignable) +numerical keyboard with 12 keys
—
—
RS232C, RS422
1
Integrated
Serial
4
IP65
106 x 134 x 35.5
0.3
117 x 42
User definable
User definable
240 x 80
24 V DC
256 kB
—
Membrane/Touch-panel
6 (user assignable) + numerical keyboard with 12 keys
—
8 (green)
RS232C, RS422
1
Integrated
Serial
4
IP65
168 x 183 x 37.5
0.6
146721
internal
external
LED indicators
Interfaces
serial
Interface slot for optional cards
Real-time clock
Network communica- type
tion possibilities
max. no. of nodes
IP Rating (front panel)
Dimensions WxHxD (mm)
Weight (kg)
Order information
Accessories
Art. no. 146508
F940WGOT-TWD-E
TFT, 256 colours, backlit
Programming software (refer to page 42), cables and interface adapters (refer to page 20)
8
HMI-Catalogue 2007 UK01-24.prn
HMI-Catalogue 2007 UK
Dienstag, 29. Mai 2007 19:16:47
Building on the F930 specifications,the F940GOT- WD-E features a doubling of screen size
and resolution making the display crisp and easy to view. The
F940GOT-SWD-E provides the
additional benefit of a colour
screen. The F940WGOT-TWD-E
unit offers a bright,clear 256 colour TFT display which can be
used in both a split screen configuration and in landscape or portrait mounting positions.The unit
also boasts a further doubling of
memory,over the standard F940,
to 1MB.
F940GOT-LWD-E /
F940GOT-SWD-E
LCD, monochrome /
LCD, 8-colours
115 x 86 (5.7")
User definable
User definable
320 x 240
24 V DC
512 kB
—
Touch-panel
Touch keys
(max. 50 keys/screen)
—
1 (Power ON)
RS232C, RS422
1
Integrated
Serial
4
IP65
162 x 130 x 57
1.0
F920GOT-BBD
Power supply
Internal memory capacity
Memory card slot
Keyboard type
Function keys
F940GOT-LWD-E/-SWD-E,
F940WGOT-TWD-E
F6
4
SET
F930GOT-BWD-E
MITSUBISHI ELECTRIC
8
Farbprofil: Deaktiviert
Komposit Standardbildschirm
OPERATOR TERMINALS GOT ///
GT1020
GT1150-QLBD,
GT1155-QSBD
GT1150HS-QLBD,
GT1155HS-QSBD
GT1550-QLBD/GT1555-QSBD/
GT1555-QTBD
MITSUBISHI
MITSUBISHI
MITSUBISHI
The new GT1020 series has a
bright 3.7-inch STN blackand-white liquid crystal
display with 3-color backlight
for use in a variety of display
applications.
Recipe management, alarming
and messaging are included as
standard.The unit has a built-in
memory for up to 4000 16-bit
data words which can be used
to store or exchange data with
a connected PLC.
The GT1020-LBD/-LBL have a
RS422 and a RS232 terminal
and the GT1020-LBD2 has a
RS232 terminal only.
The GT1150HS-QLBD and
GT1155HS-QSBD are handsome portable terminals and
boast top level quality for
medium sized terminals. They
share the same functions as all
GT11 series terminals.
Mitsubishi Electric Controllers,
inverters and servo amplifiers
can be easily programmed via
the USB transparent functionality.
All GT11 terminals feature recipes, alarms, multi-language
and Unicode support.
Furthermore they offer various
graphical object libraries.
GT1550-QLBD,GT1555-QSBD
and GT1555-QTBD have an
exceptionally clear display of
16 shades monochrome over
4096 colour to 65536 full-colour display.
Windows fonts for clear text
presentation as well as CF card
interface for project operation
systems and data are available.
The panels can be mounted
and used horizontal or vertical.
GT1020-LBL /-LBD /-LBD2
GT1150-QLBD /
GT1150HS-QLBD
GT1155-QSBD /
GT1155HS-QSBD
type
STN, monochrome
STN, 16 grayscales
STN, 256 colours
dimensions (mm)
text (lines x characters)
character height (mm)
graphical resolution (pixels)
86.4 x 34.5 (3.7")
User definable
User definable, Windows fonts
160 x 64
5 V DC / 24 V DC / 24 V DC
512 kB
—
Touch-panel
Touch keys
—
—
RS232, RS422 / RS232
—
—
—
—
Serial
2
IP67
113 x 74
0.2
115 x 86 (5.7")
User definable
User definable, Windows fonts
320 x 240
24 V DC
3 MB
1 (CF card)
Touch-panel
Touch keys
—
1 (Power ON)
RS232C,RS422(1ch)/RS232C,RS422(2ch)
—
USB (front) / USB (top)
1, for recipes and list editors
Integrated
Serial
2
IP67F
164 x 135 x 56 / 176 x 220 x 93
0,7 / 1.0
115 x 86 (5.7")
User definable
User definable, Windows fonts
320 x 240
24 V DC
3 MB
1 (CF card)
Touch-panel
Touch keys
—
1 (Power ON)
RS232C,RS422(1ch)/RS232C,RS422(2ch)
—
USB (front) / USB (top)
1, for recipes and list editors
Integrated
Serial
2
IP67F
164 x 135 x 56 / 176 x 220 x 93
0,7 / 1.0
162709 / 170180
162710 / 170181
Specifications
Display unit
The GT11 panels GT1150-QLBD
andGT1150HS-QLBD(16colours)
as well as the GT1155-QSBD
and GT1155HS-QSBD (256
colours) are the standard models of the GOT1000 series and
offer a full array of basic functions for stand-alone use.
Beside their outstanding
speed and performance they
offer a modern design and a
first on the market front USB
port for project download and
PLC maintenance.
Power supply
Internal memory capacity
Memory card slot
Keyboard type
internal
Function keys
external
LED indicators
serial
Interfaces
parallel
others
Interface slot for optional cards
Real-time clock
Network communica- type
tion possibilities
max. no. of nodes
IP Rating (front panel)
Dimensions WxHxD (mm)
Weight (kg)
Order information
Art. no. 200738 / 200491 / 200492
Accessories
9 MB
1 (CF card)
Touch-panel
Touch keys (300 per screen)
—
1 (Power ON)
RS232
—
USB (at front panel)
2
Integrated
Ethernet (TCP/IP), CC-Link, RS422,
A-Bus, Q-Bus, MELSECNET/10
IP67F
167 x 135 x 60
1.1
203472 / 203471 / 203470
Programming software (refer to page 42), cables and interface adapters (refer to page 20)
9
MITSUBISHI ELECTRIC
HMI-Catalogue 2007 UK01-24.prn
HMI-Catalogue 2007 UK
Dienstag, 29. Mai 2007 19:16:57
GT1550-QLBD / GT1555-QSBD /
GT1555-QTBD
STN monochrome / STN 4096 colours /
TFT, 65536 colours
115 x 86 (5.7")
User definable
User definable, Windows fonts
320 x 240
9
OPERATOR TERMINALS GOT
POWER
Farbprofil: Deaktiviert
Komposit Standardbildschirm
/// OPERATOR TERMINALS GOT
GT1562-VNBA/VNBD,
GT1565-VTBA/VTBD
GT1572-VNBA/VNBD,
GT1575-VNBA/VNBD
GT1575-VTBA/VTBD,
GT1575-STBA/STBD,
GT1575V-STBD
GT1585-STBA/STBD,
GT1595-XTBA/XTBD,
GT1585V-STBD
POWER
POWER
OPERATOR TERMINALS GOT
POWER
The proprietary operating system as well as the completely
new developed hardware
result in an outstanding performance and quality of the
GT15 operator terminals. The
user can choose between several fast project up- and download options; high-speed serial
connection with 115 kBaud,
USB or project transfer via
CF-card is available.
Specifications
Display unit
Power supply
type
dimensions (mm)
text (lines x characters)
character height (mm)
graphical resolution (pixels)
A types
D types
Internal memory capacity
Memory card slot
Keyboard type
Function keys
internal
external
LED indicators
serial
parallel
others
Interface slot for optional cards
Real-time clock
Network communica- type
tion possibilities
IP Rating (front panel)
Dimensions WxHxD (mm)
Weight (kg)
Interfaces
Order information
Accessories
POWER
In addition, the GT15 offer
Ethernet project transfer via
the Ethernet interface
GT15-J71E71-100.
MELSEC PLCs can easily be programmed using the front USB
port with integrated Transparent Mode, so updates on PLCs,
servo amplifiers, inverters and
GOT terminals can be accomplished without opening the
cabinet.
The file system of the CF card is
PC compatible. Projects and
operating system components
can be downloaded to the CF
card. The GT15 can load the
files from the CF card. This is a
cruical advantage for manufacturers of serial machines.
In terms of networks, the GT15
are especially powerful with
options for MELSECNET/10/H,
CC-Link and Ethernet as well as
the four-driver-concept (4 drivers at the same time and the
possibility of data exchange
via gateway between the
TFT, 16 colours / 256 colours
211 x 158 (10.4")
User definable
User definable, Windows fonts
640 x 480
100 – 240 V AC
24 V DC
GT1585-STBA / GT1595-XTBA
GT1585-STBD /GT1595-XTBD,
GT1585V-STBD
TFT, 256 colours (expandable)
246 x 185 (12.1") / 304 x 228 (15")
User definable
User definable, Windows fonts
800 x 600 / 1024 x 768
100 – 240 V AC
24 V DC
5 MB (expandable up to 53 MB)
9 MB (expandable up to 57 MB)
9 MB (expandable up to 57 MB)
1 (compact flash 256 MB max.)
Touch-panel
Touch keys
—
1
RS232C
—
USB (on panel front)
1
Integrated
Ethernet (TCP/IP), CC-Link, RS422,
A-Bus, Q-Bus, MELSECNET/10
IP67
303 x 214 x 56
2.3
1 (compact flash 256 MB max.)
Touch-panel
Touch keys
—
1
RS232C
—
USB (on panel front)
2
Integrated
Ethernet (TCP/IP), CC-Link, RS422,
A-Bus, Q-Bus, MELSECNET/10
IP67
303 x 214 x 56
2.3 / 2.4
1 (compact flash 256 MB max.)
Touch-panel
Touch keys
—
1
RS232C
—
USB (on panel front)
2
Integrated
Ethernet (TCP/IP), CC-Link, RS422,
A-Bus, Q-Bus, MELSECNET/10
IP67
316 x 242 x 56 / 397 x 296 x 61
2.8 / 4.9
166241 / 166242
169482 / 169483
162706 / 162707 / 169484 / 169485, 162708 / 169464 / 169486 / 203469,
video model 203496
video model 203495
GT1572-VNBA / GT1575-VNBA
GT1572-VNBD / GT1575-VNBD
TFT, 16 colours / 65536 colours
171 x 128 (8.4")
User definable
User definable, Windows fonts
640 x 480
100 – 240 V AC
24 V DC
VNtypes:5MB(expandableupto53MB)
VTtypes:9MB(expandableupto57MB)
1 (compact flash 256 MB max.)
Touch-panel
Touch keys
—
1
RS232C
—
USB (on panel front)
1/2
Integrated
Ethernet (TCP/IP), CC-Link, RS422,
A-Bus, Q-Bus, MELSECNET/10
IP67
241 x 150 x 56
1.9
Options cards (refer to page 19), programming software (refer to page 42), cables and interface adapters (refer to page 20)
10
HMI-Catalogue 2007 UK01-24.prn
HMI-Catalogue 2007 UK
Dienstag, 29. Mai 2007 19:17:08
*Not for the video models
GT1575-VTBA / GT1575-STBA
GT1575-VTBD / GT1575-STBD,
GT1575V-STBD
TFT, 65536 colours (expandable)
211 x 158 (10.4")
User definable
User definable, Windows fonts
640 x 480 / 800 x 600
100 – 240 V AC
24 V DC
GT1562-VNBA / GT1565-VTBA
GT1562-VNBD / GT1565-VTBD
/ 162705
Art. no. 166240
169480 / 169481
drivers as well as third party
manufacturers).
The new Video models
GT1585V-STBD and
GT1575V-STBD additionally
dispose of a video/RGB input
to monitor images from PC's,
cameras and vision sensors on
the GOT.
All GT15 operator terminals
listed on this page are available as AC type (-A models*)
or as DC type (-D models).
MITSUBISHI ELECTRIC
10
Farbprofil: Deaktiviert
Komposit Standardbildschirm
F940GOT-SBD-RH-E,
F943GOT-SBD-RH-E
F940GOT-LBD-RH-E,
F943GOT-LBD-RH-E
F940GOT-SBD-H-E,
F943GOT-SBD-H-E
F940GOT-LBD-H-E,
F943GOT-LBD-H-E
The handy graphic operator
terminals F940GOT-/F943GOT
type RH provide a high-resolution fully graphical display
with a touch-sensitive user surface and user-programmable
function keys. The terminal
also features an Emergency
Stop switch, a key switch and
a Dead-man switch, which
can be integrated in the application.
These safety functions are the
special advantages to the standard type H handy operator
teminals F940GOT/F943GOT.
A colour display type (F940GOT/
F943GOT-SBD-RH-E) or a
monochrome display type
(F940GOT/F943GOTLBD-RH-E) is available.
The Handy operator terminals
of the F940GOT type RH series
provide an RS422 and an
RS232C interface each and the
F943GOT type RH series provide twoRS232C interfaces
each for communication.
The handy graphic operator
terminals F940GOT-/F943GOT
type H provide a high-resolution fully graphical display
with a touch-sensitive user surface and user-programmable
function keys. The terminal
also features an Emergency
Stop switch.
A colour display type (F940GOT/
F943GOT-SBD-H-E) or a
monochrome display type
(F940GOT/F943GOTLBD-H-E) is available.
The Handy operator terminals
of the F940GOT type H series
provide an RS422 and an
RS232C interface each and the
F943GOT type H series provide twoRS232C interfaces
each for communication.
F940GOT-SBD-RH-E /
F940GOT-LBD-RH-E /
F943GOT-SBD-RH-E
F943GOT-LBD-RH-E
type
LCD, 8 colours, backlit
LCD, monochrome, backlit
dimensions (mm)
115 x 86 (6.5")
115 x 86 (6.5")
Display unit
text (lines x characters)
User definable
User definable
character height (mm)
User definable
User definable
graphical resolution (pixels) 320 x 240
320 x 240
Power supply
24 V DC (+10 / -15 %)
24 V DC (+10 / -15 %)
Internal memory capacity
512 kB
512 kB
Memory card slot
—
—
Keyboard type
Touch-panel
Touch-panel
1
emergency
stop
switch,
4
function
1
emergency stop switch, 4 function
Integrated function keys
keys, touch keys (max. 50 keys/screen) keys, touch keys (max. 50 keys/screen)
Emergency stop switch with 2 con- Emergency stop switch with 2 conSafety functions
tacts, Dead-man switch with 3 posi- tacts, Dead-man switch with 3 positions and 2 contacts
tions and 2 contacts
LED indicators
4+1(EMERGENCYSTOP)+1(PowerON) 4+1(EMERGENCYSTOP)+1(PowerON)
serial
RS232C, RS422 / 2 x RS232C
RS232C, RS422 / 2 x RS232C
Interfaces
parallel
—
—
others
—
—
Interface slot for optional cards
—
—
Real-time clock
Integrated
Integrated
IP Rating
IP54
IP54
Dimensions WxHxD (mm)
156 x 191 x 69.5
156 x 191 x 69.5
Weight (kg)
0.87
0.87
Specifications
Order information
F940GOT-LBD-H-E /
F943GOT-LBD-H-E
LCD, monochrome, backlit
115 x 86 (6.5")
User definable
User definable
320 x 240
24 V DC (+10 / -15 %)
512 kB
—
Touch-panel
1 emergency stop switch, 4 function
keys, touch keys (max. 50 keys/screen)
Emergency stop switch
with 2 contacts
Emergency stop switch
with 2 contacts
4+1(EMERGENCYSTOP)+1(PowerON)
RS232C, RS422 / 2 x RS232C
—
—
—
Integrated
IP54
156 x 191 x 63.5
0.79
4+1(EMERGENCYSTOP)+1(PowerON)
RS232C, RS422 / 2 x RS232C
—
—
—
Integrated
IP54
156 x 191 x 63.5
0.79
Art. no. 143390 / 143413
Accessories
Programming software (refer to page 42), cables and interface adapters (refer to page 22)
11
MITSUBISHI ELECTRIC
HMI-Catalogue 2007 UK01-24.prn
HMI-Catalogue 2007 UK
Dienstag, 29. Mai 2007 19:17:18
F940GOT-SBD-H-E /
F943GOT-SBD-H-E
LCD, 8 colours, backlit
115 x 86 (6.5")
User definable
User definable
320 x 240
24 V DC (+10 / -15 %)
512 kB
—
Touch-panel
1 emergency stop switch, 4 function
keys, touch keys (max. 50 keys/screen)
11
OPERATOR TERMINALS GOT
OPERATOR TERMINALS GOT ///
Farbprofil: Deaktiviert
Komposit Standardbildschirm
/// OPERATOR TERMINALS E SERIES
Operator Terminals E1000 and MAC E Series
The E Series - State-of-the-Art Operation and Process Design!
OPERATOR TERMINALS E SERIES
The E series operator terminals provide a
unique concept of flexible display blocks.
The dialog screen is displayed quickly and
can be adopted to suit the users needs.
These operator terminals in many cases
are capable of replacing a complete control console.
The features include user-definable text,
control parameter and data editing, alarm
handling, recipes and menu operation.
Programming is performed with an
MS-Windows® compatible PC running the
E-Designer software package.
They permit simple alteration of process
data and thus influence the particular
application.
The units in the E series are perfectly
matched to the range of MELSEC controllers and yet easy to operate.
“Dialog blocks”consisting of text and/or
graphics form the basis of all E applications. Via the object-orientated programming system, each dialog block displays all
signals and values allocated to the object
in digital and analog form.
The individual dialog blocks that make
up a E application form a hierarchical tree
structure with the needed function
assigned to each dialog block. Thus, they
are adopted to the machine and process
functions. The result is a clear operator
guidance with a clear information flow
and clear text messages in case of an error.
Q06HCPU
MELSEC
POWER
MODE
RUN
ERR.
USER
BAT.
BOOT
L
4
L
L
6
7
8
9
A
B
PULL
PULL
C
D
USB
USB
E
F
0
1
2
3
4
5
6
7
8
9
L
L
2
4
5
6
7
8
9
A
L
B
C
L
L
D
E
L
L
F
COM
PULL
MNG
D.LINK
RD
L ERR.
I+
SLD
3
L
L
RUN
T.PASS
SD
ERR.
STATION NO.
X10
C
VH
1
1
L
L
RUN
ERROR
V+
L
L
2
3
5
BASE UNIT
MODEL Q38B
SERIAL 0205020E
01234567
89ABCDEF
FUSE
01234567
89ABCDEF
1
QJ71BR11
Q64AD
QY80
QX80
Q06HCPU
MODE
RUN
ERR.
USER
BAT.
BOOT
Q61P-A2
0
1
2
3
4
5
6
7
8
9
X1
V+
C
VH
2
I+
SLD
V+
C
VH
3
I+
SLD
V+
C VH
4
I+
0
1
2
3
4
5
6
7
8
9
MODE
SLD
A.G.
NC
(FG)
COM
RS-232
RS-232
24VDC
4mA
12VDC
24VDC
0.5A
A/D
0~±10V
0~20mA
QJ71BR11
MITSUBISHI
7
ABCD
4
MNOP
1
YZ!?
8
EFGH
5
QRST
2
C1-C4
9
IJKL
6
UVWX
3
< >()
.
-
5
+/*=
°%#
_'@,
HOME
NEXT
ALARM
ACK
ç
PREV
è
ü
7
ABCD
4
MNOP
1
YZ!?
5
QRST
6
2
-
5
°%#
PREV
IJKL
UVWX
C1-C4
+/*=
ç
9
8
EFGH
3
< >()
.
_'@,
è
HOME
NEXT
ALARM
ACK
ü
7
ABCD
4
MNOP
1
8
EFGH
5
QRST
2
YZ!?
C1-C4
-
5
+/*=
°%#
9
IJKL
6
UVWX
ç
PREV
è
HOME
NEXT
ALARM
ACK
ü
3
< >()
.
_'@,
12
HMI-Catalogue 2007 UK01-24.prn
HMI-Catalogue 2007 UK
Dienstag, 29. Mai 2007 19:17:37
Text and graphic blocks return static or
dynamic information to the operator.
Text blocks display numeric values and
text. The display supports scrolling, so the
size of textblocks is not limited by the
number of lines on the screen.
The blocks can be output to a printer
under PLC control.
The graphics block size is limited by the
display which has a resolution of
240 x 64 pixel up to 1024 x 768 pixel.
Static objects for example, can be displayed in different font sizes or with predefined graphic objects.
Dynamic objects are predefined as well for
easier application development and can
be scaled to any size.
In addition to these predefined objects
self-created bitmap graphics can be
imported and managed in libraries.
MITSUBISHI ELECTRIC
12
Farbprofil: Deaktiviert
Komposit Standardbildschirm
OPERATOR TERMINALS E SERIES ///
All E series control units are fitted with an
RS422 and an RS232 interface for connection to the PLC.
This second port enables the unit to be run
in transparent mode.
This means that the E series is capable of
communicating simultaneously with both
the connected PLC system and a PC (via
the MX4 HMI or GX IEC Developer software).
The E units can also be linked to the PC via
modem.
Another communications option is the
no-protocol mode for the connection of
serial peripheral devices (e.g. bar-code
readers).
Printer, mouse, keyboard or a USB memory
stick can be connected to an E1000 control
unit via the integrated USB host port.
RS232C
NO-Protocol-Mode
Ethernet
7
ABCD
4
MNOP
1
YZ!?
+/*=
ç
PREV
8
EFGH
5
QRST
2
C1-C4
5
9
IJKL
6
UVWX
3
< >()
.
°%#
_'@,
HOME
NEXT
ALARM
ACK
è
ü
Networking
Ethernet
All E1000 operator terminals feature an
integrated Ethernet adapter to realize an
Ethernet network. For the MAC series terminals is an communications interface
MAC-IFC-ETTP available.
Within this network up to 30 stations can
be connected to one PLC in a segment.
The connection to open networks can be
established through an optional interface
for PROFIBUS/DP with a transfer rate of up
to 12 Mbit.
7
ABCD
4
MNOP
1
YZ!?
+/*=
ç
PREV
8
EFGH
5
QRST
2
C1-C4
5
9
IJKL
6
UVWX
3
< >()
.
°%#
_'@,
HOME
NEXT
ALARM
ACK
è
ü
Dual Driver
7
ABCD
4
MNOP
1
YZ!?
+/*=
ç
PREV
8
EFGH
5
QRST
2
C1-C4
5
9
IJKL
6
UVWX
3
< >()
.
°%#
_'@,
HOME
NEXT
ALARM
ACK
è
ü
PROFIBUS/DP
Dual Driver
The E series operator terminal can communicate with two components of different
manufactures; also data exchange
between the two drivers is possible.
Operating Conditions
Specifications
Ambient temperature in operation
0 – +50 °C (all E series operator terminals)
Operating temperature range
Max. 90 % (non-condensing)
Storage temperature
-20 – +60 °C
Noise durability
1000 Vpp tested by noise generator; 1 µs at 30 – 100 Hz
Dielectric withstand voltage
1500 V AC, > 1 min.
Shock resistance
10 G (3 times each in 3 directions)
Vibration resistance
1 G: resistant to vibrations from 10 – 55 Hz for 2 h. along all 3 axes
Insulation resistance
> 5 MΩ (500 V DC)
Grounding
Class 3 (100 Ω)
Environment
Avoid environments containing aggressive gases, install in a dust-free location.
Cooling
Self-cooling
Certifications
UL / CSA / CE / DNV / RINA / LR
13
MITSUBISHI ELECTRIC
HMI-Catalogue 2007 UK01-24.prn
HMI-Catalogue 2007 UK
Dienstag, 29. Mai 2007 19:18:09
13
OPERATOR TERMINALS E SERIES
Communications
Farbprofil: Deaktiviert
Komposit Standardbildschirm
/// OPERATOR TERMINALS E SERIES
왎 E Series Operator Panels
E50
E100
E150
E200
150
-.
0
F1
F2
F3
F1
1
F2
2
F3
3
F4
4
5
F4
PREV
NUM
6
7
8
9
OPERATOR TERMINALS E SERIES
0
The E50 is a key-oriented HMI
unit with four function keys
and an LCD display with two
rows and 16 characters each. It
can display up to 50 text
blocks, which can be paged
with the function keys. Values
can be edited directly with the
unit’s keyboard. The RS232C
and RS422 ports are both integrated in a 25-pin connector.
Specifications
Display unit
E100
LCD, mono, backlit
73.5 x 11.5
2 lines x 20 characters
5 (user definable)
—
5 V DC (± 5 %)
64 kB
—
Membrane
internal
4
4
external
—
—
RS232C, RS422 (via adapter)
—
—
LED indicators
serial
parallel
others
Interface slot for optional cards
Real-time clock
Networkcommunica- type
tionpossibilities
max. no. devices
(optional)
Interfaces
IP Rating (front panel)
Dimensions WxHxD (mm)
Weight (kg)
Order information
Accessories
5
6
1
2
3
The E200 terminal offers 5 programmable function keys with
freely definable labels and
alternating function assignment. LEDs indicate the process status. Recipes, passwords,
texts, alarms and changes can
be entered via input keys. The
E200 offers an LCD display with
four rows and 20 characters
each. It posseses one RS232C
port and a RS422 port, which
can be connected to either
two PLCs or a PLC and a printer,
bar code reader and other
RS232 devices.
—
—
RS232C, RS422
—
Modbus (via optional adapter)
E150
LCD, mono, backlit
73.5 x 11.5
2 lines x 20 characters
5 (user definable)
—
5 V DC (± 5 %)
64 kB
—
Membrane
6 (user assignable)
+ numerical keyboard with 12 keys
—
—
RS232C, RS422
—
Modbus (via optional adapter)
E200
LCD
70.4 x 20.8
2 lines x 20 characters
5 (user definable)
—
24 V DC (20 – 30 V)
64 kB
—
Membrane
5 (user assignable)
+ numerical keyboard with 12 keys
—
5 (2 colours: red, green)
RS232C, RS422
—
Modbus (via optional adapter)
—
Modbus
Integrated
Modbus, serial
Integrated
Modbus, serial
Integrated
Modbus, serial
(serial = 4)
(serial = 4)
(serial = 4)
IP65
104 x 69 x 38
0.2 kg
IP65
142 x 90 x 29
0.25 kg
IP65
142 x 100 x 29
0.5 kg
IP65
147 x 163,5 x 38
0.7 kg
88413
135935
69344
Art. no. 129590
Programming software E-Designer (refer to page 44), cables and interface adapters (refer to page 21)
14
HMI-Catalogue 2007 UK01-24.prn
HMI-Catalogue 2007 UK
Dienstag, 29. Mai 2007 19:18:25
8
4
The E150 unit features 6 programmable function keys with
definable labels and numerical
keypad. Recipes, passwords
and editing changes can all be
entered and edited directly
with the units keyboard. The
unit offers an LCD display with
two rows and 20 characters
each. It has one RS232C port
and a RS422 port, which can be
connected to either two PLCs
or a PLC and a printer, bar code
reader and other RS232
devices.
E50
LCD, mono, backlit
55.7 x 100
2 lines x 16 characters
5
—
5 V DC (± 5 %)
16 kB
—
Membrane
type
dimensions (mm)
text (lines x characters)
character height (mm)
graphical resolution (pixels)
Power supply
Internal memory capacity
External memory card
Keyboard type
Function keys
The E100 has 4 programmable
function keys with freely definable labels and alternating
function assignment. Recipes,
passwords and changes can be
entered via input keys. The unit
has an LCD display with two
rows and 20 characters each. It
has one RS232C port and a
RS422 port, which can be connected to either two PLCs or a
PLC and a printer, bar code
reader and other RS232
devices.
9
7
MITSUBISHI ELECTRIC
14
Farbprofil: Deaktiviert
Komposit Standardbildschirm
OPERATOR TERMINALS E SERIES ///
E600
E610
E615
N
am
Ty e:
pe
:
The E300 has a key-oriented
user interface with programmable function keys. The
graphical screen can display
symbols, alarms, graphs and
texts in a variety of sizes. Recipes, passwords, texts, alarms,
and changes can be entered
via input keys.
Specifications
Display unit
type
dimensions (mm)
text (lines x characters)
character height (mm)
graphical resolution (pixels)
Power supply
Internal memory capacity
External memory card
Keyboard type
Function keys
internal
external
LED indicators
Interfaces
serial
parallel
others
Interface slot for optional cards
Real-time clock
Network communication possibilities
IP Rating (front panel)
Dimensions WxHxD (mm)
Weight (kg)
Order information
The E300 terminal offers also a
printer interface and an
optional communication interface for network connection
and for optional expansion
cards.
The E600 features the same
functions as the E300, but
offers additionally a bigger display and more function keys.
E300
LCD, mono, backlit
127.2 x 33.9
4 (8) lines x 20 (40) characters
User definable
—
24 V DC (20 – 30 V)
400 kB (expandable)
1 (PCMCIA card 4 or 8 MB)
Membrane
8 (user assignable)
+numerical keyboard with 12 keys
Max. 128 (optional with IFC-128/E)
16 (2 colours: red, green)
RS232C, RS422
Optional with IFC-PI
Ethernet, Profibus, Modbus
(via optional adapter)
1
Integrated
Ethernet TCP/IP, Modbus,
Profibus/DP (all optional)
Max. 4 terminals to one PC
IP65
212 x 198 x 69
1.5
Art. no. 64458
Accessories
The operator terminals E610
and E615 feature a touchscreen with a resolution of
320 × 240 pixels each. The
model E610 has a 16 grayscales
display and the E615 can show
256 colours.
Freely programmable touchkeys on the LCD display helps
the user to input recipes or
texts and to change the PLC
application.
Both operator teminals con be
mounted and used horizontal
or vertical.
The units have an RS232C,
RS422 and RS485 port each as
well as an optional slot for
communication and expansion cards.
E600
LCD, mono, backlit
120 x 64
16 lines x 40 characters
User definable
—
24 V DC (20 – 30 V)
400 kB (expandable)
1 (PCMCIA card 4 or 8 MB)
Membrane
16 (user assignable)
+numerical keyboard with 12 keys
Max. 128 (optional with IFC-128/E)
16 (2 colours: red, green)
RS232C, RS422
Optional with IFC-PI
Ethernet, Profibus, Modbus
(via optional adapter)
1
Integrated
Ethernet TCP/IP, Modbus,
Profibus/DP (all optional);
Max. 4 terminals to one PC
IP65
214 x 232 x 69
1.6
E610
LCD, 16 grayscales, backlit
115.2 x 86.4
User definable
User definable
320 x 240
24 V DC (20 – 30 V)
400 kB (expandable)
1 (PCMCIA card 4 or 8 MB)
Touch-panel
E615
LCD, 256 colours, backlit
115.2 x 86.4
User definable
User definable
320 x 240
24 V DC (20 – 30 V)
400 kB (expandable)
1 (PCMCIA card 4 or 8 MB)
Touch-panel
—
—
Max. 128 (optional with IFC-128/E)
1 (Power ON)
RS232C, RS422, RS485
Optional with IFC-PI
Ethernet, Profibus, Modbus
(via optional adapter)
1
Integrated
Ethernet TCP/IP, Modbus,
Profibus/DP (all optional);
Max. 4 terminals to one PC
IP65
200 x 150 x 70
1.7
Max. 128 (optional with IFC-128/E)
1 (Power ON)
RS232C, RS422, RS485
Optional with IFC-PI
Ethernet, Profibus, Modbus
(via optional adapter)
1
Integrated
Ethernet TCP/IP, Modbus,
Profibus/DP (all optional);
Max. 4 terminals to one PC
IP65
200 x 150 x 70
1.7
104496
135945
135946
Programming software E-Designer (refer to page 44), cables and interface adapters (refer to page 21)
15
MITSUBISHI ELECTRIC
HMI-Catalogue 2007 UK01-24.prn
HMI-Catalogue 2007 UK
Dienstag, 29. Mai 2007 19:18:37
N
am
Ty e:
pe
:
15
OPERATOR TERMINALS E SERIES
E300
Farbprofil: Deaktiviert
Komposit Standardbildschirm
/// OPERATOR TERMINALS E SERIES
왎 Graphical Operator Terminal E1000
E1032
E1060
8
EFGH
7
ABCD
4
OPERATOR TERMINALS E SERIES
1
8
EFGH
5
QRST
2
YZ!?
C1-C4
-
5
+/*=
°%#
9
IJKL
ç
PREV
6
UVWX
5
6
QRST
UVWX
2
3
YZ!?
C1-C4
< >()
NEXT
ACK
The E1041 and E1043 terminals have a 3.5" TFT touch
screen (65,536 colours or 16
grayscales). Recipes, text and
editing changes are entered
via keys.
Password levels protect the
system against unauthorised
access, while sixteen separate
alarm groups keep you
informed on all-important
developments.
The operator terminals E1061
and E1063 posess the same
features as the models E1041
and E1043, but with a 5,7" STN
display (65,536 colours or 16
grayscales) they offers a bigger
display unit.
All E1000 operator panels on
this page have two PLC ports, a
USB host port to connect
mouse, keyboard, printer and
USB memory sticks as well as
an integrated Ethernet interface. The connection to
Profibus/DP is available via a
separate extension module.
.
-
5
+/*=
°%#
_'@,
HOME
NEXT
ALARM
ACK
è
ü
è
HOME
ALARM
IJKL
4
1
ç
MNOP
E1061 / E1063
9
7
ABCD
MNOP
PREV
E1041 / E1043
ü
3
< >()
.
_'@,
6
The E1032 is a key-oriented
user-friendly interface with
programmable function keys.
The graphical screen can display symbols, alarms, historical
graphs and texts with the use
of windows fonts. Recipes,
passwords, texts, alarms and
changes can be entered via
input keys.
Specifications
Display unit
type
dimensions (mm)
text (lines x characters)
character height (mm)
graphical resolution (pixels)
Power supply
Internal memory capacity
Flash memory
Keyboard type
internal
Function keys
external
LED indicators
serial
Interfaces
parallel
others
Interface slot for optional cards
Real-time clock
Network communication possibilities
IP Rating (front panel)
Dimensions WxHxD (mm)
Weight (kg)
Order information
Accessories
The E1060 colour display with
65,536 colours and 16 screenoriented function keys provides user-friendly operation.
Recipes,text and editing
changes are entered via keys.
Password levels protect the
system against unauthorised
access, while sixteen separate
alarm groups keep you
informed on all-important
developments.
E1032
E1060
E1041 / E1043
E1061 / E1063
TFT monochrome
135 x 36
User definable
User definable, Windows fonts
240 x 64
24 V DC (20 – 30 V)
12 MB
32 MB (Intel Strata Flash)
Membrane
8
—
16 (8 integrated in keys)
RS232C, RS422, RS485
—
USB
1
Integrated
Ethernet TCP/IP, Modbus TCP,
MPI (all integrated);
Profibus/DP (optional)
IP 65
202 x 187 x 63
0.9
STN colour
120 x 91 (5.7")
User definable
User definable, Windows fonts
320 x 240
24 V DC (20 – 30 V)
12 MB
32 MB (Intel Strata Flash)
Membrane
16
—
16 (8 integrated in keys)
RS232C, RS422, RS485
—
USB
1
Integrated
Ethernet TCP/IP, Modbus TCP,
MPI (all integrated);
Profibus/DP (optional)
IP 65
275 x 168 x 63
1.1
TFT colour / TFT grayscale
75 x 54 (3.5")
User definable
User definable, Windows fonts
320 x 240
24 V DC (20 – 30 V)
12 MB
32 MB (Intel Strata Flash)
Touch-panel
Touch keys
—
1 (Power ON)
RS232C, RS422, RS485
—
USB
1
Integrated
Ethernet TCP/IP, Modbus TCP,
MPI (all integrated);
Profibus/DP (optional)
IP 65
156 x 119 x 63
0.56
STN colour / STN monochrome
145 x 110 (5.7")
User definable
User definable, Windows fonts
320 x 240
24 V DC (20 – 30 V)
12 MB
32 MB (Intel Strata Flash)
Touch-panel
Touch keys
—
1 (Power ON)
RS232C, RS422, RS485
—
USB
1
Integrated
Ethernet TCP/IP, Modbus TCP,
MPI (all integrated);
Profibus/DP (optional)
IP 65
201 x 152 x 63
0.87
169300
169298 / 169299
169301 / 169302
Art. no. 169297
Programming software E-Designer (refer to page 44), cables and interface adapters (refer to page 21), Profibus/DP module (refer to page 24)
16
HMI-Catalogue 2007 UK01-24.prn
HMI-Catalogue 2007 UK
Dienstag, 29. Mai 2007 19:18:56
MITSUBISHI ELECTRIC
16
Farbprofil: Deaktiviert
Komposit Standardbildschirm
OPERATOR TERMINALS E SERIES ///
E1070 (Pro+)
E1071 (Pro+)
E1100 (Pro+)
9
7
8
ABCD
EFGH
E1101/E1151 (Pro+),
DT1151
7
ABCD
IJKL
8
EFGH
5
4
5
6
4
MNOP
QRST
UVWX
MNOP
QRST
1
2
3
1
2
YZ!?
C1-C4
< >()
YZ!?
.
-
5
+/*=
°%#
_'@,
HOME
NEXT
ALARM
ACK
è
ç
PREV
C1-C4
9
IJKL
6
UVWX
3
< >()
.
-
5
+/*=
°%#
_'@,
HOME
NEXT
ALARM
ACK
ç
PREV
è
ü
ü
The operator terminal E1070
offers a 6.5" TFT display with
65,536 colours and a resolution of 640 x 480 pixels. 16
freely programmable function
keys facilitate the inputs
directly at the terminal.
The 6.5" TFT colour display of
the E1071 with 65,536 colours
provides a user-friendly touch
screen operation. Recipes, text
and editing changesare
entered via touch keys.
Specifications
Display unit
The operator terminal E1100
offers a 10.4" TFT display with
65,536 colours and a resolution of 800 x 600 pixels. Freely
programmable function keys
facilitate the inputs directly at
the terminal.
The operator terminals E1101
and E1151 provide a
user-friendly TFT colour
touchscreen. The E1101 offers
a resolution of 800 x 600 pixels
on a 10" screen, the E1151 provides a 15" screen with 1024 x
768 pixels.
Power supply
Internal memory capacity
Memory card (intern./extern.)
Keyboard type
internal
Function keys
external
LED indicators
serial
Interfaces
parallel
others
Interface slot for optional cards
Real-time clock
Network communication possibilities
IP Rating (front panel)
Dimensions WxHxD (mm)
Weight (kg)
Order information
Art. no. 156096 / 203301
Accessories
E1071 / E1071 Pro+
E1100 / E1100 Pro+
156097 / 203302
156098 / 203303
156099 / 203334 ,
156100 / 203225, DT1151: 203326
Programming software E-Designer (refer to page 44), cables and interface adapters (refer to page 21), Profibus/DP module (refer to page 24)
17
MITSUBISHI ELECTRIC
HMI-Catalogue 2007 UK01-24.prn
HMI-Catalogue 2007 UK
Dienstag, 29. Mai 2007 19:19:18
Using a E1000 Pro+ operator
terminal gives the user all the
functionality of the standard
E1000 family and also makes it
possible to view external files
such as PDF files, HTML pages
and PowerPoint presentations
directly on the screen of the
operator terminal.
The DT1151 is an industrial
monitor with a 15" TFT-LCD
touch screen, designed to be
mounted in a cabinet and connected to an industrial PC.
The monitor is optimized for a
maximum resolution of 1024 x
768 pixels.
E1101 / E1101 Pro+,
E1151 / E1151 Pro+, DT1151
TFT
TFT
TFT
TFT
134 x 100 (6.5")
134 x 100 (6.5")
211 x 158 (10.4")
211 x 158 (10") , 304 x 228 (15")
User definable
User definable
User definable
User definable
User definable, Windows fonts
User definable, Windows fonts
User definable, Windows fonts
User definable, Windows fonts
640 x 480
640 x 480
800 x 600
800 x 600 , 1024 x 768
24 V DC (20 – 30 V)
24 V DC (20 – 30 V)
24 V DC (20 – 30 V)
24 V DC (20 – 30 V)
12 MB (expandable)
12 MB (expandable)
12 MB (expandable)
12 MB (expandable)
2 (compact flash 4 – 1024 MB)
2 (compact flash 4 – 1024 MB)
2 (compact flash 4 – 1024 MB)
2 (compact flash 4 – 1024 MB)
Membrane
Touch-panel
Membrane
Touch-panel
16 (8 with integrated LEDs)
Touch keys
20 (10 with integrated LEDs)
Touch keys
Max. 64 (optional with MAC-E-Key16) Max. 64 (optional with MAC-E-Key16) Max. 64 (optional with MAC-E-Key16) Max. 64 (optional with MAC-E-Key16)
18
1 (Power ON)
20
1 (Power ON)
RS232C, RS422, RS485
RS232C, RS422, 485
RS232C, RS422, RS485
RS232C, RS422, 485
—
—
—
—
USB
USB
USB
USB
1
1
1
1
Integrated
Integrated
Integrated
Integrated
Ethernet TCP/IP, Modbus TCP, MPI (all Ethernet TCP/IP, Modbus TCP, MPI (all Ethernet TCP/IP, Modbus TCP, MPI (all Ethernet TCP/IP, Modbus TCP, MPI (all
integrated); Profibus/DP (optional) integrated); Profibus/DP (optional) integrated); Profibus/DP (optional) integrated); Profibus/DP (optional)
IP65
IP65
IP65
IP65
285 x 177 x 62
219 x 154 x 61
382 x 252 x 64
302 x 228 x 64 , 398 x 304 x 60
1.3
1.1
2.3
2.0 / 3.7
E1070 / E1070 Pro+
type
dimensions (mm)
text (lines x characters)
character height (mm)
graphical resolution (pixels)
All E1000 operator terminals
on this page provide two PLC
ports, a USB host port to connect mouse, keyboard, printer
and USB memory as well as an
integrated Ethernet interface.
Profibus/DP is available via a
separate extension module.
The internal memory of 12 MB
can be expanded.
The integrated password protection protect the system
against unauthorised access,
and sixteen separate alarm
groups keep you informed on
all-important developments.
17
OPERATOR TERMINALS E SERIES
7
6
Farbprofil: Deaktiviert
Komposit Standardbildschirm
/// INDUSTRIAL PC'S
INDUSTRIAL PCs
왎 Industrial Panel PCs
IPC-MC1121
IPC-MC1151
IPC-VP1151
IPC-VP1171
Personal computers are a part
of everyday life as Industrial
PCs are a part of automation
and process control.
The new IPC1000 line based on
ETX technology offers
supreme computing performance with processors based
on Intel‘s Celeron/Pentium® M
technology at extreme low
power consumption.
The ETX technology permits
scalable CPU performances for
a wide range of industrial
applications. Ruggedly
designed for heavy-duty
industrial applications and
environments, these PCs feature high quality, fast performance, attractive design and
brilliantly legible displays.
A wide operating and storage
temperature range, tough
vibration resistance and high
IP ratings mean these IPCs can
be used in locations users
could never consider before.
The integrated innovative
cooling concept realizes passive and fanless cooling for
the highest processor performance up to Pentium® M,
reducing one of the major
moving parts that could fail.
The CANopen, DeviceNet or
Profibus field buses can
optionally be integrated
directly on board of the
V panel.
Specifications
Display unit
type
dimensions (mm)
graphical resolution
(pixels)
Power supply
Processor type
Operating system
Internal memory capacity
Screen type
Integrated harddisk
LED indicators
serial
Interfaces
others
LAN network interface
Free card slots
Cooling
Field busses
Internal Drives
IP Rating
Operating temperature range
Storage temperature range
Operating humidity range
Vibration resistance
Dimensions WxHxD (mm)
Order information
IPC-MC1121
TFT
12.1"
IPC-MC1151
TFT
15"
IPC-VP1151
TFT
15"
IPC-VP1171
TFT
17"
800 x 600
1024 x 768
1024 x 768
1280 x 1024
24 V DC
Intel Pentium M370 1.5 GHz
Windows XP Professional
512 MB RAM
Resistive analog touch-panel
40 GB
1 (Power ON)
2 x RS232C
5 x USB (1 x front; 4 x rear side)
1 x 10/100, 1 x 100/1000
2 x PCI, PCMCIA slot optional
Fanless
CANopen or DeviceNet or Profi bus
CompactFlash, HDD optional
IP65 (front)
0 – 50 °C
-20 – +60 °C
20 – 85 % (no condensation)
24 V DC
Intel Pentium M370 1.5 GHz
Windows XP Professional
512 MB RAM
Resistive analog touch-panel
40 GB
1 (Power ON)
2 x RS232C
5 x USB (1 x front; 4 x rear side)
1 x 10/100, 1 x 100/1000
2 x PCI, PCMCIA slot optional
Fanless
CANopen or DeviceNet or Profi bus
CompactFlash, HDD optional
IP65 (front)
0 – 50 °C
-20 – +60 °C
20 – 85 % (no condensation)
450 x 354 x 163
461 x 399 x 168
204307
204308
24 V DC
24 V DC
Intel Celereon 800 MHz
Intel Celereon 800 MHz
Windows XP Professional
Windows XP Professional
512 MB RAM
512 MB RAM
Resistive analog touch-panel
Resistive analog touch-panel
40 GB
40 GB
1 (Power ON)
1 (Power ON)
1 x RS232C
1 x RS232C
2 x USB (2 x rear side)
2 x USB (2 x rear side)
1 x 10/100
1 x 10/100
—
—
Fanless
Fanless
CANopen or DeviceNet or Profi bus
CANopen or DeviceNet or Profi bus
CompactFlash, HDD optional
CompactFlash, HDD optional
IP65 (front)
IP65 (front)
0 – 50 °C
0 – 50 °C
-20 – +60 °C
-20 – +60 °C
20 – 85 % (no condensation)
20 – 85 % (no condensation)
1 G: resistant to vibrations from 10 – 500 Hz along all 3 axes (acc. to EN 60068-2-6)
325 x 252 x 53
380 x 300 x 53
Art. no. 204305
204306
18
HMI-Catalogue 2007 UK01-24.prn
HMI-Catalogue 2007 UK
Dienstag, 29. Mai 2007 19:19:38
MITSUBISHI ELECTRIC
18
Farbprofil: Deaktiviert
Komposit Standardbildschirm
ACCESSORIES ///
왎 Special Interface Adapter and Cables for Operator Terminals GT15
Adapter type (use)
MELSEC A-Bus interface
Application
GT15 (1 channel), slim model
166243
GT15-ABUS
GT15 (1 channel), standard model
169467
GT15-75ABUS2SL
GT15 (2 channels), slim model
166304
Order number
GT15-ABUS2
GT15 (2 channels), standard model
169468
GT15-75QBUSSL
GT15 (1 channel), slim model
166305
GT15-QBUS
GT15 (1 channel), standard model
169465
GT15-75QBUS2SL
GT15 (2 channels), slim model
166306
GT15-QBUS2
GT15 (2 channels), standard model
169466
GT15-J71E71-100
GT15
166309
GT15-RS2-9P
GT15 (serial interface RS232, 9-pin D-Sub)
169469
GT15-RS2T4-9P
GT15 (converter RS232 -> RS422; 9-pin D-Sub)
166307
GT15-RS4-9S
GT15 (serial interface RS422/485, 9-pin D-Sub)
169470
GT15-RS4-TS
GT15 (serial interface RS422/485, screw terminals)
169471
GT15-RS2T4-25P
GT15 (converter RS232 -> RS422; 25-pin D-Sub)
166308
GT15-J61BT13
GT15
203494
GT15-75J71 BR13-Z
GT15 (for coaxial connection)
166311
GT15-75J71 LP23-Z
GT15 (for optical SI cable)
166312
USB
GT15-PRN
GT15
(for USB connection to pictbridge compatible printers)
170169
Option card
Application
GT15-FNB
Option card for the use of special functions
(without System Q support)
166313
GT15-QFNB
Option card for the use of special functions
(with System Q support)
166314
GT15-QFNB16M
Option card for the use of special functions
(with System Q support and 16 MB expansion memory for project data)
166315
GT15-QFNB32M
Option card for the use of special functions
(with System Q support and 32 MB expansion memory for project data)
166316
GT15-QFNB48M
Option card for the use of special functions
(with System Q support and 48 MB expansion memory for project data)
166317
GT15-MESB48M
Option card for the use of additional MES functionality
(with System Q support and 48 MB expansion memory for project data)
203473
Video unit
Application
GT15V-75V4
Video input unit for GT15 video compatible models, 4 x NTSC/PAL inputs
203497
GT15V-75R1
Video input unit for GT15 video compatible models, 1 x RGB composite input
203498
GT15V-75V4R1
Video input unit for GT15 video compatible models, 4 x NTSC/PAL inputs,
1 x RGB composite input
203499
GT15V-75ROUT
Video input unit for GT15 video compatible models, 1 x RGB composite
output
203500
MELSEC Q-Bus interface
Ethernet RJ45
Serial interface
e. g.:
Ethernet adapter GT15-J71E71-100
Interface name
GT15-75ABUSSL
CC-Link interface
MELSECNET/10
왎 Option Cards for GT15
The operator terminals of the GT15 series are
able to use several special functions built into
the terminal. To use multi-channel communication, document display, System Q ladder
monitor and MES functionality an option
board is required. They are fitted in the
expansion slot on the rear side of the terminal and are recognized automatically by the
GT15.
Further details on request.
Order number
왎 Video Interfaces for GT15
Video interfaces can be used with the GT15
video panels to support video functions.
With the help of these interfaces, images
from PC's, cameras and vision sensors can be
monitored on the GOT.
Further details on request.
19
MITSUBISHI ELECTRIC
HMI-Catalogue 2007 UK01-24.prn
HMI-Catalogue 2007 UK
Dienstag, 29. Mai 2007 19:19:47
Order number
19
ACCESSORIES
Several communications and interface
adapters are available for the GT15 operator
teminals. They support the controlling of
PLCs directly or within different networks.
Further details on request.
Farbprofil: Deaktiviert
Komposit Standardbildschirm
/// ACCESSORIES
왎 Cables
For all GOT and E series operator terminals
is a wide variety of different cables available.
ACCESSORIES
Operator terminal
All cables have to be ordered separately
due to the specific application.
The length for all cables is 3.0 m, if not differently indicated.
Interface
Connector
Cable
Connector
Periphery
Order number
F900GOT
RS232
D-SUB male
connector 9 pin
FX-232-CAB1
D-SUB male
connector 9 pin
Personal Computer
124972
F900GOT
RS232
D-SUB male
connector 9 pin
QC30R2
MINI-DIN male
connector 6 pin
MELSEC System Q
128424
F900GOT
RS422
D-SUB male
connector 9 pin
FX-40DU-CAB/EN
D-SUB male
MELSEC AnS/QnAS
connector 25 pin
and AnU/QnA
62503
F900GOT
RS422
D-SUB male
connector 9 pin
FX-50DU-CAB0/EN
MINI-DIN male
connector 8 pin
MELSEC FX
70451
GOT1000-Serie
Frontside
USB
MINI-B
USB
GT09-C20USB-5P
USB-A
Personal Computer
166373
(2 m length)
GOT1000-Serie
integrated RS232
D-SUB male
connector 9 pin
GT01-C30R2-6P
MINI-DIN male
connector 6 pin
MELSEC System Q
163959
GOT1000-Serie
integrated RS232
+GT15-RS2T4-9P
D-SUB male
connector 9 pin
GT01-C30R4-8P
MINI-DIN male
connector 8 pin
MELSEC FX
163948
further lengths on request
GOT1000-Serie
integrated RS232
+GT15-RS2T4-9P
D-SUB male
connector 9 pin
GT01-C30R4-25P
25 pin
GT10
RS232
Mini-DIN male
connector 6-pin
GT01-C30R2-6P
D-SUB male
connector 9 pin
PC
163959
GT10
RS422
open
terminals
GT10-C30R4-8P
MINI-DIN male
connector 8 pin
MELSEC FX
200494
further lengths on request
GT10
RS232
open
terminals
GT10-C30R2-6P
MINI-DIN male
connector 6 pin
MELSEC System Q
200498
GT10
RS232
Mini-DIN male
connector 6-pin
GT10-RS2TUSB-5S
MINI-B
USB
PC +
GT09-C20USB-5P
200500 +
166373
MELSEC AnS/QnAS
163953
and AnU/QnA further lengths on request
Programming cable
20
HMI-Catalogue 2007 UK01-24.prn
HMI-Catalogue 2007 UK
Dienstag, 29. Mai 2007 19:20:28
MITSUBISHI ELECTRIC
20
Farbprofil: Deaktiviert
Komposit Standardbildschirm
ACCESSORIES ///
왎 Cables
Operator terminal
Interface
Connector
Cable
Connector
Periphery
Order number
GT15
A-BUS
GT15-A1SC30B
A-BUS
166358
MELSEC AnS/QnAS further lengths
on request
GT15
A-BUS
GT15-AC30B
A-BUS
MELSEC AnS/QnAS
166380
and AnU/QnA further lengths on request
GT15
Q-BUS
GT15-QC30B
Q-BUS
166348
MELSEC System Q further lengths
on request
RS232
D-SUB female
connector 9 pin
CAB30
D-SUB female
connector 9 pin
Personal Computer
163002
MAC E-Serie
RS232
D-SUB female
connector 9 pin
CAB5 (MAC-PC-CAB-R2)
D-SUB female
connector 9 pin
Personal Computer
124265
MAC E/E1000
RS422
D-SUB male
connector 25 pin
CAB19
MINI-DIN male
connector 8 pin
MELSEC FX
146861
MAC E/E1000
RS422
D-SUB male
connector 25 pin
CAB18 (MAC40-CPU-CAB-R4)
MAC E/E1000
RS422
D-SUB male
connector 25 pin
CAB17
MINI-DIN male
connector 6 pin
MELSEC System Q
140472
MAC E-Serie
RS232
D-SUB male
connector 9-pin
CAB16
MINI-DIN male
connector 6 pin
MELSEC System Q
140461
E1000
RS232
D-SUB male
connector 9-pin
CAB34/3
MINI-DIN male
connector 6 pin
163006
MELSEC System Q further lengths
on request
E1000
RS422
D-SUB male
connector 25 pin
CAB36
D-SUB male
connector 9 pin
Siemens S7/MPI
direct
D-SUB male
MELSEC AnS/QnAS
146855
connector 25 pin
and AnU/QnA further lengths on request
205178
21
MITSUBISHI ELECTRIC
HMI-Catalogue 2007 UK01-24.prn
HMI-Catalogue 2007 UK
Dienstag, 29. Mai 2007 19:21:11
ACCESSORIES
E1000
21
Farbprofil: Deaktiviert
Komposit Standardbildschirm
/// ACCESSORIES
왎 Special Connection Cables for the Graphic Handy Operator Terminals
Connection of the Handy Operator Terminals to the PLC CPU
The cable is connected to the plug on the
back side of the F940GOT, which provides
a larger operating range than fixed
mounted terminals. The cable is lead into
the cabinet or panel and enables the
Interface
F940GOT
Handy
RS422, internal connector on
the rear side of the Handy GOT
F940GOT
Handy
ACCESSORIES
Operator terminal
Connector
Periphery
F9GT-HCAB- M
F9GT-HCAB2-150
MINI-DIN male
connector 8 pin
MELSEC FX
RS422, internal connector on
the rear side of the Handy GOT
F9GT-HCAB- M
F9GT-HCAB3-150
D-SUB male
connector 25 pin
MELSEC FX, AnS/QnAS,
AnU/QnA
F943GOT
Handy
RS232C, internal connector on
the rear side of the Handy GOT
F9GT-HCAB-3M
F9GT-HCAB5-150
MINI-DIN male
connector 6 pin
MELSEC System Q
GT11
Handy
External cable
GT11H-C30-37P /
GT11H-C60-37P /
GT11H-C100-37P
GT11H-C15R4-8P
MINI-DIN male
connector 8 pin
MELSEC FX
GT11
Handy
External cable
GT11H-C30-37P /
GT11H-C60-37P /
GT11H-C100-37P
GT11H-C15R4-25P
D-SUB male
connector 25 pin
MELSEC FX, AnS/QnAS,
AnU/QnA
GT11
Handy
External cable
GT11H-C30-37P /
GT11H-C60-37P /
GT11H-C100-37P
GT11H-C15R2-6P
MINI-DIN male
connector 6 pin
MELSEC System Q
Cable type
Connector 1
Connector 2
Further connections
Applicable CPU type
Length
Order information
F9GT-HCAB-3M
External cable for F940GOT/F943GOT
(F943 only 3M)
Internal F940GOT plug
D-SUB male connector 25 pin
—
—햲
m 3.0
Art. no. 130213
Switch cabinet
F9GT-HCAB2-150
F9GT-HCAB3-150
F9GT-HCAB5-150
Extension cable between cabinet/panel and PLC CPU
D-SUB female connector 25 pin
MINI-DIN male connector 8 pin
For power supply and external signals
MELSEC FX family
1.5
D-SUB female connector 25 pin
D-SUB male connector 25 pin
For power supply and external signals
MELSEC AnS/QnAS and AnU/QnA
1.5
D-SUB female connector 25 pin
MINI-DIN male connector 6 pin
For power supply and external signals
MELSEC System Q
1.5
130299
130212
142538
For the connection of the PLC CPU a further cable is required (F9GT-HCAB2-150 for MELSEC FX CPU or F9GT-HCAB3-150 for MELSEC AnS/QnAS CPU or F9GT-HCAB5-150 for MELSEC System Q CPU)
Specifications
Cable type
Connector 1
Connector 2
Further connections
Applicable CPU type
Length
Order information
햲
Cable
From there it is easy to connect the line to
the PLC.
Cable
Specifications
햲
mobile connection of the Handy GOT
using the interface in a cabinet or control
panel. The GT11 handy terminals carry a
bayonet-joint at the lower end of the unit.
GT11H-C30-37P / GT11H-C60-37P /
GT11H-C100-37P
External cable for GT11 handy
Round female connector 32 pin
D-SUB male connector 37 pin
—
—햲
m 3.0 / 6.0 / 10
Art. no. 191013 / 191014 / 191015
GT11H-C15R4-8P
GT11H-C15R4-25P
GT11H-C15R2-6P
Relay cable
D-SUB female connector 37 pin
MINI-DIN male connector 8 pin
For power supply and external signals
MELSEC FX family
1.5
Relay cable
D-SUB female connector 37 pin
D-SUB male connector 25 pin
For power supply and external signals
MELSEC AnS/QnAS and AnU/QnA
1.5
Relay cable
D-SUB female connector 37 pin
MINI-DIN male connector 6 pin
For power supply and external signals
MELSEC System Q
1.5
191019
191020
191021
For the connection of the PLC CPU a further cable is required (GT11H-C15R4-8P for MELSEC FX CPU or GT11H-C15R4-25P for MELSEC AnS/QnAS CPU or GT11H-C15R2-6P for MELSEC System Q CPU)
22
HMI-Catalogue 2007 UK01-24.prn
HMI-Catalogue 2007 UK
Dienstag, 29. Mai 2007 19:21:29
MITSUBISHI ELECTRIC
22
Farbprofil: Deaktiviert
Komposit Standardbildschirm
ACCESSORIES ///
왎 Cables for Third Party Manufacturers
Operator terminal
MAC E series
E1000 series
Interface
RS232 / RS422
CAB5 connects the Siemens HMI adapter
for MPI with the MAC E series terminal
RS232 port (same as programming cable
MAC-PC-CAB-R2,art.no.62894).
CAB30 is a connection cable for E1000
series terminals, it connects the Siemens
HMI adapter for MPI with the RS232 port.
CAB8 is a communications adapter for
RS485 networks by using the RS422 port.
Connector
Cable
D-SUB male
connector
CAB11 is an HMI adapter cable for the
connection of a Siemens SIMATIC S7/MPI
with CAB5 (for MAC E series) or CAB30 (for
E1000 series). CAB11 can also be used for
GOT1000 series (with selfmade
GT11+GT15 cable).
Below an example is shown.
Connector
CAB5 / CAB8 / CAB11
CAB30 / CAB8 / CAB11
Periphery
Order number
Depends on the PLC
of the third party Third party PLC
manufacturer
Refer to the table below
Specifications
CAB5
CAB30
CAB8
CAB11
Application for
Siemens HMI adapter for MPI
Siemens HMI adapter for MPI
RS485 networks
Siemens S7/MPI
Siemens S7/MPI
HMI RS232 (MAC E series)
RS232 (E1000)
RS422 (E series)
RS232 (all GOT1000 / E series)
RS422
PLC RS232
RS232
RS485
RS232
MPI (9-pin D sub)
3.0
—
3.0
3.0
163002
124268
132351
205178
Interfaces
Length
Order information
m 3.0
Art. no. 124265
CAB36
ACCESSORIES
These cables can only be used for the connection of an E series operater terminal to
a Third Party Manufacturer PLC.
They all have the name CAB with a specific
number.
왎 Interface Converter CR01-R2/R4 SET and CR01-R4/R4
CR01-R2/R4 SET and CR01-R4/R4
These modules aresignal repeater with
electrical isolation for RS422 signals.
The regular maximum distance between
two CR01 modules is 1200 m.
Specifications
CR01-R2/R4 SET
CR01-R4/R4
Conversion
RS232↔RS422
RS422↔RS422
RS422 interface
Terminal strip + 25 pin D-SUB male connector for both units
RS232 interface
9 pin D-SUB male connector
Nominal voltage
V AC 115 / 230
Voltage range
V AC 90 – 130 / 150 – 255
—
115 / 230
90 – 130 / 150 – 255
Supply frequency range
Hz 48 – 62
48 – 62
Power consumption
VA 6
6
Protection rating
Weight
Order information
IP20
IP20
kg 0.55
0.55
Art no. 56172
56173
23
MITSUBISHI ELECTRIC
HMI-Catalogue 2007 UK01-24.prn
HMI-Catalogue 2007 UK
Dienstag, 29. Mai 2007 19:21:42
If only one interface converter is in use,
the maximum distance is 500 m.
The modules include a DIN rail adapter
and LEDs indicating the flow of data.
23
Farbprofil: Deaktiviert
Komposit Standardbildschirm
/// ACCESSORIES
왎 General Accessories
Screen surface protection
Keyboard extension MAC E-Key-16
Protective film sheets protect the sensitive
screen of the unit from scratches and
reflections.
For all E series graphical operator terminals
(E 300 and higher) the keyboard extension
E-Key-16 is available.
Up to 4 keyboard extensions can be connected to one operator terminal.
The keyboard extension provides 16 function keys and LEDs, which can be used and
programmed as the standard integrated
keyboard.
Stands
For the GT155x terminals stands for
table-top installation are available. The
stands are useful for debugging the GOT
screen data, as they can set the GOT at a
proper angle on the table.
Specifications
GT11-50PSCB
Type of accessory
Protective film sheets for the display surface of the GOT1000 series operator terminals
Use for operator terminal
GT11
GT155x with
5.7" display
GT15-60PSCB
GT15-70PSCB
GT15-80PSCB
GT15-90PSCB
F9GT-40PSC
Protective film sheets
for the
display surface
GT15 with
8.4" display
GT15 with
10.4" display
GT15 with
12.1" display
GT15 with
15" display
F940GOT-LWD/SWD-E
Set of
5
5
5
5
5
5
5
Type or details
Clear
Clear
Clear
Clear
Clear
Clear
Anti-reflection
203501
166329
166333
166337
169476
126743
Order information
ACCESSORIES
GT15-50PSCB
Art. no. 163645
Specifications
GT05-50STAND
Type of accessory
Stand for table-top installation
Use for operator terminal
GT11 and GT15 with
5.7" display
GT15 with
10.4" display
Set of
1
Type or details
—
Order information
Art. no. 203502
GT15-70STAND
GT15-80STAND
GT15-BAT
MAC E-Key-16
Buffer battery for realtime clock
and historical data backup
External keyboard extension for
E series
GT15 with
12.1" display
GT15
E300/E600/E610/
E615/ E1000 series
1
1
1
1
—
—
Lithium battery
Connection via RS232C/RS422
166341
166342
166345
148995
왎 Communications Adapter
Communications adapter
For the E1000 series a Profibus/DP Slave
adapter E1000-EM-Profibus/DP is available. This is attached at the extension port
at the rear side of the control terminal. The
parametrization and setting of the network address are made in the software
E-Designer.
IFC ETTP
The optional MAC-IFC-ETTP interface
card is used for Ethernet connection with
twisted pair cable.
Specifications
E1000-EM-Profibus/DP
MAC-IFC-ETTP
Use for operator terminal
E1000 series
E300/E600/E610/E615
(can be used with E700/E710/E900T/E900VT/E910T, too)
Type
Adapter
Plug-in board
Plug-in board
Profibus/DP Slave
Interface for Ethernet
(Twisted Pair)
Profibus/DP Slave
104727
56166
Application
Order information
Art. no. 169488
24
HMI-Catalogue 2007 UK01-24.prn
HMI-Catalogue 2007 UK
Dienstag, 29. Mai 2007 19:21:52
The MAC-IFC-PBDP/E PROFIBUS/DP interface board supports the connection of the
control units of the MAC E series to a
PROFIBUS/DP network.
MAC-IFC-PBDP/E
MITSUBISHI ELECTRIC
24
Farbprofil: Deaktiviert
Komposit Standardbildschirm
DIMENSIONS ///
COM0 RS-422
COM1 RS-232C
F1
F2
F3
7
8
9
4
5
6
1
2
3
0
+/-
.
90
F4
F5
F6
SET
ESC
DEV
ENT
118
134
왎 F920GOT-BBD5-K-E
106
5
119
35,5
Switchboard
cutout
All dimensions in mm
92
183
169
DIMENSIONS
왎 F930GOT-BBD-K-E
7
8
9
4
5
6
1
2
3
0
-
.
154
SET
ESC
DEV
ENT
168
6
170
37,5
Switchboard
cutout
All dimensions in mm
155
25
MITSUBISHI ELECTRIC
HMI-Catalogue 2007 UK25-47.prn
HMI-Catalogue 2007 UK
Mittwoch, 30. Mai 2007 11:03:38
25
Farbprofil: Deaktiviert
Komposit Standardbildschirm
/// DIMENSIONS
왎 F930GOT-BWD-E
49
136
146
RS232C
MITSUBISHI PROGRAMMABLE
CONTROLLER
F930GOT-BWD
75
MODEL
GRAPHIC OPERATION TERMINAL
CAUTION
SERIAL NO. 970340 V.1 . 11
65
RS422
45
MITSUBISHI ELECTRIC CORPORATION
24VDC
-
+
Switchboard cutout
+1
+1
137 0 x 66 0
All dimensions in mm
왎 F940GOT-SWD-E / F940GOT-LWD-E
57
GRAPHIC OPERATION TERMINAL
SERIAL NO. 912370 V.1 . 11
120
MITSUBISHI PROGRAMMABLE
CONTROLLER
F940GOT-SWD
MODEL
130
5
MITSUBISHI ELECTRIC CORPORATION
POWER
DIMENSIONS
CAUTION
24VDC
152
162
Switchboard cutout
153±1 x 121±1 mm
All dimensions in mm
133
123
왎 F940WGOT
215
70,6
5
205
Switchboard cutout
206 x 124 (+1,0; -0)
26
HMI-Catalogue 2007 UK25-47.prn
HMI-Catalogue 2007 UK
Mittwoch, 30. Mai 2007 11:03:46
MITSUBISHI ELECTRIC
26
Farbprofil: Deaktiviert
Komposit Standardbildschirm
DIMENSIONS ///
왎 F940GOT-LBD-H-E / F940GOT-SBD-H-E / F940GOT-LBD-RH-E / F940GOT-SBD-RH-E
156
50.5
172
191
13
POWER
GRIP SW
All dimensions in mm
왎 GT1150HS-QLBD / GT1155HS-QSBD
18
209
204
16
50
DIMENSIONS
75
72
62
3.5
168
74
176
All dimensions in mm
27
MITSUBISHI ELECTRIC
HMI-Catalogue 2007 UK25-47.prn
HMI-Catalogue 2007 UK
Mittwoch, 30. Mai 2007 11:03:52
27
Farbprofil: Deaktiviert
Komposit Standardbildschirm
/// DIMENSIONS
74
65
왎 GT1020-LBL, GT1020-LBD, GT1020-LBD2
27
66 +1-0
113
105 +1-0
All dimensions in mm
왎 GT1150-QLBD, GT1155-QSBD
164
DIMENSIONS
164
120
135
135
10
120
10
120
5
164
53
53
47
120
Switchboard cutout
153 x 121
+2
–0
152
135
+2
–0
All dimensions in mm
28
HMI-Catalogue 2007 UK25-47.prn
HMI-Catalogue 2007 UK
Mittwoch, 30. Mai 2007 11:03:58
MITSUBISHI ELECTRIC
28
Farbprofil: Deaktiviert
Komposit Standardbildschirm
DIMENSIONS ///
왎 GT1562-VNBA, GT1565-VTBA
GT1562-VNBD, GT1565-VTBD
241
175
190
10
175.5
Switchboard cutout
227 x 165
10
+2
–0
+2
–0
52
6
56
5
175.5
226
All dimensions in mm
DIMENSIONS
왎 GT1572-VNBA, GT1575-VNBA, GT1575-VTBA, GT1575-STBA
GT1572-VNBD, GT1575-VNBD, GT1575-VTBD, GT1575-STBD
Switchboard cutout
289 x 200
+2
–0
+2
–0
All dimensions in mm
29
MITSUBISHI ELECTRIC
HMI-Catalogue 2007 UK25-47.prn
HMI-Catalogue 2007 UK
Mittwoch, 30. Mai 2007 11:04:15
29
Farbprofil: Deaktiviert
Komposit Standardbildschirm
/// DIMENSIONS
왎 GT1585-STBA
GT1585-STBD
Switchboard cutout
302 x 228
+2
–0
+2
–0
왎 GT1595-XTBA
10
397
296
320
281
DIMENSIONS
All dimensions in mm
Switchboard cutout
383,5 x 282,5
+2
–0
6
61
5
10
320
+2
–0
382
All dimensions in mm
30
HMI-Catalogue 2007 UK25-47.prn
HMI-Catalogue 2007 UK
Mittwoch, 30. Mai 2007 11:04:32
MITSUBISHI ELECTRIC
30
Farbprofil: Deaktiviert
Komposit Standardbildschirm
DIMENSIONS ///
왎 E50
38
4,5
6
104
69
57
50
F1
F2
F3
F4
6
PREV
84
10
max. 80
10
Switchboard cutout
86±1 x 59±1 mm
All dimensions in mm
왎 E100
142
29
3
6,5
50
LCD
Contrast
Ext.DC
RS-232
12
118
12
MAX 80
16,5
M4x14
Switchboard cutout
80±1 x 121±1 mm
DIMENSIONS
5,5
19
RS-422
78
90
+5V DC
All dimensions in mm
왎 E150
29
3
6,5
142
150
Supplied by class 2 power supply
U
Class I, Div 2
Groups A,B,C,D,T4
®
Ind.Cont.Eq.ForHaz.Loc.
24GN
E207750
+5V DC
+
-
RS232
0
12
7
8
4
5
6
1
2
3
Ext.DC
9
15,5
RS422
118
12
M4x14
Switchboard cutout
80±1 x 121±1 mm
19
L US
LISTED
78
C
100
LCD
Contrast
MAX 80
16,5
All dimensions in mm
31
MITSUBISHI ELECTRIC
HMI-Catalogue 2007 UK25-47.prn
HMI-Catalogue 2007 UK
Mittwoch, 30. Mai 2007 11:04:39
31
Farbprofil: Deaktiviert
Komposit Standardbildschirm
/// DIMENSIONS
왎 E200
38
6,5
147
5
144
163,5
E 200
7
8
9
ABCD
EFGH
IJKL
4
5
6
MNOP
QRST
UVWX
LIST
1
2
3
YZ!?
C1-C4
<> ()
-
0
•
+/*=
°%#:
23
RS232
[
RS422
MAIN
‘
13
24V DC
Max 80
13
121
27
13
Switchboard cutout
123±1 x 150±1 mm
M4x15
All dimensions in mm
24,5
198
149
24,5
DIMENSIONS
왎 E300
211,5
39
30
5,7
MAX 110
188
13
10,5
MAX 76
Switchboard cutout
190±2 x 153±2 mm
M4x15
All dimensions in mm
32
HMI-Catalogue 2007 UK25-47.prn
HMI-Catalogue 2007 UK
Mittwoch, 30. Mai 2007 11:04:45
MITSUBISHI ELECTRIC
32
Farbprofil: Deaktiviert
Komposit Standardbildschirm
DIMENSIONS ///
232
149
22,5
왎 E600
RS-422
RS-232
60,5
24V DC
5
214
39
30
MAX 110
188
14
12
Switchboard cutout
190±2 x 190±2 mm
MAX 76
M4x15
DIMENSIONS
All dimensions in mm
왎 E610 / E615
200
5
24VDC
RS-422
RS-232
MAX 76
8,7
138
150
8,7
69
RS-485
9
183
Switchboard cutout
188 x 139 mm
8
MAX 76
All dimensions in mm
33
MITSUBISHI ELECTRIC
HMI-Catalogue 2007 UK25-47.prn
HMI-Catalogue 2007 UK
Mittwoch, 30. Mai 2007 11:04:51
33
Farbprofil: Deaktiviert
Komposit Standardbildschirm
/// DIMENSIONS
왎 E1032
Switchboard cutout
166 × 149 mm
COM2
RS232
COM1
RS422/485
CF switches
Dip
USB
Ethernet
A
max. 7,5
DIMENSIONS
All dimensions in mm
왎 E1041/E1043
Switchboard cutout
139 × 105 mm
COM2
RS232
COM1
RS422/485
A
max. 7,2
A
All dimensions in mm
34
HMI-Catalogue 2007 UK25-47.prn
HMI-Catalogue 2007 UK
Mittwoch, 30. Mai 2007 11:05:10
MITSUBISHI ELECTRIC
34
Farbprofil: Deaktiviert
Komposit Standardbildschirm
DIMENSIONS ///
왎 E1060
Switchboard cutout
240 × 130 mm
COM2
RS232
COM1
RS422/485
max. 7.5
CF
CF memory card
Battery
Dip switches
USB
Ethernet
A
A
All dimensions in mm
DIMENSIONS
왎 E1061 / E1063
Switchboard cutout
180 ×130 mm
COM2
RS232
COM1
RS422/485
max. 7,5
CF memory
card
Battery
Dip
CF switches
USB
Ethernet
A
A
All dimensions in mm
35
MITSUBISHI ELECTRIC
HMI-Catalogue 2007 UK25-47.prn
HMI-Catalogue 2007 UK
Mittwoch, 30. Mai 2007 11:05:31
35
Farbprofil: Deaktiviert
Komposit Standardbildschirm
/// DIMENSIONS
왎 E1070
139±1
246±1
Switchboard
cutout
244
285
177
134
20
27
A
24V DC
A
max 9. mm
56
62
왎 E1100
343±1
208±1
DIMENSIONS
All dimensions in mm
Switchboard
cutout
342
22
252
207
23
382
A
24V DC
A
max. 9 mm
58
64
All dimensions in mm
36
HMI-Catalogue 2007 UK25-47.prn
HMI-Catalogue 2007 UK
Mittwoch, 30. Mai 2007 11:05:37
MITSUBISHI ELECTRIC
36
Farbprofil: Deaktiviert
Komposit Standardbildschirm
DIMENSIONS ///
왎 E1071
137,5±1
188,5±1
Switchboard cutout
187
219
136
154
6
21
max. 9 mm
55
61
All dimensions in mm
DIMENSIONS
왎 E1101
206±1
264,5±1
Switchboard cutout
263
302
204
228
13
25
max. 9 mm
58
64
All dimensions in mm
37
MITSUBISHI ELECTRIC
HMI-Catalogue 2007 UK25-47.prn
HMI-Catalogue 2007 UK
Mittwoch, 30. Mai 2007 11:05:43
37
Farbprofil: Deaktiviert
Komposit Standardbildschirm
/// DIMENSIONS
왎 E1151
354
22
304
277
14
398
max. 9 mm
Switchboard cutout
278.5±1 x 355.5±1 mm
60
66
DIMENSIONS
All dimensions in mm
왎 DT1151
56
354
398
50
277
304
14
22
All dimensions in mm
38
HMI-Catalogue 2007 UK25-47.prn
HMI-Catalogue 2007 UK
Mittwoch, 30. Mai 2007 11:05:51
MITSUBISHI ELECTRIC
38
Farbprofil: Deaktiviert
Komposit Standardbildschirm
DIMENSIONS ///
왎 Keyboard Extension MAC E-Key-16
5,5
RS-232
RS-485
1 2 3 4
80
RS-422
15
22
0V
Tx/Rx -
Tx/Rx +
24VDC
1 2 3
- +
110
15
28
200
13
max. 80
95
4
95
100
9,5
168
22,5
max. 16
min. 14
Switchboard cutout
186±1 x 88±4 mm
6 x ø3,5
2
DIMENSIONS
All dimensions in mm
39
MITSUBISHI ELECTRIC
HMI-Catalogue 2007 UK25-47.prn
HMI-Catalogue 2007 UK
Mittwoch, 30. Mai 2007 11:05:54
39
Farbprofil: Deaktiviert
Komposit Standardbildschirm
/// DIMENSIONS
왎 Industrial PCs
왎 IPC-MC1151
380
343
46.75
14.75
83.5
127.5
300
273
255
116.5
127.5
6
9.5
325
Switchboard cutout
325 x 255
All dimensions in mm
DIMENSIONS
왎 IPC-MC1171
6
51.25
19.25
161.25
71.25
362
335
322.5
128.75
161.25
452
415
400
9.5
Switchboard cutout
400 x 322.5
All dimensions in mm
40
HMI-Catalogue 2007 UK25-47.prn
HMI-Catalogue 2007 UK
Mittwoch, 30. Mai 2007 11:06:19
MITSUBISHI ELECTRIC
40
Farbprofil: Deaktiviert
Komposit Standardbildschirm
DIMENSIONS ///
왎 IPC-VP1151
6
152.75
34.25
311
354
327
277
449.4
422.4
372.4
406.4
Switchboard cutout
406.4 × 311
All dimensions in mm
DIMENSIONS
왎 IPC-VP1171
461
434
361
160
41.5
399
372
299
356
6
418
Switchboard cutout
418 × 356
All dimensions in mm
41
MITSUBISHI ELECTRIC
HMI-Catalogue 2007 UK25-47.prn
HMI-Catalogue 2007 UK
Mittwoch, 30. Mai 2007 11:08:53
41
Farbprofil: Deaktiviert
Komposit Standardbildschirm
/// SOFTWARE AND PROGRAMMING
MELSOFT – Programming and Documentation Software for Standard Personal Computers
With the MELSOFT software family Mitsubishi Electric offers efficient software packages
helping to reduce programming and setup times to a high degree.
The MELSOFT software family provides instant access, direct communications, compatibility, and open exchange of variables.
The MELSOFT family comprises:
앬 Programming packages like GX Developer and GX IEC Developer
앬 Software for a dynamic data exchange like MX Change
앬 Visualization software like for example MX4 HMI
앬 Programming software for GOT operator terminals GT-Works
앬 Programming software for E series operator series E-Designer
앬 PC-based HMI systems for GOT operator terminals GT SoftGOT1000
For detailed information please order our separate MELSOFT brochure.
왎 Visualization Software MX4 HMI
MX4 HMI
MX4 HMI is a reduced version of MX4 SCADA.It includes many of the functions of
MX4 SCADA,but has been designed for standalone HMI applications.
The main features are:
앬 A large number of I/O points ranging from 100 to a maximum of 600, with the ability to
connect to three different types of drivers.
앬 It is a scalable solution that can be upgraded from a HMI to a SCADA solution and then
have additional upward connectivity to business systems.
앬 Basic functions like alarms, trend analysis and reports have been set-up and are
SOFTWARE & PROGRAMMING
ready-to-use, saving you time and the expertise needed to program them.
앬 The use of super genies enables you to save repetitive machinery processes, and repli-
cate the process by a click of a button. This saves time and the cost of skilled labour, allowing a complex task to be performed much more simply.
Specifications
System
requirements
Development version/ Demo version Run-Time version
Pentium based 266 MHz or compatible PC with MS Windows NT®,
MS Windows 2000® or MS Windows XP®
computer
memory
Min. 96 MB (MS Windows NT®)
Free harddisk space
200 MB
Networks
TCP/IP (using ETHERNET), UDP
Operating system
MS Windows NT/2000® or MS Windows XP®
Driver
FastLinx (included with MX4)
Order information
Art. no. 153421
42
HMI-Catalogue 2007 UK25-47.prn
HMI-Catalogue 2007 UK
Mittwoch, 30. Mai 2007 11:08:56
On request
MITSUBISHI ELECTRIC
42
Farbprofil: Deaktiviert
Komposit Standardbildschirm
SOFTWARE AND PROGRAMMING ///
왎 GT Works2 (GT SoftGOT1000 and GT Designer2)
GT Works2
GTWorks2 is a wide-ranging programming and visualization control tool from Mitsubishi.
Included are the two main program parts GT SoftGOT1000 and GT Designer2 as well as a
HMI simulator and a converter for former projects. The software language is English,
a German version is also available. Please remark when ordering.
GT SoftGOT1000
A major benefit of GT Works2 is that visualisation screens can be created independently
of their final target platform, i. e. a hardware platform such as GOT900 or GOT1000 or a PC
based platform such as GT SoftGOT1000. This is a PC based HMI module within
GTWorks2. A further benefit of GT SoftGOT1000 is that it inherits the advanced simulation
features of GTWorks2. It can be simulated in a stand-alone configuration or in conjunction
with GX Simulator, linking both PLC and HMI simulation code for a true integrated
approach.
앬
앬
앬
앬
앬
Platform independent, screens created can be used for SoftHMI or hardware based GOT HMIs.
Remote monitoring and operation by intranet LAN is possible.
E-mail support for alarms
Recording of historical Data in user-friendly formats
Communication with MELSEC PLCs via serial communication, USB (to System Q port) or
Ethernet possible
앬 Windows and Microsoft programs can be accessed from within Soft GOT1000
GT Designer2
As part of GTWorks2, GT Designer2 is a drawing program designed to create HMI screens
for GOT900 and GOT1000 series. A user-friendly Windows environment provides the user
with a simple and recognisable interface, reducing the time of their learning curve and
the training costs associated with it. The package consists of:
앬 An extensive picture and graphics library editor that enables you to modify the
gives you the opportunity to navigate through your project and add, delete or move
any programs or functions, creating a more logical flow to your menu structure.
앬 The combination of GT Simulator and GX Simulator allows you to test both the HMI
and PLC coding offline, on your PC without the need to connect to physical hardware.
앬 Configuration of up to ten languages in the application, easy to edit by using the open
Excel format
Specifications
GTWorks2 (GT SoftGOT1000 & GT Designer2)
Application for
All GOT operator terminals
Software language
English, German
Operating system
MS Windows 98®, MS Windows ME®, MS Windows NT 4.0®,
MS Windows 2000®, MS Windows® XP
System requirements
Pentium II PC with at least 300 MHz, 128 MB RAM and 400 MB free harddisk space
Required computer interface
RS232C, USB, Ethernet
version: English: 203267
Art. no. Full
Full version: German: 193465
Order information
43
MITSUBISHI ELECTRIC
HMI-Catalogue 2007 UK25-47.prn
HMI-Catalogue 2007 UK
Mittwoch, 30. Mai 2007 11:08:58
2 licences and more: 203268
2 licences and more: 193466
43
SOFTWARE & PROGRAMMING
graphics to meet your exact specifications.
앬 A tree format of the project gives you an overview of the structure of the project. This
Farbprofil: Deaktiviert
Komposit Standardbildschirm
/// SOFTWARE AND PROGRAMMING
Programming HMI
왎 E-Designer
Programming Software for all E Series Operator Terminals
The programming software E-Designer provides easy creation of projects for all control
units in the MAC E series.
The block manager displays the application graphically and clearly and saves time for the
creation.
E-Designer supports the following languages on the desktop:
english, german, spanish, italian, french, swedish
앬
앬
앬
앬
앬
앬
앬
Full support of the Windows editing functions (e.g. cut, copy, paste etc.)
Extensive documentation and storage functions
Different projects can be edited simultaneously.
Multi-language support for up to 10 languages in the application
The name list is compatible to GX IEC Developer.
E-Designer is supported by MX-Change.
Simulation mode for E1000 projects
Specifications
E-Designer V0730-1LOC-M
Application
All E series control units
Software language
English, german, spanish, italian, french, swedish
Storage media
CD-ROM
E-Designer V0730-1LOC-M-UP
Operating system
MS Windows 98®, MS Windows ME®, MS Windows NT 4.0®, MS Windows 2000®, MS Windows® XP
System requirements
PC with at least 32 MB RAM and 55 MB free harddisk space
Required computer interface
RS232C, Ethernet
Version
Full version 7.30
Art. no. 204628
Upgrade version (from version 6.x to 7.x)
Update version (minor version change in version 7.x)
204629
204630
SOFTWARE & PROGRAMMING
Order information
E-Designer V0730-1LOC-M-UPD
44
HMI-Catalogue 2007 UK25-47.prn
HMI-Catalogue 2007 UK
Mittwoch, 30. Mai 2007 11:09:00
MITSUBISHI ELECTRIC
44
Farbprofil: Deaktiviert
Komposit Standardbildschirm
45
MITSUBISHI ELECTRIC
HMI-Catalogue 2007 UK25-47.prn
HMI-Catalogue 2007 UK
Mittwoch, 30. Mai 2007 11:09:01
45
Farbprofil: Deaktiviert
Komposit Standardbildschirm
46
HMI-Catalogue 2007 UK25-47.prn
HMI-Catalogue 2007 UK
Mittwoch, 30. Mai 2007 11:09:03
MITSUBISHI ELECTRIC
46
Farbprofil: Deaktiviert
Komposit Standardbildschirm
/// INDEX
Accessories
Dimensions
Buffer battery . . . . . . . . . . . . . . .
Cables . . . . . . . . . . . . . . . . . . . .
Cables for Third Party Manufacturers
Communications adapter . . . . . . .
CR01-R2/R4 SET. . . . . . . . . . . . . .
CR01-R4/R4 . . . . . . . . . . . . . . . .
F9GT-40PSC . . . . . . . . . . . . . . . .
GT11-첸첸PSCB . . . . . . . . . . . . . .
Interface adapters for GT15 . . . . . .
Interface converter. . . . . . . . . . . .
Keyboard extension . . . . . . . . . . .
MAC E-Key-16 . . . . . . . . . . . . . . .
Option cards for GT15 . . . . . . . . . .
Protective film sheets . . . . . . . . . .
Stands. . . . . . . . . . . . . . . . . . . .
Video interfaces . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
24
20
23
24
23
23
24
24
19
23
24
24
19
24
24
19
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
23
21
23
23
21
21
21
21
23
21
23
22
22
22
22
20
20
20
20
20
20
20
20
20
20
22
22
22
22
20
20
20
21
21
20
20
Cables
CAB5 . . . . . . . . . . . . . . .
CAB5 (MAC-PC-CAB-R2) . . .
CAB8 . . . . . . . . . . . . . . .
CAB11 . . . . . . . . . . . . . . .
CAB16 . . . . . . . . . . . . . . .
CAB17 . . . . . . . . . . . . . . .
CAB18 (MAC40-CPU-CAB-R4)
CAB19 . . . . . . . . . . . . . . .
CAB30 . . . . . . . . . . . . . . .
CAB34/3 . . . . . . . . . . . . .
CAB36 . . . . . . . . . . . . . . .
F9GT-HCAB2-150. . . . . . . .
F9GT-HCAB3-150. . . . . . . .
F9GT-HCAB-3M . . . . . . . . .
F9GT-HCAB5-150. . . . . . . .
FX-232-CAB1 . . . . . . . . . .
FX-40DU-CAB/EN. . . . . . . .
FX-50DU-CAB0/EN . . . . . . .
GT01-C30R2-6P . . . . . . . . .
GT01-C30R4-25P . . . . . . . .
GT01-C30R4-8P . . . . . . . .
GT09-C20USB-5P . . . . . . . .
GT10-C30R4-8P . . . . . . . . .
GT10-C30R2-6P . . . . . . . . .
GT10-RS2TUSB-5S . . . . . . .
GT11H-C15R4-8P . . . . . . . .
GT11H-C30-37P. . . . . . . . .
GT11H-C60-37P. . . . . . . . .
GT11H-C100-37P . . . . . . . .
GT15-A1SC30B . . . . . . . . .
GT15-AC30B . . . . . . . . . . .
GT15-QC30B. . . . . . . . . . .
MAC40-CPU-CAB-R4. . . . . .
MAC-PC-CAB-R2 . . . . . . . .
Overview . . . . . . . . . . . . .
QC30R2 . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Communications adapter
E1000-EM-Profibus/DP . . . . . . . . . . . 24
MAC-IFC-ETTP. . . . . . . . . . . . . . . . . 24
MAC-IFC-PBDP/E . . . . . . . . . . . . . . . 24
E series . . . . . . . . . . . . . . . . . . . . . 31
GOT series . . . . . . . . . . . . . . . . . . . 25
Industrial PCs . . . . . . . . . . . . . . . . . 40
E series operator terminals
Dimensions .
DT1151 . . . .
E50. . . . . . .
E100 . . . . . .
E150 . . . . . .
E200 . . . . . .
E300 . . . . . .
E600 . . . . . .
E610 . . . . . .
E615 . . . . . .
E1032 . . . . .
E1041 . . . . .
E1043 . . . . .
E1060 . . . . .
E1061 . . . . .
E1063 . . . . .
E1070 (Pro+).
E1071 (Pro+).
E1100 (Pro+).
E1101 (Pro+).
E1151 (Pro+).
Introduction .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
31
17
14
14
14
14
15
15
15
15
16
16
16
16
16
16
17
17
17
17
17
12
GOT series operator terminals
Dimensions . . . . . . . . . . . . . . . . . . 25
F920GOT-BBD. . . . . . . . . . . . . . . . . . 8
F930GOT-BBD. . . . . . . . . . . . . . . . . . 8
F930GOT-BWD-E . . . . . . . . . . . . . . . . 8
F940GOT-LBD-H-E . . . . . . . . . . . . . . 11
F940GOT-LBD-RH-E . . . . . . . . . . . . . 11
F940GOT-LWD-E . . . . . . . . . . . . . . . . 8
F940GOT-SBD-H-E . . . . . . . . . . . . . . 11
F940GOT-SBD-RH-E . . . . . . . . . . . . . 11
F940GOT-SWD-E . . . . . . . . . . . . . . . . 8
F940WGOT-TWD-E . . . . . . . . . . . . . . 8
F943GOT-LBD-H-E . . . . . . . . . . . . . . 11
F943GOT-LBD-RH-E . . . . . . . . . . . . . 11
F943GOT-SBD-H-E . . . . . . . . . . . . . . 11
F943GOT-SBD-RH-E . . . . . . . . . . . . . 11
GT1020 . . . . . . . . . . . . . . . . . . . . . . 9
GT1150-QLBD. . . . . . . . . . . . . . . . . . 9
GT1150HS-QLBD . . . . . . . . . . . . . . . . 9
GT1155-QSBD. . . . . . . . . . . . . . . . . . 9
GT1155HS-QSBD . . . . . . . . . . . . . . . . 9
GT1550-QLBD. . . . . . . . . . . . . . . . . . 9
GT1555-QSBD. . . . . . . . . . . . . . . . . . 9
GT1555-QTBD. . . . . . . . . . . . . . . . . . 9
GT1562-VNBA . . . . . . . . . . . . . . . . . 10
GT1562-VNBD. . . . . . . . . . . . . . . . . 10
GT1565-VTBA . . . . . . . . . . . . . . . . . 10
GT1565-VTBD . . . . . . . . . . . . . . . . . 10
GT1572-VNBA . . . . . . . . . . . . . . . . . 10
GT1572-VNBD. . . . . . . . . . . . . . . . . 10
GT1575-STBA . . . . . . . . . . . . . . . . . 10
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
10
10
10
10
10
10
10
10
10
10
10
.6
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
40
18
18
18
18
Industrial PCs
Dimensions .
IPC-MC1121 .
IPC-MC1151 .
IPC-VP1151 .
IPC-VP1171 .
.
.
.
.
.
.
.
.
.
.
Interface adapters for GT15
GT15-75ABUS2SL. .
GT15-75ABUSSL . .
GT15-75J61 BT13-Z
GT15-75J71 BR13-Z
GT15-75J71 LP23-Z
GT15-75QBUS2SL .
GT15-75QBUSSL . .
GT15-ABUS . . . . .
GT15-ABUS2 . . . . .
GT15-J61BT13. . . .
GT15-J71E71-100. .
GT15-PRN . . . . . .
GT15-QBUS . . . . .
GT15-QBUS2. . . . .
GT15-RS2-9P. . . . .
GT15-RS2T4-25P . .
GT15-RS2T4-9P . . .
GT15-RS4-9S. . . . .
GT15-RS4-TS. . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
19
19
19
19
19
19
Option cards
GT15-FNB . . . .
GT15-MESB48M.
GT15-QFNB . . .
GT15-QFNB16M
GT15-QFNB32M
GT15-QFNB48M
.
.
.
.
.
.
.
.
.
.
.
.
Overviews
Cables . . . . . . . . . . . . . . . . . . . . . . 20
E series . . . . . . . . . . . . . . . . . . . . . 12
General . . . . . . . . . . . . . . . . . . . . . . 4
GOT series . . . . . . . . . . . . . . . . . . . . 6
Networks. . . . . . . . . . . . . . . . . . . . . 5
Vision 1000 product range . . . . . . . . . 4
Software
E-Designer . . . . . . . . . . . . . . . . . . . 44
GT Works2 . . . . . . . . . . . . . . . . . . . 43
MX4 HMI . . . . . . . . . . . . . . . . . . . . 42
47
MITSUBISHI ELECTRIC
HMI-Catalogue 2007 UK25-47.prn
HMI-Catalogue 2007 UK
Mittwoch, 30. Mai 2007 11:09:05
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
GT1575-STBD . .
GT1575-VNBA . .
GT1575-VNBD. .
GT1575-VTBA . .
GT1575-VTBD . .
GT1575V-STBD .
GT1585-STBA . .
GT1585-STBD . .
GT1585V-STBD .
GT1595-XTBA . .
GT1595-XTBD . .
Introduction. . .
47
Robots
In fact some HMIs have the ability to report
errors remotely, even contacting the maintenance team before the line operators are
aware there is a problem. The potential of
visualisation tools to improve process
“uptime” is enormous.
Servo amplifiers
Enterprise PC
(MES/ERP/SCADA)
Motion control and servos
Inverters
LV circuit protection
Remote I/Os
Pressure
storage tank
Transport
conveyor (OUT)
Filling tubes
Rotational
conveyor
Transport
conveyor (IN)
Frequency Inverter
PLC
Local HMI, plant
wide information
HMI technology can easily consolidate information at one point.
Laser machines
Fast data retrieval, greater transparency
require simplier and more effiecient control architectures. Because of this the
demand for high reliability SCADA and PC
based solutions is critical especially when
feeding data in to a businesses central MES
and ERP systems. But even now it is possible to see a future trend for embeding
direct MES functionality in to PLC stations
and high function HMIs. This can provide
huge gains for the manufacturer, i.e.;
reducing system complexity by removing a
layer of intermedary PCs; increased data
security by providing quicker respose and
industrialised hardware; localised control
points giving increased access to vital information.
CNC
controllers
HMI and GOTs
EDM machines
Micro PLCs
The use of HMI technology has been
increasing as manufacturers increasingly
demand information in realtime. The
boundries between “shop floor” data and
business operation/process data is fast
becoming blurred and places higher
demands on visualisation and data processing tools to span the wide range of
“new” applications.
Using visualisation tools to support maintenance has never been high on the
agenda of machine and process engineers,
but if system downtime is considered as
one of the most costly problems manufacturers face, then why not? HMI screen’s can
be configured to easily report on all of the
critical control aspects of a system aiding
efficient problem diagnosis.
14
Modular PLCs
As a manufacturer and supplier of automation products Mitsubishi Electric has long
recognised these key issues and has developed solutions for its own complex production needs. This has resulted in many
innovations such as GOT displays that have
“built in” maintetance screens as well as the
ability to review and monitor PLC programs. Other advances include MES interfaces for direct connection of PLC and HMI
technology to MES SQL databases.
Mitsubishi’s Vision1000 visualisation solutions are a clear part of today’s [email protected]
helping manufacturers increase productivity in a scalable and reliable way.
Mitsubishi offer a wide range of automation equipment from PLCs and HMIs to CNC and EDM machines
Since its beginnings in 1870, some 45 companies use the Mitsubishi name, covering a
spectrum of finance, commerce and industry.
The Mitsubishi brand name is recognized
around the world as a symbol of premium
quality.
Mitsubishi Electric Corporation represents
space development, transportation, semiconductors, energy systems, communications and information processing, audio
visual equipment, home electronics, building and energy management and automation systems, and has 237 factories and
laboratories worldwide in over 121 countries.
This is why you can rely on a Mitsubishi
automation solution – because we know
first hand about the need for reliable, efficient, easy-to-use automation and control.
As one of the world’s leading companies
with a global turnover of 3.4 trillion Yen
(approximately $30.8 billion), employing
over 100,000 people, Mitsubishi Electric
has the resource and the commitment to
deliver the ultimate in service and support
as well as the best products.
15
MITSUBISHI
ELECTRIC
Global partner. Local friend.
FACTORY AUTOMATION
HMI
Visualisation Tools
EUROPEAN BRANCHES
EUROPEAN REPRESENTATIVES
MITSUBISHI ELECTRIC EUROPE B.V.
FRANCE
25,Boulevard des Bouvets
F-92741 Nanterre Cedex
Phone +33 (0)1 / 55 68 55 68
MITSUBISHI ELECTRIC EUROPE B.V.
GERMANY
Gothaer Straße 8
D-40880 Ratingen
Phone +49 (0) 21 02/4 86-0
MITSUBISHI ELECTRIC EUROPE B.V.
IRELAND
Westgate Business Park,Ballymount
IRL-Dublin 24
Phone +353 (0)1 4198800
MITSUBISHI ELECTRIC EUROPE B.V.
ITALY
Viale Colleoni 7
I-20041 Agrate Brianza (MI)
Phone +39 039 / 60 53 1
MITSUBISHI ELECTRIC EUROPE B.V.
SPAIN
Carretera de Rubi 76-80
E-08190 Sant Cugat del Vallés (Barcelona)
Phone +34 93 / 565 3131
MITSUBISHI ELECTRIC EUROPE B.V.
UK
Travellers Lane
UK-Hatfield Herts. AL10 8 XB
Phone +44 (0)1707 / 27 61 00
GEVA
AUSTRIA
Wiener Straße 89
AT-2500 Baden
Phone:+43 (0)2252 / 85 55 20
TEHNIKON
BELARUS
Oktyabrskaya 16/5,Off.704
BY-220030 Minsk
Phone:+375 (0)17 / 210 46 26
Koning & Hartman b.v.
BELGIUM
Woluwelaan 31
BE-1800 Vilvoorde
Phone:+32 (0)2 / 257 02 40
AKHNATON
BULGARIA
4 Andrej Ljapchev Blvd.Pb 21
BG-1756 Sofia
Phone:+359 (0)2 / 97 44 05 8
INEA CR d.o.o.
CROATIA
Losinjska 4 a
HR-10000 Zagreb
Phone:+385 (0)1 / 36 940 - 01/ -02/ -03
AutoCont CS s.r.o. CZECH REPUBLIC
Jelinkova 59/3
CZ-721 00 Ostrava Svinov
Phone:+420 (0)59 / 5691 150
MITSUBISHI
ELECTRIC
FACTORY AUTOMATION
B:TECH A.S.
CZECH REPUBLIC
Na Ostrove 84
CZ-58001 Havlickuv Brod
Phone:+420 (0)569 / 408 841
Beijer Electronics A/S
DENMARK
Lautruphoj 1-3
DK-2750 Ballerup
Phone:+45 (0)70 / 26 46 46
Beijer Electronics Eesti OÜ ESTONIA
Pärnu mnt.160i
EE-11317 Tallinn
Phone:+372 (0)6 / 51 81 40
Beijer Electronics OY
FINLAND
Jaakonkatu 2
FIN-01620 Vantaa
Phone:+358 (0)207 / 463 500
UTECO A.B.E.E.
GREECE
5,Mavrogenous Str.
GR-18542 Piraeus
Phone:+30 211 / 1206 900
Meltrade Ltd.
HUNGARY
Fertõ utca 14.
HU-1107 Budapest
Phone:+36 (0)1 / 431-9726
Ilan & Gavish Ltd.
ISRAEL
24 Shenkar St.,Kiryat Arie
IL-49001 Petah-Tiqva
Phone:+972 (0)3 / 922 18 24
Kazpromautomatics Ltd. KAZAKHSTAN
2,Scladskaya str.
KAZ-470046 Karaganda
Phone:+7 3212 / 50 11 50
Beijer Electronics SIA
LATVIA
Vestienas iela 2
LV-1035 Riga
Phone:+371 (0)784 / 2280
Beijer Electronics UAB LITHUANIA
Savanoriu Pr.187
LT-02300 Vilnius
Phone:+370 (0)5 / 232 3101
Intehsis SRL
MOLDOVA
bld.Traian 23/1
MD-2060 Kishinev
Phone:+373 (0)22 / 66 4242
Koning & Hartman b.v. NETHERLANDS
Haarlerbergweg 21-23
NL-1101 CH Amsterdam
Phone:+31 (0)20 / 587 76 00
Beijer Electronics A/S
NORWAY
Postboks 487
NO-3002 Drammen
Phone:+47 (0)32 / 24 30 00
MPL Technology Sp.z o.o. POLAND
Ul.Krakowska 50
PL-32-083 Balice
Phone:+48 (0)12 / 630 47 00
Sirius Trading & Services ROMANIA
Str.Biharia nr.67-77
RO-013981 Bucuresti 1
Phone:+40 (0)21 / 201 1147
ELEKTROSTILY
RUSSIA
Rubzowskaja nab.4-3,No.8
RU-105082 Moscow
Phone:+7 495 / 545 3419
ICOS
RUSSIA
Ryazanskij Prospekt,8A,Office 100
RU-109428 Moscow
Phone:+7 495 / 232 0207
NPP “URALELEKTRA”
RUSSIA
Sverdlova 11A
RU-620027 Ekaterinburg
Phone:+7 343 / 353 2745
Craft Co.& Engineering d.o.o. SERBIA
Toplicina str.4 lok 6
SER-1800 Nis
Phone:+381(0)18/292-24-4/5,523962
Inea SR d.o.o.
SERBIA
Karadjordjeva 12/260
SER-113000 Smederevo
Phone:+381 (0)26 / 617 163
AutoCont Control s.r.o.
SLOVAKIA
Radlinského 47
SK-02601 Dolný Kubín
Phone:+421 (0)43 / 5868 210
CS Mtrade Slovensko s.r.o. SLOVAKIA
Vajanskeho 58
SK-92101 Piestany
Phone:+421 (0)33 / 7742 760
INEA d.o.o.
SLOVENIA
Stegne 11
SI-1000 Ljubljana
Phone:+386 (0)1 / 513 8100
Beijer Electronics AB
SWEDEN
Box 426
S-20124 Malmö
Phone:+46 (0)40 / 35 86 00
Econotec AG
SWITZERLAND
Hinterdorfstr.12
CH-8309 Nürensdorf
Phone:+41 (0)44 / 838 48 11
GTS
TURKEY
Darulaceze Cad.No.43 KAT.2
TR-34384 Okmeydani-Istanbul
Phone:+90 (0)212 / 320 1640
CSC Automation Ltd.
UKRAINE
15,M.Raskova St.,Fl.10,Office 1010
UA-02002 Kiev
Phone:+380 (0)44 / 494 33 55
CBI Ltd.
SOUTH AFRICA
Private Bag 2016
ZA-1600 Isando
Phone:+ 27 (0)11 / 928 2000
Mitsubishi Electric Europe B.V. /// FA - European Business Group /// Gothaer Straße 8 /// D-40880 Ratingen /// Germany
Tel.: +49(0)2102-4860 /// Fax: +49(0)2102-4861120 /// [email protected] /// www.mitsubishi-automation.com
Specifications subject to change /// Art. no. 207075-A /// 05.2007
All trademarks and copyrights acknowledged.
System and Process Visualisation /// Touch Screen and Key Operation ///
Powerful Maintenance Tools /// PLC Program Display /// Direct MES
Integration /// HMIs /// GOTs /// IPCs /// SCADA /// Software ///
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement