ZC-BT/BX 8000SERIES
PART DESCRIPTION
CONNECTING the cables
Connect the power and video cables
Connect the video cable from the monitor and the coaxial video cable attached to
the camera body
Lens Specification
ZC-BT series
9
4
14
Focal Length
13
3~9mm
In case of using DC 12V, connect DC jack from camera with power supply
(CLASS 2 ONLY) If necessary, after connecting DC jack from Camera
to “ Additional power connector(Accessory)” connect it with power supply.
3.3~12mm
1
☞Attention
Be sure to check that the cables are connected correctly before turning on
the power.
Turning on the power when the cables are connected with incorrect polarity
may damage the camera .
Aperture
Digital
1:1.2~2.1
2
6
5
3
7
8
10
11
IR LED
Photo Sensor
Front Cover
Sunshield
Focus Adjustment Lever
View Angle Adjustment Lever
Multi Tact Switch for OSD control
True
True
12
ZC-BT/BX 8000SERIES
Camera Models
View Angle
90~31.8
1:1.4~2.4
1:1.4~2.9
89.8~23.9
1:1.4~1.6
32.1~13.1
NTSC
PAL
ZC-BT/BX8039NXA
ZC-BT/BX8039PXA
ZC-BNT/BNX8039NXA
ZC-BNT/BNX8039PXA
ZC-BT/BX8312NXA
ZC-BT/BX8312PXA
ZC-BNT/BNX8312NXA
ZC-BNT/BNX8312PXA
ZC-BT/BX8922NXA
ZC-BT/BX8922PXA
ZC-BNT/BNX8922NXA
ZC-BNT/BNX8922PXA
INSTRUCTION MANUAL
* Optional Heater models : suffix “-H” to the above model names(such as ZC-BT8039PXA-H)
* Unscrew the Front Cover counter-clockwise to open the unit for adjustments. Once
adjusted, screw the Front Cover back and tighten it clockwise, and refrain from opening
and closing frequently to ensure the best water-proof and condensation free performance.
1.
2.
3.
4.
5.
6.
7.
Digital
Digital
9~22mm
650mA±10%
500mA±10%
D/N
True
In case of using AC 24V, after connecting DC jack from camera to
“Additional power connector(accessory)” connect it with power supply
(CLASS ONLY 2)
☞Attention
Specification below is recommended as an Output rated capacity of Power supply
that is connected to camera
OUTDOOR COLOR CAMERA
MODELS
8. Sync System Slide Switch
9. Service Jack Socket
10. Locking Ring(body)
11. Locking Ring(bracket)
12. Mounting Base
13. Video Output Connector
14. Power Input Jack
* Option
1. Service Monitor cable
2. Heater
3. Lens variations
(Please contact your dealers for more details)
PRODUCT FEATURES
-. 1/3” SONY EXview HAD-II CCD
-. Built-in “COMPUTAR ” Vari-Focal Lens
-. True or Digital Day & Night
-. Auto-sensing DC12V/AC24V Dual-Voltage Operation
-. Digital WDR(Wide Dynamic Range)
-. Back Light Compensation
-. High Light Compensation
-. Motion Detection
-. Privacy Masking
-. 2D Digital Noise Reduction (2DNR)
-. IR Optimizer
-. Low Power Consumption
-. Multi Tact Switch for OSD control
-. Slide Switch for Sync. System selection
700TVL High Resolution
Color / Day & Night
Edit : ZC-BTX8000_-700-X-DUAL V_150612_V1
Thank you for your purchase of this product. Before operating the product, please read this instruction manual
carefully to ensure proper use of the product. Please store this instruction manual in a safe place for future
reference.
English
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is attached to a product it means the products covered by the European
Directive 2002/96/EC. 2. All electrical and electronic products should be disposed of separately from the municipal waste
stream via designated collection facilities appointed by the government or the local authorities. 3. The correct disposal of
your old appliance will help prevent potential negative consequences for the environment and human health. 4. For more
detailed information
About disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product.
Français/French
Élimination de votre ancien appareil
1. Ce symbole, représentant une poubelle sur roulettes barrée d'une croix, signifie que le produit est couvert par la directive européenne
2002/96/EC. 2. Tous les produits électriques et électroniques doivent être éliminés séparément de la chaîne de collecte municipale des
ordures, par l’ intermédiaire des installations de collecte prescrites et désignées par le gouvernement ou les autorités locales. 3. Une
élimination conforme aux instructions aidera à réduire les conséquences negatives et risques éventuels pour ironnement et la santé
humaine. 4. Pour plus d'informations concernant l'élimination de votre ancien appareil, veuillez contacter votre mairie, le service des
ordures ménagères ou encore le magasin où vous avez acheté ce produit.
Deutsch/German
Entsorgung von Altgeräten
1. Wenn dieses Symbol eines durchgestrichenen Abfalleimers auf einem Produkt angebracht ist, unterliegt dieses Produkt der
europäischen Richtlinie 2002/96/EC. 2. Alle Elektro- und Elektronik-Altgeräte müssen getrennt vom Hausmüll über die dafür staatlich
vorgesehenen Stellen entsorgt werden. 3. Mit der ordnungsgemäßen Entsorgung des alten Geräts vermeiden Sie Umweltschäden und
eine Gefährdung der rsönlichen Gesundheit. 4. Weitere Informationen zur Entsorgung des alten Geräts erhalten Sie bei der Stadtverwaltung, beim Entsorgungsamt oder in dem Geschäft, wo Sie das Produkt erworben haben.
Italiano/Italian
RAEE: SMALTIMENTO DELLE VOSTRE VECCHIE APPARECCHIATURE
1. Quando il simbolo del “Cassonetto Barrato” è apposto su un prodotto, significa che lo stesso può ricadere nei termini previsti dalla
Direttiva Europea nr. 2002/96/EC in funzione dell’attuazione definita dalla Legislazione dei singoli stati membri dell’Unione Europea. 2.
Tutti i prodotti elettrici ed elettronici dovrebbero essere smaltiti separatamente dai rifiuti municipali, tramite appositi ontenitori, approvati
dall’Amministrazione Comunale o dalle Autorità Locali.
3. Il corretto smaltimento delle vostre vecchie apparecchiature, contribuirà a prevenire possibili conseguenze di impatto egativo sull’
ambiente e per la salute dell’uomo. 4. Per maggiori informazioni circa lo smaltimento delle vostre vecchie apparecchiature, siete pregati di
contattare l’ufficio municipale della vostra città, il servizio di smaltimento rifiuti o il punto vendita nel quale avete acquistato il prodotto.
Polski/Polish
Utylizacja starych urządzeń
1. Kiedy do produktu dołączony jest niniejszy przekreślony symbol kołowego pojemnika na śmieci, oznacza to, że produkt jest objęty
europejską dyrektywą 2002/96/EC. 2. Wszystkie elektryczne i elektroniczne produkty powinny być utylizowane niezależnie od odpadów
miejskich, zwykorzystaniem przeznaczonych do tego miejsc składowaniawskazanych przez rząd lub miejscowe władze. 3. Właściwy
sposób utylizacji starego urządzenia pomoże zapobiec potencjalnie negatywnemu wpływowi na zdrowie i środowisko. 4. Aby uzyskać
więcej informacji o sposobach utylizacji starych urządzeń, należy skontaktować się z władzami lokalnymi, przedsiębiorstwem zajmującym
się utylizacją odpadów lub sklepem, w którym produkt zostałkupiony.
Português/Portuguese
Eliminação do seu antigo aparelho
1. Quando este símbolo de latão cruzado estiver afixado a um produto, significa que o produto é abrangido pela Directiva Europeia
002/96/EC. 2. Todos os produtos eléctricos e electrónicos devem ser eliminados separadamente da coleta de lixo municipal através de
pontos de recolha designados, facilitados pelo governo ou autoridades locais. 3. A eliminação correcta do seu aparelho antigo ajuda a
evitar potenciais onsequências negativas para o ambiente e para a saúde humana. 4. Para obter informaçõs mais detalhadas acerca da
eliminação do seu aparelho antigo, contacte as autoridades locais, um service de eliminação de resíduos ou a loja onde comprou o
produto.
Español/Spanish
Cómo deshacerse de aparatos eléctricos y electrónicos viejos
1. Si en un producto aparece el símbolo de un contenedor de basura tachado, significa que éste se acoge a la Directiva 2002/96/EC.2.
Todos los aparatos eléctricos o electrónicos se deben desechar de forma distinta del servicio municipal de recogida de basura, a través
de puntos de recogida designados por el gobierno o las autoridades locales. 3. La correcta recogida y tratamiento de los dispositivos
inservibles contribuye a evitar riesgos potenciales para el medio ambiente y la salud pública. 4. Para obtener más información sobre
cómo deshacerse de sus aparatos eléctricos y electrónicos viejos, póngase en contacto con su ayuntamiento, el servicio de recogida de
basuras o el establecimiento donde adquirió el producto.
for PAL models
CBC Co.,Ltd
Tokyo, Japan
www.GANZ.jp
ZC-BX series
11
SPECIFICATION
10
4
TV System
NTSC
PAL
Image Sensor
Effective Elements
Scanning Frequency
Video Output
2
3
5
6
7
8
9
12
*Caution : ZC-BX housing is desinged to adjust focus and focal length externally. Once
Front Cover is unlocked for any reason, its outdoor performance can not be guaranteed.
1. IR LED
2. Photo Sensor
3. Front Cover
4. Sunshield
5. Exterior Focus Adjustment Screw
6. Exterior View Angle Adjustment Screw
7. Locking Ring (body)
8. Locking Ring (bracket)
9. Mounting Base
10. Video Output Connector
11. Power Input Jack
12. Multi Tact Switch for OSD control
* Option
1. Heater
2. Lens variations
(Please contact your dealers for more details)
1/3” Type Inter line transfer CCD(Sony EXview HAD II CCD)
976(H) x 494(V)
976(H) x 582(V)
15.734kHz(H) x 59.94Hz(V)
15.625kHz(H) x 50.00Hz(V)
1.0Vp-p/75Ω
Horizontal Resolution
Minimum Ilumination
The installation should be made by a qualified service person and should conform to all local codes.
2 : 1 Interlace
Scanning System
1
700 TVL
0lx (B/W Mode/LED On)
Day/Night
Digital or True Day/ Night
S/N Ratio
More than 50dB(at minimum AGC gain)
0.45
Gamma Characteristic
Sync. System
ZC-BT Series
ZC-BX Series
Electronic Shutter
White Balance
Power Supply
Power Consumption
Internal, Line Lock(Selectable)
Internal only
1/60 sec, FLK,
1/60 ~1/100,000(Selectable)
1/50 sec, FLK,
1/50 ~1/100,000(Selectable)
ATW, PUSH, USER1, USER2, ANT CR, MANUAL, PUSH LOCK (Selectable)
AC24V±10% 60Hz±1Hz,
DC12V±10%
AC24V±10% 50Hz±1Hz,
DC12V±10%
6.5Watt (AC24V), 6.5 Watt (DC12V)
Ambient Temperature
Operation : -20°C to +50°C / Storage : -20°C to +60°C
Ambient Humidity
Operation : Max. 85%RH / Storage : Max. 95%RH
External Dimensions
209mm(L) X 72Ф (not included sun shield)
Weight
Approx. 750g(Included sun shield)
Switch
ZC-BT Series
ZC-BX Series
Accessories
SAFETY PRECAUTIONS
Multi Tact Switch for OSD control,
Slide Switch for Sync. System selection(for BT models only)
Multi Tact Switch for OSD control
Self-tapping Screw : 3ea, Template : 1ea,
Instruction Manual : 1ea, Additional Power Connector: 1ea
※The specifications and/or appearance of the product may change without a prior notice
WARNING
This symbol indicates that there is a possibility of death or damage to operator or others.
To prevent fire or electric shock, do not expose this product to rain or moisture.
Attention
This symbol indicates that there is a possibility of injury or damage to equipment.
(1) Use only AC24V power suppy marked class 2 or +DC12V regulated power supply marked class 2.
(2) To prevent fire of electrical shock, UL listed class 2 wiring should be used for the DC12V or AC24V input terminal.
(3) Be sure to connect each lead to the appropriate terminal, wrong connection may cause malfunction and/or
damage to the camera.
(4) Do not attempt to aim the camera at the sun or other extremely bright objects that cause smear to appear
irrespective of whether the camera is operating or not. This can damage the CCD(Charge Coupled Device).
(5) Do not place the camera in the following location.
1) Locations subject to extremely high or low temperature.
(Operating temperature range : -20'C to +50'C {-4'F to 122'F}
(Storage temperature range : -20'C to +60'C{-4'F to 140'F})
2) Locations where there are large amounts of water vapor and steam.
(6) Ensure the location selected near equipment that emits a strong electromagnetic field, some irregularity such as
noise on the monitor screen may happen.
(7) When this camera is installed near equipment that emits a strong electromagnetic field, some irregularity such
as noise on the monitor screen may happen.
(8) Be sure to use screws suitable for the type of material to which the camera is being mounted.
(9) Do not allow the camera to be subjected to strong impacts or shocks. The camera could be damaged by improper
handling or storage.
(10) Never attempt to disassemble or modify the camera.
(11) If an abnormality should occur, immediately turn off the power and consult your dealer.
This device complies with Part 15 of the FCC Rules, Operation is subject to the following two conditions:(1)This
device may not cause harmful interference, and (2)This device must accept any interference received, including
interference that may cause undesired operation.
(for NTSC models)
The CE Marking is a Directive Conformity mark of the European Union(EU)
(for PAL models)
INSTALLATION
Attaching to the ceiling
ADJUSTMENT
Attaching to the wall
* START SET UP MENU
1. Direction and Lens
1st Page OSD
Press the Middle Multi Tact Switch, the main setup menu is displayed on the monitor
screen
Adjusting the camera direction
This camera can be adjusted easily for
viewing in all directions.
After attaching the camera on the wall or
ceiling, adjust camera for the desired
direction.
Then tighten each locking ring and lock
rings with allen wrench as shown in
pircture.
SETUP MENU
Select the function
by using the switch
Up
Down
LENS
AUTO
SHUTTER/AGC
AUTO
WHITE BAL
ATW
BACKLIGHT
OFF
PIC ADJUST
ATR
OFF
MOTION DET
OFF
NEXT
EXIT
SAVE ALL
* A function with the icon
has sub menus.
To select a sub menu,
select a function with
the icon and press
the switch
Enter
4) BACKLIGHT 5) PICTURE ADJUST 6) ATR(D-WDR)
SETUP MENU
SETUP
LENS
AUTO
SHUTTER/AGC
AUTO
WHITE BAL
ATW
BACKLIGHT
OFF
PIC ADJUST
ATR
OFF
MOTION DET
OFF
NEXT
EXIT
SAVE ALL
MIRRO
BLC-HLC
OFF - ON
BRIGHTNESS
CONTRAST
000 ~ 255
000 ~ 255
SHARPNESS
HUE
GAIN
000 ~ 255
000 ~ 255
000 ~ 255
ON
LUMINANCE
MID-HIGH-LOW
CONTRAST
MID-HIGH-LOW
7) MOTION DETECTION
SETUP MENU
Adjusting the view angle and focus
For ZC-BT series
BT
1) Move the lever to adjust focus and
zoom after taking off the Front Cover
2) Tuurn focus and zoom levers in clock
wise direction to fix the poositions
* Attaching to the ceiling or wall
This section explains how to install the unit where cables are running through the
interior of the ceiling or wall.
1.Drilling holes in the ceiling or wall:
Use the template included to mark out the position on the ceiling or wall where you
want to install the unit.
BX
For ZC-BXseries
Turn the exterior Focs and Angle of
viewing Screw to make adjust by screwdriver.
2.When running cables through the interior of the ceiling or wall :
Use the template, and drill three holes for screws used to attach the camera body and
one hole for the cables (Cables).
1) LENS
Turn the Switch toward Left or Right side, Select AUTO or MANUAL
AUTO
SETUP MENU
SETUP
LENS
AUTO
SHUTTER/AGC
AUTO
WHITE BAL
ATW
BACKLIGHT
OFF
PIC ADJUST
ATR
OFF
MOTION DET
OFF
NEXT
EXIT
SAVE ALL
Left
Right
SETUP
LENS
AUTO
SHUTTER/AGC
AUTO
WHITE BAL
ATW
BACKLIGHT
OFF
PIC ADJUST
ATR
OFF
MOTION DET
OFF
NEXT
EXIT
SAVE ALL
MOTION DET
DETECT SENSE
BLOCK DISP
MONITOR AREA
AREA SEL
TOP
BOTTOM
LEFT
RIGHT
ON
000 ~ 127
ON OFF
OFF
ON
1/4 ~ 4/4
000 ~ 244
000 ~ 244
000 ~ 474
000 ~ 474
ENABLE
AUTO IRIS
TYPE
DC
AUTO OPEN
000 ~ 255
MODE
SPEED
CLOSE
MANUAL
8) PRIVACY MASKING
PRIVACY
SETUP MENU
* Simply make the adjustment in the following order to help
make the focusing easier:
- Select MANUAL
- Adjust lens focus well
- Then return to AUTO
2nd Page OSD
SETUP
OFF
AUTO
PRIVACY
DAY/NIGHT
NR
CAMERA ID
OFF
SYNC
INT
LANGUAGE
ENGLISH
CAMERA RESET
BACK
EXIT
SAVE ALL
AREA SEL
TOP
BOTTOM
LEFT
RIGHT
COLOR
TRNSP
MOSAIC
ON
1/8 ~ 8/8
000 ~ 244
000 ~ 244
000 ~ 474
000 ~ 474
1 ~8
1.00 ~ 0.00
ON OFF
Attention When MOTION DEC ON,
only 4 AREAS available.
2. Switches
Use the Slide Switch within the camerra
2) SHUTTER/AGC
9) DAY/NIGHT
Attention For regular Auto-Iris use, ensure to set "AUTO IRIS" (Not "SHUT+AUTO IRIS)
* BT Series
EXT2
AUTO
in this “SHUTTER/AGC" OSD menu
Slide Switch for Sync. System
Multitack Switch for OSD
Enter
Up
Left
INT
Right
L-L
* L-L : Line Lock
* INT : Internal
Down
SETUP MENU
SETUP MENU
SETUP
LENS
AUTO
SHUTTER/AGC
AUTO
WHITE BAL
ATW
BACKLIGHT
OFF
PIC ADJUST
ATR
OFF
MOTION DET
OFF
NEXT
EXIT
SAVE ALL
AUTO
MANUAL
HIGH LUMINANCE
SHUT + AUTO IRIS
MODE
AUTO IRIS
BRIGHTNESS
000 ~ 255
LOW LUMINANCE
MODE
AGC
BRIGHTNESS
x0.25 ~ x1.00
MODE
SHUTTER
AGC
OFF
SHUT+AGC
1/50 ~ 1/10000 *Flickerless
NTSC :1/100
6.00 ~ 44.80
PAL : 1/120
SETUP
PRIVACY
OFF
DAY/NIGHT
EXT1
NR
CAMERA ID
OFF
SYNC
INT
LANGUAGE
ENGLISH
CAMERA RESET
BACK
EXIT
SAVE ALL
SHUTTER 1/100(NTSC) 1/120(PAL)
BURST
ON OFF
000 ~ 255
000 ~ 255
000 ~ 255
DELAY CNT
DAY->NIGHT
NIGHT->DAY
COLOR
B/W
B/W
BURST
ON
OFF
IR OPTIMIZER
OFF
ON
MODE AUTO - CENTER
LEVEL
000~031
* IR OPTIMIZER : It minimizes overexposure
when an infrared LED light source is used
Attention BRIGHTNESS adjusts DC level of the lens
Attention "Flickerless" function can be available by SHUTTER/AGC
* BX Series
DAY/NIGHT
WARNING DAY/NIGHT uses EX1 not AUTO for regular applications
MANUAL
return to "AUTO" to fix the setting
Do not set the above EX2
Up
Left
Right
3) WHITE BALANCE
10)NR 11)CAMERA ID 12)SYNC 13)LANGUAGE 14)RESET
ATW
Down
* Special instruction
To ensure the best low light performance, this camera has IR LED device to change
automatically to night mode when the environment gets dark. If the high light source
or some object reflecting very bring light is placed within 1m from the installed camera,
it interferes with IR LED performance so that Day & Night function may not perform well.
Ensure that the field conditions are suitable before installing the camera unit.
3. OSD Menu
OSD MENU FUNCTION
LENS
AUTO
MANUAL
SHUTTER/AGC
WHITE BAL
AUTO
MANUAL
ATW PUSH USER1 USER2 ANTI CR MANUAL PUSH LOCK
BACKLIGHT
OFF
BLC
HLC
PICT ADJUST
ATR
MOTION
PRIVACY
MIRRO BRIGHTNESS CONTRAST SHARPNESS HUE GAIN
DAY/NIGHT
EXT1 EXT2 AUTO COLOR B/W
NR
EXIT
CAMERA ID
OFF ON
LANGUAGE
SETUP
LENS
AUTO
SHUTTER/AGC
AUTO
WHITE BAL
ATW
BACKLIGHT
OFF
PIC ADJUST
ATR
OFF
MOTION DET
OFF
NEXT
EXIT
SAVE ALL
PUSH
USER1
USER2
B-GAIN
R-GAIN
000 ~ 255
000 ~ 255
B-GAIN
R-GAIN
000 ~ 255
000 ~ 255
ANTI CR(ANTI COLOR ROLLING)
MANUAL
PUSH LOCK
OFF ON
OFF ON
SYNC
SETUP MENU
SPEED
000~ 255
DELAY CNT
000~ 255
AGC
x0.50~ x2.00
INDOOR
ENVIRONMENT OUTDOOR
LEVEL
SETUP MENU
Y/C
NR MODE
Y LEVEL
C LEVEL
SETUP
OFF
AUTO
PRIVACY
DAY/NIGHT
NR
CAMERA ID
OFF
SYNC
INT
LANGUAGE
ENGLISH
CAMERA RESET
BACK
EXIT
SAVE ALL
OFF
Y
C
000 ~ 15
000 ~ 15
* NR : DIGITAL NOISE REDUCTION
* Y LEVEL : B/W SIGNAL LEVEL
* C LEVEL ; COLOR SIGNAL LEVEL
ON
* OSD automatically reflects Power and Sync Switch positon to be set as:
Power
DC 12V
AC 24V
Sync Switch
Sync
INT
INT
LL
INT
INT
INT
LL
LL
* INT: Internal Sync
* LL : Line Lock
019 ~ 078
Japanese German French Russian
Portuguese Spanish Chinese
* Return to Factory Setting
CAMERA RESET
CBC Co.,Ltd
Tokyo, Japan
www.GANZ.jp
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement