Bosch ZX4 loudspeaker Datasheet
Advertisement
Advertisement
PRO SOUND
Loudspeakers and Electronics
2
A
At Electro-Voice, we Live for Sound. For more than 85 years, we have designed and engineered leading-edge sound reinforcement solutions that empower the performer, exceed the expectations of the audio professional and elevate the audience experience.
CONTENTS
X-Line 4
XLC 6
XLCi 7
XLVC 8
Xi Series
EVF Front-Loaded Systems
EVF Front-Loaded Subwoofers
EVH Horn-Loaded Systems
10
12
16
18
EVA Expandable Vertical Array
EVA Subwoofers
EVU Ultracompact Systems
EVI Variable Intensity Loudspeakers Systems
EVID Surface-Mount Systems
EVID In-Wall Speaker Systems
EVID Ceiling Speaker Systems
Specialty Loudspeakers
26
27
28
30
20
21
22
24
Monitors 31
ZX/ZXA 32
EVM12L Guitar Speakers 35
SX 36
QRx 38
Tour X 40
ETX Powered Loudspeakers
Live X
42
44
ZLX 46
Rigging and Accessories 48
Tour Grade Amplifiers
Q Series Amplifiers
54
56
CPS Contractor Precision Series Amplifiers
CP Compact Precision Amplifiers
58
61
PA Series Commercial Power Amplifiers 62
Netmax 64
Sound System Processors 66
3
X-Line
4
X-Line is a concert sound loudspeaker system that combines high-level sonic impact and vocal intelligibility with the uniform, predictable coverage that only a line array can deliver. The X-Line system provides wide horizontal dispersion from a single vertical line array with exceptionally coherent wave-front summation in the vertical plane. Extended low-frequency polar control produces more uniform power response, further enhancing overall intelligibility.
The two full-range boxes in the line are three-way systems that incorporate the Electro-Voice Hydra timesynchronized, high-frequency plane wave generator to provide excellent summing in the far field. They also employ
Ring-Mode Decoupling (RMD) to provide level-independent fidelity, greater mid-bass clarity and high-frequency accuracy. All models in the line share the same footprint and are connected by proprietary rigging that facilitates rapid venue load-in and load-out.
Xvls THREE-WAY LONG-THROW ELEMENT
• High-output, three-way line array system
• Rectangular cabinet design
• 90° horizontal coverage pattern ideal for long-throw applications
• EV Hydra time-synchronized vertical plane-wave generator provides excellent far-field summing
• Ring-Mode Decoupling (RMD) provides level-independent fidelity, greater mid-bass clarity and high-frequency accuracy
• Proprietary rigging allows for rapid venue load-in and load-out
Xvlt THREE-WAY MEDIUM-THROW ELEMENT
• High-output, three-way line array system
• Five-degree trapezoidal cabinet design for lower "J" section of linear array
• 120° coverage typical for medium-throw assignment
• EV Hydra time-synchronized vertical plane-wave generator provides excellent far-field summing
• Ring-Mode Decoupling (RMD) provides level-independent fidelity, greater mid-bass clarity and high-frequency accuracy
• Proprietary rigging allows for rapid venue load-in and load-out
Xsub(F) DUAL 18" SUBWOOFER ELEMENT
• High-output, line array subwoofer system
• Rectangular cabinet with footprint identical to other X-Line systems
• Can be flown or ground-stacked. Also available in non-flying version
• Proprietary rigging allows for rapid venue load-in and load-out
Frequency Response (-3 dB)
Frequency Range (-10 dB)
Horizontal Coverage
Vertical Coverage*
LF Power Handling 1
MB Power Handling 2
HF Power Handling 3
Sensitivity* LF/MB/HF
Max. SPL* (calc., peak), LF/MB/HF
Peak SPL @ 10m**
LF Transducer
MB Transducer
HF Transducer
Connectors
Enclosure Material
Grille
Environmental Specs
Dimensions (H (front/rear) x W x D)*
Net Weight*
*Single Box @ 1 Meter
**4 Box Array @ 10 Meters
1 50-200 Hz
2 300-2000 Hz
3 1200-8000 Hz
4 50-100 Hz
Xvls
50 Hz – 16 kHz
30 Hz – 17 kHz
90°
5°
1200 W continuous, 4800 W peak
600 W continuous, 2400 W peak
225 W continuous, 900 W peak
98/108/114 dB
134/142/144 dB
135 dB
Two 15" EVX-155PL
Two 8" ND08
Three 3" ND6-16
2 Neutrik NL8
Birch plywood, textured epoxy paint
Powder-coated steel
IEC 529 IP24, MIL STD 810
19.46"/19.46" x 49" x 29.15"
(494.3/494.3 x 1244.6 x 740.4 mm)
257 lb (117 kg)
Xvlt
50 Hz – 16 kHz
30 Hz – 17 kHz
120°
8°
1200 W continuous, 4800 W peak
600 W continuous, 2400 W peak
225 W continuous, 900 W peak
97/107/114 dB
133/141/144 dB
135 dB
Two 15" EVX-155PL
Two 8" ND08
Three 3" ND6-16
2 Neutrik NL8
Birch plywood, textured epoxy paint
Powder-coated steel
IEC 529 IP24, MIL STD 810
19.46"/16.92" x 49" x 29.15"
(494.3/429.7 x 1244.6 x 740.4 mm)
253 lb (115 kg)
Xsub(F)
40–400 Hz
35–500 Hz
1200 W continuous, 4800 W peak 4
104 dB (half space)
141 dB (half space)
132 dB (half space)
Two 18" EVX-180B
2 Neutrik NL8
Birch plywood, textured epoxy paint
Powder-coated steel
IEC 529 IP24, MIL STD 810
19.46"/19.46" x 49" x 29.15"
(494.3/494.3 x 1244.6 x 740.4 mm)
202 lb (92 kg)
5
Whether at a medium-sized festival, in a large concert hall or house of worship, or as a supplementary system used with X-Line, XLC compact line arrays have a proven record of performance and reliability. It's no wonder that XLC is one of the most popular line array systems in the world. All modules incorporate Quik-Rig hardware for fast set-up and tear-down.
XLC127DVX
XLC907DVX
120° HORIZONTAL THREE-WAY COMPACT LINE ARRAY ELEMENT
90° HORIZONTAL THREE-WAY COMPACT LINE ARRAY ELEMENT
• Accurate vertical control and coverage
• Compact, lightweight modules
• True three-way design
• Triamp operation; biamp operation with optional mid-high crossover (XLC127DVX only)
• Quik-Rig fast and simple integrated rigging
• Supported by LAPS II array design/prediction software
6
XLC215 HIGH-OUTPUT DUAL 15" SUBWOOFER LINE ARRAY ELEMENT
• 138 dB SPL
• Footprint identical to XLC127DVX
• Optional adapter grid for use with XLD281 and XLD291
• Two DVX3150A transducers
• Quik-Rig fast and simple integrated rigging
See page 46–47 for XLC Rigging and Accessories.
Frequency Response (-3 dB)
Frequency Range (-10 dB)
Horizontal Coverage
LF Power Handling 1
MB Power Handling 2
HF Power Handling 3
Sensitivity* LF/MB/HF
Max. SPL* (calc., peak), LF/MB/HF
Peak SPL @ 10m**
LF Transducer
MB Transducer
HF Transducer
Connectors
Enclosure Material
Grille
Environmental Specs
Dimensions (H x W x D)*
Net Weight*
*Single Box @ 1 Meter
**4 Box Array @ 10 Meters
1 100-500 Hz
2 500-2000 Hz
3 1600-8000 Hz
4 60-100 Hz
XLC127DVX
65 Hz – 16 kHz
54 Hz – 17 kHz
120°
500 W continuous, 2000 W peak
300 W continuous, 1200 W peak
150 W continuous, 600 W peak
95/101/111 dB
128/132/139 dB
130 dB
12" DVX3121A
Two 6.5" DVN2065
Two 3" ND6-16
2 Neutrik NL8
EVCoat–coated birch plywood
Powder-coated steel
IEC 529 IP24, MIL STD 810
14.25" x 39" x 22.5" (362 x 991 x 572 mm)
111 lb (50.4 kg)
XLC907DVX
65 Hz – 16 kHz
54 Hz – 17 kHz
90°
500 W continuous, 2000 W peak
300 W continuous, 1200 W peak
150 W continuous, 600 W peak
95/101/112 dB
128/132/140 dB
130 dB
12" DVX3121A
Two 6.5" DVN2065
Two 3" ND6-16
2 Neutrik NL8
EVCoat–coated birch plywood
Powder-coated steel
IEC 529 IP24, MIL STD 810
14.25" x 39" x 22.5" (362 x 991 x 572 mm)
111 lb (50.4 kg)
XLC215
40–400 Hz
30–400 Hz
1000 W continuous, 4000 W peak 4
102 dB
138 dB
124 dB
Two 15" DVX3150A
2 Neutrik NL8
EVCoat–coated birch plywood
Powder-coated steel
IEC 529 IP24, MIL STD 810
21.5" x 39" x 22.5" (546 x 991 x 572 mm)
129 lb (58.5 kg)
XLCi is a version of the XLC line that has been adapted for permanent installations. XLCi features visually appealing rigging that won't distract from architectural aesthetics. The performance of the three modules in the line is identical to that of the corresponding model in the XLC line. XLCi loudspeakers are supported by LAPS II array design/ prediction software.
XLCi127DVX
XLCi907DVX
120° HORIZONTAL THREE-WAY COMPACT LINE ARRAY ELEMENT
90° HORIZONTAL THREE-WAY COMPACT LINE ARRAY ELEMENT
• Accurate vertical control and coverage
• Compact, lightweight modules
• True three-way design
• Triamp operation; biamp operation with optional mid-high crossover (XLCi127DVX only)
• Fixed installation rigging
• Supported by LAPS II array design/prediction software
XLCi215 HIGH-OUTPUT DUAL 15" SUBWOOFER ELEMENT
• Footprint identical to other XLCi models
• Two DVX3150A transducers
• Compact and lightweight
• Fixed installation rigging
See page 47 for XLCi Rigging and Accessories.
Frequency Response (-3 dB)
Frequency Range (-10 dB)
Horizontal Coverage
LF Power Handling 1
MB Power Handling 2
HF Power Handling 3
Sensitivity* LF/MB/HF
Max. SPL* (calc., peak), LF/MB/HF
Peak SPL @ 10m**
LF Transducer
MB Transducer
HF Transducer
Connectors
Enclosure Material
Grille
Environmental Specs
Dimensions (H x W x D)*
Net Weight*
*Single Box @ 1 Meter
**4 Box Array @ 10 Meters
1 100-500 Hz
2 500-2000 Hz
3 1600-8000 Hz
4 60-100 Hz
XLCi127DVX
65 Hz – 16 kHz
54 Hz – 17 kHz
120°
500 W continuous, 2000 W peak
300 W continuous, 1200 W peak
150 W continuous, 600 W peak
95/101/111 dB
128/132/139 dB
130 dB
12" DVX3121A
Two 6.5" DVN2065
Two 3" ND6-16
2 Neutrik NL8
EVCoat–coated birch plywood
Powder-coated steel
IEC 529 IP24, MIL STD 810
14.25" x 36.5" x 22.5" (362 x 927 x 572 mm)
105 lb (48.1 kg)
XLCi907DVX
65 Hz – 16 kHz
54 Hz – 17 kHz
90°
500 W continuous, 2000 W peak
300 W continuous, 1200 W peak
150 W continuous, 600 W peak
95/101/112 dB
128/132/140 dB
130 dB
12" DVX3121A
Two 6.5" DVN2065
Two 3" ND6-16
2 Neutrik NL8
EVCoat–coated birch plywood
Powder-coated steel
IEC 529 IP24, MIL STD 810
14.25" x 36.5" x 22.5" (362 x 927 x 572 mm)
105 lb (48.1 kg)
XLCi215
40–400 Hz
30–400 Hz
300°
1000 W continuous, 4000 W peak 4
102 dB
138 dB
124 dB
Two 15" DVX3150A
2 Neutrik NL8
EVCoat–coated birch plywood
Powder-coated steel
IEC 529 IP24, MIL STD 810
21.5" x 36.5" x 22.5" (546 x 927 x 572 mm)
124 lb (56.3 kg)
7
XLVC
When a line array with limited size and weight is required,
XLVC is the choice of professionals around the world. XLVC
Very Compact Line Arrays combine reliability, intelligibility and acoustic performance in a package that is easy to configure and suspend. All cabinets feature simple, quick, integrated rigging. System design is easy using Electro-
Voice's free LAPS II array design/prediction software.
XLD281
XLD291
XLE181
XLE191
120° HORIZONTAL THREE-WAY DUAL 8" LINE ARRAY ELEMENT
• Full-bandwidth, three-way element (60 Hz – 20 kHz)
• CCT (Coverage Control Technology)
• Versatile subwoofer integration
• Biamp or triamp operation
• Neodymium transducers
• Simple, quick, integrated rigging
• Supported by LAPS II array design/prediction software
90° HORIZONTAL THREE-WAY DUAL 8" LINE ARRAY ELEMENT
• Full-bandwidth, three-way element
• CCT maintains 90° horizontal coverage to 250 Hz
• Versatile subwoofer integration
• Biamp or triamp operation
• Neodymium transducers
• Simple, quick, integrated rigging
• Supported by LAPS II array design/prediction software
120° HORIZONTAL TWO-WAY SINGLE 8" LINE ARRAY ELEMENT
90° HORIZONTAL TWO-WAY SINGLE 8" LINE ARRAY ELEMENT
• Full-bandwidth, two-way element
• Most compact, very lightweight
• Biamp or full-range operation
• Neodymium transducers
• Simple, quick, integrated rigging
• Supported by LAPS II array design/prediction software
XCS312 TRIPLE 12" CARDIOID BASS ELEMENT
• Versatile integration in main arrays
• Self-contained rigging hardware
• Supported by LAPS II array design/prediction software
8
See page 46–47 for XLVC Rigging and Accessories.
Frequency Response (-3 dB)
Frequency Range (-10 dB)
Horizontal Coverage
LF1 Power Handling 1
LF2 Power Handling 2
HF Power Handling 3
XLD281
65 Hz – 16 kHz
56 Hz – 16.5 kHz
120°
XLD291
65 Hz – 16.2 kHz
XLE181
65 Hz – 16 kHz
XLE191
65 Hz – 16.2 kHz
XCS312
45–100 Hz
200 W continuous, 800 W peak 200 W continuous, 800 W peak 200 W continuous, 800 W peak 200 W continuous, 800 W peak 1000 W continuous, 4000 W peak 4
Sensitivity* LF-MB/HF 99/112 dB
Max. SPL* (calc., peak), LF-MB/HF 128/137 dB
Peak SPL @ 10m**
LF Transducer
129 dB
8" DVN2080
56 Hz – 16.7 kHz
90°
200 W continuous, 800 W peak 200 W continuous, 800 W peak
80 W continuous, 320 W peak 80 W continuous, 320 W peak 80 W continuous, 320 W peak 80 W continuous, 320 W peak
99/113 dB
128/138 dB
130 dB
8" DVN2080
56 Hz – 16.5 kHz
120°
99/112 dB
128/137 dB
129 dB
8" DVN2080
56 Hz – 16.7 kHz
90°
99/113 dB
128/138 dB
130 dB
8" DVN2080
40–100 Hz
200°
500 W continuous, 2000 W peak 4
100 dB (half space)
136 dB (half space)
121 dB
Three 12" DVX3120A
LF-MB Transducer
HF Transducer
Connectors
Enclosure Material
Grille
Environmental Specs
Dimensions (H x W x D)
8" DVN2080
Two 2" ND2S
2 Neutrik NL8
8" DVN2080
Two 2" ND2S
2 Neutrik NL8
Two 2" ND2S
2 Neutrik NL8
Two 2" ND2S
2 Neutrik NL8 2 Neutrik NL8
EVCoat–coated birch plywood EVCoat–coated birch plywood EVCoat–coated birch plywood EVCoat–coated birch plywood EVCoat–coated birch plywood
Powder-coated steel
IEC 529 IP24, MIL STD 810
Powder-coated steel
IEC 529 IP24, MIL STD 810
Powder-coated steel
IEC 529 IP24, MIL STD 810
Powder-coated steel
IEC 529 IP24, MIL STD 810
Powder-coated steel
IEC 529 IP24, MIL STD 810
9.9" x 28.58" x 14.52"
(251 x 726 x 369 mm)
48 lb (21.8 kg)
9.9" x 28.58" x 14.52"
(251 x 726 x 369 mm)
48 lb (21.8 kg)
9.9" x 20.3" x 14.52"
(251 x 516 x 369 mm)
38 lb (17.24 kg)
9.9" x 20.3" x 14.52"
(251 x 516 x 369 mm)
38 lb (17.24 kg)
20" x 28.58" x 26.65"
(508 x 726 x 677 mm)
148 lb (67.13 kg) Net Weight
*Single Box @ 1 Meter
**4 Box Array @ 10 Meters
1 750-1750 Hz
2 100-750 Hz
3 1500-6500 Hz
4 60-100 Hz
9
Xi Series
The Electro-Voice Xi Series offers a potent combination of high output and ultra-linear performance in two-way systems. Xi Series loudspeakers incorporate the acoustic advantages of Ring-Mode Decoupling (RMD) and feature HP Constant Directivity waveguides to secure excellent directivity control and even coverage. To achieve sound performance without compromise, the Xi Series is designed for active operation, with the exception of the
Xi-1082, which contains a passive crossover network.
Xi loudspeaker cabinets are made of 18 mm, 13-ply birch plywood finished in a black EVCoat and protected by a full-face, steel front grille that is backed with foam.
All systems except the Xi-1082 have integrated handles and two L-tracks on the top and bottom. A detailed flying manual is available.
Xi-1082 8" TWO-WAY FULL-RANGE LOUDSPEAKER
• Ultra-compact, low profile
• Wide-range reproduction, maximized intelligibility
• Optimal under-balcony enclosure angles
• Suited for front-of-stage and near-field use
• Trapezoidal enclosure, vented for extended LF
• 1.25" DH3/2010A titanium-diaphragm HF driver
• Two 3/8" mounting bracket inserts
• Compatible with OmniMount Series 100
• EVCoat finish
• Available in black or white
• Mounting bracket available separately
Xi-1122A/85F 12" TWO-WAY FULL-RANGE LOUDSPEAKER
• Ultra-compact, high output
• Professional touring or installation
• Maximum intelligibility for voice
• 3" ND6-16 neodymium HF driver
• Trapezoidal (15°/side) 13-ply birch enclosure
• Built-in L-Track rigging
• 35 mm stand mount
• Integrated handles
• Available in black or white
10
Xi-1152A/64F
Xi-1152A/94F 15" TWO-WAY FULL-RANGE LOUDSPEAKERS
• High-SPL in limited-space applications
• Maximum intelligibility for voice
• EVX155 woofer with 4" voice coil and
Ring-Mode Decoupling (RMD)
• 3" ND6-16 neodymium HF driver
• Rotatable 60° x 40° (64F) or 90° x 40° (94F) coverage
• Solid bass down to 50 Hz (-3 dB)
• Trapezoidal (15°/side) 13-ply birch enclosure
• Built-in L-Track rigging
• 35 mm stand mount
• Integrated handles
• Available in black or white
See page 47 for XI-1082 Rigging and Accessories.
Xi-1082
Frequency Response (-3 dB) 50 Hz – 20 kHz (-10 dB)
Recommended High-Pass Frequency 60–80 Hz (12 dB/octave)
Axial Sensitivity (SPL, 1 W @ 1 m)
Max. SPL @ 1 m (calc.), full space
90 dB (LF/HF)
118 dB (LF/HF)
Long-Term Power Handling
Short-Term Power Handling (peak)
Coverage (nominal -6 dB) H° x V°
Directivity Index
175 W (LF/HF)
700 W (LF/HF)
90° x 40° (Const. Dir. waveguide)
11.2 dB (+1.8/-2.7 dB)
2–20 kHz
8" LF woofer (transducer)
MB woofer (transducer)
HF driver (transducer)
Crossover Frequencies
1.25" DH3/2010A
3,500 Hz (passive)
Nominal Impedance
Minimum Impedance
Input Connections
Dimensions (H x W at front x D)
Net Weight
8 Ω (LF/HF)
5.8 Ω (LF/HF)
Barrier strip
9.25" x 11.21" x 11.22"
(235 x 488 x 285 mm)
29.3 lb (13.3 kg)
Xi-1122A/85F
58 Hz – 17 kHz
Dx46 preset
99/110 dB (LF/HF)
130/135 dB (LF/HF)
300/75 W (LF/HF)
1200/300 W (LF/HF)
80° x 55° (Const. Dir. waveguide)
10.9 dB (+1.2/-2.9 dB)
1.2–16 kHz
12" DL-type
3" ND6-16
Dx46 preset
8 Ω/16 Ω (LF/HF)
8.5 Ω/13.4 Ω (LF/HF)
2 four-pin Speakon
22.99" x 14.76" x 14.01"
(584 x 375 x 356 mm)
69 lb (31.3 kg)
Xi-1152A/64F
50 Hz – 16 kHz
Dx46 preset
98/113 dB (LF/HF)
132/138 dB (LF/HF)
600/75 W (LF/HF)
2400/300 W (LF/HF)
60° x 40° (Const. Dir. waveguide)
13.4 dB (+1.3/-2.3 dB)
1.2–16 kHz
15" EVX155
3" ND6-16
Dx46 preset
8 Ω/16 Ω (LF/HF)
6.3 Ω/14.0 Ω (LF/HF)
2 four-pin Speakon
29.88" x 17.72" x 16.26"
(759 x 450 x 413 mm)
89.9 lb (40.8 kg)
Xi-1152A/94F
50 Hz – 16 kHz
Dx46 preset
98/112 dB (LF/HF)
132/137 dB (LF/HF)
600/75 W (LF/HF)
2400/300 W (LF/HF)
90° x 40° (Const. Dir. waveguide)
12.3 dB (+0.7/-1.5 dB)
1.2–16 kHz
15" EVX155
3" ND6-16
Dx46 preset
8 Ω/16 Ω (LF/HF)
6.3 Ω/12.2 Ω (LF/HF)
2 four-pin Speakon
29.88" x 17.72" x 16.26"
(759 x 450 x 413 mm)
89.9 lb (40.8 kg)
11
EVF is the most comprehensive standard line of frontloaded loudspeaker systems ever offered for installed sound. Available in 12" or 15" two-way configurations and enhanced with dedicated low-frequency systems, EVF loudspeakers match exceptional audio performance, efficiency, ease-of-use and aesthetics with unprecedented value. EVF systems incorporate the latest Electro-Voice components to ensure years of reliability and exceptional sound. "S" designated systems are equipped with SMX series symmetric drive woofers and ND2B 2" titanium compression drivers; upgraded "D" high definition systems are equipped with our highest performance DVX series symmetric drive woofers and the DH7N 3" pure titanium compression driver.
EVF two-way full-range systems are offered in seven coverage patterns that provide solutions for the widest possible range of installation challenges. The 12" Constant
Directivity waveguides can be rotated to work with a vertical or horizontal orientation. Biamp operation is supported, but the sophisticated fourth-order crossover and protection network makes cost-saving, passive operation extremely attractive. Using optional rigging accessories, you can create attractive clusters that include
EVF full-range systems, as well as EVF subwoofers or EVH full-range systems. Cabinets are available in three finishes:
EVCoat (interior use), PI (indirect weather exposure) or FG
(fiberglass—for direct weather exposure); they include twenty-two M10 threaded suspension points.
EVF "S" STANDARD SERIES
EVF-1122S 12" TWO-WAY FULL-RANGE LOUDSPEAKERS
• 2" ND2B titanium HF compression driver
• Rotatable Constant Directivity waveguide
• Six available patterns with coverage from 60º to 120º
• 98 dB sensitivity, 131 dB maximum SPL
• Power handling: 500 W continuous, 2000 W peak
• Fourth-order passive crossover with HF protection
• Trapezoidal 13-ply birch enclosure in three finishes: EVCoat, PI and FG
• Four M10 metric eyebolts included
12
EVF-1152S 15" TWO-WAY FULL-RANGE LOUDSPEAKERS
• 2" ND2B titanium HF compression driver
• Rotatable Constant Directivity waveguide
• Six available patterns with coverage from 40º to 90º
• 101 dB sensitivity, 134 dB maximum SPL
• Power handling: 500 W continuous, 2000 W peak
• Fourth-order crossover with HF protection
• Trapezoidal 13-ply birch enclosure in three finishes: EVCoat, PI and FG
• Four M10 metric eyebolts included
See page 48–49 for EVF Rigging and Accessories.
EVF Front-Loaded Systems
EVF STANDARD 12" TWO-WAY SYSTEMS
Frequency Response (-3 dB)
Frequency Range (-10 dB)
Recommended High-Pass Frequency
Sensitivity (SPL, 1 W/1 m)
Max. SPL @ 1 m (calc.)
System Power Handling (Continuous 3 , Program, Peak)
Nominal Impedance (Passive)
Minimum Impedance
Input Connections
Coverage (Nominal -6 dB) H° x V°
LF Transducer
EVF-1122S/64 EVF-1122S/66 EVF-1122S/94 EVF-1122S/96 EVF-1122S/99 EVF-1122S/126
60° x 40° 60° x 60°
58 Hz – 16 kHz 1,2
49 Hz – 19 kHz 1,2
65 Hz
98 dB
131 dB
500 W, 1000 W, 2000 W
8 Ω
6 Ω
Euroblock; PI and FG versions include dual-gland-nut input-panel cover
90° x 40° 90° x 60° 90° x 90°
12" SMX2121 driver
HF Transducer
Internal Passive Crossover Frequency
Enclosure Material
2" ND2B diaphragm compression driver
1,450 Hz
Grille
Environmental
13-ply weather-resistant birch
Standard versions: 16 ga Galvanneal, Powdercoat with screen behind
PI and FG versions: 18 ga Stainless, Powdercoat with hydrophobic cloth behind
Standard versions: IEC 60529 IP44
PI and FG versions: IEC 60529 IP55
22 M10 threaded suspension points (one EBK-M10-EVI kit of four forged eyebolts included) Suspension
Dimensions (H x W x D)
Net Weight
1 Half-space measurement in passive mode
2 FG (full outdoors) versions have no enclosure vents, somewhat reducing their low frequency response
3 EIA RS-426A (eight hours)
30.26" x 16" x 16.27" (768.6 x 406.3 x 413.3 mm)
63.1 lb (28.6 kg)
120° x 60°
EVF STANDARD 15" TWO-WAY SYSTEMS
Frequency Response (-3 dB)
Frequency Range (-10 dB)
Recommended High-Pass Frequency
Sensitivity (SPL, 1 W/1 m)
Max. SPL @ 1 m (calc.)
System Power Handling (Continuous 3 , Program, Peak)
Nominal Impedance (Passive)
Minimum Impedance
Input Connections
Coverage (Nominal -6 dB) H° x V°
EVF-1152S/43
40° x 30°
EVF-1152S/64
60° x 40°
EVF-1152S/66 EVF-1152S/94
70 Hz – 14 kHz 1,2
41 Hz – 18 kHz 1,2
45 Hz
101 dB
134 dB
500 W, 1000 W, 2000 W
8 Ω
6 Ω
Euroblock; PI and FG versions include dual-gland-nut input-panel cover
60° x 60° 90° x 40°
EVF-1152S/96
90° x 60°
LF Transducer
HF Transducer
Internal Passive Crossover Frequency
Enclosure Material
Grille
Environmental
15" SMX2151 driver
2" ND2B diaphragm compression driver
1,450 Hz
13-ply weather-resistant birch
Standard versions: 16 ga Galvanneal, Powdercoat with screen behind
PI and FG versions: 18 ga Stainless, Powdercoat with hydrophobic cloth behind
Standard versions: IEC 60529 IP44
PI and FG versions: IEC 60529 IP55
Suspension
Dimensions (H x W x D)
Net Weight
22 M10 threaded suspension points (one EBK-M10-EVI kit of four forged eyebolts included)
30.26" x 18.5" x 18.37" (768.6 x 469.8 x 466.6 mm)
70.9 lb (32.1 kg)
1 Half-space measurement in passive mode
2 FG (full outdoors) versions have no enclosure vents, somewhat reducing their low frequency response
3 EIA RS-426A (eight hours)
EVF-1152S/99
90° x 90°
13
14
EVF "D" HIGH DEFINITION SERIES
EVF "D" high definition systems are equipped with our highest performance DVX series symmetric drive woofers and the DH7N 3" pure titanium compression driver.
The result is lower distortion, cleaner sound reproduction at a given output level, compared with the equivalent
"S" version.
EVF-1122D
EVF-1152D
HIGH DEFINITION 12" TWO-WAY FULL-RANGE LOUDSPEAKERS
• 3" DH7N titanium/neodymium
HF compression driver
• DVX3151A woofer with fully symmetric drive
• Rotatable Constant Directivity waveguide
• Six available patterns with coverage from 60º to 120º
• 97 dB sensitivity, 131 dB maximum SPL
• Power handling: 600 W continuous, 2400 W peak
• Fourth-order passive crossover with HF protection
• Trapezoidal 13-ply birch enclosure in three finishes: EVCoat, PI and FG
• 22 M10 threaded suspension points
• Transformer kit available for distributed systems
• Four M10 metric eyebolts included
HIGH DEFINITION 15" TWO-WAY FULL-RANGE LOUDSPEAKERS
• Compact and lightweight
• Low distortion, high efficiency
• Ideal for fixed installations
• DVX3151A woofer with fully symmetric drive
• 3" DH7N titanium/neodymium
HF compression driver
• Rotatable Constant Directivity waveguide
• Six available patterns with coverage from 40º to 90º
• 100 dB sensitivity, 134 dB maximum SPL
• Power handling: 600 W continuous, 2400 W peak
• Fourth-order crossover with HF protection
• Trapezoidal 13-ply birch enclosure in three finishes: EVCoat, PI and FG
• 22 M10 threaded suspension points
• Transformer kit available for distributed systems
• Four M10 metric eyebolts included
See page 48–49 for EVF Rigging and Accessories.
EVF Front-Loaded Systems
EVF HIGH DEFINITION 12" TWO-WAY SYSTEMS
Frequency Response (-3 dB)
Frequency Range (-10 dB)
Recommended High-Pass Frequency
Sensitivity 1 W/1 m
Max. SPL/1 m (Calculated) 1
System Power Handling (Continuous 3 , Program, Peak)
Nominal Impedance (Passive)
Minimum Impedance
Input Connections
Coverage (Nominal -6 dB) H° x V°
LF Transducer
HF Transducer
Internal Passive Crossover Frequency
EVF-1122D/64 EVF-1122D/66 EVF-1122D/94 EVF-1122D/96 EVF-1122D/99 EVF-1122D/126
60° x 40° 60° x 60°
57 Hz – 18 kHz 1,2
49 Hz – 21 kHz 1,2
65 Hz
97 dB
131 dB
600 W, 1200 W, 2400 W
8 Ω
6 Ω
Euroblock; PI and FG versions include dual-gland-nut input-panel cover
90° x 40° 90° x 60° 90° x 90°
12" DVX3121A woofer
3" DH7N diaphragm compression driver
1,300 Hz
Enclosure Material
Grille
Environmental
13-ply weather-resistant birch
Standard versions: 16 ga Galvanneal, Powdercoat with screen behind
PI and FG versions: 18 ga Stainless, Powdercoat with hydrophobic cloth behind
Standard versions: IEC 60529 IP44
PI and FG versions: IEC 60529 IP55
22 M10 threaded suspension points (one EBK-M10-EVI kit of four forged eyebolts included) Suspension
Dimensions (H x W x D)
Net Weight
1 Half-space measurement in passive mode
2 FG (full outdoors) versions have no enclosure vents, somewhat reducing their low frequency response
3 EIA RS-426A (eight hours)
30.26" x 16.00" x 16.27" (768.6 x 406.3 x 413.3 mm)
65.5 lb (29.7 kg)
120° x 60°
EVF HIGH DEFINITION 15" TWO-WAY SYSTEMS
EVF-1152D/43 EVF-1152D/64 EVF-1152D/66 EVF-1152D/94 EVF-1152D/96 EVF-1152D/99
Frequency Response (-3 dB)
Frequency Range (-10 dB)
Recommended High-Pass Frequency
Sensitivity 1 W/1 m
Max. SPL/1 m (Calculated) 1
System Power Handling (Continuous 3 , Program, Peak)
Nominal Impedance (Passive)
Minimum Impedance
Input Connections
Coverage (Nominal -6 dB) H° x V°
LF Transducer
40° x 30°
HF Transducer
Internal Passive Crossover Frequency
Enclosure Material
Grille
Environmental
Suspension
70 Hz – 18 kHz 1,2
40 Hz – 21 kHz 1,2
45 Hz
100 dB
134 dB
60° x 40°
600 W, 1200 W, 2400 W
8 Ω
6 Ω
Euroblock; PI and FG versions include dual-gland-nut input-panel cover
60° x 60° 90° x 40°
15" DVX3151A woofer
90° x 60°
3" DH7N diaphragm compression driver
1,300 Hz
13-ply weather-resistant birch
Standard versions: 16 ga Galvanneal, Powdercoat with screen behind
PI and FG versions: 18 ga Stainless, Powdercoat with hydrophobic cloth behind
Standard versions: IEC 60529 IP44
PI and FG versions: IEC 60529 IP55
22 M10 threaded suspension points (one EBK-M10-EVI kit of four forged eyebolts included)
90° x 90°
Dimensions (H x W x D)
Net Weight
1 Half-space measurement in passive mode
2 FG (full outdoors) versions have no enclosure vents, somewhat reducing their low frequency response
3 EIA RS-426A (eight hours)
30.26" x 18.5" x 18.37" (768.6 x 469.8 x 466.6 mm)
75.7 lb (34.4 kg)
15
A range of acoustically and aesthetically matched front-loaded low-frequency systems are available to compliment your full-range systems. Cabinet heights are the same as those of EVF and EVH full-range loudspeakers systems, so you can create functional, attractive clusters using these low-frequency boxes with almost any combination of EVF and EVH loudspeakers.
EVF-1121S 12" FRONT-LOADED BASS ELEMENT
• Enhanced bass for installations
• Low-distortion EVS12SB woofer
• 99 dB sensitivity, 131 dB maximum SPL
• Power: 400 W continuous, 1600 W peak
• Trapezoidal 13-ply birch enclosure
• EVCoat, PI or FG finish
• 22 M10 threaded suspension points
• Four M10 metric eyebolts included
EVF-1151S
EVF-1181S
15" FRONT-LOADED BASS ELEMENT
• Enhanced bass for installations
• Low-distortion EVS15SB woofer
• 99 dB sensitivity, 131 dB maximum SPL
• Power: 400 W continuous, 1600 W peak
• Trapezoidal 13-ply birch enclosure
• EVCoat, PI or FG finish
• 22 M10 threaded suspension points
• Four M10 metric eyebolts included
18" FRONT-LOADED SUBWOOFER
• Ideal for installations
• Low-distortion EVS18SB woofer
• 99 dB sensitivity, 131 dB maximum SPL
• Power: 400 W continuous, 1600 W peak
• Trapezoidal 13-ply birch enclosure
• EVCoat, PI or FG finish
• 28 M10 threaded suspension points
• Four M10 metric eyebolts included
16
EVF-2121S DUAL 12" FRONT-LOADED SUBWOOFER
• Ideal for installations
• Low-distortion dual EVS12SB woofer
• 100 dB sensitivity, 135 dB maximum SPL
• Power: 800 W continuous, 3200 W peak
• Trapezoidal 13-ply birch enclosure
• EVCoat, PI or FG finish
• 22 M10 threaded suspension points
• Four M10 metric eyebolts included
EVF-2151D
EVF Front-Loaded Subwoofers
DUAL 15" FRONT-LOADED SUBWOOFER
• High power handling for installations
• Two premium DVX3159A woofers
• 101 dB sensitivity, 137 dB maximum SPL
• Power: 1000 W continuous, 4000 W peak
• Trapezoidal 13-ply birch enclosure
• EVCoat, PI or FG finish
• 28 M10 threaded suspension points
• Four M10 metric eyebolts included
See page 48–49 for EVF Sub Rigging and Accessories.
EVF-1121S EVF-1151S EVF-2121S EVF-1181S EVF-2151D
Frequency Response (-3 dB)
Frequency Range (-10 dB)
Recommended High-Pass Frequency
Internal Passive Low-Pass Filter
Sensitivity (SPL, 1 W/1 m)
Max. SPL @ 1 m (calc.)
70–98 Hz 1,2
48–120 Hz 1,2
50 Hz
100 Hz, 12 dB per octave
99 dB
131 dB
System Power Handling (Continuous 3 , Program, Peak) 400 W, 800 W, 1600 W
Nominal Impedance Passive: 4 Ω, Biamp: 8 Ω
Minimum Impedance
67–95 Hz
99 dB
131 dB
1,2
46–124 Hz
35 Hz
1,2
100 Hz, 12 dB per octave
400 W, 800 W, 1600 W
Passive: 4 Ω, Biamp: 8 Ω
54–145 Hz
41–330 Hz
45 Hz
None
100 dB
135 dB
1,2
1,2
800 W, 1600 W, 3200 W
Passive: N/A, Biamp: 4 Ω
35–100 Hz
28–650 Hz
33 Hz
None
99 dB
131 dB
1,2
1,2
400 W, 800 W, 1600 W
Passive: N/A, Biamp: 8 Ω
Passive: 3.4 Ω, Biamp: 5.5 Ω Passive: 3.4 Ω, Biamp: 6.4 Ω Passive: N/A, Biamp: 2.8 Ω Passive: N/A, Biamp: 6 Ω
Input Connections
Coverage (Nominal -6 dB)
Transducer 12" EVS12SB driver
Euroblock; PI and FG versions include dual gland nut input panel cover
15" EVS15SB driver
Omnidirectional in normal operating range
Two 12" EVS12SB driver 18" EVS18SB driver
Enclosure Material
Grille
Environmental
13-ply weather-resistant birch
Standard versions: 16 ga Galvanneal, Powdercoat with screen behind
PI and FG versions: 18 ga Stainless, Powdercoat with hydrophobic cloth behind
Standard versions: IEC 60529 IP44
PI and FG versions: IEC 60529 IP55
Suspension
Dimensions (H x W x D)
Net Weight
22 M10 threaded suspension points
(one EBK-M10-EVI kit of four forged eyebolts included)
30.26" x 16.0" x 16.27"
(768.6 x 406 x 413.3 mm)
57.7 lb (26.2 kg)
30.26" x 18.5" x 18.4"
(768.6 x 470 x 467 mm)
62.6 lb (28.4 kg)
1 Half-space measurement in passive mode
2 FG (full outdoors) versions have no enclosure vents, somewhat reducing their low frequency response
30.26" x 18.5" x 18.4"
(768.6 x 470 x 467 mm)
82.4 lb (37.4 kg)
40 Hz – 2.6 kHz
30 Hz – 3.2 kHz
35 Hz
None
101 dB
137 dB
1,2
1,2
1000 W, 2000 W, 4000 W
Passive: N/A, Biamp: 4 Ω
Passive: N/A, Biamp: 2.7 Ω
Two 15" DVX3159A drivers
28 M10 threaded suspension points
(one EBK-M10-EVI kit of four forged eyebolts included)
30.26" x 26.6" x 28.6"
(768.6 x 675.6 x 726.4 mm)
101.2 lb (45.9 kg)
30.26" x 26.6" x 28.6"
(768.6 x 675.6 x 726.4 mm)
117 lb (53.1 kg)
17
The EVH series is a dedicated installed sound solution that builds on everything Electro-Voice has learned about full-range, horn-loaded systems. Delivering exceptional value in venues of all sizes, these mid-sized 15" two-way cabinets feature a unique coaxial horn-loaded design that is unmatched for pattern control and intelligibility in reverberant environments.
A 400 W SMX2151 woofer provides the EVH's deep, rich lows, while horn loading extends directivity control below
500 Hz. High frequencies are handled by a pure titanium compression driver—either a standard 2" ("S" models) or a premium 3" with neodymium magnetic structure (high definition "D" models)—protected by an advanced fourthorder crossover network. Six coverage patterns (ranging from 40° x 30° to 90° x 90°) on rotatable Constant
Directivity waveguides offer extraordinary versatility.
Three finishes are available, including two for outdoor applications. EVH loudspeakers come installation-ready with 28 M10-threaded suspension points, making rigging extremely flexible. Wherever extended pattern control is a priority, the EVH series provides a proven, effective solution.
EVH systems are mechanically compatible with the EVF subs.
EVH-1152S TWO-WAY COAXIAL HORN-LOADED FULL-RANGE LOUDSPEAKERS
• Ideal for reverberant spaces
• Pattern control maintained below 500 Hz
• 15" SMX2151 woofer
• 2" ND2B titanium HF compression driver
• Rotatable Constant Directivity waveguide
• Six available coverage patterns from 40º x 30º to 90º x 90º
• 106 dB sensitivity, 139 dB maximum SPL
• Power handling: 500 W continuous, 2000 W peak
• Fourth-order passive crossover with HF protection
• Trapezoidal enclosure in three finishes: EVCoat, PI or FG
• 28 M10 threaded suspension points
• Four M10 metric eyebolts included
EVH-1152D HIGH DEFINITION TWO-WAY COAXIAL HORN-LOADED FULL-RANGE LOUDSPEAKERS
• Ideal for reverberant spaces
• Pattern control maintained below 500 Hz
• 15" SMX2151 woofer
• 3" DH7N titanium/neodymium
HF compression driver
• Rotatable Constant Directivity waveguide
• Six available coverage patterns from 40º x 30º to 90º x 90º
• 106 dB sensitivity, 139 dB maximum SPL
• Power handling: 500 W continuous, 2000 W peak
• Fourth-order passive crossover with HF protection
• Trapezoidal enclosure in three finishes: EVCoat, PI or FG
• 28 M10 threaded suspension points
• Four M10 metric eyebolts included
See page 48–49 for EVH Rigging and Accessories.
18
EVH Horn-Loaded Systems
EVH STANDARD TWO-WAY SYSTEMS
Frequency Response (-3 dB)
Frequency Range (-10 dB)
Recommended High-Pass Frequency
Sensitivity (SPL, 1 W/1 m)
Max. SPL @ 1 m (calc.)
System Power Handling (Continuous 2
Program, Peak)
,
Nominal Impedance (Passive)
Minimum Impedance
Input Connections
Coverage (Nominal -6 dB) H° x V°
LF Transducer
HF Transducer
Internal Passive Crossover Frequency
Enclosure Material
Grille
Environmental
Suspension
Dimensions (H x W x D)
Net Weight
EVH-1152S/43 EVH-1152S/64 EVH-1152S/66 EVH-1152S/94 EVH-1152S/96 EVH-1152S/99
106 dB
139 dB
105 dB
138 dB
105 dB
138 dB
60 Hz – 15 kHz 1
50 Hz – 20 kHz 1
60 Hz
105 dB
138 dB
105 dB
138 dB
104 dB
137 dB
40° x 30°
500 W, 1000 W, 2000 W
60° x 40°
8 Ω
6 Ω
Euroblock; PI and FG versions include dual-gland-nut input-panel cover
60° x 60° 90° x 40° 90° x 60°
15" SMX2151 driver
2" ND2B diaphragm compression driver
1,300 Hz
13-ply weather-resistant birch
Standard versions: 16 ga Galvanneal, Powdercoat with screen behind
PI and FG versions: 18 ga Stainless, Powdercoat with hydrophobic cloth behind
Standard versions: IEC 60529 IP33
PI and FG versions: IEC 60529 IP55
28 M10 threaded suspension points (one EBK-M10-EVI kit of four forged eyebolts included)
30.26" x 30.26" x 26.77" (768.6 x 768.6 x 680.1 mm)
143 lb (64.9 kg)
90° x 90°
EVH HIGH DEFINITION TWO-WAY SYSTEMS
Frequency Response (-3 dB)
Frequency Range (-10 dB)
Recommended High-Pass Frequency
Sensitivity (SPL, 1 W/1 m)
Max. SPL @ 1 m (calc.)
System Power Handling
(Continuous 2 , Program, Peak)
Nominal Impedance (Passive)
Minimum Impedance
Input Connections
Coverage (Nominal -6 dB) H° x V°
LF Transducer
HF Transducer
Internal Passive Crossover Frequency
Enclosure Material
Grille
Environmental
Suspension
Dimensions (H x W x D)
Net Weight
1 Half-space measurement in passive mode
2 EIA RS-426A (eight hours)
EVH-1152D/43 EVH-1152D/64 EVH-1152D/66 EVH-1152D/94 EVH-1152D/96 EVH-1152D/99
106 dB
139 dB
105 dB
138 dB
105 dB
138 dB
60 Hz – 17 kHz 1
50 Hz – 20 kHz 1
60 Hz
105 dB
138 dB
105 dB
138 dB
104 dB
137 dB
40° x 30°
500 W, 1000 W, 2000 W
60° x 40°
8 Ω
6 Ω
Euroblock; PI and FG versions include dual-gland-nut input-panel cover
60° x 60° 90° x 40° 90° x 60°
15" SMX2151 driver
3" DH7N diaphragm compression driver
1,300 Hz
13-ply weather-resistant birch
Standard versions: 16 ga Galvanneal, Powdercoat with screen behind
PI and FG versions: 18 ga Stainless, Powdercoat with hydrophobic cloth behind
Standard versions: IEC 60529 IP33
PI and FG versions: IEC 60529 IP55
28 M10 threaded suspension points (one EBK-M10-EVI kit of four forged eyebolts included)
30.26" x 30.26" x 26.77" (768.6 x 768.6 x 680.1 mm)
145.5 lb (66.1 kg)
90° x 90°
19
20
The Expandable Vertical Array (EVA) series is a vertical line array with a unique, elegant system design that provides a simple solution for installed sound applications. EVA offers true line array performance and coherent far-field summing from the patented Hydra plane wave generator.
The internal, hidden rigging not only looks great, but also makes EVA incredibly easy to install. The sophisticated internal crossover lets you power up to eight EVA full-range modules (16 line array elements) from a single amplifier channel, eliminating the need for external crossovers or DSP. The four full-range modules in the series are complemented by two matching subwoofers that can be flown in the array. If you think that your budget isn't big enough for a great sounding line array, EVA may be just the answer you're looking for.
Features:
• High performance, cost-effective
• Ideal for fixed installation line arrays
• Two array elements in each module
• Two 8" low-distortion woofers
• Four 1.25" titanium diaphragm HF drivers
• Advanced Hydra plane wave generators
• Constant Directivity waveguide
• High sensitivity (104 dB) for high output
• Super efficient: drive up to 8 boxes from a single amp channel
• Sixth-order passive crossover with HF protection
• Integrated hidden suspension hardware
• Choice of three finishes: indoor, PI and FG
• EVADA (EVA Design Assistant) software tool
EVA-2082S 126 EVA-2082S 1220
DUAL-ELEMENT
120° BY 6°
FULL-RANGE LINE-
ARRAY MODULE
DUAL-ELEMENT
120° BY 20°
FULL-RANGE LINE-
ARRAY MODULE
EVA-2082S 906
DUAL-ELEMENT
90° BY 6° FULL-RANGE
LINE-ARRAY MODULE
EVA-2082S 920
DUAL-ELEMENT
90° BY 20° FULL-RANGE
LINE-ARRAY MODULE
EVA Subwoofers
EVA SUBWOOFERS
Features:
• High power, front loaded
• Ideal for fixed installations
• Seamless rigging with EVA line arrays
EVA-1151D
• DVX3159A woofer for low distortion at high SPL
• Steel-reinforced 13-ply birch enclosure
15" SUBWOOFER LINE ARRAY ELEMENT
• DVX3159A woofer for low distortion at high SPL
• 98 dB sensitivity (1 W/1 m half space)
• Power handling: 500 W continuous, 2000 W peak
• 125/131 dB maximum SPL (continuous/peak)
• Integrated hidden suspension hardware
• Splays of 0° or 5° between modules
• Choice of three finishes: EVCoat, PI and FG
EVA-2151D
DUAL 15" SUBWOOFER LINE ARRAY ELEMENT
• Two DVX3159A woofers for low distortion at high SPL
• 100 dB sensitivity (1 W/1 m half space)
• Power handling: 1000 W continuous, 4000 W peak
• 130/136 dB maximum SPL (continuous/peak)
• Choice of two finishes: EVCoat and PI
(EVA-2151D not available in FG version)
See page 48–49 for EVA Rigging and Accessories.
EVA-2082S 1220 EVA-2082S 126 EVA-2082S 906 EVA-2082S 920 EVA-1151D EVA-2151D
Frequency Response
(-3 dB)
Recommended High-Pass
Frequency
Sensitivity (SPL, 1 W/1 m)
Max. SPL @ 1 m (calc.)
60 Hz – 19 kHz
50 Hz
104 dB (3 module array)
135 dB
48–250 Hz (half space)
35 Hz, 24 dB per Octave
BW
98 dB, Arithmetic average,
55–100 Hz (half space)
131 dB (half space)
38–200 Hz (half space)
32 Hz, 24 dB per Octave
BW (half space)
100 dB, Anithmetic average,
55–100 Hz (half space)
130/133/136 dB (half space)
System Power Handling
(Continuous, Program, Peak)
Nominal Impedance
(Passive)
Input Connections
Frequency Range (-10 dB)
Coverage
(Nominal -6 dB) H°
Coverage
(Nominal -6 dB) V°
LF Transducer
HF Transducer
Crossover Frequency
Minimum Impedance
Enclosure Material
Grille
Suspension
120°
20°
Dimensions (H x W x D)
Net Weight
20.17" x 23.5" x 14.53"
(512.2 x 596.9 x 369.1 mm)
81.0 lb (36.8 kg)
120°
6°
350, 700, 1400 W
16 Ω
45 Hz – 20 kHz
90°
6°
Euroblock
90°
20°
500 W, 1000 W, 2000 W
8 Ω
35–250 Hz (half space)
Omnidirectional
Omnidirectional
1000 W, 2000 W, 4000 W
4 Ω
28–200 Hz (half space)
Omnidirectional
Omnidirectional
Two 8" EVS2008 drivers
Four 1.25" DH2005 diaphragm compression driver
1,740 Hz
12 Ω
DVX3159A
None
100 Hz active
5.8 Ω
Two DVX3159A
None
100 Hz active
2.8 Ω
Birch plywood
16 ga Galvanneal, powder-coated; PI Version: stainless steel with hydrophobic cloth
EVA grid (sold separately)
20.25" x 23.5" x 14.1"
(514.4 x 596.9 x 358.2 mm)
81.8 lb (37.1 kg)
20.25" x 23.5" x 14.1"
(514.4 x 596.9 x 358.2 mm)
81.8 lb (37.1 kg)
20.17" x 23.5" x 14.53"
(512.2 x 596.9 x 369.1 mm)
81.0 lb (36.8 kg)
23.5" x 23.5" x 18.16"
(596.9 x 596.9 x 461.3 mm)
89.1 lb (40.4 kg)
30.5" x 23.42" x 31.2"
(930.4 x 597 x 792.5 mm)
178 lb (80.8 kg)
21
22
Bringing ultracompact design to the EV Innovation family of installation loudspeakers, the EVU series shines in applications including delay, under-balcony fill, front-fill, wall mounting and distributed audio. EVU loudspeakers feature a rotatable Constant Directivity waveguide that provides truly uniform sound dispersion while allowing the horizontal coverage pattern to be independent of enclosure orientation. Sonically matched to complement the other
EV Innovation products, EVU helps make EV Innovation the industry's most comprehensive and versatile line of installed-sound loudspeakers.
A fourth-order, 90 Hz high-pass filter is recommended for use with all EVU loudspeakers.
Features:
• Sonically matched to all EV Innovation lines
• Sophisticated 18 dB octave passive crossover/EQ networks
• Asymmetrical enclosure for ideal under-balcony and stage-lip aiming
• Optional NL4-type connector panel
• One 1.3" diaphragm compression driver
• U-bracket included
• Optional 70 V and 100 V operation
• OmniMount-compatible rear mounting points
• Available in black or white (interior use)
EVU-1062/95 ULTRACOMPACT TWO-WAY WITH SINGLE 6.5" WOOFER
• Ultracompact 8" x 14.5" enclosure
• 90° x 50° rotatable Constant Directivity waveguide
• Ultra-high power handling for size: 160 W continuous
• 120 dB maximum SPL
• Asymmetrical trapezoidal enclosure design
• Compatible with OmniMount
EVU-2062/95 ULTRACOMPACT TWO-WAY WITH DUAL 6.5" WOOFERS
• Ultracompact 8" x 21" enclosure
• 90° x 50° rotatable Constant Directivity waveguide
• Ultra-high power handling for size: 300 W continuous
• 125 dB maximum SPL
• Asymmetrical trapezoidal enclosure design
• Compatible with OmniMount
EVU Ultracompact Systems
EVU-1082/95
EVU-2082/95
ULTRACOMPACT TWO-WAY WITH SINGLE 8" WOOFER
• Ultracompact 10 x 16" enclosure
• 90° x 50° rotatable Constant Directivity waveguide
• Ultra-high power handling for size: 175 W continuous
• 123 dB maximum SPL
• Asymmetrical trapezoidal enclosure design
• Compatible with OmniMount
ULTRACOMPACT TWO-WAY WITH DUAL 8" WOOFERS
• Ultracompact 10 x 24" enclosure
• 90° x 50° rotatable Constant Directivity waveguide
• Ultra-high power handling for size: 350 W continuous
• 126 dB maximum SPL
• Asymmetrical trapezoidal enclosure design
• Compatible with OmniMount
See page 49 for EVU Rigging and Accessories.
Frequency Response (−3 dB)
Frequency Response (−10 dB)
Recommended High-Pass Frequency
EVU-1062/95
110 Hz – 16 kHz 1
65 Hz – 20 kHz 1
90 Hz
Axial Sensitivity (1 W/1 m) 92 dB
Maximum SPL (calc.) Continuous, Peak 114, 120 dB
Waveguide 6" x 6", rotatable
Horizontal Coverage
Vertical Coverage
Power Handling (Continuous, Peak)
LF Transducer
HF Transducer
Nominal Impedance
Minimum Impedance
Connectors
Enclosure Material
Minimum Impedance
Color
Grille, Standard Versions
Suspension
Dimensions (H x W x D)
Net Weight
1
2
Half-space measurement
EIA RS-426A (eight hours)
90°
50°
160, 640 W 2
6.5" ICT-6.5-8 woofer
1.3" diaphragm ICT-1-8 compression driver
8 Ω
6 Ω
4-pin Euroblock (up to 10 AWG wire)
9-ply hardwood plywood
Textured paint
Black or white
18 ga steel with cloth behind
Six M8 threaded points
8.21" x 14.6" x 8.14"
(209 x 370 x 207 mm)
14.4 lb (6.53 kg)
EVU-2062/95
100 Hz – 16 kHz 1
EVU-1082/95
110 Hz – 16 kHz 1
EVU-2082/95
100 Hz – 16 kHz 1
70 Hz – 20 kHz 1
90 Hz
94 dB
119, 125 dB
6" x 6", rotatable
65 Hz – 20 kHz 1
90 Hz
95 dB
117, 123 dB
6" x 6", rotatable
60 Hz – 20 kHz 1
90 Hz
95 dB
120, 126 dB
6" x 6", rotatable
90°
50°
300, 1200 W 2
Two 6.5" ICT-6.5-8 woofers
1.3" diaphragm ICT-1-8 compression driver
8 Ω
90°
50°
175, 700 W driver
8 Ω
2
8" ICT-8-8 woofer
1.3" diaphragm ICT-1-8 compression
90°
50°
350, 1400 W 2
Two 8" ICT-8-8 woofers
1.3" diaphragm ICT-1-8 compression driver
8 Ω
6 Ω 6 Ω 6 Ω
4-pin Euroblock (up to 10 AWG wire) 4-pin Euroblock (up to 10 AWG wire) 4-pin Euroblock (up to 10 AWG wire)
9-ply hardwood plywood
Textured paint
9-ply hardwood plywood
Textured paint
9-ply hardwood plywood
Textured paint
Black or white
18 ga steel with cloth behind
Six M8 threaded points
8.21" x 21.0" x 8.14"
(209 x 533 x 207 mm)
25.0 lb (11.3 kg)
Black or white
18 ga steel with cloth behind
Six M8 threaded points
9.73" x 16.1" x 9.34"
(247 x 409 x 237 mm)
16.3 lb (7.40 kg)
Black or white
18 ga steel with cloth behind
Six M8 threaded points
9.73" x 24.2" x 9.34"
(247 x 615 x 237 mm)
28.3 lb (12.8 kg)
23
EVI Variable Intensity Loudspeaker Systems
EVI VARIABLE INTENSITY COVERAGE PATTERN (3-2-1 RULE):
If speaker mount-height = H, then coverage length = 3H, coverage width = 2H and first row coverage = 1H
EVI provides a simple, economical solution for permanent installations requiring even coverage over a fixed rectangular area. In a typical room, the distance from a front-mounted loudspeaker to the last row is two or more times the distance to the front row, resulting in a substantial front-to-back difference in level and intelligibility. The Variable Intensity horn counters this problem by increasing the sound sent to the back of the room by six to eight dB, balancing SPL distribution without the expense and complexity of additional systems or components.
EVI-12 12" TWO-WAY VARIABLE INTENSITY LOUDSPEAKER
• Variable Intensity horn for even coverage
• Two-way, full-range loudspeaker
• High sensitivity
• Vented LF enclosure
• 1.25" HF driver with titanium diaphragm
• PRO™ Driver protection circuit
• Multi-angled housing
• Five 3/8" hanging points
EVI-15 15" TWO-WAY VARIABLE INTENSITY LOUDSPEAKER
• Variable Intensity horn for even coverage
• Two-way, full-range loudspeaker
• High sensitivity
• Vented LF enclosure
• 1.25" HF driver with titanium diaphragm
• PRO™ Driver protection circuit
• Multi-angled housing
• Five 3/8" hanging points
EVI-28 DUAL 8" TWO-WAY VARIABLE INTENSITY LOUDSPEAKER
• Ideal for reverberant spaces
• Variable Intensity horn for even coverage
• Two-way, full-range loudspeaker
• Vented LF enclosure
• 1.25" HF driver with titanium diaphragm
• PRO™ Driver protection circuit
• Multi-angled housing
• Stacked, frequency-shaded woofers for pattern control below 500 Hz
• Three 3/8" hanging points
See page 49 for EVI Rigging and Accessories.
24
Width = 2H
Length = 3H
H
H
EVI-12
Frequency Response (-10 dB)
Sensitivity (SPL 1 W/1 m)
50 Hz – 20 kHz
99 dB
Max. SPL/1m (calc.) 129 dB
Power Handling (Continuous, Peak) 250 W, 1000 W
Coverage, H x V
LF Transducer
60° x 70° long throw, 110° x 90° short throw
12"
HF Transducer
Crossover frequency
Nominal impedance (minimum)
Input connections
Dimensions (H x W at front x D)
Net Weight
1.25" DH3/2010A compression driver (1" exit)
2,000 Hz
8 Ω
Screw terminal
21.8" x 14" x 27.5" (554 x 356 x 699 mm)
48 lb (21.8 kg)
EVI-15
50 Hz – 20 kHz
100 dB
130 dB
250 W, 1000 W
65° x 65° long throw, 110° x 65° short throw
15"
1.25" DH3/2010A compression driver (1" exit)
2,000 Hz
8 Ω
Screw terminal
23" x 16.9" x 30.2" (584 x 429 x 766 mm)
53 lb (24.0 kg)
EVI-28
60 Hz – 20 kHz
93 dB
123 dB
250 W, 1000 W
65° x 65° long throw, 110° x 65° short throw
Two 8"
1.25" DH3/2010A compression driver (1" exit)
2,000 Hz
8 Ω
Screw terminal
13.9" x 19.5" x 20.6" (353 x 496 x 523 mm)
36 lb (16.3 kg)
25
EVID SURFACE-MOUNT SYSTEMS
EVID premium commercial loudspeakers bring bestin-class sonic characteristics and stunning high fidelity to a broad range of installation applications, including performance and sports venues, retail environments, conference and meeting rooms, and hospitality settings, such as restaurants and bars. Available in both flush-mount and surface-mount configurations, EVID loudspeakers feature innovative designs that beautify not only the sound of a room but also its looks. EVID 3.2, 4.2 and 6.2 models are available in "T"-designated versions with internal 70 or
100 V line transformer. High power and high performance,
EVID is the superior solution to today's installation needs.
EVID 3.2
DUAL 3.5" TWO-WAY SURFACE-MOUNT LOUDSPEAKER
• Ultra-compact full-range
• Ideal for restaurants, bars, patios and retail
• Vented LF enclosure
• 0.75" titanium diaphragm HF driver with neodymium magnetic structure
• Full-bandwidth overload protection (LF and HF)
• Elliptical weather-resistant ABS enclosure
• Paintable black or white finish
• Magnetically shielded for video applications
• Strong-Arm Mount for easy, flexible aiming
• "T" version for 70 or 100 V distributed systems
EVID 4.2
DUAL 4" TWO-WAY SURFACE-MOUNT LOUDSPEAKER
• Compact full-range
• Ideal for restaurants, bars, patios and retail
• Vented LF enclosure
• 1" titanium diaphragm HF driver with neodymium magnetic structure
• Coherent Coverage Waveguide
• Full-bandwidth overload protection (LF and HF)
• Elliptical weather-resistant ABS enclosure
• Paintable black or white finish
• Magnetically shielded for video applications
• Strong-Arm Mount for easy, flexible aiming
• "T" version for 70 or 100 V distributed systems
EVID 6.2
DUAL 6" TWO-WAY SURFACE-MOUNT LOUDSPEAKER
• Compact full-range
• Ideal for shopping malls, sports bars and health clubs
• Vented LF enclosure
• 1" titanium diaphragm HF driver with neodymium magnetic structure
• Coherent Coverage Waveguide
• Full-bandwidth overload protection (LF and HF)
• Elliptical weather-resistant ABS enclosure
• Paintable black or white finish
• Magnetically shielded for video applications
• Strong-Arm Mount for easy, flexible aiming
• "T" version for 70 or 100 V distributed systems
26
EVID 3.2, EVID 4.2 AND EVID 6.2
INCLUDED
EV's Strong-Arm Mount (SAM) comes with each
EVID system and includes a hex key tool. SAM has angle markers to make installation easier.
Angle markers
100° 90°
EVID In-Wall Speaker Systems
EVID 12.1
12" CORNER-MOUNT, DUAL VOICE COIL SUBWOOFER
• Supplemental bass for indoor systems
• Ideal for sports bars, dance floors, retail and health clubs
• High-excursion woofer with dual voice coil to accommodate L/R channels
• High sensitivity, high power-handling
• Crossed-over pass-thru for up to four satellite speakers
• Trapezoidal shape for flexible placement and optimal bass loading
• Steel-reinforced cabinet with mounting hardware included
• Paintable black or white finish
• One 3/8" 16-thread forged steel eyebolt is included. A second is necessary for hanging.
• The mounting bracket passes
EIA 636 at a safety factor of
8:1 and included for onwall or corner mounting.
EVID IN-WALL SPEAKER SYSTEMS
EVID FM 4.2
4" TWO-WAY FLUSH-MOUNT LOUDSPEAKER
• Shallow profile, ideal for tight wall or ceiling spaces
• Tuned passive radiator extends bass, enhances performance
• High quality 1" titanium dome tweeter
• Full-bandwidth overload protection
• 70 V, 100 V and 8 Ω operation in the same model for off-the-shelf versatility
• Front-panel mode/wattage switch
• Fully-sealed enclosure provides superior isolation to protect adjacent rooms
• Secure Phoenix-style pass-through connectors for easy wiring and installation
• Four point “quick mounting” tabs for fast attachment in any wall cavity
• Can-mounted transformer for enhanced rigidity
• Ribbed back can eliminates flexing
EVID FM 6.2
6" TWO-WAY FLUSH-MOUNT LOUDSPEAKER
• Shallow profile, ideal for tight wall or ceiling spaces
• Tuned passive radiator extends bass, enhances performance
• High quality 1" titanium dome tweeter
• Full-bandwidth overload protection
• 70 V, 100 V and 8 Ω operation in the same model for off-the-shelf versatility
• Front-panel mode/wattage selector
• Fully-sealed enclosure provides superior isolation to protect adjacent rooms
• Secure Phoenix-style pass-through connectors for easy wiring and installation.
• Four point “quick mounting” tabs for fast attachment in any wall cavity
• Can-mounted transformer for enhanced rigidity
• Ribbed back can eliminates flexing
See page 49 for EVID Rigging and Accessories.
Frequency Range (-10 dB)
EVID 3.2
85 Hz – 20 kHz
Sensitivity (SPL, 1 W/1 m)
Max. SPL/1m (calc.)
87 dB
112 dB
Power Handling (Continuous, Peak) 75 W, 300 W
Transformer taps
(transformer version only)
Coverage, H x V
70 V: 5 W
100 V: 10 W
140° x 100°
Two 3.5" LF Transducer
HF Transducer
Nominal impedance
(non-transformer version)
Minimum impedance
(non-transformer version)
Input connections
Dimensions (H x W at front x D)
Net Weight (incl. mounting bracket)
0.75"
8 Ω
6 Ω
Spring terminal
9.2" x 5.1" x 6.5"
(234 x 127 x 165 mm)
3.3 lb (1.5 kg)
EVID 4.2
65 Hz – 20 kHz
EVID 6.2
62 Hz – 20 kHz
EVID 12.1
40–140 Hz
89 dB
115 dB
94 dB
122 dB
100 W, 400 W
70 V: 3.75 W
70 V/100 V: 7.5, 15, 30 W
120° x 80°
150 W, 600 W
70 V: 7.5 W
70 V/100 V:15, 30, 60 W
100° x 80°
Two 4" Two 6"
100 dB (1/4 space)
128 dB (1/4 space)
175 W, 700 W (per coil)
12"
1"
8 Ω
1"
8 Ω 8 Ω
6 Ω
Spring terminal
12.2" x 6.9" x 8.5"
(310 x 175 x 216 mm)
8.5 lb (3.9 kg)
6 Ω
Spring terminal
16.5" x 9" x 11.75"
(419 x 228 x 298 mm)
12 lb (5.3 kg)
6 Ω
Spring terminal
16.25" x 23" x 12"
(412 x 584 x 305 mm)
40 lb (18.1 kg)
EVID FM 4.2
52 Hz – 20 kHz
EVID FM 6.2
52 Hz – 20 kHz
87 dB
110 dB
50 W, 200 W
70 V: 1.75, 3.75, 7.5, 15,
30 W
150° x 150°
90 dB
115 dB
75 W, 300 W
70 V: 7.5, 15, 30, 60 W
120° x 120°
4", plus 4" passive radiator 6", plus 6" passive radiator
1" (titanium dome)
8 Ω
1" (titanium dome)
8 Ω
4-pin Phoenix
13.78" x 7.41" x 3.76"
(350 x 188.3 x 95.6 mm)
6.39 lb (2.9 kg)
4-pin Phoenix
18.31" x 10.08" x 3.95"
(465 x 256 x 100.3 mm)
12.79 lb (5.8 kg)
27
28
Designed with both the contractor and listener in mind,
EVID ceiling speakers are high-performance problemsolvers that deliver exceptional sound in even the most challenging situations. From the compact power of the C4.2 to the exclusive waveguide-coupled design of the C8.2HC, each great-sounding EVID solution is uniquely suited to handle installer needs across a specific range of intended applications. Sonically superior and aesthetically pleasing, every EVID ceiling model installs with ease and provides lasting value. For commercial sound across all venue types, EVID has the ceiling covered.
EVID C4.2
4" TWO-WAY COAXIAL CEILING LOUDSPEAKER
• Designed for use in air-handling spaces
• Ported enclosure for extended bass response
• Waveguide-coupled 0.75" titanium-coated tweeter
• Full-bandwidth overload protection
• Integrated transformer for 70 V, 100 V or 8 Ω use
• Front-panel mode/wattage selector
• Safe, easy installation with included tile bridge and mounting ring
• Available in black or white
• Complete package, requires no additional accessories
EVID C8.2
EVID C8.2LP
8" TWO-WAY COAXIAL CEILING LOUDSPEAKER
• Ported enclosure for extended bass response
• Waveguide-coupled 1" titanium-coated tweeter
• Full-bandwidth overload protection
• Integrated transformer for 70 V, 100 V or 8 Ω use
• Front-panel mode/wattage selector
• Safe, easy installation with included tile bridge and mounting ring
• Complete package, requires no additional accessories
• Low-profile LP version delivers rich sound in tight spaces
• EVID C8.2 available in black or white
EVID C8.2HC
8" PATTERN-CONTROL TWO-WAY COAXIAL CEILING LOUDSPEAKER
• Maximum fidelity and intelligibility for high ceilings
• Ported enclosure for extended bass response
• Waveguide-coupled 1" titanium-coated tweeter
• Full-bandwidth overload protection
• Integrated transformer for 70 V, 100 V or 8 Ω use
• Front-panel mode/wattage selector
• Safe, easy installation with included tile bridge and mounting ring
• White semi-gloss perforated grille
• Complete package, requires no additional accessories
EVID C10.1
EVID Ceiling Speaker Systems
10" HIGH-POWER CEILING SUBWOOFER
• Supplemental LF for ceiling systems
• High-excursion woofer in ported enclosure for extended lows
• Low pass network with overload protection
• Integrated transformer for 70 V, 100 V or 8 Ω use
• Front-panel mode/wattage selector
• Internally damped heavy-gauge steel enclosure
• Safe, easy installation with included tile bridge and mounting ring
• White semi-gloss perforated grille
• Complete package, requires no additional accessories
EVID C12.2
12" TWO-WAY COAXIAL CEILING LOUDSPEAKER
• Full-range power for high ceilings, large spaces
• High sensitivity, high power-handling
• Integrated transformer with automatic saturation compensation for distortionfree 70 V, 100 V or 8 Ω use
• Front-panel mode/wattage selector
• White semi-gloss perforated grille
• Heavy-gauge steel enclosure in black
• 3/8" threaded-rod mount points for open ceilings
• Safe, easy installation with included tile bridge and mounting ring
• Complete package, requires no additional accessories
Frequency Range (-10 dB)
Sensitivity (SPL, 1 W @ 1 m)
Power Handling (8 Ω)
Coverage Pattern
Transformer Power Taps
LF Transducer
HF Transducer
Input Configuration
Dimensions (H x Diameter)
Net Weight
Acoustic Design
Cabinet Construction
Mounting System
Grille Construction
Available Colors
EVID C4.2
65 Hz – 20 kHz
86 dB
80 W (overload protected)
130° conical
1.88 (70 V only), 3.75, 7.5, 15,
30 W
4" polypropylene cone
0.75" Ti Mylar Laminate Dome
8 Ω / 70 V / 100 V
6.93" x 7.13"
(176 x 181 mm)
6.0 lb (2.7 kg)
EVID C8.2
EVID C8.2LP
50 Hz – 20 kHz
91 dB
100 W (overload protected)
110° conical
1.88 (70 V only), 3.75, 7.5, 15,
30 W
EVID C8.2HC
50 Hz – 20 kHz
93 dB
100 W (overload protected)
75° conical (@ >1 kHz)
8" polypropylene cone
1" Ti Mylar Laminate Dome
8 Ω / 70 V / 100 V
7.01" x 10.63" (178 x 270 mm)
10.04" x 10.63" (255 x 270 mm)
11.0 lb (5.0 kg)
7.5 (70 V only), 15, 30, 60 W
8" polypropylene cone plus waveguide
1" Ti Mylar Laminate Dome
8 Ω / 70 V / 100 V
11.99" x 12.60"
(303 x 320 mm)
13.2 lb (6.0 kg)
EVID C12.2
65 Hz – 20 kHz
100 dB
100 W
90° average
4 (70 V only), 8, 16, 32, 64 W
ASC protected
12" EVID 920-8B (coax)
1" coax
8 Ω / 70 V / 100 V
13.18" x 16.31"
(333 x 414 mm)
27.12 lb (12.3 kg)
Ported cabinet, internally damped, two-way (passive crossover included)
Steel enclosure and UL94V-0 rated baffle and bezel
Integrated 3-point toggle anchors
Powder-coated steel
White (paintable surface)
EVID C10.1
45–180 Hz
94 dB
150 W
180°
7.5 (70 V only), 15, 30, 60 W
10" polypropylene cone
8 Ω / 70 V / 100 V
11.99" x 12.60"
(303 x 320 mm)
15.4 lb (7.0 kg)
Dual ported cabinet, internally damped
29
S-40 ULTRACOMPACT 5.25" TWO-WAY FULL-RANGE LOUDSPEAKER
Delivering high performance in an ultra-compact package, the S-40 is ideal for both distributed and near-field applications requiring high-quality sound. The two-way short-throw system is housed in an optimally vented, high-impact polystyrene enclosure that is suited for installation both indoors and out. Lows are handled by a 5.25" direct-radiating woofer with a polypropylene cone, while the high-frequency section is a
1" direct-radiating soft-dome tweeter that is ferrofluid cooled. Built-in automatic power limiting independently protects each driver from unsafe transients. With mounting options that are flexible enough for virtually any application, the
S-40 is perfect for anything from background and foreground music in restaurants and clubs to near-field monitoring in control rooms and broadcast studios.
• Ideal for both distributed and near-field applications
• Designed for indoor and outdoor use
• Direct-radiating polypropylene-cone woofer
• 1" ferrofluid-cooled soft-dome tweeter
• High power-handling, ultra-linear frequency response
• Vented trapezoidal enclosure of high-impact polystyrene
• Passive crossover with power protection for both woofer and tweeter
• Two OmniMount-compatible
0.25" suspension points
FRi-2082
FRi-28LPM DUAL 8" TWO-WAY FULL-RANGE LOUDSPEAKER
This speaker remains one of our most popular choices for speech reinforcement, for underbalcony and on-wall locations in permanent installations, and as a high-quality monitor system. Dual 8" drivers in a tuned enclosure are matched to a 1" titanium compression driver with a
100° x 100° Constant Directivity waveguide.
The FRi-2082 comes with a mounting bracket for horizontal or vertical orientation, while the
FRi-28LPM has non-skid rubber mounting feet to make it more appropriate for stage monitoring.
• Ultra-compact LF-optimized vented enclosure
• 1" HF driver on Constant Directivity waveguide
• 100° H x 100° V coverage pattern
• Low-profile slanted design
• Versatile 45° aiming angle for under-balcony, on-wall and stage monitoring applications
• Mounting bracket included (FRi-2082 only)
• Two 3/8" suspension points
Frequency Response (+/- 3 dB)
Sensitivity (SPL, 1 W @ 1 m)
Max. SPL/1m (calc.)
Power handling (Long-term, Short-term)
Coverage, H x V
Directivity Index
LF Transducer
HF Transducer
Crossover frequencies
Nominal impedance (low Z version)
Minimum impedance (low Z version)
Input connections
Dimensions (H x W at front x D)
Net Weight (including mounting bracket)
S-40
85 Hz – 20 kHz
85 dB
113 dB
120 W, 480 W
100° x 100°
9.8 dB (+3.8/-3.6 dB), 2–20,000 Hz
5.25"
1" softdome
3,500 Hz
4 Ω
3.7 Ω
Spring terminal
9.8" x 7" x 5.9" (249 x 178 x 150 mm)
5.7 lb (2.6 kg)
Frequency Response (- 3dB)
Frequency Range (-10 dB)
Recommended High-Pass Frequency
Axial Sensitivity, Biamp (SPL, 1 W @ 1 m)
Max. SPL /1 m (calc.), full space
Power Handling, Biamp (Continuous, Peak)
Coverage (nominal -6 dB) H x V
LF Transducer
HF Transducer
Crossover Frequency
Nominal Impedance (Biamp)
Input Connections
Dimensions (H x W at front x D)
Net Weight
FRi-2082 & FRi-28LPM
70 Hz – 20 kHz
55 Hz – 16 kHz
50 Hz (12 dB/octave)
93 dB
122 dB
200 W, 800 W
100° x 100° (Const. Dir. waveguide)
Two 8"
1" compression driver
2,800 Hz
8 Ω
Barrier strip
8.75" x 24.5" x 14" (222 x 620 x 356 mm)
40 lb (18.2 kg)
30
See page 50 for S-40 and page 47 for FRi-2082 Rigging and Accessories.
CONCERT MONITORS
Our top-of-the-line floor monitors, originally designed as part of the X-Array touring line.
• Two-way, high-output design
• Vented LF enclosure
• Two symmetrical 55° enclosure angles
• Ultra compact for all-size stages
Xw12A 12" TWO-WAY FLOOR MONITOR
• DL12ST woofer with
Ring-Mode Decoupling for vocal clarity
• 3" ND6-16 titanium/neodymium HF compression driver
• 80° x 55° Constant Directivity waveguide
• Neutrik Speakon paralleled pass-through connectors on each end
• Two integrated handles
Xw15A 15" TWO-WAY FLOOR MONITOR
• EVX155 woofer with
4" voice coil
TOUR X FLOOR MONITORS
• Compact with high output
• Ideal for small-to-medium stages
• Signal Synchronized Transducers™ for woofer/tweeter alignment
• 1.25" DH3/2010A titanium HF compression driver
TX1122FM 12" TWO-WAY FULL-RANGE MONITOR
• Low-distortion SMX2121 woofer with fully symmetric drive
• 99 dB sensitivity, 132 dB maximum SPL
• 90° H x 50° V Constant Directivity waveguide
• Integrated 24 dB/octave crossover with HF protection
• Power handling: 500 W continuous, 2000 W peak
• Black EVCoat finish
TX1152FM 15" TWO-WAY FULL-RANGE MONITOR
• Ultra low-distortion SMX2151 woofer with fully symmetric drive
• 100 dB sensitivity, 133 dB maximum SPL
Frequency Response (-3 dB)
Xw12A
65 Hz – 18 kHz
Xw15A
55 Hz – 18 kHz
Recommended High-Pass Frequency System controller determined System controller determined
Axial Sensitivity (SPL, 1 W @ 1 m),
LF/HF
98/110 dB 99/110 dB
Max. SPL @ 1 m (calc.), full space,
LF/HF
129/135 dB 133/135 dB
600/75 W Long-Term Power Handling, LF/HF 300/75 W
Short-Term Power Handling (peak),
LF/HF
1200/300 W
Coverage (nominal -6 dB) H° x V°
Directivity Index
55° x 80°
(Const. Dir. waveguide)
11.6 dB (+2.3/-2.1 dB)
1,200–16,000 Hz
LF woofer (transducer)
HF throat diameter (transducer)
Crossover Frequencies
12" DL12ST
1.4" ND6-16
Factory preset
2400/300 W
55° x 80°
(Const. Dir. waveguide)
11.6 dB (+3.0/-3.6 dB)
1,200–16,000 Hz
15" EVX155
1.4" ND6-16
Factory preset
Nominal Impedance, LF/HF
Minimum Impedance, LF/HF
Input Connections
Dimensions in floor position
(H x W at front x D)
Net Weight
8 Ω/16 Ω
8.2 Ω/10.5 Ω
2 four-pin Speakon
23" x 17.2" x 12.2"
(534 x 449 x 313 mm)
48 lb (21.9 kg)
8 Ω/16 Ω
7.2 Ω/14.3 Ω
2 four-pin Speakon
25.4" x 18" x 13.4"
(644 x 452 x 340 mm)
62.5 lb (28.4 kg)
See page 40 for Tour X Loudspeakers.
Speaker Type
Frequency Response (-3 dB)
Frequency Range (-10 dB)
Sensitivity (SPL, 1 W/1 m)
Max. SPL/1m (calc)
System Power Handling
(Continuous, Peak)
Coverage(Nominal -6 dB)
LF Transducer
HF Transducer
Internal Crossover
Crossover Frequency
Nominal Impedance (Passive)
Minimum Impedance
Input Connections
Enclosure Material
Flying Suspension
Dimensions (H x W x D)
Net Weight
TX1122FM
Full-range
70 Hz – 20 kHz
55 Hz – 20 kHz
99 d B (1w/1m)
132 dB
500 W, 2000 W
90° H x 50° V
12" SMX2121
1.25" DH3/2010A
Yes
1,600 Hz
8 Ω
6.4 Ω
Parallel Neutrik NL4
Plywood and MDF with
EVCoat
Six 3/8" threaded inserts
17.3" x 14.3" x 22.6"
(440 x 364 x 573 mm)
43.7 lb (19.8 kg)
TX1152FM
Full-range
65 Hz – 20 kHz
45 Hz – 20 kHz
100 dB
133 dB
500 W, 2000 W
90° H x 50° V
15" SMX2151
1.25" DH3/2010A
Yes
1,750 Hz
8 Ω
6.2 Ω
Parallel Neutrik NL4
Plywood and MDF with
EVCoat
Six 3/8" threaded inserts
18.7" x 17.3" x 25.8"
(475 x 439 x 655 mm)
51.9 lb (23.5 kg)
31
32
Designed for top-notch quality with amazing versatility, the
ZX/ZXA series sets a new standard of performance and practicality in sound reinforcement loudspeakers. Featuring high-end components and lightweight molded enclosures, the ZX/ZXA line is at home in any installed or portable application, from commercial sound to clubs, houses of worship, stages, arenas and stadiums. Newly-designed high-power woofers and drivers ensure full-range sound with awesome richness and clarity. Sleek contemporary styling fits in anywhere. Lightweight makes transport easy while enabling a multitude of flying and mounting options that are each supported by innovative mechanical solutions.
Whether for portable use or permanent installation, the
ZX/ZXA series represents the next level in advanced loudspeaker technology.
ZX1 8" TWO-WAY FULL-RANGE COMPOSITE LOUDSPEAKER
• Smooth, wide frequency response
• Ideal for mains, fills or monitors
• Velocity-compensated port for exceptional LF
• Long-excursion weather-treated EV8L woofer
• 1.25" DH2005 titanium HF compression driver
• Rotatable 90º x 50º waveguide for flexible coverage
• Passive crossover with full-band overload protection
• High sensitivity, 123 dB maximum SPL
• Power handling: 200 W continuous, 800 W peak
• High-impact polypropylene enclosure
• Compact monitor-friendly wedge shape
• Integrated pole mount adapter and pocket handle
• Four Metric mounting inserts
• Available in black or white
ZX1i
ZX1-SUB
8" TWO-WAY FULL-RANGE INDOOR/OUTDOOR LOUDSPEAKER
• Install version of the ZX1
• Indoor/outdoor design
• Ideal for installed mains, fills or distributed sound
• Velocity-compensated port for exceptional LF
• Long-excursion weather-treated EV8L woofer
• 1.25" DH2005 titanium HF compression driver
• Choice of 90º x 50º or 100º x 100º rotatable waveguide
• Passive crossover with full-band overload protection
• Also available in 70/100 volt transformer
12" POWERED SUBWOOFER version with Electro-Voice patented ASC
(Automatic Saturation Compensation)
• High sensitivity, 123 dB maximum SPL
• Power handling: 200 W continuous, 800 W peak
• Compact high-impact polypropylene enclosure
• Integrated QuickSAM heavy-duty
Strong-Arm Mounting bracket
• Paintable black or white finish
• 15 mm plywood enclosure, internally braced, with textured paint
• EVS-12S 12" woofer for powerful, engaging bass response
• Pole mount for full-range systems
ZX3 12" TWO-WAY FULL-RANGE LOUDSPEAKER
• Versatile performance for mains, fills or monitors
• DVX3121A woofer with forced-air cooling
• 2" ND2 titanium/neodymium HF driver
• Passive crossover
• Choice of 90º x 50º or 60º x 60º coverage waveguide
• High sensitivity, 131 dB maximum SPL
• Power handling: 600 W continuous, 2400 W peak
• High-impact polypropylene enclosure
• Compact monitor-friendly wedge shape
• Up to four anchor-plate attachments
• Seven M8 mounting inserts
• Integrated handle
• Available in black and white
ZX4
ZX5
ZXA1
ZXA1-SUB
ZX/ZXA
15" TWO-WAY FULL-RANGE LOUDSPEAKER
• Perfect for portable mains and monitors
• EVS15-SF woofer
• 1.25" DH3/2010A titanium HF driver
• Passive crossover
• 90º x 50º coverage waveguide
• High sensitivity, 132 dB maximum SPL
• Power handling: 400 W continuous, 1600 W peak
• Lightweight high-impact polypropylene enclosure
• Wedge shape for monitors at 45° or 55°
• Integrated pole mount adapter and pocket handle
• Mounting via attachment plates or eyebolts
• Black finish
ALL-WEATHER 15" TWO-WAY FULL-RANGE LOUDSPEAKER
• Versatile performance for mains, fills or monitors
• DVX3150A woofer with forced-air cooling
• 2" ND2 titanium/neodymium HF driver
• Switchable biamp or passive crossover operation
• Choice of 90º x 50º or 60º x 60º coverage waveguide
• High sensitivity, 132 dB maximum SPL
• Power handling: 600 W continuous, 2400 W peak
• High-impact polypropylene enclosure
• Wedge shape for monitors at 45° or 55°
• Up to five anchor-plate attachments
• Ten M8 mounting inserts
• Integrated handle
• Available in black or white
POWERED 8" TWO-WAY FULL-RANGE LOUDSPEAKER
• Powered ZX1, ideal for portable and monitor use
• Integrated 800 W 2-channel (biamp) amplifier
• Long-excursion weather-treated EV8L woofer
• 1.25" DH2005 titanium HF compression driver
• Rotatable 90º x 50º waveguide for flexible coverage
• Steep crossover slopes and transducer protection
• 123 dB maximum SPL
• Microphone and line level inputs
• Switchable high-pass filter for use with subwoofer
• Compact wedge-shape enclosure of lightweight impact-resistant polystyrene
• Integrated pole mount adapter and pocket handle
• Four #8-32 suspension points for installation
• Available in black or white
12" POWERED SUBWOOFER
• 15 mm plywood enclosure, internally braced, with textured paint
• EVS-12S 12" woofer for powerful, engaging bass response
• Class D lightweight amplifier
• Pole mount for full-range systems
• Dual XLR inputs and outputs
• Switchable EQ modes for different applications
• LED indicators for power on and limit
ZXA5 POWERED 15" TWO-WAY FULL-RANGE LOUDSPEAKER
• Ideal for both portable and installation use
• Integrated 2-channel amplifier, 1000 W LF, 250 W HF
• DVX3150A woofer with forced-air cooling
• 2" ND2 titanium/neodymium HF driver
• 90º x 50º coverage waveguide
• High sensitivity, 133 dB maximum SPL
• Switchable high-pass filter for use with subwoofer
• PowerCon connector with slave through
• Compact enclosure of high-impact polypropylene
• Wedge shape for monitors at 45° or 55°
• Integrated handle
• Up to five anchor-plate attachments
• Ten M8 mounting inserts
• Available in black or white
See page 51 for ZX/ZXA Rigging and Accessories and page 50 for ZXA1and ZXA1-Sub Covers.
33
ZX/ZXA
34
Speaker Type
Full-range, mid-high, two-way, wedges
Frequency
Response (-3 dB) 60 Hz – 20 kHz
Frequency Range
(-10 dB)
Sensitivity
(SPL, 1 W/1 m)
48 Hz – 20 kHz
94 dB
Max. SPL/1m
(calc)
123 dB
Power Handling
(Continuous, Peak) 200, 800 W
Coverage
(Nominal -6 dB)
90° x 50° rotatable
LF Transducer
HF Transducer
Recommended
High-Pass
Frequency
Nominal Impedance (Passive)
ZX1
8" EV8L
1.25" DH2005
40 Hz
8 Ω
ZX1i
Full-range, mid-high, two-way
60 Hz – 20 kHz
48 Hz – 20 kHz
94 dB
123 dB 127 dB 1,2 131 dB
200, 800 W
90° x 50° rotatable
8" EV8L
400 W Cont., 800 W
Prog., 1600 W Peak
100° x 100° rotatable Omnidirectional
600, 2400 W
90° H x 50° V
60° H x 60° V
12" EVS-12S Woofer 12" DVX3121A
1.25" DH2005 2" ND2
40 Hz
8 Ω
ZX1-SUB
Passive Subwoofer
53–125 Hz 1
42–200 Hz 1
94 dB
8 Ω
ZX3
Full-range
58 Hz – 15 kHz
48 Hz – 20 kHz
97 dB
50 Hz
8 Ω
ZX4
Full-range, mid-high, two-way, wedges
60 Hz – 20 kHz
42 Hz – 20 kHz
100 dB
132 dB
400,1600 W
90° H x 50° V
15" EVS15-SF
1.25" DH3/2010A
42 Hz
8 Ω
ZX5
Full-range, mid-high, two-way, wedges
58 Hz – 18 kHz
39 Hz – 20 kHz
98 dB
132 dB
600, 2400 W
90° H x 50° V
60° H x 60° V
15" DVX3150A
2" ND2
36 Hz
8 Ω
ZXA1 ZXA5
Full-range, powered monitors, powered speakers, two-way, wedges
60 Hz – 20 kHz
(full-range mode)
58 Hz – 18 kHz
48 Hz – 20 kHz
(full-range mode)
50 Hz – 20 kHz
123 dB
90° x 50° rotatable
8" EV8L
1.25" DH2005
36 Hz
133 dB
90° H x 50° V
60° H x 60° V
15" DVX3150A
2" ND2
100 Hz
(user selectable)
ZXA1-SUB
Powered Subwoofer
53–93 Hz 1
44–118 Hz 1
126 dB
700 W
1, 2
Omnidirectional
12" EVS-12S Woofer
Internal Crossover Yes
4-pin Phoenix
Yes
Two NL4
2 conductor SJO cable and gland nut
Parallel Neutrik NL4 Parallel Neutrik NL4
Yes Yes
Switchable biamp or passive crossover
XLR and TRS Combo;
XLR with Independent
Gain
XLR Two XLR Stereo Input
Crossover
Frequency
Minimum
Impedance
Amplifier Power
(RMS)
1.7 kHz
6 Ω
1.7 kHz
6 Ω 7.5 Ω
2 kHz
6.2 Ω
1,500 Hz
6.5 Ω
1,500 Hz
6.5 Ω
1,800 Hz
800 W
1,500 Hz
1250 W
100 Hz
800 W
Power
Requirement
Enclosure Material
Grille
Flying
Outdoor
Color
Dimensions
(H x W x D)
Net Weight
No
No
High-Impact Polystyrene
Polyester Powder Coated,
18 ga Galvanized Steel
Yes
Yes
9-ply, 15 mm plywood, internally braced with textured paint
16 ga Steel with Black
Powder Coat
No
No
Yes
Yes
Yes
No
High-Impact Polystyrene
120V: 95V–132V, 50–60 Hz, 0.6A
230V:190V–264V, 50–60 Hz, 0.4A
Polyester Powder Coated, 18 ga Galvanized Steel
Yes
Yes
No
No
Yes
No
120V: 90V–132V,
50–60 Hz, 1.0A
230V: 190V–264V,
50–60 Hz, 0.6A
9-ply, 15 mm plywood, internally braced with textured paint
16 ga Steel with Black
Powder Coat
No
No
Black Black, white Black Black, white Black Black, white Black Black, white Black
17.98" x 11.12" x 10.38"
(457 x 282 x 264 mm)
17.76" x 11.1" x 10.35"
(451 x 282 x 263 mm)
15.75" x 17.50" x 18.00"
(400 x 444.5 x
457.2 mm)
24.14" x 15.64" x
14.26"
(613 x 397 x 362 mm)
27.01" x 17.52" x 15.98"
(686 x 445 x 406 mm)
27.24" x 17.56" x 16.18"
(692 x 446 x 411 mm)
17.99" x 11.1" x 10.39"
(457 x 282 x 264 mm)
27.24" x 17.56" x
16.18"
(692 x 446 x 411 mm)
15.75" x 17.50" x 18.00"
(400 x 444.5 x
457.2 mm)
18.52 lb (8.4 kg) 18.52 lb (8.4 kg) 43.6 lb (19.8 kg) 43.65 lb (19.8 kg) 44.53 lb (20.2 kg) 48.94 lb (22.2 kg) 19 lb (8.62 kg) 50.49 lb (22.9 kg) 46.0 lb (20.9 kg)
1 Half-Space
2 Typical maximum SPL value at one meter over the usable frequency range, measured with a pink-noise burst signal, using internal signal processing and amplifier driven to peak output.
Known for huge tone, gorgeous low-end and incredible stability at extreme volumes, the EVM12L Classic 12" musical instrument loudspeaker has been a favorite since its introduction in 1983. For an even louder, harder tone there's the EVM-12L Black Label, the official guitar loudspeaker of Zakk Wylde and Black Label Society, which features improved power handling, magnet design and venting. Either way, guitarists and bassists love how tough the EVM12L sounds—and how tough it is. For the world's most punishing players, there's only one guitar speaker line that delivers the goods night after night, tour after tour: the Electro-Voice EVM-12L.
EVM12L Classic WORLD’S GREATEST GUITAR LOUDSPEAKER
• Classic sound with road-ready reliability
• Favorite of guitarists in all styles
• High-performance heavy-duty design
• 200 W Power handling
• Frequency response: 80 Hz – 7 kHz (-10 dB)
• Heavy-duty cast frame for reduced low-frequency flex
• Large 16 lb (7.3 kg) magnet assembly
EVM12L Black Label ZAKK WYLDE SIGNATURE GUITAR SPEAKER
• Official guitar loudspeaker of Zakk
Wylde and Black Label Society
• EVM-12L sound with enhanced magnet design and venting
• 300 W power handling
• Frequency response: 80 Hz – 7 kHz (-10 dB)
• Sensitivity 100 dB
• Large 16 lb (7.3 kg) magnet assembly
Cone Diameter
Coil Diameter
Frequency Range (-10 dB)
Power Handling: Continuous (EIA), Peak
Sensitivity (SPL, 1 W @ 1 m)
Maximum SPL
Efficiency
Impedance
Frame Front Diameter
Magnet Diameter
Overall Depth
Mounting Bolt Circle Diameter
Baffle Cutout Diameter
Net Weight
EVM12L Classic
12" (305 mm)
2.5" (63.5 mm)
80 Hz – 7 kHz
200, 1000 W
100 dB
125 dB
5.9%
8 Ω
12.19" (309.6 mm)
7.5" (190.5 mm)
5.25" (133.4 mm)
11.56" (293.7 mm)
11.06" (281.0 mm)
19 lb (8.6 kg)
EVM12L Black Label
12" (305 mm)
2.5" (63.5 mm)
80 Hz – 7 kHz
300, 1200 W
100 dB
125 dB
5.9%
8 Ω
12.19" (309.6 mm)
7.5" (190.5 mm)
5.25" (133.4 mm)
11.56" (293.7 mm)
11.06" (281.0 mm)
19 lb (8.6 kg)
35
36
The SX series includes some of the most popular loudspeaker designs in history. SX loudspeakers offer the tour-proven performance and reliability for which EV is known. A versatile range of speaker configurations and lightweight enclosures covers applications in commercial sound, pro music, club sound, and performance and sports venues. In live performance, the SX line can handle tasks, such as front-of-house, side fills, delay lines or stage monitors. For installed sound, easy mounting and multiple weather-ready versions provide flexible system configuration for both indoor and outdoor venues. With high power-handling, great coverage, and smooth, consistent frequency response, cost-effective SX loudspeakers are the hard-working, easy-setup solution to your installation and portable system needs.
Sx300E 12" TWO-WAY FULL-RANGE LOUDSPEAKER
• Compact, portable sound reinforcement
• Designed for use alone or in arrays
• Cast-frame DL12BFH woofer
• 1.25" DH3/2010A titanium HF compression driver
• 65° x 65° Constant Directivity waveguide
• Ring-Mode Decoupling (RMD) for increased intelligibility
• Power handling: 300 W continuous, 1200 W peak
• Dual Neutrik Speakon high-current connectors
• Trapezoidal black or white polypropylene enclosure
• Rubber feet and mating sockets for stacking
• Integral handles, pole mount
Sx300PI
Sx300PIX WEATHER-RESISTANT 12" TWO-WAY FULL-RANGE LOUDSPEAKERS
• Sx300 performance with enhanced weather-resistance
• PIX version has multi-tap transformer for 70 or 100 V use
• Ideal for installation, alone or in arrays
• 1.25" DH3/2010A titanium HF compression driver
• 65° x 65° Constant Directivity waveguide
• Ring-Mode Decoupling (RMD) for increased intelligibility
• Power handling: 300 W continuous, 1200 W peak
• Neutrik Speakon (PI) or Phoenix (PIX) connectors
• Trapezoidal enclosure of high-impact polypropylene
• Rubber feet and mating sockets for stacking
• Integral handles, pole socket, suspension points
• Available in black or white
See page 50 for Sx300 and SB122 Rigging and Accessories.
Sx600PI
Sx600PIX WEATHER-RESISTANT DUAL-ELEMENT FULL-RANGE LINE ARRAY
• High output with exceptional outdoor performance
• Ideal for arenas, stadiums and race tracks
• 600 W multi-tap transformer (PIX only) for 70 or 100 V use
• High intelligibility at high SPL (139 dB max)
• Cast-frame 12" DL12BFH woofer
• Neodymium-based 12" ND12A mid-driver
• 2" DH2T titanium HF compression driver
• 65° x 65° Constant Directivity waveguide
• Very high sensitivity (105 dB 1 W / 1 m)
• Power handling: 600 W continuous, 2400 W peak
• Lightweight trapezoidal polypropylene enclosure
• SuperSAM mounting system adjusts 60° V and 180° H
SX
SB122 COMPACT 12" SUBWOOFER
• SB122 performance with enhanced weather-resistance
• Low-pass filter for parallel connection without added amp
• Large vent for enhanced LF output
• Cast-frame EVS12SB long-excursion woofer
• Power handling: 400 W continuous, 1600 W peak
• Parallel Neutrik Speakon high current input connectors
• Strong, composite trapezoidal enclosure
• Pole mount on top for pairing with ZX1
• Integral handle
• Available in black
Frequency Range (-10 dB)
Recommended High-Pass Frequency
Axial Sensitivity, Biamp (SPL, 1 W @ 1 m)
Max. SPL @ 1 m (calc.), full space
Power Handling (Long-term, Short-term), Low Z
Coverage (nominal -6 dB) H x V
Directivity Index (800–16,000 Hz)
LF Transducers
HF Transducer
Crossover Frequencies
Nominal Impedance (non-transformer)
Minimum Impedance (non-transformer)
Input Connections
Dimensions (H x W at front x D)
Net Weight
Sx300 (all)
50 Hz – 20 kHz
Sx600 (all)
70 Hz – 16 kHz
90 Hz
105 dB
SB122
43–200 Hz
40 Hz (12 dB/octave)
99 dB (half space) 99 dB
Low Z: 131 dB
100V: 123 dB
300, 1200 W
65° x 65° (Const. Dir. waveguide)
11.1 dB (+2.4/-4.1 dB)
12" DL12BFH
1.25" DH3/2010A
1,500 Hz
8 Ω
139 dB
600, 2400 W
65° x 65° (Const. Dir. waveguide)
11.3 dB
12" DL12BFH (LF),
12" ND12A (MB)
2" DH2T
1,800 Hz
4 Ω
131 dB (half space)
400, 1600 W
Omnidirectional
12" EVS12SB
80–160 Hz
8 Ω
5.0 Ω 3.5 Ω 6.0 Ω
2 four-pin Speakon SJO cable/gland nut 2 four-pin Speakon
23.07" x 16.89" x 12.28" (586 x 429 x 312 mm) 45.79" x 16.89" x 12.28" (1163 x 429 x 312 mm) 23.07" x 16.89" x 12.28" (586 x 429 x 312 mm)
31.97 lb (14.5 kg)
PIX: 39.0 lb (17.7 kg)
80 lb (36.3 kg) 33 lb (14.6 kg)
37
The QRx series has become the standard for regional sound companies, rental professionals and contractors who want compact high-performance loudspeakers with concert-grade EV components. Covered with rugged
EVCoat, QRx looks great stacked, on poles, as monitors or flown with simple, integrated, L-track rigging points.
Unique, fully-rotable asymmetrical waveguides have a
15-degree downward bias to ensure high-frequency coverage without the need to tilt the enclosure toward the audience. Our powerhouse DH7 large-format driver (3" voice-coil, 1.4" exit) provides the high-frequency engine, while a selection of DL and EVX woofers anchor the low and sub frequencies. The combination of high-level components, unique design and versatility make QRx series one of the best values in the industry.
QRx 112/75 12" TWO-WAY FULL-RANGE LOUDSPEAKER
• Compact with high output
• Ideal for mains (small-to-medium rooms) or monitors
• Cast-frame woofer, vented cabinet for extended LF
• 3" DH7 titanium HF compression driver
• Rotatable 75° x 50° Constant Directivity waveguide
• Asymmetric 10° down-angled coverage
• Externally switchable biamped or passive operation
• High sensitivity, 131 dB maximum SPL (peak)
• Power handling: 300 W continuous, 1200 W peak
• 5-sided 13-ply birch enclosure with monitor slant
• Built-in handles and L-Track rigging
• Black or white
QRx 115/75 15" TWO-WAY FULL-RANGE LOUDSPEAKER
• Compact with high output
• Ideal for mains (small-to-medium rooms) or monitors
• Cast-frame woofer, vented cabinet for extended LF
• 3" DH7 titanium HF compression driver
• Rotatable 75° x 50° Constant Directivity waveguide
• Asymmetric 10° down-angled coverage
• Externally switchable biamped or passive operation
• High sensitivity, 130 dB maximum SPL (peak)
• Power handling: 400 W continuous, 1600 W peak
• 5-sided 13-ply birch enclosure with monitor slant
• Built-in handles and L-Track rigging
• Black or white
QRx 118S COMPACT 18" SUBWOOFER
• Concert-proven high-output performance
• Accurate transient detail
• EVX-180B woofer for superior linear excursion
• High sensitivity, 137 dB maximum SPL (peak)
• Power handling: 600 W continuous, 2400 W peak
• Rectangular 13-ply birch vented enclosure
• Built-in handles and 1 3/8" pole-mount receptacle
• Four threaded T-nuts for casters or dollies
• Black EVCoat finish
38
QRx 153/75 15" THREE-WAY FULL-RANGE LOUDSPEAKER
• Compact with high-level, high-fidelity sound
• Cast-frame DL15ST woofer, vented box for extended LF
• Horn-loaded 8" MF8 midrange driver
• 3" DH7 titanium HF compression driver
• Asymmetric (10° down-angled)
75° H x 50° V coverage
• Biamped operation
• High sensitivity, 130 dB maximum SPL
• Power handling: 400 W continuous, 1600 W peak
• Trapezpoidal (15°/side) 13-ply birch enclosure
• Built-in handles and L-Track rigging
• Black EVCoat finish
QRx 212/75 DUAL 12" TWO-WAY FULL-RANGE LOUDSPEAKER
• Full-range performance with extra-full lows
• Ideal for mains in small-to-medium rooms
• Cast-frame woofer, vented cabinet for extended LF
• 3" DH7 titanium HF compression driver
• Rotatable 75° x 50° Constant Directivity waveguide
• Asymmetric 10° down-angled coverage
• Externally switchable biamped or passive operation
• High sensitivity, 135 dB maximum SPL (peak)
• Power handling: 600 W continuous, 2400 W peak
• Trapezpoidal 13-ply birch enclosure
• Built-in handles and L-Track rigging
• Black or white
QRx
QRx 212H/75
QRx 218S
DUAL 12" TWO-WAY FULL-RANGE LOUDSPEAKER
• Full-range performance with extra-full lows
• Ideal for mains in small-to-medium rooms
• Cast-frame woofer, vented cabinet for extended LF
• 3" DH7 titanium HF compression driver
• Rotatable 75° x 50° Constant Directivity waveguide
• Asymmetric 10° down-angled coverage
• Externally switchable biamped or passive operation
• High sensitivity, 133 dB maximum SPL (peak)
• Power handling: 600 W continuous, 2400 W peak
• Trapezpoidal 13-ply birch enclosure
• Built-in handles and L-Track rigging
• Black or white
COMPACT DUAL 18" SUBWOOFER
• High-level extended LF with concertproven performance
• Accurate transient detail
• Available in Standard and Riggable (L-Track) versions
• EVX-180B woofers for superior linear excursion
• High sensitivity, 139 dB maximum SPL (peak)
• Power handling: 1200 W continuous, 4800 W peak
• Rectangular 13-ply birch vented enclosure
• Built-in handles and sealed pocket wheels (Standard)
• Integrated pole-mount receptacle (Standard)
• Black EVCoat finish
QRx 112/75 QRx 115/75
Frequency Response (-3 dB)
Frequency Range (-10 dB)
75 Hz – 15 kHz
52 Hz – 18 kHz
60 Hz – 15 kHz
45 Hz – 16 kHz
Recommended High-Pass Frequency 45 Hz (12 dB/octave) 45 Hz (12 dB/octave)
Axial Sensitivity (SPL, 1 W @ 1 m)
(Biamp operation)
98 dB Passive
(100/112 dB)
98 dB
(98/110 dB)
Max. SPL @ 1 m (calc.) 131 dB
Power Handling (Continuous, Peak) 350, 1400 W
Power Handling, Biamp: Continuous
Peak
LF 300 W/HF 75 W
LF 1200 W/HF 300 W
Coverage (nominal -6 dB) H x V
75° x 50°
(up 15°, down 35°)
QRx 153/75
50 Hz – 16 kHz
42 Hz – 20 kHz
98/105 dB
—
130 dB 130 dB
450, 1800 W
LF 400 W/HF 75 W
LF 1,600 W/HF 300 W
75° x 50°
(up 15°, down 35°)
LF 400 W/MB-HF 150 W
LF 1600 W/MB-HF 600 W
75° x 50°
(up 15°, down 35°)
QRx 212/75
75 Hz – 16 kHz
52 Hz – 18 kHz
45 Hz (12 dB/octave)
102 dB
(102/112 dB)
135 dB
600, 2400 W
LF 600 W/HF 75 W
LF 2400 W/HF 300 W
75° x 50°
(up 15°, down 35°)
LF Transducer 12" DL12BFH 15" DL15X Two 12" DL12BFH
HF Transducer
Crossover Frequencies (slope in
Biamp mode)
Nominal Impedance (Biamp mode)
Input Connections
Dimensions (H x W at front x D)
Net Weight
1 Half space
3" DH7
1,500 Hz
(24 dB/octave)
8 Ω (8 Ω/8 Ω)
2 Neutrik NL4
26.6" x 15.35" x 14.6"
(675 x 390 x 372 mm)
57.3 lb (26.0 kg)
3" DH7
1,500 Hz
(24 dB/octave)
8 Ω (8 Ω/8 Ω)
2 Neutrik NL4
29.9" x 17.7" x 16.02"
(759 x 450 x 407 mm)
71 lb (32.0 kg)
15" DL15ST
MF: 8" MF8
HF: 3" DH7
1,200 Hz
— (8 Ω/12 Ω)
2 Neutrik NL4
48.8" x 18.4" x 19.09"
(1,240 x 467 x 485 mm)
103.6 lb (47 kg)
3" DH7
1,500 Hz
(24 dB/octave)
4 Ω (4 Ω/8 Ω)
2 Neutrik NL4
38.98" x 15.47" x 14.77"
(990 x 393 x 375 mm)
80 lb (36.5 kg)
QRx 212H/75
75 Hz – 15 kHz
52 Hz – 18 kHz
45 Hz (12 dB/octave)
100 dB Passive
(100/112 dB)
133 dB
600, 2400 W
LF 600 W/HF 75 W
LF 2400 W/HF 300 W
75° x 50°
(up 15°, down 35°)
12" DL12ST
12" DL12BFH
3" DH7
1,200 Hz
(24 dB/octave)
6 Ω (6 Ω/8 Ω)
2 Neutrik NL4
15.5" x 39.0" x 14.9"
(394 x 990 x 378 mm)
84 lb (38 kg)
QRx 118S QRx 218S
45–150 Hz
30–250 Hz
38–125 Hz
31–250 Hz
36 Hz (12 dB/octave) 35 Hz (12 dB/octave)
98 dB
—
102 dB
—
137 dB 1
600, 2400 W
139 dB
1200, 4800 W
Omnidirectional
18" EVX-180B
100 Hz
(24 dB/octave)
8 Ω
2 Neutrik NL4
35.5" x 17.7" x 23.6"
(902 x 450 x 600 mm)
105 lb (47.5 kg)
Omnidirectional
Two 18" EVX-180B
100 Hz
(24 dB/octave)
4 Ω
2 Neutrik NL4
39.96" x 22.05" x 23.7"
(1,015 x 560 x 602 mm)
150 lb (68 kg)
39
TX1181 18" SUBWOOFER
• High-power LF supplement to TX1122 and TX1152
• High-excursion EVS-18S woofer
• 6 dB/octave low-pass filter for parallel connection without added amp
• 100 dB sensitivity, 132 dB maximum SPL
• Power handling: 500 W continuous, 2000 W peak
• Top-side socket for speaker pole
• Six mount points for optional wheel kit
• Braced plywood/MDF enclosure
• Black EVCoat finish
Tour X
40
Tour X brings the engineering excellence and aesthetic design of EV's world-class tour systems to an innovative and exciting series of portable loudspeakers. Combining bold design and breakthrough performance, the Tour
X series is optimized for applications, such as club sound, pro music and concert sound. The line's full-range loudspeakers and monitors utilize either 1.25"
DH3/2010A or 2" ND2 compression drivers, protected by an advanced fourth-order crossover. Rotatable
Constant Directivity waveguides provide coveragepattern flexibility while 12" or 15" SMX woofers deliver high power-handling with high sensitivity. Tour X 18" subwoofers, meanwhile, use high-excursion EVS-18S
LF transducers to ensure plenty of impact with ultralow distortion. For tour-class performance in a portable package that's surprisingly affordable, look no further than
Tour X.
TX1122 12" TWO-WAY FULL-RANGE LOUDSPEAKER
• High-quality sound at high levels
• Excellent pattern control for short-to-medium throw
• Low-distortion SMX2120 woofer with fully symmetric drive
• 1.25" DH3/2010A titanium HF compression driver
• 90° H x 50° V Constant Directivity waveguide
• Advanced fourth-order crossover with HF protection
• 97 dB sensitivity, 130 dB maximum SPL
• Power handling: 500 W continuous, 2000 W peak
• Lightweight trapezoidal plywood/MDF enclosure
• Pole mount for use with subwoofer or stand
• Six 3/8" threaded suspension points
• Black EVCoat finish
TX1152 15" TWO-WAY FULL-RANGE LOUDSPEAKER
• High-output, high-quality sound
• Excellent pattern control for medium throw use
• Low-distortion SMX2151 woofer with fully symmetric drive
• 1.25" DH3/2010A titanium HF compression driver
• 60° x 40° rotatable Constant Directivity waveguide
• Advanced fourth-order crossover with HF protection
• 100 dB sensitivity, 133 dB maximum SPL
• Power handling: 500 W continuous, 2000 W peak
• Lightweight trapezoidal plywood/MDF enclosure
• Pole mount for use with subwoofer or stand
• Six 3/8" threaded suspension points
• Black EVCoat finish
TX2152 DUAL 15" TWO-WAY FULL-RANGE LOUDSPEAKER
• Very high SPL with smooth response
• Ideal as mains for small-to-medium clubs
• Excellent pattern control for medium throw use
• Dual SMX2151 woofers with fully symmetric drive
• 2" ND2 neodymium HF compression driver
• 60° x 40° rotatable Constant Directivity waveguide
• Advanced 6th-order crossover with HF protection
• 103 dB sensitivity, 139 dB maximum SPL
• Power handling: 1000 W continuous, 4000 W peak
• Internally braced trapezoidal plywood/MDF enclosure
• Six 3/8" threaded suspension points
• Black EVCoat finish
TX2181 DUAL 18" SUBWOOFER
• High-power LF supplement to TX2152
• Low-distortion port design
• Two high-excursion EVS-18S woofers
• Use with processor and dedicated amp channel
• 103 dB sensitivity, 138 dB maximum SPL
• Power handling: 1000 W continuous, 4000 W peak
• Six mount points for optional wheel kit
• Braced plywood/MDF enclosure
• Black EVCoat finish
See page 31 for Tour X Floor Monitors.
TX1122 TX1152 TX2152 TX1181 TX2181
Speaker Type
Frequency Response (-3 dB)
Frequency Range (-10 dB)
Sensitivity (SPL, 1 W/1 m)
Max. SPL/1m (calc)
System Power Handling
(Continuous, Peak)
Coverage(Nominal -6 dB)
LF Transducer
HF Transducer
Internal Crossover
Crossover Frequency
Full-range
60 Hz – 20 kHz
45 Hz – 20 kHz
97 dB
130 dB
500, 2000 W
90° H x 50° V
12" SMX2120
1.25" DH3/2010A
Yes
1,750 Hz
Full-range
55 Hz – 20 kHz
40 Hz – 20 kHz
100 dB
133 dB
500, 2000 W
60° x 40° rotatable
15" SMX2151
1.25" DH3/2010A
Yes
1,650 Hz
Full-range
55 Hz – 13 kHz
50 Hz – 18 kHz
103 dB
139 dB
1000, 4000 W
60° x 40° rotatable
Two 15" SMX2151
2" ND2
Yes
1,750 Hz
Subwoofer
50–160 Hz
45–700 Hz
100 dB
132 dB
500, 2000 W
18" EVS-18S
Low-pass filter
Subwoofer
50–160 Hz
40 Hz – 1.5 kHz
103 dB
138 dB
1000, 4000 W
Two 18" EVS-18S
No
Nominal Impedance (Passive) 8 Ω
Minimum Impedance 5.4 Ω
Input Connections
Enclosure Material
Flying Suspension
Parallel Neutrik NL4
8 Ω
5.6 Ω
Parallel Neutrik NL4
4 Ω
3.1 Ω
Parallel Neutrik NL4
8 Ω
7.5 Ω
Parallel Neutrik NL4
4 Ω
2.9 Ω
Parallel Neutrik NL4
Plywood and MDF with EVCoat Plywood and MDF with EVCoat Plywood and MDF with EVCoat Plywood and MDF with EVCoat Plywood and MDF with EVCoat
Dimensions (H x W x D)
Net Weight
Six 3/8" threaded inserts
24.25" x 15.04" x 14.96"
(616 x 382 x 380 mm)
44.53 lb (20.2 kg)
Six 3/8" threaded inserts
30.55" x 17.56" x 17.56"
(776 x 446 x 446 mm)
61.29 lb (27.8 kg)
Six 3/8" threaded inserts
45.43" x 20" x 18.54" in
(1154 x 508 x 471 mm)
94.36 lb (42.8 kg)
30.28" x 17.28" x 23.27"
(769 x 439 x 591 mm)
74.52 lb (33.8 kg)
45.43" x 20" x 27.2"
(1154 x 508 x 691 mm)
123.68 lb (56.1 kg)
41
ETX Powered Loudspeakers
ETX-15P 15" TWO-WAY POWERED
• 15" LF SMX woofer
• 1.25" HF titanium compression driver
• 2000 W Class-D power amplifier with integrated FIR-Drive DSP
• 135 dB peak SPL
ETX-35P 12" THREE-WAY POWERED
• 15" LF SMX woofer
• 6.5" MF driver
• 1.25" HF titanium compression driver
• 2000 W Class-D power amplifier with integrated FIR-Drive DSP
• 136 dB peak SPL
The new ETX Powered Loudspeaker family builds upon the industry-leading innovation and 85-year heritage of
Electro-Voice audio engineering to offer the most advanced professional-grade products for an array of applications.
A versatile high-end choice for live entertainment venues, rental companies, pro musicians and DJs, and installed sound, the family offers technologies from EV concert/touring systems. Three two-way models, a three-way model and two subs are available.
The ETX Powered Loudspeaker family extends the awardwinning industrial design introduced by Electro-Voice in
2013. Inside each low-profile, tour-grade wood enclosure are a range of unique new features that set the family apart, combining intelligent technology and innovative industrial design for spectacular results across all applications. EVengineered high-efficiency transducers and high-powered
Class-D amplifiers, Signal Synchronized Transducers (SST) waveguide design and smart FIR-Drive DSP all work together to provide peerless EV sound quality and precise coverage at the highest SPLs. Designed, engineered, tested and assembled for ultimate reliability by Electro-Voice in the USA.
ETX-10P ETX-12P 10" TWO-WAY POWERED
• 10" LF SMX woofer
• 1.25" HF titanium compression driver
• 2000 W Class-D power amplifier with integrated FIR-Drive DSP
• 134 dB peak SPL
12" TWO-WAY POWERED
• 12" LF SMX woofer
• 1.25" HF titanium compression driver
• 2000 W Class-D power amplifier with integrated FIR-Drive DSP
• 135 dB peak SPL
42
INTELLIGENT TECHNOLOGY, INNOVATIVE DESIGN
• EV’s FIR-Drive utilizes the latest Finite Impulse Response (FIR) filter technology to optimize transducer linearity. Advanced limiter algorithms for independent peak and thermal transducer protection.
• Complete full-function DSP control via a single-knob interface. LCD screen for easy system set-up and monitoring: location/application EQ presets (e.g. tripod, mounted, suspended, live, music, speech), limiter status, input level controls/meters and master volume control to ensure optimal gain structure. Parametric EQ allows for more precise configuration. Subs feature a preset for true cardioid performance.
• EV-patented Signal Synchronized Transducers (SST) waveguide design provides precise and consistent coverage across all system configurations.
Waveguides are custom-designed and optimized per model.
SUPERIOR POWER AND PERFORMANCE
• State-of-the-art components deliver the legendary EV sound quality and reliability the pros trust: 1800 W (subs) and 2000 W (full-range)
Class-D power amplifiers with integrated DSP produce high SPLs utilizing high-sensitivity, low-distortion transducers (including DVX and SMX series woofers and precision DH3-B HF titanium compression drivers).
• Lightweight, ergonomic, durable and compact 18-mm, 13-ply birch plywood enclosures finished with EVCoat. Eight mounting points for permanent installations
(full-range models). Custom die-cast aluminum pole cups, handles and hardware.
ETX-15SP
ETX-18SP
15" POWERED SUBWOOFER
• 15" DVX woofer for maximum punch
• 1800 W Class-D power amplifier with integrated FIR-Drive DSP
• 134 dB peak SPL
• Special DSP preset for true cardioid performance across the full operating bandwidth
• Combo pole cup (insert and threaded) for use with full-range models
• Removable casters
18" POWERED SUBWOOFER
• 18" DVX woofer for maximum punch
• 1800 W Class-D power amplifier with integrated FIR-Drive DSP
• 135 dB peak SPL
• Special DSP preset for true cardioid performance across the full operating bandwidth
• Combo pole cup (insert and threaded) for use with full-range models
• Removable casters
Speaker Type
Frequency Response (-3 dB)
Frequency Range (-10 dB)
Maximum SPL
Low Pass Frequency
Coverage (H x V)
Power Rating
LF Transducer
MB Transducer
HF Transducer
Crossover Frequency
Power Consumption
Connectors
Enclosure
Grille
Suspension
Dimensions (H x W x D)
ETX-10P
Two-way
85 Hz – 20 kHz1
65 Hz – 20 kHz1
134 dB peak3
90° x 60°
2000 W
10" SMX2100
1.25" DH3-B
1700 Hz
21" x 13" x 14"
(526 x 330 x 365 mm)
ETX-12P
Two-way
55 Hz – 20 kHz1
43 Hz – 20 kHz1
135 dB peak3
ETX-15P
Two-way
48 Hz – 20 kHz1
40 Hz – 20 kHz1
135 dB peak3
ETX-35P
Three-way
48 Hz – 20 kHz1
38 Hz – 20 kHz1
136 dB peak3
90° x 60°
2000 W
12" SMX2120
90° x 60°
2000 W
15" SMX2150
60° x 40°
2000 W
15" SMX2151
6.5" EVS-6C
1.25" DH3-B
1600 Hz
1.25" DH3-B
1500 Hz
1.25" DH3-B
700 Hz, 2900 Hz
100–240 V~, 50–60 Hz, 1.6–0.8 A⁴
Two XLR/TRS combo jack and one XLR link output
18 mm, 13-ply birch plywood with EVCoat
16 AWG steel with powdercoat
Eight M10 suspension points
24" x 15" x 16"
(613 x 381 x 400 mm)
27" x 17" x 18"
(691 x 431 x 447 mm)
40" x 18" x 17"
(1023 x 469 x 426 mm)
Dimensions (H x W x D) with casters
Net Weight 44.8 lb (20.3 kg) 52.0 lb (23.6 kg)
1
2
Full space measurement using the music DSP preset.
Half space measurement using the music DSP preset and 150 Hz low pass.
3 Maximum SPL is measured at 1 m using broadband pink noise at maximum output.
⁴ Current rating is ⅛ power.
61.1 lb (27.7 kg) 84.2 lb (38.2 kg)
ETX-15SP ETX-18SP
Subwoofer
37–150 Hz2
32–180 Hz2
134 dB peak3
Subwoofer
33–150 Hz2
28–180 Hz2
135 dB peak3
Adjustable: 80 Hz, 100 Hz, 120 Hz, 150 Hz
1800 W
15" DVX3159A
19" x 23" x 27"
(471 x 576 x 692 mm)
19" x 23" x 32"
(471 x 576 x 825 mm)
91.9 lb (41.7 kg)
1800 W
18" DVX3180A
Two XLR/TRS combo jacks and two XLR link output
22" x 27" x 31"
(550 x 675 x 777 mm)
22" x 27" x 36"
(550 x 675 x 910 mm)
114.2 lb (51.8 kg)
43
Live X Live X
Clear, powerful and musical, the Live X series was born to command the stage for professional music performance.
Available in both powered and passive versions, Live X loudspeakers offer top-quality components in remarkably affordable configurations that put the EV-quality experience within reach for artists, engineers and live-sound businesses. Designed for a wide range of portable sound applications, Live X loudspeakers are housed in hardy stackable enclosures of solid wood, making them lighter than comparable-quality composite or plastic boxes and therefore easier to load, transport and set up. With high output, extended frequency range and high sensitivity,
Live X loudspeakers are clean, flat and hot, making music of all kinds sound its best. The Live X series is serious gear for serious sound.
ELX112 12" TWO-WAY FULL-RANGE
• Compact power for sound reinforcement and stage monitoring
• EVS-12K woofer
• 1.5" DH-1K titanium HF compression driver
• 55 Hz – 20 kHz frequency range
• 90° x 50° coverage-pattern waveguide
• 60° monitor angle
• 132 dB maximum SPL
• Power handling: 250 W continuous, 1000 W peak
• Braced 15 mm plywood enclosure
• Pole mount or stack with Live X subwoofers
• Black textured finish
ELX112P POWERED 12" TWO-WAY FULL-RANGE
• ELX112 performance with self-amplification
• 50 Hz – 20 kHz frequency range
• Lightweight, cool-running 1000 W Class D amp
• Biamped with 24 dB/octave crossover
• Transducer protection
• Bypassable high-pass for external subwoofer
• XLR, TRS and RCA connections
• Versatile gain, mixing and processing controls
• Pre- or post-mix parallel outputs
ELX115 15" TWO-WAY FULL-RANGE
• More power, fuller sound for larger rooms
• EVS-15K woofer
• 1.5" DH-1K titanium HF compression driver
• 50 Hz – 20 kHz frequency range
• 90° x 50° coverage-pattern waveguide
• 60° monitor angle
• 134 dB maximum SPL
• Power handling: 400 W continuous, 1600 W peak
• Braced 15 mm plywood enclosure
• Pole mount or stack with Live X subwoofers
• Black textured finish
ELX115P POWERED 15" TWO-WAY FULL-RANGE
• ELX115 performance with self-amplification
• 44 Hz – 20 kHz frequency range
• Lightweight, cool-running 1000 W Class D amp
• Biamped with 24 dB/octave crossover
• Transducer protection
• Bypassable high-pass for external subwoofer
• XLR, TRS and RCA input connections
• Versatile gain, mixing and processing controls
• Pre- or post-mix parallel outputs
ELX118 18" SUBWOOFER
• Supplemental bass for ELX112 or ELX115
• EVS-18K woofer for extended LF
• 35 Hz – 200 Hz frequency range
• 134 dB maximum SPL
• Power handling: 400 W continuous, 1600 W peak
• Braced 15 mm plywood enclosure
• Stack or pole-mount full-range boxes
• Black textured finish
ELX118P POWERED 18" SUBWOOFER
• ELX118 performance with self-amplification
• EVS-18K woofer for extended LF
• 32 Hz – 130 Hz frequency range
• Lightweight, cool-running 700 W Class D amp
• Selectable normal/boost modes
• XLR and TRS combo input
• XLR parallel output
44
ELX215 DUAL 15" TWO-WAY FULL-RANGE
• High-volume punch and ultra-wide frequency response
• Ideal for mains
• Two EVS-15K woofers for extended LF
• 1.5" DH-1K titanium HF compression driver
• 38 Hz – 20 kHz frequency range
• 90° x 50° coverage-pattern waveguide
• 137 dB maximum SPL
• Power handling: 600 W continuous, 2400 W peak
• Braced 15 mm plywood enclosure
• Black textured finish
See page 50 for Live X Covers.
ELX112
Speaker Type
Full-range, two-way, wedges
Frequency Response (-3 dB) 82 Hz – 18 kHz
Frequency Range (-10 dB) 55 Hz – 20 kHz
Axial Sensitivity (SPL, 1 W/1 m) 94 dB
Max. SPL/1m (calc) 132 dB Half Space
Recommended High-pass
Frequency
System Power Handling
(Continuous, Program, Peak)
45 Hz
250 W Continuous
1000 W Peak
Coverage (Nominal -6 dB)
H x V
Power Rating
LF Transducer
90° x 50°
12" EVS-12K woofer
HF Transducer
Internal Crossover
DH-1K
Yes
Nominal Impedance (Passive) 8 Ω
Input Connections
Woofer Size
Parallel Neutrik NL4
12" (304.8 mm)
Dimensions (H x W x D)
Net Weight
23.9" x 14.25" x 13.39"
(607 x 362 x 340 mm)
35.27 lb (16.0 kg)
ELX112P
Full-range, two-way, wedges
60 Hz – 18 kHz
50 Hz – 20 kHz
132 dB
90° x 50°
1000 W
12" EVS-12K woofer
DH-1K
Yes
8 Ω
XLR, TRS & RCA
12" (304.8 mm)
23.9" x 14.25" x 13.39"
(607 x 362 x 340 mm)
37.04 lb (16.8 kg)
ELX115
Full-range, mid-high, two-way
75 Hz – 18 kHz
50 Hz – 20 kHz
95 dB
134 dB Half Space
40 Hz
400 W Continuous
1600 W Peak
90° x 50°
ELX115P
Full-range, mid-high, two-way
56 Hz – 18 kHz
44 Hz – 20 kHz
134 dB
90° x 50°
ELX118
Subwoofer
50–100 Hz
35–200 Hz
96 dB
134 dB
30 Hz
Omnidirectional
ELX118P
Subwoofer
42–100 Hz
32–130 Hz
134 dB
Omnidirectional
1000 W
15" EVS-15K woofer 15" EVS-15K woofer 18" EVS-18K woofer
DH-1K
Yes
8 Ω
DH-1K
Yes
8 Ω
Parallel Neutrik NL4 XLR, TRS & RCA
15" (381 mm) 15" (381 mm)
Yes
8 Ω
Parallel Neutrik NL4
18" (457.2 mm)
27.87" x 17.01" x 15.04"
(708 x 432 x 382 mm)
48.28 lb (21.9 kg)
27.87" x 17.01" x 15.04"
(708 x 432 x 382 mm)
49.6 lb (22.5 kg)
26.02" x 19.96" x 22.6"
(661 x 507 x 574 mm)
67.46 lb (30.6 kg)
700 W
18" EVS-18K woofer
Yes
8 Ω
XLR, TRS & RCA
18" (457.2 mm)
26.02" x 19.96" x 22.6"
(661 x 507 x 574 mm)
69 lb (31.3 kg)
ELX215
Full-range, mid-high, two-way
62 Hz – 18 kHz
38 Hz – 20 kHz
96 dB
137 dB
35 Hz
600 W Continuous
2400 W Peak
90° x 50°
15" EVS-15K woofer
DH-1K
Yes
4 Ω
Parallel Neutrik NL4
15" (381 mm)
45.43" x 17.01" x 19.72"
(1154 x 432 x 501 mm)
89.73 lb (40.7 kg)
45
Electro-Voice condenses decades of proven pro audio engineering know-how into ZLX, its next generation of high-performance portable loudspeakers. Available in powered and passive 12" and 15" two-way versions, ZLX was designed with a singular goal: to deliver best-in-class performance across every detail. No other comparably priced loudspeaker sounds better or gives you more control over your sound. ZLX powered models match the legendary quality of EV-engineered drivers with a custom-built 1000 W
Class-D amplifier module and feature an LCD display and innovative single-knob DSP control with presets so you can quickly optimize loudspeaker performance according to your performance style and space. Whether used as mains or monitors, ZLX will enhance your gig with incredible sonic impact and intelligibility – the renowned ''EV Sound" the pros trust.
ZLX-12P
ZLX-15P
12" TWO-WAY POWERED LOUDSPEAKER
• Compact and lightweight
• Standout choice for sound reinforcement or stage-monitoring
• 12" woofer for low-end punch in a compact enclosure
• LCD display and one-knob DSP control with presets for precise, speedy set up
• Input level meters and independent amplifier control to ensure optimal gain structure
• Front LED for "power on" and "limit" indication
• 1.5" high-frequency titanium compression driver
• Durable composite construction with innovative hi/lo grip design for easy pole mounting
• Patented split-baffle design for superior drive time alignment
• 1000 W Class-D amplifier
• 126 dB maximum SPL
• 50 Hz – 20 kHz frequency range
15" TWO-WAY POWERED LOUDSPEAKER
• Crisp clean highs and tight, deep lows for larger spaces
• 15" woofer for extended low frequency response
• LCD display and one-knob DSP control with presets for precise, speedy set up
• Input level meters and independent amplifier control to ensure optimal gain structure
• Front LED for "power on" and "limit" indication
• 1.5" high-frequency titanium compression driver
• Durable composite construction with innovative hi/lo grip design for easy pole mounting
• Patented split-baffle design for superior drive time alignment
• 1000 W Class-D amplifier
• 127 dB maximum SPL
• 42 Hz – 20 kHz frequency range
46
LCD DISPLAY AND SINGLE-KNOB DSP CONTROL
VISUAL CONTROL AND MONITORING WITH PRESETS
In the case of the ZLX's uncluttered control panel, less really does mean more. Though the multiple dials and switches on other powered loudspeakers may suggest more functionality, ZLX's powerful DSP engine is accessed by a clean single-knob design with LCD display, and actually offers the most precise control and configuration available at its price point. Use the presets to optimize ZLX according to your application (music, live, speech, club) and your location (pole mount, monitor, install) and hear the difference in seconds. Smart design, straightforward operation.
ZLX-12
ZLX-15
ZLX
12" TWO-WAY PASSIVE LOUDSPEAKER
• 12" woofer for low-end punch in a compact enclosure
• 1.5" high-frequency titanium compression driver
• Durable composite construction with innovative hi/lo grip design for easy pole mounting
• Patented split-baffle design for superior drive time alignment
• 55 Hz – 20 kHz frequency range
• 250 W continuous and 1000 W peak power handling
• 95 dB SPL sensitivity; 125 dB maximum SPL
15" TWO-WAY PASSIVE LOUDSPEAKER
• 15" woofer for extended low frequency response
• 1.5" high-frequency titanium compression driver
• Durable composite construction with innovative hi/lo grip design for easy pole mounting
• Patented split-baffle design for superior drive time alignment
• 44 Hz – 20 kHz frequency range
• 250 W continuous and 1000 W peak power handling
• 96 dB SPL sensitivity; 126 dB maximum SPL
See page 50 for ZLX Covers.
Speaker Type
Frequency Response
Frequency Range
Axial Sensitivity
Max. Measured SPL
Recommended High-pass Frequency
Power Handling
(Continuous, Peak)
Coverage (H x V)
Power Rating
LF Transducer
HF Transducer
Crossover Frequency
Nominal Impedance
Minimum Impedance
Connectors
Enclosure Material
Grille
Dimensions (H x W x D)
ZLX-12P
Two-way, powered
65 Hz – 18 kHz 1
50 Hz – 20 kHz 1
126 dB
90° x 60°
1000 W
12" EVS-12K woofer
DH-1K
ZLX-15P
Two-way, powered
55 Hz – 18 kHz 1
42 Hz – 20 kHz 1
127 dB
90° x 60°
1000 W
15" EVS-15L woofer
DH-1K
Two XLR/TRS combo jack, one 3.5 mm Input and one XLR link output
Polypropylene
18 ga steel with black powder coat
Polypropylene
18 ga steel with black powder coat
24" x 14" x 14"
(610 x 356 x 356 mm)
34.3 lb (15.6 kg)
27" x 17" x 15"
(685 x 423 x 383 mm)
38.0 lb (17.3 kg) Net Weight
1 Using MUSIC DSP preset.
2 Full Space Measurement, will have low frequency extension when mount on floor or wall.
ZLX-12
Two-way, passive
82 Hz – 18 kHz 2
55 Hz – 20 kHz
95 dB
125 dB
40 Hz
250 W Continuous
1000 W Peak
90° x 60°
12" EVS-12K woofer
DH-1K
2.1 kHz
8 Ω
7 Ω
Dual NL4
Polypropylene
18 ga steel with black powder coat
24" x 14" x 14"
(610 x 356 x 356 mm)
32.8 lb (14.9 kg)
ZLX-15
Two-way, passive
56 Hz – 18 kHz 2
44 Hz – 20 kHz
96 dB
126 dB
40 Hz
250 W Continuous
1000 W Peak
90° x 60°
15" EVS-15L woofer
DH-1K
1.7 kHz
8 Ω
7 Ω
Dual NL4
Polypropylene
18 ga steel with black powder coat
27" x 17" x 15"
(685 x 423 x 383 mm)
36.5 lb (16.6 kg)
47
XLC CONCERT/PORTABLE RIGGING
Rigging and Accessories
XLCi INSTALL RIGGING
RIGGING AND ACCESSORIES
XLC215 and XLD B-1 GRID + XLC215 + AGCD + XLD LOUDSPEAKER
XLC Grid
XLC Series
Loudspeaker
XLD281 XLD281 + CBEAM
XLC Button Bar
(Set of 2)
AGCD
Adapter Grid
XLD Series
Loudspeaker
XLC Swing Arm
(Set of 2)
XLD281 XLD281 + DOLLY
Coupler Beam
XLD/XS Dolly (Cover)
Sample Column of (4) XLD281s
XLD/XS Dolly (Base)
(One half of dolly shown in drawing)
48
Front View
XLD281
Enclosures
Side View
B-1 Grid for XLC
(other rigging hardware included with speaker)
XLC and XLVC GROUND STACK KITS
XGS-3
B-2 Grid for XLCi
(other rigging hardware included with speaker)
XGS-4
Xi-1082 UNDER BALCONY/ON-WALL MOUNT
MB-1082: black
FRi-2082 UNDER BALCONY/ON-WALL MOUNT on-wall
The 100° x 100° dispersion angle allows the FRi-2082 to be installed vertically on the wall as well. Mounting bracket comes with
FRi-2082.
49
Rigging and Accessories
EV INNOVATION
Rigging and Accessories
EV INNOVATION ACCESSORIES
EVI-AC ACCESS CARD
EV Innovation Access Card lets you test EVA, EVF or EVH transducers and protection circuitry without disassembling the cabinet.
TK-150 TRANSFORMER KIT
70/100 V transformer kit for EVF and EVH.
EVU-TK60
EVU-CDNL4
TRANSFORMER KIT
60-Watt, 70.7/100-Volt input transformer for EVU systems, with multiple taps.
COVER PLATE KIT
Dual NL4 cover plate for EVU series only.
EVF and EVH Series
VRK-1
HRK AND VRK RIGGING KITS
VRK-2
(HRK not shown)
EVA, EVF AND EVH
GLAND NUT COVER PLATES
CDG
Dual gland nut cover plate
EVA Rigging
EVA modules connect with an integrated internal top-to-bottom metal structure. Hidden by cover panels, this nearly invisible rigging system gives an EVA cluster the aesthetic appeal of an architectural element rather than a loudspeaker system. The rigging system is designed to carry an array with a safety factor of greater than 8:1.
CDNL4
Dual NL4 cover plate
EVA-SG2 (Standard Grid)
For typical tilt angles in 3 and
4 module arrays and pull-up applications in large arrays when extreme angles are required.
Includes one spreader bar.
EVA-EG2 (Extended Grid)
For typical tilt angles in arrays taller than four modules, or extreme angles in arrays of four modules or less. Includes one spreader bar.
EVA-CG (Coupler Grid, not shown)
Connects full-range modules and single 15" subwoofers so that you can fly the subs without increasing trim height.
CSG
Single gland nut cover plate
50
EVI
EVI Series EBK-1 (EYEBOLT KIT)
RECOMMENDED
LOCATION
Contains three 3/8-16 forged shoulder bolts.
EVI-12
EVI-15
REQUIRED
LOCATION
"U" STYLE BRACKET
EVI-15MBB: black
EVI-15MBW: white
"U" STYLE BRACKET
EVI-12MBB: black
EVI-12MBW: white
EVI-28
35º MAX
"U" STYLE BRACKET
35º MAX
EVI-28MBB: black
EVI-28MBW: white
The radius of action is 140°.
EVID
EVID 3.2, EVID 4.2 or EVID 6.2 + AB-ZE
51
52
Rigging and Accessories
S-40
WALL, CEILING OR STAND MOUNT
Note: The thread diameter can be reduced with a standard 5/8" screw adapter for different mic stands.
S-40 MB/B: black
S-40 MB/W: white
Sx300 and SB122
1) 2) 1) MB 100
2) MB 100 + MB 200
Security advice:
When flown by 90° (figure 2), do not use eyebolts only!
Horizontal Cluster 120° (2 systems)
2 x MB 200 + 1 x MB 300 neccessary
Sx300
MB 300 B
SB122
MB 300 W
Array-kit (2 plates)
Array-kit (2 plates) black white
Horizontal Cluster 180° (3 systems)
3 x MB 200 + 2 x MB 300 neccessary
ZX1
ZX1 + TCA-ZX1 ZX1i + AB-ZE
Rigging and Accessories
ZX1 + MP1-B
ZX3 and ZX5
MB3 or MB5 WALL/CEILING MOUNT BRACKET CB5 CLUSTER BRACKET KIT
Wall or Ceiling-Mount
1 x MB 200 neccessary
3/8" quick links neccessary
Eyebolt neccessary
Vertical Cluster
2 x MB 200 neccessary
Live X, ZLX and ZXA1 Covers
Each cover is custom fit with access to the speaker handles
ZLX-BRK ZLX WALL MOUNT BRACKET
For all models
VSA-1 VERTICAL STRONG-ARM MOUNT
VSA-1 using TSA-1
EBK-3 FORGED M8 EYEBOLT KIT
SSK-1 SINGLE-STUD RIGGING KIT HA-3 or HA-5 HANDLE MOUNT ADAPTER
Handle adapter to be used with VSA-1
Bracket sold separately
53
54
Designed for the most demanding applications in both touring and installed sound, EV's ultra-reliable Tour Grade amplifiers offer a unique combination of output power, sonic excellence and high efficiency, all in a compact, lightweight format that's ideal for life on the road. Based on grounded-bridge Class-H topology, Tour Grade amps feature an integrated switch-mode power supply for maximum power per pound, with plenty of headroom to handle transient peaks and low loads. The optional RCM-
26 remote control module adds state-of-the-art IRIS-
Net-controlled DSP, including FIR-Drive loudspeaker optimization, IIR filters, signal routing, level control, dynamics and system supervision. The optional RCM-28 module provides additional DSP options as well as the revolutionary OMNEO Media Networking Architecture for the most demanding applications.
TG5 2000 W PER CHANNEL POWER AMPLIFIER
• High-level touring performance
• Rugged, lightweight package
• 2000 W per channel (2 Ω)
• Grounded-bridge Class-H design
• Switch-mode power supply
• Microprocessor-controlled
• Front LCD panel for operationmode setup and monitoring
• Slot for optional RCM-26 or RCM-28 IRIS-
Net-compatible DSP and control module
• 11-level protection package
• Only 31.4 lb (14.2 kg)
TG7 3500 W PER CHANNEL POWER AMPLIFIER
• High-power performance for top-level tours
• Rugged, lightweight package
• 3500 W per channel (2 Ω)
• Grounded-bridge Class-H design
• Switch-mode power supply
• Microprocessor-controlled
• Front LCD panel for operationmode setup and monitoring
• Slot for optional RCM-26 or RCM-28 IRIS-
Net-compatible DSP and control module
• 11-level protection package
• Only 32 lb (14.5 kg)
TG5 and TG7 rear view
UCC1 REMOTE CONTROL INTERFACE FOR IRIS-NET
• USB-CAN converter for IRIS-Net enabled devices
• Supports up to 100 CAN devices
• Parallel CAN connections on RJ-45 Ethercons
• USB-powered
• XLR jack for audio bus monitoring
• 19" rackmount panel included
• Status LED shows CAN activity and device status
RCM-26
RCM-28
Tour Grade Amplifiers
IRIS-NET REMOTE CONTROL MODULE FOR TOUR GRADE AMPLIFIERS
• Extend Tour Grade performance with powerful DSP functionality
• Advanced FIR-Drive loudspeaker optimization
• High precision load impedance supervision
• Two GPI and two GPO ports
• One-button system test for fast, complete check of connected cables and components
• Pilot tone detection for cable supervision
• Six recallable DSP/configuration presets
• Parallel RJ-45 CAN bus connectors
IRIS-NET REMOTE CONTROL MODULE FOR TOUR GRADE AMPLIFIERS
• OMNEO Media Networking Architecture
• Advanced FIR-Drive loudspeaker optimization
• High precision load impedance supervision
• Two GPI and two GPO ports
• One-button system test for fast, complete check of connected cables and components
• Pilot tone detection for cable supervision
• Dedicated Array EQ and Delay DSP
• Recallable DSP/configuration presets
TG5 TG7
Topology
Impedance
Class-H grounded bridge
2 Ω 4 Ω 8 Ω
Class-H grounded bridge
2 Ω 4 Ω 8 Ω
Continuous Output/Channel (1 kHz, THD 1%) 2000 W 1450 W 850 W 3500 W 2500 W 1500 W
Continuous Output/Channel
(20–20,000 Hz, THD < 0.2%)
Maximum Bridged Output: 4, 8 Ω
Amplifier Gain (Selectable)
Signal-to-Noise Ratio (A-weighted)
Total Harmonic Distortion
109 dB
0.05%
1200 W 600 W
3800 W 2900 W
39, 35 or 32 dB
2100 W 1050 W
41.5, 35 or 32 dB
111 dB
0.05%
7000 W 5000 W
Intermodulation Distortion (SMPTE)
DIM 30
Slew Rate
Analog Inputs
Input Impedance (Balanced)
0.05%
0.02%
30 V/µs
Yes
20 kΩ
0.05%
0.02%
35 V/µs
Yes
20 kΩ
Input Sensitivity (Selectable)
Digital Inputs
A/D Conversion
D/A Conversion
Data Format
0, +6, +7 dBu 0, +6, +9 dBu
Optional (RCM-26 / RCM-28) Optional (RCM-26 / RCM-28)
See RCM-26 / RCM-28 See RCM-26 / RCM-28
See RCM-26 / RCM-28
See RCM-26 / RCM-28
See RCM-26 / RCM-28
See RCM-26 / RCM-28
RCM-26
116 dB
<0.005% (THD+Noise)
RCM-28
120 dB
<0.002% (THD+Noise)
2 audio inputs on internal slot connector, pre-/post-fader selectable
AES3 (AES/EBU) format, XLR In/Thru connectors
24 Bit linear, Sigma-Delta, 128x oversampling
24 Bit linear, Sigma-Delta, 128x oversampling
24 Bit linear A/D and D/A conversion, 48 Bit processing
Internal Processing
Sample Rate
Sample Rate Conversion (SRC)
Network Control (IRIS-Net)
Control Protocol
See RCM-26 / RCM-28
See RCM-26 / RCM-28
See RCM-26 / RCM-28
See RCM-26 / RCM-28
2 DSPs (150 MHz, 300 MIPS)
48 kHz
See RCM-26 / RCM-28 See RCM-26 / RCM-28
Optional (RCM-26 / RCM-28) Optional (RCM-26 / RCM-28) Yes
See RCM-26 / RCM-28 See RCM-26 / RCM-28 CAN Bus
Dual Core DSP, 500 MIPS
48 kHz
32 kHz – 192 kHz internal sample rate converter
IRIS-Net control/OMNEO
OMNEO/OCA
CAN Bus Interface
GPIO Control Port
See RCM-26 / RCM-28
See RCM-26 / RCM-28
See RCM-26 / RCM-28
See RCM-26 / RCM-28
10–500 kbaud, 2x RJ-45 (IRIS-Net Control) Not required because of OCA support
1 x 6-pole Euroblock, 2 control inputs, 2 control outputs, (+5 V, 200 mA /GND)
Yes FIR-Drive
Power Supply
Optional (RCM-26 / RCM-28) Optional (RCM-26 / RCM-28) Yes
100–240 V, 50-60 Hz 100–240 V, 50-60 Hz
Power Consumption 1/8 max. output @ 4 Ω 1000 W
Dimensions (H x W x D)
Net Weight
3.47" x 19" x 20.16"
(88.1 x 482.6 x 512 mm)
31.4 lb (14.2 kg)
1450 W
3.47" x 19" x 20.16"
(88.1 x 482.6 x 512 mm)
32 lb (14.5 kg)
3.33" x 3.17" x 9.06"
(84.7 x 80.4 x 230.3 mm)
0.53 lb (240 g)
3.33" x 3.17" x 9.06"
(84.7 x 80.4 x 230.3 mm)
0.53 lb (240 g)
55
Q Series Amplifiers
56
Building on a legacy of power and performance,
Q Series amps take Electro-Voice’s unique amplifier philosophy to a new level of efficiency and value. The
Q series achieves superb audio performance because it's designed for superior dynamic headroom and transient response, resulting in 30% greater output capability for short-duration signals. High-power Q99 and Q1212 models use sophisticated Class-H topology that dramatically reduces heat and cuts energy consumption by up to 50%, yielding racks that are easier to power and easier to cool. Smaller Q44 and Q66 models are based on the proven Class-AB designs of EV’s referencestandard Precision series. All models incorporate dynamic limiting to prevent dangerous output clipping, as well as extensive protections against thermal damage and electrical malfunction. Combining Class-H innovation with Class-AB sonic excellence and robustness, the compact, affordable
Q Series is the ideal amplifier line for all sizes of clubs, concerts, performance centers and sports venues.
Q44
Q66
Q99
650 W PER CHANNEL POWER AMPLIFIER
• Outstanding value and performance for club and mobile systems
• Dynamic headroom for all real-world applications
• 650 W per channel (2 Ω)
• Class-AB design
• XLR pass-though input connections
• Easy connection to biamped loudspeakers
• Switchable LPN filter for extra tonal fundamentals and "kick"
• Protective low-cut for systems without subwoofers
• Built-in dynamic limiters
• Complete protection package
• 3-stage front-to-rear fans
900 W PER CHANNEL POWER AMPLIFIER
• Outstanding value and performance for clubs, mobile and more
• Dynamic headroom for all real-world applications
• 900 W per channel (2 Ω)
• Class-AB design
• XLR pass-though input connections
• Easy connection to biamped loudspeakers
• Switchable LPN filter for extra tonal fundamentals and "kick"
• Protective low-cut for systems without subwoofers
• Built-in dynamic limiters
• Complete protection package
• 3-stage front-to-rear fans
1250 W PER CHANNEL CLASS-H POWER AMPLIFIER
• High-efficiency power and performance
• Innovative Class-H design
• 1250 W per channel (2 Ω)
• Dynamic headroom for all real-world applications
• XLR pass-though input connections
• Easy connection to biamped loudspeakers
• Switchable LPN filter for extra tonal fundamentals and "kick"
• Protective low-cut for systems without subwoofers
• Built-in dynamic limiters
• Complete protection package
• 3-stage front-to-rear fans
Q44, Q66, Q99 and
Q1212 rear view
Q1212 1800 W PER CHANNEL CLASS-H POWER AMPLIFIER
• Super-efficient power with outstanding performance
• Innovative Class-H design
• 1800 W per channel (2 Ω)
• Dynamic headroom for all real-world applications
• XLR pass-though input connections
• Easy connection to biamped loudspeakers
• Switchable LPN filter for extra tonal fundamentals and "kick"
• Protective low-cut for systems without subwoofers
• Built-in dynamic limiters
• Complete protection package
• 3-stage front-to-rear fans
Q44 Q66 Q99 Q1212
Topology Class-AB
Impedance
Continuous Output Power(1 kHz, THD 1%)
Continuous Output Power(20 - 20,000 Hz, THD
< 0.2%)
Maximum Bridged Output
Amplifier Gain
2 Ω
650 W
32 dB
Frequency Response
Signal-to-Noise Ratio (A-weighted)
Total Harmonic Distortion
Intermodulation Distortion (SMPTE)
DIM 30
Input Impedance (Balanced)
Input Sensitivity
Maximum Input Voltage
Slew Rate
Network Control (IRIS-Net)
Protections
Cooling
Dimensions (H x W x D)
Net Weight
10 Hz – 40 kHz (±1 dB)
106 dB
0.03%
4 Ω
450 W
400 W
1300 W
8 Ω
270 W
200 W
900 W
Class-AB
2 Ω
900 W
32 dB
0.03%
4 Ω
600 W
500 W
1800 W
10 Hz – 40 kHz (±1 dB)
107 dB
8 Ω
380 W
250 W
1200 W
Class-H
2 Ω
1250 W
32 dB
4 Ω
900 W
800 W
2800 W
10 Hz – 40 kHz (±1 dB)
109 dB
0.03%
8 Ω
550 W
400 W
1800 W
Class-H
2 Ω
1800 W
4 Ω
1200 W
1100 W
3600 W
32 dB
10 Hz – 40 kHz (±1 dB)
110 dB
0.03%
0.1%
0.05%
20 kΩ
+2.2 dBu
+21 dBu (8.69 Vrms)
25 V/µs
No
Front-to-rear, 3-stage fans
3.47" x 19.02" x 16.63"
(88.1 x 483 x 421.5 mm)
27.78 lb (12.6 kg)
0.1%
0.05%
0.1%
0.05%
0.1%
0.05%
20 kΩ
+3.1 dBu
+21 dBu (8.69 Vrms)
26 V/µs
20 kΩ
+5.1 dBu
+21 dBu (8.69 Vrms)
27 V/µs
20 kΩ
+6.6 dBu
+21 dBu (8.69 Vrms)
30 V/µs
No No No
Audio limiters, high temperature, DC, HF, back EMF, peak current limiters, inrush current limiters, turn-on delay
Front-to-rear, 3-stage fans
3.47" x 19.02" x 16.59"
(88.1 x 483 x 421.5 mm)
32.63 lb (14.8 kg)
Front-to-rear, 3-stage fans
3.47" x 19.02" x 16.59"
(88.1 x 483 x 421.5 mm)
35.94 lb (16.3 kg)
Front-to-rear, 3-stage fans
3.47" x 19.02" x 16.59"
(88.1 x 483 x 421.5 mm)
39.02 lb (17.7 kg)
8 Ω
750 W
550 W
2400 W
57
Contractor Precision Series amplifiers combine top-quality performance and reliability with innovative designs perfectly tailored to the needs of professional sound installation. Available in 2RU configurations of up to eight channels, CPS amps are compact and efficient to operate, with every detail thought through from the contractor's point of view. For fast installation and setup, each model features Phoenix-type input and output connectors, programmable power-on delay, remote power-on/off, rear-mounted attenuators and switchable high-pass filters.
For worry-free dependability, there's full protection against hazards, such as excessive heat, overloads, shorts, HF,
DC, back EMF and inrush current. And for the ultimate in system control and supervision, the optional RCM-810 module enables the inclusion of CPS amps in IRIS-Net networks of up to 250 devices. Offering exceptional ease, flexibility and audio performance, CPS series is the ideal installation solution for cinema, club sound, commercial sound/life safety, and performance and sports venues.
58
UNIQUE FLEXIBILITY THROUGH VLD
The ability to switch individually the mode of each power amp channel helps the DSA multi-channel power amplifiers to achieve a degree of flexibility never before possible. In low impedance operation (2 Ω, 4 Ω, 8 Ω), each channel can drive up to four 8 Ω loudspeaker cabinets. The output channels can also be paired in bridged mode. Depending upon the application, each channel can be switched individually even in high-impedance (Hi-Z) mode in order to drive 70 Vrms or 100
Vrms loudspeaker lines directly without an output transformer
(Direct Drive). The power output by the DSA multi-channel power amplifiers is (along with its thermal capacity) limited only by their maximum output voltage and maximum output current, which means they can drive any load between 2 and
10 Ω with their rated maximum outputs of 500 W and 1000 W respectively per channel.
A corresponding encoder-circuit is provided on the rear panel. In addition, through VLD (Variable Load
Drive) in combination with a RCM-810 remote control module, it is possible to define freely which output power should be made available at which load in the frame described above in the channel in question: e.g. Channel A = 350 W into 2.6 Ω; Channel B = 500 W into 8 Ω, etc.
CPS 2.4
CPS 2.6
650 W PER CHANNEL POWER AMPLIFIER
• Contractor-friendly performance and reliability
• 650 W per channel (2 Ω)
• Slot for optional RCM-810 module, allowing
IRIS-Net control and monitoring
• Rear-mounted attenuators
• Switchable 50 Hz high-pass filter
• Class-AB design
• Complete protection: thermal, overload, shorts,
HF, DC, back EMF and inrush current
• Phoenix-type input and output connections
• Remote power-on/off contact
• Programmable power-on delay settings
• 3-stage front-to-rear fans
900 W PER CHANNEL POWER AMPLIFIER
• Contractor-friendly performance and reliability
• 900 W per channel (2 Ω)
• Slot for optional RCM-810 module, allowing
IRIS-Net control and monitoring
• Rear-mounted attenuators
• Switchable 50 Hz high-pass filter
• Class-AB design
• Complete protection: thermal, overload, shorts,
HF, DC, back EMF and inrush current
• Phoenix-type input and output connections
• Remote power-on/off contact
• Programmable power-on delay settings
• 3-stage front-to-rear fans
CPS 2.9
CPS 2.12
CPS 4.5
CPS 4.10
CPS 8.5
RCM-810
CPS Contractor Precision Series Amplifiers
CPS 2.4, CPS 2.6,
CPS 2.9 and CPS.12 rear view
1250 W PER CHANNEL CLASS-H POWER AMPLIFIER
• Power and efficiency for installations
• Innovative Class-H design
• 1250 W per channel (2 Ω)
• Slot for optional RCM-810 module, allowing
IRIS-Net control and monitoring
• Rear-mounted attenuators
• Switchable 50 Hz high-pass filter
• Complete protection: thermal, overload, shorts,
HF, DC, back EMF and inrush current
• Phoenix-type input and output connections
• Remote power-on/off contact
• Programmable power-on delay settings
• 3-stage front-to-rear fans
1800 W PER CHANNEL CLASS-H POWER AMPLIFIER
• Power and efficiency for installations
• Innovative Class-H design
• 1800 W per channel (2 Ω)
• Slot for optional RCM-810 module, allowing
IRIS-Net control and monitoring
• Rear-mounted attenuators
• Switchable 50 Hz high-pass filter
• Complete protection: thermal, overload, shorts,
HF, DC, back EMF and inrush current
• Phoenix-type input and output connections
• Remote power-on/off contact
• Programmable power-on delay settings
• 3-stage front-to-rear fans
500 W PER CHANNEL 4-CHANNEL AMPLIFIER
• Four channels in one compact rack-efficient unit
• 500 W per channel
• 70/100 V operation for distributed systems
• Class-D design for optimum efficiency
• Slot for optional RCM-810 module, allowing
IRIS-Net control and monitoring
• IRIS-Net selection of each channel's impedance (2–10 Ω in 0.1 Ω steps)
• Rear-mounted attenuators
• Switchable 50 Hz high-pass filter (Hi-Z mode)
• Complete protection: thermal, overload, shorts,
HF, DC, back EMF and inrush current
• Phoenix-type input and output connections
• Remote power-on/off contact
• Programmable power-on delay settings
• Front-to-rear fans
1000 W PER CHANNEL 4-CHANNEL AMPLIFIER
• Four channels in one compact rack-efficient unit
• 1000 W per channel
• 70/100 V operation for distributed systems
• Class-D design for optimum efficiency
• Slot for optional RCM-810 module, allowing
IRIS-Net control and monitoring
• IRIS-Net selection of each channel's impedance (2–10 Ω in 0.1 Ω steps)
• Rear-mounted attenuators
• Switchable 50 Hz high-pass filter (Hi-Z mode)
• Complete protection: thermal, overload, shorts,
HF, DC, back EMF and inrush current
• Phoenix-type input and output connections
• Remote power-on/off contact
• Programmable power-on delay settings
• Front-to-rear fans
500 W PER CHANNEL 8-CHANNEL AMPLIFIER
• Eight channels in one compact rack-efficient unit
• 500 W per channel
• 70/100 V operation for distributed systems
• Class-D design for optimum efficiency
• Slot for optional RCM-810 module, allowing
IRIS-Net control and monitoring
• IRIS-Net selection of each channel's impedance (2–10 Ω in 0.1 Ω steps)
• Rear-mounted attenuators
• Switchable 50 Hz high-pass filter (Hi-Z mode)
• Complete protection: thermal, overload, shorts,
HF, DC, back EMF and inrush current
• Phoenix-type input and output connections
• Remote power-on/off contact
• Programmable power-on delay settings
• Front-to-rear fans
IRIS-NET REMOTE CONTROL MODULE FOR CPS SERIES AMPLIFIERS
• Enable powerful control and supervision capabilities
• Integrate up to 100 devices in each remote control network, 250 with multiple networks
• Support for 2-, 4- and 8-channel CPS models
• Freely programmable control inputs and outputs
• Load-monitoring for each channel
• Variable Load Drive for independent channel impedance on 4- and 8-channel amps (2–10 Ω in 0.1 Ω steps)
59
60
CPS Contractor Precision Series Amplifiers
Topology
Impedance
Maximum Bridged Output
Amplifier Gain
Frequency Response
Total Harmonic Distortion
Intermodulation Distortion (SMPTE)
DIM 30
Slew Rate
Analog Inputs
Input Impedance (Balanced)
Input Sensitivity
Maximum Input Voltage
Crossover Type
Network Control (IRIS-Net)
CAN Bus Interface
Variable Load Drive (VLD)
Cooling
Dimensions (H x W x D)
Net Weight
CPS 2.4
Class-AB
2 Ω
Continuous Output Power(1 kHz, THD 1%) 650 W
Continuous Output Power(20–20,000 Hz,
THD<0,2%)
32 dB
10 Hz – 40 kHz (±1 dB)
0.03%
4 Ω
450 W
400 W
1300 W
8 Ω
270 W
200 W
900 W
CPS 2.6
Class-AB
2 Ω
900 W
4 Ω
600 W
500 W
1800 W
32 dB
10 Hz – 40 kHz (±1 dB)
0.03%
8 Ω
380 W
250 W
1200 W
CPS 2.9
Class-H
2 Ω
1250 W
4 Ω
900 W
800 W
2800 W
32 dB
10 Hz – 40 kHz (±1 dB)
0.03%
8 Ω
550 W
400 W
1800 W
CPS 2.12
Class-H
2 Ω
1800 W
4 Ω
1200 W
32 dB
10 Hz – 40 kHz (±1 dB)
0.03%
1100 W
3600 W
8 Ω
750 W
550 W
2400 W
0.1%
0.05%
0.05%
0.02%
0.1%
0.05%
0.1%
0.05%
25 V/µs 26 V/µs 27 V/µs 30 V/µs
2, electronically balanced, Phoenix-type 2, electronically balanced, Phoenix-type 2, electronically balanced, Phoenix-type 2, electronically balanced, Phoenix-type
20 kΩ
2.2 dBu (1.0 V)
20 kΩ
+3.1 dBu (1.11 Vrms)
20 kΩ
+5.1 dBu (1.39 Vrms)
20 kΩ
+6.6 dBu (1.66 Vrms)
+21 dBu (8.69 Vrms)
Optional Modules
Optional (RCM-810 card)
Optional (RCM-810 card)
No
Front-to-rear, 3-stage fans
3.47" x 19" x 16.59"
(88.1 x 482.6 x 421.5 mm)
27.8 lb (12.6 kg)
+21 dBu (8.69 Vrms)
Optional Modules
Optional (RCM-810 card)
Optional (RCM-810 card)
No
Front-to-rear, 3-stage fans
3.47" x 19" x 16.59"
(88.1 x 482.6 x 421.5 mm)
32.63 lb (14.8 kg)
+21 dBu (8.69 Vrms)
Modular
Optional (RCM-810 card)
Optional (RCM-810 card)
No
Front-to-rear, 3-stage fans
3.47" x 19" x 16.59"
(88.1 x 482.6 x 421.5 mm)
35.94 lb (16.3 kg)
+21 dBu (8.69 Vrms)
Modular
Optional (RCM-810 card)
Optional (RCM-810 card)
No
Front-to-rear, 3-stage fans
3.47" x 19" x 16.59"
(88.1 x 482.6 x 421.5 mm)
39.0 lb (17.7 kg)
CPS 4.5
CPS 4.10
CPS 8.5
Topology
Impedance/Voltage
Class-D
2 Ω 4 Ω 8 Ω
Class-D
8 Ω VLD 70V/100V 2 Ω 4 Ω 8 Ω
Class-D
8 Ω VLD 70V/100V 2 Ω 4 Ω 8 Ω 8 Ω VLD 70V/100V
Continuous Power/Channel (1 kHz, THD 1%) 500 W 500 W 250 W 500 W 500 W 1000 W 1000 W 500 W 1000 W 1000 W 500 W 500 W 250 W 500 W 500 W
Continuous Power/Channel (20-20,000
Hz, THD < 0.3%)
450 W 450 W 225 W 450 W 450 W 900 W 900 W 450 W 900 W 900 W 450 W 450 W 225 W 450 W 450 W
Maximum Bridged Output
Amplifier Gain
Frequency Response
Signal-to-Noise Ratio, A-weighted (4 Ω) 100 dB
Total Harmonic Distortion
Intermodulation Distortion (SMPTE)
DIM 30
Slew Rate
Analog Inputs
Input Impedance (Balanced)
Input Sensitivity
Maximum Input Voltage
Network Control (IRIS-Net)
CAN Bus Interface
Variable Load Drive (VLD)
Cooling
Dimensions (H x W x D)
Net Weight
1000 W 1000 W
32 dB (Lo-Z), 33 dB (70 V), 36 dB (100 V)
1000 W
15 Hz – 30 kHz
0.05%
0.05%
0.02%
28 V/µs
4, electronically balanced, Phoenix-type
20 kΩ
0 dBu (.775 V)-2 Ω, +3 dBu (1.1 V)-4/8 Ω, +6 dBu
(1.55) 70V/100V
+22 (9.76 Vrms)
Optional (RCM-810 card)
Optional (RCM-810 card)
Yes
Front-to-rear, continuously variable fans
3.47" x 19" x 16.59" (88.1 x 482.6 x 421.5 mm)
24.47 lb (11.1 kg)
2000 W 2000 W
32 dB (Lo-Z), 33 dB (70 V), 36 dB (100 V)
15 Hz – 30 kHz
103 dB
0.05%
0.05%
0.02%
28 V/µs
4, electronically balanced, Phoenix-type
20 kΩ
2000 W
0 dBu (.775 V)-2 Ω, +3 dBu (1.1 V)-4/8 Ω, +6 dBu
(1.55) 70V/100V
+22 (9.76 Vrms)
Optional (RCM-810 card)
Optional (RCM-810 card)
Yes
Front-to-rear, continuously variable fans
3.47" x 19" x 16.59" (88.1 x 482.6 x 421.5 mm)
24.47 lb (11.1 kg)
1000 W 1000 W
32 dB (Lo-Z), 33 dB (70 V), 36 dB (100 V)
1000 W
15 Hz – 30 kHz
100 dB
0.05%
0.02%
28 V/µs
8, electronically balanced, Phoenix-type
20 kΩ
0 dBu (.775 V)-2 Ω, +3 dBu (1.1 V)-4/8 Ω, +6 dBu
(1.55) 70V/100V
+22 (9.76 Vrms)
Optional (RCM-810 card)
Optional (RCM-810 card)
Yes
Front-to-rear, continuously variable fans
3.47" x 19" x 16.59" (88.1 x 482.6 x 421.5 mm)
30.64 lb (13.9 kg)
CPS 4.5 and CPS 4.10 rear view
CPS 8.5 rear view
Compact Precision amplifiers combine outstanding audio performance with the highest-possible reliability and safety to create an ideal high-power solution for touring and rentals. Incorporating an innovative switchmode power supply into Class-H technology, the CP series delivers clean headroom that is far above stated nominal output. This advanced design also results in improved performance-to-weight ratio for easier touring, reduced waste heat for closer rack spacing and reduced power
CP3000S consumption for enhanced energy efficiency. A complete set of protection circuitry guards people and equipment against hazardous conditions, and a rigid, robust chassis, built to the highest precision manufacturing standards, ensures dependable operation on even the most grueling tours. With exceptionally clean power and tour-friendly touches that facilitate fast, flexible setup, Compact
Precision amplifiers fulfill even the most demanding requirements of pro audio touring.
1600 W PER CHANNEL CLASS-H POWER AMPLIFIER
• Advanced high-efficiency Class-H design
• Ideal for demanding concerts and tours
• Exceptional dynamic headroom
• Rugged, compact and lightweight
• 1600 W per channel (2 Ω)
• XLR pass-though input connections
• Easy connection to biamped loudspeakers
• Switch mode power supply
• Built-in dynamic limiters
• Complete protection: thermal, overload, shorts,
HF, DC, back EMF and inrush current
• 3-stage front-to-rear fans
CP4000S
Topology
Impedance
Maximum power (1k Hz; THD <1%)
Rated power (20 Hz–20,000 Hz; THD < 0.2%)
Maximum bridged output (1,000 Hz; < 1% THD)
Frequency Response (-1dB, ref. 1kHz)
Signal-to-noise ratio, A-weighted
Total harmonic distortion
Intermodulation distortion (SMPTE)
Slew rate
Input impedance (balanced)
Crosstalk (at 1,000 Hz)
Dimensions (W x H x D)
Net weight
2100 W PER CHANNEL CLASS-H POWER AMPLIFIER
• High power with advanced Class-H efficiency
• Ideal for demanding concerts and tours
• Exceptional dynamic headroom
• Rugged, compact and lightweight
• 2100 W per channel (2 Ω)
• XLR pass-though input connections
• Easy connection to biamped loudspeakers
• Switch mode power supply
• Built-in dynamic limiters
• Complete protection: thermal, overload, shorts,
HF, DC, back EMF and inrush current
• 3-stage front-to-rear fans
CP3000S
Class-H
2 Ω
1600 W
4 Ω
1100 W
900 W
3200 W
15 Hz – 40 kHz
107 dB
<0.05%
<0.02%
35 V/µs
20 kΩ
<-80 dB
19.02" x 3.47" x 15.12" (483 x 88.1 x 384 mm)
17.97 lb (8.15 kg)
8 Ω
600 W
450 W
2200 W
CP4000S
Class-H
2 Ω
2100 W
4 Ω
1500 W
1200 W
4200 W
15 Hz – 40 kHz
108 dB
<0.05%
<0.02%
35 V/µs
20 kΩ
<-80 dB
19.02" x 3.47" x 15.12" (483 x 88.1 x 384 mm)
19.18 lb (8.70 kg)
8 Ω
900 W
600 W
3000 W
CP3000S and
CP4000S rear view
61
62
The PA Series of commercial power amplifiers is a favorite of installers everywhere for sound reinforcement, background music, paging and public address systems.
Featuring low-distortion amplifier electronics that are bridgeable for flexible power allocation, PA Series amps provide a wide dynamic range with excellent headroom.
An onboard limiter spares both amplifier and speakers from damaging transients, and a comprehensive thermal/electrical protection package ensures long-haul dependability. Equipped with Phoenix-style terminals for fast, easy hookup, PA Series amps are housed in compact, rack-ready 2RU chassis with ample internal airflow and exceptionally quiet multi-stage fans. Models are available in a variety of output powers and channel configurations, several of which provide 70 V/100 V output using lowdistortion transformers. Offering outstanding versatility and long-term reliability, the PA Series is a remarkable value for any installation application.
PA1250T
PA2250T
PA2400T
PA2450L
SINGLE-CHANNEL 250 W POWER AMPLIFIER
• Cool-running, saturation-free power for distributed installations
• Ideal for sound reinforcement, paging and life safety
• 250 W mono for 70 V/100 V lines
• Compact 2RU design
• Stepped rear-panel level attenuation
• Selectable 50 Hz or 300 Hz high-pass filter
• Thermal protection, peak limiting, turn-on delay
• Phoenix-type inputs and outputs
• 3-stage front-to-rear fans
• Integrated rack ears for direct mounting
DUAL 270 W PER CHANNEL POWER AMPLIFIER
• Efficient performance for low impedance or distributed systems
• Ideal for sound reinforcement, paging and life safety
• 250 W per channel for 4 Ω or 70 V/100 V lines
• Bridged mono out for 540 W into 8 Ω
• Compact 2RU design
• Stepped rear-panel level attenuation
• Selectable 50 Hz or 300 Hz high-pass filter
• Thermal protection, peak limiting, turn-on delay
• Phoenix-type inputs and outputs
• 3-stage front-to-rear fans
• Integrated rack ears for direct mounting
DUAL 400 W PER CHANNEL POWER AMPLIFIER
• Efficient performance for low impedance or distributed systems
• Ideal for sound reinforcement, paging and life safety
• 400 W per channel for 4 Ω or 70 V/100 V lines
• Bridged mono out for 860 W into 8 Ω
• Compact 2RU design
• Stepped rear-panel level attenuation
• Selectable 50 Hz or 300 Hz high-pass filter
• Thermal protection, peak limiting, turn-on delay
• Phoenix-type inputs and outputs
• 3-stage front-to-rear fans
• Integrated rack ears for direct mounting
DUAL 450 W PER CHANNEL POWER AMPLIFIER
• Reliable high-quality power for installation
• Ideal for sound reinforcement, paging and life safety
• 450 W per channel for 4 Ω or 70 V/100 V lines
• Bridged mono out for 900 W into 8 Ω
• Compact 2RU design
• Stepped rear-panel level attenuation
• Selectable 50 Hz or 300 Hz high-pass filter
• Thermal protection, peak limiting, turn-on delay
• Phoenix-type inputs and outputs
• 3-stage front-to-rear fans
• Integrated rack ears for direct mounting
PA Series Commercial Power Amplifiers
PA4150L QUAD 150 W PER CHANNEL POWER AMPLIFIER
• Flexible multi-channel power for installation
• Ideal for sound reinforcement, paging and life safety
• 150 W per channel into 4 Ω
• Bridged mode for dual 315 W outputs into 8 Ω
• Compact 2RU design
• Stepped rear-panel level attenuation
• Selectable 50 Hz or 300 Hz high-pass filter
• Thermal protection, peak limiting, turn-on delay
• Phoenix-type inputs and outputs
• 3-stage front-to-rear fans
• Integrated rack ears for direct mounting
Number of Channels
Signal-to-Noise Ratio, A-weighted
Impedance/Voltage
Rated output power
(*rated load) THD <1%, 1 kHz
Rated output power (*rated load) THD
<0.2%, 20 Hz – 20 kHz
Slew rate (V/µs) at 1 kHz
Frequency response -1 dB, ref. 1 kHz
THD @ rated output power
MBW=80 kHz, 1 kHz
IMD-SMPTE 60 Hz, 7 kHz
DIM30 3.15 kHz, 1 5kHz
Input impedance, 20–20,000 Hz
Input sensitivity @ rated output power or voltage, 1 kHz
Crosstalk ref. 1 kHz, @ 10% rated output power
Dimensions (W x H x D)
Net Weight
PA1250T
1
103 dB
70 V/100 V
270 W
PA2250T
2
103 dB
4 Ω 8 Ω
270 W 135 W
PA2400T
2
103 dB
70 V/100 V 4 Ω 8 Ω
270 W 430 W 215 W
250 W
41/61
65 Hz – 20 kHz
<0.1%
<0.1%
<0.1%
>20 kΩ balanced
0 dBu (775 mV)
250 W 125 W
18 18
65 Hz – 40 kHz
<0.1%
<0.1%
<0.1%
>20 kΩ
0 dBu (775 mV)
<-75 dB <-75 dB
19" x 3.5" x 16"
(483 x 88 x 406 mm)
36.34 lb (16.5 kg)
19" x 3.5" x 16"
(483 x 88 x 406 mm)
51.76 lb (23.5 kg)
250 W
41/61
PA2450L
2
104 dB
70 V/100 V 4 Ω
430 W
400 W 200 W
25 25
65 Hz – 40 kHz
<0.1%
<0.1%
<0.1%
>20 kΩ
0 dBu (775 mV)
<-75 dB
19" x 3.5" x 16"
(483 x 88 x 406 mm)
57.27 lb (26 kg)
400 W
46/65
450 W
8 Ω
220 W
400 W 200 W
28 28
<10 Hz – 40 kHz
<0.1%
<0.1%
<0.1%
>20 kΩ
0 dBu (775 mV)
<-75 dB
19" x 3.5" x 16"
(483 x 88 x 406 mm)
36.34 lb (16.5 kg)
PA4150L
4
101 dB
4 Ω
160 W
8 Ω
100 W
150 W 75 W
16 16
<10 Hz – 40 kHz
<0.1%
<0.1%
<0.1%
>20 kΩ
0 dBu (775 mV)
<-75 dB
19" x 3.5" x 16"
(483 x 88 x 406 mm)
39.65 lb (18 kg)
PA1250T rear view
PA2250T and PA2400T rear view
PA4150L rear view
PA2450L rear view
63
64
The NetMax N8000 System Controller is a state-of-the-art digital matrix system offering comprehensive management of all aspects of professional sound reinforcement systems.
Supporting both distributed and central processing, NetMax is a powerful physical complement to EV's IRIS-Net protocol, which gives designers and end-users the industry’s most flexible routing, DSP, and component-level system control and supervision. EQ, crossovers, dynamics, FIR-Drive loudspeaker optimization—NetMax does it all with superior digital fidelity.
Each 2RU NetMax chassis supports up to 1900 MIPS of processing power and up to 32 local audio channels. And with NetMax's modular, field-configurable architecture, every system can be tailored to current needs without being locked out of future expansion. Designed for both installations and touring systems, NetMax is an indispensable tool for concert halls, houses of worship, hotels, casinos, convention centers, sporting arenas and stadiums. Simply put, there's no more powerful, intelligent way to tame the complexity of modern sound systems than NetMax.
N8000
DSP-1
NETMAX 300 MIPS DIGITAL MATRIX CONTROLLER
• Full IRIS-Net supervision, control and scheduling
• Comprehensive 32-channel routing and mixing
• Huge range of DSP filters, EQ, dynamics and delays
• FIR-Drive loudspeaker optimization
• 300 MIPS internal processing
• Up to 1000 MIPS of processing power available per unit
• 115 dB dynamic range for clean, quiet sound
• Internal 48-bit processing for outstanding audio fidelity
• Auto-compiling DSP engine with ultra-low fixed latency
• Modular architecture with hardware expansion slots
• Fully-programmable analog and digital GPIO support
• Support for Ethernet, RS-232, USB and CAN
• CobraNet and Dante audio networking options
N8000 300 MIPS DSP EXPANSION MODULE
• Enhanced DSP power for NetMax controllers
• Adds 300 MIPS computing capacity
• Easy field installation into chassis card slot
• 48-bit signal processing
• Two RAM banks (512 k x 24 bit) for delay lines up to 21.8 seconds
• Double-precision DSP algorithms
• Automatic configuration via IRIS-Net with installation/removal notification
DSP-2 N8000 1500 MIPS DSP EXPANSION MODULE
• Enhanced DSP power for NetMax controllers
• Adds 1500 MIPS computing capacity
• Easy field installation into chassis card slot
• Three additional RAM banks (512 k x 24 bit) for delay lines up to 32.7 seconds
• Double-precision DSP algorithms
• Automatic configuration via IRIS-Net with installation/removal notification
AI-1 NETMAX 8-CHANNEL ANALOG INPUT CARD
• Eight electronically balanced line-level inputs
• Euroblock connectors
• 20 kΩ input impedance
• 117 dB dynamic range for superior sonic quality
• Automatic configuration
• IRIS-Net notification of installation and removal
• On-board DSP (100 MIPS)
NetMax Digital Matrix System
MI-1
DI-1
AO-1
DO-1
CM-1
DM-1
NETMAX 8-CHANNEL ANALOG MIC/LINE INPUT CARD
• Eight electronically balanced mic/line inputs
• Euroblock connectors
• 48 V phantom power
• Mic/line pad, selectable via IRIS-Net
• Gain and level adjustable via IRIS-Net
• Automatic configuration
• IRIS-Net notification of installation and removal
• On-board DSP (100 MIPS)
NETMAX 8-CHANNEL DIGITAL INPUT CARD
• Eight channels of AES/EBU or S/PDIF digital audio
• Four input connectors, Euroblock or TOSLINK optical
• Supports sample rates from 32–192 kHz
• Independent sample rate conversion for each input
• Lock indication LED
• On-board DSP (100 MIPS)
NETMAX 8-CHANNEL ANALOG OUTPUT CARD
• Eight electronically balanced line-level outputs
• Euroblock connectors
• 118 dB dynamic range for superior sonic quality
• 100 Ω output impedance
• Automatic configuration
• IRIS-Net notification of installation and removal
• On-board DSP (100 MIPS)
NETMAX 8-CHANNEL DIGITAL OUTPUT CARD
• Eight channels of AES/EBU digital audio output
• Four Euroblock output connectors
• 48 kHz sample rate
• +21 dBu maximum output level
• Automatic configuration via IRIS-Net with installation/removal notification
• On-board DSP (100 MIPS)
NETMAX COBRANET AUDIO NETWORK MODULE
• Connect NetMax to a CobraNet digital audio network
• Two 100BASE-TX Ethernet interfaces (IEEE
802.3u compatible) for system redundancy
• 100 mbps data transmission rate
• Four serial ports each for input and output for a total of up to 32 ins and 32 outs
• 48 kHz sample rate and 16-, 20- or 24-bit word-length
• Control, monitoring, configuration and firmware updates via Ethernet
• Status LEDs for link, activity, fault and
CobraNet conductor status
NETMAX DANTE AUDIO NETWORK MODULE
• Connect NetMax to a Dante digital audio network
• Transmit up to 32 ins and 32 outs at 48 kHz sample rate and 16-, 20- or 24-bit word-length
• Low latency (typically below 1 ms)
• Two Gigabit Ethernet interfaces for system redundancy
• Status LEDs for each interface
• Dante Zen device-discovery
• Compatible with Dante Virtual Soundcard
TPI-5 5.7" TOUCH PANEL CONTROLLER FOR IRIS-NET SYSTEMS
• Custom control surface design
• Custom graphical user interfaces via IRIS-Net
• Functionality and graphical representation for a wide range of applications
• No fan, no hard disk
• Reliable server technology
• Operates independently or in conjunction with additional
IRIS-Net applications to provide maximum flexibility
• High durability
• Built to industrial standards, ensuring robust and reliable operation in even the most demanding of environments
PWS-4, PWS-6, PWS-C PROGRAMMABLE WALL STATIONS
• Modular standard-mount keypads for NetMax
• Convenient control for volume, source, presets, etc.
• Up to three front units in a wall station
• PWS-C connects front units to CAN bus
• Easy daisy-chaining with included connection wire
• Easy labeling, protected by transparent cover
• Integrated status LEDs
• Button and LED configuration via IRIS-Net
• Customizable button behavior
(momentary, latching or radio)
65
Sound System Processors
Proven in thousands of installations and live applications around the world, EV delivers truly state-of-the-art DSP for today's applications. EV's Dx46 sets the standard for digital loudspeaker controllers, providing 48-bit filter algorithms,
24-bit AD/DA conversion and a dynamic range of 115 dB.
Dx46 TWO-IN/SIX-OUT FIR-DRIVE SOUND SYSTEM PROCESSOR
• IRIS-Net software provides complete control, monitoring and supervision
• FIR-Drive loudspeaker optimization
• Analog and AES/EBU inputs
• Switchable -6 dB pre-A/D converter pad
• 24-bit AD/DA conversion
• 48-bit filter algorithms
• 115 dB dynamic range
• Ethernet and USB data interfaces
• Dedicated array EQ and delay sections
• 4 separate delay sections
• 5 contact closure inputs
• 60 factory presets, 30 user presets
• Unique edit/compare mode for audible parameter adjustment
• Full loudspeaker protection package, including both Peak Anticipation and TEMP limiters
• Editor Software IRIS-Net
DC-One TWO-IN/SIX-OUT SOUND SYSTEM PROCESSOR
• DC-One Editor Software control via USB port
• Analog or AES/EBU Inputs
• Switchable -6 dB pre-A/D converter pad
• 24-bit AD/DA conversion
• 32-bit Floating Point internal processing
• 111 dB dynamic range
• Six predefined operation configurations
• Contact closure interface for remote preset recall
• 60 factory presets, 20 user presets
• Unique edit/compare mode for audible parameter adjustment
• Highly-customizable security settings
66
DC-One Editor Software PC-BASED EDITING SOFTWARE FOR DC-ONE
• Easy connection to DC-One hardware via USB
• Detailed, real-time control and supervision of DC-One hardware
• Intuitive user interface
• State-of-the-art graphics provide detailed, easy-to-understand system overview
• Graphical navigation and block diagrams provide easy access to all functions and DSP sections
• Unique delay adjustment interface positions components as they actually exist in space
• Selective lockout of front-panel access protects settings from tampering
• Available as a free download at www.electrovoice.com
Analog Inputs (Electronically Balanced)
Analog Outputs (Electronically Balanced)
Digital Inputs
Maximum Input Voltage
Nominal Input Voltage
Input Impedance (Balanced)
Maximum Output Voltage
Nominal Output Voltage
Output Impedance (Balanced)
Frequency Response
Dynamic Range
THD+N
A/D Conversion
D/A Conversion
Data Format
Internal Processing
Sample Rate
Control Protocol
Dimensions (H x W x D)
Net Weight
Dx46
Two XLR, Two XLR THRU OUT
Six XLR
XLR AES/EBU (2-channel)
8.7 V/+21 dBu (analog pad not engaged)
1.55 V/+ 6 dBu
10 kΩ
8.7 V/+21 dBu
1.55 V/+6 dBu
50 Ω
20 Hz – 22 kHz (+/-0.5 dB)
116 dB (A-weighted)
<0.002% (band limited 20–20,000 Hz)
24-bit Delta Sigma
24-bit Delta Sigma
24-bit
48-bit double precision
48 kHz
USB, Ethernet
1.74" x 19" x 14"
(44.25 x 482.6 x 355.6 mm)
10.14 lb (4.6 kg)
DC-One
Two XLR, Two XLR THRU OUT
Six XLR
XLR AES/EBU (2-channel)
8.7 V/+21 dBu (analog pad not engaged)
1.23 V/+4 dBu
10 kΩ
8.7 V/+21 dBu
1.23 V/+4 dBu
50 Ω
10 Hz – 22 kHz (±0.5 dB)
111 dB (unweighted, band limited 22–22,000 Hz)
<0.01% (band limited 22–22,000 Hz)
24-bit/Sigma-Delta (linear phase) 128 times oversampling
24-bit/Sigma-Delta 128 times oversampling
24-bit
32-bit floating point
48 kHz
Front-panel USB port
1.74" x 19" x 14"
(44.25 x 482.6 x 355.6 mm)
10.14 lb (4.6 kg)
67
©2014 Bosch Security Systems, Inc. LITPSCAT0214
Headquarters Americas:
Bosch Security Systems, Inc.
12000 Portland Ave South
Burnsville, MN 55337 | USA
Ph: 1 800 289 0096
Fax: 1 800 955 6831 [email protected]

Public link updated
The public link to your chat has been updated.
Advertisement
Key features
- 400 W 2-way 1.0 channels
- Number of drivers: 1 42 - 20000 Hz 8 Ω
- Polystyrene (PS)
- Black