Stern Playboy pinball game User manual

Find-It-In-Front:
Find-It-In-Front:
Dr.
Pinball
Dr.
Pinball Section
Section
The inside cover & the front pages
DR. ¶ thru DR. ¿ covers the basics
Alot of questions get answered here...
The Portals™Service Menu,
Section 3, is your Technical Friend...
http://www.SternPinball.com
2020 Janice Ave., Melrose Park, IL 60160
Your Parts Sales & Technical Support Team
Joe
Blackwell
Susan
White
Patty
Schraps
DIRECTOR,
Parts Sales &
Technical Support
Parts
Sales
MANAGER
Parts
Stockroom
MANAGER
Chas
Siddiqi
Jã
Alfer
Technical
Support
ENGINEER
Technical Support
Documentation
ADMINISTRATOR
Please call us at 1-800-542-5377 or
1-708-345-7700 for Technical Support.
Visit us at our Web Site www.SternPinball.com.
Stern™Pinball, Inc. © 2002
All Rights Reserved.
Printed in the U.S.A.
March 2002 ~ Print Copy:
¯®­¬
SPI PNº:
780-5076-00
)253523(523(5$7,212)3/$<%2<3,1%$//
)2853,1%$//60867%(,167$//('
7KLV*DPHLVHTXLSSHGZLWK6HWVRI3KRWR,QVHUWVLQVWDOOHGRQWKHJDPH
)LQGWKH$GGLWLRQDO3KRWR,QVHUWV.LW63,3DUW1XPEHU
ZLWKWKHVSDUH3KRWR,QVHUWV,QVWUXFWLRQVDQGRWKHU,PSRUWDQW,QIRUPDWLRQ
3OHDVH5HDG$OO&DXWLRQVLQWKLVPDQXDOWRSUHYHQWLQMXU\DQGRUGDPDJHWRSDUWV
New to Portals! The INSTALLS MENU!
Read over Section 3, Chapter 5, Pages 47-50.
Customize your game with ease without having to go through many Adjustments....
You can now FACTORY RESET all Adjustments WITHOUT affecting the AUDITS!
6HOHFW DQ\ ,QVWDOOV
5HVHW DOO $GMXVWPHQWV ,QVWDOOV
New to our Pinball Games?
Don’t forget to go over Section 3, Chapter 1, Portals Service Menu Introduction. If using Diagnostics...very
useful! Got confused? Comments? Questions? Call Technical Support at 800-542-5377 or 708-345-7700 (Option 1).
9%$&.%2;/$<287/2&$7,216)XVHV%ULGJHV5HOD\V520V9
'LVSOD\3RZHU6XSSO\%RDUG
QUICK REFERENCE FUSE CHART
B a c k b o x F u s e s
LOC:
DISPLAY POWER SUPPLY (P.S.) BOARD
F1 3e4A 250v S.B. 90v DC High Voltage Display
LOC:
I / O POWER DRIVER BOARD
F6 7A 250v S.B. 50v DC Primary High Power Coils/Flippers
F7 5A 250v S.B. 20v DC Low Power Coils
F8 5A 250v S.B. 12v DC Logic Power
F9 5A 250v S.B. 12v DC Logic Power
F20 3A 250v S.B. 50v DC Magnet
F21 3A 250v S.B. 50v DC Coils
F22 8A 250v S.B. 18v DC Controlled Lamps
F23 4A 250v S.B. 5v DC Logic
F24 5A 250v S.B. 6.3v AC G.I. Lamps (BRN-WHT to WHT-BRN)
F25 5A 250v S.B. 6.3v AC G.I. Lamps (YEL to WHT-YEL)
F26 5A 250v S.B. 6.3v AC G.I. Lamps (GRN to WHT-GRN)
F27 5A 250v S.B. 6.3v AC G.I. Lamps (VIO to WHT-VIO)
F28 3A 250v S.B. 24v AC Not Used / Spare
C a b i n e t F u s e s
LOC:
SERVICE ( AC) OUTLET BOX ( Ca binet Bot tom)
n/a 8A 250v S.B. 115v AC Main Fuse Line (Domestic or USA)
n/a 5A 250v S.B. 220v AC Main Fuse Line (International)
P l a y f i e l d F u s e s
LOC:
UNDER PLAYFIELD (near Flippe rs)
n/a 3A 250v S.B. 50v DC Rt. Flipper (BLU-YEL RED-YEL)
n/a 3A 250v S.B. 50v DC Lt. Flipper (GRY-YEL RED-YEL)
n/a 3A 250v S.B. 50v DC Upr. Flipper (GRY-YEL RED-YEL)
For locations & more information on fuses, see Sec. 5, Chp. 2.
)RU %DFNER[ &DELQHW *HQHUDO 3DUWV UHYLHZ 6HFWLRQ &KDSWHU 3DUWV ,GHQWLILFDWLRQ /RFDWLRQ 7KH 3LQN 3DJHV
)RU 6FKHPDWLFV DQGRU &RPSRQHQW 3DUWV RQ 3& %RDUGV VKRZQ UHYLHZ
6HFWLRQ &KDSWHU 3ULQWHG &LUFXLW %RDUGV 7KH <HOORZ 3DJHV
F1
&386RXQG%RDUG
SW300
U21 U17
U212
CMOS
RAM
VOICE ROMS
,23RZHU'ULYHU%RDUG
F24 F26
F9 F22 F23
F25F27
G.I.
Relay
F8 F7
B3
B20 BRIDGES B2
&38 6RXQG
%RDUG
,2 3RZHU
'ULYHU
%RDUG
U36
U37
'LVSOD\ &RQWUROOHU %RDUG
‡
U210
CPU/
OPSYS
EPROM
1R)XVHV
Jumper @
W6 must
be present
for 8MB
EPROMs
0RXQWHG EHKLQG WKH 'RW 0DWUL[ 'LVSOD\
6ROHQRLG
([SDQGHU
%RDUG
3x AA
SOUND/
U7 OPSYS
EPROM
B21
*** All BRIDGES rated
35A @ 100v ***
+50v DC High
B1
Current Coils
B2
B3
B20
+18v DC
Illumination
B21
+5v DC Logic
Voltage
F6 F21
ROM
0
B1
F28 F20
1R)XVHV
Inside Coin Door
Playfield Power
Interlock Switch
Volume Control & Service Switches
For operational usage,
see Section 3, Chapter 1,
Portals Service Menu Introduction.
The Display Controller Board
(holds the Display ROM Loc: ROM0)
is positioned behind the 128 X 32
Dot Matrix Display Board.
(Neither board contain Fuses.)
Memory Protect
Switch
Service Outlet
(on Power Box)
Inside Coin Door
On/Off Switch
(Under Pwr. Box)
Playfield Power
Interlock Switch
Memory Protect
Switch
)LQG,W,Q)URQW
'U3LQEDOO
+20v DC Low
Current Coils
+/-12v DC
Sound /
Display / Logic
Int’l.: 5 Amp 250v
Slo-Blo Fuse
INSIDE
INSIDE VIEW
VIEW OF
OF
THE PINBALL
PINBALL CABINET
THE
CABINET
USA: 8 Amp 250v
Slo-Blo Fuse
Transformer on
Cabinet Bottom
'5
:
),1',7,1)5217'U3LQEDOO6HFWLRQ([SODLQHG
The key technical data from various parts of the manual were extracted and combined into the "Find- It-In-Front:
Dr. Pinball Section." This section (pages '5 - ) will assist the technician in locating important technical
information needed to troubleshoot the Pinball Machine. Dr. Pinball is also available in a Flow Chart Help Format
in the Game Display. To access, enter the Portals• Service Menu.
,QVLGH &RLQ 'RRU
: =
??????+RZ,W:RUNV??????
First, the operator / technician must enter the Service Menu Mode
(for a complete description of the Portals• Service Menu and ICONS
Read! Section 3, Chapter 1). To get into the Service Menu Mode,
power-up the game (if not already) and open the Coin Door. On the
Coin Door is the Portals• Service Switch Set (Red, Green & Black
Buttons).
Step 1: Push down the Black "BEGIN TEST" Button. Looking at the
Video Display you will momentarily see the introductory screen
followed by the MAIN MENU.
Step 2: Move through the Menus
by pushing the Red "LEFT"
or Green "RIGHT" Buttons.
Step 3: Select or activate the Icons by pushing the Black "ENTER"
Button.
,I &RLO )ODVKODPS 7HVWLQJ
WKH 3OD\ILHOG 3RZHU ,QWHUORFN
3RUWDOV• 6HUYLFH 6ZLWFK PXVW EH SXOOHG RXW
6ZLWFK 6HW
5HG
*UHHQ
%ODFN
While in the Portals• Service Menu, the Start Button can be used
in lieu of the Black Button; the Left & Right Flipper Buttons can
be used in lieu of the Red & Green Buttons. However, in Switch or
Active Switch Tests only the Red & Green Buttons can be used.
In our Portals• Service Menu, selecting the "DR." Icon
will bring the operator/technician into DR. PINBALL (Flow
Chart Menus), the "on-screen" diagnostic aide. This is a
feature that will allow you to utilize the power of the microprocessor assisting in troubleshooting a problem with the
machine in a Flow Chart format (follow the questions & answer by using the Mini-Icons in the display).
After entering Portals• , the MAIN MENU now appears with the
"DIAG" Icon (GO TO DIAGNOSTICS MENU) flashing; press the
Black "ENTER" Button to activate this ICON. The DIAGNOSTICS MENU now appears with the "SW" Icon (GO TO SWITCH
MENU) flashing; use the Red "LEFT" or Green "RIGHT"
Buttons, until
the "DR." Icon
(DR. PINBALL)
is flashing:
Press the Black "ENTER" Button to activate this ICON. The
DR. PINBALL MENU (Flow Chart Menus) now appears with the
COIL "DR." Icon flashing. Three (3) Icons, Coil "DR.", Switch
"DR." and Lamp "DR." are available for selection. Selecting a
particular Icon will give you a choice of which specific Coil (any
and all coil assemblies such as Flippers, VUKs, Magnets, etc.),
Switch or Lamp Circuit needs to be diagnosed. After selection,
Dr. Pinball will now display a question or a procedure to follow
such as "Does the lamp turn on?" or "Check bridge rectifier
BR-20, if short replace." When Dr. Pinball displays a question or
requests a procedure, Dr. Pinball will expect a response such as
"NO" or "YES". You the operator/technician must respond by
using the Red or Green Buttons to "SELECT" a Mini-Icon and
the Black Button to "ACTIVATE or ENTER" your selection.
For Mini-Icons explanations & details, see the end of Section 3,
Chapter 2, GO TO DIAGNOSTICS MENU, Dr. Pinball.
'5;
)LQG,W,Q)URQW
'U3LQEDOO
',$*1267,&$,'6
If this display flashes, the game is indicating that CMOS RAM memory
(CPU Loc. U212) has been corrupted. This is caused be either failure in
memory (e.g. batteries are dead and/or faulty RAM) or upon installation
of updated version of game code. Opening the Coin Door will initiate a
Factory Restore (Reset), by opening the Memory Protect Switch.
Check battery voltage at VBATT Test Point on the CPU/Sound Bd. (more details in Sec. 5, Chp. 4, PCBs).
This display is shown momentarily during Game Mode or Power-Up to
alert the operator of a coil malfunction (coil doesn’t energize or coil fires
a multiple number of times). OPERATOR ALERT! works by monitoring
any switch activated coil that has the potential to trap a ball when
disabled (e.g. in the Auto Launch, Scoop, Eject, etc.). This alert can also
appear if a switch associated with a coil (e.g. #16 Shooter Lane & #2 Auto Launch) is stuck closed (caused by a
switch jam or stuck ball); the CPU/Sound Board will activate the coil approximately ten times and if the switch
remains closed, the game will report this switch in Technician Alerts & will indicate the following display warning:
If this display flashes (along with an audible sound), the game has
detected faulty switches and/or missing pinballs. To check, enter the
Portals Service Menu System, select the "DIAG" Icon (GO TO
DIAGNOSTICS MENU) from the MAIN MENU and select the "TECH"
Icon (more details in Sec. 3, Chp. 2, GO TO DIAGNOSTICS MENU).
?????????&38',36:,7&+6(77,1*6?????????
Location of Dip Switch [SW300] is on the CPU/Sound Board (Right of CN6, Top Middle)
CPU COUNTRY SETTING:
USA
CPU COUNTRY SETTING:
Austria
Pos.
ON
OFF
CPU COUNTRY SETTING:
Pos.
Australia
ON
CPU COUNTRY SETTING:
OFF
Pos.
ON
Belgium
OFF
CPU COUNTRY SETTING:
Pos.
Canada
OFF
CPU COUNTRY SETTING:
Pos.
Denmark
ON
OFF
CPU COUNTRY SETTING:
Pos.
Finland
ON
OFF
ON
8
9999999
8 88
9
9999
8
9 999999
88
999999
8
8
99 9999
8 8
9 99999
Pos.
ON
OFF
CPU COUNTRY SETTING:
France
Pos.
ON
OFF
CPU COUNTRY SETTING:
Pos.
Germany
ON
CPU COUNTRY SETTING:
OFF
Pos.
Greece
OFF
CPU COUNTRY SETTING:
Pos.
Italy
OFF
CPU COUNTRY SETTING:
Pos.
Netherlands
ON
OFF
CPU COUNTRY SETTING:
Pos.
New Zealand
ON
OFF
ON
ON
99999999
88
9
99999
888
99999
8888
9999
8
999 9999
8
99 99999
8
9999 999
CPU COUNTRY SETTING: Pos.
ON
Norway
OFF
CPU COUNTRY SETTING: Pos.
ON
Portugal
OFF
CPU COUNTRY SETTING: Pos.
Spain
ON
OFF
CPU COUNTRY SETTING: Pos.
Sweden
ON
OFF
CPU COUNTRY SETTING: Pos.
Switzerland
ON
OFF
CPU COUNTRY SETTING: Pos.
UK
ON
OFF
8 8
9 9 9999
8
8
999 999
8
8
9 99 999
88 8
9 9999
88
99
9999
888
9
9999
5206800$5<7$%/(
Dot Matrix Display
Bd. (Back Side)
ROM 0
The Display Controller Board (holds the Display ROM Loc: ROM0)
is positioned behind the 128 X 32 Dot Matrix Display Board.
)LQG,W,Q)URQW
'U3LQEDOO
I.C. NAME
TYPE
BD. NAME
LOC.
PART Nº
Game ROM
Sound EPROM
Display EPROM
Display EPROM
1MB
512K
4MB
N/C
CPU / Sound Bd.
CPU / Sound Bd.
Display Cntlr. Bd.
Display Cntlr. Bd.
U210
U7
ROM 0
ROM 1
965-0367-76
965-0368-76
965-0369-76
N/A
Voice ROM 1
Voice ROM 2
Voice ROM 3
Voice ROM 4
8MB
8MB
8MB
8MB
CPU / Sound Bd.
CPU / Sound Bd.
CPU / Sound Bd.
CPU / Sound Bd.
U17
U21
U36
U37
965-0370-76
965-0371-76
965-0372-76
965-0373-76
For Game, Sound & Voice ROM Locations see '5
X.
'5
Z
,Q 6:,7&+ 0(18
DOVR VHOHFW
$&7,9( DQG
'(',&$7('
6:,7&+ 7(676
6:,7&+0$75,;*5,''(',&$7('6:,7&+(6
D iode O n T erminal S trip :
&ROXPQ
'ULYH
5RZ
5HWXUQ
8
127 86('
:+7%51
&13
8
127 86('
:+75('
&13
8
127 86('
:+725*
&13
8
127 86('
:+7<(/
&13
8
127 86('
:+7*51
&13
8
127 86('
:+7%/8
&13
8
127 86('
:+79,2
&13
8
127 86('
:+7*5<
&13
4
127 86('
*51%51
&13
LEFT
BUTTON
(UK ONLY)
on Cabinet side
4TH
COIN
SLOT
On Coin Door
6TH
COIN
SLOT
On Coin Door
RIGHT
COIN
SLOT
On Coin Door
CENTER
COIN SLOT
/ DBA
On Coin Door
LEFT
COIN
SLOT
On Coin Door
5TH
COIN
SLOT
On Coin Door
RIGHT
BUTTON
(UK ONLY)
on Cabinet side
4
127 86('
*515('
&13
SKILL
SHOT
Under Playfield
RIGHT
ORBIT
Under Playfield
4-BALL
TROUGH #1
(LEFT)
On Assembly
4
127 86('
*5125*
&13
RIGHT
RAMP
ENTER
On Ramp Assy.
RIGHT
RAMP
EXIT
On Ramp Assy.
CENTER
LANE
Under Playfield
NOT
USED
4-BALL
TROUGH #2
On Assembly
4-BALL
TROUGH #3
On Assembly
4-BALL
TROUGH
VUK OPTO
On Assembly
4-BALL
STACKING
OPTO
On Assembly
SHOOTER
LANE
Under Playfield
4
127 86('
*51<(/
&13
POP
BUMPER
EXIT
Under Playfield
DROP
TARGET
On Assembly
LEFT
ORBIT
Under Playfield
SURPRISE
PAKAGE
TARGET
On Assembly
'
2
7 GROTTO
6 EJECT
Under Playfield
NOT
USED
Under Playfield
CENTER
RAMP
EXIT
On Ramp Assy.
LEFT
TOP
LANE
Under Playfield
MIDDLE
TOP
LANE
Under Playfield
TRIANGLE
MECH 1
(RIGHT)
On Assembly
TRIANGLE
MECH 2
(LEFT)
On Assembly
RIGHT
TOP
LANE
Under Playfield
Under Playfield
PEEK-A-BOO
TARGET
On Assembly
VUK
On Assembly
NOT
USED
On Ramp Assy.
On Ramp Assy.
RAMP
BALL
LOCK 3
On Ramp Assy.
RAMP
BALL
LOCK 1
On Ramp Assy.
RAMP
BALL
LOCK 2
On Ramp Assy.
4
127 86('
*51%/8
&13
LEFT
RAMP
ENTER
On Ramp Assy.
4
127 86('
*519,2
&13
LEFT
BUMPER
On Assembly
LEFT
RAMP
EXIT
RIGHT
BUMPER
On Ramp Assy. On Assembly
'
2
7 CENTERFOLD 1 BOTTOM
6 (CLOSED)
BUMPER
On Assembly
On Assembly
TEASE
CENTERFOLD 2 SCREW
(OPEN)
LIMIT
On
Assembly
On Assembly
NOT
USED
NOT
USED
Under Playfield
4
127 86('
*51%/.
&13
NOT
USED
Under Playfield
START
BUTTON
Cabinet Front
NOT
USED
On Assembly
On Assembly
NOT
USED
NOT
USED
TOURNAMENT
BUTTON
Cabinet
Front
NOT
USED
Under Playfield
4
127 86('
*51*5<
&13
On Coin Door
PLUMB
BOB
TILT
Inside Cabinet
LEFT
OUTLANE
Under Playfield
LEFT
RETURN
LANE
Under Playfield
LEFT
SLINGSHOT
On Assembly
RIGHT
OUTLANE
Under Playfield
RIGHT
RETURN
LANE
Under Playfield
RIGHT
SLINGSHOT
On Assembly
NOT
USED
NOT
USED
*1'
,&
8
,13876
*URXQG
%/.
&13 3
8
*5<%51
&13
8
*5<5('
&13
8
*5<25*
&13
8
*5<<(/
&13
8
127 86('
*5<*51
&13
8
*5<%/8
&13
8
*5<9,2
&13
8
*5<%/.
&13
#1 LEFT
FLIPPER
BUTTON
in Cabinet side
#2 LEFT
FLIPPER E.O.S
(End-of-Stroke)
in Cabinet side
#3 RIGHT
FLIPPER
BUTTON
in Cabinet side
#4 RIGHT
FLIPPER E.O.S.
(End-of-Stroke)
in Cabinet side
#5
NOT
USED
in Cabinet side
'6
'6
'6
'6
'6
#6 VOLUME
(RED BUTTON)
(In Test: LEFT)
'6
#7 SERV. CRED.
(GREEN BUTTON)
(In Test: RIGHT)
on Coin Door
'6
#8 BEGIN TEST
(BLACK BUTTON)
(In Test: ENTER)
on Coin Door
'6
on Coin Door
,Q /$03 0(18
DOVR VHOHFW
7(67 $// /$036
52: &2/801
/$03 7(676
/$030$75,;*5,'
D iode O n T erminal S trip :
&ROXPQ
Y
5RZ
*1'
4
127 86('
5('%51
-3
4
127 86('
5('%/.
-3
4
127 86('
5('25*
-3
4
127 86('
5('<(/
-3
4
127 86('
5('*51
-3
4
127 86('
5('%/8
-3
4
127 86('
5('9,2
-3
4
127 86('
5('*5<
-3
4
127 86('
5(':+7
-3
4
127 86('
5('
-3
'5
[
8
127 86('
<(/%51
-3
8
127 86('
<(/5('
-3
JANUARY
#555 Bulb
APRIL
#555 Bulb
#555 Bulb
JULY
#555 Bulb
FEBRUARY
#555 Bulb
MAY
AUGUST
#555 Bulb
OCTOBER
#555 Bulb
BUNNY
#1 (BOTTOM)
#555 Bulb
MIDDLE
TOP LANE
#555 Bulb
NOT
USED
#555 Bulb
MAGAZINE
'276
3&4
#555 Bulb
NOT
USED
#555 Bulb
8
127 86('
<(/25*
-3
MARCH
#555 Bulb
JUNE
#555 Bulb
SEPTEMBER
#555 Bulb
NOVEMBER
#555 Bulb
BUNNY
#2
#555 Bulb
RIGHT
TOP LANE
#555 Bulb
SPLASH
(RT RAMP)
#555 Bulb
DOUBLE
JACKPOT
#555 Bulb
NOT
USED
#555 Bulb
CTRFOLD SPOTLITE STRIP POKER
'276 (LT RAMP) '276
(LT #2)
#555 Bulb
#555 Bulb
DECEMBER
#555 Bulb
BUNNY
#3
#555 Bulb
PHOTO SHOOT
(CENTER)
#555 Bulb
PHOTO SHOOT
(RT ORBIT)
#555 Bulb
JACKPOT
#555 Bulb
PEEK-A-BOO
1&2
#555 Bulb
COLLECT PLAY'276
MATES
#555 Bulb
8
127 86('
<(/%/.
-3
8
127 86('
<(/*51
-3
8
127 86('
<(/%/8
-3
8
127 86('
<(/9,2
-3
MANSION
1 (LT)
#555 Bulb
LEFT
OUTLANE
#555 Bulb
PHOTO SHOOT
(LT ORBIT)
#555 Bulb
SURPRISE
PACKAGE
#555 Bulb
BUNNY
#4
#555 Bulb
EXTRA
BALL
#555 Bulb
BUNNY
(RT ORBIT)
#555 Bulb
NOT
USED
#555 Bulb
PEEK-A-BOO
3
#555 Bulb
MANSION
2
#555 Bulb
LEFT
RETURN LANE
#555 Bulb
BUNNY
(LT ORBIT)
#555 Bulb
MANSION
3
#555 Bulb
RIGHT
RETURN LANE
#555 Bulb
PHOTO SHOOT
(LT RAMP)
#555 Bulb
DROP
TARGET
#555 Bulb
BUNNY
#10
#555 Bulb
PAJAMA PARTY
HURRY-UP
#555 Bulb
JACKPOT
HURRY-UP
#555 Bulb
NOT
USED
#555 Bulb
TEASE
#555 Bulb
BUNNY
#5
#555 Bulb
GROTTO
ARROW
#555 Bulb
PHOTO SHOOT
(VUK)
#555 Bulb
NOT
USED
#555 Bulb
CTRFOLD SPOTLITE
PEEK-A-BOO
'276
(RT #1)
4
#555 Bulb
#555 Bulb
CTRFOLD SPOTLITE CTRFOLD SPOTLITE LEFT
'276 BUMPER
'276
(LT #1)
'276 (RT #3)
#555 Bulb
#555 Bulb
#555 Bulb
MANSION
4 (RT)
#44 Bulb
RIGHT
OUTLANE
#555 Bulb
SPLASH
(LT RAMP)
#555 Bulb
8
127 86('
<(/*5<
-3
SHOOT
AGAIN
#555 Bulb
PEEK-A-BOO
#555 Bulb
MULTIBALL
#555 Bulb
NOT
USED
#555 Bulb
MYSTERY
#555 Bulb
SPECIAL
#555 Bulb
NOT
USED
#555 Bulb
CTRFOLD SPOTLITE
'276
(RT #2)
#555 Bulb
RIGHT & BOTTOM
BUMPERS
#555 Bulb
'276
JACKPOT
(LT RAMP)
#555 Bulb
PAJAMA PARTY
MULTIBALL
#555 Bulb
LEFT
TOP LANE
#555 Bulb
PHOTO SHOOT
(RT RAMP)
#555 Bulb
MAGAZINE
'276
1&2
#555 Bulb
NOT
USED
#555 Bulb
START
BUTTON
#555 Bulb
TOURNAMENT
BUTTON
#555 Bulb
)LQG,W,Q)URQW
'U3LQEDOO
6:,7&+ 0$75,; *5,' /2&$7,216
/$03 0$75,; *5,' /2&$7,216
'6
'6
'6
Legend Note:
'6
= Switches/Lamps mounted above P/F.
7<3,&$/ 6:,7&+ 6&+(0$7,&
= Switches/Lamps mounted below the P/F.
'(',&$7(' 6:,7&+ 6&+(0$7,&
= ...mounted on Cabinet.
7<3,&$/ /$03 6&+(0$7,&
-XXX
-XXX
Note: All Switch, Lamp & Coil assemblies require diodes. Some diodes are located under the playfield on Terminal Strips or Diode Boards and not on the assemblies. D iode O n T erminal S trip or D iode O n D iode B oard
'U3LQEDOO
)LQG,W,Q)URQW
'5
\
,Q &2,/ 0(18
DOVR VHOHFW
&<&/,1*
&2,/
7(67
+LJK &XUUHQW &RLOV *URXS &2,/6'(7$,/('&+$577$%/(
Drive Transistor (D.T.)
Driver
Ouput Board
D.T. Control
Line Color
D.T. Control
Line Connect
Power
Line Color
Power Line
Connnection
Power
Voltage
#1
TROUGH UP-KICKER
Q1
I/O Pwr. Drvr. BRN-BLK
J8-P1
YEL-VIO
J10-P4/5 50v DC
#2
AUTO LAUNCH
Q2
I/O Pwr. Drvr. BRN-RED
J8-P3
YEL-VIO
J10-P4/5 50v DC
#3
BALL LOCK POST
Q3
I/O Pwr. Drvr. BRN-ORG
J8-P4
BRN
J7-P1
20 v DC
#4
LEFT ORBIT POST
Q4
I/O Pwr. Drvr. BRN-YEL
J8-P5
BRN
J7-P1
20 v DC
#5
DROP TARGET
Q5
I/O Pwr. Drvr. BRN-GRN
J8-P6
YEL-VIO
#6
CENTER LANE POST
Q6
I/O Pwr. Drvr. BRN-BLU
J8-P7
BRN
#7
BEAD SCREEN LEFT
Q7
I/O Pwr. Drvr. BRN-VIO
J8-P8
YEL-VIO
J10-P4/5 50v DC
#8
BEAD SCREEN RIGHT
Q8
I/O Pwr. Drvr. BRN-GRY
J8-P9
YEL-VIO
J10-P4/5 50v DC
D.T. Control
Line Connect
Power
Line Color
+LJK &XUUHQW &RLOV *URXS #9
Drive Transistor (D.T.)
LEFT BUMPER
Driver
Ouput Board
D.T. Control
Line Color
J10-P4/5 50v DC
J7-P1
Power Line
Connnection
20 v DC
Power
Voltage
Q9
I/O Pwr. Drvr. BLU-BRN
J9-P1
YEL-VIO
J10-P4/5 50v DC
#10 RIGHT BUMPER
Q10
I/O Pwr. Drvr. BLU-RED
J9-P2
YEL-VIO
J10-P4/5 50v DC
#11 BOTTOM BUMPER
Q11
I/O Pwr. Drvr. BLU-ORG
J9-P4
YEL-VIO
J10-P4/5 50v DC
#12 GROTTO EJECT
Q12
I/O Pwr. Drvr. BLU-YEL
J9-P5
YEL-VIO
J10-P4/5 50v DC
#13 VUK
Q13
I/O Pwr. Drvr. BLU-GRN
J9-P6
YEL-VIO
J10-P4/5 50v DC
#14 MAGAZINE POST
Q14
I/O Pwr. Drvr. BLU-BLK
J9-P7
#15 LEFT FLIPPER (50v RED/YEL)
Q15
I/O Pwr. Drvr. ORG-GRY
J9-P8
#16 RIGHT FLIPPER (50v RED/YEL)
Q16
I/O Pwr. Drvr.
ORG-VIO
J9-P9
BRN
J7-P1
20v DC
RED-YEL J10-P1/2 50v DC
GRY-YEL
RED-YEL J10-P1/2 50v DC
BLU-YEL
Drive Transistor (D.T.)
Driver
Ouput Board
D.T. Control
Line Color
D.T. Control
Line Connect
Power
Line Color
Power Line
Connnection
Power
Voltage
/RZ &XUUHQW &RLOV *URXS #17 LEFT SLINGSHOT
#18 RIGHT SLINGSHOT
#19 DROP SCREEN STEPPER #1
#20 DROP SCREEN STEPPER #2
#21 DROP SCREEN STEPPER #3
%$
%$
%$
#22 TRIANGLE BILLBOARD
#23 DROP SCREEN STEPPER #4
%$
#24 OPTIONAL COIN METER
Coil GA-Turn
or Bulb Type
26-1200
090-5044-00T
23-700
090-5022-00T
27-1500
090-5004-00T
26-1200
090-5044-00T
27-1500
090-5004-00B
26-1200
090-5044-00T
26-1200
090-5044-00T
26-1200
090-5044-00T
Coil GA-Turn
26-1200
090-5044-00T
26-1200
090-5044-00T
26-1200
090-5044-00T
26-1200
090-5044-00T
26-1200
090-5044-00T
24-940
090-5036-00B
23-1100
090-5030-00T
23-1100
090-5030-00T
Coil GA-Turn
or Meter #
23-800
Q17
I/O Pwr. Drvr. VIO-BRN
J7-P2
BRN
J7-P1
20v DC
Q18
I/O Pwr. Drvr. VIO-RED
J7-P3
J7-P1
20v DC
Q19
I/O Pwr. Drvr.
RED
J7-P4
J16-P3
Q20
I/O Pwr. Drvr.
GRN
J7-P6
Mtr.
20v DC Stepr.
041-5062-00
20v DC Stepr. Mtr.
Q21
I/O Pwr. Drvr.
BLK
J7-P7
Q22
I/O Pwr. Drvr. VIO-BLU
J7-P8
Q23
I/O Pwr. Drvr.
J7-P9
Q24
I/O Pwr. Drvr. VIO-GRY
J7-P10
BRN
GRY-RED
to WHT
GRY-RED
to WHT
GRY-RED
to WHT
BRN
GRY-RED
to WHT
RED
J16-P7
D.T. Control
Line Connect
Power
Line Color
Power Line
Connnection
Power
Voltage
BLU
J16-P3
J16-P3
J7-P1
J16-P3
090-5001-00T
23-800
090-5001-00T
041-5062-00
Mtr.
20v DC Stepr.
041-5062-00
Relay
Bd.
20v DC
520-5010-00
Mtr.
20v DC Stepr.
041-5062-00
5 v DC Meter 5v
091-5000-00
D iode O n T erminal S trip (if noted)
/RZ &XUUHQW &RLOV *URXS Drive Transistor (D.T.)
Driver
Ouput Board
D.T. Control
Line Color
Bulb Type
#89 Bulb
#25 FLASH: TRIANGLE X1
Q25
I/O Pwr. Drvr. BLK-BRN
J6-P1
ORG
J6-P10
20v DC
#26 FLASH: MIRROR X4
Q26
I/O Pwr. Drvr. BLK-RED
J6-P2
ORG
J6-P10
Bulb
20v DC #906
165-5004-00
20 v DC #906 Bulb
165-5000-89
#27 FLASH: BACK LT X1 BACK RT X1
Q27
I/O Pwr. Drvr. BLK-ORG
J6-P3
ORG
J6-P10
#28 FLASH: LT SLINGSHOT X1
Q28
I/O Pwr. Drvr. BLK-YEL
J6-P4
ORG
J6-P10
#29 FLASH: RT SLINGSHOT X1
Q29
I/O Pwr. Drvr. BLK-GRN
J6-P5
ORG
J6-P10
Bulb
20v DC #906
165-5004-00
20 v DC #906 Bulb
#30 FLASH: TRIPLE JACPOT X1
Q30
I/O Pwr. Drvr. BLK-BLU
J6-P6
ORG
J6-P10
20v DC
#31 CENTERFOLD ON/OFF
Q31
I/O Pwr. Drvr. BLK-VIO
J6-P7
BRN
J7-P1
Relay
20v DC DC
520-5066-00
(Motor)
20v DC
165-5004-00
165-5004-00
Q32
I/O Pwr. Drvr. BLK-GRY
J6-P8
BRN
J7-P1
#32 CENTERFOLD OPEN/CLOSE
1RWH ,Q 7HVW )ODVK /DPSV 0HQX )ODVK ,FRQ )ODVKHUV WHVWHG DUH DOO )ODVK /DPSV ORFDWHG EHWZHHQ 44 7KLV *DPH 44
$X[LOOLDU\ 8. 21/<
Drive Transistor (D.T.)
AUX 1: LEFT UP/DOWN POST
Q1
AUX 2: CENTER UP/DOWN POST
Q2
AUX 3: RIGHT UP/DOWN POST
'5
]
Q3
Driver
Ouput Board
Sol. Expander
(Aux. Board)
Sol. Expander
(Aux. Board)
Sol. Expander
(Aux. Board)
D.T. Control
Line Color
D.T. Control
Line Connect
Power
Line Color
Power Line
Connnection
Power
Voltage
WHT
CN2-P5
BRN
J7-P1
20v DC
RED
CN2-P4
BRN
J7-P1
20v DC
ORG
CN2-P3
BRN
J7-P1
20v DC
#89 Bulb
165-5000-89
041-5075-04
Coil GA-Turn
26-1200
090-5044-00T
23-1100
090-5030-00T
26-1200
090-5044-00T
)LQG,W,Q)URQW
'U3LQEDOO
&2,/ /2&$7,216
)/$6+ /$03 /2&$7,216
$8; $8; $8; Legend Note:
= Coils/Flashers mounted above P/F.
= Coils/Flashers mounted below the P/F.
= ...mounted in/on Cabinet.
7<3,&$/ 6:,7&+ /$03 &2,/ :,5,1*
$QRGH 1RQ
%DQGHG 6LGH
1N4004
&DWKRGH
%DQGHG 6LGH
YEL
RED
COMMON
'ULYH
7UDQVLVWRU
Diode
1N4001
Note: All Switch, Lamp & Coil assemblies require diodes. Some diodes are located under the playfield on Terminal Strips or Diode Boards and not on the
'U3LQEDOO
)LQG,W,Q)URQW
3RZHU 6XSSO\
9ROWDJH
assemblies. D iode O n T erminal S trip or D iode O n D iode B oard.
'5
^
'RPHVWLF3LQEDOO5HGHPSWLRQ'LVWULE:WRUV0DS
?????????,QWHUQDWLRQDO'LVWULE:WRUV0DS?????????
For Parts & Service, call your nearest Distributor. View the above maps & the directories on the next page to locate your closest Distributor in your state, province, or
country. Distributors and phone numbers are subject to change. Call Stern Pinball, Inc. (Parts Sales & Technical Support) with any questions or if your Distributor
cannot help you: 1-800-542-5377 (in USA or Canada) or 1-708-786-5466. Visit us at www.SternPinball.com for current Distributor Information & other pinball needs.
'5
_
)LQG,W,Q)URQW
'U3LQEDOO
'RPHVWLF3LQEDOO5HGHPSWLRQ'LVWULE:WRUV'LUHFWRU\
$/$%$0$
%LUPLQJKDP 9HQGLQJ
,2:$
*UHDWHU $PHULFD 'LVW
0,11(627$
/LHEHUPDQ 0XVLF
1257+ '$.27$
0+ $VVRFLDWHV ,QF
7(;$6
&RPPHUFLDO 0XVLF
)UDQFR 'LVWULEXWLQJ
0RVV 'LVWULEXWLQJ
0,66285,
*UHDWHU $PHULFD 'LVW
2+,2
$WODV 'LVWULEXWLQJ
+$ )UDQ] &R
$5,=21$
0RXQWDLQ &RLQ
,1',$1$
$WODV 'LVWULEXWLQJ
6KDIIHU 'LVWULEXWLQJ
&OHYHODQG &RLQ
Birmingham (1)
1-205-324-7526
Montgomery (2)
1-334-834-3455
Phoenix
1-602-269-7596
&$/,)251,$
%HWVRQ :HVW
Buena Park (1)
1-714-228-7500
So. San Francisco (2)
1-650-952-4220
&$ 5RELQVRQ
Los Angeles (3)
1-323-735-3001
San Francisco (4)
1-650-871-4280
&2/25$'2
0RXQWDLQ &RLQ
Denver
1-303-427-2133
&211(&7,&87
%HWVRQ (QWHUSULVHV
Milford (1)
1-203-878-6966
7'0 'LVWULEXWLQJ
Williamantic (2)
1-860-423-1403
)/25,'$
%LUPLQJKDP 9HQGLQJ
Orlando (1)
1-407-425-1505
%UDG\ 'LVWULEXWLQJ
Miami [Miramar] (2)
1-954-874-1100
Orlando (1)
1-407-872-1666
*(25*,$
*UHDWHU 6RXWKHUQ 'LVW
Smyrna
1-770-803-3040
Johnston
1-515-278-4455
Des Moines
1-515-266-6422
Indianapolis
1-317-786-6892
&OHYHODQG &RLQ
Indianapolis
1-317-895-4270
6KDIIHU 'LVWULEXWLQJ
Minneapolis
1-612-887-5299
Kansas City (1)
1-816-531-4300
St. Louis (2)
1-314-645-3393
1(%5$6.$
&HQWUDO 'LVW
Omaha
1-402-493-5600
Indianapolis
1-317-899-2530
*UHDWHU $PHULFD 'LVW
Wichita
1-316-263-6181
1(9$'$
0RXQWDLQ &RLQ
.$16$6
8QLWHG 'LVW ,QF
Omaha
1-402-553-2812
Las Vegas (1)
1-702-798-0900
.(178&.<
$WODV 'LVWULEXWLQJ
5HQR *DPH 6DOHV
/28,6,$1$
$0$ 'LVWULEXWRUV ,QF
1(: -(56(<
%HWVRQ (QWHUSULVHV
Louisville
1-502-966-5266
Metairie (1)
1-504-835-3232
1HZ 2UOHDQV 1RYHOW\
New Orleans (2)
1-504-888-3500
0$5</$1'
%HWVRQ (QWHUSULVHV
Baltimore
1-410-646-4100
:HLQHU 'LVWULEXWLQJ
Baltimore
1-410-525-2600
0$66$&+86(776
%HWVRQ (QW 1(&2
Norwood (1)
1-781-769-9760
*HND\ 6DOHV
E. Longmeadow (2)
1-413-525-2700
,//,12,6
$PHULFDQ 9HQGLQJ
0,&+,*$1
$WODV 'LVWULEXWLQJ
$WODV 'LVWULEXWLQJ
&OHYHODQG &RLQ
Elk Grove Village (1)
1-847-439-9400
Wyoming (1)
1-616-241-1472
Elk Grove Village (1)
1-847-952-7500
Livonia (2)
1-734-432-1040
:RUOG :LGH 'LVWULEXWLQJ
Reno (2)
1-775-829-2080
Carlstadt (1)
1-201-438-1300
Carteret (2)
1-732-750-2700
-DFN *XDUQLHUL
6HUYLFH &R ,QF
3LQEDOOVDOHVFRP
Lakewood
1-732-364-9900
1(: 0(;,&2
0RXQWDLQ &RLQ
Albuquerque
1-505-345-7706
1(: <25.
%HWVRQ (QWHUSULVHV
New Hyde Park (1)
1-516-354-4647
Syracuse (2)
1-315-455-5400
'HLWK 'LVWULEXWLQJ
Roslyn Heights (3)
1-516-621-1234
1257+ &$52/,1$
%UDG\ 'LVWULEXWLQJ
Charlotte (1)
1-704-357-6284
2SHUDWRUV 'LVWULEXWLQJ
Fargo
1-701-282-7877
Cincinnati (1)
1-513-851-4100
Cleveland (2)
1-216-692-0960
6KDIIHU 'LVWULEXWLQJ
Columbus (3)
1-614-421-6800
Macedonia (4)
1-330-467-4850
Dallas (1)
1-214-741-6381
Houston (2)
1-713-523-7366
San Antonio (3)
1-210-226-6322
0DVWHU 6DOHV
Corsicana (4)
1-903-874-4740
6RXWKJDWH $PXVHPHQW
Houston (2)
1-713-691-7335
San Antonio (3)
1-210-225-3844
2./$+20$
*DOD[\ 'LVWULEXWLQJ
6RXWKJDWH0RVV 'LVW
25(*21
0RXQWDLQ &RLQ
87$+
0RXQWDLQ &RLQ
Tulsa
1-918-835-1166
Irving (5)
1-972-721-4600
Portland
1-503-234-5491
Salt Lake City
1-801-262-5494
6SHFLDOW\ &RLQ 3URGXFWV
6WUXYH 'LVWULEXWLQJ
3(116</9$1,$
%HWVRQ (QWHUSULVHV
:$6+,1*721
0RXQWDLQ &RLQ
Portland
1-800-987-4946
King Of Prussia (1)
1-610-265-1155
Pittsburgh (2)
1-412-331-8703
&OHYHODQG &RLQ
Pittsburgh (2)
1-412-323-8400
*UHHQ &RLQ
Pittsburgh (2)
1-412-881-8804
5RWK 1RYHOW\ 6XSHULRU
217$5,2
6WDUEXUVW &RLQ 0DFK
Toronto
1-416-251-2122
3DUWV 6HUYLFH 2QO\
%5,7,6+ &2/80%,$
&DQ &RLQ 0DFKLQH
Burnaby (1)
1-604-420-4008
3DFLILF 9HQGLQJ
Vancouver (2)
1-604-324-2164
48(%(&
/DQLHO $XWRPDWLF 0DFK
Montreal
1-514-731-8571
Salt Lake City
1-801-328-1636
Seattle
1-206-682-5700
:,6&216,1
3LRQHHU 6DOHV 6YF
Green Bay (1)
1-920-336-5800
Menomonee Falls (2)
1-262-781-1420
/LHEHUPDQ9LNLQJ 9HQG
Menomonee Falls (2)
1-262-255-6580
Wilkes-Barre (3)
1-570-824-9994
6287+ &$52/,1$
*UHHQ &RLQ
Note: For states and
Canadian Provinces
which do not have
Distributors, call the
neighboring state or
province with the city
closest to you (indicated
with a white dot). States
or Provinces with more
than 1 city containing a
distributor are numbered.
View the map on the
previous page.
Mrytle Beach
1-843-626-1900
7(11(66((
%UDG\ 'LVWULEXWLQJ
Memphis
1-901-345-7811
*UHHQ *$0(6
Memphis
1-901-353-1000
Archdale (2)
1-336-884-5714
Chicago (2)
773-384-2300
&$1$'$
Note: Distributors are subject to change. Visit us at www.SternPinball.com for current Distributor Information.
????????,QWHUQDWLRQDO'LVWULE:WRUV'LUHFWRU\????????
$5*(17,1$
8QLYHUVH (OHFWURQLFV
Buenos Aires
[54] 1865-4730
(OHFWURSRUW )ORUHQFLD
Mar Del Plata
[54] 22-3495-5532
$8675$/,$
$PXVHPHQW 0DFK 'LVW
Matraville
[61] 2931-66000
$8675,$
5 5XSS
Kaindorf
[43] 3452-86105
%(/*,80
%UDER
%5$=,/
'LYHU%UDV
São Paulo
[55] 1166-741000
&+,/(
&XLQVD
Santiago
[56] 2641-8520
'(10$5.
9HQGFRPDWLF
(Oslo, Norway)
[47] 2291-8383
),1/$1'
3HOLND 5D\2\
Espoo
[35] (0) 5892-90452-99
Antwerpen
[32] 3238-9970
)LQG,W,Q)URQW
'U3LQEDOO
)5$1&(
$YUDQFKHV $XWRPDWLF
Ducey
[33] 2338-96162
6)$
Paris
[33] 1532-68082
*(50$1<
%HUJPDQQ $XWRPDWHQ
Hamburg
[49] 4101/30 24-0
*5((&(
(OFRLQ
Nikea
[30] 1492-9357
*UHHFH &RLQ
Athens
[30] 1577-7012
,7$/< 560
7HFQRSOD\ 6$
6,1*$325(
9DOLEHO 7HFKQRORJLHV
San Marino
[39] 5499-00361
Singapore
[65] 748-8404
Auckland
[64] 9846-7606
Madrid
[34] 9167-16980
1(: =($/$1'
$PFR 0DFKLQH 6XSSOLHV
125:$<
9HQGFRPDWLF
Oslo
[47] 2291-8383
32578*$/
-DFLQWR 0DUWLQV /GD
Amadora
[35] 1214-963744
63$,1
&RPPHUFLDO &RFRPDWLF
81,7(' .,1*'20
(OHFWURFRLQ
London, England
[44] 2089-652055
(OHFWURFRLQ $IWHUVDOHV
Cardiff, S. Wales
[44] (0) 2920 343888
6:('(1
&DOO IRU ,QIRUPDWLRQ
or visit our website
www.SternPinball.com
6:,7=(5/$1'
1RYRPDW $*
Harkingen
[41] 6238-88961
'5
`
32:(55(48,5(0(176
This game must be connected to a properly grounded outlet to reduce shock hazard & insure proper game operation. See Sec. 5, Schematics & Troubleshooting, Chp. 3, Cabinet Wiring (Transformer
Power Wiring), for transformer connections required for Normal, High, and Low Line conditions.
110v AC - 125v AC @ 60Hz
Normal Line:
Domestic
AVG OPERATION
MAX OPERATION
uses an 8AMP 250v Slo-Blo Fuse.
CURRENT: 8AMP
CURRENT: 2.8AMP
WATTAGE: 329w
WATTAGE: 940w
218v AC - 240v AC @ 50Hz
High Line:
Export
AVG OPERATION
MAX OPERATION
England
uses 5AMP 250v Slo-Blo Fuses.
CURRENT: 5AMP
CURRENT: 1.8AMP
& Hong
| 8AMP*
Kong use
(*England & Hong Kong use an 8
250v S/B Fuse.)
|
WATTAGE: 412w
WATTAGE: 1145w 1832w* an
95v AC - 108v AC @ 50Hz / 60Hz
Low Line:
Export Japan Only
AVG OPERATION
MAX OPERATION
uses an 8AMP 250v Slo-Blo Fuse.
CURRENT: 2.6AMP
CURRENT: 8AMP
WATTAGE: 812w
WATTAGE: 264w
AMP
8A Fuse.
???????????75$163257$7,21????????????
Back Width
273e4"
755e8"
277e8"
The overall Front (37") & Back (755e8") dimensions reflect the
ADDED +11e4" height with the Leg Levelers turned all the way in.
The Cabinet is designed to give the recommended
6.5° pitch to the Playfield when all four (4) Legs are installed
with the Leg Levelers turned all the way in.
With the Leg Levelers turned all the way out, an
additional 13e4" MORE to the overall height should be
added to the dimensions.
22"
233e4"
511e2"
49"
161e4"
37"
Bottom
Depth
Leg Length:
301e4"
Front Height
Back Height
To reduce the possibility of damage, observe
ALL precautions whenever transporting the
game. Read & follow Section 1, Chapter 1,
Pinball Game Set-Up Procedures, & How
to Secure the Backbox for Transporting.
Remove the legs & secure the game within
the transporting vehicle.
S ave a nd r e ta in a ll p r in te d in for m at io n on t he g am e.
Height: 56"
Width: 31"
Depth: 31"
Approximate Unboxed Weight:
Wt. 260lbs. (+/- 10)
11e4"
54 "
1e
2
*$0(',0(16,216
'5
=
)LQG,W,Q)URQW
'U3LQEDOO
3LQEDOO*DPH6HUYLFH0DQXDO*HQHUDO7DEOHRI&RQWHQWV
See Sections 3 & 5, Table Of Contents, for details of that Section and it’s Chapters.
3LQEDOOVX$GGLWLRQDO3KRWR,QVHUWV.LWX1HZWR3RUWDOV,QVLGH)URQW
X%DFNER[/D\RXW/RFDWLRQV)XVHV%ULGJHV5HOD\V520V '5X
X)LQG,W,Q)URQW'U3LQEDOO6HFWLRQ([SODLQHGX+RZ,W:RUNV '5Y
X'LDJQRVWLF$LGVX&38',36ZLWFK6HWWLQJX5206XPPDU\7DEOH '5Z
X6ZLWFK0DWUL[*ULG'HGLFDWHG6ZLWFKHVX/DPS0DWUL[*ULG '5[
X6ZLWFK/DPS0DWUL[*ULG/RFDWLRQV '5\
X&RLOV'HWDLOHG&KDUW7DEOH '5]
X&RLO)ODVK/DPS/RFDWLRQV '5^
X'RPHVWLF3LQEDOO5HGHPSWLRQDQG,QWHUQDWLRQDO'LVWULEXWRUV0DSV '5_
X'RPHVWLF3LQEDOO5HGHPSWLRQDQG,QWHUQDWLRQDO'LVWULEXWRUV'LUHFWRULHV '5`
X3RZHU5HTXLUHPHQWVX7UDQVSRUWDWLRQX*DPH'LPHQVLRQV '5a
*DPH0DQXDO*HQHUDO7DEOHRI&RQWHQWV LLL
6(&7,21 &KDSWHU$IWHU6HW8S Z 3LQEDOO *DPH 6HW8S 3URFHGXUHV
Z 3LQEDOO *DPH 6HW8S )XWXUH 5HIHUHQFH
/HJ /HYHOHU $GMXVWPHQW
(DV\ $FFHVV 3RVLWLRQV Z +RZ WR 6HFXUH WKH %DFNER[
Z
Z
6(&7,21 &KDSWHU*DPH2SHUDWLRQ)HDWXUHV Z 6WDUW RI *DPH )HDWXUHV 6WDUWLQJ D 1RUPDO *DPH 6WDUWLQJ 7HDP 3OD\ 6WDUWLQJ /HDJXH 3OD\
Z 'XULQJ *DPH )HDWXUHV )HDWXUH 0RGH &RPELQDWLRQ 6KRWV 0XOWLEDOO 5HSOD\ )HDWXUH
Z (QG RI *DPH )HDWXUHV *DPH (QGLQJV 0DWFK )HDWXUHV (QWHULQJ ,QLWLDOV1DPH ,QVWUXFWLRQ &DUG Z $XWR 3HUFHQWDJLQJ
Z
6(&7,21 Z 3RUWDOV• 6HUYLFH 0HQX 6\VWHP 7DEOH RI &RQWHQWV GHWDLOHG RXWOLQH RI WKLV VHFWLRQ Z 3RUWDOV• 6HUYLFH 6ZLWFK 6HW $FFHVV 8VH )XQFWLRQ )XQFWLRQ )XQFWLRQ &KDSWHU3RUWDOV• 6HUYLFH0HQX,QWURGXFWLRQ Z +RZ WR 8VH 7KLV 6HFWLRQ
Z 3RUWDOV• 6HUYLFH 0HQX ,FRQ 7UHH ([LWLQJ WKH 3RUWDOV• 6HUYLFH 0HQX Z 3RUWDOV• 6HUYLFH 0HQX ([DPSOH
&KDSWHU*R7R'LDJQRVWLFV0HQX &KDSWHU*R7R$XGLWV0HQX &KDSWHU*R7R$GMXVWPHQWV0HQX &KDSWHU*R7R,QVWDOOV0HQX &KDSWHU*R7R5HVHW0HQX &KDSWHU*R7R7RXUQDPHQW0HQX)XWXUH([SDQVLRQ X
6(&7,21 &KDSWHU3DUWV,GHQWLILFDWLRQ/RFDWLRQ7KH3LQN3DJHV 2YHUYLHZ 3OD\ER\ %DFNER[ $VVHPEO\ 6SHDNHU 3DQHO $VV\ IRU WKH %DFNER[ $VVRFLDWHG 3DUWV &DELQHW *HQHUDO 3DUWV 6ZLWFKHV
3OD\ILHOG *HQHUDO 3DUWV 6ZLWFKHV %HORZ 3OD\ILHOG *HQHUDO 3DUWV 6ZLWFKHV $ERYH 3OD\ILHOG 5XEEHU 3DUWV 5LQJV $FWXDO 6L]H 3OD\ILHOG 3ODVWLFV 6FUHHQHG &OHDU 3KRWR ,QVHUWV 'HFDOV Section 4, Chapter 1, Parts Identification & Location (The Pink Pages) Continued on the Next Page
0DUFK
L
Section 4, Chapter 1, Parts Identification & Location (The Pink Pages) Continued from the Previous Page
3OD\ILHOG 5DLOV :LUH )RUPV %DOO *XLGHV DQG 0LVF 5DPS 3OD\ILHOG 0HWDO 3RVWV 6FUHZV DQG 1XWV $FWXDO 6L]H 3OD\ILHOG 0HWDO 6SDFHUV $FWXDO 6L]H 3OD\ILHOG 3ODVWLF 3RVWV DQG 6SDFHUV $FWXDO 6L]H 3OD\ILHOG 6PDOO %D\RQHW 7\SH %XOEV DQG 6RFNHWV $FWXDO 6L]H 3OD\ILHOG /DUJH %D\RQHW 7\SH %XOE DQG 6RFNHWV $FWXDO 6L]H 3OD\ILHOG :HGJH %DVH %XOEV DQG 6RFNHWV $FWXDO 6L]H
&KDSWHU'UDZLQJVIRU0DMRU$VVHPEOLHV5DPSV7KH%OXH3DJHV Z 2YHUYLHZ %DOO 6KRRWHU 3OXQJHU $VVHPEO\ 7RS $XWRSOXQJHU &RLO $VVHPEO\ ZLWK $UP :HOG $VVHPEO\ %RW %DOO 7URXJK $VVHPEO\ DQG $VVRFLDWHG 3DUWV
)OLSSHU /HIW $VVHPEO\ DQG $VVRFLDWHG 3DUWV )OLSSHU 5LJKW $VVHPEO\ DQG $VVRFLDWHG 3DUWV
6OLQJVKRW $VVHPEOLHV 4W\ 7RS ƒ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ot Sold as an assembly, order the individual part(s) actually required.
Z 8. 21/< 237,21$/ %DOO 'HIOHFWRU $VVVHPEOLHV 4W\ 7RS Z 8. 21/< 237,21$/ 8S'RZQ 3RVW $VVHPEO\ %RW 6(&7,21 Z 6FKHPDWLFV 7URXEOHVKRRWLQJ 7DEOH RI &RQWHQWV GHWDLOHG RXWOLQH RI WKLV VHFWLRQ Z &RLOV 'HWDLOHG &KDUW 7DEOH &KDSWHU%DFNER[:LULQJ7KH<HOORZ3DJHV &KDSWHU3OD\ILHOG:LULQJ7KH<HOORZ3DJHV &KDSWHU&DELQHW:LULQJ7KH<HOORZ3DJHV &KDSWHU3ULQWHG&LUFXLW%RDUGV3&%V7KH<HOORZ3DJHV $33(1',;(6$- $-
Z $SSHQGL[HV $- 7DEOH RI &RQWHQWV RXWOLQH RI WKLV VHFWLRQ DIWHU Z $SSHQGL[HV $- $-
3ODVWLF 3DUW &RORU &KDUW %RWWRP + 7RS ,
*ORVVDU\ RI 7HUPV /DVW 3DJH
/LPLWHG :DUUDQW\ &DXWLRQV :DUQLQJV 1RWLFHV /DVW 3DJH
X6ZLWFK0DWUL[*ULG'HGLFDWHG6ZLWFKHVX/DPS0DWUL[*ULG ,QVLGH%DFN
LL
0DUFK
6HFWLRQ & KD SW H U R I 6HF$IWHU6HW8S
$IWH U6 H W 8S
3LQEDOO*DPH6HW 8S3URF HGXU HV
...after reading the Pinball Game Set-Up
Instruction Sheet (SPI Part Nº 755-5310-00)
included with your New Pinball Game,
continue with the below procedures:
:LWKWKH%DFN*ODVV5HPRYHG
1. Check all connectors in the Backbox for
loose wire terminations. Reseat any loose wire
by pushing in on the terminal. Push on all
connectors plugged into the CPU/Sound Board,
I/O Power Driver Board, and the Display Power
Bd. to check that they are properly seated.
Ensure Fluorescent Light Tube is seated
correctly. Check that all fuses are seated
properly. Close and lock the Backbox and
secure its’ keys back inside the Coin Door.
:LWKWKH 3OD\ILHOG*ODVV5HPRYHG
2. Make sure the proper amount of pinballs
were installed (Amount of balls are always
specified on decal attached to the lock down
assembly and at the top of the inside cover).
3. Remove all shipping tie downs, shipping
blocks, packing foam, shipping instruction
pages, etc. (if any) from the game. READ ALL
PRINTED INFORMATION! Shipping
instructions, labels and/or decals describe
warnings, cautions, and/or important information
specific to the game. SAVE ALL PRINTED
INFORMATION.
4. Raise the playfield and support it, by lifting
the Prop Rod (located on the left, inside the
cabinet). The end of the Prop Rod should be
placed into the hole under playfield. See the
illustration "Easy Access Service System - 3
Positions" on Page 4.
5. Visually inspect all cabinet cables and
connector terminations; ensure no wires or
cables are pinched and that cable harnesses are not pulled tight.
6. Lower the playfield and ensure game is level side-to-side by adjusting Leg Levelers, if required. See the
illustration "Leg Leveler Adjustment" on Page 4. Start with the Leg Levelers turned all the way in (1.25"
from floor to bottom of leg), depending on the condition of the floor, adjust the Leg Levelers as required until
the game pitch is 6.5°, determined by the Bubble Level.
USE THE BUBBLE LEVEL ON THE WOOD RAIL (LOWER RIGHT) TO DETERMINE IF LEVEL IS ACHEIVED.
BUBBLE SHOULD APPEAR BETWEEN THE 2 BLACK LINES. SEE PAGE 4 FOR AN ILLUSTRATION.
7KHSOD\ILHOGLQFOLQHDIIHFWVGLII LFXOW\ RISOD\8VHWK HUHFRPPHQGHG
LQFOLQH*DPHGLIILFXOW\LVEHVWYDULHGXVLQJJDPHDGMXV WPHQWV
:LWKWKH&RLQ'RRU2SH Q
7. If desired, perform any self tests at this time (see Section 3, Chapter 1, Portals Service Menu Introduction,
and Chapter 2, GO TO DIAGNOSTICS MENU, for instructions on how to enter "Begin Play Test" and "Game
Name Test" Menus to test components on the game).
8. If desired, adjust Game Pricing, Standard and/or Custom (see Section 3, Chapter 4, GO TO ADJUSTMENTS
MENU and Section 3, Chapter 5, GO TO INSTALLS MENU to adjust Game Difficulty, 3- or 5-Ball Play, Home
or Tournament Settings, Novelty, Add-A-Ball, etc.).
Per CE: "The appliance
has to be placed in a
horizontal position."
"This appliance is not to be
cleaned by a Water Jet."
$IWHU6HW8S
6HFWLRQ&KDSWHU
3DJH
3L QEDO O*DPH6HW 8S)XW XU H5HIHUHQFH
Open up the Printable Version in
both 8-1/2 X 11 & 11 X 17.
6HF$IWHU6HW8S
6HFWLRQ&KDSWHU
3DJH
$IWHU6HW8S
6HF$IWHU6HW8S
3L QE DO O*DPH6HW 8S)XW XU H5HIHUHQFH&RQW LQXHG
$IWHU6HW8S
6HFWLRQ&KDSWHU
3DJH
+RZWR6HFXUHWKH%DFNER[IRU7UDQVSRUWLQJ
6HF$IWHU6HW8S
For more Backbox details & part numbers, see Section 4,
Chapter 1, Backbox Assembly, Pages 56-57.
/HJ/HY HOHU $GM XVW P HQW
Attach the four (4) Leg Assemblies to cabinet corners with the eight (8) leg bolts provided .
Cabinet Leg
Start adjustment with the leg levelers turned all the way
in.
View the bubble in the level provided on the right side
wood rail.
Bubble Level
located on
the wood rail
next to the
Shooter Lane.
Bubble
Bubble
should be
between
the 2 black
lines.
3e -16
8
Hex
Nut
Adjust the front or rear levelers as necessary to cause
the bubble to float between the two (2) black lines.
Use a pinball to roll down the center of the playfield for
side-to-side leveling.
YOUR PLAYFIELD PITCH IS NOW AT 6.5° AS
REQUIRED FOR PROPER GAME PLAY!
Leg Leveler
turned all
the way in.
Note: For custom adjustment greater than >6.5° can be achieved by turning out the rear leg leveler(s), however, it is not recommended.
(D V\$FF HVV6HU Y LF H6\VW HP 3RVL WL RQV
With the front molding & glass removed, carefully lift the playfield (take care when using the Bottom Arch to hoist).
Positions 1 & 2
Fig. 1B
When lifted high enough, the Playfield Support
Slide Brackets (Fig. 1A) can be seen & can clear
Fig. 1A
the cabinet front. At this time, pull the playfield
Fig. 1C
toward the front of the cabinet, checking that the
mechanical components clear the cabinet front, then
rest the playfield on the Playfield Support Slide
Brackets at the front channel of cabinet (Fig. 1C);
Or, the Prop Rod (located on the right inside of
cabinet) can be used by positioning the Prop Rod end into the receiving playfield hole (Fig. 1B).
Position 3
With the playfield at rest, hold the sides & pull toward
the front of the cabinet (approx. 6" to 8"), until
resistance is felt from Edge Slide Brackets stopping
against the Slide & Pivot Support Brackets located
on either side of the cabinet (Fig. 2A). At this time,
swivel the playfield toward the Backbox, then rest on
the top edge (Fig. 2B & 2C).
6HFWLRQ&KDSWHU
3DJH
Fig. 2C
Fig. 2A
Fig. 2B
$IWHU6HW8S
6HFWLRQ & KD SW H U R I *DP H 2SHUDWLR Q)HDWXUHV
6WDUWLQJD1RUPDO*DPH
Insert coin(s). The game generates a sound for the
first coin & for each subsequent coin with the display
indicating the number of credits posted. Press the
Start Button and a start-up sound is produced, and
the posted credits are reduced by one. Subsequent
players can be added (up to 4 can play!) by pressing
the Start Button before the end of ball 1 (with
sufficient credit in the game).
The display now indicates the player or # of players
selected from the total depressions of the Start
Button. The display indicates the ball in play, and a
ball is served to the Shooter Lane. An introduction is
shown followed by Skill Shot Graphics and/or instructions. Pressing the Start Button after ball 1 of any
player will start a new game (if credits are available),
but only if the Start Button is depressed for 2-3
seconds. This delay is to avoid accidental "re-starts"
of a game. (Note: Any partial credit remaining during
game play after the end of ball 1, or power down, will
be eliminated.)
'X UL QJ*DPH)HDW XU HV
)HDWXUH0RGH&RPELQDWLRQ6KRWV
Features are lit on the playfield and started by
completing certain shots (e.g. completion of Target
Banks, Orbit(s), Ramp(s) and/or any combination of
the shots).
0XOWLEDOO
Multiball is started after completion of certain features.
Multiball may vary with the amount of balls used
depending on game style.
5HSOD\)HDWXUH
Replay awards are given as the player exceeds a High
Score Level during game play. This can be adjusted
with Adj. 3, Replay Awards (Default = CREDIT).
Players exceeding the High Score Levels can receive:
CREDIT, EXTRA BALL, or SPECIAL. Adjust to
NONE if a replay award is not desired.
(QGRI*DPH)HDWX UHV
6WDUWLQJ7HDP3OD\ 'RXEOH V *DPH (QGLQJV
Team Play is a four player game. The totals for players
1 & 3 (Team 1) and players 2 & 4 (Team 2) are
displayed individually as well as the combined score
for both teams. Team Play only works in a 4-Player
game. In all other cases, the individual scores are
shown.
When all player(s) have played all balls (including any
Extra Balls), the game ends. If power is interrupted
during the course of a game, it will end that game (see
Starting a Normal Game). Closure of the Plumb Bob
Tilt Switch according to the number of tilts set, Adj. 09,
Tilt Warnings (Default = 01) or prolonged closure, will
end the current Ball-In-Play. Closure of the Slam Tilt
Switch on the Coin Door ends the current game(s).
6WDUWLQJ/HDJXH3OD\
After credit is posted, while holding in the Left Flipper
Button, press the Start Button. League Play has
now begun. The differences between Normal Game
Play and League/Tournament Play are: There is no
"auto-percentaging" (awarding extra balls, specials,
etc. to players with very low scores on the second or
third ball). Mystery Features are awarded in a set
order rather than random in Normal Game Play.
Percentage Game Features are not automatically
advanced as they are for the Regular Play Features.
0DWF K)HDWXUH
At the end of each ball, earned bonuses are collected.
At the end of the last ball of a game (including any
extra balls, if applicable), earned bonuses are collected, then the system produces a random 2-digit
number (a multiple of 10; 00 to 90). Matching the last
2 digits of the player’s score with this number awards a
credit. In Adj. 07, Match Percentage (Default = 8%)
can be changed from 0-10%. Changing the
percentage to 0% displays the "Match Animation" at
the end of the game, however, will never match nor
award anything. Changing this adjustment to OFF will
not display the "Match Animation" nor award anything.
(QWHULQJ,QLWLDOV1DPH
If player achieved a new high score in a game or
acheived a special feature (if given) the player may
enter 3 Initials. In Adj. 24, High Score Initials
(Default = 3 Initials) can also be changed to 10-Letter
Name. Use the Flipper Buttons to choose a letter or
character as seen on the Dot Display. Hitting the Start
Button locks in the letter or character and proceeds to
the next letter. The game then proceeds into the
Game-Over Mode and then to the Attract Mode.
Note: Adj. 26, Custom Message (Default = ON) can
be displayed during the Attract Mode; enter letters in
the same fashion.
For more details with Adjustments, see Sec. 3, Chp. 4.
Continued Next Page.
*DPH2SHUDWLRQ
)HDWXUHV
6HFWLRQ&KDSWHU
3DJH
6HF*DPH2S
6W DU WRI*D P H)HDW XU HV
$XWR3HUFHQWDJLQJ
This game is equipped with Auto Percentaging, Adj. 01, Replays: Fixed/Auto (Default = 12%, adjustable). The
Replay Percent is automatically adjusted or you can set a Fixed Replay Score. Four levels may be selected.
Adjustments allow awarding of a "CREDIT" (or your setting) as each level is exceeded. This can be adjusted with,
Adj. 03, Replay Award (Default = CREDIT). With the Autopercentage Feature, if the actual replay percentage is
higher or lower than that desired, the game will automatically adjust for the new recommended percentage
score(s). You may choose to make a different "score-to-beat" adjustment; this is done by utilizing Adj. 02, Replay
Levels. For more details with Adjustments, see Section 3, Chapter 4, GO TO ADJUSTMENTS MENU; also, see
see Section 3, Chapter 5, GO TO INSTALLS MENU for further customization of your Pinball Game.
6HF*DPH2S
, QVW UX FW LRQ&D UG
Below is a COPY of the Game Instruction Card (SPI Nº: 755-5176-10 USA) which is included with every game.
If your card is lost or damaged, simply COPY this page and cut out the Instruction Card as a temporary replacement until a new card is ordered.
(Hint: COPY & CUT along the dotted line and fold in the center to keep the "COPY" sturdy.)
COPY &
CUT
FOLD
HERE
)RUPRUHGHWDLOHGJDPHUXOHVYLVLWRXUZHEVLWH#
ZZZ6WHUQ3LQEDOOFRPDQGFOLFNRQWKH
3/$<%2<RU*DPH$UFKLYH
3RS%XPSHU/LQN
6HFWLRQ&KDSWHU
3DJH
*DPH2SHUDWLRQ
)HDWXUHV
6HFWLRQ
3RUWDOV• 6HUYLFH0HQX6\VWHP
7DEOHRI&RQWHQWV
6HUYLFH 6ZLWFK 6HW 5HG *UHHQ %ODFN %XWWRQV $FFHVV 8VH )XQFWLRQ 9ROXPH 0HQX )XQFWLRQ 6HUYLFH &UHGLWV 0HQX )XQFWLRQ 3RUWDOV • 6HUYLFH 0HQX ]
&KDSWHUx3RUWDOV• 6HUYLFH0HQX,QWURGXFWLRQ +RZ WR 8VH 7KLV 6HFWLRQ 3RUWDOV• 6HUYLFH 0HQX ,FRQ 7UHH IRU 3/$<%2< 3LQEDOO 3RUWDOV• 6HUYLFH 0HQX ([DPSOH
48,7 7+,6 6(66,21 ([LWLQJ WKH 3RUWDOV• 6HUYLFH 0HQX 3UREOHP 6ROXWLRQ 7DEOH &KDSWHUx*R7R'LDJQRVWLFV0HQX2YHUYLHZ x *2 72 ',$*1267,&6 0(18 xx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xx 7HVW )ODVK /DPSV xx &OHDU %DOO 7URXJK xx 7HFKQLFLDQ $OHUWV 6ZLWFK 'HWHFWLRQ DQG 3LQEDOO 'HWHFWLRQ xx 6HUYLFH 3KRQH xx %HJLQ 3OD\ 7HVW xx )LUH .QRFNHU xx 6RXQG 6SHDNHU 7HVW 6SHDNHU 3KDVH 7HVWLQJ xx %HJLQ %XUQ ,Q xx 'RW 0DWUL[ 7HVW 'RW 0DWUL[ 'LVSOD\ ([SODLQHG xx 3OD\ER\ 7HVWV &HQWHUIROG 7ULDQJOH 6WHSSHU 0RWRU 7HVWV xx *R 7R )XVH 7DEOH ([DPSOH %$&.%2; /$<287 /2&$7,216 )XVHV %ULGJHV 5HOD\V 520V xx 'U 3LQEDOO &RLO )ORZ &KDUW 6ZLWFK )ORZ &KDUW DQG /DPS )ORZ &KDUW &KDSWHUx*R7R$XGLWV0HQX2YHUYLHZ ]
*DPH $XGLW 7DEOH x *2 72 $8',76 0(18 xx (DUQLQJV $XGLWV $XGLWV xx 6WDQGDUG $XGLWV $XGLWV xx )HDWXUH $XGLWV $XGLWV xx *R 7R 3ULQWHU 0HQX 4XLFN 3ULQWRXW )XOO 3ULQWRXW DQG 5HVHW 3ULQWHU
&KDSWHUx*R7R$GMXVWPHQWV0HQX2YHUYLHZ ]
*DPH $GMXVWPHQW 7DEOH x *2 72 $'-8670(176 0(18 xx 6WDQGDUG $GMXVWPHQWV $GMXVWPHQWV xx )HDWXUH $GMXVWPHQWV $GMXVWPHQWV xx &XVWRP 0HVVDJH 'LUHFW $FFHVV WR $GMXVWPHQW &KDSWHUx*R7R,QVWDOOV0HQX2YHUYLHZ x *2 72 ,167$//6 0(18 xx ,QVWDOO ([WUD (DV\ xx ,QVWDOO (DV\ xx ,QVWDOO 1RUPDO xx ,QVWDOO +DUG xx ,QVWDOO ([WUD +DUG xx ,QVWDOO %DOO xx ,QVWDOO %DOO xx 7RXUQDPHQW xx )UHH 3OD\ 7RXUQDPHQW xx ,QVWDOO +RPH 3OD\ xx )LOP 6WDU 5HVHW xx ,QVWDOO 1RYHOW\ xx ,QVWDOO $GG$%DOO xx ,QVWDOO )DFWRU\ &KDSWHUx*R7R5HVHW0HQX2YHUYLHZ x *2 72 5(6(7 0(18 xx 5HVHW &RLQ $XGLWV xx 5HVHW *DPH $XGLWV xx 5HVHW +LJK 6FRUHV xx 5HVHW &UHGLWV xx )DFWRU\ 5HVHW ]
([DPSOH &KDSWHUx*R7R7RXUQPDPHQW0HQX)XWXUH([SDQVLRQ x *2 72 72851$0(17 0(18 237,21$/ 86( 21/< ]
3RUWDOV• 6HUYLFH
0HQX6\VWHP
)8785( (;3$16,21 $7 7,0( 2) 35,17,1* 7+,6 0(18 ,6 12123(5$7,21$/ 6HFWLRQ
3DJH
6HF0HQX,QWUR
]
]
xx
]
]
]
]
xx
]
]
6HUYLFH6ZLWFK6HW5HG*UHHQ%ODFN%XWWRQV$FFHVV8VH
The Service Switch Set provides access for three (3)
functions available for your use. They are Volume
Menu, Service Credits Menu and Portals• Service
Menu. All are accessed separately depending on which
colored button (Red, Green or Black) is pushed first.
5HG
D
*UHHQ
%ODFN
,QVLGH &RLQ 'RRU
7KH 3OD\ILHOG 3RZHU
,QWHUORFN 6ZLWFK
PXVW EH SXOOHG RXW
LI &RLO )ODVKODPS
7HVWLQJ
7KH 0HPRU\ 3URWHFW
6ZLWFK LV GLVDEOHG
ZKHQ WKH &RLQ 'RRU
LV RSHQ UHTXLUHG IRU
DQ\ FKDQJHV
To access any of these three (3) functions you must first open the
Coin Door (see pictorial above) with the Game in the Attract Mode
(not already in any Function or Menu stated below).
3XVKLQJ
)XQFWLRQ9ROXPH0HQX
5HG VW
6HF0HQX,QWUR
Pushing the Red Button first, enters the Volume Menu. While in
this Mode, to DECREASE the volume, hold down or depress the
Red "LEFT" Button until desired the volume is achieved; to
INCREASE the volume, hold down or depress the Green "RIGHT"
Button until the desired volume is achieved.
Note: Pushing the Left or Right Flipper Buttons operates the same as the Red
or Green Buttons of the Service Switch Set, while in this Volume Mode.
Set between 0 and 31; 15 is the Factory Default. Once your
adjustments are made, this menu will automatically exit a few
seconds after the last button depression.
)XQFWLRQ6HUYLFH&UHGLWV0HQX
3XVKLQJ
*UHHQ VW
Pushing the Green Button first, adds Service Credits (will not
affect your audits as "paid" credits). This is useful for the technician
to test the game in regular play without affecting the game audits.
Each depression adds 1 credit; up to 50 credits can be applied.
Adjustment 11, Credit Limit, (Default = 30) determines this,
however, it can be changed from 04-50; see Chapter 4 of this
Section for details). Once your credits are added, this menu will
automatically exit a few seconds after the last button depression.
Note: This function is disabled if Adjustment 25, Free Play, is set to YES. The
Service Credits are limited to the Credit Limit in addition to any paid credits present
in the game (e.g. If the Credit Limit is 30, and there are 8 paid credits present, only
22 Service Credits can be applied.).
3XVKLQJ
%ODFN VW
)XQFWLRQ3RUWDOV• 6HUYLFH0HQX
Pushing the Black Button first, enters the Portals• Service Menu.
Once in, move through the menus and sub-menus by pushing down
or depressing the Red "LEFT" or Green "RIGHT" Buttons.
Note: Pushing the Left or Right Flipper Buttons operates the same as the Red
or Green Buttons of the Service Switch Set, while in this Service Mode.
Select or activate the Icon chosen (the Icon will be "flashing") by
pushing down or depressing the Black "ENTER" Button.
Note: Pushing the Start Button operates the same as the Black Button
of the Service Switch Set, while in this Service Mode.
Please read the remainder of this Chapter for more information on the Portals• Service Menu. The remaining six
(6) Chapters of this Section explains all Icons & Menus in detail. Read! Read! Read!
6HFWLRQ&KDSWHU
3DJH
3RUWDOV• 6HUYLFH
0HQX,QWURGXFWLRQ
6HFWLRQ & KD SW H U R I 3 R U WD O V • 6HUY LFH0HQX,QWURGXFWLRQ
Important: The Dual Switch Bracket holds the Playfield Power Interlock & Memory Protect Switches. It is
located just inside the Coin Door frame (see pictorial of the Coin Door on the previous page). The Button Switch
at the top is the Playfield Power Interlock Switch. It must be pulled out for electro-mechanical device testing or
diagnostic purposes (this is required). If this button is pushed in, the Playfield Power is diasabled while the Coin
Door is OPEN. The Button Switch at the bottom is the Memory Protect Switch. It is enabled while the Coin
Door is CLOSED; meaning any adjustment changes that are made will not be written to memory. If changing
adjustments is required, ensure the Coin Door is OPEN to disable this switch, thus allowing for desired changes.
+RZWR8VH 7KLV6H FWLRQ
This section will cover all functions available in the Portals• Service Menu in a Step-By-Step process. This
section is divided into chapters which coincide with the MAIN MENU. The previous and following pages in this
Chapter will instruct the operator on how to move through the Menus. It’s simple, easy and fun to use!
Use the Red "LEFT" & Green "RIGHT" Buttons (or Left & Right Flipper Buttons) to move the selected Icon
left or right, and the Black "ENTER" Button (or Start Button) to activate the selected Icon. The use of the
Service Switch Set (Red, Green, & Black Buttons) is required in Switch Test or Active Switch Test, as the
Start & Flipper Buttons are a part of this test.
The MAIN MENU now appears with the "DIAG" Icon (GO TO DIAGNOSTICS MENU) flashing:
As the operator views the Menu Screen(s), the
symbols indicates that there are more Icons to select in
each direction. The Icon selected will blink. Pushing the Black "ENTER" Button (or Start Button) will select the
Icon and the Menu Screen will change to the menu selected. Select the "PREV" Icons to move backwards
through the menu levels. Select the "QUIT" Icon to completely exit the Service Mode.
View the Portals• Service Menu Icon Tree on the next pages for a complete overview of all menus used in this
system. The "HELP" Icon & "?" Mini-Icon provide explanation of ICON usage in the Menu where the "HELP" Icon
or "?" Mini-Icon was selected. View QUIT THIS SESSION (Exiting the Portals• Service Menu) at the end of this
chapter (reference Section 3, Chapter 1, Portals• Service Menu Introduction).
The chapters in this section, which coincide with the MAIN MENU, will also provide more detailed information.
Use both the manual and the display to help customize, troubleshoot and/or diagnose faults, if any.
3RUWDOV• 6HUYLFH
0HQX,QWURGXFWLRQ
6HFWLRQ&KDSWHU
3DJH
6HF0HQX,QWUR
To get into the Service Menu Mode review "Function 3, Portals• Service Menu" on the previous page. After
Power-Up, push down the Black "BEGIN TEST" Button to begin. Looking at the display you will momentarily see
"Service Menu" with a satellite flying from right to left pulling a banner "Portals©TM" followed by the MAIN MENU:
3RUWDOV• 6HUYLFH0HQX,FRQ7UHHIRU3LQEDOO*DPH
Read the following chapters in this section:
Note: In Sub-Menu Tests or Displays, further action is required: select & activate the appropriate Mini-Icon(s).
Chp. 2
D
*
DIAGNOSTICS MENU
GO TO
SWITCH MENU
*
GO TO
COIL MENU
FROM DIAGNOSTICS MENU:
ACTIVE
SWITCH TEST
SWITCH TEST
In Test
CLEAR
BALL TROUGH
See Display
SINGLE
COIL TEST
DEDICATED
SWITCH TEST
In Test
6HF0HQX,QWUR
*
In Test
SINGLE
LAMP TEST
TEST
ALL LAMPS
ROW
LAMP TEST
COLUMN
LAMP TEST
In Test
In Test
In Test
In Test
*
^MORE_ DIAGNOSTICS MENU CONTINUED
SOUND/
SPEAKER TEST
In Test
FIRE
KNOCKER
Audible Sound
DOT MATRIX
TEST
In Test
BEGIN
BURN IN
In Test
GO TO
PLAYBOY TESTS
PLAYBOY TESTS
DR. PINBALL
COIL
FLOW CHART
SWITCH
FLOW CHART
See Display
GO TO
FUSE TABLE
See Display
FROM DIAGNOSTICS MENU:
FROM DIAGNOSTICS MENU:
XX
DR. PINBALL
SERVICE
PHONE #
See Display
LAMP MENU
CYCLING
COIL TEST
In Test
TECHNICIAN
ALERTS
See Display
FROM DIAGNOSTICS MENU:
COIL MENU
In Test
BEGIN PLAY
TEST
In Test
*
FROM DIAG. MENU:
SWITCH MENU
Chp. 4
for more detailed information on these Menus.
TEST
FLASH LAMPS
In Test
GO TO
LAMP MENU
Chp. 3
LAMP
FLOW CHART
See Display
CENTERFOLD
MOTOR TEST
TRIANGLE
MOTOR TEST
STEPPER
MOTOR TEST
In Test
In Test
In Test
See Display
^MORE_ DIAGNOSTICS MENU CONTINUED
Note: In Sub-Menu Displays, further action is required: select & activate the appropriate Mini-Icon(s).
Note: In Sub-Menu Displays, further action is required: select & activate the appropriate Mini-Icon(s).
AUDITS MENU
ADJUSTMENTS MENU
STANDARD
AUDITS
See Display
EARNINGS
AUDITS
See Display
FROM AUDITS MENU:
PRINTER MENU
FEATURE
AUDITS
See Display
GO TO
PRINTER MENU
STANDARD
ADJUSTMENTS
See Display
FEATURE
ADJUSTMENTS
See Display
CUSTOM
MESSAGE
See Display
Note: Special equipment is required.
WHEN ENTERING THESE NOTED MENUS, YOU MUST PULL OUT
the Power Interlock Switch for operation with the Coin Door open.
QUICK
PRINTOUT
See Display
FULL
PRINTOUT
See Display
6HFWLRQ&KDSWHU
3DJH
RESET
PRINTER
*
See Display
3RUWDOV• 6HUYLFH
0HQX,QWURGXFWLRQ
3RUWDOV• 6HUYLFH0HQX,FRQ7UHHIRU3LQEDOO*DPH&RQWLQXHG
Note: After selection of any of the Install Icons, the request is installed and returns to the Install Menu.
The last icon activated before exiting this menu will supercede any previous Icon selected in the group.
Read the following chapters in this section:
Chp. 5
Chp. 6
Chp. 7
for more detailed information on these Menus.
I N S TA L L S M E N U
INSTALL
EXTRA EASY
INSTALL
EASY
INSTALL
NORMAL
INSTALL
HARD
INSTALL
EXTRA HARD
INSTALL
3-BALL
INSTALL
5-BALL
INSTALL
ADD-A-BALL
INSTALL
FACTORY
$ .50
COMPETITION
FREE PLAY
COMPETITION
INSTALL
HOME PLAY
FILM STAR
RESET
INSTALL
NOVELTY
Note: After selection of any of the 1st four Reset Icons, the request is installed and returns to the Reset Menu.
Selecting the "FACT" Icon, the request is installed and exits the Portals™Service Menu System.
TOURNAMENT MENU
RESET MENU
F U T U R E E X PA N S I O N
RESET
COIN AUDITS
RESET
GAME AUDITS
RESET
HIGH SCORES
RESET
CREDITS
FACTORY
RESET
Note: At time of printing, this
Menu was not available. When
this Menu becomes activated
with updated Game Code or
Special Tournament Game
Code, look for a Manual
Addendum and / or Service
Bulletin outlining this feature
(available through your
Distributor when completed).
This Menu will allow a simple
method of setting up the game for
Prize Tournaments. Optional
equipment will be required.
6HF0HQX,QWUR
^ M O R E _ I N S TA L L S M E N U C O N T I N U E D
E X I T S P O R TA L S ™
E X I T S P O R TA L S ™
////////////////////////////////
EXPLANATION & USAGE OF COMMON LARGE & MINI-ICONS USED IN VARIOUS MENUS & SUB-MENUS:
These non-selectable
Icons appear in the
selected Menu only when
there are MORE Icons to
the LEFT or to the RIGHT
available for selection.
Select and activate Select and activate Select and activate
to QUIT, exits &
to view HELP
to return to the
PREVIOUS Menu.
returns to the
Screens of the
Attract Mode.
current Menu.
Select and activate to:
Move LEFT or RIGHT, select previous / next or
move backwards / forwards.
DECREMENT (-) or INCREMENT (+) displayed
value or select previous / next.
RUN (or activate) selected test or coil.
PULSE coil.
View the schematic (DRAWing) of current display.
Select while current switch, lamp or coil is viewed.
Answer NO or YES for Flow Chart Menu questions
in the Dr. Pinball Menus.
END current coil selection to select a new coil for
diagnosing in the Dr. Pinball Menus.
Note: If a new MINI-ICON is used for a specific function, select the "?" Icon for more information.
3RUWDOV• 6HUYLFH
0HQX,QWURGXFWLRQ
6HFWLRQ&KDSWHU
3DJH
3RUWDOV • 6HU YLFH0HQX([DPSOH
This example will demonstrate activation of Icons in the DIAGNOSTICS MENU. The example will show activation
of the "SW" Icon (GO TO SWITCH MENU). In this menu, the switches can be tested individually and also all
active switches can be tested. Use the same technique to access all the Icons in the Portals• Service Menu.
Follow Portals• Service Menu Icon Tree on the previous pages as a guide to help navigate through the entire
system (Also, go to the chapter in this manual explaining the icon(s) selected.).
D
If the display is in any other menu other than the MAIN MENU, use the Red "LEFT" & Green "RIGHT" Buttons
to select the "PREV" Icon and press the Black "ENTER" Button to activate the ICON thus moving back to the
previous menu. Do so until MAIN MENU appears.
Chapters 2 through 7 will cover all menu items within the Portals• Service Menu. The Icon is shown preceding
the text. Find the Icon in the Portals• Service Menu by navigating with the Red or Green Buttons. Each chapter
started is from the MAIN MENU. Within the chapter, and Sub-Menu will be covered sequentially with their
explanation & function. If the operator "gets lost", select and activate the "PREV" Icon until the display indicates
MAIN MENU. For more help on Button Usage, select & activate the "HELP" Icon or "?" Mini-Icons.
6HF0HQX,QWUR
([ DPSOH
After entering Portals• , the MAIN MENU now appears with the "DIAG" Icon (GO TO DIAGNOSTICS MENU)
flashing:
Press the Black "ENTER" Button to activate this ICON. The DIAGNOSTICS MENU now appears with the
"SW" Icon (GO TO SWITCH MENU) flashing:
6HFWLRQ&KDSWHU
3DJH
3RUWDOV• 6HUYLFH
0HQX,QWURGXFWLRQ
Press the Black Button to activate this ICON. The SWITCH TEST MENU now appears with the "TEST" Icon
(SWITCH TEST) flashing:
All switches can be tested one at a time. When possible, use a pinball to close any playfield switches; rolling the
ball at Stand-Up Targets or over/under switches is suggested. Use finger for all non-playfield switches. As each
switch is closed, the respective Switch Matrix Grid Position (1-64) will be lit.
To view the schematic for the switch selected, press either the Red or Green Button to select the "DRAW"
Mini-Icon. Press the Black Button to activate this Mini-Icon; do so while the switch is momentarily closed.
This will bring up the Switch Schematic Display. The display describes the switch in the Switch Matrix which
includes the name of the switch, the Return (Row) Wire and the Drive (Column) Wire, drive transistor, and the
"Pin-Outs" from the CPU/Sound Board. Activating the "DRAW" Icon when a switch is not closed, will give the
generic switch schematic as shown below.
To exit any display where there are no Mini-Icons (Schematics or Help Displays), press any button to return to
the previous Menu.
While in Switch Test or Active Switch Test, the Flipper & Start Buttons are deactivated (because they can be
part of these tests). Use the Red "LEFT," Green "RIGHT" and/or Black "ENTER" Buttons to select and
activate the "MINI-ICONS" at the bottom of the display. In Switch Test, if the "<<" or ">>" Mini-Icon is activated,
the display will go to (slip between) the previous tests (Active & Dedicated Switch Tests). Use either the Red or
Green Button to select the "PREV" Mini-Icon. Press the Black "ENTER" Button to return to Switch Test Menu.
To exit out of this Sub-Menu, select and activate the "PREV" Icon in the Menu. The DIAGNOSTICS MENU now
appears with the "SW" Icon (GO TO SWITCH MENU) flashing. Go through other Diagnostics selections or exit.
To exit the Portals Service Menu, select & activate the "QUIT" Icon (see the next page).
3RUWDOV• 6HUYLFH
0HQX,QWURGXFWLRQ
6HFWLRQ&KDSWHU
3DJH
6HF0HQX,QWUR
Press the Black "ENTER" Button to activate this icon. The Switch Test Display now appears.
48,77+,66(66,21([LWLQJWKH3R UWDOV 6HU YLFH0HQX
•
In the MAIN MENU and in all SUB-MENUS, if the "QUIT" Icon or "QUIT" Mini-Icon is selected and
activated, the Portals• Service Menu Session will be exited and returned to the Attract Mode.
D
The game will go into the same Power-Up Routine as if turning on the game. Upon Power-Up, the CPU Game
Code & Display Code versions with Check-Sums are shown, followed by the Location ID & Game ID Numbers
and Alerts, if any (see Section 3, Chapter 2, GO TO DIAGNOSTICS MENU, Technician Alerts).
The below Problem / Solution Table was designed to answer some common problems frequently asked.
3UREOHP6ROXWLRQ7DEOH
PROBLEM
6HF0HQX,QWUR
Will not enter the Service Mode
after depressing the Black
"BEGIN TEST" Button.
All Service Buttons (Red, Green
and Black) appear nonfunctional.
The Green Service Button in
the Attract Mode will not enter
the SERVICE CREDITS MENU
to add Service Credits.
The Display "blanks out."
Icons "scroll" along continuously
in the MAIN MENU.
The Start and Flipper Buttons
do not select or activate Icons in
the SWITCH TEST MENU.
Can’t move selection of Icon with
the Left and/or Right Flipper
Buttons.
Some Icons appear
non-functional in the PRINTER
MENU(S).
Some Icons appear
non-functional in the GAME
SPECIFIC MENU under the
DIAGNOSTICS MENU.
The display returns to the
ATTRACT MODE exiting the
Service Session after a
FACTORY RESET.
In COIL TEST MENU, the coils
and flashlamps do not fire after
activating the "RUN" Icon.
In ADJUSTMENTS MENU, with
the Coin Door CLOSED,
adjustments are not getting
changed as desired (using the
Flipper & Start Buttons).
In Portals• Service Menu, the
volume cannot be adjusted with
the Red or Green Buttons.
In Portals• Service Menu, the
display seems to lock up, or the
Help Display appears to be
non-functional.
6HFWLRQ&KDSWHU
3DJH
SOLUTION
x Check the Service Switch(es) (Red, Green & Black Buttons) for loose connections or bad Ground.
x Check the associated wiring harness to/from the CPU/Sound Board, Connector CN6.
x Check CPU/Sound Board for possible failure.
x Check the Service Switches wiring harness for poor or no connection and/or broken wires.
x Check to make sure the Game is not in "Free Play." If the game is set to Free Play, adding Service
Credits is not required.
x Check the Service Switches wiring harness for poor
or no connection and/or broken wires.
x Check the Dot Matrix Display for loose wiring harness for poor or no connection and/or broken wires.
x Check F1 (3/4A Fuse) on the Display Power Supply Board. Refer to Sec. 5, Chp. 4, SCHEMATICS &
TROUBLESHOOTING.
x Check for a stuck switch on the Green Button.
x If the Service Switch Set and/or the Coin Door was replaced, ensure the Locking Mechanism on the
Green Button was removed. If the Green Button "clicks" and locks into an up/down position, the
Green Button has this lock switch. Remove it. (Ref. to Svc. Bulletin #74.)
x This is normal. These switches are deactivated, as they are a part of the Switch Test. Use the Red
"LEFT" or Green "RIGHT" & Black "ENTER" Buttons in this Sub-Menu. Refer to Section 3,
Chapter 2, GO TO DIAGNOSTICS MENU, Switch Test.
x Check the Flipper Buttons for loose connections or bad Ground and refer to Section 5, Chapter 2,
Playfield Wiring, #-Flipper Circuit Wiring Diagram.
x This is normal only in Diagnostic’s Switch & Active Switch Tests (see previous Problem).
x If no printing equipment is connected, the "-" Icon, "+" Icon and "RUN" Icon will appear not to function.
Refer Section 3, Chapter 3, GO TO PRINTER MENU.
x If there is no other test under this Menu, the "<<" & ">>" Mini-Icons will appear not to function. The
remaining Icons should function as normal. Note: If there is no "Go To (Game Name) Test(s), the
"GAME NAME" Icon will not invoke another display.
x This is normal. After a FACTORY RESET, the Service Session is automatically exited. Refer to
Sec. 3, Chp. 6, GO TO RESET MENU, Factory Reset.
x Ensure the POWER INTERLOCK SWITCH is pulled out (see the start of this Chapter).
x This is normal. The Memory Protect Switch is enabled when the Coin Door is CLOSED. Changes
can be made with the Coin Door OPEN only.
x The Volume adjustment can only be made when in the Attract Mode. The Volume Mode is entered
by pressing the Red "VOLUME" Button. Then use the Red "LEFT" to decrease / decrement (-) or
Green "RIGHT" Button to increase / increment (+) the volume.
x If you cannot clear the situation by exiting back one Menu, exit completely out of the Portals•
Service Menu, and re-enter. If the problem persists, call Technical Support for additional help.
3RUWDOV• 6HUYLFH
0HQX,QWURGXFWLRQ
6HFWLRQ &K DS WHU RI *R 7R' L DJQR VWLFV0H QX
2YHU YL HZ
The Portals• Service Menu System provides tests for sounds, display, lamps, switches and coils. Each feature
may be tested manually or automatically after entering the Portals• Service Menu (see Chapter 1 of this Section).
The automatic tests (e.g. Cycling Coils, Test Flash Lamps) may be used for a quick verification of automatic test
functions and the manual tests (Begin Play Test, Single Lamp / All / Row / Column Tests, and ’Game Name’
Tests) may be used for troubleshooting. All Icons and there usages are explained throughout this chapter in order.
Important: Upon Power-up, opening the Coin Door or exiting Portals• , watch the Display for any Alerts.
If this display flashes, the game is indicating that CMOS RAM memory
(CPU Loc. U212) has been corrupted. This is caused be either failure in
memory (e.g. batteries are dead and/or faulty RAM) or upon installation
of updated version of game code. Opening the Coin Door will initiate a
Factory Restore (Reset), by opening the Memory Protect Switch.
Check battery voltage at VBATT Test Point on the CPU/Sound Bd. (more details in Sec. 5, Chp. 4, PCBs).
This display is shown momentarily during Game Mode or Power-Up to
alert the operator of a coil malfunction (coil doesn’t energize or coil fires
a multiple number of times). OPERATOR ALERT! works by monitoring
any switch activated coil that has the potential to trap a ball when
disabled (more details in this Chapter, Technician Alerts, Pages 24-25).
If this display flashes (along with an audible sound), the game has
detected faulty switches and/or missing pinballs. To check, enter the
Portals• Service Menu System, select the "DIAG" Icon (GO TO
DIAGNOSTICS MENU) from the MAIN MENU and select the "TECH"
Icon (more details in this Chapter, Technician Alerts, Pages 24-25).
CAUTION: Remove pinballs from the Ball Trough prior to lifting the playfield for servicing. This can easily be
done in the Portals• Service Menu System. Select the "DIAG" Icon from the MAIN MENU to go to the
DIAGNOSTICS MENU, then select the "CLR" Icon to enter the CLEAR BALL TROUGH MENU. Select the "RUN"
Mini-Icon & press the Start Button to remove one ball at a time. This is also useful to retrieve one ball for game
testing in Begin Play Test & ’Game Name’ Tests. PULL OUT the Power Interlock Switch for operation.
* 2 7 2' , $* 1 267 , & 6 0 ( 1 8
After entering Portals• , the MAIN MENU now appears. To initiate, from the MAIN MENU, select the
"DIAG" Icon with either the Red "LEFT" or Green "RIGHT" Buttons (the Flipper Buttons operates in
the same manner) and press the Black "ENTER" Button (the Start Button operates in the same
manner). The DIAGNOSTICS MENU appears. Continue through this chapter for the explanation & usage of the
Icons in the DIAGNOSTICS MENU. Usage Note: Only in Switch & Active Switch Tests, the Flipper & Start
Buttons cannot be used as the alternate navigation buttons as they are a part of these tests. After exiting these
tests, the Left & Right Flipper and Start Buttons can once again be used. Continue through this chapter for the
explanation & usage of the Icons in the DIAGNOSTICS MENU.
*R7R
'LDJQRVWLFV0HQX
6HFWLRQ&KDSWHU
3DJH
6HF'LDJQRVWLFV
This flashing display is shown immediately upon opening the Coin
Door as a reminder that 20v/50v DC power to the playfield is disabled.
All electro-mechanical devices (such as Coils) cannot be tested with
the switch pushed in. PULL OUT the Power Interlock Switch ONLY if
you’re in a Testing Menu requiring power. See Access & Use in
Chapter 1 of this Section for the location of this switch. Closing the Coin Door will automatically reset this switch.
*R7R6ZLWFK0HQX
To initiate, from the DIAGNOSTICS MENU, select the "SW" Icon with either the Red "LEFT" or Green
"RIGHT" Buttons and press the Black "ENTER" Button. Switches are configured in an 8 x 8 Matrix of
Columns (Switch Drives) and Rows (Switch Returns) with up to 64 possible switches. The SWITCH
TEST MENU consists of three (3) parts: Switch Test, Active Switches & Dedicated Switch Test. Reminder:
The Flipper & Start Buttons (part of Switch Tests) cannot be used as navigation buttons during these test(s)
D
6ZLWFK7HVW
To initiate, from the SWITCH MENU, select the "TEST" Icon with either the Red or Green Buttons &
press the Black Button. In Switch Test, close each switch and observe the display. The display will
describe the switch in the Switch Matrix, which includes the switch name, Return (Row) Wire, Drive
(Column) Wire and the "Pin-Outs" from the CPU/Sound Board. When the switch is closed, the information if
displayed momentarily. To view the schematic for the switch selected, press either the Red or Green Button to
select the "DRAW" Mini-Icon. Press the Black Button to activate this Mini-Icon; do so while the switch is
momentarily closed. To return to Switch Test, press the Black Button again.
$F WLYH6ZLWF K7HV W
To initiate, from the SWITCH MENU, select the "ACT" Icon with either the Red or Green Buttons & press
the Black Button. If still in a previous test, select the "PREV" Mini-Icon to return to SWITCH MENU or
select either of the "<<" or ">>" Mini-Icons to move through the tests. In Active Switch Test, if any
switches are stuck closed (or made from the presence of a pinball), the display sequences through the Switch
Names, Return (Row) Wire, Drive (Column) Wire, Drive Transistor, Part Number and the "Pin-Outs" from the
CPU/Sound Board. This cycle continues until all switches are cleared or until the test is exited.
'H GLFDWHG6ZLWF K7HV W
6HF'LDJQRVWLFV
To initiate, from the SWITCH MENU, select the "DED" Icon with either Flipper Button & press the Start
Button (the Service Switches are deactivated during this test.). In Dedicated Switch Test, the display
will describe the switch which includes the Switch Name, Return (Row) Wire, Drive (Column) Wire, Part
Number and the "Pin-Outs" from the CPU/Sound Board.
6:,7&+0$75,;*5,''(',&$7('6:,7&+(6
D iode O n T erminal S trip :
&ROXPQ
'ULYH
5RZ
5HWXUQ
8
127 86('
:+7%51
&13
8
127 86('
:+75('
&13
8
127 86('
:+725*
&13
8
127 86('
:+7<(/
&13
8
127 86('
:+7*51
&13
8
127 86('
:+7%/8
&13
8
127 86('
:+79,2
&13
8
127 86('
:+7*5<
&13
4
127 86('
*51%51
&13
LEFT
BUTTON
(UK ONLY)
on Cabinet side
4TH
COIN
SLOT
On Coin Door
6TH
COIN
SLOT
On Coin Door
RIGHT
COIN
SLOT
On Coin Door
CENTER
COIN SLOT
/ DBA
On Coin Door
LEFT
COIN
SLOT
On Coin Door
5TH
COIN
SLOT
On Coin Door
RIGHT
BUTTON
(UK ONLY)
on Cabinet side
4
127 86('
*515('
&13
SKILL
SHOT
Under Playfield
RIGHT
ORBIT
Under Playfield
4-BALL
TROUGH #1
(LEFT)
On Assembly
4-BALL
TROUGH #2
On Assembly
4-BALL
TROUGH #3
On Assembly
4-BALL
TROUGH
VUK OPTO
On Assembly
4-BALL
STACKING
OPTO
On Assembly
SHOOTER
LANE
Under Playfield
4
127 86('
*5125*
&13
RIGHT
RAMP
ENTER
On Ramp Assy.
RIGHT
RAMP
EXIT
On Ramp Assy.
CENTER
LANE
Under Playfield
NOT
USED
Under Playfield
CENTER
RAMP
EXIT
On Ramp Assy.
LEFT
TOP
LANE
Under Playfield
MIDDLE
TOP
LANE
Under Playfield
RIGHT
TOP
LANE
Under Playfield
POP
BUMPER
EXIT
Under Playfield
DROP
TARGET
On Assembly
LEFT
ORBIT
Under Playfield
Under Playfield
TRIANGLE
MECH 1
(RIGHT)
On Assembly
TRIANGLE
MECH 2
(LEFT)
On Assembly
On Assembly
'
2
7 GROTTO
6 EJECT
Under Playfield
Under Playfield
PEEK-A-BOO
TARGET
On Assembly
VUK
On Assembly
NOT
USED
On Ramp Assy.
On Ramp Assy.
RAMP
BALL
LOCK 3
On Ramp Assy.
RAMP
BALL
LOCK 1
On Ramp Assy.
RAMP
BALL
LOCK 2
On Ramp Assy.
4
127 86('
*51%/8
&13
LEFT
RAMP
ENTER
On Ramp Assy.
4
127 86('
*519,2
&13
LEFT
BUMPER
On Assembly
LEFT
RAMP
EXIT
RIGHT
BUMPER
On Ramp Assy. On Assembly
'
2
7 CENTERFOLD 1 BOTTOM
6 (CLOSED)
BUMPER
On Assembly
On Assembly
TEASE
CENTERFOLD 2 SCREW
(OPEN)
LIMIT
On Assembly
On Assembly
NOT
USED
NOT
USED
4
127 86('
*51%/.
&13
SURPRISE
PAKAGE
TARGET
NOT
USED
7\SLFDO 6ZLWFK 6FKHPDWLF :LULQJ
6HFWLRQ&KDSWHU
3DJH
4
127 86('
*51<(/
&13
NOT
USED
Under Playfield
NOT
USED
Under Playfield
On Assembly
On Assembly
TOURNAMENT
BUTTON
START
BUTTON
Cabinet Front
On Coin Door
NOT
USED
NOT
USED
Cabinet Front
NOT
USED
PLUMB
BOB
TILT
Inside Cabinet
4
127 86('
*51*5<
&13
LEFT
OUTLANE
Under Playfield
LEFT
RETURN
LANE
Under Playfield
LEFT
SLINGSHOT
On Assembly
RIGHT
OUTLANE
Under Playfield
RIGHT
RETURN
LANE
Under Playfield
RIGHT
SLINGSHOT
On Assembly
NOT
USED
NOT
USED
Note:
All Switch, Lamp & Coil assemblies require
diodes. Some diodes are located under the
playfield on Terminal Strips or Diode Boards
and not on the assemblies.
D iode O n
T erminal S trip
or
D iode O n
D iode B oard
*1'
,&
8
,13876
8
*5<%51
&13
8
*5<5('
&13
8
*5<25*
&13
8
*5<<(/
&13
8
127 86('
*5<*51
&13
8
*5<%/8
&13
8
*5<9,2
&13
8
*5<%/.
&13
*URXQG
%/.
&13 3
#1 LEFT
FLIPPER
BUTTON
in Cabinet side
#2 LEFT
FLIPPER E.O.S
(End-of-Stroke)
in Cabinet side
#3 RIGHT
FLIPPER
BUTTON
in Cabinet side
#4 RIGHT
FLIPPER E.O.S.
(End-of-Stroke)
in Cabinet side
#5
NOT
USED
in Cabinet side
'6
'6
'6
'6
'6
#6 VOLUME
(RED BUTTON)
(In Test: LEFT)
'6
#7 SERV. CRED.
(GREEN BUTTON)
(In Test: RIGHT)
on Coin Door
'6
#8 BEGIN TEST
(BLACK BUTTON)
(In Test: ENTER)
on Coin Door
'6
on Coin Door
'HGLFDWHG 6ZLWFK 6FKHP
*R7R
'LDJQRVWLFV0HQX
6ZLWFK0DWUL[*ULG'HVFULSWLRQVZLWK3DUW1XPEHUVDQG/RFDWLRQV
The Switch locations correspond with the Switch Nº in the Part Number Table shown & the Switch Matrix Grid (previous page).
14
15
'6
'6
'6
1
2
3
4
5
6
7
8
9
10
11
12
13
Legend Note:
= Switches mounted above playfield.
'6
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
DOTS: Diode On Terminal Strip or DODB: Diode On Diode Board.
59
Note 1: Sw. 14 / Sw. 15 have both REC/TRANS on same board.
60
Note 2: For more details, see Sec. 4, Chp. 1, Playfield - Gen. Parts... 61
Note 3: Switch sold only with Bracket and/or Target.
Note 4: Switch Only. For entire Button Assembly, see Sec. 4, Chp. 1, 62
63
Cabinet - General Parts & Switches.
Note 5: Switch located in/on Cabinet.
64
Note 6: Future Use.
Note 7: UK Only.
DS:
= Switches mounted below playfield.
*R7R
'LDJQRVWLFV0HQX
6ZLWFK 0DWUL[ 'HVFULSWLRQ
3DUW Nº
Note: The ¥ Coin Switch (for Japan) is 180-5091-00
180-5160-00
1 1 LEFT BUTTON (UK ONLY)
4TH COIN SLOT
180-5024-00
1 2
(Future Use)
1 3 6TH COIN SLOT
RIGHT COIN SLOT
1 4
180-5024-00
CENTER COIN SLOT / DBA
1 5
LEFT COIN SLOT
1 6
(UK Only)
1 7 5TH COIN SLOT
180-5160-00
1 8 RIGHT BUTTON (UK ONLY)
2 1 '276 SKILL SHOT
500-6227-02
2 2 '276 RIGHT ORBIT
'276
4-BALL TROUGH #1 (LEFT)
2 3
180-5119-02
2 4 '276 4-BALL TROUGH #2
2 5 '276 4-BALL TROUGH #3
4-BALL TROUGH
BOT TRANS:
515-5173-00
2 6
VUK OPTO
BOT REC:
515-5174-00
4-BALL
TOP TRANS:
515-5173-00
2 7
STACKING OPTO
TOP REC:
515-5174-00
180-5157-00
2 8 '276 SHOOTER LANE
180-5190-28
3 1 RIGHT RAMP ENTER
180-5190-48
3 2 RIGHT RAMP EXIT
180-5190-28
3 3 CENTER LANE
NOT USED
3 4 '276
180-5190-48
3 5 CENTER RAMP EXIT
3 6 LEFT TOP LANE
3 7 MIDDLE TOP LANE
500-6227-02
3 8 RIGHT TOP LANE
4 1 POP BUMPER EXIT
180-5158-00
4 2 '276 DROP TARGET
500-6227-01
4 3 LEFT ORBIT
NOT USED
4 4 TRIANGLE MECH 1 (RIGHT)
4 5
180-5189-00
TRIANGLE MECH 2 (LEFT)
4 6
NOT USED
4 7
500-6148-01
4 8 PEEK-A-BOO TARGET
515-5967-02
5 1 SURPRISE PACKAGE TARGET
180-5186-00
5 2 '276 GROTTO EJECT
180-5116-01
5 3 '276 VUK
NOT USED
5 4 '276
NOT USED
5 5 '276
5 6 '276 RAMP BALL LOCK 3
180-5119-02
5 7 '276 RAMP BALL LOCK 1
5 8 '276 RAMP BALL LOCK 2
180-5190-28
6 1 '276 LEFT RAMP ENTER
180-5190-48
6 2 '276 LEFT RAMP EXIT
6 3 '276 CENTERFOLD 1 (CLOSED)
180-5119-00
CENTERFOLD 2 (OPEN)
6 4
NOT USED
6 5 '276
NOT USED
6 6
NOT USED
6 7
NOT USED
6 8 7 4 '276 LEFT BUMPER
180-5015-03
7 2 '276 RIGHT BUMPER
7 3 '276 BOTTOM BUMPER
180-5190-48
7 4 '276 TEASE SCREW LIMIT
7 5 TOURNAMENT BUTTON Switch Only
180-5174-00
Switch Only
7 6 START BUTTON
NOT USED
7 7
HANGER 535-5319-00
7 8
PLUMB BOB TILT
CONTACT 535-7563-01
on Rt. Mount R/O
8 1 LEFT OUTLANE
500-6227-02
8 2 LEFT RETURN LANE on Rt. Mount R/O
LEFT SLINGSHOT
180-5054-00
Leaf Sw. X2
8 3
on Rt. Mount R/O
8 4 RIGHT OUTLANE
500-6227-02
8 5 RIGHT RETURN LANEon Rt. Mount R/O
RIGHT SLINGSHOT
180-5054-00
Leaf Sw. X2
8 6
NOT USED
8 7 '276
NOT USED
8 8 '276
Dedicated Switches descriptions on previous page.
6HFWLRQ&KDSWHU
3DJH
6HF'LDJQRVWLFV
Sw. Col. Row 6HH
Nº Nº Nº 1RWHV
*R7R&RL O0HQX
D
To initiate, from the DIAGNOSTICS MENU, select the "COIL"
Icon with either the Red "LEFT" or Green "RIGHT" Buttons
and press the Black "ENTER" Button. The coils are listed in
groups. Coils 01-16 are typically High Current Coils (although Low
38// 287 WKH 3RZHU ,QWHUORFN 6ZLWFK
Current Coils may be used in these positions & will be noted). Coils
IRU RSHUDWLRQ ZLWK WKH &RLQ 'RRU RSHQ
17-32 are typically Low Current Coils. Flash Lamps are typically used in
positions 26-32 (although may be used in any position & will be noted).
Important: For more on troubleshooting & diagnosing, see Section 5, Chapter 4, Printed Circuit Boards.
6LQJOH&RLO7H VW
To initiate, from the COIL MENU, select the "TEST" Icon with either the Red or Green Buttons and
press the Black Button. Ensure the Power Interlock Switch is pulled out. Select either the "-" or "+"
Mini-Icons. Start with the "+" Mini-Icon to start the manual Single Coil Test from #1 (the test runs
through all Coils and Flash Lamps #1-#32 & Optional UK Only Auxilliary Positions AUX 1-3). Press the Black
Button on the "+" Mini-Icon, as each coil is selected, the display will describe the Coil or Flash Lamp Name with
the corresponding number, the wire with colors, the "Pin-Outs" from the I/O Power Driver Board, the Coil Voltage
and Gauge-Turns (e.g. 23-800). Press the Black Button again to move forward in the test. To test and view a
particular Coil or Flash Lamp, select the "RUN" Mini-Icon and press the Black Button. Each time the Black
Button is pushed, the Coil or Flash Lamp will fire on the Playfield and/or Backbox, with the display indicating the
Coil or Flash Lamp information. Continue with the same procedure to run through the entire test.
&\FOLQJ&RLO7HVW
6HF'LDJQRVWLFV
To initiate, from the COIL MENU, select the "CYC" Icon with either the Red or Green Buttons and press
the Black Button. If still in a previous test, select the "PREV" Mini-Icon to return to COIL MENU or
select either of the "<<" or ">>" Mini-Icons to move to Cycling Coil Test (selecting again will return to
Coil Test). The test pulses each regular Coil or Flash Lamp sequentially (cycling) on the Playfield and in the
Backbox (if Coils are used). The display indicates CYCLING COILS.
7\SH
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Coil
Coil
Coil
Coil
Coil
Coil
Coil
Coil
Coil
Coil
Coil
Coil
Coil
Coil
Coil
Coil
&RLO)ODVK/DPS'HVFULSWLRQV
&RLO )ODVK /DPS 'HVFULSWLRQV
7\SH
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
TROUGH UP-KICKER (VUK) (26-1200)
AUTO LAUNCH (23-700)
BALL LOCK POST (27-1500)
LEFT ORBIT POST (26-1200)
DROP TARGET (27-1500)
CENTER LANE POST (26-1200)
BEAD SCREEN LEFT (26-1200)
BEAD SCREEN RIGHT (26-1200)
LEFT BUMPER (26-1200)
RIGHT BUMPER (26-1200)
BOTTOM BUMPER (26-1200)
GROTTO EJECT (26-1200)
VUK (26-1200)
MAGAZINE POST (24-940)
LEFT FLIPPER [50V RED/YEL] (23-1100)
RIGHT FLIPPER [50V RED/YEL] (23-1100)
Coil
Coil
Coil
Coil
Coil
Coil
Coil
Coil
Flash
Flash
Flash
Flash
Flash
Coil
Coil
Coil
&RLO )ODVK /DPS 'HVFULSWLRQV
LEFT SLINGSHOT (23-800)
RIGHT SLINGSHOT (23-800)
DROP SCREEN STEPPER #1 (Stepper Motor)
DROP SCREEN STEPPER #2 (Stepper Motor)
DROP SCREEN STEPPER #3 (Stepper Motor)
TRIANGLE BILLBOARD (Relay Board)
DROP SCREEN STEPPER #4 (Stepper Motor)
(OPTIONAL COIN METER)
FLASH: TRIANGLE X1 (#89 Bulb)
FLASH: MIRROR X4 (#906 Bulb)
FLASH: BACK LT X1 BACK RT X1 (#906 Bulb)
FLASH: LT SLINGSHOT X1 (#906 Bulb)
FLASH: RT SLINGSHOT X1 (#906 Bulb)
FLASH: TRIPLE JACKPOT X1 (#89 Bulb)
CENTERFOLD ON/OFF (DC Relay Board)
CENTERFOLD OPEN/CLOSE (DC Relay Bd.)
See the next three (3) pages for the Coil & Flash Lamp Location Maps (corresponds to above tables),
Coils Detailed Chart Table & the Backbox I/O Power Driver Board Detailed Wiring Diagram.
Note: All Switch, Lamp & Coil assemblies require diodes. Some diodes are located under the playfield on Terminal Strips or Diode Boards and not on the assemblies. D iode O n T erminal S trip or D iode O n D iode B oard
7\SLFDO &RLO :LULQJ
$QRGH 1RQ
%DQGHG 6LGH
'ULYH
7UDQVLVWRU
6HFWLRQ&KDSWHU
3DJH
1N4004
&DWKRGH
%DQGHG 6LGH
3RZHU 6XSSO\
9ROWDJH
*R7R
'LDJQRVWLFV0HQX
&RLO)ODVK/DPS/RFDWLRQV
6HF'LDJQRVWLFV
$8; $8; $8; Use the previous page and the following two (2) pages in conjunction with above Coil and Flash Lamp Maps.
Legend Note:
The following Bulb Types are used for Flash Lamps:
= Coils and Flash Lamps mounted
above playfield.
= Coils and Flash Lamps mounted
below playfield.
The following Coil is optional:
*R7R
'LDJQRVWLFV0HQX
The following Coils are for UK Only:
#89 Bulb
#906 Bulb
(Bayonet)
165-5000-89
(Wedge Base)
165-5004-00
All Coil Positions are used.
$X[ $X[ $X[ 6HFWLRQ&KDSWHU
3DJH
,Q &2,/ 0(18
DOVR VHOHFW
&<&/,1*
&2,/
7(67
+LJK &XUUHQW &RLOV *URXS &2,/6'(7$,/('&+$577$%/(
Drive Transistor (D.T.)
Driver
Ouput Board
D.T. Control
Line Color
D.T. Control
Line Connect
Power
Line Color
Power Line
Connnection
Power
Voltage
Coil GA-Turn
or Bulb Type
D
26-1200
#1
TROUGH UP-KICKER
Q1
I/O Pwr. Drvr.
BRN-BLK
J8-P1
YEL-VIO
J10-P4/5
50v DC
090-5044-00T
#2
AUTO LAUNCH
Q2
I/O Pwr. Drvr. BRN-RED
J8-P3
YEL-VIO
J10-P4/5
50v DC
090-5022-00T
#3
BALL LOCK POST
Q3
I/O Pwr. Drvr. BRN-ORG
J8-P4
BRN
J7-P1
20v DC
#4
LEFT ORBIT POST
Q4
I/O Pwr. Drvr.
BRN-YEL
J8-P5
BRN
J7-P1
20v DC
090-5044-00T
#5
DROP TARGET
Q5
I/O Pwr. Drvr. BRN-GRN
J8-P6
YEL-VIO
J10-P4/5
50v DC
090-5004-00B
#6
CENTER LANE POST
Q6
I/O Pwr. Drvr.
BRN-BLU
J8-P7
BRN
J7-P1
20v DC
#7
BEAD SCREEN LEFT
Q7
I/O Pwr. Drvr.
BRN-VIO
J8-P8
YEL-VIO
J10-P4/5
50v DC
090-5044-00T
#8
BEAD SCREEN RIGHT
Q8
I/O Pwr. Drvr. BRN-GRY
J8-P9
YEL-VIO
J10-P4/5
50v DC
090-5044-00T
Coil GA-Turn
+LJK &XUUHQW &RLOV *URXS 23-700
27-1500
090-5004-00T
26-1200
27-1500
26-1200
090-5044-00T
26-1200
26-1200
Drive Transistor (D.T.)
Driver
Ouput Board
D.T. Control
Line Color
D.T. Control
Line Connect
Power
Line Color
Power Line
Connnection
Power
Voltage
Q9
I/O Pwr. Drvr.
BLU-BRN
J9-P1
YEL-VIO
J10-P4/5
50v DC
#10 RIGHT BUMPER
Q10
I/O Pwr. Drvr.
BLU-RED
J9-P2
YEL-VIO
J10-P4/5
50v DC
090-5044-00T
#11 BOTTOM BUMPER
Q11
I/O Pwr. Drvr. BLU-ORG
J9-P4
YEL-VIO
J10-P4/5
50v DC
090-5044-00T
#12 GROTTO EJECT
Q12
I/O Pwr. Drvr.
BLU-YEL
J9-P5
YEL-VIO
J10-P4/5
50v DC
#13 VUK
Q13
I/O Pwr. Drvr. BLU-GRN
J9-P6
YEL-VIO
J10-P4/5
50v DC
090-5044-00T
#14 MAGAZINE POST
Q14
I/O Pwr. Drvr.
BLU-BLK
J9-P7
J7-P1
20v DC
090-5036-00B
#15 LEFT FLIPPER (50v RED/YEL)
Q15
I/O Pwr. Drvr. ORG-GRY
J9-P8
J10-P1/2
50v DC
#16 RIGHT FLIPPER (50v RED/YEL)
Q16
I/O Pwr. Drvr.
ORG-VIO
J9-P9
BRN
RED-YEL
GRY-YEL
RED-YEL
BLU-YEL
J10-P1/2
50v DC
090-5030-00T
Drive Transistor (D.T.)
Driver
Ouput Board
D.T. Control
Line Color
D.T. Control
Line Connect
Power
Line Color
Power Line
Connnection
Power
Voltage
Coil GA-Turn
or Meter #
Q17
I/O Pwr. Drvr.
VIO-BRN
J7-P2
BRN
J7-P1
20v DC
090-5001-00T
Q18
I/O Pwr. Drvr.
VIO-RED
J7-P3
J7-P1
20v DC
Q19
I/O Pwr. Drvr.
RED
J7-P4
J16-P3
Q20
I/O Pwr. Drvr.
GRN
J7-P6
Mtr.
20v DC Stepr.
041-5062-00
20v DC Stepr. Mtr.
Q21
I/O Pwr. Drvr.
BLK
J7-P7
Q22
I/O Pwr. Drvr.
VIO-BLU
J7-P8
Q23
I/O Pwr. Drvr.
BLU
J7-P9
Q24
I/O Pwr. Drvr.
VIO-GRY
J7-P10
BRN
GRY-RED
to WHT
GRY-RED
to WHT
GRY-RED
to WHT
BRN
GRY-RED
to WHT
RED
J16-P7
Drive Transistor (D.T.)
Driver
Ouput Board
D.T. Control
Line Color
D.T. Control
Line Connect
Power
Line Color
Power Line
Connnection
Power
Voltage
#25 FLASH: TRIANGLE X1
Q25
I/O Pwr. Drvr.
BLK-BRN
J6-P1
ORG
J6-P10
20v DC
#26 FLASH: MIRROR X4
Q26
I/O Pwr. Drvr.
BLK-RED
J6-P2
ORG
J6-P10
#27 FLASH: BACK LT X1 BACK RT X1
Q27
I/O Pwr. Drvr. BLK-ORG
J6-P3
ORG
J6-P 10
Bulb
20v DC #906
165-5004-00
20v DC #906 Bulb
#28 FLASH: LT SLINGSHOT X1
Q28
I/O Pwr. Drvr.
BLK-YEL
J6-P4
ORG
J6-P10
#29 FLASH: RT SLINGSHOT X1
Q29
I/O Pwr. Drvr. BLK-GRN
J6-P5
ORG
J6-P10
Bulb
20v DC #906
165-5004-00
20v DC #906 Bulb
#30 FLASH: TRIPLE JACPOT X1
Q30
I/O Pwr. Drvr.
BLK-BLU
J6-P6
ORG
J6-P10
20v DC
#31 CENTERFOLD ON/OFF
Q31
I/O Pwr. Drvr.
BLK-VIO
J6-P7
BRN
J7-P1
Relay
20v DC DC
520-5066-00
(Motor)
20v DC
#9
LEFT BUMPER
6HF'LDJQRVWLFV
/RZ &XUUHQW &RLOV *URXS #17 LEFT SLINGSHOT
#18 RIGHT SLINGSHOT
#19 DROP SCREEN STEPPER #1
#20 DROP SCREEN STEPPER #2
#21 DROP SCREEN STEPPER #3
%$
%$
%$
#22 TRIANGLE BILLBOARD
#23 DROP SCREEN STEPPER #4
%$
#24 OPTIONAL COIN METER
J16-P3
J16-P3
J7-P1
J16-P3
26-1200
090-5044-00T
26-1200
26-1200
26-1200
090-5044-00T
26-1200
24-940
23-1100
090-5030-00T
23-1100
23-800
23-800
090-5001-00T
041-5062-00
Mtr.
20v DC Stepr.
041-5062-00
Relay
Bd.
20v DC
520-5010-00
Mtr.
20v DC Stepr.
041-5062-00
5v DC Meter 5v
091-5000-00
D iode O n T erminal S trip (if noted)
/RZ &XUUHQW &RLOV *URXS Drive Transistor (D.T.)
AUX 1: LEFT UP/DOWN POST
Q1
AUX 2: CENTER UP/DOWN POST
Q2
AUX 3: RIGHT UP/DOWN POST
Q3
6HFWLRQ&KDSWHU
3DJH
Driver
Ouput Board
Sol. Expander
(Aux. Board)
Sol. Expander
(Aux. Board)
Sol. Expander
(Aux. Board)
165-5000-89
165-5004-00
165-5004-00
Q32
I/O Pwr. Drvr. BLK-GRY
J6-P8
BRN
J7-P1
#32 CENTERFOLD OPEN/CLOSE
1RWH ,Q 7HVW )ODVK /DPSV 0HQX )ODVK ,FRQ )ODVKHUV WHVWHG DUH DOO )ODVK /DPSV ORFDWHG EHWZHHQ 44 7KLV *DPH 44
$X[LOOLDU\ 8. 21/<
Bulb Type
#89 Bulb
#89 Bulb
165-5000-89
041-5075-04
D.T. Control
Line Color
D.T. Control
Line Connect
Power
Line Color
Power Line
Connnection
Power
Voltage
WHT
CN2-P5
BRN
J7-P1
20v DC
RED
CN2-P4
BRN
J7-P1
20v DC
090-5030-00T
ORG
CN2-P3
BRN
J7-P1
20v DC
090-5044-00T
Coil GA-Turn
26-1200
090-5044-00T
23-1100
26-1200
*R7R
'LDJQRVWLFV0HQX
Backbox I/O Power Driver Board Detailed Wiring Diagram
(20v DC Low Power)
BRN
6
(Reverse)
BLK-GRY
AUX
3
Q32
1 GND
Solenoid Expander
PC (Auxilliary) Board
(SPI: 520-5192-00)
Q17
For Replacement Cable Wiring Harness from CN1 (Sol. Exp. Bd.) to
J3 (I/O Bd.) use SPI Part Number: 036-5479-00-76
Q18
FROM
7
8
16v AC
J7
J17P6
I/O BD.
BRIDGE 2
20V LOW
CURRENT
COILS
Q19
Q20
Q21
GND
FROM
BRDG 2
RED-WHT
Q22
Transformer
16v AC
5A
Slo-Blo
J17P7
I/O BD.
Q23
F7
Q24
FROM
BLU-WHT
Transformer
13v AC
Q1
Q3
J13P10
I/O BD.
BRDG 20
BLU-WHT
J8
Transformer
FROM
13v AC
BLU
8A
Slo-Blo
J17P9
I/O BD.
LAMP COLUMNS
+18v DC
Q4
Q5
F22
Q6
Q1-Q16
STP20N10L
110-0106-00
Note: All Coils require diodes.
Some diodes may be located on
Terminal Strips & not on the coil itself.
For the Playfield Terminal Strips,
Fuses & Misc. Wiring Descriptions &
Locations, see Section 5, Chapter 2,
Playfield Wiring.
BRIDGE 1
50V HIGH
CURRENT
COILS
F6
FROM
BLK-YEL
48v AC
GND
Q9
For the General
Illumination (G.I.)
Circuit Detailed
Wiring Diagram,
see Sec. 5, Chp. 2,
Playfield Wiring.
Q10
Q11
J9
7A
Slo-Blo
AC Voltages IN
Q8
Q17-Q32
TIP122
110-0067-00
D iode
On
T erminal
S trip
J11P3
I/O BD.
Q7
Q12
Q13
3A
Slo-Blo
Q14
BRDG 1
F21
3A
Slo-Blo
J11P2
I/O BD.
FROM
BLK-ORG
AC Voltages IN
48v AC
F20
Q15
Q16
FOR
MAGNET(S)
IF USED
Go To
Diagnostics Menu
J10
Bulb X1
BLK-VIO
#31 Centerfold
On/Off
BLK-GRY
#32 Centerfold
Open/Close
J7 1
BRN 20V DC LOW POWER .
3
4
6
7
8
9
10
J8 1
4
5
6
7
8
9
J9 1
2
4
5
6
7
8
9
J10 1, 2
3
4, 5
(SPI: 041-5075-04)
S
Centerfold
Motor
DC Bi-Directional
Relay Board
(SPI: 520-5066-00)
FROM
VIO-BRN
VIO-RED
23-800
23-800
Power Out
+12v DC
J16P3
I/O BD.
#17 Left
Slingshot
D
O
T
S
#18 Right
Slingshot
D
O
T
S
D
O
T
S
Diodes (1N4004) are
D iode
located on Terminal Strips
On
the playfield.
T erminal below
See Section 5,
S trip
Chapter 2, Playfield wiring
D
O
T
S
for location and details.
RED VIO-ORG
#19 Drop Screen
Stepper #1
GRN VIO-YEL
#20 Drop Screen
Stepper #2
RED
Stepper
Motor
(SPI: 041-5062-00)
BLK VIO-GRN
#21 Drop Screen
Stepper #3
VIO-BLU
#22 Triangle
Billboard
BLU VIO-BLK
#23 Drop Screen
Stepper #4
If used, located in Cabinet.
(VIO-GRY)
BRN-BLK
002002
COIN METER
26-1200
BRN-RED
23-700
BRN-ORG
27-1500
BRN-YEL
26-1200
BRN-GRN
27-1500
BRN-BLU
26-1200
BRN-VIO
26-1200
BRN-GRY
BLU-BRN
26-1200
26-1200
BLU-RED
26-1200
BLU-ORG
26-1200
BLU-YEL
26-1200
BLU-GRN
26-1200
BLU-BLK
24-940
ORG-GRY
23-1100
ORG-VIO
23-1100
Haydon
Nº 36864-12
BLK
GRN
WHT
BLU
FROM
#24 Optional
Coin Meter
YEL-BLK
J16P8
I/O BD.
#1 Trough
Up-Kicker
Voltage Outputs
FROM
RED
#2 Auto Launch
3
COMM.
1
GRY-RED
ORG 20V DC LOW POWER .
2
BLU
Power Out
+5v DC
#3 Ball Lock
Post
#4 Left Orbit
Post
#5 Drop Target
(1-Bank)
#6 Center Lane
Post
#7 Bead Screen
Left
#8 Bead Screen
Right
#9 Left
Bumper
#10 Right
Bumper
#11 Bottom
Bumper
#12 Grotto
Eject
24v DC
J10P10
I/O BD.
:
GND
FROM
BLK-BLU
N.C.
4
PI
Q2
#30 Flash: Triple
Jackpot X1
(S
BRIDGE 20
CONTROLLED
LAMPS
#906
#89
Bulb X1
N.O.
3
le 0)
ng r -0
ia to 030
Tr Mo41-5
0
J17P8
I/O BD.
BLK-GRN
10
WHT-RED
Transformer
#29 Flash: Rt
Slingshot X1
COMM.
5
Relay Board
(SPI: 520-5010-00)
COMM WHT
N.C.
N.U.
N.O.
J11P2
I/O BD.
FROM
FROM
BRN
BLK-ORG
+20v DC
J7P1
I/O BD.
24v AC
Voltage Outputs
AC Voltages
#13
VUK
YEL-VIO 50V DC
#14 Magazine
Post
#15 Left
Flipper
#16 Right
Flipper
Sec. 3: ... Diagnostics
Q31
#89
#906
Bulbs X1
N.C.
3
S
26-1200
AUX
2
6
BLK-YEL
BLU-WHT
RED
3 ORG
Right
Up/Down Q3
Post
Q30
#28 Flash: Lt
Slingshot X1
WHT
Post
AUX
1
5
#89
#906
BLK-ORG Bulbs X2
BRN
VIO-BLU (FROM J7-P8)
J2
23-1100
Q29
4
#27 Flash: Back
Lt X1 Back Rt X1
N.O.
4
24v DC 10A DPDT
J6
Q28
#89
#906
Bulbs X4
BLK-VIO
BLK
For UK USE ONLY
See Sec. 5, Chp. 4, (UK Only) Solenoid Expander PC Board,
Schematic,Component Layout & Parts, for more details.
#26 Flash:
Mirror X4
GRN
3
#89
#906
7
(On/Off)
BLU
Q27
(Skill Shots: Left & Right Up/Down Posts, and Center Up/Down Post)
26-1200
BLK-RED
Q26
J2 & J3 Optional use of a Printer Interface,
see Sec. 5, Chp. 3, Cabinet / Coin Door Wiring Diagram
FROM
10
J7BRN
9
P1
Low Power
8
I/O
BD.
+20v DC
7
CN1
CN2
6
5
Left
5 WHT
3 ORG-BLK 4 Up/Down Q1
Post
2 ORG-RED 2
1 ORG-BRN 1
Center
4 RED
Up/Down Q2
BLK-BRN
Q25
2
#25 Flash:
Triangle X1
BRN 20V DC LOW POWER .
J6 1
Partial View
I/O Power Driver Board
520-5137-01
#906
#89
Bulb X1
GRY-YEL
BLU-YEL
3A
Slo-Blo
3A
Slo-Blo
These coil Fuses are
located under playfield
NEAR assembly, see
Section 5, Chapter 2,
Playfield Wiring.
RED-YEL 50V DC HIGH POWER .
YEL-VIO 50V DC HIGH POWER .
Section 3, Chapter 2
Page 21
*R7R/D PS0HQX
To initiate, from the DIAGNOSTICS MENU, select the "LAMP" Icon with either the Red "LEFT" or Green
"RIGHT" Buttons and press the Black "ENTER" Button. Controlled lamps are configured in and 8 x 10
Matrix of Columns (Lamp Drives) and Rows (Lamp Returns) with up to 80 lamps possible. The Lamp
Test Menu consists of four (4) parts: Single Lamp Test, Test All Lamps, Row Lamp Test & Column Lamp Test.
D
6LQJOH/DPS7HVW
To initiate, from the LAMP MENU, select the "ONE" Icon with either the Red or Green Buttons and
press the Black Button. Select either the "-" or "+" Mini-Icons. Start with the "+" Mini-Icon to start the
manual Single Lamp Test from Column 1, Row 1, Lamp 1. Press the Black Button on the "+" Mini-Icon,
as each lamp is selected, the lamp will light at it’s location on the playfield as well as the display, indicating the
Lamp Matrix Grid Position, lamp name with the corresponding number, Return (Row) Wire & Color, Drive
(Column) Wire & Color, and associated drive transistors. Press the Black Button again to move forward in the
test. To test and view a particular lamp, select the "RUN" Mini-Icon and press the Black Button. Each time the
Black Button is pushed, the lamp will light-up on the playfield, with the display indicating the lamp information.
Continue with the same procedure to run through the entire test.
7HVW$OO/DPSV
To initiate, from the LAMP MENU, select the "ALL" Icon with either the Red or Green Buttons and press
the Black Button. If still in Single Lamp Test (or any 1 of the 4 tests), select the "PREV" Mini-Icon to
return to LAMP MENU or select either of the "<<" or ">>" Mini-Icons to move through the tests, keep
activating until Test All Lamps is displayed. The display will indicate ALL LAMPS ON and the lamps on the
playfield will be lit, alternating between the rows in the Lamp Matrix Grid.
5 RZ&ROX PQ/DPS7HVWV
6HF'LDJQRVWLFV
To initiate, from the LAMP MENU, select the "ROW" or "COL" Icon with either the Red or Green Buttons
and press the Black Button. If still in a previous test, select the "PREV" Mini-Icon to return to LAMP
MENU or select either of the "<<" or ">>" Mini-Icons to move through the tests, keep activating until Row
or Column Lamp Test (whichever desired) is displayed. In this test, each set of lamps in each Row or
Column of the Lamp Matrix Grid (respective to each test) will light-up on the playfield and is indicated in the
display.
/$030$75,;*5,'
D iode O n T erminal S trip :
Column
(18v)
Row
(GND)
8
127 86('
<(/%51
-3
4
127 86('
5('%51
-3
JANUARY
#555 Bulb
4
127 86('
5('%/.
-3
4
127 86('
5('25*
-3
4
127 86('
5('<(/
-3
4
127 86('
5('*51
-3
4
127 86('
5('%/8
-3
4
127 86('
5('9,2
-3
4
127 86('
5('*5<
-3
4
127 86('
5(':+7
-3
4
127 86('
5('
-3
8
127 86('
<(/5('
-3
FEBRUARY
#555 Bulb
APRIL
#555 Bulb
JULY
#555 Bulb
OCTOBER
#555 Bulb
BUNNY
#1 (BOTTOM)
#555 Bulb
MIDDLE
TOP LANE
#555 Bulb
NOT
USED
#555 Bulb
MAGAZINE
%$
3&4
#555 Bulb
NOT
USED
#555 Bulb
CTRFOLD SPOTLITE
(LT #2)
%$
#555 Bulb
6HFWLRQ&KDSWHU
3DJH
8
127 86('
<(/25*
-3
MARCH
#555 Bulb
MAY
#555 Bulb
JUNE
#555 Bulb
AUGUST
#555 Bulb
SEPTEMBER
#555 Bulb
NOVEMBER
#555 Bulb
BUNNY
#2
#555 Bulb
RIGHT
TOP LANE
#555 Bulb
SPLASH
(RT RAMP)
#555 Bulb
DOUBLE
JACKPOT
#555 Bulb
NOT
USED
#555 Bulb
STRIP POKER
(LT RAMP) %$
#555 Bulb
DECEMBER
#555 Bulb
BUNNY
#3
#555 Bulb
PHOTO SHOOT
(CENTER)
#555 Bulb
PHOTO SHOOT
(RT ORBIT)
#555 Bulb
8
127 86('
<(/%/.
-3
8
127 86('
<(/*51
-3
8
127 86('
<(/%/8
-3
MANSION
1 (LT)
#555 Bulb
LEFT
OUTLANE
#555 Bulb
PHOTO SHOOT
(LT ORBIT)
#555 Bulb
SURPRISE
PACKAGE
#555 Bulb
BUNNY
#4
#555 Bulb
EXTRA
BALL
#555 Bulb
BUNNY
(RT ORBIT)
#555 Bulb
NOT
USED
#555 Bulb
PEEK-A-BOO
3
#555 Bulb
MANSION
2
#555 Bulb
LEFT
RETURN LANE
#555 Bulb
BUNNY
(LT ORBIT)
#555 Bulb
MANSION
3
#555 Bulb
RIGHT
RETURN LANE
#555 Bulb
PHOTO SHOOT
(LT RAMP)
#555 Bulb
DROP
TARGET
#555 Bulb
BUNNY
#10
#555 Bulb
PAJAMA PARTY
HURRY-UP
#555 Bulb
JACKPOT
HURRY-UP
#555 Bulb
NOT
USED
#555 Bulb
JACKPOT
#555 Bulb
PEEK-A-BOO
1&2
#555 Bulb
COLLECT PLAY- CTRFOLD SPOTLITE
%$ (LT #1)
%$
MATES
#555 Bulb
#555 Bulb
TEASE
#555 Bulb
BUNNY
#5
#555 Bulb
GROTTO
ARROW
#555 Bulb
PHOTO SHOOT
(VUK)
#555 Bulb
NOT
USED
#555 Bulb
CTRFOLD SPOTLITE
PEEK-A-BOO
(RT #1)
%$
4
#555 Bulb
#555 Bulb
CTRFOLD SPOTLITE LEFT
(RT #3)
%$ BUMPER
%$
#555 Bulb
#555 Bulb
8
127 86('
<(/9,2
-3
MANSION
4 (RT)
#44 Bulb
RIGHT
OUTLANE
#555 Bulb
SPLASH
(LT RAMP)
#555 Bulb
8
127 86('
<(/*5<
-3
MULTIBALL
#555 Bulb
NOT
USED
#555 Bulb
MYSTERY
#555 Bulb
SPECIAL
#555 Bulb
NOT
USED
#555 Bulb
CTRFOLD SPOTLITE
(RT #2)
%$
#555 Bulb
RIGHT & BOTTOM
BUMPERS
#555 Bulb
%$
SHOOT
AGAIN
#555 Bulb
PEEK-A-BOO
#555 Bulb
JACKPOT
(LT RAMP)
#555 Bulb
PAJAMA PARTY
MULTIBALL
#555 Bulb
LEFT
TOP LANE
#555 Bulb
PHOTO SHOOT
(RT RAMP)
#555 Bulb
MAGAZINE
%$
1&2
#555 Bulb
NOT
USED
#555 Bulb
START
BUTTON
#555 Bulb
TOURNAMENT
BUTTON
#555 Bulb
*R7R
'LDJQRVWLFV0HQX
/DPS0DWUL[*ULG/RFDWLRQV
The lamp locations correspond with the
Lamp N in the Lamp Matrix Grid on the
previous page.
= Lamps mounted
above playfield.
#555 Bulb
(Wedge)
#44 Bulb
(Bayonet)
165-5002-00
165-5000-44
7\SLFDO /DPS 6FKHPDWLF
-XXX
7\SLFDO /DPS :LULQJ
YEL
RED
-XXX
The following Bulbs are used in the Lamp Matrix
Grid (See Table Grid on previous page for details):
= Lamps mounted
below playfield.
COMMON
Diode 1N4001
Note:
All Switch, Lamp & Coil assemblies require diodes. Some diodes are located
under the playfield on Terminal Strips or Diode Boards and not on the assemblies.
D iode O n T erminal S trip or D iode O n D iode B oard
*R7R
'LDJQRVWLFV0HQX
6HFWLRQ&KDSWHU
3DJH
6HF'LDJQRVWLFV
Legend Note:
7HVW)OD VK/DPSV
D
To initiate, from the DIAGNOSTICS MENU, select the "FLASH"
Icon with either the Red "LEFT" or Green "RIGHT" Buttons
and press the Black "ENTER" Button. After selecting this Icon
the display will indicate CYCLING FLASHERS. The Flash Lamps will
38// 287 WKH 3RZHU ,QWHUORFN 6ZLWFK
cycle continuously until the test is exited. This test allows the technician IRU RSHUDWLRQ ZLWK WKH &RLQ 'RRU RSHQ
to easily spot any burned-out bulbs and replace them. Flashers tested
are Flash Lamps in Positions: Q1-Q32 and in this game Flash Lamp(s) are in Position(s): Q25-Q29.
&OHD U%D OO 7URX JK
To initiate, from the DIAGNOSTICS MENU, select the "CLR"
Icon with either the Red "LEFT" or Green "RIGHT" Buttons
and press the Black "ENTER" Button. This Menu is provided
to allow the technician a simple method of removing the balls from the
38// 287 WKH 3RZHU ,QWHUORFN 6ZLWFK
trough and also, to test functionality of the trough, ensuring proper trough IRU RSHUDWLRQ ZLWK WKH &RLQ 'RRU RSHQ
operation. After selecting this Icon the display will show a graphic of the
ball trough with balls in the trough with it’s corresponding switch number. Select the "RUN" Mini-Icon to eject the
ball in the first position. Simultaneously, the display and the playfield will eject the ball to the Trough Up-Kicker,
eject from the Trough Up-Kicker into the Shooter Lane and will be ejected onto the playfield where the technician
can easily retrieve the pinball or allow the ball(s) to re-enter the trough to continue Clear Ball Trough Test.
CAUTION: Continuous use of above test may overheat the Trough Up-Kicker Coil.
7HFK QL FL DQ$O HUW V
6HF'LDJQRVWLFV
To initiate, from the DIAGNOSTICS MENU, select the "TECH"
Icon with either the Red "LEFT" or Green "RIGHT" Buttons
and press the Black "ENTER" Button. This Menu is provided
to show any switch problems and/or missing pinballs. After selecting this
Icon, the display will indicate any or all of the following categories:
POSSIBLY BROKEN SWITCH, CHECK SWITCHES or HYPERSENSITIVE SWITCH (Sw. #16, Shooter Lane, is used as an example).
If more than one switch is reported, the Switch Number and Name will
cycle within the category, and then will cycle the categories. To return to
the DIAGNOSTICS MENU, select & activate the "PREV" Mini-Icon.
6ZLWFK'HWHFWLRQ
During game play, activation of switches and operation of coils with
associated switches are monitored. In programming, every switch is given a minimum & maximum value based on
the game. The switches are monitored every 5 minutes of game play with a "sliding window" of 15 minutes. If a
switch is determined to be faulty, game play is compensated. Switches noted as POSSIBLY BROKEN SWITCH
should be checked, then adjusted or replaced. Important: A switch reported as "possibly broken" may actually
be an unused switch due to lack of usage and not because they’re broken. This can happen, if a switch is
located in a "hard" shot position, and the players are not making the shot. Game programming will still
compensate for this unplayed switch. Switches noted as CHECK SWITCHES are determined to be stuck closed
or open depending on switch usage. Free up the switch actuator; adjust or replace if necessary. Switches noted
as HYPERSENSTIVE SWITCH means just that, the switch should be readjusted or replace if necessary.
Determination of switch usage can be check in Audits (review Section 3, Chapter 3, GO TO AUDITS MENU).
Find the associated Audit with the switch in question and check usage; compare it to commonly used switches for
comparision. After any switch is checked and repaired or replaced, it’s suggested to test the switch in the PLAY
TEST MENU (see the next page) or Single Coil Test (reviewed earlier in this chapter, Page 18) where the
associated coil to the switch can be tested as well. After correcting the problem, the switch will still be reported
until the game is played and the switch is again monitored as specified above. Only you can determine if a switch
getting reported is bad or if the switch is currently not getting actuated during game play.
Coils are not reported in Technician Alerts, however, if a faulty switch
is the culprate, the switch will then be reported. This display is shown
momentarily during Game Mode or Power-Up to alert the operator of a
coil malfunction (coil doesn’t energize or coil fires a multiple number of
times). OPERATOR ALERT! works by monitoring any switch activated
coil that has the potential to trap a ball when disabled (e.g. in the Auto Launch, Scoop, Eject, etc.). This alert can
also appear if a switch associated with a coil (e.g. #16 Shooter Lane & #2 Auto Launch) is stuck closed (caused by
a switch jam or stuck ball); the CPU/Sound Board will activate the coil
approximately ten times and if the switch remains closed, the game will
report this switch in Technician Alerts as CHECK SWITCHES. The
display alert PLEASE CHECK TECH REPORT will be shown.
Technicians Alerts continued on the next page.
6HFWLRQ&KDSWHU
3DJH
*R7R
'LDJQRVWLFV0HQX
7HFK QL FL DQ$O HUW V&RQWL QX HG
While in Technician Alerts Menu, if the following is displayed,
the game has detected 1 or more pinball(s) missing and has
compensated for the lost pinball(s) to provide normal game play
Continued
Important: Determine where the pinball is! Do not add pinball(s) until it is determined the pinball(s) are indeed
missing and not just stuck. If pinball(s) are added, and if the original stuck pinball has freed itself, the pinball game
will not operate properly with the extra pinball(s). When the pinball is recoved, the above display will not appear
the next time Technician Alerts is visited (a game must be played for the pinball to be determined as found).
3LQEDOO'HWHFWLRQ
During game play, a ball can get trapped or stuck. If after approximately 15 seconds of inactivity or "no scoring,"
Ball Search is started. Note: If the pinball is in the Plunger Lane or "held" on the flipper, no Ball Search will be
performed. The game will perform one Ball Search in an attempt to "find" or free-up the pinball. If the game does
not see a switch closure (indicating the pinball has not been found), the following display will appear with a
count-down timer of 20 seconds, during which Ball Search will continue
until the timer runs out (this feature will not happen if the game is in
Competition Mode; Ball Search will continue until the pinball is found,
unstuck and/or replaced manually). The display will momentarily
aknowledge the missing pinball(s). The game will provide another pinball
into play and will compensate for the lost pinball. Game play will appear normal. Note: This detection and
compensation will happen with every pinball, if each suffers the same fate of a ball trap. If all balls get trapped,
the game cannot be played or started until the situation is rectified.
6HU YLFH3KRQH
To initiate, from the DIAGNOSTICS MENU, select the "SERV" Icon with either the Red "LEFT" or Green
"RIGHT" Buttons and press the Black "ENTER" Button. After selecting this Icon the display will
indicate a phone number to call if technical assistance is required (In USA Code: 1-800-KICKERS).
%HJLQ3OD\7HVW
To initiate, from the DIAGNOSTICS MENU, select the "PLAY"
Icon with either the Red "LEFT" or Green "RIGHT" Buttons
and press the Black "ENTER" Button. After selecting this Icon
the technician can test certain play functions to insure all switch activated 38// 287 WKH 3RZHU ,QWHUORFN 6ZLWFK
coils function without entering game play. For example, by rolling the ball IRU RSHUDWLRQ ZLWK WKH &RLQ 'RRU RSHQ
over the Shooter Lane switch, the Autoplunger should fire. If it kicks to
early or too late, the switch actuator should be adjusted to compensate for this error. If it fails to fire, use the
Switch Test or Coil Test to help determine the cause of the failure. During this function, similar tests may be
performed on the "Ejects", Slingshots, Vertical Up-Kickers, Pop Bumpers, etc. in the game. For unique Play Test
functions, select the ’GAME NAME’ TEST(S) Icon in the DIAGNOSTICS MENU.
)LUH.QRFNHU
To initiate, from the DIAGNOSTICS MENU, select the "KNOCKER" Icon with either the Red "LEFT" or
Green "RIGHT" Buttons and press the Black "ENTER" Button. The digitally mastered "Knocker" is
sounded.
6RX QG6SHDNHU7HVW
To initiate, from the DIAGNOSTICS MENU, select the "SPKR" Icon with either the Red "LEFT" or Green
"RIGHT" Buttons and press the Black "ENTER" Button. The BSMT 2000 Sound System produces
true digital stereo sound from Backbox & Cabinet Speakers or "Mono" on the Cabinet Speaker (when
used by itself). After selecting this Icon, select the "-" or "+" Mini-Icons and press the Black "ENTER" Button to
activate the first test. Repeat to visually see & hear all tests. Select the "RUN" Mini-Icon to activate the test
chosen without moving to the next test.
Note: During Sound Tests, the display shows the speaker identification and the corresponding sound(s). The
sound functions allow verification that both channels are functioning properly & that the speaker connections are
correct.
Sound / Speaker Test continued on the next page.
*R7R
'LDJQRVWLFV0HQX
6HFWLRQ&KDSWHU
3DJH
6HF'LDJQRVWLFV
Until any missing pinball is returned to play, the game upon Power-up,
opening the Coin Door or exiting Portals• , will cotinue to momentarily
display the following (along with an audible sound):
6RXQG6SHDNHU7HVW&RQWLQX HG
6SHDNHU3KDVH7HVWLQJ
Connections to each of speakers are polarized and each must be connected appropriately for the best
quality sound. If one speaker has the positive and negative connections reversed with respect to the
other one, bass frequencies will not be produced properly and the overall sound quality will be poor. To test for
proper speaker phasing, use the sound test to cycle through the Backbox & Cabinet, and Backbox Sine (repeated)
functions. If the Cabinet Sine produces more volume and bass than the Left Sine, the speakers are connected
properly. If it produces the same or less, one speaker is connected improperly. To isolate and correct reversed
speaker connections, one of two methods may be used.
Continued
D
1. Check each speaker for polarity markings. If the speakers have polarity markings, verify that the Backbox
Speaker RED-WHT Wire and the Cabinet Speaker YEL-WHT Wire is connected to the negative (-) terminal.
2. Disconnect the speaker output connector from the CPU / Sound Board and connect a 1.5-volt battery across
each speaker pair one at a time while observing the speakers. Make sure the positive battery terminal is
connected to the positive lead (CN4, Pin-3 (RED-BLK) or Pin-6 (YEL-BLK)) each time. As the connection is
made, check speaker cone movement; proper connections are indicated by outward movement.
$XWR 0DQXDO 7HVWV
6RXQGV 3URGXFHG
Speaker Test
Tone
Sound/OPSYS EPROM (Loc. U7)
Level 1-3+ (Music Test)
Voice ROMs: 1 (U17) 2 (U21) 3 (U36) 4 (U37)
Speech Pattern 1-3+
Note: For ROM Locations, see Page # X. For ROM Usage (Summary Table) see Page # Z in the
"Find-It-In-Front: Dr. Pinball Section". Voice ROMs (U17, U21, U36 & U37) which are 8MB must have a
Jumper at W6 on the CPU/Sound Board to function properly.
6HF'LDJQRVWLFV
%HJLQ%X UQ,Q
To initiate, from the DIAGNOSTICS MENU, select the "BURN" Icon with either the Red "LEFT" or Green
"RIGHT" Buttons and press the Black "ENTER" Button. After selecting this Icon the Begin Burn-In
Test will start. At this stage the game will exercise all CPU I/O Functions (Dot Matrix Display Test, Coil
Testing, Lamp Testing, Sound..., etc.). This is provided to constantly exercise sounds, coils, etc... Cumulative
Burn-In minutes will be displayed. Note: To reset Burn-In minutes to 00 see Section 3, Chapter 6, GO TO RESET
MENU, Factory Reset. Caution: Performing a Factory Reset will reset all other information as well.
' R W 0 DW UL [7H V W
To initiate, from the DIAGNOSTICS MENU, select the "DOT TEST" Icon with either the Red "LEFT" or
Green "RIGHT" Buttons and press the Black "ENTER" Button. After selecting this Icon the Dot Matrix
Test immediately begins. The display will immediately illuminate & cycle for 1 pass of each test
continuously for each of the following tests:
1. Illuminates 1 vertical column of dots, turning it off & illuminating the next column,
until each column has been individually lit, while the other columns are off.
2. Illuminates 1 horizontal row of dots, turning it off & illuminating the next row,
until each row has been individually lit, while the other rows are off.
3. Illuminates all the dots, except for one column from left to right.
4. Illuminates all the dots, except for one row from top to bottom.
5. Illuminates every other dot lit, in both the rows and columns.
Note: Pressing any button will exit the test & return to DIAGNOSTICS MENU.
'RW0DWUL['LVSOD\([SODLQHG
The display utilizes a Micro-Processor Control Board mounted in piggyback fashion to the Dot Matrix Display
(128 X 32) Driver Board. The purpose behind this board is to provide more information to the operator as well as
displaying graphics to the player.
The board is controlled by a 6809E Microprocessor and its personality ROM (Unique to the Game). It receives
Data, Reset & Clock Information from the CPU/Sound Board via the ribbon cable and sends back multiple Status
and Busy Signals to the CPU. This is to insure synchronized communication between the CPU and the Display
Controller Board. The Drivers for the rows and columns are provided on 5 surface mounted integrated circuits on
the Dot Matrix Display Driver Board.
6HFWLRQ&KDSWHU
3DJH
*R7R
'LDJQRVWLFV0HQX
*R7R3O D\ ER\ 7HVW V
To initiate, from the DIAGNOSTICS MENU, select the "PB" Icon
with either the Red "LEFT" or Green "RIGHT" Buttons and
press the Black "ENTER" Button. After selecting the "PB"
Icon, the PLAYBOY TESTS
38// 287 WKH 3RZHU ,QWHUORFN 6ZLWFK
MENU appears, with the "CF" IRU RSHUDWLRQ ZLWK WKH &RLQ 'RRU RSHQ
Icon flashing. This Sub-Menu
is used to test the operation of the Centerfold Motor & Switches
("CF" Icon), Triangle Motor & Switches ("TRI" Icon) and Stepper
Motor & Switch ("STEP" Icon) (Detailed on the next page). To initiate,
Display indicates Mech. is "Closed":
from the MONOPOLY TESTS MENU, select one of the 3 Icons with
either the Red or Green Buttons and press the Black Button. After
finishing the selected Test, select the "PREV" Mini-Icon to return to
PLAYBOY TESTS MENU or select either of the "<<" or ">>" Mini-Icons
to slip between the 3 Testing Sub-Menus.
CAUTION: Please be aware of any MOVING PARTS!
... indicates Mech. is "Inbetween Limits":
Note: Upon Power-Up (quiting Portals• initiates the "Power-Up
Mode"), the all mechanisms will return to it’s home position as shown.
Display indicates Mech. is "Open":
Selecting the"CF" Icon will bring up the CENTERFOLD MOTOR TEST
MENU. This test is provided to allow a method of testing the
Centerfold Motor (Open/Close) (Q32) in conjunction with the Motor
Relay Board (On/Off) (Q31) and the Centerfold (Motor) Switches
(Sw. 43 & Sw. 44). Upon entering the test, the display will indicate the
status of the Relay Board (either STOPPED or OPENING) and
indicated the status of either Switch (the "RUN" Mini-Icon will be
flashing). Select either the "RUN" or "PULSE" Mini-Icons. Activating
the "RUN" Mini-Icon will cycle the motor until the Centerfold Assembly
is completely OPEN or CLOSED. Activating the "PULSE" Mini-Icon
will pulse the motor. Watch the display, as the Centerfold OPENS or
CLOSES, the switches will close (the
box will turn solid ).
F
Selecting the"TRI" Icon will
bring up the TRIANGLE MOTOR TEST MENU. This test
is provided to allow a method
of testing the Triangle Billboard Motor (Rotating) via
the Motor Relay Bd. (Q22) &
the Triangle Mech Switches
(Sw. 29 & Sw. 30). Upon
entering the test, the display
will indicate the status of
either/both Switches (the
"RUN" Mini-Icon will be flashing). Select the "RUN" MiniIcon. Activating the "RUN"
Mini-Icon will cycle the motor
to the next switch closure
state (either to the Left or
Right). Watch the display, as
the Triangle Billboard Assy.
ROTATES LEFT or RIGHT,
the Triangle Mech #1 Switch
(Sw. 29) and/or #2 Switch
(Sw. 30) will close (the
box
will turn solid ).
J
F
J
... "Triple Jackpot" faces Front.
... Inbetween Positions.
... "Rabbit Head" faces Front.
... "Splash" faces Front.
Note: During Normal
Operation, when the CPU
registers the desired state change on the switches, it will turn-off the
motor. There will be "overtravel" so the switches in Diagnostics will not
show the proper state, though the unit is in the correct position.
Go To Playboy Tests continued on the next page.
*R7R
'LDJQRVWLFV0HQX
6HFWLRQ&KDSWHU
3DJH
6HF'LDJQRVWLFV
&HQWHU IROG0RWRU7HV W
*R7R3O D\ ER\ 7HVW V&RQWL QX HG
CAUTION: Please be aware of MOVING PARTS!
Continued
6WHSSHU0RWRU7HVW
38// 287 WKH 3RZHU ,QWHUORFN 6ZLWFK
IRU RSHUDWLRQ ZLWK WKH &RLQ 'RRU RSHQ
D
Selecting the"STEP" Icon will bring up the STEPPER MOTOR TEST
MENU. This test is provided to allow a method of testing the Drop
Screen (Tease) Stepper Motor (Drop Screen Stepper #1: Q19, Drop
Screen Stepper #2: Q20, Drop Screen Stepper #3: Q21 & Drop
Screen Stepper #4: Q23) and the Tease Screw Limit Switch (Sw.
52). Upon entering the test, the display will indicate the status of the
Switch (the "RUN" Mini-Icon will be flashing). Select either the "RUN"
or "PULSE" Mini-Icons. Activating the "RUN" Mini-Icon will cycle the
motor until the Drop Screen (Tease) Assembly is completely DOWN or
UP. Activating the "PULSE" Mini-Icon will pulse the motor. Watch the
display, as the Drop Screen (Tease) Assembly moves DOWN, the
Tease Screw Limit Switch (Sw. 52) will open (the
box will turn ).
J
F
Note: Upon Power-Up (quiting Portals• initiates the "Power-Up
Mode"), the mechanism will return to it’s home position as shown.
6HF'LDJQRVWLFV
Above: Front view - Tease Screen closed.
Above: Front view - Tease Screen opening.
Above: Under playfield view - Tease Screen closed.
Above: Under playfield view - Tease Screen opened.
Left: Rear
view - Switch
52 shown in
the closed
position.
6HFWLRQ&KDSWHU
3DJH
Right: Rear
view - Switch
52 shown in
the open
position.
*R7R
'LDJQRVWLFV0HQX
*R7R)XVH7DEOH
To initiate, from the DIAGNOSTICS MENU, select the "FUSES" Icon with either the Red "LEFT" or
Green "RIGHT" Buttons and press the Black "ENTER" Button. The FUSE TABLE MENU now
appears. This provides the techician with the current Fuse Table for this game (also noted on decal in the
Backbox).The fuses are located in the Backbox (on the Display Power Supply Board and the I/O Power Driver
Board), and also in the Cabinet (under the playfield by the Flippers and/or by any unique assembly requiring an
additional fuse, such as magnets). For the complete Fuse List in the Quick Reference Fuse Chart & Pictorials,
see the next page or Page # (front of this manual).
:
([ DPSOH
Press the Black "ENTER" Button to activate this ICON. The DIAGNOSTICS MENU now appears with the
"SW" Icon (GO TO SWITCH MENU) flashing; use the Red "LEFT" or Green "RIGHT" Buttons, until the
"FUSES" Icon (GO TO FUSE TABLE) is flashing:
Press the Black Button to activate this ICON. The FUSE TABLE now appears.
Select and activate the "+" Mini-Icon to view the next fuse in the group. Continue to select either the "+" or "-"
Mini-Icons to view each fuse one at a time. The display will describe the fuse identification number (e.g. Main, F1,
F6, F7, etc.), rating of fuse (e.g. 5A 250v S.B. - i.e. 5 Amp, 250 volt, Slo-Blo), location of fuse (i.e. Backbox: Board
Name located on; or Cabinet: Under the playfield or in Service Outlet), and ‘use of fuse’ (e.g. 90v DC High Voltage
Power, etc.). The current fuse listed will remain in the display until the next fuse is chosen or when the Sub-Menu
is exited by selecting & activating the "PREV" or "QUIT" Mini-Icons.
Go To Fuse Table continued on the next page.
*R7R
'LDJQRVWLFV0HQX
6HFWLRQ&KDSWHU
3DJH
6HF'LDJQRVWLFV
After entering Portals , the MAIN MENU now appears with the "DIAG" Icon (GO TO DIAGNOSTICS MENU)
flashing:
9%$&.%2;/$<287/2&$7,216)XVHV%ULGJHV5HOD\V520V9
'LVSOD\3RZHU6XSSO\%RDUG
D
6HF'LDJQRVWLFV
QUICK REFERENCE FUSE CHART
B a c k b o x F u s e s
LOC:
DISPLAY POWER SUPPLY (P.S.) BOARD
F1 3e4A 250v S.B. 90v DC High Voltage Display
LOC:
I / O POWER DRIVER BOARD
F6 7A 250v S.B. 50v DC Primary High Power Coils/Flippers
F7 5A 250v S.B. 20v DC Low Power Coils
F8 5A 250v S.B. 12v DC Logic Power
F9 5A 250v S.B. 12v DC Logic Power
F20 3A 250v S.B. 50v DC Magnet
F21 3A 250v S.B. 50v DC Coils
F22 8A 250v S.B. 18v DC Controlled Lamps
F23 4A 250v S.B. 5v DC Logic
F24 5A 250v S.B. 6.3v AC G.I. Lamps (BRN-WHT to WHT-BRN)
F25 5A 250v S.B. 6.3v AC G.I. Lamps (YEL to WHT-YEL)
F26 5A 250v S.B. 6.3v AC G.I. Lamps (GRN to WHT-GRN)
F27 5A 250v S.B. 6.3v AC G.I. Lamps (VIO to WHT-VIO)
F28 3A 250v S.B. 24v AC Not Used / Spare
C a b i n e t F u s e s
LOC:
SERVICE (AC) OUTLET BOX (Cabine t Bottom)
n/a 8A 250v S.B. 115v AC Main Fuse Line (Domestic or USA)
n/a 5A 250v S.B. 220v AC Main Fuse Line (International)
P l a y f i e l d F u s e s
LOC:
UNDER PLAYFIELD (nea r Flippers )
n/a 3A 250v S.B. 50v DC Rt. Flipper (BLU-YEL RED-YEL)
n/a 3A 250v S.B. 50v DC Lt. Flipper (GRY-YEL RED-YEL)
n/a 3A 250v S.B. 50v DC Upr. Flipper (GRY-YEL RED-YEL)
For locations & more information on fuses, see Sec. 5, Chp. 2.
)RU %DFNER[ &DELQHW *HQHUDO 3DUWV UHYLHZ 6HFWLRQ &KDSWHU 3DUWV ,GHQWLILFDWLRQ /RFDWLRQ 7KH 3LQN 3DJHV
)RU 6FKHPDWLFV DQGRU &RPSRQHQW 3DUWV RQ 3& %RDUGV VKRZQ UHYLHZ
6HFWLRQ &KDSWHU 3ULQWHG &LUFXLW %RDUGV 7KH <HOORZ 3DJHV
F1
&386RXQG%RDUG
SW300
U21 U17
U212
CMOS
RAM
VOICE ROMS
,23RZHU'ULYHU%RDUG
F24 F26
F9 F22 F23
F25F27
G.I.
Relay
F8 F7
B3
B20 BRIDGES B2
&38 6RXQG
%RDUG
,2 3RZHU
'ULYHU
%RDUG
U36
U37
'LVSOD\ &RQWUROOHU %RDUG
‡
U210
CPU/
OPSYS
EPROM
1R)XVHV
Jumper @
W6 must
be present
for 8MB
EPROMs
0RXQWHG EHKLQG WKH 'RW 0DWUL[ 'LVSOD\
6ROHQRLG
([SDQGHU
%RDUG
3x AA
SOUND/
U7 OPSYS
EPROM
B21
*** All BRIDGES rated
35A @ 100v ***
+50v DC High
B1
Current Coils
B2
+20v DC Low
Current Coils
B3
+/-12v DC
Sound /
Display / Logic
B20
B21
F6 F21
ROM
0
B1
F28 F20
1R)XVHV
Playfield Power
Interlock Switch
Inside Coin Door
Volume Control & Service Switches
For operational usage,
see Section 3, Chapter 1,
Portals Service Menu Introduction.
The Display Controller Board
(holds the Display ROM Loc: ROM0)
is positioned behind the 128 X 32
Dot Matrix Display Board.
(Neither board contain Fuses.)
Memory Protect
Switch
Service Outlet
(on Power Box)
Inside Coin Door
On/Off Switch
(Under Pwr. Box)
Playfield Power
Interlock Switch
Memory Protect
Switch
6HFWLRQ&KDSWHU
3DJH
+18v DC
Illumination
+5v DC Logic
Voltage
Int’l.: 5 Amp 250v
Slo-Blo Fuse
INSIDE
INSIDE VIEW
VIEW OF
OF
THE PINBALL
PINBALL CABINET
THE
CABINET
USA: 8 Amp 250v
Slo-Blo Fuse
Transformer on
Cabinet Bottom
*R7R
'LDJQRVWLFV0HQX
'U3LQE DOO
To initiate, from the DIAGNOSTICS MENU, select the Cross "DR." Icon with either the Red "LEFT" or
Green "RIGHT" Buttons and press the Black "ENTER" Button. This will bring you (the operator /
technician) into DR. PINBALL (Flow Chart Menus) which offers you a choice of three (3) Icons:
Coil "DR.", Switch "DR." and Lamp "DR." Icons. Selecting a particular Icon will give you a choice of which specific
Coil (any and all coil assemblies such as Flippers, VUKs, Magnets, etc.), Switch or Lamp circuit needs to be
diagnosed. Dr. Pinball will now display a question or give a procedure to follow such as "Does the lamp turn
on?" or "Check bridge rectifier BR-20, if short replace." When Dr. Pinball displays a question or requests a
procedure, Dr. Pinball will expect a response such as "NO" or "YES" (see below examples of the Mini-Icons which
will prompt the operator). You the operator/technician must respond by using the Red or Green Buttons to
"SELECT" a Mini-Icon and the Black Button to "ACTIVATE or ENTER" your selection.
&RLO)ORZ&KDUW
To initiate, from the DR. PINBALL MENU, select the Coil "DR." Icon with either the Red or Green
Buttons and press the Black Button. This is the Coil Flow Chart. Follow the questions, answering by
using the Mini-Icons in the display.
6ZLWFK)ORZ&K DUW
To initiate, from the DR. PINBALL MENU, select the Switch "DR." Icon with either the Red or Green
Buttons and press the Black Button. This is the Switch Flow Chart. Follow the questions, answering
by using the Mini-Icons in the display.
To initiate, from the DR. PINBALL MENU, select the Lamp "DR." Icon with either the Red or Green
Buttons and press the Black Button. This is the Lamp Flow Chart. Follow the questions, answering by
using the Mini-Icons in the display.
The following are the Mini-Icons with explanations for the DR. PINBALL Sub-Menus:
Select and activate either the "-" or "+" Mini-Icons to diagnose a Coil, Lamp or Switch. Select and activate the
"RUN" Mini-Icon to test selected item. The "PREV" Mini-Icon allows you to go back to previous question. Select
the "QUIT" Mini-Icon to exit Portals completely. Select the "?" Mini-Icon (Help) to see directions on button usage.
Select and activate either the "NO or "YES" Mini-Icons to answer a question given. Select and activate the "END"
Mini-Icon to change to a new item to test. The "PREV" Mini-Icon allows you to go back to previous question.
Select the "QUIT" Mini-Icon to exit Portals completely. Select the "?" Mini-Icon (Help) to see directions on button
usage.
After a diagnosis is given, select and activate the "END" Mini-Icon to change to a new item to test. The "PREV"
Mini-Icon allows you to go back to previous display. Select the "QUIT" Mini-Icon to exit Portals completely.
Select the "?" Mini-Icon (Help) to see directions on button usage.
In COIL FLOW CHART MENU, select and activate the "PULSE" Mini-Icon to pulse the coil selected. Select and
activate the "END" Mini-Icon to change to a new item to test. The "PREV" Mini-Icon allows you to go back to
previous question. Select the "QUIT" Mini-Icon to exit Portals completely. Select the "?" Mini-Icon (Help) to see
directions on button usage.
*R7R
'LDJQRVWLFV0HQX
6HFWLRQ&KDSWHU
3DJH
6HF'LDJQRVWLFV
/DPS)ORZ&K DUW
&RS\ WKLV SDJH IRU )LHOG $XGLW 7UDFNLQJ 3HUIRUPDQFH
$8', 7 7$ %/(
..
GAME
LOCATION
NAME :
STARTING METER Reading :
STARTING METER Date (MM/DD/YR) :
VOLUME
SETTING:
AUDITOR’S NAME :
...... ......
.........
CURRENT METER Reading :
AUDIT Date (MM/DD/YR) :
CPU Version :
DISPLAY Version :
...... ......
........
TOTAL PAID CREDITS
AVERAGE GAME TIME
FREE GAME PERCENTAGE COINS THRU LEFT SLOT
AVERAGE BALL TIME
TOTAL FREE PLAYS
TOTAL PLAYS
TOTAL BALLS PLAYED
REPLAY PERCENT
TOTAL EXTRA BALLS
EXTRA BALL PERCENT
TOTAL SPECIALS
SPECIAL PERCENT
TOTAL MATCHES
REPLAY 1 AWARDS
6HF*R7R$XGLWV
REPLAY 2+ AWARDS
TOTAL REPLAYS
HIGH SCORE AWARDS
HIGH SCORE PERCENT
0 - 3M SCORES
3M - 4M SCORES
4M - 5M SCORES
5M - 5.5M SCORES
5.5M - 6M SCORES
6M - 6.5M SCORES
6.5M - 7M SCORES
COINS THRU RIGHT SLOT
7M - 7.5M SCORES
7.5M - 8M SCORES
P’MATES LIT (PEEK-A-B)
ADV. TOWARDS CTRFOLDMB
CTRFOLD MB LIT
CTRFOLD MB STARTS:
2+ CTRFOLD MB STARTS
CTRFOLD MB JACKPOTS
CTRFOLD MB 2X JPOT LIT
CNTFOLD MB 2X JPOTS
CTRFOLD MB 3X JPOT LIT
CTRFOLD MB 3X JPOTS
TOTAL RABBIT HEADS
0-50 RABBIT HEADS
51-75 RABBIT HEADS
76-100 RABBIT HEADS
P’MATES LIT (TEASE)
P’MATES LIT (RABBIT HD)
P’MATES (MANSION)
5 P’MATES COLLECTED
6/7 P’MATES COLLECTED
101-150 RABBIT HEADS 8/9 P’MATES COLLECTED
8.5M - 9M SCORES
201-250 RABBIT HEADS 12+ P’MATES COLLECTED
251-300 RABBIT HEADS MANSION MANIA STARTS
301-350 RABBIT HEADS
2+ MANSION MANIA STARTS
RABBIT HEADS (LOOPS) 351-400 RABBIT HEADS MANSION MANIA JACKPOTS
RABBIT HEADS (RT RAMP) 401-500 RABBIT HEADS
RABBIT HEADS (T. LANES)
501+ RABBIT HEADS
RABBIT HEADS (B. LANES) P’MATES LIT (SPLASH)
6HFWLRQ&KDSWHU
3DJH
PJ PARTY H-U STARTS
2+ PJ PARTY H-U STARTS
PJ PARTY H-U AWARDS
COINS THRU 5TH SLOT
COINS THRU 6TH SLOT
TOTAL COINS
9M - 9.5M SCORES
METER CLICKS
SOFTWARE METER
TOTAL EARNINGS
TILTS
PROPRIETARY (63)
TOTAL BALLS SAVED
BASE REPLAY
SERVICE CREDITS
PROPRIETARY (56)
LEFT FLIPPER USED
BALL SEARCH STARTED
PROPRIETARY (57)
20M+ SCORES
AVERAGE SCORES
LOST BALL FEEDS
RIGHT FLIPPER USED
PROPRIETARY (58)
PROPRIETARY (67)
PROPRIETARY (59)
PROPRIETARY (68)
9.5M - 10M SCORES
LOST BALL GAME STARTS
10M - 12M SCORES
12M - 15M SCORES
15M - 20M SCORES
BONUS X MAXED
BONUS X AWARDS
TEASE STARTED
2+ TEASE STARTED
TEASE COMPLETED
PEEK-A-BOO HITS
PEEK-A-BOO COMP.
151-200 RABBIT HEADS 10/11 P’MATES COLLECTED 2+ PEEK-A-BOO COMP.
COINS THRU 4TH SLOT
8M - 8.5M SCORES
P’MATES LIT (PH. SHOOT) PJ PARTY MBALL AWARDS
COINS THRU CENTER SLOT
PEEK-A-BOO AWARDS
STRIP POKER CARDS
STRIP POKER LIT
STRIP POKER STARTS
2+ STRIP POKER STARTS
STRIP POKER WINS
LEFT DRAINS
PROPRIETARY (60)
CENTER DRAINS
PROPRIETARY (61)
RIGHT DRAINS
PROPRIETARY (62)
STRIP POKER LOSSES
STRIP POKER FOLDS
EX. BALL LIT (GROTTO)
SURPRISE PACKAGE LIT
2 WAY COMBO (PHOTO LIT) TOTAL SP PKG AWARDS
PHOTO SHOOT STARTS
2+ PHOTO SHOOT STARTS
SP PKG CTRFOLD AWDS
SP PKG SPLASH AWDS
PHOTO SHOOT AWARDS SP PKG PH. SHOOT AWDS
PHOTO SHOOT COMPLETED
SPLASH LETTERS
SPLASH STARTS
2+ SPLASH STARTS
SPLASH AWARDS
NOT USED
GROTTO LIT
GROTTO AWARDS
NOT USED
EX. BALL LIT (P’MATES)
SP PKG TEASE AWDS
SP PKG JPOT HURRY-UP
LEFT ORBITS
RIGHT ORBITS
LEFT RAMPS
CENTER RAMPS
RIGHT RAMPS
PEEK-A-BOO HITS
BALL LOCK ARRIVALS
LEFT RETURN LANES
SP PKG PJ MBALL AWDS RIGHT RETURN LANES
SP PKG PJ H-U AWDS
BUNNY LOOPS LIT
DROP TARGET HITS
POP BUMPER HITS
BUNNY LOOP AWARDS SURPRISE TARGET HITS
SKILL SHOTS MADE
JPOT H-U STARTS
2+ JPOT H-U STARTS
GROTTO ARRIVALS
VUK ARRIVALS
TOP LANE ARRIVALS
JPOT H-U AWARDS
*R7R
$XGLWV0HQX
6HFWLRQ &K DS WHU RI *R 7R $XGLWV 0HQX
2YHU YL HZ
The Portals• Service Menu System provides 172 Audits for accounting purposes and for evaluation of Game
Programming. The Audits are divided into 3 groups: Earnings Audits (Audits 01-14), Standard Audits
(Audits 15-68) and Feature Audits (Programming Use Only) (Audits 69-172). Audits which are named
Proprietary are also for Future Expansion or Programming. Game code may get upgraded during production;
compare all Audits in the display with the manual and make any corrections to the Audit Table (previous page), as
necessary. Audits are subject to change (with or without notice). To view Audits in the display, enter the
Portals• Service Menu System. For how to RESET Audits, see Section 3, Chapter 6, GO TO RESET MENU.
After entering Portals• , the MAIN MENU now appears. Select the "AUD" Icon in the MAIN MENU with
either the Red "LEFT" or Green "RIGHT" Buttons (the Flipper Buttons operates in the same manner)
and press the Black "ENTER" Button (the Start Button operates in the same manner). The AUDITS
MENU appears. Continue through this chapter for the explanation & usage of the Icons in the AUDITS MENU.
(D UQLQJV$X GLW V
To initiate, from the AUDITS MENU, select the "EARN" Icon with either the Red "LEFT" or Green
"RIGHT" Buttons and press the Black "ENTER" Button. Select and activate either of the ">>"
Mini-Icons to view the next or previous Audit in this group. The display will describe the Audit Number,
Audit Name and the current Audit Total or Value. The current Audit will remain in the display until the next Audit is
chosen or when the Sub-Menu is exited.
$XG 1ž
01
02
03
04
05
06
07
08
09
10
11
12
13
14
$XGLW 1DPH
$XGLW 'HILQLWLRQ
TOTAL PAID CREDITS
Provides the total number of paid credits.
FREE GAME PERCENTAGE Provides the percentage total by dividing Audit 27, TOTAL FREE
PLAYS, by Audit 28, TOTAL PLAYS.
In
seconds, the average ball time is derived from the total play time
AVERAGE BALL TIME
divided by Audit 15, TOTAL BALLS PLAYED.
AVERAGE GAME TIME
The average game time is expressed in minutes and seconds (0:00).
COINS THRU LEFT SLOT
Provides the total number of times Coin Mech. Switch 06 was closed.
COINS THRU RIGHT SLOT
Provides the total number of times Coin Mech. Switch 04 was closed.
COINS THRU CENTER SLOT Provides the total number of times Coin Mech. Switch 05 was closed.
COINS THRU 4TH SLOT
Provides the total number of times Coin Mech. Switch 02 was closed.
COINS THRU 5TH SLOT
Provides the total number of times Coin Mech. Switch 07 was closed.
COINS THRU 6TH SLOT
Provides the total number of times Coin Mech. Switch 03 was closed.
TOTAL COINS
Provides the total amount of coins registered through all the slots.
The total cash value accumulated since the last Factory Reset occurred.
TOTAL EARNINGS
See Sec. 3, Chp. 6, GO TO RESET MENU, Reset Coin Audits.
Provides
the total number of money clicks accumulated. Based on the
METER CLICKS
country’s lowest coin denomination used for the game credit.
Provides the continuing total of Meter Clicks. This audit cannot be
SOFTWARE METER
reset; the display shows the constant addition of Meter Clicks.
*R7R
$XGLWV0HQX
6HFWLRQ&KDSWHU
3DJH
6HF*R7R$XGLWV
*272$8', 760(18
6W DQGDU G$X GLW V
To initiate, from the AUDITS MENU, select the "S.P.I." Icon with either the Red "LEFT" or Green
"RIGHT" Buttons and press the Black "ENTER" Button. Select and activate either of the ">>"
Mini-Icons to view the next or previous Audit in this group. The display will describe the Audit Number,
Audit Name and the current Audit Total or Value. The current Audit will remain in the display until the next Audit is
chosen or when the Sub-Menu is exited.
$XG 1ž
15
16
$XGLW 1DPH
$XGLW 'HILQLWLRQ
TOTAL BALLS PLAYED
TOTAL EXTRA BALLS
6HF*R7R$XGLWV
Provides the total number of Regular and Extra Balls.
Provides the total number of Extra Balls awarded.
Provides the percentage total by dividing Audit 16, TOTAL EXTRA
17 EXTRA BALLS PERCENT
BALLS, by Audit 28, TOTAL PLAYS.
18 REPLAY 1 AWARDS
Provides the total awards (Credits, Extra Balls or Scores) for Level 1.
Provides the total awards (Credits, Extra Balls or Scores) for Level 2 or
19 REPLAY 2+ AWARDS
higher.
Provides the total awards (Credits, Extra Balls or Scores) for
20 TOTAL REPLAYS
exceeding replay score levels.
Provides the percentage total from dividing Audit 20, TOTAL
21 REPLAY PERCENT
REPLAYS, by Audit 28, TOTAL PLAYS. The percentage reflects
replay total awards for exceeding replay score levels.
Provides the total Awards (Credits, Extra Balls, or Scores) for making
22 TOTAL SPECIALS
Specials.
Provides the percentage total by dividing Audit 22, TOTAL SPECIALS,
23 SPECIAL PERCENT
by Audit 28, TOTAL PLAYS.
Provides the total Credits awarded for matching the last two digits of
the score with the System-Generated Match Number at the end of the
24 TOTAL MATCHES
game. Percentage of Match Credits is adjustable from 0% to 10% by
Adjustment 07, MATCH PERCENTAGE, if enabled. See Section 3,
Chapter 4, GO TO ADJUSTMENTS MENU, Standard Adjustments.
Provides
the total (Credits, Extra Balls, or Scores) awarded for
25 HIGH SCORE AWARDS
exceeding the High-Score-To-Date scores.
Provides the percentage total by dividing Audit 25, HIGH SCORE
26 HIGH SCORE PERCENT
AWARDS, by Audit 28, TOTAL PLAYS.
Provides the total Free Credits for Replays, High-Score-To-Date,
27 TOTAL FREE PLAYS
Specials and Match.
This total is derived by adding the sum of Audit 01, TOTAL PAID
28 TOTAL PLAYS
CREDITS, and Audit 27, TOTAL FREE PLAYS. (Note that Free
Credits are not recorded in the Audit until they are actually used.)
Provides the total number of games the Player’s final score was
29 0 - 3M SCORES
between 0 and 2,999,990 points.
Provides the total number of games the Player’s final score was
30 3M - 4M SCORES
between 3,000,000 and 3,999,990 points.
Provides the total number of games the Player’s final score was
31 4M - 5M SCORES
between 4,000,000 and 4,999,990 points.
Provides
the total number of games the Player’s final score was
32 5M - 5.5M SCORES
between 5,000,000 and 5,499,990 points.
Provides the total number of games the Player’s final score was
33 5.5M - 6M SCORES
between 5,500,000 and 5,999,990 points.
Provides
the total number of games the Player’s final score was
34 6M - 6.5M SCORES
between 6,000,000 and 6,499,990 points.
Provides the total number of games the Player’s final score was
35 6.5M - 7M SCORES
between 6,500,000 and 6,999,990 points.
Provides the total number of games the Player’s final score was
36 7M - 7.5M SCORES
between 7,000,000 and 7,499,990 points.
Provides the total number of games the Player’s final score was
37 7.5M - 8M SCORES
between 7,500,000 and 7,999,990 points.
Provides the total number of games the Player’s final score was
38 8M - 8.5M SCORES
between 8,000,000 and 8,499,990 points.
Standard Audits 39-68 continued on the next page.
6HFWLRQ&KDSWHU
3DJH
*R7R
$XGLWV0HQX
6WDQGDUG$X GLWV&RQWLQXHG
39
8.5M - 9M SCORES
40
9M - 9.5M SCORES
41
9.5M - 10M SCORES
42
10M - 12M SCORES
43
12M - 15M SCORES
44
15M - 20M SCORES
45
20M+ SCORES
46
AVERAGE SCORES
47
SERVICE CREDITS
48
BALL SEARCH STARTED
49
LOST BALL FEEDS
50
LOST BALL GAME STARTS
51
LEFT DRAINS
52
CENTER DRAINS
53
54
RIGHT DRAINS
TILTS
55
TOTAL BALLS SAVED
56-63
64
PROPRIETARY
BASE REPLAY
65
LEFT FLIPPER USED
66
RIGHT FLIPPER USED
67-68 PROPRIETARY
Comments or Notes:
*R7R
$XGLWV0HQX
$XGLW 'HILQLWLRQ
Provides the total number of games the Player’s final score was
between 8,500,000 and 8,999,990 points.
Provides the total number of games the Player’s final score was
between 9,000,000 and 9,499,990 points.
Provides the total number of games the Player’s final score was
between 9,500,000 and 9,999,990 points.
Provides the total number of games the Player’s final score was
between 10,000,000 and 11,999,990 points.
Provides the total number of games the Player’s final score was
between 12,000,000 and 14,999,990 points.
Provides the total number of games the Player’s final score was
between 15,000,000 and 19,999,990 points.
Provides the total number of games the Player’s final score was
20,000,000 points and over.
This total is derived from adding the Final Score of each game to a
table and dividing this sum by Audit 28, TOTAL PLAYS.
Provides the total number of times the Portals• Green Button (Dedicated Switch 7) was pushed in Attract Mode. Note: For how to
receive Service Credits, see Sec. 3, Chp. 1, Service Switch Set
Access & Use. For how to delete Service (and Paid Credits), see
Section 3, Chapter 6, GO TO RESET MENU, Reset Credits.
Provides the total number of times the game performed a Ball Search.
Provides the total number of times the game added a pinball to play
when it could not find a pinball after Ball Search. See Sec. 3, Chp. 2,
GO TO DIAGNOSTICS MENU, Technicians Alert [Pinball Detection].
Provides the total number of times the game started with a pinball missing from the ball trough at the start of a game. See Sec. 3, Chp. 2,
GO TO DIAGNOSTICS MENU, Technicians Alert [Pinball Detection].
Provides the total number of times Rollover Switch 57 was closed.
Provides the total number of times the pinball had drained when the
last switch closed was not Switch 57 or Switch 60.
Provides the total number of times Rollover Switch 60 was closed.
Provides the total number of times Contact Switch 56 was closed.
Provides the total number of times this feature was used (this feature
can be turned ON or OFF, see Adj. 37, FREEZE TIME in Section 3,
Chp. 4, GO TO ADJUSTMENTS MENU, Standard Adjustments).
This feature is enabled at the start of each pinball and is disabled as
soon as a predetermined number of switches are "closed" or the
allocated time has expired.
Proprietary Audits are used for Future Expansion or Programming.
Provides the current base Replay Level Score.
Provides the total number of times the Left Flipper Button (Dedicated
Switch 1) was pushed in Game Mode.
Provides the total number of times the Right Flipper Button
(Dedicated Switch 3) was pushed in Game Mode.
Proprietary Audits are used for Future Expansion or Programming.
6HFWLRQ&KDSWHU
3DJH
6HF*R7R$XGLWV
$XGLW 1DPH
)HD WX UH$XGL WV3U RJUD PPLQJ8VH2QO \ To initiate, from the AUDITS MENU, select the "PB" Icon with either the Red "LEFT" or Green "RIGHT"
Buttons and press the Black "ENTER" Button. Select and activate either of the ">>" Mini-Icons to view
the next or previous Audit in this group. The display will describe the Audit Number, Audit Name and the
current Audit Total or Value. The current Audit will remain in the display until the next Audit is chosen or when the
Sub-Menu is exited. Audits Definition: Programming Use Only. The proprietary information provides the total
number of times a feature was started, awarded, lit, played and/or completed (awarded); also, the total number of
Switch Closures during certain modes or features are tracked (a predetermined single/multiple variations of switch
closures are used to determine the lighting and/or completion of the feature stated).
$XG 1ž
6HF*R7R$XGLWV
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
$XGLW 1DPH
ADV. TOWARDS CTRFOLD MB
CTRFOLD MB LIT
CTRFOLD MB STARTS
2+ CTRFOLD MB STARTS
CTRFOLD MB JACKPOTS
CTRFOLD MB 2X JPOT LIT
CNTFOLD MB 2X JPOTS
CTRFOLD MB 3X JPOT LIT
CTRFOLD MB 3X JPOTS
RABBIT HEADS (LOOPS)
RABBIT HEADS (RT RAMP)
RABBIT HEADS (T. LANES)
RABBIT HEADS (B. LANES)
TOTAL RABBIT HEADS
0-50 RABBIT HEADS
51-75 RABBIT HEADS
76-100 RABBIT HEADS
101-150 RABBIT HEADS
151-200 RABBIT HEADS
201-250 RABBIT HEADS
251-300 RABBIT HEADS
301-350 RABBIT HEADS
351-400 RABBIT HEADS
401-500 RABBIT HEADS
501+ RABBIT HEADS
P’MATES LIT (SPLASH)
P’MATES LIT (PH. SHOOT)
P’MATES LIT (PEEK-A-B)
P’MATES LIT (TEASE)
P’MATES LIT (RABBIT HD)
P’MATES (MANSION MANIA)
5 P’MATES COLLECTED
6/7 P’MATES COLLECTED
8/9 P’MATES COLLECTED
10/11 6 P’MATES COLLECTED
12+ P’MATES COLLECTED
MANSION MANIA STARTS
2+ MANSION MANIA STARTS
MANSION MANIA JACKPOTS
PJ PARTY H-U STARTS
2+ PJ PARTY H-U STARTS
PJ PARTY H-U AWARDS
PJ PARTY MBALL AWARDS
BONUS X MAXED
BONUS X AWARDS
TEASE STARTED
2+ TEASE STARTED
TEASE COMPLETED
PEEK-A-BOO HITS
PEEK-A-BOO COMP.
2+ PEEK-A-BOO COMP.
PEEK-A-BOO AWARDS
6HFWLRQ&KDSWHU
3DJH
$XG 1ž
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
$XGLW 1DPH
STRIP POKER CARDS
STRIP POKER LIT
STRIP POKER STARTS
2+ STRIP POKER STARTS
STRIP POKER WINS
STRIP POKER LOSSES
STRIP POKER FOLDS
2 WAY COMBO (PHOTO LIT)
PHOTO SHOOT STARTS
2+ PHOTO SHOOT STARTS
PHOTO SHOOT AWARDS
PHOTO SHOOT COMPLETED
SPLASH LETTERS
SPLASH STARTS
2+ SPLASH STARTS
SPLASH AWARDS
NOT USED
GROTTO LIT
GROTTO AWARDS
NOT USED
EX. BALL LIT (P’MATES)
EX. BALL LIT (GROTTO)
SURPRISE PACKAGE LIT
TOTAL SP PKG AWARDS
SP PKG CTRFOLD AWDS
SP PKG SPLASH AWDS
SP PKG PH. SHOOT AWDS
SP PKG TEASE AWDS
SP PKG JPOT HURRY-UP
SP PKG PJ MBALL AWDS
SP PKG PJ H-U AWDS
BUNNY LOOPS LIT
BUNNY LOOP AWARDS
SKILL SHOTS MADE
JPOT H-U STARTS
2+ JPOT H-U STARTS
JPOT H-U AWARDS
LEFT ORBITS
RIGHT ORBITS
LEFT RAMPS
CENTER RAMPS
RIGHT RAMPS
PEEK-A-BOO HITS
BALL LOCK ARRIVALS
LEFT RETURN LANES
RIGHT RETURN LANES
DROP TARGET HITS
POP BUMPER HITS
SURPRISE TARGET HITS
GROTTO ARRIVALS
VUK ARRIVALS
TOP LANE ARRIVALS
*R7R
$XGLWV0HQX
*R7R3U LQWHU 0HQX 237, 21 $/86(21/<
Operational Usage Note: The use of the following Sub-Menus are OPTIONAL and provided as a
convenience only. No special equipment or unique software (mentioned below) was included with
your Pinball Game. To initiate, from the AUDITS MENU, select the "PRNT" Icon with either the Red
"LEFT" or Green "RIGHT" Button and press the Black "ENTER" Button. The PRINTER MENU appears. A
Printer Interface Board, "Hand-Held" Printer & the Alison Interface Program are required for proper operation
of these Sub-Menus. Entering the menus & selecting/activating the Icons without the equipment mentioned, will
not affect the Pinball Game nor the operation of the Portals• Service Menu System in any way. For information
or details on the required equipment in this Menu, call or eMail Technical Support (contact info on the back cover).
4XLFN3ULQWRXW
To initiate, from the PRINTER MENU, select the "QUIK" Icon with either the Red or Green Button and
press the Black Button. Select either the "-" or "+" Mini-Icon and press the Black Button to start the
printout. Per the display instruction, the Start Button can also be pressed to start the printout. Only the
Earnings Audits can be retrieved and/or printed for further processing.
To initiate, from the PRINTER MENU, select the "ALISON" Icon with either the Red or Green Button and
press the Black Button. Select either the "-" or "+" Mini-Icon and press the Black Button to start the
download. Per the display instruction, the Start Button can also be pressed to start the download. All
Earnings, Standard & Feature Audits can be retrieved and/or printed for further processing.
5HVHW3ULQWH U
To initiate, from the PRINTER MENU, select the "RESET" Icon with either the Red or Green Button and
press the Black Button. Select either the "-" or "+" Mini-Icon and press the Black Button to clear the
"Nº of copies printed" count total appearing in the display. Operational Usage Note: Activating the
"QUIK" Icon (in the previous Quick Printout) without the special equipment and unique software, will still provide a
"count total" in this Reset Printer Menu, which does not affect the operation of the Portals• Service Menu System
in any way. Activating this "RESET" Icon will reset the "count total" in the display to 00.
$8',7$%%5(9,$7,21686(',17+,6&+$37(5
AWDS:
Awards
K:
Thousand
PJ:
Pajama
COMP.:
Completed
M:
Million
MANSION MANIA:
Playmate of the Year
CTRFOLD:
Centerfold
MB or MBALL:
Multiball
SH.:
Shot
EX.:
Extra
P’MATES:
Playmates
SP PKG:
Surprise Package
H-U:
Hurry-Up
PEEK-A-B:
Peek-A-Boo
JPOTS:
Jackpots
PH.:
Photo
)RUKRZWR5(6(7$XGLWVVHH6HFWLRQ&KDSWHU*2725(6(70(18
(DUQLQJV 2QO\
*R7R
$XGLWV0HQX
(DUQLQJV $OO 6WDQGDUG )HDWXUH $XGLWV
6HFWLRQ&KDSWHU
3DJH
6HF*R7R$XGLWV
)XOO3ULQWRXW
$'-8670(17 7$%/(
$'-8670(17 1$0(
86$ '()$8/7
01
02
03
04
05
06
07
08
09
6HF$GMXVWPHQWV
10
11
12
13
14
15
67$1'$5'$'- 8670(176
$'-8670(17 1$0(
<285 6(77,1*
REPLAYS: FIXED/AUTO ‡
... 12% ...
REPLAY LEVELS ‡
1
REPLAY AWARD
CREDIT
FREE GAME LIMIT
05
EXTRA BALL LIMIT
09
GAME PRICING ‡
USA 5
MATCH PERCENTAGE
8%
BALLS PER GAME
03
TILT WARNINGS
01
REPLAY BOOST
YES
CREDIT LIMIT
30
ALLOW HIGH SCORES
YES
HIGH SCORE #1 AWARDS
01
HIGH SCORE #2 AWARDS
00
HIGH SCORE #3 AWARDS
00
86$ '()$8/7
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
<285 6(77,1*
HIGH SCORE #4 AWARDS
00
HIGH SCORE #5 AWARDS
00
DEFAULT HIGH SCORE #1
50,000,000
DEFAULT HIGH SCORE #2
40,000,000
DEFAULT HIGH SCORE #3
30,000,000
DEFAULT HIGH SCORE #4
20,000,000
DEFAULT HIGH SCORE #5
10,000,000
HSTD RESET COUNT
2,000
HIGH SCORE INITIALS
3 INITIALS
FREE PLAY
NO
CUSTOM MESSAGE
ON
FLASH LAMP POWER
NORMAL
COIL PULSE POWER
NORMAL
KNOCKER VOLUME
NORMAL
GAME RESTART
YES
$'-8670(17 1$0(
86$ '()$8/7
<285 6(77,1*
EXTRA BALL PERCENTAGE
31
20%
EXTRA BALL MEMORY
32
ON
SPECIAL PERCENTAGE
33
2%
SPECIAL MEMORY
34
ON
BILL VALIDATOR
35
NO
BKGRND MUSIC VOLUME
36
01
FREEZE TIME
37
AUTO
UK POST SAVE ENABLED †
38
NO
TIMED PLUNGER
39
OFF
FLIPPER BALL LAUNCH
40
DISABLED
COINDOOR BALL SAVER
41
NO
COMPETITION MODE
42
NO
CONSOLATION BALL
43
YES
PROPRIETARY
44
LOCATION ID
45
01
GAME ID
46
00
‡ Adj. 01, 02 & 06 have a "Drop-Down" Table for further customization.
† Adj. 38 is utilized only for the UK (UK Dip Sw. Option Setting 2).
Note: If Game & Display ROMs other than USA are installed, along with the proper Dip Switch Settings, different Defaults will appear.
If changes are made (or your Defaults are not USA), enter them with pencil in the YOUR SETTING spaces provided for reference.
$'-8670(17 1$0(
86$ '()$8/7
47
48
49
50
51
52
<285 6(77,1*
CENTERFOLD DIFFICULTY
MODERATE
PLAYMATES DIFFICULTY
MODERATE
PJ PARTY DIFFICULTY
MODERATE
TEASE DIFFICULTY
MODERATE
SPLASH DIFFICULTY
MODERATE
PEEK-A-BOO DIFFICULTY
MODERATE
6HFWLRQ&KDSWHU
3DJH
)($785($'-8670(176
$'-8670(17 1$0(
86$ '()$8/7
<285 6(77,1*
PHOTO SHOOT DIFFICULTY
53 MODERATE
STRIP POKER DIFFICULTY
54 MODERATE
MANSION MANIA DIFF.
55 MODERATE
STEPPER MOTOR ENABLED
56
YES
CTRFOLD MOTOR ENABLED
57
YES
TRIANGLE MTR ENABLED
58
YES
6KRUWFXW WR 6WDQGDUG $GMXVWPHQW $'-8670(17 1$0(
86$ '()$8/7
<285 6(77,1*
MAGAZINE ENABLED
59
YES
PEEK-A-BOO ENABLED
60
YES
ADULT CONTENT ENABLED
61 DOTS & SOUNDS ON
# PLAYMATES FOR EB
62
09
FAST BONUS COUNTDOWN
63
NO
PROPRIETARY
64
00
*R7R
$GMXVWPHQWV0HQX
6HFWLRQ & KD SW H U R I *R 7R $G MXV WP HQWV 0HQX
2YHU YLHZ
The Portals• Service Menu System provides 64 Adjustments to vary Game Functions to customize for your
particular needs. The Adjustments are divided into 2 groups: Standard Adjustments (01-46) and Feature
Adjustments (47-64). Adjustments which are named Proprietary are also for Future Expansion or Programming. Game code may get upgraded during production; compare all Adjustments in the display with the manual
and make any corrections to the Adjustment Table (previous page), as necessary. Adjustments are subject to
change (with or without notice). To view Adjustments in the display, enter the Portals• Service Menu System.
When a change is made and then the next / previous Adjustment is selected (or the Sub-Menu is exited), the
display will momentarily flash REQUEST INSTALLED. For further customization of Game Play Difficulty or
Game Play Type or how to RESET ONLY the Adjustments, see Sec. 3, Chp. 5, GO TO INSTALLS MENU.
*272$'-8670(1760(18
After entering Portals• , the MAIN MENU now appears. Select the "ADJ" Icon in the MAIN MENU with
either the Red "LEFT" or Green "RIGHT" Buttons (the Flipper Buttons operates in the same manner)
and press the Black "ENTER" Button (the Start Button operates in the same manner). The
ADJUSTMENTS MENU appears. Continue through this chapter for the explanation & usage of the Icons in the
ADJUSTMENTS MENU.
6WDQ GDUG$GMXVWP HQWV To initiate, from the ADJUSTMENTS MENU, select the "S.P.I." Icon with either the Red "LEFT" or Green
"RIGHT" Buttons and press the Black "ENTER" Button. Select and activate either of the ">>"
Mini-Icons to view the next or previous Adjustment in this group. Select and activate either of the "-" or
"+" Mini-Icons to change the setting, if desired (the Default Setting is noted in the definitions below). The display
will describe the Adjustment Number, the Adjustment Name and the current Adjustment Setting. The current
Adjustment will remain in the display until the next Adjustment is chosen or when the Sub-Menu is exited.
$GM 1ž
$GMXVWPHQW 1DPH
01
REPLAYS: FIXED / AUTO
02
REPLAY LEVELS
03
REPLAY AWARD
04
FREE GAME LIMIT
05
EXTRA BALL LIMIT
*R7R
$GMXVWPHQWV0HQX
$GMXVWPHQW 'HILQLWLRQ
Set between 01% - 50% and Fixed (0%) for Replay Levels. Default is
12%. Four levels may be selected. Adjustments allow awarding of a
credit or an extra ball as each level is exceeded. With the Autopercentage Feature, if the actual replay percentage is higher or lower
than that desired, the game will automatically adjust for the new
recommended percentage score(s).
Set between 1 - 4 or NONE for the number of replay levels to be
active. Default is 1. A "Drop-Down" Table appears (after selection of
number of replay levels) showing Replay Level 1. Adjust Replay Level
1 between 10M - 9.99B. Adjust Replay Level 2, 3 and/or 4 respectively.
Set to CREDIT, EXTRA BALL, NONE or SPECIAL. Default is CREDIT.
Set between 01 - 09 or NO FREE GAMES. Default is 05. Set the
maximum number of Free Games that may be accumulated per game.
Set between 01 - 09 or NO EXTRA BALLS. Default is 09. Set the
maximum number of Extra Balls that may be accumulated per game.
Standard Adjustment 06 continued on the next page.
6HFWLRQ&KDSWHU
3DJH
6HF$GMXVWPHQWV
Important: The Coin Door must be OPEN allowing the Memory Protect Switch
to be disabled, so any Adjustment changes can be made.
6WDQGDUG$GMXV WPHQWV&RQWLQX HG
$GMXVWPHQW 1DPH
$GMXVWPHQW 'HILQLWLRQ
There are two (2) methods available for Coin Switch Programming:
Standard & Custom. Set between USA 1 thru EURO 12 or
CUSTOM. USA Factory Default Setting is USA 5.
The Dip Switch Settings for the Country, which must be changed on the CPU/Sound Board for correct operation.
For a Standard Selection (USA or International): Select & activate either of the "-" or "+" Mini-Icons to move
backward or forward in the Display; With your choice appearing in the display, select & activate the ">>" Mini-Icon
(to advance to Adj. 7) to "lock-in" change (display will momentarily flash REQUEST INSTALLED).
06
GAME PRICING
If CUSTOM is selected (appears in display), after selecting & activating any Mini-Icon (except for "-" or "+"), the
display will momentarily flash REQUEST INSTALLED with the display "LEFT COIN: 0 PULSE" appearing. Use
the "<<" or ">>" Mini-Icons to select the next choice (see Table Examples below) and the "-" or "+" Mini-Icons to
customize the PULSES, CREDITS & CLICKS from 0 to 99.
The prescribed number of PULSES required for 1 CREDIT must be set according to the Pricing Scheme desired.
Some simple calculations are required to get the proper set-up. After customizing, test the set-up with appropriate
Coins or Bills and adjust, if necessary. Note: Clicks can be changed if an optional Coin Meter is installed.
LEFT
CENTER
RIGHT
4TH
25¢
$1.00
25¢
Not Used
Coin Mechanisms Used
Example 1
1 /50¢
2 /75¢ 3/ $1.00
Pricing Scheme Desired
LEFT
COIN:
CENTER
COIN:
RIGHT
COIN:
3
12
3
PULSES PULSES PULSES
FOURTH
ONE
COIN: CREDIT:
1
PULSE
BONUS
1:
BONUS
2:
BONUS
1:
BONUS
2:
0
0
0
0
4
PULSES PULSES
PULSES CREDITS CREDITS
LEFT
COIN:
CENTER RIGHT FOURTH
COIN:
COIN:
COIN:
1
4
1
1
CLICK
CLICKS
CLICK
CLICK
6HF$GMXVWPHQWV
In Example 1, note the LEFT (and RIGHT) COIN: 3 PULSES and ONE CREDIT: 4 PULSES. Since every Coin
inserted produces 3 Pulses and every Credit requires 4 Pulses, 2 Coins (50¢) will produce 6 Pulses (4 Pulses for
the 1st Credit + 2 Pulses remains in "escrow"). The third Coin (75¢) provides another 3 Pulses for a total of 5
Pulses (4 Pulses for the 2nd Credit + 1 Pulse remains in "escrow"). The fourth Coin ($1.00) provides another 3
Pulses for a total of 4 Pulses (4 Pulses for the 3rd Credit + 0 Pulses remain). The CENTER COIN: 12 PULSES is
set this way, because the Center Coin has a Bill Validator; every $1 Bill inserted produces 12 Pulses or 3 Credits.
LEFT
CENTER
RIGHT
4TH
25¢
$1.00
25¢
Not Used
Coin Mechanisms Used
Example 2
1 /50¢
2 /75¢ 7/ $2.00
Pricing Scheme Desired
LEFT
COIN:
CENTER
COIN:
RIGHT
COIN:
3
12
3
PULSES PULSES PULSES
FOURTH
ONE
COIN: CREDIT:
1
PULSE
4
BONUS
1:
BONUS
2:
BONUS
2:
LEFT
COIN:
CENTER RIGHT FOURTH
COIN:
COIN:
COIN:
0
1
0
1
4
1
1
PULSES
CREDIT
CREDITS
CLICK
CLICKS
CLICK
CLICK
24
PULSES PULSES
BONUS
1:
In Example 2, similar to Example 1, however, BONUS CREDITS are implemented. In addition to receiving 3
plays for every $1.00, the player is awarded an extra Credit for every 2nd dollar inserted before game start.
LEFT
CENTER
RIGHT
4TH
25¢
$1.00
25¢
Not Used
Coin Mechanisms Used
Example 3
1 /25¢ 6/ $1.00 13/ $2.00
Pricing Scheme Desired
LEFT
COIN:
CENTER
COIN:
RIGHT
COIN:
5
20
5
FOURTH
ONE
COIN: CREDIT:
0
4
BONUS
1:
20
PULSES PULSES PULSES PULSES PULSES PULSES
BONUS
2:
BONUS
1:
BONUS
2:
LEFT
COIN:
CENTER RIGHT FOURTH
COIN:
COIN:
COIN:
40
1
0
1
4
1
1
PULSES
CREDIT
CREDITS
CLICK
CLICKS
CLICK
CLICK
In Example 3, a Pricing Scheme for a cheaper game is shown. An extra Pulse is put in escrow for every 25¢,
thus at 4X 25¢ inserted, another Credit is given, and the BONUS 1: 20 PULSES threshold is also met, so 6/ $1.00
is achieved. BONUS 2: 40 PULSES is set, so when this threshold is met with $2.00, 13 Credits are produced.
LEFT
CENTER
RIGHT
4TH
10p
50p
£1
20p
Coin Mechanisms Used
LEFT
COIN:
Example 4
1 /30p
2 /50p
5 /£1
1
Pricing Scheme Desired
PULSE
CENTER
COIN:
RIGHT
COIN:
6
15
FOURTH
ONE
COIN: CREDIT:
2
3
BONUS
1:
BONUS
2:
BONUS
1:
BONUS
2:
0
0
0
0
PULSES PULSES PULSES PULSES PULSES
PULSES CREDITS CREDITS
LEFT
COIN:
CENTER RIGHT FOURTH
COIN:
COIN:
COIN:
1
4
1
1
CLICK
CLICKS
CLICK
CLICK
In Example 4, a Pricing Scheme using a different currency (British Sterling) is shown to provide another way
coins (or tokens) can be utilized to custom tailor to your own needs.
WARNING: Changes made in any Adjustments will be lost after a FACTORY RESET or removal of the CPU/Sound Board Batteries.
The USA Standard Pricing Select Table (shown below) and the International Standard Pricing Select Table
(shown next page), details the following: 1. Dip Switch (Sw. 300) Setting required on the CPU/Sound Board. 2.
Country Setting Option(s) 3. Coin Mechanisms: Money values which are typically used in the Left, Center,
Right and 4th Coin Slot Switches. 4. Pricing Scheme: Number of plays or credits for the price amount shown.
86$6WDQGDUG3ULFLQJ6HOHFW7DEOH
CPU/SOUND BOARD
DIP SWITCH 300
SETTING
Pos.
ON
OFF
99999999
Note: The Country
Setting Option for USA
noted with "«" & "»"
denotes the Factory
Default Setting (subject
to change).
COIN MECHANISMS (SWITCHES)
COINS THRU ... SLOT:
LEFT CENTER RIGHT
4TH
COUNTRY
SETTING
OPTION(S)
USA 1
USA 2
USA 3
USA 4
USA 5
USA 6
USA 7
USA 8
6HFWLRQ&KDSWHU
3DJH
ª
$.25
$1.00
$.25
PRICING SCHEME
Number of Plays (Credits) for Price Amount Shown
See "Appendix J" for Coin Cards Examples & Info!
ª
1 /$.25
1 /$.50
1 /$.50
1 /$.50
1 /$.50
1 /$.50
1 /$.50
1 /$.50
2 /$.75
3 /$1.00
For USA Defaults 6 & 7 use:
5 /$2.00 755-5400-02
2 /’4 X 25¢’ 3 /$1.00 Bill
4 /$1.50
6 /$2.00
3 /$1.00
Requires SPI
Coin Card(s)
Part Number
755-5400-01
755-5400-02
755-5400-02
755-5400-02
755-5400-00
9
Used to promote
the Bill Validator.
755-5400-00
*R7R
$GMXVWPHQWV0HQX
,QWHUQDWLRQDO6WDQGDUG3ULFLQJ6FKHPH7DEOH
CPU/SOUND BOARD
DIP SWITCH 300
SETTING
ON
OFF
Pos.
ON
OFF
Pos.
ON
OFF
Pos.
ON
OFF
Pos.
ON
OFF
Pos.
ON
OFF
Pos.
ON
OFF
Pos.
ON
OFF
Pos.
ON
OFF
Pos.
ON
OFF
Pos.
ON
OFF
Pos.
ON
OFF
Pos.
ON
OFF
Pos.
ON
OFF
Pos.
ON
OFF
Pos.
ON
OFF
Pos.
ON
OFF
8
PRICING SCHEME
Number of Plays (Credits) for Price Amount Shown
See "Appendix J" for Coin Cards Examples & Info!
Requires SPI
Coin Card(s)
Part Number
For different Euro Pricing Scheme (other than below default), go to Adjustment 06 and scroll through Euro 1-12 for new setting (see end of table Euro 1-12).
L.20
9999999
optional L.50
8 88
Australia 1 © 20¢
$A1
9
9 9 9 9 Australia 2
8
Belgium
L.20
9 9 9 9 9 9 9 Euro 2
optional L.50
88
9 9 9 9 9 9 Canada © Can$.25 Can$.25
8
8
Denmark 1 © 1 DKr
5 DKr
9 9 9 9 9 9 Denmark 2
8 8
Finland
L.20
9 9 9 9 9 9 Euro 11
optional L.50
88
France
L.20
9
9 9 9 9 9 Euro 10
optional L.50
888
Germany
L.20
9 9 9 9 9 Euro 2
optional L.50
8888
Greece
L.20
9 9 9 9 Euro 6
optional L.50
8
© L.50
Italy 1
9 9 9 9 9 9 9 Italy 2
8
Netherlands
L.20
9 9 9 9 9 9 9 Euro 3
optional L.50
8
New Zealand 1 ©
9 9 9 9 9 9 9 New Zealand 2 $NZ1
8 8
Norway 1 © 10 NKr 5 NKr
9 9 9 9 9 9 Norway 2
8
8
L.50
9 9 9 9 9 9 Portugal
8
8
Spain
L.20
9 9 9 9 9 9 Euro 3
optional L.50
88 8
Sweden 1 © 1 SKr
5 SKr
9 9 9 9 9 Sweden 2
88
Switzerland 1 ©
99
9 9 9 9 Switzerland 2 1 SwF 2 SwF
Austria
Euro 9
L1.00 L2.00
ª
$A2
1 /L1.00
2 /L1.50
1 /$A1
1 /$A1
3 /$A2
3 /L2.00
755-5401-09
755-5406-00
For different Euro Pricing Scheme (other than below default), go to Adjustment 06 and scroll through Euro 1-12 for new setting (see end of table Euro 1-12).
L1.00 L2.00
Can$1
Can$2 ª
10 DKr
20 DKr
ª
1 /L.50
5 /L2.00
1 /50¢
2 /75¢
3/ Can$1
1 /3 DKr
1 /2 DKr
2 /5 DKr
3 /5 DKr
7 /10 DKr
755-5401-02
755-5400-00
or -01 or -02
755-5402-00
For different Euro Pricing Scheme (other than below default), go to Adjustment 06 and scroll through Euro 1-12 for new setting (see end of table Euro 1-12).
L1.00 L2.00
1 /L1.00
4 /L2.00
755-5401-11
For different Euro Pricing Scheme (other than below default), go to Adjustment 06 and scroll through Euro 1-12 for new setting (see end of table Euro 1-12).
L1.00 L2.00
1 /L1.00
3 /L2.00
7 /L3.00
755-5401-10
For different Euro Pricing Scheme (other than below default), go to Adjustment 06 and scroll through Euro 1-12 for new setting (see end of table Euro 1-12).
L1.00 L2.00
1 /L.50
5 /L2.00
755-5401-02
For different Euro Pricing Scheme (other than below default), go to Adjustment 06 and scroll through Euro 1-12 for new setting (see end of table Euro 1-12).
L1.00 L2.00
2 /L.50
755-5401-06
Italy & Portugal Only: For different Euro Pricing Scheme (other than below settings), go to Adjustment 06 and scroll to Custom for this Unique Coin Door & Mech.
ª
L.50
1 /L.50
1 /L.50
3 /L2.00
755-5401-01 &
755-5401-08
1 /L.50
3 /L1.00
755-5401-03
For different Euro Pricing Scheme (other than below default), go to Adjustment 06 and scroll through Euro 1-12 for new setting (see end of table Euro 1-12).
L1.00 L2.00
$NZ2
ª
1 /$NZ1
1 /$NZ1
3 /$NZ2
20 NKr
ª
1 /5 NKr
1 /10 NKr
3 /20 NKr
755-5406-00
755-5403-00
Italy & Portugal Only: For different Euro Pricing Scheme (other than below settings), go to Adjustment 06 and scroll to Custom for this Unique Coin Door & Mech.
L.50
1 /L.50
755-5401-01
For different Euro Pricing Scheme (other than below default), go to Adjustment 06 and scroll through Euro 1-12 for new setting (see end of table Euro 1-12).
L1.00 L2.00
1 /L.50
3 /L1.00
755-5401-03
10 SKr
ª 1 /10 SKr
2 /15 SKr
3 /20 SKr
5 SwF
ª 1 /1 SwF
6 /5 SwF
3 /2 SwF
9 /5 SwF
755-5404-00
1 /5 SKr
1 /1 SwF
755-5405-00
Note: The Country Setting Option for Non-Euro Countries above noted with "«" & "»" denotes the Factory Default Setting (subject to change).
Pos.
ON
OFF
9
888
9999
/()7
UK 1
UK 2
UK 3
UK 4
UK 5
UK 6
&(17(5
10p
5,*+7
50p
£1
7+
20p
7+
UK also utilizes the 5th Coin Slot Switch (not available with Custom Pricing).
£2
©
ª
3 /£1
4 /£1
1 /50p
1 /30p
1 /£1
3 /£2
7 /£2
5 /£2
4 /£1
3 /£2
*use blank side
755-5407-00
755-5407-01*
755-5407-01
755-5407-01*
755-5407-00
755-5407-01*
Note: The Country Setting Option for Non-Euro Countries above noted with "«" & "»" denotes the Factory Default Setting (subject to change).
Pos.
ON
OFF
S E E A B O V E
S E T T I N G S
Euro 1-12 are alternate settings for
above countries using the Euro:
If choosing an alternate Euro Setting
other than your Country’s Default,
please remember to use your above
noted Country Dip Switch Setting.
Alternate Settings
Euro 1
Euro 2
Euro 3
Euro 4
Euro 5
Euro 6
Euro 7
Euro 8
Euro 9
Euro 10
Euro 11
Euro 12
/()7
L.20
optional
&(17(5
L.50
5,*+7
7+
L1.00 L2.00
1 /L.50
1 /L.50
1 /L.50
1 /L.50
1 /L.50
2 /L.50
1 /L1.00
1 /L1.00
1 /L1.00
1 /L1.00
1 /L1.00
2 /L1.00
5 /L2.00
3 /L1.00
6 /L2.00
3 /L1.00
5 /L4.00
3 /L2.00
2 /L1.50
3 /L2.00
4 /L2.00
9 /L4.00
7 /L2.00
3 /L2.00
7 /L3.00
755-5401-01
755-5401-02
755-5401-03
755-5401-04
755-5401-05
755-5401-06
755-5401-07
755-5401-08
755-5401-09
755-5401-10
755-5401-11
755-5401-12
Standard Adj. 07-26 continued on the next page.
*R7R
$GMXVWPHQWV0HQX
6HFWLRQ&KDSWHU
3DJH
6HF$GMXVWPHQWV
Pos.
COIN MECHANISMS (SWITCHES)
COINS THRU ... SLOT:
LEFT CENTER RIGHT
4TH
COUNTRY
SETTING
OPTION(S)
6WDQGDUG$GMXV WPHQWV&RQWLQX HG
$GMXVWPHQW 1DPH
$GMXVWPHQW 'HILQLWLRQ
Set between 0% - 10% or OFF. Default is 8%. At 0% the match
display occurs at the end of the game but never awards a credit.
08 BALLS PER GAME
Set between 02 - 05. Default is 03. Set the number of balls per game.
Set to 00, 01 or 03. Default is 01. Set the number of plumb bob tilt
09 TILT WARNINGS
switch closures before the ball in play is tilted.
Set to YES or NO. Default is YES. When set to YES, exceeding a
replay will set a temporary replay level for each time a replay level is
10 REPLAY BOOST
surpassed. This new level will equal the previous replay level (when
the replay was awarded) plus 50M for each following game, until the
replays have all been played (then the previous level is resumed).
11 CREDIT LIMIT
Set between 04 - 50. Default is 30. Set the maximum credits allowed.
Set to YES or NO. Default is YES. When set to YES if a player
exceeds any 1 of the 4 High Scores, the player may receive an award
12 ALLOW HIGH SCORES
(depending on Adj. 03, Replay Award). Set to NO to disable this
feature. There are 5 High Scores that will allow the player to enter
their initials (or name) (see Adj. 24, High Score Initials).
Set between 00 - 05. Default is 01. Set the number of awards,
13 HIGH SCORE #1 AWARDS
awarded for exceeding Level 1 (the highest of the five (5) Levels).
Set between 00 - 03. Default is 00. Set the number of awards,
14 HIGH SCORE #2 AWARDS
awarded for exceeding Level 2.
Set between 00 - 02. Default is 00. Set the number of awards,
15 HIGH SCORE #3 AWARDS
awarded for exceeding Level 3.
Set between 00 - 01. Default is 00. Set the number of awards,
16 HIGH SCORE #4 AWARDS
awarded for exceeding Level 4.
Set between 00 - 01. Default is 00. Set the number of awards,
17 HIGH SCORE #5 AWARDS
awarded for exceeding Level 5.
Set between 1,000,000 - 9,999,000,000 or 00 (increments of 1M).
18 DEFAULT HIGH SCORE #1
Default is 50,000,000. Set the desired High Score Level to which
Level 1 may be achieved (not affected by Adj. 23, HSTD Reset Count).
Set between 1,000,000 - 9,999,000,000 or 00 (increments of 1M).
19 DEFAULT HIGH SCORE #2
Default is 40,000,000. Set the desired High Score Level to which
Level 2 may be achieved (not affected by Adj. 23, HSTD Reset Count).
Set between 1,000,000 - 9,999,000,000 or 00 (increments of 1M).
20 DEFAULT HIGH SCORE #3
Default is 30,000,000. Set the desired High Score Level to which
Level 3 may be achieved (not affected by Adj. 23, HSTD Reset Count).
Set between 1,000,000 - 9,999,000,000 or 00 (increments of 1M).
21 DEFAULT HIGH SCORE #4
Default is 20,000,000. Set the desired High Score Level to which
Level 4 may be achieved (not affected by Adj. 23, HSTD Reset Count).
Set between 1,000,000 - 9,999,000,000 or 00 (increments of 1M).
22 DEFAULT HIGH SCORE #5
Default is 10,000,000. Set the desired High Score Level to which
Level 5 may be achieved (not affected by Adj. 23, HSTD Reset Count).
Set between 100 - 9,900 or OFF (increments of 100). Default is 2,000.
HSTD (High Score To Date). Set the number of games between
23 HSTD RESET COUNT
"automatic resets of high score levels" to "backup settings" and "ball
time average" adjustments. Set to OFF for "no reset or adjustment".
Set to 3 INITIALS or 10 LETTER. Default is 3 INITIALS. When set to
24 HIGH SCORE INITIALS
3 INITIALS, the player is allowed only 3 initials to input. When set to
10 LETTER NAME, the player is allowed to enter 10 initials to input.
Set to YES or NO. Default is NO. When set to YES, no coins are
25 FREE PLAY
required for Game Play.
Set to ON, CHANGE or OFF. Default is ON. When set to CHANGE
(select
the "+" Mini-Icon to change settings until "CHANGE" appears
CUSTOM MESSAGE
in
the
display,
then select the ">>" Mini-Icon to access.) This
26 View the Custom Message Shortcut
adjustment
can
be accessed in two (2) ways by either selecting the
summary (end of this chapter) for
"S.P.I."
and
advancing to this Adjustment, or can be directly
Icon
how to enter text or symbols.
accessed by selecting the "ABCD CUST MSG" Icon in the
ADJUSTMENTS MENU.
Standard Adjustments 27-41 continued on the next page.
07
MATCH PERCENTAGE
6HF$GMXVWPHQWV
6HFWLRQ&KDSWHU
3DJH
*R7R
$GMXVWPHQWV0HQX
6WDQGDUG$GMXV WPHQWV&RQWLQX HG
27
FLASH LAMP POWER
28
COIL PULSE POWER
29
KNOCKER VOLUME
30
GAME RESTART
31
EXTRA BALL
PERCENTAGE
32
EXTRA BALL MEMORY
33
SPECIAL PERCENTAGE
34
SPECIAL MEMORY
35
BILL VALIDATOR
36
BKGRND (BACKGROUND)
MUSIC VOLUME
37
FREEZE TIME (BALL SAVE)
$GMXVWPHQW 'HILQLWLRQ
Set to NORMAL, DIM or OFF. Default is NORMAL. When set to DIM,
the Flash Lamps impulse power is reduced by 25% and when set to
OFF the Flash Lamps will not flash.
Set to NORMAL, HARD or SOFT. Default is NORMAL. When set to
HARD, the coil pulse power is increased by 12.5% of the normal
pulse rate. When set to SOFT the coil pulse power is decreased by
12.5% of the normal pulse rate. This adj. is provided to compensate
for Low Line or High Line voltage conditions where the solenoids
(coils) appear to kicking too weak or too hard. Adjust as required.
Set to NORMAL, LOW or OFF. Default is NORMAL. When set to
LOW, the volume is decreased 50%. When set to OFF, no sound is
heard when the "knocker" is sounded.
Set to YES or NO. Default is YES. When set to YES, a new game
may be started during any ball after the first ball is completed (if
credits are available). Pressing the Start Button during the first ball
will add additional players. When set to NO, the game disables the
Start Button after the first ball until the final ball is in play. Review
Section 2, Chapter 1, Game Operations & Features for details.
Set between 0% - 50%. Default is 20%. This adjustment allows the
operator to adjust how frequently the Extra Ball Feature is made
available to the player.
Set to ON or OFF. Default is ON. When set to ON, this feature bonus
will be retained in memory from ball-to-ball for the same player. When
set to OFF, this feature will go out at the end of each ball.
Set between 0% - 5%. Default is 2%. This adjustment allows the
operator to adjust how frequently the Special Feature is made
available to the player.
Set to ON or OFF. Default is ON. When set to ON, this feature bonus
will be retained in memory from ball-to-ball for the same player. When
set to OFF, this feature will go out at the end of each ball.
Set to YES or NO. Default is NO. When set to YES, in Game Attract
Mode the Display will show an "Insert Bill Animation." When set to
NO, the Display will show an "Insert Coin Animation."
Set between 01 - 15. Default is 01. After volume is set via Portals
Service Buttons (see Sec. 3, Chp. 1,...Intro) this adjustment can be
utilized to adjust the background music (1 all the way on, 15 all the
way off) while keeping the Special Sound FX the same level.
Set to OFF, 0:01-0:15 or AUTO. Default is AUTO. When set to OFF
this feature is unavailable. Set between 0:01 through 0:15 (single
increments) for the ball to be sent back into play if the time set is not
met (per ball). Set to AUTO to automatically adjust the Freeze Timer
based on the average ball time.
UK Only Dip Switch Must Be Set
Set to YES or NO. Default is NO, (UK Default is YES). When set to
YES this feature is available when lit. Set to NO to disable this
feature. (UK Games have Outlane/Center Post Save Devices which
are accessed in differently; Non-UK Games cannot adjust this setting.)
Set to OFF or 0:15 - 1:00. Default is OFF. When set to 0:15 to 1:00,
the plunger will "Autoplunge" the ball (at the time set) when the ball is
at the beginning of play, awaiting the skill shot by the player.
Set to DISABLED, LEFT FLIPPER, RIGHT FLIPPER, EITHER
FLIPPER or BOTH FLIPPERS. Default is DISABLED. This feature
allows the player to operate the Auto Ball Launch with the FLIPPER
BUTTON(S) depending on which setting is chosen.
Set to YES or NO. Default is NO. When set to NO, this feature is not
available. When set to YES, this feature allows the Coin Door to be
opened during game play; the ball will drain but the game will be
placed "on hold". When the Coin Door is closed, the pinball will
return to the Shooter Lane, and the game will resume.
Standard Adjustments 42-46 continued on the next page.
38
UK POST SAVE ENABLED
39
TIMED PLUNGER
40
FLIPPER BALL LAUNCH
41
COINDOOR BALL SAVER
*R7R
$GMXVWPHQWV0HQX
6HFWLRQ&KDSWHU
3DJH
6HF$GMXVWPHQWV
$GMXVWPHQW 1DPH
6WDQGDUG$GMXV WPHQWV&RQWLQX HG
$GMXVWPHQW 1DPH
42
COMPETITION MODE
43
CONSOLATION BALL
44
PROPRIETARY
45
LOCATION ID
46
GAME ID
$GMXVWPHQW 'HILQLWLRQ
Set to YES or NO. Default is NO. When set to NO, this feature is not
available. If an Install of either $.50 or Free Play Competition was
made (changing the default to YES), and was changed back to NO,
the COMPETITION MODE will be turned OFF (see Sec. 3, Chp. 5, GO
TO INSTALLS MENU, $. 50 or Free Play Competition). Set to YES,
this feature is available (required for Competition Modes); this feature
will equalize random game features and global score values during
multi-player games.
Set to YES or NO. Default is YES. When set to YES, the EXTRA
BALL (Playfield Light Insert) will be lit on the last ball in play, if certain
programming criteria is met.
Proprietary Adjustments are used for Future Expansion or Programming.
Set between 00 to 9999. Default is 00. This adjustment allows the
operator to assign a location identification number to the audit print-out
sheet. (Will not be affected by Factory Reset.)
Set between 00 to 9999. Default is 00. This adjustment allows the
operator to assign a game identification number to the audit print-out
sheet. (Will not be affected by Factory Reset.)
)HDWXUH$GMX VWPHQWV
6HF$GMXVWPHQWV
To initiate, from the ADJUSTMENTS MENU, select the "PB" Icon with either the Red "LEFT" or Green
"RIGHT" Buttons and press the Black "ENTER" Button. Select and activate either of the ">>"
Mini-Icons to view the next or previous Adjustment in this group. Select and activate either of the "-" or
"+" Mini-Icons to change the setting, if desired (the Default Setting is noted in the definitions below). The display
will describe the Adjustment Number, the Adjustment Name and the current Adjustment Setting. The current
Adjustment will remain in the display until the next Adjustment is chosen or when the Sub-Menu is exited.
$GM 1ž
47
48
49
50
51
52
53
54
55
$GMXVWPHQW 1DPH
CENTERFOLD
DIFFICULTY
PLAYMATES
DIFFICULTY
PJ PARTY
DIFFICULTY
TEASE
DIFFICULTY
SPLASH
DIFFICULTY
PEEK-A-BOO
DIFFICULTY
PHOTO SHOOT
DIFFICULTY
STRIP POKER
DIFFICULTY
MANSION MANIA
DIFF.
STEPPER MOTOR
ENABLED
56
(BACKPANEL DROP
SCREEN)
$GMXVWPHQW 'HILQLWLRQ
Set to EXEASY, EASY, MODERATE, HARD or EXHARD. Default is
MODERATE. Determines how this Feature is started and played.
Set to YES or NO. Default is YES. When set to YES, the Drop
Screen Stepper Motor (Q19, Q20, Q21 & Q22) is operational. When
set to NO, the Stepper Motor is disabled. Change setting to NO if
any of the following is malfunctioning or is awaiting service and/or
repair: Stepper Motor (Q19, Q20, Q21 & Q22) and/or Switch 52.
Game programming is automatically changed to accomodate player.
Feature Adjustments 57-64 continued on the next page.
6HFWLRQ&KDSWHU
3DJH
*R7R
$GMXVWPHQWV0HQX
)H DWXUH$GMX VWPHQWV &RQWLQXHG
57
CTRFOLD (CENTERFOLD)
MOTOR ENABLED
TRIANGLE MTR (MOTOR)
ENABLED
58
(ROTATING TRIANGLE
BILLBOARD)
59
60
MAGAZINE
ENABLED
PEEK-A-BOO
ENABLED
(BEADED SCREEN)
61
ADULT CONTENT
ENABLED
62
# PLAYMATES FOR EB
(EXTRA BALL)
63
64
FAST BONUS
COUNTDOWN
PROPRIETARY
$GMXVWPHQW 'HILQLWLRQ
Set to YES or NO. Default is YES. When set to YES, the DC
Bi-Directional Relay Board (Q31 & Q32) for the Centerfold Motor is
operational. When set to NO, the Bi-Directional Relay Board is
disabled. Change setting to NO if any of the following is
malfunctioning or is awaiting service and/or repair: Bi-Directional
Relay Board (Q31 & Q32), Centerfold Motor and/or Sw. 43 & 44.
Game programming is automatically changed to accomodate player.
Set to YES or NO. Default is YES. When set to YES, the Relay
Board (Q22) for the Rotating Triangle Billboard Motor is operational.
When set to NO, the Relay Board is disabled. Change setting to NO
if any of the following is malfunctioning or is awaiting service and/or
repair: Relay Board (Q22), Rotating Triangle Billboard Motor
and/or Switches 29 & 30. Game programming is automatically
changed to accomodate player.
Set to YES or NO. Default is YES. When set to YES, the Magazine
Assembly (Q14) is operational. When set to NO, the Coil (Q14) is
disabled. Change setting to NO if any of the following is
malfunctioning or is awaiting service and/or repair: Coil (Q14). Game
programming is automatically changed to accomodate player.
Set to YES or NO. Default is YES. When set to YES, the
Peek-A-Boo Beaded Assembly (Q7 & Q8) is operational. When set
to NO, the Coils (Q7 & Q8) are disabled. Change setting to NO if any
of the following is malfunctioning or is awaiting service and/or repair:
Coil (Q7) and/or Coil (Q8). Game programming is automatically
changed to accomodate player.
Set to DOTS & SOUNDS OFF, DOTS & SOUNDS ON, DOTS ON or
SOUNDS ON. Default is DOTS & SOUNDS ON. Set to DOTS &
SOUNDS OFF to disable "adult content" in both audible (sounds
and/or words) & visual (dot display graphics). To disable only the
visual, select DOTS OFF. To disable only the sounds, select SOUNDS
OFF.
Set to 02 through 11. Default is 09. The Extra Ball Feature will be
turned off after the amount set (equals the number of Game Modes
Played) is acheived.
Set to YES or NO. Default is NO. When set to NO, thIs feature is not
available. When set to YES, this feature is available.
Proprietary Adjustments are used for Future Expansion or Programming.
)RUIXUWKHUFXVWRPL]DWLRQRI*DPH3OD\'LIILFXOW\RU*DPH3OD\7\SHRUKRZWR
5(6(721/<WKH$GMXVWPHQWVVHH6HFWLRQ&KDSWHU*272,167$//60(18
6HOHFW DQ\ ,QVWDOOV
*R7R
$GMXVWPHQWV0HQX
5HVHW DOO $GMXVWPHQWV ,QVWDOOV
6HFWLRQ&KDSWHU
3DJH
6HF$GMXVWPHQWV
$GMXVWPHQW 1DPH
&XVWRP0HVVDJH
To go directly to Adjustment 26, Custom Message, from the ADJUSTMENT MENU, select the "CUST
MSG" Icon either the Red "LEFT" or Green "RIGHT" Buttons and press the Black "ENTER" Button.
At the top left corner of the Display, the letter A is indicated (blinking) in the first available position
(Thirty-Six (36) characters including spaces are available). Vary the letter(s) by operating the Left and Right
Flipper Buttons (or "RED" or "GREEN" Buttons). With the desired letter indicated, depress the Start Button to
lock in the letter and advance to the next character. Repeat this procedure until the desired message is completed
in the display. Select the "<" or ">" characters to back-space (erase) and/or to move forward in an already typed
message. After completion, press the "BLACK" Button, "REQUEST INSTALLED" is indicated and then exits
this sub-menu.
6HF$GMXVWPHQWV
)RUIXUWKHUFXVWRPL]DWLRQRI*DPH3OD\'LIILFXOW\RU*DPH3OD\7\SHRUKRZWR
5(6(721/<WKH$GMXVWPHQWVVHH6HFWLRQ&KDSWHU*272,167$//60(18
6HOHFW DQ\ ,QVWDOOV
6HFWLRQ&KDSWHU
3DJH
5HVHW DOO $GMXVWPHQWV ,QVWDOOV
*R7R
$GMXVWPHQWV0HQX
6HFWLRQ &K DS WHU RI *R7R,QVWDOOV0HQX
2YHU YL HZ
The Portals• Service Menu System provides 14 Installs to vary Game Play Difficulty or Game Play Type and
Install Factory.
Important: The Coin Door must be OPEN allowing the Memory Protect Switch
to be disabled, so any Install changes can be made.
For detailed customization or to check current Adjustments Defaults (either changed by YOU in the
Adjustments Menu or by this Installs Menu or for Factory Default Settings), see Section 3, Chapter 4, GO TO
ADJUSTMENTS MENU. Important: Before preceding, write down any previously changed Adjustment
Defaults. After completing one or more of the Installs in this Chapter, go back to the ADJUSTMENTS MENU to
see which Standard and/or Feature Adjustments have changed (Feature Adjustment and/or settings are subject
to change during production, and may differ than what is described in the tables below each Install explanation).
If the settings are not to your liking, perform one of the following:
1.: Manually change the Standard & Feature Adjustments Settings (perform task in the Adjustments Menu).
or
Multiple Installs can be set to vary game play; however, for Installs that have one or more Adjustments in
common, the last "Install" selected & activated, will supersede any previously changed Adjustment(s) from any
prior Installs.
For example, if you want a 5-BALL Game set to EXTRA EASY: Select and activate the "5BAL" Icon first (which
will typically change any Feature Difficulty Adjustments to HARD), then select & activate the "X.EZ" Icon to
change back the Difficulty Adjustments to EXTRA EASY. However, if the "X.EZ" Icon was selected & activated
first, then the "5BAL" Icon was selected & activated, the game will be set to a 5-BALL Game set to HARD.
:$51,1*
6HOHFWLRQDFWLYDWLRQRIWKH
,QVWDOO)DFWRU\,FRQZLOO
FKDQJHDOO$GMXVWPHQWV
,QVWDOOVWRWKH)DFWRU\'HIDXOW
*272, 167$//60(18
After entering Portals• , the MAIN MENU now appears. Select the "INST" Icon in the MAIN MENU with
either the Red "LEFT" or Green "RIGHT" Buttons (the Flipper Buttons operates in the same manner)
and press the Black "ENTER" Button (the Start Button operates in the same manner). The INSTALLS
MENU appears. Continue through this chapter for the explanation & usage of the Icons in the INSTALLS MENU.
, QVW DO O([ WU D(D V\
To initiate, from the INSTALLS MENU, select the "X.EZ" Icon with either the Red "LEFT" or Green
"RIGHT" Buttons and press the Black "ENTER" Button. Game Play Difficulty is set to EXTRA EASY.
"REQUEST INSTALLED" is indicated and returns to the INSTALLS MENU with the "X.EZ" Icon flashing.
STANDARD ADJUSTMENT(S) NEW SETTINGS:
NONE
*R7R
,QVWDOOV0HQX
FEATURE ADJUSTMENTS NEW SETTINGS*:
47-55
... DIFFICULTY
EXTRA EASY
* Feature Adjustments and/or settings are subject to change.
6HFWLRQ&KDSWHU
3DJH
6HF*R7R,QVWDOOV
2.: Install Factory to reset all of the Standard & Feature Adjustments back to the Factory Default Settings,
(see the end of this chapter).
, QVW DO O(D V\
To initiate, from the INSTALLS MENU, select the "EASY" Icon with either the Red "LEFT" or Green
"RIGHT" Buttons and press the Black "ENTER" Button. Game Play Difficulty is set to EASY.
"REQUEST INSTALLED" is indicated and returns to the INSTALLS MENU with the "EASY" Icon
flashing.
STANDARD ADJUSTMENT(S) NEW SETTINGS:
NONE
FEATURE ADJUSTMENTS NEW SETTINGS*:
47-55
... DIFFICULTY
EASY
* Feature Adjustments and/or settings are subject to change.
, QVW DO O1 R UP D O
To initiate, from the INSTALLS MENU, select the "FACT" Icon with either the Red "LEFT" or Green
"RIGHT" Buttons and press the Black "ENTER" Button. Game Play Difficulty is set to MODERATE.
"REQUEST INSTALLED" is indicated and returns to the INSTALLS MENU with the "FACT" Icon flashing.
STANDARD ADJUSTMENT(S) NEW SETTINGS:
NONE
FEATURE ADJUSTMENTS NEW SETTINGS*:
47-55
... DIFFICULTY
MODERATE
* Feature Adjustments and/or settings are subject to change.
, QVW DO O+D UG
6HF*R7R,QVWDOOV
To initiate, from the INSTALLS MENU, select the "HARD" Icon with either the Red "LEFT" or Green
"RIGHT" Buttons and press the Black "ENTER" Button. Game Play Difficulty is set to HARD.
"REQUEST INSTALLED" is indicated and returns to the INSTALLS MENU with the "HARD" Icon
flashing.
STANDARD ADJUSTMENT(S) NEW SETTINGS:
NONE
FEATURE ADJUSTMENTS NEW SETTINGS*:
47-55
... DIFFICULTY
HARD
* Feature Adjustments and/or settings are subject to change.
, QVW DO O([ WU D+D UG
To initiate, from the INSTALLS MENU, select the "X.HD" Icon with either the Red "LEFT" or Green
"RIGHT" Buttons and press the Black "ENTER" Button. Game Play Difficulty is set to EXTRA
HARD. "REQUEST INSTALLED" is indicated and returns to the INSTALLS MENU with the "X.HD" Icon
flashing.
STANDARD ADJUSTMENT(S) NEW SETTINGS:
NONE
FEATURE ADJUSTMENTS NEW SETTINGS*:
47-55
... DIFFICULTY
EXTRA HARD
* Feature Adjustments and/or settings are subject to change.
, QVW DO O %D OO
To initiate, from the INSTALLS MENU, select the "3BAL" Icon with either the Red "LEFT" or Green
"RIGHT" Buttons and press the Black "ENTER" Button. Game Play Type is set to 3-BALL PLAY.
"REQUEST INSTALLED" is indicated and returns to the INSTALLS MENU with the "3BAL" Icon flashing.
STANDARD ADJUSTMENT(S) NEW SETTINGS:
08
BALLS PER GAME
6HFWLRQ&KDSWHU
3DJH
03
FEATURE ADJUSTMENTS NEW SETTINGS*:
47-55
... DIFFICULTY
MODERATE
* Feature Adjustments and/or settings are subject to change.
*R7R
,QVWDOOV0HQX
, QVW DO O%D OO
To initiate, from the INSTALLS MENU, select the "5BAL" Icon with either the Red "LEFT" or Green
"RIGHT" Buttons and press the Black "ENTER" Button. Game Play Type is set to 5-BALL PLAY.
"REQUEST INSTALLED" is indicated and returns to the INSTALLS MENU with the "5BAL" Icon flashing.
STANDARD ADJUSTMENT(S) NEW SETTINGS:
08
BALLS PER GAME
05
FEATURE ADJUSTMENTS NEW SETTINGS*:
47-55
... DIFFICULTY
HARD
* Feature Adjustments and/or settings are subject to change.
&RPSHWLWLRQDND,)3$ To initiate, from the INSTALLS MENU, select the "PAY" Icon with either the Red "LEFT" or Green
"RIGHT" Buttons and press the Black "ENTER" Button. Game Play Type is set to TOURNAMENT
PAY MODE. "REQUEST INSTALLED" is indicated and returns to the INSTALLS MENU with the "PAY"
Icon flashing.
FEATURE ADJUSTMENTS NEW SETTINGS*:
06
GAME PRICING
USA 5
NONE
09
TILT WARNINGS
02
25
FREE PLAY
NO
30
GAME RESTART
NO
41 (Note 1)
COINDOOR BALL SAVER
(YES) (Note 1)
42 (Note 2)
COMPETITION MODE
YES (Note 2)
Note 1: Adjustment 41 Default will not change; Installing $ .50 Competition will override this Adjustment regardless of the setting.
Note 2: If Adjustment 42 is changed back to NO after this Install, the Competition Mode Install will be canceled (turned off).
If Competition Mode was set, it is suggested to "Install Factory" to restore all Adjustments (Factory Default); then to recustomize, if desired.
)UHH3OD \&RPSHWLWLRQD ND (;32RU3$3$
To initiate, from the INSTALLS MENU, select the "FREE" Icon with either the Red "LEFT" or Green
"RIGHT" Buttons and press the Black "ENTER" Button. Game Play Type is set to TOURNAMENT
FREE MODE. "REQUEST INSTALLED" is indicated and returns to the INSTALLS MENU with the
"FREE" Icon flashing.
STANDARD ADJUSTMENT(S) NEW SETTINGS:
FEATURE ADJUSTMENTS NEW SETTINGS:
09
TILT WARNINGS
02
NONE
25
FREE PLAY
YES
30
GAME RESTART
NO
41 (Note 1)
COINDOOR BALL SAVER
(YES) (Note 1)
42 (Note 2)
COMPETITION MODE
YES (Note 2)
Note 1: Adjustment 41 Default will not change; Installing $ .50 Competition will override this Adjustment regardless of the setting.
Note 2: If Adjustment 42 is changed back to NO after this Install, the Competition Mode Install will be canceled (turned off).
If Competition Mode was set, it is suggested to "Install Factory" to restore all Adjustments (Factory Default); then to recustomize, if desired.
, QVW DO O+RPH3OD \
To initiate, from the INSTALLS MENU, select the "HOME" Icon with either the Red "LEFT" or Green
"RIGHT" Buttons and press the Black "ENTER" Button. Game Play Type is set to NORMAL HOME
PLAY. "REQUEST INSTALLED" is indicated and returns to the INSTALLS MENU with the "HOME" Icon
flashing.
STANDARD ADJUSTMENT(S) NEW SETTINGS:
05
07
25
31
41
EXTRA BALL LIMIT
MATCH PERCENTAGE
FREE PLAY
EXTRA BALL PERCENTAGE
COINDOOR BALL SAVER
*R7R
,QVWDOOV0HQX
09
10%
YES
30%
YES
FEATURE ADJUSTMENTS NEW SETTINGS:
NONE
6HFWLRQ&KDSWHU
3DJH
6HF*R7R,QVWDOOV
STANDARD ADJUSTMENT(S) NEW SETTINGS:
) LO P 6WD U5HVHW
To initiate, from the INSTALLS MENU, select the "STAR" Icon with either the Red "LEFT" or Green
"RIGHT" Buttons and press the Black "ENTER" Button. Game Play Type is set to EASY HOME
PLAY. "REQUEST INSTALLED" is indicated and returns to the INSTALLS MENU with the "STAR" Icon
flashing.
STANDARD ADJUSTMENT(S) NEW SETTINGS:
05
25
EXTRA BALL LIMIT
FREE PLAY
09
YES
41
COINDOOR BALL SAVER
YES
FEATURE ADJUSTMENTS NEW SETTINGS*:
47-55
... DIFFICULTY
EASY
* Feature Adjustment and/or settings are subject to change.
, QVW DO O1 R YHO W\
This setting is recommended where local laws restrict certain game features.
To initiate, from the INSTALLS MENU, select the "NOV" Icon with either the Red "LEFT" or Green
"RIGHT" Buttons and press the Black "ENTER" Button. Game Play Type is set to RESTRICTED PLAY.
"REQUEST INSTALLED" is indicated and returns to the INSTALLS MENU with the "NOV" Icon flashing.
STANDARD ADJUSTMENT(S) NEW SETTINGS:
6HF*R7R,QVWDOOV
01
02
03
04
05
07
10
13-17
REPLAYS: FIXED/AUTO
REPLAY LEVELS
REPLAY AWARD
FREE GAME LIMIT
EXTRA BALL LIMIT
MATCH PERCENTAGE
REPLAY BOOST
HIGH SCORE ... AWARDS
FIXED (0%)
NONE
NONE
NO FREE GAMES
NO EXTRA BALLS
OFF
NO
00
FEATURE ADJUSTMENTS NEW SETTINGS*:
NONE
, QVW DO O$GG$%D OO
This setting is recommended where local laws restrict certain game features.
To initiate, from the INSTALLS MENU, select the "A.A.B" Icon with either the Red "LEFT" or Green
"RIGHT" Buttons and press the Black "ENTER" Button. Game Play Type is set to RESTRICTED PLAY.
"REQUEST INSTALLED" is indicated and returns to the INSTALLS MENU with the "A.A.B" Icon flashing.
STANDARD ADJUSTMENT(S) NEW SETTINGS:
03
04
05
07
13-17
REPLAY AWARD
FREE GAME LIMIT
EXTRA BALL LIMIT
MATCH PERCENTAGE
HIGH SCORE ... AWARDS
EXTRA BALL
NO FREE GAMES
09
OFF
00
FEATURE ADJUSTMENTS NEW SETTINGS*:
NONE
, QVW DO O)D FW RU \ 21/<D IIHFW VDO O$GMX VWPHQWV,QVWD OO V
To initiate, from the INSTALLS MENU, select the "FACT" Icon with either the Red "LT" or Green "RT"
Buttons and press the Black "ENT" Button.
All Installs will be reset to the Factory Default Settings.
"REQUEST INSTALLED" is indicated and the Service Menu is exited, returning to the Attract Mode.
STANDARD ADJUSTMENT(S) NEW SETTINGS:
FEATURE ADJUSTMENTS NEW SETTINGS*:
01-46
47-64
FACTORY DEFAULTS
FACTORY DEFAULTS
ALL STANDARD ADJ.
ALL FEATURE ADJ.
If Competition Mode was set, it is suggested to "Install Factory" to restore all Adjustments (Factory Default); then to recustomize, if desired.
)RUKRZWR5(6(7$XGLWVDOVRFDQ5(6(7+LJK6FRUHV&UHGLWVRU5HVHW$OO
$GMXVWPHQWVVHH6HFWLRQ&KDSWHU*2725(6(70(18
6HOHFW DQ\ 5HVHW
6HFWLRQ&KDSWHU
3DJH
5HVHW DOO $XGLWV $GMXVWPHQWV ,QVWDOOV
*R7R
,QVWDOOV0HQX
6HFWLRQ & KD SW H U R I *R7R5HVHW0HQX
2YHU YL HZ
The Portals• Service Menu System provides five (5) functions to reset Coin & Game Audits, High Scores,
Credits or to reset ALL AUDITS, ADJUSTMENTS & INSTALLS back to the Factory Default Settings.
Important: The Coin Door must be OPEN allowing the Memory Protect Switch
to be disabled, so any Reset changes can be made.
:$51,1*
$VVRRQDVDQ\5HVHW,FRQLV
VHOHFWHGDFWLYDWHGWKH
LQIRUPDWLRQDVVRFLDWHGZLWK
WKH5HVHW,FRQLVORVW
After entering Portals• , the MAIN MENU now appears. Select the "RESET" Icon in the MAIN MENU
with either the Red "LEFT" or Green "RIGHT" Buttons (the Flipper Buttons operates in the same
manner) and press the Black "ENTER" Button (the Start Button operates in the same manner). The
RESET MENU appears. Continue below for the explanation & usage of the Icons in the RESET MENU.
5HVHW &RL Q$ XGL WV
To initiate, from the RESET MENU, select the "COIN" Icon with either the Red or Green Buttons and
press the Black Button.
ONLY the Coin Audits (05-13) will be reset to zero (0), Factory Default
Settings. "REQUEST INSTALLED" is indicated and returns to the RESET MENU with the "COIN" Icon
flashing.
5HVHW *DPH$XGL WV
To initiate, from the RESET MENU, select the "AUD" Icon with either the Red or Green Buttons and
press the Black Button.
ONLY the Game Audits (01-04 and 15-Last Audit) will be reset to zero (0),
Factory Default Settings. Note: Coin Audits (05-13) & Software Meter Audit (14) will not be reset.
"REQUEST INSTALLED" is indicated and returns to the RESET MENU with the "AUD" Icon flashing.
Tournament Note: Tourn. Audits can only be reset if a new Tournament is started or a Factory Reset is done.
5HVHW +LJK6FRU HV
To initiate, from the RESET MENU, select the "HSTD" Icon with either the Red or Green Buttons and
press the Black Button.
ONLY the High Scores will be reset to the current values. Note: If these
five (5) adjustments were not personally changed by you, the Factory Default Settings will be used (see
Section 3, Chapter 4, GO TO ADJUSTMENTS MENU, Standard Adjustments 18-22). "REQUEST
INSTALLED" is indicated and returns to the RESET MENU with the "HSTD" Icon flashing.
5HVHW &U HGLW V
To initiate, from the RESET MENU, select the "CRED" Icon with either the Red or Green Buttons and
press the Black Button.
All Credits will be reset to zero (0), Factory Default Settings. "REQUEST
INSTALLED" is indicated and returns to the RESET MENU with the "CRED" Icon flashing.
)D FW RU \ 5HVHW
To initiate, from the RESET MENU, select the "FACT" Icon with either the Red or Green Buttons and
press the Black Button.
All Audits (except for Audit 14, Software Meter), Adjustments, Installs,
Tournament Audits and all Tournament Adjustments (including Sign Messages A-B), will be reset to
the Factory Default Settings. Note: To RESET ONLY the ADJUSTMENTS & INSTALLS (leaving all the Regular
Audits alone), see Section 3, Chapter 5, GO TO INSTALLS MENU, Install Factory. "REQUEST INSTALLED" is
indicated and the Service Menu is exited, returning to the Attract Mode.
*R7R
5HVHW0HQX
6HFWLRQ&KDSWHU
3DJH
6HF*R7R5HVHW
*2725(6(70(1 8
([ DPSOH
After entering Portals , the MAIN MENU now appears. Use the Red "LEFT" or Green "RIGHT" Buttons to
select the "RESET" Icon (GO TO RESET MENU).
Press the Black "ENTER" Button to activate this ICON. The RESET MENU now appears with the "COIN"
Icon (RESET COIN AUDITS) flashing:
6HF*R7R5HVHW
From the RESET MENU, select any of the Icons ("COIN", "AUD", "HSTD", "CRED") with either the Red or Green
Buttons and press the Black Button to activate the ICON chosen. After the ICON is selected & activated,
"REQUEST INSTALLED" is indicated and is returned to the RESET MENU with the previously selected Icon
flashing.
Important:
AT THIS TIME, DO NOT PRESS THE START BUTTON OR BLACK BUTTON
AFTER SELECTING ANY OF THE FIVE (5) ICONS UNLESS THIS IS WHAT IS
DESIRED. THE INFORMATION ASSOCIATED WITH THE RESET ICON WILL
BE LOST! PLEASE READ THE PREVIOUS PAGE FOR EXACTLY WHAT WILL
HAPPEN IF ANY OF THESE FIVE (5) ICONS ARE SELECTED & ACTIVATED.
Before performing any RESET, write down your last Audit Totals (see Section 3, Chapter 3, GO TO AUDITS
MENU) and any personalized Adjustment changes you may have made (see Section 3, Chapter 4, GO TO
ADJUSTMENTS MENU).
If the "FACT" Icon is select and activated, "REQUEST INSTALLED" is indicated and the Service Menu is exited,
returning to the Attract Mode. See the previous page for explanation & usage of the Icons in the RESET MENU.
6HFWLRQ&KDSWHU
3DJH
*R7R
5HVHW0HQX
6HFWLRQ & KD SW H U R I *R7R7RXUQDPHQW0HQX
2Y HU YLHZ
•
Game code may get upgraded during production;
compare all Tournament Adjustments & Audits in the
display with the manual and make any corrections to the
Tournament Adjustments and/or Audits Tables (next
page), as necessary. Tournament Adjustments & Audits
are subject to change (with or without notice). To view
Tournament Adjustments & Audits in the display, enter
the Portals• Service Menu System. When any change
is made and then the next / previous item is selected (or
the Sub-Menu is exited), the display will momentarily
flash REQUEST INSTALLED. For details on Earnings,
Standard & Feature Audits, see Section 3, Chapter 3,
GO TO AUDITS MENU. For details on Standard &
Feature Adjustments, see Section 3, Chapter 4, GO
TO ADJUSTMENTS MENU.
Tournament Operation Note:
The use of the Tournament Equipment and/or
running a Tournament is OPTIONAL and to be
used solely in the discretion of the owner.
It is the sole responsibility of the operator to
ensure that this product is used in conformity
with all applicable laws. Stern Pinball, Inc.®
disclaims any such responsibility.
Due to continuing product innovation,
information in this chapter is
subject to change without notice.
For more details on the equipment & hardware required,
Installation and Set-up, read the ToPS• Tournament
Pinball System Kit Installation Manual (SPI Part
Number: 780-6011-00) provided in the Optional
Tournament Kit (SPI Part Number: 500-5011-00), not included with this ToPS • Ready Pinball Game.
The equipment & hardware consists of:
Electronic 7 X 80 Multi-Color Dot Display (secured above the Backbox), Tournament Serial Interface (TSI)
Board (secured in the Backbox), Tournament Button + Lamp (secured onto the Front Molding) and all
necessary wiring, hardware and documentation (which also provides suggestions and Tips for ToPS • ).
To order, contact your local Distributor (view Pages DR. _ & ` in the Find-It-In-Front: Dr. Pinball). You can also
call Technical Support or visit our website (details on the back cover of this manual).
Important: The Coin Door must be OPEN allowing the Memory Protect Switch
to be disabled, so any Tournament changes can be made.
*27272851 $0(1 70(18237, 21 $/86(21/<
After entering Portals• , the MAIN MENU now appears. Select the "TOUR" Icon in the MAIN MENU with
either the Red "LEFT" or Green "RIGHT" Buttons (the Flipper Buttons operates in the same manner)
and press the Black "ENTER" Button (the Start Button operates in the same manner). The
TOURNAMENT MENU appears. Continue through this chapter for the explanation & usage of the Icons in the
TOURNAMENT MENU.
7RXUQDPHQW$GMXVWPHQW$XGLW7DEOHVRQWKHQH[WSDJH
*R7R
7RXUQDPHQW0HQX
6HFWLRQ&KDSWHU
3DJH
6HF7RXUQDPHQW
The Portals Service Menu System provides 6 Steps
necessary to SET-UP, START, MONITOR and END
Pinball Tournaments on your Tournament Pinball System
Ready Pinball Game. OPTIONAL EQUIPMENT &
HARDWARE (SOLD SEPARATELY) ARE REQUIRED
FOR PROPER OPERATION AND USE OF THIS MENU.
72851$0(17
$'-8670(17
7$%/(6
72851$0(17$'- 8670(176 $'-8670(17 1$0(
86$ '()$8/7
$'-8670(17 1$0(
<285 6(77,1*
86$ '()$8/7
CREDITS PER PLAY
02
JACKPOT BASE
$20.00
JACKPOT INCREMENT
$00.50
69
70
71
72
73
74
$'-8670(17 1$0(
<285 6(77,1*
86$ '()$8/7
JACKPOT MAX.
$2,500.00
START DATE
JANUARY 1
END DATE
FEBRUARY 1
75
76
77
<285 6(77,1*
# OF PRIZES
03
PRIZE TYPE
CASH
SHOW PLAYER’S CASH
YES
Note: The above adjustments must be set just before selecting and activating the "STRT" Icon (START TOURNAMENT).
See the following pages for explanation and more details.
6,*10(66$*(6$%$'-8670(176 $'-8670(17 1$0(
86$ '()$8/7
$'-8670(17 1$0(
<285 6(77,1*
86$ '()$8/7
6HF7RXUQDPHQW
LOCATION MESSAGE
ON
78
79
<285 6(77,1*
PRIZE MESSAGE
ON
STARTING METER Reading :
STARTING METER Date (MM/DD/YR) :
AUDITOR’S NAME :
CURRENT METER Reading :
AUDIT Date (MM/DD/YR) :
CPU Version :
CURRENT VOLUME SETTING:
...... ......
......... ..
DISPLAY Version :
...... ......
........
GAME LOCATION NAME :
___________________________________________________________________________________________
___________________________________________________________________________________________
___________________________________________________________________________________________
&RS\ WKLV SDJH IRU )LHOG $XGLW 7UDFNLQJ 3HUIRUPDQFH
___________________________________________________________________________________________
___________________________________________________________________________________________
TOURNAMENT START DATE :
See Adj. 78 & 79 above >>
TOURNAMENT END DATE :
............
72851$0(17$8',77$%/(
72851$0(17$8',76
$XGLW GHILQLWLRQV IROORZ LQ WKLV &KDSWHU
TOTAL PLAYS
TOTAL TOUR. EARNINGS
TOURNAMENT PLAYS
JACKPOT
TOTAL GAME EARNINGS
6HFWLRQ&KDSWHU
3DJH$
ACCUM. TOUR. PLAYS
NET EARNINGS
ACCUM. TOTAL PLAYS
ACCUM. EARNINGS
ACCUM. TOUR EARNINGS
ACCUM. JACKPOT
# TOURNAMENTS
*R7R
7RXUQDPHQW0HQX
7R XU QD P HQW $GM XVW P HQW V To initiate, from the TOURNAMENT MENU, select the "SET UP" Icon with either the Red "LEFT" or
Green "RIGHT" Buttons and press the Black "ENTER" Button. Select and activate either of the ">>"
Mini-Icons to view the next or previous Tournament Adjustment in this group. Select and activate either of
the "-" or "+" Mini-Icons to change the setting, if desired (the Default Setting is noted in the definitions below). The
display will describe the Tournament Adjustment Number, Tournament Adjustment Name and the Current
Tournament Adjustment Setting. The current Tournament Adjustment will remain in the display until the next
Tournament Adjustment is viewed or when this Menu is exited.
IMPORTANT FOR TOURNAMENT USERS: Select the settings carefully. For Tips for ToPS (different
Tournament Sample Set-Ups, etc.), view the ToPS Tournament Pinball System Kit Installation Manual (SPI
Part Number: 780-6011-00) provided in the Optional Tournament Kit (SPI Part Number: 502-5011-00). Before
allowing players to begin after you’ve started a Tournament, double-check the Normal Mono-Color Dot Display
and Top Multi-Color Dot (Beta Brite®) Display to ensure everything you want is displayed correctly. Once a
Tournament is started, no adjustments can be made until you end the Tournament (by selecting the "END" Icon).
Allowing players to qualify, then ending a Tournament prematurely to make corrections will affect the outcome of
the Tournament. View the ToPS Manual for more details.
WARNING: Changes made in any Adjustments will be lost after a FACTORY RESET or removal of the CPU/Sound Board Batteries.
01
02
03
04
05
06
07
08
72851$0(17 $'-8670(17 1$0( 'HILQLWLRQ
CREDITS PER PLAY: Set between 01 - 10. Default is 02.
Set the maximum number of Credits that may be accumulated per game.
JACKPOT BASE: Set between $00.00 - $999,999.00 (increments of $1). Default is $20.00.
Set the initial Prize Pool Amount to be offered for the Tournament. Note: The displays will present the
words "PRIZE POOL" in lieu of the word "JACKPOT".
JACKPOT INCREMENT: Set between $00.00 - $999,999.99 (increments of 1¢). Default is $00.50.
Set the Prize Pool Increment which will increase the Prize Pool Amount with each Tournament Game
played.
JACKPOT MAX.: Set between $00.00 - $999,999.00 (increments of $1). Default is $2,500.00.
Set the maximum cap to be placed on the Prize Pool during a Tournament. Note: The displays will
present the words "PRIZE POOL" in lieu of "JACKPOT".
CURRENT DATE/TIME: Set the current date and time. After setting the Start and End Dates in
Tournament Adjustments 6 & 7, the Tournament will then start automatically*. *Requires the
TIMEKEEPER• IC (included in this kit) installed in Location U212 on the CPU/Sound Board.
START DATE: Set between JANUARY through DECEMBER. Default is JANUARY.
After the month desired is set, a valid day must be set. To Start a Tournament, go back to the
TOURNAMENT MENU and select the "STRT" Icon (see the next page).
END DATE: Set between JANUARY through DECEMBER. Default is FEBRUARY.
After the month desired is set, a valid day must be set. To End a Tournament, go back to the
TOURNAMENT MENU and select the "END" Icon (see the next page).
# OF PRIZES: Set between 01 - 05. Default is 03. Set the maximum number of Prize Positions to be
awarded during a Tournament. Selections (cannot be changed) are as follows:
Set to 01, the Tournament Winner is awarded 100% of the Prize Pool.
Set to 02, the 1st & 2nd place winners are awarded 70% / 30%, respectively.
Set to 03, the 1st, 2nd & 3rd place winners are awarded 50% / 30% / 20%, respectively.
Set to 04, the 1st, 2nd, 3rd & 4th place winners are awarded 50% / 25% / 15% / 10%, respectively.
Set to 05, the 1st, 2nd, 3rd, 4th & 5th place winners are awarded 50% / 20% / 15% / 10% / 5%,
respectively.
PRIZE TYPE: Set to CASH, POINTS, TICKETS or OTHER. Default is CASH.
This adjustment determines how the Prize Pool is to be represented in the Attract Mode on both
the Normal and top Beta-Brite® Displays.
09
Select CASH for the displays to represent the Prize Pool amount (based on Jackpot Base and Max.) in
$Dollars. Select POINTS for the displays to represent the Prize Pool amount in Points. Select TICKETS for
the display to represent the Prize Pool amount in Tickets. Select OTHER NOT TO represent the Prize Pool
amount (if prize(s) to be awarded are not Cash, Points or Tickets).
SHOW PLAYER’S CASH: Set to YES or NO. Default is YES.
10
When set to YES, both the Beta- Brite® Multi-Color Dot Display and the Normal Mono-Color Display
exhibit the Cash amount in the Attract Mode.
*R7R
7RXUQDPHQW0HQX
6HUYLFH*DPH
0DQXDO([WUDFWLRQ
6HFWLRQ&KDSWHU
6HF7RXUQDPHQW
1U
7R XU QD P HQW $GM XVW P HQW V To initiate, from the TOURNAMENT MENU, select the "SET UP" Icon with either the Red "LEFT" or
Green "RIGHT" Buttons and press the Black "ENTER" Button. Select and activate either of the ">>"
Mini-Icons to view the next or previous Tournament Adjustment in this group. Select and activate either of
the "-" or "+" Mini-Icons to change the setting, if desired (the Default Setting is noted in the definitions below). The
display will describe the Tournament Adjustment Number, Tournament Adjustment Name and the Current
Tournament Adjustment Setting. The current Tournament Adjustment will remain in the display until the next
Tournament Adjustment is viewed or when this Menu is exited.
IMPORTANT FOR TOURNAMENT USERS: Select the settings carefully. For Tips for ToPS• (different
Tournament Sample Set-Ups, etc.), view the ToPS• Tournament Pinball System Kit Installation Manual (SPI
Part Number: 780-6011-00) provided in the Optional Tournament Kit (SPI Part Number: 500-5011-00). Before
allowing players to begin after you’ve started a Tournament, double-check the Normal Mono-Color Dot Display
and Top Multi-Color Dot (Beta Brite®) Display to ensure everything you want is displayed correctly. Once a
Tournament is started, no adjustments can be made until you end the Tournament (by selecting the "END" Icon).
Allowing players to qualify, then ending a Tournament prematurely to make corrections will affect the outcome of
the Tournament. View the ToPS • Manual for more details.
7RXUQDPHQW $GMXVWPHQW 1DPH
69
CREDITS PER PLAY
70
JACKPOT BASE
71
JACKPOT INCREMENT
72
JACKPOT MAX.
73
START DATE
74
END DATE
75
# OF PRIZES
7RXUQDPHQW $GMXVWPHQW 'HILQLWLRQ
Set between 01 - 10. Default is 02. Set the maximum number of
Credits that may be accumulated per game.
Set between $00.00 - $999,99.00 (increments of $1). Default is
$20.00. Set the initial Prize Pool Amount to be offered for the
Tournament. Note: The displays will present the words "PRIZE
POOL" in lieu of the word "JACKPOT".
Set between $00.00 - $999,99.99 (increments of 1¢). Default is
$00.50. Set the Prize Pool Increment which will increase the Prize
Pool Amount with each Tournament Game played.
Set between $00.00 - $999,99.00 (increments of $1). Default is
$2,500.00. Set the maximum cap to be placed on the Prize Pool
during a Tournament. Note: The displays will present the words
"PRIZE POOL" in lieu of "JACKPOT".
Set between JANUARY through DECEMBER. Default is JANUARY.
After the month desired is set, a valid day must be set. To Start a
Tournament, go back to the TOURNAMENT MENU and select the
"STRT" Icon (see the next page).
Set to JANUARY through DECEMBER. Default is FEBRUARY. After
the month desired is set a valid day must be set. To end End a
Tournament, go back to the TOURNAMENT MENU and select the
"END" Icon (see the next page).
Set between 01 - 05. Default is 03. Set the maximum number of Prize
Positions to be awarded during a Tournament. Selections (cannot be
changed) are as follows: Set to 01, the Tournament Winner is awarded
100% of the Prize Pool. Set to 02, the 1st & 2nd place winners are
awarded 70% / 30%, respectively. Set to 03, the 1st, 2nd & 3rd place
winners are awarded 50% / 30% / 20%, respectively. Set to 04, the
1st, 2nd, 3rd & 4th place winners are awarded 50% / 25% / 15% /
10%, respectively. Set to 05, the 1st, 2nd, 3rd, 4th & 5th place winners
are awarded 50% / 20% / 15% / 10% / 5%, respectively.
Set to CASH, POINTS, TICKETS or OTHER. Default is CASH.
This adjustment determines how the Prize Pool is to be
represented in the Attract Mode on both the Normal and top
Beta-Brite® Displays.
76
PRIZE TYPE
77
SHOW PLAYER’S CASH
*R7R
7RXUQDPHQW0HQX
Select CASH for the displays to represent the Prize Pool amount (based
on Jackpot Base and Max.) in $Dollars. Select POINTS for the displays
to represent the Prize Pool amount in Points. Select TICKETS for the
display to represent the Prize Pool amount in Tickets. Select OTHER
NOT TO represent the Prize Pool amount (if prize(s) to be awarded are
not Cash, Points or Tickets).
Set to YES or NO. Default is YES. When set to YES, both the BetaBrite® Multi-Color Dot Display and the Normal Mono-Color Display
exhibit the Cash amount in the Attract Mode.
6HFWLRQ&KDSWHU
3DJH%
6HF7RXUQDPHQW
$GM 1ž
6W DU W7RXU QD P HQW V H O H F W R Q O \ D I W H U 6 H W 8 S L V F R P S O H W H G To initiate, from the TOURNAMENT MENU, select the "STRT" Icon with either the Red "LEFT" or Green
"RIGHT" Buttons and press the Black "ENTER" Button. The "START TOURNAMENT?" MENU
appears with the "NO" Mini-Icon flashing.
If Set-Up (Tournament Adjustments) was not
completed OR the Tournament Audits were not
recorded from the prior Tournament, exit this Menu
by activating the "NO" Mini-Icon. If Set-Up was
completed and the Tournament Audits were
recorded, select and activate the "YES" Mini-Icon.
The Pinball Game is set to Tournament Ready
Mode (the Flashing Tournament Button must be depressed for a Tournament Game after the proper credit is
inserted). "REQUEST INSTALLED" is indicated and returns to the TOURNAMENT MENU with the "STRT" Icon
flashing. Note: If the "STRT" Icon appears to be non-functioning, it is because a Tournament is in progress. The
Tournament must first be stopped (select and activate the "END" Icon in the TOURNAMENT MENU).
6 W R S 7R X U QD P H QW V H O H F W R Q O \ D I W H U D 7R X U Q D P H Q W L V V W D U W H G 6HF7RXUQDPHQW
To initiate, from the TOURNAMENT MENU, select the "END" Icon with either the Red "LEFT" or Green
"RIGHT" Buttons and press the Black "ENTER" Button. The "END TOURNAMENT?" MENU appears
with the "NO" Mini-Icon flashing. If the
Tournament was not completed, exit this Menu by
activating the "NO" Mini-Icon. If the Tournament was
completed (the End Date set has passed), select and
activate the "YES" Mini-Icon. The Pinball Game is
taken out of Tournament Ready Mode (to readjust
any Tournament Adjustments, the Tournament must
be "stopped"). "REQUEST INSTALLED" is indicated
and returns to the TOURNAMENT MENU with the "END" Icon flashing. Record your Tournament Audits at this
time as they will be reset (except for the "Accumulative Audits) if another Tournament is started!
7R XU QD P HQW 3U L]HV
To initiate, from the TOURNAMENT MENU, select the "PRIZ" Icon with either the Red "LEFT" or Green
"RIGHT" Buttons and press the Black "ENTER" Button. Select and activate either of the ">>"
Mini-Icons to view the next or previous Leader in this group. The display will describe the Leader
Placement (1st, 2nd, 3rd, 4th & 5th), Leader Name, 4-Digit Pin-Code, and Prize Pool portion for the Current
and Previous Tournaments. The current Leader (and related information) will remain in the display until the next
Leader is chosen or when the Sub-Menu is exited.
7R XU QD PHQW $X GLW V To initiate, from the TOURNAMENT MENU, select the "AUD" Icon with either the Red "LEFT" or Green
"RIGHT" Buttons and press the Black "ENTER" Button. Select and activate either of the ">>" MiniIcons to view the next or previous Tournament Audit in this group. The display will describe the Tournament Audit Number, Tournament Audit Name and the Current Tournament Audit Total (Value). The current
Tournament Audit will remain in the display until the next Tournament Audit is viewed or when this Menu is exited.
IMPORTANT FOR TOURNAMENT USERS: >>>> A L L of the Tournament Audits 140-151 are RESET O N L Y if
a Factory Reset is done (see Section 3, Chapter 6, GO TO RESET MENU). >>>> Tournament Audits 140-145
are RESET ONLY if a new Tournament is started. >>>> Tournament Audits 146-151 are NOT RESET*, they’re
accumulative (totals accumulate since the first Tournament was played). *if no Factory Reset is done.
$XG 1ž
7RXUQDPHQW $XGLW 1DPH
7RXUQDPHQW $XGLW 'HILQLWLRQ
Provides the total number of Regular and Tournament Games played
while a Tournament is active (in progress). This total is derived by
173 TOTAL PLAYS
adding Tournament Audit 174, TOURNAMENT PLAYS, with Regular
Plays.
Provides the total number of Tournament Games played while a
174 TOURNAMENT PLAYS
Tournament is active (in progress).
Provides the total Gross Earnings accepted, while a Tournament is
175 TOTAL GAME EARNINGS
active (in progress).
Provides the total Tournament Earnings (Audit 175 less Regular Game
176 TOTAL TOUR. EARNINGS
Earnings) while a Tournament is active (in progress).
Tournament Audits 177-184 continued on the next page.
6HFWLRQ&KDSWHU
3DJH&
*R7R
7RXUQDPHQW0HQX
7RX UQDPHQW$XGLWV&RQWLQX HG
7RXUQDPHQW $XGLW 1DPH
177
JACKPOT
(PRIZE POOL TOTAL)
178
NET EARNINGS
7RXUQDPHQW $XGLW 'HILQLWLRQ
Provides the total Prize Pool (Jackpot) Amount to be paid out while a
Tournament is active (in progress).
Provides the total Net Earnings (Gross Earnings less Prize Pool) while
a Tournament is active (in progress).
The following Tournament Audits WILL NOT BE RESET if a new Tournament is started. ALL AUDITS can be reset if a Factory Reset is done!
180
181
182
183
184
ACCUM.
TOTAL PLAYS
ACCUM.
TOUR. PLAYS
ACCUM.
EARNINGS
ACCUM.
TOUR EARNINGS
ACCUM.
JACKPOT
# TOURNAMENTS
Provides the accumulative total amount of Regular & Tournament
Games played since the first Tournament was played.
Provides the accumulative total amount of Tournament Games played
since the first Tournament was played.
Provides the total Gross Earnings accepted, since the first Tournament
was played.
Provides the accumulative total Tournament Game Earnings since the
first Tournament was played.
Provides the accumulative total of Prize Pool (Jackpot) Amounts paid
out since the first Tournament was played.
Provides the number of Tournaments (not individual Tournament
Games) since the first Tournament was played.
6L JQ0HVVDJHV$ %7RXU QL H$GM
To initiate, from the TOURNAMENT MENU, select the "A-B TEXT" Icon with either the Red "LEFT" or
Green "RIGHT" Buttons and press the Black "ENTER" Button. Select and activate either of the ">>"
Mini-Icons to view the next or previous Tournament Adjustment in this group. Select and activate either of
the "-" or "+" Mini-Icons to change the setting, if desired (the Default Setting is noted in the definitions below). The
display will describe the Tournament Adjustment Number, Tournament Adjustment Name and the Current
Tournament Adjustment Setting. The current Tournament Adjustment will remain in the display until the next
Tournament Adjustment is viewed or when this Menu is exited.
$GM 1ž
7RXUQDPHQW $GMXVWPHQW 1DPH
78
LOCATION MESSAGE
79
PRIZE MESSAGE
7RXUQDPHQW $GMXVWPHQW 'HILQLWLRQ
Set to ON, CHANGE or OFF. Default is ON. When set to CHANGE, a
new message can be set or the old one can be edited (select the "+"
Mini-Icon to change settings until "CHANGE" appears in the display,
then select the ">>" Mini-Icon to access.). At the top left corner of the
Display, the letter A is indicated (blinking) in the first available position.
Vary the letter(s) by operating the Left and Right Flipper Buttons (or
"RED" or "GREEN" Buttons). With the desired letter indicated,
depress the Start Button to lock in the letter and advance to the next
character. Repeat this procedure until the desired message is
completed in the display. Select the "<" or ">" characters to
back-space (erase) and/or to move forward in an already typed
message. After completion, press the "BLACK" Button, "REQUEST
INSTALLED" is indicated and then exits this sub-menu.
The DEFAULT LOCATION MESSAGE is:
STERN PINBALL PROUDLY PRESENTS...
The DEFAULT PRIZE MESSAGE is:
YOU CAN BE THE NEXT BIG WINNER!
IMPORTANT FOR TOURNAMENT USERS:
2 additional messages can be added by using the Beta Brite® Remote. More details in the ToPS
Tournament Pinball System Kit Installation Manual (SPI Part Number: 780-6011-00) provided in the Optional
Tournament Kit (SPI Part Number: 500-5011-00).
*R7R
7RXUQDPHQW0HQX
6HFWLRQ&KDSWHU
3DJH'
6HF7RXUQDPHQW
179
Yo u r N o t e s
Centerfold
Mechanism
Drop Screen Tease
Mechanism
Mirror Back Panel
Mechanism
Bead Screen
Peek-A-Boo
Rotating Triangle
Mechanism
Magazine
Mechanism
Vertical Up-Kicker
Scoop
Sec. 4: Parts Id. ...
Section 4, Chapter 1
Page 54
Parts Identification
& Location
6HFWLRQ &K DS WHU RI 3DUWV,GHQWLILFDWLRQ/R FDWLRQ
7 KH3LQN3DJHV
2YHU YL HZ
This section provides the Part Nºs and locations of all the components in this pinball machine. The parts are
arranged in three groups: BACKBOX, CABINET & PLAYFIELD. Generic parts which may change as production
continues (quantity and/or size) are listed together. Quantities greater than 0 indicates that the part is used in this
game. Since quantity changes may occur, an item indicating "0" may be used. Compare the item which needs to
be replaced with the drawings provided (the Posts, Sockets, Bulbs & Rubber Rings are drawn actual size). Major
Assemblies & Ramps are detailed in the Blue Pages, Chapter 2. Important: Read all "Take Note:" items.
6HFWLRQ7DEOHRI&RQWHQWV
&KDSWHU7KH3LQN3DJHV
2YHUYLHZ
%$&.%2;
%DFNER[
3/$<%2<%DFNER[$VV\
6SHDNHU3DQHO$VV\IRUWKH
%DFNER[ DQG $VVRF 3DUWV &$%,1(7
*HQHUDO3DUWV6ZLWFKHV
3OD\ILHOG
3/$<),(/'
*HQHUDO3DUWV6ZLWFKHV
%HORZ *HQHUDO3DUWV6ZLWFKHV
$ERYH 5XEEHU3DUWV
3ODVWLFV6FUHHQHG&OHDU
7UDQVOLWHV'HFDOV 5DLOV:LUH)RUPV%DOO*XLGHV
DQG0LVF5DPS 0HWDO3RVWV6FUHZV
DQG1XWV 0HWDO6SDFHUV
3ODVWLF3RVWVDQG6SDFHUV
6PDOO%D\RQHW7\SH%XOEV
DQG6RFNHWV /DUJH%D\RQHW7\SH%XOE
DQG6RFNHWV :HGJH%DVH%XOEV
DQG6RFNHWV &KDSWHU7KH%OXH3DJHV
&DELQHW
3DUWV,GHQWLILFDWLRQ
/RFDWLRQ
2YHUYLHZ
'UDZLQJVIRU0DMRU$VVHPEOLHV
5DPSV 6HFWLRQ&KDSWHU
3DJH
6HF3DUWV,G
6SHDNHU3DQHO'LVSOD\
%DFNER[$VVHPEO\,WHPV
1RWVROGDVDQDVVHPEO\RUGHUWKHLQGLYLGXDOSDUWVDFWXDOO\UHTXLUHG
$3
$
6LGH
9LHZµ
Qty. 2
$3
$
$3
$
$3
$
$3
$
Associated
Parts (AP-)
listed in the
Parts Table on
the next page.
)URQW9LHZ
The Backglass is Not Shown in
this Front View for clarity.
%
$3
%
7DNH1RWH
* An asterisk ( * ) indicates item(s) are not noted in the pictorials.
† When ordering Item 3, CPU/Sound Bd., please specify the
Game Name to receive the board with the correct ROMs.
$3
&
$3
&
Right Side
Pivot Hinge
‡ Item 19, Button Hole Plug (Black) is the Optional Tournament
Header Access Hole. If removing for the Optional Tournament
Header, save with the game.
6HF3DUWV,G
1º
63, 3$57 1º
1º
525-5558-76 10*
Item 1 Note: Black Textured T-Molding is installed and cannot be ordered separately.
11
2 PCB Metal Mounting Plate
1 535-5809-04
12
Item 2 is secured to Item 1 by: #8 X 1/2" HWH AB (Zinc) (Qty. 13) (234-5101-00) and
1
%$&.%2; 3$57 1$0(
Backbox (PLAYBOY)
47<
1
#10 Washer 7/32" I.D. X .5" O.D. X 1/16" Thick (Qty. 4) (242-5003-00)
3 † CPU/Sound Board (Mono) FCC-FEB98
4 Display Power Supply Board
5 I/O Power Driver Board
1
1
1
520-5136-16
520-5138-00
520-5137-01
Items 3, 4 & 5 are secured to Item 2 by: #8-32 X 3/8" HWH MS (Qty. 19) (237-5903-00)
%$&.%2; 3$57 1$0(
47<
Ground Strap (5") (by Item 12)
Starter - Fluorescent (FS2 Light)
Ballast CU45Z-W 1/2" Core 120v 50/60 Hz 13W
Ballast Mounting Plate
13
14
Lock Mounting Plate (2001)
Camlock/Key (N23078A CAM 2K
Fluorescent Light Bracket Assy. Left
1 515-6545-00
ORDERING ABOVE (ITEM 7) SUB-ASSY. PART Nº WILL INCLUDE:
7A
Fluorescent Light Bracket Left
1
535-7739-00
7B
Lamp Holder (Self-Locking)
1
077-5214-00
7C
#6-32 X 5/8" PPH MS (Sems) Zinc
232-5203-00
1
7D
Starter Base (with Leads)
077-5213-00
1
7E
#4-40 X 1/2" PPH MS (Sems) Zinc
2
237-5813-00
7
1
1
535-8128-01
355-5018-02
1
1
355-5006-01
355-5006-02
SF2400)
Items 13-14 are secured by: #8 X 5/8" TP Torx T20 (Qty. 4) (237-5947-00)
Solenoid Expander Board (UK Only)
& Center Up/Down Post Assemblies not supported in the Normal Coil Matrix of Q1-Q32.
63, 3$57 1º
600-5006-05
165-5011-01
010-5015-00
535-8657-00
Item 12 is secured to Item 1 by: #6 X 5/8" HWH AB (Zinc) (Qty. 2) (234-5102-04)
#1 Roto Lock Male (on Cabinet)
520-5192-00 15A #1 Roto Lock Female (R2-0002-02)
15B
Item 6 is required for UK Games Only to support the Left & Right Outlane Ball Deflectors
6
1
1
1
1
Item 15B is secured by: #10-24 X 1-3/4" CBSN (Qty. 2) (231-5022-00), #10-24 Keps Nut
(Qty. 2) (240-5207-00) and #10 Washer 7/32" ID X .5" OD X 1/16" (Qty. 2) (242-5003-00)
16
Back Vent Grill 2-1/2" X 18"
1
545-5072-02
Item 16 is secured by: Staple 5/16" (Qty. 24) (631-5000-00)
17 Fuse Description Decal (Generic)
1 820-6152-01
1 820-6266-00
18 "CAUTION - VERY HOT" Decal
19‡ Button Hole Plug (Blk) (Happ #52-6214-00) 1 500-6566-00
20* Fuse Label (UL)
1 820-6143-00
Ordering Note: If 515-6545-00 is unavailable, order the individual part(s) actually required.
1 820-5091-00
8 Fluorescent Light Bracket Assy. Right 1 515-6545-01 21* Backbox Date Label
1 036-5000-04
22* Ribbon Cable, 20-Pin (4")
ORDERING ABOVE (ITEM 8) SUB-ASSY. PART Nº WILL INCLUDE:
8A
Fluorescent Light Bracket Right
1
535-7739-01
23* Ribbon Cable, 26-Pin (40")
1 036-5001-40
8B-8C Identical to Items 7B-7C above.
See 7B-7C
24* 1/4" Clamp (Double)
3 040-5000-23
Items 7 & 8 are secured by: #10-24 X 1-1/4" Carriage Bolt Sq. Neck (Qty. 2/per)
(231-5012-00), #10-24 Keps Nut (Qty. 2/per) (240-5207-00) and 3/4" X 3" Reinforced
25* 1/2" Clamp (Single)
1 040-5000-06
Strapping Tape (Qty. 1, Sold in 12" Lengths only) (626-5040-00)
3/4" Clamp (Single)
2 040-5000-08
26
*
Ordering Note: If 515-6545-01 is unavailable, order the individual part(s) actually required.
27* 1" Clamp (Single)
6 040-5000-09
Fluorescent
Tube
24"
(F18T8CW)
9
1 165-5061-00 Items 24-27 are secured to Item 1 by: #8 X 1/2" HWH AB (Zinc) (Qty. 13) (234-5101-00)
6HFWLRQ&KDSWHU
3DJH
3DUWV,GHQWLILFDWLRQ
/RFDWLRQ
6SHDNHU3DQHO$VV\IRUWKH%DFNER[,WHPV
DQG$VVRF3DUWV%DFNJODVV$VVHPEO\3LYRW+LQJHV/HIW5LJKW,WHPV$3 $$3&
1RWVROGDVDQDVVHPEO\RUGHUWKHLQGLYLGXDOSDUWVDFWXDOO\UHTXLUHG
Qty. 2
Qty. 2
7DNH1RWH
* An asterisk ( * ) indicates
item(s) are not noted in
the pictorials.
)URQW9LHZ
(Broken View)
$3
%
$3
&
1. Ordering the complete
Speaker Panel Assembly,
515-6888-03 (Items 1-15)
will include all hardware.
6LGH9LHZ/DLG'RZQ
For clarity, the below drawing does not show the speaker(s).
For Securing Hardware, see the Parts Table below, under Item 6.
For Securing Hardware, see the Parts Table below, under Item 4.
For Securing Hardware, see the Parts Table below, under Item 3.
1º
1
2
63($.(5 3$1(/ 3$57 1$0(
Speaker Panel (Black Wood)
Dot Matrix Disp. Bd. Mounting Bracket
47<
1
2
63, 3$57 1º
525-5515-00
535-8368-01
1º
15
,1',9,'8$/ 3$57 1$0(
47<
Plastic Shield (Display Cover)
1
63, 3$57 1º
545-5884-00
Item 15 is secured to Item 2 by: #6 X 3/8" HWH AB (Zinc) (Qty. 8) (234-5000-00)
Item 2 is secured to Item 1 by: #8 X 3/4" HWH AB (Zinc) (Qty. 4/per) (234-5103-00)
3
Dot Matrix Display Board 128 X 32
1
520-5052-00
Item 3 is secured to Item 2 by (at corners): 3/16" X 3/8" Spacer Gray (Qty. 4)
(254-5000-18) and #6-32 X 1/2" HWH Swage (Serr) Zinc (Qty. 4) (237-5976-03)
Item 3 is secured to Item 4 (at the top center) by: 3/4" X 1/4" Hex Spacer #6-32 Tap
(Qty. 1) (254-5008-04) and #6-32 X 1/4" PPH MS (Sems) Zinc (Qty. 1) (232-5200-00)
4
Static Shield (Steel Plate)
1
535-6437-00
Item 4 is secured to Item 2 by: 1/2" X 1/4" Hex Spacer #6-32 Tap (Qty. 4) (254-5008-03)
and #6-32 X 1/2" PPH MS (Sems) Zinc (Qty. 2, on Left Side only) (232-5202-00)
5*
6
Edge Protector (on Item 4)
Display Controller Board FCC-FEB98
2
1
545-5592-01
520-5055-03
Item 6 is secured to Item 4 by: 1/2" X 5/16" X .144 ID Spacer Tap (Qty. 3) (254-5014-00),
#6-32 X 3/4" PPH MS (Sems) Zinc (Qty. 3) (237-5504-00), 1/2" X 1/4" Hex Spacer #6-32 Tap.
(Qty. 1) (254-5008-03) and #6-32 X 1/4" PPH MS (Sems) Zinc (Qty. 2) (232-5200-00)
7
RF Shield
1
820-5092-00
Item 7 is secured inbetween: "Item 6" and its’ mounting hardware described.
8* Ground Strap (25") (on Items 4, 6, 12)
9* 1/2" Clamp (Single) (on Item 4)
10* Ribbon Cable, 14-Pin
4
1
1
11* Foam 3/16" Thk. X 1/4" X 36"
6
600-5006-25
040-5000-06
036-5260-00
Item 10 Note: The 14-Pin cable connects the Dot Matrix Disp. Bd. to the Disp. Controller Bd.
626-5026-00
Above Item 11 is self-adhesive. Located between Items 3 & 17. Sold in 12" Lengths only.
12
13
14
Speaker (Shld.) 4" 8: MG Elec #4060SH
Speaker Grill (Black w/no Artwork)
Speaker Panel Hook Bracket
2
2
2
031-5004-01
535-8081-01
535-7009-02
Items 12, 13 & 14 are secured by: #8 X 3/4" HWH AB (Zinc) (Items 12/13: Qty. 4/per;
Item 14: Qty. 2/per) (234-5103-00)
3DUWV,GHQWLILFDWLRQ
/RFDWLRQ
The Associated Parts AP-A thru AP-C are also noted in the Backbox
Assembly drawings on the previous page.
ASSOC. PARTS ARE NOT INCLUDED WITH BACKBOX/SPKR. PANEL ASSY’S.
1º
$662& %$&.%2; 3$57 1$0(
47< 63, 3$57 1ºº
1 See Parts Below
AP-A Backglass Assembly (Game Nº 76)
ORDER ONLY INDIVIDUAL PART(S) NEEDED:
AP-A1 Clear Backglass 25.906" X 19.187"
1
660-5038-02
AP-A2 Playboy Film Art w/Hologram (#76)
1
515-7252-76
NOTE: The Playboy Backglass Film Art must have the Official
Playboy Hologram Logo affixed. It cannot be displayed without it!
AP-A3 Top Plastic Channel - 26"
1
545-5018-15
AP-A4 Bottom Plastic Lift Channel - 26-1/16" 1
545-5021-01
AP-A5 Plastic Edging (Left/Right) - 18-1/8"
545-5018-14
2
AP-A6* Tape (double-sided) (12" Length)
626-5005-00
1
(only 6" required)
Note: AP-A6 secures AP-A3--A5 to AP-A1
1 535-7999-00
AP-B Pivot Hinge Left
1 535-7999-01
AP-C Pivot Hinge Right
Items AP-B & AP-C are secured to Backbox by: 1/4"-20 X 1-1/4" C.B. Sq. Neck (Qty. 4)
(231-5003-00), 1/4"-20 Flange Nut (Qty. 4) (240-5300-00) and
Fend Washer 1/4" I.D. X 1" O.D. (Qty. 1) (242-5009-00)
Items AP-B & AP-C are secured to Cabinet by: 1/4"-20 X 7/8" Carriage Bolt Sq. Neck
(Qty. 2) (231-5014-00), Hinge Spacer (Qty. 2) (530-5099-00), Washer 1/4" I.D. X 7/8" O.D. X
1/8" Yellow (Qty. 1/per) (242-5016-01), Fend Washer 1/4" I.D. X 1" O.D. (Qty. 1/per)
(242-5009-00) and 1/4"-20 Flange Nut (Qty. 1/per) (240-5300-00)
Note: Inside cabinet holes are covered by BLACK MYLAR COVER DISCS (QTY. 2)
(820-5041-00) to hide securing hardware (AP-B & AP-C above) from player view.
6HFWLRQ&KDSWHU
3DJH
6HF3DUWV,G
Red
Green
&DELQHW*HQHUDO3DUWVJ6ZLWFKHVF
Black
)RU%DFNER[3DUWVVHHWKH
SUHYLRXVWZRSDJHV
%
Qty. 2
(QODUJHG
9LHZ RI ,WHP LQVLGH WKH
&RLQ 'RRU ,WHP )RU XVDJH VHH 6HFWLRQ &KDSWHU 3RUWDOV 6HUYLFH 0HQX ,QWUR 3J 7DNH1RWH
$
‡ Item 11, Button Hole Plug (Blk)
is the Optional Tournie Button
Access Hole. If removing
for the Optional Tournament Button, save
with the game.
9LHZ RI WKH EDFN RI WKH &DELQHW ZLWK WKH %DFNER[ LQ WKH GRZQ SRVLWLRQ
Qty. 2
,WHP LV VWDSOHG RQ WKH LQVLGH EDFN ZDOO DQG WKH LQVLGH ERWWRP RI WKH FDELQHW
'
9LHZ RI
WKH &RLQ
'RRU
2SHQ
,WHP $
%
&
Qty. 4
-
6HF3DUWV,G
,WHP - 2Q2II
6ZLWFK LV ORFDWHG
XQGHU WKH &DELQHW
)URQW 5LJKW GLUHFWO\
EHORZ WKH 3RZHU %R[
1º &$%,1(7 3$57 1$0(
&
7DNH1RWH
* An asterisk ( * ) indicates item(s)
are not noted in the pictorials.
J
Legend Note: Items noted with a
black square
are General Parts.
Items noted with a white square
are Switches.
Qty. 2
1º &$%,1(7 3$57 1$0(
525-6000-76 12* P/F Glass (Tmprd.) 21" X 43" X 3/16"
500-5921-50 13 Hex Key Allen Wrench 5/16"
Item 2 is secured by: Leg Bolt Back Plate (535-5703-00) and Leg Bolt 3/8" X 16 X 2-1/2"
14 Corrugated Tubing Black 11e4"ø X 2.6’ Lg.
Hex 5/8" Hd. (2/per) (231-5001-01) To order just a Leg Leveler (3/8" - 16 X 3") use SPI Nº:
1
2
Qty. 2
Game Nº 76 Screened Cabinet (Plain)
Black Leg & Leveler Assembly
47< 63, 3$57 1º
1
4
F
47< 63, 3$57 1º
1
1
2
660-5001-00
777-0001-00
605-5008-00
500-5017-00. A Leg "without" a Leg Leveler is not available.
Above Item 14 covers the Cables Wiring Harnesses going into the Backbox from the Cab.
Start Button Assembly ("Flipper" Style)
Item 3 includes the Switch. FOR SWITCH ONLY see Item 25 on the Next Page.
15A #1 Roto Lock Male (R2-0055-02)
15B #1 Roto Lock Female (on Backbox)
3*
4
Ball Shooter (Plunger) Assembly
0
Not Used
1
500-6146-00-04
Item 4 is secured by: Support Plate (Qty. 1) (535-5027-00), #10-32 X 3/8" SHWH (Serr)
Swage (Qty. 3) (237-5985-00) and #6 X 5/8" HWH AB (Zinc) (Qty. 2) (234-5002-00).
FOR A BREAKDOWN OF PARTS SEE: Sec. 4, Chp. 2, Drawings for ... Assemblies...
5
1"ø Button (Red) + Lamp (#555 WB)
1
500-6388-02
Item 5 includes the Switch. FOR SWITCH ONLY see Item 25 on the Next Page.
6
Flipper Button (Red) Assembly
2
500-5026-32
Item 6 is secured by: Pal Nut for Flipper Button (Metal) (Qty. 2) (240-5003-01) and
is fitted with: O-Ring 11/32" X 7/32" X 1/16" (Qty. 1/per) (545-5850-00) Item 6 DOES NOT
include the Switch. FOR SWITCHES ONLY see Items 23A/B on the Next Page.
7
8
9
Rear Glass Channel 20-3/8" Length
Plastic Channel 42-5/8" Lg. (Lt. & Rt.)
Side Armor "with holes" (Lt. & Rt.)
1
2
2
545-5038-00
545-5017-00
535-7297-02
Item 9 is secured by: #10-24 X 1" Carriage Bolt Sq. Neck (2/per) (231-5021-00),
#10-24 Hex Nut (2/per) (240-5202-00) and #8 X 5/8" PPH Black (2/per) (232-5101-01)
10
Front Molding - Black
1
500-5757-02-00
Item 10 requires: Self-Adhesive Foam Rubber 3/8" X 3/16" X 20-3/8" (626-5001-00).
11‡ Button Hole Plug (Blk) (Happ #52-6214-00)
6HFWLRQ&KDSWHU
3DJH
1
500-6566-00
1
1
355-5006-01
355-5006-02
Item 15A is secured by: #10-24 X 1-3/4" Carr. Bolt Sq. Neck (Qty. 2) (231-5022-00),
#10-24 Nylon Stop Nut (Qty. 2) (240-5206-00) and #10 Washer 7/32" X .5" X 1/16" (Qty. 2)
(242-5003-00)
16
Coin Door (with Validator) USA only
1
500-5018-172
Item 16 is secured by: 1/4"-20 X 1-1/4" Carriage Bolt Sq. Neck (Qty. 4) (231-5003-00)
1/4"-20 Flange Nut (Qty. 4) (240-5300-00) and Fend Washer 1/4" I.D. X 1" O.D. (Qty. 3)
(242-5009-00) NOTE: For Coin Door other than USA call Technical Support for SPI Part Nº.
17
18
Coin Door Switch (USA)
FYI: Coin Door Switch ( ¥ Japan)
Diagnostics Service Switches (X3)
2
0
1
180-5024-00
180-5091-00
180-5012-03
Item 18 is secured to Coin Door by: Diagnostics Sw. Bracket (Qty. 1) (535-6860-01)
Slam Tilt Sw. (No Longer Required)
0
Not Used
Dual Switch Assembly
1 500-5808-00
ORDERING ABOVE (ITEM 20) ASSEMBLY PART Nº WILL INCLUDE:
20A Mounting Bracket
1
535-6958-00
20B Playfield Power Interlock Sw. (Top)
1
180-5136-00
20C Memory Protect Switch (Bottom)
1
180-5000-01
19
20
Item 20 is secured to Cabinet by: #8 X 1/2" HWH AB (Zinc) (Qty. 2) (234-5101-00)
Parts Table & Views continue on the next page.
3DUWV,GHQWLILFDWLRQ
/RFDWLRQ
&DELQHW*HQHUDO3DUWVJ6ZLWFKHVF&RQWLQXHG
*
+
6SHDNHU 3DQHO 'LVSOD\ LQ WKH %DFNER[
(QODUJHG 9LHZ RI 3RZHU %R[ &DELQHW %RWWRP ,QVLGH )URQW 5LJKW
$
(QODUJHG 9LHZ RI WKH
3OXPE %RE 7LOW 6ZLWFK
Qty. 2
$
$
%
9LHZ RI &DELQHW
,QVLGH )URQW /HIW
&
6HH 3UHYLRXV
3DJH IRU
2SHQ 9LHZ
RI &RLQ 'RRU
'
7KXPE6FUHZ LQFOXGHG
ZLWK 7LOW 3OXPE %RE RQO\
Qty. 2
%
9LHZ RI &DELQHW
,QVLGH )URQW 5LJKW
6HUYLFH *DPH 0DQXDO
6HH )URQW &RYHU IRU
63, 3DUW 1XPEHU
%
%
6HH
(QODUJHG
9LHZ /HIW
$
6ZLWFK 'LRGH
1
63, 1ž
LQ SURWHFWLYH
WXELQJ
%
$
'
% Qty. 10
& Qty. 10
.
6HH
(QODUJHG
9LHZ
&
$
7DNH1RWH
An asterisk ( * ) indicates item(s) are not noted in the pictorials.
*
F
J
1º ,1',9,'8$/ 3$57 1$0(
47< 63, 3$57 1º
Parts Table & Views continue on the previous page.
21 Front Molding Lockdown Assembly
1
500-6509-00
Item 21 is secured by: #10-24 X 1-1/4" Carr. Bolt (Qty. 2) (231-5012-00), #10-24 Keps Nut
(Qty. 2) (240-5207-00), #8 X 5/8" HWH AB Zinc (Qty. 4) (234-5102-04) and
#10 Washer 7/32" ID X 1/2" OD X 1/16" (Qty. 2) (242-5003-00)
22
23A
23B
24*
25
26
27
27A
27B
27C
27D
Lockdown Spring (connected to handle)
1 265-5008-00
Flipper Switch - Self-Cleaning
2 180-5160-00
Flipper Sw. - X2 Stack for Lwr./Upr. Flipper(s) 0
180-5164-00
Foam Strip (2 on 23A; 1 on 23B)
3 626-5042-00
Start Button Switch (ONLY)
1 180-5174-00
Grills 2-1/2" X 18" (on Back & Bottom)
2 545-5072-02
Cabinet Plumb Bob Tilt Switch
1 See Parts Below
ORDER ONLY INDIVIDUAL PART(S) NEEDED:
1
535-5221-00
Bracket for Hanger Wire
1
Hanger Wire
535-5319-00
Contact Wire Form
1
535-7563-01
Plumb Bob Weight (includes Thumb-Screw) 1
535-5029-00
Items 27A & 27C are secured by: #8 X 1/2" HWH AB (Zinc) (Qty. 4) (234-5101-00)
28A Slide & Pivot Support Bracket - Right
28B Slide & Pivot Support Bracket - Left
1
1
535-5990-00
535-5989-00
Items 28A & 28B are secured by: #10-24 X 1-1/4" Carriage Bolt Sq. Neck (3/per)
(231-5012-00) and #10-24 KEPS Nut (3/per) (240-5207-00)
29
Prop Rod
1
535-7553-00
Item 29 is secured by: #10-24 X 1-3/4" Carriage Bolt Sq. Neck (Qty. 1) (231-5022-00),
Washer #10 7/32" ID X .5" OD X 1/16" Thk (Qty. 1) (242-5003-00) and
#10-24 Nylon Stop Nut (Qty. 1) (240-5206-00)
30
Transformer 5.7v AC (with Ballast Winding)
1
010-5012-01
Item 30 is secured by: 1/4"-20 X 5/8" PPH MS (Zinc) (Qty. 4) (237-5854-00) and
1/4" Split Lock Washer (Qty. 4) (244-5000-00)
31
Speaker 8" ø Rd. 8010 4:
3DUWV,GHQWLILFDWLRQ
/RFDWLRQ
1
031-5007-00
1º
32
,1',9,'8$/ 3$57 1$0(
47< 63, 3$57 1º
Speaker Grill 7" X 7"
1
545-5072-03
Items 31 & 32 are secured by: #6-32 X 1-1/4" Fin Shank Screw (Qty. 4) (237-5883-00) and
#6-32 Keps Nut (Qty. 4) (240-5008-00)
33 Power Input Box Sub-Assy.
1 515-5360-07
ORDERING ABOVE (ITEM 33) SUB-ASSY. PART Nº WILL INCLUDE:
1
535-5932-00
33A Power Box (Plain)
1
180-5008-01
33B Service Outlet (for USA)
1
034-5000-10
33C Line Cord 10’ ROJ 3" Max.
1
545-5122-00
33D Recessed Cup for Line Cord
1
150-5000-00
33E* Line Filter
1
150-5001-00
33F* Varistor TNR159211KM
200-5000-05
33G Fuse 8 Amp 250v Slo-Blo (Domestic) 1
1
205-5001-00
33H Fuse Holder
1
33I* On/Off Switch Bracket
535-8318-00
1
180-5001-01
33J On/Off Rocker Sw. (Arcolectric C1350AB)
1
820-6123-03
33K Power Box Decal
34 Cash Box Plastic Bottom
1 545-5090-00
35 Cash Box Cover (Validator)
1 535-5013-03
1 535-7562-00
36 Cash Box Lock Bracket (wire)
37 Large Hair-Pin Clip
1 535-7772-00
38 Cabinet Light Bd. Assy. PLAYBOY
1 500-6558-00
ORDERING ABOVE (ITEM 38) ASSEMBLY PART Nº WILL INCLUDE:
38A Cabinet Light Board Plain (Generic)
1
525-5609-00
38B 2-Lug Staple Down Socket
10
077-5000-00
38C #44 Bulb Yellow (Small Bayonet Type)
10
165-5053-06
from 820-6305-XX
38D Decal "-10" of Playboy Decal Set
1
Note: Individual Decals from a Decal Set cannot be ordered separately.
Item 38B is secured to Item 38A by: Staple (5/16") (Qty. 2/per) (631-5000-00)
Item 38 is secured to the Cabinet by: #8-32 X 1 " HWH MS (Ser) Zinc (Qty. 2)
(237-5946-00) and #8 Washer (Qty. 2) (242-5005-00)
Ordering Note: If 500-6558-00 is unavailable, order the individual part(s) actually required.
6HFWLRQ&KDSWHU
3DJH
6HF3DUWV,G
are General
Legend Note: Items noted with a black square
Parts. Items noted with a white square
are Switches.
3OD\ILHOG*HQHUDO3DUWVJ6ZLWFKHVF%HORZ
1º %(/2: 3/$<),(/' 3$57 1$0( 47< 63, 3$57 1º
1
Playfield Support Slide Bracket
2
535-6862-02
Item 1 is secured by: #8 X 1/2" HWH AB (Zinc) (Qty. 2/per) (234-5101-00) and
#8-32 X 5/8" HWH Swage (Serr) Zinc (Qty. 1/per) (237-5975-03)
2
Edge Slide Bracket (Extended)
2
535-5988-01
Item 2 is secured by: #4 X 1/2" PFH (Zinc) (Qty. 5/per) (237-5840-00)
3
4
Pivot Pin Bracket Welded Assembly
Switch Bracket (Shooter Lane / Eject Hole)
2
2
5
1
1
535-6452-00
535-6896-00
Item 5 requires: Foam Pad (Qty. 1) (626-5029-00) on Target Bracket.
6
7
Insulation Fiche Paper (under Lwr. Flips)
Gate Bracket (Rt.) Assy. (see next page)
2
1
545-5721-00
500-6515-00
%
Item 7 is secured by: #8 X 1/2" HWH AB (Zinc) (Qty. 2/per) (234-5101-00)
8*
Diode Terminal Strip 2-Lug (810) Isolated
0
055-5203-00
However, Item 8 (Qty. 1) is located in the Cabinet on the Coin Door.
9 Diode Terminal Strip 3-Lug (813) Isolated
10 Diode Terminal Strip 5-Lug (824) Isolated
11* Diode Terminal Strip 7-Lug Isolated
1
8
0
%
L
1
/
1
.
%
L
L
055-5204-03
055-5204-05
055-5204-07
/
.
Item 4 is secured by: #6 X 1/2" HWH AB (Zinc) Red (Qty. 2/per) (234-5001-02)
Switch Back Plate (Stand-Up Target)
Target (Stand-Up) Bracket
/
500-5329-03
535-6173-00
&
%
L
Items 9-10 are secured by: #6 X 3/8 HWH AB Zinc (Qty. 1-2/per) (234-5000-00).
Note: 1N4004 Diodes (112-5003-00) are used in all Diode applications. 1N4001 Diodes
can be used for Switches and/or Lamps. See Sec. 5, Chp. 2, Playfield Diode Terminal Strip...
12
3A 250v Slo-Blo Fuse
Fuse Clip Holder (Socket)
2
2
200-5000-08
205-5000-01
Item 12 is secured by: #6 X 1/2" PPH AB (Qty. 1/per) (237-5805-00)
Note: Item 12, Fuse Clip Holder (Socket) 205-5000-01 is part of a set of 12 (205-5000-12).
You can order them as individuals (...-01) or a set of 12 (...-12).
13* Diode Terminal Strip/Fuse Decals A-I
1
'
820-6221-76
Note: For Decal Descriptions & Locations, see Sec. 5, Chp. 2, Playfield Wiring, Page 101.
14* #8 Solder Lug
0
055-5140-08
*
However, Item 14 (Qty. 4) is located in the Cabinet on the Coin Door & Power Box.
Micro Sw. Roll-Over Left Brkt. Assy.
Micro Sw. Roll-Over Right Brkt. Assy.
1
10
Micro Switch (at Shooter Lane)
Micro Sw. (Heavy Duty "Y" Flat Actuator)
Micro Switch (Long Flat+Bent End Actuator)
1
1
1
%
180-5157-00
180-5116-01
180-5186-00
Switch & Target Assy. Narrow (Red)
1
515-5967-02
6HF3DUWV,G
Item F is secured by: #8 X 1/2" HWH AB (Zinc) (Qty. 2) (234-5101-00)
For better view or entire assembly, see Appendix I, (end of manual).
G
Modular S-U Target Square (Clear)
1
Micro Switch (on Pop Bumpers)
Stack (Blade) Switch (on Slingshots)
Micro Switch (Roller Actuator, Reg. Force)
3
4
2
+
500-6139-01R
$
K
L
M
2
3
180-5149-00
180-5119-02
180-5158-00
N
Dual OPTO TRANS Bd. (on Ball Trough)
520-5173-00
520-5174-00
Dual OPTO REC Board (on Ball Trough)
Note: For more details on Item N and a break-down of parts, see Section 5, Chapter 4,
Printed Circuit Boards, Page 105. For how Item N is secured or for a better view, see
Section 4, Chapter 2, Drawings for Major Assemblies & Ramps, Page 73.
O
Relay PC Board w/Solderd Harness
1
DC Relay (Bi-Directional) PC Board
1
-
%
%
(
3
4W\ 7DNH1RWH
*
An asterisk ( * ) indicates item(s) are not noted in the pictorials.
1.
For Sockets & Bulbs (drawings & part numbers) see Pgs. 68-70.
520-5010-00-76 2. Some items or parts may be included with or associated with a
520-5066-00
Item P is secured by: #6 X 3/4" HWH AB (Zinc) (Qty. 4) (234-5003-00) and
3/8" Slf. Rtn. Spacer White (Qty. 4) (254-5007-01)
6HFWLRQ&KDSWHU
3DJH
%
%
Item O is secured by: #6 X 3/4" HWH AB (Zinc) (Qty. 4) (234-5003-00) and
3/8" Slf. Rtn. Spacer White (Qty. 4) (254-5007-01) Note: To order the Relay Board without
the Soldered Harness (036-5161-00) attached, use 520-5010-00.
P
4W\ Note: For how Items H-M are secured or for a better view, see Section 4, Chapter 2,
Drawings for Major Assemblies & Ramps, on the indivual assemblies noted above.
1º %(/2: 0,6& 3&% 3$57 1$0( 47< 63, 3$57 1º
+
180-5015-03
180-5054-00
180-5119-00
Note: For how Item J can be replaced with 180-5119-02 if -00 is no longer available.
EOS Switch Flipper (on Flippers)
Micro Sw. (Roller Actuator, Lite Force)
Micro Switch (on Drop Target)
0
Item G is secured by: #8 X 3/4" HWH AB (Zinc) (Qty. 2) (234-5103-00)
For better view or alternate colors, see Appendix I, (end of manual).
H
i
J
2
+
Items C-E require a Switch Body Protect Plate (535-6539-00) which is secured by:
#2-56 X 1/2" HWH Serr (Qty. 2) (237-5937-02) and #2-56 Hex Nut (Qty. 2) (240-5301-00).
F
%
500-6227-01
500-6227-02
Items A & B are secured by: #8 X 1/2" HWH AB (Zinc) (Qty. 2/per) (234-5101-00)
C
D
E
)
1º %(/2: 6:,7&+(6 3$57 1$0( 47< 63, 3$57 1º
A
B
3.
Major Assembly or Ramp Assembly; see the Blue Pages,
Sec. 4, Chp. 2. for parts required not appearing on this page. If
you still cannot find the part required, Call Stern• Pinball
Technical Support, 1-800-542-5377 or 1-708-345-7700 (Opt. 1).
Legend Note: Items noted with a black square
are General
Parts. Items noted with a white square
are Switches, OPTO
Boards, or Misc. PC Boards.
F
J
3DUWV,GHQWLILFDWLRQ
/RFDWLRQ
3OD\ILHOG*HQHUDO3DUWVJ6ZLWFKHVF$ERYH
1º $%29( 3/$<),(/' 3$57 1$0( 47< 63, 3$57 1º
%
P/F Screened w/ Inserts & NO Parts
&OHDU
PF P/F Complete w/ Inserts & ALL Parts
1 Playfield Hanger Bracket
%
Arch Retaining (Hold-Down) Brackets
2
%
Bottom Arch (Black Metal) w/o Forks
Level Assembly
4
'
8QGHU 535-8392-01
1
515-7214-00
Instruction Card (USA) Playboy
5
1
755-5176-10
Note: Visit www.sternpinball.com for a PDF copy of the Game Instruction Card which will
also have any translated Instruction Cards made for this game. Find Game Link or Archives.
Spanish 755-5176-02; German 755-5176-13; Italian 755-5176-14; French 755-5176-15.
6A
&
&
&
1
For Individual Items use : .882" 8MM Vial Mtg. Flange (545-6027-00), Level .8mm Empire
#0224 (545-6001-01) or Level Bracket (535-9010-00). Flange secured by: #6-32 X 1/4"
PPH MS (no Sems) Zinc (Qty. 1) (237-5500-00) and #6-32 Keps Nut (Qty. 1) (240-5008-00)
Item 4 is secured to the wood rail by: #6 X 1/2" HWH AB Zinc Red (Qty. 2) (234-5001-02)
$
4W\ 535-8394-00
Item 3 is secured to the playfield by: #10-32 X 5/16" PH FL U/C MS STL Zinc (Qty. 2)
(237-6013-00). Usage Note: 535-8392-01 is used on games with a Ball Shooter Plunger;
535-8392-00 is used on games with an Auto Launch Button. When replacing the Bottom
Arch, order new replacement Nelson Protect Strips (not included) (Qty. 2) (545-5212-02)
Note: Item 3 doesn’t include Decals. For Decals, see Playfield - Plastics & Decals, Page 63.
$
2
Item 2 is secured to the Playfield by: #8 X 1/2" HWH AB (Zinc) (Qty. 3/per) (234-5101-00)
3
830-5176-00
505-6004-76-76
535-8385-00
Item 1 is secured to the P/F by: #8-32 X 7/8" HWH MS Zinc (Qty. 2/per) (237-5890-00)
&OHDU
%
1
1
2
Coin Card (2-Sided) New for 2002
1
755-5400-00
Note: This New Style Coin Card supercedes 755-5087-01/-05 which is no longer available.
Usage Note: Use Item 6A (Back: 1 Play 50¢ - 5 Plays $2) for Adj. 6, Game Pricing, USA 5
Setting, or (Front: 1 Play 50¢ - 3 Plays $1) for Adj. 6, Game Pricing, USA 8 Setting.
6B
$
Coin Card (2-Sided) New for 2002
1
755-5400-02
Note: This New Style Coin Card supercedes 755-5087-01 which are no longer available.
Usage Note: Use Item 6C (Front: 1 Play 50¢) for Adj. 6, Game Pricing, USA 2-7 Setting,
(Back: is Blank) for Custom Settings.
Availability: See Appendix J at the back of this manual for more or optional Coin Cards
(USA, Canada, Euro & other International) available through your distributor or download
via our website www.sternpinball.com/coinagecards.htm (PDF Format). Coin Cards
provided with this game depends on where the game was originally shipped from the factory.
7
Gate Bracket (Right) Assembly
1
500-6515-00
Includes: Bracket RT (535-8977-00), RT Flap (535-8979-00), Hinge Pin RT (535-8982-00)
and Nylon Washer (#90295A010) .065" ID X .179: OD X .078" (242-5069-00)
Item 7 is secured under the Playfield by: #8 X 1/2" HWH AB (Zinc) (Qty. 2) (234-5101-00)
8
9
10
Pinball (Steel) 1" ø
1-Way Gate Mounting Bracket (Large)
Wire Gate (for above)
Roll-Under Gate & Switch Assembly
4
1
1
2
260-5000-00
535-9079-00
535-8441-01
515-7206-00
For Individual Items use : Roll-Under Switch Mounting Bracket (Black) (535-9041-00),
Wire Gate (535-9043-48) and Micro Switch (180-5190-28).
11
Cross-Under Gate & Switch Assembly
13
14
15
1
535-9138-00
Light Reflector (Silver Plastic)
Mini-Mars Light Cover (Snap-In) Clear
Mini-Mars Light Cover (Snap-In) Red
Mini-Mars Light Cover (Snap-In) Blue
5 545-5409-01
2 550-5030-01
1 550-5030-02
1 550-5030-05
For Light Socket & Bulbs, see Page 70.
VUK Exit Scoop, Playboy Bunny
1 535-9097-01
Item 15 is secured by: #8-32 X 1" HWH (Zinc) (Qty. 2) (237-6003-00)
16 Back Panel Black Wood (No Parts)
17* Plug-Cap (3/16") Black Plastic
1
1
525-5608-00
545-5232-01
Note: Item 17 should plug hole if a Center Post (@ Drain) is used, then removed.
1º $%29( 6:,7&+(6 3$57 1$0( 47< 63, 3$57 1º
3)
Micro Switch (Short Flat Actuator)
Item A requires a Switch Body Protect Plate (Qty. 1/ea.) (535-6539-00) which is secured
by: #2-56 X 1/2" HWH Sr (Qty. 2) (237-5937-02) and #2-56 Hex Nut (Qty. 2) (240-5301-00).
A
B
C
D
%
4
3
2
180-5190-48
180-5119-02
180-5189-00
7DNH1RWH
%
1.
$
2.
3DUWV,GHQWLILFDWLRQ
/RFDWLRQ
180-5190-28
Items B-D are secured by: #2-56 X 1/2" HWH Serr (Qty. 2) (237-5937-02)
EDFN
VLGH RI
6HH $SSHQGL[ - DW WKH EDFN
RI WKLV PDQXDO IRU 2SWLRQDO
&DUGV 86$ &DQDGD (XUR ,QWHUQDWLRQDO DYDLODEOH
WKURXJK \RXU GLVWULEXWRU RU
GRZQORDG YLD RXU ZHEVLWH
Micro Switch (Long Flat Actuator)
Micro Switch (Roller Actuator, Lite Force)
Micro Switch (Short Flat/Mid Bend Actuator)
3
Some items or parts may be included with or associated with a
Major Assembly or Ramp Assembly; see the Blue Pages,
Sec. 4, Chp. 2. for parts required not appearing on this page. If
you still cannot find the part required, Call Stern• Pinball
Technical Support, 1-800-542-5377 or 1-708-345-7700 (Opt. 1).
are General
Legend Note: Items noted with a black square
Parts. Items noted with a white square
are Switches.
F
J
6HFWLRQ&KDSWHU
3DJH
6HF3DUWV,G
%OXH
515-7231-00
Bracket, Dual Light Mounting (No Parts)
Item 12 is secured to Clear Plastic -69 by: #6-32 X 3/8" PPH MS (Sems) Zinc (Qty. 2)
(232-5201-00) onto 2" X 1/4" Hex Spacer #6-32 Tap (Qty. 1/per) (254-5008-07)
12
5HG
3
For Individual Items use : Roll-Under Switch Mounting Bracket (Black) (535-9077-00)
and Micro Switch (180-5190-48).
Item 11 is secured by: #8-32 X 3/8" HWH Swage (Ser) Zinc (Qty. 2/per) (237-5975-00)
,'
e ,'
e ,'
e ,'
GRHV QRW H[LVW
How to measure:
Lay ring over circle of
closest size. If you see the
outside edge of the circle, move
to 1 ring smaller. With the correct
size, the inside edge of the circle will
be seen within the inside edge of the
Rubber Ring.
Note: The rings will s t r e t c h with
use. Always go to the size smaller.
(I.D. = Inside Diameter ø;
O.D. = Outside Diameter ø)
,'
+
+
+
237,21$/
237,21$/
e ,'
1º 58%%(5 3$57 1$0(
,'
Small Flipper BLACK Rubber Ring
Large Flipper BLACK Rubber Ring
Rubber Bumper (Deflector Pad)
Rubber Bumper (Grommet)
Rubber Bumper (Post)
Rubber Bumper (Flange)
Rubber Bumper (Post Sleeve, Short)
Rubber Bumper (Post Sleeve, Tall)
3" I.D. BLACK Rubber Ring
23e4" I.D. BLACK Rubber Ring
21e2" I.D. BLACK Rubber Ring
6HFWLRQ&KDSWHU
3DJH
%
e
47< 63, 3$57 1º
0
2
2
3
0
0
0
11
0
0
2
545-5207-00
545-5277-00
545-5428-00
545-5105-00
545-5009-00
545-5965-00
545-5151-00
545-5308-00
,'
1º
4
5
6
7
8
9
10
11
12
545-5348-10 13*
545-5348-20 14*
545-5348-09
%
,' ,'
58%%(5 3$57 1$0(
2" I.D. BLACK Rubber Ring
13e4" I.D. BLACK Rubber Ring
11e2" I.D. BLACK Rubber Ring
11e4" I.D. BLACK Rubber Ring
1" I.D. BLACK Rubber Ring
3e " I.D. BLACK Rubber Ring
4
5/ " I.D. BLACK Rubber Ring
16
3/ " I.D. BLACK Rubber Ring
16
7/ " O.D. BLACK Rubber Ring
16
3e " O.D. BLACK Rubber Ring
8
O-Ring 11/32" X 7/32" X 1/16" (on Flip Button)
2' 2'
47< 63, 3$57 1º
1
0
0
1
1
2
5*
9
2
11
2
545-5348-08
545-5348-21
545-5348-07
545-5348-06
545-5348-05
545-5348-04
545-5348-02
545-5348-01
545-5348-17
545-5348-19
545-5850-00
3DUWV,GHQWLILFDWLRQ
/RFDWLRQ
‘ 4W\ DUH QRW XVHG LQ WKLV JDPH
e ,'
† ,WHPV ZLWK
6HF3DUWV,G
2XWVLGH
(GJH
1
2
3
+
*
e ,'
A
B
C*
D*
E
F
G
H
+
+
7DNH1RWH
An asterisk ( * ) indicates item(s) are not
noted in the pictorials;
This page shows Rubber
Parts on the Playfield only
For Rubber Parts on any
assemblies, see the Blue
Pages, Sec. 4, Chp. 2.
+
+
,QVLGH
(GJH
Items 1-9 have the
"size" molded onto
the Rubber Ring.
+
6L]H DQGRU TXDQWLWLHV PD\ FKDQJH GXULQJ SURGXFWLRQ
3OD\ILHOG5XEEHU3DUWVJF5LQJV$FWXDO6L]H†
3OD\ILHOG3ODVWLFV6FUHHQHG&OHDU3KRWR,QVHUWV'HFDOV1RW6KRZQ
3/$<%2< 3/$67,&6 3$57 1$0(
63, 3$57 1º
Screened Plastic Set -01 thru -28
1 830-5988-XX
(Not Used: -14, -15, -20, -21 -24)
Clear Plastic Set -50 thru 70
1 830-5989-XX
(Not Used: -58)
Attention: Individual Plastic Pieces are not available.
The entire Plastic Sheet Set must be ordered.
7DNH1RWH
1.
2.
To order the entire Plastic Sheet Set (Screened &/or
Clear), use the above Part Nº with the "-XX" ending.
The following Plastics require riveting, if replaced:
-27 (Left Ramp Sign), and -65 (X2), -66 & -67 (Magazine Assembly), see the Blue Pages (Section 4,
Chapter 2, Drawings for ... Assemblies & Ramps)
for securing hardware.
3. -GA (Key Fob) is provided for
collecting (Not Used on game).
4. If Clear Plastic -60 (Lamp
Board in the Peek-A-Boo Assy.)
requires replacement, mark the
socket and the corresponding
hole with numbers as to not
mix up the lamps. See Pages
22-23 to verify that the Lamps
were put back in the correct
order per the Lamp Matrix.
REPLACING TRANSLITES:
To replace the Translites,
match the "T#" on the Clear
Plastics with the T# on the
Translites.
Screws securing the Clear
Plastics together merely need
to be loosened, not removed.
This game was provided with
two (2) additional sets of
different Models & poses.
3·%2< 0,5525
63, 3$57 1º
3+272 ,16(576
63, 3$57 1º
3/$<%2< '(&$/6
63, 3$57 1º
Plastic Mirror
820-6297-00
* Photo Inserts
830-5654-XX
* Photo Inserts Kit
502-5010-00
Attention: Individual Pieces are not
available. The entire Set must be ordered.
Using the Kit Part Number will include the
Instruction Placement Sheet.
* Decal Set
820-6305-XX
Attention: Individual Decals are not
available. The entire Set must be ordered.
-01 Portals; -02 SPI Tech Spt; -03 Install 4 Balls;
-04 Bubble Level; -05 Shooter Lane; -06 SPI Coin Door;
-07 Center Up/Down Post (required for UK Only);
-08 / -09 Flipper Bats; -10 Cabinet Light Board;
-11 Arch Left; -12 Arch Center; -13 Arch Right;
-14 Magazine Inst.; -15 Skill Shot on Gate;
-16 /-18 Lt. & Bot. Pops; -17 Right Pop;
-19 White Panel Cover Up; -20 Drop Target;
-T4 X3 Text Side affixed to back of T4 Translite;
-T6 X3 Bunny Logo Side affixed to back of T6 Translite.
3DUWV,GHQWLILFDWLRQ
/RFDWLRQ
237,21$/ 0</$5
63, 3$57 1º
Optional Clear Playfield Set
(Not Included with game)
820-5095-00
6HFWLRQ&KDSWHU
3DJH
6HF3DUWV,G
Example: If replacing the
picture on one side of the
Triangle Mechanism, between
Clear Plastics -53 & -54, note
it has "T3" listed next to the
2-Digits. Find the matching
shape Translite with "T3" and
swap the pictures.
3OD\ILHOG5DLOVJ:LUH)RUPV%DOO*XLGHVFDQG0LVF5DPSJ†
1º
:22' 5$,/ 3$57 1$0(
47<
1
2
Wood Rail 38" (Left Side Playfield)
Wood Rail (Right Side Playfield)
1
1
63, 3$57 1º
525-5007-03
525-5607-00
Items 1 & 2 are secured by: #6 X 1-1/4" PFH A (Zinc) (Qty. 5/per) (237-5804-00)
$
1º
3
4
5
6
7
8
0(7$/ 5$,/ 3$57 1$0(
Metal Rail (Center Drain under Arch)
Metal Rail (Full Orbit Loop)
Metal Rail (Left of Drop Target/Center Ramp)
Metal Rail (Right of Center Ramp)
Metal Rail (Left of Middle Lane, Right Ramp)
Metal Rail (Right of Right Ramp Enter)
47<
63, 3$57 1º
1
1
1
1
1
1
535-8393-00
535-8954-00
535-8958-00
535-8955-00
535-8957-00
535-9116-00
+
*
L
Items 3-8 are secured at Tabs by: #8 X 1/2" HWH AB (Zc.) (Qty. 1/per tab) (234-5101-00)
)
.
1º
:,5( )250 3$57 1$0(
A
B
Snubber Wire (Left of Eject Hole)
Wire Form 3" (Left of Shooter Lane Ramp)
47<
1
1
63, 3$57 1º
535-5373-02
535-5300-02
(
%
Items A-B are secured by the ends tapped into the playfield. Take care if removing.
C
Wire Form (on Ball Guide Rail)
2
535-5642-00
Item C is secured at the top "loop" with the top screw of Item D below.
1º
3/$67,& %$// *8,'( 3$57 1$0( 47<
D
Plastic Ball Guide (Return Lane)
2
63, 3$57 1º
550-5307-01
Item D is secured by: #6-32 X 3/4" PPH MS (Zinc) (Qty. 4/per) (237-5511-00)
6HF3DUWV,G
1º
0(7$/ %$// *8,'( 3$57 1$0( 47<
E
F
G
H
i
J
Metal Ball Guide (Bottom Pop Exit Lane)
Metal Ball Guide (Left Orbit, Lower)
Metal Ball Guide (Left Orbit, Upper)
Metal Ball Guide (Under Eject Hole)
Metal Ball Guide (Right of Center Ramp)
Metal Ball Guide (Upper Right Orbit)
1
1
1
1
1
1
&
63, 3$57 1º
535-8959-00
535-8960-00
535-8962-00
535-9075-00
535-9098-00
535-9099-00
&
'
'
Items E-J are secured by the ends tapped into the playfield. Take care if removing.
1º
0,6& 5$03 3$57 1$0(
K
Shooter Lane Ramp
47<
1
63, 3$57 1º
535-9051-00
Item K is secured by: #4 X 1/2" PFH (Zinc) (Qty. 2) (237-5840-00)
6HFWLRQ&KDSWHU
3DJH
3DUWV,GHQWLILFDWLRQ
/RFDWLRQ
3OD\ILHOG0HWDO3RVWV6FUHZVDQG1XWV$FWXDO6L]H†
Top
Thread
Item 1 Post can use
3/16" I.D. Rubber Ring,
545-5348-01;
or if Item 1 Post is
used in pairs, can use
3/4" — 3" Rubber Rings.
Top
Top
Top
Thread
Thread
Top
Thread
Thread
Thread
Top
Thread
Tap
Thread
Tap
No
Tap
Bottom
Bottom
Top
Items 2 & 4 Posts can use
7/16" O.D. Rubber Ring,
545-5348-17.
Top
Thread
Items 11-14 Posts can use a
Post Rubber Sleeve (Tall),
545-5308-00.
Thread
Bottom
Thread
Bottom
Bottom
Thread
Thread
Bottom
Bottom
Bottom
Bottom
Thread
Thread
Thread
Thread
Nut Note: All nuts shown with a " " are used in this game. The quantities (not specified) vary.
The remaining Items listed are not used in this game and are noted for reference only (used in prior games).
Bottom
Bottom
Thread
Thread
Bottom
Shown Below~
#6-32
Nylon Stop Nut:
240-5005-00
Shown Below~
#6-32
KEPS Nut
(with Star Washer):
240-5008-00
Shown Below~
#6-32
Hex Nut
(No Star Washer):
240-5004-00
Shown Below~
#6-32
T-Nut:
240-5002-00
Shown Below~
1e4" X 20
Flange Nut:
240-5300-00
Thread
Item 16 is typically used to hold Hex
Spacers onto the Playfield Top.
†
,WHPV ZLWK D =HUR 4W\ DUH QRW XVHG LQ WKLV JDPH
6L]H DQGRU TXDQWLWLHV PD\ FKDQJH GXULQJ SURGXFWLRQ
Item 17 is typically used to hold the
bottom Cabinet Speaker (used with
#6-32 Nylon Stop Nut, 240-5005-00).
Bottom
Thread
Item 18 is typically used to hold Item
15 (515-5939-00) in Turbo Bumper
Assy., 515-6459-04.
Note: The "Fins" keep the screw
from turning inside the wood hole.
1º 0(7$/ 3267 1$0(
1
2
3
4
5
6
7
8
9
Stand-Off Double Groove Post 1"
Mini-Post Wood Screw
Mini-Post Wood Screw (no cut-away)
Mini-Post Mach. Screw / #10-32 Bot.
Post Fasten #6-32 Top / #8-32 Bot.
Post Fasten #8-32 Top / #6-32 Bot.
Post Fasten #6-32 Top / #6-32 Bot.
Post Fstn. #6-32 Top / Wood Scr. Bot.
Post #6-32 Top / Wood Screw Bottom
3DUWV,GHQWLILFDWLRQ
/RFDWLRQ
Top & Side Views
Bottom & Side Views
Top View
Bottom & Side Views
Top & Side Views
Nylon Stop Nuts
Not Shown:
KEPS Nuts
Not Shown:
Hex Nuts
Not Shown:
T-Nuts
Not Shown:
Miscellaneous Nuts
Not Shown:
#6-32
(w/ 1e4" Hex Body):
240-5010-00
#8-32:
240-5102-00
#10-32:
240-5203-00
#10-24:
240-5206-00
#4-40:
240-5303-00
#4-40
(18/8 Stainless):
240-5303-01
5/16"-18:
240-5316-00
#6-32
(w/ 1e4" Hex Body):
240-5011-00
#8-32:
240-5104-00
#10-32:
240-5208-00
#10-24:
240-5207-00
#4-40:
240-5318-00
#8-32:
240-5103-00
#10-32:
240-5201-00
#10-24:
240-5202-00
#10-32 X 3e8":
240-5209-00
3e4-16:
240-5315-00
#2-56:
240-5301-00
7e8"-14:
240-5317-00
#6-32
(w/Side Cut Off):
240-5002-01
#8-32:
240-5101-00
#10-32
(Black Oxide):
240-5007-00
#10-32
(w/Side Cut Off):
240-5205-00
#10-24:
240-5200-00
Plastic Pal Nut
(on Flipper Buttons):
240-5003-00
Metal Pal Nut
(on Flipper Buttons):
240-5003-01
#6-32 Wing Nut:
240-5001-00
#8-32 Wing Nut:
240-5100-00
1e4"-20 Wing Nut:
240-5302-00
1e4"-20 Toggle Wing:
240-5324-00
47< 63, 3$57 1º 1º 0(7$/ 3267 1$0(
0
0
3
6
0
2
19
6
0
530-5102-01
530-5004-00
530-5004-01
530-5005-00
530-5007-00
530-5008-00
530-5012-02
530-5010-02
530-5263-01
10
11
12
13
14
15
Post #6-32 Tap / #6-32 Bottom
Post Hex Base #6-32 Tap/#10-32 Bot.
Post Hex Base (No Tap)/#10-32 Bot.
Post Hex Base #8-32 Top/#10-32 Bot.
Post Hex Base #6-32 Top/#10-32 Bot.
Playfield Support #8-32 Top/Bottom
16
17
18
#6-32 X 3/4" Fin Shank Screw
#6-32 X 1 " Fin Shank Screw
#6-32 X 13/16" Spirol Fin Shank Screw
47< 63, 3$57 1º
0
4
4
0
2
0
530-5127-00
530-5332-01
530-5332-00
530-5332-02
530-5332-03
530-5285-00
0
4
9
237-5921-02
237-5883-00
237-5957-00
6HFWLRQ&KDSWHU
3DJH
6HF3DUWV,G
3OD\ILHOG0HWDO6SDFHUV$FWXDO6L]H†
Hex Spacers:
A Standard USA 9 Inch Ruler
is provided on the back cover.
Tap
%
e
$
H[DPSOHRI%V
$
7DNH1RWH
e
e
e
e
e
e
e
e
e
e
e
e
e
‡ Hex Spacers
Not Used
in current
games may
no longer be
available.
Choose one
size up or
down (+/-)
and compensate with
washers.
e
e
e
e
Items 1-33 are 1e4" wide. Items 35-46 are5/16" wide. With Items 1-3A, 4A, 5 & 6A (the tap
goes thru the length of spacer. With Items 7, 8A, 9-33 & 41-46, the tap is up to 5e8" deep
on each end. Note: Items 3B, 4B, 6B (Not Shown) & 8B (Shown as example of all "B"
Styles) have 1 Male End #6-32 Thread, the other end is Female, identical to Items 7-33.
e
e
e
6HF3DUWV,G
e
0(7$/ 63$&(5 1$0(
1e "
4
3e "
8
1e "
2
X 1e4" Hex Spacer #6-32 Tap
X 1e4" Hex Spacer #6-32 Tap
X 1e4" Hex Spacer #6-32 Tap
Same as 3A but with Male End #6-32
5e "
X 1e4" Hex Spacer #6-32 Tap
8
Same as 4A but with Male End #6-32
3e "
X 1e4" Hex Spacer #6-32 Tap
4
7e "
1e " Hex Spacer #6-32 Tap
X
8
4
Same as 6A but with Male End #6-32
1
1"
X e4" Hex Spacer #6-32 Tap
11e8" X 1e4" Hex Spacer #6-32 Tap
Same as 8A but with Male End #6-32
11e4" X 1e4" Hex Spacer #6-32 Tap
15/16" X 1e4" Hex Spacer #6-32 Tap
13e8" X 1e4" Hex Spacer #6-32 Tap
11e2" X 1e4" Hex Spacer #6-32 Tap
15e8" X 1e4" Hex Spacer #6-32 Tap
13e4" X 1e4" Hex Spacer #6-32 Tap
17e8" X 1e4" Hex Spacer #6-32 Tap
2"
X 1e4" Hex Spacer #6-32 Tap
21e8" X 1e4" Hex Spacer #6-32 Tap
21e4" X 1e4" Hex Spacer #6-32 Tap
23e8" X 1e4" Hex Spacer #6-32 Tap
21e2" X 1e4" Hex Spacer #6-32 Tap
25e8" X 1e4" Hex Spacer #6-32 Tap
6HFWLRQ&KDSWHU
3DJH
47<
0
0
7
0
2
0
1
0
0
0
1
0
0
0
0
0
0
0
0
2
0
0
0
0
0
e
e
e
e
e
Note the Part Nº & Material Difference
e
e
e
1
2
3A
3B
4A
4B*
5
6A
6B*
7
8A
8B
9
10
11 ‡
12
13 ‡
14
15 ‡
16
17
18
19
20
21
e
e
e
e
e
1º
e
$
e
e
63, 3$57 1º
1º
0(7$/ 63$&(5 1$0(
254-5008-00 22 23e4" X 1e4" Hex Spacer #6-32 Tap
254-5008-12 23 27e8" X 1e4" Hex Spacer #6-32 Tap
X 1e4" Hex Spacer #6-32 Tap
254-5008-03 24 3"
254-5024-03 25 31e8" X 1e4" Hex Spacer #6-32 Tap
254-5008-02 26 31e4" X 1e4" Hex Spacer #6-32 Tap
254-5024-02 27 31e2" X 1e4" Hex Spacer #6-32 Tap
254-5008-04 28 35e8" X 1e4" Hex Spacer #6-32 Tap
254-5008-05 29 33e4" X 1e4" Hex Spacer #6-32 Tap
X 1e4" Hex Spacer #6-32 Tap
254-5024-05 30 4"
254-5008-06 31 41e4" X 1e4" Hex Spacer #6-32 Tap
254-5008-17 32 43e8" X 1e4" Hex Spacer #6-32 Tap
254-5024-17 33* 51e4" X 1e4" Hex Spacer #6-32 Tap
254-5008-11 34 3e8" X 1e2" Spacer (Used with Backbox)
254-5008-34 35 1e4" X 5/16" X .144" I.D. Spacer Tap
254-5008-33 36 1e2" X 5/16" X .144" I.D. Spacer Tap
254-5008-09 37 9/16"X 5/16" X .144" I.D. Spacer Tap
254-5008-13 38 3e4" X 5/16" X .144" I.D. Spacer Tap
254-5008-10 39 11e8" X 5/16" X .144" I.D. Spacer Tap
254-5008-20 40 1" X 5/16" X .144" I.D. Spacer Tap
254-5008-07 41 11e4" X 5/16" Hex Spacer #6-32 Tap
254-5008-32 42 13e4" X 5/16" Hex Spacer #6-32 Tap
X 5/16" Hex Spacer #6-32 Tap
254-5008-18 43 2"
5/16" Hex Spacer #6-32 Tap
4"
X
254-5008-28 44
254-5008-16 45 45/16" X 5/16" Hex Spacer #6-32 Tap
254-5008-08 46 4.92" X 5/16" Hex Spacer #6-32 Tap
47<
1
0
0
0
0
0
0
0
0
0
0
0
2
1
3
0
0
0
0
0
0
0
0
0
0
63, 3$57 1º
254-5008-15
254-5008-31
254-5008-14
254-5008-19
254-5008-26
254-5008-27
254-5008-25
254-5008-36
254-5008-21
254-5008-30
254-5008-29
254-5008-35
530-5099-00
254-5014-03
254-5014-00
254-5014-04
254-5014-01
254-5014-02
254-5001-00
254-5018-09
254-5018-06
254-5018-07
254-5018-03
254-5018-00
254-5018-04
3DUWV,GHQWLILFDWLRQ
/RFDWLRQ
,WHPV ZLWK D =HUR 4W\ DUH QRW XVHG LQ WKLV JDPH
$
e
6L]H DQGRU TXDQWLWLHV PD\ FKDQJH GXULQJ SURGXFWLRQ
e
†
e
3OD\ILHOG3ODVWLF3RVWVDQG6SDFHUV$FWXDO6L]H†
3$ 5 7 & 2 / 2 5 & + $ 5 7
1º &RORU
1º &RORU
-06
-07
-08
-09
-10
-11
Yellow
Orange
White
Purple
Fluor. Orange
Fluor. Green
‡
‡
‡ WKUX GLPHQVLRQ LV
PHDVXUHG IURP
WKLV SRLQW
e
e
e
e
‡ Items 5 through 8 (Board Spacers) dimensions
are measured from bottom to just under cutaway (see pictorial with Item 8 above).
** Items 1, 2 & 4 come in various colors (may not be available in every
color). Item 3 is currently only available in the color stated in this game
manual (other colors used in prior games may no longer be available).
The "-XX" in Part Nºs which may come in various colors should be
replaced with the desired 2-Digit Nº. corresponding to the color desired.
Some colors may no longer be available for desired item.
‡
‡
Fluor. Blue
Teal Green
Gray
Luminescent
Gold
-12
-13
-14
-15
-16
e
e
e e e 7DNH1RWH
If any one of Items 10-21 Spacers is not available in the size required, order the smaller
sized spacers required to stack sizes together until appropriate size is achieved
(e.g. If 11e8" is needed but unavailable, order a 1e2" + 5e8" & stack to = 11e8").
†
,WHPV ZLWK D =HUR 4W\ DUH QRW XVHG LQ WKLV JDPH
6L]H DQGRU TXDQWLWLHV PD\ FKDQJH GXULQJ SURGXFWLRQ
e
e
e
e
1º 3/$67,& 326763$&(5 1$0(
1** Top Lane Mini-Light Hood (Red)
e
e
47< 63, 3$57 1º
3
550-5061-02
Item 1 typically secured by: #6-32 X 1-3/4" PPH MS (Zinc) (Qty. 2/per) (237-5511-00) and
Washer 9/64" X 5/16" OD X 1/32" (Qty. 2/per) (242-5017-00)
2** Mini-Jewel Post Clear
0
550-5052-01
Item 2 typically secured by: #6 X 3/8" HWH AB (Zinc) (Qty. 1/per) (234-5000-00)
11/16" Single Groove Post (Black)
3**
4** Single Groove Jewel Post (Clear)
46
11
550-5059-00
550-5034-01
Items 3 & 4 typically secured by: Post Fastening Screw #6-32 Top / #6-32 Bottom
(Qty. 1/per) (530-5012-02, Item 7 Page 59)
1e " Slf. Rtn. Spacer White
4
3e " Slf. Rtn. Spacer White
8
5e " Slf. Rtn. Spacer White
8
3e " Slf. Rtn. Spacer White
4
1e " X 1e " Spacer White (Narrow)
2
4
5‡
6‡
7‡
8‡
9
3DUWV,GHQWLILFDWLRQ
/RFDWLRQ
0
4
0
0
0
254-5007-02
254-5007-01
254-5007-00
254-5007-03
254-5000-03
1º
10
11
12
13
14
15
16
17
18
19
20
21
e
3/$67,& 326763$&(5 1$0(
1e "
8
3/ "
16
1e "
4
3e "
8
1e "
2
5e "
8
3e "
4
7e "
8
X 3e8" Spacer Gray
X 3e8" Spacer Gray (4 for Dot Display)
X 3e8" Spacer Gray
X 3e8" Spacer Gray
X 3e8" Spacer Gray
X 3e8" Spacer Gray
X 3e8" Spacer Gray
X 3e8" Spacer Gray
1" X 3e8" Spacer Gray/Black
11e8" X 3e8" Spacer Gray
11e4" X 3e8" Spacer Gray
11e2" X 3e8" Spacer Gray
47< 63, 3$57 1º
0
6
0
17
0
0
5
0
0
0
0
3
254-5000-19
254-5000-18
254-5000-02
254-5000-12
254-5000-01
254-5000-14
254-5000-07
254-5000-11
254-5000-04
254-5000-06
254-5000-05
254-5000-08
6HFWLRQ&KDSWHU
3DJH
6HF3DUWV,G
Black
Clear
Red
Amber
Green
Blue
can use a Post Rubber Sleeve (Short),
545-5151-00
can use 3/16"
Rubber Rings,
545-5348-01
-00
-01
-02
-03
-04
-05
9DULRXV
&RORUV
Items 3-4 Posts used in pairs can use 3e4" through 3" Rubber Rings,
(See Rubber Parts for Part Nºs).
7DNH1RWH
3 / $ 6 7 , &
1º &RORU
**
/LPLWHG
&RORUV
can use 5/16"
Rubber Rings,
545-5348-02
**
9DULRXV
&RORUV
can use 3/16"
Rubber Rings,
545-5348-01
**
9DULRXV
&RORUV
can use 5/16"
Rubber Rings,
545-5348-02
**
3OD\ILHOG6PDOO%D\RQHW7\SH%XOEVDQG6RFNHWV$FWXDO6L]H†
$PEHU
$
%
%OXH
&OHDU
<HOORZ
6HF3DUWV,G
1º 60$// %8/% 62&.(7 1$0( 47< 63, 3$57 1º
A
A
A
A
A
B
1
2
3
4
5
6
7
8
9
10
#44 Bulb (Clear)
#44 Bulb (Red)
#44 Bulb (Amber)
#44 Bulb (Blue)
#44 Bulb (Yellow)
#455 Twinkle Bulb
2-Lug Staple Down Socket
3-Lug Stand-Up Short Socket
2-Lug Stand-Up Short Socket
3-Lug Staple Down Socket
2-Lug Laydown Socket
3-Lug Stand-Up Long Socket
3-Lug Laydown Socket (3 Lugs Flat)
2-Lug Stand-Up Long Socket
3-Lug Stand-Up Long Shell Socket
2-Lug Stand-Up Lg. Shell Socket (GIs)
6HFWLRQ&KDSWHU
3DJH
30
0
0
0
10
0
13
0
4
0
0
0
1
0
0
22
165-5000-44
165-5053-02
165-5053-03
165-5053-05
165-5053-06
165-5003-00
077-5000-00
077-5008-00
077-5002-00
077-5001-00
077-5003-00
077-5009-00
077-5006-00
077-5005-00
077-5013-00
077-5031-00
1º
11
12
60$// %8/% 62&.(7 1$0( 47< 63, 3$57 1º
1-Lug Stand-Up Long Shell Socket
3-Lug Laydown Socket (2 Lugs Bent)
0
0
077-5012-00
077-5032-00
3DUWV,GHQWLILFDWLRQ
/RFDWLRQ
,WHPV ZLWK D =HUR 4W\ DUH QRW XVHG LQ WKLV JDPH
%XOE
6L]H DQGRU TXDQWLWLHV PD\ FKDQJH GXULQJ SURGXFWLRQ
%XOEV
†
5HG
3OD\ILHOG/DUJH%D\RQHW7\SH%XOEDQG6RFNHWV$FWXDO6L]H†
&
%XOE
70775111s.pcx
†
,WHPV ZLWK D =HUR 4W\ DUH QRW XVHG LQ WKLV JDPH
6L]H DQGRU TXDQWLWLHV PD\ FKDQJH GXULQJ SURGXFWLRQ
6HF3DUWV,G
70775112s.pcx
1º /$5*( %8/% 62&.(7 1$0( 47< 63, 3$57 1º 1º /$5*( %8/% 62&.(7 1$0( 47< 63, 3$57 1º
C
1
2
3
#89 Bulb
Laydown Standard Socket
2-Lug Stand-Up Short Socket
2-Lug Stand-Up Long Socket
3DUWV,GHQWLILFDWLRQ
/RFDWLRQ
2
0
0
1
165-5000-89
077-5100-00
077-5101-00
077-5102-00
4
5
6
Stand-Up Socket Rev. Short
2-Lug Stand-Up Small Socket
Straight Leg Socket
0
1
0
077-5103-00
077-5106-00
077-5107-00
6HFWLRQ&KDSWHU
3DJH
3OD\ILHOG:HGJH%DVH%XOEVDQG6RFNHWV$FWXDO6L]H†
*UHHQ
$PEHU
'
%OXH
<HOORZ
%XOEV
%OXH
&OHDU
&OHDU
5HG
(
5HG
%XOEV
<HOORZ
DE7RS9LHZE6LGH9LHZLV1RW6KRZQ
7DNH6SHFLDO1RWH
DE
D
5/16"
4.
5.
ELV
<HOORZ
ZLWK1R
'LRGH
squeeze
D
DRQO\
Note: Always replace with same type bulb in original application.
1º :('*( %8/% 62&.(7 1$0( 47< 63, 3$57 1º 1º :('*( %8/% 62&.(7 1$0( 47< 63, 3$57 1º
D
D
D
D
D
E
E
E
E
E
#555 Wedge Base Bulb (Clear)
#555 Wedge Base Bulb (Red)
#555 Wedge Base Bulb (Green)
#555 Wedge Base Bulb (Blue)
#555 Wedge Base Bulb (Yellow)
#906 Wedge Base Bulb (Clear)
#906 Wedge Base Bulb (Red)
#906 Wedge Base Bulb (Amber)
#906 Wedge Base Bulb (Blue)
#906 Wedge Base Bulb (Yellow)
6HFWLRQ&KDSWHU
3DJH
79
1
0
0
1
9
0
0
0
0
165-5002-00 1
165-5054-02 2
165-5054-04 3
165-5054-05 4
165-5054-06 5
165-5004-00 6
165-5004-02 7a
165-5004-03 7b
165-5004-05 8a
165-5004-06 8b*
9a*
#555 Wedge Base Socket (Laydown)
#555 Wedge Base Socket (Offset)
#555 W.B. Socket (for Pop Bumper)
#555 W.B. Socket (Solder Type)
#555 Wedge Base Socket (Twist)
#906 Wedge Base Socket (Twist)
#555 IDC Snap-On Socket
#555 IDC Snap-On Socket No Diode
5/16" Ht. Snap-On Socket Bracket
19/32" Ht. Snap-On Socket Bracket
Clear Plastic Socket Mtg. Bd. (4/per)
13
2
3
0
0
0
59
13
57
0
1
077-5026-01
077-5029-00
077-5206-00
077-5207-00
077-5007-00
077-5016-00
077-5216-00
077-5216-01
545-5760-18
545-5760-19
(830-5989-XX)
3DUWV,GHQWLILFDWLRQ
/RFDWLRQ
,WHPV ZLWK D =HUR 4W\ DUH QRW XVHG LQ WKLV JDPH
3.
Item 3 Socket has 2 Wires attached are approximately 12" ea.
Item 4 Socket was used on PC Light Boards to position bulbs
horizontally; Item 4 Socket is secured by soldering into place.
Item 5 Socket was used on PC Light Boards to position bulbs
vertically; Item 5 Socket is secured by "twisting" into place.
Item E Bulb (#906) is normally used in conjunction with Item 6
Socket, but can be used with Items 1, 2, 4 or 7a/b.
Item 7a Socket is equipped with a built-in Diode, 1N4003
(112-5003-00), however, replacement can be made with a
1N4001 Diode (112-5001-00).
Item 7b Socket is NOT equipped with a diode (not required).
6L]H DQGRU TXDQWLWLHV PD\ FKDQJH GXULQJ SURGXFWLRQ
* An asterisk ( * ) indicates item(s) are not noted in the pictorials.
†
6HF3DUWV,G
Just squeeze the "side arms" of
the socket together and pull away
from the bracket or mounting
board for easy Bulb replacement.
7DNH1RWH
1.
2.
Item 7a is an IDC (Insulation
Displacement Connection) Style
Socket (this style is solderless).
This socket is secured to the
playfield or component by Items
8a or 8b Snap-On Socket
Brackets, or may also be snapped
into Item 9 Socket Mounting
Plastic Board (used only when
sockets are positioned closely together or in a special application).
6HFWLRQ & KD SW H U R I 'UDZLQJVIRU0DMRU$VVHPEOLHV5DP SV
7K H % O XH 3D J H V
2YHU YL HZ
6HF'UDZLQJV
Drawings are provided for the Major Assemblies in this game with individual parts of each assembly numbered.
Items noted with a white circle
are mounted above the playfield; items noted with a black circle
are mounted
below. All numbered parts describe the NAME, QUANTITY & PART Nº. ASSOCIATED PARTS (AP-) are noted
and/or viewed with the associated Major Assembly. Important: Read all "Take Note:" items.
'UDZLQJVIRU0DMRU
$VVHPEOLHV5DPSV
6HFWLRQ&KDSWHU
3DJH
%DOO6KRRWHU3OXQJHU$VVHPEO\,WHPV
0DQXDOO\ODXQFKWKHEDOOLQWRSOD\
47< 63, 3$57 1º
1º ,1',9,'8$/ 3$57 1$0(
1
Housing (Shooter Assembly)
1
535-5067-02
Item 1 is secured to the Cabinet by: Support Plate (Qty. 1) (535-5027-00), #10-32 X 1/2"
PPH (Sems) Zinc TF (Qty. 3) (237-6033-00), #10 Split Lock Washer (Qty. 3) (234-5003-00)
and #6 X 5/8" HWH AB (Zinc) (Qty. 2) (234-5002-00)
2
3
Rod Assembly (w/Black Knob)
Comp. (Return) Spring (GRN, .035" ø)
1
1
515-6557-00
266-5001-04
1º ,1',9,'8$/ 3$57 1$0(
4
5
6
7
8
Compression Spring (Short Plunger)
Bushing, 3/8" I.D. (Oilite)
Washer, 3/8" I.D. X 5/8" O.D. X 1/16"
Retaining Ring, 3/8" ø Shaft
Plunger Tip (Black 50 Duro)
47< 63, 3$57 1º
1
2
3
1
1
266-5010-00
280-5010-00
242-5014-00
270-5012-00
545-5276-00
??????????????????????????????????????????????????
$XWRSOXQJHU&RLO$VVHPEO\,WHPVZLWK
$XWRSOXQJHU$UP:HOG$VVHPEO\,WHPV
$XWRPDWLFDOO\ODXQFKHVWKHEDOOLQWRSOD\
1º ·3/81*(5 &2,/ 3$57 1$0(
1
Autoplunger Coil Bracket Assembly
47< 63, 3$57 1º
1
515-6527-00
Item 1 is secured below the playfield by: #8 X 1/2" HWH AB (Zinc) (Qty. 9) (234-5101-00)
2
Coil Retainer Bracket
1
535-5203-03
Item 2 is secured to Item 1 by: #8-32 X 1/4" PPH MS (Sems) Zinc (Qty. 2) (232-5300-00)
3 Coil, 23-700
1 090-5022-00T
ORDERING ABOVE (ITEM 3) COIL PART Nº WILL INCLUDE:
— Diode, 1N4004 (positioned at top)
1
112-5003-00
4 Coil Sleeve
1 545-5031-00
1 515-5338-00
5 Plunger & Link Assembly
ORDERING ABOVE (ITEM 5) SUB-ASSY. PART Nº WILL INCLUDE:
5A Plunger 2"
1
530-5025-01
1
545-5293-00
5B Plunger Link
5C Roll Pin, 1/8" ø X 5/8" Lg.
1
251-5008-00
Item 5B is secured to Item 7 by: Retaining Ring, 1/4" ø Shaft (Qty. 1) (270-5002-00)
Ordering Note: If 515-5338-00 is unavailable, order the individual part(s) actually required.
6
Compression (Return) Spring
1º $50 :(/' 3$57 1$0(
7
Arm Weld Assembly
1
266-5020-00
Autoplunger Fulcrum
Nyliner, 1/4" (Thomson #4l1-FF)
6HFWLRQ&KDSWHU
3DJH
%
1
515-6526-00
1
2
535-7697-00
545-5423-00
$
Qty. 2
47< 63, 3$57 1º
Item 7 is secured to Item 8 by: Retaining Ring, 1/4" ø Shaft (Qty. 1) (270-5002-00)
8
9
&
4
6HF'UDZLQJV
'UDZLQJVIRU0DMRU
$VVHPEOLHV5DPSV
%DOO7URXJK$VVHPEO\,WHPV
DQG$VVRFLDWHG3DUWV6HH3DUWV7DEOHEHORZ
2UGHULQJ1RWH,GHQWLFDOWRH[FHSWLWGRHV
UHTXLUH,WHP7URXJK%DOO*XLGH3ODWHXVHGRQO\ZKHQ
PDJQHWVDUHSUHVHQWLQWKHJDPH
7DNH6SHFLDO1RWH
Item AP-A, Enter / Exit Scoop, 535-7329-01
(not included with the 4-Ball Trough Assy.),
is shown how it is actually positioned
over the 4-Ball Trough Assembly.
!
It is mounted above the playfield.
$
(QWHU([LW6FRRS
SW. 15
See securing
hardware under
Items 12 & 13.
Shown Broken View
to see complete switches
SW. 14
SW. 11
SW. 12
SW. 13
Shown Broken View
6HH2UGHULQJ
1RWH$ERYH
Qty. 3
Qty. 3
SW. 15
4
See securing
hardware
under Item 11
SW. 14
7DNH1RWH
Item 12, Dual OPTO TRANS (Transmitter)
Board, 515-0173-00, is mounted on the
other side of the Trough Assembly, in line
with Item 13, Dual OPTO REC (Receiver)
Board, 515-0174-00, using same hardware.
An asterisk (*) indicates item(s) are not noted in the pictorials.
*
For a break-down of parts of Items 12 & 13, OPTO Boards
(515-0173-00 & 515-0174-00), see Section 5, Chapter 4, Trough
Up-Kicker Dual OPTO Boards Theory of Operation & Schematic,
Component Layout & Parts.
1º ,1',9,'8$/ 3$57 1$0(
1
Ball Trough Outhole Mounting Bracket
47< 63, 3$57 1º
1
515-6580-01
Item 1 is secured below the playfield by: #8 X 1/2" HWH AB (Zinc) (Qty. 6) (234-5101-00)
Micro Switch (Roller Actuator, Lite-Force)
Item 2 is secured to Item 1 by: #2-56 X 1/2" HWH (Sr) UNS #4HD TR3 BO (Qty. 6) (237-5937-02)
Item 2 requires: Heat Shrink Tubing 1/8" ø PUI-24 (Qty. 1"/per) (605-5006-00)
2
3
4
Switch Diode, 1N4001
Coil Mounting Bracket
3
180-5119-02
3
1
112-5001-00
535-7330-01
Item 4 is secured to Item 1 by: #8-32 X 3/8" HWH Swage (Sr.) Zinc (Qty. 4) (237-5975-00)
5
Coil Retaining Bracket
1
535-5203-03
1º
10
11
47< 63, 3$57 1º
,1',9,'8$/ 3$57 1$0(
Rubber Bumper (Grommet)
Trough Ball Guide Plate
1
1
545-5105-00
535-7801-00
Item 11 is secured to Item 1 by: 1/4" X 5/16" X .144" I.D. Spacer Tap. (Qty. 1)
(254-5014-03) and #2-56 X 1/2" HWH (Ser) UNS #4HD TR3 BO (Qty. 4) (237-5937-02)
12
13
Dual OPTO TRANS Board Assembly
Dual OPTO REC Board Assembly
1
1
515-0173-00
515-0174-00
Items 12 & 13 are by: #6-32 X 5/8" HWH Swage (Serr) Zinc (Qty. 3/per) (237-5976-04)
For Individual Items use : Dual OPTO TRANS Bd. (Qty. 1) (520-5173-00), Dual OPTO REC
Bd. (Qty. 1) (520-5174-00), OPTO PCB Tube Spacer (Brass) (Qty. 3/per) (530-5308-02) or
OPTO PCB Rubber Grommet (Qty. 3/per) (545-5518-00)
Item 5 is secured to Item 4 by: #8-32 X 1/4" HWH MS (Serr) Zinc (Qty. 2) (237-5964-01)
6 Coil, 26-1200
1 090-5044-00T
ASSOCIATED PARTS ARE NOT INCLUDED WITH THE ABOVE ASSEMBLY.
ORDERING ABOVE (ITEM 6) COIL PART Nº WILL INCLUDE:
— Diode, 1N4004 (positioned at top)
1
112-5003-00
47< 63, 3$57 1º
1º $662&,$7(' 3$57 1$0(
7 Coil Sleeve (Short) (Formost #10-7077)
1 545-5076-01 AP-A Ball Trough Enter / Exit Scoop
1 535-7329-01
8 Plunger Assembly
1 515-5941-01 Item AP-A secured to the playfield by: #8 X 1/2" HWH AB (Zinc) (Qty. 4) (234-5101-00).
9 Compression (Return) Spring
1 266-5020-00 AP-B* Steel Balls (1-1/16" ø)
4 260-5000-00
'UDZLQJVIRU0DMRU
$VVHPEOLHV5DPSV
6HFWLRQ&KDSWHU
3DJH
6HF'UDZLQJV
SEE NEW FLIPPER
)OLSSHU/HIW$VVHPEO\,WHPV
DQG$VVRFLDWHG3DUW:KLWH)OLSSHU%DW6KDIW$VV\,WHP$3$
,
3
2
5
Item 1,
Item 4,
and
Item 12B
(just the Pawl)
7
$
1
The coils may also
differ depending on
the game.
7
$
-
*
DEDICATED
SW. 02
'
(
25*
)
$
-
(+
+
%
,
*
,
&
&
+
-
*
7DNH1RWH
®
25*
/HIW4
:KHQ UHSODFLQJ ,WHP Š% 3DZO 0QWJ /LQN $VV\ ZH DGYLVH
UHSODFLQJ ZLWK HQWLUH ,WHP $ )OLSSHU 3OXQJHU/LQN $VV\ GXH WR RYHUDOO ZHDU WHDU
&KHFN DOO RWKHU FRPSRQHQWV DQG UHSODFH DV UHTXLUHG
,WHPV
$-6LGH9LHZ
0
The differences
between the
Left & Right
Flippers are:
!
$
"R" indicates Item noted is secured with rivet(s) as listed.
%
Flipper Rebuild Kit (Items 6, 10 & 12) Now Available:
6HF'UDZLQJV
)OLSSHU/HIW5HEXLOG.LW
1º ,1',9,'8$/ 3$57 1$0(
47< 63, 3$57 1º
Flipper Base Plate Kit (Left)
1 515-6617-01
ORDERING ABOVE (ITEM 1) KIT (LEFT) PART Nº WILL INCLUDE:
1
Note: Flipper Base Plate (Left) comes threaded with all securing
hardware (Thread Forming Screws) as listed under each of
the Items which will get secured to it (Items 2, 3, 6 & 8).
Item 1 is secured below the playfield by: #10 X 1/2" HWH MS (Serr) Zinc ST (Qty. 8)
(237-5949-00)
2
Flipper Bat Bushing
1
545-5594-00
Item 2 is secured to Item 1 by: #6-32 X 3/8" HWH Swage (Ser.) Zc. (Qty. 3) (237-5976-02)
3
Power (End of Stroke) Switch
1
180-5149-00
Item 3 is secured to Item 1 by: #6-32 X 5/8" HWH Swage (Ser.) Zc. (Qty. 2) (237-5976-04)
4
5
6
Switch Plate/Spring Return Lt. Brkt.
Flipper Return Spring
Coil Stop Bracket Sub-Assembly
1
1
1
535-7354-01
265-5035-00
515-6308-01
Item 6 is secured to Item 1 by: #10-32 X 3/8" SHWH Swage (Serr) Zinc (Qty. 2)
(237-5985-00) and #10 Split Lock Washer (Qty. 2) (244-5003-00)
7
8
Spring Washer (17/32" ID X 3/4" X 1")
Coil Support Bracket
1
1
269-5002-00
535-7356-00
Item 8 is secured to Item 1 by: #8-32 X 3/8" HWH Swage (Ser.) Zc. (Qty. 2) (237-5975-00)
1º
12
47< 63, 3$57 1º
,1',9,'8$/ 3$57 1$0(
Plunger, Link & Pawl (Left) Sub-Assy.
1 515-6518-01
ORDERING ABOVE (ITEM 12) SUB-ASSY. PART Nº WILL INCLUDE:
515-6304-01
1
12A Flipper Plunger/Link Sub-Assy.
includes :
545-5611-00
1
Plunger "Flipper" Link
includes :
251-5015-02
1
Spirol Pin ø 5/32" X 3/4" Lg.
includes :
530-5349-01
1
Flipper Plunger with "Flat"
515-6305-01
®12B Pawl (Mntg. Link) (Left) Sub-Assy.
1
includes :
535-7271-01
1
Pawl (Mounting Link) (Left) Plain
includes :
® Switch Actuator
545-5612-00
1
includes :
249-5003-00
1
Rivet, 1/8" ø X 1/4" Lg.
535-7353-00
1
12C Return Bracket
530-5139-01
1
12D Flipper Link Bushing (Metal, Ext.)
(.385" Lg. X .192" ID X .312" OD)
237-5950-01
1
12E #10-32 X 1-1/4" Lg. Socket Head
237-5966-00
1
12F #10-32 X 7/8" Lg. Socket Head
240-5203-00
2
12G #10-32 Nylon Stop Nut
244-5003-00
2
12H #10 Split Lock Washer
242-5039-01
12I
Washer .203" ID X .63" OD X .105" Thk w/cut 1
242-5038-00
2
12J
Washer .203" ID X .63" OD X .062" Thk
!!! FLIPPER (LT) REBUILD KIT now AVAILABLE:
!!! Includes Items 6, 10 & 12 Ask your Distributor
SAVE MONEY! and order the
for Part Number 500-6307-10 (for the LEFT)
ASSOCIATED PARTS ARE NOT INCLUDED WITH THE ABOVE ASSEMBLY.
Coil, 23-1100 (ORANGE) (Left)
1 090-5030-00T
47< 63, 3$57 1º
ORDERING ABOVE (ITEM 9) COIL PART Nº WILL INCLUDE:
1º $662&,$7(' 3$57 1$0(
— Diode, 1N4004 (positioned at top)
1
112-5003-00
WHITE Flipper Bat & Shaft (Plain)
1 515-5133-08-06
10 Coil Sleeve
1 545-5388-00 AP-A (Non-Knurled End) Assembly
Large
Flipper
BLACK
Rubber
Ring
Deflector
Pad
(Bumper)
1 545-5277-00
1 545-5428-00
11
9
6HFWLRQ&KDSWHU
3DJH
'UDZLQJVIRU0DMRU
$VVHPEOLHV5DPSV
SEE NEW FLIPPER
)OLSSHU5LJKW$VVHPEO\,WHPV
'
)
%
(+
,
-
*
&
,
&
-
,
+
*
7DNH1RWH
!
$
®
%
"R" indicates Item noted is secured with rivet(s) as listed.
Flipper Rebuild Kit (Items 6, 10 & 12) Now Available:
)OLSSHU5LJKW5HEXLOG.LW
1º ,1',9,'8$/ 3$57 1$0(
47< 63, 3$57 1º
47< 63, 3$57 1º
1º ,1',9,'8$/ 3$57 1$0(
Flipper Base Plate Kit (Right)
1 515-6617-00 12 Plunger, Link & Pawl (Rt.) Sub-Assy.
1 515-6518-00
ORDERING ABOVE (ITEM 1) KIT (RIGHT) PART Nº WILL INCLUDE: ORDERING ABOVE (ITEM 12) SUB-ASSY. PART Nº WILL INCLUDE:
515-6304-01
1
12A Flipper Plunger/Link Sub-Assy.
includes :
Note: Flipper Base Plate (Right) comes threaded with all securing
545-5611-00
1
Plunger "Flipper" Link
includes :
hardware (Thread Forming Screws) as listed under each of
251-5015-02
1
Spirol Pin ø 5/32" X 3/4" Lg.
includes :
the Items which will get secured to it (Items 2, 3, 6 & 8).
530-5349-01
1
Flipper Plunger with "Flat"
515-6305-00
®12B Pawl (Mntg. Link) (Rt.) Sub-Assy.
1
Item 1 is secured below the playfield by: #10 X 1/2" HWH MS (Serr) Zinc ST (Qty. 8)
includes :
535-7271-00
1
Pawl (Mounting Link) (Rt.) Plain
(237-5949-00)
includes :
® Switch Actuator
545-5612-00
1
249-5003-00
1
2 Flipper Bat Bushing
1 545-5594-00 includes : Rivet, 1/8" ø X 1/4" Lg.
535-7353-00
1
Return Bracket
Item 2 is secured to Item 1 by: #6-32 X 3/8" HWH Swage (Ser.) Zc. (Qty. 3) (237-5976-02) 12C
530-5139-01
1
Link Bushing (Metal, Ext.)
3 Power (End of Stroke) Switch
1 180-5149-00 12D Flipper
(.385" Lg. X .192" ID X .312" OD)
Item 3 is secured to Item 1 by: #6-32 X 5/8" HWH Swage (Ser.) Zc. (Qty. 2) (237-5976-04)
237-5950-01
1
12E #10-32 X 1-1/4" Lg. Socket Head
4 Switch Plate/Spring Return Rt. Brkt.
1 535-7354-00 12F #10-32 X 7/8" Lg. Socket Head
237-5966-00
1
240-5203-00
2
5 Flipper Return Spring
1 265-5035-00 12G #10-32 Nylon Stop Nut
244-5003-00
2
12H #10 Split Lock Washer
Coil
Stop
Bracket
Sub-Assembly
6
1 515-6308-01 12I Washer .203" ID X .63" OD X .105" Thk w/cut 1
242-5039-01
Item 6 is secured to Item 1 by: #10-32 X 3/8" SHWH Swage (Serr) Zinc (Qty. 2)
242-5038-00
2
12J
Washer .203" ID X .63" OD X .062" Thk
(237-5985-00) and #10 Split Lock Washer (Qty. 2) (244-5003-00)
1
7
8
Spring Washer (17/32" ID X 3/4" X 1")
Coil Support Bracket
1
1
269-5002-00
535-7356-00
Item 8 is secured to Item 1 by: #8-32 X 3/8" HWH Swage (Ser.) Zc. (Qty. 2) (237-5975-00)
!!! FLIPPER (RT) REBUILD KIT now AVAILABLE:
!!! Includes Items 6, 10 & 12 Ask your Distributor
SAVE MONEY! and order the
or Part Number 500-6307-00 (for the RIGHT)
ASSOCIATED PARTS ARE NOT INCLUDED WITH THE ABOVE ASSEMBLY.
Coil, 23-1100 (ORANGE) (Right)
1 090-5030-00T
47< 63, 3$57 1º
ORDERING ABOVE (ITEM 9) COIL PART Nº WILL INCLUDE:
1º $662&,$7(' 3$57 1$0(
— Diode, 1N4004 (positioned at top)
1
112-5003-00
WHITE Flipper Bat & Shaft (Plain)
1 515-5133-08-06
10 Coil Sleeve
1 545-5388-00 AP-A (Non-Knurled End) Assembly
Large
Flipper
BLACK
Rubber
Ring
Deflector
Pad
(Bumper)
1 545-5277-00
1 545-5428-00
11
9
'UDZLQJVIRU0DMRU
$VVHPEOLHV5DPSV
6HFWLRQ&KDSWHU
3DJH
6HF'UDZLQJV
$
+
7
$
25*
1
(
*
$
7
DEDICATED
SW. 04
5
5LJKW4
-
The coils may also
differ depending on
the game.
2
25*
Item 1,
Item 4,
and
Item 12B
(just the Pawl)
3
,WHPV
$-6LGH9LHZ
The differences
between the
Left & Right
Flippers are:
0
:KHQ UHSODFLQJ ,WHP Š% 3DZO 0QWJ /LQN $VV\ ZH DGYLVH
UHSODFLQJ ZLWK HQWLUH ,WHP $ )OLSSHU 3OXQJHU/LQN $VV\ GXH WR RYHUDOO ZHDU WHDU
&KHFN DOO RWKHU FRPSRQHQWV DQG UHSODFH DV UHTXLUHG
DQG$VVRFLDWHG3DUW:KLWH)OLSSHU%DW6KDIW$VV\,WHP$3$
6OLQJVKRW$VVHPEOLHV4W\,WHPV
1º ,1',9,'8$/ 3$57 1$0(
1
Slingshot Bracket Assembly
47< 63, 3$57 1º
1
515-5339-01
Item 1 is secured below the playfield by: #8 X 1/2" HWH AB (Zinc) (Qty. 3) (234-5101-00)
2
Coil Retaining Bracket
1
535-5203-03
Item 2 is secured to Item 1 by: #8-32 X 3/8" PPH MS (Sems) (Qty. 2) (232-5301-00)
%
3 Coil, 23-800
1 090-5001-00T
ORDERING ABOVE (ITEM 3) COIL PART Nº WILL INCLUDE:
— Diode, 1N4004 (positioned at top)
1
112-5003-00
4 Coil Sleeve
1 545-5031-00
1 515-5338-00
5 Plunger & Link Assembly
ORDERING ABOVE (ITEM 5) SUB-ASSY. PART Nº WILL INCLUDE:
5A Plunger 2" Lg.
1
530-5025-01
1
545-5293-00
5B Plunger Link
5C Roll Pin 1/8" ø x 5/8" Lg.
1
251-5008-00
$
Item 5B is secured to Item 10A by: Retaining Ring, 1/4" ø Shaft (Qty. 1) (270-5002-00)
Ordering Note: If 515-5338-00 is unavailable, order the individual part(s) actually required.
Compression (Return) Spring
Slingshot Stack (Blade) Switch
Switch Body Protect Plate
1
2
2
266-5020-00
180-5054-00
535-5045-00
Items 7 & 8 are secured to Item 1 by: #6-32 X 5/8" HWH Swage (Qty. 4) (237-5976-04)
9 Switch Diode, 1N4001
10® Riveted Arm & Tip Assembly
2
1
SW. 59
(Qty. 2)
112-5001-00
515-5340-01
SW. 62
(Qty. 2)
ORDERING ABOVE ® RIVETED ASSY. PART Nº WILL INCLUDE:
10A Arm
1
515-5341-01
10B® Kicker Tip (secured to 1A by 1C)
1
545-5216-01
10C* Rivet, 1/8" ø x 1/4" Lg.
1
249-5003-00
Item 10A is secured to Item 1 by: Retaining Ring, 1/4" ø Shaft (Qty. 1) (270-5002-00)
Ordering Note: If 515-5340-01 is unavailable, order the individual part(s) actually required.
7DNH1RWH
An asterisk (*) indicates item(s) are not noted in the pictorials.
*
®
%
Hinge
Stud
Qty. 2
$
&
Qty. 2
/HIW4
5LJKW4
6
7
8
"R" indicates Item noted is secured with rivet(s) as listed.
Qty. 1/per
Coil Sleeve thru Coil
??????????????????????????????????????????????????
Armature Stop & Shading Ring
ƒ(MHFW$VVHPEO\,WHPV
6HF'UDZLQJV
4
1º ,1',9,'8$/ 3$57 1$0(
1
Mounting Bracket 30° Bend (Frame)
47< 63, 3$57 1º
1
535-8932-00
Item 1 is secured below the playfield by: #8 X 1/2" HWH AB (Zinc) (Qty. 2) (234-5101-00)
2
Coil Retaining Bracket
1
535-5203-03
Item 2 is secured to Item 1 by: #8-32 X 1/4" PPH MS (Sems) (Qty. 2) (232-5300-00)
3 Coil, 26-1200
1 090-5044-00T
ORDERING ABOVE (ITEM 3) COIL PART Nº WILL INCLUDE:
— Diode, 1N4004 (positioned at top)
1
112-5003-00
6HFWLRQ&KDSWHU
3DJH
1º ,1',9,'8$/ 3$57 1$0(
4
5
6
7
8
Coil Sleeve (Short) (Formost #10-7077)
Spring Washer (17/32" ID X 3/4" X 1")
Plunger Assembly
Compression (Return) Spring
Rubber Bumper (Grommet)
47< 63, 3$57 1º
1
1
1
1
1
545-5076-01
269-5002-00
515-7197-00
266-5020-00
545-5105-00
Ordering Note: If 500-6511-01 is unavailable, order the individual part(s) actually required
or try -00 and change the coil to 26-1200 (090-5044-00T).
'UDZLQJVIRU0DMRU
$VVHPEOLHV5DPSV
%XPSHU7RS$VVHPEOLHV4W\,WHPV
%XPSHU%RWWRP$VVHPEOLHV4W\,WHPV
%XPSHU6ZLWFK$VVHPEOLHV4W\,WHPV
DQG$VVRFLDWHG3DUWV6HH7DEOH%HORZ,WHP$3$
!
LP. 78, LP. 79 (Qty. 2)
$
$VVHPEOHG
9LHZ
LP. 78
LP. 79
(Qty. 2)
3/$<),(/'
:22'
SW. 49
SW. 50
SW. 51
Individual parts can be ordered.
However, if the entire Bumper is
required, use all three (3)
Assembly Part Numbers at the
top of this page.
([SORGHG
9LHZ
44
7DNH1RWH
47< 63, 3$57 1º
1º %803(5 723 3$57 1$0(
1
2
3
#555 Wedge Base Bulb
#555 Wedge Base Socket
Bumper Body
1
1
1
165-5002-00
077-5206-00
545-5197-00
Item 3 is secured by: #5 X 7/8" PRH AB (Zinc) (Qty. 2) (237-5826-00)
4
5
6
7
515-5085-00
1
1
1
545-5607-00
266-5048-00
545-5195-00
Plunger
1 530-5348-00
Compression (Return) Spring
1 266-5047-00
Coil, 26-1200
1 090-5044-00T
ORDERING ABOVE (ITEM 10) COIL PART Nº WILL INCLUDE:
— Diode, 1N4004 (positioned at top)
1
112-5003-00
11 Coil Sleeve
1 545-5031-00
1 545-5609-00
12 Fiber Yoke
13 Metal Yoke
1 535-7346-00
14 Metal Yoke Stop
1 535-7347-00
8
9
10
SW. 49
SW. 50
SW. 51
Bumper Skirt
Bumper Skirt Compression Spring
Bumper Base
1º %803(5 %27720 3$57 1$0( 47< 63, 3$57 1º
1
Item 14 is secured by: #6-32 X 1/4" HWH Swage (Serr.) Zinc (Qty. 2) (237-5976-01)
15
Side View of 14 & 15
'UDZLQJVIRU0DMRU
$VVHPEOLHV5DPSV
44
Coil Bracket Welded Assembly
1
515-5939-00
Item 15 is secured by: #6-32 X 1-3/16" Spiral Fin Shank (Qty. 3) (237-5957-00) and
#6-32 Nylon Stop Nut (Qty. 3) (240-5005-00)
1º
16
%803(5 6:,7&+ 3$57 1$0( 47< 63, 3$57 1º
Switch Bracket
1
535-7342-00
Item 16 is secured by: #8 X 1/2" SHWH AB (Zinc) (Qty. 2) (234-5101-00)
17
18
19
Spoon Switch Actuator
Bumper Stack (Blade) Switch
Switch Body Protect Plate
1
1
1
545-5610-01
180-5015-03
535-7344-00
Items 18 & 19 are secured by: #6-32 X 3/4" HWH Swage (Serr) Zc. (Qty. 2) (237-5976-05)
20
Switch Diode, 1N4001
1
112-5001-00
The Top & Bottom Assemblies are secured together by hardware included in assemblies.
ASSOCIATED PART IS NOT INCLUDED WITH THE ABOVE ASSEMBLY.
1º $662&,$7(' 3$57 1$0(
AP-A Bumper Cap (Red)
47< 63, 3$57 1º
3
550-5057-02
Item AP-A is secured to Item 4 by: #4 X 3/4" PRH (Zinc) T-25 (Qty. 2/per) (237-5873-00)
6HFWLRQ&KDSWHU
3DJH
6HF'UDZLQJV
3/$<),(/' :22'
Ring Assembly
Item 4 is secured by: #6-32 Nylon Stop Nut (Qty. 2) (240-5005-00)
%HDG&XUWDLQ%RWWRP/HIW5LJKW$VV\,WHPV
1RWVROGDVDQDVVHPEO\RUGHUWKHLQGLYLGXDOSDUWVDFWXDOO\UHTXLUHG
7KLV$VVHPEO\ZRUNVLQ
FRQMXQFWLRQZLWKWKH%HDG
&XUWDLQ7RS$VVHPEO\
1H[W3DJH
7RS9LHZ/HIW
7RS9LHZ5LJKW
7DNH1RWH
The only difference between
these 2 assemblies is how the
coil is mounted (180° Rotated).
Note the Position of the Coil
Lugs in the Side & 3D Views.
6LGH9LHZ
/HIW
4
6LGH9LHZ
5LJKW
%RWWRP9LHZ
/HIW
4
%RWWRP9LHZ
5LJKW
([SORGHG9LHZ
/HIW6W\OH6KRZQ
6HF'UDZLQJV
4
REF. A
See
securing
hardware
under
Item 1
4
4
'9LHZ
/HIW
'9LHZ
5LJKW
1º ,1',9,'8$/ 3$57 1$0(
1
Coil Mounting Bracket
47< 63, 3$57 1º
2
535-9048-00
Item 1 is secured below the playfield by: #8 X 1/2" HWH AB (Zc) (Qty. 3/per) (234-5101-00)
Item 1 (Ref. A) is secured to the Bead Curtain Frame (Item 1, Next Page) by:
#6-32 X 3/8" HWH Swage (Ser) Zinc) (Qty. 1/per: 1 side only) (237-5976-02) and
#6-32 Nylon Stop Nut (Qty. 1/per: 1 side only) (240-5005-00)
2
Mounting Bracket
2
535-9049-00
Item 2 is secured to Item 1 by: #8-32 X 3/8" HWH MS (Zinc) (Qty. 2/per) (237-5903-00)
3 Coil, 26-1200
2 090-5044-00T
ORDERING ABOVE (ITEM 3) COIL PART Nº WILL INCLUDE:
1/per 112-5003-00
— Diode, 1N4004 (positioned at top)
4 Coil Sleeve (with extension)
2 545-5847-00
2 545-5348-02
5 5/16" I.D. BLACK Rubber Ring
See securing
hardware
under Item 2
6HFWLRQ&KDSWHU
3DJH
'UDZLQJVIRU0DMRU
$VVHPEOLHV5DPSV
%HDG&XUWDLQ7RS$VVHPEO\,WHPV
1RWVROGDVDQDVVHPEO\RUGHUWKHLQGLYLGXDOSDUWVDFWXDOO\UHTXLUHG
$VVHPEOHG
See securing hardware
9LHZ
under Item 11
LP. 69
LP. 68
LP. 67
(Qty. 2)
Qty. 2
([SORGHG
9LHZ
Qty. 10
REF. A
REF. A
7KH &RLOV EHORZ WKH SOD\ILHOG
PDJQHWL]H WKHVH SRVWV WKXV
SXOOLQJ EDFN WKH EHDGV
Qty. 4
7KLV$VVHPEO\ZRUNVLQ
FRQMXQFWLRQZLWKWKH%HDG
&XUWDLQ%RWWRP$VVHPEOLHV
3UHYLRXV3DJH
Qty. 4
See securing
hardware
under Item 8
Qty. 6
$YDLODELOLW\1RWH
Items 9-12: Plastics and Photo
Inserts, are not available
individually. The entire Set(s)
and/or Kit(s) must be ordered.
See Section 4, Chapter 1, Page
63 for Plastics & Decals.
6HF'UDZLQJV
This game is supplied with 3 Set
of Photo Inserts. A: "No Nudity",
B: "Nudity Factory Suggested"
and C: "Some Full Nudity".
1 Set was installed at the
Factory and the other 2 Sets
are packed with the game.
Read the Instruction Sheet
(756-5009-00) which is
provided with the Photo
Insert Kit inside this game.
For the same 3 Sets, order Kit
502-5010-00, no other style Photo
Inserts are available.
Qty. 2
Qty. 2
1º
,1',9,'8$/ 3$57 1$0(
1
Bead Curtain Frame
47< 63, 3$57 1º
1
535-9047-00
Item 1 is secured above the playfield by: #8 X 1/2" HWH AB (Zc) (Qty. 2) (234-5101-00)
Item 1 (Ref. A) is secured to the Coil Mounting Brackets (Item 1, Previous Page) by:
#6-32 X 3/8" HWH Swage (Ser) Zinc) (Qty. 1/per: 1 side only) (237-5976-02) and
#6-32 Nylon Stop Nut (Qty. 1/per: 1 side only) (240-5005-00)
2
3
4
5
6
7
8
Rubber Grommet (Double-Edge)
Ball (Bead) Chain, 4" Brass (#6 4PBS)
#555 IDC Snap-On Socket
#555 Wedge Base Bulb (Clear)
Post (Magnetized with Coils)
Nylon Post Sleeve
1/4" Clamp (Double)
6
10
4
4
2
2
1
280-5015-00
880-5056-00
077-5216-00
165-5002-00
530-5603-01
545-6028-16
040-5000-23
Item 8 is secured to Item 1 by: #8-32 X 3/8" HWH MS Type C (Qty. 1) (237-5903-00) and
#8 Washer (Qty. 1) (242-5005-00)
'UDZLQJVIRU0DMRU
$VVHPEOLHV5DPSV
1º
,1',9,'8$/ 3$57 1$0(
9
10
11
Clear Plastic -60 (Light Board)
Clear Plastic -59 T7
Screened Plastic -23
47< 63, 3$57 1º
1
2
1
830-5989-XX
830-5989-XX
from 830-5988-XX
from
from
Item 11 is secured into Item 2 on Item 1 by: #8-32 X 1" Pem Self-Clinching Stud (Qty. 3)
(237-5867-16), #8-32 Keps Nut (Qty. 3) (240-5104-00) and Item 2 (Qty. 1) at rear.
12
Photo Insert -T7 (3 Styles A, B & C)
1
from
502-5010-00
Items 9-12: READ "Availability Note" above on ordering availabilty.
6HFWLRQ&KDSWHU
3DJH
([LW6FRRS3OD\ER\5DEELW+HDG,WHP
*XLGHVEDOOIURP98.LQWRWKH5LJKW:LUH5DPS
1º ,1',9,'8$/ 3$57 1$0(
1
Exit Scoop (Playboy Rabbit Head)
47< 63, 3$57 1º
1
535-9097-01
Item 1 is secured above the playfield by: #8-32 X 1" HWH (Zinc) (Qty. 2) (237-6003-00)
For view of this screw, see identical part used on the 1-Bank Drop Target, Item 20.
See securing
hardware
under Item 1
??????????????????????????????????????????????????
98.9HUWLFDO8S.LFNHU/HIW6W\OH$VVHPEO\,WHPV
%DOOODXQFKHVLQWRWKHVFRRSDERYHRQWRWKH5LJKW:LUH5DPS
1º ,1',9,'8$/ 3$57 1$0(
1
VUK Coil Mounting Bracket (Left Style)
47< 63, 3$57 1º
1
535-8296-00
Item 1 is secured under the playfield by: #8 X 1/2" HWH AB (Zinc) (Qty. 3) (234-5101-00)
Micro Sw. (Heavy Duty "Y" Flat Actuator)
Switch Lug Insulator (Fiche Paper)
Switch Body Protect Plate
1
1
1
180-5116-01
545-5759-00
535-6539-00
7RS
9LHZ
SW. 35
Items 2-4 are secured by: #2-56 X 1/2" HWH MS (Serr) Zc TF 3/16" (Qty. 2) (237-5937-02)
5
Coil Retaining Bracket
1
535-5203-03
Item 5 is secured by: #8-32 X 1/4" PPH MS (Sems) Zinc (Qty. 2) (232-5300-00)
Coil, 26-1200
1 090-5044-00T
ORDERING ABOVE (ITEM 6) COIL PART Nº WILL INCLUDE:
— Diode, 1N4004 (positioned at top)
1
112-5003-00
7 Coil Sleeve (Short) (Formost #10-7077)
1 545-5076-01
8 Coil Lug Insulator (Fiche Paper)
1 545-5431-00
9 Spring Washer, 17/32" ID X 3/4" X 1"
1 269-5002-00
1 515-5941-01
10 Plunger Assembly
11 Compression (Relay) Spring
1 266-5020-00
12 Rubber Bumper (Grommet)
1 545-5105-00
6
7DNH1RWH
*
SW. 35
4
6HF'UDZLQJV
2
3
4
An asterisk (*) indicates item is Not Shown in
pictorial.
The Switch Diode, 1N4001, is not located on this
assembly (nor included); it’s located on a Terminal
Strip under the playfield. See Section 5, Chapter
2, Playfield Terminal Strips..., Page 101.
6HFWLRQ&KDSWHU
3DJH
'UDZLQJVIRU0DMRU
$VVHPEOLHV5DPSV
%DOO'HIOHFWRU$VVHPEO\,WHPV
6WRSVWKHEDOOLQWKH/HIW2UELW
7RS
9LHZ
1º ,1',9,'8$/ 3$57 1$0(
1
Ball Deflector Coil Mounting Bracket
47< 63, 3$57 1º
1
535-6857-02
Item 1 is secured below the playfield by: #8 X 1/2" HWH AB (Zinc) (Qty. 4) (234-5101-00)
2
Coil Retaining Bracket
1
535-5203-03
Item 2 is secured to Item 1 by: #8-32 X 1/4" PPH MS (Sems) (Qty. 2) (232-5300-00)
3 Coil, 26-1200
1 090-5044-00T
ORDERING ABOVE (ITEM 3) COIL PART Nº WILL INCLUDE:
— Diode, 1N4004 (positioned at top)
1
112-5003-00
4 Coil Sleeve (Short) (Formost #10-7077)
1 545-5076-01
5 Spring Washer (17/32" ID X 3/4" X 1") 1 269-5002-00
6 Solid Plunger Assembly (Tapered Top) 1 515-7089-00
7 Post Black Rubber (Sleeve Tall)
1 545-5308-00
8 Compression (Relay) Spring
1 266-5022-01
9 #10-32 Adj. Spindle Stop w/Rubber Tip 1 280-5014-00
4
Item 9 is secured by: #10-32 Keps Nut (Qty. 1) (240-5208-00)
Ordering Note: If 500-6433-00 is unavailable, order the individual part(s) actually required
or try 500-5788-XX and change it’s Solid Plunger with above Solid Plunger (515-7089-00)
and ORDER the Post Rubber Sleeve (545-5308-00) to add to the tip. The Rubber Sleeve is
not included with the Solid Plunger. PERIODICALLY CHECK THIS RUBBER FOR WEAR.
%DOO/RFN/RQJ3OXQJHU$VVHPEO\,WHPV
/RFNVDQGUHOHDVHVWKHEDOOVRQWKH/HIW:LUH5DPS
1º ,1',9,'8$/ 3$57 1$0(
1
Ball Lock Mounting Bracket Assy.
47< 63, 3$57 1º
1
515-7132-00
2
Coil Retaining Bracket
2
535-5203-03
Item 2 is secured by: #8-32 X 1/4" PPH MS (Sems) Zinc (Qty. 2/per) (232-5300-00)
3 Coil, 27-1500
1 090-5004-00T
ORDERING ABOVE (ITEM 3) COIL PART Nº WILL INCLUDE:
— Diode, 1N4004 (positioned at top)
1
112-5003-00
4 Coil Sleeve
1 545-5411-00
5 Spring Washer (17/32" ID X 3/4" X 1") 1 269-5002-00
6 Solid Plunger Assy. (5.53" ID X .375" OD)
1 515-6119-04
1 266-5020-00
7 Compression (Relay) Spring
Item 7 is secured by: Retaining Ring, 7/16" ø Shaft (Qty. 1) (270-5005-00)
8
Qty. 2
Nyliner 7/16" Shaft (7L2-FF)
1
545-5418-01
Ordering Note: If 500-5867-04 is unavailable, order the individual part(s) actually required
or try 500-5867-00 (4.9" Plunger) -01 (4.87" Plunger) -02 (3.81" Plunger) or
-03 (5.81" Plunger) and change it’s Solid Plunger with above Solid Plunger (515-6119-04).
4
Qty. 2
'UDZLQJVIRU0DMRU
$VVHPEOLHV5DPSV
6HFWLRQ&KDSWHU
3DJH
6HF'UDZLQJV
Item 1 is secured below the playfield by: #8 X 1/2" HWH AB (Zinc) (Qty. 4) (234-5101-00)
8S'RZQ3RVW$VV\,WHPV
2SHQ&ORVHVWKH0DJD]LQH
1º ,1',9,'8$/ 3$57 1$0(
1
Ball Deflector Coil Mounting Bracket
47< 63, 3$57 1º
1
535-6857-02
Item 1 is secured below the playfield by: #8 X 1/2" HWH AB (Zinc) (Qty. 4) (234-5101-00)
2
Coil Retaining Bracket
1
535-5203-03
Item 2 is secured by: #8-32 X 1/4" PPH MS (Sems) Zinc (Qty. 2) (232-5300-00)
Coil, 24-940
1 090-5036-00B
ORDERING ABOVE (ITEM 3) COIL PART Nº WILL INCLUDE:
— Diode, 1N4004 (positioned at top)
1
112-5003-00
4 Coil Sleeve (Short) (Formost #10-7077)
1 545-5076-01
5 Spring Washer (17/32" ID X 3/4" X 1") 1 269-5002-00
6 Solid Plunger (Long) Assembly
1 515-7223-00
7 Compression (Relay) Spring
1 266-5022-01
8 #10-32 Adj. Spindle Stop w/Rubber Tip 1 280-5014-00
3
4
Item 8 is secured by: #10-32 Keps Nut (Qty. 1) (240-5208-00)
Ordering Note: If 500-5788-06 is unavailable, order the individual part(s) actually required
or try 500-57888-XX and changes it’s Solid Plunger with above
Solid Plunger (515-7223-00). PERIODICALLY CHECK THE
NYLON PLUNGER TOP FOR WEAR.
%DOO'HIOHFWRU:LGH3OXQJHU7RS$VVHPEO\,WHPV
6WRSVWKHEDOOLQWKH&HQWHU/DQH
1º ,1',9,'8$/ 3$57 1$0(
1
Ball Deflector Coil Mounting Bracket
47< 63, 3$57 1º
1
535-6857-02
Item 1 is secured below the playfield by: #8 X 1/2" HWH AB (Zinc) (Qty. 4) (234-5101-00)
Coil Retaining Bracket
1
535-5203-03
Item 2 is secured by: #8-32 X 1/4" PPH MS (Sems) Zinc (Qty. 2) (232-5300-00)
3 Coil, 26-1200
1 090-5044-00T
ORDERING ABOVE (ITEM 3) COIL PART Nº WILL INCLUDE:
— Diode, 1N4004 (positioned at top)
1
112-5003-00
4 Coil Sleeve (Short) (Formost #10-7077)
1 545-5076-01
5 Spring Washer (17/32" ID X 3/4" X 1") 1 269-5002-00
6 Solid Plunger Assembly
1 515-7230-00
7 Shaft Head (Removable)
1 530-5511-00
4
6HF'UDZLQJV
2
7RS
9LHZ
Item 7 is secured by: #10-32 X 3/8" PPH MS (Sems) (Qty. 1) (232-5401-00)
8
9
Compression (Relay) Spring
#10-32 Adj. Spindle Stop w/Rubber Tip
1
1
266-5022-01
280-5014-00
Item 9 is secured by: #10-32 Keps Nut (Qty. 1) (240-5208-00)
Ordering Note: If 500-5788-07 is unavailable, order the individual part(s) actually required
or try 500-57888-XX and changes it’s Solid Plunger with above
Solid Plunger (515-7230-00) and ORDER the "Removable" Shaft
Head (530-5511-00) & #10-32 X 3/8" Screw (232-5401-00) to add
to the bottom. The Shaft Head is not included with the Solid Plunger.
PERIODICALLY CHECK THE NYLON PLUNGER TOP FOR WEAR.
6HFWLRQ&KDSWHU
3DJH
'UDZLQJVIRU0DMRU
$VVHPEOLHV5DPSV
0DJD]LQH$VVHPEO\,WHPV
1RWVROGDVDQDVVHPEO\RUGHUWKHLQGLYLGXDOSDUWVDFWXDOO\UHTXLUHG
7RS
9LHZ
See securing hardware under Items in Parts Table.
6LGH
9LHZ
LP. 57
LP. 57
Qty. 4
LP. 56
LP. 57
Qty. 4
LP. 56
LP. 56
DASHED
LINE
Qty. 4
This game is supplied with 3 Sets of Photo Inserts. A: "No
Nudity", B: "Nudity Factory Suggested" and C: "Some Full
Nudity". 1 Set was installed at the Factory and the other 2 Sets are
packed with the game. Read the Instruction Sheet (756-5009-00)
which is provided with the Photo Insert Kit inside this game. For the
same 3 Sets, order Kit 502-5010-00, no other style Photo Inserts
are available.
Items 8-12, & AP-1: Plastics, Photo Inserts & Decal, are not
available individually. The entire Set(s) and/or Kit(s) must be
ordered. See Section 4, Chapter 1, Page 63 for Plastics & Decals.
Qty. 2
!
Qty. 4
7DNH1RWH
An asterisk (*) indicates item(s) are not noted in the pictorials.
*
47< 63, 3$57 1º
1º ,1',9,'8$/ 3$57 1$0(
1
Magazine Frame (Bracket)
1
535-9073-00
Item 1 is secured above the playfield onto Post by: #6-32 Nylon Stop Nut (Qty. 1)
(240-5005-00) and onto the Wood Rail by: #6 X 1/2" PTH A (Zinc) (Qty. 1) (237-5809-00)
2
3
4
5
6
7
Magzine Hinge
Magazine Hinge Pin
Spring (Torsion)
4" Cable Tie (secures Wiring to Frame)
#555 Wedge Base Socket (Laydown)
#555 Wedge Base Bulb (Clear)
1
1
1
2
4
4
535-9072-00
535-9071-00
267-5000-00
040-5001-01
077-5026-01
165-5002-00
Items 6 & 7 are secured to Item 1 above by: Rivet, 1/8" ø X .39" Zinc (Qty. 1/per)
(249-5018-00)
8
9
Clear Plastic -66 TO
Clear Plastic -67 TO
1
1
from
from
830-5989-XX
830-5989-XX
Items 8 & 9 are secured to Item 2 above by: Rivet, 1/8" ø X 3/16" Zinc (Qty. 2)
(249-5001-00) and #6 Lock Washer (Qty. 2) (246-5000-00)
Clear Plastic -65 (used as Impact Pads)
from 830-5989-XX
Item 10 is secured onto Items 8 & 9 by: Pop Rivet, 1/8" ø X .515" Lg. (Qty. 2)
(249-5018-01) and #4 Washer (Qty. 2) (242-5002-00)
10
11
2
Photo Insert -MC TC (1 Style Only)
1
from
502-5010-00
Item 11 is secured inbetween Items 8 & 9 by: See securing hardware under Item 9.
12
Photo Insert -TO (3 Styles A, B & C)
1
from
502-5010-00
Item 12 is secured on Item 1 above by: #4-40 X 3/8" PPH MS (Qty. 2) (237-5997-00) and
#4 Washer (Qty. 2) (242-5002-00) Ensure Photo Insert is under the Washers.
Items 8-12: READ "Availability Note" above Photo Inserts on ordering availabilty.
13* Wiring Harness & 4-Pin Connector
1
036-5477-09-76
If replacing sockets, desolder wiring (use above # if new wiring is required). Don’t
forget to ADD the lug insulators (Shrink Tubing, 605-5004-01 sold in 12" Lengths).
Qty. 2
1º $662&,$7(' 3$57 1$0(
AP-1* Decal -14 (Skill Shot Opens Magazine)
47< 63, 3$57 1º
1
from
820-6305-00
Items AP-1: READ "Availability Note" above Photo Inserts on ordering availabilty.
'UDZLQJVIRU0DMRU
$VVHPEOLHV5DPSV
6HFWLRQ&KDSWHU
3DJH
6HF'UDZLQJV
$YDLODELOLW\1RWH
5RWDWLQJ7ULDQJXODU%LOOERDUG$VVHPEO\,WHPV
$QRWKHU9LHZ3DUWV7DEOHFRQWLQXHVRQWKHQH[WSDJH
1RWVROGDVDQDVVHPEO\RUGHUWKHLQGLYLGXDOSDUWVDFWXDOO\UHTXLUHG
7RS
9LHZ
LP. 77
Qty. 2
per side
See securing hardware
under Items in Parts Table.
FL. 25
SW. 30, SW. 29
SW. 17
Qty. 2
Qty. 4
LP. 77
6HF'UDZLQJV
See Large
Views for
Plastics &
Photo Inserts
Locations.
6LGH
9LHZ
$YDLODELOLW\
1RWH
Read "Availability
Note" on the
next page.
SW. 17
4
YLD 5HOD\ %G
6HFWLRQ&KDSWHU
3DJH
'UDZLQJVIRU0DMRU
$VVHPEOLHV5DPSV
5RWDWLQJ7ULDQJXODU%LOOERDUG$VVHPEO\,WHPV&RQWLQXHG
'LIIHUHQW9LHZVRQWKHSUHYLRXVSDJH
1RWVROGDVDQDVVHPEO\RUGHUWKHLQGLYLGXDOSDUWVDFWXDOO\UHTXLUHG
'
9LHZ
LP. 77
See securing hardware under Items in Parts Table.
Qty. 4
FL. 25
Qty. 2
SW. 30,
SW. 29
$YDLODELOLW\1RWH
SW. 17
4 Items 16-24: Plastics and Photo Inserts,
are not available individually. The entire Set(s)
and/or Kit(s) must be ordered. See Section 4,
Chapter 1, Page 63 for Plastics & Decals.
YLD 5HOD\ %G
1º ,1',9,'8$/ 3$57 1$0(
1
Motor Platform Frame (Bracket) Black
47< 63, 3$57 1º
1
535-9040-00
Item 1 is secured above the playfield in the front by: #6-32 X 1/2" HWH Swage (Ser)
Zinc (Qty. 1) (237-5976-03) and #6 Washer (Qty. 1) (242-5001-00) and secured in the rear
by: #8-32 X 3/8" HWH TF (Qty. 2) (237-5903-00)
2
3
Rotor Platform Assy. (w/Shaft & "Barrels")
Motor 24v AC 50/60 Hz 12 RPM PB2 w/Conn.
1
1
515-7206-00
041-5086-02
Item 3 is secured to Item 1 by: #6-32 X 5/16" PPH TF (Zinc) (Qty. 2) (237-6096-00)
4
5
Wire Gate
Micro Switch (Short Flat Actuator)
1
1
535-9043-48
180-5190-28
Item 5 is secured to Item 1 by: #2-56 X 1/2" HWH Ser UNS #4HD TR3 BLK (Qty. 2)
(237-5937-02) and #2-56 Nylon Stop Nut (Qty. 2) (240-5321-00)
Micro Switch (Short Flat/Mid Bend Actuator)
Item 6 is secured to Item 1 by: #2-56 X 3/4" PPH (Zinc) (Qty. 2) (237-6064-00) and #2-56
Nylon Stop Nut (Qty. 2) (240-5321-00)
6
7
2
1/4" Clamp (Double)
1
180-5189-00
040-5000-23
Item 7 is secured to Item 1 by: #8-32 X 3/8" HWH MS Type C (Qty. 1) (237-5903-00) and
#8 Washer (Qty. 1) (242-5005-00)
8
9
10
#555 Wedge Base Socket (Laydown)
Light Reflector (Silver Plastic)
#555 Wedge Base Bulb (Clear)
1
1
1
077-5026-01
545-5409-01
165-5002-00
Items 8, 9 & 10 are secured to Item 1 by: #6-32 X 3/8" HWH Swage (Ser) Zinc (Qty. 1)
(237-5976-02)
11
12
#89 2-Lug Stand-Up Small Socket
#89 Bulb (Bayonet)
1
1
47< 63, 3$57 1º
,1',9,'8$/ 3$57 1$0(
White Nylon Bushing
1
545-5192-00
Item 13 is secured to Item 2 by: #6-32 X 3/8" HWH Swage (Ser) Zinc (Qty. 3)
(237-5976-02)
14
15
16
17
18
19
20
21
Rubber Grommet (Double Edged)
3/8" O.D. BLACK Rubber Ring
Clear Plastic -57 T1
Screened Plastic -26 T1
Clear Plastic -55 T2
Clear Plastic -56 T2
Clear Plastic -53 T3
Clear Plastic -54 T3
4
7
1
1
1
1
1
1
280-5015-00
545-5348-19
830-5989-XX
830-5988-XX
from 830-5989-XX
from 830-5989-XX
from 830-5989-XX
from 830-5989-XX
from
from
Items 16-21 are secured into Item 2 by: #6-32 X 3/4" PFH Black Oxide (Qty. 2/per)
(237-5836-01) with Item 15 (Qty. 1/per)
22
Screened Plastic -22
1
from
830-5988-XX
Item 22 is secured into Item 14 on Item 1 by: #8-32 X 1" Pem Self-Clinching Stud (Qty. 2)
(237-5867-16) and #8-32 Keps Nut (Qty. 2) (240-5104-00)
23
24
Photo Insert -T2 (3 Styles A, B & C)
Photo Insert -T3 (3 Styles A, B & C)
1
1
from
from
502-5010-00
502-5010-00
Item 23 is secured inbetween Items 18-19; Item 24 is secured inbetween Items 20-21.
Items 16-24: READ "Availability Note" above on ordering availabilty.
Wiring Harness & 2-Pin + 9-Pin CNs.
1 036-5477-16-76
077-5106-00 25*
If replacing sockets and/or switches, desolder wiring (use above # if new wiring is
165-5000-89 required). Don’t forget to ADD the lug insulators (Shrink Tubing, 605-5004-01 sold in
Items 11 & 12 are secured to Item 22 by: #6-32 X 1/2" PFH Black Oxide (Qty. 1)
(237-5843-00) and #6-32 Nylon Stop Nut (Qty. 1) (240-5005-00)
'UDZLQJVIRU0DMRU
$VVHPEOLHV5DPSV
1º
13
This game is supplied with 3 Sets of Photo
Inserts. A: "No Nudity", B: "Nudity Factory
Suggested" and C: "Some Full Nudity". 1
Set was installed at the Factory and the other
2 Sets are packed with the game. Read the
Instruction Sheet (756-5009-00) which is
provided with the Photo Insert Kit inside this
game. For the same 3 Sets, order Kit
502-5010-00, no other style Photo Inserts are
available.
12" Lengths).
6HFWLRQ&KDSWHU
3DJH
6HF'UDZLQJV
%DQN'URS7DUJHW$VVHPEO\,WHPV
$QRWKHU9LHZ3DUWV7DEOHFRQWLQXHVRQWKHQH[WSDJH
7RS
9LHZ
SW. 26
For Securing Hardware, see
the Parts Table on the next
page, under Item desired.
6LGH
9LHZ
)URQW
9LHZ
DOTS: The Switch Diode is
located on a Terminal Strip
under the playfield near this
assembly. See Section 5,
Chapter 2, Playfield Wiring,
Page 101, for more details.
Trip Coil
Not Required
SW. 26
4
6HF'UDZLQJV
For Securing Hardware, see
the Parts Table on the next
page, under Item 8.
6HFWLRQ&KDSWHU
3DJH
Item 20, Height Adjustment Screw,
moves Item 15 up or down. It’s secured
through Item 5. See Target Height
Adjustment Procedure on the next page.
'UDZLQJVIRU0DMRU
$VVHPEOLHV5DPSV
%DQN'URS7DUJHW$VVHPEO\,WHPV&RQWLQXHG
'LIIHUHQW9LHZVRQWKHSUHYLRXVSDJH
1º ,1',9,'8$/ 3$57 1$0(
1
2
Bracket Drop Target (Left Side)
Bracket Drop Target (Right Side)
47< 63, 3$57 1º
1
1
535-8746-00
535-8746-01
Items 1 & 2 are secured below the playfield by: #8 X 1/2" HWH AB (Zinc) (Qty. 3/per)
(234-5101-00)
3
4
5
6
7
8
Back Plate (1-Bank Drop Target)
Bracket, Support (1-Bank D/T)
Bracket, Height Adjustment
Bracket, Target Retainer (1-Bank D/T)
Bracket, Coil Housing
Bracket Cap, Coil Housing
1
1
1
1
1
1
535-7713-00
535-7712-00
535-7709-01
535-7728-00
535-7707-00
515-6533-00
Items 1-3, 5, 7-8 are secured to Item 4 by: #8-32 X 3/8" HWH Swg. (Qty. 16) (237-5975-00)
9 Coil, 27-1500
1 090-5004-00B
ORDERING ABOVE (ITEM 9) COIL PART Nº WILL INCLUDE:
— Diode, 1N4004 (positioned at bottom) 1
112-5003-00
10 Coil Sleeve
1 545-5709-00
11 Spring Washer (17/32" ID X 3/4" X 1") 1 269-5002-00
To order Items 7-11 assembled with securing hardware, use SPI Nº: 515-6535-01.
1º
12
13
47< 63, 3$57 1º
,1',9,'8$/ 3$57 1$0(
Bracket, Switch (1-Bank D/T)
Switch (D/T)
1
1
535-7710-00
180-5158-00
Item 13 is secured to Item 12 by: #4-40 X 5/8" HWH TF (Qty. 2) (237-5945-00)
14
Switch Diode, 1N4001
0
112-5001-00
1
1
535-7706-01
530-5410-00
See "Take Note" below.
15
16
Bracket, Target Lift (1-Bank D/T)
Plunger (Drive Coil)
Item 16 is secured to Item 15 by: #10-32 X 3/8" PPH (Sems) (Qty. 1) (232-5401-00)
To order Items 15-16 assembled with securing hardware, use SPI Nº: 515-6537-00.
17
18
Compression (Return) Spring
Drop Target White (Rollover Target)
1
1
266-5020-00
545-5533-01
Note: Individual Decal Not Available. The entire decal sheet must be ordered for
replacement. See Page 57 for part number.
19
20
Spring, Target Reset
Height Adj. Screw (#8-32 X 1" HWH)
1
1
265-5003-00
237-6003-00
Ordering Note: If 500-6440-11 is unavailable, order the individual part(s) actually required
or try 500-6440-01 and remove the Trip Coil & Bracket from Item 4 (Note: Item 5, Height Adj.
Bracket may differ slightly). Also, ensure the diode on the switch is soldered correctly.
7DNH1RWH
The Switch Diode, 1N4001, is not located on this assembly (nor
included); it’s located on a Terminal Strip under the playfield.
See Section 5, Chapter 2, Playfield Terminal Strips..., Page 101.
5HI$
3OD\ILHOG
,WHP
,WHP
7DUJHW+HLJKW$GMXVWPHQW3URFHGXUH
5HI$
,WHP
,WHP
,WHP
'UDZLQJVIRU0DMRU
$VVHPEOLHV5DPSV
7XUQ ,WHP LQ RU RXW WR
FDXVH ,WHP WR DGMXVW
WDUJHW KHLJKW XS RU GRZQ
,WHP
1. Adjust the height of the top of Item 18 (Rollover
Target) at .52" (+/- .01"), relative to Items 1 & 2
(Left & Right Side Brackets), as shown left.
Adjustment should be made with Item 18 (Drop
Target) in the DOWN POSITION.
Keep in Mind: This adjustment procedure should
have the TOP SIDE of Item 18 (Drop Target) "flush
to slightly above" the playfield surface after
reinstalling to the underside of the Playfield. This
will ensure a BALL TRAP is not created where the
ball can rest in the target hole above the playfield.
2. Using a Flat Head Screwdriver or a 1/4" Nut
Driver, loosen or tighten (turn in or out) Item 20
(Height Adjustment Screw) through Item 5 (Height
Adjustment Bracket) to raise or lower Item 15
(Target Lift Bracket) causing Item 18 (Drop Target)
to reach desired height as stated above.
6HFWLRQ&KDSWHU
3DJH
6HF'UDZLQJV
,WHP
&HQWHUIROG/RZHU$VVHPEO\,WHPV
7KLV$VVHPEO\ZRUNVLQ
1RWVROGDVDQ
FRQMXQFWLRQZLWKWKH
DVVHPEO\RUGHU
&HQWHUIROG8SSHU
WKHLQGLYLGXDO
$VVHPEO\1H[W3DJH
SDUWVDFWXDOO\
UHTXLUHG
See securing hardware
under Item 8 in Parts Table.
The Riser Bracket (Item 1) of the
Centerfold Upper Assembly (Next
Page) is shown for reference only
(demonstrates how these two (2)
Assemblies are put together). The
Links are secured onto the Panel
Assemblies by Retaining Rings.
See securing hardware
under Item 7 in Parts Table.
SW. 43
6HF'UDZLQJV
SW. 44
44
Qty. 2
1º ,1',9,'8$/ 3$57 1$0(
1
Motor Mounting Bracket
YLD '& %L'LUHFWLRQDO 5HOD\ %RDUG
47< 63, 3$57 1º
1
535-9062-00
Item 1 is secured below the playfield onto Item 1, Riser Bracket of the Upper
Assembly (Next Page) by: #8-32 Nylon Stop Nut (Qty. 2) (240-5102-00)
2
Motor 12v DC 10-12RPM
1
041-5075-04
Item 2 is secured to Item 1 by: #8-32 X 5/8" HWH MS (Serr) Zc TF (Qty. 1) (237-5951-00)
3
Stop Pin (8-32 X 15/16")
1
530-5609-00
Item 3 is secured to Item 1 by: #8-32 X 1 " HWH (Serr) Zinc (Qty. 1) (237-5946-00)
4
Dual Switch Bracket
1
535-9063-00
Item 4 is secured by: #8-32 X 5/8" HWH MS (Serr) Zinc TF (Qty. 2) (237-5951-00)
5
Micro Switch (Roller Actuator, Lite-Force)
2
180-5119-02
1º ,1',9,'8$/ 3$57 1$0(
6
Cam Assembly
1
6HFWLRQ&KDSWHU
3DJH
Link, Slotted (9 " w/Post Stud) Assy.
Item 8 is secured onto the Picture Link Pivot on Item 6 by: Retaining Ring, 3/16" ø Shaft
(Qty. 1) (270-5001-00)
Wiring Harness & 2-Pin Cn. (for Motor)
036-5477-10-76
If replacing motor, desolder wiring (use above # if new wiring is required). Don’t forget
to ADD the lug insulators (Shrink Tubing, 605-5004-01 sold in 12" Lengths).
9*
1
10* Wiring Harness & 4-Pin Cn. (for Sws.)
1
036-5477-11-76
If replacing motor, desolder wiring (use above # if new wiring is required). Don’t forget
to ADD the lug insulators (Shrink Tubing, 605-5004-01 sold in 12" Lengths).
Item 5 is secured to Item 1 by: #2-56 X 1/2" HWH (Sr) UNS #4HD TR3 BO (Qty. 6) (237-5937-02)
7DNH1RWH
515-7225-00
Item 6 is secured onto Motor Shaft by: #10-32 X 3/8" Soc. Hd. Cap Screw (Zinc) (Qty. 1)
(237-5845-00) Includes: Cam Hub (530-5606-00), Cam Pin (530-5607-00), Picture Link
Pivot (530-5610-00) and Cam Blade (535-9059-00).
47< 63, 3$57 1º
.
1 515-7226-00
Item 7 is secured onto the Cam Pin on Item 6 by: Link Spring (Qty. 1) (266-5070-00)
8 Link, Slotted (7/")
1 535-9061-00
7
*
An asterisk (*) indicates item(s) are not noted in the pictorials.
'UDZLQJVIRU0DMRU
$VVHPEOLHV5DPSV
&HQWHUIROG8SSHU$VVHPEO\,WHPV
1RWVROGDVDQDVVHPEO\RUGHUWKHLQGLYLGXDOSDUWVDFWXDOO\UHTXLUHG
7KLV$VVHPEO\ZRUNVLQ
FRQMXQFWLRQZLWKWKH
&HQWHUIROG/RZHU$VVHPEO\
3UHYLRXV3DJH
Qty. 3
The Links (Items 7 & 8) of the
Centerfold Lower Assembly
(Previous Page) are shown
"dashed" for reference only
(demonstrates how these two (2)
Assemblies are put together). The
Links are secured onto the Panel
Assemblies by Retaining Rings.
See
securing
hardware
under
Item 8
in the
Parts
Table
on the
Previous
Page.
Qty. 3
6HF'UDZLQJV
See securing hardware
under Item 1 in Parts Table.
$YDLODELOLW\1RWH
This game is supplied with 3 Sets of Photo Inserts. A: "No Nudity", B:
"Nudity Factory Suggested" and C: "Some Full Nudity". 1 Set was
installed at the Factory and the other 2 Sets are packed with the game.
Read the Instruction Sheet (756-5009-00) which is provided with the Photo
Insert Kit inside this game. For the same 3 Sets, order Kit 502-5010-00,
no other style Photo Inserts are available.
SW. 44
Items 7-14: Plastics, Photo Inserts & Decals, are not available individually. The
entire Set(s) and/or Kit(s) must be ordered. (Decals T4 & T6 are provided with the
Photo Insert Kit Set.) See Section 4, Chapter 1, Page 63 for Plastics & Decals.
1º ,1',9,'8$/ 3$57 1$0(
1
Riser Bracket
47< 63, 3$57 1º
1
535-9068-00
Item 1 is secured above the playfield by: #8 X 1/2" HWH AB (Zinc) (Qty. 1) (234-5101-00)
and is secured below the playfield onto Item 1, Motor Mounting Bracket of the Lower
Assembly (Previous Page) by: #8-32 Nylon Stop Nut (Qty. 2) (240-5102-00)
2
Panel (Middle) Mounting Bracket
1
535-9069-00
Item 2 is secured onto Item 1 by: #8-32 Nylon Stop Nut (Qty. 2) (240-5102-00)
3
4
5
Panel (Top) Mounting Assembly
Panel (Bottom) Mounting Assembly
Hinge Pin
1
1
2
515-7228-00
515-7229-00
535-9074-00
Item 5 is secured at left by: Pushnut, 1/16" Tinnerman PS 062032 (Qty. 1/per) (240-5334-00) and
Optional #4 Nylon Washer (Qty. 1) (242-5068-00) on lower Hinge Pin Right Side.
6
7
Panel Spring
Clear Plastic -61 T4
'UDZLQJVIRU0DMRU
$VVHPEOLHV5DPSV
1
1
266-5071-00
from
830-5989-XX
47< 63, 3$57 1º
1º ,1',9,'8$/ 3$57 1$0(
8
9
Clear Plastic -62 T5
Clear Plastic -63 T6
1
1
from
from
830-5989-XX
830-5989-XX
Items 7-9 are secured by: #6-32 X 1/4" PPH (Sems) Zinc (Qty. 2/per) (232-5200-00)
Decal -T4 (... Centerfold Multiball)
Item 10 is affixed to the back side of Item 12 as shown above.
3
from
820-6305-XX
Decal -T6 (... White Rabbit Head on Black)
Item 11 is affixed to the back side of Item 14 as shown above.
3
from
820-6305-XX
1
1
1
from
10
11
12
13
14
Photo Insert -T4 (3 Styles A, B & C)
Photo Insert -T5 (3 Styles A, B & C)
Photo Insert -T6 (3 Styles A, B & C)
502-5010-00
502-5010-00
from 502-5010-00
from
Items 12-14 are secured under Items 7-9 above respectively.
Items 7-14: READ "Availability Note" above on ordering availabilty.
6HFWLRQ&KDSWHU
3DJH
/HIW:LUH5DPS/HIW0LGGOH5DPSV,QGLYLGXDO3DUWV,WHPV
1º ,1',9,'8$/ 3$57 1$0(
Left Wire Ramp
Micro Switch (Roller Actuator, Lite Force)
1
2
47< 63, 3$57 1º
1
3
515-7232-00
180-5119-02
Item 2 is secured by: #2-56 X 1/2" HWH Serr (Qty. 2/per) (237-5937-02)
3® Steel Ramp (Left) Riveted Sub-Assy.
1
515-7245-00
For Individual Items use : Steel Ramp (Left, No Parts) (515-7196-00), Ramp Flap
(535-8986-00), Rivet, 1/8"ø X 3/16" Lg. (Qty. 2) (249-5001-00) and #6 Lock Washer (Qty. 2)
(246-5000-00).
4®
Steel Ramp (Cntr.) Riveted Sub-Assy.
1
515-7250-01
For Individual Items use : Steel Ramp (Center, No Parts) (515-7184-01), Ramp Flap
(535-8986-00), Rivet, 1/8"ø X 3/16" Lg. (Qty. 2) (249-5001-00) and #6 Lock Washer (Qty. 2)
(246-5000-00).
7DNH1RWH
®
"R" indicates Item noted is secured with rivet(s) as listed.
Qty. 2
Qty. 2
Qty. 2
Qty. 3
5
Roll-Under Gate & Switch Assembly
1
515-7206-00
6HF'UDZLQJV
For Individual Items use : Roll-Under Switch Mounting Bracket (Black) (535-9041-00),
Wire Gate (535-9043-48), Micro Switch (Short Flat Actuator) (180-5190-28), Switch Body
Protect Plate (535-6539-00), #2-56 X 1/2" HWH Sr (Qty. 2) (237-5937-02) and #2-56 Hex
Nut (Qty. 2) (240-5301-00).
6
Cross-Under Gate & Switch Assembly
2
Qty. 2
515-7231-00
For Individual Items use : Roll-Under Switch Mounting Bracket (Black) (535-9077-00),
Micro Switch (Long Flat Actuator) (180-5190-48).
Item 6 is secured by: #8-32 X 3/8" HWH MS Type C (Qty. 2/per) (237-5903-00)
7
Screened Plastic -27
1
from
830-5988-XX
Item 7 is secured to Item 5 by: #8-32 X 5/8" HWH Swage (Ser) Zc. (Qty. 2) (237-5975-03)
8
Screened Plastic -28
1
from
830-5988-XX
Item 8 is secured to Item 1 by: 3/8" X 3/8" Spacer Gray (Qty. 2) (254-5000-12) and
#6-32 X 3/4" PPH MS (Sems) Zinc (Qty. 2) (232-5204-00)
9
Clear Plastic -64
1
from
830-5989-XX
$YDLODELOLW\1RWH
Items 7-9: Plastics, are not available individually. The entire Set
must be ordered. See Sec. 4, Chp. 1, Page 63 for Plastics & Decals.
10
11
#555 Wedge Base Socket (Laydown)
#555 Wedge Base Socket (Offset)
2
2
077-5026-01
077-5029-00
Items 10 & 11 are secured to Item 7 by: Rivet, 1/8"ø X 3/16" Lg. (Qty. 1/per)
(249-5001-00) and #6 Lock Washer (Qty. 1/per) (246-5000-00).
12
13
14
15
16
#555 Wedge Base Bulb (Clear)
#555 Wedge Base Bulb (Red)
#555 Wedge Base Bulb (Yellow)
Light Reflector (Silver Plastic)
7/16" O.D. BLACK Rubber Ring
6HFWLRQ&KDSWHU
3DJH
2
1
1
2
2
165-5002-00
165-5054-02
165-5054-06
545-5409-01
545-5348-17
'UDZLQJVIRU0DMRU
$VVHPEOLHV5DPSV
5LJKW:LUH5DPS5LJKW5DPS,QGLYLGXDO3DUWV
Qty. 4
Qty. 2
Qty. 2
Qty. 2
1º ,1',9,'8$/ 3$57 1$0(
1 Right Wire Ramp
2® Steel Ramp (Right) Riveted Sub-Assy.
47< 63, 3$57 1º
1
1
515-7194-00
515-7250-00
7DNH1RWH
®
"R" indicates Item noted is secured with rivet(s) as listed.
3
Roll-Under Gate & Switch Assembly
1
515-7206-00
For Individual Items use : Roll-Under Switch Mounting Bracket (Black) (535-9041-00),
Wire Gate (535-9043-48), Micro Switch (Short Flat Actuator) (180-5190-28), Switch Body
Protect Plate (535-6539-00), #2-56 X 1/2" HWH Sr (Qty. 2) (237-5937-02) and #2-56 Hex
Nut (Qty. 2) (240-5301-00).
4
Cross-Under Gate & Switch Assembly
1
515-7231-00
For Individual Items use : Roll-Under Switch Mounting Bracket (Black) (535-9077-00),
Micro Switch (Long Flat Actuator) (180-5190-48).
Item 4 is secured by: #8-32 X 3/8" HWH MS Type C (Qty. 2/per) (237-5903-00)
5
Clear Plastic -69
1
from
830-5989-XX
$YDLODELOLW\1RWH
Item 5: Plastic, is not available individually. The entire Set must be
ordered. See Section 4, Chapter 1, Page 63 for Plastics & Decals.
6
7
8
9
#555 Wedge Base Socket (Laydown)
#555 Wedge Base Bulb (Clear)
Light Reflector (Silver Plastic)
Bracket, Dual Light Mounting (No Parts)
2
2
2
1
077-5026-01
165-5002-00
545-5409-01
535-9138-00
Item 9 is secured to Item 5 by: #6-32 X 3/8" PPH MS (Sems) Zinc (Qty. 2) (232-5201-00)
onto 2" X 1/4" Hex Spacer #6-32 Tap (Qty. 1/per) (254-5008-07)
10
Single Groove Jewel Post (Clear)
4
550-5034-01
Item 10 is secured to Item 5 by: #6-32 X 1 " PPH MS Zinc (Qty. 1/per) (232-5510-00)
and #6-32 Nylon Stop Nut (Qty. 4) (240-5005-00)
'UDZLQJVIRU0DMRU
$VVHPEOLHV5DPSV
6HFWLRQ&KDSWHU
3DJH
6HF'UDZLQJV
For Individual Items use : Steel Ramp (Left, No Parts) (515-7184-00), Ramp Flap
(535-8986-00), Rivet, 1/8"ø X 3/16" Lg. (Qty. 2) (249-5001-00) and #6 Lock Washer (Qty. 2)
(246-5000-00).
%DFN3DQHO'LVSOD\6WHSSHU0RWRU$VVHPEO\,WHPV
0RUH9LHZVRQWKHQH[WSDJH
Clamp
Doubled-Up
7RS
9LHZ
G.I.’s See Page 99.
Qty. 4
FL. 26
FL. 26
FL. 26
FL. 26
1RWVROGDVDQDVVHPEO\RUGHUWKH
LQGLYLGXDOSDUWVDFWXDOO\UHTXLUHG
Qty. 8
Qty. 8
FL.
26
Qty. 4
Clamp Doubled-Up
this side only.
Qty. 2
6HF'UDZLQJV
1º ,1',9,'8$/ 3$57 1$0(
SW. 52
Display Frame (Painted White)
7DNH1RWH
*
47< 63, 3$57 1º
1
535-9052-00
Back Panel Black Wood (No Parts)
1
525-5608-00
Mounting Plate
2
535-9053-00
Item 3 secures Motor Shaft & Screened Plastic -25 and is secured by:
#8-32 X 3/8" HWH MS Type-C (Qty. 4) (237-5903-00)
4
5
#555 Wedge Base Socket (Laydown)
#906 Wedge Base Bulb (Clear)
4
4
077-5026-01
165-5004-00
Items 4 & 5 are secured to Item 1: #6-32 X 3/8" HWH Swage (Serr) Zinc (Qty. 1/per) and
#6-32 Nylon Stop Nut (Qty. 1/per) (240-5005-00)
6
7
8A
#555 IDC Snap-On Socket No Diode
#555 Wedge Base Bulb (Clear)
HSI Stepper Motor Assembly
8
8
1
077-5216-01
165-5002-00
515-6794-00
Item 8 includes the Cable Wiring Harness & Connector. Item 8 is secured by Item 3
(onto shaft) and at sides by: #4-40 X 1/2" PPH (Sems) Zinc (Qty. 2) (237-5813-00) and
#4-40 Nylon Stop Nut (Qty. 2) (240-5303-00) Motor Spec: (041-5062-00) 1.4"ø
(Non-Captive Shaft) HSI #36864-12 (Unipolar) / Travel per Step = .004 Step Angle - 15° / 12v D.C. / 4.6W
8B
9
Qty. 4
Shaft 7"
3/8" O.D. BLACK Rubber Ring
6HFWLRQ&KDSWHU
3DJH
1
4
Qty. 2
Item 2 is secured to Item 1 at the top by: #8-32 X 7/8" HWH MS (Zinc) (Qty. 2)
(237-5890-00) and at the bottom sides by: #8 X 1/2" HWH AB (Zinc) (Qty. 2)
(234-5101-00) and bottom middle by: #8 X 1" HWH (Serr) Zinc (Qty. 1) (234-5105-00)
3
$
Item 1 is secured below the playfield in the middle by: #8 X 1/2" HWH AB (Zinc) (Qty. 2)
(234-5101-00) and at sides by: #8-32 X 5/8" HWH MS (Serr) Zinc TF (Qty. 4) (237-5951-00)
2
FL.
26
1
FL.
26
%
G.I.’s See Page 99.
4
4
4
FL.
26
530-5503-00
545-5348-19
1º
10
)URQW
9LHZ
An asterisk (*) indicates item(s)
are not noted in the pictorials.
47< 63, 3$57 1º
,1',9,'8$/ 3$57 1$0(
Micro Switch (Long Flat Actuator)
1
180-5190-48
Item 10 is secured by: #2-56 X 1/2" HWH Ser UNS #4HD TR3 BLK (Qty. 2) (237-5937-02)
and #2-56 Nylon Stop Nut (Qty. 2) (240-5321-00)
11
12
1 " Clamp (Harness Clip Open Tab)
1/4" Clamp (Harness Clip Open Tab)
5
2
040-5000-10
040-5000-03
Items 11 & 12 are secured on Item 1 by: #6-32 X 3/8" HWH Swage (Ser) Zinc (Qty. 1/per)
except where Item 10 is doubled-up used: #6-32 X 5/8" HWH Swage (Ser) Zinc (Qty. 1)
and #6-32 Nylon Stop Nut (Qty. 1/per) (240-5005-00)
13
14
15
16
Plastic Mirror
Clear Plastic -51 T8
Screened Plastic -25 T9
Clear Plastic -52 T9
1
1
1
1
820-6297-00
820-5989-XX
830-5988-XX
from 830-5989-XX
from
from
Items 13-16 are secured into Item 2 by: #8-32 X 1" PPH MS (Zinc) (Qty. 4) with Item 9
(Qty. 1/per)
17
18
Photo Insert -T8 (3 Styles A, B & C)
Photo Insert -T9 (3 Styles A, B & C)
1
1
from
from
502-5010-00
502-5010-00
Item 17 is secured inbetween Items 13-14; Item 18 is secured inbetween Items 15-16.
Items 14-18, : READ "Availability Note" above on ordering availabilty.
19* Wiring Harness & 7-Pin + 12-Pin CNs
1
036-5477-02-76
If replacing sockets, desolder wiring (use above # if new wiring is required). Don’t
forget to ADD the lug insulators (Shrink Tubing, 605-5004-01 sold in 12" Lengths).
If replacing IDC sockets, ensure the wires are reinserted correctly with proper contact.
'UDZLQJVIRU0DMRU
$VVHPEOLHV5DPSV
%DFN3DQHO'LVSOD\6WHSSHU0RWRU$VV\,WHPV&RQWLQXHG
0RUH9LHZV3DUWV7DEOHRQWKHSUHYLRXVSDJH
1RWVROGDVDQDVVHPEO\RUGHUWKHLQGLYLGXDOSDUWVDFWXDOO\UHTXLUHG
Qty. 8
Qty. 8
G.I.’s
See
Access
Page
99.
Hole
Qty. 4
Q19-Q21,
Q23
%
Qty. 4
FL.
26
$
Access
Hole
$YDLODELOLW\1RWH
SW. 52
Qty. 2
FL.
26
FL.
26
Access
Hole
FL.
26
Qty. 2
This game is supplied with 3 Sets of Photo Inserts.
A: "No Nudity", B: "Nudity Factory Suggested"
and C: "Some Full Nudity". 1 Set was installed at the
Factory and the other 2 Sets are packed with the game.
Read the Instruction Sheet (756-5009-00) which is
provided with the Photo Insert Kit inside this game. For the
same 3 Sets, order Kit 502-5010-00, no other style Photo
nserts are available.
Access
Hole
Items 14-18: Plastics and Photo Inserts, are not available individually.
The entire Set(s) and/or Kit(s) must be ordered. (Decals T4 & T6 are provided with
the Photo Insert Kit Set.) See Section 4, Chapter 1, Page 63 for Plastics & Decals.
'UDZLQJVIRU0DMRU
$VVHPEOLHV5DPSV
6HFWLRQ&KDSWHU
3DJH
6HF'UDZLQJV
'
9LHZ
????????????????8.21/<237,21$/ %DOO'HIOHFWRU$VVHPEOLHV4W\,WHPV
1º ,1',9,'8$/ 3$57 1$0(
Ball Deflector Coil Mounting Bracket
1
47< 63, 3$57 1º
1
535-6857-02
Item 1 is secured below the playfield by: #8 X 1/2" HWH AB (Zinc) (Qty. 4) (234-5101-00)
Coil Retaining Bracket
2
1
535-5203-03
7RS
9LHZ
Item 2 is secured by: #8-32 X 1/4" PPH MS (Sems) Zinc (Qty. 2) (232-5300-00)
$X[
3 Coil, 26-1200
1 090-5044-00T
ORDERING ABOVE (ITEM 3) COIL PART Nº WILL INCLUDE:
— Diode, 1N4004 (positioned at top)
1
112-5003-00
4 Coil Sleeve (Short) (Formost #10-7077)
1 545-5076-01
5 Spring Washer (17/32" ID X 3/4" X 1") 1 269-5002-00
6 Solid Plunger Assembly
1 515-6858-00
1 266-5022-01
7 Compression (Relay) Spring
8 #10-32 Adj. Spindle Stop w/Rubber Tip 1 280-5014-00
Item 8 is secured by: #10-32 Keps Nut (Qty. 1) (240-5208-00)
Ordering Note: If 500-5788-02 is unavailable, order the individual part(s) actually required.
AUX. 1
AUX. 2
AUX. 3
????????????????8.21/<237,21$/ 8S'RZQ3RVW$VVHPEO\,WHPV
1º ,1',9,'8$/ 3$57 1$0(
1
Up/Down Post Coil Mounting Bracket
47< 63, 3$57 1º
1
$
515-6840-00
Item 1 is secured below the playfield by: #8 X 1/2" HWH AB (Zinc) (Qty. 6) (234-5101-00)
Adjustment Spindle Stop Bracket
Coil Retaining Bracket
1
2
535-8303-00
535-7356-00
Items 2 & 3 are secured by: #8-32 X 3/8" Swage (Serr) Zinc (Qty. 2/per) (237-5975-00)
4 Coil, 23-1100 (ORG)
1 090-5030-00T
ORDERING ABOVE (ITEM 4) COIL PART Nº WILL INCLUDE:
— Diode, 1N4004 (positioned at top)
1
112-5003-00
5 Coil Sleeve (with extension)
1 545-5847-00
6 Spring Washer, 17/32" ID X 3/4" X 1"
1 269-5002-00
1 515-6844-00
7 Plunger & Shaft Assembly
ORDERING ABOVE (ITEM 7) SUB-ASSY. PART Nº WILL INCLUDE:
7A Ball Bumper Plastic (Top) Red
1
550-5029-02
7B* Roll Pin, 3/32" ø X 1/2" Long
1
251-5002-00
7C* Retaining Ring, 1/4" ø Shaft
1
270-5002-00
7D Plunger & Shaft Sub-Assembly
1
515-6841-00
7E Plunger Head
1
530-5511-00
7F #10-32 X 3/8" PPH MS (Sems) Zinc
1
232-5401-00
Ordering Note: If 515-6844-00 is unavailable, order the individual part(s) actually required.
Item 7D, part of Item 7, Plunger & Shaft Sub-Assembly, is 1 piece and cannot be ordered
separated.
8
9
Compression (Relay) Spring
#10-32 Adj. Spindle Stop w/Rubber Tip
1
1
266-5022-01
280-5014-00
'
7DNH1RWH
An asterisk (*) indicates item(s) are not noted in the pictorials.
'
(
)
6HFWLRQ&KDSWHU
3DJH
Item 9 is secured by: #10-32 Keps Nut (Qty. 1) (240-5208-00)
Ordering Note: If 500-6293-00 is unavailable, order the individual part(s) actually required.
*
$X[
6HF'UDZLQJV
2
3
'UDZLQJVIRU0DMRU
$VVHPEOLHV5DPSV
3OD\ER\)OLSSHU3DUW8SGDWHV
If your Playboy Pinball Game has Flippers which match the ones shown on Pages 74-75 in this Game Manual, the
following replacement parts are required (review the following additional pages with the new Flippers):
)RUHQWLUH)OLSSHUV
Replace 500-5944-14 with 500-6543-14 (Left)
Replace 500-5944-04 with 500-6543-04 (Right)
)RULQGLYLGXDOSDUWV
Replace Item 2, Flipper Bat Bushing (White Plastic), 545-5594-00 with
new Item 2, Flipper Bat Bushing (White Plastic), 545-5070-00*
* Note: The new plastic bushing has notch cut-outs and is slightly shorter in height on the bottom shaft end.
Replace Item 12, Plunger, Link & Pawl (Left), 515-6518-01 with
new Item FRP 2, Plunger, Link & Crank (Left) Assembly, 515-7203-01
Replace Item 12, Plunger, Link & Pawl (Right), 515-6518-00 with
new Item FRP2, Plunger, Link & Crank (Right) Assembly, 515-7203-00†
† Note: Use FRP2 to replace the entire assembled parts of 515-6518-00.
Replace Item 12A, Flipper Plunger/Link Sub-Assy., 515-6304-01 with
new Item 12, Flipper Plunger & Link Sub-Assy., 515-6304-03**
** Note: The new sub-assembly contains the new Plunger "Flipper" Link (old 545-5611-00, new 545-5611-01).
Replace Item 12B, Pawl (Mntg. Link) (Left) Sub-Assy., 515-6305-01 with
new Item 13, Crank Bar, 530-5070-02*** and new Item 14, Switch Actuator (LEFT) Sub-Assy., 515-7257-01***
*** Note: The new Crank Bar 530-5070-02 replaces the old Pawl (Left) 535-7271-01 contained in 515-6305-01.
Replace Item 12B, Pawl (Mntg. Link) (Right) Sub-Assy., 515-6305-00 with
new Item 13, Crank Bar, 530-5070-02*** and new Item 14, Switch Actuator (RIGHT) Sub-Assy., 515-7257-00***
*** Note: The new Crank Bar 530-5070-02 replaces the old Pawl (Right) 535-7271-00 contained in 515-6305-00.
Item 12C, Return Bracket, 535-7353-00 is no longer required as the new replacement is a part of the
new Item 14 (535-9038-00 for Right and 535-9038-01 for Left).
Item 12E, #10-32 X 1-1/4" Lg. Socket Head (Set Screw), 237-5950-01 is no longer required.
Item 12I, Washer, 242-5039-01 is no longer required.
Item 12J, Washer, 242-5038-00 is no longer required.
Item 12F, #10-32 X 7/8" Lg. Socket Hd (Set Screw), 237-5966-00 is now a quantity of 2.
All other flipper parts (and kits) are identical and can use the same part numbers.
Order the following Flipper Rebuild Parts for Easier Installation and $ave $:
When new parts for your 500-5944-14 Left Flipper become necessary,
order the Flipper (Left) Rebuild Kit, 500-6307-10, which includes Item 6, 10, 12, 13, 14 & 15
of the new Left Flipper, 500-6543-14.
When new parts for your 500-5944-04 Right Flipper become necessary,
order the Flipper (Right) Rebuild Kit, 500-6307-00, which includes Item 6, 10, 12, 13, 14 & 15
of the new Right Flipper, 500-6543-04.
Any questions, please call Technical Support at 1-800-542-5377 or eMail us at [email protected]
'UDZLQJVIRU0DMRU
$VVHPEOLHV5DPSV
1HZ)OLSSHU3DUWV8SGDWH
UHYLHZ,WHPV
6HFWLRQ&KDSWHU
6HF'UDZLQJV
Replace Item 12D, Flipper Link Bushing, 530-5139-01 with
shorter Bushing, 530-5139-00, used with Item 13 Crank Bar where the Set Screw joins it with the Flipper Link.
)OLSSHU/HIW$VVHPEO\,WHPV
DQG$VVRFLDWHG3DUW:KLWH)OLSSHU%DW6KDIW$VV\,WHP$3$
7R2UGHUWKH)OLSSHU/HIW5HEXLOG.LWDVNIRU3DUW1U
LQFOXGHV,WHPV
/HIW4
The coils may also
differ depending
on the game.
25*
$
For Securing Hardware, see the Parts
Table below, under the item desired.
%
%
$
6HF'UDZLQJV
1º ,1',9,'8$/ 3$57 1$0(
Flipper Base Plate (LEFT)
47< 63, 3$57 1º
See FRP1
1
Item 1 is secured below the playfield by: #10 X 1/2" HWH MS (Serr) Zinc ST (Qty. 8)
(237-5949-00) Ordering Note: Use Item FRP1, see the end of this Parts Table.
2
3
1º ,1',9,'8$/
13* Crank Bar
$3
$
47< 63, 3$57 1º
3$57 1$0(
1
530-5070-02
Item 13 requires: Bushing, .192" ø ID X .312" ø OD X .195" (Qty. 1) (530-5139-00)
Power (End of Stroke) Switch
1
14A
1
180-5149-00 14B
Item 3 is secured to Item 1 by: #6-32 X 5/8" HWH Swage (Ser.) Zc. (Qty. 2) (237-5976-04)
4
5
6*
14* ® Switch Actuator (LEFT) Sub-Assy.
1 515-7257-01
545-5070-00 ORDERING ABOVE (ITEM 14) SUB-ASSY. PART Nº WILL INCLUDE:
#6-32 X 3/8" HWH Swage (Ser.) Zc. (Qty. 3) (237-5976-02)
Flipper Bat Bushing (White Plastic)
Item 2 is secured to Item 1 by:
1
DEDICATED
SW. 02
25*
"R" indicates Item noted is secured with rivet(s) as listed.
Actuator & Spring Bracket (LEFT)
® Switch Actuator (White Plastic)
1
1
535-9038-01
545-5612-00
Item 14B is secured to 14A by: Rivet, 1/8" ø X 1/4" Lg. (Qty. 1) (249-5003-00)
535-7354-01 15* Set Screw: #10-32 X 7/8" Socket Hd. 2 237-5966-00
15 requires: #10 Split Lock Washer (Qty. 1/per) (244-5003-00) and #10-32 Nylon Stop
265-5035-00 Item
Nut (Qty. 1/per) (240-5203-00) Tool Required for Item 15: 5/32" or 4mm Allen Wrench
515-6308-01 Flipper Rebuild Parts for Easier Installation, $ave $:
#10-32 X 3/8" SHWH Swage (Serr) Zinc (Qty. 2)
Sw. Plate/Spring Return Brkt. (LEFT)
Flipper Return Spring
Coil Stop Bracket Sub-Assembly
1
1
1
Item 6 is secured to Item 1 by:
(237-5985-00) and #10 Split Lock Washer (Qty. 2) (244-5003-00)
7
8
Item 1,
Item 4,
and
Item 14 (14A)
(just the Bracket)
7DNH1RWH
®
The differences
between the
Left & Right
Flippers are:
Spring Washer (17/32" ID X 3/4" X 1")
Coil Support Bracket
1
1
269-5002-00
535-7356-00
Item 8 is secured to Item 1 by: #8-32 X 3/8" HWH Swage (Ser.) Zc. (Qty. 2) (237-5975-00)
Flipper Base Plate Kit (LEFT)
Includes Item 1 pre-threaded, with the
Securing Hardware for Items 2, 3, 6 & 8.
Plunger, Link & Crank (LEFT) Assy.
FRP2 Includes above Items 12, 13, 14 and 15
and is pre-assembled.
Flipper (LEFT) Rebuild Kit
FRP3 Same as FRP2, but also includes above
Items 6 & 10.
FRP1
515-6617-01
515-7203-01
Coil, 23-1100 (ORANGE) (Left)
1 090-5030-00T
ORDERING ABOVE (ITEM 9) COIL PART Nº WILL INCLUDE:
500-6307-10
— Diode, 1N4004 (positioned at top)
1
112-5003-00
10* Coil Sleeve
1 545-5388-00
11 Deflector Pad (Bumper)
1 545-5428-00
ASSOCIATED PARTS ARE NOT INCLUDED WITH THE ABOVE ASSEMBLY.
12* Flipper Plunger & Link Sub-Assy.
1 515-6304-03 1º $662&,$7(' 3$57 1$0(
47< 63, 3$57 1º
ORDERING ABOVE (ITEM 12) SUB-ASSY. PART Nº WILL INCLUDE:
WHITE Flipper Bat & Shaft (Plain)
12A Flipper Plunger with "Flat"
1
530-5349-01
1 515-5133-08-06
AP-A (Non-Knurled End) Assembly
12B Plunger "Flipper" Link
1
545-5611-01
Large Flipper BLACK Rubber Ring
Item 12B is secured to 12A by: Bushing, .16" ø ID X .281" ø OD X .187" (Qty. 1)
1 545-5277-00
9
(530-5532-00) and Spirol Pin ø 5/32" X 3/4" Lg. (Qty. 1) (251-5015-02)
6HFWLRQ&KDSWHU
1HZ)OLSSHU3DUWV8SGDWH
UHYLHZ,WHPV
'UDZLQJVIRU0DMRU
$VVHPEOLHV5DPSV
)OLSSHU5LJKW$VVHPEO\,WHPV
DQG$VVRFLDWHG3DUW:KLWH)OLSSHU%DW6KDIW$VV\,WHP$3$
The coils may also
differ depending
on the game.
$
5LJKW4
25*
For Securing Hardware, see the Parts
Table below, under the item desired.
DEDICATED
SW. 04
25*
%
$3
$
1º ,1',9,'8$/ 3$57 1$0(
1
Flipper Base Plate (RIGHT)
See FRP1
1
Item 1 is secured below the playfield by: #10 X 1/2" HWH MS (Serr) Zinc ST (Qty. 8)
(237-5949-00) Ordering Note: Use Item FRP1, see the end of this Parts Table.
2
3
Power (End of Stroke) Switch
"R" indicates Item noted is secured with rivet(s) as listed.
1º ,1',9,'8$/
13* Crank Bar
47< 63, 3$57 1º
3$57 1$0(
1
530-5070-02
Item 13 requires: Bushing, .192" ø ID X .312" ø OD X .195" (Qty. 1) (530-5139-00)
14A
1
180-5149-00 14B
Actuator & Spring Bracket (RIGHT)
® Switch Actuator (White Plastic)
1
1
535-9038-00
545-5612-00
Item 14B is secured to 14A by: Rivet, 1/8" ø X 1/4" Lg. (Qty. 1) (249-5003-00)
535-7354-00 15* Set Screw: #10-32 X 7/8" Socket Hd. 2 237-5966-00
15 requires: #10 Split Lock Washer (Qty. 1/per) (244-5003-00) and #10-32 Nylon Stop
265-5035-00 Item
Nut (Qty. 1/per) (240-5203-00) Tool Required for Item 15: 5/32" or 4mm Allen Wrench
515-6308-01 Flipper Rebuild Parts for Easier Installation, $ave $:
#10-32 X 3/8" SHWH Swage (Serr) Zinc (Qty. 2)
Sw. Plate/Spring Return Brkt. (RIGHT)
Flipper Return Spring
Coil Stop Bracket Sub-Assembly
1
1
1
Item 6 is secured to Item 1 by:
(237-5985-00) and #10 Split Lock Washer (Qty. 2) (244-5003-00)
7
8
®
1
Item 3 is secured to Item 1 by: #6-32 X 5/8" HWH Swage (Ser.) Zc. (Qty. 2) (237-5976-04)
4
5
6*
14* ® Switch Actuator (RIGHT) Sub-Assy. 1 515-7257-00
545-5070-00 ORDERING ABOVE (ITEM 14) SUB-ASSY. PART Nº WILL INCLUDE:
#6-32 X 3/8" HWH Swage (Ser.) Zc. (Qty. 3) (237-5976-02)
Flipper Bat Bushing (White Plastic)
Item 2 is secured to Item 1 by:
$
7DNH1RWH
47< 63, 3$57 1º
%
Spring Washer (17/32" ID X 3/4" X 1")
Coil Support Bracket
1
1
269-5002-00
535-7356-00
Item 8 is secured to Item 1 by: #8-32 X 3/8" HWH Swage (Ser.) Zc. (Qty. 2) (237-5975-00)
Flipper Base Plate Kit (RIGHT)
Includes Item 1 pre-threaded, with the
Securing Hardware for Items 2, 3, 6 & 8.
Plunger, Link & Crank (RIGHT) Assy.
FRP2 Includes above Items 12, 13, 14 and 15
and is pre-assembled.
Flipper (RIGHT) Rebuild Kit
FRP3 Same as FRP2, but also includes above
Items 6 & 10.
FRP1
515-6617-00
515-7203-00
Coil, 23-1100 (ORANGE) (Right)
1 090-5030-00T
ORDERING ABOVE (ITEM 9) COIL PART Nº WILL INCLUDE:
500-6307-00
— Diode, 1N4004 (positioned at top)
1
112-5003-00
10* Coil Sleeve
1 545-5388-00
11 Deflector Pad (Bumper)
1 545-5428-00
ASSOCIATED PARTS ARE NOT INCLUDED WITH THE ABOVE ASSEMBLY.
12* Flipper Plunger & Link Sub-Assy.
1 515-6304-03 1º $662&,$7(' 3$57 1$0(
47< 63, 3$57 1º
ORDERING ABOVE (ITEM 12) SUB-ASSY. PART Nº WILL INCLUDE:
WHITE Flipper Bat & Shaft (Plain)
12A Flipper Plunger with "Flat"
1
530-5349-01
1 515-5133-08-06
AP-A (Non-Knurled End) Assembly
12B Plunger "Flipper" Link
1
545-5611-01
Large Flipper BLACK Rubber Ring
Item 12B is secured to 12A by: Bushing, .16" ø ID X .281" ø OD X .187" (Qty. 1)
1 545-5277-00
9
(530-5532-00) and Spirol Pin ø 5/32" X 3/4" Lg. (Qty. 1) (251-5015-02)
'UDZLQJVIRU0DMRU
$VVHPEOLHV5DPSV
1HZ)OLSSHU3DUWV8SGDWH
UHYLHZ,WHPV
6HFWLRQ&KDSWHU
6HF'UDZLQJV
Item 1,
Item 4,
and
Item 14 (14A)
(just the Bracket)
7R2UGHUWKH)OLSSHU5LJKW5HEXLOG.LWDVNIRU3DUW1U
LQFOXGHV,WHPV
The differences
between the
Left & Right
Flippers are:
6HFWLRQ
6FKHPDWLFV7URXEOHVKRRWLQJ
7DEOHRI&RQWHQWV
&2,/6'(7$,/('&+$577$%/( x&KDSWHU%DFNER[:LULQJ %DFNER[,23RZHU'ULYHU%RDUG'HWDLOHG:LULQJ'LDJUDP
%DFNER[%RDUG/D\RXW:LULQJ'LDJUDP x&KDSWHU3OD\ILHOG:LULQJ
*HQHUDO,OOXPLQDWLRQ&LUFXLW'HWDLOHG:LULQJ'LDJUDP 3OD\ILHOG6ZLWFK:LULQJ'LDJUDP3OD\ILHOG/DPS:LULQJ'LDJUDP 3OD\ILHOG7HUPLQDO6WULSV)XVHV0LVF:LULQJ'HVFULSWLRQV/RFDWLRQV )OLSSHU&LUFXLW:LULQJ'LDJUDP x&KDSWHU&DELQHW:LULQJ
7UDQVIRUPHU3RZHU:LULQJ'LDJUDP &DELQHW&RLQ'RRU:LULQJ'LDJUDP 7URXJK8S.LFNHU'XDO2372%RDUGV
7KHRU\RI2SHUDWLRQ6FKHPDWLF&RPSRQHQW/D\RXW3DUWV 23727URXEOHVKRRWLQJ 7RS
7URXJK'XDO2372%RDUGV$OLJQPHQW7HVWVIRU/('/(' 'RW0DWUL['LVSOD\'LVSOD\&RQWUROOHU%G&RPELQHG'LVSOD\&RQQHFWLRQV 'LVSOD\3RZHU6XSSO\%RDUG6FKHPDWLF&RPSRQHQW/D\RXW3DUWV 'LVSOD\&RQWUROOHU%RDUG6FKHPDWLF 'LVSOD\&RQWUROOHU%RDUG&RPSRQHQW/D\RXW3DUWV ,23RZHU'ULYHU%RDUG7KHRU\RI2SHUDWLRQ ,23RZHU'ULYHU%RDUG6FKHPDWLF
6KHHW RI 6KHHW RI 6KHHW RI 6KHHW RI 6KHHW RI ,23RZHU'ULYHU%RDUG&RPSRQHQW/D\RXW ,23RZHU'ULYHU%RDUG3DUWV &386RXQG%RDUG7KHRU\RI2SHUDWLRQ &386RXQG%RDUG6FKHPDWLF
6KHHW RI 6KHHW RI 6KHHW RI &386RXQG%RDUG&RPSRQHQW/D\RXW &386RXQG%RDUG3DUWV 8.2QO\6ROHQRLG([SDQGHU3&%RDUG
6FKHPDWLF&RPSRQHQW/D\RXW3DUWV 6FKHPDWLFV
7URXEOHVKRRWLQJ
6HFWLRQ
3DJH
6HF6FKHPDWLFV
Visit www.SternPinball.com/schematics.htm for the latest 11" X 17" Schematics (or "Split 8-1/2" X 11") for the Display Power Supply, Display Controller, I/O Power
Driver & CPU/Sound Boards (White Star• System Only). Along with the schematics you’ll find the component layout and theory of operation. Keep visiting as these files
are continuously improved with more "search" links in the documents. The files are in PDF Format (Adobe® Reader required). They may be slow to open in the website only,
but once on your harddrive they’ll open fast. Inside the schematics you can utilize internal links where addresses may direct you to another sheet in the schematic set (further
instructions within documents). To "download" once open, in your browser click "File" "Send" "Page by eMail". It will be sent to your eMail Address, where there you can save
the file to your hardrive.
x&KDSWHU3ULQWHG&LUFXLW%RDUGV3&%V Use the below Coils Detailed Chart Table in conjunction with Sec. 5, Chp. 1, Backbox I/O Power Driver Board
Detailed Wiring Diagram (I/O Board Connectors J6, J7, J8 & J9) and Backbox Board Layout Wiring Diagram:
+LJK &XUUHQW &RLOV *URXS &2,/6'(7$,/('&+$577$%/(
Drive Transistor (D.T.)
Driver
Ouput Board
D.T. Control
Line Color
D.T. Control
Line Connect
Power
Line Color
Power Line
Connnection
Power
Voltage
Coil GA-Turn
or Bulb Type
26-1200
#1
TROUGH UP-KICKER
Q1
I/O Pwr. Drvr.
BRN-BLK
J8-P1
YEL-VIO
J10-P4/5
50v DC
090-5044-00T
#2
AUTO LAUNCH
Q2
I/O Pwr. Drvr. BRN-RED
J8-P3
YEL-VIO
J10-P4/5
50v DC
090-5022-00T
#3
BALL LOCK POST
Q3
I/O Pwr. Drvr. BRN-ORG
J8-P4
BRN
J7-P1
20v DC
#4
LEFT ORBIT POST
Q4
I/O Pwr. Drvr.
BRN-YEL
J8-P5
BRN
J7-P1
20v DC
090-5044-00T
#5
DROP TARGET
Q5
I/O Pwr. Drvr. BRN-GRN
J8-P6
YEL-VIO
J10-P4/5
50v DC
090-5004-00B
#6
CENTER LANE POST
Q6
I/O Pwr. Drvr.
BRN-BLU
J8-P7
BRN
J7-P1
20v DC
#7
BEAD SCREEN LEFT
Q7
I/O Pwr. Drvr.
BRN-VIO
J8-P8
YEL-VIO
J10-P4/5
50v DC
090-5044-00T
#8
BEAD SCREEN RIGHT
Q8
I/O Pwr. Drvr. BRN-GRY
J8-P9
YEL-VIO
J10-P4/5
50v DC
090-5044-00T
Coil GA-Turn
+LJK &XUUHQW &RLOV *URXS 23-700
27-1500
090-5004-00T
26-1200
27-1500
26-1200
090-5044-00T
26-1200
26-1200
Drive Transistor (D.T.)
Driver
Ouput Board
D.T. Control
Line Color
D.T. Control
Line Connect
Power
Line Color
Power Line
Connnection
Power
Voltage
Q9
I/O Pwr. Drvr.
BLU-BRN
J9-P1
YEL-VIO
J10-P4/5
50v DC
#10 RIGHT BUMPER
Q10
I/O Pwr. Drvr.
BLU-RED
J9-P2
YEL-VIO
J10-P4/5
50v DC
090-5044-00T
#11 BOTTOM BUMPER
Q11
I/O Pwr. Drvr. BLU-ORG
J9-P4
YEL-VIO
J10-P4/5
50v DC
090-5044-00T
#12 GROTTO EJECT
Q12
I/O Pwr. Drvr.
BLU-YEL
J9-P5
YEL-VIO
J10-P4/5
50v DC
#13 VUK
Q13
I/O Pwr. Drvr. BLU-GRN
J9-P6
YEL-VIO
J10-P4/5
50v DC
090-5044-00T
#14 MAGAZINE POST
Q14
I/O Pwr. Drvr.
J9-P7
J7-P1
20v DC
090-5036-00B
J10-P1/2
50v DC
J10-P1/2
50v DC
090-5030-00T
#9
LEFT BUMPER
26-1200
26-1200
26-1200
090-5044-00T
26-1200
24-940
#15 LEFT FLIPPER (50v RED/YEL)
Q15
#16 RIGHT FLIPPER (50v RED/YEL)
Q16
I/O Pwr. Drvr.
ORG-VIO
J9-P9
BRN
RED-YEL
GRY-YEL
RED-YEL
BLU-YEL
Drive Transistor (D.T.)
Driver
Ouput Board
D.T. Control
Line Color
D.T. Control
Line Connect
Power
Line Color
Power Line
Connnection
Power
Voltage
Coil GA-Turn
or Meter #
Q17
I/O Pwr. Drvr.
VIO-BRN
J7-P2
BRN
J7-P1
20v DC
090-5001-00T
Q18
I/O Pwr. Drvr.
VIO-RED
J7-P3
J7-P1
20v DC
Q19
I/O Pwr. Drvr.
RED
J7-P4
J16-P3
Q20
I/O Pwr. Drvr.
GRN
J7-P6
Mtr.
20v DC Stepr.
041-5062-00
20v DC Stepr. Mtr.
Q21
I/O Pwr. Drvr.
BLK
J7-P7
Q22
I/O Pwr. Drvr.
VIO-BLU
J7-P8
Q23
I/O Pwr. Drvr.
BLU
J7-P9
Q24
I/O Pwr. Drvr.
VIO-GRY
J7-P10
BRN
GRY-RED
to WHT
GRY-RED
to WHT
GRY-RED
to WHT
BRN
GRY-RED
to WHT
RED
J16-P7
Drive Transistor (D.T.)
Driver
Ouput Board
D.T. Control
Line Color
D.T. Control
Line Connect
Power
Line Color
Power Line
Connnection
Power
Voltage
#25 FLASH: TRIANGLE X1
Q25
I/O Pwr. Drvr.
BLK-BRN
J6-P1
ORG
J6-P10
20v DC
#26 FLASH: MIRROR X4
Q26
I/O Pwr. Drvr.
BLK-RED
J6-P2
ORG
J6-P10
#27 FLASH: BACK LT X1 BACK RT X1
Q27
I/O Pwr. Drvr. BLK-ORG
J6-P3
ORG
J6-P 10
Bulb
20v DC #906
165-5004-00
20v DC #906 Bulb
#28 FLASH: LT SLINGSHOT X1
Q28
I/O Pwr. Drvr.
BLK-YEL
J6-P4
ORG
J6-P10
#29 FLASH: RT SLINGSHOT X1
Q29
I/O Pwr. Drvr. BLK-GRN
J6-P5
ORG
J6-P10
Bulb
20v DC #906
165-5004-00
20v DC #906 Bulb
#30 FLASH: TRIPLE JACPOT X1
Q30
I/O Pwr. Drvr.
BLK-BLU
J6-P6
ORG
J6-P10
20v DC
#31 CENTERFOLD ON/OFF
Q31
I/O Pwr. Drvr.
BLK-VIO
J6-P7
BRN
J7-P1
Relay
20v DC DC
520-5066-00
(Motor)
20v DC
/RZ &XUUHQW &RLOV *URXS #17 LEFT SLINGSHOT
#18 RIGHT SLINGSHOT
#19 DROP SCREEN STEPPER #1
#20 DROP SCREEN STEPPER #2
#21 DROP SCREEN STEPPER #3
%$
%$
%$
#22 TRIANGLE BILLBOARD
#23 DROP SCREEN STEPPER #4
%$
#24 OPTIONAL COIN METER
BLU-BLK
26-1200
090-5044-00T
I/O Pwr. Drvr. ORG-GRY
J9-P8
J16-P3
J16-P3
J7-P1
J16-P3
23-1100
090-5030-00T
23-1100
23-800
23-800
090-5001-00T
041-5062-00
Mtr.
20v DC Stepr.
041-5062-00
Relay
Bd.
20v DC
520-5010-00
Mtr.
20v DC Stepr.
041-5062-00
5v DC Meter 5v
091-5000-00
D iode O n T erminal S trip (if noted)
/RZ &XUUHQW &RLOV *URXS 6HF6FKHPDWLFV
Drive Transistor (D.T.)
AUX 1: LEFT UP/DOWN POST
Q1
AUX 2: CENTER UP/DOWN POST
Q2
AUX 3: RIGHT UP/DOWN POST
Q3
6HFWLRQ
3DJH
Driver
Ouput Board
Sol. Expander
(Aux. Board)
Sol. Expander
(Aux. Board)
Sol. Expander
(Aux. Board)
165-5000-89
165-5004-00
165-5004-00
Q32
I/O Pwr. Drvr. BLK-GRY
J6-P8
BRN
J7-P1
#32 CENTERFOLD OPEN/CLOSE
1RWH ,Q 7HVW )ODVK /DPSV 0HQX )ODVK ,FRQ )ODVKHUV WHVWHG DUH DOO )ODVK /DPSV ORFDWHG EHWZHHQ 44 7KLV *DPH 44
$X[LOOLDU\ 8. 21/<
Bulb Type
#89 Bulb
D.T. Control
Line Color
D.T. Control
Line Connect
Power
Line Color
Power Line
Connnection
Power
Voltage
WHT
CN2-P5
BRN
J7-P1
20v DC
RED
CN2-P4
BRN
J7-P1
20v DC
ORG
CN2-P3
BRN
J7-P1
20v DC
#89 Bulb
165-5000-89
041-5075-04
Coil GA-Turn
26-1200
090-5044-00T
23-1100
090-5030-00T
26-1200
090-5044-00T
&RLOV'HWDLOHG
&KDUW7DEOH
Section 5
Chapter 1 of 4
(20v DC Low Power)
Backbox Wiring
Backbox I/O Power Driver Board Detailed Wiring Diagram
Q31
AUX
3
Q32
1 GND
Solenoid Expander
PC (Auxilliary) Board
(SPI: 520-5192-00)
Q17
For Replacement Cable Wiring Harness from CN1 (Sol. Exp. Bd.) to
J3 (I/O Bd.) use SPI Part Number: 036-5479-00-76
Q18
FROM
7
8
16v AC
J7
J17P6
I/O BD.
BRIDGE 2
20V LOW
CURRENT
COILS
Q19
Q20
Q21
GND
FROM
BRDG 2
RED-WHT
Q22
Transformer
16v AC
5A
Slo-Blo
J17P7
I/O BD.
Q23
F7
Q24
FROM
BLU-WHT
Transformer
13v AC
Q1
Q3
J13P10
I/O BD.
BRDG 20
BLU-WHT
J8
Transformer
FROM
13v AC
BLU
8A
Slo-Blo
J17P9
I/O BD.
LAMP COLUMNS
+18v DC
Q4
Q5
F22
Q6
Q1-Q16
STP20N10L
110-0106-00
Note: All Coils require diodes.
Some diodes may be located on
Terminal Strips & not on the coil itself.
For the Playfield Terminal Strips,
Fuses & Misc. Wiring Descriptions &
Locations, see Section 5, Chapter 2,
Playfield Wiring.
BRIDGE 1
50V HIGH
CURRENT
COILS
F6
FROM
BLK-YEL
GND
48v AC
Q9
For the General
Illumination (G.I.)
Circuit Detailed
Wiring Diagram,
see Sec. 5, Chp. 2,
Playfield Wiring.
Q10
Q11
J9
7A
Slo-Blo
AC Voltages IN
Q8
Q17-Q32
TIP122
110-0067-00
D iode
On
T erminal
S trip
J11P3
I/O BD.
Q7
Q12
Q13
3A
Slo-Blo
Q14
BRDG 1
F21
J11P2
I/O BD.
FROM
BLK-ORG
AC Voltages IN
48v AC
Backbox
Wiring
3A
Slo-Blo
F20
Q15
Q16
FOR
MAGNET(S)
IF USED
J10
BLK-BLU
Bulb X1
BLK-VIO
#31 Centerfold
On/Off
BLK-GRY
#32 Centerfold
Open/Close
J7 1
BRN 20V DC LOW POWER .
3
4
6
7
8
9
10
J8 1
4
5
6
7
8
9
J9 1
2
4
5
6
7
8
9
J10 1, 2
3
4, 5
(SPI: 041-5075-04)
S
Centerfold
Motor
DC Bi-Directional
Relay Board
(SPI: 520-5066-00)
FROM
VIO-BRN
VIO-RED
23-800
23-800
Power Out
+12v DC
J16P3
I/O BD.
#17 Left
Slingshot
D
O
T
S
#18 Right
Slingshot
D
O
T
S
D
O
T
S
Diodes (1N4004) are
D iode
located on Terminal Strips
On
the playfield.
T erminal below
See Section 5,
S trip
Chapter 2, Playfield wiring
D
O
T
S
for location and details.
RED VIO-ORG
#19 Drop Screen
Stepper #1
GRN VIO-YEL
#20 Drop Screen
Stepper #2
RED
Stepper
Motor
(SPI: 041-5062-00)
BLK VIO-GRN
#21 Drop Screen
Stepper #3
VIO-BLU
#22 Triangle
Billboard
BLU VIO-BLK
#23 Drop Screen
Stepper #4
If used, located in Cabinet.
(VIO-GRY)
BRN-BLK
002002
COIN METER
26-1200
BRN-RED
23-700
BRN-ORG
27-1500
BRN-YEL
26-1200
BRN-GRN
27-1500
BRN-BLU
26-1200
BRN-VIO
26-1200
BRN-GRY
BLU-BRN
26-1200
26-1200
BLU-RED
26-1200
BLU-ORG
26-1200
BLU-YEL
26-1200
BLU-GRN
26-1200
BLU-BLK
24-940
ORG-GRY
23-1100
ORG-VIO
23-1100
Haydon
Nº 36864-12
BLK
GRN
WHT
BLU
FROM
#24 Optional
Coin Meter
YEL-BLK
J16P8
I/O BD.
#1 Trough
Up-Kicker
Voltage Outputs
FROM
RED
#2 Auto Launch
3
COMM.
1
GRY-RED
ORG 20V DC LOW POWER .
2
BLU
N.C.
4
Power Out
+5v DC
#3 Ball Lock
Post
#4 Left Orbit
Post
#5 Drop Target
(1-Bank)
#6 Center Lane
Post
#7 Bead Screen
Left
#8 Bead Screen
Right
#9 Left
Bumper
#10 Right
Bumper
#11 Bottom
Bumper
#12 Grotto
Eject
24v DC
J10P10
I/O BD.
:
GND
FROM
#30 Flash: Triple
Jackpot X1
PI
Q2
#906
#89
Bulb X1
N.O.
3
(S
BRIDGE 20
CONTROLLED
LAMPS
BLK-GRN
COMM.
5
le 0)
ng r -0
ia to 030
Tr Mo41-5
0
J17P8
I/O BD.
#29 Flash: Rt
Slingshot X1
10
WHT-RED
Transformer
#89
#906
Bulbs X1
N.C.
3
Relay Board
(SPI: 520-5010-00)
COMM WHT
N.C.
N.U.
N.O.
J11P2
I/O BD.
FROM
FROM
BRN
BLK-ORG
+20v DC
J7P1
I/O BD.
24v AC
Voltage Outputs
AC Voltages
#13
VUK
YEL-VIO 50V DC
#14 Magazine
Post
#15 Left
Flipper
#16 Right
Flipper
GRY-YEL
BLU-YEL
3A
Slo-Blo
3A
Slo-Blo
These coil Fuses are
located under playfield
NEAR assembly, see
Section 5, Chapter 2,
Playfield Wiring.
RED-YEL 50V DC HIGH POWER .
YEL-VIO 50V DC HIGH POWER .
Section 5, Chapter 1
Page 97
Sec. 5: Backbox ...
26-1200
AUX
2
6
BLK-YEL
BLU-WHT
N.O.
4
S
3 ORG
Right
Up/Down Q3
Post
Q30
#28 Flash: Lt
Slingshot X1
RED
Post
AUX
1
5
#89
#906
BLK-ORG Bulbs X2
BRN
WHT
J2
23-1100
Q29
4
#27 Flash: Back
Lt X1 Back Rt X1
BLK-VIO
VIO-BLU (FROM J7-P8)
J6
Q28
#89
#906
7
24v DC 10A DPDT
For UK USE ONLY
See Sec. 5, Chp. 4, (UK Only) Solenoid Expander PC Board,
Schematic,Component Layout & Parts, for more details.
#26 Flash:
Mirror X4
BLK
3
6
(On/Off)
GRN
Q27
#89
#906
Bulbs X4
Q26
(Skill Shots: Left & Right Up/Down Posts, and Center Up/Down Post)
26-1200
BLK-BRN
BLK-RED
#25 Flash:
Triangle X1
BLU
2
#906
#89
Bulb X1
Q25
J2 & J3 Optional use of a Printer Interface,
see Sec. 5, Chp. 3, Cabinet / Coin Door Wiring Diagram
FROM
10
J7BRN
9
P1
Low Power
8
I/O
BD.
+20v DC
7
CN1
CN2
6
5
Left
5 WHT
3 ORG-BLK 4 Up/Down Q1
Post
2 ORG-RED 2
1 ORG-BRN 1
Center
4 RED
Up/Down Q2
BLK-GRY
BRN 20V DC LOW POWER .
J6 1
Partial View
I/O Power Driver Board
520-5137-01
BRN
(Reverse)
5
4
3
J6
FLASH
LAMPS
10
BLK-BRN
BLK-RED
BLK-ORD
BLK-YEL
BLK-GRN
BLK-BLU
BLK-VIO
BLK-GRY
KEY (P-9)
ORG +20v DC
1
5
10 9 8 7 6 5 4 3 2 1
9 8 7 6 5 4 3 2 1
2
1
10
J7
LOW CURRENT
SOLENOIDS
BRN +20v DC
VIO-BRN
VIO-RED
RED * VIO-ORG
KEY (P-5)
GRN* VIO-YEL
BLK* VIO-GRN
VIO-BLU
BLU* VIO-BLK
VIO-GRY
{Opt. Coin Meter}
BRN-BLK
KEY (P-2)
BRN-RED
BRN-ORG
BRN-YEL
BRN-GRN
BRN-BLU
BRN-VIO
BRN-GRY
9 8 7 6 5 4 3 2 1
3
1
9
J8
BLU-BRN
BLU-RED
KEY (P-3)
BLU-ORG
BLU-YEL
BLU-GRN
BLU-BLK
ORG-GRY
ORG-VIO
10 9 8 7 6 5 4 3 2 1
6
1
9
J9
HIGH CURRENT
SOLENOIDS
J10
VOLTAGE
OUTPUTS
J17
7
8
9
POWER FROM THE
TRANSFORMER
J11
AC
VOLTAGES
1
10
J16
RED-YEL +50v DC
RED-YEL +50v DC
VIO-YEL +50v DC
YEL-VIO +50v DC
YEL-VIO +50v DC
KEY (P-6) .
BLK (GND).
BLK (GND).
BLK (GND).
BLK-YEL 24v AC
BLK-YEL 48v AC
10
RED-BRN
RED-BLK
RED-ORG
RED-YEL
RED-GRN
RED-BLU
KEY (P-7)
RED-VIO
RED-GRY
RED-WHT
RED
N/C
12
12 11 10 9 8 7 6 5 4 3 2 1
7
1
LAMP
ROWS (GND)
J13
LAMP
COLUMNS (18v)
3
YEL
YEL-WHT
YEL
YEL-WHT
YEL
YEL-WHT
2
BLK-ORG 48v AC
J12
J15
J14, Pins
1-6 are all
5.7v AC
6
YEL-BLK 24v AC
3
1
4
5
2
3
HIGH CURRENT
SOLENOIDS
I/O POWER DRIVER BOARD
520-5137-01
J2
20
J1
RIBBON CABLE
1
2
POWER
OUT
15
14
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
9 1
5
1
5
10 9 8 7 6 5 4 3 2 1
2
1
8
TO DOT MATRIX DISPLAY
1
RIBBON CABLE
RIBBON CABLE
J2
J1
26
25
2
NOT USED
SWITCH 2
SWITCH 4
SWITCH 6
SWITCH 8
DATA 1
DATA 3
DATA 5
DATA 7
RESET
STAT Ø
STAT 2
BUSY
RED
NOT USED
SWITCH 1
SWITCH 3
SWITCH 5
SWITCH 7
DATA Ø
DATA 2
DATA 4
DATA 6
STROBE
NOT USED
STAT 1
STAT 3
RED
DISPLAY CONTROLLER BD.
520-5055-03
J3
3
3 2 1
2
1
GND BLK
KEY (P-2)
+5v DC RED
1
FROM CPU-SOUND
CN8
1
Located
behind
the Dot
Matrix
Display
1
2
5
*J7: Wire Colors in Pins-4, -6, -7 & -9 are
for this game only. Normal Wire Colors
for these Pins are VIO-ORG, VIO-YEL,
VIO-GRN & VIO-BLK respectively.
AUXILLIARY
OUT PORT
1
4
10
1 2 3 4 5 6 7 8 9 10
2
19
7
DISPLAY
POWER
SUPPLY BD.
520-5138-00
CN1
From
Xfrmr.
4
14
6
RED
+5v DC
BLU
+18v DC
KEY (P-5)
BLK (GND)
WHT COM .110v AC
BLK-RED 110v AC
WHT-GRN 88v AC
Sec. 5: Backbox ...
{
6
J14
G.I.'s FROM
TRANSFORMER
13
5
CN1
7
Printer
Audio
Audio
8
4
CN2
7
BLK (GND)
KEY (P-14)
N/C
BLK (GND)
BLK (GND)
BLK (GND)
BLK (GND)
RED
+5v DC
N/C
+5v DC
RED
+5v DC
RED
+5v DC
RED
+5v DC
GRY-RED +12v DC
GRY-WHT +12v DC
BLK-WHT -12v DC
2
3
16v AC
13v AC
GROUND
GROUND
GROUND
GROUND
GROUND
GROUND
NOT USED
2
CN2
From
I/O Bd.
16v AC
8v AC
8v AC
RED
GRY-WHT (GND)
1
9v AC
GRY
13v AC
BLU-WHT
19v AC
GRY-GRN
1
3
1
J2-P1 -P2 & -P3 Required
for Solenoid Expander
PC Board
DISPLAY ENABLE
ROW DATA
ROW CLOCK
COL. LATCH
PIX CLOCK
SER. DATA
NOT USED
1
RED-WHT
RED
VIO
GRN
YEL
BRN-WHT
KEY (P-5)
WHT-VIO
WHT-GRN
WHT-YEL
WHT-BRN
YEL-BLK -110v DC
GRY-YEL -98v DC
KEY (P-3)
YEL (GND)
BLK (GND)
RED
+5v DC
BLU
+12v DC
VIO-YEL +68v DC
{
J5
J4
J2 and/or J3
used for Optional
Printer Interface
Connection
and Tournament
Kit Connections
GENERAL
ILLUMINATION (G.I.'s)
{
YEL-WHT
YEL-BLK
KEY (P-5)
RED-WHT
RED-BLK
N/C
N/C
POT
1
CN4 To
Speaker(s)
CN2 To
Display
RED +5v DC
BLK (GND)
BLK-WHT-12v
DC
N/U
KEY (P-5)
GRY-WHT+12v
DC
{
6 5 4 3 2 1
1
5
6 5 4 3 2 1
1
5
6
CN5
CN3
NOT USED
SP2 SP1
7 6 5 4 3 2 1
7
1
CN1
SOUND
POWER
CN2
CN6
RIBBON CABLE
CPU/SOUND BD. MONO
520-5136-16
CN7
SWITCH ROWS
(RETURNS)
12
5
9
2
SWITCH COLUMNS
(DRIVES)
1 2 3 4 5 6 7 8 9
CN5 To
Cabinet &
Playfield
RED
WHT-RED
BLU-WHT
CN4
SP3
1
{
GRN-GRY
GRN-VIO
GRN-BLU
GRN-BLK
GRN-YEL
GRN-ORG
GRN-RED
KEY (P-2)
GRN-BRN
ORG-WHT
ORG-GRY
ORG-VIO
ORG-BLU
ORG-GRN
ORG-YEL
KEY (P-4)
ORG-BLK
ORG-RED
ORG-BRN
CN8
1
BLK-RED
BLK
GRY-BLK
GRY-VIO
GRY-BLU
N/C
GRY-YEL
KEY (P-5)
GRY-ORG
GRY-RED
GRY-BRN
BLK
26
25
TO PLASMA
CONTROLLER
1
4
1 2 3 4 5 6 7 8 9 10
DEDICATED INPUTS
(SWITCH TO GROUND)
10
2
1
1 2 3 4 5 6 7 8 9 10 11 12
BLK
UK ONLY{ WHT-BRN
WHT-RED
WHT-ORG
WHT-YEL
WHT-GRN
KEY (P-4)
WHT-BLU
WHT-VIO
UK ONLY{ WHT-GRY
1 2 3 4 5 6 7 8 9
}
1
RED
{
{
6
CN7 From
Cabinet &
Playfield
NOT USED
NOT USED
+18v
BLU DC
YEL-BRN
YEL-RED
YEL-ORG
YEL-BLK
YEL-GRN
YEL-BLU
YEL-VIO
KEY (P-2)
YEL-GRY
TO DISPLAY CONTROLLER
J1
1 2 3 4 5 6 7 8 9 10 11 12
PINK-WHT
BLU-WHT
GRN-WHT
BRN-WHT
PINK
GRY
VIO
BLU
GRN
YEL
ORG
BRN
J3
When connecting any Ribbon Cable, always ensure
the "Red Line" side of the ribbon cable goes to the
Pin-1 side of any Dual 0.1" Header Connector.
AUXILLIARY
IN PORT
12
Important Note:
10 9 8 7 6 5 4 3 2 1
9
1
Backbox Board Layout Wiring Diagram
Section 5, Chapter 1
Page 98
Backbox
Wiring
Section 5
Chapter 2 of 4
Playfield Wiring
General Illumination Circuit Detailed Wiring Diagram
G.I. RELAY
I-O POWER
DRIVER BOARD
520-5137-01
8
5
X
6
20v DC
D0 3
R254
U206
74HCT273
Data
Latch
Transformer
D229
1N4004
Diode
2
1Q
1D
1K W
YEL
1
3
2
4
YEL
YEL-WHT
YEL-WHT
YEL-WHT
Bottom of Playfield
Shown as if leaning up against the
Backbox.
1
G.I. 5.7v AC
INPUT
FROM
XFRMR
2
3
General Illumination
(G.I.) Bulbs (5.7v AC)
5A 250v SLO-BLO Fuses
F27 F26 F25 F24
4
5
6
Y
Y
3
2
1
WHT-BRN
4
WHT-YEL
Y
5
J15-P6 to J15-P1 (Fuse F24)
B = BRN-WHT to WHT-BRN
Location: In Cabinet. (Light Bd. X10)
WHT-BRN
Y
Circuit
Y
1
BRNWHT
#1
#2
Y
10 ea.
#44 Bulb
Y
Y
G
6
WHT-GRN
GRN
tied to
YEL
7
WHT-VIO
G
8
BRN-WHT
G
GRN
tied to
YEL
9
YELLOW
J15
GREEN
J14
VIOLET
Secondary
5.7v AC
YEL
Primary
7
RELAY
DRIVER
PRI-103.5-115-207-230V
50/60Hz 750VA
CLASS 130 EPBO
G
Q200
2N3904
Transistor
#10*
Note: Various Colors, see
Page 62 for Part Numbers.
J15-P7 to J15-P2 (Fuse F25)
Y = YEL to WHT-YEL
Location: Lwr. & Mid. Rt. Playfield X9
+ Outlanes X4
Outlane
WHT-YEL
2
GIs in Cabinet (Light Board X10)
YEL
2
#1
#1
#2
to YEL
4 ea.
13
ea.
#44 Bulb
CircuitCircuit
B B B B B B B B B B
9 ea.
#44 Bulb
WHT-GRN GIs tied
for Outlanes x4
#13* #13*
#12
GRN
V
Y
Circuit
V
GRN
V
V
V
V
G
YEL
#17*
J15-P9 to J15-P4 (Fuse F27)
Location: Mid. & Upper Playfield X13
WHT-VIO
V
This Edge is “Upper Playfield”. Bottom Assemblies Not Shown for clarity.
X2
#16
V = VIO to WHT-VIO
Circuit
G
V
Wiring
Harness
Connector
G
V
V
#1
On Coin
Door
VIO
4
#1
#2
13 ea.
#44 Bulb
V
G
G
G G
3
Coin
Door
#13*
Note: GI above P/F is #555 Bulb.
* G.I. Bulb quantities may change during production.
G G G G
Playfield X2
Wiring
X2 X2
Section 5, Chapter 2
Page 99
Sec. 5: Playfield ...
V
2 ea.
#555 Bulb
V
15 ea.
#44 Bulb
J15-P8 to J15-P3 (Fuse F26)
G = GRN to WHT-GRN
Location: Upr. Rt. P/F X7 & Backpanel X8
+ Coin Door X2
WHT-GRN
YEL-WHT
Playfield Switch Wiring Diagram
Note: All Switch, Lamp & Coil assemblies require diodes. Some diodes are located
under the playfield on Terminal Strips or Diode Boards and not on the assemblies.
D
O
T
S
For Switch(es):
26 & 35
D iode
On
T erminal -orS trip
D
O
D
B
Switch
Drive
Transistor
Source N º :
2N3904
D iode
On
D iode
B oard
COLUMN
DRIVE
1
2
3
4
Switch 9
Switch 17
Switch 25
Switch 33
Switch 41
Switch 49
Switch 57
Switch 2
Skill
Shot
Switch 10
Right Ramp
Enter
Switch 18
Pop Bumper Exit
Switch 26
Surprise
Pkg. Target
Switch 34
Left Ramp
Enter
Switch 42
Left
Bumper
Switch 50
Left
Outlane
Switch 58
4th
Coin Slot
Switch 3
Right
Orbit
Switch 11
Right Ramp
Exit
Switch 19
Drop
Target
Switch 27
Grotto
Eject
Switch 35
Left Ramp
Exit
Switch 43
Right
Bumper
Switch 51
Left
Return Lane
Switch 59
6th ]
Coin Slot
Switch 4
4-Ball Trough
#1 (Left)
Switch 12
Center
Lane
Switch 20
Left
Orbit
Switch 28
VUK
Switch 36
Centerfold
1 (Closed)
Switch 44
Bottom
Bumper
Switch 52
Left
Slingshot
Switch 60
Right
Coin Slot
Switch 5
4-Ball
Trough #2
Switch 13
Not
Used
Switch 21
Not
Used
Switch 29
Not
Used
Switch 37
Centerfold
2 (Open)
Switch 45
Tease
Screw Limit
Switch 53
Right
Outlane
Switch 61
2
Center Coin
Slot / DBA
Switch 6
4-Ball
Trough #3
Switch 14
Center Ramp
Exit
Switch 22
Triangle
Mech 1 (Rt.)
Switch 30
Not
Used
Switch 38
Not
Used
Switch 46
Tournament
Button
Switch 54
Right
Return Lane
Switch 62
4
Left
Coin Slot
Switch 7
4-Ball Trough
VUK Opto
Switch 15
Left Top
Lane
Switch 23
Triangle
Mech 2 (Lt.)
Switch 31
Ramp Ball
Lock 3
Switch 39
Not
Used
Switch 47
Start
Button
Switch 55
Right
Slingshot
Switch 63
6
5th ]
Coin Slot
Switch 8
4-Ball Stacking Opto
Switch 16
Middle Top
Lane
Switch 24
Not
Used
Switch 32
Ramp Ball
Lock 1
Switch 40
Not
Used
Switch 48
Not
Used
Switch 56
Not
Used
Switch 64
Right Button
Shooter
Lane
Right Top
Lane
Switch 1
Left Button
] Future
Expansion
(UK ONLY)
] Future
Expansion
5
(UK ONLY)
D
O
T
S
Peek-ABoo Target
D
O
T
S
Not
Used
Ramp Ball
Lock 2
Playfield Lamp Wiring Diagram
6
7
8
1
3
5
7
8
Switch
Return IC
Source N º :
LM339AN
D
O
T
S
For Lamp(s):
56-57 & 73-79
D iode
On
T erminal -orS trip
D
O
D
B
D iode
On
D iode
B oard
X
February
Lamp 9
Lamp 10
May
April
Lamp 17
Lamp 25
November
October
Lamp 33
Lamp 34
Lamp 41
Sec. 5: Playfield ...
Right
Top Lane
Middle
Top Lane
Lamp 49
Lamp 50
Lamp 57
D
O
T
S
Lamp 65
Double
Jackpot
1
Lamp 51
Lamp 44
Lamp 52
Not
Used
Lamp 67
Peek-A-Boo
1&2
Lamp 45
Lamp 53
Not
Used
Lamp 68
Peek-A-Boo
3
Peek-A-Boo
4
Lamp 74
Lamp 75
Lamp 76
Lamp 77
D
O
T
S
D
O
T
S
D
O
T
S
D
O
T
S
D
O
T
S
Strip Poker
(Lt Ramp)
Collect
Playmates
Section 5, Chapter 2
Page 100
Ctrfold Spotlite (Lt #1)
Ctrfold Spotlite (Rt #3)
D
O
T
S
Lamp 78
Left
Bumper
Lamp 55
3
4
5
6
7
8
9
9
8
7
6
5
3
2
1
PIN
CN7
Lamp 64
Not
Used
Lamp 71
D
O
T
S
Lamp 79
D
O
T Right & Bottom
S
Bumpers
D
O
T
S
D
O
T
S
Lamp 72
Start
Button
Lamp 80
Tournament
Button
YEL-BRN
YEL-RED
YEL-ORG
YEL-BLK
YEL-GRN
YEL-BLU
YEL-VIO
YEL-GRY
10
U17
U16
U15
U14
U13
U12
U11
U10
9
8
7
6
5
4
3
1
Wire & IC
LAMP
DRIVE
J13
I/O Power Driver Board
Lamp
Drive IC
Source N º :
VN02N
Lamp
Return
Transistor
Source N º :
STP19N06L
ROW
RETURN
2
3
Lamp 56
BLUE
COLUMN
DRIVE
1
Lamp 48
Magazine
1&2
Lamp 63
Ctrfold Spotlite (Rt #2)
Lamp 40
Photo Shoot
(Rt Ramp)
Not
Used
Lamp 70
Ctrfold Spotlite (Rt #1)
Lamp 47
Special
Lamp 62
Lamp 32
Left
Top Lane
Mystery
Lamp 54
Not
Used
Lamp 69
Lamp 73
Ctrfold SpotLite (Lt #2)
Lamp 46
Jackpot
Hurry-Up
Lamp 61
Lamp 39
7
8
Lamp 24
Pajama Party
Multiball
Not
Used
Pajama Party
Hurry-Up
Photo Shoot
(VUK)
Lamp 60
Lamp 38
Lamp 16
Jackpot
(Lt Ramp)
Lamp 31
5
6
Peek-A-Boo
Lamp 23
Multiball
Bunny
#10
Grotto
Arrow
Bunny
(Rt Orbit)
Lamp 59
Lamp 37
Lamp 15
Splash
(Lt Ramp)
Lamp 30
Lamp 8
Shoot
Again
Right
Outlane
Lamp 22
Drop
Target
Bunny
#5
Extra
Ball
Jackpot
Lamp 66
Not
Used
Not
Used
Lamp 43
Photo Shoot
(Rt Orbit)
Lamp 58
Lamp 36
Lamp 14
Photo Shoot
(Lt Ramp)
Lamp 29
Lamp 7
Mansion
4 (Rt)
Right
Return Lane
Lamp 21
Tease
Bunny
#4
Photo Shoot
(Center)
Splash
(Rt Ramp)
Not
Used
Lamp 35
Lamp 13
Bunny
(Lt Orbit)
Lamp 28
Lamp 6
Mansion
3
Left
Return Lane
Lamp 20
Surprise
Package
Bunny
#3
Lamp 42
Lamp 12
Photo Shoot
(Lt Orbit)
Lamp 27
Lamp 5
Mansion
2
Left
Outlane
Lamp 19
December
Bunny
#2
Bunny
#1 (Bottom)
Lamp 11
September
Lamp 26
Lamp 4
Mansion
1 (Lt)
June
Lamp 18
August
July
Magazine
3&4
X
March
SWITCH
RETURN
J13-Pin 10 is Power Out for +18v DC to
the Display Power Supply Bd at CN1-Pin 6
4
X
January
1
Wire & IC
3
Lamp 3
PIN
Q1
Q2
Q3
Q4
Q5
Q6
Q7
Q8
WHT-BRN U400
WHT-RED U400
WHT-ORG U400
WHT-YEL U400
WHT-GRN U401
WHT-BLU U401
WHT-VIO U401
WHT-GRY U401
ROW
RETURN
2
Lamp 2
GRN-BRN
GRN-RED
GRN-ORG
GRN-YEL
GRN-BLK
GRN-BLU
GRN-VIO
GRN-GRY
Please Note: Switch & Lamp Descriptions may differ slightly than that of the Dot Display due to space restraints.
Note: All Switch, Lamp & Coil assemblies require diodes. Some diodes are located
under the playfield on Terminal Strips or Diode Boards and not on the assemblies.
Lamp 1
CN5
Wire & Transistor
CPU/Sound Board
N/C
10
Not
Used
Plumb
Bob Tilt
SWITCH
DRIVE
4
5
6
7
8
9
10
PIN
LAMP
RETURN
J12
Wire & Transistor
PIN
RED-BRN
RED-BLK
RED-ORG
RED-YEL
RED-GRN
RED-BLU
RED-VIO
RED-GRY
RED-WHT
RED
From I/O Pwr.
Driver Board
J16-Pins 9-15
Q33
Q34
Q35
Q36
Q37
Q38
Q39
Q40
Q41
Q42
N/C
1
2
3
4
5
6
8
9
10
11
12
Playfield
Wiring
Playfield Terminal Strips, Fuses & Misc. Wiring Descriptions & Locations
Please Note: Terminal Strip(s), Diode Board(s) and/or Fuse Holder(s) locations shown,
represent the general location (your game may differ slightly).
Bottom of Playfield
Shown as if leaning up against the
Backbox.
All fuses are rated:
3A 250v Slo-Blo
Do Not Over-Fuse
11
,1
14
2,1
,15
3
14
8
16
,15
10
11
PLAYBOY
Lamps:
77 Ctrfold Spot...
74 Strip Poker....
Terminal
Strip 73 Ctrfold Spot-l
—ORG-GRN
toYEL-GRN
—RED
—ORG-RED
toYEL-RED
—RED
—ORG-BRN
toYEL-BRN
2
D
PLAYBOY
Lamps:
75 Collect
Playmates.....
lite (Lt #1)......
—N.C.
76 Lamps 75
—ORG
toYEL-ORG
—RED
—ORG-BLK
toYEL-BLK
—N.C.
B
PLAYBOY
Lamps:
71 Ctrfold SpotLite (Rt #2)....
Terminal
Strip 70 Ctrfold SpotLite (Rt #1)....
B
PLAYBOY
Lamps:
71 Ctrfold SpotLite (Rt #2)....
Terminal
Strip 70 Ctrfold SpotLite (Rt #1)....
B
—N.C.
A
Sw. 26
—WHT-RED
Sw. 35
—ORG-RED
—WHT-ORG
—N.C.
58
20
31
F
H
I
52
50
51
30
FLASHLAMP
48
79
La
mps
79
PLAYBOY
Lamps:
79 Right &
Bottom
Terminal
Bumpers.......
Strip
G
t
Bu ttom&
mpe
rs...
—Y
....
& EL—B BLKVIO
LK
X2
—R
ED
—B
LK
44
26
—N
.C.
E
Lamp 78
—YEL-BLU
& BLK
—RED
—BLK
43
44
22 23
40 41
I
—ORG-BLK
toYEL-BLK
—N.C.
—ORG-GRN
toYEL-GRN
—RED
—ORG-RED
toYEL-RED
—RED
—ORG-BRN
toYEL-BRN
—BLK
45
PLAYBOY
Lamps:
56 Magazine
1 & 2.............
3 & 4.............
—RED-VIO
—ORG-VIO
toYEL-GRY
—N.C.
—RED-GRY
—ORG-GRY
toYEL-BRN
G
PLAYBOY
Lamp:
78 Left
Bumper.........
—YEL-BLU
& BLK
10
—RED
—WHT &
GRY-RED
—GRN
—N.C.
PLAYBOY
Lamps:
56 Magazine
1 & 2.............
Terminal
Strip 57 Magazine
3 & 4.............
G
—RED
—BLK
—RED-VIO
—ORG-VIO
toYEL-GRY
—N.C.
—RED-GRY
—ORG-GRY
toYEL-BRN
PLAYBOY
Coils:
21 Drop Screen
Stepper #3....
Terminal
Strip 23 Drop Screen
Stepper #4....
I
—N.C.
—BLK
—WHT &
GRY-RED
—BLU
—N.C.
See the Pink Pages, Playfield - General
Parts (Below) (Pg. 60) for Terminal Strips,
Diodes, Fuses and Fuse Holders Part N1s.
—N.C.
Stepper #4....
—N.C.
—BLK
—WHT &
GRY-RED
—BLU
Q20 Coils Q19
—GRN
—N.C.
I
Stepper #2....
—N.C.
—RED
—WHT &
GRY-RED
Terminal
Strip 23 Drop Screen
PLAYBOY
Coils:
19 Drop Screen
Stepper #1....
Q23 Coils Q21
H
Terminal
Strip 20 Drop Screen
PLAYBOY
Coils:
21 Drop Screen
Stepper #3....
H
34
42
Terminal
Strip
—N.C.
G
Terminal
Strip 57 Magazine
Lamp 57
27
24
—RED
PLAYBOY
Coils:
19 Drop Screen
Stepper #1....
Terminal
Strip 20 Drop Screen
Stepper #2....
F50
PLAYBOY
Lamp:
78 Left
Bumper.........
F
—YEL-VIO
& BLK X2
—BLK
H
Lamp 56
F
—ORG
toYEL-ORG
—RED
—N.C.
43
51
Terminal
Strip
—ORG-BLU
toYEL-BLU
—N.C.
E
46
PL
La AY
Te
79 mps BOY
rm
Str inal
Ri :
ip
Bo gh
49
9
A
47
30
29
—ORG-WHT
—ORG-VIO
toYEL-VIO
—RED-WHT
—N.C.
PLAYBOY
Lamps:
77 Ctrfold Spot...
74
Strip Poker....
Terminal
Strip 73 Ctrfold Spotlite (Lt #2)......
D
SPI
C
E
E
A
Up-Kicker).....
D B
25
PLAYBOY
Switches:
26 Drop
Target............
Terminal
Strip 35 VUK (Vertical
79 Lamps 79
33
—ORG-BLU
toYEL-BLU
—N.C.
59
C
21
—ORG-VIO
toYEL-VIO
—RED-WHT
SPI
32
70 Lamps 71
32
23
24
28 22
PLAYBOY
Lamps:
75 Collect
Playmates.....
Terminal
Strip 76 Ctrfold Spotlite (Lt #1)......
C
—N.C.
35
Q20 Coils Q19
16
3
C
Terminal
Strip 76 Ctrfold Spot-l
—WHT-ORG
52SWITCH
Playfield
Wiring
Section 5, Chapter 2
Page 101
Sec. 5: Playfield ...
1
—ORG-WHT
Lamp 56
73 Lamps 74 Lamp 77
lite (Lt #2)......
62
33 14
34
35
36
55
37
54
53
38
60
15
Lamp 57
D
61
Lamp 78
9
—WHT-RED
73 Lamps 74 Lamp 77
19
Sw. 35
18
17
58 59
12
13
—ORG-RED
—N.C.
62
70 Lamps 71
59
57
A
Sw. 26
4 5 6 7
26
25
27
PLAYBOY
Switches:
26 Drop
Target............
Terminal
Strip 35 VUK (Vertical
Up-Kicker).....
Q23 Coils Q21
LEFT
FLIPPER FUSE
RED
GRY
-YEL 3A S.B. -YEL
76 Lamps 75
RIGHT
FLIPPER FUSE
BLU
RED
-YEL 3A S.B. -YEL
Explanation:
All Switch, Lamp & Coil assemblies require
diodes. Some diodes are located under the
playfield on Terminal Strips or Diode Boards
and not on the assemblies. The Switch and
Lamp Matrix Grids also note which Switch or
Lamp has a diode on a Terminal Strip (noted
by "DOTS" meaning: "Diode On Terminal
Strip") or on a Diode Board (noted by "DODB"
meaning: "Diode On Diode Board").
2-Flipper Circuit Wiring Diagram
The White Star Board System™ has allowed us to simplify the Flipper Circuit to the point where we have eliminated
the Flipper Board all together. The Flipper Circuit is now configured the same as any other Solenoid Drive Circuit.
GRY-GRN
GRY-YEL
GRY-ORG
GRY-RED
GRY-BRN
Technical Overview
OOOOOOOOOOOO
12 3 4
CN6
6 7
12
DEDICATED
SWITCH IN
CPU-SOUND BOARD
(PARTIAL VIEW)
UPPER
FLIPPER
N.O.
LEFT
FLIPPER
RIGHT
FLIPPER
CABINET
DEDICATED
SWITCH
CABINET
DEDICATED
SWITCH
N.O.
DS-5
CABINET
DEDICATED
SWITCH
N.O.
DS-1
DS-3
NOT
USED
LEFT
E.O.S.
RIGHT
E.O.S.
N.C.
ON ASSY.
DEDICATED
SWITCH
ON ASSY.
DEDICATED
SWITCH
N.C.
DS-2
DS-4
NOTE:
N.C. = Normally Closed
N.O. = Normally Open
BLK
(GROUND)
OOOOOOOOOOOOOOO
1
11
15
POWER OUT
MOS FET
STP20N10L
J16
Q14
Q15
Q16
VOLTAGE
OUTPUTS
(PARTIAL VIEW)
10
J10
HIGH CURRENT
SOLENOIDS
J9
9 8 7
2 1
1
OOOOOOOOO
I/O POWER
DRIVER BOARD
OOOOOOOOOO
BLU-BLK
ORG-GRY
ORG-VIO
These coil Fuses are located
under the playfield NEAR assembly,
see previous page for locations.
ORG
Sec. 5: Playfield ...
3A SLO-BLO
(Located under Playfield)
RED-YEL 50V DC
BLU-YEL
23-1100
ORG
3A SLO-BLO
(Located under Playfield)
RED-YEL 50V DC
GRY-YEL
23-1100
RIGHT
FLIPPER
COIL
LEFT
FLIPPER
COIL
COLOR
3A SLO-BLO
(Located under Playfield)
RED-YEL 50V DC
Section 5, Chapter 2
Page 102
GRY-YEL
XX-YYYY
UPPER
FLIPPER
COIL NOT USED
Our Flipper System
uses one supply voltage
(50v DC) for both kick &
hold. Once the Game
CPU detects a Flipper
Cabinet Switch closure
(during game play) it
applies a 40msec pulse
to the gate of the Flipper
Drive Transistor (STP20N10L). If it continues
to detect a Flipper Cabinet Switch closure (the
player holding the button
in) it will continue to pulse
the flipper drive transistor
1msec every 12msecs
for the duration of the
hold cycle.
The E.O.S. (End-OfStroke) Switch serves
the same function as
before as it prevents
foldback when the player has the flipper energized to capture balls.
The E.O.S. Switch is a
normally closed switch
which opens approximately 1/16" when the
flipper is energized. The
Game CPU will detect a
switch closure if the flipper bat is forced back by
a high velocity shot or
rebound on the playfield
and will apply another
40msec pulse of 50v DC
to the coil.
Note: If an Upper Flipper is used, the Flipper
Button (on the same side
of the cabinet as the
Upper Flipper) will have a
“Double-Stacked”
E.O.S. Switch.
This
allows the player to push
the Flipper Button either
half-way down to energize only the Lower
Flipper or pushing the
Flipper Button all the way
down to energize both
the Lower & Upper
Flippers.
Playfield
Wiring
Section 5
Chapter 3 of 4
Cabinet Wiring
120V / 240V
50 Hz / 60 Hz
1
GRY-WHT
2
2
FOR LOGIC
+12/-12v DC
TO BRIDGE 3
5
5
WHT
6
TO
DOLLAR BILL$
VALIDATOR
RF1
GRY-GRN
9
2
3
1 115v AC
5
BLU-WHT
4
BLU-WHT
8
WHT-RED
19v AC
4
9
8
FOR 18v DC
CONTROL LAMPS
TO BRIDGE 20
13v AC
10
9
16v AC
7
WHT
3
13v AC
6
FOR 20v DC
COILS
TO BRIDGE 2
7
WHT-RED
DOMESTIC
CONFIGURATION
GRN
RED
RED
BLK-YEL
275V
1F1
Domestic =
8A 250V
Note: Not All International Games
have or require a Service Outlet.
Slo-Blo Fuse
15
BLK-ORG
WHT-GRN
JUMPERS FOR VOLTAGE VARIATION
WHT
2
3
4
5
6
7
8
9
2
88v AC
2
WHT
1
1
BLK-RED
1
48v AC
12
100v AC
2
1F/M3
J14
1
1
3
3
YEL
2
115 VOLTS
DISPLAY
POWER
SUPPLY
BOARD
3
8
<<<
CONFIGURATON FOR
DOMESTIC 115V
<<<
2
FOR
GENERAL
ILLUMINATION
(G.I.'s)
EXPORT/ HIGH
LINE VOLTAGE
230/218/206 VOLTS
1F1= 5A 250V SLO BLO
1V1= 275V VARISTOR
BLK
WHT
<<<
<<<
5.7v AC
CONFIGURATION OF 220V
OR LOWER LINE VOLTAGES
FOR INTERNATIONAL USE
1
2
3
4
5
6
7
8
9
YEL-WHT
1
2
3
BLK
1
2
3
WHT
4
5
6
WHT
4
5
6
7
8
9
7
8
9
206 VOLTS
4
4
5
5
6
6
1F/M4
BLU
230 VOLTS
BLK
2
3
BLU
218 VOLTS
BLK
BALLAST
WHT
4
5
6
7
8
9
100/105 VOLTS
Cabinet
Wiring
STARTER
FLUOR. FS2 LIGHT
SPI N1: 165-5011-01
SPI N1: 010-5015-00
<<<
CONFIGURATON FOR
JAPAN or
LOW LINE VOLTAGE
<<<
LOCATED IN THE BACKBOX
120V AC
1F1= 8A SLO BLO
1V1= 130V VARISTOR
1
ONLY ON
COIN DOOR
WHT
SP2/K 5/8" Core
120V 50/60Hz 13W (UL)
BLK
FOR
50v DC
COILS
TO
BRIDGE 1
CN1
5A 250V
Slo-Blo Fuse
BLK
1
24v AC
HOT (L)oad
Int'l. = BRN 220V AC
Domestic = BLK 115V AC
International =
3
24v AC
YEL-BLK
SERVICE OUTLET
(Domestic / International)
130V
International =
4
48v AC
11
GRN (to (E)arth Ground)
Domestic =
FOR +5v DC
LOGIC
TO BRIDGE 21
J11
LINE
CORD
1V1
VARISTER
1
8v AC
14
(N)eutral
7
8v AC
13
GROUND
Domestic = WHT 115V AC
Int'l. = BLU 220V AC
16v AC
6
BLK
BLK-WHT
FLUORESCENT TUBE
RED
(F20T12CW)
SPI N1: 165-5031-02
WHT
Section 5, Chapter 3
Page 103
Sec. 5: Cabinet ...
1/0
J17
19v AC
3
TO I/O POWER DRIVER BOARD
LINE
FILTER
GRY
TO I/O POWER DRIVER BOARD
BLK
BLK
1F/M2
1T1
1F/M1
ON/OFF
FLUORESCENT TUBE, STARTER & BALLAST IN THE BACKBOX
Transformer Power Wiring Diagram
Cabinet / Coin Door Wiring Diagram
CPU BD
CN7
SW RETURN 6 3
2
WHT-VIO
START
BUTTON
WHT-BLU
3
LAUNCH
TOURNIE
BUTTON
BUTTON
WHT-GRN
SW RETURN 3 7
SW RETURN 2 8
5
WHT-YEL
6
WHT-ORG
WHT-RED
SW DRIVE 1
1
BLK
BLK
WHT-YEL
Right Coin Slot
BLK-RED
6th Coin Slot
Future Use
4th Coin Slot
European Use
from CN5-P1 (Sw. Drive 1)
TO COIN METER
J16-7 +5VDC
I/O DRVR BD
J7-10 Q24
I/O DRVR BD
from
CPU
CN6
Pin:
TM
PORTALS
SERVICE
BUTTONS
GRY-BLK
10
BEGIN TEST /
ENTER: BLACK
BUTTON
SERVICE CREDITS / RT.: GREEN
BUTTON
VOLUME /
LEFT: RED
BUTTON
GRY-VIO
9
GRY-BLU
8
GRY-GRN
7
DEDICATED
SWITCHES
G.I.
6.3V AC
WHT-GRN
YEL-WHT
GRN
YEL
8
G.I.
LAMPS
on
COIN
DOOR
I/O DRVR BD
J15
FOR USA 2 SLOT
COIN DOOR ONLY
COIL POWER
INTERLOCK SWITCH
Normally Open - 1
RED-WHT 16 VAC
20v DC
COILS
Common - 1
WHT-RED 16 VAC
Normally Open - 2
BLK-YEL 48 VAC
50v DC
COILS
Common - 2
BLK-YEL 48 VAC
FOR USE ONLY IN
SENTINEL COIN DOOR
I/O DRVR BD
J17
7
AMP CONNECTOR
TO $ BILL VALIDATOR
XFRMR
I/O DRVR BD
J11
SENTINEL
INTERFACE
BOARD
520-5037-01
4
(AC) WHT
112-5001-00
1N4001 DIODE
6
DIODE
7
GRN-BRN
WHT-GRN
J12
RED
RED-WHT
10
9
J13
YEL-GRY
1
-----------------------------------------------------------UK ONLY: 2 Extra Cabinet Buttons for the
Post Save™Feature are used. The Left Button operates the Left Outlane Ball Deflector.
The Right Button operates the Right Outlane
Ball Deflector. Both buttons pushed together,
operate the Center Up/Down Post. Both buttons are located under the Flipper Buttons.
------------------------------------------------------------
UK ONLY
CPU/SND
CN5
GRN-BRN
N.O.
8
N.O.
1
CPU/SND
CN7
WHT-GRY
WHT-BRN
9
1
9
PRINTER INTERFACE OPTIONAL
Cable Wiring Harness SPI Part N1:
036-5408-00
RS-232 Printer Interface Board SPI Part N1:
520-5069-00
FOR C120
INTERFACE BOARD
C120
CN1
CN2
+12 VDC 1
IN 1 2
KEY 3
IN 2 4
IN 3 5
N/U 6
IN 4 7
N/U 8
+12VDC 9
GND 10
SW 1 11
SW 2 12
SW 3 13
N/U 14
SW 4 15
RED
WHT-BLU
KEY
WHT-GRN
WHT-YEL
N/U
WHT-RED
N/U
RED
WHT
GRY-YEL
GRY-GRN
GRY-BLU
N/U
GRY-VIO
5
4
3
2
1
WHT-RED
WHT-VIO
WHT-ORG
KEY
N.C.
8
2
7
CPU
CN7
4
3
2
1
WHT-YEL
WHT-GRN
WHT-BLU
GRN-BRN
KEY
BLK (GND)
BRN
PRINTER BOARD
CN1
I/O DRVR BD J16-3:
+12V DC
DATA LINES
ORG-BRN
ORG-RED
ORG-BLK
KEY
ORG-YEL
ORG-GRN
ORG-BLU
ORG-VIO
ORG-GRY
I/O DRVR BD J3-10:
PRNTR CNT
C120
CN2
7
6
5
Connection Notes:
I/O DRVR BD
6
5
3
CPU
CN7
1
CPU
CN5
1
I/O
J7
I/O DRVR BD J3-9:
PRNTR CLK
I/O DRVR BD J2-10:
PRNTR ENABLE
I/O DRVR BD J3-1:
PRNTR BUSY
I/O DRVR BD J16-7:
+5V DC
COIN DOOR
Section 5, Chapter 3
Page 104
3
XFRMR
N/U
N/U
N/U
KEY
WHT-RED
CN1
WHT-BLU
7 SW RET 6
WHT-GRN
6 SW RET 5
WHT-YEL
5 SW RET 4
GRN-BRN
4 SW DRV 1
1
CN5
BLK
CN7 10
2
GND
BRN
1 20VDC
J7-1
KEY
I/O
3
BD
BLK
8
1
2
3
4
SW RET 2 5
Sec. 5: Cabinet ...
CN3
(AC)
SW DRV 1
SW RET 5
3
CPU CN7
TO SENTINEL COIN MECH.:
WIRING CONFIGURATION WILL
VARY ACCORDING TO COUNTRY
115v AC
LINE
VOLTAGE
2
I/O DRVR BD
Lamp 80
Tournie
Lamp 72
Start
3
1
START / TOURNIE BUTTON LAMPS
GRY-BRN
2
2
3
J16-7 +5VDC
I/O DRVR BD 22 RED
J16-3 +12VDC
I/O DRVR BD 82 GRY-RED
GRY-ORG
4
1
78 VIO-GRY
GRN-BRN
BLK
GRY-BLU
8
22 RED
GRN
Memory Protect
Switch
GRY-VIO
9
3
5
6
CABINET BOT.
SPEAKER (SP3)
YEL-WHT
FOR THE PRINTER
SUB-ASSEMBLY
GROUND
00 BLK
GRY-BLK
10
CPU
CN7
YEL-BLK
7
BLK
BLK
12
LEFT FLIPPER
BUTTON
WHT-GRN
U.S. Bill Acceptor
Center Coin Slot
BLK
CPU BD.
CN6
RIGHT FLIPPER
BUTTON
Left Coin Slot
N/C
1
CPU BD.
CN7
10
CPU/SND
CN4
WHT-BLU
8
GRN-BRN
BACKBOX RT.
SPEAKER (SP2)
REDBLK
from
CPU
CN5
Pin:
GRN-VIO
RED-BLK
WHT-VIO
WHT-RED
8
BACKBOX LEFT
SPEAKER (SP2)
5th Coin Slot
Future Use
WHT-ORG
7
CPU BD CN5
SW DRIVE 7 8
REDBLK
6
SW RETURN 5 5
SW RETURN 4 6
3
BLKRED
RIGHT
BUTTON
SW RETURN 7 2
from
CPU
CN7
Pin:
WHT-GRY
4
REDWHT
LEFT
BUTTON
SW RETURN 8 1
COIN DOOR
CONNECTOR
PLUMB
BOB TILT
MONO SPEAKERS X3
CPU/SND
CN4
CPU BD CN7-10:
GND
J2
P1-P9
1
2
3
4
5
6
7
8
9
CN2
GRY-RED
KEY
GRN-WHT
BRN-WHT
ORG-WHT
N/C
BRN
N/C
RED
BLK
1
2
3
4
5
6
7
8
9
10
Cabinet
Wiring
Section 5
Chapter 4 of 4
Printed Circuit Boards (PCBs)
Tr o u g h U p - K i c k e r D u a l O P T O B o a r d s T h e o r y o f O p e r a t i o n & S c h e m a t i c
As light from the Transmitter LED1 falls on the Receiver LED1, it generates a Positive Bias Voltage (0.7v to 1.5v)
which is applied to the Gate (G) of Q1 (Fet 2N5460) turning Q1 off. When Q1 is held off, no current flows through
Q2's (2N3906) Base (B). With no base current, Q2 is off and acts as an OPEN SWITCH. When the light is
interrupted (BLOCKED) R1 (Rec. Bd.) bleeds the gate voltage off of Q1 allowing it to conduct, switching Q2 on,
which acts as a CLOSED SWITCH. The LED2 (Trans/Rec) Circuit operates identical as the LED1 Circuit.
+5v
B
CN1
RED
Te s t
Point
CN1
1 WHT/XXX
2
R1
LED 1
R1
10M W
TLRH180P
180 W
R2
4.7K W
G
Q1
2N5460
R3
10K W
LED 1
TLRH180P
A
B
B
D
S
(Switch Row/
Return +)
E
Q2
2N3906
C
Te s t
Point
Te s t
Point
G=Gate D=Drain S=Source
B=Base E=Emitter C=Collector
3 WHT/XXX
R2
180 W
R4
LED 2
10M W
TLRH180P
LED 2
BLK
Q3
2N5460
R6
10K W
1
520-5173-00
Transmitter
GND
4.7K W
G
TLRH180P
520-5174-00
Receiver
A
(Switch Row/
Return +)
R5
B
D
S
E
Q4
2N3906
C
2 GRN/XXX
Te s t
Point
(Switch Col/
Drive -)
= Emitting Light
Tr o u g h U p - K i c k e r D u a l O P T O B o a r d s C o m p o n e n t La y o u t & Pa r t s
Boards Actual Size
520-5173-00 (TRANS)
520-5174-00 (REC)
(Screened Text Printed Larger for Clarity)
00-4715-025
CER
105
Back Side
(Solder / Surface Mounts)
Front Side
(LEDs & 3-Pin Connector)
1B1
ITEM
QTY
PART NUMBER
REF-DESIGNATOR
DESCRIPTION
A
—
01
02
03
04
05
B
—
01
02
03
04
05
06
07
08
09
1
1
1
2
2
3
3
1
1
1
2
2
2
2
2
2
3
3
515-0173-00
520-5173-00
045-5111-02
165-5052-00
121-5067-00
530-5308-02
545-5518-00
515-0174-00
520-5174-00
045-5111-03
165-5052-00
110-5006-00
110-0086-00
121-5082-00
121-5083-00
121-5011-00
530-5308-02
545-5518-00
Dual-OPTO Trans. Bd. Assy.
Dual-OPTO Trans. Board
CN1
LED1, LED2
R1, R2
n/a
n/a
Dual-OPTO Rec. Bd. Assy.
Dual-OPTO Rec. Board
CN1
LED 1, LED 2
Q1, Q3
Q2, Q4
R1, R4
R2, R5
R3, R6
n/a
n/a
PCB Assy. (with all Items 1-5)
PCB Assy. (with Items 1-3 only)
2X, .156" Rt. Angle (26-60-5020) Conn.
LED TLRH180P (Ultra Bright Red)
180 W 1/8W Chip Res. (CRCW)
OPTO PCB Brass Tube Spacer
OPTO PCB Rubber Grommet
PCB Assy. (with all Items 1-9)
PCB Assy. (with Items 1-7 only)
3X, .156" Rt. Angle (26-60-5030) Conn.
LED TLRH180P (Ultra Bright Red)
2N5460, Transistor (P-FET SOT-23)
2N3906, Transistor
10M W 1/8W Chip Res. (CRCW)
4.7K W 1/8W Chip Res. (CRCW)
10K W 1/8W Chip Res. (CRCW)
OPTO PCB Brass Tube Spacer
OPTO PCB Rubber Grommet
Printed Circuit
Boards (PCBs)
Replacement Part:
LED TLRH180P
(T1-3/4 GaAIAs)
SPI Part N1:
165-5052-00
Section 5, Chapter 4
Page 105
Sec. 5: PCBs
2A 7
105
103
MGE3
MGE3
2A 7
Back Side
(Solder / Surface Mounts)
562
Q4
562
1B1
Front Side
(LEDs & 2-Pin Connector)
103
00-3715-025
SNART
23727URXEOHVKRRWLQJ
9ROW0H WH U7HVWLQGLF DWH VQRUPDORSHUDWLQJF RQGLWLRQ
A. OPEN OPTO (Light Falling on LED) = SWITCH OPEN. Place meter leads across points A and B on the
LED1 Circuit (Refer to Schematic Drawing on previos page, 520-5174-00 Receiver Side). It should read
approximately 0.8 - 1.2v DC. The LED2 Circuit operates the same.
B. CLOSED OPTO (Light Blocked) = SWITCH CLOSED. Place meter leads across points A and B on the
LED1 Circuit (Refer to Schematic Drawing on previous page, 520-5174-00 Receiver Side). It should read
approximately 0.0 - 0.1v DC. The LED2 Circuit operates the same.
2VF LOORVF RSH7H VWLQGLFDWHVQRUPDORSH UDWLQJFRQGLWLRQ
)LJ$
A. OPEN OPTO (Light Falling on LED) = SWITCH OPEN. Place Scope lead
at Pin-1 of OPTO Rec. Board with Scope Grounded (see Schematic). The
Scope should display a STEADY +5v as shown in Fig. A, Wave Form
Diagram.
)LJ%
B. CLOSED OPTO (Light Blocked) = SWITCH CLOSED. Place Scope lead
at Pin-1 of OPTO Rec. Board with Scope Grounded (see Schematic). The
Scope should display a PULSE STREAM indicating Q2 has switched "On"
as shown in Fig. B, Wave Form Diagram. This is your Switch Drive Pulse.
%HQFK 7HVW6HH)LJ&
Please Note: To perform this test you must use a spare
560: Pull-Up Resistor, SPI Nº: 121-5047-00
)LJ&
Disconnect the OPTO Transmitter / Receiver Board from
the circuit. Connect one side of a 560: Pull-Up Resistor
to Pin-1 of the OPTO Receiver Bd. and the other side of
the resistor to a 5v DC source. Connect Pin-2 to GND.
Connect a +5v DC source to Pin-1 of the Transmitter &
GND to Pin-2. Align with the Receiver OPTO approx. 3"
distance. Using your Volt-Meter or an Oscilloscope,
monitor Pin-1 while BLOCKING and UNBLOCKING the
BEAM from the Trans. The output will be approx. +5v DC
when the BEAM IS NOT BLOCKED and approx. v
when the BEAM IS BLOCKED.
7URXJK'XDO2372%RDUGV$OLJQPHQW7HVWIRU/('
When a working OPTO is installed and connected in a game, the transmitter should light (LED1 lower & LED2
upper) when the power is switched on. With the playfield in Service Position #1 (playfield lifted up in the half-way
position resting on the Prop Rod or edge slide support brackets) and the game on, the LED lights should show up
as a BRIGHT RED RINGS through the back of the Receiver Board around the Receivers LED1 & LED2 (See
Fig. 1). Testing only LED1: With the game in Switch Test Mode, lifting the Trough Plunger with a fingertip should
block the BEAM and cause the Switch Position to trigger (See Fig. 2). View Fig. 2a & 2b (on the next page) for a
sectional view of the Light Path (note alignment) and what happens as a ball breaks the light beam.
)LJ
5HFHLYHU %RDUG
6HF3&%V
%5,*+7 5(' 5,1*
3OXQJHU
9LHZIDFLQJWURX JKZLWKSOD\
ILHOGLQ6HU YLFH 3RVLWLRQ
6HFWLRQ&KDSWHU
3DJH
)LJ
3OXQJHU EORFNV %($0
/LI W
SOXQJHU
WRF KH FN
VZLWFK DV
VKRZQ
3ULQWHG&LUFXLW
%RDUGV3&%V
6HFWLRQDOYLHZIURPULJKW)LJDE
5HF
6LGH
)LJD
)LJE
7UDQV
6LGH
/LJKW 3DWK
3LQEDOO
(Note
alignment)
7URXJK'XDO2372%RDUGV$OLJQPHQW7HVWIRU/('
When a working OPTO is installed and connected in a game, the transmitter should light (LED1 lower & LED2
upper) when the power is switched on. With the playfield in Service Position #1 (playfield lifted up in the half-way
position resting on the Prop Rod or edge slide support brackets) and the game on, the LED lights should show up
as a BRIGHT RED RINGS through the back of the Receiver Board around the Receivers LED1 & LED2 (See
Fig. 1, previous page). Testing only LED2: TO PERFORM THIS TEST, A PINBALL MUST BE IN THE BALL
TROUGH. With the game in Switch Test Mode, lifting the Trough Plunger with a finger tip should block the BEAM
on LED2 and cause the Switch Position to trigger (See Fig. 3). View Fig. 3a & 3b for a sectional view of the Light
Path (note alignment) and what happens as a "double-stacked" ball scenario breaks the light beam.
)LJ
)LJD
)LJE
5HF
6LGH
7UDQV
6LGH
3LQEDOO
/LJKW 3DWK
3OXQJHU
EORFNV
%($0
/LI W
SOXQJHU
WRF KH FN
VZLWFK DV
VKRZQ
,
(Note
alignment)
0
3
2
5
7
$
1
7
6HF3&%V
If replacement of LED is required, insure that is mounted correctly
before and after soldering (See Fig. 4a / 4b).
)LJD
&RUUHFW3RVLWLRQ
3ULQWHG&LUFXLW
%RDUGV3&%V
)LJE
,QFRUUHFW3RVLWLRQ
6HFWLRQ&KDSWHU
3DJH
Dot Matrix Display / Display Controller Bd. Combined Display Connections
CN1-Pin 2
P2-Pin 14
P2-Pin 2
NOT USED
GROUND
GROUND
GROUND
GROUND
GROUND
GROUND
NOT USED
SER. DATA
PIX CLOCK
COL. LATCH
ROW CLOCK
ROW DATA
DISPLAY ENABLE
NOT USED
GROUND
GROUND
GROUND
GROUND
GROUND
GROUND
NOT USED
SER. DATA
PIX CLOCK
COL. LATCH
ROW CLOCK
ROW DATA
DISPLAY ENABLE
Sec. 5: PCBs
VIO-YEL
BLU
RED
BLK
YEL
—
GRY-YEL
YEL-BLK
Section 5, Chapter 4
Page 108
8
7
6
5
4
3
2
1
CN3-Pin 25
RIBBON CABLE
J1
CN3-Pin 1
CN1-Pin 13
520-5055-03
CN1-Pin 14
STAT 3
BUSY
STAT 1
STAT 2
NOT USED
STAT Ø
STROBE
RESET
DATA 6
DATA 7
DATA 4
DATA 5
DATA 2
DATA 3
DATA Ø
DATA 1
SWITCH 7
SWITCH 8
SWITCH 5
SWITCH 6
SWITCH 3
SWITCH 4
SWITCH 1
SWITCH 2
NOT USED NOT USED
J3
520-5052-00
CN3-Pin 2
GND
KEY
+5 VDC
Display Controller Board
CN3-Pin 26
3
2
1
Dot Matrix Display Board
BLK
—
RED
RIBBON CABLE
J2
CN1-Pin 1
P2-Pin 13
RIBBON CABLE
P2
P2-Pin 1
+68v DC
+12v DC
+5v DC
GND
GND
KEY
-98v DC
-110v DC
P1
Printed Circuit
Boards (PCBs)
D i s p l a y Po w e r S u p p l y B o a r d S c h e m a t i c
1 CN2
-120V
8PKK156C
2 CN2
-100V
8PKK156C
3 KEY
4 CN2
C7
5 CN2
R1
130 W
5W
D1
1N4004
88V AC
+
CN1 1
GND
CN1 3
7PKK156E
KEY 5
+20V
0.75A
S.B.
CN1 4
7PKK156E
CN1 6
CN1 7
.. Q1
+5V
R2
7 CN2
+12V
8PKK156C
8 CN2
Q5
MPSA92
C3
D5
1N4760A
68V
GND
+
D2
1N4004
+5V
1N4764A
100V
47K W
1W
C2
.. Q2
220 uF
200V
+20V
D6
R3
GND
7PKK156E
+5V
6 CN2
0.1 uF
500V
R6
330K W
1/2W
R8
2K W
5W
+60V
8PKK156C
MJE15030
F1
7PKK156E
XFRMR
_GND
GND
8PKK156C
GND +5V
+12V
MJE15030
1.5K W
1/2W
47K W
1W
CN1 2
0.1 uF
500V
8PKK156C
C1
7PKK156E
110V AC
Q3
R4
D3
1N5228
3.9V
220 uF
200V
GND
GND
8PKK156C
MPSA42
D4
1N5228
3.9V
R5
1.5K W
1/2W
C4
0.1 uF
500V
R10
R7
330K W
1/2W
GND
1.5K W
1/2W
D7
1N4743
13V
.. Q4
MJE15031
7PKK156E
D i s p l a y Po w e r S u p p l y B o a r d C o m p o n e n t La y o u t & Pa r t s
Actual Board Size 5” X 3.3”
QTY
PART NUMBER
REF-DESIGNATOR
DESCRIPTION
—
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
1
2
3
0
1
1
2
2
1
1
1
1
2
1
1
2
2
2
2
1
1
2
3
2
1
0
520-5138-00
125-5044-00
125-5035-00
125-5003-00
045-5015-07
045-5015-08
112-5003-00
112-0053-00
112-0062-00
112-0049-00A
112-0061-00
200-5000-17
205-0004-00
110-0100-00
110-0082-00
110-0101-00
535-5000-11
240-5008-00
237-5501-00
110-0103-00
121-5061-00
121-5060-00
121-5038-00
121-5059-00
121-5062-00
124-5003-00
Display Power Supply Board
C1, C2
C3, C4, C7
(C5, C6: NS)
CN1
CN2
D1, D2
D3, D4
D5
D6
D7
F1
F1
Q1
Q2
Q3, Q5
Q3, Q4
Q3, Q4
Q3, Q4
Q4
R1
R2, R3
R4, R5, R10
R6, R7
R8
(VR1: NS)
Complete PCB Assembly
220uF, 200v, Radial Lytic Cap.
0.1uF, 500v, Ceramic Disk Cap.
22uF, 35v, Rad Lytic Cap
7PKK156E (PIN5=KEY)
8PKK156 (PIN3=KEY)
1N4004, Diode
1N5228, 3.9v, Diode
1N4760A, 68v, Diode
1N4764A, 100v, Diode
1N4743, 13v, Diode
3/4A (0.75A) S.B. Fuse
Fuse Clip
MPSA92, Transistor
MPSA42, Transistor
MJE15030, Transistor
Heatsinks - AAVID #563002
#6-32 KEPS Nut
#6-32 X 3/8" PPH Screw
MJE15031, Transistor
130 W 5W Res.
47K W 1W Res.
1.5K W 1/2W Res. (R9: NS)
330K W 1/2W Res.
2K W 5W Res.
7812CT
Printed Circuit
Boards (PCBs)
(NS = Not Stuffed)
Section 5, Chapter 4
Page 109
Sec. 5: PCBs
ITEM
Display Controller Board Schematic
3
4
J1
U2
U1-A
D
J5
U1-C
U1-D
J3-1
J3-2
J3-3
C
U4
B
U9
J2
U1-F
J4-1
Sec. 5: PCBs
A
U10
U1-E
J4-2
J4-3
J4-4
J4-5
J4-6
4
Section 5, Chapter 4
Page 110
3
Printed Circuit
Boards (PCBs)
Display Controller Board Schematic
2
1
U8
U3
D
U7
C
U6
U5
U1-B
A
U11
Schematic Set
Sheet 1 of 1
SIZE
REV.
E
D
SPI Display Controller Board
SPI Part Nº: 520-5055-03 JUNE 2001
Prepared By: CES Inc. Edited By: SPI Inc.
Model: 237-0255-00 Dated: 06/17/01
Non-Text Document
2
Printed Circuit
Boards (PCBs)
1
Section 5, Chapter 4
Page 111
Sec. 5: PCBs
B
D i s p l a y C o n t r o l l e r B o a r d C o m p o n e n t La y o u t & Pa r t s
SAMSUNG 046A
K6T0808C1D-GB55
03FC59K
HCT273
02C5RVK
LS245
09AD7YK
HCT245
EF68B09EP
WB2060034
(ST) PHILIPPINES
08A51XX
HCT04
XILINX®
XC9572XL™
TQ100AEN0101
F1168339A
7C
Actual Board Size 20.5cm X 12.5cm
11AJ
L52B
ROM1
Sec. 5: PCBs
ITEM
QTY
PART NUMBER
—
1
2
3
4A
4B
5
6
7
8
9
10
11
12
1
520-5055-03
2 (See Pg. DR. 3 Table)
2
077-5217-00
1
045-5015-03
1
100-0189-01
1
0451
0771
100If part is
1
100required,
1
100call Tech1
100nical Sup1
140port (see
7
125back of
20
125cover).
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
2
21
2
3
1
1
1
1
1
1
4
1
1
1
2
5
1
2
1
3
9
2
1
1
1
125125n/a
n/a
045-5015-02
045-5015-26
100-5045-00
165-5099-00
100121n/a
n/a
121If part is
121required,
121call Tech121nical Sup121port (see
back of
121cover).
121121125-5015-00
n/a
n/a
100-5044-00
Section 5, Chapter 4
Page 112
REF-DESIGNATOR
ROM0
DESCRIPTION
(NS = Not Stuffed)
Display Controller Bd. (FCC FEB98) Rev. E June 2001 Complete PCB Assembly
U5 (ROM0) (U6 (ROM1): NS)
4MB ROM 27C040 (M27C401-100)
U5 (U6: NS)
32-Pin, IC Dip Socket
J3
3-Pin, PKK156B Connector
U3
MC6809E
U3
40-Pin, Socket
J4
6-Pin (6P100)
U1
74HCT04D (74LS04)
U9
74HCT245D
U7
74HCT273D
U2
74LS245DW
RSN1
8MHZRSN (8Mhz) Crystal
C35-C39, C40, C41
0.01uF, 50v Cap.103-0805-X7R
C21, C24, C28-C32, C33, C34, C42, C43, C44, C45, C46 0.1, 50v Cap. 104-0805
C47, C48, C49, C50, C53 (C51: NS)
C26, C27
0.22uF, 50v Cap. 224-1206-Z5U
C1-C12, C13-C18, C20, C23, C52
470pF, 50v Cap. 471-0805
FB1, FB2
Ferrite Bead, FB0370
FID1-3
FIDTP50M
(J5: NS)
HDR2X1
J2
7-Pin, Dual Row .1" Hdr. Conn HDR2X7
J1
13-Pin, Dual row .1" Hdr. Conn HDR2X13
U8
K6T0808C1D-GB55, Int. Samsung 046A
L1
LED T1-3/4 DIFFUSER RED
U11
LM3940IMP-3.3
R16-R18 (R19: NS)
0W 1/10W Resistor 0805
RESET
DO NOT STUFF
(R4: NS)
RES0E1/4W5CF, 0
R20
100W 1/10W Resistor 0805
R9, R15
100KW 1/10W Resistor 0805
R1, R2, R3, R7 (R6: NS)
10KW 1/10W Resistor 0805
R5
180W 1/10W Resistor 0805
R11, R13
1KW 1/10W Resistor 0805
R8
1MW 1/10W Resistor 0805
R10, R12, R14
220W 1/10W Resistor 0805
R21, R22-R29
33W 1/10W Resistor 0805
C19, C25
100uF, 25v TCap.
(C22: NS)
22uF, 25v TCap.
(U10: NS)
TL7705ACD
U4
XC9572XL, Int. Xilinx®
Printed Circuit
Boards (PCBs)
,23RZH U'ULYHU%RDUG7KHRU \RI2SHUDWLRQ
5v Supply:
An AC voltage of approximately 9v comes into the board at [J17-(1-4)] this AC voltage is then full-wave rectified
by bridge BRDG 21 and filtered by Capacitor C203. The resulting voltage is 11v DC which is inserted into a linear
voltage regulator for the output of 5v DC. This 5v regulated voltage can be adjusted by potentiometer R116 the
voltage should be set to 5.00v. Besides powering the I/O Board the regulated 5 volts supplies power to the CPU /
Sound Board, Gas Plasma (Dot Matrix) Display and Plasma (Display) Controller Board. Power for these devices
comes off the I/O Board on [J16-(4-8)].
+5v, +20v, +50v, +18v, & +12v LED Indicators:
These DC voltages are derived on the I/O Board by
rectification and filtering. Each has a LED indicating that
power is being supplied to each of these voltage sources.
The -12v supply comes from the same transformer winding
as the +12v thus it does not have a LED indicator.
** Note that the +50v & +20v power sources are turned off
by the Interlock Switches when the Coin Door is OPEN.
/('
6833/< 92/7$*(
/
/
Y
/
Y
/
Y
/
Y
Reset Circuitry:
The I/O will reset in three (3) cases:
1.
The CPU is in reset. The CPU’s reset signal is fed into the I/O through connector J1 and forces
the I/O into reset.
2.
The 5v supply has fallen below 4.75v.
3.
The watchdog is not being fed by the scanning of the light matrix. More specifically Pin-19 of U6
must be toggling once every 50ms to prevent the watchdog from resetting. The scanning of the
light matrix is controlled by the CPU through J1.
LED L204 shows the reset state of the I/O Board. If this LED is not lit either the 5v DC is below 4.75v or the
CPU/Sound Board is holding the I/O in reset. If the LED is flashing this means that the watchdog is not being feed
by the CPU/Sound Board and the I/O is oscillating into and out of reset. If the LED is continuously on the board is
out of reset and communication from the CPU to the lamp matrix is confirmed. Testpoint Blanking is the actual
reset signal on the I/O Board. A low voltage indicates that it is in reset this will turn off all Solenoid (Coil) Drivers,
Flash Lamps, Lamp Matrix Drivers, Auxiliary Outputs and Flipper Outputs. A high voltage indicates that it is out of
reset and normal operation can take place.
Address Decoding:
All Address decoding is done by two 74LS138’s (U204 & U205) (3 of 8 decoder). Both of these must be in
operation for the I/O Board to function properly.
Solenoid (Coil) Drivers & Flash Lamps:
J8 & J9 are high side drivers for driving solenoids and other heavy loads. Each connector has its own buffer
driving 8 drivers. J8 & J9 consist of MOSFET Drivers 20N10L which can easily & safely be tested by clipping one
end of a clip-lead to test point FET TPL1 and then the other to the corresponding gate resistor R1-R16 (see Note
1). This will apply 3.4v to the gate of the MOSFET Transistor thus switching it on. J7 & J6 each are a bank of 8
low side driver for driving lamps or other lower current solenoids (coils). They use a Bipolar Power Transistor
TIP122 which can also be tested by using TEST POINT TIP TPL3 and the corresponding resistors R17-R32*
(see Note 1).
Note 1 x Clip on the resistor side with the white stripe. xx R1 controls Q1, R2 controls Q2, et cetera...
Lamp Matrix:
J12 has 10 low side drivers for the lamp strobes which consist of 19N06L MOSFETS. Only one lamp strobe
should be low at any time. Again the scanning of the lamp strobes keeps the I/O from resetting. J13 has 8 high
side drivers with each having a status indicator. All the status indicators are logically ’OR’ed together and fed back
to the CPU/Sound Board. The status can identify open loads (for example open lamp filaments or intermittent
connections) and short circuits. These drivers are also short-circuit protected.
General Illumination (G.I.) Lights:
J15 has 6v AC switched on & off by a relay on the I/O Board. The relay is controlled by Q200 which supplies
power to the 24v coil winding to activate the relay. There are 4 taps on J15 each fused at 5A for this 6v AC source.
3ULQWHG&LUFXLW
%RDUGV3&%V
6HFWLRQ&KDSWHU
3DJH
6HF3&%V
Auxiliary In & Out:
J2-8 CMOS Outputs sometimes used for a printer interface.
J3-8 CMOS Inputs general purpose inputs.
I / O Po w e r D r i v e r B o a r d S c h e m a t i c ( S h e e t 1 o f 5 )
4
3
D
C
B
Sec. 5: PCBs
A
NOTES:
R ALL RESISTOR VALUES ARE IN OHMS ( W ), 1/4W, 5%, UNLESS OTHERWISE SPECIFIED.
R ALL CAPACITOR VALUES ARE IN MICROFARADS ( mF ), UNLESS OTHERWISE SPECIFIED.
R 0.1 MICROFARADS ( mF ) BYPASS CAPACITOR ON ALL IC’S.
4
Section 5, Chapter 4
Page 114
3
Printed Circuit
Boards (PCBs)
I / O Po w e r D r i v e r B o a r d S c h e m a t i c ( S h e e t 1 o f 5 )
2
1
The above circuit(s) continue at the address shown (#-XY).
# = Sheet Number (1-5), X = Column Grid, Y = Row Grid
D
C
A
Schematic Set
Sheet 1 of 5
SIZE
REV.
E
D
SPI I/O Power Driver Board
SPI Part Nº: 520-5137-01
Prepared By: CES Inc. Edited By: SPI Inc.
Model: 237-0161-00 Dated: 09/05/97
2
Printed Circuit
Boards (PCBs)
1
Section 5, Chapter 4
Page 115
Sec. 5: PCBs
B
I / O Po w e r D r i v e r B o a r d S c h e m a t i c ( S h e e t 2 o f 5 )
4
3
D
C
B
Sec. 5: PCBs
A
The above circuit(s) continue at the address shown (#-XY).
# = Sheet Number (1-5), X = Column Grid, Y = Row Grid
4
Section 5, Chapter 4
Page 116
3
Printed Circuit
Boards (PCBs)
I / O Po w e r D r i v e r B o a r d S c h e m a t i c ( S h e e t 2 o f 5 )
2
1
NOTES:
R ALL RESISTOR VALUES ARE IN OHMS ( W ), 1/4W, 5%, UNLESS OTHERWISE SPECIFIED.
R ALL CAPACITOR VALUES ARE IN MICROFARADS ( mF ), UNLESS OTHERWISE SPECIFIED.
R 0.1 MICROFARADS ( mF ) BYPASS CAPACITOR ON ALL IC’S.
D
C
A
Schematic Set
Sheet 2 of 5
SIZE
REV.
E
D
SPI I/O Power Driver Board
SPI Part Nº: 520-5137-01
Prepared By: CES Inc. Edited By: SPI Inc.
Model: 237-0161-00 Dated: 09/05/97
2
Printed Circuit
Boards (PCBs)
1
Section 5, Chapter 4
Page 117
Sec. 5: PCBs
B
I / O Po w e r D r i v e r B o a r d S c h e m a t i c ( S h e e t 3 o f 5 )
4
3
D
C
The below circuit(s) continue at the address shown (#-XY).
# = Sheet Number (1-5), X = Column Grid, Y = Row Grid
B
Sec. 5: PCBs
A
4
Section 5, Chapter 4
Page 118
3
Printed Circuit
Boards (PCBs)
I / O Po w e r D r i v e r B o a r d S c h e m a t i c ( S h e e t 3 o f 5 )
2
NOTES:
R ALL RESISTOR VALUES ARE IN OHMS ( W ), 1/4W, 5%, UNLESS OTHERWISE SPECIFIED.
R ALL CAPACITOR VALUES ARE IN MICROFARADS ( mF ), UNLESS OTHERWISE SPECIFIED.
R 0.1 MICROFARADS ( mF ) BYPASS CAPACITOR ON ALL IC’S.
1
JAN 2001 Cut trace on solder side at Aux. Out Port J2-PIN1 thru J2-PIN3 &
TS
J2-PIN5 thru J2-PIN9; Soldered Resistor 100W 1/4W 5% (SPI N1:
121-5007-00). This Modification (highlighted below at J2 with a
dotted-line box) was accomplished on boards produced after Jan. 1, 2001.
This board is backwards compatible for the White Star™ Board System.
JET
Resistor 100W
D
C
A
Schematic Set
Sheet 3 of 5
SIZE
REV.
E
D
SPI I/O Power Driver Board
SPI Part Nº: 520-5137-01
Prepared By: CES Inc. Edited By: SPI Inc.
Model: 237-0161-00 Dated: 09/05/97
2
Printed Circuit
Boards (PCBs)
1
Section 5, Chapter 4
Page 119
Sec. 5: PCBs
B
I / O Po w e r D r i v e r B o a r d S c h e m a t i c ( S h e e t 4 o f 5 )
4
3
D
The below circuit(s) continue at the address shown (#-XY).
# = Sheet Number (1-5), X = Column Grid, Y = Row Grid
C
The above circuit(s) continue at the address shown (#-XY).
# = Sheet Number (1-5), X = Column Grid, Y = Row Grid
B
Sec. 5: PCBs
A
4
Section 5, Chapter 4
Page 120
3
Printed Circuit
Boards (PCBs)
I / O Po w e r D r i v e r B o a r d S c h e m a t i c ( S h e e t 4 o f 5 )
2
1
05-25-99
CUT PIN-3 TO GND ON U210 (4-3D)
NOTES:
R ALL RESISTOR VALUES ARE IN OHMS ( W ), 1/4W, 5%, UNLESS OTHERWISE SPECIFIED.
R ALL CAPACITOR VALUES ARE IN MICROFARADS ( mF ), UNLESS OTHERWISE SPECIFIED.
R 0.1 MICROFARADS ( mF ) BYPASS CAPACITOR ON ALL IC’S.
D
The above circuit(s) continue at the address shown (#-XY).
# = Sheet Number (1-5), X = Column Grid, Y = Row Grid
The below circuit(s) continue at the address shown (#-XY).
# = Sheet Number (1-5), X = Column Grid, Y = Row Grid
C
A
Schematic Set
Sheet 4 of 5
SIZE
REV.
E
D
SPI I/O Power Driver Board
SPI Part Nº: 520-5137-01
Prepared By: CES Inc. Edited By: SPI Inc.
Model: 237-0161-00 Dated: 09/05/97
2
Printed Circuit
Boards (PCBs)
1
Section 5, Chapter 4
Page 121
Sec. 5: PCBs
B
I / O Po w e r D r i v e r B o a r d S c h e m a t i c ( S h e e t 5 o f 5 )
4
3
D
C
The above circuit(s) continue at the address shown (#-XY).
# = Sheet Number (1-5), X = Column Grid, Y = Row Grid
B
Sec. 5: PCBs
A
4
Section 5, Chapter 4
Page 122
3
Printed Circuit
Boards (PCBs)
I / O Po w e r D r i v e r B o a r d S c h e m a t i c ( S h e e t 5 o f 5 )
2
1
D
C
NOTES:
R ALL RESISTOR VALUES ARE IN OHMS ( W ), 1/4W, 5%, UNLESS OTHERWISE SPECIFIED.
R ALL CAPACITOR VALUES ARE IN MICROFARADS ( mF ), UNLESS OTHERWISE SPECIFIED.
R 0.1 MICROFARADS ( mF ) BYPASS CAPACITOR ON ALL IC’S.
A
Schematic Set
Sheet 5 of 5
SIZE
REV.
E
D
SPI I/O Power Driver Board
SPI Part Nº: 520-5137-01
Prepared By: CES Inc. Edited By: SPI Inc.
Model: 237-0161-00 Dated: 09/05/97
2
Printed Circuit
Boards (PCBs)
1
Section 5, Chapter 4
Page 123
Sec. 5: PCBs
B
I / O Po w e r D r i v e r B o a r d C o m p o n e n t La y o u t
Test Points:
LED
TEST
•
¬TIP TPL3
¬BLANKING
¬L204 LED
•
•
TEST
TEST
•
TE
ST
•
TEST
¬RESET
LEDs :
¬L201+50v
¬L202+18v
¬L200+20v
TEST
•
LEDs
¬L203+12v
LED
TEST
•
TE
ST
•
¬FET TPL1
LED :
¬L2+5V
¬R116 POT
Actual Board Size 15.698” X 11”
TE
ST
•
Sec. 5: PCBs
Section 5, Chapter 4
Page 124
Printed Circuit
Boards (PCBs)
,23RZH U'ULYH U%RDUG3DUWV
ITEM
QTY
PART NUMBER
REF-DESIGNATOR
DESCRIPTION
—
01
02
03
04
05
06
07
08
1
5
13
1
1
5
1
1
17
520-5137-01
112-5000-00
125-5030-00
125-5033-00
125-5035-00
125-5036-00
125-5034-00
125-5032-00
125-5031-00
Complete PCB Assembly
DB3501
220pF, (221), Cap.
100uF, 150v, Radial Lytic Cap.
.1UF, 500v, Ceramic Disk Cap.
15000uF, 25v, Radial Lytic Cap.
4700uF, 35v, Radial Lytic Cap.
100uF, 25v, Radial Lytic Cap.
0.1uF, (104), Cap.
09
10
11
12
13
22
0
16
0
25
125-5028-00
n/a
125-5029-00
125-5027-00
112-0054-00
14
15
16
17
18
19
20
21
22
2
26
1
7
3
1
1
1
1
112-5003-00
205-0004-00
200-5000-03
200-5000-01
200-5000-08
200-5000-05
200-5000-06
045-5015-01
045-5014-01
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
1
0
1
1
1
1
1
1
6
16
16
10
1
32
16
17
8
11
13
045-5015-00
n/a
045-5013-00
045-0014-03
045-5015-00
045-0014-06
045-5016-00
045-0014-09
165-5099-00
110-0106-00
110-0067-00
110-0088-00
110-0069-00
121-5042-00
121-5003-00
121-5045-00
121-5021-00
121-5011-00
121-5007-00
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
8
2
1
1
2
2
1
1
0
9
8
1
2
8
1
1
8
1
1
1
2
1
1
121-5029-00
121-5033-00
121-5030-00
121-5039-00
121-5036-00
121-5038-00
121-5050-00
121-5009-00
n/a
121-5009-00
121-5032-00
190-5002-00
n/a
100-5012-00
110-0058-00
100-5023-00
110-0089-00
100-0356-00
n/a
100-0338-00
100-0148-00
100-0037-00
n/a
I/O Power Driver Board
BRDG1, BRDG2, BRDG3, BRDG20, BRDG21
C1, C2, C3>C6, C7, C8, C9>C10, C11, C12
C25
C26
C27, C30, C201, C202, C203
C29
C32
C35, C36, C37, C38, C39, C40, C41, C42, C43, C45,
C46, C200, C238, C239, C240, C241, C242
C212>C219, C228>C237, C243>C246 (C204-C211: NS)
(C220>C227: NS)
C247>C254, C263>C270
(C255>C262, C271>C278: NS)
D200>D207, D208>D215, D220, D221, D222, D223,
D224, D225, D226, D227
D217, D229 (D216: NS)
F6, F7, F8, F9, F20, F21, F22, F23, F24> F27, F28
F6
F7, F8, F9, F24>F27
F21, F20, F28
F22
F23
J1
J2 (Key Pin-4), J6 (Key Pin-9), J7 (Key Pin-5)
J10 (Key Pin-6), J13 (Key Pin-2)
J3 (Key Pin-8)
(J4, J5: NS)
J8 (Key Pin-2), J9 (Key Pin-3), J15 (Key Pin-5)
J11
J12 (Key Pin-7)
J14
J16 (Key Pin-14)
J17
L2, L200, L201, L202, L203, L204
Q1>Q16
Q17>Q24, Q25>Q32
Q33>Q42
Q200
R1>R8, R9>R16, R200>R207, R208>R215
R17>R24, R25>R32
R33>R42, R236>R242
R49, R57>R61, R253, R256, R270 (R252: NS)
R50>R56, R255, R271, R300
R64>R76
Resistors on Solder Side @ J2-Pins: 1-3 & 5-9
R90, R92, R94, R96, R98, R100, R102, R104
R114, R269
R115
R116
R117, R272
R216, R218
R217
R219
(R220>R227: NS)
R245>R251, R254, R302 (R228>R235: NS)
R261, R262, R263, R264, R265, R266, R267, R268
RELAY
TPL1, TPL3
U1, U2, U3, U4, U6, U18, U201, U206 (U200: NS)
U9
U210
U10, U11, U12, U13, U14, U15, U16, U17
U19
U19
U203 (U202: NS)
U204, U205
U209
470pF, (471), Axial Cap.
0.01uF, (103), 100v Cap.
0.1uF, (104), 100v, Cap.
1N4148, Diode
1N4004, Diode
Fuse Clips
7A 250v S.B. Fuse
5A 250v S.B. Fuse
3A 250v S.B. Fuse
8A 250v S.B. Fuse
4A 250v S.B. Fuse
20-Pin, 0.1 Dual Row Header
10PKK156
12PKK156
9PKK156
10-84-4030 (3-Pin MOLEX)
12PKK156
10-84-4060 (6-Pin MOLEX)
15PKK156
10-84-4090 (9-Pin MOLEX)
LED T1-3/4 DIFFUSER LED
22NE10L STP, Transistor
TIP122
19N06L STP, Transistor
2N3904, Transistor.
22K 1/4W Res.
620 1/4W Res.
39K 1/4W Res.
4.7K 1/4W Res.
10K 1/4W Res.
100 1/4W Res.
:
:
:
:
:
:
6.8K : 1/4W Res.
220 : 1/4W Res.
120 : 1/4W Res.
50 : Pot
330 : 1/4W Res.
1.5K : 1/2W Res.
4.7K : 2W Res. (SANDBAR)
1K : 1/4W Res.
1K : 1/4W Res.
47 : 1/4W Res.
FRL264D024/02CK Relay
Test Point Wire (24ga.) Loops
74HCT273
74LS245
DS1232
VN02N
LM338K
Heatsink (5v Reg.)
74HC245
74LS138
74LS74
Test Points
6HF3&%V
BLANKING, RESET
(NS = Not Stuffed)
3ULQWHG&LUFXLW
%RDUGV3&%V
6HFWLRQ&KDSWHU
3DJH
Yo u r N o t e s
Sec. 5: PCBs
Section 5, Chapter 4
Page 126
Printed Circuit
Boards (PCBs)
&386RXQG%RDUG7K HRU \ RI2SHUDWLRQ
CPU Section:
The CPU is a 68B09E (U209) with up to 8 MBytes of CPU Code Space (U210). The CPU code is bank selected
by the use of U211 and each bank consists of 16 KBytes. 8 KBytes of RAM (U212) is available to the CPU. The
RAM is battery backed and has a write protected area. Battery back up is accomplished by 3-AA Cells (BAT1)
which have a TEST POINT VBATT to check the battery voltage status. The write protected area consists of 512
Bytes used for storing game settings. This section of RAM can only be written to when the coin door is open. The
Coin Door switch comes into the CPU on CN6-12 and is fed into the address decoding PAL U213. When this
memory protect signal is low writes to the protected RAM area are prohibited. Address decoding for the system is
accomplished by one PAL U213 and one 1-of-8 decoder U214.
A watchdog is used to monitor the CPU and the 5v supply. If the 5v supply is below 4.75 the watchdog will hold
the CPU/Sound Board & I/O Board in reset. The watchdog must be fed at a rate of 250ms or faster. The signal
used to feed the watchdog comes from the EPROM Bank select signal used to load U211. The CPU has a timer
interrupt used as a heartbeat for the system this signal comes from counter U2. The clock for this counter is the
CPU Q CLOCK. Clearing the timer interrupt is done by reading the DIP Switch. The timer interrupt can be
observed at TEST POINT FIRQ. In normal operation "FIRQ" should be toggling at a rate of 976Hz.
The I/O Interface CN1 is buffered by two (2) HC245 Chips (U207 & U208). The CPU’s reset line is buffered by
Q10 and fed over to the I/O through CN1. An I/O Strobe Signal is fed through CN1-15 and is used to notify the I/O
that a valid address is being sent.
Switches:
The Switch Matrix consists of eight (8) 2N3904 Transistors(Q1-Q8) which pull one of 8 strobes ‘low’ to activate a
Single Column of switches. The Switch Return Signals are fed into CN7 [SWITCH ROWS] and are highly filtered
and compared to a 2.5v reference voltage. The Switch Return Voltage must be below 2.5v to make a Valid Switch
Closure. If false switches are appearing, check that none of the 2N3904 Transistors are permanently pulling the
strobe line low. Only one strobe from CN5 [SWITCH COLUMNS] should be low at any time. CN6 [DEDICATED
SWITCH IN] is a Dedicated Bank of Input Switches. Switches connected to CN6 are connected to ground instead
of a strobe and may be read at any time.
Plasma Interface:
The data path for communication to and from the Plasma Controller Board is 8 bits wide. There are separate
Input and Output Busses. The Input Bus from the Plasma Controller to the CPU/Sound Board comes in on CN8
[PLASMA CONTROL]-Pins 3-10 and is fed into U200 for input to the CPU’s Data Bus. Data going out to the
controller comes from the CPU’s Data Bus through U201 and onto CN8-Pins 11-18. Status back from the Plasma
Controller comes in on CN8-Pins 22-26 and is fed into U202 for input to the CPU’s Data Bus. Two control signals
that go out to the Plasma Controller are PRES [PLASMA RESET] and CN8-Pin 19 [PSTB - Plasma Strobe]. The
Plasma Reset is software controllable through U216/B and also has a test point "Plasma Reset". The Plasma
Strobe Signal to the controller is generated from U216/A and is used to latch data into the Plasma Controller.
Sound calls are made from the CPU’s 68B09E U209 to the sound section by latching data into U5. The
sound section’s CPU 68BO9E (U6) reads in this data and handles the interfacing to the BSMT.
Other Test Points:
E & Q - The CPU signals for both 68B09E processors. Should be at 2Mhz with Q leading E by 500 nsec.
24Mhz - The oscillator used for the BSMT & derivation of E & Q.
SND-FIRQ - The sound sections CPU Interupt.
6Mhz - This clock is generated internally on the BSMT and is used for shifting the data samples into th DAC.
W6 Jumper - This jumper must be installed for games that use 8MB Sound EPROMs (U17 U21 U36 U37). For
games which use 4MB Sound EPROMs this jumper is not installed but will operate on boards with W6 installed.
3ULQWHG&LUFXLW
%RDUGV3&%V
6HFWLRQ&KDSWHU
3DJH
6HF3&%V
Sound Section:
The audio section consists of a BSMT SOUND CHIP U9 Sound (Voice) EPROMs (U17 U21 U36 U37) 68B09E
U6 and Sound Code EPROM U7. The BSMT latches sound EPROM addresses in U13 & U12 for output to the
Sound EPROMs. Sound Data from the EPROMs is read through U19 to the BSMT. The EPROMs are bank
selected by U22. When the BSMT has sound data to be played out to the speakers it loads 16 bits into a 16 bit
shift register made up of U24 & U23. The data stream from the shift register is serially shifted into a stereo 16 bit
Digital to Analog Converter (DAC, U26). When the system is operating properly the ws (word select) input of the
DAC will be toggling. The ws input is used to latch the right and left channel sound data into the DAC. If the ws
line is not oscillating no analog signal will come out of the DAC. The DAC outputs are a controlled current source.
These outputs are converted to a voltage by an operational amplifier U30 to form the analog signal. TEST
POINTS AOR and AOL are the outputs of the operational amplifier. These outputs are then fed directly into the
power amplifiers (TDA2030A) or optionally into an analog volume control chip U35 for a potentiometer volume
control. The analog section has its own +5v & -5v derived from VR1 & VR2. These separate supply voltages are
for the DAC U26 Operational Amplifier U30 and analog volume control U35.
CPU/Sound Board Schematic (Sheet 1 of 3)
J
I
H
G
F
+5v
C1
C2
C3
C4
C5
C7
C8
C9
C12
C13
C14
C15
C16
C18
C19
C20
C21
C23
C24
C25
C26
C27
C28
C32
C36
C41
C42
C43
C44
0.1 mF 0.1 mF 0.1 mF 0.1 mF 0.1 mF 0.1 mF 0.1 mF 0.1 mF 0.1 mF 0.1 mF 0.1 mF 0.1 mF 0.1 mF 0.1 mF 0.1 mF 0.1 mF 0.1 mF 0.1 mF 0.1 mF 0.1 mF 0.1 mF 0.1 mF 0.1 mF 0.1 mF 0.1 mF 0.1 mF 0.1 mF 0.1 mF 0.1 mF
5
C272 C273 C274 C275 C276 C277 C278 C279 C280 C281 C282 C283 C284 C285 C286 C287 C288 C289 C291 C292
GND
0.1 mF 0.1 mF 0.1 mF 0.1 mF 0.1 mF 0.1 mF 0.1 mF 0.1 mF 0.1 mF 0.1 mF 0.1 mF 0.1 mF 0.1 mF 0.1 mF 0.1 mF 0.1 mF 0.1 mF 0.1 mF 0.1 mF 0.1 mF
1-5I
1-5J
+5v
1-5H
A13 U212 [26]
1-5G
A13 U212 [26]
5Q U211 [12]
+5v
2
JP1S
R301
10W
1
JP1
+5v
R306
+5v
32K
8K
10KW
+5v
R414
220W
N.C.
N.C.
+5v
L201
4
R302
R304
10W R303 10W R305
10W
10W
XA0
XA1
XA2
XA3
XA4
XA5
1Q
1D
2Q
2D
3Q
3D
4Q
4D
5Q
5D
6Q
6D
7Q
7D
8Q
8D
74LS374
U211
A13 U212 [26]
3
4
7
8
13
14
17
18
D0
D1
D2
D3
D4
D5
GND
A
* R308 IS JUMPERED
B
(2-2A) B
R309, R307
NOT STUFFED
(2-2A) C
R307
0W
R308
12
PR
Q
D
R309
9
CP
Q
8
R/W
13
VPP
D7
D7
D7
13
14
15
17
18
19
20
21
D0
D1
D2
D3
D4
D5
D6
D7
FIRQ
A0
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
A12
A13
A14
A15
1-3G
A16
A17
A18
DQ0
DQ1
DQ2
DQ3
DQ4
DQ5
DQ6
DQ7
U210
U210S
32PSKT
E
1-3I
E 24
1-3H
G
ROMCS 22
RAMCS
1-4F
E
E
12
11
10
9
8
7
6
5
27
26
23
25
4
28
29
3
2
30
31
A0
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
A12
A13
A14
A15
A0
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
A12
A13
XA0
XA1
XA2
XA3
XA4
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
A0
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
A12
A13
A14
A15
D0
D1
D2
D3
D4
D5
D6
D7
VCC
NMI
U209 FIRQ
IRQ
1-3F
N.C. 38 LIC
AVMA 36
AVMA
R/W 32
R/W
6
N.C.
BA
5
N.C.
BS
33
N.C.
BUSY
XA0
34
E
Q 35
40
HALT 37
RESET
Q
2
CP
CLR
HCT74
1-2I
Q
N.C.
RED
330W
A15
A14
A13
+5v
13
E
Q
1-2H
RESET
U209S
40PSKT
VMA
12
PR
R310
9
Q
D
CP
Q
N.C.
HCT74
AVMA 2
Sec. 5: PCBs
D
3
Q
1-1I
CP
CLR
GND 1
J
Section 5, Chapter 4
Page 128
1
CP
CLR
Q
PLASMA_RESET
Q 6
N.C.
6
N.C.
1
1-2F
/O 1
I/O 2
I/O 3
I/O 4
I/O 5
I/O 6
I/O 7
/O 8
19
18
17
16
15
14
13
12
+5v
ROMCS
RAMCS
IO PORT
A9
A10
SNDSTB
XA0
IO STB
PAL16V8Q
A8
A9
A10
1
2
3
A12
6
4
5
A7
+5v
A
B
C
U214
G1
G2A
G2B
Y0
Y1
Y2
Y3
Y4
Y5
Y6
Y7
15
14
13
12
11
10
9
7
SWLO
DPSW
BSEL
SWSTB
SWM
PLIN
POUT
STATUS
74LS138
RESET
PRES
PLIN
PSTB
VCC 20
5 VMA
5 PSTB
1-1H
HCT74
POUT
Q
74LS74A
PR
U216/A
1-1J
Q 3
4
2
PR
D
U215/A
PLIN
+5v
+5v
4
0W
13
U213S
20PSKT
+5v
R311
8
CLR
A11
A12
MPIN
PRES
0W
U216/B
POUT 11
A0
* R310 IS JUMPERED
10 GND
1
I/ 1
2
I/ 2
3
I/ 3
4
I/ 4
5
I/ 5
6
I/ 6
7
I/ 7
8
I/ 8
9
I/ 9
11
I/ 10
U213
E
Q
VMA
R/W
1-2G
A0
10
1
GND
L200
R312
8
RESET
A0
A0
1-1G
1-1F
POUT
GND 2
I
E
Q
ROMCS
U217/B
1-2J
R298
10KW
A10
9
+5v
RESET
PRES
PLIN
PSTB
POUT
+5v
H
G
R297
10KW
+5v
XA0
10
PR
D
E
+5v
R296
+5v 10KW
INT
AVMA
+5v
The above circuit(s) continue at the address shown (#-XY).
# = Sheet Number (1-5), X = Column Grid, Y = Row Grid
7
2
4
3
INT
Q
E
U215/B CLR [13]
BSEL
Q
E
U215/B CLR [13]
BSEL
11
D0
D1
D2
D3
D4
D5
D6
D7
31
30
29
28
27
26
25
24
TSC 39
USS 1
GND
68B09E
BSEL
E
27 R/W
U212S
28PSKT
R432
27C040
12
22 E
R/W
1
0W
The above circuit(s) continue at the address shown (#-XY).
# = Sheet Number (1-5), X = Column Grid, Y = Row Grid
D7
20 RAMCS
10KW
GND
* R300 NOT STUFFED
(2-2A) E
(2-2A) Q
(2-1A) E
(2-1A) BSEL
D0
D1
D2
D3
D4
D5
D6
D7
MS6264A
1-4G
R300
0W
1-3J
VCC
GND
11
12
13
15
16
17
18
19
R299
10KW
INT
XA5
E
CE
OE
14
+5v
CLR
74LS74A
D0
D1
D2
D3
D4
D5
D6
D7
U212
C290
0.1 mF
1N5817
BAT 1
Holds 3X 1.5v
AA Size Cells
GND
GND
D201
BSEL
E
N.C.
28
1-5F
A0
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
A12
A13
A14
1N5817
VBATT
1-4H
10KW
U215/B
11
0W
C
+5v
1-4I
10
D200
+5v
R431
RED
1-4J
(2-2A) A
3
OC
CP
2
5
6
9
12
15
16
19
A15
1 A15
11 BSEL
10
9
8
7
6
5
4
3
25
24
21
23
2
26
1
A0
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
A12
F
Printed Circuit
Boards (PCBs)
E
Q
CPU/Sound Board Schematic (Sheet 1 of 3)
E
D
C
B
A
DEDICATED SWITCH IN
D3
+5v
CN6
1
1N4004
12PKK156E
GND
CN6
2
R278 R279 R280 R281 R282 R283 R284 R285
1KW 1KW 1KW 1KW 1KW 1KW 1KW 1KW
R287
1-5E
1-5D
1-5C
12PKK156E
R286
1KW
1-5A
12PKK156E
CN6
4
SWLO
SWLO 19
1
GND
RAMCS
E
R/W
39KW
R289
G
DIR
D0
2
D1
D2
D3
D4
D5
D6
D7
3
4
5
6
7
8
9
B1
A1
U206
A2
B2
A3
B3
A4
B4
A5
B5
A6
B6
A7
B7
A8
B8
74HC245
12PKK156E
5
KEY
6
CN6
39KW
R290
18
39KW
R291
17
16
15
14
13
12
11
12PKK156E
CN6
7
39KW
R292
12PKK156E
39KW
R293
12PKK156E
39KW
R294
12PKK156E
39KW
R295
12PKK156E
CN6
8
CN6
9
10
MPIN
11
RAMCS
1-4E
E
39KW
C255
1-4D
C247 C248 C249 C250 C251 C252 C253 C254
CN6
4
1-4A
12
470pF 470pF 470pF 470pF 470pF 470pF 470pF 470pF
GND
CN6
12PKK156E
GND
1-4B
1-4C
0.1 mF
R/W
5
CN6
3
1-5B
39KW
R288
CN6
12PKK156E
GND
R/W
G
DIR
+5v
IO PORT
RESET
R297
10KW
4
A0
2
+5v
PR
D
Q
5
D1
D2
D3
D4
D5
D6
D7
17
16
15
14
13
12
11
N.C.
IO PORT 19
1
+5v
U217/A
SNDSTB 3
R298
10KW
CP
CLR
1-3E
HCT74
E
Q
SPRST
Q 6
A1
B1
U207
A2
B2
A3
B3
A4
B4
A5
B5
A6
B6
A7
B7
A8
B8
74HC245
2
3
4
5
6
7
8
9
C256 C257 C258 C259 C260 C261 C262 C263
GND
1-3D
1-3C
1
+5v
A0
RESET
RESET
A0
2
A1
A2
A3
A4
IO STB
RESET
A9
3
4
5
6
7
8
9
SND_RESET
N.C.
470pF 470pF 470pF 470pF 470pF 470pF 470pF 470pF
G
DIR
A1
B1
U208
1-3B
18
17
16
15
14
13
12
11
2
4
6
8
10
12
14
16
18
20
CN1
1
3
5
7
9
11
13
15
17
19
N.C.
3
1-3A
HDR2X10
A2
B2
A3
B3
A4
B4
A5
B5
A6
B6
A7
B7
A8
B8
74HC245
N.C. C264 C265 C266 C267 C268 C269 C270 C271
TO I/O
DATA
GND
470pF 470pF 470pF 470pF 470pF 470pF 470pF 470pF
GND
D0-D7
(2-2J, 3-2J)
SNDSTB
SPRST
RESET
IO RESET
SNDSTB
SPRST
RESET
SNDSTB
SPRST
RESET
IO RESET
RAMCS
IO PORT
1-2E
1-2D
IO RESET
1-2C
R412
3
2
1KW
SNDSTB
GND
MPIN
1-2A
Q10
2N3904
The above circuit(s) continue at the address shown (#-XY).
# = Sheet Number (1-5), X = Column Grid, Y = Row Grid
GND
The below circuit(s) continue at the address shown (#-XY).
# = Sheet Number (1-5), X = Column Grid, Y = Row Grid
1
R413
10KW
IO STB
1-2B
SWLO
DPSW
MPIN
DPSW
SWSTB
SWM
PLIN
POUT
STATUS
SWSTB
SWM
PLIN
POUT
STATUS
PRES
PSTB
RESET
PRES
(2-2J)
(2-1J)
(2-1J, 3-2J)
3-2J
(2-1A)
MPIN
(3-2J)
DPSW
(3-2J)
SWSTB
SWM
PLIN
POUT
STATUS
PRES
PSTB
(3-2J)
(3-2J)
(3-2J)
(3-2J)
(3-2J)
(3-2J)
(3-2J)
PRES
1-1A
1-1E
1-1D
PSTB
1-1C
1-1B
PSTB
Schematic Set
Sheet 1 of 3
1-1E
NOTES:
R ALL RESISTOR VALUES ARE IN OHMS ( W ), 1/4W, 5%, UNLESS OTHERWISE SPECIFIED.
R ALL CAPACITOR VALUES ARE IN MICROFARADS ( mF ), UNLESS OTHERWISE SPECIFIED.
R 0.1 mF BYPASS CAPACITORS FOR ALL INTEGRATED CIRCUITS (ICs).
R REMOVE W6 TO EMULATE SPI N1 520-5077-00 SOUND BOARD.
R W6 JUMPER MUST BE INSTALLED FOR GAMES USING 8MB ROM(S) AT LOCATIONS U17, U21, U36 AND/OR U37.
Fonts used in this Schematic: Arial (Arial.ttf) for normal text, Symbol Proportional BT (Symbpron.ttf) for Micro (m) and Ohm [Omega] (W) & Wingdings 2 (Windng2.ttf) for Special Symbols or Check Boxes.
E
Printed Circuit
Boards (PCBs)
D
C
B
SIZE
D
2
1
REV.
E
SPI CPU/Sound Board
SPI Part Nº: 520-5136-16
Prepared By: CES Inc. Edited By: SPI Inc.
Model: 237-0176-00 Dated: 07/22/99
A
Section 5, Chapter 4
Page 129
Sec. 5: PCBs
R296
10KW
D0
18
19 IO PORT
1 R/W
CPU/Sound Board Schematic (Sheet 2 of 3)
J
I
H
U18
5
F
U13
2-5I
2-5J
G
2-5H
U17
U24
2-5F
2-5G
U36
U18
U12
U23
4
2-4I
2-4J
2-4H
2-4F
2-4G
U22
U9
U37
U21
U19
U25/A
U34
BSMT
2000
3
2-3H
2-3I
2-3J
24MHz
CLOCK
2-3G
2-3F
U11
U16
U4
U10
/A
U5
U15
U10
/B
2
2-2G
2-2H
2-2J
2-2F
2-2I
U8/B
SND_FIRQ
U1/B
U7
U6
Sec. 5: PCBs
U8/B
1
3-2J
2-1J
2-1I
2-1H
2-1G
2-1F
The above circuit(s) continue at the address shown (#-XY).
# = Sheet Number (1-5), X = Column Grid, Y = Row Grid
J
Section 5, Chapter 4
Page 130
I
H
G
F
Printed Circuit
Boards (PCBs)
CPU/Sound Board Schematic (Sheet 2 of 3)
E
D
U34
C
B
A
VOL. POT
1A 1B 1C
U34
NOT STUFFED
CN3
U35
CN3
NOT
STUFFED
2-5B
U24
2-5E
2-5D
CN3
2-5C
2-5A
5
CN3
CN3
U26
CN3
U30/B
U100
U23
SPEAKER
OUTPUTS
U25/B
2-4E
2-4D
CN4
2-4B
2-4C
2-4A
U30/A
CN4
U101
U19
4
CN4
CN4
KEY
U34
CN4
FOR
8MB
EPROMS *W6 STUFFED
CN4
U34
U102
2-3E
2-3D
2-3C
2-3B
2-3A
2-2C
2-2B
2-2A
3
U20
U27/B
2-2E
2-2D
U2
U27/A
NOTES:
R ALL RESISTOR VALUES ARE IN OHMS ( W ), 1/4W, 5%,
UNLESS OTHERWISE SPECIFIED.
R ALL CAPACITOR VALUES ARE IN MICROFARADS ( mF ),
UNLESS OTHERWISE SPECIFIED.
R 0.1 mF BYPASS CAPACITORS FOR ALL INTEGRATED
CIRCUITS (ICs).
R REMOVE W6 TO EMULATE SPI N1 520-5077-00 SOUND
BOARD.
R W6 JUMPER MUST BE INSTALLED FOR GAMES USING
8MB ROM(S) AT LOCATIONS U17, U21, U36 AND/OR U37.
The above circuit(s) continue at the address shown (#-XY).
# = Sheet Number (1-5), X = Column Grid, Y = Row Grid
2
Fonts used in this Schematic: Arial (Arial.ttf) for normal text & Wingdings 2 (Windng2.ttf) for Special
Symbols or Check Boxes.
U1/A
U3
SW200
2-1E
2-1D
2-1A
2-1B
2-1C
Schematic Set
U218
Sheet 2 of 3
SIZE
D
1
REV.
E
SPI CPU/Sound Board
SPI Part Nº: 520-5136-16
Prepared By: CES Inc. Edited By: SPI Inc.
Model: 237-0176-00 Dated: 07/22/99
E
Printed Circuit
Boards (PCBs)
D
C
B
A
Section 5, Chapter 4
Page 131
Sec. 5: PCBs
The below circuit(s) continue at the address shown (#-XY).
# = Sheet Number (1-5), X = Column Grid, Y = Row Grid
CPU/Sound Board Schematic (Sheet 3 of 3)
J
I
PLASMA
CONTROLLER
CN8
5
H
F
R200-R207 NOT STUFFED
R208-R215
NOT STUFFED
CN8
3-5J
G
3-5I
3-5H
3-5F
3-5G
CN8
CN8
U200
CN8
CN8
CN8
CN8
CN8
CN8
C200-C207 NOT STUFFED
CN8
4
CN8
CN8
3-4J
3-4H
3-4I
3-4G
3-4F
U201
CN8
CN8
CN8
CN8
CN8
R409
NOT
STUFFED
CN8
CN8
CN8
CN8
3
CN8
3-3I
3-3J
DIODE D202
NOT STUFFED
3-3G
3-3F
3-3H
C408
NOT
STUFFED
CN8
CN8
CN8
2
3-2J
U202
3-2I
3-2H
3-2G
3-2F
POWER IN
CN2
CN2
The above circuit(s) continue at the address shown (#-XY).
# = Sheet Number (1-5), X = Column Grid, Y = Row Grid
CN2
CN2
KEY
CN2
Sec. 5: PCBs
1
NOTES:
R ALL RESISTOR VALUES ARE IN OHMS ( W ), 1/4W, 5%,
UNLESS OTHERWISE
SPECIFIED.
3-1J
R ALL CAPACITOR VALUES ARE IN MICROFARADS ( mF ),
UNLESS OTHERWISE SPECIFIED.
R 0.1 mF BYPASS CAPACITORS FOR ALL INTEGRATED
CIRCUITS (ICs).
R REMOVE W6 TO EMULATE SPI N1 520-5077-00 SOUND
BOARD.
R W6 JUMPER MUST BE INSTALLED FOR GAMES USING
8MB ROM(S) AT LOCATIONS U17, U21, U36 AND/OR U37.
3-1I
3-1H
U205
3-1G
3-1F
G
F
Fonts used in this Schematic: Arial (Arial.ttf) for normal text, Symbol Proportional BT (Symbpron.ttf) for
Micro (m) and Ohm [Omega] (W) & Wingdings 2 (Windng2.ttf) for Special Symbols or Check Boxes.
J
Section 5, Chapter 4
Page 132
I
H
Printed Circuit
Boards (PCBs)
CPU/Sound Board Schematic (Sheet 3 of 3)
E
D
C
B
A
D106 (Not Screened On Board)
This diode is soldered between D3 & R430 under CN6.
+5v
1N4004
SWITCH
COLUMNS
CN5
3-5E
3-5D
3-5C
3-5A
3-5B
KEY
5
CN5
CN5
CN5
CN5
U203
CN5
CN5
CN5
3-4E
4
3-4A
3-4B
3-4C
3-4D
SW300
8-POS.
DIP SWITCH
3-3E
U204
3-3D
3-3C
3-3B
3
3-3A
SWITCH
ROWS
U401/A
CN7
U401/B
CN7
CN7
3-2E
3-2D
3-2B
U401/C
3-2A
3-2C
CN7
2
CN7
CN7
U401/D
KEY
CN7
U401/A
CN7
3-1D
3-1E
U401/C
3-1C
3-1A
3-1B
Schematic Set
Sheet 3 of 3
SIZE
D
U401/D
1
REV.
E
SPI CPU/Sound Board
SPI Part Nº: 520-5136-16
Prepared By: CES Inc. Edited By: SPI Inc.
Model: 237-0176-00 Dated: 07/22/99
E
Printed Circuit
Boards (PCBs)
D
C
B
A
Section 5, Chapter 4
Page 133
Sec. 5: PCBs
CN7
U401/B
U205
VR1
•
CN2
6MHZ
U25
T
T
ES
•
U37
U37
U21
U21
U36
U36
U18
U17
U17
U9
U3
24MHZ
24MHZ
U19
X1
•
Actual Board Size
14.67” X 9.125”
•
•
VR2
ST
AOR
•
U30
T
TE
TEST
TEST
•
U26
TES
•
E
U13
U9
JP
L201
CN1
U12
L200
+5V
LED
+5V
U209
U208
U217
U214
SWITCH ROWS
U209
CN7
U211
U215
5
6
7
8
TEST
•
U207
U216
JP
JP
GND1
4
3 CUT
2
1
U218
RESET
U213
( -- ) SIZE AA 1.5V ( + )
•
PLASMA_RESET
•
U201
TEST
•
8K
32K
JP1
¬8K/32K JUMPER JP1
FIRQ
U202
JP
U200
TEST
SW200
TE
ST
SW200
U210
U210
U212
U212
( -- ) SIZE AA 1.5V ( + )
VBATT
BAT1
CN8
•
AOL
TEST
Q
T
SND_RESET
U34
JP
U24
U15
U2
ST
U35
JP
U6
W6
U22
U16
U23
U400
U401
TE
CN3
JP
TES
SND_FIRQ
U1
U27
U10
JUMPER REQUIRED
FOR 8MB EPROMS
GND2
•
U8
U6
U11
T
•
U100
U5
U4
U4
U204
1 2 3 4 5 6 7 8
TEST
U20
U7
U7
TES
•
U101
U102
JP
U206
DEDICATED SWITCH IN
U205
TEST
CN4
U203
SWITCH COLUMNS
­
SW300
T
ON 8-Pos. Dip Sw.
•
Section 5, Chapter 4
Page 134
•
•
BSMT2000
T
D15552N W -01A5HE9
TES
980
TEST
ES
T
TEST
C01100
24.000MHZ
RALTRON
98 TV 52
CN6
PLASMA CNTLR
( -- ) SIZE AA 1.5V ( + )
Sec. 5: PCBs
CN5
C P U / S o u n d B o a r d C o m p o n e n t La y o u t
Test Points:
¬VBATT
¬GND2
¬6MHZ
¬E
¬SND_FIRQ & Q
¬SND_RESET
¬AOL & AOR
Printed Circuit
Boards (PCBs)
TEST
¬FIRQ
¬SW200
¬PLASMA_RESET
¬GND1
¬RESET
LEDs :
¬L201+5v & L200
¬+5V
¬24MHZ
REQUIRED FOR
8MB EPROM USE
¬W6 JUMPER
•
&386RX QG%RDUG3DUWV
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
QTY
1
1
79
PART NUMBER
520-5136-16
545-5685-00
125-5031-00
REF-DESIGNATOR
DESCRIPTION
(NS = Not Stuffed)
CPU/Sound Board Mono (FCC FEB98)
Complete PCB Assembly
BAT1 HOLDER (Always replace all 3, Size AA 1.5v Cells, with new ones, when required)
C1, C2, C3, C4, C5, C7, C8, C9, C12, C13, C14, C15,
0.1uF, (104), Axial Cer. Cap.
C16, C18, C19, C20, C21, C23, C24, C25, C26, C28, C32, C33, C34, C36, C38, C39,
C41, C42, C43, C44, C47, C49, C110, C111, C113, C117, C118, C120, C123, C124, C125, C255, C272, C273, C274,
C275, C276, C277, C279, C280, C281, C282, C283, C284, C285, C286, C287, C288, C289, C290, C291, C292, C400>C401,
C402>C404, C405>C407 (C45, C46, C52, C103, C105, C106, C122: NS)
2
125-5017-00
C10, C35
10uF, 16v, Radial Tant. Cap.
3
125-5043-00
C29, C37, C51
0.001uF, (102), Cap.
1
125-5037-00
C30
1000uF, 16v, Radial Lytic Cap.
2
125-5019-00
C31, C81
470uF, 25v, Radial Lytic Cap.
4
125-5020-00
C40, C59, C108, C115 (C76, C77, C101: NS)
22uF, 25v, Radial Lytic Cap.
4
125-5039-00
C48, C50, C75, C80
0.0022uF, (222), Cap.
6
125-5017-00
C78, C79, C107, C114 (C100: NS)
10uF, 25v-35v, Radial Lytic Cap.
2
125-5015-00
C109, C112 (C102, C104: NS)
100uF, 25v, Rad. Ltc. Cap.
2
125-5012-00
C116, C119
220uF, 25v, Radial Lytic Cap.
0
125-5038-00
(C121: NS)
100pF, (101), Cap.
44
125-5028-00
C208>C215, C216>C220, C229, C230, C247>C254,
470pF, (471), Cer. Cap.
C256>C263, C264>C271 (C200>C207: NS)
8
125-5029-00
C221>C228 (C408: NS)
0.01uF, (103), 100v Cap.
1
125-5014-00
C409
22uF, 16v, Radial Lytic Cap.
1
045-5015-01
CN1
20-Pin, 0.1 HEADER
1
045-5015-06
CN2 (Key Pin-5) (CN3: NS)
6PKK156
1
045-5015-07
CN4 (Key Pin-5)
7PKK156
1
045-5013-00
CN5 (Key Pin-2)
9PKK156
1
045-5015-00
CN6 (Key Pin-5)
12PKK156
1
045-5014-01
CN7 (Key Pin-4)
10PKK156
X2
1
045-5015-26
CN8
26-Pin, 0.1 HEADER
7
112-5003-00
D1, D2, D3, D102, D103, D104, D105 (D100, D101: NS) 1N4004, Diode
2
112-5008-00
D200, D201
1N5817, Diode
8
112-0054-00
D400, D401, D402>D404, D405>D407 (D202: NS)
1N4148, Diode
6
n/a
(FB1)-FB2, FB3-(FB4), (FB5)-FB6
Ferrite Bead (if required, call Tech Support)
1
165-5099-00
L200, L201
LED T1-3/4 DIFFUSER LED
10
110-0069-00
Q1>Q8, Q10 (Q9 Not Used)
2N3904, Transistor
36
121-5011-00
R1>R3, R4, R106, R113, R224>R228, R244>R251,
10K 1/4W Res.
R260>R267, R296>R298, R299, R301, R302>R305,
R306, R413, R431>R432 (R200>R207, R409: NS)
1
121-5018-00
R7
1.5K 1/4W Res.
5
121-5023-00
R9, R14, R104, (R100, R102: NS)
22K 1/4W Res.
20
121-5009-00
R15, R8, R234>R241, R278>R286, R412
1K 1/4W Res.
2
121-5043-00
R16, R17 (R25, R112: NS)
2.2K 1/4W Res.
3
121-5051-00
R21, R22, R24 (R12, R13, R19: NS)
100K 1/4W Res.
2
121-5046-00
R105, R109 (R101: NS)
470K 1/4W Res.
2
121-5009-00
R107, R111 (R103: NS)
1K 1/4W Res.
9
121-5045-00
R108, R287>R294
39K Res.
11
121-5021-00
R216>R223, R242, R243, R400
4.7K 1/4W Res.
15
121-5033-00
R229>R233, R295, R414, R415>R422 (R208>R215: NS) 220 1/4W Res.
5
n/a
R308, R310, R315>R316, WX (R300,R307,R309,R311,R313>R314,WY:NS) 0 Jumper Wire (24ga.)
1
121-5036-00
R312
330 1/4W Res.
16
121-5047-00
R401>R402, R403>R405, R406>R408, R423>R430
560 1/4W Res.
2
121-5048-00
R410, R411
3.3K 1/4W Res.
1
n/a
SW200
B3F4000
1
181-5002-00
SW300
8-Pin, Dip Switch
5
100-0037-00
U1, U8, U25, U27, U215
74LS74
1
100-0249-00
U2
74HC4020
1
100-0049-00
U3
74LS163
1
105-0052-05
U4
6116 RAM
3
077-5208-00
U4, U7, U212
28-Pin, IC Dip Socket
6
100-0064-00
U5, U12, U13, U15, U16, U211
74LS374
1
100-0189-01
U6, U209
68B09E
3
077-5209-00
U6, U9, U209
40-Pin, IC Socket
Table)
U7
27512 EPROM
1 (See Pg. #
1
105-0116-00
U9
BSMT2000
1
100-0149-00
U10
74LS240
Table)
U17, U21, U36, U37, U210
27C040 EPROM
5 (See Pg. #
5
077-5217-00
U17, U21, U36, U37, U210
32-Pin, IC Socket
1
100-0043-00
U18
74ALS139
1
965-0136-00
U19 - YELLOW DOT
PAL16L8 (Programmed) YELLOW DOT
1
965-0137-00
U20 - WHITE DOT
PAL16L8 (Programmed) WHITE DOT
2
100-0022-00
U22, U11
74LS273
2
100-5008-00
U23, U24
74LS165
1
100-5018-00
U26
TDA1543
1
100-0375-00
U30
LM833
1
100-0027-00
U34
74LS04
0
100-5016-00
(U35: NS)
TDA1899
2
100-5016-20
U101, U102 (U100 : NS)
TDA2030A
3
535-5000-10
U101 (HS2), U102 (HS3) (U100 (HS1): NS)
AAVID 531102 (Heat Sink)
2
100-5012-00
U201, U203
74HCT273
6
100-0338-00
U202, U204, U205, U206, U207, U208 (U200: NS)
74HC245
1
105-5046-00
U212
MS6264A
1
965-6504-00
U213- BLUE DOT
PAL16L8 (Programmed) BLUE DOT
1
100-0148-00
U214
74LS138
2
100-5015-00
U216, U217
HCT74
1
100-5023-00
U218
DS1232
2
100-0377-00
U400, U401
LM339AN
4
n/a
VBATT, +5v, GND1, GND2
Test Point Wire (24ga.) Loops
1
124-5002-00
VR1
LM7905CT -5v Regulator
1
124-5001-00
VR2
LM7805CT +5v Regulator
6
n/a
W1, W5, W6* (*for 8MB EPROMs) (W2-W3, W4: NS)
0 Jumper Wire (24ga.)
1
140-0011-00
X1
24Mhz
AOR, AOL, SND_RESET, SND_FIRQ, Q, E, 6Mhz, 24Mhz, FIRQ, PLASMA_RESET, RESET (X2) Test Points
12
n/a
(call Tech. Support)
R110 (New Rev. Change Feb 02)
33K 1/4W Res.
1
3ULQWHG&LUFXLW
%RDUGV3&%V
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
W
W
6HF3&%V
ITEM
—
01
02
:
:
6HFWLRQ&KDSWHU
3DJH
(UK Only) Solenoid Expander PC Board Schematic
CN2
D1
R1
620 W ohm
CN2 to Coils to I/O J7-P1 20v BRN
5
Q1
TIP122
4
3
R4
22k
KEY
2
1
D2
R2
620 W ohm
Pin-1 GND
Pin-2 Key
Pin-3 ORG
Right Up/Down Post (Aux. 3)
Pin-4 RED
Center Up/Down Post (Aux. 2)
Pin-5 WHT
Left Up/Down Post (Aux. 1)
Q2
TIP122
R5
22k
CN1
1
2
3
KEY
D3
R3
620 W ohm
4
Q3
TIP122
CN1 to I/O J2 (AUX OUT)
Pin-1 ORG-BRN to J2-P1
Pin-2 ORG-RED to J2-P2
Pin-3 Key
Pin-4 ORG-BLK to J2-P3
Component Side
R6
22k
(UK Only) Solenoid Exp. PCB Component Layout & Parts
Component Side
Solder Side
Solder Side
Sec. 5: PCBs
SPI N1: 520-5192-00
ITEM
QTY
PART NUMBER
REF-DESIGNATOR
DESCRIPTION
—
1
2
3
4
5
6
7
1
1
1
3
3
3
3
1
520-5192-00
Solenoid Expander PC Board
CN1
CN2
D1, D2, D3
R1, R2, R3
R4, R5, R6
Q1, Q2, Q3
Not Shown
Complete PCB Assembly
Connector, 4X .156”
Connector, 5X .156”
1N914, Signal Diode
620W 1/4W CF Resistor
22KW 1/4W CF Resistor
Tip122 (NPN Darl. Transistor)
UK Post Cable Wiring Harness
112-5014-00
121-5003-00
121-5042-00
110-0067-00
036-5479-00-76
Section 5, Chapter 4
Page 136
Printed Circuit
Boards (PCBs)
Tournament Serial Inter face (TSI) Board Over view & Theor y of Operation
Sec. 5: PCBs
Order the Optional ToPS™ (Tournament Pinball System) Kit!
Call Technical Support at 1-800-542-5377 for more information
Printed Circuit
Boards (PCBs)
Section 5, Chapter 4
Page 137
To u r n a m e n t S e r i a l I n t e r f a c e B o a r d S c h e m a t i c ( S h e e t 1 o f 1 )
6
5
4
6
5
4
D
C
B
Sec. 5: PCBs
A
Section 5, Chapter 4
Page 138
Printed Circuit
Boards (PCBs)
To u r n a m e n t S e r i a l I n t e r f a c e B o a r d S c h e m a t i c ( S h e e t 1 o f 1 )
3
2
1
D
R42, R44 & R45
NOT STUFFED
C
A
Schematic Set
®
Sheet 1 of 1
SIZE
NOTES:
R ALL RESISTOR VALUES ARE IN OHMS ( W ), 1/4W, 5%, UNLESS OTHERWISE SPECIFIED.
R ALL CAPACITOR VALUES ARE IN MICROFARADS ( mF ), UNLESS OTHERWISE SPECIFIED.
R 0.1 MICROFARADS ( mF ) BYPASS CAPACITOR ON ALL IC’S.
3
Printed Circuit
Boards (PCBs)
2
REV.
A
D
SPI Tournament Serial Interface Bd.
SPI Part Nº: 520-5220-00
Non-Text Document
Prepared By: CES Inc. Edited By: SPI Inc.
Model: 237-0268-00 Dated: 08/2002
1
Section 5, Chapter 4
Page 139
Sec. 5: PCBs
B
To u r n a m e n t S e r i a l I n t e r f a c e B o a r d C o m p o n e n t La y o u t & Pa r t s
BETA brite® Electronic Color Message Display
Data
Cable
BETA brite® Power Cable
(Call Technical Support
if more information is required).
2 1
PNK-WHT
BLU-WHT
GRN-WHT
BRN-WHT
PNK
GRY
VIO
BLU
GRN
YEL
ORG
BRN
UK Aux. or Ticket / Coin
Dispenser Application Only
J7 OPTIONAL SERIAL PORT
FOR PRINTER OR LAPTOP
(call Technical Support for
more information, if required).
(Call Technical Support
if more information is required).
Moved from I/O Bd. J3
(if used)
Component Side
ITEM
QTY
PART NUMBER
REF-DESIGNATOR
DESCRIPTION
--
1
520-5220-00
Tournament Serial Interface (TSI) Board
PCB Assembly
Section 5, Chapter 4
Page 140
To From
TSI existing
J5 harness
12 11 10 9 8 7 6 5 4 3 2 1
12 11 10 9 8 7 6 5 4 3 2 1
}
1 2 3 4 5 6 7 8 9 10 11 12
}
1 2 3 4 5 6 7 8 9 11 10 12
* Carefully note Pin-Out
Sec. 5: PCBs
THIS SIDE:
The 9-Pin Break-Out Conn. on
above harness, for UK Aux.
or Ticket / Coin Dispenser
Application Only
}
}
PNK-WHT
BLU-WHT
GRN-WHT
BRN-WHT
PNK
GRY
VIO
BLU
GRN
YEL
ORG
BRN
(+5V) RED
(GND) BLK
To TSI
J3
To
TSI
J2
Connected to
I/O Power
Driver Bd. J3
FROM I/O
J16-P5
FROM I/O
J16-P11
* Carefully note Pin-Out
10 9 8 7 6 5 4 3 2 1
1 2 3 4 5 6 7 8 9 10
THIS SIDE:
Tournament Large Cable
Wiring Harness (036-5477-98)
Serial Interface to
I/O Power Driver Board
ORG-BRN
ORG-RED
ORG-BLK
KEY
ORG-YEL
ORG-GRN
ORG-BLU
ORG-VIO
ORG-GRY
ORG-WHT
(+5V) RED
(GND) BLK
12 11 10 1 2 3 4 5 9 6 7 8
}
}
DISPLAY
Moved
from I/O Bd. J2
(if used)
To
To Playfield
TSI
X3 Dot Display
J4
(Conn. under P/F)
}
* Carefully note Pin-Out
ELECTRONIC
COLOR MESSAGE
}
ORG-WHT
KEY
ORG-GRY
ORG-VIO
ORG-BLU
ORG-GRN
ORG-YEL
ORG-BLK
ORG-RED
ORG-BRN
1 2 3 5 6 7 8 9 4 10
J6 DATA
CABLE
TO BETA brite®
To
TSI
J1
Connected to
I/O Power
Driver Bd. J2
Printed Circuit
Boards (PCBs)
$S SHQGL[
$SSHQGL[HV$WKUR XJK$SSHQGL[
7DEOHRI&RQWHQWV
x$SSHQGL[$3LQEDOO*DPH)LUPZDUH7DEOH $$
GHVFULEHVWKH(3520ZLWKLWVFKLSVL]HWKH6WHUQ • 3LQEDOO,QF63,3DUW1ž
YHUVLRQLIDSSOLFDEOHDQG&38%RDUG&386RXQG%RDUG3LQORFDWLRQV
x$SSHQGL[%6HPL&RQGXFWRUV,&·V5HOD\V&URVV5HIHUHQFH7DEOH %
GHVFULEHVGLRGHVDQGWUDQVLVWRUVZLWK6RXUFH1ž63,3DUW1ž17(1ž(&*1ž
5DGLR6KDFN1ž5&$3DUW1ž,IDSSOLFDEOH
x$SSHQGL[&*DPH0IJ'DWH0DQXDO3DUW1ž&38-XPSHU7DEOH &
SURYLGHVWKH*DPH0DQXIDFWXUHG'DWH0DQXDO3DUW1žWKH&38YHUVLRQWKH
(35203RVLWLRQ-XPSHUV,QVWDOOHGDQG-XPSHUV5HPRYHGJDPHVVSHFLILHG
x$SSHQGL['%RDUG7\SH7DEOH ''
SURYLGHV%RDUG3DUW1žVIRU*DPHV/DVHU:DUWKURXJK%DWPDQ)RUHYHU)OLSSHU
6RXQG3RZHU6XSSO\'RW0DWUL['LVSOD\'LVSOD\&RQWUROOHU2372VDQGWKH
:KLWH6WDU%RDUG6\VWHP*DPHV$SROORWKURXJKFXUUHQW)OLSSHU,23RZHU
'ULYHU&386RXQG'LVSOD\3RZHU6XSSO\'RW0DWUL['LVSOD\'LVSOD\&RQWUROOHU
2372V)OLSSHU%RDUGZLWKWKH:KLWH6WDU%G6\VWHPIRU$*ROGHQ(\HRQO\
x$SSHQGL[(*HQHULF&RLO&URVV5HIHUHQFH*XLGH)OLSSHU&RLO7DEOH ((
SURYLGHVWKH&RLOVXVHGZLWK3DUW1žDQG*DXJH7XUQVRIWKHFRLO
x$SSHQGL[)0RWRU6SHFLILFDWLRQ7DEOH ))
SURYLGHVDOOWKH0RWRU)XQFWLRQ6SHFLILFDWLRQVDQG3DUW1 žIRU*DPHV/DVHU:DU
WKURXJKFXUUHQW
x$SSHQGL[*3DUW1XPEHU3UHIL[&ODVVLILFDWLRQ&RGHV*
H[SODLQVKRZRXU3DUW1XPEHUVDUHGHYHORSHGWRKHOSVRUWSDUWVHDVLHU
x$SSHQGL[+3OD\ILHOG,QVHUWV3ODVWLF/LJKW&RYHUV +
JLYHVDSLFWRUDOYLHZZLWKWKHQDPHDQG3DUW1žRIDOOWKHLQVHUWVXVHGDOVR
JLYHVWKH&RORU&RGH&KDUW
x$SSHQGL[,6WDQG8S7DUJHWV+DSS0RGXODU5HJXODU ,
JLYHVDSLFWRUDOYLHZZLWKWKHQDPHDQG3DUW1žRIDOOWKH6LQJOH6WDQG8S7DUJHWV
XVHGDOVRJLYHVWKH&RORU&RGH&KDUW
x$SSHQGL[-&RLQ&DUGV86$,QWHUQDWLRQDO -
JLYHVDSLFWRUDOYLHZZLWKWKHQDPHDQG3DUW1žRIDOOWKHFXUUHQW&RLQ&DUGVIRU86$
&DQDGD(XURDQGRWKHU,QWHUQDWLRQDO&RXQWULHV
x*ORVVDU\RI7HUPV/DVW3DJH
JLYHVGHILQLWLRQVRUH[SODQDWLRQVRIVRPHSLQEDOOWHUPVDQGDFURQ\PV
x/LPLWHG:DUUDQW\&DXWLRQV:DUQLQJV1RWLFHV /DVW3DJH
$SSHQGL[HV$7DEOHRI&RQWHQWV
$SSHQGL[HV$7DEOHRI&RQWHQWV
$33(1',;$
3LQEDOO*DPH)LUPZDUH7DEOH
(3520
&KLS
6L]H
3URJUDP
3DUW 1ž
86$
9HU
%G
/RF
CPU
Sound (Old)
Sound (Old)
Sound (Old)
(256K)
(256K)
(256K)
(256K)
965-0004-00
965-0005-00
965-0006-00
965-0007-00
LWAR.C5
C5
J5
J6
J7
960-5007-00
960-5007-00
960-5007-00
960-5007-00
Sound
Sound 1
Sound 2
(256K)
(512K)
(512K)
965-0008-00
965-0009-00
965-0010-00
7F
6F
4F
960-5007-00
960-7001-02
960-7001-02
Laser War
- OR -
5DZ
3DUW 1ž
(3520
Lethal Weapon 3
(256K)
(256K)
(512K)
(512K)
(256K)
965-0011-00
965-0012-00
965-0014-00
965-0015-00
965-0013-00
A4-6
A4-6
B5
C5
6F
4F
7F
960-5007-00
960-5007-00
960-7001-02
960-7001-02
960-5007-00
965-0016-00
965-0017-00
965-0019-00
965-0020-00
965-0018-00
A2-1
A2-1
B5
C5
6F
4F
7F
960-5007-00
960-5007-00
960-7001-02
960-7001-02
960-5007-00
965-0021-00
965-0022-00
965-0024-00
965-0025-00
965-0023-00
A2-4
A2-4
B5
C5
6F
4F
7F
960-5006-00
960-5007-00
960-7001-02
960-7001-02
960-5007-00
Torpedo Alley
CPU
CPU
Voice 1
Voice 2
Sound
(256K)
(256K)
(512K)
(512K)
(256K)
Time Machine
CPU
CPU
Voice 1
Voice 2
Sound
(128K)
(256K)
(512K)
(512K)
(256K)
Playboy 35th Anniversary
CPU
CPU
Voice 1
Voice 2
Sound
(256K)
(256K)
(512K)
(512K)
(256K)
965-0046-00
965-0047-00
965-0049-00
965-0050-00
965-0048-00
A2-4
A2-4
B5
C5
6F
4F
7F
960-5007-00
960-5007-00
960-7001-02
960-7001-02
960-5007-00
ABC Monday Night Football
CPU
CPU
Voice 1
Voice 2
Sound
(128K)
(256K)
(512K)
(512K)
(256K)
965-0031-00
965-0032-00
965-0034-00
965-0035-00
965-0033-00
A2-7
A2-7
B5
C5
6F
4F
7F
960-5006-00
960-5007-00
960-7001-02
960-7001-02
960-5007-00
Robocop
CPU
CPU
Voice 1
Voice 2
Sound
(256K)
(256K)
(512K)
(512K)
(256K)
965-0036-00
965-0037-00
965-0039-00
965-0040-00
965-0038-00
A3-4
A3-4
B5
C5
6F
4F
7F
960-5007-00
960-5007-00
960-7001-02
960-7001-02
960-5007-00
Phantom of the Opera
CPU
CPU
Voice 1
Voice 2
Sound
(128K)
(256K)
(512K)
(512K)
(256K)
965-0026-00
965-0027-00
965-0029-00
965-0030-00
965-0028-00
A3-2
A3-2
B5
C5
6F
4F
7F
960-5006-00
960-5007-00
960-7001-02
960-7001-02
960-5007-00
965-0041-00
965-0042-00
965-0044-00
965-0045-00
965-0043-00
A2-0
A2-0
B5
C5
6F
4F
7F
960-5007-00
960-5007-00
960-7001-02
960-7001-02
960-5007-00
(128K)
(256K)
(512K)
(512K)
(256K)
965-0051-00
965-0052-00
965-0054-00
965-0055-00
965-0053-00
A2-7
A2-7
B5
C5
6F
4F
7F
960-5006-00
960-5007-00
960-7001-02
960-7001-02
960-5007-00
(128K)
(256K)
(1M)
(1M)
(256K)
(512K)
965-0056-00
965-0134-00
965-0057-00
965-0058-00
965-0059-00
965-0060-00
A1-7
A1-7
B5
C5
F7
F5
F4
U8
960-5006-00
960-5007-00
960-5009-00
960-5009-00
960-5007-00
960-7001-02
B5
C5
F5/6
F4/5
F7
U8
960-5006-00
960-5007-00
960-5009-00
960-5009-00
960-5007-00
960-7001-02
Back to the Future
CPU
CPU
Voice 1
Voice 2
Sound
(256K)
(256K)
(512K)
(512K)
(256K)
The Simpsons
CPU
CPU
Voice 1
Voice 2
Sound
Checkpoint
CPU
CPU
Voice 1
Voice 2
Sound
Display
CP80
Teenage Mutant Ninja Turtles
CPU
CPU
Voice 1
Voice 2
Sound
Display
(128K)
(256K)
(1M)
(1M)
(256K)
(512K)
965-0061-00
965-0062-00
965-0063-00
965-0064-00
965-0065-00
965-0066-00
A1.04
A1.04
A1.04
Batman
CPU
CPU
Voice 1
Voice 2
Sound
Display
(128K)
(256K)
(2M)
(1M)
(256K)
(1M)
965-0067-00
965-0135-00
965-0068-00
965-0069-00
965-0070-00
965-0071-00
A1.06
A1.06
A1.06
B5
C5
U17
U21
U7
U8
960-5006-00
960-5007-00
960-5010-00
960-5009-00
960-5007-00
960-5009-00
Star Trek 25th Anniversary
CPU
Voice 1
Voice 2
Sound
Display
(512K)
(2M)
(2M)
(256K)
(1M)
965-0072-00
965-0073-00
965-0074-00
965-0075-00
965-0076-00
(512K)
(2M)
(2M)
(256K)
(1M)
965-0077-00
965-0078-00
965-0079-00
965-0080-00
965-0081-00
A2.01
A1.09
C5
U17
U21
U7
U8
960-7001-02
960-5010-00
960-5010-00
960-5007-00
960-5009-00
C5
U17
U21
U7
U8
960-7001-02
960-5010-00
960-5010-00
960-5007-00
960-5009-00
CPU
Voice 1
Voice 2
Sound
Display
A4.08
A4.01
86$
9HU
%G
/RF
5DZ
3DUW 1ž
(512K)
965-0082-00
A2.08
(2M)
965-0083-00
(2M)
965-0084-00
(256K)
965-0085-00
(2M)
965-0086-00
A2.06
(2M)
965-0087-00
A2.06
(Used on Display PCB 520-5055-00)
C5
U17
U21
U7
ROM 0
ROM 1
960-7001-02
960-5010-00
960-5010-00
960-5007-00
960-5010-00
960-5010-00
Display
-OR(4M)
965-0087-04
A2.06
(Used on Display PCB 520-5055-01)
ROM 0
960-5015-00
CPU
Voice 0
Voice 1
Sound
Display
Display
(512K)
965-0119-00
A1.03
(4M)
965-0132-00
(2M)
965-0133-00
(256K)
965-0131-00
(2M)
965-0120-00
A1.04
(2M)
965-0121-00
A1.04
(Used on Display PCB 520-5055-00)
C5
U17
U21
U7
ROM 0
ROM 1
960-7001-02
960-5015-00
960-5010-00
960-5007-00
960-5010-00
960-5010-00
Display
-OR(4M)
965-0122-00
A1.05
(Used on Display PCB 520-5055-01)
ROM 0
960-5015-00
C5
U17
U21
U7
ROM 0
960-7001-02
960-5015-00
960-5010-00
960-5007-00
960-5015-00
C5
U17
U21
U7
ROM 0
960-7001-02
960-5015-00
960-5010-00
960-5007-00
960-5015-00
C5
U17
U21
U7
ROM 0
960-7001-02
960-5015-00
960-5010-00
960-5007-00
960-5015-00
C5
U17
U21
U7
ROM 0
960-7001-02
960-5015-00
960-5010-00
960-5007-00
960-5015-00
C5
U17
U21
U36
U37
U7
ROM 0
960-7001-02
960-5015-00
960-5015-00
960-5015-00
960-5015-00
960-7001-02
960-5015-00
C5
U17
U21
U36
U7
ROM 0
960-7001-02
960-5015-00
960-5015-00
960-5015-00
960-7001-02
960-5015-00
C5
U17
U21
U36
U37
U7
ROM 0
960-7001-02
960-5015-00
960-5015-00
960-5015-00
960-5015-00
960-7001-02
960-5015-00
C5
U17
U21
U36
U7
ROM 0
ROM 3
960-7001-02
960-5015-00
960-5015-00
960-5015-00
960-7001-02
960-5015-00
960-5015-00
C5
U17
U21
U36
U7
ROM 0
ROM 3
960-7001-02
960-5015-00
960-5015-00
960-5015-00
960-7001-02
960-5015-00
960-5015-00
Star Wars
Rocky & Bullwinkle & Friends
CPU
Voice 0
Voice 1
Sound
Display
(512K)
(4M)
(2M)
(256K)
(4M)
965-0138-00
965-0139-00
965-0140-00
965-0141-00
965-0142-00
A1.30
A1.30
Jurassic Park
CPU
Voice 0
Voice 1
Sound
Display
(512K)
(4M)
(2M)
(256K)
(4M)
965-0143-00
965-0144-00
965-0145-00
965-0146-00
965-0147-00
A5.13
A5.10
Last Action Hero
CPU
Voice 0
Voice 1
Sound
Display
(512K)
(4M)
(2M)
(256K)
(4M)
965-0148-00
965-0149-00
965-0150-00
965-0151-00
965-0152-00
A1.12
A1.06
Tales from the Crypt
CPU
Voice 0
Voice 1
Sound
Display
(512K)
(4M)
(2M)
(256K)
(4M)
965-0157-00
965-0158-00
965-0159-00
965-0160-00
965-0161-00
A3.03
A3.01
The Who’s Tommy
CPU
Voice 1
Voice 2
Voice 3
Voice 4
Sound
Display
(512K)
(4M)
(4M)
(4M)
(4M)
(512K)
(4M)
965-0162-00
965-0165-00
965-0166-00
965-0167-00
965-0168-00
965-0164-00
965-0163-00
A4.00
A4.00
WWF Royal Rumble
CPU
Voice 1
Voice 2
Voice 3
Sound
Display
(512K)
(4M)
(4M)
(4M)
(512K)
(4M)
965-0169-00
965-0172-00
965-0173-00
965-0174-00
965-0171-00
965-0170-00
A1.06
A1.02
Guns N’ Roses
CPU
Voice 1
Voice 2
Voice 3
Voice 4
Sound
Display
(512K)
(4M)
(4M)
(4M)
(4M)
(512K)
(4M)
965-0175-00
965-0178-00
965-0179-00
965-0180-00
965-0181-00
965-0177-00
965-0176-00
(512K)
(4M)
(4M)
(4M)
(512K)
(4M)
(4M)
965-0182-00
965-0186-00
965-0187-00
965-0187-01
965-0185-00
965-0183-00
965-0184-00
A3.00
A3.00
Maverick *
CPU
Voice 1
Voice 2
Voice 3
Sound
Display*
Display*
A4.04
A4.01
A4.01
Mary Shelley’s Frankenstein *
CPU
Voice 1
Voice 2
Voice 3
Sound
Display*
Display*
(512K)
(4M)
(4M)
(4M)
(512K)
(4M)
(4M)
965-0188-00
965-0192-00
965-0193-00
965-0194-00
965-0191-00
965-0189-00
965-0190-00
(512K)
(4M)
(4M)
(512K)
(4M)
(4M)
965-0195-00
965-0196-00
965-0197-00
965-0199-00
965-0200-00
965-0201-00
Baywatch *
CPU
Voice 1
Voice 2
Sound
Display*
Display*
CPU
Voice 1
Voice 2
Sound
Display*
Display*
A1.03
A1.03
A1.03
(CPU Board 520-5003-04)
Batman Forever *
Hook
3URJUDP
3DUW 1ž
CPU
Voice 1
Voice 2
Sound
Display
Display
Secret Service
CPU
CPU
Voice 1
Voice 2
Sound
&KLS
6L]H
(512K)
(4M)
(4M)
(512K)
(4M)
(4M)
A4.00
A4.00
A4.00
C5
U17
U21
U7
ROM 0
ROM 3
960-7001-02
960-5015-00
960-5015-00
960-7001-02
960-5015-00
960-5015-00
(CPU Board 520-5003-04)
965-0202-00
965-0203-00
965-0204-00
965-0205-00
965-0206-00
965-0207-00
A3.02
A3.00
A3.00
C5
U17
U21
U7
ROM 0
ROM 3
960-7001-02
960-5015-00
960-5015-00
960-7001-02
960-5015-00
960-5015-00
* Note: Display EPROMS (4M) for Maverick thru Batman Forever require an access time of 120 Nsec or faster.
$SSHQGL[$
3LQEDOO*DPH
)LUPZDUH7DEOH
$33(1',;$
3LQEDOO*DPH)LUPZDUHIRU:KLWH6WDU%RDUG6\VWHP7DEOH
520
&KLS
6L]H
3URJUDP
3DUW 1ž
Game ROM
Sound
Display
Voice 1
Voice 2
Voice 3
(1M)
(512K)
(4M)
(4M)
(4M)
(4M)
965-0208-00
965-0212-00
965-0213-00
965-0209-00
965-0210-00
965-0211-00
Apollo 13 (Note 1)
86$ '07 %G
&KHFN 6XP /RF
5DZ
3DUW 1ž
A5.01 | $09FF
U210
U7
ROM 0
U17
U21
U36
960-5009-00
960-7001-02
960-5015-01
n/a (masked)
n/a (masked)
n/a (masked)
A5.00 | $B92B
Golden Eye (Note 1)
Game ROM
Sound
Display
Voice 1
Voice 2
(1M)
(512K)
(4M)
(4M)
(4M)
965-0214-42
965-0217-42
965-0218-42
965-0215-42
965-0216-42
A4.04 | $3FFF
U210
U7
A4.00 | $E6ED ROM 0
U17
U21
960-5009-00
960-7001-02
960-5015-01
n/a (masked)
n/a (masked)
965-0219-41
965-0221-41
965-0222-41
965-0220-41
965-0223-41
A4.05 | $E9FF
U210
U7
ROM 0
U17
U21
960-5009-00
960-7001-02
960-5015-01
960-5015-01
960-5015-01
U210
U7
ROM 0
U17
U21
960-5009-00
960-7001-02
960-5015-01
960-5015-01
960-5015-01
Twister (Note 2)
Game ROM
Sound
Display
Voice 1
Voice 2
(1M)
(512K)
(4M)
(4M)
(4M)
A4.01 | $FD01
ID4: Independence Day (Note 2)
Game ROM
Sound
Display
Voice 1
Voice 2
(1M)
(512K)
(4M)
(4M)
(4M)
965-0224-45
965-0227-45
965-0228-45
965-0225-45
965-0226-45
A2.02 | $9CFF
A2.00 | $ABF7
Space Jam (Note 2)
Game ROM
Sound
Display
Voice 1
Voice 2
Voice 3
(1M)
(512K)
(4M)
(4M)
(4M)
(4M)
965-0229-43
965-0233-43
965-0234-43
965-0230-43
965-0231-43
965-0232-43
A3.00 | $E6FF
A3.00 | $0057
U210
U7
ROM 0
U17
U21
U36
960-5009-00
960-7001-02
960-5015-01
960-5015-01
960-5015-01
960-5015-01
The Star Wars Trilogy - Special Edition (S.E.) (Note 2)
Game ROM
Sound
Display
Voice 1
Voice 2
(1M)
(512K)
(4M)
(4M)
(4M)
965-0235-56
965-0238-56
965-0239-56
965-0236-56
965-0237-56
A4.03 | $5EFF
A4.00 | $8817
U210
U7
ROM 0
U17
U21
960-5009-00
960-7001-02
960-5015-01
960-5015-01
960-5015-01
U210
U7
ROM 0
U17
U21
960-5009-00
960-7001-02
960-5015-01
960-5015-01
960-5015-01
(1M)
(512K)
(4M)
(4M)
(4M)
965-0240-53
965-0243-53
965-0244-53
965-0241-53
965-0242-53
A2.02 | $C8FF
A2.01 | $7F46
U210
U7
ROM 0
U17
U21
960-5009-00
960-7001-02
960-5015-01
960-5015-01
960-5015-01
U210
U7
ROM 0
U17
U21
U36
960-5009-00
960-7001-02
960-5015-01
960-5015-01
960-5015-01
960-5015-01
U210
U7
ROM 0
U17
U21
U36
U37
960-5009-00
960-7001-02
960-5015-01
960-5015-01
960-5015-01
960-5015-01
960-5015-01
U210
U7
ROM 0
U17
U21
U36
U37
960-5009-00
960-7001-02
960-5015-01
960-5015-01
960-5015-01
960-5015-01
960-5015-01
U210
U7
ROM 0
U17
U21
U36
U37
960-5009-00
960-7001-02
960-5015-01
960-5015-01
960-5015-01
960-5015-01
960-5015-01
U210
U7
ROM 0
U17
U21
U36
U37
960-5009-00
960-7001-02
960-5015-01
960-5016-00
960-5016-00
960-5016-00
960-5016-00
U210
U7
ROM 0
U17
U21
U36
U37
960-5009-00
960-7001-02
960-5015-01
960-5016-00
960-5016-00
960-5016-00
960-5015-01
The X-Files (Note 2)
Game ROM
Sound
Display
Voice 1
Voice 2
(1M)
(512K)
(4M)
(4M)
(4M)
965-0245-46
965-0248-46
965-0249-46
965-0246-46
965-0247-46
A3.03 | $A2FF
A3.00 | $66D0
Starship Troopers (Note 3)
Game ROM
Sound
Display
Voice 1
Voice 2
Voice 3
(1M)
(512K)
(4M)
(4M)
(4M)
(4M)
965-0250-59
965-0253-59
965-0254-59
965-0251-59
965-0252-59
965-0255-59
A2.01 | $85FF
A2.00 | $E77B
Viper Night Drivin’ (Note 4)
Game ROM
Sound
Display
Voice 1
Voice 2
Voice 3
Voice 4
(1M)
(512K)
(4M)
(4M)
(4M)
(4M)
(4M)
965-0266-35
965-0271-35
965-0272-35
965-0267-35
965-0268-35
965-0269-35
965-0270-35
A2.01 | $C5FF
A2.01 | $C17D
&KLS
6L]H
3URJUDP
3DUW 1ž
86$ '07 %G
&KHFN 6XP /RF
5DZ
3DUW 1ž
Game ROM
Sound
Display
Voice 1
Voice 2
Voice 3
Voice 4
(1M)
(512K)
(4M)
(8M)
(8M)
(8M)
(8M)
965-0326-68
965-0327-68
965-0328-68
965-0329-68
965-0330-68
965-0331-68
965-0332-68
A1.02 | $E4FF
U210
U7
ROM 0
U17
U21
U36
U37
960-5009-00
960-7001-02
960-5015-01
960-5016-00
960-5016-00
960-5016-00
960-5016-00
965-0339-73
965-0340-73
965-0341-73
965-0342-73
965-0343-73
965-0344-73
965-0345-73
A1.00 | $D2FF
U210
U7
A1.01 | $845A ROM 0
not on website: U17
code through U21
Distributor
U36
only.
U37
960-5009-00
960-7001-02
960-5015-01
960-5016-00
960-5016-00
960-5016-00
960-5016-00
Striker Xtreme (Notes 4, 5)
A1.03 | $1957
NFL (Notes 4, 5)
Game ROM
Sound
Display
Voice 1
Voice 2
Voice 3
Voice 4
(1M)
(512K)
(4M)
(8M)
(8M)
(8M)
(8M)
Sharkey’s Shootout (Notes 4, 5)
Game ROM
Sound
Display
Voice 1
Voice 2
Voice 3
(1M)
(512K)
(4M)
(8M)
(8M)
(8M)
965-0333-72
965-0334-72
965-0335-72
965-0336-72
965-0337-72
965-0338-72
A2.11 | $49FF
A2.01 | $6C33
U210
U7
ROM 0
U17
U21
U36
960-5009-00
960-7001-02
960-5015-01
960-5016-00
960-5016-00
960-5016-00
U210
U7
ROM 0
U17
U21
U36
U37
960-5009-00
960-7001-02
960-5015-01
960-5016-00
960-5016-00
960-5016-00
960-5016-00
U210
U7
ROM 0
U17
U21
U36
U37
960-5009-00
960-7001-02
960-5015-01
960-5016-00
960-5016-00
960-5016-00
960-5016-00
U210
U7
ROM 0
U17
U21
U36
U37
960-5009-00
960-7001-02
960-5015-01
960-5016-00
960-5016-00
960-5016-00
960-5016-00
U210
U7
ROM 0
U17
U21
U36
U37
960-5009-00
960-7001-02
960-5015-01
960-5016-00
960-5016-00
960-5016-00
960-5016-00
High Roller Casino (Notes 4, 5)
Game ROM
Sound
Display
Voice 1
Voice 2
Voice 3
Voice 4
(1M)
(512K)
(4M)
(8M)
(8M)
(8M)
(8M)
Austin Powers
Game ROM
Sound
Display
Voice 1
Voice 2
Voice 3
Voice 4
(1M)
(512K)
(4M)
(8M)
(8M)
(8M)
(8M)
965-0346-65
965-0347-65
965-0348-65
965-0349-65
965-0350-65
965-0351-65
965-0352-65
A3.00 | $90FF
A3.00 | $74B3
(Notes 4, 5)
965-0353-74
965-0354-74
965-00355-74
965-0356-74
965-0357-74
965-0358-74
965-0359-74
A3.02 | $5DFF
A3.00 | $6A34
Monopoly® (Notes 4, 5)
The Lost World: Jurassic Park (Note 2)
Game ROM
Sound
Display
Voice 1
Voice 2
520
Game ROM
Sound
Display
Voice 1
Voice 2
Voice 3
Voice 4
(1M)
(512K)
(4M)
(8M)
(8M)
(8M)
(8M)
965-0360-75
965-0361-75
965-0362-75
965-0363-75
965-0364-75
965-0365-75
965-0366-76
A3.03 | $5EFF
A3.01 | $A381
Playboy (Notes 4, 5, 7)
Game ROM
Sound
Display
Voice 1
Voice 2
Voice 3
Voice 4
(1M)
(512K)
(4M)
(8M)
(8M)
(8M)
(8M)
965-0367-76
965-0368-76
965-0369-76
965-0370-76
965-0371-76
965-0372-76
965-0373-76
RollerCoaster Tycoon
Sound
Game ROM
Voice 1
Voice 2
Voice 3
Voice 4
Display
(512K)
(1M)
(8M)
(8M)
(8M)
(8M)
(4M)
A5.00 | $7DFF
A5.00 | $A5FF
(Notes 4, 5, 7)
965-0374-78
965-0375-78
965-0377-78
965-0378-78
965-0379-78
965-0380-78
965-0376-78
U7
A7.01 | $40FF U210
U17
U21
U36
U37
A7.00 | $8E23 ROM 0
960-7001-02
960-5009-00
960-5016-00
960-5016-00
960-5016-00
960-5016-00
960-5015-01
Lost In Space (Note 4)
Game ROM
Sound
Display
Voice 1
Voice 2
Voice 3
Voice 4
(1M)
(512K)
(4M)
(4M)
(4M)
(4M)
(4M)
965-0282-60
965-0287-60
965-0288-60
965-0283-60
965-0284-60
965-0285-60
965-0286-60
A1.01 | $B2FF
965-0289-40
965-0294-40
965-0295-40
965-0290-40
965-0291-40
965-0292-40
965-0293-40
A2.05| $B1FF
A1.02 | $32AB
Current as of:
Godzilla (Note 4)
Game ROM
Sound
Display
Voice 1
Voice 2
Voice 3
Voice 4
(1M)
(512K)
(4M)
(4M)
(4M)
(4M)
(4M)
A2.00 | $C929
South Park (Notes 4, 5)
Game ROM
Sound
Display
Voice 1
Voice 2
Voice 3
Voice 4
(1M)
(512K)
(4M)
(8M)
(8M)
(8M)
(8M)
965-0301-71
965-0306-71
965-0307-71
965-0302-71
965-0303-71
965-0304-71
965-0305-71
A1.03 | $58FF
A1.01 | $166F
Harley-Davidson® (Notes 4, 5, 6)
Game ROM
Sound
Display
Voice 1
Voice 2
Voice 3
Voice 4
(1M)
(512K)
(4M)
(8M)
(8M)
(8M)
(4M)
965-0319-67
965-0320-67
965-0321-67
965-0322-67
965-0323-67
965-0324-67
965-0325-67
A1.03 | $3EFF
A1.04 | $FC7C
look for
updated code
in late 2002
for new HDs.
footnotes:
1 ROMs on CPU/Sound Bd.: 520-5136-00 (Stereo) & Display Cont. Bd.: 520-5055-01
2 ROMs on CPU/Sound Bd.: 520-5136-10 (Mono) & Display Cont. Bd.: 520-5055-01
3 ROMs on CPU/Sound Board: 520-5136-15* (Mono) (*FCC 11-97) &
Display Controller Board: 520-5055-02* (*FCC 11-97)
4 ROMs on CPU/Sound Bd.: 520-5136-16† (Mono) (†FCC 02-98) &
Display Controller Board: 520-5055-03‡ (‡FCC 02-98)
5 This game uses 8MB VOICE ROMS at U17, U21, U36 & U37 (if 3 ROMs use U37 will
be unused) requiring a Jumper at Loc. W6. Refer to CPU/Snd. Bd. Schematic (2 of 3).
6 Harley-Davidson® 2nd Edition: For Game ROM, Sound & Display info (version, check
sums, part numbers) call Tech Support. Check our website (see back cover) for current
versions or other info. Raw Part numbers are identical to the Harley-Davidson® original.
7. ToPS (Tournament Pinball System) READY!
Game Revisions can be updated after the Production Run. This Table is accurate as of the printing of this manual. If any changes occurred, the next game manual will include the updated
information. The version stated is USA. If there is a question of as to the latest Code Revision & Check Sum call our Technical Support Department, 1-800-542-5377 or 1-708-345-7700
(Select Option 1). Visit our website www.SternPinball.com where code can be downloaded (an EPROM Burner is required).
3LQEDOO*DPH
)LUPZDUH7DEOH
$SSHQGL[$
$33(1',;%
6HPL&RQGXFWRUV,QWHJUDWHG&LUFXLWV,&5HOD\V&URVV5HIHUHQFH7DEOH
7DEOH
1ž
5DGLR
6RXUFH
67(51•
( & *Š
5 & $Š
1 7 (Š
6KDFNŠ
1XPEHU
3,1%$//
5(&7,),&$7,21 %/2&.,1* '$03(1,1* ',2'(6 $1'25 /,*+7 (0,77,1* ',2'(6 /('V
7\SH
Diode
Diode
Diode
Diode
Diode
Diode
Diode, Signal
LED
1N4001
1N4004
1N5401
1N5404
T6A10L
FR302
1N914
MT5000UR or
TLRH180P
(T1-3/4 GaAIAs)
112-5001-00
112-5003-00
112-0056-00
112-5004-00
112-5006-01
112-5009-00
112-5014-00
165-5052-00
NTE552
NTE116
NTE5801
NTE5804
NTE5812
NTE588
-—-—-
ECG552
ECG116
ECG5801
ECG5804
ECG5812
ECG588
-—-—-
-—-—276-1103
276-1143
276-1144
-—-—-—-—-—-—-
SK9000
SK3312
SK9004
SK9007
-—-—SK5014
-—-—-
(old SPI Part N:
165-5100-00)
-—-—-
-—-—-
276-066B
-—-—-
1N4742A 12v
1N4760B 68v
1N4764A 100v
1N5228 3.9v
1N5234B 6.2v
1N5379 110v
1N6267A 6.8v
1N4752A 33v
1N4736 6.8v 1w
112-0061-00
112-0062-00B
112-0049-00A
112-0053-00
112-0047-00B
112-0072-00
112-5011-00
112-5010-00A
112-5007-00
NTE142A
NTE5092A
NTE5096A
NTE5007A
NTE5013A
NTE5157
NTE4902
NTE147A
NTE5071A
ECG142A
ECG5092A
ECG5096A
ECG5007A
ECG5013A
ECG5157
ECG4902
ECG147A
ECG5071A
276-563
-—-—-—-—-—-—276-561
-—-—-—-—-—-—-—-—-
SK12V
SK68V
SK100V
SK3A9
SK6A2
SK110X
-—-—SK33V
-—-—-
ECG2987
ECG2985
-—-—ECG85
ECG48
ECG157
ECG287
ECG123AP
ECG261
ECG375
ECG288
ECG292
ECG374
ECG278
ECG332
ECG292
ECG393
ECG5400
ECG5461-8
-—-—-—-—-—-—276-2009
-—-—-—-—-—-—276-2009
276-2068
-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—-—276-1067
-—-—-
-—-—-—-—-—-—SK3124A
SK4906
SK3747
SK3232
-—-—SK3896
SK9118
SK3434
SK3441
SK9042
SK3434
SK9236
SK3441
SK3961
SK3950
-—-—-
=(1(5 ',2'(6
Diode
Diode
Diode
Diode
Diode
Diode
Diode
Diode
Diode
75$16,67256 7<3( )(7 131 313 $1'25 6&5
FET Trans.
FET Trans.
FET Trans.
NPN Trans.
NPN Trans.
NPN Trans.
NPN Trans.
NPN Trans.
NPN Trans.
NPN Trans.
PNP Trans.
PNP Trans.
PNP Trans.
PNP Trans.
PNP Trans.
PNP Trans.
PNP Trans.
SCR Trans.
SCR Trans.
STP20N10L
STP19N06L
VN02N
2N4401
2N6427
MJE340
MPSA42
2N3904
TIP122
MJE15030
2N5401
MJE15031
MJE350
MPSA92
TIP42
TIP32C
TIP36C
2N5060
SCR2800B
110-0106-00
110-0088-00
110-0089-00
110-0073-00
110-0070-00
110-0071-00
110-0082-00
110-0069-00
110-0067-00
110-0101-00
110-0078-00
110-0103-00
110-0072-00
110-0100-00
110-0068-00
110-0081-00
110-0077-00
110-0074-00
110-0083-00
%5,'*( 5(&7,),(56 %5
BR (Present)
DB3501 or
CM3501
&RPPHQWV
112-5000-00
5(/$<6
Relay
Relay
$SSHQGL[%
NTE2987
NTE2985
-—-—NTE85
NTE48
NTE157
NTE287
NTE123AP
NTE261
NTE375
NTE288
NTE292
NTE374
NTE288
NTE332
NTE292
NTE393
NTE5400
NTE5461-8
For White Star I/O Bds., BR = 35 Amp @ 100v P.I.V.
&RPPHQWV
FRL-264
D024/02CK
FRL-264
D006/04CV
190-5002-00
190-5001-00
For PPB, Power Supply, & White Star I/O Boards,
Relay = 24v DC 10 Amp DPDT
For CPU Boards,
Relay = 6v DC 5 Amp 4 Pole DT
6HPL&RQGXFWRUV,QWHJUDWHG&LUFXLWV
5HOD\V&URVV5HIHUHQFH7DEOH
$33(1',;&
5B, 5C
J4
J5
2
5B, 5C
J4
J5
2
5B, 5C
J4
J5
2
5B, 5C
J4
J5
2
5B, 5C
J4
J5
2
5B, 5C
J4
J5
2
5B, 5C
J4
J5
3
5B, 5C
J4
J5
3
5B, 5C
J4
J5
3
5B, 5C
J4
J5
3
5B, 5C
J4
J5
3
5B, 5C
J4
J5
3
5C
J5
J4
3
5C
J5
J4
3
5C
J5
J4
3
5C
J5
J4
3
5C
J5
J4
-XPSHUV
,QVWDOOHG
3
5C
J5
J4
3
5C
J5
J4
3
5C
J5
J4
3
5C
J5
J4
3
5C
J5
J4
3
5C
J5
J4
3
5C
J5
J4
3
5C
J5
J4
3
5C
J5
J4
3
5C
J5
J4
-XPSHUV
5HPRYHG
2
29. Apollo
13 (A13)
30. Golden
Eye
31.
Twister
32. ID4: Independence Day
33. Space
Jam
34. The Star
Wars Trilogy - S.E.
35. The Lost
World: J.P.
36. The
X-Files
37. Starship
Troopers
38. Viper
Night Drivin’
39. Lost
In Space
40.
Godzilla
41. South
Park
42a. HarleyDavidson®
42b. HarleyDavidson® 2nd Ed.
43a. Striker
Xtreme
43b.
NFL
44. Sharkey’s
Shootout
45. High Roller
Casino
46. Austin
Powers•
47.
Monopoly®
48.
Playboy
-XPSHUV
,QVWDOOHG
J5 J6 J7b
J5 J5b J6b
*DPH 0IJ
'DWH DQG
0DQXDO 31ž
(3520
3RVLWLRQ
J4 J6a J7a
J4 J5a J6a
†VHH 1RWH
5C
5B, 5C
†VHH 1RWH
1
2
*DPH 1DPH
&38 9HU
MAY 87
780-5001-00
MAR 88
780-5002-00
AUG 88
780-5003-00
DEC 88
780-5004-00
MAY 89
780-5005-00
SEP 89
780-5007-00
NOV 89
780-5006-00
JAN 90
780-5008-00
JUN 90
780-5009-00
SEP 90
780-5012-00
FEB 91
780-5010-00
MAY 91
780-5017-00
JUL 91
780-5011-00
OCT 91
780-5014-00
JAN 92
780-5019-00
JUN 92
780-5026-00
OCT 92
780-5024-00
FEB 93
780-5022-00
APR 93
780-5020-00
AUG 93
780-5027-00
NOV 93
780-5018-00
FEB 94
780-5028-00
MAY 94
780-5023-00
JUL 94
780-5029-00
SEP 94
780-5031-00
DEC 94
780-5036-00
MAR 95
780-5033-00
JUL 95
780-5038-00
(3520
3RVLWLRQ
1. Laser
War
2. Secret
Service
3. Torpedo
Alley
4. Time
Machine
5. Playboy 35th
Anniversary
6. ABC Monday
Night Football
7.
Robocop
8. Phantom of
the Opera
9. Back to
the Future
10. The
Simpsons
11.
Checkpoint
12. Teenage Mutant
Ninja Turtles
13.
Batman
14. Star Trek
25th Anniversary
15.
Hook
16. Lethal
Weapon 3
17. Star
Wars
18. Rocky & Bullwinkle & Friends
19. Jurassic
Park
20. Last
Action Hero
21. Tales from
the Crypt
22. The
Who’s Tommy
23. WWF
Royal Rumble
24.
Guns-N’-Roses
25.
Maverick
26. Mary Shelley’s
Frankenstein
27.
Baywatch
28. Batman
Forever
*DPH 0IJ
'DWH DQG
0DQXDO 31ž
&38 9HU
*DPH 1DPH
-XPSHUV
5HPRYHG
*DPH0IJ'DWH0DQXDO3DUW1ž&38-XPSHU7DEOH†
NOV 95
780-5044-00
FEB 96
780-5042-00
APR 96
780-5041-00
JUL 96
780-5045-00
OCT 96
780-5043-00
FEB 97
780-5056-00
JUN 97
780-5053-00
AUG 97
780-5046-00
NOV 97
780-5059-00
FEB 98
780-5035-00
JUN 98
780-5060-00
SEP 98
780-5040-00
JAN 99
780-5071-00
AUG 99
780-5067-01
JUN 02
780-5067-10
MAR 00
780-5068-01
OCT 00
780-5073-00
OCT 00
780-5072-01
JAN 01
780-5065-00
MAY 01
780-5074-00
SEP 01
780-5075-00
FEB 02
780-5076-00
—
U210
n/a
n/a
—
U210
n/a
n/a
—
U210
n/a
n/a
—
U210
n/a
n/a
—
U210
n/a
n/a
—
U210
n/a
n/a
—
U210
n/a
n/a
—
U210
n/a
n/a
—
U210
n/a
n/a
—
U210
n/a
n/a
—
U210
n/a
n/a
—
U210
n/a
n/a
—
U17 U21
U36 U37
W6
CPU/Snd.
n/a
—
U17 U21
U36 U37
CPU/Snd.
—
U17 U21
U36 U37
CPU/Snd.
—
U17 U21
U36 U37
CPU/Snd.
—
U17 U21
U36 U37
CPU/Snd.
—
U17 U21
U36
CPU/Snd.
—
U17 U21
U36 U37
CPU/Snd.
—
U17 U21
U36 U37
CPU/Snd.
—
U17 U21
U36 U37
CPU/Snd.
—
U17 U21
U36 U37
CPU/Snd.
W6
W6
n/a
n/a
W6
W6
W6
W6
W6
W6
W6
n/a
n/a
n/a
n/a
n/a
n/a
n/a
† Additional Information for Installed / Removed Jumpers (List 1-28 only):
Board Combinations with ROM at Location 5C (Game 1, Ver1) Installed J1b, J3, J4, J6a, J7a & J8 Removed J1a, J2, J5, J6 & J7b
Board Combinations w/ ROM at Locations 5B, 5C (Game 1, Ver2) Installed J1b, J3, J4, J5a, J6a, J7b & J8 Removed J1a, J2, J5, J5b, J6b, & J7a
Board Combinations w/ ROM at Locations 5B, 5C (Games 2-12, Ver2/3) Installed J1b, J3, J4, J5b, J6b, J7b & J8 Removed J1a, J2, J5, J5a, J6a & J7a
Board Combinations with ROM at Locations 5C (Games 14-28, Ver3) Installed J1b, J3, J5, J5b, J6b, J7b & J8 Removed J1a, J2, J4, J5a, J6a & J7a
* Version 1 has a 2K RAM which is a 24-pin IC in Position 5D; Versions 2 & 3 have a 8K RAM which is a 28-PIN IC in Position 5D.
*DPH0IJ'DWH0DQXDO3DUW
1XPEHU&38-XPSHU7DEOH
$SSHQGL[&
$33(1',;'
%RDUG7\SH7DEOH
*DPH 1DPH
)OLSSHU
6RXQG
initial:
520-5002-00
replaced with:
520-5002-02
2-Flipper
Laser War
Board Not Required
3RZHU 6XSSO\
'LVSOD\ ;'LJLW
520-5000-00
Master: 520-5004-00 plus:
520-5005-00 (Qty. 2): 7 Digit Alpha/Numeric
520-5006-00 (Qty. 2): 7 Digit Numeric
520-5007-00 (Qty. 1): 4 Digit Numeric
520-5002-01 was not used.
3-Flipper
Secret Service
Board Not Required
3-Flipper
Torpedo Alley
Board Not Required
2-Flipper
Time Machine
Board Not Required
Playboy 35th Anniversary
ABC Monday Night Football
Robocop
Phantom of the Opera
Back to the Future
The Simpsons
*DPH
1DPH
520-5033-00
2-Flipper (for 100 games)
520-5033-00
2-Flipper (for 100 games)
520-5033-00
2-Flipper
520-5033-00
2-Flipper
520-5033-00
2-Flipper
520-5033-00
2-Flipper
520-5002-02
520-5000-00
520-5002-02
520-5000-00
520-5002-02
520-5000-00
520-5002-02
520-5000-00
520-5002-02
520-5000-00
520-5002-02
520-5000-00
520-5002-02
520-5000-00
520-5002-02
520-5000-00
520-5002-03
520-5000-00
)OLSSHU
6RXQG
Checkpoint
520-5033-00
2-Flipper
3RZHU
6XSSO\
520-5002-03
520-5047-00
520-5042-00
128 X 16
Teenage
Mutant Ninja
Turtles
520-5033-00
2-Flipper
520-5002-03
520-5047-00
520-5042-00
128 X 16
520-5033-00
2-Flipper
520-5033-00
2-Flipper
520-5033-00
2-Flipper
520-5033-00
2-Flipper
520-5033-00
2-Flipper
520-5033-00
2-Flipper
520-5076-00
3-Flipper
520-5070-00
2-Flipper
520-5076-00
3-Flipper
520-5076-00
3-Flipper
'RW 0DWUL[
'LVSOD\
'LVSOD\
&RQWUROOHU
520-5014-01
7 Digit Alpha/Numeric Combined
520-5014-01
7 Digit Alpha/Numeric Combined
520-5014-01
7 Digit Alpha/Numeric Combined
520-5014-01
7 Digit Alpha/Numeric Combined
520-5030-00
16 Digit Alpha/Numeric Combined
520-5030-00
16 Digit Alpha/Numeric Combined
520-5030-00
16 Digit Alpha/Numeric Combined
520-5030-00
16 Digit Alpha/Numeric Combined
520-5030-00
16 Digit Alpha/Numeric Combined
2372
7UDQVPLWWHU
520-5042-00
128 X 16
520-5042-00
Star Trek 25th
520-5050-01
520-5047-00
Anniversary
128 X 16
520-5042-00
520-5050-01
520-5047-00
Hook
128 X 16
520-5052-00
Lethal
520-5055-00
520-5050-01
520-5047-01
Weapon 3
128 X 32
520-5052-00
Star
520-5050-02
520-5047-01
520-5055-00
Wars
128 X 32
520-5052-00
Rocky & Bull520-5050-02
520-5047-01
520-5055-00
winkle & Friends
128 X 32
520-5052-00
Jurassic Park
520-5050-02
520-5047-02
520-5055-00
128 X 32
520-5052-00
Last Action Hero
520-5050-03
520-5047-02
520-5055-00
128 X 32
520-5052-00
Tales from
520-5050-03
520-5047-02
520-5055-01
the Crypt
128 X 32
520-5052-00
The Who’s
520-5077-00
520-5047-02
520-5055-01
Tommy
128 X 32
520-5070 / 5080 -00
520-5052-00
WWF Royal
520-5077-00
520-5047-02
520-5055-01
Rumble
4-Flipper (2X2)
128 X 32
520-5076-00
520-5052-00
Guns N’
520-5077-00
520-5047-02
520-5055-01
Roses
3-Flipper
128 X 32
520-5076-00
520-5075-00
520-5102-00
520-5050-03
520-5047-03
520-5092-01
Maverick
3-Flipper
192 X 64
Single OPTO
520-5076-00
520-5075-00
Mary Shelley’s
520-5077-00
520-5047-03
520-5092-01
Frankenstein
3-Flipper
192 X 64
520-5070 / 5080 -00
520-5075-00
520-5124-00
520-5126-02
520-5047-03
520-5092-01
Baywatch
4-Flipper (2X2)
192 X 64
Single OPTO
520-5076-00
520-5075-00
520-5124-00
Batman
520-5126-02
520-5047-03
520-5092-01
Forever
3-Flipper
192 X 64
Single OPTO
Miscellaneous Boards (Lamp Boards & Relay Boards) not listed above can be found in each individual game manual.
Batman
520-5050-01
)OLSSHU
520-5080-00
2-Flipper
Apollo 13
Golden Eye
Miscellaneous
PC Boards:
520-5080-00
2-Flipper
Miscellaneous
PC Boards:
,2 3RZHU &386RXQG 'LVS 3RZHU 'RW 0DWUL[
'ULYHU
6WHUHR
6XSSO\
'LVSOD\
520-5052-00
128 X 32
Light Boards 520-5130-01, -04 & -05
Magnet Interface, 7-Segment Display & Light Bd. 520-5130-06
Magnet Driver Board 520-5130-02
Switch Membrane Board 520-5130-03
520-5052-00
520-5137-00
520-5136-00
520-5138-00
128 X 32
Light Boards
Mag. Processor X2 Driver Bd.
520-5128-05 through -08
520-5143-00
520-5137-00
2372
$SOOLFDWLRQ
520-5103-00
Single OPTO
Paddle Boat
Wheel Enter
520-5125-00
Single OPTO
520-5125-00
Single OPTO
5-Ball Trough
over Up-Kicker
4-Ball Trough
over Up-Kicker
520-5047-00
•
GAMES HEREON USE THE WHITE STAR BOARD SYSTEM (with the addition of the I/O Power Driver Board):
*DPH
1DPH
2372
5HFHLYHU
520-5136-00
520-5138-00
'LVSOD\
2372
&RQWUROOHU 7UDQVPLWWHU
520-5055-01
2372
5HFHLYHU
2372
$SOOLFDWLRQ
520-5124-00
Single OPTO
520-5125-00
Single OPTO
5-Ball Trough
over Up-Kicker
520-5124-00
Single OPTO
520-5125-00
Single OPTO
5-Ball Trough
over Up-Kicker
Relay Board
520-5010-00
520-5055-01
Relay Board
520-5010-00
Table continued on the next page.
$SSHQGL['
%RDUG
7\SH7DEOH
$33(1',;'
%RDUG7\SH7DEOH
•
GAMES HEREON USE THE WHITE STAR BOARD SYSTEM (with the deletion of the Flipper Board):
*DPH
1DPH
,2 3RZHU &386RXQG 'LVS 3RZHU 'RW 0DWUL[
'ULYHU
0RQR
6XSSO\
'LVSOD\
520-5137-01
Twister
Miscellaneous
PC Boards:
520-5136-10
Light Boards
520-5145-01 through -07
520-5137-01
Independence
Day (ID4)
Miscellaneous
PC Boards:
520-5136-10
520-5137-01
520-5136-10
Space Jam
The Star
Wars Trilolgy
- Special Ed.
The Lost
World: J.P.
Miscellaneous
PC Boards:
Starship
Troopers
Viper Night
Drivin’
Lost In
Space
Godzilla
Miscellaneous
PC Boards:
Relay Board
520-5010-00
520-5137-01
520-5136-10
HarleyDavidson®
Striker
Xtreme
(NFL)
Sharkey’s
Shootout
520-5055-01
520-5137-01
Miscellaneous
PC Boards:
520-5055-01
520-5055-01
Playboy
5-Ball Trough
over Up-Kicker
520-5124-00
520-5125-00
Single OPTO Single OPTO
520-5083-00
520-5082-00
Long Hop OPTO Long Hop OPTO
520-5124-00
520-5125-00
Single OPTO Single OPTO
4-Ball Trough
over Up-Kicker
Alien Head
Enter
5-Ball Trough
over Up-Kicker
520-5052-00
128 X 32
520-5055-01
520-5124-00
Single OPTO
520-5125-00
Single OPTO
4-Ball Trough
over Up-Kicker
520-5138-00
520-5052-00
128 X 32
520-5055-01
520-5124-00
Single OPTO
520-5125-00
Single OPTO
4-Ball Trough
over Up-Kicker
DC Relay Bd. Shaker Mtr. Bd.
520-5066-00
520-5065-00
520-5136-10
520-5138-00
520-5052-00
128 X 32
520-5055-01
520-5136-15
520-5138-00
520-5052-00
128 X 32
520-5055-02
520-5138-00
520-5052-00
128 X 32
520-5055-03
520-5138-00
520-5052-00
128 X 32
520-5055-03
520-5138-00
520-5052-00
128 X 32
520-5055-03
520-5138-00
520-5052-00
128 X 32
520-5055-03
520-5052-00
128 X 32
Shaker Mtr. Bd. Diode Board
/520-5065-00 520-5146-00
520-5052-00
520-5138-00
128 X 32
Relay Board
Diode Board
520-5010-00
520-5146-00
520-5052-00
520-5138-00
128 X 32
Sol. Exp. Bd.
520-5192-00
520-5052-00
520-5138-00
128 X 32
520-5055-03
4X 7-Segment Display Board
520-5166-00
520-5137-01
520-5136-16
Miscellaneous
PC Boards:
Relay Board
520-5010-00
520-5137-01
520-5136-16
Miscellaneous
PC Boards:
Relay Board
520-5010-00
520-5137-01
520-5136-16
520-5124-00
520-5125-00
Single OPTO Single OPTO
520-5082-00
520-5083-00
Long Hop OPTO Long Hop OPTO
520-5124-00
520-5125-00
Single OPTO Single OPTO
520-5082-00
520-5083-01
Long Hop OPTO Long Hop OPTO
520-5124-00
520-5125-00
Single OPTO Single OPTO
520-5082-00
520-5083-01
Long Hop OPTO Long Hop OPTO
520-5173-00
520-5174-00
Dual OPTO
Dual OPTO
520-5173-00
Dual OPTO
520-5174-00
Dual OPTO
520-5162-00
2-Pos. Motor
Sensor on
Snagger Motor
4-Ball Trough
520-5155-00
over Up-Kicker 3-Pos. Motor
Sensor on
File Cabinet
File Cab. Motor
Enter
4-Ball Trough
over Up-Kicker
L/R Orbit
Lane Enter
4-Ball Trough
over Up-Kicker
Jump Ramp
4-Ball Trough
over Up-Kicker
4-Ball Trough
over Up-Kicker
Miscellaneous Shaker Mtr. Bd.
PC Boards:
520-5065-00
520-5136-16
Miscellaneous
PC Boards:
520-5137-01
520-5136-16
Miscellaneous
PC Boards:
Relay Board
520-5010-00
520-5137-01
520-5136-16
Miscellaneous
PC Boards:
DC Relay Bd.
520-5066-00
520-5137-64
520-5136-64
Miscellaneous
PC Boards:
Relay Board
520-5010-00
520-5137-01
520-5136-16
520-5138-00
520-5055-03
for UK ONLY> Solenoid Expander Bd.
520-5192-00
520-5055-03
520-5055-03
for UK ONLY> Solenoid Expander Bd.
520-5192-00
Miscellaneous Dot Display (5X7) in Slot Mach.
PC Boards:
520-5197-00
Monopoly®
520-5125-00
Single OPTO
520-5138-00
High Roller
Casino
Austin
Powers•
520-5124-00
Single OPTO
2372
0LVF 2372
$SOOLFDWLRQ
$SS
Relay Board
520-5010-00
Miscellaneous
PC Boards:
520-5137-01
South Park
520-5138-00
520-5052-00
128 X 32
Mag. Drv. Bd.
520-5143-00
520-5052-00
128 X 32
Servo Mtr. Bd.
520-5152-00
520-5052-00
128 X 32
2372
5HFHLYHU
2X 7-Segment Display Board
520-5153-00
520-5136-10
520-5137-01
The X-Files
520-5138-00
Light Boards
520-5149-01 through -10
520-5137-01
Miscellaneous
PC Boards:
520-5138-00
'LVSOD\
2372
&RQWUROOHU 7UDQVPLWWHU
520-5137-01
520-5136-16
520-5138-00
520-5052-00
128 X 32
520-5136-16
Miscellaneous
PC Boards:
DC Relay Bd.
520-5066-00
520-5137-01
520-5136-16
Miscellaneous
PC Boards:
DC Relay Bd.
520-5066-00
520-5173-00
Dual OPTO
5-Ball Trough
over Up-Kicker
Kenny Under
Trough Enter
4-Ball Trough
over Up-Kicker
Motorcycle
Enter
4-Ball Trough
over Up-Kicker
Goalie UnderTrough Enter
4-Ball Trough
over Up-Kicker
520-5174-00
Dual OPTO
4-Ball Trough
over Up-Kicker
Ball Lock
520-5082-00
520-5083-01
Under
Long Hop OPTO Long Hop OPTO
Roulette
520-5196-00
520-5195-00
Up/Dn Ramp
3-Pos. OPTO 3-Pos. OPTO in Slot Mach.
520-5173-00
520-5174-00 4-Ball Trough
Dual OPTO
Dual OPTO over Up-Kicker
for UK ONLY> Solenoid Expander Bd.
520-5192-00
Miscellaneous Relay Bd. (X3)
PC Boards:
520-5010-00
520-5137-01
520-5055-03
520-5173-00
520-5174-00
Dual OPTO
Dual OPTO
520-5082-00
520-5083-01
Long Hop OPTO Long Hop OPTO
520-5173-00
520-5174-00
Dual OPTO
Dual OPTO
520-5082-00
520-5083-01
Long Hop OPTO Long Hop OPTO
520-5173-00
520-5174-00
Dual OPTO
Dual OPTO
520-5082-00
520-5083-01
Long Hop OPTO Long Hop OPTO
520-5173-00
520-5174-00
Dual OPTO
Dual OPTO
520-5052-00
128 X 32
Dot Display (5X7) in Elec. Sign
520-5197-00
520-5052-00
520-5138-00
128 X 32
Relay Bd.
520-5010-00
520-5138-00
520-5055-03
for UK ONLY> Solenoid Expander Bd.
520-5192-00
520-5055-03
520-5173-00
Dual OPTO
520-5218-00
4-Pos. OPTO
520-5173-00
Dual OPTO
520-5155-00
3-Pos. Motor
Sensor on
Goalie Motor
520-5194-00
4-Pos. Motor
Sensor on
?-Ball Motor
520-5194-00
4-Pos. Motor
Sensor on
Roulette
Wheel
Motor
520-5212-00
Pulse-Stretcher
OPTO on Spini-Me
520-5174-00 4-Ball Trough
Dual OPTO over Up-Kicker
520-5210-00
Bank
4-Pos. OPTO
Door
520-5174-00 4-Ball Trough
Dual OPTO over Up-Kicker
for UK ONLY> Solenoid Expander Bd.
520-5192-00
† N o t e : To order Game Specific CPU/Sound Board please specify Game Name.
%RDUG
7\SH7DEOH
$SSHQGL['
$33(1',;(
*HQHULF&RLO&URVV5HIHUHQFH*XLGH† ‡
67$1'$5' &2,/6
*$78516 5HV : 63, 3$57 1ž *$78516 5HV : 63, 3$57 1ž
*$8*(78516
090-5036-00T
20-400 1.0 : 090-5021-00
21-900 †
24-940 † 5.5 :
090-5036-00B 22-750/30-2600 ‡
22-500 1.7 : 090-5017-00
22-600 2.2 : 090-5023-00
25-1240 9.3 : 090-5034-00
22-900 †
090-5044-00T
23-700 3.1 : 090-5022-00
26-1200 † 10.3 :
22-1080 †
090-5044-00B
23-750 3.4 : 090-5019-00
090-5001-00T
27-1300 14.2 : 090-5003-00
23-620/30-2600 ‡
23-800 † 3.6 :
090-5001-00B 27-1400 14.7 : 090-5015-00
23-700/30-2600 ‡
090-5004-00T 23-800/30-2600 ‡
23-840 4.0 : 090-5005-00
27-1500 16.3 :
090-5004-00B
23-1200 7.1 : 090-5008-00
23-900
231e2-765 3.6 : 090-5037-03
28-1050 11.5 : 090-5046-00
23-1100
24-900 5.0 : 090-5002-00
29-2000 33.6 : 090-5016-00
23-1500
24-1570
NOTE: Ohm values may vary +/- .03 : depending on meter calibration.
25-1800
)/,33(5 &2,/6
5HV :
&2/25
63, 3$57 1ž
090-5020-10T
090-5011-00
2.6 / 92.0 :
3.4 :
090-5020-20T
090-5032-00T
4.3 : YEL/GRN
090-5032-00B
090-5006-00
2.4 / 75.0 : N/A
3.0 / 83.5 : N/A
090-5013-00
2.8 / 90.5 : N/A
090-5012-00
3.8 : GRN
090-5020-30
5.1 : ORG
090-5030-00
4.4 : BLU
090-5062-00T
9.5 : N/A
090-5025-00
13.8 : BLU/GRN 090-5041-00
† Coil Part Nºs ending with a "T" signifies the Diode is on the top of the lug; ...ending with a "B" signifies the Diode is on the bottom of the lug.
‡ These coils are dual-wound. Also Note: All Coil Part Nºs listed Do Not Include Coil Sleeves (must be ordered separately).
0$*1(7 &2,/6 Z OHDGV
not available
75,3 &2,/6 0LQLDWXUH
*$78516 5HV : 63, 3$57 1ž
22-650 4.3 : 090-5042-01
8 : 090-5061-00
24-780
20 -480 2.9 : 090-5064-02
*$78516 5HV : 63, 3$57 1ž
29-1000 15.2 : 090-5059-00
31-1500 52.0 : 090-5054-00
32-1800 50.2 : 090-5031-00
RED
N/A
YEL
*$78516 5HV : 63, 3$57 1ž
33-1590 59 : 515-6916-00
32-1250 35 : 515-6916-01
Note: 33-1590 WHT & 32-1250 YEL
/8*/(66 &2,/6
*$78516 5HV :
63, 3$57 1ž
23-800 :
090-5053-00
)OLSSHU&RLO7DEOH‡ ††
*$0( 1$0(
1ž RI
)OLSSHUV
Laser War ‡
Secret Service ‡
Torpedo Alley ‡
Time Machine ‡
/2:(5 )/,33(56
63, 1ž *$8*(78516 &RORU
/()7
5,*+7
090-5011-00
22-750 / 30-2600
090-5006-00
23-620 / 30-2600
090-5011-00
22-750 / 30-2600
090-5011-00
22-750 / 30-2600
833(5 )/,33(56
63, 1ž *$8*(78516 &RORU
/()7
5,*+7
SAME
Not Used
Not Used
SAME
Not Used
090-5013-00
23-700 / 30-2600
Not Used
090-5006-00
23-620 / 30-2600
090-5012-00
23-800 / 30-2600
SAME
Not Used
Not Used
‡ These coils are dual-wound.
090-5020-02
SAME
Not Used
Not Used
22-900 -YEL090-5020-02
ABC Monday Night Football ††
SAME
Not Used
Not Used
22-900 -YEL†† A very small % of these games used a 090-5020-20 coil which used a proto-type Solid State Flipper System. The two types of coils both
are 22-900 coils; the only difference being the addition of the 1N5404 Diode on the (-02) coils which was used in the Deger Design.
090-5020-20
Robocop
SAME
Not Used
Not Used
22-900 -YEL090-5020-20
Phantom of the Opera
SAME
Not Used
Not Used
22-900 -YEL090-5020-20
Back to the Future
SAME
Not Used
Not Used
22-900 -YEL090-5020-20
The Simpsons
SAME
Not Used
Not Used
22-900 -YEL090-5020-20
Checkpoint
SAME
Not Used
Not Used
22-900 -YEL090-5020-30
Teenage Mutant Ninja Turtles
SAME
Not Used
Not Used
23-900 -GRN090-5020-30
Batman
SAME
Not Used
Not Used
23-900 -GRN090-5020-30
SAME
Not Used
Not Used
Star Trek 25th Anniversary
23-900 -GRN090-5030-00
090-5020-30
Hook
Not Used
Not Used
23-1100 -ORG23-900 -GRN090-5030-00
Lethal Weapon 3
SAME
Not Used
Not Used
23-1100 -ORGPlayboy 35th Anniversary ††
Table continued on the next page.
$SSHQGL[(
*HQHULF&RLO&URVV5HIHUHQFH
*XLGH)OLSSHU&RLO7DEOH
$33(1',;(
)OLSSHU&RLO7DEOH†
*$0( 1$0(
1ž RI
)OLSSHUV
/2:(5 )/,33(56
63, 1ž *$8*(78516 &RORU
/()7
5,*+7
833(5 )/,33(56
63, 1ž *$8*(78516 &RORU
/()7
5,*+7
090-5032-00
SAME
Not Used
Not Used
22-1080 -YEL-GRN090-5020-30
Rocky & Bullwinkle & Friends
SAME
Not Used
Not Used
23-900 -GRN090-5030-00
090-5020-30
SAME
Not Used
Jurassic Park
23-1100 -ORG23-900 -GRN090-5020-30
Last Action Hero
SAME
Not Used
Not Used
23-900 -GRN090-5041-00
090-5032-00
Tales from the Crypt
SAME
Not Used
25-1800 -BLU-GRN22-1080 -YEL-GRN090-5041-00
090-5020-30
The Who’s Tommy
Not Used
SAME
25-1800 -BLU-GRN23-900 -GRN090-5032-00
090-5041-00
WWF Royal Rumble
SAME
SAME
22-1080 -YEL-GRN25-1800 -BLU-GRN090-5032-00
090-5030-00
Guns N’ Roses
SAME
Not Used
22-1080 -YEL-GRN23-1100 -ORG090-5032-00
090-5032-00
SAME
Not Used
Maverick
22-1080 -YEL-GRN22-1080 -YEL-GRN090-5030-00
090-5030-00
Mary Shelley’s Frankenstein
SAME
Not Used
23-1100 -ORG23-1100 -ORG090-5030-00
090-5020-30
090-5025-00
090-5030-00
Baywatch
23-1100 -ORG23-900 -GRN24-1570 -N/A23-1100 -ORG090-5020-30
090-5032-00
090-5020-20
Not Used
Batman Forever
23-900 -GRN22-1080 -YEL-GRN22-900 -YEL090-5032-00
Apollo 13
SAME
Not Used
Not Used
22-1080 -YEL-GRN090-5032-00
Golden Eye
SAME
Not Used
Not Used
22-1080 -YEL-GRN090-5020-20
090-5032-00
Twister
Not Used
Not Used
22-900 -YEL22-1080 -YEL-GRN090-5020-30
090-5032-00
ID4: Independence Day
SAME
Not Used
23-900 -GRN22-1080 -YEL-GRN090-5032-00T
090-5020-20T
Space Jam †
Not Used
Not Used
22-1080 -YEL-GRN22-900 -YEL090-5032-00T
The Star Wars Trilogy - Special Edition †
SAME
Not Used
Not Used
22-1080 -YEL-GRN090-5032-00T
The Lost World: Jurassic Park †
SAME
Not Used
Not Used
22-1080 -YEL-GRN090-5032-00T
The X-Files †
SAME
Not Used
Not Used
22-1080 -YEL-GRN090-5032-00T
090-5030-00T
Starship Troopers †
SAME
Not Used
22-1080 -YEL-GRN23-1100 -ORG090-5030-00T
Viper Night Drivin’ †
SAME
Not Used
Not Used
23-1100 -ORG090-5030-00T
090-5032-00T
Not Used
Not Used
Lost In Space †
23-1100 -ORG22-1080 -YEL-GRN090-5032-00T
Godzilla †
SAME
Not Used
Not Used
22-1080 -YEL-GRN090-5030-00T
South Park †
SAME
Not Used
Not Used
23-1100 -ORG090-5032-00T
090-5030-00T
Harley-Davidson® †
Not Used
Not Used
22-1080 -YEL-GRN23-1100 -ORG090-5032-00T
090-5030-00T
090-5030-00T
Striker Xtreme (NFL) †
Not Used
22-1080 -YEL-GRN23-1100 -ORG23-1100 -ORG090-5030-00T
090-5030-00T
090-5030-00T
Sharkey’s Shootout †
Not Used
23-1100 -ORG23-1100 -ORG23-1100 -ORG090-5020-20T
090-5032-00T
High Roller Casino †
Not Used
Not Used
22-900 -YEL23-1080 -YEL-GRN090-5020-30
090-5030-00T
Austin Powers• †
Not Used
Not Used
23-900 -GRN23-1100 -ORG090-5032-00T
090-5032-00T
090-5062-00T
Monopoly® †
Not Used
23-1500 -BLU22-1080 -YEL-GRN- 22-1080 -YEL-GRN090-5030-00T
090-5030-00T
Not Used
Not Used
Playboy †
23-1100 -ORG23-1100 -ORG† Coil Part Nºs ending with a "T" signifies the Diode is on the top of the lug (on the coil-winding side);
Coil Part Nºs ending with a "B" signifies the Diode is on the bottom of the lugs.
Star Wars
*HQHULF&RLO&URVV5HIHUHQFH
*XLGH)OLSSHU&RLO7DEOH
$SSHQGL[(
$33(1',;)
0RWRU6SHFLILFDWLRQ7DEOH
The following table only list games that used motors.
Part Numbers starting with "515-" will include the Wiring Harness & Connector.
*DPH 1DPH
)XQFWLRQ
ABC Monday Night Football
Goal Post
Up/Down Movement
Organ
Up/Down Movement
Mag Wheel
(in Backbox)
Phantom of the Opera
Checkpoint
6SHFLILFDWLRQV
3DUW 1ž
Motor 24v A.C.
60 RPM CW
Bowman Motor 24v
60Hz 3W 11 RPM CCW
515-5222-00
515-5256-00
Motor D.C. (KEN)
041-5005-00
Johnson Motor
(Vibrator)
Gear Motor 24v A.C.
325 RPM CW
Bowman Motor 24v
60Hz 3W 11 RPM CCW
Bowman Motor 24v
221e2 RPM
Gear Motor 24v A.C.
31e2 RPM
041-5002-00
Cooling Fan
(for Transporter F/X)
41e2" Motor 12v
041-5014-00
Spinning Light
21e2
Shaker
Teenage Mutant Ninja Turtles
Batman
Spinning Pizza Ball
Deflector
Bar Target
Up/Down Movement
Swinging Target
Star Trek 25th Anniversary
Lethal Weapon 3
Star Wars
Rocky & Bullwinkle & Friends
Jurassic Park
Transporter F/X
Bar Target
Up/Down Movement
R2D2 Robot
Left/Right Movement
Death Star
Rotation
Nell Log "Cutting Blade"
Forward/Back Movement
T-Rex
Left/Right Movement
T-Rex
Up/Down Movement
Shaker
Last Action Hero
Crane
Left/Right Movement
Shaker
Tales from the Crypt
Tombstone
Up/Down Movement
Shaker
Mirror
Up/Down Movement
The Who’s Tommy
Flipper Blinders
Spinning Airplane
Propellers
WWF Royal Rumble
Shaker
Maverick, The Movie
Turning Paddle Wheel
Mary Shelley’s Frankenstein
Batman Forever
Apollo 13
Creature Head
Left/Right Movement
Cannon
Left/Right Movement
Rocket
Up/Down Movement
Moon Unit
Rotational Orbit
Shaker
Golden Eye
Satellite
Left/Right Movement
515-5397-00
515-5256-00
515-5534-00
500-5421-00
v A.C.
Motor
4000 RPM CCW
Bowman Motor 24v
60hz 3W 11 RPM CCW
Bowman Motor 24v A.C.
221e2 RPM CW
Bowman "G" Motor 24v A.C.
60Hz 6 RPM CW
Autotrol Model E Motor 24v
60hz 4W 3 RPM CCW
Multi Motor 5v D.C.
041-5017-00
Bowman Motor 24v
11 RPM CW
Johnson Motor
(Vibrator)
Multi Products Motor 12v D.C.
#3312 OSC
Johnson Motor (Vibrator) 10.5v D.C.
10 AMP 2950 RPM CW
Bowman Motor 24v A.C.
6 RPM CCW
Johnson Motor (Vibrator) 10.5v D.C.
10 AMP 2950 RPM CW
Bowman Motor 24v A.C.
6 RPM CCW
Servo Motor
(94102)
041-5026-00
515-5256-00
515-5571-00
515-5570-00
041-5023-00
041-5025-00
041-5002-00
041-5027-00
041-5029-00
515-5900-00
041-5029-00
515-5900-00
041-5032-00
Motor D.C.
041-5033-00
Johnson Motor (Vibrator) 10.5v D.C.
10 AMP 2950 RPM CW
Motor 24v A.C.
10 RPM
041-5029-00
Servo Motor (94102)
041-5032-00
Bowman Motor 24v A.C.
60Hz 3W 6 RPM CCW
Bowman Motor 24v A.C.
60Hz 3W 6 RPM CCW
Multi Products Motor 24v A.C.
50/60Hz 3W 6 RPM CCW
Johnson Motor (Vibrator) 10.5v D.C.
10 AMP 2950 RPM CW
Bowman Motor 24v A.C.
60Hz 3W 6 RPM CW
515-6383-00
041-5036-00
515-6383-00
515-6487-00
041-5029-00
515-6528-00
Table continued on the next page.
$SSHQGL[)
0RWRU6SHFLILFDWLRQ
7DEOH
$33(1',;)
0RWRU6SHFLILFDWLRQ7DEOH
The following table only list games that used motors.
*DPH 1DPH
Twister
ID4: Independence Day
The Star Wars Trilogy - S.E.
The Lost World: J.P.
The X-Files
Starship Troopers
Lost In Space
Godzilla
Harley-Davidson®
Striker Xtreme (NFL)
Sharkey’s Shootout
High Roller Casino
Austin Powers
Monopoly®
Playboy
)XQFWLRQ
Part Numbers starting with "515-" will include the Wiring Harness & Connector.
Spinning Disc
with Magnet
Backbox Fan
(Tornado Wind)
Alien Head
Open/Close Movement
X-Wing
Left/Right Movement
Snagger & Center Link
Lift Up/Down Movement
6SHFLILFDWLRQV
Multi Products Motor 24v A.C. (041-5026-00)
50/60Hz 3W 325 RPM CCW
Multi Products Motor 24v A.C. (041-5052-00)
50/60Hz 3W 3600 RPM CW
Servo Motor
(94322)
Bowman Motor 24v A.C. (041-5058-00)
60Hz 3W 10 RPM CCW
Multi Products Motor 20v D.C. (041-5059-03)
9 RPM Non-Directional
Johnson
Motor (Vibrator) 10.5v D.C.
Shaker
10 AMP 2950 RPM CW
X-File Cabinet
Multi Products Motor 20v D.C.
Lift Up/Down Movement
9 RPM CCW
Haydon Switch & Instrument, Inc. Stepper Motor
Warrior Bug
12v D.C. 4.6W (041-5062-00), Series 36000:
Forward/Reverse Movement 1.4"ø (Non-Captive Shaft not incl.) HSI #36864-12
(Unipolar) Travel per Step: .004 Step Angle: 15°
Spinning Disc
Multi Products Motor 24v A.C. (041-5046-00)
with Magnet
50/60Hz 3W 325 RPM CCW
Johnson Motor (Vibrator) 10.5v D.C.
Shaker
10 AMP 2950 RPM CW ‡
Johnson Motor (Vibrator) 10.5v D.C.
Shaker
10 AMP 2950 RPM CW ‡
Motorcycle
Autotrol 24v A.C. (041-5072-01)
Lift Up/Down Movement
20 RPM CCW
Goalie (Linebacker)
Multi #3590 12v D.C. (041-5075-00)
Left to Right Movement
60 RPM
Mystery Ball
Hankscraft Motor Model-E 24v A.C. (041-5076-00)
Rotating Movement
50/60Hz 3W 20 RPM CW
Roulette Wheel
Multi Products Motor 20V D.C. (041-5078-00)
Rotating Movement
17 RPM CCW
Haydon Switch & Instrument, Inc. Stepper Motor
Up/Dn. Ramp in Slot Mach.
12v D.C. 4.6W (041-5062-00), Series 36000:
Lift Up/Down Movement
1.4"ø (Non-Captive Shaft not incl.) HSI #36864-12
(Unipolar) Travel per Step: .004 Step Angle: 15°
Time Machine
Multi Products Motor 24v A.C. (041-5079-00)
Rotating Movement
50/60Hz 20RPM CCW
Laser Beam
Autotrol Motor 24V A.C. (041-5081-00)
Left to Right Directional
50/60Hz 4W 10RPM Bi-Directional
Dr. Evil Target
Hankscraft Motor Model-E 24v A.C. (041-5030-00)
Lift Up/Down Movement
50/60Hz 6RPM CCW
Mini-Flipper (Waterworks)
Multi Prod. Motor & Gear Box #7000 EX00159A
Rotating Movement
20v D.C. 50/60Hz 85RPM CC/CCW
Triangular Billboard
Autotrol Motor (BD511 150-1387) 24v A.C.
Rotating Movement
50/60Hz 12RPM Bi-Directional
Centerfold Mechanism
Multi Products (3680) Motor 12v DC
Open/Close Movement
10/12 RPM CC/CCW
Haydon Switch & Instrument, Inc. Stepper Motor
Tease Drop Screen
12v D.C. 4.6W (041-5062-00), Series 36000:
Lift Up/Down Movement
1.4"ø (Non-Captive Shaft not incl.) HSI #36864-12
(Unipolar) Travel per Step: .004 Step Angle: 15°
3DUW 1ž
515-6347-00
515-6531-00
041-5045-00
515-6383-01
515-6715-03
041-5029-00
041-5057-00
515-6794-00
Requires 7" Shaft:
530-5503-00
515-6347-00
041-5029-01
041-5029-01
515-7025-00
515-7071-00
515-7095-00
515-7153-00
515-6794-00
":
Requires Shaft 4
530-5503-01
515-7141-00
515-7171-00
515-5900-00
041-5083-00
041-5086-02
041-5075-04
515-6794-00
Requires 7" Shaft:
530-5503-00
No motors were used on the following games: Laser War, Secret Service, Torpedo Alley, Time Machine,
Playboy 35th Anniversary, Robocop, Back to the Future, The Simpsons, Hook, Guns N’ Roses, Baywatch,
Space Jam, Viper Night Drivin’, South Park.
‡ Please Note: "-01" Shaker Motor is Not Compatible with old Shaker Motor 041-5029-00 (Shaker Motor Assy.
515-5893-00). THIS NEW MOTOR CAN ONLY BE USED IN NEW SHAKER MOTOR ASSY. 515-5893-01.
0RWRU6SHFLILFDWLRQ
7DEOH
$SSHQGL[)
$33(1',;*
3DUW1XPEHU3UHIL[&ODVVLILFDWLRQ&RGHV
I.
Electrical Source, Energy & Signal Converters
010- Transformers
031- Speakers
090- Solenoids (Coils)
II.
Conductors, Connectors & Insulators
034- Line Cords
036- Cable and Harness Assemblies
041- Motors
045- Connectors (All Types)
077- Lamp Sockets
III.
Circuits & Circuit Elements
100- ICs
110- Transistors
112- Diodes
121- Resistors
123- Resistors (Variable & Adjustable)
124- Regulators & Bridge Rectifiers
125- CAPS
140- Crystals
165- Light Bulbs
180- Switches
190- Relays
IV.
Bolts, Screws, Nuts & Washers
231- Bolts
232- Screws (Pan Head)
234- Screws (HWH)
237- Screws (Misc.)
240- Nuts (Misc.)
242- Washers (Flat, Round)
244- Washers (Split Lock)
246- Washers (Lockers, External Tooth)
V.
Mechanical Components
249- Rivets
251- Pins (Dowel)
254- Stand-Offs, Spacers and Shims
260- Steel Ball
265- Springs (Extension)
266- Springs (Compression)
269- Springs (Washers - Belleville, Wave)
280- Grommets and Bushing
VI.
Handles, Locks, Catches & Latches, Keys & Hinges
355- Handles, Locks, Catches & Latches and Keys
390- Hinges
VII.
Fabricated Parts (In-House Assemblies)
500- End Product (Systems and Models)
515- Sub-Assemblies
520- Printed Circuit Boards (PCBs)
522- Display Glass
525- Wood Parts
530- Screw Machined Parts
535- Fabricated Parts
545- Molded (Extruded) Plastic/Rubber Parts
550- Molded (Inserts)
VIII. Bulk Materials
600- Braided Ground Wire
601- Stranded Wire
602- Ribbon Cable
605- Sleeving (Shrink Tubing)
626- Foam Rubber
IX.
$SSHQGL[*
Miscellaneous
705- Packing & Shipping Items
820- Decals and Labels (Sets & Misc.)
830- Butyrate (Plastic Pieces)
900- Game Posters
960- EPROM (Raw Part)
965- EPROM (Programmed Part)
3DUW1XPEHU
3UHIL[&ODVVLILFDWLRQ&RGHV
$33(1',;+
3OD\ILHOG,QVHUWV3ODVWLF/LJKW&RYHUV
Patterns:
STARBURST
STARBURST
CIRCULAR
5e8"
STIPPLE
STARBURST
CIRCULAR
3e4"
ø
ø
550-5001-XX
PLAIN
CIRCULAR
STARBURST
CIRCULAR
STARBURST
CIRCULAR
STARBURST
CIRCULAR
1" ø
1-3/16" ø
1-1e2" ø
550-5002-XX
PLAIN
CIRCULAR
550-5003-XX
PLAIN
CIRCULAR
550-5004-XX
PLAIN
CIRCULAR
1" ø
1-3/16" ø
1-1e2" ø
550-5009-XX
ROLLOVER
BUTTON BASE
550-5010-XX
WHITE STAR
(only in white)
STARBURST
CIRCULAR
550-5000-XX
STARBURST
CIRCULAR
2-1e4" ø
2-3e4" ø
550-5005-XX
PLAIN
CIRCULAR
550-5006-XX
PLAIN
CIRCULAR
550-5007-XX
STIPPLE
CIRCULAR
550-5008-XX
STIPPLE
1" SQUARE
2-1e4" ø
2-3e4" ø
1" ø
12"
3e4"
ø
550-5019-XX
550-5026-XX
550-5048-XX
545-5015-00
550-5011-XX
550-5012-XX
STIPPLE
STIPPLE
STARBURST
PLAIN
PLAIN
PLAIN
RECTANGULAR RECTANGULAR RECTANGULAR RECTANGULAR RECTANGULAR RECTANGULAR
1-1e2" X 3e4"
1-5e8" X 1-1e2"
2-1e4" X 1-1e8"
2-1e4" X 1-1e8"
1-1e4" X 1-1e2"
2" X 2-1e2"
550-5018-XX
STARBURST
MINI SHIELD
550-5051-XX
STARBURST
LARGE SHIELD
550-5044-XX
MINI
HOT DOG
550-5049-XX
BEVEL
HOT DOG
550-5050-XX
PLAIN
HOT DOG
550-5063-XX
BANANA
1-5/8"
3-1e2"
3-1e2"
550-5020-XX
STARBURST
ARROW-HEAD
SMALL
550-5021-XX
STARBURST
ARROW-HEAD
LARGE
550-5022-XX
STARBURST
BULLET
550-5023-XX
STARBURST
TRIANGLE
550-5014-XX
550-5015-XX
550-5016-XX
550-5017-XX
1" X 1"
550-5024-XX
550-5025-XX
STARBURST
STARBURST
ARROW-SMALL ARROW-LARGE
550-5013-XX
550-5070-XX
Note: The shapes and sizes shown above are not to scale. Some shapes may no longer be available in every color.
Instructions:
1º
&RORU
Parts which may come in various colors (i.e. targets, some posts, playfield inserts, etc.) end in a 2-digit Nº which correspond
to the color of that part. The "-XX" in Part Nºs which may come in various colors should be replaced with the desired 2-Digit
Nº. corresponding to the color desired. Not all colors may be available.
1º
&RORU
-00 Black or Solid Clear -03 Amber
-01 Clear
-04 Green
-02 Red
-05 Blue
3OD\ILHOG,QVHUWV
3ODVWLF/LJKW&RYHUV
1º
3/$67,& 3$57 &2/25 &+$57
&RORU
-06 Yellow
-07 Orange
-08 White
1º
&RORU
-09 Purple
-10 Fluor. Orange
-11 Fluor. Green
1º
&RORU
-12 Fluor. Blue
-13 Teal Green
-14 Gray
1º
&RORU
-15 Luminescent
-16 Gold
-17 Trans. Brown
$SSHQGL[+
$33(1',;,
6WDQG8S7DUJHWV
"R" means
«Target
Insert» is
reversed,
allowing
for Rear
Mounted
application.
5
7DNH1RWH
1.
2.
For Items A-E, for the Target Assembly use the "500-" SPI Nº;
For the Target Assy. with Rear Mount add "R" to "500-" SPI Nº;
For just the «Target Insert» use the "545-" SPI Nº.
Items A-E come in various colors. These targets may not be
available in every color. The "-XX" in should be replaced with the
desired 2-Digit Nº for the color desired described in the Chart .
As of date of print, the following colors were used for Items A-E:
Ç
-01 Clear (A, D); -02 Red (A, B, C, D, E); -03 Amber (D, E); -04 Green (A, B);
-05 Blue (C); -06 Yellow (A, C), -09 Purple (B, D); -11 Fluorescent Green (A, B, D).
3.
See Section 3, Chapter 2, Go To Diagnostics Menu, for switches used
corresponding to the Switch Matrix Grid of this game.
1º 67$1'83 7$5*(7 1$0(
A
B
C
Modular Stand-Up Target Narrow Assy.
Stand-Up Target Narrow (Insert)
Modular Stand-Up Target Square Assy.
Stand-Up Target Square (Insert)
Modular Stand-Up Target Rectangle Assy.
Stand-Up Target Rectangle (Insert)
)
$
&RORU
Black
Clear
Red
Amber
Green
Blue
Yellow
Orange
White
Purple
Fluor. Orange
Fluor. Green
Fluor. Blue
Teal Green
Gray
Luminescent
Gold
63, 3$57 1º 1º 67$1'83 7$5*(7 1$0(
63, 3$57 1º
Modular Stand-Up Target Round Assy.
500-6138-XX
500-6075-XX
D Stand-Up Target Round (Insert)
545-6138-XX
545-6075-XX
Mod. Stand-Up Target 1" Spherical Assy.
500-6139-XX
500-6189-XX
E Stand-Up Target 1" Spherical (Insert)
545-6139-XX
545-6189-XX
500-6228-XX Note: To receive the Target Assembly with the « Target Insert »
« Reversed » simply add a "R" at the end of the Part Nº. See Side
545-6228-XX View picture above to compare (dashed line shows target reversed).
&
%
'
1º
-00
-01
-02
-03
-04
-05
-06
-07
-08
-09
-10
-11
-12
-13
-14
-15
-16
3/$67,& 3$57
&2/25 &+$57
7DNH1RWH
(
1.
2.
3.
1º 67$1'83 )/$7 7$5*(7 1$0(
63, 3$57 1º
For Items 1-4, "single" components can be ordered.
Items 1-4 come in various colors. These targets may not be
available in every color. The "-XX" in Part Nºs should be
replaced with the desired 2-Digit Nº for the color desired
described in the above Chart.
For switches used corresponding to the Switch Matrix
Grid of this game, see Sec. 3, Chp. 2, ...Diagnostics.
1º 67$1'83 )/$7 7$5*(7 1$0(
63, 3$57 1º
Note: Item 2A, is a riveted Sub-Assy. which includes the following items for reference:
1" Round Stand-Up Target Assy.
500-5835-XX ‡A1—
Stack Switch Radius End (180-5133-00), A2— Washer 5/16" (242-5017-00),
A3— Rivet 1/8" ø X 3/16" (249-5001-00) and A4— Rectangular Target (545-5145-XX).
ORDERING ABOVE (ITEM 1) ASSY. PART Nº WILL INCLUDE:
1A‡ Switch & Target Assy. 1" Round
515-5966-XX
3 1" Sq. Stand-Up Target Assy.
500-5232-XX
1B
Mounting Bracket
535-6896-00
ORDERING ABOVE (ITEM 3) ASSY. PART Nº WILL INCLUDE:
1C
Switch Back Plate
535-6452-00
3A‡ Sw. & Target Assy. 1" Square
515-5162-XX
1D
237-5976-05
6-32 X 3e4 HWH Swage (Qty. 2)
Items 3B-F are identical to 1B-F
Same as 1B-F
1E
112-5001-00
Switch Diode, 1N4001
‡ Note: Item 3A, is a riveted Sub-Assy. which includes the following items for reference:
1F
626-5029-00
Foam Pad
Stack Switch Radius End (180-5133-00),
Washer 5/16" (242-5017-00),
1
‡ Note: Item 1A, is a riveted Sub-Assy. which includes the following items for reference:
A1— Stack Switch Radius End (180-5133-00), A2— Washer 5/16" (242-5017-00),
A3— Rivet 1/8" ø X 3/16" (249-5001-00) and A4— 1" Round Target (545-5456-XX).
A1—
A2—
A3— Rivet 1/8" ø X 3/16" (249-5001-00) and A4— 1" Square Target (545-5470-XX).
4 Narrow Stand-Up Target Assy.
500-5857-XX
1" X 11e2" Stand-Up Rect. Target Assy.
500-5321-XX ORDERING ABOVE (ITEM 4) ASSY. PART Nº WILL INCLUDE:
4A‡ Sw. & Target Assy. Narrow
515-5967-XX
ORDERING ABOVE (ITEM 2) ASSY. PART Nº WILL INCLUDE:
Items 4B-F are identical to 1B-F
Same as 1B-F
2A‡ Sw. & Target Assy. 1" X 11e2" Rect.
515-6027-XX
‡ Note: Item 4A, is a riveted Sub-Assy. which includes the following items for reference:
Items 2B-F are identical to 1B-F
Same as 1B-F
A1— Stack Switch Square End (180-5132-00),
Item 2 Table Note continued in
A2— Washer 5/16" (242-5017-00),
the next column.
A3— Rivet 1/8" ø X 3/16" (249-5001-00) and
2
$SSHQGL[,
A4— Narrow Target (545-5210-XX).
6WDQG8S
7DUJHWV
$33(1',;&RLQ&DUGV86$,QWHUQDWLRQDO
Pricing Default:
(note):
USA 8 or Canada
(used prior 03/2002)
USA 2-7 or Canada USA or International USA 1* (optional)
(used prior 03/2002)
(used prior Mar. 02)
(used prior Mar. 02)
USA 5
(used prior Mar. 02)
See Section 3, Chapter 4,
Go To Adjustments Menu,
Adj. 6, Game Pricing, USA &
International Standard
Pricing Select Table, to view
Custom or Standard Pricing
Schemes these Coin Cards
correspond to.
Description:
SPI Part N°:
USA 8 or Canada
Front
755-5087-01
USA 5 or Canada
for Custom Pricing
Back
1-Sided
1-Sided
755-5087-02
755-5087-01
755-5087-03
755-5087-05
USA 1* (optional) Custom Pricing† USA 2-7 or Canada Custom Pricing†
(supercedes 755-5087-01) (supercedes 755-5087-05) (supercedes 755-5087-03) (supercedes 755-5087-02) (supercedes 755-5087-01) (supercedes 755-5087-02)
Front
755-5400-00
EURO 1
Back
755-5400-00
EURO 2
Front
755-5400-01
EURO 3
Back
755-5400-01
EURO 4
Front
755-5400-02
EURO 5
Back
755-5400-02
EURO 6
1-Sided
755-5401-01
EURO 7
1-Sided
755-5401-02
EURO 8
1-Sided
755-5401-03
EURO 9
1-Sided
755-5401-04
EURO 10
1-Sided
755-5401-05
EURO 11
1-Sided
755-5401-06
EURO 12
1-Sided
755-5401-07
1-Sided
755-5401-08
1-Sided
755-5401-09
DENMARK 1
1-Sided
755-5401-10
DENMARK 2
1-Sided
755-5401-11
JAPAN
1-Sided
755-5401-12
JAPAN Custom
Front
755-5402-00
SWEDEN 1
Back
755-5402-00
SWEDEN 2
Front
755-5404-00
UK 1
Back
755-5404-00
UK 3
Front
755-5405-00
UK 5
Back
755-5405-00
UK Custom
Front
755-5407-00
Back
755-5407-00
Front
755-5407-01
Back
755-5407-01
Note: You can download any Coin Card (in PDF Format**) from our website www.sternpinball.com/
coinagecards.htm. Only the Coin Cards shown on this
page are available. Older styles (foreign or domestic), if
no longer available through your distributor, cannot be
replaced.
** Requires Adobe®Reader 5.0 available for free download through our website www.sternpinball.com/
techsupport.htm. Printing Suggestions: Print on highgloss paper with a color printer (the highest dpi possible)
for best results. Check print preview to ensure page is
not fit to size (print actual size). Finished Cards should
be 51/2" x 215/16". Trim off borders. For double-sided
cards, print both separately, as aligning may be difficult.
NORWAY 1
NORWAY 2
Front
Back
755-5403-00
755-5403-00
AUSTRALIA 1
AUSTRALIA 2
NEW ZEALAND 2 NEW ZEALAND 1
Front
755-5406-00
Back
755-5406-00
† International can use the back side of this card for Custom Pricing.
&RLQ&DUGV
86$,QWHUQDWLRQDO
Front
Back
755-5408-00
755-5408-00
SWITZERLAND 1 SWITZERLAND 2
* Optional Card not included with this game, but available.
$SSHQGL[-
3DUWV2UGHU&KHFNOLVW1RWHV
'DWH 2UGHUHG
3
3DUW 1º
4W\
'HVFULSWLRQ
'DWH 5HFHLYHG
3DUWV2UGHU
&KHFNOLVW1RWHV
*/266$5<2)7(506
A Followed after a number means "Amp." or Ampage in an expression relating to an electrical object. (e.g. 8A).
AC (Acronym) Alternating Current.
Adj. (Abbreviation) Adjustment(s).
Assy. (Abbreviation) Assembly.
Au. (Abbreviation) Audit(s).
Bd. (Abbreviation) Board.
BOT (Abbreviation) Bottom.
Brkt. (Abbreviation) Bracket.
Bridge Rectifier A configuration of a diode that allows current to
flow in one direction producing both positive and negative pulsating DC Voltages.
Color Coding See Appendix H or I, Plastic Part Color Chart or Section 4, Chapter 1, Playfield - Plastic Posts & Spacers.
Combination (Combo) [Shot] Any variable pinball shot(s) made
successively.
Conn. (Abbreviation) Connector.
CMOS Short for COSMOS (Complementary Symmetry M.O.S.);
Complementary Metal-Oxide Semi-Conductor.
CN (Abbreviation) Connector (e.g. CN5-P3).
CT (Abbreviation) Center.
DC (Abbreviation) Direct Current.
DT (Abbreviation) Drop Target(s).
DOTS (Acronym) Diode On Terminal Strip.
EB (Abbreviation) Extra Ball.
Eject Playfield surface device to kick ball back into play; Saucer.
EPROM (Acronym) Erasable Programmable Read Only Memory.
Can be erased using UV Light and re-programmed.
e.g. (Abbreviation) Latin- Exempli gratia. For Example.
EOS (Acronym) End-Of-Stroke (i.e. Switch for flipper).
F (Abbreviation) Fuse (i.e. F23).
GA-Turn Gauge & Turn describing the windings on a coil (e.g. 23800, 23 is the gauge of wire and 800 is the amount of windings.
G.I. (Abbreviation) General Illumination (Lamps).
HWH (Abbreviation) Hex Washer Head.
IC (Acronym) Integrated Circuit (As in after 24-Pin IC).
ID or I.D. (Acronym) Inside Dimension.
i.e. (Abbreviation) Latin- Id est. That is.
IO or I/O (Abbreviation) Input / Output (e.g. I/O Power Driver Bd.)
LT, Lt. or L. (Abbreviation) Left.
Laser Kick A coil/plunger used above the playfield to kick pinball
back into play.
LED (Acronym) Light Emitting Diode.
Loop [Shot] Continuously up a ramp and back to the flipper.
Lwr. (Abbreviation) Lower.
Orbit [Shot] From the left or right flipper around the back rail of the
playfield back to the flipper.
MB (Abbreviation) Magnet Board.
M-BALL or MBALL (Abbreviation) Multiball• More than 1 ball in
game play.
MID (Abbreviation) Middle
Non-Reflexive See Reflexive.
No. or Nº or # (Abbreviation) Number
NPF (Acronym) No Problem Found.
N.C. or NC (Abbreviation) Normally Closed.
N.O. or NO (Abbreviation) Normally Open.
NS (Abbreviation) Not Stuffed. (Use in Part Listings, Sec. 5)
OD or O.D. (Abbreviation) Outside Dimension.
P (Abbreviation) Pin (e.g. CN5-P3).
PCB (Acronym) Printed Circuit Board
*ORVVDU\
RI7HUPV
P/F (Abbreviation) Playfield.
PIA LED (Acronym) Peripheral Interface Adapter Light Emitting Diode.. This is a diagnostic LED on the CPU; it should not be lit
during normal operation of a pinball game.
Plumb Bob Tilt Weight on Tilt Assembly.
PPH (Abbreviation) Phillips Pan Head.
Pop(s) Another term for Turbo Bumper(s).
PPB (Acronym) Playfield Power Board ("Popcorn-Popping Bd.").
PREV (Abbreviation) Previous.
PSB (Abbreviation) Power Supply Board
RAM (Acronym) Random Access Memory. RAM can store input instructions and supply output information.
Reflexive/Non-Reflexive Reflexive—Solenoid Drive Transistor is
enabled directly by a switch closure on the (Relating to CPU
Boards) solenoid assembly (Ver. 1/2).
Non-Reflexive—Solenoid Drive Transistor is enabled by the
CPU after reading a switch closure in the Switch Matrix (Ver.
3). Also note: All CPU Boards are backwards compatible (e.g.
Jurassic Park/Ver. 3 to Time Machine/ Ver. 2). Swapping a
Ver. 2 Board to a Ver. 3 is not possible due to the special solenoids section (i.e. Slingshots, Turbo Bumpers, etc.) changing
from REFLEXIVE to NON-REFLEXIVE on Ver. 3 Boards.
Relay An automatic switch operated by current in a coil.
ROM (Acronym) Read Only Memory. ROM cannot store input instructions but can supply output information. ROM can be programmed only once.
RMA (Abbreviation) Return Merchandise Authorization Number
RT, Rt. or R. (Abbreviation) Right; ("R" at the end of Target Assy.
Part Nº signifies Target Insert is Reversed.)
RO (Abbreviation) Rollover (switches).
Saucer See Eject.
Scoop A hole into the playfield. A metal scoop is in place to guide
the ball into the kick-back under the playfield.
Slam Tilt A switch which closes when the game is slammed into or
the Coin Door is slammed shut. Depending on adjustable settings, will cancel game in play when the number of closures required is achieved.
SMB (Abbreviation) Shaker Motor Board.
Solenoid A coil used for Electro Magnetic devices such as relays,
flippers, slingshots, etc.
SSFB (Abbreviation) Solid State Flipper Board.
STEP Refers to the service switches on the coin door.
Sub-Assy. (Abbreviation) Sub-Assembly.
S-U or S/U (Abbreviation) Stand-Up ( targets).
TM (Abbreviation) Trademark
Transfer [Shot] Maneuvering the ball in play from one flipper to the
other. With flipper in the up position and the ball cradled by that
flipper one would activate the flipper button in a quick repetitive
manner to bounce the ball to the other side. Skilled players
can rebound the ball off the slingshot.
Tri-Ball Three balls in play.
TTL (Abbreviation) Transistor-Transistor Logic
Upr. (Abbreviation) Upper.
V or v (Abbreviation) Volt(s).
Ver. (Abbreviation) Version.
VUK (Acronym) Vertical Up-Kicker (Super or Standard).
X (Abbreviation) "Times" A multiplier; also used in dimensions.
X-Ball An undetermined number of ball(s) during game play.
Zener Diode A semi-conductor diode used for voltage regulation.
Application depends on reverse break-down voltage.
"-00B" "B" at the end of Coil Part Numbers signifies that the diode
is attached to the bottom of the lug.
"-00T" "T" at the end of Coil Part Numbers signifies that the diode
is attached to the top of the lug (the side nearest the coil-winding).
*ORVVDU\
RI7HUPV
6 7 ( 5 1 • 3 , 1 % $ / / , 1 & / , 0 , 7 ( ' : $ 5 5 $ 1 7 <
67(51 3,1%$// ,1& 6(//(5 :$55$176 21/< 72 7+( ,1,7,$/ 385&+$6(5 2) ,76 352'8&76 7+$7 7+( ,7(06
/,67(' %(/2:
81'(5 1250$/ 86( $1' 6(59,&(
: $ 5$5(
5 $)5((
1 7 )520
< 3 ('()(&76
5 , 2 ',1 0$7(5,$/
6 3 ( & ,$1'
) , :25.0$16+,3
('
)25 7+(
35,17(' &,5&8,7 %2$5'6 *$0( /2*,&
'27 0$75,; ',63/$< %2$5'6
0217+6
0217+6
12 27+(5 3$576 2) 6(//(5·6 352'8&7 $5( :$55$17('
:$55$17< 3(5,2'6 $5( ())(&7,9( )520 7+( ,1,7,$/ '$7( 2) 6+,30(17 )520 6(//(5 72 ,76 $87+25,=('
',675,%87256
6(//(5·6 62/( /,$%,/,7< 6+$// %( $7 ,76 237,21 72 5(3$,5 25 5(3/$&( 352'8&76 :+,&+ $5( 5(7851(' 72
6(//(5 '85,1* 7+( :$55$17< 3(5,2'6 63(&,),(' 3529,'('
6(//(5 ,6 127,),(' 352037/< 8321 ',6&29(5< %< 385&+$6(5 7+$7 67$7(' 352'8&76 $5( '()(&7,9(
68&+ 352'8&76 $5( 3523(5/< 3$&.$*(' $1' 7+(1 5(7851(' )5(,*+7 35(3$,' 72 6(//(5·6 3/$17
7+,6 :$55$17< '2(6 127 $33/< 72 $1< 3$576 '$0$*(' '85,1* 6+,30(17 $1'25 '8( 72 ,03523(5
+$1'/,1* 25 '8( 72 ,03523(5 ,167$//$7,21 25 86$*( 25 $/7(5$7,21 ,1 12 (9(17 6+$// 7+( 6(//(5 %(
/,$%/( )25 $1< $17,&,3$7(' 352),76 /266 2) 352),76 /266 2) 86( $&&,'(17$/ 25 &216(48(17,$/
'$0$*(6 25 $1< 27+(5 /266(6 ,1&855(' %< 7+( &86720(5 ,1 &211(&7,21 :,7+ 7+( 385&+$6( 2) $
67(51 3,1%$// ,1& 352'8&7
:$55$17< ',6&/$,0(5
(;&(37 $6 63(&,),&$//< 3529,'(' ,1 $ :5,77(1 &2175$&7 %(7:((1 6(//(5 $1' 385&+$6(5 7+(5( $5( 12
27+(5 :$55$17,(6 (;35(66 25 ,03/,(' ,1&/8',1* $1< ,03/,(' :$55$17,(6 2) 0(5&+$17$%,/,7< 25
),71(66 )25 $ 3$57,&8/$5 385326(
& $ 8 7 , 2 1 6 : $ 5 1 , 1 * 6 1 2 7 , & ( 6
&DXWLRQ
)25 6$)(7< $1' 5(/,$%,/,7< 68%67,787( 3$576 $1' (48,30(17 02',),&$7,216 $5( 127 5(&200(1'('
$1' 0$< 92,' $1< :$55$17,(6 86( 2) 12167(51 3,1%$// ,1& 3$576 25 02',),&$7,216 2) *$0(
&,5&8,75< 0$< $'9(56(/< $))(&7 *$0( 3/$< 25 0$< &$86( ,1-85,(6 75$163257 3,1%$// *$0(6 :,7+
+,1*(' %$&.%2; ,1 7+( '2:1 326,7,21 21/< $/:$<6 7$.( *5($7 &$5( :+(1 6(59,&,1* $1< *$0(
$/:$<6 5($' 7+( 6(59,&( 0$18$/ %()25( 5(3/$&,1* 25 6(59,&,1* &20321(176 68%67,787,216 2)
3$576 25 (48,30(17 02',),&$7,216 0$< 92,' )&& 7<3( $&&(37$1&(
$OZD\V 'LVFRQQHFW 7KH /LQH 9ROWDJH %HIRUH 6HUYLFLQJ 6RPH 3DUWV 0D\ 6WLOO +ROG &XUUHQW :KHQ 8QSOXJJHG
:DUQLQJ
7+,6 (48,30(17 *(1(5$7(6 86(6 $1' &$1 5$',$7( 5$',2 )5(48(1&< (1(5*< $1' ,) 127 ,167$//('
$1' 86(' ,1 $&&25'$1&( :,7+ 7+( ,16758&7,216 0$18$/ 0$< &$86( ,17(5)(5(1&( 72 5$',2
&20081,&$7,216 ,7 +$6 %((1 7(67(' $1' )281' 72 &203/< :,7+ 7+( /,0,76 )25 $ &/$66 $ &20387,1*
'(9,&( 38568$17 72 68%3$57 - 2) 3$57 2) )&& 58/(6 :+,&+ $5( '(6,*1(' 72 3529,'( 5($621$%/(
3527(&7,21 $*$,167 68&+ ,17(5)(5(1&( :+(1 23(5$7(' ,1 $ &200(5&,$/ (19,5210(17 23(5$7,21 2)
7+,6 (48,30(17 ,1 $ 5(6,'(17,$/ $5($ ,6 /,.(/< 72 &$86( ,17(5)(5(1&( ,1 :+,&+ &$6( 7+( 86(5 $7 +,6
2:1 (;3(16( :,// %( 5(48,5(' 72 7$.( :+$7(9(5 0($685(6 0$< %( 5(48,5(' 72 &255(&7 7+(
,17(5)(5(1&(
5) ,17(5)(5(1&( 127,&( &$%/( +$51(66 3/$&(0(176 $1' *5281' 675$3 5287,1* 21 7+,6 *$0( +$9(
%((1 '(6,*1(' 72 .((3 5) 5$',$7,21 $1' &21'8&7,21 :,7+,1 /(9(/6 $&&(37(' %< 7+( )&& 58/(6 72
0$,17$,1 7+(6( /(9(/6 5(326,7,21 +$51(66(6 $1' 5(&211(&7 *5281' 675$36 72 7+(,5 25,*,1$/
3/$&(0(176 ,) 7+(< %(&20( ',6&211(&7(' '85,1* 0$,17(1$1&(
1RWLFHV
7+,6 '2&80(17 $1' 7+( '$7$ ',6&/26(' +(5(,1 25 +(5(:,7+ ,6 127 72 %( 5(352'8&(' (;&(37 :+(5(
127(' 86(' 25 27+(5:,6(
,1 :+2/( 25 ,1 3$57 72 $1<21( :,7+287 :5,77(1 &216(17 2)
:$51,1*',6&/26('
352'8&76
67(51 3,1%$// ,1&
,1 7+,6 0$18$/ 7+( &203$1< 1$0( $1' '(9,&(6 $1' 7+(
'(6,*1 2) 7+( 0$18$/ ,76(/) $5( 3527(&7(' %< )('(5$/ 3$7(176 $1' 3$7(176 3(1',1* '(6,*1
5(*,675$7,216 75$'(0$5.6 $1' &23<5,*+76 $&7,21 :,// %( 7$.(1 ,1 7+( (9(17 2) ,1)5,1*(0(17 25
,0,7$7,21 7+( 5,*+7 ,6 5(6(59(' 72 &+$1*( 63(&,),&$7,216 :,7+287 35,25 127,&(
‹ 0DQXIDFWXUHG E\ 6WHUQ• 3LQEDOO ,QF
3RUWDOV ,FRQ 'HVLJQV ORJRV QDPHV FKDUDFWHUV
DOO
UHODWHG LQGLFLD DUH WUDGHPDUNV RI 6WHUQ• 3LQEDOO ,QF
‹ $OO 5LJKWV 5HVHUYHG 0DGH LQ WKH 86$
0XOWLEDOO LV D UHJLVWHUHG WUDGHPDUN RI
:LOOLDPV (OHFWURQLFV *DPHV ,QF 8VHG E\ SHUPLVVLRQ
‹ 3OD\ER\ 3/$<%2< 5$%%,7 +($' '(6,*1 %811<
3&% 6FKHPDWLFV 6HFWLRQ &KDSWHU E\ &(6
&26780( DQG )(0/,1 '(6,*1 DUH PDUNV RI 3OD\ER\ DQG
&UHDWLYH (OHFWURQLFV 6RIWZDUH ,QF ‹ XVHG XQGHU OLFHQVH E\ 6WHUQ 3LQEDOO ,QF
,Q 6:,7&+ 0(18
DOVR VHOHFW
$&7,9( DQG
'(',&$7('
6:,7&+ 7(676
6:,7&+0$75,;*5,''(',&$7('6:,7&+(6
D iode O n T erminal S trip :
&ROXPQ
'ULYH
5RZ
5HWXUQ
8
127 86('
:+7%51
&13
8
127 86('
:+75('
&13
8
127 86('
:+725*
&13
8
127 86('
:+7<(/
&13
8
127 86('
:+7*51
&13
8
127 86('
:+7%/8
&13
8
127 86('
:+79,2
&13
8
127 86('
:+7*5<
&13
4
127 86('
*51%51
&13
LEFT
BUTTON
(UK ONLY)
on Cabinet side
4TH
COIN
SLOT
On Coin Door
6TH
COIN
SLOT
On Coin Door
RIGHT
COIN
SLOT
On Coin Door
CENTER
COIN SLOT
/ DBA
On Coin Door
LEFT
COIN
SLOT
On Coin Door
5TH
COIN
SLOT
On Coin Door
RIGHT
BUTTON
(UK ONLY)
on Cabinet side
4
127 86('
*515('
&13
SKILL
SHOT
Under Playfield
RIGHT
ORBIT
Under Playfield
4-BALL
TROUGH #1
(LEFT)
On Assembly
4
127 86('
*5125*
&13
RIGHT
RAMP
ENTER
On Ramp Assy.
RIGHT
RAMP
EXIT
On Ramp Assy.
CENTER
LANE
Under Playfield
NOT
USED
4-BALL
TROUGH #2
On Assembly
4-BALL
TROUGH #3
On Assembly
4-BALL
TROUGH
VUK OPTO
On Assembly
4-BALL
STACKING
OPTO
On Assembly
SHOOTER
LANE
Under Playfield
4
127 86('
*51<(/
&13
POP
BUMPER
EXIT
Under Playfield
DROP
TARGET
On Assembly
LEFT
ORBIT
Under Playfield
SURPRISE
PAKAGE
TARGET
On Assembly
'
2
7 GROTTO
6 EJECT
Under Playfield
NOT
USED
Under Playfield
CENTER
RAMP
EXIT
On Ramp Assy.
LEFT
TOP
LANE
Under Playfield
MIDDLE
TOP
LANE
Under Playfield
TRIANGLE
MECH 1
(RIGHT)
On Assembly
TRIANGLE
MECH 2
(LEFT)
On Assembly
RIGHT
TOP
LANE
Under Playfield
Under Playfield
PEEK-A-BOO
TARGET
On Assembly
VUK
On Assembly
NOT
USED
On Ramp Assy.
On Ramp Assy.
RAMP
BALL
LOCK 3
On Ramp Assy.
RAMP
BALL
LOCK 1
On Ramp Assy.
RAMP
BALL
LOCK 2
On Ramp Assy.
4
127 86('
*51%/8
&13
LEFT
RAMP
ENTER
On Ramp Assy.
4
127 86('
*519,2
&13
LEFT
BUMPER
On Assembly
LEFT
RAMP
EXIT
RIGHT
BUMPER
On Ramp Assy. On Assembly
'
2
7 CENTERFOLD 1 BOTTOM
6 (CLOSED)
BUMPER
On Assembly
On Assembly
TEASE
CENTERFOLD 2 SCREW
(OPEN)
LIMIT
On Assembly
On Assembly
NOT
USED
NOT
USED
Under Playfield
4
127 86('
*51%/.
&13
NOT
USED
Under Playfield
START
BUTTON
Cabinet Front
NOT
USED
On Assembly
On Assembly
NOT
USED
NOT
USED
TOURNAMENT
BUTTON
Cabinet
Front
NOT
USED
Under Playfield
4
127 86('
*51*5<
&13
On Coin Door
PLUMB
BOB
TILT
Inside Cabinet
LEFT
OUTLANE
Under Playfield
LEFT
RETURN
LANE
Under Playfield
LEFT
SLINGSHOT
On Assembly
RIGHT
OUTLANE
Under Playfield
RIGHT
RETURN
LANE
Under Playfield
RIGHT
SLINGSHOT
On Assembly
NOT
USED
NOT
USED
*1'
,&
8
,13876
*URXQG
%/.
&13 3
8
*5<%51
&13
8
*5<5('
&13
8
*5<25*
&13
8
*5<<(/
&13
8
127 86('
*5<*51
&13
8
*5<%/8
&13
8
*5<9,2
&13
8
*5<%/.
&13
#1 LEFT
FLIPPER
BUTTON
in Cabinet side
#2 LEFT
FLIPPER E.O.S
(End-of-Stroke)
in Cabinet side
#3 RIGHT
FLIPPER
BUTTON
in Cabinet side
#4 RIGHT
FLIPPER E.O.S.
(End-of-Stroke)
in Cabinet side
#5
NOT
USED
in Cabinet side
'6
'6
'6
'6
'6
#6 VOLUME
(RED BUTTON)
(In Test: LEFT)
'6
#7 SERV. CRED.
(GREEN BUTTON)
(In Test: RIGHT)
on Coin Door
'6
#8 BEGIN TEST
(BLACK BUTTON)
(In Test: ENTER)
on Coin Door
'6
on Coin Door
,Q /$03 0(18
DOVR VHOHFW
7(67 $// /$036
52: &2/801
/$03 7(676
/$030$75,;*5,'
D iode O n T erminal S trip :
&ROXPQ
Y
5RZ
*1'
4
127 86('
5('%51
-3
4
127 86('
5('%/.
-3
4
127 86('
5('25*
-3
4
127 86('
5('<(/
-3
4
127 86('
5('*51
-3
4
127 86('
5('%/8
-3
4
127 86('
5('9,2
-3
4
127 86('
5('*5<
-3
4
127 86('
5(':+7
-3
4
127 86('
5('
-3
8
127 86('
<(/%51
-3
8
127 86('
<(/5('
-3
JANUARY
#555 Bulb
APRIL
#555 Bulb
#555 Bulb
JULY
#555 Bulb
FEBRUARY
#555 Bulb
MAY
AUGUST
#555 Bulb
OCTOBER
#555 Bulb
BUNNY
#1 (BOTTOM)
#555 Bulb
MIDDLE
TOP LANE
#555 Bulb
NOT
USED
#555 Bulb
MAGAZINE
'276
3&4
#555 Bulb
NOT
USED
#555 Bulb
8
127 86('
<(/25*
-3
MARCH
#555 Bulb
JUNE
#555 Bulb
SEPTEMBER
#555 Bulb
NOVEMBER
#555 Bulb
BUNNY
#2
#555 Bulb
RIGHT
TOP LANE
#555 Bulb
SPLASH
(RT RAMP)
#555 Bulb
DOUBLE
JACKPOT
#555 Bulb
NOT
USED
#555 Bulb
CTRFOLD SPOTLITE STRIP POKER
'276 (LT RAMP) '276
(LT #2)
#555 Bulb
#555 Bulb
DECEMBER
#555 Bulb
BUNNY
#3
#555 Bulb
PHOTO SHOOT
(CENTER)
#555 Bulb
PHOTO SHOOT
(RT ORBIT)
#555 Bulb
JACKPOT
#555 Bulb
PEEK-A-BOO
1&2
#555 Bulb
COLLECT PLAY'276
MATES
#555 Bulb
8
127 86('
<(/%/.
-3
8
127 86('
<(/*51
-3
8
127 86('
<(/%/8
-3
MANSION
1 (LT)
#555 Bulb
LEFT
OUTLANE
#555 Bulb
PHOTO SHOOT
(LT ORBIT)
#555 Bulb
SURPRISE
PACKAGE
#555 Bulb
BUNNY
#4
#555 Bulb
EXTRA
BALL
#555 Bulb
BUNNY
(RT ORBIT)
#555 Bulb
NOT
USED
#555 Bulb
PEEK-A-BOO
3
#555 Bulb
MANSION
2
#555 Bulb
LEFT
RETURN LANE
#555 Bulb
BUNNY
(LT ORBIT)
#555 Bulb
MANSION
3
#555 Bulb
RIGHT
RETURN LANE
#555 Bulb
PHOTO SHOOT
(LT RAMP)
#555 Bulb
DROP
TARGET
#555 Bulb
BUNNY
#10
#555 Bulb
PAJAMA PARTY
HURRY-UP
#555 Bulb
JACKPOT
HURRY-UP
#555 Bulb
NOT
USED
#555 Bulb
TEASE
#555 Bulb
BUNNY
#5
#555 Bulb
GROTTO
ARROW
#555 Bulb
PHOTO SHOOT
(VUK)
#555 Bulb
NOT
USED
#555 Bulb
CTRFOLD SPOTLITE
PEEK-A-BOO
'276
(RT #1)
4
#555 Bulb
#555 Bulb
CTRFOLD SPOTLITE CTRFOLD SPOTLITE LEFT
'276 BUMPER
'276
(LT #1)
'276 (RT #3)
#555 Bulb
#555 Bulb
#555 Bulb
8
127 86('
<(/9,2
-3
MANSION
4 (RT)
#44 Bulb
RIGHT
OUTLANE
#555 Bulb
SPLASH
(LT RAMP)
#555 Bulb
8
127 86('
<(/*5<
-3
SHOOT
AGAIN
#555 Bulb
PEEK-A-BOO
#555 Bulb
MULTIBALL
#555 Bulb
NOT
USED
#555 Bulb
MYSTERY
#555 Bulb
SPECIAL
#555 Bulb
NOT
USED
#555 Bulb
CTRFOLD SPOTLITE
'276
(RT #2)
#555 Bulb
RIGHT & BOTTOM
BUMPERS
#555 Bulb
'276
JACKPOT
(LT RAMP)
#555 Bulb
PAJAMA PARTY
MULTIBALL
#555 Bulb
LEFT
TOP LANE
#555 Bulb
PHOTO SHOOT
(RT RAMP)
#555 Bulb
MAGAZINE
'276
1&2
#555 Bulb
NOT
USED
#555 Bulb
START
BUTTON
#555 Bulb
TOURNAMENT
BUTTON
#555 Bulb
Ä
5
6
7
Visit our website for more current game information, Distribution Lists,
Articles, Contact Information, and check out Technical Support & Part
Sales for a whole lot more! HELP US, HELP YOU! If you have any
suggestions, questions, need technical advice, find errors or have
comments, contact us through our website or simply call us!
ALTHOUGH EVERY EFFORT IS PUT INTO MAKING THIS MANUAL (AND ALL OTHER DOCUMENTS RELATING TO THIS PRODUCT) IS ACCURATE AND COMPLETE,
PLAYFIELD COMPONENTS, FEATURES, RULES, PROGRAMMING AND OPERATION ARE SUBJECT TO CHANGE WITH OR WITHOUT NOTICE.
[email protected]
eMail
4
à Á
3
http://www.SternPinball.com
708-345-7889
Æ
Ä
2
· For metric, multiply inch
value by metric value,
e.g. 5” X 2.54cm =
12.7cm or 127mm.
· For US, multiply metric
value by inch value,
e.g. 13cm X .3937” =
5.1181”
Â
1
1” = 2.54cm /25.4mm
1cm = .3937”
1mm = .03937”
(Option 1) Fax
3/4”
.5”
1/32”
(.03125”)
1/2”
8
Tel
9
708-345-7700
1/4”
.75”
.125”
.0625”
1/8”
Æ
1/16”
1-800-KICKERS
Metric Conversion
.25”
q U.S. q
Customary
Inch Ruler
Games shipped factory direct
to Europe from Stern Pinball,
Inc. are CE approved and will
have an "E" prefix attached to
t h e S e r i a l N u m b e r.
2020 Janice Avenue, Melrose Park, IL 60160
780-5076-00
">