Commercial Catering and R efrigeration Hardware

Commercial Catering and R efrigeration Hardware
Gas Interlock System & Canopy Fittings
Feet & Castors
Catering Hardware
Refrigeration Hardware
KASON :: Reach-In Hardware
KASON :: Walk-In Hardware
Cold Room Hardware
Gaskets & Sweepers
Plumbing Hardware
Gastronorm Pans & Accessories
Fabrication Supplies
Version 6
Commercial Catering and Refrigeration Hardware
Quartz Infrared Lamps
Catalogue Version: 7
The Oxford Hardware Offer
The Oxford Hardware Promise
•
Products for the Fabricator in Catering and Refrigeration
•
Friendly, efficient and reliable customer support
•
Products for the Installer
•
Personalised service
•
Products for the Repair and Service Company
•
Sound technical advice from an experienced team
•
Products for the Ventilation Manufacturer and Installer
•
Extensive stock from a wide range
•
Dedicated sales team in our office or meeting at your premises
•
Sourcing service for products outside the range
•
New products and agencies constantly being added to the range
Andrea Creagh
Cecilia Millar
David Cleave
Roger Spence
Joanne Taylor
Internal Sales
Office Manager
Managing Director
Northern Sales & Ireland
Southern Sales & Scotland
Frankie Ponton
Angela Cuthbert
Jo Hill
Sales
Yolanda
Eden-Kesber
Accounts
Ann Harris
Internal Sales
Credit Control
Purchasing
Bob Keep
Graham Tilley
James Cornish
Mark Harvey
Stores
Stores
Stores
Stores
Sole UK Distributorships
• Kason (USA)
The Crew
Ground Floor Sales Office
• Priolinox (Italy)
• E.P.C.I. (France)
• STUV (Germany)
Distributorship Partners
• Colson Flexello (UK & Worldwide)
• Intertechnica (Italy)
Offices
Warehouse
One of Four
Oxford Hardware Limited
Burland House
Oxhill
Warwick
CV35 0RD
Tel: 01295 680068
Fax: 01295 688123
Email: [email protected]
Internet: www.oxfordhardware.co.uk
• Antiqua (Germany)
• Grohe (Germany)
Company History
Oxford Hardware Limited was set-up in 2001 by
David Cleave who has been in the catering and
refrigeration hardware business since 1996. Prior to
this he had been running a group of wine bars and
restaurants that he started in 1982.
In 2007 Oxford Hardware took over David Holding
Ltd and also became the exclusive distributor for
Kason Inc. in the U.K. and Ireland.
In 2008 the company took over the business of
Specialty Hardware and moved to the much larger
premises in Oxhill.
For Version 7
New
Aluminium
Baffle Filters
Gas Interlock
System GO4 GO5
Cold Room
Sliding Door Gear
Stainless Steel
Latches & Hinges
12
9
81
66-69
Cold Room
Latches & Hinges
+ STUV
Refrigeration
Hardware
Gaskets
Gastro Technix
Pre-rinse Sprays
Strainer / Wastes
83-84
88-97
106
108
Stainless Steel
Under Counter
Drawer
With
Lock
Cutlery Cylinder
Sweepers
Intertechnica
Oven Latch
30
123
98-100
46
Portable Hand
Wash Unit
Paddle Latches
Wall Mixer
Basin Taps
110
23
112
113
Priolinox
3075/11R
Self -close
Drawer Slide
Evaporator Trays
Compensation
Valves
43
28
59
59
Quartz Infrared Lamps
Gas Interlock System & Canopy Fittings
1-6
7 - 14
KASON :: Walk-In Hardware
61 - 78
Cold Room Hardware
79 - 86
Feet & Castors
15 - 19
Gaskets & Sweepers
87 - 100
Catering Hardware
21 - 39
Plumbing Hardware
101 - 118
Refrigeration Hardware
41 - 46
Gastronorm Pans & Accessories
119 - 124
KASON :: Reach-In Hardware
47 - 59
Fabrication Supplies
125 - 127
Full Part Number Index Back of Catalogue
Quartz Infrared Lamps
300W Lamps
Catering Hardware
2
Bulbs, reflectors & holders
500W & 1000W Lamps & Accessories
3-4
5
23-24
Locks
25
Plunger, drawer, through door, edgemount & utility locks
5
Variable, pre-set, high surge resistant & RFI suppresion
Ceramic Lamps
Catches
Shoot bolts, magnetic, friction catches & paddle latches
Lamps & bulbs
Dimmers
22-23
Flush door pulls, handles, decorator handles & knobs
Bulbs, reflectors, gourmet lamps, end caps & sleeving
Gantry Lamps, Rise & Fall Heat Shades
Door Pulls, Handles & Knobs
Hinges
26
Flag, butt, continuous (piano) & block hinges
5
300W, 500W & 1000W
Divider Bar & Cap Strip
26
Stainless steel
Porcelain Connectors
5
Drawer Slides
1, 2 & 3 way
27-30
Steel zinc plated, stainless steel & Accuride
Incoloy Elements & Accessories
6
Undercounter Drawers
2’ to 10’ lengths, regulator & heat proof cable
30
Complete undercounter drawers
Tray Slide Brackets
Gas Interlock System & Canopy Fittings
G.I.S. :: Gas Interlock System
31
Standard & drop down
8-10
Cuts off gas flow in the event of kitchen extract fan failure
Wall Shelves
32
Stainless steel
G.P.S. :: Gas Proving System
11
Gas supply cannot be switched on if insufficient pressure
Baffle Filters
Sliding Door Track & Accessories
12
Large range of aluminium and stainless steel sizes
Surface Mounted Bulkhead Lamp Fixture
Scrap Rings
13
32
Door track, sheaves, door guide, door stop & pin guide
33
Durable rubber, wide aperture & low profile
Fixture housing & globe
Rubber & Plastic Accessories
Canopy Lamps :: Twin
13
33
Corner & strip bumpers, collars & tube connectors
Twin recessed & twin surface mounted
Dormont Gas Hoses
Silicone Sealant
14
34
Most flexible, long lasting hose with unique design features
Range of sealants & gun
Stainless Steel Collars
Divider Bar & Cap Strip
14
34
32, 38 & 50mm
Stainless steel
Plate Lowerators
35
Heated, unheated, fixed & adjustable
Feet & Castors
Heated In Counter Soup Well
Adjustable Foot Inserts
16-17
35
With drain kit
To fit square tube
End Caps & Threaded Inserts
16-17
Square, rectangular & round
Stainless Steel Levelling Feet
17
2”, 3”, 4” & 5” standard & stainless steel
36
For 6-46oz cups
Glass Clamps
37
6-10mm glass clamps for round tube
Available with round, octagonal or flanged feet
Castors :: Catering
Lid & Cup Dispensers
18-19
Hardware for Glass & Rigging
SWS range, ANTIQUA range & architectural rigging
37-39
Refrigeration Hardware
Priolinox
Gaskets & Sweepers
42-43
Modular cabinet doors, drawers & accessories
Pilaster & Clips
44
98-100
44-45
Plumbing Hardware
46
Pre-rinse Sprays :: Aquajet Range
102-105
Sprays & commercial faucets
Locking, non-locking & Intertechnica Oven Latch
Aquajet :: Retractable Wash Down Hose
KASON :: Reach-In Hardware
Hinges
Sweepers
Brush strip and rubber
Edgemount, pivot & power
Latches
88-97
Refrigeration, compression and magnetic
Stainless steel or aluminium
Hinges
Gaskets
105
Wall mounted, heavy duty
48-53
Pre-rinse Sprays :: Gastro Technix Range
Adjustable, spring, cam-rise, flange & pivot
106-107
With gas strut return
Latches
54-58
Sink Bowls :: Waste Kits :: Accessories
Magnetic, edgemount, mechanical & trigger action
108-109
59 different types & sizes available from stock
Compensation Valves
59
Wash Hand Basins
Internal, external
110
Standard, knee-operated, electronic and portable
Evaporator Trays
59
Designed for longer life and energy savings
Grohe Taps & Accessories
62-67
Cam-rise, reversible, strap & knuckle
Door Closers
67-68
69-74
Inside Release Handles
73
Trapped Person Alarm
75
Ventilator Ports
117
Taps, spouts & valves
Plumbing Accessories
76
116
Unique self-contained electronic hands free tap
Delabie :: Taps & Soap Dispensers
Internal push button, sign, battery & siren
114-115
Commercial range
Infrared Taps
Safety-Glow™, paddle & recessed
112-113
Bib taps, deck mixers, basin taps & sink taps
Aquajet :: Taps
Magnetic, edgemount, mechanical & trigger action
111
High quality specification
Taps
Hydraulic & spring
Latches
111
For fast drainage
KASON :: Walk-In Hardware
Hinges
Waste Outlets :: Twist Handle
118
Valves, water hoses & Bain Marie drains
Heated, non-heated, vents & cover plates
Panel Fasteners
77-78
Locking points, hooks, strikes & accessories
Containers & Accessories
81-82
Rail, runners, supports, handles. mountings, stop & shoes
Latches & Handles
Fabrication Supplies
83-84
Day, night, exit, lever off and Euro 2000
Hinges, Hasp & Staple
Rail, runners, supports, handles. mountings, stop & shoes
119-124
Plain, perforated, polypropylene, lids, handles, pads,
plates trivets, shelves, drainers, pots, cylinders wells
& more
Cold Room Hardware
Sliding Door Gear
Gastronorm Pans & Accessories
Silicone Sealant
126
Range of sealants & gun
85-86
Cutting, Cleaning & Polishing
Abrasives & polish for cutting, cleaning & finishing
126-127
visit
www.oxfordhardware.co.uk
Latest Product Information
New Products
Full Search of Products AND Part Numbers
Catalogue Downloads
More About ‘The Crew’...
Quartz
Infrared Lamps
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
1
Quartz Infrared Lamps
QUARTZ INFRARED LAMPS
300 Watt Lamps
T
Bulbs :: All 118mm (4 5/8”) long
300W
Infrared lamps are low pressure tungsten halogen heat lamps. The filament is
tungsten surrounded by a halogen dosed gas and encapsulated in a transparent
quartz glass sleeve. These lamps have a short wave infrared output and heat by
direct radiation the object in the path of the energy.
REFLECTOR
300W Quartz Infrared Lamp Requires:
+
Reflector
Standard catering bare quartz bulb 100W, low pressure
IRL200B
Standard catering bare quartz bulb 200W, low pressure
IRL300B
Standard catering bare quartz bulb 300W, low pressure
IRL500B
Standard catering bare quartz bulb 500W, low pressure
R713908R
Philips foodsafe bare quartz bulb 300W, low pressure
+
Bulb Holder
Bulb Selection
Reflector
IRL300SUR
IRL100B
Jacketed lamps have an additional free-moving glass sleeve to protect the inner
sleeve from any outside contact that can cause heat spots and reduce the life span.
In addition the jacket stops inner glass (if shattered) from falling into food.
•
Greatly increases safety at food
outlets
•
Minimises chance of glass falling
into food
Reflector for 300 Watt bulbs
Holder
IRL100JV
Jacketed quartz bulb 100W, low pressure
IRL200JV
Jacketed quartz bulb 200W, low pressure
IRL300JV
Jacketed quartz bulb 300W, low pressure
IRL500JV
Jacketed quartz bulb 500W, low pressure
NB: 110v versions available: Please enquire
IRL309
Bulbs :: Tungsten :: All 118mm (4 5/8”) long
Holder for 300
Watt bulbs
Assemblies :: Reflector / Holder / Bulb
QUARTZBARE300
Standard Tungsten Halogen lamps can be
used as heat lamps and have much lower
heat output but a far greater light output.
They are commonly used as external
floodlights. These are high pressure and
more prone to explode. There are no jacketed versions available.
300W Bare assembly
QUARTZJACKET300V
300W Jacketed assembly
2
THL100B
Bare tungsten halogen bulb 100W, high pressure
THL150B
Bare tungsten halogen bulb 150W, high pressure
THL200B
Bare tungsten halogen bulb 200W, high pressure
TUNGLAMP300
THL300B
Bare tungsten halogen bulb 300W, high pressure
300W Tungsten halogen assembly
THL500B
Bare tungsten halogen bulb 500W, high pressure
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
Quartz Infrared Lamps
Push In Lamp Requires:
T
+
Push-in Lamp Reflector
QUARTZ INFRARED LAMPS
500 Watt Lamps
500W
REFLECTOR
Push-in Bulb Selection
Push-in Lamps :: Reflectors / Holders
Standard Lamp Requires:
IRL500PHR
+
Holder & reflector
for push-in 500
Watt bulbs
Standard Lamp Reflector
Standard Bulb Selection
Standard Lamps :: Reflectors / Holders
Push-in Lamps :: Bulbs
•
Staff can easily change bulb
•
No costly call-outs for
operators
•
220mm (8 21/32”) long
IRL300PJ
Jacketed quartz bulb 300W
IRL500PJ
Jacketed quartz bulb 500W
IRL500PB
Bare quartz bulb 500W
IRL500LHR
Holder & reflector
for 500 Watt bulbs
Standard Lamps :: Bulbs for 500W Holder
•
•
216mm (8 1/2”) Long
Hard wired with flying leads
Infrared lamps are low pressure tungsten halogen heat lamps. The filament is
tungsten surrounded by a halogen dosed gas and encapsulated in a transparent
quartz glass sleeve. These lamps have a short wave infrared output and heat by
direct radiation the object in the path of the energy.
Lamps :: Assemblies
QUARTZJACKET1000PI
QUARTZBARE500
500W Bare assembly (with flying leads)
QUARTZJACKET500
500W Jacketed assembly (with flying leads)
QUARTZJACKET300PI
300W Jacketed assembly (push in lamp)
QUARTZJACKET500PI
500W Jacketed assembly (push in lamp)
IRL300LHRB
Bare quartz bulb 300W (for 500W holder)
IRL500LHRB
Bare quartz bulb 500W
Jacketed lamps have an additional free-moving glass sleeve to protect the inner
sleeve from any outside contact that can cause heat spots and reduce the life span.
In addition the jacket stops inner glass (if shattered) from falling into food.
•
Greatly increases safety at food outlets
•
Minimises chance of glass falling into food
Lamps :: Accessories
IRLCAPS
OHSL01
IRLCAPS
End caps for push-in lamps
OHSL01
High temperature cable sleeving (180°C), p.metre
IRL100LHRJ
Jacketed quartz bulb 100W (for 500W holder)
IRL200LHRJ
Jacketed quartz bulb 200W (for 500W holder)
IRL300LHRJ
Jacketed quartz bulb 300W (for 500W holder)
IRL500LHRJ
Jacketed quartz bulb 500W
All bulbs are low pressure
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
3
Quartz Infrared Lamps
QUARTZ INFRARED LAMPS
1000 Watt Lamps
W
1000W
Standard Lamp Requires:
REFLECTOR
+
Standard Lamp Reflector
Standard Bulb Selection
Infrared lamps are low pressure tungsten halogen heat lamps. The filament is
tungsten surrounded by a halogen dosed gas and encapsulated in a transparent
quartz glass sleeve. These lamps have a short wave infrared output and heat by
direct radiation the object in the path of the energy.
Standard Lamps :: Reflector
Jacketed lamps (denoted by a ”J” at the end of the code) have an additional
free-moving glass sleeve to protect the inner sleeve from any outside contact that
can cause heat spots and reduce the life span. In addition the jacket stops inner
glass (if shattered) from falling into food.
Push In Lamp Requires:
IRL1000LHR
+
Push-in Lamp Reflector
Holder & reflector for 1000 Watt bulbs
Push-in Bulb Selection
Standard Lamps :: Bulbs for 1000W Holder
Push-in Lamps :: Reflector
•
•
350mm (13 25/32”) Long
IRL1000LHRB
IRL1000PHR
Hard wired with flying leads
IRL1000LHRJ
IRL1000LHRB
Bare quartz bulb 1000W
IRL1000LHRJ
Jacketed quartz bulb 1000W
Holder & reflector for push-in 1000 Watt bulbs
Push-in Lamps :: Bulbs
Gourmet Heat Lamp :: Infrared
•
Staff can easily change bulb
•
No costly call-outs for operators
•
350mm (13 25/32”) long
HOW DOES IT WORK?
By doping the quartz with the rare earth element neodymium, the yellow light is
absorbed which has the effect of brightening reds and greens and increasing red
green contrast.
It is perfectly safe for catering applications, keeps food warm and also enhances
its appearance. Butchers have been using similar methods for years.
For operation simply replace bulbs in standard catering fittings
IRL1000PJ
Jacketed quartz bulb 1000W
Lamps :: Assemblies
Product
Power
Code
IRL300JVGT 240V 300W
IRL300PJGT 240V 300W
IRL500PJGT 240V 500W
A
Overall
118mm (4 5/8”)
220mm (8 5/8”)
220mm (8 5/8”)
B
Filament
75mm (2 15/16”)
150mm (5 15/16”)
150mm (5 15/16”)
C
Contacts
114mm (4 1/2”)
216mm (8 1/2”)
216mm (8 1/2”)
QUARTZJACKET1000PI
QUARTZBARE1000
1000W Bare assembly (with flying leads)
IRL300JVGT
Jacketed lamp, 240V 300W, gourmet, 118mm (4 5/8”)
QUARTZJACKET1000
1000W Jacketed assembly (with flying leads)
IRL300PJGT
Jacketed lamp, 240V 300W, gourmet, 220mm (8 5/8”)
QUARTZJACKET1000PI
1000W Jacketed assembly (push in lamp)
IRL500PJGT
Jacketed lamp, 240V 500W, gourmet, 220mm (8 5/8”)
All bulbs are low pressure
4
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
Quartz Infrared Lamps
Porcelain Connectors
•
All dimmers come complete with
knob and bezel
•
Variable phase angle type
•
Maximum 3.5 kW capacity
•
Installer should use a heat sink
Gantry Lamps
•
QUARTZ INFRARED LAMPS
Dimmers
Infrared suspended lamp holder complete with ceramic holder and 150mm flex
X110 1 way terminal block 15A
OHDIMAP
Dimmer with
pre-set selection
X130 1 way terminal block 30A
OHDIMAV
L5934 - Silver
Dimmer with
variable control
L5933 - Bronze
L5931 - Copper
X210 2 way terminal block 15A
OHDIMCVHS
Dimmer with
variable control,
high surge
resistant
X230 2 way terminal block 30A
OHDIMBPRFI
L5934
Silver anodised gantry lamp
Dimmer with
pre-set selection
and RFI
suppression
L5933
Bronze anodised gantry lamp
L5931
Copper anodised gantry lamp
X310 3 way terminal block 15A
Rise & Fall Heat Shades
OHDIMBVRFI
Dimmer
with variable
control and RFI
suppression
X330 3 way terminal block 30A
•
Switch mounted on shade
•
Other colours available
•
Adjustment range 24”
Quartz Bulb
•
Suits Gantry Lamps
•
Suits Rise & Fall Heat Shades
Ceramic Lamps
QCL500
L5981 Brushed Aluminium
QCL300
Ceramic lamp 300W
QCL500
Ceramic lamp 500W
IR300CH
QCL1000 Ceramic lamp 1000W
Oxford Hardware Limited Tel: 01295 680068
300W Hard glass
quartz bulb with
Eddison screw
L5987 Brushed Brass
L5981
Brushed Aluminium Rise & Fall Heat Shade
L5987
Brushed Brass Rise & Fall Heat Shade
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
5
Quartz Infrared Lamps
QUARTZ INFRARED LAMPS
Incoloy Elements and Accessories
•
Tubular sheathed Elements 7.94mm (5/16”) diameter with 50mm (2”) cold ends
•
Recommended Energy Regulator includes Knob, Bezel, Nuts and Washers
•
Fully annealed. Can be bent into any shape repeatedly
•
Elements can be shaped to order (minimum quantities apply)
•
Fixing kit gland of Olive, Captive Nut, Lock Nut, Brass and Fibre Washers
•
Suitable for wet or dry applications
•
Brass Terminal Pillar (as alternative to ring, spade or forked terminals)
Straight Length Incoloy Elements
•
Accessories
All elements 240V (other voltages to order)
610mm (24”) Length
1524mm (60”) Length
2405
500 Watts
6010
1000 Watts
2410
1000 Watts
6015
1500 Watts
2420
2000 Watts
6020
2000 Watts
915mm (36”) Length
3605
3610
500 Watts
1000 Watts
7210
BTP
¼” BSP Brass terminal
pillar
•
Infinite control plus OFF and FULL
•
3kW capacity
•
Suits panel thickness up to 3/16” maximum
•
Fast On spade terminals
•
Replaces 31ERITH
Simmerstat: Energy Regulator, Bezel, Black Knob
41ER110W1
Simmerstat: Energy Regulator, Bezel, White Knob
Heat Proof Cable
500 Watts
•
SIAFGL 1.5mm and 2.5mm diameter, single core
1000 Watts
•
Silicone glass fibre braided
3615
1500 Watts
7215
1500 Watts
3620
2000 Watts
7220
2000 Watts
1220mm (48”) Length
Body, Olive, Captive
Nut, Lock Nut, set of
Brass and Fibre washers
41ER110B1
1828mm (72”) Length
7205
FIXFIT
•
100 metre roll, order by the metre
•
Temperature Range: -60°C to +180°C
2438mm (96”) Length
4805
500 Watts
9605
500 Watts
4810
1000 Watts
9610
1000 Watts
4815
1500 Watts
9615
1500 Watts
4820
2000 Watts
9620
2000 Watts
4830
3000 Watts
9630
3000 Watts
3048mm (120”) Length
12015
1500 Watts
CAB.BLUE
Cable, blue, 1.5mm diameter
12020
2000 Watts
CAB.BROWN
Cable, brown, 1.5mm diameter
12025
2500 Watts
CAB.YEL/GRN
Cable, yellow / green, 1.5mm diameter
12030
3000 Watts
CAB.WHITE
Cable, white, 1.5mm diameter
CAB.RED
Cable, red, 1.5mm diameter
CAB.BLACK
Cable, black, 1.5mm diameter
2.5mm Heat Proof Cable
6
Oxford Hardware Limited Tel: 01295 680068
CAB.BLUE2.5
Cable, blue, 2.5mm diameter
CAB.BROWN2.5
Cable, brown, 2.5mm diameter
CAB.YEL/GRN2.5
Cable, yellow / green, 2.5mm diameter
CAB.WHITE2.5
Cable, white, 2.5mm diameter
CAB.RED2.5
Cable, red, 2.5mm diameter
CAB.BLACK2.5
Cable, black, 2.5mm diameter
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
Gas Interlock System
& Canopy Fittings
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
7
Gas Interlock System & Canopy Fittings
G.I.S. :: Gas Interlock System
G.I.S. & CANOPY FITTINGS
CUTS OFF GAS FLOW IN THE EVENT OF KITCHEN EXTRACT FAN FAILURE
NOW A MANDATORY REQUIREMENT IN MOST COMMERCIAL KITCHENS
HOW G.I.S. WORKS
WHEN IS A GAS INTERLOCK SYSTEM A MANDATORY REQUIREMENT?
Sensors placed either side of the ductwork fan monitor air pressure. They are
connected to an air differential switch, which is activated when the pressure
difference changes. Alternatively the current taken by the fan can be monitored by
a fan power sensor. The 230V G.I.S. monitors this switch/sensor and in the event of
fan failure will close the gas solenoid and cut off the gas flow to kitchen appliances.
•
On installation of a completely new extraction/ventilation canopy
•
On installation of a completely new gas pipework run
•
On installation of a completely new cook line or layout
•
With any fitting of Category ‘B’ equipment e.g. combination ovens, deep fryers,
grills, charcoal griddles. This includes replacements to an existing layout
SYSTEM REQUIREMENTS
GIS - One of G01N, G02, G02R, G04, G05
•
Air Differential Pressure Switch OR Fan Power Sensor
•
Electrically operated normally closed, Gas Safety Shut-off Solenoid Valve
•
Remote Emergency Shut-Off Switch (Optional)
GO1N
CONTROLLER
OR
•
GO2, GO2R
+
+
Air Differential Pressure Switch
and / or Fan Power Sensor
OR
+
Solenoid Valve
Emergency Switch (optional)
GO4, GO5
8
OPTIONAL EXTRAS
Important documents / notes for your consideration and reference:
Honeywell Gas Solenoid Valves for pipe sizes ½” to 4”
Corgi Technical Bulletin - TB 130 BS 6173
Air Differential Pressure Switch with 2 metres of tubing
Gas Supply (Installation and Use) Regulation GSIUR27-4
Fan Power Sensor
HSE Information sheet No 23 – Gas Safety in Catering and Hospitality
Remote Emergency Cut-Off Switch
HSE CIS Sheet No. 10 - (Rev. 1)
Gas Proving System
HVCA Guidance - DW 172
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
Gas Interlock System & Canopy Fittings
G.I.S. :: Controller :: G01N
G.I.S. :: Controllers :: G02, G02R
ADVANTAGES OF THE G01
ADVANTAGES OF THE G02
Brushed stainless steel fascia fits 44mm deep surface gang box (white plastic box
supplied). GIS standard box can be recessed into wall for flush fitting. (Hole size
required – 150mm wide, 90mm high, 45mm deep. Minimum hole size required for
GIS to fit through a Panel – 130mm width, 80mm height.)
Smartest and most compact design on the market
•
Clear and simple instructions with diagrams
•
Easy to Operate One button operation. All features explained fully on the
fascia plate
G.I.S. & CANOPY FITTINGS
Benefits
Oxford Hardware then introduced an improved and evolved Gas Interlock System
since overrides were phased out.
The ’R’ model has an emergency cut off switch built in.
Benefits:
•
Market leading GIS System
Market leading Fan Power Sensors and Air Differential Pressure Switches available
•
Highly Competitive Price One of the most competitive gas interlock system
on the market with numerous functions as standard
•
•
All models can monitor 2 fans
•
Instant Delivery Next day delivery anywhere in the U.K. from stock
•
Larger back box allows easy access for wiring
•
Option of built-in Emergency Stop
Features
•
Anti Back Pressure feature on all models
•
Complies with BS6173(2001) and Regulation 27(4) of the Gas Safety
(Installation and Use) Regulations 1998
•
Competitively priced
•
All GIS items are available Ex-Stock
•
Each G.I.S. can handle one or two fans
•
Manufactured in the U.K. with a one year parts guarantee
•
Multiple G.I.S’s can be wired together to operate more than two fans
•
Back pressure sensitive – 10 second activation delay
•
LED lamps and high quality components
•
Easy to clean and protected to IP56
•
Surface or recessed installation – neat and compact
•
Manufactured in the U.K. with a one year parts guarantee FP1
G02R :: Includes built in emergency cut off
G01 N
G.I.S. with no manual override
FP1
Finger plate for recessed G01 in brushed stainless steel
G02
G.I.S. Single Sensor
G02R
G.I.S. Single Sensor, Built-in Emergency Cut-Off
G.I.S. :: Controllers :: G04, G05 :: With Built-in Sensors and Fan Speed Controllers
Oxford Hardware can now introduce two new members to the evolving GIS family: the G04 and the G05
Key Points:
•
G05 is a single box with two Fans On/Off, two Fan Speed Controllers, two Fan
Power Sensors and the Gas Interlock Panel
•
G04 is the economy model with connections for Air Differential Pressure
Switches, two Fans On/Off, two Fan Speed Controllers and the Gas Interlock
Panel
•
More competitive solution than buying separate components
•
Large saving on cost of wiring individual components
•
Each model can monitor two fans
•
Modern design and most compact product on the market (smaller than A4)
•
All items in stock for next day delivery
G04
FAN
FAN
Features:
13A 230V
POWER SUPPLY
•
Easy to install
•
Easy to operate. Complete and simple instructions on the fascia
•
All pre-wired internally
•
Audible alarm
•
Built-in Emergency Stop
•
Connections for Remote Emergency Stop and Fire Alarm Panel
•
Anti back pressure feature (ignores back draughts in ducting)
•
Large heatsink increases life of unit
•
Fan soft start feature
•
Made in U.K. and C.E. marked
•
Guaranteed for parts only against manufacturing defects for one year
Oxford Hardware Limited Tel: 01295 680068
Air Differential
Pressure Switch
FAN
INTAKE
(G04 Only)
REMOTE
EMERGENCY STOP
2
(optional)
CORE
G04
Air Differential
Pressure Switch
FAN
EXTRACT
GIS
G05
(G04 Only)
3
GAS SOLENOID
CORE
G04
GIS including fan speed control
G05
GIS including fan speed control and current sensors
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
9
Gas Interlock System & Canopy Fittings
G.I.S. :: Accessories
SYSTEM REQUIREMENTS
G.I.S. & CANOPY FITTINGS
GO1N
CONTROLLER
OR
GO2, GO2R
+
+
GIS - One of G01N, G02, G02R,
G04, G05
•
Air Differential Pressure Switch OR
Fan Power Sensor
•
Electrically operated normally closed,
Gas Safety Cut-off Solenoid Valve
•
Remote Emergency Shut-Off Switch
(Optional)
+
Solenoid Valve
Air Differential Pressure Switch
and / or Fan Power Sensor
OR
•
Emergency Switch (optional)
G.I.S. :: Fan Power Sensor
G.I.S. :: Air Differential Pressure Switch
ADVANTAGES OF THE FAN POWER SENSOR (FPS 55 or FPS 330)
•
Monitors over and under power consumption
•
Can detect blocked filters and loss of impellers
•
Alternative to Air Differential Pressure Switch (ADS20)
•
Two models cover all relevant fan sizes from 50W (0.2A) to 3kW (13A)
•
Fan power sensor is tuned by installer to the exact output of each fan
•
Designed to allow for electrical current variation caused by fan controllers
•
G.I.S. can monitor two Fan Power Sensors
•
Suitable for single and three phase supply
EXT
ADS20
ADS20
20-300Pa air differential pressure switch and 2meters
of piping
EXT
Extension kit including 2 metres additional piping
and 2 connectors
ADSBRACKET
Bracket for ceiling mount
G.I.S. :: Emergency Switch
RECS
Remote emergency
cut-off switch
G.I.S. :: Gas Solenoid Valves
10
•
Normally closed gas solenoid valve
•
CE Approved and compliant with
EN161
•
•
VE050
12mm (½”)
VE075
19mm (¾”)
230V
VE100
25mm (1”)
Manufactured
by Honeywell
VE125
32mm (1 ¼”)
VE150
38mm (1 ½”)
VE200
50mm (2”)
VE250
62mm (2 ½”)
FPS 55
Fan power sensor for fans 50W (0.2A) to 500W (2.2A)
VE300
75mm (3”)
FPS 330
Fan power sensor for fans 300W (1.3A) to 3kW (13A)
VE400
100mm (4”)
Oxford Hardware Limited Tel: 01295 680068
VE200
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
Gas Interlock System & Canopy Fittings
G.P.S. :: Gas Proving System
G.I.S. & CANOPY FITTINGS
VEGP As Shown: Left Hand Version
•
Ensures that the gas supply cannot be switched on if appliances or pipes are
leaking
•
Equipment includes modified solenoid and G.P.S. control box
•
Order as Left OR Right Handed
•
Easy to fit as all pre-wired
•
Requires G.I.S. box (see previous page) to operate
•
Simple and failsafe test takes less than 20 seconds
Operation
•
High quality components (Honeywell & Dungs)
•
To suit gas supplies from ¾” to 2”
Check all pilot lights are extinguished. Turn on fans. Activate gas interlock system
by pressing START button on G.I.S. Conduct gas proving by pressing START button
on gas proving system (G.P.S). Hold the button for up to 20 seconds. If pressure in
the system is sufficient then the solenoid will open and allow the gas to flow to the
appliances.
Designed to work with
G.I.S. which should be
ordered separately
Why fit Gas Proving?
To comply with current gas regulations, any kitchen fitted with gas appliances that
do not have flame safety devices is advised to have a gas proving system installed
to comply with CORGI best practice. G.P.S. is designed to match and work with any
one of Oxford Hardware’s Gas Interlock Systems (G.I.S.).
VEGP075 LH/RH
19mm (¾”) normally closed gas solenoid valve with Gas Proving System
VEGP100 LH/RH
25mm (1”) normally closed gas solenoid valve with Gas Proving System
VEGP125 LH/RH
32mm (1 ¼”) normally closed gas solenoid valve with Gas Proving System
VEGP150 LH/RH
38mm (1 ½”) normally closed gas solenoid valve with Gas Proving System
VEGP200 LH/RH
50mm (2”) normally closed gas solenoid valve with Gas Proving System
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
11
Gas Interlock System & Canopy Fittings
Baffle Filters
Why use Baffle Filters?
G.I.S. & CANOPY FITTINGS
There is an increasing need to maintain and improve hygiene standards and reduce fire hazards within kitchens.
The baffle grease filter accomplishes both needs through its clever design of interlocking baffles that provide
a tortuous route for the passage of air through the filter by creating two rapid 180° air direction changes
simultaneously. The grease molecules having a far greater inertial force than air, impact themselves on the vanes.
A series of vertical Stainless Steel vanes are housed in a channel frame, with each of the baffles strategically
aligned to provide the highest potential for grease removal. Due to the smooth nature of the vanes the grease
naturally runs downwards, through the drainage holes and into the collecting trays normally provided within the
canopy holding casings.
Width
The filters comply with the requirements of DW.172.
Approved to DIN18869-5.
Depth
Ordering Example
The Product Code box below shows the dimensions of
each baffle filter available.The Dimensions are written as
(Height x Width x Depth). See illustration Right
•
Heat, flame and grease proof
•
All filters complete with handles
•
Easily cleaned in a dishwasher or by soaking or
spraying
Baffle Filters :: Stainless Steel
SSF1020
SSF1616
SSF1818
Volume
240 x 490 x 48mm 390 x 390 x 48mm 440 x 440 x 48mm
cfm m³/hour
Δ P (Pa)
Δ P (Pa)
Δ P (Pa)
74
125
35
30
18
148
250
62
50
30
221
375
94
72
44
295
500
120
95
58
369
625
150
118
74
443
750
180
141
87
516
875
165
101
590 1000
188
116
664 1125
130
738 1250
145
811 1375
154
885 1500
164
959 1625
183
1033 1750
203
12
Height
Baffle Filters :: Aluminium
Technical Data
* Note Baffle filters may be
used at higher rated capacities
whilst retaining their efficiency,
however it should be noted
that this will increase their
resistance to air
Recommended airflow at 1.8
metres per second
Gravimetric efficiency 65%
to 75%
Initial pressure difference:
80 Pa
Final pressure difference: No
difference
Fire resistant: MO
Packaging: Boxes of 6
SSF1020
Baffle filter 245 x 490 x 48mm, (10 x 20 x 2”)
SSF1616
Baffle filter 390 x 390 x 48mm, (16 x 16 x 2”)
SSF2016
Baffle filter 490 x 390 x 48mm, (20 x 16 x 2”)
SSF1818
Baffle filter 440 x 440 x 48mm, (18 x 18 x 2”)
SSF2424
Baffle filter 590 x 590 x 48mm, (24 x 24 x 2”)
AIR FLOW CHARACTERISTICS Nominal Filter Size (inches) Static Pressure
Flow Rate 10 x 20 12 x 16 12 x 20 16 x 16 16 x 20
20 x 20
16 x 25
(cfm)
200
0.13
0.15
0.10
0.07
0.04
0.04
0.04
250
0.20
0.23
0.16
0.12
0.07
0.06
0.07
300
0.29
0.33
0.23
0.17
0.09
0.08
0.09
400
0.52
0.59
0.40
0.30
0.17
0.15
0.17
450
0.66
0.75
0.51
0.38
0.21
0.19
0.21
500
0.81
0.93
0.63
0.46
0.26
0.23
0.26
550
0.98
1.12
0.76
0.56
0.32
0.28
0.32
600
1.17
0.90
0.67
0.38
0.33
0.38
650
1.06
0.79
0.45
0.39
0.44
700
0.91
0.52
0.45
0.51
750
1.05
0.59
0.52
0.59
800
0.68
0.59
0.67
850
0.76
0.67
0.75
900
0.85
0.75
0.85
950
0.95
0.83
0.94
1000
1.05
0.92
1.04
20 x 25
Depth: 46mm (1 13/16”)
Stocked sizes are in BOLD
ALF1016
Aluminium Baffle Filter, 250 x 410mm (10 x 16”)*
ALF1216
Aluminium Baffle Filter, 300 x 410mm (12 x 16”)
ALF1616
Aluminium Baffle Filter, 410 x 410mm (16 x 16”)
ALF2016
Aluminium Baffle Filter, 500 x 410mm (20 x 16”)
Baffle Filters :: Stainless Steel :: Mirror Finish
ALF2516
Aluminium Baffle Filter, 640 x 410mm (25 x 16”)
•
This pair of filters are slightly differently designed and come mirror finished
ALF1020
Aluminium Baffle Filter, 250 x 500mm (10 x 20”)
•
Optimal Conditions:
Front air velocity between
1.10 and 1.33m/s.
Flow rate for standard filter
(500 x 500 x 50mm)
is between 1.000 and 1.200m³/h
ALF1220
Aluminium Baffle Filter, 300 x 500mm (12 x 20”)
ALF1620
Aluminium Baffle Filter, 410 x 500mm (16 x 20”)
ALF2020
Aluminium Baffle Filter, 500 x 500mm (20 x 20”)
ALF2520
Aluminium Baffle Filter, 640 x 500mm (25 x 20”)
ALF1025
Aluminium Baffle Filter, 250 x 640mm (10 x 25”)
Optimal Working Conditions
Air Flow Rate
Face Velocity Initial Pressure Drop
1.100m³/h
1.25m/s
4mm c.d.a
1.200m³/h
1.40m/s
4mm c.d.a
1.500m³/h
1.70m/s
8mm c.d.a
1.800m³/h
2.00m/s
16mm c.d.a
NB: The pressure drop is constant
ALF1225
Aluminium Baffle Filter, 300 x 640mm (12 x 25”)
BSSF1620
Baffle filter 400 x 495 x 48mm, (16 x 20 x 2”)
ALF1625
Aluminium Baffle Filter, 410 x 640mm (16 x 25”)
BSSF2020
Baffle filter 500 x 495 x 48mm, (20 x 20 x 2”)
ALF2025
Aluminium Baffle Filter, 500 x 640mm (20 x 25”)
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
0.03
0.04
0.06
0.11
0.14
0.18
0.21
0.25
0.30
0.35
0.40
0.45
0.51
0.57
0.64
0.71
Gas Interlock System & Canopy Fittings
Canopy Lamps :: Twin
G.I.S. & CANOPY FITTINGS
•
High quality but economically priced
•
Easy lamp replacement
•
One side hinged, other side quick release
•
Option of recessed or surface mounted fitting
•
High frequency balance and triphosphor tubes included
•
LUX Rating 439 (2ft), 1117 (4ft)
•
Heat, flame and grease proof
•
DW172 compliant
•
Rated IP55
Main body
Dimensions
Width of end
Cut out
HxWxD
and side flange
required
275 x 735 x 85
CLSM2
X
X
(10 53/64” x 28 15/16” x 3 11/32”)
274 x 1334 x 85
CLSM4
X
X
(10 25/32” x 52 33/64” x 3 11/32”)
248 x 705x 71
15
709 x 252
CLR2
(9 49/64” x 27 3/4” x 2 51/64”)
(19/32”)
(27 29/32” x 9 15/16”)
247 x 1305 x 80
15
1309 x 251
CLR4
(9 3/4” x 51 3/8” x 3 5/32”)
(19/32”)
(51 17/32” x 9 7/8”)
Product
Code
CLSM2
Twin 18W Surface mounted 2ft
CLSM4
Twin 36W Surface mounted 4ft
CLR2
Twin 18W Recessed 2ft
CLR4
Twin 36W Recessed 4ft
Surface Mounted Bulkhead Lamp Fixture
•
Sanitary, rustproof, cast aluminum fixture
•
Material: Die-cast aluminium alloy, brushed finish
•
Impact and thermal shock-resistant,
tempered glass globe
•
Globe: Tempered glass
•
Socket: Porcelain body, nickel plated copper shell
Approved UL, NSF, SA
•
Lamp: Accepts 100W max Eddison screw bulb (not included)
•
Gaskets: Silicone
•
Wire leads: 15.2cm (6”) long
•
Size: Housing and globe, 14cm (5-½”) dia. x 21.6cm (8-½”) high
•
Mounting: To standard 8.9cm (3-½”) or 10.2cm (4”) junction box
•
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
OHBL01
Fixture housing
OHBL02
Globe
Web: www.oxfordhardware.co.uk
13
Gas Interlock System & Canopy Fittings
Silicone Sealant
G.I.S. & CANOPY FITTINGS
1
14
2
•
High modulus acetoxy cure silicone
•
Sturdy 10” gun suits 310 & 380ml
cartridges
•
All products manufactured to BS
•
Orders can be placed for less than
boxed quantities
3
Product Code
S90-1010
S90-1011FS
S90-1012FS
S90-1014
S90-1015FS
S90-1016
S90-1021FS
S90-2020
SGUN
Packaging
Ref.
1
2
2
1
2
1
2
3
6
6
Colour / Type
Clear
Clear - Food Safe
Aluminium - Food Safe
White
White - Food Safe
Black
Black - Food Safe
Standard Duct Seal
Cartridge Gun
Temperature Cartridge
Limit °C
Size (ml)
120
310
200
310
200
310
120
310
200
310
100
310
250
310
25
310
310/380
Divider Bar
Cap Strip
43 764 1449
45 763 1458
8ft Divider bar 1/16” stainless steel, 2mm gap
Oxford Hardware Limited Tel: 01295 680068
Quantity
in Box
20
20
20
20
20
20
20
25
1
S90-1010
Clear
S90-1011FS
Clear - Food Safe
S90-1012FS
Aluminium - Food Safe
S90-1014
White
S90-1015FS
White - Food Safe
S90-1016
Black
S90-1021FS
Black - Food Safe
S90-2020
Standard Duct Seal
SGUN
Cartridge Gun
8ft Cap strip 1/16”, stainless steel, 2mm gap
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
Feet & Castors
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
15
Feet & Castors
Adjustable Foot Inserts :: Zamak
•
•
Height adjustable
•
To fit 25, 30 or 40mm square tube
•
Adjustable Foot Inserts :: Plastic
Manufactured in the traditional zinc
alloy, Zamak, for extra strength
Less prone to the flange snapping
and safer to knock in to tube
FEET & CASTORS
Product Code
Material
Tube size
Square
Foot
Type
Height
(mm)
55 303 2500
55 303 2501
Zamak
Zamak, nickel plated
25
25
Flange
Flange
50-70
50-70
20
20
1.2
1.2
750
750
100
100
55 303 1000
55 303 2000
Aluminium
Aluminium or Zamak
30
30
Flange
Hexagon
64-99
64-99
35
35
1.2 or 1.5
1.2 or 1.5
1250
1250
100
100
55 303 4000
55 303 4001
55 303 4004
Zamak
Zamak, nickel plated
Zamak body, nickel
plated. SS foot
40
40
40
Hexagon
Hexagon
Flange
78-110
78-110
78-110
32
32
30
1.2 or 1.5
1.2 or 1.5
1.2 or 1.5
1500
1500
900
100
100
100
55 303 2500
25mm Insert
55 303 2501
25mm Insert,
nickel plated
•
Max Vertical Load: 100kg
•
Material: Polypropylene
•
Colour: Grey
•
Max operating temperature:
40°C
•
Fits 1.0mm or 1.2mm
square tube thicknesses
Total For tube Vertical Box
Adj. thicknesses load Qty
(mm)
(mm)
(kg)
E.3030.PPG
E.4040.PPG
30mm Insert, polypropylene
40mm Insert, polypropylene
End Caps
55 303 1000
30mm Insert,
flange
•
Black Plastic
•
Square
P20SQ
End cap, 20mm
(25/32”), tube
thickness 1.0 - 1.5mm
P25SQ
End cap, 25mm
(63/64”), tube
thickness 1.4 - 2.0mm
P30SQ
End cap, 30mm
(1 3/16”), tube
thickness 1.0 - 2.0mm
P40SQ
End cap, 40mm
(1 37/64”), tube
thickness 1.5 - 3.2mm
•
Black Plastic
•
Round
30mm Insert,
bullet/hex
55 303 4000
55 303 4001
40mm Insert,
bullet/hex
40mm Insert,
bullet/hex,
nickel plated
P13RD
End cap, 16mm (5/8”)
tube thickness
0.8 - 2.5mm
P20RD
End cap, 20mm
(25/32”)
tube thickness
1.0 - 1.6mm
P25RD
End cap, 25mm
(63/64”)
tube thickness
1.4 - 2.0mm
P30-32RD End cap,
30-32mm (1 3/16”)
tube thickness
1.4 - 1.8mm
55 303 4004
40mm Insert, flange, nickel
plated, stainless steel foot
16
Oxford Hardware Limited Tel: 01295 680068
P38RD
End cap, 38mm
(1 1/2”)
tube thickness
1.4 - 2.0mm
Fax: 01295 688123 Email: [email protected]
Rectangular
End cap,
40 x 20mm
(1 37/64” x 25/32”)
tube thickness
1.5 - 2.0mm
P5025REC
End cap,
50 x 25mm
(1 31/32” x 63/64”)
tube thickness
1.2 - 1.5mm
P5030REC
End cap,
50 x 30mm
(1 31/32” x 1 3/16”)
tube thickness
1.5 - 2.5mm
End cap, 13mm
(33/64”)
tube thickness
0.8 - 2.5mm
P16RD
Black Plastic
•
P4020REC
•
55 303 2000
•
Black Plastic,
chrome plated
•
Round
•
Internal use only
P25RDCP
End cap, plastic,
chrome plated,
25mm (63/64”),
tube thickness
1.4 - 2.0mm
P32RDCP
End cap, plastic,
chrome plated,
32mm (1 17/64”),
tube thickness
1.4 - 2.0mm
P38RDCP
End cap, plastic,
chrome plated,
38mm (1 1/2”),
tube thickness
1.4 - 2.0mm
P50RDCP
End cap, plastic,
chrome plated,
50mm (1 31/32”),
tube thickness
1.4 - 2.0mm
Web: www.oxfordhardware.co.uk
Feet & Castors
Stainless Steel Levelling Feet :: Round Foot
Stainless Steel Levelling Feet :: Octagonal Foot
•
Height: State minimum and maximum required
•
Height: State minimum and maximum required
•
Please note: Minimum order is 200 Pieces
•
Please note: Minimum order is 200 Pieces
P50-11 Ø1½”
P50-12 Ø1½”
P50-13 Ø1½”
P52-10 Ø1½”
P52-11 Ø1½”
P52-12 Ø1½”
P52-13 Ø1½”
P51-11 Ø2”
P51-12 Ø2”
P51-13 Ø2”
P53-10 Ø2”
P53-11 Ø2”
P53-12 Ø2”
P53-13 Ø2”
P50-14 Ø1½”
P50-15 Ø1½”
P50-16 Ø1½”
P50-17 Ø1½”
P52-14 Ø1½”
P52-15 Ø1½”
P52-16 Ø1½”
P52-17 Ø1½”
P51-14 Ø2”
P51-15 Ø2”
P51-16 Ø2”
P51-17 Ø2”
P53-14 Ø2”
P53-15 Ø2”
P53-16 Ø2”
P53-17 Ø2”
FEET & CASTORS
P50-10 Ø1½”
P51-10 Ø2”
Stainless Steel Levelling Feet :: Flanged Foot
•
Height: State minimum and maximum required
•
Please note: Minimum order is 200 Pieces
Adjustable Feet :: Threaded Insert
P54-10 Ø1½”
P54-11 Ø1½”
P54-12 Ø1½”
P54-13 Ø1½”
P55-10 Ø2”
P55-11 Ø2”
P55-12 Ø2”
P55-13 Ø2”
•
Max Vertical Load: 400kg
•
Thread Length: 40mm (1 37/64”)
•
Base Diameter: 38mm (1 1/2”)
•
Overall Height: 55mm (2 11/64”)
AFM8
Non-tilt, adjustable foot, M8 thread
AFM10
Non-tilt, adjustable foot, M10 thread
•
Max Vertical Load: 100kg
•
Thread Length: 25mm (63/64”)
•
Base Diameter: 40mm (1 37/64”)
AFM8TG
P54-14 Ø1½”
P54-15 Ø1½”
P54-16 Ø1½”
P54-17 Ø1½”
P55-14 Ø2”
P55-15 Ø2”
P55-16 Ø2”
P55-17 Ø2”
Threaded Inserts
Kickplate Holder
•
Tilt Glide, adjustable foot, M8 thread
Suits 32mm (1 ¼”) to 50mm (2”) round tube
41 176 4460
Kick plate holder, zinc plated
Oxford Hardware Limited Tel: 01295 680068
P25SQTI
Threaded insert, black, M8, 25 square
P30SQTI
Threaded insert, black, M8, 30 square
P40SQTI
Threaded insert, black, M10, 40 square
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
17
Feet & Castors
2” (50mm) Castors :: Standard Catering
Fig.
1
2
1
2
Castor
Wheel
Wheel
Type
Diameter
Material
2” (50mm) SQUARE PLATE UNBRAKED
Swivel
50
Black Nylon
2” (50mm) SQUARE PLATE BRAKED
Swivel
50
Black Nylon
Tread
Width
Effective
Height
Swivel
Radius
Plate
Size
Hole
Centres
Load
Capacity
Product
Code
18
68
50
60x60
48/38x48/38
50
50NUBP
18
68
80
60x60
48/38x48/38
50
50NBP
Swivel
Radius
Plate
Size
Hole
Centres
Load
Capacity
Product
Code
47
-
-
70
75GRUBEX25
47
-
-
70
75GRBEX25
47
47
-
-
70
70
75NUBEX
75GRUBEX
65
65
-
-
70
70
75NBEX
75GRBEX
60
60
105x80
60x60
80/86x60
48/38x48/38
120
70
1352020
75GRUBP
60
60
105x80
60x60
80/86x60
48/38x48/38
120
70
1352760
75GRBP
Plate
Size
Hole
Centres
Load
Capacity
Product
Code
-
-
150
85
100NUBEX
100GRUBEX
-
-
150
85
100NBEX
100GRBEX
-
-
80
80
100NUBEXADJ
100GRUBEXADJ
-
-
80
80
100NBEXADJ
100GRBEXADJ
76x76
76x76
57x57
57x57
150
80
100NUBP57
100GRUBP57
76x76
76x76
57x57
57x57
150
80
100NBP57
100GRBP57
100x80
105x85
76/80x44.5/60
80/77x60
150
70
1321720
100GRUBP
100x80
105x85
76/80x44.5/60
80/77x60
150
70
1322720
100GRBP
105x85
105x85
76/80x44.5/60
76/80x44.5/60
150
85
1321950
1321970
-
-
80
100GRUBEX25SQ
-
-
80
100GRBEX25SQ
-
-
80
100GRUBEX25RD
-
-
80
100GRBEX25RD
3” (75mm) Castors :: Standard Catering
FEET & CASTORS
Castor
Wheel
Wheel
Tread Effective
Type
Diameter
Material
Width Height
3” (75mm) WITH EXPANDER FOR 25mm SQUARE TUBE UNBRAKED
1
Swivel
75
Grey Rubber
23
95
3” (75mm) WITH EXPANDER FOR 25mm SQUARE TUBE BRAKED
2
Swivel
75
Grey Rubber
23
95
3” (75mm) WITH EXPANDER FOR 30mm SQUARE TUBE UNBRAKED
3
Swivel
75
Black Nylon
23
95
4
Swivel
75
Grey Rubber/Nylon 23
95
3” (75mm) WITH EXPANDER FOR 30mm SQUARE TUBE BRAKED
5
Swivel
75
Black Nylon
23
95
6
Swivel
75
Grey Rubber/Nylon 23
95
3” (75mm) WITH PLATE UNBRAKED
7
Swivel
75
White Nylon
25
94
8
Swivel
75
Grey Rubber/Nylon 23
97
3” (75mm) WITH PLATE BRAKED
9
Swivel
75
White Nylon
25
94
10
Swivel
75
Grey Rubber/Nylon 23
97
Fig.
1
3
7
2
4
8
5
9
6
10
4” (100mm) Castors :: Standard Catering
Fig.
1
2
3
4
1
2
3
4
5
6
5
9
6
10
7
11
8
12
7
8
9
10
11
12
13
14
15
16
13
14
15
16
17
18
17
18
19
20
19
20
21
21
18
22
Oxford Hardware Limited Tel: 01295 680068
22
Castor
Wheel
Wheel
Tread Effective Swivel
Type
Diameter
Material
Width Height Radius
4” (100mm) WITH EXPANDER FOR 30mm SQUARE TUBE UNBRAKED
Swivel
100
White Nylon
32
128
82
Swivel
100
Grey Rubber/Nylon 30
128
82
4” (100mm) WITH EXPANDER FOR 30mm SQUARE TUBE BRAKED
Swivel
100
White Nylon
32
128
125
Swivel
100
Grey Rubber/Nylon 30
128
125
4” (100mm) WITH EXPANDER FOR 30mm SQUARE TUBE UNBRAKED ADJUSTABLE
Swivel
100
White Nylon
27
130
82
Swivel
100
Grey Rubber/Nylon 27
130
82
4” (100mm) WITH EXPANDER FOR 30mm SQUARE TUBE BRAKED ADJUSTABLE
Swivel
100
White Nylon
27
130
125
Swivel
100
Grey Rubber/Nylon 27
130
125
4” (100mm) WITH SQUARE PLATE 57X57 UNBRAKED
Swivel
100
White nylon
27
132
82
Swivel
100
Grey Rubber/Nylon 27
132
82
4” (100mm) WITH SQUARE PLATE 57X57 BRAKED
Swivel
100
White Nylon
27
132
86
Swivel
100
Grey Rubber/Nylon 27
132
86
4” (100mm) WITH PLATE UNBRAKED
Swivel
100
White Nylon
32
128
82
Swivel
100
Grey Rubber/Nylon 30
128
91
4” (100mm) WITH PLATE BRAKED
Swivel
100
White Nylon
32
128
82
Swivel
100
Grey Rubber/Nylon 30
128
125
4” (100mm) WITH PLATE UNBRAKED FIXED
Fixed
100
White Nylon
32
128
Fixed
100
Grey Rubber/Nylon 30
128
4” (100mm) WITH EXPANDER FOR 25mm SQUARE TUBE UNBRAKED
Swivel
100
Grey Rubber/Nylon 27
130
82
4” (100mm) WITH EXPANDER FOR 25mm SQUARE TUBE BRAKED
Swivel
100
Grey Rubber/Nylon 27
130
86
4” (100mm) WITH EXPANDER FOR 25mm ROUND TUBE UNBRAKED
Swivel
100
Grey Rubber/Nylon 27
130
82
4” (100mm) WITH EXPANDER FOR 25mm ROUND TUBE BRAKED
Swivel
100
Grey Rubber/Nylon 27
130
86
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
Feet & Castors
5” (125mm) Castors :: Standard Catering
1
2
3
4
5
9
6
10
7
8
11
Stainless Steel
::
Plate
Size
Hole
Centres
Load
Capacity
Product
Code
-
-
100
100
125NUBEX
125GRUBEX
-
-
100
100
125NBEX
125GRBEX
100x80
100x80
76/80x44.5/60
76/80x44.5/60
150
85
1321010
1321030
100x80
100x80
76/80x44.5/60
76/80x44.5/60
150
85
1322010
1322030
105x85
105x85
76/80x44.5/60
76/80x44.5/60
150
85
1321430
1321450
BUF 115530
FEET & CASTORS
Castor
Wheel
Wheel
Tread Effective Swivel
Type
Diameter
Material
Width Height Radius
5” (125mm) WITH EXPANDER FOR 30mm SQUARE TUBE UNBRAKED
1
Swivel
125
White Nylon
32
152
110
2
Swivel
125
Grey Rubber/Nylon 30
152
110
5” (125mm) WITH EXPANDER FOR 30mm SQUARE TUBE BRAKED
3
Swivel
125
White Nylon
32
152
110
4
Swivel
125
Grey Rubber/Nylon 30
152
110
5” (125mm) WITH PLATE UNBRAKED
5
Swivel
125
White Nylon
32
152
110
6
Swivel
125
Grey Rubber/Nylon 30
152
110
5” (125mm) WITH PLATE BRAKED
7
Swivel
125
White Nylon
32
152
110
8
Swivel
125
Grey Rubber/Nylon 30
152
110
5” (125mm) WITH PLATE UNBRAKED FIXED
9
Fixed
125
White Nylon
32
152
10
Fixed
125
Grey Rubber/Nylon 30
152
11 BUMPER, ROTATING FOR 30mm SQUARE TUBE
Fig
Stainless Steel
4” (100mm) Castors :: Stainless Steel Catering
Fig
1
2
3
4
1
2
3
4
Castor
Wheel
Wheel
Tread
Type
Diameter
Material
Width
4” (100mm) WITH PLATE UNBRAKED
Swivel
100
White Nylon
30
Swivel
100
Grey Rubber/Nylon 30
4” (100mm) WITH PLATE BRAKED
Swivel
100
White Nylon
30
Swivel
100
Grey Rubber/Nylon 30
Stainless Steel
::
Effective
Height
Swivel
Radius
Plate
Size
Hole
Centres
Load
Capacity
Product
Code
128
128
87
87
102x83
102x83
80x60
80x60
150
85
17130
15308G
128
128
87
87
102x83
102x83
80x60
80x60
150
85
17130FR
15308GFR
Stainless Steel
5” (125mm) Castors :: Stainless Steel Catering
Fig
1
2
3
4
1
2
3
4
Oxford Hardware Limited Tel: 01295 680068
Castor
Wheel
Wheel
Tread
Type
Diameter
Material
Width
5” (125mm) WITH PLATE UNBRAKED
Swivel
125
White Nylon
30
Swivel
125
Grey Rubber/Nylon 37.5
5” (125mm) WITH PLATE BRAKED
Swivel
125
White Nylon
30
Swivel
125
Grey Rubber/Nylon 37.5
Effective
Height
Swivel
Radius
Plate
Size
Hole
Centres
Load
Capacity
Product
Code
154
154
102.5
102.5
102x83
102x83
80x60
80x60
150
110
17131
15312G
154
154
102.5
102.5
102x83
102x83
80x60
80x60
150
110
17131FR
15312GFR
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
19
Catering
Hardware
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
21
Catering Hardware
Flush Door Pulls :: Stainless Steel
41 762 1010
D Handles
41 762 1014
41 760 1010
Heavy duty, polished chrome plated, 178mm (7”) hole
centres
41 746 1012
Satin finish, stainless steel, 102mm (4”) hole centres
41 750 1010
Polished, chrome plated, zinc, 102mm (4”) hole centres
41 740 1010
Offset, polished, chrome plated, zinc, 127mm (5”) hole
centres
19 1 3424
Polished, stainless steel, 110mm (4 21/64”) hole centres
Door pull, frame bevelled edge, stud type 3/16-24 male
CATERING HARDWARE
41 763 1012
5001SP0004
Drawer pull, full grip, frame bevelled edge, stud type
3/16-24 male
Door pull, flush type for welding
Drawer pull, round, stud type 3/16-24 male
Flush Door Pulls :: Plastic
46 765 1050
22
46 2248
Black thermoplastic (-40°C to +130°C), 117mm (4 39/64”)
hole centres M8 Thread
46 2232
Black plastic handle max 70°C, 117mm (4 39/64”) hole
centres, M5 Thread
Drawer pull, full grip, push fit, black polypropylene
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
Catering Hardware
Decorator Handles
Paddle Latches
•
Made in 304 grade stainless steel
•
Heavy duty slide and locking cam
•
Mirror finish on case and flap
Slam action against
door frame, released
by lifting flap
Decorator handle, 178mm (7”) K Line, heat resistant,
aluminium, nylon bases, hole centres 153mm (6 1/32”)
45 749 1508
Decorator handle, 305mm (12”) K Line, heat resistant,
aluminium, nylon bases, hole centres 270mm (10 5/8”)
Front mounted
•
Overall
Dimensions:
140 x 89mm
(5 33/64”) x
(3 1/2”)
CATERING HARDWARE
45 749 1506
•
0912/401
Non-Locking Paddle Handle
0912/411
Locking Paddle Handle
Knobs
•
45 780 3020
(Small)
45 780 3000
(Medium)
Complete with threaded bolt 8-32
45 780 3031
(Large)
45 780 3020
Knob (small) 16mm (5/8”), solid brass, chrome plated,
4mm fixing thread
45 780 3000
Knob (medium) 22mm (7/8”), solid brass, chrome plated
45 780 3031
Knob (large) 28mm (1 1/32”), solid brass, chrome plated
Catches :: Shoot bolts
46 760 1010
Shoot bolt, chrome plated
Oxford Hardware Limited Tel: 01295 680068
16 7 3863
Shoot bolt, stainless steel
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
23
Catering Hardware
Catches :: Magnetic
Catches :: Friction / Ball
41 730 2400
41 721 2580
Cabinet catch, friction type with sprung nylon rollers,
zinc plated
41 730 5920
41 730 2400
12lbs pull, concealed magnet, zinc plated
41 730 5920
20lbs pull, concealed magnets, zinc plated
CATERING HARDWARE
41 732 2401
45 736 0611
45 736 0201
41 722 2410
Ball catch,
nickel plated
(small)
41 722 2420
Ball catch,
nickel plated
(medium)
41 722 2430
Ball catch,
nickel plated
(large)
30lbs pull, concealed magnets, zinc plated
Snap in, 13lbs pull, black polypropylene
Snap in, 20lbs pull, black polypropylene
Counter Flap Catches
ATBRMC50B
40 065 6 31
24
Two way, black plastic (push to open, push to close)
Oxford Hardware Limited Tel: 01295 680068
ATBRMC50CP
ATBRMC50B
Counter flap catch with keep, brass
ATBRMC50CP
Counter flap catch with keep, brass, chrome plated
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
Catering Hardware
Edgemount Lock
Through Door Locks
•
Four disc cylinder
Lock for all types of cabinets
•
Installs in field or factory
•
Material: Zamak
•
Vertical and horizontal adjustments
•
Finish: Chrome plated
•
Compatible with glass doors
•
For left and right handed doors
•
Black plastic caps included
•
Keyed alike
•
Material: Chrome plated Zamak body with
stainless steel faced cylinder
D101-1-(235)
CATERING HARDWARE
Lock for small offsets with 6mm keep
0100SL0000
Security Lock, Strike Height: 20mm (25/32”)
Keeps for Edgemount and Through Door Locks
•
Material: Zamak
•
Finish: Chrome plated
•
For left and right handed doors or
drawers
D102-1-(235)
D100-1-6
D100-1-20
Product Code
Dim A
Dim B
D100-1-26 15mm (19/32”) 26mm (1 1/32”)
D100-1-20 19mm (25/32”) 20mm (25/32”)
D100-1-12 20mm (25/32”) 12mm (15/32”)
D100-1-6
19mm (3/4”) 6mm (15/64”)
Fixing Holes
Counterbored - 5mm (13/64”) - 8mm (5/16”)
Counterbored - Slotted 5mm (13/64”) x 6.5 (1/4“) - 8mm (5/16”)
Counterbored - 4mm (13/64”) - 8mm (5/16”)
Countersunk - 4.5mm (11/64”) - 8mm (5/16”)
D100-1-26
26mm keep
D100-1-20
20mm keep
D100-1-12
12mm keep
D100-1-6
6mm keep (for D102-1 lock)
Utility Locks
•
Finish: Chrome plated
Locks
45 730 4760
45 720 0490
45 710 0370
Plunger lock,
chrome plated
Drawer lock, chrome plated
Oxford Hardware Limited Tel: 01295 680068
45 730 4740
Utility lock, 16 mm (5/8”), keyed alike
45 730 4742
Utility lock, 16mm (5/8”), keyed to differ/master key
45 730 4750
Utility lock, 22mm (7/8”), keyed alike
45 730 4752
Utility lock, 22mm (7/8”), keyed to differ/master key
45 730 4760
Utility lock, 27mm (1 1/16”), keyed alike
45 730 4762
Utility lock, 27mm (1 1/16”), keyed to differ/master key
45 730 4765
Utility lock, 32mm (1 ¼”), keyed alike
45 730 4767
Utility lock, 32mm (1 ¼”), keyed to differ/master key
45 730 3000
Master key (keyed to differ)
92 400
Spare key (keyed alike)
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
25
Catering Hardware
Hinges :: Flag
45 775 1002
Hinges
Flag hinge (small), non-handed, 54mm x 22.2mm
(2 1/8” x 7/8”), stainless steel
41 748 0144
CATERING HARDWARE
45 775 5003
Flag hinge (large), non-handed, 79.4mm x 28.4mm
(3 1/8” x 1 5/32”), stainless steel
Hinges :: Butt
45 774 2078
7035
Butt hinge (small), 50.8mm x 50.8mm (2” x 2”) open,
stainless steel
Product Code
41 748 0112
41 748 0117
41 748 0131
41 748 0134
41 748 0144
Open width (A)
19.1mm (3/4”)
25.4mm (1”)
38.1mm (1 1/2”)
38.1mm (1 1/2”)
50.8mm (2”)
PinØ (C)
2.34mm (0.092”)
2.34mm (0.092”)
2.34mm (0.092”)
3.25mm (0.128”)
3.25mm (0.128”)
Knuckle
6.5mm (1/4”)
6.5mm (1/4”)
6.5mm (1/4”)
12.7mm (1/2”)
12.7mm (1/2”)
19.1mm (¾”) Continuous (piano) hinge, 20 gauge
41 748 0117
25.4mm (1”) Continuous (piano) hinge, 20 gauge
41 748 0131
38.1mm (1 ½”) Continuous (piano) hinge, 20 gauge
41 748 0134
38.1mm (1 ½”) Continuous (piano) hinge, 16 gauge
41 748 0144
50.8mm (2”) Continuous (piano) hinge, 16 gauge
Block Hinge
A
B
C
D
E
F
G
H
Butt hinge (medium) 63 x 37mm (2 1/2” x 1 1/2”), stainless steel polished
45 774 3078
Gauge (B)
0.91mm (0.036”)
0.91mm (0.036”)
0.91mm (0.036”)
1.63mm (0.064”)
1.63mm (0.064”)
41 748 0112
1/26915
26
Length
1829.8mm (72”)
1829.8mm (72”)
1829.8mm (72”)
1829.8mm (72”)
1829.8mm (72”)
Length (half)
Width
Height
Height to pin
Location
Location
Pin diameter
Hole size
38mm (1 1/2”)
17mm (43/64”)
19mm (3/4”)
11mm (7/16”)
19mm (3/4”)
9mm (23/64”)
6mm (15/64”)
M6 x 7.5mm
(15/64” x 19/64”)
Block hinge, lift-off, chrome plated, 76mm (3”)
Butt hinge (large), 76.2mm x 76.2mm (3” x 3”) open,
stainless steel
Divider Bar
Cap Strip
43 764 1449
45 763 1458
8ft Divider bar 1/16” stainless
steel, 2mm gap
8ft Cap strip 1/16”, stainless
steel, 2mm gap
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
Catering Hardware
DS Drawer Slides :: Zinc Plated :: 100% Extension :: Economy Range
250mm Drawer slides (10”)
DS 12
300mm Drawer slides (12”)
DS 14
350mm Drawer slides (14”)
DS 16
400mm Drawer slides (16”)
DS 18
450mm Drawer slides (18”)
DS 20
500mm Drawer slides (20”)
DS 22
550mm Drawer slides (22”)
DS 24
600mm Drawer slides (24”)
Full extension, 3 part slide
•
•
Full telescopic action
•
Detent in
•
Side mounted
•
32mm system hole pattern
•
Non-handed
•
Finish: Zinc plated steel
•
Adjustable side space tabs
•
Average load capacity: 45kg
(100lbs)
Trigger disconnect
Product Side
Side
D
E
M
N
O
P
Q
R
I
J
Code Length A Length B (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
DS 10
DS 12
DS 14
DS 16
DS 18
DS 20
DS 22
DS 24
250
300
350
400
450
500
550
600
250
300
350
400
450
500
550
600
160
208
256
288
288
288
288
320
352
416
416
480
259
259
259
259
259
259
227
259
355
-
387
387
387
483
-
515
-
579
163
203
112
132
157
182
212
222
142
171
196
221
242
281
CATERING HARDWARE
DS 10
•
Accuride Drawer Slides :: Zinc Plated :: 100% Extension :: Premier Range
DZ8832-B0030
•
Full extension, 3 part slide
•
Mild steel, zinc plated construction
•
Drawer member disconnects by rotating lever
•
Stay closed feature
•
Tolerance absorption tabs
NOTES
DZ 3832-B0025
250mm Drawer slides (10”)
DZ 3832-B0030
300mm Drawer slides (12”)
DZ 3832-B0035
350mm Drawer slides (14”)
DZ 3832-B0040
400mm Drawer slides (16”)
DZ 3832-B0045
450mm Drawer slides (18”)
DZ 3832-B0050
500mm Drawer slides (20”)
DZ 3832-B0055
550mm Drawer slides (22”)
DZ 3832-B0060
600mm Drawer slides (24”)
DZ 3832-B0065
650mm Drawer slides (26”)
DZ 3832-B0070
700mm Drawer slides (28”)
Oxford Hardware Limited Tel: 01295 680068
•
Dimensions in millimetres
•
All fixing positions must be used to achieve maximum load rating
•
It may be possible to manufacture alternative lengths to order
Product Code
SL
TR
A
B
C
D
E
F
G
H
I
J
DZ3832-B0025
DZ3832-B0030
DZ3832-B0035
DZ3832-B0040
DZ3832-B0045
DZ3832-B0050
DZ3832-B0055
DZ3832-B0060
DZ3832-B0065
DZ3832-B0070
250
300
350
400
450
500
550
600
650
700
243
305
356
406
457
508
559
610
660
711
96.0
96.0
128
128
128
128
128
128
128
128
224
224
224
288
320
320
320
416
416
416
416
544
544
192
242
292
342
392
442
492
542
592
642
11
11
11
11
11
11
11
11
11
224
224
224
224
224
224
224
224
224
320
352
416
352
352
352
352
448
480
544
544
Fax: 01295 688123 Email: [email protected]
kg / Pair
kg / Pair
Slide Weight Load Rating
kg
0.79
23
0.95
27
1.10
34
1.27
45
1.42
45
1.58
45
1.75
45
1.91
39
2.06
32
2.22
27
Web: www.oxfordhardware.co.uk
27
Catering Hardware
Self-close Drawer Slides
•
32kg (75lb) Load Rating
•
Full extension
•
Side mounted
•
Soft close
•
Adjustment of drawer front
•
32mm system hole pattern
•
Zinc finish
•
No external handles required on
drawer
CATERING HARDWARE
28
Product Code
Length
L
Travel
L1
CC44-400
CC44-450
CC44-500
400
450
500
419
469
450
Oxford Hardware Limited Tel: 01295 680068
C44-400
Self-close Drawer Slide - 400mm (16”)
C44-450
Self-close Drawer Slide - 450mm (18”)
C44-500
Self-close Drawer Slide - 500mm (20”)
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
Catering Hardware
Accuride Drawer Slides :: With Mount Brackets :: Stainless Steel
•
Full extension, 3 part slide
•
Load rating up to 120kg
•
100%+ extension
•
20.7mm slide thickness
•
Hold-in
•
Includes easy mount brackets with locator pins
CATERING HARDWARE
DS5322-0030-2
DS5322-0035-2
DS5322-0040-2
DS5322-0045-2
DS5322-0050-2
DS5322-0055-2
DS5322-0060-2
DS5322-0070-2
DS5322-0080-2
SL
300
350
400
450
500
550
600
700
790
TR
342
392
442
492
542
592
642
742
822
A
160
192
192
224
256
320
352
B
192
224
224
256
288
352
384
mm
C
192
256
288
352
384
448
480
608
672
D
224
288
320
384
416
480
512
640
704
E
177
227
277
327
377
427
477
577
677
DS 5322-0030-2
300mm Drawerslide (12”)
DS 5322-0055-2
550mm Drawerslide (22”)
DS 5322-0035-2
350mm Drawerslide (14”)
DS 5322-0060-2
600mm Drawerslide (24”)
DS 5322-0040-2
400mm Drawerslide (16”)
DS 5322-0070-2
700mm Drawerslide (28”)
DS 5322-0045-2
450mm Drawerslide (18”)
DS 5322-0080-2
790mm Drawerslide (32”)
DS 5322-0050-2
500mm Drawerslide (20”)
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
G
238.5
288.5
338.5
W
1.90
2.15
2.40
2.66
2.98
3.28
3.58
4.20
4.80
Web: www.oxfordhardware.co.uk
kg
L
80
90
100
110
120
110
100
70
50
29
Catering Hardware
Undercounter Drawers :: With and Without Lock
TD02
TD15
TD25
CATERING HARDWARE
TD01
Showing Lock
Position on
TD02L
•
Complete Undercounter Drawer
•
1/1 S/S gastronorm pan 100/150mm
(3 15/16” / 5 29/32”) deep included
•
D handle, polished chrome plate or S/S
flush pull in 304 S/S drawer front
•
Extra thick construction minimises
movement and subsequent jamming
•
Allows easy assembly of sets of drawers
TD01
Undercounter drawer, D handle, 100mm (3 15/16”) pan depth
TD02
Undercounter drawer, s/s flush pull, 100mm (3 15/16”) pan depth
TD02L
Undercounter drawer, s/s flush pull, 100mm (3 15/16”) pan depth,
Lockable, Keyed alike
TD15
Undercounter drawer, D handle, 150mm (5 29/32”) pan depth
TD25
Undercounter drawer, s/s flush pull, 150mm (5 29/32”) pan depth
TD25L
Undercounter drawer, s/s flush pull, 150mm (5 29/32”) pan depth,
Lockable, Keyed alike
6000 Series Drawer Slides :: Stainless Steel
30
Oxford Hardware Limited Tel: 01295 680068
•
Full extension, 3 part slide
•
•
Width 14mm, height 65mm
•
Drawer removable
•
Easy to install
•
Maximum operating temperature 150ºC
•
Manufactured from 18/10 304 Stainless Steel
Product
Code
Length
(mm)
P6000/400
P6000/450
P6000/500
P6000
P6005
P6010
P6015
P6020
400
450
500
555
600
700
800
900
Length
(approx. in
inches)
16”
18”
20”
22”
24”
28”
32”
36”
4 Teflon bearings per slide
Travel
(mm)
Total
(mm)
Rating
kg.
P6000/400
400mm Drawer slides (16”)
P6000/450
450mm Drawer slides (18”)
405
455
505
560
500
600
700
800
805
905
1005
1150
1100
1300
1500
1700
60
60
60
60
55
50
40
35
P6000/500
500mm Drawer slides (20”)
P6000
555mm Drawer slides (22”)
P6005
600mm Drawer slides (24”)
P6010
700mm Drawer slides (28”)
P6015
800mm Drawer slides (32”)
P6020
900mm Drawer slides (36”)
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
Catering Hardware
Slide Drop Brackets
41 619 4960
Tray slide bracket, 3-rail, stainless steel, satin finish
41 617 4270
Flat bracket,
Mount: 14 GA
zinc plated steel
41 619 4955
Fold down tray slide bracket, 3-rail,
stainless steel, satin finish
45 719 4967
Flat bracket, fold down, stainless steel
CATERING HARDWARE
Tray Slide Brackets
1” OD Tube Accessories
•
45 713 4488
•
U Bend
•
Brushed stainless steel
•
45 716 0201
•
End Cap
•
Polished nickel plated
Domed Stud For Tray Slides
45 713 4488
U Bend for 25 4mm (1”) OD Tube, brushed stainless steel
45 716 0201
End cap for 25.4mm (1”) OD Tube, polished nickel plated
Oxford Hardware Limited Tel: 01295 680068
SS.STUD
Domed stud for tray slides, stainless steel, 19mm Ø
Stud depth 5mm, Stud dia 5mm
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
31
Catering Hardware
Wall Shelves :: Stainless Steel
Sliding Door Track
•
Sturdy, with width
adjustable wall
brackets for easy
installation
•
Easy to clean
•
40 757 0072
1828.8mm (72”) length
40 757 2000
2m (78 47/64”) length
40 757 3000
3m (118 7/64”) length
Extruded aluminium
CATERING HARDWARE
Door Sheaves :: Steel Roller
BSX-S3-600
Wall Shelf, Stainless Steel, 600 x 300mm
BSX-S3-900
Wall Shelf, Stainless Steel, 900 x 300mm
BSX-S3-1200
Wall Shelf, Stainless Steel, 1200 x 300mm
BSX-S3-1500
Wall Shelf, Stainless Steel, 1500 x 300mm
BSX-S3-1800
Wall Shelf, Stainless Steel, 1800 x 300mm
BSX-S3-2000
Wall Shelf, Stainless Steel, 2000 x 300mm
BSX-S5-600
Microwave Shelf, Stainless Steel, 600 x 500mm
mm (¾”) Side
ted door hanger
41 758 5511
Front door sheave, steel roller
41 758 5521
Rear door sheave, steel roller
•
Zinc plated steel
•
Steel rollers
•
Steel ball bearing
Door Sheaves :: Nylon Roller
mm (¾”) Side
ted door hanger
Sliding Door Track Accessory :: Door Guide
40 762 1093
Door guide for
19.1mm (¾”)
doors, nylon
40 758 5513
Front door sheave, nylon roller
40 758 5523
Rear door sheave, nylon roller
•
Zinc plated steel
•
Nylon rollers
•
Steel inner races
and ball bearing
Sliding Door Track Accessory :: Door Stop
Sliding Door Track Accessory :: Pin Guide
40 760 1086
32
Rubber stop for
sliding doors
Oxford Hardware Limited Tel: 01295 680068
40 756 1096
Guide pin,
stainless steel
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
Catering Hardware
Scrap Ring
Scrap Blocks
•
Durable rubber
•
Wide aperture
•
Low profile
•
Easy to keep clean
TAM.236.165 PLN
CATERING HARDWARE
Black scrap ring
Scrap Chute
45 792 1000
45 792 9360
45 792 5000
Solid rubber, cylinder
for 146mm (5 3/4”) Ø opening
Solid rubber, funnel
for 146mm (5 3/4”) Ø opening
Stainless steel, cyclinder for 178mm (7”) Ø opening
Plastic Accessories :: Round Tube Connector
Corner Bumper
•
Material: Polyamide
•
Colour: Black
•
Saves on manufacturing cost
•
Lerpac approved
SDT.30.PN
SDT.25.PN
For outer tube diameter 25mm
SDT.30.PN
For outer tube diameter 30mm
SDT.38.PN
For outer tube diameter 38mm
41 260 1030
Plastic Accessories :: Right Angle Connector
Strip Bumper
•
Material: Grey rubber
•
Supplied in 100 foot
coils or by the foot
41 260 5010
Oxford Hardware Limited Tel: 01295 680068
SDT.3838.PN
•
For connecting two round
tubes at right angles
•
Material: Polyamide
•
Colour: Black
•
Saves on manufacturing cost
•
Lerpac approved
For outer tube diameter 38-38mm
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
33
Catering Hardware
Dormont Gas Hoses
Most Flexible, Long-Lasting Hose in the World with Unique Design Features
•
Exclusive push-to-connect and quick disconnect for one-handed operation
•
Comes standard with straight restraining cable
•
360° axial rotation
•
Flat face coupling stops ingress of dirt and liquids
•
Suitable for town gas, natural gas and LPG
•
Dipped coating means no wrinkles plus heat and crack resistant
•
304 stainless steel with helical corrugation increases strength and flexibility
•
Exclusive shut-off fusible link in the event of fire
•
Anti-microbial coating
•
BSI/Kitemarked
2650NPVF36
Wall end
CATERING HARDWARE
Appliance end
2650NPVF36
½” Flexible hose, quick release, restraining wire and mounting hardware, 1 metre
2650NPVF48
½” Flexible hose, quick release, restraining wire and mounting hardware, 1.2 metre
2650NPVF60
½” Flexible hose, quick release, restraining wire and mounting hardware, 1.5 metre
2675NPVF36
¾” Flexible hose, quick release, restraining wire and mounting hardware, 1 metre
2675NPVF48
¾” Flexible hose, quick release, restraining wire and mounting hardware, 1.2 metre
2675NPVF60
¾” Flexible hose, quick release, restraining wire and mounting hardware, 1.5 metre
26100NPVF36
1” Flexible hose, quick release, restraining wire and mounting hardware, 1 metre
26100NPVF48
1” Flexible hose, quick release, restraining wire and mounting hardware, 1.2 metre
26100NPVF60
1” Flexible hose, quick release, restraining wire and mounting hardware, 1.5 metre
Plastic Accessories :: Collar For Round Tube
•
Material: Polyamide
•
Colour: Black
•
Saves on manufacturing cost
•
Lerpac approved
Stainless Steel Collars
C.01.PN
Product
Code
C.01.30.PN
C.01.38.PN
C.01.40.PN
C.01.45.PN
C.01.48.PN
34
B
D
•
304 Stainless steel
•
Bevelled inner edge to allow for
welding material
•
Inside diameter of collars 0.5mm
greater than tube size for easier
installation
SSC38.10
30.1
47
(1 3/16”) (1 27/32”)
38.1
55
(1 1/2”) (2 11/64”)
40.1
57
(1 37/64”) (2 1/4”)
45.1
62
(1 25/32”) (2 7/16”)
48.1
65
(1 57/64”) (2 9/16”)
Product
Code
A
B
Ø A (mm)
Inner Diameter
33
SSC32.10
(1 19/64”)
39
SSC38.5
(1 17/32”)
39
SSC38.10
(1 17/32”)
51
SSC50.10
(2”)
B (mm)
Width
10
(25/64”)
5
(13/64”)
10
(25/64”)
10
(25/64”)
C.01.30.PN
For outer tube diameter 30mm (1 3/16”)
C.01.38.PN
For outer tube diameter 38mm (1 1/2”)
SSC32.10
Width 10mm (25/64”) for tube size 32mm (1 17/64”)
C.01.40.PN
For outer tube diameter 40mm (1 37/64”)
SSC38.5
Width 5mm (13/64”) for tube size 38mm (1 1/2”)
C.01.45.PN
For outer tube diameter 45mm (1 25/32”)
SSC38.10
Width 10mm (25/64”) for tube size 38mm (1 1/2”)
C.01.48.PN
For outer tube diameter 48mm (1 57/64”)
SSC50.10
Width 10mm (25/64”) for tube size 50mm (1 31/32”)
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
Catering Hardware
Plate Lowerators :: Unheated Adjustable
General specification:
General specification:
Incounter unheated plate dispenser. Three
adjustable guide rods mounted through
circular flange with ‘flat’ guide tops. Capacity
of approximately 55-60 plates. Multi-spring
mechanism to give easy adjustment for different
plate weights. Generally finished in 304 grade
stainless steel.
DFE incounter unheated plate dispenser with four
fixed guides. Circular flange with ‘flat’ guide top.
Capacity of approximately 55-60 round plates.
Multi-spring mechanism to give easy adjustment
for different plate weights. Generally finished in
304 grade stainless steel.
T280
T310
T245
150-220mm (5 29/32” - 8 21/32”) Plate dispenser
T280
180-260mm (7 3/32” - 10 15/64”) Plate dispenser
T310
210-290mm (8 17/64” - 11 27/64”) Plate dispenser
Plate diameter Cut-out diameter Flange diameter Depth below
(inches) (approx)
(mm)
(mm)
counter (mm)
145-160
243
254
650
01.1210.02
5½-6½
(5 45/64”-6 19/64”)
(9 9/16”)
(10”)
(25 19/32”)
160-205
288
300
650
01.1323
6½-8
(6 19/64”-8 5/64”)
(11 11/32”)
(11 13/16”)
(25 19/32”)
190-240
318
330
650
01.1333
7½-9½
(7 31/64”-9 29/64”)
(12 33/64”)
(12 63/64”)
(25 19/32”)
230-280
358
370
650
01.1343
9-11
(9 3/64”-11 1/32”)
(14 3/32”)
(14 9/16”)
(25 19/32”)
260-310
388
400
650
01.1353
10-12
(10 15/64”-12 13/64”)
(15 9/32”)
(15 6/8”)
(25 19/32”)
Product code Plate diameter (mm)
01.1210.02
145-160mm (5 45/64” - 6 19/64”) Plate dispenser
01.1323
160-205mm (6 19/64” - 8 5/64”) Plate dispenser
01.1333
190-240mm (7 31/64” - 9 29/64”) Plate dispenser
01.1343
230-280mm (9 3/64” - 11 1/32”) Plate dispenser
01.1353
260-310mm (10 15/64” - 12 13/64”) Plate dispenser
CATERING HARDWARE
Plate diameter Cut-out diameter Flange diameter Depth below
(inches) (approx)
(mm)
(mm)
counter (mm)
150-220
306
317
660
6-8½
(5 29/32-8 21/32”)
(12 3/64”)
(12 31/64”)
(25 63/64”)
180-260
342
359
660
7-10
(7 3/32”-10 15/64”)
(13 15/32”)
(14 9/64”)
(25 63/64”)
210-290
370
382
660
8-11
(8 17/64”-11 27/64”)
(14 9/16”)
(15 3/64”)
(25 63/64”)
Product code Plate diameter (mm)
T245
Plate Lowerators :: Unheated Fixed
Plate Lowerators :: Heated Adjustable
Heated In-Counter Soup Well
General specification:
Incounter heated plate dispenser. Three
adjustable guide rods mounted through
circular flange with ‘flat’ guide tops. Capacity
of approximately 55-60 plates. Multi-spring
mechanism to give easy adjustment for different
plate weights. Generally finished in 304 grade
stainless steel. Heating element of 400W, located
in base, controlled by fixed 70°C thermostat.
Fitted with rocker switch and neon protected from
ingress of moisture by a neoprene cap. Supplied
with cable and plug. Operates from
230V - 50Hz - 1PH electric supply.
Plate diameter Cut-out diameter Flange diameter Depth below
(inches) (approx)
(mm)
(mm)
counter (mm)
150-220
306
317
660
6-8½
(5 29/32”-8 21/32”)
(12 3/64”)
(12 31/64”)
(25 63/64”)
180-260
342
359
660
7-10
(7 3/32”-10 15/64”)
(13 15/32”)
(14 9/64”)
(25 63/64”)
210-290
370
382
660
8-11
(8 17/64”-11 27/64”)
(14 9/16”)
(15 3/64”)
(25 63/64”)
Product code Plate diameter (mm)
TH245
TH280
TH310
•
Heated in-counter soup well
with drain kit
•
Capacity approximately 10 ltr
•
Thermostatically controlled
by remote (up to 1.5m)
thermostat, mounted in bezel
•
Bezel cut out:
148 x 86mm
(5 53/64” x 3 25/64”)(H x W)
•
Overall in-counter
dimensions: 260 x 320mm
(10 15/64” x 12 19/32”) with
drain valve x 312mm
(12 9/32”) (H x DIA)
•
Supplied with lift out soup pot
with handles and hinged lid
with ladle notch
•
Fitted with cable and plug
•
Electric load of 400W
•
Operates from 230V 50Hz
1PH electric supply
Product
Code
08.2057
Cut-out
Flange
Diameter
Diameter
274mm
312mm
(10 25/32”)
(12 9/32”)
95.8235
95.8239
95.7002.BOX
149 x 90mm
(5 55/64” x 3 35/64”)
08.2057
Heated in-counter soup well with drain kit. Complete
with soup pot and hinged lid with ladle notch
TH245
150-220mm (5 29/32” - 8 21/32”) Plate dispenser
95.8235
Soup pot with handles
TH280
180-260mm (7 3/32” - 10 15/64”) Plate dispenser
95.8239
Hinged lid with ladle notch
TH310
210-290mm (8 17/64” - 11 27/64”) Plate dispenser
95.7002.BOX
Bezel back box
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
35
Catering Hardware
Cup Dispensers
•
NSF approved
•
Vertical cup dispensers operable to
45° angle
•
Sealed on counter with gasket
•
Easily removable. Quarter turn
releases dispenser from counter top
•
Minimal protrusion above counter
top (7mm (9/32”))
•
Collar remains locked into position
until re-adjusted
•
Collar easily adjusted with
screwdriver to fit different cup sizes
•
Top loading with various spring tensions
•
All Stainless Steel construction
(0.6mm) with satin finish
C3200CV
Other sizes and types of Lid,
Cup and Napkin Dispensers
are available
CATERING HARDWARE
Product
Code
Cup Size
C3200CV
6-12 oz
C3200CH
6-12 oz
C3200F
6-12 oz
C3400CV 12-24 oz
C3400CH 12-24 oz
C3400F
12-24 oz
C3500CV 32-46 oz
C3500CH 32-46 oz
C3500F
32-46 oz
Cup Rim - Dia. (adj)
(mm)
56-81
(2 13/64”-3 3/16”)
56-81
(2 13/64”-3 3/16”)
56-81
(2 13/64”-3 3/16”)
63-98
(2 13/64”-3 3/16”)
63-98
(2 31/64”-3 55/64”)
63-98
(2 31/64”-3 55/64”)
100-124
(3 15/16”-4 7/8”)
100-124
(3 15/16”-4 7/8”)
100-124
(3 15/16”-4 7/8”)
Counter
Hole Dia.
Needed (mm)
106
(4 11/64”)
106
(4 11/64”)
106
(4 11/64”)
119
(4 9/16”)
119
(4 9/16”)
119
(4 9/16”)
145
(5 45/64”)
145
(5 45/64”)
145
(5 45/64”)
Cup Type
Plastic or Paper
Plastic or Paper
Foam
Plastic or Paper
Plastic or Paper
Foam
Plastic or Paper
Plastic or Paper
Foam
Outer
Flange
Dia. (mm)
135
(5 5/16”)
135
(5 5/16”)
135
(5 5/16”)
150
(5 29/32”)
150
(5 29/32”)
150
(5 29/32”)
170
(6 11/16”)
170
(6 11/16”)
170
(6 11/16”)
C3200CV
6-12 oz Vertical mount
C3200CH
6-12 oz Horizontal mount
C3200F
6-12 oz Horizontal or Vertical mount
C3400CV
12-24 oz Vertical mount
C3400CH
12-24 oz Horizontal mount
C3400F
12-24 oz Horizontal or Vertical mount
C3500CV
32-46 oz Vertical mount
C3500CH
32-46 oz Horizontal mount
C3500F
32-46 oz Horizontal or Vertical mount
Overall Length
(mm)
610
(24 1/64”)
610
(24 1/64”)
610
(24 1/64”)
610
(24 1/64”)
610
(24 1/64”)
610
(24 1/64”)
610
(24 1/64”)
610
(24 1/64”)
610
(24 1/64”)
Lid Dispensers
36
Stainless steel
•
458mm (18”) long
CD00430
Lid dispenser for
4-12 oz cups
CD00431
Lid dispenser for
12-24oz cups
Counter
Outer
Overall
Hole Dia.
Flange
Length
Needed (mm) Dia. (mm)
(mm)
106mm
138mm
458mm
CD00430 4-12oz
(4 11/64”)
(5 7/16”) (18 1/32”)
116mm
138mm
458mm
CD00431 12-24oz
(4 9/16”)
(5 7/16”) (18 1/32”)
Product
Code
Other sizes and types of Lid,
Cup and Napkin Dispensers
are available
•
Cup
Size
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
Catering Hardware
Glass Clamps (6-10mm) :: For Square and Round Tube :: Chrome Plated
20 001 1 22
20 002 1 22
20 005 1 22
20 006 1 22
20 007 1 22
Open shape,
to fit square tube
Half closed,
to fit square tube
(makes pair with 20 001)
Open shape, rotatable,
to fit 33mm± round tube
Half closed,
to fit 33mm± round tube
(makes pair with 20 007)
Open shape,
to fit 33mm± round tube
(makes pair with 20 006)
•
Complete range of all hardware for glass
•
Includes clamps, brackets, connectors, hinges, handles and knobs, locks,
fittings for shower cubicles, mirror fittings, sliding glass door fittings, glass
partition panels and brackets plus numerous accessories
•
Finished in stainless steel, chrome / nickel / gold plated, matt or polished,
powder coated
Full catalogue available
Please enquire
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
CATERING HARDWARE
Hardware for Glass :: SWS Range
37
Catering Hardware
Hardware for Glass :: Architectural Ironmongery :: ANTIQUA Range
Full catalogue available
Please enquire
•
Supplementary range of glass hardware and architectural ironmongery
•
Designs in brass and stainless steel
•
Includes foot and handrail brackets, angles, end caps and ball tops, shelf supports, tubes, posts,
sneeze guards, wood designs, interior and exterior historical lighting
CATERING HARDWARE
38
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
Catering Hardware
CATERING HARDWARE
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
39
Refrigeration
Hardware
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
41
Refrigeration Hardware
Product range includes:
Priolinox :: Modular Cabinet Doors and Drawers
Full catalogue available
Please enquire
•
Single and double doors
•
Single, double and triple drawers
•
Coffee grounds knock-out drawers and hoppers
•
Wine and beer barrel cooling cabinets
•
Cash drawers and rubbish bins
•
Ice cream containers
•
Other stainless steel accessories
REFRIGERATION HARDWAREREFRIGERATION HARDWARE
3073
•
Stainless steel drawer with optional
cash divider and lock for the 1000
and 3000 series
•
Various sizes and types can be
supplied
3074
•
Stainless steel coffee grounds
drawer for the 1000 and 3000
series
•
Various sizes and types can be
supplied
3075
Example of cabinet with 3000 door,
3024 double drawers
and 3020A triple drawers
42
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
•
Stainless steel coffee grounds
hopper for the 1000 and 3000
series
•
Various sizes and types can be
supplied
Web: www.oxfordhardware.co.uk
Refrigeration Hardware
Priolinox :: Modular Cabinet Doors and Drawers
Full catalogue available
Please enquire
3020A
3075/12
9000
•
Priolinox is the original manufacturer of pre-fabricated accessories for refrigeration
•
Priolinox parts benefit from over 50 years of design impovement and experience in the field
•
All items are manufactured from 304 grade stainless steel
•
Doors and drawers come complete with handles, hinges and gasket and are fixed with only 8
screws
•
Each drawer is strengthened underneath with up to four 1.5” reinforcing bars
•
Drawers are fitted with stainless steel drawer slides as standard
•
High stock levels are always maintained at the factory. This greatly reduces lead times
•
Popular items are stocked in the U.K. by Oxford Hardware
•
Multi-purpose stainless steel
hopper for the 3000 and 5000
series
•
Various sizes and types can be
supplied
REFRIGERATION HARDWAREREFRIGERATION HARDWARE
3075/11
3075/2
3075/11R
3000/G/AT
•
Different configurations of stainless
steel drawers can be supplied for
the 1000, 3000 and 5000 series
•
Various sizes and types can be
supplied
3063
Example of cabinet with 3009 doors,
3026 double drawers
and 3028 triple drawers
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
•
Stainless steel door with sliding
support for beer canisters for the
1000, 3000 and 5000 series
•
Various sizes and types can be
supplied
Web: www.oxfordhardware.co.uk
43
Refrigeration Hardware
Pilaster & Clips
Edgemount Hinge
•
Stainless steel or aluminium
•
Material: Zamak
•
Design service for specific lengths and configurations
•
Finish: Chrome plated
•
Clips with and without raised tab for holding wire shelf
•
Offset: 14mm (35/64”)
•
Clips in stainless steel or zinc plated mild steel
•
Natural finish
•
Width 22mm (7/8”)
•
Pitch of slots 12.5mm (1/2”)
•
Mounting holes spacing 152mm (6”)
C.511F/100.ZCH
Edgemount Hinge
Pilaster :: Stainless Steel
•
Hinge
Stock Item
REFRIGERATION HARDWARE
6/8X12/6SS
1372mm (54”) Length
6/12X12/8SS
1981mm (78”) Length
•
Lengths below cut to order
•
Minimum quantities apply
6/3X12/6SS
610mm (24”) Length
6/5X12/6SS
914mm (36”) Length
6/6X12/6SS
1067mm (42”) Length
6/7X12/6SS
1219mm (48”) Length
6/9X12/6SS
1524mm (60”) Length
6/11X12/6SS
1829mm (72”) Length
•
Material: Zamak
•
Finish: Chrome plated
•
Offset: 23mm (29/32”)
•
Hot application version available
C.512F/100.ZCH
Hinge
C.512F/100.ZCH-H
Hinge
(hot app.)
Edgemount Hinge
Pilaster :: Aluminium
•
Stock Item
6/12X12/8C99
1981mm (78”) Length
•
Lengths below cut to order
•
Minimum quantities apply
44
For doors at least 31mm (1 7/32”)
thickness
•
Zamak with chrome plated finish
•
Plastic spacer for additional 10mm
(25/64”) offset
•
Quick and simple installation
610mm (24”) Length
6/5X12/6
914mm (36”) Length
6/6X12/6
1067mm (42”) Length
C.512/100.ZCH
Hinge
6/7X12/6
1219mm (48”) Length
CL.512/100.PN10
6/9X12/6
1524mm (60”) Length
10mm
Spacer
6/11X12/6
1829mm (72”) Length
Edgemount Hinge :: Black Polyamide
89SS
88SS
Pilaster clip
89SS
Pilaster clip, raised tab
Clips for Pilaster :: Steel, Zinc Plated
88ZP
For left or right handed doors
•
6/3X12/6
Clips for Pilaster :: Stainless Steel
88SS
•
89ZP
88ZP
Pilaster clip
89ZP
Pilaster clip, raised tab
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
•
For left or right handed doors
•
For doors at least 31mm (1 7/32”)
thickness
•
Black Polyamide
•
Plastic spacer for additional 10mm
(25/64”) offset
•
Quick and simple installation
C.512.PN
Hinge
Web: www.oxfordhardware.co.uk
Refrigeration Hardware
Power Hinge For Self-Closing Doors
SPC-ZCH-2.5
Hinge with 2.5mm spring
Edgemount Hinge
•
Material: Zamak
•
Material: Zamak
•
Finish: Zinc plated
•
Finish: Polished chrome
•
Self-closing
•
Offset 1 1/8” (28mm)
•
90° dwell
•
•
Maximum opening
of 115°
Standard mounting holes for
interchangeability with competitors’
products
•
Concealed hinge
improves look of
cabinet
•
Serrated adjusting plate allows for
3/16” adjustment
•
•
Internal hinge
position reduces
possibility of
accidental damage
Suitable for left or right handed
operation
•
Drilled and countersunk for No. 12
screws
•
Cartridge assembly
can be used for
LH & RH doors
•
Other spring
sizes available
40 542 2842
Edgemount hinge, chrome plated
Power Hinge Brackets For Self-Closing Doors
REFRIGERATION HARDWARE
Pivot Hinges
•
Material: Zamak
•
Finish: Polished Chrome
PIV.225.ZCH
Top bracket,
left hand
PIV 219 ZCH
Top bracket
PIV.226.ZCH
Bottom bracket
left hand
PIV.227.ZCH
PIV 220 ZCH
Centre bracket
Top bracket,
right hand
PIV.228.ZCH
PIV 221 ZCH
Bottom bracket
Oxford Hardware Limited Tel: 01295 680068
Bottom bracket,
right hand
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
45
Refrigeration Hardware
Edgemount Latches :: L521 Series
Edgemount Latches :: L316 Series
•
Material: Zamak, chrome plated
•
Material: Zamak, chrome plated
•
Available with and without lock
•
Available with and without lock
•
Also brass roller for
hot application
L521
L316
LS521 (With Lock)
REFRIGERATION HARDWARE
L521
Standard latch without lock, nylon roller
LS521
With lock, nylon roller
L521-i
Without lock with stainless steel mechanism, nylon roller
LS521-i
With lock with stainless steel mechanism, nylon roller
Edgemount Latches :: L316D Series
•
Material: Zamak, chrome plated
•
Available with and without lock
•
Also brass roller for hot application
LS316 (With Lock)
L316
Standard latch without lock, nylon roller
LS316
With lock, nylon roller
L316CH
Without lock, brass roller (for hot application)
LS316CH
With lock, brass roller (for hot application)
Edgemount Latches :: L520 Series
•
L316D
Material: Zamak, chrome plated.
Black composite handle
•
Available with and without lock
•
Economy range
LS316D (With Lock)
L520
L316D
Standard latch without lock, nylon roller
LS316D
With lock, nylon roller
L316D-CH
Without lock, metal roller (for hot application)
L520
Standard latch without lock, nylon roller
LS316D-CH
With lock, metal roller (for hot application)
LS520
With lock, nylon roller
Intertechnica Oven Latch :: 1625
46
•
Main application is on
doors in contact with heated
chambers (ovens, provers,
industrial equipment)
•
Slam fastener with adjustable
strike
•
Single latch action for
standard application
•
Option of double latch action
safety latch to release steam
•
Suitable for right and left opening
•
M5 fixing screws not supplied
Oxford Hardware Limited Tel: 01295 680068
1625
Fastener, without Strike
SL24
Single Latch Strike, SL24, Offset: 41-47mm (1 39/64” x 1 27/32”)
SL42
Single Latch Strike, SL42, Offset: 47-65mm (1 27/32” x 2 9/16”)
SL60
Single Latch Strike, SL60, Offset: 65-83mm (2 9/16” x 3 17/64”)
DL24
Double Latch Strike, L24, Offset: 41-47mm (1 39/64” x 1 27/32”)
DL42
Double Latch Strike, L42, Offset: 47-65mm (1 27/32” x 2 9/16”)
DL60
Double Latch Strike, L60, Offset: 65-83mm (2 9/16” x 3 17/64”)
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
KASON Reach-in
Hardware
FULL KASON
CATALOGUE
AVA I L A B L E
ON REQUEST
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
47
KASON :: Reach-in Hardware
Kason Hinge Selector
How to Use This Chart
This Hinge Selector is to assist you in choosing the correct Kason hinges for
commercial refrigeration, foodservice equipment, transportation, industrial and
many other uses.
1. Locate the weight of your door in the far left column, headed Door Weight.
2. Find the width of your door along the bottom of the chart.
3. Where the Weight line and Width column intersect, find the recommended hinge
group code (A, B, etc.).
The Load Chart, below, shows our recommended allowable load per pair of hinges
for each hinge group.
4. Select your hinges from the Kason Hinge Groups, below.
The data applies for normal conditions under static loading by door weight only.
Other factors, such as positive or negative pressure, very high gasket compression,
vibration, corrosive or abrasive atmospheres, or structural movement are not taken
into account. It is the final responsibility of the users to determine the suitability and
capacity required in their specific applications.
NOTE: If exact dimensions and weight for your door is not shown, use the next
higher width and weight.
Hinge Groups A – C shown in Kason Reach-in Hardware
Load Chart
Hinge Groups D – H shown in Kason Walk-in Hardware
Door Weights
kg
lb
KASON REACH-IN HARDWARE
226.8
500
D
D
E
F
F
F
G
G
G
G
H
H
H
H
H
H
H
217.7
480
D
D
E
F
F
F
G
G
G
G
H
H
H
H
H
H
H
208.6
460
D
D
E
E
F
F
F
G
G
G
G
H
H
H
H
H
H
H
199.5
440
D
D
D
E
F
F
F
G
G
G
G
G
H
H
H
H
H
H
H
190.5
420
D
D
D
E
F
F
F
F
G
G
G
G
H
H
H
H
H
H
H
H
181.4
400
D
D
D
E
E
F
F
F
G
G
G
G
G
H
H
H
H
H
H
H
H
172.4
380
D
D
D
D
E
F
F
F
F
G
G
G
G
G
H
H
H
H
H
H
H
163.3
360
D
D
D
D
E
E
F
F
F
G
G
G
G
G
G
H
H
H
H
H
H
154.2
340
D
D
D
D
E
E
F
F
F
F
G
G
G
G
G
G
H
H
H
H
H
145.2
320
C
D
D
D
D
E
E
F
F
F
F
G
G
G
G
G
G
H
H
H
H
136.1
300
C
D
D
D
D
E
E
E
F
F
F
F
G
G
G
G
G
G
G
H
H
127.0
280
C
D
D
D
D
D
E
E
F
F
F
F
F
G
G
G
G
G
G
G
H
117.9
260
C
C
D
D
D
D
D
E
E
F
F
F
F
F
G
G
G
G
G
G
G
108.9
240
C
C
D
D
D
D
D
D
E
E
F
F
F
F
F
F
G
G
G
G
G
99.8
220
C
C
C
D
D
D
D
D
D
E
E
E
F
F
F
F
F
F
G
G
G
90.7
200
B
C
C
D
D
D
D
D
D
D
E
E
E
F
F
F
F
F
F
F
G
81.7
180
B
C
C
D
D
D
D
D
D
D
D
E
E
E
E
F
F
F
F
F
F
72.6
160
B
B
C
C
C
D
D
D
D
D
D
D
D
E
E
E
E
F
F
F
F
63.5
140
B
B
C
C
C
C
D
D
D
D
D
D
D
D
D
D
E
E
E
E
F
54.4
120
B
B
B
C
C
C
C
C
D
D
D
D
D
D
D
D
D
D
D
E
E
45.4
100
A
B
B
B
B
C
C
C
C
C
D
D
D
D
D
D
D
D
D
D
D
36.3
80
A
A
B
B
B
B
B
C
C
C
C
C
C
D
D
D
D
D
D
D
D
27.2
60
A
A
A
A
B
B
B
B
B
B
C
C
C
C
C
C
C
C
C
D
D
18.1
40
A
A
A
A
A
A
A
A
B
B
B
B
B
B
B
B
B
C
C
C
C
20
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
9.0
Door
Width
Inches 12
15
18
21
24
27
30
33
36
39
42
45
48
51
54
57
60
63
66
69
72
cm
30.5 38.1 45.7 53.3 61.0 68.6 76.2 83.8 91.4 99.1 106.7 114.3 121.9 129.5 137.2 144.8 152.4 160.0 167.6 175.3 182.9
Kason Hinge Groups (Order in Pairs)
Group
48
Hinge Model Numbers (See Reach-in Section)
Group
Hinge Model Numbers (See Walk-in Section)
A
139, 212, 214, 1070, 1216, 1216-13
D
1241, 1245, 1246, 1251, 1341
B
220, 1070A, 1071, 1220
E
1074
C
1061, 1071A, 1267
F
1214, 1409
G
1277, 1277L, 1277S, 1277T, 1377S
H
1075, 1076, 1275, 1276
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
KASON :: Reach-in Hardware
212 :: Adjustable Hinge
214 :: Adjustable Hinge
•
Positive adjustment compensates for gasket wear
•
Mounts close to refrigerator door
•
Interchangeable for right or left opening door
•
Requires minimum jamb width
•
Adjustment range is 3.2mm (1/8”)
•
Easy, positive adjustment by loosening mounting screw
and resetting serrated adjustment plate
•
Interchangeable for right or left opening door
•
Material: High pressure, die-cast
zinc flange; brass cover, zinc plated
steel strap
•
Material: High pressure, die-cast
zinc flange and adjustment plate,
brass cover, zinc plated steel strap
•
Finish: Highly polished chrome.
•
Finish: Polished chrome
•
Adjustment Range: 4.8mm
(3/16”)
•
Adjustment Range: 3.2mm (1/8”)
•
Mounting: Drilled and
countersunk for 5.0mm (No.10)
screws
•
Load Rating: See Hinge Selector
Chart, Group A.
•
Mounting: Drilled and
countersunk for 5.0mm (No. 10)
screws
•
Load Rating: See Hinge Selector
Chart, Group A
0212000004
Adjustable Hinge, Offset 22.2mm (7/8”)
0214000004
Adjustable Hinge, Offset 22.2mm (7/8”)
0212000008
Adjustable Hinge, Offset 28.6mm (1 1/8”)
0214000008
Adjustable Hinge, Offset 28.6mm (1 1/8”)
0212000012
Adjustable Hinge, Offset 34.9mm (1 3/8”)
0214000012
Adjustable Hinge, Offset 34.9mm (1 3/8”)
•
Heavy-duty, long wearing design.
•
Fully round pivot pin assures trouble-free operation and
long life
•
Spring tension adjusts quickly on site
•
Adjustable to compensate for gasket compression
•
Interchangeable for right or left opening door
220 Spring Cartridge Kit Installation
•
Material: High pressure, die-cast
zinc flange and adjustment plate,
chrome-plated brass cover, zinc
plated steel strap.
•
Finish: Polished chrome.
•
Adjustment Range: 4.8mm
(3/16”).
•
Mounting: Drilled and
countersunk for 5.0mm (No. 10)
screws.
•
Load Rating: See Hinge Selector
Chart, Group B
KASON REACH-IN HARDWARE
220 :: Spring Hinge
1. Assemble spring cartridge as shown.
2. Place thrust washer and bushing
over hexagon pin on mounted hinge.
Insert adjustment pin into adjustment
bushing assembly. Grasping
adjustment pin, compress spring and
place adjustment bushing assembly
over round pin.
3. Adjust tension; then insert stop pin in
hole of adjustment bushing assembly.
Oxford Hardware Limited Tel: 01295 680068
0220000008
Spring Hinge, Offset 28.6mm (1 1/8”)
0220000012
Spring Hinge, Offset 34.9mm (1 3/8”)
0220000027
Spring Cartridge Kit
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
49
KASON :: Reach-in Hardware
1216 :: Non-Rise Adjustable Hinge
1220 :: Adjustable Hinge
•
Great for use on underbar equipment and refrigerators
•
Larger non-rise hinge for use on heavier reach-in doors
•
Offsets adjust easily by loosening mounting screws and
resetting serrated adjustment plate
•
Offsets adjust easily; just loosen mounting screws and reset
serrated adjustment plate
•
Round bearing pins for longer life than competitive models
•
Use for right or left opening door
•
Simple conversion to spring hinge for self-closing
applications
•
Material: High pressure, die-cast
zinc flange and adjustment plate,
steel strap, stainless steel cover
•
Finish: Polished chrome
•
Adjustment Range: 4.8mm
(3/16”)
•
•
Mounting: Drilled and
countersunk for 5.5mm (No. 12)
screws
Load Rating: See Hinge Selector
Chart, Group A
•
Material: High pressure, die-cast
zinc flange and adjustment plate,
stainless steel cover, zinc plated
steel strap.
•
Finish: Polished chrome.
•
Adjustment Range: 4.8mm
(3/16”).
•
Mounting: Drilled and
countersunk for 5.0mm (No. 10)
screws.
•
Load Rating: See Hinge Selector
Chart, Group B.
KASON REACH-IN HARDWARE
1216000001
Non-Rise Adjustable Hinge, Offset 28.6mm (1 1/8”)
1220000008
Adjustable Hinge, Offset 28.6mm (1 1/8”)
1216000027
Spring Cartridge Kit
1220000012
Adjustable Hinge, Offset 34.9mm (1 3/8”)
0220000027
Spring Cartridge Kit
Spring Cartridge Kit Installation
The 1216 and 1220 hinges easily
convert to a spring hinge for
self-closing applications.
1. Assemble spring
cartridge as shown.
2. Slip bushing over
hexagon pin on
mounted hinge; then
insert adjustment
pin into adjustment
bushing assembly.
3. Grasping
adjustment pin,
compress spring and
place adjustment
bushing assembly over
round pin.
4. Adjust tension; then
insert stop pin in hole
of adjustment bushing
assembly.
1216-31 :: Hi-Temp Brass Oven Hinge
50
•
Non-rise hinge for right or left hand use
•
Designed for ovens, steam cabinets and other heated
applicances
•
Offsets adjust easily; loosen mounting screws and reset
serrated adjustment plate
•
Easily convert the 1216-31 Hi-Temp to a Spring Hinge with
the 1216-27 Spring Cartridge Kit
•
Material: Solid forged brass,
Teflon bushing
•
Finish: Polished chrome
•
Mounting: Drilled and
countersunk for 5.0mm (No. 10)
screws
•
Offset: 28.6mm (1 1/8”)
•
Adjustment Range: 4.8mm
(3/16”)
•
Load Rating: See Hinge Selector
Chart, Group A
Oxford Hardware Limited Tel: 01295 680068
Spring Cartridge Kit Installation
Easily convert the 1216 Hi-Temp Hinge
to a spring hinge with this kit.
1216000031
Hi-Temp Hinge, Solid Brass
1216000027
Spring Cartridge Kit
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
KASON :: Reach-in Hardware
1267 :: Cam-Rise Hinge
•
Beautifully designed and proportioned basic hinge is
engineered for heavy use and long life
•
Self-lubricating Zytel cam allows door to close automatically
or to stay open at 120° angle
•
Reversible cam for use on right or left opening door
•
Lift-off feature allows door to be removed with hinges in
place
•
Adjustable to compensate for gasket compression
•
Spring assisted version available
•
Material: High pressure, die-cast zinc flange, strap and adjustment plate; brass
cover
•
Finish: Polished chrome
•
Offset: 4.8mm (3/16”)
•
Adjustment Range: 41.3 to 60.3mm (1 5/8” to 2 3/8”)
•
Mounting: Flange and strap drilled and countersunk for 5.5mm (No. 12) flat
head screws
•
Load Rating: See Hinge Selector Chart, Group C
Cam-Rise Hinge
1467R :: Double Adjustable Cam-Rise Hinge
•
Sag-compensating hinge assures correct door alignment the first
time, all the time
•
Easy flange adjustment positively locks into place after aligning door,
so hinge holds firmly in place
•
Eliminates floating tapping plates; shims and twisted hinges
•
Traditional strap adjustment compensates for gasket compression
•
Interchanges in whole or in part with other suppliers’ edgemount,
cam-rise hinges
•
Reversible for right or left hand door mounting
Oxford Hardware Limited Tel: 01295 680068
•
Material: High Pressure die-cast zinc flange, strap, and adjustment plates;
stainless steel cover; nylon cam
•
Finish: Polished chrome
•
Offset Range: 41.3mm to 60.3mm (1 5/8” to 2 3/8”)
•
Mounting: Drilled and countersunk for 5.5mm (No.12) flat head screws
•
Other: Adjustment range for both the flange and strap is 4.8mm (3/16”);
120° cam detent
•
Load Rating: See Kason Hinge Selector Chart, Group C
1467R00014
Complete Hinge
1467R00001
Recessed Underside Adjustable Flange
1467R00002
Strap
1467R00003
Adjustable Plate
1467R00004
Cover
1467R00005
Cam
1467R00006
Flange Plug
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
KASON REACH-IN HARDWARE
1267000014
51
KASON :: Reach-in Hardware
139 :: Narrow Flange Hinge
1061 :: Steel Hinge
•
Classic styling for small service
doors
•
•
Rugged design withstands hard use
1061BB Ball Bearing Hinge
•
•
Features all metal ball bearing
washers for high temperature
applications
•
Other specifications are the same
as the 1061
Material: High pressure, die-cast
zinc; stainless steel pin
•
Material: Steel
•
Finish: Kasonized
•
Finish: Polished chrome
•
•
Offsets: See ordering information
•
Mounting: Drilled and
countersunk for 4.0mm (No. 8)
screws
Mounting: Drilled and
countersunk for 5.0mm (No.
10) screws
•
Load Rating: See Hinge
Selector Chart, Group C
•
Load Rating: See Hinge Selector
Chart, Group A
1061000004
Steel Hinge, 0.0mm (Flush)
0139000004
Narrow Flange Hinge, Flush
1061000036
Steel Hinge, Offset 28.6mm (1 1/8”)
0139000032
Narrow Flange Hinge, Offset 22.2mm (7/8”)
1061BB0004
Ball Bearing Hinge, 0.0mm (Flush)
0139000040
Narrow Flange Hinge, Offset 28.6mm (1 1/8”)
1061BB0036
Ball Bearing Hinge, Offset 28.6mm (1 1/8”)
KASON REACH-IN HARDWARE
Narrow Flange Hinges
Nylon Bearing Hinges
•
Workhorse hinges in two sizes
•
•
High strength with stainless steel
through pin
Nylon bearing washers provide
smooth door swing and long life
•
High strength with stainless steel
through pin
1070
1070A
•
Material: High pressure, die-cast
zinc; stainless steel pin
•
Material: High pressure, die-cast
zinc; stainless steel pin
•
Finish: Polished chrome
•
Finish: Polished chrome
1070
1070A
•
Mounting: Drilled and
countersunk for 4.0mm (No. 8)
screws
•
Mounting: Drilled and
countersunk for 4.0mm (No. 8)
screws
•
Load Rating: See Hinge Selector
Chart, Group A
•
Load Rating: See Hinge Selector
Chart, Group B
1070
1071
52
Equipped with nylon thrust washers
1070A
1071
1071A
•
Mounting: Drilled and
countersunk for 5.0mm (No. 10)
screws
•
Mounting: Drilled and
countersunk for 5.0mm (No. 10)
screws
•
Load Rating: See Hinge Selector
Chart, Group B
•
Load Rating: See Hinge Selector
Chart, Group C
1071A
1070000004
Narrow Flange Hinge, Flush
1070A00016
Narrow Flange Hinge, Offset 22.2mm (7/8”)
1070000032
Narrow Flange Hinge, Offset 22.2mm (7/8”)
1070A00024
Narrow Flange Hinge, Offset 28.6mm (1 1/8”)
1070000040
Narrow Flange Hinge, Offset 28.6mm (1 1/8”)
1071A00036
Narrow Flange Hinge, Offset 22.2mm (7/8”)
1071000032
Narrow Flange Hinge, Offset 22.2mm (7/8”)
1071A00044
Narrow Flange Hinge, Offset 28.6mm (1 1/8”)
1071000040
Narrow Flange Hinge, Offset 28.6mm (1 1/8”)
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
KASON :: Reach-in Hardware
1535 :: Pivot Hinge
1537 Pivot Hinge
•
Field-adjustable die-cast zinc spring cartridge lets user select correct tension for
smoother door operation
•
Field-adjustable die-cast zinc spring cartridge lets user select correct tension for
smoother door operation
•
Cam dwell keeps door open beyond 90° for easy access.
Positive stop at 115° prevents interference with adjoining equipment
•
Cam dwell keeps door open beyond 90° for easy access
•
Built-in overclose assures constant door pressure and full gasket seal
Built-in overclose assures constant door pressure and full gasket seal
•
The shorter bracket 1538 may also be used with cartridge assembly 1537
•
Spring Cartridge Assembly with Nut
1537-01
Spring Cartridge Assembly with Nut
1535-11
Half-door Plate is also available for use on ‘Stable Doors’
1537-02
Top Right Hand and Bottom Left Hand Bracket
1537-03
Top Left Hand and Bottom Right Hand Bracket
KASON REACH-IN HARDWARE
1535-01
1539 Pivot Hinge
•
Field-adjustable die-cast zinc
spring cartridge lets user select
correct tension for smoother door
operation
•
Cam dwell keeps door open
beyond 90° for easy access
•
Positive stop at 115° prevents
interference with adjoining
equipment
•
Built-in overclose assures constant
door pressure and full gasket seal
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
1539-21
Lower Left
Spring
Cartridge
Assembly with
Nut
1539-23
Lower Right
Spring
Cartridge
Assembly with
Nut
1539-000034
Top Right
Hand and
Bottom Left
Hand Bracket
1539-000035
Top Left Hand
and Bottom
Right Hand
Bracket
Web: www.oxfordhardware.co.uk
53
KASON :: Reach-in Hardware
170 Series :: Magnetic Latches
•
Satisfies NSF standards for all applications
•
Four handle styles
•
High strength magnetic force keeps door closed and accommodates variations
in cabinet construction
•
Kason ‘breaker action’ quickly releases magnet for fast door opening
•
Adjustable latch body compensates for gasket wear
•
Not affected by door sag
•
Material: High pressure die-cast zinc body and adjustment plate; zinc die-cast
or glass reinforced composite handle; steel strike with nylon spacer
•
Finish: Polished chrome latch body; black composite or polished chrome handle
•
Handle Styles: Straight, offset
•
Mounting: Latch is edge mounted; strike is surface mounted. Drilled and
countersunk for 5.0mm (No. 10) screws
•
Standard Magnet: Nitrile material; holding force approx. 35.0kg (77lb)
•
Optional Ceramic Magnet: Holding force of 59.0kg (130 lb); recommended
for temperature applications above 138.8°C (280°F) or where greater holding
power is required
KASON REACH-IN HARDWARE
0170000008
Offset Composite Handle, Finish: Black, Magnet:
Standard
0170000018
Offset Composite Handle, Finish: Black, Magnet:
Ceramic
0170S00004
Straight Die-Cast Handle, Finish: Polished Chrome,
Magnet: Standard
0170S00014
Straight Die-Cast Handle, Finish: Polished Chrome,
Magnet: Ceramic
0170S00008
Straight Composite Handle, Finish: Black, Magnet:
Standard
0170S00018
Straight Composite Handle, Finish: Black, Magnet:
Ceramic
0170B00024
Offset Die-Cast Handle, Finish: Polished Chrome,
Magnet: Standard
0170B00034
Offset Die-Cast Handle, Finish: Polished Chrome,
Magnet: Ceramic
170 Offset Handle - Composite
170 Straight Handle - Die-Cast or Composite
170 Offset Handle - Die-Cast
544 :: Compact Magnetic Edgemount Latch
•
54
Material: High pressure die-cast zinc body; glass reinforced composite handle;
steel strike
•
Finish: Polished chrome latch body, chrome strike; black composite handle
•
Standard Magnet: Chemical-resistant Nitrile - holding force approx. 18.1kg
(40 lb)
•
Optional Hi-temp Magnet: Ceramic - holding force of 29.5kg (65 lb).
Recommended for temperature applications above 138.8° C (280° F) or where
greater holding power is required
•
Mounting: Latch is edge mounted; strike is surface mounted. Drilled and
countersunk for 5.0mm (No. 10) flat head screws
Oxford Hardware Limited Tel: 01295 680068
•
Compact size for smaller heated
cabinets where space is limited
•
Non-heat conducting composite,
offset handle
•
Kason’s time-tested magnetic
latching system
•
Breaker action releases magnet for
easy opening
•
Operates smoothly with handle
mounted up or down
•
Not affected by door sag
•
Use on right or left opening doors
0544000004
Compact Edgemount Latch, Magnet: Standard
0544000014
Compact Edgemount Latch, Magnet: Ceramic
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
KASON :: Reach-in Hardware
172 :: Magnetic-Mechanical Latch
Cylinder locks may be keyed
alike or differently; 5 key changes
available; please specify.
Models available
with heat-resistant, vinyl sleeve
Edgemount Mechanical Latches
•
Smooth-operating triggeraction latches
•
Kason patented two-way
adjustable MICROturn strike
•
Keeps door shut even when adjacent
doors are slammed
Adjust to compensate for
gasket compression and
door sag
•
•
Two-way strike adjustment compensates
for door sag and gasket wear
Positive, air-tight closure with
little force
•
•
Unique design of strike ensures full
magnetic attraction at each adjustment
Release easily with a finger’s
pull
•
Material: High pressure die-cast zinc
body, handle and strike
•
Finish: Polished chrome
•
Handle Styles: Straight, offset
•
Lock Selection: Cylinder or non-cylinder
locking
•
Mounting: Latch is edge mounted;
strike is surface mounted. Drilled and
countersunk for 5.0mm (No. 10) screws
•
Magnetic force combined with
mechanical latching provide the ultimate
in positive door closure and sealing
•
Latch releases with a light touch
•
Mechanical latching with cylinder lock
offers positive security
•
533D
538
KASON REACH-IN HARDWARE
533D
538
•
Material: High pressure die-cast zinc body, handle and strike; brass tongue
•
Finish: Polished chrome
•
Mounting: Drilled and countersunk for 5.0mm (No. 10) screws
Cylinder locks may be keyed alike or differently; 5 key changes available; please specify.
Models available with heat-resistant, vinyl sleeve
0172000006
Magnetic-Mechanical Latch, Handle: Straight
0172B00006
Magnetic-Mechanical Latch, Handle: Offset
0533D00004
Edgemount Mechanical Latch, Lock: Padlock
0172C00006
Magnetic-Mechanical Latch, Handle: Straight,
Lock: Cylinder
0538000004
Edgemount Mechanical Latch, Lock: Padlock
0538C00004
Edgemount Mechanical Latch, Lock: Cylinder
0533D00024
Strike for 533D, 538 and 538C
0538CM0004
Cylinder Kit for 538
0172BC0006
0172CM0004
Magnetic-Mechanical Latch, Handle: Offset, Lock:
Cylinder
Cylinder Kit for 172
535 :: Roller Grip
•
Kason Original - the standard for
concealed latching. Tapered strike
assures complete closure
•
Material: High pressure die-cast
zinc tongue housing and strike;
nylon rollers
•
Strike adjusts up or down, or side to side
•
Finish: Polished chrome
•
Use on doors and drawers
•
Mounting: Tongue housing drilled
and countersunk for 5.0mm
(No. 10) screws. Strike has slotted
screw holes
Oxford Hardware Limited Tel: 01295 680068
0535H00004
Roller Grip Latch, Spring: Heavy, Separating Force: 116 to 160N (26 to 36lb)
0535M00004
Roller Grip Latch, Spring: Medium, Separating Force: 85 to 114N (19 to 25lb)
0535L00004
Roller Grip Latch, Spring: Light, Separating Force: 53 to 80N (12 to 18lb)
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
55
KASON :: Reach-in Hardware
Edgemount Mechanical Latches
173 / 174 :: Latch Body
173 :: Universal Strike
•
Positive latching keeps door shut
tight; guards against pop-opens
•
Finger-tip touch opening
•
Cylinder locking and non-locking
models
•
Two-way adjustment compensates
for door sag and gasket wear
•
Use with all standard gaskets for
economical installation
•
Compact size fits most units
•
Material: High pressure die-cast
zinc body and handle, die-cast and
steel strike
•
Finish: Polished chrome
•
Mounting: Latch is edge mounted;
strikes are surface mounted. Drilled
and countersunk for 5.0mm
(No. 10) screws
174 :: Standard Strike
•
Latch with universal strike replaces
competitive latch
•
Latch body with 174 standard strike
•
Strike Adjustment Range: 7.1mm
to 15.1mm (9/32” to 19/32”)
•
•
Mounting: Strike drilled for
5.0mm (No. 10) screws
Strike Adjustment Range:
10.3mm to 18.3mm
(13/32” to 23/32”)
•
Mounting: Strike drilled for
5.0mm (No. 10) screws
KASON REACH-IN HARDWARE
173
Universal Strike
174
Standard Strike
174B-14 :: Hi-Temp Oven Latch
Offset
•
Oven Latch with all the benefits of the popular Kason 174 Edgemount Latch
•
Heat-resistant brass roller
•
Cool-touch handle with plastic sleeve
•
Complements Kason No. 1216-31 Hi-Temp brass oven hinge
•
Strike Adjustment Range:
10.3mm to 18.3mm
(13/32” to 23/32”)
Straight
Cylinder locks may be keyed alike or differently; 5 key changes available; please specify.
Models available with heat-resistant, vinyl sleeve
56
0173000004
Straight Handle, Non-Locking
0173B00004
Offset Handle, Non-Locking
0173C00004
Straight Handle, Cylinder Lock
0173BC0004
Offset Handle, Cylinder Lock
0174000004
Straight Handle, Non-Locking
0174B00004
Offset Handle, Non-Locking
0174C00004
Straight Handle, Cylinder Lock
0174BC0004
Offset Handle, Cylinder Lock
0174B00014
Hi-Temp Oven Latch with Brass Roller and Plastic Sleeve,
Offset Handle
0174C00012
Cylinder Kit for 173, 174 and 174B
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
KASON :: Reach-in Hardware
930 Series :: Trigger Action Latches
Strikes
Adjustable Strike A
•
Dependable, time-tested trigger action latch
•
Select one of six strikes to customize your application
•
Adjustable strikes feature either Kason’s patented micrometer or microturn strike
for hairline-fine adjustments
•
Interchangeable for right or left opening doors
•
Standard padlocking feature.
•
930 latch body and strikes may be ordered separately
3 hole Micrometer Strike D
Material: High pressure die-cast
zinc body; solid brass tongue
•
Finish: Polished chrome
•
Offsets: See ordering information.
•
Mounting: Drilled and
countersunk for 4.0mm (No. 8)
screws
Stationary Strike B
2 hole Micrometer Strike E
Cylinder locks may be keyed alike or
differently; 5 key changes available;
please specify.
Models available with
heat-resistant, vinyl sleeve
3 hole Micrometer Strike C
0930A0004
Latch with Adjustable Strike A, Offset: 0.0mm to 9.5mm (Flush to 3/8”)
0930B0004
Latch with Stationary Strike B, Offset: 6.4mm (1/4”)
0930C0004
Latch with 3 hole Micrometer Strike C, Offset: 19.9mm to 31.8mm (3/4” to 1 1/4”)
0930D0004
Latch with 3 hole Microturn Strike D, Offset: 22.8mm to 31.8mm (7/8” to 1 1/4”)
0930E0004
Latch with 2 hole Microturn Strike E, Offset: 22.8mm to 31.8mm (7/8” to 1 1/4”)
0930F0004
Latch with 2 hole Micrometer Strike F, Offset: 19.9mm to 31.8mm (3/4” to 1 1/4”)
KASON REACH-IN HARDWARE
•
2 hole Micrometer Strike F
931 :: Trigger Action Latch
Oxford Hardware Limited Tel: 01295 680068
•
Enlarged version of the popular Kason No. 930, for large reach-in doors
•
Includes patented micrometer strike for hairline-fine adjustments
•
Material: High pressure die-cast
zinc body; brass tongue and strike
insert
•
Finish: Polished chrome
•
Mounting: Drilled and
countersunk for 5.0mm (No. 10)
screws
0931000004
Trigger Action Latch, Offset: 0-3.2mm (0-1/8”)
0931000008
Trigger Action Latch, Offset: 22.2-28.6mm (7/8”-1 1/8”)
0931000012
Trigger Action Latch, Offset: 28.6-34.9mm (1 1/8-1 3/8”)
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
57
KASON :: Reach-in Hardware
Explosion Venting Latches
•
Installs on right or left opening door
•
Factory Mutual test rated to release at force of 407N (91.5 lb)
•
Material: High pressure die-cast zinc body, handle and strike housing; extruded
brass tongue and strike insert
•
Finish: Polished chrome
WARNING: Explosion venting latches are intended to release at designated pressures to protect the enclosures on which they are mounted. Users must determine safe
pressure levels for their specific applications. Because installations and environmental conditions vary, regular maintenance and latch function checks are necessary to assure
proper operation.
930X Trigger Action
931CX Trigger Action
•
Mounting: Drilled and
countersunk for 4.0mm (No. 8)
screws
•
Mounting: Drilled and
countersunk for 4.0mm (No. 8)
screws
KASON REACH-IN HARDWARE
0930AX0004
Explosion Venting Latch, Offset: 0-9.5mm (0-3/8”)
0931AX0004
Explosion Venting Latch, Offset: 0-6.4mm (0-1/4”)
0930CX0004
Explosion Venting Latch, Offset: 19.1-31.8mm (3/4”-1 1/4”)
0931CX0004
Explosion Venting Latch, Offset: 22.2-28.6mm (7/8”-1 1/8”)
0931HX0004
Explosion Venting Latch, Offset: 28.6-34.9mm (1 1/8”-1 3/8”)
812 :: Cam Action Latch
58
Oxford Hardware Limited Tel: 01295 680068
•
Engineered specifically for heated cabinets where high gasket compression is
required
•
Positive cam action maintains tight seal and allows easy opening under varying
temperatures
•
Easy-grip handle stays cool with hi-temp vinyl insulating sleeve
•
Multiple offsets available
•
Material: Cast ZA12 alloy handle,
strike and base; stainless steel pin
•
Finish: Polished chrome
•
Offsets: Flush, 31.5mm (1 15/
64”), 46.7mm (1 27/32”)
•
Mounting: Handle drilled and
countersunk and strike drilled for
6.0mm (1/4”) screws
0812000004
Cam Action Latch, Flush Mount
0812000003
Cam Action Latch, Offset 31.5mm (1 1/4”)
0812000002
Cam Action Latch, Offset 46.8mm (1 27/32”)
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
KASON :: Reach-in Hardware
Compensation Valves :: VA Series
•
Internal/external pressure compensation valves for low temperature upright freezers
and glass cabinets
•
Allows doors to be opened and closed frequently without generating the suction effect
•
Suitable for assembly in upright or chest freezers with capabilities up to 700-800 litres
•
Aluminium valves do not require heating elements since they must be installed close to
a source of heat
•
Valves equipped with an alimentary thermoplastic cap with a sealing ring gasket
Installation Notes: Drill a through
hole, 20mm dia. horizontal for VA 90
and vertical for VA 180
VA 90
Compensation Valve, suitable for installation on the rear wall
next to the condenser
VA 180
Compensation Valve, suitable for installation in the motor
compartment
KASON REACH-IN HARDWARE
0660 Series Energy Saving Condensate Evaporator Trays
•
Designed for longer life and energy savings
•
Thermostatically controlled, solid state heater provides reliable operation
•
Features one-piece pan of corrosion resistant #360 cast aluminium that
provides long term performance and requires less frequent cleaning
•
Cuts heat loss by directing more heat to the wetted pan areas and less to the
pan exterior
•
Thermostatically controlled heater lowers wattage automatically to conserve
energy when the pan is empty
•
Strategic placement of the heating element extends heater life
High Efficiency Energy Saving Evaporator
High efficiency, 225W model achieves up to 90% of the evaporation of a typical
high wattage unit, using 25% less energy
•
Material: Die cast #360 series aluminium pan; spring wire legs
•
Finish: Natural
•
Power Supply and Connection: See product table below
•
Volume: 1479ml (50fl.oz)
•
Size: 120 x 317 x 73mm (4 3/4” x 12 1/2” x 2 7/8”)
Optional Wall Mounted Bracket
•
Bracket mounts to back of cabinet
•
Pan snaps in place
Product Code Evaporation Rate
0660000006 118ml (4.0oz)/hour
0660000036 157ml (5.3oz)/hour
Oxford Hardware Limited Tel: 01295 680068
0660000006
220V, 160W, with 457mm (18”) wire leads
0660000036
220V, 225W, with 1829mm (72”) wire leads
0660000064
Wall Mounted Bracket
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
59
KASON Walk-in
Hardware
New
Stainless Steel Latch & Hinges Page 68
FULL KASON
CATALOGUE
AVA I L A B L E
ON REQUEST
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
61
KASON :: Walk-in Hardware
Kason Hinge Selector
How to Use This Chart
This Hinge Selector is to assist you in choosing the correct Kason hinges for
commercial refrigeration, foodservice equipment, transportation, industrial and
many other uses.
1. Locate the weight of your door in the far left column, headed Door Weight.
2. Find the width of your door along the bottom of the chart.
3. Where the Weight line and Width column intersect, find the recommended hinge
group code (A, B, etc.).
The Load Chart, below, shows our recommended allowable load per pair of hinges
for each hinge group.
4. Select your hinges from the Kason Hinge Groups, below.
The data applies for normal conditions under static loading by door weight only.
Other factors, such as positive or negative pressure, very high gasket compression,
vibration, corrosive or abrasive atmospheres, or structural movement are not taken
into account. It is the final responsibility of the users to determine the suitability and
capacity required in their specific applications.
NOTE: If exact dimensions and weight for your door is not shown, use the next
higher width and weight.
Hinge Groups A – C shown in Kason Reach-in Hardware
Load Chart
Hinge Groups D – H shown in Kason Walk-in Hardware
Door Weights
kg
lb
KASON WALK-IN HARDWARE
226.8
500
D
D
E
F
F
F
G
G
G
G
H
H
H
H
H
H
H
217.7
480
D
D
E
F
F
F
G
G
G
G
H
H
H
H
H
H
H
208.6
460
D
D
E
E
F
F
F
G
G
G
G
H
H
H
H
H
H
H
199.5
440
D
D
D
E
F
F
F
G
G
G
G
G
H
H
H
H
H
H
H
190.5
420
D
D
D
E
F
F
F
F
G
G
G
G
H
H
H
H
H
H
H
H
181.4
400
D
D
D
E
E
F
F
F
G
G
G
G
G
H
H
H
H
H
H
H
H
172.4
380
D
D
D
D
E
F
F
F
F
G
G
G
G
G
H
H
H
H
H
H
H
163.3
360
D
D
D
D
E
E
F
F
F
G
G
G
G
G
G
H
H
H
H
H
H
154.2
340
D
D
D
D
E
E
F
F
F
F
G
G
G
G
G
G
H
H
H
H
H
145.2
320
C
D
D
D
D
E
E
F
F
F
F
G
G
G
G
G
G
H
H
H
H
136.1
300
C
D
D
D
D
E
E
E
F
F
F
F
G
G
G
G
G
G
G
H
H
127.0
280
C
D
D
D
D
D
E
E
F
F
F
F
F
G
G
G
G
G
G
G
H
117.9
260
C
C
D
D
D
D
D
E
E
F
F
F
F
F
G
G
G
G
G
G
G
108.9
240
C
C
D
D
D
D
D
D
E
E
F
F
F
F
F
F
G
G
G
G
G
99.8
220
C
C
C
D
D
D
D
D
D
E
E
E
F
F
F
F
F
F
G
G
G
90.7
200
B
C
C
D
D
D
D
D
D
D
E
E
E
F
F
F
F
F
F
F
G
81.7
180
B
C
C
D
D
D
D
D
D
D
D
E
E
E
E
F
F
F
F
F
F
72.6
160
B
B
C
C
C
D
D
D
D
D
D
D
D
E
E
E
E
F
F
F
F
63.5
140
B
B
C
C
C
C
D
D
D
D
D
D
D
D
D
D
E
E
E
E
F
54.4
120
B
B
B
C
C
C
C
C
D
D
D
D
D
D
D
D
D
D
D
E
E
45.4
100
A
B
B
B
B
C
C
C
C
C
D
D
D
D
D
D
D
D
D
D
D
36.3
80
A
A
B
B
B
B
B
C
C
C
C
C
C
D
D
D
D
D
D
D
D
27.2
60
A
A
A
A
B
B
B
B
B
B
C
C
C
C
C
C
C
C
C
D
D
18.1
40
A
A
A
A
A
A
A
A
B
B
B
B
B
B
B
B
B
C
C
C
C
20
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
9.0
Door
Width
Inches 12
15
18
21
24
27
30
33
36
39
42
45
48
51
54
57
60
63
66
69
72
cm
30.5 38.1 45.7 53.3 61.0 68.6 76.2 83.8 91.4 99.1 106.7 114.3 121.9 129.5 137.2 144.8 152.4 160.0 167.6 175.3 182.9
Kason Hinge Groups (Order in Pairs)
Group
62
Hinge Model Numbers (See Reach-in Section)
Group
Hinge Model Numbers (See Walk-in Section)
A
139, 212, 214, 1070, 1216, 1216-13
D
1241, 1245, 1246, 1251, 1341
B
220, 1070A, 1071, 1220
E
1074
C
1061, 1071A, 1267
F
1214, 1409
G
1277, 1277L, 1277S, 1277T, 1377S
H
1075, 1076, 1275, 1276
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
KASON :: Walk-in Hardware
Reversible Cam-Rise Hinges
1245
1246
Hinge, Offset: 0.0mm (Flush), Finish: Tuffkote
1245000016
Hinge, Offset: 28.6mm (1 1/8”), Finish: Tuffkote
1245000020
Hinge, Offset: 31.8mm (1 1/4”), Finish: Tuffkote
1245000024
Hinge, Offset: 34.9mm (1 3/8”), Finish: Tuffkote
1245000052
Hinge, Offset: 38.1mm (1 1/2”), Finish: Tuffkote
1245000056
Hinge, Offset: 41.3mm (1 5/8”), Finish: Tuffkote
1245000060
Hinge, Offset: 44.5mm (1 3/4”), Finish: Tuffkote
1245000064
Hinge, Offset: 47.6mm (1 7/8”), Finish: Tuffkote
1245000028
Hinge, Offset: 0.0mm (Flush), Finish: Polished Chrome
1245000032
Hinge, Offset: 28.6mm (1 1/8”), Finish: Polished Chrome
1245000044
Hinge, Offset: 31.8mm (1 1/4”), Finish: Polished Chrome
1245000048
Hinge, Offset: 34.9mm (1 3/8”), Finish: Polished Chrome
1245000068
Hinge, Offset: 38.1mm (1 1/2”), Finish: Polished Chrome
1245000072
Hinge, Offset: 41.3mm (1 5/8”), Finish: Polished Chrome
1245000076
Hinge, Offset: 44.5mm (1 3/4”), Finish: Polished Chrome
1245000080
Hinge, Offset: 47.6mm (1 7/8”), Finish: Polished Chrome
1245000082
Hinge, Offset: 50.8mm (2”), Finish: Polished Chrome
1245000088
Hinge, Offset: 0.0mm (Flush), Finish: Brushed Chrome
1245000112
Hinge, Offset: 28.6mm (1 1/8”), Finish: Brushed Chrome
1245000116
Hinge, Offset: 31.8mm (1 1/4”), Finish: Brushed Chrome
1245000120
Hinge, Offset: 34.9mm (1 3/8”), Finish: Brushed Chrome
1245000124
Hinge, Offset: 38.1mm (1 1/2”), Finish: Brushed Chrome
1245000128
Hinge, Offset: 41.3mm (1 5/8”), Finish: Brushed Chrome
1245000132
Hinge, Offset: 44.5mm (1 3/4”), Finish: Brushed Chrome
1245000136
Hinge, Offset: 47.6mm (1 7/8”), Finish: Brushed Chrome
1245000138
Hinge, Offset: 50.8mm (2”), Finish: Brushed Chrome
1246000004
Hinge, Flush, Finish: Tuffkote
1246000028
Hinge, Flush, Finish: Polished Chrome
1246000040
Hinge, Flush, Finish: Brushed Chrome
Oxford Hardware Limited Tel: 01295 680068
Industry standard self-closing cam-rise hinges
•
Door opens with minimum effort. Strong self-lubricating nylon cam delivers
smooth, trouble-free door operation
•
Cam-rise action reduces gasket wear, even with irregular floors
•
Built-in dwell holds door open beyond 90°
•
Doors lift off without disassembly or removing hinges
•
Simple manual operation reverses hinges for use on right or left opening door
•
Material: High pressure die-cast zinc with self-lubricating nylon cam
•
Finish: See ordering information. Powder coated finishes available for severe
environmental applications
•
Offsets: See ordering information
•
Mounting: Drilled and countersunk for 6.0mm (1/4”) flat head screws
•
Load Rating: See Hinge Selector Chart, Group D
Reverse hinges in minutes
KASON WALK-IN HARDWARE
1245000004
•
1. Lift strap from flange and remove
pin assembly
2. Pop out cap. Turn strap 180°
Re-insert pin assembly in strap
3. Reposition strap into flange and
replace cap
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
63
KASON :: Walk-in Hardware
Cam-Rise Hinges
•
Designed for infitting doors
•
Provides self-closing action
•
Solid steel cam smoothly glides
over hardened steel roller to easily
lift heaviest doors
1275
1276 :: Enlarged Heavy Duty Hinge
•
Use where irregular floors interfere
with free operation of doors
•
Non-reversible; must be ordered
right or left handed
•
Material: Heavy gauge steel strap,
malleable iron flange
•
Finish: Kasonized
•
Mounting: Strap drilled for 9.5mm
(3/8”) screws. Flange drilled for
9.5mm (3/8”) lag screws
•
Load Rating: See Hinge Selector
Chart, Group H
1275 :: Heavy Duty Hinge
1276000020
Hinge - Left Hand, Offset: 28.6mm (1-1/8”)
1275000020
Hinge - Left Hand, Offset: 28.6mm (1-1/8”)
1276000024
Hinge - Right Hand, Offset: 28.6mm (1-1/8”)
1275000024
Hinge - Right Hand, Offset: 28.6mm (1-1/8”)
1276000028
Hinge - Left Hand, Offset: 31.8mm (1 1/4”)
1275000028
Hinge - Left Hand, Offset: 31.8mm (1 1/4”)
1276000032
Hinge - Right Hand, Offset: 31.8mm (1-1/4”)
1275000032
Hinge - Right Hand, Offset: 31.8mm (1-1/4”)
1277 Series :: Heavy Duty Hinges
•
KASON WALK-IN HARDWARE
1277
•
•
Mounting: Drilled for 9.5mm
(3/8”) screws
•
Load Rating: See Hinge Selector
Chart, Group G
Finish: Kasonized. Powder coated
finishes available for severe
environmental applications
•
Tough, economical self-closing hinges
•
Sizes to fit all supermarket, cold storage and other heavy duty walk-in
requirements
•
Precision machined steel cams gently raise and lower door for easier opening
and less gasket wear
1277000004
Hinge, Strap: 533.4mm (21”), Offset: 0.0mm (Flush)
1277000008
Hinge, Strap: 533.4mm (21”), Offset: 28.6mm (1 1/8”)
Extra wide strap and reinforcing ribs on underside of flange provide greater
strength and durability
1277000010
Hinge, Strap: 533.4mm (21”), Offset: 31.8mm (1 1/4”)
1277000012
Hinge, Strap: 533.4mm (21”), Offset: 34.9mm (1 3/8”)
•
Stress tested through thousands of slam cycles
1277000014
Hinge, Strap: 533.4mm (21”), Offset: 38.1mm (1 1/2”)
•
Reversible, without disassembly, for right or left opening door
1277000016
Hinge, Strap: 533.4mm (21”), Offset: 41.3mm (1 5/8”)
1277000018
Hinge, Strap: 533.4mm (21”), Offset: 44.5mm (1 3/4”)
1277000020
Hinge, Strap: 533.4mm (21”), Offset: 47.6mm (1 7/8”)
1277L00008
Hinge, Strap: 685.8mm (26”), Offset: 28.6mm (1 1/8”)
1277L00010
Hinge, Strap: 685.8mm (26”), Offset: 31.8mm (1 1/4”)
1277L00012
Hinge, Strap: 685.8mm (26”), Offset: 34.9mm (1 3/8”)
1277L00016
Hinge, Strap: 685.8mm (26”), Offset: 41.3mm (1 5/8”)
1277S00008
Hinge, Strap: 293.7mm (11 5/8”), Offset: 28.6mm (1 1/8”)
1277S00010
Hinge, Strap: 293.7mm (11 5/8”), Offset: 31.8mm (1 1/4”)
1277S00012
Hinge, Strap: 293.7mm (11 5/8”), Offset: 34.9mm (1 3/8”)
1277S00014
Hinge, Strap: 293.7mm (11 5/8”), Offset: 38.1mm (1 1/2”)
1277S00016
Hinge, Strap: 293.7mm (11 5/8”), Offset: 41.3mm (1 5/8”)
1277S00018
Hinge, Strap: 293.7mm (11 5/8”), Offset: 44.5mm (1 3/4”)
1277T00004
Hinge, Strap: 358.2mm (14”), Offset: 0.0mm (Flush)
1277T00008
Hinge, Strap: 358.2mm (14”), Offset: 28.6mm (1 1/8”)
1277T00010
Hinge, Strap: 358.2mm (14”), Offset: 31.8mm (1 1/4”)
1277T00012
Hinge, Strap: 358.2mm (14”), Offset: 34.9mm (1 3/8”)
1277T00014
Hinge, Strap: 358.2mm (14”), Offset: 38.1mm (1 1/2”)
1277T00016
Hinge, Strap: 358.2mm (14”), Offset: 41.3mm (1 5/8”)
1277T00018
Hinge, Strap: 358.2mm (14”), Offset: 44.5mm (1 3/4”)
1277T00020
Hinge, Strap: 358.2mm (14”), Offset: 47.6mm (1 7/8”)
•
1277
1277L
1277S
1277T
64
Material: High pressure die-cast
zinc flange, 4.8mm (3/16”)
thick steel strap, 15.9mm (5/8”)
diameter steel cam pin
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
KASON :: Walk-in Hardware
Steel Strap Hinges
•
Smooth and durable
•
•
Smooth action for coolers, freezers
and cold storage door
Material: Cast iron flange, steel
strap, nylon bearing, steel pin
•
Finish: Kasonized
•
Offsets: See order information,
below
1075
Iron Strap Hinges
1074 :: Strap Hinge
•
Strap Length: 346.1mm (13 5/8”)
•
Mounting: Strap drilled for 6.0mm (1/4”) screws; flange drilled for 8.0mm
(5/16”) lag screws
•
Load Rating: See Hinge Selector Chart, Group E
1214
•
Tough iron hinges feature a steel flange for extra strength
•
Material: Malleable iron strap, steel flange
•
Finish: Kasonized
1074000008
Hinge, Offset: 0.0mm (Flush)
•
Offsets: See order information, below
1074000020
Hinge, Offset: 28.6mm (1 1/8”)
•
Mounting: Holes drilled and countersunk for 6.0mm (1/4”) screws
•
Load Rating: See Hinge Selector Chart, Group F
1075 :: Heavy Duty Strap Hinge
1214 :: Heavy Duty Strap Hinge
Strap Length: 533.4mm (21”)
•
Mounting: Strap and flange drilled for 9.5mm (3/8”) lag screws
•
Load Rating: See Hinge Selector Chart, Group H
1075000004
Hinge, Offset: 0.0mm (Flush)
1075000016
Hinge, Offset: 28.6mm (1 1/8”)
1075000020
Hinge, Offset: 31.8mm (1 1/4”)
1075000024
Hinge, Offset: 34.9mm (1 3/8”)
•
Strap Length: 330.2mm (13”)
KASON WALK-IN HARDWARE
•
1214000012
Heavy Duty Iron Strap Hinge, Offset: 28.6mm (1 1/8”)
1214000016
Heavy Duty Iron Strap Hinge, Offset: 31.8mm (1 1/4”)
1214000020
Heavy Duty Iron Strap Hinge, Offset: 34.9mm (1 3/8”)
1214000024
Heavy Duty Iron Strap Hinge, Offset: 38.1mm (1 1/2”)
1076 :: Extra Heavy Duty Strap Hinge
•
Strap Length: 660.4mm (26”)
•
Mounting: Strap and flange drilled for 9.5mm (3/8”) lag screws
•
Load Rating: See Hinge Selector Chart, Group H
1076000016
Hinge, Offset: 28.6mm (1 1/8”)
1076000020
Hinge, Offset: 31.8mm (1 1/4”)
1076000024
Hinge, Offset: 34.9mm (1 3/8”)
Oxford Hardware Limited Tel: 01295 680068
1409 :: Hinge
•
Strap Length: 212.7mm (8 3/8””)
1409000004
Iron Strap Hinge, Offset: 0.0mm (Flush)
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
65
KASON :: Walk-in Hardware
1241 :: Heavy Duty Double Knuckle Hinge
•
Material: High pressure die-cast zinc with stainless steel pin and
nylon bearings
•
Finish: Polished chrome
•
Offsets: See order information, below
•
Strap Length: 228.6mm (9”)
•
Mounting: Holes drilled and countersunk for 6.0mm (1/4”)
screws. Strap available with three different mounting hole
locations; refer to dimensions A and B on drawing
•
Load Rating: See Hinge Selector Chart, Group D
•
Engineered to take great stress and
resist sag
1241000004
Hinge, Offset: 0.0mm (Flush), Dimension A: 60.3mm (2 3/8”), Dimension B: 47.6mm (1 7/8”)
•
Exclusive ribbed underside
construction reduces weight while
adding strength
1241000008
Hinge, Offset: 28.6mm (1 1/8”), Dimension A: 60.3mm (2 3/8”), Dimension B: 47.6mm (1 7/8”)
1241H00004
Hinge, Offset: 0.0mm (Flush), Dimension A: 43.6mm (1 23/32”), Dimension B: 42.9mm (1 11/16”)
1241S00004
Hinge, Offset: 0.0mm (Flush), Dimension A: 30.2mm (1 3/16”), Dimension B: 44.4mm (1 3/4”)
1251 :: Heavy Duty Double Knuckle Hinge
KASON WALK-IN HARDWARE
Exclusive ribbed construction
•
Longer version of Kason 1241 hinge
•
Exclusive ribbed underside construction reduces weight
while adding strength
•
Material: High pressure die-cast zinc with stainless steel
pin and nylon bearings
•
Finish: Polished chrome
•
Offsets: See order information, below
•
Strap Length: 304.8mm (12”)
•
Mounting: Holes drilled and countersunk for 6.0mm
(1/4”) screws
•
Load Rating: See Hinge Selector Chart, Group D
1251000008
Hinge, Offset: 28.6mm (1 1/8”)
1251000012
Hinge, Offset: 31.8mm (1 1/4”)
1251000016
Hinge, Offset: 34.9mm (1 3/8”)
1341 :: Stainless Steel Double Knuckle Hinge
•
66
Classic Kason design in high
strength polished stainless steel
•
Engineered to accept extreme
stress and resist door sag
•
Ultimate hinge for use in process
plants, harsh outdoor weather and
caustic environments
•
Resists abuse and tampering
•
Order right hand and left hand
separately
•
Double thrust washers provide
smoothest operation
1341000003
Stainless Steel Strap Hinge, Flush Left Hand
1341000004
Stainless Steel Strap Hinge, Flush Right Hand
Oxford Hardware Limited Tel: 01295 680068
•
Material: 304 Stainless steel with
stainless pin and nylon bearings
•
Finish: Polished
•
Offset: Flush
•
Strap Length: 228.6mm (9”)
Fax: 01295 688123 Email: [email protected]
•
Mounting: Holes drilled and
countersunk for 6.0mm (1/4”)
screws
•
Load Rating: See Kason Hinge
Selector Chart, Group D
Web: www.oxfordhardware.co.uk
KASON :: Walk-in Hardware
1377S :: Stainless Steel Self-Closing Hinge
•
Self-closing, cam-rise hinge is extra rugged for challenging applications
•
Precision-machined stainless steel cams gently raise and lower large doors
•
Cam action assures effortless opening and less gasket wear
•
Strap reverses for right or left opening doors without disassembly
•
Material: Polished 316 Series stainless steel flange, 5mm (3/16”) thick strap
and 16mm (5/8”) diameter cam pins
•
Offset: See order information, below
•
Strap Length: 294mm (11 5/8”)
•
Mounting: Holes drilled and countersunk for 10mm (3/8”) screws
•
Load Rating: See Kason Hinge Selector Chart, Group G.
1377S00004
1091 :: Spring Action Door Closer
•
•
Material: Steel with polystyrene
cover
•
Finish: Kasonized
•
Offsets: See ordering information
•
Mounting: Housing drilled for
5.5mm (No. 12) screws. Strike
drilled for 5.0mm (No. 10) screws
Automatically closes door from 10°
off closed position
•
Easy installation
•
Furnished with grey polystyrene
cover
1091000004
Closer, Hook Offset: 0.0mm (Flush), Finish: Kasonized
1091000008
Closer, Hook Offset: 28.6mm (1 1/8”), Finish: Kasonized
•
Operates by direct force adding
to natural swing momentum of
closing door
•
Designed to overcome slowing
action of gaskets and air pressure.
Provides fast, full closure for heavy
walk-in doors
•
Easy installation; simply snaps onto
concealed mounting plate
•
Simple spring mechanism gives
long, trouble-free life
•
Patented solid steel housing and
bend-resistant hook assure long
wear in heavy use
•
Rubber roller ensures quiet
operation
•
Ideal complement for Kason
Walk-in door hardware to provide
self-closing doors
•
Material: Steel housing and strike
•
Finish: Bright chrome
•
Mounting: Holes drilled for
5.0mm (No. 10) screws
1377S00008
1377S00004
Stainless Steel Self-closing Hinge,
Offset: Flush, Length: 342.9mm (13 1/2”)
Dim. A: 23.8mm (15/16”), Dim B: 100.8mm (3 31/32”)
1377S00008
Stainless Steel Self-closing Hinge,
Offset: 29mm (1 1/8”), Length: 346.1mm (13 21/32”)
Dim. A: 23.8mm (15/16”), Dim B: 104.0mm (4 3/32”)
Oxford Hardware Limited Tel: 01295 680068
1095000013
Spring Action Door Closer
1094000025
Hook for 1095 Door Closer, Offset: 0.0mm (Flush)
1094000029
Hook for 1095 Door Closer, Offset: 28.6mm (1 1/8”)
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
KASON WALK-IN HARDWARE
1095 :: Spring Action Door Closer
67
KASON :: Walk-in Hardware
1092 :: Hydraulic Door Closer
•
Material: Steel
•
Finish: Kasonized
•
Mounting: Holes drilled for
5.0mm (No. 10) screws
1094 :: Hydraulic Door Closers
•
Brakes movement, shuts door
noiselessly and keeps it closed
•
Recloses door opened as result of
temperature-pressure build up
•
Long-wearing
1092000004
Hydraulic Door Closer, Hook Offset: 0.0mm (Flush)
1092000008
Hydraulic Door Closer, Hook Offset: 28.6mm (1 1/8”)
1094 Sure Close™
Hydraulic Door Closers
•
Powerful gas-loaded hydraulic
cylinder guarantees controlled
closure
•
Exposed and concealed mounting
models
•
Patented solid steel enclosed
housing and bend-resistant hook
assure long wear in heavy use
•
Extra-wide hook ensures roller
pick-up and overcomes alignment
problems
•
Life-cycle tested to operate reliably
even after a half-million closures.
Easily replaces any conventional
door closer
•
Perfect complement for Kason
Walk-in hinges and latches where
self-closing doors with controlled
closure are needed
1094 Concealed / Exposed
Mounting
CONCEALED
EXPOSED
1094S Dual-Speed
Hydraulic Door Closers
•
KASON WALK-IN HARDWARE
CONCEALED
1093 :: Hydraulic Door Closer
•
68
All the features of the 1094 Sure
Close, with the additional benefit
of a specially developed snubbing
mechanism. Initial fast closing
action allows unit to withstand
slamming force, while secondary,
slower action provides gradual
closing to lessen final impact
•
Material: Steel
•
Finish: Chrome
•
Cover: White plastic
•
Mounting: Holes drilled for
5.0mm (No. 10) screws
Quiet, efficient hydraulic closer
•
White plastic cover
•
Material: Heavy gauge steel
•
Can replace competitors’ models
•
Finish: Polished or brushed
chrome
•
Mounting: Holes drilled for
5.0mm (No. 10) screws
1093000004
Hydraulic Door Closer, Hook Offset: 0.0mm (Flush)
1093000008
Hydraulic Door Closer, Hook Offset: 28.6mm (1 1/8”)
Oxford Hardware Limited Tel: 01295 680068
EXPOSED
1094000002
Closer, Exposed Mounting, Brushed Chrome Finish
1094000003
Closer, Exposed Mounting, Polished Chrome Finish
1094000012
Closer, Concealed Mounting, Brushed Chrome Finish
1094000013
Closer, Concealed Mounting, Polished Chrome Finish
1094S00003
Dual Closer, Exposed Mounting, Polished Chrome Finish
1094S00012
Dual Closer, Concealed Mounting, Brushed Chrome Finish
1094S00013
Dual Closer, Concealed Mounting, Polished Chrome Finish
1094000024
Hook for 1094, Offset: 0.0mm (Flush),
Brushed Chrome Finish
1094000025
Hook for 1094, Offset: 0.0mm (Flush),
Polished Chrome Finish
1094000028
Hook for 1094, Offset: 28.6mm (1 1/8”),
Brushed Chrome Finish
1094000029
Hook for 1094, Offset: 28.6mm (1 1/8”),
Polished Chrome Finish
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
KASON :: Walk-in Hardware
556 :: Stainless Steel Latch
556CL5020.106
•
The Walk-In latch unsurpassed for
reliability, is now available for the
most challenging applications
•
Material: Polished, #316 stainless
steel body and strike housing with
#304 stainless steel roller
•
The 556 is the tough, stainless
steel model of the time tested 56
standard latch
•
Mounting: Holes drilled and
countersunk for 6.0mm (1/4”)
screws
•
The 556 features unequalled
strength and corrosion resistance
•
Tamper-resistant locking
mechanism and mounting are built
in
•
Bolt-type tongue has positive
locking action
•
Patented, adjustable roller strike
assures precise adjustment
Latches
556005002
556CL5020.106
Stainless Steel Padlocking Latch body, Light Spring,
with 106 key
Strikes
556005003
29/32”
23mm
556005004
2-1/6”
52.4mm
11-1/2”
280.4mm
3-3/8”
2-9/32”
85.7mm
2-9/16” 57.9mm
65.1mm
Stainless Steel Strike,
Flush: -3.0mm to 19mm (-1/8” to 3/4”)
556005003
Stainless Steel Strike,
Offset: 19.0mm to 41mm (3/4” to 1 5/8”)
556005004
Stainless Steel Strike,
Offset: 41.3mm to 63.5mm (1 5/8” to 2 1/2”)
2-1/8” 2-1/2”
54mm 63.5mm
1-5/32”
29.4mm
2”
50.8mm
3-3/8”
85.7mm
5-11/16”
144.6mm
7/8” CLEARANCE FOR I.S.R.
22.2mm
Oxford Hardware Limited Tel: 01295 680068
KASON WALK-IN HARDWARE
37/64”
14.7mm
556005002
Inside Release Handle
487A
Frost-Free Push Handle
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
69
KASON :: Walk-in Hardware
55 :: Heavy Duty Latch
•
Material: High pressure die-cast
zinc body and strike housing,
malleable iron handle, cold
rolled steel inside release paddle
assembly
•
Finish: See Order Information
•
Mounting: Holes drilled and
countersunk for 6.0mm (1/4”)
screws
This pioneering refrigeration equipment safety latch has been imitated but never
matched in rugged mechanical features and value
•
Designed to prevent accidental entrapment in walk-ins
•
Completely equipped with surface-mounted paddle-style inside release lever
•
Releases from outside or inside with minimum pressure or pull
•
So easy and convenient to use that employees have no reason to leave doors
ajar between loads
•
Patented Kason micro-adjustable strike assures precise adjustment
•
No. 55 bodies and strikes may be ordered separately
0055000020
Latch, Offset: 0mm to 4.8mm (Flush to 3/16”), Finish: Chrome
0055000024
Latch, Offset: 19.0mm to 28.6mm (3/4” to 1 1/8”), Finish: Chrome
0055000028
Latch, Offset: 28.6mm to 41.3mm (1 1/8” to 1 5/8”), Finish: Chrome
0550000032
Latch, Offset: 34.9mm to 47.6mm (1 3/8” to 1 7/8”), Finish: Chrome
0055000065
Latch, Offset: 0mm to 4.8mm (Flush to 3/16”), Finish: Tuffkote
0055000066
Latch, Offset: 19.0mm to 28.6mm (3/4” to 1 1/8”), Finish: Tuffkote
0055000068
Latch, Offset: 28.6mm to 41.3mm (1 1/8” to 1 5/8”), Finish: Tuffkote
•
Door Thickness: Plunger rod for
inside release handle fits 152.4mm
(6”) door. Specify other door
thickness
•
Spring Options: Specify
preference as follows: 55XL - Latch
with light spring. 55XXL - Latch
with extra-light spring; use with
Kason 486 or 489 push-type inside
release
Inside Release Handle
KASON WALK-IN HARDWARE
58 :: Radial Latch :: Medium / Heavy Duty
Roller Strike
•
70
•
For smooth, easy closure
order No. 59 Roller Strike
with No. 58 Latch Body
0059005001
Roller Strike, Offset -3.2mm to 6.4mm (-1/8” to 1/4”)
0059005002
Roller Strike, Offset 19mm to 38.1mm (3/4” to 1 1/2”)
0059005003
Roller Strike, Offset 44.5mm to 63.5mm (1 3/4” to 2 1/2”)
Oxford Hardware Limited Tel: 01295 680068
•
For medium to heavy duty use
•
Bolt-type tongue provides positive locking action
•
Proven, heavy-duty construction outlasts similar latches in hard commercial use
•
Patented Kason adjustable strike assures precise adjustment
•
Padlocking provision standard on all models
•
Unsurpassed for long life and reliability
•
Material: High pressure die-cast zinc body and strike housing, malleable iron
handle
•
Finish: See Order Information. Powder coated finish also available for severe
environmental applications
•
Mounting: Holes drilled and countersunk for 6.0mm (1/4”) screws
0058CH5020
Cylinder Locking Body, Heavy Spring
0058CL5020
Cylinder Locking Body, Light Spring
0058H05021
Body, Heavy Spring
0058L05021
Body, Light Spring
0058005001
Strike, Offset: -3.2mm to 6.4mm (-1/8” to 1/4”)
0058005002
Strike, Offset: 19.0mm to 38.1mm (3/4” to 1 1/2”)
0058005003
Strike, Offset: 44.5mm to 63.5mm (1 3/4” to 2 1/2”)
0058005310035K
Flat Bottomed Plate
(Does not accept Inside Release Handle)
Cylinder locks may be keyed alike or differently; 5 key changes available;
please specify.
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
KASON :: Walk-in Hardware
56 :: Heavy Duty Standard Latch
Latches
Latch, Cylinder Locking Body, Heavy Spring, Finish: Polished Chrome
0056CH6021
Latch, Cylinder Locking Body, Heavy Spring, Finish: Brushed Chrome
0056CH0086
Latch, Cylinder Locking Body, Heavy Spring, Finish: Tuffkote
0056CL5020
Latch, Cylinder Locking Body, Light Spring, Finish: Polished Chrome
0056CL6021
Latch, Cylinder Locking Body, Light Spring, Finish: Brushed Chrome
0056CL0086
Latch, Cylinder Locking Body, Light Spring, Finish: Tuffkote
0056CX5020
Latch, Cylinder Locking Body, Extra Light Spring, Finish: Polished Chrome
0056H05020
Latch, Padlocking Body, Heavy Spring, Finish: Polished Chrome
0056H06021
Latch, Padlocking Body, Heavy Spring, Finish: Brushed Chrome
0056L05020
Latch, Padlocking Body, Light Spring, Finish: Polished Chrome
0056L06021
Latch, Padlocking Body, Light Spring, Finish: Brushed Chrome
0056L00086
Latch, Padlocking Body, Light Spring, Finish: Tuffkote
0056XL5020
Latch, Padlocking Body, Extra Light Spring, Finish: Polished Chrome
0056XL6021
Latch, Padlocking Body, Extra Light Spring, Finish: Brushed Chrome
0056XL0086
Latch, Padlocking Body, Extra Light Spring, Finish: Tuffkote
KASON WALK-IN HARDWARE
0056CH5020
Strikes
•
For heavy duty use
•
Bolt-type tongue provides positive
locking action
•
Proven, heavy-duty construction outlasts
similar latches in hard commercial use
•
Patented Kason adjustable strike assures
precise adjustment
•
Padlocking provision standard on all
models
•
Unsurpassed for long life and reliability
•
Material: High pressure die-cast zinc
body and strike housing, malleable iron
handle
•
Finish: See Order Information. Powder
coated finish also available for severe
environmental applications
•
Mounting: Holes drilled and
countersunk for 6.0mm (1/4”) screws
Oxford Hardware Limited Tel: 01295 680068
0056005002
Strike, Offset: -3.2mm to 6.4mm (-1/8” to 1/4”), Finish: Polished Chrome
0056005003
Strike, Offset: 19.0mm to 38.1mm (3/4” to 1 1/2”), Finish: Polished Chrome
0056005005
Strike, Offset: 44.5mm to 63.5mm (1 3/4” to 2 1/2”), Finish: Polished Chrome
0056005008
Strike, Offset: 76.2mm to 101.6mm (3” to 4”), Finish: Polished Chrome
0056006002
Strike, Offset: -3.2mm to 6.4mm (-1/8” to 1/4”), Finish: Brushed Chrome
0056006003
Strike, Offset: 19.0mm to 38.1mm (3/4” to 1 1/2”), Finish: Brushed Chrome
0056006005
Strike, Offset: 44.5mm to 63.5mm (1 3/4” to 2 1/2”), Finish: Brushed Chrome
0056006008
Strike, Offset: 76.2mm to 101.6mm (3” to 4”), Finish: Brushed Chrome
005600T002
Strike, Offset: -3.2mm to 6.4mm (-1/8” to 1/4”), Finish: Tuffkote
005600T003
Strike, Offset: 19.0mm to 38.1mm (3/4” to 1 1/2”), Finish: Tuffkote
005600T005
Strike, Offset: 44.5mm to 63.5mm (1 3/4” to 2 1/2”), Finish: Tuffkote
Lock
0056CM0004
Cylinder Kit for 56C Models
Cylinder locks may be keyed alike or differently; 5 key changes available; please specify.
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
71
KASON :: Walk-in Hardware
New
Stainless Steel KASON Hardware
556 :: Stainless Steel Latch
See Page
69
KASON WALK-IN HARDWARE
1377S :: Stainless Steel Self-Closing Hinge
See Page
67
1341 :: Stainless Steel Double Knuckle Hinge
See Page
66
72
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
KASON :: Walk-in Hardware
Inside Release Handles
Inside Release Handles :: Recessed
•
Required with walk-in latches
•
Use the convenient tables in the “How To…” section on this page to choose and
order the correct inside handle for each Kason latch selected
•
See selection chart below
481 :: Safety-Glow™ Push Handle
•
Glow-in-the-dark knob is always
visible
•
Material: Steel rod and flange;
Safety-GlowTM plastic knob
•
Finish: Kasonized
•
Mounting: Holes drilled for
5.0mm (No. 10) screws
•
Material: Kasonized steel rod,
plastic recessed housing, SafetyGlow™ plastic knob
•
Option: No.s 486 and 489
available with frost-resistant
fiberglass rods
•
Mounting: Holes drilled for
5.0mm (No. 10) screws
486 :: Wide Recessed Handle
482 :: Hi-Temp Push Handle
•
Provided with steel rod and
tough iron knob for high heat
applications
•
Material: Steel rod and flange;
iron knob
•
Finish: Kasonized
•
Mounting: Holes drilled for
5.0mm (No. 10) screws
•
Furnished with low-conduction
fibreglass rod for low-temp
applications
•
Material: Fibreglass rod, plastic
flange; Safety-Glow™ plastic knob
•
Mounting: Holes drilled for
5.0mm (No. 10) screws
•
Material: Steel
•
Finish:Kasonized
•
Mounting: Holes drilled for
5.5mm (No. 12) screws
487 :: Frost-Free Push Handle
KASON WALK-IN HARDWARE
489 :: Narrow Recessed Handle
483 :: Paddle Handle
CAUTION:
Proper selection and installation of Kason inside release handles can prevent entrapment inside coolers, freezers and other walk-in units when used with the
appropriate Kason latches. Please select carefully for your application and use only as directed.
How To Select and Order Inside Release Handles
1
From Table A choose the appropriate inside release handle for each latch.
2
Refer to Table B for minimum door thickness required for each inside release model.
3
Specify exact thickness of your door. We will use this information to convert
your requirements into our part numbers.
Table A :: Select by Latch Suitabilty
Table B :: Select by Door Thickness
Minimum Door Thickness
Inside Release Handles
38.1mm (1 1/2”)
481C, 482C, 483, 487C
63.5mm (2 1/2”)
481A, 482A, 487A
68.3mm (2 11/16”)
486D
69.9mm (2 3/4”)
489D
Latches
Inside Release Handles
76.2mm (3”)
481B, 482B, 486B, 486C, 487B
55XXL
486D, 489D
82.6mm (3 1/4”)
489B, 489C
56
483, 481A,482A, 486A, 487A, 489A
95.3mm (3 3/4”)
486A
58
481C, 482C, 486C, 487C, 489C
101.6mm (4”)
489A
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
73
KASON :: Walk-in Hardware
0160 :: Two-point Bolt-action Latch
0167 :: Slam and Take-up Latch
•
Bolt action Latch
•
For medium and heavy duty doors
•
Material: Steel
•
Material: Steel
•
Maximum Projection: 25.4mm
(1”)
•
Maximum Projection: 38.1mm (1
1/2”)
•
Latch: Consists of one centre
mechanism, 2 end points and rod
guides
•
Latch: Consists of one centre
mechanism, 2 end points and rod
guides
•
Rods: 12.7mm (1/2”) diameter
steel rods (850mm (2’ 9 15/32”)
available, please order separately
•
Rods: 12.7mm (1/2”) diameter
steel rods (850mm (2’ 9 15/32”)
available, please order separately
•
Mounting: Holes drilled and
countersunk for 5.5mm (No. 12)
screws
•
Mounting: Holes drilled and
countersunk for 5.5mm (No. 12)
screws
•
Other: Centre mechanism
available separately
•
Other: Centre mechanisms,
end points and rods available
separately
KASON WALK-IN HARDWARE
0160
74
Two Point Latch
Oxford Hardware Limited Tel: 01295 680068
0167
Slam and Take-up Latch
0167S
Strike Plate
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
KASON :: Walk-in Hardware
Trapped Person Alarm
•
Trapped-persons alarm for Walk-In chill/freezer rooms manufactured in accordance to EN378-1 (formerly BS4434)
Trapped Person Alarm :: Complete Kit
+
TPA1 Push Button
+
TPA2
Sign
+
TPA3
Battery
TPACOMPLETE
Push Button (TPA1), Sign (TPA2) and Battery (TPA3)
TPA4
Optional Satellite Siren Box
Internal Push-Button
TPA4
Siren (Optional)
External Battery Box with Battery Charger
Emergency Push-Button station with
key, built-in light source (diodes)
•
The Push-Button station must be
installed adjacent to the Freezer
Room Door, if possible close to
the Internal Door Handle. In larger
Freezer Rooms additional PushButton stations must be installed
every 10 metres
•
•
As the built-in light source is
connected to the battery it will
continue to glow for 10 hours after
mains power failure
•
Battery box containing one 12V
DC battery, battery charger, siren
and lamp for activated signal.
The battery box contains clear
instructions for action in the case of
emergency
•
Power: 240V AC - connection to
own fuse
•
Siren: 80dB at 1 meter, 5-12V DC
•
Lamp: Red blinking, 5-12V DC
•
Protection: IP65
KASON WALK-IN HARDWARE
•
Push-button’s construction and
colour is in accordance with
DS/EN1838 and DS/EN734.1
TPA3
TPA1
External Battery Box with Battery
Charger
Internal Push-Button
Sign
Satellite Siren Box
•
Sign with emergency instructions
•
The Sign must be installed
next/above/below the
Internal Push-Button
•
The sign’s construction and colour
is in accordance with DS/EN1838
and DS/EN734.1
•
Can be installed in for example
nearby offices or canteens to
ensure that an activated signal can
be heard
•
The Satellite siren box requires
connection to a complete alarm
system
TPA2
TPA4
Sign, for Push-Button
Satellite Siren Box
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
75
KASON :: Walk-in Hardware
1830 Series :: Ventilator Ports
1830
•
Improved to increase airflow for easier opening and closing
•
Protects from structural damage because of temperature/pressure build up
•
Compensates for air expansion and contraction
•
Heated models available for freezer applications
•
Material: Body - All metal parts are aluminium. Internal sleeve - selfextinguishing Lexan
•
UL Listing: File No. E57306
•
Diameter: See ordering information
•
Length: Standard for 101.6mm (4”) wall thickness; other lengths available.
Specify exact wall thickness; we will convert to our part number
•
Mounting: May be mounted through wall or ceiling. Drilled for 4.0mm (No. 8)
screws
•
Electrical Requirements: See ordering information
Comprehensive performance testing has shown that Kason 1830 Series ventilators
have better air flow and frost resistance than competitively sized units.
1830 :: Heated 4” Vent
•
129.4mm (5 3/32”) diameter round aluminium cover plate
1830000004
Heated Vent, 23W, 0.2A @ 115VAC
1830000008
Heated Vent, 23W, 0.1A @ 220VAC
1830000016
Heated Vent, 20W, 0.8A @ 24VAC
1834 :: Non-Heated 4”Vent
KASON WALK-IN HARDWARE
•
1834000004
Non-Heated Vent
1832 :: Hi-Flow Heated 6” Vent
•
A
B*
C
1830
129.4mm (5 3/2”)
101.6mm (4”)
88.9mm (3 1/2”)
1834
129.4mm (5 3/2”)
101.6mm (4”)
88.9mm (3 1/2”)
1832
165.1mm (6 1/4”)
101.6mm (4”)
117.5mm (4 5/8”)
1836
165.1mm (6 1/4”)
101.6mm (4”)
117.5mm (4 5/8”)
*Other lengths available. Please Specify.
These ventilators are for a 101.6mm (4”) thick wall. When other
length is required, specify exact wall thickness. We will convert
your individual requirement into our part number.
1825/1830 Series Ventilator Quantity Selector
Size of Cooler (ft) Volume of Cooler
Number of Ventilators Required
(cubic ft)
-17.8°C to -12.2°C (0°F to 10°F)
-34°C to -17.8°C (-30°F to 0°F)
1830
1832
1830
1832
5x5x7
175
1
1
1
1
10x10x7
700
1
1
1
1
15x15x7
1575
1
1
1
1
20x20x7
2800
1
1
2
1
25x25x7
4375
2
1
3
2
30x30x7
6300
2
1
3
2
35x35x7
8575
2
1
3
2
40x40x7
11200
3
2
4
2
45x45x7
14175
3
2
4
2
50x50x7
17500
4
2
5
3
55x55x7
21175
4
2
6
3
60x60x7
25200
5
3
7
4
76
Same as 1830, except without heating element
Oxford Hardware Limited Tel: 01295 680068
165.1mm (6 1/4”) diameter round aluminium
cover plate or square stainless steel or aluminium
cover plate available
Square aluminium or stainless steel louvred cover plate,
complete with gasket, available for models 1832 and 1836
183200000806
Heated Vent, 23W, 0.1A @ 220VAC
1832000004
Heated Vent, 23W, 0.2A @ 115VAC
1832000016
Heated Vent, 20W, 0.8A @ 24VAC
1832SA0004
Heated Vent w/Square Aluminium Louvre, 115VAC
1832SS0004
Heated Vent w/Square Stainless Steel Louvre, 115VAC
1832SA0001
Square Aluminium Louvre for 1832 Vent
1832SS0001
Square Stainless Steel Louvre for 1832 Vent
1836 :: Hi-Flow Non-Heated 6” Vent
•
Same as 1832, except without heating element
1836000004
Non-Heated Vent
1836SA0001
Non-Heated Vent w/Square Aluminium Louvre, 115VAC
1836SS0001
Non-Heated Vent w/Square Stainless Steel Louvre, 115VAC
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
KASON :: Walk-in Hardware
Panel Fastener :: 1156A & B Locking Points
1156A
•
•
1156A00002
Typical application for tongue and
groove rails where fasteners are
nailed or stapled to rails
Housing designed to resist
spreading in high density foam rails
under heavy loading
Rigid Rail Locking Point
1156B
Same as No. 1156A, except with
9.5mm (3/8”) additional hook
reach; for use with butt joint panels
or thick rails
•
Kason’s unbreakable panel fastener strikes will not let go even under the most
severe conditions
•
Engineered to be the best for use in rigid rail systems, they specifically resist
spreading, which can cause other types of rigid rail strikes to pop open
•
The Kason No.1155 actually gets stronger the harder it is pulled
•
Flange-mounted enclosed strikes eliminate the need to drill a hole for pins
•
Large flanges help spread the load when used on soft materials
•
Available in pin-to-flange offsets to suit a wide variety of rail thicknesses
•
Centerline mark provided for easy positioning
1155000437
Strike, Offset: 11mm (7/16”), Width : 54mm (2 1/8”)
1155000500
Strike, Offset: 13mm (1/2”), Width : 51mm (2”)
1155000625
Strike, Offset: 16mm (5/8”), Width : 44mm (1 3/4”)
1155000688
Strike, Offset: 18mm (11/16”), Width : 41mm (1 5/8”)
1155000750
Strike, Offset: 19mm (3/4”), Width : 38mm (1 1/2”)
1155000812
Strike, Offset: 21mm (13/16”), Width : 35mm (1 3/8”)
1155001125*
Strike, Offset: 29mm (1 1/8”), Width : 38mm (1 1/2”)
*Different style than that pictured
Snap-In Finish Caps
KASON WALK-IN HARDWARE
•
1155 :: Strike
1138 Finish Cap
1156B00004
•
Used to cover wrench hole borings
•
Material: Polyethylene
•
Finish: Opaque white or grey
•
Size: 19.0mm (3/4”) diameter
Rigid Rail Locking Point
1147 Finish Cap
1145 :: Hex Wrench
•
Material: Brass
•
Material: Steel or hardened steel
•
Finish: Chrome
•
Size: 152.4mm x 152.44mm
(6” x 6”)
•
Size: 12.7mm (1/2”) diameter
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
77
KASON :: Walk-in Hardware
Foamed-In-Place Panel Fasteners
•
Ideal for prefabricated foaminsulation panel
•
High impact polystyrene housing
provides exceptional strength
•
Kason’s time-tested, high strength
steel hook and pin with die-cast
cam ensure precision locking
•
Pull-out strength tested to 291kg
•
Slotted wings permit maximum flow
of foam
•
Jig fixing holes and pins assure
correct fit
•
Material: High impact styrene
housings, 3mm (1/8”) steel hook,
die-cast cam
•
Dimensions: Fixing Centres
- 122mm, Fixing Hole Diameter
- 8mm / 10mm, Extended Hook
- 39mm, Retracted Hook - 28mm
•
For use in 73mm, 100mm and
150mm panels
1172 Panel Fasteners
1172000010
Hook Assembly
1172000014
Strike Assembly
KASON WALK-IN HARDWARE
1174 Panel Fasteners
•
Use in narrower wall panels and
ceiling panels where space is
restricted
1174000010
Hook Assembly
1174000014
Strike Assembly
Jig Pins
•
Each Pin is machined differently to ensure accurate fastener mounting
•
See ordering table for correct usage
K100
78
K200
K300
K100000000
Jig Pin for 1172/1174 Strike
K200000000
Jig Pin for 1172/1174 Hook
K300000000
Jig Pin for 1172/1174 Hook
K400000000
Jig Pin for 1172/1174 Strike
K400
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
Cold Room
Hardware
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
79
Cold
Cold Room
RoomHardware
Hardware
The Complete COLD ROOM PACKAGE
NEW cold room sliding door track system
• Reduced cost: Competitively priced system
• Reduced Inventory: One style of track takes up to 160kg door and no lift handle required
for door weights up to 120kg
• Reduced installation time: Simple assembly can give 50% time saving
• Reduced spares requirement: Robust all steel construction minimises breakages
• Comprehensive range of complimentary cold room hardware
• Design service available for special applications
COLD ROOM HARDWARE
80
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
Cold Room Hardware
Cold Room Sliding Door Gear
•
Strong construction
•
Door thickness from 60mm
•
Quick and easy installation
•
Door weight up to 160kg
•
•
Cut track to length or ask for
specific requirements
•
Suits positive or negative
coldrooms
70mm diameter rollers for easy
operation
•
Stainless steel fasteners
•
Also available in stainless steel
•
•
•
Fast and easy assembly
Optional track and bracket cover
plates available
•
Door width up to 2500mm
•
Easy to install
Drop in closing action gives
hermetic seal
Simple adjustment
•
One tool adjusts whole system
•
Track reversible to suit left or right
hand
•
Recessed handle can be screwed
or glued in place
•
Option for stainless steel grip
•
Pre-drilled aluminium floor guide
rail
•
Gasket retainer with clip on cover
plate
•
No visible fixing screws
•
Gasket system can save up to
50mm on door width
•
Moulded black composite floor guide
•
M12 fixing bolts plus third hole for locking position
Complete Sliding Door Gear :: Stainless Steel
923-100-0900-01
Sliding Door Gear: 900mm Max door width
923-200-0900-01
Sliding Door Gear: 900mm Max door width
923-100-1050-01
Sliding Door Gear: 1050mm Max door width
923-200-1050-01
Sliding Door Gear: 1050mm Max door width
923-100-1300-01
Sliding Door Gear: 1300mm Max door width
923-200-1300-01
Sliding Door Gear: 1300mm Max door width
923-100-1500-01
Sliding Door Gear: 1500mm Max door width
923-200-1500-01
Sliding Door Gear: 1500mm Max door width
923-100-1700-01
Sliding Door Gear: 1700mm Max door width
923-200-1700-01
Sliding Door Gear: 1700mm Max door width
923-100-2100-01
Sliding Door Gear: 2100mm Max door width
923-200-2100-01
Sliding Door Gear: 2100mm Max door width
923-100-2500-01
Sliding Door Gear: 2500mm Max door width
923-200-2500-01
Sliding Door Gear: 2500mm Max door width
Oxford Hardware Limited Tel: 01295 680068
COLD ROOM HARDWARE
Complete Sliding Door Gear :: Painted
•
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
81
Cold Room Hardware
Cold Room Sliding Door Gear :: SPARES
Rail (1), Ramp Track (2) & Ramp :: Composite (2)
Door Runners (2)
Image shows Painted
Rail with Ramp Track
and Composite Ramp
attached
923-101-06
Body with M16 stud - painted
923-201-06
Body with M16 stud - stainless steel
923-101-07
Wheel
923-101-08
Door Stop - RH - painted
923-101-09
Door Stop - LH - painted
923-201-08
Door Stop - RH - stainless steel
923-201-09
Door Stop - LH - stainless steel
Door Stops (2)
Rail :: Painted (1)
923-101-1050-01
Rail: 1050mm Max door width
923-101-1300-01
Rail: 1300mm Max door width
923-101-1500-01
Rail: 1500mm Max door width
923-101-1700-01
Rail: 1700mm Max door width
923-101-2100-01
Rail: 2100mm Max door width
Door Support Arms (2)
Handles (2)
OR
Rail :: Stainless Steel (1)
923-201-1050-01
Rail: 1050mm Max door width
923-201-1300-01
Rail: 1300mm Max door width
923-201-1500-01
Rail: 1500mm Max door width
923-201-1700-01
Rail: 1700mm Max door width
923-201-2100-01
Rail: 2100mm Max door width
923-101-11
Door Support Arm - painted
923-201-11
Door Support Arm - stainless steel
COLD ROOM HARDWARE
Ramp Track: 1050mm Max door width
923-101-1300-02
Ramp Track: 1300mm Max door width
923-101-1500-02
Ramp Track: 1500mm Max door width
923-101-1700-02
Ramp Track: 1700mm Max door width
923-101-2100-02
Ramp Track: 2100mm Max door width
Rail End Covers (2)
923-101-16
Support Arm Cover
Ramp :: Composite (2)
Ramp - composite
923-101-1050-03
Guide Rail: 1050mm Max door width
923-101-1300-03
Guide Rail: 1300mm Max door width
923-101-1500-03
Guide Rail: 1500mm Max door width
923-101-1700-03
Guide Rail: 1700mm Max door width
923-101-2100-03
Guide Rail: 2100mm Max door width
Rail Mounting Brackets (3)
Bracket with M10 stud
Oxford Hardware Limited Tel: 01295 680068
923-101-17
Rail End Cover
Composite Shoes (1 of Each)
Guide Rail (1) :: Anodised Aluminium
82
923-101-12
Handle - plastic 150 x 95mm
Support Arm Covers (2)
923-101-1050-02
923-101-05
923-201-13
923-201-13
Handle (Optional) stainless steel grip pin
Ramp Track :: Aluminium (2)
923-101-04
923-101-12
Front
Rear
923-101-14
Front Shoe
923-201-15
Rear Shoe
923-101-25
4 x M8 Nuts
923-101-26
4 x M8
Flat Washers
Fastener Kit (1)
923-101-20
4 x M16
Flat Washers
923-101-21
4 x M16 Nuts
923-101-22
2 x Cover Plugs
923-101-27
4 x M8 Bolts
923-101-23
3 x M10
Nyloc Nuts
923-101-28
2 x 5mm
Self Tapping
923-101-24
3 x M10 Washers
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
Cold Room Hardware
Internal Lever Off Handle
External Lever Off Handle
•
For use with sliding doors
•
•
Right and left hand option
•
Stainless steel handle
•
Stainless steel handle
•
Moulded composite pivot
•
For door thicknesses over 70mm
•
For door thicknesses over 70mm
•
Material: Stainless steel /
composite
•
Material: Stainless steel /
composite
923-8-1001
RH Internal Handle
923-8-1002
LH Internal Handle
For use with sliding doors, LH or RH
923-8-1003
External Handle
Euro 2000 Cold Room Latch
•
Modern design
•
Inside release handle
Black outside housing
•
Green inside housing
•
Any RAL colour on request
(for 500+ pieces)
•
Outside and inside handle
stainless steel
•
Profile cylinder lock
•
Kaba cylinder optional
•
For right and left hand use
•
Can accomodate all door
thicknesses
•
Easy assembly
•
Positive closing action
COLD ROOM HARDWARE
•
3.31.0760.0
3.31.0765.0
3.31.2000.1
Latch, Door Thickness: 80mm
3.31.2010.1
Latch, Door Thickness: 100mm
3.31.2011.1
Latch, Door Thickness: 120mm
3.31.0760.0
Plastic Strike 11mm
3.31.2012.1
Latch, Door Thickness: 140mm
3.31.0765.0
Plastic Strike 18mm
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
83
Cold Room Hardware
Cold Room Latch
•
Latch for cold room doors
•
Suitable for door thickness of 40 - 200mm
•
Universal handle
•
Inside release handle
•
Fast and easy assembly
•
Material: Nylon PA 50% glass filled
923-4-1040
Latch, Door Thickness: 40mm
923-4-1060
Latch, Door Thickness: 60mm
923-4-1080
Latch, Door Thickness: 80mm
923-4-1100
Latch, Door Thickness: 100mm
923-4-1120
Latch, Door Thickness: 120mm
Night & Day Latch
•
Slam action latch with positive
locking facility
•
Can be linked to a multiple locking
system
•
Door can be opened or closed
without turning the handle
•
Robust composite construction
•
Black outer handle
Visual Indication when locked/
unlocked
•
Green inner handle
•
Profile cylinder lock
•
COLD ROOM HARDWARE
Inside
Positively Locked
Day
Inside
Slam Latch Action
Night
Outside
Slam Latch Action
Day
Outside
Positively Locked
Night
3.31.2700.2
LH Latch, Door Thickness: 80mm
3.31.2700.1
RH Latch, Door Thickness: 80mm
3.31.2702.2
LH Latch, Door Thickness: 90mm
3.31.2702.1
RH Latch, Door Thickness: 90mm
3.31.2704.2
LH Latch, Door Thickness: 100mm
3.31.2704.1
RH Latch, Door Thickness: 100mm
3.31.2706.2
LH Latch, Door Thickness: 120mm
3.31.2706.1
RH Latch, Door Thickness: 120mm
3.31.2707.2
LH Latch, Door Thickness: 125mm
3.31.2707.1
RH Latch, Door Thickness: 125mm
3.31.2708.2
LH Latch, Door Thickness: 140mm
3.31.2708.1
RH Latch, Door Thickness: 140mm
3.31.0766.0
Strike, Material: Black Polyamide, 11mm
Strike
3.31.0768.0
Strike, Material: Black Polyamide, 18mm
3.31.0766.0 and 3.31.0768.0
3.31.2795.0
Distance Plate, Material: Green Plastic, 5mm
3.31.2796.0
Distance Plate, Material: Green Plastic, 10mm
3.31.2797.0
Distance Plate, Material: Green Plastic, 15mm
Distance Plate
3.31.2795.0
84
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
Cold Room Hardware
Varioflex Edgemount Hinge
Medium Composite Edemount Hinge
•
Hinge for offset and semi-rebated
doors
•
Composite hinge for overlapping
doors
•
Holds open at 180°
•
180° door opening
•
Left or right hand fixing
•
Left or right hand fixing
•
Lift-off style
•
•
Zinc die cast body
Hidden M5 screw fixings for
security
•
Up to 80kg door weight
•
25kg loading per pair
•
Up to 2 x 1m door size
•
Optional 8mm spacer
•
Up to 8mm height adjustment
•
Optional self-closing spring
•
Optional 5mm ABS spacer
Pin
Cover
Spacer
Hinge
Spacer
Edgemount Hinge, Rising, Finish: EPS Grey Coated
3.51.1010.0
Edgemount Hinge, Non-Rising, Finish: EPS Grey Coated
3.51.1001.0
Edgemount Hinge, Rising, Finish: EPS Black Coated
3.51.1011.0
Edgemount Hinge, Non-Rising, Finish: EPS Black Coated
3.51.1008.0
Edgemount Hinge, Rising, Finish: Matt Chromium Plated
3.51.1018.0
Edgemount Hinge, Non-Rising, Finish: Matt Chromium Plated
3.51.1100.0
Edgemount Hinge, Rising with Spring, Finish: EPS Grey Coated
3.51.1101.0
Edgemount Hinge, Rising with Spring, Finish: EPS Black Coated
3.51.1108.0
Edgemount Hinge, Rising with Spring, Matt Chromium Plated
3.51.1080.0
Spacer, Material: ABS Grey
3.51.1081.0
Spacer, Material: ABS Black
Composite
Collar
Hinge Base
923-1006
Edgemount Hinge, Non-Rising, Steel Zinc Plate Pin
923-1007
Spacer
Large Composite Edgemount Hinge
COLD ROOM HARDWARE
3.51.1000.0
FEATURES
•
Composite hinge for overlapping doors
•
Rising and Non-Rising options
•
180° door opening
•
Left or right hand fixing
•
Hidden screw fixings for security
•
80kg loading per pair
•
Optional 9mm spacer
Non-Rising
923-1001
Edgemount Hinge, Non-Rising, Steel Zinc Plate Pin
923-1002
Edgemount Hinge, Non-Rising, Stainless Steel Pin
923-1003
Edgemount Hinge, Rising, Steel Zinc Plate Pin
923-1004
Edgemount Hinge, Rising, Stainless Steel Pin
923-1005
Spacer
Oxford Hardware Limited Tel: 01295 680068
Without Spacer
Fax: 01295 688123 Email: [email protected]
Rising
With Spacer
Web: www.oxfordhardware.co.uk
85
Cold Room Hardware
Hasp & Staple :: For Slam & Sliding Doors
•
Safety padlocking device
•
With red inside release handle
•
Grey nylon finish
•
When ordering: state left hand or
right hand
•
Nylon rod supplied in standard 12”
length
•
Specify if greater length required
60 RH
Hasp and Staple Assembly for RH Hinged Doors, c/w Nylon Rod
61 LH
Hasp and Staple Assembly for LH Hinged Doors, c/w Nylon Rod
Hasp & Staple :: For Sliding Doors
COLD ROOM HARDWARE
•
Safety padlocking device
•
When not engaged will drop flat
•
With red inside release handle
•
Grey nylon finish
•
Nylon rod supplied in standard 12” length
•
Specify if greater length required
62
86
Hasp and Staple Assembly, c/w Nylon Rod
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
Gaskets &
Sweepers
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
87
Gaskets & Sweepers
Order
Order Form
Form For
For
Pre-Formed
Pre-Formed Gaskets
Gaskets
YOUR GASKET ORDER CAN ONLY BE PROCESSED ON RECEIPT OF THIS ORDER FORM
Please photocopy this form or print from our website www.oxfordhardware/gasketorder.pdf
Thank you for your interest in our pre-formed gasket. The delivery time is normally 3-4 weeks.
Please complete this form and return it by fax/post/scan & email to Oxford Hardware.
Ordered gaskets are NON-RETURNABLE and NON-REFUNDABLE
Pre-Payment is required for non-account holders
Pre-Payment is required for non-account holders
COMPANY NAME: ……………………………………………………………………………………………………………………
COMPANY NAME:
Order No: ……………………………………………………………………………………………………………………………….
Order No:
Is the gasket 4-sided? ……………………………..
Is
ORthe gasket 4-sided?
OR
Is the gasket 3-sided? .................................... If so SEND A SKETCH
Is the gasket 3-sided?
External measurements (ONLY for gaskets fixed by strip, pop-rivet, self-tap, screw)
External
measurements
Specify metric
measurements (mm):Specify metric measurements (mm):Gasket Code: ……………….
Gasket Code: ……………………
Gasket Code: ……………….
Height: ………………………..
Height: …………………………….
Height: ………………………..
Width: …………………………
Width: ……………………………..
Width: …………………………
GASKETS & SWEEPERS
No. of Gaskets: …………..
No. of Gaskets: ………………..
No. of Gaskets: ……………
OR
OR
Measurements from the centreline of the fixing slot/arrow (ONLY for push-in/arrow head gasket)
Measurements
from the centreline
of the fixing slot/arrow
Specify metric measurements
(mm):Specify metric measurements (mm):Gasket Code: ……………….
Gasket Code: ……………………
Gasket Code: ……………….
Height: ………………………..
Height: …………………………….
Height: ………………………..
Width: …………………………
Width: ……………………………..
Width: …………………………
No. of Gaskets: …………..
No. of Gaskets: ………………..
No. of Gaskets: ……………
------------------------------------------------------------------------------------------------------------------------------------------------------------------Signed: ……………………………..
Name: ……………………………………
Date: ……………………………….
Signed: ……………………………..
Name: ……………………………………
Date: ……………………………….
------------------------------------------------------------------------------------------------------------------------------------------------------------------YOUR GASKET ORDER CAN ONLY BE PROCESSED ON RECEIPT OF THIS ORDER FORM
88
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
Gaskets & Sweepers
Refrigeration Gaskets :: Compression
Sizes as shown - supplied in 25m lengths
Gaskets can also be made to size
Material: Grey PVC. Operating temperature -18°C to +65°C
PLEASE NOTE Pre-formed gasket orders will only be accepted with a completed order form (page 88)
Not available pre-formed
Supplied in 20m lengths
Reversible
CG-2
CG-3
CG-4/EO
CG-5
CG-6
CG-7
CG-8
Not available pre-formed
Not available pre-formed
CG-14/EO
CG-15/EO
GASKETS & SWEEPERS
CG-1
CG-9
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
SF0553
Web: www.oxfordhardware.co.uk
89
Gaskets & Sweepers
Refrigeration Gaskets :: Magnetic
Sizes as shown - supplied in 3m lengths
Gaskets can also be made to size
Material: Grey PVC. Operating temperature -18°C to +65°C
PLEASE NOTE Pre-formed gasket orders will only be accepted with a completed order form (page 88)
Reversible
MG-1
Magnet: 8 x 3.5mm
MG-2
Magnet: 8 x 3.5mm
MG-3
Magnet: 8 x 3.5mm
MG-4
Magnet: 8 x 3.5mm
MG-7A forms the hinge side of the
seal/gasket, where the other three
sides use MG-7
Magnet: 8 x 3.5mm
MG-6
Magnet: 8 x 3.5mm
MG-7
Magnet: 8 x 3.5mm
MG-8
Magnet: 9.8 x 3.1mm
MG-9
Magnet: 8 x 3.5mm
MG-10
Magnet: 9.8 x 3.1mm
MG-7A
GASKETS & SWEEPERS
MG-5
90
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
MG-11
Magnet: 8 x 3.5mm
Web: www.oxfordhardware.co.uk
Gaskets & Sweepers
Refrigeration Gaskets :: Magnetic (continued)
Sizes as shown - supplied in 3m lengths
Gaskets can also be made to size
Material: Grey PVC. Operating temperature -18°C to +65°C
PLEASE NOTE Pre-formed gasket orders will only be accepted with a completed order form (page 88)
MG12A forms the hinge
side of a seal/gasket,
where the other three sides use MG12
Incorporates Tri-Pole Magnet
MG-12A
MG-13
Magnet: 9.8 x 3.5mm
MG-15
Magnet: 9.8 x 3.1mm
MG-16
Magnet: 9.8 x 3.1mm
MG-17
Magnet: 8 x 3.5mm
MG-19
Magnet: 8 x 3.1mm
MG-20
Magnet: 8 x 3.5mm
MG-22
Magnet: 8 x 3.5mm
MG-14
Magnet: 9.8 x 3.1mm
MG-18
Magnet: 9.8 x 3.1mm
GASKETS & SWEEPERS
MG-12
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
91
Gaskets & Sweepers
Refrigeration Gaskets
Sizes as shown - supplied in 2.5m lengths
KEY
Gaskets can also be made to size
W
G
Br
Bl
White
Grey
Brown
Black
GASKETS & SWEEPERS
15-M
W
19-M
W
35-R
W
G
Bl
Material: PVC. Operating temperature -18°C to +65°C
15-R
W
18-M
W
25-M
W
25-R
45-M
W
45-R
G
Br
Bl
18-R
W
W
35-M
W
W
100-M
W
PLEASE NOTE Pre-formed gasket orders will only be accepted with a completed order form (page 88)
92
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
Gaskets & Sweepers
Refrigeration Gaskets
Sizes as shown - supplied in 2.5m lengths
KEY
Gaskets can also be made to size
W
G
Br
Bl
White
Grey
Brown
Black
W
39-M
W
46-M
W
16-R
W
26-M
W
56-M
W
66-M
W
26-R
W
121-M
W
GASKETS & SWEEPERS
16-M
Material: PVC. Operating temperature -18°C to +65°C
Br
G
PLEASE NOTE Pre-formed gasket orders will only be accepted with a completed order form (page 88)
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
93
Gaskets & Sweepers
Refrigeration Gaskets
Sizes as shown - supplied in 2.5m lengths
KEY
30-M
Gaskets can also be made to size
W
G
Br
Bl
White
Grey
Brown
Black
W
33-M
G
W
34-M
W
71-M
W
31-M
G
Bl
W
32-M
G
G
37-M
G
38-M
72-M
G
73-M
76-M
G
195-M
GASKETS & SWEEPERS
30-R
Material: PVC. Operating temperature -18°C to +65°C
70-M
74-M
Bl
W
75-M
G
Bl
W
PLEASE NOTE Pre-formed gasket orders will only be accepted with a completed order form (page 88)
94
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
Gaskets & Sweepers
Refrigeration Gaskets
Sizes as shown
KEY
Gaskets can also be made to size
W
G
Br
Bl
White
Grey
Brown
Black
2.5m lengths
20-A
W
2.5m lengths
Bl
21-A
Roll length (max 25m)
42-A
Material: PVC. Operating temperature -18°C to +65°C
W
Roll length (max 25m)
Bl
40-A
2.5m lengths
G
78-M
G
Roll length (max 25m)
Bl
41-A
Bl
2.5m lengths
79-M
W
Sizes as shown - supplied in 4m lengths
Gaskets can also be made to size
Material: Grey Vinyl latex. Operating temperature -40°F to +150°F (-40°C to +65°C)
9771
GASKETS & SWEEPERS
Refrigeration Gaskets :: Vinyl latex
9772
PLEASE NOTE Pre-formed gasket orders will only be accepted with a completed order form (page 88)
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
95
Gaskets & Sweepers
Refrigeration Gaskets
Sizes as shown - supplied in 2.5m lengths
KEY
Gaskets can also be made to size
W
G
Br
Bl
White
Grey
Brown
Black
Material: PVC. Operating temperature -18°C to +65°C
Not available pre-formed
4-A
G
5-A
G
6-A
10-A
W
9-A
G
45-A
W
102-A
G
169-A
G
W
7-A
G
19-A
W
138-A
W
GASKETS & SWEEPERS
8-A
G
158-A
G
Br
Bl
104-A
G
PLEASE NOTE Pre-formed gasket orders will only be accepted with a completed order form (page 88)
96
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
Gaskets & Sweepers
Refrigeration Gaskets
Material: PVC. Operating temperature -18°C to +65°C
Colour: Black
Supplied in 24m lengths
Supplied in 24m lengths
923-6-1001
923-6-1002
923-6-1003
2.5m lengths
2.5m lengths
Supplied in 25m lengths
For use with rubber gaskets
923-6-1001/1002/1003
923-6-3003
923-6-3001
923-6-2001
923-6-3005
3.4m lengths
Supplied in 25m lengths
2.5m lengths
923-6-1005
923-6-1004
923-6-3004
Supplied in 10m lengths
Supplied in 10m lengths
2.5m lengths
923-6-2002
923-6-2003
923-6-3002
GASKETS & SWEEPERS
Supplied in 24m lengths
PLEASE NOTE Pre-formed gasket orders will only be accepted with a completed order form (page 88)
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
97
Gaskets & Sweepers
Sweepers :: Angled Carrier (90°)
•
Supplied in 2.0, 2.5 and 3.0 metre lengths (Other cut lengths available to order)
No.1 Section
FS 1/12-90°
No.4 Section
Trim: 12mm
No.2 Section
FS 2/15-90°
Trim: 15mm
FS 2/20-90°
Trim: 20mm
FS 2/26-90°
Trim: 26mm
FS 2/34-90°
Trim: 34mm
FS 4/26-90°
Trim: 26mm
FS 4/43-90°
Trim: 43mm
FS 4/50-90°
Trim: 50mm
FS 4/80-90°
Trim: 80mm
FS 3/102-90°
Trim: 102mm
No.5 Section
GASKETS & SWEEPERS
98
No.3 Section
FS 3/17-90°
Trim: 17mm
FS 5/46-90°
Trim: 46mm
FS 3/20-90°
Trim: 20mm
FS 5/50-90°
Trim: 50mm
FS 3/26-90°
Trim: 26mm
FS 5/66-90°
Trim: 66mm
FS 3/34-90°
Trim: 34mm
FS 5/80-90°
Trim: 80mm
FS 3/40-90°
Trim: 40mm
FS 5/102-90°
Trim: 102mm
FS 3/44-90°
Trim: 44mm
FS 5/150-90°
Trim: 150mm
FS 3/50-90°
Trim: 50mm
FS 5/180-90°
Trim: 180mm
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
Gaskets & Sweepers
Sweepers :: Upright Carrier (180°)
•
Supplied in 2.0, 2.5 and 3.0 metre lengths (Other cut lengths available to order)
No.1 Section
FS 1/12-180°
No.4 Section
No.6 Section
Trim: 12mm
No.2 Section
FS 2/15-180°
Trim: 15mm
FS 2/20-180°
Trim: 20mm
FS 2/26-180°
Trim: 26mm
FS 2/34-180°
Trim: 34mm
FS 4/26-180°
Trim: 26mm
FS 4/43-180°
Trim: 43mm
FS 4/50-180°
Trim: 50mm
FS 4/80-180°
Trim: 80mm
FS 3/102-180°
Trim: 102mm
No.5 Section
No.3 Section
GASKETS & SWEEPERS
FS 3/17-180°
Trim: 17mm
FS 5/46-180°
Trim: 46mm
FS 3/20-180°
Trim: 20mm
FS 5/50-180°
Trim: 50mm
FS 3/26-180°
Trim: 26mm
FS 5/66-180°
Trim: 66mm
FS 3/34-180°
Trim: 34mm
FS 5/80-180°
Trim: 80mm
FS 3/40-180°
Trim: 40mm
FS 5/102-180°
Trim: 102mm
FS 3/44-180°
Trim: 44mm
FS 5/150-180°
Trim: 150mm
FS 3/50-180°
Trim: 50mm
FS 5/180-180°
Trim: 180mm
Oxford Hardware Limited Tel: 01295 680068
FS 6/210-180°
Fax: 01295 688123 Email: [email protected]
Trim: 210mm
Web: www.oxfordhardware.co.uk
99
Gaskets & Sweepers
Rubber Sweepers
•
Supplied in 2.0, 2.5 and 3.0 metre lengths
•
Other lengths can be cut to order
•
Rubber: EPDM
90° Carrier Angle
RS3/30-90
Total Rubber Depth: 30mm
RS3/55-90
Total Rubber Depth: 55mm
RS3/85-90
Total Rubber Depth: 85mm
GASKETS & SWEEPERS
180° Carrier Angle
RS3/30-180
Total Rubber Depth: 30mm
RS3/55-180
Total Rubber Depth: 55mm
RS3/85-180
Total Rubber Depth: 85mm
Rubber Only
100
RS3/30R
Total Rubber Depth: 30mm
RS3/55R
Total Rubber Depth: 55mm
RS3/85R
Total Rubber Depth: 85mm
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
Plumbing
Hardware
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
101
Plumbing Hardware
Pre-rinse Sprays :: Aquajet Range
ALL AQUAJET PRE-RINSE SPRAYS
•
Half turn levers come as standard
•
Optional chunky cross head taps are reliable and easy to use. £2 supplement per pair.
•
Restraining device (AJPR-RS) recommended to relieve stress on joints and to aid compliance with WRAS requirements
•
All metal connections reduce cracking, thread stripping and leaks
•
Spray guns, hoses and other parts are all fully interchangeable with most other manufacturers’ components
•
Extra long 300mm wall brace is standard. Can be shortened to achieve the perfect fit
•
Optional heads and spray patterns
•
Fan blade head recommended if water pressure is low
•
All models WRC /WRAS approved
•
Minimum operating pressure 1.5bar
Pre-rinse Spray :: Single pedestal, single feed
AJPR10 With cross head taps and optional bowl faucet BF1
AJPR-10
Pre-rinse spray, single pedestal, single feed, pre-built
AJPR-10CKD
Pre-rinse spray, single pedestal, single feed, kit form
Pre-rinse Spray :: Wall mounted, single feed
PLUMBING
FULLY ASSEMBLED
Aquajet
Pre-rinse Sprays
Are Available
In Two Formats
Fully Assembled
•
Factory assembled
•
Pressure and flow tested to 6 bar
•
Guarantees performance - no
leaks or missing parts
•
Only takes minutes to make water
connection
•
So minimises installation time and
cost
•
No need to revisit the site for
commissioning
OR
The Economical Kit Form
UNASSEMBLED - KIT FORM
•
Supplied as easy to assemble kit
form
•
The most economical model
•
Identical parts to fully assembled
version
AJPR15 With cross head taps
AJPR-15
Pre-rinse spray, wall mounted, single feed, pre-built
AJPR-15CKD
Pre-rinse spray, wall mounted, single feed, kit form
AJWALLFIXFIT
Required wall mounting kit
Minimum operating pressure: 1.5 bar
102
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
Plumbing Hardware
Pre-rinse Spray :: Single pedestal, twin feed
Pre-rinse Spray :: Twin pedestal, twin feed
AJPR30 With cross head taps and optional bowl faucet BF1
AJPR20 With cross head taps and optional bowl faucet BF1
AJPR-20
Pre-rinse spray, single pedestal, twin feed, pre-built
AJPR-30
Pre-rinse spray, twin pedestal, twin feed, pre-built
AJPR-20CKD
Pre-rinse spray, single pedestal, twin feed, kit form
AJPR-30CKD
Pre-rinse spray, twin pedestal, twin feed, kit form
Pre-rinse Spray ::
Wall mounted, Twin pedestal, twin feed
Pre-rinse Spray :: Options
•
AJPR40 With cross head taps
Pre-rinse spray, twin pedestal, twin feed, wall mounted,
pre-built
AJPR-40CKD
Pre-rinse spray, twin pedestal, twin feed, wall mounted,
kit form
AJWALLFIXFIT
Required wall mounting kit
AJPR-RS
Restraining device
BF1
Optional bowl
faucet, 6” spout,
pre-built
BF1-CKD
Optional bowl
faucet, 6” spout,
kit form
BF2
Optional bowl
faucet, 12” spout,
pre-built
BF2-CKD
Optional bowl
faucet, 12” spout,
kit form
BF3
Optional bowl
faucet, 16” spout,
pre-built
BF3-CKD
Optional bowl
faucet, 16” spout,
kit form
Pre-rinse Spray :: Tap Options
OPTIONAL: Cross Head Taps
Please specify if required
STANDARD: Lever Taps
PLUMBING
AJPR-40
Restraining device (AJPR-RS)
recommended to relieve stress on
joints and to aid compliance with
WRAS requirements
Minimum operating pressure: 1.5 bar
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
103
Plumbing Hardware
Pre-rinse Sprays :: Aquajet Spare Parts Diagram
Number
23
AJGT023
Trigger
01
AJD001
Pre-rinse spray body deck for AJ-PR-10
24
AJCHC025
Cross head tap: chrome
03
AJD002
Pre-rinse spray body deck for AJ-PR-20
25
AJTD027
2 Red, 2 blue inserts and 2 screws
04
AJD003
Pre-rinse spray body deck for AJ-PR-30
26
AJVCH028
05
AJD004
Pre-rinse spray body deck for AJ-PR-40
1 Valve body (fits hot on lever head body or hot and
cold on cross head body)
06
AJRT005
500mm Riser
27
AJVC029
1 valve body (fits cold ONLY) for lever head body
07
AJRT006
350mm Riser
28
AJRS031
6-inch
AJRGS032
6-inch Gooseneck
AJRS035
12-inch
AJRS037
16-inch
AJRSD038
18-inch double jointed
08
PLUMBING
104
AJRT007
100mm Riser
09
AJSR008
Spring retainer
10
AJOS009
Outer support spring
11
AJHA010*
Complete inner and outer hose assembly 38” c/w
end fittings
29
AJBF040
Bowl filler body
12
AJWP015
Hose assembly washer pack (3 washers)
30
AJGRK041
Spray gun valve repair kit
13
AJOP016
Spout “O” ring pack (2 x “O” rings)
31
AJVBF042
1 Valve body (for bowl filler ONLY)
14
AJWB017
Wall bracket
32
AJ20Y043
AJ-PR-20 Brass yoke and washer
15
AJRH018
Riser hook for pre-rinse spray head
33
AJA044*
Hose adapter
16
AJSG019*
Complete pre-rinse spray gun assembly rose head
34
AJ30AI045
AJ-PR-30 Adjustable inlet and washer
17
AJSG019A
Complete pre-rinse spray gun assembly angled rose
head
35
AJ40AI045
AJ-PR-40 Adjustable inlet and washer
36
AJSGB046
Spray gun body ONLY
18
AJSG019F
Complete pre-rinse spray gun assembly fan blade
head
37
AJBC047
Valve bonnet and packing gland
38
AJLT026
Pair (H and C) 63mm chrome lever
Note: Replacement cold valve AJVC029 also required
39
AJBFB048
Bowl filler body ONLY (no valve assembly)
19
AJFP022L
Water saving face plate
20
AJGH020*
Spray gun handle and washer
21
AJRR021
Rubber ring
22
AJFP022
Faceplate and screw
Oxford Hardware Limited Tel: 01295 680068
*Note: ½-inch BSP versions available at extra cost. Please add BSP to the model number to
indicate your preference
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
Plumbing Hardware
Aquajet Retractable Wash Down Hoses
Pre-rinse Sprays :: Aquajet 50
•
Hose length: 15
metres
•
Hose inside Dia.:
12mm
•
Inlet: ½” BSP, female
connection
•
Can be used as a pre-rinse for dirty dishes or food
washing and rinsing applications
•
Overall Weight:
24kg (MRK15)
23kg (MSRK15)
13kg (MERK15)
•
Easy to clean and service
•
Integral restraining cable prevents overstretching and
spray gun contact with dish water
•
Coiled hose absorbs the wear and tear from twisting
the gun
•
Wall mounting keeps the sink clear
•
Big bore delivery hose produces excellent spray
pattern
•
Save up to 25% in water when fitted with water saving
face plate option, at no extra cost
•
Connection size: 1/2” BSP (female)
•
Max water pressure: 5 bar (75psi)
•
Min water pressure: 1.5 bar (22.5psi)
•
Max water temperature: 55°C (131°F)
Mis-Use resistant Pre-Rinse Spray
For pre-rinsing dishes or for rinsing and washing
vegetables and other food (when connected to a potable
water supply).
MRK15
MSRK15
MERK15 HDG
PLUMBING
SSG
HDG
FBG
AJPR50 in the ‘stored’
position (water-saving
face plate shown)
MRK15
Wash down hose, standard casing
MSRK15
Wash down hose, stainless steel casing
MERK15
Wash down hose, stabilised polypropylene casing, enclosed
SSG
Standard, rose head gun
FBG
Fan blade, head gun
HDG
Heavy duty, adjustable head gun
Oxford Hardware Limited Tel: 01295 680068
AJPR-50
Pre-rinse spray, mis-use resistant
AJPR-50W
Pre-rinse spray, mis-use resistant with water saving face
plate
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
105
Plumbing Hardware
Pre-rinse Sprays :: TopClean
TopClean represents a highly innovative pre-rinse spray unit incorporating
an automatic pull-down function. The water jet is regulated by pulling down
the spray gun towards the sink. A gas spring returns the spray gun back to
it’s original position.
Unique
•
Easy-to-use, pull-down function automatically turns on water when needed
•
Gas strut returns the spray back to it’s original position and turns off water
•
Very safe to use, as the gas retaining spring absorbs even a fast release of the spray gun
Water Saving
•
Automatic shut off significantly improves water savings
•
Water only dispenses when pre-rinse is in actual use
Hygienic
•
No triggers or control mechanisms makes the TopClean easy to clean
Features
•
Engineered with the highest quality chrome finish for easy cleaning and durability
•
Top quality brass fittings ensure long service
•
Complete with non-return valves
Application Options
*
Warranty: 10 year warranty against manufacturing defects
•
Available in a variety of tap base configurations to suit most installations
•
Option of bowl filler is available on most models
PLUMBING
106
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
Plumbing Hardware
Pre-rinse Spray
Deck Mounted :: Single Water Feed
Pre-rinse Spray
Deck Mounted :: Twin Water Feed :: Monoblock
•
Worktop Hole: 30mm (1 3/16”)
•
Worktop Hole: 30mm (1 3/16”)
•
Water Connection: 1 x 1/2”
•
Water Connection: 2 x 1/2”
•
Height: 1150mm (3’ 9 9/32”)
•
Height: 1150mm (3’ 9 9/32”)
•
Height with Bowl Filler:
1250mm (4’ 1 7/32”)
GXTC20BF
GXTC10
GastroTechniX Pre-rinse Spray, Deck Mounted, Single Water Feed
GXTC20
GastroTechniX Pre-rinse Spray, Deck Mounted, Twin
Water Feed, Monoblock
GXTC20BF
As above, including 250mm (9 27/32”) Bowl Filler
Pre-rinse Spray
Deck Mounted :: Twin Pedestal
•
180mm (7 3/32”) Centers
•
Worktop holes: 30mm (1 3/16”)
•
Water Connection: 2 x 1/2”
•
Height: 1250mm (4’ 1 7/32”)
Pre-rinse Spray
Panel / Upstand Mounted :: Twin Pedestal
•
150mm (5 29/32”)
Centers (+/- 25mm (63/64”)
•
Panel holes: 25mm (63/64”)
•
Water Connection: 2 x 1/2”
•
Height: 950mm (3’ 1 13/32”)
•
Height with Bowl Filler: 1050mm
(3’ 11/32”)
PLUMBING
GXTC40BF
GXTC30BF
GXTC30
GastroTechniX Pre-rinse Spray, Deck Mounted, Twin Pedestal
GXTC40
GastroTechniX Pre-rinse Spray, Deck Mounted, Twin Pedestal
GXTC30BF
As above, including 250mm (9 27/32”) Bowl Filler
GXTC40BF
As above, including 250mm (9 27/32”) Bowl Filler
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
107
Plumbing Hardware
Sink Bowls :: Waste Kits :: Accessories
Strainer/Waste
VTE - EURO Series
•
The U.K.’s largest range of sink bowls
•
59 different types and sizes available from stock
•
Made in 18/10 304 grade stainless steel
•
Finished in aquablast then electropolished (external and internal)
•
Strainer wastes with overflow available
•
Plastic wastes with and without overflow offered as alternative
Strainer/Waste
VTE series
Stand Pipe/Waste
VTI series
PLUMBING
Please specify waste position and overflow position when ordering. Left and Right hand waste is
determined when the long side is towards you. The waste is then either left back or right back. If you
wish to fix the sinks with the short side towards you the handing must be established from the long side.
LONG SIDE
For this
configuration
customers will
need to order a
right hand waste
i.e. right hand
in relation to the
long side.
Right Hand Waste
Left Hand Waste
Please specify long or short side for overflow hole on oblong sinks
108
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Waste
VFSW series
Web: www.oxfordhardware.co.uk
Plumbing Hardware
Sink Bowls
Wastes for Pot Wash Bowls
•
Specify LH / RH (Imagine longest length from
left to right at back)
•
•
If no standpipe used, Oxford Hardware can
cut overflow hole (no charge but extra day)
F2131
250 Deep
F2132
300 Deep
F2133
380 Deep
•
THE WHOLE RANGE EX-STOCK
Standpipe, strainer and waste
5 MOST POPULAR SIZES:
V604530 LH/RH
600x450x300H
V504030 LH/RH
500x400x300H
**V504025 LH/RH
500x400x250H
**V404030
400x400x300H
**V404025
400x400x250H
Waste Disposal Sink
V13150
V252516
250x250x160H
V252520
250x250x200H
V293220 CENT
290x320x200H
Centre waste
All Oxford Hardware bowls (except Pot Wash)
have the European flange.
The EURO wastes fit UK and European
flanges. VTE/VTI only fit European flanges.
Waste hole sizes
The standard waste hole is 54mm diameter.
Waste disposal units and basket strainer waste
holes are 89mm diameter.
Oxford Hardware can cut or enlarge waste
holes and cut overflow holes
Waste Kits
VTE2518EURO
THE WHOLE RANGE:
325x175x150H
Flange sizes
The waste fitting is seated in a flange in the
base of the bowl. UK flanges can be 70 or
80mm diameter. European flanges are 70mm
diameter.
Combined sink waste
standpipe/strainer, S/S &
polyamide 250H
Weld In Flat Flange :: Round
VTE3018EURO
Combined sink waste
standpipe/strainer, S/S &
polyamide 300H
•
Needs overflow hole
V2618000 WELD
260 DIA 180H
VTE2018
Combined sink waste
standpipe/strainer, brass
CP 200H
V3018000 WELD
300 DIA 180H
V3618000 WELD
360 DIA 180H
VTE2518
Combined sink waste
standpipe/strainer, brass
CP 250H
V4218000 WELD
420 DIA 180H
VTE3018
Combined sink waste
standpipe/strainer, brass
CP 300H
•
Straight sided
***V293520 LH/RH
290x350x200H
V293522 LH/RH
290x350x220H
V294020 LH/RH
290x400x200H
V332318 WELD LH/RH
335x235x180H
V333320 WELD
330x330x200H
V343020 LH/RH
340x300x200H
***V344020 LH/RH
340x400x200H
***V344025 LH/RH
340x400x250H
VTI2018
Stand pipe S/S 200H & waste
V344030 LH/RH
340x400x300H
VTI2518
Stand pipe S/S 250H & waste
**V404020
400x400x200H
VTI3018
Stand pipe S/S 300H & waste
V332318 INS LH/RH
335x235x180H
**V404025 (repeat)
400x400x250H
S/PIPE200
S/S Stand pipe 200H
V333320 INS
330x330x200H
**V404030 (repeat)
400x400x300H
S/PIPE250
S/S Stand pipe 250H
V401815 INS LH/RH/Centre
400x180x150H
V404520 LH/RH
400x450x200H
S/PIPE300
S/S Stand pipe 300H
V404525 LH/RH
400x450x250H
VPIL018
V404530 LH/RH
400x450x300H
Waste brass CP
(European flange 70mm)
V454520
450x450x200H
V454525
450x450x250H
V454530
450x450x300H
V503030 (central
short side waste)
500x300x300H
**V504020 LH/RH
VPIL01580
Waste brass CP
(U.K. flange 80mm)
VFSW2PC-70
Plastic 1 ½” waste &
overflow, 70mm S/S flange,
chain & plastic plug
VBSW10P
500x400x200H
Plastic 1 ½” waste, no
overflow, 70mm S/S flange,
chain & plastic plug
500x400x200H
**V504025 LH/RH
(repeat)
500x400x250H
V504030 LH/RH
(repeat)
500x400x300H
V505025
500x500x250H
VPLUG
Metal plug CP
V505030
500x500x300H
VCHAIN
Extra chain: high bowls
V505525 LH/RH
500x550x250H
V505530 LH/RH
500x550x300H
WASTEHOLE
CUT
For basket strainer waste
or waste disposal unit
enlarges hole to 89mm DIA
VSOUND250
Sound proof pad 200x500
VSOUND250BOX
Sound proof pads
200 x 500 (box of 10)
Each pad can cover 2 sinks
V604525 LH/RH
600x450x250H
V604530 LH/RH
(repeat)
600x450x300H
V605030 LH/RH
600x500x300H
V605033 LH/RH
VBSW9P
Plastic 1 ¼” waste, no
overflow, 70mm S/S flange,
chain & plastic plug
VFSW1PC-70
Plastic 1 ¼” overflow &
waste, 70mm SS flange,
chain & plastic plug
600x500x330H
** Central waste available for waste disposal
*** Corner basket waste available
Basket Strainer / Waste
•
Needs bigger wastehole cut in sink (89mm)
Pot Wash Bowls
•
Needs overflow hole
Insert Design :: Round
•
Needs overflow hole
•
Straight sided
V2618000 INS
260DIA 180H
V3012000 INS
300DIA 120H
V3018000 INS
300DIA 180H
V3618000 INS
360DIA 180H
V3818000 INS
380DIA 180H
V4218000 INS
420DIA 180H
Insert Design :: Oval
•
With overflow hole
•
Mirror finished
V395115.INS
390x510x155H
V455215.INS
454x529x155H
Incl. tap hole
PLUMBING
VA504020CEN (central
back waste 200mm)
Insert Design
:: Square / Rectangular
Hemispherical Insert
•
Needs overflow hole
V2011HEMI.INS
200x115H
VA2011SS
200x115H
V2613HEMI.INS
260x130H
V3014HEMI.INS
300x140H
Centre Pin
V3615HEMI.INS
360x150H
V765130 DESCALED LH/RH
760x510x300H
VBWSTSS
1½” x 115 DIA SS
VA3815SS
380x155H
V765138 DESCALED LH/RH
760x510x380H
VBWSTOFSS
As above + overflow
V4216HEMI.INS
420x160H
NOTE: All dimensions are internal. Round bowls available with / without overflow. Blank bowls available.
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
109
Plumbing Hardware
Wash Hand Basin
VWHB000
Hand Basin :: Knee Operated
•
Including apron skirt
•
•
Complete with 32mm waste kit and
plug
Material: Stainless steel 18/10 Aisi
304
•
Finish: Scotch-Brite
•
External: 305 x 270 x 140mm H
•
•
Internal: 230 x 120mm H
Control through up-and-over front
panel. When depressed: flow control
mixer valve runs for 15 seconds
•
Includes:
Splash back
Mixer valve
Flexible hose
Swivel spout
Soap dispenser
Hot and cold mixer with check
valve
•
Overall Dimensions:
330 x 330mm, 500 H
•
Sink Bowl Dimensions:
Bowl dia. 265mm, depth 110mm
•
Separate splash back - makes
assembly and mounting to the wall
easier
•
No visible screws
Hand wash basin (Model A Type)
Wash Hand Basin
VWHB001
VWHBTO91S
•
Including apron skirt
•
Complete with 32mm waste kit,
plug and overflow
•
External: 400 x 350 x 110mm H
•
Internal: 320 x 110mm H
Wash hand
basin, knee
operated
Hand Basin :: With Electronic Tap
Hand wash basin (Model B Type)
•
Material: Stainless steel 18/10 Aisi
304
•
Finish: Scotch-Brite
•
On and off control through
infrared beam. Half-second delay
•
Hygienic
•
Very low water consumption
•
Battery (2 year life) or mains operated
•
Includes:
Splash back
Hot and cold mixer with check valve
Flexible hose
Fixed tap
Soap dispenser
•
Overall dimensions:
400L x 340W, 550 H
•
Sink Bowl Dimensions:
Bowl dia. 320mm, depth 230mm
•
Separate splash back – makes
assembly and mounting to the wall
easy
•
No visible screws
Oval Sink
•
Insert Bowl
•
Mirror Finish
•
With overflow hole
•
Size: 390 x 510 x 155mm H
VWHBRELECT91
V395115.INS
Oval sink with overflow hole
Wash hand
basin with
electronic
tap
PLUMBING
Portable Handwash Unit
Oval Sink :: With Tap Hole
•
Insert Bowl
•
Mirror Finish
•
With overflow and tap holes
•
Size: 454 x 529 x 155mm H
A completely self-contained portable
hot-water hand wash system of 23 litres
with a smart, smooth design and fully
enclosed front and sides.
Ideal for the hygiene requirements
inside catering establishments when
mains hot water is unavailable or at
markets, outside-vending and events.
WPHWU.23LTS.ST
V455215.INS
110
Portable Hand Wash Unit Self-contained
Oval sink with overflow and tap holes
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
Plumbing Hardware
Waste Outlets :: Twist Handle
•
Fast drainage
•
Positive seal
•
•
•
•
Overflow Elbow Material: Bright
nickel plated copper alloy tubing
Snap-in strainer
•
Sink Opening: 89mm (3½”)
Outlet Material: Bright nickel
plated cast bronze body, stainless
steel face flange, strainer and
handle; Neoprene head gasket
•
Face Flange Diameter: 114mm
(4½”)
•
Handle Length: 305mm (12”)
Grohe Taps and Accessories
Full catalogue available
Please enquire
Overflow Head Material: Bright
nickel plated cast bronze head,
stainless steel strainer
0458 005 400
Waste outlet, 2” NPT (no overflow)
0458 006 400
Waste outlet, 2” NPT, with overflow
(requires head and elbow)
0458 007 010
Overflow head
0458 007 020
Overflow elbow (356mm x 457mm) (14”x18”)
PLUMBING
Also available in component parts
See page 118
BMD
Bain Marie Drain, lever ball valve, 8” swivel spout
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
111
Plumbing Hardware
Wall Mixer :: Twin
Deck Mixer :: Mono
Deck Mixers :: Two Hole
600 WSMR
600 MSMR
600 DSMR
500 MX
½” Wall mounted sink mixer,
dome head
½” Mono sink mixer - dome
head (one hole)
½” Deck sink mixer - dome
head (two hole)
½” Deck mixer - cross head
Bib Taps
500 WX
500 ML6
500 ML3
½” Bib taps - cross head, wall
mount (pair)
½” Deck mixer - 6” lever
½” Deck mixer - 3” lever
PLUMBING
Bib Taps :: Accessories
35359
1” Extension for bib
tap
35360
1½” Extension for
bib tap
35889
Elbow wall plate
15mm x 1½”
A comprehensive range of taps manufactured to British Standards and fully WRAS listed.
The lever operated taps are fitted with quarter-turn ceramic disc valves for easy operation
112
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
Plumbing Hardware
Sink Taps
600 SR
500 SX
500 SL3
500 SL6
½” High neck pillar sink taps dome head (pair)
½” High neck pillar sink taps cross head (pair)
½” High neck pillar sink taps 3” lever (pair)
½” Sink taps - 6” lever (pair)
600 BR
500 BX
500 BL3
500 BL6
½” Basin taps - dome head (pair)
½” Basin taps - cross-head (pair)
½” Basin taps - 3” lever (pair)
½” Basin taps - 6” lever (pair)
700 BMR
700 BML
600 BSCR
½” Basin mono mixer, round
head
½” Basin mono mixer, twin lever
½” Basin taps - round head,
self-closing (non-concussive)
Basin Taps
PLUMBING
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
113
Plumbing Hardware
Aquajet Taps :: Single pedestal, single water feed
AJ-B-106
AJ-B-106, AJ-B-112, AJ-B-116
AJ-B-1DJ18
AJ-B-1SG6
AJ-B-106
6” Spout
AJ-B-1DJ18
18” spout
AJ-B-112
12” Spout
AJ-B-1SG6
6” Swivel goosneck spout
AJ-B-116
16” Spout
Suffix product code with ‘X’ for cross heads (£2 extra per pr)
Suffix product code with ‘L’ for lever heads
Aquajet Taps :: Single pedestal, twin water feed
AJ-B-206
AJ-B-206, AJ-B-212, AJ-B-216
AJ-B-2DJ18
AJ-B-2SG6
AJ-B-206
6” Spout
AJ-B-2DJ18
18” Double jointed spout
AJ-B-212
12” Spout
AJ-B-2SG6
6” Swivel gooseneck spout
AJ-B-216
16” Spout
Suffix product code with ‘X’ for cross heads (£2 extra per pr)
Suffix product code with ‘L’ for lever heads
PLUMBING
Aquajet Taps :: Tap options
•
For lever head taps suffix product code with ‘L’ when
ordering
•
For cross head taps suffix product code with ‘X’ when
ordering (£2 extra per pr)
A comprehensive range of taps manufactured to meet the rigours of commercial catering environments.
Available as cross heads or levers and in a variety of models to meet every application.
114
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
Plumbing Hardware
Aquajet Taps :: Twin pedestal, wall mounted, twin water feed
AJ-W-406
AJ-W-406, AJ-W-412, AJ-W-416
AJ-W-4DJ18
AJ-W-4SG6
AJ-W-406
6” Spout
AJ-W-4DJ18
18” Double jointed spout
AJ-W-412
12” Spout
AJ-W-4SG6
6” Swivel gooseneck spout
AJ-W-416
16” Spout
Suffix product code with ‘X’ for cross heads (£2 extra per pr)
Suffix product code with ‘L’ for lever heads
Aquajet Taps :: Twin pedestal, twin water feed
AJ-B-312
AJ-B-306, AJ-B-312, AJ-B-316
AJ-B-3DJ18
AJ-B-3SG6
AJ-B-306
6” Spout
AJ-B-3DJ18
18” Double jointed spout
AJ-B-312
12” Spout
AJ-B-3SG6
6” Swivel gooseneck spout
AJ-B-316
16” Spout
Suffix product code with ‘X’ for cross heads (£2 extra per pr)
Suffix product code with ‘L’ for lever heads
PLUMBING
Aquajet Taps :: Spout options
•
Visual reference for spout types when ordeing Aquajet Taps
6” Spout
12” Spout
Oxford Hardware Limited Tel: 01295 680068
16” Spout
6” Goose Neck Spout
Fax: 01295 688123 Email: [email protected]
18” Double Jointed Spout
Web: www.oxfordhardware.co.uk
115
Plumbing Hardware
Infrared Taps
442006
Unique Self-Contained Electronic Hands-Free Tap
Long established as a premier manufacturer of food service taps and water
control components, DELABIE is at the forefront of providing solutions to catering
professionals with advanced, state-of-the art plumbing components, specifically
designed for commercial food service applications.
The latest development in the DELABIE range of ‘Intelligent’ hands-free basin taps
is the Tempomatic 3. It is a revolutionary tap that provides ‘hands-free’ electronic
controls for basins without the complication of wiring, electrical supplies or exposed
water / solenoid controls.
The Tempomatic 3 incorporates all the necessary mechanisms and controls within
the actual tap body. The components, in self-contained capsules, can be easily
reached through an access cap should service be necessary.
All that is required is a water supply, and you then have a self-contained, hands-free
basin tap—quick and easy to install.
How it works
Advanced, lithium-powered
battery operation providing
approximately 300,000
operations.
Electronic battery controls,
sensor and electro-magnetic
solenoid, all located within
the body of the tap in
waterproof capsules.
1 Electronic detection
sensor and control
capsule
2 2 x 6V Lithium
batteries
3 Electromagnetic
solenoid valve
No external solenoid valves
or external electrical control
boxes.
Thermostatic
Mixing Valve
What was once a costly problem or a design concern is now
overcome!
PLUMBING
Establishments that have put off re-fitting their catering areas or specifying handsfree electronic controls because they were concerned about bringing in or adapting
necessary power supplies can enjoy all the conveniences of electronic hands-free
taps immediately without the concern of electrical supplies.
442006
Electronic basin tap
492006
Electronic basin mixer
tap with temperature
lever selector
The benefits are many
•
Ease of use – Hand washing without surface or tap contact becomes easy and
therefore more likely to be undertaken by catering staff. It thus promotes Good
Hygeine practice.
•
Hygiene - no hands means no spreading of germs, bacteria and other
contaminants.
•
Ecology - 80% savings in water and energy with automatic shut-off feature and
regulated flow rate.
•
Time-savings - convenient, motion-activated sensor.
•
Money-savings - fewer calls back to site with a design targeted for intensive use
in all commercial, industrial and public applications with shock-proof sensors,
scale-proof aerators, anti-blocking safety design and maximum temperature
controls.
•
Peace of mind - long-lasting components and robust construction backed up by
a three-year guarantee.
116
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
MV75
¾” Thermostatic
mixing valve
Web: www.oxfordhardware.co.uk
Plumbing Hardware
Delabie :: Table Top Sink Fittings
Delabie :: Hygiene Line :: Knee / Foot Operated
•
10 year warranty
•
•
Attractive, comfortable designs for intensive
commercial applications
More hands-free ideas from Delabie to create a
‘no touch’ environment
•
Reduces risk of cross-contanimation and the
spread of germs
•
Encourage good hygiene and safe practices
669515
½” Single control mixer with
spout L 250, H 230
669615
½” Single control mixer with
spout L 350, H 300
G664415
½” Single hole mixer with
spout L 250, H 220
G6558*
½” Twin hole mixer with spout
L 250 (optional longer spout
available)
* Model G6558 is supplied as a built unit
with centres at 180mm. If required, it can be supplied
loose, allowing centres to be set between 100-240mm.
Please specify when ordering.
Delabie :: Spouts
735400
Tempogenou knee operated
valve straight type in line
inlet/outlet
739100
Mixfoot pedal operated mixer
floor mounted
739102
Mixfoot pedal operated mixer
wall mounted (height of pedal
is adjustable)
736101
Monofoot pedal operated valve
floor mounted
736102
Monofoot pedal operated valve
wall mounted (height of pedal
is adjustable)
Delabie :: Hygiene Line :: Soap Dispensers
•
A variety of choice to suit every application
•
10 year warranty
•
Mix and match to build as per specifications or requirements
•
Attractive, comfortable designs for intensive commercial applications
Chrome plated, cast brass
fixed spout, vandal proof with
theft proof aerator
981142
Chrome plated, cast brass
967152
Swan neck swivel spout
L 150 H170
967202
Swan neck swivel spout
L 200 H250
964252
Catering spout fits into mixer
outlet dia 20mm F ¾” L 250
H 230 w/aerator (flow rate 24
l/min under 3 bar)
846327
D273015
Base-union with flange dia
60mm and back nut with
screws M ¾” M ½”
Tap control for spouts (panel
mounting tap)
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
729012
Soap dispenser with 1ltr bottle
elbow spout L 120mm
729008
Soap dispenser with 1ltr bottle
straight spout L 80mm
729108
Soap dispenser with nylon pipe
1.20m for remote tank straight
spout L 80mm
729150
Soap dispenser wall mounted
for walls 150mm thick
Web: www.oxfordhardware.co.uk
PLUMBING
981148
117
Plumbing Hardware
Braided Tap Connector Hose :: Stainless Steel
Blanking Cap for Tap Holes
47 325
F04
F01
300mm Hose, 15mm x ½”
F02
300mm Hose, 15mm x ½”, Maxi Bore
F04
300mm Hose, 15mm x ½”, Isolation Valve
F08
500mm Hose, 15mm x ½”
Pressure Reducing
Valves
PRV50
½” Valve, adjustable
0-8 bar
Lever Ball Valve
•
Blanking cap for tap holes,
chrome plated
Pressure Gauge
Y Filters
PG10
50Y
Thermostatic Mixing
Valves
MV75
¾” Thermostatic
mixing valve
¼” Pressure gauge
for PRV
15mm Y Filter
Top Hat Spacer
Washers
Single Check Valve
TPSW
SCV01
½” Top hat spacer
washers
15mm Valve,
non-return
Bain Marie Drain :: Lever Ball Valve
Red steel handle
•
Complete assembly
PLUMBING
BMD
•
OHT09
Bain Marie Drain, lever ball valve,
8” swivel spout (complete assembly)
Component parts
OHT09
Waste ¾”
OHT10
Lever ball valve ¾”
OHT11
Swivel spout, S type ¾”,
length 8” (200mm)
OHT10
CWIV15
118
CWIV15
15 x 15mm Valve
CWIV22
22 x 22mm Valve
CWIV28
28 x 28mm Valve
BMD
OHT11
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
Gastronorm Pans
& Accessories
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
119
Gastronorm Pans & Accessories
Gastronorm Containers & Accessories
GASTRONORM PANS AND ACCESSORIES
•
Containers Plain
•
Handles for Containers Plain
•
Perforated Containers
•
Insert Perforated Containers
(special depths)
•
Handles for Perforated
Containers
•
Lids Plain
•
Slots for Lids Plain
•
Anti-Spill Silicone Seal Lids
and Slots
•
Accessories
•
Flat Flange Containers
(special for ovens)
•
Drainer Plates
•
Adaptor Bars
•
Self-Service Trays
•
Wetwells
•
Polycarbonate Containers and
Covers
•
Ice Cream Basins and
Accessories
•
High Quality, Stackable
Gastronorm Pans, 0.8mm thick
•
Constructed from 18/10 304
Grade Stainless Steel
Gastronorm Model Numbers & Sizes
GASTRONORM
120
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
Gastronorm Pans & Accessories
Plain Containers
•
Perforated Containers
With stacking recess (except 20 and 40mm High)
Model 2/1
Model 1/6
BA21020
650x530x20H
BA16020
176x162x20H
BA21040
40H
BA16040
40H
BA21065
65H
BA16065
65H
BA21100
100H
BA16100
100H
BA21150
150H
BA16150
150H
BA21200
200H
BA16200
200H
Model 1/1
Model 1/9
BA11020
530x325x20H
BA11040
40H
BA11065
65H
BA11100
100H
BA11150
150H
BA11200
200H
Model 1/2
BA12020
325x265x20H
BA12040
40H
BA12065
65H
BA12100
100H
BA12150
150H
BA12200
200H
Model 1/3
BA13020
325x175x20H
BA13040
40H
BA13065
65H
BA19065
KBA19065
176x108x65H
Low cost type, no
stack recess
BF23020
355x325x20H
BF21040
40H
BF23040
40H
65H
BF23065
BF21065
Model 2/3
BFL21150*
150H
BFL23150*
150H
BFL21200*
200H
BFL23200*
200H
BA23065
65H
BA23100
100H
BA23150
150H
BA23200
200H
Model 2/4
530x325x20H
BF11040
40H
BF11065
65H
BFL11065*
65H
BFL11100*
100H
BFL11150*
150H
BFL11200*
200H
BA24040
40H
BA24065
65H
BA24100
100H
Model 1/2
BA24150
150H
BF12020
325x265x20H
BF12040
40H
65H
BA28100
100H
BA28150
150H
200H
BF11020
530x162x20H
40H
BA14200
Model 1/1
BA24020
BA28065
150H
100H
40H
BA28040
BA14150
BFL23100*
BA23040
325x132x20H
100H
100H
355x325x20H
BA28020
BA14100
65H
BFL21100*
BA23020
200H
65H
Model 2/3
Non-Euro 150H
BA13200
BA14065
Model 2/1
BA19150
Model 2/8
40H
Sides perforated as marked with * on product code
650x530x20H
150H
BA14040
All bases perforated
•
BF21020
BA13150
264x162x20H
•
100H
100H
BA14020
With stacking recess
(except 20 and 40mm High)
BA19100
BA13100
Model 1/4
•
Granite Enamel
•
Fits Electrolux, Enodis, Convotherm
& Rational
•
Better heat distribution
•
Perfect for Cook & Brown bake off
products
BF12065
100H
BFL12150*
150H
BFL12200*
200H
Model 1/3
BF13040
325x175x40H
BF13065
65H
BFL13100*
100H
BFL13150*
150H
BFL13200*
200H
Fits inside plain container
Model 1/1
BFI 11040
530x325x30H
BFI 11065
55H
BFI 11100
90H
BFI 11150
140H
BFI 11200
190H
Handles
BFL14100*
100H
BA11040ENAM
Granite Enamel 530 x 325 x 40H
BFL14150*
150H
BFL14200*
200H
Model 1/6
Only 16100 stocked
BF16065
264x162x65H
176x162x65H
BFL16100*
100H
BFL16150*
150H
BFL16200*
200H
Fax: 01295 688123 Email: [email protected]
MV
MRL
Pair vertical
Pair economy
GASTRONORM
Model 1/4
BF14065
Oxford Hardware Limited Tel: 01295 680068
•
65H
BFL12100*
BA11020ENAM
Granite Enamel 530 x 325 x 20H
BA11065ENAM
Granite Enamel 530 x 325 x 65H
Insert Perforated
Containers
Handles ::
For Insert Containers
MS
Pair hinged
Web: www.oxfordhardware.co.uk
121
Gastronorm Pans & Accessories
Lids Plain ::
Centre Handle
•
Note: for flat lids without centre
handle add ‘P’ to code. So 1/2
size flat lid is COP12000
•
Model below denoted by brackets
e.g. (1/1)
Anti-Spill Lids With
Silicone Seal
•
Model below denoted by brackets
e.g. (1/1)
CT11000
(1/1) 530x325
COP11000
(1/1) 530x325
CT12000
(1/2) 325x265
COP12000
(1/2) 325x265
CT13000
(1/3) 325x175
COP13000
(1/3) 325x175
CT14000
(1/4) 264x162
COP14000
(1/4) 264x162
CT16000
(1/6) 176x162
COP16000
(1/6) 176x162
CT23000
(2/3) 355x325
COP19000
(1/9) 176x162
COP23000
(2/3) 176x108
CO11000
(1/1) 530x325
CO12000
(1/2) 325x265
CO13000
(1/3) 325x175
CO14000
(1/4) 264x162
CO16000
(1/6) 176x162
COP24000
(2/4) 355x325
CO19000
(1/9) 176x108
COP28000
(2/8) 325x132
CO23000
(2/3) 355x325
CO24000
(2/4) 530x162
CO28000
(2/8) 325x132
•
SMA
Handle slots
SME
Spoon slots
SMM
Handle/spoon slot
Carving Pads
Grid Shelves
•
Adaptor Bars ::
Spacer Bars
Lid Slots :: Notches
Lids :: Without
Centre Handle
Models below GN grid shelves
solid s/s, 6mm frame wires,
3mm grid wires electropolished
•
8 Pint Pot & Lid
Models below consists of 20mm
perforated inset container
•
6 fixed spikes
•
Order juice catching gastronorm
pan separately
Model below denoted by brackets
e.g. (1/1)
SE11000
SE12000
(1/1) 530mm
(1/2) 325mm
X11GRID
x1/1-080
X21GRID
x2/1-080
X23GRID
x2/3-080
KV8 POT
KV8 LID
Round 8 pint/4.5
ltr pot
Ditto lid with ladle
notch
BF11020CARV
(1/1)
BF12020CARV
(1/2)
BF23020CARV
(2/3)
Gastronorm Model Numbers & Sizes
GASTRONORM
122
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
Gastronorm Pans & Accessories
Drainer Plates
Trivets
•
•
To fit inside gastronorm pans
•
Raises base of gastronorm pan by
10 mm
FF11000
1/1
FF12000
1/2
FF21000
2/1
FF23000
2/3
FF13000BBF
1/3
FF14000BBF
Ice Cream Basins
Drainer wire
rack to fit inside
gastronorm pans
Ice Wells
•
•
Stainless Steel
•
10mm flange, 5mm return
•
Napoli size stocked
•
Other sizes are special order and
not ex. stock
With or without insulation
KIT COMPRISES:
FF11WIRE
1/1
FF12WIRE
1/2
FF13WIRE
1/3
1/4
FF11000
GE14120
265x160x120H
GE14150
150H
GE14170
170H
GE181612
180x165x120H
GE361612EC
360x165x120H
•
Polished S/S
L286117
RL443
Flat Flange
Containers
L286117
Cutlery Cylinder, tapered
120mm dia., 135H
L286117.LARGE
Cutlery cylinder, tapered
125mm dia., 185H
RL443
Cutlery cylider, perforated
120mm dia., 135H
•
Flat flange containers also
available in extra heavy duty
material (1.2 mm thick)
Model 1/1
360x165x080H
GE361615
150H
GE361618
180H
GE331612
330x165x120H
GE331615
150H
GE331618
180H
GE362512
360x250x120H
GE362515
150H
GE362518
180H
GE212015
210x200x150H
GE212017
170H
GE212020
200H
GE422015
420x200x150H
GE422017
170H
GE422020
200H
GE422025
BTI 11020
530x325x20H
BTI 11040
40H
BTI 11065
65H
GE2025
JJ10053
GELAV.CU
325x265x20H
BTI 12040
40H
BTI 12065
65H
•
Full size drainer plate with chip
scuttle plate
Model 2/1
•
530 x 325 x 100H mm
BTI 21020
650x530x20H
•
For 100 or 150mm deep
gastronorm pans
BTI 21040
40H
BTI 21065
65H
Optional insulated
outer box 200mm
deep
•
Other depths and specifications
available
•
325mmH, 160mm depth
Model GN 1/1
BAWET11160.INS
BAWET11160.W
Insert Type
Weld In Type
250H
Single body
portioner wash
Air Pots
•
Pump action S/S
Ice cream
dipper
GASTRONORM
BTI 12020
¾” flexible
hose waste kit
Wet Wells
Tube dia.
200mm 250H
RJ089
Model 1/2
Chip Scuttle & Scoop
GE361680
Outer container
with drain hole
Vwaste3/4
GE361612EX
(Polished rim, in stock,
Napoli size) 120H
Cutlery Cylinder
Drainer plate
BA11200mod
Blanking Plates
Model 2/3
FF11 CHIP
RL674
•
To cover gastro wells
BTI 23020
355x325x20H
VACAIRPOT2.5LTS
2.5 Ltr
135mmH
BTI 23040
40H
BL11000
(1/1) Full size
VACAIRPOT3.0LTS
3.0 Ltr
Chip Scoop
BTI 23065
65H
BL12000
(1/2) Half size
VACAIRPOT4.0LTS
4.0 Ltr
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
123
Gastronorm Pans & Accessories
Polycarbonate Containers and Covers
•
Polypropylene Containers
For heavy duty applications
•
Temperature range -40°C to +99°C
•
Standard finish is clear
•
Add P to beginning of code for black
•
Price of black is approximately 20%
higher
Model 2/1
BP21200
CP21000
FFP21000
Model 1/1
Model 1/4
530x325x65H
BP14065
Model 1/9
264x162x65H
BPP11200
200H
BPP19100
150H
BPP19065
65H
100H
CPP19000
1/1 and 1/9 Lid
FFP11000
1/1 Drainer plate
FFP12000
1/2 Drainer plate
Cover
BP14100
100H
BPP11150
Drainer
BP14150
150H
BPP11100
BP14200
200H
BPP11065
65H
Cover
CPP11000
Lid, centre handle
Model 1/1
CP14000
BP11065
530x325x65H
BP11100
100H
Model 1/6
BP11150
150H
BP16065
176x162x65H
BPP12200
200H
BP11200
200H
BP16100
100H
BPP12150
150H
CP11000
Cover
BP16150
150H
BPP12100
100H
Drainer
BP16200
200H
BPP12065
65H
CP16000
Cover
CPP12000
1/1 and 1/2 Lid,
centre handle
FFP11000
Model 1/2
Model 1/2
Model 1/4
BP14065
264x162x65H
BP14100
100H
BP14150
150H
BP14200
200H
CP14000
FFP14000
Model 1/9
100H
Cover
Drainer
BP12065
325x265x65H
BP12100
100H
BP19065
176x108x65H
BPP13200
200H
Model 1/6
BP12150
150H
BP19100
100H
BPP13150
150H
BP16065
176x162x65H
BP12200
200H
BP19150
150H
BPP13100
100H
BP16100
100H
CP12000
Cover
BP19200
200H
BPP13065
65H
BP16150
150H
FFP1200
Drainer
CP19000
Cover
CPP13000
1/1 and 1/3 Lid,
centre handle
BP16200
200H
CP16000
Cover
Model 1/3
Model 1/3
FFP16000
BP13065
325x175x65H
Model 1/4
BP13100
100H
BPP14200
200H
BPP14150
150H
BPP14100
100H
BPP14065
65H
CPP14000
1/1 and 1/4 Lid,
centre handle
BP13150
150H
BP13200
200H
CP13000
Cover
FFP13000
Drainer
Drainer
Model 1/9
BP19065
176x108x65H
BP19100
100H
CP19000
Cover
Model 1/6
Gastronorm Model Numbers & Sizes
BPP16200
200H
BPP16150
150H
BPP16100
100H
BPP16065
65H
CPP16000
1/1 and 1/6 Lid,
centre handle
GASTRONORM
124
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
Fabrication
Supplies
Oxford Hardware Limited Tel: 01295 680068
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
125
Fabrication Supplies
Silicone Sealant
1
2
•
High modulus acetoxy cure silicone
•
Sturdy 10” gun suits 310 & 380ml
cartridges
•
All products manufactured to BS
•
Orders can be placed for less than
boxed quantities
3
Product Code
S90-1010
S90-1011FS
S90-1012FS
S90-1014
S90-1015FS
S90-1016
S90-1021FS
S90-2020
SGUN
Packaging
Ref.
1
2
2
1
2
1
2
3
6
6
Colour / Type
Clear
Clear - Food Safe
Aluminium - Food Safe
White
White - Food Safe
Black
Black - Food Safe
Standard Duct Seal
Cartridge Gun
Temperature Cartridge
Limit °C
Size (ml)
120
310
200
310
200
310
120
310
200
310
100
310
250
310
25
310
310/380
Quantity
in Box
20
20
20
20
20
20
20
25
1
S90-1010
Clear
S90-1011FS
Clear - Food Safe
S90-1012FS
Aluminium - Food Safe
S90-1014
White
S90-1015FS
White - Food Safe
S90-1016
Black
S90-1021FS
Black - Food Safe
S90-2020
Standard Duct Seal
SGUN
Cartridge Gun
Stainless Steel Cleaner and Polish
FABRICATION SUPPLIES
126
•
Economical
•
Cleans and polishes
•
Coats surface with protective film
•
Resists finger prints
•
Non-carcinogenic
•
Foodsafe
OH.SHINE500
OH.SHINE75
Oxford Hardware Limited Tel: 01295 680068
OH.SHINE75
Trigger spray, 750ml, (6 pk.)
OH.SHINE500
Container, screw top, 5 litres, (2 pk.)
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
Fabrication Supplies
Dronco Cutting and Polishing Discs
Pic
110 1240
4” Dronco Express Inox 1mm Cutting Disc (25 pk.)
1
672 0436
4” Dronco Sanding Fibre Disc 60 Grit (25 pk.)
2
672 0437
4” Dronco Sanding Fibre Disc 80 Grit (25 pk.)
3
672 0438
4” Dronco Sanding Fibre Disc 100 Grit (25 pk.)
4
672 0439
4” Dronco Sanding Fibre Disc 120 Grit (25 pk.)
5
111 1240
4 ½” Dronco Express Inox 1mm Cutting Disc (25 pk.)
6
7
1
2
521 1174
4 ½” Dronco Flap Disc 40 GAZ + Flat (10 pk.)
521 1176
4 ½” Dronco Flap Disc 60 GAZ + Flat (10 pk.)
8
521 1177
4 ½” Dronco Flap Disc 80 GAZ + Flat (10 pk.)
9
521 1374
4 ½” Dronco Flap Disc 40 GAZ + Curved (10 pk.)
10
521 1376
4 ½” Dronco Flap Disc 60 GAZ + Curved (10 pk.)
11
521 1377
4 ½” Dronco Flap Disc 80 GAZ + Curved (10 pk.)
12
672 1335
4 ½” Dronco Sanding Fibre Disc 40 Grit (25 pk.)
672 1336
4 ½” Dronco Sanding Fibre Disc 60 Grit (25 pk.)
13
672 1337
4 ½” Dronco Sanding Fibre Disc 80 Grit (25 pk.)
14
672 1338
4 ½” Dronco Sanding Fibre Disc 100 Grit (25 pk.)
15
672 1339
4 ½” Dronco Sanding Fibre Disc 120 Grit (25 pk.)
16
112 1240
5” Dronco Express Inox 1mm Cutting Disc (25 pk.)
3
4
5
7
8
9
10
11
12
13
14
15
16
6
17
17
Scotch-Brite Pads
7486
Oxford Hardware Limited Tel: 01295 680068
For polishing, finishing, blending or cleaning
•
Can use wet or dry
•
Available in pads or perforated rolls
•
Varying levels of grade/grit
•
3M - The leading worldwide brand
•
Smaller quantities available
7448
Hand pad, ultra fine, Grey
7447
Hand pad, fine, Maroon
7440
Hand pad, medium extra durable, Brown
7486
Hand pad, medium, Dark green
7446
Hand pad, coarse, Dark Grey
A07903
Perforated roll, fine, Purple
Fax: 01295 688123 Email: [email protected]
Web: www.oxfordhardware.co.uk
FABRICATION SUPPLIES
Code
Colour
Type
Grade
Dimensions (Mm) Box Qty
7448
Grey
Pads
Ultra fine
155 X 225
60
7447
Maroon
Pads
Fine
155 X 225
60
7440
Brown
Pads
Medium, extra durable
155 X 225
40
7486 Dark green
Pads
Medium
155 X 225
40
7446 Dark grey
Pads
Coarse
155 X 225
40
A07903 Purple Perforated roll
Fine
35 X (115 X 150)
1
•
127
Part Number Index
Symbols
0212000012
49
1075000004
65
1245000124
63
1537-01
53
3.51.1010.0
85
45 730 4752
25
0214000004
49
1075000016
65
1245000128
63
1537-02
53
3.51.1011.0
85
45 730 4760
25
0055000020
70
0214000008
49
1075000020
65
1245000132
63
1537-03
53
3.51.1018.0
85
45 730 4762
25
0055000024
70
0214000012
49
1075000024
65
1245000136
63
1539-000034
53
3.51.1080.0
85
45 730 4765
25
0055000028
70
0220000008
49
1076000016
65
1245000138
63
1539-000035
53
3.51.1081.0
85
45 730 4767
25
0055000065
70
0220000012
49
1076000020
65
1246000004
63
1539-21
53
3.51.1100.0
85
45 736 0201
24
0055000066
70
0220000027
49, 50
1076000024
65
1246000028
63
1539-23
53
3.51.1101.0
85
45 736 0611
24
0055000068
70
0458 005 400
111
1091000004
67
1246000040
63
158-A
96
3.51.1108.0
85
45 749 1506
23
0056005002
71
0458 006 400
111
1091000008
67
1251000008
66
16-M
93
30-M
94
45 749 1508
23
0056005003
71
0458 007 010
111
1092000004
68
1251000012
66
16-R
93
30-R
94
45 763 1458
14, 26
0056005005
71
0458 007 020
111
1092000008
68
1251000016
66
1625
46
31-M
94
45 774 2078
26
0056005008
71
0533D00004
55
1093000004
68
125GRBEX
19
169-A
96
32-M
94
45 774 3078
26
0056006002
71
0533D00024
55
1093000008
68
125GRUBEX
19
16 7 3863
23
33-M
94
45 775 1002
26
0056006003
71
0535H00004
55
1094000002
68
125NBEX
19
17130
19
34-M
94
45 775 5003
26
0056006005
71
0535L00004
55
1094000003
68
125NUBEX
19
17130FR
19
35-M
92
45 780 3000
23
0056006008
71
0535M00004
55
1094000012
68
1267000014
51
17131
19
35-R
92
45 780 3020
23
005600T002
71
0538000004
55
1094000013
68
1275000020
64
17131FR
19
35359
112
45 780 3031
23
005600T003
71
0538C00004
55
1094000024
68
1275000024
64
173
56
35360
112
45 792 1000
33
005600T005
71
0538CM0004
55
1094000025
67, 68
1275000028
64
174
56
35889
112
45 792 5000
33
0056CH0086
71
0544000004
54
1094000028
68
1275000032
64
18-M
92
3605
6
45 792 9360
33
0056CH5020
71
0544000014
54
1094000029
67, 68
1276000020
64
18-R
92
3610
6
46-M
93
0056CH6021
71
0550000032
70
1094S00003
68
1276000024
64
1830000004
76
3615
6
46 2232
22
0056CL0086
71
0660000006
59
1094S00012
68
1276000028
64
1830000008
76
3620
6
46 2248
22
0056CL5020
71
0660000036
59
1094S00013
68
1276000032
64
1830000016
76
37-M
94
46 760 1010
23
0056CL6021
71
0660000064
59
1095000013
67
1277000004
64
1832000004
76
38-M
94
46 765 1050
0056CM0004
71
08.2057
35
110 1240
127
1277000008
64
183200000806
76
39-M
93
47 325
0056CX5020
71
0812000002
58
111 1240
127
1277000010
64
1832000016
76
4-A
96
4805
6
0056H05020
71
0812000003
58
112 1240
127
1277000012
64
1832SA0001
76
40-A
95
481
73
0056H06021
71
0812000004
58
1138
77
1277000014
64
1832SA0004
76
40 065 6 31
24
4810
6
0056L00086
71
0912/401
23
1145
77
1277000016
64
1832SS0001
76
40 542 2842
45
4815
6
0056L05020
71
0912/411
23
1147
77
1277000018
64
1832SS0004
76
40 756 1096
32
482
73
0056L06021
71
0930A0004
57
1155000437
77
1277000020
64
1834000004
76
40 757 0072
32
4820
6
0056XL0086
71
0930AX0004
58
1155000500
77
1277L00008
64
1836000004
76
40 757 2000
32
483
73
0056XL5020
71
0930B0004
57
1155000625
77
1277L00010
64
1836SA0001
76
40 757 3000
32
4830
6
0056XL6021
71
0930C0004
57
1155000688
77
1277L00012
64
1836SS0001
76
40 758 5513
32
486
73
0058005001
70
0930CX0004
58
1155000750
77
1277L00016
64
19-A
96
40 758 5523
32
487
73
0058005002
70
0930D0004
57
1155000812
77
1277S00008
64
19-M
92
40 760 1086
32
487A
69
0058005003
70
0930E0004
57
1155001125
77
1277S00010
64
195-M
94
40 762 1093
32
489
0058005310035K
70
0930F0004
57
1156A00002
77
1277S00012
64
19 1 3424
22
41-A
95
492006
0058CH5020
70
0931000004
57
1156B00004
77
1277S00014
64
20-A
95
41ER110B1
6
5-A
96
0058CL5020
70
0931000008
57
1172000010
78
1277S00016
64
21-A
95
41ER110W1
6
5001SP0004
22
0058H05021
70
0931000012
57
1172000014
78
1277S00018
64
2405
6
41 176 4460
17
500 BL3
0058L05021
70
0931AX0004
58
1174000010
78
1277T00004
64
2410
6
41 260 1030
33
500 BL6
113
0059005001
70
0931CX0004
58
1174000014
78
1277T00008
64
2420
6
41 260 5010
33
500 BX
113
0059005002
70
0931HX0004
58
12015
6
1277T00010
64
25-M
92
41 617 4270
31
500 ML3
112
0059005003
70
1/26915
26
12020
6
1277T00012
64
25-R
92
41 619 4955
31
500 ML6
112
01.1210.02
35
10-A
96
12025
6
1277T00014
64
26-M
93
41 619 4960
31
500 MX
112
01.1323
35
100-M
92
12030
6
1277T00016
64
26-R
93
41 721 2580
24
500 SL3
113
01.1333
35
100GRBEX
18
121-M
93
1277T00018
64
26100NPVF36
34
41 722 2410
24
500 SL6
113
01.1343
35
100GRBEX25RD
18
1214000012
65
1277T00020
64
26100NPVF48
34
41 722 2420
24
500 SX
113
01.1353
35
100GRBEX25SQ
18
1214000016
65
1321010
19
26100NPVF60
34
41 722 2430
24
500 WX
112
0100SL0000
25
100GRBEXADJ
18
1214000020
65
1321030
19
2650NPVF36
34
41 730 2400
24
50NBP
18
0139000004
52
100GRBP
18
1214000024
65
1321430
19
2650NPVF48
34
41 730 5920
24
50NUBP
0139000032
52
100GRBP57
18
1216000001
50
1321450
19
2650NPVF60
34
41 732 2401
24
50Y
118
0139000040
52
100GRUBEX
18
1216000027
50
1321720
18
2675NPVF36
34
41 740 1010
22
521 1174
127
0160
74
100GRUBEX25RD
18
1216000031
50
1321950
18
2675NPVF48
34
41 746 1012
22
521 1176
127
0167
74
100GRUBEX25SQ
18
1220000008
50
1321970
18
2675NPVF60
34
41 748 0112
26
521 1177
127
0167S
74
100GRUBEXADJ
18
1220000012
50
1322010
19
3.31.0760.0
83
41 748 0117
26
521 1374
127
0170000008
54
100GRUBP
18
1241000004
66
1322030
19
3.31.0765.0
83
41 748 0131
26
521 1376
127
0170000018
54
100GRUBP57
18
1241000008
66
1322720
18
3.31.0766.0
84
41 748 0134
26
521 1377
127
0170B00024
54
100NBEX
18
1241H00004
66
1341000003
66
3.31.0768.0
84
41 748 0144
26
556005002
69
0170B00034
54
100NBEXADJ
18
1241S00004
66
1341000004
66
3.31.2000.1
83
41 750 1010
22
556005003
69
0170S00004
54
100NBP57
18
1245000004
63
1352020
18
3.31.2010.1
83
41 758 5511
32
556005004
69
0170S00008
54
100NUBEX
18
1245000016
63
1352760
18
3.31.2011.1
83
41 758 5521
32
556CL5020.106
69
0170S00014
54
100NUBEXADJ
18
1245000020
63
1377S00004
67
3.31.2012.1
83
41 760 1010
22
55 303 1000
16
0170S00018
54
100NUBP57
18
1245000024
63
1377S00008
67
3.31.2700.1
84
41 762 1010
22
55 303 2000
16
0172000006
55
102-A
96
1245000028
63
138-A
96
3.31.2700.2
84
41 762 1014
22
55 303 2500
16
0172B00006
55
104-A
96
1245000032
63
1409000004
65
3.31.2702.1
84
41 763 1012
22
55 303 2501
16
0172BC0006
55
1061000004
52
1245000044
63
1467R00001
51
3.31.2702.2
84
42-A
95
55 303 4000
16
0172C00006
55
1061000036
52
1245000048
63
1467R00002
51
3.31.2704.1
84
43 764 1449
14, 26
55 303 4001
16
0172CM0004
55
1061BB0004
52
1245000052
63
1467R00003
51
3.31.2704.2
84
442006
116
55 303 4004
16
0173000004
56
1061BB0036
52
1245000056
63
1467R00004
51
3.31.2706.1
84
45-A
96
56-M
93
0173B00004
56
1070000004
52
1245000060
63
1467R00005
51
3.31.2706.2
84
45-M
92
6-A
96
0173BC0004
56
1070000032
52
1245000064
63
1467R00006
51
3.31.2707.1
84
45-R
92
6/11X12/6
44
0173C00004
56
1070000040
52
1245000068
63
1467R00014
51
3.31.2707.2
84
45 710 0370
25
6/11X12/6SS
44
0174000004
56
1070A00016
52
1245000072
63
15-M
92
3.31.2708.1
84
45 713 4488
31
6/12X12/8C99
44
0174B00004
56
1070A00024
52
1245000076
63
15-R
92
3.31.2708.2
84
45 716 0201
31
6/12X12/8SS
44
0174B00014
56
1071000032
52
1245000080
63
15308G
19
3.31.2795.0
84
45 719 4967
31
6/3X12/6
44
0174BC0004
56
1071000040
52
1245000082
63
15308GFR
19
3.31.2796.0
84
45 720 0490
25
6/3X12/6SS
44
0174C00004
56
1071A00036
52
1245000088
63
15312G
19
3.31.2797.0
84
45 730 3000
25
6/5X12/6
44
0174C00012
56
1071A00044
52
1245000112
63
15312GFR
19
3.51.1000.0
85
45 730 4740
25
6/5X12/6SS
44
0212000004
49
1074000008
65
1245000116
63
1535-01
53
3.51.1001.0
85
45 730 4742
25
6/6X12/6
44
0212000008
49
1074000020
65
1245000120
63
1535-11
53
3.51.1008.0
85
45 730 4750
25
6/6X12/6SS
44
Part Number Index
22
118
73
116
113
18
Part Number Index
6/7X12/6
44
923-1002
85
95.8239
35
AJRT006
104
BA24065
121
BP16150
124
CAB.RED2.5
6/7X12/6SS
44
923-1003
85
9605
6
AJRT007
104
BA24100
121
BP16200
124
CAB.WHITE
6
6/8X12/6SS
44
923-1004
85
9610
6
AJSG019
104
BA24150
121
BP19065
124
CAB.WHITE2.5
6
6/9X12/6
44
923-1005
85
9615
6
AJSG019A
104
BA28020
121
BP19100
124
CAB.YEL/GRN
6
6/9X12/6SS
44
923-1006
85
9620
6
AJSG019F
104
BA28040
121
BP19150
124
CAB.YEL/GRN2.5
600 BR
113
923-1007
85
9630
6
AJSGB046
104
BA28065
121
BP19200
124
CD00430
600 BSCR
113
923-101-04
82
964252
117
AJSR008
104
BA28100
121
BP21200
124
CD00431
36
600 DSMR
112
923-101-05
82
967152
117
AJTD027
104
BA28150
121
BPP11065
124
CG-1
89
600 MSMR
112
923-101-06
82
967202
117
AJVBF042
104
BAWET11160.INS
123
BPP11100
124
CG-14/EO
89
600 SR
113
923-101-07
82
9771
95
AJVC029
104
BAWET11160.W
123
BPP11150
124
CG-15/EO
89
600 WSMR
112
923-101-08
82
9772
95
AJVCH028
104
BF1
103
BPP11200
124
CG-2
89
6010
6
923-101-09
82
981142
117
AJWALLFIXFIT 102, 103
BF1-CKD
103
BPP12065
124
CG-3
89
6015
6
923-101-1050-01
82
981148
117
AJWB017
104
BF11020
121
BPP12100
124
CG-4/EO
89
6020
6
923-101-1050-02
82
AJWP015
104
BF11020CARV
122
BPP12150
124
CG-5
89
60 RH
86
923-101-1050-03
82
ALF1016
12
BF11040
121
BPP12200
124
CG-6
89
61 LH
86
923-101-11
82
ALF1020
12
BF11065
121
BPP13065
124
CG-7
89
62
86
923-101-12
82
ALF1025
12
BF12020
121
BPP13100
124
CG-8
89
66-M
93
923-101-1300-01
82
ALF1216
12
BF12020CARV
122
BPP13150
124
CG-9
89
669515
117
923-101-1300-02
82
ALF1220
12
BF12040
121
BPP13200
124
CL.512/100.PN10
44
669615
117
923-101-1300-03
82
ALF1225
12
BF12065
121
BPP14065
124
CLR2
13
672 0436
127
923-101-14
82
ALF1616
12
BF13040
121
BPP14100
124
CLR4
13
672 0437
127
923-101-1500-01
82
ALF1620
12
BF13065
121
BPP14150
124
CLSM2
13
672 0438
127
923-101-1500-02
82
ALF1625
12
BF14065
121
BPP14200
124
CLSM4
672 0439
127
923-101-1500-03
82
ALF2016
12
BF16065
121
BPP16065
124
CO11000
122
672 1335
127
923-101-16
82
ALF2020
12
BF2
103
BPP16100
124
CO12000
122
672 1336
127
923-101-17
82
ALF2025
12
BF2-CKD
103
BPP16150
124
CO13000
122
672 1337
127
923-101-1700-01
82
ALF2516
12
BF21020
121
BPP16200
124
CO14000
122
672 1338
127
923-101-1700-02
82
ALF2520
12
BF21040
121
BPP19065
124
CO16000
122
672 1339
127
923-101-1700-03
82
ATBRMC50B
24
BF21065
121
BPP19100
124
CO19000
122
ATBRMC50CP
24
BF23020
121
BSSF1620
12
CO23000
122
BF23020CARV
122
BSSF2020
12
CO24000
122
BF23040
121
BSX-S3-1200
32
CO28000
122
BF23065
121
BSX-S3-1500
32
COP11000
122
BF3
103
BSX-S3-1800
32
COP12000
122
BF3-CKD
103
BSX-S3-2000
32
COP13000
122
BFI 11040
121
BSX-S3-600
32
COP14000
122
BFI 11065
121
BSX-S3-900
32
COP16000
122
BFI 11100
121
BSX-S5-600
32
COP19000
122
BFI 11150
121
BTI 11020
123
COP23000
122
BFI 11200
121
BTI 11040
123
COP24000
122
BFL11065
121
BTI 11065
123
COP28000
122
BFL11100
121
BTI 12020
123
CP11000
124
BFL11150
121
BTI 12040
123
CP12000
124
BFL11200
121
BTI 12065
123
CP13000
124
BFL12100
121
BTI 21020
123
CP14000
124
BFL12150
121
BTI 21040
123
CP16000
124
BFL12200
121
BTI 21065
123
CP19000
124
BFL13100
121
BTI 23020
123
CP21000
124
BFL13150
121
BTI 23040
123
CPP11000
124
BFL13200
121
BTI 23065
123
CPP12000
124
BFL14100
121
6
CPP13000
124
BFL14150
121
19
CPP14000
124
BFL14200
121
CPP16000
124
BFL16100
121
CPP19000
124
CT11000
122
CT12000
122
CT13000
122
CT14000
122
CT16000
122
CT23000
122
CWIV15
118
CWIV22
118
CWIV28
118
7-A
96
923-101-20
82
70-M
94
923-101-21
82
A
A07903
127
ADS20
10
ADSBRACKET
10
AFM10
17
AFM8
17
AFM8TG
17
AJ-B-106
114
AJ-B-112
114
AJ-B-116
114
AJ-B-1DJ18
114
AJ-B-1SG6
114
AJ-B-206
114
AJ-B-212
114
AJ-B-216
114
AJ-B-2DJ18
114
AJ-B-2SG6
114
AJ-B-306
115
AJ-B-312
115
BA11020
121
AJ-B-316
115
BA11020ENAM
121
AJ-B-3DJ18
115
BA11040
121
AJ-B-3SG6
115
BA11040ENAM
121
AJ-W-406
115
BA11065
121
AJ-W-412
115
BA11065ENAM
121
AJ-W-416
115
BA11100
121
AJ-W-4DJ18
115
BA11150
121
AJ-W-4SG6
115
BA11200
121
AJ20Y043
104
BA11200mod
123
AJ30AI045
104
BA12020
121
AJ40AI045
104
BA12040
121
AJA044
104
BA12065
121
AJBC047
104
BA12100
121
AJBF040
104
BA12150
121
AJBFB048
104
BA12200
121
AJCHC025
104
BA13020
121
AJD001
104
BA13040
121
AJD002
104
BA13065
121
AJD003
104
BA13100
121
AJD004
104
BA13150
121
AJFP022
104
BA13200
121
AJFP022L
104
BA14020
121
BFL16150
121
C.01.30.PN
34
AJGH020
104
BA14040
121
BFL16200
121
C.01.38.PN
34
121
C.01.40.PN
34
B
700 BML
113
923-101-2100-01
82
700 BMR
113
923-101-2100-02
82
7035
26
923-101-2100-03
82
71-M
94
923-101-22
82
72-M
94
923-101-23
82
7205
6
923-101-24
82
7210
6
923-101-25
82
7215
6
923-101-26
82
7220
6
923-101-27
82
729008
117
923-101-28
82
729012
117
923-200-0900-01
81
729108
117
923-200-1050-01
81
729150
117
923-200-1300-01
81
94
923-200-1500-01
81
735400
117
923-200-1700-01
81
736101
117
923-200-2100-01
81
736102
117
923-200-2500-01
81
739100
117
923-201-06
82
739102
117
923-201-08
82
74-M
94
923-201-09
82
7440
127
923-201-1050-01
82
7446
127
923-201-11
82
7447
127
923-201-13
82
7448
127
923-201-1300-01
82
7486
127
923-201-15
82
75-M
94
923-201-1500-01
82
AJGRK041
104
BA14065
121
BFL21100
75GRBEX
18
923-201-1700-01
82
AJGT023
104
BA14100
121
BFL21150
121
C.01.45.PN
34
75GRBEX25
18
923-201-2100-01
82
AJHA010
104
BA14150
121
BFL21200
121
C.01.48.PN
34
75GRBP
18
923-4-1040
84
AJLT026
104
BA14200
121
BFL23100
121
C.511F/100.ZCH
44
75GRUBEX
18
923-4-1060
84
AJOP016
104
BA16020
121
BFL23150
121
C.512.PN
44
75GRUBEX25
18
923-4-1080
84
AJOS009
104
BA16040
121
BFL23200
121
C.512/100.ZCH
44
75GRUBP
18
923-4-1100
84
AJPR-10
102
BA16065
121
BL11000
123
C.512F/100.ZCH
44
75NBEX
18
923-4-1120
84
AJPR-10CKD
102
BA16100
121
BL12000
123
C.512F/100.ZCH-H 44
75NUBEX
18
923-6-1001
97
AJPR-15
102
BA16150
121
BMD
76-M
94
923-6-1002
97
AJPR-15CKD
102
BA16200
121
78-M
95
923-6-1003
97
AJPR-20
103
BA19065
121
79-M
95
923-6-1004
97
AJPR-20CKD
103
BA19100
8-A
96
923-6-1005
97
AJPR-30
103
117
923-6-2001
97
AJPR-30CKD
88SS
44
923-6-2002
97
88ZP
44
923-6-2003
97
89SS
44
923-6-3001
89ZP
44
923-6-3002
9-A
96
923-100-0900-01
73-M
BTP
BUF 115530
C
6
6
36
13
D
111, 118
C3200CH
BP11065
124
C3200CV
36
D100-1-12
25
BP11100
124
C3200F
36
D100-1-20
25
121
BP11150
124
C3400CH
36
D100-1-26
25
BA19150
121
BP11200
124
C3400CV
36
D100-1-6
25
103
BA21020
121
BP12065
124
C3400F
36
D101-1-(235)
25
AJPR-40
103
BA21040
121
BP12100
124
C3500CH
36
D102-1-(235)
AJPR-40CKD
103
BA21065
121
BP12150
124
C3500CV
36
D273015
97
AJPR-50
105
BA21100
121
BP12200
124
C3500F
36
DL24
46
97
AJPR-50W
105
BA21150
121
BP13065
124
C44-400
28
DL42
46
923-6-3003
97
AJPR-RS
103
BA21200
121
BP13100
124
C44-450
28
DL60
46
81
923-6-3004
97
AJRGS032
104
BA23020
121
BP13150
124
C44-500
28
DS 10
27
923-100-1050-01
81
923-6-3005
97
AJRH018
104
BA23040
121
BP13200
124
CAB.BLACK
6
DS 12
27
923-100-1300-01
81
923-8-1001
83
AJRR021
104
BA23065
121
BP14065
124
CAB.BLACK2.5
6
DS 14
27
923-100-1500-01
81
923-8-1002
83
AJRS031
104
BA23100
121
BP14100
124
CAB.BLUE
6
DS 16
27
923-100-1700-01
81
923-8-1003
83
AJRS035
104
BA23150
121
BP14150
124
CAB.BLUE2.5
6
DS 18
27
923-100-2100-01
81
92 400
25
AJRS037
104
BA23200
121
BP14200
124
CAB.BROWN
6
DS 20
27
923-100-2500-01
81
95.7002.BOX
35
AJRSD038
104
BA24020
121
BP16065
124
CAB.BROWN2.5
6
DS 22
27
923-1001
85
95.8235
35
AJRT005
104
BA24040
121
BP16100
124
CAB.RED
6
DS 24
27
846327
Part Number Index
36
25
117
Part Number Index
DS 5322-0030-2
29
FS 4/26-90°
98
IRL300JVGT
4
MSRK15
105
P55-13
17
SSC32.10
34
V454530
DS 5322-0035-2
29
FS 4/43-180°
99
IRL300LHRB
3
MV
121
P55-14
17
SSC38.10
34
V455215.INS 109, 110
DS 5322-0040-2
29
FS 4/43-90°
98
IRL300LHRJ
3
MV75
116, 118
P55-15
17
SSC38.5
34
V503030
109
DS 5322-0045-2
29
FS 4/50-180°
99
IRL300PJ
3
P55-16
17
SSC50.10
34
V504020 LH/RH
109
DS 5322-0050-2
29
FS 4/50-90°
98
IRL300PJGT
4
P55-17
17
SSF1020
12
V504025 LH/RH
109
DS 5322-0055-2
29
FS 4/80-180°
99
IRL300SUR
2
P6000
30
SSF1616
12
V504030 LH/RH
109
DS 5322-0060-2
29
FS 4/80-90°
98
IRL309
2
P6000/400
30
SSF1818
12
29
99
IRL500B
2
P6000/450
30
109
DS 5322-0070-2
FS 5/102-180°
V505025
SSF2016
12
98
IRL500JV
2
P6000/500
30
109
29
FS 5/102-90°
V505030
DS 5322-0080-2
SSF2424
12
27
99
IRL500LHR
3
P6005
30
109
DZ 3832-B0025
FS 5/150-180°
V505525 LH/RH
SSG
105
DZ 3832-B0030
27
FS 5/150-90°
98
IRL500LHRB
3
P6010
30
V505530 LH/RH
109
DZ 3832-B0035
27
FS 5/180-180°
99
IRL500LHRJ
3
P6015
30
V604525 LH/RH
109
DZ 3832-B0040
27
FS 5/180-90°
98
IRL500PB
3
P6020
30
V604530 LH/RH
109
DZ 3832-B0045
27
FS 5/46-180°
99
IRL500PHR
3
PG10
118
V605030 LH/RH
109
DZ 3832-B0050
27
FS 5/46-90°
98
IRL500PJ
3
V605033 LH/RH
109
DZ 3832-B0055
27
FS 5/50-180°
99
IRL500PJGT
4
DZ 3832-B0060
27
FS 5/50-90°
98
IRLCAPS
3
DZ 3832-B0065
27
FS 5/66-180°
99
DZ 3832-B0070
27
FS 5/66-90°
98
FS 5/80-180°
99
FS 5/80-90°
98
FS 6/210-180°
99
E
E.3030.PPG
16
E.4040.PPG
16
EXT
10
F
F01
118
F02
118
F04
118
G
G01 N
9
G02
9
G02R
9
G04
9
G05
9
J
JJ10053
O
OH.SHINE500
126
OH.SHINE75
126
OHBL01
13
OHBL02
13
OHDIMAP
5
OHDIMAV
5
OHDIMBPRFI
5
OHDIMCVHS
5
OHSL01
3
OHT09
118
OHT10
118
OHT11
118
P
123
K
PIV.225.ZCH
45
PIV.226.ZCH
45
PIV.227.ZCH
45
PIV.228.ZCH
45
PIV 219 ZCH
45
PIV 220 ZCH
45
PIV 221 ZCH
P13RD
16
P16RD
16
PRV50
P20RD
16
45
118
T
109
T245
35
T280
35
T310
35
V765130 DESCALED
TAM.236.165 PLN
33
LH/RH
TD01
30
V765138 DESCALED
TD02
30
LH/RH
109
TD02L
30
VA2011SS
109
TD15
30
VA3815SS
109
TD25
30
VA504020CEN
109
TD25L
30
VACAIRPOT2.5LTS
123
TH245
35
VACAIRPOT3.0LTS
123
TH280
35
VACAIRPOT4.0LTS
123
35
VA 180
109
K100000000
78
P20SQ
16
Q
K200000000
78
P25RD
16
K300000000
78
P25RDCP
16
QCL1000
5
TH310
K400000000
78
P25SQ
16
QCL300
5
THL100B
2
QCL500
5
VA 90
THL150B
2
QUARTZBARE1000
4
VBSW10P
THL200B
2
QUARTZBARE300
2
VBSW9P
109
QUARTZBARE500
3
THL300B
2
VBWSTOFSS
109
KBA19065
121
P25SQTI
17
KV8 LID
122
P30-32RD
16
122
P30SQ
16
P30SQTI
17
P32RDCP
16
P38RD
16
P38RDCP
16
QUARTZJACKET300PI 3
P4020REC
16
QUARTZJACKET500
P40SQ
16
QUARTZJACKET500PI 3
P40SQTI
17
P50-10
17
P50-11
17
P50-12
17
P50-13
17
P50-14
17
P50-15
17
P50-16
17
P50-17
17
P5025REC
16
P5030REC
16
G6558
117
KV8 POT
G664415
117
L
F08
118
F2131
109
GE14120
123
F2132
109
GE14150
123
F2133
109
GE14170
123
FBG
105
GE181612
123
FF11000
123
GE2025
123
FF11WIRE
123
GE212015
123
FF11 CHIP
123
GE212017
123
FF12000
123
GE212020
123
FF12WIRE
123
GE331612
123
FF13000BBF
123
GE331615
123
FF13WIRE
123
GE331618
123
FF14000BBF
123
GE361612EC
123
FF21000
123
GE361612EX
123
FF23000
123
GE361615
123
FFP11000
124
GE361618
123
FFP1200
124
GE361680
123
FFP12000
124
GE362512
123
FFP13000
124
GE362515
123
FFP14000
124
GE362518
123
FFP16000
124
GE422015
123
FFP21000
124
GE422017
123
FIXFIT
6
GE422020
123
FP1
9
GE422025
123
FPS 330
10
GELAV.CU
123
FPS 55
10
Grohe
111
FS 1/12-180°
99
GXTC10
107
MERK15
FS 1/12-90°
98
GXTC20
107
FS 2/15-180°
99
GXTC20BF
107
FS 2/15-90°
98
GXTC30
FS 2/20-180°
99
GXTC30BF
FS 2/20-90°
98
FS 2/26-180°
99
FS 2/26-90°
98
FS 2/34-180°
99
FS 2/34-90°
98
FS 3/102-180°
99
FS 3/102-90°
98
FS 3/17-180°
99
FS 3/17-90°
98
IR300CH
FS 3/20-180°
99
IRL1000LHR
FS 3/20-90°
98
IRL1000LHRB
FS 3/26-180°
99
FS 3/26-90°
98
FS 3/34-180°
FS 3/34-90°
FS 3/40-180°
FS 3/40-90°
FS 3/44-180°
L286117
123
L286117.LARGE
123
L316
46
L316CH
46
L316D
46
L316D-CH
46
L520
46
L521
46
L521-i
46
L5931
5
L5933
5
L5934
5
L5981
5
L5987
5
LS316
46
LS316CH
46
LS316D
46
LS316D-CH
46
LS520
46
LS521
46
LS521-i
46
QUARTZJACKET1000 4
QUARTZJACKET1000PI
4
3
2
RECS
10
RJ089
123
RL443
123
RL674
123
RS3/30-180
100
RS3/30-90
100
RS3/30R
100
RS3/55-180
100
RS3/55-90
100
59
109
2
VBWSTSS
109
TPA1
75
VCHAIN
109
TPA2
75
TPA3
75
VE050
10
TPA4
75
VE075
10
TPACOMPLETE
75
VE100
10
VE125
10
VE150
10
VE200
10
VE250
10
VE300
10
TPSW
118
TUNGLAMP300
R
R713908R
THL500B
59
2
V
V13150
109
VE400
10
V2011HEMI.INS
109
VEGP075 LH/RH
11
V252516
109
VEGP100 LH/RH
11
V252520
109
VEGP125 LH/RH
11
V2613HEMI.INS
109
VEGP150 LH/RH
11
V2618000 INS
109
VEGP200 LH/RH
V2618000 WELD
109
VFSW1PC-70
V293220 CENT
109
VFSW2PC-70
109
V293520 LH/RH
109
VPIL01580
109
V293522 LH/RH
109
VPIL018
109
V294020 LH/RH
109
VPLUG
109
V3012000 INS
109
VSOUND250
109
V3014HEMI.INS
109
VSOUND250BOX
109
V3018000 INS
109
VTE2018
109
V3018000 WELD
109
VTE2518
109
11
109
P50RDCP
16
P51-10
17
P51-11
17
P51-12
17
P51-13
17
P51-14
17
P51-15
17
P51-16
17
S
P51-17
17
S/PIPE200
109
105
P52-10
17
S/PIPE250
109
MG-1
90
P52-11
17
S/PIPE300
109
MG-10
90
P52-12
17
S90-1010
14, 126
107
MG-11
90
P52-13
17
S90-1011FS
14, 126
V333320 INS
109
107
MG-12
91
P52-14
17
S90-1012FS
14, 126
V333320 WELD
109
GXTC40
107
MG-12A
91
P52-15
17
S90-1014
14, 126
V343020 LH/RH
109
GXTC40BF
107
MG-13
91
P52-16
17
S90-1015FS
14, 126
V344020 LH/RH
109
MG-14
91
P52-17
17
S90-1016
14, 126
V344025 LH/RH
109
MG-15
91
P53-10
17
S90-1021FS
14, 126
V344030 LH/RH
109
MG-16
91
P53-11
17
S90-2020
14, 126
V3615HEMI.INS
109
MG-17
91
P53-12
17
SCV01
MG-18
91
P53-13
17
SDT.25.PN
MG-19
91
P53-14
17
SDT.30.PN
5
MG-2
90
P53-15
17
4
MG-20
91
P53-16
17
4
MG-22
91
P53-17
17
SE11000
122
Centre
109
IRL1000LHRJ
4
MG-3
90
P54-10
17
SE12000
122
V404020
109
IRL1000PHR
4
MG-4
90
P54-11
17
SF0553
89
V404025
109
99
IRL1000PJ
4
MG-5
90
P54-12
17
SGUN
14, 126
V404030
109
X110
98
IRL100B
2
MG-6
90
P54-13
17
SL24
46
V404520 LH/RH
109
X11GRID
99
IRL100JV
2
MG-7
90
P54-14
17
SL42
46
V404525 LH/RH
109
X130
98
IRL100LHRJ
3
MG-7A
90
P54-15
17
SL60
46
V404530 LH/RH
109
X210
99
IRL200B
2
MG-8
90
P54-16
17
SMA
122
V4216HEMI.INS
109
X21GRID
FS 3/44-90°
98
IRL200JV
2
MG-9
90
P54-17
17
SME
122
V4218000 INS
109
X230
FS 3/50-180°
99
IRL200LHRJ
3
MRK15
105
P55-10
17
SMM
122
V4218000 WELD
109
X23GRID
FS 3/50-90°
98
IRL300B
2
MRL
121
P55-11
17
SPC-ZCH-2.5
45
V454520
109
X310
5
FS 4/26-180°
99
IRL300JV
2
MS
121
P55-12
17
SS.STUD
31
V454525
109
X330
5
H
HDG
105
I
M
Part Number Index
RS3/55R
100
RS3/85-180
100
RS3/85-90
100
RS3/85R
100
V332318 INS LH/RH
109
V332318 WELD LH/RH
109
VTE2518EURO
109
VTE3018
109
VTE3018EURO
109
VTI2018
109
VTI2518
109
VTI3018
109
Vwaste3/4
123
VWHB000
110
VWHB001
110
VWHBRELECT91
110
VWHBTO91S
110
V3618000 INS
109
33
V3618000 WELD
109
33
V3818000 INS
109
SDT.38.PN
33
V395115.INS 109, 110
WASTEHOLE CUT
109
SDT.3838.PN
33
V401815 INS LH/RH/
WPHWU.23LTS.ST
110
118
W
X
5
122
5
5
122
5
122
Oxford Hardware Limited
Burland House
Oxhill
Warwick
CV35 0RD
Tel: 01295 680068
Fax: 01295 688123
Email: [email protected]
Web Site: www.oxfordhardware.co.uk
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement