Zmodo CM-T1001BG Weatherproof Pan & Tilt Camera User's Guide

Below you will find brief information for Weatherproof Pan & Tilt Camera CM-T1001BG. The Weatherproof Pan & Tilt Camera CM-T1001BG is a security camera that offers a full 360° pan and 90° tilt rotation, making it ideal for monitoring large areas. It features a 1/3” Sony Color CCD image sensor, delivering great video quality, reliable operation, a long operating life, and good value. The camera can be easily mounted indoors or outdoors and includes BNC and RCA connections for video and power, as well as a RS485 connection for PT control.

PDF Download

Document

Weatherproof Pan &amp; Tilt Camera
User’s Guide
CM-T1001BG
1201-1205 ,Sangda Mansion, High Technology Park,
ShenZhen, Guangdong, China
Tel: 0755-3363-1636 Fax: 0755-3363-1639
SAFETY PRECAUTIONS
WARNING
1. Be sure to use only the standard adapter that is
specified in the specification sheet. Using any
other adapter could cause fire, electrical shock, or
damage to the product
2. Incorrectly connecting the power supply or
replacing battery may cause explosion, fire,
electric shock, or damage to the product.
3. Do not connect multiple cameras to a single
adapter. Exceeding the capacity may cause
abnormal heat generation or fire.
4. Securely plug the power cord into the power
receptacle. Insecure connection may cause fire.
5. When installing the camera, fasten it securely and
firmly. A falling camera may cause personal injury
6. Do not place conductive objects (e.g.screwdrivers,
coins, metal things, etc.) or containers filled with
water on top of the camera. Doing so may cause
personal injury due to fire, electric shock, or falling
objects.
7. Do not install the unit in humid, dusty, or sooty
locations. Doing so may cause fire or electric
shock.
8. If any unusual smells or smoke come from the unit,
stop using the product. In such case, immediately
disconnect the power source and contact the
service center. Continued use in such a condition
may cause fire or electric shock.
9. If this product fails to operate normally, contact the
nearest service center. Never attempt to modify
this product in any way. (ZMODO is not liable for
problems caused by unauthorized modifications or
attempted repair.)
10. When cleaning, do not spray water directly onto
parts of the product. Doing so may cause fire or
electric shock.
1
CAUTION
1. Do not drop objects on the product or apply strong
shock to it. Keep away from a location subject to
excessive vibration or magnetic interference.
2. Do not install in a location subject to high
temperature (over 120F), low temperature (below
-5F), or high humidity. Doing so may cause fire or
electric shock.
3. If you want to relocate the already installed
product, be sure to turn off the power and then
move or reinstall it.
4. Remove the power plug from the outlet when then
there is a lightning. Neglecting to do so may cause
fire or damage to the product.
5. Keep out of direct sunlight and heat radiation
sources. It may cause fire.
6. Install it in a place with good ventilation.
7. Avoid aiming the camera directly towards
extremely bright objects such as sun, as this may
damage the CCD image sensor.
8. Apparatus shall not be exposed to dripping or
splashing and no objects filled with liquids, such as
vases, shall be placed on the apparatus.
9. The Mains plug is used as a disconnect device and
shall stay readily operable at any time.
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE REAR COVER. NO USER SERVICEABLE PARTS
INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
This symbol alerts you that important literature concerning
operation and maintenance has been included with this
product.
This symbol indicates high voltage is present inside. It is
dangerous to make any kind of contact with any inside part
of this product.
1201-1205 ,Sangda Mansion, High Technology Park,
ShenZhen, Guangdong, China
Tel: 0755-3363-1636 Fax: 0755-3363-1639
PRODUCT OVERVIEW
Product Overview
See in all directions and keep an eye on the
people and places you care about most with
this color CCD pan/tilt camera. With a full
360&deg; of endless pan and 90&deg; of tilt rotation,
monitoring large areas is no challenge for this
camera. Featuring imaging provided by a 1/3”
Sony Color CCD, it delivers great video quality,
reliable operation, a long operating life, and
good value. This pan/tilt camera is designed for
indoor and outdoor use, and can easily be mounted
for the perfect viewing angle. BNC and RCA
connections are used for video and power and a
RS485 connection for PT control. Installation is
easy and hassle free, just plug and play.
Package includes
Please check your camera and accessories
included in the package. Those components are
as shown below:
Camera
Mount Bracket
Main Features
CCD CA
M ERA
CCD C
1/3&quot; Sony Color CCD Image Sensor
420 TV Lines, Horizontal
8mm Lens
Signal: NTSC
Weatherproof: Indoor or Outdoor
Pan Rotation: 0&deg;~360&deg; (Endless)
Tilt Rotation: 0&deg;~90&deg;
Pan/Tilt Speed: 80&deg;/sec (Max.)
Baud Rate: 1200~9600 bps
32 Presets
Communication: Rs485
Protocols: PELCO-D, PELCO-P
Video Connector: BNC
Power Connector: RCA 12V DC
2
WW
Screws
Screws
A M ER
W .Z
MOD
CC
A
O .C
OM
D
W
W
CA
W
.Z
M
MO
ER
DO
.C
A
OM
Package Box
1) CM-T1001BG Weatherproof Pan Tilt Camera
2) Mount Brackets
1) Cable
6) Screws
1) Package Box
1201-1205 ,Sangda Mansion, High Technology Park,
ShenZhen, Guangdong, China
Tel: 0755-3363-1636 Fax: 0755-3363-1639
SCHEMATIC DIAGRAM
1 Main Body
2
Lens
3 Mount Bracket
4
Ceiling Mounting
3
Mount Bracket
Wall Mounting
1201-1205 ,Sangda Mansion, High Technology Park,
ShenZhen, Guangdong, China
Tel: 0755-3363-1636 Fax: 0755-3363-1639
CONNECTING CABLES
DVR
RCA Cable
Connect to DVR RS-485
Video Balun
-+
BNC Cable
RS485
1
2
3
4
5
SENSOR
6
7
8
ALARAM
RS-485 Wire
Purple = Positive
Grey = Negative
To connect cables
18 Gauge Power Wire
1. Connect the BNC cable to the video connector attached on your camera
2. Connect the BNC cable to the Video Input on a DVR or Video Balun.
3. Connect the power adapter to the RCA Power connector attached on your camera. And then connect the
power adapter to a power source nearby.
4. Run an 18 gauge power wire for the RS-485 (Control Wire) and connect it to the DVR and the Camera
using the above guide.
Note
It is very important that you identify these ends before installing the cable so that you have the correct
ends at the correct location.
4
1201-1205 ,Sangda Mansion, High Technology Park,
ShenZhen, Guangdong, China
Tel: 0755-3363-1636 Fax: 0755-3363-1639
HOW TO INSTALL
Before installation
Please read the following instructions before installing your camera:
You have to check whether the location (ceiling or wall) can bear five times the weight of your
camera.
Do not allow the cable to be caught in a pinched area, otherwise the electric line cover may be
damaged. This may cause cable breakdown or fire.
When installing your camera, don't allow anyone to walk or stand under your installation site,
and remove all valuable items. A dropped camera may cause injury to bystanders or harm to
valuable items.
Installation procedure
To install your camera
step
1
Go through the short cable that
supplied in the package from the
Ceiling Mount Bracket. Fix the Mount
Bracket on the ceiling with the screws
supplied in the package.
5
1201-1205 ,Sangda Mansion, High Technology Park,
ShenZhen, Guangdong, China
Tel: 0755-3363-1636 Fax: 0755-3363-1639
HOW TO INSTALL
step
Rotate the Loop on clockwise
until it is attached to the Mount
Bracket. Then attach the Main Body to
the Mount Bracket by rotating it on
clockwise until it is fixed. The camera is
now installed on the ceiling.
2
step
3
Also you can install the camera
on the wall. The same as before,
go through the short cable supplied in the
package from the Wall Mount Bracket. Fix
the Mount Bracket onto the wall with the
screws supplied in the package.
step
Last, attach the Main Body to the
Mount Bracket by twisting in the
two screws using a screwdriver. The
camera is now installed on the wall.
4
6
1201-1205 ,Sangda Mansion, High Technology Park,
ShenZhen, Guangdong, China
Tel: 0755-3363-1636 Fax: 0755-3363-1639
CAMERA SPECIFICATION
Specifications for NTSC &amp; PAL Standard
Item
Product type
Weatherproof
Power input
Broadcast type
Power Consumption
Image device
Effective Pixels
Scanning mode
Details
Indoor/ Outdoor Pan Tilt Camera
Yes
DC 12V
NTSC Standard color system
PAL Standard color system
(625 Lines, 50 Fields)
(525 Lines, 60 Fields)
Approx. 600mA
1/3 inch SONY Color CCD
510(H) x 492(V), 250,920 pixels
NTSC Standard
PAL Standard
525 Lines
625 Lines
Internal Synchronization
420 TV Lines
1.5 Lux
1.0Vp-p, 75ohms
8mm
32
0&deg;~360&deg; (Endless)
0&deg;~90&deg;
80&deg;/ sec
P/T Speed
Electronic Shutter
1/50 to 1/120,000
&gt; 48dB
S/N Ratio
Auto Back Light Compensation
Controls
Auto Switching between Color and B&amp;W by day and night change(D/N)
Communication
RS-485
PTZ Control
PELCO-D, PELCO-P
Baud Rate
1200~9600 selectable
-5F—120F
Operation temperature
Size (package)
9.1”x 7.7&quot;x 7.3”
2.2 lbs
Weight
Synchronization mode
Horizontal resolution
Minimum illumination
Signal output
Lens
Number. of Presets
Pan Rotation
Tilt Rotation
7
1201-1205 ,Sangda Mansion, High Technology Park,
ShenZhen, Guangdong, China
Tel: 0755-3363-1636 Fax: 0755-3363-1639
FCC Statement
This device complies with part 15of the FCC
Rules. Operation is subject to the following
two conditions:
1) This device may not cause harmful
interference.
2) This device must accept any interference
received including interference that may cause
undesired operation.
Note
This equipment has been tested and found to
comply with the limits for a Class A digital device,
pursuant to part 15 of FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference when the equipment
is operated in a commercial environment. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed and
used in accordance with the instruction manual,
may cause harmful interference to radio
communications. Operation of this equipment in
a residential area is likely to cause harmful
interference in which case the user will be
required to correct the interference at his own
expense.
8
Correct Disposal of This Product
(Waste Electrical &amp; Electronic
Equipment) (Applicable in the
European Union and other
European countries with
separate collection systems)
This marking shown on the product
or its literature, indicates that it shouldnot be
disposed with other household wastes at the end of
its working life. To prevent possible harm to the
environment or human health from uncontrolled
waste disposal, please separate this from other
types of wastes and recycle it responsibly to
promote the sustainable reuse of material
resources.
Household users should contact either the retailer
where they purchased this product, or their local
government office, for details of where and how they
can take this item for environmentally safe recycling.
Business users should contact their supplier and
check the terms and conditions of the purchase
contract. This product should not be mixed with
other commercial wastes for disposal.
SKU: CM-T1001BG
8
46655 00085
5
1201-1205 ,Sangda Mansion, High Technology Park,
ShenZhen, Guangdong, China
Tel: 0755-3363-1636 Fax: 0755-3363-1639
">

Hello! I am an AI chatbot specifically trained to assist you with the CM-T1001BG Weatherproof Pan & Tilt Camera User's Guide. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Show related prompts

Assistant typing

Assistant terminated