Hazmat - Mallory Co
Hazmat
HazMat Suits........................ 98 - 100
Coveralls......................................101
Hazmat Boots...............................101
Hazmat Gloves..............................101
Positive Pressure
Breathing Apparatus..................102
Gas Detection Instruments104 - 114
Instrument Test Systems..............113
Hydrant Decontamination Kits.....115
Hazmat Decontamination
Systems.....................................115
Berms and Tanks................ 116 - 117
Wipers and Sorbents.......... 118 - 120
Spill Kits.......................................120
“It’s impossible to be over-prepared for a crisis,” as we’ve
heard it said, from various fire departments we serve.
Being able to provide response capabilities in hazardous
materials, technical rescue, terrorism incident response, and
firefighting, are goals of our Public Safety Agencies. Departments need to be capable of dealing with emergencies
through an all-hazards approach.
Saint Gobain HazMat suits are on the job in numerous
departments across the country.
Prepare. Plan. Stay Informed.
Our Public Service Agencies provide a great deal of experience effectively managing responses to emergencies involving
the release of oil or hazardous substances.
Each year thousands of oil and chemical spills are reported.
Local police, firefighters and industry first responders handle
most of these. The EPA responds to several hundred large
spills a year. During major disasters, FEMA offers assistance
to state and local governments in response to a release of
hazardous materials and may call upon these Agencies during
a major disaster or emergency.
800-MALLORY
97
Hazmat
Saint Gobain ONESuit®
ONESuit® offer unique properties that contribute to their superior protective qualities.
◆ The most chemically inert known polymer
◆ Proven to be an effective barrier against hundreds of industrial chemicals and warfare agents
◆ Does not absorb chemicals like rubbers and thermo plastics
◆ Requires minimal off gassing for decontamination: in some cases, no off gassing at is required.
◆ Maintains performance at very high (500ºF) and low (-60ºF) temperatures.
ONESuit® TEC/ONESuit® Flash
For environments where full-body protection against chemical/biological agents and industrial chemicals (in both liquid and vapor form) can be, quite literally, a matter of life and death, ONESuit® TEC is an excellent choice. Testing to NFPA 1991 -- Standard on Vapor-Protective Ensembles for Hazardous
Materials Emergencies (2005 Edition), with Liquefied Gas Option included -- has been completed and ONESuit® TEC is fully certified.
ONESuit® Flash delivers the same benefits as ONESuit® TEC, plus additional protection against chemical flash fires. It is also fully certified to NFPA
1991, including the Chemical Flash Fire Option.
Features:
◆ Single-skin design; quick and easy donning and
doffing
◆ High-tech fabric and construction
◆ Soft, lightweight fabric
◆ ONEGlove® Hazmat
◆ Clear and tinted visors
◆ Internal belting system
◆ Enlarged pod area
Benefits:
◆ Maximum protection
◆ Comfort and agility; highly compressible for easy
storage
◆ Comes standard with suit; provides high dexterity,
ease of use and comfort
◆ Come standard with suit; easily changed out for
different light conditions
◆ Secures suit more closely to body for ease of movement
◆ Accommodates larger rebreather systems or SCBAs
ONESuit Flash
ONESuit Tec
◆ NFPA 1991 (2005) certified for Liquefied gas
◆ Single skin no overcover
◆ Ultra lightweight (approx. 9 lbs)
◆ No shelf life- premium materials won’t break down over time
◆ Detachable secondary visor
◆ ONEGlove® Hazmat supplied as standard glove
IS-A
98
HazMat suit
$1,980.00
◆ NFPA 1991 (2005) certified the highest level of protection from
◆ Flash fire and Liquefied gas
◆ Only single-skin suit certified to flash fire option
◆ No over cover
◆ Lightweight (approx. 13 lbs) for remarkable user comfort
◆ No shelf life- premium materials won’t break down over time
◆ Low life cycle cost – less than half that of competing suits
◆ Reusable and decontaminable design based on proven military technology
◆ Detachable secondary visor
◆ ONEGlove® Hazmat supplied as standard glove
ONESuit® Flash have been sized to fit a wide range of users, and come
standard with a pair of ONEGlove® Hazmat protective gloves. Available
in sizes: S-3XL
IS-F
WWW.MALLORYFIRE.COM
HazMat suit
$2,795.00
Hazmat
Tychem® Responder® CSM
A special version of Responder® fabric designed for dealing with
chemical warfare (CW) agents.
Tychem® Responder® Suits/Coveralls
High-level protection against toxic and corrosive gases, liquids and
solid chemicals. Suited for HazMat and domestic preparedness situations.
Totally-encapsulated vapor-protective Level A and liquid-splash protective Level B suits. A patented fabric consisting of multiple film barriers
with unique layers laminated to each side of a 3.0 oz/yd polypropylene
substrate. Lightweight and economical, Tychem® Responder® offers additional comfort and chemical protection typically found in more costly
suits. With more than 230 specific chemicals tested to date, Responder®
fabric offers the broadest level of chemical protection on the market today.
◆ Typical Applications: emergency HazMat teams, chemical handling,
petrochemical industry, hazardous materials/waste cleanup.
Please state size when ordering: (M=2), (L=3),(XL=4)
Please call for pricing on larger sizes.
Item
RS550T*
Encapsulating Suit
Size
Price
Level A Fully-Encapsulating suit with PVC faceshield, expanded back, two exhaust valves, front entry, Integral
gloves & sock boots
m-XL
$876.58
Item
RS125T*
Zip Front Coveralls
Size
Coverall Responder® with storm flap, collar, elastic wrists & ankles M- XL
Coverall
2XL
Coverall
3XL
Coverall
4XL
Price
$52.99
$56.17
$59.54
$64.30
Developed jointly with GEOMET Technologies, one of the largest firms
certified by the U.S. Government to conduct CW testing. GEOMET
performs extensive quality control and quality assurance (QC/QA) testing
on both fabric and garments. Each suit undergoes rigorous inspection and
pressure testing. Additionally, one suit per lot is randomly selected for
seam and material testing with live toxic agents.
Tychem® Responder® CSM protects against a wide range of agents, such
as lewisite, mustard, soman, nerve, sarin and tabun in addition to over
230 other toxic industrial chemicals.
◆ Color: Desert Sand for low visibility and discreet operations
◆ Seams: double-taped
◆ Typical Applications: CW handling at military depot facilities and
cleanup of military sites by both the U.S. Government and their civilian contractors. Civilian response teams adjacent to CW agent incineration facilities in areas which could be targeted by terrorist-based releases
of CW agents.
Please state size when ordering. Please call for pricing on larger sizes.
Item
Encapsulating Suit
Size
Price
RC550T*
Level A Fully Encapsulating Suit with PVC faceshield with Teflon overlay, expanded back, two exhaust valves,
gas tight zipper with triple storm flap. Integral mil-spec butyl gloves and sock boots. Double sealed seams.
SM-XL
$1138.02
Item
RC128T*
Zip Front Coveralls
Size
Price
Responder® CSM Coverall Zipper front with storm flap, attached hood with elastic around face opening. Mil
spec butyl gloves attached with jam fit glove system, sock boots with splash guards. Double sealed seams. Extended double storm flap works with hood (3T771) to
accommodate respirator mask. S-XL
$209.10
Responder® CSM Coverall
2XL
$221.64
3XL
$234.94
Responder® CSM Coverall
Responder® CSM Coverall
4XL
$253.73
800-MALLORY
99
Hazmat
Hazmat Protection
Covers a wide range of applications from moderate liquid chemical splash
to vapor protection. Many garment styles available from coveralls for
moderate splash protection to Level A suits for gas-protective ensembles.
Many configurations of Fully-Encapsulated Level A and B suits are available. Please ask for more information.
BR122T
BR526T
FullyEncapsulated
Rear-entry suit
Wide Face
shield with
respirator
fit. Tychem® TK Level A & B Suits
Ideal for HazMat Operations
Tychem® BR Super Duty
Effective Level B Chemical Suits
Far-reaching protection for hazardous materials handlers
Protects against moderate to heavy chemical splash. Designed for chemical
handling, petrochemical manufacturing, emergency response, military,
and weapons of mass destruction handling and response. Each suit has a
multi-layer film barrier laminated to a durable polypropylene substrate.
The strong, abrasion-resistant fabric is also lightweight and flexible. Puncture resistant. Provides one of the broadest ranges of chemical protection
available with test data against more than 250 chemicals. Eliminates the
need to inventory many different garments.
Tychem®BR Color: Bright Yellow. Seams: Taped. 2/cs. Made in USA.
Please state size when ordering: (M=2), (L=3), (XL=4), (2XL=5)
Please call for pricing on larger sizes.
Item
Zip Front Coverall
Size
Price
with collar, elastic wrists and ankles
BR125T*
Coverall M-XL
$54.76
with hood, storm flap, elastic wrists and sock boots
BR122T*
Coverall M-XL
Specifically developed for protection against toxic, corrosive gases, liquids
and solid chemicals. Tested against more than 280 chemicals; More than
260 of these with no observed permeation after eight hours of continuous
contact. Taped seams Tychem® TK garments are available in aprons and
coveralls, shown here in Level A gas-protective suit. If you don’t see the
suit you need, please ask, many more are available.
• Typical Applications: emergency HazMat teams, chemical handling,
petrochemical industry, hazardous materials/waste cleanup.
Please state size when ordering: (M=2), (L=3),(XL=4), (2XL=5)
Please call for pricing on larger sizes.
Level A Fully-Encapsulating suit M-XL TK550T*
Level B Fully-Encapsulating Rear-entry suit M-XL TK526T*
$81.80
Encapsulated Level B, rear entry, faceshield, storm flap,
respirator fit hood, exhaust vent, flat back elastic wrists and
attached boots
BR526T*
100
Coverall M-XL
Fully encapsulated Level A suit, standard three-layer faceshield (PVC 40 mil / Teflon® 5 mil / PVC 20 mil), attached internal Barrier® gloves, attached outer butyl gloves, expanded back, front entry, gas-tight zipper closure, storm flap, attached boots, outer boot flaps, knee pads, two exhaust valves & adjustment belt $814.64
$104.10
WWW.MALLORYFIRE.COM
Faceshield, zip closure, storm flap, resp. fit hood, exhaust vent, flat back elastic wrists & attached boots $273.71
44414
Hazmat
Tychem SL
Coveralls
®
44412
Ideal for light duty or occasional splash
protection.
Tychem® SL is a Saranex
laminated material and
provides a higher level of
protection than Tyvek QC.
Special features include:
bound seam construction and storm flaps over
zippers, with or without
attached hood, boots, and
elastic wrists. Style 44412
has a collar and no hood.
Conveniently packed 12 coveralls per case.
Hazmax® EZ-Fit
Boots
11” steel toe boot with non-slip
EZ-decon outsole
Please state size when ordering: S, M, L, XL, and XXL.
44414(S,XL) Hooded Coverall, S- XL
44414XX
Hooded Coverall, XXL
44414XXX
Hooded Coverall, XXXL
44412(S,XL) Coverall, S- XL
44412XX
Coverall, XXL
44412XXX
Coverall, XXXL
$18.55
$19.67
$21.14
$16.16
$16.97
$17.98
Easy to don and doff when wearing a chemical protective suit. Constructed of chemically resistant and hi-vis compounds. Ideal for hazardous material handling, domestic preparedness, emergency response and
transportation teams faced with chemical, biological or poisonous gas
clean up. Suggested usage: situations involving dangerous chemicals,
gasses or biological hazards and waste. Steel toe, steel shank, steel midsole
for complete protection. Large kick-off lug for easy removal. Excellent slip
resistance. NFPA 1991 and S.E.I certified. Note that the Hazmax® EZ-Fit
boot was designed as an over-the-suite product therefore sizing, while
based on actual shoe size, is reflective of the wearer using a chemical suit
(with inner booties) in conjunction with the boots.
Sizing: Small (6-8), Medium (9-10), Large (11-12), Xlarge (13-15)
87015
11” Hazmax
$90.49
ONEGlove® Hazmat
High Dexterity, Easy to Use, Cut and
Puncture Resistant
Those who risk their lives working in
environments where exposure to hazardous
materials is commonplace deserve the best
protection. The ONEGlove Hazmat provides
maximum protection for Hazmat, Chemical/
biological agents, blood-borne pathogens, fire
service. The unique gas and liquid tight construction provide the user with incredible dexterity. ONEGlove Hazmat
uses PTFE (fluoropolymer), Nomex® and Kevlar® to protect against
puncture and cuts, and exposure to viral, chemical and bio agents, oil, gas
and solvents. Workers get protection from extreme temperatures and flash
fires and the gloves are NFPA compliant: NFPA 1991-2005, NFPA 19942007, NFPA 1992-2005.
◆ NFPA-compliant
◆ Universal suit compatibility
◆ Multi-use glove for industry, military, fire and hazmat
Sold per pair.
22403M Small, Size 7
22404M Medium, Size 8
22405M Large, Size 9
22406M XLarge, Size 10
22407M XXLarge, Size 11
Hazmax® EZ-Fit Knee
Boot
16” knee boot with Ultragrip® Sipe Sole
Surpasses NFPA 1991, 2000 edition for
chemical requirements. Steel toe, steel midsole and Steel ladder shank with
one-piece injection-molded construction, that eliminates seams. Generous kick-off lug for easy don and doffing. Ideal for emergency responders,
Hazmat technicians and specialists, and site remediation workers.
Sizing: Small (6-7), Medium (8-9), Large ( 10-11), Xlarge (12-13), 2XL (14-15)
87012
16” Hazmax
$90.49
$142.78
$142.78
$142.78
$142.78
$142.78
800-MALLORY
101
Hazmat
Safe Escape CBRN
Respirator
BG-4
Designed for Domestic
Preparedness
Provides up to four hours of
clean continuous air, independent of the low
oxygen contaminated ambient
air surrounding the wearer
The Dräger BG-4 supplies the
wearer with safe breathing air for
up to 4 hours in IDLH environments. The BG-4 gives the user
time in extended-duration missions
- time to target, time to get the job
done and time to get back safe.
Commonly referred to as a rebreather, the
closed-circuit breathing apparatus operates
on a proven model of efficiency; by removing carbon dioxide, recycling unused oxygen and supplying fresh oxygen
from a cylinder. Light-weight and comfortable, the BG-4 weighs less than
most 60-minute SCBAs. Its positive pressure design provides the user with
effortless and quiet breathing.
Ideal for almost any application, the BG-4 has a reinforced carbon fiber
shell, allowing it to withstand even the toughest missions. Its low profile
design makes it easy to use inside chemical protective suits or outside
bunker gear.
The Dräger BG-4 is ideally suited for extended duration operations such
as Domestic Preparedness, Haz-Mat response, High-rise search and Tunnel
Rescue.
◆ Ergonomically designed
◆ Lowest breathing resistance
◆ Low maintenance and weight
◆ Comfortable to wear and Simple Operation
◆ NIOSH/MSHA approvals
The BG-4 is available in various configurations with several options and
accessories depending on your application. Please contact us for all the
details and pricing.
4057227 4-hr. Positive Pressure Closed Circuit Breathing Apparatus with Sentinel II. Complete with mask, Carbon Cylinder and Valve and black Pelican case.
$9270.00
Responder PAPR
The MSA Responder PAPR
(Powered Air-Purifying Respirators) system is ideal for First
Responder, Military and Special
Operations personnel who need
non-IDLH respiratory protection for an extended period of time. It combines an industry leading motor-blower with a choice of two proven MSA gas mask CBRN facepieces
and three proprietary cartridges designed for CBRN, particulate, and
poisonous gases/vapors.
The Responder PAPR’s constant filtered airflow provides improved comfort due to the cooling effect, greatly reducing pulmonary stress, preserving strength and mental acuity. The airflow also prevents fogging in the
facepiece, reduces any feelings of claustrophobia and allows for extended
use in hot and stressful environments.
◆ Protects first responders for up to 8 hours under hazardous conditions
◆ Passed MSA developmental tests against live chemical warfare agent as
proposed by the recently published PAPR CBRN standard
A belt-mounted powered air-purifying respirator with choice of 2 proven
tight-fitting facepieces in 3 sizes. The motor-blower provides a constant
102
Homeland security
respiratory protection for emergency
escape.
Clear-hood style
with bonded lens
and CBRN canister for 15-minute escape protection. Sized for individual
fit. Packed securely in easy-open hexagonal storage case for easy group
caching, with prominent end labels for easy size recognition. Optional
straps attach case to belt and leg or over shoulder.
Features
◆ Hood-style respirator with inside-the-hood self-adjusting cradle-type
head straps
◆ NIOSH Approved TC-14G-0276
◆ Easily fitted; can be worn by almost anyone
◆ Accommodates long hair, glasses, facial hair
◆ 3 sizes: S, M, L - easily identifiable by color and letter on storage case
◆ Minimum of training needed –special training kit units shown below
◆ Easy, quick donning
◆ No external straps to catch on things during escape
◆ CBRN (Chemical, Biological, Radiological, Nuclear) high-efficiency
particulate filter and activated carbon canister
◆ Air flows through the canister directly into the nose cup; Inlet checkvalves maximize filter performance; Air exits directly through the
exhalation valve
◆ Canister is permanently bonded to the respirator coupling nut for
secure connection
◆ Nose cup
◆ Helps reduce lens fogging and carbon dioxide buildup
◆ Allows communication superior to devices that use a mouth bit
◆ 3 sizes for individual fit
Hazards
◆ Biological Agents & Chemical Warfare Agents
◆ Tear Gas
Safe Escape Respirator in Hextreme Case, Tactical Version
10066787
10066788
10066789
10073923
Small
Medium
Large
Universal
$255.66
$255.66
$255.66
$255.66
Trainer Version of Safe Escape Respirator Hood Only
10066784
10066785
10066786
10073703
Small
Medium
Large
Universal $159.33
$159.33
$159.33
$159.33
air flow of over 115 lpm to the facepiece. The PAPR can be used with
CBRN cartridges or with multi-purpose chemical cartridges designed to
protect against hazards that might be encountered in tactical law
enforcement operations.
Ordering Information:
You will need to choose C420 PAPR Kit, facepiece, and cartridge for a
complete system. Many configurations are available so please call for a
detailed brochure. You can select from the MSA Ultra Elite or Millennium
Facepieces and include ClearCommand® Communications features in
your custom system.
Call for more information.
WWW.MALLORYFIRE.COM
Hazmat
NEW from Morphix Technolgies
The Chameleon®, a field-configurable chemical detection unit, is the
most innovative hazardous chemical detection device on the market today. It provides a low-cost, easy-to-use, hands-free solution for first responders, military and
industrial personnel. Each disposable cassette detects a different toxic gas, enabling
the user to configure the reusable Chameleon armband for the needs of his or her
specific mission on a daily basis.
The Chameleon is a patented one of a kind Chemical Detection solution to assist
in the identifying the presence of Chemicals before damaging effects have taken
place.
The Chameleon, unlike current colorimetric detection, is designed for use in a
wide variety of operating environments; it can be used in desert heat, arctic cold,
or tropical conditions; it can even be immersed in water! It detects gases and vapors
in air where many other technologies only detect hazards in liquid or aerosol form.
For toxic chemicals, the gas form is the most likely danger to first responders
and military personnel.
The sensors change color when the toxic gas is present and require no power or
calibration. The Chameleon is wearable and designed for easy on / easy off fit
on the wearer’s forearm. It can be worn over most turnout gear or level-A suits.
◆ No batteries
◆ No calibration
◆ No moving parts
◆ No air pumps
◆ No filtration
◆ Low cost sensor
replacement
Chameleon sensors are available for the following hazards:
◆ Acid (low pH) gases
◆ Ammonia
◆ Basic (high pH) gases
◆ Chlorine/Fluorine
◆ Hydrogen Sulfide
◆ Iodine
Chameleon Kits
085100
HazMat Starter Kit contains: (1) One armband, 10 cassette holder-standard length 14”:, one (1) Belt Pouch, ten (10) cassettes each: Low pH (acid), High pH (base), Chlorine/Fluorine, Hydrogen Sulfide, Phosgene $195.00
085100XL
HazMat Starter Kit contains: (1) One armband, 10 cassette holder-standard extra length 18”:, one (1) Belt Pouch, ten (10) cassettes each: Low pH (acid), High pH (base), Chlorine/Fluorine, Hydrogen Sulfide, Phosgene 085101
HazMat Combination Cassette Kit contains: Ten (10) cassettes each; Low pH ((acid), High pH (base), Chlorine/Fluorine, Hydrogen Sulfide, Phosgene 085120
Clan-Meth Lab Detection Kit contains; (1) One armband, 10 cassette holder-standard length 14”:, one (1) Belt Pouch, ten (10) cassettes each: Low pH (acid), Ammonia, Iodine, Hydrogen Sulfide, Phosphine 085120XL
Clan-Meth Lab Detection Kit contains; (1) One armband, 10 cassette holder-extra length 18”:, one (1) Belt Pouch, ten (10) cassettes each: Low pH (acid), Ammonia, Iodine, Hydrogen Sulfide, Phosphine 085121
Clan-Meth Lab Detection Kit contains; Ten (10) cassettes each: Low pH (acid), Ammonia, Iodine, Hydrogen Sulfide, Phosphine
$195.00
$150.00
$195.00
$195.00
$150.00
New Chameleon Hard Carry Case Rapid Detection Kit
085150
Rapid Detection Kit contains: (2) Two armbands, one (1) additional cassette holder, 20 cassettes each: Low pH (acid), High pH (base), Chlorine/Fluorine, Hydrogen Sulfide, Phosgene, (20) training cassettes with ampoules, training video, hard carrying case $498.00
Armbands
08500
085000XL
Choose from 14” or 18” length
Chameleon Armband (10 cassette holder)-Pack of 5 standard length 14”
Chameleon Armband (10 cassette holder)-Pack of 5 extra length 18”
$150.00
$150.00
Cassettes (50 per box) individually sealed 084005-50
Low pH (acid) Cassettes
084060-50
Phosgene Cassettes
084030-50
Hydrogen Sulfide
084035-50
084020-50
084065-50
Chlorine/Fluorine Cassettes
High pH (base)
Sulfur Dioxide Cassettes
084015-50
084061-50
084052-50
$150.00
Ammonia Cassettes
Phosphine Cassettes
Iodine
Cassettes (10 per box) individually sealed
084005-10
Low pH (acid) Cassettes
084060-10
Phosgene Cassettes
084030-10
Hydrogen Sulfide
084035-10
084020-10
084065-10
Chlorine/Fluorine Cassettes
High pH (base)
Sulfur Dioxide Cassettes
084015-10
084061-10
084052-10
$42.00
Ammonia Cassettes
Phosphine Cassettes
Iodine
800-MALLORY
103
Hazmat
Solaris® Fire Multigas
Detector
Choose a world-class instrument that is durable
and provides the best value in its class. Detects
the presence of O2, H2S, CO and Combustible gas with state-of-the-art engineering
and quality. Whether you need just the instrument or a complete deluxe kit you can
have it any way you want. An AssembleTo-Order System is available to configure
the instrument just how you need it. You can select
from sensors, power supply, datalogging, calibration accessories and
more. We are listing some basic standard choices below.
All kits include: configured, non-datalogging, UL/cUL approved Solaris
Fire instrument with charger, calibration cap assembly, instruction card
and manual, durable stowable red carrying case and orange instrument
case - at no additional cost.
10055775
10055773
10071203
10071201
10050976 Deluxe Kit (includes 4-gas instrument sampling pump and econ-cal calibration kit) $1,554.00
Standard Kit (includes 4-gas instrument and sampling pump)
$1,254.00
Standard Kit (includes 4-gas instrument and econo-cal calibration kit) $1,225.00
Basic Kit – instrument only $925.00
Belt Clip Retractable Lanyard $59.00
Orion G Multigas
Detector
MSA’s own proprietary PID sensor design provides
users with excellent PID performance including
humidity resistance, stable zero readings and fast
response and clear times.
Provides users outstanding multifunctional capabilities by integrating a high-performance PID
(photo ionization detector) sensor into a four-gas
detector. Users are able to simultaneously monitor
for volatile organic compounds (VOCs) with low
vapor pressures while measuring for combustible,
toxic and oxygen-deficient atmospheres within one reliable, easy-to-use,
durable unit.
◆ User Friendly Software
◆ Loud Alarm
Applications
◆ Chemical & Clan Labs
◆ Domestic Preparedness
◆ Fire Fighting
◆ Gas Detection
◆ Hazardous Materials
◆ Oil and Gas
Each unit is Assembled –To- Order to meet your exact needs. For a complete list of options and accessories, please ask. We can configure the exact
unit for your needs. You make the choice!
Call for pricing, configurations and accessories.
Sirius Multigas Detector Kits (small sample of what’s available)
The Orion G Multigas and
Leak Detector is a four-gas,
multi-function portable detector
featuring one-button calibration, rugged construction with
excellent resistance to dust and
water penetration and advanced
ergonomic design.
The Orion G Multigas and Leak
Detector detects combustible
gas leaks and O2, H2S and CO.
A flexible probe sensor makes it ideal for gas-leak detection at gas meters,
bar holes, furnaces, pipes, storage tanks and survey sites. Other applications include confined space monitoring and carbon monoxide detection
at flues and furnaces.
Simple, intuitive two-button operation allows for easy use with gloved
hands, and a large display with great contrast makes it easy to read, even
in low-light conditions. With its highly durable construction, the Orion
G Multigas and Leak Detector stands up to tough environments.
Other key features of the Orion G Multigas Leak Detector include:
◆ Multi-functional flexibility: indoor, outdoor and underground—
perfect for appliances, flues and underground pipes
◆ Bar-hole probe filter designed to keep out water and dirt
◆ Intrinsically safe leak sensor
◆ Ergonomic design that fits snugly in hand
◆ Long-life NiMH or alkaline batteries (interchangeable)
◆ Fast response time
◆ Leak sensor available on flexible, gooseneck probe
◆ Internal pump, for convenient remote sampling
◆ Sensors that are easy to change
Call for pricing and availability
104
Sirius PID Multigas
Detector-Fire Version
10051155
10051156
10051157
Deluxe FS LEL 4-gas Lithium Ion PID Deluxe FS LEL 3-gas H2S Lithium Ion PID
Deluxe FS LEL 3-gas CO Lithium Ion PID
$4,293.50
$4,103.50
$4,103.50
Orion® Multigas Detector
A low-cost, reliable, and easy-to-use portable instrument for detecting the
presence of O2, H2S, CO, and combustible gas. It will stand up to the
roughest handling in even the toughest environments.
Economy units come standard with sensors, battery of
choice, calibration cap and protective boot.
Industrial units include economy features
as well as internal pump, 10’ sample line, 1’
probe and orange cordura case. Deluxe units
come with the industrial features plus calibration kit and black economy case.
Features: Assemble-to-Order Matrix for Orion®
Multigas Dectector
◆ One-button calibration
◆ Long-life battery
◆ Carbon-filled nylon case
◆ Tough, durable construction
◆ Built-in pump
◆ TIM® System compatibility
◆ Large, easy-to-read display
◆ Durable sensors
◆ Link™ Software compatibility
10025930
10025932
10030399
10030420
WWW.MALLORYFIRE.COM
Orion, Economy 4-Gas Alkaline
Orion, Deluxe 4-Gas NiMH Orion, Deluxe 4-Gas Datalog NiMH
Orion, Industrial 4-Gas NiMH $1,425.00
$2,433.00
$2,783.00
$1,848.00
Galaxy Automated
Test System
For use with Solaris®, Sirius®
and Orion® Instruments
The Galaxy Automated Test System
works without the touch of a single button. Simply place the instrument in the
test stand and the system performs the
test automatically; no user intervention
is required. The Galaxy System is completely standalone; it does not require
a computer or network interface for any
mode of operation.
For the fully featured version of Galaxy Automated Test System, an optional network interface is available for either wired (Ethernet) or wireless
(802.11b) networks. The Galaxy interface for data retrieval and reporting
is extremely easy to use. Any web navigator can be used to access the data
of a network-enabled Galaxy Automated Test System. Calibration and
bump check records, due date for instrument calibration, and the ability
to email MSA directly for support are just a few of the capabilities of this
interface.
Detects both chemical warfare agents and selected toxic industrial chemicals (TICs). Both units are ruggedly constructed, compact and lightweight. They are also extremely easy to use, requiring no prior training.
A single key press begins automatic sampling and analysis. Audible and
visual alarm messages provide clear and simple alarm condition display.
Offers self-diagnostic check during rapid warm-up,
alphanumeric display with LED alarms and 8-12 hour
operation with rechargeable lithium ion batteries.
Vapor diffusion check source verifies system performance. The inlet design protects against dust and
particulates. Kits include a battery charger, belt clip,
two Sony long-life lithium ion rechargeable batteries,
a waterproof carrying case, vapor check source and
operating manual.
Used to detect these hazards:
◆ Combustible atmosphere
◆ Confined space
◆ Oxygen deficiency
◆ Toxic atmosphere IDLH
◆ Toxic atmosphere Non-IDLH
Hazmat
HAZMATCAD Plus
Chemical Agent Detector
Call for Pricing and Availability
Very Low Total Cost of Ownership
The Galaxy Automated Test System will help lower the overall total cost of
ownership of your MSA gas detection instruments. With the automated
record-keeping capabilities that are available with each Galaxy Test Stand,
there’s no need to keep
hand-written records of an
instrument’s calibration
history.
Ideal for:
◆ Domestic preparedness
◆ Fire fighting
◆ Gas detection
◆ Hazardous materials
X-am 5000 Multigas Detector
Hazards:
◆ Combustible atmosphere
◆ Confined space
◆ Leak detection
◆ Oxygen deficiency
◆ Toxic atmosphere IDLH
◆ Toxic atmosphere Non-IDLH
Versatile
Multiple System Interconnectivity
Item
Solaris Kit
Sirius Kit
Orion Kit
10061050
10061824
Basic Standalone Kit
Basic System
10061051
Standard Standalone Kit (includes Regulator)
Standard System
10061051
10061050
10061824
Please call for pricing and list of all the other model numbers and options available.
The smallest gas detection instrument for up to 5 gases.
The Dräger X-am 5000 belongs to a new generation of
gas detectors, developed especially for personal monitoring applications.
This 1 to 5-gas detector reliably measures combustible
gases and vapors as well as oxygen and harmful concentrations of CO, H2S, CO2, Cl2, HCN, NH3, NO2,
PH3 and SO2.
A variety of special calibrations for the catalytic Ex sensor allow even more sensitivity when detecting specific
combustible gases and vapors. Equipped with durable
XXS sensor technology, the Dräger X-am 5000 offers
maximum security and extremely low operational costs.
◆ Ergonomic mobile phone design-lightweight and easy to carry
◆ Durable electrochemical sensor technology
◆ Flexible and adaptable sensor exchange
◆ Watertight and durable
Power supply unit, battery and sensors sold separately. Many configurations are available, please ask for more information.
4543748
4543749
6810882
6810881
6810883
4543755
X-am 5000 Basic instrument Alkaline power supply with AA batteries
Sensor XXS CO
Sensor XXS O2
Sensor XXS H2S
Carrying case
800-MALLORY
$995.00
$895.00
$140.00
$140.00
$140.00
$26.50
105
Hazmat
Altair 5 Multigas Detector
GasBadge® Plus Personal
Single-Gas Monitor
Many great features plus the outstanding
durability and performance you expect from MSA.
◆ 2-year continuous monitoring
◆ Low-cost O2, CO, H2S, SO2 or NO2
monitoring
◆ PPM or % by volume readout
◆ Powerful audible alarm complemented by
vibrating and visual alarms, standard
◆ User adjustable alarm and calibration gas
setpoints
◆ Water resistant
◆ 2-year warranty
GasBadge® Plus is a two-year, maintenance-free, single gas monitor ideal
for personal protection from unsafe levels of oxygen, carbon monoxide,
hydrogen sulfide, sulfur dioxide or nitrogen dioxide. The unit’s compact
size and light weight - 2.5 oz – (72 grams) allow it to be worn comfortably
with a variety of clip attachments, and the top-mounted sensor provides
continuous and unobstructed protection even when placed in a shirt
pocket. The rugged enclosure is extremely durable, and resistant to water
and radio frequency interference. A protective concussion-proof overmold
protects the unit from extreme abuse in a variety of harsh industrial
environments.
5-gas capability, more than 17 preprogrammed languages, high-resolution, crisp color display option,
and MSA’s exclusive MotionAlert and InstantAlert
features.
Ideal for confined space applications, the MotionAlert feature, when enabled, activates a “man down”
alarm if no motion is detected for 30 seconds. The
InstantAlert feature allows users to manually activate
an audible alarm to alert those around them to
potentially dangerous situations.
◆ MSA Link Software with multi-language capability
◆ Galaxy Test System-compatible
◆ Triple alarms at 95 dB+
◆ Durable rubber/synthetic over-molding
◆ Intuitive 3-button operation
◆ Real-time on-line monitoring capability with MSA Link Software
◆ 2-year comprehensive warranty for standard models
Options
◆ High-resolution color or monochrome display screen
◆ Many e-chem sensor options
◆ Integral pump or diffusion option
◆ Rechargeable lithium-ion or alkaline battery options
ALTAIR 5 Multigas Detector with data logging, integral pump, rechargeable battery
pack, charger, calibration cap, tubing, CD manual
Industrial Kits - includes monochrome display, integral pump,
10 ft sampling line, 1 ft probe
Deluxe Kits - includes color display, sampling pump, 10 ft sampling line, 1 ft probe
Economy Kits - includes monochrome display, integral pump
Call for pricing and availability
Lumidor Impact
Multi Gas Monitors
Checks up to four gases simultaneously
The Impact is the most basic model of the
Impact series. It contains the same sophisticated electronics and advanced SureCell™
sensor technology as the more advanced models but without the features
you may not need. Accepts only disposable sensor cartridges.
Impact Pro & Impact Pro IR
The Impact Plus and Impact Plus IR feature a number of technological
enhancements to improve the unit’s versatility and functionality. Both
models are equipped with vibrating alarms to warn users of gas dangers in
noisy environments. Also, both feature built-in pumps to aid in the use of
sampling tubes. Plus models also work with a wide range of exotic gases
and can function with either disposable or serviceable sensor cartridges.
Each is supplied with quick start guide, multi-lingual operating instructions on CD, dry cell battery holders and batteries, belt clip, and flow
adaptor. Units are fully configured and ready to accept either disposable or
serviceable sensor cartridges (depending upon model).
Impact and Impact Pro multi-gas monitors are available for use with a
wide range of accessories including the unique Enforcer calibration system
and the Safelink communication system.
23LB20008UEHoneywell Impact Multigas Monitor (Sensor Cartridge Purchased Separately) 2302B20009UE Honeywell Impact Pro Multigas Monitor (Sensor Cartridge Purchased Separately) 2302B20009UER Honeywell Impact Pro IR (for use with IR cartridges) 106
$540.00
$755.00
$755.00
18100050-1
GasBadge Plus – Carbon Monoxide (CO) $195.00
18100050-2
GasBadge Plus – Hydrogen Sulfide (H2S) $195.00
18100050-3
GasBadge Plus – Oxygen (O2)
$195.00
$325.00
18100050-4
GasBadge Plus – Nitrogen Dioxide (NO2)
18100050-5
GasBadge Plus – Sulfur Dioxide (SO2)
$325.00
18106401
GasBadge Plus Nylon Carrying Case $10.00
18106419
GasBadge Plus 2-unit Nylon Carrying Case $15.00
18106500
GasBadge Constant-Flow Hand Pump
$149.00
17121963
GasBadge Neck Lanyard w/Safety Release
$5.00
17124504
Replacement water/dust sensor barriers (5 ct.)$10.00
18106260
GasBadge Datalink
$150.00
18106344-00
Cal Plus Calibration Station
$795.00
18106344-10
Cal Plus Calibration Station w/on-board printer
$1,095.00
17117714
Serial data thermal printer with infrared interface
$395.00
17117722
Serial data dot matrix printer, 120 VAC powered
$395.00
Biosensor™ 2200R
Biological Agent
Detector
Easy to use, handheld portable.
A handheld, portable, on-site instrument for rapid detection, analysis,
and identification of biological
agents. Unique bioassay technology offers excellent sensitivity and low
false positives while offering ease of use during white powder response
calls. This highly accurate detection method provides rapid measurement
of biohazards such as anthrax, ricin, botulism, SEB, and plague.
Exclusive five minute time-to-answer allows first responders to make
informed critical decisions more rapidly than any other biological agent
detector. The BIOSENSOR 2200R employs dynamic surface generation,
a patent pending type of immunoassay detection technology. This technology offers significant advantages over other field-based assay methods by
combining the benefits of both the free solution and lateral flow types.
The result is more rapid analysis, a user-friendly format, and detector
stability within a wide range of climates.
Call for pricing and more information
WWW.MALLORYFIRE.COM
Hazmat
GasBadge® Pro
Dockable Single-Gas
Monitor
◆ Interchangeable “smart” sensors monitor oxygen or any one of many toxic
gases
◆ One year datalogging capacity (minimum)
◆ Standard STEL and TWA
◆ Docking Station™ Compatible
◆ Minimum 2,600 hours continuous operation from replaceable CR2 Lithium
battery
◆ PPM or % by volume readout
◆ Water resistant
◆ Lifetime warranty
Built to Industrial Scientific’s highest quality and reliability standards,
GasBadge® Pro provides a lifetime of gas hazard protection with more features than any other single-gas monitor available. Interchangeable “smart”
sensors enable the GasBadge® Pro to be quickly adapted to monitor unsafe
levels of oxygen or any one of the following toxic gases: carbon monoxide, hydrogen sulfide, nitrogen dioxide, sulfur dioxide, chlorine, chlorine
dioxide, phosphine, hydrogen cyandide and ammonia.
M40 Multi-Gas Monitor
◆ 1 to 4 gas monitoring for O2, LEL, CO, H2S
◆ Standard vibrating, 90 dB audible and ultrabright visual alarms
◆ 18-hour runtime with integral Li-ion battery pack
◆ Low, High, STEL, and TWA user- adjustable alarms
◆ Standard 75-hour datalogging capability
◆ Two-year all-inclusive warranty
GasBadge® Pro communicates directly via an infrared interface to optional
accessories like the Docking Station™, Datalink, and infrared printer to
further simplify and automate calibration, function (bump) testing and
data downloading. Standard STEL and TWA readings, and datalogging
up to one year of survey data are featured along with an event-logger that
records the last 15 alarm events.
Built with the durability and simplicity found in every Industrial Scientific instrument, the M40 is a reliable, low-cost gas monitoring solution
for confined space or personal monitoring applications. The M40’s rugged composite case is immune to RFI, and houses four discrete sensors,
a large LCD readout, and integral lithium-ion battery for up to 18 hours
continuous runtime.
Housed in a rugged enclosure, the monitor is immune to RF, water
resistant and extremely durable. A protective concussion-proof overmold
protects the unit from extreme abuse in a wide variety of harsh industrial
environments. Its simple and intuitive four-button navigation allows easy
access to setup, operation and calibration functions. Lifetime warranty.
The M40 continuously monitors oxygen, combustible gases, carbon
monoxide, and hydrogen sulfide in any combination, activating bright
alarm light, 90-dB audible, and internal vibrating alarms when gas concentrations exceed the preset limits. Additional standard features include
Peak/Hold functions, STEL and TWA readings, a continuous loop
datalogger and ‘Quick-Cal’ calibration.
18100060-1
GasBadge Pro – Carbon Monoxide (CO) $375.00
18100060-2
GasBadge Pro – Hydrogen Sulfide (H2S) $375.00
$375.00
18100060-3
GasBadge Pro – Oxygen (O2)
18100060-4
GasBadge Pro – Nitrogen Dioxide (NO2) $525.00
18100060-5
GasBadge Pro – Sulfur Dioxide (SO2) $525.00
18100060-6
GasBadge Pro – Ammonia (NH3) $595.00
18100060-7
GasBadge Pro – Chlorine (Cl2)
$525.00
18100060-8
GasBadge Pro – Chlorine Dioxide (ClO2) $595.00
$645.00
18100060-9
GasBadge Pro – Phosphine (PH3) 18100060-B
GasBadge Pro – Hydrogen Cyanide (HCN)
$595.00
18106484
GasBadge Pro Nylon Carrying Case
$10.00
18106492
GasBadge Pro 2-unit Nylon Carrying Case $15.00
18106302-AB+
GasBadge Pro DS2 Docking Station™ $1,795.00
18106500
GasBadge Constant-Flow Hand Aspirated Pump $149.00
17121963
GasBadge Neck Lanyard w/Safety Release $5.00
17124504
Replacement water/dust sensor barriers (5 count) $10.00
18106260
GasBadge Datalink
$150.00
17117714
Serial data thermal printer with infrared interface
$395.00
+ Ordering information –
A = Wireless Compact Flash (0-none, 1-installed +$125.00)
B = number of iGas Readers at $45.00 each
The M40 comes standard with a charger, nylon carrying case, cell-phone
belt clip and calibration cup with tubing. Available accessories include
SP40 motorized remote sampling pump, 12 VDC automobile charger,
M40 datalink and M-Cal Calibration Station.
18105437-01111 18105437-01101 18105437-01110
18105437-11111 18105437-11100 M40-KIT-11111 M40-KIT-11101
18105460
18105510
18105502
18105528
18105965-100
18105965-010
800-MALLORY
M40 Monitor – LEL, O2, CO, H2S
$595.00
M40 Monitor – LEL, O2, CO $545.00
M40 Monitor – LEL, O2, H2S $545.00
M40/SP40 – LEL, O2, CO, H2S
$745.00
M40/SP40 – LEL, O2, CO
$645.00
M40 Confined Space Kit w/pump LEL, O2, CO, H2S $1,150.00
M40 Confined Space Kit w/pump LEL, O2, CO
$950.00
SP40 Motorized Sampling Pump
$150.00
6-unit Charger
$375.00
12 VDC Automobile Charger $49.00
M40 Datalink
$150.00
Single-Unit M-Cal, M40 Bay $795.00
Single-Unit M-Cal, M40/SP40 Bay $795.00
107
Hazmat
MX6 iBrid™
Multi-Gas Monitor
iTX Multigas Monitor
◆ Monitors from one to six gases
◆ Simplified “Quick-Cal” feature
◆ 24-hour runtime with lithium-ion batteries
◆ Datalogging capability standard
◆ Lifetime warranty
The iTX is the industry’s most versatile portable gas detection instrument.
Designed to grow with you as your monitoring needs change, the iTX can
go from being a single-gas unit to a six-gas monitor, or anything in between. Featuring “smart” sensor technology, the iTX provides simplified,
single-button operation and calibration functions. A Quick-Cal feature
quickly calibrates up to four sensors at once, saving time and calibration
gas costs.
The iTX features a backlit dot matrix LCD that simultaneously displays
all gases monitored, ultra-bright visual alarms, and a powerful 90 dB
audible alarm, all encased in a compact, rugged stainless steel housing to
provide maximum durability and RFI protection.
18104307-11014
iTX, LEL, O2, H2S, CO, Li-ion $1,785.00
18104307-11100
iTX, LEL, O2, CO, Li-ion
$1,535.00
18104307-11400
iTX, LEL, O2, H2S, Li-ion
$1,535.00
18104307-11126
iTX, LEL, O2, CO, NO, NO, Li-ion2 $2,210.00
18104307-1147A
iTX, LEL, O2, H2S, Cl2, ClO2, Li-ion $2,210.00
18104307-1145A
iTX, LEL, O2, H2S, SO2, ClO2, Li-ion$2,210.00
18104307-11457
iTX, LEL, O2, H2S, SO2, Cl2, Li-ion $2,135.00
18104307-11347
iTX, LEL, O2, NH3, H2S, SO2,
Cl2, Li-ion
$2,210.00
18105551-AB+
DS2 Instrument Docking Station for iTX
$1,795.00
18104646
iSP Motorized Sampling Pump
$398.00
18105189
iTX Constant-Flow Hand Pump
$149.00
18104729
iButton Programming Kit, 120 VAC $295.00
17096348
iButton Data Memory Cell w/Mounting Card $24.95
17090333
iButton Data Memory Cell
$7.95
18104737-120
iTX Charger w/Datalogging Kit, 120 VAC
$445.00
18104711-120
iTX Charger/Datalink, 120 VAC
$375.00
18104315
iTX Single-Unit Compact Charger, 120 VAC
$79.00
18105296
iTX Single-Unit Compact Charger, 12 VDC
$79.00
18105379
6-Unit Charger w/Flying Leads and Cradle for iTX
$350.00
18104703
iTX Leather Carrying Case $75.00
+ Ordering information –
A = Wireless Compact Flash (0-none, 1-installed +$125.00)
B = number of iGas Readers at $45.00 each
108
The World’s First Gas Monitor with a
Color Display
◆ 1 to 6 gas monitor
◆ Full-color LCD display
◆ Up to 40 hours with extended runtime battery
◆ Simple, menu-driven navigation
◆ 25 available sensors
◆ Diffusion or internal pump operation
◆ DS2/iNet™ compatible
The MX6 iBrid™ is the new full featured multi-gas monitor from Industrial Scientific. The user-friendly design of the MX6 features a full-color
liquid crystal display and 5-way navigation button to scroll through the
menu-based operating system. Designed to meet a variety of monitoring applications, the iBrid™ can be set up to detect from 1 to 6 gases,
including options for PID and infrared sensors for combustible gases and
Carbon Dioxide. Configured with an internal sampling pump or for
diffusion operation, the MX6 is ideal for applications from confined space
entry to personal survey monitoring.
Confined space kit includes: monitor, motorized sampling pump/tubing, universal
charger, carrying case, belt clip, calibration gas/regulator/cup/tubing, wrist strap,
maintenance tool, manual, quick start guide, Training CD.
MX6-K1230101
LEL, CO, H2S, O2, Li-Ion, Diffusion $1,760.00
MX6-K0230101
LEL, H2S, O2, Li-Ion, Diffusion $1,510.00
MX6-K1030101
LEL, CO, O2, Li-Ion, Diffusion
$1,510.00
$1,260.00
MX6-K0030101
LEL, O2, Li-Ion, Diffusion
MX6-K1230301
LEL, CO, H2S, O2, Alk, Diffusion $1,690.00
MX6-K0230301
LEL, H2S, O2, Alk, Diffusion
$1,440.00
MX6-K1030301
LEL, CO, O2, Alk, Diffusion
$1,440.00
MX6-K0030301
LEL, O2, Alk, Diffusion
$1,190.00
MX6-K1230211
LEL, CO, H2S, O2, Li-Ion/ER, w/Pump$2,035.00
MX6-K123R211
LEL, CO, H2S, O2, PID, Li-Ion/ER, w/Pump
$2,460.00
MX6-K103Q211
LEL, CO, O2, CO2, Li-Ion/ER, w/Pump$2,180.00
Confined Space Kits
MX6KIT-K1230211
MX6KIT-K123R211
4-gas w/Pump
4-gas/PID w/Pump
Accessories
$2,760.00
$3,335.00
18107094
Battery Charger/Datalink
$295.00
18107011
Battery Charger, 12V $79.00
18106765
SP6 Motorized Sampling Pump Module $250.00
18106724-ABC*
DS2 Instrument Docking Station $1,795.00
*Order with appropriate suffix.
A. Wireless Compact Flash (-0 None, -1 Installed +125.00 $USD)
B. iGas Reader (-0 None, -1 +45.00 $USD, -2 +90.00 $USD, -3 +135.00 $USD)
C. Power Cord (-0 (N.American Plug), -1 (UK Plug), -2 (European Plug), -3
(Australian Plug))
Supplied with monitor: universal charger, nylon carrying case, belt clip, calibration
cup/tubing, wrist strap, maintenance tool, manual, quick start guide, Training CD,
dust filter water stop (aspirated unit only).
WWW.MALLORYFIRE.COM
Easy to use, 3-button operation makes
the 950 series practical and dependable on the job. The ergonomically
designed, high-impact case will take the
wear of heavy use. The water resistant unit offers pump or diffusion air
sampling methods. Sensor Options:
oxygen, combustible, carbon monoxide, hydrogen sulfide, ammonia, chlorine, hydrogen cyanide, hydrogen, sulpher dioxide, nitrogen dioxide,
nitric oxide, chlorine dioxide, phosphine, solid state-MOS for toxics.
◆ 5 Interchangeable Plug & Play Sensors
◆ Exchange sensors without calibration
◆ 103 - dB Alarm
◆ Large LCD display for easy reading
◆ Rechargeable or Alkaline battery operation
◆ Data-logging option
◆ Easy to change configuration
◆ Lifetime electronic warranty option
◆ 28+ hour run time
◆ Special Cal Gas Kit pricing when ordered with monitor
Standard equipment include: 16-ft tubing, Cal Hood, Software for Expanded Internal Settings, Manual.
Item numbers listed are sold calibrated to Methane.
950-A100-MABCZ
950 A100 base with Alkaline battery and EX/OX/CO/HS sensors $1,667.60
950-A101-MABCZ
950 A100 base with Alkaline batter, pump
and EX/OX/CO/HS sensors $1,889.92
950-A111-MABCZ
950 A111 base with Alkaline battery, pump
data logging and EX/OX/CO/HS $1,971.20
950-R111-MABCQ
950 R111 with NiMH battery, pump data
logging and EX/OX/CO/HS/PID, 10.6 eV sensors (EX calibrated to Methane and PID to Isobutylene)
$3,519.12
110 Series XL & XLS
The Shield XL gives you more options to detect
more gases with the power of “continuous gas
reading.” You can measure at a lower parts-permillion resolution for situations that call for finer
gas readings. The XL also delivers security in the
choice of two methods of gas monitoring: Short
Term Exposure Limit (STEL) and Time Weighted
Average (TWA) exposure. Switch from one to the
other to adapt to different work situations.
The Shield XL features a replaceable battery and
sensor to help reduce total cost of ownership. Ten
year warranty on electronics and 2 year warranty on the battery, CO and
H2S sensor.
Hazmat
950 Series Multi-Gas
Detectors
740 Series
Portable
Multi-Gas
Detector
Speed, reliability, flexibility
and affordability are what
you’ll get.
◆ Precalibrated Sensor Pack
switch and go in seconds,
no more delays
◆ Sensor Tester, push-of-the
button ease
◆ Li-Ion battery delivers up to hours of run time. (optional - 3 AAA
Alkaline)
◆ Massive data logging capacity stores more than five months’ records
◆ Banshee Alarm is the loudest in the industry
◆ Rated Class 1, Division 1
Standard features include: rechargeable Li-ion battery. charger adapter,
internal vibrator, data logging, rugged alligator clip, infrared port, gas test
hood, and instruction manual.
Available with a variety of options: sensors for oxygen, carbon monoxide,
hydrogen sulfide and combustibles.
Item numbers listed are sold calibrated to Methane.
740-100-400
740 4-gas monitor with H2S, OX, CO, EX;
alligator clip, rechargeable Li-ion battery, Universal
power supply (100-240 VAC) Cal gas hood and tubing, quick start manual, CD manual
$699.00
740-100-300
740 3-gas monitor with OX, CO, EX; alligator clip, rechargeable Li-ion battery, Universal power supply (100-240 VAC) Cal gas hood and tubing, quick start manual, CD manual
$679.00
740-100-350
740 3-gas monitor with H2S, OX, EX; alligator clip, rechargeable Li-ion battery, Universal
power supply (100-240 VAC) Cal gas hood and tubing, quick start manual, CD manual $679.00
740-100-200
740 2-gas monitor with OX, EX; alligator clip, rechargeable Li-ion battery, Universal power supply (100-240 VAC) Cal gas hood and tubing, quick start manual, CD manual
$655.00
110 Series XLS
Take all the advances packed into the Shield XL
and add another big one: four different programmable alarm settings. The Shield XLS gives you
the flexibility to adjust the alarm to suit your specific needs in a variety of working environments.
Its combination of the STEL alarm, TWA alarm
and adjustable alarm settings you can change in
the field.
110-495-101XL
110-495-102XL
110-495-102XLS
110 Series XL Carbon Monoxide 110 Series XL Hydrogen Sulfide 110 Series XLS Hydrogen Sulfide 800-MALLORY
$217.39
$217.39
$239.00
109
Hazmat
Toxi Vision Single
Sensor Gas Detector
The Toxi Vision is a durable, 3.5” x
2.5“ single-sensor gas detector that
offers consistent long-term protection and low cost of ownership.
450 Series
Single Gas Portable Pocket Monitor
It’s compact size; reliability, competitive price and flexibility with nine
detector options make the 450 a smart choice.
◆ Built Tough - Rubber boot absorbs everyday impact and protects internal components from dust and water.
◆ Superior Warranty - Completely refined inside and out, the 450 Series
carries a standard two-year warranty on electronics and sensors CO,
H2S, OX, 1 year of toxic sensors
◆ Simple, Informative Display - High contrast numerical level display
and high intensity LED alarm warning indication and buzzer effectively
alert impending gas dangers.
◆ Banshee Alarm System - The loudest in the industry at a screaming 85
dB for almost any work environment, plus a brilliant red warning light.
Specifications
◆ Display -High contrast numerical level display and high intensity LED
alarm warning indication and alert buzzer
◆ Sensor Life -Up to 60 months, dependent upon sensor type
◆ RF Frequency Protection -Readings will not change by more than 5%
of full scale when placed no less than 2’ from a 5-Watt radio transmitting on a frequency of 30, 150, or 450 MHz
◆ Battery -18-24 months, non-alarming, lithium camera battery, included
◆ Special Features - Power “On/Off ” switch plus convenient dual zero
and span adjustment for calibration at alarm point for toxic gases or
20.9% for oxygen, optional vibrator
◆ Intrinsic Safety - Class 1, Div 1, Groups A, B, C, D, CSA approved
◆ Size -3.65” L x 1.7” W x 1.1” H, Weighs -5.5 ounces
◆ Each monitor includes calibration adapter, tubing, manual and case.
450-450-100
450-450-101
450-450-103
450-450-104-A
450-450-106
450-455-100
450-455-101
450-455-103
450-455-104A 450-455-106
450 Series Oxygen Detector $329.28
450 Series Carbon Monoxide Detector $407.19
450 Series Chlorine Detector $517.83
450 Series Ammonia Detector $586.53
450 Series Hydrogen Cyanide Detector $627.00
455 Oxygen Detector w/Vibrator $380.73
455 Carbon Monoxide Detector w/Vibrator $458.64
455 Chlorine Detector w/Vibrator $617.40
455 Ammonia Detector w/Vibrator $633.57
455 Hydrogen Cyanide Detector w/Vibrator$617.40
Features a rugged metal-plated case
that is immune to both RFI and the
elements. One-button operation keeps
it simple. A few minutes of training
is all it takes to ensure proper operation. The large liquid crystal display
can be easily seen from several feet away. A manually-activated backlight
ensures the visibility of the readings even in low light conditions. An
audible alarm and bright LED alarm light warn users of dangerous conditions, while an optional vibrating alarm is available for use in high-noise
environments.
54-37-90
54-37-01
54-37-02
54-37-21 54-37-18 54-37-20 54-37-13 54-37-0N
Oxygen (O2)
Carbon Monoxide (CO)
H2S Hydrogen Sulfide NH3 Ammonia Cl2 Chlorine
ClO2 Chlorine Dioxide
PH3 Phosphine Vibrating Alarm
$345.00
$345.00
$395.00
$445.00
$445.00
$445.00
$445.00
$50.00
MultiPro IQ Express Docking Station
The MultiPro IQ Express Docking Station is an automatic calibration
station and data download center for the MultiPro gas detector. Just drop
the detector into the dock and the MultiPro IQ Express does the rest.
The MultiPro IQ Express is a fully automated bump test station that
performs up to eight critical tests every time an instrument is placed in the
dock. If an instrument fails the bump test, the MultiPro IQ Express will
automatically initiate a full span calibration without further intervention
from the user.
Automated tests:
◆ Automatic instrument identification
◆ Automatic battery test
◆ Automatic alarm tests
◆ Automatic bump test
◆ Automatic calibration (if necessary)
◆ Automatic record keeping
◆ Automatic ready/fault indication
Configuration options:
◆ Docks can operate as independent
calibration stations
◆ Connect docks to a PC via USB
PC control:
◆ Connect the dock to PC via USB Port for
enhanced control over calibrations and data acquisition
◆ Ethernet-ready system also available
All MultiPro IQ Express Docks include PC software, installation discs and
instruction manuals.
54-49-9000
54-49-9000N
110
WWW.MALLORYFIRE.COM
IQ Express Docking Station IQ Express Docking Station with
Ethernet ready system $795.00
$895.00
ToxiPro Gas Detector
ToxiPro is a fully serviceable, reusable gas detector with real-time
Peak, STEL, and TWA Readings, as well as a black box data recorder. A
full-featured datalogger is available as an upgrade for the Toxi Pro.
Biosystems introduces its smallest confined space detector — the MultiPro.™
The ToxiPro features one-button calibration. To make routine maintenance even easier, the ToxiPro can be used with the IQ Express Docking
Station – an automatic bump test and calibration station with built-in
recordkeeping.
The MultiPro offers real-time readings for
up to 4 gases, true one-button operation (including calibration), and a built-in event logger capable of storing information for 20 events
including sensor type, max and average readings,
time and duration. It’s available with either a
Li-Ion or an Alkaline battery pack and offers run
times up to 22 hours. For remote sampling, both
manual and motorized sample draw kits are available.
Standard Kit includes:
◆ Clothing clip, reference manual, and laminated quick reference card
◆ Rechargeable Li-Ion version includes charger, calibration adapter
◆ Training CD-ROM
Confined Space Kit includes:
All standard accessories, plus: standard sized (58 or 103 liter) cylinder of
all-in-one calibration gas, fixed flow regulator with gauge, foam-lined
waterproof carrying case
Value Kit includes:
All standard accessories, plus: compact sized (34 liter) cylinder of all-inone calibration gas, fixed flow regulator and foam-lined carrying case.
NOTE: PRICES LISTED FOR ALKALINE BATTERY, if you need Li-Ion, please
ask for quote. Many accessories and sensors, charging units and datalogging accessories are readily available.
Item
54-48-300
54-48-301
54-48-302
54-48-314
54-48-100
Sensors
Installed
LEL/O2
LEL/O2/CO
LEL/O2/H2S
LEL/O2/Duo-Tox
(CO/H2S)
LEL
Std
Kit
$445.00
$545.00
$545.00
Confined
Value
Space
Kit
$595.00
$885.00
$695.00 $1,045.00
$845.00 $1,165.00
$575.00
$415.00
$895.00
$565.00
$1,195.00
n/a
Data storage and downloading
◆ Standard event logger stores latest 20 events, including sensor type, max
reading, average reading, time and duration
◆ IrDA PC communication
◆ Standard black-box data recorder
◆ Datalogger upgrade optional
Batteriy life
◆ Replaceable Lithium battery - 9000 hours of operation
Sensors and calibration
◆ O2, CO, H2S, SO2, CO+, CO-H, Cl2, ClO2, NH3, NO2, PH3, HCN
◆ One-button automatic calibration
Alarms
◆ Low, high, STEL and TWA audible and visible alarms
◆ Optional vibrating alarm
Value kit - All standard accessories, plus:
Compact-sized (34 liter) cylinder of calibration gas., fixed-flow regulator
and foam-lined carrying case.
The new standard in inexpensive and reliable
gas detection
The MultiVision offers up to four independent
sensors for the detection of oxygen, combustible gas, carbon monoxide, and hydrogen sulfide. The instrument case is made of chromeplated ABS and is rated to IPX5 / IPX7 against
water ingress (immersible) and is rate for RFI
immunity to 40 V/m.
The MultiVision offers run times of up to 20 hours in diffusion mode and
up to 16 hours when using the internal the pump and NiMH battery
pack. Alkaline battery packs yield run times of up to 16 hours in diffusion
mode and up to 12 hours with the internal pump on between battery
changes.
A single button located on the left side of this compact and very weatherproof instrument controls all day-to-day instrument functions.
Alkaline
NiMH
LEL/O2/CO Alkaline LEL/O2/CO/H2S Alkaline LEL/O2/CO/H2S NiMH Design
◆ IP65/IP67 rated protection against water
and dust
◆ Compact and rugged
◆ Over-molded boot
◆ One button operation
◆ Large backlit display
◆ Loud alarm
◆ Top & front mounted LED alarm light.
◆ Translucent case option for enhanced alarm
visibility
◆ Optional built-in vibrating alarm.
◆ Exceeds IEC 6100-4-3 for level 3 RFI immunity specifications.
Standard accessories:
◆ Heavy-duty alligator clip
◆ Calibration adapter
◆ Reference manual and quick reference card
MultiVision Confined
Space Gas Detector
54-40-30100A
54-40-30100N
54-40-30100A 54-40-30102A
54-40-30102N Hazmat
MultiPro™ Multi-Gas
Detectors
$745.00
$945.00
$745.00
$895.00
$1,095.00
54-45-90
54-45-01
54-45-01K
54-45-05
54-45-05K
54-45-19
54-45-19K
54-45-02
54-45-02K
54-45-03
54-45-03K
54-45-21
54-45-21K
54-45-18
54-45-18K
54-45-09
54-45-09K
54-45-10
54-45-13
54-45-13K
Oxygen –Standard kit
Carbon monoxide Standard kit
Carbon monoxide Value kit CO Plus Standard kit
CO Plus Value kit
CO Minus H, reduced sensitivity to H2
CO Minus H, reduced sensitivity to H2
Hydrogen sulfide Standard kit Hydrogen sulfide Value kit
Sulfur dioxide Standard kit
Sulfur dioxide Value kit
Ammonia NH3 Standard kit Ammonia NH3 Value kit
Chlorine Standard kit
Chlorine Value kit
Nitrogen dioxide Standard kit Nitrogen dioxide Value kit
Hydrogen cyanide Standard kit
Phosphine Standard kit
Phosphine Value kit
800-MALLORY
$229.00
$239.00
$389.00
$239.00
$389.00
$299.00
$449.00
$239.00
$484.00
$350.00
$585.00
$399.00
$984.00
$375.00
$750.00
$375.00
$750.00
$375.00
$375.00
$750.00
111
Hazmat
Toxi Vision EX
Single- Sensor
Combustible Gas
Detector
Toxi Vision IR Single
Sensor Gas Detectors
for CO2 or CH4
This fully serviceable gas detector
features real-time gas reading, max
readings for the current operating
session, and customizable warning
and danger alarms to let you know
when combustible gas is present
The Toxi Vision IR is a fully serviceable
infrared methane detector with real-time current gas reading and max gas readings for the
current operating session. A pair of customizable alarms to let you know when methane is
present.
The Toxi Vision EX is available in your choice of Alkaline or
NiMH rechargeable versions. The NiMH rechargeable version includes a
black box data recorder and an event logger as standard equipment. The
black box in the NiMH version can be upgraded to a full-featured datalogger at any time after purchase. At this time, the alkaline version is not
available with any type of data recording system.
Design:
◆ One-button operation
◆ Large backlit display
◆ Loud alarm (92dBA @ 1 foot)
◆ Alkaline version is rated IPX5/IPX7 against water ingress and NiMH
version is rated IPX5
◆ RFI immunity to 40 V/m
◆ Top- and front-mounted bright LED
◆ Security beep (selectable via PC)
Batteries:
◆ Alkaline model runs up to 13 hours on 2 AA batteries
◆ NiMH model runs up to 15 hours between charges
◆ NiMH rechargeable version includes charger
Batteries
◆ Alkaline version provides up to 12 hours of operation
◆ NiMH rechargeable version includes charger and provides up to 15
hours of operation.
Readout and alarms:
◆ Programmable warning and danger alarms (via PC)
◆ Current and max gas readings
Data:
◆ NiMH version comes with standard black box data recorder and event
logger
◆ Alkaline version has no data recording options
Standard Accessory Kit includes:
◆ Belt clip, calibration adapter. reference manual, and quick reference
card.
◆ Rechargeable NiMH version includes charger.
Confined Space Complete Kit Includes:
◆ All standard accessories, plus
◆ Standard sized (103 liter) cylinder of calibration gas
◆ Fixed flow regulator
◆ Foam-lined waterproof hardshell carrying case
Item
Standard
Value Kit
$345.00
Data
◆ EventLogger is standard equipment on all ToxiVision IR instruments.
Black Box Recorder is standard equipment on the NiMH version.
Options
◆ Built-in vibrating alarm
◆ Protective rubber boot
◆ Datalogger (NiMH only)
◆ Sensor Information
◆ (NDIR) Non Dispersive Infrared
◆ CO2 Range : 0 – 5% vol
◆ CH4 Range : 0 – 10% vol or 0 – 200% LEL
Standard Accessories
◆ Belt clip
◆ Calibration adapter
◆ Event Logger
◆ NiMH unit includes Black Box Datalogger
◆ Reference manual
◆ Quick reference card
Confined Kit
ToxiVisonEx w/ Alkaline batteries
54-37-80A
Design
◆ Compact & rugged
◆ One button operation
◆ Large backlit display
◆ Loud multi-tone alarm (90dBA @ 1 foot)
◆ Alkaline version is rated IPX5/IPX7 against water ingress
◆ NiMH version is rated IPX5 against water ingress
◆ Top & front mounted bright LED
Readout and Alarms
◆ Programmable warning and danger alarms (via IrDA with PC)
◆ Current and max gas readings. STEL & TWA may be enabled in CO2
unit
Calibration
◆ One-button automatic calibration
Calibration:
◆ One-button automatic calibration
Value Kit Includes
All standard accessories, plus
◆ Compact sized (34 liter) cylinder of calibration gas
◆ Fixed flow regulator
◆ Foam-lined hardshell carrying case
Add suffix (K) for Value kit or (C) for Confined space kit
The Toxi Vision IR CH4 is available in your choice of Alkaline or NiMH
rechargeable versions. Both versions include an Event Logger as standard
equipment. The NiMH rechargeable version also includes a black box
data recorder, which can be upgraded to a full-featured datalogger at any
time after purchase.
$495.00
$675.00
$545.00
$725.00
54-37-50A ToxiVision IR CO2 with Alkaline Batteries 54-37-50N ToxiVision IR CO2 with Rechargeable Battery 54-37-51A ToxiVision IR CH4 with Alkaline Batteries 54-37-51N ToxiVision IR CH4 with Rechargeable Battery ToxiVisionEX w/Recharge. NiMH
54-37-80N
$395.00
Options and replacement sensors available, please call for more information.
112
WWW.MALLORYFIRE.COM
$1425.00
$1475.00
$1325.00
$1375.00
MiniRAE 3000 &
ppbRAE 3000
ChemRAE
Portable, Wireless, Chemical Warfare
Agent Detection Systems
The MiniRAE 3000 and ppbRAE
3000 are the most advanced handheld instruments for volatile organic
compounds (VOC). The Photoionization Detector’s (PID) extended
range of 0 to 15,000 ppm makes it
an ideal instrument for applications
from industrial hygiene, to leak and
HAZMAT detection.
The RF modem allows real-time data
transmissions with a base controller
located up to 500 feet (or two-miles
with optional RAELink2 portable
modem) away from the MiniRAE
3000 detector. A personal computer
can be used as the base station for a Mini-RAE 3000 system. The standard
ProRAE Remote software is capable of monitoring the input of up to 64
remotely-located monitors like MiniRAE 3000, or AreaRAE, etc.
◆ Proven PID technology
◆ The patented sensor provides the following unique features:
◆ - a 3-second response time
◆ - extended range up to 15,000 ppm with improved linearity
◆ - humidity compensation with inbuilt humidity and Temperature sensors
◆ Real-time wireless data transmission with built-in RF modem or Bluetooth.
◆ Design for service easy access to lamp and sensor in seconds without
tools.
◆ Big Graphic display for easy overview of gas type, Correction Factor and
concentration.
◆ Field interchangeable battery pack in second’s without tools.
◆ Integrated Flash Light for better view in dark conditions
◆ User-friendly screens including plot view chart view
◆ Inbuilt full RAE Systems 350 compounds correction factors list measure more chemicals than any other PID
◆ Multilanguage support with 10 languages encoded
◆ Rugged housing withstands use in harsh environments
◆ IP67 Waterproof design for easy cleaning and decontamination in water
◆ Strong protective removable Rubber Boot
Monitor with accessory/Calibration Kits
059-B111-100 MiniRAE 3000
059-C111-100 ppbRAE 3000 Hazmat
ppbRAE3000
$4,625.00
$7,125.00
SAFESITE®
Multi-Threat
Wireless
Detection System
Monitors, detects and communicates the presence of up to six potential
threats, including chemical warfare agents (CWA), gamma radiation, volatile organic compounds (VOC), toxic industrial chemicals (TIC), combustible gas and oxygen deficiency, and operates within a wireless network.
The SAFESITE System uses catalytic, electrochemical, surface acoustic
wave (SAW), photoionization detection (PID), cadmium zinc telluride
(CZT) and silicon detection technologies combined with advanced wireless communications.
Small enough to use as a personal detector,
a monitor for surveying contaminated areas
or a fixed installation detector.
ChemRAE is the latest in state-of-the
art handheld Chemical Warfare Agent
detection and identification systems. The
ChemRAE uses proven Open Loop Ion
Mobility Spectrometry (IMS) technology
for enhanced selectivity and sensitivity. It
is designed to detect Chemical Warfare
Agents and toxic industrial chemicals.
Can be used as a stand-alone portable
monitor or integrated into an AreaRAE
network by using a RAELink2 modem.
Integration into an Area RAE network allows you to add CWA to existing
complement of RAE Systems portable gas monitors. Weighs less than
2 lbs, can be powered by a rechargeable lithium-ion battery pack or AA
batteries. Clear and simple user interface can be operated with one hand.
ChemRAE stores agent alarm information for retrieval at a later time to
provide historical log of events. ChemRAE has no consumables and does
not require expendable desiccant cartridges. Designed for low life cycle
and operating costs.
Ideal for First Responders, HazMat Management, and Fixed and VehicleMounted CWA monitoring.
Please call for information on ordering and accessories.
Complete kits starting at $9,000.00
HazMat Kits
for identifying
unknown
chemicals
Deluxe HazMat Kit contains
the following: Gastec Model
GV-100 Pump Kit (GV-100S-TR), Gastec Detector Tube Handbook, hard shell carrying case, 5 meter
extension hose with rubber shroud tube holder, 2 light sticks, Decision
Chart I, Irritant Smoke Tube Kit (9500), M8 Detection Paper (1-0 Tests),
tweezers, Ammonia tubes (3L), Benzene tubes (121S),l Carbon monoxide
tubes (1LA), Chlorine tubes (8LA), Ethyl acetate tubes (141L), Hydrogen
cyanide tubes (12L), Hydrogen sulfide tubes (4LL), Hydrocarbons (low
class) tubes (103), Hydrocarbons (high class) tubes (105), Petroleum
naphtha tubes (106), Polytec I tubes (Qualitative Test) (107), Stoddard
Solvent tubes (128), Sulfur dioxide tubes (5LB). Note: Each kit contains
1 box of each type of Gastec tube listed in description. Most boxes contain
10 tubes unless otherwise noted.
Prices starting at $1,400.00
Call for pricing and more information.
800-MALLORY
113
Hazmat
MultiRAE Plus
PGM-50 Multi-Gas
Detector
QRAE II Multi-Gas Detector
The MultiRAE can be configured
from a simple, inexpensive Oxygen/LEL
monitor all the way to an affordable five-gas monitor for total protection
in toxic environments. Easily reconfigured and upgraded, MultiRAE’s
versatility allows it to replace a wide range of monitors, saving training
and maintenance costs. The MultiRAE can be quickly and easily changed
from a sophisticated technician instrument to a simple text or display-only
monitor. The same monitor can be used as personal monitor, a hand-held
sniffer, or area monitor for industrial hygiene work, emergency response
or confined space entry.
◆ Compact and lightweight for use in tight confined spaces
◆ Easy one-button calibration with auto-zero capability
◆ Runs on alkalines, NiCd batteries, or continuously when plugged into
charger or optional 12V automotive adapter
◆ Available as diffusion unit or with internal sample draw pump
◆ Internal pump provides quick response and remote sampling with 1012 hours of run time
◆ Programmable alarms can be changed on the MultiRAE or from
(Optional) easy to use Windows® software
◆ Internal memory holds response factors for 37 common LEL gases and
60 common VOCs (with ability to program custom factors)
Listed below are the most popular configurations, other configurations are available.
009-3121-010 MultiRAE Plus O2/LEL/H2S/CO/PID
$3,661.00
009-3121-014 MultiRAE Plus O2/LEL/H2S/CO/PID Kit $4,396.00
009-3891-010 MultiRAE Plus O2/LEL/NH3/PH3/PID
$4,554.00
ToxiRAE 3
Single-Gas Detector
A full-featured single-gas monitor that offers
unequaled cost of ownership value. The ToxiRAE
3 is compatible with the AutoRAE Lite bump
and calibration station. STEL, TWA, low, and
high alarms can also be recorded. The detector is
warranted for 2 years and maintenance free with
replaceable battery.
◆ Lowest cost of ownership on the market
◆ Rugged steel housing for harsh environments
◆ Fastest instrument response time for better protection & worker safety
◆ Compact, low-cost bump and calibration station enables the ability to
put the bump capability where it is needed
◆ High-performance 3-electrode pinless micro sensor with the fastest
response time
◆ 0.1 ppm H2S resolution, and high-range 1999 ppm CO available
◆ Large, easy-to-read display facilitates overview of gas concentration or
days remaining (end-user adjustable)
◆ Event logging of up to 10 events
◆ Full activity records when used with AutoRAE Lite calibration station
◆ Intuitive, simple-to-operate user interface
◆ IP-67 waterproof and dust resistant
◆ Loud, 95 dB audible alarm, bright red flashing visible LEDs and internal vibration alarm
◆ Color-coded labels for gas type
◆ Extended operating temperature of -4° to 140° F (-20° to +60° C) with
full T4 approval
◆ User-configurable bump/calibration reminders
G01-0102-000H2S Hydrogen Sulfide (1) 0 – 100ppm
G01-0101-000CO Carbon Monoxide (1) 0 – 500ppm
G01-0103-000CO Carbon Monoxide (1) 0 – 1999ppm
114
$179.00
$179.00
$179.00
The QRAE II is a compact multi-gas detector for
H2S, CO, O2, and combustibles.
Key features include externally accessed battery
packs, a water-resistant case and state-of-the-art O2
sensor technology with extended life.
◆ One to four plug-in sensors (combustibles,
oxygen SPE O2™, hydrogen sulfide, carbon
monoxide)
◆ Diffusion mode, with optional manual sample
pump
◆ Intuitive simple-to-operate two-button user interface
◆ Display can be flipped 180º with the push of a button for easy viewing
from belt or hand
◆ Multi-language support
◆ One-button calibration with auto-zero capability
◆ Loud 95dB audible alarm
◆ Bright red flashing visible alarm
◆ Vibration alarm
◆ Interchangeable drop-in Lithium-ion and alkaline battery packs
◆ Charging cradle doubles as an external battery charger
◆ Compatible with AutoRAE calibration station
◆ Optional Confined Space Entry Kit
020-1111-2AO
QRAE II
$695.00
ToxiRAE II
The ToxiRAE II is a single-gas, personal
protection monitor that continuously displays
toxic gas concentrations. It costs just a little
more than disposable detectors, unlike typical
disposables that only display “remaining life”,
the ToxiRAE II is a full-featured gas monitor
providing continuous, digital display of the gas
concentration, STEL, TWA, and Peak values as
well as high, low, TWA, and STEL alarms.
A simple to use one-button product, the
ToxiRAE II is easy to calibrate. Use the pre-set
alarms, or modify the alarms to meet your
specific requirements. In contrast to disposables
that are turned on once and remain on until
their batteries expire, you decide when and
where to use your ToxiRAE II and you turn it on and off accordingly.
◆ Large, easy-to-read continuous display of gas concentration in ppm
◆ Displays STEL, TWA, and Peak values
◆ Sensors available: H2S, CO, O2, NH3, Cl2, ClO2, HCN, NO, NO2,
PH3, SO2
◆ Field replaceable battery and sensor
◆ 2-Year warranty
◆ User adjustable high, low, STEL, and TWA alarms
◆ Varying audio alarm signals for different alarm conditions
Ideal for use in: Refineries, Oil and Gas, Contractors, Chemical, Pulp and
Paper plants, Fire Service and Industrial.
045-0512-000
045-0518-000
045-0516-000
045-0517-000
045-0511-000
5-0512-200
045-0006-000
045-0515-000
Carbon Monoxide 0-500ppm
Ammonia 0-50ppm
Chlorine 0-10pp
Hydrogen Cyanide 0-100ppm
Hydrogen Sulfide 0-100ppm
Carbon Monoxide 0-1999ppm
Oxygen 0-30%
Nitrogen Dioxide 0-20ppm
$205.00
$367.00
$367.00
$367.00
$205.00
$314.00
$205.00
$367.00
Please call for volume pricing and additional information.
WWW.MALLORYFIRE.COM
Hazmat
Miti ™ - your first choice for Decon/HazMat products.
This is only a small selection of their offering, so
please contact us for more information about their full
line catalog. From showers to berms and water supply
management, plus portable containment systems,
Complete Portable Decontamination Kit
DHK1-40 Single Pool, DeCon Hoop Wash Kit, contains 1 each of the
following:
◆ DH40 hoop
◆ DHSL25- 3/4” 25 ft. water supply hose
◆ DHSB- 4-Hoop storage bag
◆ DP-6 DeCon Pool
◆ DPL-66 liners (qty. 10)
◆ DBI-1414 Inflatable sidewall secondary berm
(14’w x 14’L x 7”D)
◆ FSI-1 Manually operated fluid soap injector
◆ P15 Diaphragm hand pump w/inlet and outlet hose fitted with camlock quick connectors
Ships FOB Origin
DHK1-40
Decon Kit
$5,145.00
Hy-D™ Hydrant Decontamination
Introducing a fast way to Decontaminate without having to set up shower
stations or tying up personnel. Just attach the Hy-D™ Nozzle directly
to the apparatus’ 2-1/2” discharge and you’ve got a shower that can wash
numerous people at a time. Or use the Hy-D™ Kit, which includes an
aluminum hydrant gate valve and stainless steel elbow, you can connect
to a fire hydrant quickly and not interrupt other assets in action. You can
select the Hy-D™ as a stand alone product or as a complete kit which
contains an aluminum hydrant gate valve, a 30 degree aluminum elbow
and a shorter hydrant wrench, packed in a portable zip top carry bag.
For Forestry applications, a Quarter Turn coupling is available and sold
separately below. Call 800-Mallory for volume quote.
Complete Portable Decon Kit
Hy-D™ Hydrant Decontamination,
Complete Kit
This revolutionary Hydrant Decontamination kit includes a Hy-D™ 21/2” nozzle, 2-1/2’ NH thread Stainless steel 30º elbow, 2-1/2” Aluminum hydrant gate valve and black nylon zip carry bag.
HYD Kit
Hy-D Decon Complete Kit $1,030.00
Hy-D™ Hydrant Decontamination Nozzle and Components
HY-D
Hy-D™ Components
RHQK1515
ESST32500125001
ESST42500125001
107-S
281A02500125001
Hy-D Decon Nozzle
Forestry 1-1/2” x 1-11/16” Coupling
Stainless Steel 30 degree elbow
Stainless Steel 45 degree elbow
Short Adjustable Hydrant wrench
Aluminum 2-1/2” Hydrant gate valve
$462.00
$72.00
$132.00
$132.00
$28.00
$359.00
Double Pool Decontamination Kit, contains 2 each of the following:
◆ DH40 HOOP
◆ DHSL25- 3/4” 25 ft. water supply hose
◆ DHSB- 4 Hoop storage bag
◆ DP-6 DeCon Pool
One Each of:
◆ DPL-66 liners (qty. 10)
◆ DBI-1426 Secondary containment berm (14’w x 26’L x 7”D)
[Inflatable sidewall secondary berm]
◆ FSI-1 Manually-operated fluid soap injector
◆ P15 Diaphragm hand pump w/inlet and outlet hose fitted with camlock quick connectors
Ships FOB Origin
DHK2-40
Decon Kit
$6,730.00
Many other configurations, options, and upgrades are possible, please ask.
Pools, hoop washers, and accessories, also sold separately.
Call for a complete price list.
800-MALLORY
115
Hazmat
Hazmat Decontamination System
FIRETAK® products are a proven decontamination system at a very economical price. All products
are collapsible, lightweight, and compact, which greatly reduces the storage space required. One or
two personnel can easily deploy this system in 10 to15 minutes. Repeated usage for training and
emergency situations is possible with these durable, chemical-resistant materials.
FIRETAK systems can be designed to suit your needs. You can choose a smaller or larger berm,
combine the 5- and 8-foot D-Con tanks or order additional hoops.
De-Con Hoops are designed to concentrate water directly onto the area being decontaminated, and
can be used with stretchers.
FIRETAK D-Con Package
Our Standard Fire Service D-Con package included the following:
◆ One 16 x 40 ft inflatable berm with case
◆ One set of three collapsible 5 ft D-Con tanks with case
◆ One collapsible hoop with case
◆ One 3/4” x 50 ft lay-flat GHT hose
◆ One 1-1/2” female x 3/4” male adapter
SFSDC
D-Con Package
CALL FOR PRICING
FIRETAK Berms
Available with either air-filled cells in the sidewalls or supporting stays on
the sidewalls. Both styles are compact for storage and transportation. The
most economical berm on the market. Applications are unlimited and we
can supply almost any size.
Item EAB1414
EAB1026
EAB2020
EAB1640
EAB1414C
EAB1026C
EAB2020C
EAB1640C
Size
Weight
14’ x 14’ x 7” 55lb
10’ x 26’ x 7” 72lb
20’ x 20’ x 7” 80lb
16’ x 40’ x 7” 112lb
EAB1414 Case
EAB1026 Case
EAB2020 Case
EAB1640 Case
Collapsed
Size
18” x 24” 22” x 30” 24” x 24” 24” x 36” Price
$1,200.00
$1,450.00
$1,575.00
$1,875.00
$90.00
$90.00
$90.00
$100.00
FIRETAK D-Con Tanks
A revolutionary new concept for containment of liquids when decontaminating HazMat Crews. Constructed of tough, PVC-coated, liquid-proof
material with an air-filled collar and supporting stays in the sidewalls, this
product fits in a small case for easy storage.
DC1-5
DC1-8
DC3-3
116
5 ft top diameter tank with case
$625.00
8 ft top diameter tank with case
$800.00
Set of three - 5 ft top diameter tank with case $1,650.00
WWW.MALLORYFIRE.COM
Hazmat
Secondary Containment
FIRETAKBERMS- Mini Dripper & Big Dripper- are a convenient portable containment system for quick and temporary storage of hazardous
materials. Using a chemical resistant material, the applications include
chemical and fuel transfer spills, leaking containers such as drum barrels
and pails, and drip and spill catchers for machinery.
Cleaning and decontaminating large vehicles and equipment is simplified
by the drive-over sidewall Big Dripper Berms.
Item
Size
Capacity
MD22-4
2’ x 2’ x 4”
10 Gallon
MD33-4
3’ x 3’ x 4”
22 Gallon
MD44-6
4’ x 4’ x 6”
59 Gallon
MD77-6
7’ x 7’ x 6”
183 Gallon
BD1414
14’ x 14’ x 6”
733 Gallon
BD1640
16’ x 40’ x 6”
2394 Gallon
Other sizes including custom sizes are available. Please call.
Price
$125.00
$140.00
$175.00
$260.00
$1,100.00
$2,450.00
Environmental Control Products
Super Vac offers a number of products that help you control
your environment. Many times emergency personnel are faced
with blowing snow, driving rain, or blazing sun. These products
can help lessen the effect the environment has on you and your
patients. All of these products are built with the same attention
to detail and quality that has become the Super Vac trademark.
The Rapid Tent is sewn to exacting Super Vac requirements by seamstress’s with year of
experience in making high quality fabric tents. It (or other shelters and tents) is the perfect
way to catch the heat generated by the Heatpac25. The Heatpac25 can also be used by
itself to warm trapped patients waiting for extrication and as a rehab tool for firefighting
in frigid conditions. Super Vac’s AirPac series of ventilators are perfect for your confined
space ventilation requirements. Build of rugged polyethylene material, they are lightweight
yet extremely durable. These fans are supplied with 25’ of ducting to get the air deep into
a confined space or they can be used with “L” duct. These fans all come standard with 110 VAC motors and can be special ordered with 220 VAC motors.
The Mister fan is the ideal solution for firefighter rehab during extended summertime calls. By adding a small amount of mist to the airstream, ambient
temperatures can be lowered by a significant amount. This greatly reduces the time spent by firefighters in the rehab sector.
RAPID TENT
The Rapid Tent provides a spacious 100 square feet of unobstructed floor space with over 7 feet of headroom, yet can be
deployed in under one minute. These units can be combined with one another to double the floor space
and can be provided with an optional rear door. The ground flaps provide stability, while the open
floor design makes them perfect to set over a wrecked car or for easy clean up after Haz-Mat situations. Perfect for Haz-Mat or Dive Teams in northern latitudes, and to provide quick shelter
for Command Staff during an extended incident. Shown above fully set up with Heatpac25.
RT10x10
Rapid Tent, 10x10
$2,850.00
800-MALLORY
117
Hazmat
SuperCharged™
X80 Towels
X60 Wipers
WypAll® X80 Towels
have been upgraded with
Supercharged™ technology,
making these the choice for
the toughest jobs. Made
using patented Hydroknit®
fast-absorbing material.
Softer and more absorbent
than ever. Pound for pound
absorbs more water and oil, and guaranteed more cost-effective than
rental shop towels or rags. Ideal for heavy wiping, prepping surfaces with
solvents, and cleaning metal shavings and rough surfaces.
Wypall® X60 wipers bring
the absorbing power of our
Hydroknit® technology to a
lighter-weight wiper. Designed
to out-perform rags, Wypall® X60
wipers raise the standard for general-purpose wipers. White in color.
◆ No adhesives or binders, leaves no residue
◆ Reinforced for extra scrubbing and cleaning power
◆ Tough enough for big jobs - soft enough for face and hands
Item
41055
41043
41044
41041
05930
41026
Description, Size
Jumbo Roll, 12.5” x 13.4”
Jumbo Roll, 12.5” x 13.4”
Brag® Box, 12.5” x 16.8”
Brag® Box, 12.5” x 16.8”
Pop-Up® Box, 9.1” x 16.8”
1/4 Fold, 12.5” x 14.4”
Color
Red Blue
White
Blue
Red
White
Sheets
475
475
160
160
80
50
Price
$70.64
$67.50
$28.50
$24.59
$16.20
$8.48
Tough, Versatile, Excellent
Value
Item
34955
34015
34790
34865
Description, Size
Jumbo Roll, 12.5” x 13.4”
Brag® Box, 12.5” x 16.8”
Pop-Up® Box, 9.1” x 16.8”
1/4 Fold, 12.5” x 14.4”
Item
05841
05816
05812
Durable, absorbent
manufactured rags that
stay strong for better cleaning
performance. Reusable, long-lasting X70 Workhorse rags cleans oil,
grime, and solvents. Made with our high-tech Hydroknit® fast absorbing
material. Ideal for all manufacturing and maintenance & repair. White
in color.
Item
41600
41100
41200
41300
41455
Description, Size
Jumbo Roll, 12.5”x14.4”
Flat Sheet Rag, 14.9”x16.6”
Flat Sheet Rag, 12.5”x14.4”
Brag® Box, 12.5”x16.8”
Pop-Up® Box, 9.1”x16.8”
Sheets
870
300
76
152
100
80595
80579
73900
09107
Dispensers
Item
09107
80595
80579
73900
118
Price
$110.20
$67.10
$9.93
$28.76
$12.50
Description
1/4 Fold Wipe Dispenser
Jumbo Roll Dispenser
Jumbo Roll Wall Mount
Access® Dispenser
Color
Grey
Black
Black
White
Price
$17.33
$38.00
$38.00
$8.40
Sheets
1100
180
126
76
Price
$83.50
$15.44
$9.08
$6.70
Sheets
950
120
90
Price
$46.00
$8.90
$4.16
L30 Wipers
Great for light-duty cleanups. Perfect
for janitorial and maintenance wiping.
◆ Cloth-like feel at a value price
◆ Strong, yet soft enough for
personal use
◆ Great replacement for air laid
wipers
X70
Workhorse®
Description, Size
Jumbo Roll, 12.5” x 13.4”
Pop-Up® Box, 16.4” x 9.8”
1/4 Fold, 12.5” x 14.4”
KIMTEX®
Designed for wiping tasks where low
lint or use of chemicals are required.
Engineered for critical applications
involving solvents, inks, and paints.
Acid, base and solvent resistant.
Perfect for use with lubricants, oil and grease.
Polypropylene construction. Applications include furniture finishing,
engine assembly/repair, pre-packaging wipe down, LCM panel assembly,
appliance assembly, printing, and glass or window cleaning.
Blue color. Use WypAll dispenser holders.
Item
Description, Size
33241
Jumbo Roll, 9.6” x 13.4”
33352
Brag® Box, 12.1x 16.8”
33560
1/4 Fold, 12” x 14.4”
33570
Pop-Up® Box, 8.8” x 16.8”
Sheets
717
180
66
100
Price
$108.30
$38.00
$10.98
$20.02
Delicate Task Wiper
A light-duty wiper that can handle
a variety of delicate tasks. Easily
wipes up liquid and dust. Anti-stat
dispensing reduces lint and electrostatic discharge, controls usage and
portability reduces waste. Larger case quantities are available.
Item
34120
34133
34256
WWW.MALLORYFIRE.COM
Description, Size
Pop-Up® Box, 4.4” x 8.4”
Pop-Up® Box, 11.8” x 11.8”
Pop-Up® Box, 14.7” x 16.6”
Sheets
280
196
140
Price
$3.16
$4.38
$7.09
Sorbent SOCs™
Dependable, flexible tubes
that contain and absorb
liquids. Contribute to cleaner
and safer work environments.
They mold around corners
and conform to uneven
surfaces to prevent and soak
up spills and drips. Available
in a variety of types and sizes.
Ideal for industry, chemical plants, manufacturing,
transportation, printing and
utilities.
◆ Slikwik®-Excellent value, corncob-filled Slikwik are extremely flexible
and mold easily into tight corners and odd spaces. Not intended for use
against aggressive fluids.
◆ Oil Only- This SOC will not absorb water or water-based solutions.
Wringable and incinerable.
◆ Allwik™- An all purpose maintenance SOC with moderate chemical
resistance that makes it suitable for most industrial applications. Can be
wrung and incinerated.
◆ Hazwik®-The choice when chemical resistance is critical. Color coded
green, delivers performance against aggressive fluids. Wringable and
incinerable.
www.sorbentproducts.com
Oil Sorbents
Land or
water
Convenient, lightweight and cost-effective, SPC Oil Sorbents absorb up to 25 times their
own weight in petroleum products. These oil sorbents will not absorb
water, will float indefinitely, are wringable, dustless, unaffected by temperature, flame resistant, and impervious to both rot and mildew. They
incinerate to less than 0.02% ash.
SPC100
SPC200
SPC810
SPC10
15” x 19” Full heavy-weight, dimpled and perfed pads 100/bale
15” x 19” Wiper weight, dimpled and perfed pads 200/bale
8” x 10’ Lint-free booms no gap, 4/bale 14” x 25” Lint-free Jumbo Pillows, 10/bale
$73.64
$82.83
$207.06
$121.10
Item
SW46
OIL430
AW430
HAZ412
Description
SlikWik® , 3” x 46” Oil Only, 3” x 4’ Allwik™, 3” x 4’ Hazwik®, 3” x 4’ Qty
40/case
30/case
30/case
12/case
Slikwik Drip
Pans
SLIKWIK®
www.sorbentproducts.com
Boom
New to the SPC product line, these contractor-grade, oil-only sorbents are ideal for environmental applications. ENV Oil Sorbents comprise
the best available basic meltblown polypropylene.
Packed in distinctive green bags. They are an
obvious choice when you need low cost plus high
performance.
Convenient, lightweight, and cost-effective, ENV Oil Sorbents absorb up
to 25 times their own weight in petroleum products. These oil sorbents
will not absorb water, will float indefinitely, are wringable, dustless, unaffected by temperature, flame resistant and impervious to both rot and
mildew. They incinerate to less than 0.02% ash. Available in standard
pads, boom, and rolls, sizes and weights.
Item
ENV100
ENV200
ENV300
ENV50
Item
ENV810
Item
ENV150
Case Price
$80.64
$119.43
$104.43
$78.60
Slikwik Pillows
www.sorbentproducts.com
Contractor-Grade
Oil Sorbents - for land or
water
Hazmat
www.sorbentproducts.com
Pads
Price
15” x 19” Economy, heavy weight, 100/bale
$59.08
15” x 19” Economy, light weight, 200/bale
$55.95 15” x 19” Economy, medium weight, 100/bale $58.63
33” x 39” Jumbo size, medium weight, 50/bale $115.75 Booms
Price
8” x 10’, Economy boom, lint free
$120.57 Rolls
Price
38” x 144’, medium weight value roll
$90.99
Absorbent Slikwik pillows meet a
variety of cleanup and safety needs. Frequently combined with drip pans, these
pillows are excellent for absorbing spills
and leaking fluids in tight spaces.
◆ Oil Only pillows; used in waste
troughs, coolant tanks, fluid reservoirs and sump wells
◆ Allwik™; for absorption of oil, water
and chemicals
◆ Hazwik®; intended for use with hazardous materials
Slikwik Pillows
Item
OIL1818
OIL99
AW1818
AW99
HAZ1818
HAZ99
Description
Oil Only, 18” x 18” Oil Only, 9” x 9” Allwik™, 18” x 18” Allwik™, 9” x 9” Hazwik®, 18” x 18” Hazwik®, 9” x 9” Qty
16/case
32/case
16/case
32/case
16/case
32/case
Case Price
$116.46
$92.70
$80.35
$90.07
$129.74
$90.43
24/case $152.93
25/case 25/case $81.58
$81.58
Slikwik Drip Pans (single-use units)
DPA24
Allwik™, 10” x 10” Slikwik Drum Top Covers
DT025
DTA25
Oil Only, 22” diameter
Allwik™, 22” diameter
800-MALLORY
119
Hazmat
www.sorbentproducts.com
Portable Economy Spill Kit
Extremely portable economy spill kit packed in
reusable stuff sack.
Contents:
◆ Ten - 15”x19” pads
◆ Two - 3”x12’ socs
◆ One - 18”x18” pillows
◆ One pair nitrile gloves
◆ One - disposal bag
◆ Instruction sheet
www.sorbentproducts.com
BattleMat
High-Traffic Mats
The BattleMat is ready to go to war against tough leaks and drips! It’s
SPC’s most absorbent mat. It’s durable, double-perforated, and BattleMat’s unique camouflage design hides any messy drip or stain it comes in
contact with. BattleMat can be used longer because of it’s unique, tough
design, therefore minimizing excess waste. Absorbs virtually any oil, water
or chemical-based liquid. Item BM15 is perforated every 9” and up the
center. Item BM30 perforated every 15” and up the center.
BM15
BM30
15” x 150’ rolled bale
30” x 150’ rolled bale
$110.70
$218.72
www.sorbentproducts.com
Oil Plus is very effective
in absorbing oil and
petroleum products. A
heavyweight dimpled
material notable for its
low lint, thickness and
strength. Will not pick
up water.
Portable Spill Kit
$66.53
www.sorbentproducts.com
Portable Bucket
Spill Kit
Extremely accessible spill kit in a reusable bucket. For small response.
Contents:
◆ Ten - 15”x19” Pads
◆ Three - 3”x4’ Socs
◆ One Pair Nitrile Gloves
◆ Two - Disposal Bags
◆ Instruction Sheet
SKABKT
Oil Plus
OP100
OP15
SKASAK
Small Bucket Spill Kit
$58.96
www.sorbentproducts.com
Portable Chemical Lab Spill Kit
15” x 19” Full-size Perfed Pad, 100/bale 15” x 150’ Roll
$76.03
$81.46
UL approved water and chemical resistant polyethylene Lab Pack container with screw top lid for small to
medium response. Contents:
◆ Twelve - 15”x19” Pads;
◆ Three - 3”x12’ Socs
◆ Two - 18”x18” Pillows
◆ One Pair Goggles
◆ One Pair Nitrile Gloves
◆ Three - Disposal Bags
◆ Emergency Response
Handbook
SKH20
Chemical Lab Spill Kit
$247.58
www.sorbentproducts.com
Wheeled Spill Kit
www.sorbentproducts.com
MRO
Plus
Dependable all-purpose gray dimpled material combining thickness,
strength, and high absorbency for virtually any industrial application
involving clean-up and removal of oil, and water-based liquids.
Other styles available, so please ask if you do not see what you are looking for.
MRO100
15” x 19” Full-size Perfed Pad, 100/bale $85.81
MRO15
15” x 150’ Roll
$98.07
MRO15P
15” x 150’ Roll perfed every 18”
$102.95
120
Large polyethylene boxes are chemical and water resistant. Wheel-mounted for maximum mobility, spill trucks provide highest level of readiness.
Not suitable for outdoor use.
Contents:
◆ 133 - 15”x19” Pads
◆ 24 - 3”x4’ Socs
◆ 12 - 3”x12’ Socs
◆ 8 - 18”x18” Pillows
◆ 1 Pair Goggles
◆ 1 Pair Nitrile Gloves
◆ 15 - Disposal Bags
◆ Emergency Response Handbook
SKALT
WWW.MALLORYFIRE.COM
Wheeled indoor spill kit
$1,498.42
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement