E Series E Series E10 E12 E15 E18SW

Add to my manuals
4 Pages

advertisement

E Series E Series E10 E12 E15 E18SW | Manualzz
E Series
Passive Loudspeakers
E Series
Passive Loudspeakers
E10
10” Two-Way Passive Loudspeaker
E12
12” Two-Way Passive Loudspeaker
E15
15” Two-Way Passive Loudspeaker
E18SW
18” Passive Subwoofer
Features
• High power capacity
E10 – 300 W (continuous)
1200 W (peak)
E12 – 400 W (continuous)
1600 W (peak)
E15 – 500 W (continuous)
2000 W (peak)
E18SW – 800 W (continuous)
3200 W (peak)
•E Series Entertainment System –
Advanced digital signal processing
tunings and options using QSC
GXD, PLD amplifiers or TouchMix
digital mixers.
•Rugged tour-grade textured paint
•Foam-lined perforated steel grill
•E10 suitable for main PA and
stage monitor
•Available U-style yoke, threaded
rod bracket and M8 rigging kit for
permanent installation
•Dual angle pole socket
(two-way models)
•Subwoofer includes speaker pole
Preliminary
Specifications
Entertainment Venues ∙ Rental/Production ∙ HOW ∙ Mobile Performers
The E Series is a range of passive
loudspeakers intended for sound
reinforcement applications including live
performance, DJ and dance music, karaoke
and production. With continuous power
ratings from 300 to 800 watts, E Series is a
great match for QSC GXD and PLD
amplifiers. While E Series speakers will
perform well with any professional amplifier,
QSC has developed custom DSP tunings
for GXD and PLD amplifiers that will
produce extraordinary results.
E Series consists of four models
constructed of rugged plywood and coated
in black, textured paint. Heavy-duty grilles
lined with foam provide protection for the
woofers and a professional appearance. All
three two-way models are equipped with an
all metal, dual-angle, 35mm socket that
allows the speaker to be mounted vertically
on a pole or angled down by 10° to improve
audience coverage and reduce rear wall
reflections. Multiple mounting options using
E Series accessories are supported. Input
connections include dual NL4 as well as
screw terminal receptacles.
E10
The E10 is a compact, two-way
loudspeaker with a 10-inch, die cast frame
woofer with a 2.5-inch voice-coil housed in
a multi-purpose enclosure that’s at home in
stage monitor or main PA deployment. It
incorporates QSC DMT™ (Directivity
Matched Transition) design with a wide 85°
coverage. When used as a stage monitor,
the E10 is angled up at a 55° angle allowing
it to be placed near the performer when
used on a crowded stage.
E12
The E12 is a trapezoidal, two-way
loudspeaker using a 12-inch die cast
aluminum woofer with a 3-inch voice-coil.
The 15mm, 11-ply enclosure provides
enough volume to deliver solid lowfrequency extension down to 65 Hz making
it an excellent choice for applications in
which space or budget preclude the use of
a subwoofer. The DMT coverage angle of
85° is ideal for most medium and mediumlong throw applications.
E15
The E15 is a trapezoidal, two-way
loudspeaker using a 15-inch, 500W, die
cast aluminum frame woofer with a 3.5-inch
voice coil. It is intended for use when highpower and authoritative low-end are needed
from a full-range loudspeaker. A 2.8”
compression driver attached to the 75°
DMT waveguide assures that even distant
listeners will be well covered.
E18SW
The E18SW is a high-performance direct
radiation subwoofer with a single, 800W,
18-inch, aluminum frame woofer. It is
designed to produce crushing low-end for
live performance with kick-drum and bass in
the PA or for high-level, high-energy dance
music. A threaded, M20 pole socket and
speaker pole are provided for sub/satellite
use with any of the E Series two-way
models. For portable applications it includes
attachment points for four optional casters.
The subwoofer’s 4-ohm impedance means
that a single woofer can be optimally
powered by a less expensive amplifier.
PLD, GXD and TouchMix Tunings
E Series loudspeakers will perform very well
with any quality, professional power amplifier
– but by taking advantage of the complete
QSC entertainment system, more
performance and options are available.
Today’s powered loudspeakers rely on finely
tuned digital signal processing (DSP) to
achieve a higher level of performance. When
used with QSC PLD or GXD amplifiers or
with a QSC TouchMix digital mixer, E Series
loudspeakers can also take advantage of
advanced DSP. QSC has developed
E Series DSP settings for all three platforms.
These settings support a variety of
applications including live sound
reinforcement (with and without subwoofers),
stage monitoring, dance music and karaoke.
E Series Details
Deployment:
Specifications:
E10
E12
E15
E18SW
Configuration
1 x 10-inch, 2-way,
non-powered
1 x 12-inch, 2-way,
non-powered
1 x 15-inch, 2-way,
non-powered
1 x 18-inch, subwoofer,
non-powered
Frequency Range (-6dB)
63Hz – 20kHz
62Hz – 20kHz
55Hz – 20kHz
37Hz to 230Hz
Power capacity1: continuous/peak 300W / 1200W
400W / 1600W
500W / 2000W
800 W / 3200W
Sensitivity2
95dB, 1W@1m
96dB, 1W@1m
97dB, 1W@1m
98dB, 1W@1m
Coverage Angle
85° axis symmetrical
85° axis symmetrical
75° axis symmetrical
N/A
Output1 (Peak SPL @ 1M)
126dB
128dB
131dB
132dB
254 mm (10-inch) driver with
64 mm (2.5-inch) voice coil;
305 mm (12-inch) driver with
76 mm (3-inch) voice coil
381 mm (15-inch) driver with
89 mm (3.5-inch) voice coil
457 mm (18-inch) driver with
102 mm (4-inch) voice coil
HF
25 mm (1-inch) exit, 45 mm
(1.75-inch) voice coil,
compression driver
25 mm (1-inch) exit, 45 mm
(1.75-inch) voice coil,
compression driver
38 mm (1.5-inch) exit, 71 mm
(2.8-inch) voice coil,
compression driver
N/A
Nominal Impedance
8Ω
8Ω
8Ω
4Ω
Cross-over
Full-range only, 1.8 kHz
Full-range only, 1.8 kHz
Full-range only, 1.55 kHz
Recommended 80 – 120 Hz LPF
Input Connectors
2 x NL4 1 x barrier strip
2 x NL4 1 x barrier strip
2 x NL4 1 x barrier strip
2 x NL4 1 x barrier strip
Enclosure
Multi-angle, plywood, black
texture paint finish. One top
mounted handle.Perforated,
powder-coated steel grille
with foam lining.
Trapezoidal, plywood, black
texture paint finish. Two side
mounted handles. Perforated,
powder-coated steel grille with
foam lining.
Trapezoidal, plywood, black
texture paint finish. Two side
mounted handles. Perforated,
powder-coated steel grille with
foam lining.
Rectangular, plywood, black
texture paint finish. Four side
mounted handles. Rear panel
provision for optional casters.
Perforated, powder-coated steel
grille with foam lining.
Mounting and suspension
6 x M8 suspension points, dual
angle, 35mm pole-socket
6 x M8 suspension points, dual
angle, 35mm pole-socket
6 x M8 suspension points, dual
angle, 35mm pole-socket
M20 threaded pole mount socket.
Net Weight
20 kg / 44 lbs
23 kg / 51 lbs
31 kg / 68 lbs
43 kg / 95 lbs
Shipping Weight
23 kg / 50 lbs
26 kg / 57.5 lbs
34 kg / 75 lbs
48 kg / 106 lbs
Dimensions
330x560x330 mm
13x22x13 in
360x616x371 mm
14.2x24.2x14.6 in
420x716x445 mm
16.5x28.2x17.5 in
590x616x605 mm
23.2x24.2x23.8 in
Drivers
LF
Preliminary
Specifications
Power that the device can withstand for 2 hours without permanent change in acoustical, mechanical, or electrical characteristics, greater than 10%,
using IEC60268 noise based on nominal impedance in the cabinet with Xover, full range 30Hz 12dB/oct
(1)
Specifications are subject to change without notice.
E Series Details
E10, E12 & E15
Input Plate
Block Diagram
NL4
NL4
1+
1-
HPF
HF
LPF
LF
2+
21+
12+
2-
Barrier +
Strip -
E18SW
Input Plate
Block Diagram
NL4
NL4
1+
12+
21+
12+
2-
Barrier +
Strip -
Preliminary
Specifications
LF
E Series Dimensions
E10
Front
E12
Side
Front
Side
24.2"
616 mm
22"
560 mm
13"
330 mm
14.2"
360 mm
Top
13"
330 mm
E15
Front
Top
14.6"
371 mm
E18SW
Side
Front
Side
24.2"
616 mm
28.2"
716 mm
23.2"
590 mm
16.5"
420 mm
Top
17.5"
445 mm
Preliminary
Specifications
Top
23.8"
605 mm
1675 MacArthur Boulevard • Costa Mesa, CA 92626 • Ph: 800/854-4079 or 714/957-7100 • Fax: 714/754-6174
© 2016 QSC, LLC all rights reserved. QSC and the QSC logo are registered trademarks of QSC, LLC in the U.S. Patent and Trademark office and other
countries. All other trademarks are the property of their respective owners. Patents may apply or be pending.
E Series Spec Sheet 02/09/2016
please recycle

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement