Analog: Digital Delay Pedal Simulates a warm and smooth echo sound created by classic analog delay equipment. Real Echo: Simulates a natural echo sound in real environment. Tape Echo: Simulates the sweet and spacy echo sound from a vintage tape echo machine. 3 7 6 8 9 4 5 1. TRUE BYPASS Footswitch: Push down the footswitch to switch between effects and bypass status. 2. ON/OFF LED: Instructs effects or bypass status of REECHO, when the LED is lit up, the effects is on. 3. DC IN Power Jack: For power supply, use a 9-volt DC regulated AC adapter(plug polarity is positive on the barrel and negative in the center). 4. INPUT Jack: 1/4” mono audio jack, for connecting guitar. 5. OUTPUT Jack: 1/4” mono audio jack, outputs the signal. 6. Mode Switch: Switch between Analog mode, Real Echo mode and Tape Echo mode. 7. E.LEVEL Knob: Adjust the level of delay effects. 8. F.BACK Knob: Adjust the feedback of delay effects. 9. TIME Knob: Adjust the delay time. Main Features 3 Delay Modes: Analog/Real Echo/Tape Echo Full metal shell Very small and exquisite True bypass DC 9V Adapter power supply Delay Modes: 3 (Analog, Real Echo, Tape Echo) Delay Time: 5ms-780ms Input: 1/4” monaural jack (impedance: 470k Ohms) Output: 1/4” monaural jack (impedance: 100 Ohms) Power Requirements: AC adapter 9V DC (center minus plug) Current Draw: 128 mA Dimensions: 93.5mm (D) × 42mm (W) × 52mm (H) Weight:160g Accessories: Owner’s Manual * Disclaimer: Any specification’s update won't be amended in this manual.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project