Radius AoIP Console
Radius AoIP Console
Maximum mixer... minimum price
Newconsoles out of reach?
Radius is withinyour grasp.
Everybody knows you get what you pay for. And sometimes,
quite a bit less. Have you ever noticed how “affordable” radio consoles are
usually missing stuff? Important stuff. Trying to do a radio show with a board like that
is like trying to open a can with a spoon: you might succeed eventually, but you sure won’t enjoy it.
At Axia, we believe that having a reasonable equipment budget shouldn’t mean having to settle for a stripped-down, poorly
built, featureless plastic excuse of a console. We’ve decided you should get more than you pay for — much more. Introducing
Radius, the new IP console that proves you can have your cake and eat it, too.
About Axia networks.
Axia is the AoIP division of Telos Systems, a technology leader in professional audio equipment for radio broadcasters since 1984.
In 2003, we introduced the world’s first Ethernet-based console system for broadcasting. At the time this was a new idea, but VoIP
showed the telecom industry how powerful, flexible and cost-efficient it was to move audio via IP, and the idea caught on fast with
broadcasters, too. AoIP (sometimes called IP-Audio) is mainstream technology now, with more than 2,000 radio studios around the
world equipped with Axia networks.
Axia helps you build studio facilities to meet today’s most demanding broadcasting applications. With Axia, you can quickly and
easily connect a few rooms, or an entire facility. Axia networks have a total system capacity of more than 10,000 audio streams, and
can carry hundreds of digital stereo channels (plus machine logic and PAD) over a single CAT-6 cable, eliminating much of the cost
normally associated with wiring labor and infrastructure.
For example: a couple of Axia interface nodes, connected together, can move a group of audio signals over an Ethernet cable from
one room to another. Connect with fiber and you can go across campus. Attach a few more nodes and a switch and you have a
distributed multi-room routing switcher. Plug in a mixing surface and console engine to add a powerful networked broadcast
console. Add intercom stations for broadcast-quality plant communications that can be taken to air. Plug in your delivery system PC
and you can transfer files, live audio, and associated data all over the same network. And since Axia audio is networked, Analog and
digital signals are merged seamlessly; cross-point switching from any source to any destination is fast and easy.
But there’s much more to Axia than just the network. Once all of your consoles, peripheral devices and computer workstations are
connected together for unlimited sharing, it’s easy to add phone systems, audio processors, codecs, satellite receivers, program
delay units, or any audio device from the ever-growing list of Axia Partners. All of these devices work together in tight integration,
which leads to more intuitive and intelligent operation. By taking advantage of the efficiencies of computer networking, Axia simplifies, saves you money, gives you choices, and prepares you for the computer and data-centric studios of today — and tomorrow.
Everythingyouneed, inoneelegant package.
Radius is the easiest AoIP console ever. Just connect the 8-fader mixing surface to the QOR.16 (a sophisticated, integrated console
engine), plug in sources and power, and you’re ready to make great radio!
Radius features three stereo Program buses and a stereo utility bus that can be used for recording phone calls and off-air bits, or as
a fourth Program bus. Radius generates automatic mix-minus for phone callers and remote talent, helping ensure seamless, error-free
shows. Bright multi-segment LED meters are switchable between VU and PPM styles, and high-resolution OLED displays for each
fader show source assignments, audio options and more. Show Profiles can be saved and recalled to instantly load frequently-used
console configurations. Need additional I/O? Just plug in Axia audio nodes. Radius also has four GPIO logic ports for machine control
of studio peripherals, six 100Base-T ports for Livewire devices, and two Gigabit ports with SFP for connection to the outside world.
See AxiaAudio.com/radius/ for more details. | Radius AoIP Console |
2 | RADIUS AoIP Console
Because it’s so compact, Radius is the perfect standalone console, but those Gigabit ports can connect to other studios too. Radius’
network gateway lets you load up to 8 audio sources from anywhere in your Livewire network, while sending up to 8 local streams
back out to the net.
Like all Axia consoles, Radius is built for long-lasting reliability, ready to stand up to anything your operators throw at it, with an EMtight machined aluminum frame, silky-smooth conductive- plastic faders, aircraft-quality switches and rotary controls, and
OLED high-rez displays on every fader.
The Radius System
Radius control surface:
Radius is the AoIP console you’ve been waiting for. Small enough to fit any
desktop - it’s just 20 inches square, with no cutout required. Easy to install?
It couldn’t be easier: there’s just one cable for power, logic and control that
connects to the DSP mixing engine. Plug it in, turn it on, perform some
fast Web-based config with your laptop’s browser, and you’re ready to rock.
Aircraft-quality switches and rotary encoders are used throughout. An
anodized, machined-aluminum surface and extruded aluminum frame to
trap RF. Dimmable LED lighting in all keys. Hi-rez OLED displays on every
fader. Automatic mix-minus on every fader, too. One-touch Record Mode
for instant off-air recording. Four Show Profile “snapshots” for instant settings recall. Responsive LED bargraph meters with switchable VU or PPM
metering styles. And the list goes on, and on, and on...
QOR.16integratedaudioengine:
Audio I/O, GPIO, console CPU, super-duty power supply, even a network
switch, are all built into the QOR.16. Just plug in your mics, CD players, codecs, profanity delays, and other audio gear. There are 16 audio I/O ports,
plus an Ethernet switch and logic ports:
hh Two Mic inputs with switchable Phantom power
hh Eight Analog inputs and four Analog outputs
hh One AES/EBU input and output
hh Four GPIO logic ports for machine control of studio peripherals
hh Six 100Base-T ports for Livewire devices
hh Two Gigabit ports with SFP connections
InformationRich.
OLED (Organic Light-Emitting Diode) technology is something Axia is
pretty excited about. Unlike ordinary LED or LCD displays, OLEDs are highresolution displays that are extremely bright, high contrast, and razorsharp. Axia designers placed an OLED on every Radius fader strip and
packed it full of information.
For instance, press the Options knob at the top of any fader strip, and the
OLED at the bottom lights up. Twist the knob to scroll through a list of
audio sources, highlight the one you want, and push again. You can also
choose and modify pan, balance and backfeed settings. Adjust source
gain. Correct phase errors. Toggle between stereo and summed input
modes. The bottom of the OLED displays context-sensitive options such as
the ability to Talkback to the selected source, or to momentarily mute the
Operator’s mic. There are no external monitors to clutter up your studio —
all the information your operators need is right below their fingertips.
| Radius AoIP Console | See AxiaAudio.com/radius/ for more details.
RADIUS AoIP CONSOLE | 3
The Radius System (Cont.)
Bus Masters:
On the left, you see one of Radius’ three big, bright LED bargraph
meters. We made them that way to be sure jocks’ attention stays fixed
on the job at hand — namely, riding gain. Both VU and PPM metering
styles are built-in; simply choose the one you wish to use by clicking
the appropriate option in the Radius Setup web page (any browser on
a PC connected to your QOR.16 will do).
Radius has two dedicated meters for Program 1 and Program 2; the
third is a “soft” meter that you can switch to meter Program 3, Program
4 / Phone / Record, or Monitor at the touch of a button.
Why meter the Monitor? In addition to speed keys that select direct
monitoring of all four Program buses, Radius has two EXT monitor keys
(see left). You can assign any source to these keys, either on-the-fly or
pre-loaded in a Show Profile. So when you need to check the level of
an incoming remote line, phone interview, or that iPod the morning
guy brought in, all you have to do is quickly assign it to an EXT Monitor
key, make it active and meter the results.
On the right, the time of day (NTP slavable) and the event timer (auto
reset or manual) are shown. They’re big and bright, too.
Fader Channels:
Monitor Section:
Radius has a friendly,
easy-to-operate interface
that virtually erases the
operator learning curve.
Options knob gives fast
access to source selection,
pan & balance, and other
frequently-used controls.
High-resolution OLED (Organic Light-Emitting Diode)
displays show source name
and status information;
context-sensitive Soft key
changes function to match
the selected audio source.
Premium components
include smooth 100mm.
conductive-plastic faders,
LED button lighting and
long-life rotary encoders.
Radius has features
you’d expect to find in
consoles costing twice as
much. For instance, Talkback — board-ops can
talk to in-studio guests,
remote codecs or Phone
callers using the Talk To
Backfeeds function. Four
Show Profile “snapshots”
recall preset console
configurations instantly.
A Record Mode that
facilitates instant off-air
recording of phone bits
or interviews. Monitor
selection keys for all four
Program buses and two
external sources complete the package.
NoSawzall required:
Radius was designed to sit right on your desktop — no
cutouts to measure and trace or countertops to cut (although
you can make it a drop-in if you like). Since Radius needs no
external monitor, and a single cable connection between the
mixing surface and the QOR.16 engine carries power, logic
and control, a 1” pass-through in your furniture is the only
hole you’ll have to drill.
Vertical Mount:
If you’d like to rack up your Radius for industrial, mobile or
limited-space applications, you can quickly convert it to fit in
a standard 18” rack using the included hardware. Our special
silky-smooth conductive-plastic faders stay where you put
‘em, even in vertical-mount applications.
See AxiaAudio.com/radius/ for more details. | Radius AoIP Console |
4 | RADIUS AoIP Console
The Radius System (Cont.)
No external monitors
needed; easy-to-read
segmented LED meters
are built right in.
Clock and event timer,
right where you expect them.
Quickly record phone bits
or off-air segments using
one-touch Record Mode.
Three stereo mixing buses
plus a stereo utility bus for
plenty of mixing capacity.
Four Show Profile slots let
operators recall frequently
used console snapshots.
Silky-smooth, 100mm.
conductive-plastic faders
for long life and superior
performance.
Monitor section gives board
ops control of control room
and studio monitor sources
and volume.
LED button lighting
means no bulbs to
burn out or replace.
Machined aluminum construction is tough enough to
stand up under 24/7/365 use.
High-resolution OLED displays
show source assignments, pan
and balance information, Soft
Key actions and more.
Simple Setup
Axia FilmCap
Switch Panel
To Production Room
Telos Zephyr Xstream
100BASE-T
1000BASE-T
GPIO
NETWORK FEED
CONTROL
MONITORS
HOST
GUEST
QOR.16 engine
LIVEWIRE-ENABLED
SATELLITE RECEIVER
Axia Radius mixing console
STUDIO
MONITORS
CD PLAYER
CD PLAYER
Telos Z/IP ONE
IP Codec
Guest Position
Mic Control Panels
AUDIO DELIVERY PC
Easy standaloneinstallation. Scalablestudionetworking.
Radius is powered by the latest Axia technology — the QOR.16 engine. It’s much more than just a simple power supply: the
QOR.16 is a self-contained, integrated console engine. Its rock-solid, EM-tight chassis houses an ultra-reliable DSP mixing platform
(not a common PC motherboard) and a hardened power supply designed for unfailing service. In addition, the QOR.16 contains
enough audio and logic I/O for an average studio: mic inputs with switchable Phantom power, analog ins and outs, a pair of AES/
EBU inputs and outputs, and four GPIO ports for machine logic control of your studio devices. (Of course, if you need more I/O, it’s
yours — just connect Axia Audio Nodes to expand your ins and outs).
| Radius AoIP Console | See AxiaAudio.com/radius/ for more details.
RADIUS AoIP CONSOLE | 5
Simple Setup (Cont.)
But that’s not all. Radius is perfect for standalone studios, but it’s from Axia — so naturally, it networks. Inside the QOR.16 is a builtfor-broadcast, zero-configuration Ethernet switch, so you can plug in Livewire network devices like phone systems, remote codecs,
audio processors, playout systems, satellite receivers and more. One CAT-5 connection provides the pathway for all required audio
and control data. There are two Gigabit ports too, so you can connect to other studios if you want. Simple Networking lets you
daisy-chain up to four QORs without the need for an external Ethernet switch. And of course, QOR.16 is fan-free, so you can mount
it in your studio without fear of any sort of ambient noise.
Features at a glance
hh 8 faders, each with instant access to any source. Assign any type of source to any channel with a simple twist of the Options knob.
hh Four main stereo outputs (Program-1 through Program-4).
hh Built-in EQ for “sweetening” of microphone sources.
hh Alpha-numeric OLED displays below each fader always show the current audio source, and, when the Options knob is pressed, offer fast
adjustment of fader gain trim, voice EQ, pan and balance, phase correction and other features without panel clutter or intimidating controls.
Channel-input confidence meters assure talent of audio presence.
hh Each channel is equipped with a context-sensitive Soft key which can be used to activate talkback or other special functions.
hh Every channel has a stereo Preview (“cue”) function, with a unique interlock system for fast cuing of multiple sources.
hh Smooth, long-life 100mm. conductive-plastic are of side-loading design to protect against dirt and contaminant entry.
hh Reconfigurable CR monitor section with direct-selection of Program buses and reassignable buttons that allow monitoring of external
sources.
hh An additional monitor section provides monitor volume, source selection and Talkback controls for an associated air studio.
hh Flexible talkback system lets board op talk to studio guests or any Phone or Codec source with an associated backfeed.
hh Up to 8 automatic mix-minuses may be used simultaneously for phones, remote talent, etc.
hh A unique Record Mode enables one-button setup of record mixes for phone bits or off-air interviews.
hh Bright, readable bar-graph displays provide responsive, readable VU or PPM metering styles. Switchable displays allow metering any Program
bus or Monitor selection.
hh Meter-bridge display includes a precision event timer that may be operated manually or triggered by starting pre-selected sources, and a
time-of-day clock that can be synchronized to network time using NTP.
hh Four custom Show Profile “snapshots” can be saved to instantly recall frequently-used console setups – useful to quickly prepare for
interview segments, music-intensive programming, call-in talk shows, etc.
hh All functions can be accessed remotely for configuration, management and diagnostic purposes using any standard Web browser.
hh Radius surface is field-convertible to rack-mounted operation. Special faders provide smooth operation, yet hold their positions in vertical
orientation.
hh Easy-to-deploy QOR.16 integrated console engine includes console CPU and power supply, DSP mixing engine, custom Ethernet switch with
6 Livewire ports and 2 Gigabit ports for studio networking, 8 analog inputs and 4 analog outputs, 1 AES input and 1 AES output, 2 Mic inputs
with switchable Phantom power, and 4 GPIO ports for machine control. I/O can be expanded using Axia Audio Nodes.
hh Fan-free, convection-cooled power supply for noiseless in-studio operation.
hh Network gateway enables loading up to 8 sources from the Axia network while exporting up to 8 outputs to the network, simultaneously.
hh Proven surface-and-core architecture separates control from mixing processes. No audio passes directly through Radius; all mixing and
processing is performed in the QOR.16 Integrated Console Engine – so studio “accidents” don’t turn into off-air events.
See AxiaAudio.com/radius/ for more details. | Radius AoIP Console |
6 | RADIUS AoIP Console
FAQs
Howmany faders cana Radius have?
Radius has 8 faders. If you need more faders, consider its “big brother”,iQ, which can have up to 24 faders.
I seethat Radius connects toa“consoleengine”withaudioI/Obuilt in. What if I needmoreinputs or outputs than
what’s provided? CanI addmore?
Sure! The QOR.16 console engine comes with enough analog , mic-level and AES/EBU I/O to power a well-equipped small studio. But if you
need more, you can plug in Axia audio nodes. They connect with just a single Ethernet cable.
Ethernet? I havea small studio. Why doI needa fancy network?
Radius was designed as an easy-to-install console for small studios. That’s why we put a power supply, CPU, DSP mixing engine, audio I/O, GPIO
and Livewire inputs into a single integrated console engine – the QOR.16. So Radius is perfect for standalone studios. But, like all Axia gear, it
networks, too. So if your studios expand, you can make your Radius a part of a larger studio network.
HowmuchI/Odoes Radius’ consoleenginehave?
QOR.16 comes with 8 Analog inputs, 1 AES/EBU input, 2 Mic inputs with selectable Phantom power, 4 Analog outputs and 1 AES/EBU output.
There are also 4 GPIO ports and 6 Ethernet ports for connection of Livewire-enabled audio devices.
Areyousurethat’s enoughI/Ofor anon-air studio?
Clients have been telling us that the growing number of Livewire-ready devices helps shrink the need for conventional I/O. For instance, more
than 30 Livewire partners are now making profanity delay units, satellite receivers, high-end audio cards and content delivery systems that
integrate with Axia networks using an Ethernet cable to transport all audio, logic and messaging. To see a list of Axia partners, visit
www.AxiaAudio.com/partners/ .
What if I needmoreI/Othanis built-intotheQOR.16?
No problem; it’s easy to expand your I/O by adding an Axia audio node. In fact, you can connect as many as 6 Livewire devices to any QOR.16.
Even your playout or production PCs that use the Livewire Audio Driver can plug into the Ethernet ports on the back of each QOR.16.
OK, what if I want toconnect twoRadius consoles together? DoI needanEthernet switch?
Not necessarily. There’s an Ethernet switch with Simple Networking built into the QOR.16 engine, so you can daisy-chain up to four consoles
without the need for an external switch. If your network grows bigger than four consoles, you will need a switch – just ask us and we’ll help you
select one that’s right for your facility’s needs.
Wehavesomestudios built withother Axia consoles. Will Radius work withthem?
Absolutely! Radius plugs right into existing Axia networks, and other Axia gear connects to and works seamlessly with Radius. All Axia products
use standard switched Ethernet for audio and logic transport. This guarantees that our future products will always work perfectly with even the
earliest Axia equipment.
Someonetoldmethat Radius can’t loadvery many networkedinputs. Is that true?
Actually, the gateway inside the QOR.16 lets you load as many as 8 audio sources from the network, i.e., sources located outside your studio. You
can also simultaneously share up to four sources for use in other studios. Radius is a self-contained, standalone console. But, because it’s made
by Axia, it networks, too! If 8 networked sources are too few for your needs, consider our Element 2.0 console – it can load up to 80 networked
sources at a time.
| Radius AoIP Console | See AxiaAudio.com/radius/ for more details.
RADIUS AoIP CONSOLE | 7
FAQs (Cont.)
CanI loadany audiosourcetoany fader?What about networkedsources?
Yes, you can. Any source plugged into the QOR.16 engine, or any source available on the Livewire network, can be assigned to any fader
on the console.
Does logicfollowaudio?WhenI loada sourcetoa fader, dotheON/OFFbuttons control that source?
Yes! In a Livewire system, logic and audio are always routed together. Radius has GPIO ports for machine control of four standard audio devices.
If you’re using a Livewire device, audio and control travel over the same Ethernet cable, so no additional logic connections are needed.
Does Radius havea redundant power supply option?
Radius is designed for smaller studios, with cost-efficiency in mind, so no power backup is available. If redundant power is necessary for you,
consider an iQ or Element console, both of which have available backup power.
I heardRadius is madeinChina. Why?
Some console companies seem to think that they can only build an inexpensive console by taking out features until they hit a price point.
Our philosophy is just the opposite: to see how many capabilities we can pack into a console, and still keep the price low. To do this, Radius is
fabricated in China, in an ISO-9002 facility just like those used to build iPads, Droids, 3D LED TVs, and other high-tech electronics.
But youusedcheaper components, right?
No! We understand that your console is the critical link in your studio. So we use only premium components throughout, like high-resolution
OLED displays, aircraft-quality switches and buttons, 100mm. conductive-plastic faders with side-loading design to keep dirt and grunge out,
high-quality mechanical rotary controls and LED lighting under every switch.
What about construction?Your competitionsays Radius looks“plasticky.”
Like all Axia consoles, Radius is made of RF-proof steel and machined aluminum. As with all broadcast mixers (even those made by our competitor!), Radius has some plastic parts – the molded end bumpers, for example, and the clear meter overlay, and of course the fader knobs and
channel switches. But unlike those consoles, Radius’ mixing surface is made of machined, anodized aluminum with laser-etched markings. That
means there’s no plastic overlay to crack, curl or peel, and no paint markings to rub off, ever.
Yousay that Radius is a“standaloneconsolethat networks.”What does that mean?
Radius’ integrated console engine, the QOR.16, was designed after listening carefully to clients who asked for an easy way to set up one or two
independent studios. It combines audio I/O, machine logic, mix engine, console CPU, Ethernet switch and power supply into one fan-free box.
This dramatically cuts setup time, since there’s only one piece of equipment to configure. Consequently, you can use Radius to quickly build a
self-contained studio that operates all by itself.
Of course, if you want to connect your Radius to an IP-Audio network, you can, with one easy Ethernet connection.
Someof QOR.16’s Ethernet ports havePoE. Why?
Many new Ethernet devices use PoE (Power over Ethernet) to eliminate wall-warts or ride-along power supplies. Some of the newest Telos
phone gear, like the VX broadcast VoIP system, use PoE to power the VSet telephones that work with the system. Axia anticipates that a lot of
future, connected, broadcast gear will use PoE as well.
See AxiaAudio.com/radius/ for more details. | Radius AoIP Console |
8 | RADIUS AoIP Console
Radius Specifications
Like all Axia products, Radius uses only premium, studio-grade
audio components to guarantee maximum fidelity.
Total HarmonicDistortion+ Noise
hh Source Impedance: 150 ohms
hh Input Impedance: 4 k ohms minimum, balanced
hh Nominal Level Range: Adjustable, -75 dBu to -20 dBu
hh Input Headroom: >20 dB above nominal input
hh Output Level: +4 dBu, nominal
hh Mic Pre Input to Analog Line Output: <0.005%, 1 kHz, -38 dBu
input, +18 dBu output
hh Analog Input to Analog Output: <0.008%, 1 kHz, +18 dBu input,
+18 dBu output
hh Digital Input to Digital Output: <0.0003%, 1 kHz, -20 dBFS
hh Digital Input to Analog Output: <0.005%, 1 kHz, -6 dBFS input, +18
dBu output
AnalogLineInputs
Crosstalk Isolation, StereoSeparationandCMRR
MicrophonePreamplifiers
hh Input Impedance: 20 k Ohms
hh Nominal Level Range: Selectable, +4 dBu or -10dBv
hh Input Headroom: 20 dB above nominal input
AnalogLineOutputs
hh Output Source Impedance: <50 ohms balanced
hh Output Load Impedance: 600 ohms, minimum
hh Nominal Output Level: +4 dBu
hh Maximum Output Level: +24 dBu
Digital AudioInputs andOutputs
hh Reference Level: +4 dBu (-20 dB FSD)
hh Impedance: 110 Ohm, balanced (XLR)
hh Signal Format: AES-3 (AES/EBU)
hh AES-3 Input Compliance: 24-bit with selectable sample rate
conversion, 20 kHz to 216kHz input sample rate capable.
hh AES-3 Output Compliance: 24-bit
hh Digital Reference: Internal (network timebase) or external reference 48 kHz, +/- 2 ppm
hh Internal Sampling Rate: 48 kHz
hh Output Sample Rate: 48 kHz
hh A/D Conversions: 24-bit, Delta-Sigma, 256x oversampling
hh D/A Conversions: 24-bit, Delta-Sigma, 256x oversampling
hh Latency <3 ms, mic in to monitor out, including network and
processor loop
hh Analog Line channel to channel isolation: 90 dB isolation
minimum, 20 Hz to 20 kH
hh Microphone channel to channel isolation: 80 dB isolation
minimum, 20 Hz to 20 kHz
hh Analog Line Stereo separation: 85 dB isolation minimum, 20Hz to
20 kHz
hh Analog Line Input CMRR: >60 dB, 20 Hz to 20 kHz
hh Microphone Input CMRR: >55 dB, 20 Hz to 20 kHz
Power Supply ACInput, iQCorewithiQConsole
hh Auto-sensing supply, 90VAC to 240VAC, 50 Hz to 60 Hz, IEC
receptacle, internal fuse
hh Power consumption: 300 Watts (Preliminary Estimate)
OperatingTemperatures
hh -10 degrees C to +40 degrees C, <90% humidity, no condensation
Dimensions
hh Radius mixer 20.5” x 19” x 4.5” (desktop to meter bridge)
hh QOR.16 integrated console engine 2.625” x 19” x 15”
Radius AoIP Console (8 faders + monitor controls)
20.45
(519,331)
4.38
(111,175)
Frequency Response
hh Any input to any output: +0.5 / -0.5 dB, 20 Hz to 20 kHz
DynamicRange
hh Analog Input to Analog Output: 102 dB referenced to 0 dBFS, 105
dB “A” weighted to 0 dBFS
hh Analog Input to Digital Output: 105 dB referenced to 0 dBFS
hh Digital Input to Analog Output: 103 dB referenced to 0 dBFS, 106
dB “A” weighted
hh Digital Input to Digital Output: 125 dB
19.01
(482,881)
Equivalent Input Noise
hh Microphone Preamp: -128 dBu, 150 ohm source, reference -50 dBu
input level
| Radius AoIP Console | See AxiaAudio.com/radius/ for more details.
Rev 10/2011
Specifications subject to change without notice
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement