Vertiv Knurr IT-Special Catalogue_CT_UK_EMEA

Vertiv Knurr IT-Special Catalogue_CT_UK_EMEA
VERTIV™ KNÜRR®
SPECIAL CATALOG
Networks & Data Centers
Vertiv™
Vertiv designs, builds and services mission critical technologies that enable the vital applications for
data centers, communication networks, and commercial and industrial environments. We support
today's growing mobile and cloud computing markets with our portfolio of power, thermal, infrastructure
management products, software and solutions, all complemented by our global service network.
Bringing together global reach and local knowledge, and our decades-long heritage including brands
like ASCO®, Chloride®, Liebert®, NetSure™ and Trellis™, our team of experts is ready to take on your
most complex challenges, creating solutions that keep your systems running—and your business
moving. Together, we’re building the future of a world where critical technologies always work.
YOUR VISION, OUR PASSION.
VertivCo.com
2
Table of Contents
Racks
Page
Page
Page
Page
Page
Page
4
8
10
18
20
31
Vertiv™ Knürr® MIR2
Vertiv Knürr MIR2 - Server Rack
Vertiv Knürr MIR2 - Network Rack
Vertiv Knürr MIR2 - IP 55 Rack
Vertiv Knürr DCM®
Vertiv Knürr DCM Colocation Rack
Page
Page
Page
Page
34
50
67
88
Vertiv Knürr Rack Specific Accessories
Vertiv Knürr System Accessories
Vertiv Knürr Cable Management
Vertiv Knürr Fan Units
Page
Page
Page
97
112
119
Vertiv Knürr Smaract®
Vertiv Knürr DoubleProRack®
Vertiv Knürr ConAct®
Page
Page
124
144
Vertiv SmartAisle™ Containment
Switch Tubes™
Page
151
Vertiv Knürr® DCD
Page
Page
Page
Page
Page
158
164
176
186
190
Vertiv Knürr PowerTrans2®
Vertiv MPX™
Vertiv MPH2™
Vertiv MPE
Vertiv Knürr DIS Rack PDU
Page
Page
Page
213
218
224
Vertiv Knürr locking systems
Vertiv Knürr RMS Compact II®
Inline Metering Systeme
Page
Page
Page
Page
230
232
234
236
Glossary
Centers of Expertise
Data Center Infrastructure for Large Applications
Index
Rack Accessories and Components
ACCESSORIE
S
Enclosures
Containment
Cooling
Power Distribution
Security and Monitoring
Vertiv
3
VERTIV™ KNÜRR® MIR2®
4
Vertiv™ Knürr® MIR2®
One system with Infinite Possibilities
Vertiv™ Knürr® MIR®, the classic amongst
innovative racks, is demonstrated by the
long-standing and continuous satisfaction of
our customers.
Drawing on Vertiv's extensive experience
with a wide range of applications, Miracel has
now been adapted for network and server
applications. The innovative Vertiv Knürr
MIR2 has been designed to meet current
requirements in order to ensure that it will
continue to meet customers' needs well into
the future.
For both network and server applications,
the highly versatile Vertiv Knürr MIR2
combines various components and
applications in one place.
Being a modular rack system, it can easily be
expanded at any time and the cable entry
points can be flexibly tailored for specific
needs.
With a load rating of 800 kg, Vertiv Knürr
MIR2 is a cleverly designed space-saving
rack that offers ample space for a wide
range of equipment and, thanks to the
absence of depth members, also present at
the sides, it provides maximum flexibility with
the greatest possible space for cables and
cooling components.
This rack's integrated castors and doors
also make it easy to move without needing to
be tilted.
Made from aluminum, Vertiv Knürr MIR2 is
extremely light, minimizing raised floor
loading and making it easy to transport and
set up. The clever, fully-integrated T-slot
system in the aluminum extrusions also
allows for the free configuration of
accessories and makes it easy to install each
and every component.
5
VERTIV™ KNÜRR® MIR2®
Vertiv™ Knürr® MIR2®
Benefits of an All-in-One Server and Network Rack
Vertiv™ Knürr® MIR2® – Technical Data
Material
– Extruded aluminum.
– Corner piece: die-cast aluminum.
– Casing: galvanized steel sheet.
– Doors: steel sheet.
Installation
dimensions in accordance
with IEC 60297-1 and IEC 60297-2
– Height: 42 HE / 47 HE
(1 HE (or 1U) = 44.45 mm).
– Width: 482.6 mm (19" version).
Available space
– 80 mm jumpering space at the front,
215 mm ranges; customizable up on request.
– Internal hinge: 130° for rack suites:
160° for stand-alone racks.
– External hinge: 180° for stand-alone racks and rack
suites.
Installation options
– Stationary: on levelling feet.
–M
obile: with castor mounting and levelling feet.
6
Finish / Colour
– Basic rack: polished.
–V
isible surface of casing, powder-coated RAL 7021
dark-grey and RAL 7035 light-grey.
Static load rating
– 8000 N (stationary version).
– 4000 N (mobile version).
Tests depending on the design
– Earthing and earth wire test in accordance with DIN
EN 60950.
– Other standards and certificates upon request.
Rack suites
To create a rack suite with "n" racks, you will need:
– 1 x rack without side panels and one rack with
side panels.
– 1 x set of rack connectors per connection.
83% Perforation
offers optimal
airflow
Raised height from
41/46U up to 42/47U
LO
Y
Easy access on all sides
enables comfortable
service and repair
FLO W
S E D H EI G H
T
AI
S
IT
AIR
S Y AC C E S
R
EA
A D C A PA C
Load rate
raised from
500kg up to
800kg
Light weight
aluminium
construction,
minimizes raised
floor loading
CL
BE
IC K YS TE M
Clickystem,
easy mounting
accessories
NE
FIT
S OF A
NA
E
N
O
LL IN
K
C
RA
CA
MO
D ULAR
Modular design makes it
easy to combine with
DCM racks and Smart
Aisle Containment
S TO R S
Castors for
easy transport
7
VERTIV™ KNÜRR® MIR2®
Vertiv™ Knürr® MIR2® – Server Rack – Features
Top cover
with cable entry
rear side
Horizontal extrusion
Depth extrusion
No depth braces required
Vertical extrusion
19" extrusion with
U-marking
Perforated door
biggest possible
perforation
Vertiv Knürr MIR2 – LAN Rack
levelling feet,
castors optional
8
Vertiv™ Knürr® MIR2® – Server Rack
– With fixed 19" mounting on the front and
rear for IEC 297-3-compliant components.
– Perforated single leaf front and rear doors.
–Special 19" server extrusions for mounting all tradestandard 19" servers.
– Components compliant with IEC 297-3.
– Cable entry via base and top cover.
–Cable entry on the top cover, at the rear, can
be completely removed, allowing the top cover to be fitted and removed after cabling.
Load rating
– 8000 N static.
Included in delivery
– 1 x basic rack.
– 4 x 19" steel sheet server extrusions with HE markings.
– 2 x side panels with quick connectors.
– 1 x top cover with cable entry rear(three-piece sliding
plates, can also be fully opened).
– 1 x front door, single leaf, with handle and mounting for
cylinder lock.
– 1 x rear door, single leaf, with handle and mounting for
cylinder lock.
– 1 x complete earthing kit (VDE 0100).
– 4 x levelling feet.
Protection rating
– IP 20.
Delivered
– Assembled.
Tests
– Earthing compliant with VDE 0100 T 540.
– Earthing compliant with DIN EN 60950.
– IP test EN 60529.
Note
For drawers, pull-out shelves and slot-in runners, please
also order the extrusion adapter 01.147.6409.
Jumpering space
– Front: 80 mm.
Vertiv Knürr MIR2 Server Rack
Colour
– x = .1 visible surfaces and covers, RAL 7035 light-grey.
– x = .8 visible surfaces and covers, RAL 7021 dark-grey.
Material / Finish
– Basic rack: extruded aluminum.
– Corner piece: die-cast aluminum, polished.
– Covers: galvanized steel sheet, powder-coated texture.
– Doors: steel sheet, powder-coated texture.
– 19" extrusions, 2.0 mm galvanized steel sheet.
W
H
D
U
h
d
kg
Order No.
Units
600
1969
1000
42
1873
740
84
01.157.007.x-026
1 unit
600
2191
1000
47
2095
740
91
01.157.007.x-036
1 unit
600
1969
1200
42
1873
740
90
01.157.007.x-028
1 unit
600
2191
1200
47
2095
740
98
01.157.007.x-038
1 unit
800
1969
1000
42
1873
740
107
01.157.011.x-026
1 unit
800
2191
1000
47
2095
740
116
01.157.011.x-036
1 unit
800
1969
1200
42
1873
740
111
01.157.011.x-028
1 unit
800
2191
1200
47
2095
740
123
01.157.011.x-038
1 unit
9
VERTIV™ KNÜRR® MIR2®
Vertiv™ Knürr® MIR2® – LAN Rack – Features
Top cover with
cable inlet rear
+ 25 mm raised
Horizontal extrusion
Depth extrusion
No depth braces required
Vertical extrusion
19" extrusion with
U-marking
Glas door
Vertiv Knürr MIR2 – LAN Rack
Stationary plinth
with vents
10
Vertiv™ Knürr® MIR2® – Network Rack
– With fixed 19" mounting on the front and
rear for IEC 297-3-compliant components.
–Installation of slot-in runners, drawers, pull-out shelves
and cable management equipment.
–Cable entry via plinth and top cover.
–Cable entry on the top cover, at the rear;
top cover can be attached / removed after equipment installation.
–Heat is discharged via the raised top cover.
–Door opening angle 160° internal hinges.
Jumpering space
– Front: 123 mm.
Load rating
– 8000 N static .
Protection rating
– IP 20.
Vertiv Knürr MIR2 Netzwerk Schrank
Tests
– Earthing compliant with VDE 0100 T 540.
– IP test EN 60529.
Colour
– x = .1 visible surfaces and covers, RAL 7035 light-grey.
– x = .8 visible surfaces and covers, RAL 7021 dark-grey.
Included in delivery
– 1 basic rack.
– 4 x 19" perforated steel sheet extrusions with HE
markings. Depth 600 2 x 19".
– 2 x side panels with quick connectors.
– 1 x raised top cover with cable entry rear (three-piece
sliding plates, can also be fully opened) at the rear.
– 1 x front door, single leaf, single safety-glass panel,
with handle and mounting for cylinder lock.
– 1 x rear door, single leaf, steel sheet, with handle and
mounting for cylinder lock .
– 1 x plinth with vents at the front and rear, including
closed sides and mounting for filter mat.
– 1 x complete earthing kit (VDE 0100).
– 4 x levelling feet.
Delivered
– Assembled.
Material / Finish
– Basic rack: extruded aluminum.
– Corner piece: die-cast aluminum, polished.
– Casing: galvanized steel sheet, powder-coated texture.
– Doors, steel sheet, powder-coated texture, glass infill
front door, single safety-glass panel, 4 mm.
– 19" extrusions, 1.5 mm galvanized steel sheet.
W
H
D
U
h
kg
Order No.
Units
800
2120
600
42
1873
d
88
01.157.005.x-022
1 unit
800
2340
600
47
2095
96
01.157.005.x-032
1 unit
800
2120
800
42
1873
565
115
01.157.005.x-024
1 unit
800
2340
800
47
2095
565
116
01.157.005.x-034
1 unit
800
2120
1000
42
1873
740
126
01.157.005.x-026
1 unit
800
2340
1000
47
2095
740
138
01.157.005.x-036
1 unit
11
VERTIV™ KNÜRR® MIR2®
Vertiv™ Knürr® MIR2®
Configurator
Vertiv Knürr MIR2 – configured by you
Vertiv Knürr MIR2 is one of our configurable rack platforms.
You can easily select the options you need for your individual rack, based on the matrix.
9
5
6
11
7
11
8
4
13
3
10
Example product number
Dimensions
12
Doors
19" Extrusions
Cover parts
Color
Product
Height
Width
Depth
Front
Door
Rear Door
19" Front
Vertical
Extrusion
19" Rear
Vertical
Extrusion
Top Cover
Plinth
Side Panel
Packaging
N
B
8
E
A
B
S
S
B
A
B
X
Jumpering Free
Depth
Q
X
Color
8
Doors
Option
Matrix
Dimensions
N=
Vertiv™
Knürr®
MIR2®
Rack
2
3
Rack
Height
Rack
Width
B=
42 U
D=
47 U
6=
4
5
Rack
Depth
C=
A=
600 mm 800 mm Glass single
door right
8=
D=
B=
800 mm 900 mm Sheet steel
single door
right
E=
1000
mm
F=
C=
Perforated
single door
D=
1100 mm 180° perforated single
door right
G=
6
Front
Door
E=
Rear
Door
A=
Glass single
door right
B=
7
Sheet steel
double door
G=
Sheet steel
per­forated
double door
H=
180°
perforated
double door
M=
180° sheet
steel single
door right
N=
180° sheet
steel double
door
19" Vertical
Extrusion
Front
Rear
A=
19" vertical
server
extrusion with
air partition
and 3x1 U
cut-outs*
B=
D=
SELECT YOUR OPTIONS
T=
X=
180°
perforated
single door
right
19" vertical
Without 19"
extrusion with extrusions
mounting
holes
E=
S=
F=
Sheet steel
double door
G=
Sheet steel
per­forated
double door
H=
T=
19" Vertical
Extrusion with
T-Slot
X=
Without 19"
extrusions
Top cover with
cable inlet rear
E=
Plinth
A=
Color
11
B=
Both sides
B=
C=
F=
G=
Top cover short Plinth,
stationary
100mm, with
vent slots
S=
Top cover
without cut out
for fan units,
with cable inlet
rear, with spacer
X=
Without top
cover
H=
Plinth,
stationary
200mm, with
vent slots
R=
Mobile casters
X=
Standard
packaging
A=
Color
X
1=
C=
8=
115/740mm*
RAL
7021
D=
D=
X=
L=
Left
R=
123/740mm*
**
200/740mm*
F=
Right
215/740mm*
X=
G=
Without side
panels
blank
E=
150/740mm*
Q=
80/565mm*
T=
150/565mm*
N=
V=
Q=
Free
RAL
7035
180° sheet
steel single
door right
180° sheet
steel double
door
15
80/740mm*
123/565mm*
M=
14
Partitioning
wall fixed
right
Top cover short Without plinth. Partitioning
with lateral
Adjustable feed wall fixed left
cable inlet
only
closed
G=
13
19" vertical
extrusion,
mounting
Side Panel Packaging
position front
and space
between
Plinth,
stationary
100mm, all
sides closed
Plinth,
stationary
200mm, all
sides closed
12
180°
perforated
double door
Q=
X=
C=
19" vertical
19" Vertical
server
Extrusion with
extrusion with T-Slot
cable
management*
H=
B=
S=
C=
10
Top Cover
Top Cover, with
cut out for fan
units, with cable
inlet rear
C=
Perforated
single door
9
19" vertical
extrusion with
mounting
holes
19" vertical
19" vertical
server
server
extrusion with extrusion
air partition
P=
180°glass
double door
H=
Sheet steel
single door
right
P=
180° glass
single door
right
8
19" Vertical
Extrusion
1200 mm Glass double Glass double 19" vertical
door
door
server
extrusion
F=
Cover parts
19" Extrusions
U=
200/565mm*
180° glass
single door
right
180°glass
double door
R=
Without door rear/front
door
X=
Without door
Remarks:
* this options might not be possible with each Rack width, depth and 19" mounting position.
** use "X" if select no cladding parts.
13
VERTIV™ KNÜRR® MIR2®
Vertiv™ Knürr® MIR2®
Configurator – Technical Overview of selectable options
A
B
C
E
F
G
Overview of all mountable parts
Product
14
2
3
4
5
6
Height
Width
Depth
Front
Door
Rear
Door
7
8
19" Vertikal 19" Vertikal
Extrusion
Extrusion
front
rear
9
10
11
12
13
14
15
Top Cover
Plinth
Side
Panel
Packaging
Jumpering
Space
Free
Color
B
C
E
S
C
L
A
R
B
C
E
F
G
R
D
C
H
A
R
A
B
G
H
15
VERTIV™ KNÜRR® MIR2®
Vertiv™ Knürr® MIR2®
Configurator – Technical Overview of selectable dimensions
8
A
13
Pos.2
B=42U
D=47U
A
Pos.13a
Useful depth
4
Pos.13
Jumper Space
Pos.4
A=600mm
C=800mm
D=900mm
E=1000mm
F=1100mm
G=1200mm
Front and rear door not displayed
Pos.8
2
A-A 7
Pos.7
(min. 450)
( 465,1±1.6)
Pos.3
6=600mm
8=800mm
10
Product
16
Pos.10
H=200mm
Pos.10
G=100mm
3
2
3
4
5
6
Height
Width
Depth
Front
Door
Rear
Door
7
8
19" Vertikal 19" Vertikal
Extrusion front Extrusion rear
9
10
11
12
13
Top
Cover
Plinth
Side
Panel
Packaging
Jumpering
Space
14
15
Free Color
17
VERTIV™ KNÜRR® MIR® IP55
Vertiv™ Knürr® MIR® IP 55, on request
With single glass door, width 600 mm
– With fixed 19" component on the front and rear.
– For IEC 297-3-compliant components.
– Door opening angle, 180°.
–For installing 19" components on the front and rear.
–For installation equipment with a max. width of 450 mm.
–Installation accessories.
Jumpering space
– Front 73 mm.
Load rating
– 5000 N static.
Protection rating
– IP 55.
MIR20336
Scope of delivery
– 1 x basic rack.
– 4 x 19" sheet steel angular extrusions with mounting
holes.
– 2 x multifunctional braces for cable clamping and
universal mounting options.
– 1 x top cover, closed, IP 55.
– 1 x front door, single, single safety-glass panel,
with handle and mounting for cylinder lock, IP55.
– 1 x rear panel with quick connectors, IP 55.
– 2 x side panels with quick connectors, IP 55.
– 1 x floor, closed, IP 55.
– 4 x leveling feet (0 - 25 mm).
How supplied
– Mounted.
Tests
– Earthing compliant with VDE 0100 T 540.
– Vibration test compliant with MIL-STD 810 E.
– IP test compliant with DIN 40 050 / IEC 529.
Material / Finish
– Basic rack, extruded aluminum, polished.
–C
orner piece, die-cast aluminum, polished.
– Covers, zinc-passivated sheet steel, powder-coated
texture.
– Doors, sheet steel, powder-coated texture, glass infill,
front door, single safety-glass panel, 4 mm.
– Multifunctional braces and 19" extrusions, sheet steel,
zinc-passivated.
Note on rack suites
To create a rack suite with "n" racks, the following is
required:
– (n-1) racks without side panels.
– 1 rack with side panels.
In a rack suite, per connection you will require a set of
BN 01.130.935.7 suite connectors.
Color
– Visible surface of the covers, RAL 7035 light-grey.
W
H
D
U
h
d
kg
Order No.
UP
600
1800
600
37
1652
440
75
01.132.271.1
1 unit
600
2000
600
41
1852
440
80
01.132.272.1
1 unit
600
1800
800
37
1652
640
83
01.132.277.1
1 unit
600
2000
800
41
1852
640
90
01.132.278.1
1 unit
Accessories for Vertiv Knürr MIR IP55 Rack on request
MIR00301
18
Vertiv™ Knürr® MIR® top
cover Closed, IP55
–Can be optionally used as top cover
or bottom cover (combination with
stationary plinth is not possible with us as
bottom cover).
MIR00070
Protection rating
– Installation in the Vertiv™ Knürr® MIR®
(depending on other rack components),
achieves a maximum protection rating
of IP 55.
Finish
– Powder-coated texture, RAL 7035.
Scope of delivery
– 1 x cover, closed.
– 1 x Mounting kit.
How supplied
– In sets.
W
D
Order No.
UP
600
600
01.130.690.1
1 unit
600
800
01.130.691.1
1 unit
600
900
01.130.692.1
1 unit
600
1000
01.127.700.1
1 unit
600
1200
01.133.760.1
1 unit
800
600
01.130.691.1
1 unit
800
800
01.130.699.1
1 unit
800
900
01.130.700.1
1 unit
800
1000
01.127.702.1
1 unit
800
1200
01.133.762.1
1 unit
Dimensions in mm:
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
UP = Packaging unit
19
VERTIV™ KNÜRR® DCM®
Vertiv™ Knürr® DCM® Rack System
Market-leading Data Center Technologies for your Company
Integrated solutions.
Integrated benefits.
Integrated energy efficiency.
Reliability:
Proven business-critical technologies
that minimize failure sources and
guarantee the greatest possible
reliability for your IT systems.
Everything from one source:
One central provider for the provision,
configuration, installation and support
of your products and technologies.
Integration: From the rack through to
the entire room – our products and
services form one integrated holistic
system.
Technical support: Where required, onsite and factory-site support is
provided by application specialists.
Vertiv has the largest team of
customer service specialists in the
world.
Flexible configuration options: Our
products and technologies deliver
flexibility, adaptability and costeffective solutions.
Energy efficiency: We offer our
customers "Green IT" solutions that set
standards on the ITC market – a datacenter infrastructure that stays abreast
current and future requirements and
facilitates management and
automation of physical infrastructure.
20
Vertiv™ Knürr® provides comprehensive products and services for all requirements –
from compact racks and computer rooms, right through to global data centers.
Based on a variety of data centers' specific requirements, Vertiv has developed a
customized, ready-made solution: rack systems with
integrated thermal management, power supply cooling and monitoring. We also provide
optional services such as on-site expertise and support, thereby
ensuring that you can easily order, configure, manage and implement your Vertiv Knürr
solution.
Cooling Rack
Power Rack
Telecom Rack
Colocation Rack
Server Rack
Network Rack
Cabling Rack
Integrated Racks
Rack Cooling
Rack PDU
KVM Switch
Serial Console
LCD Trays
UPS
Monitoring
21
VERTIV™ KNÜRR® DCM®
22
Vertiv™ Knürr® DCM®
The Modular Rack Platform for a Future-proof Data Center
Everything in the data center begins with the Vertiv™ Knürr® DCM®!
Modular building box: quick, costeffective and sustainable.
Maximum space for power-supply and
cabling components allowing them to
be placed alongside the panels.
The Vertiv Knürr DCM is the modular building block for all "in row" applications of Vertiv’s
products. It’s used as server racks, power racks, or storage racks.
Structural stability with low weight
provided by light aluminum structure
that can be disassembled.
More variability with stepless,
adjustable-depth air containment with
vertical extrusions.
COLD AISLE CONTAINMENT
MODULAR
UPS
Liebert® APM
SERVER RACK
Vertiv Knürr DCM
Vertiv Knürr DCM Colocation
Vertiv SmartAisleTM
AISLE COOLER
Liebert CRV
Positioning of rack in area of application
23
VERTIV™ KNÜRR® DCM®
24
Vertiv™ Knürr® DCM®
Application-optimized Server-Rack Solution – The Keystone for your IT Solutions
Height
2200 mm / 47 U
2000 mm / 42 U
The right rack size
for every application
Vertiv™ Knürr® Data Center Module
The
Vertiv Knürr DCM® is Vertiv's
globally available rack for world-wide,
standardized data center planning.
Global standard
T
he 2000 mm height and 1100 mm
depth rack version is the global
platform for rack suites at Vertiv.
Cooling racks, power racks and server
racks based on the Knürr DCM
platform guarantee easy integration
into the rack suite.
Metric measurements
for global use.
Stable and secure
Vertiv Knürr DCM seismic-tested
version available up on request. Static
load of up to 1500 kg. Flexible use as a
server or active network rack.
Width
600 mm
800 mm
1000 mm
1100 mm
1200 mm
Depth
25
VERTIV™ KNÜRR® DCM®
Vertiv™ Knürr® DCM®
Features
High-load cabinet
Static load of 1500 kg featuring a new design, more
stable profiles and new high-load corner joints. (1)
Screw design
Since the rack can easily be dismantled, even to the
most restricted areas are accessible. (2)
Light aluminum frame
Lower weight allows for easier, lighter transportation. (3)
Convenient
Tool-free door assembly. (4)
1. DCM20059
Low, heavy-duty casters
Even fully equipped rack can be moved safely and conveniently. (5)
Cable management
Guaranteed orderly and space-saving cable
management. Adaptable to site installation
requirements: cable management can be selected from
an extensive range of accessory components. (6)
Largest possible perforation
For improved airflow. (7)
Maximum space
PDUs and cable management can also be housed in the
space between the 19" level and the side panel.
Adjustable-depth air separation
Cold/warm air is sealed alongside the panels, permitting
adjustment of the depth. The standard air-containment
accessory (with 1 U slot) can be used to increase the
usable space of your server rack up to 6 U. (8)
Integrated tilt restraint
Quick and easy installation and disassembly.
3. DCM20030
26
2. DCM20008
4. DCM20006
5. DCM20028
6. DCM20027
7. MIR20265
8. DCM20000
Vertiv™ Knürr® DCM®
Technical data
M
aterial
– Extruded aluminum.
– Corner piece, die-cast aluminum.
–C
overs, steel sheet, zinc-passivated.
– Steel sheet doors.
Finish/Color
– Basic rack, polished.
– Visible surface of covers RAL 7021 dark-grey.
Static load rating
– 15000 N (stationary model).
– 10000 N (mobile model).
Installation dimensions compliant with
IEC 60297-1 and IEC 60297-2
–H
eight: 42 U / 47 U (1 U) = 44.45 mm).
– Width: 482.6 mm (19" construction).
Tests depending on design
– IP test compliant with IEC 60529.
– Earthing and protective conductor test compliant
with DIN EN 60950.
80
Available space
– Jumpering space, 80 mm.
– 1 30° door opening angle in the rack suite and 180°
as individual rack.
Further standards and tests may be provided upon on
request.
Configurations
– Stationary on leveling feet.
–M
obile with caster mounting and leveling feet.
Rack suites
To create a rack suite with "n" racks, the following is
required:
– n-1 racks without side panels and 1 rack with side
panels.
– In a rack suite, per connection you one set of rack
connectors.
DCM20066
Dimensions in mm:
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
Nom. dimension
W
W1
W2
D
D1
D2
W 600 / D 1000
591
535
485
986
856
885
W 600 / D 1100
591
535
485
1086
956
985
W 600 / D 1200
591
535
485
1186
1056
1085
W 800 / D 1000
791
735
685
986
856
885
W 800 / D 1100
791
735
685
1086
956
985
W 800 / D 1200
791
735
685
1186
1056
1085
Nom. height
H
h
H 2000
1983
1872
H 2200
2205
2095
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
UP = Packaging unit
27
VERTIV™ KNÜRR® DCM®
Vertiv™ Knürr® DCM®
1
Configurator
Up to 2.5 million different assembly options
9
5
6
11
2
7
11
8
4
3
10
28
Vertiv™ Knürr® DCM® – configured by you
Impressive number of variations:
There are now up to 2.5 million options for a
configuration with the 'Configurable Article
Number' (which replaces the old order
numbers).
A system building box that significantly
simplifies your combinations.
Definite identification is also possible with a
repeat order or upgrade.
This 'Configurable Article Number'
reproduces all requested properties via
multiple choice (see chart below), without
requiring detailed rack descriptions.
The 'Configurable Article Number' makes a
significant contribution to simplifying the
selection and ordering process.
Product line
Vertiv Knürr DCM
Doors
Dimensions
2
1
Rack
Height
B=
D=
42 U
Vertiv
Knürr
DCM Rack
D=
47 U
3
Rack
Width
6=
4
Rack
Depth
E=
600 mm 1000
mm
8=
5
F=
A=
Single
glass door
B=
800 mm 1100 mm Single steel
sheet door
G=
1200
mm
6
Front
Door
C=
Perforated
single door
G=
Per­forated
double door
X=
Covers
19" Extrusions
Rear
Door
7
8
19"-Front
Vertical
Extrusion
19"-Rear
Vertical
Extrusion
A=
A=
Single glass
door
S=
19" vertical
19" vertical
server
server
extrusion with extrusion
air
containment
and 3x1 U
cut-outs*
B=
B=
X=
Single steel
sheet door
19" vertical
Without 19"
server
extrusions
extrusion with
air
containment
C=
C=
Perforated
single door
Perforated
double door
10
Cover
C=
Top cover with
cable entry
E=
Cover with
lateral cable
entry
G=
19" Server
extrusion with
vertical
cablemanger*
Cover short
Plinth
A=
11
12
19" vertical
extrusion,
mounting
Side Panel Packaging
position front
and space
between
B=
Both sides
B=
L=
R=
With casters
A=
X=
Fixed plinth,
100 mm
Fixed plinth,
200 mm
13
Standard
packaging
14
15
Free
Color
X
80/740mm
B=
1=
RAL
7035
8=
Left
85/740 mm
RAL
7021
R=
C=
X=
Right
without
color
115/740 mm
**
S=
G=
9
Color
Packaging
X=
19" vertical
server
extrusion
Without cover
F=
X=
D=
Without
Fixed without
plinth. Only feet
are
height-adjustable
123/740 mm
E=
R=
Without door Back cover
200/740 mm*
F=
X=
Without door
215/740 mm*
G=
Configuration example:
150/740 mm
Product
Height
Width
Depth
Front Door
Rear Door
19"Front
Vertical
Extrusion
19"Rear
Vertical
Extrusion
Cover
Plinth
D
B
8
F
G
X
A
X
C
B
Side Panel Packaging
L
X
19" extrusion
inseration
Free Color
depth
X
X
8
Remarks:
* this options might not be possible with each Rack width, depth and 19" mounting position.
** "X" if select no cladding parts.
Example product number
29
VERTIV™ KNÜRR® DCM®
Vertiv™ Knürr® DCM® 19" Heavy Duty Server Rack
Width 600 and 800, Stationary and Mobile
DCM20003
stationary DCM20022
mobile
– Perforated front door.
– Perforated rear double door.
–Special 19" server extrusions for mounting all off-theshelf 19" servers.
– Components compliant with IEC 297-3.
– Cable entry via top and bottom cover.
–Cable entry on the top cover can be completely
removed at the rear allowing installing and removal of
top cover after cabling.
–Mobile design includes heavy-duty casters with ample
floor clearance.
Jumpering space
– Front 80 mm.
Load rating
– 15000 N static.
– 10000 N mobile in data center with load.
Protection rating
– IP 20.
DCM20063
Scope of delivery
– 1 x basic rack.
– 4 x 19" server extrusions, steel sheet inclusive U
marking.
– 2 x side panels with quick connectors.
– 1 x top cover with cable entry (three-piece sliding
plates can also be opened completely).
– 1 x front door, single, perforated, with handle and
mounting for cylinder lock.
– 1 x rear door, double, perforated, steel sheet, with
handle and mounting for cylinder lock.
– 4 x leveling feet.
– 1 x complete earthing test (VDE 0100).
– Mobile design: additionally 2 caster mountings with
heavy-duty casters and integrated cable entry.
How supplied
–M
ounted.
Tests
– Earth compliant with DIN EN 60950.
–M
obile design: Earthing compliant with VDE 0100 T
540.
– IP test compliant with DIN 40 050 / IEC 529.
Average width 800 mm, stationary
Color
– Visible surfaces and covers coated with RAL 7021,
dark-grey.
Note
Order mounting adapters for 19" server extrusion for
mounting Knürr accessories are also available.
Airflow circulation
– Perforation: 83 %.
DCM20062
DCM20065
DCM20064
30
Material / Finish
– B asic rack, extruded aluminum, polished.
– Corner piece, die-cast aluminum, polished.
– Doors, steel sheet, powder-coated texture.
–C
overs, zinc-passivated steel sheet, powder-coated
texture.
– 1 9" extrusions, 2.0 mm zinc-passivated steel sheet.
Average width 600 mm, stationary
Average width 800 mm, mobile
Average width 600 mm, mobile
W
H
D
U
d
kg
Model
Order No.
UP
600
2000
1200
42
740
117
Stationary with side panels
DB6GCGSSCFBXXX8
1 unit
600
2200
1200
47
740
121
Stationary with side panels
DD6GCGSSCFBXXX8
1 unit
800
2000
1200
42
740
132
Stationary with side panels
DB8GCGSSCFBXXX8
1 unit
800
2200
1200
47
740
136
Stationary with side panels
DD8GCGSSCFBXXX8
1 unit
600
2000
1200
42
740
75
Stationary, no side panels
DB6GCGSSCFXXXX8
1 unit
600
2200
1200
47
740
81
Stationary, no side panels
DD6GCGSSCFXXXX8
1 unit
800
2000
1200
42
740
92
Stationary, no side panels
DB8GCGSSCFXXXX8
1 unit
800
2200
1200
47
740
94
Stationary, no side panels
DD8GCGSSCFXXXX8
1 unit
600
2000
1200
42
740
127
Mobile with side panels
DB6GCGSSCRBXXX8
1 unit
800
2200
1200
47
740
146
Mobile with side panels
DD8GCGSSCRBXXX8
1 unit
600
2000
1200
42
740
85
Mobile, no side panels
DB6GCGSSCRXXXX8
1 unit
800
2200
1200
47
740
104
Mobile, no side panels
DD8GCGSSCRXXXX8
1 unit
COLOCATION RACK
Vertiv™ Knürr® DCM® Colocation Rack
Width 800 mm
DCM20085
–Perforated front doors with one-point lock.
–Perforated rear doors with one-point lock.
–Special 19" server extrusions for mounting all off-theshelf 19" servers.
–Components compliant with IEC 297-3.
–Standard cable entry with fixed cable duct on the
right.
–Optional cable entry left and right via cover and shelf
by reconfiguration of the cable ducts.
–Secure partitioning of the individual bays using
securely mounted partition shelves.
–With lateral air containment at the front left and right,
each with 1 U opening for mounting different
components.
–Doors with handle and mounting for cylinder lock.
–Adjustment of the 19" extrusions in 50 mm increments.
Jumpering space
– Front 80 mm.
Load rating
– 25 kg per rack unit (stationary).
– e . g.: 15 U x 25 kg = 375 kg load for one bay.
Scope of delivery
– 1 x basic rack.
– 4 x 19" server extrusions with regular perforations,
steel sheet with rack unit marking for each bay.
– 1 x top cover, including cable-inlet covers on the left
and right sides.
– 1 x shelf, including cable-inlet cover on the right;
open on the left for cable duct = cable entry.
– 2 x partitioning shelves for 3-way colocation.
– 1 x partitioning shelf for 2-way colocation.
– 3 x perforated front and rear doors for 3-way
colocation.
– 2 x perforated front and rear doors for 2-way
colocation.
– Air containment at the front with covered 1 U cutout.
How supplied
– Mounted.
Protection rating
– IP 20.
DCM20086
Color
– Visible cover surface
Final digit of Order No. .1: RAL 7035 light-grey.
Final digit of Order No. .8: RAL 7021 dark-grey.
Note
– Also order mounting adapters for 19" server
extrusion for mounting Knürr accessories.
– Side partitioning walls must be ordered separately.
– Cylinder locks must be ordered separately .
– Stationary plinth can be mounted afterwards.
Tests
– Earthing compliant with VDE 0100 T 450.
– IP test compliant with DIN 40 050 / IEC 529.
Airflow circulation
– Perforation: 83 %.
Material / Finish
– Basic
rack, extruded aluminum, polished.
– Corner piece, die-cast aluminum, polished.
– Doors, steel sheet, powder-coated texture.
– Partitioning walls, zinc-passivated steel sheet.
– 1 9" extrusions, 2.0 mm zinc-passivated steel sheet.
– Shelf supports, zinc-passivated.
DCM20087
DCM20088
W
H
D
U
d
kg
Model
Order No.
UP
800
2000
1100
13
740
136
3-way colocation without side panels
01.143.000.X-001
1 unit
800
2000
1200
13
740
142
3-way colocation without side panels
01.143.000.X-002
1 unit
800
2200
1100
15
740
145
3-way colocation without side panels
01.143.000.X-003
1 unit
800
2200
1200
15
740
150
3-way colocation without side panels
01.143.000.X-004
1 unit
800
2000
1100
20
740
95
2-way colocation without side panels
01.143.001.X-001
1 unit
800
2000
1200
20
740
122
2-way colocation without side panels
01.143.001.X-002
1 unit
800
2200
1100
23
740
125
2-way colocation without side panels
01.143.001.X-003
1 unit
800
2200
1200
23
740
123
2-way colocation without side panels
01.143.001.X-004
1 unit
800
2000
1100
13
740
175
3-way colocation with side panels
01.143.002.X-001
1 unit
800
2000
1200
13
740
184
3-way colocation with side panels
01.143.002.X-002
1 unit
800
2200
1100
15
740
178
3-way colocation with side panels
01.143.002.X-003
1 unit
800
2200
1200
15
740
194
3-way colocation with side panels
01.143.002.X-004
1 unit
800
2000
1100
20
740
155
2-way colocation with side panels
01.143.003.X-001
1 unit
800
2000
1200
20
740
164
2-way colocation with side panels
01.143.003.X-002
1 unit
800
2200
1100
23
740
165
2-way colocation with side panels
01.143.003.X-003
1 unit
800
2200
1200
23
740
170
2-way colocation with side panels
01.143.003.X-004
1 unit
31
VERTIV™ KNÜRR® DCM® COLOCATION RACK ACCESSORIES
Partitioning Wall
for Retrofitting
Cable Duct
for Retrofitting
–Secure cabling for data and power-supply lines.
–Subsequent installation in 2- or 3-way
colocation.
–Cable duct can be rebuilt at any time.
–To secure the partitions between the
individual
bays against unauthorized access.
–Each bay can be closed off separately after initial
installation.
–The partitioning wall is inserted above and below on
mounting strips provided for this purpose.
–The partitioning wall is screwed into place at the
front and covered by the door.
DCM20110
Material
– Order
no.1: Powder-coated RAL 7035, light-grey
texture.
–O
rder no.8: Powder-coated RAL 7021, dark-grey
texture.
Material
– Steel sheet 1.0 mm.
Finish / Color
– Zinc-passivated steel sheet.
DCM20099
Scope of delivery
– 1 x cable duct for retrofitting.
– 1 x Covers.
– 1 x Mounting kit.
Finish / Color
– Zinc-passivated steel sheet.
How supplied
– In sets.
Scope of delivery
– 1 x partitioning wall for retrofitting.
– 1 x Mounting kit.
How supplied
– In sets.
DCM20109
Note
Partitioning wall can be installed from every position
(top, middle, bottom, left and right).
DCM20100
H
D
Model
Order No.
UP
H
Model
Order No.
UP
2000
1100
For 3-way colocation
01.143.100.X-001
1 unit
2000
Short, for 3-way colocation
01.143.101.0-001
1 unit
2000
1200
For 3-way colocation
01.143.100.X-002
1 unit
2000
Long, for 3-way colocation
01.143.101.0-002
1 unit
2200
1100
For 3-way colocation
01.143.100.X-003
1 unit
2200
Short, for 3-way colocation
01.143.101.0-003
1 unit
2200
1200
For 3-way colocation
01.143.100.X-004
1 unit
2200
Long, for 3-way colocation
01.143.101.0-004
1 unit
2000
1100
For 2-way colocation
01.143.100.X-005
1 unit
2000
For 2-way colocation
01.143.101.0-005
1 unit
2000
1200
For 2-way colocation
01.143.100.X-006
1 unit
2200
For 2-way colocation
01.143.101.0-006
1 unit
2200
1100
For 2-way colocation
01.143.100.X-007
1 unit
2200
1200
For 2-way colocation
01.143.100.X-008
1 unit
3-point Locking
Upgrade Kit
–Upgrade kit for conversion
to 3-point locking.
–Additional security.
–Can be upgraded at any time.
–Suitable for heights of 2000 and 2200 mm.
Scope of delivery
– 1 x Rod for locking unit.
– 1 x Rod guide.
DCM20111
How supplied
– In sets.
H
Model
Order No.
UP
2000, 2200
for 3-way colocation
01.143.102.7-001
1 unit
2000, 2200
for 2-way colocation
01.143.102.7-002
1 unit
Dimensions in mm:
32
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
UP = Packaging unit
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
VERTIV™ KNÜRR® MIR2® / VERTIV KNÜRR DCM®
ACCESS
S
E
I
OR
33
VERTIV™ KNÜRR® MIR2® / VERTIV KNÜRR DCM®
RACK SPECIFIC ACCESSORIES
Doors
Material
– Steel sheet: 1.0 mm.
Included in delivery
– 1 x door, single, double leaf or rear panel.
– Mounting kit.
Colour
– digit X of order number .1: RAL 7035 light-grey.
– digit X of order number .8: RAL 7021 dark-grey.
Image
Description
Steel sheet door
with perforation,
single leaf
Steel sheet door
with perforation,
double leaf
Note
Perforated doors (83 % free surface) allow for optimum
airflow throughout the rack..
Delivered
– Pre-assembled.
Version
Dimensions
H 2000 mm
Dimensions
H 2200 mm
W 600 mm
W 800 mm
W 600 mm
W 800 mm
160° opening angle,
interal hinges
01.147.803.X
01.147.805.X
01.147.806.X
01.147.808.X
180° opening angle,
external hinges
01.157.092.X-007
01.157.092.X-009
01.157.092.X-010
01.157.092.X-012
160° opening angle,
interal hinges
01.147.921.X
01.147.929.X
01.147.922.X
01.147.930.X
180° opening angle,
external hinges
01.157.093.X-007
01.157.093.X-009
01.157.093.X-010
01.157.093.X-012
160° opening angle,
interal hinges
01.147.534.X
01.147.536.X
01.147.537.X
01.147.539.X
180° opening angle,
external hinges
01.157.094.X-007
01.157.094.X-009
01.157.094.X-010
01.157.094.X-012
160° opening angle,
interal hinges
01.147.570.X-002
01.147.570.X-010
01.147.570.X-003
01.147.570.X-011
180° opening angle,
external hinges
01.157.095.X-007
01.157.095.X-009
01.157.095.X-010
01.157.095.X-012
160° opening angle,
interal hinges
01.147.540.X
01.147.542.X
01.147.543.X
01.147.545.X
180° opening angle,
external hinges
01.157.090.X-007
01.157.090.X-009
01.157.090.X-010
01.157.090.X-012
160° opening angle,
interal hinges
01.147.571.X-002
01.147.571.X-010
01.147.571.X-003
01.147.571.X-011
180° opening angle,
external hinges
01.157.091.X-007
01.157.091.X-009
01.157.091.X-010
01.157.091.X-012
01.157.080.X-003
01.157.080.X-004
01.157.080.X-005
01.157.080.X-006
Steel sheet door without
perforation, single leaf
Steel sheet door without
perforation, double leaf
Glass door, single leaf
Glass door, double leaf
Rear panel
34
Top Cover
Material
– Steel, 1.5 mm.
Image
Description
Top cover with lateral
cable inlet
Top cover with rear cable
entry
01.157.050.X-007
Top cover with cut out for
fan units and cable inlet rear.
Cut out closed with screwed
blanking panel.
Top cover with cably inlet
rear and 25 mm raised
Image
01.157.051.X-001
D 800 mm
D 1000 mm
D 1100 mm
D 1200 mm
01.147.570.X
01.147.572.X
01.147.573.X
01.147.574.X
01.157.050.X-008
01.157.050.X-001
01.157.050.X-002
01.157.050.X-003
01.157.052.X-001
01.157.052.X-003
01.157.052.X-007
01.157.052.X-008
01.157.051.X-002
01.157.051.X-004
01.157.051.X-011
01.157.051.X-012
01.147.268.X
Description
Dimensions
W 800 mm
D 600 mm
Top cover with lateral
cable inlet
Top cover with rear cable
entry
01.157.050.X-011
Top cover with cut out for
fan units and cable inlet rear.
Cut out closed with screwed
blanking panel.
Top cover with cably inlet
rear and 25 mm raised
Top cover, short d 250mm
Delivered
– In sets.
Dimensions
W 600 mm
D 600 mm
Top cover, short d 250mm
Included in delivery
– 1 top panel with cable entry.
– Mounting kit.
Finish / Colour
– d igit X of order number .1: RAL 7035 light-grey, powder-coated texture.
– digit X of order number .8: RAL 7021 dark-grey, powder-coated texture.
– With cable entry (sliding plates).
– For orderly cable management in the rack.
01.157.051.X-005
D 800 mm
D 1000 mm
D 1100 mm
D 1200 mm
01.147.575.X
01.147.577.X
01.147.578.X
01.147.579.X
01.157.050.X-012
01.157.050.X-004
01.157.050.X-005
01.157.050.X-006
01.157.052.X-004
01.157.052.X-006
01.157.052.X-009
01.157.052.X-010
01.157.051.X-006
01.157.051.X-008
01.157.051.X-009
01.157.051.X-010
01.147.269.X
35
VERTIV™ KNÜRR® MIR2® / VERTIV KNÜRR DCM®
RACK SPECIFIC ACCESSORIES
Bottom Plates
– For covering the rack underneath.
–With foam rubber seals and brush strips; cable entry at
the front and rear.
– For racks with and without castor mounting.
Material / Finish
– Steel sheet, 1.5 mm, galvanized.
– F or foam rubber seals (foam rubber, 50x30 mm).
Included in delivery
– Bottom plates.
– 2 x mounting brackets.
– Mounting kit.
Delivered
– In sets.
Image
Description
D 800 mm
Dimensions
W 600 mm
D 1000 mm
D 1100 mm
D 1200 mm
Bottom plate closed, used
with castor bracket
01.157.042.0-001
01.147.834.0
01.147.835.0
01.147.840.0
Bottom plate for cable entry
with foam rubber seal
01.157.041.0-001
01.147.846.0
01.147.847.0
01.147.852.0
Bottom plate, modular
01.157.040.0-001
01.157.040.0-003
01.157.040.0-004
01.157.040.0-005
Bottom plate for cable entry
with brush strip
01.157.045.0-001
01.157.045.0-003
01.157.045.0-004
01.157.045.0-005
Perforated bottom plate d
155mm
Image
01.157.025.0-001
Description
D 800 mm
D 1100 mm
D 1200 mm
Bottom plate closed, used
with castor bracket
01.157.042.0-003
01.147.838.0
01.147.839.0
01.147.844.0
Bottom plate for cable entry
with foam rubber seal
01.157.041.0-003
01.147.850.0
01.147.851.0
01.147.856.0
Bottom plate, modular
01.1570.040.0-006
01.157.040.0-008
01.157.040.0-009
01.157.040.0-010
Bottom plate for cable entry
with brush strip
01.157.045.0-006
01.157.045.0-008
01.157.045.0-009
01.157.045.0-010
Perforated bottom plate d
155mm
36
Dimensions
W 800 mm
D 1000 mm
01.157.025.0-003
Plinth
–
–
–
–
Stationary, including levelling options.
Cable entry accessible from all sides.
Removable cover plates.
Installation option for filter mat.
Included in delivery
– 4 x plinth corners, including levelling feet.
– 8 x cover plates without vents (for a height of 200
mm), 4 x cover plates without vents (for a height of
100 mm).
Load rating
– 10,000 N static.
Material
– Steel sheet.
Image
Image
Colour
–digit X of order number .1: RAL 7035 light-grey.
– d igit X of order number .8: RAL 7021 dark-grey.
Description
– 8 x cover plates (for a height of 200 mm,
4 without and 4 with vents), 4 cover plates (for a height
of 100 mm, 2 without vents and 2 x with vents).
– Mounting kit.
Delivered
– In sets.
D 600 mm
D 800 mm
Dimensions
W 600 mm
D 1000 mm
Stationary plinth, 100 mm
high, without vents
01.157.055.X-001.
01.157.055.X-002
01.147.738.X
01.147.739.X
01.147.740.X
Stationary plinth, 100 mm
high, with vents
01.157.060.X-001
01.157.060.X-002
01.157.060.X-004
01.157.060.X-005
01.157.060.X-006
Stationary plinth, 200 mm
high, without vents
01.157.056.X-001
01.157.056.X-002
01.147.788.X
01.147.789.X
01.147.790.X
Stationary plinth, 200 mm
high, with vents
01.157.065.X-001
01.157.065.X-002
01.157.065.X-004
01.157.065.X-005
01.157.065.X-006
D 600 mm
D 800 mm
Dimensions
W 800 mm
D 1000 mm
D 1100 mm
D 1200 mm
Stationary plinth, 100 mm
high, without vents
01.157.055.X-007
01.157.055.X-008
01.147.746.X
01.147.747X
01.147.748.X
Stationary plinth, 100 mm
high, with vents
01.157.060.X-007
01.157.060.X-008
01.157.060.X-010
01.157.060.X-011
01.157.060.X-012
Stationary plinth, 200 mm
high, without vents
01.157.056.X-007
01.157.056.X-008
01.147.796.X
01.147.797X
01.147.798.X
Stationary plinth, 200 mm
high, with vents
01.157.065.X-007
01.157.065.X-008
01.157.065.X-010
01.157.065.X-011
01.157.065.X-012
Description
D 1100 mm
D 1200 mm
37
VERTIV™ KNÜRR® MIR2® / VERTIV KNÜRR DCM®
RACK SPECIFIC ACCESSORIES
Side Panel
Finish / Colour
– d igit X of order number .1:
RAL 7035 light-grey.
– digit X of order number .8:
RAL 7021 dark-grey.
–Side panel module for 19" server rack.
Material
– Steel sheet: 1.0 mm.
Included in delivery
– 1 x side panel.
– Mounting kit.
Delivered
– In sets.
H
D
Version
Order No.
Units
2000
600
Side panel
01.147.871.X-004
1 unit
2000
800
Side panel
01.147.871.X-005
1 unit
2000
1000
Side panel
01.147.876.X
1 unit
2000
1100
Side panel
01.147.877.X
1 unit
2000
1200
Side panel
01.147.878.X
1 unit
2200
600
Side panel
01.147.871.X-007
1 unit
2200
800
Side panel
01.147.871.X-008
1 unit
2200
1000
Side panel
01.147.880.X
1 unit
2200
1100
Side panel
01.147.881.X
1 unit
2200
1200
Side panel
01.147.882.X
1 unit
Partition Wall
Partition wall for retro-fitting
– For air containment between two fixed adjacent racks.
–The partition wall is fitted between two racks and can be inserted from one side of
the linking racks.
– Guided along the upper rear extrusion of one of the linked racks.
–After the partition wall has been inserted, fasteners are bent or welded on one side of
the wall and screwed into the vertical T-slot to secure the structure. The rack
connectors supplied upon delivery are used on the opposite side.
Material
– Steel sheet: 1.0 mm.
Mounted partition wall fixed
–For air containment between two fixed adjacent racks.
–The partition wall is only mounted on one rack and must be mounted before the
other racks are installed.
–The partition wall is slotted in at the top of the rear extrusion and attached to the
basic rack with quick connectors.
–The rack connectors are then fitted to the top and bottom of the frame extrusions
from the inside.
–Plastic cover extrusions are provided to seal the gap between the two racks. These
can be clipped into place at the front and back of the gap.
Included in delivery
– 1 x partition wall.
– 1 x set of rack connectors.
– 2 x cover extrusions , earthing set (for fixed partition wall only).
– Mounting kit.
Finish / Colour
– digit X of order number .1: RAL 7035 light-grey, powder-coated texture.
– digit X of order number.8: RAL 7021 dark-grey, powder-coated texture.
Delivered
– In sets.
Image
Description
Dimensions
Dimensions
H 2000 mm
38
H 2200 mm
D 1000 mm
D 1100 mm
D 1200 mm
D 1000 mm
D 1100 mm
D 1200 mm
Partition wall for retro-fitting
01.147.644.X
01.147.645.X
01.147.646.X
01.147.647.X
01.147.648.X
01.147.649.X
Mounted, fixed partition wall
01.147.690.8
01.147.691.8
01.147.692.8
01.147.693.X
01.147.694.X
01.147.695.X
Air Containment
– The cold/warm area partition can be quickly
and easily retrofitted into the rack.
–Side cover plates with 2 cut-outs each for cables (for
800 mm wide racks).
–3 x 1 HE cut-outs, covered with cover plates (only in
versions with vents).
–Bolted to the sides of the 19" extrusions (in 800 mm
wide racks).
–Sealed off from the side panels or from the same level
of adjoining racks.
–Foam components allow for infinite
adjustability in terms of depth.
Image
Description
Included in delivery
– 2 x side cover plates (for 800 mm wide racks).
– 1 x cover plate, bottom.
– 1 x foam block for the top.
– Mounting kit.
Material
– Steel sheet.
Colour
– digit
X of order number .1:
RAL 7035 light-grey.
– digit X of order number .8:
RAL 7021 dark-grey.
Version
Delivered
– In sets.
Dimensions
H 2000 mm
Dimensions
H 2200 mm
W 600 mm
W 800 mm
W 600 mm
W 800 mm
for Racks with castor brackets
01.147.898.X
01.147.889.X
01.147.899.X
01.147.890.X
for Racks without castor brackets
01.147.901.X
01.147.895.X
01.147.902.X
01.147.896.X
Air containment without
vents
for Racks with castor brackets
01.147.904.X
01.147.905.X
for Racks without castor brackets
01.147.907.X
01.147.908.X
Air containment with 3 x 1
HE cover plates, vertical
Dimensions in mm:
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
UP = Packaging unit
39
VERTIV™ KNÜRR® MIR2® / VERTIV KNÜRR DCM®
RACK SPECIFIC ACCESSORIES
19" Vertical Extrusion with Mounting Holes and U Measure Tape
Included in delivery
– Front (2 x 19" vertical extrusions with cross beam
and 2 x 19" mountings – for 600 mm wide racks
without cross beam and 19" mountings).
– Rear (2 x 19" vertical extrusions with 4 x 19"
mountings – for 600 mm wide racks without 19"
mountings).
– For mounting 19" rack components.
–For mounting cable management systems and
components.
–For mounting slot-in runners, intermediate fixed and
pull-out shelves. (no adapter neccesary)
–For mounting drawers.
Material / Finish
– Steel sheet: 1.5 mm, galvanized.
– Measure Tape glued.
Delivered
– In sets.
W
H
U
Description
Order No.
Units
600
2000
42
19" Vertical extrusion, front
01.157.110.7.003
1 pair
600
2000
42
19" Vertical extrusion, rear
01.157.110.7.003
1 pair
600
2200
47
19" Vertical extrusion, front
01.157.110.7.004
1 pair
600
2200
47
19" Vertical extrusion, rear
01.157.110.7.004
1 pair
800
2000
42
19" Vertical extrusion, front
01.157.113.7.003
1 pair
800
2000
42
19" Vertical extrusion, rear
01.157.114.7.003
1 pair
800
2200
47
19" Vertical extrusion, front
01.157.113.7.004
1 pair
800
2200
47
19" Vertical extrusion, rear
01.157.114.7.004
1 pair
19" vertical extrusion
aluminum with T-slot and increment slide
Scope of delivery
– 1 pair 19" LAN T-Slot, with cross beam (depends on
order number), with mounting kit.
–For front and rear installation with in the rack.
–Spring nut, variable and adjustable, in U increments
(19").
Material
– Extruded aluminum, polished.
Note
Maximal loading per pair 400 kg.
W
H
U
Description
Order No.
Units
800
2000
42
19"-LAN T-Slot, with cross beam, for front side
01.157.105.0.003
1 pair
800
2200
47
19"-LAN T-Slot, with cross beam, for front side
01.157.105.0.004
1 pair
800
2000
42
19"-LAN T-Slot, without cross beam, for back side
01.157.106.0.003
1 pair
800
2200
47
19"-LAN T-Slot, without cross beam, for back side
01.157.106.0.004
1 pair
600
2000
42
19"-LAN T-Slot, without cross beam, for front and back side
01.157.102.0.003
1 pair
600
2200
47
19"-LAN T-Slot, without cross beam, for front and back side
01.157.102.0.004
1 pair
Dimensions in mm:
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
40
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
UP = Packaging unit
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
U tape measure
LUF20337
– For sticking on 19" extrusions.
–Enables fast component positioning at the correct U
position.
–Standard length, 48 U; shorten as required.
Scope of delivery
– 1 x tape measure.
U
Order No.
UP
48
01.128.400.9
1 unit
Mounting Adapter
for 19" Server Extrusion
–For mounting standard Vertiv™ Knürr®-
(shelves, drawers, slot-in runners, keycomponents
pad drawers, etc.) inside 19" racks.
DCM20052
Material
– Steel sheet: 2.5 mm, galvanized.
Included in delivery
– 4 x adapters.
W
H
U
Order No.
Units
63
44
1
01.147.640.9
1 set
41
VERTIV™ KNÜRR® MIR2® / VERTIV KNÜRR DCM®
RACK SPECIFIC ACCESSORIES
19"-Swing frame
Useful depth in the swing frame
for open angle 135° or 145°
–Caution: The cabinet must be screwed to the floor
and wall when using the swing frame!
Mounting position A
– Load rating max. 200 kg.
– Opening angle 135°.
– Useful depth in swing frame 470 mm.
– For Racks with 800 mm width only.
19"-Swing frame
– For
installation of 19"-components to IEC 297-3.
ermits easy access to second mounting level and
–P
to components installed in the swing frame.
ountable into Racks with 800 mm widths only.
–M
Load rating
– 200
kg at mounting position A.
– 3 00 kg at mounting position B.
Material
– Sheet steel 2 mm.
Finish
– Powder coated, textured.
Mounting position B
– Load rating max. 300 kg.
– Opening angle 145°.
– Useful depth in swing frame 360 mm.
– For Racks with 800 mm width only.
DREH
Color
– Digit
X = .1. RAL 7035 light-grey.
– Digit X = .8. RAL 7021 dark grey.
Supply schedule
– 1 x 19"–Swing frame.
– 1 x Mounting frames top and bottom.
– 1 x Square Key.
– 1 x Mounting hardware.
Delivered
– Assembled.
Note
Installation
of a swing-frame reduces the nominal
installation height of the rack at 4U.
Mounting-Kit,
floor mounting
Material
– Sheet steel, 3,0 mm.
MIR00319
W
H
U
h
Order No.
Units
800
2000
39
1732
01.157.130.X.003
1 unit
800
2200
44
1954
01.157.130.X.004
1 unit
Finish
– Zinc passivized.
Supply schedule
– 4 piece.
Mounting-Kit, wall
Order No.
Units
01.130.934.7
1 unit
Material
– Sheet steel 3 mm.
Finish
– Powder coated, textured.
Color
– Digit
X = .1. RAL 7035 light-grey.
–D
igit X = .8. RAL 7021 dark-grey.
Supply schedule
– 1 unit, with 2 top cover screws.
Order No.
Units
01.156.162.X.001
1 unit
Dimensions in mm:
42
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
UP = Packaging unit
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
Internal Mounting
Rack Connector
Brush strip
–Brush strip for all covers with cable entry.
–For dust-protected and flexible cable entry.
–Can be used instead of mounting the
sliding covers in the top cover.
–For mechanical, stable joining of
rack and enclosure suites.
MIR00100
Scope of delivery
– 2 x brush strips.
MIR20093
Material / Finish
– Steel sheet: 2 mm, galvanised.
How supplied
– In sets.
Installation positions
1. O
n the horizontal extrusions (top & bottom and
front & back).
2. V
ertically on the vertical extrusion (front & back
and top & bottom).
2
1
B
Version
Order No.
UP
for Rack width 600/800 mm
lenght 436 mm
01.130.998.9
2 units
Included in delivery
– 8 x mounting brackets (for connecting 2 racks /
frames).
– Mounting kit.
DCM20084
Delivery
– In sets.
Brush Strips for Covers
with Cable Entry on the Side
– Brush strip for all covers with cable entry.
–For dust-protected and flexible cable entry.
–Can be used instead of mounting the sliding covers in the top cover.
Brush strips for covers
Order No.
Units
01.130.935.7
1 set
Filter mat for plinth cover plate
Included in delivery
– 4 x brush strips.
for installation in plinth cover plate
at the front and rear
Delivered
– In sets.
MIR00161
Scope of delivery
– 2 x filter mats.
How supplied
– In sets.
H
Version
Order No.
Units
800
Brush strip lateral
01.157.016.9-001
1 unit
1000
Brush strip lateral
01.157.016.9-003
1 unit
W
Order No.
UP
1100
Brush strip lateral
01.157.016.9-004
1 unit
600
01.130.530.9
2 units
1200
Brush strip lateral
01.157.016.9-005
1 unit
700
01.130.531.9
2 units
800
01.130.532.9
2 units
Castor Bracket
– Mobile version: an additional 2 castor mountings with
castors including integrated cable entry.
– Set is loadable up to 4000N.
Cross beam
Material / Finish
– Steel sheet: powder-coated texture.
Colour
– RAL 7021 dark-grey.
Included in delivery
– 1 set of castor brackets.
– Mounting kit.
Delivery
– In sets.
W
Version
Order No.
Units
600
MIR 2.0 castor bracket
01.157.073.8 001
1 set
800
MIR 2.0 castor bracket
01.157.073.8 003
1 set
Dimensions in mm:
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
UP = Packaging unit
43
VERTIV™ KNÜRR® MIR2® / VERTIV KNÜRR DCM ®
RACK SPECIFIC ACCESSORIES
Vertiv™ Knürr®
Connector Installed on Top
DCM20082
Assembly kit
Side panel threaded connection
– Used to screw on the side walls instead of quick
connectors.
– Renders rack more sturdy.
–For mechanical, stable joining of rack and enclosure
suites.
–Can be installed on racks from the top directly into
the die-cast corner piece.
–Easy access for installation from the outside.
Material
– Countersunk washers and mounting nuts, stainless
steel.
Material / Finish
– Steel sheet: 3 mm, galvanized.
Included in delivery
– 2 x rack connectors (for connecting 2 racks /
frames).
– 4 x knurled screws, M12.
MIR00318
How supplied
– In sets.
Delivery
– In sets.
DCM20083
Scope of delivery (for 2 side panels)
– 16 x countersunk washers.
– 16 x mounting nuts, M5.
– 16 x countersunk screws, M5 x 12.
Version
Order No.
Units
Order No.
UP
30 x 140
01.147.642.7
1 set
01.130.937.9
1 set
Earthing set / doors / top cover
/ side panel / rear panel
Quick connectors
For side and rear panels
–Covers can be secured quickly by rotating the locks
90°.
–Easy to turn with wide flat-head screwdriver.
–For safe earthing of doors and panels.
MIR00216
Scope of delivery
– 1 x earthing connection.
– 1 x Mounting kit.
MIR20331
How supplied
– In sets.
Material / Color
– Final digit of order number 1: Polyamide PA66, RAL
7035, light-grey.
– Final digit of order number 9: Polyamide PA66,
RAL 9011, dark-grey.
How supplied
– Sets of 50 units.
MIR00217
Model
Order No.
UP
for side panel RAL 7035
01.133.900.1
1 set
Model
Order No.
UP
for side panel RAL 9011
01.133.900.9
1 set
for side panel/backside panel
01.157.015.9-001
1 set
for rear panel RAL 7035
01.133.910.1
1 set
for top cover
01.157.015.9-002
1 set
for rear panel RAL 9011
01.133.910.9
1 set
for single doors
01.157.015.9-003
1 set
for split doors
01.157.015.9-004
1 set
Order No.
UP
01.131.751.9
4 units
Cover screws
Material
– Plastic.
MIR20447
Dimensions in mm:
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
44
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
UP = Packaging unit
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
How supplied
– Sets of 4 units.
Cover extrusion
for rack suites, IP 20
Crane eyes
–For hanging on crane hooks.
–The crane eyes are screwed into the threads
provided on the basic frame.
MEC00074
Material
– PVC extruder cover, black.
Scope of delivery
– 2 x vertical lengths.
– 2 x depth lengths.
Load rating
– Max. 6,800 N.
Material
– Tool steel, forged.
Scope of delivery
– 4 x ring bolts.
– 4 x washers.
MIR00320
How supplied
– In sets.
MEC20194
Order No.
UP
01.131.745.9
1 set
Spacer bolt
–M12 bolts.
MIR20464
Scope of delivery
– Set of 4 units spacer bolt.
MIR20443
H
D
U
Order No.
UP
1200
600
23
01.131.270.9
1 set
1800
600
37
01.131.273.9
1 set
2000
600
41
01.131.274.9
1 set
2200
600
46
01.131.275.9
1 set
1200
800
23
01.131.276.9
1 set
1800
800
37
01.131.279.9
1 set
2000
800
41
01.131.280.9
1 set
2200
800
46
01.131.281.9
1 set
1200
900
23
01.131.282.9
1 set
Order No.
UP
1800
900
37
01.131.285.9
1 set
01.131.752.7
4 units
2000
900
41
01.131.286.9
1 set
2200
900
46
01.131.287.9
1 set
2000
1000
41
01.127.760.9
1 set
2200
1000
46
01.127.761.9
1 set
2000
1200
41
01.127.762.9
1 set
2200
1200
46
01.127.763.9
1 set
Dimensions in mm:
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
UP = Packaging unit
45
VERTIV™ KNÜRR® MIR2®/ VERTIV KNÜRR DCM®
RACK SPECIFIC ACCESSORIES
Mounting bracket
Fixed
Combination lock
– Sits flush ("airtight").
– Even load distribution on base.
–Also compatible with DCM racks.
–Mechanical solution for a top-quality locking system.
–Access either via a three-digit code that can be
individually set on the handle or via a master key for
access to the rack independent of the code setting.
–Suitable for Miracel 2/DCM rack single doors with
swing handle.
–Subsequent retrofitting also possible without
mechanical alteration.
DCM20090
Load rating
– 15,000 N static.
Material
– Sheet steel 3.0 mm.
MIR20449
MIR20095
Finish
– Order
no. 1: Powder-coated texture,
RAL 7035 light-grey.
– Order no. 8: Powder-coated texture,
RAL 7021 dark-grey.
Scope of delivery
– 2 x mounting brackets for the depth.
– 2 x mounting brackets for the width.
– 1x Mounting kit.
Model
Order No.
UP
Single doors MIR2 / DCM®
01.137.013.9
1 unit
How supplied
– In sets.
Door locking set
Scope of delivery
– 1 lock set.
– 2 keys (half-cylinder).
W
H
D
Order No.
UP
600
27
600
01.147.509.X
1 unit
MIR20460
600
27
700
01.147.510.X
1 unit
Model
Order No.
UP
600
27
800
01.147.511.X
1 unit
MIR2 / DCM
01.130.940.9
1 set
600
27
900
01.147.512.X
1 unit
600
27
1000
01.147.513.X
1 unit
600
27
1100
01.147.514.X
1 unit
600
27
1200
01.147.515.X
1 unit
800
27
600
01.147.525.X
1 unit
800
27
700
01.147.526.X
1 unit
800
27
800
01.147.527.X
1 unit
800
27
900
01.147.528.X
1 unit
800
27
1000
01.147.529.X
1 unit
Complete locking set
Scope of delivery
– 2 cylinders with 2 keys each.
– 2 lockable fasteners for side panel with 2 keys
each.
MIR00069
800
27
1100
01.147.530.X
1 unit
Model
Order No.
UP
800
27
1200
01.147.531.X
1 unit
MIR2 / DCM
01.130.940.9
1 set
Spare key for door
Scope of delivery
– 1 x key.
MIR20461
46
Order No.
UP
00.078.467.9
1 unit
VERTIV™ KNÜRR® MIR2®/ VERTIV KNÜRR DCM®
RACK SPECIFIC ACCESSORIES
Multifunctional brace
MIR00089
Cable routing brace
–For routing cables with cable ties.
–For universal mounting option.
–Holes for mounting caged nuts.
–Distance between two multifunctional braces can be
selected using T-slot.
–Installation on the extrusions of the rack frame or on
the 19” extrusions, diagonal and lateral.
MEC20091
Installation positions
– 1 toward rear of basic frame.
– 2 across width of basic frame.
– 3 across width of 19" extrusions.
– 4 toward rear of 19" extrusions.
Pos.2
M
aterial
– Sheet steel, 1.5 mm.
F
inish
– Zinc-passivated.
Material
– Sheet steel 1.5 mm.
Pos.1
Pos.4
–Fitted to the Miracel 2/DCM/Smaract basic frame
and the 19" extrusion.
–Cables fastened using Velcro and cable ties.
–For organized cable management with in the rack.
–Two-sided installation.
–Provides universal mounting using caged nuts (all
dimensions can be accommodated; caged nuts are
flexible).
MEC20078
Finish
– Zinc-passivated.
H
ow supplied
– Single items.
Scope
of delivery
– 4 x multifunctional braces.
Pos.3
N
ote
If required, please also order Velcro rolls .
How supplied
– In sets.
MIR88003
Scope
of delivery
– 4 x cable routing braces.
– 1 x Mounting kit.
Remark
Pos. 4 fits only with LAN or T-Nut 19" extrusion.
Pos.1
Pos.3
Installation position
For rack type
Order No.
UP
600
DRack
d
1
MIR2/DCM
05.040.160.9
4 units
800
1
MIR2/DCM
05.040.161.9
4 units
D
L
Model
For rack type
Order No.
UP
900
1
MIR2/DCM
05.040.162.9
4 units
600
455
Pos. 1
MIR2 / DCM
05.040.200.9
4 units
1000
1
MIR2/DCM
05.040.163.9
4 units
800
655
Pos. 1
MIR2 / DCM
05.040.201.9
4 units
1100
1
MIR2/DCM
05.040.164.9
4 units
900
755
Pos. 1
MIR2 / DCM
05.040.202.9
4 units
1200
1
MIR2/DCM
05.040.165.9
4 units
1000
855
600
2
MIR2/Smaract
05.040.173.9
4 units
1200
800
2
MIR2
05.040.174.9
4 units
3
MIR2/DCM/Smaract/DPR
05.040.175.9
4 units
600
365
4
MIR2/Smaract
05.040.168.9
4 units
800
565
4
MIR2/Smaract
05.040.169.9
4 units
600
440
4
MIR2/Smaract
05.040.170.9
4 units
800
640
4
MIR2/Smaract
05.040.171.9
4 units
900
740
4
MIR2/Smaract
05.040.172.9
4 units
1000
740
4
MIR2/Smaract
05.040.172.9
4 units
MIR88001
Pos. 1
MIR2 / DCM
05.040.203.9
4 units
Pos. 1
MIR2 / DCM
05.040.205.9
4 units
Pos. 3
Smaract/DPR
05.040.215.9
4 units
W = Width
h = Installation height
U = Standard rack unit
H = Height
d = Insertion depth
D = Depth
L = Length
468
Dimensions in mm:
Conversion:
(1 U = 44.45 mm)
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
UP = Packaging unit
47
VERTIV™ KNÜRR® MIR2®/ VERTIV KNÜRR DCM®
RACK SPECIFIC ACCESSORIES
Type 1
Vertiv™ Knürr® MIR2® / Vertiv™
Knürr® DCM® PDU Bracket
C extrusion rail
Type 2
MEC00113
–For orderly cable management in the rack.
–For hanging in trade-standard PDUs without tools.
–Especially suited to Knürr and Liebert PDUs.
–Cables secured with U-clamps or cable clamping
bars.
–Space-saving installation between the extrusions on
the basic rack.
–Two-sided installation.
Material / Finish
– Steel sheet, 1.5 mm, zinc passivated, powdercoated.
DCM20077
Material
– Sheet steel, 1.5 mm, zinc-passivated.
Color
– Final digit of order number .1: RAL 7035 light-grey.
– Final digit of order number .8: RAL 7021 dark-grey.
Finish
– Zinc-passivated.
Pos.1
Scope of delivery
– 4 x extrusion rails.
– 1 x Mounting kit.
Scope of delivery
– 1 x PDU bracket.
– 1 x Mounting kit.
How supplied
– In sets.
How supplied
– In sets.
DCM20076
Note
Please also order U-clamps, cable clamping bars or
threaded plates.
Pos.2
MIR88004
D
Installation position
For rack type
Order No.
UP
800
W
1
MIR2 / DCM
05.040.181.9
4 units
900
1
MIR2 / DCM
05.040.182.9
4 units
1000
1
MIR2 / DCM
05.040.183.9
4 units
1200
1
MIR2 / DCM
05.040.185.9
4 units
2
MIR2
05.040.194.9
4 units
800
W
HRack
D
U
Order No.
UP
125
2000
25
42
01.147.816.X
1 unit
125
2200
25
47
01.147.817.X
1 unit
PDU mounting kit
– For securing various rack PDUs.
– Suitable for Miracel 2 and DCM racks.
– For installing 1 or 2 PDUs.
–Installation options are described in the "Installation
instructions for PDUs" manual.
C extrusion rail
MEC20222
MIR00096
Type 1
–Cables secured with U-clamps or cable clamping
bars.
–Cable clamping close to entry point (type 1).
–Suitable for use with cover panel including cable
entry.
S
cope of delivery
– 2 x L mounting brackets.
– 2 x angular mounting brackets.
– 1 x Mounting kit.
Material / Finish
– Sheet steel, 1.5 mm, zinc passivated.
How supplied
– In sets.
Scope of delivery
– 1 x C extrusion rail.
– 1 x Mounting kit.
Pos.1
Pos.2
Material / Finish
– Sheet steel, 2 mm, zinc passivated.
MEC20223
How supplied
– In sets.
Note
Please also order U-clamps, cable clamping bars or
threaded plates.
Type 2
Model
For rack type
Order No.
UP
Type 1: short
MIR2 / DCM
01.147.813.9
1 set
Type 2: long
MIR2 / DCM
01.147.814.9
1 set
MIR88002
W
L
Model
Order No.
UP
600
482.5
Pos. 1: MIR2 / DCM / Smaract
05.040.080.0
1 unit
800
682.5
Pos. 1: MIR2 / DCM
05.040.082.0
1 unit
19"
508
Pos. 2: MIR2 / DCM / Smaract / Doubleprorack
01.110.719.9
1 unit
Dimensions in mm:
48
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
UP = Packaging unit
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
Vertiv™ Knürr® DCM®
gap sealing depth profil
Tilt restraint for Vertiv Knürr® MIR2®
only 2 Racks, Quick Assembly System
–Quick and easy retrofitting.
– Gap sealing between the linked rack.
– Quick and easy mounting
– Used as required
MIR20051
Included in delivery
– 2 x tilt restraints.
Material
– Steel sheet, zinc-passivated 1,5 mm.
DSC00194
Scope of delivery
– 2 gab sealings.
– Mounting kit.
Delivery
– In sets.
Description
Order No.
Units
for MIR2 Rack only
01.127.310.9
2 units
Vertiv™ Knürr® DCM®
Seismic Kit
How supplied
– In Sets.
DSC00202
Description
Order No.
UP
for DCM Rack only
01.147.643.9
1 unit
–Retrofitting set for DCM® racks.
–Installed on site.
–Rack with installed seismic kit tested in accordance
with Telcordia GR63 Zone 4.
–Maximum total load for seismic application: 500 kg
per rack.
DCM20107
Tilt Restraint for Vertiv™ Knürr®
DCM®
–Quick and easy mounting and removal.
–Can be integrated in the Vertiv Knürr DCM® rack.
– Use only as required.
Material / Finish
– Steel sheet, powder-coated.
Scope of delivery
– 2 x anti-tilt restrainers.
Color
– RAL 7021, dark-grey.
How supplied
– In sets.
DCM Rack
Scope of delivery
– 2 x seismic frames.
– Support for rear EIA-compliant level.
– 1 x Mounting kit.
DCM20026
How supplied
– In sets.
W
H
Model
Order No.
UP
600
2000
DCM® USA
01.147.909.8
1 set
600
2000
DCM® Standard
01.147.912.8
1 set
Description
Order No.
UP
for DCM Rack only
01.147.641.9
2 unit
for DCM Rack only
Dimensions in mm:
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
UP = Packaging unit
49
VERTIV™ KNÜRR® SYSTEM ACCESSORIES
Vertiv™ Knürr® System Accessories
Features
BLANKING PANELS
Design identical to racks
Tool-less, threaded version available.
Blanking panels are an essential feature in operating an energy-efficient data center, as they
ensure that cold and warm air in the rack are separated.
Varying sizes for quick mounting and
efficient cooling.
When there are no mounting adapters for IT components, chassis rails and shelves are
required.
CHASSIS RAILS
Various designs catering to different
requirements.
Height positioning for different corpus
heights of the subracks possible (not
defined according to 19" standard).
DRAWERS AND SHELVES
Various designs catering to different
loads.
Shelves with tool-less mounting
available.
50
Mechanical accessories are fundamental to effective and economical
use of server- and network racks.
Drawers are used to store manuals, spare parts and tools needed on site.
QuickFix 19" blanking panel
Tool-less assembly
19" blanking plate
Screw-on
–For covering free 19" spaces (cold-hot separation).
–Quick and easy tool-less assembly (one click) and
disassembly (quarter turn).
–Suitable for 9.5 x 9.5 square holes.
MEC20179
–For covering free 19" spaces (cold-hot separation).
Material
– Sheet steel, 1.0 mm.
CUD00005
Material
– Sheet steel, 1.0 mm.
Finish
– Final digit of order number .1: powder-coated
texture, RAL 7035, light-grey.
– Final digit of order number .8: powder-coated
texture, RAL 7021 dark-grey.
Finish
– Final
digit of order number .1: powder-coated
texture, RAL 7035, light-grey.
– F inal digit of order number .8: powder-coated
texture, RAL 7021 dark-grey.
MEC20180
CUD00004
Scope of delivery
–X
(see Order Number for quantity) QuickFix 19"
blanking panel.
–M
ounting kit.
How supplied
– In sets (see ON for quantity).
Note
Please also order front panel mounting material.
How supplied
– In
sets (see Order Number for quantity); fixing clips
pre-assembled.
MEC20178
Scope of delivery
– X (see Order Number for quantity) QuickFix 19"
blanking panel.
W
H
U
Order No.
UP
482.6
43.6
1
01.103.201.X
6 units
W
H
U
Order No.
UP
482.6
88.1
2
01.103.202.X
3 units
482.6
43.6
1
01.103.301.X
6 units
482.6
132.5
3
01.103.203.X
2 units
482.6
88.1
2
01.103.302.X
3 units
482.6
265.9
6
01.103.206.X
1 unit
482.6
132.5
3
01.103.303.X
2 units
482.6
399.2
9
01.103.209.X
2 units
482.6
265.9
6
01.103.306.X
1 unit
482.6
399.2
9
01.103.309.X
2 units
482.6
932.6
21
01.103.321.X
1 unit
19" vented front cover plate
– Provides additional ventilation for 19" racks and 19"
plinths compliant with IEC 297.
19" QuickFix blanking panel,
tool-less assembly
LUF88006
MEC20181
–For orderly cable management inside the rack.
–Quick and easy tool-less assembly (one click) and
disassembly (quarter turn).
–Suitable for 9.5 x 9.5 square holes.
Material
– Sheet
steel, 1.0 mm.
MEC20178
LUF00093
Finish
– Final
digit of order number .1: powder-coated
texture, RAL 7035, light-grey.
– F inal digit of order number .8: powder-coated
texture, RAL 7021 dark-grey.
Scope of delivery
– 1 x vented front cover plate.
– 2 x connectors.
How supplied
– In sets.
Note
Please also order the appropriate mounting kit for
the front plates.
Scope of delivery
– 6 x QuickFix 19" blanking panel cable ports.
– 1 x Mounting kit.
How supplied
– In
sets (clips pre-assembled).
Material / Color
– F inal digit of order number .1: ABS (UL 94 V0),
light-grey RAL 7035.
– F inal digit of order number .9: ABS (UL 94 V0),
black RAL 9011.
W
H
U
Order No.
UP
483
43.6
1
02.008.111.1
1 unit
483
43.6
1
02.008.111.9
1 unit
MEC20229
W
H
U
Order No.
UP
482.6
43.6
1
01.103.331.X
6 units
51
VERTIV™ KNÜRR® ACCESSORIES
19" front plate
Aluminum 3 mm
FR000005
19" ventilation front panel
–Provides additional ventilation for 19" racks and 19"
plinths compliant with IEC 297.
Material / Finish
– F inal digit of order number .0: AlMg3 - F23 polished
with lamination sheet.
– F inal digit of order number .1: AlMg3 - F23, powdercoated, RAL 7035, light-grey.
– F inal digit of order number .6: AlMg3 - F23 EB
(anodize-enabled), anodized E6/EV1.
– F inal digit of order number .8: AlMg3 - F23,
powder-coated, RAL 7021, dark-grey.
LUF00217
Material
– Aluminum.
Finish
– Final digit of order number .1: powder-­coated, RAL
7035 light-grey.
– Final digit of order number .6: colorless anodized E
6 / EV 1.
Scope of delivery
– 1 x 19" front plate.
Scope of delivery
– 1 x ventilation front plate.
How supplied
– Single items.
MEC20110
Note
Please also order the appropriate mounting kit for
the front plates.
How supplied
– Single items.
Note
Please also order the appropriate mounting kit for
the front plates.
MEC20109
H
Y
U
Model
Order No.
UP
H
Y
U
Model
Order No.
UP
43.6
X
31.7
1
Polished
02.008.021.0
1 unit
43.6
31.7
1
Powder-coated. RAL 7035
02.008.101.1
1 unit
43.6
31.7
1
Anodized
02.008.101.6
1 unit
43.6
31.7
1
Powder-coated. RAL 7035
02.008.021.1
1 unit
132.5
57.1
3
Powder-coated. RAL 7035
02.008.103.1
1 unit
132.5
57.1
3
Anodized
02.008.103.6
1 unit
88.1
76.2
2
Powder-coated. RAL 7035
02.008.022.1
1 unit
132.5
57.1
3
Powder-coated. RAL 7035
02.008.023.1
1 unit
101.6
4
Powder-coated. RAL 7035
02.008.024.1
1 unit
190.4
6
Powder-coated. RAL 7035
02.008.026.1
1 unit
43.6
31.7
1
Powder-coated. RAL 7021
02.008.021.8
1 unit
43.6
31.7
1
Anodized
02.008.071.6
1 unit
88.1
76.2
2
Anodized
02.008.072.6
1 unit
177.0
265.9
76.2
19" front plate
hinged
– With 19" adapter and hinge.
132.5
57.1
3
Anodized
02.008.073.6
1 unit
177.0
101.6
4
Anodized
02.008.074.6
1 unit
190.4
6
Anodized
02.008.076.6
1 unit
265.9
76.2
Material
– Aluminum, 3 mm.
FRO00007
Scope of delivery
– 1 x front plate, hinged.
– 1 x 19" adapter.
– 1 x hinge.
Cover-plate filter
for 19" vented front cover plate
MEC20144
How supplied
– In sets.
–Used with 19" vented front cover plate.
Material / Color
– Non-woven and screen cloth.
MEC20149
FR000006
Note
Please also order the appropriate mounting kit for
the front plates.
Scope of delivery
– 1 x cover-plate filter.
– 1 x Mounting kit.
How supplied
– In sets.
U
Order No.
UP
1
02.008.131.9
1 unit
52
Finish
– Anodized.
U
Model
Order No.
UP
3
Anodized
01.110.780.6
1 unit
6
Anodized
01.110.781.6
1 unit
Chassis runner
Aluminum chassis runner
Can be hooked on and screwed on
MEC20162
–For installation in 19" rack and 19" enclosure.
–Can be hooked on for quick and easy mounting.
–Can also be attached with screws to accommodate
heavier loads.
–Can be screwed from inside (used in rack suites).
–Adjustable height to suit various main-section
heights.
MEC20189
–Can be screwed on.
–For installation in 19" rack and 19" enclosure.
–Can be screwed from inside (used in rack suites).
–Height can be adjusted to suit various main-section
heights.
Material / Finish
– Extruded aluminum, polished.
Material / Finish
– Sheet steel, 2.0 mm.
– Zinc-passivated, blue chrome-plated.
Load rating
– 700 N max. with even load distribution.
Load rating
– 1000
N max. with even load distribution.
Scope of delivery
– 2 x chassis runners.
– 1 x Mounting kit.
MEC20167
Scope of delivery
– 2 x chassis runners.
– 1 x Mounting kit.
How supplied
– In pairs.
How supplied
– In pairs.
MEC20167
Note
When selecting the chassis runner, please take into
account the depth "d" of the rack or enclosure. Four
19" extrusions are required for mounting.
– Mounting adapter for 19" server extrusions
01.147.640.9 1 Set.
Note
When selecting the chassis runner, please take into
account the depth "d" of the rack or enclosure. Four
19" extrusions are required for mounting.
DRack
d
L
For rack type
Order No.
UP
600
365
336
MIR2 / DCM / Smaract
01.103.101.0
1 pair
DRack
d
L
For rack type
Order No.
UP
600
440
411
MIR2 / DCM / Smaract
01.103.102.0
1 pair
600
365
336
MIR2 / DCM / Smaract
01.103.051.0
1 pair
800
565
536
MIR2 / DCM / Smaract
01.103.103.0
1 pair
600
440
411
MIR2 / DCM / Smaract
01.103.052.0
1 pair
800
640
611
MIR2 / DCM / Smaract
01.103.104.0
1 pair
800
565
536
MIR2 / DCM / Smaract
01.103.053.0
1 pair
800
900
636
MIR2 / DCM / Smaract
01.103.105.0
1 pair
from 900 740
711
MIR2 / DCM / Smaract /
CoolTherm
01.103.106.0
600
354
ConAct
01.103.112.0
800
640
611
MIR2 / DCM / Smaract
01.103.054.0
1 pair
900
665
636
MIR2 / DCM / Smaract
01.103.055.0
1 pair
711
MIR2 / DCM / Smaract / CoolTherm
01.103.056.0
1 pair
from 900 740
385
1 pair
1 pair
600
435
403
DoubleProRack with door
01.103.118.0
1 pair
800
635
603
DoubleProRack with door
01.103.119.0
1 pair
500
460
428
DoubleProRack, no door
01.103.122.0
1 pair
600
560
528
DoubleProRack, no door
01.103.123.0
1 pair
700
660
628
DoubleProRack, no door
01.103.124.0
1 pair
Dimensions in mm:
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
UP = Packaging unit
53
VERTIV™ KNÜRR® ACCESSORIES
19" shelf
Fixed
Chassis runner, adjustable depth
MEC20163
– For installation in 19" rack and 19" enclosure.
– Adjustable depth.
–Can be screwed from inside (used in rack suites).
–Height can be adjusted to suit various main-section
heights.
–Integrated mounting holes; front and rear for handle
or hinged cable routing.
– Perforated to optimize air supply.
MEC00451
Material / Finish
– Sheet steel, 1.25 mm.
– Zinc-passivated, blue chrome-plated.
Color
– Final digit of order number .1: RAL 7035, light grey.
– Final digit of order number .8: RAL 7021 dark-grey.
Load rating
– 2 00 N max. with even load distribution.
MEC20166
Material / Finish
– Sheet steel 1.0 mm, electroplated zinc, powdercoated texture.
Load rating
– 500 N static per item.
Scope of delivery
– 2 x basic rails.
– 2 x extension rails.
– 1 x Mounting kit.
Scope of delivery
– 2 x mounting rails, incl. mounting bracket.
– 1 x shelf board.
– 1 x extension board (from L = 600).
– 1 x Mounting kit.
How supplied
– In pairs.
Note
When selecting the chassis runner, please take into
account the depth "d" of the rack or enclosure. Four
19" extrusions are required for mounting.
ounting adapter for 19" server extrusions
–M
01.147.640.9 1 Set.
How supplied
– I n sets.
MEC20018
Note
Please order requisite mounting adapter when used
for DCM or Miracel 2/Smaract 19" server extrusion.
– Miracel 2/DCM 1 Set 01.147.640.9
D
d
For rack type
Order No.
UP
d
WxL
For rack type
Order No.
UP
600
365-440
MIR2 / DCM / Smaract
01.103.091.0
1 pair
365
430x300
MIR2 / DCM / Smaract
01.102.001.1
1 unit
800-1200
565-740
MIR2 / DCM / Smaract
01.103.092.0
1 pair
440
430x300
MIR2 / DCM / Smaract
01.102.002.1
1 unit
900-1200
740
CoolTherm
01.103.092.0
1 pair
565
430x500
MIR2 / DCM / Smaract
01.102.003.X
1 unit
640
430x600
MIR2 / DCM / Smaract
01.102.004.X
1 unit
600
385
ConAct
01.103.091.0
1 pair
740
430x600
MIR2 / DCM / Smaract
01.102.005.X
1 unit
500-600
435-460
DoubleProRack
01.103.091.0
1 pair
600-800
560-660
DoubleProRack
01.103.092.0
1 pair
435, 460
430x300
DoubleProRack
01.102.002.1
1 unit
560
430x500
DoubleProRack
01.102.003.1
1 unit
635, 660
430x600
DoubleProRack
01.102.004.1
1 unit
385
430x300
ConAct
01.102.001.1
1 unit
Dimensions in mm:
54
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
UP = Packaging unit
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
19" shelf
partially retractable
19" QuickFix shelf
tool-less assembly
MEC20221
–Quick and easy tool-less mounting. Mounted on 19"
cutouts.
–Quick and easy tool-less fitting (one click) and
removal (quarter turn).
–Suitable for all racks and enclosures with 19"
mounting hole extrusions (9.0 x 9.0 square holes).
–Adjustable depth to accommodate variable recess
depths and special dimensions.
–Perforated to optimize air supply.
MEC00452
–Integrated mounting holes, front and
rear for handle or hinged cable routing.
– Perforated to optimize air supply.
–Locks in retracted position (friction lock).
–Quick separator for tool-less removal and decoupling
of shelf board.
Material / Finish
– Sheet steel, electroplated zinc, powder-coated
texture.
Material
– Sheet steel, 1.0 mm.
Color
– Final digit of order number .1: RAL 7035, light grey.
– Final digit of order number .8: RAL 7021 dark-grey.
Finish
– Final
digit of order number .1: powder-coated
texture, RAL 7035, light-grey.
– F inal digit of order number .8: powder-coated
texture, RAL 7021 dark-grey.
Load rating
– 500 N static per item.
Scope of delivery
– 1 x pair of telescopic slides.
– 1 x shelf board.
– 1 x Mounting kit.
Load rating
– 700
N static with even load distribution.
Scope of delivery
– 1 x 19" QuickFix shelf.
– 1 x Mounting kit.
MEC20019
How supplied
– In sets.
How supplied
– In sets.
Note
Order requisite mounting adapter when used for
DCM or Miracel 2/Smaract 19" server extrusion.
– Mounting adapter for 19" server extrusions
01.147.640.9 1 Set.
Note
Cannot be used for 19" t-slot extrusions.
d
WxL
Order No.
UP
d
WxL
Order No.
UP
365–500
430 x 300
01.102.071.X
1 unit
365-565
430 x 360
01.102.042.X-001
1 unit
565–740
430 x 500
01.102.072.X
1 unit
565-750
430 x 560
01.102.043.X-001
1 unit
Dimensions in mm:
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
UP = Packaging unit
55
VERTIV™ KNÜRR® ACCESSORIES
19" shelf
fully retractable
MEC00462
19" heavy-duty shelf
fixed
– Perforated utility space.
–Installed as base plate for server or battery.
–Integrated mounting holes, front and rear
for handle or hinged cable routing.
– Perforated to optimize air supply.
–Locks in retracted position (friction lock).
–Quick separator for tool-less removal and decoupling
of shelf.
Material / Finish
– Sheet steel 1.5 mm, electroplated zinc, powdercoated texture.
MEC00120
Color
– Final digit of order number .1: RAL 7035, light grey.
– Final digit of order number .8: RAL 7021 dark-grey.
Material / Finish
– S heet steel, electroplated zinc, powder-coated
texture.
Load rating
– 1000 N static for CW installation.
– 1500 N static for 19" installation.
Color
– F inal digit of order number .1: RAL 7035, light grey.
– F inal digit of order number .8: RAL 7021 dark-grey.
Scope of delivery
– 1 x shelf, fixed, threaded connection.
– 2 x mounting braces.
– 1 x Mounting kit.
Load rating
– 500
N static per item.
Scope of delivery
– 1 x pair of telescopic slides.
– 1 x shelf board.
– 1 x Mounting kit.
MEC20117
How supplied
– I n sets.
MEC20020
Note
BPlease order requisite mounting adapter when
used for Miracel 2/DCM/Smaract 19" server
extrusion.
– Mounting adapter for 19" server extrusions
01.147.640.9 1 Set.
How supplied
– In sets.
Note
Please order requisite mounting adapter when used
for DCM or Miracel 2/Smaract server extrusion.
–M
ounting adapter for 19" server extrusions
01.147.640.9 1 Set.
d
WxL
Order No.
UP
365-565
430 x 360
01.102.040.X-001
1 unit
565-750
430 x 560
01.102.041.X-001
1 unit
d
WxL
For rack type
Order No.
UP
565
467 x 460
MIR2 / DCM / Smaract
01.131.473.X
1 unit
640
467 x 460
MIR2 / DCM / Smaract
01.131.475.X
1 unit
665
467 x 460
MIR2 / DCM / Smaract
01.131.476.X
1 unit
740
467 x 560
MIR2 / DCM / Smaract
01.131.474.X
1 unit
Cable cantilever
MEC20154
MEC88005
–Can be tilted outward from the rear, facilitating easy
access to the rear (only 3 piece).
–For easy mounting in side the rack/on
the shelf; shelf or rack easily attached or decoupled with
spring clip.
–Guarantees defined and kink-free cable
management.
–Minimum space requirement at the back of shelves:
40 mm.
Material / Finish
– Sheet steel, 1.5 mm, zinc passivated.
Scope of delivery
– 1 x cable cantilever.
– 1 x Mounting kit.
How supplied
– In sets.
Dimensions in mm:
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
56
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
UP = Packaging unit
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
Type
Order No.
UP
2-piece
05.040.096.0
1 unit
19" heavy-duty shelf
fully retractable
19" shelf, 2 U
Fixed
– Perforated to optimize air supply.
–Locks in pushed-in and fully retracted position.
–Easy mounting with patented quick-mounting system.
–Installed as base plate for server or battery.
–Installed in racks with fixed 19" components, front.
–Quick and easy mounting on 19" extrusions.
–Also for swing frame in the 19" rack and 19"
enclosure.
MIR00373
Material / Finish
– Sheet
steel, powder-coated texture.
MEC20022
Color
– Final
digit of order number .1: RAL 7035 light-grey.
– F inal digit of order number .8: RAL 7021 dark-grey.
Color
– Final
digit of order number .1: RAL 7035, light grey.
– F inal digit of order number .8: RAL 7021 dark-grey.
Material
– Sheet steel, 1.5 mm.
Load rating
– 1200
N static.
Load rating
– 200 N static.
S
cope of delivery
– 1 x pair of telescopic slides.
– 1 x shelf board.
– 1 x Mounting kit.
Scope of delivery
– 1 x shelf, fixed.
– 1 x Mounting kit.
How supplied
– In sets.
How supplied
– In sets.
MEC20113
Note
Please order requisite mounting adapter when used
for Miracel 2/DCM/Smaract 19" server extrusion.
–M
ounting adapter for 19" server extrusions
01.147.640.9 1Set.
d
WxL
For rack type
Order No.
UP
565-750
412 x 560
MIR2 / DCM / Smaract
01.102.650.X-001
1 unit
MIR00375
W
H
WxL
Order No.
UP
482.6
88.1
442 x 280
01.113.736.X
1 unit
482.6
88.1
442 x 380
01.113.737.X
1 unit
19" shelf, 2 U
Adjustable
Handle
MIR00102
–Installed in racks with adjustable 19" components,
front.
–Quick and easy mounting on 19" extrusions.
–Also for swing frame in the 19" rack and 19"
enclosure.
–Depth can be adjusted in increments of 25 mm.
Material / Finish
– Sheet steel, 1.5 mm, powder-coated texture.
–Suitable for traditional and heavy-duty shelves.
– With M5 internal thread.
MEC20138
Color
– Final digit of order number .1: RAL 7035 light-grey.
– Final digit of order number .8: RAL 7021 dark-grey.
Material
–D
ie-cast aluminum consoles.
– E xtruded aluminum handles.
–C
ap made of ABS UL 94 HB.
Load rating
– 200 N static.
Finish
–H
andle, powder-coated, grey-blue, RAL 5008/ Cap,
light-grey, RAL 7035.
How supplied
– I n sets.
Scope of delivery
– 2 x handles.
MIR00103
W
H
WxL
Order No.
UP
482.6
88.1
442 x 480
01.113.411.X
1 unit
MEC20111
Order No.
UP
00.050.503.1
1 set
Dimensions in mm:
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
UP = Packaging unit
57
VERTIV™ KNÜRR® ACCESSORIES
19" drawer
Installed on the front
19" drawer with lock
–Installed on front 19" extrusions.
–For storing service documents.
– Quick and easy mounting.
SCH00058
Material / Finish
– Drawer,
sheet steel, powder-coated texture;
telescopic slides, Sendzimir zinc-coated.
SCH00057
Color
– F inal digit of order number .1: RAL 7035, light grey.
– F inal digit of order number .8: RAL 7021 dark-grey.
– Installed in racks with fixed 19" components on the
front and rear.
– Fully retractable.
– With lock.
– Locks in retracted position (friction lock).
–Quick separator for tool-less removal and decoupling
of shelf board.
Material / Finish
– Drawer, sheet steel 1.0 mm, powder-coated texture;
telescopic slides, cold rolled steel, Sendzimir zinccoated.
Load rating
– 1 50 N static.
Color
– Final digit of order number .1: RAL 7035 light-grey.
– Final digit of order number .8: RAL 7021 dark-grey..
Scope of delivery
– 1 x 19" drawer with lock, including key.
– 1 x pair of telescopic slides.
– 1 x Mounting kit.
Load rating
– 500 N static.
How supplied
– Pre-assembled.
SCH00053
Scope of delivery
– 1 x 19" drawer with lock, including key.
– 1 x pair of telescopic slides.
– 1 x Mounting kit.
How supplied
– Pre-assembled.
SCH00054
W
H
U
Order No.
482.6
43.6
1
01.102.048.X-001
UP
1 unit
482.6
88.1
2
01.102.048.X-002
1 unit
D
U
WxL
For rack type
Order No.
UP
482.6
132.5
3
01.102.048.X-003
1 unit
565-750
2
412 x 562
MIR2 / DCM / Smaract
01.102.049.X-001
1 unit
565-750
4
412 x 562
MIR2 / DCM / Smaract
01.102.049.X-002
1 unit
19" writing board 1 U
fully retractable
19" keyboard drawer, 1 U
for 19" keyboard
– With handle.
– Can also be used as writing board.
– Locks in retracted position (friction lock).
MEC00118
Material / Finish
– Shelf, sheet steel, 1.0 mm.
– Telescopic slide, cold-rolled steel.
SCH00059
– With hand support.
– With cable strain relief.
– Locks in retracted position (friction lock).
–Quick separator for tool-less removal and decoupling
of drawer.
Material
– Main unit, sheet steel, 1.0 mm.
– Front panel, sheet steel, 1.0 mm.
Color
– Final
digit of order number .1: RAL 7035 light-grey.
– F inal digit of order number .8: RAL 7021 dark-grey.
Color
– Final digit of order number .1: RAL 7035 light-grey.
– Final digit of order number .8: RAL 7021 dark-grey.
Load rating
– 5 00 N static.
Scope of delivery
– 1 x 19" keyboard drawer, 1 U.
– 1 x pair of telescopic slides.
– 1 x Velcro for securing the keyboard.
– 1 x Mounting kit.
Scope of delivery
– 1 x shelf.
– 1 x pair of telescopic slides.
– 1 x Mounting kit.
How supplied
– Pre-assembled.
SCH00055
How supplied
– Pre-assembled.
MEC20118
d
WxL
Order No.
UP
365-565
430 x 360
01.102.045.X-001
1 unit
d
Order No.
UP
565-750
430 x 560
01.102.046.X-001
1 unit
565-750
01.102.047.X-001
1 unit
58
Luminestra LED
Rack lighting
19" keyboard drawer 1 U
with extract for pc mouse
MEC00116
– Heel of hand support.
– Mouse area can be extracted right/left.
– Storage compartment for pc mouse.
– Locks in retracted position (friction lock).
–Quick separator for tool-less removal and
decoupling of drawer.
ELM00058
Dimensions
– Useful
shelf space: measurements without heel of
hand support 372 x 209 x 32 mm.
– Only for rack type Miracel 2 / DCM W 700, W 800.
–Mounted on the basic frame above the vertical
extrusions.
– With LED 4000 Kelvin, 7 watt.
– With on/off rocker switch.
–With 2 m power supply cable and EURO plug.
– Complete with mounting material.
–Only with 123 mm front clearance space.
Color
– White.
Color
– F inal digit of order number .1: RAL 7035 light-grey.
– F inal digit of order number .8: RAL 7021 dark-grey.
Scope of delivery
– 1 x Luminestra rack lamp.
– 2 x mounting brackets.
– 1 x Mounting kit.
Scope of delivery
– 1 x 19" keyboard drawer, 1 U.
– 1 x pair of telescopic slides.
– 1 x heel of hand support.
– 1 x Mounting kit.
How supplied
– Pre-assembled.
W
H
D
Order No.
UP
70
20
555
01.131.227.9
1 unit
Note
Keyboard is not included.
Not compatible with racks, depth 600.
Compact rack lamp
d
Order No.
UP
565-750
01.136.379.X
1 unit
ELM00135
Features
– Magnetic mounting.
– Energy-saving lamp.
– Protective contact socket.
– ON/OFF switch.
– Power supply lead 3 m.
– Cover panel.
Compliance
– VDE ICE.
Document holder
Protection rating
– IP20.
– Self-adhesive; for higher loads use 6 mm holes.
–For DIN A4 documents.
Technical data
–O
perating voltage 230 V / 50-60 Hz.
– L ighting: compact fluorescent tube with integrated
starter.
ower consumption: 11 W ^= 75 W bulb.
–P
– Light intensity: 900 Lm.
– Interference suppression compliant with VDE 0712,
IEC 82.
– Socket: 230 VAC / 16A.
onnections: 3-pole screw clamp, 2.5 mm2 with
–C
strain relief.
Material
– High-impact Polystyrol.
Color
– Grey.
MEC20027
Scope of delivery
– 1 x document holder.
W
L
T
Bestell-Nr.
VE
W
H
D
Order No.
UP
264
236
30
05.016.045.0
1 unit
65
65
365
01.131.465.9
1 unit
Dimensions in mm:
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
UP = Packaging unit
59
VERTIV™ KNÜRR® ACCESSORIES
The right mounting set for every rack type
DCM
MIR2
T-slot
MIR2
Mount.
holes
MIR2
Server
MIR2
Swing
frame
Smaract
T-slot
Smaract
Mount.
holes
Smaract
Server
Double
ProRack
T-slot
Double
ProRack
Mount. holes
ConAct
Name
Order No.
UP
T-Slot mounting
set, M5, wide
05.041.320.9
1 set
Mounting set
Mount. holes M5/
BI 1.5
05.041.321.9
1 set
Mounting set
Mount. holes M5/
BI 2.5
05.041.325.9
1 set
Mounting set dpr
T-slot, M5 narrow
05.041.323.9
1 set
Mounting set dpr
mount. holes M5
05.041.322.9
1 set
Mounting Set,
ConAct M5
05.041.324.9
1 set
Name
Order No.
UP
FP mounting set,
T-slot M5, wide
05.041.335.9
1 set
FP mounting set
Mount. holes M5/
BI 1.5
05.041.336.9
1 set
FP mounting set
Mount. holes M5/
BI 2.5
05.041.337.9
1 set
FP mounting set,
T-slot M5, narrow
05.041.338.9
1 set
Name
Order No.
UP
FP mounting set,
T-slot M5, wide
05.041.340.9
1 set
FP mounting set
Mount. holes M5/
BI 1.5
05.041.341.9
1 set
FP mounting set
Mount. holes M5/
BI 2.5
05.041.342.9
1 set
FP mounting set,
T-slot M5, narrow
05.041.343.9
1 set
The right mounting set for front panel mounting
Model: Z-form screw
DCM
MIR2
T-slot
MIR2
Mount.
holes
MIR2
Server
MIR2
Swing
frame
Smaract
T-slot
Smaract
Mount.
holes
Smaract
Server
Double
ProRack
T-slot
Double
ProRack
Mount. holes
ConAct
The right mounting set for front panel mounting
Model: countersunk screw + rosette
DCM
60
MIR2
T-slot
MIR2
Mount.
holes
MIR2
Server
MIR2
Swing
frame
Smaract
T-slot
Smaract
Mount.
holes
Smaract
Server
Double
ProRack
T-slot
Double
ProRack
Mount. holes
ConAct
The right accessories for every rack type
DCM
MIR2
T-slot
MIR2
Mount.
holes
MIR2
Server
MIR2
Swing
frame
Smaract
T-slot
Smaract
Mount.
holes
Smaract
Server
Double
ProRack
T-slot
Double
ProRack
Mount. holes
ConAct
Name
Order No.
UP
Spring nut, M5
wide
01.350.431.9
1 set
Spring nut, M5
narrow
05.041.503.9
1 set
Spring nut M6
01.350.405.9
1 set
Cage nut M5/BI 1.5 05.041.513.7
1 set
Cage nut M5/BI 2.5 05.041.518.7
1 set
Oval-head screws,
Z-form, M5 x 10
05.041.330.9
1 set
Oval-head screws,
Z-form, M5 x 16
05.041.331.9
1 set
Countersunk
screw M5 x 12 +
rosette
05.041.203.9
1 set
Countersunk
screw M5 x 16 +
rosette
05.041.290.9
1 set
61
VERTIV™ KNÜRR® ACCESSORIES
Mounting tool
for cage nuts
Mounting set; mounting holes
server extrusion M5 / plate, 2.5 mm
for MIR2/DCM®/Smaract®
–Allows easy clipping of cage nuts on extrusions.
–For securing 19" front panels
and 19" components.
M
aterial
– S pring steel.
MIR00114
MEC20126
Scope
of delivery
– 1 x mounting tool.
Order No.
UP
01.130.985.9
1 unit
Scope of delivery
– 100 Käfigmuttern M5 / Blech 2,5 mm.
– 100 Linsenschrauben FormZ M5 x 16.
– 20 Federmuttern M5 breit.
– 20 Zylinderschrauben M5 x 8.
H
ow supplied
– In sets.
T-Slot mounting set, M5, wide
Order No.
UP
05.041.325.9
1 set
for MIR2/Smaract®
–For securing 19" front panels and 19" components.
T-slot mounting set, M5,
narrow for DoubleProRack®
Scope
of delivery
– 100 x spring nuts, M5 wide.
– 100 x oval-head screws, Z-form, M5 x 10.
– 20 x cage nuts M5 /plate, 1.5 mm.
– 20 x cylinder screws, M5 x 8.
MEC20125
H
ow supplied
– In sets.
–For securing 19" front panels
and 19" components.
MEC20127
Order No.
UP
05.041.320.9
1 set
Scope of delivery
– 100 x spring nuts, M5 narrow.
– 20 x oval-head screws, Z-form, M5 x 10.
– 50 x cylinder screws, M5 x 10.
– 30 x oval-head screws, Z-form, M5 x 8.
How supplied
– In sets.
Order No.
UP
05.041.323.9
1 set
Mounting set, M5 / plate, 1.5 mm
for MIR2/Smaract®
Mounting set; mounting holes M5
–For securing 19" front panels and 19" components.
MEC20126
Scope of delivery
– 100 x cage nuts M5 /plate, 1.5 mm.
– 100 x oval-head screws, Z-form, M5 x 16.
– 20 x spring nuts, M5 wide.
– 20 x cylinder screws, M5 x 8.
How supplied
– In sets.
Dimensions in mm:
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
62
Order No.
UP
05.041.321.9
1 set
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
UP = Packaging unit
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
for DoubleProRack®
–For securing 19" front panels
and 19" components.
MEC20126
Scope of delivery
– 100 x cage nuts M5 /plate, 2.5 mm.
– 50 x oval-head screws, Z-form, M5 x 16.
– 40 x spring nuts, M5 narrow.
– 40 x cylinder screws, M5 x 10.
How supplied
– In sets.
Order No.
UP
05.041.322.9
1 set
Mounting holes, mounting set, M5
Front panel mounting set;
mounting holes, M5/plate, 2.5 mm
for MIR2/DCM®/Smaract®/
DoubleProRack®
Type 1
for ConAct®
–For securing 19" front panels
and 19" components.
MEC20096
Scope of delivery
– 50 x cage nuts M5 /plate, 1.5 mm.
– 50 x oval-head screws, Z-form, M5 x 16.
– 50 x cylinder screws, M5 x 8.
– 25 x locking nuts, M5.
–For securing 19" front panels
and 19" components.
MEC20098
Scope
of delivery
–T
ype 1:
50 x cage nuts M5 /plate, 2.5 mm.
50 x oval-head screws, Z-form, M5 x 16.
–T
ype 2:
50 x cage nuts M5 /plate, 2.5 mm.
50 x countersunk screws, M5 x 16.
50 x rosettes.
Type 2
How supplied
– In sets.
Type 1
Order No.
UP
05.041.324.9
1 set
Front panel mounting set, T-slot, M5 wide
for MIR2/Smaract®
MEC20097
H
ow supplied
– In sets.
Model
Order No.
UP
Type 1: Z-form screw
05.041.337.9
1 set
Type 2: Screw + rosette
05.041.342.9
1 set
–For securing 19" front panels and 19" components.
MEC20129
Type 1
Scope
of delivery
–T
ype 1:
50 x spring nuts, M5 wide.
50 x oval-head screws, Z-form, M5 x 10.
ype 2:
–T
50 x spring nuts, M5 wide.
50 x countersunk screws, M5 x 12.
50 x rosettes.
Type 2
MEC20130
Front panel mounting set, T-slot
for DoubleProRack®
–For securing 19" front panels
and 19" components.
MEC20129
H
ow supplied
– In sets.
Type 2
Model
Order No.
UP
Type 1: Z-form screw
05.041.335.9
1 set
Type 2: screw + rosette
05.041.340.9
1 set
S
cope of delivery
–T
ype 1:
50 x spring nuts, M5 narrow.
50 x oval-head screws, Z-form, M5 x 10.
– Type 2:
50 x spring nuts, M5 narrow.
50 x countersunk screws, M5 x 12.
50 x rosettes.
H
ow supplied
– In sets.
MEC20130
Type 1
Front panel mounting set
for MIR® 2/Smaract®/ConAct®
Model
Order No.
UP
Type 1: Z-form screw
05.041.338.9
1 set
Type 2: screw + rosette
05.041.343.9
1 set
– For securing 19" front panels and 19" components.
– Mounting holes.
MEC20098
Scope
of delivery
– Type 1:
50 x cage nuts M5 /plate, 1.5 mm.
50 x oval-head screws, Z-form, M5 x 16.
–T
ype 2:
50 x cage nuts M5 /plate, 1.5 mm.
50 x countersunk screws, M5 x 16.
50 x rosettes.
Type 2
MEC20097
H
ow supplied
– In sets.
Model
Order No.
UP
Type 1: Z-form screw
05.041.336.9
1 set
Type 2: screw + rosette
05.041.341.9
1 set
63
VERTIV™ KNÜRR® ACCESSORIES
Spring nut
Oval-head screw
– To clip on T-slot
where required.
MEC00060
– IEC DIN 967.
Scope of delivery
– 50 x oval-head screws, Z-form.
– Type
1: M5 wide
for Miracel 2 / Smaract.
T-slot size: 10 x 13 mm.
– Type 2: M5 narrow
for DoubleProRack.
T-slot size: 8 x 13 mm.
– Type 3: M6
for Miracel 2 / Smaract.
T-slot size: 10 x 13 mm.
Model
Order No.
UP
M5 x 10
05.041.330.9
1 set
S
cope of delivery
– 50 x spring nuts.
M5 x 16
05.041.331.9
1 set
M6 x 10
05.041.332.9
1 set
M6 x 16
05.041.333.9
1 set
MEC20140
How supplied
– In sets.
H
ow supplied
– In sets.
Model
Order No.
Countersunk screw +
rosette
UP
Type 1: M5 wide
01.350.431.9
1 set
Type 2: M5 narrow
05.041.503.9
1 set
Type 3: M6
01.350.405.9
1 set
– IEC DIN EN ISO 7047.
Scope of delivery
– 50 x countersunk screws.
– 50 x rosettes.
MEC20141
How supplied
– In sets.
Cage nut
– For clipping into extrusions with mounting holes.
MEC20139
– Type
1: Plate, 1.5 mm
for Miracel 2 / Smaract /ConAct.
– Type 2: Plate, 2.5 mm
for Miracel 2 Server /Smaract Server/
DoubleProRack with 19" mounting holes.
Model
Order No.
UP
M5 x 12
05.041.203.9
1 set
M5 x 16
05.041.290.9
1 set
Oval-head screw
self-guiding
Scope of delivery
– 50 x cage nuts.
How supplied
– In sets.
Model
Order No.
UP
M5: Type 1: Plate, 1.5 mm
05.041.513.7
1 set
M5: Type 2: Plate, 2.5 mm
05.041.518.7
1 set
M6: Type 1: Plate, 1.5 mm
05.041.514.7
1 set
M6: Type 2: Plate, 2.5 mm
05.041.519.7
1 set
MEC80020
– DIN 7500.
–Suitable for system accessories fixed on the inside
of the 19" extrusions.
–Suitable for 19" steel and 19" aluminum extrusions.
–Easy screwing.
Scope of delivery
– 50 x oval-head screws, M6x10.
How supplied
– In sets.
Model
Order No.
UP
M6 x 10
05.041.334.9
1 set
Dimensions in mm:
64
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
UP = Packaging unit
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
Oval-head screw
With Phillips head
Distribution box
– IEC DIN EN ISO 7045.
MEC20227
Scope of delivery
– 1 x set of 50 units.
HEI00379
MEC20228
L
Model
Order No.
UP
8
M 5 no washer
05.041.611.8
1 set
12
M 4 no washer
05.041.609.8
1 set
12
M 5 with washer
05.041.613.8
1 set
16
M 5 with washer
05.041.614.8
1 set
16
M 6 with washer
05.041.616.8
1 set
Cylinder screw
With hexagon head
– IEC ISO 4762 (modified).
MEC20226
–For mounting trade-standard installation
technology DIN rail components, such as fuses,
clamps, relays, etc.
–When installed, the mounting level can be pulled out
at the front and locked in position, significantly
simplifying the wiring of the individual components.
Not available for “fixed installation” model. Up on
request: Delivered assembled and wired. Further
versions and models up on request.
–Installation space for up to 22 pieces of equipment
with 18 mm width each.
–Mounting of the TS35 DIN rail on several levels with
simple plug-in connection.
Not available for “fixed installation” model.
–"Snap-in" mounting of DIN rail components.
–Easy access to the protective grounding and neutral
conductor rails from the front.
–Various positioning options available for N and PE
rails. Not available for “fixed installation” model.
–Cable entry at the rear via double brush strip
(optionally via bushing sockets).
–Cable strain relief on the inside and therefore
accessible from the front.
–Labeling strips on the front, above and below the
installation space.
–Installation options available for power distribution
with 230 V AC, but also in the low-voltage range (e.g.
48 V DC).
– 19" slot-in, 3 U, depth 150 mm.
Material / Finish
– Panels powder-coated texture,
RAL 7035 light-grey.
– Main unit, sheet steel, zinc-passivated.
Scope of delivery
– 1 x set of 50 units.
L
Model
Order No.
UP
8
M5
05.041.574.8
1 set
8
M 5 microencapsulated
05.041.575.9
1 set
Scope of delivery
– 1 x distribution box.
– Including N and PE rails, cable entry, cable strain
relief, empty panel covers and grounding set.
How supplied
– Fully assembled.
Tensiloc nut
Material
– Steel nickel-plated.
MEC20225
Scope of delivery
– 1 x set of 50 units.
Model
Order No.
UP
M5
05.041.533.8
1 set
W
H
D
U
19"
Model
Order No.
UP
482.6
134
150
3
•
Pull-out
03.013.385.1
1 unit
482.6
134
150
3
•
Fixed
03.013.470.1
1 unit
HEI20282
65
VERTIV™ KNÜRR® ACCESSORIES
Door contact switch
1 equipotential bonding bar
– On/off switch, 4 A, 230 V ~.
–Activated by opening and closing door.
Scope of delivery
– 1 x door contact switch (not wired).
– 1 x mounting bracket.
– 1 x Mounting kit.
ELM00137
ELM00114
Order No.
UP
01.110.722.9
1 unit
– For central grounding of all protective conductors.
– With sealable cover.
–Connection options:
1 x round conductor 8 – 10 mm Ø
1 x flat conductor up to 30 mm wide or round
conductor 8 – 10 mm Ø.
–7 x single or multi-wire conductors
up to 16 mm2 or fine-wire conductors
up to 10 mm2.
Material
– Base plate and cover plate, high-impact plastic.
– Brass nickel-plated contact strip.
Scope of delivery
– 1 x equipotential bonding bar.
Cable junction box
– For 230 V electrical installation on-site.
– As fixed-location exchange point.
– Quick and easy mounting.
Order No.
UP
01.117.524.3
1 unit
Scope of delivery
– 1 x cable junction box.
Grounding bar
–For safe grounding or potential equalization of
equipments and components.
Material
– Electrolyte copper 9 x 9.
ELM00033
ELM00068
Scope of delivery
– 1 x grounding bar.
– 2 x brackets.
– 1 x Mounting kit.
ELM00034
Order No.
UP
00.078.720.9
1 unit
Modular terminal box
–
–
–
–
ELM00128
U
Model
Order No.
UP
24
For DoubleProRack
01.240.546.9
1 unit
21
For DoubleProRack
01.240.545.9
1 unit
18
For DoubleProRack
01.240.544.9
1 unit
15
For DoubleProRack
01.240.543.9
1 unit
45
For Miracel 2 / DCM
01.110.709.9
1 unit
41
For Miracel 2 / DCM
01.110.708.9
1 unit
12
For Miracel 2 / DCM
01.110.703.9
1 unit
For 230V electrical installation on-site.
With series terminal, 8 x 42.
Pg 11/16 entry.
IP 54.
Contact clamp
–Enables safe connection of equipment
and components to grounding bar.
– For cables up to 25 mm2.
Material
– High-impact, fire-resistant polystyrene.
Scope of delivery
– 20 x contact clamps.
Scope of delivery
– 1 x modular terminal box.
– 4 pg compression glands, pg11.
DOP20016
Order No.
UP
Order No.
UP
01.117.521.9
1 unit
01.110.715.9
20 units
Dimensions in mm:
66
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
UP = Packaging unit
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
VERTIV™ KNÜRR® CABLE MANAGEMENT
Vertiv™ Knürr® Cable Management
Features
Allows for prescribed cable radii.
Components are easy to secure and
use.
Components feature addition
functions.
Extensive use of reusable Velcro strips
precludes cable strain.
Global networking is continuing to grow, meaning users are
in need of an intelligent cable management solution.
To meet this demand, Vertiv Knürr offers a range of products and solutions for server racks,
active and passive network racks, as well as special racks.
Our range not only allows you to quickly and easily set up and dismantle racks, it also makes it
much simpler to troubleshoot problems in your systems and expand your systems. Our cable
management components are all based on a number of key principles: Simple and selfexplanatory operation, versatile application options, a clear structure, and a cost-efficient
design.
Thanks to the Vertiv Knürr cable management system, your rack will be equipped for the future
and will save you time and money for the long term.
No blockage of airflow within the rack.
67
VERTIV™ KNÜRR® KABELMANAGEMENT
Vertiv™ Knürr® Cable Management
Terminology
Laying cables involves ensuring that
mechanical stresses are completely avoided.
B
ending load
The bending radii may never fall below the values
provided by the cable manufacturer in the respective
data sheets. Where excessive bending occurs,
the cables' electrical properties are impaired, and
transmission bandwidths and ranges are adversely
affected. If manufacturer specifications are not available,
then the following rule of thumb applies: loose cabling
should be at least 15 times the external cable diameter
and fixed cabling at least 10 times the external cable
diameter.
MEC20064
Buckling load
Extreme bending loads can cause the cable to break.
MEC20084
MEC20086
68
LIG00021
Tensile load
This is determined solely by the copper cross-section of
the conductor, as all other materials are too soft. The
cable may not be exposed to stress exceeding 50 N/
mm2 (Cu cross-section) as this causes the conductors
to stretch which reduces the cross-section. If higher
"pulling" forces are required, cables with additional
strain-reduction elements must be used.
Compressive stress
Compressive stress is caused by loads bearing down
from above, fixed clamping or sharp cable kinking and
must always be avoided, as otherwise the "loose" cable
structure changes and electrical transmission properties
are impaired.
Torque strains (twisting)
Cables must never be subjected to torque strains, as
they cause cable elements to shift and change their
position relative to each other, thereby impairing
transmission properties.
Vertiv™ Knürr® Cable Management
Proper Usage
Various components for fiberglass and
copper cables – especially fastening options such as
Velcro and cable bundling using different colored strips
– guarantee transparent cable management, providing
an optimal starting point for both intelligent network
expansion and ideal service convenience. (1)
Special attention has been paid to ensuring that all
cable management components can be fastened with
Velcro strips which eliminate cable strain and can be
reused at any time. Velcro cable ties also aid the
installation technician as they are easily manageable,
using pinch-free cable bundling. (2)
Excess cable is stored separately from the patch
fields while remaining easily accessible. Copper cable
excess can be stored separately from fiber glass excess
within the Knürr rack systems: the copper cables are
stored on the side while the more sensitive fiberglass
cables are stored in a drawer at the front. (3)
A closer look at the individual products reveals their
outstanding versatility. The cable-routing
multifunctional brace, for example, not only provides the
option of routing cables both horizontally and vertically
using Velcro or cable ties, but additionally allows
numerous components to be mounted with screws and
caged nuts. These caged nuts can also be shifted in a
slot with room for play, so that every mounting
dimension is accommodated. (4)
1. MEC20082
2. MEC20070
3. MEC20099
3. MEC20079
4. MEC20077
4. MEC20091
5. MEC20071
69
VERTIV™ KNÜRR® CABLE MANAGEMENT
Vertiv™ Knürr® Cable Management
Overhead Cabling
Vertiv's Overhead Cabling Solution
Features
Modular, extremely flexible.
The Vertiv Knürr overhead cable management system is a complete, modular system which
offers a variety of cable-tray installment options. The components are very flexible and can be
installed on site or modified with ease, to accommodate
cable-management requirements that differ from rack to rack. This extremely sturdy and
robust system can withstand high stress levels and is suitable for any application. Combined
with other items from the Knürr cable-management product range, it provides a
comprehensive solution that delivers proper cable bend radii.
Robust construction.
Includes integrated radius for cable
entry into rack.
New cover panel with lateral cable
entry.
Selection of cable throughs and mesh
cable trays.
Suitable for Vertiv Knürr DCM and
Vertiv Knürr MIR.
Includes Vertiv SmartAisle™ enclosure.
Various combinations possible.
Example of Overhead Configuration
G
E
E
C
D
B
G
F
A
C
D
B
A
Legend
A
Support bracket
B
Mounting bracket
C
Center panel insert
D
Transitional cover
E
End panel insert
F
Connecting panel insert
G
Cover plate
H
Support bracket cross-cabling
F
D
J
J
B
I
I
Cover cross-cabling
J
New cover panel with lateral cable entry
70
H
3 x Vertiv Knürr DCM
B800 T1200
1 x Liebert® CRV B300 T1200
180
0m
m
4 x Vertiv Knürr DCM
B600 T1200
1 x Liebert® CRV B300 T1200
Configuration Assistant
Sample Order
Name
Item
– Left rack suite
Vertiv Knürr DCM B800 T1200
3
01.147.722.8
New cover panel with
lateral cable entry
3
01.147.579.8
1
CR0302XXX-XXXXXX
4
05.045.005.X
2
2
3
3
3
3
1
1
05.045.011.X
05.045.015.X
05.045.023.X
05.045.024.X
05.045.031.X
05.045.032.X
05.045.041.X
05.045.042.X
1
05.045.045.X
G
2
05.045.047.X
Vertiv Knürr DCM B800 T1200
4
01.147.714.8
New cover panel
with lateral cable entry
4
01.147.574.8
1
CR0302XXX-XXXXXX
4
05.045.005.X
2
8
4
4
4
4
1
1
05.045.011.X
05.045.012.X
05.045.021.X
05.045.022.X
05.045.031.X
05.045.032.X
05.045.041.X
05.045.042.X
2
05.045.045.X
2
05.045.047.X
1
1
05.045.052.X
05.045.053.X
J
Liebert® CRV B300 T1200
Support bracket
A
B
Mounting bracket
C
Center panel insert
Transitional cover D
End panel insert
E
F
Connecting panel insert
Cover plate
– Right rack suite
J
Liebert® CRV B300 T1200
Support bracket
Mounting bracket
A
B
C
Center panel insert
Transitional cover
End panel insert
D
E
Connecting panel insert
Cover plate
– Cross-cabling
G
Support bracket H
F
Mounting bracket
B
1
05.045.015.X
Transitional cover
D
2
05.045.032.X
1
05.045.057.X
Cover
I
71
VERTIV™ KNÜRR® CABLE MANAGEMENT
Required Data for Overhead Cabling
Example
– Width of racks in the rack suite (300, 600 or 800 mm)
Rack width (W) = 800 mm
– Depth of racks in the rack suite (1000 to 1200 mm)
Rack depth (D) = 1200 mm
– Number of racks in one rack suite
– Aisle width (Standard dimensions 1200, 1500 and 1800 mm ± 50 mm) – for cross-cabling
Aisle width (AW) = 1800 mm
– Color light-grey RAL 7035 or dark-grey RAL 7021
Dark-grey RAL 7021
Prerequisites for Overhead Cabling
Cover panel
J
DCM20079
MIR2 / DCM
cover panel short
K
with lateral cable entry
– With lateral cable entry on both sides
(sliding plates).
–For orderly cable management with in the rack.
– Optional brush strips.
– For covering the front overhead area; the rest
remains open.
–Facilitates unobstructed cable entry inside the rack.
Material
– Sheet steel, 1.5 mm.
Material
– Sheet steel, 1.5 mm.
Finish / Color
– Final digit of order number .1:
powder-coated, RAL 7035.
– Final digit of order number .8:
powder-coated, RAL 7021.
Finish / Color
– Powder-coated texture, RAL 7021, dark-grey.
Scope of delivery
– 1 x cover panel, short.
– 1 x Mounting kit.
How supplied
– In sets.
DCM20081
Scope of delivery
– 1 Deckel mit seitlicher Kabeleinführung.
– Montagematerial.
How supplied
– In sets.
DCM20080
WRack
DRack
For rack type
Order No.
UP
WRack
L
For rack type
Order No.
600
1000
MIR2 / DCM
01.147.572.X
1 unit
600
250
MIR2 / DCM
01.147.268.8
1 unit
600
1100
MIR2 / DCM
01.147.573.X
1 unit
800
250
MIR2 / DCM
01.147.269.8
1 unit
600
1200
MIR2 / DCM
01.147.574.X
1 unit
800
1000
MIR2 / DCM
01.147.577.X
1 unit
800
1100
MIR2 / DCM
01.147.578.X
1 unit
800
1200
MIR2 / DCM
01.147.579.X
1 unit
Dimensions in mm:
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
72
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
UP = Packaging unit
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
UP
A
C
Support bracket
Center panel insert
–Secures corner piece at the top of the rack.
–Quick and easy mounting.
–Suitable for both MIR2 and DCM racks.
–Includes screw for securing the mounting brackets,
transitional cover and end panel inserts.
–Secured on mounting bracket.
–Quick and easy mounting.
–With 25 mm radius for bending the cables.
MEC20200
Material
– Sheet steel 2.0 mm.
MEC20205
Finish
– Final digit of order number .1:
powder-coated, RAL 7035 light-grey.
– Final digit of order number .8:
powder-coated, RAL 7021 dark-grey.
Scope of delivery
– 2 x support brackets.
– 1 x Mounting kit.
Material
– Sheet steel, 1.5 mm.
Finish
– Final digit of order number .1: powder-coated, RAL
7035 light-grey.
– Final digit of order number .8: powder-coated, RAL
7021 dark-grey.
Scope of delivery
– 1 x center panel insert.
– 1 x Mounting kit.
How supplied
– In sets.
How supplied
– In sets.
MEC20204
MEC20201
W/L
WRack
R
For rack type
Order No.
UP
200
600
25
MIR2 / DCM
05.045.021.X
1 set
H
DRack
For rack type
Order No.
UP
600
600
25
MIR2 / DCM
05.045.022.X
1 set
44
1000
MIR2 / DCM
05.045.003.X
1 set
200
800
25
MIR2 / DCM
05.045.023.X
1 set
600
800
25
MIR2 / DCM
05.045.024.X
1 set
44
1100
MIR2 / DCM
05.045.004.X
1 set
44
1200
MIR2 / DCM
05.045.005.X
1 set
B
Transitional cover
from rack to rack
D
Mounting brackets
–Secured on support bracket.
–Quick and easy mounting.
–With 25 mm radius for bending the cables.
–Secured on support bracket.
–Quick and easy mounting.
–Separate cable trays.
Material
– Sheet steel 1.0 mm.
Finish
– Final digit of order number .1:
powder-coated, RAL 7035 light-grey.
– Final digit of order number .8:
powder-coated, RAL 7021 dark-grey.
Scope of delivery
– 2 x mounting brackets.
– 1 x Mounting kit.
How supplied
– In sets.
MEC20206
MEC20202
Material
– Sheet steel, 1.5 mm.
Finish
– Final digit of order number .1: powder-coated, RAL
7035 light-grey.
– Final digit of order number .8: powder-coated, RAL
7021 dark-grey.
Scope of delivery
– 1 x transitional cover.
– 1 x Mounting kit.
How supplied
– In sets.
MEC20203
MEC20212
W/L
H
For rack type
Order No.
UP
300
90
MIR2 / DCM
05.045.011.X
1 set
W/L
R
For rack type
Order No.
UP
600
90
MIR2 / DCM
05.045.012.X
1 set
200
25
MIR2 / DCM
05.045.031.X
1 set
600
25
MIR2 / DCM
05.045.032.X
1 set
800
90
MIR2 / DCM
05.045.013.X
1 set
2400
90
MIR2 / DCM
05.045.015.X
1 set
3000
90
MIR2 / DCM
05.045.016.X
1 set
73
VERTIV™ KNÜRR® KABELMANAGEMENT
E
G
End panel insert
Cover plate
–Secured on support bracket.
–Quick and easy mounting.
–Completes cable trays.
MEC20207
–For covering the space between
the center panel inserts and transitional covers.
–Quick and easy mounting.
Material
– Sheet steel 1.0 mm.
Finish
– Final digit of order number .1: powder-coated, RAL
7035 light-grey.
– Final digit of order number .8: powder-coated, RAL
7021 dark-grey.
Material
– Sheet steel 1.0 mm.
Finish
– Final digit of order number .1: powder-coated, RAL
7035 light-grey.
– Final digit of order number .8: powder-coated, RAL
7021 dark-grey.
MEC20209
Scope of delivery
– 2 x end panel inserts.
– 1 x Mounting kit.
Scope of delivery
– 10 x cover plates.
– 1 x Mounting kit.
How supplied
– In sets.
How supplied
– In sets.
MEC20215
MEC20214
W/L
For rack type
Order No.
UP
200
MIR2 / DCM
05.045.041.X
1 set
600
MIR2 / DCM
05.045.042.X
1 set
F
L
W
For rack type
Order No.
UP
229
183
MIR2 / DCM
05.045.047.X
1 set
Option
Mesh cable tray
–Secured on support bracket.
–Quick and easy mounting.
Connecting panel insert
MEC20208
–For joining mounting brackets.
–Quick and easy mounting.
Material
– Round steel, d = 4.5 mm.
Material
– Sheet steel, 1.5 mm.
Finish
– Zinc-passivated.
Scope of delivery
– 1 x mesh cable tray.
– 1 x Mounting kit.
How supplied
– In sets.
MEC20218
Finish
– Final digit of order number .1: powder-coated, RAL
7035 light-grey.
– Final digit of order number .8: powder-coated, RAL
7021 dark-grey.
Scope of delivery
– 10 x connecting panel inserts.
– 1 x Mounting kit.
How supplied
– In sets.
B
L
H
For rack type
Order No.
UP
200
3000
54
MIR2 / DCM
05.045.061.9
1 set
600
3000
54
MIR2 / DCM
05.045.062.9
1 set
MEC20213
W
H
For rack type
Order No.
UP
64
86
MIR2 / DCM
05.045.045.X
1 set
Dimensions in mm:
74
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
UP = Packaging unit
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
Support bracket
Cross-cabling
H
–For cable management at the top
between rack suites.
–Quick and easy mounting.
–Includes screw for securing the mounting brackets,
transitional covers and cover plates.
MEC20210
MEC20216
Material
– Sheet steel 2.0 mm.
Finish
– Final digit of order number .1:
powder-coated, RAL 7035 light-grey.
– Final digit of order number .8:
powder-coated, RAL 7021 dark-grey.
Scope of delivery
– 2 x support brackets, cross-cabling.
– 1 x Mounting kit.
How supplied
– In sets.
H
WRack
For rack type
Order No.
166
600
MIR2 / DCM
05.045.052.X
UP
1 set
166
800
MIR2 / DCM
05.045.053.X
1 set
Cross-cabling
Cover
I
–Provides support for cables and
covers the space between the rack suites.
–Secured on mounting bracket.
–Quick and easy mounting.
MEC20211
Material
– Sheet steel 1.0 mm.
Finish
– Final digit of order number .1:
powder-coated, RAL 7035 light-grey.
– Final digit of order number .8:
powder-coated, RAL 7021 dark-grey.
Scope of delivery
– 5 x cover plates.
– 1 x Mounting kit.
How supplied
– In sets.
MEC20217
L
W
For rack type
Order No.
UP
200
200
MIR2 / DCM
05.045.055.X
1 set
200
600
MIR2 / DCM
05.045.056.X
1 set
600
600
MIR2 / DCM
05.045.057.X
1 set
75
VERTIV™ KNÜRR® CABLE MANAGEMENT
Vertiv™ Knürr® Cable Management
Features
– Organized cabling of jumper cables.
– Suitable depends on the model, for 19" Vertiv Knürr, DCM® and MIR2® Racks.
– Also available optionally as cold/warm partitioning.
– Cutouts for cabling from front to back.
– Lightweight plastic construction of the cable fingers ensures durability and simple installation (clip-on).
– Distance between fingers provides sufficient space for all patch cords.
– Rounded edges on the fingers protect cables against damage.
Cable manager models
T
ype 1: Standard (open cutouts).
Type 2: Version with brush strips in cutouts for cable routing towards the rear.
Type 1
Type 2
Type 3
T
ype 3: Version with sheet-steel cover plates in cutouts as part of the cold/warm partitioning.
Technical data and required recess depths
Vertiv Knürr DCM®
Vertiv Knürr DCM
Vertiv Knürr MIR2®
h
pt
de
ss m
ce m
Re 145
≥
h
pt
de
ss m
ce 0 m
Re 28
≥
h
pt
de
ss m
ce m
Re 145
≥
On
est
Requ
81
mm
60 mm
76
93 mm
Recess depth
≥ 145 mm
Recess depth
≥ 280 mm
Recess depth
≥ 145 mm
81 mm
Vertiv™ Knürr® DCM® cable manager, vertical
DCM20118
Description
– Left and right models (2 cable managers)
included in the delivery.
– Ideal for organizing cabling of jumper cables (copper
and fiber optic cables).
– Retrofitting is possible.
– Prepared for full cold/warm partitioning.
– Cable fingers can be easily installed (clipped on).
– Cabling towards the rear through rubber bushings or
cutouts.
– Can be used for recess depths from 145 mm.
Material / Finish
– Cable duct: Sheet steel, 2.0 mm.
Final digit of order number .1: powder-coated,
RAL 7035 light-grey.
Final digit of order number .8: powder-coated,
RAL 7021 dark-grey.
– Cable fingers: Polyamide (UL 94 V-0), black.
Scope of delivery
– 1 x cable duct, left.
– 1 x cable duct, right.
– 4 x rows with cable fingers.
– 4 x rubber bushings.
– 1 x Mounting kit.
How supplied
– In pairs (cable fingers unassembled).
Remarks
– Only for DCM Rack.
WRack
HRack
U
Recess depth
Cutout size
Order No.
UP
800
2000
42
Starting from 145 mm
66 x 100 mm
05.045.102.X
1 pair
800
2200
47
Starting from 145 mm
66 x 100 mm
05.045.103.X
1 pair
DCM20119
DCM cover panel for
vertical cable manager
DCM20120
DCM20121
DCM/MIR2® kit for air partitioning for vertical cable manager
–Suitable for DCM and MIR2 racks.
–Separates the cold and hot areas with in the rack.
–Prevents hot-spots (air recirculation).
– For only 1 cable manager, i. e.,
2 kits required for B800 rack.
–Covers the vertical cable manager.
–Tool-less fastening – clips onto cable finger.
–Can be swiveled on both sides and removed
completely.
Material / Finish
– Cover: sheet steel, 2.0 mm.
Final digit of order number .1:
powder-coated, RAL 7035 light-grey.
Final digit of order number .8:
powder-coated, RAL 7021 dark-grey.
– Clip: polyamide (UL 94 V-0), black.
Scope of delivery
– 2 x covers.
– 8 x clips.
How supplied
– In sets (clips pre-assembled).
DCM20117
Material / Finish
– Bottom plate, cover plate: sheet steel, 1.0 mm.
Final digit of order number .1: powder-coated,
RAL 7035 light-grey.
Final digit of order number .8: powder-coated,
RAL 7021 dark-grey.
– High-density foam: PUR foam (UL94 HF-1).
Scope of delivery
– 1 x bottom plate.
– 6 x covers for cable routing.
– 1 x Foam element, side.
– 1 xFoam element, top.
– 1 x Mounting kit.
How supplied
– In sets.
Remarks
– For DCM and MIR2 Rack.
W
H
U
Order No.
UP
WRack
U
Order No.
UP
55
927
42
05.045.112.X
1 set
800
42 and 47
05.045.132.X
1 set
55
1038
47
05.045.113.X
1 set
77
VERTIV™ KNÜRR® CABLE MANAGEMENT
Vertiv™ Knürr® MIR2® – Cable Manager, Vertical
Left and right models (2 cable managers) included in
the delivery.
Ideal for organizing cabling of jumper cables
(copper and fiber optic cables).
– Retrofitting is possible.
– Prepared for full cold/warm partitioning.
– Cable fingers can be easily installed
(clipped on).
– Cabling towards the rear through
rubber bushings or cutouts.
Can be used for recess depths from 145 mm.
Standard inclusion
– 1 x cable duct, left.
– 1 x cable duct, right.
– 4 x rows with cable fingers.
– 4 x rubber bushings.
– 1 x Mounting kit.
Delivery
– In pairs (cable fingers unassembled).
Note
For MIR2 only.
Material / Finish
– Cable duct: Sheet steel, 2.0 mm.
Final digit of order number .1:
powder-coated, RAL 7035 light-grey.
Final digit of order number .8:
powder-coated, RAL 7021 dark-grey.
– Cable fingers: Polyamide (UL 94 V-0), black.
h
pt
de
ss m
ce m
Re 145
≥
W Rac
H Rac
U
Recess depth
Cutout size
Order No.
Up
800
2000
D
42
Starting from 145 mm
81 x 100 mm
05.045.152.x
1 pair
800
2200
47
Starting from 145 mm
81 x 100 mm
05.045.153.x
1 pair
Rangiertiefe
≥ 145 mm
81 mm
Vertiv Knürr MIR2 – Cover Panel for Vertical Cable Manager
For only 1 cable manager, i. e., 2 kits required for
B800 rack.
– Covers the vertical cable manager.
– Tool-less fastening – clips onto cable finger.
– Can be swiveled on both sides and removed completely.
78
U
Delivery
– In sets (clips pre-assembled).
Note
For MIR2 only.
Material / Finish
– Cover: sheet steel, 2.0 mm.
Final digit of order number .1:
powder-coated, RAL 7035 light-grey.
Final digit of order number .8:
powder-coated, RAL 7021 dark-grey.
– Clip: polyamide (UL 94 V-0), black.
D
Standard inclusion
– 2 x covers.
– 8 x clips.
W
H
Order No.
Up
55
927
42
Model
Cutout size
05.045.114.x
1 set
55
103
47
05.045.115.x
1 set
MIR2® / DCM® 19" cable manager, horizontal
DCM20112
Description
– 1 U and 2 U models.
– For organized cabling of jumper cables
(copper and fiber optic cables).
– Front-mounting on 19" extrusions.
– Cable fingers can be easily installed (clipped on).
– Can be used for recess depths from 145 mm.
Scope of delivery
– 1 x cable duct.
– 2 x rows with cable fingers.
– 1 x Mounting kit.
How supplied
– In sets (cable fingers unassembled).
Material / Finish
– Cable duct: sheet steel, 2.0 mm.
Final digit of order number .1:
powder-coated, RAL 7035 light-grey.
Final digit of order number .8:
powder-coated, RAL 7021 dark-grey.
– Cable fingers: polyamide (UL 94 V-0), black.
W
U
Recess depth
Order No.
UP
483
1
Starting from 145 mm
05.045.120.X
1 unit
483
2
Starting from 145 mm
05.045.122.X
1 unit
DCM20114
MIR2 / DCM Cover for
19" horizontal cable manager
DCM20113
DCM20115
MIR2 / DCM Brush strips for
vertical cable manager
–Upgrade kit for vertical cable manager
for routing cables toward the rear.
–Inserted in openings in cable duct (1 pair of brushes
per opening).
–Covers the horizontal cable managers.
–Tool-less fastening – clips onto cable finger.
–Can be swiveled on both sides and removed
completely.
Material / Finish
– Cover: sheet steel, 2.0 mm.
Final digit of order number .1:
powder-coated, RAL 7035 light-grey.
Final digit of order number .8:
powder-coated, RAL 7021 dark-grey.
– Clip: polyamide (UL 94 V-0), black.
Scope of delivery
– 1 x cover.
– 4 x clips.
How supplied
– In sets (clips pre-assembled).
MIR20093
Scope of delivery
– 3 x pairs of brushes (length: 99 mm).
How supplied
– In sets.
DCM20122
W
H
U
Order No.
UP
483
20
1
05.045.121.X
1 set
483
65
2
05.045.123.X
1 set
L
for cutouts
Order No.
UP
99
66 x100 mm
05.045.130.9
1 set
Dimensions in mm:
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
UP = Packaging unit
79
VERTIV™ KNÜRR® CABLE MANAGEMENT
DCM® kit for cascading; vertical
cable manager
MIR2® kit for cascading; vertical
cable manager
–Separates individual cable groups.
–Tool-less fastening – clips onto cable finger.
–Protects the cables and can be used for labeling.
DCM20116
–For separating individual cable groups.
–Tool-less fastening – clips onto cable finger.
–Protects the cables and can be used for labeling.
Material / Finish
–C
ascade: sheet steel, 2.0 mm.
Powder-coated texture, RAL 7021 dark-grey.
–C
lip: polyamide (UL 94 V-0), black.
MIR20454
Material / Finish
– Cascade: sheet steel, 2.0 mm. Powder-coated
texture, RAL 7021 dark-grey.
– Clip: polyamide (UL 94 V-0), black.
Scope of delivery
– 10 x cascades.
– 20 x clips.
Scope of delivery
– 10 x cascades.
– 20 x clips.
How supplied
– In sets (clips pre-assembled).
How supplied
– In sets (clips pre-assembled).
W
H
Order No.
UP
W
H
Order No.
UP
55
10
05.045.136.8
1 set
76
10
05.045.137.8
1 set
19" cable routing board
1U
MEC00110
Type 1
19" cable routing board,
flexible, 1 U
–For orderly cable routing.
–Enables safe and secure cable routing of copper and
fiberglass cables.
MEC20041
Material / Finish
–T
ype 1: Front plate, sheet steel, 1.5 mm, powder
coated.
–T
ype 2: Front plate, sheet steel, 1.0 mm, powder
coated.
MEC20014
Type 2
MEC20103
Type 1
Material / Finish
– Front plate, sheet steel, 1.5 mm, powder coated.
– Cable routing bracket, round steel, d = 5 mm, zincpassivated.
MEC20102
Color
– F inal digit of order number .1: RAL 7035, light grey.
– F inal digit of order number .8: RAL 7021 dark-grey.
Color
– Final digit of order number .1: RAL 7035, light grey.
– Final digit of order number .8: RAL 7021 dark-grey.
External dimensions
Cable routers (a x b):
– 1 U: 82 x 43 mm.
– 2 U: 102 x 82 mm.
External dimensions
Cable routing:
–T
ype 1: 55 x 22 mm, plastic.
–T
ype 2: 95 x 32 mm, steel.
Scope of delivery
– 1 x 19" front plate.
– 5 x cable routers.
MEC20104
– For orderly cable routing.
safe and secure cable routing of copper and
– Enables
fiberglass cables.
MEC20076
Type 2
Scope of delivery
– 1 x front plate.
– 5 x cable routing boards.
How supplied
– Pre-assembled.
How supplied
– Pre-assembled
Note
Please also order mounting material for front plates.
Note
Please also order mounting material for front plates.
W
U
Jumpering space
Model
Order No.
UP
W
U
Jumpering space
Model
Order No.
UP
483
1
from 80 mm
Type 1
05.040.111.X
1 unit
483
1
from 100 mm
Type 1
05.040.100.X
1 unit
483
1
from 123 mm
Type 2
01.117.144.X
1 unit
483
2
from 120 mm
Type 2
05.040.101.X
1 unit
80
Fiber optic cable routing panel
1U
MEC20081
– For orderly cable routing.
–Enables safe and secure cable routing of fiber optic
cables.
–Optionally with cover plates to protect the cables
and can be used for labeling.
MEC20105
Cable trough
– For orderly cable management in the
MIR2 and DCM racks.
–Cables secured with Velcro strips or cable ties.
–9 mm slit width for securing various parts to caged
nuts.
Material / Finish
– Fiber optic cable routing panel: Sheet steel 1,5mm,
powder-coated texture.
– Cover Accessories: Aluminium 2,5mm, powdercoated texture.
MEC20224
Color
– Final digit of order number .1: RAL 7035, light grey.
– Final digit of order number .8: RAL 7021 dark-grey.
Scope of delivery
– 1 x 19" cable routing board.
Color
– Final digit of order number .1: RAL 7035 light grey.
– Final digit of order number .8: RAL 7021, dark-grey.
Scope of delivery
– 1 x cable trough.
– 1 x Mounting kit.
How supplied
– In sets.
MEC20058
How supplied
– Single items.
Note
If required, please also order Velcro rolls.
Note
Please also order mounting material for front plates
and cover.
Not suitable for rack widths of 600 mm and 700 mm
(asymmetrical).
W
U
483
1
Material / Finish
– Sheet steel, 1.5 mm, zinc passivated, powdercoated.
MEC20067
H
w
Model
Order No.
UP
2000
100
For MIR2 and DCM racks
05.040.251.X
1 set
2200
100
For MIR2 and DCM racks
05.040.252.X
1 set
2000
150
For MIR2 and DCM racks
05.040.254.X
1 set
Model
Order No.
UP
Cable routing board
05.040.050.X
1 unit
2200
150
For MIR2 and DCM racks
05.040.255.X
1 set
Accessories: cover
05.040.051.X
1 unit
2000
200
For MIR2 and DCM racks
05.040.257.X
1 set
2200
200
For MIR2 and DCM racks
05.040.258.X
1 set
19" cable through
Cable clamping bar
– For organized cable management at the
19" front plate.
– Mounting possible on front plates.
–Cables can be fastened with Velcro.
MEC20049
Material / Finish
– Sheet steel, 1.5 mm, powder-coated texture.
Color
– Final digit of order number .1: RAL 7035, light grey.
– Final digit of order number .8: RAL 7021 dark-grey.
Scope of delivery
– 1 x cable through.
–Clips onto the C extrusion rail.
Material
– Polyamide, black.
Scope of delivery
– 1 set of 10 cable clamping bars.
How supplied
– In sets.
MEC00114
Order No.
UP
01.130.869.9
10 units
How supplied
– Single items.
MEC20063
Note
Please also order mounting material for front plates
and Velcro rolls.
Dimensions in mm:
W
D
U
Order No.
UP
483
100
1
05.040.055.X
1 unit
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
UP = Packaging unit
81
VERTIV™ KNÜRR® CABLE MANAGEMENT
U clamp
Assembly crossbar
–Reduces cabling strain and permits
individual routing of cables and lines.
– Clamping range, 8–64 mm.
MIR00096
MEC20136
Type 1
MEC20120
Type 1
Material
– Steel / plastic.
Scope of delivery
– 25 x U clamps.
– 25 x clamping saddles.
How supplied
– In sets.
ELM00086
Clamping range
Order No.
UP
8–12 mm
05.040.150.9
1 unit
12–16 mm
05.040.151.9
1 unit
16–22 mm
05.040.152.9
1 unit
22–28 mm
05.040.154.9
1 unit
34–40 mm
05.040.155.9
1 unit
46–52 mm
05.040.157.9
1 unit
M5 threaded plate
– Cable management with Velcro strips.
–Universal mounting option for installation
accessories, socket strips, telecommunication
installation units, mounting panels, etc.
–For side and cross installation.
Material / Finish
– Sheet steel 1.5 mm, powder-coated texture.
Color
– Final digit of order number .1: RAL 7035 light-grey.
– Final digit of order number .8: RAL 7021 dark-grey.
Scope of delivery
– 1 x assembly crossbar.
How supplied
– Single items.
Note
Please also order the appropriate mounting material.
MIR00094
W/d U
w1
w2
X
Type
Model
Order No.
UP
19"
482
442.6
81.5
1
Pos. 2: MIR2 /
DCM / Smaract
05.040.018.X
1 unit
1
–Used with C extrusion rails.
Material / Finish
– Flat rolled steel, 4.0 mm, zinc passivated.
Scope of delivery
– 20 x threaded plates.
How supplied
– In sets.
MEC20051
Cable through between
the racks
–For orderly cable routing between
linked racks, adjacent racks.
–Velcro strips can be used for fastening.
MEC20042
Order No.
UP
05.040.077.9
1 set
MEC20119
82
Material / Finish
– Sheet steel, 1.5 mm.
– Powder-coated texture, RAL 7035 light-grey.
Scope of delivery
– 1 x cable through.
– 1 x Mounting kit.
How supplied
– In sets.
Note
Please also order Velcro rolls.
W
D
Order No.
UP
265
60
05.040.058.1
1 unit
FOC 19" excess cable
drawer, 1 U
Universal cable routing bracket
–For storing excess fiber optic cable.
–Pull-out.
–Cables can be fastened with Velcro.
Material / Finish
– Sheet steel, 1.5 mm.
Color
– Final digit of order number .1: RAL 7035 light-grey.
– Final digit of order number .8: RAL 7021 dark-grey.
MEC20038
–Used for extrusion distance (from front)
123 mm and 73 mm.
– For organized cable management.
– Open version, no threading.
–Mounting on the external side of the 19" extrusion.
– Any installation position selectable.
MEC20047
Scope of delivery
– 1 x unit.
– 1 x drawer.
MEC20099
How supplied
– In sets.
MEC20072
Note
Please also order mounting material for front plates
and Velcro rolls.
Material
– Round steel, d = 6 mm.
Finish
– Zinc-passivated.
Scope of delivery
– 4 x cable routing brackets.
– 1 x Mounting kit.
How supplied
– In sets.
MEC20106
W
H
D
Order No.
UP
483
44
350
05.040.047.X
1 set
WRack
For rack type
from 800 MIR2 / DCM
Order No.
UP
05.040.220.9
4 Stk
Excess fiber optic cable storage
Square cable routing bracket
–For orderly cable routing of Fiber optic cables in
Miracel rack (from B 800 mm).
– For storing excess cable.
MEC20044
Material / Finish
– Base plate: powder-coated texture.
– Cable routing head: polyamide, black.
MEC20039
Color
– Final digit of order number .1: RAL 7035 light-grey.
– Final digit of order number .8: RAL 7021 dark-grey.
MEC20146
Scope of delivery
– 1 x base plate.
– 1 x cable routing head.
– 1 x Mounting kit.
MEC20107
How supplied
– In sets.
U
Order No.
UP
2
05.040.041.X
1 set
Material
– Round steel, d = 6 mm.
Finish
– Zinc-passivated.
Scope of delivery
– 4 x square cable routing brackets.
– 1 x Mounting kit.
How supplied
– In sets.
Type 1
MEC20116
WRack
– For orderly cable management.
– Open version, no threading.
–Mounted on the external side of the 19" extrusion.
– Any installation position selectable.
– For high cable density.
Type 2
Type
from 800 Type 1
For rack type
Order No.
UP
MIR2 / DCM
05.040.221.9
4 units
from 700 Type 2
MIR2 / DCM
05.040.222.9
4 units
600
Smaract
05.040.222.9
4 units
Type 2
83
VERTIV™ KNÜRR® CABLE MANAGEMENT
2
MIR2/DCM Cable routing bracket, flexible
1
Cable routing bracket
–Enables flexible and organized cable routing.
–Can be easily installed in various positions within the
rack.
– Open version, no threading.
3
MEC20035
MEC20065
– For organized cable management.
– Open version, no threading.
MIR00564
Material
– Round steel, d = 5 mm.
Material/Oberfläche
– Round steel, d = 5 mm.
Finish
– Zinc-passivated.
Scope of delivery
– 4 x cable routing brackets.
– 1 x Mounting kit.
How supplied
– In sets.
Finish
– Zinc-passivated.
Scope of delivery
– 10 x cable routing brackets.
– 1 x Mounting kit.
How supplied
– In sets.
MEC00122
Model
For rack type
Order No.
UP
95 x 60
MIR2 / DCM
05.040.225.9
4 units
Section support bracket
–Ideal for vertical routing and reducing cabling strain.
– Open version, no threading.
–Mounted on the external lateral T-slot of the 19"
extrusion.
– Any installation position selectable.
– From rack width 600 mm.
MEC20108
A
a
W
w
Model
Order No.
UP
82
72
43
33
Fig. 1
05.040.231.9
10 units
222
212
30
20
Fig. 3
05.040.232.9
10 units
102
92
82
72
Fig. 2
05.040.233.9
10 units
ELM00028
Material / Finish
– Round steel, d = 5 mm, zinc-passivated.
Scope of delivery
– 2 x section support brackets.
How supplied
– In sets.
Note
Please also order the appropriate mounting material.
Square cable routing bracket
ELM00117
– For organized cable management.
– Open version, no threading.
–Mounted on the external lateral T-slot of the 19"
extrusion.
– Any installation position selectable.
Material
– Round steel, d = 5 mm.
Finish
– Zinc-passivated.
Scope of delivery
– 4 x cable routing brackets.
– 1 x Mounting kit.
How supplied
– In sets.
ELM00029
Model
Order No.
UP
MIR2 / DCM / Smaract / DPR
01.117.033.7
2 units
ELM00106
For rack type
Order No.
UP
DoubleProRack
05.040.226.9
4 units
Dimensions in mm:
84
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
UP = Packaging unit
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
Quick-Strip ties for T-slot
Tool-less mounting
Cable routing bracket, square
MIR00183
– For organized cable management.
– Open version, no threading.
–Mounted on the external lateral T-slot of the 19" extrusion.
– Any installation position selectable.
– From rack width 800 mm.
MEC20185
Finish
– Zinc-passivated, Zn 10c, white.
Scope of delivery
– 4 x vertical cable routing brackets.
– 1 x Mounting kit.
How supplied
– In sets.
–Quick tool-less securing.
– For bundling cables.
–Can be unfastened and reused.
–For organized cable management.
–Can be fitted into T-slots in any position.
Material
– Polyethylene and nylon.
– F.R.T., UL-94 HB.
Color
– Black.
Scope of delivery
– 10 x Quick-Strip Velcro ties.
How supplied
– In sets.
MEC20186
ELM00057
WRack
Model
from 800 86 x 86
For rack type
Order No.
UP
Miracel 2 / DCM
05.040.224.9
4 units
For rack type
Order No.
UP
MIR2 / DCM
00.218.506.0
1 set
Quick-Clamp plastic cable routing bracket for
T-slot mounting without tools
Cable routing ring
–Quick tool-less securing.
– For organized cable management.
–Open version, no threading.
–Secures T-slots in any position.
– For organized cable management.
– Open version, no threading.
–Secured on the T-slots of the vertical extrusions.
– Any installation position selectable.
ELM20008
MEC20187
Material / Finish
– PA 6, GF 15, black, UL 94-HB.
Scope of delivery
– 5 x cable routing rings.
– 1 x Mounting kit.
How supplied
– In sets.
Material
– Nylon.
– F.R.T., UL-94 HB.
Color
– Black.
Scope of delivery
– 10 x plastic cable routing brackets.
How supplied
– In sets.
MEC20188
ELM20007
Model
For rack type
Order No.
UP
54 x 118 mm
MIR2 / DCM / Smaract
01.312.207.9
5 units
For rack type
Order No.
UP
MIR2 / DCM
00.218.505.0
1 set
Dimensions in mm:
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
UP = Packaging unit
85
VERTIV™ KNÜRR® CABLE MANAGEMENT
Cable duct
Velcro rolls (by the meter)
–Ideal for organized and covered
cable management of jumper cables.
ELM00004
–For strain-free fastening and
bundling of Cu and fiber optic cables.
–Velcro rolls can be cut to any required length.
Material
– Hard PVC.
MEC20048
Finish
– Stone-grey RAL 7030.
Scope of delivery
– 1 x cable duct with cover.
– 1 x Mounting kit.
Material / Color
– Black, One-Wrap fastener.
– F.R.T., UL 94-V2.
– Blue: One-Wrap fastener.
Scope of delivery
– 1 meter or 25 meter Velcro rolls.
How supplied
Sold by the meter.
MEC20147
ELM00052
W
L
Model
Order No.
UP
16
1000
Black
05.040.060.9
1 meter
L
Order No.
UP
16
1000
Blue
05.040.061.9
1 meter
2000
01.117.098.3
1 unit
16
25000
Black
05.040.065.9
25 meters
16
25000
Blue
05.040.066.9
25 meters
Cable routing ring
Cable band clip
MEC20158
– For organized cable management.
–Dimensions:
Exterior 61 mm x 42.5 mm.
Interior 52 mm x 23 mm.
Material / Finish
– Cable support: PPO,
similar to RAL 7035 light-grey.
– Soft rubber extrusion: EPDM,
similar to RAL 7021 dark-grey.
Scope of delivery
– 10 x cable routers
How supplied
– In sets.
ELM00049
ELM00050
– For organized cable management.
–For securing harnesses and cables with large cross
sections.
– Quick and easy mounting.
–Clips into T-slots in any position.
– Includes releasable clip.
Material
– PA 6.6, black, UL 94-V0.
Scope of delivery
– 20 units.
How supplied
– In sets.
Note
Please also order the appropriate mounting material.
Model
Order No.
UP
Screw-on
05.040.113.9
10 units
86
Order No.
UP
01.240.548.9
20 units
Cable clamping frame
MEC20048
– For organized cable management.
– Open version, no threading.
–Cross-section for cable routing, variable with
removable routing ribs.
–Can be expanded by adding on further cable
clamping frames.
–Mounting options: lengthwise or across the width.
Material
– Polypropylene, black.
Scope of delivery
– 1 x cable clamping frame.
– 1 x Mounting kit.
How supplied
– In sets.
MEC20147
Order No.
UP
01.113.153.9
1 unit
Cable support bar
TEL00034
–
–
–
–
For 19" racks and enclosures.
Reduces the cable load on slot-in.
Orders cabling.
Prevents cable-slack.
Material
– Sheet steel, 1.5 mm.
Scope of delivery
– 1 x cable support bar.
TEL00051
Order No.
UP
05.043.327.9
1 unit
Dimensions in mm:
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
UP = Packaging unit
87
VERTIV™ KNÜRR® FAN UNITS
Vertiv™ Knürr® Fan Units
Features
CoolBlast®
Modular construction for varying heat
loads; different designs available.
Top-mounting fan and 19-fan unit
available.
Special protection grid keeps pressure
losses to a minimum and reduces noise
levels.
Energy-efficient speed-controlled
design also available.
Silent top-mounting fan
Minimal noise level for use in office
environment.
Provides forced rack cooling.
Filter fan
Protection class IP54.
Filter can be replaced quickly and
easily.
Can be used to draw or push air.
88
The ever-increasing power losses of electronic modules make for high
demands on effective cooling. Large air-flow volumes ensure secured heat dissipation.
The packing density of the electronic equipment in racks and enclosures is also
increasing.
The sharp rise in the price of electricity has resulted in energy efficiency gaining importance
and environmental concerns increasingly become a prominent
decision-making factor. Consequently, the use of speed-controlled fan units is rising. The
additional costs generally prove to be a worthwhile investment.
Vertiv™ Knürr® CoolBlast® Fan Unit for Cover Panel Installation
Unregulated and thermostat-controlled
–Provides powerful rack cooling.
–Suitable for retrofitting in cover panel of MIR2 / DCM
rack.
–DC versions and 115 VAC versions upon request (see
Vertiv Knürr CoolBlast® fan inserts).
–Thermostat-controlled model: Fan function (ON/OFF)
thermostat-controlled; setting range from 0° to + 60° C.
LUF20203
Scope of delivery
– 1 x CoolBlast fan unit.
– 1 x mains cable, 3 m with safety plug (230 VAC).
– 1 x Mounting kit.
– 1 x Operating instructions.
How supplied
– Assembled, wired and tested.
Material
– Enclosure: sheet steel, high-grade steel grid.
Note
Please also order corresponding mains cable.
Finish
– Zinc-passivated.
Compliance
– CE marking compliant with Low Voltage Directive
73/23/EEC; EMC directive 89/366/EEC
LUF20205
LUF20124
LUF20175
·
Electrical connection
P(W)
V (m3/h)
∆P(Pa)
p(dB(A))
Order No.
UP
CoolBlastT 230V 3-piece
207...253 VAC; 50/60 Hz
45
495
74
45.2
03.027.301.1
1 unit
CoolBlastT 230V 6-piece
207...253 VAC; 50/60 Hz
90
990
74
48.8
03.027.302.1
1 unit
Name
Model
CoolBlastT 230V 2-piece
Thermostat
207...253 VAC; 50/60 Hz
30
330
74
43.4
03.027.310.1
1 unit
CoolBlastT 230V 3-piece
Thermostat
207...253 VAC; 50/60 Hz
45
495
74
45.2
03.027.311.1
1 unit
CoolBlastT 230V 6-piece
Thermostat
207...253 VAC; 50/60 Hz
90
990
74
48.8
03.027.312.1
1 unit
89
VERTIV™ KNÜRR® FAN UNITS
Vertiv™ Knürr® CoolBlast® Fan Unit
for Cover Panel Installation speed-controlled
–Provides powerful rack cooling.
–Suitable for retrofitting in top cover of MIR2 / DCM rack.
–DC version upon request (see CoolBlast fan inserts).
– Settable reference temperature (20° to 55° C).
–Speed control, 30 to 100 %, if sensor fails, 100 % rotation.
– Individual fan monitoring.
–Potential-free common alarm output for excess
temperature and fan failure.
–Visual status display for O.K., excess temperature and
fan failure.
– Acoustic warning inclusive reset button.
LUF20160
Scope of delivery
– 1 x CoolBlast fan unit.
– 1 x sensor cable, 2 m (plug-in).
– 1 x signal cable, 2 m (plug-in).
– 1 x mains cable, 3 m with safety plug (230 VAC).
– 1 x Mounting kit.
– 1 x Operating instructions.
How supplied
– Assembled, wired and tested.
Note
Please also order specific mains cable.
Material
– Enclosure: sheet steel, high-grade steel grid.
Finish
– Zinc-passivated front cover plate, powder-coated,
smooth in RAL 7035 light-grey.
Compliance
– CE marking compliant with Low Voltage Directive
73/23/EEC; EMC directive 89/366/EEC.
LUF20161
LUF20124
LUF20175
Name
Model
Electrical connection
P(W)
V· (m3/h)
∆P(Pa)
p(dB(A))
Order No.
UP
CoolBlastT 230V 3-piece
Regulated SP
100...253 VAC; 50/60 Hz
25
553
68
49.6
03.027.321.1
1 unit
CoolBlastT 230V 6-piece
Regulated SP
100...253 VAC; 50/60 Hz
48
1106
68
53.3
03.027.322.1
1 unit
CoolBlastT 230V 3-piece
Regulated HP
100...253 VAC; 50/60 Hz
32
711
173
55.8
03.027.324.1
1 unit
CoolBlastT 230V 6-piece
Regulated HP
100...253 VAC; 50/60 Hz
62
1422
173
59.1
03.027.325.1
1 unit
Dimensions in mm:
Conversion:
W = Width
h = Installation height
H = Height
d = Usable depth
D = Depth
L = Length
SP = Standard Performance
HP = High Performance
UP = Ultra High Performance
U = Standard rack unit
(1 U = 44.45 mm)
V
.
= Air-flow volume loss (%)
∆P
= Pressure increase (Pa)
I nom = Nominal current (A)
W = Power consumption
I max = Residual current (A)
90
1 kg = 2.2046 pounds
= Air-flow volume (m3/h)
∆V
p
1 mm = 0.03937 inch
UP = Packaging unit
.
n = Number of fans
V = Voltage
(400V = 3-phase)
kg = Weight
= Sound pressure (dB(A)
distance from the rack 1 m (600 mm x 600 mm; raised cover)
19" Vertiv™ Knürr® CoolBlast® Fan Unit
Unregulated and thermostat-controlled
–Fan unit for vertical ventilation of modules in 19" racks.
–Chassis rails are recommended for mounting. Chassis
rails are required with 6-piece CoolBlast (use chassis
runner, adjustable depth).
–Thermostat-controlled model:
Fan function (ON/OFF) thermostat-controlled; setting
range from 0° to + 60° C.
LUF20125
How supplied
– Assembled, wired and tested.
Compliance
– CE marking compliant with Low Voltage Directive
73/23/EEC; EMC directive 89/366/EEC.
Scope of delivery
– 1 x CoolBlast fan unit, packed with operating
instructions.
– 1 x connection cable, 2 m; Euro power plugs and
sockets.
Material
– Sheet steel, high-grade steel grid.
Finish / Color
– Enclosure zinc-passivated.
– F ront cover plate, powder-coated, smooth in RAL
7035 light-grey.
Note
Please also order specific mains cable.
LUF20139
Name
W
H
D
kg
n
Electrical connection
P(W)
V· (m3/h)
∆P(Pa)
p(dB(A))
Order No.
CoolBlast 230V 3-piece, thermostat
440
43,6
230
3
3
207 ... 253VAC; 50/60Hz
45
495
74
45.2
03.027.011.1
CoolBlast 230V 6-piece, thermostat
440
43,6
390
6
6
207 ... 253VAC; 50/60Hz
90
990
74
48.8
03.027.012.1
CoolBlast 115V 3-piece, thermostat
440
43,6
230
3
3
103.5 ... 126,5VAC; 50/60Hz
44
576
88
47.3
03.027.014.1
CoolBlast 115V 6-piece, thermostat
440
43,6
390
6
6
103.5 ... 126,5VAC; 50/60Hz
88
1152
88
50.8
03.027.015.1
CoolBlast 24V 3-piece SP
440
43.6
230
2.5
3
12...27 VDC
23
553
68
49.6
03.027.031.1
CoolBlast 24V 6-piece SP
440
43.6
390
5
6
12...27 VDC
46
1106
68
53.3
03.027.032.1
Technical data for Axial Single Fan
Item number
Vertiv Knürr CoolBlast®
Vertiv Knürr CoolBlast
Vertiv Knürr CoolBlast
Vertiv Knürr CoolBlast
Vertiv Knürr CoolBlast
01.914.070.9
01.914.075.9
01.914.050.9
01.914.051.9
01.914.051.9-2
Dim: L x W x H
119 x 119 x 38
119 x 119 x 38
119 x 119 x 38
119 x 119 x 38
119 x 119 x 38
Max. volume flow, free blowing:
184.2 m3/h
237 m33/h
192 m3/h
165 m3/h
120 m3/h
Voltage
24 VDC
24 VDC
115 VAC
230 VAC
230 VAC
50 Hz
50 Hz
50 Hz
Frequency
Power consumption
7.4 W
11 W
14.5 W
15 W
7.5 W
Noise, free blowing
43 dB(A)
59 dB(A)
41 dB(A)
38 dB(A)
32 dB(A)
Bearing system
Ball bearing
Ball bearing
Ball bearing
Ball bearing
Ball bearing
Nominal speed
2950 min-1
4400 min-1
2900 min-1
2600 min-1
2100 min-1
Permitted ambient temp.
-10 °C to + 70 °C
-30 °C to + 55 °C
-40 °C to + 60 °C
-40 °C to + 60 °C
-40 °C to + 70 °C
Service life, L10 at 40°C
75,000 h
70,000 h
43,500 h
43,500 h
43,500 h
Compliance
CE, VDE
CE, VDE
CE, VDE
CE, VDE
CE, VDE
Use in fan unit:
03.027.021.1
03.027.022.1
03.027.051.1
03.027.052.1
03.027.321.1
03.027.322.1
03.027.024.1
03.027.025.1
03.027.054.1
03.027.055.1
03.027.324.1
03.027.325.1
03.027.014.1
03.027.015.1
03.027.011.1
03.027.012.1
03.027.301.1
03.027.302.1
03.027.310.1
03.027.311.1
03.027.312.1
02.111.180.9
05.010.306.1
01.243.428.1
03.028.110.8
02.111.181.9
05.010.307.1
91
VERTIV™ KNÜRR® FAN UNITS
19" Vertiv™ Knürr® CoolBlast® Fan Unit
Speed-controlled
–Fan unit for vertical ventilation of modules in 19" racks.
–Reference temperature can be set (20°C to 55°C).
–Speed control, 30 to 100 %; if sensor fails, 100 % rotation.
– Individual fan monitoring.
–Potential-free alarm output for excess temperature
alarm and fan failure.
–Visual status display for O.K., excess temperature and
fan failure.
–Acoustic alarm can be switched off with switch.
–Chassis rails are recommended for mounting. Chassis
rails are required with 6-piece CoolBlast (use chassis
runner, adjustable depth).
LUF20128
Scope of delivery
– 1 x CoolBlast fan unit, packed with operating
instructions.
– 1 x sensor cable, 2 m (plug-in).
– 1 x signal cable, 2 m (plug-in).
Only with DC devices:
– 1 x connection cable, 2 m with connector plug and free
ends.
Only with AC devices:
– 1 x connection cable, 2 m; Euro power plugs and
sockets.
Material
– Sheet steel, high-grade steel grid.
How supplied
– Assembled, wired and tested.
Finish / Color
– Enclosure zinc-passivated.
– Front cover plate, powder-coated, smooth in RAL
7035 light-grey.
LUF20140
Note
Further project-specific characteristics can be realized
in line with standards.
Compliance
– CE marking compliant with Low Voltage Directive
73/23/EEC; EMC directive 89/366/EEC.
LUF20054
LUF20179
Name
W
H
D
kg
n
Electrical connection
P(W)
V· (m3/h)
∆P(Pa)
p(dB(A))
Order No.
CoolBlast 115/230V, 3-piece, controlled SP
440
43.6
230
3.2
3
100 to 253VAC; 50/60Hz
25
553
68
49.6
03.027.021.1
CoolBlast 115/230V, 6-piece, controlled SP
440
43.6
390
6.2
6
100 to 253VAC; 50/60Hz
48
1106
68
53.3
03.027.022.1
CoolBlast 115/230V, 3-piece, controlled HP
440
43.6
230
3.2
3
100 to 253VAC; 50/60Hz
32
711
173
55.8
03.027.024.1
CoolBlast 115/230V, 6-piece, controlled HP
440
43.6
390
6.2
6
100 to 253VAC; 50/60Hz
62
1422
173
59.1
03.027.025.1
CoolBlast 24/48V, 3-piece, controlled SP
440
43.6
230
3.1
3
20 to 60VDC
25
553
68
49.6
03.027.051.1
CoolBlast 24/48V, 6-piece, controlled SP
440
43.6
390
6.1
6
20 to 60VDC
48
1106
68
53.3
03.027.052.1
CoolBlast 24/48V, 3-piece, controlled HP
440
43.6
230
3.1
3
20 to 60VDC
32
711
173
55.8
03.027.054.1
CoolBlast 24/48V, 6-piece, controlled HP
440
43.6
390
6.1
6
20 to 60VDC
62
1422
173
59.1
03.027.055.1
92
Vertiv™ Knürr® CoolBlast® – Air-flow
Routing via Front Intake, 1 U
19" Filter Unit, 1 U
–Suitable for use with CoolBlast slot-in unit.
– Adjusted to the respective recess depth.
– The "front-intake unit" for the Vertiv™ Knürr® CoolBlast® fan delivers targeted cooling for module
supports arranged on top of each other (heat
sources).
– For Knürr CoolBlast slot-in unit 3- and 6 piece for
front intake.
– Used as cooling baffle.
–Can be supplemented with front plate and filter mat.
LUF00205
Material
– Sheet steel.
LUF20156
LUF20131
Material
– Enclosure: sheet steel.
– Front cover plate: ABS (UL94 V-0).
– Handle: extruded aluminum.
– Filter: Viledon P 15/150.
Filter class
– G2.
Finish / Color
– Enclosure: powder-coated texture,
RAL 9011 dark-grey.
– Front cover plate: RAL 7035, light-grey.
– Handle: powder-coated texture,
RAL 5008 grey-blue.
Finish / Color
– Powder-coated texture, RAL 7035.
– Light-grey.
Scope of delivery
– 1 x air-flow guide.
How supplied
– Single items.
LUF20142
H
D
Model
Order No.
UP
43.6
230
For 3-piece
03.027.094.1
1 unit
43.6
390
For 6-piece
03.027.095.1
1 unit
Scope of delivery
– 1 x filter insert.
– 1 x filter.
How supplied
– Single items.
H
D
kg
Order No.
UP
43.6
282
2.0
03.025.250.1
1 unit
43.6
660
4.0
03.025.253.1
1 unit
Vertiv Knürr CoolBlast Front Plate
–For use with air-flow guide for front intake.
– Can be retrofitted.
Material
– Sheet steel.
Finish / Color
– Powder-coated, RAL 7035.
– Light-grey, smooth.
Scope of delivery
– 1 x front plate.
How supplied
– Single items.
LUF20136
H
Order No.
UP
43.6
03.027.097.1
1 unit
Dimensions in mm:
Conversion:
W = Width
h = Installation height
H = Height
d = Usable depth
D = Depth
L = Length
SP = Standard Performance
HP = High Performance
UP = Ultra High Performance
U = Standard rack unit
(1 U = 44.45 mm)
.
V
.
∆V
= Air-flow volume loss (%)
1 kg = 2.2046 pounds
= Air-flow volume (m3/h)
∆P
= Pressure increase (Pa)
I nom = Nominal current (A)
W = Power consumption
I max = Residual current (A)
p
1 mm = 0.03937 inch
UP = Packaging unit
n = Number of fans
V = Voltage
(400V = 3-phase)
kg = Weight
= Sound pressure (dB(A)
distance from the rack 1 m (600 mm x 600 mm; raised cover)
93
VERTIV™ KNÜRR® FAN UNITS
CoolBlast® Dust/Particle Protection
Solution 1: Filter Mat
LUF20121
–Used with CoolBlast® fan top cover.
–Simple filter cover preventing the ingress of dust when
the fan stops (regulated or thermostat-controlled
version available).
–For all top-cover sizes; filter and adhesive tape can be
cut to the required length.
Material
– Filedon (filter class G2)
Scope of delivery
– 1 x filter.
– 1 x Adhesive tape.
How supplied
– In sets.
Model
Order No.
UP
For 2, 3 and 6-piece fan unit
01.149.101.9
1 set
LUF20168
Vertiv Knürr CoolBlast
Filter for Front Intake
Replacement Filter
–For use with air-flow routing via front intake.
–Can be retrofitted; filter can also be replaced during
operation.
– For 19" filter insert.
LUF20135
Filter class
– G2.
Scope of delivery
– 1 x filter.
How supplied
– Single items.
W
D
Model
Order No.
UP
400
160
For 3-piece
03.027.098.1
1 unit
400
320
For 6-piece
03.027.099.1
1 unit
94
Material
– Filter: Viledon P 15/150.
Filter class
– G2.
Scope of delivery
– 1 x filter.
How supplied
– Single items.
LUF00280
Material
– Viledon K15/150.
D
Order No.
UP
282
03.025.246.9
1 unit
660
03.025.249.9
1 unit
Filter Fan
Material
– Heat-resistant ABS plastic,UL 94 V-0
– For specific use where hot spots occur.
–Also suitable for retrofitting, quick and easy.
–The filter mats provide high-level filtration, are easily
exchanged and can be cleaned.
–These maintenance-free fans feature a long service
life and low noise levels.
–Air-flow routing: blows into the rack (pre-set).
– Can be used to draw in or move air out.
Color
– RAL 7035 light-grey.
Compliance
– CE marking
Protection rating
– IP 54.
LUF20057
LUF800040
LUF80011
LUF80012
LUF20058
LxW
D/l/x
y/z
kg
Max. AF
El. conn.
L
G
N
150 x 150
204 x 204
250 x 250
325 x 325
71/120/5
90/120/5.7
113/172/6
125/208/7
125/131
177/185
223/230
291/302
0.812
1
1.690
3.620
57 m3/h
90 m3/h
240m3/h
520m3/h
230V / 50/60Hz
230V / 50/60Hz
230V / 50/60Hz
230V / 50/60Hz
20 W
20 W
29 W
67 W
43 dB(A)
43 dB(A)
50 dB(A)
63 dB(A)
2650/min
2650/min
2800/min
2770/min
150 x 150
204 x 204
250 x 250
325 x 325
24/5
20.5/5.7
25/6
26/7
125/131
177/185
223/230
291/302
0.140
0.275
0.440
0.780
Service
life/40º
40,000 h
40,000 h
40,000 h
50,000 h
Model
Order No.
UP
Filter fan
Filter fan
Filter fan
Filter fan
03.026.501.1
03.026.502.1
03.026.503.1
03.026.504.1
1 unit
1 unit
1 unit
1 unit
Exit filter
Exit filter
Exit filter
Exit filter
03.026.511.1
03.026.512.1
03.026.513.1
03.026.514.1
1 unit
1 unit
1 unit
1 unit
03.026.521.9
6 unit
03.026.522.9
6 unit
03.026.523.9
6 unit
03.026.524.9
6 unit
Replacement
filter mat
Replacement
filter mat
Replacement
filter mat
Replacement
filter mat
150 x 150
204 x 204
250 x 250
325 x 325
Dimensions in mm:
Conversion:
W = Width
h = Installation height
H = Height
d = Usable depth
D = Depth
L = Length
SP = Standard Performance
HP = High Performance
UP = Ultra High Performance
U = Standard rack unit
(1 U = 44.45 mm)
V
.
1 kg = 2.2046 pounds
= Air-flow volume (m3/h)
∆V
= Air-flow volume loss (%)
∆P
= Pressure increase (Pa)
I nom = Nominal current (A)
W = Power consumption
I max = Residual current (A)
p
1 mm = 0.03937 inch
UP = Packaging unit
.
n = Number of fans
V = Voltage
(400V = 3-phase)
kg = Weight
= Sound pressure (dB(A)
distance from the rack 1 m (600 mm x 600 mm; raised cover)
95
VERTIV™ KNÜRR® FAN UNITS
Bracket for
Temperature Module
Temperature Module
LUF00237a
–For monitoring the inside temperature
of the rack.
– Temperature display (+ 10°C to + 70°C).
–Alarm temperature set via potentiometer at the
front.
– Visual alarm display (LED red).
–Alarm signaling via potential-free switching contact
(1 changeover contact 250 VAC / 8 A).
– Power supply 230 V / 50 Hz.
–For non-standard temperature module
installation, e.g., on the side of the 19" extrusion.
LUF00255
Material
– Plastic.
Material / Finish
– Aluminum, 2 mm, polished.
Scope of delivery
– 1 x bracket.
– 1 x Mounting kit.
How supplied
– In sets.
Compliance
– CE marking compliant with Low Voltage Directive
73/23/EEC; EMC directive 89/336/EEC.
Order No.
UP
01.117.525.1
1 unit
LUF20000
1 U for Temperature Module
–For monitoring the inside temperature
of the rack with respect to slot-in units and heating
fans.
– Setting range: + 10°C to + 60°C.
–Switching temperature difference (hysteresis) 2 K.
– Contact type: 1 changeover contact.
– Sensor: thermo-bimetal.
–Contact rating: 230 VAC/10 A (heating), 5 A
(cooling).
– Interference suppression: compliant with DIN 55014.
Material
– Plastic.
Protection rating
– IP 30.
– For temperature module installation.
Material / Finish
– Sheet steel, 1.5 mm, powder-coated texture.
LUF00256
Color
– RAL 7035 light-grey.
Scope of delivery
– 1 x 19" front plate.
Order No.
UP
01.117.526.1
1 unit
Compliance
– CE marking compliant with Low Voltage Directive
73/23/EEC; EMC directive 89/336/EEC.
Dimensions
– 74 x 74 x 23 mm.
Scope of delivery
– 1 x thermostat.
– 1 x mounting bracket.
– 1 x Mounting kit.
Dimensions in mm:
h = Installation height
H = Height
d = Usable depth
D = Depth
L = Length
SP = Standard Performance
UP = Ultra High Performance
U = Standard rack unit
(1 U = 44.45 mm)
.
UP
01.113.384.3
1 unit
V
.
∆V
= Air-flow volume loss (%)
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
= Air-flow volume (m3/h)
∆P
= Pressure increase (Pa)
I nom = Nominal current (A)
W = Power consumption
I max = Residual current (A)
p
kg = Weight
UP = Packaging unit
n = Number of fans
V = Voltage
(400V = 3-phase)
Order No.
Conversion:
W = Width
HP = High Performance
96
1 unit
Thermostat
19" Front Plate
UP
01.117.527.0
Scope of delivery
– 1 x Temperature module.
– 1 x Temperature sensor (3 m).
How supplied
– Assembled, wired and tested.
Order No.
= Sound pressure (dB(A)
distance from the rack 1 m (600 mm x 600 mm; raised cover)
VERTIV™ KNÜRR® SMARACT®
Vertiv™ Knürr® Smaract®
Compact Rack
Features
A
mple space for components and
cabling provided in an efficient,
compact design.
The innovative frame concept with
triangular extrusions ensures low weight
while maintaining high stability.
The Vertiv™ Knürr® Smaract® Compact Rack is an innovative and practical 19" enclosure
with extremely low space requirements that is highly flexible and efficient. At the same
time, it facilitates integration and modular expansion,
delivering a wide range of impressive detailed solutions.
Vertiv Knürr Smaract is an ideal, compact 19" platform available in various models that meet IP
and EMC requirements.
Modular, stackable construction.
Easy access from all sides for
installation and maintenance – hinged
doors and side panels can be quickly
removed.
Secured access: The side panels can
only be removed once the front or rear
door has been opened.
The patented mounting hole rails in the
19" extrusion ensure that all
components can be positioned quickly
and easily.
Doors and side panels have an 180°
opening angle.
Available as server compact rack:
Perforation of front and rear doors >
80 %.
Available as EMC and IP version (also
IP-EMC combination).
97
VERTIV™ KNÜRR® SMARACT®
Vertiv™ Knürr® Smaract®
Main features
Access
Access from all sides is a time-saving factor,
e. g. for integration of components and for
maintenance. (1)
Intelligent construction
Innovative frame concept delivers low
weight while providing high stability with
new triangular extrusions. (2)
Modular concept: simple expansion with
stackability
Provides adequate space on the side for
cabling; cable entry on rear door. (3)
1. SMA20006
4. SMA20126
Cable management
Well prepared to have and easy and selfexplanatory cabling. (4)
EMC and IP version
The compact rack can be upgraded to IP or EMC standard at all times. (Also in combined IP/EMC version). (5)
Forward-thinking solutions
Flexibility due to integration of 19"
technology. 6 heights to choose from; 9 U to
24 U. (6)
2. SMA20005
5. SMA20046
3. SMA20004
6. SMA20017
98
Vertiv™ Knürr® Smaract® 19" Rack Compliant with IEC 297
Technical data
19" components compliant with IEC 297-3
– Height: 9 U to 24 U
1 U = 44.45 mm.
– Width: 482.6 mm (19").
– Depths: 600, 800, 900 and 1000 mm.
Versions
– IP 20.
– IP 54.
– EMC.
SMA20067
Available space
– 82 % of the basic surface can be used as
space for installation and cable routing.
Configuration
– Fixed, on leveling feet.
– Mobile, on casters with snib.
Tests dependent on design
– Safety compliant with EN 50298 and EN
60950.
– Protective conductor/grounding
compliant with DIN VDE 0701-1.
– Vibration test compliant with MIL-STD
810 E.
– Vibration and shock test compliant with
DIN EN 300019-2-2.
– IP test compliant with DIN EN 60529.
– EMC shielding attenuation com­pliant with
IEEE-STD-299 and VG 95 373 part 15 (30
MHz - 1 GHz).
– Plastic components as per UL94 V-0.
Applications
SMA20166
SMA20109
SMA20181
SMA20009
SMA20122
99
VERTIV™ KNÜRR® SMARACT®
Vertiv™ Knürr® Smaract® 19" Compact Rack
with Glass Door
– For components compliant with IEC 297-3.
–Access from all sides with removable covers.
–Flexible assembly of the components using mounting
holes.
–Cable entry via rear panel (optional via top cover/bottom
cover).
–Heat loss discharge via own convection or with fan unit
on the rear panel (accessory).
– Door opening angle, 180°.
– Front door with safety glass, lockable.
Jumpering space
– Front 110 mm.
SMA20024
Scope of delivery
– 1 x basic rack.
– 2 x side panels, closed; hinged on both sides.
– 1 x top cover, closed.
– 1 x glass front door, lockable.
– 1 x rear door with cable entry, lockable, prepared for
ventilation unit.
– 4 x 19" sheet steel vertical extrusions.
– 1 x grounding set.
– 4 x leveling feet.
How supplied
– Assembled.
Load rating
– 2000 N static.
Protection rating
– IP 20.
Material / Finish
– Basic rack, extruded aluminum, polished.
– Corner connector, die-cast, polished.
– Covers, sheet steel, powder-coated texture.
– Glass infill front door, single safety glass panel.
t
T
Color
– RAL 7035, light-grey.
SMA20026
100
W
H
D
U
d
kg
Model
Order No.
UP
600
478
600
9
365
16
With 19" mount. hole extru.
02.110.057.1
1 unit
600
612
600
12
365
20
With 19" mount. hole extru.
02.110.062.1
1 unit
600
745
600
15
365
24
With 19" mount. hole extru.
02.110.067.1
1 unit
600
879
600
18
365
28
With 19" mount. hole extru.
02.110.072.1
1 unit
600
1012
600
21
365
32
With 19" mount. hole extru.
02.110.077.1
1 unit
600
1145
600
24
365
36
With 19" mount. hole extru.
02.110.082.1
1 unit
600
478
800
9
565
19
With 19" mount. hole extru.
02.110.059.1
1 unit
600
612
800
12
565
23
With 19" mount. hole extru.
02.110.064.1
1 unit
600
745
800
15
565
27
With 19" mount. hole extru.
02.110.069.1
1 unit
600
879
800
18
565
31
With 19" mount. hole extru.
02.110.074.1
1 unit
600
1012
800
21
565
35
With 19" mount. hole extru.
02.110.079.1
1 unit
600
1145
800
24
565
39
With 19" mount. hole extru.
02.110.084.1
1 unit
Vertiv™ Knürr® Smaract® 19" Server Compact Rack
with Perforated Door
– For components compliant with IEC 297-3.
–Access from all sides, removable covers.
–With special 19" server extrusions for mounting tradestandard servers.
–With perforated doors on the front and rear
(hexagonal holes with large flow cross-section) for
optimal airflow.
–Door opening angle, 180°.
Jumpering space
– Front 75 mm.
Flow cross-section
– 1150 cm2 with 9 U.
– 1 950 cm2 with 15 U.
– 2700 cm2 with 21 U.
– 3100 cm2 with 24 U.
Scope of delivery
– 1 x basic rack.
– 2 x side panels, closed, hinged on both sides.
– 1 x top cover, closed.
– 1 x front door with perforation, lockable.
– 1 x rear door with perforation, lockable.
– 4 x 19" server sheet-steel extrusions with mounting
holes.
– 1 x grounding set.
– 4 x leveling feet.
Note
Order mounting adapters for 19" server extrusion for
mounting Knürr accessories. Set with 4 adapters order
number 01.127.119.9.
SMA20067
Material / Finish
– Basic rack, extruded aluminum, polished.
–C
orner connector, die-cast, polished.
– Covers, sheet steel, powder-coated texture.
Color
– Final digit of order number .1: RAL 7035, light-grey.
– F inal digit of order number .8: RAL 7021 dark-grey.
W
H
D
U
d
kg
Model
Order No.
UP
600
478
900
9
740
21
Door without frame
02.110.010.1
1 unit
600
478
900
9
740
21
Door without frame
02.110.010.8
1 unit
600
745
900
15
740
29
Door with frame
02.110.020.1
1 unit
600
745
900
15
740
29
Door with frame
02.110.020.8
1 unit
600
1012
900
21
740
37
Door with frame
02.110.030.1
1 unit
600
1012
900
21
740
37
Door with frame
02.110.030.8
1 unit
600
1145
900
24
740
41
Door with frame
02.110.035.1
1 unit
600
1145
900
24
740
41
Door with frame
02.110.035.8
1 unit
600
1145
1000
24
740
43
Door with frame
02.110.040.1
1 unit
600
1145
1000
24
740
43
Door with frame
02.110.040.8
1 unit
SMA20060
Dimensions in mm:
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
UP = Packaging unit
101
VERTIV™ KNÜRR® SMARACT®
Vertiv™ Knürr® Smaract® 19" Compact Rack
Enclosure without door
– For components in acc. with IEC 297-3.
– Removable covers.
How supplied
– Assembled.
Load rating
– 2000 N static.
Note
If required, please also order 19" extrusions
for rear 19" level.
Material/Finish
– Basic rack, extruded aluminum, polished.
–C
orner connector, die-cast, polished.
– Covers, sheet steel, powder-coated texture.
Color
– RAL 7035 light-grey.
SMA20025
SMA20027
Supply schedule
– 1 x basic rack.
– 2 x side panels, closed, hinged on both sides.
– 1 x top cover, closed.
– 1 x trim frame, front.
– 1 x rear door with cable entry, lockable, prepared for
ventilation unit.
– 2 x 19" aluminum vertical extrusions, front, with
T-slot.
– 1 x earthing set.
– 4 x leveling feet.
W
H
D
U
kg
Order no.
UP
600
478
600
9
16
02.110.107.1
1 unit
600
745
600
15
24
02.110.117.1
1 unit
600
1012
600
21
28
02.110.127.1
1 unit
600
478
800
9
19
02.110.109.1
1 unit
600
745
800
15
25
02.110.119.1
1 unit
600
1012
800
21
31
02.110.129.1
1 unit
SMA20042
Dimensions in mm:
102
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
UP = Packaging unit
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
Vertiv™ Knürr® Smaract® Glass Door
with Swing Handle
– Can be used as front and rear door.
–With swing handle for mounting a profile half-cylinder
lock.
Material
– Covers, sheet steel, powder-coated texture.
– Glass infill, single safety glass panel.
Finish
– Powder-coated texture, RAL 7035 light-grey.
Scope of delivery
– 1 x glass door with swing handle.
– 1 x Mounting kit.
How supplied
– In sets.
SMA20194
W
H
U
Model
Order No.
UP
600
478
9
Glass door
02.111.086.1
1 unit
600
612
12
Glass door
02.111.087.1
1 unit
600
745
15
Glass door
02.111.088.1
1 unit
600
879
18
Glass door
02.111.089.1
1 unit
600
1012
21
Glass door
02.111.090.1
1 unit
600
1143
24
Glass door
02.111.091.1
1 unit
Vertiv Knürr Smaract Door, perforated
with Swing Handle
– Can be used as front and rear door.
–With swing handle for mounting a profile half-cylinder
lock.
–Hexagonal holes with large flow cross-section.
Material
– Covers, sheet steel, powder-coated texture.
SMA20193
Scope of delivery
– 1 x perforated door with swing handle.
– 1 x Mounting kit.
How supplied
– In sets.
Finish
– Final digit of order number .1: powder-coated texture,
RAL 7035, light-grey.
– Final digit of order number .8: powder-coated texture,
RAL 7021 dark-grey.
W
H
U
Model
Order No.
UP
600
478
9
Perforated door
02.111.096.1
1 unit
600
612
12
Perforated door
02.111.097.1
1 unit
600
745
15
Perforated door
02.111.098.1
1 unit
600
879
18
Perforated door
02.111.099.1
1 unit
600
1012
21
Perforated door
02.111.100.1
1 unit
600
1143
24
Perforated door
02.111.101.1
1 unit
103
VERTIV™ KNÜRR® SMARACT®
Vertiv™ Knürr® Smaract®
Ventilation Unit
Vertiv Knürr Smaract
19" Steel Extrusion with Mounting Holes
– Easily added onto a rear panel.
– With two axial fans.
– With thermostat.
–Available in two different performance classes.
SMA20195
– For front and rear installation.
SMA20104
Technical data for single fan
– Type 1:
max. volume flow (free blowing): 162 m3/h.
Noise emission (free blowing): 37 dB(A).
– Type 2 (quiet):
max. volume flow (free blowing): 120 m3/h.
Noise emission (free blowing): 32 dB(A).
Technical data for thermostat
– Setting range: 0 to 60 °C.
– Mains supply: 240 V / 50 Hz.
– Nominal current: 16 A.
SMA20180
Material / Finish
– 19" extrusions: sheet steel, zinc-passivated.
– Mounting bracket: sheet steel, 1.5 mm, zincpassivated.
Scope of delivery
– 2 x 19" extrusions with mounting holes.
– 4 x mounting brackets.
– 1 x Mounting kit.
How supplied
– In sets.
Material / Finish
– Zinc-passivated sheet steel.
Scope of delivery
– 1 x fan unit wired ready for connection, with
thermostat.
– 1 x Mounting kit.
SMA20106
How supplied
– Pre-assembled.
Model
Order No.
UP
Type 1
02.111.180.9
1 unit
Type 2 (quiet)
02.111.181.9
1 unit
U
Order No.
UP
9
02.111.156.9
1 unit
12
02.111.157.9
1 unit
15
02.111.158.9
1 unit
18
02.111.159.9
1 unit
21
02.111.160.9
1 unit
24
02.111.161.9
1 unit
Mounting Adapters
for 19" Server Extrusion
–For mounting standard Vertiv Knürr components
(storage shelves, drawers, chassis rails, keyboard
tray, etc.) in 19" installation space.
Vertiv Knürr Smaract
19" Aluminum Extrusion with T-slot
MIR20044
– For front and rear installation.
SMA20103
Material / Finish
– 19" extrusions: extruded aluminum polished.
– Mounting bracket: Sheet steel, zinc-passivated.
Scope of delivery
– 2 x 19" extrusions with T-slot incl. increment slides.
– 4 x mounting brackets.
– 1 x Mounting kit.
How supplied
– In sets.
Material
– Zinc-passivated sheet steel.
Scope of delivery
– 4 x adapters.
MIR20082
SMA20105
U
Order No.
UP
9
02.111.146.9
1 unit
12
02.111.147.9
1 unit
15
02.111.148.9
1 unit
18
02.111.149.9
1 unit
21
02.111.150.9
1 unit
24
02.111.151.9
1 unit
104
U
Order No.
UP
1
01.127.119.9
1 unit
Vertiv™ Knürr® Smaract®
Depth Brace
Vertiv Knürr Smaract
Top/Bottom Cover with Cable Entry
– For additional strengthening of the enclosure.
–For routing cables with cable ties and as universal
mounting option.
–With holes for mounting cage nuts.
– Variable positioning with T-slot.
– Installation on the frame extrusions.
– With integrated cable clamping.
– With brush strip for cable entry.
SMA20172
Material / Finish
– Sheet steel, powder-coated texture.
Color
– Final digit of order number .1: RAL 7035, light-grey.
– Final digit of order number .8: RAL 7021 dark-grey.
Scope of delivery
– 1 x bottom cover with cable routing.
– 1 x brush strip.
– 1 x Mounting kit.
How supplied
– In sets.
SMA20168
Material / Finish
– Sheet steel, zinc-passivated 1.5 mm.
Scope of delivery
– 1 x depth brace.
– 1 x Mounting kit.
How supplied
– In sets.
Note
Not compatible with 19" server extrusions.
SMA20173
D
Order No.
UP
W
D
Order No.
UP
600
600
02.111.042.1
1 unit
600
800
02.111.044.1
1 unit
600
900
02.111.045.1
1 unit
600
02.111.002.0
1 unit
600
900
02.111.045.8
1 unit
800
02.111.004.0
1 unit
600
1000
02.111.046.1
1 unit
900
02.111.005.0
1 unit
600
1000
02.111.046.8
1 unit
Vertiv Knürr Smaract
Top Cover/Bottom Cover closed
SMA20028
Vertiv Knürr Smaract
Bottom Cover, perforated with Filter Mat
– For cooling with air convection.
Material / Finish
– Sheet steel, powder-coated texture.
Color
– Final digit of order number .1: RAL 7035, light-grey.
– Final digit of order number .8: RAL 7021 dark-grey.
How supplied
– In sets.
Note
Use of the bottom cover in combination with the
stationary plinth is not possible.
W
D
Order No.
600
600
02.111.052.1
1 unit
800
02.111.054.1
1 unit
600
900
02.111.055.1
1 unit
600
900
02.111.055.8
1 unit
600
1000
02.111.056.1
1 unit
600
1000
02.111.056.8
1 unit
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
Color
– RAL 7035, light-grey.
Scope of delivery
– 1 x p erforated bottom cover with filter mat.
– 1 x Mounting kit.
How supplied
– In sets.
W
D
Order No.
UP
600
600
02.111.062.1
1 unit
600
800
02.111.064.1
1 unit
UP
600
Dimensions in mm:
Material / Finish
– Bottom cover: sheet steel, powder-coated texture.
– Filter mat: Filedon
SMA20029
Scope of delivery
– 1 x bottom cover, closed.
– 1 x Mounting kit.
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
UP = Packaging unit
105
VERTIV™ KNÜRR® SMARACT®
Vertiv Knürr Smaract Plinth
Cover Plate with Cable Entry
Vertiv™ Knürr® Smaract®
Replacement Filter Mat for perforated Bottom Cover
–Used with plinth.
– Used with perforated bottom cover.
Material / Finish
– Filedon.
Scope of delivery
– 5 x replacement filter mats.
How supplied
– In sets.
SMA20058
Material / Finish
– Sheet steel, powder-coated texture.
Scope of delivery
– 1 x cover panel with cable entry.
– 1 x brush strip.
– 1 x Mounting kit.
Color
– Final digit of order number .1: RAL 7035, light-grey.
– Final digit of order number .8: RAL 7021 dark-grey.
How supplied
– In sets.
SMA20098
Model
Order No.
UP
for D600
02.111.068.9
5 units
For D800
02.111.069.9
5 units
Vertiv Knürr Smaract
Plinth
–Stationary.
–Cable entry possible from all sides.
–Panels front and rear with vent slots and installation
option for filter mat.
SMA20177
W
H
Order No.
UP
600
100
02.111.206.1
1 unit
600
100
02.111.206.8
1 unit
Vertiv Knürr Smaract
Twin Caster
Material / Finish
– Sheet steel, powder-coated texture.
Color
– Final digit of order number .1: RAL 7035, light-grey.
– Final digit of order number .8: RAL 7021 dark-grey.
Scope of delivery
– 4 x plinth corners.
– 2 x cover plates, closed.
– 2 x cover plates with vent slots.
– 1 x Mounting kit.
How supplied
– In sets.
–Height 50 mm.
Color
– RAL 9011, graphite black.
Load rating
– 400 N per caster.
– 1200 N max. static total load per rack.
Scope of delivery
– 2 x twin casters.
– 2 x fixed casters.
Standards
– Casters compliant with DIN 12530.
– Load compliant with DIN 12527.
How supplied
– In sets.
SMA20034
W
H
D
Order No.
UP
600
100
600
02.111.201.1
1 set
600
100
800
02.111.203.1
1 set
DOP00233
600
100
900
02.111.204.1
1 set
Order No.
UP
600
100
900
02.111.204.8
1 set
02.111.175.9
4 units
Dimensions in mm:
106
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
UP = Packaging unit
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
Vertiv™ Knürr® Smaract®
Stacking Set
Vertiv Knürr Smaract
Wall Mounting Bracket
Material / Finish
– Sheet steel, powder-coated texture.
Color
– RAL 7035, light-grey.
Scope of delivery
– 2 x wall mounting brackets.
– 1 x Drill hole template.
– 1 x Mounting kit.
Load rating
– 500 N.
How supplied
– In sets.
–Fixed connection for stacking compact racks.
Material / Finish
– Steel, cold rolled, zinc-passivated.
SMA20035
Scope of delivery
– 4 x stacking elements.
– 1 x Mounting kit.
How supplied
– In sets.
SMA20094
Order No.
UP
02.111.171.9
4 unit
SMA20085
Vertiv Knürr Smaract
Eyebolt Set
W
Order No.
UP
600
02.111.220.9
1 set
– Mounted/fixed on crane hooks.
–Load rating, 1900 N static per ring screw.
Material / Finish
– Tool steel, forged.
Scope of delivery
– 4 x crane eyebolts.
How supplied
– In sets.
MEC00074
Grounding Bar
–For safe grounding or potential equalization of
equipments and components.
ELM00068
Order No.
UP
01.243.440.9
4 units
Floor Fixing Kit
MIR00319
Material / Finish
– Sheet steel, 3.0 mm.
Finish
– Galvanized.
Scope of delivery
– 4 x fixing brackets
Material
– Electrolyte copper 9 x 9.
Scope of delivery
– 1 x grounding bar.
– 2 x brackets.
– 1 x Mounting kit.
U
Order No.
UP
12
01.110.703.9
1 unit
15
01.240.543.9
1 unit
18
01.240.544.9
1 unit
21
01.240.545.9
1 unit
24
01.240.546.9
1 unit
Contact Clamp
Order No.
UP
01.130.934.7
1 unit
–Enables safe connection of equipment and components to grounding bar.
– For cables up to 25 mm2.
DOP20016
Scope of delivery
– 20 x contact clamps.
Order No.
UP
01.110.715.9
20 units
107
VERTIV™ KNÜRR® SMARACT®
Vertiv™ Knürr® Smaract® 19" Compact Rack EMC with sheet steel door
– For components compliant with IEC 297-3.
– Removable covers.
Load rating
– 2000 N static.
Material
– Basic frame: extruded aluminum.
– Panels: sheet steel.
– EMC spring: high-grade steel.
Finish
– Basic frame: polished.
–P
anels: powder-coated texture.
SMA20065
Scope of delivery
– 1 x basic rack.
– 2 x side panels, EMC, closed, hinged on both sides.
– 1 x top cover, EMC, closed.
– 1 x bottom cover, EMC, closed.
– 1 x front door, EMC, closed, lockable.
– 1 x rear panel, EMC, closed, screwed.
– 2 x 19" front aluminum vertical extrusions with T-slot
incl. increment slide.
– 1 x grounding set.
– 4 x leveling feet.
How supplied
– Assembled.
Color
– RAL 7035, light-grey.
W
H
D
U
kg
Order No.
UP
600
612
600
12
28
02.110.312.1
1 unit
600
879
600
18
36
02.110.322.1
1 unit
600
1146
600
24
44
02.110.332.1
1 unit
600
612
800
12
32
02.110.314.1
1 unit
600
879
800
18
40
02.110.324.1
1 unit
600
1146
800
24
48
02.110.334.1
1 unit
SMA20059
EMC measurements performed by pkm Electronic GmbH, Frontenhausen.
Tests were carried out in compliance with the following standard: VG 95373 Part 15.
Tested rack: width 600, depth 600, height 1150, closed version.
108
Vertiv™ Knürr® Smaract®
Vertiv Knürr Smaract
Connection Plate, EMC, closed
Connection Plate, EMC, for Fan Unit
– EMC shielding.
–Screwed.
– EMC shielding.
–Screwed.
SMA20148
SMA20137
Material
– Panel: sheet steel.
– EMC spring: high-grade steel.
Material
– Panel: sheet steel.
– EMC spring: high-grade steel.
Finish
– Powder-coated texture.
Finish
– Powder-coated texture.
Color
– RAL 7035, light-grey.
Color
– RAL 7035, light-grey.
Scope of delivery
– 1 x connection plate closed.
– 2 x brackets.
– 1 x Mounting kit.
Scope of delivery
– 1 x connection plate for fan unit.
– 2 x brackets.
– 1 x Mounting kit.
How supplied
– In sets.
How supplied
– In sets.
Note
Suitable fan unit: 02.111.180.9.
SMA20150
SMA20135
W
H
U
Order No.
UP
600
131.3
3
02.111.351.1
1 set
Vertiv Knürr Smaract
W
H
U
Order No.
UP
600
264.6
6
02.111.372.1
1 set
Connection Plate, EMC, with Cable Entry
– EMC shielding.
–Screwed.
SMA20145
Material
– Panel: sheet steel.
– EMC spring: high-grade steel.
– EMC seal extrusion: with high-grade steel grid;
rubber.
– EMC shielding.
–Screwed.
Material
– Panel: sheet steel.
– EMC spring: high-grade steel.
Color
– RAL 7035, light-grey.
Finish
– Powder-coated texture.
Scope of delivery
– 1 x connection plate with cable entry.
– 2 x brackets.
– 1 x Mounting kit.
Color
– RAL 7035, light-grey.
Scope of delivery
– 1 x rear plate closed.
– 2 x brackets.
– 1 x Mounting kit.
How supplied
– In sets.
SMA20137
Vertiv Knürr Smaract
Rear Plate, EMC, closed
SMA20152
Finish
– Powder-coated texture.
How supplied
– In sets.
SMA20137
W
H
U
Order No.
UP
600
131.3
3
02.111.361.1
1 set
W
H
U
Order No.
UP
600
422.9
9
02.111.353.1
1 set
600
556.3
12
02.111.354.1
1 set
600
689.6
15
02.111.355.1
1 set
Dimensions in mm:
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
UP = Packaging unit
109
VERTIV™ KNÜRR® SMARACT®
Vertiv™ Knürr® Smaract® 19" Compact Rack IP 54 with glass door
– For components compliant with IEC 297-3.
– Removable covers.
Load rating
– 2000 N static.
Scope of delivery
– 1 x basic frame.
– 2 x side panels, IP 54, closed, hinged on both sides.
– 1 x top cover, IP 54, closed.
– 1 x bottom cover, IP 54, closed.
– 1 x glass front door IP 54, lockable.
– 1 x rear panel, IP 54, closed, screwed.
– 2 x 19" aluminum vertical extrusions, front, with T-slot
incl. increment slide.
– 1 x grounding set.
– 4 x leveling feet.
Protection rating
– IP 54.
Material
– Basic frame: extruded aluminum.
– Panels: sheet steel.
– Foam seal: polyurethane.
SMA20062
SMA20108
110
Color
– RAL 7035, light-grey.
Finish
– Basic frame: polished.
– Panels: powder-coated texture.
How supplied
– Assembled.
W
H
D
U
kg
Order No.
UP
600
612
600
12
28
02.110.212.1
1 unit
600
879
600
18
36
02.110.222.1
1 unit
600
1146
600
24
44
02.110.232.1
1 unit
600
612
800
12
32
02.110.214.1
1 unit
600
879
800
18
40
02.110.224.1
1 unit
600
1146
800
24
48
02.110.234.1
1 unit
Vertiv™ Knürr® Smaract®
Vertiv Knürr Smaract
Connection Plate, IP54, Closed
Connection Plate, IP54, for Fan Unit
– Protection rating, IP 54.
–Screwed.
– Protection rating, IP 54
–Screwed.
SMA20148
Material
– Panel: sheet steel.
– Foam seal: polyurethane.
Finish
– Powder-coated texture.
SMA20138
SMA20143
Material
– Panels: sheet steel.
– Foam seal: polyurethane.
– Exit filter: ABS plastic, UL94 V-0.
Finish
– Powder-coated texture.
Color
– RAL 7035, light-grey.
Scope of delivery
– 1 x connection plate for fan unit.
– 2 x brackets.
– 1 x Mounting kit.
How supplied
– In sets.
Note
Suitable fan unit: 02.111.180.9.
Color
– RAL 7035, light-grey.
Scope of delivery
– 1 x connection plate closed.
– 2 x brackets.
– 1 x Mounting kit.
How supplied
– In sets.
SMA20136
W
H
U
Order No.
UP
600
131.3
3
02.111.301.1
1 set
Vertiv Knürr Smaract
Type 1
W
H
U
Order No.
UP
600
264.6
6
02.111.322.1
1 set
Connection Plate, IP54, with Cable Entry
– Possible sealing: IP 54.
–Screwed.
SMA20139
Type 1
Vertiv Knürr Smaract
Rear Panel, IP54, closed
Material
– Panel: sheet steel.
– Foam seal: polyurethane.
– Seal extrusion:
Type 1: sponge-rubber seal.
Type 2: polymeric reinforced with metal.
– Protection rating, IP 54.
–Screwed.
SMA20141
Material
– Panels: sheet steel.
– Foam seal: polyurethane.
Finish
– Powder-coated texture.
Color
– RAL 7035, light-grey.
Scope of delivery
– 1 x rear panel closed.
– 2 x brackets.
– 1 x Mounting kit.
How supplied
– In sets.
Finish
– Powder-coated texture.
SMA20169
Color
– RAL 7035, light-grey.
Scope of delivery
– 1 x connection plate with cable entry.
– 2 x brackets.
– 1 x Mounting kit.
How supplied
– In sets.
SMA20138
SMA20138
W
H
U
Model
Order No.
UP
W
H
U
Order No.
UP
600
131.3
3
Type 1
02.111.311.1
1 set
600
156.3
3
02.111.308.1
1 set
600
131.3
3
Type 2
02.111.312.1
1 set
600
289.6
6
02.111.302.1
1 set
600
422.9
9
02.111.303.1
1 set
600
556.3
12
02.111.304.1
1 set
600
689.6
15
02.111.305.1
1 set
600
823
18
02.111.306.1
1 set
600
956.3
21
02.111.307.1
1 set
Dimensions in mm:
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
UP = Packaging unit
111
VERTIV™ KNÜRR® DOUBLEPRORACK®
Vertiv™ Knürr® DoubleProRack®
Stand-Alone Enclosure
Features
Comprehensive 19" enclosure range
from the 6 U enclosure to the 24 U
compact rack.
Innovative design.
Optional with glass door or without
front door.
Integrated carrying handle permits
easy handling.
Version without front door is used for
applications, where direct contact to
controls is needed.
112
Das DoubleProRack® is the choice of rack if an innovative design is requested for
electronic and networking applications.
The DoubleProRack is commonly used for electronic and networking applications.
Vertiv™ Knürr® DoubleProRack® 19" Enclosure Compliant with IEC 297-3
Technical data
Die-cast aluminum frame
construction connected with depth and vertical extrusions made of aluminum.
External dimensions
– Width: 554.4 mm.
– Depths: 500, 600, 700 or 800 mm.
– Heights: 6 U to 24 U.
Installation space compliant with
IEC 297-3.
– Height 6 – 24 U (1 U = 44.45 mm).
– Width 19".
Tests
– Vibration test compliant with
MIL-STD 810 D.
– NEMA 12 test.
Applications
DOP20019
DOP00225
DOP20037
DOP20028
113
VERTIV™ KNÜRR® DOUBLEPRORACK®
Vertiv™ Knürr® DoubleProRack® 19" Stand-alone Enclosure
Description
– For components compliant with IEC 297-3.
– S ide covers and rear panel may be removed.
– Flexible assembly of components using T-slot (also
available with mounting holes).
– Cable entry via rear panel.
– Heat loss discharge via convection on the rear panel
(optional with fan unit).
Color
– Panels RAL 7035 light-grey.
– F rame and extrusions, RAL 5008, grey-blue.
Jumpering space
– Front 125 mm.
Scope of delivery
– 1 x frame rack incl. side covers.
– 1 x full glass door.
– 1 x rear panel with cable entry, 3 parts.
– 1 x panel, above, with vent slots.
– 1 x panel, below, with vent slots.
– 1 x 19" component set (4 vertical extrusions with
T-slot).
– 1 x grounding set with M8 grounding bolt.
Load rating
– 1500 N static.
DOP00256
Material / Finish
– Covers, sheet steel, powder-coated texture.
– Die-cast aluminum frame.
– Extruded aluminum extrusions.
– Front door glass infill, single safety glass panel.
Protection rating
– IP 20.
How supplied
– Assembled.
W
H
D
U
h
d (max.)
Model
Order No.
UP
554.4
577
600
12
532
435
With full glass door
01.246.643.1
1 unit
554.4
711
600
15
666
435
With full glass door
01.246.644.1
1 unit
554.4
844
600
18
799
435
With full glass door
01.246.645.1
1 unit
554.4
978
600
21
932
435
With full glass door
01.246.646.1
1 unit
554.4
1111
600
24
1066
435
With full glass door
01.246.647.1
1 unit
554.4
577
800
12
532
635
With full glass door
01.246.843.1
1 unit
554.4
711
800
15
666
635
With full glass door
01.246.844.1
1 unit
554.4
844
800
18
799
635
With full glass door
01.246.845.1
1 unit
554.4
978
800
21
932
635
With full glass door
01.246.846.1
1 unit
554.4
1111
800
24
1066
635
With full glass door
01.246.847.1
1 unit
DOP00230
Dimensions in mm:
114
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
UP = Packaging unit
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
Vertiv™ Knürr® DoubleProRack® 19" Enclosure without Front Door
Description
– For components compliant with IEC 297-3.
– S ide covers and rear panel may be removed.
– Heat loss discharge via convection on the rear panel
(optional with fan unit).
DOP00253
Load rating
– 1500 N static.
Scope of delivery
– 1 x frame rack incl. side covers.
– 1 x panel, above, with vent slots.
– 1 x panel, below, with vent slots.
– 1 x rear panel (from 12 U enclosure height incl. 3 U
vented cover plate).
– 2 x 19" extrusions, front, with mounting holes.
– 2 x 19" extrusions at the rear, T-slot.
Protection rating
– IP 20.
How supplied
– Assembled.
Material / Finish
– Covers, sheet steel, powder-coated texture.
–D
ie-cast aluminum frame.
– Extruded aluminum extrusions.
Color
– Panels RAL 7035 light-grey.
– F rame and extrusions, RAL 5008, grey-blue.
W
H
D
U
h
d (max.)
kg
Model
Order No.
UP
554.4
311
500
6
265
460
12.5
Without door
01.243.506.1
1 unit
554.4
444
500
9
399
460
15.0
Without door
01.243.509.1
1 unit
554.4
577
500
12
532
460
17.0
Without door
01.243.512.1
1 unit
554.4
711
500
15
666
460
19.5
Without door
01.243.515.1
1 unit
554,4
311
600
6
265
560
14,0
Without door
01.243.606.1
1 unit
554.4
444
600
9
399
560
16.5
Without door
01.243.609.1
1 unit
554.4
577
600
12
532
560
19.0
Without door
01.243.612.1
1 unit
554.4
711
600
15
666
560
22.0
Without door
01.243.615.1
1 unit
554.4
844
600
18
799
560
24.5
Without door
01.243.618.1
1 unit
554.4
978
600
21
932
560
27.0
Without door
01.243.621.1
1 unit
554.4
1111
600
24
1066
560
29.5
Without door
01.243.624.1
1 unit
554.4
577
700
12
532
660
21.5
Without door
01.243.712.1
1 unit
554.4
711
700
15
666
660
24.0
Without door
01.243.715.1
1 unit
554.4
844
700
18
799
660
27.0
Without door
01.243.718.1
1 unit
554.4
978
700
21
932
660
29.5
Without door
01.243.721.1
1 unit
554.4
1111
700
24
1066
660
32.5
Without door
01.243.724.1
1 unit
DOP00052
Dimensions in mm:
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
UP = Packaging unit
115
VERTIV™ KNÜRR® DOUBLEPRORACK®
Vertiv™ Knürr® DoubleProRack®
Vertiv Knürr DoubleProRack
Fan Rear Panel 3 U
19" Installation, Front with T-slot
– With axial fans.
– With thermostat.
–Can also be used as second
mounting level.
DOP20004
Material
– Aluminum extrusions.
DOP20035
Technical data for single fan
– Max. volume flow (free blowing): 162 m3/h.
– Noise emission (free blowing): 37 dB(A).
Technical data for thermostat
– Setting range: 0 to 60°C.
– Mains supply: 240 V / 50 Hz.
– Nominal current: 16 A.
Scope of delivery
– 1 x fan rear panel, wired.
–1xM
ounting kit.
Finish / Color
– Powder-coated texture, RAL 7035 light-grey.
How supplied
– Assembled.
Finish
– Polished.
Scope of delivery
– 2 x 19" extrusions at the front, T-slot.
– 1 x Mounting kit.
How supplied
– In sets.
DOP20036
DOP00313
U
Order No.
Note
Cannot be used in the enclosure's lowest U.
UP
6
01.240.440.9
1 set
9
01.240.443.9
1 set
12
01.240.445.9
1 set
15
01.240.446.9
1 set
18
01.240.447.9
1 set
W
H
U
Model
Order No.
UP
21
01.240.448.9
1 set
554.4
132.5
3
With thermostat
01.243.428.1
1 unit
24
01.240.449.9
1 set
Vertiv Knürr DoubleProRack
Rear Panel, closed
Vertiv Knürr DoubleProRack
19" Installation, Front with Mounting Holes
– For DoubleProRack width 554.4 mm.
–Can also be used as second
mounting level.
DOP20005
Material / Finish
– Sheet steel, 0.8 mm, powder-coated texture.
Color
– RAL 7035, light-grey.
Scope of delivery
– 1 x rear panel, closed.
– 1 x Mounting kit.
How supplied
– In sets.
Material
– Extruded aluminum extrusions.
Finish
– Polished.
Scope of delivery
– 2 x 19" extrusions at the front, mounting holes.
DOP00275
How supplied
– In sets.
DOP00055
W
U
Order No.
UP
554.4
6
01.240.454.1
1 unit
554.4
9
01.240.457.1
1 unit
554.4
12
01.240.459.1
1 unit
U
Order No.
UP
554.4
15
01.240.460.1
1 unit
6
01.240.490.9
1 set
554.4
18
01.240.461.1
1 unit
554.4
21
01.240.462.1
1 unit
9
01.240.493.9
1 set
12
01.240.495.9
1 set
15
01.240.496.9
1 set
18
01.240.497.9
1 set
21
01.240.498.9
1 set
24
01.240.499.9
1 set
116
Vertiv™ Knürr® DoubleProRack®
Vertiv Knürr DoubleProRack
Connection Panel with Brush Strip
Grounding Set for Doors and Trims
– To cover rear panel along with the corresponding rear panel shortened by 3 U.
– For DoubleProRack width 554.4 mm.
–With brush strip for cable routing and strain relief.
DOP00274
Finish / Color
– Powder-coated texture, RAL 7035 light-grey.
Scope of delivery
– 1 x connection plate.
– 1 x Mounting kit.
–For grounding doors and/or cover plates.
Scope of delivery
– 5 x g rounding connections, length 250 mm.
– 1 x grounding connection, 250 mm, two-sided AMP
plug.
– 5 x spring nuts, M5.
– 5 x cylinder screws, M5 x 10 with tooth-lock washer.
– 5 x washers.
MEC20123
How supplied
– In sets.
How supplied
– In sets.
DOP00288
DOP00286
W
H
U
Order No.
UP
554.4
132.5
3
01.243.438.1
1 unit
Vertiv Knürr DoubleProRack
Grounding Set for Enclosures
MEC20122
Scope of delivery
– 2 x grounding connections, length 250 mm.
– 4 x spring nuts, M5.
– 2 x washers.
– 4 x cylinder screws, M5 x 10.
– 1 x grounding bolt.
How supplied
– In sets.
UP
01.245.400.9
1 set
Grounding Bar
– For grounding top/bottom cover.
– With central grounding bolt.
Order No.
–For safe grounding or potential equalization of
equipment and components.
ELM00068
Material
– Electrolyte copper 9 x 9.
Scope of delivery
– 1 x grounding bar.
– 2 x brackets.
– 1 x Mounting kit.
U
Order No.
UP
12
01.110.703.9
1 unit
21
01.240.545.9
1 unit
DOP20025
Order No.
UP
01.243.400.9
1 set
Contact Clamp
–Enables safe connection of equipment
and components to grounding bar.
– For cables up to 25 mm.
DOP20016
Scope of delivery
– 120 x contact clamps.
Dimensions in mm:
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
Order No.
UP
01.110.715.9
20 units
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
UP = Packaging unit
117
VERTIV™ KNÜRR® DOUBLEPRORACK®
Vertiv™ Knürr® DoubleProRack®
Mounting Bracket
– For mounting socket strips and
cable duct.
DOP00282
Material / Finish
– Zinc-passivated sheet steel.
Scope of delivery
– 2 x mounting brackets.
– 1 x Mounting kit.
How supplied
– In sets.
Order No.
UP
01.240.533.9
1 set
Vertiv Knürr DoubleProRack
Twin Caster 50 mm
–For mobile installation of the DoubleProRack standalone enclosure with fixed casters.
DOP00267
Material / Finish
– Polyamide, RAL 9011 black.
Load rating
– 400 N per caster.
– 1200 N max. static total load per rack.
Scope of delivery
– 2 x twin casters.
– 2 x fixed casters.
– 4 x lock washers.
How supplied
– In sets.
DOP00233
H
Order No.
UP
50
01.240.527.9
1 set
75
01.240.528.9
1 set
Dimensions in mm:
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
118
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
UP = Packaging unit
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
VERTIV™ KNÜRR® CONACT®
Vertiv™ Knürr® ConAct®
Network wall-mounted housing
Features
Economical: savings of up to 50% on
transport volume and storage space.
Practical: "one-person" installation as
housing is delivered in parts.
Convenient for laying cables as it can
be accessed from all sides; generous
lateral clearance space.
The Vertiv™ Knürr® ConAct® network wall-mounted housing is notable due to its simple
and quick "one-person" installation.
The Vertiv Knürr ConAct wall-mounted housing offers ideal conditions for network
distribution. It is delivered in flat-pack sets.
Installing the ConAct network housing involves: Unpacking – and then
network installation can begin within minutes.
Individual configuration: various
modification options available (color,
design etc.).
119
VERTIV™ KNÜRR® CONACT®
A. ACT00024
B. ACT00031
1.
120
C. ACT00030
D. ACT00033
E. ACT00034
F. ACT00033
ACT00024
Unpack
Economical
– Einsparung bis zu 50 % des
Transportvolumens durch Flat-PackVerpackung (siehe Bild A).
– Durch platzsparende Verpackung
einfacher Transport bis zur Montage.
– Kleine Verpackung – geringe
Lagerfläche.
"One-person" installation
– No unnecessary dismantling of housing
as it is delivered in parts.
– Rear panel mounted using drill-hole
template.
– Easy assembly:
–Keyhole punching on the rear panel (see
figure B).
– Push-in technology for mounting rails
and covers.
– Symmetrical housing configuration.
Accessories
– Easy integration of accessories; e.g. socket
strips with screw-on points on the vertical
extrusion or on the rear panel (see figure
E).
– Accessories available for orderly cable
management; e.g. cable routing board or
cable-routing bracket (see figure F).
– Comprehensive standard range
of accessories available; e.g. shelves, drawers,
socket strips, etc.
Maintenance-friendly
– Easy access for servicing is guaranteed
when removing the side panels.
– Housing can be locked with security lock.
– Door opening angle: 180°.
Cabling made easy
– Access from all sides guarantees
convenient mounting of the components.
– Open construction design permits easy
cable management.
– Organized cable management with
spacious lateral clearance area and cable
clamping rails (see figures C+D).
ACT00017
2.
ACT00004
Mount rear panel
3.
ACT00005
Mount supports and vertical extrusions
Ventilation unit
Rear panel
Top cover for
ventilation unit
Grey surfaces = system components
(optional, not included in standard delivery)
Cable clamping rail
Rails
Glass door
Side panel
Vertical 19" Extrusion
ACT00038
Bottom cover
Vertiv™ Knürr® ConAct®
Technical data
19" installation dimensions as per IEC 297-3
– Heights: 6 U / 9 HE / 12 U / 15 U / 18 U / 21 U / 24 U
(1 U = 44.45 mm).
– Widths: 482.6 mm (19").
4.
ACT00006
Install cables and components
External dimensions
– Heights: 352 mm / 486 mm / 619 mm / 752 mm / 886
mm / 1019 mm / 1152 mm.
– Width: 600 mm.
– Depths: 400 mm / 500 mm / 600 mm.
5.
ACT00007
Fit covers into place
Standards
– Grounding VDE 0100 T 540, EN 60950, EN 60529.
Configurations
– Stationary, wall mounting.
6.
ACT00008
Installation is now complete.
121
VERTIV™ KNÜRR® CONACT®
Vertiv™ Knürr® ConAct® 19" Wall-mounted Housing
Description
– For components compliant with IEC 297-3.
–A
ccessible from all sides; covers can be removed
quickly.
– Cable routing via brush strip on top and bottom
covers.
– Ventilation unit, optional (can easily be retrofitted).
– Front door with safety glass, lockable.
Scope of delivery
– 1 x rear panel.
– 4 x mounting rails.
– 2 x 19" sheet-steel vertical extrusions.
– 1 x top cover, prepared for ventilation unit.
– 1 x bottom cover, closed.
– 2 x side panels.
– 1 x glass door.
– 1 x cable clamping rail.
– 1 x Mounting kit.
Jumpering space
– 80 mm (minimum 32, > 80 in 25 mm increments).
Load rating
– 500 N static.
How supplied
– In parts.
ACT20053
Protection rating
– IP 20.
Material / Finish
– Rear panel and basic frame, sheet steel, zincpassivated.
– Removable covers, powder-coated sheet steel.
– Front door, single safety glass panel, textured.
– 19" vertical extrusions, zinc-passivated sheet steel.
Color
– RAL 7035, light-grey.
ACT20041
W
H
D
U
h
d (max.)
kg
Model
Order No.
UP
600
352
400
6
270
235
16
With glass door
05.010.000.1
1 unit
600
486
400
9
404
235
19
With glass door
05.010.001.1
1 unit
600
619
400
12
537
235
22
With glass door
05.010.002.1
1 unit
600
352
500
6
270
335
18
With glass door
05.010.007.1
1 unit
600
486
500
9
404
335
21
With glass door
05.010.008.1
1 unit
600
619
500
12
537
335
24
With glass door
05.010.009.1
1 unit
600
752
500
15
670
335
28
With glass door
05.010.010.1
1 unit
600
886
500
18
804
335
31
With glass door
05.010.011.1
1 unit
600
352
600
6
270
435
20
With glass door
05.010.014.1
1 unit
600
486
600
9
404
435
23
With glass door
05.010.015.1
1 unit
600
619
600
12
537
435
27
With glass door
05.010.016.1
1 unit
600
752
600
15
670
435
30
With glass door
05.010.017.1
1 unit
600
886
600
18
804
435
34
With glass door
05.010.018.1
1 unit
600
1019
600
21
937
435
37
With glass door
05.010.019.1
1 unit
600
1152
600
24
1070
435
41
With glass door
05.010.020.1
1 unit
Dimensions in mm:
122
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
UP = Packaging unit
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
Vertiv™ Knürr® ConAct®
19" Vertical Extrusion
Vertiv Knürr ConAct
Grounding Set
–Install in front and/or rear of housing.
ACT00029
Material / Finish
– Sheet steel, 1.5 mm, zinc passivated.
Scope of delivery
– 2 x vertical extrusions.
– 1 x Mounting kit.
Scope of delivery
– 5 x grounding conductors, 6 mm2.
– 1 x Mounting kit.
ACT00026
–For grounding all covers
on housing frame.
Bestell-Nr.
VE
05.010.330.9
1 Satz
Vertiv Knürr ConAct
Cable Clamping Rail
ACT00035
U
Order No.
6
05.010.321.9
1 set
9
05.010.322.9
1 set
12
05.010.323.9
1 set
15
05.010.324.9
1 set
18
05.010.325.9
1 set
21
05.010.326.9
1 set
24
05.010.327.9
1 set
Vertiv Knürr ConAct
ACT20056
–Easy retrofitting of ventilation unit in top
cover.
– With two axial fans.
– With thermostat.
–Available in two performance classes.
Material / Finish
– Zinc-passivated sheet steel.
Technical data for single fan
Type 1:
– Volume flow (free blowing): 162 m3/h per fan.
– Noise emission (free blowing): 37 dB(A).
Type 2 (quiet):
– Volume flow (free blowing): 120 m3/h per fan.
– Noise emission (free blowing): 32 dB(A).
Technical data for thermostat
– Setting range: 0 to 60°C.
– Mains supply: 240 V / 50 Hz.
– Nominal current: 16 A.
Color
– RAL 7035, light-grey.
Scope of delivery
– 1 x ventilation unit ready for connection.
– 1 x Wired with thermostat.
How supplied
– Assembled, wired and tested.
ACT20059
MIR00641
Material / Finish
– Zinc-passivated sheet steel.
Scope of delivery
– 1 x cable clamping rail.
– 1 x Mounting kit.
How supplied
– In sets.
ACT00006_A
Ventilation Unit with Thermostat
ACT20058
–Cables secured with U-clamps, clamping
bars or hammer-head threaded plate.
– For mounting on rear panel.
UP
Model
Order No.
UP
Type 1
05.010.306.1
1 set
Type 2 (quiet)
05.010.307.1
1 set
Order No.
UP
05.010.340.9
1 set
123
VERTIV™ SMARTAISLE™
Vertiv™ SmartAisle™
The Comprehensive Solution for Data Centers
Features
Outstanding fail-safe design.
Ideal temperature for IT quipment; no hot spots.
Minimal energy consumption.
Easy to plan a new data center.
Comprehensive Solution
Racks.
Rack PDUs.
Power distribution.
UPS.
Vertiv™ ICOM™-controlled cooling.
Containment.
Cable management.
Rack and aisle monitoring.
Data center infrastructure.
DCIM Management.
Commissioning and maintenance.
Other services.
The most important trend in IT is the increasing independence of applications from the
IT infrastructure. Virtualization and cloud computing are the current buzzwords.
Hardware is based on energy-efficient IT components and the dynamic control of these
components to meet the applications' current requirements.
Vertiv's SmartAisle™ is the SmartAisle solution encompasses the space, power supply and
cooling for servers, storage and the network in the data center. Data centers are highly
individual and are constantly subject to change. The physical infrastructure can be adapted to
meet any conceivable need by selecting comprehensive portfolio components that harmonize
with one another.
The Vertiv SmartAisle™ solution is future-proof and delivers outstanding availability and
efficiency.
COLD AISLE
CONTAINMENT
COOLING
Liebert® HPM,
HPC, CRV
All have interfaces at a top-level
infrastructure management system
(Vertiv Trellis™), which facilitates holistic
monitoring, management and
automation of the physical
infrastructure.
RACK PLATFORM
Vertiv Knürr DCM Schwerlastschrank,
Vertiv Knürr MIR
MONITORING
DCIM, Vertiv ICOM,
Avocent DS View3
124
POWER SUPPLY
Liebert APM,
Rack PDUs,
Vertiv Knürr PowerTrans®
Vertiv™ SmartAisle™ containment – consistent separation of warm and cold air is the cornerstone of an energy-efficient data center.
125
VERTIV™ SMARTAISLE™
Vertiv™ SmartAisle™
The Comprehensive Solution Concept for Data Centers
Vertiv Control System
Many have already implemented basic
separation of cold air from warm air with
blanking panels, bushings for cable entry,
cold aisle containment, etc. Air-cooling units
are key to energy-efficient data centers and
further optimization is achieved by adjusting
the fans' speed.
Due to rising power costs and increased
environmental awareness, the main objective
for most operators is to maximize the energy
efficiency of their data centers.
The operator reduces electricity costs
significantly by choosing the right type of
control system, which in turn increases
availability. In the event of one recirculated air
cooling device malfunctioning, temperature
control is maintained by increasing the speed
of the remaining devices.
The Vertiv SmartAisle Control-System Principle
126
The two most common control principles are
pressure control and control via the cold
aisle temperature.
With the Vertiv SmartAisle control principle,
the cold aisle temperature, i.e. the
temperature of the air supply to the servers
is used to control the fans in the room's
climate control equipment (see diagram).
This control principle is patented.
127
VERTIV™ SMARTAISLE™
Vertiv™ SmartAisle™
The Comprehensive Solution Concept for Data Centers
SWITCH TUBES
FREE-STANDING
CUSTOMIZED
STANDARD
Overview of Vertiv™ SmartAisle™ Containment
128
Standard program:
Aisle width 1200 / 1500 and 1800 mm.
Rack height 2000 and 2200 mm.
Features:
Ideal for new data centers and for retrofitting homogeneous rack aisles.
Industrial prefabrication makes for a highly economic solution.
Quick and easy on-site installation.
Features:
Precision fit to racks and rows.
Suitable for retrofitting heterogeneous data centers.
Compatible with standard Vertiv SmartAisle.
Features:
Flexible adjustment to racks with non-standard dimensions.
For racks and applications that are exchanged at intervals.
Compatible with standard Vertiv SmartAisle.
Features:
No hot spots.
Suitable airflow routing.
Utilized in energy-efficient data centers.
Standard Vertiv™ SmartAisle™ Containment
Vertiv™ Power Containment Solution
Standard program
Aisle width: 1200 / 1500 and 1800 mm.
Rack height: 2000 and 2200 mm.
Features
Ideal for new data centers and for retrofitting homogeneous rack aisles.
Industrial prefabrication makes for a
highly economic solution.
The standard Vertiv SmartAisle product range consists of flexible, adaptable and userfriendly components.
The individual components equalize the tolerances of the racks, which are not usually installed
with millimeter precision. The system is compatible with most commercially available racks.
The standard top covers have been prepared for the patented Vertiv SmartAisle control
system.
Different door systems are available, including hinged and sliding doors. Hinged or swing doors
offer advantages in terms of safety and emergency exits, while sliding doors take up less space.
Quick and easy on-site installation.
The containment can be used for Vertiv
racks as well as for the most common
racks in the market.
The racks do not need to be installed in
pairs.
The top panels are transparent so that
the available room lighting can be used.
129
VERTIV™ SMARTAISLE™
Vertiv™ SmartAisle™ Containment
Configuration assistant
Top cover plate
Protective brackets
End separator strip
Separator strip for aisle fire extinguishers
SensorBOX
(in air-control opening)
Double door,
sliding door or
front panel element
Rack
CAC20000
Required data per cold aisle
– Aisle width (standard dimensions 1200, 1500 and 1800 mm ± 50 mm)
– Rack height (standard dimensions 2000 and 2200 mm)
– Aisle length
– Rack type
– Color (light-grey RAL 7035 or dark-grey RAL 7021)
Example
Aisle width (AW) = 1200 mm
Rack height (H) = 2000 mm
Aisle length (L) = 4800 mm
Vertiv Knürr DCM® B800
Dark-grey RAL 7021
Options
– Front door component (sliding door, double door, front panel)
– Front door c closer (mechanical, electric)
– Rear door component (sliding door, double door, front panel)
– Rear door closer (mechanical, electric)
Example
Sliding door
Electric door closer
Double door
Mechanical door closer
Item
03.029.026.8
03.029.046.8
03.029.021.8
(integrated in double door)
1 unit
1 unit
1 unit
– Top cover plate
– End separator strip
– SensorBOX
– Protective brackets
– DCM® adjustment shim
– Filler panel
– Height trims
– Sealing set
– Raised-floor air barrier for cable entry
– Open mesh flooring plate
Top cover plate L2400
End separator strip GB 1200
Yes
Yes
Yes
No
No
Yes
Yes (per rack)
Yes
03.029.129.8
03.029.010.8
03.029.132.8
03.029.041.8
03.029.137.8
2 sets
1 pair
2 units
6 sets
3 sets
03.029.040.9
03.029.211.9
03.029.090.8
2 sets
22 units
28 units
130
Vertiv™ SmartAisle™ Sliding-door
Prepared for Automatic Door Closers
Description
– Used in cold aisle containment for aisle widths: 1200
/ 1500 / 1800 mm (± 50 mm).
– Quick and easy mounting.
– Suitable for MIR® and DCM® racks and most other
brands.
Clear door opening
– Width: at least 950 mm.
– Height: 2080 mm.
Material
– Door components: sheet steel.
–O
bservation window: single safety-glass panel.
– Brush strips: polyamide (UL94 HF-1).
CAC20001
– Final digit of order number .8: powder-coated, RAL
7021 dark-grey (e. g. X=8; 03.029.026.
X=03.29026.8=dark-grey).
Scope of delivery
– 1 x frame.
– 2 x doors.
– 2 x floor guides.
– 1 x Covers.
– 1 x Sealing material.
– 1 x Mounting kit.
How supplied
– In sets.
Note
Please order the requisite closers (electric or
mechanical).
Finish
– Final digit of order number .1: powder-coated, RAL
7035 light-grey (e. g. X=1; 03.029.026.
X=03.29026.1=light-grey).
H
AW
Order No.
UP
2000
1200
03.029.026.X
1 set
2200
1200
03.029.027.X
1 set
2000
1500
03.029.061.X
1 set
2200
1500
03.029.062.X
1 set
2000
1800
03.029.066.X
1 set
2200
1800
03.029.067.X
1 set
Electric Sliding-door Closer
Description
CAC20004
– Compatible with SmartAisle™ sliding door.
– Increases energy efficiency as doors closes automatically.
– Opens with "push & go".
– Closes with "push & go" or automatically (0 to 30 seconds).
– Opener/closer contact for control (e.g. fire alarm system).
Material
Technical data
– Power supply: 230 V / 50 - 60 Hz.
– Opening speed: 0.4 m/s.
– Closing speed: 0.2 m/s.
– Automatic closing time, adjustable: 0 to 30 s.
– Force: 30 N.
How supplied
– Sheet steel.
– Single items.
Finish
CAC20005
– Final digit of order number .1:
powder-coated, RAL 7035 light-grey.
– Final digit of order number .8:
powder-coated, RAL 7021 dark-grey.
Scope of delivery
– 1 x electric drive.
– 1 x cover.
– 1 x Mounting brackets.
– 1 x Mounting kit.
Dimensions in mm:
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
Order No.
UP
03.029.046.X
1 set
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
UP = Packaging unit
131
VERTIV™ SMARTAISLE™
Mechanical Sliding-door Closer
CAC20006
Description
– Suitable for Vertiv™ SmartAisle™ sliding door.
– Increases energy efficiency as doors open and close
automatically.
– Stop function when open.
Material
– Sheet steel.
CAC20007
Finish
– Final digit of order number .1: powder-coated, RAL
7035 light-grey (e. g. X=1; 03.029.026.
X=03.29026.1=light-grey).
– Final digit of order number .8: powder-coated, RAL
7021 dark-grey (e. g. X=8; 03.029.026.
X=03.29026.8=dark-grey).
Scope of delivery
– 2 x sets of gas pressure springs.
– 1 x cover.
– 1 x Mounting brackets.
– 1 x Mounting kit.
Technical data
– Force: 20 N.
How supplied
– Single items.
Order No.
UP
03.029.047.X
1 set
Vertiv™ SmartAisle™ Sliding-door
with Access Check
CAC20002
Description
– Used in cold aisle containment for aisle widths: 1200 /
1500 / 1800 mm (± 50 mm).
– Quick and easy mounting.
– Suitable for MIR® and DCM® racks and most other
brands.
– Magnets ensure safe closing; in the event of a power
failure, the door can easily be opened manually.
– Standard access check with keypad (other systems
also available).
– Inside switch for routine exit.
– VdS-compliant emergency switch inside; height of
switch < 1 meter.
– VdS-compliant emergency switch outside for rescue
purposes.
– Door contact switch for monitoring "door open" –
"door closed".
Finish
– Final digit of order number .1: powder-coated,
RAL 7035 light-grey.
– Final digit of order number .8: powder-coated,
RAL 7021 dark-grey.
Scope of delivery
– 1 x frame.
– 2 x doors.
– 2 x floor guides.
– 1 x rack monitoring system.
– 1 x Electrical closing system.
– 1 x Covers.
– 1 x Sealing material.
– 1 x Mounting kit.
How supplied
C
lear door opening
– Width: at least 950 mm.
– Height: 2080 mm.
– In sets.
Material
– Door components: sheet steel.
–O
bservation window: single safety-glass panel.
– Brush strips: polyamide (UL94 HF-1).
H
AW
Order No.
UP
2000
1200
03.029.029.X
1 set
2200
1200
03.029.029.X
1 set
CAC20003
Dimensions in mm:
132
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
UP = Packaging unit
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
Vertiv™ SmartAisle™ Double Door
with Automatic Door Closer
Description
– Used in cold aisle containment for aisle widths: 1200 /
1500 / 1800 mm (± 50 mm).
– Quick and easy mounting.
– Suitable for MIR® and DCM® racks and most other
brands.
– Integrated automatic/mechanical door closer (opening
angle 180°, stop angle approx. 120°; door closes
automatically from approx. 100°).
Clear door opening
– Width: 1200 mm.
–H
eight: 2100 mm (for rack height 2000 mm); 2300
(for rack height 2200).
CAC20008
Finish
– Final digit of order number .1: powder-coated,
RAL 7035 light-grey.
– Final digit of order number .8: powder-coated,
RAL 7021 dark-grey.
Scope of delivery
– 1 x door frame.
– 2 x doors.
– 3 x design covers.
– 2 x door closers.
– 1 x Mounting kit.
How supplied
– In sets.
Material
– Door frame: aluminum.
– Door components: sheet steel.
– Observation window: single safety-glass panel.
– Brush strips: polyamide (UL94 HF-1).
H
AW
Order No.
UP
2000
1200
03.028.021.X
1 set
2200
1200
03.028.022.X
1 set
2000
1500
03.028.041.X
1 set
2200
1500
03.028.042.X
1 set
2000
1800
03.028.046.X
1 set
2200
1800
03.028.047.X
1 set
Vertiv SmartAisle Front Panel
CAC20009
Description
– Used in cold aisle containment for aisle widths: 1200 /
1500 / 1800 mm (± 50 mm).
– Alternative to cold aisle door.
– Quick and easy mounting.
– Suitable for MIR® and DCM® racks and most other
makes.
– Final digit of order number .8: powder-coated,
RAL 7021 dark-grey.
Material
– Sheet steel.
How supplied
– In sets.
Scope of delivery
– 1 x bracing bracket.
– 2 to 4 panels.
– 1 x Mounting kit.
Finish
– Final digit of order number .1: powder-coated,
RAL 7035 light-grey.
H
AW
Order No.
UP
2000
1200
03.029.031.X
1 set
2200
1200
03.029.032.X
1 set
2000
1500
03.029.034.X
1 set
2200
1500
03.029.035.X
1 set
2000
1800
03.029.037.X
1 set
2200
1800
03.029.038.X
1 set
133
VERTIV™ SMARTAISLE™
Vertiv™ SmartAisle™ Top Cover Plate
CAC20010
Description
– Used in cold aisle containment for aisle widths: 1200
/ 1500 / 1800 mm (± 50 mm).
– Quick and easy mounting.
– Suitable for MIR® and DCM® racks and most other
brands.
– With rubber sleeves for cable routing.
– Top cover plate with low fire load and smoke
generation (optionally with compound safety glass).
– Top cover plate(s) can be removed quickly and
easily.
– Equipped with SensorBOX for energy-efficient
operation of the recirculated air cooling devices and
for preventing hot spots.
Clear aisle height
– Rack height 2000 mm: 2150 mm.
–R
ack height 2200 mm: 2350 mm.
Scope of delivery
– 2 x angular extrusions with air regulation opening.
– 1 x separator strip for L 300/600/800, 3 x separator
strips for L 2400.
– 1 x top cover plate for L 300/600/800, 3 x top cover
plates for L 2400.
– 2 x angular extrusion plates.
– 1 x Mounting kit.
How supplied
– In sets.
Important Note
When using Vertiv Knürr DCM® racks, please also
order corresponding adjustment plates.
Note
Please also order correct number of SensorBOXes for
the recirculated air cooling devices' control system.
Material
– Angular extrusion, cross brace: sheet steel.
–T
op cover plate: polycarbonate,
UL94 V-0/DIN 4102 B1.
Finish
– Final digit of order number .1: powder-coated,
RAL 7035 light-grey.
– Final digit of order number .8: powder-coated,
RAL 7021 dark-grey.
134
L
AW
Order No.
UP
300
1200
03.029.120.X
1 set
600
1200
03.029.123.X
1 set
800
1200
03.029.126.X
1 set
2400
1200
03.029.129.X
1 set
300
1500
03.029.121.X
1 set
600
1500
03.029.124.X
1 set
800
1500
03.029.127.X
1 set
2400
1500
03.029.130.X
1 set
300
1800
03.029.122.X
1 set
600
1800
03.029.125.X
1 set
800
1800
03.029.128.X
1 set
2400
1800
03.029.131.X
1 set
Vertiv™ SmartAisle™ End Separator Strip
Description
– Used in cold aisle containment for aisle widths: 1200
/ 1500 / 1800 mm (± 50 mm).
– Quick and easy mounting.
– For connecting the door component or front panel.
Scope of delivery
– 2 x end separator strips.
– 1 x Mounting kit.
How supplied
– Single items.
CAC20011
Material
– Sheet steel.
Finish
– Final digit of order number .1: powder-coated,
RAL 7035 light-grey.
– Final digit of order number .8: powder-coated,
RAL 7021 dark-grey.
AW
Order No.
UP
1200
03.029.010.X
1 pair
1500
03.029.011.X
1 pair
1800
03.029.012.X
1 pair
Vertiv SmartAisle Separator Strip
for Aisle Fire Extinguisher for Vertiv SmartAisle Top Cover Plate
CAC20012
Description
– For gas extinguisher in cold aisle.
–R
ubber sleeve for covering piping, and/or the
nozzles in the cold aisle.
– Screw fitting for securing the piping to the cold-aisle
containment.
– Equipped with SensorBOX for energy-efficient
operation of the recirculated air cooling devices as
well as to prevent hot spots.
Material
– Sheet steel.
Finish
– Final digit of order number .1: powder-coated,
RAL 7035 light-grey.
– Final digit of order number .8: powder-coated,
RAL 7021 dark-grey.
Scope of delivery
– 1 x separator strip for aisle fire extinguisher.
– 1 x Mounting kit.
How supplied
– In sets.
L
AW
Order No.
UP
200
1200
03.029.115.X
1 set
200
1500
03.029.116.X
1 set
200
1800
03.029.117.X
1 set
Dimensions in mm:
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
UP = Packaging unit
135
VERTIV™ SMARTAISLE™
Vertiv™ SmartAisle™ Sliding-door Wall-mount
Prepared for Automatic Door Closers
Description
– For a cold aisle containment between rack row and
wall.
– For an aisle width of 900 to 1200 mm (± 50 mm).
– Quick and easy mounting.
– Suitable for MIR® and DCM® racks and most other
brands.
CAC00NEU
Finish
– Final digit of order number .1: powder-coated,
RAL 7035 light-grey.
– Final digit of order number .8: powder-coated,
RAL 7021 dark-grey.
Scope of delivery
– 1 x frame.
– 2 x doors.
– 2 x floor guides.
– 1 x Covers.
– 1 x Sealing material.
– 1 x Mounting kit.
Clear door opening
– Width: 860 mm (mechanical door closer); 820 mm
(electrical door closer).
– Height: 2080 mm.
Material
– Door components: sheet steel.
–O
bservation window: single safety-glass panel.
– Brush strips: polyamide (UL94 HF-1).
How supplied
– In sets.
Note
Please order the requisite closers (electric or
mechanical).
H
AW
Order No.
UP
2000-2200
900-1200
03.029.190.X
1 set
Electric Sliding-door Closer Wall-mount
Scope of delivery
– 1 x electric drive.
– 1 x cover.
– 1 x Mounting brackets.
– 1 x Mounting kit.
Technical data
– Power supply: 230 V / 50 - 60 Hz.
– Opening speed: 0.4 m/s.
– Closing speed: 0.2 m/s.
– Automatic closing time, adjustable: 0 to 30 s.
– Force: 30 N.
Description
CAC00NEU
– Compatible with Vertiv SmartAisle™ sliding door wallmount.
– Increases energy efficiency as doors closes
automatically.
– Opens with "push & go".
– Closes with "push & go" or automatically (0 to 30
seconds).
– Opener/closer contact for control (e.g. fire alarm
system).
Material
– Sheet steel.
How supplied
Finish
– Final digit of order number .1: powder-coated,
RAL 7035 light-grey.
– Final digit of order number .8: powder-coated,
RAL 7021 dark-grey.
136
– Single items.
Order No.
UP
03.029.192.X
1 set
Mechanical Sliding-door Closer Wall-mount
Description
Scope of delivery
– Suitable for Vertiv SmartAisle™ sliding door wallmount.
– Increases energy efficiency as doors open and close
automatically.
– Stop function when open.
– 2 x sets of gas pressure springs.
– 1 x cover.
– 1 x Mounting brackets.
– 1 x Mounting kit.
Technical data
CAC00NEU
– Force: 20 N.
Material
– Sheet steel.
How supplied
– Single items.
Finish
– Final digit of order number .1: powder-coated,
RAL 7035 light-grey.
– Final digit of order number .8: powder-coated,
RAL 7021 dark-grey.
Order No.
UP
03.029.193.X
1 set
Vertiv™ SmartAisle™ Top Cover Plate Wall-mount
CAC00NEU
Description
– Used in cold aisle containment for aisle width 1200
mm (± 50 mm).
– Quick and easy mounting.
– Suitable for MIR® and DCM® racks and most other
brands.
– With rubber sleeves for cable routing.
– Top cover plate with low fire load and smoke
generation (optionally with compound safety glass).
– Top cover plate(s) can be removed quickly and easily.
– Equipped with SensorBOX for energy-efficient
operation of the recirculated air cooling devices and
for preventing hot spots.
Clear aisle height
– Rack height 2000 mm: 2150 mm.
– Rack height 2200 mm: 2350 mm.
Scope of delivery
– 2 x angular extrusions with air regulation opening.
– 1 x separator strip for W 300/600/800, 3 x separator
strips for L 2400.
– 1 x top cover plate for W 300/600/800, 3 x top cover
plates for L 2400.
– 2 x angular extrusion plates.
– 1 x Mounting kit.
How supplied
– In sets.
Important Note
When using Knürr DCM® or MIR® 2 racks, please also
order corresponding adjustment plates.
Note
Please also order correct number of Sensor-BOXes for
the recirculated air cooling devices control system.
Material
– Angular extrusion, cross brace: sheet steel.
–T
op cover plate: polycarbonate, UL94 V-0/DIN 4102 B1.
Finish
– Final digit of order number .1: powder-coated,
RAL 7035 light-grey.
– Final digit of order number .8: powder-coated,
RAL 7021 dark-grey.
L
AW
Order No.
UP
300
1200
03.029.195.X
1 set
600
1200
03.029.196.X
1 set
800
1200
03.029.197.X
1 set
2400
1200
03.029.198.X
1 set
137
VERTIV™ SMARTAISLE™
Vertiv™ SmartAisle™ DCM® Adjustment Shim
used with Vertiv Knürr DCM® Racks
CAC20013
Description
– Spacer between DCM® rack and cold aisle
containment.
Scope of delivery
– 1 x adjustment shim.
Material
– Sheet steel.
How supplied
– In sets.
Finish
– Final digit of order number .1: powder-coated,
RAL 7035 light-grey.
– Final digit of order number .8: powder-coated,
RAL 7021 dark-grey.
CAC20014
W/L
For rack type
Order No.
300
DCM®
03.029.134.X
UP
1 set
600
DCM®
03.029.135.X
1 set
800
DCM®
03.029.137.X
1 set
1000
DCM®
03.029.139.X
1 set
CAC20015
Vertiv SmartAisle SensorBOX
for SmartAisle™ Top Cover Plates
Description
– Suitable for air regulation opening of the top cover
plates.
– As per patented control-system principle designed for
energy-efficient operation of the cooling system.
– Prepared for Liebert® temperature sensor.
– Compatible with a variety of sensors.
CAC20016
Material
– Sheet steel.
CAC20017
138
Finish
– Final digit of order number .1: powder-coated,
RAL 7035 light-grey.
– Final digit of order number .8: powder-coated,
RAL 7021 dark-grey.
Scope of delivery
– 1 x SensorBOX.
– 1 x Mounting kit.
How supplied
– In sets.
Order No.
UP
03.029.132.X
1 set
Vertiv™ SmartAisle™ Filler Panel
Description
– For sealing off the compartments without racks in the
suite.
– Quick and easy mounting.
– Variable height; can be used for total rack heights of
1990 to 2220 mm.
– Several filler panels can be set up in a row.
Material
– Sheet steel.
Finish
– Final digit of order number .1: powder-coated,
RAL 7035 light-grey.
– Final digit of order number .8: powder-coated,
RAL 7021 dark-grey.
Scope of delivery
– 1 x filler panel (two parts).
– 1 x Mounting kit.
How supplied
– In sets.
CAC20018
W/L
H
Order No.
UP
300
2000 / 2200
03.029.055.X
1 set
600
2000 / 2200
03.029.056.X
1 set
800
2000 / 2200
03.029.058.X
1 set
CAC20019
Dimensions in mm:
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
UP = Packaging unit
139
VERTIV™ SMARTAISLE™
Vertiv™ SmartAisle™
Height Trim
Vertiv SmartAisle Sealing Set
for 4.8 meter Aisle Length
–For adjusting the separation of the
cold and hot areas in smaller racks.
DCM20057
–Suitable for installation in MIR® rack.
–For sealing the leveling area between the floor and
the rack.
–For sealing MIR® rack suites without side panels.
Material
– Sheet steel.
LUF20336
Finish
– Final digit of order number .1:
powder-­coated, RAL 7035 light-grey.
– Final digit of order number .8:
powder-­coated, RAL 7021 dark-grey.
Scope of delivery
– 1 x height trim.
– 1 x Mounting kit.
How supplied
– In sets.
Material / Color
– Foam element: PUR ether UL94 HF-1, black.
– Cover extrusion: PVC extruder extrusion, black.
Scope of delivery
– 10 meters of foam 40 x 25 mm.
– 31 meters cover extrusion.
How supplied
– In sets.
LUF20328
Note
Where there are several adjacent height panels,
please request the corresponding angular extrusion
plates.
W
H
For rack type
Order No.
UP
300
221
DCM®
03.029.140.X
1 set
600
221
DCM®
03.029.141.X
1 set
600
200
MIR®
03.029.051.X
1 set
800
221
DCM®
03.029.143.X
1 set
800
200
MIR®
03.029.052.X
1 set
1000
221
DCM®
03.029.145.X
1 set
W
For rack type
Order No.
UP
4800
MIR®
03.029.040.9
1 set
Vertiv SmartAisle Sealing Set
for 4.8 meter Aisle Length
–Suitable for sealing gaps (e. g. in the leveling area
between floor and rack, between racks, etc.).
Material / Color
– PUR ether (UL94 HF-1), black.
Scope of delivery
– 5 x 2 meters of foam.
How supplied
– In sets.
DCM20047
Vertiv SmartAisle Protective
Brackets for Top Cover Plate
–Prevents Plexiglas panels from lifting up
when there is excess pressure.
–Enables safe pressure equalization in the event of a
malfunction or while a fire is being extinguished.
DCM20131
LUF20383
140
Material
– Sheet steel.
Finish
– Final digit of order number .1:
powder-­coated, RAL 7035 light-grey.
– Final digit of order number .8:
powder-­coated, RAL 7021 dark-grey.
Scope of delivery
– 1 x pair of protective brackets.
– 1 x Mounting kit.
How supplied
– In sets.
Order No.
UP
03.029.041.X
1 set
Size
Order No.
UP
40 x 40 (adhesive surface) mm
03.029.042.9
1 set
20 x 20 (adhesive surface) mm
03.029.043.9
1 set
5 x 10 (adhesive surface) mm
03.029.044.9
1 set
25 x 40 (adhesive surface) mm
03.029.045.9
1 set
Vertiv™ SmartAisle™ Open Mesh
Flooring Plate for Raised Floors
Vertiv SmartAisle Raised Floor
Air Barrier for Cable Entry
– Used in raised floors.
–Can be used with high heat loads and high coolingair requirements per rack.
–For energy-efficient operation of the recirculated air
cooling devices.
– Stiffener distance 33 x 16 mm.
DSC00318
LUF20334
Material
– Steel, zinc-passivated.
Finish
– Final digit of order number .1:
powder-­coated, RAL 7035 light-grey.
– Final digit of order number .8:
powder-­coated, RAL 7021 dark-grey.
–For cable entry from the raised floor.
–Lowered into raised floor, or can be mounted on top.
–Two-row tight brushes for pressure-resistant coldhot separation.
–For new cutouts and as add-on to existing cutouts.
–Two-piece – easy extend and retrofit option.
–The length can easily be shortened on-site (metal
saw).
–Also suitable for cabling on the rack wall (U-shape,
two pieces).
–Slot-in – and additional threaded connection.
Standards
Produced as per RAL-GZ 638.
– Load capacity as per DIN EN 12825
– On supports: class 1A, deflection under
instantaneous working load (2 kN) and 2C (3kN);
measured at the center of plate.
– On supports and control-room profiles: deflection
under instantaneous working load 2A (3kN).
LUF20301
S
cope of delivery
– 1 x pair of raised floor air barriers.
– 1 x Mounting kit.
How supplied
– In sets.
Scope of delivery
– 1 x open mesh flooring plate for raised floor.
Technical data
– Size 598 x 598 x 40 mm (W x L x H).
– Free cross-section: 77 %.
– Max. surface load 50,000 N/m2 with even
distribution; – Max. point load (on surface 200 x 200 mm) 4,500
N.
Dimensions
03.028.211.9:
– External dimension (270 mm x 220 mm).
– Usable cable entry (200 mm x 126 mm).
– Raised floor cutout (240 mm x 180 mm).
03.028.212.9:
– External dimension (600 mm x 220 mm).
– Usable cable entry (530 mm x 126 mm).
– Raised floor cutout (570 mm x 180 mm).
LUF20302
How supplied
– Single items.
Note
Suitable for raised floors with 40 mm panel heights.
Order No.
UP
03.029.090.X
1 unit
W
H
for type
Order No.
UP
270
220
Length, 270 mm
03.028.211.9
1 set
600
220
Length, 600 mm
03.028.212.9
1 set
Dimensions in mm:
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
UP = Packaging unit
141
VERTIV™ SMARTAISLE™
Customized Vertiv™ SmartAisle™ Containment
Customized – Retrofitting Solution from Vertiv™
Data center structures are often the result of ongoing changes and modifications
spanning a number of years.
Features
Precision fit on racks and rack rows.
Suitable for retrofitting heterogeneous
data centers.
Combined with standard Vertiv
SmartAisle™.
The racks have different dimensions and they are not always positioned in a line. Knürr offers
this solution based on a profile construction that can be made on site to correspond to the
precise dimensions of a given data center.
With the customized solution, the dimensions are measured on site and the profiles and panels
for the containment are cut and assembled to meet precise
requirements. The panels are normally cut outside the data center in a
designated area.
If possible, the customized elements are combined with standard components. As a rule,
standard sliding or hinged doors are used. The standard top cover plate is generally used, thus,
customized elements are only used to fill the gaps between the racks.
On
st
reque
142
Free-Standing Vertiv™ SmartAisle™ Containment
Free-Standing – Vertiv's Special Solution
Free-Standing System
Features
Can be flexibly adjusted to racks with
non-standard dimensions.
For racks and applications that are
exchanged at intervals.
Combined with standard Vertiv
SmartAisle™.
In many data centers, so-called "free-standing systems" are installed in addition to the server
racks. These often non-standard racks are regularly exchanged at defined intervals (usually one
to three years).
Free-standing systems may include storage cabinets, cluster applications (e.g. IBM, SUN) or
server racks (e.g. IBM, HP, SUN, etc.). There are a number of reasons for delivering a complete
package including the racks. For storage applications, one of the main reasons is product liability.
Cluster applications are usually leased and with server applications, the reasons are often
marketing-related.
The challenge facing the SmartAisle™ for free-standing systems is to construct a flexible cold
aisle containment, allowing a modular and fast exchange of these free-standing systems.
The free-standing cold aisle containment solution is based on standard Vertiv SmartAisle™
products and used in combination with these. The panels for the free-standing solution can be
customized in both dimensions (height and width) according to the rack dimensions.
On
st
reque
143
VERTIV™ SMARTAISLE™
Vertiv™ SmartAisle™ Containment SwitchTubes
Switch Tubes – Switch Cooling from Vertiv™
Cooling switches
Switches have special requirements.
Cooling/ventilation
Mostly lateral air flow (from right to
left, from left to right, from left and
right toward the rear, including many
other directions)
 switches draw in warm air.
Power requirements for cooling are
often high (up to over 10 kW per
switch).
Max. permitted input air temperature
Max. permitted input air temperature is
approx. 37° to 40°C
 Probably higher inlet temperatures
in efficient cold/warm separation
environment.
 High energy consumption for cooling.
Cabling
Large cable volumes.
Fan units free from cabling; repair work
can be performed during operation.
Air flow should have be free of cables.
For cooling purposes, servers draw in cold air from the front and blow heated air out at the rear.
By contrast, switches mainly draw the cold air in from the side and blow air out either laterally
or at the rear. Since cooling problems arise in racks equipped with consistent hot/cold
separation, Special airflow systems are required for switch applications to ensure reliability and
energy efficiency.
The Vertiv SmartAisle switch tube is a flexible and safe add-on to the complete SmartAisle
program. Various standard products are available for the
respective switch types.
SwitchTubes – controlled switch cooling
Servers are usually cooled from the front to the rear, in line with modern and energyefficient data center requirements. However, cooling
direction for switches most often occurs from the side. In this application, the switches
draw the cooling air out of the warm area.
The SwitchTube provides air for the switch from the cold aisle, where heated air is directed into
the warm aisle..
Mechanics
Various heights (1 U to approx. 24 U).
Various depths, where air can be drawn
in from different areas.
ertiv offers a large range of switch tubes
V
for the most common switch types.
Features
No hot spots.
Suitable airflow routing.
Utilized in energy-efficient data center.
Air flow in switch rack for switches
equipped with lateral cooling.
144
Vertiv™ SmartAisle™ 19" SwitchTube
LUF2036003.029.217.X
Description
– For cooling a core switch from the cold aisle.
–C
an be used with or without a raised floor.
– Provides energy-efficient cooling for laterally cooled
switches.
– Cooling air drawn in from cold aisle (ideally with
containment).
– Suitable for both Knürr MIR® and DCM® racks; width of
rack 800 mm.
– Space requirement: 3 or 6 U of the 19" installation
space.
– Suitable for a number of switch heights.
– Installation height of switches in rack can be adjusted.
– Perforated front panel to the air intake units prevents
the exhaust of paper, etc. in the tube.
– Note: cold/warm separation in rack is required.
Material
– Tube: sheet steel.
– High-density foam: PUR ether foam (UL94 HF-1).
LUF2037903.029.217.X
Finish
– Final digit of order number .1: powder-coated,
RAL 7035 light-grey.
– Final digit of order number .8: powder-coated,
RAL 7021 dark-grey.
Scope of delivery
– 2 x air intake units incl. perforated front panel (for 12 –
21 U models)
– 1 x air intake unit incl. perforated front panel (for 7 – 12
U / 4 – 6 U models).
– 1 x adjustable depth lateral air duct.
– 1 x High-density foam.
– 1 x Mounting kit.
How supplied
– In sets.
Important Note
Suitable for cooling max. 2-7 kW thermal load (at
∆T = 13 K) per switch tube (see table on the next page).
Important Note
With many switches, part of the front air-intake
perforation is covered (as these are generally located
near the front, directly behind the front 19" extrusion).
Important Note
May not be suitable for switches with different cooling
directions.
Note
Retrofitting may not be applied due to cables and other
accessories.
WRack
Application
For rack type
Order No.
UP
800
Core switch 12 - 21 U
MIR®, DCM®
03.029.217.X
1 set
800
Core switch 12 - 21 U
MIR®, DCM®
03.029.218.X
1 set
800
Core switch 7 - 12 U
MIR®, DCM®
03.029.213.X
1 set
800
Core switch 7 - 12 U
MIR®, DCM®
03.029.215.X
1 set
800
Core switch 4 - 6 U
MIR®, DCM®
03.029.214.X
1 set
800
Core switch 7-12U
MIR®, DCM®
03.029.219.X
1 set
LUF2035803.029.213.X
LUF2037703.029.215.X
LUF2035903.029.214.X
LUF2037503.029.213.X
LUF2037803.029.215.X
LUF2037603.029.214.X
145
VERTIV™ SMARTAISLE™
LUF2035403.029.218.X
Air-intake area
Item number
Switch height
[U]
Max. cooling
Max. air-intake area
depth in mm
(Distance to 19" level)
Compatible with
03.029.217.X
12-21
approx. 7 kW (ΔT = 13 K)
per switch tube
460
CISCO Catalyst 6506(-E),
6509(-E), 6513, MDS 9509 Director
03.029.218.X
12-21
approx. 7 kW (ΔT = 13 K)
per switch tube
600
CISCO NEXUS 7009
03.029.213.X
7-12
approx. 2 kW (ΔT = 13 K)
per switch tube
320
CISCO Catalyst 4503(-E), 4506(-E), 4507R(-E),
4510R(-E)
03.029.215.X
7-12
approx. 4 kW (ΔT = 13 K)
per switch tube
600
Cisco Nexus 7004
03.029.214.X
4-6
approx. 4 kW (ΔT = 13 K)
per switch tube
550
CISCO Catalyst 6503(-E), 6504(-E)
03.029.219.X
7-12
approx. 4 kW (ΔT = 13K)
per switch tube
460
Cisco CATALYST 6807-XL, Enterasys S4
Dimensions in mm:
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
146
LUF2038003.029.218.X
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
UP = Packaging unit
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
Chassis Runner Tube T740
D
escription
– F or supporting switches during installation in rack.
– S upports weight of switches during installation and
fitting in rack.
– Can be used with SmartAisle™ 19" switch tubes 12 - 21 U.
– S uitable for insertion depth of 740 mm.
– S uitable for all 19" extrusions.
– S uitable for CISCO Catalyst 6506(-E), MDS 9509
Director.
LUF20364
W
U
DRack
130
3
from 900 740
Material / Finish
– Sheet steel, 2.0 mm, zinc passivated.
S
cope of delivery
– 2 x chassis runners.
– 1 x Mounting kit.
H
ow supplied
– In pairs.
For insertion depth
Order No.
UP
03.029.230.7
1 pair
LUF20365
LUF20366
Vertiv™ SmartAisle™ SwitchTube Back-to-front
for Switches with back-to-front Cooling
– Final digit of order number .8: powder-coated,
RAL 7021 dark-grey.
D
escription
– F or 1 U switches with back-to-front cooling.
– E xtractable – can be used for different switch depths.
– S uitable for various insertion depths.
–C
ompatible with both MIR® and DCM® racks.
– S uitable for Enterasys SSA 180.
LUF20372
cope of delivery
S
– 1 x air intake unit.
– 2 x rear support brackets.
– 1 x High-density foam.
– 1 x Edge protector.
– 1 x Mounting kit.
Material
–T
ube: sheet steel.
–H
igh-density foam: PUR ether foam (UL94 HF-1).
How supplied
– In sets.
Finish
– F inal digit of order number .1: powder-coated,
RAL 7035 light-grey.
LUF20373
W
H
U
For insertion depth
Model
Order No.
UP
450
87.5
2
600–750
for Switches with 1U height
03.029.212.X
1 unit
450
132
3
600–750
for Switches with 2U height
03.029.207.X
1 unit
LUF20374
147
VERTIV™ SMARTAISLE™
Vertiv™ SmartAisle™ 19" SwitchTube
for Switch Heights 1 U /2 U /3 U
LUF20356
LUF20368
03.029.210.X
03.029.210.X
LUF20369
03.029.210.X
LUF20357
03.029.211.X
LUF20370
03.029.211.X
LUF20371
03.029.211.X
148
D
escription
– For 1 U, 2 U or 3 U switches with lateral cooling.
– Can be used in racks with front-to-back cooling.
– Extractable – can be used for different switch
depths.
– Front or rear installation possible.
– Suitable for different cooling directions (from left
to right, from right to left or from right and left
toward the rear).
– Suitable for different insertion depths from 560 to
755 mm.
– Compatible with both MIR® and DCM® server
extrusions.
– Suitable for rack widths of 600, 700, 800 and 1000.
– Suitable for CISCO Catalyst 3750, Juniper EX3200,
Juniper EX4200.
Material
–T
ube: sheet steel.
–H
igh-density foam: PUR ether foam (UL94 HF-1).
Finish
– Final digit of order number .1: powder-coated,
RAL 7035 light-grey.
– Final digit of order number .8: powder-coated,
RAL 7021 dark-grey.
Scope of delivery
– 1 x air intake unit.
– 2 x lateral air ducts.
– 1 x side cover.
– 1 x High-density foam.
– 1 x Mounting kit.
How supplied
– In sets.
Note
Retrofitting may not be applied due to cables and
other accessories.
W
H
U
For insertion depth
Model
Order No.
UP
440
88.1
2
560 - 755
for 1 U switch
03.029.210.X
1 unit
440
132.5
3
560 - 755
for 2 U switch
03.029.211.X
1 unit
440
177
4
560 - 755
for 3 U switch
03.029.208.X
1 unit
Vertiv™ SmartAisle™ SwitchRack
for Cisco Nexus 7018
Description
– For installing a CISCO Nexus 7018 at a height of 7 U
to 31 U.
– Based on DCM® rack.
– Rack width 1000 mm as per CISCO requirements for
adequate cooling air.
– Prevents hot-spots (air recirculation).
– 200 mm clearance space for orderly cabling.
– Includes cold/warm plates for reliable and energyefficient operation.
– Cold air drawn in from cold aisle.
LUF20362
Scope of delivery
– 1 x basic frame.
– 4 x 19" server extrusions, sheet steel incl. U marking.
– 2 x side panels with quick connectors.
– 1 x top cover with cable entry (three-piece sliding
plates can also be opened completely).
– 1 x front door, double, perforated, with handle and
mounting for cylinder lock.
– 1 x rear door, double, perforated, sheet steel, with
handle and mounting for cylinder lock.
– 1 x complete air separation unit (left plate with 3 x 2
U 19" cutouts, right plate with air duct).
– 4 x leveling feet.
– 1 x complete grounding set (VDE 0100).
M
aterial / Finish
– Basic rack, extruded aluminum, polished.
– Corner piece, die-cast aluminum, polished.
– Doors, sheet steel, powder-coated texture.
– Covers, zinc-passivated sheet steel, powder-coated
texture.
– PUR ether foam (UL94 HF-1).
How supplied
– Mounted.
Note
Also order mounting adapter for 19" server extrusion
to mount Knürr accessories (01.147.640.9).
Color
– Final digit of order number .1: visible surface of
covers RAL 7035 light-grey.
– Final digit of order number .8: visible surfaces of the
covers RAL 7021 dark-grey.
W
H
D
U
Recess depth
Insertion depth
Model
Order No.
UP
1000
2000
1200
42
200
740
DCM®
03.029.222.X
1 unit
LUF20363
Dimensions in mm:
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
UP = Packaging unit
149
VERTIV™ SMARTAISLE™
Vertiv™ SmartAisle™ Raised Floor SwitchTube
LUF20355
Description
– For cooling a core switch from the raised floor.
–P
rovides energy-efficient cooling for laterally cooled
switches.
– Cold air drawn in from raised floor.
– Compatible with Vertiv Knürr® MIR® rack: width
800 mm (NOT for DCM® rack).
– Suitable for different switch heights.
– Installation height of switches in rack can be adjusted;
tool-less blanking plates for covering areas outside of
switches.
– Air-duct area: 420 cm2.
– Size of cutouts in raised floor (min./max.): 355/410 x
127/162 mm.
– Note: Cold/warm separation in rack is required.
– Note: for max. switch air-intake depth from 460 mm
(distance to 19" level).
– Suitable for CISCO Catalyst 6509(-E), Catalyst 6513,
Catalyst 6506(-E), MDS 9509 Director, HP ProCurve
8212.
Scope of delivery
– 1 x air duct with blanking plates (1 U, 3 U).
– 1 x bottom plate.
– 1 x Sealing material.
– 1 x Mounting kit.
How supplied
– In sets.
I mportant Note
– Suitable for cooling max. 4 kW thermal load (at
∆T = 13 K) per switch tube.
– The tube covers part of the front air-intake perforation
with many switch types (as these are generally located
near the front, directly behind the front 19" extrusion).
– May not be suitable for switches with different cooling
directions.
– The uppermost 3 U in the rack cannot be used for
cooling.
Note
Retrofitting may not be applied due to cables and other
accessories.
Material
– Tube: sheet steel.
– High-density foam: PUR ether foam (UL94 HF-1).
F
inish
– Final digit of order number .1: powder-coated,
RAL 7035 light-grey.
– Final digit of order number .8: powder-coated,
RAL 7021 dark-grey.
W
H
Item
For rack type
Order No.
800
2000
Tube
MIR®
03.029.200.X
1 set
800
2200
Tube
MIR®
03.029.202.X
1 set
LUF20367
Dimensions in mm:
150
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
UP = Packaging unit
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
UP
COOLING
Vertiv™
Rack Cooling Solutions
All issues and arguments to date can be summarized under three main criteria for assessing data center infrastructure.
1. Availability
2. Efficiency
3. Adaptability
The key issue for all data centers is
availability. Maximum computing power,
rapid access or lowest costs, are of little use
if availability is
jeopardized by uncertainties, failures or even
lengthy downtimes.
A customer who can rely on the
availability will still be dissatisfied if this
availability is achieved at the
expense of efficiency. Efficiency must be
seen as a multi-purpose term.
Efficiency covers:
Availability and efficiency are only
sufficient if planning, project management
and implementation is short term rather than
sustainable.
Data center services users, whether
it be in-house or a customer that
outsources its computing power, will only
remunerate the finest computing technology
(including cloud computing) if they can rely
one hundred
percent on the availability of the data they
need.
The functionality of technical processes, e.g.
expressed in the efficiency of the cooling or
power supply.
With Vertiv™ data center infrastructure, you
are always in a position to achieve the
degree of availability that matches your
scope of work.
other important factors are:
Building costs
Consequential costs for recirculation
facilities
Consequential costs for power supply
Efficiency of the cooling and power supply
facilities
Consumption values and costs for
operating equipment
Monitoring, service and repair costs.
Cost effectiveness in terms of both
investment and running costs. When we talk
about investment, it is not just the pure
equipment investment that matters;
imely efficiency in relation to
T
processing speed and the period from data
provision to data output.
Future-proofing and adaptability for Vertiv
are also crucial factors in the development
and delivery of data center infrastructure.
Future-proofing redners data center
infrastrucutre operational even:
there is a demand for increased computing
capacity
the heat loads caused by new server types
– or changes to the proportions of different
server types – are increased or
redistributed
current flow and speed, volume flow or the
pressure ratios are changed.
Products from Vertiv are future-proof and
provide an appropriate and efficient
response.
Adaptability delivers highly efficient results
even during planning and
project management and is, naturally, also
part of future-proofing.
151
VERTIV™ KNÜRR® DCD
152
Vertiv™ Knürr® DCD
Cooling Door for Maximum Energy Efficiency
ENP DCD is an air-water heat exchanger that is integrated in the rear door of a server
rack. The heat exchanger is designed to absorb heat loads of up to 35 kW from server
racks.
Compact solution for new and existing data centers.
Highest possible energy efficiency with shortage of fans.
Supports cold-room concept.
Permanent water circulation piping can be routed through water-carrying hinges.
Opened Vertiv Knürr DCD
153
VERTIV™ KNÜRR® DCD
Special water-bearing hinge
Water-connection fitting for the top
Pressure drop (in H2O)
Pressure drop (Pa)
Air flow (m3/h)
35Pa can be handled in servers with typical fans
6
20
100
24
PUE = 2
50
2
Electrical losses
Air circulation
Cooling
IT equipment
154
8
10
Lighting
100
Condensate pan
Vertiv™ Knürr® DCD
Benefits
Air flow (cfm)
PUE = 1,2
Condensation-water discharge fittings
Availability
– No additional fans are required for cooling; fan failure
is no longer an issue.
– System is highly reliable.
– Fewer sources of failure.
– No additional fans needed; thus no heat is wasted.
–G
uaranteed 35 kW cooling.
–M
inimal air pressure drop for cooling air.
– Conduit and collector for condensate water in the
event of the temperature dropping below dew point.
Condensate water is discharged via a flexible 5/8"
hose attached to a male coupling.
Efficiency
– Optimal space utilization through ultra compact
design and hence very low room costs.
– Lowest possible pressure loss in water cooling
circulation: only 54 kPa minimizes energy
consumption of pumps.
– Minimal pressure loss in cooling air flow through
optimized heat exchanger structure and linear air
paths without bends: no energy costs incurred by
additional fan for cooling unit.
Adaptability
– Standard heights for 2000 and 2200 mm (42 / 47U).
– S tandard widths 600, 700 and 800 mm.
– Top or bottom cold-water connection (field can be
adjusted).
– Using a special adapter frame, the Vertiv Knürr DCD
cooling door is compatible with server racks from
other manufacturers.
Vertiv™ Knürr® DCD
Configurations
Vertiv™ Knürr® DCD open without trim
Server rack cooling components with Vertiv Knürr DCD cooling door
Server rack air flow with Vertiv Knürr DCL (cross-section)
Vertiv™ Knürr® DCD / DCM Basic Specifications
Cooling-air side
Housing material
Sheet steel (powder-coated)
Operating ambient temperature
10 ° C ÷ 35 ° C (50 ° F - 95 ° F) (other temperatures available upon on request)
Max. absolute humidity on site
8 g/kg
Air outlet temperature (as per ASHARE)
18 ° C ÷ 27 ° C (64.4 ° F - 80.6 ° F)
Air temperature difference - OFF
15 K ÷ 20 K
Cold-water side
Cooling power
35 kW
Cold water inlet temperature
12 ° C ÷ 18 ° C (53.6 ° F - 64.4 ° F) (other temperatures available upon on request)
Cold water outlet temperature
18 ° C ÷ 24 ° C (64.4 ° F - 75.2 ° F) (other temperatures available upon on request)
Max. operating pressure
10 bar (145 psi)
Pipe connection IN / OUT
1" female (on frame) (DIN ISO 228-1)
155
VERTIV™ KNÜRR® DCD
Vertiv™ Knürr® DCD
Configuration number
Model number – Part 1/2
1
2
3
4
5
D
C
D
3
5
6
Detail of model
7
8
9
10
11
12
1. – 5.
Basic unit
Vertiv Knürr DCD is an air-water exchanger that is integrated into the rear door of
a server rack. The heat exchanger serves to absorb heat loads from server
racks up to 35kW. Thereby, it can be configured in such way that no thermal loads are released
to the installation area.
6.
Rack height
A – 2000 mm
B – 2100 mm
C – 2200 mm
7.
Rack width
6 – 600 mm
7 – 700 mm
8 – 800 mm
8.
Rack type
0 – No rack
3 – 3rd party rack adapter
A – Predisposition for DCM rack
9.
CW connection – hinge possition
1 – top left
2 – top right
3 – bottom left
4 – bottom right
10.
Rack depth
0 – No rack
E – 1000 mm
F – 1100 mm
G – 1200 mm
11.
Front Door
0 – No rack
C – One wing perforated right
G – Double wing perforated
L – One wing perforated left
X – Rack without front door
12.
19" rails front
0 – No rack
A – S ymmetric with air seperation and additional vertical U slots (Width 800 mm)
B – Symmetric with air separation (Width 600 mm)
L–A
symetric with air separation and additional vertical U slots (Width 700/800 mm)
13.
19" rails back side
0 – No rack
A – S ymmetric with air seperation and additional vertical U slots (Width 800 mm)
B – Symmetric with air separation (Width 600 mm)
L–A
symmetric with air separation and additional vertical U slots (Width 700/800 mm)
S – Symmetric without air seperation (Width 600 mm)
Y – Asymmetric without air seperation (Width 700/800 mm)
14.
Bottom Plate
0 – No rack
L – Cable entry for levelling feet
R – Cable entry for castors
156
13
14
15
16
Part 2/2
17
18
19
15.
Plinth
0 – No rack
A – Plinth H100 mm
B – Plinth H200 mm
F – Levelling feet
R – with castors (no plinth available)
16.
Color
1 – RAL 7035 (light-grey)
G – RAL 7021 (black-grey)
17.
Rack side panels
0 – No rack, without side panels
B – With both side panels
18.
19" front side jumpering depth
0 – None
A – 80 mm
D – 123 mm
19. – 20.
Free
21.
Packaging
P – Short distance (pallet, shrink wrap)
S – Long distance (Wooden box)
22.
SFA – special features
A – No SFA
X – SFAs included
23. – 25.
Free
20
21
22
23
24
25
Vertiv™ Knürr® Chilled Water Connecting Kit
u
ret
Application
– Simple connection to water circulation, simple start-up.
rn
w
f lo
Consists of
– Two flexible armored tubes, stainless steel plated,
water-resistant and frost-resistant EPDM. Nickelplated pipe connections.
inl
et
w
f lo
To the coolingwater system
Temperature range
– 0 – 110° C.
Operating pressure
– Max. 10 bar.
Draining and purging valve with nipple for measurement device connection (3/4", female) (for measuring water flow rate)
– 31 mm.
Connections
– Threaded connection, 1 1/4"(or 1"), flat sealing.
Length
– 1500 mm.
Ball valve connections
– 1 1/4" (or 1").
Shut-off and control valves with 3/4" draining and purging
connection and a nipple for measuring pressure and temperature.
Connections: 1 1/4" (or 1").
Inner diameter
Description
Order No.
Cold-water connection kit 5/4"
080090910
Cold-water connection kit 1"
080090660
Ball valve
Shut-off and control valves
(to set the volumetric flow rate)
To DCD
– R1"
To building chilled water
connection – variable
Example of Connecting kit adapter
Connecting adapter kit
Consists of:
– Two flexible pipes respectively for supply and return
feed to increase the distance between the chilled
water supply and return connection to the building
and adapt its interface type.
Length
– 300 mm.
Description
Order No.
Pipe DN25 L300 R1" x 1" NPT
400005321
Pipe DN25 L300 R1" x Rp 1"
400005325
Pipe DN25 L300 R1" x Rp 5/4"
400005326
157
VERTIV™ KNÜRR® POWERTRANS2®
Vertiv™ Knürr® PowerTrans2®
Power Distribution Rack
Features
The Vertiv Knürr PowerTrans2 has a
modular design with a versatile plug-in
units that can be used as required.
Plug and Play:
Only the main feed must be installed
by a qualified electrician.
The Vertiv Knürr PowerTrans2 forms the interface between the low-voltage power
supply and rack PDUs as well as further components for supplying servers and other IT
devices.
Rack basics: connecting the Vertiv Knürr DCM rack and the existing PowerTrans2 19" plug-in
units simply involves slotting the elements into a free slot and securing them. The rack is then
immediately connected to the power supply. The power is distributed via the individual slot-in
units, avoiding installation within the building.
The plug-in units can be inserted
during operation; there are no
downtimes.
Elementary model:
Power distribution unit without
metering.
Metered version:
Power distribution unit offers extensive
metering functions with a high level of
accuracy (up to ±1 %).
Highest power density:
up to max. 346 kVA.
PowerTrans2: 19" slot-in
Input Power
Max. 250 A per phase.
1 ph. or 3 ph. feed.
Max. 2 feeds per rack.
Output Distributor
230/400V – 32A via IEC 60309 socket.
230/400V – 16A via GST 18 socket.
230V – 32A via IEC 60309 socket.
230V – 16A via GST18 socket.
Modularity
Output distributors can be installed as
modules during running operation.
10.3
10.3A
1-1
A
1-1
119.5V 4.32kW 5.17kVA
119.5V 4.32kW 5.17kVA
12345
12345
IP
IP
10.3
10.3A
1-1
A
1-1
119.5V 4.32kW 5.17kVA
119.5V 4.32kW 5.17kVA
12345
12345
158
IP
IP
10.3
10.3AA
1-1
1-1
119.5V 4.32kW 5.17kVA
119.5V
1 2 3 4 5 4.32kW 5.17kVA
12345
Monitoring
Input level.
Vertiv™ Knürr® PowerTrans2®
Power distribution unit between
Liebert® APM™ UPS system and MPX rack PDUs
Vertiv MPX adaptive
rack PDUs
Liebert® APM™ UPS system
Power distribution rack
Vertiv™ Knürr® PowerTrans2®
Feed B
Feed A
Benefits
Two feeds (A + B) available for each rack.
Optimum power distribution from the Liebert APM UPS system to the MPX rack PDUs.
Each phase input from the Vertiv Knürr PowerTrans2 is monitored and evaluated.
The Vertiv Knürr PowerTrans2 Basic can be populated with a maximum of 9 plug-in units, while the metered version can be populated with a maximum of 8 plug-in units.
Minimal footprint due to a rack width of 600 mm.
159
VERTIV™ KNÜRR® POWERTRANS2®
Vertiv™ Knürr® PowerTrans2® 19" Power Distribution Rack
Elementary and Monitored type
– Feed of 2 separate 3-phase 400V mains, L1, L2, L3,
N, PE.
– Each with a 250 A circuit breaker in the input.
– Distribution to the individual plugs via busbars and
contact-safe plug-in connections.
– Up to 8 (Monitored) / 9 (Elementary) slot-in units
where A feed and B feed are possible.
Color
– RAL 7021 dark-gray.
Monitored type
– Provides the following phase-input data: voltage,
current, effective power, consumption and
frequency.
– Power alarm functions for the individual phases and
their operating status are also supported.
Scope of delivery
– 1 x rack with covers, front door, rear door.
– 1 x set of safe-contact busbars, for A feed and B
feed.
– 2 x circuit breakers, max. 250 A.
– 1 6 x (Monitored type) / 18 x (Elementary type)
power supply plugs for the slot-in units wired on the
busbars.
– 1 x 19" PowerTrans2 metering slot-in unit (Monitored
type).
– 2 x 19" T-slot extrusions.
– 18 x chassis runners.
– 1 x complete earthing set.
Technical data Interfaces
– RJ-45 LAN port (10/100 MBit) – for connecting to
local network (LAN) via an Ethernet cable.
– Serial interface: RS485.
– Remote management: Onboard Web Interface,
SNMPv1,2,3, SSH and Syslog can be integrated into
Vertiv Nform & Vertiv Trellis as well as Nagios or
other management software programs.
Vertiv Knürr PowerTrans2
160
Material / Finish
– Basic rack, extruded aluminum, polished.
– Corner piece, die-cast aluminum, polished.
– Perforated front door.
– Rear door, double, closed.
– Covers, zinc-passivated sheet steel, powder-coated
texture.
W
H
D
U
Model
Cable entry
Order No.
UP
600
2000
1000
42
Elementary
Below
03.014.600.8.004
1
600
2000
1100
42
Elementary
Below
03.014.600.8.005
1
600
2000
1200
42
Elementary
Below
03.014.600.8.006
1
600
2200
1000
47
Elementary
Below
03.014.600.8.010
1
600
2200
1100
47
Elementary
Below
03.014.600.8.011
1
600
2200
1200
47
Elementary
Below
03.014.600.8.012
1
600
2000
1000
42
Monitored
Below
03.014.601.8.004
1
600
2000
1100
42
Monitored
Below
03.014.601.8.005
1
600
2000
1200
42
Monitored
Below
03.014.601.8.006
1
600
2200
1000
47
Monitored
Below
03.014.601.8.010
1
600
2200
1100
47
Monitored
Below
03.014.601.8.011
1
600
2200
1200
47
Monitored
Below
03.014.601.8.012
1
600
2000
1000
42
Elementary
Above
03.014.602.8.004
1
600
2000
1100
42
Elementary
Above
03.014.602.8.005
1
600
2000
1200
42
Elementary
Above
03.014.602.8.006
1
600
2200
1000
47
Elementary
Above
03.014.602.8.010
1
600
2200
1100
47
Elementary
Above
03.014.602.8.011
1
600
2200
1200
47
Elementary
Above
03.014.602.8.012
1
600
2000
1000
42
Monitored
Above
03.014.603.8.004
1
600
2000
1100
42
Monitored
Above
03.014.603.8.005
1
600
2000
1200
42
Monitored
Above
03.014.603.8.006
1
600
2200
1000
47
Monitored
Above
03.014.603.8.010
1
600
2200
1100
47
Monitored
Above
03.014.603.8.011
1
600
2200
1200
47
Monitored
Above
03.014.603.8.012
1
Vertiv™ Knürr® PowerTrans2® 19" Slot-in Power Distributor
–Power distributor slot-in for PowerTrans2 rack.
–Also functions without PowerTrans2 rack if used with
a suitable connection cable.
–19" slot-in housing.
–Width 19".
–Height: 3 U.
–Depth: 480 mm.
–Color: RAL 7021 dark-gray.
–2 separate 3-phase inputs with max. 63 A phase
current (feed A + feed B).
–Outputs are shown in the table below.
–Backups: 1-pole (for single-phase) or 3-pole (for
3-phase). 2-pole or 4-pole backups aviable upon
request.
PowerTrans2
Inputs
Outputs
Phase tap
per feed
Order No.
Feed A
Feed B
L1-N, L2-N, L3-N
6 x 230Vac 16 A GST 18i3
6 x 230Vac 16 A GST 18i3
03.014.011.8.002
L1-N, L2-N
2 x 230Vac 32 A IEC60309 1ph/N/PE 6h
2 x 230Vac 32 A IEC60309 1ph/N/PE 6h
03.014.011.8.005
L2-N, L3-N
2 x 230Vac 32 A IEC60309 1ph/N/PE 6h
2 x 230Vac 32 A IEC60309 1ph/N/PE 6h
03.014.011.8.006
L3-N, L1-N
2 x 230Vac 32 A IEC60309 1ph/N/PE 6h
2 x 230Vac 32 A IEC60309 1ph/N/PE 6h
03.014.011.8.007
L1-N, L2-N, L3-N
3 x 230/400Vac 3 x16 A GST18i5
3 x 230/400Vac 3 x 16 A GST18i5
03.014.012.8.002
L1-N, L2-N, L3-N
2 x 230/400Vac 3 x 32 A IEC60309 3ph/N/
PE 6h
2 x 230/400Vac 3 x 32 A IEC60309 3ph/N/
PE 6h
03.014.012.8.003
Vertiv Knürr PowerTrans2 Connection Cable
–Connection cable between
19" power distributor slot-in and rack PDUs
Length
Input connector
Output socket
Order No.
5000
230Vac 16 A GST 18i3
230Vac 16 A IEC60320 C19
03.014.013.9.001
5000
230Vac 16 A GST 18i3
230Vac 16 A IEC60309 1ph/N/PE 6h
03.014.013.9.003
5000
230/400Vac 3 x 16 A GST 18i5
230/400Vac 3 x 16 A IEC60309 3ph/N/PE 6h
03.014.014.9,001
5000
230Vac 32 A IEC60309 1ph/N/PE 6h
230Vac 32 A IEC60309 1ph/N/PE 6h
On request
5000
230/400Vac 3 x 32 A IEC60309 3ph/N/PE 6h
230/400Vac 3 x 32 A IEC60309 3ph/N/PE 6h
03.014.014.9.003
10000
230VAc 16 A GST 18i3
230VAc 16 A IEC60320 C19
03.014.013.9.002
10000
230Vac 16 A GST 18i3
230Vac 16 A IEC60309 1ph/N/PE 6h
03.014.013.9.004
10000
230/400Vac 3 x 16 A GST 18i5
230/400Vac 3 x 16 A IEC60309 3ph/N/PE 6h
03.014.014.9.002
10000
230Vac 32 A IEC60309 1ph/N/PE 6h
230Vac 32 A IEC60309 1ph/N/PE 6h
On request
10000
230/400Vac 3 x 32 A IEC60309 3ph/N/PE 6h
230/400Vac 3 x 32 A IEC60309 3ph/N/PE 6h
03.014.014.9.004
161
VERTIV™ – POWER DISTRIBUTION UNITS
Rack PDUs Vertiv™ MPX™, Vertiv MPH2™ and Vertiv MPE
Your product range for the highest data center demands
The key aspects of this product range are:
H
igh availability for connected electrical loads.
Optimized energy and capacity management.
Simplified integration into management tools.
Simplified physical and electrical installation.
Overview: Vertiv Rack PDUs for Europe
Vertiv MPX-Adaptive Rack PDU
Features
MPX-R
MPX-B
Vertiv MPH2-Managed Rack PDU
MPX-I
Vertiv MPE Rack PDU
MPH2-R
MPH2-M
MPH2-C
MPH2-B
MPE
Modular
Remote interface
*
Measurement
per phase
*
Measurement
per group
Measurement
per output
Switching per
output
Measurement
parameters
Input
Outputs
Sensor
connections
A, V, W, kWh, VA, Hz,
power factor,
crest factor
A, V, W, kWh, VA, Hz,
power factor
A, V, W, kWh, Hz
A, V, W, kWh, VA, Hz,
power factor, crest
factor
A,V,W,kWh, VA, Hz,
power factor,
crest factor
A,V,W,kWh, VA, Hz,
power factor
A,V,W,kWh, VA, Hz,
power factor
1 ph + 3 ph
max. 63 A
1 ph + 3 ph
max. 63 A
1 ph + 3 ph
max. 63 A
1 ph + 3 ph
max. 32 A
1 ph + 3 ph
max. 32 A
1 ph + 3 ph
max. 32 A
1 ph + 3 ph
max. 32 A
1 ph + 3 ph
max. 63 A
IEC C13 & C19 Schuko
Schweiz GST18
IEC C13 & C19
IEC C13 & C19
IEC C13 & C19
IEC C13 & C19
IEC C13 & C19 Schuko
IEC C13 & C19 Schuko IEC C13 & C19 Schuko
*
The range of Vertiv MPX and Vertiv MPH2 accessories is almost identical, which simplifies administration!
* Only in conjunction with Vertiv MPX-PEM monitored.
162
Vertiv™ Knürr® DIS Rack PDU® Socket System
Your product range to cover basic requirements in all areas
The key aspects of this product range are:
Robust design with the highest level of quality.
Cost effective thanks to flexible and simple assembly.
Numerous designs for all application areas in IT,
network technology, laboratories, and in the home.
Overview: Vertiv™ Knürr® DIS Rack PDU® for Europe
Features
Knürr DIS Rack PDU I
Knürr DIS Rack PDU D
Knürr DIS Rack PDU E
A, V, W, kWh, VA, Hz, power factor
A, V, W, kWh, VA, Hz, power factor
1 ph + 3 ph
max. 32 A
1 ph + 3 ph
max. 32 A
1 ph + 3 ph
max. 32 A
IEC C13 & C19 Schuko, Frankreich, Schweiz
IEC C13 & C19 Schuko, Frankreich, Schweiz
IEC C13 & C19 Schuko, Frankreich, Schweiz
Local display
Remote interface
Measurement per phase
Measurement parameters
Input
Outputs
163
VERTIV™ MPX™
Vertiv™ MPX™ – Adaptive Rack PDU
Respond to change and maximize profits
No-one can make definite predictions about the power-supply demands the future will bring. But one thing is certain: the versatile, adaptive Vertiv™ MPX™ rack PDUs equip you with the wherewithal to face all eventualities. They enable you to react quickly to changes in
rack equipment and provide dynamic capacities, offering:
Modular hot-swap-enabled output power
Modular hot-swap-enabled communication
Modular input power.
Benefits of Vertiv MPX
Adaptive capacity, distribution, monitoring,
control and administration of critical
equipment.
Flexibility in reacting to constant changes
– modules can be regrouped to
accommodate altered requirements.
Only purchase what you really need and
utilize existing investments.
Reliable communication.
Developed for critical environments
Critical rack operating temperature – of up to 60° C suitable for high temperatures
inside racks.
Accurate voltage and current metering with tolerances of ±1 % offer a comprehensive
overview.
Energy and power metered with outstanding precision all the way through to output level.
Extensive alert function; including notification before failure occurs.
Monitoring of environment conditions including alerts and alarms.
Notification upon failure or if individual components are removed.
Flexible, configurable input and output
distribution
The scalable design of the MPX rack PDU
allows on-site configuration that meets the
current requirements of the IT equipment. It
is the perfect solution for coping with the
ever increasing demands of expanding data
centers. You can set up your IT equipment at
another location or add new components to
extend your environment. All you need to do
in this case is simply reconfigure the power
supply and the power distribution.
Hot-swap-enabled
output module
Simple implementation
for quick start-up of IT
equipment.
Equipped to face the demands of today
and tomorrow
The MPX rack PDU supports a variety of
configurations for single-phase and threephase power inputs enabling changes while
retaining the distribution infrastructure.
Outputs and modules
Outputs can be controlled
and measured remotely
thereby increasing flexibility
and on-site security.
Modular input power
Can be reconfigured for altered power demands; single-phase
and three-phase input.
Module can be fitted on top or at the bottom.
164
The busbar (MPX™ PRC):
Serves as power and communication
distribution for all supported modules.
Available in two heights to accommodate
different rack heights.
Output module (MPX™ BRM):
Provides overload protection by distributing power to individual servers.
Available functions: Elementary, Branch Metering and Output Metering with
switch function.
Power-rail spacer:
Reserves unused space until needed for
an MPX™ module.
BDM™ local display module
Extended diagnostic functionality; customerconvenient display. Features include detailed
information about alerts and specific labeling for
outputs.
SN sensors:
Consolidates environmental monitoring of temperature, humidity
and potential-free input contacts with the power supply at rack
level.
Communication module (RPC2):
Input module (MPX™ PEM):
Routes the input power to the busbar system of the Elementary
model (without RPC2™) and the version with input metering
(includes pre-installed RPC2™).
Installed in the power input module and offers an
extendable interface for network commu nication,
sensors and the local display.
165
VERTIV™ MPX™
Vertiv™ MPX™
Benefits of the modular Vertiv MPX rack PDU
INPUT POWER
Configurable: 20 to 60 A (USA); 16 to
63 A (EU).
Single-phase and three-phase.
Cable routing possible from above and
below.
OUTPUT DISTRIBUTOR
Scalable, combination-compatible and
can be replaced during operation
Single-phase NEMA 5-20R, IEC-C13,
IEC-C19, Schuko, Switzerland, GST18.
Load balance.
MODULARITY
Input modules.
Output modules.
External display.
External sensors.
RPC2 communication card.
MONITORING
Three levels: Input level, module level,
output level.
Temperature and humidity.
Door contacts and floating break input
contacts.
REMOTE CONTROLLED SOCKETS
Socket level.
Featuring High Availability
Heat resistant up to 60° C ensuring reliable operation in the warm aisle.
Modular hot-swap-enabled output module, controller card and sensors; can be exchanged
or updated during operation.
Special switch relay (normally closed); connected servers have an uninterrupted power
supply even in the event of failure.
Redundant power supply for control electronics.
Fixed databus on the busbar.
Complete data tapping on the Power Entry Module (PEM) without any additional external
monitoring devices.
Proactive alert by additional metering of the neutral conductor and crest factor
(assessment of network quality facilitating early detection of power-supply unit failures).
Maximum Flexibility and Scalability
All modules configured in line with requirements (patented quick-mount fitting for safe
installation).
One busbar for different networks and power levels – input module can be freely selected.
All other components are "hot-swap-enabled" when running operation.
Mobile display for reading all MPX data on the rack.
Optical slot-space display (easy server slot-space identification at the push of a button).
Highest Possible Power Levels in all Areas
Power feed of max. 3 x 63 A; optimal for Blade server applications.
Only one IP address for up to 4 rails with 24 modules.
Plug and Play for numerous sensors.
Extensive monitoring with a metering accuracy of ±1 % right through to output level.
Module and sensor autodetect function with operating software.
Minimal power loss for MPX systems.
166
Vertiv™ MPX™
Four equipment models for different requirements
The Vertiv™ MPX™ modular rack PDU
consists of various components.
The basic element is a busbar, which is
responsible for the power and
communication distribution to the
individual modules. The input power is
routed via the MPX Power Entry Module
(MPX PEM) to the MPX system.
Different output modules (MPX Branch
Receptacle Modules, MPX BRM) are
available depending on
requirements. Four different variants can
be set up depending on the component
population of the busbars:
1. Vertiv MPX Elementary
Modular basic power distribution without
metering and control function. An upgrade
to another equipment model is quick and
easy.
2. Vertiv MPX Elementary Phase
Monitored
Modular power distribution with metering on
input. An upgrade to a superordinate line is
possible by populating with appropriate
output modules.
3. Branch-Monitored Vertiv MPX
Modular power distribution with metering on
input and each output module.
An upgrade or downgrade to another line is
possible if installed with
appropriate output modules.
4. Receptacle Managed Vertiv MPX
Modular power distribution with input,
metering, each output module and each
output. Individual outputs can also be
switched on and off remotely.
A downgrade to another line is possible if
installed with the appropriate output modules.
A combination of the "Elementary Phase
Monitored", "Branch-Monitored" and
"Receptacle Managed" lines on a shared
busbar is also possible and is one of the
exceptional features of the MPX. Interfaces for
the network communi­cation, sensors and/or
local display are provided by the Rack PDU
Card (RPC)
in the MPX PEM. The RPC Card enables
connection to an optional RPC Basic Display
Module (RPC BDM) to display local status and
alerts.
Output module
Receptacle Managed
Busbar (MPXT PRC)
Distributes power and
communication signals to
all modules.
Branch-Monitored
output module
(Vertiv MPX BRM)
Spacer for busbars
Fills unused gaps until a
Liebert MPX module is
upgraded.
Output module
e. g. Elementary
(MPX BRM)
Input module
(Vertiv MPX PEM)
Routes input power and
data (depending on the
module type) to the
busbar system.
167
VERTIV™ MPX™
Vertiv™ MPX™ – Configuration models in Europe
Four equipment models
Order number
Length 1035
MPXPRC-V1035XXX
Length 1880
MPXPRC-V1880XXX
Length 2144
MPXPRC-V2146XXX
1ph 16A fest
MPXPEM-EHABXS30
Input Modules
3ph 16A fixed
3ph 32A fixed
3ph 63A fixed
Elementary
Output Modules
Branch-Monitored
Output Modules
Receptacle
Managed
Output Modules
Sensors
External Display
Vertiv MPX
Branch-monitored
MPXPEM-EHAEXQ30
MPXPEM-EHABXQ30
MPXPEM-EHAEXT30
MPXPEM-EHABXT30
MPXPEM-EHAEXR30
MPXPEM-EHABXR30
MPXPEM-EHBEXZ30
MPXPEM-EHBBXZ30
IEC-C13 L1
MPXBRM-EEBC7N1N
IEC-C13 L2
MPXBRM-EEBC7N2N
IEC-C13 L3
MPXBRM-EEBC7N3N
IEC-C19 L1
MPXBRM-EEBC4O1N
IEC-C19 L2
MPXBRM-EEBC4O2N
IEC-C19 L3
MPXBRM-EEBC4O3N
Schuko L1
MPXBRM-EEBC3P1N
Schuko L2
MPXBRM-EEBC3P2N
Schuko L3
MPXBRM-EEBC3P3N
Switzerland T23
MPXBRM-EEBC4S1N
Switzerland T23
MPXBRM-EEBC4S2N
Switzerland T23
MPXBRM-EEBC4S3N
GST18
MPXBRM-EEBC9U1N
GST18
MPXBRM-EEBC9U2N
GST18
MPXBRM-EEBC9U3N
IEC-C13 L1
MPXBRM-EBBC6N1N
IEC-C13 L2
MPXBRM-EBBC6N2N
IEC-C13 L3
MPXBRM-EBBC6N3N
IEC-C19 L1
MPXBRM-EBBC4O1N
IEC-C19 L2
MPXBRM-EBBC4O2N
IEC-C19 L3
MPXBRM-EBBC4O3N
Schuko L1
MPXBRM-EBBC3P1N
Schuko L2
MPXBRM-EBBC3P2N
Schuko L3
MPXBRM-EBBC3P3N
IEC-C13 L1
MPXBRM-ERBC6N1N
IEC-C13 L2
MPXBRM-ERBC6N2N
IEC-C13 L3
MPXBRM-ERBC6N3N
IEC-C19 L1
MPXBRM-ERBC4O1N
IEC-C19 L2
MPXBRM-ERBC4O2N
IEC-C19 L3
MPXBRM-ERBC4O3N
Schuko L1
MPXBRM-ERBC3P1N
Schuko L2
MPXBRM-ERBC3P2N
Schuko L3
MPXBRM-ERBC3P3N
1xTemp.
SN-Z01
3xTemp.
SN-Z02
3xT. + 1xHum
SN-Z03
1xTemp. Mod.
SN-T
Temp/Hum Mod.
SN-TH
2xDoor Mod.
SN-2D
3xInput Mod.
SN-3C
RPCBDM-1000
Different combinations available
168
Vertiv MPX
Receptacle Managed
*Note: One-phase input modules can only be populated with L1 modules.
1ph 32A fixed*
Vertiv MPX
Elementary
Phase monitored
Upgrade possible
Busbar
Vertiv MPX
Elementary
Vertiv™ MPX™ – Input Module/Power Supply
Elementary and Monitored type
–The MPX PEM is fixed on the MPX PRC and provides
the connection to the power supply.
–Fixed-connection cable; 3 m long.
–With IEC60309 plug, 1Ph/N/PE 6h blue, 3Ph/N/PE 6h
red.
DOS20153
Monitored type
–The MPX PEM provides connection to the databus for
data communication.
–Integrated RPC2 communication card enables remote
monitoring and maintenance of the MPX modules.
–Provides the following phase-input data: voltage,
current, effective power, consumption and frequency.
–Power alarm functions for individual phases and their
operating status are also supported.
–Further important features: Three displays inform the
user on the current status of each individual input. An
acoustic alarm is activated at certain overload
conditions.
–The communication card centralizes the MPXs local
and remote administration.
–Serves as the connection point for versatile support
options and devices, such as the display module (RPC
BDM), various sensors and connection to other MPX™
or MPH2™ systems, for example.
–Has RJ-45 ports for all connections (except USB port)
and does not require any special cabling.
Technical Data Interfaces:
– RJ-45 LAN port (10/100 MBit) – for local network
(LAN) connection via an Ethernet cable.
– Expansion / administration port for local
configuration using a computer / laptop, for creating
a link-up of several PDUs (MPX or MPH).
– Serial interface RS232.
– Display port for connecting the RPC BDM (display
module).
– External sensor port for connecting optional
sensors.
– Remote management: Onboard Web interface, CLI,
SNMPv1,2,3, SSH, Telnet Syslog, compatible with
Avocent ACS, UMG & MPU, Vertiv SiteScan, DSView,
Rack Power Manager, Vertiv Nform & Vertiv Trellis
as well as Nagios or other management software
programs.
– Authentication: local, remote: Active Directory, LDAP,
TACACS, Radius, Kerberos.
– Encryption: MD5, AES, DES.
Material / Finish
– Enclosure: aluminum.
– Cover: sheet steel.
– Power contacts: silver-plated.
– Databus contacts: gold-plated (only Monitored type)
Dimensions
– Width: 75 mm.
– Height: 65 mm.
– Feed cable: 3 m.
Color
– Enclosure: aluminum/RAL7021 dark-gray
Certification
– CE label in accordance with:
– Low Voltage Directive 2014/35/EU
– EMC Directive 2014/30/EU
– RoHS Directive 2011/65/EG.
– Bureau-Veritas BG - Certificate (Factory Inspection).
– Bureau-Veritas CB - Certificate.
Scope of delivery
– 1 x MPX PEM power input module.
– Including connection cable.
– Including RPC2 communication card (only
Monitored type).
L
W
H
Feed
Load rating
Type
Order No.
UP
220
75
65
Fixed
230 VAC, max. 32 A
Elementary
MPXPEM-EHAEXQ30
1 unit
220
75
65
Fixed
230/400 VAC, max. 16 A
Elementary
MPXPEM-EHAEXT30
1 unit
220
75
65
Fixed
230/400 VAC, max. 32 A
Elementary
MPXPEM-EHAEXR30
1 unit
266
75
65
Fixed
230/400 VAC, max. 63 A
Elementary
MPXPEM-EHBEXZ30
1 unit
220
75
65
Fixed
230VAC,max.16A
Monitored
MPXPEM-EHABXS30
1 unit
220
75
65
Fixed
230 VAC, max. 32 A
Monitored
MPXPEM-EHABXQ30
1 unit
220
75
65
Fixed
230/400 VAC, max. 16 A
Monitored
MPXPEM-EHABXT30
1 unit
220
75
65
Fixed
230/400 VAC, max. 32 A
Monitored
MPXPEM-EHABXR30
1 unit
266
75
65
Fixed
230/400 VAC, max. 63 A
Monitored
MPXPEM-EHBBXZ30
1 unit
Dimensions in mm:
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
Conversion:
U = Standard rack unit
kg = Weight
(1 U = 44.45 mm)
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
UP = Packaging unit
Replace .x with the number of the color combination you require: .1 = RAL 7035, .6 = RAL 7035/RAL 2003
169
VERTIV™ MPX™
Vertiv™ MPX™ BRM – Output Module
Color
– Enclosure: aluminum/RAL7021 dark-gray
–The MPX BRM enables the distribution
to the individual consumers.
–Each module taps a color-coded phase.
–All modules are protected against overload with a 20 A
circuit breaker.
–Modules can be exchanged during operation thereby
facilitating user-specific installation without having to
shut down the MPX.
–Up to 3 BRM output modules can be installed on a
1,035 mm PRC busbar; up to 6 BRM output modules can
be installed on a 1,880 mm PRC busbar.
DOS20153
Certification
– CE label in accordance with:
– Low Voltage Directive 2014/35/EU
– EMC Directive 2011/65/EG
– RoHS Directive 2011/65/EG.
– Bureau-Veritas BG - Certificate (Factory Inspection).
– Bureau-Veritas CB - Certificate.
Scope of delivery
– 1 x MPX PEM power output module.
– 1 x instruction manual.
Material / Finish
– Enclosure: aluminum.
– Cover: sheet steel.
– Power contacts: sliver-plated.
– Databus contacts: gold-plated (only type B and R).
Dimensions
– Width: 75 mm.
–H
eight: 65 mm.
Type E – Elementary
–Module for power distribution via respective outputs.
Type B – Branch-Monitored
–Module for power distribution via respective outputs
with metering function on module level.
–The MPX BRMs have LED ID indicator which identifies
every module with a number.
–Modules are administered in the software.
–Provides the following metered readings: voltage,
current, power, apparent power, kWh and power factor.
–Power alarm functions and operating status are
supported.
Type R – Receptacle Managed:
–Module for power distribution via respective outputs
with metering function on module level and output level.
–The MPX BRMs have LED ID indicator which identifies
every module with a number.
–Modules are administered in the software.
–Provides the following metered readings: voltage,
current, power, apparent power, kWh, frequency, power
factor and crest factor.
–Power alarm functions and operating status are
supported.
–Individual outputs can be switched on and off remotely.
170
L
n
Outputs
Load rating per output
Phase tap
Type
Order No.
266
7
IEC320 C 13
10 A
L1
E
MPXBRM-EEBC7N1N
UP
1 unit
266
7
IEC320 C 13
10 A
L2
E
MPXBRM-EEBC7N2N
1 unit
266
7
IEC320 C 13
10 A
L3
E
MPXBRM-EEBC7N3N
1 unit
266
4
IEC320 C 19
16 A
L1
E
MPXBRM-EEBC4O1N
1 unit
1 unit
266
4
IEC320 C 19
16 A
L2
E
MPXBRM-EEBC4O2N
266
4
IEC320 C 19
16 A
L3
E
MPXBRM-EEBC4O3N
1 unit
266
3
Schuko CEE 7/4
16 A
L1
E
MPXBRM-EEBC3P1N
1 unit
266
3
Schuko CEE 7/4
16 A
L2
E
MPXBRM-EEBC3P2N
1 unit
266
3
Schuko CEE 7/4
16 A
L3
E
MPXBRM-EEBC3P3N
1 unit
1 unit
266
4
Switzerland T23
16 A
L1
E
MPXBRM-EEBC4S1N
266
4
Switzerland T23
16 A
L2
E
MPXBRM-EEBC4S2N
1 unit
266
4
Switzerland T23
16 A
L3
E
MPXBRM-EEBC4S3N
1 unit
266
9
GST18 3-pole
16 A
L1
E
MPXBRM-EEBC9U1N
1 unit
266
9
GST18 3-pole
16 A
L2
E
MPXBRM-EEBC9U2N
1 unit
266
9
GST18 3-pole
16 A
L3
E
MPXBRM-EEBC9U3N
1 unit
266
6
IEC320 C 13
10 A
L1
B
MPXBRM-EBBC6N1N
1 unit
266
6
IEC320 C 13
10 A
L2
B
MPXBRM-EBBC6N2N
1 unit
1 unit
266
6
IEC320 C 13
10 A
L3
B
MPXBRM-EBBC6N3N
266
4
IEC320 C 19
16 A
L1
B
MPXBRM-EBBC4O1N
1 unit
266
4
IEC320 C 19
16 A
L2
B
MPXBRM-EBBC4O2N
1 unit
266
4
IEC320 C 19
16 A
L3
B
MPXBRM-EBBC4O3N
1 unit
266
3
Schuko CEE 7/4
16 A
L1
B
MPXBRM-EBBC3P1N
1 unit
266
3
Schuko CEE 7/4
16 A
L2
B
MPXBRM-EBBC3P2N
1 unit
266
3
Schuko CEE 7/4
16 A
L3
B
MPXBRM-EBBC3P3N
1 unit
1 unit
266
6
IEC320 C 13
10 A
L1
R
MPXBRM-ERBC6N1N
266
6
IEC320 C 13
10 A
L2
R
MPXBRM-ERBC6N2N
1 unit
266
6
IEC320 C 13
10 A
L3
R
MPXBRM-ERBC6N3N
1 unit
1 unit
266
4
IEC320 C 19
16 A
L1
R
MPXBRM-ERBC4O1N
266
4
IEC320 C 19
16 A
L2
R
MPXBRM-ERBC4O2N
1 unit
266
4
IEC320 C 19
16 A
L3
R
MPXBRM-ERBC4O3N
1 unit
266
3
Schuko CEE 7/4
16 A
L1
R
MPXBRM-ERBC3P1N
1 unit
266
3
Schuko CEE 7/4
16 A
L2
R
MPXBRM-ERBC3P2N
1 unit
266
3
Schuko CEE 7/4
16 A
L3
R
MPXBRM-ERBC3P3N
1 unit
Vertiv™ MPX™ PRC – Power Distribution Unit / Communication Bus
–The MPX PRC is the basic element of the
MPX power distribution unit.
–Power and data transfer buses are integrated across the
entire length of the MP PRC.
–The MPX BRMs (output modules) and the MPX PEM
(power input module) are fixed on the MPX PRC and,
depending on the type, facilitate the modules' power
feed, output, monitoring and management.
Approvals
– CE label in accordance with:
– Low Voltage Directive 2014/35/EU
– EMC Directive 2014/30/EU
– RoHS Directive 2011/65/EG.
– Bureau-Veritas BG – Certificate (Factory Inspection).
– Bureau-Veritas CB – Certificate.
Load rating
– Max. current: 3 x 63 A.
– Nominal voltage (L-N / L-L): 230 / 400 VAC.
Material / Finish
– Busbar housing: aluminum.
– Busbars: copper.
– Databus: gold-plated.
Scope of delivery
– 1 x MPX PRC - power distribution unit /
communication bus.
– 1 x mounting kit.
Dimensions
– Width: 68 mm.
– Height: 24 mm.
Color
– Enclosure: aluminum.
DOS20153
L
W
H
U
Model
Order No.
UP
1035
68
24
23
1 PEM (220 mm) + 3 BRM
MPXPRC-V1035XXX
1 unit
42
1880
68
24
2144
68
24
1 PEM (220/266 mm) + 6 BRM
MPXPRC-V1880XXX
1 unit
1 PEM (220/266 mm) +7 BRM
MPXPRC-V2146XXX
1 unit
Vertiv MPX™/MPH™/MPH2™/IMS™ – Sensors
DOS20153
–These sensors are designed for tool-less
installation in a Knürr Miracle / DCM rack, and is also
compatible with all other rack types.
–"Fixed" type sensors are attached to a cable.
–"Modular" type sensors can be connected to the delivered cable.
–Plugged into the RPC-1000 or RPC2 communication
card.
–Several sensors can be connected in rows.
–Automatically displayed in the MPX/MPH/MPH2/IMS
software.
–Temperature measurement range: 5 – 60° C.
–Accuracy: ± 0.5° C.
–Humidity measurement range: 10 – 95 %.
–Accuracy: ± 3.5 %.
Note
Sensors are not required for operating the MPX or MPH,
MPH2, IMS. However, a communication card is needed.
Scope of delivery
– 1 x sensor with connection cable.
– 1 x instruction manual.
Cable length
Type
Model
Order No.
UP
3660
Fixed
Temperature sensor, single
SN-Z01
1 unit
5180
Fixed
Temperature sensor, triple
SN-Z02
1 unit
5180
Fixed
Temperature sensor, triple + humidity sensor, single
SN-Z03
1 unit
2000
Modular
Temperature sensor, single
SN-T
1 unit
2000
Modular
Temperature sensor, single + humidity sensor, single
SN-TH
1 unit
2000
Modular
2 x door contact - input module*
SN-2D
1 unit
2000
Modular
3 x digital input
SN-3C
1 unit
* Suitable door contact switch: Order no.: 06.108.115.9
171
VERTIV™ MPX™
RPC BDM - 1000 Display Module
DOS20153
–Provides the local display of the monitored
data for all connected MPX/MPH/MPH2/IMS systems.
–Operated with a navigation switch.
–Connected via a cable with the RPC, enabling the user
to place the displays where they can be easily read in
the given local space conditions.
–An individual display can be used for up to four MPX/
MPH/MPH2/IMS PDUs, which are all connected in a
PDU array.
Note
The display module is not required when operating the
MPX or MPH, MPH2, IMS.
However, a communication card is needed.
Scope of delivery
– 1 x RPCBDM-1000 display module.
– 1 x connection cable 2 m.
– 1 x mounting kit.
Order No.
UP
RPCBDM-1000
1 unit
BRM Power-Distribution Cable-Holder Clip Set
DOS20444
–Cable clips provide strain relief
for the feed lines of the network equipment.
–Cable clips are suitable for most IEC-C13 socket plugs
with a raised edge. (Must be checked for suitability).
–Cable clips are sold in sets of 18 units.
Scope of delivery
– 1 x cable holder set (18 units).
How supplied
– In sets.
Note
– Optimal function only with cable connector
04.000.051.9.
– Can only be used with MPXBRM-EBBC6NxN and
MPXBRM-ERBC6NxN (x = 1 ,2, 3).
Order No.
UP
03.910.216.9
1 unit
Model
Order No.
UP
C20 plug in C19 socket
03.910.212.9 001
20 unit
Model
Order No.
UP
C14 plug in C13 socket
03.910.213.9 001
50 unit
395
SafetySleeve™ Cable Protection IEC C19
– SafetySleeves protect the feed lines of the
network equipment.
–They can be used on all C19 cables and fit onto all
PDUs.
DOS20493
Material / Finish
– PVC, black.
SafetySleeve™ Kabelausziehschutz IEC C13
– SafetySleeves protect the feed lines of the
network equipment.
–They can be used on all C13 cables and fit onto all
PDUs.
Material / Finish
– PVC, black.
DOS20494
172
RPC2 Communication Module for Vertiv™ MPX, MPH2 and IMS
–For retrofitting to existing MPX , MPH and IMS
products.
–The communication card can be upgraded during
operation.
RPC2-KIT
Technical Data Interfaces
– RJ-45 LAN port (10/100 MBit) – for local network
(LAN) connection via an Ethernet cable.
– Expansion / administration port for local configuration
using a computer / laptop, for creating a link-up of
several PDUs (MPX, MPH2 or IMS).
– Serial interface RS232.
– Display port for connecting the RPC BDM
(display module).
– External sensor port for connecting optional sensors.
– Remote management: Onboard Web interface, CLI,
SNMPv1,2,3, SSH, Telnet Syslog, compatible with
Avocent ACS, UMG & MPU, Vertiv SiteScan, DSView,
Rack Power Manager, Vertiv Nform & Vertiv Trellis as
well as Nagios or other management software
programs.
– Authentication: local, remote: Active Directory, LDAP,
TACACS, Radius, Kerberos.
– Encryption: MD5, AES, DES.
Order No.
UP
RPC2-KIT
1 unit
173
RPC2
Easy Integration into DCIM Systems
The rack PDUs Vertiv™ MPH2™ and MPX™ as well as the in-line metering system MPXIMS™ can be managed both locally and remotely.
Power data and sensor data are recorded
Conventional standardized protocols are used to ensure secure data transfer, management, and authentication.
As such, the products can be easily integrated into any existing network and any system architecture.
Flexible Local or Remote Management
Integrated standard displays on the DIS Rack PDU I and MPH2™
show all the key information required at the rack.
The optional local display BDM for the MPH2™ or MPX™ can be
mounted in different locations depending on where it can be read
most easily.
Remote communication thanks to the modular hotswappable RPC2™ card ensures seamless expansion
options and easy servicing
Support for up to four PDUs within a single rack PDU Array™:
Minimizes the number of IP addresses required.
Support for up to ten ambient sensors: Consolidates power and
environment monitoring at rack level.
Support for Web UI and CLI, with SSL and SSH: Windows, Linux, and
network administrators can use their preferred form of communication
with the rack PDU.
Support for all conventional remote authentication and encryption
protocols: Products can be seamlessly integrated into an existing
security infrastructure.
Support for SNMP v1, v2, and v3: Allows for secure communication via
network management systems.
Support for IPv4 and IPv6: Future-proof IP support for rack PDUs.
Data logging: All data is saved automatically, ensuring easy
troubleshooting without the need for additional external management
software.
"One-touch" configuration with USB stick directly on the device.
174
Power management with the following functions:
Snapshot of all electrical parameters at output, group, phase, and
general level.
Snapshot of the status and the measured values from the ambient
sensor.
Threshold configuration, alerts, and messages.
Control of individual outputs and groups.
Status information and configuration of all outputs.
Network management settings.
To enable central management of all rack PDUs within a data center,
the following software packages are available:
Vertiv Avocent Rack Power Manager, which includes access and
control functions to easily manage and monitor your PDUs.
Vertiv Trellis Express, which provides a comprehensive view of the
devices in the data center.
Vertiv Sitescan.
Vertiv Nform, which provides an overview of the health status of
relatively small to medium data centers.
Rack Power Manager boasts state-of-the-art monitoring functions
and allows intelligent server grouping over multiple racks. You also
benefit from customized reports and scheduled standard reports, and
have the option to define thresholds for real-time alarms. As such, you
obtain high-quality information about the power supply infrastructure
of your data center, thereby allowing you to make full use of the
investment in PDUs.
Power
costs are measured and monitored.
Historical data is checked in capacity and consumption reports.
The Vertiv™ Trellis™ platform is a pioneering DCIM innovation
from Vertiv. It not only reduces IT risks but also increases operational
efficiency, meaning it solves current problems and prepares you for
the future.
The real-time visualization, monitoring of the power
supply, and mobile access provided by the Vertiv Trellis
platform allow you to:
r
educe inefficiencies without interrupting current processes.
postpone investments as you make better use of existing resources,
thereby improving the operating profit.
improve Service Level Agreements with complete transparency
throughout the infrastructure.
gain a better insight into the data center and thus improve overall
efficiency.
Integration into the clear, easy-to-install Vertiv Nform™ status
monitoring software ensures the following:
Rack
PDUs are part of a consolidated monitoring solution for data
center infrastructure.
Virtually any component in critical support equipment can be
monitored.
Alerts and automatic actions in the event of a fault.
Event management.
Integration into the scalable Vertiv SiteScan® building
infrastructure management software ensures the following:
Rack PDUs are part of a consolidated monitoring solution for data
center infrastructure.
Virtually any component in critical support equipment can be monitored
and controlled.
Data analysis and trend reports.
Event management.
Make the Most of Your Rack PDU Investment
The rack PDUs MPX™, MPH2™, and MPXIMS™ can be fully integrated into the industry-leading KVM systems, serial consoles, and infrastructure management systems from Vertiv.
Integration into Avocent® Advanced Console Server,
MergePoint™ Unity KVM Switches and Universal
Management Gateway Appliances offers the following
advantages:
Rack PDUs are integrated into the out-of-band management solution.
Rack PDUs become part of a consolidated access and control solution.
The number of IP addresses required for managing the rack PDUs is
minimized.
The software provides secure, centralized out-of-band management of all
connected IT and network
devices in complex and geographically dispersed data centers.
DSView4 and rack PDUs together ensure:
Consolidated access to server control and the related access control.
Easy assignment of IT equipment to the relevant rack PDU outputs.
Integration into the management software
Avocent DSView™ 4, in which all data center
management functions are compiled on a
consolidated interface, allows for seamless
control of the data center for 24/7 operation.
175
VERTIV™ MPH2™
Vertiv™ MPH2™ – Managed Rack PDU
Monitoring and Control
The Vertiv MPH2 Managed Rack PDU is a power supply system with monitoring and control functions. The Vertiv MPH2 offers
outstanding features such as easy rack-integration and management architecture as well as optimum availability and energy efficiency.
Four Vertiv MPH2™ versions are available:
Model/functions
Vertiv MPHR
Vertiv MPHM
Vertiv MPHC
Vertiv MPHB
Input / Group measurement
Output measurement
Output switching
Benefits of Vertiv MPH2™
Monitors several parameters with defined thresholds and alarm
tools.
Monitors and controls individual outputs and/or load and appliance groups.
A variety of measurements allow you to predict failing conditions
before they occur and proactively manage connected equipment for
maximum uptime.
Energy and power metering maximize the data center power and
cooling infrastructure.
Lowest power consumption of all switched-rack PDUs lowers
power costs and thermal load.
Up to four rack Vertiv MPH2 PDUs can be connected in a Rack
PDU Array™ thereby consolidating user-specific IP connections and
equipment monitoring.
Vertiv MPH2 savings for a typical data center
Typical rack PDU
with 24 outputs
Vertiv
MPH2
Power consumption of PDU (in Watt)
20
5
Annual energy consumption of PDU
(kWh)
176
44
Total proportion of the data center's
energy consumption (kWh)*
333
83
Energy saving
75 %
Compared with a Switched Rack-PDU model for a typical data center with a
1.9 PUE.
* according to Energy Logic calculations
Developed for critical environments
Industry-leading operating temperature of up to 60° C suitable
for high temperatures inside racks.
Bistable relays ensure basic power supply even when shortfalls
occur elsewhere.
Accurate voltage and current metering up to outlet level with
±1 % tolerances deliver reliable results.
Extensive alarm functions including notification when an overload occurs in individual groups.
Monitoring of environment conditions (temperature, humidity
and input contacts) with alerts and alarms.
Notification upon failure or if loads are removed in individual racks.
kWh
333
75 % cost saving
83
Typical rack PDU
176
Vertiv MPH2TM
INPUT POWER
16 to 32 A (EU).
Single-phase and three-phase.
OUTPUT DISTRIBUTOR
IEC C13 and IEC C19.
Combination systems.
MODULARITY
Communication card.
External display.
External sensors.
MONITORING
Three various levels: Input level, group level, output level
Temperature and humidity.
Door contacts and potential-free input contacts.
REMOTE CONTROLLED SOCKETS
Socket level.
177
VERTIV™ MPH2™
Vertiv™ MPH2™
Benefits
Highest availability levels
Modular communications card; can be replaced during operation.
This simplifies maintenance and increases the level of availability.
Bistable relays in switchable designs; the server's power supply is
ensured even during outages.
Software-controlled overload protection – affected outputs are
switched off before the advance fuse is activated.
Additional metering of the neutral conductor and of the crest
factor; possible faults that cause switch-off are detected in
advance.
Leading technology in many areas
Operating temperatures of up to 60 °C allow secure operation in
the warm aisle.
Metering accuracy of ± 1 % ensures reliable measurement results.
Power losses of approx. 5 W, even in switchable models, reducing
electricity costs and minimizing the thermal load.
178
Industry-leading management properties
An integrated local display and an optional external display
facilitates flexible local management.
Onboard web interface and CLI/SSH interface; suitable for both
Windows and Linux administration.
A variety of authentication options and encrypted protocols
ensure integration into Enterprise Security architectures.
SNMPv3 and IPv6 support so that current requirements,
particularly from the public sector, can be satisfied.
Simple integration into ENP solutions
Can be delivered pre-installed in Knürr racks to save time and
costs during installation in the data center.
Serial integration into Avocent UMG, ACS and MPU guarantees
redundant management access to the MPH2.
Integration into ENP software solutions; the MPH2 is an integral
part of a comprehensive DCIM solution with monitoring and
control functions.
Colored clamps:
Colored labeling of supply.
Special tool-less Knürr DCM rack fixture:
Lowers installation costs and extra space in rack
for cables and other components.
Communications module (RPC2™):
Offers extendable interfaces for network
communication, sensors and local display.
BDM™ local display module
Extended diagnostic functionality;
user-friendly display. Features include detailed
information about alerts and specific labeling
for outputs.
Connection cable with locking mechanism
Prevents IT cables from being accidentally disconnected.
SN sensors:
Consolidates environmental monitoring of temperature,
humidity and potential-free input contacts with the
power supply at rack level.
Integrated display:
Provides easy access to important information
on the rack.
Ultra-flat circuit breakers:
Compact construction; minimizes space
requirements in the rack.
Flexible network cable input:
Simplifies installation in the rack PDU.
Cable and fixed wiring options:
Flexible power distribution; input-cable
can be connected locally.
179
VERTIV™ MPH2™
Vertiv™ MPH2™
– The Vertiv MPH2 is a power distribution unit for IT racks which provides metering
of electrical values. Depending on the model, individual outputs can also be remotecontrolled.
–The integrated RPC2 communications card allows you to connect up to 4 Vertiv MPH2 /
MPX™ units as well as monitor and maintain all connected units remotely. Up to 10
sensors (temperature, air humidity, door contacts as well as potential-free input contacts)
can be connected.
–The Vertiv MPH2 unit has an integrated display. In addition, the optional external
RPCBDM-1000 display module can easily be connected and mounted on the rack.
–Special cables with locking mechanisms can be connected to the outputs.
–Depending on the model, the connecting cable for the MPH2 is attached to the housing
(cable length 3 m), also permitting a connecting cable can be connected on site (model
with connection unit).
Vertiv MPH2™ models
–V
ertiv MPH2™ B – Metering per phase and per group (only models with >16 A input
power).
– Vertiv MPH2™ C – Metering per phase and per group (only models with >16 A input
power). Each output can also be individually switched remotely.
– Vertiv MPH2™ M – Metering per phase and per group (only models with >16 A input
power) and per output.
– Vertiv MPH2™ R – Metering per phase and per group (only models with >16 A input power) and per output. Each output can also be individually switched remotely.
Material / finish / color
– Closed housing, aluminum profile, finely textured powder-coated top (RAL 7021),
Vampamid 6 0024 V0 (UL94) recyclable plastic parts, finely textured and colored (RAL
9005).
Mechanical dimensions
– Vertical models:
Width x Depth x Length (mm): 56 x 50 x (see table).
– Horizontal models:
Width x Depth x Length (mm): 482,6 (440) x 250 x 44.
180
–Remote management: Onboard Web Interface, CLI, SNMPv1,2,3, SSH,
Telnet, integratable into Avocent ACS, UMG & MPU, DSView, Rack Power Manager, Vertiv
Nform & Vertiv Trellis as well as Nagios or other management software programs.
–Authentication: local, remote: active directory, LDAP, TACACS, Radius, Kerberos.
Encryption: MD5, AES, DES.
–Measurement parameters: Current (A), voltage (V), real power (W), apparent power (VA),
consumption (kWh), power factor, frequency and crest factor (only tapes M and R).
Accuracy: ±1 % (V, A).
Certification
– CE label in accordance with:
– Low Voltage Directive 2014/35/EU
– EMC Directive 2014/30/EU
– RoHS Directive 2011/65/EG.
– Bureau-Veritas BG - Certificate (Factory Inspection).
– Bureau-Veritas CB - Certificate.
Scope of delivery
– MPH2™ rack PDU.
– Standard mounting bracket.
– Safety instructions.
– Quickstart guide.
Vertiv™ MPH2™ Types
for Europe
Vertical models
Type
Model/functions
Vertiv MPHR
Vertiv MPHM
Vertiv MPHC
Vertiv MPHB
Input / Group measurement
Output measurement
Output switching
Input Values
Input Connector
Voltage
Current
B
230V
16A
B
230V
16A
B
230V
B
230V
Outputs
Length
Order Number
C13
C19
(mm)
C20 inlet
17
2
916.5
MPHB3241
C20 inlet
21
916.5
MPHB3141
16A
C20 inlet
30
6
1736.5
MPHB1241
16A
IEC 60309 16A 1P+N+G
17
2
916.5
MPHB3242
916.5
MPHB3142
B
230V
16A
IEC 60309 16A 1P+N+G
21
B
230V
16A
IEC 60309 16A 1P+N+G
30
6
1736.5
MPHB1242
B
230V
32A
IEC 60309 32A 1P+N+G
30
6
1736.5
MPHB1243
MPHB1260
B
230V
32A
Connection unit
30
6
1736.5
B
230/400V
3 x 16A
IEC 60309 16A 3P+N+G
30
6
1736.5
MPHB1244
B
230/400V
3 x 32A
IEC 60309 32A 3P+N+G
42
1826.5
MPHB1545
MPHB1345
B
230/400V
3 x 32A
IEC 60309 32A 3P+N+G
18
12
1826.5
B
230/400V
3 x 32A
IEC 60309 32A 3P+N+G
30
6
1826.5
MPHB1245
B
230/400V
3 x 32A
Connection unit
42
1826.5
MPHB1562
MPHB1362
B
230/400V
3 x 32A
Connection unit
18
12
1826.5
B
230/400V
3 x 32A
Connection unit
30
6
1826.5
MPHB1262
C
230V
16A
C20 inlet
8
916.5
MPHC3341
C
230V
16A
C20 inlet
16
1004
MPHC3141
C
230V
16A
C20 inlet
18
C
230V
16A
C20 inlet
24
C
230V
16A
IEC 60309 16A 1P+N+G
18
C
230V
16A
IEC 60309 16A 1P+N+G
24
C
230V
16A
IEC 60309 16A 1P+N+G
16
C
230V
32A
IEC 60309 32A 1P+N+G
18
C
230V
32 A
IEC 60309 32 A 1P+N+G
24
C
230V
32 A
Connection unit
18
C
230V
32 A
Connection unit
24
C
230/400V
3 x 16 A
IEC 60309 16 A 3P+N+G
18
C
230/400V
3 x 16 A
IEC 60309 16 A 3P+N+G
24
C
230/400V
3 x 16 A
Connection unit
18
C
230/400V
3 x 16 A
Connection unit
24
C
230/400V
3 x 32 A
IEC 60309 32 A 3P+N+G
18
C
230/400V
3 x 32 A
IEC 60309 32 A 3P+N+G
24
6
6
6
6
6
6
6
1736.5
MPHC1141
1736.5
MPHC1241
1736.5
MPHC1142
1736.5
MPHC1242
1004
MPHC3142
1736.5
MPHC1143
1736.5
MPHC1243
1736.5
MPHC1160
1736.5
MPHC1260
1736.5
MPHC1144
1736.5
MPHC1244
1736.5
MPHC1161
1736.5
MPHC1261
1736.5
MPHC1145
1736.5
MPHC1245
MPHC1345
C
230/400V
3 x 32 A
IEC 60309 32 A 3P+N+G
6
12
1736.5
C
230/400V
3 x 32 A
Connection unit
18
6
1736.5
MPHC1162
C
230/400V
3 x 32 A
Connection unit
24
1736.5
MPHC1262
C
230/400V
3 x 32 A
Connection unit
6
M
230V
16 A
C20 inlet
8
M
230V
16 A
IEC 60309 16 A 1P+N+G
M
230V
16 A
C20 inlet
M
230V
16 A
C20 inlet
18
M
230V
16 A
C20 inlet
24
1736.5
MPHC1362
916.5
MPHM3341
8
916.5
MPHM3342
16
1004
MPHM3141
M
230V
16 A
IEC 60309 16 A 1P+N+G
18
M
230V
16 A
IEC 60309 16 A 1P+N+G
24
M
230V
16 A
IEC 60309 16 A 1P+N+G
16
M
230V
32 A
IEC 60309 32 A 1P+N+G
18
M
230V
32 A
IEC 60309 32 A 1P+N+G
24
M
230V
32 A
Connection unit
18
M
230V
32 A
Connection unit
24
M
230/400V
3 x 16 A
IEC 60309 16 A 3P+N+G
18
M
230/400V
3 x 16 A
IEC 60309 16 A 3P+N+G
24
M
230/400V
3 x 16 A
Connection unit
18
12
6
6
6
6
6
6
1736.5
MPHM1141
1736.5
MPHM1241
1736.5
MPHM1142
1736.5
MPHM1242
1004
MPHM3142
1736.5
MPHM1143
1736.5
MPHM1243
1736.5
MPHM1160
1736.5
MPHM1260
1736.5
MPHM1144
1736.5
MPHM1244
1736.5
MPHM1161
181
VERTIV™ MPH2™
Type
Input Values
Voltage
Input Connector
Current
Outputs
C13
M
230/400V
3 x 16 A
Connection unit
24
M
230/400V
3 x 32 A
IEC 60309 32 A 3P+N+G
18
Length
C19
1736.5
MPHM1261
6
1736.5
MPHM1145
1736.5
MPHM1245
1736.5
MPHM1345
M
230/400V
3 x 32 A
IEC 60309 32 A 3P+N+G
24
M
230/400V
3 x 32 A
IEC 60309 32 A 3P+N+G
6
12
6
M
230/400V
3 x 32 A
Connection unit
18
M
230/400V
3 x 32 A
Connection unit
24
Order Number
(mm)
MPHM1162
MPHM1262
1736.5
MPHM1362
M
230/400V
3 x 32 A
Connection unit
6
R
230V
16 A
C20 inlet
8
916.5
MPHR3341
R
230V
16 A
IEC 60309 16 A 1P+N+G
8
916.5
MPHR3342
R
230V
16 A
C20 inlet
16
1004
MPHR3141
R
230V
16 A
C20 inlet
18
R
230V
16 A
C20 inlet
24
R
230V
16 A
IEC 60309 16 A 1P+N+G
18
R
230V
16 A
IEC 60309 16 A 1P+N+G
24
R
230V
16 A
IEC 60309 16 A 1P+N+G
16
R
230V
32 A
IEC 60309 32 A 1P+N+G
18
R
230V
32 A
IEC 60309 32 A 1P+N+G
24
R
230V
32 A
Connection unit
18
R
230V
32 A
Connection unit
24
R
230/400V
3 x 16 A
IEC 60309 16 A 3P+N+G
18
R
230/400V
3 x 16 A
IEC 60309 16 A 3P+N+G
24
R
230/400V
3 x 16 A
Connection unit
18
R
230/400V
3 x 16 A
Connection unit
24
R
230/400V
3 x 32 A
IEC 60309 32 A 3P+N+G
18
R
230/400V
3 x 32 A
IEC 60309 32 A 3P+N+G
24
12
1736.5
1736.5
6
6
6
6
6
6
6
1736.5
MPHR1141
1736.5
MPHR1241
1736.5
MPHR1142
1736.5
MPHR1242
1004
MPHR3142
1736.5
MPHR1143
1736.5
MPHR1243
1736.5
MPHR1160
1736.5
MPHR1260
1736.5
MPHR1144
1736.5
MPHR1244
1736.5
MPHR1161
1736.5
MPHR1261
1736.5
MPHR1145
1736.5
MPHR1245
MPHR1345
R
230/400V
3 x 32 A
IEC 60309 32 A 3P+N+G
6
12
1736.5
R
230/400V
3 x 32 A
Connection unit
18
6
1736.5
MPHR1162
R
230/400V
3 x 32 A
Connection unit
24
1736.5
MPHR1262
R
230/400V
3 x 32 A
Connection unit
6
1736.5
MPHR1362
12
Hotizontal models
Type
Input Values
Voltage
Input Connector
Current
Outputs
C13
B
230V
16 A
C20 inlet
12
B
230V
16 A
C20 inlet
8
B
230V
32 A
IEC 60309 32A 1P+N+G
12
B
230V
32 A
IEC 60309 32A 1P+N+G
8
Order Number
C19
MPHB2141
2
MPHB2341
2
MPHB2343
MPHB2143
B
230/400V
3 x 16 A
IEC 60309 16A 3P+N+G
12
B
230/400V
3 x 16 A
IEC 60309 16A 3P+N+G
2
6
MPHB2244
6
MPHB2245
2
MPHM2441
2
MPHM2443
B
230/400V
3 x 32 A
IEC 60309 32A 3P+N+G
2
M
230V
16 A
C20 inlet
9
M
230V
16 A
C20 inlet
6
MPHB2144
MPHM2141
M
230V
32 A
IEC 60309 32A 1P+N+G
9
M
230V
32 A
IEC 60309 32A 1P+N+G
6
M
230/400V
3 x 16 A
IEC 60309 16A 3P+N+G
9
M
230/400V
3 x 16 A
IEC 60309 16A 3P+N+G
2
6
MPHM2344
6
MPHM2345
2
MPHR2441
2
MPHR2443
M
230/400V
3 x 32 A
IEC 60309 32A 3P+N+G
2
R
230V
16 A
C20 inlet
9
R
230V
16 A
C20 inlet
6
MPHM2143
MPHM2144
MPHR2141
R
230V
32 A
IEC 60309 32A 1P+N+G
9
R
230V
32 A
IEC 60309 32A 1P+N+G
6
R
230/400V
3 x 16 A
IEC 60309 16A 3P+N+G
9
R
230/400V
3 x 16 A
IEC 60309 16A 3P+N+G
2
6
MPHR2344
R
230/400V
3 x 32 A
IEC 60309 32A 3P+N+G
2
6
MPHR2345
182
MPHR2143
MPHR2144
Vertiv™ MPX™/Vertiv MPH™/Vertiv MPH2™/IMS™ – Sensors
DOS20153
–These sensors are designed for tool-less
installation in a Knürr Miracle / DCM rack, but is also
compatible with all other rack types.
–"Fixed" type sensors are attached to a cable.
–"Modular" type sensors can be connected to the
delivered cable.
–Plugged into the RPC-1000 or RPC2 communication
card.
–Several sensors can be connected in rows.
–Automatically displayed in the MPX/MPH/MPH2/IMS
software.
–Temperature measurement range: 5 – 55° C.
–Accuracy: ± 0.5° C.
–Humidity measurement range: 10 – 95 %.
–Accuracy: ± 3.5 %.
Note
The sensors are not required for operating the MPX or
MPH, MPH2, IMS. However, a communication card is
needed.
Scope of delivery
– 1 x sensor with connection cable.
– 1 x instruction manual.
Cable length
Type
Model
Order No.
UP
3660
Fixed
Temperature sensor, single
SN-Z01
1 unit
5180
Fixed
Temperature sensor, triple
SN-Z02
1 unit
5180
Fixed
Temperature sensor, triple + humidity sensor, single
SN-Z03
1 unit
2000
Modular
Temperature sensor, single
SN-T
1 unit
2000
Modular
Temperature sensor, single + humidity sensor, single
SN-TH
1 unit
2000
Modular
2 x door contact - input module*
SN-2D
1 unit
2000
Modular
3 x digital input
SN-3C
1 unit
* Suitable door contact switch: Order no.: 06.108.115.9
Liebert RPC BDM - 1000 Display Module
DOS20153
–Provides the local display of the monitored
data for all connected MPX/MPH/MPH2/IMS systems.
–Operated with a navigation switch.
–Connected via a cable with the RPC, enabling the user
to place the displays where needed in the given local
space conditions.
–An individual display can be used for up to
four MPX/MPH/MPH2/IMS PDUs, which are all connected
in a PDU array.
Note
The display module is not required for operating the
MPX or MPH, MPH2, IMS. However, a communication
card is needed.
Scope of delivery
– 1 x RPCBDM-1000 display module.
– 1 x connection cable 2 m.
– 1 x mounting kit.
Order No.
UP
RPCBDM-1000
1 unit
183
VERTIV™ MPH2™
SafetyLock™ Connection Cable IEC C13 EU
DOS20495
– Connection cables have
integrated protection against accidental
disconnection.
–For straight locking from C14 to C13.
–Locking cables are sold in sets of 9 units.
Technical data
– Standard: IEC 60320.
– Load rating: 250 Vac/10 A.
– Operating temperature: -25° C ~ +70° C.
– Extraction force with locking function: up to 120 N.
– Electric power cable: H05VV-F 3G 1.0 mm2.
– Flame retardance: Plug: UL 94V-2 or better; cable:
UL VW-1, IEC60332-1. Cat F2.
Certification
– ENEC.
– VDE.
– CB scheme.
– RoHS compliant.
Color
– Black/white.
– Other colors available upon request.
Scope of delivery
– 9 x locking cables.
How supplied
– In sets.
DOS20496
L
Model
Order No.
UP
0.5 m
Black
03.951.450.0,001
9 unit
1.0 m
Black
03.951.450.0,002
9 unit
1.5 m
Black
03.951.450.0,003
9 unit
0.5 m
White
03.951.451.0,001
9 unit
1.0 m
White
03.951.451.0,002
9 unit
1.5 m
White
03.951.451.0,003
9 unit
DOS20497
SafetyLock Connection Cable IEC C19 EU
– Connection cables have integrated protection against accidental disconnection.
– For straight locking from C20 to C19.
–Locking cables are sold in sets of 6 units.
DOS20498
Technical data
– Standard: IEC 60320.
– Load rating: 250 Vac/16 A.
– Operating temperature: -25° C ~ +70° C.
– Extraction force with locking function: up to 120 N.
– Electric power cable: H05VV-F 3G 1.5 mm2.
– Flame retardance: Plug: UL 94V-2 or better; cable:
UL VW-1, IEC60332-1. Cat F2.
Approvals
– ENEC.
– VDE.
– CB scheme.
– RoHS compliant.
Color
– Black/white.
– Other colors available upon request.
Scope of delivery
– 6 x locking cables.
How supplied
– In sets.
DOS20499
DOS20500
184
L
Model
Order No.
UP
0.5 m
Black
03.951.455.0,001
6 unit
1.0 m
Black
03.951.455.0,002
6 unit
1.5 m
Black
03.951.455.0,003
6 unit
0.5 m
White
03.951.456.0,001
6 unit
1.0 m
White
03.951.456.0,002
6 unit
1.5 m
White
03.951.456.0,003
6 unit
SpeedMountKit Vertiv™ MPH2™, Vertiv MPE
–Installation of the rack PDUs MPH2 and MPE without
tools in Knürr DCM, Miracle 2 and InstaRack.
DSC00236
Rack type
Rack height
Order No.
UP
DCM / Miracle 2
H2000
039514050001
1 unit
DCM / Miracle 2
H2200
039514050003
1 unit
InstaRack
H2000
039514050002
1 unit
InstaRack
H2200
039514050004
1 unit
Design/Color
Order No.
UP
Blue
03.951.476.0.001
20 unit
Red
03.951.476.0.002
20 unit
Yellow
03.951.476.0.003
20 unit
Green
03.951.476.0.004
20 unit
Orange
03.951.476.0.005
20 unit
Vertiv MPH2 / Vertiv MPE – Color Coding
– Option for color coding power supply A or B.
–Option for color coding the individual phases /groups.
– Installation without tools on MPH2 and MPE.
Vertiv MPH2 / Vertiv MPE – Color Coding
185
VERTIV™ MPE
Vertiv™ MPE – Rack PDU
Reliable power distribution for data centers
The Vertiv MPE Rack PDU is a power distribution unit for data center applications. It provides all the necessary functions of a rack-based power distribution unit and guarantees reliable power distribution. A broad range of IT devices and other sensitive electrical loads
can be connected to it.
The MPE offers you the highest level of availability for your
critical loads.
Its high operating temperature of up to 60°C makes it suitable
for installation in hot aisles (area at the back of the rack).
20 A overload switch for many 32 A models that prevents the
overload switch from triggering prematurely at high temperatures
and during start-up peaks.
Output cable with disconnection protection to prevent the
IEC60320 connection cable from being unintentionally
disconnected.
Stable aluminum housing supports the mechanical stability of
the housing.
Extra-large wire cross-sectional area of the input cable; in threephase models, this makes it possible to subject the neutral wire to
greater loads in the event that the loads are unbalanced.
186
Simple physical and electrical installation helps to keep costs
down.
Vertiv supplies the PDUs preinstalled in racks which saves extra
work on-site.
Flexible cable entry facilitates installation in the rack.
Very low unit profile – even in the overload switch area – leaves
maximum installation space for other components as well as more
space for air supply in the rack.
Models with fixed connection facilitate customer-side
connection of the input cable for special requirements.
"SpeedMount" function for installation in Vertiv Knürr DCM /
InstaRack saves time and money in on-site installation.
Great model variety with power supply from up to three-phase
32 A and a number of different outputs – including countryspecific with Schuko plug, UK or Switzerland.
INPUT POWER
16 to 63A (EU).
Single-phase and three-phase.
OUTPUT DISTRIBUTOR
IEC-C13 and IEC-C19, Schuko, UK.
Combination systems.
MODULARITY
Input cable.
187
VERTIV™ MPE™
Vertiv™ MPE – Rack PDU
Vertiv MPE1345
Input values
Voltage
188
Input plug
Current
C19
3
100-240V
16A
C20 inlet
18
16A
C20 inlet
24
230V
16A
IEC 60309 16A 1P+N+G
18
230V
16A
IEC 60309 16A 1P+N+G
24
230V
32A
IEC 60309 32 A 1P+N+G
36
6
32A
IEC 60309 32 A 1P+N+G
24
6
230V
32A
IEC 60309 32 A 1P+N+G
230V
32A
Hardwired
36
6
24
6
32A
Hardwired
32A
Hardwired
230/400V
3 x 16A
IEC 60309 16 A 3P+N+G
36
12
3 x 16A
IEC 60309 16 A 3P+N+G
36
6
230/400V
3 x 16A
IEC 60309 16 A 3P+N+G
230/400V
3 x 16A
Hardwired
36
12
36
6
230/400V
3 x 16A
Hardwired
3 x 16A
Hardwired
230/400V
3 x 32A
IEC 60309 32A 3P+N+G
230/400V
3 x 32A
IEC 60309 32A 3P+N+G
Lengths
Schuko
3
18
230/400V
230/400V
Standards
– CE label in accordance with:
– Low Voltage Directive 2014/35/EU
– RoHS Directive 2011/65/EG
– Bureau-Veritas BG - Certificate (Factory Inspection).
– Bureau-Veritas CB - Certificate.
3
230V
230V
Mechanical dimensions
– Width x depth x length (mm) 56 x 50 x (see table).
Outputs
C13
100-240V
230V
Material / Surface / Color
– Closed housing, aluminum profile, upper section
powder-coated in RAL 7021 fine structure, plastic
parts Vampamid 60024 V0 (UL94) recyclable, dyed
fine structure RAL 9005.
– The MPE Rack PDU is a power distribution
unit for data center applications. It provides all the necessary functions of a rack-based power distribution
unit and guarantees reliable power distribution. A
broad range of IT devices and other sensitive electrical loads can be connected to it.
–Special cables with a locking function can be connected to the outputs.
–Depending on the model, the connecting cable of the
MPH2 is securely attached to the housing (length of
input lead: 3 m) or a connection cable can be connected directly on site (models with connection block).
–The PDU can be installed without any tools in ENP
Knürr racks or other housing systems with the corresponding mountings.
–For 32 A models, the individual groups are protected
by a 20 A circuit breaker (hydraulic, magnetic).
–The maximum operating temperature is 60°C (not for
MPE-3345-002, this type has 6 x 16A miniature circuit
breaker).
Order No.
(mm)
826,5
MPE-3141
826,5
MPE-3241
826,5
MPE-3142
826,5
MPE-3242
1736,5
MPE-1243
1736,5
MPE-1543
1736,5
MPE-1643
1736,5
MPE-1260
3
1736,5
MPE-1560
18
1736,5
MPE-1660
1736,5
MPE-1144
3
1736,5
MPE-1444
18
1736,5
MPE-1644
1736,5
MPE-1161
3
1736,5
MPE-1461
18
1736,5
MPE-1661
6
826,5
MPE-3345-002
36
6
1736,5
MPE-1245
230/400V
3 x 32A
IEC 60309 32A 3P+N+G
24
12
230/400V
3 x 32A
IEC 60309 32A 3P+N+G
24
6
230/400V
3 x 32A
IEC 60309 32A 3P+N+G
230/400V
3 x 32A
IEC 60309 32A 3P+N+G
48
3
18
1736,5
MPE-1345
1736,5
MPE-1545
1736,5
MPE-1645
1736,5
MPE-1745
230/400V
3 x 32A
Hardwired
36
6
1736,5
MPE-1262
230/400V
3 x 32A
Hardwired
24
12
1736,5
MPE-1362
24
6
230/400V
3 x 32A
Hardwired
230/400V
3 x 32A
Hardwired
230/400V
3 x 32A
Hardwired
48
3
1736,5
MPE-1562
18
1736,5
MPE-1662
1736,5
MPE-1762
SafetyLock™ Connection Cable IEC C13 EU
– Connection cables have integrated protection against
accidental disconnection.
–For straight locking from C14 to C13.
–Locking cables are sold in sets of 9 units.
DOS20495
Technical data
– Standard: IEC 60320.
– Load rating: 250 Vac/10 A.
– Operating temperature: -25° C ~ +70° C.
– Extraction force with locking function: up to 120 N.
– Electric power cable: H05VV-F 3G 0.75 mm².
– Flame retardance: Plug: UL 94V-2 or better; cable: UL
VW-1, IEC60332-1. Cat F2.
Certification
– ENEC.
– VDE.
– CB scheme.
– RoHS compliant.
Color
– Black/white.
– Other colors available upon request.
Scope of delivery
– 9 x locking cables.
How supplied
– In sets.
DOS20496
L
Model
Order No.
UP
0.5 m
Black
03.951.450.0,001
9 unit
1.0 m
Black
03.951.450.0,002
9 unit
1.5 m
Black
03.951.450.0,003
9 unit
0.5 m
White
03.951.451.0,001
9 unit
1.0 m
White
03.951.451.0,002
9 unit
1.5 m
White
03.951.451.0,003
9 unit
DOS20497
SafetyLock Connection Cable IEC C19 EU
DOS20498
– Connection cables have
integrated protection against
accidental disconnection.
– For straight locking from C20 to C19.
–Locking cables are sold in sets of 6 units.
Technical data
– Standard: IEC 60320.
– Load rating: 250 Vac/16 A.
– Operating temperature: -25° C ~ +70° C.
– Extraction force with locking function: up to 120 N.
– Electric power cable: H05VV-F 3G 1.5 mm2.
– Flame retardance: Plug: UL 94V-2 or better; cable: UL
VW-1, IEC60332-1. Cat F2.
Approvals
– ENEC.
– VDE.
– CB scheme.
– RoHS compliant.
Color
– Black/white.
– Other colors available upon request.
Scope of delivery
– 6 x locking cables.
How supplied
– In sets.
DOS20499
L
Model
Order No.
UP
0.5 m
Black
03.951.455.0,001
6 unit
1.0 m
Black
03.951.455.0,002
6 unit
1.5 m
Black
03.951.455.0,003
6 unit
0.5 m
White
03.951.456.0,001
6 unit
1.0 m
White
03.951.456.0,002
6 unit
1.5 m
White
03.951.456.0,003
6 unit
DOS20500
189
VERTIV™ KNÜRR® DIS RACK PDU®
Vertiv™ Knürr® DIS Rack PDU® – Basic Rack-PDU
Robust PDUs with useful equipment features
Features
Closed sheet-steel extrusions and ideal
integration into Knürr rack systems
deliver high stability and torsional
strength.
Best possible conductivity: Full-length
brass busbar provided with many
models.
Double spring contacts for reliable and
low contact resistance.
190
The Vertiv™ Knürr® DIS Rack PDU® product family meets a broad range of data center power
distribution requirements for IT applications, computer networking, laboratories and home
sector.
Specially configured for the growing number of electronic components in network switching
racks or server racks. Available with different accessories, such as circuit breakers, overvoltage
protection, mains filter, master-slave function, emergency stop switch, fault-current circuitbreaker, local and remote power metering.
10.3A
1-1
119.5V 4.32kW 5.17kVA
12345
IP
1-1
10.3A
119.5V 4.32kW 5.17kVA
12345
INPUT POWER
Single-phase or three-phase.
Up to 22 kVA.
Simple input supply.
OUTPUT DISTRIBUTOR
NEMA 5-20R single-phase, IEC C13 and C19,
combination systems.
Schuko, France, Switzerland.
10.3
10.3
10.3
MODULARITY
More connectivity with expansion
unit for Basic Rack PDU GST18.
1-1
A
1-1
A
119.5V 4.32kW 5.17kVA
1-1
A
119.5V
1 2 3 4 5 4.32kW 5.17kVA
119.5V
1 2 3 4 5 4.32kW 5.17kVA
12345
10.3
10.3
10.3
1-1
A
1-1
A
119.5V
4.32kW 5.17kVA
1-1
A
119.5V 4.32kW 5.17kVA
12345
119.5V
4.32kW
5.17kVA
12345
12345
FORM FACTOR
Vertical mounting (0 U).
Rack installation.
Workstation mounting.
IP
IP
IP
1-1
IP
A
IP10.3
A
IP10.3
10.3A
LOCAL MONITORING
Fixed display.
1-1
119.5V
4.32kW 5.17kVA
11-1
2 3 4 5 4.32kW 5.17kVA
119.5V
1 2 3 4 5 4.32kW 5.17kVA
119.5V
12345
10.3A
10.3A
10.3A
1-1
1-1
119.5V
4.32kW 5.17kVA
119.5V
11-1
2 3 4 5 4.32kW 5.17kVA
1 2 3 4 5 4.32kW 5.17kVA
119.5V
12345
REMOTE MONITORING
Secure Web and SNMP interfaces
with Vertiv Nform.
OVERLOAD PROTECTION
SCircuit breakers/fuses per branching cable/
output as required.
191
VERTIV™ KNÜRR® DIS RACK PDU®
Benefits
Optimal phase distribution across the
entire rack with color-coded identification of the individual phases.
Up to 48 different plug options per
PDU: shortens the cable distance between the PDU and the consumer.
One of the most compact PDUs on the
market: measures only 44.4 x 45.5 mm,
which saves space even on a 600 mmwide rack.
Simple and quick installation on the
rack extrusion: reduces installation and
wiring costs.
192
Highest possible security and availability with:
Closed sheet-steel extrusions that deliver high stability and
torsional flexibility.
Extensive certification compliant with the international
Standard.
Double spring contacts for reliable and low contact resistance.
Unbalanced load monitoring prevents feed-cable overload of
3-phase feed (only DIS Rack PDU® versions M and RM).
Optimal load monitoring for server installation (only DIS Rack
PDU versions D and I).
Maximum flexibility attained due to:
Internationally compatible configurations and options.
Power cable lengths of 2.5 m or 4 m for more spatial flexibility.
Rotating current indicator in 90° steps (only D and I DIS Rack
PDU versions).
Extremely low operating costs:
Installation
in the rack is rapid and easy requiring minimal
space and reduced installation time.
Automatic background-light reduction reduces the rack PDU
power loss (only with D and I DIS Rack PDU versions).
Especially flat housing extrusion, providing full accessibility to
the 19" level on 600 mm wide server racks.
Reliable power distribution at full power delivered by full-length brass busbars.
A
B
C
Can be fitted to a rack or workstation.
Highly compact construction; minimizes space requirements in the rack.
Color-coded phase allocation (L1, L2, L3).
193
VERTIV™ KNÜRR® DIS RACK PDU®
Vertiv™ Knürr® DIS Rack PDU®
European Equipment Models
VERTIV KNÜRR DIS Rack PDU models
Functions
Input power
Outputs
Euro socket system IEC 320
Basic power distribution
16 A - 32 A / 1 ph
3.68 kVA - 7 kVA
IEC60320
C13 & C19
TriplePower
Basic power distribution
16 A - 32 A / 1 ph and 3 ph
3.68 kVA - 22 kVA
IEC60320
C13 & C19 & Schuko
Classic
Basic power distribution/extra
large distance between the sockets
1 x 16 A 3.68 kVA
Schuko, France, Switzerland
Compact
Basic power distribution
16 A - 32 A / 1 ph
3.68 kVA - 7 kVA
Schuko, France, Switzerland
Protector FI
Fault-current circuit-breaker
FI
1 x 16 A 3.68 kVA
Schuko, France, Switzerland
Protector LS
Circuit breaker (LS)
FI
1 x 16 A 3.68 kVA
Schuko, France, Switzerland
Protector FI/LS
Combination FI + LS
1 x 16 A 3.68 kVA
Schuko, France, Switzerland
Protector Emergency Stop
Emergency stop switch
1 x 16 A 3.68 kVA
Schuko, France, Switzerland
Protector Emergency Stop FI/LS
Combination emergency stop + FI + LS
1 x 16 A 3.68 kVA
Schuko, France, Switzerland
Power Cleaner
Mains filter
1 x 16 A 3.68 kVA
Schuko, France
Safety Basic
Overvoltage protection
1 x 16 A 3.68 kVA
Schuko, France, Switzerland
Safety Standard
Mains filter + overvoltage protection
1 x 16 A 3.68 kVA
Schuko, France, Switzerland
Master Slave
Master Slave
1 x 16 A 3.68 kVA
Schuko, France
Combi
Combination Master Slave +
overvoltage protection + mains filter
1 x 16 A 3.68 kVA
Schuko, France
D
Input measurement, local
16 A - 32 A / 1 ph and 3 ph
3.68 kVA - 22 kVA
IEC60320
C13 & C19 & Schuko
I
Input measurement, local + remote
16 A - 32 A / 1 ph and 3 ph
3.68 kVA - 22 kVA
IEC60320
C13 & C19 & Schuko
194
Vertiv™ Knürr® DIS Rack PDU® Euro Socket System, IEC 320
DOS20062
DOS00458
DOS00460
Models on
page 204
– Optionally with illuminated switch; 2-pole switching.
– 19" installation option.
–Euro socket combinations of IEC 320 C13 and C19
sockets.
– Feed cable:
H05VV-F 3G 1,5 mm2 (16 A types)
H05VV-F 3G 4 mm2 (32 A types).
– Feed cable: 2.5 m / 5 m.
Approvals/certificates
– CE label in accordance with:
– Low Voltage Directive 2014/35/EU
– EMC Directive 2014/30/EU
– RoHS Directive 2011/65/EG.
– Bureau-Veritas BG - Certificate
(Factory Inspection).
– Bureau-Veritas CB - Certificate.
– CSA (only models with IEAC60320 input).
Material / Finish
– Housing: closed sheet steel extrusion, zinc-passivated,
powder-coated texture.
– Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable.
Color
– Enclosure: RAL 7035, light-gray.
–P
lastic parts: RAL 7021 dark-gray.
Abmessungen
– Height: 45.5 mm.
– Width of housing: 44.4 mm (= 1 U).
Scope of delivery
– 1 x socket strip.
– 2 x mounting brackets.
DOS20102
Vertiv Knürr DIS Rack PDU TriplePower® Euro Socket System
DOS20126
– Feed cable:
H05VV-F 5G 2,5 mm2 (3 x 16 A types)
H05VV-F 5G 4 mm2 (3 x 32 A types).
–Feed cable: 2.5 m (optional with IEC60309 plug, 3Ph/N/
PE 6h).
– Easy mounting on the rack extrusion.
– Standard feed 3 x 16 A.
–Ideal for implementing redundancy (e.g. 96 A with
redundant feed).
– Color-coded phase allocation.
– Optimum distribution across the entire
rack height (23 U and 41 U).
– Alternative to 3-phase GST18 system.
Material/ Finish
– Housing: closed sheet steel extrusion, zinc-passivated,
powder-coated texture.
– Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable.
Dimensions
– Height: 45.5 mm.
– Width of housing: 44.4 mm (= 1 U).
Models on
page 204
Approvals/certificates
– CE label in accordance with:
– Low Voltage Directive 2014/35/EU
– EMC Directive 2014/30/EU
– RoHS Directive 2011/65/EG.
– Bureau-Veritas BG - Certificate (Factory Inspection).
– Bureau-Veritas CB Certificate.
Color
– Enclosure: RAL 7035, light-gray.
– Plastic parts: RAL 7021 dark-gray.
Load rating
– 100-240/173-415 Vac.
– Input: 3 x 16 A.
– Output: 10 A (C13).
– Output: 16 A (C19 / Schuko).
Scope of delivery
– 1 x socket strip.
– 2 x mounting brackets.
195
VERTIV™ KNÜRR® DIS RACK PDU®
Vertiv™ Knürr® DIS Rack PDU® Classic
– Optionally with illuminated switch; 2-pole switching.
– Socket rotation: 45°.
– Feed cable: H05VV-F 3G 1.5 mm2.
–Optionally with Euro plug, IEC320 for UPS application.
DOS00403
Material / Finish
– Housing: closed sheet steel extrusion, zinc-passivated,
powder-coated texture.
– Plastic parts: Vampamid 6 0024 VO (UL94).
– Internal conductor: full-length busbars, brass.
Models on
page 204
Color
– RAL 7035, light-gray.
Load rating
– 100-240 Vac/16 A (output Schuko and UTE).
– 100-240 Vac/10A (outputs Switzerland).
Scope of delivery
– 1 x socket strip.
– 2 x mounting brackets.
Dimensions
– Distance between sockets: 100 mm.
– Height: 45.5 mm.
– Width of housing: 44.4 mm (= 1 U).
– Feed cable: 2.5 m.
Approvals/certificates
– CE label in accordance with:
– Low Voltage Directive 2014/35/EU
– EMC Directive 2014/30/EU
– RoHS Directive 2011/65/EG.
– Bureau-Veritas BG – Certificate (Factory Inspection).
– Bureau-Veritas CB – Certificate.
– VDE-GS – Certificate.
Models on
page 205
Vertiv Knürr DIS Rack PDU Compact
DOS00401
with switch.
– Optionally with illuminated switch; 2-pole switching.
– 19" installation option (for length 483 mm).
–2 versions: standard side panel or design side panel.
– Socket rotation: 45°.
– Feed cable: H05VV-F 3G 1.5 mm2.
– Molded right angle plug.
–Optionally with Euro plug, IEC320 for UPS applications.
Material / Finish
– Housing: closed sheet steel extrusion, zinc-passivated,
powder-coated texture.
– Plastic parts: Vampamid 6 0024 VO (UL94), recyclable.
– Internal conductor: full-length busbars, brass.
Dimensions
– Distance between sockets: 50 mm.
– Height: 45.5 mm.
– Width of housing: 44.4 mm (= 1 U).
– Feed cable: 2.5 m.
Approvals/certificates
– CE label in accordance with:
– Low Voltage Directive 2014/35/EU
– EMC Directive 2014/30/EU
– RoHS Directive 2011/65/EG.
– Bureau-Veritas BG – Certificate (Factory Inspection).
– Bureau-Veritas CB – Certificate.
– VDE-GS – Certificate.
196
Color combination
– Final digit of order number .1:
RAL 7035, light-gray.
– Final digit of order number .6:
housing RAL 2003 pastel orange.
– Plastic parts: RAL 7035, light-gray.
Load rating
– 100-240 Vac/16 A (output Schuko and UTE).
– 100-240 Vac/10 A (outputs Switzerland).
Scope of delivery
– 1 x socket strip.
– 2 x mounting brackets.
Vertiv™ Knürr® DIS Rack PDU® Protector FI
DOS20065
with FI circuit breaker
Protector FI
– Fault-current circuit breaker for user protection.
–P
rotection against indirect contact by disconnection
of the circuit when inadmissibly high contact voltage
occurs through bodily contact with electrical equipment.
– Additional protection against direct contact.
– Residual operating current Ig = 10 mA for alternating
and pulsating direct fault currents.
– 19" installation option (for length 483 mm).
– Socket rotation: 45°.
– Feed cable: H05VV-F 3G 1.5 mm2.
–M
olded right angle plug.
Material/ Finish
– Housing: closed sheet steel extrusion, zinc-passivated,
powder-coated texture.
– Plastic parts: Vampamid 6 0024 VO (UL94), recyclable.
– Internal conductor: full-length busbars, brass.
Models on
page 205
– Feed cable: 2.5 m.
Approvals/certificates
– CE label in accordance with:
– Low Voltage Directive 2014/35/EU
– EMC Directive 2014/30/EU
– RoHS Directive 2011/65/EG.
– Bureau-Veritas BG – Certificate (Factory Inspection).
– Bureau-Veritas CB – Certificate.
Color combination
– Final digit of order number .1:
RAL 7035, light-gray.
– Plastic parts: RAL 7035, light gray.
Load rating
– 100–240 Vac/16 A.
Scope of delivery
– 1 x socket strip.
– 2 x mounting brackets.
Dimensions
– Distance between sockets: 50 mm.
–H
eight: 78 mm.
– Width of housing: 44.4 mm (= 1 U).
Vertiv Knürr DIS Rack PDU Protector LS
DOS00692
with circuit breaker.
Protector LS
– Circuit breaker for overload and short circuit.
–P
rotects cables and lines by switching off rapidly in
the event of a short circuit and defined delayed
switch-off when overloads occur.
– Circuit breaker: 16 A.
– Trip characteristics: type B, 2-pole.
– 19" installation option (for length 483 mm).
– Socket rotation: 45°.
– Feed cable: H05VV-F 3G 1.5 mm2.
– Molded right angle plug.
Material/ Finish
– Housing: closed sheet steel extrusion, zinc-passivated,
powder-coated texture.
– Plastic parts: Vampamid 6 0024 VO (UL94), recyclable.
– Internal conductor: full-length busbars, brass.
Dimensions
– Distance between sockets: 50 mm.
– Height: 78 mm.
– Width of housing: 44.4 mm (= 1 U).
– Feed cable: 2.5 m.
Models on
page 205
Approvals/certificates
– CE label in accordance with:
– Low Voltage Directive 2014/35/EU
– EMC Directive 2014/30/EU
– RoHS Directive 2011/65/EG.
– Bureau-Veritas BG – Certificate (Factory Inspection).
– Bureau-Veritas CB – Certificate.
– VDE-GS – Certificate.
Color combination
– Final digit of order number .1:
RAL 7035, light-gray.
– Plastic parts: RAL 7035, light gray.
Load rating
– 100–240 Vac/16 A.
Scope of delivery
– 1 x socket strip.
– 2 x mounting brackets.
197
VERTIV™ KNÜRR® DIS RACK PDU®
Vertiv™ Knürr® DIS Rack PDU® Protector FI / LS
DOS00693
Protector FI / LS
– Fault current switch and circuit breaker.
–P
rovides a combination of user, overload and short
circuit protection.
– Residual operating current Ig = 30 mA for alternating
and pulsating direct fault currents.
– Circuit breaker 16 A (Schuko and France) / 10A
(Switzerland).
– Trip characteristics, type B, 2-pole.
– 19" installation option (for length 483 mm).
– Socket rotation: 45°.
– Feed cable: H05VV-F 3G 1.5 mm2.
– Molded right angle plug.
Material / Finish
– Housing: closed sheet steel extrusion, zinc-passivated,
powder-coated texture.
– Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable.
– Internal conductor: full-length busbars, brass.
Approvals/certificates
– CE label in accordance with:
– Low Voltage Directive 2014/35/EU
– EMC Directive 2014/30/EU
– RoHS Directive 2011/65/EG.
– Bureau-Veritas BG – Certificate (Factory Inspection).
– Bureau-Veritas CB – Certificate.
Color combination
– Final digit of order number .1:
RAL 7035, light-gray.
– Plastic parts: RAL 7035, light-gray.
Load rating
– 100–240 Vac/16 A (Schuko and France).
– 100–240 Vac/10 A (Switzerland).
Scope of delivery
– 1 x socket strip.
– 2 x mounting brackets.
Dimensions
– Distance between sockets: 50 mm.
– Height: 78 mm.
– Width of housing: 44.4 mm (= 1 U).
– Feed cable: 2.5 m.
Vertiv Knürr DIS Rack PDU Protector Emergency Stop
DOS20059
– With 2-pole emergency stop switch for
user protection.
–For manually disconnecting consumers in an
emergency.
–Phase and neutral conductors are separated safely.
–Switch must be intentionally unlocked to restart.
– 19" installation option (for length 483 mm).
– Socket rotation: 45°.
– Feed cable: H05VV-F 3G 1.5 mm2.
– Molded right angle plug.
Material / Finish
– Housing: closed sheet steel extrusion, zinc-passivated,
powder-coated texture.
– Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable.
– Internal conductor: full-length busbars, brass.
198
Models on
page 206
Dimensions
– Distance between sockets: Classic: 100 mm,
Compact: 50 mm.
– Height: 101 mm.
– Width of housing: 44.4 mm (= 1 U).
– Feed cable: 2.5 m.
Models on
page 206
Approvals/certificates
– CE label in accordance with:
– Low Voltage Directive 2014/35/EU
– EMC Directive 2014/30/EU
– RoHS Directive 2011/65/EG.
– Bureau-Veritas BG – Certificate (Factory Inspection).
– Bureau-Veritas CB – Certificate.
Color combinations
– Final digit of order number .1:
RAL 7035, light gray.
– Plastic parts: RAL 7035, light gray.
Load rating
– 100–240 Vac/16 A.
Scope of delivery
– 1 x socket strip.
– 2 x mounting brackets.
Models on
Vertiv™ Knürr® DIS Rack PDU® Protector Emergency Stop FI /LSpage 206
DOS00456
– With 2-pole emergency stop switch
for user protection.
– For protecting operating personnel.
–For manually disconnecting consumers in an
emergency.
–Phase and neutral conductors are separated safely.
–Switch must be intentionally unlocked to restart.
–Socket rotation: 45°.
–Feed cable: H05VV-F 3G 1.5 mm2.
–Molded right angle plug.
Material/ Finish
– Housing: closed sheet steel extrusion, zinc-passivated,
powder-coated texture.
– plastic parts: Vampamid 6 0024 VO (UL94),
recyclable.
– Internal conductor: full-length busbars, brass.
Dimensions
– Distance between sockets: Compact: 50 mm.
– Height: 101 mm.
– Width of housing: 44.4 mm (= 1 U)
– Feed cable: 2.5 m.
Approvals/certificates
– CE label in accordance with:
– Low Voltage Directive 2014/35/EU
– EMC Directive 2014/30/EU
– RoHS Directive 2011/65/EG.
– Bureau-Veritas BG – Certificate (Factory Inspection).
– Bureau-Veritas CB – Certificate.
Color combinations
– Final digit of order number .1:
RAL 7035, light-gray.
– Plastic parts: RAL 7035, light-gray.
Additionally:
– With 2-pole fault-current switch and circuit breaker
–P
rovides a combination of user, overload and short
circuit protection.
Load rating
– 100–240 Vac/16 A.
Scope of delivery
– 1 x socket strip.
– 2 x mounting brackets.
Vertiv Knürr DIS Rack PDU Power Cleaner
DOS20061
–High-frequency glitches generally occur
in switching processes ranging from 100 kHz to 5 MHz.
This high-frequency rate overloads the mains frequency
and affects adjacent electronic equipment. The mains
filter attenuates this high-frequency rate.
–The attenuation behavior is harmonized with the typical
interference spectrum.
–The mains filter works in both directions: where glitches
from the equipment to the socket strip are also filtered
from the mains.
–19" installation option (for length 483 mm).
–Socket rotation: 45°.
–Feed cable: H05VV-F 3G 1.5 mm2.
–Molded right angle plug.
Material / Finish
– Housing: closed sheet steel extrusion, zinc-passivated,
powder-coated texture.
– Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable.
– Internal conductor: full-length busbars, brass.
Dimensions
– Distance between sockets: 50 mm.
– Height: 45.5 mm.
– Width of housing: 44.4 mm (= 1 U).
– Feed cable: 2.5 m.
Models on
page 206
Approvals/certificates
– CE label in accordance with:
– Low Voltage Directive 2014/35/EU
– EMC Directive 2014/30/EU
– RoHS Directive 2011/65/EG.
– Bureau-Veritas BG – Certificate (Factory Inspection).
– Bureau-Veritas CB – Certificate.
Color combination
– Final digit of order number .1:
RAL 7035, light-gray.
– Final digit of order number .6:
housing RAL 2003 pastel orange.
– Plastic parts: RAL 7035, light-gray.
Technical data
– Nominal voltage: max. 250 Vac, 50 Hz.
– Nominal current, max. 16 A.
– Filter compliant with VDE 0565-3 (EN 60939-1).
Scope of delivery
– 1 x socket strip.
– 2 x mounting brackets.
– 2 x 19" mounting brackets (additionally with 19"
installation option).
199
VERTIV™ KNÜRR® DIS RACK PDU®
Vertiv™ Knürr® DIS Rack PDU® Safety Basic
DOS20068
with overvoltage protection
–For protection against transient overvoltage
from the mains, which, for example, are caused by
switching machines on and off.
–When critical overvoltages occur, the connection to
the mains is cut off.
–Once the protective conductor has been triggered, the
green function display light is not illuminated. Thus,
the socket strip can no longer be used.*
–Basic equipment protection is classified as class 3
(category D).
–For optimal protection, class 1 and 2 (categories B and
C) protective equipment must be installed in the
building.
–19" installation option (for length 483 mm).
–Socket rotation: 45°.
–Feed cable: H05VV-F 3G 1.5 mm2.
–Molded right angle plug.
Material / Finish
– Housing: closed sheet steel extrusion, zincpassivated, powder-coated texture.
– plastic parts: Vampamid 6 0024 VO (UL94),
recyclable.
– Internal conductor: full-length busbars, brass.
Dimensions
– Distance between sockets: 50 mm.
–H
eight: 45.5 mm.
– Width of housing: 44.4 mm (= 1 U).
Approvals/certificates
– CE label in accordance with:
– Low Voltage Directive 2014/35/EU
– EMC Directive 2014/30/EU
– RoHS Directive 2011/65/EG.
– Bureau-Veritas BG – Certificate (Factory Inspection).
– Bureau-Veritas CB – Certificate.
Color combination
– Final digit of order number .1:
RAL 7035, light-gray.
– Final digit of order number .6:
housing RAL 2003 pastel orange.
– Plastic parts: RAL 7035, light-gray.
Technical data
– Appliance class: Type 3 as per DIN EN 61643-11.
– Requirement class: category D as per VDE 0675-6.
– Mains voltage: 230 VAC.
– Nominal current, max. 16 A.
–D
ischarge surge current (8/20 μs): 10 kA.
–R
eaction time: ‹ 25 ns.
– Safety level (at 100 A varistor peak current): L with
respect to N: ‹ 800 V, L / N with respect to PE: ‹ 1500V.
Scope of delivery
– 1 x socket strip.
– 2 x mounting brackets.
* Send the socket strip to the manufacturer for the safety arrester to be replaced!
200
Models on
page 206
Vertiv™ Knürr® DIS Rack PDU® Safety Standard
DOS20069
– Standard safety models consist of a combined
overvoltage protection/mains filter element.
–Protects against transient overvoltages from the
mains, which, for example, are caused by switching
machines on and off.
–When critical overvoltages occur, connection to the
mains is cut off.
–Once the protective conductor has been triggered, the
green function display light is not illuminated. The
socket strip can thus no longer be used.*
–Basic equipment protection is classified as class 3
(category D).
–For optimal protection, class 1 and 2 (categories B and
C) protective equipment must be
installed in the building.
–High-frequency glitches are generally caused by
switching processes in an operation from 100 kHz
to 5MHz.
–This high-frequency rate overloads the mains
frequency and affects adjacent electronic equipment.
The mains filter attenuates this high-frequency rate.
–The attenuation behavior is harmonized with the
typical interference spectrum.
–19" installation option (for length 483 mm).
–Socket rotation: 45°.
–Feed cable: HO5VV-F 3G 1.5 mm2.
–Molded right angle plug.
Material/ Finish
– Housing: closed sheet steel extrusion, zincpassivated, powder-coated texture.
– Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable.
– Internal conductor: full-length busbars, brass.
Models on
page 206
Approvals/certificates
– CE label in accordance with:
– Low Voltage Directive 2014/35/EU
– EMC Directive 2014/30/EU
– RoHS Directive 2011/65/EG.
– Bureau-Veritas BG – Certificate (Factory Inspection).
– Bureau-Veritas CB – Certificate.
Color combination
– Final digit of order number .1:
RAL 7035, light-gray.
– Final digit of order number .6:
housing RAL 2003 pastel orange.
– Plastic parts: RAL 7035, light-gray.
Technical data
– Mains voltage: 230 VAC.
– Nominal current: max. 16 A / 10 A.
– Discharge surge current (8/20 μs): 10 kA.
– Reaction time: ‹ 25 ns.
– S afety level (at100 A varistor peak current): L with
respect to N: ‹ 800 V, L / N with respect to PE: ‹ 1500V.
–O
vervoltage protection
– Appliance class: Class 3 – as per DIN EN 61643-11.
– Requirement class: Category D as per VDE 0675-6.
– Mains filter: as per VDE 0565 (EN 60939).
Scope of delivery
– 1 x socket strip.
– 2 x mounting brackets.
Dimensions
– Distance between sockets: 50 mm.
– Height: 45.5 mm.
– Width of housing: 44.4 mm (= 1 U).
– Feed cable: 2.5 m.
* Send the socket strip to the manufacturer for the safety arrester to be replaced!
201
VERTIV™ KNÜRR® DIS RACK PDU®
Vertiv™ Knürr® DIS Rack PDU® Master-Slave
DOS20070
–Slave plugs will switch on if master switches on.
–Note:
– The master consumer's power intake must always exceed the switch-on threshold. When switching off the
master consumer, the power intake must fall below the
switch-off threshold.
– 19" installation option (for length 483 mm).
– Socket rotation: 45°.
– Feed cable: H05VV-F 3G 1.5 mm2.
– Molded right angle plug.
Material / Finish
– Housing: closed sheet steel extrusion, zinc-passivated,
powder-coated texture.
– Plastic parts: Vampamid 6 0024 VO (UL94), recyclable.
– Internal conductor: full-length busbars, brass.
Models on
page 206
Color combination
– Final digit of order number .1:
RAL 7035, light-gray.
– Plastic parts: RAL 7035, light-gray.
Load rating
– Max. 250 Vac/16 A.
Technical data
– Switching-threshold setting range
– On: 20 - 200 mA (approx. 55 mA on delivery).
– Off: 16 - 160 mA (approx. 44 mA on delivery).
– Switching delay: 550 ms, ± 20 %.
– Electronic module: 2-pole switching.
Scope of delivery
– 1 x socket strip.
– 2 x mounting brackets.
Dimensions
– Distance between sockets: 50 mm.
– Height: 45.5 mm.
– Width of housing: 44.4 mm (= 1 U).
– Feed cable: 2.5 m.
Approvals/certificates
– CE label in accordance with:
– Low Voltage Directive 2014/35/EU
– EMC Directive 2014/30/EU
– RoHS Directive 2011/65/EG.
– Bureau-Veritas BG – Certificate (Factory Inspection).
– Bureau-Veritas CB – Certificate.
– VDE GS - Certificate.
Models on
page 206
Vertiv Knürr DIS Rack PDU Combi
DOS00325
with master-slave overvoltage protection and mains filter.
–Master-slave with overvoltage protection and
mains filter.
– Automatic consumer switching.
–Combines Master-Slave and Safety Standard functions.
– Socket rotation: 45°.
– Feed cable: H05VV-F 3G 1.5 mm2.
– Molded right angle plug.
Material / Finish
– Housing: closed sheet steel extrusion, zinc-passivated,
powder-coated texture.
– Plastic parts: Vampamid 6 0024 VO (UL94), recyclable.
– Internal conductor: full-length busbars, brass.
Dimensions
– Distance between sockets: 50 mm.
– Height: 45.5 mm.
– Width of housing: 44.4 mm (= 1 U).
– Feed cable: 2.5 m.
Approvals/certificates
– CE label in accordance with:
– Low Voltage Directive 2014/35/EU
– EMC Directive 2014/30/EU
– RoHS Directive 2011/65/EG.
– Bureau-Veritas BG – Certificate (Factory Inspection).
– Bureau-Veritas CB – Certificate.
202
Color combination
– Final digit of order number .1:
RAL 7035, light-gray.
– Plastic parts: RAL 7035, light-gray.
Technical data
– With overvoltage protection and mains filter.
– Mains voltage: max. 250 VAC.
– Nominal current: 16 A.
– Requirement class: D (protection as per VDE 0675).
– S urge current resistance (8/20 s wave): Max. 10 kA.
–P
rotection level (1.5/50 μs wave): ‹ 1500 V (L + N
against PE).
– Master-slave function:
– Switching-threshold setting range
– On: 20 - 200 mA (approx. 55 mA on delivery).
– Off: 16 - 160 mA (approx. 44 mA on delivery).
– Switching delay: 550 ms ± 20 %.
– Electronic module: 2-pole switching.
Scope of delivery
– 1 x socket strip.
– 2 x mounting brackets.
Models on
page 207
Vertiv™ Knürr® DIS Rack PDU® D
DOS80002b
– Metering electrical values per phase.
– Metering values are clearly displayed on a LCD display.
– LCD display rotation in 90° steps.
– Display contrast can be adjusted.
– Unbalanced-load warning display with 3-phase model.
– Three color LED shows status of PDU.
– Automatic reduction of background light.
– Metering values: Voltage, phase and neutral current, frequency, real power apparent power, energy, power factor.
– Input cable:
H05VV -F 5 G 4 mm2 (3 x 32 A types)
H05VV -F 3 G 4 mm2 (1 x 32 A types)
H05VV -F 5G 2,5 mm2 (3 x 16 A types)
H05VV -F 3G 1,5 mm2 (1 x 16 A types)
Length: 2,5 m (16 A types); 3 m (32 A types).
Approvals/certificates
– CE label in accordance with:
– Low voltage directive 2014/35/EU
– EMC-directive 2014/30/EU
– RoHS-directive 2011/65/EG.
– Bureau-Veritas BG – Certificate (Factory Inspection).
– Bureau-Veritas CB – Certificate.
Color
– Housing: RAL 7035 light gray.
– lastic parts: RAL 7021 dark-gray.
Scope of delivery
– 1 socket strip.
– 2 mounting brackets.
Material/ Finish
– Housing: closed sheet steel extrusion, zinc-passivated,
powder-coated texture.
– Plastic parts: Vampamid 6 0024 VO (UL94), recyclable.
Models on
page 207
Vertiv Knürr DIS Rack PDU I
DOS80002
– Metering electrical values per phase.
– Metering values are clearly displayed on a LCD display.
– LCD display rotation in 90° steps.
– Display contrast can be adjusted.
– Unbalanced-load warning display with 3-phase model.
– Remote interface to get metering values and alarm.s
– Automatic reduction of background light.
– Metering values: Voltage, phase and neutral current, frequency, real power apparent power, energy, power factor.
– Input cable:
H05VV -F 5 G 4 mm2 (3 x 32 A types)
H05VV -F 3 G 4 mm2 (1 x 32 A types)
H05VV -F 5G 2,5 mm2 (3 x 16 A types)
H05VV -F 3G 1,5 mm2 (1 x 16 A types)
Length: 2,5 m (16 A types); 3 m (32 A types).
Approvals/certificates
– CE label in accordance with:
– Low voltage directive 2014/35/EU
– EMC-directive 2014/30/EU
– RoHS-directive 2011/65/EG.
– Bureau-Veritas BG – Certificate (Factory Inspection).
– Bureau-Veritas CB – Certificate.
Color
– Housing: RAL 7035 light gray.
– Plastic parts: RAL 7021 dark-gray.
Scope of delivery
– 1 socket strip.
– 2 mounting brackets.
Data interface:
– RJ45 LAN-Port (10/100) for connection to network
(LAN).
– Remote Management: Onboard Web Interface, http/s,
CLI, SNMPv1,2,3, SSH, Syslog, IPv4, IPv6, DNS.
Material / Finish
– Housing: closed sheet steel extrusion, zinc-passivated,
powder-coated texture.
– Plastic parts: Vampamid 6 0024 VO (UL94), recyclable.
203
VERTIV™ KNÜRR® DIS RACK PDU®
VERTIV KNÜRR
DIS Rack PDU
Model
Input Values
Voltage
Input Connector
Current
Outputs
C13
Euro plug IEC320 system
230V
230V
230V
With feed cable
230V
16 A
16 A
10 A
16 A
Schuko CEE7/7
Schuko CEE7/7
IEC60320 C13
IEC60320 C19
6
9
12
15
230V
16 A
IEC60309 1ph/N/PE 6h
15
230V
230V
230V
230V
230V
230V
10 A
10 A
10 A
10 A
10 A
10 A
IEC60320 C14 inlet
IEC60320 C14 inlet
IEC60320 C14 inlet
IEC60320 C14 inlet
IEC60320 C14 inlet
IEC60320 C14 inlet
6
9
6
9
6
9
With overload
protection 10 A
230V
10 A
Schuko CEE7/7
GST18 input in
side panel
230V
16 A
230/400V
230/400V
230/400V
230/400V
230/400V
Euro input
in plug panel
Euro input on
side panel
C19
Schuko
UTE
L
S
F1
F2
19" Safe
Order No.
Type 13 Type 23
03.600.006.1
03.602.009.1
03.600.312.1
3
333
483
483
783
3
783
383
483
333
433
383
483
03.600.518.1
03.622.006.1
03.622.009.1
03.622.706.1
03.622.709.1
03.624.706.1
03.624.709.1
10
483
03.632.010.1
GST18
6
383
03.600.206.1
3 x 16 A
3 x 16 A
3 x 16 A
3 x 16 A
3 x 16 A
none
none
IEC60309 3ph/N/PE 6h
IEC60309 3ph/N/PE 6h
IEC60309 3ph/N/PE 6h
24
48
24
48
18
1033
1833
1033
1833
1133
230/400V
230/400V
230/400V
230/400V
230/400V
3 x 16 A
3 x 16 A
3 x 16 A
3 x 16 A
3 x 16 A
IEC60309 3ph/N/PE 6h
IEC60309 3ph/N/PE 6h
IEC60309 3ph/N/PE 6h
IEC60309 3ph/N/PE 6h
IEC60309 3ph/N/PE 6h
36
6
6
18
18
3
03.600.024.1
03.600.048.1
03.600.824.1
03.600.848.1
03.600.524.1
03.600.542.1
03.600.506.1
03.300.812.1
03.600.521.1
230/400V
3 x 16 A
IEC60309 3ph/N/PE 6h
21
230/400V
230/400V
230/400V
230/400V
3 x 16 A
3 x 16 A
3 x 16 A
3 x 16 A
IEC60309 3ph/N/PE 6h
IEC60309 3ph/N/PE 6h
IEC60309 3ph/N/PE 6h
IEC60309 3ph/N/PE 6h
45
36
230V
230V
230V
230V
230V
230V
230V
230V
230V
230V
230V
230V
230V
230V
230V
230V
230V
16 A
16 A
16 A
16 A
16 A
16 A
16 A
16 A
16 A
16 A
16 A
16 A
10 A
10 A
10 A
10 A
10 A
Schuko CEE7/7
Schuko CEE7/7
Schuko CEE7/7
Schuko CEE7/7
Schuko CEE7/7
Schuko CEE7/7
Schuko CEE7/7
Schuko CEE7/7
Schuko CEE7/7
Schuko CEE7/7
Schuko CEE7/7
Schuko CEE7/7
SEV 1011 T12
SEV 1011 T12
SEV 1011 T12
SEV 1011 T12
SEV 1011 T12
03.600.418.1
TriplePower
6
1733
483
833
833
833
12
3
833
6
6
6
03.300.521.1
1733
1733
483
483
03.600.821.1
03.600.845.1
03.300.542.1
03.300.506.1
03.600.806.1
1783
1383
983
583
1733
1333
933
533
1383
983
583
933
1383
983
583
1733
933
03.300.067.X
03.300.063.X
03.300.059.X
03.300.055.X
03.302.066.X
03.302.062.X
03.302.058.X
03.302.054.X
03.400.063.X
03.400.059.X
03.400.055.X
03.402.058.X
03.701.063.1
03.701.059.1
03.701.055.1
03.703.066.1
03.703.058.1
Classic
204
17
13
9
5
16
12
8
4
13
9
5
8
13
9
5
16
8
VERTIV KNÜRR
DIS Rack PDU
Model
Input Values
Input Connector
Outputs
Voltage
Current
C13
C19
Schuko
230V
230V
230V
230V
230V
230V
230V
230V
230V
230V
230V
230V
230V
230V
230V
230V
230V
230V
230V
230V
230V
230V
230V
230V
230V
230V
230V
230V
230V
230V
230V
230V
230V
230V
230V
230V
230V
230V
230V
16 A
16 A
16 A
16 A
16 A
16 A
16 A
16 A
16 A
16 A
16 A
16 A
16 A
16 A
16 A
16 A
16 A
10 A
16 A
16 A
16 A
16 A
16 A
16 A
16 A
16 A
16 A
16 A
16 A
16 A
16 A
16 A
10 A
10 A
10 A
10 A
10 A
10 A
10 A
Schuko CEE7/7
Schuko CEE7/7
Schuko CEE7/7
Schuko CEE7/7
Schuko CEE7/7
Schuko CEE7/7
Schuko CEE7/7
Schuko CEE7/7
Schuko CEE7/7
Schuko CEE7/7
Schuko CEE7/7
Schuko CEE7/7
Schuko CEE7/7
Schuko CEE7/7
Schuko CEE7/7
Schuko CEE7/7
Schuko CEE7/7
IEC60320 Sheet E
IEC60320 Sheet I
GST18
GST18
GST18
GST18
Schuko CEE7/7
Schuko CEE7/7
Schuko CEE7/7
Schuko CEE7/7
Schuko CEE7/7
Schuko CEE7/7
Schuko CEE7/7
GST18
GST18
SEV 1011 T12
SEV 1011 T12
SEV 1011 T12
SEV 1011 T12
SEV 1011 T12
SEV 1011 T12
SEV 1011 T12
15
11
11
7
7
8
4
4
14
10
10
6
6
6
7
3
3
8
8
6
3
7
4
230V
230V
230V
230V
16 A
16 A
16 A
16 A
Schuko CEE7/7
Schuko CEE7/7
Schuko CEE7/7
Schuko CEE7/7
13
9
5
230V
230V
230V
230V
16 A
16 A
16 A
16 A
Schuko CEE7/7
Schuko CEE7/7
Schuko CEE7/7
Schuko CEE7/7
13
9
5
L
UTE
S
F1
F2
19" Safe
Order No.
Type 13 Type 23
Compact
UPS application
883
732
683
532
483
483
382
333
883
732
683
532
532
483
483
382
333
483
483
583
433
533
383
683
532
483
333
683
483
333
533
383
683
483
333
732
483
382
333
03.300.015.X
03.300.111.X
03.300.011.X
03.300.107.X
03.300.007.X
03.300.008.1
03.300.104.X
03.300.004.X
03.302.014.X
03.302.110.X
03.302.010.X
03.303.106.X
03.302.106.X
03.302.006.X
03.302.007.1
03.302.103.X
03.302.003.X
03.300.308.1
03.300.408.1
03.302.206.1
03.302.203.1
03.300.207.1
03.300.204.1
03.400.011.X
03.400.107.X
03.400.007.X
03.400.004.X
03.402.010.X
03.402.006.X
03.402.003.X
03.400.207.1
03.400.204.1
03.701.011.1
03.701.007.1
03.701.004.1
03.703.110.1
03.703.006.1
03.703.103.1
03.703.003.1
5
883
683
483
483
03.304.013.1
03.304.009.1
03.304.005.1
03.404.005.1
5
883
683
483
483
03.308.013.1
03.308.009.1
03.308.005.1
03.408.005.1
11
7
7
4
10
6
3
7
4
11
7
4
10
6
3
3
Protector FI
Protector LS
205
VERTIV™ KNÜRR® DIS RACK PDU®
VERTIV KNÜRR
DIS Rack PDU
Model
Input Values
Voltage
Input Connector
Current
Outputs
C13
C19
Schuko
UTE
L
S
F1
F2
19" Safe
Order No.
Type 13 Type 23
Protector FI/LS
230V
16 A
230V
16 A
230V
16 A
230V
16 A
230V
16 A
230V
10 A
Protector emergency stop switch
230V
16 A
Compact
230V
16 A
Protector emergency stop switch FI/LS
230V
16 A
Power Cleaner
230V
16 A
230V
16 A
230V
16 A
230V
16 A
Safety Basic
230V
16 A
230V
16 A
883
683
483
683
483
483
03.310.013.1
03.310.009.1
03.310.005.1
03.410.009.1
03.410.005.1
03.711.005.1
483
683
03.326.006.1
03.426.010.1
8
683
03.328.008.1
13
9
5
883
683
483
483
03.312.013.X
03.312.009.X
03.312.005.X
03.612.206.1
Schuko CEE7/7
Schuko CEE7/7
10
10
732
683
6
4
4
483
383
433
483
483
03.316.110.1
03.316.010.X
03.316.006.X
03.316.004.1
03.316.204.1
03.616.206.1
03.416.006.1
883
732
683
532
483
483
483
483
03.318.013.X
03.318.109.X
03.318.009.X
03.318.105.X
03.318.005.X
03.618.206.1
03.418.005.X
03.719.005.1
683
483
483
03.314.009.1
03.314.005.1
03.414.005.1
733
533
03.320.009.1
03.320.005.1
Schuko CEE7/7
Schuko CEE7/7
Schuko CEE7/7
Schuko CEE7/7
Schuko CEE7/7
SEV 1011 T12
13
9
5
Schuko CEE7/7
Schuko CEE7/7
6
Schuko CEE7/7
Schuko CEE7/7
Schuko CEE7/7
Schuko CEE7/7
GST18
9
5
5
10
6
230V
230V
230V
230V
230V
16 A
16 A
16 A
16 A
16 A
Schuko CEE7/7
Schuko CEE7/7
GST18
GST18
Schuko CEE7/7
230V
230V
230V
230V
230V
230V
230V
230V
16 A
16 A
16 A
16 A
16 A
16 A
16 A
10 A
Schuko CEE7/7
Schuko CEE7/7
Schuko CEE7/7
Schuko CEE7/7
Schuko CEE7/7
GST18
Schuko CEE7/7
SEV 1011 T12
230V
230V
230V
16 A
16 A
16 A
Schuko CEE7/7
Schuko CEE7/7
Schuko CEE7/7
9
5
230V
230V
16 A
16 A
Schuko CEE7/7
Schuko CEE7/7
9
5
6
6
Safety Standard
13
9
9
5
5
6
5
5
Master-Slave
5
Combi
206
VERTIV KNÜRR
DIS Rack PDU
Model
Input Values
Voltage
Input Connector
Current
Outputs
C13
C19
Schuko
UTE
L
S
F1
F2
19" Safe
Order No.
Type 13 Type 23
D
230V
16 A
Schuko CEE7/7
6
483
230V
230V
230V
230V
230V
230V
230V
230V
230V
230/400V
230/400V
230/400V
230/400V
16 A
16 A
16 A
16 A
16 A
16 A
10 A
16 A
16 A
3 x 16 A
3 x 16 A
3 x 16 A
3 x 16 A
IEC60309 1ph/N/PE 6h
Schuko CEE7/7
IEC60309 1ph/N/PE 6h
Schuko CEE7/7
IEC60309 1ph/N/PE 6h
Schuko CEE7/7
SEV 1011 T12
SEV 1011 T23
IEC60309 1ph/N/PE 6h
IEC60309 3ph/N/PE 6h
IEC60309 3ph/N/PE 6h
IEC60309 3ph/N/PE 6h
IEC60309 3ph/N/PE 6h
6
14
14
483
933
933
483
483
483
483
483
933
1283
683
1433
483
03.306.005.1
03.306.805.1
03.306.014.1
03.306.814.1
03.606.008.1
03.606.808.1
03.406.006.1
03.706.005.1
03.706.006.1
03.606.820.1
03.306.518.1
03.306.506.1
03.606.533.1
03.606.533.1
230V
230V
230V
230V
230V
230/400V
230/400V
230/400V
230/400V
16 A
16 A
16 A
16 A
16 A
3 x 16 A
3 x 16 A
3 x 16 A
3 x 16 A
IEC60309 1ph/N/PE 6h
Schuko CEE7/7
IEC60309 1ph/N/PE 6h
Schuko CEE7/7
IEC60309 1ph/N/PE 6h
IEC60309 3ph/N/PE 6h
IEC60309 3ph/N/PE 6h
IEC60309 3ph/N/PE 6h
IEC60309 3ph/N/PE 6h
1033
633
633
933
933
1383
783
1533
633
03.607.820.1
03.307.006.1
03.307.806.1
03.307.012.1
03.307.812.1
03.307.518.1
03.307.506.1
03.607.533.1
03.607.506.1
9
9
6
5
6
18
2
18
6
27
6
6
18
2
I
6
6
12
12
18
6
27
6
6
Outputs:
C13
= IEC60320 C13
C19
= IEC60320 C19
Schuko = Protective contact plug DIN 49440
UTE
= France Standard CEE 7-V
Type 13 = Switzerland, type 13
F2
= Design side panel (for installing at workstation)
L
= Length in mm
19"
= Suitable for 19" installation
S
= Switch
safe
= Child-proof
F1
= Standard side pane (for rack mounting)
207
VERTIV™ KNÜRR® DIS RACK PDU®
3-Phase in Rack with GST18
Features
Requirement
Constant energy increase requirements in
the rack caused by high packing densities
(e.g. 1 U Pizza servers, blade servers, etc.) (1)
Solution
3-phase distributor with GST18 plug system,
e.g. 96 A with redundant feed. (2)
1. DOS20147
2. DOS20132
3. DOS20142
3. DOS20135
Benefits (3, 4)
– Modularity.
– Plug-in capability (no wiring required).
– Can be expanded.
– Cascadable.
– Easy implementation of redundancies/
UPS-secured circuits.
– Combination of DIN Schuko / IEC320 Euro
systems.
– Any installation position can be selected.
– Good alternative to 3-phase Vertiv™
Knürr® DIS Rack PDU Triple Power.
Power Supply Cable, 3-Phase
Accessories for GST 18 Plug System
Color
– Black.
–GST 18 socket for connecting GST18i5
distributor block with 3 phases.
– 5-pole (L1, L2, L3, N, PE) 250/400 V ~.
– Cable: H05VV-F 5G 2.5 mm2.
DOS20104
L
2000
Order No.
UP
04.000.048.0 1 unit
GST18i5 Distributor Block, 3-Phase
– For individual connection at the customer.
– Modular plug-in connection.
–3-phase distribution on various socket strips.
– Including mounting panel.
DOS20103
208
Color
– Black.
Order No.
UP
04.000.038.9 1 unit
Power Supply Cable, Single Phase
Accessories for GST 18 Plug System
– Mains plug CEE/VII: GST18 socket (Wieland).
– Cable: H05VV-F3G 1.5 mm2.
Color
– White.
L
2000
5000
Order No.
UP
04.000.040.0 1 unit
04.000.041.0 1 unit
DOS00467
Connection Cable
Accessories for GST 18 Plug System
– GST 18 plug.
– GST 18 socket.
– Cable: H05VV-F3G 1.5 mm2.
DOS00469
L
200
200
500
500
1000
1000
5000
Color
– For color coding circuits (e.g. UPS).
Model
White
Black
White
Black
White
Black
White
Order No.
04.000.042.0
04.000.042.9
04.000.037.0
04.000.037.9
04.000.044.0
04.000.044.9
04.000.045.0
UP
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit
DOS20105
GST18 Socket
– With threaded connection for cross-section
1.5 – 2.5 mm2 with cable strain relief.
– For individual connection.
Color
– White.
Order No.
UP
04.000.046.0 1 unit
DOS00471
GST18 Plug
– With threaded connection for cross-section
1.5 – 2.5 mm2 with cable strain relief.
–For individual, further cabling.
Color
– White.
Order No.
UP
04.000.047.0 1 unit
DOS00470
209
VERTIV™ KNÜRR® DIS RACK PDU®
Mains Cable for Euro Socket Strip
For DIN 49 440 and French/Belgian Standard
– Mains plug CEE/VII: Euro socket IEC 320.
– Cable: H05VV-F 3G 1 mm2.
DOS00076
Mains voltage
– 250 VAC.
Nominal current
– 10 A.
L
2000
6000
Order No.
UP
04.000.054.9 1 unit
04.000.053.9 1 unit
Mains Cable for Euro Socket Strip
For Swiss Standard
– Mains plug: Type 12 - Euro socket IEC 320.
– Cable: H05VV-F 3G 1 mm2.
Mains voltage
– 250 VAC.
Nominal current
– 10 A.
L
2000
Order No.
UP
04.000.055.9 1 unit
Mains Cable for Euro Socket Strip
For British Standard
Mains voltage
– 250 VAC.
Nominal current
– 10 A.
–Mains plug: Type BS 1363 IEC320 Euro socket.
– Cable: H05VV-F 3G 1 mm2.
DOS00078
L
2000
Order No.
UP
04.000.056.9 1 unit
Euro Connection Cable
–
–
–
–
DOS00519
Mains voltage
– 250 VAC.
Nominal current
– 10 A.
Mains plug: IEC 320.
Euro socket IEC 320.
Cable: H05VV-F 3G 1 mm2.
USA: SJT AWG18 with USA approval.
L
900
900
Model
EU
USA
Order No.
UP
04.000.051.9 1 unit
04.000.052.9 1 unit
Dimensions in mm:
Conversion:
L = Length
n = Number of sockets
U = Standard rack unit
1 mm = 0.03937 inch
S = Switch
F1 = Standard side panel
UP = Packaging unit
1 kg = 2.2046 pounds
F2 = Design side panel
Safe = child-proof
19" = ideal for 19" components
Replace .x with the number of your color combination: .1 = RAL 7035, .6 = RAL 7035/RAL 2003
210
SafetySleeve™ Cable Protection IEC C19
– SafetySleeves protect the feed lines of the
network equipment.
–Compatible with all C19 cables and fit onto
all PDUs.
DOS20493
Material / Finish
– PVC, black.
Model
C20 plug in C19 socket
Order No.
03.910.212.9 001
UP
20 unit
Order No.
03.910.213.9 001
UP
50 unit
SafetySleeve™ Cable Protection IEC C13
– SafetySleeves protect the feed lines of the
network equipment.
–Compatible with all C13 cables and fit onto
all PDUs.
Material / Finish
– PVC, black.
DOS20494
Model
C14 plug in C13 socket
Dimensions in mm:
Conversion:
L = Length
n = Number of sockets
U = Standard rack unit
1 mm = 0.03937 inch
S = Switch
F1 = Standard side panel
UP = Packaging unit
1 kg = 2.2046 pounds
F2 = Design side panel
Safe = child-proof
19" = ideal for 19" components
Replace .x with the number of your color combination: .1 = RAL 7035, .6 = RAL 7035/RAL 2003
211
VERTIV™ RACK PDUS
Rack PDU Support and Warranty Options
Vertiv™ offers you various options to ensure that you get the support you need in the event of a fault. You can get in touch with your
usual contact person directly or contact us by phone or e-mail.
Technical Support
W
ebsite:
www.VertivCo.eu
T
elephone:
+800 1155 4499
E
-Mail:
[email protected]
Warranty Extension
When you purchase PDUs from us, you also have the option of ordering
warranty extensions for certain models. The following overview shows you the various options available for increasing your service level.
Order No.
Warranty term (months)
24
36
60
MPH2 B Version
(all B models vertical)
free of charge
WE1Y-MPH2VB
WE3Y-MPH2VB
MPH2 R, C, M Versions
(all R, C, M models vertical)
free of charge
WE1Y-MPH2VRCM
WE3Y-MPH2VRCM
MPH2 B Version
(all B models horizontal)
free of charge
WE1Y-MPH2HB
WE3Y-MPH2HB
MPH2 R, C, M Versions
(all R, C, M models horizontal)
free of charge
WE1Y-MPH2HRCM
WE3Y-MPH2HRCM
MPX Components
(excluding sensors and display)
free of charge
WE1Y-MPX
WE3Y-MPX
If a warranty case should unfortunately arise for your product, we will decide whether to
repair or replace the defective product based on the type of defect in question. Please
contact your usual sales contact in such cases.
212
VERTIV™ KNÜRR® @LOCK SYSTEMS
@Lock – solutions for racks
Access control for data centers and technical rooms
Data centers are broken into on a regular basis. In many cases, the
intention is simply to steal high-quality IT equipment. However, breaking in may only be
a pretense for stealing data and/or putting in place a
man-in-the-middle infrastructure.
On 28 February 2011 for example, an important data center belonging to a global
telecommunications service provider was paralyzed by intruders. Only a few weeks previously,
a DC service provider working on behalf of a major health care company became the victim of
an attempted break-in, which resulted in the entire security concept undergoing a TÜV audit.
Generally speaking, attacks of this kind go undetected. Data centers are security areas and
therefore need to be secured through various measures. An important part of this is controlling
access to and in the data center.
Controlling access to the data center is usually achieved through a combination of
organizational measures, e.g., gates and turnstiles, besides a building access control system.
Working with various partners, Vertiv has developed system concepts which not only improve
physical security through access controls within the data center but also simplify operative
processes, making them less susceptible to errors. These concepts are known as "@Lock".
@lock solution with MLR handles in a co-location datacenter
213
VERTIV™ KNÜRR® @LOCK SYSTEMS
Option 1: Transponder card system
@Lock "transponder card system" concept
This system concept can be applied
throughout – from the DC and cold aisle doors
to the individual cabinets. In addition to the card
readers and handles, the
extensive "Administration Suite" management
software is a key part of the system.
Thanks to its modular design and open infra­structure
architecture, the new Administration Suite can be
expanded as required and can also
be implemented for third party providers.
Encrypted data communication between the
hardware, server and client.
Runs on Windows 2000, Windows XP, Windows Vista,
Windows Server 2003, Windows Server 2008, Citrix.
Allows administration of various users with different
types of authorization.
Client/server capability.
Web client-capable, SNMP alarming.
Record changes made to the system by users.
Straightforward user guidance in spite of extensive
tools.
Wide range of alarm messages.
Automatic alarm notification via e-mail.
Centralized locking plans and access management.
Freely selectable four-eyes-principle.
Support for the most common transponder types.
Central management of various systems.
Records all actions in "Log Events".
Free replacement of the lock system if the authorizing
medium is lost.
Real-time visualization of the swing handle stations.
Configuration of special days with different locking
regimes.
Allocation of time profiles for access.
Able to export "Log Events".
Multilingual software.
Administration Suite 2.0
Order number: 01.180.049.9
MLR 3000 and MLR 5000 handles are suitable
for linking server or network cabinets to
the transporter card system. The E-LINE, by Dirak
mechatronic swing handles and the Administration
Suite software, provide a
convenient, reliable way of monitoring
access to your data or server cabinet. With the
Administration Suite software, security officers can
conveniently monitor and
manage access directly from a PC.
The integrated LEDs display alarm messages
and types of authorization on the handle itself.
As a result, technicians on site are given the same
information that the Administration Suite software sends to
the headquarters. LEDs at the top and bottom of the
handle offer permanently high
luminosity with low power consumption. As a
result, the lock status can be determined quickly, even from
a distance of several meters.
The top LED can indicate various statuses, such as
that the handle is ready to be opened or locked. The
bottom LED displays whether the handle is within or
214
outside the temperature range for the cabinet selected by
the customer. As a result,
irregularities may be identified quickly, leaving enough time
for appropriate action to be taken.
The information display integrated into the handle is
backlit and allows customer-specific information, such as
the cabinet row, cabinet number etc., to be added for extra
clarity.
Handles are also available with integrated
Keypad (MLR5000KP). They can be used with either
keycard, keypad or both (two-factor-authentification).
@LockMLR3000
@LockMLR5000
Technical data – @Lock MLR3000/5000
Handle electronics
Two-part hardware design
Visualization
Reader
Reader
Housing
Power supply
Standby current (system ready)
Max. current consumption (with connector tightening)
RS232 interface for MLR3000
Current increase for MLR5000 via Ethernet interface
TCP/IP interface
Connecting cable (reader - handle electronics)
Relay output (via screw clamps)
Door contact input (via screw clamps)
RS485 interface
Memory capacity for transponder cards
Memory capacity for events
Memory capacity for time profiles
Integrated real-time clock
Temperature range
Type
@LockMLR3000
@LockMLR3000
@LockMLR5000
@LockMLR5000
@LockMLR5000KP
@LockMLR5000KP
Swing handle and reader unit
Multicolored status LED
For 125 kHz transponders (HID 26 bit system), alternatively 13.56 MHz (MIFARE)
Reader unit in plastic housing can be fixed with screws or self-adhesive pad
12 V ± 10 % (DC) via low voltage socket
40 mA (DC)
440 mA (DC)
RS232 cable (RXD, TXD, GND, Reader present, PC present), 38,400 baud
125 mA (DC)
Ethernet, 10100 Autosense, up to 100 Mbaud
8-pole, 350 cm, UL stranded wire AWG 26, one side with gated RJ45 plug, one side with crimped JST ZH connector ZHR-8
2.5 mm2, can be screwed in from plug side, relay contact: 12 V, 3 A, 60 W, 120
2.5 mm2, can be screwed in from plug side, terminals 1 and 2
RS485 cable to the E-LINE by DIRAK Gateway, (+/A, -/B), 38,400 baud
2000 + 1 master transponder
500 (ring memory)
30
With buffering of up to 60 min at 25 °C
-20°C – +70°C
Model
for Miracel and DCM front door
for twin door (e.g. DCM rear door)
for Miracel and DCM front door
for twin door (e.g. DCM rear door)
for Miracel and DCM front door
for twin door (e.g. DCM rear door)
Accessories
Door contact
HID transponder card
Desktop reader for the initial reading of transponder cards
MLR3000 Gateway
Plug-in power supply (Europe)
Order No.
01.180.226.9
01.180.227.9
01.180.228.9
01.180.229.9
01.180.240.9
01.180.241.9
UP
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit
Bestell-Nr.
06.108.115.9
01.180.040.9
01.180.128.9
01.180.111.9
01.180.035.9
UP
1 unit
1 unit
1 unit
1 unit
1 unit
Other plug-in power supplies on request
215
VERTIV™ KNÜRR® @LOCK SYSTEMS
Technical data – MLU3000/5000
MLU card readers can be used to connect a
room door with existing electromechanical locking
or motorized cold aisle door (Coolfex):
T
hree-part hardware design MLU3000 set
comprising: external MLU reader, network reader
unit and MLU1000 lock.
Visualization on MLU reader: 2 x multicolored status
LEDs and 1 x backlit information display.
Antenna for 125 kHz transponders (HID 26 bit
system).
Optional MLU1000 lock
– Die-cast zinc (GDZn), color: matt chrome.
– 4 m control cable.
– Power supply 24 V DC +/- 10 % 100 mA.
– Proximity sensor status contact.
– Wall/sheeting thickness independent.
– Electronic opening by interrupting the power
supply.
MLU3000/MLU5000 network reader
– Housing reader unit in plastic housing can be
fixed with screws or a self-adhesive pad.
– Nominal input voltage 12/24/48 V ± 10 % (DC)
depending on the electronic lock connected.
– Standby current (system ready) 40 mA (DC).
– Max. current consumption RJ12 (LOCK) 1.5 A
(DC).
– Max. current consumption via relay clamp 3.0 A
(DC), clamps 10-11.
– RS232 interface RS 232 cable (RXD, TXD, GND,
Reader present, PC present), 38,400 baud.
– Connecting cable (reader - external MLU
antenna) 8-pole, 350 cm, UL stranded wire AWG
26, one side with gated RJ45 plug, one side with
Type
MLU 3000
MLU 5000
216
crimped JST ZH connector ZHR-8.
– Relay output (via screw clamps) 2.5 mm, can be
screwed on from plug side, relay contact: 12 V, 3 A,
60 W, 120 VA, terminals 3 - 5.
– Door contact input (via screw clamps) 2.5 mm2 can
be screwed from plug side, terminals 1 and 2.
– RS485 - RS485 interface - cable to the E-LINE
by DIRAK Gateway, (+/A, -/B), 38,400 baud
(MLU3000).
– TCP/IP Ethernet interface, 10/100 Autosense, up to
100 MBit/s (MLU5000).
– Power off when open/closed: depending on the
electronic lock connected, this is configured in the
Administration Suite Config Tool.
– Memory capacity for transponder cards 2000: + 1
master transponder.
– Memory capacity for events:
500 (ring memory).
– Memory capacity for time profiles: 30.
– Integrated real-time clock with buffering of up to
60 min at 25 °C.
– Temperature range -20°C – +70°C.
Order No.
01.180.231.9
01.180.232.9
UP
1 unit
1 unit
Option 2: Potential-free contacts
@Lock "potential-free contacts" system concept
Swing handles from the @Lock MLR1000 range are suitable for
connecting electromechanical swing handles to existing building management
systems or local identification systems, in addition to
complementing @LockBlueID or rack monitoring systems.
During this period, the user can open the MLR1000 by pressing a button.
The LED at the top of the handle offers permanently high luminosity with
a low power consumption. As a result, the lock status can be determined
quickly, even from a distance of several meters.
The handle can be opened as soon as its potential-free contacts are activated or a voltage
of 12-24 V DC is supplied. Following activation, the MLR1000 switches to ready-to-open
status.
The information display integrated into the handle is backlit and allows
customer-specific information such as the cabinet row, cabinet number etc.,
to be added for further clarity.
Technical data – @LockMLR1000
Handle electronics
Two-part hardware design
Visualization
MLR1000 Box
Housing
Power supply
Standby current (system ready)
Max. current consumption (with connector tightening)
Operating mode
Relay control
Operating time
Contact output
Installation position
Connection type
Connecting cable (reader - handle electronics)
Temperature range
MLR1000 and MLR1000 Box
Status LED
Interface unit, plastic housing can be fixed with screws or self-adhesive pad
12 V DC ± 10 % via screw clamps
40 mA (DC)
410 mA (DC)
100 % ED
12V DC
Max. 3 seconds
250 V AC, 2 A
Vertical
Screw clamps, 2.5mm2
8-pole, 350 cm, UL stranded wire AWG 26, one side with gated RJ45 plug, one side with crimped JST ZH connector ZHR-8
-20°C – +70°C
@Lock MLR5000
Admin Suite
@Lock MLR3000
Admin Suite
@Lock MLR1000
Custom
@Lock BlueID
Web browser, Mobile phone app
E-Line Administration
Yes
Yes
No
No
Suite Software
Yes
Yes
Yes
No
Transponder card
Transponder card
Dependent on customer's
equipment and software
BlueID
Yes
Gateway
No
Optional
Identification
Yes (in combination w.
Administration Suite)
Yes (in combination w.
Administration Suite)
Dependent on customer's
equipment and software
Optional
IP support
Yes (in combination w.
Administration Suite)
Yes (in combination w.
Administration Suite)
Dependent on customer's
equipment and software
No
Log files
Yes (in combination w.
Administration Suite)
Yes (in combination w.
Administration Suite)
Dependent on customer's
equipment and software
Yes
No
Eline by Dirak
No
Eline by Dirak
No
Eline by Dirak
Yes
BlueID by Baimos Technologies
Software necessary
External emergency
power supply connector
User profiles
Four-eyes-principle
Off-line mode
Technology partner
Type
@LockMLR1000
@LockMLR1000
Model
for Miracel and DCM front door
for twin doors (e.g. DCM rear door)
Order No.
01.180.224.9
01.180.225.9
UP
1 unit
1 unit
217
VERTIV™ KNÜRR® RMS COMPACT II®
Vertiv™ Knürr® RMS Compact II®
Constant Reliability with Remote Monitoring
The advantages of Vertiv Knürr’s
modern rack monitoring system:
Guarantees fault-free operation.
Early disturbance detection.
Incident logging.
Automatic monitoring simplifies
maintenance.
Activates countermeasures in the
event of a malfunction.
Central status control of: filters, paper,
toner, meter readings, inspection
intervals, and much more.
Up to 12 sensors can be connected in
any arrangement.
218
System Reliability and Availability
System and network management
requirements mean the systems’ ambient
conditions must be monitored. Compliance
with the required ambient parameters is
extremely important for successful/
continuous operation of high-grade
components.
Management Software
Inadmissible fluctuations in temperature or
humidity often cause hardware defects.
Constant automatic monitoring of these
parameters is therefore a basic requirement
for safeguarding operability. All the relevant
data can be recorded and forwarded
directly to a higher-level management
system, e.g. Nagios Vertiv Nform™ with the
Vertiv Knürr RMS Compact II®.
Alarm Consolidation and Control
Simply recording data does not suffice to
ward off damages. When faults occur, short
response times are aided by the monitoring
system triggering actions automatically
(e.g. activating additional fans).
Fast Response
When defined incidents occur, the RMS
Compact II can immediately send a
message as an "SNMP trap" to the
management system or directly as
an e-mail to a technician or an SMS
gateway.
Vertiv™ Knürr® RMS Compact II®
RMS20013
RMS20015
RMS20047
Description
– Compact construction - Zero unit solution (for
mounting outside the 19" installation area).
– 19" installation with adapter bracket.
– Safe clamping of all connected cables with integrated
cable clamping bracket.
– Cost-effective orderly installation with Plug & Play
concept.
– Convenient cabling with RJ45 sensor connections.
– TCP/IP connection via Ethernet (10/100 Base T).
– Configuration via SNMP and Web-Browser.
– Web access is password-protected and optionally
encrypted (https).
– 3 different user levels.
– Freely programmable filter system (Boolean logic) for
implementing all alarm conditions.
–C
ompatible with standard network-management and
infrastructure-management systems such as Vertiv
Nform™ or Open-Source.
– S ensors for monitoring all relevant environmental
influences (optional).
– Internal power supply for sensor equipment (no
additional power supply necessary).
– Alarms via LEDs, relay, network management or e-mail
(SMTP).
– Support from Modbus/TCP.
– System time balancing with NTP servers.
– 3 digital outputs (2 x relay, max. 3 A at 230 VAC, 1 x
750 mA at 48 VDC).
– Power supply: 100 – 240 VAC.
– Operating voltage: 12 VDC.
Compliance
– CE Marking compliant with
– 2014/35/EU Low Voltage Directive (LVD)
– 2014/30/EU Electromagnetic Compatibility
Directive (EMC)
– 2011/65/EU RoHS2 Directive.
Color
– RAL 7021, dark-grey.
Scope of delivery
– 1 x Knürr RMS Compact II.
– 1 x power supply unit.
– 2 x 19" mounting brackets.
– 1 x support bracket for power supply unit.
– 1 x CD ROM (with manual, MIB file)
How supplied
– In sets.
T
echnical data
– 12 universally usable sensor inputs for temperature
and humidity sensors, digital (on/off) or analog
sensors (0...10V).
W
350
H
42
D
170
Model
RMS Compact II®
Order No.
06.108.200.8
UP
1 set
RMS20048
219
VERTIV™ KNÜRR® RMS COMPACT II®
ECO Temperature Sensor
Door Contact Sensor
Quick and easy installation
– Insensitive to disturbances.
– No additional power supply required.
– The sensor must be recalibrated.
LUF20069
RMS20006
Technical data
– Temperature measurement range: 0...60°C.
– Accuracy : ± 5 %.
Scope of delivery
– 1 x sensor.
– 1 x mounting kit.
Model
ECO
Order No.
06.108.220.9
N
o additional magnet required
– Magnet bridge sensor works on all magnetic conductive materials (no special mating part required).
– Can also be used for monitoring side panels and
roof.
– Standard cable length, 4 m.
Technical data
– Temperature range: -20° C to +70° C.
– Switching voltage, max. 200 VDC.
– Switching current, max. 500 mA.
Scope of delivery
– 1 x sensor with 4 m connection cable.
– 1 x mounting kit.
UP
1 unit
Order No.
06.108.215.9
Humidity Sensor
RMS20019
(similar to picture)
RMS compact-specific
Avoids dew
– Insensitive to disturbances.
– Additional power supply required.
– The sensor does not have to be recalibrated.
Air Speed Sensor
Technical data
– Air measurement range 30 – 90 %.
– Accuracy: ± 5 %.
RMS20032
Scope of delivery
– 1 x sensor with RJ45 port.
– 1 x mounting kit.
UP
1 unit
Water Sensor
Conductive water spot sensor
– Detects presence of water.
Technical data
– Operating voltage: max. 24 VDC.
Scope of delivery
– 1 x sensor with 2 m connection cable.
– 1 x mounting bracket.
RMS20031
Order No.
06.108.217.9
W
20
H
39
Fan
and filter monitoring
– No additional power supply.
– Automatic detection as analog sensor.
– Does not have to be recalibrated.
– Offset and alarm parameters can be set in RMS.
Technical data
– Measurement range: 0 to 1 m/s.
– Non-linear measurement,
Value table:
< 0 m/s < 1 V
0 m/s 1 V
1 m/s 1.7 V
2 m/s 2.9 V
3 m/s 4.1 V
4 m/s 5 V (6 V max.).
Scope of delivery
– 1 x sensor with 4 m connection cable.
– 1 x mounting kit.
Order No.
06.108.212.9
D
9
Order No.
06.108.218.9
UP
1 unit
UP
1 unit
Dimensions in mm:
220
UP
1 unit
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
UP = Packaging unit
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
Smoke Detector
S
ends signal to IT Department
– Optical smoke detector with VdS approval.
– For early fire detection with smoke
emission.
– Power supply provided via RMS compact.
– Standard cable length, 4 m.
W
Ø 90
Sensor Cable
Technical data
– Operates between -20°C and +75°C.
Scope of delivery
– 1 x sensor with 4 m connection cable.
– 1 x mounting kit.
H
75
Order No.
06.108.211.9
UP
1 unit
Plug & Play for own sensors
(Third party and/or any existing analogue/
digital sensor)
– The 4 m long cable is used for connecting
further analog/digital sensors or alarm
outputs to the sensor input of the Knürr RMS
compact II.
– One end of the cable has an RJ45
connection while other end is open.
– The RMS automatically recognizes a sensor
that is connected to this cable as an analog
sensor.
– A sensor can be supplied with 12 V voltage
using the cable.
Technical data
– Length: 4 m.
Scope of delivery
– 1 x cable.
– 1 x layout overview.
How supplied
– In sets.
Vibration Sensor
P
rotection against vandalism
– Detects vibrations.
– Theft prevention.
– Reset possible via Viewer software.
Model
Analog sensor cable
Digital sensor cable
Scope of delivery
– 1 x sensor with 4 m connection cable.
L
4000
4000
Order No.
06.108.225.9
06.108.224.9
UP
1 unit
1 unit
Order No.
06.108.213.9
UP
1 unit
Sensor Extension Cable
Flexible positioning of sensors
– The cable is used for extending RMS
compact II sensors.
– It consists of a cable with a connected RJ45
plug and an RJ45 connector.
Passive Infrared Movement Sensor
Security
– Room monitoring with state-of-the-art
technology.
Scope of delivery
– 1 x sensor with 4 m connection cable.
– 1 x mounting kit.
Technical data
– VdS approval: Classes A + B.
– Range of volumetric lens: 2 – 16 m.
– Long lens range: 29 – 50 m.
– Curtain lens range: 17 – 30 m.
– Manipulation monitoring.
– Digital fault evaluation.
– Corner or wall mounting.
Scope of delivery
– 1 x cable.
How supplied
– In sets.
Technical data
– Length: 3 m and 10 m.
Model
Sensor extension cable
Sensor extension cable
L
3000
10000
Order No.
06.108.223.1
06.108.223.5
UP
1 unit
1 unit
Power over Ethernet (PoE) Update Set
Order No.
06.108.214.9
UP
1 unit
S
ave on cabling
– Saves on costly power supply installations
(e.g. WLAN access points) or enables
centralized UPSs for decentralized
equipment (e.g. IP phones).
– Using the PoE update set, the RMS can
therefore support installations with the
corresponding UPS concepts and/or nonstandard IDF room.
Approvals
– EMI: FCC Part 15 Class B, CE Class B.
– Safety: UL, TUV.
Scope of delivery
– 1 x PoE adapter.
– 1 x mounting bracket for easy attachment to
the RMS (similar to the classic power supply
unit mounting bracket).
Technical data
– Input: 48 V DC, 400 mA.
– Output: 12 V DC (12 W).
– Operating temperature: 0° to 40° C.
– Storage temperature: -40° to 70° C.
– Operating air humidity:
10% to 80% rel. humidity.
How supplied
– In sets.
Dimensions
– Length: 81 mm.
– Width: 52 mm.
– Height: 28 mm.
Model
PoE update set
Order No.
06.108.230.8
UP
1 unit
221
VERTIV™ KNÜRR® RMS COMPACT II®
Carbon Monoxide
Alarm Sensor
D
etects smoke-free gases
and triggers an alarm
– Used for detecting carbon monoxide
emitted by burning fire-retardant cables.
– Sends signals carbon monoxide to the
RMS and triggers an alarm.
– Standard cable length, 4 m.
– The RMS automatically recognizes this
sensor as a digital sensor.
Technical data
– Operating voltage: 12 VDC (± 20 %).
– Power consumption: approx. 190 mA (idle)
approx. 280 mA (alarm).
– Sensitivity: 100 ppm CO.
– Ambient temperature:
-15° C to 40° C.
– Piezo alarm: approx. 85 dB(A) at 3 m away.
– Protection rating: IP 20.
– Switching output 12 V DC:
Max. 170 mA.
– Relay output: Changeover contact, max. 5
A 230 V DC, max. 5 A 30 V DC.
– Reset: automatic when the gas
concentration falls below sensitivity level.
Color
– White.
Scope of delivery
– 1 x sensor.
– 1 x sensor connection cable.
– 1 x Mounting kit.
– 1 x Instructions.
How supplied
– In sets.
Dimensions
– Length: 140 mm.
– Width: 125 mm.
– Height: 40 mm.
Model
Carbon monoxide alarm sensor
Order No.
06.108.211.8
Dimensions in mm:
W = Width
h = Installation height
H = Height
d = Insertion depth
D = Depth
L = Length
222
UP
1 unit
Conversion:
U = Standard rack unit
(1 U = 44.45 mm)
UP = Packaging unit
kg = Weight
1 mm = 0.03937 inch
1 kg = 2.2046 pounds
Vertiv™ Nform™
Increases Reliability and Energy Efficiency
Vertiv™ Nform™ helps meet these requirements:
Overview of data center status
Vertiv Nform is data-center monitoring software especially for Vertiv infrastructure systems
with a trend analysis function, alarm management and result notifications.
What does Vertiv Nform offer?
Vertiv Nform provides a uniform monitoring interface with an overview of the operative
status of a large number of devices, such as:
- PDUs: Liebert MPX®, Liebert MPH®, Knürr DIS Rack PDU® RM.
Uninterrupted power supplies.
Water-cooled racks, such as:
- Vertiv Knürr CoolLoop®, Vertiv Knürr CoolTherm®.
Thermal management equipment.
Environmental monitoring systems, such as:
- Vertiv Knürr RMS Compact II®.
223
INLINE METERING SYSTEM
Inline Metering System (IMS)
Optimum Upgrade Solution for Existing Installations
Vertiv Inline Metering System (IMS)
benefits:
Existing rack PDUs can be retrofitted
for optimal savings.
Almost all consumers can be
integrated into the monitoring system,
since numerous plug systems are
provided (1 ph – 3 ph, max. 63 A per
phase).
Flexible installation inside or outside
the rack (e.g. on shelf).
Monitoring is already part of the everyday routine in most data centers when it comes to
system availability. Consequently, new systems are equipped with socket strips or PDUs
with integrated monitoring (Managed PDUs or Adaptive PDUs). Yet, what can be done
about existing systems containing socket strips
or PDUs that do not provide measuring functions?
Vertiv's solution for this is called IMS (Inline Metering System). These modules allow
existing racks with installed basic power distributors to be upgraded accordingly. As
almost all server racks are supplied with an A and B-feed, retrofitting is possible without
have to interrupt operation. The IMS modules can also be installed inside or outside the
rack; e.g., on the shelf to save space.
VERTIV MPX IMS
IMS model series overview
224
Features
The rack PDU software interface is familiar; communication card is the same as the ones for MPX/
MPH.
Highest possible reliability and availability with an operating temperature of max. 55°C.
Comprehensive measurement functions (electricity, current, power and energy) with a high
measurement accuracy of up to ± 1 %.
N-conductor overload with 3-phase systems can be prevented as the N-conductor current is
monitored.
Easy connection to the network of up to 4 Liebert MPX IMS / MPH / MPX with only one IP address.
External sensors and a display can also be connected.
INPUT POWER
Single-phase or three-phase
16 A up to max. 63 A
10.3A
1-1
119.5V 4.32kW 5.17kVA
12345
10.3
10.3
OUTPUT DISTRIBUTOR
Single-phase or three-phase
16 A up to max. 63 A
1-1
A
1-1
A
119.5V 4.32kW 5.17kVA
119.5V
1 2 3 4 5 4.32kW 5.17kVA
12345
IP
10.3A
1-1
MONITORING
Input level.
119.5V 4.32kW 5.17kVA
1 2 31-14 5
A
10.3
IP
IP
119.5V 4.32kW 5.17kVA
12345
10.3
10.3
1-1
A
1-1
A
119.5V 4.32kW 5.17kVA
119.5V
4.32kW 5.17kVA
1-1
A
12345
1-1
1 2 3119.5V
4 5 4.32kW 5.17kVA
A
LOCAL MONITORING
Display for user (MPX™ IMS).
10.3
10.3
IP
1 2 3 4 5 4.32kW 5.17kVA
119.5V
12345
1-1
10.3A
IP
IP
REMOTE MONITORING
Secure web and SNMP interfaces
119.5V 4.32kW 5.17kVA
12345
10.3A
10.3A
1-1
1-1
119.5V
4.32kW 5.17kVA
119.5V
1 2 3 4 5 4.32kW 5.17kVA
12345
RACK PDU ARRAY™
One IP address; up to 4 rack PDUs (MPX IMS)
MPX, MPH™ and IMS in the same private network
225
INLINE METERING SYSTEM
Vertiv IMS – product series
Features
Vertiv MPX™ IMS
Knürr Modular IMS
Measurement module
Modular
Display
External
Remote interface
Measuring at input level
Measurement modules per IP address
4
75
Max. measurement points per IP address
4
300
Visualization at PDU level
Visualization at rack level
Visualization at room level
Only with additional software:
Vertiv Nform or Avocent DSView
Measurement parameters
A, V, W, kWh
A, V, W, VA, Var, kWh, cosphi
1 ph + 3 ph, max 63 A
1 ph + 3 ph, max. 63 A (max. 4 feeds ), max. 3 ph 999 A (via external
transducer)
IEC 60309
IEC 60309, GST18, fixed connection
HTTP, HTTPs, SNMP, Telnet
HTTP, HTTPs, SNMP v3,
Only with additional software:
Vertiv Nform or Avocent DSView
Oracle, MySQL, MSSQL
1 ph. 16 A
MPXIMS-EHBBXS30
On request
1 ph. 32 A
MPXIMS-EHBBXQ30
On request
3 ph. 16 A
MPXIMS-EHBBXT30
On request
3 ph. 32 A
MPXIMS-EHBBXR30
On request
3 ph. 63 A
MPXIMS-EHBBXZ30
On request
Phase asymmetry analysis
External sensor connection options
Input power
Connection option
Protocols
Storage in external database
Order number
226
Easy Upgrade from Basic Power Distributor to Measurement-enabled Power Distributor
227
INLINE METERING SYSTEM
Vertiv™ MPX™ IMS
IMS_8141
– Existing rack PDUs do not have to be
replaced as the modules can be retrofitted.
–Almost all consumers can be integrated into the
monitoring system, since numerous plug systems are
provided (1 ph – 3 ph, max. 63 A per phase).
–Flexible installation inside or outside the rack (e.g. on
shelf).
–Liebert® Rack PDU software interface is familiar;
communication card is the same as the one for Liebert
MPX/MPH.
–Highest possible reliability and availability with an
operating temperature of max. 55°C.
–Comprehensive measurement functions (electricity,
current, power and energy), with high measurement
accuracy of up to ± 1 %.
–N-conductor overload with 3-phase systems can be
prevented since the N-conductor current is monitored.
–Easy connection to the network of up to 4 Liebert
MPX IMS / MPH / MPX with only 1 IP address.
–External sensors and a display can also be connected.
Technical data
Interfaces:
– RJ-45 LAN port (10/100 MBit) for connecting to
local area network (LAN) via an Ethernet cable.
– Expansion / administration port for local
configuration using a computer / laptop, for setting
up a link-up of several PDUs (Liebert MPX™ or
MPH™).
– Serial interface RS232.
– Display port for connecting the RPC BDM (display
module).
– External sensor port for connecting optional sensors.
– Remote management: Onboard web interface, CLI,
SNMPv1, 2, 3, SSH, Telnet, integratable into Avocent
ACS, UMG & MPU, DSView, Rack Power Manager,
Vertiv Nform & Vertiv Trellis as well as Nagios or
other management software programs.
– Authentication: local, remote; active directory, LDAP,
TACACS, Radius, Kerberos.
– Encryption: MD5, AES, DES.
Material / Finish
– Enclosure: aluminum.
–C
over: sheet steel.
Dimensions
– Height: 81 mm.
– Width: 75 mm.
– Length: 266 mm.
– Input cable length: 3 m.
–O
utput cable length: 0.5 m.
Certification
– CE label in accordance with
Low Voltage Directive 2006/95/EC.
– EMC Directive 2004/108/EC.
– BV GS.
Color
– Enclosure: aluminum/RAL 7021 dark-gray.
Scope of delivery
– 1 x MPXIMS-Module/power supply.
How supplied
– In sets.
Supported technologies:
– Web support provided by Liebert MPX control and
management. Authorized users can view status
information via their network.
– SNMP support provided by Liebert MPX SNMP
management.
– Easy integration into Vertiv Nform, Avocent
DSVIEW3 and Nagios.
Model
Vertiv MPX™ IMS 1 x 16 A
Vertiv MPX™ IMS 1 x 32 A
Vertiv MPX™ IMS 3 x 16 A
Vertiv MPX™ IMS 3 x 32 A
Vertiv MPX™ IMS 3x63A
228
L
266
266
266
266
266
Input values
230 VAC, 16 A
230 VAC, 32A
230/400 VAC, 16 A
230/400 VAC, 32 A
230/400 VAC, 62A
Input connector
IEC60309 1ph/N/PE 6h
IEC60309 1ph/N/PE 6h
IEC60309 1ph/N/PE 6h
IEC60309 1ph/N/PE 6h
IEC60309 3ph/N/PE 6h
Output socket
IEC60309 1ph/N/PE 6h
IEC60309 1ph/N/PE 6h
IEC60309 1ph/N/PE 6h
IEC60309 1ph/N/PE 6h
IEC60309 3ph/N/PE 6h
Order No.
MPXIMS-EHBAXS30
MPXIMS-EHBAXQ30
MPXIMS-EHBAXT30
MPXIMS-EHBAXR30
MPXIMS-EHBBXZ30
UP
1 unit
1 unit
1 unit
1 unit
1 unit
Vertiv™ Knürr® Modular IMS
IMS_Modular
–Existing rack PDUs modules can be retrofitted.
–Almost all consumers can be integrated into the
monitoring system, since numerous plug systems are
provided (1 ph – 3 ph, max. 63 A per phase).
–Flexible installation inside or outside the rack (e.g. in
shelf).
–Extensive measurement functions (electricity, current,
effective power, apparent power, reactive power,
energy and power factor), with high measurement
accuracy of up to 0.17 % (referring to the end value of
the specific measurement range).
–Very high input currents can be measured (up to 999
A per phase via external transducer).
–The modular setup means the solution can be
customized (e.g. up to 4 in-feeds per module with
different input plugs or even fixed feed).
–Up to 75 modules can be controlled via one IP
address.
–Storage in external databases possible without
additional software.
Technical data
– The measurement modules can only beoperated
with a control unit.
– No more than 75 measurement modules can be
connected to a single control unit.
– 2 x RJ 45 LAN Port 10/100MBit for local network
connection (on the control unit).
– Visualization of all connected measurement modules
via WEB.
– Status information visible via WEB.
– Protocols: HTTP, HTTPs, SNMPv3.
Model
Knürr Modular IMS 1x16 A
Knürr Modular IMS 1 x 32 A
Knürr Modular IMS 3 x 16 A
Knürr Modular IMS 3 x 32 A
Knürr Modular control unit
Input values
2 x 230 VAC, 16 A
2 x 230 VAC, 32 A
2 x 230/400 VAC; 16 A
2 x 230/400 VAC; 32 A
Input connector
2 x IEC60309 1ph/N/PE 6h
2 x IEC60309 1ph/N/PE 6h
2 x IEC60309 1ph/N/PE 6h
2 x IEC60309 1ph/N/PE 6h
– Storage in external data base possible (Oracle,
MySQL, MSSQL).
– Integration into building systems also possible via
potential-free contacts.
– Temperature sensors can be connected.
Dimensions
– Length/depth (control unit): 600 mm.
– Length/depth (module): 400 mm.
– Width: 483 mm (19").
– Height: 88.8 mm (2 U).
– Power supply cable: length, 2 m.
– Output: socket fixed on device.
Approvals/certificates
– CE label in accordance with
Low Voltage Directive 2006/95/EC.
– EMC Directive 2004/108/EC.
– FFC.
– GS Certificate.
– CB scheme.
Color
– RAL 7021, dark-gray.
Scope of delivery
– 1 x Measurement modules, control unit.
How supplied
– In sets.
Output socket
2 x IEC60309 1ph/N/PE 6h
2 x IEC60309 1ph/N/PE 6h
2 x IEC60309 1ph/N/PE 6h
2 x IEC60309 1ph/N/PE 6h
Order No.
On request
On request
On request
On request
On request
UP
1 unit
1 unit
1 unit
1 unit
1 unit
229
VERTIV™
Glossary
Adaptive Architecture
Industry Terms and Phrases
Liebert Adaptive Architecture™
The Liebert Adaptive Architecture product and technology family distinguishes
itself by delivering an ideal balance between minimal TCO and optimal
availability.
Availability
Availability is achieved through proven technology or a system that minimizes
malfunction risks and downtimes of your IT system.
Open Architecture/Closed Architecture
Open architecture utilizes cooling coils and the room's air volume as thermal
storage to guarantee continuity in the event of power failures.
Closed architecture means that the rack is entirely closed off. The cooling coils
are inside the enclosure. Other provisions must be made to bridge power
failures.
Redundancy
Measure of a system's failure tolerance and the extent to which maintenance
work can be performed on a product in operation
without function loss..
Systems without redundancy can fail as soon as one single component
fails; or cannot be operated during maintenance work.
Redundancy is achieved with the parallel setup of the same components,
of which at least one of these is not required for the system to achieve
100 % functionality. Such a setup means that even the failure of important
components or planned maintenance work will not impair the product's
continuous operation. Redundancy concepts can therefore deliver very
high system availability levels.
The highest level of redundancy is attained with the installation of two
independent systems whose incoming and outgoing lines are also
separated. Preventive maintenance work or component faults do not
impair the system's performance because the second system can take over
the entire desired functionality at any time.
230
Flexibility
"Flexible" products and systems that can be reconfigured or
extended to meet the requirements of new technologies, provide even more
protection, or meet the requirements of corporate growth or business changes.
Total Cost Of Ownership
All operating costs (TCO) of a solution, including purchase, future changes and
maintenance.
Power Supply
Cooling
Power supply; three-phase (EMEA)
A three-phase power circuit has three conductors, an earth
connection, and in most cases, a neutral conductor. Typical
voltages for such power circuits are 380 V, 400 V and 415 V.
Back cooling
Absorbs the heat generated by air-cooled condensers and dry
coolers for all ambient temperatures or heights. Hot air or hot water is drawn
off; water is cooled and recirculated.
Power supply; single-phase (EMEA)
Single-phase power circuits have two cables and an earth
connection. Typical voltages are 220 V, 230 V and 240 V.
Precision cooling
The precise controlling and regulation of temperatures, moisture or air filtering.
Power density
More power. More heat generation. Less space. Since the
performance of processors is constantly growing but the amount of space
available is decreasing, power density rises (from less than 50 to more than
300 watt per m2). This generates far more heat,
resulting in hot spots that can occur in your data center.
UPS types: Online and Line Interactive
An online UPS is used to back up critical applications and guarantee a
continuous, uninterrupted power supply. Frequency and wave form are also
regulated. A line-interactive UPS prevents voltage peaks and inadmissible
power-supply parameters. This energyefficient technology regulates the power supply and the battery backup system
which is especially ideal for installations that rarely suffer power failures, but
frequently suffer supply fluctuations.
Battery capacity
The percentage power capacity of your batteries, depending on their age,
usage period, environment, ambient temperature and maintenance status. A
normal VRLA battery can achieve 80 % and has to be replaced after 3-5 years.
Battery runtime
The time (in minutes) in which your batteries provide power supply and protect
your information in the event of a power or system
failure.
kW
Standard measurement unit for electrical power. 1 kW is 1,000 W or power
consumption of 1,000 joules per second. (1 joule is the
required energy it takes to heat 1 kg of water by 1°C.)
Hot Aisle / Cold Aisle
A highly efficient method of improving performance with existing raised floor
systems with high-density rack-based installations.
The racks and frames are set up to create "hot" and "cold aisles". Perforated
bottom covers from which the raised floor's cool air flows are only placed in the
cold aisles.
Sensible heat
"Sensible" or "tangible" heat can can be directly sensed or
measured. Sensible heat changes a material's temperature.
Essentially, it provides information on temperature, comparable
to that of a weather forecast. Sensible heat is measured with a
thermometer. Severs, for example, emit solely sensible heat.
Latent heat
"Latent heat" is the heat energy that goes into a material's state change. During
a thermally managed cooling process, latent heat is diverted into the air by
vapor condensation when the air is cooled below dew point (dehumidification).
Latent heat discharge does not have any effect on the temperature you feel.
Total heat
Total heat is composed of the heat content of the air (sensible heat) and the
water-vapor mixture (latent heat). It is crucial for the
thermal device's nominal power.
BTU
BTU is a heat energy unit. It is the amount of heat required to
raise the temperature of 1 British pound of water by 1 degree
Fahrenheit (at sea level). One ton of cooling power is equal to 12,000 BTU/hour.
Ton
A ton, in relation to cooling systems, is the amount of heat required to melt 1
ton of ice in 24 hours. A ton is equal to 12,000 BTU/hour or 3,025,900 calories/
hour.
231
VERTIV™
Centers of Expertise
When you partner with Vertiv for your
business continuity needs across your
enterprise, you benefit from more than
products to support and protect your
technology infrastructure.
Developing such a wide range of
technologies gives us in-depth industry
knowledge and a
“big-picture” understanding of
how all systems must work together
within any critical environment.
We deliver this knowledge through
Vertiv's Centers of Expertise: distinct
areas of
world-class products and services that
help you determine what you need and
where, depending on your application.
All so that you can keep your business
moving forward for your customers.
AC Power
Sustaining critical operations that simply can’t go down. We deliver a full range of uninterruptible
power systems plus STS devices, providing everything from individual products to integrated power
protection solutions that keep network closets, computer rooms and data centers up and running.
DC Power
Supporting voice and communication networks through reliable and efficient DC power. The
extensive DC power portfolio includes a wide range of -48 V and 400 V DC systems; from sub-racks
to large stand-alone systems. Improved reliability, increased energy efficiency and load balancing is
enabled through the Intelligent Load Management functionality (patent pending).
Infrastructure Management & Monitoring
Managing and monitoring critical environments at multiple sites around the clock. We make it easy in
today’s ROI-driven business environment, with comprehensive infrastructure management and
monitoring systems for both IT and facilities. Solutions and services that provide continuous
oversight of data centers, computer rooms and network closets, as well as wireless, wireline and
enterprise telecom applications.
Power Switching & Controls
Safeguarding facilities from operational disruption due to electrical power interruption. We provide
ASCO® power-transfer switches, generator paralleling switchgear/power control systems, and touch
screen SCADA for monitoring and control of the utility service and on-site backup power generators;
all helping to ensure continuity of supply to essential and mission-critical communications, dataprocessing, life-safety, and other critical loads. Backed by the largest manufacturers, direct field
based project management and service technicians in the industry.
Thermal Management
Managing the heat transferred from the data center to the external environment, while assuring the
right temperature and airflow for each server. The Thermal Management range of Liebert® solutions
answers to all different customer needs and applications, adopting state-of-the-art technologies to
achieve the highest efficiency while minimizing energy costs.
232
Racks & Integrated Solutions
Optimizing technology and performance needs for indoor IT applications. We deliver standard and
customized integrated cabinet solutions that meet unique and specific needs, from Knürr® and
Liebert® rack solutions for computer rooms of all sizes to integrated racks with self-contained
cooling, UPS and cable management in a solid, lockable cabinet.
Surge Protection
Defending power, voice and data moving through a network against grid irregularities and dangerous
electrical disturbances. Depending on the application, we offer Liebert® and PowerSure™ AC Power
Protection, Islatrol™ Active Tracking Filters and Edco™ data/signal surge protective devices; all of
which provide power protection to reduce downtime, saving crucial man-hours and extending
equipment life.
Service and Solutions
Delivering assessment, testing and reliability programs backed by the largest global services
organization in the industry. We offer engineering, installation, startup services, project management
and training together with entire life-cycle management including preventive and predictive
maintenance, remote diagnostics, on-site operations management, and energy consumption
monitoring.
233
VERTIV™
Vertiv™
Data Center Infrastructure for Large Applications
Vertiv™ SmartAisle™
• Aisle containment.
• Provides highest energy efficiency.
•Control compatible with Thermal Management units.
Vertiv Knürr Power Distribution Rack
4
Central connection unit for power supplies in individual server racks.
6
•Interface between the low voltage feed and PDU.
•Individual plug-in units.
4
• Up to 346 kVA/Rack.
7
1
3
4
Rack PDU
Rack-based power distribution units.
• Supports strip-level metering, outlet-level switching and outlet-level metering/switching for
remote power management and control.
• Horizontal and vertical models designed for a variety of rack configurations in branch and
remote offices.
234
1
AC Power
3
2
Infrastructure Management
& Monitoring
4
Power Switching
& Controls
Thermal
Management
5
Racks & Integrated
Cabinets
6
Surge Protection
7
DC Power
Service
Vertiv supports entire critical
infrastructures with the largest global
service organization and an extensive
service offering, enhancing network
availability and ensuring total peace of
mind 24/7.
4
7
Our approach to servicing critical
infrastructure covers all aspects of
availability and performance: from single
power and thermal management equipment
to entire mission-critical systems.
1
The most comprehensive insurance for
business protection can be obtained with a
service program from Vertiv™ which
includes access to Vertiv LIFE™ Service.
5
2
Vertiv™ LIFE™ Services
Vertiv Knürr® DCD
Passive chilled water heat exchanger.
• Cooling capacity up to 35 kW.
• “Room-neutral” design.
• Usable for third party racks.
Vertiv Knürr Miracel®/Knürr® DCM
Global rack platform for data centers,
networks and telecommunications.
• Lightweight aluminum frame.
• T-slot system.
• Simple cable management.
• Holds up to 1,500 kg.
• Also available with @lock (electronic
locking solutions).
Vertiv LIFE Services provides remote
diagnostics and preventive monitoring
service for UPS and thermal management
equipment.
Vertiv LIFE Services delivers increased
uptime and operational efficiency by
enabling continuous monitoring of your
equipment, expert data analysis and field
engineering expertise.
Through the data transferred from your
equipment via Vertiv LIFE Services, our
remote service experts gain the real-time
insight and information needed to quickly
identify, diagnose, and resolve any
irregularities that may arise in operation,
ultimately taking responsibility for your
critical assets 24/7.
235
VERTIV™
INDEX
Keyword
Product
Page
A
@lock
Keyword
Product
Combi Lock
MIR2/DCM
213
ConAct
Page
Keyword
Product
46
E
119
Earthquake kit
DCM
Page
49
Access control
Vertiv SmartAisle
132
Connecting cable
PowerTrans2
161
Electronic lock
Vertiv SmartAisle
131, 136 - 137
Air partition
MIR2/DCM
39
Connecting cable
Vertiv MPH2
184
Enclosure
Vertiv SmartAisle
124
Air partition
Kabelmanager
77
Connecting cable
Vertiv MPE
189
End piece
Kabelmanagement
74
Air velocity sensor
RMS Compact II
220
Connecting line
Knürr DIS Rack PDU
209
End separator strip
Vertiv SmartAisle
135
Aisle discharge plenum
Vertiv SmartAisle
135
Connecting piece
Kabelmanagement
74
Equipotential bonding bar
Systemzubehör
66
Alarm sensor
RMS Compact II
222
Connecting plate
Doublepro Rack
117
F
19" aluminum strip
Smaract
104
Connecting plate
Smaract
Doublepro Rack
116
Anti-tilt system
MIR2/DCM
49
Contact terminal
Systemzubehör
66
Fan units
Contact terminal
Smaract
107
Fiber optic cable
Kabelmanagement
Back plate
Smaract
111
Contact terminal
Doublepro Rack
117
Filling wall
Vertiv SmartAisle
139
Base
Smaract
105
CoolBlast
Lüftereinheiten
88, 90 - 94
Filter fan
Lüftereinheiten
95
Base frame
Kabelmanagement
Countersunk screw
Systemzubehör
64
Filter mat
MIR2/DCM
Base plate
MIR2/DCM
36
Cover
Kabelmanager
75, 77 - 79
Filter mat
Smaract
Baying connector
MIR2/DCM
43 - 44
19" blanking plate
Systemzubehör
Bolt clamp
19" breadboard profile
B
73, 75
109, 111
Fan rear panel
88
81 - 83
43
106
Cover plate
Kabelmanagement
74
19" filter slot
Lüftereinheiten
93
51
Cover screws
MIR2/DCM
44
Floor mounting
Smaract
107
Kabelmanagement
82
Cover strip
MIR2/DCM
45
Free-Standing SmartAisle
Vertiv SmartAisle
143
MIR2/DCM
40
Crossbeam
MIR2/DCM
43
Front filter intake
CoolBlast
94
Brush strip
MIR2/DCM
43, 79
Crosswiring
Kabelmanagement
75
Front panel
Systemzubehör
52
Bulkhead element
Vertiv SmartAisle
133
Customized SmartAisle
Vertiv SmartAisle
142
Front panel
CoolBlast
93
Busbar
Vertiv MPX
171
Cylinder screw
Systemzubehör
65
Front panel
Lüftereinheiten
96
19" front ventilation panel
Systemzubehör
52
C
D
C profile rail
Kabelmanagement
48
DCD
151
G
Cabinet lighting
Systemzubehör
59
DCM
20
Glass door
Smaract
103
Cable conduit
DCM Colocation
32
Depth profile sealing plate
DCM
49
Ground rail
Systemzubehör
66
Cable joint
Systemzubehör
56
Depth strut
Smaract
105
Ground rail
Smaract
107
67
19" desktop
Systemzubehör
58
Ground rail
Doublepro Rack
117
Cable management
Cable management rail
ConAct
123
Display module
Vertiv MPX
172
Grounding kit
ConAct
123
Cable management strip
Kabelmanagement
81
Display module
Vertiv MPH2
183
Grounding kit
MIR2/DCM
44
Cable manager
Kabelmanagement
76 - 80
208
Grounding kit
Doublepro Rack
117
Cable removal protection
MPX
3-phase distribution block
Knürr DIS Rack PDU
172
Distributor box
Systemzubehör
65
Cable removal protection
Knürr DIS Rack PDU
211
Knürr DIS Rack PDU
Cable retaining clip
Vertiv MPX
172
Document holder
Systemzubehör
59
Cable routing brace
Miracel 2/DCM
47
Door contact sensor
RMS Compact II
220
Cable routing bracket
Kabelmanagement
87
Door contact switch
Systemzubehör
66
I
Cable routing panel
Kabelmanagement
80
Doors
MIR2/DCM
34
IMS
Cable routing ring
Kabelmanagement
85 - 86
Double base
Switchtube
150
Infrared motion sensor
RMS Compact II
221
Cable spool
Kabelmanagement
87
Double base
Vertiv SmartAisle
141
Input module
MPX
169
Cable trough
kabelmanager
81 - 82
Double door
Vertiv SmartAisle
133
J
Cage nut
Systemzubehör
64
Double swivel caster
Smaract
106
Junction box
Systemzubehör
66
Cascading
Kabelmanager
80
Double swivel caster
Doublepro Rack
118
K
Center section
Kabelmanagement
73
DoublePro Rack
112
Keyboard drawer
Systemzubehör
58-59
Cold device connecting
cable
Knürr DIS Rack PDU
210
Colocation rack
DCM
131
Color-coding
Vertiv MPH2
185
236
190
H
19" drawer
Systemzubehör
Dust cover
CoolBlast
58 - 59
94
Handle
Systemzubehör
57
19" heavy duty base
Systemzubehör
56
Humidity sensor
RMS Compact II
220
224
Keyword
Product
Page
L
Keyword
Lifting eyes
MIR2/DCM
45
Quick release
Lifting eyes
Smaract
107
R
3 point lock
MIR2/DCM
32
Lock kit
MIR2/DCM
46
M
19" raised floor
Vertiv SmartAisle
132, 137
Mesh cable tray
Kabelmanagement
Mounting adapter
Smaract
Systemzubehör
104
62
Mounting bar
Kabelmanagement
82
Mounting bracket
Kabelmanagement
73
Mounting bracket
Doublepro Rack
Mounting kit
MIR2/DCM
62 - 63
Mounting kit
Smaract
62 - 63
Mounting kit
ConAct
62 - 63
118
Vertiv MPE
186
Vertiv MPH2
176
Vertiv MPX
164
MIR2/DCM
47
N
Vertiv Nform
223
Output module
Oval head screw
Vertiv MPX
Systemzubehör
168, 170
64 - 65
P
Partitioning wall
MIR2/DCM
32, 38
PDU bracket
MIR2/DCM
48
PDU mounting kit
Kabelmanagement
48
Plinth
MIR2/DCM
Plinth
Smaract
Plinth cover with cable entry Smaract
37
106
106
19" plug-in unit
PowerTrans2
161
Plug connector
Knürr DIS Rack PDU
209
Power cable
Knürr DIS Rack PDU
208 - 209
PowerTrans2
94
Top cover
MIR2/DCM
218
Top cover
IP55
Roof cabling
70
Top cover
Smaract
Roof element
Vertiv SmartAisle
134 - 135, 138,
140
Top cover
Kabelmanagement
72
Rotating frame
MIR2/DCM
Top guard strip
Vertiv SmartAisle
140
Top trim
Vertiv SmartAisle
140
Transition piece
Kabelmanagement
73
Velcro strip
Kabelmanagement
85 - 86
Ventilation unit
Smaract
104
Ventilation unit
ConAct
123
19" vertical strip
ConAct
123
Vibration sensor
RMS Compact II
221
Wall mount
Smaract
107
Wall mounted enclosure
ConAct
119
RPC2
42
173
S
Seal kit
Vertiv SmartAisle
Sealing frame
IP55
Sensor box
Vertiv SmartAisle
140
18
138
Sensor cable
RMS Compact II
221
Sensor extension cable
RMS Compact II
221
Sensors
Vertiv MPX
171, 183
Sensors
Vertiv MPH2
171, 183
Series terminal boxes
Systemzubehör
19" sheet steel profile
Smaract
19" shelf
Systemzubehör
57
Shim
Vertiv SmartAisle
138
Side section
MIR2/DCM
56 - 57
Side section screw connection
MIR2/DCM
44
Sliding door
Vertiv SmartAisle
131
Slot-in runner
Systemzubehör
Slot-in runner
Switchtube
Smaract
66
104
19, 35, 44
19
105
V
W
53 - 54
147
97
SmartAisle
O
220
CoolBlast
Mechanical lock
Mounting aid
96
RMS Compact II
Replacement filter
84
41
Lüftereinheiten
Temperature sensor
65
83 - 85
215 - 217
Temperature module
96
Kabelmanagement
MIR2/DCM
54 - 56
Lüftereinheiten
Kabelmanagement
MLR5000
40 - 41
Systemzubehör
Maneuvering handle
217
MIR2/DCM
Thermostat
Maneuvering bar
215 - 217
Tape measure
Tensiloc nut
RMS Compact II
MLR3000
Systemzubehör
44
116
82
MLR1000
MIR2/DCM
109
210
4
Page
Smaract
Knürr DIS Rack PDU
Miracel 2
Product
T
Doublepro Rack
Kabelmanagement
74
Keyword
Rear panel
Mains cable
Multifunctional strut
Page
Rear wall
M5 threaded plate
Mounting adapter
Product
Q
124
Smoke detector
RMS Compact II
221
Socket connector
Knürr DIS Rack PDU
209
Spacer bolts
MIR2/DCM
45
Speedmount kit
Vertiv MPH2
185
Spring nut
Systemzubehör
64
Stacking kit
Smaract
107
Support bracket, static
MIR2/DCM
46
Switch rack
Vertiv SmartAisle
149
Switch tube
Vertiv SmartAisle
144
158
237
VERTIV™
238
Vertiv™ – For greater Energy Efficiency in your IT Environment
Really reliable availability of business-critical
networks requires a network
infrastructure installation you can
fully depend on, administration and
continuous support.
This in turn depends on the power
supply and cooling infrastructure
supporting these systems and is based on the
following key components:
– Business-critical power supply
– Business-critical cooling
– Rack and enclosure systems
– Monitoring and management
Vertiv has developed new power-supply-,
cooling-, rack- and enclosure systems, as
well as monitoring solutions which further
support uninterrupted availability – and offer
real added value that goes well beyond the
sum of the individual solutions.
Our exceptionally reliable and com­
prehensive solutions are tailored to your
requirements – thereby providing the benefit
of optimized strategic and operational
efficiency enhanced reliability, higher
flexibility and lower overall operating costs.
With our solutions we provide unsurpassed
adaptability, individualization and the ability
to integrate into the most diverse products
and services.
Drawing on the combined use of our
knowledge, our experience and our
resources, we deliver a demand-driven
solution from a single source.
We acquire extensive knowledge of the
challenges you face and are in a position to
meet your requirements.
The result: an infrastructure that
stays abreast of current and future
requirements.
– Proactive maintenance
239
VertivCo.com | Vertiv Limited, George Curl Way, Southampton, SO18 2RY, VAT Number: GB188146827
© 2016 Vertiv Co. All rights reserved. Vertiv™, the Vertiv logo are trademarks or registered trademarks of Vertiv Co. All other names and logos referred to are trade names, trademarks or registered trademarks of their respective owners. While every precaution has
been taken to ensure accuracy and completeness herein, Vertiv Co. assumes no responsibility, and disclaims all liability, for damages resulting from use of this information or for any errors or omissions. Specifications are subject to change without notice.
MKA4LOUKIT Rev.1/1152
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement