Strahman Wash Down Equipment - Hose Stations and Mixing Units

Strahman Wash Down Equipment - Hose Stations and Mixing Units
Wash Down Equipment
January 2013
Hose Stations and Mixing Units
Strahman Valves, Inc. Corporate Profile
Headquartered in Bethlehem, Pennsylvania, USA, Strahman Valves is a worldwide leader in the manufacture of high-quality: Wash
Down Equipment, custom Industrial Valve products and Pre-Rinse Equipment. Since its inception in 1921, the Company has earned a
reputation for products that provide superior performance, innovative solutions to complex problems and long-lasting reliability. Strahman
has become the standard for numerous industries including the chemical, petrochemical, polymer, biotechnology, pharmaceutical, food
processing, food serving, beverage, dairy and mining, as well as the pulp and paper industry.
With facilities in the United States, France and Germany, coupled with an extensive network of distributors and agents on every
continent, Strahman is well positioned to serve the needs of its customers throughout the world. Our trained agents and distributors
provide local service and support to customers worldwide whenever required. With ISO 9001:2000 certification at our production
facilities, Strahman Valves has the capability to design, manufacture, assemble and test a wide variety of high quality sophisticated
valves and wash down equipment.
Wash Down Equipment
Strahman’s entry into the wash down equipment market began with its involvement with the Dairy Industry. Recognizing a need for a
high-performing unit that could distribute hot water for facility clean up, Strahman engineers developed the first steam and cold water
mixing unit. This led to the development of mixing units that distribute hot and cold water as well as thermostatically controlled mixing
units. Having gained a reputation in this area, Strahman then focused its efforts to develop a complete line of industrial spray nozzles and
hoses. Today, Strahman’s Wash Down Equipment has become the standard in virtually every industry requiring precise temperature control,
long-lasting and trouble-free wash down systems.
Strahman’s current product line includes single line hose bibs, mixing units for hot and cold water, steam and cold water, stainless steel
cabinets, pre-rinse spray nozzles, a wide array of industrial spray nozzles, industrial hoses, FDA approved hoses, hose racks, hose reels,
stainless steel jacketed transfer hoses and fittings, PTFE lined hoses, and special application hoses.
Industrial Valves
Strahman pioneered the free-flowing, non-clogging piston tank bottom valve and established itself as a worldwide leader of sampling valves
and sampling systems. Today, we offer a full range of both cast and fabricated valves ranging from -330°F/-200°C to over 1,500°F/815°C
and pressures ranging from vacuum to 9,000 psi/630 bar. Materials of construction include carbon steel, stainless steel (316, 316L, 316 Ti,
304, 304L, 2205 (Duplex), 347, Alloy 20), Hastelloy B, Hastelloy C, Monel, Inconel, Titanium and Zirconium. Strahman technology
includes metal to metal seals as well as seatless sealing technologies.
Other valve products include Spray Rinse Valves for reactors, Piston and Disc Diverter Valves, Rotating, Sliding, Spreading
and Non-spreading Line Blinds, Cartridge Ball Valves, Rising and Lowering Disc Valves, Metal Seated Butterfly Valves, Disc
and Piston In-Line Valves and Pipe Valve assemblies.
Table of Contents
Introduction
Part I - Steam and Cold Water Mixing Units
M-5000TG and M-5700TG Wall-Mounted Series
2-4
NEW - M-5000TG Wall-Mounted Low Flow Series
M-5000TS Thermostatically Controlled Mixing Unit
M-144TG Safety Unit
5-6
7-8
9-10
Part II - Hot and Cold Water Mixing Units
M-159TG and M-750TG Mixing Units-Hose Stations
M-200TS Thermostatically Controlled Mixing Unit
11-12
13-14
Part III - Hot or Cold Water Wall-Mounted Units
M-156N and M-756 Wall-Mounted Hose Station
M-358 and M-758 Series
M-120 Wall-Mounted Hose Station
15
16
17
Part IV - Cabinet, Recessed and Pedestal Series
CEC-1000 Series
Recessed Series
M-200TS Recessed Wall Box
Multiple Series with Airline and Pedestal Series
18
19
20
21
Part IV - Spray Nozzles
M-70 Series and S-70 Series
Mini M-70 Series and NEW Mini S-70 Series
F-90 and S-90 Series
S-80 Series
E-76 and S-76 Series
Hydro-Pro® 150
Hydro-Pro® 150 QC
Pre-Rinse Spray Nozzles Kwik Clean 3® & Vari-Spray™
22
23
24
24
25
26
27
28-29
Part V - Hoses, Hose Reels and Adapters
Strahman Hose Assemblies
Standard Hose Reel
Hi-Sanitary Hose Reel
Swivel-Pro™
Hose Accessories and Adapters
30-32
33
34
35
36
Part VI - Valves
Soft Seal Piston Valve
Ball Valve
WARRANTY and RETURNY POLICY
37
37
Introduction
Strahman began providing the dairy and food processing industries with durable, reliable mixing units and
hose stations more than eight decades ago. Today, this sturdy equipment can be found in manufacturing plants
and processing industries around the world including food, beverage, pharmaceutical, biotechnology and others
where fast and effective cleanup is required.
As a single unit, Strahman’s mixing unit-hose stations produce wash water from the following sources:

Instant hot water from steam and cold water (M-5000/M-5700 Series)

Blended hot and cold water (M-159/M-750 Series)

Hot or cold water (M-156N/M-756/M-358 Series)
Standard Strahman mixing units are constructed from bronze with internal parts of stainless steel.
Most models are also available made entirely of stainless steel. Stainless steel mixing units and hose
stations will not discolor, are easy to clean, and are ideal for use in special water applications,
including those using ionized or purified water.
Strahman makes mixing units in four practical types to meet your particular needs:

Wall-mounted

Recessed

Pedestal

Cabinet
Most Strahman mixing units-hose stations come with a temperature-indicating gauge as an option.
Temperature-indicating units include an accurate dial-type gauge that displays, in both Celcius and
Fahrenheit, the wash water’s exact temperature; users can easily adjust the temperature by turning
the unit’s valves.
All Strahman mixing units are available with:

Stainless steel hose rack

50 feet of high pressure water hose; any length longer than 50 feet,
please notify your customer service representative at Strahman.

Automatic water saver spray nozzle
All Strahman units are exceptionally durable, economical, require little
maintenance and mount easily anywhere steam and/or water lines are available.

Maximum recommended operating temperature for Strahman
mixing units-hose stations, and all Strahman products:
200°F/93°C

Maximum working pressure:
150 psi
Several hose lengths, hose types and nozzle options are available. Most mixing units are
available with globe or angle valves. Consult your Strahman sales representative for details.
Note: Also available with ball valves.
IMPORTANT PRODUCT INFORMATION
READ BEFORE PURCHASING STRAHMAN WASH DOWN PRODUCTS
Steam and Cold Water Mixing Units
It is recommended that a strainer and steam trap be used in conjunction with all of our steam mixing units.
Foreign deposits in supply lines can affect ball check durability.
Proper steam and water treatment is recommended to ensure proper perforamance and durability
Strahman steam mixing units are designed to be operated with a spray nozzle and 5/8” ID hose at the outlet commection.
HARD PIPING OF THE OUTLET IS NOT RECOMMENDED.
Under no circumstance should a steam mixing unit be modified, ESPECIALLY TO OVER-RIDE SAFETY FEATURES.
Injury of malfunction may result from such actions.
Units should be shut off when not being used for extended periods of time (overnight or longer).
Do not open supply valves until unit, hose, and nozzle installation is completed.
Hot and Cold Water Mixing Units
Foreign deposits in supply lines can affect ball check durability.
Hot and cold water supply pressures should be within 20 psi.
Units should be shut off when not being used for extended periods of time.
Strahman Hoses
Do not overtighten hose connection: 50 ft-lbs maximum. Do not use a pipe wrench to tighten any fittings or nuts.
Hoses should be inspected on a regular basis.
When removing protective wrap, be sure not to cut the outer cover of the hose.
Be sure to wear proper personal protection when operating any wash down equipment.
1
Steam and Cold Water Mixing Units
M-5000TG Bronze Wall-Mounted Series
M-5700TG Stainless Steel Wall-Mounted Series
This unit produces hot water instantly from a steady supply of steam and cold water.
All mixing units-hose stations in the M-5000TG/M-5700TG Series are equipped
with a dial-type gauge that indicates the wash water’s exact temperature. Users can easily
regulate the temperature by turning the unit’s steam and cold water valves. As an added
safety measure, these units shut off their steam source automatically if the cold water
supply falls below 50 psi for any reason. This prevents hazardous steam from exiting
the unit and causing steam burns.
Our Temperature Indicating (TG) models (M-5000TG and M-5700TG) are equipped
with a dial-type gauge that accurately indicates the wash water’s temperature. They also
feature a specially designed blending chamber to thoroughly blend steam and cold water.
Please review the chart below before purchasing
an M-5000TG/M-5700TG unit.
REQUIRED STEAM
MODEL NUMBER
REQUIRED
STEAM
PRESSURE*
REQUIRED
WATER
PRESSURE*
GPM
M-5000 L**
80-95 lbs.
50-80 lbs.
5-7
M-5000 M
96-130 lbs.
50-80 lbs.
4½-6
M-5000 H
131-150 lbs.
50-80 lbs.
4½-6
Shown: Bronze M-5000TG; shown with premium
hose assembly and M-70 Series nozzle.
*Steam pressure required at installation site to ensure proper operation of mixing unit.
**Standard unit supplied.
Wall-Mounted Series for Steam and Cold Water
Strahman’s wall-mounted, temperature-indicating, instant hot water mixing
unit is designed to mount one inch away from the walls for easy cleanup.
Units come complete with spacers, complete mounting instructions and
⅜” studs for easy mounting.
Specifications

Maximum water temperature:
200°F/93°C

Maximum working pressure:
150 psi steam
Caution: If overheating of water should occur due to restrictions in lines
or pressure fluctuations, make adjustment to steam valve to lower temperature.
REFER TO PAGE 1 FOR IMPORTANT ADDITIONAL INFORMATION.
Shown: Stainless steel M-5700TG; shown with
premium hose assembly and S-70 Series nozzle.
2
Steam and Cold Water Mixing Units
M-5000TG and M-5700TG Wall-Mounted Series Parts Listing
PARTS
70-90
FT-LB
Torque
PART PART
NO.
70-90
FT-LB
Torque
“I’ve used Strahman equipment for
the past 21 years. Strahman stands by
their equipment, providing customer
service and technical assistance we
can count on.”
Mike, Associate Director
Pharmaceutical Industry
M-5700
MATERIAL
M-5000
MATERIAL
1
BODY (includes parts 6 and 7)
SST 316
BRONZE
2
HOSE RACK CAP SCREW
(not shown)
SST 304
STAINLESS STEEL
3
HOSE RACK LOCK WASHER
(not shown)
SST 410
STAINLESS STEEL
4
HOSE RACK CONNECTOR
(not shown)
SST 303
BRASS
5
STEAM POPPET (L, M, H)
SST 303
STAINLESS STEEL
6
STEAM JET
SST 416
STAINLESS STEEL
7
POPPET SEAT
SST 304
BRONZE
8
HOSE RACK (not shown)
SST 302
STAINLESS STEEL
10
SPACER (not shown)
SST 416
STAINLESS STEEL
11
WALL PLATE (not shown)
SST 304
BRASS
12
BALL CHECK UNION NUT
SST 304
BRASS
13†
BALL CHECK VALVES
(includes part 36)
SST 303
BRASS/STAINLESS STEEL
ALUMINUM SILICONE BRONZE
18
WATER CHAMBER
SST 303
STAINLESS STEEL
19
WATER CHAMBER HOUSING
(includes part 35)
SST 304
BRASS
20
POPPET GUIDE
SST 304
BRASS
21
POPPET GUIDE NUT
SST 303
BRASS
22
BODY NUT
SST 303
BRONZE
25
SET SCREW
SST 304
STAINLESS STEEL
26
POPPET SPRING
SST 302
STAINLESS STEEL
27
GUIDE EXTENSION
SST 416
STAINLESS STEEL
28
PUSHER
SST 303
STAINLESS STEEL
31**
TEMP GAUGE
PLATED BRASS
CHROME
32
BLENDING CHAMBER
SST
Bronze (269)
35
“0” SEALING RING FOR
WATER CHAMBER HOUSING
EPMD
E5 15-80-2Q75
36
BALL CHECK GASKET
COPPER,
PTFE COATED
COPPER
Sold as a complete unit.
**Temperature gauge: 40-120°C/100-250°F.
†
3
Steam and Cold Water Mixing Units
M-5000TG and M-5700TG Wall-Mounted Series Dimensions
See pg. 34 Globe
Valve for Torque
70-90 FT-LB
Torque
Note: Front view shown with globe valves.
M-5000TG and M-5700TG Wall-Mounted Series Flow Chart
All M-5000 Units
70 psig
M-5000 Low Flow
ONLY
60 psig
50 psig
40 psig
M-5000LF ONLY
*Minimum pressures shown in heavy black line.
HOW TO READ CHART: To get GPM flow from the unit, use (water pressure PSIG) indication above.
From 50 PSIG water go to first curve and move to bottom of the chart which shows GPM. This would
indicate that the flow would be 7 GPM.
To get the temperature of water through the unit, 50 PSIG water pressure and move to 80 PSIG steam
pressure where lines intersect, move to bottom of chart (temperature rise F).
To read the temperature rise correction chart, use the inlet water temperature (50), move to bottom
of chart and compute (.98). Multiply this times the temperature rise F as shown above.
Note: To ensure proper M-5000 performance, we recommend that a standard Strahman Hose Assembly and spray nozzle be used.
To ensure proper M-5000 Low Flow performance, we recommend that a standard Strahman Hose Assembly and low-flow spray nozzle be used.
4
Steam and Cold Water Mixing Units
NEW! M-5000TG Bronze Wall-Mounted LOW FLOW Series
It may look like a standard M-5000TG mixing unit, but its anything but standard!
Benefit from up to 20% savings in water, sewage and energy costs!
Get the same superior product quality and highly effective performance,
along with the significant utility savings.
This unit produces hot water instantly from a steady supply of steam and cold water.
All mixing units-hose stations in the M-5000TG Low Flow Series are equipped
with a dial-type gauge that indicates the wash water’s exact temperature. Users can
easily regulate the temperature by turning the unit’s steam and cold water valves.
As an added safety measure, these units shut off their steam source automatically
if the cold water supply falls below 20 psi for any reason. This prevents hazardous
steam from exiting the unit and causing steam burns.
NEW!
Our Temperature Indicating (TG) models (M-5000TG Low Flow) is equipped
with a dial-type gauge that accurately indicates the wash water’s temperature.
They also feature a specially designed blending chamber to thoroughly blend
steam and cold water.
Please review the chart below before purchasing
an M-5000TG Low Flow unit.
Shown: Bronze M-5000TG Low flow
REQUIRED STEAM
MODEL NUMBER
REQUIRED
STEAM
PRESSURE*
REQUIRED
WATER
PRESSURE*
GPM
M-5000 Low Flow
40-150 lbs.
40-80 lbs.
3¼-6
Strahman cannot guarantee the performance of this product
unless it is purchased with a Strahman A-X Premium Wrapped
or Extruded Hose Assembly and Strahman M-70 Low Flow or
HP-150 Low Flow Series Spray Nozzle.
The M-5000 Low Flow unit is available in bronze.
Flow Rates
M-5000TG vs. M-5000TG Low Flow
13 13
Wall-Mounted Series for Steam and Cold Water
Specifications
12 12
11 11
10 10
FLOW RATE FLOW RATE (GPM)
Strahman’s wall-mounted, temperature-indicating, instant hot water
mixing unit is designed to mount one inch away from the walls for
easy cleanup. Units come complete with spacers, complete mounting
instructions and ⅜” studs for easy mounting.
99 M-­‐5000 M-­‐5000LF 88 77 
Maximum water temperature:
200°F/93°C
66 
Maximum working pressure:
150 psi steam
55 95 95
90 90
85 85
80 80
75 75
70 70
65 65
60 60
55 55
50 50
45 45
40 40
35 35
30 30
PRESSURE (PSI)
Caution: If overheating of water should occur due to restrictions in lines
or pressure fluctuations, make adjustment to steam valve to lower temperature.
Please see page 4 for the M-5000 Flow Chart.
M-5000TG
M-5000TG Low Flow
Flow ratings are for mixing units without nozzles.
REFER TO PAGE 1 FOR IMPORTANT ADDITIONAL INFORMATION.
5
Stainless Steel Units
8
7
6
4
5
2
3
1
NEW! M-5000TG Wall-Mounted Low Flow Series Parts Listing
F
10.00
FULLY OPEN
2.44
E
13
70-90 FT-LB
Torque
31
6
3/4-14 NPT
12
36
3/4-14 NPT
3
12
70-90 FT-LBS
TORQUE
D
32
25
21
20
33
27
26
28
5
7
25-30 FT-LBS
TORQUE
18
15
35
8.25
APPROX.
22
50-60 FT-LBS
TORQUE
20.94
APPROX.
C
9 APPROX.
2.66
1
2.66
5.31
6
25-30 FT-LBS
TORQUE
B
3/4-14 NPT
11 APPROX.
PARTS
PART PART
NO.
M-5000 Low Flow
MATERIAL
Q.A.
TITLE:
A
ENG APPR.
COMMENTS:
MATERIAL
NEXT ASSY
USED ON
APPLICATION
FINISH
M-5000 Low Flow
MATERIAL
20988A
C
EXPLODED
SIZE DWG. NO.
REV
SCALE: 1:2.5WEIGHT: 22.7
DO NOT SCALE DRAWING
SHEET 1 OF 1
2
HOSE RACK CAP SCREW
(not shown)
STAINLESS STEEL
20
POPPET GUIDE
BRASS
3
HOSE RACK LOCK WASHER
(not shown)
STAINLESS STEEL
21
POPPET GUIDE NUT
BRASS
4
HOSE RACK CONNECTOR
(not shown)
BRASS
22
BODY NUT
BRONZE
5
STEAM POPPET
STAINLESS STEEL
25
POPPET STOP
STAINLESS STEEL
6
5
BRONZE
4
3
18
MFG APPR.
BODY with integral water
chamber housing and
blending section
(includes parts 6 and 7)
WATER CHAMBER
2
1
STAINLESS STEEL
6
STEAM JET
STAINLESS STEEL
26
GUIDE HOUSING
STAINLESS STEEL
7
POPPET SEAT
BRONZE
27
GUIDE EXTENSION
STAINLESS STEEL
8
HOSE RACK (not shown)
STAINLESS STEEL
28
PUSHER
STAINLESS STEEL
10
SPACER (not shown)
STAINLESS STEEL
31**
TEMP GAUGE
STAINLESS STEEL
11
WALL PLATE (not shown)
BRASS
32
JAM NUT
STAINLESS STEEL
12
BALL CHECK UNION NUT
BRASS
33
O-RING POPPET STOP
EPDM
13†
BALL CHECK VALVES
(includes part 36)
BRASS/STAINLESS STEEL
ALUMINUM SILICONE BRONZE
35
LOW FLOW O-RING
EPDM
15
RETAINING RING
STAINLESS STEEL
36
BALL CHECK GASKET
COPPER
Sold as a complete unit.
**Temperature gauge: 40-120°C/100-250°F.
6
INTERPRET GEOMETRIC
TOLERANCING PER:
DATE
CHECKED
1
7
†
NAME
DRAWN
PART PART
NO.
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
<INSERT COMPANY NAME HERE>. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
<INSERT COMPANY NAME HERE> IS
PROHIBITED.
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
BEND
ANGULAR: MACH
TWO PLACE DECIMAL
THREE PLACE DECIMAL
Steam and Cold Water Mixing Units
M-5000TS Thermostatically Controlled Mixing Unit
The Model M-5000TS lets you combine steam and cold water to produce hot
water efficiently — without the safety concerns normally associated with steam
use. Allowing for a maximum water temperature of 200°F, the automatic unit
includes an easy-to-use temperature gauge that senses even slight variations to
monitor water temperature accurately. The M-5000TS unit’s thermostatically
designed safety shut-off valve prevents the unit from overheating, and the
thermostat is hydraulically formed, liquid-filled bellows.
Strahman also offers its new M-5000TS Conversion Kit, which will retrofit
the original M-5000 mixing unit to provide the same operating ranges and
temperatures, as well as a thermostat that prevents temperature fluctuations.
Backed by Strahman’s one-year warranty.
Specifications

Maximum water temperature:
200°F/93°C

Minimum discharge water
temperature:
100°F/38°C

Maximum working pressure:
1 50 psi steam,
80 psi cold water

Minimum working pressure:
8 0 psi steam,
50 psi cold water

Thermostatically designed safety shut-off
prevents unit from overheating

Unit automatically compensates for water pressure
fluctuations to maintain desired water temperature

Thermostat is hydraulically formed,
liquid-filled bellows

Removable parts for easy cleanup and inspection

Unit and conversion kit are both easily installed
Shown: Bronze M-5000TS; shown with premium
hose assembly and M-70 Series nozzle

All bronze body with bronze, brass and stainless
steel internal parts.
Caution: If overheating of water should occur due to restrictions in lines
or pressure fluctuations, make adjustment to steam valve to lower temperature.
Please see page 4 for the M-5000TS Flow Chart.
REFER TO PAGE 1 FOR IMPORTANT ADDITIONAL INFORMATION.
7
Steam and Cold Water Mixing Units
M-5000TS Thermostatically Controlled Mixing Unit Dimensions and Parts Listing
6”
56
70-90 FT-LB
Torque
21
17
16
7
18
BALL CHECK GASKET
COPPER
2
O-RING WATER CHAMBER HOUSING
EPDM
1
4
WATER CHAMBER
SST
1
5
STEAM JET
SST
1
SST
1
2
EPDM
1
14A
9
2
3
ACTUATOR SLEEVE
16A
8
50
20
9
SPRING
SST
2
10
O-RING THERMOSTAT HOUSING
EPDM
1
11
O-RING STEAM ADJUSTER
EPDM
1
12
O-RING POPPET STOP
EPDM
1
13
POPPET SPRING
SST
1
14
GUIDE EXTENSION
SST
1
14A
¾” HEX NIPPLE
BRASS
1
15
PUSHER
SST
1
16
POPPET
SST
1
16A
ACTUATOR PIN
SST
1
17
SEAT
SST
1
44
18
STEAM INJECTOR
SST
1
10
19
DIFFUSER SCREEN
SST
1
POPPET SEAT TOOL
SST
1
19
39
11
24
UNILEVER SHOWN
IN THE “OFF POSITION
46
26
22
2
O-RING BLENDING CHAMBER
4
5
BRASS/SST
BALL CHECK VALVE ASSY.
7
12
15
MATERIAL QUANTITY
1
8
30
14
PART NO. PART
1
3
13
PARTS
15 FT-LB Max
Torque
20
POPPET TOOL
SST
1
TUBE ASSEMBLY
COPPER
1
21
BALL VALVE
BRONZE/SST
2
22
HANDLE SCREW
STEEL
1
24
THERMOSTAT HOSUING
BRASS
1
26
THERMOSTAT ADJUSTER
SST
1
30
LOCKNUT
SST
1
39
TS BODY
BRONZE
1
44
THERMOSTAT
BRASS
1
46
CONTROL KNOB
PLASTIC
1
50
SUPPORT PLATE
SST
1
56
UNILEVER
SST
1
MP-88 Mounting Plate shown in drawing is not standard with the M-5000TS unit.
The MP-88 must be ordered separately.
8
Steam and Cold Water Mixing Units
M-144TG Safety Unit
The M-144TG Safety Unit is designed to blend steam and cold water
in any desired proportion; the unit features a safety steam shut-off which
prohibits passing live steam. User adjustable with a factory-set maximum
temperature, this unit is equipped with dial type gauge that indicates the
exact wash temperature in both Celsius and Fahrenheit. For maximum
efficiency, it is recommended that a Strahman hose assembly (with shutoff nozzle) be used in conjunction with this unit. Hard piping from the
unit discharge, or use with an open-ended hose, is not recommended.
Our Temperature Indicating (TG) models (M-144TG) are equipped
with a dial-type gauge that accurately indicates the wash water’s
temperature. They also feature a specially designed blending
chamber to thoroughly blend steam and cold water.
Specifications

Minimum working pressure
20 psi/1.4 bar steam

Maximum design pressure:
150 psi/10.3 bar steam

Maximum operating pressure:
8 0 psi/5.5 bar steam
80 psi/5.5 bar water

Factory-set maximum
temperature of:
200°F/93°C

Safety steam shut-off

For proper operation, water pressure
should not exceed steam pressure
The new safety unit is backed with more than 90 years
of Wash Down Equipment manufacturing expertise.
REFER TO PAGE 1 FOR IMPORTANT ADDITIONAL INFORMATION.
Shown: Bronze M-144TG with globe valves; shown
with premium hose assembly and M-70 Series nozzle
9
Steam and Cold Water Mixing Units
M-144TG Safety Unit Parts Listing
PARTS
70-90 FT-LB
Torque
70-90 FT-LB
Torque
PART NO. DESCRIPTION
MATERIAL
1
MAIN BODY
BRONZE
2
HOSE RACK CAP SCREW
SST
3
HOSE RACK LOCK WASHER
SST
4
HOSE RACK CONNECTOR
BRASS
5
GLOBE VALVE
BRONZE
8
HOSE RACK ASSEMBLY
SST
10
SPACER
SST
11
WALL PLATE
BRASS
12
BALL CHECK UNION NUT
BRASS
13
BALL CHECK VALVE
BRASS/SST
17
THERMOSTAT HOUSING
BRONZE
21
UNION TAIL PIECE
BRONZE
22
INLET UNION NUT
BRONZE
31
TEMPERATURE GAUGE
CHROME
36
BALL CHECK GASKET
COPPER
M-144TG Performance
M-144 Safety (200ºF cut-off),
25’ of 5/8” Hose, HP-150 Nozzle
PSI STEAM PSI WATER
OUTPUT GPM
20
20 to 30
3.25 to 4.25
30
20 to 35
4.00 to 5.25
40
20 to 45
4.00 to 6.25
50
25 to 50
4.00 to 6.25
60
30 to 65
5.00 to 7.00
70
40 to 75
5.50 to 7.50
80
45 to 80
6.00 to 8.00
*Water and steam pressures must both be within 20 psi
of each other for optimal performance.
10
Hot and Cold Water Mixing Units
M-159 and M-159TG Bronze Mixing Units-Hose Stations
M-750 and M-750TG Stainless Steel Mixing Units-Hose Stations
Strahman’s mixing units-hose stations for hot and cold water are designed
to thoroughly mix hot and cold water in any desired proportion. They are
available in both standard bronze models (M-159) and models made
completely of stainless steel (M-750).
Our Temperature Indicating (TG) models (M-159TG and M-750TG)
are equipped with a dial-type gauge that accurately indicates the wash
water’s temperature. They also feature a specially designed blending
chamber to thoroughly blend hot and cold water.
Also available: Standard M-159 and M-750 without temperature gauge.
Units available with ball valves.
Wall-Mounted Series for Hot and Cold Water
Wall-mounted unit is designed to mount one inch away from the walls.
Specifications

Maximum water temperature:
200°F/93°C

Maximum working pressure:
150 psi
Shown: Bronze M-159TG with globe valves;
shown with premium hose assembly and M-70 Series nozzle

Operable on normal city water pressure (see flow chart, page 10)
NOTE: Intended for cold and hot water use only.
REFER TO PAGE 1 FOR IMPORTANT ADDITIONAL INFORMATION.
See pg. 34 Globe
Valve for Torque
70-90 FT-LB
Torque
Shown: Stainless steel M-750TG with globe valves;
shown with premium hose assembly and S-70 Series nozzle
11
Hot and Cold Water Mixing Units
M-159TG and M-750TG Mixing Units-Hose Stations Parts Listing
PARTS
See pg. 34 Globe
Valve for Torque
70-90 FT-LB
Torque
PART NO.
PART
1
BODY
2
CAP SCREW
3
LOCK WASHER
4
HOSE RACK CONNECTOR
8
HOSE RACK
10
SPACER
11
WALL PLATE
12
UNION NUT
13
CHECK VALVE
31
TEMPERATURE GAUGE
32
BLENDING CHAMBER
36
CHECK VALVE GASKET
37
INLET UNION NUT
38
UNION TAIL PIECE
39
UNION GASKET
Order by name and number.
*Sold as a complete unit.
M-159TG and M-750TG Mixing Units-Hose Stations Flow Chart
Example: Available Pressure 50 PSIG, 60 PSIG
At 50 PSIG, use “0” PSIG curve to get 7 GPM total flow.
At 60 PSIG, use “0” PSIG curve to get 7.5 GPM total flow.
To get hot water GPM flow through unit:
1. 50 PSIG hot water
50 PSIG cold water
➞
3.5 GPM hot water
3.5 GPM cold water
➞
7 GPM total flow
2. 50 PSIG hot water
60 PSIG cold water
➞
2.75 GPM hot water
4.25 GPM cold water
➞
7 GPM total flow
3. 60 PSIG hot water
50 PSIG cold water
➞
4.5 GPM hot water
3.0 GPM cold water
➞
7.5 GPM total flow
Instructions for Computing Above:
To get the GPM flow from the unit, use the hot water pressure PSIG indication
shown above. From 50 PSIG hot water, go to the “0” PSIG curve and move to
the bottom of the chart, which shows maximum water flow GPM. This would
indicate a flow of 7 GPM.
To get the GPM of hot water being used through the unit, go to 50 PSIG hot
water pressure and move to 50 PSIG cold water pressure. Drop to maximum
water flow GPM. This would indicate 3.5 hot water GPM, 3.5 cold water GPM
for a total of 7 GPM. Keep in mind, if you increase the cold water pressure,
you decrease the hot water GPMs.
12
Hot and Cold Water Mixing Units
M-200TS Thermostatically Controlled Mixing Unit
The Model M-200TS features rugged construction and superb quality
for superior thermostatic control. The unit’s accurate and solid, liquid-filled
thermostat allows you to set the exact output water temperature desired —
from 80°F to 160°F. With its durable body construction (bronze), the M-200TS
valve features replaceable components that resist corrosion. Both the piston and
liner are made of stainless steel material for long-lasting reliability. The unit also
includes an integral shut-off valve. Backed by a one-year warranty.This unit is
available in bronze or chrome-plated.
Specifications

Maximum water temperature
160°F/71°C
Minimum pressure required
1 0 psi hot, 10 psi cold
Balanced pressure
Maximum working pressure
125 psi
Maintains temperature to
+/-3°F
½” low flow unit
5-7 gpm
¾” high flow unit
10-12 gpm

Single lever On/Off operation

Precise temperature control from
80°F/27°C to 160°F/71°C
Shown (top left): M-200TS in bronze; shown
with premium hose assembly and M-70 Series nozzle.
Unit also available in chrome-plated.

Adjustable temperature limit stop
for maximum safety

Is linear in its expansion and exerts the highest possible
operating force directly to the valve piston

Must have a minimum of 15°F differential between
hot and cold inlet and outlet set temperature
NOTE: Supply hot water must not exceed 180°F.
NOTE: Intended for cold and hot water use only.
35
30
25
GH

Is hydraulically formed, liquid-filled bellows
50
45
40
20
HI

Senses slight pressure fluctuations
60
2"
Thermostat
FLOW CAPACITIES SINGLE STAGE
70
1/

Senses and compensates for temperature or pressure
fluctuations (up to a 50% drop in inlet supply pressure)
PRESSURE DROP, POUNDS PER SQUARE INCH

Replaceable components facilitate servicing
15
10
9
8
7
6
5
1
2
3
4
5
6
7
8 9
10
15
20
30
35
FLOW OF WATER, GALLONS PER MINUTE
REFER TO PAGE 1 FOR IMPORTANT ADDITIONAL INFORMATION.
13
Hot and Cold Water Mixing Units
M-200TS Thermostatically Controlled Mixing Unit Parts Listing
15 FT-LB Max
Torque
70-90 FT-LB
Torque
PARTS
PART NO.
PART
MATERIAL
QUANTITY
1
UNILEVER
SST
1
2
BALL VALVE
SST
2
3
CHECK VALVE
CHROME-PLATED BRASS w/ SST INTERIOR
2
4
UNION NUT
CHROME-PLATED BRASS
2
5
GASKET
COPPER
2
6
CHECK VALVE ADAPTER
CHROME-PLATED BRASS
2
7
MIXING VALVE
CHROME-PLATED BRONZE w/ SST INTERIOR
1
8
CONTROL KNOB
NYLON
1
9
STREET ELBOW
SST
2
10
U-BOLT
SST
1
11
#10 NUT
SST
2
12
MOUNTING PLATE
SST
1
13
NIPPLE
CHROME-PLATED BRASS OR SST
1
14
TEMPERATURE GAUGE
SST
1
15
TEE
CHROME-PLATED BRASS OR SST
1
16*
HOSE ASSEMBLY “Y”
CHROME-PLATED FITTINGS
1
17
SWIVEL-PRO ADAPTER
STAINLESS STEEL
1
18
HYDRO-PRO 150® NOZZLE
SST/BRASS/NYLON
1
Note: Drawing shown with optional “ergonomic package” Hydro-Pro 150® spray nozzle and Swivel-Pro adapter on lightweight extruded hose.
14
Hot or Cold Water Wall-Mounted Units
M-756 Stainless Steel Wall-Mounted Hose Station
M-156N Bronze Wall-Mounted Hose Station
These hot or cold water hose stations are designed for use wherever hose
service is required. The compact units include a single control valve, stainless
steel hose rack and mounting attachments. Wall-mounted unit is designed
to mount one inch away from the wall.
Mixing Units-Hose Stations
Specifications

Maximum recommended
operating temperature:
M-156N (Bronze*)200°F/93°C
Hose Station/M-756 (All Stainless Steel) Hose Station

Maximum working
pressure:
1
50 psi
Wall-Mounted Dimensions
NOTE: Intended for cold or hot water use only.
Mixing Units-Hose Stations
M-156N (Bronze*) Hose Station/M-756 (All Stainless Steel) Hose Station
Wall-Mounted Dimensions
Shown above: M-756 with MP-88 mounting plate; shown
with Strahman premium hose assembly and S-70 Series nozzle.
Shown below: M-156N; shown with Strahman premium hose assembly
and M-70 Series nozzle, available with MP-88 mounting plate.
PARTS
Model M-156N Hose Station
odel M-156N Hose Station
*Available Bronze Chrome plated
PARTS LIST
r (Not shown)
M-156N Material
Bronze
SST 304
SST 304
Part No.
Brass
or (Not shown)
shown)
nting Plate (Not shown)
et
iece
Nut
SST 302
1
2
3
4
6
8
PART NO.
PART
1
BODY
*Available Bronze Chrome plated
2
CAP SCREW
3
LOCK WASHER (Not shown)
4
CONNECTOR
6
SLEEVE ANCHOR (Not shown)
8
HOSE RACK
10
SPACER (Not shown)
11
MP-88 MOUNTING PLATE (Not shown)
20
UNION GASKET
21
UNION TAIL PIECE
22
INLET UNION NUT
M-756 Material
SST 316
For parts 20, 21, and 22 see page 34. Order by name and number.
SST 304
PARTS LIST
SSTSee
410 pg. 34 Globe Valve for Torque
Part
M-156N
Material
M-756
Material
SST 303
Body
SST is316
SST 304
MP-88 Bronze
stainless steel mounting plate
standard on M-756 and optional on M-156N. Refer to page 37.
Cap
SST 304
SST 304
SSTScrew
302
SST 303
Lock
Washer (Not shown)
SST 304
SST 410
SST 304
Connector
Brass
SST 303
Non Asbestos
Note:
Sleeve
Anchor (Not shown)
SST 304
MP-88 stainless steel mounting plate is standard on M-756 and optional on M-156N. Refer to page 37.
SST 303
For Parts 20,SST
21,302
22 see page 35.
Hose
Rack
SST 302
SST 303
15
Hot or Cold Water Wall-Mounted Units
M-358 Bronze Series
M-758 Stainless Steel Series
Designed for use where concealed piping and attractive appearance
are required, these hose stations product hot or cold water. The compact
unit includes a single control valve, stainless steel hose rack and
mounting attachment.
Available in Recessed and Pedestal Series.
Units-Hose
Stations
Specifications

Maximum recommended
operating temperature:
200°F/93°C

Maximum working pressure:
150 psi
-358 and M-758 (All Stainless Steel) Recessed/Pedestal Series
NOTE: W hen ordering, specify angle valve (back entry)
gned for use where
concealed
piping and attractive appearance are required, these hose stations produce hot
or globe valve ( top entry).
ld water. The compact unit includes a single control valve, stainless steel hose rack, and mounting attachments.
NOTE: Intended for cold or hot water use only;
not suitable for steam service.
cessed Series for Hot or Cold Water
ssed wall-type hose station is enclosed in a stainless steel box for easy mounting.
Mixing Units-Hose Sta
Shown above: M-758 recessed; shown with Strahman
premium hose assembly and S-70 Series nozzle.
Available: Bronze M-358; both also available as a pedestal series.
ximum recommended operating temperature: 200˚F/93˚C
ximum working pressure: 150 psi
Recessed
Dimensions
Mixing
Units-Hose
Station
: When ordering, specify angle valve (back entry) M-358 (Bronze/Chrome) Recessed/M-758 (All Stainless Steel)
(Recessed
Box
Standard
Stainless
Steel)
or globeM-358/M-758
valve (top entry). Recessed Series Dimensions
M-358 (Bronze/Chrome)
Recessed/M-758 (All Stainless Steel) Recessed Dimensions
Unit Shown:
Recessed
M-358 Steel)
(Recessed Box Standard Stainless
M-358 (Bronze/Chrome) Pedestal/M-758 (All Stainless Steel) Pedestal Dimensions
See pg. 34 Globe Valve for Torque
(Pedestal Head,
Tube and Base Standard Stainless Steel)
M-358 (Bronze/Chrome) Pedestal/M-758 (All Stainless Steel) Pedestal Dimensions
destal 16Series for Hot or Cold Water
(Pedestal Head, Tube and Base Standard Stainless Steel)
hman’s pedestal-type hose stations for hot or cold water
3/4” NPT
Hot or Cold Water Wall-Mounted Units
M-120 Wall-Mounted Hose Station
The M-120 Wall-Mounted Hose Station is made of stainless steel and comes
with (2) ½” stainless steel wall mounting bolts and zinc plated steel anchors
for strength and durability.
Specifications

Maximum operating temperature
200°F/93°C

Ball valve and bracket are rated
at a maximum working pressure
1,000 psi

With Strahman Hose Assembly and
Nozzle, maximum working pressure
150 psi

¾” full port 316 stainless steel
ball valve, PTFE packing

Stainless steel hose rack for 50 feet of hose

½” Stainless steel wall mounting bolts

Stainless steel ¼ turn On/Off valve for ease of operation

Zinc plated steel anchors
NOTE: Intended for cold or hot water use only;
not suitable for steam service.
Shown: M-120 Wall Mounted Hose Station; shown with
premium hose assembly and S-Series nozzle.
15 FT-LB Max
Torque
PARTS
PART NO.
PART
MATERIAL
1
BALL VALVE
316 SST
2
BRACKET
304L SST
3
HOSE RACK CONNECTOR
303 SST
4
HOSE RACK
302 SST
5
HOSE RACK SPACER
303 SST
6
½” BOLT
18-8 SST
17
Cabinet, Recessed and Pedestal Series
CEC-1000 Series
Strahman’s CEC-1000 stainless steel cabinets keep mixing units
and hoses out of the way and free from dust. Any standard Strahman
wall-mounted mixing unit-hose station can be installed in this
spacious cabinet, which is designed with flush hinges to allow
the unit’s large double doors to swing open at 180°, making it
easy to access and clean the enclosed unit.
When ordering, specify angle valves (back entry)
or globe valves (top entry).
Specifications
Maximum working pressure:
150 psi

Maximum working temperature:
200°F/93°C
Shown: M-750TG unit with hose assembly and nozzle.

CEC-1000 Series available for:
M-5000TG/M-5700TG/M-5000TG LowFlow
M-159TG/M-750TG
M-156N/M-756
M-144TG
NOTE: Individual unit specifications for cabinet
mounting are available upon request.
NOTE: To ensure proper performance, we recommend
that a standard Strahman Hose Assembly be
used with these products.
“We buy the Strahman nozzles because in
essence there is no competition. There is
no product on the market that matches
the quality and durability of Strahman.”
Glen, General Manager
Sweetener Manufacturer
18
Shown: M-5000TG unit with Hose
Assembly and nozzle enclosed in cabinet above.
Note: Custom enclosures available for surface
mounting and/or inclusion of auxiliary equipment.
Cabinet, Recessed and Pedestal Series
Recessed Series
Strahman’s recessed mixing units are designed to conceal mixing
unit piping in a stainless steel box for recessed wall mounting.
All exposed parts are stainless steel. These units are ideal for
new construction or other places where concealed piping and
good looks are desirable.
Specifications

Maximum recommended
operating temperature
200°F/93°C

Maximum working pressure
150 psi

Recessed Series available for:
M-5000TG/5700TG/M5000TG Low Flow,
M-159/750/159TG/750TG
NOTE: W hen ordering, specify angle valves (back entry)
or globe valves (top entry).
Shown: Recessed Series with M-5000TG unit;
shown with premium hose assembly and S-70 Series nozzle
Recessed Series Dimensions
Shown: Recessed Series with M-159TG unit
19
Cabinet, Recessed and Pedestal Series
M-200TS Recessed Wall Box
The Thermostatically Controlled Hot and Cold Water Mixing Unit
features high quality and rugged construction. The unit’s accurate,
solid, liquid-filled thermostat allows you to set the exact output of
water temperature desired from cold to 160°F. Featuring durable
bronze body construction with replaceable corrosion-resistant
components, the M-200TS valve maximizes cleaning effectiveness
for any application. Both the piston and liner are made of stainless
steel for long-lasting reliability.
Specifications
 Integral one button shut-off: Pull on and push off
 P
recise temperature control from cold to 110°F
to 160°F in this instance (There is a 50° difference
from maximum temperature to cool water.)
 Adjustable temperature limit stop for operator safety
 Replaceable components facilitate service
 Optional compressed air outlet
NOTE: 1-year warranty
“The Strahman equipment really holds
up. The products do not have to be
replaced often, which helps with our
budgeting. The customer service is great
too. Mainly, the equipment holds up. It’s
strong...you install it and forget it. For
plant engineers that’s great because you
don’t have to worry about purchasing
new equipment each year.”
Ron, Director of Safety, Dairy
20
Shown: Recessed Series with M-200TS unit;
shown with premium hose assembly and S-70 Series nozzle
Cabinet, Recessed and Pedestal Series
Multiple Series with Airline
Strahman’s air equipped wall plate adds a new element for customers
in need of a compress air hookup near their mixing unit. The finished
stainless steel plate allows for easy mounting and maintenance of
both the mixing unit and compressed air valve.
Pedestal Series
Strahman’s pedestal-type mixing-units can be mounted anywhere
floor piping is available. The pedestal tube, head and cover are
ruggedly constructed of stainless steel, while the mixing unit is
stainless steel, making it ideal where efficiency and good looks
are desired.
Specifications

Maximum water temperature:
200°F/93°C

Maximum working pressure:
150 psi steam
Multiple and Pedestal Series Available:
Shown: Multiple Series M-750 with
ball valves; shown with premium hose
assembly and S-70 Series nozzle.
Standard Mixing Units Available
in Bronze and Stainless Steel

M-5000TG

M-750TG

M-5000TG Low Flow

M-156N

M-5700TG

M-756

M-159

M-144TG

M-159TG

M-200TS

M-750

M-5000TS
Please contact Customer Service for product details.
Shown: Pedestal Series M-750TG with
globe valves; shown with premium hose
assembly and HP-150 nozzle.
21
Spray Nozzles
M-70 Bronze Series Spray Nozzle
M-70 Low Flow Bronze Series Spray Nozzle
S-70 Series Stainless Steel Spray Nozzle
Many of our customers have said Strahman spray nozzles are the
best on the market. That is because at Strahman, we combine modern
and innovative engineering with premium quality parts to build hose
nozzles strong enough to withstand even the most rugged applications.
All of Strahman’s spray nozzles are available in black, white or red.
This rubber-coated, precision-made nozzle enables the operator to
achieve any type of stream of water — from a soft spray to a strong,
straight stream — simply by pressing the lever. This convenient control
of the wash assures better cleaning with a lot less effort.
The Automatic Water Saver Spray Nozzle automatically shuts off the moment
the lever is released, thereby eliminating all waste of water. By purchasing an
M-70 Low Flow, you will benefit from reduced water consumption rates and
still get the same modern and innovative engineering principals and premium
quality parts found in all of our products.
Specifications
Maximum working pressure:
150 psi (10 BAR)

Maximum recommended
operating temperature:
200°F/93°C

M-70 Series: all bronze construction
S-70 Series: stainless steel construction

Available: B
lack (M-70, S-70)
White (M-75, S-75)
Red (M-77, S-77)
Shown: Red M-70 (black cover),
M-75 (white cover), M-77 (red cover)

Long handle design grip for whole hand placement

Replaceable (heavy duty) rubber cover

Stainless steel seat design prevents
nozzle seat leakage
Instant water shut-off when trigger is released

Optional ½”, ⅝”, ¾” I.D. hose barb, or ¾” GHT
swivel or non swivel adapter with locking ring;
bronze or stainless steel
NOTE: Intended for water use only;
not suitable for steam service
NOTE: 1-year limited warranty
22
M-70 FLOW TEST
STANDARD
PSI
LOW FLOW
FLOW (gpm)
20
3¼
2¼
30
4¼
2¾
40
5 1/8
3¼
50
7
5 /8
3¾
60
6¾
4 1/8
70
7½
4½
80
7¾
4 7/8
90
8¼
5
100
9
5 1/8
Spray Nozzles
Mini M-70 Bronze Series Spray Nozzle
NEW! Mini S-70 Stainless Steel Series
Strahman, the industry leader, adds the Mini M-70 to its family of nozzles.
The Mini M-70 weighs only 1.8 lbs. and provides the same high quality as
Strahman’s premium heavy-duty M-70.
Offered only in bronze construction until now, the Mini S-70 Series
Spray Nozzle is now avaialble in all stainless steel construction!
Specifications
Maximum working pressure:
150 psi (10 BAR)

Maximum recommended
operating temperature:
200°F/93°C
Flow rates:
2.5-7 gpm at 50-80 psi

Long handle design grip for whole hand placement

Weighs only 1.8 lbs

Rev-o-cap Renewable Cartridge
unit design for greater longevity

Replaceable (heavy duty) rubber
cover available in black and white

Stainless steel seat design prevents
nozzle seat leakage
Bronze or stainless steel construction
Instant water shut-off when trigger is released

Includes ½”, ⅝”, ¾” I.D. hose barb, or
¾” GHT swivel adapter with locking ring
NOTE: Intended for water use only;
not suitable for steam service
“The Hydro-Pro is comfortable to hold,
with no discernible heat transfer to
workers’ hands. And, the new nozzles
have been dropped, scraped and
banged during test use, yet continue
to work perfectly.”
NEW!
Shown Above: White bronze Mini Series Nozzle with ¾” GHT swivel adapter
Shown Below: Black stainless steel Mini Series Nozzle
with ¾” GHT swivel adapter
Michael, Production Manager
Soft Drink Bottling Plant
23
Spray Nozzles
F-90 Series Soft Spray Nozzle
S-90 Series Stainless Steel Soft Spray Nozzle
Strahman’s Soft Spray Only Nozzle releases a soft spray that won’t
damage breakable products. It shuts off automatically when the nozzle’s
lever arm is released to help eliminate all waste of water.
S-80 Series Solid Stream Spray Nozzle
S-80 Series Stainless Steel Solid Stream Spray Nozzle
This heavy duty, Strahman Solid Stream Nozzle releases a solid stream
of water only, and it is perfect for applications where fast, efficient cleanup
is necessary, but with minimum moisture. The S-80 Series nozzle washes
away solids while keeping surrounding areas dry.
Specifications
Maximum working pressure:
150 psi (10 BAR)

Maximum recommended
operating temperature:
200°F/93°C

Available: B
lack (S-90, F-90, S-80),
White (S-95, F-95, S-85)
Red (S-97, F-97, S-87)
NOTE: Intended for water use only;
not suitable for steam service
Shown: Black F-90 Series nozzle,
White S-85 Series nozzle, and Red S-87 Series nozzle
24
Spray Nozzles
E-76 Series Extension Nozzle
S-76 Series Stainless Steel Extension Nozzle
The Strahman Extension Nozzle was designed specifically for use in the meatpacking industry. It includes a standard, water-saving spray nozzle with a threefoot standard stainless steel extension shaft for washing down meat, and for use
in other hard-to-reach applications. (Special length extension shafts are available
upon request.) Government-approved and industry-tested, the Extension Nozzle
includes interchangeable heads — one is for adjusting the water stream from a
steady stream to a fine spray; the other is a chisel head which gives off a fan spray.
The extension’s curved head directs spray water in a downward direction, perfect for
washing away grease and grime that might drop onto meat from overhead rafters.
(Straight extensions are also available.)
Specifications
Maximum working pressure:
150 psi (10 BAR)

Maximum recommended
operating temperature:
200°F/93°C
Available: black, white and red
NOTE: Intended for water use only; not suitable for steam service
“The Strahman Spray Nozzles simply
do not wear out. It’s just an excellent
product. They are simply the best on
the market. I’m looking forward to
trying the new Hydro-Pro Spray Nozzle.”
Shown: Black E-76 with extension, Red E-76
with extension, White E-76 with extension
Available: Stainless steel S-76 in black, white and red
Ron, Superintendent
Bakery Industry
25
Spray Nozzles
Hydro-Pro 150® Spray Nozzle
Hydro-Pro 150® Low Flow Spray Nozzle
The Strahman Hydro-Pro 150® is constructed with a stainless steel housing
for strength and durability, yet this solid, water saver spray nozzle weighs less
than two pounds, and is ergonomically designed to reduce user fatigue. In addition
to being extremely lightweight, the Hydro-Pro 150® features a patented, locking
trigger mechanism that allows users to lock in a desired spray pattern without
having to maintain pressure on the trigger. It also reduces misdirected spraying.
Equipped with a waterproof nylon cover that resists cracks and abrasions, this
rugged nozzle lasts for a long time and stays cool even when using water as hot
as 200˚F. It is the most advanced spray nozzle around, and it is only from Strahman!
Along with these features, when you purchase a Hydro-Pro 150 Low Flow Spray
Nozzle, you willl quickly see a reduction in water consumption and the savings
that are sure to go along with it!
Specifications
Maximum working pressure:
150 psi (10 BAR)

Maximum recommended
operating temperature:
200°F/93°C
Shown: Black Hydro-Pro 150
Shown Below: White and Red Hydro-Pro 150
Available: black, white and red
Available with or without swivel adapter
NOTE: Intended for water use only; not suitable for steam service
HYDRO-PRO-150 FLOW TEST
STANDARD
PSI
26
LOW FLOW
FLOW (gpm)
20
3¼
2¼
30
4¼
2¾
40
5 1/8
3¼
50
7
5 /8
3¾
60
6¾
4 1/8
70
7½
4½
80
7¾
4 7/8
90
8¼
5
100
9
5 1/8
Spray Nozzles
Hydro-Pro 150® QC Spray Nozzle
The Hydro-Pro 150QC® spray nozzle is specially designed to
accept any of the Quick Connect attachments with a simple
¼ turn to connect and disconnect for safe and convenient cleaning!
Same great performance as the original Hydro-Pro 150 Spray Nozzle.
Specifications

Maximum recommended
operating pressure:
200°F/93°C

Maximum working pressure:
150 psi

F low rates:
5 -7 gpm (50-80 psi);
10 gpm maximum
at 150 psi
Shown: Red Hydro-Pro 150 with extension

Available: black, white or red cover

Available with or without swivel adapter
NOTE: I ntended for water use only.
Not suitable for steam service.
Features

Plastic 16 oz. bottle or 2 gallon container
for safe, convenient, targeted applications
of soaps and disinfectants

6,” 24” and 36” stainless steel extension
wand for concentrated directional spray

Stainless steel deflector tip on container
attachments ensures spray direction
Shown: 2 gallon container attachment

Operating temperature, pressure and
flow rates are the same as the original
Hydro-Pro spray nozzle
Quick Connect Accessories

2 gallon soap reservoir bottle

6” extension wand with 16 oz. bottle

6” extension wand with interchangeable
heads (adjustable and chisel type)

24” extension wand, straight flow only

36” extension wand with interchangeable
heads (adjustable and chisel type)
Shown: Black Hydro-Pro 150 with 16 oz. bottle
27
Pre-Rinse Spray Nozzles
Kwik Clean 3® Nozzle - EPAct 2005 Compliant
A True Revolution in Ultra-Low-Flow,
Ultra-High-Performance Pre-Rinse Nozzles!
The quickest, most cost- and energy-efficient nozzle made!
For 90 years, the Strahman name has been the wash down equipment industry
standard for food processors. We have earned our reputation for high quality, durable
and cost-effective equipment. Now we have done it again! Our engineers have
developed a patented pre-rinse nozzle that provides ultra-high performance and
industry-leading reliability for restaurants, commercial kitchens and institutions.
Our newest product, the patented Kwik Clean 3®, is a high efficiency nozzle
that both saves time and substantially reduces energy, water and sewage costs.
Our unique three-tip nozzle handles everything from baked on sauce to the
gentle rinsing of fine stemware.
Kwik Clean 3® Nozzle carries a 5-year warranty on workable parts.
Available as a full assembly with goose neck spring and stainless
steel armor-wrapped hose. For information on full assembly along
with faucet and sink, please contact Strahman Valves, Inc.
5-year
warranty
15° Fan Spray Tip
Flow Rate: 0.91 gpm @ 60 psi
Description: for light rinse
cleaning applications.
Solid Stream Tip
Flow Rate: 0.99 gpm @ 60 psi
Description: High-impact
jet pattern for tough
cleaning applications.
5° Fan Spray Tip
Flow Rate: 0.92 gpm @ 60 psi
Description: for normal rinse
cleaning applications.
Maximum Operating Temperature: 160°F. Other tips available, down to 0.3 gpm.
28
Spray Pre-Rinse Nozzles
Vari-Spray™ Pre-Rinse Spray Nozzle!
The low-flow pre-rinse spray nozzle with the world’s best flexibility
and truly superior cleaning performance!
Vari-Spray™ is a revolutionary new pre-rinse spray nozzle that provides an
infinite choice of spray patterns (from a soft hollow cone to a powerful solid jet stream)
instantly at the squeeze of a trigger. The first pre-rinse nozzle to turn the handle into
a spray nozzle, Vari-Spray™’s operating parts are made of stainless steel and warranted
for 5 years. With a standard flow rate of 1.25 gpm, this low-flow nozzle will save you
about $450 per year in water, sewage and energy costs compared to the industrystandard nozzle at 1.42 gpm. Tackle everything from gently rinsing fine stemware
to blasting off baked-on sauce by simply applying different pressure when squeezing
the trigger.
Vari-Spray™ provides one the best lifetime values in the industry!
5-year
warranty
Please contact Strahman Valves, Inc. for more information about our
full pre-rinse product line which includes pre-rinse spray nozzles, handle,
super-reinforced pre-rinse hose, Pivot-Pro, hose reels and accessories.
29
Hoses, Hose Reels and Adapters
Strahman Hose Assemblies
Strahman has been supplying industrial strength hoses since 1921.
We combine years of solid craftsmanship and innovative new solutions
to offer hoses that are safe, reliable, durable, and easy to maintain.
All Strahman hoses are assembled with bronze or stainless steel fittings.
Some hoses include stainless steel internal spring assemblies on one or
both ends for added durability and extended hose life.
Shown (top to bottom):

⅝” I.D. / 1⅛” O.D. Extruded yellow hose
with FDA approved internal tube.
Also available in black and white.

⅝” I.D. / 1⅛” O.D. Premium Wrapped black
hose with FDA internal tube.

⅝” I.D. / 1⅛” O.D. Premium Wrapped white
hose with FDA internal tube — food grade hose.

⅝” I.D. / 1⅛” O.D. Premium Wrapped red
hose with FDA approved internal tube.
NOTE: S
trahman hoses come standard in 25, 50, 75, and 100 foot lengths.
Standard length 50 foot hose supplied for use on mixing unitshose stations. Check with factory if longer length is required.
STRAHMAN HOSE ASSEMBLIES
HOSE I.D. /O.D.
DESCRIPTION
COLORS
AVAILABLE
TEMPERATURE
RATING
MAXIMUM
WORKING PRESSURE
MINIMUM
BURST
USE/RATING
CODE
/ ” I.D. / 11/ 8” O.D. EXTRUDED
BLACK, YELLOW, WHITE
-20 to 200˚F
300 psi
1,500
A
/ ” I.D. / 1 / ” O.D.
PREMIUM WRAPPED
RED, WHITE, BLACK
-20 to 200˚F
300 psi
1,500
B
58
58
18
Note: When used with mixing-unit hose stations, the maximum pressure rating will be 150 psi.
Note: Do not excessively tighten hose end nut during installation.
USE/RATING CODES:
A: USE - Excellent abrasion resistance, oil, fat and chemical resistance.
B: USE - Oil, fat and chemical resistance.
RATING - General purpose hose for food, water and air with FDA approved tube.
RATING - General purpose hose for food, water and air with FDA approved tube.
REFER TO PAGE 1 FOR IMPORTANT ADDITIONAL INFORMATION.
30
Hoses, Hose Reels and Adapters
For Use With Mixing Unit-Hose Stations and Hose Reels —
Premium Wrapped Hose Assembly and
Extruded Hose Assembly
Premium Wrapped Hose Assembly R and RS
Masterfully crafted with precisely woven super-strength cord, Strahman’s
premium wrapped water hose is engineered to provide extreme flexibility
and strength, while remaining lightweight. In fact, it is the easiest
handling hose made. The hose is covered with Neoprene,
making it resistant to lactic acid and oil, and its unique
braided construction resists kinks and contributes to
the hose’s ability, making it as flexible as rope and
practically indestructible.
Available in red, white and black.
⅝” I.D. High pressure, Neoprene premium wrapped,
Homoflex hot water hose. ⅝” hose adapter on hose with ball stop.
Standard lengths: 25, 50, 75 and 100 feet.
Extruded Hose Assembly — A Lower Cost Hose for a Variety of Applications
Strahman’s Extruded “Yellow” Hose costs less than our standard braided hoses,
making it an economical solution for applications that don’t require premium wrapped
construction. The Extruded Hose is flexible, lightweight and easy to handle, yet it offers
the same heavy-duty quality you expect from Strahman. This versatile, bright “yellow,”
⅝” I.D. hose expertly resists oil, abrasives, and fatty and lactic acids, and it is designed
to handle a wide range of temperatures and work pressures.
Shown: Standard S Hose Assembly
with stainless steel fittings;
shown with S-Series nozzle.
Available in yellow, black and white.
⅝” I.D. Extruded high pressure hot water hose with ¾” male NPT fitting on unit end
and swivel adapter on the other end. Standard lengths: 25, 50, 75 and 100 feet.
Specifications
Maximum working pressure:
150 psi

Maximum working temperature:
200°F/93°C

Available premium in red, black and white
Available extruded in yellow, black and white
Shown: Extruded Hose Assembly
with bronze fittings
31
Hoses, Hose Reels and Adapters
Ergonomic Hose Assembly
Ergonomic Extruded Hose Assembly
This flexible, lightweight ⅝” extruded high pressure hot water hose is made to fit Strahman’s
mixing units-hose stations (M-5000, M-159, M-156N, M-358, M-2000TS, M-5000TS).
⅝” I.D. Extruded high pressure hot water hose with ¾” male NPT
fitting on unit end and Swivel-Pro adapter on the other end. Standard
lengths: 25, 50, 75 and 100 feet.
Heavy Duty Water Hose Assemblies
for Garden Hose Connection
“E” and “ES” (All Stainless Steel) Hose Assemblies
This high pressure, black, Homoflex, ⅝” I.D. hot water hose (with ¾” female
garden hose coupling on one end) is appropriate for any general hot- or coldwater wash down operation where a hose and spray nozzle are necessary. It is
intended for use with hot and cold water only, and is not appropriate for use
in steam service. This hose assembly is available in black, white or red hose.
Other lengths are available.
Shown: Ergonomic Hose Package with Hydro-Pro 150
nozzle and Swivel Pro.
Assembly “E” and “ES” — For general washdown with hot or cold water
where a hose and spray nozzle are required. Standard lengths: 25, 50, 75
and 100 feet — for hot and/or cold water use only.
⅝” I.D. High pressure Neoprene premium wrapped Homoflex black hot water
hose with ¾” female garden hose coupling on one end with Swivel Connector
on the nozzle end. Option: Internal spring assembly (nozzle end).
HR-100 Wall-Mounted Hose Rack
A good looking and practical hose rack that helps to keep hoses neatly
coiled and in place. It is designed for those places where hose service is
required and yet does not call for a Strahman Mixing Unit. They can be
easily installed on any conventional masonry wall (brick, tile, cement or
cinder block) with expanding metal anchors, supplied with the unit.
Model HR-100 is designed to hold maximum 50 feet of hose and
come with complete mounting instructions. Made entirely of Stainless
Steel — except Loxin Shields. Supplied with conventional type fittings.
Optional: HR-100L designed to hold up to a maximum
of 100 feet of hose.
Shown: HR-100 Wall-Mounted Hose Rack; shown with
premium hose assembly and S-70 Series nozzle.
32
Hoses, Hose Reels and Adapters
Strahman Standard Hose Reel
Strahman’s spring rewind hose reels, in stainless steel or carbon steel
models, make winding and rewinding our heavy-duty water hose quick
and efficient, and provide tiny hose storage and protection. Our reels
are equipped with a heavy-duty internal spring motor for effortless
winding and rewinding. A sturdy ratchet assembly locks the reel when
the desired length of hose has been pulled out; a gentle tug on the hose
will unlock the reel and trigger the spring motor to retract the hose.
Each hose includes a ball stop to prevent damage to the hose reel
rollers and our spray nozzle.
These convenient and sturdy hose reels can be installed on the floor,
wall or ceiling, and come equipped either with or without our premium
wrapped or extruded hose assemblies (with stainless steel or bronze
fittings and nozzles). This hose assembly includes our ⅝” I.D. hose,
in black, red, white or yellow with our water saver spray nozzle. Ceiling
mount might require a special heavy-duty spring; please contact
Strahman for information on ceiling mounted hose reels.
Specifications

Standard holds up to 50 ft. of “R” or “RS”
Carbon Steel/Stainless Steel (⅝” I.D.) hose
Shown: Standard Carbon Steel Hose Reel
Available: Stainless Steel Hose Reel

Hose reel also available to hold up to 100 ft. of “R”
or “RS” Carbon Steel/Stainless Steel (⅝” I.D.) hose
These reels are available for use with the following Strahman units:
M-156N, M-159/M-159TG, M-358, M-750/M-750TG,
M-756, M-5000TG, M-5700TG, M-144TG, M-5000TS
NOTE: The Strahman spring rewind hose reel is now available
for use with the M-5000 or M-5700 mixing unit series. Contact
factory for details.
Standard hose reel to be used with our 5/ 8” I.D. hose
assembly “R” or “RS” only, maximum length 50 ft.
Shown above, larger hose reel to be used with our 5/ 8” I.D.
hose assembly “R” or “RS” only, maximum length 100 ft.
33
Hoses, Hose Reels and Adapters
Hi-Sanitary Stainless Steel Hose Reel
Our Hi-Sanitary Stainless Steel Spring Rewind Hose Reel is
perfect for sanitary or harsh environments. The reel’s polished, bare
finish helps reduce the risk of contamination from chipped paint,
providing the best surface for even the most stringent sanitary
requirements. Offered to you by Strahman, the Hi-Sanitary
Stainless Steel Hose Reel delivers the quality and durability
you depend on for all your wash down applications.
Key Benefits

Open construction allows for easy wash down and hand/
brush scrubbing to minimize trapped food material

Mounting plate with opening for easy cleaning and drying

Automatic spring rewind assembly for safe, quick and
easy rewind of hose

All 304 stainless steel construction resists rust
and corrosion

Easily installed on floor and wall only

12-15 lbs. of force are required to unravel hose
Shown: Hi-Sanitary Hose Reel
Hose reel to be used with our 5/ 8” I.D. hose assembly “R” only, maximum length 50 ft.
34
Hoses, Hose Reels and Adapters
The Swivel-Pro™ Standard
with “Ergonomic Hose Package”
Swivel-Pro™, our latest swivel adapter, features an exclusive
ergonomic design. The swivel adapter increases nozzle
control to allow circular, horizontal and vertical nozzle
movements — while maximizing your comfort and safety.
When you package our exclusive Swivel-Pro™ with our
sturdy yet lightweight Hydro-Pro 150® Spray Nozzle,
Strahman is able to offer its “Ergonomic Hose Package”
which is perfect for industrial plant applications where
ergonomic concerns exist.
Specifications
Maximum working pressure
150 psi

Maximum working temperature
200°F/93°C

All stainless steel construction for
strength and durability

Allows circular, horizontal and vertical
movements of nozzle without repositioning
heavy hose for ergonomic value

Supplied with vinyl boot for heat
transfer protection in black or white

Available: ½”, ⅝”, ¾” I.D. hose barb, garden hose
thread and retro-fit
Available: S
tandard (½” NPT) or Mini (⅜” NPT)

Available: S
anitary/Hygienic Clamp on nozzle end
NOTE: 1-year limited warranty
Shown: Swivel-Pro adapter with Hydro-Pro 150 nozzle
and Ergonomic Hose Package.
35
Hoses, Hose Reels and Adapters
Hose Accessories and Adapters
Numerous, easy-to-install hose accessories and adapters are available to keep your Strahman hoses and
nozzles operating properly. Stainless steel hose accessories and adapters are also available upon request.
Nozzle End
Internal stainless steel spring assembly (nozzle end) includes bronze stainless steel Swivel Hose Adapter
for use on Hose Assemblies A. Also available in all stainless steel for Hose Assembly S (not shown).
Unit End
Internal stainless steel spring assembly (unit end) includes a bronze ¾” male NPT adapter for use
on Hose Assembly A and S (not shown).
#21 Regular Adapters (Non-Swivel) and #21S Swivel Adapters (Brass/Stainless Steel)
¾” I.D. hose barb on one end
and ½” male NPT on the other end
½” I.D. hose barb on one end
and ½” male NPT on the other end
5/ 8” I.D. hose barb on one end
and ½” male NPT on the other end
¾” female garden hose thread on one end
and ½” male NPT on the other end
#S21 Regular Adapters (Non-Swivel) and #S21S Swivel Adapters (All Stainless Steel)
½” I.D. hose barb on one end
and ½” male NPT on the other end
¾” I.D. hose barb on one end
and ½” male NPT on the other end
5/ 8” I.D. hose barb on one end
and ½” male NPT on the other end
¾” female garden hose thread on one end
and ½” male NPT on the other end
Miscellaneous (for 5/8” ID hose)
Available in Bronze and Stainless Steel
8 A - Hose Shank
8 B - Adapter Nut
8 D - Adapter (¾” NPT Male)
#8 Exploded
#8 A
36
#8 B
#8 D
Valves
Valves
Soft Seal Piston Valve — ¾” Standard
Bronze and Stainless Steel Models
Strahman’s Soft Seal Piston Valve features PTFE to make
turning and tightening practically effortless. A stainless steel
or bronze piston enters a soft PTFE coated ring to form a super
tight seal without the need for laborious turning. This unique
closure principle prevents foreign materials from interfering
with the seal and positively prevents leaks.
Tighten 25-50 IN-LB
Specifications
200 FT-LB
Torque

Maximum recommended
operating temperature:
370°F/188°C

Maximum working pressure:
150 psi

¾” valve for use with Strahman’s
mixing unit-hose stations

Made with bronze and all stainless
steel working parts

Also available made completely of stainless
steel (V-65/V-18 Series)
Standard Ball Valve
70 FT-LB Max
Torque
Model Shown: V-14-U ¾” Globe Type (Union Connection)
Available: V-14-S ¾” Globe Type (Screwed Ends),
V-18 ¾” Angle Type (Screwed Ends)
SST Models: V-65-SU, V-65-SS and V-18-SS
Specifications

Easy to maintain and replace

F low rates adjustable from low to high

Less wrist fatigue in turning valves to On/Off position

Also available in stainless steel.
NOTE: Not available for steam service
37
WARRANTY
ONE-YEAR LIMITED WARRANTY
STRAHMAN products are warranted to the original purchaser to be free of defects in material and workmanship as specifically stated in product literature or, lacking
that, for 12 months after date of purchase.
STRAHMAN will, at its sole election, repair, replace or make appropriate adjustment where STRAHMAN inspection discloses any such defects occurring in normal
usage within the warranty period. STRAHMAN is not responsible for removal or installation costs. Improper use, modification, alteration, wrongful application or repair
will void the warranty. This warranty excludes normal wear attributable to the particular application in which the product is used. Shipping, freight, insurance and other
transportation charges to return products to Strahman, and the return of repaired or replaced products to the purchaser, are the responsibility of the purchaser.
To obtain warranty service contact STRAHMAN at 1-484-893-5080 or at [email protected] This e-mail address is being protected from spambots. You need
JavaScript enabled to view it .
IMPLIED WARRANTIES INCLUDING THAT OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. STRAHMAN AND/OR SELLER DISCLAIMS ANY LIABILITY FOR
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES.
This is STRAHMAN’s exclusive written warranty.
RETURN POLICY
For any goods to be returned to Strahman Valves Inc. by a customer, a RMA (Return Material Authorization) number must be obtained by the customer from our
Customer Service department prior to shipping material back to Strahman Valves Inc. An RMA number will be issued within 2 working days of receipt of your request
to return goods by our Customer Service department. Any merchandise returned to Strahman Valves Inc. without a RMA number referenced will be returned to
customer at customer expense. No RMA will be issued for discrepancies by the customer reported later than 10 days of receipt of goods. After this period, Strahman
Valves Inc. reserves the right to impose a restocking fee. All returns must be received at the Strahman Valves Inc. facility no later than 30 days from the issuance of the
RMA number. If received after 30 days from the issuance of the RMA number, the return will be refused and return to the customer at customer’s expense.
All returned goods should be sent back insured and packaged to prevent damage to the goods in transit. The cost of the return, unless due to an error by Strahman Valves
Inc., is the responsibility of the customer. Do not send any returned goods to Strahman Valves Inc. freight collect, because it will be refused and not processed accordingly.
RMA numbers will be issued for Warranty and Repair returns, Wrong Product Ordered returns, Shipping Errors by Strahman Valves Inc. returns, Damage Product
returns and any other authorized returns by our Customer Service department. Strahman Valves Inc. is not responsible for any discrepancies not reported to our
Customer Service department within 10 days of receipt of goods. If the product is a custom made item, it is not returnable and no RMA will be issued.
All Warranty and Return items must not only include the RMA number assigned by our customer service department, but must also include the Material Safety
Data Sheet (MSDS) with the goods returned.
All Wrong Product Ordered returns will be subject to our restocking fee (see below). For Shipping Errors by Strahman Valves Inc. returns, Strahman Valves Inc.
will pay for all return shipping fees.
Strahman Valves Inc. reserves the right to inspect all returned product for condition and wear and abuse, and if the material is not in the condition it was originally
sent out to the customer, the customer will bear the cost of repair. The cost charged back to the customer will be at the discretion and approval of management.
If product is damaged in shipping to our customer, our customer must file a claim with our carrier (Fedex or UPS). DO NOT SEND the damaged good back
to Strahman Valves Inc. without first contacting our Customer Service department. Please follow these simple steps when preparing to return material to
Strahman Valves Inc.:
1. Please obtain a RMA number from our Customer Service department.
2. Please include packing slip with the following information:
• Customer Sales Order Number
• Customer name, address, telephone number and email address
• A description for the reason for the return
• The RMA number assigned by our Customer Service Department
• Returned product to Strahman Valves Inc. must be received at the Strahman facility no later than 30 days after receipt of RMA number.
3. The package returned with the product must clearly show the RMA number on the outside of the package. Authorized returns require the RMA number
to be printed in tall red lettering on two different sides of the package.
4. The item returned must also be tagged with the assigned RMA number sent to our customer by our Customer Service department.
PLEASE NOTE THAT FAILURE TO FOLLOW THE ABOVE RULES WILL RESULT IN A DELAY OF PROPERLY PROCESSING YOUR RETURN.
Also note that no RMA will be issue for USED PRODUCTS unless it is to be sent in for repair. No RMA will be issued for new product kept for more than 30 days
after shipment. Restocking Fee Schedule:
• Under 30 days, 30% of price of all returned items subject to approval.
• 31-60 days, 35% of price of all returned items subject to approval.
The Strahman Family of Products Includes:
Wash Down Equipment
Strahman offers a full line of mixing units, hose stations, hoses, nozzles, and wash down accessories.
Our wash down line is designed for industrial use and is used in a wide variety of industries including food,
beverage, pharmaceutical, chemical and other applications.
Pre-Rinse Equipment for Commercial Kitchens
Strahman offers pre-rinse spray nozzles, handles, hoses, hose reels and Pivot Pro swivel connectors.
Designed for use in restaurants, hotels, supermarkets, and all commercial kitchens,
food serving and food preparation applications.
Sampling Valves
Strahman has a full line of sampling valves that produce live samples without exception.
Our sampling valves’ unique design prevents failure caused by sediment or clogging.
Drain Valves
Strahman Drain Valves are designed to prevent clogging. They are ideal for use in liquid and gas service
or with slurries, polymers, and high viscosity fluids that tend to solidify at room temperature.
Last Updated: December, 2012
USA Headquarters
2801 Baglyos Circle  Bethlehem, PA 18020
Phone: (484) 893-5080  Fax: (484) 893-5099  Toll Free: (877) STRAHMAN
France
Savoie Hexapole, F-73420 Mery, France
Tel: 33 (0) 4 79 35 78 00
Fax: 33 (0) 4 79 35 78 20
www.strahmanvalves.com
Germany
Kirchstrasse 16, D-77855, Achern, Germany
Tel: 49 (0) 7841 6846530
Fax: 49 (0) 7841 6846531
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement