RC150 Paver Specifications
RC150 Paver Specifications
Send
Ordering Information1
FX RCP150 Length
Power
Color
LL
24
Options
Model
Length
Power2
Color
Optics
Voltage
Options
FX RCP150
200 (7.87”)
600 (23.62”)
H
L
30
40
LL
24
C20
C30
L
RGB
Specify remote power supply separately below. 2H recommended for higher ambient light environs.
1
5.9”
(150mm)
Tempered glass
Installation
housing
(stainless steel)
Luminaire
Power2
n
LED pavers in 2 standard lengths
for outdoor and indoor use
200
n H = 10W, 3000K, 733 lm
n
Trimless for seamless integration
into grade
n
L = 5.4W, 3000K, 405 lm
n
L = RGB: R 2.1W, G 2.2W, B 2.2W
n
n
Snap in installation with no exposed
hardware
n
UL STD 1598, wet location,
walkover rated 1000 lb
n
Stainless steel 304 construction,
direct concrete pour housing, with
anti slip tempered glass 5/8” thick
n
4.7 ”
(120mm)
Sustainable design, replaceable
LED module
Supplied with oil and water resistant
3’ feed cable standard, 18/2 AWG
Length
n
200 = 7.87” x 5.9” (200mm x 150mm)
x 4.7” H (120mm)
n
600 = 23.62” x 5.9” (600mm x 150mm)
x 600 = 4.7” H (120mm)
600
H = 23W, 3000K, 1600 lm
n
n
L = 12W, 3000K, 730 lm
n
L = RGB: R 5.25W, G 6.6W, B 6.6W
Color Temperature
n
30 = 3000K
n
40 = 4000K
nRGB
n
2 Step MacAdam
n
CRI: > 85
Optics
n
LL = even illumination
Voltage
n
24 = 24VDC fixture voltage
Options
Conduit to splice
box (by others)
n
C20 = 20’(6m) feed cable
n
C30 = 30’(9m) feed cable
Power Supply2 (Remote)
Non-Dim
D-520-24007: Osram 96W, 24VDC, 120-277VAC
Dim
D-520-24006: Osram 10% 0-10V dimming,
96W, 24VDC, 120-277VAC
6” gravel or drainage pipe (by others)
IL-JB-LED-24003-120V-DFPN: Lutron LTE 1%
Forward Phase (with neutral) dimming, 5-40W,
24VDC, 120VAC, Case K, dry location enclosure
IL-JB-LED-24010-UNV-D3W: Lutron L3D 1%
3-wire dimming, 5-40W, 24VDC, 120-277VAC,
Case K, dry location enclosure
IL-JB-LED-24010-UNV-DES: Lutron L3D 1%
EcoSystem dimming, 5-40W, 24VDC, 120277VAC, Case K, supplied in a dry location
enclosure
RGB
D-550-20003: EldoLED LIN100D2, CV 24V
DMX/Sequencer Interface, requires a 24VDC
driver ordered separately. (DMX control not
included)
See power supply pages for details. No enclosure, unless stated. lm80 values shown.
2
IP68
410 381 1497 inter-lux.com [email protected]
Inter-lux reserves the right to make technical changes without notice.
(rev 1)
1
RC150 Paver Dimensions
Fixture
24.0”
(600mm)
0.97”
(25mm)
3.35”
(85mm)
6.0”
(150mm)
Cable (2’ standard)
Top view
Side view
5/8” satin tempered glass
8.0”
(200mm)
6.0”
(150mm)
Stainless steel
housing 304
Housing
Top view
3.74”
(95mm)
Side view
7/8” diameter
knock out
410 381 1497 inter-lux.com [email protected]
Inter-lux reserves the right to make technical changes without notice.
2
RC150 Paver Power Supplies
Single Color Drivers
Qty.
Case
Nominal Input
Voltage (V)
Nominal Input
Current (A)
Power
Factor
Output Power
Range (W)
Dimming
Mode
Dimming
Control
Dimming
Range
Location
Rating
Osram non-dim
1
120
277
0.97
0.39
0.9
1-96
N/A
N/A
N/A
Damp
D-520-24006
Osram 0-10V dim
1
120
277
0.97
0.39
0.9
1-96
PWM
0-10V
10 –100%
Damp
IL-JB-LED-24003120V-DFPN
Hi-Lume A Series
LED LTE
2
120
0.38
0.99
5-40
PWM
Forward phase
with neutral
1 –100%
Dry
IL-JB-LED-24010UNV-D3W
Hi-Lume A Series
LED L3D, 3-wire
2
120
277
0.38
0.17
0.99
0.96
5-40
PWM
3-Wire
1 –100%
Dry
IL-JB-LED-24010UNV-DES
Hi-Lume A Series
LED L3D, EcoSystem
2
120
277
0.37
0.17
0.99
0.96
5-40
PWM
Ecosystem®
1 –100%
Dry
Part Number
Description
D-520-24007
Although it is possible to exceed the remote mounting distance, the installer and/or end user must take precautions to prevent and/or test the effects of EMI (electromagnetic interference).
3.0”
(76mm)
1.38”
(35mm)
4.2”
(107mm)
1.17"
(30mm)
Pout (max): 96 W
Vout: 24VDC
Iout: 0.04-4ADC
RED
White (N)
9.0”
3.5”
4.5”
supplied in dry
location enclosure
1.53”
(39mm)
96W Dim
LTE (forward phase with neutral)
Wiring Diagram for Forward Phase Control
DIM Return (-) YELLOW
Black (L)
4.9”
(124mm)
Return (-) BLUE
0-10 V DC
n.c.
Red (+)
Black (L)
White (N)
Power Supply
(non-dim)
Purple (+)
Blue (-)
Red (+)
Power Supply
(0-10V dim)
Yellow (+)
Gray (-)
Blue not connected
+V
Dimmed Hot (Black)
Hi-lume®
A-Series
Neutral (White)
LED light
engine
-V
Ground (Green)
Ground
Note: Colors shown correspond to terminal blocks on driver.
L3D (Ecosystem®)
L3D (3-wire)
Wiring Diagram for 3-Wire Control
To 3-wire Dimming Control
Gray (-)
24V DC (+)
96W Non-Dim
0.88”
(22mm)
Neutral (White)
Ground (Green)
Load per driver
Osram
Switched Hot (Black)
Switched Hot (Black)
Dimmed Hot (Orange)
Maximum wiring distance*
Wiring Diagram for EcoSystem® Digital Control
+V
Hi-lume®
A-Series
LED light
engine
-V
Ground
Note: Colors shown correspond to terminal blocks on driver.
To Line
Voltage
Input
1.99”
(51mm)
4.6”
(117mm)
To EcoSystem®
Digital Link
Purple (+)
Wiring diagrams
VOLTAGE
120-277 V AC
50/60Hz
2.0”
4.42”
(36mm)
1.68"
(43mm)
Black (L)
1.0”
(25mm)
8.94"
(227mm)
9.48"
(241mm)
White (N)
0.64”
(16mm)
To Forward Phase Control
Case dimensions
Case 2 Hi-Lume, case K (enclosure supplied)
Case 1 (no enclosure)
+V
Neutral (White)
Ground (Green)
E1 (Purple)
E2 (Purple)
Hi-lume®
A-Series
LED light
engine
-V
Ground
Note: Colors shown correspond to terminal blocks on driver.
Lutron
Wire gauge
≤48W
≤72W
≤96W
#18AWG
37’
25’
18’
≤40W
15’
#16AWG
59’
39’
29’
25’
#14AWG
95’
63’
47’
40’
#12AWG
151’
101’
75’
60’
#10AWG
241’
160’
120’
—
Voltage drop guide for 24VDC. Actual Voltage drop
to be calculated by installer
*
410 381 1497 inter-lux.com [email protected]
Inter-lux reserves the right to make technical changes without notice.
3
RC150 Paver RGB Interface
RGB Control Interface Details
Qty.
Part Number
Description
Nominal Input
Voltage (V)
Maximum Output
per channel (W)
Output Power
Range (W)
D-550-20003
DMX/Sequencer Interface
24
32
96
RGB Control case dimensions (DMX/Sequencer Interface)
110 mm / 4.33”
23 mm / 0.91”
21.5 mm / 0.85”
ø 4.2 mm / 0.17”
10 mm / 0.39”
TC
DMX in +
DMX in -
Ext in
Ext in +
LED supply +
30 mm / 1.18”
DMX in shield
LedSync thru +
10 mm / 0.39”
LedSync thru LedSync shield
Group 1
50 mm / 1.97”
Group 2
LINEARdrive 100D
Group 3
12-28V / 6A Direct voltage controlled LED driver
Group 4
M
153 mm / 6.02”
Wiring Diagram
{
24V
VDC - VDC +
Not connected
TC
DMX in +
DMX in -
DMX in +
DMX in DMX in shield
Ext in
Ext in +
LED supply +
DMX in shield
LedSync thru +
LedSync thru LedSync shield
Group 1
LINEARdrive 100D
12-28V / 6A Direct voltage controlled LED driver
Group 2
Group 3
RGB LED strip
+
R
G
B
Group 4
M
Not connected
See installation / driver instructions for details.
Must order power supply separately
410 381 1497 inter-lux.com [email protected]
Inter-lux reserves the right to make technical changes without notice.
4
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement